parlatype-1.5.4/0000755000175000017500000000000013204324054010520 500000000000000parlatype-1.5.4/INSTALL0000644000175000017500000003661013171727131011505 00000000000000Installation Instructions ************************* Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation, Inc. Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright notice and this notice are preserved. This file is offered as-is, without warranty of any kind. Basic Installation ================== Briefly, the shell command `./configure && make && make install' should configure, build, and install this package. The following more-detailed instructions are generic; see the `README' file for instructions specific to this package. Some packages provide this `INSTALL' file but do not implement all of the features documented below. The lack of an optional feature in a given package is not necessarily a bug. More recommendations for GNU packages can be found in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). It can also use an optional file (typically called `config.cache' and enabled with `--cache-file=config.cache' or simply `-C') that saves the results of its tests to speed up reconfiguring. Caching is disabled by default to prevent problems with accidental use of stale cache files. If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If you are using the cache, and at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.ac' (or `configure.in') is used to create `configure' by a program called `autoconf'. You need `configure.ac' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. Running `configure' might take a while. While running, it prints some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and documentation. When installing into a prefix owned by root, it is recommended that the package be configured and built as a regular user, and only the `make install' phase executed with root privileges. 5. Optionally, type `make installcheck' to repeat any self-tests, but this time using the binaries in their final installed location. This target does not install anything. Running this target as a regular user, particularly if the prior `make install' required root privileges, verifies that the installation completed correctly. 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is also a `make maintainer-clean' target, but that is intended mainly for the package's developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution. 7. Often, you can also type `make uninstall' to remove the installed files again. In practice, not all packages have tested that uninstallation works correctly, even though it is required by the GNU Coding Standards. 8. Some packages, particularly those that use Automake, provide `make distcheck', which can by used by developers to test that all other targets like `make install' and `make uninstall' work correctly. This target is generally not run by end users. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. Run `./configure --help' for details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here is an example: ./configure CC=c99 CFLAGS=-g LIBS=-lposix *Note Defining Variables::, for more details. Compiling For Multiple Architectures ==================================== You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. This is known as a "VPATH" build. With a non-GNU `make', it is safer to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. On MacOS X 10.5 and later systems, you can create libraries and executables that work on multiple system types--known as "fat" or "universal" binaries--by specifying multiple `-arch' options to the compiler but only a single `-arch' option to the preprocessor. Like this: ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ CPP="gcc -E" CXXCPP="g++ -E" This is not guaranteed to produce working output in all cases, you may have to build one architecture at a time and combine the results using the `lipo' tool if you have problems. Installation Names ================== By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PREFIX', where PREFIX must be an absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you pass the option `--exec-prefix=PREFIX' to `configure', the package uses PREFIX as the prefix for installing programs and libraries. Documentation and other data files still use the regular prefix. In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. In general, the default for these options is expressed in terms of `${prefix}', so that specifying just `--prefix' will affect all of the other directory specifications that were not explicitly provided. The most portable way to affect installation locations is to pass the correct locations to `configure'; however, many packages provide one or both of the following shortcuts of passing variable assignments to the `make install' command line to change installation locations without having to reconfigure or recompile. The first method involves providing an override variable for each affected directory. For example, `make install prefix=/alternate/directory' will choose an alternate location for all directory configuration variables that were expressed in terms of `${prefix}'. Any directories that were specified during `configure', but not in terms of `${prefix}', must each be overridden at install time for the entire installation to be relocated. The approach of makefile variable overrides for each directory variable is required by the GNU Coding Standards, and ideally causes no recompilation. However, some platforms have known limitations with the semantics of shared libraries that end up requiring recompilation when using this method, particularly noticeable in packages that use GNU Libtool. The second method involves providing the `DESTDIR' variable. For example, `make install DESTDIR=/alternate/directory' will prepend `/alternate/directory' before all installation names. The approach of `DESTDIR' overrides is not required by the GNU Coding Standards, and does not work on platforms that have drive letters. On the other hand, it does better at avoiding recompilation issues, and works well even when some directory options were not specified in terms of `${prefix}' at `configure' time. Optional Features ================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. For packages that use the X Window System, `configure' can usually find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. Some packages offer the ability to configure how verbose the execution of `make' will be. For these packages, running `./configure --enable-silent-rules' sets the default to minimal output, which can be overridden with `make V=1'; while running `./configure --disable-silent-rules' sets the default to verbose, which can be overridden with `make V=0'. Particular systems ================== On HP-UX, the default C compiler is not ANSI C compatible. If GNU CC is not installed, it is recommended to use the following options in order to use an ANSI C compiler: ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" and if that doesn't work, install pre-built binaries of GCC for HP-UX. HP-UX `make' updates targets which have the same time stamps as their prerequisites, which makes it generally unusable when shipped generated files such as `configure' are involved. Use GNU `make' instead. On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot parse its `' header file. The option `-nodtk' can be used as a workaround. If GNU CC is not installed, it is therefore recommended to try ./configure CC="cc" and if that doesn't work, try ./configure CC="cc -nodtk" On Solaris, don't put `/usr/ucb' early in your `PATH'. This directory contains several dysfunctional programs; working variants of these programs are available in `/usr/bin'. So, if you need `/usr/ucb' in your `PATH', put it _after_ `/usr/bin'. On Haiku, software installed for all users goes in `/boot/common', not `/usr/local'. It is recommended to use the following options: ./configure --prefix=/boot/common Specifying the System Type ========================== There may be some features `configure' cannot figure out automatically, but needs to determine by the type of machine the package will run on. Usually, assuming the package is built to be run on the _same_ architectures, `configure' can figure that out, but if it prints a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: CPU-COMPANY-SYSTEM where SYSTEM can have one of these forms: OS KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the machine type. If you are _building_ compiler tools for cross-compiling, you should use the option `--target=TYPE' to select the type of system they will produce code for. If you want to _use_ a cross compiler, that generates code for a platform different from the build platform, you should specify the "host" platform (i.e., that on which the generated programs will eventually be run) with `--host=TYPE'. Sharing Defaults ================ If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. Defining Variables ================== Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set them in the `configure' command line, using `VAR=value'. For example: ./configure CC=/usr/local2/bin/gcc causes the specified `gcc' to be used as the C compiler (unless it is overridden in the site shell script). Unfortunately, this technique does not work for `CONFIG_SHELL' due to an Autoconf limitation. Until the limitation is lifted, you can use this workaround: CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash `configure' Invocation ====================== `configure' recognizes the following options to control how it operates. `--help' `-h' Print a summary of all of the options to `configure', and exit. `--help=short' `--help=recursive' Print a summary of the options unique to this package's `configure', and exit. The `short' variant lists options used only in the top level, while the `recursive' variant lists options also present in any nested packages. `--version' `-V' Print the version of Autoconf used to generate the `configure' script, and exit. `--cache-file=FILE' Enable the cache: use and save the results of the tests in FILE, traditionally `config.cache'. FILE defaults to `/dev/null' to disable caching. `--config-cache' `-C' Alias for `--cache-file=config.cache'. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. To suppress all normal output, redirect it to `/dev/null' (any error messages will still be shown). `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `--prefix=DIR' Use DIR as the installation prefix. *note Installation Names:: for more details, including other options available for fine-tuning the installation locations. `--no-create' `-n' Run the configure checks, but stop before creating any output files. `configure' also accepts some other, not widely useful, options. Run `configure --help' for more details. parlatype-1.5.4/data/0000755000175000017500000000000013204324053011430 500000000000000parlatype-1.5.4/data/Makefile.in0000644000175000017500000006133413204324006013422 00000000000000# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ @LIBREOFFICE_TRUE@am__append_1 = com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in subdir = data DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(appdatadir)" \ "$(DESTDIR)$(dbusservicedir)" "$(DESTDIR)$(desktopdir)" DATA = $(appdata_DATA) $(dbusservice_DATA) $(desktop_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ distdir am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ APPDATA_VALIDATE = @APPDATA_VALIDATE@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DESKTOP_FILE_VALIDATE = @DESKTOP_FILE_VALIDATE@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ GTKDOC_CHECK = @GTKDOC_CHECK@ GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ GTKDOC_REBASE = @GTKDOC_REBASE@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ HELP_DIR = @HELP_DIR@ HTML_DIR = @HTML_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ ITSTOOL = @ITSTOOL@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ WARNINGCFLAGS = @WARNINGCFLAGS@ XGETTEXT = @XGETTEXT@ XMLLINT = @XMLLINT@ YELP_LC_DIST = @YELP_LC_DIST@ YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gsettingsschemadir = @gsettingsschemadir@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ intltool__v_merge_options_ = @intltool__v_merge_options_@ intltool__v_merge_options_0 = @intltool__v_merge_options_0@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = icons desktopdir = $(datadir)/applications desktop_in_files = com.github.gkarsay.parlatype.desktop.in desktop_DATA = $(desktop_in_files:.desktop.in=.desktop) gsettings_SCHEMAS = com.github.gkarsay.parlatype.gschema.xml appdatadir = $(datadir)/metainfo appdata_in_files = com.github.gkarsay.parlatype.appdata.xml.in \ $(am__append_1) appdata_DATA = $(appdata_in_files:.xml.in=.xml) dbusservicedir = $(datadir)/dbus-1/services dbusservice_DATA = com.github.gkarsay.parlatype.service CLEANFILES = \ $(appdata_DATA) \ $(dbusservice_DATA) \ $(desktop_DATA) EXTRA_DIST = \ com.github.gkarsay.parlatype.gschema.xml \ $(desktop_in_files) \ $(appdata_in_files) all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-appdataDATA: $(appdata_DATA) @$(NORMAL_INSTALL) @list='$(appdata_DATA)'; test -n "$(appdatadir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(appdatadir)'"; \ $(MKDIR_P) "$(DESTDIR)$(appdatadir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appdatadir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(appdatadir)" || exit $$?; \ done uninstall-appdataDATA: @$(NORMAL_UNINSTALL) @list='$(appdata_DATA)'; test -n "$(appdatadir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(appdatadir)'; $(am__uninstall_files_from_dir) install-dbusserviceDATA: $(dbusservice_DATA) @$(NORMAL_INSTALL) @list='$(dbusservice_DATA)'; test -n "$(dbusservicedir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(dbusservicedir)'"; \ $(MKDIR_P) "$(DESTDIR)$(dbusservicedir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dbusservicedir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(dbusservicedir)" || exit $$?; \ done uninstall-dbusserviceDATA: @$(NORMAL_UNINSTALL) @list='$(dbusservice_DATA)'; test -n "$(dbusservicedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(dbusservicedir)'; $(am__uninstall_files_from_dir) install-desktopDATA: $(desktop_DATA) @$(NORMAL_INSTALL) @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(desktopdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(desktopdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(desktopdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(desktopdir)" || exit $$?; \ done uninstall-desktopDATA: @$(NORMAL_UNINSTALL) @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(desktopdir)'; $(am__uninstall_files_from_dir) # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-local check: check-recursive all-am: Makefile $(DATA) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(appdatadir)" "$(DESTDIR)$(dbusservicedir)" "$(DESTDIR)$(desktopdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-appdataDATA install-dbusserviceDATA \ install-desktopDATA install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-appdataDATA uninstall-dbusserviceDATA \ uninstall-desktopDATA .MAKE: $(am__recursive_targets) check-am install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ check-am check-local clean clean-generic clean-libtool \ cscopelist-am ctags ctags-am distclean distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-appdataDATA \ install-data install-data-am install-dbusserviceDATA \ install-desktopDATA install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am uninstall-appdataDATA uninstall-dbusserviceDATA \ uninstall-desktopDATA @INTLTOOL_DESKTOP_RULE@ install-desktop-database: install-desktopDATA update-desktop-database $(DESTDIR)$(desktopdir) @GSETTINGS_RULES@ @INTLTOOL_XML_RULE@ com.github.gkarsay.parlatype.service: Makefile $(AM_V_GEN) (echo '[D-BUS Service]'; \ echo 'Name=com.github.gkarsay.parlatype'; \ echo 'Exec=${bindir}/parlatype --gapplication-service') > $@.tmp && \ mv $@.tmp $@ check-local: $(desktop_DATA) $(appdata_DATA) $(DESKTOP_FILE_VALIDATE) $(desktop_DATA) $(APPDATA_VALIDATE) validate-relax --nonet $(appdata_DATA) # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: parlatype-1.5.4/data/icons/0000755000175000017500000000000013204324053012543 500000000000000parlatype-1.5.4/data/icons/32x32/0000755000175000017500000000000013204324053013324 500000000000000parlatype-1.5.4/data/icons/32x32/apps/0000755000175000017500000000000013204324053014267 500000000000000parlatype-1.5.4/data/icons/32x32/apps/com.github.gkarsay.parlatype.png0000644000175000017500000000333213176574164022437 00000000000000PNG  IHDR szzsBIT|d pHYs B(xtEXtSoftwarewww.inkscape.org<WIDATXWoSe?ڮ؛lED^c J8QĿACOD' ! Fc lknkח9†D'}s~w~< ίW8A5B~.7$B<1$MDELQUd3p0xﾄIu.eQ rkWH9ЙB5"4P0PA2Jt䤹8 |V)_ Een /Mع1i2RxΜ;脙?Z[aw:_fHM .ͼi2- VBKs`vV> _<G-5'd 0UaI.dBTG8:; 'yX&FKAaV8x0#0ִq2 &B0E/VU+:dڴ('9l]97Ai tV4QQ0<|,YiͲ3w@_uu5|pKXjg׀$w LTWZPد9*!72 /\Ьq1@<4.ыĽ7$P#p$ l@\r2MU+a;6 -&ycߟ?t&^ע Hi> (-DA:]o[v& e3R0k_YL@uVDA /0}8j߇ _LÍ_n_?ϥm:يׯ߀^X?pC e="Թ$, Tʾw7IikY" yz3<7t8'TX,V PY. = 2щvRe G]˃O׷uݺxtQnܨb$d=xvO4044000x;BEG%O.P3yC] I^0:>=uRd޺e`Z##h!g~X)QaZ $τ׆ J;A} V3IENDB`parlatype-1.5.4/data/icons/Makefile.in0000644000175000017500000005435413204324006014541 00000000000000# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = data/icons DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(icon16dir)" "$(DESTDIR)$(icon22dir)" \ "$(DESTDIR)$(icon24dir)" "$(DESTDIR)$(icon256dir)" \ "$(DESTDIR)$(icon32dir)" "$(DESTDIR)$(icon48dir)" \ "$(DESTDIR)$(iconscalabledir)" DATA = $(icon16_DATA) $(icon22_DATA) $(icon24_DATA) $(icon256_DATA) \ $(icon32_DATA) $(icon48_DATA) $(iconscalable_DATA) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ APPDATA_VALIDATE = @APPDATA_VALIDATE@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DESKTOP_FILE_VALIDATE = @DESKTOP_FILE_VALIDATE@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ GTKDOC_CHECK = @GTKDOC_CHECK@ GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ GTKDOC_REBASE = @GTKDOC_REBASE@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ HELP_DIR = @HELP_DIR@ HTML_DIR = @HTML_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ ITSTOOL = @ITSTOOL@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ WARNINGCFLAGS = @WARNINGCFLAGS@ XGETTEXT = @XGETTEXT@ XMLLINT = @XMLLINT@ YELP_LC_DIST = @YELP_LC_DIST@ YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gsettingsschemadir = @gsettingsschemadir@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ intltool__v_merge_options_ = @intltool__v_merge_options_@ intltool__v_merge_options_0 = @intltool__v_merge_options_0@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ icon16dir = $(datadir)/icons/hicolor/16x16/apps icon16_DATA = 16x16/apps/com.github.gkarsay.parlatype.png icon22dir = $(datadir)/icons/hicolor/22x22/apps icon22_DATA = 22x22/apps/com.github.gkarsay.parlatype.png icon24dir = $(datadir)/icons/hicolor/24x24/apps icon24_DATA = 24x24/apps/com.github.gkarsay.parlatype.png icon32dir = $(datadir)/icons/hicolor/32x32/apps icon32_DATA = 32x32/apps/com.github.gkarsay.parlatype.png icon48dir = $(datadir)/icons/hicolor/48x48/apps icon48_DATA = 48x48/apps/com.github.gkarsay.parlatype.png icon256dir = $(datadir)/icons/hicolor/256x256/apps icon256_DATA = 256x256/apps/com.github.gkarsay.parlatype.png iconscalabledir = $(datadir)/icons/hicolor/scalable/apps iconscalable_DATA = scalable/apps/com.github.gkarsay.parlatype-symbolic.svg gtk_update_icon_cache = gtk-update-icon-cache -f -t $(datadir)/icons/hicolor EXTRA_DIST = \ $(icon16_DATA) \ $(icon22_DATA) \ $(icon24_DATA) \ $(icon32_DATA) \ $(icon48_DATA) \ $(icon256_DATA) \ $(iconscalable_DATA) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/icons/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-icon16DATA: $(icon16_DATA) @$(NORMAL_INSTALL) @list='$(icon16_DATA)'; test -n "$(icon16dir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(icon16dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(icon16dir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(icon16dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(icon16dir)" || exit $$?; \ done uninstall-icon16DATA: @$(NORMAL_UNINSTALL) @list='$(icon16_DATA)'; test -n "$(icon16dir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(icon16dir)'; $(am__uninstall_files_from_dir) install-icon22DATA: $(icon22_DATA) @$(NORMAL_INSTALL) @list='$(icon22_DATA)'; test -n "$(icon22dir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(icon22dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(icon22dir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(icon22dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(icon22dir)" || exit $$?; \ done uninstall-icon22DATA: @$(NORMAL_UNINSTALL) @list='$(icon22_DATA)'; test -n "$(icon22dir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(icon22dir)'; $(am__uninstall_files_from_dir) install-icon24DATA: $(icon24_DATA) @$(NORMAL_INSTALL) @list='$(icon24_DATA)'; test -n "$(icon24dir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(icon24dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(icon24dir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(icon24dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(icon24dir)" || exit $$?; \ done uninstall-icon24DATA: @$(NORMAL_UNINSTALL) @list='$(icon24_DATA)'; test -n "$(icon24dir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(icon24dir)'; $(am__uninstall_files_from_dir) install-icon256DATA: $(icon256_DATA) @$(NORMAL_INSTALL) @list='$(icon256_DATA)'; test -n "$(icon256dir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(icon256dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(icon256dir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(icon256dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(icon256dir)" || exit $$?; \ done uninstall-icon256DATA: @$(NORMAL_UNINSTALL) @list='$(icon256_DATA)'; test -n "$(icon256dir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(icon256dir)'; $(am__uninstall_files_from_dir) install-icon32DATA: $(icon32_DATA) @$(NORMAL_INSTALL) @list='$(icon32_DATA)'; test -n "$(icon32dir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(icon32dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(icon32dir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(icon32dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(icon32dir)" || exit $$?; \ done uninstall-icon32DATA: @$(NORMAL_UNINSTALL) @list='$(icon32_DATA)'; test -n "$(icon32dir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(icon32dir)'; $(am__uninstall_files_from_dir) install-icon48DATA: $(icon48_DATA) @$(NORMAL_INSTALL) @list='$(icon48_DATA)'; test -n "$(icon48dir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(icon48dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(icon48dir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(icon48dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(icon48dir)" || exit $$?; \ done uninstall-icon48DATA: @$(NORMAL_UNINSTALL) @list='$(icon48_DATA)'; test -n "$(icon48dir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(icon48dir)'; $(am__uninstall_files_from_dir) install-iconscalableDATA: $(iconscalable_DATA) @$(NORMAL_INSTALL) @list='$(iconscalable_DATA)'; test -n "$(iconscalabledir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(iconscalabledir)'"; \ $(MKDIR_P) "$(DESTDIR)$(iconscalabledir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconscalabledir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(iconscalabledir)" || exit $$?; \ done uninstall-iconscalableDATA: @$(NORMAL_UNINSTALL) @list='$(iconscalable_DATA)'; test -n "$(iconscalabledir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(iconscalabledir)'; $(am__uninstall_files_from_dir) tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(icon16dir)" "$(DESTDIR)$(icon22dir)" "$(DESTDIR)$(icon24dir)" "$(DESTDIR)$(icon256dir)" "$(DESTDIR)$(icon32dir)" "$(DESTDIR)$(icon48dir)" "$(DESTDIR)$(iconscalabledir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-icon16DATA install-icon22DATA \ install-icon24DATA install-icon256DATA install-icon32DATA \ install-icon48DATA install-iconscalableDATA @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-data-hook install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-icon16DATA uninstall-icon22DATA \ uninstall-icon24DATA uninstall-icon256DATA \ uninstall-icon32DATA uninstall-icon48DATA \ uninstall-iconscalableDATA @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) uninstall-hook .MAKE: install-am install-data-am install-strip uninstall-am .PHONY: all all-am check check-am clean clean-generic clean-libtool \ cscopelist-am ctags-am distclean distclean-generic \ distclean-libtool distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am \ install-data-hook install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am \ install-icon16DATA install-icon22DATA install-icon24DATA \ install-icon256DATA install-icon32DATA install-icon48DATA \ install-iconscalableDATA install-info install-info-am \ install-man install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am tags-am uninstall uninstall-am uninstall-hook \ uninstall-icon16DATA uninstall-icon22DATA uninstall-icon24DATA \ uninstall-icon256DATA uninstall-icon32DATA \ uninstall-icon48DATA uninstall-iconscalableDATA install-data-hook: update-icon-cache uninstall-hook: update-icon-cache update-icon-cache: @-if test -z "$(DESTDIR)"; then \ echo "Updating Gtk icon cache."; \ $(gtk_update_icon_cache); \ else \ echo "*** Icon cache not updated. After (un)install, run this:"; \ echo "*** $(gtk_update_icon_cache)"; \ fi # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: parlatype-1.5.4/data/icons/48x48/0000755000175000017500000000000013204324053013342 500000000000000parlatype-1.5.4/data/icons/48x48/apps/0000755000175000017500000000000013204324053014305 500000000000000parlatype-1.5.4/data/icons/48x48/apps/com.github.gkarsay.parlatype.png0000644000175000017500000000520213176574164022453 00000000000000PNG  IHDR00WsBIT|d pHYs B(xtEXtSoftwarewww.inkscape.org< IDATh՚k\E53݄< <7 B#BT~R<,PZF4F bPSbIDD Ynnv7;ﹷpqfd)9}1B/j3o[em:zTZqדm۞PZ8yؖ'r1F֭_l=unJ )%yd5!$Z+~Dqrr?}1jN[ܻooBq\| "] ޖ&JQ.ٺ7 _s nڴ)aY8`PJ-Zp]um7-=;Fmр5F_)*2 paYRȓ-u=\T*1=W)/"vstaNSˤmX< KBP(s%Q*" r4H$S`b(hN-?%}/\.S(T*hmH*C5\*st75hbbj"FQIs-{ɩ '%LUme4'ٱa ZҀ@}?f|+c[}gd@JŅI\]uA*(B&:vvtٍ-L:f K&&^R Yn9czct/3^JIggG,'21 &P])kg ٍu]^ _k녙h˺e":+`<~MG$lݻ KZ(rU&nYFy@YTQi֞wn GFGm'f@`Y6=tUW^I6J<`Z~M,*)n'nn$慚\m|lG?([RyhV S H D[:m%}Wd2sq|U @lܰ!2پ[J31V>D)$,Շ56¥\s0k֬'M|>嗿ޞ&MAz:(sMF,15 ض<4@ME{/c(02=3J (s4FӱT 6 @ 02 ]L2uҚ]z)K1-N0P*cV1qJw7r_0e5#~KHxnZFZqGA\bڋ1TsіhP(RWGrsդ%-^Ԓ=PjBUz˥n|iY8ϚXpqy`tBe#@U%R%p "GnZwwu Zhlb6c|_ƶ,:;TQ7/PJ}NUꓥyH[ч4M&眹a׭m, 0s>9bll(TEƘEi:hUFw?ys<2r7J)RH:cBHB;O3=}id{/^iʦ6ţ333M5ZGh۽D I:pb9ǃkO_hc@}F|eG9Ka.\<@snHQ959{f!(%qkje I@@ cXkpIUXgɲ iBJIU8u k-J+6[ǎgc\B Ę ߰Z4@y퍷}w7A^4Ͱ#1$I)%b7{?IM.i6nX'{]*wIc̭`T!S?̖'9L)umOmᗳg#DJE$gY ׈J$Jv}} ff2gٍpf2ITȑ .UL`aE_/RH$iBfn}cEJ>/|Jp< "@J7B HMBO&"J) 1GMFE@JKf`V.<'yƶT#R.?'KKKeIG5)wI=/|y+LJ).a2)>ۮDP8~3o}ڭ]fertfCC  I(bpp&Xp^Bl sOfh rX_zǗ֮]WT*T*jgΜ1WƁ98˳ ߑ ?!,B^`X;-0\!ؿ@iIENDB`parlatype-1.5.4/data/icons/scalable/0000755000175000017500000000000013204324053014311 500000000000000parlatype-1.5.4/data/icons/scalable/apps/0000755000175000017500000000000013204324053015254 500000000000000parlatype-1.5.4/data/icons/scalable/apps/com.github.gkarsay.parlatype-symbolic.svg0000644000175000017500000001326213176574164025261 00000000000000 image/svg+xml Gnome Symbolic Icon Theme Gnome Symbolic Icon Theme parlatype-1.5.4/data/icons/16x16/0000755000175000017500000000000013204324053013330 500000000000000parlatype-1.5.4/data/icons/16x16/apps/0000755000175000017500000000000013204324053014273 500000000000000parlatype-1.5.4/data/icons/16x16/apps/com.github.gkarsay.parlatype.png0000644000175000017500000000113013176574164022435 00000000000000PNG  IHDR(-SsBITO pHYs B(xtEXtSoftwarewww.inkscape.org<PLTE```TXTUYQXZVXZUZ]XZ\XVXTWYU.467<>ELLFKLPUUQVVTZYUWS]cbbgejpnkonkqolrpmrqnrpžſǿSA tRNS@ElIDAT].CA"J*؀ "?Dn{gKдP"VPL/Cl.J0JJ+k7o!N&<))-69Ur'yFAiY \GO ԏ~. `Q.&c@~ y@IENDB`parlatype-1.5.4/data/icons/256x256/0000755000175000017500000000000013204324053013504 500000000000000parlatype-1.5.4/data/icons/256x256/apps/0000755000175000017500000000000013204324053014447 500000000000000parlatype-1.5.4/data/icons/256x256/apps/com.github.gkarsay.parlatype.png0000644000175000017500000006300013176574164022615 00000000000000PNG  IHDR\rfsBIT|d pHYs B(xtEXtSoftwarewww.inkscape.org<e}IDATx}%E_}ss''D2HUQ aeW]sw}>uM>Sq$agnuUwuuuwu:{PJj^jjm7Lښk1.ڀp, M\RQ9, !$A蛊A]"ߣ~6@s-V@ . ePsp૿Әj"_nK|"h iaG^WEP$B-w+F1&?\u8ᷥvR"h"g$-ζUVu~}%W^68?\/TS؛>3i3{ٷs۷oݺujlll^jDQB PFh}k^s>cӦ#_;08p&>e|NhZ4Ѐ)öm߾m}{?zQs\(ʀ@-@).$:/[x!]tWoXrk:[-ò,'hE'(o翪]j j*3#?GUA#(%(\h_-ַͺuk/ikokkmm{6\|8gP >^,|qPj{ @\\Eݟ,(Jfgfaffz[o{%\ER0^$_W8s;mjWlkI ` )γ}(}\ GR@! @+/:ꨣ.mu]0AC(2w.\4@sIAx92e1KoB ed6>ScǎMo'xbRJCːv,? ?~*E짧lH(j*QoGqعs5guֻ;f%%P;ZJ??׾>@iB`68U\I9bwX y4 7`3|zy+J@Džbq{Wg+#EjD-8#dŊ @wW7D>p2E?lUclQ~OHbj@o\p?X3e.Ga_hA* jQ3tXȁY~"ijjͣL}-W-[?MkHY~ѹ6h,L "?N>MxWWWt2})î)܋+#?ϯy&pP|? UϞ)fGwӑKG4 qt@@wQgg f y@ !A+BD(%8q ݴXͣO(E#Z~_}޹p~vr) (1gyM|{{G[ >>+FqĒ⫤EҴ^pfPsKBo/gh?D67UCLn' *%'?C!eB+Цy_օEN{nBO|χ,Ėa}~!j"C~OJ(ۇV} V[}d7uQrk[+˒=3/dl<|EE.~ w(w5#PYǠׅ?eWugD DhjL&_c( I/jWh%`P2ҥKOݸq͛7s7eMn*"*So"8?c >ۅr8*)WeDpڮr\hB8l@alnQa;y'J@ P{LP[Z%V]u+Ġ&LeDhk^vx_W6GH8Ğ!`srK8O^8?W0@KjSN=<% N>LȤ \xUX0+ #:pQjFwFӇSOFt+ϡ?)l P2YR8kD6ۯzUO|Jٰ̇󺺺>1333!@nasTܮ(oc ʫm)I)6?_ kj.S[oHi2e$ϸ(*8*P{7;ҺqeT0FK}*ކ޽pn ڜ<zO0K\˱و8@m;͚B} + ~4~_@:{Q,&|(I 4W(Ŵ^Ͻ X`kxK'U߽DžM=zEE`P@k=5r kBOf.pGEW`彏i_ 'p] @Dj'r/9O¾ ώo mmK#?l٪(JCiR= ťxaʳfy ң;miaZ%^V T9@"> _m(O5ni.QZ{EjXPB֭4 xՖHm3JpȈ8/HPĶҨ_,;OƓJW΅`j_0K}ᖐd0!~0q~ ƞ="^\CqVW1_L0Y"RED|%PI<[aPUu߫(eg`X<\kKiKhq%Q~Zj /Iƈ8RzUo9 #jH.ԄDB 87z<\Ϥq 6Ԏ3al^nL|WK"6)OAt%D}WBv3tsuOb%5Ȓ@I@мPi̷Igjf?u?'<X>E3,> " >Mqa+(Hz /u7;yD%?KUZ2؅Z"\+|S9FzEg/ .Z{vڂ$us1G]Ta*^z~dl.wQayX,LsŢg0#q:/m\ A[[>xL5\7T0^g B;ȫ}GzQ%UKoZ*$L P1_}{`߁}P,4%MLwnpaIê] }}Be1QH׼(ᅓ@\ R/J^3 a/TKG  |$HNm[`zf))0Gqr<1iul|&&`ͪ5؍dHj6WԜwR*$z) `%! uK =EB2j{e_s:۽w޳oDZC%TX,Kk$I& 0DŽ; Xf-k퍨DjFcY~YiJY 2\`$`H(9,η#`>xYO_la|blqe =idazf1ޙ~| 90hkmh*}O|X/EM_M]"Gl7Эy 0 [" f/J!y?js,1ZpLǐq$˂7\Ԧ~Mᾘˊ|V Ul?W-\w܂_ '97F4wjiie eӓ066 ==a_P{*&(ɍmEdO) C`3ʐ% n'wn+$UI}#JA&Vk+{AjohB 1AG* E`v[{>{:Dd #E =980Aގ鼈p ѱ"_ .YE"Ҡ l>E0@"y܃„).yY[0??:YLUaU Bbb -b 03;S_is h}xIZ[&,aPA,Y*JpUt/L ~-LXI>otGepg*5Q:0JP!3* lXGY99HpGͩ5‘Bc~^o h:;: :;ߝ(MY?7sC?(pxQvZb_+mXF jyxbWrYTYkOz[tA_? @{ =ajjj&&arrEP  r@T a y>팛0(e=Z%0п{X`xff&Fatl86,eeZ9 ?EIYbtВeL|Xb =S BX  yHV˻%4J)@ths,$lٶ nX1OsLOOq2MWW'.V ֭  k׬F%]Av.ܞ7%4L*"b!`5n`}x^xbؼu+ m~zظaw1p'U݄W2GqaU&e퍰(X9(`L@H@4x\ "rO?2 BlBА Dmͪu Z'۶Ýww}7aaئ'=׳֬^ |2St"tt fҭ]:n;Y}D@S}eԌ`qFx*Y[T^Yo}5;w킟_u;uxs/} מ! "Y(1'hԗGJPx"Y@*ȈEJ!A=X /[??W_7|#Db!fǑp az{`xd?ݿ%0hR >W]X);5x~ȇ@/aV?G+ ~(Fc%o} <UvHj޻ U3_R F\0+*D@aC!h mOqBuo ֺ~? \{ԧg?o~QZ~@;۞l԰FKPDӄw@# [4hYKDž tWҶᗿooFFGQ,zg?.8.β9]]p؆ML &tWYT=$P{PkvZf _\TY==püu|Bno ^ 8 ;%o;X/R:!j7Ȇpa;b,tD߮ݻk&|mp0.$-5 7}n@)cJ`ݰ_?m!$ hX~dStٹVKWjOw0yffg?[ȇ?!hHsۃX 2%T@q@7M5Kbia|aW'bӺ%]X_.{J0S_ΈBz(ů>fs( I*8|Z+>{+W|KzϏ;^m2fCv& fwQb_@=4!.sQoM|4|Y}(:|b>ap*Xr:p`wrXSbG*H1Be2E$P/6P1PA@PAo<8&9X+Wf5׿]]ipI'z ;rnpw{G||NTûNE%f F!nLνciolb%=l<.tN;d[[S|y~=Zjg﵊dSԑhT`lЛFkEe֍$d]G+{e ;v}myiwK[L#kƉB=aro\eg,8_7|+_ݷߜ'pBu;hkaaa>;g[# @!%1 *ϭ MN7GaI./}.'n?4RQlwbBMB=s:gTQ)b/}s"ZZe ]uk64g@\5(L@SDV hZ@~qa8kוga?xvOMO;=qBUɏ<ؽgKEW8s] b>EŻlܙI@J.+`0p'h%Y~iTx 7EF9/jwu|o互׭/p ݇p=3FBWc9۲q5005:5ĩ~0*6mUrd׍x@mN8M欀?Gr> O~:3O|r8dg.+hE b3;ߊ.;.y|C+ta2L$^Mw߿ůV؟߮"$xN`m=9p٥VX|"ި&f!G'-}γhQ{~ 6 2KB!xd@% dH ьDkRx$w [|uhZznO:| oq|>^ST͎K(:‡vAW_W.[K"L@H "-t-X@ޢgA Z2_/ٺkcS2"ˎ$|e>7"AkUFsˢY˚ȫzG%@)1]g<_&nrFbիօvu7?Hk$٧c}dPPĤzD R!8Xusrm2*~, ~(@Y?Iorr<q#wv&RXooJ_?xj|h  stGtgYo ׫XU\~Р#T?+ (ZGxIU!rk&%j0' 8ȁ{)E ?Z~ǶUi-0<6=3^X{C(tL(4݋_{ ˅`>(> yS\O`'5=7+2Њ|ۭ­}/ T#BA_pABu}E굨?31WY0@R䟄|&¯@],cg>3X;<:ꍄ8/B ! {bK [۠ZEx糮@Nq4CW7 't"tw;<-XV3:tDFA (e0HH{+U:HժvRޟMIb¯? W,F[LpY#y&V=ͺ{Y dEUR.3蚈 :nZk !5 ~\>Y?Z"cVT^ cK$sN:)}bWOwOf"'(! ]42O +.@NgQi?=x3B~>zi~^O!419=z<3۪m` 43Mv 7r#xWG{P`_m _F_݅j+sl%3P7<RS*j$rH]mJm2]O;5gEy d݀ "c9:q{pݘ%j"F NMC!וOogmٚ^`ӟ%! r R Aa': oܰ!VT5ej@A5k/ħ~5\SҡP$UX?gejwv,\l *Jz׾XF44O>p4xf`k)Z*U 305٫ fœFn?GvX ezZhVik4`Y``Y7CĹ9㌤ kƓٲKV?LDroxȊW<EQG$YU7p|( ]\J 姰b@ ~iHxFs[ߘ/qY,]:ThaFgEB|' \B&OYtg;'QCщ@Dc5fg3( k ~|@^l%БP=i5Q HDh$ [~'F4B ("XR@HeK c]Kɩ@DtUZվ_B.@@Y/[pS@b*rtS\ ~Df8;}#0ܒdZEzRtFaXFԋh(hb:y߅S!\MY/'d5!H&H;H3(yo 6i jcIU݋O t R }xth&k 1W(@ ʁ)Ո9!AYfS`ID3J|p7Ni& `D"RMX3P*~.@ {} k" JZ\V,@Y47k5?ôc#1 :կ7nf]T b%V-Aˁbjv~&诳ҚU+Ww7hukMgHXV Z6؃~_җӟߩ.*k+vc:eMArRd(_f!%*\;w?NC+Z ݁i ۗW]U[:n$ZTElqpӂZP|WZR6HC)EPV|#*o 膾kUS;0 ~G5o ^XV[" '=zn n քڱs|쓟 opx~X,1=} - J|5n?<?X_Jr$::]Xueh x*04M?uQY _aoXB0j>_y~#ϋ:xG R ԕE(aGkCӳ eGU +r{3 ))7FMA>?='6+tϫ e?ٙp:1G?f +ᬻir@"P`_^#pZafuk@"n>4 Q?fCD1G \W_{ma=Bүpœ;Q6@ *Z!_Q܀udMNE"M^0~StEc{ݏ1{_MA\i#P*! F: A%Op ݶv:A–e^pL2lkeB]/z &'ԍh`YPB␿T719z?Ĥ&_0!ju=?fSd*0>X(@NGm` `|@0d .]ik/xu70'L5 )"jE3J uVzjpp^ amGjO!_l9fW*𷮓S o@4L"H3+o%HсZSLXX~|'?)xV$'H.n@o>!F")?sp^[MBԾ56&3*5_/Sc>kh})q8D dWuIkr7k1zv'_WA0[ A .ON4*(܀O= !VCMlG}L;P̅ Qg).ܴ5UC%J.53 UIDF>Iy$:335ؗQ.Bd61=K#@}7@($fO?X쬩-O~_-ʗ,vy-}>5p8*b2MOh0D,>) :dmr^mA)j" qilKz%y lȞ%$(0>\t590LCT+6{kVjZY~γ>N R(J1rM%<Zp!kV"|pO…|::U5Cj#/_^ge=$,c",.dk3x"`f RSN re-la +'&( ;dySPZl? @?p'VB`)"2F9mzQg߻eQAl jJ~fMBksere~,s7 @n"]E* ~XON RxMgm@ژ?(N c(!)d02v }BKqAK"%9 U<묳X8cƋdㆌM yf/Ky$@YS>0QJ /} \/x2߅̥RPskU_J֑)(2P6u0,.L (?_(a7] xK {+;d'Fuu"c}^cO~ ^[;l Vŵ hDpH0Z=v:2쇿]dG^4-CTD &%/|!¿}]Tڗ\*yM=F)Jqg)iPlo3߆ ~qJ`a_Y>Oa7dz=9/^JA+$u #o>O>3rFF]R]z/k!I@hUG"!`ASv? kWأooW:#u>YP[/<q85KiKs΁z|?n14T]n^"= -YC(6se1,m%}4|+* *]ZA{[{ȏR#&=§c.PUxrVXl!e\vgؾI6;P3N; N<'+~ąd GwKW?-$" j'S)~%-jd~kL:xd+BN7=07ƕ ](fODѨki%065Hl-Sk ҇-?M[ ź0:0=3 K,H^pdm|R8:~tK";.|۟c)9ʄ z)ԝA S,.dkϓlxҡg*4؀]+Q/4a܈p^P݌tHYIaB@\Z|[\S#: 9];voc{4˔ 7VӳMFNWn-qH[KdBhtgڣcTA[\7ï ^Q -]$c%VGg^܂.8h!9'4ֺ=Q JQ4(xrٴHӤP{AM@S"Y.>B<\$AX= a˦B"H2ϲ#0TpEi TGY,zL<>' %^p^d7@J%G]-%g[n=q1r|MZ'^Թ-d#8q?;_e~S$8PNMɰ=b+=0AReMMyɀO'|ω`f߻Ft kX.VC[lCu*wOمʪL6F2?UlN9!Xە+V[@n80A-$O_7q~" &eQ!.T^׀ A~ldd.Ob3OP4ۏkf m-3Ĺ"FC,V@pbsv'lܸ؞kՊ5nISuG)<#Q )8k>jPi@QnKnb=]=Z}p?=-[)d_Bx$JDp^-:q]e.j 5z~dB)F[W2 Mcmp{k; 6АVJDt"* xkBJH}N ~Ng=yK$I*̈́Ssn,RJܱQxbod32Oȷw,5ݖ-HOQdJv 4D=?'"\} 6ijXJ0~90W̯]]v6-Ρ x(H 1Fa጖;AVw2Yyp-5 ˑgf`jj *`Id~EAb`)7Wɞ/8+i\n;ZM?USj -OI3~pTnP4%`}=E:jՋmjSPE#ٟ#(tn-"t~ "c)fo\*H"!YeQ\⛂J`Ikky= O@1 t,?l)T<\#~2EixLA" :Lo}2y0C fpe^gF2۾[j>d=P1{B!w_ JQ4M^T#*K!&XKšj] N߫AU6 8Og8Q ѯ@#7^prLkyh) ,oݩIJ߫Hbc/݌S$ˠ`[~T7!HԄ.dQ^ -ֱþO$ "x.4.GNJM]B{ ;C '1D &q *a t"Ya$ e4"yQ41<$^[qpMASICa@"b ?bE3Pi6wD g2"iVhxHiGHha4Fʾ'ơh` *9o(C[oO rU0oj@oXp!]a((%:EB"{jU-L#%̧ 3?T˾P?ElU;8Ia% XM i<1@ C4Iu D(-^/dZm/N !_9H@Syzt+M(9!"pߒ"\(Je<Y d]'H/wOQ\O}v{  $ta>` ʫ$RQA)R;2FLS aK Uʂ]7 :P4ZADK~0@/ QDQžU x9 S[L]2Gd`ؚV ,qEҕI )lx@©n%B5e~@KdV)p3nM-Sr4Mr~ B`PXQ5 b= o%}TUOy?:KquAf}h0eBzrD@XB\#Ȃ MJ0 -AKSUE0"9BA*#5I\)8_/4jXzxvU5P4t$$&za` ~8_(hRu"4ŃVM( ]Ov%|š@&.ģT^%Эpp*YIH(BЗ,mbHHohIm2wxs!P)%'uVDtC"[LxLVfE:nT6p*J@z$/<*Wʾ!{m@f{χ@.mLo0+ p HQ` x?dny-%DFYy9G ug|q&!›ceE64; ?,g7h񰵗"P-1E`y8zP|BD-P*+,}Tbm:yOlp@\Gn'''„V}\E"j}be0m %/gOD[#RN4=ζ5)XfO{y@m **0GVH;"'-Byzb4nnBe)Q%@k bgoϏ=~ӡ qLWn $V /yJ)H; /ɿ(?K ~nW >߹ID,?0n 3:q@hcJua-,,L*_(* (4Ïs΂K|hm9R_I]˧d7gC{˚ѢB_P5aAV?\ "="JE"s̓-ݚmy~"Zw‚#}쏊(lhxkY&+<ȍW.{ueah;M/c ~^.["O$JȀ l4@pgj73+€ %o%(4DYBE_d{#~IodmmבNٖ30:Ǣφwr,.{ | 枞~˦.@@+qgs@3!rlOԾT>''`={zOw;'qZqjQsrG{9]=mq&?E]T6 k$eHQb=e`}|܀LF"&L \Xp ]G5_~K\P?~}ڶ=# h'i @"i@5;333>a@gWGR62(ϘA G0&f7s~a 茁7ߕ#02<rU[lyeT4n@]@*Ν;kW썭mlhGg/@Y1ŖE XBZ԰ᢿ"-т~3X8?Ak:H,cHt)sx$la~&?<< |{oף(¿9 H"P,;Xrڳ>h7M-M'/Bm=F s%4@j)@Y`c?I~95žRUBT#nÄ '6/stXd  \6h?ۮ Wwvt|Iatuv' ATnSm;<aN(xcg 1)cR 3i](6fd .lL0bbpG??+0.) P-/#Dqsö+ǻ>e t܁Nhw\J(6zhpO꼷eWr2 4=6y8gf`||FGFoopNF?) l<wğz@ost;Gs:Gs}k^W?oZcĄiV FOQ!TXsVBLL݁hY"xHo.}7 Jcvv&aϾګ7o &1D@RhPB{֯_/~yׯ]]ݜŝ'@AV~zՁrk0G r2xO8nzA5R*>u4RY'YU ZBծG'?67zۮO*Q<ŸK(JWP@6 tGQm=:?^li{G;t:JDn T -6qd bŌ~/q,w揻?EQ1X}e!dGٴ`> <aUTy~{ǝ 㒀OJǔt.6_W X (#q/*Ξem8l '<[r,D-ބ!~g/B⼂v^sL-Ye );>gWZx;}?ľ}v9(Vf?J[Tw+%(Ia -Y;0;dv䴪xy"W 4sJ*CE5+}8e{ss3N8(ٱ)霸_h@ `i@F? .ЄP*cSFs-w?'*3VV32*e ?@AA YEELIU"H 'ʜ,V0Z⪒fDmT_H:,vI (@ BemF)qT09龨҄P#*], Ѝ4&=؄`|4 ##P_+eBF %YKB/ K @ A{x*~PP{!m #CO$A2oppI?.@-8}-L5llI+ G)~%]u^@ #f]쟍ܞ"?(B'L/]D((Ge BTRŹ:%`k]'~e  F["%)gMeWkqQ>g-f @@#Īu'1pMi*hz ~@"ˮ7WS{n #&\~UA&T͵XBBh ~s5*^P\&Le5/As5WS4Ws5WS4Ws5WS4Ws5WS4Ws5?-Lx<IENDB`parlatype-1.5.4/data/icons/24x24/0000755000175000017500000000000013204324053013326 500000000000000parlatype-1.5.4/data/icons/24x24/apps/0000755000175000017500000000000013204324053014271 500000000000000parlatype-1.5.4/data/icons/24x24/apps/com.github.gkarsay.parlatype.png0000644000175000017500000000216713176574164022446 00000000000000PNG  IHDRw=sBIT|d pHYs B(xtEXtSoftwarewww.inkscape.org<IDATHkUsfvI&# 6JKEҦPUAAE/ UB#i שJ4æ*-V1MӤݙ9/v;%55f8=wޙ3pq7 ;܌MΊO'&& ۷nЁ'oE)RlBs)I`&i{$\<<ŋa=mOl dvv<W &$MS%nZk-?$I;F~26f\?uC\2azkR2PXk+Bs]/֢K4u&B ׮U"C8G0Fcm kSDQR )%AG9qغi{݃!icc5%ev0EPs~|)o3z>8o.j(Ƙ 2֚0 R"d/ٺe3CWOH7a|62JgjT!ӿʎZ9UJaa~;{cH?qkOԍT%ۀ5==r9fgv d +b vq#G~$3TM>֚5=H!QRF! IS1H)R݃7LOy-RLM`8~H)1Ɛʀ,!AC]=6EQJё 8zl PD R,u+h v @>A8粃{NU)%2qsTX(<6lXO3OV& /{}kuD!(cM$NOOGo~*+DVsϷ}O\;EئeJ&܆8@OZsFq[IG1j Rhh4zz7nܔ+JJۆTUΜ9.s?#u@ s U!A` aYs,ܭ(ݭIENDB`parlatype-1.5.4/data/icons/Makefile.am0000644000175000017500000000246613176574164014551 00000000000000icon16dir = $(datadir)/icons/hicolor/16x16/apps icon16_DATA = 16x16/apps/com.github.gkarsay.parlatype.png icon22dir = $(datadir)/icons/hicolor/22x22/apps icon22_DATA = 22x22/apps/com.github.gkarsay.parlatype.png icon24dir = $(datadir)/icons/hicolor/24x24/apps icon24_DATA = 24x24/apps/com.github.gkarsay.parlatype.png icon32dir = $(datadir)/icons/hicolor/32x32/apps icon32_DATA = 32x32/apps/com.github.gkarsay.parlatype.png icon48dir = $(datadir)/icons/hicolor/48x48/apps icon48_DATA = 48x48/apps/com.github.gkarsay.parlatype.png icon256dir = $(datadir)/icons/hicolor/256x256/apps icon256_DATA = 256x256/apps/com.github.gkarsay.parlatype.png iconscalabledir = $(datadir)/icons/hicolor/scalable/apps iconscalable_DATA = scalable/apps/com.github.gkarsay.parlatype-symbolic.svg gtk_update_icon_cache = gtk-update-icon-cache -f -t $(datadir)/icons/hicolor install-data-hook: update-icon-cache uninstall-hook: update-icon-cache update-icon-cache: @-if test -z "$(DESTDIR)"; then \ echo "Updating Gtk icon cache."; \ $(gtk_update_icon_cache); \ else \ echo "*** Icon cache not updated. After (un)install, run this:"; \ echo "*** $(gtk_update_icon_cache)"; \ fi EXTRA_DIST = \ $(icon16_DATA) \ $(icon22_DATA) \ $(icon24_DATA) \ $(icon32_DATA) \ $(icon48_DATA) \ $(icon256_DATA) \ $(iconscalable_DATA) parlatype-1.5.4/data/com.github.gkarsay.parlatype.appdata.xml.in0000644000175000017500000000232313176574164021631 00000000000000 com.github.gkarsay.parlatype.desktop CC-BY-SA-4.0 GPL-3.0+ <_name>Parlatype <_summary>Media player for manual speech transcription <_p>Parlatype is an easy to use media player. Its main purpose is to help you transcribing speech. https://raw.githubusercontent.com/gkarsay/parlatype/master/data/screenshot.png https://gkarsay.github.io/parlatype/ https://github.com/gkarsay/parlatype/issues Gabor Karsay parlatype parlatype libparlatype libreoffice-writer.desktop AppMenu ModernToolkit UserDocs gabor.karsay@gmx.at parlatype-1.5.4/data/com.github.gkarsay.parlatype.gschema.xml0000644000175000017500000000440713176574164021226 00000000000000 2 Rewind on pause Value in seconds 10 Jump back Value in seconds 10 Jump forward Value in seconds 100 Pixels per second Pixels per second 100 Window's horizontal position Window's horizontal position 100 Window's vertical position Window's vertical position 100 Window's width Window's width 100 Window's height Window's height false Remember window's position Remember window's position false Remember window's size Remember window's size false Start window on top Start window on top true Show ruler Show ruler false Fixed cursor Fixed cursor parlatype-1.5.4/data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in0000644000175000017500000000117613176574164025736 00000000000000 com.github.gkarsay.parlatype.libreoffice-helpers com.github.gkarsay.parlatype.desktop libreoffice-writer.desktop <_name>LibreOffice/Parlatype Helpers <_summary>Control Parlatype using LibreOffice macros https://gkarsay.github.io/parlatype/ https://github.com/gkarsay/parlatype/issues CC-BY-SA-4.0 GPL-3.0+ gabor.karsay@gmx.at parlatype-1.5.4/data/com.github.gkarsay.parlatype.desktop.in0000644000175000017500000000067113176574164021075 00000000000000[Desktop Entry] Version=1.0 _Name=Parlatype _Comment=Transcription utility _Keywords=Transcription; Exec=parlatype %U Icon=com.github.gkarsay.parlatype Terminal=false Type=Application DBusActivatable=true StartupNotify=true Categories=Utility; MimeType=application/x-ogg;application/ogg;audio/x-vorbis+ogg;audio/x-scpls;audio/x-mp3;audio/x-mpeg;audio/mpeg;audio/x-mpegurl;audio/x-flac;audio/mp4;x-scheme-handler/itms;x-scheme-handler/itmss; parlatype-1.5.4/data/Makefile.am0000644000175000017500000000241313176574164013426 00000000000000SUBDIRS = icons desktopdir = $(datadir)/applications desktop_in_files = com.github.gkarsay.parlatype.desktop.in desktop_DATA = $(desktop_in_files:.desktop.in=.desktop) @INTLTOOL_DESKTOP_RULE@ install-desktop-database: install-desktopDATA update-desktop-database $(DESTDIR)$(desktopdir) gsettings_SCHEMAS = com.github.gkarsay.parlatype.gschema.xml @GSETTINGS_RULES@ appdatadir = $(datadir)/metainfo appdata_in_files = com.github.gkarsay.parlatype.appdata.xml.in if LIBREOFFICE appdata_in_files += com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in endif appdata_DATA = $(appdata_in_files:.xml.in=.xml) @INTLTOOL_XML_RULE@ dbusservicedir = $(datadir)/dbus-1/services dbusservice_DATA = com.github.gkarsay.parlatype.service com.github.gkarsay.parlatype.service: Makefile $(AM_V_GEN) (echo '[D-BUS Service]'; \ echo 'Name=com.github.gkarsay.parlatype'; \ echo 'Exec=${bindir}/parlatype --gapplication-service') > $@.tmp && \ mv $@.tmp $@ check-local: $(desktop_DATA) $(appdata_DATA) $(DESKTOP_FILE_VALIDATE) $(desktop_DATA) $(APPDATA_VALIDATE) validate-relax --nonet $(appdata_DATA) CLEANFILES = \ $(appdata_DATA) \ $(dbusservice_DATA) \ $(desktop_DATA) EXTRA_DIST = \ com.github.gkarsay.parlatype.gschema.xml \ $(desktop_in_files) \ $(appdata_in_files) parlatype-1.5.4/compile0000755000175000017500000001624513167645114012041 00000000000000#! /bin/sh # Wrapper for compilers which do not understand '-c -o'. scriptversion=2012-10-14.11; # UTC # Copyright (C) 1999-2013 Free Software Foundation, Inc. # Written by Tom Tromey . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # This file is maintained in Automake, please report # bugs to or send patches to # . nl=' ' # We need space, tab and new line, in precisely that order. Quoting is # there to prevent tools from complaining about whitespace usage. IFS=" "" $nl" file_conv= # func_file_conv build_file lazy # Convert a $build file to $host form and store it in $file # Currently only supports Windows hosts. If the determined conversion # type is listed in (the comma separated) LAZY, no conversion will # take place. func_file_conv () { file=$1 case $file in / | /[!/]*) # absolute file, and not a UNC file if test -z "$file_conv"; then # lazily determine how to convert abs files case `uname -s` in MINGW*) file_conv=mingw ;; CYGWIN*) file_conv=cygwin ;; *) file_conv=wine ;; esac fi case $file_conv/,$2, in *,$file_conv,*) ;; mingw/*) file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` ;; cygwin/*) file=`cygpath -m "$file" || echo "$file"` ;; wine/*) file=`winepath -w "$file" || echo "$file"` ;; esac ;; esac } # func_cl_dashL linkdir # Make cl look for libraries in LINKDIR func_cl_dashL () { func_file_conv "$1" if test -z "$lib_path"; then lib_path=$file else lib_path="$lib_path;$file" fi linker_opts="$linker_opts -LIBPATH:$file" } # func_cl_dashl library # Do a library search-path lookup for cl func_cl_dashl () { lib=$1 found=no save_IFS=$IFS IFS=';' for dir in $lib_path $LIB do IFS=$save_IFS if $shared && test -f "$dir/$lib.dll.lib"; then found=yes lib=$dir/$lib.dll.lib break fi if test -f "$dir/$lib.lib"; then found=yes lib=$dir/$lib.lib break fi if test -f "$dir/lib$lib.a"; then found=yes lib=$dir/lib$lib.a break fi done IFS=$save_IFS if test "$found" != yes; then lib=$lib.lib fi } # func_cl_wrapper cl arg... # Adjust compile command to suit cl func_cl_wrapper () { # Assume a capable shell lib_path= shared=: linker_opts= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as 'compile cc -o foo foo.c'. eat=1 case $2 in *.o | *.[oO][bB][jJ]) func_file_conv "$2" set x "$@" -Fo"$file" shift ;; *) func_file_conv "$2" set x "$@" -Fe"$file" shift ;; esac ;; -I) eat=1 func_file_conv "$2" mingw set x "$@" -I"$file" shift ;; -I*) func_file_conv "${1#-I}" mingw set x "$@" -I"$file" shift ;; -l) eat=1 func_cl_dashl "$2" set x "$@" "$lib" shift ;; -l*) func_cl_dashl "${1#-l}" set x "$@" "$lib" shift ;; -L) eat=1 func_cl_dashL "$2" ;; -L*) func_cl_dashL "${1#-L}" ;; -static) shared=false ;; -Wl,*) arg=${1#-Wl,} save_ifs="$IFS"; IFS=',' for flag in $arg; do IFS="$save_ifs" linker_opts="$linker_opts $flag" done IFS="$save_ifs" ;; -Xlinker) eat=1 linker_opts="$linker_opts $2" ;; -*) set x "$@" "$1" shift ;; *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) func_file_conv "$1" set x "$@" -Tp"$file" shift ;; *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) func_file_conv "$1" mingw set x "$@" "$file" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -n "$linker_opts"; then linker_opts="-link$linker_opts" fi exec "$@" $linker_opts exit 1 } eat= case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: compile [--help] [--version] PROGRAM [ARGS] Wrapper for compilers which do not understand '-c -o'. Remove '-o dest.o' from ARGS, run PROGRAM with the remaining arguments, and rename the output as expected. If you are trying to build a whole package this is not the right script to run: please start by reading the file 'INSTALL'. Report bugs to . EOF exit $? ;; -v | --v*) echo "compile $scriptversion" exit $? ;; cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) func_cl_wrapper "$@" # Doesn't return... ;; esac ofile= cfile= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as 'compile cc -o foo foo.c'. # So we strip '-o arg' only if arg is an object. eat=1 case $2 in *.o | *.obj) ofile=$2 ;; *) set x "$@" -o "$2" shift ;; esac ;; *.c) cfile=$1 set x "$@" "$1" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -z "$ofile" || test -z "$cfile"; then # If no '-o' option was seen then we might have been invoked from a # pattern rule where we don't need one. That is ok -- this is a # normal compilation that the losing compiler can handle. If no # '.c' file was seen then we are probably linking. That is also # ok. exec "$@" fi # Name of file we expect compiler to create. cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` # Create the lock directory. # Note: use '[/\\:.-]' here to ensure that we don't use the same name # that we are using for the .o file. Also, base the name on the expected # object file name, since that is what matters with a parallel build. lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d while true; do if mkdir "$lockdir" >/dev/null 2>&1; then break fi sleep 1 done # FIXME: race condition here if user kills between mkdir and trap. trap "rmdir '$lockdir'; exit 1" 1 2 15 # Run the compile. "$@" ret=$? if test -f "$cofile"; then test "$cofile" = "$ofile" || mv "$cofile" "$ofile" elif test -f "${cofile}bj"; then test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" fi rmdir "$lockdir" exit $ret # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: parlatype-1.5.4/help/0000755000175000017500000000000013204324054011450 500000000000000parlatype-1.5.4/help/en_GB/0000755000175000017500000000000013204324054012422 500000000000000parlatype-1.5.4/help/en_GB/selections.page0000644000175000017500000000221613204122227015347 00000000000000 How to play and repeat a selection Gabor Karsay gabor.karsay@gmx.at Selections

You can select a piece of the waveform with the mouse. Next time you press Play, it will play the selection only. When it is finished and you press Play again, it will loop the selection once.

When in selection mode, you cannot exit the selection anymore until you deselect it.

Selections can be made with the mouse (or pointer device) with a left click, holding the mouse button and dragging the pointer. If you click with Shift key pressed, an already existing selection will be enlarged to that point.

To deselect click once with the left button into the waveform. If the waveform has keyboard focus, you can press Escape.

 parlatype-1.5.4/help/en_GB/en_GB.stamp0000644000175000017500000000000013204122227014346 00000000000000parlatype-1.5.4/help/en_GB/en_GB.po0000644000175000017500000010056513201343612013661 00000000000000# English (United Kingdom) translation for parlatype help # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Anthony Harrington , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-07-20 16:20+0200\n" "PO-Revision-Date: 2017-10-17 18:56+0000\n" "Last-Translator: Andi Chandler \n" "Language-Team: English (United Kingdom) \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-11-10 15:36+0000\n" "X-Generator: Launchpad (build 18498)\n" "Language: \n" #. Put one translator per line, in the form NAME , YEAR1, YEAR2 msgctxt "_" msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Andi Chandler https://launchpad.net/~bing\n" " Anthony Harrington https://launchpad.net/~untaintableangel" #. (itstool) path: info/title #: C/index.page:7 msgctxt "text" msgid "Parlatype" msgstr "Parlatype" #. (itstool) path: info/title #: C/index.page:8 msgctxt "link" msgid "Parlatype" msgstr "Parlatype" #. (itstool) path: credit/name #: C/index.page:10 #: C/drag-and-drop.page:8 #: C/first-steps.page:8 #: C/keyboard-shortcuts.page:8 #: C/media-keys.page:8 #: C/preferences.page:8 #: C/selections.page:8 #: C/timestamps.page:8 #: C/libreoffice-helpers.page:9 msgid "Gabor Karsay" msgstr "Gabor Karsay" #. (itstool) path: info/desc #. (itstool) path: page/p #: C/index.page:14 #: C/index.page:23 msgid "" "Parlatype is an easy to use media player. Its main purpose is to " "help you transcribing speech." msgstr "" "Parlatype is an easy to use media player. Its main purpose is to " "help you when transcribing speech." #. (itstool) path: page/title #: C/index.page:18 msgid "<_:media-1/> Parlatype" msgstr "<_:media-1/> Parlatype" #. (itstool) path: page/p #: C/index.page:24 msgid "" "For a quick overview have a look at . Other " "topics are covered below." msgstr "" "For a quick overview, have a look at . Other " "topics are covered below." #. (itstool) path: section/title #: C/index.page:27 msgid "Help topics" msgstr "Help topics" #. (itstool) path: info/desc #: C/drag-and-drop.page:6 msgid "Drop files, file names or timestamps on Parlatype" msgstr "Drop files, file names or timestamps onto Parlatype" #. (itstool) path: page/title #: C/drag-and-drop.page:14 msgid "Drag and Drop" msgstr "Drag and Drop" #. (itstool) path: page/p #: C/drag-and-drop.page:16 msgid "" "You can drop files, file names or timestamps on Parlatype's " "window." msgstr "" "You can drop files, file names or timestamps on Parlatype's " "window." #. (itstool) path: item/p #: C/drag-and-drop.page:19 msgid "" "Files: Drag and drop a file from a file manager, e.g. Files, on " "Parlatype and it will open that file." msgstr "" "Files: Drag and drop a file from a file manager, e.g. Files, on " "Parlatype and it will open that file." #. (itstool) path: item/p #: C/drag-and-drop.page:20 msgid "" "File names: Select a file name from a word processor, e.g. " "LibreOffice, drop the selected text on Parlatype and " "it will open that file. This will always work if the selection contains a " "full path. If you select the name only, Parlatype will look up " "its full path in the list of recent files and open it if it can find it in " "that list." msgstr "" "File names: Select a file name from a word processor, e.g. " "LibreOffice, drop the selected text on Parlatype and " "it will open that file. This will always work if the selection contains a " "full path. If you select the name only, Parlatype will look up " "its full path in the list of recent files and open it if it can find it in " "that list." #. (itstool) path: item/p #: C/drag-and-drop.page:21 msgid "" "Timestamps: You can drag and drop timestamps in both directions. Select a " "timestamp from a word processor, e.g. LibreOffice, drop the " "selected text on Parlatype and it will jump to that position. Or " "you click on Parlatype's time label and drag it to a word " "processor to insert it there." msgstr "" "Timestamps: You can drag and drop timestamps in both directions. Select a " "timestamp from a word processor, e.g. LibreOffice, drop the " "selected text on Parlatype and it will jump to that position. Or, " "you click on Parlatype's time label and drag it to a word " "processor to insert it there." #. (itstool) path: info/desc #. (itstool) path: page/title #: C/first-steps.page:6 #: C/first-steps.page:14 msgid "First steps with Parlatype" msgstr "First steps with Parlatype" #. (itstool) path: page/p #: C/first-steps.page:16 msgid "" "Parlatype is an easy to use audio player to help you transcribing " "or annotating recorded speech. You need to run a word processor, e.g. " "LibreOffice, too. Launch Parlatype and open an audio " "file by clicking on the Open button in the upper left corner." msgstr "" "Parlatype is an easy to use audio player to help you when " "transcribing or annotating recorded speech. You need to run a word " "processor, e.g. LibreOffice, too. Launch Parlatype and " "open an audio file by clicking on the Open button in the upper " "left corner." #. (itstool) path: note/p #: C/first-steps.page:19 msgid "" "You can also drag and drop a file on Parlatype or open the " "recently used files in the Application menu." msgstr "" "You can also drag and drop a file on Parlatype or open the " "recently used files in the Application menu." #. (itstool) path: page/p #: C/first-steps.page:22 msgid "" "Now in the upper left corner there is a Play button which toggles " "between play and pause. Whenever you pause, Parlatype rewinds a " "few seconds to make it easier to resume. This can be changed in the ." msgstr "" "Now in the upper left corner there is a Play button which toggles " "between play and pause. Whenever you pause, Parlatype rewinds a " "few seconds to make it easier to resume. This can be changed in the ." #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/first-steps.page:24 msgctxt "_" msgid "" "external ref='figures/parlatype-main-window.png' " "md5='1e21a2ddc61fda06238b6b1537191cb3'" msgstr "" "external ref='figures/parlatype-main-window.png' " "md5='1e21a2ddc61fda06238b6b1537191cb3'" #. (itstool) path: page/p #: C/first-steps.page:26 msgid "" "The buttons Jump back and Jump forward in the lower " "left corner skip a few seconds back or ahead. The amount of time can be " "changed in the ." msgstr "" "The buttons Jump back and Jump forward in the lower " "left corner skip a few seconds back or ahead. The amount of time can be " "changed in the ." #. (itstool) path: page/p #: C/first-steps.page:28 msgid "" "The view scrolls automatically so that the cursor is always visible. You can " "scroll manually by clicking on or dragging the scroll bar or using the " "standard keybindings. Automatic scrolling is stopped then." msgstr "" "The view scrolls automatically so that the cursor is always visible. You can " "scroll manually by clicking on or dragging the scroll bar or using the " "standard keybindings. Automatic scrolling is stopped then." #. (itstool) path: page/p #: C/first-steps.page:30 msgid "" "To get back to the cursor's position and let the view scroll automatically " "again, click on the Go to button next to the time label. Clicking " "on the Play button also turns automatic scrolling on." msgstr "" "To get back to the cursor's position and let the view scroll automatically " "again, click on the Go to button next to the time label. Clicking " "on the Play button also turns automatic scrolling on." #. (itstool) path: page/p #: C/first-steps.page:32 msgid "" "Clicking in the view with the right mouse button will put the cursor there, " "also holding the right mouse button pressed and moving it. The left mouse " "button is for ." msgstr "" "Clicking in the view with the right mouse button will put the cursor there, " "also holding the right mouse button pressed and moving it. The left mouse " "button is for ." #. (itstool) path: page/p #: C/first-steps.page:34 msgid "" "The speed scale next to the volume button in the lower " "right corner lets you adjust the speed of playback. A value of 1 means " "normal speed, everything lower (down to 0.5) is slower, everything above is " "faster." msgstr "" "The speed scale next to the volume button in the lower " "right corner lets you adjust the speed of playback. A value of 1 means " "normal speed, everything lower (down to 0.5) is slower, everything greater " "is faster." #. (itstool) path: info/desc #: C/keyboard-shortcuts.page:6 msgid "Standard keyboard shortcuts in Parlatype" msgstr "Standard keyboard shortcuts in Parlatype" #. (itstool) path: page/title #: C/keyboard-shortcuts.page:14 msgid "Keyboard shortcuts" msgstr "Keyboard shortcuts" #. (itstool) path: page/p #: C/keyboard-shortcuts.page:16 msgid "" "Keyboard shortcuts for Parlatype control, like Play, " "are described in . Shortcut keys for the window are " "listed below." msgstr "" "Keyboard shortcuts for Parlatype control, like Play, " "are described in . Shortcut keys for the window are " "listed below." #. (itstool) path: table/title #: C/keyboard-shortcuts.page:19 msgid "Standard Shortcut keys" msgstr "Standard Shortcut keys" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:22 msgid "To Do This" msgstr "To Do This" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:23 msgid "Press This" msgstr "Press This" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:28 msgid "Show help" msgstr "Show help" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:29 msgid "F1" msgstr "F1" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:32 msgid "Open file" msgstr "Open file" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:33 msgid "Ctrlo" msgstr "Ctrlo" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:36 msgid "Open recent files" msgstr "Open recent files" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:37 msgid "Ctrlr" msgstr "Ctrlr" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:40 msgid "Go to …" msgstr "Go to…" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:41 msgid "Ctrlg" msgstr "Ctrlg" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:44 msgid "Copy timestamp" msgstr "Copy timestamp" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:45 msgid "Ctrlc" msgstr "Ctrlc" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:48 msgid "Insert timestamp" msgstr "Insert timestamp" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:49 msgid "Ctrlv" msgstr "Ctrlv" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:52 msgid "Zoom in" msgstr "Zoom in" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:53 msgid "Ctrl+" msgstr "Ctrl+" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:56 msgid "Zoom out" msgstr "Zoom out" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:57 msgid "Ctrl-" msgstr "Ctrl-" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:60 msgid "Quit" msgstr "Quit" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:61 msgid "Ctrlq" msgstr "Ctrlq" #. (itstool) path: p/link #: C/legal.xml:5 msgid "Creative Commons Attribution-ShareAlike 4.0 International" msgstr "Creative Commons Attribution-ShareAlike 4.0 International" #. (itstool) path: license/p #: C/legal.xml:4 msgid "This work is licensed under a <_:link-1/> license." msgstr "This work is licensed under a <_:link-1/> licence." #. (itstool) path: info/desc #: C/media-keys.page:6 msgid "How to control Parlatype with media keys" msgstr "How to control Parlatype with media keys" #. (itstool) path: page/title #: C/media-keys.page:14 msgid "Media keys" msgstr "Media keys" #. (itstool) path: page/p #: C/media-keys.page:16 msgid "" "Parlatype's basic functions can be controlled with so called " "media keys. Media keys are used system wide to control media " "players and they are working even if the media player is not in focus or in " "the background." msgstr "" "Parlatype's basic functions can be controlled with so called " "media keys. Media keys are used system wide to control media " "players and they are working even if the media player is not in focus or in " "the background." #. (itstool) path: page/p #: C/media-keys.page:18 msgid "" "You can change the media keys in GNOME settings. You can use dedicated keys " "from a multimedia keyboard or use any other key or combination of keys." msgstr "" "You can change the media keys in GNOME settings. You can use dedicated keys " "from a multimedia keyboard or use any other key or combination of keys." #. (itstool) path: note/p #: C/media-keys.page:21 msgid "" "This will affect other media players, e.g. Totem or " "Rhythmbox, as well." msgstr "" "This will affect other media players, e.g. Totem or " "Rhythmbox, as well." #. (itstool) path: page/p #: C/media-keys.page:24 msgid "Parlatype listens to these key strokes:" msgstr "Parlatype listens to these key strokes:" #. (itstool) path: item/p #: C/media-keys.page:26 msgid "" "Play, Pause, Stop: Each of these keys " "toggles between playing and pause." msgstr "" "Play, Pause, Stop: Each of these keys " "toggles between playing and pause." #. (itstool) path: item/p #: C/media-keys.page:27 msgid "" "Rewind, Previous: Each of these keys will jump back " "the time you selected in Preferences." msgstr "" "Rewind, Previous: Each of these keys will jump back " "the time you selected in Preferences." #. (itstool) path: item/p #: C/media-keys.page:28 msgid "" "Fast Forward, Next: Each of these keys will jump ahead " "the time you selected in Preferences." msgstr "" "Fast Forward, Next: Each of these keys will jump ahead " "the time you selected in Preferences." #. (itstool) path: note/p #: C/media-keys.page:32 msgid "" "For detailed instructions how to change keyboard shortcuts in GNOME see the " "official " "documentation." msgstr "" "For detailed instructions on how to change keyboard shortcuts in GNOME, see " "the official " "documentation." #. (itstool) path: page/p #: C/media-keys.page:35 msgid "" "If you are using a dedicated foot pedal, it should be possible to map the " "foot pedal signals to any of the keys. This is not well tested, however. Any " "feedback regarding foot pedals is welcome." msgstr "" "If you are using a dedicated foot pedal, it should be possible to map the " "foot pedal signals to any of the keys. This is not well tested, however. Any " "feedback regarding foot pedals is welcome." #. (itstool) path: info/desc #: C/preferences.page:6 msgid "How to customize Parlatype" msgstr "How to customise Parlatype" #. (itstool) path: page/title #: C/preferences.page:14 msgid "Preferences" msgstr "Preferences" #. (itstool) path: page/p #: C/preferences.page:16 msgid "" "You can reach the preferences window in the Application Menu (next to " "Activities in the top left corner. There are three tabs: " "Waveform, Controls and Window." msgstr "" "You can reach the preferences window in the Application Menu (next to " "Activities in the top left corner. There are three tabs: " "Waveform, Controls and Window." #. (itstool) path: section/title #: C/preferences.page:19 msgid "Waveform" msgstr "Waveform" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:21 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-waveform.png' " "md5='e9d05960162dcdddab10378e21ce63da'" msgstr "" "external ref='figures/parlatype-prefs-waveform.png' " "md5='e9d05960162dcdddab10378e21ce63da'" #. (itstool) path: item/p #: C/preferences.page:24 msgid "" "Resolution: The resolution of the waveform image is given in pixels per " "second, e.g. the default resolution of 100 means, that one second is shown " "with a width of 100 pixels." msgstr "" "Resolution: The resolution of the waveform image is given in pixels per " "second, e.g. the default resolution of 100 means that one second is shown " "with a width of 100 pixels." #. (itstool) path: item/p #: C/preferences.page:25 msgid "" "Fixed vs. moving cursor: There are two modes, how to follow the cursor. On " "slower systems a moving cursor might be smoother." msgstr "" "Fixed vs. moving cursor: There are two modes determining how to follow the " "cursor. On slower systems, a moving cursor might be smoother." #. (itstool) path: item/p #: C/preferences.page:26 msgid "Show time scale: Turn the time scale on or off." msgstr "Show time scale: Turn the time scale on or off." #. (itstool) path: section/title #: C/preferences.page:31 msgid "Controls" msgstr "Controls" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:33 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-controls.png' " "md5='0b50614222d881110b176c2e28b7d18c'" msgstr "" "external ref='figures/parlatype-prefs-controls.png' " "md5='0b50614222d881110b176c2e28b7d18c'" #. (itstool) path: item/p #: C/preferences.page:36 msgid "" "Jump back on pause: Parlatype will rewind a few seconds on each " "pause, this way you can easier resume typing. Set this value to 0 if you " "don't want this behaviour." msgstr "" "Jump back on pause: Parlatype will rewind a few seconds on each " "pause, this way you can easier resume typing. Set this value to 0 if you " "don't want this behaviour." #. (itstool) path: item/p #: C/preferences.page:37 msgid "" "Jump back: Configures how many seconds to skip when the Jump back " "button is pressed." msgstr "" "Jump back: Configures how many seconds to skip when the Jump back " "button is pressed." #. (itstool) path: item/p #: C/preferences.page:38 msgid "" "Jump forward: Configures how many seconds to skip when the Jump " "forward button is pressed." msgstr "" "Jump forward: Configures how many seconds to skip when the Jump " "forward button is pressed." #. (itstool) path: section/title #: C/preferences.page:43 msgid "Window" msgstr "Window" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:45 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-window.png' " "md5='6affc475c74223fa48e7de25393fe7de'" msgstr "" "external ref='figures/parlatype-prefs-window.png' " "md5='6affc475c74223fa48e7de25393fe7de'" #. (itstool) path: item/p #: C/preferences.page:48 msgid "" "Remember size: On start-up Parlatype sets the window size to the " "size it had the last time." msgstr "" "Remember size: On start-up Parlatype sets the window size to the " "size it had the last time." #. (itstool) path: item/p #: C/preferences.page:49 msgid "" "Remember position: On start-up Parlatype can position its window " "where you had it when you closed Parlatype last time." msgstr "" "Remember position: On start-up Parlatype can position its window " "where you had it when you closed Parlatype last time." #. (itstool) path: item/p #: C/preferences.page:50 msgid "" "Start on top: This will put Parlatype on start-up on top of other " "windows. This might be useful if you are working with a maximized word " "processor and still want to see the Parlatype window." msgstr "" "Start on top: This will put Parlatype on start-up on top of other " "windows. This might be useful if you are working with a maximized word " "processor and still want to see the Parlatype window." #. (itstool) path: note/p #: C/preferences.page:54 msgid "" "Remember position and Start on top are not available " "on Wayland." msgstr "" "Remember position and Start on top are not available " "on Wayland." #. (itstool) path: info/desc #: C/selections.page:6 msgid "How to play and repeat a selection" msgstr "How to play and repeat a selection" #. (itstool) path: page/title #: C/selections.page:14 msgid "Selections" msgstr "Selections" #. (itstool) path: page/p #: C/selections.page:16 msgid "" "You can select a piece of the waveform with the mouse. Next time you press " "Play, it will play the selection only. When it is finished and " "you press Play again, it will loop the selection once." msgstr "" "You can select a piece of the waveform with the mouse. Next time you press " "Play, it will play the selection only. When it is finished and " "you press Play again, it will loop the selection once." #. (itstool) path: note/p #: C/selections.page:18 msgid "" "When in selection mode, you can not exit the selection anymore until you " "deselect it." msgstr "" "When in selection mode, you cannot exit the selection anymore until you " "deselect it." #. (itstool) path: page/p #: C/selections.page:20 msgid "" "Selections can be made with the mouse (or pointer device) with a left click, " "holding the mouse button and dragging the pointer. If you click with " "Shift key pressed, an already existing selection will be enlarged " "to that point." msgstr "" "Selections can be made with the mouse (or pointer device) with a left click, " "holding the mouse button and dragging the pointer. If you click with " "Shift key pressed, an already existing selection will be enlarged " "to that point." #. (itstool) path: page/p #: C/selections.page:22 msgid "" "To deselect click once with the left button into the waveform. If the " "waveform has keyboard focus, you can press Escape." msgstr "" "To deselect click once with the left button into the waveform. If the " "waveform has keyboard focus, you can press Escape." #. (itstool) path: info/desc #: C/timestamps.page:6 msgid "Set and go to timestamps" msgstr "Set and go to timestamps" #. (itstool) path: page/title #: C/timestamps.page:14 msgid "Timestamps" msgstr "Timestamps" #. (itstool) path: page/p #: C/timestamps.page:16 msgid "Timestamps help you to navigate in your transcription." msgstr "Timestamps help you to navigate around your transcription." #. (itstool) path: note/p #: C/timestamps.page:19 msgid "" "Timestamps look like this: #03:45.2#. You can select them with or without " "the number signs." msgstr "" "Timestamps look like this: #03:45.2#. You can select them with or without " "the number signs." #. (itstool) path: section/title #: C/timestamps.page:23 msgid "Drag and drop" msgstr "Drag and drop" #. (itstool) path: section/p #: C/timestamps.page:25 msgid "" "If you select the timestamp in the word processor, you can drag and drop it " "on the Parlatype window and it will go to that position. This is " "also possible the other way round: Drag the time label from " "Parlatype to a word processor and drop it there to insert it." msgstr "" "If you select the timestamp in the word processor, you can drag and drop it " "on the Parlatype window and it will go to that position. This is " "also possible the other way round: Drag the time label from " "Parlatype to a word processor and drop it there to insert it." #. (itstool) path: section/title #: C/timestamps.page:29 msgid "Using the clipboard" msgstr "Using the clipboard" #. (itstool) path: section/p #: C/timestamps.page:31 msgid "" "First make sure, the Parlatype window has focus. With the key " "sequence Ctrlc the current timestamp " "is copied to the clipboard. Changing to the word processor you can insert " "now the timestamp in your transcription." msgstr "" "Firstly, make sure the Parlatype window has focus. With the key " "sequence Ctrlc, the current timestamp " "is copied to the clipboard. Changing to the word processor, you can now " "insert the timestamp into your transcription." #. (itstool) path: section/p #: C/timestamps.page:32 msgid "" "To go to a timestamp position, copy the timestamp in the word processor to " "the clipboard. Once you have changed focus to Parlatype press " "Ctrlv." msgstr "" "To go to a timestamp position, copy the timestamp in the word processor to " "the clipboard. Once you have changed focus to Parlatype, press " "Ctrlv." #. (itstool) path: info/desc #: C/libreoffice-helpers.page:7 msgid "Use Parlatype with LibreOffice" msgstr "Use Parlatype with LibreOffice" #. (itstool) path: page/title #. (itstool) path: table/title #: C/libreoffice-helpers.page:15 #: C/libreoffice-helpers.page:30 msgid "LibreOffice Helpers" msgstr "LibreOffice Helpers" #. (itstool) path: page/p #: C/libreoffice-helpers.page:17 msgid "" "LibreOffice Helpers let you control Parlatype from " "LibreOffice. For example, you can jump easily to timestamps." msgstr "" "LibreOffice Helpers let you control Parlatype from " "LibreOffice. For example, you can jump easily to timestamps." #. (itstool) path: page/p #: C/libreoffice-helpers.page:19 msgid "" "To use them, you have to assign keyboard shortcuts in LibreOffice " "itself. To do this, open LibreOffice, go to menu Tools " "and select Customize." msgstr "" "To use them, you have to assign keyboard shortcuts in LibreOffice " "itself. To do this, open LibreOffice, go to menu Tools " "and select Customise." #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/libreoffice-helpers.page:21 msgctxt "_" msgid "" "external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" msgstr "" "external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" #. (itstool) path: page/p #: C/libreoffice-helpers.page:23 msgid "" "Go to tab Keyboard. In the lower part, Functions, " "there is a list called Category. At the end of that list you'll " "find the entry LibreOffice Macros. There is a subcategory " "share which has a subcategory Parlatype. After " "selecting Parlatype there will be a list of functions in the " "Functions list. Choose the function you'd like to use, select " "from the list Shortcut keys above a shortcut and click on the " "button Modify." msgstr "" "Go to tab Keyboard. In the lower part, Functions, " "there is a list called Category. At the end of that list you'll " "find the entry LibreOffice Macros. There is a subcategory " "share which has a subcategory Parlatype. After " "selecting Parlatype there will be a list of functions in the " "Functions list. Choose the function you'd like to use, select " "from the list Shortcut keys above a shortcut and click on the " "button Modify." #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/libreoffice-helpers.page:25 msgctxt "_" msgid "" "external ref='figures/lo-customize.png' " "md5='081564921275129bee7bbd10220547e7'" msgstr "" "external ref='figures/lo-customize.png' " "md5='081564921275129bee7bbd10220547e7'" #. (itstool) path: page/p #: C/libreoffice-helpers.page:27 msgid "You can select any of these functions:" msgstr "You can select any of these functions:" #. (itstool) path: td/p #: C/libreoffice-helpers.page:33 msgid "Helper's name" msgstr "Helper's name" #. (itstool) path: td/p #: C/libreoffice-helpers.page:34 msgid "What it does" msgstr "What it does" #. (itstool) path: td/p #: C/libreoffice-helpers.page:40 msgid "" "Toggles between play and pause. Depending on your preferences set in " "Parlatype it will rewind a few seconds on pause." msgstr "" "Toggles between play and pause. Depending on your preferences set in " "Parlatype, it will rewind a few seconds on pause." #. (itstool) path: td/p #: C/libreoffice-helpers.page:44 msgid "" "Jumps back a few seconds, depending on the preferences you set in " "Parlatype." msgstr "" "Jumps back a few seconds, depending on the preferences you set in " "Parlatype." #. (itstool) path: td/p #: C/libreoffice-helpers.page:48 msgid "" "Jumps forward a few seconds, depending on the preferences you set in " "Parlatype." msgstr "" "Jumps forward a few seconds, depending on the preferences you set in " "Parlatype." #. (itstool) path: td/p #: C/libreoffice-helpers.page:52 msgid "" "Inserts the current timestamp at the cursor's position. It does not " "overwrite any selection." msgstr "" "Inserts the current timestamp at the cursor's position. It does not " "overwrite any selection." #. (itstool) path: td/p #: C/libreoffice-helpers.page:56 msgid "The same as above, but on a new line." msgstr "The same as above, but on a new line." #. (itstool) path: td/p #: C/libreoffice-helpers.page:60 msgid "" "If the cursor is set on a timestamp, it will jump to that position. The " "cursor has to be somewhere between the two number signs (#). Don't select " "the timestamp, just put the cursor inside." msgstr "" "If the cursor is set on a timestamp, it will jump to that position. The " "cursor has to be somewhere between the two number signs (#). Don't select " "the timestamp, just put the cursor inside." #. (itstool) path: td/p #: C/libreoffice-helpers.page:64 msgid "Increases playback speed." msgstr "Increases playback speed." #. (itstool) path: td/p #: C/libreoffice-helpers.page:68 msgid "Decreases playback speed." msgstr "Decreases playback speed." parlatype-1.5.4/help/en_GB/first-steps.page0000644000175000017500000000440513204122226015463 00000000000000 First steps with Parlatype Gabor Karsay gabor.karsay@gmx.at First steps with Parlatype

Parlatype is an easy to use audio player to help you when transcribing or annotating recorded speech. You need to run a word processor, e.g. LibreOffice, too. Launch Parlatype and open an audio file by clicking on the Open button in the upper left corner.

You can also drag and drop a file on Parlatype or open the recently used files in the Application menu.

Now in the upper left corner there is a Play button which toggles between play and pause. Whenever you pause, Parlatype rewinds a few seconds to make it easier to resume. This can be changed in the .

The buttons Jump back and Jump forward in the lower left corner skip a few seconds back or ahead. The amount of time can be changed in the .

The view scrolls automatically so that the cursor is always visible. You can scroll manually by clicking on or dragging the scroll bar or using the standard keybindings. Automatic scrolling is stopped then.

To get back to the cursor's position and let the view scroll automatically again, click on the Go to button next to the time label. Clicking on the Play button also turns automatic scrolling on.

Clicking in the view with the right mouse button will put the cursor there, also holding the right mouse button pressed and moving it. The left mouse button is for .

The speed scale next to the volume button in the lower right corner lets you adjust the speed of playback. A value of 1 means normal speed, everything lower (down to 0.5) is slower, everything greater is faster.

 parlatype-1.5.4/help/en_GB/keyboard-shortcuts.page0000644000175000017500000000405113204122226017031 00000000000000 Standard keyboard shortcuts in Parlatype Gabor Karsay gabor.karsay@gmx.at Keyboard shortcuts

Keyboard shortcuts for Parlatype control, like Play, are described in . Shortcut keys for the window are listed below.

Standard Shortcut keys

To Do This

Press This

Show help

F1

Open file

Ctrlo

Open recent files

Ctrlr

Go to…

Ctrlg

Copy timestamp

Ctrlc

Insert timestamp

Ctrlv

Zoom in

Ctrl+

Zoom out

Ctrl-

Quit

Ctrlq
parlatype-1.5.4/help/en_GB/libreoffice-helpers.page0000644000175000017500000000645313204122227017117 00000000000000 Use Parlatype with LibreOffice Gabor Karsay gabor.karsay@gmx.at LibreOffice Helpers

LibreOffice Helpers let you control Parlatype from LibreOffice. For example, you can jump easily to timestamps.

To use them, you have to assign keyboard shortcuts in LibreOffice itself. To do this, open LibreOffice, go to menu Tools and select Customise.

Go to tab Keyboard. In the lower part, Functions, there is a list called Category. At the end of that list you'll find the entry LibreOffice Macros. There is a subcategory share which has a subcategory Parlatype. After selecting Parlatype there will be a list of functions in the Functions list. Choose the function you'd like to use, select from the list Shortcut keys above a shortcut and click on the button Modify.

You can select any of these functions:

LibreOffice Helpers

Helper's name

What it does

PlayPause

Toggles between play and pause. Depending on your preferences set in Parlatype, it will rewind a few seconds on pause.

JumpBack

Jumps back a few seconds, depending on the preferences you set in Parlatype.

JumpForward

Jumps forward a few seconds, depending on the preferences you set in Parlatype.

InsertTimestamp

Inserts the current timestamp at the cursor's position. It does not overwrite any selection.

InsertTimestampOnNewLine

The same as above, but on a new line.

GotoTimestamp

If the cursor is set on a timestamp, it will jump to that position. The cursor has to be somewhere between the two number signs (#). Don't select the timestamp, just put the cursor inside.

IncreaseSpeed

Increases playback speed.

DecreaseSpeed

Decreases playback speed.
parlatype-1.5.4/help/en_GB/preferences.page0000644000175000017500000000477313204122226015511 00000000000000 How to customise Parlatype Gabor Karsay gabor.karsay@gmx.at Preferences

You can reach the preferences window in the Application Menu (next to Activities in the top left corner. There are three tabs: Waveform, Controls and Window.

Waveform

Resolution: The resolution of the waveform image is given in pixels per second, e.g. the default resolution of 100 means that one second is shown with a width of 100 pixels.

Fixed vs. moving cursor: There are two modes determining how to follow the cursor. On slower systems, a moving cursor might be smoother.

Show time scale: Turn the time scale on or off.
Controls

Jump back on pause: Parlatype will rewind a few seconds on each pause, this way you can easier resume typing. Set this value to 0 if you don't want this behaviour.

Jump back: Configures how many seconds to skip when the Jump back button is pressed.

Jump forward: Configures how many seconds to skip when the Jump forward button is pressed.
Window

Remember size: On start-up Parlatype sets the window size to the size it had the last time.

Remember position: On start-up Parlatype can position its window where you had it when you closed Parlatype last time.

Start on top: This will put Parlatype on start-up on top of other windows. This might be useful if you are working with a maximized word processor and still want to see the Parlatype window.

Remember position and Start on top are not available on Wayland.
parlatype-1.5.4/help/en_GB/index.page0000644000175000017500000000174613204122226014314 00000000000000 Parlatype Parlatype Gabor Karsay gabor.karsay@gmx.at Parlatype is an easy to use media player. Its main purpose is to help you when transcribing speech. <media type="image" mime="image/png" src="figures/parlatype-icon.png" its:translate="no"/> Parlatype

Parlatype is an easy to use media player. Its main purpose is to help you when transcribing speech.

For a quick overview, have a look at . Other topics are covered below.

Help topics
parlatype-1.5.4/help/en_GB/drag-and-drop.page0000644000175000017500000000265213204122226015621 00000000000000 Drop files, file names or timestamps onto Parlatype Gabor Karsay gabor.karsay@gmx.at Drag and Drop

You can drop files, file names or timestamps on Parlatype's window.

Files: Drag and drop a file from a file manager, e.g. Files, on Parlatype and it will open that file.

File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that file. This will always work if the selection contains a full path. If you select the name only, Parlatype will look up its full path in the list of recent files and open it if it can find it in that list.

Timestamps: You can drag and drop timestamps in both directions. Select a timestamp from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will jump to that position. Or, you click on Parlatype's time label and drag it to a word processor to insert it there.

 parlatype-1.5.4/help/en_GB/media-keys.page0000644000175000017500000000343613204122226015233 00000000000000 How to control Parlatype with media keys Gabor Karsay gabor.karsay@gmx.at Media keys

Parlatype's basic functions can be controlled with so called media keys. Media keys are used system wide to control media players and they are working even if the media player is not in focus or in the background.

You can change the media keys in GNOME settings. You can use dedicated keys from a multimedia keyboard or use any other key or combination of keys.

This will affect other media players, e.g. Totem or Rhythmbox, as well.

Parlatype listens to these key strokes:

Play, Pause, Stop: Each of these keys toggles between playing and pause.

Rewind, Previous: Each of these keys will jump back the time you selected in Preferences.

Fast Forward, Next: Each of these keys will jump ahead the time you selected in Preferences.

For detailed instructions on how to change keyboard shortcuts in GNOME, see the official documentation.

If you are using a dedicated foot pedal, it should be possible to map the foot pedal signals to any of the keys. This is not well tested, however. Any feedback regarding foot pedals is welcome.

 parlatype-1.5.4/help/en_GB/timestamps.page0000644000175000017500000000301613204122227015364 00000000000000 Set and go to timestamps Gabor Karsay gabor.karsay@gmx.at Timestamps

Timestamps help you to navigate around your transcription.

Timestamps look like this: #03:45.2#. You can select them with or without the number signs.
Drag and drop

If you select the timestamp in the word processor, you can drag and drop it on the Parlatype window and it will go to that position. This is also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it.

Using the clipboard

Firstly, make sure the Parlatype window has focus. With the key sequence Ctrlc, the current timestamp is copied to the clipboard. Changing to the word processor, you can now insert the timestamp into your transcription.

To go to a timestamp position, copy the timestamp in the word processor to the clipboard. Once you have changed focus to Parlatype, press Ctrlv.

 parlatype-1.5.4/help/en_GB/legal.xml0000644000175000017500000000051013204122226014141 00000000000000

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International licence.

 parlatype-1.5.4/help/es/0000755000175000017500000000000013204324054012057 500000000000000parlatype-1.5.4/help/es/selections.page0000644000175000017500000000222413204122227015003 00000000000000 Cómo reproducir y repetir una selección Gabor Karsay gabor.karsay@gmx.at Selecciones

You can select a piece of the waveform with the mouse. Next time you press Play, it will play the selection only. When it is finished and you press Play again, it will loop the selection once.

When in selection mode, you can not exit the selection anymore until you deselect it.

Selections can be made with the mouse (or pointer device) with a left click, holding the mouse button and dragging the pointer. If you click with Shift key pressed, an already existing selection will be enlarged to that point.

To deselect click once with the left button into the waveform. If the waveform has keyboard focus, you can press Escape.

 parlatype-1.5.4/help/es/first-steps.page0000644000175000017500000000466413204122227015130 00000000000000 Primeros pasos con Parlatype Gabor Karsay gabor.karsay@gmx.at Primeros pasos con Parlatype

Parlatype es un reproductor de audio sencillo de usar que puede ayudarle a transcribir o añadir anotaciones a grabaciones de discursos. Necesitará asimismo ejecutar un procesador de textos, p. ej., LibreOffice. Inicie Parlatype y abra un archivo de audio mediante el botón Abrir que se sitúa en la esquina superior izquierda.

Además, puede arrastrar y soltar archivos en Parlatype o abrir archivos recientes mediante el menú de la aplicación.

Ahora encontrará en la esquina superior izquierda el botón Reproducir, que intercambia entre las acciones de reproducir y pausar. Siempre que utilice la función de pausar, Parlatype retrocede unos segundos para facilitarle reanudar. Este comportamiento se puede modificar en las .

The buttons Jump back and Jump forward in the lower left corner skip a few seconds back or ahead. The amount of time can be changed in the .

The view scrolls automatically so that the cursor is always visible. You can scroll manually by clicking on or dragging the scroll bar or using the standard keybindings. Automatic scrolling is stopped then.

To get back to the cursor's position and let the view scroll automatically again, click on the Go to button next to the time label. Clicking on the Play button also turns automatic scrolling on.

Clicking in the view with the right mouse button will put the cursor there, also holding the right mouse button pressed and moving it. The left mouse button is for .

The speed scale next to the volume button in the lower right corner lets you adjust the speed of playback. A value of 1 means normal speed, everything lower (down to 0.5) is slower, everything above is faster.

 parlatype-1.5.4/help/es/es.stamp0000644000175000017500000000000013204122227013440 00000000000000parlatype-1.5.4/help/es/es.po0000644000175000017500000007013013201343612012745 00000000000000# Spanish translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # FIRST AUTHOR , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2017-07-20 16:20+0200\n" "PO-Revision-Date: 2017-08-11 00:23+0000\n" "Last-Translator: Adolfo Jayme \n" "Language-Team: Spanish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-11-10 15:36+0000\n" "X-Generator: Launchpad (build 18498)\n" #. Put one translator per line, in the form NAME , YEAR1, YEAR2 msgctxt "_" msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Adolfo Jayme https://launchpad.net/~fitojb" #. (itstool) path: info/title #: C/index.page:7 msgctxt "text" msgid "Parlatype" msgstr "Parlatype" #. (itstool) path: info/title #: C/index.page:8 msgctxt "link" msgid "Parlatype" msgstr "Parlatype" #. (itstool) path: credit/name #: C/index.page:10 #: C/drag-and-drop.page:8 #: C/first-steps.page:8 #: C/keyboard-shortcuts.page:8 #: C/media-keys.page:8 #: C/preferences.page:8 #: C/selections.page:8 #: C/timestamps.page:8 #: C/libreoffice-helpers.page:9 msgid "Gabor Karsay" msgstr "Gabor Karsay" #. (itstool) path: info/desc #. (itstool) path: page/p #: C/index.page:14 #: C/index.page:23 msgid "" "Parlatype is an easy to use media player. Its main purpose is to " "help you transcribing speech." msgstr "" "Parlatype es un reproductor multimedia sencillo de utilizar. Su " "propósito principal es ayudarle a transcribir el lenguaje hablado." #. (itstool) path: page/title #: C/index.page:18 msgid "<_:media-1/> Parlatype" msgstr "<_:media-1/> Parlatype" #. (itstool) path: page/p #: C/index.page:24 msgid "" "For a quick overview have a look at . Other " "topics are covered below." msgstr "" "Para obtener un panorama general breve, consulte . A continuación se tratan otros temas." #. (itstool) path: section/title #: C/index.page:27 msgid "Help topics" msgstr "Temas de ayuda" #. (itstool) path: info/desc #: C/drag-and-drop.page:6 msgid "Drop files, file names or timestamps on Parlatype" msgstr "" "Arrastre archivos, nombres de archivo o marcas cronológicas en Parlatype" #. (itstool) path: page/title #: C/drag-and-drop.page:14 msgid "Drag and Drop" msgstr "Arrastrar y soltar" #. (itstool) path: page/p #: C/drag-and-drop.page:16 msgid "" "You can drop files, file names or timestamps on Parlatype's " "window." msgstr "" "Puede soltar archivos, nombres de archivos o marcas cronológicas en la " "ventana de Parlatype." #. (itstool) path: item/p #: C/drag-and-drop.page:19 msgid "" "Files: Drag and drop a file from a file manager, e.g. Files, on " "Parlatype and it will open that file." msgstr "" "Archivos: arrastre y suelte un archivo desde un gestor de archivos, p. ej., " "Nautilus, en Parlatype, y este abrirá el archivo." #. (itstool) path: item/p #: C/drag-and-drop.page:20 msgid "" "File names: Select a file name from a word processor, e.g. " "LibreOffice, drop the selected text on Parlatype and " "it will open that file. This will always work if the selection contains a " "full path. If you select the name only, Parlatype will look up " "its full path in the list of recent files and open it if it can find it in " "that list." msgstr "" "Nombres de archivo: seleccione un nombre de archivo en un procesador de " "textos, p. ej., LibreOffice, suelte el texto seleccionado en " "Parlatype y se abrirá el archivo referido. Esto funcionará " "siempre si la selección contiene una ruta de acceso completa. Si selecciona " "solo el nombre, Parlatype localizará su ruta completa en la lista " "de archivos recientes y, si es capaz de encontrarlo, lo abrirá." #. (itstool) path: item/p #: C/drag-and-drop.page:21 msgid "" "Timestamps: You can drag and drop timestamps in both directions. Select a " "timestamp from a word processor, e.g. LibreOffice, drop the " "selected text on Parlatype and it will jump to that position. Or " "you click on Parlatype's time label and drag it to a word " "processor to insert it there." msgstr "" "Marcas cronológicas: es posible arrastrar y soltar marcas cronológicas en " "ambas direcciones. Seleccione una marca cronológica desde un procesador de " "textos, p. ej., LibreOffice, y cuando suelte el texto " "seleccionado en Parlatype, este saltará a la posición referida. O " "bien, puede pulsar en el indicador de tiempo de Parlatype y " "arrastrarlo hasta un procesador de textos para insertar una marca temporal." #. (itstool) path: info/desc #. (itstool) path: page/title #: C/first-steps.page:6 #: C/first-steps.page:14 msgid "First steps with Parlatype" msgstr "Primeros pasos con Parlatype" #. (itstool) path: page/p #: C/first-steps.page:16 msgid "" "Parlatype is an easy to use audio player to help you transcribing " "or annotating recorded speech. You need to run a word processor, e.g. " "LibreOffice, too. Launch Parlatype and open an audio " "file by clicking on the Open button in the upper left corner." msgstr "" "Parlatype es un reproductor de audio sencillo de usar que puede " "ayudarle a transcribir o añadir anotaciones a grabaciones de discursos. " "Necesitará asimismo ejecutar un procesador de textos, p. ej., " "LibreOffice. Inicie Parlatype y abra un archivo de " "audio mediante el botón Abrir que se sitúa en la esquina superior " "izquierda." #. (itstool) path: note/p #: C/first-steps.page:19 msgid "" "You can also drag and drop a file on Parlatype or open the " "recently used files in the Application menu." msgstr "" "Además, puede arrastrar y soltar archivos en Parlatype o abrir " "archivos recientes mediante el menú de la aplicación." #. (itstool) path: page/p #: C/first-steps.page:22 msgid "" "Now in the upper left corner there is a Play button which toggles " "between play and pause. Whenever you pause, Parlatype rewinds a " "few seconds to make it easier to resume. This can be changed in the ." msgstr "" "Ahora encontrará en la esquina superior izquierda el botón " "Reproducir, que intercambia entre las acciones de reproducir y " "pausar. Siempre que utilice la función de pausar, Parlatype " "retrocede unos segundos para facilitarle reanudar. Este comportamiento se " "puede modificar en las ." #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/first-steps.page:24 msgctxt "_" msgid "" "external ref='figures/parlatype-main-window.png' " "md5='1e21a2ddc61fda06238b6b1537191cb3'" msgstr "" "external ref='figures/parlatype-main-window.png' " "md5='1e21a2ddc61fda06238b6b1537191cb3'" #. (itstool) path: page/p #: C/first-steps.page:26 msgid "" "The buttons Jump back and Jump forward in the lower " "left corner skip a few seconds back or ahead. The amount of time can be " "changed in the ." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:28 msgid "" "The view scrolls automatically so that the cursor is always visible. You can " "scroll manually by clicking on or dragging the scroll bar or using the " "standard keybindings. Automatic scrolling is stopped then." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:30 msgid "" "To get back to the cursor's position and let the view scroll automatically " "again, click on the Go to button next to the time label. Clicking " "on the Play button also turns automatic scrolling on." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:32 msgid "" "Clicking in the view with the right mouse button will put the cursor there, " "also holding the right mouse button pressed and moving it. The left mouse " "button is for ." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:34 msgid "" "The speed scale next to the volume button in the lower " "right corner lets you adjust the speed of playback. A value of 1 means " "normal speed, everything lower (down to 0.5) is slower, everything above is " "faster." msgstr "" #. (itstool) path: info/desc #: C/keyboard-shortcuts.page:6 msgid "Standard keyboard shortcuts in Parlatype" msgstr "Atajos de teclado estándares de Parlatype" #. (itstool) path: page/title #: C/keyboard-shortcuts.page:14 msgid "Keyboard shortcuts" msgstr "Atajos de teclado" #. (itstool) path: page/p #: C/keyboard-shortcuts.page:16 msgid "" "Keyboard shortcuts for Parlatype control, like Play, " "are described in . Shortcut keys for the window are " "listed below." msgstr "" "Los atajos de teclado de Parlatype, que permiten controlar " "acciones como Reproducir, se describen en . Los atajos de teclado para la ventana se enumeran a " "continuación." #. (itstool) path: table/title #: C/keyboard-shortcuts.page:19 msgid "Standard Shortcut keys" msgstr "Atajos de teclado estándares" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:22 msgid "To Do This" msgstr "Para realizar esto…" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:23 msgid "Press This" msgstr "… Oprima:" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:28 msgid "Show help" msgstr "Mostrar ayuda" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:29 msgid "F1" msgstr "F1" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:32 msgid "Open file" msgstr "Abrir un archivo" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:33 msgid "Ctrlo" msgstr "CtrlO" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:36 msgid "Open recent files" msgstr "Abrir archivos recientes" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:37 msgid "Ctrlr" msgstr "CtrlR" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:40 msgid "Go to …" msgstr "Ir a…" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:41 msgid "Ctrlg" msgstr "CtrlG" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:44 msgid "Copy timestamp" msgstr "Copiar la marca cronológica" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:45 msgid "Ctrlc" msgstr "CtrlC" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:48 msgid "Insert timestamp" msgstr "Insertar una marca cronológica" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:49 msgid "Ctrlv" msgstr "CtrlV" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:52 msgid "Zoom in" msgstr "Ampliar" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:53 msgid "Ctrl+" msgstr "Ctrl+" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:56 msgid "Zoom out" msgstr "Reducir" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:57 msgid "Ctrl-" msgstr "Ctrl-" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:60 msgid "Quit" msgstr "Salir" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:61 msgid "Ctrlq" msgstr "CtrlQ" #. (itstool) path: p/link #: C/legal.xml:5 msgid "Creative Commons Attribution-ShareAlike 4.0 International" msgstr "" #. (itstool) path: license/p #: C/legal.xml:4 msgid "This work is licensed under a <_:link-1/> license." msgstr "Esta obra está disponible bajo la licencia <_:link-1/>." #. (itstool) path: info/desc #: C/media-keys.page:6 msgid "How to control Parlatype with media keys" msgstr "Cómo controlar Parlatype con las teclas multimedia" #. (itstool) path: page/title #: C/media-keys.page:14 msgid "Media keys" msgstr "Teclas multimedia" #. (itstool) path: page/p #: C/media-keys.page:16 msgid "" "Parlatype's basic functions can be controlled with so called " "media keys. Media keys are used system wide to control media " "players and they are working even if the media player is not in focus or in " "the background." msgstr "" "Las funciones básicas de Parlatype pueden controlarse con las " "denominadas teclas multimedia. Las teclas multimedia se emplean en " "todo el sistema para controlar los reproductores de multimedia y funcionan " "incluso si uno de esos reproductores no está enfocado o se halla " "ejecutándose en segundo plano." #. (itstool) path: page/p #: C/media-keys.page:18 msgid "" "You can change the media keys in GNOME settings. You can use dedicated keys " "from a multimedia keyboard or use any other key or combination of keys." msgstr "" "Es posible modificar las teclas multimedia en la configuración de GNOME. " "Puede emplear las teclas especializadas de un teclado multimedia, o bien, " "utilizar cualquier otra tecla o combinación de teclas." #. (itstool) path: note/p #: C/media-keys.page:21 msgid "" "This will affect other media players, e.g. Totem or " "Rhythmbox, as well." msgstr "" "Ello también afectará otros reproductores de multimedia, como " "Totem o Rhythmbox." #. (itstool) path: page/p #: C/media-keys.page:24 msgid "Parlatype listens to these key strokes:" msgstr "Parlatype reacciona a estas teclas:" #. (itstool) path: item/p #: C/media-keys.page:26 msgid "" "Play, Pause, Stop: Each of these keys " "toggles between playing and pause." msgstr "" #. (itstool) path: item/p #: C/media-keys.page:27 msgid "" "Rewind, Previous: Each of these keys will jump back " "the time you selected in Preferences." msgstr "" #. (itstool) path: item/p #: C/media-keys.page:28 msgid "" "Fast Forward, Next: Each of these keys will jump ahead " "the time you selected in Preferences." msgstr "" #. (itstool) path: note/p #: C/media-keys.page:32 msgid "" "For detailed instructions how to change keyboard shortcuts in GNOME see the " "official " "documentation." msgstr "" "Para obtener instrucciones detalladas sobre cómo modificar los atajos de " "teclado de GNOME, consulte la documentación oficial." #. (itstool) path: page/p #: C/media-keys.page:35 msgid "" "If you are using a dedicated foot pedal, it should be possible to map the " "foot pedal signals to any of the keys. This is not well tested, however. Any " "feedback regarding foot pedals is welcome." msgstr "" #. (itstool) path: info/desc #: C/preferences.page:6 msgid "How to customize Parlatype" msgstr "Cómo personalizar Parlatype" #. (itstool) path: page/title #: C/preferences.page:14 msgid "Preferences" msgstr "Preferencias" #. (itstool) path: page/p #: C/preferences.page:16 msgid "" "You can reach the preferences window in the Application Menu (next to " "Activities in the top left corner. There are three tabs: " "Waveform, Controls and Window." msgstr "" #. (itstool) path: section/title #: C/preferences.page:19 msgid "Waveform" msgstr "" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:21 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-waveform.png' " "md5='e9d05960162dcdddab10378e21ce63da'" msgstr "" "external ref='figures/parlatype-prefs-waveform.png' " "md5='e9d05960162dcdddab10378e21ce63da'" #. (itstool) path: item/p #: C/preferences.page:24 msgid "" "Resolution: The resolution of the waveform image is given in pixels per " "second, e.g. the default resolution of 100 means, that one second is shown " "with a width of 100 pixels." msgstr "" #. (itstool) path: item/p #: C/preferences.page:25 msgid "" "Fixed vs. moving cursor: There are two modes, how to follow the cursor. On " "slower systems a moving cursor might be smoother." msgstr "" #. (itstool) path: item/p #: C/preferences.page:26 msgid "Show time scale: Turn the time scale on or off." msgstr "" #. (itstool) path: section/title #: C/preferences.page:31 msgid "Controls" msgstr "Controles" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:33 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-controls.png' " "md5='0b50614222d881110b176c2e28b7d18c'" msgstr "" "external ref='figures/parlatype-prefs-controls.png' " "md5='0b50614222d881110b176c2e28b7d18c'" #. (itstool) path: item/p #: C/preferences.page:36 msgid "" "Jump back on pause: Parlatype will rewind a few seconds on each " "pause, this way you can easier resume typing. Set this value to 0 if you " "don't want this behaviour." msgstr "" #. (itstool) path: item/p #: C/preferences.page:37 msgid "" "Jump back: Configures how many seconds to skip when the Jump back " "button is pressed." msgstr "" #. (itstool) path: item/p #: C/preferences.page:38 msgid "" "Jump forward: Configures how many seconds to skip when the Jump " "forward button is pressed." msgstr "" #. (itstool) path: section/title #: C/preferences.page:43 msgid "Window" msgstr "Ventana" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:45 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-window.png' " "md5='6affc475c74223fa48e7de25393fe7de'" msgstr "" "external ref='figures/parlatype-prefs-window.png' " "md5='6affc475c74223fa48e7de25393fe7de'" #. (itstool) path: item/p #: C/preferences.page:48 msgid "" "Remember size: On start-up Parlatype sets the window size to the " "size it had the last time." msgstr "" #. (itstool) path: item/p #: C/preferences.page:49 msgid "" "Remember position: On start-up Parlatype can position its window " "where you had it when you closed Parlatype last time." msgstr "" #. (itstool) path: item/p #: C/preferences.page:50 msgid "" "Start on top: This will put Parlatype on start-up on top of other " "windows. This might be useful if you are working with a maximized word " "processor and still want to see the Parlatype window." msgstr "" #. (itstool) path: note/p #: C/preferences.page:54 msgid "" "Remember position and Start on top are not available " "on Wayland." msgstr "" #. (itstool) path: info/desc #: C/selections.page:6 msgid "How to play and repeat a selection" msgstr "Cómo reproducir y repetir una selección" #. (itstool) path: page/title #: C/selections.page:14 msgid "Selections" msgstr "Selecciones" #. (itstool) path: page/p #: C/selections.page:16 msgid "" "You can select a piece of the waveform with the mouse. Next time you press " "Play, it will play the selection only. When it is finished and " "you press Play again, it will loop the selection once." msgstr "" #. (itstool) path: note/p #: C/selections.page:18 msgid "" "When in selection mode, you can not exit the selection anymore until you " "deselect it." msgstr "" #. (itstool) path: page/p #: C/selections.page:20 msgid "" "Selections can be made with the mouse (or pointer device) with a left click, " "holding the mouse button and dragging the pointer. If you click with " "Shift key pressed, an already existing selection will be enlarged " "to that point." msgstr "" #. (itstool) path: page/p #: C/selections.page:22 msgid "" "To deselect click once with the left button into the waveform. If the " "waveform has keyboard focus, you can press Escape." msgstr "" #. (itstool) path: info/desc #: C/timestamps.page:6 msgid "Set and go to timestamps" msgstr "Establecer y desplazarse a marcas cronológicas" #. (itstool) path: page/title #: C/timestamps.page:14 msgid "Timestamps" msgstr "Marcas cronológicas" #. (itstool) path: page/p #: C/timestamps.page:16 msgid "Timestamps help you to navigate in your transcription." msgstr "Las marcas cronológicas le ayudar a navegar por la transcripción." #. (itstool) path: note/p #: C/timestamps.page:19 msgid "" "Timestamps look like this: #03:45.2#. You can select them with or without " "the number signs." msgstr "" "Las marcas cronológicas lucen así: #03:45.2#. Puede seleccionarlas con o sin " "los caracteres de almohadilla." #. (itstool) path: section/title #: C/timestamps.page:23 msgid "Drag and drop" msgstr "Arrastrar y soltar" #. (itstool) path: section/p #: C/timestamps.page:25 msgid "" "If you select the timestamp in the word processor, you can drag and drop it " "on the Parlatype window and it will go to that position. This is " "also possible the other way round: Drag the time label from " "Parlatype to a word processor and drop it there to insert it." msgstr "" #. (itstool) path: section/title #: C/timestamps.page:29 msgid "Using the clipboard" msgstr "Uso del portapapeles" #. (itstool) path: section/p #: C/timestamps.page:31 msgid "" "First make sure, the Parlatype window has focus. With the key " "sequence Ctrlc the current timestamp " "is copied to the clipboard. Changing to the word processor you can insert " "now the timestamp in your transcription." msgstr "" #. (itstool) path: section/p #: C/timestamps.page:32 msgid "" "To go to a timestamp position, copy the timestamp in the word processor to " "the clipboard. Once you have changed focus to Parlatype press " "Ctrlv." msgstr "" #. (itstool) path: info/desc #: C/libreoffice-helpers.page:7 msgid "Use Parlatype with LibreOffice" msgstr "Uso de Parlatype con LibreOffice" #. (itstool) path: page/title #. (itstool) path: table/title #: C/libreoffice-helpers.page:15 #: C/libreoffice-helpers.page:30 msgid "LibreOffice Helpers" msgstr "Auxiliares de LibreOffice" #. (itstool) path: page/p #: C/libreoffice-helpers.page:17 msgid "" "LibreOffice Helpers let you control Parlatype from " "LibreOffice. For example, you can jump easily to timestamps." msgstr "" "Los auxiliares de LibreOffice le permiten controlar Parlatype " "desde LibreOffice. Por ejemplo, puede desplazarse con facilidad " "por las marcas cronológicas." #. (itstool) path: page/p #: C/libreoffice-helpers.page:19 msgid "" "To use them, you have to assign keyboard shortcuts in LibreOffice " "itself. To do this, open LibreOffice, go to menu Tools " "and select Customize." msgstr "" "Para utilizarlos, debe asignarles atajos de teclado en " "LibreOffice. Para hacerlo, abra LibreOffice, diríjase " "al menú Herramientas y seleccione Personalizar." #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/libreoffice-helpers.page:21 msgctxt "_" msgid "" "external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" msgstr "" #. (itstool) path: page/p #: C/libreoffice-helpers.page:23 msgid "" "Go to tab Keyboard. In the lower part, Functions, " "there is a list called Category. At the end of that list you'll " "find the entry LibreOffice Macros. There is a subcategory " "share which has a subcategory Parlatype. After " "selecting Parlatype there will be a list of functions in the " "Functions list. Choose the function you'd like to use, select " "from the list Shortcut keys above a shortcut and click on the " "button Modify." msgstr "" "Desplácese a la pestaña Teclado. En el apartado inferior, " "Funciones, encontrará una lista denominada Categoría. " "Al final de esta lista, eoncontrará la entrada Macros de " "LibreOffice. Allí se encuentra una subcategoría «share» " "que, a su vez, contiene la subcategoría Parlatype. Cuando " "seleccione Parlatype, se desplegará una lista de funciones en la " "lista Funciones. Elija la función que quiera utilizar, seleccione " "un atajo de la lista Atajos de teclado que está encima, y pulse " "en el botón Modificar." #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/libreoffice-helpers.page:25 msgctxt "_" msgid "" "external ref='figures/lo-customize.png' " "md5='081564921275129bee7bbd10220547e7'" msgstr "" #. (itstool) path: page/p #: C/libreoffice-helpers.page:27 msgid "You can select any of these functions:" msgstr "Puede seleccionar cualesquiera de estas funciones:" #. (itstool) path: td/p #: C/libreoffice-helpers.page:33 msgid "Helper's name" msgstr "Nombre del auxiliar" #. (itstool) path: td/p #: C/libreoffice-helpers.page:34 msgid "What it does" msgstr "Para qué sirve" #. (itstool) path: td/p #: C/libreoffice-helpers.page:40 msgid "" "Toggles between play and pause. Depending on your preferences set in " "Parlatype it will rewind a few seconds on pause." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:44 msgid "" "Jumps back a few seconds, depending on the preferences you set in " "Parlatype." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:48 msgid "" "Jumps forward a few seconds, depending on the preferences you set in " "Parlatype." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:52 msgid "" "Inserts the current timestamp at the cursor's position. It does not " "overwrite any selection." msgstr "" "Inserta la marca cronológica actual en la posición del cursor. No se " "sobrescribe la selección, si la hubiese." #. (itstool) path: td/p #: C/libreoffice-helpers.page:56 msgid "The same as above, but on a new line." msgstr "Idéntico a la función anterior, pero en un renglón nuevo." #. (itstool) path: td/p #: C/libreoffice-helpers.page:60 msgid "" "If the cursor is set on a timestamp, it will jump to that position. The " "cursor has to be somewhere between the two number signs (#). Don't select " "the timestamp, just put the cursor inside." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:64 msgid "Increases playback speed." msgstr "Aumenta la velocidad de reproducción." #. (itstool) path: td/p #: C/libreoffice-helpers.page:68 msgid "Decreases playback speed." msgstr "Disminuye la velocidad de reproducción." parlatype-1.5.4/help/es/keyboard-shortcuts.page0000644000175000017500000000423313204122227016471 00000000000000 Atajos de teclado estándares de Parlatype Gabor Karsay gabor.karsay@gmx.at Atajos de teclado

Los atajos de teclado de Parlatype, que permiten controlar acciones como Reproducir, se describen en . Los atajos de teclado para la ventana se enumeran a continuación.

Atajos de teclado estándares

Para realizar esto…

… Oprima:

Mostrar ayuda

F1

Abrir un archivo

CtrlO

Abrir archivos recientes

CtrlR

Ir a…

CtrlG

Copiar la marca cronológica

CtrlC

Insertar una marca cronológica

CtrlV

Ampliar

Ctrl+

Reducir

Ctrl-

Salir

CtrlQ
parlatype-1.5.4/help/es/libreoffice-helpers.page0000644000175000017500000000705513204122227016553 00000000000000 Uso de Parlatype con LibreOffice Gabor Karsay gabor.karsay@gmx.at Auxiliares de LibreOffice

Los auxiliares de LibreOffice le permiten controlar Parlatype desde LibreOffice. Por ejemplo, puede desplazarse con facilidad por las marcas cronológicas.

Para utilizarlos, debe asignarles atajos de teclado en LibreOffice. Para hacerlo, abra LibreOffice, diríjase al menú Herramientas y seleccione Personalizar.

Desplácese a la pestaña Teclado. En el apartado inferior, Funciones, encontrará una lista denominada Categoría. Al final de esta lista, eoncontrará la entrada Macros de LibreOffice. Allí se encuentra una subcategoría «share» que, a su vez, contiene la subcategoría Parlatype. Cuando seleccione Parlatype, se desplegará una lista de funciones en la lista Funciones. Elija la función que quiera utilizar, seleccione un atajo de la lista Atajos de teclado que está encima, y pulse en el botón Modificar.

Puede seleccionar cualesquiera de estas funciones:

Auxiliares de LibreOffice

Nombre del auxiliar

Para qué sirve

PlayPause

Toggles between play and pause. Depending on your preferences set in Parlatype it will rewind a few seconds on pause.

JumpBack

Jumps back a few seconds, depending on the preferences you set in Parlatype.

JumpForward

Jumps forward a few seconds, depending on the preferences you set in Parlatype.

InsertTimestamp

Inserta la marca cronológica actual en la posición del cursor. No se sobrescribe la selección, si la hubiese.

InsertTimestampOnNewLine

Idéntico a la función anterior, pero en un renglón nuevo.

GotoTimestamp

If the cursor is set on a timestamp, it will jump to that position. The cursor has to be somewhere between the two number signs (#). Don't select the timestamp, just put the cursor inside.

IncreaseSpeed

Aumenta la velocidad de reproducción.

DecreaseSpeed

Disminuye la velocidad de reproducción.
parlatype-1.5.4/help/es/preferences.page0000644000175000017500000000476213204122227015145 00000000000000 Cómo personalizar Parlatype Gabor Karsay gabor.karsay@gmx.at Preferencias

You can reach the preferences window in the Application Menu (next to Activities in the top left corner. There are three tabs: Waveform, Controls and Window.

Waveform

Resolution: The resolution of the waveform image is given in pixels per second, e.g. the default resolution of 100 means, that one second is shown with a width of 100 pixels.

Fixed vs. moving cursor: There are two modes, how to follow the cursor. On slower systems a moving cursor might be smoother.

Show time scale: Turn the time scale on or off.
Controles

Jump back on pause: Parlatype will rewind a few seconds on each pause, this way you can easier resume typing. Set this value to 0 if you don't want this behaviour.

Jump back: Configures how many seconds to skip when the Jump back button is pressed.

Jump forward: Configures how many seconds to skip when the Jump forward button is pressed.
Ventana

Remember size: On start-up Parlatype sets the window size to the size it had the last time.

Remember position: On start-up Parlatype can position its window where you had it when you closed Parlatype last time.

Start on top: This will put Parlatype on start-up on top of other windows. This might be useful if you are working with a maximized word processor and still want to see the Parlatype window.

Remember position and Start on top are not available on Wayland.
parlatype-1.5.4/help/es/index.page0000644000175000017500000000207113204122227013742 00000000000000 Parlatype Parlatype Gabor Karsay gabor.karsay@gmx.at Parlatype es un reproductor multimedia sencillo de utilizar. Su propósito principal es ayudarle a transcribir el lenguaje hablado. <media type="image" mime="image/png" src="figures/parlatype-icon.png" its:translate="no"/> Parlatype

Parlatype es un reproductor multimedia sencillo de utilizar. Su propósito principal es ayudarle a transcribir el lenguaje hablado.

Para obtener un panorama general breve, consulte . A continuación se tratan otros temas.

Temas de ayuda
parlatype-1.5.4/help/es/drag-and-drop.page0000644000175000017500000000326613204122227015261 00000000000000 Arrastre archivos, nombres de archivo o marcas cronológicas en Parlatype Gabor Karsay gabor.karsay@gmx.at Arrastrar y soltar

Puede soltar archivos, nombres de archivos o marcas cronológicas en la ventana de Parlatype.

Archivos: arrastre y suelte un archivo desde un gestor de archivos, p. ej., Nautilus, en Parlatype, y este abrirá el archivo.

Nombres de archivo: seleccione un nombre de archivo en un procesador de textos, p. ej., LibreOffice, suelte el texto seleccionado en Parlatype y se abrirá el archivo referido. Esto funcionará siempre si la selección contiene una ruta de acceso completa. Si selecciona solo el nombre, Parlatype localizará su ruta completa en la lista de archivos recientes y, si es capaz de encontrarlo, lo abrirá.

Marcas cronológicas: es posible arrastrar y soltar marcas cronológicas en ambas direcciones. Seleccione una marca cronológica desde un procesador de textos, p. ej., LibreOffice, y cuando suelte el texto seleccionado en Parlatype, este saltará a la posición referida. O bien, puede pulsar en el indicador de tiempo de Parlatype y arrastrarlo hasta un procesador de textos para insertar una marca temporal.

 parlatype-1.5.4/help/es/media-keys.page0000644000175000017500000000373513204122227014673 00000000000000 Cómo controlar Parlatype con las teclas multimedia Gabor Karsay gabor.karsay@gmx.at Teclas multimedia

Las funciones básicas de Parlatype pueden controlarse con las denominadas teclas multimedia. Las teclas multimedia se emplean en todo el sistema para controlar los reproductores de multimedia y funcionan incluso si uno de esos reproductores no está enfocado o se halla ejecutándose en segundo plano.

Es posible modificar las teclas multimedia en la configuración de GNOME. Puede emplear las teclas especializadas de un teclado multimedia, o bien, utilizar cualquier otra tecla o combinación de teclas.

Ello también afectará otros reproductores de multimedia, como Totem o Rhythmbox.

Parlatype reacciona a estas teclas:

Play, Pause, Stop: Each of these keys toggles between playing and pause.

Rewind, Previous: Each of these keys will jump back the time you selected in Preferences.

Fast Forward, Next: Each of these keys will jump ahead the time you selected in Preferences.

Para obtener instrucciones detalladas sobre cómo modificar los atajos de teclado de GNOME, consulte la documentación oficial.

If you are using a dedicated foot pedal, it should be possible to map the foot pedal signals to any of the keys. This is not well tested, however. Any feedback regarding foot pedals is welcome.

 parlatype-1.5.4/help/es/timestamps.page0000644000175000017500000000310613204122227015021 00000000000000 Establecer y desplazarse a marcas cronológicas Gabor Karsay gabor.karsay@gmx.at Marcas cronológicas

Las marcas cronológicas le ayudar a navegar por la transcripción.

Las marcas cronológicas lucen así: #03:45.2#. Puede seleccionarlas con o sin los caracteres de almohadilla.
Arrastrar y soltar

If you select the timestamp in the word processor, you can drag and drop it on the Parlatype window and it will go to that position. This is also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it.

Uso del portapapeles

First make sure, the Parlatype window has focus. With the key sequence Ctrlc the current timestamp is copied to the clipboard. Changing to the word processor you can insert now the timestamp in your transcription.

To go to a timestamp position, copy the timestamp in the word processor to the clipboard. Once you have changed focus to Parlatype press Ctrlv.

 parlatype-1.5.4/help/es/legal.xml0000644000175000017500000000052013204122227013600 00000000000000

Esta obra está disponible bajo la licencia Creative Commons Attribution-ShareAlike 4.0 International.

 parlatype-1.5.4/help/Makefile.in0000644000175000017500000003326613204324006013444 00000000000000# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ @LIBREOFFICE_TRUE@am__append_1 = \ @LIBREOFFICE_TRUE@ figures/lo-customize.png \ @LIBREOFFICE_TRUE@ figures/lo-menu.png @LIBREOFFICE_TRUE@am__append_2 = \ @LIBREOFFICE_TRUE@ libreoffice-helpers.page subdir = help DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ APPDATA_VALIDATE = @APPDATA_VALIDATE@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DESKTOP_FILE_VALIDATE = @DESKTOP_FILE_VALIDATE@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ GTKDOC_CHECK = @GTKDOC_CHECK@ GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ GTKDOC_REBASE = @GTKDOC_REBASE@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ HELP_DIR = @HELP_DIR@ HTML_DIR = @HTML_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ ITSTOOL = @ITSTOOL@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ WARNINGCFLAGS = @WARNINGCFLAGS@ XGETTEXT = @XGETTEXT@ XMLLINT = @XMLLINT@ YELP_LC_DIST = @YELP_LC_DIST@ YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gsettingsschemadir = @gsettingsschemadir@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ intltool__v_merge_options_ = @intltool__v_merge_options_@ intltool__v_merge_options_0 = @intltool__v_merge_options_0@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ HELP_ID = com.github.gkarsay.parlatype HELP_MEDIA = figures/parlatype-icon.png \ figures/parlatype-prefs-controls.png \ figures/parlatype-prefs-waveform.png \ figures/parlatype-prefs-window.png \ figures/parlatype-main-window.png $(am__append_1) HELP_FILES = index.page drag-and-drop.page first-steps.page \ keyboard-shortcuts.page legal.xml media-keys.page \ preferences.page selections.page timestamps.page \ $(am__append_2) HELP_LINGUAS = de en_GB es he id it lt ku pt all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign help/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign help/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ cscopelist-am ctags-am distclean distclean-generic \ distclean-libtool distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am @YELP_HELP_RULES@ # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: parlatype-1.5.4/help/he/0000755000175000017500000000000013204324054012044 500000000000000parlatype-1.5.4/help/he/he.po0000644000175000017500000005101313176574164012741 00000000000000msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "POT-Creation-Date: 2017-01-26 22:49+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: he\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #. Put one translator per line, in the form NAME , YEAR1, YEAR2 msgctxt "_" msgid "translator-credits" msgstr "" #. (itstool) path: info/title #: C/index.page:7 msgctxt "text" msgid "Parlatype" msgstr "" #. (itstool) path: info/title #: C/index.page:8 msgctxt "link" msgid "Parlatype" msgstr "" #. (itstool) path: credit/name #: C/index.page:10 C/drag-and-drop.page:8 C/first-steps.page:8 #: C/keyboard-shortcuts.page:8 C/libreoffice-helpers.page:9 #: C/media-keys.page:8 C/preferences.page:8 C/selections.page:8 #: C/timestamps.page:8 msgid "Gabor Karsay" msgstr "" #. (itstool) path: info/desc #. (itstool) path: page/p #: C/index.page:14 C/index.page:23 msgid "" "Parlatype is an easy to use media player. Its main purpose is to " "help you transcribing speech." msgstr "" #. (itstool) path: page/title #: C/index.page:18 msgid "<_:media-1/> Parlatype" msgstr "" #. (itstool) path: page/p #: C/index.page:24 msgid "" "For a quick overview have a look at . Other " "topics are covered below." msgstr "" #. (itstool) path: section/title #: C/index.page:27 msgid "Help topics" msgstr "" #. (itstool) path: info/desc #: C/drag-and-drop.page:6 msgid "Drop files, file names or timestamps on Parlatype" msgstr "" #. (itstool) path: page/title #: C/drag-and-drop.page:14 msgid "Drag and Drop" msgstr "" #. (itstool) path: page/p #: C/drag-and-drop.page:16 msgid "" "You can drop files, file names or timestamps on Parlatype's " "window." msgstr "" #. (itstool) path: item/p #: C/drag-and-drop.page:19 msgid "" "Files: Drag and drop a file from a file manager, e.g. Files, on " "Parlatype and it will open that file." msgstr "" #. (itstool) path: item/p #: C/drag-and-drop.page:20 msgid "" "File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that " "file. This will always work if the selection contains a full path. If you " "select the name only, Parlatype will look up its full path in the " "list of recent files and open it if it can find it in that list." msgstr "" #. (itstool) path: item/p #: C/drag-and-drop.page:21 msgid "" "Timestamps: You can drag and drop timestamps in both directions. Select a " "timestamp from a word processor, e.g. LibreOffice, drop the " "selected text on Parlatype and it will jump to that position. Or " "you click on Parlatype's time label and drag it to a word " "processor to insert it there." msgstr "" #. (itstool) path: info/desc #. (itstool) path: page/title #: C/first-steps.page:6 C/first-steps.page:14 msgid "First steps with Parlatype" msgstr "" #. (itstool) path: page/p #: C/first-steps.page:16 msgid "" "Parlatype is an easy to use audio player to help you transcribing " "or annotating recorded speech. You need to run a word processor, e.g. " "LibreOffice, too. Launch Parlatype and open an audio " "file by clicking on the Open button in the upper left corner." msgstr "" #. (itstool) path: note/p #: C/first-steps.page:19 msgid "" "You can also drag and drop a file on Parlatype or open the " "recently used files in the Application menu." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:22 msgid "" "Now in the upper left corner there is a Play button which toggles " "between play and pause. Whenever you pause, Parlatype rewinds a " "few seconds to make it easier to resume. This can be changed in the ." msgstr "" #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/first-steps.page:24 msgctxt "_" msgid "" "external ref='figures/parlatype-main-window.png' " "md5='1e21a2ddc61fda06238b6b1537191cb3'" msgstr "" #. (itstool) path: page/p #: C/first-steps.page:26 msgid "" "The buttons Jump back and Jump forward in the lower " "left corner skip a few seconds back or ahead. The amount of time can be " "changed in the ." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:28 msgid "" "The view scrolls automatically so that the cursor is always visible. You can " "scroll manually by clicking on or dragging the scroll bar or using the " "standard keybindings. Automatic scrolling is stopped then." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:30 msgid "" "To get back to the cursor's position and let the view scroll automatically " "again, click on the Go to button next to the time label. Clicking " "on the Play button also turns automatic scrolling on." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:32 msgid "" "Clicking in the view with the right mouse button will put the cursor there, " "also holding the right mouse button pressed and moving it. The left mouse " "button is for ." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:34 msgid "" "The speed scale next to the volume button in the lower " "right corner lets you adjust the speed of playback. A value of 1 means " "normal speed, everything lower (down to 0.5) is slower, everything above is " "faster." msgstr "" #. (itstool) path: info/desc #: C/keyboard-shortcuts.page:6 msgid "Standard keyboard shortcuts in Parlatype" msgstr "" #. (itstool) path: page/title #: C/keyboard-shortcuts.page:14 msgid "Keyboard shortcuts" msgstr "" #. (itstool) path: page/p #: C/keyboard-shortcuts.page:16 msgid "" "Keyboard shortcuts for Parlatype control, like Play, " "are described in . Shortcut keys for the window are " "listed below." msgstr "" #. (itstool) path: table/title #: C/keyboard-shortcuts.page:19 msgid "Standard Shortcut keys" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:22 msgid "To Do This" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:23 msgid "Press This" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:28 msgid "Show help" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:29 msgid "F1" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:32 msgid "Open file" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:33 msgid "Ctrlo" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:36 msgid "Open recent files" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:37 msgid "Ctrlr" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:40 msgid "Go to …" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:41 msgid "Ctrlg" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:44 msgid "Copy timestamp" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:45 msgid "Ctrlc" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:48 msgid "Insert timestamp" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:49 msgid "Ctrlv" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:52 msgid "Quit" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:53 msgid "Ctrlq" msgstr "" #. (itstool) path: p/link #: C/legal.xml:5 msgid "Creative Commons Attribution-ShareAlike 4.0 International" msgstr "" #. (itstool) path: license/p #: C/legal.xml:4 msgid "This work is licensed under a <_:link-1/> license." msgstr "" #. (itstool) path: info/desc #: C/libreoffice-helpers.page:7 msgid "Use Parlatype with LibreOffice" msgstr "" #. (itstool) path: page/title #. (itstool) path: table/title #: C/libreoffice-helpers.page:15 C/libreoffice-helpers.page:30 msgid "LibreOffice Helpers" msgstr "" #. (itstool) path: page/p #: C/libreoffice-helpers.page:17 msgid "" "LibreOffice Helpers let you control Parlatype from " "LibreOffice. For example, you can jump easily to timestamps." msgstr "" #. (itstool) path: page/p #: C/libreoffice-helpers.page:19 msgid "" "To use them, you have to assign keyboard shortcuts in LibreOffice " "itself. To do this, open LibreOffice, go to menu Tools " "and select Customize." msgstr "" #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/libreoffice-helpers.page:21 msgctxt "_" msgid "" "external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" msgstr "" #. (itstool) path: page/p #: C/libreoffice-helpers.page:23 msgid "" "Go to tab Keyboard. In the lower part, Functions, " "there is a list called Category. At the end of that list you'll " "find the entry LibreOffice Macros. There is a subcategory " "share which has a subcategory Parlatype. After " "selecting Parlatype there will be a list of functions in the " "Functions list. Choose the function you'd like to use, select " "from the list Shortcut keys above a shortcut and click on the " "button Modify." msgstr "" #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/libreoffice-helpers.page:25 msgctxt "_" msgid "" "external ref='figures/lo-customize.png' " "md5='081564921275129bee7bbd10220547e7'" msgstr "" #. (itstool) path: page/p #: C/libreoffice-helpers.page:27 msgid "You can select any of these functions:" msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:33 msgid "Helper's name" msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:34 msgid "What it does" msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:40 msgid "" "Toggles between play and pause. Depending on your preferences set in " "Parlatype it will rewind a few seconds on pause." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:44 msgid "" "Jumps back a few seconds, depending on the preferences you set in " "Parlatype." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:48 msgid "" "Jumps forward a few seconds, depending on the preferences you set in " "Parlatype." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:52 msgid "" "Inserts the current timestamp at the cursor's position. It does not " "overwrite any selection." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:56 msgid "The same as above, but on a new line." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:60 msgid "" "If the cursor is set on a timestamp, it will jump to that position. The " "cursor has to be somewhere between the two number signs (#). Don't select " "the timestamp, just put the cursor inside." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:64 msgid "Increases playback speed." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:68 msgid "Decreases playback speed." msgstr "" #. (itstool) path: info/desc #: C/media-keys.page:6 msgid "How to control Parlatype with media keys" msgstr "" #. (itstool) path: page/title #: C/media-keys.page:14 msgid "Media keys" msgstr "" #. (itstool) path: page/p #: C/media-keys.page:16 msgid "" "Parlatype's basic functions can be controlled with so called " "media keys. Media keys are used system wide to control media " "players and they are working even if the media player is not in focus or in " "the background." msgstr "" #. (itstool) path: page/p #: C/media-keys.page:18 msgid "" "You can change the media keys in GNOME settings. You can use dedicated keys " "from a multimedia keyboard or use any other key or combination of keys." msgstr "" #. (itstool) path: note/p #: C/media-keys.page:21 msgid "" "This will affect other media players, e.g. Totem or " "Rhythmbox, as well." msgstr "" #. (itstool) path: page/p #: C/media-keys.page:24 msgid "Parlatype listens to these key strokes:" msgstr "" #. (itstool) path: item/p #: C/media-keys.page:26 msgid "" "Play, Pause, Stop: Each of these keys " "toggles between playing and pause." msgstr "" #. (itstool) path: item/p #: C/media-keys.page:27 msgid "" "Rewind, Previous: Each of these keys will jump back " "the time you selected in Preferences." msgstr "" #. (itstool) path: item/p #: C/media-keys.page:28 msgid "" "Fast Forward, Next: Each of these keys will jump ahead " "the time you selected in Preferences." msgstr "" #. (itstool) path: note/p #: C/media-keys.page:32 msgid "" "For detailed instructions how to change keyboard shortcuts in GNOME see the " "official " "documentation." msgstr "" #. (itstool) path: page/p #: C/media-keys.page:35 msgid "" "If you are using a dedicated foot pedal, it should be possible to map the " "foot pedal signals to any of the keys. This is not well tested, however. Any " "feedback regarding foot pedals is welcome." msgstr "" #. (itstool) path: info/desc #: C/preferences.page:6 msgid "How to customize Parlatype" msgstr "" #. (itstool) path: page/title #: C/preferences.page:14 msgid "Preferences" msgstr "" #. (itstool) path: page/p #: C/preferences.page:16 msgid "" "You can reach the preferences window in the Application Menu (next to " "Activities in the top left corner. There are three tabs: " "Waveform, Controls and Window." msgstr "" #. (itstool) path: section/title #: C/preferences.page:19 msgid "Waveform" msgstr "" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:21 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-waveform.png' " "md5='e9d05960162dcdddab10378e21ce63da'" msgstr "" #. (itstool) path: item/p #: C/preferences.page:24 msgid "" "Resolution: The resolution of the waveform image is given in pixels per " "second, e.g. the default resolution of 100 means, that one second is shown " "with a width of 100 pixels." msgstr "" #. (itstool) path: item/p #: C/preferences.page:25 msgid "" "Fixed vs. moving cursor: There are two modes, how to follow the cursor. On " "slower systems a moving cursor might be smoother." msgstr "" #. (itstool) path: item/p #: C/preferences.page:26 msgid "Show time scale: Turn the time scale on or off." msgstr "" #. (itstool) path: section/title #: C/preferences.page:31 msgid "Controls" msgstr "" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:33 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-controls.png' " "md5='0b50614222d881110b176c2e28b7d18c'" msgstr "" #. (itstool) path: item/p #: C/preferences.page:36 msgid "" "Jump back on pause: Parlatype will rewind a few seconds on each " "pause, this way you can easier resume typing. Set this value to 0 if you " "don't want this behaviour." msgstr "" #. (itstool) path: item/p #: C/preferences.page:37 msgid "" "Jump back: Configures how many seconds to skip when the Jump back " "button is pressed." msgstr "" #. (itstool) path: item/p #: C/preferences.page:38 msgid "" "Jump forward: Configures how many seconds to skip when the Jump " "forward button is pressed." msgstr "" #. (itstool) path: section/title #: C/preferences.page:43 msgid "Window" msgstr "" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:45 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-window.png' " "md5='615d876529cdd45763e78a3ee01b7b3e'" msgstr "" #. (itstool) path: item/p #: C/preferences.page:48 msgid "" "Remember position: On start-up Parlatype can position its window " "where you had it when you closed Parlatype last time. This also " "remembers the window's size." msgstr "" #. (itstool) path: item/p #: C/preferences.page:49 msgid "" "Start on top: This will put Parlatype on start-up on top of other " "windows. This might be useful if you are working with a maximized word " "processor and still want to see the Parlatype window." msgstr "" #. (itstool) path: info/desc #: C/selections.page:6 msgid "How to play and repeat a selection" msgstr "" #. (itstool) path: page/title #: C/selections.page:14 msgid "Selections" msgstr "" #. (itstool) path: page/p #: C/selections.page:16 msgid "" "You can select a piece of the waveform with the mouse. Next time you press " "Play, it will play the selection only. When it is finished and " "you press Play again, it will loop the selection once." msgstr "" #. (itstool) path: note/p #: C/selections.page:18 msgid "" "When in selection mode, you can not exit the selection anymore until you " "deselect it." msgstr "" #. (itstool) path: page/p #: C/selections.page:20 msgid "" "Selections can be made with the mouse (or pointer device) with a left click, " "holding the mouse button and dragging the pointer. If you click with " "Shift key pressed, an already existing selection will be enlarged " "to that point." msgstr "" #. (itstool) path: page/p #: C/selections.page:22 msgid "" "To deselect click once with the left button into the waveform. If the " "waveform has keyboard focus, you can press Escape." msgstr "" #. (itstool) path: info/desc #: C/timestamps.page:6 msgid "Set and go to timestamps" msgstr "" #. (itstool) path: page/title #: C/timestamps.page:14 msgid "Timestamps" msgstr "" #. (itstool) path: page/p #: C/timestamps.page:16 msgid "Timestamps help you to navigate in your transcription." msgstr "" #. (itstool) path: note/p #: C/timestamps.page:19 msgid "" "Timestamps look like this: #03:45.2#. You can select them with or without " "the number signs." msgstr "" #. (itstool) path: section/title #: C/timestamps.page:23 msgid "Drag and drop" msgstr "" #. (itstool) path: section/p #: C/timestamps.page:25 msgid "" "If you select the timestamp in the word processor, you can drag and drop it " "on the Parlatype window and it will go to that position. This is " "also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it." msgstr "" #. (itstool) path: section/title #: C/timestamps.page:29 msgid "Using the clipboard" msgstr "" #. (itstool) path: section/p #: C/timestamps.page:31 msgid "" "First make sure, the Parlatype window has focus. With the key " "sequence Ctrlc the current timestamp " "is copied to the clipboard. Changing to the word processor you can insert " "now the timestamp in your transcription." msgstr "" #. (itstool) path: section/p #: C/timestamps.page:32 msgid "" "To go to a timestamp position, copy the timestamp in the word processor to " "the clipboard. Once you have changed focus to Parlatype press " "Ctrlv." msgstr "" parlatype-1.5.4/help/he/selections.page0000644000175000017500000000221413204122227014767 00000000000000 How to play and repeat a selection Gabor Karsay gabor.karsay@gmx.at Selections

You can select a piece of the waveform with the mouse. Next time you press Play, it will play the selection only. When it is finished and you press Play again, it will loop the selection once.

When in selection mode, you can not exit the selection anymore until you deselect it.

Selections can be made with the mouse (or pointer device) with a left click, holding the mouse button and dragging the pointer. If you click with Shift key pressed, an already existing selection will be enlarged to that point.

To deselect click once with the left button into the waveform. If the waveform has keyboard focus, you can press Escape.

 parlatype-1.5.4/help/he/first-steps.page0000644000175000017500000000437313204122227015112 00000000000000 First steps with Parlatype Gabor Karsay gabor.karsay@gmx.at First steps with Parlatype

Parlatype is an easy to use audio player to help you transcribing or annotating recorded speech. You need to run a word processor, e.g. LibreOffice, too. Launch Parlatype and open an audio file by clicking on the Open button in the upper left corner.

You can also drag and drop a file on Parlatype or open the recently used files in the Application menu.

Now in the upper left corner there is a Play button which toggles between play and pause. Whenever you pause, Parlatype rewinds a few seconds to make it easier to resume. This can be changed in the .

The buttons Jump back and Jump forward in the lower left corner skip a few seconds back or ahead. The amount of time can be changed in the .

The view scrolls automatically so that the cursor is always visible. You can scroll manually by clicking on or dragging the scroll bar or using the standard keybindings. Automatic scrolling is stopped then.

To get back to the cursor's position and let the view scroll automatically again, click on the Go to button next to the time label. Clicking on the Play button also turns automatic scrolling on.

Clicking in the view with the right mouse button will put the cursor there, also holding the right mouse button pressed and moving it. The left mouse button is for .

The speed scale next to the volume button in the lower right corner lets you adjust the speed of playback. A value of 1 means normal speed, everything lower (down to 0.5) is slower, everything above is faster.

 parlatype-1.5.4/help/he/keyboard-shortcuts.page0000644000175000017500000000404713204122227016461 00000000000000 Standard keyboard shortcuts in Parlatype Gabor Karsay gabor.karsay@gmx.at Keyboard shortcuts

Keyboard shortcuts for Parlatype control, like Play, are described in . Shortcut keys for the window are listed below.

Standard Shortcut keys

To Do This

Press This

Show help

F1

Open file

Ctrlo

Open recent files

Ctrlr

Go to …

Ctrlg

Copy timestamp

Ctrlc

Insert timestamp

Ctrlv

Zoom in

Ctrl+

Zoom out

Ctrl-

Quit

Ctrlq
parlatype-1.5.4/help/he/libreoffice-helpers.page0000644000175000017500000000644713204122230016536 00000000000000 Use Parlatype with LibreOffice Gabor Karsay gabor.karsay@gmx.at LibreOffice Helpers

LibreOffice Helpers let you control Parlatype from LibreOffice. For example, you can jump easily to timestamps.

To use them, you have to assign keyboard shortcuts in LibreOffice itself. To do this, open LibreOffice, go to menu Tools and select Customize.

Go to tab Keyboard. In the lower part, Functions, there is a list called Category. At the end of that list you'll find the entry LibreOffice Macros. There is a subcategory share which has a subcategory Parlatype. After selecting Parlatype there will be a list of functions in the Functions list. Choose the function you'd like to use, select from the list Shortcut keys above a shortcut and click on the button Modify.

You can select any of these functions:

LibreOffice Helpers

Helper's name

What it does

PlayPause

Toggles between play and pause. Depending on your preferences set in Parlatype it will rewind a few seconds on pause.

JumpBack

Jumps back a few seconds, depending on the preferences you set in Parlatype.

JumpForward

Jumps forward a few seconds, depending on the preferences you set in Parlatype.

InsertTimestamp

Inserts the current timestamp at the cursor's position. It does not overwrite any selection.

InsertTimestampOnNewLine

The same as above, but on a new line.

GotoTimestamp

If the cursor is set on a timestamp, it will jump to that position. The cursor has to be somewhere between the two number signs (#). Don't select the timestamp, just put the cursor inside.

IncreaseSpeed

Increases playback speed.

DecreaseSpeed

Decreases playback speed.
parlatype-1.5.4/help/he/he.stamp0000644000175000017500000000000013204122230013404 00000000000000parlatype-1.5.4/help/he/preferences.page0000644000175000017500000000475513204122227015134 00000000000000 How to customize Parlatype Gabor Karsay gabor.karsay@gmx.at Preferences

You can reach the preferences window in the Application Menu (next to Activities in the top left corner. There are three tabs: Waveform, Controls and Window.

Waveform

Resolution: The resolution of the waveform image is given in pixels per second, e.g. the default resolution of 100 means, that one second is shown with a width of 100 pixels.

Fixed vs. moving cursor: There are two modes, how to follow the cursor. On slower systems a moving cursor might be smoother.

Show time scale: Turn the time scale on or off.
Controls

Jump back on pause: Parlatype will rewind a few seconds on each pause, this way you can easier resume typing. Set this value to 0 if you don't want this behaviour.

Jump back: Configures how many seconds to skip when the Jump back button is pressed.

Jump forward: Configures how many seconds to skip when the Jump forward button is pressed.
Window

Remember size: On start-up Parlatype sets the window size to the size it had the last time.

Remember position: On start-up Parlatype can position its window where you had it when you closed Parlatype last time.

Start on top: This will put Parlatype on start-up on top of other windows. This might be useful if you are working with a maximized word processor and still want to see the Parlatype window.

Remember position and Start on top are not available on Wayland.
parlatype-1.5.4/help/he/index.page0000644000175000017500000000173613204122227013736 00000000000000 Parlatype Parlatype Gabor Karsay gabor.karsay@gmx.at Parlatype is an easy to use media player. Its main purpose is to help you transcribing speech. <media type="image" mime="image/png" src="figures/parlatype-icon.png" its:translate="no"/> Parlatype

Parlatype is an easy to use media player. Its main purpose is to help you transcribing speech.

For a quick overview have a look at . Other topics are covered below.

Help topics
parlatype-1.5.4/help/he/drag-and-drop.page0000644000175000017500000000264413204122227015245 00000000000000 Drop files, file names or timestamps on Parlatype Gabor Karsay gabor.karsay@gmx.at Drag and Drop

You can drop files, file names or timestamps on Parlatype's window.

Files: Drag and drop a file from a file manager, e.g. Files, on Parlatype and it will open that file.

File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that file. This will always work if the selection contains a full path. If you select the name only, Parlatype will look up its full path in the list of recent files and open it if it can find it in that list.

Timestamps: You can drag and drop timestamps in both directions. Select a timestamp from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will jump to that position. Or you click on Parlatype's time label and drag it to a word processor to insert it there.

 parlatype-1.5.4/help/he/media-keys.page0000644000175000017500000000342713204122227014656 00000000000000 How to control Parlatype with media keys Gabor Karsay gabor.karsay@gmx.at Media keys

Parlatype's basic functions can be controlled with so called media keys. Media keys are used system wide to control media players and they are working even if the media player is not in focus or in the background.

You can change the media keys in GNOME settings. You can use dedicated keys from a multimedia keyboard or use any other key or combination of keys.

This will affect other media players, e.g. Totem or Rhythmbox, as well.

Parlatype listens to these key strokes:

Play, Pause, Stop: Each of these keys toggles between playing and pause.

Rewind, Previous: Each of these keys will jump back the time you selected in Preferences.

Fast Forward, Next: Each of these keys will jump ahead the time you selected in Preferences.

For detailed instructions how to change keyboard shortcuts in GNOME see the official documentation.

If you are using a dedicated foot pedal, it should be possible to map the foot pedal signals to any of the keys. This is not well tested, however. Any feedback regarding foot pedals is welcome.

 parlatype-1.5.4/help/he/timestamps.page0000644000175000017500000000300013204122230014771 00000000000000 Set and go to timestamps Gabor Karsay gabor.karsay@gmx.at Timestamps

Timestamps help you to navigate in your transcription.

Timestamps look like this: #03:45.2#. You can select them with or without the number signs.
Drag and drop

If you select the timestamp in the word processor, you can drag and drop it on the Parlatype window and it will go to that position. This is also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it.

Using the clipboard

First make sure, the Parlatype window has focus. With the key sequence Ctrlc the current timestamp is copied to the clipboard. Changing to the word processor you can insert now the timestamp in your transcription.

To go to a timestamp position, copy the timestamp in the word processor to the clipboard. Once you have changed focus to Parlatype press Ctrlv.

 parlatype-1.5.4/help/he/legal.xml0000644000175000017500000000051413204122227013570 00000000000000

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International license.

 parlatype-1.5.4/help/lt/0000755000175000017500000000000013204324054012067 500000000000000parlatype-1.5.4/help/lt/selections.page0000644000175000017500000000232113204122231015004 00000000000000 Kaip groti ir kartoti žymėjimą Gabor Karsay gabor.karsay@gmx.at Žymėjimai

Jūs galite pažymėti bangos formos dalį, naudodami pelę. Kitą kartą jums spustelėjus Groti, bus grojamas tik žymėjimas. Užbaigus groti žymėjimą ir jums dar kartą paspaudus Groti, žymėjimas bus pakartotas vieną kartą.

Esant žymėjimo veiksenoje, jūs daugiau nebegalite išeiti iš žymėjimo tol, kol nepanaikinsite žymėjimą.

Selections can be made with the mouse (or pointer device) with a left click, holding the mouse button and dragging the pointer. If you click with Shift key pressed, an already existing selection will be enlarged to that point.

To deselect click once with the left button into the waveform. If the waveform has keyboard focus, you can press Escape.

 parlatype-1.5.4/help/lt/first-steps.page0000644000175000017500000000471413204122231015127 00000000000000 Pirmieji žingsniai su Parlatype Gabor Karsay gabor.karsay@gmx.at Pirmieji žingsniai su Parlatype

Parlatype yra lengvas naudoti garso grotuvas, skirtas padėti jums perrašyti įrašytą kalbėjimą ar rašyti jam pastabas. Jums taip pat reikia paleisti tekstų rengyklę, pvz., LibreOffice. Paleiskite Parlatype ir viršutiniame kairiajame kampe spusteldami mygtuką Atverti, atverkite garso failą.

Jūs taip pat galite vilkti failą į Parlatype arba programos meniu atverti paskiausiai naudotus failus.

Dabar viršutiniame kairiajame kampe yra mygtukas Groti, kuris perjungia grojimą arba pristabdymą. Kai pristabdote, Parlatype atsuka kelias sekundes atgal tam, kad būtų lengviau pratęsti. Tai galima pakeisti perėjus į .

Apatiniame kairiajame kampe esantys mygtukai Peršokti atgal ir Peršokti pirmyn peršoka kelias sekundes atgal arba pirmyn. Laiko kiekis gali būti keičiamas skyrelyje .

Rodinys yra slenkamas automatiškai, taigi tokiu būdu žymeklis visada yra matomas. Jūs galite slinkti rankiniu būdu, spustelėdami ant slankjuostės ar vilkdami ją arba naudodami standartinius klavišų susiejimus. Tuomet automatinis slinkimas yra sustabdomas.

Norėdami grįžti prie žymeklio pozicijos ir leisti rodiniui vėl automatiškai slinktis, šalia laiko etiketės spustelėkite ant mygtuko Eiti. Spustelėjimas ant mygtuko Groti taip pat įjungia automatinį slinkimą.

Clicking in the view with the right mouse button will put the cursor there, also holding the right mouse button pressed and moving it. The left mouse button is for .

The speed scale next to the volume button in the lower right corner lets you adjust the speed of playback. A value of 1 means normal speed, everything lower (down to 0.5) is slower, everything above is faster.

 parlatype-1.5.4/help/lt/keyboard-shortcuts.page0000644000175000017500000000415513204122231016477 00000000000000 Standartiniai Parlatype klaviatūros trumpiniai Gabor Karsay gabor.karsay@gmx.at Klaviatūros trumpiniai

Parlatype valdymo trumpiniai, tokie kaip Groti, yra aprašyti skyrelyje . Lango trumpiniai yra išvardyti žemiau.

Standartiniai trumpiniai

Norėdami atlikti tai

Paspauskite tai

Rodyti žinyną

F1

Atverti failą

Valdo

Atverti paskiausiai naudotus failus

Valdr

Eiti …

Valdg

Kopijuoti laiko žymą

Valdc

Įterpti laiko žymą

Valdv

Didinti

Vald+

Mažinti

Vald-

Išeiti

Valdq
parlatype-1.5.4/help/lt/libreoffice-helpers.page0000644000175000017500000000646613204122231016563 00000000000000 Use Parlatype with LibreOffice Gabor Karsay gabor.karsay@gmx.at LibreOffice pagelbikliai

LibreOffice Helpers let you control Parlatype from LibreOffice. For example, you can jump easily to timestamps.

To use them, you have to assign keyboard shortcuts in LibreOffice itself. To do this, open LibreOffice, go to menu Tools and select Customize.

Go to tab Keyboard. In the lower part, Functions, there is a list called Category. At the end of that list you'll find the entry LibreOffice Macros. There is a subcategory share which has a subcategory Parlatype. After selecting Parlatype there will be a list of functions in the Functions list. Choose the function you'd like to use, select from the list Shortcut keys above a shortcut and click on the button Modify.

You can select any of these functions:

LibreOffice pagelbikliai

Helper's name

What it does

PlayPause

Toggles between play and pause. Depending on your preferences set in Parlatype it will rewind a few seconds on pause.

JumpBack

Jumps back a few seconds, depending on the preferences you set in Parlatype.

JumpForward

Jumps forward a few seconds, depending on the preferences you set in Parlatype.

InsertTimestamp

Inserts the current timestamp at the cursor's position. It does not overwrite any selection.

InsertTimestampOnNewLine

The same as above, but on a new line.

GotoTimestamp

If the cursor is set on a timestamp, it will jump to that position. The cursor has to be somewhere between the two number signs (#). Don't select the timestamp, just put the cursor inside.

IncreaseSpeed

Padidina atkūrimo greitį.

DecreaseSpeed

Sumažina atkūrimo greitį.
parlatype-1.5.4/help/lt/preferences.page0000644000175000017500000000476113204122231015147 00000000000000 How to customize Parlatype Gabor Karsay gabor.karsay@gmx.at Nuostatos

You can reach the preferences window in the Application Menu (next to Activities in the top left corner. There are three tabs: Waveform, Controls and Window.

Bangos forma

Resolution: The resolution of the waveform image is given in pixels per second, e.g. the default resolution of 100 means, that one second is shown with a width of 100 pixels.

Fixed vs. moving cursor: There are two modes, how to follow the cursor. On slower systems a moving cursor might be smoother.

Show time scale: Turn the time scale on or off.
Valdikliai

Jump back on pause: Parlatype will rewind a few seconds on each pause, this way you can easier resume typing. Set this value to 0 if you don't want this behaviour.

Jump back: Configures how many seconds to skip when the Jump back button is pressed.

Jump forward: Configures how many seconds to skip when the Jump forward button is pressed.
Langas

Remember size: On start-up Parlatype sets the window size to the size it had the last time.

Remember position: On start-up Parlatype can position its window where you had it when you closed Parlatype last time.

Start on top: This will put Parlatype on start-up on top of other windows. This might be useful if you are working with a maximized word processor and still want to see the Parlatype window.

Remember position and Start on top are not available on Wayland.
parlatype-1.5.4/help/lt/index.page0000644000175000017500000000200313204122231013740 00000000000000 Parlatype Parlatype Gabor Karsay gabor.karsay@gmx.at Parlatype yra lengvas naudoti medijos grotuvas. Jo pagrindinis tikslas yra padėti jums perrašyti kalbėjimą. <media type="image" mime="image/png" src="figures/parlatype-icon.png" its:translate="no"/> Parlatype

Parlatype yra lengvas naudoti medijos grotuvas. Jo pagrindinis tikslas yra padėti jums perrašyti kalbėjimą.

Greitai apžvalgai, užmeskite akį į . Kitos temos yra aprašytos žemiau.

Žinyno temos
parlatype-1.5.4/help/lt/drag-and-drop.page0000644000175000017500000000300513204122231015253 00000000000000 Vilkite failus, failų pavadinimus ar laiko žymes į Parlatype Gabor Karsay gabor.karsay@gmx.at Vilkimas

Jūs galite vilkti failus, failų pavadinimus ar laiko žymes į Parlatype langą.

Failai: Vilkite failą iš failų tvarkytuvės pvz., iš Failų, į Parlatype ir programa atvers tą failą.

Failų pavadinimai: Pažymėkite tekstų rengyklėje, pvz., LibreOffice, failo pavadinimą ir vilkite pažymėtą tekstą į Parlatype, ir programa atvers tą failą. Tai visada suveiks, jei žymėjime bus pilnas kelias. Jei pažymėsite tik pavadinimą, Parlatype atliks failo paiešką paskiausiai naudotų failų sąraše ir jeigu jį ras, iš karto atvers.

Laiko žymos: Jūs galite vilkti laiko žymas abejomis kryptimis. Pažymėkite tekstų rengyklėje, pvz., LibreOffice, laiko žymą ir vilkite pažymėtą tekstą į Parlatype ir program peršoks į tą poziciją. Arba spustelėkite ant Parlatype laiko etiketės ir vilkite ją į tekstų rengyklę, kad ten ją įterptumėte.

 parlatype-1.5.4/help/lt/lt.stamp0000644000175000017500000000000013204122231013453 00000000000000parlatype-1.5.4/help/lt/media-keys.page0000644000175000017500000000342713204122231014674 00000000000000 How to control Parlatype with media keys Gabor Karsay gabor.karsay@gmx.at Media keys

Parlatype's basic functions can be controlled with so called media keys. Media keys are used system wide to control media players and they are working even if the media player is not in focus or in the background.

You can change the media keys in GNOME settings. You can use dedicated keys from a multimedia keyboard or use any other key or combination of keys.

This will affect other media players, e.g. Totem or Rhythmbox, as well.

Parlatype listens to these key strokes:

Play, Pause, Stop: Each of these keys toggles between playing and pause.

Rewind, Previous: Each of these keys will jump back the time you selected in Preferences.

Fast Forward, Next: Each of these keys will jump ahead the time you selected in Preferences.

For detailed instructions how to change keyboard shortcuts in GNOME see the official documentation.

If you are using a dedicated foot pedal, it should be possible to map the foot pedal signals to any of the keys. This is not well tested, however. Any feedback regarding foot pedals is welcome.

 parlatype-1.5.4/help/lt/timestamps.page0000644000175000017500000000300013204122231015015 00000000000000 Set and go to timestamps Gabor Karsay gabor.karsay@gmx.at Timestamps

Timestamps help you to navigate in your transcription.

Timestamps look like this: #03:45.2#. You can select them with or without the number signs.
Drag and drop

If you select the timestamp in the word processor, you can drag and drop it on the Parlatype window and it will go to that position. This is also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it.

Using the clipboard

First make sure, the Parlatype window has focus. With the key sequence Ctrlc the current timestamp is copied to the clipboard. Changing to the word processor you can insert now the timestamp in your transcription.

To go to a timestamp position, copy the timestamp in the word processor to the clipboard. Once you have changed focus to Parlatype press Ctrlv.

 parlatype-1.5.4/help/lt/legal.xml0000644000175000017500000000051713204122231013611 00000000000000

Šis darbas yra licencijuotas pagal Creative Commons analogiško platinimo 4.0 tarptautinę licenciją.

 parlatype-1.5.4/help/lt/lt.po0000644000175000017500000006462213176574164013021 00000000000000# Lithuanian translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Moo , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-07-20 16:20+0200\n" "PO-Revision-Date: 2017-07-16 16:03+0000\n" "Last-Translator: Moo \n" "Language-Team: Lithuanian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-07-30 07:24+0000\n" "X-Generator: Launchpad (build 18441)\n" #. Put one translator per line, in the form NAME , YEAR1, YEAR2 msgctxt "_" msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Moo https://launchpad.net/~mooo" #. (itstool) path: info/title #: C/index.page:7 msgctxt "text" msgid "Parlatype" msgstr "Parlatype" #. (itstool) path: info/title #: C/index.page:8 msgctxt "link" msgid "Parlatype" msgstr "Parlatype" #. (itstool) path: credit/name #: C/index.page:10 #: C/drag-and-drop.page:8 #: C/first-steps.page:8 #: C/keyboard-shortcuts.page:8 #: C/media-keys.page:8 #: C/preferences.page:8 #: C/selections.page:8 #: C/timestamps.page:8 #: C/libreoffice-helpers.page:9 msgid "Gabor Karsay" msgstr "Gabor Karsay" #. (itstool) path: info/desc #. (itstool) path: page/p #: C/index.page:14 #: C/index.page:23 msgid "" "Parlatype is an easy to use media player. Its main purpose is to " "help you transcribing speech." msgstr "" "Parlatype yra lengvas naudoti medijos grotuvas. Jo pagrindinis " "tikslas yra padėti jums perrašyti kalbėjimą." #. (itstool) path: page/title #: C/index.page:18 msgid "<_:media-1/> Parlatype" msgstr "<_:media-1/> Parlatype" #. (itstool) path: page/p #: C/index.page:24 msgid "" "For a quick overview have a look at . Other " "topics are covered below." msgstr "" "Greitai apžvalgai, užmeskite akį į . Kitos temos " "yra aprašytos žemiau." #. (itstool) path: section/title #: C/index.page:27 msgid "Help topics" msgstr "Žinyno temos" #. (itstool) path: info/desc #: C/drag-and-drop.page:6 msgid "Drop files, file names or timestamps on Parlatype" msgstr "Vilkite failus, failų pavadinimus ar laiko žymes į Parlatype" #. (itstool) path: page/title #: C/drag-and-drop.page:14 msgid "Drag and Drop" msgstr "Vilkimas" #. (itstool) path: page/p #: C/drag-and-drop.page:16 msgid "" "You can drop files, file names or timestamps on Parlatype's " "window." msgstr "" "Jūs galite vilkti failus, failų pavadinimus ar laiko žymes į " "Parlatype langą." #. (itstool) path: item/p #: C/drag-and-drop.page:19 msgid "" "Files: Drag and drop a file from a file manager, e.g. Files, on " "Parlatype and it will open that file." msgstr "" "Failai: Vilkite failą iš failų tvarkytuvės pvz., iš Failų, į " "Parlatype ir programa atvers tą failą." #. (itstool) path: item/p #: C/drag-and-drop.page:20 msgid "" "File names: Select a file name from a word processor, e.g. " "LibreOffice, drop the selected text on Parlatype and " "it will open that file. This will always work if the selection contains a " "full path. If you select the name only, Parlatype will look up " "its full path in the list of recent files and open it if it can find it in " "that list." msgstr "" "Failų pavadinimai: Pažymėkite tekstų rengyklėje, pvz., " "LibreOffice, failo pavadinimą ir vilkite pažymėtą tekstą į " "Parlatype, ir programa atvers tą failą. Tai visada suveiks, jei " "žymėjime bus pilnas kelias. Jei pažymėsite tik pavadinimą, " "Parlatype atliks failo paiešką paskiausiai naudotų failų sąraše " "ir jeigu jį ras, iš karto atvers." #. (itstool) path: item/p #: C/drag-and-drop.page:21 msgid "" "Timestamps: You can drag and drop timestamps in both directions. Select a " "timestamp from a word processor, e.g. LibreOffice, drop the " "selected text on Parlatype and it will jump to that position. Or " "you click on Parlatype's time label and drag it to a word " "processor to insert it there." msgstr "" "Laiko žymos: Jūs galite vilkti laiko žymas abejomis kryptimis. Pažymėkite " "tekstų rengyklėje, pvz., LibreOffice, laiko žymą ir vilkite " "pažymėtą tekstą į Parlatype ir program peršoks į tą poziciją. " "Arba spustelėkite ant Parlatype laiko etiketės ir vilkite ją į " "tekstų rengyklę, kad ten ją įterptumėte." #. (itstool) path: info/desc #. (itstool) path: page/title #: C/first-steps.page:6 #: C/first-steps.page:14 msgid "First steps with Parlatype" msgstr "Pirmieji žingsniai su Parlatype" #. (itstool) path: page/p #: C/first-steps.page:16 msgid "" "Parlatype is an easy to use audio player to help you transcribing " "or annotating recorded speech. You need to run a word processor, e.g. " "LibreOffice, too. Launch Parlatype and open an audio " "file by clicking on the Open button in the upper left corner." msgstr "" "Parlatype yra lengvas naudoti garso grotuvas, skirtas padėti jums " "perrašyti įrašytą kalbėjimą ar rašyti jam pastabas. Jums taip pat reikia " "paleisti tekstų rengyklę, pvz., LibreOffice. Paleiskite " "Parlatype ir viršutiniame kairiajame kampe spusteldami mygtuką " "Atverti, atverkite garso failą." #. (itstool) path: note/p #: C/first-steps.page:19 msgid "" "You can also drag and drop a file on Parlatype or open the " "recently used files in the Application menu." msgstr "" "Jūs taip pat galite vilkti failą į Parlatype arba programos meniu " "atverti paskiausiai naudotus failus." #. (itstool) path: page/p #: C/first-steps.page:22 msgid "" "Now in the upper left corner there is a Play button which toggles " "between play and pause. Whenever you pause, Parlatype rewinds a " "few seconds to make it easier to resume. This can be changed in the ." msgstr "" "Dabar viršutiniame kairiajame kampe yra mygtukas Groti, kuris " "perjungia grojimą arba pristabdymą. Kai pristabdote, Parlatype " "atsuka kelias sekundes atgal tam, kad būtų lengviau pratęsti. Tai galima " "pakeisti perėjus į ." #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/first-steps.page:24 msgctxt "_" msgid "" "external ref='figures/parlatype-main-window.png' " "md5='1e21a2ddc61fda06238b6b1537191cb3'" msgstr "" "external ref='figures/parlatype-main-window.png' " "md5='1e21a2ddc61fda06238b6b1537191cb3'" #. (itstool) path: page/p #: C/first-steps.page:26 msgid "" "The buttons Jump back and Jump forward in the lower " "left corner skip a few seconds back or ahead. The amount of time can be " "changed in the ." msgstr "" "Apatiniame kairiajame kampe esantys mygtukai Peršokti atgal ir " "Peršokti pirmyn peršoka kelias sekundes atgal arba pirmyn. Laiko " "kiekis gali būti keičiamas skyrelyje ." #. (itstool) path: page/p #: C/first-steps.page:28 msgid "" "The view scrolls automatically so that the cursor is always visible. You can " "scroll manually by clicking on or dragging the scroll bar or using the " "standard keybindings. Automatic scrolling is stopped then." msgstr "" "Rodinys yra slenkamas automatiškai, taigi tokiu būdu žymeklis visada yra " "matomas. Jūs galite slinkti rankiniu būdu, spustelėdami ant slankjuostės ar " "vilkdami ją arba naudodami standartinius klavišų susiejimus. Tuomet " "automatinis slinkimas yra sustabdomas." #. (itstool) path: page/p #: C/first-steps.page:30 msgid "" "To get back to the cursor's position and let the view scroll automatically " "again, click on the Go to button next to the time label. Clicking " "on the Play button also turns automatic scrolling on." msgstr "" "Norėdami grįžti prie žymeklio pozicijos ir leisti rodiniui vėl automatiškai " "slinktis, šalia laiko etiketės spustelėkite ant mygtuko Eiti. " "Spustelėjimas ant mygtuko Groti taip pat įjungia automatinį " "slinkimą." #. (itstool) path: page/p #: C/first-steps.page:32 msgid "" "Clicking in the view with the right mouse button will put the cursor there, " "also holding the right mouse button pressed and moving it. The left mouse " "button is for ." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:34 msgid "" "The speed scale next to the volume button in the lower " "right corner lets you adjust the speed of playback. A value of 1 means " "normal speed, everything lower (down to 0.5) is slower, everything above is " "faster." msgstr "" #. (itstool) path: info/desc #: C/keyboard-shortcuts.page:6 msgid "Standard keyboard shortcuts in Parlatype" msgstr "Standartiniai Parlatype klaviatūros trumpiniai" #. (itstool) path: page/title #: C/keyboard-shortcuts.page:14 msgid "Keyboard shortcuts" msgstr "Klaviatūros trumpiniai" #. (itstool) path: page/p #: C/keyboard-shortcuts.page:16 msgid "" "Keyboard shortcuts for Parlatype control, like Play, " "are described in . Shortcut keys for the window are " "listed below." msgstr "" "Parlatype valdymo trumpiniai, tokie kaip Groti, yra " "aprašyti skyrelyje . Lango trumpiniai yra išvardyti " "žemiau." #. (itstool) path: table/title #: C/keyboard-shortcuts.page:19 msgid "Standard Shortcut keys" msgstr "Standartiniai trumpiniai" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:22 msgid "To Do This" msgstr "Norėdami atlikti tai" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:23 msgid "Press This" msgstr "Paspauskite tai" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:28 msgid "Show help" msgstr "Rodyti žinyną" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:29 msgid "F1" msgstr "F1" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:32 msgid "Open file" msgstr "Atverti failą" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:33 msgid "Ctrlo" msgstr "Valdo" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:36 msgid "Open recent files" msgstr "Atverti paskiausiai naudotus failus" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:37 msgid "Ctrlr" msgstr "Valdr" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:40 msgid "Go to …" msgstr "Eiti …" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:41 msgid "Ctrlg" msgstr "Valdg" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:44 msgid "Copy timestamp" msgstr "Kopijuoti laiko žymą" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:45 msgid "Ctrlc" msgstr "Valdc" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:48 msgid "Insert timestamp" msgstr "Įterpti laiko žymą" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:49 msgid "Ctrlv" msgstr "Valdv" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:52 msgid "Zoom in" msgstr "Didinti" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:53 msgid "Ctrl+" msgstr "Vald+" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:56 msgid "Zoom out" msgstr "Mažinti" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:57 msgid "Ctrl-" msgstr "Vald-" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:60 msgid "Quit" msgstr "Išeiti" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:61 msgid "Ctrlq" msgstr "Valdq" #. (itstool) path: p/link #: C/legal.xml:5 msgid "Creative Commons Attribution-ShareAlike 4.0 International" msgstr "Creative Commons analogiško platinimo 4.0 tarptautinę" #. (itstool) path: license/p #: C/legal.xml:4 msgid "This work is licensed under a <_:link-1/> license." msgstr "Šis darbas yra licencijuotas pagal <_:link-1/> licenciją." #. (itstool) path: info/desc #: C/media-keys.page:6 msgid "How to control Parlatype with media keys" msgstr "" #. (itstool) path: page/title #: C/media-keys.page:14 msgid "Media keys" msgstr "" #. (itstool) path: page/p #: C/media-keys.page:16 msgid "" "Parlatype's basic functions can be controlled with so called " "media keys. Media keys are used system wide to control media " "players and they are working even if the media player is not in focus or in " "the background." msgstr "" #. (itstool) path: page/p #: C/media-keys.page:18 msgid "" "You can change the media keys in GNOME settings. You can use dedicated keys " "from a multimedia keyboard or use any other key or combination of keys." msgstr "" #. (itstool) path: note/p #: C/media-keys.page:21 msgid "" "This will affect other media players, e.g. Totem or " "Rhythmbox, as well." msgstr "" #. (itstool) path: page/p #: C/media-keys.page:24 msgid "Parlatype listens to these key strokes:" msgstr "" #. (itstool) path: item/p #: C/media-keys.page:26 msgid "" "Play, Pause, Stop: Each of these keys " "toggles between playing and pause." msgstr "" #. (itstool) path: item/p #: C/media-keys.page:27 msgid "" "Rewind, Previous: Each of these keys will jump back " "the time you selected in Preferences." msgstr "" #. (itstool) path: item/p #: C/media-keys.page:28 msgid "" "Fast Forward, Next: Each of these keys will jump ahead " "the time you selected in Preferences." msgstr "" #. (itstool) path: note/p #: C/media-keys.page:32 msgid "" "For detailed instructions how to change keyboard shortcuts in GNOME see the " "official " "documentation." msgstr "" #. (itstool) path: page/p #: C/media-keys.page:35 msgid "" "If you are using a dedicated foot pedal, it should be possible to map the " "foot pedal signals to any of the keys. This is not well tested, however. Any " "feedback regarding foot pedals is welcome." msgstr "" #. (itstool) path: info/desc #: C/preferences.page:6 msgid "How to customize Parlatype" msgstr "" #. (itstool) path: page/title #: C/preferences.page:14 msgid "Preferences" msgstr "Nuostatos" #. (itstool) path: page/p #: C/preferences.page:16 msgid "" "You can reach the preferences window in the Application Menu (next to " "Activities in the top left corner. There are three tabs: " "Waveform, Controls and Window." msgstr "" #. (itstool) path: section/title #: C/preferences.page:19 msgid "Waveform" msgstr "Bangos forma" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:21 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-waveform.png' " "md5='e9d05960162dcdddab10378e21ce63da'" msgstr "" "external ref='figures/parlatype-prefs-waveform.png' " "md5='e9d05960162dcdddab10378e21ce63da'" #. (itstool) path: item/p #: C/preferences.page:24 msgid "" "Resolution: The resolution of the waveform image is given in pixels per " "second, e.g. the default resolution of 100 means, that one second is shown " "with a width of 100 pixels." msgstr "" #. (itstool) path: item/p #: C/preferences.page:25 msgid "" "Fixed vs. moving cursor: There are two modes, how to follow the cursor. On " "slower systems a moving cursor might be smoother." msgstr "" #. (itstool) path: item/p #: C/preferences.page:26 msgid "Show time scale: Turn the time scale on or off." msgstr "" #. (itstool) path: section/title #: C/preferences.page:31 msgid "Controls" msgstr "Valdikliai" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:33 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-controls.png' " "md5='0b50614222d881110b176c2e28b7d18c'" msgstr "" "external ref='figures/parlatype-prefs-controls.png' " "md5='0b50614222d881110b176c2e28b7d18c'" #. (itstool) path: item/p #: C/preferences.page:36 msgid "" "Jump back on pause: Parlatype will rewind a few seconds on each " "pause, this way you can easier resume typing. Set this value to 0 if you " "don't want this behaviour." msgstr "" #. (itstool) path: item/p #: C/preferences.page:37 msgid "" "Jump back: Configures how many seconds to skip when the Jump back " "button is pressed." msgstr "" #. (itstool) path: item/p #: C/preferences.page:38 msgid "" "Jump forward: Configures how many seconds to skip when the Jump " "forward button is pressed." msgstr "" #. (itstool) path: section/title #: C/preferences.page:43 msgid "Window" msgstr "Langas" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:45 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-window.png' " "md5='6affc475c74223fa48e7de25393fe7de'" msgstr "" #. (itstool) path: item/p #: C/preferences.page:48 msgid "" "Remember size: On start-up Parlatype sets the window size to the " "size it had the last time." msgstr "" #. (itstool) path: item/p #: C/preferences.page:49 msgid "" "Remember position: On start-up Parlatype can position its window " "where you had it when you closed Parlatype last time." msgstr "" #. (itstool) path: item/p #: C/preferences.page:50 msgid "" "Start on top: This will put Parlatype on start-up on top of other " "windows. This might be useful if you are working with a maximized word " "processor and still want to see the Parlatype window." msgstr "" #. (itstool) path: note/p #: C/preferences.page:54 msgid "" "Remember position and Start on top are not available " "on Wayland." msgstr "" #. (itstool) path: info/desc #: C/selections.page:6 msgid "How to play and repeat a selection" msgstr "Kaip groti ir kartoti žymėjimą" #. (itstool) path: page/title #: C/selections.page:14 msgid "Selections" msgstr "Žymėjimai" #. (itstool) path: page/p #: C/selections.page:16 msgid "" "You can select a piece of the waveform with the mouse. Next time you press " "Play, it will play the selection only. When it is finished and " "you press Play again, it will loop the selection once." msgstr "" "Jūs galite pažymėti bangos formos dalį, naudodami pelę. Kitą kartą jums " "spustelėjus Groti, bus grojamas tik žymėjimas. Užbaigus groti " "žymėjimą ir jums dar kartą paspaudus Groti, žymėjimas bus " "pakartotas vieną kartą." #. (itstool) path: note/p #: C/selections.page:18 msgid "" "When in selection mode, you can not exit the selection anymore until you " "deselect it." msgstr "" "Esant žymėjimo veiksenoje, jūs daugiau nebegalite išeiti iš žymėjimo tol, " "kol nepanaikinsite žymėjimą." #. (itstool) path: page/p #: C/selections.page:20 msgid "" "Selections can be made with the mouse (or pointer device) with a left click, " "holding the mouse button and dragging the pointer. If you click with " "Shift key pressed, an already existing selection will be enlarged " "to that point." msgstr "" #. (itstool) path: page/p #: C/selections.page:22 msgid "" "To deselect click once with the left button into the waveform. If the " "waveform has keyboard focus, you can press Escape." msgstr "" #. (itstool) path: info/desc #: C/timestamps.page:6 msgid "Set and go to timestamps" msgstr "" #. (itstool) path: page/title #: C/timestamps.page:14 msgid "Timestamps" msgstr "" #. (itstool) path: page/p #: C/timestamps.page:16 msgid "Timestamps help you to navigate in your transcription." msgstr "" #. (itstool) path: note/p #: C/timestamps.page:19 msgid "" "Timestamps look like this: #03:45.2#. You can select them with or without " "the number signs." msgstr "" #. (itstool) path: section/title #: C/timestamps.page:23 msgid "Drag and drop" msgstr "" #. (itstool) path: section/p #: C/timestamps.page:25 msgid "" "If you select the timestamp in the word processor, you can drag and drop it " "on the Parlatype window and it will go to that position. This is " "also possible the other way round: Drag the time label from " "Parlatype to a word processor and drop it there to insert it." msgstr "" #. (itstool) path: section/title #: C/timestamps.page:29 msgid "Using the clipboard" msgstr "" #. (itstool) path: section/p #: C/timestamps.page:31 msgid "" "First make sure, the Parlatype window has focus. With the key " "sequence Ctrlc the current timestamp " "is copied to the clipboard. Changing to the word processor you can insert " "now the timestamp in your transcription." msgstr "" #. (itstool) path: section/p #: C/timestamps.page:32 msgid "" "To go to a timestamp position, copy the timestamp in the word processor to " "the clipboard. Once you have changed focus to Parlatype press " "Ctrlv." msgstr "" #. (itstool) path: info/desc #: C/libreoffice-helpers.page:7 msgid "Use Parlatype with LibreOffice" msgstr "" #. (itstool) path: page/title #. (itstool) path: table/title #: C/libreoffice-helpers.page:15 #: C/libreoffice-helpers.page:30 msgid "LibreOffice Helpers" msgstr "LibreOffice pagelbikliai" #. (itstool) path: page/p #: C/libreoffice-helpers.page:17 msgid "" "LibreOffice Helpers let you control Parlatype from " "LibreOffice. For example, you can jump easily to timestamps." msgstr "" #. (itstool) path: page/p #: C/libreoffice-helpers.page:19 msgid "" "To use them, you have to assign keyboard shortcuts in LibreOffice " "itself. To do this, open LibreOffice, go to menu Tools " "and select Customize." msgstr "" #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/libreoffice-helpers.page:21 msgctxt "_" msgid "" "external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" msgstr "" "external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" #. (itstool) path: page/p #: C/libreoffice-helpers.page:23 msgid "" "Go to tab Keyboard. In the lower part, Functions, " "there is a list called Category. At the end of that list you'll " "find the entry LibreOffice Macros. There is a subcategory " "share which has a subcategory Parlatype. After " "selecting Parlatype there will be a list of functions in the " "Functions list. Choose the function you'd like to use, select " "from the list Shortcut keys above a shortcut and click on the " "button Modify." msgstr "" #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/libreoffice-helpers.page:25 msgctxt "_" msgid "" "external ref='figures/lo-customize.png' " "md5='081564921275129bee7bbd10220547e7'" msgstr "" "external ref='figures/lo-customize.png' " "md5='081564921275129bee7bbd10220547e7'" #. (itstool) path: page/p #: C/libreoffice-helpers.page:27 msgid "You can select any of these functions:" msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:33 msgid "Helper's name" msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:34 msgid "What it does" msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:40 msgid "" "Toggles between play and pause. Depending on your preferences set in " "Parlatype it will rewind a few seconds on pause." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:44 msgid "" "Jumps back a few seconds, depending on the preferences you set in " "Parlatype." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:48 msgid "" "Jumps forward a few seconds, depending on the preferences you set in " "Parlatype." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:52 msgid "" "Inserts the current timestamp at the cursor's position. It does not " "overwrite any selection." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:56 msgid "The same as above, but on a new line." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:60 msgid "" "If the cursor is set on a timestamp, it will jump to that position. The " "cursor has to be somewhere between the two number signs (#). Don't select " "the timestamp, just put the cursor inside." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:64 msgid "Increases playback speed." msgstr "Padidina atkūrimo greitį." #. (itstool) path: td/p #: C/libreoffice-helpers.page:68 msgid "Decreases playback speed." msgstr "Sumažina atkūrimo greitį." parlatype-1.5.4/help/id/0000755000175000017500000000000013204324054012044 500000000000000parlatype-1.5.4/help/id/id.stamp0000644000175000017500000000000013204122230013404 00000000000000parlatype-1.5.4/help/id/selections.page0000644000175000017500000000230613204122230014763 00000000000000 Bagaimana memainkan dan mengulangi pilihan Gabor Karsay gabor.karsay@gmx.at Pilihan

Anda dapat memilih sebagian gelombang dengan tetikus. Saat nanti Anda tekan Main, itu akan memainkan pilihan saja. Saat sudah selesai dan Anda tekan Main lagi, itu akan mengulangi pilihan sekali lagi.

Pada mode pilihan, Anda tidak dapat mengeluarkan pilihan lagi hingga Anda menghilangkan pilihan.

Pilihan dapat dibuat dengan tetikus (atau perangkat pointer) dengan klik kiri, menahan tombol tetikus dan menyeret pointer. Jika Anda klik dengan tombol Shift ditekan, pilihan yang sudah terpilih akan dilebarkan ke titik tersebut.

Untuk menghilangkan pilihan klik sekali dengan tombol kiri ke dalam gelombang. Jika gelombang dapat fokus dari papan ketik, Anda dapat menekan Escape.

 parlatype-1.5.4/help/id/first-steps.page0000644000175000017500000000456513204122230015107 00000000000000 Langkah pertama dengan Parlatype Gabor Karsay gabor.karsay@gmx.at Langkah pertama dengan Parlatype

Parlatype adalah pemutar audio yang mudah digunakan untuk membantu Anda mentranskrip atau mencatat pembicaraan yang terekam. Anda perlu menjalankan sebuah pemroses kata, seperti. LibreOffice, juga. Jalankan Parlatype dan buka sebuah berkas audio dengan klik pada tombol Open di pojok kiri atas.

Anda juga dapat menyeret dan menjatuhkan sebuah berkas pada Parlatype atau buka berkas yang terakhir digunakan di menu Aplikasi.

Sekarang di pojok kiri atas ada sebuah tombol Play yang merupakan peralihan antara main dan jeda. Kapanpun Anda melakukan jeda, Parlatype memutar ke belakang beberapa detik untuk memudahkan kembali. Ini dapat diubah di .

Tombol Jump back dan Jump forward di pojok kiri bawah melewati beberapa detik ke belakang atau ke depan. Jumlah waktu dapat diubah di .

Tampilan akan scroll otomatis sehingga kursor akan selalu terlihat. Anda dapat scroll manual dengan klik atau seret pada bilah scroll atau menggunakan tombol standar. Scroll otomatis akan dihentikan.

Untuk kembali ke posisi kursor dan biarkan tampilan scroll secara otomatis lagi, Klik pada tombol Pergi ke di samping label waktu. Klik pada tombol Main juga mengaktifkan scroll otomatis.

Klik pada tampilan dengan tombol kanan tetikus akan meletakkan kursor ke sana, juga menahan tombol kanan tetikus tertekan dan memindahnya. Tombol kiri tetikus untuk .

Skala kecepatan di samping tombol volume pada pojok kanan bawah mengizinkan Anda untuk mengatur kecepatan main. Nilai 1 berarti kecepatan normal, semua yang lebih rendah (hingga 0.5) adalah lebih lambat, semua yang lebih tinggi adalah lebih cepat.

 parlatype-1.5.4/help/id/keyboard-shortcuts.page0000644000175000017500000000414513204122230016452 00000000000000 Pintasan papan ketik standar pada Parlatype Gabor Karsay gabor.karsay@gmx.at Pintasan papan ketik

Pintasan papan ketik untuk kendali Parlatype, seperti Main, dideskripsikan di . Tombol pintasan untuk jendela terdaftar di bawah ini.

Tombol pintasan standar

Untuk Melakukan Ini

Tekan Ini

Tampilkan bantuan

F1

Buka berkas

Ctrlo

Buka berkas terakhir

Ctrlr

Pergi ke …

Ctrlg

Salin informasi waktu

Ctrlc

Masukkan informasi waktu

Ctrlv

Zoom in

Ctrl+

Zoom out

Ctrl-

Keluar

Ctrlq
parlatype-1.5.4/help/id/libreoffice-helpers.page0000644000175000017500000000660413204122230016531 00000000000000 Gunakan Parlatype dengan LibreOffice Gabor Karsay gabor.karsay@gmx.at Bantuan LibreOffice

Bantuan LibreOffice mengizinkan Anda mengendalikan Parlatype dari LibreOffice. Misalnya, Anda dapat dengan mudah melompat ke informasi waktu.

Untuk mengunakannya, Anda harus memasang pintasan papan ketik di LibreOffice sendiri. Untuk melakukannya, buka LibreOffice, pergi ke menu Perkakas dan pilih Kustomasi.

Pergi ke tab Papan ketik. di bagian bawah, Fungsi, ada daftar yang disebut Kategori. Di akhir daftar tersebut Anda akan menemukan entri Makro LibreOffice. Ada subkategori berbagi yang memiliki subkategori Parlatype. Setelah memilih Parlatype akan ada daftar fungsi di Fungsi. Pilih fungsi yang akan Anda gunakan, Pilih dari daftar Tombol pintasan di atas pintasan dan klik pada tombol Modifikasi.

Anda dapat memilih fungsi yang mana saja:

Bantuan LibreOffice

Nama penolong

Apa yang dilakukan

PlayPause

Beralih antara main dan jeda. Tergantung pada preferensi yang Anda tentukan di Parlatype akan diputar kembali beberapa detik saat jeda.

JumpBack

Lompat mundur beberapa detik, tergantung preferensi yang Anda tentukan di Parlatype.

JumpForward

Lompat maju beberapa detik, tergantung preferensi yang Anda tentukan di Parlatype.

InsertTimestamp

Masukkan informasi waktu saat ini pada posisi kursor. Itu tidak menimpa pilihan manapun.

InsertTimestampOnNewLine

Sama dengan atas, tapi di baris baru.

GotoTimestamp

Jika kursor ditentukan pada informasi waktu, ia akan lompat ke posisi tersebut. Kursor harus berada di suatu tempat di antara dua tanda nomor (#). Jangan pilih informasi waktu, tinggal letakkan kursor di dalamnya.

IncreaseSpeed

Tambah kecepatan main.

DecreaseSpeed

Kurangi kecepatan main.
parlatype-1.5.4/help/id/preferences.page0000644000175000017500000000500413204122230015112 00000000000000 Bagaimana kustomasi Parlatype Gabor Karsay gabor.karsay@gmx.at Preferensi

Anda dapat menemukan jendela preferensi di Menu Aplikasi (di samping Aktivitas di pojok kiri atas. Ada tiga tab: Gelombang, Kendali dan Jendela.

Gelombang

Resolusi: Resolusi gambar gelombang pada satuan pixel per detik, seperti. resoluysi default 100 berarti, bahwa satu detik ditampilkan dalam lebar 100 pixel.

Kursor tetap vs. bergerak: Ada dua mode, bagaimana mengikuti kursor. Pada sistem yang lebih lambat kursor yang bergerak mungkin lebih halus.

Tampilkan skala waktu: Nyalakan atau matikan skala waktu.
Kendali

Lompat mundur saat jeda: Parlatype akan memutar kembali beberapa detik pada tiap jeda, dengan ini Anda akan dengan mudah kembali mengetik. Tentukan nilai 0 jika Anda tidak menghendakinya.

Lompat mundur: Atur berapa detik untuk melewati saat tombol Lompat mundur ditekan.

Lompat maju: Atur berapa detik untuk melewati saat tombol Lompat maju ditekan.
Jendela

Remember size: On start-up Parlatype sets the window size to the size it had the last time.

Remember position: On start-up Parlatype can position its window where you had it when you closed Parlatype last time.

Mulai di atas: Ini akan meletakkan Parlatype saat start-up di atas jendela lainnya. Ini mungkin berguna saat Anda bekerja dengan pengolah kata yang termaksimalkan dan tetap ingin melihat jendela Parlatype.

Remember position and Start on top are not available on Wayland.
parlatype-1.5.4/help/id/id.po0000644000175000017500000007775313176574164012764 00000000000000# Indonesian translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Ari Setyo Wibowo , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-01-26 22:49+0100\n" "PO-Revision-Date: 2017-02-09 07:45+0000\n" "Last-Translator: Ari Setyo Wibowo \n" "Language-Team: Indonesian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-03-13 15:08+0000\n" "X-Generator: Launchpad (build 18331)\n" #. Put one translator per line, in the form NAME , YEAR1, YEAR2 msgctxt "_" msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Ari Setyo Wibowo https://launchpad.net/~ari-el-uno" #. (itstool) path: info/title #: C/index.page:7 msgctxt "text" msgid "Parlatype" msgstr "Parlatype" #. (itstool) path: info/title #: C/index.page:8 msgctxt "link" msgid "Parlatype" msgstr "Parlatype" #. (itstool) path: credit/name #: C/index.page:10 #: C/drag-and-drop.page:8 #: C/first-steps.page:8 #: C/keyboard-shortcuts.page:8 #: C/libreoffice-helpers.page:9 #: C/media-keys.page:8 #: C/preferences.page:8 #: C/selections.page:8 #: C/timestamps.page:8 msgid "Gabor Karsay" msgstr "Gabor Karsay" #. (itstool) path: info/desc #. (itstool) path: page/p #: C/index.page:14 #: C/index.page:23 msgid "" "Parlatype is an easy to use media player. Its main purpose is to " "help you transcribing speech." msgstr "" "Parlatype adalah pemutar media yang mudah digunakan. Tujuan " "utamanya untuk membantu Anda mentranskrip pembicaraan." #. (itstool) path: page/title #: C/index.page:18 msgid "<_:media-1/> Parlatype" msgstr "<_:media-1/> Parlatype" #. (itstool) path: page/p #: C/index.page:24 msgid "" "For a quick overview have a look at . Other " "topics are covered below." msgstr "" "Untuk tinjauan ringkasnya silakan menuju . Topik " "lainnya terdapat di bawah." #. (itstool) path: section/title #: C/index.page:27 msgid "Help topics" msgstr "Topik bantuan" #. (itstool) path: info/desc #: C/drag-and-drop.page:6 msgid "Drop files, file names or timestamps on Parlatype" msgstr "Jatuhkan berkas, nama berkas atau informasi waktu pada Parlatype" #. (itstool) path: page/title #: C/drag-and-drop.page:14 msgid "Drag and Drop" msgstr "Seret dan Jatuhkan" #. (itstool) path: page/p #: C/drag-and-drop.page:16 msgid "" "You can drop files, file names or timestamps on Parlatype's " "window." msgstr "" "Anda dapat menjatuhkan berkas, nama berkas atau informasi waktu pada jendela " "Parlatype." #. (itstool) path: item/p #: C/drag-and-drop.page:19 msgid "" "Files: Drag and drop a file from a file manager, e.g. Files, on " "Parlatype and it will open that file." msgstr "" "Berkas: Seret dan jatuhkan sebuah berkas dari sebuah pengatur berkas, e.g. " "Files, pada Parlatype dan ia akan membuka berkas " "tersebut." #. (itstool) path: item/p #: C/drag-and-drop.page:20 msgid "" "File names: Select a file name from a word processor, e.g. " "LibreOffice, drop the selected text on Parlatype and " "it will open that file. This will always work if the selection contains a " "full path. If you select the name only, Parlatype will look up " "its full path in the list of recent files and open it if it can find it in " "that list." msgstr "" "Nama berkas: Pilih sebuah nama berkas dari suatu pemroses kata, seperti. " "LibreOffice, jatuhkan teks terpilih pada Parlatype dan " "ia akan membuka berkas tersebut. Ini akan selalu bekerja jika pilihan " "mengandung alamat penuh. Jika Anda hanya memilih nama saja, " "Parlatype akan mencari alamat penuh dalam daftar berkas terakhir " "dan akan membukanya jika tidak menemukan dari daftar." #. (itstool) path: item/p #: C/drag-and-drop.page:21 msgid "" "Timestamps: You can drag and drop timestamps in both directions. Select a " "timestamp from a word processor, e.g. LibreOffice, drop the " "selected text on Parlatype and it will jump to that position. Or " "you click on Parlatype's time label and drag it to a word " "processor to insert it there." msgstr "" "Informasi waktu: Anda dapat menyeret dan menjatuhkan informasi waktu di " "kedua arah. Pilih sebuah informasi waktu dari suatu pemroses kata, seperti. " "LibreOffice, jaruhkan teks terpilih pada Parlatype dan " "ia akan melompat ke posisi tersebut. Atau Anda klik pada label waktu " "Parlatype dan seret ke suatu pemroses kata untuk memasukkan ke " "sana." #. (itstool) path: info/desc #. (itstool) path: page/title #: C/first-steps.page:6 #: C/first-steps.page:14 msgid "First steps with Parlatype" msgstr "Langkah pertama dengan Parlatype" #. (itstool) path: page/p #: C/first-steps.page:16 msgid "" "Parlatype is an easy to use audio player to help you transcribing " "or annotating recorded speech. You need to run a word processor, e.g. " "LibreOffice, too. Launch Parlatype and open an audio " "file by clicking on the Open button in the upper left corner." msgstr "" "Parlatype adalah pemutar audio yang mudah digunakan untuk " "membantu Anda mentranskrip atau mencatat pembicaraan yang terekam. Anda " "perlu menjalankan sebuah pemroses kata, seperti. LibreOffice, " "juga. Jalankan Parlatype dan buka sebuah berkas audio dengan klik " "pada tombol Open di pojok kiri atas." #. (itstool) path: note/p #: C/first-steps.page:19 msgid "" "You can also drag and drop a file on Parlatype or open the " "recently used files in the Application menu." msgstr "" "Anda juga dapat menyeret dan menjatuhkan sebuah berkas pada " "Parlatype atau buka berkas yang terakhir digunakan di menu " "Aplikasi." #. (itstool) path: page/p #: C/first-steps.page:22 msgid "" "Now in the upper left corner there is a Play button which toggles " "between play and pause. Whenever you pause, Parlatype rewinds a " "few seconds to make it easier to resume. This can be changed in the ." msgstr "" "Sekarang di pojok kiri atas ada sebuah tombol Play yang merupakan " "peralihan antara main dan jeda. Kapanpun Anda melakukan jeda, " "Parlatype memutar ke belakang beberapa detik untuk memudahkan " "kembali. Ini dapat diubah di ." #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/first-steps.page:24 msgctxt "_" msgid "" "external ref='figures/parlatype-main-window.png' " "md5='1e21a2ddc61fda06238b6b1537191cb3'" msgstr "" "external ref='figures/parlatype-main-window.png' " "md5='1e21a2ddc61fda06238b6b1537191cb3'" #. (itstool) path: page/p #: C/first-steps.page:26 msgid "" "The buttons Jump back and Jump forward in the lower " "left corner skip a few seconds back or ahead. The amount of time can be " "changed in the ." msgstr "" "Tombol Jump back dan Jump forward di pojok kiri bawah " "melewati beberapa detik ke belakang atau ke depan. Jumlah waktu dapat diubah " "di ." #. (itstool) path: page/p #: C/first-steps.page:28 msgid "" "The view scrolls automatically so that the cursor is always visible. You can " "scroll manually by clicking on or dragging the scroll bar or using the " "standard keybindings. Automatic scrolling is stopped then." msgstr "" "Tampilan akan scroll otomatis sehingga kursor akan selalu terlihat. Anda " "dapat scroll manual dengan klik atau seret pada bilah scroll atau " "menggunakan tombol standar. Scroll otomatis akan dihentikan." #. (itstool) path: page/p #: C/first-steps.page:30 msgid "" "To get back to the cursor's position and let the view scroll automatically " "again, click on the Go to button next to the time label. Clicking " "on the Play button also turns automatic scrolling on." msgstr "" "Untuk kembali ke posisi kursor dan biarkan tampilan scroll secara otomatis " "lagi, Klik pada tombol Pergi ke di samping label waktu. Klik pada " "tombol Main juga mengaktifkan scroll otomatis." #. (itstool) path: page/p #: C/first-steps.page:32 msgid "" "Clicking in the view with the right mouse button will put the cursor there, " "also holding the right mouse button pressed and moving it. The left mouse " "button is for ." msgstr "" "Klik pada tampilan dengan tombol kanan tetikus akan meletakkan kursor ke " "sana, juga menahan tombol kanan tetikus tertekan dan memindahnya. Tombol " "kiri tetikus untuk ." #. (itstool) path: page/p #: C/first-steps.page:34 msgid "" "The speed scale next to the volume button in the lower " "right corner lets you adjust the speed of playback. A value of 1 means " "normal speed, everything lower (down to 0.5) is slower, everything above is " "faster." msgstr "" "Skala kecepatan di samping tombol volume pada pojok " "kanan bawah mengizinkan Anda untuk mengatur kecepatan main. Nilai 1 berarti " "kecepatan normal, semua yang lebih rendah (hingga 0.5) adalah lebih lambat, " "semua yang lebih tinggi adalah lebih cepat." #. (itstool) path: info/desc #: C/keyboard-shortcuts.page:6 msgid "Standard keyboard shortcuts in Parlatype" msgstr "Pintasan papan ketik standar pada Parlatype" #. (itstool) path: page/title #: C/keyboard-shortcuts.page:14 msgid "Keyboard shortcuts" msgstr "Pintasan papan ketik" #. (itstool) path: page/p #: C/keyboard-shortcuts.page:16 msgid "" "Keyboard shortcuts for Parlatype control, like Play, " "are described in . Shortcut keys for the window are " "listed below." msgstr "" "Pintasan papan ketik untuk kendali Parlatype, seperti " "Main, dideskripsikan di . Tombol pintasan " "untuk jendela terdaftar di bawah ini." #. (itstool) path: table/title #: C/keyboard-shortcuts.page:19 msgid "Standard Shortcut keys" msgstr "Tombol pintasan standar" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:22 msgid "To Do This" msgstr "Untuk Melakukan Ini" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:23 msgid "Press This" msgstr "Tekan Ini" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:28 msgid "Show help" msgstr "Tampilkan bantuan" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:29 msgid "F1" msgstr "F1" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:32 msgid "Open file" msgstr "Buka berkas" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:33 msgid "Ctrlo" msgstr "Ctrlo" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:36 msgid "Open recent files" msgstr "Buka berkas terakhir" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:37 msgid "Ctrlr" msgstr "Ctrlr" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:40 msgid "Go to …" msgstr "Pergi ke …" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:41 msgid "Ctrlg" msgstr "Ctrlg" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:44 msgid "Copy timestamp" msgstr "Salin informasi waktu" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:45 msgid "Ctrlc" msgstr "Ctrlc" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:48 msgid "Insert timestamp" msgstr "Masukkan informasi waktu" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:49 msgid "Ctrlv" msgstr "Ctrlv" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:52 msgid "Quit" msgstr "Keluar" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:53 msgid "Ctrlq" msgstr "Ctrlq" #. (itstool) path: p/link #: C/legal.xml:5 msgid "Creative Commons Attribution-ShareAlike 4.0 International" msgstr "Creative Commons Attribution-ShareAlike 4.0 Internasional" #. (itstool) path: license/p #: C/legal.xml:4 msgid "This work is licensed under a <_:link-1/> license." msgstr "Pekerjaan ini dilisensikan di bawah lisensi <_:link-1/>." #. (itstool) path: info/desc #: C/libreoffice-helpers.page:7 msgid "Use Parlatype with LibreOffice" msgstr "Gunakan Parlatype dengan LibreOffice" #. (itstool) path: page/title #. (itstool) path: table/title #: C/libreoffice-helpers.page:15 #: C/libreoffice-helpers.page:30 msgid "LibreOffice Helpers" msgstr "Bantuan LibreOffice" #. (itstool) path: page/p #: C/libreoffice-helpers.page:17 msgid "" "LibreOffice Helpers let you control Parlatype from " "LibreOffice. For example, you can jump easily to timestamps." msgstr "" "Bantuan LibreOffice mengizinkan Anda mengendalikan Parlatype dari " "LibreOffice. Misalnya, Anda dapat dengan mudah melompat ke " "informasi waktu." #. (itstool) path: page/p #: C/libreoffice-helpers.page:19 msgid "" "To use them, you have to assign keyboard shortcuts in LibreOffice " "itself. To do this, open LibreOffice, go to menu Tools " "and select Customize." msgstr "" "Untuk mengunakannya, Anda harus memasang pintasan papan ketik di " "LibreOffice sendiri. Untuk melakukannya, buka " "LibreOffice, pergi ke menu Perkakas dan pilih " "Kustomasi." #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/libreoffice-helpers.page:21 msgctxt "_" msgid "" "external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" msgstr "" "external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" #. (itstool) path: page/p #: C/libreoffice-helpers.page:23 msgid "" "Go to tab Keyboard. In the lower part, Functions, " "there is a list called Category. At the end of that list you'll " "find the entry LibreOffice Macros. There is a subcategory " "share which has a subcategory Parlatype. After " "selecting Parlatype there will be a list of functions in the " "Functions list. Choose the function you'd like to use, select " "from the list Shortcut keys above a shortcut and click on the " "button Modify." msgstr "" "Pergi ke tab Papan ketik. di bagian bawah, Fungsi, ada " "daftar yang disebut Kategori. Di akhir daftar tersebut Anda akan " "menemukan entri Makro LibreOffice. Ada subkategori " "berbagi yang memiliki subkategori Parlatype. Setelah " "memilih Parlatype akan ada daftar fungsi di Fungsi. " "Pilih fungsi yang akan Anda gunakan, Pilih dari daftar Tombol " "pintasan di atas pintasan dan klik pada tombol Modifikasi." #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/libreoffice-helpers.page:25 msgctxt "_" msgid "" "external ref='figures/lo-customize.png' " "md5='081564921275129bee7bbd10220547e7'" msgstr "" "external ref='figures/lo-customize.png' " "md5='081564921275129bee7bbd10220547e7'" #. (itstool) path: page/p #: C/libreoffice-helpers.page:27 msgid "You can select any of these functions:" msgstr "Anda dapat memilih fungsi yang mana saja:" #. (itstool) path: td/p #: C/libreoffice-helpers.page:33 msgid "Helper's name" msgstr "Nama penolong" #. (itstool) path: td/p #: C/libreoffice-helpers.page:34 msgid "What it does" msgstr "Apa yang dilakukan" #. (itstool) path: td/p #: C/libreoffice-helpers.page:40 msgid "" "Toggles between play and pause. Depending on your preferences set in " "Parlatype it will rewind a few seconds on pause." msgstr "" "Beralih antara main dan jeda. Tergantung pada preferensi yang Anda tentukan " "di Parlatype akan diputar kembali beberapa detik saat jeda." #. (itstool) path: td/p #: C/libreoffice-helpers.page:44 msgid "" "Jumps back a few seconds, depending on the preferences you set in " "Parlatype." msgstr "" "Lompat mundur beberapa detik, tergantung preferensi yang Anda tentukan di " "Parlatype." #. (itstool) path: td/p #: C/libreoffice-helpers.page:48 msgid "" "Jumps forward a few seconds, depending on the preferences you set in " "Parlatype." msgstr "" "Lompat maju beberapa detik, tergantung preferensi yang Anda tentukan di " "Parlatype." #. (itstool) path: td/p #: C/libreoffice-helpers.page:52 msgid "" "Inserts the current timestamp at the cursor's position. It does not " "overwrite any selection." msgstr "" "Masukkan informasi waktu saat ini pada posisi kursor. Itu tidak menimpa " "pilihan manapun." #. (itstool) path: td/p #: C/libreoffice-helpers.page:56 msgid "The same as above, but on a new line." msgstr "Sama dengan atas, tapi di baris baru." #. (itstool) path: td/p #: C/libreoffice-helpers.page:60 msgid "" "If the cursor is set on a timestamp, it will jump to that position. The " "cursor has to be somewhere between the two number signs (#). Don't select " "the timestamp, just put the cursor inside." msgstr "" "Jika kursor ditentukan pada informasi waktu, ia akan lompat ke posisi " "tersebut. Kursor harus berada di suatu tempat di antara dua tanda nomor (#). " "Jangan pilih informasi waktu, tinggal letakkan kursor di dalamnya." #. (itstool) path: td/p #: C/libreoffice-helpers.page:64 msgid "Increases playback speed." msgstr "Tambah kecepatan main." #. (itstool) path: td/p #: C/libreoffice-helpers.page:68 msgid "Decreases playback speed." msgstr "Kurangi kecepatan main." #. (itstool) path: info/desc #: C/media-keys.page:6 msgid "How to control Parlatype with media keys" msgstr "Bagaimana mengendalikan Parlatype dengan tombol media" #. (itstool) path: page/title #: C/media-keys.page:14 msgid "Media keys" msgstr "Tombol media" #. (itstool) path: page/p #: C/media-keys.page:16 msgid "" "Parlatype's basic functions can be controlled with so called " "media keys. Media keys are used system wide to control media " "players and they are working even if the media player is not in focus or in " "the background." msgstr "" "Fungsi dasar Parlatype dapat dikendalikan dengan tombol " "media. Tombol media digunakan sistem untuk mengendalikan pemutar media " "dan bekerja bahkan jika pemutar media sedang tidak fokus atau jalan di latar " "belakang." #. (itstool) path: page/p #: C/media-keys.page:18 msgid "" "You can change the media keys in GNOME settings. You can use dedicated keys " "from a multimedia keyboard or use any other key or combination of keys." msgstr "" "Anda dapat mengganti tombol media di pengaturan GNOME. Anda dapat " "menggunakan tombol terdedikasi dari papan ketik multimedia atau menggunakan " "tombol lain atau kombinasi tombol." #. (itstool) path: note/p #: C/media-keys.page:21 msgid "" "This will affect other media players, e.g. Totem or " "Rhythmbox, as well." msgstr "" "Ini akan memengaruhi pemutar media lainnya, seperti. Totem atau " "Rhythmbox, juga." #. (itstool) path: page/p #: C/media-keys.page:24 msgid "Parlatype listens to these key strokes:" msgstr "Parlatype menyimak ketukan tombol ini:" #. (itstool) path: item/p #: C/media-keys.page:26 msgid "" "Play, Pause, Stop: Each of these keys " "toggles between playing and pause." msgstr "" "Main, Jeda, Henti: Tiap tombol beralih " "antara main dan jeda." #. (itstool) path: item/p #: C/media-keys.page:27 msgid "" "Rewind, Previous: Each of these keys will jump back " "the time you selected in Preferences." msgstr "" "Putar-kembali, Sebelumnya: Tiap tombol akan lompat " "mundur pada waktu yang Anda pilih di Preferensi." #. (itstool) path: item/p #: C/media-keys.page:28 msgid "" "Fast Forward, Next: Each of these keys will jump ahead " "the time you selected in Preferences." msgstr "" "Maju Cepat, Berikutnya: Tiap tombol akan lompat maju " "pada waktu yang Anda pilih di Preferensi." #. (itstool) path: note/p #: C/media-keys.page:32 msgid "" "For detailed instructions how to change keyboard shortcuts in GNOME see the " "official " "documentation." msgstr "" "Untuk instruksi terperinci bagaimana mengganti pintasan papan ketik di GNOME " "lihat pada dokumentasi " "resmi." #. (itstool) path: page/p #: C/media-keys.page:35 msgid "" "If you are using a dedicated foot pedal, it should be possible to map the " "foot pedal signals to any of the keys. This is not well tested, however. Any " "feedback regarding foot pedals is welcome." msgstr "" "Jika Anda menggunakan pedal kaki terdedikasi, itu memungkinkan untuk " "memetakan sinyal pedal kaki ke tombol apa saja. Namun, ini belum teruji " "dengan baik. Semua umpan balik tentang pedal kaki sangat diterima." #. (itstool) path: info/desc #: C/preferences.page:6 msgid "How to customize Parlatype" msgstr "Bagaimana kustomasi Parlatype" #. (itstool) path: page/title #: C/preferences.page:14 msgid "Preferences" msgstr "Preferensi" #. (itstool) path: page/p #: C/preferences.page:16 msgid "" "You can reach the preferences window in the Application Menu (next to " "Activities in the top left corner. There are three tabs: " "Waveform, Controls and Window." msgstr "" "Anda dapat menemukan jendela preferensi di Menu Aplikasi (di samping " "Aktivitas di pojok kiri atas. Ada tiga tab: Gelombang, " "Kendali dan Jendela." #. (itstool) path: section/title #: C/preferences.page:19 msgid "Waveform" msgstr "Gelombang" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:21 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-waveform.png' " "md5='e9d05960162dcdddab10378e21ce63da'" msgstr "" "external ref='figures/parlatype-prefs-waveform.png' " "md5='e9d05960162dcdddab10378e21ce63da'" #. (itstool) path: item/p #: C/preferences.page:24 msgid "" "Resolution: The resolution of the waveform image is given in pixels per " "second, e.g. the default resolution of 100 means, that one second is shown " "with a width of 100 pixels." msgstr "" "Resolusi: Resolusi gambar gelombang pada satuan pixel per detik, seperti. " "resoluysi default 100 berarti, bahwa satu detik ditampilkan dalam lebar 100 " "pixel." #. (itstool) path: item/p #: C/preferences.page:25 msgid "" "Fixed vs. moving cursor: There are two modes, how to follow the cursor. On " "slower systems a moving cursor might be smoother." msgstr "" "Kursor tetap vs. bergerak: Ada dua mode, bagaimana mengikuti kursor. Pada " "sistem yang lebih lambat kursor yang bergerak mungkin lebih halus." #. (itstool) path: item/p #: C/preferences.page:26 msgid "Show time scale: Turn the time scale on or off." msgstr "Tampilkan skala waktu: Nyalakan atau matikan skala waktu." #. (itstool) path: section/title #: C/preferences.page:31 msgid "Controls" msgstr "Kendali" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:33 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-controls.png' " "md5='0b50614222d881110b176c2e28b7d18c'" msgstr "" "external ref='figures/parlatype-prefs-controls.png' " "md5='0b50614222d881110b176c2e28b7d18c'" #. (itstool) path: item/p #: C/preferences.page:36 msgid "" "Jump back on pause: Parlatype will rewind a few seconds on each " "pause, this way you can easier resume typing. Set this value to 0 if you " "don't want this behaviour." msgstr "" "Lompat mundur saat jeda: Parlatype akan memutar kembali beberapa " "detik pada tiap jeda, dengan ini Anda akan dengan mudah kembali mengetik. " "Tentukan nilai 0 jika Anda tidak menghendakinya." #. (itstool) path: item/p #: C/preferences.page:37 msgid "" "Jump back: Configures how many seconds to skip when the Jump back " "button is pressed." msgstr "" "Lompat mundur: Atur berapa detik untuk melewati saat tombol Lompat " "mundur ditekan." #. (itstool) path: item/p #: C/preferences.page:38 msgid "" "Jump forward: Configures how many seconds to skip when the Jump " "forward button is pressed." msgstr "" "Lompat maju: Atur berapa detik untuk melewati saat tombol Lompat " "maju ditekan." #. (itstool) path: section/title #: C/preferences.page:43 msgid "Window" msgstr "Jendela" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:45 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-window.png' " "md5='615d876529cdd45763e78a3ee01b7b3e'" msgstr "" "external ref='figures/parlatype-prefs-window.png' " "md5='615d876529cdd45763e78a3ee01b7b3e'" #. (itstool) path: item/p #: C/preferences.page:48 msgid "" "Remember position: On start-up Parlatype can position its window " "where you had it when you closed Parlatype last time. This also " "remembers the window's size." msgstr "" "Ingat posisi: Saat start-up Parlatype dapat memosisikan " "jendelanya dimana Anda menutup Parlatype terakhir kali. Ini juga " "mengingat ukuran jendela." #. (itstool) path: item/p #: C/preferences.page:49 msgid "" "Start on top: This will put Parlatype on start-up on top of other " "windows. This might be useful if you are working with a maximized word " "processor and still want to see the Parlatype window." msgstr "" "Mulai di atas: Ini akan meletakkan Parlatype saat start-up di " "atas jendela lainnya. Ini mungkin berguna saat Anda bekerja dengan pengolah " "kata yang termaksimalkan dan tetap ingin melihat jendela " "Parlatype." #. (itstool) path: info/desc #: C/selections.page:6 msgid "How to play and repeat a selection" msgstr "Bagaimana memainkan dan mengulangi pilihan" #. (itstool) path: page/title #: C/selections.page:14 msgid "Selections" msgstr "Pilihan" #. (itstool) path: page/p #: C/selections.page:16 msgid "" "You can select a piece of the waveform with the mouse. Next time you press " "Play, it will play the selection only. When it is finished and " "you press Play again, it will loop the selection once." msgstr "" "Anda dapat memilih sebagian gelombang dengan tetikus. Saat nanti Anda tekan " "Main, itu akan memainkan pilihan saja. Saat sudah selesai dan " "Anda tekan Main lagi, itu akan mengulangi pilihan sekali lagi." #. (itstool) path: note/p #: C/selections.page:18 msgid "" "When in selection mode, you can not exit the selection anymore until you " "deselect it." msgstr "" "Pada mode pilihan, Anda tidak dapat mengeluarkan pilihan lagi hingga Anda " "menghilangkan pilihan." #. (itstool) path: page/p #: C/selections.page:20 msgid "" "Selections can be made with the mouse (or pointer device) with a left click, " "holding the mouse button and dragging the pointer. If you click with " "Shift key pressed, an already existing selection will be enlarged " "to that point." msgstr "" "Pilihan dapat dibuat dengan tetikus (atau perangkat pointer) dengan klik " "kiri, menahan tombol tetikus dan menyeret pointer. Jika Anda klik dengan " "tombol Shift ditekan, pilihan yang sudah terpilih akan dilebarkan " "ke titik tersebut." #. (itstool) path: page/p #: C/selections.page:22 msgid "" "To deselect click once with the left button into the waveform. If the " "waveform has keyboard focus, you can press Escape." msgstr "" "Untuk menghilangkan pilihan klik sekali dengan tombol kiri ke dalam " "gelombang. Jika gelombang dapat fokus dari papan ketik, Anda dapat menekan " "Escape." #. (itstool) path: info/desc #: C/timestamps.page:6 msgid "Set and go to timestamps" msgstr "Tentukan dan pergi ke informasi waktu" #. (itstool) path: page/title #: C/timestamps.page:14 msgid "Timestamps" msgstr "Informasi waktu" #. (itstool) path: page/p #: C/timestamps.page:16 msgid "Timestamps help you to navigate in your transcription." msgstr "Informasi waktu membantu Anda untuk menavigasi transkripsi Anda." #. (itstool) path: note/p #: C/timestamps.page:19 msgid "" "Timestamps look like this: #03:45.2#. You can select them with or without " "the number signs." msgstr "" "Informasi waktu terlihat seperti ini: #03:45.2#. Anda dapat memilihnya " "dengan atau tanpa tanda nomor." #. (itstool) path: section/title #: C/timestamps.page:23 msgid "Drag and drop" msgstr "Seret dan jatuhkan" #. (itstool) path: section/p #: C/timestamps.page:25 msgid "" "If you select the timestamp in the word processor, you can drag and drop it " "on the Parlatype window and it will go to that position. This is " "also possible the other way round: Drag the time label from " "Parlatype to a word processor and drop it there to insert it." msgstr "" "Jika Anda memilih informasi waktu di pengolah kata, Anda dapat menyeret dan " "menjatuhkannya pada jendela Parlatype dan ia akan pergi ke posisi " "tersebut. Ini juga mungkin cara lainnya: Seret label waktu dari " "Parlatype ke pengolah kata dan jatuhkan ke sana untuk " "memasukkannya." #. (itstool) path: section/title #: C/timestamps.page:29 msgid "Using the clipboard" msgstr "Menggunakan papan salinan" #. (itstool) path: section/p #: C/timestamps.page:31 msgid "" "First make sure, the Parlatype window has focus. With the key " "sequence Ctrlc the current timestamp " "is copied to the clipboard. Changing to the word processor you can insert " "now the timestamp in your transcription." msgstr "" "Pertama yakinkan, jendela Parlatype mendapat fokus. Dengan urutan " "tombol Ctrlc informasi waktu saat ini " "disalin ke papan salinan. Beralih ke pengolah kata Anda dapat memasukkan " "informasi waktu pada transkripsi Anda." #. (itstool) path: section/p #: C/timestamps.page:32 msgid "" "To go to a timestamp position, copy the timestamp in the word processor to " "the clipboard. Once you have changed focus to Parlatype press " "Ctrlv." msgstr "" "Untuk pergi ke posisi informasi waktu, salin informasi waktu di pengolah " "kata ke papan salinan. Setelah Anda berpindah fokus ke Parlatype " "tekan Ctrlv." parlatype-1.5.4/help/id/index.page0000644000175000017500000000201013204122230013712 00000000000000 Parlatype Parlatype Gabor Karsay gabor.karsay@gmx.at Parlatype adalah pemutar media yang mudah digunakan. Tujuan utamanya untuk membantu Anda mentranskrip pembicaraan. <media type="image" mime="image/png" src="figures/parlatype-icon.png" its:translate="no"/> Parlatype

Parlatype adalah pemutar media yang mudah digunakan. Tujuan utamanya untuk membantu Anda mentranskrip pembicaraan.

Untuk tinjauan ringkasnya silakan menuju . Topik lainnya terdapat di bawah.

Topik bantuan
parlatype-1.5.4/help/id/drag-and-drop.page0000644000175000017500000000311413204122230015230 00000000000000 Jatuhkan berkas, nama berkas atau informasi waktu pada Parlatype Gabor Karsay gabor.karsay@gmx.at Seret dan Jatuhkan

Anda dapat menjatuhkan berkas, nama berkas atau informasi waktu pada jendela Parlatype.

Berkas: Seret dan jatuhkan sebuah berkas dari sebuah pengatur berkas, e.g. Files, pada Parlatype dan ia akan membuka berkas tersebut.

Nama berkas: Pilih sebuah nama berkas dari suatu pemroses kata, seperti. LibreOffice, jatuhkan teks terpilih pada Parlatype dan ia akan membuka berkas tersebut. Ini akan selalu bekerja jika pilihan mengandung alamat penuh. Jika Anda hanya memilih nama saja, Parlatype akan mencari alamat penuh dalam daftar berkas terakhir dan akan membukanya jika tidak menemukan dari daftar.

Informasi waktu: Anda dapat menyeret dan menjatuhkan informasi waktu di kedua arah. Pilih sebuah informasi waktu dari suatu pemroses kata, seperti. LibreOffice, jaruhkan teks terpilih pada Parlatype dan ia akan melompat ke posisi tersebut. Atau Anda klik pada label waktu Parlatype dan seret ke suatu pemroses kata untuk memasukkan ke sana.

 parlatype-1.5.4/help/id/media-keys.page0000644000175000017500000000354013204122230014644 00000000000000 Bagaimana mengendalikan Parlatype dengan tombol media Gabor Karsay gabor.karsay@gmx.at Tombol media

Fungsi dasar Parlatype dapat dikendalikan dengan tombol media. Tombol media digunakan sistem untuk mengendalikan pemutar media dan bekerja bahkan jika pemutar media sedang tidak fokus atau jalan di latar belakang.

Anda dapat mengganti tombol media di pengaturan GNOME. Anda dapat menggunakan tombol terdedikasi dari papan ketik multimedia atau menggunakan tombol lain atau kombinasi tombol.

Ini akan memengaruhi pemutar media lainnya, seperti. Totem atau Rhythmbox, juga.

Parlatype menyimak ketukan tombol ini:

Main, Jeda, Henti: Tiap tombol beralih antara main dan jeda.

Putar-kembali, Sebelumnya: Tiap tombol akan lompat mundur pada waktu yang Anda pilih di Preferensi.

Maju Cepat, Berikutnya: Tiap tombol akan lompat maju pada waktu yang Anda pilih di Preferensi.

Untuk instruksi terperinci bagaimana mengganti pintasan papan ketik di GNOME lihat pada dokumentasi resmi.

Jika Anda menggunakan pedal kaki terdedikasi, itu memungkinkan untuk memetakan sinyal pedal kaki ke tombol apa saja. Namun, ini belum teruji dengan baik. Semua umpan balik tentang pedal kaki sangat diterima.

 parlatype-1.5.4/help/id/timestamps.page0000644000175000017500000000310613204122230015000 00000000000000 Tentukan dan pergi ke informasi waktu Gabor Karsay gabor.karsay@gmx.at Informasi waktu

Informasi waktu membantu Anda untuk menavigasi transkripsi Anda.

Informasi waktu terlihat seperti ini: #03:45.2#. Anda dapat memilihnya dengan atau tanpa tanda nomor.
Seret dan jatuhkan

Jika Anda memilih informasi waktu di pengolah kata, Anda dapat menyeret dan menjatuhkannya pada jendela Parlatype dan ia akan pergi ke posisi tersebut. Ini juga mungkin cara lainnya: Seret label waktu dari Parlatype ke pengolah kata dan jatuhkan ke sana untuk memasukkannya.

Menggunakan papan salinan

Pertama yakinkan, jendela Parlatype mendapat fokus. Dengan urutan tombol Ctrlc informasi waktu saat ini disalin ke papan salinan. Beralih ke pengolah kata Anda dapat memasukkan informasi waktu pada transkripsi Anda.

Untuk pergi ke posisi informasi waktu, salin informasi waktu di pengolah kata ke papan salinan. Setelah Anda berpindah fokus ke Parlatype tekan Ctrlv.

 parlatype-1.5.4/help/id/legal.xml0000644000175000017500000000051613204122230013564 00000000000000

Pekerjaan ini dilisensikan di bawah lisensi Creative Commons Attribution-ShareAlike 4.0 Internasional.

 parlatype-1.5.4/help/ku/0000755000175000017500000000000013204324054012067 500000000000000parlatype-1.5.4/help/ku/selections.page0000644000175000017500000000221413204122231015005 00000000000000 How to play and repeat a selection Gabor Karsay gabor.karsay@gmx.at Selections

You can select a piece of the waveform with the mouse. Next time you press Play, it will play the selection only. When it is finished and you press Play again, it will loop the selection once.

When in selection mode, you can not exit the selection anymore until you deselect it.

Selections can be made with the mouse (or pointer device) with a left click, holding the mouse button and dragging the pointer. If you click with Shift key pressed, an already existing selection will be enlarged to that point.

To deselect click once with the left button into the waveform. If the waveform has keyboard focus, you can press Escape.

 parlatype-1.5.4/help/ku/first-steps.page0000644000175000017500000000437313204122231015130 00000000000000 First steps with Parlatype Gabor Karsay gabor.karsay@gmx.at First steps with Parlatype

Parlatype is an easy to use audio player to help you transcribing or annotating recorded speech. You need to run a word processor, e.g. LibreOffice, too. Launch Parlatype and open an audio file by clicking on the Open button in the upper left corner.

You can also drag and drop a file on Parlatype or open the recently used files in the Application menu.

Now in the upper left corner there is a Play button which toggles between play and pause. Whenever you pause, Parlatype rewinds a few seconds to make it easier to resume. This can be changed in the .

The buttons Jump back and Jump forward in the lower left corner skip a few seconds back or ahead. The amount of time can be changed in the .

The view scrolls automatically so that the cursor is always visible. You can scroll manually by clicking on or dragging the scroll bar or using the standard keybindings. Automatic scrolling is stopped then.

To get back to the cursor's position and let the view scroll automatically again, click on the Go to button next to the time label. Clicking on the Play button also turns automatic scrolling on.

Clicking in the view with the right mouse button will put the cursor there, also holding the right mouse button pressed and moving it. The left mouse button is for .

The speed scale next to the volume button in the lower right corner lets you adjust the speed of playback. A value of 1 means normal speed, everything lower (down to 0.5) is slower, everything above is faster.

 parlatype-1.5.4/help/ku/ku.po0000644000175000017500000005215513176574164013017 00000000000000# Kurdish translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Rokar ✌ , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-01-26 22:49+0100\n" "PO-Revision-Date: 2017-03-17 21:57+0000\n" "Last-Translator: Rokar ✌ \n" "Language-Team: Kurdish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-03-25 14:24+0000\n" "X-Generator: Launchpad (build 18334)\n" #. Put one translator per line, in the form NAME , YEAR1, YEAR2 msgctxt "_" msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Rokar ✌ https://launchpad.net/~rokarali" #. (itstool) path: info/title #: C/index.page:7 msgctxt "text" msgid "Parlatype" msgstr "Parlatype" #. (itstool) path: info/title #: C/index.page:8 msgctxt "link" msgid "Parlatype" msgstr "Parlatype" #. (itstool) path: credit/name #: C/index.page:10 #: C/drag-and-drop.page:8 #: C/first-steps.page:8 #: C/keyboard-shortcuts.page:8 #: C/libreoffice-helpers.page:9 #: C/media-keys.page:8 #: C/preferences.page:8 #: C/selections.page:8 #: C/timestamps.page:8 msgid "Gabor Karsay" msgstr "Gabor Karsay" #. (itstool) path: info/desc #. (itstool) path: page/p #: C/index.page:14 #: C/index.page:23 msgid "" "Parlatype is an easy to use media player. Its main purpose is to " "help you transcribing speech." msgstr "" #. (itstool) path: page/title #: C/index.page:18 msgid "<_:media-1/> Parlatype" msgstr "" #. (itstool) path: page/p #: C/index.page:24 msgid "" "For a quick overview have a look at . Other " "topics are covered below." msgstr "" #. (itstool) path: section/title #: C/index.page:27 msgid "Help topics" msgstr "" #. (itstool) path: info/desc #: C/drag-and-drop.page:6 msgid "Drop files, file names or timestamps on Parlatype" msgstr "" #. (itstool) path: page/title #: C/drag-and-drop.page:14 msgid "Drag and Drop" msgstr "" #. (itstool) path: page/p #: C/drag-and-drop.page:16 msgid "" "You can drop files, file names or timestamps on Parlatype's " "window." msgstr "" #. (itstool) path: item/p #: C/drag-and-drop.page:19 msgid "" "Files: Drag and drop a file from a file manager, e.g. Files, on " "Parlatype and it will open that file." msgstr "" #. (itstool) path: item/p #: C/drag-and-drop.page:20 msgid "" "File names: Select a file name from a word processor, e.g. " "LibreOffice, drop the selected text on Parlatype and " "it will open that file. This will always work if the selection contains a " "full path. If you select the name only, Parlatype will look up " "its full path in the list of recent files and open it if it can find it in " "that list." msgstr "" #. (itstool) path: item/p #: C/drag-and-drop.page:21 msgid "" "Timestamps: You can drag and drop timestamps in both directions. Select a " "timestamp from a word processor, e.g. LibreOffice, drop the " "selected text on Parlatype and it will jump to that position. Or " "you click on Parlatype's time label and drag it to a word " "processor to insert it there." msgstr "" #. (itstool) path: info/desc #. (itstool) path: page/title #: C/first-steps.page:6 #: C/first-steps.page:14 msgid "First steps with Parlatype" msgstr "" #. (itstool) path: page/p #: C/first-steps.page:16 msgid "" "Parlatype is an easy to use audio player to help you transcribing " "or annotating recorded speech. You need to run a word processor, e.g. " "LibreOffice, too. Launch Parlatype and open an audio " "file by clicking on the Open button in the upper left corner." msgstr "" #. (itstool) path: note/p #: C/first-steps.page:19 msgid "" "You can also drag and drop a file on Parlatype or open the " "recently used files in the Application menu." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:22 msgid "" "Now in the upper left corner there is a Play button which toggles " "between play and pause. Whenever you pause, Parlatype rewinds a " "few seconds to make it easier to resume. This can be changed in the ." msgstr "" #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/first-steps.page:24 msgctxt "_" msgid "" "external ref='figures/parlatype-main-window.png' " "md5='1e21a2ddc61fda06238b6b1537191cb3'" msgstr "" #. (itstool) path: page/p #: C/first-steps.page:26 msgid "" "The buttons Jump back and Jump forward in the lower " "left corner skip a few seconds back or ahead. The amount of time can be " "changed in the ." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:28 msgid "" "The view scrolls automatically so that the cursor is always visible. You can " "scroll manually by clicking on or dragging the scroll bar or using the " "standard keybindings. Automatic scrolling is stopped then." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:30 msgid "" "To get back to the cursor's position and let the view scroll automatically " "again, click on the Go to button next to the time label. Clicking " "on the Play button also turns automatic scrolling on." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:32 msgid "" "Clicking in the view with the right mouse button will put the cursor there, " "also holding the right mouse button pressed and moving it. The left mouse " "button is for ." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:34 msgid "" "The speed scale next to the volume button in the lower " "right corner lets you adjust the speed of playback. A value of 1 means " "normal speed, everything lower (down to 0.5) is slower, everything above is " "faster." msgstr "" #. (itstool) path: info/desc #: C/keyboard-shortcuts.page:6 msgid "Standard keyboard shortcuts in Parlatype" msgstr "" #. (itstool) path: page/title #: C/keyboard-shortcuts.page:14 msgid "Keyboard shortcuts" msgstr "" #. (itstool) path: page/p #: C/keyboard-shortcuts.page:16 msgid "" "Keyboard shortcuts for Parlatype control, like Play, " "are described in . Shortcut keys for the window are " "listed below." msgstr "" #. (itstool) path: table/title #: C/keyboard-shortcuts.page:19 msgid "Standard Shortcut keys" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:22 msgid "To Do This" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:23 msgid "Press This" msgstr "Pêl vê bike" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:28 msgid "Show help" msgstr "Alîkariyê nîşan bide" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:29 msgid "F1" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:32 msgid "Open file" msgstr "Pelgeh veke" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:33 msgid "Ctrlo" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:36 msgid "Open recent files" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:37 msgid "Ctrlr" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:40 msgid "Go to …" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:41 msgid "Ctrlg" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:44 msgid "Copy timestamp" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:45 msgid "Ctrlc" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:48 msgid "Insert timestamp" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:49 msgid "Ctrlv" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:52 msgid "Quit" msgstr "Derkeve" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:53 msgid "Ctrlq" msgstr "" #. (itstool) path: p/link #: C/legal.xml:5 msgid "Creative Commons Attribution-ShareAlike 4.0 International" msgstr "" #. (itstool) path: license/p #: C/legal.xml:4 msgid "This work is licensed under a <_:link-1/> license." msgstr "" #. (itstool) path: info/desc #: C/libreoffice-helpers.page:7 msgid "Use Parlatype with LibreOffice" msgstr "" #. (itstool) path: page/title #. (itstool) path: table/title #: C/libreoffice-helpers.page:15 #: C/libreoffice-helpers.page:30 msgid "LibreOffice Helpers" msgstr "Alîkarîa LibreOffice" #. (itstool) path: page/p #: C/libreoffice-helpers.page:17 msgid "" "LibreOffice Helpers let you control Parlatype from " "LibreOffice. For example, you can jump easily to timestamps." msgstr "" #. (itstool) path: page/p #: C/libreoffice-helpers.page:19 msgid "" "To use them, you have to assign keyboard shortcuts in LibreOffice " "itself. To do this, open LibreOffice, go to menu Tools " "and select Customize." msgstr "" #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/libreoffice-helpers.page:21 msgctxt "_" msgid "" "external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" msgstr "" #. (itstool) path: page/p #: C/libreoffice-helpers.page:23 msgid "" "Go to tab Keyboard. In the lower part, Functions, " "there is a list called Category. At the end of that list you'll " "find the entry LibreOffice Macros. There is a subcategory " "share which has a subcategory Parlatype. After " "selecting Parlatype there will be a list of functions in the " "Functions list. Choose the function you'd like to use, select " "from the list Shortcut keys above a shortcut and click on the " "button Modify." msgstr "" #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/libreoffice-helpers.page:25 msgctxt "_" msgid "" "external ref='figures/lo-customize.png' " "md5='081564921275129bee7bbd10220547e7'" msgstr "" #. (itstool) path: page/p #: C/libreoffice-helpers.page:27 msgid "You can select any of these functions:" msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:33 msgid "Helper's name" msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:34 msgid "What it does" msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:40 msgid "" "Toggles between play and pause. Depending on your preferences set in " "Parlatype it will rewind a few seconds on pause." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:44 msgid "" "Jumps back a few seconds, depending on the preferences you set in " "Parlatype." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:48 msgid "" "Jumps forward a few seconds, depending on the preferences you set in " "Parlatype." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:52 msgid "" "Inserts the current timestamp at the cursor's position. It does not " "overwrite any selection." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:56 msgid "The same as above, but on a new line." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:60 msgid "" "If the cursor is set on a timestamp, it will jump to that position. The " "cursor has to be somewhere between the two number signs (#). Don't select " "the timestamp, just put the cursor inside." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:64 msgid "Increases playback speed." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:68 msgid "Decreases playback speed." msgstr "" #. (itstool) path: info/desc #: C/media-keys.page:6 msgid "How to control Parlatype with media keys" msgstr "" #. (itstool) path: page/title #: C/media-keys.page:14 msgid "Media keys" msgstr "" #. (itstool) path: page/p #: C/media-keys.page:16 msgid "" "Parlatype's basic functions can be controlled with so called " "media keys. Media keys are used system wide to control media " "players and they are working even if the media player is not in focus or in " "the background." msgstr "" #. (itstool) path: page/p #: C/media-keys.page:18 msgid "" "You can change the media keys in GNOME settings. You can use dedicated keys " "from a multimedia keyboard or use any other key or combination of keys." msgstr "" #. (itstool) path: note/p #: C/media-keys.page:21 msgid "" "This will affect other media players, e.g. Totem or " "Rhythmbox, as well." msgstr "" #. (itstool) path: page/p #: C/media-keys.page:24 msgid "Parlatype listens to these key strokes:" msgstr "" #. (itstool) path: item/p #: C/media-keys.page:26 msgid "" "Play, Pause, Stop: Each of these keys " "toggles between playing and pause." msgstr "" #. (itstool) path: item/p #: C/media-keys.page:27 msgid "" "Rewind, Previous: Each of these keys will jump back " "the time you selected in Preferences." msgstr "" #. (itstool) path: item/p #: C/media-keys.page:28 msgid "" "Fast Forward, Next: Each of these keys will jump ahead " "the time you selected in Preferences." msgstr "" #. (itstool) path: note/p #: C/media-keys.page:32 msgid "" "For detailed instructions how to change keyboard shortcuts in GNOME see the " "official " "documentation." msgstr "" #. (itstool) path: page/p #: C/media-keys.page:35 msgid "" "If you are using a dedicated foot pedal, it should be possible to map the " "foot pedal signals to any of the keys. This is not well tested, however. Any " "feedback regarding foot pedals is welcome." msgstr "" #. (itstool) path: info/desc #: C/preferences.page:6 msgid "How to customize Parlatype" msgstr "" #. (itstool) path: page/title #: C/preferences.page:14 msgid "Preferences" msgstr "Vebijêrk" #. (itstool) path: page/p #: C/preferences.page:16 msgid "" "You can reach the preferences window in the Application Menu (next to " "Activities in the top left corner. There are three tabs: " "Waveform, Controls and Window." msgstr "" #. (itstool) path: section/title #: C/preferences.page:19 msgid "Waveform" msgstr "" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:21 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-waveform.png' " "md5='e9d05960162dcdddab10378e21ce63da'" msgstr "" #. (itstool) path: item/p #: C/preferences.page:24 msgid "" "Resolution: The resolution of the waveform image is given in pixels per " "second, e.g. the default resolution of 100 means, that one second is shown " "with a width of 100 pixels." msgstr "" #. (itstool) path: item/p #: C/preferences.page:25 msgid "" "Fixed vs. moving cursor: There are two modes, how to follow the cursor. On " "slower systems a moving cursor might be smoother." msgstr "" #. (itstool) path: item/p #: C/preferences.page:26 msgid "Show time scale: Turn the time scale on or off." msgstr "" #. (itstool) path: section/title #: C/preferences.page:31 msgid "Controls" msgstr "Kontrolkirin" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:33 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-controls.png' " "md5='0b50614222d881110b176c2e28b7d18c'" msgstr "" #. (itstool) path: item/p #: C/preferences.page:36 msgid "" "Jump back on pause: Parlatype will rewind a few seconds on each " "pause, this way you can easier resume typing. Set this value to 0 if you " "don't want this behaviour." msgstr "" #. (itstool) path: item/p #: C/preferences.page:37 msgid "" "Jump back: Configures how many seconds to skip when the Jump back " "button is pressed." msgstr "" #. (itstool) path: item/p #: C/preferences.page:38 msgid "" "Jump forward: Configures how many seconds to skip when the Jump " "forward button is pressed." msgstr "" #. (itstool) path: section/title #: C/preferences.page:43 msgid "Window" msgstr "Pencere" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:45 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-window.png' " "md5='615d876529cdd45763e78a3ee01b7b3e'" msgstr "" #. (itstool) path: item/p #: C/preferences.page:48 msgid "" "Remember position: On start-up Parlatype can position its window " "where you had it when you closed Parlatype last time. This also " "remembers the window's size." msgstr "" #. (itstool) path: item/p #: C/preferences.page:49 msgid "" "Start on top: This will put Parlatype on start-up on top of other " "windows. This might be useful if you are working with a maximized word " "processor and still want to see the Parlatype window." msgstr "" #. (itstool) path: info/desc #: C/selections.page:6 msgid "How to play and repeat a selection" msgstr "" #. (itstool) path: page/title #: C/selections.page:14 msgid "Selections" msgstr "" #. (itstool) path: page/p #: C/selections.page:16 msgid "" "You can select a piece of the waveform with the mouse. Next time you press " "Play, it will play the selection only. When it is finished and " "you press Play again, it will loop the selection once." msgstr "" #. (itstool) path: note/p #: C/selections.page:18 msgid "" "When in selection mode, you can not exit the selection anymore until you " "deselect it." msgstr "" #. (itstool) path: page/p #: C/selections.page:20 msgid "" "Selections can be made with the mouse (or pointer device) with a left click, " "holding the mouse button and dragging the pointer. If you click with " "Shift key pressed, an already existing selection will be enlarged " "to that point." msgstr "" #. (itstool) path: page/p #: C/selections.page:22 msgid "" "To deselect click once with the left button into the waveform. If the " "waveform has keyboard focus, you can press Escape." msgstr "" #. (itstool) path: info/desc #: C/timestamps.page:6 msgid "Set and go to timestamps" msgstr "" #. (itstool) path: page/title #: C/timestamps.page:14 msgid "Timestamps" msgstr "Dem" #. (itstool) path: page/p #: C/timestamps.page:16 msgid "Timestamps help you to navigate in your transcription." msgstr "" #. (itstool) path: note/p #: C/timestamps.page:19 msgid "" "Timestamps look like this: #03:45.2#. You can select them with or without " "the number signs." msgstr "" #. (itstool) path: section/title #: C/timestamps.page:23 msgid "Drag and drop" msgstr "Xwêr bikşîne û berde" #. (itstool) path: section/p #: C/timestamps.page:25 msgid "" "If you select the timestamp in the word processor, you can drag and drop it " "on the Parlatype window and it will go to that position. This is " "also possible the other way round: Drag the time label from " "Parlatype to a word processor and drop it there to insert it." msgstr "" #. (itstool) path: section/title #: C/timestamps.page:29 msgid "Using the clipboard" msgstr "" #. (itstool) path: section/p #: C/timestamps.page:31 msgid "" "First make sure, the Parlatype window has focus. With the key " "sequence Ctrlc the current timestamp " "is copied to the clipboard. Changing to the word processor you can insert " "now the timestamp in your transcription." msgstr "" #. (itstool) path: section/p #: C/timestamps.page:32 msgid "" "To go to a timestamp position, copy the timestamp in the word processor to " "the clipboard. Once you have changed focus to Parlatype press " "Ctrlv." msgstr "" parlatype-1.5.4/help/ku/keyboard-shortcuts.page0000644000175000017500000000407613204122231016501 00000000000000 Standard keyboard shortcuts in Parlatype Gabor Karsay gabor.karsay@gmx.at Keyboard shortcuts

Keyboard shortcuts for Parlatype control, like Play, are described in . Shortcut keys for the window are listed below.

Standard Shortcut keys

To Do This

Pêl vê bike

Alîkariyê nîşan bide

F1

Pelgeh veke

Ctrlo

Open recent files

Ctrlr

Go to …

Ctrlg

Copy timestamp

Ctrlc

Insert timestamp

Ctrlv

Zoom in

Ctrl+

Zoom out

Ctrl-

Derkeve

Ctrlq
parlatype-1.5.4/help/ku/libreoffice-helpers.page0000644000175000017500000000645513204122231016561 00000000000000 Use Parlatype with LibreOffice Gabor Karsay gabor.karsay@gmx.at Alîkarîa LibreOffice

LibreOffice Helpers let you control Parlatype from LibreOffice. For example, you can jump easily to timestamps.

To use them, you have to assign keyboard shortcuts in LibreOffice itself. To do this, open LibreOffice, go to menu Tools and select Customize.

Go to tab Keyboard. In the lower part, Functions, there is a list called Category. At the end of that list you'll find the entry LibreOffice Macros. There is a subcategory share which has a subcategory Parlatype. After selecting Parlatype there will be a list of functions in the Functions list. Choose the function you'd like to use, select from the list Shortcut keys above a shortcut and click on the button Modify.

You can select any of these functions:

Alîkarîa LibreOffice

Helper's name

What it does

PlayPause

Toggles between play and pause. Depending on your preferences set in Parlatype it will rewind a few seconds on pause.

JumpBack

Jumps back a few seconds, depending on the preferences you set in Parlatype.

JumpForward

Jumps forward a few seconds, depending on the preferences you set in Parlatype.

InsertTimestamp

Inserts the current timestamp at the cursor's position. It does not overwrite any selection.

InsertTimestampOnNewLine

The same as above, but on a new line.

GotoTimestamp

If the cursor is set on a timestamp, it will jump to that position. The cursor has to be somewhere between the two number signs (#). Don't select the timestamp, just put the cursor inside.

IncreaseSpeed

Increases playback speed.

DecreaseSpeed

Decreases playback speed.
parlatype-1.5.4/help/ku/preferences.page0000644000175000017500000000476013204122231015146 00000000000000 How to customize Parlatype Gabor Karsay gabor.karsay@gmx.at Vebijêrk

You can reach the preferences window in the Application Menu (next to Activities in the top left corner. There are three tabs: Waveform, Controls and Window.

Waveform

Resolution: The resolution of the waveform image is given in pixels per second, e.g. the default resolution of 100 means, that one second is shown with a width of 100 pixels.

Fixed vs. moving cursor: There are two modes, how to follow the cursor. On slower systems a moving cursor might be smoother.

Show time scale: Turn the time scale on or off.
Kontrolkirin

Jump back on pause: Parlatype will rewind a few seconds on each pause, this way you can easier resume typing. Set this value to 0 if you don't want this behaviour.

Jump back: Configures how many seconds to skip when the Jump back button is pressed.

Jump forward: Configures how many seconds to skip when the Jump forward button is pressed.
Pencere

Remember size: On start-up Parlatype sets the window size to the size it had the last time.

Remember position: On start-up Parlatype can position its window where you had it when you closed Parlatype last time.

Start on top: This will put Parlatype on start-up on top of other windows. This might be useful if you are working with a maximized word processor and still want to see the Parlatype window.

Remember position and Start on top are not available on Wayland.
parlatype-1.5.4/help/ku/index.page0000644000175000017500000000173613204122231013754 00000000000000 Parlatype Parlatype Gabor Karsay gabor.karsay@gmx.at Parlatype is an easy to use media player. Its main purpose is to help you transcribing speech. <media type="image" mime="image/png" src="figures/parlatype-icon.png" its:translate="no"/> Parlatype

Parlatype is an easy to use media player. Its main purpose is to help you transcribing speech.

For a quick overview have a look at . Other topics are covered below.

Help topics
parlatype-1.5.4/help/ku/ku.stamp0000644000175000017500000000000013204122231013453 00000000000000parlatype-1.5.4/help/ku/drag-and-drop.page0000644000175000017500000000264413204122231015263 00000000000000 Drop files, file names or timestamps on Parlatype Gabor Karsay gabor.karsay@gmx.at Drag and Drop

You can drop files, file names or timestamps on Parlatype's window.

Files: Drag and drop a file from a file manager, e.g. Files, on Parlatype and it will open that file.

File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that file. This will always work if the selection contains a full path. If you select the name only, Parlatype will look up its full path in the list of recent files and open it if it can find it in that list.

Timestamps: You can drag and drop timestamps in both directions. Select a timestamp from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will jump to that position. Or you click on Parlatype's time label and drag it to a word processor to insert it there.

 parlatype-1.5.4/help/ku/media-keys.page0000644000175000017500000000342713204122231014674 00000000000000 How to control Parlatype with media keys Gabor Karsay gabor.karsay@gmx.at Media keys

Parlatype's basic functions can be controlled with so called media keys. Media keys are used system wide to control media players and they are working even if the media player is not in focus or in the background.

You can change the media keys in GNOME settings. You can use dedicated keys from a multimedia keyboard or use any other key or combination of keys.

This will affect other media players, e.g. Totem or Rhythmbox, as well.

Parlatype listens to these key strokes:

Play, Pause, Stop: Each of these keys toggles between playing and pause.

Rewind, Previous: Each of these keys will jump back the time you selected in Preferences.

Fast Forward, Next: Each of these keys will jump ahead the time you selected in Preferences.

For detailed instructions how to change keyboard shortcuts in GNOME see the official documentation.

If you are using a dedicated foot pedal, it should be possible to map the foot pedal signals to any of the keys. This is not well tested, however. Any feedback regarding foot pedals is welcome.

 parlatype-1.5.4/help/ku/timestamps.page0000644000175000017500000000300413204122231015021 00000000000000 Set and go to timestamps Gabor Karsay gabor.karsay@gmx.at Dem

Timestamps help you to navigate in your transcription.

Timestamps look like this: #03:45.2#. You can select them with or without the number signs.
Xwêr bikşîne û berde

If you select the timestamp in the word processor, you can drag and drop it on the Parlatype window and it will go to that position. This is also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it.

Using the clipboard

First make sure, the Parlatype window has focus. With the key sequence Ctrlc the current timestamp is copied to the clipboard. Changing to the word processor you can insert now the timestamp in your transcription.

To go to a timestamp position, copy the timestamp in the word processor to the clipboard. Once you have changed focus to Parlatype press Ctrlv.

 parlatype-1.5.4/help/ku/legal.xml0000644000175000017500000000051413204122231013606 00000000000000

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International license.

 parlatype-1.5.4/help/pt/0000755000175000017500000000000013204324054012073 500000000000000parlatype-1.5.4/help/pt/selections.page0000644000175000017500000000221413204122232015012 00000000000000 Como tocar e repetir uma seleção Gabor Karsay gabor.karsay@gmx.at Seleções

You can select a piece of the waveform with the mouse. Next time you press Play, it will play the selection only. When it is finished and you press Play again, it will loop the selection once.

When in selection mode, you can not exit the selection anymore until you deselect it.

Selections can be made with the mouse (or pointer device) with a left click, holding the mouse button and dragging the pointer. If you click with Shift key pressed, an already existing selection will be enlarged to that point.

To deselect click once with the left button into the waveform. If the waveform has keyboard focus, you can press Escape.

 parlatype-1.5.4/help/pt/first-steps.page0000644000175000017500000000437313204122232015135 00000000000000 First steps with Parlatype Gabor Karsay gabor.karsay@gmx.at First steps with Parlatype

Parlatype is an easy to use audio player to help you transcribing or annotating recorded speech. You need to run a word processor, e.g. LibreOffice, too. Launch Parlatype and open an audio file by clicking on the Open button in the upper left corner.

You can also drag and drop a file on Parlatype or open the recently used files in the Application menu.

Now in the upper left corner there is a Play button which toggles between play and pause. Whenever you pause, Parlatype rewinds a few seconds to make it easier to resume. This can be changed in the .

The buttons Jump back and Jump forward in the lower left corner skip a few seconds back or ahead. The amount of time can be changed in the .

The view scrolls automatically so that the cursor is always visible. You can scroll manually by clicking on or dragging the scroll bar or using the standard keybindings. Automatic scrolling is stopped then.

To get back to the cursor's position and let the view scroll automatically again, click on the Go to button next to the time label. Clicking on the Play button also turns automatic scrolling on.

Clicking in the view with the right mouse button will put the cursor there, also holding the right mouse button pressed and moving it. The left mouse button is for .

The speed scale next to the volume button in the lower right corner lets you adjust the speed of playback. A value of 1 means normal speed, everything lower (down to 0.5) is slower, everything above is faster.

 parlatype-1.5.4/help/pt/pt.stamp0000644000175000017500000000000013204122232013464 00000000000000parlatype-1.5.4/help/pt/keyboard-shortcuts.page0000644000175000017500000000407113204122232016501 00000000000000 Standard keyboard shortcuts in Parlatype Gabor Karsay gabor.karsay@gmx.at Keyboard shortcuts

Keyboard shortcuts for Parlatype control, like Play, are described in . Shortcut keys for the window are listed below.

Standard Shortcut keys

To Do This

Press This

Mostrar ajuda

F1

Abrir arquivo

Ctrlo

Abrir arquivos recentes

Ctrlr

Ir para ...

Ctrlg

Copiar timestamp

Ctrlc

Inserir timestamp

Ctrlv

Ampliar

Ctrl+

Reduzir

Ctrl-

Sair

Ctrlq
parlatype-1.5.4/help/pt/libreoffice-helpers.page0000644000175000017500000000644713204122232016567 00000000000000 Use Parlatype with LibreOffice Gabor Karsay gabor.karsay@gmx.at LibreOffice Helpers

LibreOffice Helpers let you control Parlatype from LibreOffice. For example, you can jump easily to timestamps.

To use them, you have to assign keyboard shortcuts in LibreOffice itself. To do this, open LibreOffice, go to menu Tools and select Customize.

Go to tab Keyboard. In the lower part, Functions, there is a list called Category. At the end of that list you'll find the entry LibreOffice Macros. There is a subcategory share which has a subcategory Parlatype. After selecting Parlatype there will be a list of functions in the Functions list. Choose the function you'd like to use, select from the list Shortcut keys above a shortcut and click on the button Modify.

You can select any of these functions:

LibreOffice Helpers

Helper's name

What it does

PlayPause

Toggles between play and pause. Depending on your preferences set in Parlatype it will rewind a few seconds on pause.

JumpBack

Jumps back a few seconds, depending on the preferences you set in Parlatype.

JumpForward

Jumps forward a few seconds, depending on the preferences you set in Parlatype.

InsertTimestamp

Inserts the current timestamp at the cursor's position. It does not overwrite any selection.

InsertTimestampOnNewLine

The same as above, but on a new line.

GotoTimestamp

If the cursor is set on a timestamp, it will jump to that position. The cursor has to be somewhere between the two number signs (#). Don't select the timestamp, just put the cursor inside.

IncreaseSpeed

Increases playback speed.

DecreaseSpeed

Decreases playback speed.
parlatype-1.5.4/help/pt/preferences.page0000644000175000017500000000522513204122232015150 00000000000000 Como personalizar o Parlatype Gabor Karsay gabor.karsay@gmx.at Preferências

Você pode encontrar a janela de preferências no menu Aplicação (próximo à Atividades no topo esquerdo superior. Existem três abas: Forma da Onda, Controles e Janela.

Forma da Onda

Resolução: A resolução da imagem da forma da onda é dada em pixels por segundo, isto é, a resolução padrão de 100 significa que um segundo é mostrado com uma largura de 100 pixels.

Cursor fixo vs. móvel: Existem dois modos que você pode acompanhar o cursor. Em sistemas mais lentos, um cursor móvel pode ser mais suave.

Exibir escala de tempo: Habilita ou desabilita a escala de tempo.
Controles

Voltar ao pausar: O Parlatype irá retroceder alguns segundos a cada pausa, dessa forma você pode facilmente voltar a escrever. Deixe este valor em 0 se você não deseja esse comportamento.

Voltar atrás: Configure quantos segudos serão retrocedidos quando o botão Voltar atrás for pressionado.

Avançar: configure quantos segundos deverão ser avançados quando o botão Avançar for pressionado.
Janela

Remember size: On start-up Parlatype sets the window size to the size it had the last time.

Remember position: On start-up Parlatype can position its window where you had it when you closed Parlatype last time.

Iniciar à frente: Isto irá colocar o Parlatype à frente de outras janelas ao iniciar. Isso pode ser útil se você estiver trabalhando com um editor de texto maximizado e ainda gostaria de ver a janela do Parlatype.

Remember position and Start on top are not available on Wayland.
parlatype-1.5.4/help/pt/pt.po0000644000175000017500000006125713176574164013032 00000000000000# Portuguese translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Bruno Barreto , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-04-18 20:55+0200\n" "PO-Revision-Date: 2017-06-27 15:25+0000\n" "Last-Translator: Bruno Barreto \n" "Language-Team: Portuguese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-06-29 09:44+0000\n" "X-Generator: Launchpad (build 18418)\n" #. Put one translator per line, in the form NAME , YEAR1, YEAR2 msgctxt "_" msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Bruno Barreto https://launchpad.net/~brunoafbarreto" #. (itstool) path: info/title #: C/index.page:7 msgctxt "text" msgid "Parlatype" msgstr "" #. (itstool) path: info/title #: C/index.page:8 msgctxt "link" msgid "Parlatype" msgstr "" #. (itstool) path: credit/name #: C/index.page:10 #: C/drag-and-drop.page:8 #: C/first-steps.page:8 #: C/keyboard-shortcuts.page:8 #: C/media-keys.page:8 #: C/preferences.page:8 #: C/selections.page:8 #: C/timestamps.page:8 #: C/libreoffice-helpers.page:9 msgid "Gabor Karsay" msgstr "" #. (itstool) path: info/desc #. (itstool) path: page/p #: C/index.page:14 #: C/index.page:23 msgid "" "Parlatype is an easy to use media player. Its main purpose is to " "help you transcribing speech." msgstr "" #. (itstool) path: page/title #: C/index.page:18 msgid "<_:media-1/> Parlatype" msgstr "" #. (itstool) path: page/p #: C/index.page:24 msgid "" "For a quick overview have a look at . Other " "topics are covered below." msgstr "" #. (itstool) path: section/title #: C/index.page:27 msgid "Help topics" msgstr "" #. (itstool) path: info/desc #: C/drag-and-drop.page:6 msgid "Drop files, file names or timestamps on Parlatype" msgstr "" #. (itstool) path: page/title #: C/drag-and-drop.page:14 msgid "Drag and Drop" msgstr "" #. (itstool) path: page/p #: C/drag-and-drop.page:16 msgid "" "You can drop files, file names or timestamps on Parlatype's " "window." msgstr "" #. (itstool) path: item/p #: C/drag-and-drop.page:19 msgid "" "Files: Drag and drop a file from a file manager, e.g. Files, on " "Parlatype and it will open that file." msgstr "" #. (itstool) path: item/p #: C/drag-and-drop.page:20 msgid "" "File names: Select a file name from a word processor, e.g. " "LibreOffice, drop the selected text on Parlatype and " "it will open that file. This will always work if the selection contains a " "full path. If you select the name only, Parlatype will look up " "its full path in the list of recent files and open it if it can find it in " "that list." msgstr "" #. (itstool) path: item/p #: C/drag-and-drop.page:21 msgid "" "Timestamps: You can drag and drop timestamps in both directions. Select a " "timestamp from a word processor, e.g. LibreOffice, drop the " "selected text on Parlatype and it will jump to that position. Or " "you click on Parlatype's time label and drag it to a word " "processor to insert it there." msgstr "" #. (itstool) path: info/desc #. (itstool) path: page/title #: C/first-steps.page:6 #: C/first-steps.page:14 msgid "First steps with Parlatype" msgstr "" #. (itstool) path: page/p #: C/first-steps.page:16 msgid "" "Parlatype is an easy to use audio player to help you transcribing " "or annotating recorded speech. You need to run a word processor, e.g. " "LibreOffice, too. Launch Parlatype and open an audio " "file by clicking on the Open button in the upper left corner." msgstr "" #. (itstool) path: note/p #: C/first-steps.page:19 msgid "" "You can also drag and drop a file on Parlatype or open the " "recently used files in the Application menu." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:22 msgid "" "Now in the upper left corner there is a Play button which toggles " "between play and pause. Whenever you pause, Parlatype rewinds a " "few seconds to make it easier to resume. This can be changed in the ." msgstr "" #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/first-steps.page:24 msgctxt "_" msgid "" "external ref='figures/parlatype-main-window.png' " "md5='1e21a2ddc61fda06238b6b1537191cb3'" msgstr "" #. (itstool) path: page/p #: C/first-steps.page:26 msgid "" "The buttons Jump back and Jump forward in the lower " "left corner skip a few seconds back or ahead. The amount of time can be " "changed in the ." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:28 msgid "" "The view scrolls automatically so that the cursor is always visible. You can " "scroll manually by clicking on or dragging the scroll bar or using the " "standard keybindings. Automatic scrolling is stopped then." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:30 msgid "" "To get back to the cursor's position and let the view scroll automatically " "again, click on the Go to button next to the time label. Clicking " "on the Play button also turns automatic scrolling on." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:32 msgid "" "Clicking in the view with the right mouse button will put the cursor there, " "also holding the right mouse button pressed and moving it. The left mouse " "button is for ." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:34 msgid "" "The speed scale next to the volume button in the lower " "right corner lets you adjust the speed of playback. A value of 1 means " "normal speed, everything lower (down to 0.5) is slower, everything above is " "faster." msgstr "" #. (itstool) path: info/desc #: C/keyboard-shortcuts.page:6 msgid "Standard keyboard shortcuts in Parlatype" msgstr "" #. (itstool) path: page/title #: C/keyboard-shortcuts.page:14 msgid "Keyboard shortcuts" msgstr "" #. (itstool) path: page/p #: C/keyboard-shortcuts.page:16 msgid "" "Keyboard shortcuts for Parlatype control, like Play, " "are described in . Shortcut keys for the window are " "listed below." msgstr "" #. (itstool) path: table/title #: C/keyboard-shortcuts.page:19 msgid "Standard Shortcut keys" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:22 msgid "To Do This" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:23 msgid "Press This" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:28 msgid "Show help" msgstr "Mostrar ajuda" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:29 msgid "F1" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:32 msgid "Open file" msgstr "Abrir arquivo" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:33 msgid "Ctrlo" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:36 msgid "Open recent files" msgstr "Abrir arquivos recentes" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:37 msgid "Ctrlr" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:40 msgid "Go to …" msgstr "Ir para ..." #. (itstool) path: td/p #: C/keyboard-shortcuts.page:41 msgid "Ctrlg" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:44 msgid "Copy timestamp" msgstr "Copiar timestamp" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:45 msgid "Ctrlc" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:48 msgid "Insert timestamp" msgstr "Inserir timestamp" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:49 msgid "Ctrlv" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:52 msgid "Zoom in" msgstr "Ampliar" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:53 msgid "Ctrl+" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:56 msgid "Zoom out" msgstr "Reduzir" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:57 msgid "Ctrl-" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:60 msgid "Quit" msgstr "Sair" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:61 msgid "Ctrlq" msgstr "" #. (itstool) path: p/link #: C/legal.xml:5 msgid "Creative Commons Attribution-ShareAlike 4.0 International" msgstr "Creative Commons Atribuição-CompartilhaIgual 4.0 Internacional" #. (itstool) path: license/p #: C/legal.xml:4 msgid "This work is licensed under a <_:link-1/> license." msgstr "Este trabalho é licenciado sob uma licença <_:link-1/>" #. (itstool) path: info/desc #: C/media-keys.page:6 msgid "How to control Parlatype with media keys" msgstr "Como controlar o Parlatype com as teclas multimídia" #. (itstool) path: page/title #: C/media-keys.page:14 msgid "Media keys" msgstr "Teclas multimídia" #. (itstool) path: page/p #: C/media-keys.page:16 msgid "" "Parlatype's basic functions can be controlled with so called " "media keys. Media keys are used system wide to control media " "players and they are working even if the media player is not in focus or in " "the background." msgstr "" "As funções básicas do Parlatype podem ser controladas com as " "chamadas teclas multimídia. As teclas multimídia são usadas em todo " "o sistema para controlar os tocadores de mídia e elas continuam funcionando " "mesmo se o tocador estiver inativo ou estiver funcionando em segundo plano." #. (itstool) path: page/p #: C/media-keys.page:18 msgid "" "You can change the media keys in GNOME settings. You can use dedicated keys " "from a multimedia keyboard or use any other key or combination of keys." msgstr "" "Você pode mudar as teclas multimídia nas configurações do GNOME. Você pode " "usar as teclas dedicadas de um teclado multimídia ou utilizar qualquer outra " "combinação de teclas." #. (itstool) path: note/p #: C/media-keys.page:21 msgid "" "This will affect other media players, e.g. Totem or " "Rhythmbox, as well." msgstr "" "Isto afetará outros tocadores de mídia, como o Totem ou o " "Rhythmbox." #. (itstool) path: page/p #: C/media-keys.page:24 msgid "Parlatype listens to these key strokes:" msgstr "O Parlatype obedece aos seguintes atalhos:" #. (itstool) path: item/p #: C/media-keys.page:26 msgid "" "Play, Pause, Stop: Each of these keys " "toggles between playing and pause." msgstr "" "Tocar, Pausar, Parar: Cada uma dessas " "teclas mudam entre tocar e pausar." #. (itstool) path: item/p #: C/media-keys.page:27 msgid "" "Rewind, Previous: Each of these keys will jump back " "the time you selected in Preferences." msgstr "" "Voltar, Anterior: Cada uma dessas teclas irão voltar o " "tempo que você selecionou em Preferências." #. (itstool) path: item/p #: C/media-keys.page:28 msgid "" "Fast Forward, Next: Each of these keys will jump ahead " "the time you selected in Preferences." msgstr "" "Avançar, Próxima: Cada uma dessas teclas irão avançar " "o tempo que você selecionou em Preferências." #. (itstool) path: note/p #: C/media-keys.page:32 msgid "" "For detailed instructions how to change keyboard shortcuts in GNOME see the " "official " "documentation." msgstr "" "Para instruções detalhadas de como mudar os atalhos de teclado no GNOME, " "veja a documentação " "oficial." #. (itstool) path: page/p #: C/media-keys.page:35 msgid "" "If you are using a dedicated foot pedal, it should be possible to map the " "foot pedal signals to any of the keys. This is not well tested, however. Any " "feedback regarding foot pedals is welcome." msgstr "" "Se você estiver utilizando um pedal dedicado, deverá ser possível mapear os " "sinais enviados para qualquer uma das teclas. Isto ainda não foi testado. " "Qualquer feedback sobre pedais é bem vindo." #. (itstool) path: info/desc #: C/preferences.page:6 msgid "How to customize Parlatype" msgstr "Como personalizar o Parlatype" #. (itstool) path: page/title #: C/preferences.page:14 msgid "Preferences" msgstr "Preferências" #. (itstool) path: page/p #: C/preferences.page:16 msgid "" "You can reach the preferences window in the Application Menu (next to " "Activities in the top left corner. There are three tabs: " "Waveform, Controls and Window." msgstr "" "Você pode encontrar a janela de preferências no menu Aplicação (próximo à " "Atividades no topo esquerdo superior. Existem três abas: " "Forma da Onda, Controles e Janela." #. (itstool) path: section/title #: C/preferences.page:19 msgid "Waveform" msgstr "Forma da Onda" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:21 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-waveform.png' " "md5='e9d05960162dcdddab10378e21ce63da'" msgstr "" #. (itstool) path: item/p #: C/preferences.page:24 msgid "" "Resolution: The resolution of the waveform image is given in pixels per " "second, e.g. the default resolution of 100 means, that one second is shown " "with a width of 100 pixels." msgstr "" "Resolução: A resolução da imagem da forma da onda é dada em pixels por " "segundo, isto é, a resolução padrão de 100 significa que um segundo é " "mostrado com uma largura de 100 pixels." #. (itstool) path: item/p #: C/preferences.page:25 msgid "" "Fixed vs. moving cursor: There are two modes, how to follow the cursor. On " "slower systems a moving cursor might be smoother." msgstr "" "Cursor fixo vs. móvel: Existem dois modos que você pode acompanhar o cursor. " "Em sistemas mais lentos, um cursor móvel pode ser mais suave." #. (itstool) path: item/p #: C/preferences.page:26 msgid "Show time scale: Turn the time scale on or off." msgstr "Exibir escala de tempo: Habilita ou desabilita a escala de tempo." #. (itstool) path: section/title #: C/preferences.page:31 msgid "Controls" msgstr "Controles" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:33 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-controls.png' " "md5='0b50614222d881110b176c2e28b7d18c'" msgstr "" #. (itstool) path: item/p #: C/preferences.page:36 msgid "" "Jump back on pause: Parlatype will rewind a few seconds on each " "pause, this way you can easier resume typing. Set this value to 0 if you " "don't want this behaviour." msgstr "" "Voltar ao pausar: O Parlatype irá retroceder alguns segundos a " "cada pausa, dessa forma você pode facilmente voltar a escrever. Deixe este " "valor em 0 se você não deseja esse comportamento." #. (itstool) path: item/p #: C/preferences.page:37 msgid "" "Jump back: Configures how many seconds to skip when the Jump back " "button is pressed." msgstr "" "Voltar atrás: Configure quantos segudos serão retrocedidos quando o botão " "Voltar atrás for pressionado." #. (itstool) path: item/p #: C/preferences.page:38 msgid "" "Jump forward: Configures how many seconds to skip when the Jump " "forward button is pressed." msgstr "" "Avançar: configure quantos segundos deverão ser avançados quando o botão " "Avançar for pressionado." #. (itstool) path: section/title #: C/preferences.page:43 msgid "Window" msgstr "Janela" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:45 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-window.png' " "md5='615d876529cdd45763e78a3ee01b7b3e'" msgstr "" #. (itstool) path: item/p #: C/preferences.page:48 msgid "" "Remember position: On start-up Parlatype can position its window " "where you had it when you closed Parlatype last time. This also " "remembers the window's size." msgstr "" "Lembrar posição: Ao iniciar, o Parlatype pode posicionar a janela " "onde estava quando você o fechou da última vez. O tamanho da janela também " "será lembrado." #. (itstool) path: item/p #: C/preferences.page:49 msgid "" "Start on top: This will put Parlatype on start-up on top of other " "windows. This might be useful if you are working with a maximized word " "processor and still want to see the Parlatype window." msgstr "" "Iniciar à frente: Isto irá colocar o Parlatype à frente de outras " "janelas ao iniciar. Isso pode ser útil se você estiver trabalhando com um " "editor de texto maximizado e ainda gostaria de ver a janela do " "Parlatype." #. (itstool) path: info/desc #: C/selections.page:6 msgid "How to play and repeat a selection" msgstr "Como tocar e repetir uma seleção" #. (itstool) path: page/title #: C/selections.page:14 msgid "Selections" msgstr "Seleções" #. (itstool) path: page/p #: C/selections.page:16 msgid "" "You can select a piece of the waveform with the mouse. Next time you press " "Play, it will play the selection only. When it is finished and " "you press Play again, it will loop the selection once." msgstr "" #. (itstool) path: note/p #: C/selections.page:18 msgid "" "When in selection mode, you can not exit the selection anymore until you " "deselect it." msgstr "" #. (itstool) path: page/p #: C/selections.page:20 msgid "" "Selections can be made with the mouse (or pointer device) with a left click, " "holding the mouse button and dragging the pointer. If you click with " "Shift key pressed, an already existing selection will be enlarged " "to that point." msgstr "" #. (itstool) path: page/p #: C/selections.page:22 msgid "" "To deselect click once with the left button into the waveform. If the " "waveform has keyboard focus, you can press Escape." msgstr "" #. (itstool) path: info/desc #: C/timestamps.page:6 msgid "Set and go to timestamps" msgstr "" #. (itstool) path: page/title #: C/timestamps.page:14 msgid "Timestamps" msgstr "" #. (itstool) path: page/p #: C/timestamps.page:16 msgid "Timestamps help you to navigate in your transcription." msgstr "" #. (itstool) path: note/p #: C/timestamps.page:19 msgid "" "Timestamps look like this: #03:45.2#. You can select them with or without " "the number signs." msgstr "" #. (itstool) path: section/title #: C/timestamps.page:23 msgid "Drag and drop" msgstr "" #. (itstool) path: section/p #: C/timestamps.page:25 msgid "" "If you select the timestamp in the word processor, you can drag and drop it " "on the Parlatype window and it will go to that position. This is " "also possible the other way round: Drag the time label from " "Parlatype to a word processor and drop it there to insert it." msgstr "" #. (itstool) path: section/title #: C/timestamps.page:29 msgid "Using the clipboard" msgstr "" #. (itstool) path: section/p #: C/timestamps.page:31 msgid "" "First make sure, the Parlatype window has focus. With the key " "sequence Ctrlc the current timestamp " "is copied to the clipboard. Changing to the word processor you can insert " "now the timestamp in your transcription." msgstr "" #. (itstool) path: section/p #: C/timestamps.page:32 msgid "" "To go to a timestamp position, copy the timestamp in the word processor to " "the clipboard. Once you have changed focus to Parlatype press " "Ctrlv." msgstr "" #. (itstool) path: info/desc #: C/libreoffice-helpers.page:7 msgid "Use Parlatype with LibreOffice" msgstr "" #. (itstool) path: page/title #. (itstool) path: table/title #: C/libreoffice-helpers.page:15 #: C/libreoffice-helpers.page:30 msgid "LibreOffice Helpers" msgstr "" #. (itstool) path: page/p #: C/libreoffice-helpers.page:17 msgid "" "LibreOffice Helpers let you control Parlatype from " "LibreOffice. For example, you can jump easily to timestamps." msgstr "" #. (itstool) path: page/p #: C/libreoffice-helpers.page:19 msgid "" "To use them, you have to assign keyboard shortcuts in LibreOffice " "itself. To do this, open LibreOffice, go to menu Tools " "and select Customize." msgstr "" #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/libreoffice-helpers.page:21 msgctxt "_" msgid "" "external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" msgstr "" #. (itstool) path: page/p #: C/libreoffice-helpers.page:23 msgid "" "Go to tab Keyboard. In the lower part, Functions, " "there is a list called Category. At the end of that list you'll " "find the entry LibreOffice Macros. There is a subcategory " "share which has a subcategory Parlatype. After " "selecting Parlatype there will be a list of functions in the " "Functions list. Choose the function you'd like to use, select " "from the list Shortcut keys above a shortcut and click on the " "button Modify." msgstr "" #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/libreoffice-helpers.page:25 msgctxt "_" msgid "" "external ref='figures/lo-customize.png' " "md5='081564921275129bee7bbd10220547e7'" msgstr "" #. (itstool) path: page/p #: C/libreoffice-helpers.page:27 msgid "You can select any of these functions:" msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:33 msgid "Helper's name" msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:34 msgid "What it does" msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:40 msgid "" "Toggles between play and pause. Depending on your preferences set in " "Parlatype it will rewind a few seconds on pause." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:44 msgid "" "Jumps back a few seconds, depending on the preferences you set in " "Parlatype." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:48 msgid "" "Jumps forward a few seconds, depending on the preferences you set in " "Parlatype." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:52 msgid "" "Inserts the current timestamp at the cursor's position. It does not " "overwrite any selection." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:56 msgid "The same as above, but on a new line." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:60 msgid "" "If the cursor is set on a timestamp, it will jump to that position. The " "cursor has to be somewhere between the two number signs (#). Don't select " "the timestamp, just put the cursor inside." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:64 msgid "Increases playback speed." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:68 msgid "Decreases playback speed." msgstr "" parlatype-1.5.4/help/pt/index.page0000644000175000017500000000173613204122232013761 00000000000000 Parlatype Parlatype Gabor Karsay gabor.karsay@gmx.at Parlatype is an easy to use media player. Its main purpose is to help you transcribing speech. <media type="image" mime="image/png" src="figures/parlatype-icon.png" its:translate="no"/> Parlatype

Parlatype is an easy to use media player. Its main purpose is to help you transcribing speech.

For a quick overview have a look at . Other topics are covered below.

Help topics
parlatype-1.5.4/help/pt/drag-and-drop.page0000644000175000017500000000264413204122232015270 00000000000000 Drop files, file names or timestamps on Parlatype Gabor Karsay gabor.karsay@gmx.at Drag and Drop

You can drop files, file names or timestamps on Parlatype's window.

Files: Drag and drop a file from a file manager, e.g. Files, on Parlatype and it will open that file.

File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that file. This will always work if the selection contains a full path. If you select the name only, Parlatype will look up its full path in the list of recent files and open it if it can find it in that list.

Timestamps: You can drag and drop timestamps in both directions. Select a timestamp from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will jump to that position. Or you click on Parlatype's time label and drag it to a word processor to insert it there.

 parlatype-1.5.4/help/pt/media-keys.page0000644000175000017500000000367313204122232014704 00000000000000 Como controlar o Parlatype com as teclas multimídia Gabor Karsay gabor.karsay@gmx.at Teclas multimídia

As funções básicas do Parlatype podem ser controladas com as chamadas teclas multimídia. As teclas multimídia são usadas em todo o sistema para controlar os tocadores de mídia e elas continuam funcionando mesmo se o tocador estiver inativo ou estiver funcionando em segundo plano.

Você pode mudar as teclas multimídia nas configurações do GNOME. Você pode usar as teclas dedicadas de um teclado multimídia ou utilizar qualquer outra combinação de teclas.

Isto afetará outros tocadores de mídia, como o Totem ou o Rhythmbox.

O Parlatype obedece aos seguintes atalhos:

Tocar, Pausar, Parar: Cada uma dessas teclas mudam entre tocar e pausar.

Voltar, Anterior: Cada uma dessas teclas irão voltar o tempo que você selecionou em Preferências.

Avançar, Próxima: Cada uma dessas teclas irão avançar o tempo que você selecionou em Preferências.

Para instruções detalhadas de como mudar os atalhos de teclado no GNOME, veja a documentação oficial.

Se você estiver utilizando um pedal dedicado, deverá ser possível mapear os sinais enviados para qualquer uma das teclas. Isto ainda não foi testado. Qualquer feedback sobre pedais é bem vindo.

 parlatype-1.5.4/help/pt/timestamps.page0000644000175000017500000000300013204122232015022 00000000000000 Set and go to timestamps Gabor Karsay gabor.karsay@gmx.at Timestamps

Timestamps help you to navigate in your transcription.

Timestamps look like this: #03:45.2#. You can select them with or without the number signs.
Drag and drop

If you select the timestamp in the word processor, you can drag and drop it on the Parlatype window and it will go to that position. This is also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it.

Using the clipboard

First make sure, the Parlatype window has focus. With the key sequence Ctrlc the current timestamp is copied to the clipboard. Changing to the word processor you can insert now the timestamp in your transcription.

To go to a timestamp position, copy the timestamp in the word processor to the clipboard. Once you have changed focus to Parlatype press Ctrlv.

 parlatype-1.5.4/help/pt/legal.xml0000644000175000017500000000052513204122232013615 00000000000000

Este trabalho é licenciado sob uma licença Creative Commons Atribuição-CompartilhaIgual 4.0 Internacional

 parlatype-1.5.4/help/C/0000755000175000017500000000000013204324054011632 500000000000000parlatype-1.5.4/help/C/selections.page0000644000175000017500000000214313176574164014601 00000000000000 How to play and repeat a selection Gabor Karsay gabor.karsay@gmx.at Selections

You can select a piece of the waveform with the mouse. Next time you press Play, it will play the selection only. When it is finished and you press Play again, it will loop the selection once.

When in selection mode, you can not exit the selection anymore until you deselect it.

Selections can be made with the mouse (or pointer device) with a left click, holding the mouse button and dragging the pointer. If you click with Shift key pressed, an already existing selection will be enlarged to that point.

To deselect click once with the left button into the waveform. If the waveform has keyboard focus, you can press Escape.

 parlatype-1.5.4/help/C/first-steps.page0000644000175000017500000000432513176574164014720 00000000000000 First steps with Parlatype Gabor Karsay gabor.karsay@gmx.at First steps with Parlatype

Parlatype is an easy to use audio player to help you transcribing or annotating recorded speech. You need to run a word processor, e.g. LibreOffice, too. Launch Parlatype and open an audio file by clicking on the Open button in the upper left corner.

You can also drag and drop a file on Parlatype or open the recently used files in the Application menu.

Now in the upper left corner there is a Play button which toggles between play and pause. Whenever you pause, Parlatype rewinds a few seconds to make it easier to resume. This can be changed in the .

The buttons Jump back and Jump forward in the lower left corner skip a few seconds back or ahead. The amount of time can be changed in the .

The view scrolls automatically so that the cursor is always visible. You can scroll manually by clicking on or dragging the scroll bar or using the standard keybindings. Automatic scrolling is stopped then.

To get back to the cursor's position and let the view scroll automatically again, click on the Go to button next to the time label. Clicking on the Play button also turns automatic scrolling on.

Clicking in the view with the right mouse button will put the cursor there, also holding the right mouse button pressed and moving it. The left mouse button is for .

The speed scale next to the volume button in the lower right corner lets you adjust the speed of playback. A value of 1 means normal speed, everything lower (down to 0.5) is slower, everything above is faster.

 parlatype-1.5.4/help/C/keyboard-shortcuts.page0000644000175000017500000000377713176574164016303 00000000000000 Standard keyboard shortcuts in Parlatype Gabor Karsay gabor.karsay@gmx.at Keyboard shortcuts

Keyboard shortcuts for Parlatype control, like Play, are described in . Shortcut keys for the window are listed below.

Standard Shortcut keys

To Do This

Press This

Show help

F1

Open file

Ctrlo

Open recent files

Ctrlr

Go to …

Ctrlg

Copy timestamp

Ctrlc

Insert timestamp

Ctrlv

Zoom in

Ctrl+

Zoom out

Ctrl-

Quit

Ctrlq
parlatype-1.5.4/help/C/libreoffice-helpers.page0000644000175000017500000000640413176574164016346 00000000000000 Use Parlatype with LibreOffice Gabor Karsay gabor.karsay@gmx.at LibreOffice Helpers

LibreOffice Helpers let you control Parlatype from LibreOffice. For example, you can jump easily to timestamps.

To use them, you have to assign keyboard shortcuts in LibreOffice itself. To do this, open LibreOffice, go to menu Tools and select Customize.

Go to tab Keyboard. In the lower part, Functions, there is a list called Category. At the end of that list you'll find the entry LibreOffice Macros. There is a subcategory share which has a subcategory Parlatype. After selecting Parlatype there will be a list of functions in the Functions list. Choose the function you'd like to use, select from the list Shortcut keys above a shortcut and click on the button Modify.

You can select any of these functions:

LibreOffice Helpers

Helper's name

What it does

PlayPause

Toggles between play and pause. Depending on your preferences set in Parlatype it will rewind a few seconds on pause.

JumpBack

Jumps back a few seconds, depending on the preferences you set in Parlatype.

JumpForward

Jumps forward a few seconds, depending on the preferences you set in Parlatype.

InsertTimestamp

Inserts the current timestamp at the cursor's position. It does not overwrite any selection.

InsertTimestampOnNewLine

The same as above, but on a new line.

GotoTimestamp

If the cursor is set on a timestamp, it will jump to that position. The cursor has to be somewhere between the two number signs (#). Don't select the timestamp, just put the cursor inside.

IncreaseSpeed

Increases playback speed.

DecreaseSpeed

Decreases playback speed.
parlatype-1.5.4/help/C/figures/0000755000175000017500000000000013204324054013276 500000000000000parlatype-1.5.4/help/C/figures/parlatype-prefs-window.png0000644000175000017500000003254613176574164020402 00000000000000PNG  IHDRl@FsBIT|dtEXtSoftwaregnome-screenshot> IDATxw|umM!$Ћ4Y9Eѳb㰞XQ!g=ϳx!RNHo$dH|?!!;~g6~gv"""""""""""'0k髈ʯ5@0u 74iҍNfsYDH)--1cƌƍ)pԆtc t`V^}c׮]/6ߏ?""r3 ͆oذa-))Y |eh7ا^ٿq`DD~yvjժ ZFFݻs+EDgt%y֬Y€к!@`6 ;//o|l,"˶f͚  ڹl!_M5~F*" Mme]_M[Oh`*"KYS s$0](""GAXXpPWxhox9BqXED vа-Fc魌""ǞŠ6i:l9q6|mtJDs""7 [Dt9Zi9~4{Gi[D [D"""w:Z{ӯ=o5?rۡA }C,O s^mÏi# u,Vֳ3MHpLao~iF]qٝ;s]c|>&Lºy7xh9at8z53Ϟ5{zv-̼ng? +vgqS 7RuW\w-W^x*z$'~F~q(+/gcOnzxt*Lڻ =Dlyo~ '.d~7iop{MGXa}Н;3gEןW~6c︍gLe=<ݻem8Y)+WwN" OڢV'gŷ&ֵ;~W7>bfmwSqA%~g'90k[WeЩv.r\rϗ8FNKeC>)^jSq[W7LjrfY|lLN-}$vjcZ4vEMix0_1;i>{scl6_6uDլSCL\r=\+%M7jg)^Gn͚Șµ^CдΕƨ?^E bvsJ^{{>h#Y/4.сPjs)]ư<>5yl.}w]B–_7d/^Eә̱ojtV6Gд,B*W\x5خbjN=˺Ͽe3sѴ;~?i5)C֓ImXsumWf5ik/f.fGHȁk$&&b8,#N0|\68ȵtڿ5,2V]I摧\\xp㡝oc’_;W"unTt5~_~[3\Çu !\t+9r,b?_}׃ {M?>&EզFOw5׀3G?E_<t\}wt6~ m ͭ2j3*>$ZѶ#KSadrN\R=9{sYysLǣ9l'+]x3I$v=aby>E2A^W_Ocv Gfԇx\6b\v}moFIyG)dm%lago.mmr&<>^}BѴH+Mv2`YYYĴƍ'Gc7!i̭vՑ>7G):Dʹ7K̊x[Y= pUuKe]@N:J;Cg&Yp#bqʒpwCI\6,% }ON\θA1HfRD`'r.--1DDD,B'ED,BE(ED,B-"bU""E(ED,B'ED,.,,<4؋-:4ؙl9~k4CCCl褈i*ED'fnkZDD(kmXCm*lcf:UBX[D"""E(ED,B-"b lP`XDtYn.]P JvTsYbU=g?x_Z/ك7M$m6joa$ԍ+șKvi[.T}B"Omv8~j]QY 6|Oy X 2:3QڠEY8O<6>o~^ Ax&5pSnsyjoj~|\3[DsUF0@5SBNY|eT7Q 2b9߁` 6L]vde$>b ,,A\B" 1 ıUy|x~zsXHXb 6׾z7a7('gv!2I螝J2G1K&R Jqgjd/%&C |՘DǞ|6&WOPZbާGE0[$ҭ_FP~1]fv,D9IL*7|F?F٨)YWA`ڑϽv6a Fl,2_IAJsCv`6- CrwCHZ%;Vdka>P'ž_d>/)ìf璯XSCSfsi&vU MgzO W2RV=$GŽ-'C`^=XGހ5:y,\h;2pr@r})OwClslۃs]"n~̫/s*iUl]^;U׎νknǾ?]<|J,6uer9;FƗô[sϲS"FI)/#<)Ct*) )DP^/~ͧD=Œѩ+=ۑ`/gX[dB(~Lw{kCR)fVBZl:C|P{'>AfvwzN϶1qoĞHd=KwV5ELzj<!S\'E. 8*_oi)~g*YxqN*lo=pg~aV#i)I >N\?=~''{ VsCPH{;΅K)%hɪMyCөڹwf}sxYZ#/ N&`4:K6k|~c<>/"qЙdTg)\X?nv/^I9 U>8#1-;(*mPgja ťTzɯ 2ug~lQt2VQZ\ѡ l-ʡ(2l$M 0qnaW DwI6ahjJcWm;Dy$T}k1~ѧ3-پ})q녵O'<u?OGDxc;nd/,<4àٗ}<GWf_|kM 6᷅F#'7K$GfU>ޅC?SKK!W|p D'o6 l"Y:g%{'Osf sH:wNήpN7[6jJC-|'lX//i`=2Đ*($UHI\B8l+$YD=L_ׯcsn)վ~;IO`"r\$a%6.?*7&P+>]`0A4{_CE Z05ĄANe5>d;vf6: r/1M8[M 0u٢ҧ5ٵvm܁^3 :b;$?}>?p5UsJxl6?z'GkXdI $?֞1Bp>7>o&DvJa-cOIۺɌ:7{(EL[Ws,n22m;N`I!_6{B5-Ԅ`طynH!)lD$B%6i浉+g5a ug$@Df;Qj܆ GoVLS8_q^rF/⛻tJD੠SEY  =?/AZV6j:vy^ 51[_1Yr:";=MZǭ[_H􊀝}:~v DO^@1I:4. P̎&ʥ(R쮬2 RDd,9YYF8+V ɥgJ9~+C "*%|jH$bl{ȯCDA60*'7OQհK"3v+ wSJm $!Ԡ]UąڅǑNǴdaR._;=wVx bfe8J zлx fq.ÝD:B ` #SgTqzE9I[?U|u[I]3̆߰atZ$A]q|=^Hؗ$ msC}R14KW# חu|_`79ϾJiT,vG0B:s'|2s-f[:GJ G]PLO!| a)Yu6SA/P׆#FH"=C<m[Ϫ5ٞWHmgaP4\6һ6A F()=3g;{*()*̅%5ATb=-j~-MmIˆ"o֬Y<۶'ysBv0@<'H>,6$KBޣw9ok}OA/H9k F}y7bo2 wTWg Y ^XNjw=~po:eizݻ(T- wzneS`X[D"""E(ED,B-"b l8?KDDݟRoف0U""hbŊc= A?w}'4ݍ\DD0O""' E(ED,B-"b lP`X[D"""E(ED,B-"b lP`X[D"""E(ED,B-"b lP`X[D"""E(ED,B-"bAn0''דor=0 ;;@CD޻w/+WdȐ!DEE~YY>|@\l,#GOvY-n'MtLm%\wl`/R݇ގ>D3?4M,2Oeˎ3I}qmsY09['Grm+gqVʂ{zW,d73Sv;"У\޼}oDr5f yWgSG߃<-y_;Jp%yi>0%r%t0p+8'h~" x`Wg{>{w#i2٩|DG$'%e*K( _SAx8?N0kf='LJo[D>^/a (K{Gw'x啗w7 fG958 ANx7WK^wOR@ъ\y]C/%f#*#/ O}s=LFPE6b3^/hfq~⽿>7oV췦D~6GO>6FuM5_(v2i)]ȇ‡gpU1yT7V|=4@g&gk 93(٧=# l/rjtpAftLTx.n|}g٢Կ/R6>\nlINMf{Ψ00Kyꮄ8jIgs*)b32iS&HMMMj$$+'O,>­큯d'yU,?hÞT7҅JaaVGƄt!qx5{ N0y{dN:2qalR5(k'_B#o9vZɔ O3 2"'cͤZ#CN=N\q;OO'&]AP9 iSM#UyxD?;6 a87>8mcyRgBC/oguQ9zq\IOcShӆ̶myv3$'&R]]bG0)jempv;k#.lq٫W{K6+׳5|Ip{zvcxa'TF@᳹Yn'|Fb|/SXy-7 }GiE$ zIDATZBnSSS%=-jrf; 7?;+w8p:w|D$%Wwy[NnFPyq/U!qt|=?8ONt@4١@uo)u?sg[D64M46o\ aZaC]fO&AZZݺuӧ/1HKK t""xzE(ED,B-"b lP`X[D"""E(ED,B-"b lP`X[D"""֯_ONN~ ##lVh`ݻ+W2dZ\7XdQ s|nN{'iJ@D6l̜ Y%>.+sψ 9n_ߍL)'sa),_:3l`צ;scμ5q9p$v mPnMpv8Wl,8玠wB~<3aϽ#2 =JG&@D -w\s aF ;Y1%y<}mDUnzg/koQ~Hz8kgx-1t8bn:m%o+_bG :{x>m݋t<ac+1q_88Wx׹.+*s spK$gzvЋQcath]$҈?.O=lN=l8 ǃf3ut4OLrRRk[ vv?8y) ŚY0yM&<u/N]D ⯘ԧ˴ٳX~É'?GԐ{C|h6>_sb p`[mw(GӑF X1um93>^g_@D} 3 H>Kkt2{cz*:ogYٺlQtߗN)$&ؼ-pn7s\K#n!t#bNUO=9ShrX-`>IKĩ#PiTD簧Lx*>;wHMDRb"555^}< ~._Ux {RHFP(AF<:5&4 ,'܇믵Bۓ`[BaOqt?pR08" *|ڞƒL~5^5/紌0`OYQdʄ{}TUUINL}1ù4/Գot# 6+4[n1M#cjr7P`ēc'e1ex;EDsùn6>g!u-tQ`6ȖuTx^\.mӘx2ڴ!m[ ɉTWW6#˰wF\&0W!>2ldW^{gk(:Kr6yyX^ }/b`UlA~E%[3sg^Bh[I\:G3?`uu\]J>;%vGhD(6_#ϧ\~\JueWj/9| c۩sflt\ cٛ[On yc_ûS}>"ےTЫ;ہ=y1/*$ggPr0"w]LQ@4C0͘7F-.îg-6-eg/3os15́\shCC4lq}k83=$ק6Xh/9|=tMH*tYXaPUT6TfѢEx\ aiii 4kגD0HKKcС$''r""'_%FZZZ a#DD,B-"b lP`X[D"""E(ED,B-"b lP`X[D"""֯_ONN~ ##lRRR= N@{޽\!Ceee<8YNJ%9J@{Æ 0^oϜ Y@B||JWg%[) #s~u \urB_&:k."""x|@\l,#GOvYMoT988=;䴎 L)'sa),_FbɊ.y?Pq rzl%&0 = t/asy}& !(. n['TnzNV_I}(Ǹiw؏WnfoPd䋹#Aba~Zώz1j=6MwX*^,HIp" ]y^y,,,4{h?f~~ySrj|[ho[9_g_u9*ro{}Š?+|m~n{`4,f".7xwqoWlVhGC*5ʼwU5d}1/yoֶ}(e[ܳgscniFmM?]i>V,m>_ap pp0dIx |ɧasI|DEEIKMUȮW2foPxn&˥ŭ-dMPI?!I)Vagef2eC 2"'޿n`shoSZ0 <(=;_'-$G?+~ΏDY֢岧x;ED4S##Y)׋MzOF6dm˳!91ab³/}{y|ޘ*;g 82&~WUf0m,sﮱve=Kh.vSS_KKyV۪~UlA~E%[3sg^B#za~vT^3}gu"P~?6[ yMX|&]1M= ba_\\J4b>vrr?:6]t<,7LJn 5Jl tv=oϑdo9{Ni;.&_ݏ( ti-Ԡ7oNTGճi\.rrrbGҥT.kf}t ny}9.1 pUuKe]@u@+l-Zijv;77aÆr""'vZZ bڵ6{20 :t(Ɂ )tLKK#---͊t[DDLka""E(ED,B-"b lP`X[D"""E(ED,B-"b lP`X[D"""E(ED,B-"b lP`X[D"""E(ED,B-"b lP`X[D"""E(ED,B-"b lP`X[D"""E(ED,B-"b lP`X[D"""E(ED,B-"b lP`X[D"""E(ED,B-"b lP`X[D"""E(ED,B-"b lP`X[D"""E(ED,B-"b lP`X[D"""E(ED,B-"b lP`X[D"""E(ED,B-"b lP`X[D"""E(ED,B-"b lP`X[D"""E(ED,B-"b lP`X[Du-fBP#aDaÀP (^D-AX`Swڔml{ED~al7n@`{ jmEDnT#-Vյú>ED䧫ʮa?n,=脥HmrDvðn8mC-"('3ê뿷spXl+"">gwïJ> T C??&ChW UUIENDB`parlatype-1.5.4/help/C/figures/lo-menu.png0000644000175000017500000015122113171727132015311 00000000000000PNG  IHDREcebKGD pHYs  tIME8LS, IDATxuUކvOw  Cw J( X`1>;0@LA9*;P.]k}aa \^w-, ӦMcҤItoooAA͛7￧[n#  (E_z"AAiz+]vEu AAYI&I, pΣ>>>  ۢrI  6.y+8+<o);)?c G%S$ BR_E׏Wp&ߧ_8ylý/:$,"yj  >TV3+ n`ʚV+V+.;vbPp]ՓW ɈQ-fۉӥS$ BâU:z6{hӅJuݑ1&sio;s@4<j‡Oq@A΢⧝i8}"6r]V p:QP}GaH o,ÕS ʘkN.ʎ\~aOdîo_)A9):fѯKix@6=RH޽e]sI[cM5r}ˏw-r~ #]/ҧHA@AUMQՐh8\j(HnLۉ]Zp5.W墫F&/-ػ`:TdHABU)i @l|Rt*>?S\<M:COd! tM})A07g~%p/A:R8o 1&QyT!@>-XBB@b3(2Y@}m^D ܌ `>} P؇N }*v1pd/"L!ua,m3dQĘ~w"'͝;`Hի8;#J~~ (&Jܸ]wiÖbmŠ;)*b¤)),ƥb0cp;8wيl@AUR]3`21TEGJQ$ ,! Ȃ  8E  8E  8E  8E  8E  8E  8E  8E  8E  8E  "AA<% Ab0EQ3t]!TD fnP i>AfY!*bX0WD ooo/AQ$ }`0E  "AAD  (AAQ$  nsع~+5 A(s?9 6}Z g(*\2(>ftzkl+91%,Mu7~l~>DE*_u qC? uvv}qQsTY]T̋'ӖXE9לørܯ{kZKK_ıYOfĥfe~l߿.{_?{J|<}pn[KnSS==kZUQmSOZ*&_4;$ZjpW{I akiO10=]U͎>w:~<[:e<&\B4I8LܔY|MqZ̽OƷWY[6zJғ} |E~ fPșzlc+A7Op O0/3:9I]̘PA)p"ň- Jb/YUacEwdrp: wMo3w&6+{0n-lkg !U`'L9l++ˆ+32|1""<㳦JP}IJvu,}tuP_o|ܙ]F |1QTk{t5dm'K˾qםpzu{"+>7s$csF{" .{n;O^1Pԧү~Kxŷ3xU@s#` 8qqTEj$-~>o]A pͽ7>f#81}{ܰokx`}mOۂ~Owo~íVd!0$iJ G|2vhY[=1BJcꀍj*L,ߪoj> ԅw}n2ݾ:owtnMKU,hs3&}t^Տ^), OirF\olYenz+m3_^ui|>wo~-ôe7(j7GeL+qgCA\pOk,#i'J5Q&ܙ%A2ga\#VcjF)0tҽGq7.Ŏ^ח0)ɋf RߛJ %|q ]uyCeO27sϾ<핽|<:+ $$ o恙0?zS൴bՂWs7\WF]ޟaƋ0_m\^U800+c&xg&ؘ@_BR"J[G`?諬絫2(v}9p~>+fYuil٘zCE8b4̣֬XCB?HaZ8C5ep5yIo MIuBܕd,oOgbK|pBeՖ&$*7Qz&L'.Os3eӫ!6TV3m&>7;ZhAqU%jP@`!j?tUO'cRBPq֏-i\qe$떑fnZįs/ M~H!>.aD ?#FIO(1"i[v+O}e:9]UyCg9n&36?,' Y-Mh"Mˠ&L/Cb7SꄏABFMUU5P|hգ;[E<ȍӿbC~.06*M#/}m+bhs+0g{_˸u|d)*(Ԃqt`Éy;NDKFȎڶ^(^WK4;O[hf: 64~E<}VCLB|L|ݻ$nQEo•@Jq PEXyId\Ҵ5уդ; $6~̧P_ԒMlYF+04> o?IarR[Gvr/]{uepy& o'_LJOSh,% "(u{IY&c5EsopMjGOcW֚xʥ8zCB oqH*@hߋh=kVbMj[Oxp">u[WqgGX\7v7?1 ^zAԼѶ{-l Ϯ?g_61#L?x\ŏē"5Y8ő4݇oC/_1l>bgRXibOJ 2bԫ~x.g;_>y5_d'n[kʀaci>Ka$s\{T s) 5-ȓݤ43"4tM ڀMcN$e7bn&p8~kl#PEqNYYG?8uPpE}MǑ\̆ݙe]pzs>#!"W T ֩|93ۍ!#w{Q":4 Il~cն$fZM躆^OZ7;i& ͕}vΗl(8c_%'ҧެ}Gn6EI0e7}5 'Z.{6l'>)Ss<զQT/1y̾e8R@z ?ajQl^ݻ^7na_R͌L 0pwt='G`%Cim=8 I9Sʷj˯sE$K yq7MXqaO_Sx.h! AP)~t# }XkN9j5epM̙RUWVg̼?ŧ.~'B5B K4pt[VV<3^F@Ag#Fr?|dnL kMT]9.Q*6]g#t.}g"|&4 Mi>Q$ HD nO  "AM$  H(D g *D p "pv6%MhY)*z"AYAT񯪞],F#VUp֒~80ւ IA8s4]E s"#ύ /6.Hs0Ȃ XD RVpA83U(AD8E WD rA*g yYD qpb ,Oe"A´ӍVޟ?m&!|ѩ0&xc-`yn?XSߛ:;xOx+WF>{w>CnL4oՍ Mઋj|P3a{iĩYxU~|jmQ{Nu[ ٮ( z);v:.NX,(B%RAQ& w=:c2d8 c{寺`?;3q;]mOA_TĶ<7F$ZcWg3hm" М+g˘c;{ 6MQbFG,u|#ɹ%'` *6cRhfrdQT~V6QQ]ٵk(Baa T+:>>>nvIǎψ_f 1 ufLLLqulڼNaѽ'{=c 7BrJj]0ol &P;廵&ƽuE\!ńPY"25xDGU6"c/KqiĈWP!! g[@0,/^%7MWi߿aDQNuSn _Ns҂&)~ىrrI&udLqk:/4~Pq2_E!//:@6mt}ZՆM73^~DU’Zic~7-\v{<VKȠ[LCt~z~w>B1?BiK@(Z* V09b;HwfصLh=K,}yq3%~Ow` g᫙v[xmg`u Dt)ELOfC}c'kt9+|{- VT{=͛߬#!דѭRm sC *{ڄyDgH,̥o1T0;%܌Ob~[ϮpO2?jmIUnR8,cjurrr\Ջ@w0LTbo0N.Qektxb@44tQEe/_% 9MCu:W||9t[Z:T(Z}&RZIee>r 1u*ᏈKR<2ISo4@#~>pW_ >bp=Ddd$v(,*/scrssEUUͭH¡CMC[3I|E& ]/eD`*G4GO\͂g'X2s4jg;^7ÒX2(TKbxR;y)Bؿr!~QTڎO|2O<,ݾ~ [3 xdKoyb.E3y͔b'6mg=4^Ovv6PXXbiQkrGF0n˂?n`2&ѧttZw6śwT(MJƟvat9r0^InnNhaϯA=}M>~<ڵEOJBŽ{ł BiRAAa!N:ҩS.;-p|e; O/r( 6܁Jl2@<ѝM6p8F232IKOd*}`B0)Xb#k|W̺}f]O屶ҲQuX|M~$z]hC-8QV\~ޮ]3Lۛp_1Fwk1x TUat(,ȫt[^NADY6 QT4uԆVrW|\z8Y_RFJJ _}a&E)_ia*.R>}1|Α#pc; IDATD .B*( ъR hKK!l%WM섮DL# N`BBD} vc0df L&vJ=i׮-& H~^&( ViX2[ i]T6ގpe%in\~RXu>=fC˷b`DCH74mH +c-c{b2 =Le5sdU KILm 0Vfìl&4SgU}*;a!MkCd4q\JQQ' PP֥W*b*}W4]ջ1 w74Fa~V|H.p?'P#mD)8Jijzi )//ooomF]҆v :*]OQl6/6oDi_&NQccL_|ul,?>v \z V&JT~p;p@t]KK`?;P(45"R#^M(dAd2p\(Bqq1ٕ;Eb]#QE1,^`ҞPۈ5rspKKl'/GŤk!˄YcBCo3z. J7{a250a??r1y2@O*L֮w޽_x%: O-m:Յ \<E9KcgARA'H瑒&0П}* )RT\D=*̱iA]{)qלa;2.ǤC X,yʊzq/hEIOX.zNw1ē1y%s篠mywOd@@ $Г0ňMex >{P̓ki5k:~k \vWZɤH`3'do_k*r7ԋD?x 絰c-N*h F.yVNdߝSg3L{wjeoUac{wW 1TޭDyoa/1Y^FIcx̂B[fGYք`F>ߔ!47#øoEvcpL=Ȩ־\'E][b3^QiPTXPv3<.00l^ 7{VeӞ^h(u %M[,Ǎ7܄;q:9EaX,X,V/x~}h񖓓C```USAdd$.Dfsq݆ 7gx=GLڥKy3 (un;p 0[ē'wivJ@Q H&a 毿k8NnNzZaLj"͇nmD%{O-vƧit63f|}JEoSxA1&gNJ>Ns -b{|0;>g F̿?ggngfV4$։I"}sg?j^S4׼6KX 2RHӺBxbԓrdf2k1'Y3YT^)ޱ~U,0C?G_< 32Ѽ#2h<{ %SK?n)A|g1Wum5CS_mQU\麎q%33^K,eɷhFQ ^ep!6m%X̔Amy蓕zH|,.O-33ypm].dO`5K#nj_np:& uN~ą8 h\]z__6o~D\64yormLv}F/`@Uգ/jbXp\FF#nES4绕.QXzm;!s\%^Qf#k:];33Aq*SO{l~M]^>>^V-s!m]ش;A=[t(,*uwn!ӧt "33tٌ`(\(e><0/;mQpZU˿XHqAfa0(hEԄn4w=T]DMku\~Czz:'NuiBq]e͐*DyrMӰXיG5].ω9D.J߂AeۦQ2 T܇0ĠU#@vKjj EՊ"g6|#@7t7$9)lhõHCyh:~C\.f͚I;X)$ez/ŝOysH.p%ۘ?}6:i GyN\lfGkj OFEEEl61GST:wGx41P< vMCIZ>>yDժ499;.C=S}Ttxv{[TU|.:3NQQ1Y\tXϬ7^ >u.5vڳa: F#ڧ߇džݻw (""Cvc3LQ_,&ܰlF^ÉQ&٤(?#Νk݅J>^IL kÆoqkmK;H [$Wཟc B3RaOM U/.R\ ;5.222ʅQII ^^^ddd2'o0wB1Y`"׭BcR6tg~V\9eMVM`HV橬vٽj19G'=D楱((DLKj(dJJJ*P=_5MvP>GOIIIQҋrpgpikO&\lH+p)c0EBZ#{1lhe](?rZ?F]׏YM6bHӴVuE``о]g q8(rةoYٙtЍ܍|bpk߾}ǗwĎl6`0o #33tr Ky۵Ýj-F#)*ui|87:!!~aqHKFa"  3hb 7;"~ZՕ̜ ,k]2%N ?$.%yyx{{ѳC,kvnB1kMOZB*H7bGƙq о=Q͛W9 g'@(␐2qYߑ6၌X>ˠ*LYÇݧw6JaS=BBRน %mCIٻaWN?mSvqvӴVuE8].Z%=3g(z +fM\l{B߇GTt㉍P6|Cc.(  u\͔gإa4~D]EQm۶8bc[믿c4=? نS d|H^LNAWql8~tzά'BQyx:/uR2sUdPؑDޥ}9A](!7;\@+=9*􊮑^}0Z kѱ沈S{DgDόҕwT0RXP@18K0'$c%@fV>>j *.j|EiN2O\F\ղ<djYX?| n^~ֵ̌Ê.ͼ iӺ%yxyygGWs37tӂ G~"3c8@~JvA3 `ҹS'ZDGʥ1 (BFz)ɉs'<Ex?0y|-Z>> !bTTx*x♦zȈQLhki??(?3GR+Kt9iۊ_.d4PTttѹoq-)KZT2p8?e@tooZǙ?W#?Ӎ.)vsd$)96C߱pЁ (e>ݤW9]e|"]׉nۋ>}MhD PK2+R6Zf w1Q9o36愷بłn/GY^1z,|㜅SAQbbZ*o|*m0?ICl8i~)ZeN_~=&<:'O]:@EAkLˊ.͑#8pܥ9N߯icu0T#喻4-T#daǑ\ ;pоօ_3A8EQ]0Tl^6bEb23߳ Aiep:=]ź{u:˯+[űg4M+_~gE(nWy*yT=xče񈯊"8~d\cɦi8c& /ukٿ@ڮ'qiZ ."Co9;rX().U&OEFDDop!nw ?|?sሡZ?JM B墨isaJJJp88]NvNo,3& لjEt4( f. 0,|S%008fsWڶm˾}'8dYqq1_nݎ(tԩ^))_ܵ.h*Zf--ZcXƥ9A 7C(,*bSj6ă gϞΟW^q%?x?y Mz_7ˊ#;%h((mӡ^?gJT< %xQfPO듉_&SIuui<0l:S=fqͤɕ:/ow[ 4%YUzQ >}ɷYL?fpwҮ6L{e!KXOׯzgӛ[sdc ^ȃ/"2>\] #D )A"= fWOdї؟[c(1SD^59v6YKY.[å-K7S?[\ߕXܵʥ3&10 3v@>{'v a:%E.J)]lL-sBƘ 5Wg1%S$t]eeY̵ɤH`3'dc-qM4<6kr0~ ˗"39iR&bך5\;?Ϣ;?[Xb#i.yBՂӌЈS$Tp]o>$30 GԚ5,>|/!)f6Go`/qŃ3"@!Ww~C8~Xsފ6FPߞIm$Ǻ UNjz*)UO/{4T(qH*;ñ4k֌5jk͋ȈHCk<=3Ќ)[MӴ Wsqa&og1; @͗HIK!3+m\zmJrrA~azpv ,ƙYt &dfeϞu"ϧ|sraX[DL< Ԏdv?EIII$9LtbL7T.jk?۶g5E\QT%r΍N-#<'.{G6kvzʣYΌ B](*."8(zQT(!<<Wysp r(HzMpת Nי-ʝsBH-|s);3xGt;fsXΈ Bs֋"EQFU™`ۻ}~$} >rԣ,z~A{w.c;9AObaFӢckڷeXl>K6&HA8{Z"+.7|FNm } v4IeϫrG\rUt=)]g͚5ׯʈʫaDE5Iu9$ pfvړ׵vu@?!+1o Bav.Ey?ϗfC܆^Ǐb ]ɟ t$-rFӊCvE 9P^՗ z_/m`WLIJ;a?GQ )6 c´ 5{z#-𤠮5 (z39}i#*D8rl߱aE^.о[m#Xi IDATewx :F~fši:{&?yKDpT _91כSHA8_+>{|:::DQ_)]tJaЈ~޶݁(e#K[r:FnĝtݑOѹ& ʜE;iI"A8XWĴhWN.~*q0!.T\P7o㇒y(DUTTU(Kh)AS&1 cN2%r|gV)S]BQqg}fkA@;_~])is;#,&d*jxh2.}W_W2 mEn9y':  ҳ $:9wӡ_:E1z5 6VI2 ͬnWfc^³W\V7wMx.?V!Y+ cm)H:¥N6ި!L 5WUqUq{?}ʳU>QOyR\"A87]uŒ}Ν;8f3#$8$RGQ}X-هP{NE( (Fi{w=]_4c "X5j6ԪR_5jQVQJVZh蠡(UbT4vDDd|?d'4;` ԑDԨsV_6Ƿkfg+WՍ֭bcmp%$=fO\n1ayz/[Ciyb썵PϤ&_oM[GѓNJM7cPd`'Z_ LߏG(GO7Tj4]zRM$ĢV)RߏŁ ]O`슫pӋ/A,ZMg5!'H=n%Ҩi-<ޙYɕg5ʒpazJ fRT$i=^,5^,bo(P9ӱIp>fҿ=r'=S<zl{sL;l"3FUvFI %U`k[y{r0O!rcw;s{=/U4Q#XP\usLK޸jjtnp[lۑXD) ?Z>ķh|'~mhTe G72*jJZFd[m%8Kq\U3IKքE%<ۃ4Z gi3^qG\ӡ/<]UޥvC_i{;{f366m++ 7͹j3aPRA}j+KU73M5̏e=)UU`ڔ)(YmTo]-tC>ѩ'+W|_O5jҦ{K^$\6oB.[[u3UeDE6|ÝKҕl DriLJZo(fCZFؗ.;dOvSj? 30֨P @zo-^Z wCof#K#ɜt+YկK>id?=)݊%^dP8?yPaTeډF=`gզrXׂe^SeL'%ug)zhiE;t~Mtټ;+ߪt <ǸcH_N`fm*]z0F݃u,<*v V,`J[gފ)*%Nu,HoIxa,^2~򏜽_0EgϵugۢPY_&Nm{14peZ8pt1n$zplxW-bc\I;y+I݌2woxq~gg3, y)=z<؝K ݖ`ȓk'Σ>&M'~F{'xpV4}~%rرT  tuj`5ʡ2zp&~٦yVHɫ7q28uN"c.1A$8;4s`/$0v)X;a5P6'ӊ??30&K.(0dxAʃ(]l)w}>]spFKKKڴjH9EtAQ_6yLvisr3kS|hrG(e0c%3/iVlLFh~ N-CUqtvǷ%'pٽ%H݅1,ӃESK9Wal `nf. 8YwpP&j)Ӥ{O/sU_e,9dlaܶ̀oP>kZmN%Z9 :Ø?mT!_?~={gy:AQItT,vIGicD Uzt@QVhG̍ĆG$:*;aY1l >*{-㉼~_7ƚ0i/\ӫg!/[ ;ܸcrp{g>&xK[8wó.;{ϴzڰ" +U,=eJ`e玃G#_M!I焋c}+l[*ySJi͑\>=bHdbS-mxe\ w[^<8|PMnXF-;wp̃<֊N#z{V^z!f\(e5jjtiu@?4'VVSp}Mcz)`A-n,^4I";,$|9->5b^5Z2AF%G1Ll3:7jP<*tyu|?Y=Q^)U9nWeEP{ѡRvA}ܬH;t~^.F+؆bܻE4nTu+F=#dca[O\/Z1_J^Ҧ m"NJol_WQdPK((ԭ]?O_X7gS[<$}ˆ j){cN#GNQZ94 <~&o|'P]f4&Ei:L2?t=k88:} ~z+jKnlڍȮ>t%h䲑x?R?']un>@:elA@D'ksJzf߭0o_TgѮ,2)u2EƓfJtnvY_lpR44/Q/q!Im#旷xR;/'>mNHpg(j[7LaHԦW+ XGꎥq&$? U`,QINJ%7vBV^(畿!o&mNX0̤͘\D|Dg//Bݦ[U^{B]z6vE]Hiw}Y~_yh-x ITDf/R:>;I.vҊ}:׊eDz_14xbsc^kro~b$4G/OS/-r#ӿ-G̠ ;[8r-BBNS8{7;!5e灃G!.& Mdfs'~-z-o-ΖvA{VcV)F3ͤd9i~w]ʺ6TE6M~sogv8?&BiK6]YtKQTٚ`HtD =Zs:J`لY7LB)28n3~5Yy3zVr0+t3)_#vd%GW<q( O뜷5k3:gtbŅ$i<"[+ȧxX g;lpqȨX"㈎K 2GѣGiԨ?q-x/JS1sǨ}$ogvkۯx~W^wt:.{vqn_->Fш`IBAW\AѠRP?~F=O>q5Xyڙ̛ =\;w#'TҔSQf|OL?+*FLۼLͤ "ST2 <VLYV$|ǥ`T^`zZz}qڱ{, *O:ҾV;-lA_=qwiB$6hMq)lFCw|Eqo.Ug<) _ũ}I[,$`dUPTRbU9VVV܍crk9P% X,en_ϣgeES+Ó*U"ݻo%K8:8biasR%KIzNv2HGNN}Pls$$&H(,1NNL&n"))ZXXP³NNҖU ?)h4ұCG!@?K FVbr@KNN`x.oZ%ye20 $''K*m(Kݥr($_ReVZB!@zD!r/;h 0!e19 vV\s(mx嗋6-e>EB FZ>EuPPM/]$l!)S$A^祌BC5n}y%tEX bʕY\qw+pYnĕۨ^T(N3s?wH0QٕǷ};ꗰ@"x.Zl'U|%=EEFgS(+^EK m@h@)cQۧ jkwn˔!SRɚ e*3l+Wʠ3ܭpXO[M,_Fѳ m իQ^{NM4ؗN*lKp$S1*P9K-*}B'}`TlzGf=a'$l-+A y)Ѵ>d0v #ནPh8+^x;ӥqݖ`ȓk'Σ>&M'TY}gǓHƏK`j댝d|_@C}5C$/r]?ܭ8,K5f |! &6gm)tġ)zve bh*ʴpcHfᾔ|䦾LqӅwz%J/NBx@x`$Dqe5C*Yg0iTR#oL7}X¡uQJ ءXQm[L]ʶ+x fE=`L?YdI^˻Uoډ&&&b5S7^&)c'Dg\˲~NBF+'Q fn>ʎf>b݆ |=܃f0p5,׹֕Ykc$Z精5eUbGkٶ~9鋭HP$D~" %u -EZwA IDATJ{HfNF/5nx|S\mlGn+wV8`\}n.$fsqjr&L7;ӴzeuA '-veؐk{d0aiɫӐZ彨ۃIӺ;5Gb9+ڑ*A%Q宾 7 gKʔT8yfa遰ϣy)3v_cEf_:5Mi;<ݶ@ 3`0 d#Ky*\fJ>7c g>(h1YV,K|w OYrV_KQLʖ C`$(lУ¨e۸kνI a(MS Y" f-b}VNXi1bZz@r&q45[xIɟpU6fS;ߜio [҃R\t)Ǐ*6m47eI_?iCEBܖ1/r[/fٌdh4b20 0GaԀvPڊ'9%6LLAup~ܴ6j ;DZGcx8Ec灃Gޡau$3.+U C朋͏> 2}ltӸwnrcosp4Q0a^'/%iAʓkƻvm%4]Tٔ6EN'}qxp)lYDWTtt4J2TR( +^eL rԑ \[0cR6dN}iy/:fD 5?&s*O]xZǧK]jWdbɨc`|>|.><0S/aa,5bQJ5[3'gApm5=ĠtAyrcZړ|p!\ΕjGllKRnMY bcj㥘-b5RxWjPt}vPm (ٜDFFϋzrSta1T./0W\)"L!xLD" '{]hBeOxAXc1$|^HQEB!D.@' u .Gp1+ 1Q%sS$D"sB! EB! !BHP$B!AB!EB! !BHP$B!AB!EB! cIhIBHP$ bH, In_?{}g gY2a;om} y B6^"aTK/"!( -ΎXRtފkf$/!ABB*pP\Cɣѡ%޾~v?Ic`tjo%ǣhS[Gr22҇S#5o=9?ݢ;ocÒ" |ʿb䕤o_?[`Ȣ}&eYv探S ??Gnwmҡ_J>|MMKHP$2LJqևSm ª_sQ9h8OV`/ٶzdh2jm"V3uepJtfʵ,ğ_-dkTm^m_}ΰl.SWlG۰g{ |:ݺ2kVvlDC\֗6`޹J h-/7} & !(4nx|S\mlGn+wV8`\}n.$fsPpjr&=oiZ2֓}ӲNyVlH=2UvTiH^Ti#1朕EHztبrW_Xs̅3Gӥ~eUUdYI!Dѧh-` /s3>#R$f{ ҬBe/+)5ZLd54]S՗>w%*%(BQҖc Á^Lhk:S 槖pU6fSuN7niZE' 9&gBQX GEDn;DTn~iYt7 pCA'70 &o[tTw g}rsG1ƻ׮q6LJ\^ ,ٱ(߉5Y3C6!8piN˖e=˜Ȓ"!(,lȆ6Ww#W]t)I˗v0(O{*\[{M31(}PT^t OMv綧(}Г !2 F#?ϗ=%]»Ƴ-/gL HLT^l6R5|VL&#GB"H5r(Q=s.]T(D*ЙEB]D*U݆ $(ڿ2Һԩ#-E"τES͚5gy lPu4ZYEeN"oh4 5(*6wNM!yQ䃢Eig}B!uP.BE !BQL$&Q{PL)*xĐQ#9)G1}D^2+mܵ u= Ŝ[DFUwmo3b$q@ s7t їᑁl|oMrmf֬^qʐh_ $.9ȽoQɶ1׈0{Эe!AB'"'&-dG1Dܩj4&e)Aڌa.l+W2R~7tya$-_ڙXk֣c߿<%u"!dz=DDDPNe !o;F#FTNaaY/{pVll,ZZFR(ʃgJOBIŀD♓H! o_,??q" ֶrh !s z(ĤwR!B"!B B!$(B!H!B"!B'?Y޵Z!E !! Nl"!(\]](bcc ,-S$B!AB!EB! !BHP$B!AB!EB! !BHP$B!AB!EBQd"Otmo_?CSIa"qA iޝ!BdH}&D3CVӇSSmBřX#ԑ !DqgÞٟplsZ?~TQVRCB{ S&xDŽ/9mJ0.m0k(:ûU?|WpQ.+ӱxǘe# B1.{f;JاZJГJ7'HeK֯3cl߰2e5FD\4'+0xl[=VkywAҒ0߿uZ&ZCVݩ~GPvDo وB"!u|ѩ=jw:/?|MMm[ҸvEעeT5r1g1Qܭ[}+〭su:cO].[ܛһ=l?O<|sL@`mleb@ !Da8CuAc ^hQa%={3>^3߈%e4$9.CenƇqxd ěĬ:TN4Cmz5Oo㐮K[ !( :/:ڥ #Kk3]4"F.Lٟ1~Il3'4g^m儕#֯eW7+8x @=ǯwqhD199*BqZT;GrK'a%Hy;`F7x+{7ev.&]4XbBhM}G,;Ag ~ 8tfk[נGkXھ:xB"!JWiR\f{إi:aJ[=_KׁU]XդO'O-ct)fa U?!iIT#\J2 %22n^fL&dz=DDDPNe !o;F#FTNN%evp.Zbcch4jj5* EQP_)mY!D$] "QD6d!7o_/{aNsj7H#' E`6c !Do\evrFE+\[.PRRB\Q|eTx~д&nkۉuO#BQTe8 jgjTNdRɞUgB!-9EjjHέPRB!(AQVTh,3!Br=B!EB!)5BDDDH%Qt7G"!\]](bcc ,->B!H!B"!B B!$(B!H!B"!B B!$(B!H!cIhIBH! "G~+Ӗiޝ!ɐp%1Җ}ak-pSS68c=ßQ=dD">BBNy>8SgK/SƗkuBB.Nnaơ?8ꂯSCWΰwR=ʹ/g3k[y{r0OZEB!E+ZxoGCx2TiqpvcX8թ5RbD?-f,)>HX%gBQHŕ?d.ͺRӊ'no󔡡=h 挓|l]ӽ|3s0[SE3 l=-?`\JZC`QtjwԿ'wѦY`;a}?i0m׎W&篘tQF2u4+N`կt[L6cyjqpKwp:.-0|F n퇷oe_S'vpv׏-vBi .NMoO _r $Z~wRBQ1L@Q`Lv۪ӯ';\HwYNwp;vUNO.b`so:7rCN{>W88^E.x_DbԱMU(1W)UWm[_0f^$P[9a-LjM8qt%/GzH?"pE=\+?ecvm%4]TJB59;:7&0uWE γavO N'}q6fFX`5sf0IP\;B{i40K#sPG5چ+s;]ǔC:5y=7,cL]zYt#gаB uNʜvRПz}S_|-+VQR f#&3`)F7;;F*7] !Dg@6rtzڪ2VAXړ|p!\ΕjGllK\UUMtd1P>]>]TD #&;Z`٘8UzӼEߟfWʕ0oʲG\NfrŒc;s {Ů ]z/9JmYÕjoӦ&Wu |(YU-V<%s^W| IDATIl7 v!Ź?#A-K:LKX;s czR֌(/G:WO@@-?jݧzRe6c20 $''ILL$"":u,[X~#ma41 rta14C3qA yN&ϳijΥ7yƢhPըjT*(JQ,!SDĩ;OLh? D5!(}]đߟ]%:6C]Nj.P\sj7H#H!gd_}GAӽuLdw]z 8(nEB!Dۉo;`m+ ·i[6&O= !BHP$B!AB!Ep\~]*B!ELXXTB B!$(B!H!B"!B B1Ӈ$4ޔϟB"!(* ]o_?^6βdv2g).!~xHJ"qTr0t8?H~19*:b_ADZz$(B__1rNuVa]SEEkgW\] %+P<ߎd}P?'W*oKS^3i! DKT.4ӆ-aNOKߦ[ۦ)Os<)1fE~x77ػ`8Z7ۿ==&|d`TNQe7N>ϲb"~WNȒ06JԘt<LoхoLÁ>OWܿ/ve[$g \c8m?&d>Xw1yw<} :5O,tMkwté6O !De׾UG /v(ɪsg?i]ʄS =sQuq3?zs|:3k\p\4g2~Xdi;ϋm4!j'nf46+ .Nʈ?PMVmΪGNӭKY.â;=Xy1|5F~9bԈM8^v%f]~4juG.pySN3sֻ'cnԋ;c4 \Zv8I !Dqѕ(LdD,u~^KN=6c~gLU;:owv J'C@@)CGH{PAx""HSAP*) R M!lP$P>v3\{ϽUjT"ؕMOX$ s[|毷'>Ѵ}8l[T3f+fNV )ݴL/ױ}&~eԕΓ|ffEyf@G#{Wlw˒>'x&?Y?3p/ҔVbk 4 #Y|('ʤGm!~^!Aj䘈zDDZX#S,<Ôn1 e!L`fzVl 9|ͽ[3/ÔPR` jNfMWzB7fd<ũL/Kbw$W%99}ގS7@:6V➓"oH y,yo|N)q>'mB`A,)rDS$"J9ҵɄ_lbMl߲/UD[쓇\v㗐R5Lor}?bޢݸ%ӮI1Y{`IH"ݙ1 ?&˥ǔkYPU DDHeI*۟P ?fѿ ~3sKMq'LEr^NE7eWQMLڔIуv|BQl}ިJnY򽱤8] ,Q^J9pzZ! _nח_{PX% uر j; )rzI~t=]{raf y 7M'f|zgeTl>^U*T R!DD䁤1E"""" E"""" E"""" E"""" E"""" E""""o, rssS(TPbb[((((((((('+BHDDEpB ⧄LnChX&J:\߫^C[I0!Z{k:3LBő}]=Lz=?eyP$""Y^/D2f^39e ;1K>ŢLfTo(i⏫7:/Vo9 ֝,<ǢtNn\x#nFP$""k0Mږ#ax"^@R1cx=ӑn?7\ ncA՞Yy0Lt$MƎ݋de㏧)ڨA[(ȽB&y>xqtc^J#To0c`''4,2f],oM8'X='$Vcھ5_.?~K{9͞ 'F/"/G~"FuɓokodyD6i\7RZWؾ=.kU0,55Jc]=ᄆ5g쾴:}ui&lW(s+³ou$ϦL}{O~Z}d|(UEޝ<%_OexdѾ3z2|gqCČK6pys+I;^٤QSlX{ K&Tw$vpS<ո|}o>_%Os):}ue{yk7~36y {~,G icfQ vɂ1\3k>j5wL0w\!tw+M4=?gOMٟukQcvlG0s[nKKcy6 oLyJGy7wY)EٽuR0!D.^;`N=# sPLّn8<(;`u:DD$\Cnn cl̋<{g'^=hߖpɧܻ52L %UVAb)[Y9$&'l dTeM^͟qXכ'=˭s,eLmG7^εo ӵ("̓E &wvD)_ownTɫV(Vԁc3TJϒg8cewxwF2Sk쓇\v<&:߻GDD6ya"XƑlɽ` f5pt?":$>Ӿ ܨ=:~3^ϗ9`bݺ}$og.4=yiT%d'kU}G&8"?wA/п8,8ΥoW(w8SX8l4_m#'ٽi+.}Ofbk{ZjJgɿ`~ҹc2ݳ,ϨyRw>3%o )5dQ=ଖs-Nfم s(fqr_F5r*w5*we=$$:t1M:c*Џycxfz)HnK=`㬙 '<ȜkUqqq:SoklN'Fzz:VT, *T}rvl6*?(mDZz>\bb"...ff3& 00 ץ/?A]!@XZAh-"">YIHLǖv;qs[6)i6bNb5X[zN_HGDDz5܆T hLBBBBB|b" 77;." ((HEy%&&ޱu񙈈BBBBBBBBBȍa;گ7S]KJ""w3-~`#]H *O)e e7L=ů'jI>{&MW R3HxqxaΦ7P䯙@ޤsi]FUVerE/6Ťζr񪪈M_P$ɣpPVB>$dvk?PlY_.Wi$zVݚc;?ڙec<ݿ3C߳6]ji$vlM3 \*Ӫg9lcHD v U_I\.@j4ʯ7q£TrL|0 L HL;f}BDg#W| NFw仯"9mGY.K^__}kp.E_}B|䑗 a+)v0yLt<1Nj.DEDDo6 Zņ]8G|7KvR:.Ix4~YD+#l^ GkQ]&?< :qԔ$Y`7p0R/SvEr.*}0n$cmRxR"x<<{O\KK `yʢ#Ugٳe;ʇQl^<쿆qqqzSokgNÁf#==Jjj* *t^vvv;6 ___G fٌd0 >+g""ÇgaT"ۣg"""" E"""" E"""" E"""" E"""" E"""" E"""" E"""" E"""" E"""" E""""}&"r?H~SgIπքap3Y>u?ƭP<|;.w"#OVZnԭՂ!~V.`1b`ƼE'҂b:9s'n_KhztDD$#g*W/eg}u#誫`0ݰ'.VtZ>xҎ;3Bdv_4(| 7뤟f%l9t 60*D&mih.Yݜbعf9 >ٕCiܺ>%L^v'>vP&N7`(ܛt.Ӗ5KqҽSMSKC[9q)rGPƋûs6(ϽqQ(/!O dn5Jݜ>Jq=Lbc(t&9M߾^ [+'.:(G("""VZ<!6Gqd*^Y✩#7DB 6(1$mɶS/f SGw]&?uFՏX=2ΚW9 E A""w{A/¬Uk9\1%kc=/WrۗhWwA|:s~{Q2WIgnmpru1ܼq3QWdֱLV%+F 4hCNUsL< 9{+v[yfvz~1f$sd,q8TzM'..Y79/ G7|Wy[+LII;t:q88v;6dBBBn{_Dt:8-?%*W0'ٿW6Ec8K@ ;'rZ68'X3qWD/%j7;P5@ΫV _̞I:ED0 |+f J4z;8ˆoZg2m|7P;yK,:.v ֝ٝ)Vضq=Sj3z2|gqCČK6% ϋ;9H=E""S.+Ap.Wx}#~NhDS6fGf :VX]]\5\.x;0a6`fKs+M4=?gOMܝ`9*TڵU(yfLNlvd IDATuv;N;.pdBJblLg- ydގ<{g'l6ϖpɧܻ52L %U=EP =5;fCEmyx$ a/ v~A\@(p)dzrMy(ٖ\v<&͛sŨOS%?>i|5s0p*=t-JxcƍsxsKtϒS[Yx>;9ʉK!1D]aV,2b&~CԂ;a?%Z6ϥ8!NO*>x;N),66޴Sֳq$x:9r/?-XŸi|Z[ĒtB\SpW=ÔCOsƦ'w7ݫYپjn5:У9۶!e}tDD,Wu~Sx8"c<4z;Eg>⌯YBDqqql6c61La}V.}9I\9\,ߔ+z*lN?f\||ByhU0˽ٟukQ땷̊ʹTTcDk3f+f*@2:jrQBx]>)\Cnn c7g2<{g'+?a&[cbqO??Ey(wPr .I혊5`T'3g|N&ނn^q O 9yiLxqg%|d:^Փs=n/}ʊ=_7W0>)>os3/c=D,5&|K7gi(w~ž43ƌbNwHHDeB /̙Nwb=GᎧ'ӂ%yU8q/ќvN2̊CtKBkй_Τ|fs/!N'jp`ɢqLp Db<hk alLq |);Y܊ix'Q eZ2>JENʵnc۱l8"D\\\0͘fL&a`7?MDDDD3BhXM/}&NDHDᢀ#3"""""""""""BR HN&J{7OǰwBRVD~b13瑳ӏ-t2^`{<~wcHKXrKm„m CrO9.x\-Z!q@wi4i[8zUJnjq?LGsi# E"""N. -k5gĖs8lXiS6H\ۃ8 IKaYjL۷GRIQto,m 'yo&oM0>NZ%D[,ѕO֢ʓ0l%洝̸@^+uO?^GD/ǼF y,Wƴ؉/>z k*cb<=mnyQiՏ9{DjFC' rP$""WK;u2)j0.2>GK -dsߺ83*3vU6gJ-p&sBO,N1s1z .߫ɧ L&bT=Q_5  f…,6ϗٜ,Gc±X穘/%"RkyPB=BG~ nM4WwA|zUD{~> hIܷLfxu02ayU0{Z^sgRfَi1[߈^gCy‹P̹et\" Hl8/=!Y=0-F}ʘ*ILsFv˛}e]'(sI#-_e\_.>>^U3|ݻ5__o/B 4>E@_#yykW8 G>E LAۜŹj B6eF`|b,[7]Te,Kӕޫ@9v,Nb \^|ү=fa_ mcv`[0k?N1wnyB'Ɏ"n㬙 '<Ȝk{gQ\\\@mj3psLtp8lcZIMMbPB틈:c+ݎnfMK?o'OHLLٌld2aan-Lȿ)BLPwEDa7}&~ADӱe|8a?_#ґB =1k'1pZx-S=ЯMqDDDU| 1 !A"""" E"""" E"""" E"""" E"""" E"""" E"""" E"""" E"""" E"""" E""=둯D^\p+:dl_p&E-,z)qJ1,]а6L>ti-IQts\nڟVS9`f}7;q }4֍Q5, edn4s܊aDH.OSQW{6l-?w >^d̽+qs[0ay)X[ 751K )/~l1ӔTӉ(ɻGa9̎M[s)?m}WDD^pHˡ_ۑ1G$OΗV|jerg ax"ZOcK7}^t$noS  $gj!::mrﶺ7T{ H71_y} jH*5Λ<7| e5ksdR1䥲xwqo8)qm:Dv'4&ݣ.דfkZ1mߚ/&Eѽ ݇fOZI'ccD$8nzn+mrۯy\ؽ҇M"4,潙5ʣ;G~"FuɓW?~?0>NZ%D[u+u\ 4ce8S \q܊[ɳi"v_c_q;pYO;u2)jߺ83*3vU6gJ-p&sBO,N1s1z ."ӂ3l`eͭ8/}FӺ^+^zw+Ƒ!eVVۘ_OSޙLļz飾O+`a^|$"bƾϥg2 ZM3kBNzy餿~T=,[s "1(݁!-Vc,\=YP77; )r Sal600͗͘٭|D^ ipXڄ)_h쎁{׀޿Gt&9jBhUeӖWY]3mLۙ|~bP2~ 3ܾ4/zqz~4~3~Ajo x E""t}.,[S{ \5J>rk71Jg~cfhL-%di6nͼ SBIG;!ҭ|C^'KSvAoJ鶲Ww\pĚS*0f3>kUoA^и'N~"[_ ;}^4r:S$"r?HCyq^̘nI%bl>Y7{@a'Fr%Oܹ> s'\!9NeO,I,ĥ80 }3L0Q{8t$w1j;gl7ў5E>7Qe6|%R֓6r/֌˜aYчvn>;wdr8QK &Wpq8_,d6,f(<6}(b[ pLAm/gc=׽[tfW~YI"ϲoGK LA:U}SMOsM[bX0m۴c7oom:ӆӽsxy-C6cO%| rVxs̵8>fZ<)k]~+2GZ=߃ћ W)Xf2v4sv02t up`HOOjbB /"ʵnc۱l8rǥHWxGqqql6c61LaH)UV: """7 a.|?@Q(RB³gM*$$cK;p~8G4 E""rw)< lĬkk❷ OB6Q&R(WR5܆T}&"""P$"""P$"""P$"""P$"""P$"""P$"""P$"""P$"""P$"""P$"I'zV{BM {ٴ4f y",uyu7d]U{.:-!4,Fؑ`'EѭN&JP$""w.gS9}ce[on9GFFuzֹi(,ә85aݸK}uX"5&/C>aLҖrdq^aY9/u+"rcLi_V 1$L<[>w(JP>Uՙfu`wNB)K)N2#&6˸6 Wu>S$"rD"W&lsjTh@MIl'gzh*"2  ,NmpBj=* ?X4+E'a~KtgOEMNhx# ˎs'69.֨҇M(yo&oM4ҧC3©TKh~;DDU/9Gw+Mm$m9[ܷ$6Lʌ]ŶRgY?`Ăظp8O|F[Ol 9jOB$y8`,?j^7xߙ =8]!b`%bHpXVg|͗LUMY5lpV^\d]q َ׹EvXUX1cU띕Y9Qib|;7C0}Wie C-&p! 'P$"vh%JRP:qD<*$w> d6c61̬(O H<xUcxo{eg-G1Sn-*G|}繭|D^h>d*϶Ѫzi 胫]1˕ 8W.Bm@!ݾ9j3G5rCxv<Eѳ IO 5Ŋ7eӨUC^И"B* #;405x[qnh?P:n% 6s<%(:} ǸqseK8lݚykA,)p*"t9Ʀ'}srs)H1p )M3Iv2v3 )c:9s6_t KxbD=E"" )X6Ml߲[ֱ傜Xʘ^ 8Ŝ+/Xj,R!b \=wOƖYwed ӵ(毻&Q\r9TmMDp0zèْc]oIDAT>YDՓ{8mC+m~LnǕQp =iQ(HѼU=~OcgX= eϫgbs+? %霅tyE3)$KHӉ&0|]:1nqٰr!?D d }3L0Q{8t$w1j;gl^9Jd# $.gnMʋƱp9#U&?Ő׫3q瓰G.d3r%nZR0yӎ Xb'dw{- E""`$b$}PI ?bXAJeP/</o6eLA:U}SMOSug j[Zg]^|V /L)ѧS;ӾCaoLů`=7UBVA6Xx;VNӣT4_+72ntAO,sFg;y.ٝgՏϱzK4i4 {ÙV~&rmi?Sԣ MޫY3ٕoeZn00008=_lN'Fzz:VT, *Tȿrvl6*ο]Rݞ3g !Ebb".../~70 øQX7mg5WtDDDh G3t´""+4,CӺey\UeϹ pQDpKRBMi,+_jYjfJ[5:654MVSJVjjV侒 rA"\v~.1_/^sy=y9!FYPw( K <"A233ȠߨQ$^΢۸;*KOOWHُVS9(Qy۰Eӱ츞糽U;pnrȹR/7zc:4@5>wa+n k\DaD꡷oi^2JD""""""" E"""" E"""" E"""" E"""" E""""DDyp4g?>#{}n]և?eOxr:%hBs@5t4-Qǹ"ksycHg&M~ {#ݱD(B}"T?@7i?Tx\'b8{+m* E"" 7/Bѩӝ58<]3${./yI 4n'fɀAՁYMβ=n3nr(b­e9I,m#(ܺ%MJ3b_*paiڟ#gѾ} F +yw+Uxqغv"$Ҫτ(̢m$Y-6![,%9r {|?07oV0 886%'=ގq (='LGqzNc&{h6u QUޏ5q} ?ȁ7#w$8w{GhÁaqo]UJ꘎> >ZkV #SHd>$MYaŰZ'bXV+;6׍It#ї1;(O7AVig4ѶDMvHHᄹ;X##4*3~j00 P;j`stŀtѧAZDDH&:cD $]+^``OWOEB1!-1 3>'2۰Gb#?g>(]iDY0 AIsLB);m.cͲ8ięGJ[Nt*Ρ'iic*ቄzH,;$-pt nb x-[Xm":>ΌXl$ﻴ3 u> ث%)|)kggH7 ٵv~ks9}p{/ ֒2rwn82ܛaJ= 崻ѵ;nDI}'8(u9xxm/OeROߐڲng/*_/RKj) \ޛΓ?ϱk͟ii^3&ҤW@'dn·u^,hܡ5BC =}M;! I71# :}o]NNm]+$/ηM@L8-3/Ϫ|_ 66v(((7o&@χvq:z]D1M~|>#_?޾96 Պjb`q^g""""LD$(,/F }~ KDHDRSBBH)̬v?##C%'" vR!C.nCB4t>Q(Q(Q(Q(Q(Q( j#xg$ҟi;g-a^˜^BH 8?1wV6EFz_u9Kg Wy0"-m*lӰDDYĚ{xsX:?&[U\^8,dϞ\(NtlZ R$" cjcX\??l*?C1_=҆pCo,>H/+ڇ YEtmaɌ۸j@_zΨGDnd/n~d=bΏ2/f_2k6(H]A|+ouDmXƚ#0,XՊ夤(Y$.3zD| S-3,ڶƐ Vr=V֨x.Ő Ѧ"[tZrrG1)Ϛ߱[KE~(hH|2E5;J G#ىA!:(б/ðb# X^S/NWm`w潋(وLaDf;Y4w%Fk(dsGdEY>l66w׉rlX+*X0 0zY>Ag""AGjZLBHô/k>qQ LDHDDK+D1)V@_2 SD~P$"}P$}}&"yEZrWopHW__'ng={% v0&XNąו4bT @Ҥ.`_+꾥t؉w3vP":mʾj[9B P ".6 ,lA;aqZm%ߗHsuH=dOLDDDDDDDDDDDDDDDDDDDDDDDDDDDDN廬! IENDB`parlatype-1.5.4/help/C/figures/lo-customize.png0000644000175000017500000025063013171727132016373 00000000000000PNG  IHDR3!sBIT|dtEXtSoftwaregnome-screenshot> IDATxw`E^IzG])V@{Â+*V{E|PG E齗$^Krw$Hvwvvn&wgvDDDDDDDDDDDDDDDDDDDDDDDD^Y?EDDDDdB s ߵk׵n{0rɦ,2M4Μ9O>$ J 6f͚U7==}ffڷhт= 233Yj+W\_z駷lx~ C%6wݻw0lذ)))8Σs"""""R儅QvmRSSk߿ƍm߾F)!!Cдi4hPAcMXXnFjҿꫥu-DݬYΫc7oNll9@^N3 QB"##b ,** $pU5m*0 È9cf(؀½]4^ȆF5DDDDD4ᾟ^3g: ܗT #?y'l H]x"l`Y6"mGڽ~61ܲȈi&q5B91hdCDʲH#ٌ;$z F`t-ǃifypy0ar]astڱ2MGwGD`yXogOxL,i^,hkOXcZޘn_ bc;wӁfOq{LM9hdCDYK%\:6\y]}׽ɲSya{7Zq=" sW<ޚA# N+1޷Y*Z'Wii=wV",!Vhe[Ն!Rسx ^C.sS!/cݽ3t(G?c=V2&8S}͈ìQTU=, ĴO}'7|#%[odaZŵ{ѩn gλb(#3K˹m,v,&au͏??4> :!ޱ>?&^m˘lϓ- pvߖD9')o#cw(.h | } oETlTU)Îup-+hp;K]9=ɁЖ%DuDHL/޼-|ſIGqj<й6~fe}'w΢s)Wplq/{7mQ̣ӄ!g50rY81`Z&KO"6W i+`sc’hYm[΂дэiAgqèE@Xƛɖt > ==-]dzl7υ ;Qan.H'uc˕SFnᘦxؕ~?v{8l4!"RUIԜ)~LݛG10%kX& N;t4^[XX؈m|*w<֛-gӘ3N ES'oeAZڋaY{V{ַlزb[ ɨ3mD,ܸ6bcW<^ EyDD ;]m>ӿ,fËz}L -gAD&(:8^Dr՗~٢0@x-j5L~o:SIH9j3tpcx-O^u8W|iEivdfw&0j/l7ʀqĵ:k+'m,@)ݹ6DD,+N mewVYZ4k]{V/;S~_agTZ65ia٢\N2uEQY|&-{ԥsj ɽI ޚ>#29.%1*,L,zoZX- ΅| ??&kA"Z05 cϋ N]ZIcA)S8㌣ pt`섉=°a3L/en7cѷL7y.7EX&^w./vg8aav솁ey\^,AdtvMvV&6£p}'h}[QQanh ,, ݆a?#׭[ߊT/ѣGrl+ WӨDD< "*y 쒖r)iiZxݹC-򐓙LJ|";_ǃ+SbED4*zTlHȆTlHȆTlHȆTlHȆTlHȆT"""""R!lHP!"""""BT"""""R!lHP!"""""BT .ŋ?`1sCFᕝ 6ҜsNiZ휕c73GZ#+;;""""riAz۽4Dl$N/WYJC鉕cTvDDDDhd E;ܕcV]e'"""r"*4ZyHJ  v'Tpݏ?x\֑#QPYDDD_Gl~zzuExwסJJ6%"""ǿ 6,+b% Vu YOᗰ&#%Vi.QLɣ,y7-8*\ dFU]!/юFj:Syp)U,:T|_RhC` H ?>.^6bRf~hpo%_v_X-2-L,L´4-,?S2_/Xo翭i, |/+e#`* , 3Q˔91}FڢVVr^=o1==g9~۽ˋ[PG(#Փ:l_ 7K%ףTv*Wfx;"b_.fm Q擄=qe`ARYDDD_2abEvok 5ݓ2qi#y ;|m| CŒo]Bxr8LiYz&m]2 H.NOYg?2A9z~`]*^(W=6\B/Oٿ緧1y|⵴(W6_\[@{* |ۅ:ڔs隍YOݰ9 yk]Ҕ¾K>I_&~} ,d?[Nء51oM_ߟg޾v1X`'a[OroƯc[9)2GT, ?E*Fp8._㛯T&RA?φ:Xw&1t܃S(07Nb,<OT_{ JjOKk9h=8hS"""rL*Y4KĴ_Hd|s`e{ =FNY,fє4, r;P :9VLN*rH#5X۔{&N"\[3a,gփ=3Ytڝd ߰!(恕| ד?aioj޹bN:Zq7WdAS7sFtvs3}ķ9z}qj '`%!!> :>0}~ucZV`ݱ{ __8d*.OV:^[W@;*8m ;qE咐O|l$6BKȶd屠,kO^~lKYB{6%"""ǬFa^jSץN^Dۺ`ۃǐ,.~&/aW^1q6y薏l[+V9=gr+s緉ŖLGft})<^S!V:W@Lw+YvLm='PdMcl`w& , \vץLA>#zdWMx5f-L p \);@:βHU$' 7eѐ ȴL6E^#:5S7շ!|͟=VS\|mU]ހk=ױ-{8lՁ\%θ_7әv*[FzeƦ4^4Q(hB 'vBR˿|?e[3ȟUe7}3{S?!l|2*2 x`@3^ԟş'ӛ"hoyze-mZӸkwpS@;z%srLV4ds+ȯXv:f|Ȱ0_'M_%+I ^.2G,o>Wݼ5 ngtͲV{p{f1yhg-ږȟxi|y2+Mȱg̋e !w'(LqoaWzvf$ւЊ| rBᖖՉrM-Z?Q*Jgfq%Zdjtk|Avmʟ ya6%"""Ǣl)u&R ^N]Xl9iA$HL"5v^@3ػ/c'"qէv#w( #֗?˳▛{OpVݚ y%&MG /15Si4uD!T=6"#"qMF>7fH1ggՠͩ7Hr!jжw',XlɜzK{9޻ f$Dž)Em~ &I=:}AiʳndqfڢIL{ud]WOv1ia-vcAA3W!7}?$&6 7Ԯ<4qs¶VԶ14Ae- lIĘYvR 8bV6%"""ǜ 6S3ts;>˷brITR5̥ZbIreCY<glArDnrOkOgY缱YJ`zL1x^ْut~V UUrRau{5y kF=p۫l p=C9c(L%&_Ku#y#Wy'34>e$wnCaaK+nXVX#N̳<Bx4%';v&аy}aG E\u>p:irr(ʫ4BsWN1y8߫s>'44}u> Ѷ~`ğĈs8vCԦDDD)S tP ~Z+A!h?`젓)\9p K]l IDATGKAǖ+r 6wG$9s L*GT~_Ȏ;c:FpzIC%Vz6V(?00D:2*Z[*HS@,M ?Pr)"""U_ѣ9@{[># {[vG Qp$ gڂb`⨞O&{xB/b}-_bߟvQJ= JX8Kn$\Q}es8m)ݢ6\j9K,DߺJ),7*T̿EQ0{/NWL˯STQ K|g\,gֲXN<,. ׳RN`[GEQJ^RR_=T!(xeT.ЖW/** Bw٦DDD5VQ/Ͽ𱯋p(oaQзY3VQ}"_t|0ψCN=j;,:arދ(<߷AN0(rE)bT  D**\|Ж@T B۔T 6L ˰0,aǦc4X_$V⟞QvH &Ne[TNL+E+zPwav%~YbYA!:> /T۠ؾQ˨X_\dmv\JpTfզDDDNHlw Mr{A%xO/7(3Jym!F' >1dJ7 ??{ )}h TԎbClK<11 ў 9]W)QevM)RQXjV_)JyWY堪ԭ[*}8~)Q]aYA5*KE_IRy0MJ(?G*,ԦDDDN6bs(~h%tw'{]z(Ck]{[e) Sw}Ew  8(; ?}a)QnP/4bԎ{4B_FAOAu2*-m`0!.~/TD⋂T`#-{D#?\2!'BաC*ce{ j2lHP!"""""BT"""""R!lHP!"""""BT"""""R!lHP!"""""QWNN+V`ӦMdffCJJ -[$""s(GBT5kְh"wNx^lŒ3ҥ 54*9֭[NJ+9r$x_>#Gdٲelذ3߿ΆlӖBG'0Xb8{c>9.{@<փgJWyK΁4eⶎrvL""""Ƕ~7rv ۍ2p@,X@nnn g㚾#yu9y?O1k|ǻ/>s3Kn=6x?ߟIpsJ^9^733ұ[/z~ïvWL>+QFfgwsiF}ֱȻZ޸r>ف ߼Lߘ* dٲetǃe~F0 :vȲeԩӑ8+OOo3 9GTi=sy{[nw GOf7.g޽l{Ii .j>uǽsQ=KFZ8{eU|ʜGxop$ gq{ޙ~v!ch'|.O[| l20'.6`_2ydG4NB8}}\BjteuݩLgӺbK)\zECY o ' r>)99Ky~|î='6'waex__Ԯ+b#'5o^>lܔKQߙHsu\L,saqk];ѳr(=؃–jwl@b`exdi/=}s3=֛lgt(AtLeSEO 7qRn?t}__}XLd'WeGxx3yn,f~Uvnzi.[9yi!Mf3{=v-:3&>6tq^5JDDD6oLV4C~fիʳ6"굢:vA/wɒOg2oI*#lL86]~ŬwڒBaFHi۶-7nd۶m-%,,nʦMhݺu+o vԈ)OD" ߹~oSL;F0atmO&lM5//3_O[i-sDjLju'W) s*=𦌺-=bT '1BogNc ?0t0i¨Naړx;q^/eqmD0L{,y0i֦Qk?qi>ANr!d۹'l: #s6v;s%-+WYck*%k>I'Ѽf$Yرθ(ȉ"<<=zpBUɅpXEff&k׮eݺuՋRoSo{71$Ƈ?M*6XĔgAz& ;tUInNDYٺKnሡˍp}\qnt'׋$wf7O {ن7>>ջ#Ӳ&1a',3_P.C/;㧅,߰e;,j.y%T{VN[Lds,j;ns.)ب_oO|ļ_4 gMaM[WD")-{[ /Ozm9] .;lj bڏṛaԋq=iM74q֡ݰ~ErhZM}^G w3_=-ĭ7䉈 b&'##l!33m۶ѳgORRR>a.>ib>Aq?ϘW6q -+Zis5Ћ <63LISs~V?O|2<8qR19\:$䢰T.~v01 9ςSClӋ*s[n~n\׊^ai @T:vHN>'ѣ`CDDDD*]y8mu_S!"""" UO 6 """rzv`e@N'ȳ EDDDDhS!"""""BT"""""R!lHw*S֡m=7m4kSmi$nmc~_2 99U#x-,ȫ0hѿK\c r;El>أv(""r"o}E4;,.ͧ]ٜtRβe^{+)" GB`ƴ,qXyfLJbY|6~woRܣhϯTlX99e긘s7k ߻=4NqX_gUEpP/AQe#4Z&=}TN*""RߏeYܽ;]Y:DEFQVmjVa$&&}W`ÝDZ^hq$<'.FFEe>o3yɌGdNWZ\"ZN/gXKdrr(j:y-,_C#fYgק?S7h:&Mu,4&q6ҳLŢri%w⬔pZ²=sIKOcuԪQ'_ؔ>Z:nYXwbmgf9؜NlV0huJmn>-f]D,w 'ܾ΅'IjmU\;I_bA߾kfeœ3d?5>[om7X6̒k7Yzؙgq>+OهGش[scG1b@-3SF,&"r"ھcJ@F\JF1!p4 <=%ؐw?0I8Za\lڑ-f^#ahO˿k3Y4keYp;Ѧߗh՝i\-sFDPJRz,Z.\gi.d[ɦyͳ`6#892oDDc9 4*YB|BLaFl0HiWڛLՐeZx2xS9Wt{M sTH!|meZx5qe嵴,/aYdKx;ac/+䱗h (oȉe2Hi_gz;Lc9egl,?3s-1Dɞ-Do;-T(mH(e ɒ^$%)/E%0̜s9g<89ϹձfZ=E|36[e:끗77v7HzxbΆVr5W7%m+b[kFtQ~nx Jbhߨ[ہ>fO۹s-,-emf4[8?.-H"͸چnLdo?bO6 =tkOTڂ߲7 *j՝eyK"s33}qyVh5*F뛱nr~;G,U;u2x~]LcOYܘ/`q Zعd._7tj9CgWnrȾvlDY*zY{\G*) RՔ ;-}mhW= `3_VfT Xs ;SM̴=͋7_Ojє b\E %:M*y]< j4.OsqS{6WЯ`֜|/O [~ďr\3|?22ߨTǫ]p'&7KbDӨSu}8pqu<0_=ycΆ5߶8[¬7F4/m&""""V{6$vӶ+bz6Xl#7~7+h(HY2jԘ 駟tA$gsMdTHe}dEɳH™xZ+RwldfIqkV 8}+FMcw^RHqըç2l qNo̞S74#JXXDDDDPQ޾""""KjZ*t(e \Gd#9΄RCcx-S|aWbR|X"ݯ[iLxrz)841M:%:KH''\80]JS?w*Ɇ,l%5]lr#""""Paib )m]H,4@dCDDDD\K=穞 [2A=""""({lkn\*wcC:qo4FudꎝH*_19""""R*uΆi5./ݗpfpl&~Z0g㟣cT!/M02_[4(jZJDDDDJ'wl&^#,%<5!ꅁ4Ҝ\wkRMQ=Bä8SφJNMƩJcУ%3_Y†hS,3gڏr. Ѕ!<ʯ|ү |׭A!UNSQHtg-S>均w23{3& w<:1# (|FC?^׋>ed3µㆇ'(pEuIHw;OeOTW?=ܺ ,`, k4&P܇Q%_9{{^̛۟6`9;7a tK"E{JofOھgv;46Պ`eODD,aT9ÝΈ!H*ya&Yv{?_Q3*|dZ\tb ~.[GOw&˟P[2z<5ZfX \3tV;>[wHykQ}!Ehd]C6sP/*EDp7盳H`dHm |'_;;+}YlbYWM0ތFas5Ondƿ\lNz14ҭo]~`83N_ ״cX )Zdՙv:DȪέKbbY?ʱ fV*X,oF7!(kB+b}+zN% >$vn^K (p( dXC+/7SK^'dN8 i& !W=ʋ;z԰9\3~721mpvE43#xm$87̬OyhNjFLg0ħj$gX5䏏xC [u Τ,;6qpjgF` $שT&&^ EDJ </?rzȒ?ZM;[ii/K8m{g`P$;H-נ|jpk,tg]/o#vZ›#]@E:>)7\:N-}L-Ssm=hnov{_<{9O~m<{ uH FǞ/6LUs K 5;f})bWh\EkQ{,( A~nFU`U }7QO0$+gd{!ڲn+gNξyq =rc?O=c3yFvf>En@`nkʫ~rޗώF~а(o7#Fl3v4J=ycΆ50ta֏/Wdhˢܒ)%%O>׎nCF0yVk,:<1)w7f-c`hI+fgҸKl_ z\W3p8d],o"dBaWNoXG44'lVkíW(۵aeMR)uyS?ɓi~y+pƩfJ]xu,[jMBxڦ Oѕ|ٙĆ/?9i~zP9KWRÑz}&*Oy8H$U(gnJ4:qW~> #)^4AȘ8z5ݓh}0^ߗiB_c8z'|(O`o`uM9U8rCy-3!,^! n'""9}2eRO陕[J|L%Yį_R)tt"Eގg/됉$Qf؏%jt`#X h{g:t>>fj޸"4ϞT[^g.oQ͕l[DG&ĹUr [9]}-1ja3s,"˴ @NgCs6.8?d٨-Hw%>oc"Hf![Zoͱ܋Ě:+-KD=ޙAqoF0`(c2 (](=q5)4g<5g#&g϶w1,[]] ?&/]L:y"rq2C;x˱R""¦M.xvӱCׇyILLdkY& [iܰ1aaa`׷>2/G]4() q%'h`]´H\gC9"R,8'I@DD)[nn?q +m%""""Raa8N$##9>>>pkJ6DDDDĥbhsws:deeyd50%""""2-*RKq %"""""J6DDDDD%-xc.ښ'T+>WTJDDDDcwU=z*2W9OM!V+4APPJ4DDDDD<'xa $00PHX[ v[ H6Ȇu'Šq2|#:nl]}t"""""%ZJdWYkSMOзi0 H';(?2o`|lR*DDDDDʸl~Tmp$fϺկmJD )J币Ovb|&/u^<LJDDDDd+Ɇo-zP+27һIDDDDD E_K(P!""""".dCDDDDD\BɆ q %"""""J6DDDDD%lK(quRDDDDrx{:|%_9{{^̛۟yΡ>i!C>Npl)؝Aߋk^7+w;46լ?/60S}vɼ1ǿٓI+wujHd 8Lx'(H8M?6 9KnʽCۦ=ĀZpCu%RB9 قϾCj8v$dzK29o-5t\g arصi-O:t"""OO6 oEprm1O›KQ{h EX6ZmwѳA;bEj4j +!Bמ+9x;lj iESZTsz48ҫ'$}Lam}cvpRX#qĿ5:G_F > qS{ynPd7~HӃ֪CӰBF]&pU {\ώcآ y0,3y Ôv&Y:vg՝iC3-]m#oW؞/` GNiǡ8'Ds%wStM/MY 8lٸz45|6LƷ?E4r ss/""FxӖ&[~Xx<ÌY[)߭7C wG*RtlU3j0M7Nkoi|(g3Ⱥ)>f1N{+vM0SkU^C'`t&eDs$& "68g#Oks)yL_^ac>̱[yy }<{,Fa"s6aydIN82[5|H3|3̽1ިy#>0,ATW +ԾLJl~=xfw:уl@7h߱% /4$HZq'7L/!;T?=YӹJZL[0I IDATw]XZuybRnZ0p%j&̟lt< 3 ?DuyyFhgObY+[IL eOY;R]+V5|RȘJjV̘;$Ӎլ@w9 %&7݆xNd]&-\⍗_~*<:o95qYBOk,Go?wqtGzFg`̭/g1|hs1_*O/""r1Fad+Mn,_:I8.>} j4q3cӟ|7;|:8SػyQ>I|׹*bGwHlu0RW7!rw;𳞗+|>qн\~ +Sٶ|J؏%jt`#X hT,-bϽ:N|9a53s8xSz&&nη˥|i<ݾ)W&)f1s[ R`g$2ma\VMŇx}y%#0*aLۜŨq82&N`ƈGsA`tv`ЕMK[bxliԟIco;ȸkDXf fUbMR:8B[=Ў/2{h~~Y¹v80*͇: g"]ߘII|+z(΀X귺wyD~7(/8y][gϞmرc;.YU-^Nu*zEJb~-r,HiӦ gt[fѣ+/v'APy6暁c~7E3wCĿtT.3^F`yMKU [GOwOhS3i o|Z=ʫ6d~TD㽏!=srkBt9Q~>;[0whQ-gNL/ty^֢XC\h8~.oHT#mZ=蹁QӇ>B""Rdƿ\y'ul#듪qo߮UՖ9Ol'! %Rr/iO`׮CIij[D99+RQy5 uQ>uϬw{QTY*6 ^ 5!\U5UƘFϽNwR8 5)2&)GVN|}kf=3؟'OvhA-"9{o~-ZҤ GI̹rN^A!qǍiҼ;Չ6'ұ5MI]~b3X#q ߴgMy)ܩ-MH-y󚼂~m6V\qMgy֟,9>C:>]ir#]qV[;iBNEDD\'zO싒GVE]ppjL哒,m#zfr|қƿ_ͭ-6b!Vμ ƌZ?VV` * 3x_8ums(J]flZ>C'`t&e>I fJQiu^{;}OۍG]ąw!ƪ>>i57q~~ ,ea?4œdެJϹiկR>=uuZFǸuk`XNxqю~`x,x#њ7)%U}P|=#x^8Fch[.ݰea`+<)YFZT!ܣF|ǖ64wrSDػ:-C?nޜaMqᇈ.ϮD_2|3̽1ިy#>6UcA1^qK&̀Op{ų?">9ƌ~t|/M#m@#} f69}C?]Y*F~ۘ6bc&;#F'y8rbH amOŬ{sH53e%@j< 3^iByVqb{I0R)Y_e]#w[YS|j u?H gLE=[#l ;ql'OZ.tƁx`dR9RU2u]SlbԂ/ ?k5>Hbo+0 gy.c{y+(P[grCXvWFj l- {o!G \c|@ʅW/""J%k:t!o{Qٽi9SFNbW[h1TRYK !d2ML}>6^&&s^o*;(~Vm8B9DGL|j$Vl`Ǿ7+WᬂCg4:XjL(?}LJ__gZ~b*/ NwPׯ61`uT̝50yf]r2O|̚i^ˬ1Hkۓakrsݱh;gB^!=֞!kDDX*=F MOfcxt^[cA>ӕs[$ؕ9ԯN'J!NCƒsz ߻f_~|0.Vn4 Ѧ_]zc#OLw_}9z |򃼓M:]xhbV}hwL&Ek'&"ޱD\ɤ0;"gʛӤ\HDDJ Ξ=ޱc|w\l wuZt1THM6]>ct`׷>2/G]4 5瑒i@ILLt$O$+vHy{{FX,׶Z2i۱4mܔr9z(lb۩Y[V!"""".x<ݮ[Hp׺5k׸m%""""RYYY '##ӡIr¦%LDDDDD%Գ!"""".g&*.s q)Ⱦ©Õ q9wli%I4~fh%|[o)L%/.r{[֢XC H4DDDʐ8Kn닷7G%<< GQ]\dƿ\y\Tmd|i `$o߳{\P$o +!B%p;w6r1O8ٸv7AuS*%霴{JlƄ^"qkۍwwd`dnВ&ng?bMŚ{Xtؚ&[Ф`֜k&|cB-}z _.>2ܳm1WdԩAAAx{{8>i2bK.>nw,9y8{25צڃ1h,~5YCF@e$rCVL｟_c0l}k y,| ag0>m 8+oߣ}'>DD00p:.O66n܈:I>ɍ3y;N9+@՛w~7Q;Ȃ Bff&[>}0}tKRR;Kf_#h\dBqF鑞ݿ/A6G~ hJte$e_~*<:o95cs $}BpNd᏿dž)wIW^kqUW9|<1Cƭ4{n2`.2,4#`{cxT\1s6<$Ra?zH;M eUVKd z4=ħF2kv;-rş o,'غqv -=[1יfvź_Ws0{9ckY7,_= iX|`:pj\"W_L[q$aԯ ٰաKߎ?^{8V^͠AZ6;튪TGu>%PQqĄHTGfнe)Ӑ+#cfx1'FQn]ل(%F>@F4>:Ac0>J!NCƒklx4Jjxa""r =è7n_>?Gđ|WadfH鲧SIʕ+y饗6l1r ƍvڋ9Bs:n#zn;lͤ/U..D$z\ߣ sՓ\ls94kx"ɓ;a?1S8`GٙI/Gwq 6τN?h{Ŋ[<3lذ?oFèDDDDTʽ+M6Y*G9v, Ҙ͔ۛXFj?,pE0O?#S{9-[[.߿pVjT=|˹FAOoEDDD1p0իWcGG"s#/s0DK85[dxF`4uFNݎ?rهdXVڶnǀ~?ݳa?Ȋry[hjtj[)}uS~W?<%LL |yƶ:v_|O]fqP}zaҔWg7=]~<+gCDDDDJ'7_6r_B~7BCC裏x駩^:bX֋n(.i~""""RJcr˖-(_12ϟW*UoƑ#G_~{L<ﾛ={}7{ʕ\O~<5A\Ɇ;l/)l Wf] O3i$&O?̆  R_~qϜ jT""""Rpm۶ERYn7N߾}IHH`(6qĜ %""""Zn&˖-}y|ٳ[n pws= /WG4MKj},[-s6j:{l{ǎqɲ%յoxb:]שl6m}vM_%11fdff^p8HII__s29q 6C\\>>>pV+[oqƄ[vނy\|,^=ztҀԜGJ隳!"""".9E0 0 0Nl !55 I+Pld#} 3ޘˮg!6+Z0Z?:,')WKְ=> #:Wuv5CrY/ڋSIF^}||JLOL\x'\գ7"sjqr+kw[ym[]wJLv|Yhw3=;eΙBʽpK5?O a)l6i|JLQAjZ*6md/l55ҷwI6Xd-U}mEl1wfE*W !P>p///bbbv$ld%b⫬ȵ)'4:ӏJ Agv_xE&N;!@]""""I W#:4l1gnbxYyA EDDD\eV=s{?(`FaX|$qd ;d $WɆHQ+wHT6=Hލ TQ!""""RJxaH!994LdI5ͱ97'~/5V%,G%`U~8t"Sפ޲o;_ݏǞ>@[k}o_G/_{EE!"""";EjSJś楛 Sѯu'""""")Ɇhɡ#8ԴTOTKtd4au0%""""R豣4׀r9z(n &ʽwW!"""".u0 5 $8pʜj׬ͺ)%5-rdddx:2p^.#Cش諈z6DDDDL4͂ Kx+2컚)S?wR!"""". RφJ 3Mlqu%ackM Ⱦu:2M-L_Wu:ѵd IDATܻ'lġ\ш=ψ|?<4E('7"?]3a3'Ff$ \?׳X:+p2 `ᇩcy?}‘Sqy^t&mfL]ÄS=TY{$0>żE)%.}s:r+mEy'˼%n4Ҳa{Cjb4k_@? ϟU8y085nFQLZFcN[~rȡdd/ޘW%sq.y>5SnlkJכ;ٌJ/[`.={!ȝ=fNoq 6K)!e{ڲaU^ڍM ޮ;Cfc0ϣ`͏|\.56c.%(j<7D!]'Ⱦ[K^+?KF.~|I(!> Qᄄ1BBB l3~?ĩ}$m/'q[J'5RXex#炉|B>iH#Rmi>hRg !*+ԏ|7oGꃟC:q}n^:'xưlٴ'p;DV J BV`Up9$5jW>ѳi9|[nrQĥlTS(6zdu>.NV 3Ȧ` :zp 7f 'BdT6w}-US;RS,֕M=FEAѸS^;O1|oJ!!myӲRgǃ4FQ0>9=*umI;~JpzWcTXJoB74ra't)/gf-?(K'PY㠾K~u+\63MZAngFjlpRFUl)AS7.V!4̓ەƯENnzx^'NG7 X1Op,H ^ ׄGWI(.H*k~Xq|=clw v]?v|T7Y<_ZGkF]Bڃ2hpu3VKƶ;UykaB3LS(S!ژ?6P!^JݨZ6~k,RlQ kjn>ȥHiyRi\ *p.{"x{QG q=:XшJݨRZv͚5__4ܹ{'Z @ㆍ3=]!91Һ/W{odis7SKi#C-V .2·AÔs1zWEק^Zg0t6noh@>,㉃cԌytʟtN9}ӡZ50jvT18A}Qs,>fܻS٫2:.yo^OzҜ' ??րND%op@_>hS?Mc~t̸B$- ǹwZXiBQ#'UjD]o\7BtlФ'-aeA4΋BYBܹvcG!$^A1U9tgGBd(No (fڳ R OG|#9(uBsQݨةX7:+_A6&%kaɤֺRJ 9< &S^=݀޷/%uRRg8b\cYi-֠GR?`oPV `H{02"s(O6N,"+9JQ7 nSHEBX,}ƝڝQSJ+OJ)̑,Vyݦ6O'<2@Ca|{LG z3y٥= Hˆ"ӨUaΆVjQΈB.+_'R{֯W !BarYhlF7I!B!L.yúty[XƗ{Sf`C!Bl+޳!l!B{#rʝ~gkDipw;Rpڏq׺2tZ )l.嗭oh,C_@]ӳu s2Ǡ Ba:gF5wv9666̑L&6Wzz'A\Z"`5aь[W *JCr`rh`b6K )¾E񟴖zQ @}j :fOkଊԜL8[/f}vϰirmtuj\U_S Ae\/JLRBĶ҈_Nyh\%/-")TU8JuxOMtm !=TIoR[( !; !!w7wrȉZ-uf4'..W`#g6W4n_]p]X8CF֥͘I]_!+w|ZOZm)b?nCZ m?m 4lQJeBVp,ݡt?|ZN4a\M53e֤|4ϰrǧG4Kl׀ow_"Ev+WeTqZv6]bdtiT.Bt: tx)J 6{z.N]W4ě@kAȉ3+kڡ}WأHj$)Mon?'܏p֬{n./b^c%+(!*\`rO;n/ QWU :|Knj"JY) !wpmH{H3\VX7څCSbmŋTg=b'И G ;v[G%d^! 9}?nSX5T'8EU3{L==CffB!; Gz#D=`':,'k4N6OtFt.b$,$Pa#VaԮuNZrQkOJ}.v)6Mp,珜uN<Ə36Yu<5]ը2azA`=Lhu/<2a[m Cu=a͕Hu*G]Fӵ_04b;b!3+gh$؛Q1zVvnL&/BK`# ?Oa~9ӿ5kOy@ćiO2Q"];4Z+Ӽe,J&PVsF:Ψ~.BQ9 lZW^yajJQf'?&ڍuhh=_SI f+&I)RëdN6/f/8c+4ō9S]DW.dY=7Sc=d`qڽ"B7I_!xtNfo ܽvezqƙ{i>z]cseJk,Ѝo`x'… /̭mvPo^OzҜ' ??ր1'd1oxˆ`$iBK3 ie6>w@C!2Ixx8ăD_]{;{rȉ'**KG`Ca'?#>wOmeK:*frZBDhX(ʔy焆rErxuUUa k|y !0(WNٝ028Ҡ4Nٝ(Qg9#B9}Gw3""Dquq%6EVHHH,]ؤ[B!$eC!B((^@+f}/B!0)*m lӿCV`C!Bll!B f( mZl!BR%VvFsR3lDG/8'l(SjGuSJXs6t),9J =3>\~z4Kek[8rבB9FHJMyoMg !09i0?iHf}Cׂ# u3_5sX&rl(w;%1XɧC.{T|:2wjjR*˱1o^r#WuiV+B {7ܴ+9Sʫ<9}ŒY=6fhtTX9pK , R[7GSR8W!J:_WxB񎐖wϛR?m^wVD1"&u{5^K>rgxWr3.ilWKH-"ZG߃1Fgv 3MU͇j-h8PXԏWuڰZdW 9/-fڎXHlTNmgm$vfWkB!2JhTY<&ͨӤg ^zydƏ9x3 @%8>#M̜;ՙn@P4쾟XH>opuwҴP rBq iwSp`4O>c_ԜL8U3WӲ_H56ZMoN^*&N]!$f#+Z7ZM^U?fw-`“DM~ýߟ6ƛ{U]ưìoGv֭EB}1vxW~,#\߹'e?.iX#U+Ieiܮ`CYzkKWe5- G4c;Jz6ǽ8rv|7:tzri !0sl( 4:ӹ摓^?ʱ?y0rN0 6d4{ 59 ǝF(j I햅q/w7)۩Mw֠@o\R{6XaDz sKx tc?>:9ܿ5랛ˋ 9j+[r~t5W̊."Pa4&v[ROWW" @-ϲHʭ۷@<c?8q+x;wWoWFf9Ʒ{PQȁLꐵ02U%{TKf5rsaMtO5-):=Rt-#g&^C;"*9#⥤pv:zU ZlI3"y.o E'a 6 ]=Ζ`Wg"EbAI ,gҢ,^l2cv:aN\h~qSI g <ǢۈԒ٤!,_FHV~BǾjw)kwsi?TznAܽqgo_8hK餩Nq}:)B&2KסP~ؗ]?SA ߃hR;ONvF][R)#N߲EQV+P;Hy4M , PJFVL][6 Yۿ5ksPfkfwZe IDATluO߯fT%=(SWiKOLp:ˑ]h<$7hpoBX/z,P /kˬ[I f+&I)RëxYuSG@ESvvkS>[,IʻBAT*suRړv39?<9~#)V..TnzdT1o_oKB:*ʿ- JR-s1TYKi5k|}}\pk.3G6tB!D .2·AÔs1zWE׿%#@ ̻M=# ۀ18A}Qs,>ʝ}xcmHElܭu~OMz?񌝝^tiλ~zk<@t'*@ElJB!Rm@b}GcrƧ uIQu^,_-D۵ fGF`^Ec` w86Vc4*YUjW9q)rETjf bo-2B!oFhT*tCfLzvqDz4҈[ ArpJx•=ks5 |tGQkuQʹ2dƤpȃ)e/C !BZ6켙x~4&"~,ZGT1/&*}V&%lT25]/jѨe#8nܸIhXYB!J  Z:Ä%TfV<#/K`N;B!( !RΒYjѲmq}Ĵ̵->ظu BnݾC"͝ 33uiN< e߬9,>x䉹 Bʤ.̆h4[W$gC/ggg̝ !BWl,k :@R6\nq B!^:u\9sq= .&6G;W,_^'~ `@TtԨVsa4yWNGrȉYGBBB {{{khl!BL;9sDV;;H||"}D1 V8:9U% Gpӏ7) B!Ļ36*_ m+k,++k>u~dX\raJ3!B!+`4onv{sB!BVixKO^%F8rT4\{%^jʵgl[6/>*ˣ+bQ"[T!BerIp|-մؖ{9RcSUfc3jQ EY+r9=n:gKR *FQ:|RM2}4šĊu ֣PvDA hۣI{I!B!Jlh~Tw.}C7kT,3M\'j +`lu/Y:S~dx12A6Yf7a4>ArcNaL>`o l9(dKj%B!;&k֬1;i׺ir%B!0Ө^4 ϯ5>Qb, !B![G !B!IH!B!0 6B!&!B!$$B!BB!B`C!Bal!B!LB !B!IH!B!0 6B!&!B!$$B!BB!B`C!Bal9|2vTyzmz2f%sgN@~zVA?s`5)7#ۧP?ZQ$5hti ww`|:уlۜmMM8+\~zuё;& SՆì?~#Ը)Ee$SOLܫUݭyਿԆoO˫"Sp9oGV䟯2m賮]ӿ~^19VW`yʑJ}'Iqs]^;6kQ0< %ZeV!yvo/Xyd炉|Bވ݇kwsi?x)؜| 6kٻI.Ffzd-t.i_6 8xߞeH+xY{RRvqm.6ߧm,+V9͠B#yTƓ{*dZ\>jKG@e 1$[6mc+ѣՂQ'׍ @݋K7QmwmhSbTmhca\keܑo=([*]Oǭ6[¨9[A>t/sQbccy7_&zcڝJ*KnfLKuɌ://s^2*LY Pū rz壣9x QQ8;^M#R?qFlLeJ:BK횵t׍J7wx'Jً1ANUʻ\Ӆ,(l|*SW͝!^B!ĻK s6,^_vaz7B!ĻM r/3z䚝^?ǹ&Hr< !B qe}00 ܻ~X2wrd>.E0IZ% a9?nF2xGʏB ˬ1 d/ii3V\ Z%M^nZJ"ӣN^K{Z!֫G% zNMiW WEQ# R2xOj>x%Ti؆nWsa71*J&w6t#1[U_ʏxU6LX_tuP)Vփ~Yׯ,’ɞ!↾}\ePbbУ( FCl1\䡣iNx3%ij;l fb4$)vMRv6 ӭt/;") z}2>僗Oc>?}t)?Œ46Z o]!~lQq3[BڝM  @q/ٔ*q~  ?uzi%.w?ٺ~4Sど=ˁcyrL@>93ɎTD^c 'U;Ӈi yb~GL肷s^jG5ąز;&4fد؝T!3j 4͊ٸ`$g,օx_Fm2'U}Uj[ۗ % #}&Gd2+->.3Z\Q[Q38BddQ)׉qfn+=Fxu'!*,B߯>Xۯ֏ٔGYCM~uѥ$|.eEưìoGv֭ >M(=Hx7;CKЬ*ҴJȎ+츂Nmh36qlݚϟR|n8}H SeD^0 ^6Wp=ir MvO B})`&sZGY v<ϫF2Ȗ  45OlpcHo >YzgxRS'#7i>Y(]Ԟ t7wC)T* DQX5GzJ EOYjٱNV!@oͺf"&- ǝjEP#0"h<}ho![ܣ.jMl*P9Py vr9&;P{>l2mHx|œVy3x-&9S{ 59xKx6_%DB-#-W?;*ՒR5dw ˗-{ 8U>Ia? e}Q֗φ\fԡLS"<[{Su +i#3vk>4O̡|0[fVʅcal5ً7f2n|R*c1!7/<TVةs5n޼Owsu:Ոb'IVoA_jZV݈\WW4Se/eu_{7h%#i|gXs"̡KObŞs !$<4j2i`xJ;Bްɞ2d˦m=y!zԶZP0*(l3~?ĩ}$m/'q[ HekFDr9_B{SI:ҝ*Gd%ff]N~V8hp=&!e Rʻ=w_@ؽHJhy~$Gς)݀U+_ )*d>uG~8rقr\#9ȕ8*5Qj,jZjgF(,5+M .,e\5L`>^x9s>|Ϲ~^)} ^DưrBԕӭV+:)CaKW wUؔvj!y ^IzPjpv{{t^Ҋ-q"?i֋%}h76 gZ r6|6K2Lև9:Lm}3X8?Lhܾc/n'{ n1P-c捤9@*MR^/~duL YvT]w|{dfѺ/oVYu0^?1dH;Kk_hz!F=ZqFg =׽^/J{OXI oM[x y3g]eϻ_H>C ﹄]ȡaB>>^HJȐ+e+~;vB g!%l!B!JB!B!èieݎ+(B !.)6ʘl^-#g&/X:h&,B<ۤ(CΝ$xv #g cÒ-AO%g!BHQF;AВLX0 mF72ɇE9#Ͻ9b(4!QB!jRl'"Z~cВ\w3' A8'K/xZ!wfETVfF0?nnmgR|.$採wv4oA.xm [HG/ӼG/M?>ׅBg,D˶1o4ڌLfdsi7yUkXǐ͊?Vث"vV6ƾ9[(%Y׿gb|u|ײmf6.h1Q> Fg;N~Xgu#>yU:>׋|/Bu;(y6/{~fd@P鈉E7XZq9xwbLJu? 'жQ˱2DpKo½#URۭ/1Ƣ+;m{{sfaVH|/BuRl?J&=*mVfQgЬ]L3:\Цk+f=~s 1Cy]Ǻ}ܛ9~ _wVlɐKdvϣ89:{ _šv^(E%φ#l>LI)4aH9şpǵ}>Mc%wɣ+P\w}bȒ$Vk>SgO y6 6Ͳ7Fu-˲ݡ\ϰv[>?vJ D%eL=-o?mAGHЂC>̈́*Zj?oIPLC3[8."r(Eg b$LMFZ&ё78u gEPή¢QҸMl[?>}P ?4c},a~xF, `{*J뫣؟A$s6rA[>f6sAT1mC;|Um(kJ"qQX)} J9GaKص |ʘGbWx]+qb3w 7,adӬ1x4.`=RR$1m1-[ز|2o45:a֊ZotLÁ$ã5ZNdvO/3crBȕRX0n)?T"x{+9rMm``-3!TN*2}?yW.vxz{^YQ[d ˵W#‰B|yMT P(PT0F_<9%*kG\MҁTNl'x( p/h 4e>lk#CydH(x"1qUVcߛN@-N;ahnQQ3<A=hOKT24ZT6θT۽PWg0R7;ec,K8SkO ;8ԭG!3EݕO12s/Oܵ@AJMش| #>Bu nTae|`'-Ue9&W  t$eKq֍6N7{/$H}ԩNĤ} Q+ s 3Kws[t1lEח_˯z (`{4\=<=a4[!--nnz,ymIA1Թ>Ί;ĥʥ !b pswe`amcN5߬U|##fƵY! Gv*(hLTrOJ1eAi ^}׾k?ZVU"卷8|[QŽ*aG[d,PdLtΎצ~7~ɬ+9{8ۓdjv G̣E1߿q,1JGq!bpsweрNg$16@@x Tz|f^ 8Fr9/~5žT`MDX/ -)n0)猭:Ex4rͣ,+|634Og;~% 🷜kS\c mB[6pB&7wWF|53ۀضРEƢ/&7@JF 5 EC|^ȸtk*C{Fy}V-XǔEH$[>Vop޸[g *Ѹmooxw>(8Տ 2+hVNhC5CyTr%FLߥdZNQc\: ;3esɄ^î[hj*n˘y#id}3X8?Lhܾc/ά=\5ZèB$R7j===]pzuVַ}?ǺOyk@Z/82/(&\Lq?e$^e΄w L?~SVY<=Z<6mT~uVB !jϾ=xvο;OHH>>>^HJȐ+e+~;r"!v޿(ɶEYS6Y!A qA{;Y2=eͥ%ٶB!(wy9,GXnt .<~=Pm !BJ q <9)k[Q۱vB !BFULBT$o'9myԮM9;Amh -ZWb2ɇ/2ש״NIn( }"sͨi)z^$rB!EɅHؾ/vxWpwBTCˆMCfT ( r ;La= XT3ڨ5a V3C0EW:xbxoVDe=5gY<~r|< iaD{kܻx|<BQL(&o'SJ5 F_BZj]?AmL6#;uzYh3u\Ejrc zJV6ƾ9wPVˮd\z3/dІ)7q .hYA VYcCjv=K\, 4k4~GK޺ҳ,-'Dzbڴ!a'lFEZ|z[tL:U8{];jSA3j|9k8<ߓiGs!|W~wEWFw4ԏg꡿byBmXv=k\,4pT+'1C#jWJݦߨТB!ܳQ0~H*T^sVfQgЬ]L3:\Цk+fn%g), ;IieZC;qvt𛩘Wii3e!F[z,6yq'665c@8qھ?M2{}^_RE[zFs-Qt {=/a -yBDfŵi6Wz imhmDWƳ6⭬U66U"H Z0uh1 Gq\̊q!%yq?'˱jU蓧JԹ❖v(CZ$;sѷͩ fpޟ:ePgP~w;%dF?d?V,iqimquwR]OjYr|QB!J\(fs}Ň>c'&96fj22Cg8s,rvԔm`Sޚv郊1=JV?%6foXȚY9; ڻkѵ]!H_0fb!N`qtfo-t]Op1{3m|<-r3*Xrc5(yGm-o?ߦg}8?K $pѩ*=\#y?d;:&435:a֊ZotLÁF3d~7Y5}-ۂoP]5zrCuKXMk _H0bϴQ|›w0vs.o o/Xv#@cǴ);Tlaɼ^mЅ)^/YKw!,hM<BQpR:?‡LK-usweA,c~)3G# [\m[V`aE#^ҮA]Z鋛"/SZT<}u)!r4Sr8va4/lNHC{1whʀ }}#vUiܱ-ըDꕰR %* ** @Gw\n/׳ao+=ݬPX5zƘ{"Оݢab=6\72wK8u%zvMԨՈNo7!b) hۀZ5ѢMS\=|?zn@͚zg+;Y{̙џLൖCkF09oe%- ?*TJ-*g\Z5/3g^vye[eEi_)dA(hB$èJ+#>_3uM%V*.0|#>Buk}  3K|s}Kգ7$ G艘:Iq==&=߮v7\hRN +{Hhˮ0+ڽ]<[29Sx};C gwf7?qkʴ. .hz Pa#uxue\ _."7ccҜ ҡ oŶeoy- nFؓ=yv̛܉hy,Ĝ;3濎b<BQ(FF[<ܸ2w0kf~ŀnX;+,-0Q🷞3;f"YbT5AHy-e(naGVC"UeEvY^J\4cdBխXP+RÐr%S7c5 v'_,hQ?kYۭv!2a'7ViI9'5wL wj^ea&cZeO?JlwϺ1&"Ngx-շNĭsG~Y^ uw23uR <BQrdU1-ϵ/uroȵږuy7wWF!pQ tFc d7qm^ķ>C碈II%>"EsCbZ*PVhà귁qNM`:sp?"v< {vMܾ+/|~b*lj;|gt]W_Ȑ/`h͝G@ aؼ̂wރQn>xZV>I ,cOJ%+:>q8Cgv!;S\נ4WQXPۀ2[/'UFd̺NK !(Areԩ] Qh=~AMŽc'5m n-?ٕxBCeOxxx9~>EZ&x[0;O|'Ei"CЭKHQT{s}|>w5yBBB4@WZ5@\(]1XH> !.gC!BQ"B!BF%dݎ+(wR!SL !DsIDi яSBI2J!BQ"("B/ "B/v(B<6g!%Fs>4+eKM<$BgeȹS/θ#axW IDATalXE:h$,B)6ʈs'#Z FТh~C&^B!@2!DAK1o ZS510}$`AP:hڃ/M@Xہ歽YUSR1CqkJ1Z qk>j]f%x(pTUE揮 Ei+Bym) ?AmL6# F6SG̵[LNc,`%C'^:7~aa s=eExjH>&39;0r <]H+T^lpe2pZ.XB!J\(Ea'lFEZB^'&|:SN9GN_a=6"iۯ(,4˞h`Z&I%eĄL0qBՓ~i RuKIIףci+BQ0~H*T*YYDBvM057#ddfpuCX;nO&T꥿}~gY\94X?vJH=Ĉ>K1mdIHL+5)LżJOf(C9//=DomKhˑc\h߾Ÿ|7m APf2޽[?{6D%eL5OEБ(`f3/!<.cݾhh]z\>`f!hTՂ Rپ&WPX˞/ jQ ,6Pi׮"oZPQ$VHnۃyAO8әgU#GfP_;/0bU5HXeIbGn[ [}N'qhɋu-c$v[|]bg;kU5^^5(4 ɗQ:tmb4f`DhbNXy EJ!av﨔 1œVS35iDGԡ39A9r\ FejJ6 )oo`A7nZ?4}Zc7x4.`=RR{}H* `@;Nlc[bca%y t0{~oSZ~r{]co| U_|w^OECѴݶh 6eJ-lY>7L^!ZAkΖsEˮc^ ^%R}*|AVMchFfuS^\Z*PXbpQ;baLJ:Tc\Lv^aĦ~NK/YtaR/D1XODHTh f+L;qs'[jز*#6\cCQSUpmg \LmW>%=WQcZ8ś8mgϬ68ȑE!]rH(En 1rr,/rh$wx{+9CӶb3cϴ v,`Ď}GYGIw}fup^Wiנ.M]{өI-~úF ppw4ܡ)&NISqǶ.ɤT)O3GAB!dU)ssweǃY=k|s@ܵ\ܪSťFo`CߴnWXlXUqݩP$]EnX/6=09j Xf1`)7I‘NM8HLWiG[5k;ۄoK,opPa4?|íQǨ2DJ.,Xckuۖ>-׶@aH,'\Ci}mn*SA:e_=kJ4`4 v[oK{>{")Wo~I00TMj-cm0F,X.v](naGnP`ۼ/Uz~wn+{jG%rLz%= O`לFMnY7Ƥ\d։]/{juح(=_7]+Q\qw;BJLF@Y:2Z6\asR.]|kĈ"Nvq3+yoy]ZTqķ{wE37:4+ u,ָlq4Q OBQ602ݕC\F:d>M\{Ė9SJG|X5q.uC'} mB[6p5 [7ΙK׹v,6cӃZ`H<ŎT$W5(`c0&'0Bm$F6 "՛z7zgl>娿p%J.󧴴9ZU1ΈQ6] ^u95ʫd%>CGBM&X`WufA淝yū0h CVx4-nR(d 6 bB4/* W67wWF|53ۀضРEtS9w)0{~wX;עNLjT?F/\Ȕ_tKcX9 ,oͩ׻[{t3E꿔olװh\QѾW?+$۴uS!C֥[ E$(=9>>d߻vː)ܨ.B! E QSβL9:Ԍ"_1r>Xx-V4z]XB!xLQk[K1*yN!sJ) S 3VB!9Rl rc|B!ӭB!B'IQE^}D^(PxlB!ijK2|h$W~ș xI> !6)6ʐs" ^qGbkoYذdtSIY!RlNFd+BEr LaOg!BeBnc23j@1c8a Iu̬t\=~1u5 R (|Qkx~)SOYi#ϗϦQYl'Ewӭ[{к[?ޙSI7z=h e2$sA)'F) ?AmL6#;uzYh3u\Ejrc u:~.2˼ĭduoLʗ45}+D Ȋ7gs4;f4?d;aY_Ս8xV̂Rq∷tawXvoL[@֗W1l ߘ5#wQZ,O)6JQ؉/{~fd@P鉉E7TSGŻfA3ht$uGKԕdV5mqyC U+`.CJ,6˗cI7V`be}%&JSlgkamXBʑW|6N ]'f/;N+=%7%z(ԥ9 !@~ԯ `(U*4(UG,^Y&g23tסMV zu*L_aFydiMҡ0f`{n^Ӭ%tfƟnvT#Gf8_;X^*1~}<0uvdu5kFkvN.TP|!9{B]jAE+Xu ӚG-<|N=Ĉ>˱jU蓧JԹ❖v("7#Q dY:Ө |?CMS0jo\z qSf%^H1g4orEɡPִ+:a!\sAv}bȒ$Vk>SgO y6 6lQR@lgy&ft$-:4L} H=TS1ՔޒЃg΋<ɇfJHu5 :oTO_-i(sP`j 307L]w}@!x߅7<̋O U_s|w8;|3:~oGBnhA,ۘH$:̱ٕRX4*SSiMyk~çʿakk5&87Q LAu YD>vPң{E<,iBibm]b7e=z!5|&WE2d.X%uJ2J q"77qΞYmpPf֡d #6evV1kݒ3V}&7—s7C>M=e [OF$th|C]x{zO奤>IwӮqͱ7sSyl:.7bڌ!8v }@1=JV?%6foXȚY9; ڂco;WiMCb=;9-p h1FM<Y+iq CtGKZ*ӊjk\+sOe >K?36]$;*wxZpF=[E%\EŽt!ޭ|w; B_#F)rsweA,c~)3G# [\m[V`akZ'U&UUy|s:i,KL'jT2QS"G|T*IY$ePB7h`471T}#s,LQ;#;>1$dꉏK2)Uod$N&IO䧓iP(|7G<PfcjT24ZT6θkW5ne%-{7Ӹc[Q+aJT*((U*T*G)jMzv ҪO_y7Ԣz;;N ah kۙgJDƵQySxGe9\Ʃ\9]0~6'wpQz~Pڽ{;n6A> RоSUlGMt}77edݫx,\ wգ\mg; B#èJ+#>_3uM%V*.0|#>Bu nTEpec0BE s/G=[ngqGmǨdh:ipHCDSw%+%7S gS5_+̕\(U%P0P:ta#_ض1oѽHᏱ^lzd< cf1`co; R8s53MLG17qV&.U} Dt^uW\F.!ڤ*ls? \ľxa-tS UδU%[~ZCA Nع&N8w*鸜QrP!)67wWFf̯0? k`cg&j3b`\=~ #ػ+YX1gc cĈPd4TjhdIJx4tyGF *z-9w'IƻucLEΌZoꚌ `hnρѺJ1>tSk>,xC3-*cz-+ָ3n%FHu[nB[ =xEFW.(.KF O2s2$b]z*j01A聏{&%Y8|$q&圱5\ϳHOdOCk~ۙ{z +̰PIƁ;x܇:҈>ELJ*!,V kZ!]W3dl9| W.rv>3{Ҿ#}؆_QY7ٰ8膯\9*Y,+"E/ ̨#=1ۙy^3A!xZɕ2ݕ3d̯6'g4hQ;cYvdNǹiD"2l3;Wgx>v iۖ{#SWYqx Uj\n딱JE.iZNe?&Өkz8եo+HKrL k T>d'{ n1P-c捤93=|j9GwGs-4̤qʧ]C{Fy}V-Xǔ%>#޶3s g۷}řuPF޾[8^d7+ؼK}a&6UiiFġLnw)r]s2xi,stx 6 @DU|I ]'}mAcʹz 碄\؄?&sJ7j===]pzuVַ}?ǺOyk@Z/Ҳ=DPT%ĜCQ%> s̚Or$,N㸒>-Ë̙3x.2ۂ/y'E󑯵eHг`ME>[n%ۃg}|کk󄄄hk 9RcNiQL˺"GOg%B0.J6XF'qJF> !B'I!J̜+-TCJi#B!J ˜΢˹OL>TQڬ۱vB2N9Z!B2J!BQ"("B/ "B/v(B<6g!%Fs>4+eKM<$BgeȹS/θ#aalXE:h$,B)6ʈs'#Z FТh~C&^>8RC)|."!QRl'"Z~cВ\w3' A3]%=p͛SV}DRw!wfET֣Fkwt IDAT|ytձJX,?Ǐ7sk+1<;Fc4\}x!Gߖ/Dh32IK`4h3u\E4V2t@5o?ͬh cȩߏzҪ5 v4Fm.YxoZWMe N*2Š͍9e)3'YS)z3b[WWVD>ii(B=Rlټl;FEZJv/UP鈉E7XZq9xwbLo퇣j^Y2M,ߨZM?^ 5zv6˗cyhT 88{*Р9I\1-z3f]eTIsQ`vB!D#èJZJ&=JRB3u 5܌?sttmۮmoKM"wխxgrH2@!FxfΧxE;l%0Cڟg;{tS9u;{}w~E\<{=h<.kfDYEDSs1S7w6[ܵRiZ_44L3-۴\Apd`K.xq|\~8ۢCw:Bjb,'na;_ ;fRO(z=x|$x}:5;CnmLm8T{k0rw|y3_[uf䤱43KDD;M*d> : tn荫O*׬D)R]SQQmWn [ʿ0k2|(vQӽrM{x9Kų&M{`\|5d΁RXqD[xj;mrtuȥԧ5Sҳ.d́/|`wZhE'@[N˧s.[߻ C|29bwo;Cdyt}71_]ȡhT;Y"DFðiY3 N._kQɑRv&VSŇNuL['F+|" n6xD=ډV'vr_gK$!Cն*l>ž!A"-Tp2eY&i|Fs_-~/[g$Wg\zk;+%")tR},ާ3OߵqgGfS>^37DDSQD0t Bt+Q a6_GOq*OGLޏT|8~+;h/&6K"É@t6}hzL3| q\XݚNRl41DGGqvmLj׾^a@dOy?APQ='g{8;q?jWL\jϸ$4"_71{F?Ck9+K1$prAl3YU_zu.˞% YB ?[9_dm$ǻ4`E=l_5<š_v/\f(G9n53wx L|ѿH~隍"߇Sdtۃo6`k}$@Y>|y4{w>jAw/bx7|{2s(Zdű}`窴xb˟osic9~5xr2&Y325׶N>cvcҮуN0~~0Ld|rS=<+YIṰL`ǯ\@|Ci~El_v#ylGgpk Mf>,@ͩ(M's'۽g M!s;` 0b6a^~UX&)ǭf)>SuI㮴7ޜƱ3Y1DDD&ح^ܭ[lWv|ڰyU-Nve7ۤnas] . ^,{J=yq*hr!s_OPϠHFC晅F g}8ǽ{ɍQyO6lEYDDR!r4S/qz75Mv-P"o#D9W""""6dCt]ĸ_s0Lيtj[Z/t~18[dCSlSQRT6n ;;bpn ;"""O8P!"""""6d {W&ha"o"""%"0>{sMHH:I,""R)(BƺE0\=\69V^'hR,?FU@/s4̆/P48}|7W2QkUiN{>O6uӴL)k5l図W ?njpt+?]b/>A-<0pd^ϕ~=W.Kथl\ x ""6֮m&ȄqYme}}2?sF-(b0iPszZ?kY3wkm5K Sz<;~ʑJymզy^UC :>X빇sȫ'i77qc3dUulM Zq,dɄdheR ?g}]=1؟Xˑ},MrOݱW7Ѡ}kVD+QmY,X8İڧ1XHoݍ9?Yc+~gOm]Фe#* ""bc@0t@> G?CDjO嚕Z3X*NDFU_cM䧑i);GnII eBV ^u2|Be2ygrw- 8n)w?Vl~q gjQ=391yqo]t-4ߙ#߉\-&x?AՋU DDD6l zEM޶<3> 6%S>>8կ{Y89R+:e >bfrtѮ:#BV0Z&Lw=@ѓ]o^Ww=i|Fs'f}&/>-1`1n)2l՟-I1:`g` ̏i?΂ɹ"n 9CWnOeܩ%&Z=N_e/S!*/⛤ƌk⊁?䉳%Oc.[@DD$4qLM E]Z>[0t Bt+Q a)8?ⱳug9qdwϔ%D^N :tf~AF>4w58BsYbccH28hgك|fBoH3| q$[lLAgkz"q18˗,Dx콨~毓86n ˵D6$$G+=[X c4t6`jEJxݯHj8dXK9?@dOy?Υ弮H~hd0eYij)X2c7w0kR0&/ŋX1E3pȀ wʹ8v\OLc-p5hEFzWm2sGa}mN]6g,ߖ?яѹOYF9ĭ\?[n AoHM&̷% {4B2Iwpv8'FwڿsCx%n9o g=O;L=0UCyH|3 ɪN0~~0Ld|QBdgzjsnݲ]q7y:h zWo89a;oN"СCy^g :6㙠g-S,HnXm;ѽKwE$"yt9>\~ڱkemF޽d +@\yfa!R ԟEDDJ.]!"""""6dCDDDDDlBӨ$ڰtgŽB$ԏEDDlB#"""""bJ6DDDDD&lA{JdB-PDMYDDRQgΰ) ^4)ԟEDDJ6%E?Xh æ?ǪwM%gݨ Hxw)2n򮍋mʚye)ffΞd|4;~cNZ,"""d ó'a0n[nZ805i١CYp#cGb&91@H9Lzb{6~;b,3~3!OzV.x0N"\o' 9U~: 'sS䊒wDTIZ @*U ?vz~e 9%XV-V̩D@K=gk9Asll|Ss&vN;'6S* NXrSH輳:flndLp)i$^N^.#=Ȉ tݙ**st )˳nTYwʗ*WRF{\<<ZZ?rWJQ\yʗWkHv0̳-h2dh2n!Iyl[-JZ]tƧr0fCZӤ[rfiDQ}Etɀ9aWR l5Ea,׏.mk@G1gHԪ~4 \B }4B2uf[Wb k×h|97V3G;¯Czu%])l[sf֜Y;~춲C&g)D]k(?ޞ-[~bȤw߿2#Z2^?QKb7&n_g_>PbfٚF|9.cn1|JgRD΃J6Y´I4o.ZRTD [!dg-w5lYǍ53moM^M_{oHqk6 Xh׶p%ј0nbe}}2?sF-`$8VC#h kguKOHЇ}lz~5c/춓;&d3&/jVLM;O1g֏yL9*ULGf|?Ι];aW*] "dcb3݈Bm3ܷea:s#gY7K{Xo&=#X7c+GRB#J6 C){3nMΟTY 5bAmT;_e\>E<[៻WED^ sKa,߅9K||/<< fO0d<툮-ylҟ㹼ir_~O3\t--7fMľ_m߉Es_gNu &1&E@޴)bFӨ 9Mf_MȚkpr)wjm\2N3 2K4Lq^_Tv1ƈK֧o뇼Xg~UٟorO&wel8XЀ_/ڛ~bo'yovAm6餤eu HǍGX?~";e9"JFquuw IDATN\oZ9}&WWLaA[V Vb.S q˵D6$$G+wc1GpN8K|l; Tt2v`urϻ[O 8Y| |[2\=Kx_x:ЊRu{Q<}_'Oqm ^An1z<"dOđ}3 HDD4R˻6G8ekOϊC `ɔ޷lRIiz0eb6VN#x喸rXXޏVdԬh('U%|uV;yfa<مRܕ ɥs_aR݇hж9u=nY4uxpg ]W9a_pp ܒ{ Ub$9nxxR/bŌ ɫwf|3?*跶#^^zjsnݲ]q7y:h zWo89a;oC:'gPYq=m"۟S0+p8GexjW$k7ޥ"Vu|w52۶mwށ@2txd E#+|}<)E?ɍDCDDF+"%P"o#isuZz_wSq=EDDlFӨD187cu=O#"""""bJ6DDDDD&lA{JdB-PDDDDD"0>{sMHH:%""""Rl)(BƺE0\=\69V^ KU0.eYՍZ޵qqvm?BY`#9Ō9ٓ ߛfoiT˖ """"RlaxqC? ooZ805i١CYp#cGb&91@H9Lzb{0VCM$ex^N^LߴH? !=ޥ5 ۵{FU@.Qr՛S'7 TRCnFǜJb|S0y 9{g+S"62r $a$?^ئRK >?īng=$fRG)tWnXvU~u 72&x84/'_/AdLZ9aud6O8hN"FyE=v<:i<=w*nԖ^|b """"RP4-oh2tezRZjNҸ̓ؗv`oIMIǿ-6gOqzڵnM˰\pV67]-Z5M Y3:WʧZHKyeÛ1`L@9XH=G}z+6ci\>̦78>m !aC{.lD7){5W3wvMqv7j8f%3ؗq3x畎=`@ }x7m ~йJWn7&3+Ƅ] },* gp^Τݺ7&rf/?~ !ϊ=w(`;9?vmeLp):{;RS;˟Pݝ9~0= Z͉ĐIMzj[ɉ1y+Q)zє9$ՀKE?3w.~=[;])j>9,f,fr|-vFǨ\!&EԌc%wf& d zNO2xr!3:Q k0s'䛋 X[1.[}U0c0h6zakĜm[eְI?i{kœlZ:.`?pycfxuV_Eer2"""",%]L7 &\_F0drZQ9=aDGxU$#~'ײ`3g>EFgj>Mgg|0@\/-+نٶ0IذJ8L00LL&fOH hH]sH3Xbb.G߳47=)jvZ)zG tg.! `#\-KE 0G2p&ÓUulM Zq,̠'Ѧ^m셯]E: 5߻){ 14VaV#ԛ8#׭I0a2ZHI6cro3?-WFDDD^d0t@>~3eKS7n?\JvzNDF\W] O;-nFMl!~&vwzy.`@),X縈'u+s& `#rfoCtcزFVYcq X.s9<؝-Z79f![z vWcMmu8ڑt}Q>(MA\B<)0œ%c//,j)(@VM7ik|}6m kɥ4Qq-89RwV3t@|=H9{H' 'vkvq #dnLq^&>/sw*٭rNuL['FI{3<l;~:&9o'/nnGX?~";q۝ml""""ň37%:vjrLniӭF]"$8!W'X8NC1odtCs׫ҫsY,Y}x߰z)g/\-g⢉ITr-* |2I$$x3=| dS oSmš{/;Z1_!gg M}d*2GpN8KGϳx,Bv YN]p>,yW3SKہ5q{FU@jyhxGò,s Ya,1;Z_5Ci,`4uxpg ] b6q6:9˘ӳ=s2ׇD+@rKr)k<"/fuAp2_aR݇hж9u=6ʮъ e<]mؼ^O*';̲mR7iSS0+p8Gex!{ f"͍V}h?A=TϺx&|+"E km6wnD$~nsyͺڱkemF޽d +@F6 _7ϴivCr#FxD1\dTQQ4m⇽}6k3KDFb z )֎?Dz\DDDL^>WTc\3H'L?x.G""""%Q݃ܐrs3_w)œڰtgŽ沺rVlM(PQB啠Ʉ=ZءJ60>{sMHH:%"""""W)ȇn&F= WMUW!""""B Uxw)2n򮍋mʚye)ffΞd|4;~cNZ܅%#ǥacQ+""""%xdhx=i߶#uվmG{xr4׃sn#aC^xmKxKǎfʺ<sJ*Idg`NIÜN $\Jd!,NJ3ؓtÇe[0g2U˺]/0v`ݺEDDDpd)XvU~u 72&x84/'_/AdLZ9audw-ᰚ9q"$ˍ;ak97ʘ)s8Ȣo|^'"""Rrk6i+0&I MWR?pmľVKjJ:>hٵ9Kg|܍Wy.\DocSjBקf$|"_ s . ߩQY: _/-{9wL+5h>WN]:u """"r)_~W3ԬQC&gxe숏MΝDi>Վ#0Ӡqm:ժm|jM$1NF[:fgiݟ./ F$K.\36L3˞e;Sv56-\Cyu?'-UUۘ1eg질J|Ѯmڵ\I4&eY_LϜQ 8/q1 ;hPszr9~E>󹂻+U)Oz=E+=Tz3|s(31 `0`4:r3C.ָ=,jzPp#)mi+~gO‰}QTS!""""(F^0t@> G?CDjO嚕Z3X*NDFߠJzE֌ &JcsKcM䧑i)Ȉ EϪ fdjt-όæ dɔ;N^2N3|JNO ;Oj2T bw?*V;2W?39hW!+\[GY=qDvwM`""""RqLM E]Z>[0t Bt+Q a] ygunj~d3>~]f#x|T)g/\-g⢉IS1GpN8KGϳx,Bv YN]p> Hf7YaN9_?\ΰxc1[I&::I9)vJF- }\{xV|}:eK|L=f֗zMrh`G> u Vfؼ(Cj8C^Q>X-/~kgs rQ~"f=FCY?O[@E"8yՠVΌoGRtd`&;"M{)' d c>.yh1)Jl_&εe71ѸL^acd]Ʃ Kw#{|y5F7Z^wo,uzq<ƍ8}'dr=!OMvϮ*MsSVDDDD%6(H>oYa)% -%"""""bJ6DDDDD&lM(P!"""""6dCDDDDDlBɆDy_xw)2n򮍋]LDDDDD2SlaxqC? m˭V+#8_&ޮ%(_-[[rb28G8G8O.x0N"""""RliTqqRMƩ Vm,1op˺ fKLtzEldI*)pۈƚ0nbswA+UBFmo*f5GsDI; [DDDDD*6#6aO8voəg߾H>+8c:עCw]Ԫ~4 \BH |gt[V3G;¯Czu%]Vo?,aTGi"&{2`fN3ݔHWF6v~-?5gfyۘ}Mϝoi ?F,\/bKyysQA[1_8@2j[&wp݆ s`ٳl}g*ޮƦ5kޘCmU.!;n'VF6ڵqO>ω=̵ٲ_`.g1<+dɄdhc6<26& vZiLjaV#ԛ8#׭I0a2ZHI6cro3?ٍwP"""""%6apA7L-?ad_5vGdtH۹}-nNn ?&Gw3"dev+\#.u[q;Nbh3onSDDDD(6ɆDtN\_nZ9}&WWo| ˵i\ 1nš;Կ:HQ W~>p ڗe|չ,/,Yȩ -('_|sr޵fXX4!""""TI6jyhxGò,s f _>L;{?h5 |[^ F?F<9g9x>cRtOG+2js n4 .^Ċ/W jf~xd\%|uV;yfa,"""%UO6 ;|Q'WR!TE>ٰi?<ʕ`0v8"rnTMaQH UF`ooO:A% ;NmEwr;]h)cM hw C΍b%ٮynAp*v('[-W_>ߥfȲINM6m\Slr3888yӡcƾ*|n ۪}*9u,ydZ NRSSqpp_\ֿ aH2eILJljѪ C˕"lX ; Ʌ'{"L2tإBTQȽAɆ؄  %"""""bJ6DDDDD&lM(P!"""""6۸{'];v-8DDDDDiT"""""bJ6DDDDD&lM(P!"""""6dCDDDDDlBɆ؄  %"""""bJ6DyCIDATDDDD&lM(P!"""""6dCDDDDDlBɆ؄ R""Vv{j7.fȠQ FU[M!2%u5c]? yEV |d7v5>cJxqTIQn#r4}9 {F%""= iʭ{z:W߶uJ13_*`0}|DmfDf6\9l X`6& PDx,N n6Y+fXl4"zƀŗҒ`3IW1\NM%d-ل=l-ճ!""m4n Ն^qG}eqsy}{l(qo<ʔ;2bI\oٶz˺^ᢉhSCCΘ͛k-rc~nZQ^$!'Ħwgн~×e\Ѯ%5f(=SJ=Hd*q#ԴUS^;eZ_챛s2pf_zdӪL)gת[kuTl+(?3,|BV6o퀟- rv~)zryV~.̸_jFǾ}];2n_9c.^x ]n֏#oԓ~re(]{dx_ȝo{TbiEn=&Af;Y,o˂\~LNsK|@]Ca떗1{)~w㵹s03&]L7ڻr`L9wKb3] 7,,Oo qe7ۼ-1rK16;jh:Ǵ}g b|l Sӟ`mpiClƲnRY{;6uVm:ȥ-[T?.$WXJ6 Z:3%JwoaoLZ{F<yſfy5gR0x1`KN=t]!qzⳉID݅Ljtݸ1 3bhclӍ`LԾLjxKy`ZCo?|j<*]oLtp qk',&/|-ݮUCV^V`0E^RԻq3/m:Nuq]np*WDŽ痰alQugҳc?3IJLߕΞڰJ yhVovudSŊo/CmnLᱯ)ׇ&ެk6W]]4$yog}#QȞ>a"6Bnų5O381 S60i*O[B=n}1zse.?_~IXv͂dzc0KG2VL%ڇPCSF]32)<*ٲ[7zŻ?[)66eQle;GGz{p WvŒiO/{ٛ_6X=}ieˎ<~kVZrC n( Y9T_5ꜗm0vۿ®B~) }}5H‘s5룳R8#W:ӗR1طSk 4yݸ{[p5HgCDDglT҇OL潥lD&y71mlHmT|1S=2yf_;_m=Eh}fm%vwb}"Kd EƈsSFJlMG^pD]ӎc7>ȋ^Ro#y7E y㩇XP`ӬU;N>ލpŭxt8vOHVUVժ"jyvP~>5Vb&9G2}p6I!ڻzUdk%F_gL8Lشb1+6ĐlS Z>X)0c|؎KMn?nYG]xq٥^w&iͺ5ȡM9a|>}^9j|\ʺK& {ӧM*kuu/_7|P U,.JԳ!""sG cLFIevIe q[c_%K~u5܎YפUq;p=2SWuƛ. muzl}K5܎Y$ǰ ^ VφYmc9u$Tl,s;eٶ=:2M*k_O]p1ZYef)""<ƶ;GY;GY;GlH:+`e}ssԳ!"" q{l{S48β,5"d8#n֑Rφ8QT\D|\ ,jUaeee휺d)""6myϤ$]cSRZB|ڶi[cudssuTlRSRmy;(--u{sN8d$5%@ PcudssuTllǣʶm>VYGFY;GY;.YGJņ;E'I9ĠRPDDDDDBņD  """""*6DDDDD$*TlHTP!"""""QbCDDDDDBņD  """""1խX|!"""""'?P^b1 VOP6b}lt]DDDDD(?P T,KIz6 $@R^'~iz @{9B=F+xrB#PsEDDDD uH,8*:4!ԫB#THBKw#TC^FUd%""""Tjr\= pxP!""""Tf oԳˑFU3YH*ok09Gណʋ4=ڂ VDDDDD&SI *FIENDB`parlatype-1.5.4/help/C/figures/parlatype-prefs-waveform.png0000644000175000017500000004702313176574164020715 00000000000000PNG  IHDRl@FsBIT|dtEXtSoftwaregnome-screenshot> IDATxw|SOf4-BdP'2\8{ -({Y ҽWҌRVI͝뜜B!B!B8sBQ3J t t@ :kZjJ%,BQl65///if̘#tU7 ٳg֭[v:jӉmBKJBVt:8+77_(*Cl=`Ϟ=jꦲz!h4ݻtm27mM"U52nܸ1117HX !Dq8-[-^>U 2NOOջ~,m{޽uײmkTb]ghT!)YM[/URkB_y<@;N(TCQ8P!D0 FHyX?;NyF+nUϰ%޹qfXk*n*8 [!DS^8=7UUGirSQTyBzw 5'f֪$"5l!9+/'3l!hUVD9}]I[!sQi}RBGfB"$E']EY''ߩښn} _@xh3sfbWnh.ZQW#_>{s+7ǑVj{yQiݪ% 7ٷ+_1вGozw@RGВX,sΆ&`_()w%O&!!?33fOAA!OϘɞ} AGW(?,-P^?ȆMhIS{}s>'eR] tv(2uΓ >~оW4ǧMaKt$gfT$9Ny޳RJ"i! GX>OE{@o7uħt'|jeGXbm\[̳_Ӈ ꮹ )'re<]^(6q|>1G?KlL'rp0˂{Hw?w_ wz>xc1`nJm= ii}QV=@e;ye W2039ϲIŵE=Nbnލ?b~Y;#y؍~DMm9yuwlM&@!{%jiD^~#ӈj֬#rv1{ht[3<Pgˏmѳl93_@x/&>[Zuo0;о[J0jҭnKLp7>z~+?~{SaT?ӄÚVJe|h.3Ϸ?勏_̟2myHfGż[$gs M\۫+}bU5D_/j4 F׿ld+_qD0^ێ5ߓ&4({ݶe tƻo#BCbZAVc6ןxi1VL;T Ht 6ѽШXtrٙF̗N:XݢncaR@+(EqVViKe/7@\TOeAٿw;=-bWpgɄVӞkX[!Z39г*IWAUm_?<;U<Խ({)cICnJ S^Q֠m()!PFy8rfƳS|H:0wk' &~GIGl%s'cOmeV6dfZ7_n˥v ,:GZocD{BYEvn2I8ʀN$c:vZt Ek#/4Q.C[9gIO 1fImV;U0'DYsr4% |l/*)ǎ19+:a_2/H{f1x%-W~A#|-t\6_۱z1YOŒ`%<hا̿ʿgZC׫ ]&|h?N&ǟ5h50l5Y"ft[VM )  `ot#}P3P yz8@dZMmdK28[f c^ϡVk:Ÿ>l}y?_:{ecb}i{gx1j:C~zW3s԰ϗ/^$nQ43_Gg5a\4 s]MNDQtzC/eZpZOOʚuxXsfnx$/j/£;ϙ͓Vqs NN֮Բ, ?~߰|onN1fH} rޗŸ.Ot#07O7wgoH@d :N|s^¼Ol?n[m{_}o75u2ed8rZdjT}e(]~~~o 8GLu 򅷜8x_;G{) ooQ@)PRq+>R"E-)_ڌDTРI)KԎ|(22Έ0aZQctt ̧ԞDnJO n;!.X5켼u9?K$`MǎBtiGI[*|0GAfeMqS-7\4zKVow8 Iɰ6L.z#\Z QOHLB/>Ŧj7zŒl;Tİ oG65 Dž X(VFp: WGQlu<3_fNhyc:|Uele_tl^Mhw&^fcރunYBº/hیW!ј,'[JjErD`_r\9(v( mp;{7xq%SQJIāՄbX-1lڒfE9\JlՖ(ͰO=KDG`.#{wgP`n DmzC8Vmys%d]-=Ė? U{Wڎ=9W[$J~ͅ 0v/fŏ'1tՅWbŗ}Qϲz?6{xW %ok/$j[<?JɎq}7a= b7nip;_ȶCDzNIPHqBspMNm7Px`]c/ghBv1Tyس\EiN@P Yɶir`ACtQwJZ 8nnc@IdgP#^! r(8aC8^]qsJz;wY Blii$X*֫(,K#13 ?m!8H˴Սh4}gM#Ŏ=J~Nt o_͹eWOUG}2Vn:DD{6tMyt0N i ;iy8%SmI1dSILM8r2S`o[cԝ8%S1BFqiv̲V /%T8V\yZ*j@Q*^s\۟DN"9vɱj<ӡmS̗5g $3('FT*_wH&3K!PNz#|%%sf)Dd˱t [E׍'3N}O~]OY d]40}?B #6+:\:JHgs?Um%`;~NL}]h FEw~>g=Z!&(GD(LZtɔDTFD7]ԊpoݙvCYeEn*{)V@oĭƵ&yЙ#',RMcя~1^g}wYjOBu$K`<"4>RH8X#C<.lZu ,Nx}T" ;)B>~蓲ILRS6!.Sj4}g DjqVԣ3u J~-[smr}CNLKu7T8IݻMx گ C[}̻'*Ucj b7Yݟ־PIqF 9{KâeyKP[ih5JRjqO]J%&蘳i'^xЩU6C'9Ǿ( ,3 M1ݍZqp MF!uOSM% nyw8||2qԨN}E}* ĬN!&^)nFۑF(l9dXNZ Ti'-6hG W{4PDdpGѼns}ƨ>ѳ{Љ4DҫY eGOL{>p%0ܨL!g}<1zm#[%?l'?*i 3O55G/%u-zsYf4Bg+"7;Rj5պ ^ei%ȃf>Un&CKqF2]Jyn* G(UcԔ޽9n;-#<iCQ:i1]x~;@> 7_Wȑ8A)Bwxp#7LՀ\'2ře qpa4\ƥSBF2K$"F؉IGz.9KDq^M`l6040 43j^:hjvfov<< 1.-{Q`߁XeVRϊB|b&|k {`쀽ќ%"(<&B\b\,Q= k!$EH` !k<%wYW8_Hd-.Ν;kzZh([li!!jE)~!uDRi}BqB!-.B[!\B l!pB"$EH` !B!-.B[!\B l!pB"$EH` !B!-.B[!\B l!pB"$EH` !B!-.B[!\BmRv&>'ߩƫI+\~#қ]TL9X]D[Af`wq3x:v Htڎ~؏㯏g1mA,)烻FrgX|3-S0彇vh>5 քO羏Hg;bj5}G!UuZH;D!ވN`MyKY#2S]Ȕ[{pXsL EwXǞb3->Mf4wb'ȫhv^㧗DկCmz,{S,x7 N&9@ U[Z )(uTgb GgUakF=߲瘮niβE/~:1r⭄I<7w4qFRg|qRTxsy -ۦ݊OVˆo&Ơ ׬ߢ})l #[goX*.fuYB $7'Nf,h9y:]MɬWGM$ZàJJiD C,՚廰ђ)3axePSr=_5֟OV@+TpӖiC]D+(62aC[Qj]{f_>BW=P!vSrP72x n2+ [Kz.ۅsxhML}E sH|Z\>VCi#V[Q|Ueؕ:?NʬAL3}n"ǩ;fr~~?~f:]*ڌE_ɛOqP])Ӛ H,tX҈a* J^ X);KpW@9Wִ_!utQKIC,.Kn蹗?=+W ( qCЕVmߑ::=G֔Qc}̛6W5`\Cܐ?粮- ~ͷ衋嗓x dX IDATck 82փif !DD(n<r/9dcɰTLq&˅;,[WHSy0th 9z`0ײE|U׆5涛;fo;3Af$vډnqbl=8"<8a5nO쌍:yBq&UE93BJ5 (J*n'\ XTa!pB"$EH` !B!-.B[!\B l!pB"$EH` ! @N'$$$MQQIdd$j̫D9Z l޼DTTxyyPXXHZZгgOxĢj}B#EQظq#G_~p8p:(_RPh4RSSYnH` lذL JtsyF&00޽{HE}a eߖ]$ʷ ז82dp8P7ݎ(\y$&&Л!PvFA'ݮ=~&xod,I>Ͷ,X9 117ǥ9rwNwJT)l}vޛLSxk[!/S>5F/o@Τ)_8lB'gCDӦM)+CeeeDFF(g\](~?s1~xgu%fOXt/ vIjLkR@q@yEq;</g}PRʟ`{HzsNUYZs)3Ӳ23&6n)KËfF3Q7}ξ72bHOnۜEYpm#ETyQD(5 ɺCdaEupHʿH̵ MSd|3j@v{,qh5;l/iqIW51#*P~~~l޼G\N[nDGGz?O4+b܈|97ib3z!dmvC)+$=|O4}'@OT˳7m݉?ϹƷCPʞO^L0m=<7/7zvf95IEWɢGCpnӗ_}p`4:ìVcr;TӾ`mgN}7/7ƷfQ eZq>YeJi&Ykhhggy`"61w'ޢGC  c5pqUBSߠy6C]tY+ a,ɶm$C3S''Z|"g`x.⛧ 6 lB̕әwK'5^-qsPϟȋӭ4Yr?jMִd 5iДoU9xb6?{ͱ)k<1)βq<l dMWe  Zl6T|C>+^"*L4hP-PThaǴR;hjLkdqd+,JČ_dzxko~=1ϾΗr$=c ٶyv@è.$3(Ï?(pa@(q%%QTL?X8.&U}׀3㩮}C5 ObwX5|8czzJvXc{cs=Q`Lw ^zo'B]?,d[{"##IMMj-c3ߠFdddnsZ'⤴0 j_3z%ƲyzwO]e@a[V0|{'M(NcнIQO@|ʣ,(tؔxc; -yU$|7Ogk\6VE9'Oͮ$x TtqޕDۧs1jwge3~M.3whfN̈́waָЪD^U5EDFFqF:%RPT9r*}Ql$}>V޳ 6v0s [>*ݓʘrjMmr-ѩk˖-[h׮M4͹jj5ٳ={əZ"j-ĥe˖n'$$777v{'DHkZV+)))$$$!a'-D=߿?֭cb20L3Hv;PPP@RRׯG/HRѿ<͛qssFS~Fbj2$5l!KLL$++K"?N@!\|B\B$EH` !B!-.B[!\B l!pB"$EH` !B!-.v]v&>'ݧ"43͗KCFQ,.om%\-nWYIK޵|w-?o~]NИiٵ-pBX-v4cA__xm盼ѧs6޹nBPs\ͮkvQP^z5XL\-rЫ4l M϶"ra?=W35.m|3AFACam3ɳ{fq,~Do+ZU]Ph/7 :SmO9/:᝹݄vsG/Q0\%mc'4j"XF" l~!h|Q(UU#_|љSƾq,[p3u~U!RF@IŭK|kO_ G "TZB[]zV  '!\Ic=hՔ"@ Rc4f9(p--RBKB l!pB"$EH` !B!-.B[!\B l!p r񧄄$//ٌ?DEE5Đѫ.))aݺuhZt邧':Fqq1۷oڅqou (WBԭzZ_II _5I&8NEAQT*U-55?nwj7Ҝ~$>w5z"[Ąfޤ}!FMWo3k2`Zg].((n:Z}@FyۚLƈpۣ0Bz xZ-X,s.k $66Դ1{W*-& B4"DGGSZZZv;-Z ))BV,rs2yb#_zyb#,=*PRs,uV/"{b#7ɻdŚ$8*: Ywd|!4Q=o'Fe?bK;'^/vrx]iꧏZs)3Ӳ2:pűf|>Yw,̴u#6^j(b]+ؙ4oQZ-/Xcyz|R{۱<{vza1ޝyk|;΀`~4C2ccjUgr~ Bƥ^;//N^j˫~3j*UTe:NbShzqc1wU w5μa:=9lMgv['10S4U|7gp6ӽ 1!ՠS9(-#,8:s&I{=ІQ+'/WٞK`{{{S\\`:V\%Q>)#Škp^G+eK"$-SV cdȵ!5ڲu !̳v>s+|L|_ot}ojEٴz 쀀 Qh4I@@@ĞK,_fK^r7]8w-x[-R?<O2\ =zz{*T8ڕAL(_V,@LJ6l\a.e'7!^CјG#""bq8gzV+ (lY 1;E/ C_Fub鳯?IX~mCԾ=ª m鶪{3D]$z[I'Ȋ@@9?W#X*wew;>Gߙ%QÀQP1G dwk>V=>7[>#ĥ^fQQQƒHTTfl6FNݝ1 1uk |5s藍i w>‚;c0j([_y<rulև~W/5^g)ŸEq3p_ʲ?MO`ۙ;s4QfXo _QZZJ`` Z n'##\Z"BQK]`@RR`2 $""B'Oj-T5 l9$%.B[!\B l!pB"$EH` !B!-.B[!\B l!pB"$EH` !BQ/_{$//ٌ?3Bq%%%[VK.]boׯ|BJ"%%%|״k׎Aa2PTl6T*^^^ 87PRRR}:jzʙW3h]|Pdz$v !ą^v- ((Պfnp8l6 [f S~a'wX2˽;?~[j1!8hZX,[UF!>>u\1%Y+Kngf~O Ui0ybôBR/5d)--p|/]ʶ;ݳwOOxXv-ZTB<{&d> /U)>]ƀy{?eW.,c|YiF&=xm\ٙEy4.o]Dyic?k )#1׊.#7M}]̨ŚKfϻ8VY/ѷ k. qYy#O=1(F\oW[‡9i|}ȴ;Nj"MӏW?}]ҟ؞Kџ}a4՝kB}!Dm̤y8'f -[׺ĉidff֬]SF=r=O{/onjF|=/N,g[O(^X28Wsf,{2^KsDǸ0߯eR꽧tfe۟v~6XA&+b;Ҿn<Ugr [?//NWY())a,ϖ͔U.j˫a*-oa|5_YSμ|GGΧ ǖňKlw3__;A au ;D |ka# hIn:޶Fp nA7ޞn5p&bw!&ď  Z :b+jO?ZtdWlO@B4 TÁ@ҧwSؿ?T.SZZly'j/M?my`B3QN>?Q7OU@F>t%Pi1߂0 CV' `;Bӏo㢪?f \UD{QxRKͭ\-۬~òo]IKVni$H"rOrf@0"x pΙ9{>|wfjךZ3(t &̫~9=sIL>1]jq lHII.jy0wO]z=%%%:=6ؼUt^A89W55ϚA>{ q5տ%uye7_zq<?4hP0ۜL[yxf\l"۷ c q֓j9Bܪ$#""HOO WWWEۛ_xud ELFFu|$  ;NˈN&v$nTsHp:zhN,_h563#;Y57e IDATKTM|}Cdg捥8NNa1ŗFZq`!R/p7hEٽ#$DӀN!nM r122TΟ?Odd$~~~L&.](t:z裏c0eZ?OإKyct:#Q?ͼ}; ?gJ֟SyYn'' HF9ez6"+Aw?#ҵ9#'E 03@.`[!_^ˇi.5chPs 9kRd2ؾ};aaa՗[,.]DAAYYY :.7cv5OMͳ*BFJ@YCQ\\Kl6rss1 2w`(+ n7y-!AƇ###L)))LJ ڷoy>XP?}j7+ɜf!`C",!6!egyᑶD !B[@m[!JH` !JH` !JH` !JH` !JH` !JH` !JH` !JH` !JH` !JH` !JH` !JH` !JH` !JH` !J4'dgg7ߐ^LJphҤIC' .pIu놏M/..fFL>9rphJT)IMMcǎxzzbnZ?9bШ }ɖ/~D s%l+X2ٱn+G _8ʧL4uߺG B YYYxzzbZosƳi<==X+;u.vyo<;Jk65lվёYͨ߬.!4Ȑft? Odf5od$ѭ?IhKSQvo~J >^YMBiR`~">H'7ީK#sL`MGcasTk<>y O_NフxзG.23aۏi$>=bLtRF][ĕO2x8׆y`FU :ߞZ;gSo=I>59z<=aj"~Kׯj3L[u띙pV^̧g* ogWShwIǑ'KӉ(}!Y1# vYwv^k~z.rrX,EAQ<<<H޽%K[ K64x&0:Y<55[8h0v$4Cz`,8KEؒb`޿ 2϶sȁK =cJ֡#hK={銓=]@:AۈpHK.r|XQrM xn8|oI:=sf'kJz֢=$ݯ"xnjAc_|1ttjݔp":$NWb2`׮?턅)[vX&',}8bi;v@|biXuO؜ar/+(bI{(>>er/z>oBۭqLzM chlmE\0]O-i$6w0|>:ɧG@k~ny9yvuh3rBL @:9iZ| YӦ$̛W`2dqX,v;?o@pۖmjsx: |˳+ %[hh-Ѝ{I9!뽼ԇw,<ȗ{FA]ƚ 1{.τԲ>gtFb~ [L AMlՓ۵%'|_Ό1򙐑zs&ʲlEVW~ٯ?Fd?sX,uDuswjhоFOX:$;gmpX|gۿ?~pPZZJvv6&^zg)BqKh4ÀRT\v(k'**Vͻfǻsrr:!P鰡Μ9CNN /&j4BBBhӦ[BBB %B&BBBBBBBBBBBBBBBBBBBBBBBBBBBBB[U, `X .N6rh4/Wo\BQXsb* mgM픧bcsۯUBب l U]iaS6ʃʵa԰Bl-Tuٕ#7+ka]B!~ʬ\*C:lgamE.X !D}guú l!/+3m:: kmB]eV귵%R:B_9\cjjy+~8nv?$ xIENDB`parlatype-1.5.4/help/C/figures/parlatype-main-window.png0000644000175000017500000004567113176574164020212 00000000000000PNG  IHDR"sBIT|dtEXtSoftwaregnome-screenshot> IDATxwxnBoR@)A(Xb%?n*^+"fA-jzlɆM̦~g;sfg9s !B!B!B!BwiܜBѴ(.[z}^yۂiZ?F!)Sb>|ꩧ~Y gPyr t߽{mݺuZݎn!h4hZv/gv'`/7$%w}w׮]*!Rvul)J.,:$Cl&3fݹs%B!ft%jɒ%wOzRTaJj.Μ9)((hH݄,B`Ϟ=.Jo'FYB!h7oBQqkDh&&Lv;wرcx&ϏzV.B>W7, :NRC``#pqp$vp~[Dk4mRUvE~~>& @ ͛ W^BʕF~~>uZ.L@AM9pX=zcǢ0 t 8~I !h$|y`04䂢ƜO5*4pdB_P](sH!<_rhznO,Ń6UBJ,*BpF#O.*4%\hB4 |e2;p<)|ԿNJ\@.,O]!p̮,_ tUJͅB&!mOߠva ! |eZ;5(!ɅB&!,K}P[U>46].MC8fWjmyGk.Mp`ZF2B!Tj1.M뚟jţE~~m۲gNZhMXh 2lfGQVtv=1~i[L7q[{Byf)6m.Z&2Gr^ڶn ԢշoVy>܏ h54C=N>=ӛU VM̞EM壥XsֳRL'ٲr9NfߑGꖻ>$Z)Q;m74]nnnM#FqQӄuuG_i2٬df,9]tȱT9f~-z:~h<͋Cu-)!DCQ2U>jL ||~7nuihb۷gdggÜӾ]:ǣ : vsYYң{/F#nmnٺ, W݆P4hP((`9w-I7.;]CC8ln_7%o_G[]r~vE7%Ԏ\EuT?񠶨MRxs<dž]+w#t^z"#,P,ebo:D'x>&EQ@KKu 1q/ Bc?ˊoC=HX*W5`>;Ӱ<t-1~]1=m5Z ,7+u  EHp0fIвE { š^raG?A톕~͛E9LDQ_>z_ZPGm3C|K?H.at0Ŏ&N>DbrmX7?P4(B41#^Vw_N1c'L/n]=u߰}/#wI\E1In_>|2yZ;Cǜ2w!ojϬxԧe :ܞ?C8}{A!̑*^hj'cCUTU =l?Mv/<0=Xʳ8k;g͠ǿm%+,N |:+ |껬[8O6_kWAMRCM\ɜѣ%m,9rz7LDOkm.|Di:}1W%88U5?JD8_Y{e_3Cc.*ٰs C,/ݞQnO :Lxr?P_O-b:rUmdI2M㒟aƔށX> 2ΐkUP,S*% ВZדrTb m/L=:jbwq[W}'׶Ѭ$#R w`3:£Oe뛭_9Rhs=*[ݷŠ9G/I,}uw9E襁,WxȎb\9fÇ`0`0\XPq OˡC8 "ДG?o3og4C<r}^<|Q$ ƒla/}dѤ]̿gt1Kd_qjW+Pxxd9o_Yͣ]- Zql!C]m[P]L6Np1zb>}3-[t˩SFBjsq!:w _&0Yw||y<-ҦuN>Ž܏bQ1.LМ>><~s| At(Uϫh?>o?'k;h*4|`9`?96spTPz5kz߲H߅^`]ψݬ ύw$9M^rerm._V m8n{c`ù֧]] ;b ~q*j2sX4A8C0W8-(=,{sL#:I! m.233=Il߲ ݎd*Ij]ԫȣ5wΚb`0#dcU]_z!b5[H;{Ѡ`-,kc f}:£Dxwuƶ@%;mC ?0!_) plyTڎC$hi-CXs|; RC>_yy5T.gtMѨ7߯(pǧiw/a\!`4N״shMͅB4cve14û`8NaaaN`^z%BCCIIIqi:t(ڵkKMhhKvPdeNHH(,ǿzbŊ죱^~}xV]FFFWZ=R[xӫݞc's츩|t:ڴi͛WGPT7V8!/ۦq,ꫯ2cƌżyؿ?ӦM+hj֮]K~~>{p*q->>L9t֍aÆh"+=g_?ݺu#99٭͜9X]1k֬Sdbcc9rf*WҥK0a""" c`({ +M̙3aѢE.'33S?2p* :TIIIQe=֬YSiWbcc]W *J%YM>͘1̸L4k,eҤIJRRRh"eѢEJJJ2w\eرJbbb*SWkǼcccZfiZ+Cll wbj߿ҿZRS< ##Cc@wt\KJJQ6;3::P]H$h8{:&SɨEUz9sfmVͥ帲5)wՑfe͚5Jdr}M.AgS8Su ljҷ֮][roS"++۫20~Îyh44 wƍ߿l0m۶ lyvekJfo޼ye2zhFj_O4,<s;t~ΫP~p^W*Nj.ԓ*Jrr 2UCUW 1co<,,oHǜd[U6$lwnyz)jBnԒ+;Ye_uw>}x5b̙ʌ3<@Q>}(\Sw\\ǻ}zfKo8ubϕ֬YmP}&8%%%)QQQ.A䢖,zۉ\'wÇ;5"))Iy'ʔoJJjEQU=xrv'펚λ9\и~|v{jxr_tWZkK'E eff*+VPոN䐜\ң;xeCnUs}hEUJޚ[e̙3 wj67WjWƎ{Jrr\gmwݪR確g]M^^qjSm$''ӿZ?wMG@W:>Kbb~(<+eYBGu;SSRR\nLnn.}QWzJMMcv߉)qXe}5#G'22PN>MPPÆ k\dff~וGspZ20% @IJJR4MIIQ :TYr~zeUV'%%ij.wql└Wtر긵>sbbǗQz.(0%%c V+M;V]nwPC]W׶ĕퟙʲ|ͅ#TܸBtd¥{LMMgڵ\R =cǎk׎5k֔+ /}طo_X///X~=Ǐg߾}pqXv-gΜvʎ;*w^X,~ JzĉhZ7oNpppw{ܹs&880.._EQZPY祈GW/f߾}?655oRSSˈ ,--={˶m9rj5o$%%uS`rBdd$>>>zlLB۶m駟.m]y̙%w}<]mNTTW_}5SL!++~͛7#1k,f3K._P}Yqj.N.ϟ@AAvV+NGaa!ワ/^vz=6, hE]p87x#Νd2ѣGneF#ٳx{{8&;;Ǐ7&VEQF)3fOhN(yyyXViuPz=Z:zNۛEQCM.~qYZZE_ 8iӆ,4 !!!hтl鸺4 X,#p0`سg`Z!-- |||d2atԍZ#N;Wgr",,E|nn.%a6tWa~NeݎV˫g~~~uzX,&PɅ&2vT.[]v-K,?,,ɓ'*O6-g#k 2 >>!33SyՖm-{\qA\(μJjq/1TޥF ISpT;vd@wnLWguknjYrk,^Vڴg sx]-㊥Ɩ jrd$&&tACBVW6-g͚55ڧ":ngʔ)Uי-66˗;=tRRRR$33Aezvm1t\y3 !Ն_p5Z՜HHH:%$$(}ku̙3=_c֔k.ݪ>s6LW98F3~]o:..NrQ3sLs8j6ۚ ҠSEuRUYg/ZhYi_C۱:I.ǾP2W:鏌,֭(%jHLLmӔeܸqu;..N:tǎ%ΎUSL)%$$(%Jj,XWr&ⲺM1..T^z%BCCݮup7`@(fΜɾ}aذa5jLy摝ܹs_hѢz!kj\o윽Ι=Q;k׮ezf̛7DUn-=-(%ꫯFӕ?KgSNe2i$=z4ȑ#@ѭtҺ}qYSN.<7`6SN-9Θ1 6ЫW/>s}B&onJ_֧&n[DJjZK#;P$hz?P!ąA[!B}(B!T%ɅB!T%ɅB!T%ɅB!T%ɅB!T%ɅB!T%ɅB!T%ɅB!T%ɅB!T%ɅB!T%ɅB!T%ɅB!T%ɅB!T%ɅB!T%ɅB!T%ɅB!T%ɅB!T%ɅB!T%ɅB!T233+lĘΣ>kȱ:]CrlN7bX~P5\!t 96Wkȱ:ˬ-B!$B!$B!$B!4N222 Mj*&L.LuFTMʡarh(x0` !BJ !BJ !BJBk6 R C 04rB!B!B!Be?" D~u 55:Vtft_ADFDЦd. KUr{7#QQt8>ރAB@ O;8ppF9X^'Y>>ˎMCd*%kxs^cB>~+5(Gr0xy#/~u,;?a'DZ5'yeYZ:Jo/3}DZEDfTN{+{~{ADDkJ4)[:=]"Zt;fKyyۯ\.$2إ p pݞQi|{ɳAdQgI^cWcZhr#|]qo=q!Ķ3d_q9tyh]3qY٤N'iW?<[tt\0n-䛷[rWx+Hb#&gT/O3ч1=?#n.[ G_d)Dyy`\ A `-_]g6Si{~_73.JfC{W8:V&YUT-76 %VEs$/J(nNuyD>RYO~ >3{?&+-o^~[jIr:GkG~-$v uegUTZ虼t+~>YDм}BW+Ҫ߾/_y&Rr!xGϝӤ˗"p:zr}$y+y !AZ?zebaGD9y'Yq;wꊏgWJ+8ٌ[[GcǦ<-"Ew9--ZgX ʡ̇>밝ͥ BNٳ-v6t2X dц)v,lnN{5mh=`k/yN&%}0 +s[yd|4g~7~MT\TrdmbQ2HO; P?):;$222Ej*&L.\ňK@} rP*\w\!̋Ak6xwwʹ o2wޙEx1fk&WLNx{q(Oi;<-$O!D%ɅpO ɓ7B4}v'OFvv6FhժZ &H 25R;ԟY lK!$ŨXpy⹯^bhs'+Ǧu{RNQPN?6s1L|4V'>cv hӹeL:Fw T;+9G__gۉ]w!;u;w$88XZhAPPyyy>}TC޽iѢE=G,$ɅplFaT^;9G%Lm/l̾2_pvCkH۝'06cGvmȮ |00c[?sec7ek$ KϬ.fEa޽qeѲeKl6v \tؑ.]p)6l@FFݻwGT)g]٫Ζ)ɅpZEm)n#hsa>{gIcł% :;Xy*=.&3yPwlE6;o2 x>{eQ^v6Gbߗ;aR`~+OğtּzCk.y־;^N| QdϞ=dee1i$4M6 Bdd$&Mbݻ=zqMGٴwvZ-#:"C3CQJQjٺm;vm+3ٿxg1?'Umk.preۻ3Ԍ-&诠swd;B|C0N<|GuƇxOyw4ێfAzt`{a3q-cYlj E`}D#̛i m8Gӻ+߭W186+ Yl7 wW\(ljVEQ=z4'Nҙߊ8xh_㍇N=W䢰!RXhFQ L;???FCtW#0xeDfJrQ^2ٿc'Tyv޽[7VkNs_ey)F8ikDJ*'4tٓ 6|CWu}yB֧(Q _ Oq-c:.*[N0k&eĘh9i??:OknڵaÆa*֫:;v4ʳpԱs+S·ld'Ƙ1c{,c?fmwg_bCyKx˺!bb! Kٌ+Vra.4ӪekzvrQv;&d;qŊnl60 Y!????v!~>Q%j#{PR#=y6k }}Zvy c.^*Fˈq+| *^3;c2b\6 9g_ǵj"]}LcJ?,wA6sNe;ǚL^>?zGBi&jiiiVbQ: 'OT`<:誟$ŝ~u=kmSF`g~ jՆB|yΑ< ֒@?9+QٌEs!X( ѭ+WP-`Lvn cm3Fcx{?qa*\9vZa'O$3^ةAN[59?iowɯO=w|sg$FcYږOεW~1u'PV<ߪqSfpE5,ZuL`3fQ{& tpU2׽IQ|hѪ9ԩSPXsk׎'OҺuk=]<0la?&/d]h(g1{n=Z?YǎEqD5KEXN %~8-pmHͦ}jP;ii6FCt6t 1__1 tx5Lc0h4x{ya.4ӹcm/b(4[+v9|8vGVˇaލ֧5>˕ŝο<\1Mۿ>E/20>j-7P|[J FF~޳}`6ˌߵ{';wSN (vE+)ssr+Mڵ@.=j@ŷ3loOf$8ο?Կ(yZgV{$IP`^@ZΡI,\Y{GxGb訶1^9LDY_*{sü뱧Е+\ǴiW,Oɧ~0>G3v/K{ೳpuoȓoLJsrC<w'ƠVd7-\M *LJ>ZMD+ Re~n@պNWlRʰݻN [ir]xٲӅ&[!U={\DthzsgVbccIO/j9~h'^Z_V:_x,0n3agpk h02Ɖݻx]AQh0Xt$})bb8a Fxo>ObYmJv¹ۦDm[جVWJZPxE!J~f}l\{d$AG i#dGWnd]-.cXa߸≴vC|0/?XSx#i4Y/eQ~iԚ0?=^Ƭߑ=+uYN˄rq7ĘkտבbB?K՟5E\}LVtAWqrkøۨX,m1H:h4|zرJ_(/tNk֭cKYn11m8z(Fâ1齊oW\EE׮݉iG>o~c0W``dIW]MppHɲmOfd&MBpp{AQl j XifUH E~JChBqral JQ?KIshB\u;%1l%pbA;H+HK?wWޤ'KIZ@Gxl?Fa$oO<;*9}Ϣk|~5MdtY,t +G9e<ßL Un=IҜq-}<~={U<޷VȥW'??vo)ڵKG:ԒHmҭ ?MdhhTgYz5NQ 3IDAT%80sPPPPO[R83c3X~^"\uz~0Lxyy3_f""Qg5jm.5kNVV7O G3n/ˢ?V+5U(mJ'j҉ZN]СcR"to3,BՋ[oە(uܓ'`:"Jb3i*] !{Lsz6/6U|gF[ w67X06C՟ "Tβѡ5G Ȼ<֯_OFF55h8w9Rn ,ϟ\ Ny,^}[;(~⫀Ck~#Mt ] nm6FzzƂ [uHrC چϩ\|o鷡jdggcͥ_ 4\8F oJ^^GnfTqu7兢(dggKrQۦY(222y FDłNo⏭[Jo_^ ;SȮbЗ =ŷEt;yyoZ1P 8Ï%&݆BNz,;1+Wa'wFRFv Ks5(sAc ʼnO8_ WbeO~ҵ?ۅc=M_đ0YCb$QD,]#K_/e\!~5t&2]^:g}DDTy@}}M{-};sǍ-?0CvvvLdd$$&&N\`X8}4;w&33#q֔͜O~h S^.:rvUΰYXv<v/ӇFS^YWպM;o@vN>mZ`h,mb_Igmo6;_oL)kpxd29 Q>j|NN)3oZfM_%ZVVV}c䨐\h |=CvS{<͝q //<?ua7'9>0i7Ni{j?o So@qۍ X=qWqŐ>tn?nY^Xi̘8.fyli{ |[wbk?{6ʴ.`h6׿B|#ѵ^x`KW2XrF\o4-@3HGˏNmr9IϽøw;|ݼnѩ;AŇ4V^C'?OxRVصkǏ'66֭ZJFFرcL&ZjhUȱpS||8 S_s+Xvwy`Y!BZА?<66wSPp& o[[Y*-rnYRVYc)Xe5h{sWv?4セJniŤT'FefmU>*6fWYtA2oGӅn6}Tazn7vMoM[&^kɘ/0fv5[rczu^ϵAkL~٧yVgϞڵ ???ZjUҙVuj:uz_yFeo8)z:z:FעE ~b>M(ձ &ym8iYnttv )[ Z^z" "x @q=x~ҏl /S2sfsskhT'|K-,,4=!zjqq%?Kb L&  եbBfd2JJJ$2MSHGt^BOU}ARFxT:#ɢr!˲d޴Y%=@3ikk"0#߯^.eYڒmۚh㾛pƆ?7c ˲vw hBLT*R*@ n4cbUW,ұ{~4>>^<@| BT%Z TͶmE"MOOF>$@@Mn)4j\x-pT\@e5p8x<z ۶p2 CXLDgt8Zhy-pj[TzpS )Ŏ3r(8l+j$C_RW;??s̎$[匌3>[b ɩLv$k/@Ȫ.lIګbT-k ڝKEk@r *%ݥ[ȩ|pChn.p[p3C^rQ.X͠7H`Q' q@\S}ݮ\ h^n&( sEA{V۴W(u5of80 U9R8lL9kIENDB`parlatype-1.5.4/help/C/figures/parlatype-icon.png0000644000175000017500000000333213171727132016663 00000000000000PNG  IHDR szzsBIT|d pHYs B(xtEXtSoftwarewww.inkscape.org<WIDATXWoSe?ڮ؛lED^c J8QĿACOD' ! Fc lknkח9†D'}s~w~< ίW8A5B~.7$B<1$MDELQUd3p0xﾄIu.eQ rkWH9ЙB5"4P0PA2Jt䤹8 |V)_ Een /Mع1i2RxΜ;脙?Z[aw:_fHM .ͼi2- VBKs`vV> _<G-5'd 0UaI.dBTG8:; 'yX&FKAaV8x0#0ִq2 &B0E/VU+:dڴ('9l]97Ai tV4QQ0<|,YiͲ3w@_uu5|pKXjg׀$w LTWZPد9*!72 /\Ьq1@<4.ыĽ7$P#p$ l@\r2MU+a;6 -&ycߟ?t&^ע Hi> (-DA:]o[v& e3R0k_YL@uVDA /0}8j߇ _LÍ_n_?ϥm:يׯ߀^X?pC e="Թ$, Tʾw7IikY" yz3<7t8'TX,V PY. = 2щvRe G]˃O׷uݺxtQnܨb$d=xvO4044000x;BEG%O.P3yC] I^0:>=uRd޺e`Z##h!g~X)QaZ $τ׆ J;A} V3IENDB`parlatype-1.5.4/help/C/figures/parlatype-prefs-controls.png0000644000175000017500000003736313176574164020740 00000000000000PNG  IHDRl@FsBIT|dtEXtSoftwaregnome-screenshot> IDATxw|ulN !!@($tDE¡bA=AA<P'D9E@9QD*vAECIHolHB3 R6㱤μ;ߙـB!B!B2) !W=TSz {yh̊",ra /^z̙+EEHWjΝ;ܹhөq:8Φ\!)Ft:^qoydh؃v`NnZͰBqj;vݻoTkEepkk{B4átرҥK'&X kjagff=yJBۮ]scٶک*U3l !E.$$ėuUojܺjXDj[Q*T!.v^^^U]5R*P1FRO/ !h& 몫CTdQ}[Z!@=l!@a|(]'2 !DPl[!DBDérjDd [!dI[!Zچ!!hii$--G}T{Ya !D#=l!P l!P Q-Y8v+3Or+90y[;]4[[}Zpbcwi0hcvE%GvV_g(3n4KsαĶocS'N79W۬:&:>-}?7Գ{c5O{ISϬ>`]N}F{2-ŨUH0Y/PXTDQQΞd9./KGy9.pQ~p_$ҟ{wQKܦTIR )Pߪn\^6M/hz:zE#G7{Vʐ9-?x"&a>}aBE#87O[z_;~:[O>fpf|:6-aU'C7!?Lcij/y;TEl|>/ǮNrl^gv.n$ەw6Բ$Kgj/a|dP}ĴmÓ&MOϗ'Mcll#:I<7v4" -ߙd%)rø{th]7٣]JH)p~*W]ǦpF=|;& {7ǽSbvsFJgu0' q42ox#d>GX8>+FtK/0,;9kY.t{C5˨` PU9w+e7s?&`'g0o 塗p~kHMY{ۖ,~=~'my:hZOuzhL^;*@kC>\qݭV fN>]2VvA| >#׆-Hևrhq]fy~?yR2:k*wj<1b](L&1>\rb FVGۊ(-Ŧ'IN\Egd_bƴi5k=2'_rީ< βTp>κJmc'zxY^YݦՖKt?,ZG^FUmjrv('w w"3)p=]uQ(8RǼgQw~gOO=``sp9HcӜo֣ms,㟹/cgYHO{ɣ*'Q兹s9v8A<h~i./~YA/Wwڛ)'zT{{ȫ$~ߛPnϭk<#L"p?`&c^ګfwӛ's'N]m'n4Ͼ}{7V7cc9JxX?(yAGmz$/ z GO{)ܼl 4&|@ϼn]PSZB9w!:J@П髷^=>g gλO>#9쵓_}9##k>W>y5t1p |9o+=,9#Zϡ4-W.KO}{<B t "KstVt?xfG!hd6%?|kԆ@Q3wϮw/`ңL.eiumhq/X =F14>3fIۯ&FJ3z։/ZexU b&8= ow~jN:|oh MDwBC'.r0wcL\x1 NDCu =06ywV,s: 32eCu`ʀGiߗ9(_}v'tiOlrp#Phe{ˣ`K9#B\d [4?9M!cwV?@Et(JC0 vBjǰ d [!_c2$"*!'B%-*!-*!-*!cBBBBBBvNNNs!u!CF#BNgWm`F4 "^,MrI` !485 ZVE7VEzB 4MC[B-,!ΝtѬ H;|6Oۨ( O%d&2Fj-'#309}o;%&: w~r$N1lKJ( .ٔ0 .E@. N=䯦*<<<࠻ lѬNpw nQ^^@[4۹% hVY.-ɐhآYɐ]r|:i |*S\ݴ.z2G91{p<is.k>{[ŮB\.䊚~HAa|9tB+z0:tգ_subZ;5M lҭ<;UvgK].!]aO5E1p`,>B8N?Hkp/BYPa+z| ynp9VX0GeaEGH?M޳"^amߖV%/C"",ZI)0F#C1ǣ # sl-mxsi辩G':eKa` he`-8.]֗6f䐍+4zõ!DH8 :[N #4(_O`ɉYcUkwv?:ӵS[Eߗ\q{^J@kB .[{H7ۉ?ӊq|CLT8w[O(KObîk)H2%å.- Ӏ2lyђ!%ohh. ^F,>;. x⇼#X+vh}oLe~U-1۹kpZKg]cWl=_ i]S||=sfJ+W߇.!8}\)0)9/**72Sa,2*!OCFBP k??ÇIJJ"!!-5\$EJII!>> 00t$H[420 (rΉ^h4^5\.4 ehv& N}VE_5MBcRqAPcX ڹ}6v]EQj#BBBBą؎l2:B4Ǎضwt(mC>YďYvu+*8uᣌ+m[֙+/\+Sˇ]Fˡa u1:-lEIduآyKGf/xb֏|8cv$̻ ,Eq~QA Dy25FUNkK[Ʉ2gO"ƿICv-K6d2] zmM޴<ї̃n$λk&>r+x1LRZgȵο#ʸg^O7$E>71uʍ=c.wϴ4y&a _m8H˗71k䥩X1's|g2i胺1)׶\-S]MH:\HlQLyh8zpY3X|!MF7Q}o`ℛ櫩n<.,X|"6rӢ5`}U~V{o艪CVtG-{NK.Ea]m^rI<6w |2_8{Oaípfn2}KLPu;΋NaLB+4I|5/0dJo|}n{spb澼.or\ic&IorQgOvՄ5"6.ze7̢gURbsXȒpZrέC=+ W3pX[gږ ϙ+-^wMe~0třؽl:&e3ߘǬ7"XD?|u 9OTW6? a|O7FoI\vUzk}cРmșS>H_Ħx)&Dp-)? p{` a`zFqtj ]Zq AWVh2ʴx>?rCϵl-9xҦkƤGl- _SF/9\hǖD2n 4_`R*W>d9o:q}ς 5VT3 v BjuP2TK(:KI9"ZѮr9N$jLp=Õ7H#ܚa}'st>x Ճ1p)DεPCm6Y>(4qs pNk7yIDATYwK>7S'ZAm In^ch,lX| (s ly)0UyY;7N5HGqx{&@HvLEg@k^(yr?Zcc_ſ~h.kmQp,<5gLKSB>V&ς艹^s:V%W YCCG#ChnI[]ra ;(O@wŭYqxŖ@£3X+ /VZ@̥؟{xum뉼 9dެ|Vb}i^H͵qoEwٖw<|h8ږCWA b/3oF9Iߚ_y[Z7Ms扯2*E-ԔA߆ki=tdQ`_9[Q4e}N+%'H +BiD]|sYfg7|D^C.rq`ť䥬p>5:Npp{233IoQc6k)9D7ߑjv#"|z"4F9,Rz2w)k]V{YZ,F<߻kY-S]p7߯]ǦG.c4qp@Лb|~fp<-wgGv՗l+h0p`ˣq z{!wDX!'sPԢ!Pm\C#ſ7zYX-ߺl[u$m)پ 3ד!<5q0Z@&Lю'quY#{^{uNU2wL5L}8 n f='b&Y1![f/; nCtKy[2`~ ӳ7a޺7o.3۾4hm34p?1LXLfEO@N{QwQݢ].W 5c*ub ƌ2Kzz:s:$pw6 WʀGiߗqh a$ESvʝBDB%˜ !.ZBPW[\<jo 5BBhVfҖ())l6hV111$&&JhPII ĸnMt:IJJ"%%2w#΁l&&&=z]4ܚ.--@}[&B%$B%$B%$B%$B%DDr:l۶TOe>*))Tt:9|0III$$$hV)))㣺v8^58Nt:I`fUVVAu1gYBPI`fg2ԷiZzzwנ7 IAa-*k^ESuEQ^{KABBBB"G{hK *ܞ%-m%2?ZŸ*,91ˮv "/gA|0.:e͸=7O\,]:woU$[I`fW*'0`&/^Eq~QA? P?]بۈmi+^ƿ,Idww4?)B}î{L+wSmiݛ"ypy0eGnCP_9Iw\Jk}wbS?,>˖ƃdZh&NgE6{#>τNL;kRB $gTF֦X$.j $(<4H=_?&ܛ70qMt؎k *9oG%ML:yi*1's|g2i胺1)pUo9zQYo+ԣBM\㱻:ۼ+uxl$2c2/eJ p‚[_e^EZ|+5DϬ~6s-[ ઀jOt]Ø4(?EOׁ|jÈ^% H-AOOO|IZ3Zּ'|ҷ~ɼG`$}-ՖĚbH\k 5ޖRR+VD?׉$Vp||9~eּ &̹8Љ%g}jpU];~M!1I|k Mt_κ[ @8WFt8qjKOrKPh %m+rU?XeVr-0P½jJD;7NMU @97+^z-Cj~z=t6[ \17f @VWy5=Zp!4-OgSuRǶ(΢@bOO P6]j>qV8N'`ik%I`7gYC Ujod+{ošu'Zli $<:nq \yW׶`In% Gy9.??"ҤA6 ^q[|̼.G{7&}k~eni)ez#5lyÇV^uZ<$g3tNukE4 l-Jɉ8Q|3X.Q]% ' YZ6=ŋ}· 2 ~:6=Bvӆ-^?s4+ilݼ<{۞דQKYʷbb7~ȿ7zYX-ߺl[u$n 0s=yZ"{SQmH,X|"Jz3'X(^$\(s$PS^kX~_ԷSj]yKn`| o1eƓ8`Xd3Li+ L~t0x\ظ%#g-]07uT\|.?ȣܥŷMxN:O[4$rrrSNE[$%%.vآYpxt:tn$-UYY~~~ }L^htvg . F#CYn$-dBSߦjW]d/4:&5 {NmcUEq{-> !JH` !JH` !JH` !JH`(`ϖ-s!Ν ߋ2mi+"-cnyo9nwwMTscV\{6F.j].:ˇsw-GnME.s7K27;N2eriS x"!JݜdZH -W=>4yI(kܽ I`&{C16_[J&<(6P-`=gmx<#+&c-dWxZ@߉Le\@tմ?kcUo9zQRzl K E(xx{QY>b{?t)~p"f~Bro 7ͷbpeKtA2-^sSH['/ǜɤȇpg/U^[G-v=8-cwuFy1Wˉ&I7,de$^:|=™y~,yz0A7נsǢgY,zX%/>nj,gic|5<;BXƆ|-;~`Y<rѰ!\DDxdD$\//[3\}El?{0nKR3PQ.!#G⫥X~m*'xqm^.z=o5{ g1kpʿ~]S7 ]q&)(.2v/Ϋ}t71<_g߿4`S Ť7e\Elk=['M`{>yWf±iaou-o $ L϶tjAj ]ZGmڑMZi'.4Dl& z >t ;ײ~` l2q͸7č s˗YPن֛i*`?<[ehx:?lÉ6^2CpǣKu%IXx{_;hg6 EI|kL䆞m mCNW峡5nx75/2g=r]uOG}ҡWXJxѮ+^u) :Īufz۞+o}Yˇ{"7Nw$/cE^D Ç3G[sٵ *L!ڷnI}CsEoDg-YjKOrKP*wgQH 1(.v@u aPiCb-I/R>gG( N#a R, (sW 8q<:>ڳj%k0xv̙on_kUn?yNj!1kPl'ƾϫ\ڄYlyj<Ϙ+S`%oO(:Z{4wQrr48ڛا l=Df~EV>Q[]}!f'OCdyjFI#9`!s\(Zҫ."ֽ+eנ2`S}M<> bzކ6~C"xsi>N8J4peW?o>ATEn`| o15c3l)ϙbv܄2`DƱ*?ƕ/] twQ[UrV&Bb ƌ2Kzz:s:$pw6 WʀGiߗ-Ů%Nw](w: xN: !IyeG}]$=l!P af1ؖP{KAB%$B%$E2͔&CII fk.آYĐ(B%%%$&&R.ZrkhVN$RRR(++sw9fbbbѣEϭB'mR!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!TB[!Z`|8gU@WD.EQ`>k&蛸x!X؀ʇS}FhWTWNT !EΩr*z59v*ƙaaZ!箪clT/jxvUAa]B!*kUvBzՅ 9a)*o>=O -bUƞzUk93jBqr>k oS=B!u_sUU!Dp!v;vTIENDB`parlatype-1.5.4/help/C/preferences.page0000644000175000017500000000470413176574164014737 00000000000000 How to customize Parlatype Gabor Karsay gabor.karsay@gmx.at Preferences

You can reach the preferences window in the Application Menu (next to Activities in the top left corner. There are three tabs: Waveform, Controls and Window.

Waveform

Resolution: The resolution of the waveform image is given in pixels per second, e.g. the default resolution of 100 means, that one second is shown with a width of 100 pixels.

Fixed vs. moving cursor: There are two modes, how to follow the cursor. On slower systems a moving cursor might be smoother.

Show time scale: Turn the time scale on or off.
Controls

Jump back on pause: Parlatype will rewind a few seconds on each pause, this way you can easier resume typing. Set this value to 0 if you don't want this behaviour.

Jump back: Configures how many seconds to skip when the Jump back button is pressed.

Jump forward: Configures how many seconds to skip when the Jump forward button is pressed.
Window

Remember size: On start-up Parlatype sets the window size to the size it had the last time.

Remember position: On start-up Parlatype can position its window where you had it when you closed Parlatype last time.

Start on top: This will put Parlatype on start-up on top of other windows. This might be useful if you are working with a maximized word processor and still want to see the Parlatype window.

Remember position and Start on top are not available on Wayland.
parlatype-1.5.4/help/C/index.page0000644000175000017500000000167513176574164013551 00000000000000 Parlatype Parlatype Gabor Karsay gabor.karsay@gmx.at Parlatype is an easy to use media player. Its main purpose is to help you transcribing speech. <media type="image" mime="image/png" src="figures/parlatype-icon.png" its:translate="no" /> Parlatype

Parlatype is an easy to use media player. Its main purpose is to help you transcribing speech.

For a quick overview have a look at . Other topics are covered below.

Help topics
parlatype-1.5.4/help/C/drag-and-drop.page0000644000175000017500000000257313176574164015057 00000000000000 Drop files, file names or timestamps on Parlatype Gabor Karsay gabor.karsay@gmx.at Drag and Drop

You can drop files, file names or timestamps on Parlatype's window.

Files: Drag and drop a file from a file manager, e.g. Files, on Parlatype and it will open that file.

File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that file. This will always work if the selection contains a full path. If you select the name only, Parlatype will look up its full path in the list of recent files and open it if it can find it in that list.

Timestamps: You can drag and drop timestamps in both directions. Select a timestamp from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will jump to that position. Or you click on Parlatype's time label and drag it to a word processor to insert it there.

 parlatype-1.5.4/help/C/media-keys.page0000644000175000017500000000335613176574164014470 00000000000000 How to control Parlatype with media keys Gabor Karsay gabor.karsay@gmx.at Media keys

Parlatype's basic functions can be controlled with so called media keys. Media keys are used system wide to control media players and they are working even if the media player is not in focus or in the background.

You can change the media keys in GNOME settings. You can use dedicated keys from a multimedia keyboard or use any other key or combination of keys.

This will affect other media players, e.g. Totem or Rhythmbox, as well.

Parlatype listens to these key strokes:

Play, Pause, Stop: Each of these keys toggles between playing and pause.

Rewind, Previous: Each of these keys will jump back the time you selected in Preferences.

Fast Forward, Next: Each of these keys will jump ahead the time you selected in Preferences.

For detailed instructions how to change keyboard shortcuts in GNOME see the official documentation.

If you are using a dedicated foot pedal, it should be possible to map the foot pedal signals to any of the keys. This is not well tested, however. Any feedback regarding foot pedals is welcome.

 parlatype-1.5.4/help/C/timestamps.page0000644000175000017500000000272713176574164014627 00000000000000 Set and go to timestamps Gabor Karsay gabor.karsay@gmx.at Timestamps

Timestamps help you to navigate in your transcription.

Timestamps look like this: #03:45.2#. You can select them with or without the number signs.
Drag and drop

If you select the timestamp in the word processor, you can drag and drop it on the Parlatype window and it will go to that position. This is also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it.

Using the clipboard

First make sure, the Parlatype window has focus. With the key sequence Ctrlc the current timestamp is copied to the clipboard. Changing to the word processor you can insert now the timestamp in your transcription.

To go to a timestamp position, copy the timestamp in the word processor to the clipboard. Once you have changed focus to Parlatype press Ctrlv.

 parlatype-1.5.4/help/C/legal.xml0000644000175000017500000000045613171727132013374 00000000000000

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International license.

 parlatype-1.5.4/help/de/0000755000175000017500000000000013204324054012040 500000000000000parlatype-1.5.4/help/de/selections.page0000644000175000017500000000257713204122226014776 00000000000000 Einen Abschnitt auswählen und wiederholen Gabor Karsay gabor.karsay@gmx.at Markierungen

Sie können einen Teil der Wellenform mit der Maus markieren. Wenn Sie das nächste Mal auf Wiedergabe drücken, wird nur die Auswahl abgespielt. Wenn Sie am Ende noch einmal auf Wiedergabe drücken, wird die Auswahl in einer Schleife einmal wiederholt.

Wenn Parlatype im Auswahl-Modus ist, können Sie die Auswahl nicht mehr verlassen, bis Sie die Auswahl wieder aufgehoben haben.

Eine Auswahl kann mit der Maus (bzw. dem Zeigergerät) mit einem Linksklick markiert werden, die Maustaste dazu gedrückt halten und den Zeiger verschieben. Wenn Sie mit der Maus links klicken und gleichzeitig Shift gedrückt halten, wird eine bestehende Auswahl bis zu diesem Punkt vergrößert.

Um eine Auswahl aufzuheben, klicken Sie mit der linken Maustaste in die Wellenform. Wenn die Wellenform den Eingabefokus hat, können Sie auch die Escape-Taste drücken.

 parlatype-1.5.4/help/de/de.po0000644000175000017500000010516213176574164012736 00000000000000# German translations for parlatype help. # Copyright (C) 2016 Gabor Karsay # This file is distributed under the same license as the parlatype package. # Gabor Karsay , 2016, 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-07-20 16:20+0200\n" "PO-Revision-Date: 2017-07-20 16:24+0200\n" "Last-Translator: Gabor Karsay \n" "Language-Team: Deutsch <>\n" "Language: de\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1)\n" "X-Generator: Gtranslator 2.91.6\n" #. Put one translator per line, in the form NAME , YEAR1, YEAR2 msgctxt "_" msgid "translator-credits" msgstr "Gabor Karsay " #. (itstool) path: info/title #: C/index.page:7 msgctxt "text" msgid "Parlatype" msgstr "Parlatype" #. (itstool) path: info/title #: C/index.page:8 msgctxt "link" msgid "Parlatype" msgstr "Parlatype" #. (itstool) path: credit/name #: C/index.page:10 C/drag-and-drop.page:8 C/first-steps.page:8 #: C/keyboard-shortcuts.page:8 C/media-keys.page:8 C/preferences.page:8 #: C/selections.page:8 C/timestamps.page:8 C/libreoffice-helpers.page:9 msgid "Gabor Karsay" msgstr "Gabor Karsay" #. (itstool) path: info/desc #. (itstool) path: page/p #: C/index.page:14 C/index.page:23 msgid "" "Parlatype is an easy to use media player. Its main purpose is to " "help you transcribing speech." msgstr "" "Parlatype ist ein einfach zu bedienender Medienspieler. Er dient " "hauptsächlich dazu, Sie beim Transkribieren von gesprochener Sprache zu " "unterstützen." #. (itstool) path: page/title #: C/index.page:18 msgid "<_:media-1/> Parlatype" msgstr "<_:media-1/> Parlatype" #. (itstool) path: page/p #: C/index.page:24 msgid "" "For a quick overview have a look at . Other " "topics are covered below." msgstr "" "Für einen schnellen Überblick gehen Sie zu . " "Andere Themen sind weiter unten behandelt." #. (itstool) path: section/title #: C/index.page:27 msgid "Help topics" msgstr "Hilfethemen" #. (itstool) path: info/desc #: C/drag-and-drop.page:6 msgid "Drop files, file names or timestamps on Parlatype" msgstr "Dateien, Dateinamen oder Zeitstempel auf Parlatype ablegen" #. (itstool) path: page/title #: C/drag-and-drop.page:14 msgid "Drag and Drop" msgstr "Ziehen und ablegen" #. (itstool) path: page/p #: C/drag-and-drop.page:16 msgid "" "You can drop files, file names or timestamps on Parlatype's " "window." msgstr "" "Sie können Dateien, Dateinamen oder Zeitstempel auf dem Parlatype-" "Fenster ablegen." #. (itstool) path: item/p #: C/drag-and-drop.page:19 msgid "" "Files: Drag and drop a file from a file manager, e.g. Files, on " "Parlatype and it will open that file." msgstr "" "Dateien: Ziehen Sie eine Datei aus einem Dateimanager, wie zum Beispiel " "Dateien, auf das Parlatype-Fenster und Parlatype wird diese Datei öffnen." #. (itstool) path: item/p #: C/drag-and-drop.page:20 msgid "" "File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that " "file. This will always work if the selection contains a full path. If you " "select the name only, Parlatype will look up its full path in the " "list of recent files and open it if it can find it in that list." msgstr "" "Dateinamen: Markieren Sie einen Dateinamen in Ihrer Textverarbeitung, wie " "zum Beispiel LibreOffice, ziehen Sie ihn ins Parlatype-" "Fenster, und die Datei wird geöffnet. Das funktioniert immer, wenn die " "Markierung einen vollständigen Dateipfad enthält. Wenn Sie nur einen " "Dateinamen markiert haben, vergleicht Parlatype diesen Namen mit " "den Einträgen in der Liste der zuletzt benützten Dateien und wenn es dort " "den vollen Pfad findet, öffnet es die Datei." #. (itstool) path: item/p #: C/drag-and-drop.page:21 msgid "" "Timestamps: You can drag and drop timestamps in both directions. Select a " "timestamp from a word processor, e.g. LibreOffice, drop the " "selected text on Parlatype and it will jump to that position. Or " "you click on Parlatype's time label and drag it to a word " "processor to insert it there." msgstr "" "Zeitstempel: Sie können Zeitstempel in beide Richtungen ziehen und ablegen. " "Markieren Sie einen Zeitstempel in Ihrer Textverarbeitung, wie zum Beispiel " "LibreOffice, ziehen Sie ihn ins Parlatype-Fenster und " "das Programm springt zur Position des Zeitstempels. Oder Sie klicken auf die " "Zeitanzeige in Parlatype und ziehen sie in die Textverarbeitung, " "um den Zeitstempel dort einzufügen." #. (itstool) path: info/desc #. (itstool) path: page/title #: C/first-steps.page:6 C/first-steps.page:14 msgid "First steps with Parlatype" msgstr "Erste Schritte mit Parlatype" #. (itstool) path: page/p #: C/first-steps.page:16 msgid "" "Parlatype is an easy to use audio player to help you transcribing " "or annotating recorded speech. You need to run a word processor, e.g. " "LibreOffice, too. Launch Parlatype and open an audio " "file by clicking on the Open button in the upper left corner." msgstr "" "Parlatype ist einfacher Audiospieler, der Ihnen hilft, " "aufgenommene Sprache zu transkribieren oder zu kommentieren. Sie brauchen " "dazu auch eine Textverarbeitung wie zum Beispiel LibreOffice. " "Starten Sie Parlatype und öffnen Sie eine Audiodatei, indem Sie " "auf den Öffnen-Knopf in der linken oberen Ecke drücken." #. (itstool) path: note/p #: C/first-steps.page:19 msgid "" "You can also drag and drop a file on Parlatype or open the " "recently used files in the Application menu." msgstr "" "Sie können auch eine Datei ins Parlatype-Fenster ziehen oder die " "Liste der zuletzt benützten Dateien im Anwendungsmenü einsehen." #. (itstool) path: page/p #: C/first-steps.page:22 msgid "" "Now in the upper left corner there is a Play button which toggles " "between play and pause. Whenever you pause, Parlatype rewinds a " "few seconds to make it easier to resume. This can be changed in the ." msgstr "" "Nun sehen Sie in der linken oberen Ecke einen Wiedergabe-Knopf, " "der zwischen Wiedergabe und Pause hin und her schaltet. Immer, wenn Sie die " "Wiedergabe unterbrechen, spult Parlatype einige Sekunden zurück, " "damit Sie besser in den Text zurückfinden. Das kann in den geändert werden." #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/first-steps.page:24 msgctxt "_" msgid "" "external ref='figures/parlatype-main-window.png' " "md5='1e21a2ddc61fda06238b6b1537191cb3'" msgstr "" "external ref='figures/parlatype-main-window.png' " "md5='4d4c5bc3942ce7586ce797ef650ca28b'" #. (itstool) path: page/p #: C/first-steps.page:26 msgid "" "The buttons Jump back and Jump forward in the lower " "left corner skip a few seconds back or ahead. The amount of time can be " "changed in the ." msgstr "" "Die Knöpfe Zurückspringen und Vorwärts springen in der " "linken unteren Ecke springen einige Sekunden zurück oder vorwärts. Wie viel, " "kann in den geändert werden." #. (itstool) path: page/p #: C/first-steps.page:28 msgid "" "The view scrolls automatically so that the cursor is always visible. You can " "scroll manually by clicking on or dragging the scroll bar or using the " "standard keybindings. Automatic scrolling is stopped then." msgstr "" "Die Anzeigeausschnitt verschiebt sich automatisch mit, sodass der Cursor " "immer sichtbar bleibt. Sie können den Ausschnitt selber verschieben, indem " "Sie auf den Schiebebalken klicken, ihn ziehen oder die " "Standardtastaturkürzel verwenden. Die Anzeige hört dann auf, automatisch zu " "scrollen." #. (itstool) path: page/p #: C/first-steps.page:30 msgid "" "To get back to the cursor's position and let the view scroll automatically " "again, click on the Go to button next to the time label. Clicking " "on the Play button also turns automatic scrolling on." msgstr "" "Um zur aktuellen Cursorposition zurückzukehren und das automatische Scrollen " "wieder zu aktivieren, klicken Sie auf den Gehe-zu-Knopf neben der " "Zeitanzeige. Wenn Sie den Wiedergabe-Knopf drücken, wird das " "automatische Scrollen auch wieder aktiviert." #. (itstool) path: page/p #: C/first-steps.page:32 msgid "" "Clicking in the view with the right mouse button will put the cursor there, " "also holding the right mouse button pressed and moving it. The left mouse " "button is for ." msgstr "" "Wenn Sie auf die Anzeige mit der rechten Maustaste klicken, wird der Cursor " "an diese Stelle gesetzt. Das gilt auch, wenn Sie die rechte Maustaste " "gedrückt halten und die Maus bewegen. Die linke Maustaste ist für ." #. (itstool) path: page/p #: C/first-steps.page:34 msgid "" "The speed scale next to the volume button in the lower " "right corner lets you adjust the speed of playback. A value of 1 means " "normal speed, everything lower (down to 0.5) is slower, everything above is " "faster." msgstr "" "Der Geschwindigkeits-Schieberegler neben dem Lautstärke-Knopf in der rechten unteren Ecke stellt die Wiedergabegeschwindigkeit " "ein. Der Wert 1 bedeutet normale Geschwindigkeit, alles darunter (bis 0,5) " "ist langsamer, alles darüber ist schneller." #. (itstool) path: info/desc #: C/keyboard-shortcuts.page:6 msgid "Standard keyboard shortcuts in Parlatype" msgstr "Standard-Tastaturkürzel in Parlatype" #. (itstool) path: page/title #: C/keyboard-shortcuts.page:14 msgid "Keyboard shortcuts" msgstr "Tastaturkürzel" #. (itstool) path: page/p #: C/keyboard-shortcuts.page:16 msgid "" "Keyboard shortcuts for Parlatype control, like Play, " "are described in . Shortcut keys for the window are " "listed below." msgstr "" "Tastaturkürzel zur Steuerung der Wiedergabe, wie etwa Wiedergabe, " "sind in beschrieben. Tastaturkürzel für das " "Parlatype-Fenster sind unten aufgelistet." #. (itstool) path: table/title #: C/keyboard-shortcuts.page:19 msgid "Standard Shortcut keys" msgstr "Standard-Tastaturkürzel" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:22 msgid "To Do This" msgstr "Um das zu erreichen …" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:23 msgid "Press This" msgstr "… drücken Sie das" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:28 msgid "Show help" msgstr "Hilfe anzeigen" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:29 msgid "F1" msgstr "F1" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:32 msgid "Open file" msgstr "Datei öffnen" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:33 msgid "Ctrlo" msgstr "Strgo" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:36 msgid "Open recent files" msgstr "Zuletzt benutzte Dateien öffnen" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:37 msgid "Ctrlr" msgstr "Strgr" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:40 msgid "Go to …" msgstr "Gehe zu …" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:41 msgid "Ctrlg" msgstr "Strgg" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:44 msgid "Copy timestamp" msgstr "Zeitstempel kopieren" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:45 msgid "Ctrlc" msgstr "Strgc" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:48 msgid "Insert timestamp" msgstr "Zeitstempel einfügen" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:49 msgid "Ctrlv" msgstr "Strgv" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:52 msgid "Zoom in" msgstr "Hineinzoomen" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:53 msgid "Ctrl+" msgstr "Strg+" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:56 msgid "Zoom out" msgstr "Herauszoomen" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:57 msgid "Ctrl-" msgstr "Strg-" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:60 msgid "Quit" msgstr "Beenden" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:61 msgid "Ctrlq" msgstr "Strgq" #. (itstool) path: p/link #: C/legal.xml:5 msgid "Creative Commons Attribution-ShareAlike 4.0 International" msgstr "" "Creative Commons Namensnennung – Weitergabe unter gleichen Bedingungen 4.0 " "International" #. (itstool) path: license/p #: C/legal.xml:4 msgid "This work is licensed under a <_:link-1/> license." msgstr "Dieses Werk ist unter <_:link-1/> lizenziert." #. (itstool) path: info/desc #: C/media-keys.page:6 msgid "How to control Parlatype with media keys" msgstr "Parlatype mit Medientasten steuern" #. (itstool) path: page/title #: C/media-keys.page:14 msgid "Media keys" msgstr "Medientasten" #. (itstool) path: page/p #: C/media-keys.page:16 msgid "" "Parlatype's basic functions can be controlled with so called " "media keys. Media keys are used system wide to control media " "players and they are working even if the media player is not in focus or in " "the background." msgstr "" "Parlatypes grundlegende Funktionen können mit den sogenannten " "Medientasten gesteuert werden. Medientasten werden systemweit " "verwendet, um Medienspieler zu steuern, und sie funktionieren selbst dann, " "wenn der Medienspieler nicht im Fokus oder im Hintergrund ist." #. (itstool) path: page/p #: C/media-keys.page:18 msgid "" "You can change the media keys in GNOME settings. You can use dedicated keys " "from a multimedia keyboard or use any other key or combination of keys." msgstr "" "Sie können die Medientasten in den Einstellungen von GNOME ändern. Sie " "können entweder dezidierte Tasten von einer Multimediatastatur verwenden " "oder eine beliebige andere Taste oder Tastenkombination zuweisen." #. (itstool) path: note/p #: C/media-keys.page:21 msgid "" "This will affect other media players, e.g. Totem or " "Rhythmbox, as well." msgstr "" "Das wirkt sich auch auf andere Medienspieler aus, wie zum Beispiel " "Totem oder Rhythmbox." #. (itstool) path: page/p #: C/media-keys.page:24 msgid "Parlatype listens to these key strokes:" msgstr "Parlatype reagiert auf diese Tastenanschläge:" #. (itstool) path: item/p #: C/media-keys.page:26 msgid "" "Play, Pause, Stop: Each of these keys " "toggles between playing and pause." msgstr "" "Wiedergabe, Wiedergabe unterbrechen, Wiedergabe " "anhalten: Jede dieser Tasten schaltet zwischen Wiedergabe und Pause um." #. (itstool) path: item/p #: C/media-keys.page:27 msgid "" "Rewind, Previous: Each of these keys will jump back " "the time you selected in Preferences." msgstr "" "Zurückspulen, Vorheriger Titel: Jede dieser Tasten " "wird um so viele Sekunden zurückspringen, wie Sie in den Einstellungen " "eingestellt haben." #. (itstool) path: item/p #: C/media-keys.page:28 msgid "" "Fast Forward, Next: Each of these keys will jump ahead " "the time you selected in Preferences." msgstr "" "Vorspulen, Nächster Titel: Jede dieser Tasten wird so " "viele Sekunden vorwärtsspringen, wie Sie in den Einstellungen eingestellt " "haben." #. (itstool) path: note/p #: C/media-keys.page:32 msgid "" "For detailed instructions how to change keyboard shortcuts in GNOME see the " "official " "documentation." msgstr "" "Für eine genaue Anleitung, wie Sie die Tastenkürzel in GNOME ändern können, " "sehen Sie bitte in der offiziellen Dokumentation nach." #. (itstool) path: page/p #: C/media-keys.page:35 msgid "" "If you are using a dedicated foot pedal, it should be possible to map the " "foot pedal signals to any of the keys. This is not well tested, however. Any " "feedback regarding foot pedals is welcome." msgstr "" "Wenn Sie ein Fußpedal für die Transkription verwenden, müsste es möglich " "sein, die Fußpedalsignale den entsprechenden Tasten zuzuweisen. Das ist aber " "noch nicht ausgiebig getestet worden. Rückmeldungen dazu sind willkommen." #. (itstool) path: info/desc #: C/preferences.page:6 msgid "How to customize Parlatype" msgstr "Wie Sie Parlatype anpassen können" #. (itstool) path: page/title #: C/preferences.page:14 msgid "Preferences" msgstr "Einstellungen" #. (itstool) path: page/p #: C/preferences.page:16 msgid "" "You can reach the preferences window in the Application Menu (next to " "Activities in the top left corner. There are three tabs: " "Waveform, Controls and Window." msgstr "" "Sie können das Einstellungsfenster über das Anwendungsmenü (neben den " "Aktivitäten in der linken oberen Ecke) erreichen. Es gibt drei " "Reiter: Wellenform, Steuerung und Fenster." #. (itstool) path: section/title #: C/preferences.page:19 msgid "Waveform" msgstr "Wellenform" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:21 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-waveform.png' " "md5='e9d05960162dcdddab10378e21ce63da'" msgstr "übersetzt" #. (itstool) path: item/p #: C/preferences.page:24 msgid "" "Resolution: The resolution of the waveform image is given in pixels per " "second, e.g. the default resolution of 100 means, that one second is shown " "with a width of 100 pixels." msgstr "" "Auflösung: Die Auflösung der Wellenform wird in Pixel pro Sekunde angegeben. " "Der Vorgabewert 100 bedeutet zum Beispiel, dass eine Sekunde mit einer Länge " "von 100 Pixeln dargestellt wird." #. (itstool) path: item/p #: C/preferences.page:25 msgid "" "Fixed vs. moving cursor: There are two modes, how to follow the cursor. On " "slower systems a moving cursor might be smoother." msgstr "" "Fixierter/bewegter Cursor: Es gibt zwei Arten, wie der Cursor im Blickfeld " "bleibt. Auf langsameren Systemen ist die Wiedergabe mit einem bewegten " "Cursor vermutlich flüssiger." #. (itstool) path: item/p #: C/preferences.page:26 msgid "Show time scale: Turn the time scale on or off." msgstr "Zeitskala anzeigen: Schaltet die Zeitskala an oder aus." #. (itstool) path: section/title #: C/preferences.page:31 msgid "Controls" msgstr "Steuerung" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:33 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-controls.png' " "md5='0b50614222d881110b176c2e28b7d18c'" msgstr "übersetzt" #. (itstool) path: item/p #: C/preferences.page:36 msgid "" "Jump back on pause: Parlatype will rewind a few seconds on each " "pause, this way you can easier resume typing. Set this value to 0 if you " "don't want this behaviour." msgstr "" "Bei Pause zurückspulen: Parlatype spult bei jeder " "Wiedergabeunterbrechung einige Sekunden zurück, auf diese Weise können Sie " "Ihre Arbeit leichter wiederaufnehmen. Setzen Sie diesen Wert auf 0, wenn Sie " "dieses Verhalten nicht wünschen." #. (itstool) path: item/p #: C/preferences.page:37 msgid "" "Jump back: Configures how many seconds to skip when the Jump back " "button is pressed." msgstr "" "Zurückspringen: Legt fest, wie viele Sekunden übersprungen werden sollen, " "wenn der Zurückspringen-Knopf gedrückt wird." #. (itstool) path: item/p #: C/preferences.page:38 msgid "" "Jump forward: Configures how many seconds to skip when the Jump " "forward button is pressed." msgstr "" "Vorwärts springen: Legt fest, wie viele Sekunden übersprungen werden, wenn " "der Vorwärts springen-Knopf gedrückt wird." #. (itstool) path: section/title #: C/preferences.page:43 msgid "Window" msgstr "Fenster" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:45 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-window.png' " "md5='6affc475c74223fa48e7de25393fe7de'" msgstr "übersetzt" #. (itstool) path: item/p #: C/preferences.page:48 msgid "" "Remember size: On start-up Parlatype sets the window size to the " "size it had the last time." msgstr "" "Größe des Fensters merken: Beim Starten stellt Parlatype die " "Fenstergröße so ein, wie sie beim letzten Mal war." #. (itstool) path: item/p #: C/preferences.page:49 msgid "" "Remember position: On start-up Parlatype can position its window " "where you had it when you closed Parlatype last time." msgstr "" "Position des Fensters merken: Beim Starten kann Parlatype das " "Fenster dort positionieren, wo es sich befand, als Sie Parlatype " "das letzte Mal geschlossen haben." #. (itstool) path: item/p #: C/preferences.page:50 msgid "" "Start on top: This will put Parlatype on start-up on top of other " "windows. This might be useful if you are working with a maximized word " "processor and still want to see the Parlatype window." msgstr "" "»Immer im Vordergrund« starten: Dadurch wird Parlatype beim " "Starten über andere Fenster in den Vordergrund gelegt. Das kann nützlich " "sein, wenn Sie mit einer maximierten Textverarbeitung arbeiten und trotzdem " "das Parlatype-Fenster sehen wollen." #. (itstool) path: note/p #: C/preferences.page:54 msgid "" "Remember position and Start on top are not available " "on Wayland." msgstr "" "Position des Fensters merken und »Immer im Vordergrund« " "starten sind unter Wayland nicht verfügbar." #. (itstool) path: info/desc #: C/selections.page:6 msgid "How to play and repeat a selection" msgstr "Einen Abschnitt auswählen und wiederholen" #. (itstool) path: page/title #: C/selections.page:14 msgid "Selections" msgstr "Markierungen" #. (itstool) path: page/p #: C/selections.page:16 msgid "" "You can select a piece of the waveform with the mouse. Next time you press " "Play, it will play the selection only. When it is finished and " "you press Play again, it will loop the selection once." msgstr "" "Sie können einen Teil der Wellenform mit der Maus markieren. Wenn Sie das " "nächste Mal auf Wiedergabe drücken, wird nur die Auswahl " "abgespielt. Wenn Sie am Ende noch einmal auf Wiedergabe drücken, " "wird die Auswahl in einer Schleife einmal wiederholt." #. (itstool) path: note/p #: C/selections.page:18 msgid "" "When in selection mode, you can not exit the selection anymore until you " "deselect it." msgstr "" "Wenn Parlatype im Auswahl-Modus ist, können Sie die Auswahl nicht " "mehr verlassen, bis Sie die Auswahl wieder aufgehoben haben." #. (itstool) path: page/p #: C/selections.page:20 msgid "" "Selections can be made with the mouse (or pointer device) with a left click, " "holding the mouse button and dragging the pointer. If you click with " "Shift key pressed, an already existing selection will be enlarged " "to that point." msgstr "" "Eine Auswahl kann mit der Maus (bzw. dem Zeigergerät) mit einem Linksklick " "markiert werden, die Maustaste dazu gedrückt halten und den Zeiger " "verschieben. Wenn Sie mit der Maus links klicken und gleichzeitig " "Shift gedrückt halten, wird eine bestehende Auswahl bis zu diesem " "Punkt vergrößert." #. (itstool) path: page/p #: C/selections.page:22 msgid "" "To deselect click once with the left button into the waveform. If the " "waveform has keyboard focus, you can press Escape." msgstr "" "Um eine Auswahl aufzuheben, klicken Sie mit der linken Maustaste in die " "Wellenform. Wenn die Wellenform den Eingabefokus hat, können Sie auch die " "Escape-Taste drücken." #. (itstool) path: info/desc #: C/timestamps.page:6 msgid "Set and go to timestamps" msgstr "Zeitstempel setzen und hinspringen" #. (itstool) path: page/title #: C/timestamps.page:14 msgid "Timestamps" msgstr "Zeitstempel" #. (itstool) path: page/p #: C/timestamps.page:16 msgid "Timestamps help you to navigate in your transcription." msgstr "Zeitstempel helfen Ihnen beim Navigieren in Ihrer Transkription." #. (itstool) path: note/p #: C/timestamps.page:19 msgid "" "Timestamps look like this: #03:45.2#. You can select them with or without " "the number signs." msgstr "" "Zeitstempel sehen so aus: #03:45.2#. Sie können Sie mit oder ohne die " "Rautezeichen markieren." #. (itstool) path: section/title #: C/timestamps.page:23 msgid "Drag and drop" msgstr "Ziehen und ablegen" #. (itstool) path: section/p #: C/timestamps.page:25 msgid "" "If you select the timestamp in the word processor, you can drag and drop it " "on the Parlatype window and it will go to that position. This is " "also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it." msgstr "" "Wenn Sie einen Zeitstempel in Ihrer Textverarbeitung markieren, können Sie " "ihn mit der Maus ins Parlatype-Fenster hinüberziehen und das " "Programm wird zu dieser Position springen. Das ist auch andersrum möglich: " "Ziehen Sie die Zeitanzeige aus dem Parlatype-Fenster in die " "Textverarbeitung, um den Zeitstempel dort einzufügen." #. (itstool) path: section/title #: C/timestamps.page:29 msgid "Using the clipboard" msgstr "Mithilfe der Zwischenablage" #. (itstool) path: section/p #: C/timestamps.page:31 msgid "" "First make sure, the Parlatype window has focus. With the key " "sequence Ctrlc the current timestamp " "is copied to the clipboard. Changing to the word processor you can insert " "now the timestamp in your transcription." msgstr "" "Stellen Sie zuerst sicher, dass das Parlatype-Fenster den " "Eingabefokus hat. Mit der Tastenkombination Ctrlc können Sie den aktuellen Zeitstempel in die Zwischenablage " "kopieren. Wenn Sie nun zu Ihrer Textverarbeitung wechseln, können Sie den " "Zeitstempel aus der Zwischenablage einfügen." #. (itstool) path: section/p #: C/timestamps.page:32 msgid "" "To go to a timestamp position, copy the timestamp in the word processor to " "the clipboard. Once you have changed focus to Parlatype press " "Ctrlv." msgstr "" "Um zur Zeitstempel-Position zu springen, kopieren Sie den Zeitstempel in " "Ihrer Textverarbeitung in die Zwischenablage. Sobald Sie den Eingabefokus zu " "Parlatype gewechselt haben, drücken Sie Strgv." #. (itstool) path: info/desc #: C/libreoffice-helpers.page:7 msgid "Use Parlatype with LibreOffice" msgstr "Parlatype in LibreOffice verwenden" #. (itstool) path: page/title #. (itstool) path: table/title #: C/libreoffice-helpers.page:15 C/libreoffice-helpers.page:30 msgid "LibreOffice Helpers" msgstr "LibreOffice-Helfer" #. (itstool) path: page/p #: C/libreoffice-helpers.page:17 msgid "" "LibreOffice Helpers let you control Parlatype from " "LibreOffice. For example, you can jump easily to timestamps." msgstr "" "Mit den LibreOffice-Helfern können Sie Parlatype direkt in " "LibreOffice steuern. Sie können damit zum Beispiel zu " "Zeitstempeln springen." #. (itstool) path: page/p #: C/libreoffice-helpers.page:19 msgid "" "To use them, you have to assign keyboard shortcuts in LibreOffice " "itself. To do this, open LibreOffice, go to menu Tools " "and select Customize." msgstr "" "Um sie zu nutzen, müssen Sie ihnen zuerst Tastenkombinationen in " "LibreOffice zuweisen. Dazu öffnen Sie LibreOffice, " "gehen Sie ins Menü Extras und wählen Sie Anpassen." #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/libreoffice-helpers.page:21 msgctxt "_" msgid "" "external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" msgstr "übersetzt" #. (itstool) path: page/p #: C/libreoffice-helpers.page:23 msgid "" "Go to tab Keyboard. In the lower part, Functions, " "there is a list called Category. At the end of that list you'll " "find the entry LibreOffice Macros. There is a subcategory " "share which has a subcategory Parlatype. After " "selecting Parlatype there will be a list of functions in the " "Functions list. Choose the function you'd like to use, select " "from the list Shortcut keys above a shortcut and click on the " "button Modify." msgstr "" "Wählen Sie den den Reiter Tastatur. Im unteren Teil, " "Funktionen, ist eine Liste namens Bereich. Am Ende " "dieser Liste finden Sie den Eintrag LibreOffice Macros. Dort gibt " "es eine Unterkategorie share, die wiederum eine Unterkategorie " "Parlatype enthält. Wenn Sie Parlatype auswählen, sehen " "Sie im Fenster Funktion eine Liste der Parlatype-Makros. Wählen " "Sie die Funktion, die Sie benützen möchten, suchen Sie sich dafür aus der " "Liste Tastenkombinationen darüber eine Tastenkombination aus und " "klicken Sie auf Ändern." #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/libreoffice-helpers.page:25 msgctxt "_" msgid "" "external ref='figures/lo-customize.png' " "md5='081564921275129bee7bbd10220547e7'" msgstr "" "external ref='figures/lo-customize.png' " "md5='081564921275129bee7bbd10220547e7'" #. (itstool) path: page/p #: C/libreoffice-helpers.page:27 msgid "You can select any of these functions:" msgstr "Sie können aus diesen Funktionen wählen:" #. (itstool) path: td/p #: C/libreoffice-helpers.page:33 msgid "Helper's name" msgstr "Name" #. (itstool) path: td/p #: C/libreoffice-helpers.page:34 msgid "What it does" msgstr "Was das Makro macht" #. (itstool) path: td/p #: C/libreoffice-helpers.page:40 msgid "" "Toggles between play and pause. Depending on your preferences set in " "Parlatype it will rewind a few seconds on pause." msgstr "" "Schaltet zwischen Wiedergabe und Pause hin und her. Abhängig von Ihren " "Einstellungen in Parlatype, wird bei Pause einige Sekunden " "zurückgespult." #. (itstool) path: td/p #: C/libreoffice-helpers.page:44 msgid "" "Jumps back a few seconds, depending on the preferences you set in " "Parlatype." msgstr "" "Springt einige Sekunden zurück, abhängig von Ihren Einstellungen in " "Parlatype." #. (itstool) path: td/p #: C/libreoffice-helpers.page:48 msgid "" "Jumps forward a few seconds, depending on the preferences you set in " "Parlatype." msgstr "" "Springt einige Sekunden vor, abhängig von Ihren Einstellungen in " "Parlatype." #. (itstool) path: td/p #: C/libreoffice-helpers.page:52 msgid "" "Inserts the current timestamp at the cursor's position. It does not " "overwrite any selection." msgstr "" "Fügt den aktuellen Zeitstempel an der Cursorposition ein. Markierungen " "werden nicht überschrieben." #. (itstool) path: td/p #: C/libreoffice-helpers.page:56 msgid "The same as above, but on a new line." msgstr "Wie oben, aber auf einer neuen Zeile." #. (itstool) path: td/p #: C/libreoffice-helpers.page:60 msgid "" "If the cursor is set on a timestamp, it will jump to that position. The " "cursor has to be somewhere between the two number signs (#). Don't select " "the timestamp, just put the cursor inside." msgstr "" "Wenn der Cursor auf einem Zeitstempel gesetzt ist, springt Parlatype an diese Position. Der Cursor muss dazu irgendwo zwischen den beiden " "Rautezeichen (#) sein. Markieren Sie nicht den Zeitstempel, sondern setzen " "Sie den Cursor hinein." #. (itstool) path: td/p #: C/libreoffice-helpers.page:64 msgid "Increases playback speed." msgstr "Erhöht die Wiedergabegeschwindigkeit." #. (itstool) path: td/p #: C/libreoffice-helpers.page:68 msgid "Decreases playback speed." msgstr "Verringert die Wiedergabegeschwindigkeit." #~ msgid "" #~ "The easiest way to use them in LibreOffice are " #~ "Parlatype's own ." #~ msgstr "" #~ "Die einfachste Möglichkeit, sie in LibreOffice zu nützen, sind " #~ "Parlatypes eigene ." parlatype-1.5.4/help/de/first-steps.page0000644000175000017500000000525713204122226015107 00000000000000 Erste Schritte mit Parlatype Gabor Karsay gabor.karsay@gmx.at Erste Schritte mit Parlatype

Parlatype ist einfacher Audiospieler, der Ihnen hilft, aufgenommene Sprache zu transkribieren oder zu kommentieren. Sie brauchen dazu auch eine Textverarbeitung wie zum Beispiel LibreOffice. Starten Sie Parlatype und öffnen Sie eine Audiodatei, indem Sie auf den Öffnen-Knopf in der linken oberen Ecke drücken.

Sie können auch eine Datei ins Parlatype-Fenster ziehen oder die Liste der zuletzt benützten Dateien im Anwendungsmenü einsehen.

Nun sehen Sie in der linken oberen Ecke einen Wiedergabe-Knopf, der zwischen Wiedergabe und Pause hin und her schaltet. Immer, wenn Sie die Wiedergabe unterbrechen, spult Parlatype einige Sekunden zurück, damit Sie besser in den Text zurückfinden. Das kann in den geändert werden.

Die Knöpfe Zurückspringen und Vorwärts springen in der linken unteren Ecke springen einige Sekunden zurück oder vorwärts. Wie viel, kann in den geändert werden.

Die Anzeigeausschnitt verschiebt sich automatisch mit, sodass der Cursor immer sichtbar bleibt. Sie können den Ausschnitt selber verschieben, indem Sie auf den Schiebebalken klicken, ihn ziehen oder die Standardtastaturkürzel verwenden. Die Anzeige hört dann auf, automatisch zu scrollen.

Um zur aktuellen Cursorposition zurückzukehren und das automatische Scrollen wieder zu aktivieren, klicken Sie auf den Gehe-zu-Knopf neben der Zeitanzeige. Wenn Sie den Wiedergabe-Knopf drücken, wird das automatische Scrollen auch wieder aktiviert.

Wenn Sie auf die Anzeige mit der rechten Maustaste klicken, wird der Cursor an diese Stelle gesetzt. Das gilt auch, wenn Sie die rechte Maustaste gedrückt halten und die Maus bewegen. Die linke Maustaste ist für .

Der Geschwindigkeits-Schieberegler neben dem Lautstärke-Knopf in der rechten unteren Ecke stellt die Wiedergabegeschwindigkeit ein. Der Wert 1 bedeutet normale Geschwindigkeit, alles darunter (bis 0,5) ist langsamer, alles darüber ist schneller.

 parlatype-1.5.4/help/de/keyboard-shortcuts.page0000644000175000017500000000422013204122226016445 00000000000000 Standard-Tastaturkürzel in Parlatype Gabor Karsay gabor.karsay@gmx.at Tastaturkürzel

Tastaturkürzel zur Steuerung der Wiedergabe, wie etwa Wiedergabe, sind in beschrieben. Tastaturkürzel für das Parlatype-Fenster sind unten aufgelistet.

Standard-Tastaturkürzel

Um das zu erreichen …

… drücken Sie das

Hilfe anzeigen

F1

Datei öffnen

Strgo

Zuletzt benutzte Dateien öffnen

Strgr

Gehe zu …

Strgg

Zeitstempel kopieren

Strgc

Zeitstempel einfügen

Strgv

Hineinzoomen

Strg+

Herauszoomen

Strg-

Beenden

Strgq
parlatype-1.5.4/help/de/libreoffice-helpers.page0000644000175000017500000000710713204122226016531 00000000000000 Parlatype in LibreOffice verwenden Gabor Karsay gabor.karsay@gmx.at LibreOffice-Helfer

Mit den LibreOffice-Helfern können Sie Parlatype direkt in LibreOffice steuern. Sie können damit zum Beispiel zu Zeitstempeln springen.

Um sie zu nutzen, müssen Sie ihnen zuerst Tastenkombinationen in LibreOffice zuweisen. Dazu öffnen Sie LibreOffice, gehen Sie ins Menü Extras und wählen Sie Anpassen.

Wählen Sie den den Reiter Tastatur. Im unteren Teil, Funktionen, ist eine Liste namens Bereich. Am Ende dieser Liste finden Sie den Eintrag LibreOffice Macros. Dort gibt es eine Unterkategorie share, die wiederum eine Unterkategorie Parlatype enthält. Wenn Sie Parlatype auswählen, sehen Sie im Fenster Funktion eine Liste der Parlatype-Makros. Wählen Sie die Funktion, die Sie benützen möchten, suchen Sie sich dafür aus der Liste Tastenkombinationen darüber eine Tastenkombination aus und klicken Sie auf Ändern.

Sie können aus diesen Funktionen wählen:

LibreOffice-Helfer

Name

Was das Makro macht

PlayPause

Schaltet zwischen Wiedergabe und Pause hin und her. Abhängig von Ihren Einstellungen in Parlatype, wird bei Pause einige Sekunden zurückgespult.

JumpBack

Springt einige Sekunden zurück, abhängig von Ihren Einstellungen in Parlatype.

JumpForward

Springt einige Sekunden vor, abhängig von Ihren Einstellungen in Parlatype.

InsertTimestamp

Fügt den aktuellen Zeitstempel an der Cursorposition ein. Markierungen werden nicht überschrieben.

InsertTimestampOnNewLine

Wie oben, aber auf einer neuen Zeile.

GotoTimestamp

Wenn der Cursor auf einem Zeitstempel gesetzt ist, springt Parlatype an diese Position. Der Cursor muss dazu irgendwo zwischen den beiden Rautezeichen (#) sein. Markieren Sie nicht den Zeitstempel, sondern setzen Sie den Cursor hinein.

IncreaseSpeed

Erhöht die Wiedergabegeschwindigkeit.

DecreaseSpeed

Verringert die Wiedergabegeschwindigkeit.
parlatype-1.5.4/help/de/figures/0000755000175000017500000000000013204324054013504 500000000000000parlatype-1.5.4/help/de/figures/parlatype-prefs-window.png0000644000175000017500000003776413176574164020617 00000000000000PNG  IHDR@/ sBIT|dtEXtSoftwaregnome-screenshot> IDATxwxlI/NRh!)*ZS@ &U(*)i;!n$&@`'ٙ9g̞̜B!B!Bq1Rj9B!?O@?~ɏt"}B4b٬yyyy睥wAȠwX e۶mjժ9NN\!( :ܵkΞ={dTWm۶;KJJ*!/^nݺe]6XMi~?Tʂ@j!>`ۥB PZl5o޼'`t+P@zzMBxwuVJl~)4dp1{j*£"##)=/?/_~H(JعB (K> ׄ\W3nBq|)SB 7gvU!yQzr+{(n !ąO_C4p=!;t:W*ty Hw _^#r .+ bWL$ !xU{S@e @!.~r % %Аaݽ~ߐWﱻRLqGmf\poמ_k~-8s[Nv{x]۬V^m-y$fWR{dwK ~m!Nט/x2BC4I<hN}HK;CTݫؾ땽蟲/We/r4un7>w._%^#: -x`f~1{| AWC_)ypy̽7?jZ ^='ǭЊt"ʲ恚Z5_mRq\wL"׮m‹؟Wc,. R~%ޗnQۆ[]?挆&yM Q7mݚFvгmUO?("4Û0ͤQIg;Ѷt:AxOt~HV ï|7" 8IvHCSFlf !-ʧ(n_Gpu7]pBʄF1w$zkKr6/#S+%9̄ J`]2J뗳M*J:lчƗ!a@Ivy]<Zgv~m()9}-\/cUrc_,y)[kMgu;_3CssXʦ ƿ$///`_o I+qѓ1k@Cr/agZz-/JV|FnTQ}cOZҷǰm#W=Ĉhs5dyGq;'U+T72֩R9TSD.λl+_Unʻi˯wwv}3+8l4A;6E.e0TZGׄVن\Z΢Wsm7-,%;׸Ƚ[';#_`[8+Ɍ)i} ࢧ#u̿rb|?W;W*t^cCQH}c j?kE()¢R0a$doF י*_EK1cni3ۃy|&M"/q}il:7"y Q6ecy}$$ \굧?o8N/ "/UIY[!)>Ϙ;0ùG2c/c4k>ɸI|N2,e>*;{+hDG)_ntRuw̬qY^3> G:wccJ"o'%ŀuMQ7|ŒiLaf;m;|Ŏ'yeTK)_RA"鶖U.K=/9coT\md" d( Ls^W' TWJ{W&}:]D}92=S0p; EkxWٟyrHGQŀEEcΦTobb n#(_b)[r5*4s|#caQO齗yG%FX+'_^௸I40^4 &E+:Џ[ˠY`>\r*.V D]߿=%cyyy2 0v @BdX!4JB$B$Bd @!4JB$B$B$BdX!4edeez!8\uu=Bc. !!NBt:k4Fӝ+B4|J!;t:z^. !?TB\t:]C@B$|ry H!Φܼ<>BB|y$!‚:??Qt̬l(.6{yI bcq8ni@PPnf\]7%Agʼn"tǙf^^|UUk׮P E$8O(;???wQ#Bs|WᬲZ 5" 8Z4ovpVmrP#Bs.==|W-504@o94ڝ䠲Rs[TQrMwǰGT;ndϛI{$^= g7 FҺc ^rWUv qOX9 ^G49|K]&.x+,v1a,ّ7\^Rݩ>s b$$:ṟ2Pm~iđI#`= J0(.;62̮t;FS4M (R8):u;sqo"IIq8W%Ww$l+֛&mS+y5 Xxe< \桤ٽwmRZyfagQ C"AD&U /{٥[PvFr),AA| 3WFB4:iXLM'21 o= z%=r z=g ҙDM3YPvZrf 1v dB-$-;9i$Sdl೅tl1.F1OL`fwz mGe:nYʼa|@":S`'7q&05(sGj\Ǜ陵ׅs a+>D6g>p, 4 oDqRx<+^D5v^$%< oC'ǫ<$Fc/dÜѴMS $$6icvQrHN"ί]᰹²DF dIBt LOb"6:gQ{D CQdƚ_WMl?A]6oCR gl}ȩbƺm.'Ijr Zn31'=M\'yߜvr]ӯ-t*;FV1ك-rnf>c6%o/eCN,Wy?'`J䶁}i <c@  D'_UiL0|<+i tFDfJT7D@N^E6#V#.PdSҪ#k:ʉ$'6mRgɑ|,j3""ڻl/1ܟ`ڴO!WA&R0:liih[JBHiךH}j֟PoL䥧r4-,fqx(ɝړUվP6s>䰒0;^u6!p䀥ny|MI?\hS<3}Ivở؍wX>y |n=XOYȲCވXI׆{\u-]VK(m]QvIޚy5Mb2챶:h> C"8;Ć(*~p ,t &P)1;V]3Pu_c+8^zN1@j3mN+k}Y\XQӔqZ9 {sع8ї< uUqr1ozs} @#p<˽ * W?FQCp81s~Z2܏$ct jYf%Z&h{.p#GRD(D^q`w1|i_v` W8w_(xbڭ7^Ur6j/& x}{BʂSMPh ^PUVQOn NJ;D(- ?#s#dzQȠzEș׭lhqC޺[YR>Z 3"RrǩcSe:rj!5"- HLcdXCQ O$ڰ;6K7,|ciNѕmYw#בA42Vu]}MLޙǎM;)$s?l !RNԻ.FjI6;  :lEZ& {N |6En_`,s*۷peKUUMdF7q`f|l9d\DK@gfMgi}%B0+wE[-;3-SH341~Ftzo"|6-_(͚/Q:ЬiS:Ѷk{tŵ;h.Ηf!#ˇhbAA%:Yq}y8 u/Ih݌G:~b_!&e}}:W)xEpy[ov?}.js.=OL7ՇxR  ;YŠ0DҢ#<|}4JdoٸGC=~e^G @Ϟ6pA oЇm5Z zag$i#XX9t;YZSK@&$;ٻ7Wi"ߋb> y,q$5 $1\օ7srrwΪ*ԈѠ YH4L)lش-[q8thw [m줤6Sؽgomr\"Rd @!4J@!4J@!4J5ɷ.@?;NB\l޼\Cu=Ь?,m҄BmB!\BBBBBBBBBBBBBBBBBBBBBBBBBBB2xzܹTNg)B\\4jBGlٲnݺv|F*X`uNeCx?9jd{ hڵN:nw; mNZSY|zX1К+onbƢ5 =Κǣzޤt?-zE+p(OO%ǹQU ?y\v(EkU6W}>u3w^B4  #GеkWl6i'Osyx`tAy Gvk༮y[ЋGp|Whu_37F$x"YIӸ/T`)_AeO&!= !<ǣݛnUUe|kBCB햛i$lbُӡgkC]b0(?èk#\o|.2J0@3RsU!(woTUei,v9&ӧij=e\Խh C_DAl\4Lx;,Y|C$IW'n")@ Çf~zI/x߉})hՒT~3+j "k?&QGu[#mM-FL=PNr| u-h CeQ{;s#s#y ]5u s8GoF^{=5?FO_SCXR7L]/|ox,̶w1~G7{Z7xyz<܍32C#^IX{W0k_xo|d$sb(Lcߞ\烁/tlzIDAT~s&vw_wYIVPxq Qv-yS>iVXu]M`܅<Dzװ\l_Quvg/=i ?ۇ2jֳWMfwYs,W:'{gyIؾGJLg:lGr q3???f3~=:EjǕ?ĬiSnTgIV CYH˧gھ)<ґѥΜnُ^@ ?rwE(qe)Ʀr2Ԃ,IGs;ke~꛿OV;qRJA&{wǨ8(. 'Qq-i3~5;!N}ЫlPb{?x4m* v0u8̲O̩jV] jLM>Q'𩊣0|%n27%5:B"zCL|w}>}^ࡎ&8nNgsiKoj$x&`w<]hO^dBOh><8^q}T\.'*uKˬK9WWEũֽ>dm]>=ao P3ĄN#03}$""())t,vƘ9_)wu>0`r؟mS顗-s}x7yWÖ_ pI xM'V3lы_ţ;BAźר"wKpWP Vֹ;F>7_^BIS<ЦB4 geDESR@ta]WL39Oz@FG^:={Gf`ԽsQiuLԉJ:2१gG!OA_9shPf:LirOoKxVԅrq ~w6K^}i^'T6rٶ|.?Ƣ0%vR#a7e]uS]X7 -0vj_r꥞mׇ Y,SnZ P:l6ZR\@^UUIMMl6ӳgϺ)EQŀQTy1`@rr2֭fpF=f"瀞8<Gk׮l6N>O??v3xE4KY='Θΐ,ޑd_g=^~c4myj]/rٶB£#UU<}_.Аnf6I~`LN+,V<^KG:ԧ3Q 5{qY4Jmy.l[!yA`Q{2q4}SٴqcRvԲ{;3YjYj-.ϐl]߳`%$wPr΀/{fTॾ\3c^It%j*Z{wYG\+ƈHhryj=ʯfM)(ohږ_s0wVRA$v!wfW[u.wݶ|ݗy"ubͤd#hw ׹h C1ŗ]glD޷*A3}%S6\T(IyvjRFNapgJTP~p͍7p7gPUIӦ+03k"#k`Ɖ,MިBWbI>35S_ݜ~LX8de/"'+W o dNX iۓ^ o;>H7*L䦬YIVPxq Qv-yS>iUiݜ<1;:2řt5wl3xghΏ|r7jn'Y|pz:9-fݚV]*۶&eȊ7c 'D#Fbř]&N Y^'/ѿ<ل3[Ѧg/BxY;l6wߣStX~\3AAA̚6F5/$/_x/_QѴ%fہh/GP/ O맿`]^wnPEVt5"EٲkXrμ˺0ѩOz Gy%hgF>Ym!K)=mܚ0CiY>EX#̍wv?ҍK[7WP0ը˨~ݚն.5-SL.i]Z3z:71JE psOQ{J҇8gjN)=@pRG {s={M%rN/`6Y|9u2Xj+phGa:y"+k(tKkT,^Ƞ~ ܇5>v]Yx9bƀWcdbF{t?wN;,*BknՌ+*[R2RiU|AQquO)Y[׳OimCO~ۦB-g 1!3tf3L2JJJp:jws}`j6{l\k*=de `ux^]i;JZۺ)wuqնu)ӓ60q1 P?i qx @QN'zՊn'6&J[\\|rzoooN':rHgsoz"hu@&D\-ˏL]yhäx>n<|7vK[2`$ּ=+cYL+"<)Рͣ(?evD&dpTn妬p7nmj_r꥞mׇ Y,SnZ q:6ZR\@^UUIMMl6ӳgϺ)EQŀQTy1`@rr2֭fpF=]i@]Wni,W{Q2}. )|L}wS/g¥hWe-dVUg|Nʘ_ř|hF': OSUmԧ.mFllK{y{ɰ3P)0yGz}l}ΦUǨ8(. 'E;zܓxjUW%%-ѷ7͜isj}kմx^QM0_l6l0sd"#"Z~WR9# M3楝HUӊ7]>gUn9gKˬ@ hM.>&f>ўGa:y"Ԡ1)2 V#%u#ץyIwq}du=f)Fo 8Qq mp]O='օi*K/dPvÃx<_(Z8ۇhs-wv•6 :|fsODTD%%NU~Wsۤq|6 xxyM}13w/E[QHr^7ws :)VٛeZSik>@D>`q+יμUvLcQ 79K :XmuܭךG\c//336Z~#X--zkxp??cGXY8VޥuǼ8w.{-tnL@ɟ<\y9 s26d)..ql Ǎ%qc6i"QX,cRS'NN<;c4&a~/qхu_3Y$>]i;JVUWi7w+sKn]vՙ:qw3Kg+֜|2,曆. ݝjtܰck3eדХoMӿqNc7ݎo ɔKcTnmn=@տ1 sL}zǙe+Yv9l'g q{rSP(ΣH5k˖K,wnTQN'zՊn'6&J[\|foooN':]u9/&Wq-[zʵ(?evD&dpz|BA :={Gg'GA+2yPwRBr8;%>b/“R *ezqf1O1B\#(rU^^M4ǿc nL붱EkЦɔ~ч\oEՖ˶sqw6Հ)+~Kn<|7vK[2`$&dˏDFnZ?sz篸W!WoW ?ktPy(:#BN׫ĕB0~?EڏHIENDB`parlatype-1.5.4/help/de/figures/lo-menu.png0000644000175000017500000016613613171727132015532 00000000000000PNG  IHDRbq7.bKGD pHYs  tIME9$N IDATxwxE[{H  ;)PQA@EA@!, Q;!iܶBM!$̙39{v@ Z6 =z4[IXG @ ^zl޼v @ `0w\ @ hx ڶmTt@ z#=ZXA @ %Hɪ@ @Pj-@ A-A+r@ ڃ,L @ D] @ E@ @Pt@ !"@ A-B+L @ HY% TE(*7{Hq@PdtjlLZ`1YP*|Nj"k4h4d e~KFF%$TTEfbSԢD"`H9MOrr Z߆n8+*ӣUlf3W!HBӣłRNX0[RqJB @ 6N0/EC]H>-Kɡ繁PU>I|6vE:[mݏ_괽Fg>/ĒqAæ<-]zUڟ'xUsy;ft9|b<gRLzsƳtbk|;޺ @ !N.e1b75ZLXe^r"u$:8sl/)|!M\XΞggWɼ:2GTPRٱj?SӵY]=u#)h5iGxe?ĥTe}h٣!T #a9d$$Wd[)oNP6_D@ jEFo#) K 6k4 Q{jj=.ihN@1:Pd^CsQQVձƥiC+ ]dNq"u d4pʀdNR{hR=E] AP E 5{7iCô0NŚqߒ04PU,%˂Y;M0לۇ*Yٷz g w68 \7ǢH4G}:cPVJ;w~n%'8&`l],*MŖطݵކ{*6 R# ۾蹳0O8Տ!,gxsx͗0>%ǃB)ϵu{#'<N˳y{I+Ts,xjbv_F!jܼSiXoҕ t:fZ#q!=mٜuԘqfc; OG,Q؝=ChWPNڷӋ{!3">.Y@PD3΅c߅Bɸt?ekA1Bp<<4'v,:j`e|LF@8b^Jn+f2A 1)IEٸ2Qˬ[)ǥ@7vF?0O{۸GJ# gL~E-,?gp_\Y۬hAW2Ēș8)]U 6[Uw$0F"wPWk\ovBWI ϯQkcz` E[/܏={ OлdQ;Xy#Ә dǹ]EEBUvQbxi[8z"4>gCMqup"8O[m`N=VhҮXIct@ @B%77G{)⫈z̘oTł;?Ctt@ ]=a |OO9t~[YW{‰/t6gܦu+v\V YUXUkavvLYlUdg8l [MuVR':w`_)\_E5dG`\ jbg-bK'2p т%cq+h}u =ēdP^-]emaiVٕwvکȾXISWA@P x;)'3fMd;́GpWUՂ1uT h֔\|wC"fdllo5,;;59j Ժp\UGCUQՇ[ .gzZI`U{fq-e!łD[ٳNrϫ2.>eI>|e??-T$,1Y0Yx0_ FEW?dg 졢 !ʬi|Ɖ_vڨln*ݪnw^hBس/]{@ kG_!{<?Gb3%@`.nvJbor'Ն]t.ĞTI'ͽ úzS: al<5С*rws~_so K)\noߥ;d.H_w'~ _ncOA@P4,/9˗ۏs66sH8z7K!<|[]t6ru=EUQ)Z)Z͛؉7 }>of9>l5[:D%K=?wŤsYwVw?ġJVq+!ؚwpCztm䈡@O8®K$ս Pg"Q Kiɘ^Nۣn{5H$>lsӯlf>0/gQ=;鰘sX"vUKxO)^'V8J@pgJʬb׉Vxң;rguPbY=%R//SJKK ] A u4 Ռ)O|IZhT &d N$YX=^HgڰMrve-zFFrb"ۢ}~UFg4椗$,Ydխsc0rέ'u]QhTE!lcHeؾm UJYǠ<Yf,rL{v#!tZ4y+V&RyXԥlR_$N53,a%%K{ .@ "D@ @P_T$@ "D] @ E@ @Pt@ !"@ A-BD@ Z @ A@ j".@ "D] @ E@ @ @ @ V@ 7$Iiۨ*f@ ^7};%IDFFx?Hq ^O ZK@$-@p3眗F/.@ @@ B @ B @ !@ !ecK\R-ρvs.]cA{6h Ǚ&[j{6qV]TϹyx2lBveak%VRXI”_PjW|x ;m oDzm$XʹGF<?Mۤػ2oMj%/5~iV=Yw#ZcY+޽<=M - {IlV ~t1FHp km_ MBey^^.u7&^{5UnPc,Ůo-,/:h^!;7/ ~Rj?ZG7կv鏭-.vhS^0s ' g=?<ԇ{Q(]n9¶J;uM}2r <ҡo.fҹeQ>_˿=U{Z' W|kpBVˌQRWp~_;j LuEl|;0j<ƕR|F)>Kǘ=MGOhH4/; kyl)|>!Ndˊ|W#Fmxec?esl^;Bǃ&=F!pK{ 8{(dt?9Bhl<09FqE\W+2An*I^#,l3M~?7%@_ G/gỤm fLjC[+VfO2iJ<ɥɧ&:ŪX.yuWkx=KL{s ~;*r9 Zh^/?,BoGM% ~Z;̈́^H,/;܉taw>fvǽ/bZNرeկvQDyMCw 9i6>^dVMT~TƶjVqNy`XZ9|nQc=dȟVӿI{뙥)(o|΢uѥ E( l}E>LO>72&0g{8囼޷ܲt,A%ٳYHc޼).oS|!]F=?>qur;HҠHFE[p}] }2hL|6:Kp| 9mdgl@ Zvٹ$olTv,:ROIl@^eJ\^Њ>IƗ)}-6é4,+Ӳ&qkJ1YW?1+t g\i^ <7ըU0mz+V*o VGRMAÕDޛ4 ٲ= /L IKW?gژwpp'CB FKy~ݫݥ-t+7Z:[/ Ѹkn/[z,x-p]n7nrH:E嵫 |RzVt]rMxlѳ,lQfnow 7}+g3ͯLacnu~QY{<ƴvxwk뵽D\U3jUB\ ߘ>G|˙$;gv~8ؕE%0zknuyl񇌲.c:2u<.',WTg4hlj3.?[r'v M≭q遱%/˸lo1Itrgoq.zv=oDdiqDAmT;fh}q#x+rw7 w].]ѹ)_=`RM21WZ ُw{2*J9- z8mpL/xt|7yדxѭ#˥̻^!9Pq |;&紒Hbb W" =UNcVL9wsJN%# ;~"j}pQ9p&Dd.h>dӞ3\R 9F&%&u Zwz]4[Z#0)=p(o惷7q߶Rio񴅱eO$) Qd(%7;>t'J|Rdcng5E#;kJs覆@PL{\ӧ-|;1sH'_Ztk [n]'1>3:oZHG\agΣ9cɹ.>{uLkVa,MӀFz1CEڇэ Zykc2/.q\]ʴUxpU (Au!@pCP] y\X] ^ԼKj4&^jW .Z+ cSZ(B I+$t@ jXd@p(Jw@Ay?Ĺ77'@ jL<$)k@ 0"n& FKB @_τ@A@_ۄ@ q1܀92FF0 .Z}!+Otc=sYUP?S(kZ¶+iOuO0 d9v:i9hM8oLa؀[=nrs#YnR?3f;v=5Kex:vkGۼV싊΄Yp^qI@U~Nפ*ĉjy $ѼysaT@E˨wh# 6ݬ{{}vNW\*sİs󟤏x5$-CWJUmtn:.c,D8o2]PRbpRmh57Aem135qߒ\H"]5pgaZED6Tx蔒W]m2s}&$d ~F~ԩSԯ_I(Vs^36'OҲe{[n7*300Z>>P:vhߑΝް~=DVɹ\]X* C˸R{(iq[@̜ugmtvW8To9 bՙ7Ow18~{Nݺ g^BZvML~Y[Ș-~Occhx]L7nUUM(׏vA,J`'~ d6Ezя=f1_9{3U$IU嫣MYDDM49Ν;w"Z8t/34W<9&XInmY#8xb[)ù< i lP2-cĸcL} ?©#,1}N<4 (gÅrK]GSBTAyjE\>GDJVvy63_%Qu+|'32WyOK ?Dڑ{CIץ=UTt:z=xs!_O-/;*W%0g>gSzn Ꮾ֌e+^Vz"z *Y0ڬt:sRY`0ڻ q C}EEQPkO )6w=j-ZԹ3ieff[{h[a۷#5jtO$)Be@ת',ϯR}|I>sr{!A5(?Y4e.-#.P3.sg,~/ <"\5%^m^ֽ [(O|U͌!n;V~Vͼ7odkbyފL[&;'_Z6'L[kH<~" i K[ 7ϒ/bm4(<H]LN6sFEyDyyE[t 2h2捧S<<~A/'|^.| 3̔𜺌WjBY4-SAYw#gA-?jO8::м/nm꿎"6FgZn)*;{lZ4DѪ6pmnvEK{'))ɕ:;!o! ~=--rq;;Oi0i5* %5ۙHNO<,KH9ikRFV\|<<胴lђVʎ^;sJ.sb?l6ٌV%!>+qt9 o77ϟ~:pOM,xY_o_͋$&&F9j86>iHv8I&eů2C&pczWdS,W_>=vڧgH`=O&" M2MX5nR+h Yf4uh\s3-+QƝ6}z.*݋!ܵ Q _)ٝQgZByu?K! MzMehÜuf:V eTryM/=#9F^ tj2/w/,@n?i?(nodzXuɺh\ևwsk^Z~cFr[hĽɺ'O^ksKn<7=WE_cN.) VSZg pb5%5GDVzww""sE^'F%Ibݧ1k6QQUݮ 򐑑+˗kgPV} Mwhի=>WSkR8Q1zj_Îd+`;G.=ʷt(\({e*W`yuS j)6y$~.&[stnU8M]zW_`yKīu^|wLe82F7/FW噖4NT̹%]JGt%kKBܑ9em~5'KA/>džUqCm9$$ڵT Qtjl}VðH\bSHKEQrIYړQpUœ]_eh|jj2NNN;~6RH_j$IÇѼysRSkVy剠4^Ei%K00n$C@BQ9+8qO7TU)w=/7T[* (npt4 bKKY/.lz-z_G'vZhK ޕgE/-AyHݳ)SӟIbAth {./{Ys>hnLYq9c!$"RF`\}ϵ<9̝jiW<;Q2HzWIb|sBV-h}q1H[/[|pQb8v9AM} wj ;><>Oΰ7v8v1io/#pܥN`i)ԖݾwʆLZ1Q`s1U\ɑMAUٰ?YehFMt ))Xm9{D'YX 4ң6QR K*_f?2x]X6l6Ŏ0*5-wth #quu_ؔĹsW^-dFFi gP 54H9-jnze=76NEF ,\] J,nD_bbmxx]s:2: 22iӲ[p<4l6۽%oiSs.^VkS?O]!-˄#n :/FO?`)$%'ȃ8z"-=_$777XV<>4+nr+|By1󦽁h&#+6{t7h(5nQg7wrj]DD]ZHxdxnF6@`dyv]V]9gn/KkZx\ᗯ06bN=Y' bT/yo|^n?ERIm+WC!27(ni`$^-}H4o!7c8^;sSqwǺB{2VHU1'')pЩEdrkFE|{~ewɭeSynN F}=`>P1xk~]X#}AukGj]ZT&%;sr8 ˡ;d^L3kF ^_8TA=2"+~6W+ E4O o7a쬱|-łޣ:XNg{Qz5/M՛*J Rd//dqeNvx0bZ_g^c'{S½t ;SǰDK^h[S\Y%{A<< XLG̗8*W!Gױ6^[-[JHH+Ssp̭8zfV$k!;r~VT}ўMN}dΆ`< l];0u $$Ά]$#3Z ri:mMQ8t CFLL dk[$TvjȲLLL XV5k@P3>1?ϭGDDDhejPzEr#KGN͗-6Ņ_hٜ"KRMHH($n+"l*u3Vܡ|G[m6*vEГqwݑJجVdLAX->YODQܨc8_B6hب!Fjnu󌌌EDQqCJJJEcbbrR$ !(H^(.cзo$HȕMAl6s1\ǷLpn3u5ؔt$d]5g>۝ڂjtj 7AԵ$֯@8;:w^x©:ǭaZI/OOwbc;JbR Om`|C!!ѡM øuw77.FҸa]ڶiN с]/\s"=LV9r(##qttՅFWxP3'%ёD|}}U]PN!:a K1~&4fȼ]\3{D% 9nߴTWF!ݽ#FbPlJ7*OVT(j-&[zﶜV+^vG\\\"v5O*V57UHϏ d2?6_K_?:u5265_M\yw ,T8f͚s>4Z-!mmb/aҚSn-$!9`1ˁȮHz=Jb:u`+Ȝ1`6[pr";8Ə`ި;JD8y;Nf˸&_vvrrd,nΎ Ap@z˼?bSz"un(f<y`P<EAZZ ,`7_WFׯ_ζ1>xuY$l߱ﺌ9bbb0sS)ώJՍߵ+>E[8oɯ%M^³##̓[U"2W'zo3FGMb~wm+.P-~q5bMOM+,*9i*yd2v36|(o)yonY3Yw IDAT$$Jgx; l/y9OsEfxvvvS\"fDڷHvvn}bOJJS.8ug\i5ϓo''ֱ8)g_nu]3'*$6 @ArpDvp@|ejyV.aſ7f4h 7Ome>O@x^#<d\S_3OJ.x{86+d<\|Hʌ %idg`QU$ICJZ$hx95weaSl<>ޙ{=s \vy $}DpN°fy\-]S@`Z9w\2 6PR6CCM -FE޹햐O9q|R\<<<E\4*veŰIAQx+qilՊqvŎ^+?>#8)8::4=Pt O}0^$݆ ~X3d&3 iѼ9urֵ{1ݛhTYR ,8)2 ;叵/t~q-2Nݝ~{o8@S&j:ըd.\g Tmkם>M3 EɩV)ji{B\ FÅ CzY8~wZGW<6HOFH2S=2ts&.zm蹣߹Fd2a61X, 2 tdL "6>6sk&$ԄǰZo]JA ((juv9MS[( jzFa{z^ػu07i"=H+xgOHN]\psu݇kztއC\N;/ZgcTD2l J\j7JVggg5j1HPP~O4j5䛿QTf/ ƂMh@'yTO$̵Tji=By4 jJ|BNN9u+pssYWX,dffIid2RdQ x٢0q&OmyhIm;zhؠII888wAェCm"i)7q;FiݧnNض ZaHݥPq'Bœ mO~amKe@ϝ!GS| RRR''g:B b ^_[mxnq S]vYdޓməJ KlLS& ?jԤ]3@|f*\NŘLkLFz:GJJ*L3 ]34N5r촉$_OZ .•uFWl'b0]km|Ҩo`01333G̜rs6!䋸EQ G:u1L9)5WA%l7ꜗFAhgnfcMli7y/k{L7cVv9;;j헹/FqldN0<;??ȷ|P9]$%9Lk;;;>R{}{OPi #%$G/&q-)zt M+V\NX9=cnFE bak3͞{ñn_92s&n%'3#3g{۶Ǘ)ݝ`t:-65jӧszKa*==EQHIIn(4o޼\\ en|SRQ^ޙ;l^_1&f0-ZZ'ÏJ}c(ЩS'BBBJ||s=< /fm;.mGթ9X[8xFFmڴ… Ġ]vXAi(zWBHYM]( [ -壬JѠjm`Ϟ=tرoj9~Fc6-)بT<ǚ^Gח(իW9p@ Y5, *:uЮ]Ze9VKCFF֮ÃV :Lsq{.r5L6A;wF3>~"'NШar23EI(6,c;r*DLa=N*_5zmkCaoo_㢴g*>nA]A>叠@A tA37nL,' `v_W,响9εh޾'#'Mdp#'nK2N飖$@Aڣv&/$, KK\vQf4;~B)"A  O^-C>VOîS66 pqoۖgfAAkw#ٷy2ݣѻ'~Y0uXO_i}U`eKvB_y z⠵M&`lv5pxai8Q^=ҕΠ%6 dpP '}}iRA>p0o &,2>`MD:9%T4h3MK#q9=ڍ=:П:8?]S 뷠׽hl̙gd|y'ѡ1^xy8}xyh6^ cDU {l,au]qhao#'2d By'>gߕ Btߖxe? E Bb֓܎;Oıll#ܞ|p5. ڧ;XƏ{MGW j؊jh4%ϾtoꋓW7'*0ƶ[«3f{|껣K3B% .ZEKAA(GU?| Fs' 1FQmpg& Pz׫kw})uy'ƱTCnis}]}ƿ7|,l8oТJ}.f0/ٌo}6ͳD ByrJ||:båK00 ;j*kZp92iin?|}<:W|EZ%;>>xyxa6 -ʯy4HIAsΡhPTjT*9&6˗/⊽Gn4p%}sW|Bg#i=Tٳg;v`[O1ޗ׶WjUE۱ssA@T~X5 Qh\KL"-)3wqVmo[4mlj#GT#v@yrHQw"S5*_*(̎e;Ptd,B %=ZspWb\+7,gL ):Z>:vâbEMLQb(^U|E|fԦp%6^oZ>:1wP)*Sq&3jt ~MЖ4i̙}G0OV&Xkz 1*k(RE)=̓iѯ+1'ϲ91ŘI(zՃK!m R);U;sVؗccs"8Krnwq|W) .j?daS.ʍ1Do OgOx~YqOX~'!HvyItӖ]q(n2ow>4 * ZJ<ؐzAZa^%56*E/(jEAR8|'uTJDZ&hD n_ִl\"B^6t6Λo{_v 屹+xl{㋕/ t2im AMӘtd~WDTT7b®8~-_u?|O<,_I ՉçVt"Mmx<O/w2SsĹ="%p5R (V+r^2SrHvlQ}nI`Ovd(͘Ch}W,g?񙪜KyY*48v}K+$mآcI%Xr^GǜټeW0e/iKphϛ_/A㢅g( 8v`h\t$-ztC`R. sow>|s i#ѭSH,(np<Rwp`Bss&۸uOphxq"U}?_?c 822e$&&[ B%˃-[0)e|7ZZv4\ZE>98zѸOd$%V)Xmʉ3A62pm:S [wɧz9 VIK.Kk|{N\s%_~AytRz'9W䫊w׊Y_i6dCclP4lչ(vE.K,eT3Q/K%SjijUnug'&ˆgo rg>7s"tA.YNf7 h".)ØbH]O{=2 wΎ" #n.DE\,ACQPt4Lf׏s.Z%ܔ/d8{NHC͜྽ы#cql+HxgoeWf\es>E9h8}w{Qz)J-FP)S\  ٫/n$''_Wz]K7JiƱlV ˬ/1mK.PKlyIF wq_s(WSw08'Y57oh~1|z`Kt6?VGcJbFpc:'~kCM5=+N9oTkt^-^XL:jO[olNEv(xex(樠Xh^(l z=d_=[Vw`ڦbu˃/2C-4Wz[ZQ; 1h:\nO[r4Q1WVlhtz}NJ*;@בO:<*ďYH?6?I꽢BV@QPYw*֏>=ؼ4F+ "tHwhB``sՓ\1%i?_cgքzѱ6QծF?jQUvoQ/^O>qqvjD>re*'kKz40g_n7IbM'U ~d4u\qh€ѡXldFH(Wsk=|ÞᏏ!;V>߰+R[.J>GS]7=2P8SvEδ N?N\~Mˢ"m?Sk2w={T*eogO>888ly<:^6~ӉVv*}yC]7DzcK4ǫת8"#cH+)4޴3 Vrmш0@ԫKڵݍ5z^a@EF\KNE PGp"ZMR{wF߳ *h4DЬAD;|[eJL~?}9J/{z-)E_Kdi:T}Q\tz4X@Q$GoeX]<ko%n(*A/(wՆ=dmv kLT o"&4ϺIfDr9-=O<`-D(WsgI*4F71mscճY}a'7AGUƶfpf,.e3>؞ն$7汙=}{/BewY,VMѓſ& d勗6pZ'BMj/u| ?qOt3FEۙ:cteϦ}De0obB=BT0@Mｒ&&&z3oyyV_ >^-PdաKnsg%H>lj8Acv^ß~̤5R ^W>G{4~Yc9k{V1,SESOcHPeӚ7޼lt*W-b"-!8-jW49yE.zOOSwp챘-)GxƦ2O_a62ӘH'&R)?Yosϖj-M=^hk'/_s4*>K&i(f=Ds?ɫo:__ƜӴvM̎UQP#)Nr6:Ąd y-Œ_QTY'H!J FSyP6*f?Zʸ%\<5;q9ZaXon[,ǁHeYXŴNo280t[ǵ/BeĽm?gA7}Q_%*Lp;.x+Oxi1.W)'fdt}Nyťǐڮ4,j 9yr4>~6Bv>G*%gi,\Ǜm}"&4v7l _֨)[|4sDqlΐ3ny6pN jh٣ sOjsըmx@&߾G;wtsu(Xg`o:숸>|4FJ%xv= 77q#4ĻI!SNh;->U]:|=/?=uy.I^*r7-tgL /|q3-Y2?]oVxhAQ)^Jv>>NQT{k|~A揊VzI/stc,d?Oˇvd\K/qGx>yK|c,L6SfѮ0V W^A|EAy8{>¢;.دDEQu+7Qtch۬цW_̚q|fo=C)̗ ZoW_8q?"~ԉyu&4%+[to(nRrV@q6]5ܑdMseui)f+H?>Lauߖ!?QԸZl?j+֞0Ɲ&V]F^ZA(eNкeRUl;uX _ºr8?~ؒY=CYPo޾Ӎh&&!fVUs}gwჍ]nR"FUCRcE: N[~Y_&l?ӋN+ i@p3ںc<ﾓ._e[i||'܊(##=0zze' #cDȲwpko8Nц{yu=|x6kҮfo!~?&;U Da{ؑ썟C1[e%<8UMd^fe#z%Y^jX_wA/OgܝtwdSILM'>!G:eϞ=tsz ,vgiϿ$uHjڨ)Fct;y,+5ɧn/VfJA@rЫt.&&͏>ݚ2e +Viˊ+xgƹ{QR2{ W'Lؖ }2ts}Bњ|BsD6@AJu`UԨ 2,$7tٛT)i٥#^Iys8O/X0ws<ӃIXjknXy}vee5T:nKUtBU 31_oYɂ剎yeoel]̙sˢR2<0[ =GK '.򪅯Wxq37)Vxݚ*.U4^dOuIc(s׵D뚕ya O/AٛJ Gڪ3nrBv~ŕL+?GD&{3w[-+|e[d4a0q:5eĄ>Ԯcq~9$E_-om-?N#nL!^o&)ÊkO5BM’㝳Z+Z\=ܮ1,bl%Uzi,J||:v:=e&QX-tGZZX,f3fɄݰ<8h!Wx;o_rϮ Xk|'x#Z1ywVD,u;SG|[{uX { ώWu sٴe]ؼh66&*Å.cyqsƣAڬu_cG?.2B9krowyQpob;zޟNJGNNr< 7FAVVQT(\KP9\ ^L\xd ^ahK_*'ז|κj4{ Ha0Ć3hfm$&ߍ.= o_,4/xW7vLL\3s&H5-LB9>'YߚvbwXВ_]/P#|ל6bbz"Oװwa9__Ɯc *~wI2"]\Dz^bDK&Uc'I/t׋N-߂^2gro3 Zo>֑ƞ1yoO7@qK]rJ(Dxaqψ+x/_}Ŭz%qOyC>;ďgm|v"zC&870iC&:CڭTde.c/2gV/[If lf=E饺YA&E~ (i(T/ '1^i]̢PΝ+2.U\AA ̿2 ). P BBÊ\b&ɍ$&gb2\_pH^l#@A Eķp#&b\36gѯ]ʓ \( . T*u 5AAA*tAAA.  tAAA.  tAAA.  tAAA.  tAAA. 5+W7?DHhXa9n,F3y(Dd_( BQ(t3;/=h+F3]Ū"I~ IDATA  6T:Ox ^tWB s?AA(:Ow_) Ң5}$|BFV`sjIm>qbRbovƸĪkKnTD B%Lټ)1{m=}Ɂ,Z@2b_Y(KN>8KF6ɡ T8" x~-/9L*qq_dZAvWX:c6_l?JKDrŔ_1jW%q2>*fA* VՊbl6cX0LqJ"? ?-YJsh4T*j5* EQP뷜W* A m BBb?;5]JyMS]:Z=3A*eXn7!aE.spNفUILd뙿 `F(/erjA- HE tٌd%&c"-E P#U7[n-J{q[OKZA*. Ձ͛KiEvY}iOo&!^ PzeAA(h4y\ j$Q\N  BU Qt[EAADWn*  "+H/  "+H,OAA+mwÈAA  T ir5Zn'! Bv^k"߬J8XH \ɖ3c_[̍G\,~<;Y̘>,ah,,%%,)Z|Ji_IJ ]˔,Q}nf4fnL|<<>9||{'XH0{\{瘽^{3DEDD.w^5e&3,~r~?C_b6{?5sPÝ˷hdcM,\e?1Ob GD]DD< %4OlacrmA f*}>?q+gY&[l쏩O3lǟ@+fDEDDJ_zv=Vl̦I.ܟno#7o ~j?G|0ƭ+G o9]Tϗ K3p+[%>Ho3HrA`t6Hxuzni#K-{)syIqq\fEDDUȚoO?k8kffF339ײ>!c TD,}U> k7_NؠnVyuf f{~/%Q?ms睻i4oc! XL`2aXX]mV'ϭfONb9n}/= E]DDD*5ߖLz Ov4اxCeo k'4/o<8ShDp[5?QZ~qR^g:#! ߶8Rp,+Mzhr\WD]DDD8ȱ#MT /}Ͻ@^K Ri0%8F+_%'%"S9i3ڶS9E0U1c 7 [|sYȍEG"Z.""R"h|cCa >S'" t{`%_K!_ Yɉ$&&/%w f/Ѧ8x4pfi2lx2?3\Gټ$e0Y$3Ǿ;{a6N:8>}smAA)^Ak+ ^e+&MR//E'V0l8Lѥ 9uIur3춓|<7?TT|BylT«D\ۄ n.1TF*C9FGí8 چ??`Q@MzM~M#2urgNgsÙ?&uvౖфЏe4tPK"e)))}v\\إԽarp8vl6999$&&EHHHcƹNӉ 00~޼k/dn-Rƥbb`61LL~fEDD.g +p.rP@qCt `_/" """R:\Dיi0^MDI\CeY7qR ]Dt+3$Fֱ8X8L?/r?u;ó3>`dz!O'Lt/F0Z7S+s #Gz2i"}-<ھ Nb9y e{ٗdyIQD]DDa8͡ypK8kO 3_aJԎVkYC=8-LaH9-iۚ&Z`foddo b{7_Pt7U1֮?ƐZxb'>>xrＯ4ά8LrXVFfA=5 o-?Fpb6xgz_]@t+W$Հ3yYLcԔ|-&7&x·-z` ,8:ZgG:5޺|"ejB@C ""5F}058>` l2yi~l_/\9_s*{w'>F V5?̱/0N9FlX}Zv(ǖYo0s{8=o.ɫ*_pI ;ݘt &ʷ~ l|PzyGPBp߆^^?%=6"2uƵ8ӷ |Uf◱Pg7s0'rƔT 8bcc/K{1 rp8l6rrrHLL$**]a20sߝN'NA``]9;y~S8HZZX,, fɄ7-9+""r=%g7NkЋA3L[:R] DD*cuŞf5d"WO@7 6d""rwCxNauo\ivq*QE'""rY1O?@\i=..FNix[dSl\_ꈈȥ)tqZll,XB/rZR"""""r*b 7Sh@[cR@/o}}HI/(Ha<4""R$&&jD*~ )Ҋ-%."""""ttQ@Q@ttQ@Q@t)}dvl,וۇEEDDܔm0cu;>EVw^}QD]DDaw'Ë59dKxe?"e@DD< )nӰ%Z-Q+k)K4.""R-qIf81r4wc:Xa3QNA7S\i0^MDI\@6Vctߞ‘w e76 0r1FcDwxss`̓ۥݙ{bƖc6O}:mن[r?o13nɸDZ. """eW`t6Hxuzni#K-{)sy9Q# ɤ9Xp%bb,>0*]xn(x|0ƭ+G o9]T?.?V'[2,^0Dd זwlڌ~yGn'| yq#]˭pCFolJxa-HK\DDDJɌb łŒOofzk5/ n|j!RƱi/+ѺSwaHvBsK!s%oe^}QԬppoBǭv>ӟJwt୯p\ӲjzBHx0ͩV:/w~LZ/=E]DDH96͂{)j+_}qf@p&шj>%ڟ970.ЦOՆT4~i~};od5.""r0cȗ,-z` ,dDF-e2QS󅷘ܬ2b`A[=J#9t -\%.\[Wq<<ݍa<2MjE!"""1d%'t_Rj.MzD:杧HM$)ۅ9J'9#Lj߳ qqb;D_Ocz<"h|cCa >SbA+|K|7g-_Z.<ͮ?an]̋,";i]VܻC ƱS1qئ.͠vG?8A!7 {.FeΜ35͉DM4c- /&ʷ~ Շ3+m^nbפWʎWpMDW_Vq ^iS3~f{qm*z^b. @OH ~Q9f/fK90 FͨiZSJ)))^qqqr;Quщ rp8l6rrrHLL$**]a20sߝN'NA``GDʼ4<<uu[DEDDJ2}w2}܋8,WfIs23mf-.""r#]yY: lX5;/.""/UMpo*6ȿω_=hՑ.c80r1FcDwxsvfgXLzi4oj$qylGY;e;@t[;~L9;;m'Yߝ+Ơgo+n{/C#>8ןϢ{?җGDmlc%Cږznُ+}'==D[oRi`S{.EG@ u_ƸyhPB5<# Ĥ9``?i#<>y,Q厱z3kN\$O<@]S~z4ӎud[ӦJ#uc|5E)1=Mn r>3 :yq^yv5j6k'&-|՟۟MF&Q#<䟭/o [rط+ԿG=fZRhDp[5ղ#Dz47 &ЎLe0wDZd{oL˧jC*?pŠ$zVV{q.\3$ip}Q]ܘEEDD.wXMWM¯?J#9t uio059.C" b6X3ܙ <ꟍw i).\[΄j M?{#;Xk{Nsv͡KHcQԱu_pwLE._Z"""↬=ˉlDAf=~S{*[ˊ?l+X`ӧ_Mqh<;6nx1_mүIf}w1lgmt+g|oǡl>`8qEy]fݺYDwҺ"h|cCa >Syz݃ǞcnNO$1ʷdsX$Ik/)g?Q[̱LSٻk?4 ngW(>}s󾅧mRt9}GF1D\8U7Wˊ3|̵:MʜCx5ۛkP!\K]&N}n8SӜGԤN<2 Z5NmxR5#_F>`_xJZ IDAT` T~tPścj0h vMzxפItU*e\ML1u:>sxrmLhb,%m^7噔w)ōc3& ׽"_?4z~}`GX2t kll"SRRRุ8bcc/K{1 rp8l6rrrHLL$**]2*33ݻwӼys U0sߝN'NA``XЮ住Q[Nꔖłld2a2y%."""""-qp8p8%Vvv6NHc-r5H"rq=..N##9vXt: ӠH^ 'Ӓn*AuɥyAh \ɴ]DDDDQ@Q@ttQ@)DDLHLL H奀.""WP yiiiŖˈ((((\3~">˥Q@2gkc}K{Xiޱ` .)ggh>oNfdYqI7ڳ=Nxh>ۊc'~n?c %rP&rΓ<{ʨqa]W~޸Df0yIc<<;}o< Y}˪MqGX8سt {QRz}^Ę'w1`ZܰSJ|'_{Qg~V*4msm< )3cajؽp}ɪ䦌z^J\BUZ ["'(?TruwxQ?4 #UD`;)#[BqcJ^ 4I/MV[$.,(w0Ҏ+1=F1cKʟFr1[cDwi6Jq{w%:&E/2v- {*#]*qpo'Yߝ+Ơgo+f_>_\7É?Jt [qc]T"B3"""ŐWc/ѻ,v}z [`ad˴LF~ŕqSlwsǪ5~^fu;32_=Q4.b_QDg00>Ͽ+R*}{ꥑ-\F5͹^UB$y<`ү &}}hU3K)trMh݉{a3{*AV>|e?C k>ڳF<4(L'ojO٫YQ'l'K>NHk,o //yD:杧hDWJ< mrO]Oc 폢E.&+UE9Q>go%c zz434X"2urgNgsÙ?&uvౖnh7^o;7Ƕ#OyZ TpWv\i.+Vΰٵj+w"$vkFx?|H3܆r9 {.^yn#dM:ݕȋ99T4$$LNN.p`۱l䐘HTT%>0~w:8N)rf3& ϛX}eDDXܿoZtG(}Z""""".""""" """"" """""."""".""""" """""W} )󼼼EDA2/--2Z"""""rQ@Q@ttQ@Q@ttQ@y\T-G|Fmo \KqL;SVx#M*`*a5To8=tDЋ eȵ•d]:tHp?\'9N%sgV|v렞<;]¹:@>C,P?Z~BӻҪיQ~4o8I:CExbzڊJ\ӧ?ʟT~usZ/66V*""WK $FDUs֬`cT]niAU_3aq_ǁ8m"9 ^@;g`K\ G -IV]YwP|U<9iXk*\W^ysr]?6(_طKNN֨F뻺 f5գiޢVr.gX~=wDpY #oo@9M&%Fz 펿 @3f>cR0!79,=\.wui~]Cٷ>~hۭzT|Ѻg{*wrx,[kGv&EJ]7BZ[B¹gwPDD&Ϸoy4Ҝ4p3[jn`\0e :9%[OD=쇈;f oI$8o|vu[o*ƫ3}Z rqe9,;YR'WI;@|.;ೣXw ?EN`ŚSD֞^^N]DDb??éw?H ɿE.gzCB^@1ÑNҩTlFw%JeɅ#7٠®uKjAR~kEnVj!g^#Z?8i{ |||Ǚe[IZһ̀#3gڴٛ65|1akk]Üʴc GobkN/r{@*gI" ZrvXDj8#^smVä϶N]DD]aLaD7?V5sXz]B5j 2o}#75;&v>{wgjeB7q}T rpObFhO`RIiF\lFّ7\T}% )2in,/}MhhƵU? sLfȽŕƎEsYޘ.R7SֳǕ3lz䈈̍ ]NnV l5n=kM&J MZe;HէUԥZ/Fց"Em#@Ft&:~s4[cdmķ%glIT1 u~7| R4kD#:ʺqؔ=o!: Ɍl„ Ɍ92<_ɿ?mugMT3 {rvv vwAi/Iwix۽zMDDa' M:R) nhNR?5(]{kk]'H?Ah1iZm:N~͛ؿ.q\SH\DDB pgBW9,~Zr.]g ۾#'QMg~T$*>~Jl5AQ7O >:+-1%""6' 22y_}ڵO'0u/]/Ц%X b@hyZxBQǠ\1_9nR&\Rɥy0p\8v;6sgƹNӉ 00P#";_Oe^_łld2a2y/2ECdRreaĉŖy5P"pde"6֮>NX[T@j(|\.^µr,ÁwPw_1V]DDDD AoƷ^g5""""" """""."""".""""" """"" """""."""".""""" """"" """R,g2;6D|Kc!" """N~DX DL"+;KKڶ3 v(|~+Q;=K77"F z-Y`0yɻSódʉvKV%7eýRfB7lǟ]c$(<~*'"ź_&O.""RkIn؃VQR>;(NwsOƭ>Hf81r4wc:Xa3 ]jb?mGGб+1g.p\kNݿ;11VA.!_k؎vwַw:Nhd%U^ܩ<9]ڝQؒV˕Ef? Nw\JRޫ7w/8rjxEuCFflJx0mnWulbkn{xv`$md&LD\xr {m~r?/F0y|XcgxH?߆`<‘AL3 &s^V'oeSӰs` ~{a%WGǎyؾAqSլMCl5;Ii4CY{,~#<׵22Ɍb łblrhݩ&f#هzq$Ƃ"'ۆ%0Z׶sN8/wZ-tgٓs4mMJT^rf7ya{;]cPFc:с=1%W^Hgޟ ~zh]DD-9[ ىLߣ3xh nv⡦.C[wWhgrmebܨjYs{L$eO[jrcY l՛Z&(S. =DJ21{{c1iED*da}q%oT>/ܱj .Dy0&5fE@7͘00K& YLcԔ|-&7&x n&^g|3#x!?K|,z` ,[]2 'r%[ɷ?Pb6fO0 0+d~'#~v6IGA"\R֟Нl[3^3;)zUٵ;2v%:[^qsY;33>D>Q3͡m;5 hf: ?ȟ^awr3ؐFE?`|GGgp*䛭mHcK_rt #KNNȋ\ H3JsPhfw 艈kmިAQ@FfϰtmwT "f@/ ҹHI_Q@ttQ@Q@K! 11Q "e\BCC5"R楥[FK\DDDDD.# """"" """""."""".""""" """"" """""."""".""""" """W g2;6D|Kc!" """KzXn?S ,Ֆ>owL"+;5".""rQqL;\nɴv(pmDʧSY|(_{Sį40\nןS*.*uy׿%`'~dw! )gWhţUGi=~2ep-̄ ha IDATE=Bų+y6gH &G|L;՗i ߠ7>|F=΢c N^ǓPn3mS -EN1?X@_xq^z*UʄO$*""aBx qWD}j3ॉfTgh.Ѓ}b*#^}}!N#yV7y]fr) OBjfGWE䟲J$ O\Rɥ6arp8vl6999$&&u"""0sߝN'NA``GDʼ4<<>p&G6u [d4ɸVǞi"Fۉ(܉2NWsП L<ד5'1Pc&OlG7i>RΣ37+b+ x9 /i1 +7gnȳ#lB^ ES? MLڏgլ~59Nɜ㍘["VOė ֋:\G%zMඹ|K 3sI^3Toݟ7}2u*'c{}ȯ#u0j Rn6SNp")Z9_O/}KcXhԛgLJצEVveE(½0jG?^2St3fCɌb łN>LwzZ剞 Hh<^\2=Zؠ:,f'i6,>ATP*\\`EQo NS"Iϼs5ы OgЌT5y W^<^&J˔}+?_Xw{M,Uc ˚j -]ŏ͛P X~Gͧ‘^vzt>狯QW}4/""_#穗{ΆNe@=onOSgqhVXL5斘܋0lÌK ') ͱo$HR>oTi+g;3]o CcU+Q6y;L`Lǚ_{g-e~Fj-rgtG* Ѱ/e!`/iXf|7/Y"*ȅsg,~F|j>E<ĨCFk)OQ YrwmN[o?#lT\3Zٞe)^?,0n;Y)SH~LZ!]# YQ,?2\_{w)կ/xE Uaaa(Rf(5_xL s.DDD ;Vָ_ dM>؈ˏ.ͺyΒh%.͉90Ų`T )#X{]raulsc4̞`8p^1mhD)o~M#5vg%Yߌ_(Dْ^ lH5S~Ze\|<˒jaeo$8.Fkm;fuXAܹeR~_bӝPԛrx_ɰ'L=J].>>^U&[, gٗgx*=ISii[<Oo%aPڈ|^:q~{d,xS1;Ɂw=TٚWS*8 Yw,i;U0Ia?f̙Vs)j i &/3י9 n;m?"pS DDDQ+Sn7Yp}*cI+/Ɣ…Xr'0gM xfqi⅟ŒqufQgDz֗*~&Aq;:MdT# 2Rٿh2vv/֣)ih߭ gv,[Oųqdr+$%KU¿(;~xYrojجDGǐ,ӗQQ@3zy:ON yyd^]x۔Ini?$z,Ves5)f*1#鵔: OOq`:nLpvt ?eMIgcִthJp!lNƥv٧ lӃQӭ}KCB 8y;L:JZm ._}gr$aSҾE)G'\[Lǿ^]G%zMඹ|K 3sISo)jczϰ|COX֗r!][YTUxa'-OYYH9xk|r< p]vFb[ׂdO9duƭYz5gjyWqİnV3|3_ R>\G'`ݾéuy!q5z1 Jֳ`V5/9:΀֯ӥ}Csݽ}3XL`2aX\zbߘNOB+x<3S!2B,~nބ.'w]Hh<^6hGcXٰQB9<հ.pbvobɮ|+_X_Tſ^_ cyN]DDD!y>maی[ДA7` aFT lGݔo%mM9:{J=ÏC"ǚ`ҝ7ݥR '`.ن ,OƷS U-FdzTp#˾}Q@k8s"r+Et45[θ>W\Br-C I!@r=3& l,E)^!˗\%?FΌO {-CN6*M"qzycq];eiu[\;tWbɄ}x +3ڼ ?m(D ʖ"sNj5W\bͻ@FQs"F}'yΒh%.͉90Ų`T )#X{akֱeaY0{y1;P<~nAƕcc+ଋ}/rOy %aDGc˖Hpܤ؎z2Y=t<#_MØ&Lۆm.IW^u:&A&j[, £Otf7Y hMzv(͎ܴo9msG% #:ҼpFf%clVMDLߍ˭Ԏs\qALV!oH-Ϭ@<~+o\?*kjs)+]pHhٝVmI$$eb8lj_HǽETE]DDN[NgM(VZ^ȮUP>t<6反S)]\DDDDDEDDDDD]DDDDD]DDDDDEDDDDEDDDDD]DDDDD]DDDDDEDDDDEDDDqˏ?T-DEDDnL$8$Pir8ue^TEFkFk8qʐvǾקw煄}>NmJHۧyi$8nIEEDD|~NT8_Dp:_o ;S  Nv)rf Ls#+̄Z&tb[sf/M%l|[?зg/|#=Y\noجDGp3C;G[2c?mckUcui'xo|^?{^\^ C3en;ѐ?}KّFuоQչLE-C!lN "RNffTPC30;k@Mߢ#&פ+3_2<46س5m8ZB0l'8k0Z7&I;rK)yѧi2XQ^U/0h1 z\eFA0~c_ֶū_౦IpL9: ־62og¥PyՅ."""QmJSQGۗ%9awOX֗r!][Y:m$s7bʪoX=12[zgo!lxZ%,eșѝDCV?|>o-{^k37?9n@h5/ 7QThHbo8Om`ԏ!C>R3x7b!ɢrZ]l/ """rYF7lLF YۘRǾbq/4XL`2aXX,ME:7zYAzDmrHrpݕmXݼ u+|2J,7w7f:Ih_牞"/73| |geX][?J|F֯|SVUJ/N}m1 >ײ#R][ ݺxT\=ZIź^4]DD%^gҬիc5_m:γ\q4 RQqR(eʙ8u޴D 'uv{Q@,i-.L|ԋ7KTLI+J1a`d{xiDfB̷,vɍMFp^SvE޴ن,E)^!˗\\^ N1Gϧ4(nXqFЭ8R/fŪ[05A]o %]pHK>>_kUߝ 5+6ԢヾFiݩآeOm6~X6/XfgQw+$%9J\s@#6NaSl{X>{-iS;:ɂX|t0s.Pz>˂SY~GDnbϹt,~_rܖRba&G1mȋ̋oɄa .řߣ8s> 8Za_ӵ.uQV_6õǢ.""r+5'7$ -yL >BG5Gl2")u# iu8 #3O\z+㺵Il)?cۙE3D"ė'3~{mê)ֵ;}_ɢeJiiyd6CMQr?Vjtad \6U|Ktћ&jxDZe)Ѿͣ<6x1'Nf|y9 XkV~y3>).../qlG"Rֽ^8y0p:v233lcZSN"""w$0.;vG &9?cpU!=pssÒu!ٌddAh?+n׾H40+c:@E: :"""Q!>gwnwiRAdiBhg꿨`.""/ "rzXX;wi^XǪxc5o\U;wS>Tu/wMni3-p{H}AE"""""5.\$jhهx_Yb9j2.%Q{} 0p""R!ADz/}nR:UDEDDDDEDDDDD]DDDDD]DDDDDEDDDDEDDDDD]DDdm{֍m0TQ@rzITjY @wn#ϧa gfSF L߱xT/F};|)^w5'2#j+DG"#̾T:k]>6W,RZds~x|ݟ%~Q@#eԞsul7eTȎ 6@1KV?MzT9 ;/+S1d⬱ n+Qe'%h6f| N*xч IDATy[6I(mH}K>ŭ,BkWœv`:Ӈ_[Q<Ω_f*4{5]/q NA@ITi9u?b-A6K2x=ҞC{B@7RxzyWbz#}XŽm֛|``29q20y;"/>;uTxy=?ʵhΟ$[kJott;Ow'wa5'DSݽ_V3מnIQfL:%r ^|qq.;&{0ʕs2Naߒ{oZɧ".""r{~ľoA]_?}IrFȯ#ni sOv³\rSNIML{ɷ9=á^$[r'I+䙇9B&9\{,"t|pnw+M X{R&`'wFR+I?ӟv4WeJ6IM0$jo [ij7Tp@w9y,Gxn~@Z(C>Kp|5?>oQԬ||[V_?>Hr> ( at:dffbHOOjRN>0.;vgp߱cZGcgKbb`61LL?kDS\DDDnu#j乾*(s"~Bw*(1<[VIsEDDDDEDDDD$7.Mq sΪWWD䮗tsHtQ@Q@ttQ@)$}>NmJHۧyi$8 p4ʼLZD]DDDnfRYg&g|4#|ty[?gh)LͶX3~L*ߘJ ""#Mcc@Guϋ+UCu(5ymG7RlVcH͞M" """_Xa]3*g5j'ؗܐ&pv^zk k{:0`ÀEş1;6gXJp#;+}̐NS+Qxէ7y?fdܩ]>TmғW_CC?""".'q{ByqbGiV Gɺ _<1oqOX֗r!][Y;&:m$s7bʪoX=12[8n!ƻ!Ͼ> y-OMC6HeL[f|BJXʘ?J{Q@kaSVUJ/N}m1 >ײ# &3 L& #KËuto ijىb>%"bv $[wʕkӶGk"1qXOB+p?O ]NEWN(vmGRy)Gvpܭ<~jA)d|q4 R F=JUi+g;6&" p* ?Š &ײfo/" """w6:tklb0˽EKb-Ϡ7ruS8coƄq4l)^?,v6Sǒow-E)^!˗\\ TN)."""0yWibu#˜6Eŷd°LQ9} -z'yΒh%.-簶9}f)6=,f}hJχbY0z*uёM݅eel:\{," """~,ق7cpգ,{+@>^6V٧d&qso( ^ɦY<6_sֶaP6HYqi>~6Koe\V41-0l#\9{[h?=6aՔAtڝd_w%SNiItXDnx@\\\_hy0p:v233lcZSNEDD aݎs9n("%)) 777,Y͘L&LWh]DDDDDEDD\sw &" """\rr &" """w | "7DsED䎕uTDDk ""rǟE).""rGIJp8nu;F;=,vYV̾zaV}M~m(FQ¿2ޔ'#C#""R8'9ٜ#\,D\+e}ݼt#߭`VD܏k"4ZE~ADDn 9-:ٌT;},+ү] v+,F (f?4}"&Ɉ-< øjD]DN}r$=QuXX}y3L8^Is\BV͛ 1t:/4\D搞Գ+Usq8R3n n拍 vDme+!""75Z=+[PKT{=U$kLH#H94EDDn -(ze "r7^Kr9nNNff&6tV+u)𱈈ueW0BP+.""wuBHW@IMD((} ['IENDB`parlatype-1.5.4/help/de/figures/lo-customize.png0000644000175000017500000025614513171727132016610 00000000000000PNG  IHDR39sBIT|dtEXtSoftwaregnome-screenshot> IDATxw|lI$P#EtAE"MĆ {UѫbxQEE4ҷyd}7B>ߏݝ3g9̙3 B!B!B!B!B!*9_B!_B)`lٲ#GjZm5Ml !BqRJs.\g}V#-ZT?//oa-:jՊSB!B ضmy.z}%lٲG|euHKKl6WV!BQÅQ^=4iR'''y0cg}饗Ѽy5jt+B!ę-,, Z;999o˃oq# j^բESW!B!h-[$66vaef偸fFHS!BQ&** }Iq 5Mb#B!B C7TPiK=-B!D-䶕񮖬 !Bq<67 =B!BT0=6F*o *ơo!B!*<6Rxo!B!33IzB!π3|B!B\us&Bq2 &F4ej!8o!8 Ϲ[l!ɤ[!Nfa/k(Ci2tM 8-Ͽ͗cl,x)?RB(BĢ:hyT)@їkXE,9IUZ>ORFDI_¸_Xfve M1p]zm3[`ib"b5Œ޹;$b+78_37F,e Q<l#c\I~e mp^j(3`k-V ͩ/za J+涔Qa~}}ja17i~ut$l!.% YqyV< !,Bҳ^f0 ˾IKwSory]L.#R(0MLLb(\1w?F?4&OF\ oJ_į,_1= ӆ4 <QZ8$vJKɳIBT~:CۑPZHayotrgz&,ct$BM2O-mt#Do9]΁k.Y@@VxW̭Z^ˌn G0f&ͅJvo&)Oݒ1W} !(#=BQ)ly YaL4'lC ,nĝMѧЕB^Wfu `&fW0e8m o+ަH#(hjGcYlsL -/ R0l~ umԝ Kj֧M.n=H '׈=9s,C !Dͧa "Ҭaxcx4fQc <: f[V]6Anf)bQ0GDf2:b KaMg|۬Z` l4i`n-Īf g ˂ ꪫF@Q_bD!D(쥅>FqATUX (c-)''"|J`۰|OWY!DeP!8]Ǎ+g5B&%`G !YOzt k¸Ũ,Y㯅B[!Ne |B! -B!D50E!Bq[!Bj =B!BTB!HB!@zB!-B!D5[!Bj B!@o!B!B!BT B!x !BQ $B!H-B!D5˕ۺ^o>kv(Gps!BXxh~ZL\|S[W6:CΉ<B!dIxFuSl&I,tgE!ƒJxӝ훵NwB!j,QzPEB!ܼ\'ҪHF  g22_ʶp6)oqى,G!"srٕ>=~=բI0NwVj0 Y&j,uvvVZgj=K!f_htbRUUV(BR5}=^J6]@@;=ޡ̧!=Cd7(Lש];3uYʮSy yn{9 !TM 1I4!r@ Κ撰"=ʭ;(;7k5y?+69Hru(u|~SyڈG{\jΥRg"ނgO*uE^BQ|ՙc|Օo営scܿ}%UZ"U,-~(BVu=h(ס嗮ug8b9M]/kaA_瞮swv񅑌/7L=I5g^wrL' +j-W~x߳,C~B!$QJzc6eV(1Ҷ=\'2kO;-Br[dkaMšni*T2z2e;E8aɷ X}mumyrgo^rRm;;>ÚYdQ?h?|;+0↻x`lfbםՎW$^g_4̚6ˎڕ{Rn$wf"3-PǮٙVgsvrтu^\wv"2-PjT:˼p-^{2W.i+WeB@1C/grl9c Ʋ!ejmZYr&ƭgQCKϡq!7vy{rtC˺18iIvEa2W1A d{aQNh 44G깬|i^{.׌{syFƲe]&PWsHhcrqYVs{W`.#8uΝg5:U7쇖0՝[io;]e|ܿծ=Y_3< 7W,c #֬J}dYe"skOc5z1(Bqn{d{{i̱:.G9kyJzWy)G!"* Q ]SΣ JLI_Ē`H=ǁ[dG{)+8{P 4rZK*^h x^t"|r_bحJѧtNY ,=#O)+~;aC~ԃHZq;=4N ,q=B>eBSG}Xv͈7rc9xYZtf/ē+t-Ѝ iX6Zvv̧\n]>RY(彯$_emvFbbc@S1BvkXWO vYgncBi&"HH0y,Y=ev0hT{dwɿs1{5?Rέ9-`zdUn![W8*]z0g,=YksOw 61Jzద_yI@Yrλu+GJiRnq0ЊOl̡ٛWVmc1f X~ΤǷs5Fyoko.Z4: 7]kg^v(MyO!ץSĖcS L4g''oCٶ%~3X11` gWc_X| 4HĶm܂/c"MYZ~gpeǸǎL}aMĒ1ISsKjXSfcn΍{8nNEq[*ryg@Tm9$7\^g}̗wM1Ϸ#tw7m3H2~ [>?މGY1MPٙ8PY[F,֯_wiWĵ"xy׹.#d:^6Vie{'݉2ףzHf͛EF A؂1 ަ|aFhh 1Mr0&Ю_o:y{+>xiJ{o1hի{zBYc4PE5K p?͜ )Tq6yWq-0!Sɱ>4eט":04Mѷ0}6GoXnv.$g  ʹ,|m:ϾK٦e^–O8"(|]lODg]Etyv ]̀ҋ2xc[>ᙾ>lg7{ ŊZڽ<r//]>N2G7"\)Ta'Sn$ W({_U.J)g|Ƴ|ӃqeL16,yVgޜxH%lU~~_^Ƒ>ع* ]`uޚrB!뢭9Qai߇P 4.h%0*#V?iꘁ wVQډJ)Ч 45;ME倨{ 0V$I~yFx_lmG;߽]mֹZ!::)OwLEi'heø\ӯ'}}}H_+o$;/ ) qn>K.Ңɹeb=63٫؆d-vT|K2.u)&i ]7`4(,%V$.+rB)ʾBOAqU^8oh_cz'4})ϩ[b({u>&3Ft Zn)_S"mF^9^ ƦZ9=˟}iS)]C_s@\K%ܑ<,4^چ;k' Bq3Iz0Y.&{/~I WKm[lF?ԍU<±"Ǻa 9LeO\>\)j#۰s<hht#Jns–z :KchLҌDYcmy{䛊|%ǘBxMeeṍew?4{rvB༌&aBНwBiGQ+P %ܔʕSbh=)T/3`Ԫ4z0fbFgo4+u^fanB K1p"͊l+sг҃$5mNZCy3)~V}5JÒ0Ir:a>VsV6و>wb,m eV*9@eA˂66xcNh#54*VzŖlH*=֧H r c@ `۟wLo"ߺBH$ʺG,t,q2vLrbTBOޮ=qD?1ОAm>>4B׏Pˑlڷ&G)9Ʊ٬~ i.^[J)y[emq R/ֆf* p{FBxyqռVv}ϣeEeo蟣+3IM{ssҶ!/& e^lO{ws13_l%, :5nT<;`g=FmhVxǾ[y7aeބ"yf\KU0i3ڙ[@=۔ fK)j;s44rY99k:t2nϔvO Uj \+ 3c/ ${iԾ[m IGٸ36M48u[(!'e̿LLl&6&3Hn ė]82oeB!|8Łwy9iw+Z"=ߋYTfD% c۴"Ү/B3'<s\}Z6"|(8;W|Ɋ]9*q :pńᤛ(ڂ_: QvH,q0n΍>_J% IDATg˹oL+_]B!7}\uU#bu1PR5=޾08 ]hn?睈 UHV= RXaCisƴES `Ay ĕgsO}f+#ۼϓ@l׾n{e$OՅxv"Ӊ1P=Tʅ4_B!D U7#p,~}ud^?Z\ۡ5r}#A4sP @GQ֟VQz,copU \đDkt)Ʀy~G#~`N*Ygcoރ#y_u[ / 8W>O&/=2<pSnBq2p8n)nS?͹DRIG>Rދ4H%Pp<7FByd|E36'F҆{?64a%<:=%fpIwKwvBrHb-lD$5ˈ=L^;~{]T\Ɔȯe0BH޺Bi %v]zzYO8=58^45=D;X3pYkDt9V\x]y GSي A"V+O~B* ||uAHxt fYWGne*_GKX=ۉB'*lˡB!M!e(吋IB*㭔}|D5z?+>:NuuU9*oU˦*c?ӂ թV "4U6yӣ׸*7bz s,A>('xOď uC[&>V CI=Y^)hv'{:slU.\M fЙRԒB!Ddk_z/x U=ڶ >')=;` 3,? ++;o"_+ZyVpyzN v`yB:p]'! %`](=~2౳^c={Q!٣~$zG]%gӝN:Rg';Q!>sͭ B!I-B!D5[!Bj B!@o!B!B!BT B!x !BQ $B!H-B!D5[!Bj`:B!8yfCAA111Ѻuk"""Ns B!Dڱck׮gϞtng߾}̟?;ӜSQdB!D`͌5 `ٰl4lؐQFi&v]gu.ҫ>mqNy}q^twZ\rr \B sK^tuX0ݓYgOٝmB!pŬ^b۱X,XVgmZX,vȪU()) prn77vZO/ʢݸ2?;.G1h O9&=p;x{q2>˵CѹGz_2OGOM>kS>Ԥgo&pujO-#@mRh'N޹f^_Ldf2Ѣc+,IDTWvU!M֭6 jFΝٴi]t9Gw/a7C%'oxeuq#0Yћ}($x=/~OIӤ0ԑoa O~ %BLqSOo 6^f>۞ *Ϟ!gLҰZL{cƍ'xkfN.`T_{%IdXZN.IeSf\B'kc_Q.܋fIf5s}VDK98JKimp\ :^DGfܾ\Ufr˃rAG-<9[c[ [4k)^5F=Wt ؑqNz~ߙCxZ/F_ёf-dEqKR:-GCED7ʰM*t{ZYlC!Z3.~wٍϝ 7uLXN.Ԍf*BRXXhth4+.X-Jp{_ӏb岛yhE4Ԡ`9YZtbUoe3c /i1L|5] PV(OAsh͸|6/`~,.]*7͚MY|?͋ 6z$ S3rs؂Kc@ɣ<8o/6⍼ػ,WKn o$"[2k ;&3O ̘p?}$& Hdop| voH6)dǪOy^!g͌{xvU1)kIflI34u^I\7oJο.L8s9M{oJy<*ig㮽|V\$n=@F(;5~Qxru!B)V+v=?tH 1w4>3όgiosU>%kD7FC>vӗ_OKx*7Zƺ+Xr+g~x'xt /[\?wMҹ?<9. :Ԍ}mWlYAјifM@L~qEhYC c,~/K /¢]s<:f{/7nRw.(RTgϾՏ4e'c Gm-f<~:(6<ÌkD]ڌ/:Q<Z¾6vⱷ^_ G>3挩=Sc,ChfNQ"ԶHB!jv_@)))iDDD~W\qUz`3Xj12Hsc&|781/:v&7Ab[xJϦ3L !,: ,N؁mb2\g(\SpI!F 9. 1^~y6BRA:j%g{y8rQpGM=N(ÔҟGÖ[?r LnΘky~T7!Y,!$k+FxLrSv;{$~2۪Pu!BTՋ5kPZZJݺuUVJQPPΝ;ȠO>QEV|9pj=̙6w-Nސғ1]#lz4IXxG4щڦλs2nxb؋ }Xћ|}/LJ <8 x` w\A|B N]c8O]?k5EǬZD/3=%;x HH c.}JzS&q;1u #5$穏gٻ0ۙz܆)^0wN|fGX}q:יx^-1fϼ4u&u^b3g/K=bɕB!LrssHHHI&iӆ )b ``y{8~¨u1Pr'!B|tqNCo!BSD:u+WTcNN= B!isׁԌ_B!,'B!@o!B!B!BT B!x !BQ $B!Ըxb u(aUSY<-tFL֠3*jPיRխj<1:*¢BսQQQU!|q+l! @{ۻ)ȍjPӝ!BCTx !Bq6[!BjPx !B銋ټy3{졠hݺ59t[Q FZ5 @,;3B&aw?h!`PŤ9uʾ L <6(Hc+ - y\FqQ _.2" &!9# ͓{< փG0/e-S|1J"VTr}'Rn6철cW:E6K]g:=[nϱlg䜂\9lڴnݺaقitܙM6ѥK363]t?lʧ_8Eb>nIݝl9t[6sM~O蔩w%D*; uM㝮%L0[u:4❎L$]!LDa/2kLaµDy5j4ń^qtelu1^)}& dcr4dH;<24-#X YAió;[FQ\3ocUig-,k3Y:'}\&?gO^s#H2ٽ#7fw 4m*5C0Xyx&$yɌپ-ŁauRxkw>:*,4>}2U$uv23rxsi6}=9L@LAUc8ّ˖\R([`0ӻ]7d0l&ْKؖѦk=(enE y \EBJ/>-:S!Ͱ`0$%y {1'7FG{Xm+0ڞ-.5дmmTe;03u ar>.NDA -8owru~j019ĤhQPٸd6 7q54bb̤h&#Soas eGZ L9ۇ`9DdbcIYy* @rW\p- ,ܲ<1Zm@܃n9=pGJ/)$_:zaKᎶD/’Rjyhm3eGsUpMabxSŢ/3c[T1ofӰؓkeϡ |cȋgp]]9zt*ڭRћux}.'(R/֝l2ߺMI\O(ΞC+Up$~:FBfa F6f0[ͷܿª,ٟ';̙{U-DQv6l(D$6kGCXYTŽc(1"$y]Tysխ\=yˎk^d].7uZY_qǁm 'ncOQ XK9F45}fen'UT'dž"hm ta͵,S'LM6W!n{Ϗfc=-*0A((EG>f`JKlt.Ua 7.u}˅B ʮc;!2p~ O8U!&&Rf3px" 7 BF׾dh6hpY';ON$ \4&Ю_o:R3`4jiFʞ~]:u = ӓSgkI_pS4:2˼,uBg!r^K"9_-${~q`|q>Wz{Ɓ.BSx_8KٽV ML1O']V1XWEj E8Lm'#t|9.T4 ci(7eIem-|<;N|ϲ s:恴0b4()E*-j3`~a/r1Na$apmSC//o;Y*--{ҦM u{qa~ `0b!?X'_siHNX h>?X/Mqdp+'?nS:Q"cOi3_8d^FBh#?*,K t["쳇| eahLJѪqQc{%9q5DErq8ΫNj)VvYYloXZ%ѬQCGQ+oʬ tk":D̑&"N #yntaTbݖ<=j2i bM$E*SW;pI)q4 6υ99o/9UpW֔}+d,='wxnŠos~8S."sD0'*5]dS;ϴjf:׋$N-͙n-p:s9^s~7KkY&.\ <<777z=Orr2z777¸x"իW/XPK۷Ö {NI7?nᠮBvkPPYu6+е{.*ֻп @hvc_>G&r5<(6CG~fweNeSL%u<9v2A8P!_ t $oT&@:_JvxHbxfޅ+}!OxҍE>;ŜA V>8̙|o#_oҏ';eJ|5sƣҢ]YZ5ȁ#/- "GFeÛ܎Ř̀# +}Ed~υɮmчѽ]:)$'s>2SZxN10eCh֘ט2KATv[h%u؝g?wdA7GGG6mIOO'005ߪę3g8{,͛7/|nю0_[o=Uvw6qk\E54>3жcm6IB!m[q__ZgxW 7m "EC )BF\\EDd))I AA( C%xH&p0?.+ :@kBq"&6Tϙsg,Ѿm?Ngs-YcCc7򩀛5K/xsy;mȄBa""#$C^^T S$񾍅o[ '!z;OMñ˩b &BQ,RRS$S^^V)oxxx:FFP hB!2O IQ4(B!B\l$?WسaHRxb%\܏rqB!E>{fg5.EȳֳL4->(B!v֜4{Sezsz)xU!EAUUˋ)nk8Mqt[!x{[\]7KĨleȬp$SB!}'$X^63~u[L?GL&zɘbi϶KMB!@Ѡ^].\DBB^^^-S>L_zur%t#@!664?ΊB!D6^OJƽ8r=]0~!Re0?YZ:8 %B!~>zSf {do8V uvGl놄;v we'R-BalȌ?͉wN1^hSN>Mn0 * ENeV!B{a3ykNZ-:pHi村ѣGի~$&&-o!B"oS<'OԼ,ʡt Ttʎ/ 'qˆMD^;Z fqz.H\$֓R?86L|3>Ѷ}}8k_\8vkexrTVFF:ttR""QwwB.#B!PLNs")TGŒ$:c=0Yږ"&PS9}-ߝpcb}^RHlK㧞>n?Kz}8]kҹ@؁[ddd`4:t(HJJ&))x$B![Ye& !L)$ 4sH8Ɯ9ƍGP-$o`W+$@Mȟ~=+mtHiܵYiwj>>X;Tl@Aie_o4z<||tB!z(**gШQC ddd0p@bbb8|0:DGn/Ba/$.1!**(ի...0a6l@5/D.޼v[sҼP+_Qm$B!E`k#Ns.wrrɩHm4B!(g(D\K~IB! 00.Imgx%޷!Bˀl󤥥Y;Q@NNNb2`2JoIB!d2GP`)Ql6IFFF-B!D! k |=B!H-B!D [!B`ۉw5nS9mxf>],mxgr"EI{Բ) T=!†ŕzz͘GT.xP9B8+[b`e rm̴M5yꊥK1ΛHÒOBq O\}b|J.,!( z ήYr*;ޛ~^֜j(R֤BDEGAJjCBP`~(R3~] fI\3)8!쐂ga}?OZã_b~%oMfg5޷LadK?0qy݋t[^_3yj]cVLuK0sI=E;z9V]Ch5 چ mc~s7̉'z |+Px@w_LG=c۟e掹/B\Kv8br Kx,α衱XT٥}/Tj3I-w(6ZMGI^x{m mƍ*m3rpiL-0j= ,eD=`і)&>ڞ)ݻw ЗVsٻ| LEaADdjxM*q!Ioc[ft+f2R:E`Al oɽ(6CSFkE|^˵.fQ ~+7U4h|ҫ'Lɏ4@i'\Lvn0 ?}xikt-UjTsAU@QhhY[cl3=Czj^mN֋Q\Ԛ !O))xnPD!L&|}Rdkk9{Qnw_FV4 ,(F|7y-gu9}'HXBv0oEg kk Qm=c#ZLw+vW~%2ĽrT!ă>V13脰:7F-!)g1|1jw揭Pz:=xT'~L#|,Wn/o?޹/ *]@hN^9e1 (q!ȏӇ5}jj;aDyՋj֎NƧoф_ЍcIQq֩$8/.ޕ}`szuV99tW+,ę ޗ{0~?MҵbSh|dr+gn"e_#QQ% O/$FO6|d$B5GOEYYJuW6v!{{@vncޮC0Y4?~\|my,c}oӞܷɉ?mI&w{uo>mmF޽@J#9ϩ@ݏx !fK[u 2و(Y#fܥިjy[a2L|2$|!(a )UUQyK-QD˘9;8c5cd~C!}[a0[;!ȗxkB!BTI3,>g,6پ 3ߢ3>`M)(5B!*5ު Yկ"}F G绉x;~%SoB-HB!=Q0wv_*v3r|7q_;"#B!vDAl6p}y'S|wx?42-s qd:QIFHSαc=ExkeȘ~sQkա(]r$g՞)]gn| ^"Jpvp]AMQQTjݛ'֢#1M~ޗ Y8'2d vbL6SU1^!ƥϼ֗*1D/Q`Q{IB!5JM6ƿ<5u@5 cf\=ZAQIO3qLPe*d\}7E:LPKڔZdsVy+*SfBq]hӵg濴޿^i}}.X *Զ3$>Z˽\ޔ̥GGk^/B!RkdZxIP|X]_ *ɄR>Pٰn-c£v{z{VH9UzhooRZ1*LkfRQ{R IDATfER9xШwU%Wkdg|97iNҾ{!IB!/5ѱ~_܉|lGV1,xઠ !-x<|Vd $9~%rUs,S=pr(MY3xTREMN$OZnY 5߿fwZ(_iN !d[ƫj&\u\#8*s1뜳XbKZ+GxMJdHʌ*$glEēKԼ }tB!e )5ɈeCn-8/?lƃFCg"8UB1)ӻWxczSYRnǣ.^7t-^3xD{}[Go\刷I_s&(ɌoiWnʠZVﰿJMd:AK23}Xy${1]#Zq4ؗd\9 XK)dBʈs}j}+XťsUU4F Cn5kYkӣm-oPYѯkE: DAy$#yPutɚQ5cR<Ӯ5חGN?lڅ2y !^ tD)o3^ħy( :OK2N!BEGZ%0 [8֐w.Ο¦bvͶrGZ4գU+>_:BBT~;8!lnƎ9SA<ج7o YY94͝ɒ]Ǹt͉r0vp?גmITד]Ch5 چ mc~sG"[3dPLzEOSQO'aiuc.pI{Sj/YЀ\}?-坕[exf>-siwk@.s3WԣɼЀ0'3Y07FV2sgV(Դxm ׮NS+7|Nɬ F֢)lٞf±4W⇟xDN[o3Z?!#n}ܠ|r Q1KIB禹xh&V>p{z.@4[‡W3fk/烋 O/ $Zu~ޭS# |[ͣk_J]gfwiF9 ﲬEta:.\{KGKA1;-ƥpipՅmJACՔHܞ_z`&.i~(ia0>iϸ飩ٽxw8o}^e\=)b-SUw%eoUfv-LQǒQ1 eߵitj~mބ<;uSr2c ];J[qiϞ<nlj4B6kt]բhj̤zPL)*TZq.zQU3jCN rLx݆kt,HGz='2B;X/|+U\r *I|sӧVV]QO:ˉ75q`Ё֟'|G wF2?hh!(g{rJ^5Av⍃ݟyEjTrA: _|y^ W,.-I9yL>M9O_mO"q %kZQ7D_'HfYS"7;koٱ.if0FG. }(:G0_IƷ,]:M³ 6*:ߓtwT:\e1F0G6*w\ 93]D@2`]Y&l΀ С''6'r/dO K k,?/87uF]]e8Yʠ$C5|UC^qoNN\;u9YPdQӠ.ڑW?ZO[2L~sG1Iz1"e *dQn/oxKK??͑\)Zx\^:͗vRbc?[?^ f27zχm/23іBkG{>:N?/]ItMZƸEGIVAJWTV9ʙ?/{ÕLpؕgp>b(h9ߏFt-T3r4cR8@5aV?}c)cԥKk>xw#Io.˦ af *Uo؆uw 3ݗ4jx4.| ^F7Jsp,TUwf ej8]ip6WH%\w۟Ƈ6g3vLTG#R}i X{(k5=ɬUh߉Pj6fk1OOUxZ_)&*I7៕eوxC_BBV^mСC;ny;=,Fv]!C0Y4/@Ǐz /Сm9x۸ͶmݻwwnHs*&߷;/n0vr.K5B+[q__ЙWq8"}v(OP1H-DqdbuWQWEzXrZV4(z>K5B+RҮif.uj+3> P H/އ#h(u cwR&Vѳ9B®WE`FG%3>c(]6nxg]Ch2aTP6n=IP6nΏ|ݜK;/T^%J^j$on |-W9_MymFG;9ykדQoN8]I#~mބa ndZx ZFEբQ(Xbn r8Yx&·YSNbİx9S:s.c|u8>sɷ}Fv{5;Sv#gaʗIǞm ;I[!B{f5,WW0kPbʌ$z=h-yEТkE> m?FRtʪj+GF[qg Od8(Gjv`P uMQ}p*͂ŐAxf^x Q#Ï7ϯ޿ʯD&Ęڻ_Bal?O5tr ZJ&fz4J9 ETmAԂJcyZgκ [,$IhPPQs ]W*t~ FEr-19&zOu0_=ǖ=/5W2x̐5Vn>C4Jyh }wwe+?o؅0.ESpj !j&)WcK"m5~M^9UqvW4sQ>Ruw%{Pz׿¼קrQ\ٻd޶{0~?MҵbSͅn3Yr8E.>͋ygV;>Mu″pR} ֛`緌2tl'&<4f+\9ʙHmٗ3q7A!g=⭸Qw|^Ȳog2l%uht}x5û&2N,-o?f|VZZ>VF~dAk4i6lf&p RmXM`HoZW6ԴES6ܟ1WM,d X=e:)8NȈ/2`~TNl ,FSDZUyZMBb4h3G6(3?5 MQy}Bq@Or_wE낗+GW z&Q+Mj q}(B[q__ #eX&̦_7Bʽ̤cN*h!>##KFAi#T_M 8pAC6-P•m8}xr?YDr!tl/=B!b7ZnYUМi'95t63-K|38HM0ȰB!6sܫפ^y Y55W=Y'0+@Zxƞr}B!DRnjRE3_'XQ/ IDAT4e6#3sLVxH%q>{r, <= O n:uÍ\K3 y !V㭪_q}/ڴaR 5ZGB +ZZT̹_Gf3*4R-BBR4wv*hӆɈw.wM" vXnJ"Q㆗$B!(lHX'|2@0_K}n$~jzYr9є4jK12"u:Jdtcn@~%Ώ~բǫy]1fgJS+("x4, @:КRx !5׷BHgݽ4>jKޡ Sfk HCܹ_tYmS8p3O4dȄA<3y)mbNBK;y/U39c>_lF=&NwPU X[ nZͳw_ZC*h}qZJ%4c3DT^&XW%GA otҿvlc/WIB!(4EVIv=v^9S?dƽL"ޔU՗Ah33"`6p L**pYU`rfEJMnT~況ҝGN459Oj^L !AgR^pcg|\Knlx^xDﯮK{eeZ|߭@FB!쉵n#@G!X#t|a] Ebdo!B;co}GQ].$G ]4 =DH"EޥJ 7,hDW)"K %n?@rI~}f9Oڕ[!" nWI:eB!DA"s ,-BQ$xK]ȈB!D#w$sS} Y~޵77oehSUet=!2K 찘X"JQI (UUQ~_G_䫣Z~ TzB54WN}^G#xb6`cm# x( ho;'ފpsKyDɦ\_-"9(: !RN?/TcW BX77o['q"kbbcAQo;'B|,-`g+΄ݩ꤁@u[Kf?nM dP%XW [{S8s;ۢ;eopF{uSfKڭ&XBӉP={A YXmnƭ(oN|s|ğ5OTTM/s3Ɖ2 ?uj E~$bI3yMOһ1Mlll^#2"^]L&[} k=Uq6u7!,%~hාcQpXJ,a)u}\P w zk;4~(Cf C46Gʷ7KhW:u6տZHk8a5}YBGP4ZNe+}vjA-~2%:k ?&0ØҚP1j8وFS{Lgܒ1z@5qNL"X?sbP*i?B<L&nxB0gRaQiCs!7n ua[8֘Wl U6z'Xѡi^FGvlz4AF(E6^U_Φ]f ZFEM\խj.dΗU6kUƟ.o2`H:J[ %a^ >÷5~ls1zJē9z䓟qLj$BX^D2TgZ6S2kx(=ZG3~ߛI'NHHӢqP=Uަ6GO/>cEޔOX~[  7!&9+)]BQ0[i E 8]FOQ'm:3p|\OWC 4(<~qL7OP<>FUCOA!㿜eQvzti=o4~(B!>cC%>*PBBc4c !$$pC|Bdp}ln4俇&iϩC1"bNc8ɪ'>LB_{k-^ױye9~ ;=Οի7O;>]>1;\ѸW.+GaS).ݸs'8xrBgBwc+_[L'4:>z|Jƃ*-G{cfGJk6K;֘!ݾdN*T0%;r_ȶNcoWE1?o4ӉOW^ cF)/dr'g,!v2})[%SR!DI=-[۴if}?g9Pm6B&R o1i;sL\q6-ymn:uDp+h x !DAe& B+sDž(pQU;wtC=^EtDQ^Fo!>㈏Y/D9&Dt'aTR ®yȠаPΞ? @"m[o!xKs:ĈCi>t%uA1tjUhpD9;9S|EIdWIlj3)BC®rd2Z5O !BQ0ȈB!Dc I-BpUfI %I-BE2]0ɈB!DH]@}$s$B!Y$$pf9#joe& ϓxL loŧ^w_{s$,dě]ik8Wt8v(rVp3c^|+D%sEF&(>2(3."cZ0ʅnҖUtl2 Т/>ͺ3dn.D.UϗF=da}@5d߂tl1a#7M_f4|(qD)o{OFMAKNY~$as3͒OK,|Oچh}@֍M q{y0~ &>k}#^Hzlޅ>3pU-% 96u}ߧkhծzg{1SNyQ1b/mSAr!sS{7yl;d4;[Q z@uLv Y5%YϊzϮݛ3IVEcW _4_`^7;wQ57;3]|}2 0uAqCiٽm}v:g2hzvoZwr3mD_?K8+Ƒ-1sFl]ŌvN)Us~L'~Nv.H*QB96o &OG Ū5Y9?- ӠDv>LlJ{=]syCx$9:G}?1#9j7p[ 0jbSOƫ랅J PVS4/Jӣ;6s # GXWC-n 8/g\Lch]ڴ!K<}M:ҡLB9-s1Bٰ|?WlIR ˽ 8;83vEk@CeFpJx+yѰWRkx֝M6q98h5fbh_g\3M2v2\<3fsT”-Z&M!?:qn˩ 5oWLB qAn)~9EP#%kwa.Tw@ƽWзfms-Ūd>Դw:+[ֹDzBh2[nPN[[gS#3jsYEĢsFwKa6e;W1\b"o-K+SVBd0MGk3mO,V'&.oFIvzti=o4\霪#;ۮu_N2(Zʉm}( ݣҠ 1|e:y5q=ĐNK+jpЖw?n˰qT4RTyϷ*N)p{2D妭xCk?JTst/Mg"Aعx19kÐd(kYUQ5I,h;cS;+ )UkE~tnP F>%໢7/Xߎ96 wgP 8۪*軄طՑ)sYd >CY _T*F J|T8!!hBHH(dpq-H3SLXH(!!a<ȣALڔ g+'dokO*o~g `jU9/~r6ҍ[\=wG\G6ݦtGzx'̎#zzpSmkث?sDy:.bŠ`Syp4?LazDՁj,\ |cme8khIɽƁK[='r,„1Phݯ5w.CN5.$pn۟_Um+:vE2+V~j8Q^m*u;vʣzkvx5Phvl۽KZ~~w^)#ޱYޛ>>nl<>w+``8ҥGЇ׶o| ŤdO[Ϥ>=?a/Mub7X&,'g,!v2})[%udwup9湋X?nR1K޶ǵZM>~p SLcYiAuz'۫"8*?Lp p0U癢TtVh_Ƽ +flVʯKG+pWGHx?{ ~*ĘTT J'%OǞB;huXaƤGdN^μ\`6Qj8FQ+RuܷN=YGNF&#~qi b׃R쉺Rۺ 5E_A)4oʶ㈏Y/D(T>Ջ !ҤCSMt)wضQ.Q&0]%^? pxG/ᨨ+MFL#vv-ʚH3n(UHa5!EUQe$ԵrD>R56zFD;OM5I^mJ:㢁~&ٜ'LIݖ-[mڴIྟѳ[(ڶjBLv\.#E^^xp̙LvmZ$<,g-Nf4ݾk;Nsр!h FrB/Xfڤ:Z t2"<*dzBn#BQDܩG3Z?6GË$B!Ysܱ-uT_ a63Ho!B,HeE8[fn.i|-B! K9Jx !B I#ޒx<2-BQH]0D2b2ߺxi:1♧O'Ş~l9 éC"ERUE\w}ʩԱh((eq$k1Ȕ!kН9t`[*:g] {xvb6`cm# x( hoIUcW ' )k'\ݒ=w]pdv/iK\%9歛8`kc$NdMLl "(]m?wd ,án=ɥ=k{Lީ'!4xQ-}XxK܌qLC?ƏZzM]'ۦ% 450-`2Z7sπq3MK-H>jti}RFK=B<.zf3n z=&ɢm?7 } rxŇ9[hc(.ռIf MAhA5p|Pflyp 3vnIv}zWB*ӟ1~m$=S?570 *OsEmeߦ^m:eʱGd"^h4򑸠0g񶟙+w|{JQ)-s1BEk ZFEM(Fa^ >÷5~ls1nyB ,>\!aҺPiCL$ǴReߦ"ݲY-!Kz}HQN-x',&+H|Eg=~[  7k!&Wg9w^rLtJ͉%ǫ IDAT!߉Νr0ڇ LdsҞժ'>LBh}u)n <4! 48UHmm!!ĩ'wٷ}?\3? d?H[귊v{?}Wo>%!I7:J ΫXC/ ŀ=n%+|ܧ PC֘!ݾdN*T0%OXBe5&=KSrK#WM [?XLCO,vjگPî,}&!k}i!D_"ӟ^%o]#uK=B!t~n˖-6mڤYp٭gcm[zBl;sL\q6-ymn:uF­ d?G1|[!" GUUvm љO%{;{x(B$B!Yp'aTR ®yȠаPΞ? @"m[o!B,tjUјK|ə+ϿH-BQ v0& ®y2=(_NP!Bgx !BdSɫ$B!Y( WeĻ`JY$B!Y$#x !B $()G2w=;)\z J9B 7%!3y$UUS{.+)_|m?ZD.%Ѽ;t^R)MXLu[ZF*ߡR^ǖèhڊ d`cG?D5.d;wH-˫CObMO \я:jɾCز> cF OȠV=5e=7ǧ/: gpdIbm*[Ƹ&A"ؤ;/=\xi @dAm2tlO'cI.Ͳ)0?8ЮYCj6dqG&i?DKvR~ ƌԓ#z4n賬}Aj >bwN]z|q|ڧo֥x ܋OxJW#aV~DECquis'=P5qDZ}-gUL9[8o6 N=N;|Q7ޙٟ퓩mŶ2ЗS6e{,^Y;~4Fhr⹕|wp?7=cˢfkO;P*{IֵCGF9P_.$ƛ2i?G yh?ȋ9:4M!թM%Xw-;š:oqg We?_^$rǷǫtWRҶgKG?`+ q b2}kis ?_ͶbZ2dlj&P1\SC?C6@GV"G;}%UFOQ'me#%qK}a;F><*Oԙo(-**ܝqC+lFS/s',1Obzlp*ʚO1;V)W~vobQ]otQA\x/^s4~:u2y p`?Ve͸8כŗ0xY|>zhhLl}gL*` l+ԗnufCu*軄طՑ)sYd >C ^96rFNG;V}'oX0#F1;bnV#9kS()Ӈq 湻;4/~3cGt~i=ڨ`n5QyB_v3iqBB-ړJ}?VEt4'rg-Le ;=ΟU+'܋S#p}lii85^,[d: 0 !D8sI~ 6? vĊ(~Ԇ '*֫MOS(wc?OgYz%?=Z?n݋S4h4*1F4xلz@NTbL|4@E$Ʒsr1'@ ZWjvx扣%cU6'ހƭ37,glޏʩ/5Ě])K։?XQpVnNe=i?c +~p,M-WGHY g~α(ۇvsXԞ_M]YLsCT)F{C.lWE1?o4KLGD:>z|Jƃ*-$z#KQ29|ß,R I7<̖Nx({:bCfI 'ӱ*G鿹_%K7d*;oc\E8Uo_hZSEA|XU1%Ly,7K;)3R#q?>:SZV1?Ff3"SMR-\^kB+96bՏҬG"Ư4b.3o~|B<;l6;gA_gWL_QwFJ:)U2f|FqG^Ƨ9Em֦$ bO\?92xv9+1sn>%HTEۍy@ѹ} xҍ;1oF[ʷ)gㄭU1,ZEL)o 7-5G˺yaC^+kpLZ>HeI2gΜBQxzzf̵ײ^fnwk/sWBߙT',,B5ҹR9Ұ[/ㄚl:8ޫDӕhI?%ؼ2u˺ᠳIh3N3ߞL('KS?KRuCccjqՂB ZYX3z{ğ=+g Wg 3JJ!BB!SMb.N`zbcS>Z5ʶ%NW.,_Ř蜋SrmM5Q*A!ݸ|5cġs)N $]Ъ]&MB]/OX-.e[3jJ_jhi]Fߘ}+coυ[8p1 xs_5qɈinSYiޭ5``)ť6oYP6>dl`Ԡ 7ܐoN@M y YRg6r)5۲eM6i>zv@b%s^!B<۲2}#ivΓp>75 &&|֖c'QFMz}nߵ[N@@~~~݀hN7pͽ1mʕٜ!D( St)uB& tD"7Ih0UU %$45}됄\N&ݝz=૝s睜\k]Ϡk]\2yڝ+Smi.c6s\uBg[ٕtJD-SBН;y!! :]`T(^Lo!D+QX^ (F%.xd;:5}|*aBd(yt)trU!DĻ`9ibyB!CH]@ȈB!D`kk!ڀ$( Z|xuB!xNd'歛8`kc$NdMLl "(]mĻO->H! {oC%>17e2<٦S 2^ ^kS_mi~}=1cf^g/zDpwAY faY666xBd2Y|xӪyC!"M& w7wxh:Afx,vKB!;^!H> !Bax !Bax !Bax !Bax !Bax !Bax !Bax !Bax !Bax !Bax !Bax !Bax !Bax !Bax !Bax !Bax !Bax !BaxϳsjO᷉s@o@9kLi"$NL9!B!r嚲O5\.U;K/w?6a4uL|^D1^@B!eĻ2|QқUgyB!xX0NCd ZM/O?6JEγd#$,?_%5g8q&+ekfЄ4wx> v˜F*z ([5[&Ók #9'oaY=3Ӊ c[pޛj-0~h{;hngZB!ijɂ'Wekh1u]T 䪮,Mtu(.4?|޶>Gbh;|< jxuhƏF)|7[C} cĥGI ˧Vz9!B!)b !oi.Y02m[>ǗO\!k_NcΛXpF/M]t}4%c/uQ^Dھ,FwkU+8pv J)}J35d#\v5:;U!BL814zbO)6/ljAC&dq\  WKBj{:q҈#+' nَL+B! 1Xbc> h+ 7?oDVUZͰj(@TԴsá \g5&֥ո.ޮh^Eތ'G؅B!s#$^T׿cl[Ueތ|>c*lzz'],1'+S\;z|M9z OP{oVӃ 6hYs9wF3)3u E/9k$B!Ε6iMʸp]|sJKjYX} #S'mbmGYi'ͻx:Fu1kkOXp9_^/+cVKt?(|7˙VseB!.lblӦMzNTB!Bwmui_7 0$> o!B!qx !Bax !Bax !Bax !Bax !Bax !Bax !Bax !Bax !Bax !Bax !Bax !Bax !Bax !Bax !r)U9#B!) j5?qXv =%mQr헗P}ѥ^/}C[;Rc}ضu 嬳Y)OLGl'b89}wFűSF؄G_ `A+[K>ޑ ަlv8cyӏ ~"kIE%QVzB]z7VL}BJC6/%㕍= 7!a >[IwT-3V/솛p*w/p7K΅]rr!P^cQ Vzl={483-OْϿ2Ƶ?{L;Q.aj>aҪ!5Չ+<㑼Ҽ5}s 2c5Kq G]ૹCܮ)5}JZ7khJ YǪ(Kyib? dp=u$vh.+W:m0qm {ѭP~CF>i߼w;8y?Yp BL}5#xPEWUc J"Us;1]9MiIA5p|0flĸpW]Ԩp{YU}=dfԡ|֚13FP+:[]4huT6բg,G?ʜl`[z!,>!;3usbf~ۇPZfmf 3ztMO9$#^LGP4ڄ~h}ڗk0g=8 |G&φZ?M!R?oo'`e!2Klx={5tŭg:e4օMR䣯Ո#Kw>'Ckv; ^ˉ'yjŚg2"R㝩VvIW[s106{pyؒAU@QhhS8Mv vt_ܭxcd ƼbN  x%ݳwmJ @Vc&&ƈɓ O3>*}ST;-N/PP*ʤhQ[ ۝mCLeŇ_p9c%Bt޼.Rt6XaDs^gg_`KEd} ǝ(AL`xΙpU,޼LVDegka&u:3`hڕKayM"}SG}j6;=vR 9oL!qLm&Y1N+6xb6dټf옕Z3څkPPQSiB[.j0N0Df L0z:ɕżdnMoc1dkhpЖe4Hb~Q!ɕj<BBB Í+ܵ~cw*W|2C6ҍ[\=wGz) =YWIr! kO*o~g `ۮ? NoH[FW5׍Y|?Oy/LJ4ӻA_,_w1=Ʀ{n %DbŠ`Syp4?0c V s\J43Bo]۝I)V%N\-ar6&=KSr #z/g].\ΖYcE0]ɀxY͉}8/u(9%A!"IϜ;~+d}]aqB!r$cؾl7#Չ3yNI|kP!=xgg/xo1FFn^Eq~l̨c]s̙[<1ϡjxr5(y !D w>pl]È1bWҿmXsu,ǻ-KId tgO9o7#D> sx4D<~ㅕtl߄d#9HѧX6C`d QUwޚCw3)QvhkAzj՝>H,ƑF'( z0ݯ4ۆeN"{7g>?cL,QQUx16bY4voMMu]YCj%]&3 G8_ ǭk),-)W^Z~1Gr$6-g0}^)z̡4s(3/2|b|˸`̱?L|uv%[&+K'yHFGݺEIePg2!,Bϱ}.FGԃ()D`X٢,7g WjwBԟkCiЦԣpS0 Tڸɫbr5Xa_ 77W<ź/35_8w|]SѻI+F1U9 -Jttk_3ߙw}fg})Tw<#P9XmF2W_98} s❹lu,0)7a]M̜ }g90xi5tbpΨK#%USغ?Sh-:3/,%oi ~eḳR8]ށ ‹KW W7E'{=#HJ}XZvlk0t׮O{}̠٤l<(g޸ײ¼Jc^v3SxR`q c hfdP_56SJv2&oσ 9MTm@aMiQ5kWìl֥a˯x͝ЎW!m:A/2<̻gG޶b~#޼VVcthLzMD@!בRtɵ-aqFu^ew8=scs|"U_wZcK *N5Qe|Ȍ)F66wtC8Ȏ;9 Gw^ŏ'bku8'O[@fFW[fFwkcTܶM!IrdPb.*,Dn?)R*G_M_.K{ײd\K괿7ܮ'$6oݾ>X؉clRsFfcތm֛1p lɮp) fCF8Nr'SF*zb9{0ƻJZF )z\»pusaS`ޤ6f`Tp+Փ<Q`mUp~ XK\GCԉ$bC {# ٣&B&_m@E~#@v3zb]1c­ڈ S.9M#䴙Es`'>wuk3R>: ۦ:!DzσQY?ٓ=W}L VgOyr./ܢס3]%r^(:-ـ!(Iz]%Tn.ɶ%;AҡH$ocgK놥N;nwX3eێ_"VWs2L鄇EGUrs;0^ZT܋׶RU<>H:es^kzWƭ UvƝa*|Ŏ?p#6~?v%V9(iNI"))\9{USe|;A#0 SKD'$I^BmJӒɖaȈ `Ar|7Tȍ iI8g^oN赛܌8/?~y MtY\$>#m!]"煂ȨӢ]86AI2 b} ]0n;-Cq4 q/P8g9kVybXMz0mkLݿ*fTq_:/N~LX7$w+YQ;Q{ke+̊"/y46j1yp^K4}UF8R x-H;?dͫҬ'˶z{xAz o%ۿxe9Tq%h_XM0lOCunG#ۄK4cX"*IIL\8zb& XA ˷^-1?6=/CFqYԢ@ǴJ^un`+r^x)#;btQ&8'ň_5P;;vPݻ=ěoz@w3$6~13ڦQE#˗/x/5ȫD9X232ZdB1Ͽ=%>C~K%}ʨG*һG.@@P*r=}* GxWBn.ϯ0AAA(}b   Qx  B9CMAʓy'֩A*(A(52K2zV+Iwp~" j"De(+eGiD1ޕPx5>Mx赊ExA=id}*qA*(+Z=`_(r49(/<qAD `&-%f@Q| isP>qA$ g|>5jب8FNfk {X8fԴa4lYtVnf(͋侟C7bTMv^L cؚY5ߤP|$oY8VV|ۑwR~0 Z&Jj:b$C[/] ǘxBYBډh/.Ul_9->-P1Dw *+o<2T@~oV%>&Ԭ_Kӫ;kޘo*֘Ec)-N [)U2 dtasT,CLz79O2ߜ&uU 0.A'F%%KPJ:25HddkQU@>=z [B g3GPDȯRrtVchlDȎ_Vڱ~}232Zd]U_Wݟ5~GV 7ot{S elmm'Rl;:-{2^ a]'/AIxUհh6i(eF CCdT*k~MJׯE@?fϿ{1=JWrz{ْaƂѠV<_HdJԷjBINUyńJ-7RYs4 *l%-l P5\Lf+d{n*yOU1ZyY*ro"5h[Y0Ž1:8SE%Z*p)Gx TQxWtZ>Y2C#%wS2IKo.\AahHV 013b&St)bU=M`,JŴş*bC߅+{n4uܷ3r}EӶu%'1hrL^_2׶$a.r0Wߪ{#`{4[$)hJ F%pɘ}j#q2I;Viƍ8IWJXWʕXMd.:|ˉl=Dtܫ3 $q]+ǵK-&Ud;\Qеk5ftW3n&wM-ٿ3%JXI=¶GzD _U+ǹST-e?A\f<CfeWϪawdAbIrusaNZN\tx:ܧjeǦ[6 Gm+8G3h^ȐkMa6yЦu뷠cFX=\oj{kA?8$_&^8էn[&GL\@P ߔAIЪ5d齃(mbؖxh8 2#_w7@JT:srPIGb͑REp5"eq,Lcg蛫ޛտ\i%xcYDgf6irѭH%ee_"'*W1vP]j4\"2)_ :M 96E$x T=;vPݻ=ěoz@w3$6~13ڦQő{uG2mRJ}e%^x *29Ǟ4e2}^-QB9( eGN͸˵ ʚ |lڕs\'K&QVȩ|p>~-&šMױlъVϸ87Aչ\Ξӭ+=v="#[_T 9IfߝuTGY[YtI4 gPU.KS% #п{MAqvbUd^ŬﶶY^|Bkl }^;n=xg*~ DWQA=)<w)IOOfZf̍d2jլX X srɺVE:WCD2Ӳ`Xn}ϋ wq:*}Յܳ!\~h3 ԡx1Kzc-,[dgܠ65%ti7dgY.ĸFF̜ͨVV33XdJK$j-m(Ӧz*s. {~7G/s[\:)^4juTbsZwx%ϼOi|o^nK:cD@j IlyKYhoTw{mleɘ5  l=ϜS$Ю9.'@!1w5)&?U?Fi~%Q~9vU9wȔ 0l\kkeEwnLL>' ?6XXXћ>r#>Ÿk~Td2y4:QPOJ{\aϯ\oЛz&_<*rř Hxߎ|?ؼcggԵ%ch$'+83XXp=,!:4ڜ`%IʾCJbfV~4c:l_X=o'W%i;C8?68 Z@Ʊ>biL:@'/|'[ʺ-ď3x,0l9y5An}I9+7Ԁ6'~IYF7K[,d:RCCrNj^4?r觽~#4D749 {d\Olgh꿣q ]'fxZOP&6{YS~9Oy[F^Ş1 Yp5K*̉wﷳgn ̂M :V|:s]afN3Hi~EmĨşv+<_yQs94(<ҷ}_AxR֥s7>t:}:Nͅ;i9q ^Orv8ֲGbneF`&];K7ݠ*mݛףK 0-pjꌃ.=<sJաKM27{cZ2A) Y5ͺvEjԬ] 39 P@&CPP(8)W~C{]j̬ [k`*)F`ӥ35 m`-vvd[۽X0{wC3gkJh$&*塋 Yv-5w:C;6^hHy7׾1u68^%A y7#6vUQUOz^ *yj8 r9*5 KG\zn}m#èΫֽG{NtLzOPk8C!7AGbIsusa#X;gޓߢA gn%sV2NT IҲb$Z6xɔ&(qKfd]wc0tl$w2hۤbO  ;F|KѝWXZ&ɓ2Ֆ:DxrGڒf>[+?epiZlw|QzҦǐ$92l3s@4NF:N69ҤFx#SZC1w&;q }M`#pl֛z3pNa4.y^^Axވ»Inm^zlzA\\3use!7&(/ʸ9#piϓȉDܞV(Uz'>6#IĆr#C`P5Yr7j+ʰh֏9~H#Tzݺ, xՄG";t)|kmS?x ۭ0Bυ[9y/4p\;\.[ &ʺLܶQu_&c.DzσQY?ٓ=W=mDnސ~oufk (u2LW8)<CMJ5bc)_ߒ$q+6++wusaH- F"%!m~;\Z7,mx@E̕H32I avB;+*rs;0^): ,D2ӓHV>4z^TAb,Zӻ4nhPXKEnw5nR2IIɤjQ%-3D)] r[w;h4婢ryo4cyl I$fWTxa͔l;~[qD_qG#=溔o#BnIN6f|wBfy~c0nlRygz`)=ޥsEF9¸0n;-Cq4 qr,94oE-L{Gnu/f $hDVk=vy{M@E=^UzgHE׻AޫyBBBT@GC] <^`"A1ނ  PD-  @ 5eމu(&#A[AAʁ(AA» '^ Vѡ/( PD]\ `?gD#; P6D]\9A=LZ4+[KeʍAAA(;$ g|>5jب8FNfuʁAAA([.ALHnL >:c?d~lY'8cۻM=>]tu{/VEƔRpu2_3+ @ xpaѫn^}  <-QxW")~Pu7F:'u[de±/ZGd0#5,=# _e@^L3N#Oʡr觽b0ʦ|sk7x##*+A F(쯫c sP j$݃kpzzugҁǞ٪}~CilX&<3,+IDtta`fm)rC,mm$8Ĭ]Ub] 2%C6 1 /x#7˥>>]qw@K!d7ֱ',qogvZs38^_KD݆֒2m7AxֈW 4vpN]KZR:FJrr\<bPҬCc,9qq:P_&e7t= V&t|Bxw+{gJf>]tĥ;T{/6nf0GPJ3Fce{vrM 8G,]G8C|1﷗u[)f5_q~s/0<'nVbW]afN3Hi4ܜ=F2wVwçG6;^YYt>of϶5,~=bgICx2b*|io͂c]WrrpjbqqΜ<ƚz.A뉵,4^}ZIDo`$hK{AwrusaNZN\tx:ܧjeǦ[6 GӰeb.øf컙]+WhS>vХl<(g޸ײ¼Jc^v3z65:5n@AqUV/7Gm<aīA5e(n۵dG0}'S kuH:ըYfr;t_uݿItlFJ& #Nmx7u e5:NfԩהoyHMTJ~ա=̦3;o24nt+E 3ls!~~Sn3C ƅ+Ûmɛ?lNpV66r VzlQIERa ]O|IlȻ}}j;.K{ײd\K~-RQ']#QQv_\W},(,Li:$>^i{}TO4Ƃ:6Qv;Z}1 eIޕ }Fnη 2&u1[7g.J^ȭݙD Lum30O o ;yN$jX5P[UtU|wgoXyѽJ{ؤpb2چ%-ΓlӚZ_e#>38~'{ NQ \617vs,;NM_w_=2+x>Unʑ!!=9Lύ·Qf!'r{j[A&7* W7dے h$R淍u'lY#L)ۻv5S%"o}oN?M(ҁ/go;gȾsm~ e} 2׭` Sa]^T%2o\˭8k!^yP_.<n&+AҢ$idˌ0QJdąqtW0ި^væc#.-}U]t+],^J$3=dUv답,8^|}",bDIRxKڕ: AɈ.JͅqsaݜoڏAG5m(۔M‘>]szo҃m[P6tDŽŋ>xIr2uZG=c}&n|LϚzCjK/dd1ŮNcO4cX"*IIL\82?aV,<54܎F o/YnR6_Ivԭ&S}QR sSnי=gYuߍLoiRfۡ/7lB՗O"/CFqYԢ@ǴGDšܱcwE.x!|.v%agm9 6*:s^ _er`H]=˗/x/5ȫD{syRσ=%>Cӣ"ݣz (^{9OHHޞ Ⱦzo=\\ _aTܨ#Pdw`):R&ټ 6/P  Qx LtUwI&7[?dUFN"OAA' oR2.=>oE\!ᗕ|0aIj̪}>rB݂  < Qx ̢-_T`T=mW` PF;N  Kϙ~+: oRFA Tk  w%zOfzC^P"A»3~G(w"Al»r>{h:' 2 FK|L"=YN]Ww_H*, wDHcՑP r~PƢR*$u d?e`ggbK[YaUSEeHZէѱ 8Ѭ'Z˄*?3oY2bׄWH4-ezȔvAxЩ@}63yx Lw<"/ݠUrs4էCvAsh2#SuV@^H #s5-f[c^L5>GmJ뚬iI\͵=k)Y)?%sn&NTk)\m&S(ԩ*︘PUFT*kpADU.9yqVb֮*1.c͘{mmG S:Ҵp|>D]CԱ^BͱĹ7}67y~۞PB+i}}N |CXIw>o-w2O ZaSSNGjX{Iv?Lkt`ٌje=UNoϜS$Ю9./ޙKcqƽL =vD% eToZY!v' 52~ߙm(w\dXȑLIoF]_c$^?$`p*mv+Gv05@~=..s\v}\AOjTtZҒ14RKLD_p,l,АfcimΉ0v07WbonMTaJoK\$#R:c.oۄPIt|w^gQ=d^sG Z_̌5sKzS7Ҹp+ܼ .2%v]bR\vݴ 3c%zKr?x2b*|io͂AtӃ 6ro75 K'Ļ[?WR7nq~ 7c ^2ˮ+9e85 [88gNcMǒR5ظlkA)鳎=ۗ1V5XB㕛ӰHJu&p|,F@R%i; IDATC8?68 ZФ FS <~*0ߎZ[\O=(lxyLgwQ]3zW{qcS}u6m؊܎b Bq»0vp|'-'.: \<AR]^ZhвcS̭\̄iز~ + 7.F;5ڰ8>%,mgdpv.)*~?FJjI\s$H5ie2Sj$qX*Ҵdg,eYCiuee`7׾1u68^%A @!בRtɵ-N?ƃr|{-+̫4Uow8s +iֵ#-TfjB2rBI>7ݠ*mݛףK 0ʼn,4^e5:NfԩהoyHMTb@nSSg,,pt䙞X ԓTEm^i]8o)vbS~w~?m&$#Cr@=I/tQA(&1Ԥ0 oѠ3 s+'p$iv}1F-oTG@@4[ )Sа-,hh <Η0yv$-BQqխqf0;7\1H# ~+#]bezȔFCv=]'#@NCg4Qe|H )Fj:)Jt@oEmgi޵,3c_VXCF8Nr'Smjl^3O\YNcPzVu<|\%Ƕdfuf@|]둩z‘Y_i6}}_ˁ_2i5ɍ*НvT' Jͅ>#X7[Ny:XژajnR­3VO_԰ǧǰ &,3揲/v$$diNZmjJk _1 BCV7ؕZܫw>Je#>38~'{ &6(2qfFt?"oW(GTN)kԨxCQ \61(ոs./7g2&õVɮտ!{ٗS$B׏-f;/~ǔ]†j}~?hv+>mcU'?6ACM* W7dے h$R淍uR[cIG̬qoiSq>I*I5(6ߎ6GCLI`s}Kb_Z=+jLN5#TdtO+R9]V?05G9SZIMܜL3K9Ov>I*J$ۻv5S%"o}oN?ǝ">X8bKd'*I}ǫELDF\Gw7es%LCX2݆J2s}=S2rĵQgcg&EIA);!֪&}Em}jUоQբt- YlNdHY:{ܓsr.9'S')'uUuyyy4s;YoHʲj]fäLGfKll܃[\BF+9(O %ٶK ㌛?JIņ+8#r-"Bf:^dx܎>&%0FPs[l\H\W'%U*~A¥;-%2f,~GPEAJR7"v/\ɕU>J}#8CVW:3u$ZVz2ldײx&fchِ-Udo?c0~F yc @Upf>|jpYЪkE=_ [6c¨os=&q`כؿ geb:uiӍsPR N?p!BP09Kݯ0V* u}h98s0 ( !Dnw^S;qaJ<0%>nev׋ Ħ]b;`]P)EU t0el=ꟹ·YW d9S/KH,M>R%\똢ƞ'EedDE{зدeݷ"w89\Чg G^N;odϿt,9(B%+ʉ6T "Bޢ\(Уf6\L#B!(D mF*kvȻ1#7x8!ij0]; !xiI,B!xV!B!ʀP>pYLŐE$B'wsb07ä%cG9A!tH]\ƃLl&fLZ:=|eFrP!(=RxWW {fzLFFue:]v<<!g 9XL,H]z?f{N%#]Mjr( F$=Ð]Gs^;`ۅ 6gL¦g!g {l9ikf:ڒ'2?\wK&Gc/hG(OAݦsy\(<*Y!D ?l)3HIJCՒѢ"2<Rr"klf4mӸ1\::ƅ_zwZ8 ]"u cGܲUiг[P:W9绞%s i=sJ+JRi`QXwB!^&Rx?AfyNAIJRNŦP("2,T+vɖ%;y}\eк| 灺uiҦEUrFO^CWjP.`EF4~o 7OI\i*AFV !xVr}c>R"-5JR";KC围zUDf}:}k]#3zZK4)| ێN w5|71,d:z8`1w[)Og8SlB/.$̗dv_rt־nk!#%qaI <=YMgh;`?x}eF~f1ĩKVyX̱4W9=ݞPmOnEɈrcĵ?p#MoV):mEI>[L9^ ޸C`g@g츐3+$OesHzwy=2c\>o;&!/ Y.Gbܭ|f*z$'ǝQ ݸJOVm`PM{|B[5s?6}.q1 M G?'}tvͨ[JHmJ8YՇ)*ڴXگcu-gW89vޞ/3[O7CP(UƒGS6d`<jS#2|1'ѢfZ?k{ҍcƢt">ȟeKNy^ KES,W}@kTǟ|]'/a}t屔qU9q'9l3=gM&xk=?ѸZ,6/s7]M)!oJC:e6Lʷ,Z߮J )W0}Ҿ(MB!*!)ˑ5czAB\2A_G tzܼz6[hطї)'~Y7.̷v>mڟifY7cL7ޙ (F4ji.XfG<JT*((U*TGLEN?u1f<19CfUN,9U4wY Yy8݌f0AN{mE3Lv[.4i:-B,8!S[}u)9.L7bPl܎pzZ :^PpV|ڒNr'R J2 {W0}ALej#WBG3;k>×xQZĬ:q:jþ}x+G}Ŵ:X1{Wՠ !V6LK}e3,D' J*7SY˿G Z ;!X%իL1?::6Um(BJr^VXsRo(~Ut{u0|KILp}': 35?J&1J`V#DYB5C*XOjhݫd mQ6e;]IBY`v"Kn'jze"jr@Q@HlӢh@W]ETcB"eG<֒BdD1PUxrPZ9IKUA}!|=yyoKk:fnO?sJ=R=Zѥfo$BI]AY>5ޠՐ%>^^L\<kۦE|\ ŭ /X~CiaVyi]Ʈ/s#*ػҤv%ȤdbY[{ INcd6]!9!fKllQ_i5L ŦJ3F:7y M4_-烹7'OrхbϹ%d}.FYޡY~/+FrPBB kIU@ϒn"?#yPHo.4J#UN?DPZQB٫l-y& {+;kܖfے/;b'3n+z PMyo>IdU3\<ҥ @!#W{Ȟc] auA63cq PMwvN$Tdo?c0~F yc h9}S6lC_2W RO*h=szՂqJҦ5fϰ]Dل泵7O5hPKK>O`=#;|*d{oWn<'5}[R9!%|+ ձr~Tƌ^01H&z im[US 5_aafjpYЪkE=*Vĝk2mӫn0!"W^ݻwɩ80a%ЁC2 ;ńFbӮYyLֹZ{Qe\In-] Kbs).C\uLQ^c>Cr=[ײq[J ;Q w||ӳO}quuu&kRso)OeŻ%n%$B'4D&fqcګ4&r !B) 62gĪVӆS0ӥ\"N!%B oQ|]~KyGQt/(2BsB!B)B!(RxW@ACe1AC;B!JՋ G Q$B!wrB0>2I3ixGA!UMJHbR"!$$˷Iu[5+ޏLEF&f$cJ/FF6K)`%?cܺ- ʺBT6Rx`kӶ- vVKXx!ضiX[AlϩdIKIGTy#W2~<=B t̅a=^oYݟ:k+ǩC<_f|kgM8v=I-%$!SEZ> zuz- g=N %) VKF:#KaʉqGP|n5gJ542Q#,}W9XY-mVR2B!*^U*Ot{S`{W,)3IIJ{/;+Ȱ:Rq.BolY tRY핪(063{I#תcq#TMyG+`:T}D 3L Pw\B!^J {mwŘTHK@RTz&m^}Ŀcl_sͫU) rm~ p7ͭrO{(fW'l{0yA7.`>;y6;.$߿p-|.:^\Hȧjf眑ꀭ'q2ğ&c?|3bp;\x♔i&fb76f>xHAݦs2{y$]ף3z fki ?ΠvYIw}c2zp}{&m-o.;`8?2BT Rx~S|kׯ=wQ{ 뒞AXpN_Aq= :6Ǹ!9E=@m*Nb# uws>565Zo]liʟ{ y ȩcהr19f\;Ə-p7CYH=ON|th;~>_wyU~k !D%KX=7g,xpQFOfQxL_Oč(n_`bԯΆ6[bhR ߭|s&gQ%C= _i@W(Ws;]7Ð֤pz֐W^g~X[4QK+,͌1uk٩'[YQaKzB3VJ %* ** qb+,PI瞞n}ඥ9J@] p=;*Tц3P׽=^UV;Ӻ~-ZjJPF|IMnqhڱIl&L|>h?t#:7a BTZrfcgcغ+\gCVDG#WӨZm6W4k˺{HNsfc-Q'+t }B*hoYϲ3D'gC'5I\n+kKɩjc_q+,ɽ{Vps=RY4BqȤ%][$#Hȣ9' 8S2mg0b _ B!*)KV}v^=/6vLrö%_2bp [شU Usnܖ<*S t0ktSqH9<^O=Zƛ+Ѯ6gY 1Dox:M xBTdդT'vcujĤzY>5ޠՐ%>^^L\<kۦ%Wh^˄Gpߜ9Y'M aWBLJ&6ȟ5˿%p:(@2Pn܈ >>T>Z"8AO|XLm~CrB,qi҉[613!Deײ޽{NNNx19+:зIW_/&|4v;7Sbs).C\uLQ^c"% o_ۻo)E$ċGqr,O>HRso)OeC$B'{B!(Rx !BQdx>]~KyG!^F{B!*YB! H-B!D» . RޡBQ`^ fod ^>R2'9(B)++xM̘IKdzg>H !GjRB &!^}eSmW {:]:MMHu動^5mS/9A!tI]BBB1aNֶ(ڵZ-aacۦcmo=&-%RAH_afw -|l n=^oY>:k_H%$f zuz- g=N %) VKF:#KaʉqGX4c4Yj9HB'{KX=ֵStϛ ߾6vL\< 3o q}-Щ_,stnVaF_,\Wğei\>І3pp^we TѤBԐFelIzuhd2Vj9w;ʪPf\αvZjCKw\Z|6*QZtYu SlP52Nj龢E9 kgQ%?uš`@W|jzW彨B.w6vָ}K6Mk;Ŝf$g )"ɦv(5zMW;w^wLڿĩoe\qS*9_Źb&me?rv"97jc]iJa\z-9^llH6gas"\ge@kDFrv3;ʖtYBK Wڽ^`}6vLrZo `բ>6:*vދے1X}@eTF?5&Lc*ᓹGqӯLKgl~8E*|Ln^\˴6s+G~sGWNю Ll]u}7?0;&y Ygg<\*S t0$#t7g8!/)KIuo=V\}VK0LLy5ncZ Z YYZţmZ"q*_ȨN)iF_iFTYh;  rF8t0'/s+6 e]fHlUOmݍ#UN?DPTac5o-x_<Bгi4|~<Ͼ&>\hAi]4[feB#qoΜ<B&%UBB ηȍ5nKFmɗ1~7ە`4BOZłelّJB Z:&Wg\7,Gm!M+VrR+T hӛ)Ve=B!^0դ$$ܣnzݷn>P(WS+ٞSPgJvV6LYDǐ|/i+'s2vǴ8胑G43&Na/Ƽ:|? FlJU!3%ɕn}{ l*>9uz&)IiegeC_WG6sWғ-KvzUrFTc)-;ˠEs٭%VuҤMWޞZa B!C$*i(U9[8232 |]^C>{"#= ktӁ˾fҼM>[[zU.LL1{`\Wښhg,.;FSC27p>8 Mrt϶@F_ Slgk$]|q"h̰:gXאTP%4>=v\ۛ5ǺFMhh{Œ`v~sĩAk8Yn9|!kYի[tQ N2UtdGe*Zm~ذ G.r;ή̛7;S%I/;Y8GfUKZvChl9"Bx~S|kׯ=wQ{ 뒞AXpN_Aq= :6Ǹ!9E AKV>ϑiws.>JTu{<߆N#IwDqzuڲ49ŖΆ9]UX1kwr{ s_ e򽄨=N}2aY8g|i=E\ʹ65(Y1&_KkĸU ^o1nNđSq,K76S]w.kS摦Vu=_6/Ήs׉M)_l{9s!bgpWh!运]nϻ-2B!xIH]ºu9 7g6z5cz"nDqzH~gNv6Cjn=Ĕ ҈F-02Һ73>rCAiхw[' )9pRKwV(T P(PTT*wi0[Ӡak".H5hϲ.G`g^*50b3; }iР}9by*Qj|1l{{γv zY_hZZtvIVVoؒL{kT:88AM0d(651܅5U:qD ?WO&gQ%C= _i@W(WTԨ-idӞo9jB!)˝5nOR MZ[abV8@AFaF_>K6M=e3,D'gҔړy 'iHx3zxyQ+tAN]ifzP$㵏=e+'&.ʑc_19VU5ILp}': 35=:(t }"U͍9/'dݽFDj$9g 󎓐H5zm-w^'ޜ4!'w j/ڽ^`}6vLrZo `բ>6:*vދے1X-~ qH9 Ll]u}7?0;&D|͓ʨ&յ1\~9DJ 1~* 2H$! R/e^#?̹+i_8ʕ{T6`IGnnĸY_xs&36s9dcB!D$w 11NNJ^={?j I<},^kA!+KK|=nev׋ Ħ]\o[L )ˎ/>*7S>oZ[a$&&Rzu^W]x !.ŚG^cBT<}Z?O}K)"!^|G8c.}z)?@{Ky~.+5׎KZf8Ew?zȨ("x-zzr!2륔߾Bey>~-DžBQI&]%#nI^Dw8!Bj1] 0jǾ>ePVsU^d~ !o!B!ʀB!B)K@>pYLŐE!BTPRx?ٿ&-B!"ORx?+xM̘IKdzgB!)/UM &!^}ŻSmW {:]:MMHu動^5m ?cܺ- )!B業BB1aN=ѭS]{R̜ৎ 39t5i C`wVO3 B3jRncP\'v;E\e'×rr>s'BQѼwB=֩Bdn|p_PPnV g=N %1l陨3 !^ VNdݲ26zS uoRu8MlB!-NJn}{ l*>9uz&)IiegeC_WG6sWғ-KvJ]DZu,7nD)~1lz7`!BT&/g}3>R"-5J@fF&oҶkUOdgamט}:}׬[|'mFuI_e;F.\MsAeDn|`XYH7Zm~ذ G.r;ή̛7;Segx %N z5^y2fv3IŽ/=tY=ΛB!Dү<zS_~bܭ܋M@O_ ‚#p~Ԉahձ9 Y&.U"jS#2lϘś8omoŊs;u*f8q+Цrq/6=ܹ^ww1_)JC:eކc*s⮦n}#gE?gNB!xq+ݺ[@N=o΂|Y3q(K6M PBO%+[T6;Jt3 ]}t@-=ǭ{YdqHNsfclIgOckV|#n'];`_aB!/j}ҮOΚIcضKFaV:*v܍ے1X-5i<]#i-.fLm"5FXPebۀ^W?Krԋko؊Gfe @Jh !BTj/o{ճZaTx;kGӋGcm۴h5! X3eۄ_+*VCPO*] (,c?;Cg3%Js\2{^/s_Dg68RjICe1"1Ds.ǐK\Z^KZRGl\"jMq7'"BQn^VM r͕mh-#p8揠y"pz6ƚ=+&TR~szSKU+'mE^ McPX}=[6kd<1lHmoE#S,rZ̪٢gAhfUY8eLv3gԐhӛ)V2B!xT& [cE+ խW߲Ca~g6؈CZ=[-B!*M ڰ,3δ".զn&˿> y=r!MDztnyo1E9qpΎ|U8赅Ucx6k~y΅9!DgMܷ7b!BQ*͇+ֵݺrysZ"8ApDO>sd ws0w.-Wu2ܸ7gNEtV!!BҬx7jBHh0!͕Ŧ׀pZJGt_ɔUX0sb53;R--pT+3W}"Ŭ1-zځffQ5|]F jiIiWY}=[6kd<1lHmoEB!(C662.7R.Vׄ[F-xKͫѰ Ov c:o>xNYPq+F.θ!BQ=hyfqqYB!el5yh7q1oB!*͊@Nnb&Y<>wdl$@XQP@}q ZتQQ .uעjжŅ E)EIHe 003w.}essoߜc5GǦ'fexTwK%C5atLjGmv=G9;/5107`o$ Hx& L@ Xfy`}$ހ} ?X!,hA?94|vڭ:oY%jxp8t적& L`ɩ&6mJtG͆MPx& L`ɩ&nm߾C552 #Qf@[ |rѺ'8:P]1p8]%Y~]]x +|]WW*(kX＼DWG9^C ,x-*(kXﴴ4)‚lDWG ]MƔRw5`H Nt5#fo X.LtƑ`=e|Cj2~x}5:%I7N2ė\v{:l|Pr*EO"RnbstG}yz{۪o$egew~8lPEmDh;y3^ 8f;?xvVꕝSƞ명d;??_O:?} HYYY:s™Xn Hx& L@ 07`oQ}΋1V'gM8+SMx& L@ 07`o$ Hx& L@ 07`o$ 쉮ě[u<Ov5h t>cWio^546Tî'+3K%*.*ft]bbbb=$Z$[r4zh&:IZI[o;]jk5kÉIUTkg%I%=K:]XO$17wFr\N힫! ?ʽ$r2 & &ILE y<t&*IYaMihl &&$i z"IJx ÐaFҋ91I$=_s2G8w &"&CL'w4Ht߬__ν t&2Gis(]FSZЫj<-2LE)G$k$gzy\ZܺDWLR?{tZxfLD_w5 5^_@҂.1{qÇ?cW#~4R9:2d4~v:Ew>zdYWG2.am/ך}g"N&ޝC"ItV[ngڗyTTqǫfg9x]?>D;ܠg')0QmtҩdHK7x@dEz#CoGtOԧ_zmZzԷkk}m0Ai ]s~#0U5uʻzQw &ItVIV\ԂPܮU/}6]xP%kJ./u#ǐ*\B*eFKր#4][?B߹o)ǎѐޭCn֭ҕ6u*/M/(O֦4;z_i%B>5v[iR4pc-o](xSn݋C'`ܩ7M4$Ӑ/HUuSwiAOtØ|6.BoڮҨq}T<ڱ]rv_|#Lf%WK-2}4GtiLCBe5Ӧ}ngo_|>jF}ۇ֚с[+$kW 'd;'sbҬ+c{^Al *qĻRC48K{iw;^V{ %%ej4k/Ǐ?/v/soq~ j~fF0RU2Fͻ,O+rni|Zk6im+׆:sHN0RkxW\i B\O=\ #\[xp.tjfSzegڱRmGk7PZ34i>-}I/im;[ P'2&?hYVHQzg;{wD,׃lqW^)u9xh 50Z6}G[֯oC8tۅoRr5uUw4wUaJ,5Dly'Ƈ֛^+OܡjVjN\rhwa2t[5zz<4Kg[}bҨ-UМRq:z;tl9rH.P}Z|f ۶OJ~\9_XN-ʫ}St*pEsX^}6=LUޠ4z> ߠa2B;HlT$:j`eO?VO{U^f9|?9CS[_>u6Hg|C<3C2j&kShJr4dX2[?&=ft+-LÎQ0LξAf=-N ;&Q v%K>Ln:1RMMMJO֫|dy!&nL:[oiԩS$5Jj-%5Ygj_ H-bb=zŽIHt Vp]p7^߾ǚ^$NfGLb-D0V -^$+~eak:Fn8N{mdx$֒OcЯڊ$& _lkWWa#&CLXaij=z0b?j+"#&GLX#C\ahX1͕fe0d1GLLCLXO1#PCc\fA#ddd\XO$17WR\ʪJ+#=o]UIk$亽J{iO8jr6Z;z"IH$j6R͉NJMMUII{vwn~^^V4]OzzJKJOLAL'D@s*]22 C.KMMM!mnnVQ"*%?7+DLBL'D@VBnS.t1b\07`o$ Hx& L@ 07`o z-3ܒ IDATxwxd7tB !@XP !EAA&R}"%t" RޓM6C $!{>ϳOvwٽgޙB!B!B!DcrBQ?,5[r '~ϟJT) !DC`X(--5$~k_@PQW.ևتUQfYi61sYB\!BRl6cbbovvvA4`̗<ʓ͇~2,,ltIII,BkR,:եKg%s?,K*0aB !čd2)ZldٲeOZ_@ ()WeRSSw899BԦ蘮]EX@%RW2ѯ"BQ\(?|7PT {]*v9::O|;P'T? !hZ;?F|GG ! ϖ6s\@!č͆K幇@R_!.PP:!7g)篨. B__.O9BƩ|HB4v  W'Tz!D'GBa$!А[ݿf w{b_̔QTdt%]CT?Lz$Fq+ݏöl˖uYvm<ͫ˷|UnkQ/ 7/L㑟hՅ6@Up_5%'Y|ڞyޣ5w|Es[ӽM qRB&x{bfT],䤥/grc~" m-/Ed[7>>=Ì1g,(xY'$] pCbP[oT%`mœo/Z6uas]b%{Laڜ|f`Qu䕕ߗɯxѕڱ[Tsq_zm-j McμO%1ckPx wwLrp)395_T-Õٛlɯ]}ظ)o2> UWX:$Vy}@^} Pq9l.YOӞ1e_>Em5\LShњN[srg =9|όnkQ+gQNj,9*Bf= e{q<Rq a!O湡3 1gcӉ;&LсͰWT-E2I͍f<I ҅/iw5Ϸ|R-j}Fl|l<:@U IJԶ!>_ȗOOVk+WY8uZ3xe_`2 <o1i􎭸4)>_ksKA>A|]'7[bj$Zw%ܣ7l.5/o(=v Ev]x*3d&4k8:޿̶nCw|s/=C±p]˨;c^'{7iS~7T5FBQ*\\f45(u?$+ wsA卛!LqB-/1!Xe)ոg0Úhb/SICuMkk!Wr*CKm acBVsIGށ7~3AI,6,wuRUR{ҵt92sGgg"}Wy/zzRx2r\:WnRyMek,C\vZ>ֆnh~٩ +ы@ a}SO8Ym!"YYټ2kO)ONIYo0g븹i<2Аvb,KY_V| XLق.Gg=FYl~!xaH(*!86~n_!T̳ژ.U\Ǚl؞[_E|K?_,W%Tخsv x}V|R}i%W]KQےQ#vv~ܗMK:v0^ʶ-ŏdf'PͶqFn֜9ӟ`n;9{ߜߩxSf?c{ظ+}:׉+*4^j\Pp6C<{=cƢ\ZV Rl0vG$s"K kPU!OJ@?/O'!1 g3ֱ γwJ*:@+Q@  jJH;̒w>DnaHQw<^e^mo!(8 ttDZ-hv9(0^}E3a^QlM//ku]:7ᾰ̝kfjҏEr/@cEp}nUMvvpu^ \snz0VWtr$k/֟V3M0]lFbŨT*P(q@?sgTWhHn9'%sU )Oaλ|ZGQypGԁ3ٸ/'//ŸN&~!]O[V|nQۊqw]??bkfc+Nf)ؑS&B[s%.ݧьtq<%x **h'% 9W5ڱvgJ>Vi\mZc2fB4`ukZ]c( l'Юm}"cHGEܣ"t%'H_K찷0 \IyBݤCB4p &h^!4*'NwB$ԴQqvr \IT4 \9 ȜǎgXxĕ;g ͹ge|z܌s|29CƆ3-wtĩq¼1^Zsbʏ߲ᷕP"Ŷtٹm쉓tءw]Y$p21̂bJ 6v8xo-PT&0S>Ƕ$\3ul,Vi0 55BHX`8r 0ω˛OKJI86'-oic}oAK!X7{plѓ;GCl5. 3IQ< 6:m̔Y 8}'ntZH>pvwC[᫢r^F?; &\RkՃ N/^*-ll9m" Jغ?{rk}gpc1E@O}^U\? \DJR6&iѳ'!N[ R L5.`up}j0 Y@J򅄄=$Nm1*Z0'~XžHSia`$m?S)u%L=5`U3.xj N by8@, zmY4 vf=[u{8Z[3:Bp.>U1ׁ̙ݚ'@RHR D;;edk'T&m4]@ Z(&l*^A^8۪P@QCi:7E @6 SM\FXNg18JxG^iM;gwE\4djݍ-UKt:OJћ8ֆ`W ;Kބw|R2r/j.>`Ȉd`R`Ԅ6݉?;ҫwK\TFp5ARѩdiMvVZHwbJ8c98ӭ_3>|įǝs8F׾O3 N4'C*eZ/NA~b"&bl;2jx훷3cyͶumuDxwfP@JSX/ĨC۫)YOTt)x ز#FjgÃqW4 `)϶74wk> &`}ƜN>8`Ox)  iy%5kFSwY5w?lr-3KC0s0bGChG JUm|vn7 Ⳁ4xuDJ#ϸCػ :GOGׁ hj ɍZ_熪9Gf~6 *cR|hgēaN8j-h۫]ΏT꣔̣<-J,ș6Ib6ϔ+ FT>P&<(]Աx2xnFx9g9JjF38FX5"DF;<||![0$$._!{Ig) ŹʹZ(ɨZ:t _izLKxx(Ί{H*ʥd 7!#6tDL+$md% ;CŔ-dt;T>TTFf-^؝Υ`vz:/2Ǐ>Q*ʹnFqMO -*fRPm_ULNJ0UC\M ..>N8Ӝ.4bRlZ E9]pP}[J[ݜ!"Si1` /;@.=|+9Ģ@&L ^/׏j(k+6k`zi5l uhtAt@Qn)g9K;};Sn5h &B0-A=Zam/9Fhҭ#^碵L?.s~Asa+8/ ?#Bϛ k׸ҵ ;K7Xv]n]@@n3?_חO i9s5WtYJ29_ lpURZOj惽 m>F:({XB8ɢv:ni+$Gqll])Il&ZGxks&2|{KgB6g|ZeڜYe)DFsL1.]4ƶuFi."|O.ɯټ?7WEл`a. s6$:r-xz{:Vҵcs𑌾^ s$P#׾ԥp6&MN˂(V;Wקb,f[_#)O !DݪPz '8VMPIf8*lԀ./uI$̀CJ:tj%έGv -KyxJ%#>.HM7Z2?jB__Y7blI{a^쟼n6ԤDNoSo IDAT0G4gɿ|PУhaנnמ656 @FXF{uƑ=;+_oBQj6^ٴ>UNاCVlͧgy}?%.&tq8ڥrK2,TvɔbHƕG1TڝE7Ha HП{Vx^`֢4#Z}qUdqxJff$\)KQKf2}璺1dB b4IcIduul,?*aB4B5V!RJIB+% @!$!RJIB+% @!\ ,D#a6IHH >>L pttà P*eO+hN<ݻqvv&88ooo'%%8޽;jr%$!n`HN:E>}d2a6XnRP(P*T*ٺu+&@4hvAzz: BP`6W}kJlfÆ xyyѳg:T5-)=Q$7D%11AaX0LX,*FIHH ..Cԣ #:h+LX llH5]0o~⚙fK>}0L>5y/ۻwovYQ0QC?r평0ɱ 4|e;(2d=scl ĽB}wɾ+o~nt:+w/EOH q5qppƻqww?`DŽ1|f~3"iޝoY3d]̳P֨L @BNW{ eԣ}ONwgF1$VxңKbb"M6JJJ p4Ø6PɁŕ$c2/4{ ǘOƶ/5(sZz@, #:f 3pMT['iqKh,%l^K:L#2e\j #6s;q82L}F3鑴sV?K{9s`S)>v̱[1_o%-zbSwکyh˖ˬ/C+y~]n}g,!|&6+K+t4O}Ao"6n8s 4]Kݘ4 ]t!$$6cY/n}1a-2C RJAV:-|RcwçPCh8k[Dl‡qPqxt"dꛓ wH寅s0/fBWp0w`>SMD/7 X)dg֒)U89oF0'q ^ʙ7zi{mӌ/^g?a g cꆿ]ł5]32-xv>P^z+J1L;xGkb"{'nBy|oē/,1w{b1pPT5X یOfMݚw(WEFsMY񩍰nXf}]`*H%W]ävoI)0a2W_]7?d楇X(\iC8^ZB&3륓N;cՖ˿9k45 GwgUFNsMQ944W{ io͹۴ʅn )欿v К{_̮^ q4(ql Vo0@n2r)</,)1;5nrts(C/m9Az)4/F.wiz{ֱ} i$ kۃO|U:<<=?OMԎxSB3ʙSŃxAZ(lh㴿>}31MY0qx7'͹5m(f,) /X ܧkɹnҌlll/\B, nL666tԭrCAlz).|qd(vR2C- c2o48F5*;g4<T+h )HUx\ K&'2JEWe+͌']6ҙ6A& (k64*2wa @#յ*iM6p:3_7Uw) f(ƭ-Y n{9ijR5 J9KS0+m^q%oD]{wFOW]1JMlQ>LPSqx"IIiU0r&6ԂB2Ol=tv|+u]_>Y,h~ZŽF]W+MVvG4g#_.XAB zzk,/ $T[9v6Q[Xn?5<P֍{텬OrbEZRu\r߿\žl9w>PKPBPPP=.ɍl( 77BJ&s#p;tð}6Ƒ~ac}pWְuРv q?\x!;cs xl̢CSy2y,_wI xh9ēߛ9#tl~t>˭``G1{ ;RG cg䔠U_-GC7iNLz?ޘfz/}I]itsoOf$>(=5nf<ß?JMCpQW$))(  N`0H&$~7N.Oseݧ|l @:OE>!ݹieW_2ͺ~ (DLL {!<<__+|T*Q*$''saw~]|&Ԡ5ײeKRRRh4ロ-FgBV1 9sxrۗ[rQpvv;;3F#EEE呗Gbb"ӧM70BA߾}9~8w777Z-*Uٙm&b0 #Y[B&$$!rrC!RrC!% @!$!RJIB+% @!$!RJIB+% @!$!RJIB+U '3hGǿڮL4,#V~T!T c6 6յD#K:^mJzG0KalmD~C(r;߄cm+;f&7ZLfrBdG7v]ٽ~.F2u,NNpn4܅OMcl[gL__rC|ɧwxĂV,\ίPH;an4\?,uq`r1N~*'X훛ٽv?%w08ЙCo|1]R ykS v|ZKA]d=#u{'tJRxO{|3J5a~S;]8?RWVB4.v`JdA(cʸ(,Edn 8'<#XPwҎV t5=ٻ ~ĕ/N 0 ~ɀg^{45UIG6,vD+CgŴvPrCOfB-8`) +[džSÙ\IhX>Zl&{'{&wGn.SL[0[T.K3L}>!hdj'f ?K\G?)~}clIeLyM6'ű*\|]Qp~*\刏 nqp BFV!֟}P6M`KWW1u Q~lbQ.Fu@9FikDdF{wMK& c `YG+ \Y}BB("淍C}|/n4m1;lcuck]uMg6ӿeWp߽&w֥/||?|Evx6mN;URnYKc퇦… +O!E%X,y>Ȧ,w@Bq}(@?(( Ҍhj U+٦OBXƛ,D-ͅƐx\!j74IcIduul,g!u! ! VJBX)IBa$! VJBX)IBa$! VJBXz1xHOO'''NGHBau4zn݊ZSN8::h(--sq郃C]&V~ T׳zj뇯/fłbAP?ټy3Ç޾f×~#q+L٫aua$S,!|&6;s_Ӆغ$d3^{ۺEQjku֯_Oxx8˖S$''s\m-n{oS3wB2Hkғ*rb0#jFbgg'1i:]!wǿ^g=7QX`Mu+ bu2..Z'U5xyyC\\\c|,Z&X:.w^=iD5_ 5Ύ5*j1s"4* 8[v;5_y,A#-[K!11o v3pysb.Lx:7L%޽9)e;_`OȦ΃^cxqڝ4Հ u>뭱dEQLy.Z;)fr1AE|B;G|̊=*; JdD;\6HzOu@Q|ϟƟ8/^?d6/}&DPL2./i̘SMB:`i޼9&Өjӫ,cIћ~5ӭEBxf-yRcf^zw~E$s260`F0'q ^ʙ7ZI}ۜCyBllܾ+sxF|m}<2z|:=p PӉ8ғoN&!e ]eZ}BN@NNʾKjrrrjPDimt;\֙P#sDQ;^{{v К{_̮^ o}UR\~^B%o2^:~8P-yo%wM7 YŽLVZ !F$ j `@UYFڌ@w:^ε:ثt߷W+<*w2ŔJ.jql^1^4$Bpdr"[te iif>+V8Gif=Jrb4=42ؼv+&s2j k')sa]GI3bh\ Prow=|Y Y7{WiUP9ylJ!*6\J-/,NyqTwgdt>=~é4edT=F!D]#`bbbHHH 88N^ɄJB`oo^'..V[P:wf槡Wh]mjfz/}I]i˟d1f3ֺd q?\x!;cs xl̢C\'_Ge|,pjJp~Lneq1 !^^ j*qww[[())!==,1bDBqu%0%-[PTTjHZZZoY~ H!AKǓHZZyyy8;;E``BԂB\_5IrC!RJIB+% @!$!RJIB+% @!$!RJIB+% @!$!RJIB+% @!TR$%%NNN:`BQG4zn݊ZSN8::sq l&z"m`/bBWg-^gՄ3`Q(P(prr_~mۖ5k֠k\Ő/#xmƈG^-i2]c,RMI)dЇ,r%{vgYѺ?7L&M0 -פI֭[tyx23:R2c'b8(Ζt8"C_2|`GoCRRw^f\u'|#b'bƋ# t6M:qs/2&D-N1.~t){`m(*^} դWY1'3Fo^s} ~㙵9tJyq|%CSlK,#S93xq+gބk%9k+ډ{]|Pt+_莋Ëq'SߜLC*-̅|1޽nؕ1aMT$ma[}F;Dƞ87@y>҅g-k1˺ze͙{V)x'SgO Z-NPih9AF@XR~>{ !jNvrrrh4FF#z.*knJJJ˨jr;83dB6 FBXT uEX"##$h"KKlb)(E$,! !ɬ$d1+z5sgNsܡpDM nэۄ ހAqQ^fCBtHIDAT.ڟoPd~=7jՉ2 /ā"i?tct$q&1eO*J_u$r4=mu;8kCD"C.T|vj'^'9D N&JbIӞ#K;bIށ.+ [M쭬=˄%"8 c?HC( ={o#**V%{ #h[fAAAa2U {_\/ӿo_4M>KlF5jOa2@oͺ~~&J&8!{cMJ/QL(BOEBQN~ 78!1'BpE%*¹oP˃}.z?gߑ p6^(|5AuFjj~WShlCA=*u'B ,&/ԓ8񡠠+{3ux68((89[2|0 s^3lDiW8s@sŀ鸒̴IR&?~:j >^[1 DD{;w, LoHہZ#}zS-!y`ehH݋U4F~QJo12:'܏(sPll,Νj"0 g1p\x{{c"&&?<;> sX0/\b _^+͗ٽsN^=l0WI@-:-8p2'F#zՎ Йx7q || 4K]ŜI8m,})6:t!=٥ճRx _'7_:x˕GfHvl利|nȽOYi"r t!xmoY.Lk|_F+# Sbz4o5dXL6ﾾ͇Αwk6 /(kBNl_+4v=+c`ϋe˘ˆ oMH b|o-b c8՗@^^}ջlHJz џ]"Iò}SߌT/eIw"Ea]pooAw0f^2:^jj1x ujּo}sF!_"{Էliڷ~bi& !44x v;\zFoCKgV,^0?oFQ@9`j\Xݶˈ#سgOk7c2>| 7JQ w,KB OחCEvv6Hxx8]vo4g9ev\RrmĎm6 !-mK@VR|x%Sp4ߊOhGG/?rf:!w$ ?@ Z!PB$CI!B% J@!<Bx( !PB$CI!B% J@!>ٽ"-vF2y(*5Ƽ]KaL,z xe1KU;8|O(cbmk5@tzy!-ekfr N<4q&~ӝl6ʖ'ŷ[89z6º2z ׌##'~ĕZҺWϴB]jr-Uuuft7N"{-f<C`Ihild' ނUJz7voGλr%Of܉wOcD5j뽀=OM:6T bꕝ̛_fyb^.rt!:XKELL0sŴXmޚ7PwE15\֬k~Y/ >'aA[9fQl9zoE}vN͓ݙrie%~o!3___, [@ڬ|olq mZ7zAp?KK_Ͱ귤Hz}4= ݓMɻ8kM[s*W e6t!D'Ckm`DMN>!tՄ? qE.s 5=iWL}Y m"0( ?e}|ź=:#ΊVh~7bߔg , ov."<, .|i"+zCl.Z.'Nj4.j_ NHXS5'rw >f% G/bqG}օkٟ},!_ aPx#)}Юm[RdKӱX*HKYHDXvUUѴ'y;SX|;//Kz@|b,z^%oXfRʝkA_Bzh;Le㡳\9^oY !nEAUUz=6 ITd֮^ T[^^~hDUUtF qrI|Awِ3bhRF=ίǢY!ww:U63rH3S&2gIH:Lw4l]sxJI1i1hZfvk~_ZoF*SӗnZZâToA]Bl/MAvE@@mڴǧѳ{M(//'77Bͦ fF(HTne5~.ndz~Gg\.yyyw}nhT2Opտ#f]UB|SnsW^G>/[!p\]B% J@!<Bx( !PB$CI!B% J@!<Bx( !PB$CI!B% J@!<Bx( !PB$CI!B% J@!<B09gM0Գ(?`|j IDATxw|WҦ{@ ,Y" RDU+_8X.Uğ_,RV,i6hS6m4i|۷nݺFhh4:s[B"T*jh^!8Brv'rYqؗC7tBQ\URbƤ1(,&ޭK(ei"e&h.\.^9-k,rh~nx2d8=/w=ue!DseK7bsoӬ|3h,RӔG`` Q"<8_CA3g-6L 's̟9943 7Y{ľerºBfɖ!rѭkV-# mi$X)aΖo/77pjQ\֫'/= AAAĂٹk7^㱻3STT'3"-ڥ;Nqx*O39+E!虜;c?1- nnj7iݺUC R)lWdӺGz &>~I:; Z5ٳw~lrrrܵ:srj Z-FB]!YYxzzѣ{/ glCd(˘vvno !fz „VDrΑa Uoa-KblA)9Kd}=̾ށ釢Kg|NNҕ\V5~^Wsnκ ՕW,59]`ڠ^ 7mgSՃe"'s (͍…R]}uVͷן#Eoν3gv?JHj[_ߩEZ-"]QP?kFÓА0 fHm;n"R ~ Jf4n`g5 +Z)(RVP-+ث_yDcC$o>)\ƝCSU} Uy•6#x^N f`hↂ"ʩ<q< z,{&f>=#Q2'ˋOHx,PԇX8c Giqs~Om |5E*|Z0;#G^ʃK/yi?*yV+Ao0!\_|RVH$'L瑩tu&H x5QN̚;_ Ob)eILB5kky4msìx[51YvCT],§U?M{FǧJ̝ǔGt=V4ZΨ\> E'ZEo\qݡ3=tYL-xzxC |Wtܝ|^EȀQ>;3 N. W ٗ(0`X+;(  7Ti˘[G 9;zyIZ߂=nE@ E[?}PMnLzr&c 0 =t @]ݩu`zG_O' -Sv(P})7EwzS!,J]t%UQo&F4$4-6Ht&lfױ7=@kݩ j0 3-mӣǺxU,"$Z=>J2IsL2gJ ڧ?zɇW%u16V$ˉٱ<2rBF2|eθpt]9o~\ñU;zVA¤^^P| s|3 MUd{j9݋93=?sX} Сα~4g4:{̓ej6~V@xvVȱX _Λ«&);;CL<(ǎ/cq1f?o*!!}.,Ep`(3g0暱RXXX{6|wsQh j"N7a GXzجBG;X)w3'?;]Q~sK/dXYm*0 :QȞ>P|kf?:mG@Vfް2֝NяjTZu Zu\>J=%EG7t~Λ=Eӑk'e$~ޟ`~}2#p[:ϑWP*ʠհ.8Kr8,ʳtT.+c0}WGukmnۋHVuPݯ/cOg|WaG`4ZwMj?bpd}cO'͚cxd|}uD+߿yZ-vd5\;:FVVrmjZ^9+k0/x`4Ç2s>? tTՓ R^|wg`` 38sHt d%<ʻ2"=;s%Ӛϛqې<۴=wl8B':.zPZ)JG8]|TZPZ8B^=g≝?[I^Cȉt][3FO p'02{mX-0k[wZg.p|1[P[Lά2;{sA- seQF98t0;u_Ϸ^y=¡Ç=/XqKN6={Y̥Ďx#Gpe7js5[sP5cX*OwYc,3ޖ.#xǐy{,*ڹ'a+?oW<>O2,|`ڴ ^]MSBBסz-ZE^| g&=F;I9p PB;wl@~7~d¸i\JGQ< ~֓$\K09wc6xظr6X' vBmS[L`<BvN敗m2.lf_`7qmjP|W/٧qD&ŸspZ@F濬/33ɑgF ?__V.ZmIcrѵKZ3{g̤VkwM7ha4-FQ*yȀ6;`p5l JTQuGh/@[^1PdܣsQAQ$׊{bC(YV)ǔQ+ Fy_fBA_\  l Y`7w5* ŅhEvߨm{~rHCR6A"ږPN_jW2dxsA4?xEK7-;wµlAsXDo}lAZjɖ`, 격ӈJ:|?Զ{s,KDt7nKcMpb$g)yPS4999ѣGgݺvqflM玕]xst3g]I&oB4ff]]q|l:$ShV̏W :w5#rBlҚ]ܡĚ"͕/$O[Aϙ,]rvSw gʗEC4uTW&]}YWMܽ__{ m N_߹<[Dlrg>ESdwrq$(ztwx@ۇиP zth KXZpN#[;xZ,4:󄇇sTl8i׮sΒ`4?8x m۶m~4ʚ:ۻ#[.233-\xzzo>;FQQY "::={:!p<^YS疔4N!!!\ؔ\@iZ- l,F# 6ƼB4:^5:ךM BtHB!J !B8OEB!brqC!Mb֭B!;!B4ҡS!%ɅB!J !B8$B!p(I.BP6=[tVB!p!us~vLgK4իk'hD:|}=E$y,"6}m-LjB4)QQD>|G><QQB4?\&̙Wu~h1sfD$͋$QQBB4I[)kBx\&˼EM0B8$2k;HB8$B!p(I.BP\!¡$B!CIr!BB!%ɅB!J !B8$B!p(I.B8]ZZiii ' B-$$,EihD}h-3f`ƌ FYnǏoV,۷}C8)=ztFb 54,Y@\\ ӨT* :VZ5MӒ%Kxg߾}]| ^a:x:… y "55ժwС׭[WlZ[A.\XeW^Z}4&&o@Qlio!Yoɒ%IHHyy̴㦥_hhӦ?([X?~AeX|7.Rl7`ڴi忋sNZ~"Ԭ[|z `Zz-..B9t֍aÆxb3R9ŕCnHJJiyӧO6Vk̘1$));F~|N˗3~xeB4iٲe>}T;-^تdff* ,PXLӈ#C*َkVsZ4@I夦ZO~sӦMZffSb1c2qD%11,^XYx̛7O;vPڴ옘i>O||MfyyuaKl5MW_X\Ͳe, 0 ݁h 4.HLLaNW*/322xMI.\#*tgTw0lpO^Mj=l=`k1sk׮U֮]% g퓶/t򛘘L>]yǕ$쒋MR#9k6;I.\Kff}=((Ȫ3]ugff*˘5k2vXۻ=[6NRYͭƳv{@X[+bcc^#kGUraW#9wnSdZ]x;I.'33SIKKS233$%66V2dNGL5%1cow"sum9nӧS*ƨ)'ӧOWMR GIKKS,XP>gM ΪX%66V@oveͿslZbmg|ǾhO<3"""nsF|&pd_ȑd4bĈZ/5EM1HLLT| 囚NƊb-gߦmwƲmaαt٦߻g[5Ü_O.233UV9q6cNd^ک;xuSnݚ\4䢦qȵy{.8{v:̙cu suU͚֕c*fRz+O[:8s?2t[=֪kr\v/"###77!WQTIII߿p6΅5㝀}t?5SٻĐ`q g8uk׮2P]YjjjDnn.}k [3߇ҬQl-O~m͸/ZRyj,>>cǎOXXAAA={~[e.3΅'#YsTCNru?88XU dSSSC*CUV^lذAٱcG󉉉p5֖mll|;W\MVZjAquSSSa IDATiԩرc~]kYR5fff}1SSS]” *6!2aQ/YnWzY cǎDGGvG|HII!%%Ablذ'O/'O$==uqܹ*&((]vU^zQRRBPP|dvq)j5w̛7lccc?ˣgϞ5tիu\#F_}*)RaBFO5 ^d )))76--vMZZÇ'66ʳ ̇6/==={۹Gbb"P?-ihZ>ib}]To޽{ٱcr-sϷlٲ:\؜\̝;___JJJE.}۸pEEErqtXق>qww/qLvv6'Ol&ZFQSRmLZ`(_F͍􀒗^(W)TRRRayWjF www :!kra˂jWJäOOO QXX^]vョ'a4h4U* Z]~ږ3SEDD́ 77/NCO^^^[ܗF#j77*y{{끾Qքyi>sP֭cҥ|Wu^3M<1cT$pB233ٳK=쭲Xt)L> {zKvٳg&O̺u(..bߞ("""߿?Z={AvK9r~~~0d&NX.C~~>5mذm۶Ô)SHLLl huֱcWӟATyyy :eO[LKKɓiӆ۷3Ǔ';vc֬Yx{{W'""ªq=mpprndɁd={h111U]Oꪤ$>}:u$33a˪+Kߑ쌲jH.r(_ -20ӵp{cm_ߝ(]ISl0qV?urf@[TL#:^[]9*kkpF녽џ16 3oIϒXxݷ+)ɔ'%%@bbbxHs\g6/fܹ]֮}R+;c^x&O\r-_X_[_|9dff<@ma;rtVSyZy%z1$$FCXX?8f*?mPMkl}@||S)>>^ӧO\kOrU֧`Z!tvΘ?:tlla3}t⳵uyuQ֞؝t4g\4Նí/^U;µ2?,,﨨(%""i#$$$ijjru[XeСNK,U'OpWA_EiZpu#ʽ]v.dM1664^~eln51wO>}:)))k׎aÆՙϟOvv6j~xŋ,NWYz8%#ZQ7֭oۡ .dOHHpȥѣG_Qro4MyiM2-[ĉIHH`9rcǎ\uYW]( gqt8ڔ)S+iӦi&z'|174I.p <9ە6EuM.l~HS3{[i!4:&"E#~BBDѨnEB!B!%ɅB!J !B8$B!p(I.BP\!¡$B!CIr!BB!%ɅB!J !B8$B!p(I.BP\!¡$B!CIr!BB!%ɅB!dffVym䘱/~֚ϕcv>WF!cv>W\96ksجϕcv>W\96[櫍\!¡$B!CIr!BB!&##?#ǏwrHQ]DH9) R9t ( &߅@\!¡$B!CIr!BFMzZc'\krD !B8$B!p(I.BP6V\K0pq Fښ./b4_or۠BCigONIlUr_dۇDFixf/KFv !Dsl <^A4`xxh=)>ېĶ+xjI^l~h,KZϣ^7Yu#\'yD%/"ߎƷwlIZcg87=ɫHS&4_=hJ˧ܯ8JpZ9sӛpMPBC~6 pJ9.׻sahC mمyX&E! 4f&{xr>"?cy+J.&+OjwFwdyD%.~Ĵe08~:h-@IʃI~yyv oF=:?ۊƣ]ů捑/П#=#n]j< . ?=n哉ps64f\ GZ EY'ƛuTmF1>}m8d|jr0S䎯wAC >rf) 3Br [xl}G{~5JQ>j%XRV>W \+xtk}+9T 4s\ENw"^ M_nV7ږ{#iݳSŕ-*5Olgg4b<9n<+=@TӋ[Fn{NbqIF9+ˢ+;bsZ7W>F"Sb{DuY~-jEl =# 9yG{W.6~FVɭ_'˗f=_@6)MYEyV]8o=SN)u {+tܫzCg7|[asWv*>JgtdNז3klEXrvrr9(]쟴Nzy;m+LM..=VO(A›7^9{jlRݢ=GOϟӡtYA^^/fҥu'u}2~m9y%'ό%8~4'N|{Wk|3q'3]c/exWI>5,9Г$Μbݯɹs~*SvZ<N,?[/a/ų_+ { =_DPZʁ\y%%i7F6CpݲZ(g}k= r>#sK%4҃>6@FAt2]RV3YӼd/fӶ7#}ڙW -U9ߣH8ߚN]/g[gL >Rٜb +FS~`lm㟛k]H }=?M4\Tr0fգR)EO}򖂨))L|5%S#ȸX* x6RUȰ8͏?SJ (0zFFqg~Yׇ`7J{w/n[: aނX'c֢9#奡\*vxl ="Cx[كwl`F;Et ( &߅@$B!Ʌ !¡$B!C|'//q! !B8$B!p(׺EqE P,D* o//[_3y (qI =PB8)I.Dtņ+"@ (t B9 "@ (yzC=FN>Mzz:Cpp0[urIrH8NbD;-[d!t5q¨#i2w3qxjw'~oڶSdr M 6Ish|z#ۏ\PO8gҭbtG?8'nO~/*,{.k9s {! Zl?yyy={4ݻ7-[l#IrHt:4 !#9;>t39^ܲ^gfVSw[N` ۻc{7WØ#mQf ϬP3Ƃ}a9 kKhEa3|pZj`h4Җ;ҥKΜ9æMȠ{TZ l/<c굽m\4"J,J "k=Cׇ{:"܌d§/,?^{^dד\Ttɍ5*b⑷I :bĉTjOb %%%1qD֬YѣG=Gtx91g9 $6~JOO'==kEQ0 CzEQ=z4Nٳ ҹgf՗:R3 G]KP)Eqq1CX(rphuG$||||poe[z]+bWVa0]60S=8uh4{lDέO9ŞR4xkd'T~t' ںo|1K%*giНfIӋ#G&wxAXR|M˟瞛'2rX6=%Qg'ltPkv+s'GG >km[lUט]hd޽ 6 Pi2;tPv)Uf篯^)c9r3k%O>01c2'pyJ[VV&+Zzv^^={#&2so}[?e\KII gNq~z6t:XJ.t:ZgH=zc4)~$ 'NG_h4Xbc;hKI4I*(, 9e^^^hRr'L?tmQmV/d ,m9f,#G_c?(ne3c񷕙8)8RZ 0j,0MOşO0>9y;!.Kw/g~W1tǼ,۝31ԹI w7AɅO^mnkQ,֣?3O=6 kJOOϏ` #44___N>ЛS!k'02[頩}~0{x7y7~}AܞV]6ϾJm+/ߋgｚm%;_n<zNitxՠ(F\>V?GddT՗@[@q,ȉ'g .~yA8y¢p3SƔ$gN/%IŅ>{ ;_&FQؑOVT?~h'xDN/ąoz;4; ʎ҆|=m <;~Z)>;ywX¢G ,0 YgVU,^ky1msVt168۩48`,c] )]*gΜ]vS\\Ltt4O&**ʁ՝&j/,[ٱ??/I.x\[{O&G_|‰h4L7ۻ?1C:pEHv`k9Ж+/bWZ6[ײqJNq)^IDATT*"[knh VK-^`uˀ5h T*ܱ nnlG׋1 J0*FԊksm`$'SKDJf0Foa)" L!4DeX. DKx(!eųs)Y%}|)Uӂq6%gs}DHY f$'e ˷FZWQ|@{o;Rr?>|rZ@;;Ajs[W'kq,b0 cs' yq|0g00gXqDV#>Ͽ/׳1|$ZGxY/`83#/■$޼^o];xAѢ7q=q]:W|Gd)nE/(MLMjKgɚݤge+|SF.W9 uMߝzn>F;y,ȅTb[y5d>f_۞={ֹu744m۶qyEvFGWz8cJ ) dX(wk[rZ_WNJ.ttE@ S Wz][vY/ۚ Pxyy˾=HFUx}=ٷN:+֡k6_ownNnIRtt&^xm4; mHWjt}+ѕ@+ZuamjB~9w"#GGv`訶| ^ː9LO~ϼNÚMrvfG0sm\!y蹙t=E/;mY6w|>&,Py~{>%}A. ?pi4"Y,C?Cc\m&0'Lw vpa?xZNDfx{Y% \ mkϑ7.:͇yn?AJ]/]u|3g/X}K˪9>'*M,(do ]g}'˸cv2iv'UI$k<id~5v!Y@Mh4:hJ[sZj到*0߿^ CYr&:biBf!=.#u$={\ پs111\XasNa:vfӫ:Ӓ F0&)pm׳* *cZ. xh4hHz%b~d*q%c0 J~}~Y1sݥ/% *oGUp0&qRw5ޕ+Olݻb =9l#wVn^?[xGi|hiQށxf͌4e<Ϛ[9Zqpg>[f3S3A|zRuCv]mPCJTp:.8g>ߖ{?-,|qna 0ز37M9_ïڨO&qb`tMJd}Z}m)F_A;U 0nL˞8<…bPĿܙl&w+d#{V5Prrτy[:b# uޝ7U{dkZt ņ:"AAʀŅ ˸! *ˈ8uVE6犌J@AB[lvHҍ&Bz$_b{yPƎ߻=xߕ2Y~v{WCU-f3??"̅ۅ9Ol!olڲx0M͞?zm4*UOdAsayŠAcHVL&d2swڽNE5?]߱kwLtZߋ9+l6Tvi! q:DU"[Qhy?. ThcX0A":JRS4X B3 $&pPC~~"߼Rdϓ m1҇>b%?B)\pԕQi>η6G +ytu7>C̿BהQ%hj8=}䍋eT\4Ѭa)eC #cvS4Vp5Nf?qw41uI8.eL8=wgۯ呗?."_Lcc#*UϺo<e-T*??XR5O:8NZ$TVTqF*+qIz,OU8=kl8rŎ* JBTO j"+uS;hO_&lE߾12`>ߏ|Ku^Ehh$E4ZIM&[D J8n(9 -cѯ 1Qi maouRp&1el]+9AbJVN'Y)DFϭ+_bf/>`,.˼|޸0=":tT࢑k3_`c8'H3~'_YqWF~Dayh4c[uth;?"?2yO,~eI:N$!C/8c/`UÂr-[R]]Mttwd2N8AJJ cƌ p ="& =?W7d^گ,sֳ*r\\$rtb42#1X?m([ m<ӧD.vo~TWW3[0L斐 nT*9c_92htҷ{pD0 B p7n a Lwzp[(tCIUH}Н6*=| &Us >-Yb˄/o(F_ߏ\#a'̝s У0UPŇJzh$ѹ\?urM"7)Ns2h,f*"SIpFp:\_Ț%/uQh Wuiuy\-oZz$@=`CV\d K>|5K~7pi5 %s4cyHf _͒'\O_s?zRF&a9viiigikm6H]&pRW6]ʟ#P櫿\]qe+z|! ̍͞ICIv{ot퇸ﺬ=y/jl{{Pz??yiZ0{.MoT[[CsȽtQ#fg`ܲ-ˢپgzW1;;efX-Y'1~h1Vgky#ߊ|8wgej7p Owҷz{}jk2~ 7c7n<'0q_9 7n\@y3|.w⮇ ^ɏ?ü]v动R>b/#ѕ@ ܻXDHqꌙ{7wRkT:f1jTDy2S)u3'[TWWsA6#@P(lSZZ`b#fp~/Ryż6i1l\qIBEWur&ulӦMDF"nAm F.G#ExyXn|U9;*?@yy9IIIhZZ-“шh @VVz+=ɶ.M\Gj5Vs]aZ 9B0yUV4<]SDhL&#;;^Ϟ={PDEE\%t:Z` IDATxwxlI&!+(ĂbEEQAEIQ(( I5B =!=~gfwμSμgΙ!B!B!B4DJ?W_!C%=cEΞ=_m4AQX/u>&O p 0Kz'զM6Mcٰlչ,B!*HQ4 6vȑ8XUKIpl6"!,V۷t׮]Q ^|%MI<ÝBVUiݺuE\碿NPW3 .lY3! !J8ҭ[!\BQאiwwT!D b7(%&EQ5B~1\bAaPITKFB...@? GgrBzϙkڢ!ߜ()z(%]*_BO[C0PB{p[b!Dw _WtO9B| H!.  Wx!D'gB$!P1ǘH9[wz G+s 6 3adWP1k^xs,o`9v岥^r]2gxm_uV~ZT{ū$##2xc[GnQ'к{~qn3֛6ڣ46`#cXq|n,R$gwCK}C.4jb$'m5搞_:bL.UXWm]'6jcysۼ1i"Sޞxj<KTUߚG^ZB%UQԌ9_WfSW uy~]j1sv]'Sw"e?^z3KGbx76v)Ga=_w]/-wr֑-'N ⎋4ߙƲm$+󮱌>yc,6QWi>%q{}m=m>E'<ժpư7`s._+:G#izu*l qaaߗ7)ZhQH.WB ^l[Q%LvV-alel3w?MנsnC/B7w;H]tA{feؓ;=M%E|@uv(zӷކwQ ~.f9{gG| PzPpř#v. M:u_85ԇF$#bO^#z᧤chϐC$c2~_:4_vG5\FKʲvGylqG @$+?ϙ-ޮm! i4F#z=NZ)$:׈Ŧ6_}9xiⓄ,_8 i0\ >;bؙOׁ&l9k b«<{{ZSkRԈ',)fs*Vo!_5;| _eba|[팯uR[ȱw9ɛ3ʑ@NwǽV[]\?l|oG'`OΖ+ wnUrL|e xA>nw}|-Z=m͜ s~xɇ wzvN-{[HBZZ:SߞK}IL>7&MǻF1jȫϾf @U¾(-'%j7 cb? Qp_:(އ\@z| 68X dZJg1]5ʈٜ4 :5q.Z_G|Ww+/5U~$Ŷ_]AŖwI̿NAnA ]UҚÛݢX;ֺٖ%rX_4%m[04@ߑOܩrEE5g˹ cq#'\`ڌδG< F0;H8?.gڅL⋇/~O\)v9ڽ%]{Ŗ(WV8s* A$'}uW,E0ek+ӕ`%3)?9OǮMUfGnk=MnnKfufKa S.xФi9B\t|aso+m\ Ѥtu?Κs '.jՔ_U70 }˒osڔU;ws00 uW|8g %yc,o+(e[SڎFs|gk\z?q;}^ mMm"00xkgs.мzS3skw'DW|KO d Ef'†02x[g #:+Nq"lSu#;!EVmvpDzɠU5=st?=ZwB4#'{J9%BcHJ!  !3!pPAIB%cB @!$!pPAIB%BJL5BVbضm[M!5kvO !?l6]+18;;hPB'JBGThj $(%("gBQi44AIu|!QUb)-=4kڄ RShެYU<;'6iB^^n>7M$\H$$8Z%-+))6ӳ7JĘu:ZFQpuuP\t:NNNcTUbЩS@[)<ȗ. Q? rrCsDU! &C$Qj٢C:k[!zNs.\H% @9dU.U߽͜TgMgQRMٹ}*Fx)xkAq$7ESuIMK3zvkmU,B'%.%|uiK\Ueklymտl@| 9 /?º0dSXl.NT&L5md~ tb`jA^@>I\*ZƹW֌$r'y.3:T@ҡh\D mOZ. >']D(~tb@A<+3Gx=v;qTmPŴx uރ5$Tꦺwo#5`cޭG}u @q! l$fY i6 "//2`#|"&hrxG 'Ӝc+.{gtlAaJdk< kQ`YD;:oGnhQ;gH*"&y;ݧsͧ!AFܜ.m \h5'GbIS ɶ.uZrrjc!vB&>Oz~M| CtpևŘǟN(GX>#~8A{G1|>39=g;ѕ{#, {zriO!t4_/Z;?ፅ؟w ֎NȂnƾ =6Gs֤VNk:GƒNVkڞp}#Wzgˉ8RRr1HG/.Rӓ)s..MhT'7Wib”sd7 ;T`z`ڷSIǒ 7 x,)~AOgMņ#Ġaڸs -*1 F$i&.w$ =t9qa~ɍnl|6D ^g\g]DzR7/m,]d{[˜s]~!v]ˎ:]^TGFEMѠz F4DHeYOyp!`yd@\-O0B;pS2ȳ\*a>8+\8uD,eO46G`< 9tl7BtKcCzRzAI%'D{T+ <;H^h< >t$a@ꫀ% nueW$Fņ HT'Iqֿˁζ7.7ֿ,IIMM|ǰIyڒ}nW ڝ;M6$:'+;\YHEox/bX\АHAs[Ņ{Yeϣjթ#{۵jyޡ][&W !DRBTIB$!A`Q%^W\2떪ũ @!Tg5zvvY!Vek<!UFQ T!D$! JB8(IB$! JB8(IB$! JB8(IB$! JB8(IB$! JB8(IB$! JWQUl6ќ>>j%>>j%G$ @4DEEYZ1l6z=ђj$`퍓v8qvvvTUEH]  t[t:zCPߒvCPΓ(G}A㌳Շ7òu0-*቗//y?ǹxQnvkS،Ě"R5KQ)Mڣ腮sQq'ݞLKhKՈUFG-&D A`f&;$۾_5'iG| &uرwKSmbΚC:Xγv{,v|DpۘÈ Ēp- q[11 1 D_NW1^+ӹŰ8+O|I ^=FV>YV`>7Np!ߝ Ci~!r&NNĄiJri\W_GGw#Nha<5v(=JVW.G E9џc ĥu`z $R9'g j RT/ºSOF'E,]3Y֎kS%V>s+/Í*5ů1pwƽ>6lX0i BX x; ٩z9I<.ڄ2 IDATtl.ti̜=6rV-u3f}>!]v'c3PT;⾪ɩ(>^v/6(7WG㫀RsI ɤ| I-8yw .Zɫ"왷yn(cAOu=[|=gfk7Wb\m'9{p+{i `ϙd9|1 [%LэgEX5a 5t@BKBʁUs{ ^2Te~aivk &Y -ͨ"llv/ԃL ҭ\Ev}fwu /UCeiYĚHFZ/[P|$e[[|f#\+ZjR~̦FV'.<2}i\l qV:nI VLҎ[ȣo䡬SlZ1ٯ\0V]5s gI|e*;Ң+}CZ\RC^efM&GA)s[PQ#!ZfdwsB^yC!^7믧2=/5ؔy^^WG*u5nMHJjQjj*"L222IO9ϱe{Π),{k.Œ7Tn[αaϴ9(,9o$tdW>F;މ1jl.܆*beT=-8ykk$ ӟ4f.{y4>yM2ʪwc~c|`ENᵇEb)¸8IAnʨ ׅD͑ !3q-L_սBT39B% @!$!pPAI ` 7o,$JNNշIh0رc$z('';vVۡ8h0l6111ƒgǯ:`0FN.VBT=  = @RB8(IB$! JB8(h0l6ќl`׺[ҽê$Ke`{w $/<Ԭ\Op'L;x/iÃ?qAۋ'˘lOf .Ӽ]0a(ͯ ˙8m;1+;f߈9HxL7&;xext4pp1RScC鿇WF!*nBׁaOO`T@5e X>_j_.jN`Ӓ|AL4>c藍W*\9dNu·flް0r*s_W֡6GX^}rKLh>hkOlՃXPf#Ь5jn")A#4Y4<=5u3^ce^G /\θ;NC+yu_=6Ov ̚Q`t @)RӱuG4–7_ϙ볽YML }af:}>>=:3ft'~Zn*:_c{} m\ٰ`*|]07 *s_<Ҧi :xf5޾MʽFppیws] q) ][4vÕ]2+8g-XGzjwle_ uol;X0g+5̙ZZueiiW3z(njۄO<ݝm(#xmʸhEѢSиҢ}ŝFFӖ!x 6cO߆Ǿ_ؓ֗΃ӯSs[eĒd53U5 ?8ΝQ?5 =.za]Qb$6qj̭ !ʻ⥌e=\MbOj*$9^W/O_{) {ywBf<К_gC3gC/Uk_+٥zm:n{~,C;ؔmV A53XS8GaMվ RHw $Ľ4K(>}ʪV0atGF.%U"9 .S9VQl/V$&{h\N{L\Wwqhpr5ҼL_F`oC[XolZЫ__1(Nt1: Uo1i<:FNbVrX֬sϠR$ʅ1h>腱fbjʘFfĐ{V:.tK̬i_7(7y(Vf&u .%Q1Qnwc5k\5LΡuKp<ūi7|i)lYX2l`nyYGQP3YgNS7䪍 71/[94ۊSB[aL#slX3m{.wiy;s6cD?ik-] TnP1T2(yGaؔNC\ϼIOYscl±ՔUUsEPMQ|s|2kU|rFY33bgϞ%$$p7+b |J! )2ȣ {K62N"-/9t6NM)j#+%~cgi>>j%>>j%G$ @4DEEYZ6~n`DGGKAD7NNN z=h4麫aDNWvkN^w[ny娏QH]͓5.܊ f ua! JB8( J}GVc 1%gBaM}S*$5 /JCwωXk"֌}|.eEt@l흜[4i`lؙKQQ\<9'g j RT/ºSOFrw_Ҩ1ザ/}9`j >k#`ɋ ?1~Zn};~w1q@mc^`t#,܇ L.?.Zw~ͼs:Ù0n0Miق2<:8VwB{ 㩱Ci_2=FV>^9?L\ _==Q^ht?-`8=9ش#>_ͺe;U4ҬH9dNu·flް0r*s_dXiۉ01m0 |0O,JO)\u{9uùm퉭zPʬ=;EI; ?ٚۚǢ| OL{҆0㩄+|^kd+=DRF2ixi4IWؕ2;lfkܽr"/+)7p&? #˱_>f카Y7-߇5\ ǖY3>j.;(%'R7Y5?[ |L#l 9>݄ۛ_ |dR=qo7y50-U?ԙ1?O>;frSy\swgchȆ /݀Wy낹imxUa^_<Ҧi :xf5޾MʽFppیws] q) Zɫ"왷y;ʮfd3#=vsfm;2/ zBBWc;ȍ(DMͪ.8 ؙ^tzЪk$-ݩ(_;ǩ|kY@= oL`H8=9D-%\JSQ+y&4@}h\ŽPg5n4moN!Dy^KIIM%553ët*#kaC9q/.]ȌZ ylH vkYkS~'xTlzm:n{~,C;ؔmV A5hXg֚A]]^{6m}#^E5; 0^JCUm g@XMJpn۳})}ʪV0atGF. zUz04Hεu :+:'XX2ΐdɷ&!7ݓFwc*WkDe2r{soz>gU߀1׿WG ?n}Gp`[L7SعYH97JsnA~j:G* /&p%▮Ύٚז;x\ZTbS U<.H#OKkh &\ώIl)f41뇛(ӿpfF<=q/I5(+Fx#ebӊ~DѴ,ϖ07Ӆ$*FB<*߭u5nsy uv\YaO[Y1OuΏ~LhwC:4J.3dOwF ^[^IDAT'V 9n bRx5ƃ/u gL6~"=[cQe/oLxg.MF*jKob^s&i7Øm)G-ذg\8]l_1vl3ƈ~<0'Z.܆*beP4h1?Ì)ᝆ0 x$Zr|Z=n8>-yM2ʪwc~c| !*@#pUyGjB8(IB;i0z]ZK]7o!o0$8} BI#)4O`d%}ߟB|8E0r8\.kso%WAp5ijUwwwp}0 X,V9Up  PJB @(% PJB @(% PJB @(% PJB @(% PJB @(% PJB @(% PJB @(% PJB @(% PJB @(% PJB @(% \uUmv멪V}?pӶ_Uu[U>VϪścU{ֵ @7U;|MX@Ƚ_XS@sЛ'.OmS@Si'C] \6 `>\]'^_̯'PAW|pyTC; eھuJ89.8IENDB`parlatype-1.5.4/help/de/preferences.page0000644000175000017500000000561513204122226015123 00000000000000 Wie Sie Parlatype anpassen können Gabor Karsay gabor.karsay@gmx.at Einstellungen

Sie können das Einstellungsfenster über das Anwendungsmenü (neben den Aktivitäten in der linken oberen Ecke) erreichen. Es gibt drei Reiter: Wellenform, Steuerung und Fenster.

Wellenform

Auflösung: Die Auflösung der Wellenform wird in Pixel pro Sekunde angegeben. Der Vorgabewert 100 bedeutet zum Beispiel, dass eine Sekunde mit einer Länge von 100 Pixeln dargestellt wird.

Fixierter/bewegter Cursor: Es gibt zwei Arten, wie der Cursor im Blickfeld bleibt. Auf langsameren Systemen ist die Wiedergabe mit einem bewegten Cursor vermutlich flüssiger.

Zeitskala anzeigen: Schaltet die Zeitskala an oder aus.
Steuerung

Bei Pause zurückspulen: Parlatype spult bei jeder Wiedergabeunterbrechung einige Sekunden zurück, auf diese Weise können Sie Ihre Arbeit leichter wiederaufnehmen. Setzen Sie diesen Wert auf 0, wenn Sie dieses Verhalten nicht wünschen.

Zurückspringen: Legt fest, wie viele Sekunden übersprungen werden sollen, wenn der Zurückspringen-Knopf gedrückt wird.

Vorwärts springen: Legt fest, wie viele Sekunden übersprungen werden, wenn der Vorwärts springen-Knopf gedrückt wird.
Fenster

Größe des Fensters merken: Beim Starten stellt Parlatype die Fenstergröße so ein, wie sie beim letzten Mal war.

Position des Fensters merken: Beim Starten kann Parlatype das Fenster dort positionieren, wo es sich befand, als Sie Parlatype das letzte Mal geschlossen haben.

»Immer im Vordergrund« starten: Dadurch wird Parlatype beim Starten über andere Fenster in den Vordergrund gelegt. Das kann nützlich sein, wenn Sie mit einer maximierten Textverarbeitung arbeiten und trotzdem das Parlatype-Fenster sehen wollen.

Position des Fensters merken und »Immer im Vordergrund« starten sind unter Wayland nicht verfügbar.
parlatype-1.5.4/help/de/de.stamp0000644000175000017500000000000013204122226013401 00000000000000parlatype-1.5.4/help/de/index.page0000644000175000017500000000214013204122226013717 00000000000000 Parlatype Parlatype Gabor Karsay gabor.karsay@gmx.at Parlatype ist ein einfach zu bedienender Medienspieler. Er dient hauptsächlich dazu, Sie beim Transkribieren von gesprochener Sprache zu unterstützen. <media type="image" mime="image/png" src="figures/parlatype-icon.png" its:translate="no"/> Parlatype

Parlatype ist ein einfach zu bedienender Medienspieler. Er dient hauptsächlich dazu, Sie beim Transkribieren von gesprochener Sprache zu unterstützen.

Für einen schnellen Überblick gehen Sie zu . Andere Themen sind weiter unten behandelt.

Hilfethemen
parlatype-1.5.4/help/de/drag-and-drop.page0000644000175000017500000000333113204122226015232 00000000000000 Dateien, Dateinamen oder Zeitstempel auf Parlatype ablegen Gabor Karsay gabor.karsay@gmx.at Ziehen und ablegen

Sie können Dateien, Dateinamen oder Zeitstempel auf dem Parlatype-Fenster ablegen.

Dateien: Ziehen Sie eine Datei aus einem Dateimanager, wie zum Beispiel Dateien, auf das Parlatype-Fenster und Parlatype wird diese Datei öffnen.

Dateinamen: Markieren Sie einen Dateinamen in Ihrer Textverarbeitung, wie zum Beispiel LibreOffice, ziehen Sie ihn ins Parlatype-Fenster, und die Datei wird geöffnet. Das funktioniert immer, wenn die Markierung einen vollständigen Dateipfad enthält. Wenn Sie nur einen Dateinamen markiert haben, vergleicht Parlatype diesen Namen mit den Einträgen in der Liste der zuletzt benützten Dateien und wenn es dort den vollen Pfad findet, öffnet es die Datei.

Zeitstempel: Sie können Zeitstempel in beide Richtungen ziehen und ablegen. Markieren Sie einen Zeitstempel in Ihrer Textverarbeitung, wie zum Beispiel LibreOffice, ziehen Sie ihn ins Parlatype-Fenster und das Programm springt zur Position des Zeitstempels. Oder Sie klicken auf die Zeitanzeige in Parlatype und ziehen sie in die Textverarbeitung, um den Zeitstempel dort einzufügen.

 parlatype-1.5.4/help/de/media-keys.page0000644000175000017500000000416413204122226014650 00000000000000 Parlatype mit Medientasten steuern Gabor Karsay gabor.karsay@gmx.at Medientasten

Parlatypes grundlegende Funktionen können mit den sogenannten Medientasten gesteuert werden. Medientasten werden systemweit verwendet, um Medienspieler zu steuern, und sie funktionieren selbst dann, wenn der Medienspieler nicht im Fokus oder im Hintergrund ist.

Sie können die Medientasten in den Einstellungen von GNOME ändern. Sie können entweder dezidierte Tasten von einer Multimediatastatur verwenden oder eine beliebige andere Taste oder Tastenkombination zuweisen.

Das wirkt sich auch auf andere Medienspieler aus, wie zum Beispiel Totem oder Rhythmbox.

Parlatype reagiert auf diese Tastenanschläge:

Wiedergabe, Wiedergabe unterbrechen, Wiedergabe anhalten: Jede dieser Tasten schaltet zwischen Wiedergabe und Pause um.

Zurückspulen, Vorheriger Titel: Jede dieser Tasten wird um so viele Sekunden zurückspringen, wie Sie in den Einstellungen eingestellt haben.

Vorspulen, Nächster Titel: Jede dieser Tasten wird so viele Sekunden vorwärtsspringen, wie Sie in den Einstellungen eingestellt haben.

Für eine genaue Anleitung, wie Sie die Tastenkürzel in GNOME ändern können, sehen Sie bitte in der offiziellen Dokumentation nach.

Wenn Sie ein Fußpedal für die Transkription verwenden, müsste es möglich sein, die Fußpedalsignale den entsprechenden Tasten zuzuweisen. Das ist aber noch nicht ausgiebig getestet worden. Rückmeldungen dazu sind willkommen.

 parlatype-1.5.4/help/de/timestamps.page0000644000175000017500000000335013204122226015002 00000000000000 Zeitstempel setzen und hinspringen Gabor Karsay gabor.karsay@gmx.at Zeitstempel

Zeitstempel helfen Ihnen beim Navigieren in Ihrer Transkription.

Zeitstempel sehen so aus: #03:45.2#. Sie können Sie mit oder ohne die Rautezeichen markieren.
Ziehen und ablegen

Wenn Sie einen Zeitstempel in Ihrer Textverarbeitung markieren, können Sie ihn mit der Maus ins Parlatype-Fenster hinüberziehen und das Programm wird zu dieser Position springen. Das ist auch andersrum möglich: Ziehen Sie die Zeitanzeige aus dem Parlatype-Fenster in die Textverarbeitung, um den Zeitstempel dort einzufügen.

Mithilfe der Zwischenablage

Stellen Sie zuerst sicher, dass das Parlatype-Fenster den Eingabefokus hat. Mit der Tastenkombination Ctrlc können Sie den aktuellen Zeitstempel in die Zwischenablage kopieren. Wenn Sie nun zu Ihrer Textverarbeitung wechseln, können Sie den Zeitstempel aus der Zwischenablage einfügen.

Um zur Zeitstempel-Position zu springen, kopieren Sie den Zeitstempel in Ihrer Textverarbeitung in die Zwischenablage. Sobald Sie den Eingabefokus zu Parlatype gewechselt haben, drücken Sie Strgv.

 parlatype-1.5.4/help/de/legal.xml0000644000175000017500000000054413204122226013566 00000000000000

Dieses Werk ist unter Creative Commons Namensnennung – Weitergabe unter gleichen Bedingungen 4.0 International lizenziert.

 parlatype-1.5.4/help/it/0000755000175000017500000000000013204324054012064 500000000000000parlatype-1.5.4/help/it/it.po0000644000175000017500000005546413176574164013017 00000000000000# Italian translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Luca Ciavatta , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-01-26 22:49+0100\n" "PO-Revision-Date: 2017-01-18 08:46+0000\n" "Last-Translator: Luca Ciavatta \n" "Language-Team: Italian \n" "Language: it\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-01-26 11:32+0000\n" "X-Generator: Launchpad (build 18315)\n" #. Put one translator per line, in the form NAME , YEAR1, YEAR2 msgctxt "_" msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Luca Ciavatta https://launchpad.net/~cialu" #. (itstool) path: info/title #: C/index.page:7 msgctxt "text" msgid "Parlatype" msgstr "Parlatype" #. (itstool) path: info/title #: C/index.page:8 msgctxt "link" msgid "Parlatype" msgstr "Parlatype" #. (itstool) path: credit/name #: C/index.page:10 C/drag-and-drop.page:8 C/first-steps.page:8 #: C/keyboard-shortcuts.page:8 C/libreoffice-helpers.page:9 #: C/media-keys.page:8 C/preferences.page:8 C/selections.page:8 #: C/timestamps.page:8 msgid "Gabor Karsay" msgstr "Gabor Karsay" #. (itstool) path: info/desc #. (itstool) path: page/p #: C/index.page:14 C/index.page:23 msgid "" "Parlatype is an easy to use media player. Its main purpose is to " "help you transcribing speech." msgstr "" "Parlatype è un lettore multimediale facile da usare. Il suo scopo " "principale è quello di aiutare a trascrivere il parlato." #. (itstool) path: page/title #: C/index.page:18 msgid "<_:media-1/> Parlatype" msgstr "<_:media-1/> Parlatype" #. (itstool) path: page/p #: C/index.page:24 msgid "" "For a quick overview have a look at . Other " "topics are covered below." msgstr "" "Per una rapida panoramica dare un'occhiata a . " "Altri argomenti sono trattati di seguito." #. (itstool) path: section/title #: C/index.page:27 msgid "Help topics" msgstr "Argomenti dell'Aiuto" #. (itstool) path: info/desc #: C/drag-and-drop.page:6 msgid "Drop files, file names or timestamps on Parlatype" msgstr "Rilascia file, nomi di file o marchi temporali su Parlatype" #. (itstool) path: page/title #: C/drag-and-drop.page:14 msgid "Drag and Drop" msgstr "Trascina e rilascia" #. (itstool) path: page/p #: C/drag-and-drop.page:16 msgid "" "You can drop files, file names or timestamps on Parlatype's " "window." msgstr "" "È possibile rilasciare file, nomi di file o marchi temporali sulla finestra " "di Parlatype" #. (itstool) path: item/p #: C/drag-and-drop.page:19 msgid "" "Files: Drag and drop a file from a file manager, e.g. Files, on " "Parlatype and it will open that file." msgstr "" #. (itstool) path: item/p #: C/drag-and-drop.page:20 msgid "" "File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that " "file. This will always work if the selection contains a full path. If you " "select the name only, Parlatype will look up its full path in the " "list of recent files and open it if it can find it in that list." msgstr "" #. (itstool) path: item/p #: C/drag-and-drop.page:21 msgid "" "Timestamps: You can drag and drop timestamps in both directions. Select a " "timestamp from a word processor, e.g. LibreOffice, drop the " "selected text on Parlatype and it will jump to that position. Or " "you click on Parlatype's time label and drag it to a word " "processor to insert it there." msgstr "" #. (itstool) path: info/desc #. (itstool) path: page/title #: C/first-steps.page:6 C/first-steps.page:14 msgid "First steps with Parlatype" msgstr "Primi passi con Parlatype" #. (itstool) path: page/p #: C/first-steps.page:16 msgid "" "Parlatype is an easy to use audio player to help you transcribing " "or annotating recorded speech. You need to run a word processor, e.g. " "LibreOffice, too. Launch Parlatype and open an audio " "file by clicking on the Open button in the upper left corner." msgstr "" #. (itstool) path: note/p #: C/first-steps.page:19 msgid "" "You can also drag and drop a file on Parlatype or open the " "recently used files in the Application menu." msgstr "" "È possibile anche trascinare i file su Parlatype oppure aprire i " "file utilizzati di recente dal menu dell'applicazione." #. (itstool) path: page/p #: C/first-steps.page:22 msgid "" "Now in the upper left corner there is a Play button which toggles " "between play and pause. Whenever you pause, Parlatype rewinds a " "few seconds to make it easier to resume. This can be changed in the ." msgstr "" #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/first-steps.page:24 msgctxt "_" msgid "" "external ref='figures/parlatype-main-window.png' " "md5='1e21a2ddc61fda06238b6b1537191cb3'" msgstr "" #. (itstool) path: page/p #: C/first-steps.page:26 msgid "" "The buttons Jump back and Jump forward in the lower " "left corner skip a few seconds back or ahead. The amount of time can be " "changed in the ." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:28 msgid "" "The view scrolls automatically so that the cursor is always visible. You can " "scroll manually by clicking on or dragging the scroll bar or using the " "standard keybindings. Automatic scrolling is stopped then." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:30 msgid "" "To get back to the cursor's position and let the view scroll automatically " "again, click on the Go to button next to the time label. Clicking " "on the Play button also turns automatic scrolling on." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:32 msgid "" "Clicking in the view with the right mouse button will put the cursor there, " "also holding the right mouse button pressed and moving it. The left mouse " "button is for ." msgstr "" #. (itstool) path: page/p #: C/first-steps.page:34 msgid "" "The speed scale next to the volume button in the lower " "right corner lets you adjust the speed of playback. A value of 1 means " "normal speed, everything lower (down to 0.5) is slower, everything above is " "faster." msgstr "" #. (itstool) path: info/desc #: C/keyboard-shortcuts.page:6 msgid "Standard keyboard shortcuts in Parlatype" msgstr "Scorciatoie da tastiera standard in Parlatype" #. (itstool) path: page/title #: C/keyboard-shortcuts.page:14 msgid "Keyboard shortcuts" msgstr "Scorciatoie da tastiera" #. (itstool) path: page/p #: C/keyboard-shortcuts.page:16 msgid "" "Keyboard shortcuts for Parlatype control, like Play, " "are described in . Shortcut keys for the window are " "listed below." msgstr "" #. (itstool) path: table/title #: C/keyboard-shortcuts.page:19 msgid "Standard Shortcut keys" msgstr "Scorciatoie da tastiera standard" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:22 msgid "To Do This" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:23 msgid "Press This" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:28 msgid "Show help" msgstr "Mostra l'aiuto" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:29 msgid "F1" msgstr "F1" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:32 msgid "Open file" msgstr "Apri file" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:33 msgid "Ctrlo" msgstr "" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:36 msgid "Open recent files" msgstr "Apri file recenti" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:37 msgid "Ctrlr" msgstr "Ctrlr" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:40 msgid "Go to …" msgstr "Vai a ..." #. (itstool) path: td/p #: C/keyboard-shortcuts.page:41 msgid "Ctrlg" msgstr "Ctrlg" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:44 msgid "Copy timestamp" msgstr "Copia marca temporale" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:45 msgid "Ctrlc" msgstr "Ctrlc" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:48 msgid "Insert timestamp" msgstr "Inserisci marca temporale" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:49 msgid "Ctrlv" msgstr "Ctrlv" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:52 msgid "Quit" msgstr "Esci" #. (itstool) path: td/p #: C/keyboard-shortcuts.page:53 msgid "Ctrlq" msgstr "Ctrlq" #. (itstool) path: p/link #: C/legal.xml:5 msgid "Creative Commons Attribution-ShareAlike 4.0 International" msgstr "Creative Commons Attribution-ShareAlike 4.0 International" #. (itstool) path: license/p #: C/legal.xml:4 msgid "This work is licensed under a <_:link-1/> license." msgstr "Questo lavoro è rilasciato sotto licenza <_:link-1/>." #. (itstool) path: info/desc #: C/libreoffice-helpers.page:7 msgid "Use Parlatype with LibreOffice" msgstr "Utilizzare Parlatype con LibreOffice" #. (itstool) path: page/title #. (itstool) path: table/title #: C/libreoffice-helpers.page:15 C/libreoffice-helpers.page:30 msgid "LibreOffice Helpers" msgstr "" #. (itstool) path: page/p #: C/libreoffice-helpers.page:17 msgid "" "LibreOffice Helpers let you control Parlatype from " "LibreOffice. For example, you can jump easily to timestamps." msgstr "" #. (itstool) path: page/p #: C/libreoffice-helpers.page:19 msgid "" "To use them, you have to assign keyboard shortcuts in LibreOffice " "itself. To do this, open LibreOffice, go to menu Tools " "and select Customize." msgstr "" #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/libreoffice-helpers.page:21 msgctxt "_" msgid "" "external ref='figures/lo-menu.png' md5='4dd86affb0353b6bdfa2dcfbbeadd494'" msgstr "" #. (itstool) path: page/p #: C/libreoffice-helpers.page:23 msgid "" "Go to tab Keyboard. In the lower part, Functions, " "there is a list called Category. At the end of that list you'll " "find the entry LibreOffice Macros. There is a subcategory " "share which has a subcategory Parlatype. After " "selecting Parlatype there will be a list of functions in the " "Functions list. Choose the function you'd like to use, select " "from the list Shortcut keys above a shortcut and click on the " "button Modify." msgstr "" #. (itstool) path: page/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/libreoffice-helpers.page:25 msgctxt "_" msgid "" "external ref='figures/lo-customize.png' " "md5='081564921275129bee7bbd10220547e7'" msgstr "" #. (itstool) path: page/p #: C/libreoffice-helpers.page:27 msgid "You can select any of these functions:" msgstr "È possibile selezionare le seguenti funzioni:" #. (itstool) path: td/p #: C/libreoffice-helpers.page:33 msgid "Helper's name" msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:34 msgid "What it does" msgstr "Che cosa fa" #. (itstool) path: td/p #: C/libreoffice-helpers.page:40 msgid "" "Toggles between play and pause. Depending on your preferences set in " "Parlatype it will rewind a few seconds on pause." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:44 msgid "" "Jumps back a few seconds, depending on the preferences you set in " "Parlatype." msgstr "" "Indietro di qualche secondo, dipende dalle preferenze impostate in " "Parlatype." #. (itstool) path: td/p #: C/libreoffice-helpers.page:48 msgid "" "Jumps forward a few seconds, depending on the preferences you set in " "Parlatype." msgstr "" "Avanti di qualche secondo, dipende dalle preferenze impostate in " "Parlatype." #. (itstool) path: td/p #: C/libreoffice-helpers.page:52 msgid "" "Inserts the current timestamp at the cursor's position. It does not " "overwrite any selection." msgstr "" "Inserisce la marca temporale alla posizione corrente del cursore. Non " "sovrascrive alcuna selezione." #. (itstool) path: td/p #: C/libreoffice-helpers.page:56 msgid "The same as above, but on a new line." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:60 msgid "" "If the cursor is set on a timestamp, it will jump to that position. The " "cursor has to be somewhere between the two number signs (#). Don't select " "the timestamp, just put the cursor inside." msgstr "" #. (itstool) path: td/p #: C/libreoffice-helpers.page:64 msgid "Increases playback speed." msgstr "Aumenta la velocità di riproduzione." #. (itstool) path: td/p #: C/libreoffice-helpers.page:68 msgid "Decreases playback speed." msgstr "Diminuisce la velocità di riproduzione." #. (itstool) path: info/desc #: C/media-keys.page:6 msgid "How to control Parlatype with media keys" msgstr "Come controllare Parlatype con i tasti multimediali" #. (itstool) path: page/title #: C/media-keys.page:14 msgid "Media keys" msgstr "Tasti multimediali" #. (itstool) path: page/p #: C/media-keys.page:16 msgid "" "Parlatype's basic functions can be controlled with so called " "media keys. Media keys are used system wide to control media " "players and they are working even if the media player is not in focus or in " "the background." msgstr "" #. (itstool) path: page/p #: C/media-keys.page:18 msgid "" "You can change the media keys in GNOME settings. You can use dedicated keys " "from a multimedia keyboard or use any other key or combination of keys." msgstr "" #. (itstool) path: note/p #: C/media-keys.page:21 msgid "" "This will affect other media players, e.g. Totem or " "Rhythmbox, as well." msgstr "" #. (itstool) path: page/p #: C/media-keys.page:24 msgid "Parlatype listens to these key strokes:" msgstr "" #. (itstool) path: item/p #: C/media-keys.page:26 msgid "" "Play, Pause, Stop: Each of these keys " "toggles between playing and pause." msgstr "" #. (itstool) path: item/p #: C/media-keys.page:27 msgid "" "Rewind, Previous: Each of these keys will jump back " "the time you selected in Preferences." msgstr "" #. (itstool) path: item/p #: C/media-keys.page:28 msgid "" "Fast Forward, Next: Each of these keys will jump ahead " "the time you selected in Preferences." msgstr "" #. (itstool) path: note/p #: C/media-keys.page:32 msgid "" "For detailed instructions how to change keyboard shortcuts in GNOME see the " "official " "documentation." msgstr "" #. (itstool) path: page/p #: C/media-keys.page:35 msgid "" "If you are using a dedicated foot pedal, it should be possible to map the " "foot pedal signals to any of the keys. This is not well tested, however. Any " "feedback regarding foot pedals is welcome." msgstr "" #. (itstool) path: info/desc #: C/preferences.page:6 msgid "How to customize Parlatype" msgstr "" #. (itstool) path: page/title #: C/preferences.page:14 msgid "Preferences" msgstr "" #. (itstool) path: page/p #: C/preferences.page:16 msgid "" "You can reach the preferences window in the Application Menu (next to " "Activities in the top left corner. There are three tabs: " "Waveform, Controls and Window." msgstr "" #. (itstool) path: section/title #: C/preferences.page:19 msgid "Waveform" msgstr "Forma d’onda" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:21 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-waveform.png' " "md5='e9d05960162dcdddab10378e21ce63da'" msgstr "" #. (itstool) path: item/p #: C/preferences.page:24 msgid "" "Resolution: The resolution of the waveform image is given in pixels per " "second, e.g. the default resolution of 100 means, that one second is shown " "with a width of 100 pixels." msgstr "" #. (itstool) path: item/p #: C/preferences.page:25 msgid "" "Fixed vs. moving cursor: There are two modes, how to follow the cursor. On " "slower systems a moving cursor might be smoother." msgstr "" #. (itstool) path: item/p #: C/preferences.page:26 msgid "Show time scale: Turn the time scale on or off." msgstr "" #. (itstool) path: section/title #: C/preferences.page:31 msgid "Controls" msgstr "Controlli" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:33 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-controls.png' " "md5='0b50614222d881110b176c2e28b7d18c'" msgstr "" #. (itstool) path: item/p #: C/preferences.page:36 msgid "" "Jump back on pause: Parlatype will rewind a few seconds on each " "pause, this way you can easier resume typing. Set this value to 0 if you " "don't want this behaviour." msgstr "" #. (itstool) path: item/p #: C/preferences.page:37 msgid "" "Jump back: Configures how many seconds to skip when the Jump back " "button is pressed." msgstr "" #. (itstool) path: item/p #: C/preferences.page:38 msgid "" "Jump forward: Configures how many seconds to skip when the Jump " "forward button is pressed." msgstr "" #. (itstool) path: section/title #: C/preferences.page:43 msgid "Window" msgstr "Finestra" #. (itstool) path: section/media #. This is a reference to an external file such as an image or video. When #. the file changes, the md5 hash will change to let you know you need to #. update your localized copy. The msgstr is not used at all. Set it to #. whatever you like once you have updated your copy of the file. #: C/preferences.page:45 msgctxt "_" msgid "" "external ref='figures/parlatype-prefs-window.png' " "md5='615d876529cdd45763e78a3ee01b7b3e'" msgstr "" #. (itstool) path: item/p #: C/preferences.page:48 msgid "" "Remember position: On start-up Parlatype can position its window " "where you had it when you closed Parlatype last time. This also " "remembers the window's size." msgstr "" #. (itstool) path: item/p #: C/preferences.page:49 msgid "" "Start on top: This will put Parlatype on start-up on top of other " "windows. This might be useful if you are working with a maximized word " "processor and still want to see the Parlatype window." msgstr "" #. (itstool) path: info/desc #: C/selections.page:6 msgid "How to play and repeat a selection" msgstr "Come avviare e ripetere una selezione" #. (itstool) path: page/title #: C/selections.page:14 msgid "Selections" msgstr "Selezioni" #. (itstool) path: page/p #: C/selections.page:16 msgid "" "You can select a piece of the waveform with the mouse. Next time you press " "Play, it will play the selection only. When it is finished and " "you press Play again, it will loop the selection once." msgstr "" #. (itstool) path: note/p #: C/selections.page:18 msgid "" "When in selection mode, you can not exit the selection anymore until you " "deselect it." msgstr "" #. (itstool) path: page/p #: C/selections.page:20 msgid "" "Selections can be made with the mouse (or pointer device) with a left click, " "holding the mouse button and dragging the pointer. If you click with " "Shift key pressed, an already existing selection will be enlarged " "to that point." msgstr "" #. (itstool) path: page/p #: C/selections.page:22 msgid "" "To deselect click once with the left button into the waveform. If the " "waveform has keyboard focus, you can press Escape." msgstr "" #. (itstool) path: info/desc #: C/timestamps.page:6 msgid "Set and go to timestamps" msgstr "" #. (itstool) path: page/title #: C/timestamps.page:14 msgid "Timestamps" msgstr "Marche temporali" #. (itstool) path: page/p #: C/timestamps.page:16 msgid "Timestamps help you to navigate in your transcription." msgstr "" #. (itstool) path: note/p #: C/timestamps.page:19 msgid "" "Timestamps look like this: #03:45.2#. You can select them with or without " "the number signs." msgstr "" #. (itstool) path: section/title #: C/timestamps.page:23 msgid "Drag and drop" msgstr "Trascina e rilascia" #. (itstool) path: section/p #: C/timestamps.page:25 msgid "" "If you select the timestamp in the word processor, you can drag and drop it " "on the Parlatype window and it will go to that position. This is " "also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it." msgstr "" #. (itstool) path: section/title #: C/timestamps.page:29 msgid "Using the clipboard" msgstr "" #. (itstool) path: section/p #: C/timestamps.page:31 msgid "" "First make sure, the Parlatype window has focus. With the key " "sequence Ctrlc the current timestamp " "is copied to the clipboard. Changing to the word processor you can insert " "now the timestamp in your transcription." msgstr "" #. (itstool) path: section/p #: C/timestamps.page:32 msgid "" "To go to a timestamp position, copy the timestamp in the word processor to " "the clipboard. Once you have changed focus to Parlatype press " "Ctrlv." msgstr "" parlatype-1.5.4/help/it/selections.page0000644000175000017500000000221613204122230015003 00000000000000 Come avviare e ripetere una selezione Gabor Karsay gabor.karsay@gmx.at Selezioni

You can select a piece of the waveform with the mouse. Next time you press Play, it will play the selection only. When it is finished and you press Play again, it will loop the selection once.

When in selection mode, you can not exit the selection anymore until you deselect it.

Selections can be made with the mouse (or pointer device) with a left click, holding the mouse button and dragging the pointer. If you click with Shift key pressed, an already existing selection will be enlarged to that point.

To deselect click once with the left button into the waveform. If the waveform has keyboard focus, you can press Escape.

 parlatype-1.5.4/help/it/it.stamp0000644000175000017500000000000013204122230013444 00000000000000parlatype-1.5.4/help/it/first-steps.page0000644000175000017500000000441213204122230015116 00000000000000 Primi passi con Parlatype Gabor Karsay gabor.karsay@gmx.at Primi passi con Parlatype

Parlatype is an easy to use audio player to help you transcribing or annotating recorded speech. You need to run a word processor, e.g. LibreOffice, too. Launch Parlatype and open an audio file by clicking on the Open button in the upper left corner.

È possibile anche trascinare i file su Parlatype oppure aprire i file utilizzati di recente dal menu dell'applicazione.

Now in the upper left corner there is a Play button which toggles between play and pause. Whenever you pause, Parlatype rewinds a few seconds to make it easier to resume. This can be changed in the .

The buttons Jump back and Jump forward in the lower left corner skip a few seconds back or ahead. The amount of time can be changed in the .

The view scrolls automatically so that the cursor is always visible. You can scroll manually by clicking on or dragging the scroll bar or using the standard keybindings. Automatic scrolling is stopped then.

To get back to the cursor's position and let the view scroll automatically again, click on the Go to button next to the time label. Clicking on the Play button also turns automatic scrolling on.

Clicking in the view with the right mouse button will put the cursor there, also holding the right mouse button pressed and moving it. The left mouse button is for .

The speed scale next to the volume button in the lower right corner lets you adjust the speed of playback. A value of 1 means normal speed, everything lower (down to 0.5) is slower, everything above is faster.

 parlatype-1.5.4/help/it/keyboard-shortcuts.page0000644000175000017500000000412013204122230016463 00000000000000 Scorciatoie da tastiera standard in Parlatype Gabor Karsay gabor.karsay@gmx.at Scorciatoie da tastiera

Keyboard shortcuts for Parlatype control, like Play, are described in . Shortcut keys for the window are listed below.

Scorciatoie da tastiera standard

To Do This

Press This

Mostra l'aiuto

F1

Apri file

Ctrlo

Apri file recenti

Ctrlr

Vai a ...

Ctrlg

Copia marca temporale

Ctrlc

Inserisci marca temporale

Ctrlv

Zoom in

Ctrl+

Zoom out

Ctrl-

Esci

Ctrlq
parlatype-1.5.4/help/it/libreoffice-helpers.page0000644000175000017500000000652313204122230016551 00000000000000 Utilizzare Parlatype con LibreOffice Gabor Karsay gabor.karsay@gmx.at LibreOffice Helpers

LibreOffice Helpers let you control Parlatype from LibreOffice. For example, you can jump easily to timestamps.

To use them, you have to assign keyboard shortcuts in LibreOffice itself. To do this, open LibreOffice, go to menu Tools and select Customize.

Go to tab Keyboard. In the lower part, Functions, there is a list called Category. At the end of that list you'll find the entry LibreOffice Macros. There is a subcategory share which has a subcategory Parlatype. After selecting Parlatype there will be a list of functions in the Functions list. Choose the function you'd like to use, select from the list Shortcut keys above a shortcut and click on the button Modify.

È possibile selezionare le seguenti funzioni:

LibreOffice Helpers

Helper's name

Che cosa fa

PlayPause

Toggles between play and pause. Depending on your preferences set in Parlatype it will rewind a few seconds on pause.

JumpBack

Indietro di qualche secondo, dipende dalle preferenze impostate in Parlatype.

JumpForward

Avanti di qualche secondo, dipende dalle preferenze impostate in Parlatype.

InsertTimestamp

Inserisce la marca temporale alla posizione corrente del cursore. Non sovrascrive alcuna selezione.

InsertTimestampOnNewLine

The same as above, but on a new line.

GotoTimestamp

If the cursor is set on a timestamp, it will jump to that position. The cursor has to be somewhere between the two number signs (#). Don't select the timestamp, just put the cursor inside.

IncreaseSpeed

Aumenta la velocità di riproduzione.

DecreaseSpeed

Diminuisce la velocità di riproduzione.
parlatype-1.5.4/help/it/preferences.page0000644000175000017500000000476613204122230015150 00000000000000 How to customize Parlatype Gabor Karsay gabor.karsay@gmx.at Preferences

You can reach the preferences window in the Application Menu (next to Activities in the top left corner. There are three tabs: Waveform, Controls and Window.

Forma d’onda

Resolution: The resolution of the waveform image is given in pixels per second, e.g. the default resolution of 100 means, that one second is shown with a width of 100 pixels.

Fixed vs. moving cursor: There are two modes, how to follow the cursor. On slower systems a moving cursor might be smoother.

Show time scale: Turn the time scale on or off.
Controlli

Jump back on pause: Parlatype will rewind a few seconds on each pause, this way you can easier resume typing. Set this value to 0 if you don't want this behaviour.

Jump back: Configures how many seconds to skip when the Jump back button is pressed.

Jump forward: Configures how many seconds to skip when the Jump forward button is pressed.
Finestra

Remember size: On start-up Parlatype sets the window size to the size it had the last time.

Remember position: On start-up Parlatype can position its window where you had it when you closed Parlatype last time.

Start on top: This will put Parlatype on start-up on top of other windows. This might be useful if you are working with a maximized word processor and still want to see the Parlatype window.

Remember position and Start on top are not available on Wayland.
parlatype-1.5.4/help/it/index.page0000644000175000017500000000206013204122230013737 00000000000000 Parlatype Parlatype Gabor Karsay gabor.karsay@gmx.at Parlatype è un lettore multimediale facile da usare. Il suo scopo principale è quello di aiutare a trascrivere il parlato. <media type="image" mime="image/png" src="figures/parlatype-icon.png" its:translate="no"/> Parlatype

Parlatype è un lettore multimediale facile da usare. Il suo scopo principale è quello di aiutare a trascrivere il parlato.

Per una rapida panoramica dare un'occhiata a . Altri argomenti sono trattati di seguito.

Argomenti dell'Aiuto
parlatype-1.5.4/help/it/drag-and-drop.page0000644000175000017500000000271213204122230015253 00000000000000 Rilascia file, nomi di file o marchi temporali su Parlatype Gabor Karsay gabor.karsay@gmx.at Trascina e rilascia

È possibile rilasciare file, nomi di file o marchi temporali sulla finestra di Parlatype

Files: Drag and drop a file from a file manager, e.g. Files, on Parlatype and it will open that file.

File names: Select a file name from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will open that file. This will always work if the selection contains a full path. If you select the name only, Parlatype will look up its full path in the list of recent files and open it if it can find it in that list.

Timestamps: You can drag and drop timestamps in both directions. Select a timestamp from a word processor, e.g. LibreOffice, drop the selected text on Parlatype and it will jump to that position. Or you click on Parlatype's time label and drag it to a word processor to insert it there.

 parlatype-1.5.4/help/it/media-keys.page0000644000175000017500000000345213204122230014666 00000000000000 Come controllare Parlatype con i tasti multimediali Gabor Karsay gabor.karsay@gmx.at Tasti multimediali

Parlatype's basic functions can be controlled with so called media keys. Media keys are used system wide to control media players and they are working even if the media player is not in focus or in the background.

You can change the media keys in GNOME settings. You can use dedicated keys from a multimedia keyboard or use any other key or combination of keys.

This will affect other media players, e.g. Totem or Rhythmbox, as well.

Parlatype listens to these key strokes:

Play, Pause, Stop: Each of these keys toggles between playing and pause.

Rewind, Previous: Each of these keys will jump back the time you selected in Preferences.

Fast Forward, Next: Each of these keys will jump ahead the time you selected in Preferences.

For detailed instructions how to change keyboard shortcuts in GNOME see the official documentation.

If you are using a dedicated foot pedal, it should be possible to map the foot pedal signals to any of the keys. This is not well tested, however. Any feedback regarding foot pedals is welcome.

 parlatype-1.5.4/help/it/timestamps.page0000644000175000017500000000301413204122230015016 00000000000000 Set and go to timestamps Gabor Karsay gabor.karsay@gmx.at Marche temporali

Timestamps help you to navigate in your transcription.

Timestamps look like this: #03:45.2#. You can select them with or without the number signs.
Trascina e rilascia

If you select the timestamp in the word processor, you can drag and drop it on the Parlatype window and it will go to that position. This is also possible the other way round: Drag the time label from Parlatype to a word processor and drop it there to insert it.

Using the clipboard

First make sure, the Parlatype window has focus. With the key sequence Ctrlc the current timestamp is copied to the clipboard. Changing to the word processor you can insert now the timestamp in your transcription.

To go to a timestamp position, copy the timestamp in the word processor to the clipboard. Once you have changed focus to Parlatype press Ctrlv.

 parlatype-1.5.4/help/it/legal.xml0000644000175000017500000000051413204122230013602 00000000000000

Questo lavoro è rilasciato sotto licenza Creative Commons Attribution-ShareAlike 4.0 International.

 parlatype-1.5.4/help/Makefile.am0000644000175000017500000000122413176574164013444 00000000000000@YELP_HELP_RULES@ HELP_ID = com.github.gkarsay.parlatype HELP_MEDIA = \ figures/parlatype-icon.png \ figures/parlatype-prefs-controls.png \ figures/parlatype-prefs-waveform.png \ figures/parlatype-prefs-window.png \ figures/parlatype-main-window.png HELP_FILES = \ index.page \ drag-and-drop.page \ first-steps.page \ keyboard-shortcuts.page \ legal.xml \ media-keys.page \ preferences.page \ selections.page \ timestamps.page if LIBREOFFICE HELP_MEDIA += \ figures/lo-customize.png \ figures/lo-menu.png HELP_FILES += \ libreoffice-helpers.page endif HELP_LINGUAS = de en_GB es he id it lt ku pt parlatype-1.5.4/configure0000755000175000017500000234114313204324007012355 00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.69 for parlatype 1.5.4. # # Report bugs to . # # # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. # # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # Use a proper internal environment variable to ensure we don't fall # into an infinite loop, continuously re-executing ourselves. if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then _as_can_reexec=no; export _as_can_reexec; # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 as_fn_exit 255 fi # We don't want this to propagate to other subprocesses. { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : else exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1 test -x / || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO PATH=/empty FPATH=/empty; export PATH FPATH test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1 test \$(( 1 + 1 )) = 2 || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir/$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : CONFIG_SHELL=$as_shell as_have_required=yes if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : break 2 fi fi done;; esac as_found=false done $as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : CONFIG_SHELL=$SHELL as_have_required=yes fi; } IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : export CONFIG_SHELL # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 fi if test x$as_have_required = xno; then : $as_echo "$0: This script requires a shell more modern than all" $as_echo "$0: the shells that I found on your system." if test x${ZSH_VERSION+set} = xset ; then $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" $as_echo "$0: be upgraded to zsh 4.3.4 or later." else $as_echo "$0: Please tell bug-autoconf@gnu.org and $0: https://github.com/gkarsay/parlatype/issues about your $0: system, including any error possibly output before this $0: message. Then install a modern shell, or manually run $0: the script under such a shell if you do have one." fi exit 1 fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # If we had to re-execute with $CONFIG_SHELL, we're ensured to have # already done that, so ensure we don't try to do so again and fall # in an infinite loop. This has already happened in practice. _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" SHELL=${CONFIG_SHELL-/bin/sh} test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME='parlatype' PACKAGE_TARNAME='parlatype' PACKAGE_VERSION='1.5.4' PACKAGE_STRING='parlatype 1.5.4' PACKAGE_BUGREPORT='https://github.com/gkarsay/parlatype/issues' PACKAGE_URL='https://gkarsay.github.io/parlatype/' ac_unique_file="src/main.c" # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" enable_option_checking=no ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS LIBOBJS subdirs GTK_DOC_USE_REBASE_FALSE GTK_DOC_USE_REBASE_TRUE GTK_DOC_USE_LIBTOOL_FALSE GTK_DOC_USE_LIBTOOL_TRUE GTK_DOC_BUILD_PDF_FALSE GTK_DOC_BUILD_PDF_TRUE GTK_DOC_BUILD_HTML_FALSE GTK_DOC_BUILD_HTML_TRUE ENABLE_GTK_DOC_FALSE ENABLE_GTK_DOC_TRUE HAVE_GTK_DOC_FALSE HAVE_GTK_DOC_TRUE GTKDOC_DEPS_LIBS GTKDOC_DEPS_CFLAGS HTML_DIR GTKDOC_MKPDF GTKDOC_REBASE GTKDOC_CHECK_PATH GTKDOC_CHECK LIBREOFFICE_FALSE LIBREOFFICE_TRUE WARNINGCFLAGS GTK_LIBS GTK_CFLAGS YELP_HELP_RULES XMLLINT ITSTOOL HELP_DIR YELP_LC_DIST YELP_LC_MEDIA_LINKS APPDATA_VALIDATE DESKTOP_FILE_VALIDATE GLIB_COMPILE_RESOURCES GSETTINGS_RULES GLIB_COMPILE_SCHEMAS gsettingsschemadir PKG_CONFIG_LIBDIR PKG_CONFIG_PATH PKG_CONFIG GSETTINGS_DISABLE_SCHEMAS_COMPILE CXXCPP am__fastdepCXX_FALSE am__fastdepCXX_TRUE CXXDEPMODE ac_ct_CXX CXXFLAGS CXX CPP OTOOL64 OTOOL LIPO NMEDIT DSYMUTIL MANIFEST_TOOL RANLIB ac_ct_AR AR DLLTOOL OBJDUMP LN_S NM ac_ct_DUMPBIN DUMPBIN LD FGREP EGREP GREP SED host_os host_vendor host_cpu host build_os build_vendor build_cpu build LIBTOOL DATADIRNAME am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE am__nodep AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE am__quote am__include DEPDIR OBJEXT EXEEXT ac_ct_CC CPPFLAGS LDFLAGS CFLAGS CC ALL_LINGUAS INTLTOOL_PERL GMSGFMT MSGFMT MSGMERGE XGETTEXT INTLTOOL_POLICY_RULE INTLTOOL_SERVICE_RULE INTLTOOL_THEME_RULE INTLTOOL_SCHEMAS_RULE INTLTOOL_CAVES_RULE INTLTOOL_XML_NOMERGE_RULE INTLTOOL_XML_RULE INTLTOOL_KBD_RULE INTLTOOL_XAM_RULE INTLTOOL_UI_RULE INTLTOOL_SOUNDLIST_RULE INTLTOOL_SHEET_RULE INTLTOOL_SERVER_RULE INTLTOOL_PONG_RULE INTLTOOL_OAF_RULE INTLTOOL_PROP_RULE INTLTOOL_KEYS_RULE INTLTOOL_DIRECTORY_RULE INTLTOOL_DESKTOP_RULE intltool__v_merge_options_0 intltool__v_merge_options_ INTLTOOL_V_MERGE_OPTIONS INTLTOOL__v_MERGE_0 INTLTOOL__v_MERGE_ INTLTOOL_V_MERGE INTLTOOL_EXTRACT INTLTOOL_MERGE INTLTOOL_UPDATE USE_NLS GETTEXT_PACKAGE AM_BACKSLASH AM_DEFAULT_VERBOSITY AM_DEFAULT_V AM_V am__untar am__tar AMTAR am__leading_dot SET_MAKE AWK mkdir_p MKDIR_P INSTALL_STRIP_PROGRAM STRIP install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking enable_silent_rules enable_nls enable_dependency_tracking enable_static enable_shared with_pic enable_fast_install with_gnu_ld with_sysroot enable_libtool_lock enable_schemas_compile with_help_dir with_libreoffice with_html_dir enable_gtk_doc enable_gtk_doc_html enable_gtk_doc_pdf ' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS CPP CXX CXXFLAGS CCC CXXCPP PKG_CONFIG PKG_CONFIG_PATH PKG_CONFIG_LIBDIR ITSTOOL XMLLINT GTK_CFLAGS GTK_LIBS GTKDOC_DEPS_CFLAGS GTKDOC_DEPS_LIBS' ac_subdirs_all='libparlatype' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *=) ac_optarg= ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error $? "unrecognized option: \`$ac_option' Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures parlatype 1.5.4 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/parlatype] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of parlatype 1.5.4:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-silent-rules less verbose build output (undo: "make V=1") --disable-silent-rules verbose build output (undo: "make V=0") --disable-nls do not use Native Language Support --enable-dependency-tracking do not reject slow dependency extractors --disable-dependency-tracking speeds up one-time build --enable-static[=PKGS] build static libraries [default=no] --enable-shared[=PKGS] build shared libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) --disable-schemas-compile Disable regeneration of gschemas.compiled on install --enable-gtk-doc use gtk-doc to build documentation [[default=no]] --enable-gtk-doc-html build documentation in html format [[default=yes]] --enable-gtk-doc-pdf build documentation in pdf format [[default=no]] Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use both] --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-sysroot=DIR Search for dependent libraries within DIR (or the compiler's sysroot if not specified). --with-help-dir=DIR path where help files are installed --without-libreoffice don't install LibreOffice macros --with-html-dir=PATH path to installed docs Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor CXX C++ compiler command CXXFLAGS C++ compiler flags CXXCPP C++ preprocessor PKG_CONFIG path to pkg-config utility PKG_CONFIG_PATH directories to add to pkg-config's search path PKG_CONFIG_LIBDIR path overriding pkg-config's built-in search path ITSTOOL Path to the `itstool` command XMLLINT Path to the `xmllint` command GTK_CFLAGS C compiler flags for GTK, overriding pkg-config GTK_LIBS linker flags for GTK, overriding pkg-config GTKDOC_DEPS_CFLAGS C compiler flags for GTKDOC_DEPS, overriding pkg-config GTKDOC_DEPS_LIBS linker flags for GTKDOC_DEPS, overriding pkg-config Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to . parlatype home page: . _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF parlatype configure 1.5.4 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## # ac_fn_c_try_compile LINENO # -------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_compile # ac_fn_c_try_link LINENO # ----------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || test -x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_link # ac_fn_c_check_func LINENO FUNC VAR # ---------------------------------- # Tests whether FUNC exists, setting the cache variable VAR accordingly ac_fn_c_check_func () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Define $2 to an innocuous variant, in case declares $2. For example, HP-UX 11i declares gettimeofday. */ #define $2 innocuous_$2 /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $2 (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $2 /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $2 (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$2 || defined __stub___$2 choke me #endif int main () { return $2 (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_func # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in # INCLUDES, setting the cache variable VAR accordingly. ac_fn_c_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_compile # ac_fn_c_try_cpp LINENO # ---------------------- # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } > conftest.i && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_cpp # ac_fn_c_try_run LINENO # ---------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. Assumes # that executables *can* be run. ac_fn_c_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then : ac_retval=0 else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=$ac_status fi rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_run # ac_fn_cxx_try_compile LINENO # ---------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_cxx_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_cxx_try_compile # ac_fn_cxx_try_cpp LINENO # ------------------------ # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_cxx_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } > conftest.i && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_cxx_try_cpp # ac_fn_cxx_try_link LINENO # ------------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_cxx_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || test -x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_cxx_try_link # ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists, giving a warning if it cannot be compiled using # the include files in INCLUDES and setting the cache variable VAR # accordingly. ac_fn_c_check_header_mongrel () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if eval \${$3+:} false; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 $as_echo_n "checking $2 usability... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_header_compiler=yes else ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 $as_echo_n "checking $2 presence... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <$2> _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : ac_header_preproc=yes else ac_header_preproc=no fi rm -f conftest.err conftest.i conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( yes:no: ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ;; no:yes:* ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ( $as_echo "## ---------------------------------------------------------- ## ## Report this to https://github.com/gkarsay/parlatype/issues ## ## ---------------------------------------------------------- ##" ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else eval "$3=\$ac_header_compiler" fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_mongrel cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by parlatype $as_me 1.5.4, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo $as_echo "## ---------------- ## ## Cache variables. ## ## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo $as_echo "## ----------------- ## ## Output variables. ## ## ----------------- ##" echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then $as_echo "## ------------------- ## ## File substitutions. ## ## ------------------- ##" echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then $as_echo "## ----------- ## ## confdefs.h. ## ## ----------- ##" echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h $as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_URL "$PACKAGE_URL" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then # We do not want a PATH search for config.site. case $CONFIG_SITE in #(( -*) ac_site_file1=./$CONFIG_SITE;; */*) ac_site_file1=$CONFIG_SITE;; *) ac_site_file1=./$CONFIG_SITE;; esac elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" \ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "failed to load site script $ac_site_file See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special files # actually), so we avoid doing that. DJGPP emulates it as a regular file. if test /dev/null != "$cache_file" && test -f "$cache_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu am__api_version='1.14' ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if ${ac_cv_path_install+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in #(( ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". as_fn_error $? "ls -t appears to fail. Make sure there is not a broken alias in your environment" "$LINENO" 5 fi if test "$2" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$2" = conftest.file ) then # Ok. : else as_fn_error $? "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi rm -f conftest.file test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # Expand $ac_aux_dir to an absolute path. am_aux_dir=`cd "$ac_aux_dir" && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if ${ac_cv_path_mkdir+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi test -d ./--version && rmdir ./--version if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. MKDIR_P="$ac_install_sh -d" fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_AWK+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering ...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null # Check whether --enable-silent-rules was given. if test "${enable_silent_rules+set}" = set; then : enableval=$enable_silent_rules; fi case $enable_silent_rules in # ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=1;; esac am_make=${MAKE-make} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 $as_echo_n "checking whether $am_make supports nested variables... " >&6; } if ${am_cv_make_support_nested_variables+:} false; then : $as_echo_n "(cached) " >&6 else if $as_echo 'TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 $as_echo "$am_cv_make_support_nested_variables" >&6; } if test $am_cv_make_support_nested_variables = yes; then AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AM_BACKSLASH='\' if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE='parlatype' VERSION='1.5.4' cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # mkdir_p='$(MKDIR_P)' # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AMTAR='$${TAR-tar}' # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar pax cpio none' am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' # POSIX will say in a future version that running "rm -f" with no argument # is OK; and we want to be able to make that assumption in our Makefile # recipes. So use an aggressive probe to check that the usage we want is # actually supported "in the wild" to an acceptable degree. # See automake bug#10828. # To make any issue more visible, cause the running configure to be aborted # by default if the 'rm' program in use doesn't match our expectations; the # user can still override this though. if rm -f && rm -fr && rm -rf; then : OK; else cat >&2 <<'END' Oops! Your 'rm' program seems unable to run without file operands specified on the command line, even when the '-f' option is present. This is contrary to the behaviour of most rm programs out there, and not conforming with the upcoming POSIX standard: Please tell bug-automake@gnu.org about your system, including the value of your $PATH and any error possibly output before this message. This can help us improve future automake versions. END if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then echo 'Configuration will proceed anyway, since you have set the' >&2 echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 echo >&2 else cat >&2 <<'END' Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation that behaves properly: . If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM to "yes", and re-run configure. END as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 fi fi ac_config_headers="$ac_config_headers config.h" GETTEXT_PACKAGE=parlatype { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5 $as_echo_n "checking whether NLS is requested... " >&6; } # Check whether --enable-nls was given. if test "${enable_nls+set}" = set; then : enableval=$enable_nls; USE_NLS=$enableval else USE_NLS=yes fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 $as_echo "$USE_NLS" >&6; } DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from 'make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 $as_echo_n "checking whether the C compiler works... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi if test -z "$ac_file"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error 77 "C compiler cannot create executables See \`config.log' for more details" "$LINENO" 5; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 $as_echo_n "checking for C compiler default output file name... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of executables: cannot compile and link See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { FILE *f = fopen ("conftest.out", "w"); return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF ac_clean_files="$ac_clean_files conftest.out" # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } if test "$cross_compiling" != yes; then { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if { ac_try='./conftest$ac_cv_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details" "$LINENO" 5; } fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if ${ac_cv_objext+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of object files: cannot compile See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 $as_echo_n "checking whether $CC understands -c and -o together... " >&6; } if ${am_cv_prog_cc_c_o+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done rm -f core conftest* unset am_i fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 $as_echo "$am_cv_prog_cc_c_o" >&6; } if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if ${am_cv_CC_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi case "$am__api_version" in 1.01234) as_fn_error $? "Automake 1.5 or newer is required to use intltool" "$LINENO" 5 ;; *) ;; esac INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.50.2 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` if test -n "0.50.2"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for intltool >= 0.50.2" >&5 $as_echo_n "checking for intltool >= 0.50.2... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_APPLIED_VERSION found" >&5 $as_echo "$INTLTOOL_APPLIED_VERSION found" >&6; } test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || as_fn_error $? "Your intltool is too old. You need intltool 0.50.2 or later." "$LINENO" 5 fi # Extract the first word of "intltool-update", so it can be a program name with args. set dummy intltool-update; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_INTLTOOL_UPDATE+:} false; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_UPDATE in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_UPDATE="$INTLTOOL_UPDATE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_INTLTOOL_UPDATE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE if test -n "$INTLTOOL_UPDATE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_UPDATE" >&5 $as_echo "$INTLTOOL_UPDATE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "intltool-merge", so it can be a program name with args. set dummy intltool-merge; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_INTLTOOL_MERGE+:} false; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_MERGE in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_MERGE="$INTLTOOL_MERGE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_INTLTOOL_MERGE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_MERGE=$ac_cv_path_INTLTOOL_MERGE if test -n "$INTLTOOL_MERGE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_MERGE" >&5 $as_echo "$INTLTOOL_MERGE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "intltool-extract", so it can be a program name with args. set dummy intltool-extract; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_INTLTOOL_EXTRACT+:} false; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_EXTRACT in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_EXTRACT="$INTLTOOL_EXTRACT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_INTLTOOL_EXTRACT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_EXTRACT=$ac_cv_path_INTLTOOL_EXTRACT if test -n "$INTLTOOL_EXTRACT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_EXTRACT" >&5 $as_echo "$INTLTOOL_EXTRACT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then as_fn_error $? "The intltool scripts were not found. Please install intltool." "$LINENO" 5 fi if test -z "$AM_DEFAULT_VERBOSITY"; then AM_DEFAULT_VERBOSITY=1 fi INTLTOOL_V_MERGE='$(INTLTOOL__v_MERGE_$(V))' INTLTOOL__v_MERGE_='$(INTLTOOL__v_MERGE_$(AM_DEFAULT_VERBOSITY))' INTLTOOL__v_MERGE_0='@echo " ITMRG " $@;' INTLTOOL_V_MERGE_OPTIONS='$(intltool__v_merge_options_$(V))' intltool__v_merge_options_='$(intltool__v_merge_options_$(AM_DEFAULT_VERBOSITY))' intltool__v_merge_options_0='-q' INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -p $(top_srcdir)/po $< $@' INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge 5000; then INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u --no-translations $< $@' else INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)_it_tmp_dir=tmp.intltool.$$RANDOM && mkdir $$_it_tmp_dir && LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u $$_it_tmp_dir $< $@ && rmdir $$_it_tmp_dir' fi INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' # Check the gettext tools to make sure they are GNU # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_XGETTEXT+:} false; then : $as_echo_n "(cached) " >&6 else case $XGETTEXT in [\\/]* | ?:[\\/]*) ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi XGETTEXT=$ac_cv_path_XGETTEXT if test -n "$XGETTEXT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 $as_echo "$XGETTEXT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "msgmerge", so it can be a program name with args. set dummy msgmerge; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_MSGMERGE+:} false; then : $as_echo_n "(cached) " >&6 else case $MSGMERGE in [\\/]* | ?:[\\/]*) ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi MSGMERGE=$ac_cv_path_MSGMERGE if test -n "$MSGMERGE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 $as_echo "$MSGMERGE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_MSGFMT+:} false; then : $as_echo_n "(cached) " >&6 else case $MSGFMT in [\\/]* | ?:[\\/]*) ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi MSGFMT=$ac_cv_path_MSGFMT if test -n "$MSGFMT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 $as_echo "$MSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_GMSGFMT+:} false; then : $as_echo_n "(cached) " >&6 else case $GMSGFMT in [\\/]* | ?:[\\/]*) ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ;; esac fi GMSGFMT=$ac_cv_path_GMSGFMT if test -n "$GMSGFMT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 $as_echo "$GMSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 fi xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 fi # Extract the first word of "perl", so it can be a program name with args. set dummy perl; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_INTLTOOL_PERL+:} false; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_PERL in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL if test -n "$INTLTOOL_PERL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_PERL" >&5 $as_echo "$INTLTOOL_PERL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$INTLTOOL_PERL"; then as_fn_error $? "perl not found" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for perl >= 5.8.1" >&5 $as_echo_n "checking for perl >= 5.8.1... " >&6; } $INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 if test $? -ne 0; then as_fn_error $? "perl 5.8.1 is required for intltool" "$LINENO" 5 else IT_PERL_VERSION=`$INTLTOOL_PERL -e "printf '%vd', $^V"` { $as_echo "$as_me:${as_lineno-$LINENO}: result: $IT_PERL_VERSION" >&5 $as_echo "$IT_PERL_VERSION" >&6; } fi if test "x" != "xno-xml"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML::Parser" >&5 $as_echo_n "checking for XML::Parser... " >&6; } if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 $as_echo "ok" >&6; } else as_fn_error $? "XML::Parser perl module is required for intltool" "$LINENO" 5 fi fi # Substitute ALL_LINGUAS so we can use it in po/Makefile # Set DATADIRNAME correctly if it is not set yet # (copied from glib-gettext.m4) if test -z "$DATADIRNAME"; then cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : DATADIRNAME=share else case $host in *-*-solaris*) ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" if test "x$ac_cv_func_bind_textdomain_codeset" = xyes; then : DATADIRNAME=share else DATADIRNAME=lib fi ;; *) DATADIRNAME=lib ;; esac fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi # Check whether --enable-silent-rules was given. if test "${enable_silent_rules+set}" = set; then : enableval=$enable_silent_rules; fi case $enable_silent_rules in # ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=0;; esac am_make=${MAKE-make} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 $as_echo_n "checking whether $am_make supports nested variables... " >&6; } if ${am_cv_make_support_nested_variables+:} false; then : $as_echo_n "(cached) " >&6 else if $as_echo 'TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 $as_echo "$am_cv_make_support_nested_variables" >&6; } if test $am_cv_make_support_nested_variables = yes; then AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AM_BACKSLASH='\' case `pwd` in *\ * | *\ *) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 $as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; esac macro_version='2.4.2' macro_revision='1.3337' ltmain="$ac_aux_dir/ltmain.sh" # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } if ${ac_cv_build+:} false; then : $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; *) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' set x $ac_cv_build shift build_cpu=$1 build_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: build_os=$* IFS=$ac_save_IFS case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } if ${ac_cv_host+:} false; then : $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; *) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' set x $ac_cv_host shift host_cpu=$1 host_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: host_os=$* IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac # Backslashify metacharacters that are still active within # double-quoted strings. sed_quote_subst='s/\(["`$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 $as_echo_n "checking how to print strings... " >&6; } # Test print first, because it will be a builtin if present. if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='print -r --' elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='printf %s\n' else # Use this function as a fallback that always works. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } ECHO='func_fallback_echo' fi # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "" } case "$ECHO" in printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 $as_echo "printf" >&6; } ;; print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 $as_echo "print -r" >&6; } ;; *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 $as_echo "cat" >&6; } ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 $as_echo_n "checking for a sed that does not truncate output... " >&6; } if ${ac_cv_path_SED+:} false; then : $as_echo_n "(cached) " >&6 else ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ for ac_i in 1 2 3 4 5 6 7; do ac_script="$ac_script$as_nl$ac_script" done echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed { ac_script=; unset ac_script;} if test -z "$SED"; then ac_path_SED_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_SED" || continue # Check for GNU ac_path_SED and select it if it is found. # Check for GNU $ac_path_SED case `"$ac_path_SED" --version 2>&1` in *GNU*) ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo '' >> "conftest.nl" "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_SED_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_SED="$ac_path_SED" ac_path_SED_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_SED_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_SED"; then as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 fi else ac_cv_path_SED=$SED fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 $as_echo "$ac_cv_path_SED" >&6; } SED="$ac_cv_path_SED" rm -f conftest.sed test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if ${ac_cv_path_GREP+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_GREP" || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if ${ac_cv_path_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_EGREP" || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 $as_echo_n "checking for fgrep... " >&6; } if ${ac_cv_path_FGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 then ac_cv_path_FGREP="$GREP -F" else if test -z "$FGREP"; then ac_path_FGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in fgrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_FGREP" || continue # Check for GNU ac_path_FGREP and select it if it is found. # Check for GNU $ac_path_FGREP case `"$ac_path_FGREP" --version 2>&1` in *GNU*) ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'FGREP' >> "conftest.nl" "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_FGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_FGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_FGREP"; then as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_FGREP=$FGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 $as_echo "$ac_cv_path_FGREP" >&6; } FGREP="$ac_cv_path_FGREP" test -z "$GREP" && GREP=grep # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi if ${lt_cv_path_LD+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } if ${lt_cv_prog_gnu_ld+:} false; then : $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } if ${lt_cv_path_NM+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done : ${lt_cv_path_NM=no} fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : # Let the user override the test. else if test -n "$ac_tool_prefix"; then for ac_prog in dumpbin "link -dump" do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DUMPBIN+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DUMPBIN"; then ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DUMPBIN=$ac_cv_prog_DUMPBIN if test -n "$DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 $as_echo "$DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$DUMPBIN" && break done fi if test -z "$DUMPBIN"; then ac_ct_DUMPBIN=$DUMPBIN for ac_prog in dumpbin "link -dump" do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DUMPBIN"; then ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN if test -n "$ac_ct_DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 $as_echo "$ac_ct_DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_DUMPBIN" && break done if test "x$ac_ct_DUMPBIN" = x; then DUMPBIN=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DUMPBIN=$ac_ct_DUMPBIN fi fi case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in *COFF*) DUMPBIN="$DUMPBIN -symbols" ;; *) DUMPBIN=: ;; esac fi if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" fi fi test -z "$NM" && NM=nm { $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 $as_echo_n "checking the name lister ($NM) interface... " >&6; } if ${lt_cv_nm_interface+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&5 (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&5 (eval echo "\"\$as_me:$LINENO: output\"" >&5) cat conftest.out >&5 if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 $as_echo "$lt_cv_nm_interface" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 $as_echo_n "checking whether ln -s works... " >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 $as_echo "no, using $LN_S" >&6; } fi # find the maximum length of command line arguments { $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 $as_echo_n "checking the maximum length of command line arguments... " >&6; } if ${lt_cv_sys_max_cmd_len+:} false; then : $as_echo_n "(cached) " >&6 else i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; mint*) # On MiNT this can take a long time and run out of memory. lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; os2*) # The test takes a long time on OS/2. lt_cv_sys_max_cmd_len=8192 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len" && \ test undefined != "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8 ; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac fi if test -n $lt_cv_sys_max_cmd_len ; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 $as_echo "$lt_cv_sys_max_cmd_len" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 $as_echo "none" >&6; } fi max_cmd_len=$lt_cv_sys_max_cmd_len : ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ = c,a/b,b/c, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 $as_echo "$xsi_shell" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 $as_echo_n "checking whether the shell understands \"+=\"... " >&6; } lt_shell_append=no ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 $as_echo "$lt_shell_append" >&6; } if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 $as_echo_n "checking how to convert $build file names to $host format... " >&6; } if ${lt_cv_to_host_file_cmd+:} false; then : $as_echo_n "(cached) " >&6 else case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ;; esac ;; *-*-cygwin* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_noop ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ;; esac ;; * ) # unhandled hosts (and "normal" native builds) lt_cv_to_host_file_cmd=func_convert_file_noop ;; esac fi to_host_file_cmd=$lt_cv_to_host_file_cmd { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 $as_echo "$lt_cv_to_host_file_cmd" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 $as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } if ${lt_cv_to_tool_file_cmd+:} false; then : $as_echo_n "(cached) " >&6 else #assume ordinary cross tools, or native build. lt_cv_to_tool_file_cmd=func_convert_file_noop case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ;; esac ;; esac fi to_tool_file_cmd=$lt_cv_to_tool_file_cmd { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 $as_echo "$lt_cv_to_tool_file_cmd" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 $as_echo_n "checking for $LD option to reload object files... " >&6; } if ${lt_cv_ld_reload_flag+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_reload_flag='-r' fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 $as_echo "$lt_cv_ld_reload_flag" >&6; } reload_flag=$lt_cv_ld_reload_flag case $reload_flag in "" | " "*) ;; *) reload_flag=" $reload_flag" ;; esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in cygwin* | mingw* | pw32* | cegcc*) if test "$GCC" != yes; then reload_cmds=false fi ;; darwin*) if test "$GCC" = yes; then reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' else reload_cmds='$LD$reload_flag -o $output$reload_objs' fi ;; esac if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OBJDUMP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OBJDUMP"; then ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 $as_echo "$OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OBJDUMP"; then ac_ct_OBJDUMP=$OBJDUMP # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OBJDUMP"; then ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OBJDUMP="objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 $as_echo "$ac_ct_OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OBJDUMP" = x; then OBJDUMP="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OBJDUMP=$ac_ct_OBJDUMP fi else OBJDUMP="$ac_cv_prog_OBJDUMP" fi test -z "$OBJDUMP" && OBJDUMP=objdump { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 $as_echo_n "checking how to recognize dependent libraries... " >&6; } if ${lt_cv_deplibs_check_method+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given extended regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix[4-9]*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi[45]*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin*) # func_win32_libid is a shell function defined in ltmain.sh lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' ;; mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else # Keep this pattern in sync with the one in func_win32_libid. lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc*) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; haiku*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[3-9]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 $as_echo "$lt_cv_deplibs_check_method" >&6; } file_magic_glob= want_nocaseglob=no if test "$build" = "$host"; then case $host_os in mingw* | pw32*) if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then want_nocaseglob=yes else file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` fi ;; esac fi file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ac_tool_prefix}dlltool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DLLTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DLLTOOL"; then ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DLLTOOL=$ac_cv_prog_DLLTOOL if test -n "$DLLTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 $as_echo "$DLLTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DLLTOOL"; then ac_ct_DLLTOOL=$DLLTOOL # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DLLTOOL"; then ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DLLTOOL="dlltool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL if test -n "$ac_ct_DLLTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 $as_echo "$ac_ct_DLLTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DLLTOOL" = x; then DLLTOOL="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DLLTOOL=$ac_ct_DLLTOOL fi else DLLTOOL="$ac_cv_prog_DLLTOOL" fi test -z "$DLLTOOL" && DLLTOOL=dlltool { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 $as_echo_n "checking how to associate runtime and link libraries... " >&6; } if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_sharedlib_from_linklib_cmd='unknown' case $host_os in cygwin* | mingw* | pw32* | cegcc*) # two different shell functions defined in ltmain.sh # decide which to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ;; *) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ;; esac ;; *) # fallback: assume linklib IS sharedlib lt_cv_sharedlib_from_linklib_cmd="$ECHO" ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 $as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO if test -n "$ac_tool_prefix"; then for ac_prog in ar do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_AR+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AR"; then ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AR="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 $as_echo "$AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AR" && break done fi if test -z "$AR"; then ac_ct_AR=$AR for ac_prog in ar do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_AR+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_AR"; then ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_AR="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 $as_echo "$ac_ct_AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_AR" && break done if test "x$ac_ct_AR" = x; then AR="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac AR=$ac_ct_AR fi fi : ${AR=ar} : ${AR_FLAGS=cru} { $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 $as_echo_n "checking for archiver @FILE support... " >&6; } if ${lt_cv_ar_at_file+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ar_at_file=no cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : echo conftest.$ac_objext > conftest.lst lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 (eval $lt_ar_try) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if test "$ac_status" -eq 0; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 (eval $lt_ar_try) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if test "$ac_status" -ne 0; then lt_cv_ar_at_file=@ fi fi rm -f conftest.* libconftest.a fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 $as_echo "$lt_cv_ar_at_file" >&6; } if test "x$lt_cv_ar_at_file" = xno; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi test -z "$STRIP" && STRIP=: if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 $as_echo "$RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_RANLIB="ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 $as_echo "$ac_ct_RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_RANLIB" = x; then RANLIB=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac RANLIB=$ac_ct_RANLIB fi else RANLIB="$ac_cv_prog_RANLIB" fi test -z "$RANLIB" && RANLIB=: # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" fi case $host_os in darwin*) lock_old_archive_extraction=yes ;; *) lock_old_archive_extraction=no ;; esac # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Check for command to grab the raw symbol name followed by C symbol from nm. { $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } if ${lt_cv_sys_global_symbol_pipe+:} false; then : $as_echo_n "(cached) " >&6 else # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[BCDEGRST]' # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[BCDT]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[ABCDGISTW]' ;; hpux*) if test "$host_cpu" = ia64; then symcode='[ABCDEGRST]' fi ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; osf*) symcode='[BCDEGQRST]' ;; solaris*) symcode='[BDRT]' ;; sco3.2v5*) symcode='[DT]' ;; sysv4.2uw2*) symcode='[DT]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[ABDT]' ;; sysv4) symcode='[DFNSTU]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[ABCDGIRSTW]' ;; esac # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function # and D for any global variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK '"\ " {last_section=section; section=\$ 3};"\ " /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ " {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ " s[1]~/^[@?]/{print s[1], s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then # Now try to grab the symbols. nlist=conftest.nm if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ LT_DLSYM_CONST struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&5 fi else echo "cannot find nm_test_var in $nlist" >&5 fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 fi else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done fi if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 $as_echo "failed" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 $as_echo "ok" >&6; } fi # Response file support. if test "$lt_cv_nm_interface" = "MS dumpbin"; then nm_file_list_spec='@' elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then nm_file_list_spec='@' fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 $as_echo_n "checking for sysroot... " >&6; } # Check whether --with-sysroot was given. if test "${with_sysroot+set}" = set; then : withval=$with_sysroot; else with_sysroot=no fi lt_sysroot= case ${with_sysroot} in #( yes) if test "$GCC" = yes; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( /*) lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` ;; #( no|'') ;; #( *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 $as_echo "${with_sysroot}" >&6; } as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 $as_echo "${lt_sysroot:-no}" >&6; } # Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then : enableval=$enable_libtool_lock; fi test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '#line '$LINENO' "configure"' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) case `/usr/bin/file conftest.o` in *x86-64*) LD="${LD-ld} -m elf32_x86_64" ;; *) LD="${LD-ld} -m elf_i386" ;; esac ;; powerpc64le-*) LD="${LD-ld} -m elf32lppclinux" ;; powerpc64-*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; powerpcle-*) LD="${LD-ld} -m elf64lppc" ;; powerpc-*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 $as_echo_n "checking whether the C compiler needs -belf... " >&6; } if ${lt_cv_cc_needs_belf+:} false; then : $as_echo_n "(cached) " >&6 else ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_cc_needs_belf=yes else lt_cv_cc_needs_belf=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 $as_echo "$lt_cv_cc_needs_belf" >&6; } if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; *-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) case $host in i?86-*-solaris*) LD="${LD-ld} -m elf_x86_64" ;; sparc*-*-solaris*) LD="${LD-ld} -m elf64_sparc" ;; esac # GNU ld 2.21 introduced _sol2 emulations. Use them if available. if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then LD="${LD-ld}_sol2" fi ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks="$enable_libtool_lock" if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. set dummy ${ac_tool_prefix}mt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$MANIFEST_TOOL"; then ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL if test -n "$MANIFEST_TOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 $as_echo "$MANIFEST_TOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_MANIFEST_TOOL"; then ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL # Extract the first word of "mt", so it can be a program name with args. set dummy mt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_MANIFEST_TOOL"; then ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL if test -n "$ac_ct_MANIFEST_TOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 $as_echo "$ac_ct_MANIFEST_TOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_MANIFEST_TOOL" = x; then MANIFEST_TOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL fi else MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" fi test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 $as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } if ${lt_cv_path_mainfest_tool+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_path_mainfest_tool=no echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out cat conftest.err >&5 if $GREP 'Manifest Tool' conftest.out > /dev/null; then lt_cv_path_mainfest_tool=yes fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 $as_echo "$lt_cv_path_mainfest_tool" >&6; } if test "x$lt_cv_path_mainfest_tool" != xyes; then MANIFEST_TOOL=: fi case $host_os in rhapsody* | darwin*) if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DSYMUTIL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DSYMUTIL"; then ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DSYMUTIL=$ac_cv_prog_DSYMUTIL if test -n "$DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 $as_echo "$DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DSYMUTIL"; then ac_ct_DSYMUTIL=$DSYMUTIL # Extract the first word of "dsymutil", so it can be a program name with args. set dummy dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DSYMUTIL"; then ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL if test -n "$ac_ct_DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 $as_echo "$ac_ct_DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DSYMUTIL" = x; then DSYMUTIL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DSYMUTIL=$ac_ct_DSYMUTIL fi else DSYMUTIL="$ac_cv_prog_DSYMUTIL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. set dummy ${ac_tool_prefix}nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_NMEDIT+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$NMEDIT"; then ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi NMEDIT=$ac_cv_prog_NMEDIT if test -n "$NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 $as_echo "$NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_NMEDIT"; then ac_ct_NMEDIT=$NMEDIT # Extract the first word of "nmedit", so it can be a program name with args. set dummy nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_NMEDIT"; then ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_NMEDIT="nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT if test -n "$ac_ct_NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 $as_echo "$ac_ct_NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_NMEDIT" = x; then NMEDIT=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac NMEDIT=$ac_ct_NMEDIT fi else NMEDIT="$ac_cv_prog_NMEDIT" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. set dummy ${ac_tool_prefix}lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_LIPO+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$LIPO"; then ac_cv_prog_LIPO="$LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_LIPO="${ac_tool_prefix}lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi LIPO=$ac_cv_prog_LIPO if test -n "$LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 $as_echo "$LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_LIPO"; then ac_ct_LIPO=$LIPO # Extract the first word of "lipo", so it can be a program name with args. set dummy lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_LIPO+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_LIPO"; then ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_LIPO="lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO if test -n "$ac_ct_LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 $as_echo "$ac_ct_LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_LIPO" = x; then LIPO=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac LIPO=$ac_ct_LIPO fi else LIPO="$ac_cv_prog_LIPO" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. set dummy ${ac_tool_prefix}otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL"; then ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OTOOL="${ac_tool_prefix}otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL=$ac_cv_prog_OTOOL if test -n "$OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 $as_echo "$OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL"; then ac_ct_OTOOL=$OTOOL # Extract the first word of "otool", so it can be a program name with args. set dummy otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL"; then ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OTOOL="otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL if test -n "$ac_ct_OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 $as_echo "$ac_ct_OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL" = x; then OTOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL=$ac_ct_OTOOL fi else OTOOL="$ac_cv_prog_OTOOL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. set dummy ${ac_tool_prefix}otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OTOOL64+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL64"; then ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL64=$ac_cv_prog_OTOOL64 if test -n "$OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 $as_echo "$OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL64"; then ac_ct_OTOOL64=$OTOOL64 # Extract the first word of "otool64", so it can be a program name with args. set dummy otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL64"; then ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OTOOL64="otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 if test -n "$ac_ct_OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 $as_echo "$ac_ct_OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL64" = x; then OTOOL64=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL64=$ac_ct_OTOOL64 fi else OTOOL64="$ac_cv_prog_OTOOL64" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 $as_echo_n "checking for -single_module linker flag... " >&6; } if ${lt_cv_apple_cc_single_mod+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&5 $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? # If there is a non-empty error log, and "single_module" # appears in it, assume the flag caused a linker warning if test -s conftest.err && $GREP single_module conftest.err; then cat conftest.err >&5 # Otherwise, if the output was created with a 0 exit code from # the compiler, it worked. elif test -f libconftest.dylib && test $_lt_result -eq 0; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&5 fi rm -rf libconftest.dylib* rm -f conftest.* fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 $as_echo "$lt_cv_apple_cc_single_mod" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } if ${lt_cv_ld_exported_symbols_list+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_ld_exported_symbols_list=yes else lt_cv_ld_exported_symbols_list=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 $as_echo_n "checking for -force_load linker flag... " >&6; } if ${lt_cv_ld_force_load+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_force_load=no cat > conftest.c << _LT_EOF int forced_loaded() { return 2;} _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 echo "$AR cru libconftest.a conftest.o" >&5 $AR cru libconftest.a conftest.o 2>&5 echo "$RANLIB libconftest.a" >&5 $RANLIB libconftest.a 2>&5 cat > conftest.c << _LT_EOF int main() { return 0;} _LT_EOF echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err _lt_result=$? if test -s conftest.err && $GREP force_load conftest.err; then cat conftest.err >&5 elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then lt_cv_ld_force_load=yes else cat conftest.err >&5 fi rm -f conftest.err libconftest.a conftest conftest.c rm -rf conftest.dSYM fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 $as_echo "$lt_cv_ld_force_load" >&6; } case $host_os in rhapsody* | darwin1.[012]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[91]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[012]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if ${ac_cv_prog_CPP+:} false; then : $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details" "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if ${ac_cv_header_stdc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in dlfcn.h do : ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default " if test "x$ac_cv_header_dlfcn_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_DLFCN_H 1 _ACEOF fi done # Set options # Check whether --enable-static was given. if test "${enable_static+set}" = set; then : enableval=$enable_static; p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac else enable_static=no fi enable_dlopen=no enable_win32_dll=no # Check whether --enable-shared was given. if test "${enable_shared+set}" = set; then : enableval=$enable_shared; p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac else enable_shared=yes fi # Check whether --with-pic was given. if test "${with_pic+set}" = set; then : withval=$with_pic; lt_p=${PACKAGE-default} case $withval in yes|no) pic_mode=$withval ;; *) pic_mode=default # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for lt_pkg in $withval; do IFS="$lt_save_ifs" if test "X$lt_pkg" = "X$lt_p"; then pic_mode=yes fi done IFS="$lt_save_ifs" ;; esac else pic_mode=default fi test -z "$pic_mode" && pic_mode=default # Check whether --enable-fast-install was given. if test "${enable_fast_install+set}" = set; then : enableval=$enable_fast_install; p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac else enable_fast_install=yes fi # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ltmain" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' test -z "$LN_S" && LN_S="ln -s" if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 $as_echo_n "checking for objdir... " >&6; } if ${lt_cv_objdir+:} false; then : $as_echo_n "(cached) " >&6 else rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 $as_echo "$lt_cv_objdir" >&6; } objdir=$lt_cv_objdir cat >>confdefs.h <<_ACEOF #define LT_OBJDIR "$lt_cv_objdir/" _ACEOF case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld="$lt_cv_prog_gnu_ld" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } if ${lt_cv_path_MAGIC_CMD+:} false; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/${ac_tool_prefix}file; then lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 $as_echo_n "checking for file... " >&6; } if ${lt_cv_path_MAGIC_CMD+:} false; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/file; then lt_cv_path_MAGIC_CMD="$ac_dir/file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi else MAGIC_CMD=: fi fi fi ;; esac # Use C for the default configuration in the libtool script lt_save_CC="$CC" ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o objext=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then lt_prog_compiler_no_builtin_flag= if test "$GCC" = yes; then case $cc_basename in nvcc*) lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; *) lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-fno-rtti -fno-exceptions" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" else : fi fi lt_prog_compiler_wl= lt_prog_compiler_pic= lt_prog_compiler_static= if test "$GCC" = yes; then lt_prog_compiler_wl='-Wl,' lt_prog_compiler_static='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support lt_prog_compiler_pic='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic='-fno-common' ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. lt_prog_compiler_static= ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) lt_prog_compiler_pic='-fPIC' ;; esac ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. lt_prog_compiler_can_build_shared=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic=-Kconform_pic fi ;; *) lt_prog_compiler_pic='-fPIC' ;; esac case $cc_basename in nvcc*) # Cuda Compiler Driver 2.2 lt_prog_compiler_wl='-Xlinker ' if test -n "$lt_prog_compiler_pic"; then lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" fi ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) lt_prog_compiler_wl='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' else lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' fi ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic='-DDLL_EXPORT' ;; hpux9* | hpux10* | hpux11*) lt_prog_compiler_wl='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? lt_prog_compiler_static='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) lt_prog_compiler_wl='-Wl,' # PIC (with -KPIC) is the default. lt_prog_compiler_static='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; # Lahey Fortran 8.1. lf95*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='--shared' lt_prog_compiler_static='--static' ;; nagfor*) # NAG Fortran compiler lt_prog_compiler_wl='-Wl,-Wl,,' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; ccc*) lt_prog_compiler_wl='-Wl,' # All Alpha code is PIC. lt_prog_compiler_static='-non_shared' ;; xl* | bgxl* | bgf* | mpixl*) # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-qpic' lt_prog_compiler_static='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) # Sun Fortran 8.3 passes all unrecognized flags to the linker lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='' ;; *Sun\ F* | *Sun*Fortran*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Qoption ld ' ;; *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Wl,' ;; *Intel*\ [CF]*Compiler*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; *Portland\ Group*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; esac ;; esac ;; newsos6) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; osf3* | osf4* | osf5*) lt_prog_compiler_wl='-Wl,' # All OSF/1 code is PIC. lt_prog_compiler_static='-non_shared' ;; rdos*) lt_prog_compiler_static='-non_shared' ;; solaris*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' case $cc_basename in f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) lt_prog_compiler_wl='-Qoption ld ';; *) lt_prog_compiler_wl='-Wl,';; esac ;; sunos4*) lt_prog_compiler_wl='-Qoption ld ' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then lt_prog_compiler_pic='-Kconform_pic' lt_prog_compiler_static='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; unicos*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_can_build_shared=no ;; uts4*) lt_prog_compiler_pic='-pic' lt_prog_compiler_static='-Bstatic' ;; *) lt_prog_compiler_can_build_shared=no ;; esac fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= ;; *) lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 $as_echo_n "checking for $compiler option to produce PIC... " >&6; } if ${lt_cv_prog_compiler_pic+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic=$lt_prog_compiler_pic fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 $as_echo "$lt_cv_prog_compiler_pic" >&6; } lt_prog_compiler_pic=$lt_cv_prog_compiler_pic # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } if ${lt_cv_prog_compiler_pic_works+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic -DPIC" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } if test x"$lt_cv_prog_compiler_pic_works" = xyes; then case $lt_prog_compiler_pic in "" | " "*) ;; *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; esac else lt_prog_compiler_pic= lt_prog_compiler_can_build_shared=no fi fi # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } if ${lt_cv_prog_compiler_static_works+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works=yes fi else lt_cv_prog_compiler_static_works=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 $as_echo "$lt_cv_prog_compiler_static_works" >&6; } if test x"$lt_cv_prog_compiler_static_works" = xyes; then : else lt_prog_compiler_static= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } runpath_var= allow_undefined_flag= always_export_symbols=no archive_cmds= archive_expsym_cmds= compiler_needs_object=no enable_shared_with_static_runtimes=no export_dynamic_flag_spec= export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' hardcode_automatic=no hardcode_direct=no hardcode_direct_absolute=no hardcode_libdir_flag_spec= hardcode_libdir_separator= hardcode_minus_L=no hardcode_shlibpath_var=unsupported inherit_rpath=no link_all_deplibs=unknown module_cmds= module_expsym_cmds= old_archive_from_new_cmds= old_archive_from_expsyms_cmds= thread_safe_flag_spec= whole_archive_flag_spec= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; linux* | k*bsd*-gnu | gnu*) link_all_deplibs=no ;; esac ld_shlibs=yes # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility # with the native linker. However, as the warning in the GNU ld # block says, versions before 2.19.5* couldn't really create working # shared libraries, regardless of the interface used. case `$LD -v 2>&1` in *\ \(GNU\ Binutils\)\ 2.19.5*) ;; *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; *\ \(GNU\ Binutils\)\ [3-9]*) ;; *) lt_use_gnu_ld_interface=yes ;; esac ;; *) lt_use_gnu_ld_interface=yes ;; esac fi if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec= fi supports_anon_versioning=no case `$LD -v 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.19, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to install binutils *** 2.20 or above, or modify your PATH so that a non-GNU linker is found. *** You will then need to restart the configuration process. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' export_dynamic_flag_spec='${wl}--export-all-symbols' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs=no fi ;; haiku*) archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' link_all_deplibs=yes ;; interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 whole_archive_flag_spec= tmp_sharedflag='--shared' ;; xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi case $cc_basename in xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else ld_shlibs=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac ;; sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct=yes hardcode_shlibpath_var=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = no; then runpath_var= hardcode_libdir_flag_spec= export_dynamic_flag_spec= whole_archive_flag_spec= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag=unsupported always_export_symbols=yes archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global # defined symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds='' hardcode_direct=yes hardcode_direct_absolute=yes hardcode_libdir_separator=':' link_all_deplibs=yes file_list_spec='${wl}-f,' if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi link_all_deplibs=no else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi export_dynamic_flag_spec='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an # empty executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath_ fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath_ fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag=' ${wl}-bernotok' allow_undefined_flag=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec='$convenience' fi archive_cmds_need_lc=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; bsdi[45]*) export_dynamic_flag_spec=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in cl*) # Native MSVC hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported always_export_symbols=yes file_list_spec='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, )='true' enable_shared_with_static_runtimes=yes exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' # Don't use ranlib old_postinstall_cmds='chmod 644 $oldlib' postlink_cmds='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # Assume MSVC wrapper hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_from_new_cmds='true' # FIXME: Should let the user specify the lib program. old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' enable_shared_with_static_runtimes=yes ;; esac ;; darwin* | rhapsody*) archive_cmds_need_lc=no hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported if test "$lt_cv_ld_force_load" = "yes"; then whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else whole_archive_flag_spec='' fi link_all_deplibs=yes allow_undefined_flag="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=func_echo_all archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" else ld_shlibs=no fi ;; dgux*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2.*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; hpux9*) if test "$GCC" = yes; then archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes export_dynamic_flag_spec='${wl}-E' ;; hpux10*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes fi ;; hpux11*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) # Older versions of the 11.00 compiler do not understand -b yet # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 $as_echo_n "checking if $CC understands -b... " >&6; } if ${lt_cv_prog_compiler__b+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler__b=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -b" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler__b=yes fi else lt_cv_prog_compiler__b=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 $as_echo "$lt_cv_prog_compiler__b" >&6; } if test x"$lt_cv_prog_compiler__b" = xyes; then archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi ;; esac fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: case $host_cpu in hppa*64*|ia64*) hardcode_direct=no hardcode_shlibpath_var=no ;; *) hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. # This should be the same for all languages, so no per-tag cache variable. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 $as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } if ${lt_cv_irix_exported_symbol+:} false; then : $as_echo_n "(cached) " >&6 else save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int foo (void) { return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_irix_exported_symbol=yes else lt_cv_irix_exported_symbol=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 $as_echo "$lt_cv_irix_exported_symbol" >&6; } if test "$lt_cv_irix_exported_symbol" = yes; then archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' fi else archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: inherit_rpath=yes link_all_deplibs=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; *nto* | *qnx*) ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes hardcode_shlibpath_var=no hardcode_direct_absolute=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' else case $host_os in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-R$libdir' ;; *) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi else ld_shlibs=no fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi archive_cmds_need_lc='no' hardcode_libdir_separator=: ;; solaris*) no_undefined_flag=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='${wl}' archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else whole_archive_flag_spec='-z allextract$convenience -z defaultextract' fi ;; esac link_all_deplibs=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; sysv4) case $host_vendor in sni) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' reload_cmds='$CC -r -o $output$reload_objs' hardcode_direct=no ;; motorola) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; sysv4.3*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no export_dynamic_flag_spec='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag='${wl}-z,text' archive_cmds_need_lc=no hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag='${wl}-z,text' allow_undefined_flag='${wl}-z,nodefs' archive_cmds_need_lc=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-R,$libdir' hardcode_libdir_separator=':' link_all_deplibs=yes export_dynamic_flag_spec='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; *) ld_shlibs=no ;; esac if test x$host_vendor = xsni; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) export_dynamic_flag_spec='${wl}-Blargedynsym' ;; esac fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 $as_echo "$ld_shlibs" >&6; } test "$ld_shlibs" = no && can_build_shared=no with_gnu_ld=$with_gnu_ld # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc" in x|xyes) # Assume -lc should be added archive_cmds_need_lc=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } if ${lt_cv_archive_cmds_need_lc+:} false; then : $as_echo_n "(cached) " >&6 else $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl pic_flag=$lt_prog_compiler_pic compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag allow_undefined_flag= if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then lt_cv_archive_cmds_need_lc=no else lt_cv_archive_cmds_need_lc=yes fi allow_undefined_flag=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 $as_echo "$lt_cv_archive_cmds_need_lc" >&6; } archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc ;; esac fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac case $host_os in mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; *) lt_sed_strip_eq="s,=/,/,g" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` ;; *) lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` ;; esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[lt_foo]++; } if (lt_freq[lt_foo] == 1) { print lt_foo; } }'` # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's,/\([A-Za-z]:\),\1,g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' library_names_spec='${libname}.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec="$LIB" if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[23].*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; haiku*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=yes sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[3-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH if ${lt_cv_shlibpath_overrides_runpath+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : lt_cv_shlibpath_overrides_runpath=yes fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS libdir=$save_libdir fi shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action= if test -n "$hardcode_libdir_flag_spec" || test -n "$runpath_var" || test "X$hardcode_automatic" = "Xyes" ; then # We can hardcode non-existent directories. if test "$hardcode_direct" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && test "$hardcode_minus_L" != no; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action=unsupported fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 $as_echo "$hardcode_action" >&6; } if test "$hardcode_action" = relink || test "$inherit_rpath" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes fi ;; *) ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" if test "x$ac_cv_func_shl_load" = xyes; then : lt_cv_dlopen="shl_load" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 $as_echo_n "checking for shl_load in -ldld... " >&6; } if ${ac_cv_lib_dld_shl_load+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char shl_load (); int main () { return shl_load (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_shl_load=yes else ac_cv_lib_dld_shl_load=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 $as_echo "$ac_cv_lib_dld_shl_load" >&6; } if test "x$ac_cv_lib_dld_shl_load" = xyes; then : lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" else ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" if test "x$ac_cv_func_dlopen" = xyes; then : lt_cv_dlopen="dlopen" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } if ${ac_cv_lib_svld_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_svld_dlopen=yes else ac_cv_lib_svld_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } if test "x$ac_cv_lib_svld_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } if ${ac_cv_lib_dld_dld_link+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dld_link (); int main () { return dld_link (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_dld_link=yes else ac_cv_lib_dld_dld_link=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } if test "x$ac_cv_lib_dld_dld_link" = xyes; then : lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" fi fi fi fi fi fi ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 $as_echo_n "checking whether a program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; esac else : # compilation failed lt_cv_dlopen_self=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 $as_echo "$lt_cv_dlopen_self" >&6; } if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self_static+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; esac else : # compilation failed lt_cv_dlopen_self_static=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 $as_echo "$lt_cv_dlopen_self_static" >&6; } fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi striplib= old_striplib= { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 $as_echo_n "checking whether stripping libraries is possible... " >&6; } if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi ;; *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } ;; esac fi # Report which library types will actually be built { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 $as_echo_n "checking if libtool supports shared libraries... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 $as_echo "$can_build_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 $as_echo_n "checking whether to build shared libraries... " >&6; } test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[4-9]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 $as_echo "$enable_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 $as_echo_n "checking whether to build static libraries... " >&6; } # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 $as_echo "$enable_static" >&6; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC="$lt_save_CC" ac_config_commands="$ac_config_commands libtool" # Only expand once: # Checks for programs. ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 $as_echo_n "checking whether $CC understands -c and -o together... " >&6; } if ${am_cv_prog_cc_c_o+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done rm -f core conftest* unset am_i fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 $as_echo "$am_cv_prog_cc_c_o" >&6; } if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if ${am_cv_CC_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu if test -z "$CXX"; then if test -n "$CCC"; then CXX=$CCC else if test -n "$ac_tool_prefix"; then for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CXX+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CXX"; then ac_cv_prog_CXX="$CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CXX=$ac_cv_prog_CXX if test -n "$CXX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 $as_echo "$CXX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CXX" && break done fi if test -z "$CXX"; then ac_ct_CXX=$CXX for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CXX+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CXX"; then ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CXX="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CXX=$ac_cv_prog_ac_ct_CXX if test -n "$ac_ct_CXX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 $as_echo "$ac_ct_CXX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CXX" && break done if test "x$ac_ct_CXX" = x; then CXX="g++" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CXX=$ac_ct_CXX fi fi fi fi # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 $as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } if ${ac_cv_cxx_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_cxx_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 $as_echo "$ac_cv_cxx_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GXX=yes else GXX= fi ac_test_CXXFLAGS=${CXXFLAGS+set} ac_save_CXXFLAGS=$CXXFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 $as_echo_n "checking whether $CXX accepts -g... " >&6; } if ${ac_cv_prog_cxx_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_cxx_werror_flag=$ac_cxx_werror_flag ac_cxx_werror_flag=yes ac_cv_prog_cxx_g=no CXXFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : ac_cv_prog_cxx_g=yes else CXXFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : else ac_cxx_werror_flag=$ac_save_cxx_werror_flag CXXFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : ac_cv_prog_cxx_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cxx_werror_flag=$ac_save_cxx_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 $as_echo "$ac_cv_prog_cxx_g" >&6; } if test "$ac_test_CXXFLAGS" = set; then CXXFLAGS=$ac_save_CXXFLAGS elif test $ac_cv_prog_cxx_g = yes; then if test "$GXX" = yes; then CXXFLAGS="-g -O2" else CXXFLAGS="-g" fi else if test "$GXX" = yes; then CXXFLAGS="-O2" else CXXFLAGS= fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CXX" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if ${am_cv_CXX_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CXX_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CXX_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CXX_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5 $as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then am__fastdepCXX_TRUE= am__fastdepCXX_FALSE='#' else am__fastdepCXX_TRUE='#' am__fastdepCXX_FALSE= fi func_stripname_cnf () { case ${2} in .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; esac } # func_stripname_cnf if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 $as_echo_n "checking how to run the C++ preprocessor... " >&6; } if test -z "$CXXCPP"; then if ${ac_cv_prog_CXXCPP+:} false; then : $as_echo_n "(cached) " >&6 else # Double quotes because CXXCPP needs to be expanded for CXXCPP in "$CXX -E" "/lib/cpp" do ac_preproc_ok=false for ac_cxx_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_cxx_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_cxx_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CXXCPP=$CXXCPP fi CXXCPP=$ac_cv_prog_CXXCPP else ac_cv_prog_CXXCPP=$CXXCPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5 $as_echo "$CXXCPP" >&6; } ac_preproc_ok=false for ac_cxx_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_cxx_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_cxx_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check See \`config.log' for more details" "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu else _lt_caught_CXX_error=yes fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu archive_cmds_need_lc_CXX=no allow_undefined_flag_CXX= always_export_symbols_CXX=no archive_expsym_cmds_CXX= compiler_needs_object_CXX=no export_dynamic_flag_spec_CXX= hardcode_direct_CXX=no hardcode_direct_absolute_CXX=no hardcode_libdir_flag_spec_CXX= hardcode_libdir_separator_CXX= hardcode_minus_L_CXX=no hardcode_shlibpath_var_CXX=unsupported hardcode_automatic_CXX=no inherit_rpath_CXX=no module_cmds_CXX= module_expsym_cmds_CXX= link_all_deplibs_CXX=unknown old_archive_cmds_CXX=$old_archive_cmds reload_flag_CXX=$reload_flag reload_cmds_CXX=$reload_cmds no_undefined_flag_CXX= whole_archive_flag_spec_CXX= enable_shared_with_static_runtimes_CXX=no # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o objext_CXX=$objext # No sense in running all these tests if we already determined that # the CXX compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_caught_CXX_error" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} CFLAGS=$CXXFLAGS compiler=$CC compiler_CXX=$CC for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` if test -n "$compiler"; then # We don't want -fno-exception when compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' else lt_prog_compiler_no_builtin_flag_CXX= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi if ${lt_cv_path_LD+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } if ${lt_cv_prog_gnu_ld+:} false; then : $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | $GREP 'no-whole-archive' > /dev/null; then whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec_CXX= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } ld_shlibs_CXX=yes case $host_os in aix3*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds_CXX='' hardcode_direct_CXX=yes hardcode_direct_absolute_CXX=yes hardcode_libdir_separator_CXX=':' link_all_deplibs_CXX=yes file_list_spec_CXX='${wl}-f,' if test "$GXX" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct_CXX=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L_CXX=yes hardcode_libdir_flag_spec_CXX='-L$libdir' hardcode_libdir_separator_CXX= fi esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi export_dynamic_flag_spec_CXX='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to # export. always_export_symbols_CXX=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag_CXX='-berok' # Determine the default libpath from the value encoded in an empty # executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath__CXX+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath__CXX"; then lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath__CXX"; then lt_cv_aix_libpath__CXX="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath__CXX fi hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag_CXX="-z nodefs" archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath__CXX+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath__CXX"; then lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath__CXX"; then lt_cv_aix_libpath__CXX="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath__CXX fi hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag_CXX=' ${wl}-bernotok' allow_undefined_flag_CXX=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec_CXX='$convenience' fi archive_cmds_need_lc_CXX=yes # This is similar to how AIX traditionally builds its shared # libraries. archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then allow_undefined_flag_CXX=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs_CXX=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; cygwin* | mingw* | pw32* | cegcc*) case $GXX,$cc_basename in ,cl* | no,cl*) # Native MSVC # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec_CXX=' ' allow_undefined_flag_CXX=unsupported always_export_symbols_CXX=yes file_list_spec_CXX='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true' enable_shared_with_static_runtimes_CXX=yes # Don't use ranlib old_postinstall_cmds_CXX='chmod 644 $oldlib' postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ func_to_tool_file "$lt_outputfile"~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # g++ # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec_CXX='-L$libdir' export_dynamic_flag_spec_CXX='${wl}--export-all-symbols' allow_undefined_flag_CXX=unsupported always_export_symbols_CXX=no enable_shared_with_static_runtimes_CXX=yes if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs_CXX=no fi ;; esac ;; darwin* | rhapsody*) archive_cmds_need_lc_CXX=no hardcode_direct_CXX=no hardcode_automatic_CXX=yes hardcode_shlibpath_var_CXX=unsupported if test "$lt_cv_ld_force_load" = "yes"; then whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else whole_archive_flag_spec_CXX='' fi link_all_deplibs_CXX=yes allow_undefined_flag_CXX="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=func_echo_all archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" if test "$lt_cv_apple_cc_single_mod" != "yes"; then archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" fi else ld_shlibs_CXX=no fi ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; freebsd2.*) # C++ shared libraries reported to be fairly broken before # switch to ELF ld_shlibs_CXX=no ;; freebsd-elf*) archive_cmds_need_lc_CXX=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions ld_shlibs_CXX=yes ;; haiku*) archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' link_all_deplibs_CXX=yes ;; hpux9*) hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' hardcode_libdir_separator_CXX=: export_dynamic_flag_spec_CXX='${wl}-E' hardcode_direct_CXX=yes hardcode_minus_L_CXX=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aCC*) archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' hardcode_libdir_separator_CXX=: case $host_cpu in hppa*64*|ia64*) ;; *) export_dynamic_flag_spec_CXX='${wl}-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) hardcode_direct_CXX=no hardcode_shlibpath_var_CXX=no ;; *) hardcode_direct_CXX=yes hardcode_direct_absolute_CXX=yes hardcode_minus_L_CXX=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aCC*) case $host_cpu in hppa*64*) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then case $host_cpu in hppa*64*) archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; interix[3-9]*) hardcode_direct_CXX=no hardcode_shlibpath_var_CXX=no hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' fi fi link_all_deplibs_CXX=yes ;; esac hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: inherit_rpath_CXX=yes ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc* | ecpc* ) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; esac archive_cmds_need_lc_CXX=no hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in *pgCC\ [1-5].* | *pgcpp\ [1-5].*) prelink_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' old_archive_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ $RANLIB $oldlib' archive_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' archive_expsym_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; *) # Version 6 and above use weak symbols archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; esac hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec_CXX='-rpath $libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' ;; xl* | mpixl* | bgxl*) # IBM XL 8.0 on PPC, with GNU ld hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 no_undefined_flag_CXX=' -zdefs' archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' hardcode_libdir_flag_spec_CXX='-R$libdir' whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object_CXX=yes # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; m88k*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= hardcode_libdir_flag_spec_CXX='-R$libdir' hardcode_direct_CXX=yes hardcode_shlibpath_var_CXX=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; *nto* | *qnx*) ld_shlibs_CXX=yes ;; openbsd2*) # C++ shared libraries are fairly broken ld_shlibs_CXX=no ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct_CXX=yes hardcode_shlibpath_var_CXX=no hardcode_direct_absolute_CXX=yes archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' export_dynamic_flag_spec_CXX='${wl}-E' whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi output_verbose_link_cmd=func_echo_all else ld_shlibs_CXX=no fi ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' hardcode_libdir_separator_CXX=: # Archives containing C++ object files must be created using # the KAI C++ compiler. case $host in osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;; esac ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; cxx*) case $host in osf3*) allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ;; *) allow_undefined_flag_CXX=' -expect_unresolved \*' archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ $RM $lib.exp' hardcode_libdir_flag_spec_CXX='-rpath $libdir' ;; esac hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' case $host in osf3*) archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; *) archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; esac hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ archive_cmds_need_lc_CXX=yes no_undefined_flag_CXX=' -zdefs' archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' hardcode_libdir_flag_spec_CXX='-R$libdir' hardcode_shlibpath_var_CXX=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' ;; esac link_all_deplibs_CXX=yes output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then no_undefined_flag_CXX=' ${wl}-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' fi hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag_CXX='${wl}-z,text' archive_cmds_need_lc_CXX=no hardcode_shlibpath_var_CXX=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag_CXX='${wl}-z,text' allow_undefined_flag_CXX='${wl}-z,nodefs' archive_cmds_need_lc_CXX=no hardcode_shlibpath_var_CXX=no hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir' hardcode_libdir_separator_CXX=':' link_all_deplibs_CXX=yes export_dynamic_flag_spec_CXX='${wl}-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~ '"$old_archive_cmds_CXX" reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~ '"$reload_cmds_CXX" ;; *) archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 $as_echo "$ld_shlibs_CXX" >&6; } test "$ld_shlibs_CXX" = no && can_build_shared=no GCC_CXX="$GXX" LD_CXX="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... # Dependencies to place before and after the object being linked: predep_objects_CXX= postdep_objects_CXX= predeps_CXX= postdeps_CXX= compiler_lib_search_path_CXX= cat > conftest.$ac_ext <<_LT_EOF class Foo { public: Foo (void) { a = 0; } private: int a; }; _LT_EOF _lt_libdeps_save_CFLAGS=$CFLAGS case "$CC $CFLAGS " in #( *\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; *\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; *\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; esac if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then # Parse the compiler output and extract the necessary # objects, libraries and library flags. # Sentinel used to keep track of whether or not we are before # the conftest object file. pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do case ${prev}${p} in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. if test $p = "-L" || test $p = "-R"; then prev=$p continue fi # Expand the sysroot to ease extracting the directories later. if test -z "$prev"; then case $p in -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; esac fi case $p in =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; esac if test "$pre_test_object_deps_done" = no; then case ${prev} in -L | -R) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$compiler_lib_search_path_CXX"; then compiler_lib_search_path_CXX="${prev}${p}" else compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" fi ;; # The "-l" case would never come before the object being # linked, so don't bother handling this case. esac else if test -z "$postdeps_CXX"; then postdeps_CXX="${prev}${p}" else postdeps_CXX="${postdeps_CXX} ${prev}${p}" fi fi prev= ;; *.lto.$objext) ;; # Ignore GCC LTO objects *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then pre_test_object_deps_done=yes continue fi if test "$pre_test_object_deps_done" = no; then if test -z "$predep_objects_CXX"; then predep_objects_CXX="$p" else predep_objects_CXX="$predep_objects_CXX $p" fi else if test -z "$postdep_objects_CXX"; then postdep_objects_CXX="$p" else postdep_objects_CXX="$postdep_objects_CXX $p" fi fi ;; *) ;; # Ignore the rest. esac done # Clean up. rm -f a.out a.exe else echo "libtool.m4: error: problem compiling CXX test program" fi $RM -f confest.$objext CFLAGS=$_lt_libdeps_save_CFLAGS # PORTME: override above test on systems where it is broken case $host_os in interix[3-9]*) # Interix 3.5 installs completely hosed .la files for C++, so rather than # hack all around it, let's just trust "g++" to DTRT. predep_objects_CXX= postdep_objects_CXX= postdeps_CXX= ;; linux*) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac if test "$solaris_use_stlport4" != yes; then postdeps_CXX='-library=Cstd -library=Crun' fi ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac # Adding this requires a known-good setup of shared libraries for # Sun compiler versions before 5.6, else PIC objects from an old # archive will be linked into the output, leading to subtle bugs. if test "$solaris_use_stlport4" != yes; then postdeps_CXX='-library=Cstd -library=Crun' fi ;; esac ;; esac case " $postdeps_CXX " in *" -lc "*) archive_cmds_need_lc_CXX=no ;; esac compiler_lib_search_dirs_CXX= if test -n "${compiler_lib_search_path_CXX}"; then compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` fi lt_prog_compiler_wl_CXX= lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX= # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_CXX='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support lt_prog_compiler_pic_CXX='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic_CXX='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic_CXX='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all lt_prog_compiler_pic_CXX= ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. lt_prog_compiler_static_CXX= ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic_CXX=-Kconform_pic fi ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) ;; *) lt_prog_compiler_pic_CXX='-fPIC' ;; esac ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic_CXX='-fPIC -shared' ;; *) lt_prog_compiler_pic_CXX='-fPIC' ;; esac else case $host_os in aix[4-9]*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_CXX='-Bstatic' else lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic_CXX='-DDLL_EXPORT' ;; dgux*) case $cc_basename in ec++*) lt_prog_compiler_pic_CXX='-KPIC' ;; ghcx*) # Green Hills C++ Compiler lt_prog_compiler_pic_CXX='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then lt_prog_compiler_pic_CXX='+Z' fi ;; aCC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic_CXX='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # KAI C++ Compiler lt_prog_compiler_wl_CXX='--backend -Wl,' lt_prog_compiler_pic_CXX='-fPIC' ;; ecpc* ) # old Intel C++ for x86_64 which still supported -KPIC. lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-static' ;; icpc* ) # Intel C++, used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-fPIC' lt_prog_compiler_static_CXX='-static' ;; pgCC* | pgcpp*) # Portland Group C++ compiler lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-fpic' lt_prog_compiler_static_CXX='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX='-non_shared' ;; xlc* | xlC* | bgxl[cC]* | mpixl[cC]*) # IBM XL 8.0, 9.0 on PPC and BlueGene lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-qpic' lt_prog_compiler_static_CXX='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' lt_prog_compiler_wl_CXX='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) lt_prog_compiler_pic_CXX='-W c,exportall' ;; *) ;; esac ;; netbsd* | netbsdelf*-gnu) ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic_CXX='-fPIC -shared' ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) lt_prog_compiler_wl_CXX='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 lt_prog_compiler_pic_CXX='-pic' ;; cxx*) # Digital/Compaq C++ lt_prog_compiler_wl_CXX='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' lt_prog_compiler_wl_CXX='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler lt_prog_compiler_pic_CXX='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x lt_prog_compiler_pic_CXX='-pic' lt_prog_compiler_static_CXX='-Bstatic' ;; lcc*) # Lucid lt_prog_compiler_pic_CXX='-pic' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 lt_prog_compiler_pic_CXX='-KPIC' ;; *) ;; esac ;; vxworks*) ;; *) lt_prog_compiler_can_build_shared_CXX=no ;; esac fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_CXX= ;; *) lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 $as_echo_n "checking for $compiler option to produce PIC... " >&6; } if ${lt_cv_prog_compiler_pic_CXX+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5 $as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; } lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic_CXX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works_CXX=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works_CXX=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 $as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then case $lt_prog_compiler_pic_CXX in "" | " "*) ;; *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; esac else lt_prog_compiler_pic_CXX= lt_prog_compiler_can_build_shared_CXX=no fi fi # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } if ${lt_cv_prog_compiler_static_works_CXX+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works_CXX=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works_CXX=yes fi else lt_cv_prog_compiler_static_works_CXX=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5 $as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then : else lt_prog_compiler_static_CXX= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o_CXX=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_CXX=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 $as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o_CXX=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_CXX=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 $as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' case $host_os in aix[4-9]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global defined # symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) export_symbols_cmds_CXX="$ltdll_cmds" ;; cygwin* | mingw* | cegcc*) case $cc_basename in cl*) exclude_expsyms_CXX='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' ;; *) export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' ;; esac ;; linux* | k*bsd*-gnu | gnu*) link_all_deplibs_CXX=no ;; *) export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 $as_echo "$ld_shlibs_CXX" >&6; } test "$ld_shlibs_CXX" = no && can_build_shared=no with_gnu_ld_CXX=$with_gnu_ld # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc_CXX" in x|xyes) # Assume -lc should be added archive_cmds_need_lc_CXX=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds_CXX in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then : $as_echo_n "(cached) " >&6 else $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl_CXX pic_flag=$lt_prog_compiler_pic_CXX compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag_CXX allow_undefined_flag_CXX= if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then lt_cv_archive_cmds_need_lc_CXX=no else lt_cv_archive_cmds_need_lc_CXX=yes fi allow_undefined_flag_CXX=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5 $as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; } archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX ;; esac fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' library_names_spec='${libname}.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec="$LIB" if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[23].*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; haiku*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=yes sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[3-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH if ${lt_cv_shlibpath_overrides_runpath+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\"" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_link "$LINENO"; then : if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : lt_cv_shlibpath_overrides_runpath=yes fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS libdir=$save_libdir fi shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action_CXX= if test -n "$hardcode_libdir_flag_spec_CXX" || test -n "$runpath_var_CXX" || test "X$hardcode_automatic_CXX" = "Xyes" ; then # We can hardcode non-existent directories. if test "$hardcode_direct_CXX" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no && test "$hardcode_minus_L_CXX" != no; then # Linking always hardcodes the temporary library directory. hardcode_action_CXX=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action_CXX=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action_CXX=unsupported fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5 $as_echo "$hardcode_action_CXX" >&6; } if test "$hardcode_action_CXX" = relink || test "$inherit_rpath_CXX" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi fi # test -n "$compiler" CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld fi # test "$_lt_caught_CXX_error" != yes ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Checks for libraries. # Checks for header files. for ac_header in stdlib.h do : ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default" if test "x$ac_cv_header_stdlib_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_STDLIB_H 1 _ACEOF fi done # Checks for typedefs, structures, and compiler characteristics. # Checks for library functions. for ac_func in atexit setlocale do : as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done # Check whether --enable-schemas-compile was given. if test "${enable_schemas_compile+set}" = set; then : enableval=$enable_schemas_compile; case ${enableval} in yes) GSETTINGS_DISABLE_SCHEMAS_COMPILE="" ;; no) GSETTINGS_DISABLE_SCHEMAS_COMPILE="1" ;; *) as_fn_error $? "bad value ${enableval} for --enable-schemas-compile" "$LINENO" 5 ;; esac fi if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_PKG_CONFIG+:} false; then : $as_echo_n "(cached) " >&6 else case $PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi PKG_CONFIG=$ac_cv_path_PKG_CONFIG if test -n "$PKG_CONFIG"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 $as_echo "$PKG_CONFIG" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_PKG_CONFIG"; then ac_pt_PKG_CONFIG=$PKG_CONFIG # Extract the first word of "pkg-config", so it can be a program name with args. set dummy pkg-config; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : $as_echo_n "(cached) " >&6 else case $ac_pt_PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG if test -n "$ac_pt_PKG_CONFIG"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 $as_echo "$ac_pt_PKG_CONFIG" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_PKG_CONFIG" = x; then PKG_CONFIG="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac PKG_CONFIG=$ac_pt_PKG_CONFIG fi else PKG_CONFIG="$ac_cv_path_PKG_CONFIG" fi fi if test -n "$PKG_CONFIG"; then _pkg_min_version=0.16 { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 $as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } PKG_CONFIG="" fi fi gsettingsschemadir=${datadir}/glib-2.0/schemas if test x$cross_compiling != xyes; then GLIB_COMPILE_SCHEMAS=`$PKG_CONFIG --variable glib_compile_schemas gio-2.0` else # Extract the first word of "glib-compile-schemas", so it can be a program name with args. set dummy glib-compile-schemas; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_GLIB_COMPILE_SCHEMAS+:} false; then : $as_echo_n "(cached) " >&6 else case $GLIB_COMPILE_SCHEMAS in [\\/]* | ?:[\\/]*) ac_cv_path_GLIB_COMPILE_SCHEMAS="$GLIB_COMPILE_SCHEMAS" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_GLIB_COMPILE_SCHEMAS="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi GLIB_COMPILE_SCHEMAS=$ac_cv_path_GLIB_COMPILE_SCHEMAS if test -n "$GLIB_COMPILE_SCHEMAS"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLIB_COMPILE_SCHEMAS" >&5 $as_echo "$GLIB_COMPILE_SCHEMAS" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test "x$GLIB_COMPILE_SCHEMAS" = "x"; then as_fn_error $? "glib-compile-schemas not found." "$LINENO" 5 else : fi GSETTINGS_RULES=' .PHONY : uninstall-gsettings-schemas install-gsettings-schemas clean-gsettings-schemas mostlyclean-am: clean-gsettings-schemas gsettings__enum_file = $(addsuffix .enums.xml,$(gsettings_ENUM_NAMESPACE)) %.gschema.valid: %.gschema.xml $(gsettings__enum_file) $(AM_V_GEN) $(GLIB_COMPILE_SCHEMAS) --strict --dry-run $(addprefix --schema-file=,$(gsettings__enum_file)) --schema-file=$< && mkdir -p $(@D) && touch $@ all-am: $(gsettings_SCHEMAS:.xml=.valid) uninstall-am: uninstall-gsettings-schemas install-data-am: install-gsettings-schemas .SECONDARY: $(gsettings_SCHEMAS) install-gsettings-schemas: $(gsettings_SCHEMAS) $(gsettings__enum_file) @$(NORMAL_INSTALL) if test -n "$^"; then \ test -z "$(gsettingsschemadir)" || $(MKDIR_P) "$(DESTDIR)$(gsettingsschemadir)"; \ $(INSTALL_DATA) $^ "$(DESTDIR)$(gsettingsschemadir)"; \ test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir); \ fi uninstall-gsettings-schemas: @$(NORMAL_UNINSTALL) @list='\''$(gsettings_SCHEMAS) $(gsettings__enum_file)'\''; test -n "$(gsettingsschemadir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e '\''s|^.*/||'\''`; \ test -n "$$files" || exit 0; \ echo " ( cd '\''$(DESTDIR)$(gsettingsschemadir)'\'' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(gsettingsschemadir)" && rm -f $$files test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir) clean-gsettings-schemas: rm -f $(gsettings_SCHEMAS:.xml=.valid) $(gsettings__enum_file) ifdef gsettings_ENUM_NAMESPACE $(gsettings__enum_file): $(gsettings_ENUM_FILES) $(AM_V_GEN) glib-mkenums --comments '\'''\'' --fhead "" --vhead " <@type@ id='\''$(gsettings_ENUM_NAMESPACE).@EnumName@'\''>" --vprod " " --vtail " " --ftail "" $^ > $@.tmp && mv $@.tmp $@ endif ' # Extract the first word of "glib-compile-resources", so it can be a program name with args. set dummy glib-compile-resources; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_GLIB_COMPILE_RESOURCES+:} false; then : $as_echo_n "(cached) " >&6 else case $GLIB_COMPILE_RESOURCES in [\\/]* | ?:[\\/]*) ac_cv_path_GLIB_COMPILE_RESOURCES="$GLIB_COMPILE_RESOURCES" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_GLIB_COMPILE_RESOURCES="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi GLIB_COMPILE_RESOURCES=$ac_cv_path_GLIB_COMPILE_RESOURCES if test -n "$GLIB_COMPILE_RESOURCES"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLIB_COMPILE_RESOURCES" >&5 $as_echo "$GLIB_COMPILE_RESOURCES" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "desktop-file-validate", so it can be a program name with args. set dummy desktop-file-validate; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_DESKTOP_FILE_VALIDATE+:} false; then : $as_echo_n "(cached) " >&6 else case $DESKTOP_FILE_VALIDATE in [\\/]* | ?:[\\/]*) ac_cv_path_DESKTOP_FILE_VALIDATE="$DESKTOP_FILE_VALIDATE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_DESKTOP_FILE_VALIDATE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_DESKTOP_FILE_VALIDATE" && ac_cv_path_DESKTOP_FILE_VALIDATE="/bin/true" ;; esac fi DESKTOP_FILE_VALIDATE=$ac_cv_path_DESKTOP_FILE_VALIDATE if test -n "$DESKTOP_FILE_VALIDATE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DESKTOP_FILE_VALIDATE" >&5 $as_echo "$DESKTOP_FILE_VALIDATE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "appstream-util", so it can be a program name with args. set dummy appstream-util; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_APPDATA_VALIDATE+:} false; then : $as_echo_n "(cached) " >&6 else case $APPDATA_VALIDATE in [\\/]* | ?:[\\/]*) ac_cv_path_APPDATA_VALIDATE="$APPDATA_VALIDATE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_APPDATA_VALIDATE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_APPDATA_VALIDATE" && ac_cv_path_APPDATA_VALIDATE="/bin/true" ;; esac fi APPDATA_VALIDATE=$ac_cv_path_APPDATA_VALIDATE if test -n "$APPDATA_VALIDATE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $APPDATA_VALIDATE" >&5 $as_echo "$APPDATA_VALIDATE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi YELP_LC_MEDIA_LINKS=true YELP_LC_DIST=true for yelpopt in ; do case $yelpopt in lc-media-links) YELP_LC_MEDIA_LINKS=true ;; no-lc-media-links) YELP_LC_MEDIA_LINKS= ;; lc-dist) YELP_LC_DIST=true ;; no-lc-dist) YELP_LC_DIST= ;; *) as_fn_error $? "Unrecognized YELP_HELP_INIT option $yelpopt\"" "$LINENO" 5 ;; esac done; # Check whether --with-help-dir was given. if test "${with_help_dir+set}" = set; then : withval=$with_help_dir; else with_help_dir='${datadir}/help' fi HELP_DIR="$with_help_dir" # Extract the first word of "itstool", so it can be a program name with args. set dummy itstool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ITSTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ITSTOOL"; then ac_cv_prog_ITSTOOL="$ITSTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ITSTOOL="itstool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ITSTOOL=$ac_cv_prog_ITSTOOL if test -n "$ITSTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ITSTOOL" >&5 $as_echo "$ITSTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test x"$ITSTOOL" = x; then as_fn_error $? "itstool not found" "$LINENO" 5 fi # Extract the first word of "xmllint", so it can be a program name with args. set dummy xmllint; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_XMLLINT+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$XMLLINT"; then ac_cv_prog_XMLLINT="$XMLLINT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_XMLLINT="xmllint" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi XMLLINT=$ac_cv_prog_XMLLINT if test -n "$XMLLINT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XMLLINT" >&5 $as_echo "$XMLLINT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test x"$XMLLINT" = x; then as_fn_error $? "xmllint not found" "$LINENO" 5 fi YELP_HELP_RULES=' HELP_ID ?= HELP_POT ?= HELP_FILES ?= HELP_EXTRA ?= HELP_MEDIA ?= HELP_LINGUAS ?= _HELP_LINGUAS = $(if $(filter environment,$(origin LINGUAS)),$(filter $(LINGUAS),$(HELP_LINGUAS)),$(HELP_LINGUAS)) _HELP_POTFILE = $(if $(HELP_POT),$(HELP_POT),$(if $(HELP_ID),$(HELP_ID).pot)) _HELP_POFILES = $(if $(HELP_ID),$(foreach lc,$(_HELP_LINGUAS),$(lc)/$(lc).po)) _HELP_MOFILES = $(patsubst %.po,%.mo,$(_HELP_POFILES)) _HELP_C_FILES = $(foreach f,$(HELP_FILES),C/$(f)) _HELP_C_EXTRA = $(foreach f,$(HELP_EXTRA),C/$(f)) _HELP_C_MEDIA = $(foreach f,$(HELP_MEDIA),C/$(f)) _HELP_LC_FILES = $(foreach lc,$(_HELP_LINGUAS),$(foreach f,$(HELP_FILES),$(lc)/$(f))) _HELP_LC_STAMPS = $(foreach lc,$(_HELP_LINGUAS),$(lc)/$(lc).stamp) _HELP_DEFAULT_V = $(if $(AM_DEFAULT_VERBOSITY),$(AM_DEFAULT_VERBOSITY),1) _HELP_V = $(if $(V),$(V),$(_HELP_DEFAULT_V)) _HELP_LC_VERBOSE = $(_HELP_LC_VERBOSE_$(_HELP_V)) _HELP_LC_VERBOSE_ = $(_HELP_LC_VERBOSE_$(_HELP_DEFAULT_V)) _HELP_LC_VERBOSE_0 = @echo " GEN "$(dir $@); all: $(_HELP_C_FILES) $(_HELP_C_EXTRA) $(_HELP_C_MEDIA) $(_HELP_LC_FILES) $(_HELP_POFILES) .PHONY: pot pot: $(_HELP_POTFILE) $(_HELP_POTFILE): $(_HELP_C_FILES) $(_HELP_C_EXTRA) $(_HELP_C_MEDIA) $(AM_V_GEN)if test -d "C"; then d=; else d="$(srcdir)/"; fi; \ $(ITSTOOL) -o "$@" $(foreach f,$(_HELP_C_FILES),"$${d}$(f)") .PHONY: repo repo: $(_HELP_POTFILE) $(AM_V_at)for po in $(_HELP_POFILES); do \ if test "x$(_HELP_V)" = "x0"; then echo " GEN $${po}"; fi; \ msgmerge -q -o "$${po}" "$${po}" "$(_HELP_POTFILE)"; \ done $(_HELP_POFILES): $(AM_V_at)if ! test -d "$(dir $@)"; then mkdir "$(dir $@)"; fi $(AM_V_at)if test ! -f "$@" -a -f "$(srcdir)/$@"; then cp "$(srcdir)/$@" "$@"; fi $(AM_V_GEN)if ! test -f "$@"; then \ (cd "$(dir $@)" && \ $(ITSTOOL) -o "$(notdir $@).tmp" $(_HELP_C_FILES) && \ mv "$(notdir $@).tmp" "$(notdir $@)"); \ else \ (cd "$(dir $@)" && \ $(ITSTOOL) -o "$(notdir $@).tmp" $(_HELP_C_FILES) && \ msgmerge -o "$(notdir $@)" "$(notdir $@)" "$(notdir $@).tmp" && \ rm "$(notdir $@).tmp"); \ fi $(_HELP_MOFILES): %.mo: %.po $(AM_V_at)if ! test -d "$(dir $@)"; then mkdir "$(dir $@)"; fi $(AM_V_GEN)msgfmt -o "$@" "$<" $(_HELP_LC_FILES): $(_HELP_LINGUAS) $(_HELP_LINGUAS): $(_HELP_LC_STAMPS) $(_HELP_LC_STAMPS): %.stamp: %.mo $(_HELP_LC_STAMPS): $(_HELP_C_FILES) $(_HELP_C_EXTRA) $(AM_V_at)if ! test -d "$(dir $@)"; then mkdir "$(dir $@)"; fi $(_HELP_LC_VERBOSE)if test -d "C"; then d="../"; else d="$(abs_srcdir)/"; fi; \ mo="$(dir $@)$(patsubst %/$(notdir $@),%,$@).mo"; \ if test -f "$${mo}"; then mo="../$${mo}"; else mo="$(abs_srcdir)/$${mo}"; fi; \ (cd "$(dir $@)" && $(ITSTOOL) -m "$${mo}" $(foreach f,$(_HELP_C_FILES),$${d}/$(f))) && \ touch "$@" .PHONY: clean-help mostlyclean-am: $(if $(HELP_ID),clean-help) clean-help: rm -f $(_HELP_LC_FILES) $(_HELP_LC_STAMPS) $(_HELP_MOFILES) EXTRA_DIST ?= EXTRA_DIST += $(_HELP_C_EXTRA) $(_HELP_C_MEDIA) EXTRA_DIST += $(if $(YELP_LC_DIST),$(foreach lc,$(HELP_LINGUAS),$(lc)/$(lc).stamp)) EXTRA_DIST += $(foreach lc,$(HELP_LINGUAS),$(lc)/$(lc).po) EXTRA_DIST += $(foreach f,$(HELP_MEDIA),$(foreach lc,$(HELP_LINGUAS),$(wildcard $(lc)/$(f)))) distdir: distdir-help-files distdir-help-files: $(_HELP_LC_FILES) @for lc in C $(if $(YELP_LC_DIST),$(HELP_LINGUAS)) ; do \ $(MKDIR_P) "$(distdir)/$$lc"; \ for file in $(HELP_FILES); do \ if test -f "$$lc/$$file"; then d=./; else d=$(srcdir)/; fi; \ cp -p "$$d$$lc/$$file" "$(distdir)/$$lc/" || exit 1; \ done; \ done; \ .PHONY: check-help check: check-help check-help: for lc in C $(_HELP_LINGUAS); do \ if test -d "$$lc"; \ then d=; \ xmlpath="$$lc"; \ else \ d="$(srcdir)/"; \ xmlpath="$$lc:$(srcdir)/$$lc"; \ fi; \ for page in $(HELP_FILES); do \ echo "$(XMLLINT) --noout --noent --path $$xmlpath --xinclude $$d$$lc/$$page"; \ $(XMLLINT) --noout --noent --path "$$xmlpath" --xinclude "$$d$$lc/$$page"; \ done; \ done .PHONY: install-help install-data-am: $(if $(HELP_ID),install-help) install-help: $(_HELP_LC_FILES) @for lc in C $(_HELP_LINGUAS); do \ $(mkinstalldirs) "$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)" || exit 1; \ done @for lc in C $(_HELP_LINGUAS); do for f in $(HELP_FILES); do \ if test -f "$$lc/$$f"; then d=; else d="$(srcdir)/"; fi; \ helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ if ! test -d "$$helpdir"; then $(mkinstalldirs) "$$helpdir"; fi; \ echo "$(INSTALL_DATA) $$d$$lc/$$f $$helpdir`basename $$f`"; \ $(INSTALL_DATA) "$$d$$lc/$$f" "$$helpdir`basename $$f`" || exit 1; \ done; done @for f in $(_HELP_C_EXTRA); do \ lc=`dirname "$$f"`; lc=`basename "$$lc"`; \ if test -f "$$f"; then d=; else d="$(srcdir)/"; fi; \ helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ if ! test -d "$$helpdir"; then $(mkinstalldirs) "$$helpdir"; fi; \ echo "$(INSTALL_DATA) $$d$$f $$helpdir`basename $$f`"; \ $(INSTALL_DATA) "$$d$$f" "$$helpdir`basename $$f`" || exit 1; \ done @for f in $(HELP_MEDIA); do \ for lc in C $(_HELP_LINGUAS); do \ if test -f "$$lc$$f"; then d=; else d="$(srcdir)/"; fi; \ helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ mdir=`dirname "$$f"`; \ if test "x$mdir" = "x."; then mdir=""; fi; \ if ! test -d "$$helpdir$$mdir"; then $(mkinstalldirs) "$$helpdir$$mdir"; fi; \ if test -f "$$d$$lc/$$f"; then \ echo "$(INSTALL_DATA) $$d$$lc/$$f $$helpdir$$f"; \ $(INSTALL_DATA) "$$d$$lc/$$f" "$$helpdir$$f" || exit 1; \ elif test "x$$lc" != "xC"; then \ if test "x$(YELP_LC_MEDIA_LINKS)" != "x"; then \ echo "$(LN_S) -f $(HELP_DIR)/C/$(HELP_ID)/$$f $$helpdir$$f"; \ $(LN_S) -f "$(HELP_DIR)/C/$(HELP_ID)/$$f" "$$helpdir$$f" || exit 1; \ fi; \ fi; \ done; \ done .PHONY: uninstall-help uninstall-am: $(if $(HELP_ID),uninstall-help) uninstall-help: for lc in C $(_HELP_LINGUAS); do for f in $(HELP_FILES); do \ helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ echo "rm -f $$helpdir`basename $$f`"; \ rm -f "$$helpdir`basename $$f`"; \ done; done @for f in $(_HELP_C_EXTRA); do \ lc=`dirname "$$f"`; lc=`basename "$$lc"`; \ helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ echo "rm -f $$helpdir`basename $$f`"; \ rm -f "$$helpdir`basename $$f`"; \ done @for f in $(HELP_MEDIA); do \ for lc in C $(_HELP_LINGUAS); do \ helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ echo "rm -f $$helpdir$$f"; \ rm -f "$$helpdir$$f"; \ done; \ done; ' GTK_MIN_VERSION=3.10.0 pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTK" >&5 $as_echo_n "checking for GTK... " >&6; } if test -n "$GTK_CFLAGS"; then pkg_cv_GTK_CFLAGS="$GTK_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-3.0 >= \$GTK_MIN_VERSION, gmodule-2.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "gtk+-3.0 >= $GTK_MIN_VERSION, gmodule-2.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GTK_CFLAGS=`$PKG_CONFIG --cflags "gtk+-3.0 >= $GTK_MIN_VERSION, gmodule-2.0" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$GTK_LIBS"; then pkg_cv_GTK_LIBS="$GTK_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-3.0 >= \$GTK_MIN_VERSION, gmodule-2.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "gtk+-3.0 >= $GTK_MIN_VERSION, gmodule-2.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GTK_LIBS=`$PKG_CONFIG --libs "gtk+-3.0 >= $GTK_MIN_VERSION, gmodule-2.0" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then GTK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gtk+-3.0 >= $GTK_MIN_VERSION, gmodule-2.0" 2>&1` else GTK_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gtk+-3.0 >= $GTK_MIN_VERSION, gmodule-2.0" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$GTK_PKG_ERRORS" >&5 as_fn_error $? "Package requirements (gtk+-3.0 >= $GTK_MIN_VERSION, gmodule-2.0) were not met: $GTK_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables GTK_CFLAGS and GTK_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables GTK_CFLAGS and GTK_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details" "$LINENO" 5; } else GTK_CFLAGS=$pkg_cv_GTK_CFLAGS GTK_LIBS=$pkg_cv_GTK_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi WARNINGCFLAGS="-Wall" # Check whether --with-libreoffice was given. if test "${with_libreoffice+set}" = set; then : withval=$with_libreoffice; else with_libreoffice=yes fi if test "$with_libreoffice" = "yes"; then LIBREOFFICE_TRUE= LIBREOFFICE_FALSE='#' else LIBREOFFICE_TRUE='#' LIBREOFFICE_FALSE= fi # needed? gtk_doc_requires="gtk-doc >= 1.14" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gtk-doc" >&5 $as_echo_n "checking for gtk-doc... " >&6; } if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$gtk_doc_requires\""; } >&5 ($PKG_CONFIG --exists --print-errors "$gtk_doc_requires") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then have_gtk_doc=yes else have_gtk_doc=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_gtk_doc" >&5 $as_echo "$have_gtk_doc" >&6; } if test "$have_gtk_doc" = "no"; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: You will not be able to create source packages with 'make dist' because $gtk_doc_requires is not found." >&5 $as_echo "$as_me: WARNING: You will not be able to create source packages with 'make dist' because $gtk_doc_requires is not found." >&2;} fi # Extract the first word of "gtkdoc-check", so it can be a program name with args. set dummy gtkdoc-check; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_GTKDOC_CHECK+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$GTKDOC_CHECK"; then ac_cv_prog_GTKDOC_CHECK="$GTKDOC_CHECK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_GTKDOC_CHECK="gtkdoc-check.test" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi GTKDOC_CHECK=$ac_cv_prog_GTKDOC_CHECK if test -n "$GTKDOC_CHECK"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GTKDOC_CHECK" >&5 $as_echo "$GTKDOC_CHECK" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "gtkdoc-check", so it can be a program name with args. set dummy gtkdoc-check; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_GTKDOC_CHECK_PATH+:} false; then : $as_echo_n "(cached) " >&6 else case $GTKDOC_CHECK_PATH in [\\/]* | ?:[\\/]*) ac_cv_path_GTKDOC_CHECK_PATH="$GTKDOC_CHECK_PATH" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_GTKDOC_CHECK_PATH="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi GTKDOC_CHECK_PATH=$ac_cv_path_GTKDOC_CHECK_PATH if test -n "$GTKDOC_CHECK_PATH"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GTKDOC_CHECK_PATH" >&5 $as_echo "$GTKDOC_CHECK_PATH" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi for ac_prog in gtkdoc-rebase do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_GTKDOC_REBASE+:} false; then : $as_echo_n "(cached) " >&6 else case $GTKDOC_REBASE in [\\/]* | ?:[\\/]*) ac_cv_path_GTKDOC_REBASE="$GTKDOC_REBASE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_GTKDOC_REBASE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi GTKDOC_REBASE=$ac_cv_path_GTKDOC_REBASE if test -n "$GTKDOC_REBASE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GTKDOC_REBASE" >&5 $as_echo "$GTKDOC_REBASE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$GTKDOC_REBASE" && break done test -n "$GTKDOC_REBASE" || GTKDOC_REBASE="true" # Extract the first word of "gtkdoc-mkpdf", so it can be a program name with args. set dummy gtkdoc-mkpdf; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_GTKDOC_MKPDF+:} false; then : $as_echo_n "(cached) " >&6 else case $GTKDOC_MKPDF in [\\/]* | ?:[\\/]*) ac_cv_path_GTKDOC_MKPDF="$GTKDOC_MKPDF" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_GTKDOC_MKPDF="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi GTKDOC_MKPDF=$ac_cv_path_GTKDOC_MKPDF if test -n "$GTKDOC_MKPDF"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GTKDOC_MKPDF" >&5 $as_echo "$GTKDOC_MKPDF" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Check whether --with-html-dir was given. if test "${with_html_dir+set}" = set; then : withval=$with_html_dir; else with_html_dir='${datadir}/gtk-doc/html' fi HTML_DIR="$with_html_dir" # Check whether --enable-gtk-doc was given. if test "${enable_gtk_doc+set}" = set; then : enableval=$enable_gtk_doc; else enable_gtk_doc=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build gtk-doc documentation" >&5 $as_echo_n "checking whether to build gtk-doc documentation... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_gtk_doc" >&5 $as_echo "$enable_gtk_doc" >&6; } if test "x$enable_gtk_doc" = "xyes" && test "$have_gtk_doc" = "no"; then as_fn_error $? " You must have $gtk_doc_requires installed to build documentation for $PACKAGE_NAME. Please install gtk-doc or disable building the documentation by adding '--disable-gtk-doc' to '$0'." "$LINENO" 5 fi if test "x$PACKAGE_NAME" != "xglib"; then pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTKDOC_DEPS" >&5 $as_echo_n "checking for GTKDOC_DEPS... " >&6; } if test -n "$GTKDOC_DEPS_CFLAGS"; then pkg_cv_GTKDOC_DEPS_CFLAGS="$GTKDOC_DEPS_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GTKDOC_DEPS_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$GTKDOC_DEPS_LIBS"; then pkg_cv_GTKDOC_DEPS_LIBS="$GTKDOC_DEPS_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GTKDOC_DEPS_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then GTKDOC_DEPS_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0" 2>&1` else GTKDOC_DEPS_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$GTKDOC_DEPS_PKG_ERRORS" >&5 : elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } : else GTKDOC_DEPS_CFLAGS=$pkg_cv_GTKDOC_DEPS_CFLAGS GTKDOC_DEPS_LIBS=$pkg_cv_GTKDOC_DEPS_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi fi # Check whether --enable-gtk-doc-html was given. if test "${enable_gtk_doc_html+set}" = set; then : enableval=$enable_gtk_doc_html; else enable_gtk_doc_html=yes fi # Check whether --enable-gtk-doc-pdf was given. if test "${enable_gtk_doc_pdf+set}" = set; then : enableval=$enable_gtk_doc_pdf; else enable_gtk_doc_pdf=no fi if test -z "$GTKDOC_MKPDF"; then enable_gtk_doc_pdf=no fi if test -z "$AM_DEFAULT_VERBOSITY"; then AM_DEFAULT_VERBOSITY=1 fi if test x$have_gtk_doc = xyes; then HAVE_GTK_DOC_TRUE= HAVE_GTK_DOC_FALSE='#' else HAVE_GTK_DOC_TRUE='#' HAVE_GTK_DOC_FALSE= fi if test x$enable_gtk_doc = xyes; then ENABLE_GTK_DOC_TRUE= ENABLE_GTK_DOC_FALSE='#' else ENABLE_GTK_DOC_TRUE='#' ENABLE_GTK_DOC_FALSE= fi if test x$enable_gtk_doc_html = xyes; then GTK_DOC_BUILD_HTML_TRUE= GTK_DOC_BUILD_HTML_FALSE='#' else GTK_DOC_BUILD_HTML_TRUE='#' GTK_DOC_BUILD_HTML_FALSE= fi if test x$enable_gtk_doc_pdf = xyes; then GTK_DOC_BUILD_PDF_TRUE= GTK_DOC_BUILD_PDF_FALSE='#' else GTK_DOC_BUILD_PDF_TRUE='#' GTK_DOC_BUILD_PDF_FALSE= fi if test -n "$LIBTOOL"; then GTK_DOC_USE_LIBTOOL_TRUE= GTK_DOC_USE_LIBTOOL_FALSE='#' else GTK_DOC_USE_LIBTOOL_TRUE='#' GTK_DOC_USE_LIBTOOL_FALSE= fi if test -n "$GTKDOC_REBASE"; then GTK_DOC_USE_REBASE_TRUE= GTK_DOC_USE_REBASE_FALSE='#' else GTK_DOC_USE_REBASE_TRUE='#' GTK_DOC_USE_REBASE_FALSE= fi ac_config_files="$ac_config_files Makefile data/Makefile data/icons/Makefile docs/Makefile help/Makefile libreoffice/Makefile po/Makefile.in src/Makefile" subdirs="$subdirs libparlatype" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then if test "x$cache_file" != "x/dev/null"; then { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} if test ! -f "$cache_file" || test -h "$cache_file"; then cat confcache >"$cache_file" else case $cache_file in #( */* | ?:*) mv -f confcache "$cache_file"$$ && mv -f "$cache_file"$$ "$cache_file" ;; #( *) mv -f confcache "$cache_file" ;; esac fi fi else { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs { $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 $as_echo_n "checking that generated files are newer than configure... " >&6; } if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 $as_echo "done" >&6; } if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' else am__EXEEXT_TRUE='#' am__EXEEXT_FALSE= fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then as_fn_error $? "conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi ac_config_commands="$ac_config_commands po/stamp-it" if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCXX\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${LIBREOFFICE_TRUE}" && test -z "${LIBREOFFICE_FALSE}"; then as_fn_error $? "conditional \"LIBREOFFICE\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${HAVE_GTK_DOC_TRUE}" && test -z "${HAVE_GTK_DOC_FALSE}"; then as_fn_error $? "conditional \"HAVE_GTK_DOC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${ENABLE_GTK_DOC_TRUE}" && test -z "${ENABLE_GTK_DOC_FALSE}"; then as_fn_error $? "conditional \"ENABLE_GTK_DOC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${GTK_DOC_BUILD_HTML_TRUE}" && test -z "${GTK_DOC_BUILD_HTML_FALSE}"; then as_fn_error $? "conditional \"GTK_DOC_BUILD_HTML\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${GTK_DOC_BUILD_PDF_TRUE}" && test -z "${GTK_DOC_BUILD_PDF_FALSE}"; then as_fn_error $? "conditional \"GTK_DOC_BUILD_PDF\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${GTK_DOC_USE_LIBTOOL_TRUE}" && test -z "${GTK_DOC_USE_LIBTOOL_FALSE}"; then as_fn_error $? "conditional \"GTK_DOC_USE_LIBTOOL\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${GTK_DOC_USE_REBASE_TRUE}" && test -z "${GTK_DOC_USE_REBASE_FALSE}"; then as_fn_error $? "conditional \"GTK_DOC_USE_REBASE\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi : "${CONFIG_STATUS=./config.status}" ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by parlatype $as_me 1.5.4, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to . parlatype home page: ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ parlatype config.status 1.5.4 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" Copyright (C) 2012 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; --*=) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg= ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header as_fn_error $? "ambiguous option: \`$1' Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error $? "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`' predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`' postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`' predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`' postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`' compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`' LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`' reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`' reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`' old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`' compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`' GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`' lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`' archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`' enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`' export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`' old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`' old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`' archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`' archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`' module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`' module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`' with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`' allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`' no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`' hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`' hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`' hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`' hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`' hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`' hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`' inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`' link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`' always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`' export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`' exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`' include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`' prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`' postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`' file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`' hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`' compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`' predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`' postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`' predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`' postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`' compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`' LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$1 _LTECHO_EOF' } # Quote evaled strings. for var in SHELL \ ECHO \ PATH_SEPARATOR \ SED \ GREP \ EGREP \ FGREP \ LD \ NM \ LN_S \ lt_SP2NL \ lt_NL2SP \ reload_flag \ OBJDUMP \ deplibs_check_method \ file_magic_cmd \ file_magic_glob \ want_nocaseglob \ DLLTOOL \ sharedlib_from_linklib_cmd \ AR \ AR_FLAGS \ archiver_list_spec \ STRIP \ RANLIB \ CC \ CFLAGS \ compiler \ lt_cv_sys_global_symbol_pipe \ lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ nm_file_list_spec \ lt_prog_compiler_no_builtin_flag \ lt_prog_compiler_pic \ lt_prog_compiler_wl \ lt_prog_compiler_static \ lt_cv_prog_compiler_c_o \ need_locks \ MANIFEST_TOOL \ DSYMUTIL \ NMEDIT \ LIPO \ OTOOL \ OTOOL64 \ shrext_cmds \ export_dynamic_flag_spec \ whole_archive_flag_spec \ compiler_needs_object \ with_gnu_ld \ allow_undefined_flag \ no_undefined_flag \ hardcode_libdir_flag_spec \ hardcode_libdir_separator \ exclude_expsyms \ include_expsyms \ file_list_spec \ variables_saved_for_relink \ libname_spec \ library_names_spec \ soname_spec \ install_override_mode \ finish_eval \ old_striplib \ striplib \ compiler_lib_search_dirs \ predep_objects \ postdep_objects \ predeps \ postdeps \ compiler_lib_search_path \ LD_CXX \ reload_flag_CXX \ compiler_CXX \ lt_prog_compiler_no_builtin_flag_CXX \ lt_prog_compiler_pic_CXX \ lt_prog_compiler_wl_CXX \ lt_prog_compiler_static_CXX \ lt_cv_prog_compiler_c_o_CXX \ export_dynamic_flag_spec_CXX \ whole_archive_flag_spec_CXX \ compiler_needs_object_CXX \ with_gnu_ld_CXX \ allow_undefined_flag_CXX \ no_undefined_flag_CXX \ hardcode_libdir_flag_spec_CXX \ hardcode_libdir_separator_CXX \ exclude_expsyms_CXX \ include_expsyms_CXX \ file_list_spec_CXX \ compiler_lib_search_dirs_CXX \ predep_objects_CXX \ postdep_objects_CXX \ predeps_CXX \ postdeps_CXX \ compiler_lib_search_path_CXX; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in reload_cmds \ old_postinstall_cmds \ old_postuninstall_cmds \ old_archive_cmds \ extract_expsyms_cmds \ old_archive_from_new_cmds \ old_archive_from_expsyms_cmds \ archive_cmds \ archive_expsym_cmds \ module_cmds \ module_expsym_cmds \ export_symbols_cmds \ prelink_cmds \ postlink_cmds \ postinstall_cmds \ postuninstall_cmds \ finish_cmds \ sys_lib_search_path_spec \ sys_lib_dlsearch_path_spec \ reload_cmds_CXX \ old_archive_cmds_CXX \ old_archive_from_new_cmds_CXX \ old_archive_from_expsyms_cmds_CXX \ archive_cmds_CXX \ archive_expsym_cmds_CXX \ module_cmds_CXX \ module_expsym_cmds_CXX \ export_symbols_cmds_CXX \ prelink_cmds_CXX \ postlink_cmds_CXX; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done ac_aux_dir='$ac_aux_dir' xsi_shell='$xsi_shell' lt_shell_append='$lt_shell_append' # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi PACKAGE='$PACKAGE' VERSION='$VERSION' TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile' _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "data/Makefile") CONFIG_FILES="$CONFIG_FILES data/Makefile" ;; "data/icons/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/Makefile" ;; "docs/Makefile") CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;; "help/Makefile") CONFIG_FILES="$CONFIG_FILES help/Makefile" ;; "libreoffice/Makefile") CONFIG_FILES="$CONFIG_FILES libreoffice/Makefile" ;; "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "po/stamp-it") CONFIG_COMMANDS="$CONFIG_COMMANDS po/stamp-it" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= ac_tmp= trap 'exit_status=$? : "${ac_tmp:=$tmp}" { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ac_tmp=$tmp # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$ac_tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove sole $(srcdir), # ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ h s/// s/^/:/ s/[ ]*$/:/ s/:\$(srcdir):/:/g s/:\${srcdir}:/:/g s/:@srcdir@:/:/g s/^:*// s/:*$// x s/\(=[ ]*\).*/\1/ G s/\n// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$ac_tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_tt=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_tt"; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$ac_tmp/stdin" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ "$ac_tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$ac_tmp/stdin" case $ac_file in -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; esac \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" } >"$ac_tmp/config.h" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$ac_tmp/config.h" "$ac_file" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ || as_fn_error $? "could not create -" "$LINENO" 5 fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || { # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named 'Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir=$dirpart/$fdir; as_fn_mkdir_p # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ;; "libtool":C) # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi cfgfile="${ofile}T" trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008, 2009, 2010, 2011 Free Software # Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. # # GNU Libtool is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, or # obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # The names of the tagged configurations supported by this script. available_tags="CXX " # ### BEGIN LIBTOOL CONFIG # Which release of libtool.m4 was used? macro_version=$macro_version macro_revision=$macro_revision # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # What type of objects to build. pic_mode=$pic_mode # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # An echo program that protects backslashes. ECHO=$lt_ECHO # The PATH separator for the build system. PATH_SEPARATOR=$lt_PATH_SEPARATOR # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # A sed program that does not truncate output. SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="\$SED -e 1s/^X//" # A grep program that handles long lines. GREP=$lt_GREP # An ERE matcher. EGREP=$lt_EGREP # A literal string matcher. FGREP=$lt_FGREP # A BSD- or MS-compatible name lister. NM=$lt_NM # Whether we need soft or hard links. LN_S=$lt_LN_S # What is the maximum length of a command? max_cmd_len=$max_cmd_len # Object file suffix (normally "o"). objext=$ac_objext # Executable file suffix (normally ""). exeext=$exeext # whether the shell understands "unset". lt_unset=$lt_unset # turn spaces into newlines. SP2NL=$lt_lt_SP2NL # turn newlines into spaces. NL2SP=$lt_lt_NL2SP # convert \$build file names to \$host format. to_host_file_cmd=$lt_cv_to_host_file_cmd # convert \$build files to toolchain format. to_tool_file_cmd=$lt_cv_to_tool_file_cmd # An object symbol dumper. OBJDUMP=$lt_OBJDUMP # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method = "file_magic". file_magic_cmd=$lt_file_magic_cmd # How to find potential files when deplibs_check_method = "file_magic". file_magic_glob=$lt_file_magic_glob # Find potential files using nocaseglob when deplibs_check_method = "file_magic". want_nocaseglob=$lt_want_nocaseglob # DLL creation program. DLLTOOL=$lt_DLLTOOL # Command to associate shared and link libraries. sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd # The archiver. AR=$lt_AR # Flags to create an archive. AR_FLAGS=$lt_AR_FLAGS # How to feed a file listing to the archiver. archiver_list_spec=$lt_archiver_list_spec # A symbol stripping program. STRIP=$lt_STRIP # Commands used to install an old-style archive. RANLIB=$lt_RANLIB old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Whether to use a lock for old archive extraction. lock_old_archive_extraction=$lock_old_archive_extraction # A C compiler. LTCC=$lt_CC # LTCC compiler flags. LTCFLAGS=$lt_CFLAGS # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration. global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair. global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # Transform the output of nm in a C name address pair when lib prefix is needed. global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix # Specify filename containing input files for \$NM. nm_file_list_spec=$lt_nm_file_list_spec # The root where to search for dependent libraries,and in which our libraries should be installed. lt_sysroot=$lt_sysroot # The name of the directory that contains temporary libtool files. objdir=$objdir # Used to examine libraries when file_magic_cmd begins with "file". MAGIC_CMD=$MAGIC_CMD # Must we lock files when doing compilation? need_locks=$lt_need_locks # Manifest tool. MANIFEST_TOOL=$lt_MANIFEST_TOOL # Tool to manipulate archived DWARF debug symbol files on Mac OS X. DSYMUTIL=$lt_DSYMUTIL # Tool to change global to local symbols on Mac OS X. NMEDIT=$lt_NMEDIT # Tool to manipulate fat objects and archives on Mac OS X. LIPO=$lt_LIPO # ldd/readelf like tool for Mach-O binaries on Mac OS X. OTOOL=$lt_OTOOL # ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. OTOOL64=$lt_OTOOL64 # Old archive suffix (normally "a"). libext=$libext # Shared library suffix (normally ".so"). shrext_cmds=$lt_shrext_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Variables whose values should be saved in libtool wrapper scripts and # restored at link time. variables_saved_for_relink=$lt_variables_saved_for_relink # Do we need the "lib" prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Library versioning type. version_type=$version_type # Shared library runtime path variable. runpath_var=$runpath_var # Shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Permission mode override for installation of shared libraries. install_override_mode=$lt_install_override_mode # Command to use after installation of a shared archive. postinstall_cmds=$lt_postinstall_cmds # Command to use after uninstallation of a shared archive. postuninstall_cmds=$lt_postuninstall_cmds # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # As "finish_cmds", except a single script fragment to be evaled but # not shown. finish_eval=$lt_finish_eval # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Compile-time system search path for libraries. sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries. sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # The linker used to build libraries. LD=$lt_LD # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds # A language specific compiler. CC=$lt_compiler # Is the compiler the GNU compiler? with_gcc=$GCC # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc # Whether or not to disallow shared libs when runtime libs are static. allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec # Whether the compiler copes with passing no objects directly. compiler_needs_object=$lt_compiler_needs_object # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds # Commands used to build a shared archive. archive_cmds=$lt_archive_cmds archive_expsym_cmds=$lt_archive_expsym_cmds # Commands used to build a loadable module if different from building # a shared archive. module_cmds=$lt_module_cmds module_expsym_cmds=$lt_module_expsym_cmds # Whether we are building with GNU ld or not. with_gnu_ld=$lt_with_gnu_ld # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag # Flag that enforces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary and the resulting library dependency is # "absolute",i.e impossible to change by setting \${shlibpath_var} if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute # Set to "yes" if using the -LDIR flag during linking hardcodes DIR # into the resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR # into the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Set to "yes" if building a shared library automatically hardcodes DIR # into the library and all subsequent libraries and executables linked # against it. hardcode_automatic=$hardcode_automatic # Set to yes if linker adds runtime paths of dependent libraries # to runtime path list. inherit_rpath=$inherit_rpath # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms # Symbols that must always be exported. include_expsyms=$lt_include_expsyms # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds # Commands necessary for finishing linking programs. postlink_cmds=$lt_postlink_cmds # Specify filename containing input files. file_list_spec=$lt_file_list_spec # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # The directories searched by this compiler when creating a shared library. compiler_lib_search_dirs=$lt_compiler_lib_search_dirs # Dependencies to place before and after the objects being linked to # create a shared library. predep_objects=$lt_predep_objects postdep_objects=$lt_postdep_objects predeps=$lt_predeps postdeps=$lt_postdeps # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path # ### END LIBTOOL CONFIG _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac ltmain="$ac_aux_dir/ltmain.sh" # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) if test x"$xsi_shell" = xyes; then sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ func_dirname ()\ {\ \ case ${1} in\ \ */*) func_dirname_result="${1%/*}${2}" ;;\ \ * ) func_dirname_result="${3}" ;;\ \ esac\ } # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_basename ()$/,/^} # func_basename /c\ func_basename ()\ {\ \ func_basename_result="${1##*/}"\ } # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ func_dirname_and_basename ()\ {\ \ case ${1} in\ \ */*) func_dirname_result="${1%/*}${2}" ;;\ \ * ) func_dirname_result="${3}" ;;\ \ esac\ \ func_basename_result="${1##*/}"\ } # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ func_stripname ()\ {\ \ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ \ # positional parameters, so assign one to ordinary parameter first.\ \ func_stripname_result=${3}\ \ func_stripname_result=${func_stripname_result#"${1}"}\ \ func_stripname_result=${func_stripname_result%"${2}"}\ } # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ func_split_long_opt ()\ {\ \ func_split_long_opt_name=${1%%=*}\ \ func_split_long_opt_arg=${1#*=}\ } # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ func_split_short_opt ()\ {\ \ func_split_short_opt_arg=${1#??}\ \ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ } # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ func_lo2o ()\ {\ \ case ${1} in\ \ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ \ *) func_lo2o_result=${1} ;;\ \ esac\ } # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_xform ()$/,/^} # func_xform /c\ func_xform ()\ {\ func_xform_result=${1%.*}.lo\ } # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_arith ()$/,/^} # func_arith /c\ func_arith ()\ {\ func_arith_result=$(( $* ))\ } # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_len ()$/,/^} # func_len /c\ func_len ()\ {\ func_len_result=${#1}\ } # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$lt_shell_append" = xyes; then sed -e '/^func_append ()$/,/^} # func_append /c\ func_append ()\ {\ eval "${1}+=\\${2}"\ } # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ func_append_quoted ()\ {\ \ func_quote_for_eval "${2}"\ \ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ } # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: # Save a `func_append' function call where possible by direct use of '+=' sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: else # Save a `func_append' function call even when '+=' is not available sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$_lt_function_replace_fail" = x":"; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 $as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} fi mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" cat <<_LT_EOF >> "$ofile" # ### BEGIN LIBTOOL TAG CONFIG: CXX # The linker used to build libraries. LD=$lt_LD_CXX # How to create reloadable object files. reload_flag=$lt_reload_flag_CXX reload_cmds=$lt_reload_cmds_CXX # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds_CXX # A language specific compiler. CC=$lt_compiler_CXX # Is the compiler the GNU compiler? with_gcc=$GCC_CXX # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic_CXX # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl_CXX # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static_CXX # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc_CXX # Whether or not to disallow shared libs when runtime libs are static. allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX # Whether the compiler copes with passing no objects directly. compiler_needs_object=$lt_compiler_needs_object_CXX # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX # Commands used to build a shared archive. archive_cmds=$lt_archive_cmds_CXX archive_expsym_cmds=$lt_archive_expsym_cmds_CXX # Commands used to build a loadable module if different from building # a shared archive. module_cmds=$lt_module_cmds_CXX module_expsym_cmds=$lt_module_expsym_cmds_CXX # Whether we are building with GNU ld or not. with_gnu_ld=$lt_with_gnu_ld_CXX # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag_CXX # Flag that enforces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag_CXX # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct_CXX # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary and the resulting library dependency is # "absolute",i.e impossible to change by setting \${shlibpath_var} if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute_CXX # Set to "yes" if using the -LDIR flag during linking hardcodes DIR # into the resulting binary. hardcode_minus_L=$hardcode_minus_L_CXX # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR # into the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX # Set to "yes" if building a shared library automatically hardcodes DIR # into the library and all subsequent libraries and executables linked # against it. hardcode_automatic=$hardcode_automatic_CXX # Set to yes if linker adds runtime paths of dependent libraries # to runtime path list. inherit_rpath=$inherit_rpath_CXX # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs_CXX # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols_CXX # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds_CXX # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms_CXX # Symbols that must always be exported. include_expsyms=$lt_include_expsyms_CXX # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds_CXX # Commands necessary for finishing linking programs. postlink_cmds=$lt_postlink_cmds_CXX # Specify filename containing input files. file_list_spec=$lt_file_list_spec_CXX # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action_CXX # The directories searched by this compiler when creating a shared library. compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX # Dependencies to place before and after the objects being linked to # create a shared library. predep_objects=$lt_predep_objects_CXX postdep_objects=$lt_postdep_objects_CXX predeps=$lt_predeps_CXX postdeps=$lt_postdeps_CXX # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path_CXX # ### END LIBTOOL TAG CONFIG: CXX _LT_EOF ;; "po/stamp-it":C) if ! grep "^# INTLTOOL_MAKEFILE$" "po/Makefile.in" > /dev/null ; then as_fn_error $? "po/Makefile.in.in was not created by intltoolize." "$LINENO" 5 fi rm -f "po/stamp-it" "po/stamp-it.tmp" "po/POTFILES" "po/Makefile.tmp" >"po/stamp-it.tmp" sed '/^#/d s/^[[].*] *// /^[ ]*$/d '"s|^| $ac_top_srcdir/|" \ "$srcdir/po/POTFILES.in" | sed '$!s/$/ \\/' >"po/POTFILES" sed '/^POTFILES =/,/[^\\]$/ { /^POTFILES =/!d r po/POTFILES } ' "po/Makefile.in" >"po/Makefile" rm -f "po/Makefile.tmp" mv "po/stamp-it.tmp" "po/stamp-it" ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit 1 fi # # CONFIG_SUBDIRS section. # if test "$no_recursion" != yes; then # Remove --cache-file, --srcdir, and --disable-option-checking arguments # so they do not pile up. ac_sub_configure_args= ac_prev= eval "set x $ac_configure_args" shift for ac_arg do if test -n "$ac_prev"; then ac_prev= continue fi case $ac_arg in -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \ | --c=*) ;; --config-cache | -C) ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) ;; --disable-option-checking) ;; *) case $ac_arg in *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append ac_sub_configure_args " '$ac_arg'" ;; esac done # Always prepend --prefix to ensure using the same prefix # in subdir configurations. ac_arg="--prefix=$prefix" case $ac_arg in *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args" # Pass --silent if test "$silent" = yes; then ac_sub_configure_args="--silent $ac_sub_configure_args" fi # Always prepend --disable-option-checking to silence warnings, since # different subdirs can have different --enable and --with options. ac_sub_configure_args="--disable-option-checking $ac_sub_configure_args" ac_popdir=`pwd` for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue # Do not complain, so a configure script can configure whichever # parts of a large source tree are present. test -d "$srcdir/$ac_dir" || continue ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)" $as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5 $as_echo "$ac_msg" >&6 as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" # Check for guested configure; otherwise get Cygnus style configure. if test -f "$ac_srcdir/configure.gnu"; then ac_sub_configure=$ac_srcdir/configure.gnu elif test -f "$ac_srcdir/configure"; then ac_sub_configure=$ac_srcdir/configure elif test -f "$ac_srcdir/configure.in"; then # This should be Cygnus configure. ac_sub_configure=$ac_aux_dir/configure else { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: no configuration information is in $ac_dir" >&5 $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;} ac_sub_configure= fi # The recursion is here. if test -n "$ac_sub_configure"; then # Make the cache file name correct relative to the subdirectory. case $cache_file in [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;; *) # Relative name. ac_sub_cache_file=$ac_top_build_prefix$cache_file ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5 $as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;} # The eval makes quoting arguments work. eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \ --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" || as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5 fi cd "$ac_popdir" done fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi echo " Parlatype $VERSION ========================== with-libreoffice ...: $with_libreoffice " if test "${prefix}" != "/usr" -a "$with_libreoffice" == "yes"; then echo " Note: Consider using --without-libreoffice for prefixes other than /usr and copying the script manually to: /usr/lib/libreoffice/share/Scripts/python/Parlatype.py On some systems it's lib64 or lib32 instead of lib. " fi parlatype-1.5.4/Makefile.in0000644000175000017500000007074613204324006012520 00000000000000# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = . DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ $(top_srcdir)/configure $(am__configure_deps) \ $(srcdir)/config.h.in COPYING INSTALL NEWS compile \ config.guess config.rpath config.sub depcomp install-sh \ missing ltmain.sh ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ cscope distdir dist dist-all distcheck am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ $(LISP)config.h.in # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags CSCOPE = cscope DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best DIST_TARGETS = dist-gzip distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ APPDATA_VALIDATE = @APPDATA_VALIDATE@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DESKTOP_FILE_VALIDATE = @DESKTOP_FILE_VALIDATE@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ GTKDOC_CHECK = @GTKDOC_CHECK@ GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ GTKDOC_REBASE = @GTKDOC_REBASE@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ HELP_DIR = @HELP_DIR@ HTML_DIR = @HTML_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ ITSTOOL = @ITSTOOL@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ WARNINGCFLAGS = @WARNINGCFLAGS@ XGETTEXT = @XGETTEXT@ XMLLINT = @XMLLINT@ YELP_LC_DIST = @YELP_LC_DIST@ YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gsettingsschemadir = @gsettingsschemadir@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ intltool__v_merge_options_ = @intltool__v_merge_options_@ intltool__v_merge_options_0 = @intltool__v_merge_options_0@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = libparlatype data docs help libreoffice po src ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS} EXTRA_DIST = \ config.rpath \ COPYING_CCBYSA \ README.md CLEANFILES = \ libparlatype/docs/reference/*.bak DISTCLEANFILES = \ `find . -mindepth 1 -iname "*~"` # Distcheck flags for libparlatype: # without glade catalog, because glade catalog is installed into a detected dir # that we have no permissions for. DISTCHECK_CONFIGURE_FLAGS = \ --enable-introspection \ --enable-gtk-doc \ --disable-glade-catalog LP_EXPORT_DIR = tmp LP_EXPORT_FILE = launchpad-upload.tar.gz all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: Makefile @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @test -f $@ || rm -f stamp-h1 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-tarZ: distdir @echo WARNING: "Support for shar distribution archives is" \ "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir @echo WARNING: "Support for distribution archives compressed with" \ "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build \ && ../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ --srcdir=.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile config.h installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic \ maintainer-clean-local mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(am__recursive_targets) all install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ am--refresh check check-am clean clean-cscope clean-generic \ clean-libtool cscope cscopelist-am ctags ctags-am dist \ dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \ dist-xz dist-zip distcheck distclean distclean-generic \ distclean-hdr distclean-libtool distclean-tags distcleancheck \ distdir distuninstallcheck dvi dvi-am html html-am info \ info-am install install-am install-data install-data-am \ install-dvi install-dvi-am install-exec install-exec-am \ install-html install-html-am install-info install-info-am \ install-man install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic maintainer-clean-local mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-am uninstall uninstall-am # A few maintainer make targets .PHONY: dist-sign compat-check help help-online pot todo lp-export lp-create-tar # make compat-check -- list all GTK/Glib/GStreamer version checks compat-check: @find . \( -name "*.c" -o -name "*.h" \) -exec grep -Hno "\(GLIB\|GTK\|GST\)_CHECK_VERSION.*" {} \; # make dist-sign -- sign tarball dist-sign: gpg --armor --detach-sign "parlatype-$(VERSION).tar.gz" # make help-online -- create html version of help help-online: mkdir -p help-online yelp-build html -o help-online/ help/C/ # make lp-export -- create archive to export translations to launchpad lp-export: $(LP_EXPORT_FILE) $(LP_EXPORT_FILE): pot lp-create-tar lp-create-tar: mkdir $(LP_EXPORT_DIR) mkdir $(LP_EXPORT_DIR)/libparlatype mkdir $(LP_EXPORT_DIR)/parlatype mkdir $(LP_EXPORT_DIR)/help cp libparlatype/po/*.pot $(LP_EXPORT_DIR)/libparlatype cp libparlatype/po/*.po $(LP_EXPORT_DIR)/libparlatype cp po/*.pot $(LP_EXPORT_DIR)/parlatype cp po/*.po $(LP_EXPORT_DIR)/parlatype cp help/*.pot $(LP_EXPORT_DIR)/help/help.pot find help/ -iname "*.po" -exec cp {} $(LP_EXPORT_DIR)/help \; tar -C $(LP_EXPORT_DIR) -czf $(LP_EXPORT_FILE) libparlatype parlatype help rm -r $(LP_EXPORT_DIR)/ # make pot -- create all translation templates at once pot: $(MAKE) -C po parlatype.pot $(MAKE) -C help pot $(MAKE) -C libparlatype/po libparlatype.pot # make todo -- list all FIXME and TODO items todo: @find . \( -name "*.c" -o -name "*.h" \) -exec grep -Hno "FIXME .*" {} \; | sed "s/\*\///" @find . \( -name "*.c" -o -name "*.h" \) -exec grep -Hno "TODO .*" {} \; | sed "s/\*\///" # make help -- show this list help: @grep -e "^# make .*" Makefile | cut -c3- maintainer-clean-local: rm -rf $(LP_EXPORT_DIR) rm -f $(LP_EXPORT_FILE) # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: parlatype-1.5.4/configure.ac0000644000175000017500000000432613204247670012743 00000000000000# -*- Autoconf -*- # Process this file with autoconf to produce a configure script. AC_PREREQ([2.69]) AC_INIT([parlatype], [1.5.4], [https://github.com/gkarsay/parlatype/issues], [parlatype], [https://gkarsay.github.io/parlatype/]) AM_INIT_AUTOMAKE([-Wall -Werror foreign -Wno-portability]) AC_CONFIG_SRCDIR([src/main.c]) AC_CONFIG_HEADERS([config.h]) AC_CONFIG_MACRO_DIR([m4]) AC_SUBST([GETTEXT_PACKAGE], AC_PACKAGE_NAME) IT_PROG_INTLTOOL(0.50.2) AM_SILENT_RULES([yes]) LT_INIT([disable-static]) # Checks for programs. AC_PROG_CC AC_PROG_CXX # Checks for libraries. # Checks for header files. AC_CHECK_HEADERS([stdlib.h]) # Checks for typedefs, structures, and compiler characteristics. # Checks for library functions. AC_CHECK_FUNCS([atexit setlocale]) GLIB_GSETTINGS AC_PATH_PROG(GLIB_COMPILE_RESOURCES, glib-compile-resources) AC_PATH_PROG([DESKTOP_FILE_VALIDATE], [desktop-file-validate], [/bin/true]) AC_PATH_PROG([APPDATA_VALIDATE], [appstream-util], [/bin/true]) YELP_HELP_INIT GTK_MIN_VERSION=3.10.0 PKG_CHECK_MODULES([GTK], [gtk+-3.0 >= $GTK_MIN_VERSION, gmodule-2.0]) WARNINGCFLAGS="-Wall" AC_SUBST([WARNINGCFLAGS]) AC_ARG_WITH([libreoffice], [AS_HELP_STRING([--without-libreoffice], [don't install LibreOffice macros])], [], [with_libreoffice=yes]) AM_CONDITIONAL([LIBREOFFICE], [test "$with_libreoffice" = "yes"]) # needed? GTK_DOC_CHECK([1.14],[--flavour no-tmpl]) AC_CONFIG_FILES([Makefile data/Makefile data/icons/Makefile docs/Makefile help/Makefile libreoffice/Makefile po/Makefile.in src/Makefile]) AC_CONFIG_SUBDIRS([libparlatype]) AC_OUTPUT dnl ========================================================================== echo " Parlatype $VERSION ========================== with-libreoffice ...: $with_libreoffice " if test "${prefix}" != "/usr" -a "$with_libreoffice" == "yes"; then echo " Note: Consider using --without-libreoffice for prefixes other than /usr and copying the script manually to: /usr/lib/libreoffice/share/Scripts/python/Parlatype.py On some systems it's lib64 or lib32 instead of lib. " fi parlatype-1.5.4/depcomp0000755000175000017500000005601613167645115012041 00000000000000#! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2013-05-30.07; # UTC # Copyright (C) 1999-2013 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by 'PROGRAMS ARGS'. object Object file output by 'PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputting dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac # Get the directory component of the given path, and save it in the # global variables '$dir'. Note that this directory component will # be either empty or ending with a '/' character. This is deliberate. set_dir_from () { case $1 in */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; *) dir=;; esac } # Get the suffix-stripped basename of the given path, and save it the # global variable '$base'. set_base_from () { base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` } # If no dependency file was actually created by the compiler invocation, # we still have to create a dummy depfile, to avoid errors with the # Makefile "include basename.Plo" scheme. make_dummy_depfile () { echo "#dummy" > "$depfile" } # Factor out some common post-processing of the generated depfile. # Requires the auxiliary global variable '$tmpdepfile' to be set. aix_post_process_depfile () { # If the compiler actually managed to produce a dependency file, # post-process it. if test -f "$tmpdepfile"; then # Each line is of the form 'foo.o: dependency.h'. # Do two passes, one to just change these to # $object: dependency.h # and one to simply output # dependency.h: # which is needed to avoid the deleted-header problem. { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" } > "$depfile" rm -f "$tmpdepfile" else make_dummy_depfile fi } # A tabulation character. tab=' ' # A newline character. nl=' ' # Character ranges might be problematic outside the C locale. # These definitions help. upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ lower=abcdefghijklmnopqrstuvwxyz digits=0123456789 alpha=${upper}${lower} if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Avoid interferences from the environment. gccflag= dashmflag= # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi cygpath_u="cygpath -u -f -" if test "$depmode" = msvcmsys; then # This is just like msvisualcpp but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvisualcpp fi if test "$depmode" = msvc7msys; then # This is just like msvc7 but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvc7 fi if test "$depmode" = xlc; then # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. gccflag=-qmakedep=gcc,-MF depmode=gcc fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. ## Unfortunately, FreeBSD c89 acceptance of flags depends upon ## the command line argument order; so add the flags where they ## appear in depend2.am. Note that the slowdown incurred here ## affects only configure: in makefiles, %FASTDEP% shortcuts this. for arg do case $arg in -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; *) set fnord "$@" "$arg" ;; esac shift # fnord shift # $arg done "$@" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. ## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. ## (see the conditional assignment to $gccflag above). ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). Also, it might not be ## supported by the other compilers which use the 'gcc' depmode. ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The second -e expression handles DOS-style file names with drive # letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the "deleted header file" problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. ## Some versions of gcc put a space before the ':'. On the theory ## that the space means something, we add a space to the output as ## well. hp depmode also adds that space, but also prefixes the VPATH ## to the object. Take care to not repeat it in the output. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like '#:fec' to the end of the # dependency line. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ | tr "$nl" ' ' >> "$depfile" echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" ;; xlc) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts '$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else tmpdepfile1=$dir$base.u tmpdepfile2=$dir$base.u tmpdepfile3=$dir$base.u "$@" -M fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done aix_post_process_depfile ;; tcc) # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 # FIXME: That version still under development at the moment of writing. # Make that this statement remains true also for stable, released # versions. # It will wrap lines (doesn't matter whether long or short) with a # trailing '\', as in: # # foo.o : \ # foo.c \ # foo.h \ # # It will put a trailing '\' even on the last line, and will use leading # spaces rather than leading tabs (at least since its commit 0394caf7 # "Emit spaces for -MD"). "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. # We have to change lines of the first kind to '$object: \'. sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" # And for each line of the second kind, we have to emit a 'dep.h:' # dummy dependency, to avoid the deleted-header problem. sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" rm -f "$tmpdepfile" ;; ## The order of this option in the case statement is important, since the ## shell code in configure will try each of these formats in the order ## listed in this file. A plain '-MD' option would be understood by many ## compilers, so we must ensure this comes after the gcc and icc options. pgcc) # Portland's C compiler understands '-MD'. # Will always output deps to 'file.d' where file is the root name of the # source file under compilation, even if file resides in a subdirectory. # The object file name does not affect the name of the '.d' file. # pgcc 10.2 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using '\' : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... set_dir_from "$object" # Use the source, not the object, to determine the base name, since # that's sadly what pgcc will do too. set_base_from "$source" tmpdepfile=$base.d # For projects that build the same source file twice into different object # files, the pgcc approach of using the *source* file root name can cause # problems in parallel builds. Use a locking strategy to avoid stomping on # the same $tmpdepfile. lockdir=$base.d-lock trap " echo '$0: caught signal, cleaning up...' >&2 rmdir '$lockdir' exit 1 " 1 2 13 15 numtries=100 i=$numtries while test $i -gt 0; do # mkdir is a portable test-and-set. if mkdir "$lockdir" 2>/dev/null; then # This process acquired the lock. "$@" -MD stat=$? # Release the lock. rmdir "$lockdir" break else # If the lock is being held by a different process, wait # until the winning process is done or we timeout. while test -d "$lockdir" && test $i -gt 0; do sleep 1 i=`expr $i - 1` done fi i=`expr $i - 1` done trap - 1 2 13 15 if test $i -le 0; then echo "$0: failed to acquire lock after $numtries attempts" >&2 echo "$0: check lockdir '$lockdir'" >&2 exit 1 fi if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp2) # The "hp" stanza above does not work with aCC (C++) and HP's ia64 # compilers, which have integrated preprocessors. The correct option # to use with these is +Maked; it writes dependencies to a file named # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d "$@" -Wc,+Maked else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d "$@" +Maked fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" # Add 'dependent.h:' lines. sed -ne '2,${ s/^ *// s/ \\*$// s/$/:/ p }' "$tmpdepfile" >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in 'foo.d' instead, so we check for that too. # Subdirectories are respected. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then # Libtool generates 2 separate objects for the 2 libraries. These # two compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir$base.o.d # libtool 1.5 tmpdepfile2=$dir.libs/$base.o.d # Likewise. tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d "$@" -MD fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done # Same post-processing that is required for AIX mode. aix_post_process_depfile ;; msvc7) if test "$libtool" = yes; then showIncludes=-Wc,-showIncludes else showIncludes=-showIncludes fi "$@" $showIncludes > "$tmpdepfile" stat=$? grep -v '^Note: including file: ' "$tmpdepfile" if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The first sed program below extracts the file names and escapes # backslashes for cygpath. The second sed program outputs the file # name when reading, but also accumulates all include files in the # hold buffer in order to output them again at the end. This only # works with sed implementations that can handle large buffers. sed < "$tmpdepfile" -n ' /^Note: including file: *\(.*\)/ { s//\1/ s/\\/\\\\/g p }' | $cygpath_u | sort -u | sed -n ' s/ /\\ /g s/\(.*\)/'"$tab"'\1 \\/p s/.\(.*\) \\/\1:/ H $ { s/.*/'"$tab"'/ G p }' >> "$depfile" echo >> "$depfile" # make sure the fragment doesn't end with a backslash rm -f "$tmpdepfile" ;; msvc7msys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for ':' # in the target name. This is to cope with DOS-style filenames: # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. "$@" $dashmflag | sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this sed invocation # correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift cleared=no eat=no for arg do case $cleared in no) set ""; shift cleared=yes ;; esac if test $eat = yes; then eat=no continue fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -arch) eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" # makedepend may prepend the VPATH from the source file name to the object. # No need to regex-escape $object, excess matching of '.' is harmless. sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process the last invocation # correctly. Breaking it into two sed invocations is a workaround. sed '1,2d' "$tmpdepfile" \ | tr ' ' "$nl" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E \ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi IFS=" " for arg do case "$arg" in -o) shift ;; $object) shift ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E 2>/dev/null | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" echo "$tab" >> "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; msvcmsys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: parlatype-1.5.4/install-sh0000755000175000017500000003413713167645114012467 00000000000000#!/bin/sh # install - install a program, script, or datafile scriptversion=2011-11-20.07; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # 'make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. nl=' ' IFS=" "" $nl" # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} if test -z "$doit"; then doit_exec=exec else doit_exec=$doit fi # Put in absolute file names if you don't have them in your path; # or use environment vars. chgrpprog=${CHGRPPROG-chgrp} chmodprog=${CHMODPROG-chmod} chownprog=${CHOWNPROG-chown} cmpprog=${CMPPROG-cmp} cpprog=${CPPROG-cp} mkdirprog=${MKDIRPROG-mkdir} mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} posix_glob='?' initialize_posix_glob=' test "$posix_glob" != "?" || { if (set -f) 2>/dev/null; then posix_glob= else posix_glob=: fi } ' posix_mkdir= # Desired mode of installed file. mode=0755 chgrpcmd= chmodcmd=$chmodprog chowncmd= mvcmd=$mvprog rmcmd="$rmprog -f" stripcmd= src= dst= dir_arg= dst_arg= copy_on_change=false no_target_directory= usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: --help display this help and exit. --version display version info and exit. -c (ignored) -C install only if different (preserve the last data modification time) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -s $stripprog installed files. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test $# -ne 0; do case $1 in -c) ;; -C) copy_on_change=true;; -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 case $mode in *' '* | *' '* | *' '* | *'*'* | *'?'* | *'['*) echo "$0: invalid mode: $mode" >&2 exit 1;; esac shift;; -o) chowncmd="$chownprog $2" shift;; -s) stripcmd=$stripprog;; -t) dst_arg=$2 # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac shift;; -T) no_target_directory=true;; --version) echo "$0 $scriptversion"; exit $?;; --) shift break;; -*) echo "$0: invalid option: $1" >&2 exit 1;; *) break;; esac shift done if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dst_arg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dst_arg" shift # fnord fi shift # arg dst_arg=$arg # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac done fi if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call 'install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then do_exit='(exit $ret); exit $ret' trap "ret=129; $do_exit" 1 trap "ret=130; $do_exit" 2 trap "ret=141; $do_exit" 13 trap "ret=143; $do_exit" 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. case $mode in # Optimize common cases. *644) cp_umask=133;; *755) cp_umask=22;; *[0-7]) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac fi for src do # Protect names problematic for 'test' and other utilities. case $src in -* | [=\(\)!]) src=./$src;; esac if test -n "$dir_arg"; then dst=$src dstdir=$dst test -d "$dstdir" dstdir_status=$? else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dst_arg # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else # Prefer dirname, but fall back on a substitute if dirname fails. dstdir=` (dirname "$dst") 2>/dev/null || expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$dst" : 'X\(//\)[^/]' \| \ X"$dst" : 'X\(//\)$' \| \ X"$dst" : 'X\(/\)' \| . 2>/dev/null || echo X"$dst" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q' ` test -d "$dstdir" dstdir_status=$? fi fi obsolete_mkdir_used=false if test $dstdir_status != 0; then case $posix_mkdir in '') # Create intermediate dirs using mode 755 as modified by the umask. # This is like FreeBSD 'install' as of 1997-10-28. umask=`umask` case $stripcmd.$umask in # Optimize common cases. *[2367][2367]) mkdir_umask=$umask;; .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; *[0-7]) mkdir_umask=`expr $umask + 22 \ - $umask % 100 % 40 + $umask % 20 \ - $umask % 10 % 4 + $umask % 2 `;; *) mkdir_umask=$umask,go-w;; esac # With -d, create the new directory with the user-specified mode. # Otherwise, rely on $mkdir_umask. if test -n "$dir_arg"; then mkdir_mode=-m$mode else mkdir_mode= fi posix_mkdir=false case $umask in *[123567][0-7][0-7]) # POSIX mkdir -p sets u+wx bits regardless of umask, which # is incompatible with FreeBSD 'install' when (umask & 300) != 0. ;; *) # $RANDOM is not portable (e.g. dash); use it when possible to # lower collision chance tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0 # As "mkdir -p" follows symlinks and we work in /tmp possibly; so # create the $tmpdir first (and fail if unsuccessful) to make sure # that nobody tries to guess the $tmpdir name. if (umask $mkdir_umask && $mkdirprog $mkdir_mode "$tmpdir" && exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. test_tmpdir="$tmpdir/a" ls_ld_tmpdir=`ls -ld "$test_tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null fi trap '' 0;; esac;; esac if $posix_mkdir && ( umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else # The umask is ridiculous, or mkdir does not conform to POSIX, # or it failed possibly due to a race condition. Create the # directory the slow way, step by step, checking for races as we go. case $dstdir in /*) prefix='/';; [-=\(\)!]*) prefix='./';; *) prefix='';; esac eval "$initialize_posix_glob" oIFS=$IFS IFS=/ $posix_glob set -f set fnord $dstdir shift $posix_glob set +f IFS=$oIFS prefixes= for d do test X"$d" = X && continue prefix=$prefix$d if test -d "$prefix"; then prefixes= else if $posix_mkdir; then (umask=$mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break # Don't fail if two instances are running concurrently. test -d "$prefix" || exit 1 else case $prefix in *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; *) qprefix=$prefix;; esac prefixes="$prefixes '$qprefix'" fi fi prefix=$prefix/ done if test -n "$prefixes"; then # Don't fail if two instances are running concurrently. (umask $mkdir_umask && eval "\$doit_exec \$mkdirprog $prefixes") || test -d "$dstdir" || exit 1 obsolete_mkdir_used=true fi fi fi if test -n "$dir_arg"; then { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && eval "$initialize_posix_glob" && $posix_glob set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && $posix_glob set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then rm -f "$dsttmp" else # Rename the file to the real destination. $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. { # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { test ! -f "$dst" || $doit $rmcmd -f "$dst" 2>/dev/null || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } } || { echo "$0: cannot unlink or rename $dst" >&2 (exit 1); exit 1 } } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 trap '' 0 fi done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: parlatype-1.5.4/src/0000755000175000017500000000000013204324054011307 500000000000000parlatype-1.5.4/src/resources/0000755000175000017500000000000013204324054013321 500000000000000parlatype-1.5.4/src/resources/parlatype.css0000644000175000017500000000045313176574165016000 00000000000000/* custom styles for PtWindow */ /* make goto button smaller */ #goto_cursor_button { padding: 2px; } #time_label { /* Tried Cantarell first, but digits are not always monospace: They are on Debian 8, but not on Ubuntu 16.4 */ font-family: monospace; font-size: 150%; font-weight: 600; } parlatype-1.5.4/src/resources/goto-dialog.ui0000644000175000017500000001213713176574165016033 00000000000000 100000000000000 1 10 parlatype-1.5.4/src/resources/icons/0000755000175000017500000000000013204324054014434 500000000000000parlatype-1.5.4/src/resources/icons/cursor.png0000644000175000017500000000114213176574165016417 00000000000000PNG  IHDRabKGD pHYs B(xIDAT8ՓMkQ;Ipᶦ5 -X1M+ wEMH֭J-FBt!"$4Jm5\hń6;3Hw}xy8DJq`̌]@^`lێw9E!=քmR*Xֈ ^ tb:{=&[4H!&/] UѓcUl^i2kRrgMLnۯ/QApPv!~>2c9q{X/YMSSuq<=U\\RH J):Ρ3!T30 !D 99wʤJBU5PCg>'De%LۻGÒ,p!TUfPUnqƙwǏ|Kn'Rfk'\_Ͻµ7J3H3UMlwΗfsyG9ųƑ0p#(X\#qV4]]NfA_/^=IENDB`parlatype-1.5.4/src/resources/window.ui0000644000175000017500000004106213176574165015134 00000000000000 -3 3 0.10000000000000001 10 0.5 1.5 1 0.10000000000000001 0.10000000000000001 1000 1 10 1 1 0.10000000000000001 0.10000000000000001 parlatype-1.5.4/src/resources/preferences.ui0000644000175000017500000005114613200375206016111 00000000000000 1 60 10 1 10 1 60 10 1 10 10 2 1 1 1 8 4 1 1 parlatype-1.5.4/src/resources/parlatype.gresource.xml0000644000175000017500000000117013176574165020002 00000000000000 icons/cursor.png window.ui menus.ui goto-dialog.ui preferences.ui window-headerbar.ui parlatype.css help-overlay.ui parlatype-1.5.4/src/resources/menus.ui0000644000175000017500000001521213176574165014752 00000000000000
Open File app.open Recent Files app.recent
Preferences app.prefs
_Keyboard Shortcuts win.show-help-overlay Help app.help Info app.about Quit app.quit
Open File app.open Recent Files app.recent
Preferences app.prefs
Help app.help Info app.about Quit app.quit
Copy timestamp win.copy Insert timestamp win.insert Go to ... win.goto _File
file-section Open File app.open Recent Files app.recent Quit app.quit
_Edit
edit-section Copy timestamp win.copy Insert timestamp win.insert Go to ... win.goto Preferences app.prefs
_Help
help-section _Keyboard Shortcuts win.show-help-overlay Help app.help Info app.about
_File
file-section Open File app.open Recent Files app.recent Quit app.quit
_Edit
edit-section Copy timestamp win.copy Insert timestamp win.insert Go to ... win.goto Preferences app.prefs
_Help
help-section Help app.help Info app.about
parlatype-1.5.4/src/resources/help-overlay.ui0000644000175000017500000001120313176574165016226 00000000000000 1 1 shortcuts 12 1 General 1 <ctrl>O Open a media file 1 <ctrl>R Open recently used media files 1 F10 Show/hide action menu 1 <ctrl>Q Quit 1 Waveform 1 <ctrl>plus Zoom in 1 <ctrl>minus Zoom out 1 <ctrl>G Open “Go to” dialog 1 <ctrl>C Copy timestamp to clipboard 1 <ctrl>V Go to timestamp in clipboard 1 Help 1 F1 Show help 1 <ctrl>F1 <ctrl>question Show keyboard shortcuts parlatype-1.5.4/src/resources/window-headerbar.ui0000644000175000017500000000437313176574165017053 00000000000000 True Parlatype True gtk-open Open a file True True True True True True app.open start gtk-media-play False True True True True True True start True True none end parlatype-1.5.4/src/pt-mediakeys.h0000644000175000017500000000573513171727132014015 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ /* Grabbing media keys from Gnome Settings Daemon. * The following is a citation from: * https://git.gnome.org/browse/gnome-settings-daemon/tree/plugins/media-keys/README.media-keys-API?h=gnome-3-14 This is very simple documentation to gnome-settings-daemon's D-Bus API for media players. gnome-settings-daemon will send key press events from multimedia keys to applications that register their interest in those events. This allows the play/pause button to control an audio player that's not focused for example. The D-Bus API is described in gsd-media-keys-manager.c (look for introspection_xml), but a small explanation follows here. 1. Create yourself a proxy object for the remote interface: Object path: /org/gnome/SettingsDaemon/MediaKeys D-Bus name: org.gnome.SettingsDaemon.MediaKeys Interface name: org.gnome.SettingsDaemon.MediaKeys 2. Register your application with gnome-settings-daemon GrabMediaPlayerKeys ("my-application", 0) with the second argument being the current time (usually 0, or the time passed to you from an event, such as a mouse click) 3. Listen to the MediaPlayerKeyPressed() signal 4. When receiving a MediaPlayerKeyPressed() signal, check whether the first argument (application) matches the value you passed to GrabMediaPlayerKeys() and apply the action depending on the key (2nd argument) Possible values of key are: - Play - Pause - Stop - Previous - Next - Rewind - FastForward - Repeat - Shuffle 5. Every time your application is focused, you should call GrabMediaPlayerKeys() again, so that gnome-settings-daemon knows which one was last used. This allows switching between a movie player and a music player, for example, and have the buttons control the last used application. 6. When your application wants to stop using the functionality it can call ReleaseMediaPlayerKeys(). If your application does not call ReleaseMediaPlayerKeys() and releases its D-Bus connection then the application will be automatically removed from the list of applications held by gnome-settings-daemon. */ #ifndef PT_MEDIAKEYS_H #define PT_MEDIAKEYS_H #include "config.h" #include #include "pt-window.h" void setup_mediakeys (PtWindow *win); #endif parlatype-1.5.4/src/pt-window-dnd.h0000644000175000017500000000216613171727132014107 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #ifndef PT_WINDOW_DND_H #define PT_WINDOW_DND_H #include "config.h" #include #include "pt-window.h" enum { TARGET_STRING, /* most GNOME apps */ TARGET_UTF8_STRING /* from LibreOffice */ }; static const GtkTargetEntry drag_target_string[] = { { "STRING", GTK_TARGET_OTHER_APP, TARGET_STRING } , { "UTF8_STRING", GTK_TARGET_OTHER_APP, TARGET_UTF8_STRING } }; void pt_window_setup_dnd (PtWindow *win); #endif parlatype-1.5.4/src/Makefile.in0000644000175000017500000005523413204324006013302 00000000000000# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = parlatype$(EXEEXT) subdir = src DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ $(top_srcdir)/depcomp ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" PROGRAMS = $(bin_PROGRAMS) am__objects_1 = pt-resources.$(OBJEXT) am_parlatype_OBJECTS = $(am__objects_1) main.$(OBJEXT) \ pt-app.$(OBJEXT) pt-dbus-service.$(OBJEXT) \ pt-goto-dialog.$(OBJEXT) pt-mediakeys.$(OBJEXT) \ pt-preferences.$(OBJEXT) pt-window.$(OBJEXT) \ pt-window-dnd.$(OBJEXT) parlatype_OBJECTS = $(am_parlatype_OBJECTS) am__DEPENDENCIES_1 = parlatype_DEPENDENCIES = \ $(top_builddir)/libparlatype/src/libparlatype.la \ $(am__DEPENDENCIES_1) AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) am__v_lt_0 = --silent am__v_lt_1 = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) AM_V_CC = $(am__v_CC_@AM_V@) am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) am__v_CC_0 = @echo " CC " $@; am__v_CC_1 = CCLD = $(CC) LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CCLD = $(am__v_CCLD_@AM_V@) am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) am__v_CCLD_0 = @echo " CCLD " $@; am__v_CCLD_1 = SOURCES = $(parlatype_SOURCES) DIST_SOURCES = $(parlatype_SOURCES) am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ APPDATA_VALIDATE = @APPDATA_VALIDATE@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DESKTOP_FILE_VALIDATE = @DESKTOP_FILE_VALIDATE@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ GTKDOC_CHECK = @GTKDOC_CHECK@ GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ GTKDOC_REBASE = @GTKDOC_REBASE@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ HELP_DIR = @HELP_DIR@ HTML_DIR = @HTML_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ ITSTOOL = @ITSTOOL@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ WARNINGCFLAGS = @WARNINGCFLAGS@ XGETTEXT = @XGETTEXT@ XMLLINT = @XMLLINT@ YELP_LC_DIST = @YELP_LC_DIST@ YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gsettingsschemadir = @gsettingsschemadir@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ intltool__v_merge_options_ = @intltool__v_merge_options_@ intltool__v_merge_options_0 = @intltool__v_merge_options_0@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ resource_xml = $(srcdir)/resources/parlatype.gresource.xml resource_files = $(shell glib-compile-resources --sourcedir=$(srcdir)/resources --generate-dependencies $(resource_xml)) BUILT_SOURCES = \ pt-resources.c \ pt-resources.h \ $(NULL) parlatype_SOURCES = \ $(BUILT_SOURCES) \ main.c \ pt-app.c \ pt-app.h \ pt-dbus-service.c \ pt-dbus-service.h \ pt-goto-dialog.c \ pt-goto-dialog.h \ pt-mediakeys.c \ pt-mediakeys.h \ pt-preferences.c \ pt-preferences.h \ pt-window.c \ pt-window.h \ pt-window-dnd.c \ pt-window-dnd.h \ pt-window-private.h parlatype_LDADD = \ $(top_builddir)/libparlatype/src/libparlatype.la \ $(GTK_LIBS) AM_CPPFLAGS = \ -I$(top_srcdir)/ \ -I$(top_builddir)/ \ -I$(top_srcdir)/libparlatype \ -I$(top_builddir)/libparlatype \ -I$(top_srcdir)/libparlatype/src \ -I$(top_builddir)/libparlatype/src \ $(WARNINGCFLAGS) \ $(GTK_CFLAGS) \ -DLOCALEDIR=\"$(localedir)\" EXTRA_DIST = \ $(resource_files) \ $(resource_xml) CLEANFILES = $(BUILT_SOURCES) all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign src/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ fi; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p \ || test -f $$p1 \ ; then echo "$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n;h' \ -e 's|.*|.|' \ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) files[d] = files[d] " " $$1; \ else { print "f", $$3 "/" $$4, $$1; } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ } \ ; done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ -e 's/$$/$(EXEEXT)/' \ `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(bindir)" && rm -f $$files clean-binPROGRAMS: @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list parlatype$(EXEEXT): $(parlatype_OBJECTS) $(parlatype_DEPENDENCIES) $(EXTRA_parlatype_DEPENDENCIES) @rm -f parlatype$(EXEEXT) $(AM_V_CCLD)$(LINK) $(parlatype_OBJECTS) $(parlatype_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pt-app.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pt-dbus-service.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pt-goto-dialog.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pt-mediakeys.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pt-preferences.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pt-resources.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pt-window-dnd.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pt-window.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< .c.obj: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-am TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-am CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-am cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-am all-am: Makefile $(PROGRAMS) installdirs: for dir in "$(DESTDIR)$(bindir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) clean: clean-am clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-binPROGRAMS install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-binPROGRAMS .MAKE: all check install install-am install-strip .PHONY: CTAGS GTAGS TAGS all all-am check check-am clean \ clean-binPROGRAMS clean-generic clean-libtool cscopelist-am \ ctags ctags-am distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-binPROGRAMS \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-am uninstall uninstall-am uninstall-binPROGRAMS pt-resources.c: $(resource_xml) $(resource_files) $(AM_V_GEN)glib-compile-resources \ --target=$@ \ --sourcedir=$(srcdir)/resources \ --generate-source \ --c-name parlatype $(resource_xml) pt-resources.h: $(resource_xml) $(resource_files) $(AM_V_GEN)glib-compile-resources \ --target=$@ \ --sourcedir=$(srcdir)/resources \ --generate-header \ --c-name parlatype $(resource_xml) # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: parlatype-1.5.4/src/pt-window-private.h0000644000175000017500000000315413176574165015025 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #ifndef PT_WINDOW_PRIVATE_H #define PT_WINDOW_PRIVATE_H #include "config.h" #include #include #include struct _PtWindowPrivate { GSettings *editor; GDBusProxy *proxy; gint dbus_watch_id; GtkRecentManager *recent; PtPlayer *player; GtkWidget *progress_dlg; gint progress_handler_id; GtkWidget *button_open; GtkWidget *button_play; GtkWidget *button_fast_back; // not used GtkWidget *button_fast_forward; // not used GtkWidget *button_jump_back; GtkWidget *button_jump_forward; GtkWidget *volumebutton; GtkWidget *pos_label; GtkWidget *label_box; GtkWidget *goto_button; GtkWidget *speed_scale; GtkWidget *waveviewer; PtWavedata *wavedata; gint timer; gdouble speed; gint pause; gint back; gint forward; gboolean playing_selection; guint owner_id; }; #endif parlatype-1.5.4/src/pt-mediakeys.c0000644000175000017500000001230213204124046013764 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #include "config.h" #include #include "pt-window.h" #include "pt-window-private.h" static void on_media_key_pressed (GDBusProxy *proxy, gchar *sender_name, gchar *signal_name, GVariant *parameters, PtWindow *win) { GVariant *app_parameter; GVariant *key_parameter; const gchar *app; const gchar *key; gboolean state; if (g_strcmp0 (signal_name, "MediaPlayerKeyPressed") != 0) return; app_parameter = g_variant_get_child_value (parameters, 0); app = g_variant_get_string (app_parameter, NULL); if (g_strcmp0 (app, "Parlatype") != 0) return; key_parameter = g_variant_get_child_value (parameters, 1); key = g_variant_get_string (key_parameter, NULL); if (g_strcmp0 (key, "Play") == 0 || g_strcmp0 (key, "Pause") == 0 || g_strcmp0 (key, "Stop") == 0) { state = gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (win->priv->button_play)); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (win->priv->button_play), !state); return; } if (g_strcmp0 (key, "Previous") == 0 || g_strcmp0 (key, "Rewind") == 0) { gtk_button_clicked (GTK_BUTTON (win->priv->button_jump_back)); return; } if (g_strcmp0 (key, "Next") == 0 || g_strcmp0 (key, "FastForward") == 0) { gtk_button_clicked (GTK_BUTTON (win->priv->button_jump_forward)); } } static void proxy_call_cb (GObject *source_object, GAsyncResult *res, gpointer user_data) { GVariant *variant; GError *error = NULL; variant = g_dbus_proxy_call_finish (G_DBUS_PROXY (source_object), res, &error); if (error) { g_warning ("Failed to call media keys proxy: %s", error->message); g_error_free (error); } else { g_variant_unref (variant); } } static void grab_mediakeys (PtWindow *win) { if (!win->priv->proxy) return; g_dbus_proxy_call ( win->priv->proxy, "GrabMediaPlayerKeys", g_variant_new ("(su)", "Parlatype", 0), G_DBUS_CALL_FLAGS_NONE, -1, NULL, proxy_call_cb, NULL); // user_data } static gboolean window_focus_in_event_cb (GtkWidget *widget, GdkEventFocus *event, PtWindow *win) { grab_mediakeys (win); return FALSE; } static void remove_bus_watch (PtWindow *win) { if (win->priv->dbus_watch_id != 0) { g_bus_unwatch_name (win->priv->dbus_watch_id); win->priv->dbus_watch_id = 0; } } static void name_appeared_cb (GDBusConnection *connection, const gchar *name, const gchar *name_owner, PtWindow *win) { g_debug ("Found %s", name); GError *error = NULL; win->priv->proxy = g_dbus_proxy_new_for_bus_sync ( G_BUS_TYPE_SESSION, G_DBUS_PROXY_FLAGS_NONE, NULL, name, "/org/gnome/SettingsDaemon/MediaKeys", "org.gnome.SettingsDaemon.MediaKeys", NULL, &error); if (error) { g_warning ("Couldn't create proxy for %s: %s", name, error->message); g_error_free (error); return; } grab_mediakeys (win); g_signal_connect ( win->priv->proxy, "g-signal", G_CALLBACK (on_media_key_pressed), win); g_signal_connect ( G_OBJECT (win), "focus-in-event", G_CALLBACK (window_focus_in_event_cb), win); remove_bus_watch (win); } static void clean_up (const gchar *name, PtWindow *win) { g_debug ("Couldn't find %s", name); if (win->priv->proxy) { g_object_unref (win->priv->proxy); win->priv->proxy = NULL; } remove_bus_watch (win); } static void name2_vanished_cb (GDBusConnection *connection, const gchar *name, PtWindow *win) { clean_up (name, win); /* We are done, nothing found */ } static void name1_vanished_cb (GDBusConnection *connection, const gchar *name, PtWindow *win) { clean_up (name, win); /* Now try org.gnome.SettingsDaemon ... */ win->priv->dbus_watch_id = g_bus_watch_name ( G_BUS_TYPE_SESSION, "org.gnome.SettingsDaemon", G_BUS_NAME_WATCHER_FLAGS_NONE, (GBusNameAppearedCallback) name_appeared_cb, (GBusNameVanishedCallback) name2_vanished_cb, win, NULL); } void setup_mediakeys (PtWindow *win) { win->priv->proxy = NULL; win->priv->dbus_watch_id = 0; /* watch for GNOME settings daemon and stop watching immediatetly after because we don't assume this will change later on */ win->priv->dbus_watch_id = g_bus_watch_name ( G_BUS_TYPE_SESSION, "org.gnome.SettingsDaemon.MediaKeys", G_BUS_NAME_WATCHER_FLAGS_NONE, (GBusNameAppearedCallback) name_appeared_cb, (GBusNameVanishedCallback) name1_vanished_cb, win, NULL); } parlatype-1.5.4/src/pt-app.h0000644000175000017500000000204313171727132012607 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #ifndef PT_APP_H #define PT_APP_H #include "config.h" #include #define PT_APP_TYPE (pt_app_get_type()) #define PT_APP(obj) (G_TYPE_CHECK_INSTANCE_CAST((obj), PT_APP_TYPE, PtApp)) typedef struct _PtApp PtApp; typedef struct _PtAppClass PtAppClass; GType pt_app_get_type (void) G_GNUC_CONST; PtApp *pt_app_new (void); #endif parlatype-1.5.4/src/pt-goto-dialog.c0000644000175000017500000001124613176574165014247 00000000000000/* Copyright (C) Gabor Karsay 2016 * * Based on Totem, string_to_time() almost unchanged, rest modified: * https://git.gnome.org/browse/totem/tree/src/plugins/skipto/totem-time-entry.c?h=gnome-3-14 * * Copyright (C) 2008 Philip Withnall * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #include "config.h" #include #include #include #include "pt-goto-dialog.h" struct _PtGotoDialogPrivate { GtkWidget *spin; GtkWidget *seconds_label; gint max; }; G_DEFINE_TYPE_WITH_PRIVATE (PtGotoDialog, pt_goto_dialog, GTK_TYPE_DIALOG) static gint string_to_time (const char *time_string) { gint sec, min, hour, args; /* Translators: This is a time format, like "2:05:30" for 2 hours, 5 minutes, and 30 seconds. You may change ":" to the separator that your locale uses or use "%Id" instead of "%d" if your locale uses localized digits. */ args = sscanf (time_string, C_("long time format", "%d:%02d:%02d"), &hour, &min, &sec); if (args == 3) { /* Parsed all three arguments successfully */ return (hour * (60 * 60) + min * 60 + sec) * 1000; } else if (args == 2) { /* Only parsed the first two arguments; treat hour and min as min and sec, respectively */ return (hour * 60 + min) * 1000; } else if (args == 1) { /* Only parsed the first argument; treat hour as sec */ return hour * 1000; } else { /* Error! */ return -1; } } void value_changed_cb (GtkSpinButton *spin, gpointer data) { PtGotoDialog *dlg = (PtGotoDialog *) data; GtkAdjustment *adj; gint value; adj = gtk_spin_button_get_adjustment (spin); value = (gint) gtk_adjustment_get_value (adj); gtk_label_set_label ( GTK_LABEL (dlg->priv->seconds_label), ngettext ("second", "seconds", value)); } gboolean output_cb (GtkSpinButton *spin, PtGotoDialog *dlg) { gchar *text; if (dlg->priv->max == 0) return GTK_INPUT_ERROR; text = pt_player_get_time_string ( gtk_spin_button_get_value_as_int (spin) * 1000, dlg->priv->max, 0); gtk_entry_set_text (GTK_ENTRY (spin), text); g_free (text); return TRUE; } gint input_cb (GtkSpinButton *self, gdouble *new_value, gpointer user_data) { gint64 val; val = string_to_time (gtk_entry_get_text (GTK_ENTRY (self))); if (val == -1) return GTK_INPUT_ERROR; *new_value = val / 1000; return TRUE; } static void pt_goto_dialog_init (PtGotoDialog *dlg) { dlg->priv = pt_goto_dialog_get_instance_private (dlg); gtk_widget_init_template (GTK_WIDGET (dlg)); dlg->priv->max = 0; /* make sure seconds label is set and translated */ value_changed_cb (GTK_SPIN_BUTTON (dlg->priv->spin), dlg); } static void pt_goto_dialog_class_init (PtGotoDialogClass *klass) { GtkWidgetClass *widget_class = GTK_WIDGET_CLASS (klass); /* Bind class to template */ gtk_widget_class_set_template_from_resource (widget_class, "/com/github/gkarsay/parlatype/goto-dialog.ui"); gtk_widget_class_bind_template_child_private (widget_class, PtGotoDialog, spin); gtk_widget_class_bind_template_child_private (widget_class, PtGotoDialog, seconds_label); } gint pt_goto_dialog_get_pos (PtGotoDialog *dlg) { return gtk_spin_button_get_value_as_int (GTK_SPIN_BUTTON (dlg->priv->spin)); } void pt_goto_dialog_set_pos (PtGotoDialog *dlg, gint seconds) { gtk_spin_button_set_value (GTK_SPIN_BUTTON (dlg->priv->spin), (gdouble) seconds); } void pt_goto_dialog_set_max (PtGotoDialog *dlg, gint seconds) { gchar *time_string; guint width; gtk_spin_button_set_range (GTK_SPIN_BUTTON (dlg->priv->spin), 0, (gdouble) seconds); dlg->priv->max = seconds * 1000; /* Set the width of the entry according to the length of the longest string it'll now accept */ time_string = pt_player_get_time_string (dlg->priv->max, dlg->priv->max, 0); width = strlen (time_string); g_free (time_string); gtk_entry_set_width_chars (GTK_ENTRY (dlg->priv->spin), width); } PtGotoDialog * pt_goto_dialog_new (GtkWindow *win) { return g_object_new ( PT_TYPE_GOTO_DIALOG, #if GTK_CHECK_VERSION(3,12,0) "use-header-bar", TRUE, #endif "transient-for", win, NULL); } parlatype-1.5.4/src/main.c0000644000175000017500000000411013176574165012335 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #include "config.h" #include #include #include /* setlocale */ #include #include "pt-app.h" static void fatal_error_message (const gchar *message) { GtkWidget *dialog; dialog = gtk_message_dialog_new ( NULL, /* this is discouraged, but we have no possible parent window */ 0, GTK_MESSAGE_ERROR, GTK_BUTTONS_OK, _("Fatal error")); gtk_message_dialog_format_secondary_text ( GTK_MESSAGE_DIALOG (dialog), _("Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s"), message); gtk_dialog_run (GTK_DIALOG (dialog)); gtk_widget_destroy (dialog); } int main (int argc, char *argv[]) { setlocale (LC_ALL, ""); bindtextdomain (PACKAGE, LOCALEDIR); textdomain (PACKAGE); GError *error = NULL; PtPlayer *testplayer; PtApp *app; gint app_status; /* Test the backend */ testplayer = pt_player_new (&error); if (error) { fatal_error_message (error->message); return 2; } else { g_object_unref (testplayer); } app = pt_app_new (); app_status = g_application_run (G_APPLICATION (app), argc, argv); g_object_unref (app); return app_status; } parlatype-1.5.4/src/pt-goto-dialog.h0000644000175000017500000000311413171727132014234 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #ifndef PT_GOTO_DIALOG_H #define PT_GOTO_DIALOG_H #include "config.h" #define PT_TYPE_GOTO_DIALOG (pt_goto_dialog_get_type()) #define PT_GOTO_DIALOG(obj) (G_TYPE_CHECK_INSTANCE_CAST((obj), PT_TYPE_GOTO_DIALOG, PtGotoDialog)) typedef struct _PtGotoDialog PtGotoDialog; typedef struct _PtGotoDialogClass PtGotoDialogClass; typedef struct _PtGotoDialogPrivate PtGotoDialogPrivate; struct _PtGotoDialog { GtkDialog dialog; /*< private > */ PtGotoDialogPrivate *priv; }; struct _PtGotoDialogClass { GtkDialogClass parent_class; }; GType pt_goto_dialog_get_type (void) G_GNUC_CONST; gint pt_goto_dialog_get_pos (PtGotoDialog *dlg); void pt_goto_dialog_set_pos (PtGotoDialog *dlg, gint seconds); void pt_goto_dialog_set_max (PtGotoDialog *dlg, gint seconds); PtGotoDialog *pt_goto_dialog_new (GtkWindow *win); G_END_DECLS #endif parlatype-1.5.4/src/pt-preferences.c0000644000175000017500000001673513200375206014332 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #include "config.h" #include #include #include #include #include "pt-preferences.h" static GtkWidget *preferences_dialog = NULL; struct _PtPreferencesDialogPrivate { GSettings *editor; GtkWidget *spin_pause; GtkWidget *spin_back; GtkWidget *spin_forward; GtkWidget *pps_scale; GtkWidget *label_pause; GtkWidget *label_back; GtkWidget *label_forward; GtkWidget *size_check; GtkWidget *pos_check; GtkWidget *top_check; GtkWidget *ruler_check; GtkWidget *fixed_cursor_radio; }; G_DEFINE_TYPE_WITH_PRIVATE (PtPreferencesDialog, pt_preferences_dialog, GTK_TYPE_DIALOG) void spin_back_changed_cb (GtkSpinButton *spin, PtPreferencesDialog *dlg) { gtk_label_set_label ( GTK_LABEL (dlg->priv->label_back), /* Translators: This is part of the Preferences dialog or the "Go to ..." dialog. There is a label like "Jump back:", "Jump forward:", "Jump back on pause:" or "Go to position:" before. */ ngettext ("second", "seconds", (int) gtk_spin_button_get_value_as_int (spin))); } void spin_forward_changed_cb (GtkSpinButton *spin, PtPreferencesDialog *dlg) { gtk_label_set_label ( GTK_LABEL (dlg->priv->label_forward), ngettext ("second", "seconds", (int) gtk_spin_button_get_value_as_int (spin))); } void spin_pause_changed_cb (GtkSpinButton *spin, PtPreferencesDialog *dlg) { gtk_label_set_label ( GTK_LABEL (dlg->priv->label_pause), ngettext ("second", "seconds", (int) gtk_spin_button_get_value_as_int (spin))); } gchar* format_value_cb (GtkScale *scale, gdouble value, gpointer data) { return g_strdup_printf ("%d", 25 * (gint) value); } gboolean get_pps (GValue *value, GVariant *variant, gpointer data) { gint32 pps; pps = g_variant_get_int32 (variant); if (pps < 25) pps = 25; g_value_set_double (value, (gdouble) (pps / 25)); return TRUE; } GVariant* set_pps (const GValue *value, const GVariantType *type, gpointer data) { gdouble pps; pps = g_value_get_double (value); pps = pps * 25; return g_variant_new_int32 ((gint32) pps); } static void pt_preferences_dialog_init (PtPreferencesDialog *dlg) { dlg->priv = pt_preferences_dialog_get_instance_private (dlg); dlg->priv->editor = g_settings_new ("com.github.gkarsay.parlatype"); gtk_widget_init_template (GTK_WIDGET (dlg)); g_settings_bind ( dlg->priv->editor, "rewind-on-pause", dlg->priv->spin_pause, "value", G_SETTINGS_BIND_DEFAULT); g_settings_bind ( dlg->priv->editor, "jump-back", dlg->priv->spin_back, "value", G_SETTINGS_BIND_DEFAULT); g_settings_bind ( dlg->priv->editor, "jump-forward", dlg->priv->spin_forward, "value", G_SETTINGS_BIND_DEFAULT); g_settings_bind ( dlg->priv->editor, "remember-size", dlg->priv->size_check, "active", G_SETTINGS_BIND_DEFAULT); GdkDisplay *display; display = gdk_display_get_default (); #ifdef GDK_WINDOWING_X11 if (GDK_IS_X11_DISPLAY (display)) { g_settings_bind ( dlg->priv->editor, "remember-position", dlg->priv->pos_check, "active", G_SETTINGS_BIND_DEFAULT); g_settings_bind ( dlg->priv->editor, "start-on-top", dlg->priv->top_check, "active", G_SETTINGS_BIND_DEFAULT); } #endif #ifdef GDK_WINDOWING_WAYLAND if (GDK_IS_WAYLAND_DISPLAY (display)) { gtk_widget_hide (dlg->priv->pos_check); gtk_widget_hide (dlg->priv->top_check); } #endif g_settings_bind ( dlg->priv->editor, "show-ruler", dlg->priv->ruler_check, "active", G_SETTINGS_BIND_DEFAULT); g_settings_bind ( dlg->priv->editor, "fixed-cursor", dlg->priv->fixed_cursor_radio, "active", G_SETTINGS_BIND_DEFAULT); GtkAdjustment *pps_adj; pps_adj = gtk_range_get_adjustment (GTK_RANGE (dlg->priv->pps_scale)); g_settings_bind_with_mapping ( dlg->priv->editor, "pps", pps_adj, "value", G_SETTINGS_BIND_DEFAULT, get_pps, set_pps, NULL, NULL); /* make sure labels are set and translated */ spin_back_changed_cb (GTK_SPIN_BUTTON (dlg->priv->spin_back), dlg); spin_forward_changed_cb (GTK_SPIN_BUTTON (dlg->priv->spin_forward), dlg); spin_pause_changed_cb (GTK_SPIN_BUTTON (dlg->priv->spin_pause), dlg); #if GTK_CHECK_VERSION(3,12,0) #else gtk_dialog_add_button (GTK_DIALOG (dlg), _("_Close"), -6); g_signal_connect_swapped (dlg, "response", G_CALLBACK (gtk_widget_destroy), dlg); #endif } static void pt_preferences_dialog_dispose (GObject *object) { PtPreferencesDialog *dlg = PT_PREFERENCES_DIALOG (object); g_clear_object (&dlg->priv->editor); G_OBJECT_CLASS (pt_preferences_dialog_parent_class)->dispose (object); } static void pt_preferences_dialog_class_init (PtPreferencesDialogClass *klass) { GObjectClass *object_class = G_OBJECT_CLASS (klass); GtkWidgetClass *widget_class = GTK_WIDGET_CLASS (klass); object_class->dispose = pt_preferences_dialog_dispose; /* Bind class to template */ gtk_widget_class_set_template_from_resource (widget_class, "/com/github/gkarsay/parlatype/preferences.ui"); gtk_widget_class_bind_template_child_private (widget_class, PtPreferencesDialog, spin_pause); gtk_widget_class_bind_template_child_private (widget_class, PtPreferencesDialog, spin_back); gtk_widget_class_bind_template_child_private (widget_class, PtPreferencesDialog, spin_forward); gtk_widget_class_bind_template_child_private (widget_class, PtPreferencesDialog, pps_scale); gtk_widget_class_bind_template_child_private (widget_class, PtPreferencesDialog, size_check); gtk_widget_class_bind_template_child_private (widget_class, PtPreferencesDialog, pos_check); gtk_widget_class_bind_template_child_private (widget_class, PtPreferencesDialog, top_check); gtk_widget_class_bind_template_child_private (widget_class, PtPreferencesDialog, label_pause); gtk_widget_class_bind_template_child_private (widget_class, PtPreferencesDialog, label_back); gtk_widget_class_bind_template_child_private (widget_class, PtPreferencesDialog, label_forward); gtk_widget_class_bind_template_child_private (widget_class, PtPreferencesDialog, ruler_check); gtk_widget_class_bind_template_child_private (widget_class, PtPreferencesDialog, fixed_cursor_radio); } void pt_show_preferences_dialog (GtkWindow *parent) { if (preferences_dialog == NULL) { preferences_dialog = GTK_WIDGET (g_object_new (PT_TYPE_PREFERENCES_DIALOG, #if GTK_CHECK_VERSION(3,12,0) "use-header-bar", TRUE, #endif NULL)); g_signal_connect (preferences_dialog, "destroy", G_CALLBACK (gtk_widget_destroyed), &preferences_dialog); } if (parent != gtk_window_get_transient_for (GTK_WINDOW (preferences_dialog))) { gtk_window_set_transient_for (GTK_WINDOW (preferences_dialog), GTK_WINDOW (parent)); gtk_window_set_modal (GTK_WINDOW (preferences_dialog), FALSE); gtk_window_set_destroy_with_parent (GTK_WINDOW (preferences_dialog), TRUE); } gtk_window_present (GTK_WINDOW (preferences_dialog)); } parlatype-1.5.4/src/pt-resources.c0000644000175000017500000100007613204122232014024 00000000000000#include #if defined (__ELF__) && ( __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 6)) # define SECTION __attribute__ ((section (".gresource.parlatype"), aligned (8))) #else # define SECTION #endif static const SECTION union { const guint8 data[40483]; const double alignment; void * const ptr;} parlatype_resource_data = { { 0x47, 0x56, 0x61, 0x72, 0x69, 0x61, 0x6e, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0xc4, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x0a, 0x00, 0x00, 0x00, 0x0a, 0x00, 0x00, 0x00, 0x0b, 0x00, 0x00, 0x00, 0x0b, 0x00, 0x00, 0x00, 0x0b, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00, 0x0e, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, 0x5a, 0x04, 0x9f, 0x20, 0x02, 0x00, 0x00, 0x00, 0xc4, 0x01, 0x00, 0x00, 0x09, 0x00, 0x76, 0x00, 0xd0, 0x01, 0x00, 0x00, 0x60, 0x2b, 0x00, 0x00, 0x6f, 0xec, 0xff, 0x49, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x2b, 0x00, 0x00, 0x0f, 0x00, 0x76, 0x00, 0x70, 0x2b, 0x00, 0x00, 0x61, 0x38, 0x00, 0x00, 0xd6, 0x8d, 0x7d, 0x1f, 0x05, 0x00, 0x00, 0x00, 0x61, 0x38, 0x00, 0x00, 0x0a, 0x00, 0x4c, 0x00, 0x6c, 0x38, 0x00, 0x00, 0x8c, 0x38, 0x00, 0x00, 0xd8, 0x50, 0x33, 0x5a, 0x02, 0x00, 0x00, 0x00, 0x8c, 0x38, 0x00, 0x00, 0x0e, 0x00, 0x76, 0x00, 0xa0, 0x38, 0x00, 0x00, 0x30, 0x47, 0x00, 0x00, 0x41, 0xfb, 0x0d, 0x32, 0x02, 0x00, 0x00, 0x00, 0x30, 0x47, 0x00, 0x00, 0x06, 0x00, 0x4c, 0x00, 0x38, 0x47, 0x00, 0x00, 0x3c, 0x47, 0x00, 0x00, 0x35, 0xc7, 0x82, 0x66, 0x0c, 0x00, 0x00, 0x00, 0x3c, 0x47, 0x00, 0x00, 0x08, 0x00, 0x4c, 0x00, 0x44, 0x47, 0x00, 0x00, 0x48, 0x47, 0x00, 0x00, 0xd4, 0xb5, 0x02, 0x00, 0xff, 0xff, 0xff, 0xff, 0x48, 0x47, 0x00, 0x00, 0x01, 0x00, 0x4c, 0x00, 0x4c, 0x47, 0x00, 0x00, 0x50, 0x47, 0x00, 0x00, 0x74, 0x7d, 0x2c, 0x32, 0x02, 0x00, 0x00, 0x00, 0x50, 0x47, 0x00, 0x00, 0x0e, 0x00, 0x76, 0x00, 0x60, 0x47, 0x00, 0x00, 0xa4, 0x7c, 0x00, 0x00, 0xaa, 0x2a, 0x9f, 0x36, 0x02, 0x00, 0x00, 0x00, 0xa4, 0x7c, 0x00, 0x00, 0x08, 0x00, 0x76, 0x00, 0xb0, 0x7c, 0x00, 0x00, 0xa6, 0x92, 0x00, 0x00, 0xe5, 0x79, 0x57, 0x99, 0x02, 0x00, 0x00, 0x00, 0xa6, 0x92, 0x00, 0x00, 0x13, 0x00, 0x76, 0x00, 0xc0, 0x92, 0x00, 0x00, 0x3d, 0x9a, 0x00, 0x00, 0xc2, 0xaf, 0x89, 0x0b, 0x06, 0x00, 0x00, 0x00, 0x3d, 0x9a, 0x00, 0x00, 0x04, 0x00, 0x4c, 0x00, 0x44, 0x9a, 0x00, 0x00, 0x48, 0x9a, 0x00, 0x00, 0x4b, 0xff, 0xd6, 0x9c, 0x02, 0x00, 0x00, 0x00, 0x48, 0x9a, 0x00, 0x00, 0x04, 0x00, 0x4c, 0x00, 0x4c, 0x9a, 0x00, 0x00, 0x50, 0x9a, 0x00, 0x00, 0x94, 0x5d, 0xdc, 0x97, 0x0a, 0x00, 0x00, 0x00, 0x50, 0x9a, 0x00, 0x00, 0x07, 0x00, 0x4c, 0x00, 0x58, 0x9a, 0x00, 0x00, 0x5c, 0x9a, 0x00, 0x00, 0x52, 0x48, 0x54, 0x4a, 0x04, 0x00, 0x00, 0x00, 0x5c, 0x9a, 0x00, 0x00, 0x0a, 0x00, 0x76, 0x00, 0x68, 0x9a, 0x00, 0x00, 0xda, 0x9c, 0x00, 0x00, 0x5f, 0xb2, 0x55, 0x87, 0x02, 0x00, 0x00, 0x00, 0xda, 0x9c, 0x00, 0x00, 0x0d, 0x00, 0x76, 0x00, 0xe8, 0x9c, 0x00, 0x00, 0x23, 0x9e, 0x00, 0x00, 0x77, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x2e, 0x75, 0x69, 0x00, 0x00, 0x00, 0x80, 0x29, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x3f, 0x78, 0x6d, 0x6c, 0x20, 0x76, 0x65, 0x72, 0x73, 0x69, 0x6f, 0x6e, 0x3d, 0x22, 0x31, 0x2e, 0x30, 0x22, 0x20, 0x65, 0x6e, 0x63, 0x6f, 0x64, 0x69, 0x6e, 0x67, 0x3d, 0x22, 0x55, 0x54, 0x46, 0x2d, 0x38, 0x22, 0x3f, 0x3e, 0x0a, 0x3c, 0x21, 0x2d, 0x2d, 0x20, 0x47, 0x65, 0x6e, 0x65, 0x72, 0x61, 0x74, 0x65, 0x64, 0x20, 0x77, 0x69, 0x74, 0x68, 0x20, 0x67, 0x6c, 0x61, 0x64, 0x65, 0x20, 0x33, 0x2e, 0x31, 0x38, 0x2e, 0x33, 0x20, 0x2d, 0x2d, 0x3e, 0x0a, 0x3c, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x66, 0x61, 0x63, 0x65, 0x3e, 0x3c, 0x72, 0x65, 0x71, 0x75, 0x69, 0x72, 0x65, 0x73, 0x20, 0x6c, 0x69, 0x62, 0x3d, 0x22, 0x67, 0x74, 0x6b, 0x2b, 0x22, 0x20, 0x76, 0x65, 0x72, 0x73, 0x69, 0x6f, 0x6e, 0x3d, 0x22, 0x33, 0x2e, 0x31, 0x30, 0x22, 0x2f, 0x3e, 0x3c, 0x72, 0x65, 0x71, 0x75, 0x69, 0x72, 0x65, 0x73, 0x20, 0x6c, 0x69, 0x62, 0x3d, 0x22, 0x70, 0x61, 0x72, 0x6c, 0x61, 0x74, 0x79, 0x70, 0x65, 0x22, 0x20, 0x76, 0x65, 0x72, 0x73, 0x69, 0x6f, 0x6e, 0x3d, 0x22, 0x30, 0x2e, 0x30, 0x22, 0x2f, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x41, 0x64, 0x6a, 0x75, 0x73, 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x73, 0x65, 0x65, 0x6b, 0x5f, 0x61, 0x64, 0x6a, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x6f, 0x77, 0x65, 0x72, 0x22, 0x3e, 0x2d, 0x33, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x70, 0x70, 0x65, 0x72, 0x22, 0x3e, 0x33, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x74, 0x65, 0x70, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x30, 0x2e, 0x31, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x61, 0x67, 0x65, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x31, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x41, 0x64, 0x6a, 0x75, 0x73, 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x73, 0x70, 0x65, 0x65, 0x64, 0x5f, 0x61, 0x64, 0x6a, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x6f, 0x77, 0x65, 0x72, 0x22, 0x3e, 0x30, 0x2e, 0x35, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x70, 0x70, 0x65, 0x72, 0x22, 0x3e, 0x31, 0x2e, 0x35, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x74, 0x65, 0x70, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x30, 0x2e, 0x31, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x61, 0x67, 0x65, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x30, 0x2e, 0x31, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x41, 0x64, 0x6a, 0x75, 0x73, 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x74, 0x69, 0x6d, 0x65, 0x5f, 0x61, 0x64, 0x6a, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x70, 0x70, 0x65, 0x72, 0x22, 0x3e, 0x31, 0x30, 0x30, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x74, 0x65, 0x70, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x61, 0x67, 0x65, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x31, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x41, 0x64, 0x6a, 0x75, 0x73, 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x76, 0x6f, 0x6c, 0x5f, 0x61, 0x64, 0x6a, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x70, 0x70, 0x65, 0x72, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x74, 0x65, 0x70, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x30, 0x2e, 0x31, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x61, 0x67, 0x65, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x30, 0x2e, 0x31, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x74, 0x65, 0x6d, 0x70, 0x6c, 0x61, 0x74, 0x65, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x50, 0x74, 0x57, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x22, 0x20, 0x70, 0x61, 0x72, 0x65, 0x6e, 0x74, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x41, 0x70, 0x70, 0x6c, 0x69, 0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e, 0x57, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x50, 0x61, 0x72, 0x6c, 0x61, 0x74, 0x79, 0x70, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x77, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x5f, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x63, 0x65, 0x6e, 0x74, 0x65, 0x72, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x47, 0x72, 0x69, 0x64, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6d, 0x61, 0x69, 0x6e, 0x5f, 0x67, 0x72, 0x69, 0x64, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x6f, 0x77, 0x5f, 0x73, 0x70, 0x61, 0x63, 0x69, 0x6e, 0x67, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x6f, 0x78, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x6f, 0x78, 0x31, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x62, 0x6f, 0x72, 0x64, 0x65, 0x72, 0x5f, 0x77, 0x69, 0x64, 0x74, 0x68, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6f, 0x72, 0x69, 0x65, 0x6e, 0x74, 0x61, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x76, 0x65, 0x72, 0x74, 0x69, 0x63, 0x61, 0x6c, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x70, 0x61, 0x63, 0x69, 0x6e, 0x67, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x50, 0x74, 0x57, 0x61, 0x76, 0x65, 0x76, 0x69, 0x65, 0x77, 0x65, 0x72, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x77, 0x61, 0x76, 0x65, 0x76, 0x69, 0x65, 0x77, 0x65, 0x72, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x75, 0x72, 0x73, 0x6f, 0x72, 0x2d, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x63, 0x75, 0x72, 0x73, 0x6f, 0x72, 0x5f, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6c, 0x61, 0x79, 0x2d, 0x74, 0x6f, 0x67, 0x67, 0x6c, 0x65, 0x64, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x70, 0x6c, 0x61, 0x79, 0x5f, 0x74, 0x6f, 0x67, 0x67, 0x6c, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x65, 0x6c, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x2d, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x73, 0x65, 0x6c, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x5f, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x6f, 0x78, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x6f, 0x78, 0x33, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x70, 0x61, 0x63, 0x69, 0x6e, 0x67, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x6f, 0x78, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x6f, 0x78, 0x34, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x6a, 0x75, 0x6d, 0x70, 0x5f, 0x62, 0x61, 0x63, 0x6b, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x65, 0x6e, 0x73, 0x69, 0x74, 0x69, 0x76, 0x65, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x73, 0x74, 0x61, 0x72, 0x74, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x6c, 0x69, 0x63, 0x6b, 0x65, 0x64, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x6a, 0x75, 0x6d, 0x70, 0x5f, 0x62, 0x61, 0x63, 0x6b, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x63, 0x6c, 0x69, 0x63, 0x6b, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x49, 0x6d, 0x61, 0x67, 0x65, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x69, 0x63, 0x6f, 0x6e, 0x5f, 0x73, 0x65, 0x65, 0x6b, 0x5f, 0x62, 0x61, 0x63, 0x6b, 0x31, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x74, 0x6f, 0x63, 0x6b, 0x22, 0x3e, 0x67, 0x74, 0x6b, 0x2d, 0x6d, 0x65, 0x64, 0x69, 0x61, 0x2d, 0x70, 0x72, 0x65, 0x76, 0x69, 0x6f, 0x75, 0x73, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x66, 0x61, 0x73, 0x74, 0x5f, 0x62, 0x61, 0x63, 0x6b, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x73, 0x74, 0x61, 0x72, 0x74, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x2d, 0x70, 0x72, 0x65, 0x73, 0x73, 0x2d, 0x65, 0x76, 0x65, 0x6e, 0x74, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x66, 0x61, 0x73, 0x74, 0x5f, 0x62, 0x61, 0x63, 0x6b, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x70, 0x72, 0x65, 0x73, 0x73, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x2d, 0x72, 0x65, 0x6c, 0x65, 0x61, 0x73, 0x65, 0x2d, 0x65, 0x76, 0x65, 0x6e, 0x74, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x66, 0x61, 0x73, 0x74, 0x5f, 0x62, 0x61, 0x63, 0x6b, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x72, 0x65, 0x6c, 0x65, 0x61, 0x73, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x49, 0x6d, 0x61, 0x67, 0x65, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x69, 0x63, 0x6f, 0x6e, 0x5f, 0x73, 0x65, 0x65, 0x6b, 0x5f, 0x62, 0x61, 0x63, 0x6b, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x74, 0x6f, 0x63, 0x6b, 0x22, 0x3e, 0x67, 0x74, 0x6b, 0x2d, 0x6d, 0x65, 0x64, 0x69, 0x61, 0x2d, 0x72, 0x65, 0x77, 0x69, 0x6e, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x63, 0x61, 0x6c, 0x65, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x73, 0x65, 0x65, 0x6b, 0x5f, 0x73, 0x63, 0x61, 0x6c, 0x65, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x77, 0x69, 0x64, 0x74, 0x68, 0x5f, 0x72, 0x65, 0x71, 0x75, 0x65, 0x73, 0x74, 0x22, 0x3e, 0x36, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x73, 0x74, 0x61, 0x72, 0x74, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x64, 0x6a, 0x75, 0x73, 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x73, 0x65, 0x65, 0x6b, 0x5f, 0x61, 0x64, 0x6a, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x6f, 0x77, 0x65, 0x72, 0x5f, 0x73, 0x74, 0x65, 0x70, 0x70, 0x65, 0x72, 0x5f, 0x73, 0x65, 0x6e, 0x73, 0x69, 0x74, 0x69, 0x76, 0x69, 0x74, 0x79, 0x22, 0x3e, 0x6f, 0x66, 0x66, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x70, 0x70, 0x65, 0x72, 0x5f, 0x73, 0x74, 0x65, 0x70, 0x70, 0x65, 0x72, 0x5f, 0x73, 0x65, 0x6e, 0x73, 0x69, 0x74, 0x69, 0x76, 0x69, 0x74, 0x79, 0x22, 0x3e, 0x6f, 0x66, 0x66, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x64, 0x72, 0x61, 0x77, 0x5f, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x73, 0x5f, 0x6f, 0x72, 0x69, 0x67, 0x69, 0x6e, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x5f, 0x70, 0x6f, 0x73, 0x22, 0x3e, 0x72, 0x69, 0x67, 0x68, 0x74, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x66, 0x61, 0x73, 0x74, 0x5f, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x73, 0x74, 0x61, 0x72, 0x74, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x2d, 0x70, 0x72, 0x65, 0x73, 0x73, 0x2d, 0x65, 0x76, 0x65, 0x6e, 0x74, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x66, 0x61, 0x73, 0x74, 0x5f, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x70, 0x72, 0x65, 0x73, 0x73, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x2d, 0x72, 0x65, 0x6c, 0x65, 0x61, 0x73, 0x65, 0x2d, 0x65, 0x76, 0x65, 0x6e, 0x74, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x66, 0x61, 0x73, 0x74, 0x5f, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x72, 0x65, 0x6c, 0x65, 0x61, 0x73, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x49, 0x6d, 0x61, 0x67, 0x65, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x69, 0x63, 0x6f, 0x6e, 0x5f, 0x73, 0x65, 0x65, 0x6b, 0x5f, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x74, 0x6f, 0x63, 0x6b, 0x22, 0x3e, 0x67, 0x74, 0x6b, 0x2d, 0x6d, 0x65, 0x64, 0x69, 0x61, 0x2d, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x33, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x6a, 0x75, 0x6d, 0x70, 0x5f, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x65, 0x6e, 0x73, 0x69, 0x74, 0x69, 0x76, 0x65, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x73, 0x74, 0x61, 0x72, 0x74, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x6c, 0x69, 0x63, 0x6b, 0x65, 0x64, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x6a, 0x75, 0x6d, 0x70, 0x5f, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x63, 0x6c, 0x69, 0x63, 0x6b, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x49, 0x6d, 0x61, 0x67, 0x65, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x69, 0x63, 0x6f, 0x6e, 0x5f, 0x73, 0x65, 0x65, 0x6b, 0x5f, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x31, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x74, 0x6f, 0x63, 0x6b, 0x22, 0x3e, 0x67, 0x74, 0x6b, 0x2d, 0x6d, 0x65, 0x64, 0x69, 0x61, 0x2d, 0x6e, 0x65, 0x78, 0x74, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x34, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x73, 0x74, 0x79, 0x6c, 0x65, 0x3e, 0x3c, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x69, 0x6e, 0x6b, 0x65, 0x64, 0x22, 0x2f, 0x3e, 0x3c, 0x2f, 0x73, 0x74, 0x79, 0x6c, 0x65, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x6f, 0x78, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x6f, 0x78, 0x32, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x70, 0x61, 0x63, 0x69, 0x6e, 0x67, 0x22, 0x3e, 0x31, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x54, 0x6f, 0x67, 0x67, 0x6c, 0x65, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x67, 0x6f, 0x74, 0x6f, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x3e, 0x74, 0x6f, 0x67, 0x67, 0x6c, 0x65, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6e, 0x61, 0x6d, 0x65, 0x22, 0x3e, 0x67, 0x6f, 0x74, 0x6f, 0x5f, 0x63, 0x75, 0x72, 0x73, 0x6f, 0x72, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x63, 0x65, 0x6e, 0x74, 0x65, 0x72, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x63, 0x65, 0x6e, 0x74, 0x65, 0x72, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6d, 0x61, 0x72, 0x67, 0x69, 0x6e, 0x5f, 0x6c, 0x65, 0x66, 0x74, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x45, 0x76, 0x65, 0x6e, 0x74, 0x42, 0x6f, 0x78, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x5f, 0x62, 0x6f, 0x78, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x5f, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6e, 0x61, 0x6d, 0x65, 0x22, 0x3e, 0x74, 0x69, 0x6d, 0x65, 0x5f, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x3e, 0x30, 0x30, 0x3a, 0x30, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x69, 0x6e, 0x67, 0x6c, 0x65, 0x5f, 0x6c, 0x69, 0x6e, 0x65, 0x5f, 0x6d, 0x6f, 0x64, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x69, 0x6e, 0x65, 0x73, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x56, 0x6f, 0x6c, 0x75, 0x6d, 0x65, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x76, 0x6f, 0x6c, 0x75, 0x6d, 0x65, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x73, 0x5f, 0x74, 0x6f, 0x6f, 0x6c, 0x74, 0x69, 0x70, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x65, 0x6e, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x6c, 0x69, 0x65, 0x66, 0x22, 0x3e, 0x6e, 0x6f, 0x6e, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x73, 0x74, 0x6f, 0x63, 0x6b, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x5f, 0x6f, 0x6e, 0x5f, 0x63, 0x6c, 0x69, 0x63, 0x6b, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6f, 0x72, 0x69, 0x65, 0x6e, 0x74, 0x61, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x76, 0x65, 0x72, 0x74, 0x69, 0x63, 0x61, 0x6c, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x64, 0x6a, 0x75, 0x73, 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x76, 0x6f, 0x6c, 0x5f, 0x61, 0x64, 0x6a, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x69, 0x63, 0x6f, 0x6e, 0x73, 0x22, 0x3e, 0x61, 0x75, 0x64, 0x69, 0x6f, 0x2d, 0x76, 0x6f, 0x6c, 0x75, 0x6d, 0x65, 0x2d, 0x6d, 0x75, 0x74, 0x65, 0x64, 0x0a, 0x61, 0x75, 0x64, 0x69, 0x6f, 0x2d, 0x76, 0x6f, 0x6c, 0x75, 0x6d, 0x65, 0x2d, 0x68, 0x69, 0x67, 0x68, 0x0a, 0x61, 0x75, 0x64, 0x69, 0x6f, 0x2d, 0x76, 0x6f, 0x6c, 0x75, 0x6d, 0x65, 0x2d, 0x6c, 0x6f, 0x77, 0x0a, 0x61, 0x75, 0x64, 0x69, 0x6f, 0x2d, 0x76, 0x6f, 0x6c, 0x75, 0x6d, 0x65, 0x2d, 0x6d, 0x65, 0x64, 0x69, 0x75, 0x6d, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x73, 0x79, 0x6d, 0x62, 0x6f, 0x6c, 0x69, 0x63, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x20, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x6e, 0x61, 0x6c, 0x2d, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3d, 0x22, 0x70, 0x6c, 0x75, 0x73, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x76, 0x6f, 0x6c, 0x75, 0x6d, 0x65, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x2d, 0x70, 0x6c, 0x75, 0x73, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x20, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x6e, 0x61, 0x6c, 0x2d, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3d, 0x22, 0x6d, 0x69, 0x6e, 0x75, 0x73, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x76, 0x6f, 0x6c, 0x75, 0x6d, 0x65, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x2d, 0x6d, 0x69, 0x6e, 0x75, 0x73, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x61, 0x63, 0x6b, 0x5f, 0x74, 0x79, 0x70, 0x65, 0x22, 0x3e, 0x65, 0x6e, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x33, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x63, 0x61, 0x6c, 0x65, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x73, 0x70, 0x65, 0x65, 0x64, 0x5f, 0x73, 0x63, 0x61, 0x6c, 0x65, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x77, 0x69, 0x64, 0x74, 0x68, 0x5f, 0x72, 0x65, 0x71, 0x75, 0x65, 0x73, 0x74, 0x22, 0x3e, 0x31, 0x31, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x65, 0x6e, 0x73, 0x69, 0x74, 0x69, 0x76, 0x65, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x65, 0x6e, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x64, 0x6a, 0x75, 0x73, 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x73, 0x70, 0x65, 0x65, 0x64, 0x5f, 0x61, 0x64, 0x6a, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x6f, 0x77, 0x65, 0x72, 0x5f, 0x73, 0x74, 0x65, 0x70, 0x70, 0x65, 0x72, 0x5f, 0x73, 0x65, 0x6e, 0x73, 0x69, 0x74, 0x69, 0x76, 0x69, 0x74, 0x79, 0x22, 0x3e, 0x6f, 0x66, 0x66, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x70, 0x70, 0x65, 0x72, 0x5f, 0x73, 0x74, 0x65, 0x70, 0x70, 0x65, 0x72, 0x5f, 0x73, 0x65, 0x6e, 0x73, 0x69, 0x74, 0x69, 0x76, 0x69, 0x74, 0x79, 0x22, 0x3e, 0x6f, 0x66, 0x66, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x5f, 0x70, 0x6f, 0x73, 0x22, 0x3e, 0x72, 0x69, 0x67, 0x68, 0x74, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x64, 0x69, 0x72, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x2d, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x73, 0x70, 0x65, 0x65, 0x64, 0x5f, 0x73, 0x63, 0x61, 0x6c, 0x65, 0x5f, 0x64, 0x69, 0x72, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x5f, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x2d, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x73, 0x70, 0x65, 0x65, 0x64, 0x5f, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x61, 0x63, 0x6b, 0x5f, 0x74, 0x79, 0x70, 0x65, 0x22, 0x3e, 0x65, 0x6e, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x35, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x5f, 0x73, 0x70, 0x65, 0x65, 0x64, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x65, 0x6e, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x53, 0x70, 0x65, 0x65, 0x64, 0x3a, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x61, 0x63, 0x6b, 0x5f, 0x74, 0x79, 0x70, 0x65, 0x22, 0x3e, 0x65, 0x6e, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x70, 0x6c, 0x61, 0x63, 0x65, 0x68, 0x6f, 0x6c, 0x64, 0x65, 0x72, 0x2f, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x74, 0x65, 0x6d, 0x70, 0x6c, 0x61, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x66, 0x61, 0x63, 0x65, 0x3e, 0x0a, 0x00, 0x00, 0x28, 0x75, 0x75, 0x61, 0x79, 0x29, 0x68, 0x65, 0x6c, 0x70, 0x2d, 0x6f, 0x76, 0x65, 0x72, 0x6c, 0x61, 0x79, 0x2e, 0x75, 0x69, 0x00, 0xe1, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x3f, 0x78, 0x6d, 0x6c, 0x20, 0x76, 0x65, 0x72, 0x73, 0x69, 0x6f, 0x6e, 0x3d, 0x22, 0x31, 0x2e, 0x30, 0x22, 0x20, 0x65, 0x6e, 0x63, 0x6f, 0x64, 0x69, 0x6e, 0x67, 0x3d, 0x22, 0x55, 0x54, 0x46, 0x2d, 0x38, 0x22, 0x3f, 0x3e, 0x0a, 0x3c, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x66, 0x61, 0x63, 0x65, 0x3e, 0x3c, 0x21, 0x2d, 0x2d, 0x20, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x66, 0x61, 0x63, 0x65, 0x2d, 0x72, 0x65, 0x71, 0x75, 0x69, 0x72, 0x65, 0x73, 0x20, 0x67, 0x74, 0x6b, 0x2b, 0x20, 0x33, 0x2e, 0x32, 0x30, 0x20, 0x2d, 0x2d, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x57, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x68, 0x65, 0x6c, 0x70, 0x5f, 0x6f, 0x76, 0x65, 0x72, 0x6c, 0x61, 0x79, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6d, 0x6f, 0x64, 0x61, 0x6c, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x53, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x2d, 0x6e, 0x61, 0x6d, 0x65, 0x22, 0x3e, 0x73, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6d, 0x61, 0x78, 0x2d, 0x68, 0x65, 0x69, 0x67, 0x68, 0x74, 0x22, 0x3e, 0x31, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x47, 0x72, 0x6f, 0x75, 0x70, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x47, 0x65, 0x6e, 0x65, 0x72, 0x61, 0x6c, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x26, 0x6c, 0x74, 0x3b, 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, 0x74, 0x3b, 0x4f, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x4f, 0x70, 0x65, 0x6e, 0x20, 0x61, 0x20, 0x6d, 0x65, 0x64, 0x69, 0x61, 0x20, 0x66, 0x69, 0x6c, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x26, 0x6c, 0x74, 0x3b, 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, 0x74, 0x3b, 0x52, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x4f, 0x70, 0x65, 0x6e, 0x20, 0x72, 0x65, 0x63, 0x65, 0x6e, 0x74, 0x6c, 0x79, 0x20, 0x75, 0x73, 0x65, 0x64, 0x20, 0x6d, 0x65, 0x64, 0x69, 0x61, 0x20, 0x66, 0x69, 0x6c, 0x65, 0x73, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x46, 0x31, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x53, 0x68, 0x6f, 0x77, 0x2f, 0x68, 0x69, 0x64, 0x65, 0x20, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x20, 0x6d, 0x65, 0x6e, 0x75, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x26, 0x6c, 0x74, 0x3b, 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, 0x74, 0x3b, 0x51, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x51, 0x75, 0x69, 0x74, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x47, 0x72, 0x6f, 0x75, 0x70, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x57, 0x61, 0x76, 0x65, 0x66, 0x6f, 0x72, 0x6d, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x26, 0x6c, 0x74, 0x3b, 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, 0x74, 0x3b, 0x70, 0x6c, 0x75, 0x73, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x5a, 0x6f, 0x6f, 0x6d, 0x20, 0x69, 0x6e, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x26, 0x6c, 0x74, 0x3b, 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, 0x74, 0x3b, 0x6d, 0x69, 0x6e, 0x75, 0x73, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x5a, 0x6f, 0x6f, 0x6d, 0x20, 0x6f, 0x75, 0x74, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x26, 0x6c, 0x74, 0x3b, 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, 0x74, 0x3b, 0x47, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x4f, 0x70, 0x65, 0x6e, 0x20, 0xe2, 0x80, 0x9c, 0x47, 0x6f, 0x20, 0x74, 0x6f, 0xe2, 0x80, 0x9d, 0x20, 0x64, 0x69, 0x61, 0x6c, 0x6f, 0x67, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x26, 0x6c, 0x74, 0x3b, 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, 0x74, 0x3b, 0x43, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x43, 0x6f, 0x70, 0x79, 0x20, 0x74, 0x69, 0x6d, 0x65, 0x73, 0x74, 0x61, 0x6d, 0x70, 0x20, 0x74, 0x6f, 0x20, 0x63, 0x6c, 0x69, 0x70, 0x62, 0x6f, 0x61, 0x72, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x26, 0x6c, 0x74, 0x3b, 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, 0x74, 0x3b, 0x56, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x47, 0x6f, 0x20, 0x74, 0x6f, 0x20, 0x74, 0x69, 0x6d, 0x65, 0x73, 0x74, 0x61, 0x6d, 0x70, 0x20, 0x69, 0x6e, 0x20, 0x63, 0x6c, 0x69, 0x70, 0x62, 0x6f, 0x61, 0x72, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x47, 0x72, 0x6f, 0x75, 0x70, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x48, 0x65, 0x6c, 0x70, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x46, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x53, 0x68, 0x6f, 0x77, 0x20, 0x68, 0x65, 0x6c, 0x70, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x26, 0x6c, 0x74, 0x3b, 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, 0x74, 0x3b, 0x46, 0x31, 0x20, 0x26, 0x6c, 0x74, 0x3b, 0x63, 0x74, 0x72, 0x6c, 0x26, 0x67, 0x74, 0x3b, 0x71, 0x75, 0x65, 0x73, 0x74, 0x69, 0x6f, 0x6e, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x53, 0x68, 0x6f, 0x77, 0x20, 0x6b, 0x65, 0x79, 0x62, 0x6f, 0x61, 0x72, 0x64, 0x20, 0x73, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x66, 0x61, 0x63, 0x65, 0x3e, 0x0a, 0x00, 0x00, 0x28, 0x75, 0x75, 0x61, 0x79, 0x29, 0x70, 0x61, 0x72, 0x6c, 0x61, 0x74, 0x79, 0x70, 0x65, 0x2f, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0b, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x0e, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x67, 0x6f, 0x74, 0x6f, 0x2d, 0x64, 0x69, 0x61, 0x6c, 0x6f, 0x67, 0x2e, 0x75, 0x69, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x0e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x3f, 0x78, 0x6d, 0x6c, 0x20, 0x76, 0x65, 0x72, 0x73, 0x69, 0x6f, 0x6e, 0x3d, 0x22, 0x31, 0x2e, 0x30, 0x22, 0x20, 0x65, 0x6e, 0x63, 0x6f, 0x64, 0x69, 0x6e, 0x67, 0x3d, 0x22, 0x55, 0x54, 0x46, 0x2d, 0x38, 0x22, 0x3f, 0x3e, 0x0a, 0x3c, 0x21, 0x2d, 0x2d, 0x20, 0x47, 0x65, 0x6e, 0x65, 0x72, 0x61, 0x74, 0x65, 0x64, 0x20, 0x77, 0x69, 0x74, 0x68, 0x20, 0x67, 0x6c, 0x61, 0x64, 0x65, 0x20, 0x33, 0x2e, 0x31, 0x38, 0x2e, 0x33, 0x20, 0x2d, 0x2d, 0x3e, 0x0a, 0x3c, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x66, 0x61, 0x63, 0x65, 0x3e, 0x3c, 0x72, 0x65, 0x71, 0x75, 0x69, 0x72, 0x65, 0x73, 0x20, 0x6c, 0x69, 0x62, 0x3d, 0x22, 0x67, 0x74, 0x6b, 0x2b, 0x22, 0x20, 0x76, 0x65, 0x72, 0x73, 0x69, 0x6f, 0x6e, 0x3d, 0x22, 0x33, 0x2e, 0x31, 0x30, 0x22, 0x2f, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x41, 0x64, 0x6a, 0x75, 0x73, 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x61, 0x64, 0x6a, 0x5f, 0x73, 0x70, 0x69, 0x6e, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x70, 0x70, 0x65, 0x72, 0x22, 0x3e, 0x31, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x74, 0x65, 0x70, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x61, 0x67, 0x65, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x31, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x74, 0x65, 0x6d, 0x70, 0x6c, 0x61, 0x74, 0x65, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x50, 0x74, 0x47, 0x6f, 0x74, 0x6f, 0x44, 0x69, 0x61, 0x6c, 0x6f, 0x67, 0x22, 0x20, 0x70, 0x61, 0x72, 0x65, 0x6e, 0x74, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x44, 0x69, 0x61, 0x6c, 0x6f, 0x67, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x62, 0x6f, 0x72, 0x64, 0x65, 0x72, 0x5f, 0x77, 0x69, 0x64, 0x74, 0x68, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x47, 0x6f, 0x20, 0x74, 0x6f, 0x20, 0x2e, 0x2e, 0x2e, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x79, 0x70, 0x65, 0x5f, 0x68, 0x69, 0x6e, 0x74, 0x22, 0x3e, 0x64, 0x69, 0x61, 0x6c, 0x6f, 0x67, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x20, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x6e, 0x61, 0x6c, 0x2d, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3d, 0x22, 0x76, 0x62, 0x6f, 0x78, 0x22, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x6f, 0x78, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x64, 0x69, 0x61, 0x6c, 0x6f, 0x67, 0x2d, 0x76, 0x62, 0x6f, 0x78, 0x31, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6f, 0x72, 0x69, 0x65, 0x6e, 0x74, 0x61, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x76, 0x65, 0x72, 0x74, 0x69, 0x63, 0x61, 0x6c, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x70, 0x61, 0x63, 0x69, 0x6e, 0x67, 0x22, 0x3e, 0x31, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x20, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x6e, 0x61, 0x6c, 0x2d, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x5f, 0x61, 0x72, 0x65, 0x61, 0x22, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x42, 0x6f, 0x78, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x64, 0x69, 0x61, 0x6c, 0x6f, 0x67, 0x2d, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x5f, 0x61, 0x72, 0x65, 0x61, 0x31, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x79, 0x6f, 0x75, 0x74, 0x5f, 0x73, 0x74, 0x79, 0x6c, 0x65, 0x22, 0x3e, 0x65, 0x6e, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x31, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x3e, 0x67, 0x74, 0x6b, 0x2d, 0x63, 0x61, 0x6e, 0x63, 0x65, 0x6c, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x73, 0x74, 0x6f, 0x63, 0x6b, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x32, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x3e, 0x67, 0x74, 0x6b, 0x2d, 0x6f, 0x6b, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x73, 0x74, 0x6f, 0x63, 0x6b, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x6f, 0x78, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x6f, 0x78, 0x31, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x70, 0x61, 0x63, 0x69, 0x6e, 0x67, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x32, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x47, 0x6f, 0x20, 0x74, 0x6f, 0x20, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x3a, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x70, 0x69, 0x6e, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x73, 0x70, 0x69, 0x6e, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x76, 0x61, 0x74, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x64, 0x6a, 0x75, 0x73, 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x61, 0x64, 0x6a, 0x5f, 0x73, 0x70, 0x69, 0x6e, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x69, 0x6e, 0x70, 0x75, 0x74, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x69, 0x6e, 0x70, 0x75, 0x74, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6f, 0x75, 0x74, 0x70, 0x75, 0x74, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x6f, 0x75, 0x74, 0x70, 0x75, 0x74, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x2d, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x5f, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x73, 0x65, 0x63, 0x6f, 0x6e, 0x64, 0x73, 0x5f, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x3e, 0x73, 0x65, 0x63, 0x6f, 0x6e, 0x64, 0x73, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x2d, 0x77, 0x69, 0x64, 0x67, 0x65, 0x74, 0x73, 0x3e, 0x3c, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x2d, 0x77, 0x69, 0x64, 0x67, 0x65, 0x74, 0x20, 0x72, 0x65, 0x73, 0x70, 0x6f, 0x6e, 0x73, 0x65, 0x3d, 0x22, 0x2d, 0x36, 0x22, 0x3e, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x31, 0x3c, 0x2f, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x2d, 0x77, 0x69, 0x64, 0x67, 0x65, 0x74, 0x3e, 0x3c, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x2d, 0x77, 0x69, 0x64, 0x67, 0x65, 0x74, 0x20, 0x72, 0x65, 0x73, 0x70, 0x6f, 0x6e, 0x73, 0x65, 0x3d, 0x22, 0x2d, 0x35, 0x22, 0x3e, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x32, 0x3c, 0x2f, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x2d, 0x77, 0x69, 0x64, 0x67, 0x65, 0x74, 0x3e, 0x3c, 0x2f, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x2d, 0x77, 0x69, 0x64, 0x67, 0x65, 0x74, 0x73, 0x3e, 0x3c, 0x2f, 0x74, 0x65, 0x6d, 0x70, 0x6c, 0x61, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x66, 0x61, 0x63, 0x65, 0x3e, 0x0a, 0x00, 0x00, 0x28, 0x75, 0x75, 0x61, 0x79, 0x29, 0x69, 0x63, 0x6f, 0x6e, 0x73, 0x2f, 0x00, 0x00, 0x0d, 0x00, 0x00, 0x00, 0x67, 0x6b, 0x61, 0x72, 0x73, 0x61, 0x79, 0x2f, 0x02, 0x00, 0x00, 0x00, 0x2f, 0x00, 0x00, 0x00, 0x0a, 0x00, 0x00, 0x00, 0x70, 0x72, 0x65, 0x66, 0x65, 0x72, 0x65, 0x6e, 0x63, 0x65, 0x73, 0x2e, 0x75, 0x69, 0x00, 0x00, 0x34, 0x35, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x3f, 0x78, 0x6d, 0x6c, 0x20, 0x76, 0x65, 0x72, 0x73, 0x69, 0x6f, 0x6e, 0x3d, 0x22, 0x31, 0x2e, 0x30, 0x22, 0x20, 0x65, 0x6e, 0x63, 0x6f, 0x64, 0x69, 0x6e, 0x67, 0x3d, 0x22, 0x55, 0x54, 0x46, 0x2d, 0x38, 0x22, 0x3f, 0x3e, 0x0a, 0x3c, 0x21, 0x2d, 0x2d, 0x20, 0x47, 0x65, 0x6e, 0x65, 0x72, 0x61, 0x74, 0x65, 0x64, 0x20, 0x77, 0x69, 0x74, 0x68, 0x20, 0x67, 0x6c, 0x61, 0x64, 0x65, 0x20, 0x33, 0x2e, 0x31, 0x38, 0x2e, 0x33, 0x20, 0x2d, 0x2d, 0x3e, 0x0a, 0x3c, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x66, 0x61, 0x63, 0x65, 0x3e, 0x3c, 0x72, 0x65, 0x71, 0x75, 0x69, 0x72, 0x65, 0x73, 0x20, 0x6c, 0x69, 0x62, 0x3d, 0x22, 0x67, 0x74, 0x6b, 0x2b, 0x22, 0x20, 0x76, 0x65, 0x72, 0x73, 0x69, 0x6f, 0x6e, 0x3d, 0x22, 0x33, 0x2e, 0x31, 0x30, 0x22, 0x2f, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x41, 0x64, 0x6a, 0x75, 0x73, 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x61, 0x64, 0x6a, 0x5f, 0x62, 0x61, 0x63, 0x6b, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x6f, 0x77, 0x65, 0x72, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x70, 0x70, 0x65, 0x72, 0x22, 0x3e, 0x36, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x22, 0x3e, 0x31, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x74, 0x65, 0x70, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x61, 0x67, 0x65, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x31, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x41, 0x64, 0x6a, 0x75, 0x73, 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x61, 0x64, 0x6a, 0x5f, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x6f, 0x77, 0x65, 0x72, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x70, 0x70, 0x65, 0x72, 0x22, 0x3e, 0x36, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x22, 0x3e, 0x31, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x74, 0x65, 0x70, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x61, 0x67, 0x65, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x31, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x41, 0x64, 0x6a, 0x75, 0x73, 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x61, 0x64, 0x6a, 0x5f, 0x70, 0x61, 0x75, 0x73, 0x65, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x70, 0x70, 0x65, 0x72, 0x22, 0x3e, 0x31, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x22, 0x3e, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x74, 0x65, 0x70, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x61, 0x67, 0x65, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x41, 0x64, 0x6a, 0x75, 0x73, 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x61, 0x64, 0x6a, 0x5f, 0x70, 0x70, 0x73, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x6f, 0x77, 0x65, 0x72, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x70, 0x70, 0x65, 0x72, 0x22, 0x3e, 0x38, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x22, 0x3e, 0x34, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x74, 0x65, 0x70, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x61, 0x67, 0x65, 0x5f, 0x69, 0x6e, 0x63, 0x72, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x74, 0x65, 0x6d, 0x70, 0x6c, 0x61, 0x74, 0x65, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x50, 0x74, 0x50, 0x72, 0x65, 0x66, 0x65, 0x72, 0x65, 0x6e, 0x63, 0x65, 0x73, 0x44, 0x69, 0x61, 0x6c, 0x6f, 0x67, 0x22, 0x20, 0x70, 0x61, 0x72, 0x65, 0x6e, 0x74, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x44, 0x69, 0x61, 0x6c, 0x6f, 0x67, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x65, 0x69, 0x67, 0x68, 0x74, 0x5f, 0x72, 0x65, 0x71, 0x75, 0x65, 0x73, 0x74, 0x22, 0x3e, 0x32, 0x30, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x62, 0x6f, 0x72, 0x64, 0x65, 0x72, 0x5f, 0x77, 0x69, 0x64, 0x74, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x50, 0x61, 0x72, 0x6c, 0x61, 0x74, 0x79, 0x70, 0x65, 0x20, 0x50, 0x72, 0x65, 0x66, 0x65, 0x72, 0x65, 0x6e, 0x63, 0x65, 0x73, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x77, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x5f, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x63, 0x65, 0x6e, 0x74, 0x65, 0x72, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x79, 0x70, 0x65, 0x5f, 0x68, 0x69, 0x6e, 0x74, 0x22, 0x3e, 0x64, 0x69, 0x61, 0x6c, 0x6f, 0x67, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x20, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x6e, 0x61, 0x6c, 0x2d, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3d, 0x22, 0x76, 0x62, 0x6f, 0x78, 0x22, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x6f, 0x78, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x64, 0x69, 0x61, 0x6c, 0x6f, 0x67, 0x2d, 0x76, 0x62, 0x6f, 0x78, 0x31, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6f, 0x72, 0x69, 0x65, 0x6e, 0x74, 0x61, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x76, 0x65, 0x72, 0x74, 0x69, 0x63, 0x61, 0x6c, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x62, 0x6f, 0x72, 0x64, 0x65, 0x72, 0x5f, 0x77, 0x69, 0x64, 0x74, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x20, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x6e, 0x61, 0x6c, 0x2d, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x5f, 0x61, 0x72, 0x65, 0x61, 0x22, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x42, 0x6f, 0x78, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x64, 0x69, 0x61, 0x6c, 0x6f, 0x67, 0x2d, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x5f, 0x61, 0x72, 0x65, 0x61, 0x31, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x79, 0x6f, 0x75, 0x74, 0x5f, 0x73, 0x74, 0x79, 0x6c, 0x65, 0x22, 0x3e, 0x65, 0x6e, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x70, 0x6c, 0x61, 0x63, 0x65, 0x68, 0x6f, 0x6c, 0x64, 0x65, 0x72, 0x2f, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4e, 0x6f, 0x74, 0x65, 0x62, 0x6f, 0x6f, 0x6b, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x74, 0x65, 0x62, 0x6f, 0x6f, 0x6b, 0x31, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x68, 0x6f, 0x77, 0x5f, 0x62, 0x6f, 0x72, 0x64, 0x65, 0x72, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x47, 0x72, 0x69, 0x64, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x67, 0x72, 0x69, 0x64, 0x33, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6d, 0x61, 0x72, 0x67, 0x69, 0x6e, 0x5f, 0x74, 0x6f, 0x70, 0x22, 0x3e, 0x31, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6d, 0x61, 0x72, 0x67, 0x69, 0x6e, 0x5f, 0x62, 0x6f, 0x74, 0x74, 0x6f, 0x6d, 0x22, 0x3e, 0x31, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x62, 0x6f, 0x72, 0x64, 0x65, 0x72, 0x5f, 0x77, 0x69, 0x64, 0x74, 0x68, 0x22, 0x3e, 0x31, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x6f, 0x77, 0x5f, 0x73, 0x70, 0x61, 0x63, 0x69, 0x6e, 0x67, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x6f, 0x6c, 0x75, 0x6d, 0x6e, 0x5f, 0x73, 0x70, 0x61, 0x63, 0x69, 0x6e, 0x67, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x39, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6d, 0x61, 0x72, 0x67, 0x69, 0x6e, 0x5f, 0x6c, 0x65, 0x66, 0x74, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x78, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x5f, 0x50, 0x69, 0x78, 0x65, 0x6c, 0x73, 0x20, 0x70, 0x65, 0x72, 0x20, 0x73, 0x65, 0x63, 0x6f, 0x6e, 0x64, 0x3a, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x75, 0x6e, 0x64, 0x65, 0x72, 0x6c, 0x69, 0x6e, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6d, 0x6e, 0x65, 0x6d, 0x6f, 0x6e, 0x69, 0x63, 0x5f, 0x77, 0x69, 0x64, 0x67, 0x65, 0x74, 0x22, 0x3e, 0x70, 0x70, 0x73, 0x5f, 0x73, 0x63, 0x61, 0x6c, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x63, 0x61, 0x6c, 0x65, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x70, 0x70, 0x73, 0x5f, 0x73, 0x63, 0x61, 0x6c, 0x65, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x64, 0x6a, 0x75, 0x73, 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x61, 0x64, 0x6a, 0x5f, 0x70, 0x70, 0x73, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x73, 0x74, 0x72, 0x69, 0x63, 0x74, 0x5f, 0x74, 0x6f, 0x5f, 0x66, 0x69, 0x6c, 0x6c, 0x5f, 0x6c, 0x65, 0x76, 0x65, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x5f, 0x6c, 0x65, 0x76, 0x65, 0x6c, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x6f, 0x75, 0x6e, 0x64, 0x5f, 0x64, 0x69, 0x67, 0x69, 0x74, 0x73, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x64, 0x69, 0x67, 0x69, 0x74, 0x73, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x5f, 0x70, 0x6f, 0x73, 0x22, 0x3e, 0x72, 0x69, 0x67, 0x68, 0x74, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x6f, 0x72, 0x6d, 0x61, 0x74, 0x2d, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x66, 0x6f, 0x72, 0x6d, 0x61, 0x74, 0x5f, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x43, 0x68, 0x65, 0x63, 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x72, 0x75, 0x6c, 0x65, 0x72, 0x5f, 0x63, 0x68, 0x65, 0x63, 0x6b, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x53, 0x68, 0x6f, 0x77, 0x20, 0x5f, 0x74, 0x69, 0x6d, 0x65, 0x20, 0x73, 0x63, 0x61, 0x6c, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6d, 0x61, 0x72, 0x67, 0x69, 0x6e, 0x5f, 0x6c, 0x65, 0x66, 0x74, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x75, 0x6e, 0x64, 0x65, 0x72, 0x6c, 0x69, 0x6e, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x78, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x64, 0x72, 0x61, 0x77, 0x5f, 0x69, 0x6e, 0x64, 0x69, 0x63, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x35, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x33, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x78, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x20, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x73, 0x3d, 0x22, 0x52, 0x65, 0x73, 0x6f, 0x6c, 0x75, 0x74, 0x69, 0x6f, 0x6e, 0x20, 0x6f, 0x66, 0x20, 0x74, 0x68, 0x65, 0x20, 0x77, 0x61, 0x76, 0x65, 0x66, 0x6f, 0x72, 0x6d, 0x20, 0x69, 0x6d, 0x61, 0x67, 0x65, 0x22, 0x3e, 0x52, 0x65, 0x73, 0x6f, 0x6c, 0x75, 0x74, 0x69, 0x6f, 0x6e, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x73, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x77, 0x65, 0x69, 0x67, 0x68, 0x74, 0x22, 0x20, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x3d, 0x22, 0x62, 0x6f, 0x6c, 0x64, 0x22, 0x2f, 0x3e, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x73, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x34, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x78, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x20, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x73, 0x3d, 0x22, 0x41, 0x20, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x20, 0x69, 0x6e, 0x20, 0x70, 0x72, 0x65, 0x66, 0x65, 0x72, 0x65, 0x6e, 0x63, 0x65, 0x73, 0x2c, 0x20, 0x68, 0x6f, 0x77, 0x20, 0x74, 0x6f, 0x20, 0x64, 0x69, 0x73, 0x70, 0x6c, 0x61, 0x79, 0x20, 0x74, 0x68, 0x65, 0x20, 0x77, 0x61, 0x76, 0x65, 0x66, 0x6f, 0x72, 0x6d, 0x2e, 0x22, 0x3e, 0x44, 0x69, 0x73, 0x70, 0x6c, 0x61, 0x79, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x73, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x77, 0x65, 0x69, 0x67, 0x68, 0x74, 0x22, 0x20, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x3d, 0x22, 0x62, 0x6f, 0x6c, 0x64, 0x22, 0x2f, 0x3e, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x73, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x52, 0x61, 0x64, 0x69, 0x6f, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6d, 0x6f, 0x76, 0x69, 0x6e, 0x67, 0x5f, 0x63, 0x75, 0x72, 0x73, 0x6f, 0x72, 0x5f, 0x72, 0x61, 0x64, 0x69, 0x6f, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x5f, 0x4d, 0x6f, 0x76, 0x69, 0x6e, 0x67, 0x20, 0x63, 0x75, 0x72, 0x73, 0x6f, 0x72, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6d, 0x61, 0x72, 0x67, 0x69, 0x6e, 0x5f, 0x6c, 0x65, 0x66, 0x74, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x75, 0x6e, 0x64, 0x65, 0x72, 0x6c, 0x69, 0x6e, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x78, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x76, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x64, 0x72, 0x61, 0x77, 0x5f, 0x69, 0x6e, 0x64, 0x69, 0x63, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x34, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x52, 0x61, 0x64, 0x69, 0x6f, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x66, 0x69, 0x78, 0x65, 0x64, 0x5f, 0x63, 0x75, 0x72, 0x73, 0x6f, 0x72, 0x5f, 0x72, 0x61, 0x64, 0x69, 0x6f, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x5f, 0x46, 0x69, 0x78, 0x65, 0x64, 0x20, 0x63, 0x75, 0x72, 0x73, 0x6f, 0x72, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6d, 0x61, 0x72, 0x67, 0x69, 0x6e, 0x5f, 0x6c, 0x65, 0x66, 0x74, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x75, 0x6e, 0x64, 0x65, 0x72, 0x6c, 0x69, 0x6e, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x78, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x76, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x64, 0x72, 0x61, 0x77, 0x5f, 0x69, 0x6e, 0x64, 0x69, 0x63, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x67, 0x72, 0x6f, 0x75, 0x70, 0x22, 0x3e, 0x6d, 0x6f, 0x76, 0x69, 0x6e, 0x67, 0x5f, 0x63, 0x75, 0x72, 0x73, 0x6f, 0x72, 0x5f, 0x72, 0x61, 0x64, 0x69, 0x6f, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x33, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x70, 0x6c, 0x61, 0x63, 0x65, 0x68, 0x6f, 0x6c, 0x64, 0x65, 0x72, 0x2f, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x70, 0x6c, 0x61, 0x63, 0x65, 0x68, 0x6f, 0x6c, 0x64, 0x65, 0x72, 0x2f, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x70, 0x6c, 0x61, 0x63, 0x65, 0x68, 0x6f, 0x6c, 0x64, 0x65, 0x72, 0x2f, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x70, 0x6c, 0x61, 0x63, 0x65, 0x68, 0x6f, 0x6c, 0x64, 0x65, 0x72, 0x2f, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x70, 0x6c, 0x61, 0x63, 0x65, 0x68, 0x6f, 0x6c, 0x64, 0x65, 0x72, 0x2f, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x20, 0x74, 0x79, 0x70, 0x65, 0x3d, 0x22, 0x74, 0x61, 0x62, 0x22, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x32, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x57, 0x61, 0x76, 0x65, 0x66, 0x6f, 0x72, 0x6d, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x61, 0x62, 0x5f, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x47, 0x72, 0x69, 0x64, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x67, 0x72, 0x69, 0x64, 0x31, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6d, 0x61, 0x72, 0x67, 0x69, 0x6e, 0x5f, 0x74, 0x6f, 0x70, 0x22, 0x3e, 0x31, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6d, 0x61, 0x72, 0x67, 0x69, 0x6e, 0x5f, 0x62, 0x6f, 0x74, 0x74, 0x6f, 0x6d, 0x22, 0x3e, 0x31, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x62, 0x6f, 0x72, 0x64, 0x65, 0x72, 0x5f, 0x77, 0x69, 0x64, 0x74, 0x68, 0x22, 0x3e, 0x31, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6f, 0x72, 0x69, 0x65, 0x6e, 0x74, 0x61, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x76, 0x65, 0x72, 0x74, 0x69, 0x63, 0x61, 0x6c, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x6f, 0x77, 0x5f, 0x73, 0x70, 0x61, 0x63, 0x69, 0x6e, 0x67, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x6f, 0x6c, 0x75, 0x6d, 0x6e, 0x5f, 0x73, 0x70, 0x61, 0x63, 0x69, 0x6e, 0x67, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x31, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x78, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x4a, 0x75, 0x6d, 0x70, 0x20, 0x62, 0x61, 0x63, 0x6b, 0x20, 0x6f, 0x6e, 0x20, 0x5f, 0x70, 0x61, 0x75, 0x73, 0x65, 0x3a, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x75, 0x6e, 0x64, 0x65, 0x72, 0x6c, 0x69, 0x6e, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6d, 0x6e, 0x65, 0x6d, 0x6f, 0x6e, 0x69, 0x63, 0x5f, 0x77, 0x69, 0x64, 0x67, 0x65, 0x74, 0x22, 0x3e, 0x73, 0x70, 0x69, 0x6e, 0x5f, 0x70, 0x61, 0x75, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x70, 0x69, 0x6e, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x73, 0x70, 0x69, 0x6e, 0x5f, 0x70, 0x61, 0x75, 0x73, 0x65, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x64, 0x6a, 0x75, 0x73, 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x61, 0x64, 0x6a, 0x5f, 0x70, 0x61, 0x75, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6e, 0x75, 0x6d, 0x65, 0x72, 0x69, 0x63, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x22, 0x3e, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x2d, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x73, 0x70, 0x69, 0x6e, 0x5f, 0x70, 0x61, 0x75, 0x73, 0x65, 0x5f, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x5f, 0x70, 0x61, 0x75, 0x73, 0x65, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x78, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x3e, 0x73, 0x65, 0x63, 0x6f, 0x6e, 0x64, 0x73, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x5f, 0x62, 0x61, 0x63, 0x6b, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x78, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x3e, 0x73, 0x65, 0x63, 0x6f, 0x6e, 0x64, 0x73, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x5f, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x78, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x3e, 0x73, 0x65, 0x63, 0x6f, 0x6e, 0x64, 0x73, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x70, 0x69, 0x6e, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x73, 0x70, 0x69, 0x6e, 0x5f, 0x62, 0x61, 0x63, 0x6b, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x64, 0x6a, 0x75, 0x73, 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x61, 0x64, 0x6a, 0x5f, 0x62, 0x61, 0x63, 0x6b, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6e, 0x75, 0x6d, 0x65, 0x72, 0x69, 0x63, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x22, 0x3e, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x2d, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x73, 0x70, 0x69, 0x6e, 0x5f, 0x62, 0x61, 0x63, 0x6b, 0x5f, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x53, 0x70, 0x69, 0x6e, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x73, 0x70, 0x69, 0x6e, 0x5f, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x64, 0x6a, 0x75, 0x73, 0x74, 0x6d, 0x65, 0x6e, 0x74, 0x22, 0x3e, 0x61, 0x64, 0x6a, 0x5f, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6e, 0x75, 0x6d, 0x65, 0x72, 0x69, 0x63, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x22, 0x3e, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x61, 0x6c, 0x75, 0x65, 0x2d, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x73, 0x70, 0x69, 0x6e, 0x5f, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x5f, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x35, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x78, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x4a, 0x75, 0x6d, 0x70, 0x20, 0x5f, 0x62, 0x61, 0x63, 0x6b, 0x3a, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x75, 0x6e, 0x64, 0x65, 0x72, 0x6c, 0x69, 0x6e, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6d, 0x6e, 0x65, 0x6d, 0x6f, 0x6e, 0x69, 0x63, 0x5f, 0x77, 0x69, 0x64, 0x67, 0x65, 0x74, 0x22, 0x3e, 0x73, 0x70, 0x69, 0x6e, 0x5f, 0x62, 0x61, 0x63, 0x6b, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x36, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x78, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x4a, 0x75, 0x6d, 0x70, 0x20, 0x5f, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x3a, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x75, 0x6e, 0x64, 0x65, 0x72, 0x6c, 0x69, 0x6e, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6d, 0x6e, 0x65, 0x6d, 0x6f, 0x6e, 0x69, 0x63, 0x5f, 0x77, 0x69, 0x64, 0x67, 0x65, 0x74, 0x22, 0x3e, 0x73, 0x70, 0x69, 0x6e, 0x5f, 0x66, 0x6f, 0x72, 0x77, 0x61, 0x72, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x20, 0x74, 0x79, 0x70, 0x65, 0x3d, 0x22, 0x74, 0x61, 0x62, 0x22, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x37, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x43, 0x6f, 0x6e, 0x74, 0x72, 0x6f, 0x6c, 0x73, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x61, 0x62, 0x5f, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x47, 0x72, 0x69, 0x64, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x67, 0x72, 0x69, 0x64, 0x32, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6d, 0x61, 0x72, 0x67, 0x69, 0x6e, 0x5f, 0x74, 0x6f, 0x70, 0x22, 0x3e, 0x31, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6d, 0x61, 0x72, 0x67, 0x69, 0x6e, 0x5f, 0x62, 0x6f, 0x74, 0x74, 0x6f, 0x6d, 0x22, 0x3e, 0x31, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x62, 0x6f, 0x72, 0x64, 0x65, 0x72, 0x5f, 0x77, 0x69, 0x64, 0x74, 0x68, 0x22, 0x3e, 0x31, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x6f, 0x77, 0x5f, 0x73, 0x70, 0x61, 0x63, 0x69, 0x6e, 0x67, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x6f, 0x6c, 0x75, 0x6d, 0x6e, 0x5f, 0x73, 0x70, 0x61, 0x63, 0x69, 0x6e, 0x67, 0x22, 0x3e, 0x36, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x43, 0x68, 0x65, 0x63, 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x73, 0x69, 0x7a, 0x65, 0x5f, 0x63, 0x68, 0x65, 0x63, 0x6b, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x52, 0x65, 0x6d, 0x65, 0x6d, 0x62, 0x65, 0x72, 0x20, 0x5f, 0x73, 0x69, 0x7a, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x75, 0x6e, 0x64, 0x65, 0x72, 0x6c, 0x69, 0x6e, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x78, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x64, 0x72, 0x61, 0x77, 0x5f, 0x69, 0x6e, 0x64, 0x69, 0x63, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x43, 0x68, 0x65, 0x63, 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x5f, 0x63, 0x68, 0x65, 0x63, 0x6b, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x52, 0x65, 0x6d, 0x65, 0x6d, 0x62, 0x65, 0x72, 0x20, 0x5f, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x75, 0x6e, 0x64, 0x65, 0x72, 0x6c, 0x69, 0x6e, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x78, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x64, 0x72, 0x61, 0x77, 0x5f, 0x69, 0x6e, 0x64, 0x69, 0x63, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x31, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x43, 0x68, 0x65, 0x63, 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x63, 0x68, 0x65, 0x63, 0x6b, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x53, 0x74, 0x61, 0x72, 0x74, 0x20, 0x6f, 0x6e, 0x20, 0x5f, 0x74, 0x6f, 0x70, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x75, 0x6e, 0x64, 0x65, 0x72, 0x6c, 0x69, 0x6e, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x78, 0x61, 0x6c, 0x69, 0x67, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x64, 0x72, 0x61, 0x77, 0x5f, 0x69, 0x6e, 0x64, 0x69, 0x63, 0x61, 0x74, 0x6f, 0x72, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x65, 0x66, 0x74, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x70, 0x5f, 0x61, 0x74, 0x74, 0x61, 0x63, 0x68, 0x22, 0x3e, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x20, 0x74, 0x79, 0x70, 0x65, 0x3d, 0x22, 0x74, 0x61, 0x62, 0x22, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x38, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x57, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x32, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x61, 0x62, 0x5f, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x66, 0x69, 0x6c, 0x6c, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x6f, 0x73, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x30, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x74, 0x65, 0x6d, 0x70, 0x6c, 0x61, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x66, 0x61, 0x63, 0x65, 0x3e, 0x0a, 0x00, 0x00, 0x28, 0x75, 0x75, 0x61, 0x79, 0x29, 0x6d, 0x65, 0x6e, 0x75, 0x73, 0x2e, 0x75, 0x69, 0x00, 0x00, 0x00, 0x00, 0xe6, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x3f, 0x78, 0x6d, 0x6c, 0x20, 0x76, 0x65, 0x72, 0x73, 0x69, 0x6f, 0x6e, 0x3d, 0x22, 0x31, 0x2e, 0x30, 0x22, 0x3f, 0x3e, 0x0a, 0x3c, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x66, 0x61, 0x63, 0x65, 0x3e, 0x3c, 0x21, 0x2d, 0x2d, 0x20, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x66, 0x61, 0x63, 0x65, 0x2d, 0x72, 0x65, 0x71, 0x75, 0x69, 0x72, 0x65, 0x73, 0x20, 0x67, 0x74, 0x6b, 0x2b, 0x20, 0x33, 0x2e, 0x30, 0x20, 0x2d, 0x2d, 0x3e, 0x3c, 0x6d, 0x65, 0x6e, 0x75, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x61, 0x70, 0x70, 0x6d, 0x65, 0x6e, 0x75, 0x22, 0x3e, 0x3c, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x4f, 0x70, 0x65, 0x6e, 0x20, 0x46, 0x69, 0x6c, 0x65, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x6f, 0x70, 0x65, 0x6e, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x52, 0x65, 0x63, 0x65, 0x6e, 0x74, 0x20, 0x46, 0x69, 0x6c, 0x65, 0x73, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x72, 0x65, 0x63, 0x65, 0x6e, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x2f, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x50, 0x72, 0x65, 0x66, 0x65, 0x72, 0x65, 0x6e, 0x63, 0x65, 0x73, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x70, 0x72, 0x65, 0x66, 0x73, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x2f, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x5f, 0x4b, 0x65, 0x79, 0x62, 0x6f, 0x61, 0x72, 0x64, 0x20, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x77, 0x69, 0x6e, 0x2e, 0x73, 0x68, 0x6f, 0x77, 0x2d, 0x68, 0x65, 0x6c, 0x70, 0x2d, 0x6f, 0x76, 0x65, 0x72, 0x6c, 0x61, 0x79, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x48, 0x65, 0x6c, 0x70, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x68, 0x65, 0x6c, 0x70, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x49, 0x6e, 0x66, 0x6f, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x61, 0x62, 0x6f, 0x75, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x51, 0x75, 0x69, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x71, 0x75, 0x69, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x2f, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x2f, 0x6d, 0x65, 0x6e, 0x75, 0x3e, 0x3c, 0x6d, 0x65, 0x6e, 0x75, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x61, 0x70, 0x70, 0x6d, 0x65, 0x6e, 0x75, 0x2d, 0x70, 0x72, 0x65, 0x2d, 0x33, 0x2d, 0x32, 0x30, 0x22, 0x3e, 0x3c, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x4f, 0x70, 0x65, 0x6e, 0x20, 0x46, 0x69, 0x6c, 0x65, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x6f, 0x70, 0x65, 0x6e, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x52, 0x65, 0x63, 0x65, 0x6e, 0x74, 0x20, 0x46, 0x69, 0x6c, 0x65, 0x73, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x72, 0x65, 0x63, 0x65, 0x6e, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x2f, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x50, 0x72, 0x65, 0x66, 0x65, 0x72, 0x65, 0x6e, 0x63, 0x65, 0x73, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x70, 0x72, 0x65, 0x66, 0x73, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x2f, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x48, 0x65, 0x6c, 0x70, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x68, 0x65, 0x6c, 0x70, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x49, 0x6e, 0x66, 0x6f, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x61, 0x62, 0x6f, 0x75, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x51, 0x75, 0x69, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x71, 0x75, 0x69, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x2f, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x2f, 0x6d, 0x65, 0x6e, 0x75, 0x3e, 0x3c, 0x6d, 0x65, 0x6e, 0x75, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x77, 0x69, 0x6e, 0x6d, 0x65, 0x6e, 0x75, 0x22, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x43, 0x6f, 0x70, 0x79, 0x20, 0x74, 0x69, 0x6d, 0x65, 0x73, 0x74, 0x61, 0x6d, 0x70, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x77, 0x69, 0x6e, 0x2e, 0x63, 0x6f, 0x70, 0x79, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x49, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x74, 0x69, 0x6d, 0x65, 0x73, 0x74, 0x61, 0x6d, 0x70, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x77, 0x69, 0x6e, 0x2e, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x47, 0x6f, 0x20, 0x74, 0x6f, 0x20, 0x2e, 0x2e, 0x2e, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x77, 0x69, 0x6e, 0x2e, 0x67, 0x6f, 0x74, 0x6f, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x2f, 0x6d, 0x65, 0x6e, 0x75, 0x3e, 0x3c, 0x6d, 0x65, 0x6e, 0x75, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x61, 0x6c, 0x74, 0x65, 0x72, 0x6e, 0x61, 0x74, 0x69, 0x76, 0x65, 0x2d, 0x6d, 0x65, 0x6e, 0x75, 0x22, 0x3e, 0x3c, 0x73, 0x75, 0x62, 0x6d, 0x65, 0x6e, 0x75, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x5f, 0x46, 0x69, 0x6c, 0x65, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x69, 0x64, 0x22, 0x3e, 0x66, 0x69, 0x6c, 0x65, 0x2d, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x4f, 0x70, 0x65, 0x6e, 0x20, 0x46, 0x69, 0x6c, 0x65, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x6f, 0x70, 0x65, 0x6e, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x52, 0x65, 0x63, 0x65, 0x6e, 0x74, 0x20, 0x46, 0x69, 0x6c, 0x65, 0x73, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x72, 0x65, 0x63, 0x65, 0x6e, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x51, 0x75, 0x69, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x71, 0x75, 0x69, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x2f, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x2f, 0x73, 0x75, 0x62, 0x6d, 0x65, 0x6e, 0x75, 0x3e, 0x3c, 0x73, 0x75, 0x62, 0x6d, 0x65, 0x6e, 0x75, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x5f, 0x45, 0x64, 0x69, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x69, 0x64, 0x22, 0x3e, 0x65, 0x64, 0x69, 0x74, 0x2d, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x43, 0x6f, 0x70, 0x79, 0x20, 0x74, 0x69, 0x6d, 0x65, 0x73, 0x74, 0x61, 0x6d, 0x70, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x77, 0x69, 0x6e, 0x2e, 0x63, 0x6f, 0x70, 0x79, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x49, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x74, 0x69, 0x6d, 0x65, 0x73, 0x74, 0x61, 0x6d, 0x70, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x77, 0x69, 0x6e, 0x2e, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x47, 0x6f, 0x20, 0x74, 0x6f, 0x20, 0x2e, 0x2e, 0x2e, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x77, 0x69, 0x6e, 0x2e, 0x67, 0x6f, 0x74, 0x6f, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x50, 0x72, 0x65, 0x66, 0x65, 0x72, 0x65, 0x6e, 0x63, 0x65, 0x73, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x70, 0x72, 0x65, 0x66, 0x73, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x2f, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x2f, 0x73, 0x75, 0x62, 0x6d, 0x65, 0x6e, 0x75, 0x3e, 0x3c, 0x73, 0x75, 0x62, 0x6d, 0x65, 0x6e, 0x75, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x5f, 0x48, 0x65, 0x6c, 0x70, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x2f, 0x3e, 0x3c, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x69, 0x64, 0x22, 0x3e, 0x68, 0x65, 0x6c, 0x70, 0x2d, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x5f, 0x4b, 0x65, 0x79, 0x62, 0x6f, 0x61, 0x72, 0x64, 0x20, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x63, 0x75, 0x74, 0x73, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x77, 0x69, 0x6e, 0x2e, 0x73, 0x68, 0x6f, 0x77, 0x2d, 0x68, 0x65, 0x6c, 0x70, 0x2d, 0x6f, 0x76, 0x65, 0x72, 0x6c, 0x61, 0x79, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x48, 0x65, 0x6c, 0x70, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x68, 0x65, 0x6c, 0x70, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x49, 0x6e, 0x66, 0x6f, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x61, 0x62, 0x6f, 0x75, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x2f, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x2f, 0x73, 0x75, 0x62, 0x6d, 0x65, 0x6e, 0x75, 0x3e, 0x3c, 0x2f, 0x6d, 0x65, 0x6e, 0x75, 0x3e, 0x3c, 0x6d, 0x65, 0x6e, 0x75, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x61, 0x6c, 0x74, 0x65, 0x72, 0x6e, 0x61, 0x74, 0x69, 0x76, 0x65, 0x2d, 0x6d, 0x65, 0x6e, 0x75, 0x2d, 0x70, 0x72, 0x65, 0x2d, 0x33, 0x2d, 0x32, 0x30, 0x22, 0x3e, 0x3c, 0x73, 0x75, 0x62, 0x6d, 0x65, 0x6e, 0x75, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x5f, 0x46, 0x69, 0x6c, 0x65, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x69, 0x64, 0x22, 0x3e, 0x66, 0x69, 0x6c, 0x65, 0x2d, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x4f, 0x70, 0x65, 0x6e, 0x20, 0x46, 0x69, 0x6c, 0x65, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x6f, 0x70, 0x65, 0x6e, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x52, 0x65, 0x63, 0x65, 0x6e, 0x74, 0x20, 0x46, 0x69, 0x6c, 0x65, 0x73, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x72, 0x65, 0x63, 0x65, 0x6e, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x51, 0x75, 0x69, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x71, 0x75, 0x69, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x2f, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x2f, 0x73, 0x75, 0x62, 0x6d, 0x65, 0x6e, 0x75, 0x3e, 0x3c, 0x73, 0x75, 0x62, 0x6d, 0x65, 0x6e, 0x75, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x5f, 0x45, 0x64, 0x69, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x69, 0x64, 0x22, 0x3e, 0x65, 0x64, 0x69, 0x74, 0x2d, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x43, 0x6f, 0x70, 0x79, 0x20, 0x74, 0x69, 0x6d, 0x65, 0x73, 0x74, 0x61, 0x6d, 0x70, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x77, 0x69, 0x6e, 0x2e, 0x63, 0x6f, 0x70, 0x79, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x49, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x74, 0x69, 0x6d, 0x65, 0x73, 0x74, 0x61, 0x6d, 0x70, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x77, 0x69, 0x6e, 0x2e, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x47, 0x6f, 0x20, 0x74, 0x6f, 0x20, 0x2e, 0x2e, 0x2e, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x77, 0x69, 0x6e, 0x2e, 0x67, 0x6f, 0x74, 0x6f, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x50, 0x72, 0x65, 0x66, 0x65, 0x72, 0x65, 0x6e, 0x63, 0x65, 0x73, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x70, 0x72, 0x65, 0x66, 0x73, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x2f, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x2f, 0x73, 0x75, 0x62, 0x6d, 0x65, 0x6e, 0x75, 0x3e, 0x3c, 0x73, 0x75, 0x62, 0x6d, 0x65, 0x6e, 0x75, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x5f, 0x48, 0x65, 0x6c, 0x70, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x2f, 0x3e, 0x3c, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x69, 0x64, 0x22, 0x3e, 0x68, 0x65, 0x6c, 0x70, 0x2d, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x48, 0x65, 0x6c, 0x70, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x68, 0x65, 0x6c, 0x70, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x49, 0x6e, 0x66, 0x6f, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x61, 0x62, 0x6f, 0x75, 0x74, 0x3c, 0x2f, 0x61, 0x74, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x65, 0x3e, 0x3c, 0x2f, 0x69, 0x74, 0x65, 0x6d, 0x3e, 0x3c, 0x2f, 0x73, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3e, 0x3c, 0x2f, 0x73, 0x75, 0x62, 0x6d, 0x65, 0x6e, 0x75, 0x3e, 0x3c, 0x2f, 0x6d, 0x65, 0x6e, 0x75, 0x3e, 0x3c, 0x2f, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x66, 0x61, 0x63, 0x65, 0x3e, 0x0a, 0x00, 0x00, 0x28, 0x75, 0x75, 0x61, 0x79, 0x29, 0x77, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x2d, 0x68, 0x65, 0x61, 0x64, 0x65, 0x72, 0x62, 0x61, 0x72, 0x2e, 0x75, 0x69, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6d, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x3f, 0x78, 0x6d, 0x6c, 0x20, 0x76, 0x65, 0x72, 0x73, 0x69, 0x6f, 0x6e, 0x3d, 0x22, 0x31, 0x2e, 0x30, 0x22, 0x20, 0x65, 0x6e, 0x63, 0x6f, 0x64, 0x69, 0x6e, 0x67, 0x3d, 0x22, 0x55, 0x54, 0x46, 0x2d, 0x38, 0x22, 0x3f, 0x3e, 0x0a, 0x3c, 0x21, 0x2d, 0x2d, 0x20, 0x47, 0x65, 0x6e, 0x65, 0x72, 0x61, 0x74, 0x65, 0x64, 0x20, 0x77, 0x69, 0x74, 0x68, 0x20, 0x67, 0x6c, 0x61, 0x64, 0x65, 0x20, 0x33, 0x2e, 0x31, 0x36, 0x2e, 0x31, 0x20, 0x2d, 0x2d, 0x3e, 0x0a, 0x3c, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x66, 0x61, 0x63, 0x65, 0x3e, 0x3c, 0x72, 0x65, 0x71, 0x75, 0x69, 0x72, 0x65, 0x73, 0x20, 0x6c, 0x69, 0x62, 0x3d, 0x22, 0x67, 0x74, 0x6b, 0x2b, 0x22, 0x20, 0x76, 0x65, 0x72, 0x73, 0x69, 0x6f, 0x6e, 0x3d, 0x22, 0x33, 0x2e, 0x31, 0x30, 0x22, 0x2f, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x48, 0x65, 0x61, 0x64, 0x65, 0x72, 0x42, 0x61, 0x72, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x68, 0x65, 0x61, 0x64, 0x65, 0x72, 0x62, 0x61, 0x72, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x50, 0x61, 0x72, 0x6c, 0x61, 0x74, 0x79, 0x70, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x68, 0x6f, 0x77, 0x2d, 0x63, 0x6c, 0x6f, 0x73, 0x65, 0x2d, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x21, 0x2d, 0x2d, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x2d, 0x70, 0x72, 0x65, 0x73, 0x73, 0x2d, 0x65, 0x76, 0x65, 0x6e, 0x74, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x68, 0x65, 0x61, 0x64, 0x65, 0x72, 0x62, 0x61, 0x72, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x70, 0x72, 0x65, 0x73, 0x73, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x2d, 0x2d, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x6f, 0x70, 0x65, 0x6e, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x3e, 0x67, 0x74, 0x6b, 0x2d, 0x6f, 0x70, 0x65, 0x6e, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x6f, 0x6c, 0x74, 0x69, 0x70, 0x2d, 0x74, 0x65, 0x78, 0x74, 0x22, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x73, 0x6c, 0x61, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3d, 0x22, 0x79, 0x65, 0x73, 0x22, 0x3e, 0x4f, 0x70, 0x65, 0x6e, 0x20, 0x61, 0x20, 0x66, 0x69, 0x6c, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x73, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x75, 0x6e, 0x64, 0x65, 0x72, 0x6c, 0x69, 0x6e, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x73, 0x74, 0x6f, 0x63, 0x6b, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x5f, 0x6e, 0x61, 0x6d, 0x65, 0x22, 0x3e, 0x61, 0x70, 0x70, 0x2e, 0x6f, 0x70, 0x65, 0x6e, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x74, 0x79, 0x6c, 0x65, 0x3e, 0x3c, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x75, 0x67, 0x67, 0x65, 0x73, 0x74, 0x65, 0x64, 0x2d, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x2f, 0x3e, 0x3c, 0x2f, 0x73, 0x74, 0x79, 0x6c, 0x65, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x61, 0x63, 0x6b, 0x2d, 0x74, 0x79, 0x70, 0x65, 0x22, 0x3e, 0x73, 0x74, 0x61, 0x72, 0x74, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x54, 0x6f, 0x67, 0x67, 0x6c, 0x65, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x70, 0x6c, 0x61, 0x79, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x22, 0x3e, 0x67, 0x74, 0x6b, 0x2d, 0x6d, 0x65, 0x64, 0x69, 0x61, 0x2d, 0x70, 0x6c, 0x61, 0x79, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x46, 0x61, 0x6c, 0x73, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x63, 0x61, 0x6e, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x68, 0x61, 0x73, 0x5f, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x72, 0x65, 0x63, 0x65, 0x69, 0x76, 0x65, 0x73, 0x5f, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x75, 0x6e, 0x64, 0x65, 0x72, 0x6c, 0x69, 0x6e, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x75, 0x73, 0x65, 0x5f, 0x73, 0x74, 0x6f, 0x63, 0x6b, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x61, 0x6c, 0x77, 0x61, 0x79, 0x73, 0x5f, 0x73, 0x68, 0x6f, 0x77, 0x5f, 0x69, 0x6d, 0x61, 0x67, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x74, 0x6f, 0x67, 0x67, 0x6c, 0x65, 0x64, 0x22, 0x20, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x72, 0x3d, 0x22, 0x70, 0x6c, 0x61, 0x79, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x5f, 0x74, 0x6f, 0x67, 0x67, 0x6c, 0x65, 0x64, 0x5f, 0x63, 0x62, 0x22, 0x20, 0x73, 0x77, 0x61, 0x70, 0x70, 0x65, 0x64, 0x3d, 0x22, 0x6e, 0x6f, 0x22, 0x2f, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x61, 0x63, 0x6b, 0x2d, 0x74, 0x79, 0x70, 0x65, 0x22, 0x3e, 0x73, 0x74, 0x61, 0x72, 0x74, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x3d, 0x22, 0x47, 0x74, 0x6b, 0x4d, 0x65, 0x6e, 0x75, 0x42, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x20, 0x69, 0x64, 0x3d, 0x22, 0x6d, 0x65, 0x6e, 0x75, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x22, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x76, 0x69, 0x73, 0x69, 0x62, 0x6c, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x73, 0x65, 0x6e, 0x73, 0x69, 0x74, 0x69, 0x76, 0x65, 0x22, 0x3e, 0x54, 0x72, 0x75, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x64, 0x69, 0x72, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x22, 0x3e, 0x6e, 0x6f, 0x6e, 0x65, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x21, 0x2d, 0x2d, 0x3c, 0x61, 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, 0x6f, 0x72, 0x20, 0x6b, 0x65, 0x79, 0x3d, 0x22, 0x46, 0x31, 0x30, 0x22, 0x20, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x6c, 0x3d, 0x22, 0x63, 0x6c, 0x69, 0x63, 0x6b, 0x65, 0x64, 0x22, 0x2f, 0x3e, 0x2d, 0x2d, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x3d, 0x22, 0x70, 0x61, 0x63, 0x6b, 0x2d, 0x74, 0x79, 0x70, 0x65, 0x22, 0x3e, 0x65, 0x6e, 0x64, 0x3c, 0x2f, 0x70, 0x72, 0x6f, 0x70, 0x65, 0x72, 0x74, 0x79, 0x3e, 0x3c, 0x2f, 0x70, 0x61, 0x63, 0x6b, 0x69, 0x6e, 0x67, 0x3e, 0x3c, 0x2f, 0x63, 0x68, 0x69, 0x6c, 0x64, 0x3e, 0x3c, 0x2f, 0x6f, 0x62, 0x6a, 0x65, 0x63, 0x74, 0x3e, 0x3c, 0x2f, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x66, 0x61, 0x63, 0x65, 0x3e, 0x0a, 0x00, 0x00, 0x28, 0x75, 0x75, 0x61, 0x79, 0x29, 0x63, 0x6f, 0x6d, 0x2f, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00, 0x67, 0x74, 0x6b, 0x2f, 0x01, 0x00, 0x00, 0x00, 0x67, 0x69, 0x74, 0x68, 0x75, 0x62, 0x2f, 0x00, 0x05, 0x00, 0x00, 0x00, 0x63, 0x75, 0x72, 0x73, 0x6f, 0x72, 0x2e, 0x70, 0x6e, 0x67, 0x00, 0x00, 0x62, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x89, 0x50, 0x4e, 0x47, 0x0d, 0x0a, 0x1a, 0x0a, 0x00, 0x00, 0x00, 0x0d, 0x49, 0x48, 0x44, 0x52, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x10, 0x08, 0x06, 0x00, 0x00, 0x00, 0x1f, 0xf3, 0xff, 0x61, 0x00, 0x00, 0x00, 0x06, 0x62, 0x4b, 0x47, 0x44, 0x00, 0xff, 0x00, 0xff, 0x00, 0xff, 0xa0, 0xbd, 0xa7, 0x93, 0x00, 0x00, 0x00, 0x09, 0x70, 0x48, 0x59, 0x73, 0x00, 0x00, 0x0d, 0xd7, 0x00, 0x00, 0x0d, 0xd7, 0x01, 0x42, 0x28, 0x9b, 0x78, 0x00, 0x00, 0x02, 0x02, 0x49, 0x44, 0x41, 0x54, 0x38, 0xcb, 0xd5, 0x93, 0x4d, 0x6b, 0x13, 0x51, 0x14, 0x86, 0xdf, 0x3b, 0xdf, 0x49, 0x70, 0xe1, 0xb6, 0xa6, 0xb5, 0x35, 0x09, 0x2d, 0xa2, 0x58, 0x31, 0x4d, 0x2b, 0x8a, 0x0c, 0xfe, 0x8e, 0xfe, 0x01, 0x77, 0x45, 0x04, 0xc5, 0x4d, 0x48, 0x17, 0xd6, 0xad, 0x4a, 0x2d, 0xe2, 0x46, 0xa8, 0xe8, 0x42, 0x74, 0x21, 0x22, 0x89, 0x24, 0x34, 0x4a, 0x10, 0x6d, 0x13, 0x35, 0x15, 0x5c, 0x68, 0xc5, 0x84, 0xba, 0x36, 0x93, 0xe9, 0xdc, 0xc9, 0xdc, 0x3b, 0x33, 0xf7, 0xba, 0x48, 0xe3, 0x1f, 0xc8, 0xca, 0x77, 0x7d, 0x78, 0xcf, 0x79, 0x1e, 0x38, 0x44, 0x4a, 0x89, 0x71, 0xa2, 0x60, 0xcc, 0x8c, 0x5d, 0xa0, 0x01, 0x40, 0xb5, 0x5e, 0xde, 0x02, 0xd0, 0xd0, 0x60, 0x95, 0x6c, 0xdb, 0x8e, 0x00, 0xa0, 0xf6, 0xf6, 0xcd, 0x77, 0x11, 0xc7, 0x39, 0x45, 0x21, 0x3d, 0x15, 0xd6, 0x84, 0x6d, 0xdb, 0x01, 0x00, 0x52, 0xdd, 0x2a, 0xaf, 0x00, 0x58, 0xd6, 0x88, 0xb5, 0x08, 0x20, 0x1a, 0x5e, 0x20, 0xb0, 0x74, 0x62, 0x3a, 0x7b, 0x3d, 0x26, 0xfc, 0x5b, 0xb5, 0xfa, 0xfa, 0x34, 0x00, 0x48, 0x21, 0x26, 0x2f, 0x5d, 0xbc, 0x0c, 0x55, 0xd1, 0x93, 0x80, 0x63, 0x55, 0xea, 0x95, 0x6c, 0xad, 0x5e, 0x69, 0xe5, 0x32, 0xb3, 0x6b, 0x52, 0xca, 0xf9, 0xe1, 0x72, 0x67, 0x88, 0x10, 0xb0, 0x01, 0x8e, 0x4d, 0x4c, 0xea, 0xf9, 0xb3, 0x85, 0x9c, 0x6e, 0x9a, 0xdb, 0xaf, 0xca, 0x2f, 0x8b, 0x51, 0x18, 0x41, 0x88, 0x18, 0x8c, 0x0f, 0xe0, 0x0e, 0x70, 0xc5, 0x50, 0x94, 0x76, 0x21, 0x7f, 0x7e, 0x3e, 0x9d, 0x9e, 0x32, 0x19, 0x63, 0x12, 0xe8, 0xc0, 0x19, 0x39, 0xf0, 0xfd, 0x01, 0xe1, 0x9c, 0xc1, 0x71, 0x7b, 0x58, 0xc8, 0x2f, 0x59, 0x99, 0x99, 0xec, 0x4d, 0xc6, 0x03, 0x53, 0x53, 0x75, 0x1c, 0xb8, 0x9e, 0x71, 0x3c, 0x3d, 0x55, 0x5c, 0x5c, 0xb8, 0x90, 0x94, 0x52, 0x10, 0x48, 0x09, 0x4a, 0x29, 0x3a, 0x1d, 0x00, 0xce, 0xa1, 0x03, 0xef, 0xc0, 0x33, 0x08, 0x21, 0xd0, 0x54, 0x15, 0x8c, 0x33, 0xcc, 0xe6, 0xe6, 0x8c, 0x30, 0x0c, 0x21, 0x44, 0x8c, 0xe9, 0x99, 0x0c, 0x39, 0x39, 0x77, 0xca, 0xa4, 0xbe, 0x07, 0xcb, 0x4a, 0x42, 0x55, 0x35, 0x50, 0xea, 0x43, 0x81, 0x0e, 0x67, 0x84, 0xe0, 0xfb, 0x3e, 0x27, 0x44, 0x81, 0x65, 0x25, 0x90, 0x4c, 0xa4, 0xb0, 0xfb, 0xb5, 0xcd, 0xdb, 0xbb, 0x9f, 0xa5, 0x10, 0x02, 0xad, 0xe6, 0x47, 0xd9, 0xfc, 0xb4, 0xc3, 0x92, 0x89, 0x14, 0x2c, 0xd3, 0xc2, 0x70, 0x9e, 0x02, 0xe8, 0x02, 0xce, 0x21, 0x02, 0xa5, 0x54, 0x1a, 0xba, 0x0e, 0x55, 0xd1, 0xf0, 0xe4, 0xe9, 0x66, 0x50, 0xad, 0x55, 0x6e, 0x71, 0xc6, 0x99, 0x10, 0x12, 0xaa, 0xa6, 0xf3, 0xf7, 0x8d, 0x77, 0xa5, 0xcd, 0xc7, 0x8f, 0x7c, 0xd7, 0xed, 0x4b, 0x00, 0xf0, 0xa9, 0x8f, 0x6e, 0x17, 0xf8, 0x27, 0x91, 0x52, 0x8a, 0x66, 0x6b, 0x27, 0x5c, 0x5f, 0xbf, 0xfb, 0xe3, 0xd7, 0xcf, 0xbd, 0xc2, 0xb5, 0xab, 0x37, 0x4a, 0x8c, 0x33, 0x48, 0x19, 0x83, 0x33, 0x0e, 0x55, 0x4d, 0x6c, 0xfc, 0xde, 0xef, 0x9c, 0xb9, 0x77, 0xff, 0xce, 0x97, 0x66, 0x73, 0x9b, 0x79, 0x9e, 0x47, 0x00, 0xc0, 0x19, 0x39, 0x08, 0x18, 0xff, 0xf0, 0xfc, 0xc5, 0xb3, 0xc6, 0x91, 0xd4, 0xd1, 0xd2, 0xea, 0xea, 0xed, 0x08, 0x00, 0xa2, 0x30, 0xda, 0x7f, 0xf0, 0x70, 0x23, 0xa7, 0x28, 0x8a, 0xef, 0xf6, 0xfd, 0xa0, 0x58, 0x5c, 0xdb, 0x23, 0x84, 0x9c, 0xeb, 0xfd, 0x71, 0x56, 0x34, 0x5d, 0x5d, 0x4e, 0x18, 0x66, 0xd4, 0xef, 0xf7, 0x41, 0xfe, 0xff, 0x5f, 0x18, 0xbb, 0xe0, 0x2f, 0x05, 0xf3, 0xf8, 0x5e, 0xfa, 0x83, 0x3d, 0x04, 0x00, 0x00, 0x00, 0x00, 0x49, 0x45, 0x4e, 0x44, 0xae, 0x42, 0x60, 0x82, 0x00, 0x00, 0x28, 0x75, 0x75, 0x61, 0x79, 0x29, 0x70, 0x61, 0x72, 0x6c, 0x61, 0x74, 0x79, 0x70, 0x65, 0x2e, 0x63, 0x73, 0x73, 0x00, 0x2b, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x2f, 0x2a, 0x20, 0x63, 0x75, 0x73, 0x74, 0x6f, 0x6d, 0x20, 0x73, 0x74, 0x79, 0x6c, 0x65, 0x73, 0x20, 0x66, 0x6f, 0x72, 0x20, 0x50, 0x74, 0x57, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x20, 0x2a, 0x2f, 0x0a, 0x0a, 0x2f, 0x2a, 0x20, 0x6d, 0x61, 0x6b, 0x65, 0x20, 0x67, 0x6f, 0x74, 0x6f, 0x20, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x20, 0x73, 0x6d, 0x61, 0x6c, 0x6c, 0x65, 0x72, 0x20, 0x2a, 0x2f, 0x0a, 0x23, 0x67, 0x6f, 0x74, 0x6f, 0x5f, 0x63, 0x75, 0x72, 0x73, 0x6f, 0x72, 0x5f, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x20, 0x7b, 0x0a, 0x09, 0x70, 0x61, 0x64, 0x64, 0x69, 0x6e, 0x67, 0x3a, 0x20, 0x32, 0x70, 0x78, 0x3b, 0x0a, 0x7d, 0x0a, 0x0a, 0x23, 0x74, 0x69, 0x6d, 0x65, 0x5f, 0x6c, 0x61, 0x62, 0x65, 0x6c, 0x20, 0x7b, 0x0a, 0x09, 0x2f, 0x2a, 0x20, 0x54, 0x72, 0x69, 0x65, 0x64, 0x20, 0x43, 0x61, 0x6e, 0x74, 0x61, 0x72, 0x65, 0x6c, 0x6c, 0x20, 0x66, 0x69, 0x72, 0x73, 0x74, 0x2c, 0x20, 0x62, 0x75, 0x74, 0x20, 0x64, 0x69, 0x67, 0x69, 0x74, 0x73, 0x20, 0x61, 0x72, 0x65, 0x20, 0x6e, 0x6f, 0x74, 0x20, 0x61, 0x6c, 0x77, 0x61, 0x79, 0x73, 0x20, 0x6d, 0x6f, 0x6e, 0x6f, 0x73, 0x70, 0x61, 0x63, 0x65, 0x3a, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x54, 0x68, 0x65, 0x79, 0x20, 0x61, 0x72, 0x65, 0x20, 0x6f, 0x6e, 0x20, 0x44, 0x65, 0x62, 0x69, 0x61, 0x6e, 0x20, 0x38, 0x2c, 0x20, 0x62, 0x75, 0x74, 0x20, 0x6e, 0x6f, 0x74, 0x20, 0x6f, 0x6e, 0x20, 0x55, 0x62, 0x75, 0x6e, 0x74, 0x75, 0x20, 0x31, 0x36, 0x2e, 0x34, 0x20, 0x2a, 0x2f, 0x0a, 0x09, 0x66, 0x6f, 0x6e, 0x74, 0x2d, 0x66, 0x61, 0x6d, 0x69, 0x6c, 0x79, 0x3a, 0x20, 0x6d, 0x6f, 0x6e, 0x6f, 0x73, 0x70, 0x61, 0x63, 0x65, 0x3b, 0x0a, 0x09, 0x66, 0x6f, 0x6e, 0x74, 0x2d, 0x73, 0x69, 0x7a, 0x65, 0x3a, 0x20, 0x31, 0x35, 0x30, 0x25, 0x3b, 0x0a, 0x09, 0x66, 0x6f, 0x6e, 0x74, 0x2d, 0x77, 0x65, 0x69, 0x67, 0x68, 0x74, 0x3a, 0x20, 0x36, 0x30, 0x30, 0x3b, 0x0a, 0x7d, 0x0a, 0x00, 0x00, 0x28, 0x75, 0x75, 0x61, 0x79, 0x29 } }; static GStaticResource static_resource = { parlatype_resource_data.data, sizeof (parlatype_resource_data.data), NULL, NULL, NULL }; extern GResource *parlatype_get_resource (void); GResource *parlatype_get_resource (void) { return g_static_resource_get_resource (&static_resource); } /* If G_HAS_CONSTRUCTORS is true then the compiler support *both* constructors and destructors, in a sane way, including e.g. on library unload. If not you're on your own. Some compilers need #pragma to handle this, which does not work with macros, so the way you need to use this is (for constructors): #ifdef G_DEFINE_CONSTRUCTOR_NEEDS_PRAGMA #pragma G_DEFINE_CONSTRUCTOR_PRAGMA_ARGS(my_constructor) #endif G_DEFINE_CONSTRUCTOR(my_constructor) static void my_constructor(void) { ... } */ #if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 7) #define G_HAS_CONSTRUCTORS 1 #define G_DEFINE_CONSTRUCTOR(_func) static void __attribute__((constructor)) _func (void); #define G_DEFINE_DESTRUCTOR(_func) static void __attribute__((destructor)) _func (void); #elif defined (_MSC_VER) && (_MSC_VER >= 1500) /* Visual studio 2008 and later has _Pragma */ #define G_HAS_CONSTRUCTORS 1 #define G_DEFINE_CONSTRUCTOR(_func) \ static void _func(void); \ static int _func ## _wrapper(void) { _func(); return 0; } \ __pragma(section(".CRT$XCU",read)) \ __declspec(allocate(".CRT$XCU")) static int (* _array ## _func)(void) = _func ## _wrapper; #define G_DEFINE_DESTRUCTOR(_func) \ static void _func(void); \ static int _func ## _constructor(void) { atexit (_func); return 0; } \ __pragma(section(".CRT$XCU",read)) \ __declspec(allocate(".CRT$XCU")) static int (* _array ## _func)(void) = _func ## _constructor; #elif defined (_MSC_VER) #define G_HAS_CONSTRUCTORS 1 /* Pre Visual studio 2008 must use #pragma section */ #define G_DEFINE_CONSTRUCTOR_NEEDS_PRAGMA 1 #define G_DEFINE_DESTRUCTOR_NEEDS_PRAGMA 1 #define G_DEFINE_CONSTRUCTOR_PRAGMA_ARGS(_func) \ section(".CRT$XCU",read) #define G_DEFINE_CONSTRUCTOR(_func) \ static void _func(void); \ static int _func ## _wrapper(void) { _func(); return 0; } \ __declspec(allocate(".CRT$XCU")) static int (*p)(void) = _func ## _wrapper; #define G_DEFINE_DESTRUCTOR_PRAGMA_ARGS(_func) \ section(".CRT$XCU",read) #define G_DEFINE_DESTRUCTOR(_func) \ static void _func(void); \ static int _func ## _constructor(void) { atexit (_func); return 0; } \ __declspec(allocate(".CRT$XCU")) static int (* _array ## _func)(void) = _func ## _constructor; #elif defined(__SUNPRO_C) /* This is not tested, but i believe it should work, based on: * http://opensource.apple.com/source/OpenSSL098/OpenSSL098-35/src/fips/fips_premain.c */ #define G_HAS_CONSTRUCTORS 1 #define G_DEFINE_CONSTRUCTOR_NEEDS_PRAGMA 1 #define G_DEFINE_DESTRUCTOR_NEEDS_PRAGMA 1 #define G_DEFINE_CONSTRUCTOR_PRAGMA_ARGS(_func) \ init(_func) #define G_DEFINE_CONSTRUCTOR(_func) \ static void _func(void); #define G_DEFINE_DESTRUCTOR_PRAGMA_ARGS(_func) \ fini(_func) #define G_DEFINE_DESTRUCTOR(_func) \ static void _func(void); #else /* constructors not supported for this compiler */ #endif #ifdef G_HAS_CONSTRUCTORS #ifdef G_DEFINE_CONSTRUCTOR_NEEDS_PRAGMA #pragma G_DEFINE_CONSTRUCTOR_PRAGMA_ARGS(resource_constructor) #endif G_DEFINE_CONSTRUCTOR(resource_constructor) #ifdef G_DEFINE_DESTRUCTOR_NEEDS_PRAGMA #pragma G_DEFINE_DESTRUCTOR_PRAGMA_ARGS(resource_destructor) #endif G_DEFINE_DESTRUCTOR(resource_destructor) #else #warning "Constructor not supported on this compiler, linking in resources will not work" #endif static void resource_constructor (void) { g_static_resource_init (&static_resource); } static void resource_destructor (void) { g_static_resource_fini (&static_resource); } parlatype-1.5.4/src/pt-app.c0000644000175000017500000003130013176574165012613 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #include "config.h" #include /* exit() */ #include #include #include "pt-app.h" #include "pt-window.h" #include "pt-preferences.h" struct _PtApp { GtkApplication parent; }; struct _PtAppClass { GtkApplicationClass parent_class; }; G_DEFINE_TYPE (PtApp, pt_app, GTK_TYPE_APPLICATION); static gboolean G_GNUC_NORETURN option_version_cb (const gchar *option_name, const gchar *value, gpointer data, GError **error) { g_print ("%s %s\n", PACKAGE, VERSION); exit (0); } static GOptionEntry options[] = { { "version", 'v', G_OPTION_FLAG_NO_ARG, G_OPTION_ARG_CALLBACK, option_version_cb, N_("Show the application's version"), NULL }, { NULL } }; static void recent_cb (GSimpleAction *action, GVariant *parameter, gpointer app) { GtkWidget *dialog; GtkWindow *win; GtkRecentInfo *info = NULL; GtkRecentFilter *filter; GtkRecentFilter *filter_all; const gchar *uri = NULL; win = gtk_application_get_active_window (app); dialog = gtk_recent_chooser_dialog_new ( _("Recent Files"), win, _("_Cancel"), GTK_RESPONSE_CANCEL, _("_Open"), GTK_RESPONSE_ACCEPT, NULL); gtk_recent_chooser_set_sort_type (GTK_RECENT_CHOOSER (dialog), GTK_RECENT_SORT_MRU); /* Most Recently Used first */ gtk_recent_chooser_set_show_icons (GTK_RECENT_CHOOSER (dialog), TRUE); filter = gtk_recent_filter_new (); gtk_recent_filter_set_name (filter, _("Parlatype")); gtk_recent_filter_add_application (filter, "parlatype"); gtk_recent_filter_add_mime_type (filter, "audio/*"); gtk_recent_chooser_add_filter (GTK_RECENT_CHOOSER (dialog), filter); filter_all = gtk_recent_filter_new (); gtk_recent_filter_set_name (filter_all, _("All files")); gtk_recent_filter_add_pattern (filter_all, "*"); gtk_recent_chooser_add_filter (GTK_RECENT_CHOOSER (dialog), filter_all); gtk_recent_chooser_set_filter (GTK_RECENT_CHOOSER (dialog), filter); if (gtk_dialog_run (GTK_DIALOG (dialog)) == GTK_RESPONSE_ACCEPT) { info = gtk_recent_chooser_get_current_item (GTK_RECENT_CHOOSER (dialog)); if (info) uri = gtk_recent_info_get_uri (info); } gtk_widget_destroy (dialog); if (uri) { /* GStreamer has problems with uris from recent chooser, as a workaround use GFile magic */ GFile *file = g_file_new_for_uri (uri); gchar *tmp = g_file_get_uri (file); pt_window_open_file (PT_WINDOW (win), tmp); g_free (tmp); g_object_unref (file); gtk_recent_info_unref (info); } } static void open_cb (GSimpleAction *action, GVariant *parameter, gpointer app) { GtkWidget *dialog; GtkWindow *win; const char *home_path; GFile *home; GtkFileFilter *filter_audio; GtkFileFilter *filter_all; gchar *uri = NULL; win = gtk_application_get_active_window (app); dialog = gtk_file_chooser_dialog_new ( _("Open Audio File"), win, GTK_FILE_CHOOSER_ACTION_OPEN, _("_Cancel"), GTK_RESPONSE_CANCEL, _("_Open"), GTK_RESPONSE_ACCEPT, NULL); /* Set current folder to user's home directory */ home_path = g_get_home_dir (); home = g_file_new_for_path (home_path); gtk_file_chooser_set_current_folder_file (GTK_FILE_CHOOSER (dialog), home, NULL); filter_audio = gtk_file_filter_new (); filter_all = gtk_file_filter_new (); gtk_file_filter_set_name (filter_audio, _("Audio files")); gtk_file_filter_set_name (filter_all, _("All files")); gtk_file_filter_add_mime_type (filter_audio, "audio/*"); gtk_file_filter_add_pattern (filter_all, "*"); gtk_file_chooser_add_filter (GTK_FILE_CHOOSER (dialog), filter_audio); gtk_file_chooser_add_filter (GTK_FILE_CHOOSER (dialog), filter_all); gtk_file_chooser_set_filter (GTK_FILE_CHOOSER (dialog), filter_audio); if (gtk_dialog_run (GTK_DIALOG (dialog)) == GTK_RESPONSE_ACCEPT) { uri = gtk_file_chooser_get_uri (GTK_FILE_CHOOSER (dialog)); } g_object_unref (home); gtk_widget_destroy (dialog); if (uri) { pt_window_open_file (PT_WINDOW (win), uri); g_free (uri); } } static void prefs_cb (GSimpleAction *action, GVariant *parameter, gpointer app) { GtkWindow *win; win = gtk_application_get_active_window (app); pt_show_preferences_dialog (win); } static void help_cb (GSimpleAction *action, GVariant *parameter, gpointer app) { GtkWindow *win; win = gtk_application_get_active_window (app); GError *error = NULL; gchar *errmsg; #if GTK_CHECK_VERSION(3,22,0) gtk_show_uri_on_window ( win, "help:com.github.gkarsay.parlatype", GDK_CURRENT_TIME, &error); #else gtk_show_uri (gtk_widget_get_screen (GTK_WIDGET (win)), "help:com.github.gkarsay.parlatype", GDK_CURRENT_TIME, &error); #endif if (error) { /* Translators: %s is a detailed error message */ errmsg = g_strdup_printf (_("Error opening help: %s"), error->message); pt_error_message (PT_WINDOW (win), errmsg); g_free (errmsg); g_error_free (error); } } static void about_cb (GSimpleAction *action, GVariant *parameter, gpointer app) { const gchar *authors[] = { "Gabor Karsay ", /* Translators: This is part of the about box, followed by the copyright holders of code from other projects. Instead of "including" it could also say "with" or just "Code from other projects:" */ _("Including code from other projects:"), "Buzztrax team ", "Philip Withnall ", "Magnus Hjorth, mhWaveEdit", NULL }; const gchar *artists[] = { "GNOME Project http://www.gnome.org", "Gabor Karsay ", NULL }; gtk_show_about_dialog ( gtk_application_get_active_window (app), "program_name", _("Parlatype"), "version", PACKAGE_VERSION, "copyright", "© Gabor Karsay 2016–2017", "comments", _("A basic transcription utility"), "logo-icon-name", "com.github.gkarsay.parlatype", "authors", authors, "artists", artists, "translator-credits", _("translator-credits"), "license-type", GTK_LICENSE_GPL_3_0, "website", PACKAGE_URL, NULL); } static void quit_cb (GSimpleAction *action, GVariant *parameter, gpointer app) { g_application_quit (app); } const GActionEntry app_actions[] = { { "open", open_cb, NULL, NULL, NULL }, { "recent", recent_cb, NULL, NULL, NULL }, { "prefs", prefs_cb, NULL, NULL, NULL }, { "help", help_cb, NULL, NULL, NULL }, { "about", about_cb, NULL, NULL, NULL }, { "quit", quit_cb, NULL, NULL, NULL } }; static void pt_app_startup (GApplication *app) { GtkBuilder *builder; GMenuModel *app_menu; GMenuModel *menubar; #if GLIB_CHECK_VERSION(2,42,0) g_application_set_resource_base_path (app, "/com/github/gkarsay/parlatype"); #endif G_APPLICATION_CLASS (pt_app_parent_class)->startup (app); g_action_map_add_action_entries (G_ACTION_MAP (app), app_actions, G_N_ELEMENTS (app_actions), app); #if GTK_CHECK_VERSION(3,12,0) const gchar *quit_accels[2] = { "Q", NULL }; const gchar *open_accels[2] = { "O", NULL }; const gchar *copy_accels[2] = { "C", NULL }; const gchar *insert_accels[2] = { "V", NULL }; const gchar *goto_accels[2] = { "G", NULL }; const gchar *recent_accels[2] = { "R", NULL }; const gchar *help_accels[2] = { "F1", NULL }; const gchar *zoom_in_accels[3] = { "plus", "KP_Add", NULL }; const gchar *zoom_out_accels[3] = { "minus", "KP_Subtract", NULL }; gtk_application_set_accels_for_action (GTK_APPLICATION (app), "app.quit", quit_accels); gtk_application_set_accels_for_action (GTK_APPLICATION (app), "app.open", open_accels); gtk_application_set_accels_for_action (GTK_APPLICATION (app), "app.recent", recent_accels); gtk_application_set_accels_for_action (GTK_APPLICATION (app), "win.copy", copy_accels); gtk_application_set_accels_for_action (GTK_APPLICATION (app), "win.insert", insert_accels); gtk_application_set_accels_for_action (GTK_APPLICATION (app), "win.goto", goto_accels); gtk_application_set_accels_for_action (GTK_APPLICATION (app), "app.help", help_accels); gtk_application_set_accels_for_action (GTK_APPLICATION (app), "win.zoom-in", zoom_in_accels); gtk_application_set_accels_for_action (GTK_APPLICATION (app), "win.zoom-out", zoom_out_accels); #else gtk_application_add_accelerator (GTK_APPLICATION (app), "Q", "app.quit", NULL); gtk_application_add_accelerator (GTK_APPLICATION (app), "O", "app.open", NULL); gtk_application_add_accelerator (GTK_APPLICATION (app), "C", "win.copy", NULL); gtk_application_add_accelerator (GTK_APPLICATION (app), "V", "win.insert", NULL); gtk_application_add_accelerator (GTK_APPLICATION (app), "G", "win.goto", NULL); gtk_application_add_accelerator (GTK_APPLICATION (app), "R", "app.recent", NULL); gtk_application_add_accelerator (GTK_APPLICATION (app), "F1", "app.help", NULL); gtk_application_add_accelerator (GTK_APPLICATION (app), "plus", "win.zoom-in", NULL); gtk_application_add_accelerator (GTK_APPLICATION (app), "KP_Add", "win.zoom-in", NULL); gtk_application_add_accelerator (GTK_APPLICATION (app), "minus", "win.zoom-out", NULL); gtk_application_add_accelerator (GTK_APPLICATION (app), "KP_Subtract", "win.zoom-out", NULL); #endif builder = gtk_builder_new_from_resource ("/com/github/gkarsay/parlatype/menus.ui"); #if GTK_CHECK_VERSION(3,14,0) if (gtk_application_prefers_app_menu (GTK_APPLICATION (app))) { #else gboolean show_menubar; g_object_get (gtk_settings_get_default(), "gtk-shell-shows-menubar", &show_menubar, NULL); if (show_menubar) { #endif #if GTK_CHECK_VERSION(3,20,0) app_menu = G_MENU_MODEL (gtk_builder_get_object (builder, "appmenu")); #else app_menu = G_MENU_MODEL (gtk_builder_get_object (builder, "appmenu-pre-3-20")); #endif gtk_application_set_app_menu (GTK_APPLICATION (app), app_menu); } else { #if GTK_CHECK_VERSION(3,20,0) menubar = G_MENU_MODEL (gtk_builder_get_object (builder, "alternative-menu")); #else menubar = G_MENU_MODEL (gtk_builder_get_object (builder, "alternative-menu-pre-3-20")); #endif gtk_application_set_menubar (GTK_APPLICATION (app), menubar); } g_object_unref (builder); /* Load custom css */ GtkCssProvider *provider; GFile *file; file = g_file_new_for_uri ("resource:///com/github/gkarsay/parlatype/parlatype.css"); provider = gtk_css_provider_new (); /* Note: since 3.16 there's also gtk_css_provider_load_from_resource () */ gtk_css_provider_load_from_file (provider, file, NULL); gtk_style_context_add_provider_for_screen ( gdk_screen_get_default (), GTK_STYLE_PROVIDER (provider), GTK_STYLE_PROVIDER_PRIORITY_APPLICATION); g_object_unref (provider); g_object_unref (file); } static void pt_app_activate (GApplication *app) { GList *windows; PtWindow *win; windows = gtk_application_get_windows (GTK_APPLICATION (app)); if (windows) win = PT_WINDOW (windows->data); else win = pt_window_new (PT_APP (app)); gtk_window_present (GTK_WINDOW (win)); } static void pt_app_open (GApplication *app, GFile **files, gint n_files, const gchar *hint) { GtkWindow *win; gchar *uri; pt_app_activate (app); win = gtk_application_get_active_window (GTK_APPLICATION (app)); if (n_files > 1) { g_print (_("Warning: Parlatype handles only one file at a time. The other files are ignored.\n")); } uri = g_file_get_uri (files[0]); pt_window_open_file (PT_WINDOW (win), uri); g_free (uri); } static void pt_app_class_init (PtAppClass *class) { G_APPLICATION_CLASS (class)->open = pt_app_open; G_APPLICATION_CLASS (class)->activate = pt_app_activate; G_APPLICATION_CLASS (class)->startup = pt_app_startup; } static void pt_app_init (PtApp *app) { g_application_add_main_option_entries (G_APPLICATION (app), options); } PtApp * pt_app_new (void) { return g_object_new (PT_APP_TYPE, "application-id", "com.github.gkarsay.parlatype", "flags", G_APPLICATION_HANDLES_OPEN, NULL); } parlatype-1.5.4/src/pt-window.c0000644000175000017500000006441113176574165013353 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #include "config.h" #include #include #include #include #include #include #include "pt-app.h" #include "pt-dbus-service.h" #include "pt-goto-dialog.h" #include "pt-mediakeys.h" #include "pt-window.h" #include "pt-window-dnd.h" #include "pt-window-private.h" enum { PROP_0, PROP_PAUSE, PROP_BACK, PROP_FORWARD, N_PROPERTIES }; static GParamSpec *obj_properties[N_PROPERTIES] = { NULL, }; G_DEFINE_TYPE_WITH_PRIVATE (PtWindow, pt_window, GTK_TYPE_APPLICATION_WINDOW) void pt_error_message (PtWindow *parent, const gchar *message) { GtkWidget *dialog; dialog = gtk_message_dialog_new ( GTK_WINDOW (parent), GTK_DIALOG_MODAL | GTK_DIALOG_DESTROY_WITH_PARENT, GTK_MESSAGE_ERROR, GTK_BUTTONS_OK, "%s", message); gtk_dialog_run (GTK_DIALOG (dialog)); gtk_widget_destroy (dialog); } void copy_timestamp (GSimpleAction *action, GVariant *parameter, gpointer user_data) { PtWindow *win; win = PT_WINDOW (user_data); GtkClipboard *clip; const gchar *timestamp = NULL; timestamp = pt_player_get_timestamp (win->priv->player); if (timestamp) { clip = gtk_clipboard_get (GDK_SELECTION_CLIPBOARD); gtk_clipboard_set_text (clip, timestamp, -1); } } static void clip_text_cb (GtkClipboard *clip, const gchar *text, gpointer data) { PtPlayer *player = (PtPlayer *) data; gchar *timestamp; if (text) { timestamp = g_strdup (text); pt_player_goto_timestamp (player, timestamp); g_free (timestamp); } } void insert_timestamp (GSimpleAction *action, GVariant *parameter, gpointer user_data) { PtWindow *win; win = PT_WINDOW (user_data); GtkClipboard *clip; clip = gtk_clipboard_get (GDK_SELECTION_CLIPBOARD); gtk_clipboard_request_text (clip, clip_text_cb, win->priv->player); } void goto_position (GSimpleAction *action, GVariant *parameter, gpointer user_data) { PtWindow *win; win = PT_WINDOW (user_data); PtGotoDialog *dlg; gint pos; dlg = pt_goto_dialog_new (GTK_WINDOW (win)); pt_goto_dialog_set_pos (dlg, pt_player_get_position (win->priv->player) / 1000); pt_goto_dialog_set_max (dlg, pt_player_get_duration (win->priv->player) / 1000); if (gtk_dialog_run (GTK_DIALOG (dlg)) == GTK_RESPONSE_OK) { pos = pt_goto_dialog_get_pos (dlg); pt_player_jump_to_position (win->priv->player, pos * 1000); } gtk_widget_destroy (GTK_WIDGET (dlg)); } static void set_zoom (GSettings *editor, gint step) { gint pps; pps = g_settings_get_int (editor, "pps"); if ((step > 0 && pps >= 200) || (step < 0 && pps <= 25)) return; g_settings_set_int (editor, "pps", CLAMP (pps + step, 25, 200)); } void zoom_in (GSimpleAction *action, GVariant *parameter, gpointer user_data) { PtWindow *win = PT_WINDOW (user_data); set_zoom (win->priv->editor, 25); } void zoom_out (GSimpleAction *action, GVariant *parameter, gpointer user_data) { PtWindow *win = PT_WINDOW (user_data); set_zoom (win->priv->editor, -25); } const GActionEntry win_actions[] = { { "copy", copy_timestamp, NULL, NULL, NULL }, { "insert", insert_timestamp, NULL, NULL, NULL }, { "goto", goto_position, NULL, NULL, NULL }, { "zoom-in", zoom_in, NULL, NULL, NULL }, { "zoom-out", zoom_out, NULL, NULL, NULL } }; static void update_time (PtWindow *win) { gchar *text; text = pt_player_get_current_time_string (win->priv->player, PT_PRECISION_SECOND_10TH); if (text == NULL) return; gtk_label_set_text (GTK_LABEL (win->priv->pos_label), text); g_free (text); g_object_set (win->priv->waveviewer, "playback-cursor", pt_player_get_position (win->priv->player), NULL); } static gboolean update_time_tick (GtkWidget *widget, GdkFrameClock *frame_clock, gpointer data) { PtWindow *win = (PtWindow *) data; update_time (win); return G_SOURCE_CONTINUE; } void cursor_changed_cb (GtkWidget *widget, gint64 pos, PtWindow *win) { /* triggered only by user */ pt_player_jump_to_position (win->priv->player, pos); update_time (win); pt_waveviewer_set_follow_cursor (PT_WAVEVIEWER (win->priv->waveviewer), TRUE); } void selection_changed_cb (GtkWidget *widget, PtWindow *win) { gint64 start, end, current; if (win->priv->playing_selection) { current = pt_player_get_position (win->priv->player); g_object_get (win->priv->waveviewer, "selection-start", &start, "selection-end", &end, NULL); if (start <= current && current <= end) { pt_player_set_selection (win->priv->player, start, end); } else { pt_player_clear_selection (win->priv->player); win->priv->playing_selection = FALSE; } } } void play_toggled_cb (GtkWidget *widget, PtWindow *win) { gtk_toggle_button_set_active ( GTK_TOGGLE_BUTTON (win->priv->button_play), !gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (win->priv->button_play))); } static void add_timer (PtWindow *win) { if (win->priv->timer == 0) { win->priv->timer = gtk_widget_add_tick_callback ( win->priv->waveviewer, update_time_tick, win, NULL); } } static void remove_timer (PtWindow *win) { if (win->priv->timer > 0) { gtk_widget_remove_tick_callback (win->priv->waveviewer, win->priv->timer); win->priv->timer = 0; } } static void change_jump_back_tooltip (PtWindow *win) { gchar *back; back = g_strdup_printf ( ngettext ("Jump back 1 second", "Jump back %d seconds", win->priv->back), win->priv->back); gtk_widget_set_tooltip_text (win->priv->button_jump_back, back); g_free (back); } static void change_jump_forward_tooltip (PtWindow *win) { gchar *forward; forward = g_strdup_printf ( ngettext ("Jump forward 1 second", "Jump forward %d seconds", win->priv->forward), win->priv->forward); gtk_widget_set_tooltip_text (win->priv->button_jump_forward, forward); g_free (forward); } static void change_play_button_tooltip (PtWindow *win) { gchar *play; gboolean free_me = FALSE; if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (win->priv->button_play))) { if (win->priv->pause == 0) { play = _("Pause"); } else { play = g_strdup_printf ( ngettext ("Pause and rewind 1 second", "Pause and rewind %d seconds", win->priv->pause), win->priv->pause); free_me = TRUE; } } else { play = _("Start playing"); } gtk_widget_set_tooltip_text (win->priv->button_play, play); if (free_me) g_free (play); } static void enable_win_actions (PtWindow *win, gboolean state) { GAction *action; action = g_action_map_lookup_action (G_ACTION_MAP (win), "copy"); g_simple_action_set_enabled (G_SIMPLE_ACTION (action), state); action = g_action_map_lookup_action (G_ACTION_MAP (win), "insert"); g_simple_action_set_enabled (G_SIMPLE_ACTION (action), state); action = g_action_map_lookup_action (G_ACTION_MAP (win), "goto"); g_simple_action_set_enabled (G_SIMPLE_ACTION (action), state); action = g_action_map_lookup_action (G_ACTION_MAP (win), "zoom-in"); g_simple_action_set_enabled (G_SIMPLE_ACTION (action), state); action = g_action_map_lookup_action (G_ACTION_MAP (win), "zoom-out"); g_simple_action_set_enabled (G_SIMPLE_ACTION (action), state); } static void destroy_progress_dlg (PtWindow *win) { if (win->priv->progress_handler_id > 0) { g_signal_handler_disconnect (win->priv->player, win->priv->progress_handler_id); win->priv->progress_handler_id = 0; } if (win->priv->progress_dlg) { gtk_widget_destroy (win->priv->progress_dlg); } } static void progress_response_cb (GtkWidget *dialog, gint response, PtWindow *win) { if (response == GTK_RESPONSE_CANCEL) pt_player_cancel (win->priv->player); /* This will trigger an error */ } static void show_progress_dlg (PtWindow *win) { if (win->priv->progress_dlg) { /* actually this should never happen */ gtk_window_present (GTK_WINDOW (win->priv->progress_dlg)); return; } win->priv->progress_dlg = GTK_WIDGET (pt_progress_dialog_new (GTK_WINDOW (win))); g_signal_connect (win->priv->progress_dlg, "destroy", G_CALLBACK (gtk_widget_destroyed), &win->priv->progress_dlg); g_signal_connect (win->priv->progress_dlg, "response", G_CALLBACK (progress_response_cb), win); win->priv->progress_handler_id = g_signal_connect_swapped (win->priv->player, "load-progress", G_CALLBACK (pt_progress_dialog_set_progress), PT_PROGRESS_DIALOG (win->priv->progress_dlg)); gtk_widget_show_all (win->priv->progress_dlg); } static void pt_window_ready_to_play (PtWindow *win, gboolean state) { /* Set up widget sensitivity/visibility, actions, labels, window title and timer according to the state of PtPlayer (ready to play or not). Reset tooltips for insensitive widgets. */ gchar *display_name = NULL; enable_win_actions (win, state); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (win->priv->button_play), FALSE); gtk_widget_set_visible (win->priv->button_play, state); gtk_widget_set_visible (win->priv->button_open, !state); gtk_widget_set_sensitive (win->priv->button_play, state); gtk_widget_set_sensitive (win->priv->button_fast_back, state); gtk_widget_set_sensitive (win->priv->button_fast_forward, state); gtk_widget_set_sensitive (win->priv->button_jump_back, state); gtk_widget_set_sensitive (win->priv->button_jump_forward, state); gtk_widget_set_sensitive (win->priv->speed_scale, state); if (state) { destroy_progress_dlg (win); display_name = pt_player_get_filename (win->priv->player); if (display_name) { gtk_window_set_title (GTK_WINDOW (win), display_name); g_free (display_name); } gchar *uri = NULL; uri = pt_player_get_uri (win->priv->player); if (uri) { gtk_recent_manager_add_item (win->priv->recent, uri); g_free (uri); } change_play_button_tooltip (win); change_jump_back_tooltip (win); change_jump_forward_tooltip (win); pt_waveviewer_set_follow_cursor (PT_WAVEVIEWER (win->priv->waveviewer), TRUE); win->priv->wavedata = pt_player_get_data (win->priv->player, g_settings_get_int (win->priv->editor, "pps")); pt_waveviewer_set_wave (PT_WAVEVIEWER (win->priv->waveviewer), win->priv->wavedata); pt_wavedata_free (win->priv->wavedata); /* add timer after waveviewer, didn't update cursor otherwise sometimes */ add_timer (win); } else { gtk_label_set_text (GTK_LABEL (win->priv->pos_label), "00:00.0"); gtk_window_set_title (GTK_WINDOW (win), "Parlatype"); gtk_widget_set_tooltip_text (win->priv->button_jump_back, NULL); gtk_widget_set_tooltip_text (win->priv->button_jump_forward, NULL); remove_timer (win); pt_waveviewer_set_wave (PT_WAVEVIEWER (win->priv->waveviewer), NULL); } } static void player_end_of_stream_cb (PtPlayer *player, PtWindow *win) { /* Don't jump back */ gint temp; temp = win->priv->pause; win->priv->pause = 0; gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (win->priv->button_play), FALSE); win->priv->pause = temp; } static void player_error_cb (PtPlayer *player, GError *error, PtWindow *win) { destroy_progress_dlg (win); pt_window_ready_to_play (win, FALSE); pt_error_message (win, error->message); } static void open_cb (PtPlayer *player, GAsyncResult *res, gpointer *data) { PtWindow *win = (PtWindow *) data; GError *error = NULL; destroy_progress_dlg (win); if (!pt_player_open_uri_finish (player, res, &error)) { pt_error_message (win, error->message); g_error_free (error); return; } pt_window_ready_to_play (win, TRUE); } void pt_window_open_file (PtWindow *win, gchar *uri) { show_progress_dlg (win); pt_window_ready_to_play (win, FALSE); pt_player_open_uri_async (win->priv->player, uri, (GAsyncReadyCallback) open_cb, win); } void play_button_toggled_cb (GtkToggleButton *button, PtWindow *win) { gint64 start, end, current, dur; gboolean selection; if (gtk_toggle_button_get_active (button)) { /* If there is a selection, play it */ g_object_get (win->priv->waveviewer, "selection-start", &start, "selection-end", &end, "has-selection", &selection, NULL); if (!win->priv->playing_selection && selection) { /* Note: changes position if outside selection */ pt_player_set_selection (win->priv->player, start, end); win->priv->playing_selection = TRUE; } /* If we're at the end of stream or selection goto start */ current = pt_player_get_position (win->priv->player); if (win->priv->playing_selection) { if (current == end) pt_player_jump_to_position (win->priv->player, start); } else { dur = pt_player_get_duration (win->priv->player); /* We are usually not (never?) at the exact duration */ if (dur - current < 100) pt_player_jump_to_position (win->priv->player, 0); } /* before following cursor update time, not to jump back and forth */ update_time (win); pt_waveviewer_set_follow_cursor (PT_WAVEVIEWER (win->priv->waveviewer), TRUE); pt_player_play (win->priv->player); } else { pt_player_pause (win->priv->player); pt_player_jump_relative (win->priv->player, win->priv->pause * -1000); } change_play_button_tooltip (win); } void jump_back_button_clicked_cb (GtkButton *button, PtWindow *win) { pt_player_jump_relative (win->priv->player, win->priv->back * -1000); } void jump_forward_button_clicked_cb (GtkButton *button, PtWindow *win) { pt_player_jump_relative (win->priv->player, win->priv->forward * 1000); } /* currently not used */ gboolean fast_back_button_pressed_cb (GtkButton *button, GdkEvent *event, PtWindow *win) { pt_player_rewind (win->priv->player, 2.0); return FALSE; } /* currently not used */ gboolean fast_back_button_released_cb (GtkButton *button, GdkEvent *event, PtWindow *win) { pt_player_set_speed (win->priv->player, win->priv->speed); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (win->priv->button_play))) { pt_player_play (win->priv->player); } else { pt_player_pause (win->priv->player); } return FALSE; } /* currently not used */ gboolean fast_forward_button_pressed_cb (GtkButton *button, GdkEvent *event, PtWindow *win) { pt_player_fast_forward (win->priv->player, 2.0); return FALSE; } /* currently not used */ gboolean fast_forward_button_released_cb (GtkButton *button, GdkEvent *event, PtWindow *win) { pt_player_set_speed (win->priv->player, win->priv->speed); if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (win->priv->button_play))) { pt_player_play (win->priv->player); } else { pt_player_pause (win->priv->player); } return FALSE; } void speed_changed_cb (GtkRange *range, PtWindow *win) { win->priv->speed = gtk_range_get_value (range); pt_player_set_speed (win->priv->player, win->priv->speed); } void speed_scale_direction_changed_cb (GtkWidget *widget, GtkTextDirection previous_direction, gpointer data) { if (gtk_widget_get_direction (widget) == GTK_TEXT_DIR_RTL) gtk_scale_set_value_pos (GTK_SCALE (widget), GTK_POS_LEFT); else gtk_scale_set_value_pos (GTK_SCALE (widget), GTK_POS_RIGHT); } static void settings_changed_cb (GSettings *settings, gchar *key, PtWindow *win) { if (g_strcmp0 (key, "rewind-on-pause") == 0) { change_play_button_tooltip (win); return; } if (g_strcmp0 (key, "jump-back") == 0) { change_jump_back_tooltip (win); return; } if (g_strcmp0 (key, "jump-forward") == 0) { change_jump_forward_tooltip (win); return; } if (g_strcmp0 (key, "pps") == 0) { gchar *uri; uri = pt_player_get_uri (win->priv->player); if (uri) { win->priv->wavedata = pt_player_get_data (win->priv->player, g_settings_get_int (win->priv->editor, "pps")); pt_waveviewer_set_wave (PT_WAVEVIEWER (win->priv->waveviewer), win->priv->wavedata); pt_wavedata_free (win->priv->wavedata); g_free (uri); } return; } } static void setup_settings (PtWindow *win) { win->priv->editor = g_settings_new ("com.github.gkarsay.parlatype"); g_settings_bind ( win->priv->editor, "rewind-on-pause", win, "pause", G_SETTINGS_BIND_GET); g_settings_bind ( win->priv->editor, "jump-back", win, "back", G_SETTINGS_BIND_GET); g_settings_bind ( win->priv->editor, "jump-forward", win, "forward", G_SETTINGS_BIND_GET); g_settings_bind ( win->priv->editor, "show-ruler", win->priv->waveviewer, "show-ruler", G_SETTINGS_BIND_GET); g_settings_bind ( win->priv->editor, "fixed-cursor", win->priv->waveviewer, "fixed-cursor", G_SETTINGS_BIND_GET); /* connect to tooltip changer */ g_signal_connect ( win->priv->editor, "changed", G_CALLBACK (settings_changed_cb), win); /* Default speed Other solutions would be - Automatically save last known speed in GSettings - Add a default speed option to preferences dialog - Save last known speed in metadata for each file */ win->priv->speed = 1.0; /* Set size on both X11 and Wayland */ if (g_settings_get_boolean (win->priv->editor, "remember-size")) { gtk_window_resize (GTK_WINDOW (win), g_settings_get_int (win->priv->editor, "width"), g_settings_get_int (win->priv->editor, "height")); } /* The following would fail silently on Wayland, we make it conditional anyway */ #ifdef GDK_WINDOWING_X11 GdkDisplay *display; display = gdk_display_get_default (); if (GDK_IS_X11_DISPLAY (display)) { if (g_settings_get_boolean (win->priv->editor, "start-on-top")) { gtk_window_set_keep_above (GTK_WINDOW (win), TRUE); } if (g_settings_get_boolean (win->priv->editor, "remember-position")) { gtk_window_move (GTK_WINDOW (win), g_settings_get_int (win->priv->editor, "x-pos"), g_settings_get_int (win->priv->editor, "y-pos")); } } #endif } static void setup_player (PtWindow *win) { /* Already tested in main.c, we don't check for errors here anymore */ win->priv->player = pt_player_new (NULL); g_signal_connect (win->priv->player, "end-of-stream", G_CALLBACK (player_end_of_stream_cb), win); g_signal_connect (win->priv->player, "error", G_CALLBACK (player_error_cb), win); g_object_bind_property ( win->priv->volumebutton, "value", win->priv->player, "volume", G_BINDING_BIDIRECTIONAL | G_BINDING_SYNC_CREATE); } static void setup_accels_actions_headerbar (PtWindow *win) { /* Actions */ g_action_map_add_action_entries (G_ACTION_MAP (win), win_actions, G_N_ELEMENTS (win_actions), win); enable_win_actions (win, FALSE); /* GtkHeader workaround for glade 3.16 + Menu button */ GtkBuilder *builder; GMenuModel *model; GtkWidget *hbar; GtkWidget *menu_button; builder = gtk_builder_new_from_resource ("/com/github/gkarsay/parlatype/window-headerbar.ui"); hbar = GTK_WIDGET (gtk_builder_get_object (builder, "headerbar")); win->priv->button_open = GTK_WIDGET (gtk_builder_get_object (builder, "button_open")); win->priv->button_play = GTK_WIDGET (gtk_builder_get_object (builder, "button_play")); menu_button = GTK_WIDGET (gtk_builder_get_object (builder, "menu_button")); #if GTK_CHECK_VERSION(3,14,0) #else /* In GTK+ 3.10 the new icon doesn't exist, don't know 3.12, works in 3.14 */ GtkWidget *image; image = gtk_image_new_from_icon_name ("emblem-system-symbolic", GTK_ICON_SIZE_MENU); gtk_button_set_image (GTK_BUTTON (menu_button), image); #endif gtk_window_set_titlebar (GTK_WINDOW (win), hbar); gtk_builder_connect_signals (builder, win); g_object_unref (builder); builder = gtk_builder_new_from_resource ("/com/github/gkarsay/parlatype/menus.ui"); model = G_MENU_MODEL (gtk_builder_get_object (builder, "winmenu")); gtk_menu_button_set_menu_model (GTK_MENU_BUTTON (menu_button), model); g_object_unref (builder); /* Accels */ GtkAccelGroup *accels; accels = gtk_accel_group_new (); gtk_window_add_accel_group (GTK_WINDOW (win), accels); gtk_widget_add_accelerator (menu_button, "clicked", accels, GDK_KEY_F10, 0, GTK_ACCEL_VISIBLE); } static void goto_toggled_cb (GtkToggleButton *button, gpointer data) { gchar *tooltip; if (gtk_toggle_button_get_active (button)) tooltip = _("View follows cursor"); else tooltip = _("Click to follow cursor"); gtk_widget_set_tooltip_text (GTK_WIDGET (button), tooltip); } static void setup_goto_button (PtWindow *win) { GtkWidget *image; image = gtk_image_new_from_resource ("/com/github/gkarsay/parlatype/icons/cursor.png"); gtk_button_set_label (GTK_BUTTON (win->priv->goto_button), NULL); gtk_button_set_image (GTK_BUTTON (win->priv->goto_button), image); g_signal_connect (win->priv->goto_button, "toggled", G_CALLBACK (goto_toggled_cb), win); g_object_bind_property ( win->priv->waveviewer, "follow-cursor", win->priv->goto_button, "active", G_BINDING_BIDIRECTIONAL | G_BINDING_SYNC_CREATE); } static void pt_window_init (PtWindow *win) { win->priv = pt_window_get_instance_private (win); gtk_widget_init_template (GTK_WIDGET (win)); setup_settings (win); setup_player (win); setup_accels_actions_headerbar (win); setup_goto_button (win); setup_mediakeys (win); /* this is in pt_mediakeys.c */ pt_window_setup_dnd (win); /* this is in pt_window_dnd.c */ setup_dbus_service (win); /* this is in pt_dbus_service.c */ win->priv->recent = gtk_recent_manager_get_default (); win->priv->timer = 0; win->priv->progress_dlg = NULL; win->priv->progress_handler_id = 0; win->priv->wavedata = NULL; win->priv->playing_selection = FALSE; /* Used e.g. by Xfce */ gtk_window_set_default_icon_name ("com.github.gkarsay.parlatype"); /* Flip speed scale for right to left layouts */ if (gtk_widget_get_default_direction () == GTK_TEXT_DIR_RTL) gtk_scale_set_value_pos (GTK_SCALE (win->priv->speed_scale), GTK_POS_LEFT); pt_window_ready_to_play (win, FALSE); } static void pt_window_dispose (GObject *object) { PtWindow *win; win = PT_WINDOW (object); close_dbus_service (win); /* Save window size/position on all backends */ if (win->priv->editor) { gint x; gint y; gtk_window_get_position (GTK_WINDOW (win), &x, &y); g_settings_set_int (win->priv->editor, "x-pos", x); g_settings_set_int (win->priv->editor, "y-pos", y); gtk_window_get_size (GTK_WINDOW (win), &x, &y); g_settings_set_int (win->priv->editor, "width", x); g_settings_set_int (win->priv->editor, "height", y); } remove_timer (win); g_clear_object (&win->priv->editor); g_clear_object (&win->priv->proxy); destroy_progress_dlg (win); g_clear_object (&win->priv->player); G_OBJECT_CLASS (pt_window_parent_class)->dispose (object); } static void pt_window_set_property (GObject *object, guint property_id, const GValue *value, GParamSpec *pspec) { PtWindow *win; win = PT_WINDOW (object); switch (property_id) { case PROP_PAUSE: win->priv->pause = g_value_get_int (value); break; case PROP_BACK: win->priv->back = g_value_get_int (value); break; case PROP_FORWARD: win->priv->forward = g_value_get_int (value); break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, property_id, pspec); break; } } static void pt_window_get_property (GObject *object, guint property_id, GValue *value, GParamSpec *pspec) { PtWindow *win; win = PT_WINDOW (object); switch (property_id) { case PROP_PAUSE: g_value_set_int (value, win->priv->pause); break; case PROP_BACK: g_value_set_int (value, win->priv->back); break; case PROP_FORWARD: g_value_set_int (value, win->priv->forward); break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, property_id, pspec); break; } } static void pt_window_class_init (PtWindowClass *klass) { GObjectClass *gobject_class = G_OBJECT_CLASS (klass); GtkWidgetClass *widget_class = GTK_WIDGET_CLASS (klass); gobject_class->set_property = pt_window_set_property; gobject_class->get_property = pt_window_get_property; gobject_class->dispose = pt_window_dispose; gtk_widget_class_set_template_from_resource (widget_class, "/com/github/gkarsay/parlatype/window.ui"); gtk_widget_class_bind_template_child_private (widget_class, PtWindow, button_fast_back); // not used gtk_widget_class_bind_template_child_private (widget_class, PtWindow, button_fast_forward); // not used gtk_widget_class_bind_template_child_private (widget_class, PtWindow, button_jump_back); gtk_widget_class_bind_template_child_private (widget_class, PtWindow, button_jump_forward); gtk_widget_class_bind_template_child_private (widget_class, PtWindow, volumebutton); gtk_widget_class_bind_template_child_private (widget_class, PtWindow, pos_label); gtk_widget_class_bind_template_child_private (widget_class, PtWindow, label_box); gtk_widget_class_bind_template_child_private (widget_class, PtWindow, goto_button); gtk_widget_class_bind_template_child_private (widget_class, PtWindow, speed_scale); gtk_widget_class_bind_template_child_private (widget_class, PtWindow, waveviewer); obj_properties[PROP_PAUSE] = g_param_spec_int ( "pause", "Seconds to rewind on pause", "Seconds to rewind on pause", 0, /* minimum */ 10, /* maximum */ 0, G_PARAM_READWRITE); obj_properties[PROP_BACK] = g_param_spec_int ( "back", "Seconds to jump back", "Seconds to jump back", 1, /* minimum */ 60, /* maximum */ 10, G_PARAM_READWRITE); obj_properties[PROP_FORWARD] = g_param_spec_int ( "forward", "Seconds to jump forward", "Seconds to jump forward", 1, /* minimum */ 60, /* maximum */ 10, G_PARAM_READWRITE); g_object_class_install_properties ( gobject_class, N_PROPERTIES, obj_properties); } PtWindow * pt_window_new (PtApp *app) { return g_object_new (PT_WINDOW_TYPE, "application", app, NULL); } parlatype-1.5.4/src/pt-dbus-service.c0000644000175000017500000001264613176574165014442 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #include "config.h" #include #include #include #include "pt-window.h" #include "pt-window-private.h" static GDBusNodeInfo *introspection_data = NULL; /* Introspection data for the service we are exporting */ static const gchar introspection_xml[] = "" " " " " " " " " " " " " " " " " " " " " " " " " " " ""; static void handle_method_call (GDBusConnection *connection, const gchar *sender, const gchar *object_path, const gchar *interface_name, const gchar *method_name, GVariant *parameters, GDBusMethodInvocation *invocation, gpointer user_data) { PtWindow *win; win = PT_WINDOW (user_data); gchar *timestamp = NULL; if (g_strcmp0 (method_name, "GetTimestamp") == 0) { timestamp = pt_player_get_timestamp (win->priv->player); g_debug ("t: %s", timestamp); if (!timestamp) timestamp = ""; g_dbus_method_invocation_return_value (invocation, g_variant_new ("(s)", timestamp)); } else if (g_strcmp0 (method_name, "GotoTimestamp") == 0) { g_variant_get (parameters, "(&s)", ×tamp); pt_player_goto_timestamp (win->priv->player, timestamp); g_dbus_method_invocation_return_value (invocation, NULL); } else if (g_strcmp0 (method_name, "PlayPause") == 0) { gboolean state; state = gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (win->priv->button_play)); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (win->priv->button_play), !state); g_dbus_method_invocation_return_value (invocation, NULL); } else if (g_strcmp0 (method_name, "JumpBack") == 0) { gtk_button_clicked (GTK_BUTTON (win->priv->button_jump_back)); g_dbus_method_invocation_return_value (invocation, NULL); } else if (g_strcmp0 (method_name, "JumpForward") == 0) { gtk_button_clicked (GTK_BUTTON (win->priv->button_jump_forward)); g_dbus_method_invocation_return_value (invocation, NULL); } else if (g_strcmp0 (method_name, "IncreaseSpeed") == 0) { gdouble value; value = gtk_range_get_value (GTK_RANGE (win->priv->speed_scale)); gtk_range_set_value (GTK_RANGE (win->priv->speed_scale), value + 0.1); g_dbus_method_invocation_return_value (invocation, NULL); } else if (g_strcmp0 (method_name, "DecreaseSpeed") == 0) { gdouble value; value = gtk_range_get_value (GTK_RANGE (win->priv->speed_scale)); gtk_range_set_value (GTK_RANGE (win->priv->speed_scale), value - 0.1); g_dbus_method_invocation_return_value (invocation, NULL); } } static const GDBusInterfaceVTable interface_vtable = { handle_method_call, }; static void on_bus_acquired (GDBusConnection *connection, const gchar *name, gpointer user_data) { guint registration_id; registration_id = g_dbus_connection_register_object (connection, "/com/github/gkarsay/parlatype", introspection_data->interfaces[0], &interface_vtable, user_data, NULL, /* user_data_free_func */ NULL); /* GError */ g_assert (registration_id > 0); } static void on_name_acquired (GDBusConnection *connection, const gchar *name, gpointer user_data) { } static void on_name_lost (GDBusConnection *connection, const gchar *name, gpointer user_data) { } void setup_dbus_service (PtWindow *win) { introspection_data = g_dbus_node_info_new_for_xml (introspection_xml, NULL); g_assert (introspection_data != NULL); win->priv->owner_id = g_bus_own_name (G_BUS_TYPE_SESSION, "com.github.gkarsay.parlatype", G_BUS_NAME_OWNER_FLAGS_NONE, on_bus_acquired, on_name_acquired, on_name_lost, win, NULL); } void close_dbus_service (PtWindow *win) { if (win->priv->owner_id > 0) { g_bus_unown_name (win->priv->owner_id); g_dbus_node_info_unref (introspection_data); win->priv->owner_id = 0; } } parlatype-1.5.4/src/pt-dbus-service.h0000644000175000017500000000160413171727132014424 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #ifndef PT_DBUS_SERVICE_H #define PT_DBUS_SERVICE_H #include "config.h" #include "pt-window.h" void setup_dbus_service (PtWindow *win); void close_dbus_service (PtWindow *win); #endif parlatype-1.5.4/src/pt-resources.h0000644000175000017500000000022113204122232014020 00000000000000#ifndef __RESOURCE_parlatype_H__ #define __RESOURCE_parlatype_H__ #include extern GResource *parlatype_get_resource (void); #endif parlatype-1.5.4/src/pt-window-dnd.c0000644000175000017500000001576513176574165014126 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #include "config.h" #include #include /* strlen */ #include "pt-window.h" #include "pt-window-private.h" #include "pt-window-dnd.h" static gboolean handle_uri (PtWindow *win, gchar *data) { GFile *file; gchar **split = NULL; gchar *uri; gboolean success = FALSE; if (g_regex_match_simple ("^file:///.*", data, 0, 0)) { /* Nautilus gives us a \r\n separated list */ split = g_strsplit (data, "\r", 0); file = g_file_new_for_uri (split[0]); if (g_file_query_exists (file, NULL)) { pt_window_open_file (win, split[0]); success = TRUE; } g_object_unref (file); g_strfreev (split); return success; } if (g_regex_match_simple ("^/.*/.*", data, 0, 0)) { file = g_file_new_for_path (data); if (g_file_query_exists (file, NULL)) { uri = g_file_get_uri (file); pt_window_open_file (win, uri); g_free (uri); success = TRUE; } g_object_unref (file); return success; } return FALSE; } static gboolean handle_filename (PtWindow *win, gchar *data) { gboolean success; GList *list; GtkRecentInfo *info; gchar *uri; success = FALSE; list = gtk_recent_manager_get_items (win->priv->recent); for (list = g_list_first (list); list; list = g_list_next (list)) { info = (GtkRecentInfo *) list->data; if (g_strcmp0 (gtk_recent_info_get_display_name (info), data) == 0) { uri = g_strdup (gtk_recent_info_get_uri (info)); success = TRUE; break; } } g_list_free_full (list, (GDestroyNotify) gtk_recent_info_unref); if (success) { /* GStreamer has problems with uris from recent chooser, as a workaround use GFile magic */ GFile *file = g_file_new_for_uri (uri); gchar *tmp = g_file_get_uri (file); pt_window_open_file (PT_WINDOW (win), tmp); g_free (tmp); g_free (uri); g_object_unref (file); } return success; } static gboolean handle_dnd_data (PtWindow *win, gchar *data) { g_debug ("Received drag and drop: '%s'", data); if (pt_player_goto_timestamp (win->priv->player, data)) return TRUE; if (handle_uri (win, data)) return TRUE; if (handle_filename (win, data)) return TRUE; return FALSE; } static gboolean win_dnd_drop_cb (GtkWidget *widget, GdkDragContext *context, gint x, gint y, guint time, gpointer user_data) { gboolean is_valid_drop_site; GdkAtom target_type; GList *iterate; gboolean have_target; /* Check to see if (x,y) is a valid drop site within widget */ is_valid_drop_site = TRUE; have_target = FALSE; /* Choose the best target type */ iterate = gdk_drag_context_list_targets (context); while (iterate != NULL) { g_debug ("atom string: %s", gdk_atom_name (iterate->data)); if (iterate->data == gdk_atom_intern ("STRING", TRUE)) { target_type = gdk_atom_intern ("STRING", TRUE); have_target = TRUE; break; } if (iterate->data == gdk_atom_intern ("UTF8_STRING", TRUE)) { target_type = gdk_atom_intern ("UTF8_STRING", TRUE); have_target = TRUE; break; } iterate = g_list_next (iterate); } if (have_target) { /* Request the data from the source. */ gtk_drag_get_data (widget, /* will receive 'drag-data-received' signal */ context, /* represents the current state of the DnD */ target_type, time); } else { /* No target offered by source => error */ is_valid_drop_site = FALSE; } return is_valid_drop_site; } static void win_dnd_received_cb (GtkWidget *widget, GdkDragContext *context, int x, int y, GtkSelectionData *seldata, guint info, guint time, gpointer user_data) { PtWindow *win = user_data; gchar *data; gboolean success; if ((seldata == NULL) || (gtk_selection_data_get_length (seldata) == 0) || (info != TARGET_STRING && info != TARGET_UTF8_STRING)) { gtk_drag_finish (context, FALSE, /* success */ FALSE, /* delete source */ time); return; } data = (gchar*) gtk_selection_data_get_data (seldata); success = handle_dnd_data (win, data); gtk_drag_finish (context, success, FALSE, /* delete source */ time); } static gboolean win_dnd_motion_cb (GtkWidget *widget, GdkDragContext *context, gint x, gint y, guint info, guint time, gpointer user_data) { /* We handle this signal ourselves, because using GTK_DEST_DEFAULT_MOTION drags with source LibreOffice show an icon indicating drag is not possible. */ GdkAtom target_atom; target_atom = gtk_drag_dest_find_target (widget, context, NULL); if (target_atom != GDK_NONE) { gdk_drag_status (context, GDK_ACTION_COPY, time); return TRUE; } gdk_drag_status (context, 0, time); return FALSE; } static void label_dnd_get_cb (GtkWidget *widget, GdkDragContext *context, GtkSelectionData *data, guint info, guint time, gpointer user_data) { PtWindow *win = user_data; gchar *timestamp = NULL; /* Note: timestamp when drag ended, maybe it would be better to produce the timestamp when drag starts. */ timestamp = pt_player_get_timestamp (win->priv->player); if (!timestamp || (info != TARGET_STRING && info != TARGET_UTF8_STRING)) return; gtk_selection_data_set (data, gtk_selection_data_get_target (data), 8, /* byte */ (guchar*) timestamp, strlen (timestamp)); g_free (timestamp); } void pt_window_setup_dnd (PtWindow *win) { /* The whole window is a destination for timestamp drops */ gtk_drag_dest_set (GTK_WIDGET (win), 0, /* no default behavior flags set, we do everything ourselves */ drag_target_string, G_N_ELEMENTS (drag_target_string), GDK_ACTION_COPY); g_signal_connect (GTK_WIDGET (win), "drag_motion", G_CALLBACK (win_dnd_motion_cb), win); g_signal_connect (GTK_WIDGET (win), "drag_data_received", G_CALLBACK (win_dnd_received_cb), win); g_signal_connect (GTK_WIDGET (win), "drag_drop", G_CALLBACK (win_dnd_drop_cb), win); /* The time label (its event box) is a source for timestamp drags */ gtk_drag_source_set (win->priv->label_box, GDK_BUTTON1_MASK, drag_target_string, G_N_ELEMENTS (drag_target_string), GDK_ACTION_COPY); g_signal_connect (win->priv->label_box, "drag_data_get", G_CALLBACK (label_dnd_get_cb), win); } parlatype-1.5.4/src/pt-window.h0000755000175000017500000000302613171727132013343 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #ifndef PT_WINDOW_H #define PT_WINDOW_H #include "config.h" #include #include "pt-app.h" #define PT_WINDOW_TYPE (pt_window_get_type()) #define PT_WINDOW(obj) (G_TYPE_CHECK_INSTANCE_CAST((obj), PT_WINDOW_TYPE, PtWindow)) #define PT_IS_WINDOW(obj) (G_TYPE_CHECK_INSTANCE_TYPE ((obj), PT_WINDOW_TYPE)) typedef struct _PtWindow PtWindow; typedef struct _PtWindowClass PtWindowClass; typedef struct _PtWindowPrivate PtWindowPrivate; struct _PtWindow { GtkApplicationWindow parent; /*< private > */ PtWindowPrivate *priv; }; struct _PtWindowClass { GtkApplicationWindowClass parent_class; }; GType pt_window_get_type (void) G_GNUC_CONST; void pt_error_message (PtWindow *parent, const gchar *message); void pt_window_open_file (PtWindow *win, gchar *uri); PtWindow *pt_window_new (PtApp *app); #endif parlatype-1.5.4/src/pt-preferences.h0000644000175000017500000000302013171727132014324 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ /* This is the preferences dialog */ #ifndef PT_PREFERENCES_H #define PT_PREFERENCES_H #include "config.h" #define PT_TYPE_PREFERENCES_DIALOG (pt_preferences_dialog_get_type()) #define PT_PREFERENCES_DIALOG(obj) (G_TYPE_CHECK_INSTANCE_CAST((obj), PT_TYPE_PREFERENCES_DIALOG, PtPreferencesDialog)) typedef struct _PtPreferencesDialog PtPreferencesDialog; typedef struct _PtPreferencesDialogClass PtPreferencesDialogClass; typedef struct _PtPreferencesDialogPrivate PtPreferencesDialogPrivate; struct _PtPreferencesDialog { GtkDialog dialog; /*< private > */ PtPreferencesDialogPrivate *priv; }; struct _PtPreferencesDialogClass { GtkDialogClass parent_class; }; GType pt_preferences_dialog_get_type (void) G_GNUC_CONST; void pt_show_preferences_dialog (GtkWindow *parent); G_END_DECLS #endif parlatype-1.5.4/src/Makefile.am0000644000175000017500000000267513171727132013304 00000000000000bin_PROGRAMS=parlatype resource_xml = $(srcdir)/resources/parlatype.gresource.xml resource_files = $(shell glib-compile-resources --sourcedir=$(srcdir)/resources --generate-dependencies $(resource_xml)) pt-resources.c: $(resource_xml) $(resource_files) $(AM_V_GEN)glib-compile-resources \ --target=$@ \ --sourcedir=$(srcdir)/resources \ --generate-source \ --c-name parlatype $(resource_xml) pt-resources.h: $(resource_xml) $(resource_files) $(AM_V_GEN)glib-compile-resources \ --target=$@ \ --sourcedir=$(srcdir)/resources \ --generate-header \ --c-name parlatype $(resource_xml) BUILT_SOURCES = \ pt-resources.c \ pt-resources.h \ $(NULL) parlatype_SOURCES = \ $(BUILT_SOURCES) \ main.c \ pt-app.c \ pt-app.h \ pt-dbus-service.c \ pt-dbus-service.h \ pt-goto-dialog.c \ pt-goto-dialog.h \ pt-mediakeys.c \ pt-mediakeys.h \ pt-preferences.c \ pt-preferences.h \ pt-window.c \ pt-window.h \ pt-window-dnd.c \ pt-window-dnd.h \ pt-window-private.h parlatype_LDADD = \ $(top_builddir)/libparlatype/src/libparlatype.la \ $(GTK_LIBS) AM_CPPFLAGS = \ -I$(top_srcdir)/ \ -I$(top_builddir)/ \ -I$(top_srcdir)/libparlatype \ -I$(top_builddir)/libparlatype \ -I$(top_srcdir)/libparlatype/src \ -I$(top_builddir)/libparlatype/src \ $(WARNINGCFLAGS) \ $(GTK_CFLAGS) \ -DLOCALEDIR=\"$(localedir)\" EXTRA_DIST = \ $(resource_files) \ $(resource_xml) CLEANFILES = $(BUILT_SOURCES) parlatype-1.5.4/docs/0000755000175000017500000000000013204324053011447 500000000000000parlatype-1.5.4/docs/Makefile.in0000644000175000017500000004015013204324006013432 00000000000000# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = docs DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ $(dist_man_MANS) ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } man1dir = $(mandir)/man1 am__installdirs = "$(DESTDIR)$(man1dir)" NROFF = nroff MANS = $(dist_man_MANS) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ APPDATA_VALIDATE = @APPDATA_VALIDATE@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DESKTOP_FILE_VALIDATE = @DESKTOP_FILE_VALIDATE@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ GTKDOC_CHECK = @GTKDOC_CHECK@ GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ GTKDOC_REBASE = @GTKDOC_REBASE@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ HELP_DIR = @HELP_DIR@ HTML_DIR = @HTML_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ ITSTOOL = @ITSTOOL@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ WARNINGCFLAGS = @WARNINGCFLAGS@ XGETTEXT = @XGETTEXT@ XMLLINT = @XMLLINT@ YELP_LC_DIST = @YELP_LC_DIST@ YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gsettingsschemadir = @gsettingsschemadir@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ intltool__v_merge_options_ = @intltool__v_merge_options_@ intltool__v_merge_options_0 = @intltool__v_merge_options_0@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ dist_man_MANS = parlatype.1 all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign docs/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-man1: $(dist_man_MANS) @$(NORMAL_INSTALL) @list1=''; \ list2='$(dist_man_MANS)'; \ test -n "$(man1dir)" \ && test -n "`echo $$list1$$list2`" \ || exit 0; \ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ { for i in $$list1; do echo "$$i"; done; \ if test -n "$$list2"; then \ for i in $$list2; do echo "$$i"; done \ | sed -n '/\.1[a-z]*$$/p'; \ fi; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ done; } uninstall-man1: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man1dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(MANS) installdirs: for dir in "$(DESTDIR)$(man1dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-man install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-man1 install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-man uninstall-man: uninstall-man1 .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ cscopelist-am ctags-am distclean distclean-generic \ distclean-libtool distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-man1 install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am tags-am uninstall uninstall-am uninstall-man \ uninstall-man1 # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: parlatype-1.5.4/docs/parlatype.10000644000175000017500000000304213176574164013473 00000000000000.\" Hey, EMACS: -*- nroff -*- .\" (C) Copyright 2016 Gabor Karsay , .\" .\" First parameter, NAME, should be all caps .\" Second parameter, SECTION, should be 1-8, maybe w/ subsection .\" other parameters are allowed: see man(7), man(1) .TH PARLATYPE 1 "January 14, 2016" .\" Please adjust this date whenever revising the manpage. .\" .\" Some roff macros, for reference: .\" .nh disable hyphenation .\" .hy enable hyphenation .\" .ad l left justify .\" .ad b justify to both left and right margins .\" .nf disable filling .\" .fi enable filling .\" .br insert line break .\" .sp insert n+1 empty lines .\" for manpage-specific macros, see man(7) .SH NAME parlatype \- minimal audio player for manual speech transcription .SH SYNOPSIS .B parlatype .RI [ options ] .RI [ file ] .SH DESCRIPTION .B parlatype is an audio player for the GNOME desktop environment. Its main purpose is the manual transcription of spoken audio files. .SH OPTIONS .B parlatype follows the usual GNU command line syntax, with long options starting with two dashes (`-'). .TP .B \-h, \-\-help Show summary of options. .TP .B \-v, \-\-version Show version of program and exit. .TP .B file Specifies the file to open when .B parlatype starts. Only one file will be opened, any other file will be ignored. .SH RETURN VALUE .TP .B 0 normal termination .TP .B 1 invoked with unknown options .TP .B 2 GStreamer backend couldn't be initialized .SH AUTHOR Gabor Karsay (gabor.karsay@gmx.at) parlatype-1.5.4/docs/Makefile.am0000644000175000017500000000003413171727132013430 00000000000000dist_man_MANS = parlatype.1 parlatype-1.5.4/ltmain.sh0000644000175000017500000105203013167645076012303 00000000000000 # libtool (GNU libtool) 2.4.2 # Written by Gordon Matzigkeit , 1996 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, # 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, # or obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # Usage: $progname [OPTION]... [MODE-ARG]... # # Provide generalized library-building support services. # # --config show all configuration variables # --debug enable verbose shell tracing # -n, --dry-run display commands without modifying any files # --features display basic configuration information and exit # --mode=MODE use operation mode MODE # --preserve-dup-deps don't remove duplicate dependency libraries # --quiet, --silent don't print informational messages # --no-quiet, --no-silent # print informational messages (default) # --no-warn don't display warning messages # --tag=TAG use configuration variables from tag TAG # -v, --verbose print more informational messages than default # --no-verbose don't print the extra informational messages # --version print version information # -h, --help, --help-all print short, long, or detailed help message # # MODE must be one of the following: # # clean remove files from the build directory # compile compile a source file into a libtool object # execute automatically set library path, then run a program # finish complete the installation of libtool libraries # install install libraries or executables # link create a library or an executable # uninstall remove libraries from an installed directory # # MODE-ARGS vary depending on the MODE. When passed as first option, # `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. # Try `$progname --help --mode=MODE' for a more detailed description of MODE. # # When reporting a bug, please describe a test case to reproduce it and # include the following information: # # host-triplet: $host # shell: $SHELL # compiler: $LTCC # compiler flags: $LTCFLAGS # linker: $LD (gnu? $with_gnu_ld) # $progname: (GNU libtool) 2.4.2 Debian-2.4.2-1.11 # automake: $automake_version # autoconf: $autoconf_version # # Report bugs to . # GNU libtool home page: . # General help using GNU software: . PROGRAM=libtool PACKAGE=libtool VERSION="2.4.2 Debian-2.4.2-1.11" TIMESTAMP="" package_revision=1.3337 # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } # NLS nuisances: We save the old values to restore during execute mode. lt_user_locale= lt_safe_locale= for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${$lt_var+set}\" = set; then save_$lt_var=\$$lt_var $lt_var=C export $lt_var lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" fi" done LC_ALL=C LANGUAGE=C export LANGUAGE LC_ALL $lt_unset CDPATH # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh # is ksh but when the shell is invoked as "sh" and the current value of # the _XPG environment variable is not equal to 1 (one), the special # positional parameter $0, within a function call, is the name of the # function. progpath="$0" : ${CP="cp -f"} test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} : ${MAKE="make"} : ${MKDIR="mkdir"} : ${MV="mv -f"} : ${RM="rm -f"} : ${SHELL="${CONFIG_SHELL-/bin/sh}"} : ${Xsed="$SED -e 1s/^X//"} # Global variables: EXIT_SUCCESS=0 EXIT_FAILURE=1 EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. exit_status=$EXIT_SUCCESS # Make sure IFS has a sensible default lt_nl=' ' IFS=" $lt_nl" dirname="s,/[^/]*$,," basename="s,^.*/,," # func_dirname file append nondir_replacement # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. func_dirname () { func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi } # func_dirname may be replaced by extended shell implementation # func_basename file func_basename () { func_basename_result=`$ECHO "${1}" | $SED "$basename"` } # func_basename may be replaced by extended shell implementation # func_dirname_and_basename file append nondir_replacement # perform func_basename and func_dirname in a single function # call: # dirname: Compute the dirname of FILE. If nonempty, # add APPEND to the result, otherwise set result # to NONDIR_REPLACEMENT. # value returned in "$func_dirname_result" # basename: Compute filename of FILE. # value retuned in "$func_basename_result" # Implementation must be kept synchronized with func_dirname # and func_basename. For efficiency, we do not delegate to # those functions but instead duplicate the functionality here. func_dirname_and_basename () { # Extract subdirectory from the argument. func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` } # func_dirname_and_basename may be replaced by extended shell implementation # func_stripname prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # func_strip_suffix prefix name func_stripname () { case ${2} in .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; esac } # func_stripname may be replaced by extended shell implementation # These SED scripts presuppose an absolute path with a trailing slash. pathcar='s,^/\([^/]*\).*$,\1,' pathcdr='s,^/[^/]*,,' removedotparts=':dotsl s@/\./@/@g t dotsl s,/\.$,/,' collapseslashes='s@/\{1,\}@/@g' finalslash='s,/*$,/,' # func_normal_abspath PATH # Remove doubled-up and trailing slashes, "." path components, # and cancel out any ".." path components in PATH after making # it an absolute path. # value returned in "$func_normal_abspath_result" func_normal_abspath () { # Start from root dir and reassemble the path. func_normal_abspath_result= func_normal_abspath_tpath=$1 func_normal_abspath_altnamespace= case $func_normal_abspath_tpath in "") # Empty path, that just means $cwd. func_stripname '' '/' "`pwd`" func_normal_abspath_result=$func_stripname_result return ;; # The next three entries are used to spot a run of precisely # two leading slashes without using negated character classes; # we take advantage of case's first-match behaviour. ///*) # Unusual form of absolute path, do nothing. ;; //*) # Not necessarily an ordinary path; POSIX reserves leading '//' # and for example Cygwin uses it to access remote file shares # over CIFS/SMB, so we conserve a leading double slash if found. func_normal_abspath_altnamespace=/ ;; /*) # Absolute path, do nothing. ;; *) # Relative path, prepend $cwd. func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath ;; esac # Cancel out all the simple stuff to save iterations. We also want # the path to end with a slash for ease of parsing, so make sure # there is one (and only one) here. func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` while :; do # Processed it all yet? if test "$func_normal_abspath_tpath" = / ; then # If we ascended to the root using ".." the result may be empty now. if test -z "$func_normal_abspath_result" ; then func_normal_abspath_result=/ fi break fi func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$pathcar"` func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$pathcdr"` # Figure out what to do with it case $func_normal_abspath_tcomponent in "") # Trailing empty path component, ignore it. ;; ..) # Parent dir; strip last assembled component from result. func_dirname "$func_normal_abspath_result" func_normal_abspath_result=$func_dirname_result ;; *) # Actual path component, append it. func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent ;; esac done # Restore leading double-slash if one was found on entry. func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result } # func_relative_path SRCDIR DSTDIR # generates a relative path from SRCDIR to DSTDIR, with a trailing # slash if non-empty, suitable for immediately appending a filename # without needing to append a separator. # value returned in "$func_relative_path_result" func_relative_path () { func_relative_path_result= func_normal_abspath "$1" func_relative_path_tlibdir=$func_normal_abspath_result func_normal_abspath "$2" func_relative_path_tbindir=$func_normal_abspath_result # Ascend the tree starting from libdir while :; do # check if we have found a prefix of bindir case $func_relative_path_tbindir in $func_relative_path_tlibdir) # found an exact match func_relative_path_tcancelled= break ;; $func_relative_path_tlibdir*) # found a matching prefix func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" func_relative_path_tcancelled=$func_stripname_result if test -z "$func_relative_path_result"; then func_relative_path_result=. fi break ;; *) func_dirname $func_relative_path_tlibdir func_relative_path_tlibdir=${func_dirname_result} if test "x$func_relative_path_tlibdir" = x ; then # Have to descend all the way to the root! func_relative_path_result=../$func_relative_path_result func_relative_path_tcancelled=$func_relative_path_tbindir break fi func_relative_path_result=../$func_relative_path_result ;; esac done # Now calculate path; take care to avoid doubling-up slashes. func_stripname '' '/' "$func_relative_path_result" func_relative_path_result=$func_stripname_result func_stripname '/' '/' "$func_relative_path_tcancelled" if test "x$func_stripname_result" != x ; then func_relative_path_result=${func_relative_path_result}/${func_stripname_result} fi # Normalisation. If bindir is libdir, return empty string, # else relative path ending with a slash; either way, target # file name can be directly appended. if test ! -z "$func_relative_path_result"; then func_stripname './' '' "$func_relative_path_result/" func_relative_path_result=$func_stripname_result fi } # The name of this program: func_dirname_and_basename "$progpath" progname=$func_basename_result # Make sure we have an absolute path for reexecution: case $progpath in [\\/]*|[A-Za-z]:\\*) ;; *[\\/]*) progdir=$func_dirname_result progdir=`cd "$progdir" && pwd` progpath="$progdir/$progname" ;; *) save_IFS="$IFS" IFS=${PATH_SEPARATOR-:} for progdir in $PATH; do IFS="$save_IFS" test -x "$progdir/$progname" && break done IFS="$save_IFS" test -n "$progdir" || progdir=`pwd` progpath="$progdir/$progname" ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed="${SED}"' -e 1s/^X//' sed_quote_subst='s/\([`"$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution that turns a string into a regex matching for the # string literally. sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' # Sed substitution that converts a w32 file name or path # which contains forward slashes, into one that contains # (escaped) backslashes. A very naive implementation. lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' # Re-`\' parameter expansions in output of double_quote_subst that were # `\'-ed in input to the same. If an odd number of `\' preceded a '$' # in input to double_quote_subst, that '$' was protected from expansion. # Since each input `\' is now two `\'s, look for any number of runs of # four `\'s followed by two `\'s and then a '$'. `\' that '$'. bs='\\' bs2='\\\\' bs4='\\\\\\\\' dollar='\$' sed_double_backslash="\ s/$bs4/&\\ /g s/^$bs2$dollar/$bs&/ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g s/\n//g" # Standard options: opt_dry_run=false opt_help=false opt_quiet=false opt_verbose=false opt_warning=: # func_echo arg... # Echo program name prefixed message, along with the current mode # name if it has been set yet. func_echo () { $ECHO "$progname: ${opt_mode+$opt_mode: }$*" } # func_verbose arg... # Echo program name prefixed message in verbose mode only. func_verbose () { $opt_verbose && func_echo ${1+"$@"} # A bug in bash halts the script if the last line of a function # fails when set -e is in force, so we need another command to # work around that: : } # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "$*" } # func_error arg... # Echo program name prefixed message to standard error. func_error () { $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 } # func_warning arg... # Echo program name prefixed warning message to standard error. func_warning () { $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 # bash bug again: : } # func_fatal_error arg... # Echo program name prefixed message to standard error, and exit. func_fatal_error () { func_error ${1+"$@"} exit $EXIT_FAILURE } # func_fatal_help arg... # Echo program name prefixed message to standard error, followed by # a help hint, and exit. func_fatal_help () { func_error ${1+"$@"} func_fatal_error "$help" } help="Try \`$progname --help' for more information." ## default # func_grep expression filename # Check whether EXPRESSION matches any line of FILENAME, without output. func_grep () { $GREP "$1" "$2" >/dev/null 2>&1 } # func_mkdir_p directory-path # Make sure the entire path to DIRECTORY-PATH is available. func_mkdir_p () { my_directory_path="$1" my_dir_list= if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then # Protect directory names starting with `-' case $my_directory_path in -*) my_directory_path="./$my_directory_path" ;; esac # While some portion of DIR does not yet exist... while test ! -d "$my_directory_path"; do # ...make a list in topmost first order. Use a colon delimited # list incase some portion of path contains whitespace. my_dir_list="$my_directory_path:$my_dir_list" # If the last portion added has no slash in it, the list is done case $my_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` done my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` save_mkdir_p_IFS="$IFS"; IFS=':' for my_dir in $my_dir_list; do IFS="$save_mkdir_p_IFS" # mkdir can fail with a `File exist' error if two processes # try to create one of the directories concurrently. Don't # stop in that case! $MKDIR "$my_dir" 2>/dev/null || : done IFS="$save_mkdir_p_IFS" # Bail out if we (or some other process) failed to create a directory. test -d "$my_directory_path" || \ func_fatal_error "Failed to create \`$1'" fi } # func_mktempdir [string] # Make a temporary directory that won't clash with other running # libtool processes, and avoids race conditions if possible. If # given, STRING is the basename for that directory. func_mktempdir () { my_template="${TMPDIR-/tmp}/${1-$progname}" if test "$opt_dry_run" = ":"; then # Return a directory name, but don't create it in dry-run mode my_tmpdir="${my_template}-$$" else # If mktemp works, use that first and foremost my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` if test ! -d "$my_tmpdir"; then # Failing that, at least try and use $RANDOM to avoid a race my_tmpdir="${my_template}-${RANDOM-0}$$" save_mktempdir_umask=`umask` umask 0077 $MKDIR "$my_tmpdir" umask $save_mktempdir_umask fi # If we're not in dry-run mode, bomb out on failure test -d "$my_tmpdir" || \ func_fatal_error "cannot create temporary directory \`$my_tmpdir'" fi $ECHO "$my_tmpdir" } # func_quote_for_eval arg # Aesthetically quote ARG to be evaled later. # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT # is double-quoted, suitable for a subsequent eval, whereas # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters # which are still active within double quotes backslashified. func_quote_for_eval () { case $1 in *[\\\`\"\$]*) func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; *) func_quote_for_eval_unquoted_result="$1" ;; esac case $func_quote_for_eval_unquoted_result in # Double-quote args containing shell metacharacters to delay # word splitting, command substitution and and variable # expansion for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" ;; *) func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" esac } # func_quote_for_expand arg # Aesthetically quote ARG to be evaled later; same as above, # but do not quote variable references. func_quote_for_expand () { case $1 in *[\\\`\"]*) my_arg=`$ECHO "$1" | $SED \ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; *) my_arg="$1" ;; esac case $my_arg in # Double-quote args containing shell metacharacters to delay # word splitting and command substitution for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") my_arg="\"$my_arg\"" ;; esac func_quote_for_expand_result="$my_arg" } # func_show_eval cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. func_show_eval () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$my_cmd" my_status=$? if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_show_eval_locale cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. Use the saved locale for evaluation. func_show_eval_locale () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$lt_user_locale $my_cmd" my_status=$? eval "$lt_safe_locale" if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_tr_sh # Turn $1 into a string suitable for a shell variable name. # Result is stored in $func_tr_sh_result. All characters # not in the set a-zA-Z0-9_ are replaced with '_'. Further, # if $1 begins with a digit, a '_' is prepended as well. func_tr_sh () { case $1 in [0-9]* | *[!a-zA-Z0-9_]*) func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` ;; * ) func_tr_sh_result=$1 ;; esac } # func_version # Echo version message to standard output and exit. func_version () { $opt_debug $SED -n '/(C)/!b go :more /\./!{ N s/\n# / / b more } :go /^# '$PROGRAM' (GNU /,/# warranty; / { s/^# // s/^# *$// s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ p }' < "$progpath" exit $? } # func_usage # Echo short help message to standard output and exit. func_usage () { $opt_debug $SED -n '/^# Usage:/,/^# *.*--help/ { s/^# // s/^# *$// s/\$progname/'$progname'/ p }' < "$progpath" echo $ECHO "run \`$progname --help | more' for full usage" exit $? } # func_help [NOEXIT] # Echo long help message to standard output and exit, # unless 'noexit' is passed as argument. func_help () { $opt_debug $SED -n '/^# Usage:/,/# Report bugs to/ { :print s/^# // s/^# *$// s*\$progname*'$progname'* s*\$host*'"$host"'* s*\$SHELL*'"$SHELL"'* s*\$LTCC*'"$LTCC"'* s*\$LTCFLAGS*'"$LTCFLAGS"'* s*\$LD*'"$LD"'* s/\$with_gnu_ld/'"$with_gnu_ld"'/ s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ p d } /^# .* home page:/b print /^# General help using/b print ' < "$progpath" ret=$? if test -z "$1"; then exit $ret fi } # func_missing_arg argname # Echo program name prefixed message to standard error and set global # exit_cmd. func_missing_arg () { $opt_debug func_error "missing argument for $1." exit_cmd=exit } # func_split_short_opt shortopt # Set func_split_short_opt_name and func_split_short_opt_arg shell # variables after splitting SHORTOPT after the 2nd character. func_split_short_opt () { my_sed_short_opt='1s/^\(..\).*$/\1/;q' my_sed_short_rest='1s/^..\(.*\)$/\1/;q' func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` } # func_split_short_opt may be replaced by extended shell implementation # func_split_long_opt longopt # Set func_split_long_opt_name and func_split_long_opt_arg shell # variables after splitting LONGOPT at the `=' sign. func_split_long_opt () { my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' my_sed_long_arg='1s/^--[^=]*=//' func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` } # func_split_long_opt may be replaced by extended shell implementation exit_cmd=: magic="%%%MAGIC variable%%%" magic_exe="%%%MAGIC EXE variable%%%" # Global variables. nonopt= preserve_args= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" extracted_archives= extracted_serial=0 # If this variable is set in any of the actions, the command in it # will be execed at the end. This prevents here-documents from being # left over by shells. exec_cmd= # func_append var value # Append VALUE to the end of shell variable VAR. func_append () { eval "${1}=\$${1}\${2}" } # func_append may be replaced by extended shell implementation # func_append_quoted var value # Quote VALUE and append to the end of shell variable VAR, separated # by a space. func_append_quoted () { func_quote_for_eval "${2}" eval "${1}=\$${1}\\ \$func_quote_for_eval_result" } # func_append_quoted may be replaced by extended shell implementation # func_arith arithmetic-term... func_arith () { func_arith_result=`expr "${@}"` } # func_arith may be replaced by extended shell implementation # func_len string # STRING may not start with a hyphen. func_len () { func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` } # func_len may be replaced by extended shell implementation # func_lo2o object func_lo2o () { func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` } # func_lo2o may be replaced by extended shell implementation # func_xform libobj-or-source func_xform () { func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` } # func_xform may be replaced by extended shell implementation # func_fatal_configuration arg... # Echo program name prefixed message to standard error, followed by # a configuration failure hint, and exit. func_fatal_configuration () { func_error ${1+"$@"} func_error "See the $PACKAGE documentation for more information." func_fatal_error "Fatal configuration error." } # func_config # Display the configuration for all the tags in this script. func_config () { re_begincf='^# ### BEGIN LIBTOOL' re_endcf='^# ### END LIBTOOL' # Default configuration. $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" # Now print the configurations for the tags. for tagname in $taglist; do $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" done exit $? } # func_features # Display the features supported by this script. func_features () { echo "host: $host" if test "$build_libtool_libs" = yes; then echo "enable shared libraries" else echo "disable shared libraries" fi if test "$build_old_libs" = yes; then echo "enable static libraries" else echo "disable static libraries" fi exit $? } # func_enable_tag tagname # Verify that TAGNAME is valid, and either flag an error and exit, or # enable the TAGNAME tag. We also add TAGNAME to the global $taglist # variable here. func_enable_tag () { # Global variable: tagname="$1" re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" sed_extractcf="/$re_begincf/,/$re_endcf/p" # Validate tagname. case $tagname in *[!-_A-Za-z0-9,/]*) func_fatal_error "invalid tag name: $tagname" ;; esac # Don't test for the "default" C tag, as we know it's # there but not specially marked. case $tagname in CC) ;; *) if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then taglist="$taglist $tagname" # Evaluate the configuration. Be careful to quote the path # and the sed script, to avoid splitting on whitespace, but # also don't use non-portable quotes within backquotes within # quotes we have to do it in 2 steps: extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` eval "$extractedcf" else func_error "ignoring unknown tag $tagname" fi ;; esac } # func_check_version_match # Ensure that we are using m4 macros, and libtool script from the same # release of libtool. func_check_version_match () { if test "$package_revision" != "$macro_revision"; then if test "$VERSION" != "$macro_version"; then if test -z "$macro_version"; then cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from an older release. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from $PACKAGE $macro_version. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF fi else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, $progname: but the definition of this LT_INIT comes from revision $macro_revision. $progname: You should recreate aclocal.m4 with macros from revision $package_revision $progname: of $PACKAGE $VERSION and run autoconf again. _LT_EOF fi exit $EXIT_MISMATCH fi } # Shorthand for --mode=foo, only valid as the first argument case $1 in clean|clea|cle|cl) shift; set dummy --mode clean ${1+"$@"}; shift ;; compile|compil|compi|comp|com|co|c) shift; set dummy --mode compile ${1+"$@"}; shift ;; execute|execut|execu|exec|exe|ex|e) shift; set dummy --mode execute ${1+"$@"}; shift ;; finish|finis|fini|fin|fi|f) shift; set dummy --mode finish ${1+"$@"}; shift ;; install|instal|insta|inst|ins|in|i) shift; set dummy --mode install ${1+"$@"}; shift ;; link|lin|li|l) shift; set dummy --mode link ${1+"$@"}; shift ;; uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) shift; set dummy --mode uninstall ${1+"$@"}; shift ;; esac # Option defaults: opt_debug=: opt_dry_run=false opt_config=false opt_preserve_dup_deps=false opt_features=false opt_finish=false opt_help=false opt_help_all=false opt_silent=: opt_warning=: opt_verbose=: opt_silent=false opt_verbose=false # Parse options once, thoroughly. This comes as soon as possible in the # script to make things like `--version' happen as quickly as we can. { # this just eases exit handling while test $# -gt 0; do opt="$1" shift case $opt in --debug|-x) opt_debug='set -x' func_echo "enabling shell trace mode" $opt_debug ;; --dry-run|--dryrun|-n) opt_dry_run=: ;; --config) opt_config=: func_config ;; --dlopen|-dlopen) optarg="$1" opt_dlopen="${opt_dlopen+$opt_dlopen }$optarg" shift ;; --preserve-dup-deps) opt_preserve_dup_deps=: ;; --features) opt_features=: func_features ;; --finish) opt_finish=: set dummy --mode finish ${1+"$@"}; shift ;; --help) opt_help=: ;; --help-all) opt_help_all=: opt_help=': help-all' ;; --mode) test $# = 0 && func_missing_arg $opt && break optarg="$1" opt_mode="$optarg" case $optarg in # Valid mode arguments: clean|compile|execute|finish|install|link|relink|uninstall) ;; # Catch anything else as an error *) func_error "invalid argument for $opt" exit_cmd=exit break ;; esac shift ;; --no-silent|--no-quiet) opt_silent=false func_append preserve_args " $opt" ;; --no-warning|--no-warn) opt_warning=false func_append preserve_args " $opt" ;; --no-verbose) opt_verbose=false func_append preserve_args " $opt" ;; --silent|--quiet) opt_silent=: func_append preserve_args " $opt" opt_verbose=false ;; --verbose|-v) opt_verbose=: func_append preserve_args " $opt" opt_silent=false ;; --tag) test $# = 0 && func_missing_arg $opt && break optarg="$1" opt_tag="$optarg" func_append preserve_args " $opt $optarg" func_enable_tag "$optarg" shift ;; -\?|-h) func_usage ;; --help) func_help ;; --version) func_version ;; # Separate optargs to long options: --*=*) func_split_long_opt "$opt" set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} shift ;; # Separate non-argument short options: -\?*|-h*|-n*|-v*) func_split_short_opt "$opt" set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} shift ;; --) break ;; -*) func_fatal_help "unrecognized option \`$opt'" ;; *) set dummy "$opt" ${1+"$@"}; shift; break ;; esac done # Validate options: # save first non-option argument if test "$#" -gt 0; then nonopt="$opt" shift fi # preserve --debug test "$opt_debug" = : || func_append preserve_args " --debug" case $host in *cygwin* | *mingw* | *pw32* | *cegcc*) # don't eliminate duplications in $postdeps and $predeps opt_duplicate_compiler_generated_deps=: ;; *) opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps ;; esac $opt_help || { # Sanity checks first: func_check_version_match if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then func_fatal_configuration "not configured to build any kind of library" fi # Darwin sucks eval std_shrext=\"$shrext_cmds\" # Only execute mode is allowed to have -dlopen flags. if test -n "$opt_dlopen" && test "$opt_mode" != execute; then func_error "unrecognized option \`-dlopen'" $ECHO "$help" 1>&2 exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. generic_help="$help" help="Try \`$progname --help --mode=$opt_mode' for more information." } # Bail if the options were screwed $exit_cmd $EXIT_FAILURE } ## ----------- ## ## Main. ## ## ----------- ## # func_lalib_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_lalib_p () { test -f "$1" && $SED -e 4q "$1" 2>/dev/null \ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 } # func_lalib_unsafe_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function implements the same check as func_lalib_p without # resorting to external programs. To this end, it redirects stdin and # closes it afterwards, without saving the original file descriptor. # As a safety measure, use it only where a negative result would be # fatal anyway. Works if `file' does not exist. func_lalib_unsafe_p () { lalib_p=no if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then for lalib_p_l in 1 2 3 4 do read lalib_p_line case "$lalib_p_line" in \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; esac done exec 0<&5 5<&- fi test "$lalib_p" = yes } # func_ltwrapper_script_p file # True iff FILE is a libtool wrapper script # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_script_p () { func_lalib_p "$1" } # func_ltwrapper_executable_p file # True iff FILE is a libtool wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_executable_p () { func_ltwrapper_exec_suffix= case $1 in *.exe) ;; *) func_ltwrapper_exec_suffix=.exe ;; esac $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 } # func_ltwrapper_scriptname file # Assumes file is an ltwrapper_executable # uses $file to determine the appropriate filename for a # temporary ltwrapper_script. func_ltwrapper_scriptname () { func_dirname_and_basename "$1" "" "." func_stripname '' '.exe' "$func_basename_result" func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" } # func_ltwrapper_p file # True iff FILE is a libtool wrapper script or wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_p () { func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" } # func_execute_cmds commands fail_cmd # Execute tilde-delimited COMMANDS. # If FAIL_CMD is given, eval that upon failure. # FAIL_CMD may read-access the current command in variable CMD! func_execute_cmds () { $opt_debug save_ifs=$IFS; IFS='~' for cmd in $1; do IFS=$save_ifs eval cmd=\"$cmd\" func_show_eval "$cmd" "${2-:}" done IFS=$save_ifs } # func_source file # Source FILE, adding directory component if necessary. # Note that it is not necessary on cygwin/mingw to append a dot to # FILE even if both FILE and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing # `FILE.' does not work on cygwin managed mounts. func_source () { $opt_debug case $1 in */* | *\\*) . "$1" ;; *) . "./$1" ;; esac } # func_resolve_sysroot PATH # Replace a leading = in PATH with a sysroot. Store the result into # func_resolve_sysroot_result func_resolve_sysroot () { func_resolve_sysroot_result=$1 case $func_resolve_sysroot_result in =*) func_stripname '=' '' "$func_resolve_sysroot_result" func_resolve_sysroot_result=$lt_sysroot$func_stripname_result ;; esac } # func_replace_sysroot PATH # If PATH begins with the sysroot, replace it with = and # store the result into func_replace_sysroot_result. func_replace_sysroot () { case "$lt_sysroot:$1" in ?*:"$lt_sysroot"*) func_stripname "$lt_sysroot" '' "$1" func_replace_sysroot_result="=$func_stripname_result" ;; *) # Including no sysroot. func_replace_sysroot_result=$1 ;; esac } # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. # Only attempt this if the compiler in the base compile # command doesn't match the default compiler. # arg is usually of the form 'gcc ...' func_infer_tag () { $opt_debug if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) for z in $available_tags; do if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case "$@ " in " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. tagname=$z break ;; esac fi done # If $tagname still isn't set, then no tagged configuration # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then func_echo "unable to infer tagged configuration" func_fatal_error "specify a tag with \`--tag'" # else # func_verbose "using $tagname tagged configuration" fi ;; esac fi } # func_write_libtool_object output_name pic_name nonpic_name # Create a libtool object file (analogous to a ".la" file), # but don't create it if we're doing a dry run. func_write_libtool_object () { write_libobj=${1} if test "$build_libtool_libs" = yes; then write_lobj=\'${2}\' else write_lobj=none fi if test "$build_old_libs" = yes; then write_oldobj=\'${3}\' else write_oldobj=none fi $opt_dry_run || { cat >${write_libobj}T </dev/null` if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | $SED -e "$lt_sed_naive_backslashify"` else func_convert_core_file_wine_to_w32_result= fi fi } # end: func_convert_core_file_wine_to_w32 # func_convert_core_path_wine_to_w32 ARG # Helper function used by path conversion functions when $build is *nix, and # $host is mingw, cygwin, or some other w32 environment. Relies on a correctly # configured wine environment available, with the winepath program in $build's # $PATH. Assumes ARG has no leading or trailing path separator characters. # # ARG is path to be converted from $build format to win32. # Result is available in $func_convert_core_path_wine_to_w32_result. # Unconvertible file (directory) names in ARG are skipped; if no directory names # are convertible, then the result may be empty. func_convert_core_path_wine_to_w32 () { $opt_debug # unfortunately, winepath doesn't convert paths, only file names func_convert_core_path_wine_to_w32_result="" if test -n "$1"; then oldIFS=$IFS IFS=: for func_convert_core_path_wine_to_w32_f in $1; do IFS=$oldIFS func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" if test -n "$func_convert_core_file_wine_to_w32_result" ; then if test -z "$func_convert_core_path_wine_to_w32_result"; then func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" else func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" fi fi done IFS=$oldIFS fi } # end: func_convert_core_path_wine_to_w32 # func_cygpath ARGS... # Wrapper around calling the cygpath program via LT_CYGPATH. This is used when # when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) # $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or # (2), returns the Cygwin file name or path in func_cygpath_result (input # file name or path is assumed to be in w32 format, as previously converted # from $build's *nix or MSYS format). In case (3), returns the w32 file name # or path in func_cygpath_result (input file name or path is assumed to be in # Cygwin format). Returns an empty string on error. # # ARGS are passed to cygpath, with the last one being the file name or path to # be converted. # # Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH # environment variable; do not put it in $PATH. func_cygpath () { $opt_debug if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` if test "$?" -ne 0; then # on failure, ensure result is empty func_cygpath_result= fi else func_cygpath_result= func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" fi } #end: func_cygpath # func_convert_core_msys_to_w32 ARG # Convert file name or path ARG from MSYS format to w32 format. Return # result in func_convert_core_msys_to_w32_result. func_convert_core_msys_to_w32 () { $opt_debug # awkward: cmd appends spaces to result func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` } #end: func_convert_core_msys_to_w32 # func_convert_file_check ARG1 ARG2 # Verify that ARG1 (a file name in $build format) was converted to $host # format in ARG2. Otherwise, emit an error message, but continue (resetting # func_to_host_file_result to ARG1). func_convert_file_check () { $opt_debug if test -z "$2" && test -n "$1" ; then func_error "Could not determine host file name corresponding to" func_error " \`$1'" func_error "Continuing, but uninstalled executables may not work." # Fallback: func_to_host_file_result="$1" fi } # end func_convert_file_check # func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH # Verify that FROM_PATH (a path in $build format) was converted to $host # format in TO_PATH. Otherwise, emit an error message, but continue, resetting # func_to_host_file_result to a simplistic fallback value (see below). func_convert_path_check () { $opt_debug if test -z "$4" && test -n "$3"; then func_error "Could not determine the host path corresponding to" func_error " \`$3'" func_error "Continuing, but uninstalled executables may not work." # Fallback. This is a deliberately simplistic "conversion" and # should not be "improved". See libtool.info. if test "x$1" != "x$2"; then lt_replace_pathsep_chars="s|$1|$2|g" func_to_host_path_result=`echo "$3" | $SED -e "$lt_replace_pathsep_chars"` else func_to_host_path_result="$3" fi fi } # end func_convert_path_check # func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG # Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT # and appending REPL if ORIG matches BACKPAT. func_convert_path_front_back_pathsep () { $opt_debug case $4 in $1 ) func_to_host_path_result="$3$func_to_host_path_result" ;; esac case $4 in $2 ) func_append func_to_host_path_result "$3" ;; esac } # end func_convert_path_front_back_pathsep ################################################## # $build to $host FILE NAME CONVERSION FUNCTIONS # ################################################## # invoked via `$to_host_file_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # Result will be available in $func_to_host_file_result. # func_to_host_file ARG # Converts the file name ARG from $build format to $host format. Return result # in func_to_host_file_result. func_to_host_file () { $opt_debug $to_host_file_cmd "$1" } # end func_to_host_file # func_to_tool_file ARG LAZY # converts the file name ARG from $build format to toolchain format. Return # result in func_to_tool_file_result. If the conversion in use is listed # in (the comma separated) LAZY, no conversion takes place. func_to_tool_file () { $opt_debug case ,$2, in *,"$to_tool_file_cmd",*) func_to_tool_file_result=$1 ;; *) $to_tool_file_cmd "$1" func_to_tool_file_result=$func_to_host_file_result ;; esac } # end func_to_tool_file # func_convert_file_noop ARG # Copy ARG to func_to_host_file_result. func_convert_file_noop () { func_to_host_file_result="$1" } # end func_convert_file_noop # func_convert_file_msys_to_w32 ARG # Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_file_result. func_convert_file_msys_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_to_host_file_result="$func_convert_core_msys_to_w32_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_w32 # func_convert_file_cygwin_to_w32 ARG # Convert file name ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_file_cygwin_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then # because $build is cygwin, we call "the" cygpath in $PATH; no need to use # LT_CYGPATH in this case. func_to_host_file_result=`cygpath -m "$1"` fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_cygwin_to_w32 # func_convert_file_nix_to_w32 ARG # Convert file name ARG from *nix to w32 format. Requires a wine environment # and a working winepath. Returns result in func_to_host_file_result. func_convert_file_nix_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_file_wine_to_w32 "$1" func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_w32 # func_convert_file_msys_to_cygwin ARG # Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_file_msys_to_cygwin () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_cygpath -u "$func_convert_core_msys_to_w32_result" func_to_host_file_result="$func_cygpath_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_cygwin # func_convert_file_nix_to_cygwin ARG # Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed # in a wine environment, working winepath, and LT_CYGPATH set. Returns result # in func_to_host_file_result. func_convert_file_nix_to_cygwin () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. func_convert_core_file_wine_to_w32 "$1" func_cygpath -u "$func_convert_core_file_wine_to_w32_result" func_to_host_file_result="$func_cygpath_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_cygwin ############################################# # $build to $host PATH CONVERSION FUNCTIONS # ############################################# # invoked via `$to_host_path_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # The result will be available in $func_to_host_path_result. # # Path separators are also converted from $build format to $host format. If # ARG begins or ends with a path separator character, it is preserved (but # converted to $host format) on output. # # All path conversion functions are named using the following convention: # file name conversion function : func_convert_file_X_to_Y () # path conversion function : func_convert_path_X_to_Y () # where, for any given $build/$host combination the 'X_to_Y' value is the # same. If conversion functions are added for new $build/$host combinations, # the two new functions must follow this pattern, or func_init_to_host_path_cmd # will break. # func_init_to_host_path_cmd # Ensures that function "pointer" variable $to_host_path_cmd is set to the # appropriate value, based on the value of $to_host_file_cmd. to_host_path_cmd= func_init_to_host_path_cmd () { $opt_debug if test -z "$to_host_path_cmd"; then func_stripname 'func_convert_file_' '' "$to_host_file_cmd" to_host_path_cmd="func_convert_path_${func_stripname_result}" fi } # func_to_host_path ARG # Converts the path ARG from $build format to $host format. Return result # in func_to_host_path_result. func_to_host_path () { $opt_debug func_init_to_host_path_cmd $to_host_path_cmd "$1" } # end func_to_host_path # func_convert_path_noop ARG # Copy ARG to func_to_host_path_result. func_convert_path_noop () { func_to_host_path_result="$1" } # end func_convert_path_noop # func_convert_path_msys_to_w32 ARG # Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_path_result. func_convert_path_msys_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # Remove leading and trailing path separator characters from ARG. MSYS # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; # and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result="$func_convert_core_msys_to_w32_result" func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_msys_to_w32 # func_convert_path_cygwin_to_w32 ARG # Convert path ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_path_cygwin_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_cygwin_to_w32 # func_convert_path_nix_to_w32 ARG # Convert path ARG from *nix to w32 format. Requires a wine environment and # a working winepath. Returns result in func_to_host_file_result. func_convert_path_nix_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_nix_to_w32 # func_convert_path_msys_to_cygwin ARG # Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_path_msys_to_cygwin () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_msys_to_w32_result" func_to_host_path_result="$func_cygpath_result" func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_msys_to_cygwin # func_convert_path_nix_to_cygwin ARG # Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a # a wine environment, working winepath, and LT_CYGPATH set. Returns result in # func_to_host_file_result. func_convert_path_nix_to_cygwin () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # Remove leading and trailing path separator characters from # ARG. msys behavior is inconsistent here, cygpath turns them # into '.;' and ';.', and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" func_to_host_path_result="$func_cygpath_result" func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_nix_to_cygwin # func_mode_compile arg... func_mode_compile () { $opt_debug # Get the compilation command and the source file. base_compile= srcfile="$nonopt" # always keep a non-empty value in "srcfile" suppress_opt=yes suppress_output= arg_mode=normal libobj= later= pie_flag= for arg do case $arg_mode in arg ) # do not "continue". Instead, add this to base_compile lastarg="$arg" arg_mode=normal ;; target ) libobj="$arg" arg_mode=normal continue ;; normal ) # Accept any command-line options. case $arg in -o) test -n "$libobj" && \ func_fatal_error "you cannot specify \`-o' more than once" arg_mode=target continue ;; -pie | -fpie | -fPIE) func_append pie_flag " $arg" continue ;; -shared | -static | -prefer-pic | -prefer-non-pic) func_append later " $arg" continue ;; -no-suppress) suppress_opt=no continue ;; -Xcompiler) arg_mode=arg # the next one goes into the "base_compile" arg list continue # The current "srcfile" will either be retained or ;; # replaced later. I would guess that would be a bug. -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result lastarg= save_ifs="$IFS"; IFS=',' for arg in $args; do IFS="$save_ifs" func_append_quoted lastarg "$arg" done IFS="$save_ifs" func_stripname ' ' '' "$lastarg" lastarg=$func_stripname_result # Add the arguments to base_compile. func_append base_compile " $lastarg" continue ;; *) # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # lastarg="$srcfile" srcfile="$arg" ;; esac # case $arg ;; esac # case $arg_mode # Aesthetically quote the previous argument. func_append_quoted base_compile "$lastarg" done # for arg case $arg_mode in arg) func_fatal_error "you must specify an argument for -Xcompile" ;; target) func_fatal_error "you must specify a target with \`-o'" ;; *) # Get the name of the library object. test -z "$libobj" && { func_basename "$srcfile" libobj="$func_basename_result" } ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo case $libobj in *.[cCFSifmso] | \ *.ada | *.adb | *.ads | *.asm | \ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) func_xform "$libobj" libobj=$func_xform_result ;; esac case $libobj in *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; *) func_fatal_error "cannot determine name of library object from \`$libobj'" ;; esac func_infer_tag $base_compile for arg in $later; do case $arg in -shared) test "$build_libtool_libs" != yes && \ func_fatal_configuration "can not build a shared library" build_old_libs=no continue ;; -static) build_libtool_libs=no build_old_libs=yes continue ;; -prefer-pic) pic_mode=yes continue ;; -prefer-non-pic) pic_mode=no continue ;; esac done func_quote_for_eval "$libobj" test "X$libobj" != "X$func_quote_for_eval_result" \ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ && func_warning "libobj name \`$libobj' may not contain shell special characters." func_dirname_and_basename "$obj" "/" "" objname="$func_basename_result" xdir="$func_dirname_result" lobj=${xdir}$objdir/$objname test -z "$base_compile" && \ func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. if test "$build_old_libs" = yes; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" fi # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in cygwin* | mingw* | pw32* | os2* | cegcc*) pic_mode=default ;; esac if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" else output_obj= need_locks=no lockfile= fi # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then $ECHO "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi func_append removelist " $output_obj" $ECHO "$srcfile" > "$lockfile" fi $opt_dry_run || $RM $removelist func_append removelist " $lockfile" trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 srcfile=$func_to_tool_file_result func_quote_for_eval "$srcfile" qsrcfile=$func_quote_for_eval_result # Only build a PIC object if we are building libtool libraries. if test "$build_libtool_libs" = yes; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile if test "$pic_mode" != no; then command="$base_compile $qsrcfile $pic_flag" else # Don't build PIC code command="$base_compile $qsrcfile" fi func_mkdir_p "$xdir$objdir" if test -z "$output_obj"; then # Place PIC objects in $objdir func_append command " -o $lobj" fi func_show_eval_locale "$command" \ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then func_show_eval '$MV "$output_obj" "$lobj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi # Allow error messages only from the first compilation. if test "$suppress_opt" = yes; then suppress_output=' >/dev/null 2>&1' fi fi # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then if test "$pic_mode" != yes; then # Don't build PIC code command="$base_compile $qsrcfile$pie_flag" else command="$base_compile $qsrcfile $pic_flag" fi if test "$compiler_c_o" = yes; then func_append command " -o $obj" fi # Suppress compiler output if we already did a PIC compilation. func_append command "$suppress_output" func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then func_show_eval '$MV "$output_obj" "$obj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi fi $opt_dry_run || { func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" # Unlock the critical section if it was locked if test "$need_locks" != no; then removelist=$lockfile $RM "$lockfile" fi } exit $EXIT_SUCCESS } $opt_help || { test "$opt_mode" = compile && func_mode_compile ${1+"$@"} } func_mode_help () { # We need to display help for each of the modes. case $opt_mode in "") # Generic help is extracted from the usage comments # at the start of this file. func_help ;; clean) $ECHO \ "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; compile) $ECHO \ "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -no-suppress do not suppress compiler output for multiple passes -prefer-pic try to build PIC objects only -prefer-non-pic try to build non-PIC objects only -shared do not build a \`.o' file suitable for static linking -static only build a \`.o' file suitable for static linking -Wc,FLAG pass FLAG directly to the compiler COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix \`.c' with the library object suffix, \`.lo'." ;; execute) $ECHO \ "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to \`-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $ECHO \ "Usage: $progname [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the \`--dry-run' option if you just want to see what would be executed." ;; install) $ECHO \ "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the \`install' or \`cp' program. The following components of INSTALL-COMMAND are treated specially: -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $ECHO \ "Usage: $progname [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible -bindir BINDIR specify path to binaries directory (for systems where libraries must be found in the PATH setting at runtime) -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened -no-fast-install disable the fast-install mode -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -objectlist FILE Use a list of object files found in FILE to specify objects -precious-files-regex REGEX don't remove output files matching REGEX -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -shared only do dynamic linking of libtool libraries -shrext SUFFIX override the standard shared library file extension -static do not do any dynamic linking of uninstalled libtool libraries -static-libtool-libs do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] -weak LIBNAME declare that the target provides the LIBNAME interface -Wc,FLAG -Xcompiler FLAG pass linker-specific FLAG directly to the compiler -Wl,FLAG -Xlinker FLAG pass linker-specific FLAG directly to the linker -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) All other options (arguments beginning with \`-') are ignored. Every other argument is treated as a filename. Files ending in \`.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only library objects (\`.lo' files) may be specified, and \`-rpath' is required, except when creating a convenience library. If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created using \`ar' and \`ranlib', or on Windows using \`lib'. If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $ECHO \ "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) func_fatal_help "invalid operation mode \`$opt_mode'" ;; esac echo $ECHO "Try \`$progname --help' for more information about other modes." } # Now that we've collected a possible --mode arg, show help if necessary if $opt_help; then if test "$opt_help" = :; then func_mode_help else { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do func_mode_help done } | sed -n '1p; 2,$s/^Usage:/ or: /p' { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do echo func_mode_help done } | sed '1d /^When reporting/,/^Report/{ H d } $x /information about other modes/d /more detailed .*MODE/d s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' fi exit $? fi # func_mode_execute arg... func_mode_execute () { $opt_debug # The first argument is the command name. cmd="$nonopt" test -z "$cmd" && \ func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. for file in $opt_dlopen; do test -f "$file" \ || func_fatal_help "\`$file' is not a file" dir= case $file in *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$lib' is not a valid libtool archive" # Read the libtool library. dlname= library_names= func_source "$file" # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && \ func_warning "\`$file' was not linked with \`-export-dynamic'" continue fi func_dirname "$file" "" "." dir="$func_dirname_result" if test -f "$dir/$objdir/$dlname"; then func_append dir "/$objdir" else if test ! -f "$dir/$dlname"; then func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" fi fi ;; *.lo) # Just add the directory containing the .lo file. func_dirname "$file" "" "." dir="$func_dirname_result" ;; *) func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir="$absdir" # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic="$magic" # Check if any of the arguments is a wrapper script. args= for file do case $file in -* | *.la | *.lo ) ;; *) # Do a test to see if this is really a libtool program. if func_ltwrapper_script_p "$file"; then func_source "$file" # Transform arg to wrapped name. file="$progdir/$program" elif func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" func_source "$func_ltwrapper_scriptname_result" # Transform arg to wrapped name. file="$progdir/$program" fi ;; esac # Quote arguments (to preserve shell metacharacters). func_append_quoted args "$file" done if test "X$opt_dry_run" = Xfalse; then if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" fi # Restore saved environment variables for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${save_$lt_var+set}\" = set; then $lt_var=\$save_$lt_var; export $lt_var else $lt_unset $lt_var fi" done # Now prepare to actually exec the command. exec_cmd="\$cmd$args" else # Display what would be done. if test -n "$shlibpath_var"; then eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" echo "export $shlibpath_var" fi $ECHO "$cmd$args" exit $EXIT_SUCCESS fi } test "$opt_mode" = execute && func_mode_execute ${1+"$@"} # func_mode_finish arg... func_mode_finish () { $opt_debug libs= libdirs= admincmds= for opt in "$nonopt" ${1+"$@"} do if test -d "$opt"; then func_append libdirs " $opt" elif test -f "$opt"; then if func_lalib_unsafe_p "$opt"; then func_append libs " $opt" else func_warning "\`$opt' is not a valid libtool archive" fi else func_fatal_error "invalid argument \`$opt'" fi done if test -n "$libs"; then if test -n "$lt_sysroot"; then sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" else sysroot_cmd= fi # Remove sysroot references if $opt_dry_run; then for lib in $libs; do echo "removing references to $lt_sysroot and \`=' prefixes from $lib" done else tmpdir=`func_mktempdir` for lib in $libs; do sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ > $tmpdir/tmp-la mv -f $tmpdir/tmp-la $lib done ${RM}r "$tmpdir" fi fi if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. func_execute_cmds "$finish_cmds" 'admincmds="$admincmds '"$cmd"'"' fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $opt_dry_run || eval "$cmds" || func_append admincmds " $cmds" fi done fi # Exit here if they wanted silent mode. $opt_silent && exit $EXIT_SUCCESS if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then echo "----------------------------------------------------------------------" echo "Libraries have been installed in:" for libdir in $libdirs; do $ECHO " $libdir" done echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" echo "specify the full pathname of the library, or use the \`-LLIBDIR'" echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then echo " - add LIBDIR to the \`$shlibpath_var' environment variable" echo " during execution" fi if test -n "$runpath_var"; then echo " - add LIBDIR to the \`$runpath_var' environment variable" echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" $ECHO " - use the \`$flag' linker flag" fi if test -n "$admincmds"; then $ECHO " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi echo echo "See any operating system documentation about shared libraries for" case $host in solaris2.[6789]|solaris2.1[0-9]) echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" echo "pages." ;; *) echo "more information, such as the ld(1) and ld.so(8) manual pages." ;; esac echo "----------------------------------------------------------------------" fi exit $EXIT_SUCCESS } test "$opt_mode" = finish && func_mode_finish ${1+"$@"} # func_mode_install arg... func_mode_install () { $opt_debug # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. case $nonopt in *shtool*) :;; *) false;; esac; then # Aesthetically quote it. func_quote_for_eval "$nonopt" install_prog="$func_quote_for_eval_result " arg=$1 shift else install_prog= arg=$nonopt fi # The real first argument should be the name of the installation program. # Aesthetically quote it. func_quote_for_eval "$arg" func_append install_prog "$func_quote_for_eval_result" install_shared_prog=$install_prog case " $install_prog " in *[\\\ /]cp\ *) install_cp=: ;; *) install_cp=false ;; esac # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir=no stripme= no_mode=: for arg do arg2= if test -n "$dest"; then func_append files " $dest" dest=$arg continue fi case $arg in -d) isdir=yes ;; -f) if $install_cp; then :; else prev=$arg fi ;; -g | -m | -o) prev=$arg ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then if test "x$prev" = x-m && test -n "$install_override_mode"; then arg2=$install_override_mode no_mode=false fi prev= else dest=$arg continue fi ;; esac # Aesthetically quote the argument. func_quote_for_eval "$arg" func_append install_prog " $func_quote_for_eval_result" if test -n "$arg2"; then func_quote_for_eval "$arg2" fi func_append install_shared_prog " $func_quote_for_eval_result" done test -z "$install_prog" && \ func_fatal_help "you must specify an install program" test -n "$prev" && \ func_fatal_help "the \`$prev' option requires an argument" if test -n "$install_override_mode" && $no_mode; then if $install_cp; then :; else func_quote_for_eval "$install_override_mode" func_append install_shared_prog " -m $func_quote_for_eval_result" fi fi if test -z "$files"; then if test -z "$dest"; then func_fatal_help "no file or destination specified" else func_fatal_help "you must specify a destination" fi fi # Strip any trailing slash from the destination. func_stripname '' '/' "$dest" dest=$func_stripname_result # Check to see that the destination is a directory. test -d "$dest" && isdir=yes if test "$isdir" = yes; then destdir="$dest" destname= else func_dirname_and_basename "$dest" "" "." destdir="$func_dirname_result" destname="$func_basename_result" # Not a directory, so check to see that there is only one file specified. set dummy $files; shift test "$#" -gt 1 && \ func_fatal_help "\`$dest' is not a directory" fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do case $file in *.lo) ;; *) func_fatal_help "\`$destdir' must be an absolute directory name" ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case $file in *.$libext) # Do the static libraries later. func_append staticlibs " $file" ;; *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$file' is not a valid libtool archive" library_names= old_library= relink_command= func_source "$file" # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) func_append current_libdirs " $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) func_append future_libdirs " $libdir" ;; esac fi func_dirname "$file" "/" "" dir="$func_dirname_result" func_append dir "$objdir" if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that # are installed to the same prefix. # At present, this check doesn't affect windows .dll's that # are installed into $libdir/../bin (currently, that works fine) # but it's something to keep an eye on. test "$inst_prefix_dir" = "$destdir" && \ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` else relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` fi func_warning "relinking \`$file'" func_show_eval "$relink_command" \ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' fi # See the names of the shared library. set dummy $library_names; shift if test -n "$1"; then realname="$1" shift srcname="$realname" test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ 'exit $?' tstripme="$stripme" case $host_os in cygwin* | mingw* | pw32* | cegcc*) case $realname in *.dll.a) tstripme="" ;; esac ;; esac if test -n "$tstripme" && test -n "$striplib"; then func_show_eval "$striplib $destdir/$realname" 'exit $?' fi if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. # Try `ln -sf' first, because the `ln' binary might depend on # the symlink we replace! Solaris /bin/ln does not understand -f, # so we also need to try rm && ln -s. for linkname do test "$linkname" != "$realname" \ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" done fi # Do each command in the postinstall commands. lib="$destdir/$realname" func_execute_cmds "$postinstall_cmds" 'exit $?' fi # Install the pseudo-library for information purposes. func_basename "$file" name="$func_basename_result" instname="$dir/$name"i func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. test -n "$old_library" && func_append staticlibs " $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # Deduce the name of the destination old-style object file. case $destfile in *.lo) func_lo2o "$destfile" staticdest=$func_lo2o_result ;; *.$objext) staticdest="$destfile" destfile= ;; *) func_fatal_help "cannot copy a libtool object to \`$destfile'" ;; esac # Install the libtool object if requested. test -n "$destfile" && \ func_show_eval "$install_prog $file $destfile" 'exit $?' # Install the old object if enabled. if test "$build_old_libs" = yes; then # Deduce the name of the old-style object file. func_lo2o "$file" staticobj=$func_lo2o_result func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' fi exit $EXIT_SUCCESS ;; *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # If the file is missing, and there is a .exe on the end, strip it # because it is most likely a libtool script we actually want to # install stripped_ext="" case $file in *.exe) if test ! -f "$file"; then func_stripname '' '.exe' "$file" file=$func_stripname_result stripped_ext=".exe" fi ;; esac # Do a test to see if this is really a libtool program. case $host in *cygwin* | *mingw*) if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" wrapper=$func_ltwrapper_scriptname_result else func_stripname '' '.exe' "$file" wrapper=$func_stripname_result fi ;; *) wrapper=$file ;; esac if func_ltwrapper_script_p "$wrapper"; then notinst_deplibs= relink_command= func_source "$wrapper" # Check the variables that should have been set. test -z "$generated_by_libtool_version" && \ func_fatal_error "invalid libtool wrapper script \`$wrapper'" finalize=yes for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then func_source "$lib" fi libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then func_warning "\`$lib' has not been installed in \`$libdir'" finalize=no fi done relink_command= func_source "$wrapper" outputname= if test "$fast_install" = no && test -n "$relink_command"; then $opt_dry_run || { if test "$finalize" = yes; then tmpdir=`func_mktempdir` func_basename "$file$stripped_ext" file="$func_basename_result" outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` $opt_silent || { func_quote_for_expand "$relink_command" eval "func_echo $func_quote_for_expand_result" } if eval "$relink_command"; then : else func_error "error: relink \`$file' with the above command before installing it" $opt_dry_run || ${RM}r "$tmpdir" continue fi file="$outputname" else func_warning "cannot relink \`$file'" fi } else # Install the binary that we compiled earlier. file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyway case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok ;; *.exe:*) destfile=$destfile.exe ;; *:*.exe) func_stripname '' '.exe' "$destfile" destfile=$func_stripname_result ;; esac ;; esac func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' $opt_dry_run || if test -n "$outputname"; then ${RM}r "$tmpdir" fi ;; esac done for file in $staticlibs; do func_basename "$file" name="$func_basename_result" # Set up the ranlib parameters. oldlib="$destdir/$name" func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 tool_oldlib=$func_to_tool_file_result func_show_eval "$install_prog \$file \$oldlib" 'exit $?' if test -n "$stripme" && test -n "$old_striplib"; then func_show_eval "$old_striplib $tool_oldlib" 'exit $?' fi # Do each command in the postinstall commands. func_execute_cmds "$old_postinstall_cmds" 'exit $?' done test -n "$future_libdirs" && \ func_warning "remember to run \`$progname --finish$future_libdirs'" if test -n "$current_libdirs"; then # Maybe just do a dry run. $opt_dry_run && current_libdirs=" -n$current_libdirs" exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' else exit $EXIT_SUCCESS fi } test "$opt_mode" = install && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p # Extract symbols from dlprefiles and create ${outputname}S.o with # a dlpreopen symbol table. func_generate_dlsyms () { $opt_debug my_outputname="$1" my_originator="$2" my_pic_p="${3-no}" my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` my_dlsyms= if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then if test -n "$NM" && test -n "$global_symbol_pipe"; then my_dlsyms="${my_outputname}S.c" else func_error "not configured to extract global symbols from dlpreopened files" fi fi if test -n "$my_dlsyms"; then case $my_dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. nlist="$output_objdir/${my_outputname}.nm" func_show_eval "$RM $nlist ${nlist}S ${nlist}T" # Parse the name list into a source file. func_verbose "creating $output_objdir/$my_dlsyms" $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ #ifdef __cplusplus extern \"C\" { #endif #if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) #pragma GCC diagnostic ignored \"-Wstrict-prototypes\" #endif /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif /* External symbol declarations for the compiler. */\ " if test "$dlself" = yes; then func_verbose "generating symbol list for \`$output'" $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` for progfile in $progfiles; do func_to_tool_file "$progfile" func_convert_file_msys_to_w32 func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then $opt_dry_run || { eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi if test -n "$export_symbols_regex"; then $opt_dry_run || { eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi # Prepare the list of exported symbols if test -z "$export_symbols"; then export_symbols="$output_objdir/$outputname.exp" $opt_dry_run || { $RM $export_symbols eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ;; esac } else $opt_dry_run || { eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; esac } fi fi for dlprefile in $dlprefiles; do func_verbose "extracting global C symbols from \`$dlprefile'" func_basename "$dlprefile" name="$func_basename_result" case $host in *cygwin* | *mingw* | *cegcc* ) # if an import library, we need to obtain dlname if func_win32_import_lib_p "$dlprefile"; then func_tr_sh "$dlprefile" eval "curr_lafile=\$libfile_$func_tr_sh_result" dlprefile_dlbasename="" if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then # Use subshell, to avoid clobbering current variable values dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` if test -n "$dlprefile_dlname" ; then func_basename "$dlprefile_dlname" dlprefile_dlbasename="$func_basename_result" else # no lafile. user explicitly requested -dlpreopen . $sharedlib_from_linklib_cmd "$dlprefile" dlprefile_dlbasename=$sharedlib_from_linklib_result fi fi $opt_dry_run || { if test -n "$dlprefile_dlbasename" ; then eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' else func_warning "Could not compute DLL name from $name" eval '$ECHO ": $name " >> "$nlist"' fi func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" } else # not an import lib $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } fi ;; *) $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } ;; esac done $opt_dry_run || { # Make sure we have at least an empty file. test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $MV "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. if $GREP -v "^: " < "$nlist" | if sort -k 3 /dev/null 2>&1; then sort -k 3 else sort +2 fi | uniq > "$nlist"S; then : else $GREP -v "^: " < "$nlist" > "$nlist"S fi if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' else echo '/* NONE */' >> "$output_objdir/$my_dlsyms" fi echo >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ typedef struct { const char *name; void *address; } lt_dlsymlist; extern LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[]; LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = {\ { \"$my_originator\", (void *) 0 }," case $need_lib_prefix in no) eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; *) eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; esac echo >> "$output_objdir/$my_dlsyms" "\ {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt_${my_prefix}_LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif\ " } # !$opt_dry_run pic_flag_for_symtable= case "$compile_command " in *" -static "*) ;; *) case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; *-*-hpux*) pic_flag_for_symtable=" $pic_flag" ;; *) if test "X$my_pic_p" != Xno; then pic_flag_for_symtable=" $pic_flag" fi ;; esac ;; esac symtab_cflags= for arg in $LTCFLAGS; do case $arg in -pie | -fpie | -fPIE) ;; *) func_append symtab_cflags " $arg" ;; esac done # Now compile the dynamic symbol file. func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' # Clean up the generated files. func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' # Transform the symbol file into the correct name. symfileobj="$output_objdir/${my_outputname}S.$objext" case $host in *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` else compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` fi ;; *) compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` ;; esac ;; *) func_fatal_error "unknown suffix for \`$my_dlsyms'" ;; esac else # We keep going just in case the user didn't refer to # lt_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. # Nullify the symbol file. compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` fi } # func_win32_libid arg # return the library type of file 'arg' # # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. # Despite the name, also deal with 64 bit binaries. func_win32_libid () { $opt_debug win32_libid_type="unknown" win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in *ar\ archive\ import\ library*) # definitely import win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then func_to_tool_file "$1" func_convert_file_msys_to_w32 win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | $SED -n -e ' 1,100{ / I /{ s,.*,import, p q } }'` case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; esac fi ;; *DLL*) win32_libid_type="x86 DLL" ;; *executable*) # but shell scripts are "executable" too... case $win32_fileres in *MS\ Windows\ PE\ Intel*) win32_libid_type="x86 DLL" ;; esac ;; esac $ECHO "$win32_libid_type" } # func_cygming_dll_for_implib ARG # # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib () { $opt_debug sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` } # func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs # # The is the core of a fallback implementation of a # platform-specific function to extract the name of the # DLL associated with the specified import library LIBNAME. # # SECTION_NAME is either .idata$6 or .idata$7, depending # on the platform and compiler that created the implib. # # Echos the name of the DLL associated with the # specified import library. func_cygming_dll_for_implib_fallback_core () { $opt_debug match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` $OBJDUMP -s --section "$1" "$2" 2>/dev/null | $SED '/^Contents of section '"$match_literal"':/{ # Place marker at beginning of archive member dllname section s/.*/====MARK====/ p d } # These lines can sometimes be longer than 43 characters, but # are always uninteresting /:[ ]*file format pe[i]\{,1\}-/d /^In archive [^:]*:/d # Ensure marker is printed /^====MARK====/p # Remove all lines with less than 43 characters /^.\{43\}/!d # From remaining lines, remove first 43 characters s/^.\{43\}//' | $SED -n ' # Join marker and all lines until next marker into a single line /^====MARK====/ b para H $ b para b :para x s/\n//g # Remove the marker s/^====MARK====// # Remove trailing dots and whitespace s/[\. \t]*$// # Print /./p' | # we now have a list, one entry per line, of the stringified # contents of the appropriate section of all members of the # archive which possess that section. Heuristic: eliminate # all those which have a first or second character that is # a '.' (that is, objdump's representation of an unprintable # character.) This should work for all archives with less than # 0x302f exports -- but will fail for DLLs whose name actually # begins with a literal '.' or a single character followed by # a '.'. # # Of those that remain, print the first one. $SED -e '/^\./d;/^.\./d;q' } # func_cygming_gnu_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is a GNU/binutils-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_gnu_implib_p () { $opt_debug func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` test -n "$func_cygming_gnu_implib_tmp" } # func_cygming_ms_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is an MS-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_ms_implib_p () { $opt_debug func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` test -n "$func_cygming_ms_implib_tmp" } # func_cygming_dll_for_implib_fallback ARG # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # # This fallback implementation is for use when $DLLTOOL # does not support the --identify-strict option. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib_fallback () { $opt_debug if func_cygming_gnu_implib_p "$1" ; then # binutils import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` elif func_cygming_ms_implib_p "$1" ; then # ms-generated import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` else # unknown sharedlib_from_linklib_result="" fi } # func_extract_an_archive dir oldlib func_extract_an_archive () { $opt_debug f_ex_an_ar_dir="$1"; shift f_ex_an_ar_oldlib="$1" if test "$lock_old_archive_extraction" = yes; then lockfile=$f_ex_an_ar_oldlib.lock until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done fi func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ 'stat=$?; rm -f "$lockfile"; exit $stat' if test "$lock_old_archive_extraction" = yes; then $opt_dry_run || rm -f "$lockfile" fi if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" fi } # func_extract_archives gentop oldlib ... func_extract_archives () { $opt_debug my_gentop="$1"; shift my_oldlibs=${1+"$@"} my_oldobjs="" my_xlib="" my_xabs="" my_xdir="" for my_xlib in $my_oldlibs; do # Extract the objects. case $my_xlib in [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac func_basename "$my_xlib" my_xlib="$func_basename_result" my_xlib_u=$my_xlib while :; do case " $extracted_archives " in *" $my_xlib_u "*) func_arith $extracted_serial + 1 extracted_serial=$func_arith_result my_xlib_u=lt$extracted_serial-$my_xlib ;; *) break ;; esac done extracted_archives="$extracted_archives $my_xlib_u" my_xdir="$my_gentop/$my_xlib_u" func_mkdir_p "$my_xdir" case $host in *-darwin*) func_verbose "Extracting $my_xabs" # Do not bother doing anything if just a dry run $opt_dry_run || { darwin_orig_dir=`pwd` cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` darwin_base_archive=`basename "$darwin_archive"` darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` if test -n "$darwin_arches"; then darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" for darwin_arch in $darwin_arches ; do func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" func_extract_an_archive "`pwd`" "${darwin_base_archive}" cd "$darwin_curdir" $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" done # $darwin_arches ## Okay now we've a bunch of thin objects, gotta fatten them up :) darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` darwin_file= darwin_files= for darwin_file in $darwin_filelist; do darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` $LIPO -create -output "$darwin_file" $darwin_files done # $darwin_filelist $RM -rf unfat-$$ cd "$darwin_orig_dir" else cd $darwin_orig_dir func_extract_an_archive "$my_xdir" "$my_xabs" fi # $darwin_arches } # !$opt_dry_run ;; *) func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` done func_extract_archives_result="$my_oldobjs" } # func_emit_wrapper [arg=no] # # Emit a libtool wrapper script on stdout. # Don't directly open a file because we may want to # incorporate the script contents within a cygwin/mingw # wrapper executable. Must ONLY be called from within # func_mode_link because it depends on a number of variables # set therein. # # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR # variable will take. If 'yes', then the emitted script # will assume that the directory in which it is stored is # the $objdir directory. This is a cygwin/mingw-specific # behavior. func_emit_wrapper () { func_emit_wrapper_arg1=${1-no} $ECHO "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of the build directory. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. sed_quote_subst='$sed_quote_subst' # Be Bourne compatible if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variables: generated_by_libtool_version='$macro_version' notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$ECHO are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then file=\"\$0\"" qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` $ECHO "\ # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$1 _LTECHO_EOF' } ECHO=\"$qECHO\" fi # Very basic option parsing. These options are (a) specific to # the libtool wrapper, (b) are identical between the wrapper # /script/ and the wrapper /executable/ which is used only on # windows platforms, and (c) all begin with the string "--lt-" # (application programs are unlikely to have options which match # this pattern). # # There are only two supported options: --lt-debug and # --lt-dump-script. There is, deliberately, no --lt-help. # # The first argument to this parsing function should be the # script's $0 value, followed by "$@". lt_option_debug= func_parse_lt_options () { lt_script_arg0=\$0 shift for lt_opt do case \"\$lt_opt\" in --lt-debug) lt_option_debug=1 ;; --lt-dump-script) lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` cat \"\$lt_dump_D/\$lt_dump_F\" exit 0 ;; --lt-*) \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 exit 1 ;; esac done # Print the debug banner immediately: if test -n \"\$lt_option_debug\"; then echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 fi } # Used when --lt-debug. Prints its arguments to stdout # (redirection is the responsibility of the caller) func_lt_dump_args () { lt_dump_args_N=1; for lt_arg do \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` done } # Core function for launching the target application func_exec_program_core () { " case $host in # Backslashes separate directories on plain windows *-*-mingw | *-*-os2* | *-cegcc*) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} " ;; *) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir/\$program\" \${1+\"\$@\"} " ;; esac $ECHO "\ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 exit 1 } # A function to encapsulate launching the target application # Strips options in the --lt-* namespace from \$@ and # launches target application with the remaining arguments. func_exec_program () { case \" \$* \" in *\\ --lt-*) for lt_wr_arg do case \$lt_wr_arg in --lt-*) ;; *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; esac shift done ;; esac func_exec_program_core \${1+\"\$@\"} } # Parse options func_parse_lt_options \"\$0\" \${1+\"\$@\"} # Find the directory that this script lives in. thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` done # Usually 'no', except on cygwin/mingw when embedded into # the cwrapper. WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then # special case for '.' if test \"\$thisdir\" = \".\"; then thisdir=\`pwd\` fi # remove .libs from thisdir case \"\$thisdir\" in *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; $objdir ) thisdir=. ;; esac fi # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" " if test "$fast_install" = yes; then $ECHO "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" if test ! -d \"\$progdir\"; then $MKDIR \"\$progdir\" else $RM \"\$progdir/\$file\" fi" $ECHO "\ # relink executable if necessary if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else $ECHO \"\$relink_command_output\" >&2 $RM \"\$progdir/\$file\" exit 1 fi fi $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || { $RM \"\$progdir/\$program\"; $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } $RM \"\$progdir/\$file\" fi" else $ECHO "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi $ECHO "\ if test -f \"\$progdir/\$program\"; then" # fixup the dll searchpath if we need to. # # Fix the DLL searchpath if we need to. Do this before prepending # to shlibpath, because on Windows, both are PATH and uninstalled # libraries must come first. if test -n "$dllsearchpath"; then $ECHO "\ # Add the dll search path components to the executable PATH PATH=$dllsearchpath:\$PATH " fi # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` export $shlibpath_var " fi $ECHO "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. func_exec_program \${1+\"\$@\"} fi else # The program doesn't exist. \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi fi\ " } # func_emit_cwrapperexe_src # emit the source code for a wrapper executable on stdout # Must ONLY be called from within func_mode_link because # it depends on a number of variable set therein. func_emit_cwrapperexe_src () { cat < #include #ifdef _MSC_VER # include # include # include #else # include # include # ifdef __CYGWIN__ # include # endif #endif #include #include #include #include #include #include #include #include /* declarations of non-ANSI functions */ #if defined(__MINGW32__) # ifdef __STRICT_ANSI__ int _putenv (const char *); # endif #elif defined(__CYGWIN__) # ifdef __STRICT_ANSI__ char *realpath (const char *, char *); int putenv (char *); int setenv (const char *, const char *, int); # endif /* #elif defined (other platforms) ... */ #endif /* portability defines, excluding path handling macros */ #if defined(_MSC_VER) # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv # define S_IXUSR _S_IEXEC # ifndef _INTPTR_T_DEFINED # define _INTPTR_T_DEFINED # define intptr_t int # endif #elif defined(__MINGW32__) # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv #elif defined(__CYGWIN__) # define HAVE_SETENV # define FOPEN_WB "wb" /* #elif defined (other platforms) ... */ #endif #if defined(PATH_MAX) # define LT_PATHMAX PATH_MAX #elif defined(MAXPATHLEN) # define LT_PATHMAX MAXPATHLEN #else # define LT_PATHMAX 1024 #endif #ifndef S_IXOTH # define S_IXOTH 0 #endif #ifndef S_IXGRP # define S_IXGRP 0 #endif /* path handling portability macros */ #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' #endif #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ defined (__OS2__) # define HAVE_DOS_BASED_FILE_SYSTEM # define FOPEN_WB "wb" # ifndef DIR_SEPARATOR_2 # define DIR_SEPARATOR_2 '\\' # endif # ifndef PATH_SEPARATOR_2 # define PATH_SEPARATOR_2 ';' # endif #endif #ifndef DIR_SEPARATOR_2 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) #else /* DIR_SEPARATOR_2 */ # define IS_DIR_SEPARATOR(ch) \ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) #endif /* DIR_SEPARATOR_2 */ #ifndef PATH_SEPARATOR_2 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) #else /* PATH_SEPARATOR_2 */ # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ #ifndef FOPEN_WB # define FOPEN_WB "w" #endif #ifndef _O_BINARY # define _O_BINARY 0 #endif #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ if (stale) { free ((void *) stale); stale = 0; } \ } while (0) #if defined(LT_DEBUGWRAPPER) static int lt_debug = 1; #else static int lt_debug = 0; #endif const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ void *xmalloc (size_t num); char *xstrdup (const char *string); const char *base_name (const char *name); char *find_executable (const char *wrapper); char *chase_symlinks (const char *pathspec); int make_executable (const char *path); int check_executable (const char *path); char *strendzap (char *str, const char *pat); void lt_debugprintf (const char *file, int line, const char *fmt, ...); void lt_fatal (const char *file, int line, const char *message, ...); static const char *nonnull (const char *s); static const char *nonempty (const char *s); void lt_setenv (const char *name, const char *value); char *lt_extend_str (const char *orig_value, const char *add, int to_end); void lt_update_exe_path (const char *name, const char *value); void lt_update_lib_path (const char *name, const char *value); char **prepare_spawn (char **argv); void lt_dump_script (FILE *f); EOF cat <= 0) && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) return 1; else return 0; } int make_executable (const char *path) { int rval = 0; struct stat st; lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", nonempty (path)); if ((!path) || (!*path)) return 0; if (stat (path, &st) >= 0) { rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); } return rval; } /* Searches for the full path of the wrapper. Returns newly allocated full path name if found, NULL otherwise Does not chase symlinks, even on platforms that support them. */ char * find_executable (const char *wrapper) { int has_slash = 0; const char *p; const char *p_next; /* static buffer for getcwd */ char tmp[LT_PATHMAX + 1]; int tmp_len; char *concat_name; lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", nonempty (wrapper)); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; /* Absolute path? */ #if defined (HAVE_DOS_BASED_FILE_SYSTEM) if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } else { #endif if (IS_DIR_SEPARATOR (wrapper[0])) { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } #if defined (HAVE_DOS_BASED_FILE_SYSTEM) } #endif for (p = wrapper; *p; p++) if (*p == '/') { has_slash = 1; break; } if (!has_slash) { /* no slashes; search PATH */ const char *path = getenv ("PATH"); if (path != NULL) { for (p = path; *p; p = p_next) { const char *q; size_t p_len; for (q = p; *q; q++) if (IS_PATH_SEPARATOR (*q)) break; p_len = q - p; p_next = (*q == '\0' ? q : q + 1); if (p_len == 0) { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); } else { concat_name = XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, p, p_len); concat_name[p_len] = '/'; strcpy (concat_name + p_len + 1, wrapper); } if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } } /* not found in PATH; assume curdir */ } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); return NULL; } char * chase_symlinks (const char *pathspec) { #ifndef S_ISLNK return xstrdup (pathspec); #else char buf[LT_PATHMAX]; struct stat s; char *tmp_pathspec = xstrdup (pathspec); char *p; int has_symlinks = 0; while (strlen (tmp_pathspec) && !has_symlinks) { lt_debugprintf (__FILE__, __LINE__, "checking path component for symlinks: %s\n", tmp_pathspec); if (lstat (tmp_pathspec, &s) == 0) { if (S_ISLNK (s.st_mode) != 0) { has_symlinks = 1; break; } /* search backwards for last DIR_SEPARATOR */ p = tmp_pathspec + strlen (tmp_pathspec) - 1; while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) p--; if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) { /* no more DIR_SEPARATORS left */ break; } *p = '\0'; } else { lt_fatal (__FILE__, __LINE__, "error accessing file \"%s\": %s", tmp_pathspec, nonnull (strerror (errno))); } } XFREE (tmp_pathspec); if (!has_symlinks) { return xstrdup (pathspec); } tmp_pathspec = realpath (pathspec, buf); if (tmp_pathspec == 0) { lt_fatal (__FILE__, __LINE__, "could not follow symlinks for %s", pathspec); } return xstrdup (tmp_pathspec); #endif } char * strendzap (char *str, const char *pat) { size_t len, patlen; assert (str != NULL); assert (pat != NULL); len = strlen (str); patlen = strlen (pat); if (patlen <= len) { str += len - patlen; if (strcmp (str, pat) == 0) *str = '\0'; } return str; } void lt_debugprintf (const char *file, int line, const char *fmt, ...) { va_list args; if (lt_debug) { (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); va_start (args, fmt); (void) vfprintf (stderr, fmt, args); va_end (args); } } static void lt_error_core (int exit_status, const char *file, int line, const char *mode, const char *message, va_list ap) { fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); if (exit_status >= 0) exit (exit_status); } void lt_fatal (const char *file, int line, const char *message, ...) { va_list ap; va_start (ap, message); lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); va_end (ap); } static const char * nonnull (const char *s) { return s ? s : "(null)"; } static const char * nonempty (const char *s) { return (s && !*s) ? "(empty)" : nonnull (s); } void lt_setenv (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_setenv) setting '%s' to '%s'\n", nonnull (name), nonnull (value)); { #ifdef HAVE_SETENV /* always make a copy, for consistency with !HAVE_SETENV */ char *str = xstrdup (value); setenv (name, str, 1); #else int len = strlen (name) + 1 + strlen (value) + 1; char *str = XMALLOC (char, len); sprintf (str, "%s=%s", name, value); if (putenv (str) != EXIT_SUCCESS) { XFREE (str); } #endif } } char * lt_extend_str (const char *orig_value, const char *add, int to_end) { char *new_value; if (orig_value && *orig_value) { int orig_value_len = strlen (orig_value); int add_len = strlen (add); new_value = XMALLOC (char, add_len + orig_value_len + 1); if (to_end) { strcpy (new_value, orig_value); strcpy (new_value + orig_value_len, add); } else { strcpy (new_value, add); strcpy (new_value + add_len, orig_value); } } else { new_value = xstrdup (add); } return new_value; } void lt_update_exe_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); /* some systems can't cope with a ':'-terminated path #' */ int len = strlen (new_value); while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) { new_value[len-1] = '\0'; } lt_setenv (name, new_value); XFREE (new_value); } } void lt_update_lib_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); lt_setenv (name, new_value); XFREE (new_value); } } EOF case $host_os in mingw*) cat <<"EOF" /* Prepares an argument vector before calling spawn(). Note that spawn() does not by itself call the command interpreter (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); GetVersionEx(&v); v.dwPlatformId == VER_PLATFORM_WIN32_NT; }) ? "cmd.exe" : "command.com"). Instead it simply concatenates the arguments, separated by ' ', and calls CreateProcess(). We must quote the arguments since Win32 CreateProcess() interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a special way: - Space and tab are interpreted as delimiters. They are not treated as delimiters if they are surrounded by double quotes: "...". - Unescaped double quotes are removed from the input. Their only effect is that within double quotes, space and tab are treated like normal characters. - Backslashes not followed by double quotes are not special. - But 2*n+1 backslashes followed by a double quote become n backslashes followed by a double quote (n >= 0): \" -> " \\\" -> \" \\\\\" -> \\" */ #define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" #define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" char ** prepare_spawn (char **argv) { size_t argc; char **new_argv; size_t i; /* Count number of arguments. */ for (argc = 0; argv[argc] != NULL; argc++) ; /* Allocate new argument vector. */ new_argv = XMALLOC (char *, argc + 1); /* Put quoted arguments into the new argument vector. */ for (i = 0; i < argc; i++) { const char *string = argv[i]; if (string[0] == '\0') new_argv[i] = xstrdup ("\"\""); else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) { int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); size_t length; unsigned int backslashes; const char *s; char *quoted_string; char *p; length = 0; backslashes = 0; if (quote_around) length++; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') length += backslashes + 1; length++; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) length += backslashes + 1; quoted_string = XMALLOC (char, length + 1); p = quoted_string; backslashes = 0; if (quote_around) *p++ = '"'; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') { unsigned int j; for (j = backslashes + 1; j > 0; j--) *p++ = '\\'; } *p++ = c; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) { unsigned int j; for (j = backslashes; j > 0; j--) *p++ = '\\'; *p++ = '"'; } *p = '\0'; new_argv[i] = quoted_string; } else new_argv[i] = (char *) string; } new_argv[argc] = NULL; return new_argv; } EOF ;; esac cat <<"EOF" void lt_dump_script (FILE* f) { EOF func_emit_wrapper yes | $SED -n -e ' s/^\(.\{79\}\)\(..*\)/\1\ \2/ h s/\([\\"]\)/\\\1/g s/$/\\n/ s/\([^\n]*\).*/ fputs ("\1", f);/p g D' cat <<"EOF" } EOF } # end: func_emit_cwrapperexe_src # func_win32_import_lib_p ARG # True if ARG is an import lib, as indicated by $file_magic_cmd func_win32_import_lib_p () { $opt_debug case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in *import*) : ;; *) false ;; esac } # func_mode_link arg... func_mode_link () { $opt_debug case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # which system we are compiling for in order to pass an extra # flag for every libtool invocation. # allow_undefined=no # FIXME: Unfortunately, there are problems with the above when trying # to make a dll which has undefined symbols, in which case not # even a static library is built. For now, we need to specify # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. allow_undefined=yes ;; *) allow_undefined=yes ;; esac libtool_args=$nonopt base_compile="$nonopt $@" compile_command=$nonopt finalize_command=$nonopt compile_rpath= finalize_rpath= compile_shlibpath= finalize_shlibpath= convenience= old_convenience= deplibs= old_deplibs= compiler_flags= linker_flags= dllsearchpath= lib_search_path=`pwd` inst_prefix_dir= new_inherited_linker_flags= avoid_version=no bindir= dlfiles= dlprefiles= dlself=no export_dynamic=no export_symbols= export_symbols_regex= generated= libobjs= ltlibs= module=no no_install=no objs= non_pic_objects= precious_files_regex= prefer_static_libs=no preload=no prev= prevarg= release= rpath= xrpath= perm_rpath= temp_rpath= thread_safe=no vinfo= vinfo_number=no weak_libs= single_module="${wl}-single_module" func_infer_tag $base_compile # We need to know -static, to get the right output filenames. for arg do case $arg in -shared) test "$build_libtool_libs" != yes && \ func_fatal_configuration "can not build a shared library" build_old_libs=no break ;; -all-static | -static | -static-libtool-libs) case $arg in -all-static) if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then func_warning "complete static linking is impossible in this configuration" fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; -static) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=built ;; -static-libtool-libs) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; esac build_libtool_libs=no build_old_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. while test "$#" -gt 0; do arg="$1" shift func_quote_for_eval "$arg" qarg=$func_quote_for_eval_unquoted_result func_append libtool_args " $func_quote_for_eval_result" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) func_append compile_command " @OUTPUT@" func_append finalize_command " @OUTPUT@" ;; esac case $prev in bindir) bindir="$arg" prev= continue ;; dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. func_append compile_command " @SYMFILE@" func_append finalize_command " @SYMFILE@" preload=yes fi case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test "$dlself" = no; then dlself=needless export_dynamic=yes fi prev= continue ;; self) if test "$prev" = dlprefiles; then dlself=yes elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then dlself=yes else dlself=needless export_dynamic=yes fi prev= continue ;; *) if test "$prev" = dlfiles; then func_append dlfiles " $arg" else func_append dlprefiles " $arg" fi prev= continue ;; esac ;; expsyms) export_symbols="$arg" test -f "$arg" \ || func_fatal_error "symbol file \`$arg' does not exist" prev= continue ;; expsyms_regex) export_symbols_regex="$arg" prev= continue ;; framework) case $host in *-*-darwin*) case "$deplibs " in *" $qarg.ltframework "*) ;; *) func_append deplibs " $qarg.ltframework" # this is fixed later ;; esac ;; esac prev= continue ;; inst_prefix) inst_prefix_dir="$arg" prev= continue ;; objectlist) if test -f "$arg"; then save_arg=$arg moreargs= for fil in `cat "$save_arg"` do # func_append moreargs " $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then func_append dlfiles " $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi done else func_fatal_error "link input file \`$arg' does not exist" fi arg=$save_arg prev= continue ;; precious_regex) precious_files_regex="$arg" prev= continue ;; release) release="-$arg" prev= continue ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; *) func_append rpath " $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; *) func_append xrpath " $arg" ;; esac fi prev= continue ;; shrext) shrext_cmds="$arg" prev= continue ;; weak) func_append weak_libs " $arg" prev= continue ;; xcclinker) func_append linker_flags " $qarg" func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xcompiler) func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xlinker) func_append linker_flags " $qarg" func_append compiler_flags " $wl$qarg" prev= func_append compile_command " $wl$qarg" func_append finalize_command " $wl$qarg" continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi # test -n "$prev" prevarg="$arg" case $arg in -all-static) if test -n "$link_static_flag"; then # See comment for -static flag below, for more details. func_append compile_command " $link_static_flag" func_append finalize_command " $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. func_fatal_error "\`-allow-undefined' must not be used because it is the default" ;; -avoid-version) avoid_version=yes continue ;; -bindir) prev=bindir continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) export_dynamic=yes continue ;; -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then func_fatal_error "more than one -exported-symbols argument is not allowed" fi if test "X$arg" = "X-export-symbols"; then prev=expsyms else prev=expsyms_regex fi continue ;; -framework) prev=framework continue ;; -inst-prefix-dir) prev=inst_prefix continue ;; # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix* | /*-*-irix*) func_append compile_command " $arg" func_append finalize_command " $arg" ;; esac continue ;; -L*) func_stripname "-L" '' "$arg" if test -z "$func_stripname_result"; then if test "$#" -gt 0; then func_fatal_error "require no space between \`-L' and \`$1'" else func_fatal_error "need path for \`-L' option" fi fi func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` test -z "$absdir" && \ func_fatal_error "cannot determine absolute directory name of \`$dir'" dir="$absdir" ;; esac case "$deplibs " in *" -L$dir "* | *" $arg "*) # Will only happen for absolute or sysroot arguments ;; *) # Preserve sysroot, but never include relative directories case $dir in [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; *) func_append deplibs " -L$dir" ;; esac func_append lib_search_path " $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; ::) dllsearchpath=$dir;; *) func_append dllsearchpath ":$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) func_append dllsearchpath ":$testbindir";; esac ;; esac continue ;; -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) # These systems don't actually have a C or math library (as such) continue ;; *-*-os2*) # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework func_append deplibs " System.ltframework" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype test "X$arg" = "X-lc" && continue ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work test "X$arg" = "X-lc" && continue ;; esac elif test "X$arg" = "X-lc_r"; then case $host in *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc_r directly, use -pthread flag. continue ;; esac fi func_append deplibs " $arg" continue ;; -module) module=yes continue ;; # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. # Darwin uses the -arch flag to determine output architecture. -model|-arch|-isysroot|--sysroot) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" prev=xcompiler continue ;; -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" case "$new_inherited_linker_flags " in *" $arg "*) ;; * ) func_append new_inherited_linker_flags " $arg" ;; esac continue ;; -multi_module) single_module="${wl}-multi_module" continue ;; -no-fast-install) fast_install=no continue ;; -no-install) case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. func_warning "\`-no-install' is ignored for $host" func_warning "assuming \`-no-fast-install' instead" fast_install=no ;; *) no_install=yes ;; esac continue ;; -no-undefined) allow_undefined=no continue ;; -objectlist) prev=objectlist continue ;; -o) prev=output ;; -precious-files-regex) prev=precious_regex continue ;; -release) prev=release continue ;; -rpath) prev=rpath continue ;; -R) prev=xrpath continue ;; -R*) func_stripname '-R' '' "$arg" dir=$func_stripname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; =*) func_stripname '=' '' "$dir" dir=$lt_sysroot$func_stripname_result ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in *" $dir "*) ;; *) func_append xrpath " $dir" ;; esac continue ;; -shared) # The effects of -shared are defined in a previous loop. continue ;; -shrext) prev=shrext continue ;; -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects # would be equivalent was wrong. It would break on at least # Digital Unix and AIX. continue ;; -thread-safe) thread_safe=yes continue ;; -version-info) prev=vinfo continue ;; -version-number) prev=vinfo vinfo_number=yes continue ;; -weak) prev=weak continue ;; -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" func_append arg " $func_quote_for_eval_result" func_append compiler_flags " $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Wl,*) func_stripname '-Wl,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" func_append arg " $wl$func_quote_for_eval_result" func_append compiler_flags " $wl$func_quote_for_eval_result" func_append linker_flags " $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Xcompiler) prev=xcompiler continue ;; -Xlinker) prev=xlinker continue ;; -XCClinker) prev=xcclinker continue ;; # -msg_* for osf cc -msg_*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; # Flags to be passed through unchanged, with rationale: # -64, -mips[0-9] enable 64-bit mode for the SGI compiler # -r[0-9][0-9]* specify processor for the SGI compiler # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler # +DA*, +DD* enable 64-bit mode for the HP compiler # -q* compiler args for the IBM compiler # -m*, -t[45]*, -txscale* architecture-specific flags for GCC # -F/path path to uninstalled frameworks, gcc on darwin # -p, -pg, --coverage, -fprofile-* profiling flags for GCC # @file GCC response files # -tp=* Portland pgcc target processor selection # --sysroot=* for sysroot support # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ -O*|-flto*|-fwhopr*|-fuse-linker-plugin) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" func_append compile_command " $arg" func_append finalize_command " $arg" func_append compiler_flags " $arg" continue ;; # Some other compiler flag. -* | +*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; *.$objext) # A standard object. func_append objs " $arg" ;; *.lo) # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then func_append dlfiles " $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi ;; *.$libext) # An archive. func_append deplibs " $arg" func_append old_deplibs " $arg" continue ;; *.la) # A libtool-controlled library. func_resolve_sysroot "$arg" if test "$prev" = dlfiles; then # This library was specified with -dlopen. func_append dlfiles " $func_resolve_sysroot_result" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. func_append dlprefiles " $func_resolve_sysroot_result" prev= else func_append deplibs " $func_resolve_sysroot_result" fi continue ;; # Some other compiler argument. *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then func_append compile_command " $arg" func_append finalize_command " $arg" fi done # argument parsing loop test -n "$prev" && \ func_fatal_help "the \`$prevarg' option requires an argument" if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" func_append compile_command " $arg" func_append finalize_command " $arg" fi oldlibs= # calculate the name of the file, without its directory func_basename "$output" outputname="$func_basename_result" libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" func_dirname "$output" "/" "" output_objdir="$func_dirname_result$objdir" func_to_tool_file "$output_objdir/" tool_output_objdir=$func_to_tool_file_result # Create the object directory. func_mkdir_p "$output_objdir" # Determine the type of output case $output in "") func_fatal_help "you must specify an output file" ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; *.la) linkmode=lib ;; *) linkmode=prog ;; # Anything else should be a program. esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do if $opt_preserve_dup_deps ; then case "$libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append libs " $deplib" done if test "$linkmode" = lib; then libs="$predeps $libs $compiler_lib_search_path $postdeps" # Compute libraries that are listed more than once in $predeps # $postdeps and mark them as special (i.e., whose duplicates are # not to be eliminated). pre_post_deps= if $opt_duplicate_compiler_generated_deps; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; esac func_append pre_post_deps " $pre_post_dep" done fi pre_post_deps= fi deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries notinst_path= # paths that contain not-installed libtool libraries case $linkmode in lib) passes="conv dlpreopen link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" ;; esac done ;; prog) compile_deplibs= finalize_deplibs= alldeplibs=no newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" ;; *) passes="conv" ;; esac for pass in $passes; do # The preopen pass in lib mode reverses $deplibs; put it back here # so that -L comes before libs that need it for instance... if test "$linkmode,$pass" = "lib,link"; then ## FIXME: Find the place where the list is rebuilt in the wrong ## order, and fix it there properly tmp_deplibs= for deplib in $deplibs; do tmp_deplibs="$deplib $tmp_deplibs" done deplibs="$tmp_deplibs" fi if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan"; then libs="$deplibs" deplibs= fi if test "$linkmode" = prog; then case $pass in dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; link) libs="$deplibs %DEPLIBS%" test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ;; esac fi if test "$linkmode,$pass" = "lib,dlpreopen"; then # Collect and forward deplibs of preopened libtool libs for lib in $dlprefiles; do # Ignore non-libtool-libs dependency_libs= func_resolve_sysroot "$lib" case $lib in *.la) func_source "$func_resolve_sysroot_result" ;; esac # Collect preopened libtool deplibs, except any this library # has declared as weak libs for deplib in $dependency_libs; do func_basename "$deplib" deplib_base=$func_basename_result case " $weak_libs " in *" $deplib_base "*) ;; *) func_append deplibs " $deplib" ;; esac done done libs="$dlprefiles" fi if test "$pass" = dlopen; then # Collect dlpreopened libraries save_deplibs="$deplibs" deplibs= fi for deplib in $libs; do lib= found=no case $deplib in -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append compiler_flags " $deplib" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi continue ;; -l*) if test "$linkmode" != lib && test "$linkmode" != prog; then func_warning "\`-l' is ignored for archives/objects" continue fi func_stripname '-l' '' "$deplib" name=$func_stripname_result if test "$linkmode" = lib; then searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" else searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" fi for searchdir in $searchdirs; do for search_ext in .la $std_shrext .so .a; do # Search the libtool library lib="$searchdir/lib${name}${search_ext}" if test -f "$lib"; then if test "$search_ext" = ".la"; then found=yes else found=no fi break 2 fi done done if test "$found" != yes; then # deplib doesn't seem to be a libtool library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue else # deplib is a libtool library # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, # We need to do some special things here, and not later. if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $deplib "*) if func_lalib_p "$lib"; then library_names= old_library= func_source "$lib" for l in $old_library $library_names; do ll="$l" done if test "X$ll" = "X$old_library" ; then # only static version available found=no func_dirname "$lib" "" "." ladir="$func_dirname_result" lib=$ladir/$old_library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue fi fi ;; *) ;; esac fi fi ;; # -l *.ltframework) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi continue ;; -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; prog) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi if test "$pass" = scan; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; *) func_warning "\`-L' is ignored for archives/objects" ;; esac # linkmode continue ;; # -L -R*) if test "$pass" = link; then func_stripname '-R' '' "$deplib" func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; *) func_append xrpath " $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; *.la) func_resolve_sysroot "$deplib" lib=$func_resolve_sysroot_result ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) # Linking convenience modules into shared libraries is allowed, # but linking other static libraries is non-portable. case " $dlpreconveniencelibs " in *" $deplib "*) ;; *) valid_a_lib=no case $deplibs_check_method in match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then valid_a_lib=yes fi ;; pass_all) valid_a_lib=yes ;; esac if test "$valid_a_lib" != yes; then echo $ECHO "*** Warning: Trying to link with static lib archive $deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because the file extensions .$libext of this argument makes me believe" echo "*** that it is just a static archive that I should not use here." else echo $ECHO "*** Warning: Linking the shared library $output against the" $ECHO "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" fi ;; esac continue ;; prog) if test "$pass" != link; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi continue ;; esac # linkmode ;; # *.$libext *.lo | *.$objext) if test "$pass" = conv; then deplibs="$deplib $deplibs" elif test "$linkmode" = prog; then if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. func_append newdlprefiles " $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append newdlfiles " $deplib" fi fi continue ;; %DEPLIBS%) alldeplibs=yes continue ;; esac # case $deplib if test "$found" = yes || test -f "$lib"; then : else func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" fi # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$lib" \ || func_fatal_error "\`$lib' is not a valid libtool archive" func_dirname "$lib" "" "." ladir="$func_dirname_result" dlname= dlopen= dlpreopen= libdir= library_names= old_library= inherited_linker_flags= # If the library was installed with an old release of libtool, # it will not redefine variables installed, or shouldnotlink installed=yes shouldnotlink=no avoidtemprpath= # Read the .la file func_source "$lib" # Convert "-framework foo" to "foo.ltframework" if test -n "$inherited_linker_flags"; then tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do case " $new_inherited_linker_flags " in *" $tmp_inherited_linker_flag "*) ;; *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; esac done fi dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then test -n "$dlopen" && func_append dlfiles " $dlopen" test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" fi if test "$pass" = conv; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # It is a libtool convenience library, so add in its objects. func_append convenience " $ladir/$objdir/$old_library" func_append old_convenience " $ladir/$objdir/$old_library" tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done elif test "$linkmode" != prog && test "$linkmode" != lib; then func_fatal_error "\`$lib' is not a convenience library" fi continue fi # $pass = conv # Get the name of the library we link against. linklib= if test -n "$old_library" && { test "$prefer_static_libs" = yes || test "$prefer_static_libs,$installed" = "built,no"; }; then linklib=$old_library else for l in $old_library $library_names; do linklib="$l" done fi if test -z "$linklib"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then func_fatal_error "cannot -dlopen a convenience library: \`$lib'" fi if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. func_append dlprefiles " $lib $dependency_libs" else func_append newdlfiles " $lib" fi continue fi # $pass = dlopen # We need an absolute path. case $ladir in [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then func_warning "cannot determine absolute directory name of \`$ladir'" func_warning "passing it literally to the linker, although it might fail" abs_ladir="$ladir" fi ;; esac func_basename "$lib" laname="$func_basename_result" # Find the relevant object directory and library name. if test "X$installed" = Xyes; then if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then func_warning "library \`$lib' was moved." dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else dir="$lt_sysroot$libdir" absdir="$lt_sysroot$libdir" fi test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then dir="$ladir" absdir="$abs_ladir" # Remove this search path later func_append notinst_path " $abs_ladir" else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later func_append notinst_path " $abs_ladir" fi fi # $installed = yes func_stripname 'lib' '.la' "$laname" name=$func_stripname_result # This library was specified with -dlpreopen. if test "$pass" = dlpreopen; then if test -z "$libdir" && test "$linkmode" = prog; then func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" fi case "$host" in # special handling for platforms with PE-DLLs. *cygwin* | *mingw* | *cegcc* ) # Linker will automatically link against shared library if both # static and shared are present. Therefore, ensure we extract # symbols from the import library if a shared library is present # (otherwise, the dlopen module name will be incorrect). We do # this by putting the import library name into $newdlprefiles. # We recover the dlopen module name by 'saving' the la file # name in a special purpose variable, and (later) extracting the # dlname from the la file. if test -n "$dlname"; then func_tr_sh "$dir/$linklib" eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" func_append newdlprefiles " $dir/$linklib" else func_append newdlprefiles " $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ func_append dlpreconveniencelibs " $dir/$old_library" fi ;; * ) # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then func_append newdlprefiles " $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ func_append dlpreconveniencelibs " $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then func_append newdlprefiles " $dir/$dlname" else func_append newdlprefiles " $dir/$linklib" fi ;; esac fi # $pass = dlpreopen if test -z "$libdir"; then # Link the convenience library if test "$linkmode" = lib; then deplibs="$dir/$old_library $deplibs" elif test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else deplibs="$lib $deplibs" # used for prog,scan pass fi continue fi if test "$linkmode" = prog && test "$pass" != link; then func_append newlib_search_path " $ladir" deplibs="$lib $deplibs" linkalldeplibs=no if test "$link_all_deplibs" != no || test -z "$library_names" || test "$build_libtool_libs" = no; then linkalldeplibs=yes fi tmp_libs= for deplib in $dependency_libs; do case $deplib in -L*) func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; esac # Need to link against all dependency_libs? if test "$linkalldeplibs" = yes; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done # for deplib continue fi # $linkmode = prog... if test "$linkmode,$pass" = "prog,link"; then if test -n "$library_names" && { { test "$prefer_static_libs" = no || test "$prefer_static_libs,$installed" = "built,yes"; } || test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then # Make sure the rpath contains only unique directories. case "$temp_rpath:" in *"$absdir:"*) ;; *) func_append temp_rpath "$absdir:" ;; esac fi # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) func_append compile_rpath " $absdir" ;; esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac ;; esac fi # $linkmode,$pass = prog,link... if test "$alldeplibs" = yes && { test "$deplibs_check_method" = pass_all || { test "$build_libtool_libs" = yes && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi fi link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs if test "$use_static_libs" = built && test "$installed" = yes; then use_static_libs=no fi if test -n "$library_names" && { test "$use_static_libs" = no || test -z "$old_library"; }; then case $host in *cygwin* | *mingw* | *cegcc*) # No point in relinking DLLs because paths are not encoded func_append notinst_deplibs " $lib" need_relink=no ;; *) if test "$installed" = no; then func_append notinst_deplibs " $lib" need_relink=yes fi ;; esac # This is a shared library # Warn about portability, can't link against -module's on some # systems (darwin). Don't bleat about dlopened modules though! dlopenmodule="" for dlpremoduletest in $dlprefiles; do if test "X$dlpremoduletest" = "X$lib"; then dlopenmodule="$dlpremoduletest" break fi done if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then echo if test "$linkmode" = prog; then $ECHO "*** Warning: Linking the executable $output against the loadable module" else $ECHO "*** Warning: Linking the shared library $output against the loadable module" fi $ECHO "*** $linklib is not portable!" fi if test "$linkmode" = lib && test "$hardcode_into_libs" = yes; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) func_append compile_rpath " $absdir" ;; esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac ;; esac fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names shift realname="$1" shift libname=`eval "\\$ECHO \"$libname_spec\""` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" elif test -n "$soname_spec"; then # bleh windows case $host in *cygwin* | mingw* | *cegcc*) func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; esac eval soname=\"$soname_spec\" else soname="$realname" fi # Make a new name for the extract_expsyms_cmds to use soroot="$soname" func_basename "$soroot" soname="$func_basename_result" func_stripname 'lib' '.dll' "$soname" newlib=libimp-$func_stripname_result.a # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else func_verbose "extracting exported symbol list from \`$soname'" func_execute_cmds "$extract_expsyms_cmds" 'exit $?' fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else func_verbose "generating import library for \`$soname'" func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" if test "$linkmode" = prog || test "$opt_mode" != relink; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) if test "$hardcode_direct" = no; then add="$dir/$linklib" case $host in *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; *-*-sysv4*uw2*) add_dir="-L$dir" ;; *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ *-*-unixware7*) add_dir="-L$dir" ;; *-*-darwin* ) # if the lib is a (non-dlopened) module then we can not # link against it, someone is ignoring the earlier warnings if /usr/bin/file -L $add 2> /dev/null | $GREP ": [^:]* bundle" >/dev/null ; then if test "X$dlopenmodule" != "X$lib"; then $ECHO "*** Warning: lib $linklib is a module, not a shared library" if test -z "$old_library" ; then echo echo "*** And there doesn't seem to be a static archive available" echo "*** The link will probably fail, sorry" else add="$dir/$old_library" fi elif test -n "$old_library"; then add="$dir/$old_library" fi fi esac elif test "$hardcode_minus_L" = no; then case $host in *-*-sunos*) add_shlibpath="$dir" ;; esac add_dir="-L$dir" add="-l$name" elif test "$hardcode_shlibpath_var" = no; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; relink) if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$absdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; *) lib_linked=no ;; esac if test "$lib_linked" != yes; then func_fatal_configuration "unsupported hardcode properties" fi if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; *) func_append compile_shlibpath "$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" if test "$hardcode_direct" != yes && test "$hardcode_minus_L" != yes && test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac fi fi fi if test "$linkmode" = prog || test "$opt_mode" = relink; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac add="-l$name" elif test "$hardcode_automatic" = yes; then if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then add="$inst_prefix_dir$libdir/$linklib" else add="$libdir/$linklib" fi else # We cannot seem to hardcode it, guess we'll fake it. add_dir="-L$libdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" fi if test "$linkmode" = prog; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" fi fi elif test "$linkmode" = prog; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test "$hardcode_direct" != unsupported; then test -n "$old_library" && linklib="$old_library" compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi elif test "$build_libtool_libs" = yes; then # Not a shared library if test "$deplibs_check_method" != pass_all; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. echo $ECHO "*** Warning: This system can not link to static lib archive $lib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then echo "*** But as you try to build a module library, libtool will still create " echo "*** a static module, that should work as long as the dlopening application" echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using \`nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi else deplibs="$dir/$old_library $deplibs" link_static=yes fi fi # link shared/static library? if test "$linkmode" = lib; then if test -n "$dependency_libs" && { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || test "$link_static" = yes; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do case $libdir in -R*) func_stripname '-R' '' "$libdir" temp_xrpath=$func_stripname_result case " $xrpath " in *" $temp_xrpath "*) ;; *) func_append xrpath " $temp_xrpath";; esac;; *) func_append temp_deplibs " $libdir";; esac done dependency_libs="$temp_deplibs" fi func_append newlib_search_path " $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" case $deplib in -L*) func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result";; *) func_resolve_sysroot "$deplib" ;; esac if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $func_resolve_sysroot_result "*) func_append specialdeplibs " $func_resolve_sysroot_result" ;; esac fi func_append tmp_libs " $func_resolve_sysroot_result" done if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do path= case $deplib in -L*) path="$deplib" ;; *.la) func_resolve_sysroot "$deplib" deplib=$func_resolve_sysroot_result func_dirname "$deplib" "" "." dir=$func_dirname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then func_warning "cannot determine absolute directory name of \`$dir'" absdir="$dir" fi ;; esac if $GREP "^installed=no" $deplib > /dev/null; then case $host in *-*-darwin*) depdepl= eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names" ; then for tmp in $deplibrary_names ; do depdepl=$tmp done if test -f "$absdir/$objdir/$depdepl" ; then depdepl="$absdir/$objdir/$depdepl" darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` if test -z "$darwin_install_name"; then darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` fi func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" path= fi fi ;; *) path="-L$absdir/$objdir" ;; esac else eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" test "$absdir" != "$libdir" && \ func_warning "\`$deplib' seems to be moved" path="-L$absdir" fi ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$path $deplibs" ;; esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs if test "$pass" = link; then if test "$linkmode" = "prog"; then compile_deplibs="$new_inherited_linker_flags $compile_deplibs" finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" else compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` fi fi dependency_libs="$newdependency_libs" if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi if test "$pass" != dlopen; then if test "$pass" != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; *) func_append lib_search_path " $dir" ;; esac done newlib_search_path= fi if test "$linkmode,$pass" != "prog,link"; then vars="deplibs" else vars="compile_deplibs finalize_deplibs" fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do # FIXME: Pedantically, this is the right thing to do, so # that some nasty dependency loop isn't accidentally # broken: #new_libs="$deplib $new_libs" # Pragmatically, this seems to cause very few problems in # practice: case $deplib in -L*) new_libs="$deplib $new_libs" ;; -R*) ;; *) # And here is the reason: when a library appears more # than once as an explicit dependence of a library, or # is implicitly linked in more than once by the # compiler, it is considered special, and multiple # occurrences thereof are not removed. Compare this # with having the same library being listed as a # dependency of multiple other libraries: in this case, # we know (pedantically, we assume) the library does not # need to be listed more than once, so we keep only the # last copy. This is not always right, but it is rare # enough that we require users that really mean to play # such unportable linking tricks to link the library # using -Wl,-lname, so that libtool does not consider it # for duplicate removal. case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$deplib $new_libs" ;; esac ;; esac ;; esac done tmp_libs= for deplib in $new_libs; do case $deplib in -L*) case " $tmp_libs " in *" $deplib "*) ;; *) func_append tmp_libs " $deplib" ;; esac ;; *) func_append tmp_libs " $deplib" ;; esac done eval $var=\"$tmp_libs\" done # for var fi # Last step: remove runtime libs from dependency_libs # (they stay in deplibs) tmp_libs= for i in $dependency_libs ; do case " $predeps $postdeps $compiler_lib_search_path " in *" $i "*) i="" ;; esac if test -n "$i" ; then func_append tmp_libs " $i" fi done dependency_libs=$tmp_libs done # for pass if test "$linkmode" = prog; then dlfiles="$newdlfiles" fi if test "$linkmode" = prog || test "$linkmode" = lib; then dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for archives" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for archives" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for archives" test -n "$xrpath" && \ func_warning "\`-R' is ignored for archives" test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for archives" test -n "$release" && \ func_warning "\`-release' is ignored for archives" test -n "$export_symbols$export_symbols_regex" && \ func_warning "\`-export-symbols' is ignored for archives" # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" func_append objs "$old_deplibs" ;; lib) # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) func_stripname 'lib' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) test "$module" = no && \ func_fatal_help "libtool library \`$output' must begin with \`lib'" if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required func_stripname '' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else func_stripname '' '.la' "$outputname" libname=$func_stripname_result fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" else echo $ECHO "*** Warning: Linking the shared library $output against the non-libtool" $ECHO "*** objects $objs is not portable!" func_append libobjs " $objs" fi fi test "$dlself" != no && \ func_warning "\`-dlopen self' is ignored for libtool libraries" set dummy $rpath shift test "$#" -gt 1 && \ func_warning "ignoring multiple \`-rpath's for a libtool library" install_libdir="$1" oldlibs= if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. # Some compilers have problems with a `.al' extension so # convenience libraries should have the same extension an # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for convenience libraries" test -n "$release" && \ func_warning "\`-release' is ignored for convenience libraries" else # Parse the version information argument. save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 shift IFS="$save_ifs" test -n "$7" && \ func_fatal_help "too many parameters to \`-version-info'" # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts # to make the code below a bit more comprehensible case $vinfo_number in yes) number_major="$1" number_minor="$2" number_revision="$3" # # There are really only two kinds -- those that # use the current revision as the major version # and those that subtract age and use age as # a minor version. But, then there is irix # which has an extra 1 added just for fun # case $version_type in # correct linux to gnu/linux during the next big refactor darwin|linux|osf|windows|none) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_revision" ;; freebsd-aout|freebsd-elf|qnx|sunos) current="$number_major" revision="$number_minor" age="0" ;; irix|nonstopux) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_minor" lt_irix_increment=no ;; *) func_fatal_configuration "$modename: unknown library version type \`$version_type'" ;; esac ;; no) current="$1" revision="$2" age="$3" ;; esac # Check that each of the things are valid numbers. case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "CURRENT \`$current' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "REVISION \`$revision' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "AGE \`$age' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac if test "$age" -gt "$current"; then func_error "AGE \`$age' is greater than the current interface number \`$current'" func_fatal_error "\`$vinfo' is not valid version information" fi # Calculate the version variables. major= versuffix= verstring= case $version_type in none) ;; darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... func_arith $current + 1 minor_current=$func_arith_result xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; freebsd-aout) major=".$current" versuffix=".$current.$revision"; ;; freebsd-elf) major=".$current" versuffix=".$current" ;; irix | nonstopux) if test "X$lt_irix_increment" = "Xno"; then func_arith $current - $age else func_arith $current - $age + 1 fi major=$func_arith_result case $version_type in nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; esac verstring="$verstring_prefix$major.$revision" # Add in all the interfaces that we are compatible with. loop=$revision while test "$loop" -ne 0; do func_arith $revision - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring_prefix$major.$iface:$verstring" done # Before this point, $major must not contain `.'. major=.$major versuffix="$major.$revision" ;; linux) # correct to gnu/linux during the next big refactor func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" ;; osf) func_arith $current - $age major=.$func_arith_result versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age while test "$loop" -ne 0; do func_arith $current - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring:${iface}.0" done # Make executables depend on our current version. func_append verstring ":${current}.0" ;; qnx) major=".$current" versuffix=".$current" ;; sunos) major=".$current" versuffix=".$current.$revision" ;; windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 filesystems. func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; *) func_fatal_configuration "unknown library version type \`$version_type'" ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely verstring= ;; *) verstring="0.0" ;; esac if test "$need_version" = no; then versuffix= else versuffix=".0.0" fi fi # Remove version info from name if versioning should be avoided if test "$avoid_version" = yes && test "$need_version" = no; then major= versuffix= verstring="" fi # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then func_warning "undefined symbols not allowed in $host shared libraries" build_libtool_libs=no build_old_libs=yes fi else # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi fi func_generate_dlsyms "$libname" "$libname" "yes" func_append libobjs " $symfileobj" test "X$libobjs" = "X " && libobjs= if test "$opt_mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= tempremovelist=`$ECHO "$output_objdir/*"` for p in $tempremovelist; do case $p in *.$objext | *.gcno) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) if test "X$precious_files_regex" != "X"; then if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 then continue fi fi func_append removelist " $p" ;; *) ;; esac done test -n "$removelist" && \ func_show_eval "${RM}r \$removelist" fi # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then func_append oldlibs " $output_objdir/$libname.$libext" # Transform .lo files to .o files. oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do func_replace_sysroot "$libdir" func_append temp_xrpath " -R$func_replace_sysroot_result" case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened old_dlfiles="$dlfiles" dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; *) func_append dlfiles " $lib" ;; esac done # Make sure dlprefiles contains only unique files old_dlprefiles="$dlprefiles" dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; *) func_append dlprefiles " $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework func_append deplibs " System.ltframework" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work ;; *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then func_append deplibs " -lc" fi ;; esac fi # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname release_save=$release versuffix_save=$versuffix major_save=$major # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? release="" versuffix="" major="" newdeplibs= droppeddeps=no case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just # implementing what was already the behavior. newdeplibs=$deplibs ;; test_compile) # This code stresses the "libraries are programs" paradigm to its # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. $opt_dry_run || $RM conftest.c cat > conftest.c </dev/null` $nocaseglob else potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` fi for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null | $GREP " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | $SED -e 10q | $EGREP "$file_magic_regex" > /dev/null; then func_append newdeplibs " $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a file magic. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. ;; match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` for a_deplib in $deplibs; do case $a_deplib in -l*) func_stripname -l '' "$a_deplib" name=$func_stripname_result if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) func_append newdeplibs " $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then libname=`eval "\\$ECHO \"$libname_spec\""` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ $EGREP "$match_pattern_regex" > /dev/null; then func_append newdeplibs " $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a regex pattern. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` done fi case $tmp_deplibs in *[!\ \ ]*) echo if test "X$deplibs_check_method" = "Xnone"; then echo "*** Warning: inter-library dependencies are not supported in this platform." else echo "*** Warning: inter-library dependencies are not known to be supported." fi echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes ;; esac ;; esac versuffix=$versuffix_save major=$major_save release=$release_save libname=$libname_save name=$name_save case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library with the System framework newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then echo echo "*** Warning: libtool could not satisfy all declared inter-library" $ECHO "*** dependencies of module $libname. Therefore, libtool will create" echo "*** a static module, that should work as long as the dlopening" echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using \`nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi else echo "*** The inter-library dependencies that have been dropped here will be" echo "*** automatically added whenever a program is linked with this library" echo "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then echo echo "*** Since this library must not contain undefined symbols," echo "*** because either the platform does not support them or" echo "*** it was explicitly requested with -no-undefined," echo "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi fi fi # Done checking deplibs! deplibs=$newdeplibs fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" case $host in *-*-darwin*) newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $deplibs " in *" -L$path/$objdir "*) func_append new_libs " -L$path/$objdir" ;; esac ;; esac done for deplib in $deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) func_append new_libs " $deplib" ;; esac ;; *) func_append new_libs " $deplib" ;; esac done deplibs="$new_libs" # All the library-specific variables (install_libdir is set above). library_names= old_library= dlname= # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then # Remove ${wl} instances when linking with ld. # FIXME: should test the right _cmds variable. case $archive_cmds in *\$LD\ *) wl= ;; esac if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" test "$opt_mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then func_replace_sysroot "$libdir" libdir=$func_replace_sysroot_result if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append dep_rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) func_append perm_rpath " $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do func_append rpath "$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi shlibpath="$finalize_shlibpath" test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi # Get the real and link names of the library. eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names shift realname="$1" shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname="$realname" fi if test -z "$dlname"; then dlname=$soname fi lib="$output_objdir/$realname" linknames= for link do func_append linknames " $link" done # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` test "X$libobjs" = "X " && libobjs= delfiles= if test -n "$export_symbols" && test -n "$include_expsyms"; then $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" export_symbols="$output_objdir/$libname.uexp" func_append delfiles " $export_symbols" fi orig_export_symbols= case $host_os in cygwin* | mingw* | cegcc*) if test -n "$export_symbols" && test -z "$export_symbols_regex"; then # exporting using user supplied symfile if test "x`$SED 1q $export_symbols`" != xEXPORTS; then # and it's NOT already a .def file. Must figure out # which of the given symbols are data symbols and tag # them as such. So, trigger use of export_symbols_cmds. # export_symbols gets reassigned inside the "prepare # the list of exported symbols" if statement, so the # include_expsyms logic still works. orig_export_symbols="$export_symbols" export_symbols= always_export_symbols=yes fi fi ;; esac # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' for cmd1 in $cmds; do IFS="$save_ifs" # Take the normal branch if the nm_file_list_spec branch # doesn't work or if tool conversion is not needed. case $nm_file_list_spec~$to_tool_file_cmd in *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) try_normal_branch=yes eval cmd=\"$cmd1\" func_len " $cmd" len=$func_len_result ;; *) try_normal_branch=no ;; esac if test "$try_normal_branch" = yes \ && { test "$len" -lt "$max_cmd_len" \ || test "$max_cmd_len" -le -1; } then func_show_eval "$cmd" 'exit $?' skipped_export=false elif test -n "$nm_file_list_spec"; then func_basename "$output" output_la=$func_basename_result save_libobjs=$libobjs save_output=$output output=${output_objdir}/${output_la}.nm func_to_tool_file "$output" libobjs=$nm_file_list_spec$func_to_tool_file_result func_append delfiles " $output" func_verbose "creating $NM input file list: $output" for obj in $save_libobjs; do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" done > "$output" eval cmd=\"$cmd1\" func_show_eval "$cmd" 'exit $?' output=$save_output libobjs=$save_libobjs skipped_export=false else # The command line is too long to execute in one step. func_verbose "using reloadable object file for export list..." skipped_export=: # Break out early, otherwise skipped_export may be # set to false by a later but shorter cmd. break fi done IFS="$save_ifs" if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi tmp_deplibs= for test_deplib in $deplibs; do case " $convenience " in *" $test_deplib "*) ;; *) func_append tmp_deplibs " $test_deplib" ;; esac done deplibs="$tmp_deplibs" if test -n "$convenience"; then if test -n "$whole_archive_flag_spec" && test "$compiler_needs_object" = yes && test -z "$libobjs"; then # extract the archives, so we have objects to list. # TODO: could optimize this to just extract one archive. whole_archive_flag_spec= fi if test -n "$whole_archive_flag_spec"; then save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= else gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $convenience func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" func_append linker_flags " $flag" fi # Make a backup of the uninstalled library when relinking if test "$opt_mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then eval test_cmds=\"$module_expsym_cmds\" cmds=$module_expsym_cmds else eval test_cmds=\"$module_cmds\" cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval test_cmds=\"$archive_expsym_cmds\" cmds=$archive_expsym_cmds else eval test_cmds=\"$archive_cmds\" cmds=$archive_cmds fi fi if test "X$skipped_export" != "X:" && func_len " $test_cmds" && len=$func_len_result && test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else # The command line is too long to link in one step, link piecewise # or, if using GNU ld and skipped_export is not :, use a linker # script. # Save the value of $output and $libobjs because we want to # use them later. If we have whole_archive_flag_spec, we # want to use save_libobjs as it was before # whole_archive_flag_spec was expanded, because we can't # assume the linker understands whole_archive_flag_spec. # This may have to be revisited, in case too many # convenience libraries get linked in and end up exceeding # the spec. if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then save_libobjs=$libobjs fi save_output=$output func_basename "$output" output_la=$func_basename_result # Clear the reloadable object creation command queue and # initialize k to one. test_cmds= concat_cmds= objlist= last_robj= k=1 if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then output=${output_objdir}/${output_la}.lnkscript func_verbose "creating GNU ld script: $output" echo 'INPUT (' > $output for obj in $save_libobjs do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" >> $output done echo ')' >> $output func_append delfiles " $output" func_to_tool_file "$output" output=$func_to_tool_file_result elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then output=${output_objdir}/${output_la}.lnk func_verbose "creating linker input file list: $output" : > $output set x $save_libobjs shift firstobj= if test "$compiler_needs_object" = yes; then firstobj="$1 " shift fi for obj do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" >> $output done func_append delfiles " $output" func_to_tool_file "$output" output=$firstobj\"$file_list_spec$func_to_tool_file_result\" else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." output=$output_objdir/$output_la-${k}.$objext eval test_cmds=\"$reload_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 # Loop over the list of objects to be linked. for obj in $save_libobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result if test "X$objlist" = X || test "$len" -lt "$max_cmd_len"; then func_append objlist " $obj" else # The command $test_cmds is almost too long, add a # command to the queue. if test "$k" -eq 1 ; then # The first file doesn't have a previous command to add. reload_objs=$objlist eval concat_cmds=\"$reload_cmds\" else # All subsequent reloadable object files will link in # the last one created. reload_objs="$objlist $last_robj" eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" fi last_robj=$output_objdir/$output_la-${k}.$objext func_arith $k + 1 k=$func_arith_result output=$output_objdir/$output_la-${k}.$objext objlist=" $obj" func_len " $last_robj" func_arith $len0 + $func_len_result len=$func_arith_result fi done # Handle the remaining objects by creating one last # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ reload_objs="$objlist $last_robj" eval concat_cmds=\"\${concat_cmds}$reload_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" fi func_append delfiles " $output" else output= fi if ${skipped_export-false}; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols libobjs=$output # Append the command to create the export file. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi fi test -n "$save_libobjs" && func_verbose "creating a temporary reloadable object file: $output" # Loop through the commands generated above and execute them. save_ifs="$IFS"; IFS='~' for cmd in $concat_cmds; do IFS="$save_ifs" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$opt_mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" if test -n "$export_symbols_regex" && ${skipped_export-false}; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi if ${skipped_export-false}; then if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi fi libobjs=$output # Restore the value of output. output=$save_output if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= fi # Expand the library linking commands again to reset the # value of $libobjs for piecewise linking. # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then cmds=$module_expsym_cmds else cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then cmds=$archive_expsym_cmds else cmds=$archive_cmds fi fi fi if test -n "$delfiles"; then # Append the command to remove temporary files to $cmds. eval cmds=\"\$cmds~\$RM $delfiles\" fi # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $dlprefiles func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$opt_mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$opt_mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then if test -z "$whole_archive_flag_spec"; then func_show_eval '${RM}r "$gentop"' fi fi exit $EXIT_SUCCESS fi # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' fi done # If -module or -export-dynamic was specified, set the dlname. if test "$module" = yes || test "$export_dynamic" = yes; then # On all known operating systems, these are identical. dlname="$soname" fi fi ;; obj) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for objects" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for objects" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for objects" test -n "$xrpath" && \ func_warning "\`-R' is ignored for objects" test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for objects" test -n "$release" && \ func_warning "\`-release' is ignored for objects" case $output in *.lo) test -n "$objs$old_deplibs" && \ func_fatal_error "cannot build library object \`$output' from non-libtool objects" libobj=$output func_lo2o "$libobj" obj=$func_lo2o_result ;; *) libobj= obj="$output" ;; esac # Delete the old objects. $opt_dry_run || $RM $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create # different ones for PIC/non-PIC, this we'll have to duplicate # the extraction. reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of # -Wl from whole_archive_flag_spec and hope we can get by with # turning comma into space.. wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` else gentop="$output_objdir/${obj}x" func_append generated " $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi # If we're not building shared, we need to use non_pic_objs test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" # Create the old-style object. reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" func_execute_cmds "$reload_cmds" 'exit $?' # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS fi if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. # $show "echo timestamp > $libobj" # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS fi if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" func_execute_cmds "$reload_cmds" 'exit $?' fi if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS ;; prog) case $host in *cygwin*) func_stripname '' '.exe' "$output" output=$func_stripname_result.exe;; esac test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for programs" test -n "$release" && \ func_warning "\`-release' is ignored for programs" test "$preload" = yes \ && test "$dlopen_support" = unknown \ && test "$dlopen_self" = unknown \ && test "$dlopen_self_static" = unknown && \ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac case $host in *-*-darwin*) # Don't allow lazy linking, it breaks C++ global constructors # But is supposedly fixed on 10.4 or later (yay!). if test "$tagname" = CXX ; then case ${MACOSX_DEPLOYMENT_TARGET-10.0} in 10.[0123]) func_append compile_command " ${wl}-bind_at_load" func_append finalize_command " ${wl}-bind_at_load" ;; esac fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $compile_deplibs " in *" -L$path/$objdir "*) func_append new_libs " -L$path/$objdir" ;; esac ;; esac done for deplib in $compile_deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) func_append new_libs " $deplib" ;; esac ;; *) func_append new_libs " $deplib" ;; esac done compile_deplibs="$new_libs" func_append compile_command " $compile_deplibs" func_append finalize_command " $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac done fi # Now hardcode the library paths rpath= hardcode_libdirs= for libdir in $compile_rpath $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) func_append perm_rpath " $libdir" ;; esac fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; ::) dllsearchpath=$libdir;; *) func_append dllsearchpath ":$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) func_append dllsearchpath ":$testbindir";; esac ;; esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi compile_rpath="$rpath" rpath= hardcode_libdirs= for libdir in $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; *) func_append finalize_perm_rpath " $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi finalize_rpath="$rpath" if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` fi func_generate_dlsyms "$outputname" "@PROGRAM@" "no" # template prelinking step if test -n "$prelink_cmds"; then func_execute_cmds "$prelink_cmds" 'exit $?' fi wrappers_required=yes case $host in *cegcc* | *mingw32ce*) # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. wrappers_required=no ;; *cygwin* | *mingw* ) if test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; *) if test "$need_relink" = no || test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; esac if test "$wrappers_required" = no; then # Replace the output file specification. compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. exit_status=0 func_show_eval "$link_command" 'exit_status=$?' if test -n "$postlink_cmds"; then func_to_tool_file "$output" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi # Delete the generated files. if test -f "$output_objdir/${outputname}S.${objext}"; then func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' fi exit $exit_status fi if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi if test -n "$finalize_shlibpath"; then finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" fi compile_var= finalize_var= if test -n "$runpath_var"; then if test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do func_append rpath "$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi if test -n "$finalize_perm_rpath"; then # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do func_append rpath "$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi fi if test "$no_install" = yes; then # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $opt_dry_run || $RM $output # Link the executable and exit func_show_eval "$link_command" 'exit $?' if test -n "$postlink_cmds"; then func_to_tool_file "$output" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi exit $EXIT_SUCCESS fi if test "$hardcode_action" = relink; then # Fast installation is not supported link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" func_warning "this platform does not like uninstalled shared libraries" func_warning "\`$output' will be relinked during installation" else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= fi else link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" fi fi # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname func_show_eval "$link_command" 'exit $?' if test -n "$postlink_cmds"; then func_to_tool_file "$output_objdir/$outputname" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi # Now create the wrapper script. func_verbose "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` fi # Only actually do things if not in dry run mode. $opt_dry_run || { # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in *.exe) func_stripname '' '.exe' "$output" output=$func_stripname_result ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe func_stripname '' '.exe' "$outputname" outputname=$func_stripname_result ;; *) exeext= ;; esac case $host in *cygwin* | *mingw* ) func_dirname_and_basename "$output" "" "." output_name=$func_basename_result output_path=$func_dirname_result cwrappersource="$output_path/$objdir/lt-$output_name.c" cwrapper="$output_path/$output_name.exe" $RM $cwrappersource $cwrapper trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 func_emit_cwrapperexe_src > $cwrappersource # The wrapper executable is built using the $host compiler, # because it contains $host paths and files. If cross- # compiling, it, like the target executable, must be # executed on the $host or under an emulation environment. $opt_dry_run || { $LTCC $LTCFLAGS -o $cwrapper $cwrappersource $STRIP $cwrapper } # Now, create the wrapper script for func_source use: func_ltwrapper_scriptname $cwrapper $RM $func_ltwrapper_scriptname_result trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 $opt_dry_run || { # note: this script will not be executed, so do not chmod. if test "x$build" = "x$host" ; then $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result else func_emit_wrapper no > $func_ltwrapper_scriptname_result fi } ;; * ) $RM $output trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 func_emit_wrapper no > $output chmod +x $output ;; esac } exit $EXIT_SUCCESS ;; esac # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then oldobjs="$libobjs_save $symfileobj" addlibs="$convenience" build_libtool_libs=no else if test "$build_libtool_libs" = module; then oldobjs="$libobjs_save" build_libtool_libs=no else oldobjs="$old_deplibs $non_pic_objects" if test "$preload" = yes && test -f "$symfileobj"; then func_append oldobjs " $symfileobj" fi fi addlibs="$old_convenience" fi if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $addlibs func_append oldobjs " $func_extract_archives_result" fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then cmds=$old_archive_from_new_cmds else # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $dlprefiles func_append oldobjs " $func_extract_archives_result" fi # POSIX demands no paths to be encoded in archives. We have # to avoid creating archives with duplicate basenames if we # might have to extract them afterwards, e.g., when creating a # static archive out of a convenience library, or when linking # the entirety of a libtool archive into another (currently # not supported by libtool). if (for obj in $oldobjs do func_basename "$obj" $ECHO "$func_basename_result" done | sort | sort -uc >/dev/null 2>&1); then : else echo "copying selected object files to avoid basename conflicts..." gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_mkdir_p "$gentop" save_oldobjs=$oldobjs oldobjs= counter=1 for obj in $save_oldobjs do func_basename "$obj" objbase="$func_basename_result" case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) while :; do # Make sure we don't pick an alternate name that also # overlaps. newobj=lt$counter-$objbase func_arith $counter + 1 counter=$func_arith_result case " $oldobjs " in *[\ /]"$newobj "*) ;; *) if test ! -f "$gentop/$newobj"; then break; fi ;; esac done func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" func_append oldobjs " $gentop/$newobj" ;; *) func_append oldobjs " $obj" ;; esac done fi func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 tool_oldlib=$func_to_tool_file_result eval cmds=\"$old_archive_cmds\" func_len " $cmds" len=$func_len_result if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds elif test -n "$archiver_list_spec"; then func_verbose "using command file archive linking..." for obj in $oldobjs do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" done > $output_objdir/$libname.libcmd func_to_tool_file "$output_objdir/$libname.libcmd" oldobjs=" $archiver_list_spec$func_to_tool_file_result" cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts func_verbose "using piecewise archive linking..." save_RANLIB=$RANLIB RANLIB=: objlist= concat_cmds= save_oldobjs=$oldobjs oldobjs= # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do last_oldobj=$obj done eval test_cmds=\"$old_archive_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 for obj in $save_oldobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result func_append objlist " $obj" if test "$len" -lt "$max_cmd_len"; then : else # the above command should be used before it gets too long oldobjs=$objlist if test "$obj" = "$last_oldobj" ; then RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" objlist= len=$len0 fi done RANLIB=$save_RANLIB oldobjs=$objlist if test "X$oldobjs" = "X" ; then eval cmds=\"\$concat_cmds\" else eval cmds=\"\$concat_cmds~\$old_archive_cmds\" fi fi fi func_execute_cmds "$cmds" 'exit $?' done test -n "$generated" && \ func_show_eval "${RM}r$generated" # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" func_verbose "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` if test "$hardcode_automatic" = yes ; then relink_command= fi # Only create the output if not a dry run. $opt_dry_run || { for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then break fi output="$output_objdir/$outputname"i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) func_basename "$deplib" name="$func_basename_result" func_resolve_sysroot "$deplib" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" ;; -L*) func_stripname -L '' "$deplib" func_replace_sysroot "$func_stripname_result" func_append newdependency_libs " -L$func_replace_sysroot_result" ;; -R*) func_stripname -R '' "$deplib" func_replace_sysroot "$func_stripname_result" func_append newdependency_libs " -R$func_replace_sysroot_result" ;; *) func_append newdependency_libs " $deplib" ;; esac done dependency_libs="$newdependency_libs" newdlfiles= for lib in $dlfiles; do case $lib in *.la) func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" ;; *) func_append newdlfiles " $lib" ;; esac done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in *.la) # Only pass preopened files to the pseudo-archive (for # eventual linking with the app. that links it) if we # didn't already link the preopened objects directly into # the library: func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" ;; esac done dlprefiles="$newdlprefiles" else newdlfiles= for lib in $dlfiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlfiles " $abs" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlprefiles " $abs" done dlprefiles="$newdlprefiles" fi $RM $output # place dlname in correct position for cygwin # In fact, it would be nice if we could use this code for all target # systems that can't hard-code library paths into their executables # and that have no shared library path variable independent of PATH, # but it turns out we can't easily determine that from inspecting # libtool variables, so we have to hard-code the OSs to which it # applies here; at the moment, that means platforms that use the PE # object format with DLL files. See the long comment at the top of # tests/bindir.at for full details. tdlname=$dlname case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) # If a -bindir argument was supplied, place the dll there. if test "x$bindir" != x ; then func_relative_path "$install_libdir" "$bindir" tdlname=$func_relative_path_result$dlname else # Otherwise fall back on heuristic. tdlname=../bin/$dlname fi ;; esac $ECHO > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='$tdlname' # Names of this library. library_names='$library_names' # The name of the static archive. old_library='$old_library' # Linker flags that can not go in dependency_libs. inherited_linker_flags='$new_inherited_linker_flags' # Libraries that this one depends upon. dependency_libs='$dependency_libs' # Names of additional weak libraries provided by this library weak_library_names='$weak_libs' # Version information for $libname. current=$current age=$age revision=$revision # Is this an already installed library? installed=$installed # Should we warn about portability when linking against -modules? shouldnotlink=$module # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test "$installed" = no && test "$need_relink" = yes; then $ECHO >> $output "\ relink_command=\"$relink_command\"" fi done } # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' ;; esac exit $EXIT_SUCCESS } { test "$opt_mode" = link || test "$opt_mode" = relink; } && func_mode_link ${1+"$@"} # func_mode_uninstall arg... func_mode_uninstall () { $opt_debug RM="$nonopt" files= rmforce= exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" for arg do case $arg in -f) func_append RM " $arg"; rmforce=yes ;; -*) func_append RM " $arg" ;; *) func_append files " $arg" ;; esac done test -z "$RM" && \ func_fatal_help "you must specify an RM program" rmdirs= for file in $files; do func_dirname "$file" "" "." dir="$func_dirname_result" if test "X$dir" = X.; then odir="$objdir" else odir="$dir/$objdir" fi func_basename "$file" name="$func_basename_result" test "$opt_mode" = uninstall && odir="$dir" # Remember odir for removal later, being careful to avoid duplicates if test "$opt_mode" = clean; then case " $rmdirs " in *" $odir "*) ;; *) func_append rmdirs " $odir" ;; esac fi # Don't error if the file doesn't exist and rm -f was used. if { test -L "$file"; } >/dev/null 2>&1 || { test -h "$file"; } >/dev/null 2>&1 || test -f "$file"; then : elif test -d "$file"; then exit_status=1 continue elif test "$rmforce" = yes; then continue fi rmfiles="$file" case $name in *.la) # Possibly a libtool archive, so verify it. if func_lalib_p "$file"; then func_source $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do func_append rmfiles " $odir/$n" done test -n "$old_library" && func_append rmfiles " $odir/$old_library" case "$opt_mode" in clean) case " $library_names " in *" $dlname "*) ;; *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; esac test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" ;; uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. ;; esac fi ;; *.lo) # Possibly a libtool object, so verify it. if func_lalib_p "$file"; then # Read the .lo file func_source $dir/$name # Add PIC object to the list of files to remove. if test -n "$pic_object" && test "$pic_object" != none; then func_append rmfiles " $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" && test "$non_pic_object" != none; then func_append rmfiles " $dir/$non_pic_object" fi fi ;; *) if test "$opt_mode" = clean ; then noexename=$name case $file in *.exe) func_stripname '' '.exe' "$file" file=$func_stripname_result func_stripname '' '.exe' "$name" noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe func_append rmfiles " $file" ;; esac # Do a test to see if this is a libtool program. if func_ltwrapper_p "$file"; then if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" relink_command= func_source $func_ltwrapper_scriptname_result func_append rmfiles " $func_ltwrapper_scriptname_result" else relink_command= func_source $dir/$noexename fi # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles func_append rmfiles " $odir/$name $odir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then func_append rmfiles " $odir/lt-$name" fi if test "X$noexename" != "X$name" ; then func_append rmfiles " $odir/lt-${noexename}.c" fi fi fi ;; esac func_show_eval "$RM $rmfiles" 'exit_status=1' done # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then func_show_eval "rmdir $dir >/dev/null 2>&1" fi done exit $exit_status } { test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && func_mode_uninstall ${1+"$@"} test -z "$opt_mode" && { help="$generic_help" func_fatal_help "you must specify a MODE" } test -z "$exec_cmd" && \ func_fatal_help "invalid operation mode \`$opt_mode'" if test -n "$exec_cmd"; then eval exec "$exec_cmd" exit $EXIT_FAILURE fi exit $exit_status # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting # choices, we go for a static library, that is the most portable, # since we can't tell whether shared libraries were disabled because # the user asked for that or because the platform doesn't support # them. This is particularly important on AIX, because we don't # support having both static and shared libraries enabled at the same # time on that platform, so we default to a shared-only configuration. # If a disable-shared tag is given, we'll fallback to a static-only # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared build_libtool_libs=no build_old_libs=yes # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: # vi:sw=2 parlatype-1.5.4/config.guess0000755000175000017500000012355013167645114013001 00000000000000#! /bin/sh # Attempt to guess a canonical system name. # Copyright 1992-2014 Free Software Foundation, Inc. timestamp='2014-03-23' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that # program. This Exception is an additional permission under section 7 # of the GNU General Public License, version 3 ("GPLv3"). # # Originally written by Per Bothner. # # You can get the latest version of this script from: # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD # # Please send patches with a ChangeLog entry to config-patches@gnu.org. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system \`$me' is run on. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright 1992-2014 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi trap 'exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; dummy=$tmp/dummy ; tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; case $CC_FOR_BUILD,$HOST_CC,$CC in ,,) echo "int x;" > $dummy.c ; for c in cc gcc c89 c99 ; do if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown case "${UNAME_SYSTEM}" in Linux|GNU|GNU/*) # If the system lacks a compiler, then just pick glibc. # We could probably try harder. LIBC=gnu eval $set_cc_for_build cat <<-EOF > $dummy.c #include #if defined(__UCLIBC__) LIBC=uclibc #elif defined(__dietlibc__) LIBC=dietlibc #else LIBC=gnu #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'` ;; esac # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` case "${UNAME_MACHINE_ARCH}" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; sh5el) machine=sh5le-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. case "${UNAME_MACHINE_ARCH}" in arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ELF__ then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. case "${UNAME_VERSION}" in Debian*) release='-gnu' ;; *) release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit ;; *:Bitrig:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE} exit ;; *:OpenBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} exit ;; *:ekkoBSD:*:*) echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} exit ;; *:SolidBSD:*:*) echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} exit ;; macppc:MirBSD:*:*) echo powerpc-unknown-mirbsd${UNAME_RELEASE} exit ;; *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ;; *5.*) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ;; esac # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU # types through head -n 1, so we only detect the type of CPU 0. ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") UNAME_MACHINE="alpha" ;; "EV4.5 (21064)") UNAME_MACHINE="alpha" ;; "LCA4 (21066/21068)") UNAME_MACHINE="alpha" ;; "EV5 (21164)") UNAME_MACHINE="alphaev5" ;; "EV5.6 (21164A)") UNAME_MACHINE="alphaev56" ;; "EV5.6 (21164PC)") UNAME_MACHINE="alphapca56" ;; "EV5.7 (21164PC)") UNAME_MACHINE="alphapca57" ;; "EV6 (21264)") UNAME_MACHINE="alphaev6" ;; "EV6.7 (21264A)") UNAME_MACHINE="alphaev67" ;; "EV6.8CB (21264C)") UNAME_MACHINE="alphaev68" ;; "EV6.8AL (21264B)") UNAME_MACHINE="alphaev68" ;; "EV6.8CX (21264D)") UNAME_MACHINE="alphaev68" ;; "EV6.9A (21264/EV69A)") UNAME_MACHINE="alphaev69" ;; "EV7 (21364)") UNAME_MACHINE="alphaev7" ;; "EV7.9 (21364A)") UNAME_MACHINE="alphaev79" ;; esac # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` # Reset EXIT trap before exiting to avoid spurious non-zero exit code. exitcode=$? trap '' 0 exit $exitcode ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix exit ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos exit ;; *:OS/390:*:*) echo i370-ibm-openedition exit ;; *:z/VM:*:*) echo s390-ibm-zvmoe exit ;; *:OS400:*:*) echo powerpc-ibm-os400 exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit ;; arm*:riscos:*:*|arm*:RISCOS:*:*) echo arm-unknown-riscos exit ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 exit ;; DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7; exit ;; esac ;; s390x:SunOS:*:*) echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) echo i386-pc-auroraux${UNAME_RELEASE} exit ;; i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) eval $set_cc_for_build SUN_ARCH="i386" # If there is a compiler, see if it is configured for 64-bit objects. # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. # This test works for both compilers. if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then SUN_ARCH="x86_64" fi fi echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` exit ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} ;; sun4) echo sparc-sun-sunos${UNAME_RELEASE} ;; esac exit ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit ;; m68k:machten:*:*) echo m68k-apple-machten${UNAME_RELEASE} exit ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} exit ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && SYSTEM_NAME=`$dummy $dummyarg` && { echo "$SYSTEM_NAME"; exit; } echo mips-mips-riscos${UNAME_RELEASE} exit ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax exit ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax exit ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ [ ${TARGET_BINARY_INTERFACE}x = x ] then echo m88k-dg-dgux${UNAME_RELEASE} else echo m88k-dg-dguxbcs${UNAME_RELEASE} fi else echo i586-dg-dgux${UNAME_RELEASE} fi exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` exit ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix exit ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} exit ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` then echo "$SYSTEM_NAME" else echo rs6000-ibm-aix3.2.5 fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit ;; *:AIX:*:[4567]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit ;; *:AIX:*:*) echo rs6000-ibm-aix exit ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "${sc_kernel_bits}" in 32) HP_ARCH="hppa2.0n" ;; 64) HP_ARCH="hppa2.0w" ;; '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 esac ;; esac fi if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac if [ ${HP_ARCH} = "hppa2.0w" ] then eval $set_cc_for_build # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler # generating 64-bit code. GNU and HP use different nomenclature: # # $ CC_FOR_BUILD=cc ./config.guess # => hppa2.0w-hp-hpux11.23 # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess # => hppa64-hp-hpux11.23 if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | grep -q __LP64__ then HP_ARCH="hppa2.0w" else HP_ARCH="hppa64" fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} exit ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } echo unknown-hitachi-hiuxwe2 exit ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd exit ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi exit ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; *:UNICOS/mp:*:*) echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; 5000:UNIX_System_V:4.*:*) FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} exit ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit ;; *:FreeBSD:*:*) UNAME_PROCESSOR=`/usr/bin/uname -p` case ${UNAME_PROCESSOR} in amd64) echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; *) echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; esac exit ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; *:MINGW64*:*) echo ${UNAME_MACHINE}-pc-mingw64 exit ;; *:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; *:MSYS*:*) echo ${UNAME_MACHINE}-pc-msys exit ;; i*:windows32*:*) # uname -m includes "-pc" on this system. echo ${UNAME_MACHINE}-mingw32 exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; *:Interix*:*) case ${UNAME_MACHINE} in x86) echo i586-pc-interix${UNAME_RELEASE} exit ;; authenticamd | genuineintel | EM64T) echo x86_64-unknown-interix${UNAME_RELEASE} exit ;; IA64) echo ia64-unknown-interix${UNAME_RELEASE} exit ;; esac ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit ;; 8664:Windows_NT:*) echo x86_64-pc-mks exit ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix exit ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit ;; amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) echo x86_64-unknown-cygwin exit ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin exit ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; *:GNU:*:*) # the GNU system echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit ;; *:GNU/*:*:*) # other systems with GNU libc and userland echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC} exit ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit ;; aarch64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; aarch64_be:Linux:*:*) UNAME_MACHINE=aarch64_be echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep -q ld.so.1 if test "$?" = 0 ; then LIBC="gnulibc1" ; fi echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; arc:Linux:*:* | arceb:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; arm*:Linux:*:*) eval $set_cc_for_build if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_EABI__ then echo ${UNAME_MACHINE}-unknown-linux-${LIBC} else if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_PCS_VFP then echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi else echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf fi fi exit ;; avr32*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; cris:Linux:*:*) echo ${UNAME_MACHINE}-axis-linux-${LIBC} exit ;; crisv32:Linux:*:*) echo ${UNAME_MACHINE}-axis-linux-${LIBC} exit ;; frv:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; hexagon:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; i*86:Linux:*:*) echo ${UNAME_MACHINE}-pc-linux-${LIBC} exit ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; m32r*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; mips:Linux:*:* | mips64:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef ${UNAME_MACHINE} #undef ${UNAME_MACHINE}el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=${UNAME_MACHINE}el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=${UNAME_MACHINE} #else CPU= #endif #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } ;; openrisc*:Linux:*:*) echo or1k-unknown-linux-${LIBC} exit ;; or32:Linux:*:* | or1k*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; padre:Linux:*:*) echo sparc-unknown-linux-${LIBC} exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-${LIBC} exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) echo hppa1.1-unknown-linux-${LIBC} ;; PA8*) echo hppa2.0-unknown-linux-${LIBC} ;; *) echo hppa-unknown-linux-${LIBC} ;; esac exit ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-${LIBC} exit ;; ppc:Linux:*:*) echo powerpc-unknown-linux-${LIBC} exit ;; ppc64le:Linux:*:*) echo powerpc64le-unknown-linux-${LIBC} exit ;; ppcle:Linux:*:*) echo powerpcle-unknown-linux-${LIBC} exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux-${LIBC} exit ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; tile*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; vax:Linux:*:*) echo ${UNAME_MACHINE}-dec-linux-${LIBC} exit ;; x86_64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; xtensa*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 exit ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx exit ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop exit ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos exit ;; i*86:syllable:*:*) echo ${UNAME_MACHINE}-pc-syllable exit ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp exit ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit ;; i*86:*:5:[678]*) # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} exit ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i586. # Note: whatever this is, it MUST be the same as what config.sub # prints for the "djgpp" host, or else GDB configury will decide that # this is a cross-build. echo i586-pc-msdosdjgpp exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit ;; paragon:*:*:*) echo i860-intel-osf1 exit ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi exit ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv exit ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix exit ;; M68*:*:R3V[5678]*:*) test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4; exit; } ;; NCR*:*:4.2:* | MPRAS*:*:4.2:*) OS_REL='.3' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 exit ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo ${UNAME_MACHINE}-sni-sysv4 else echo ns32k-sni-sysv fi exit ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit ;; i*86:VOS:*:*) # From Paul.Green@stratus.com. echo ${UNAME_MACHINE}-stratus-vos exit ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit ;; BePC:Haiku:*:*) # Haiku running on Intel PC compatible. echo i586-pc-haiku exit ;; x86_64:Haiku:*:*) echo x86_64-unknown-haiku exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit ;; SX-7:SUPER-UX:*:*) echo sx7-nec-superux${UNAME_RELEASE} exit ;; SX-8:SUPER-UX:*:*) echo sx8-nec-superux${UNAME_RELEASE} exit ;; SX-8R:SUPER-UX:*:*) echo sx8r-nec-superux${UNAME_RELEASE} exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit ;; *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown eval $set_cc_for_build if test "$UNAME_PROCESSOR" = unknown ; then UNAME_PROCESSOR=powerpc fi if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then case $UNAME_PROCESSOR in i386) UNAME_PROCESSOR=x86_64 ;; powerpc) UNAME_PROCESSOR=powerpc64 ;; esac fi fi elif test "$UNAME_PROCESSOR" = i386 ; then # Avoid executing cc on OS X 10.9, as it ships with a stub # that puts up a graphical alert prompting to install # developer tools. Any system running Mac OS X 10.7 or # later (Darwin 11 and later) is required to have a 64-bit # processor. This is not true of the ARM version of Darwin # that Apple uses in portable devices. UNAME_PROCESSOR=x86_64 fi echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} exit ;; *:QNX:*:4*) echo i386-pc-qnx exit ;; NEO-?:NONSTOP_KERNEL:*:*) echo neo-tandem-nsk${UNAME_RELEASE} exit ;; NSE-*:NONSTOP_KERNEL:*:*) echo nse-tandem-nsk${UNAME_RELEASE} exit ;; NSR-?:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux exit ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv exit ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} exit ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "$cputype" = "386"; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 exit ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit ;; *:TENEX:*:*) echo pdp10-unknown-tenex exit ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 exit ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 exit ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 exit ;; *:ITS:*:*) echo pdp10-unknown-its exit ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} exit ;; *:DragonFly:*:*) echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit ;; *:*VMS:*:*) UNAME_MACHINE=`(uname -p) 2>/dev/null` case "${UNAME_MACHINE}" in A*) echo alpha-dec-vms ; exit ;; I*) echo ia64-dec-vms ; exit ;; V*) echo vax-dec-vms ; exit ;; esac ;; *:XENIX:*:SysV) echo i386-pc-xenix exit ;; i*86:skyos:*:*) echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' exit ;; i*86:rdos:*:*) echo ${UNAME_MACHINE}-pc-rdos exit ;; i*86:AROS:*:*) echo ${UNAME_MACHINE}-pc-aros exit ;; x86_64:VMkernel:*:*) echo ${UNAME_MACHINE}-unknown-esx exit ;; esac cat >&2 < in order to provide the needed information to handle your system. config.guess timestamp = $timestamp uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = ${UNAME_MACHINE} UNAME_RELEASE = ${UNAME_RELEASE} UNAME_SYSTEM = ${UNAME_SYSTEM} UNAME_VERSION = ${UNAME_VERSION} EOF exit 1 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: parlatype-1.5.4/aclocal.m40000644000175000017500000017161013204324004012301 00000000000000# generated automatically by aclocal 1.14.1 -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, [m4_warning([this file was generated for autoconf 2.69. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically 'autoreconf'.])]) dnl GLIB_GSETTINGS dnl Defines GSETTINGS_SCHEMAS_INSTALL which controls whether dnl the schema should be compiled dnl AC_DEFUN([GLIB_GSETTINGS], [ m4_pattern_allow([AM_V_GEN]) AC_ARG_ENABLE(schemas-compile, AS_HELP_STRING([--disable-schemas-compile], [Disable regeneration of gschemas.compiled on install]), [case ${enableval} in yes) GSETTINGS_DISABLE_SCHEMAS_COMPILE="" ;; no) GSETTINGS_DISABLE_SCHEMAS_COMPILE="1" ;; *) AC_MSG_ERROR([bad value ${enableval} for --enable-schemas-compile]) ;; esac]) AC_SUBST([GSETTINGS_DISABLE_SCHEMAS_COMPILE]) PKG_PROG_PKG_CONFIG([0.16]) AC_SUBST(gsettingsschemadir, [${datadir}/glib-2.0/schemas]) if test x$cross_compiling != xyes; then GLIB_COMPILE_SCHEMAS=`$PKG_CONFIG --variable glib_compile_schemas gio-2.0` else AC_PATH_PROG(GLIB_COMPILE_SCHEMAS, glib-compile-schemas) fi AC_SUBST(GLIB_COMPILE_SCHEMAS) if test "x$GLIB_COMPILE_SCHEMAS" = "x"; then ifelse([$2],,[AC_MSG_ERROR([glib-compile-schemas not found.])],[$2]) else ifelse([$1],,[:],[$1]) fi GSETTINGS_RULES=' .PHONY : uninstall-gsettings-schemas install-gsettings-schemas clean-gsettings-schemas mostlyclean-am: clean-gsettings-schemas gsettings__enum_file = $(addsuffix .enums.xml,$(gsettings_ENUM_NAMESPACE)) %.gschema.valid: %.gschema.xml $(gsettings__enum_file) $(AM_V_GEN) $(GLIB_COMPILE_SCHEMAS) --strict --dry-run $(addprefix --schema-file=,$(gsettings__enum_file)) --schema-file=$< && mkdir -p [$](@D) && touch [$]@ all-am: $(gsettings_SCHEMAS:.xml=.valid) uninstall-am: uninstall-gsettings-schemas install-data-am: install-gsettings-schemas .SECONDARY: $(gsettings_SCHEMAS) install-gsettings-schemas: $(gsettings_SCHEMAS) $(gsettings__enum_file) @$(NORMAL_INSTALL) if test -n "$^"; then \ test -z "$(gsettingsschemadir)" || $(MKDIR_P) "$(DESTDIR)$(gsettingsschemadir)"; \ $(INSTALL_DATA) $^ "$(DESTDIR)$(gsettingsschemadir)"; \ test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir); \ fi uninstall-gsettings-schemas: @$(NORMAL_UNINSTALL) @list='\''$(gsettings_SCHEMAS) $(gsettings__enum_file)'\''; test -n "$(gsettingsschemadir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e '\''s|^.*/||'\''`; \ test -n "$$files" || exit 0; \ echo " ( cd '\''$(DESTDIR)$(gsettingsschemadir)'\'' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(gsettingsschemadir)" && rm -f $$files test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir) clean-gsettings-schemas: rm -f $(gsettings_SCHEMAS:.xml=.valid) $(gsettings__enum_file) ifdef gsettings_ENUM_NAMESPACE $(gsettings__enum_file): $(gsettings_ENUM_FILES) $(AM_V_GEN) glib-mkenums --comments '\'''\'' --fhead "" --vhead " <@type@ id='\''$(gsettings_ENUM_NAMESPACE).@EnumName@'\''>" --vprod " " --vtail " " --ftail "" [$]^ > [$]@.tmp && mv [$]@.tmp [$]@ endif ' _GSETTINGS_SUBST(GSETTINGS_RULES) ]) dnl _GSETTINGS_SUBST(VARIABLE) dnl Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST AC_DEFUN([_GSETTINGS_SUBST], [ AC_SUBST([$1]) m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])]) ] ) # nls.m4 serial 5 (gettext-0.18) dnl Copyright (C) 1995-2003, 2005-2006, 2008-2014 Free Software Foundation, dnl Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl dnl This file can can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU dnl gettext package package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Authors: dnl Ulrich Drepper , 1995-2000. dnl Bruno Haible , 2000-2003. AC_PREREQ([2.50]) AC_DEFUN([AM_NLS], [ AC_MSG_CHECKING([whether NLS is requested]) dnl Default is enabled NLS AC_ARG_ENABLE([nls], [ --disable-nls do not use Native Language Support], USE_NLS=$enableval, USE_NLS=yes) AC_MSG_RESULT([$USE_NLS]) AC_SUBST([USE_NLS]) ]) # pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- # serial 1 (pkg-config-0.24) # # Copyright © 2004 Scott James Remnant . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # PKG_PROG_PKG_CONFIG([MIN-VERSION]) # ---------------------------------- AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) fi if test -n "$PKG_CONFIG"; then _pkg_min_version=m4_default([$1], [0.9.0]) AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) PKG_CONFIG="" fi fi[]dnl ])# PKG_PROG_PKG_CONFIG # PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) # # Check to see whether a particular set of modules exists. Similar # to PKG_CHECK_MODULES(), but does not set variables or print errors. # # Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) # only at the first occurence in configure.ac, so if the first place # it's called might be skipped (such as if it is within an "if", you # have to call PKG_CHECK_EXISTS manually # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl if test -n "$PKG_CONFIG" && \ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then m4_default([$2], [:]) m4_ifvaln([$3], [else $3])dnl fi]) # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) # --------------------------------------------- m4_define([_PKG_CONFIG], [if test -n "$$1"; then pkg_cv_[]$1="$$1" elif test -n "$PKG_CONFIG"; then PKG_CHECK_EXISTS([$3], [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes ], [pkg_failed=yes]) else pkg_failed=untried fi[]dnl ])# _PKG_CONFIG # _PKG_SHORT_ERRORS_SUPPORTED # ----------------------------- AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi[]dnl ])# _PKG_SHORT_ERRORS_SUPPORTED # PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], # [ACTION-IF-NOT-FOUND]) # # # Note that if there is a possibility the first call to # PKG_CHECK_MODULES might not happen, you should be sure to include an # explicit call to PKG_PROG_PKG_CONFIG in your configure.ac # # # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl pkg_failed=no AC_MSG_CHECKING([for $1]) _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) _PKG_CONFIG([$1][_LIBS], [libs], [$2]) m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS and $1[]_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.]) if test $pkg_failed = yes; then AC_MSG_RESULT([no]) _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` else $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD m4_default([$4], [AC_MSG_ERROR( [Package requirements ($2) were not met: $$1_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. _PKG_TEXT])[]dnl ]) elif test $pkg_failed = untried; then AC_MSG_RESULT([no]) m4_default([$4], [AC_MSG_FAILURE( [The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. _PKG_TEXT To get pkg-config, see .])[]dnl ]) else $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS $1[]_LIBS=$pkg_cv_[]$1[]_LIBS AC_MSG_RESULT([yes]) $3 fi[]dnl ])# PKG_CHECK_MODULES # PKG_INSTALLDIR(DIRECTORY) # ------------------------- # Substitutes the variable pkgconfigdir as the location where a module # should install pkg-config .pc files. By default the directory is # $libdir/pkgconfig, but the default can be changed by passing # DIRECTORY. The user can override through the --with-pkgconfigdir # parameter. AC_DEFUN([PKG_INSTALLDIR], [m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])]) m4_pushdef([pkg_description], [pkg-config installation directory @<:@]pkg_default[@:>@]) AC_ARG_WITH([pkgconfigdir], [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],, [with_pkgconfigdir=]pkg_default) AC_SUBST([pkgconfigdir], [$with_pkgconfigdir]) m4_popdef([pkg_default]) m4_popdef([pkg_description]) ]) dnl PKG_INSTALLDIR # PKG_NOARCH_INSTALLDIR(DIRECTORY) # ------------------------- # Substitutes the variable noarch_pkgconfigdir as the location where a # module should install arch-independent pkg-config .pc files. By # default the directory is $datadir/pkgconfig, but the default can be # changed by passing DIRECTORY. The user can override through the # --with-noarch-pkgconfigdir parameter. AC_DEFUN([PKG_NOARCH_INSTALLDIR], [m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])]) m4_pushdef([pkg_description], [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@]) AC_ARG_WITH([noarch-pkgconfigdir], [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],, [with_noarch_pkgconfigdir=]pkg_default) AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir]) m4_popdef([pkg_default]) m4_popdef([pkg_description]) ]) dnl PKG_NOARCH_INSTALLDIR # PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE, # [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) # ------------------------------------------- # Retrieves the value of the pkg-config variable for the given module. AC_DEFUN([PKG_CHECK_VAR], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl _PKG_CONFIG([$1], [variable="][$3]["], [$2]) AS_VAR_COPY([$1], [pkg_cv_][$1]) AS_VAR_IF([$1], [""], [$5], [$4])dnl ])# PKG_CHECK_VAR AC_DEFUN([YELP_HELP_INIT], [ AC_REQUIRE([AC_PROG_LN_S]) m4_pattern_allow([AM_V_at]) m4_pattern_allow([AM_V_GEN]) m4_pattern_allow([AM_DEFAULT_VERBOSITY]) YELP_LC_MEDIA_LINKS=true YELP_LC_DIST=true for yelpopt in [$1]; do case $yelpopt in lc-media-links) YELP_LC_MEDIA_LINKS=true ;; no-lc-media-links) YELP_LC_MEDIA_LINKS= ;; lc-dist) YELP_LC_DIST=true ;; no-lc-dist) YELP_LC_DIST= ;; *) AC_MSG_ERROR([Unrecognized [YELP_HELP_INIT] option $yelpopt"]) ;; esac done; AC_SUBST([YELP_LC_MEDIA_LINKS]) AC_SUBST([YELP_LC_DIST]) AC_ARG_WITH([help-dir], AS_HELP_STRING([--with-help-dir=DIR], [path where help files are installed]),, [with_help_dir='${datadir}/help']) HELP_DIR="$with_help_dir" AC_SUBST(HELP_DIR) AC_ARG_VAR([ITSTOOL], [Path to the `itstool` command]) AC_CHECK_PROG([ITSTOOL], [itstool], [itstool]) if test x"$ITSTOOL" = x; then AC_MSG_ERROR([itstool not found]) fi AC_ARG_VAR([XMLLINT], [Path to the `xmllint` command]) AC_CHECK_PROG([XMLLINT], [xmllint], [xmllint]) if test x"$XMLLINT" = x; then AC_MSG_ERROR([xmllint not found]) fi YELP_HELP_RULES=' HELP_ID ?= HELP_POT ?= HELP_FILES ?= HELP_EXTRA ?= HELP_MEDIA ?= HELP_LINGUAS ?= _HELP_LINGUAS = $(if $(filter environment,$(origin LINGUAS)),$(filter $(LINGUAS),$(HELP_LINGUAS)),$(HELP_LINGUAS)) _HELP_POTFILE = $(if $(HELP_POT),$(HELP_POT),$(if $(HELP_ID),$(HELP_ID).pot)) _HELP_POFILES = $(if $(HELP_ID),$(foreach lc,$(_HELP_LINGUAS),$(lc)/$(lc).po)) _HELP_MOFILES = $(patsubst %.po,%.mo,$(_HELP_POFILES)) _HELP_C_FILES = $(foreach f,$(HELP_FILES),C/$(f)) _HELP_C_EXTRA = $(foreach f,$(HELP_EXTRA),C/$(f)) _HELP_C_MEDIA = $(foreach f,$(HELP_MEDIA),C/$(f)) _HELP_LC_FILES = $(foreach lc,$(_HELP_LINGUAS),$(foreach f,$(HELP_FILES),$(lc)/$(f))) _HELP_LC_STAMPS = $(foreach lc,$(_HELP_LINGUAS),$(lc)/$(lc).stamp) _HELP_DEFAULT_V = $(if $(AM_DEFAULT_VERBOSITY),$(AM_DEFAULT_VERBOSITY),1) _HELP_V = $(if $(V),$(V),$(_HELP_DEFAULT_V)) _HELP_LC_VERBOSE = $(_HELP_LC_VERBOSE_$(_HELP_V)) _HELP_LC_VERBOSE_ = $(_HELP_LC_VERBOSE_$(_HELP_DEFAULT_V)) _HELP_LC_VERBOSE_0 = @echo " GEN "$(dir [$]@); all: $(_HELP_C_FILES) $(_HELP_C_EXTRA) $(_HELP_C_MEDIA) $(_HELP_LC_FILES) $(_HELP_POFILES) .PHONY: pot pot: $(_HELP_POTFILE) $(_HELP_POTFILE): $(_HELP_C_FILES) $(_HELP_C_EXTRA) $(_HELP_C_MEDIA) $(AM_V_GEN)if test -d "C"; then d=; else d="$(srcdir)/"; fi; \ $(ITSTOOL) -o "[$]@" $(foreach f,$(_HELP_C_FILES),"$${d}$(f)") .PHONY: repo repo: $(_HELP_POTFILE) $(AM_V_at)for po in $(_HELP_POFILES); do \ if test "x[$](_HELP_V)" = "x0"; then echo " GEN $${po}"; fi; \ msgmerge -q -o "$${po}" "$${po}" "$(_HELP_POTFILE)"; \ done $(_HELP_POFILES): $(AM_V_at)if ! test -d "$(dir [$]@)"; then mkdir "$(dir [$]@)"; fi $(AM_V_at)if test ! -f "[$]@" -a -f "$(srcdir)/[$]@"; then cp "$(srcdir)/[$]@" "[$]@"; fi $(AM_V_GEN)if ! test -f "[$]@"; then \ (cd "$(dir [$]@)" && \ $(ITSTOOL) -o "$(notdir [$]@).tmp" $(_HELP_C_FILES) && \ mv "$(notdir [$]@).tmp" "$(notdir [$]@)"); \ else \ (cd "$(dir [$]@)" && \ $(ITSTOOL) -o "$(notdir [$]@).tmp" $(_HELP_C_FILES) && \ msgmerge -o "$(notdir [$]@)" "$(notdir [$]@)" "$(notdir [$]@).tmp" && \ rm "$(notdir [$]@).tmp"); \ fi $(_HELP_MOFILES): %.mo: %.po $(AM_V_at)if ! test -d "$(dir [$]@)"; then mkdir "$(dir [$]@)"; fi $(AM_V_GEN)msgfmt -o "[$]@" "$<" $(_HELP_LC_FILES): $(_HELP_LINGUAS) $(_HELP_LINGUAS): $(_HELP_LC_STAMPS) $(_HELP_LC_STAMPS): %.stamp: %.mo $(_HELP_LC_STAMPS): $(_HELP_C_FILES) $(_HELP_C_EXTRA) $(AM_V_at)if ! test -d "$(dir [$]@)"; then mkdir "$(dir [$]@)"; fi $(_HELP_LC_VERBOSE)if test -d "C"; then d="../"; else d="$(abs_srcdir)/"; fi; \ mo="$(dir [$]@)$(patsubst %/$(notdir [$]@),%,[$]@).mo"; \ if test -f "$${mo}"; then mo="../$${mo}"; else mo="$(abs_srcdir)/$${mo}"; fi; \ (cd "$(dir [$]@)" && $(ITSTOOL) -m "$${mo}" $(foreach f,$(_HELP_C_FILES),$${d}/$(f))) && \ touch "[$]@" .PHONY: clean-help mostlyclean-am: $(if $(HELP_ID),clean-help) clean-help: rm -f $(_HELP_LC_FILES) $(_HELP_LC_STAMPS) $(_HELP_MOFILES) EXTRA_DIST ?= EXTRA_DIST += $(_HELP_C_EXTRA) $(_HELP_C_MEDIA) EXTRA_DIST += $(if $(YELP_LC_DIST),$(foreach lc,$(HELP_LINGUAS),$(lc)/$(lc).stamp)) EXTRA_DIST += $(foreach lc,$(HELP_LINGUAS),$(lc)/$(lc).po) EXTRA_DIST += $(foreach f,$(HELP_MEDIA),$(foreach lc,$(HELP_LINGUAS),$(wildcard $(lc)/$(f)))) distdir: distdir-help-files distdir-help-files: $(_HELP_LC_FILES) @for lc in C $(if $(YELP_LC_DIST),$(HELP_LINGUAS)) ; do \ $(MKDIR_P) "$(distdir)/$$lc"; \ for file in $(HELP_FILES); do \ if test -f "$$lc/$$file"; then d=./; else d=$(srcdir)/; fi; \ cp -p "$$d$$lc/$$file" "$(distdir)/$$lc/" || exit 1; \ done; \ done; \ .PHONY: check-help check: check-help check-help: for lc in C $(_HELP_LINGUAS); do \ if test -d "$$lc"; \ then d=; \ xmlpath="$$lc"; \ else \ d="$(srcdir)/"; \ xmlpath="$$lc:$(srcdir)/$$lc"; \ fi; \ for page in $(HELP_FILES); do \ echo "$(XMLLINT) --noout --noent --path $$xmlpath --xinclude $$d$$lc/$$page"; \ $(XMLLINT) --noout --noent --path "$$xmlpath" --xinclude "$$d$$lc/$$page"; \ done; \ done .PHONY: install-help install-data-am: $(if $(HELP_ID),install-help) install-help: $(_HELP_LC_FILES) @for lc in C $(_HELP_LINGUAS); do \ $(mkinstalldirs) "$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)" || exit 1; \ done @for lc in C $(_HELP_LINGUAS); do for f in $(HELP_FILES); do \ if test -f "$$lc/$$f"; then d=; else d="$(srcdir)/"; fi; \ helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ if ! test -d "$$helpdir"; then $(mkinstalldirs) "$$helpdir"; fi; \ echo "$(INSTALL_DATA) $$d$$lc/$$f $$helpdir`basename $$f`"; \ $(INSTALL_DATA) "$$d$$lc/$$f" "$$helpdir`basename $$f`" || exit 1; \ done; done @for f in $(_HELP_C_EXTRA); do \ lc=`dirname "$$f"`; lc=`basename "$$lc"`; \ if test -f "$$f"; then d=; else d="$(srcdir)/"; fi; \ helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ if ! test -d "$$helpdir"; then $(mkinstalldirs) "$$helpdir"; fi; \ echo "$(INSTALL_DATA) $$d$$f $$helpdir`basename $$f`"; \ $(INSTALL_DATA) "$$d$$f" "$$helpdir`basename $$f`" || exit 1; \ done @for f in $(HELP_MEDIA); do \ for lc in C $(_HELP_LINGUAS); do \ if test -f "$$lc$$f"; then d=; else d="$(srcdir)/"; fi; \ helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ mdir=`dirname "$$f"`; \ if test "x$mdir" = "x."; then mdir=""; fi; \ if ! test -d "$$helpdir$$mdir"; then $(mkinstalldirs) "$$helpdir$$mdir"; fi; \ if test -f "$$d$$lc/$$f"; then \ echo "$(INSTALL_DATA) $$d$$lc/$$f $$helpdir$$f"; \ $(INSTALL_DATA) "$$d$$lc/$$f" "$$helpdir$$f" || exit 1; \ elif test "x$$lc" != "xC"; then \ if test "x$(YELP_LC_MEDIA_LINKS)" != "x"; then \ echo "$(LN_S) -f $(HELP_DIR)/C/$(HELP_ID)/$$f $$helpdir$$f"; \ $(LN_S) -f "$(HELP_DIR)/C/$(HELP_ID)/$$f" "$$helpdir$$f" || exit 1; \ fi; \ fi; \ done; \ done .PHONY: uninstall-help uninstall-am: $(if $(HELP_ID),uninstall-help) uninstall-help: for lc in C $(_HELP_LINGUAS); do for f in $(HELP_FILES); do \ helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ echo "rm -f $$helpdir`basename $$f`"; \ rm -f "$$helpdir`basename $$f`"; \ done; done @for f in $(_HELP_C_EXTRA); do \ lc=`dirname "$$f"`; lc=`basename "$$lc"`; \ helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ echo "rm -f $$helpdir`basename $$f`"; \ rm -f "$$helpdir`basename $$f`"; \ done @for f in $(HELP_MEDIA); do \ for lc in C $(_HELP_LINGUAS); do \ helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ echo "rm -f $$helpdir$$f"; \ rm -f "$$helpdir$$f"; \ done; \ done; ' AC_SUBST([YELP_HELP_RULES]) m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([YELP_HELP_RULES])]) ]) # Copyright (C) 2002-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.14' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.14.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.14.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to # '$srcdir', '$srcdir/..', or '$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is '.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl # Expand $ac_aux_dir to an absolute path. am_aux_dir=`cd "$ac_aux_dir" && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ([2.52])dnl m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], [$1], [CXX], [depcc="$CXX" am_compiler_list=], [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], [$1], [UPC], [depcc="$UPC" am_compiler_list=], [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi am__universal=false m4_case([$1], [CC], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac], [CXX], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac]) for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES. AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE([dependency-tracking], [dnl AS_HELP_STRING( [--enable-dependency-tracking], [do not reject slow dependency extractors]) AS_HELP_STRING( [--disable-dependency-tracking], [speeds up one-time build])]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl AC_SUBST([am__nodep])dnl _AM_SUBST_NOTMAKE([am__nodep])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named 'Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each '.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC]) [_AM_PROG_CC_C_O ]) # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.65])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [AC_DIAGNOSE([obsolete], [$0: two- and three-arguments forms are deprecated.]) m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if( m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), [ok:ok],, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) AM_MISSING_PROG([AUTOCONF], [autoconf]) AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) AM_MISSING_PROG([AUTOHEADER], [autoheader]) AM_MISSING_PROG([MAKEINFO], [makeinfo]) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # AC_SUBST([mkdir_p], ['$(MKDIR_P)']) # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES([CC])], [m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES([CXX])], [m4_define([AC_PROG_CXX], m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES([OBJC])], [m4_define([AC_PROG_OBJC], m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], [_AM_DEPENDENCIES([OBJCXX])], [m4_define([AC_PROG_OBJCXX], m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl ]) AC_REQUIRE([AM_SILENT_RULES])dnl dnl The testsuite driver may need to know about EXEEXT, so add the dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl # POSIX will say in a future version that running "rm -f" with no argument # is OK; and we want to be able to make that assumption in our Makefile # recipes. So use an aggressive probe to check that the usage we want is # actually supported "in the wild" to an acceptable degree. # See automake bug#10828. # To make any issue more visible, cause the running configure to be aborted # by default if the 'rm' program in use doesn't match our expectations; the # user can still override this though. if rm -f && rm -fr && rm -rf; then : OK; else cat >&2 <<'END' Oops! Your 'rm' program seems unable to run without file operands specified on the command line, even when the '-f' option is present. This is contrary to the behaviour of most rm programs out there, and not conforming with the upcoming POSIX standard: Please tell bug-automake@gnu.org about your system, including the value of your $PATH and any error possibly output before this message. This can help us improve future automake versions. END if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then echo 'Configuration will proceed anyway, since you have set the' >&2 echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 echo >&2 else cat >&2 <<'END' Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation that behaves properly: . If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM to "yes", and re-run configure. END AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) fi fi ]) dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi AC_SUBST([install_sh])]) # Copyright (C) 2003-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from 'make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it is modern enough. # If it is, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= AC_MSG_WARN(['missing' script is too old or missing]) fi ]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # -------------------- # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), [1])]) # _AM_SET_OPTIONS(OPTIONS) # ------------------------ # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Copyright (C) 1999-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_CC_C_O # --------------- # Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC # to automatically call this. AC_DEFUN([_AM_PROG_CC_C_O], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([compile])dnl AC_LANG_PUSH([C])dnl AC_CACHE_CHECK( [whether $CC understands -c and -o together], [am_cv_prog_cc_c_o], [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done rm -f core conftest* unset am_i]) if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi AC_LANG_POP([C])]) # For backward compatibility. AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_RUN_LOG(COMMAND) # ------------------- # Run COMMAND, save the exit status in ac_status, and log it. # (This has been adapted from Autoconf's _AC_RUN_LOG macro.) AC_DEFUN([AM_RUN_LOG], [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD (exit $ac_status); }]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi if test "$[2]" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT([yes]) # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi AC_CONFIG_COMMANDS_PRE( [AC_MSG_CHECKING([that generated files are newer than configure]) if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi AC_MSG_RESULT([done])]) rm -f conftest.file ]) # Copyright (C) 2009-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SILENT_RULES([DEFAULT]) # -------------------------- # Enable less verbose build rules; with the default set to DEFAULT # ("yes" being less verbose, "no" or empty being verbose). AC_DEFUN([AM_SILENT_RULES], [AC_ARG_ENABLE([silent-rules], [dnl AS_HELP_STRING( [--enable-silent-rules], [less verbose build output (undo: "make V=1")]) AS_HELP_STRING( [--disable-silent-rules], [verbose build output (undo: "make V=0")])dnl ]) case $enable_silent_rules in @%:@ ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; esac dnl dnl A few 'make' implementations (e.g., NonStop OS and NextStep) dnl do not support nested variable expansions. dnl See automake bug#9928 and bug#10237. am_make=${MAKE-make} AC_CACHE_CHECK([whether $am_make supports nested variables], [am_cv_make_support_nested_variables], [if AS_ECHO([['TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi]) if test $am_cv_make_support_nested_variables = yes; then dnl Using '$V' instead of '$(V)' breaks IRIX make. AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AC_SUBST([AM_V])dnl AM_SUBST_NOTMAKE([AM_V])dnl AC_SUBST([AM_DEFAULT_V])dnl AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl AC_SUBST([AM_DEFAULT_VERBOSITY])dnl AM_BACKSLASH='\' AC_SUBST([AM_BACKSLASH])dnl _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl ]) # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor 'install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in "make install-strip", and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # AM_SUBST_NOTMAKE(VARIABLE) # -------------------------- # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of 'v7', 'ustar', or 'pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar # AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AC_SUBST([AMTAR], ['$${TAR-tar}']) # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' m4_if([$1], [v7], [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], [m4_case([$1], [ustar], [# The POSIX 1988 'ustar' format is defined with fixed-size fields. # There is notably a 21 bits limit for the UID and the GID. In fact, # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 # and bug#13588). am_max_uid=2097151 # 2^21 - 1 am_max_gid=$am_max_uid # The $UID and $GID variables are not portable, so we need to resort # to the POSIX-mandated id(1) utility. Errors in the 'id' calls # below are definitely unexpected, so allow the users to see them # (that is, avoid stderr redirection). am_uid=`id -u || echo unknown` am_gid=`id -g || echo unknown` AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) if test $am_uid -le $am_max_uid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) if test $am_gid -le $am_max_gid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi], [pax], [], [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Go ahead even if we have the value already cached. We do so because we # need to set the values for the 'am__tar' and 'am__untar' variables. _am_tools=${am_cv_prog_tar_$1-$_am_tools} for _am_tool in $_am_tools; do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works. rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR m4_include([m4/gtk-doc.m4]) m4_include([m4/intltool.m4]) m4_include([m4/libtool.m4]) m4_include([m4/ltoptions.m4]) m4_include([m4/ltsugar.m4]) m4_include([m4/ltversion.m4]) m4_include([m4/lt~obsolete.m4]) parlatype-1.5.4/libreoffice/0000755000175000017500000000000013204324054012771 500000000000000parlatype-1.5.4/libreoffice/Makefile.in0000644000175000017500000003650713204324006014766 00000000000000# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = libreoffice DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ $(am__dist_lo_DATA_DIST) ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__dist_lo_DATA_DIST = Parlatype.py am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(lodir)" DATA = $(dist_lo_DATA) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ APPDATA_VALIDATE = @APPDATA_VALIDATE@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DESKTOP_FILE_VALIDATE = @DESKTOP_FILE_VALIDATE@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ GTKDOC_CHECK = @GTKDOC_CHECK@ GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ GTKDOC_REBASE = @GTKDOC_REBASE@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ HELP_DIR = @HELP_DIR@ HTML_DIR = @HTML_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ ITSTOOL = @ITSTOOL@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ WARNINGCFLAGS = @WARNINGCFLAGS@ XGETTEXT = @XGETTEXT@ XMLLINT = @XMLLINT@ YELP_LC_DIST = @YELP_LC_DIST@ YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gsettingsschemadir = @gsettingsschemadir@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ intltool__v_merge_options_ = @intltool__v_merge_options_@ intltool__v_merge_options_0 = @intltool__v_merge_options_0@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ subdirs = @subdirs@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ lodir = $(libdir)/libreoffice/share/Scripts/python @LIBREOFFICE_TRUE@dist_lo_DATA = Parlatype.py all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign libreoffice/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign libreoffice/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-dist_loDATA: $(dist_lo_DATA) @$(NORMAL_INSTALL) @list='$(dist_lo_DATA)'; test -n "$(lodir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(lodir)'"; \ $(MKDIR_P) "$(DESTDIR)$(lodir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(lodir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(lodir)" || exit $$?; \ done uninstall-dist_loDATA: @$(NORMAL_UNINSTALL) @list='$(dist_lo_DATA)'; test -n "$(lodir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(lodir)'; $(am__uninstall_files_from_dir) tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(lodir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dist_loDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-dist_loDATA .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ cscopelist-am ctags-am distclean distclean-generic \ distclean-libtool distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am \ install-dist_loDATA install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \ uninstall-am uninstall-dist_loDATA # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: parlatype-1.5.4/libreoffice/Parlatype.py0000644000175000017500000000711213204250037015224 00000000000000# -*- coding: utf-8 -*- ''' Parlatype.py is part of Parlatype. Version: 1.5.4 Copyright (C) Gabor Karsay 2016 This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . ''' import dbus def _getDBUSService(): try: obj = dbus.SessionBus().get_object( "com.github.gkarsay.parlatype", "/com/github/gkarsay/parlatype") except Exception: return None return dbus.Interface(obj, "com.github.gkarsay.parlatype") def _getTextRange(): doc = XSCRIPTCONTEXT.getDocument() # the writer controller impl supports # the css.view.XSelectionSupplier interface xSelectionSupplier = doc.getCurrentController() xIndexAccess = xSelectionSupplier.getSelection() count = xIndexAccess.getCount() # don't mess arount with multiple selections if (count != 1): return None textrange = xIndexAccess.getByIndex(0) # don't mess around with selections, just plain cursor if (len(textrange.getString()) == 0): return textrange else: return None def InsertTimestamp(): textrange = _getTextRange() if (textrange is None): return service = _getDBUSService() if (service is None): return textrange.setString(service.GetTimestamp()) def InsertTimestampOnNewLine(): textrange = _getTextRange() if (textrange is None): return service = _getDBUSService() if (service is None): return textrange.setString("\n" + service.GetTimestamp() + " ") def _extractTimestamp(): textrange = _getTextRange() if (textrange is None): return None xText = textrange.getText() cursor = xText.createTextCursorByRange(textrange) # select first char on the left cursor.goLeft(1, True) # we are at beginning of doc if (cursor.getString() == ""): return None i = 0 while (cursor.getString()[0] != "#" and i < 15): cursor.goLeft(1, True) i += 1 # left limit not found if (cursor.getString()[0] != "#"): return None cursor.collapseToStart() cursor.goRight(2, True) i = 0 while (cursor.getString()[-1:] != "#" and i < 15): cursor.goRight(1, True) i += 1 # right limit not found if (cursor.getString()[-1:] != "#"): return None return cursor.getString() def GotoTimestamp(): timestamp = _extractTimestamp() if (timestamp is None): return service = _getDBUSService() if (service is None): return service.GotoTimestamp(timestamp) def PlayPause(): service = _getDBUSService() if (service is None): return service.PlayPause() def JumpBack(): service = _getDBUSService() if (service is None): return service.JumpBack() def JumpForward(): service = _getDBUSService() if (service is None): return service.JumpForward() def IncreaseSpeed(): service = _getDBUSService() if (service is None): return service.IncreaseSpeed() def DecreaseSpeed(): service = _getDBUSService() if (service is None): return service.DecreaseSpeed() # Lists the scripts, that shall be visible inside OOo. # Can be omited, if all functions shall be visible. g_exportedScripts = \ InsertTimestamp,\ InsertTimestampOnNewLine,\ GotoTimestamp,\ PlayPause,\ JumpBack,\ JumpForward,\ IncreaseSpeed,\ DecreaseSpeed, parlatype-1.5.4/libreoffice/Makefile.am0000644000175000017500000000014613176574165014770 00000000000000lodir = $(libdir)/libreoffice/share/Scripts/python if LIBREOFFICE dist_lo_DATA = Parlatype.py endif parlatype-1.5.4/missing0000755000175000017500000001533013167645114012054 00000000000000#! /bin/sh # Common wrapper for a few potentially missing GNU programs. scriptversion=2013-10-28.13; # UTC # Copyright (C) 1996-2013 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try '$0 --help' for more information" exit 1 fi case $1 in --is-lightweight) # Used by our autoconf macros to check whether the available missing # script is modern enough. exit 0 ;; --run) # Back-compat with the calling convention used by older automake. shift ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit Supported PROGRAM values: aclocal autoconf autoheader autom4te automake makeinfo bison yacc flex lex help2man Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and 'g' are ignored when checking the name. Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: unknown '$1' option" echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac # Run the given program, remember its exit status. "$@"; st=$? # If it succeeded, we are done. test $st -eq 0 && exit 0 # Also exit now if we it failed (or wasn't found), and '--version' was # passed; such an option is passed most likely to detect whether the # program is present and works. case $2 in --version|--help) exit $st;; esac # Exit code 63 means version mismatch. This often happens when the user # tries to use an ancient version of a tool on a file that requires a # minimum version. if test $st -eq 63; then msg="probably too old" elif test $st -eq 127; then # Program was missing. msg="missing on your system" else # Program was found and executed, but failed. Give up. exit $st fi perl_URL=http://www.perl.org/ flex_URL=http://flex.sourceforge.net/ gnu_software_URL=http://www.gnu.org/software program_details () { case $1 in aclocal|automake) echo "The '$1' program is part of the GNU Automake package:" echo "<$gnu_software_URL/automake>" echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/autoconf>" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; autoconf|autom4te|autoheader) echo "The '$1' program is part of the GNU Autoconf package:" echo "<$gnu_software_URL/autoconf/>" echo "It also requires GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; esac } give_advice () { # Normalize program name to check for. normalized_program=`echo "$1" | sed ' s/^gnu-//; t s/^gnu//; t s/^g//; t'` printf '%s\n' "'$1' is $msg." configure_deps="'configure.ac' or m4 files included by 'configure.ac'" case $normalized_program in autoconf*) echo "You should only need it if you modified 'configure.ac'," echo "or m4 files included by it." program_details 'autoconf' ;; autoheader*) echo "You should only need it if you modified 'acconfig.h' or" echo "$configure_deps." program_details 'autoheader' ;; automake*) echo "You should only need it if you modified 'Makefile.am' or" echo "$configure_deps." program_details 'automake' ;; aclocal*) echo "You should only need it if you modified 'acinclude.m4' or" echo "$configure_deps." program_details 'aclocal' ;; autom4te*) echo "You might have modified some maintainer files that require" echo "the 'autom4te' program to be rebuilt." program_details 'autom4te' ;; bison*|yacc*) echo "You should only need it if you modified a '.y' file." echo "You may want to install the GNU Bison package:" echo "<$gnu_software_URL/bison/>" ;; lex*|flex*) echo "You should only need it if you modified a '.l' file." echo "You may want to install the Fast Lexical Analyzer package:" echo "<$flex_URL>" ;; help2man*) echo "You should only need it if you modified a dependency" \ "of a man page." echo "You may want to install the GNU Help2man package:" echo "<$gnu_software_URL/help2man/>" ;; makeinfo*) echo "You should only need it if you modified a '.texi' file, or" echo "any other file indirectly affecting the aspect of the manual." echo "You might want to install the Texinfo package:" echo "<$gnu_software_URL/texinfo/>" echo "The spurious makeinfo call might also be the consequence of" echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" echo "want to install GNU make:" echo "<$gnu_software_URL/make/>" ;; *) echo "You might have modified some files without having the proper" echo "tools for further handling them. Check the 'README' file, it" echo "often tells you about the needed prerequisites for installing" echo "this package. You may also peek at any GNU archive site, in" echo "case some other package contains this missing '$1' program." ;; esac } give_advice "$1" | sed -e '1s/^/WARNING: /' \ -e '2,$s/^/ /' >&2 # Propagate the correct exit status (expected to be 127 for a program # not found, 63 for a program that failed due to version mismatch). exit $st # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: parlatype-1.5.4/COPYING0000644000175000017500000010451313171727131011505 00000000000000 GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things. To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it. For the developers' and authors' protection, the GPL clearly explains that there is no warranty for this free software. For both users' and authors' sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users' freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS 0. Definitions. "This License" refers to version 3 of the GNU General Public License. "Copyright" also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. "The Program" refers to any copyrightable work licensed under this License. Each licensee is addressed as "you". "Licensees" and "recipients" may be individuals or organizations. To "modify" a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a "modified version" of the earlier work or a work "based on" the earlier work. A "covered work" means either the unmodified Program or a work based on the Program. To "propagate" a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well. To "convey" a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying. An interactive user interface displays "Appropriate Legal Notices" to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. 1. Source Code. The "source code" for a work means the preferred form of the work for making modifications to it. "Object code" means any non-source form of a work. A "Standard Interface" means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. The "System Libraries" of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A "Major Component", in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it. The "Corresponding Source" for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the work's System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work. The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source. The Corresponding Source for a work in source code form is that same work. 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you. Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary. 3. Protecting Users' Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures. When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work's users, your or third parties' legal rights to forbid circumvention of technological measures. 4. Conveying Verbatim Copies. You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions: a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to "keep intact all notices". c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it. d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so. A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an "aggregate" if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation's users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate. 6. Conveying Non-Source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways: a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange. b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge. c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6b. d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements. e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. A "User Product" is either (1) a "consumer product", which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, "normally used" refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product. "Installation Information" for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made. If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM). The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network. Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying. 7. Additional Terms. "Additional permissions" are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions. When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission. Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms: a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or d) Limiting the use for publicity purposes of names of licensors or authors of the material; or e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors. All other non-permissive additional terms are considered "further restrictions" within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying. If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, or a notice indicating where to find the applicable terms. Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way. 8. Termination. You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice. Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10. 9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so. 10. Automatic Licensing of Downstream Recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. An "entity transaction" is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party's predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. 11. Patents. A "contributor" is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor's "contributor version". A contributor's "essential patent claims" are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version. For purposes of this definition, "control" includes the right to grant patent sublicenses in a manner consistent with the requirements of this License. Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a "patent license" is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To "grant" such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party. If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. "Knowingly relying" means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient's use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it. A patent license is "discriminatory" if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007. Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law. 12. No Surrender of Others' Freedom. If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program. 13. Use with the GNU Affero General Public License. Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such. 14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU General Public License "or any later version" applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the Program. Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version. 15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. Limitation of Liability. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 17. Interpretation of Sections 15 and 16. If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively state the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . Also add information on how to contact you by electronic and paper mail. If the program does terminal interaction, make it output a short notice like this when it starts in an interactive mode: Copyright (C) This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, your program's commands might be different; for a GUI interface, you would use an "about box". You should also get your employer (if you work as a programmer) or school, if any, to sign a "copyright disclaimer" for the program, if necessary. For more information on this, and how to apply and follow the GNU GPL, see . The GNU General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. But first, please read . parlatype-1.5.4/config.rpath0000644000175000017500000000000013176574164012754 00000000000000parlatype-1.5.4/COPYING_CCBYSA0000644000175000017500000000242713176574164012545 00000000000000License for data/icons/*/apps/parlatype.png and data/icons/scalable/apps/parlatype-symbolic.svg and src/resources/icons/cursor.png: This work is licenced under the Creative Commons Attribution-Share Alike 3.0 United States License. To view a copy of this license, visit http://creativecommons.org/licenses/by-sa/3.0/ or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042, USA. It was created by * Gabor Karsay using and modifying artwork from the * GNOME Project, http://www.gnome.org License for libparlatype/data/icons/*/actions/widget-pt-waveviewer.png: This work is licenced under the Creative Commons Attribution-Share Alike 3.0 United States License. To view a copy of this license, visit http://creativecommons.org/licenses/by-sa/3.0/ or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042, USA. Created by Gabor Karsay License for help/*: This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-sa/4.0/ or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042, USA. Created by Gabor Karsay parlatype-1.5.4/NEWS0000644000175000017500000001110013204247655011143 00000000000000Overview of Changes in Parlatype 1.5.3 – 2017-11-19 =================================================== * Fix #20: fix usage of media keys – again, now without regressions Overview of Changes in Parlatype 1.5.3 – 2017-11-14 =================================================== * Fix #20: fix usage of media keys * Rewrite waveform display (using GtkOverlay) and improve performance * New: Show/hide ruler with animation * New: This NEWS file, compilated from release notes * libparlatype changes: - Added tests, including code coverage * Translation updates: Brazilian Portuguese British English Spanish Overview of Changes in Parlatype 1.5.2 – 2017-08-10 =================================================== * Fix #12: Waveform not displayed on KDE/Plasma desktop * Fix #15: Pitch changes with GStreamer 1.2 * Fix #7: Don't show options that are not available on Wayland * In GNOME help, showing the complete list of help documents, Parlatype's icon is shown again. This was a regression introduced with version 1.5.1. * Changed icon for action menu to GNOME default icon * New: Added a symbolic icon, shown in GNOME shell (with GTK+ 3.16 or later) * New: Added a shortcut window (with GTK+ 3.20 or later) * New: Enabled D-Bus activation (no visible change for users) * Translation updates: French German Japanese Lithuanian Overview of Changes in Parlatype 1.5.1 – 2017-07-08 =================================================== * Fix #5: Waveform invisible when window focused (regression) * Fix: Several regressions that appeared in GTK+ 3.20 and 3.22 * Fix #10: Fixed/improved volume control * Fix: Several memory leaks * Fix: Regression: didn't jump to cursor on opening file * Fix: Some artifacts in waveform rendering * Fix: Rendering waveform if widget changes size (no blank space) * New: Reacts immediately to theme changes * New: Shortcuts for zooming in and out * New: Space bar toggles play/pause if in keyboard focus * Changed application ID to com.github.gkarsay.parlatype instead of org.gnome.parlatype * Translation updates: Dutch German Spanish Kurdish Lithuanian Malay Portuguese Serbian Overview of Changes in Parlatype 1.5 – 2017-03-14 ================================================= * New: Added a ruler to waveviewer (turn on/off in preferences) * New: Cursor fixed or moving (set in preferences) * New: Set resolution of waveviewer in preferences * New: Introducing selections in waveviewer (select with left mouse button, enlarge with shift, unselect with Escape button) * New: At the end of selection, clicking on Play will repeat the selection * New: Waveviewer or cursor can be focused and moved (keyboard) * New: Waveviewer supports right-to-left languages * New: Use a menubar if preferred by desktop environment (e.g. Unitiy, Xfce) * New: "Follow-cursor" button jumps to cursor position * New: Time label can be drag'n'dropped * Updated help pages, screenshots and documentation * Translation updates: British English Catalan French German Indonesian Italian Kabyle Kurdish Latvian Malay Portuguese Spanish Overview of Changes in Parlatype 1.4.1 – 2016-10-31 =================================================== * Fix: GObject Introspection uses annotation unknown on Ubuntu gi 1.42 vs 1.40 * Fix: Icon display on Ubuntu systems Overview of Changes in Parlatype 1.4 – 2016-10-29 ================================================= * Rewritten waveform display, now based on GtkScrolledWindow * Window design changes * Split out library: libparlatype * Translation updates: German Overview of Changes in Parlatype 1.3 – 2016-09-04 ================================================= * Fix: Don't rewind at end of stream like at pause * New: Display waveform. This feature is using code from Buzztrax. * New: Show progress while loading waveform * Translation updates: German Overview of Changes in Parlatype 1.2 – 2016-08-13 ================================================= * Fix: Some media formats, e.g. ogg, could not be loaded * Fix: Goto dialog could be too small * Updated help pages * Translation updates: German Overview of Changes in Parlatype 1.1 – 2016-07-29 ================================================= * New: Help system * New: Drag'n'Drop support * New: Goto dialog * New: LibreOffice macros (calling DBUS service) * New preferences/settings: Window always on top * New preferences/settings: Remember window position * New: Tooltips for main window elements * Translation updates: German Overview of Changes in Parlatype 1.0 – 2016-01-18 ================================================= * This is the first release of Parlatype. parlatype-1.5.4/config.sub0000755000175000017500000010577513167645114012455 00000000000000#! /bin/sh # Configuration validation subroutine script. # Copyright 1992-2014 Free Software Foundation, Inc. timestamp='2014-09-11' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that # program. This Exception is an additional permission under section 7 # of the GNU General Public License, version 3 ("GPLv3"). # Please send patches with a ChangeLog entry to config-patches@gnu.org. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # You can get the latest version of this script from: # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS $0 [OPTION] ALIAS Canonicalize a configuration name. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright 1992-2014 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" exit 1 ;; *local*) # First pass through any local machine types. echo $1 exit ;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ knetbsd*-gnu* | netbsd*-gnu* | \ kopensolaris*-gnu* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; android-linux) os=-linux-android basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown ;; *) basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] then os=`echo $1 | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple | -axis | -knuth | -cray | -microblaze*) os= basic_machine=$1 ;; -bluegene*) os=-cnk ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 ;; -scout) ;; -wrs) os=-vxworks basic_machine=$1 ;; -chorusos*) os=-chorusos basic_machine=$1 ;; -chorusrdb) os=-chorusrdb basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco6) os=-sco5v6 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5v6*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -udk*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -lynx*178) os=-lynxos178 ;; -lynx*5) os=-lynxos5 ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ;; -windowsnt*) os=`echo $os | sed -e 's/windowsnt/winnt/'` ;; -psos*) os=-psos ;; -mint | -mint[0-9]*) basic_machine=m68k-atari os=-mint ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ | aarch64 | aarch64_be \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ | arc | arceb \ | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ | avr | avr32 \ | be32 | be64 \ | bfin \ | c4x | c8051 | clipper \ | d10v | d30v | dlx | dsp16xx \ | epiphany \ | fido | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | hexagon \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ | k1om \ | le32 | le64 \ | lm32 \ | m32c | m32r | m32rle | m68000 | m68k | m88k \ | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ | mips64octeon | mips64octeonel \ | mips64orion | mips64orionel \ | mips64r5900 | mips64r5900el \ | mips64vr | mips64vrel \ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ | mips64vr5900 | mips64vr5900el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa32r6 | mipsisa32r6el \ | mipsisa64 | mipsisa64el \ | mipsisa64r2 | mipsisa64r2el \ | mipsisa64r6 | mipsisa64r6el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ | mipsr5900 | mipsr5900el \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ | moxie \ | mt \ | msp430 \ | nds32 | nds32le | nds32be \ | nios | nios2 | nios2eb | nios2el \ | ns16k | ns32k \ | open8 | or1k | or1knd | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle \ | pyramid \ | riscv32 | riscv64 \ | rl78 | rx \ | score \ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ | spu \ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ | ubicom32 \ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ | we32k \ | x86 | xc16x | xstormy16 | xtensa \ | z8k | z80) basic_machine=$basic_machine-unknown ;; c54x) basic_machine=tic54x-unknown ;; c55x) basic_machine=tic55x-unknown ;; c6x) basic_machine=tic6x-unknown ;; m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip) basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ;; ms1) basic_machine=mt-unknown ;; strongarm | thumb | xscale) basic_machine=arm-unknown ;; xgate) basic_machine=$basic_machine-unknown os=-none ;; xscaleeb) basic_machine=armeb-unknown ;; xscaleel) basic_machine=armel-unknown ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ | aarch64-* | aarch64_be-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* | avr32-* \ | be32-* | be64-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* \ | c8051-* | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | hexagon-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* | iq2000-* \ | k1om-* \ | le32-* | le64-* \ | lm32-* \ | m32c-* | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ | microblaze-* | microblazeel-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ | mips64octeon-* | mips64octeonel-* \ | mips64orion-* | mips64orionel-* \ | mips64r5900-* | mips64r5900el-* \ | mips64vr-* | mips64vrel-* \ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ | mips64vr5900-* | mips64vr5900el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa32r6-* | mipsisa32r6el-* \ | mipsisa64-* | mipsisa64el-* \ | mipsisa64r2-* | mipsisa64r2el-* \ | mipsisa64r6-* | mipsisa64r6el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipsr5900-* | mipsr5900el-* \ | mipstx39-* | mipstx39el-* \ | mmix-* \ | mt-* \ | msp430-* \ | nds32-* | nds32le-* | nds32be-* \ | nios-* | nios2-* | nios2eb-* | nios2el-* \ | none-* | np1-* | ns16k-* | ns32k-* \ | open8-* \ | or1k*-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ | pyramid-* \ | rl78-* | romp-* | rs6000-* | rx-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ | tahoe-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tile*-* \ | tron-* \ | ubicom32-* \ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ | vax-* \ | we32k-* \ | x86-* | x86_64-* | xc16x-* | xps100-* \ | xstormy16-* | xtensa*-* \ | ymp-* \ | z8k-* | z80-*) ;; # Recognize the basic CPU types without company name, with glob match. xtensa*) basic_machine=$basic_machine-unknown ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) basic_machine=i386-unknown os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; a29khif) basic_machine=a29k-amd os=-udi ;; abacus) basic_machine=abacus-unknown ;; adobe68k) basic_machine=m68010-adobe os=-scout ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amd64) basic_machine=x86_64-pc ;; amd64-*) basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-unknown ;; amigaos | amigados) basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; apollo68bsd) basic_machine=m68k-apollo os=-bsd ;; aros) basic_machine=i386-pc os=-aros ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; blackfin) basic_machine=bfin-unknown os=-linux ;; blackfin-*) basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; bluegene*) basic_machine=powerpc-ibm os=-cnk ;; c54x-*) basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` ;; c55x-*) basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` ;; c6x-*) basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` ;; c90) basic_machine=c90-cray os=-unicos ;; cegcc) basic_machine=arm-unknown os=-cegcc ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | j90) basic_machine=j90-cray os=-unicos ;; craynv) basic_machine=craynv-cray os=-unicosmp ;; cr16 | cr16-*) basic_machine=cr16-unknown os=-elf ;; crds | unos) basic_machine=m68k-crds ;; crisv32 | crisv32-* | etraxfs*) basic_machine=crisv32-axis ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; crx) basic_machine=crx-unknown os=-elf ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; decsystem10* | dec10*) basic_machine=pdp10-dec os=-tops10 ;; decsystem20* | dec20*) basic_machine=pdp10-dec os=-tops20 ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; dicos) basic_machine=i686-pc os=-dicos ;; djgpp) basic_machine=i586-pc os=-msdosdjgpp ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2* | dpx2*-bull) basic_machine=m68k-bull os=-sysv3 ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson os=-ose ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; go32) basic_machine=i386-pc os=-go32 ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; h8300xray) basic_machine=h8300-hitachi os=-xray ;; h8500hms) basic_machine=h8500-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) basic_machine=hppa1.1-hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppa-next) os=-nextstep3 ;; hppaosf) basic_machine=hppa1.1-hp os=-osf ;; hppro) basic_machine=hppa1.1-hp os=-proelf ;; i370-ibm* | ibm*) basic_machine=i370-ibm ;; i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; i386-vsta | vsta) basic_machine=i386-unknown os=-vsta ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; m68knommu) basic_machine=m68k-unknown os=-linux ;; m68knommu-*) basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; m88k-omron*) basic_machine=m88k-omron ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; microblaze*) basic_machine=microblaze-xilinx ;; mingw64) basic_machine=x86_64-pc os=-mingw64 ;; mingw32) basic_machine=i686-pc os=-mingw32 ;; mingw32ce) basic_machine=arm-unknown os=-mingw32ce ;; miniframe) basic_machine=m68000-convergent ;; *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) basic_machine=m68k-atari os=-mint ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; monitor) basic_machine=m68k-rom68k os=-coff ;; morphos) basic_machine=powerpc-unknown os=-morphos ;; moxiebox) basic_machine=moxie-unknown os=-moxiebox ;; msdos) basic_machine=i386-pc os=-msdos ;; ms1-*) basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` ;; msys) basic_machine=i686-pc os=-msys ;; mvs) basic_machine=i370-ibm os=-mvs ;; nacl) basic_machine=le32-unknown os=-nacl ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; netbsd386) basic_machine=i386-unknown os=-netbsd ;; netwinder) basic_machine=armv4l-rebel os=-linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; necv70) basic_machine=v70-nec os=-sysv ;; next | m*-next ) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; mon960) basic_machine=i960-intel os=-mon960 ;; nonstopux) basic_machine=mips-compaq os=-nonstopux ;; np1) basic_machine=np1-gould ;; neo-tandem) basic_machine=neo-tandem ;; nse-tandem) basic_machine=nse-tandem ;; nsr-tandem) basic_machine=nsr-tandem ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf ;; openrisc | openrisc-*) basic_machine=or32-unknown ;; os400) basic_machine=powerpc-ibm os=-os400 ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose ;; os68k) basic_machine=m68k-none os=-os68k ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; parisc) basic_machine=hppa-unknown os=-linux ;; parisc-*) basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pc98) basic_machine=i386-pc ;; pc98-*) basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; pentium4) basic_machine=i786-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium4-*) basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc | ppcbe) basic_machine=powerpc-unknown ;; ppc-* | ppcbe-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little | ppc64-le | powerpc64-little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; pw32) basic_machine=i586-unknown os=-pw32 ;; rdos | rdos64) basic_machine=x86_64-pc os=-rdos ;; rdos32) basic_machine=i386-pc os=-rdos ;; rom68k) basic_machine=m68k-rom68k os=-coff ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; s390 | s390-*) basic_machine=s390-ibm ;; s390x | s390x-*) basic_machine=s390x-ibm ;; sa29200) basic_machine=a29k-amd os=-udi ;; sb1) basic_machine=mipsisa64sb1-unknown ;; sb1el) basic_machine=mipsisa64sb1el-unknown ;; sde) basic_machine=mipsisa32-sde os=-elf ;; sei) basic_machine=mips-sei os=-seiux ;; sequent) basic_machine=i386-sequent ;; sh) basic_machine=sh-hitachi os=-hms ;; sh5el) basic_machine=sh5le-unknown ;; sh64) basic_machine=sh64-unknown ;; sparclite-wrs | simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; st2000) basic_machine=m68k-tandem ;; stratus) basic_machine=i860-stratus os=-sysv4 ;; strongarm-* | thumb-*) basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; sv1) basic_machine=sv1-cray os=-unicos ;; symmetry) basic_machine=i386-sequent os=-dynix ;; t3e) basic_machine=alphaev5-cray os=-unicos ;; t90) basic_machine=t90-cray os=-unicos ;; tile*) basic_machine=$basic_machine-unknown os=-linux-gnu ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; toad1) basic_machine=pdp10-xkl os=-tops20 ;; tower | tower-32) basic_machine=m68k-ncr ;; tpf) basic_machine=s390x-ibm os=-tpf ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; v810 | necv810) basic_machine=v810-nec os=-none ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; w65*) basic_machine=w65-wdc os=-none ;; w89k-*) basic_machine=hppa1.1-winbond os=-proelf ;; xbox) basic_machine=i686-pc os=-mingw32 ;; xps | xps100) basic_machine=xps100-honeywell ;; xscale-* | xscalee[bl]-*) basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` ;; ymp) basic_machine=ymp-cray os=-unicos ;; z8k-*-coff) basic_machine=z8k-unknown os=-sim ;; z80-*-coff) basic_machine=z80-unknown os=-sim ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) basic_machine=hppa1.1-winbond ;; op50n) basic_machine=hppa1.1-oki ;; op60c) basic_machine=hppa1.1-oki ;; romp) basic_machine=romp-ibm ;; mmix) basic_machine=mmix-knuth ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp10) # there are many clones, so DEC is not a safe bet basic_machine=pdp10-unknown ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) basic_machine=sparc-sun ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; mac | mpw | mac-mpw) basic_machine=m68k-apple ;; pmac | pmac-mpw) basic_machine=powerpc-apple ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. -auroraux) os=-auroraux ;; -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -svr4*) os=-sysv4 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # First accept the basic system types. # The portable systems comes first. # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ | -sym* | -kopensolaris* | -plan9* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* | -aros* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ | -bitrig* | -openbsd* | -solidbsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* | -cegcc* \ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ | -linux-newlib* | -linux-musl* | -linux-uclibc* \ | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) case $basic_machine in x86-* | i*86-*) ;; *) os=-nto$os ;; esac ;; -nto-qnx*) ;; -nto*) os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; -linux-dietlibc) os=-linux-dietlibc ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo $os | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition ;; -os400*) os=-os400 ;; -wince*) os=-wince ;; -osfrose*) os=-osfrose ;; -osf*) os=-osf ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -atheos*) os=-atheos ;; -syllable*) os=-syllable ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; -nova*) os=-rtmk-nova ;; -ns2 ) os=-nextstep2 ;; -nsk*) os=-nsk ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -tpf*) os=-tpf ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -ose*) os=-ose ;; -es1800*) os=-ose ;; -xenix) os=-xenix ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -aros*) os=-aros ;; -zvmoe) os=-zvmoe ;; -dicos*) os=-dicos ;; -nacl*) ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in score-*) os=-elf ;; spu-*) os=-elf ;; *-acorn) os=-riscix1.2 ;; arm*-rebel) os=-linux ;; arm*-semi) os=-aout ;; c4x-* | tic4x-*) os=-coff ;; c8051-*) os=-elf ;; hexagon-*) os=-elf ;; tic54x-*) os=-coff ;; tic55x-*) os=-coff ;; tic6x-*) os=-coff ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 ;; m68*-cisco) os=-aout ;; mep-*) os=-elf ;; mips*-cisco) os=-elf ;; mips*-*) os=-elf ;; or32-*) os=-coff ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; *-be) os=-beos ;; *-haiku) os=-haiku ;; *-ibm) os=-aix ;; *-knuth) os=-mmixware ;; *-wec) os=-proelf ;; *-winbond) os=-proelf ;; *-oki) os=-proelf ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next ) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-next) os=-nextstep3 ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) os=-coff ;; *-*bug) os=-coff ;; *-apple) os=-macos ;; *-atari*) os=-mint ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -cnk*|-aix*) vendor=ibm ;; -beos*) vendor=be ;; -hpux*) vendor=hp ;; -mpeix*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs* | -opened*) vendor=ibm ;; -os400*) vendor=ibm ;; -ptx*) vendor=sequent ;; -tpf*) vendor=ibm ;; -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) vendor=apple ;; -hms*) vendor=hitachi ;; -mpw* | -macos*) vendor=apple ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; -vos*) vendor=stratus ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os exit # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: parlatype-1.5.4/libparlatype/0000755000175000017500000000000013204324053013207 500000000000000parlatype-1.5.4/libparlatype/data/0000755000175000017500000000000013204324043014117 500000000000000parlatype-1.5.4/libparlatype/data/Makefile.in0000644000175000017500000006312713204324033016114 00000000000000# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = data DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ $(srcdir)/parlatype.pc.in $(srcdir)/parlatype.xml.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_code_coverage.m4 \ $(top_srcdir)/m4/ax_valgrind_check.m4 \ $(top_srcdir)/m4/glibtests.m4 $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = parlatype.pc parlatype.xml CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(glade_catalogdir)" \ "$(DESTDIR)$(pkgconfigdir)" DATA = $(glade_catalog_DATA) $(pkgconfig_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ distdir am__extra_recursive_targets = check-valgrind-recursive \ check-valgrind-memcheck-recursive \ check-valgrind-helgrind-recursive check-valgrind-drd-recursive \ check-valgrind-sgcheck-recursive am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags DIST_SUBDIRS = icons DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ CODE_COVERAGE_CPPFLAGS = @CODE_COVERAGE_CPPFLAGS@ CODE_COVERAGE_CXXFLAGS = @CODE_COVERAGE_CXXFLAGS@ CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ CODE_COVERAGE_LIBS = @CODE_COVERAGE_LIBS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_VALGRIND_drd = @ENABLE_VALGRIND_drd@ ENABLE_VALGRIND_helgrind = @ENABLE_VALGRIND_helgrind@ ENABLE_VALGRIND_memcheck = @ENABLE_VALGRIND_memcheck@ ENABLE_VALGRIND_sgcheck = @ENABLE_VALGRIND_sgcheck@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GCOV = @GCOV@ GENHTML = @GENHTML@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLADE_CATALOG_DIR = @GLADE_CATALOG_DIR@ GLADE_CFLAGS = @GLADE_CFLAGS@ GLADE_LIBS = @GLADE_LIBS@ GLADE_PIXMAP_DIR = @GLADE_PIXMAP_DIR@ GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ GSTREAMER_CFLAGS = @GSTREAMER_CFLAGS@ GSTREAMER_LIBS = @GSTREAMER_LIBS@ GTKDOC_CHECK = @GTKDOC_CHECK@ GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ GTKDOC_REBASE = @GTKDOC_REBASE@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ HTML_DIR = @HTML_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ LCOV = @LCOV@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PARLATYPE_API_VERSION = @PARLATYPE_API_VERSION@ PARLATYPE_SO_VERSION = @PARLATYPE_SO_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VALGRIND = @VALGRIND@ VALGRIND_ENABLED = @VALGRIND_ENABLED@ VERSION = @VERSION@ WARNINGCFLAGS = @WARNINGCFLAGS@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gsettingsschemadir = @gsettingsschemadir@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ installed_test_metadir = @installed_test_metadir@ installed_testdir = @installed_testdir@ intltool__v_merge_options_ = @intltool__v_merge_options_@ intltool__v_merge_options_0 = @intltool__v_merge_options_0@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ valgrind_enabled_tools = @valgrind_enabled_tools@ valgrind_tools = @valgrind_tools@ pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = parlatype.pc @GLADE_CATALOG_TRUE@SUBDIRS = icons @GLADE_CATALOG_TRUE@glade_catalogdir = $(GLADE_CATALOG_DIR) @GLADE_CATALOG_TRUE@glade_catalog_DATA = parlatype.xml all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): parlatype.pc: $(top_builddir)/config.status $(srcdir)/parlatype.pc.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ parlatype.xml: $(top_builddir)/config.status $(srcdir)/parlatype.xml.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-glade_catalogDATA: $(glade_catalog_DATA) @$(NORMAL_INSTALL) @list='$(glade_catalog_DATA)'; test -n "$(glade_catalogdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(glade_catalogdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(glade_catalogdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(glade_catalogdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(glade_catalogdir)" || exit $$?; \ done uninstall-glade_catalogDATA: @$(NORMAL_UNINSTALL) @list='$(glade_catalog_DATA)'; test -n "$(glade_catalogdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(glade_catalogdir)'; $(am__uninstall_files_from_dir) install-pkgconfigDATA: $(pkgconfig_DATA) @$(NORMAL_INSTALL) @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ done uninstall-pkgconfigDATA: @$(NORMAL_UNINSTALL) @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" check-valgrind-local: check-valgrind-memcheck-local: check-valgrind-helgrind-local: check-valgrind-drd-local: check-valgrind-sgcheck-local: ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile $(DATA) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(glade_catalogdir)" "$(DESTDIR)$(pkgconfigdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." check-valgrind: check-valgrind-recursive check-valgrind-am: check-valgrind-local check-valgrind-drd: check-valgrind-drd-recursive check-valgrind-drd-am: check-valgrind-drd-local check-valgrind-helgrind: check-valgrind-helgrind-recursive check-valgrind-helgrind-am: check-valgrind-helgrind-local check-valgrind-memcheck: check-valgrind-memcheck-recursive check-valgrind-memcheck-am: check-valgrind-memcheck-local check-valgrind-sgcheck: check-valgrind-sgcheck-recursive check-valgrind-sgcheck-am: check-valgrind-sgcheck-local clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-glade_catalogDATA install-pkgconfigDATA install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-glade_catalogDATA uninstall-pkgconfigDATA .MAKE: $(am__recursive_targets) install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ check-am check-valgrind-am check-valgrind-drd-am \ check-valgrind-drd-local check-valgrind-helgrind-am \ check-valgrind-helgrind-local check-valgrind-local \ check-valgrind-memcheck-am check-valgrind-memcheck-local \ check-valgrind-sgcheck-am check-valgrind-sgcheck-local clean \ clean-generic clean-libtool cscopelist-am ctags ctags-am \ distclean distclean-generic distclean-libtool distclean-tags \ distdir dvi dvi-am html html-am info info-am install \ install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am \ install-glade_catalogDATA install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-pkgconfigDATA install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am tags tags-am uninstall uninstall-am \ uninstall-glade_catalogDATA uninstall-pkgconfigDATA @GLADE_CATALOG_TRUE@validate: $(glade_catalog_DATA) @GLADE_CATALOG_TRUE@ xmllint --dtdvalid $(GLADE_CATALOG_DIR)/glade-catalog.dtd --noout $< # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: parlatype-1.5.4/libparlatype/data/parlatype.xml.in0000644000175000017500000000124213176574164017211 00000000000000 parlatype-1.5.4/libparlatype/data/icons/0000755000175000017500000000000013204324043015232 500000000000000parlatype-1.5.4/libparlatype/data/icons/Makefile.in0000644000175000017500000004570213204324033017226 00000000000000# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = data/icons DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_code_coverage.m4 \ $(top_srcdir)/m4/ax_valgrind_check.m4 \ $(top_srcdir)/m4/glibtests.m4 $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(iconglade16dir)" \ "$(DESTDIR)$(iconglade22dir)" DATA = $(iconglade16_DATA) $(iconglade22_DATA) am__extra_recursive_targets = check-valgrind-recursive \ check-valgrind-memcheck-recursive \ check-valgrind-helgrind-recursive check-valgrind-drd-recursive \ check-valgrind-sgcheck-recursive am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ CODE_COVERAGE_CPPFLAGS = @CODE_COVERAGE_CPPFLAGS@ CODE_COVERAGE_CXXFLAGS = @CODE_COVERAGE_CXXFLAGS@ CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ CODE_COVERAGE_LIBS = @CODE_COVERAGE_LIBS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_VALGRIND_drd = @ENABLE_VALGRIND_drd@ ENABLE_VALGRIND_helgrind = @ENABLE_VALGRIND_helgrind@ ENABLE_VALGRIND_memcheck = @ENABLE_VALGRIND_memcheck@ ENABLE_VALGRIND_sgcheck = @ENABLE_VALGRIND_sgcheck@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GCOV = @GCOV@ GENHTML = @GENHTML@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLADE_CATALOG_DIR = @GLADE_CATALOG_DIR@ GLADE_CFLAGS = @GLADE_CFLAGS@ GLADE_LIBS = @GLADE_LIBS@ GLADE_PIXMAP_DIR = @GLADE_PIXMAP_DIR@ GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ GSTREAMER_CFLAGS = @GSTREAMER_CFLAGS@ GSTREAMER_LIBS = @GSTREAMER_LIBS@ GTKDOC_CHECK = @GTKDOC_CHECK@ GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ GTKDOC_REBASE = @GTKDOC_REBASE@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ HTML_DIR = @HTML_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ LCOV = @LCOV@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PARLATYPE_API_VERSION = @PARLATYPE_API_VERSION@ PARLATYPE_SO_VERSION = @PARLATYPE_SO_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VALGRIND = @VALGRIND@ VALGRIND_ENABLED = @VALGRIND_ENABLED@ VERSION = @VERSION@ WARNINGCFLAGS = @WARNINGCFLAGS@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gsettingsschemadir = @gsettingsschemadir@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ installed_test_metadir = @installed_test_metadir@ installed_testdir = @installed_testdir@ intltool__v_merge_options_ = @intltool__v_merge_options_@ intltool__v_merge_options_0 = @intltool__v_merge_options_0@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ valgrind_enabled_tools = @valgrind_enabled_tools@ valgrind_tools = @valgrind_tools@ iconglade16dir = $(GLADE_PIXMAP_DIR)/hicolor/16x16/actions iconglade16_DATA = 16x16/actions/widget-pt-waveviewer.png iconglade22dir = $(GLADE_PIXMAP_DIR)/hicolor/22x22/actions iconglade22_DATA = 22x22/actions/widget-pt-waveviewer.png EXTRA_DIST = \ $(iconglade16_DATA) \ $(iconglade22_DATA) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/icons/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-iconglade16DATA: $(iconglade16_DATA) @$(NORMAL_INSTALL) @list='$(iconglade16_DATA)'; test -n "$(iconglade16dir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(iconglade16dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(iconglade16dir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconglade16dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(iconglade16dir)" || exit $$?; \ done uninstall-iconglade16DATA: @$(NORMAL_UNINSTALL) @list='$(iconglade16_DATA)'; test -n "$(iconglade16dir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(iconglade16dir)'; $(am__uninstall_files_from_dir) install-iconglade22DATA: $(iconglade22_DATA) @$(NORMAL_INSTALL) @list='$(iconglade22_DATA)'; test -n "$(iconglade22dir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(iconglade22dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(iconglade22dir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconglade22dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(iconglade22dir)" || exit $$?; \ done uninstall-iconglade22DATA: @$(NORMAL_UNINSTALL) @list='$(iconglade22_DATA)'; test -n "$(iconglade22dir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(iconglade22dir)'; $(am__uninstall_files_from_dir) check-valgrind-local: check-valgrind-memcheck-local: check-valgrind-helgrind-local: check-valgrind-drd-local: check-valgrind-sgcheck-local: tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(iconglade16dir)" "$(DESTDIR)$(iconglade22dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." check-valgrind: check-valgrind-am check-valgrind-am: check-valgrind-local check-valgrind-drd: check-valgrind-drd-am check-valgrind-drd-am: check-valgrind-drd-local check-valgrind-helgrind: check-valgrind-helgrind-am check-valgrind-helgrind-am: check-valgrind-helgrind-local check-valgrind-memcheck: check-valgrind-memcheck-am check-valgrind-memcheck-am: check-valgrind-memcheck-local check-valgrind-sgcheck: check-valgrind-sgcheck-am check-valgrind-sgcheck-am: check-valgrind-sgcheck-local clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-iconglade16DATA install-iconglade22DATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-iconglade16DATA uninstall-iconglade22DATA .MAKE: install-am install-strip .PHONY: all all-am check check-am check-valgrind-am \ check-valgrind-drd-am check-valgrind-drd-local \ check-valgrind-helgrind-am check-valgrind-helgrind-local \ check-valgrind-local check-valgrind-memcheck-am \ check-valgrind-memcheck-local check-valgrind-sgcheck-am \ check-valgrind-sgcheck-local clean clean-generic clean-libtool \ cscopelist-am ctags-am distclean distclean-generic \ distclean-libtool distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-iconglade16DATA \ install-iconglade22DATA install-info install-info-am \ install-man install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am tags-am uninstall uninstall-am \ uninstall-iconglade16DATA uninstall-iconglade22DATA # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: parlatype-1.5.4/libparlatype/data/icons/22x22/0000755000175000017500000000000013204324043016011 500000000000000parlatype-1.5.4/libparlatype/data/icons/22x22/actions/0000755000175000017500000000000013204324043017451 500000000000000parlatype-1.5.4/libparlatype/data/icons/22x22/actions/widget-pt-waveviewer.png0000644000175000017500000000026013176574164024206 00000000000000PNG  IHDRĴl;wIDAT8c @ @ 3pwwB&ah0M{2R\DIZg #rYlʕ+a1 .B6`!V!jh,t.X}V)|J@ulIENDB`parlatype-1.5.4/libparlatype/data/icons/16x16/0000755000175000017500000000000013204324043016017 500000000000000parlatype-1.5.4/libparlatype/data/icons/16x16/actions/0000755000175000017500000000000013204324043017457 500000000000000parlatype-1.5.4/libparlatype/data/icons/16x16/actions/widget-pt-waveviewer.png0000644000175000017500000000023013176574164024211 00000000000000PNG  IHDRa_IDAT8c`@3 (bƒ:. &\jra>| @*0Xr%#C[ aA FU 9R*88FIENDB`parlatype-1.5.4/libparlatype/data/icons/Makefile.am0000644000175000017500000000045113176574164017231 00000000000000iconglade16dir = $(GLADE_PIXMAP_DIR)/hicolor/16x16/actions iconglade16_DATA = 16x16/actions/widget-pt-waveviewer.png iconglade22dir = $(GLADE_PIXMAP_DIR)/hicolor/22x22/actions iconglade22_DATA = 22x22/actions/widget-pt-waveviewer.png EXTRA_DIST = \ $(iconglade16_DATA) \ $(iconglade22_DATA) parlatype-1.5.4/libparlatype/data/parlatype.pc.in0000644000175000017500000000045413171727132017005 00000000000000prefix=@prefix@ exec_prefix=@exec_prefix@ libdir=@libdir@ includedir=@includedir@ Name: @PACKAGE_NAME@ Version: @PACKAGE_VERSION@ Description: libparlatype, core support for parlatype Requires.private: gstreamer-1.0 Requires: gtk+-3.0 Libs: -L${libdir} -lparlatype Cflags: -I${includedir}/parlatype parlatype-1.5.4/libparlatype/data/Makefile.am0000644000175000017500000000043713176574164016122 00000000000000pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = parlatype.pc if GLADE_CATALOG SUBDIRS = icons glade_catalogdir = $(GLADE_CATALOG_DIR) glade_catalog_DATA = parlatype.xml validate: $(glade_catalog_DATA) xmllint --dtdvalid $(GLADE_CATALOG_DIR)/glade-catalog.dtd --noout $< endif parlatype-1.5.4/libparlatype/compile0000755000175000017500000001624513167645076014540 00000000000000#! /bin/sh # Wrapper for compilers which do not understand '-c -o'. scriptversion=2012-10-14.11; # UTC # Copyright (C) 1999-2013 Free Software Foundation, Inc. # Written by Tom Tromey . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # This file is maintained in Automake, please report # bugs to or send patches to # . nl=' ' # We need space, tab and new line, in precisely that order. Quoting is # there to prevent tools from complaining about whitespace usage. IFS=" "" $nl" file_conv= # func_file_conv build_file lazy # Convert a $build file to $host form and store it in $file # Currently only supports Windows hosts. If the determined conversion # type is listed in (the comma separated) LAZY, no conversion will # take place. func_file_conv () { file=$1 case $file in / | /[!/]*) # absolute file, and not a UNC file if test -z "$file_conv"; then # lazily determine how to convert abs files case `uname -s` in MINGW*) file_conv=mingw ;; CYGWIN*) file_conv=cygwin ;; *) file_conv=wine ;; esac fi case $file_conv/,$2, in *,$file_conv,*) ;; mingw/*) file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` ;; cygwin/*) file=`cygpath -m "$file" || echo "$file"` ;; wine/*) file=`winepath -w "$file" || echo "$file"` ;; esac ;; esac } # func_cl_dashL linkdir # Make cl look for libraries in LINKDIR func_cl_dashL () { func_file_conv "$1" if test -z "$lib_path"; then lib_path=$file else lib_path="$lib_path;$file" fi linker_opts="$linker_opts -LIBPATH:$file" } # func_cl_dashl library # Do a library search-path lookup for cl func_cl_dashl () { lib=$1 found=no save_IFS=$IFS IFS=';' for dir in $lib_path $LIB do IFS=$save_IFS if $shared && test -f "$dir/$lib.dll.lib"; then found=yes lib=$dir/$lib.dll.lib break fi if test -f "$dir/$lib.lib"; then found=yes lib=$dir/$lib.lib break fi if test -f "$dir/lib$lib.a"; then found=yes lib=$dir/lib$lib.a break fi done IFS=$save_IFS if test "$found" != yes; then lib=$lib.lib fi } # func_cl_wrapper cl arg... # Adjust compile command to suit cl func_cl_wrapper () { # Assume a capable shell lib_path= shared=: linker_opts= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as 'compile cc -o foo foo.c'. eat=1 case $2 in *.o | *.[oO][bB][jJ]) func_file_conv "$2" set x "$@" -Fo"$file" shift ;; *) func_file_conv "$2" set x "$@" -Fe"$file" shift ;; esac ;; -I) eat=1 func_file_conv "$2" mingw set x "$@" -I"$file" shift ;; -I*) func_file_conv "${1#-I}" mingw set x "$@" -I"$file" shift ;; -l) eat=1 func_cl_dashl "$2" set x "$@" "$lib" shift ;; -l*) func_cl_dashl "${1#-l}" set x "$@" "$lib" shift ;; -L) eat=1 func_cl_dashL "$2" ;; -L*) func_cl_dashL "${1#-L}" ;; -static) shared=false ;; -Wl,*) arg=${1#-Wl,} save_ifs="$IFS"; IFS=',' for flag in $arg; do IFS="$save_ifs" linker_opts="$linker_opts $flag" done IFS="$save_ifs" ;; -Xlinker) eat=1 linker_opts="$linker_opts $2" ;; -*) set x "$@" "$1" shift ;; *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) func_file_conv "$1" set x "$@" -Tp"$file" shift ;; *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) func_file_conv "$1" mingw set x "$@" "$file" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -n "$linker_opts"; then linker_opts="-link$linker_opts" fi exec "$@" $linker_opts exit 1 } eat= case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: compile [--help] [--version] PROGRAM [ARGS] Wrapper for compilers which do not understand '-c -o'. Remove '-o dest.o' from ARGS, run PROGRAM with the remaining arguments, and rename the output as expected. If you are trying to build a whole package this is not the right script to run: please start by reading the file 'INSTALL'. Report bugs to . EOF exit $? ;; -v | --v*) echo "compile $scriptversion" exit $? ;; cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) func_cl_wrapper "$@" # Doesn't return... ;; esac ofile= cfile= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as 'compile cc -o foo foo.c'. # So we strip '-o arg' only if arg is an object. eat=1 case $2 in *.o | *.obj) ofile=$2 ;; *) set x "$@" -o "$2" shift ;; esac ;; *.c) cfile=$1 set x "$@" "$1" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -z "$ofile" || test -z "$cfile"; then # If no '-o' option was seen then we might have been invoked from a # pattern rule where we don't need one. That is ok -- this is a # normal compilation that the losing compiler can handle. If no # '.c' file was seen then we are probably linking. That is also # ok. exec "$@" fi # Name of file we expect compiler to create. cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` # Create the lock directory. # Note: use '[/\\:.-]' here to ensure that we don't use the same name # that we are using for the .o file. Also, base the name on the expected # object file name, since that is what matters with a parallel build. lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d while true; do if mkdir "$lockdir" >/dev/null 2>&1; then break fi sleep 1 done # FIXME: race condition here if user kills between mkdir and trap. trap "rmdir '$lockdir'; exit 1" 1 2 15 # Run the compile. "$@" ret=$? if test -f "$cofile"; then test "$cofile" = "$ofile" || mv "$cofile" "$ofile" elif test -f "${cofile}bj"; then test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" fi rmdir "$lockdir" exit $ret # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: parlatype-1.5.4/libparlatype/configure0000755000175000017500000242152513204324034015050 00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.69 for libparlatype 1.5.4. # # Report bugs to . # # # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. # # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # Use a proper internal environment variable to ensure we don't fall # into an infinite loop, continuously re-executing ourselves. if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then _as_can_reexec=no; export _as_can_reexec; # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 as_fn_exit 255 fi # We don't want this to propagate to other subprocesses. { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : else exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1 test -x / || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO PATH=/empty FPATH=/empty; export PATH FPATH test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1 test \$(( 1 + 1 )) = 2 || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir/$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : CONFIG_SHELL=$as_shell as_have_required=yes if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : break 2 fi fi done;; esac as_found=false done $as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : CONFIG_SHELL=$SHELL as_have_required=yes fi; } IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : export CONFIG_SHELL # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 fi if test x$as_have_required = xno; then : $as_echo "$0: This script requires a shell more modern than all" $as_echo "$0: the shells that I found on your system." if test x${ZSH_VERSION+set} = xset ; then $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" $as_echo "$0: be upgraded to zsh 4.3.4 or later." else $as_echo "$0: Please tell bug-autoconf@gnu.org and $0: https://github.com/gkarsay/parlatype/issues about your $0: system, including any error possibly output before this $0: message. Then install a modern shell, or manually run $0: the script under such a shell if you do have one." fi exit 1 fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # If we had to re-execute with $CONFIG_SHELL, we're ensured to have # already done that, so ensure we don't try to do so again and fall # in an infinite loop. This has already happened in practice. _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" SHELL=${CONFIG_SHELL-/bin/sh} test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME='libparlatype' PACKAGE_TARNAME='libparlatype' PACKAGE_VERSION='1.5.4' PACKAGE_STRING='libparlatype 1.5.4' PACKAGE_BUGREPORT='https://github.com/gkarsay/parlatype/issues' PACKAGE_URL='' ac_unique_file="src/pt-player.c" # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS LIBOBJS CODE_COVERAGE_RULES CODE_COVERAGE_LDFLAGS CODE_COVERAGE_LIBS CODE_COVERAGE_CXXFLAGS CODE_COVERAGE_CFLAGS CODE_COVERAGE_CPPFLAGS GENHTML LCOV GCOV CODE_COVERAGE_ENABLED CODE_COVERAGE_ENABLED_FALSE CODE_COVERAGE_ENABLED_TRUE VALGRIND_CHECK_RULES valgrind_enabled_tools valgrind_tools ENABLE_VALGRIND_sgcheck ENABLE_VALGRIND_drd ENABLE_VALGRIND_helgrind ENABLE_VALGRIND_memcheck VALGRIND_ENABLED VALGRIND_ENABLED_FALSE VALGRIND_ENABLED_TRUE VALGRIND installed_testdir installed_test_metadir ENABLE_ALWAYS_BUILD_TESTS_FALSE ENABLE_ALWAYS_BUILD_TESTS_TRUE ENABLE_INSTALLED_TESTS_FALSE ENABLE_INSTALLED_TESTS_TRUE WITH_TESTS_FALSE WITH_TESTS_TRUE GLADE_CATALOG_DIR GLADE_PIXMAP_DIR GLADE_LIBS GLADE_CFLAGS GLADE_CATALOG_FALSE GLADE_CATALOG_TRUE HAVE_INTROSPECTION_FALSE HAVE_INTROSPECTION_TRUE INTROSPECTION_MAKEFILE INTROSPECTION_LIBS INTROSPECTION_CFLAGS INTROSPECTION_TYPELIBDIR INTROSPECTION_GIRDIR INTROSPECTION_GENERATE INTROSPECTION_COMPILER INTROSPECTION_SCANNER GTK_DOC_USE_REBASE_FALSE GTK_DOC_USE_REBASE_TRUE GTK_DOC_USE_LIBTOOL_FALSE GTK_DOC_USE_LIBTOOL_TRUE GTK_DOC_BUILD_PDF_FALSE GTK_DOC_BUILD_PDF_TRUE GTK_DOC_BUILD_HTML_FALSE GTK_DOC_BUILD_HTML_TRUE ENABLE_GTK_DOC_FALSE ENABLE_GTK_DOC_TRUE HAVE_GTK_DOC_FALSE HAVE_GTK_DOC_TRUE GTKDOC_DEPS_LIBS GTKDOC_DEPS_CFLAGS HTML_DIR GTKDOC_MKPDF GTKDOC_REBASE GTKDOC_CHECK_PATH GTKDOC_CHECK WARNINGCFLAGS GSTREAMER_LIBS GSTREAMER_CFLAGS GTK_LIBS GTK_CFLAGS GLIB_COMPILE_RESOURCES GSETTINGS_RULES GLIB_COMPILE_SCHEMAS gsettingsschemadir PKG_CONFIG_LIBDIR PKG_CONFIG_PATH PKG_CONFIG GSETTINGS_DISABLE_SCHEMAS_COMPILE CXXCPP am__fastdepCXX_FALSE am__fastdepCXX_TRUE CXXDEPMODE ac_ct_CXX CXXFLAGS CXX PARLATYPE_API_VERSION PARLATYPE_SO_VERSION CPP OTOOL64 OTOOL LIPO NMEDIT DSYMUTIL MANIFEST_TOOL RANLIB ac_ct_AR AR DLLTOOL OBJDUMP LN_S NM ac_ct_DUMPBIN DUMPBIN LD FGREP EGREP GREP SED host_os host_vendor host_cpu host build_os build_vendor build_cpu build LIBTOOL DATADIRNAME am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE am__nodep AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE am__quote am__include DEPDIR OBJEXT EXEEXT ac_ct_CC CPPFLAGS LDFLAGS CFLAGS CC ALL_LINGUAS INTLTOOL_PERL GMSGFMT MSGFMT MSGMERGE XGETTEXT INTLTOOL_POLICY_RULE INTLTOOL_SERVICE_RULE INTLTOOL_THEME_RULE INTLTOOL_SCHEMAS_RULE INTLTOOL_CAVES_RULE INTLTOOL_XML_NOMERGE_RULE INTLTOOL_XML_RULE INTLTOOL_KBD_RULE INTLTOOL_XAM_RULE INTLTOOL_UI_RULE INTLTOOL_SOUNDLIST_RULE INTLTOOL_SHEET_RULE INTLTOOL_SERVER_RULE INTLTOOL_PONG_RULE INTLTOOL_OAF_RULE INTLTOOL_PROP_RULE INTLTOOL_KEYS_RULE INTLTOOL_DIRECTORY_RULE INTLTOOL_DESKTOP_RULE intltool__v_merge_options_0 intltool__v_merge_options_ INTLTOOL_V_MERGE_OPTIONS INTLTOOL__v_MERGE_0 INTLTOOL__v_MERGE_ INTLTOOL_V_MERGE INTLTOOL_EXTRACT INTLTOOL_MERGE INTLTOOL_UPDATE USE_NLS GETTEXT_PACKAGE AM_BACKSLASH AM_DEFAULT_VERBOSITY AM_DEFAULT_V AM_V am__untar am__tar AMTAR am__leading_dot SET_MAKE AWK mkdir_p MKDIR_P INSTALL_STRIP_PROGRAM STRIP install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking enable_silent_rules enable_nls enable_dependency_tracking enable_static enable_shared with_pic enable_fast_install with_gnu_ld with_sysroot enable_libtool_lock enable_schemas_compile with_html_dir enable_gtk_doc enable_gtk_doc_html enable_gtk_doc_pdf enable_introspection enable_glade_catalog enable_tests enable_installed_tests enable_always_build_tests enable_valgrind enable_valgrind_memcheck enable_valgrind_helgrind enable_valgrind_drd enable_valgrind_sgcheck with_gcov enable_code_coverage ' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS CPP CXX CXXFLAGS CCC CXXCPP PKG_CONFIG PKG_CONFIG_PATH PKG_CONFIG_LIBDIR GTK_CFLAGS GTK_LIBS GSTREAMER_CFLAGS GSTREAMER_LIBS GTKDOC_DEPS_CFLAGS GTKDOC_DEPS_LIBS GLADE_CFLAGS GLADE_LIBS' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *=) ac_optarg= ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error $? "unrecognized option: \`$ac_option' Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures libparlatype 1.5.4 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/libparlatype] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of libparlatype 1.5.4:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-silent-rules less verbose build output (undo: "make V=1") --disable-silent-rules verbose build output (undo: "make V=0") --disable-nls do not use Native Language Support --enable-dependency-tracking do not reject slow dependency extractors --disable-dependency-tracking speeds up one-time build --enable-static[=PKGS] build static libraries [default=no] --enable-shared[=PKGS] build shared libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) --disable-schemas-compile Disable regeneration of gschemas.compiled on install --enable-gtk-doc use gtk-doc to build documentation [[default=no]] --enable-gtk-doc-html build documentation in html format [[default=yes]] --enable-gtk-doc-pdf build documentation in pdf format [[default=no]] --enable-introspection=[no/auto/yes] Enable introspection for this build --enable-glade-catalog install a glade catalog file [default=no] --enable-tests build tests [default=yes] --enable-installed-tests Enable installation of some test cases --enable-always-build-tests Enable always building tests during 'make all' --enable-valgrind Whether to enable Valgrind on the unit tests --disable-valgrind-memcheck Whether to skip memcheck during the Valgrind tests --disable-valgrind-helgrind Whether to skip helgrind during the Valgrind tests --disable-valgrind-drd Whether to skip drd during the Valgrind tests --disable-valgrind-sgcheck Whether to skip sgcheck during the Valgrind tests --enable-code-coverage Whether to enable code coverage support Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use both] --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-sysroot=DIR Search for dependent libraries within DIR (or the compiler's sysroot if not specified). --with-html-dir=PATH path to installed docs --with-gcov=GCOV use given GCOV for coverage (GCOV=gcov). Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor CXX C++ compiler command CXXFLAGS C++ compiler flags CXXCPP C++ preprocessor PKG_CONFIG path to pkg-config utility PKG_CONFIG_PATH directories to add to pkg-config's search path PKG_CONFIG_LIBDIR path overriding pkg-config's built-in search path GTK_CFLAGS C compiler flags for GTK, overriding pkg-config GTK_LIBS linker flags for GTK, overriding pkg-config GSTREAMER_CFLAGS C compiler flags for GSTREAMER, overriding pkg-config GSTREAMER_LIBS linker flags for GSTREAMER, overriding pkg-config GTKDOC_DEPS_CFLAGS C compiler flags for GTKDOC_DEPS, overriding pkg-config GTKDOC_DEPS_LIBS linker flags for GTKDOC_DEPS, overriding pkg-config GLADE_CFLAGS C compiler flags for GLADE, overriding pkg-config GLADE_LIBS linker flags for GLADE, overriding pkg-config Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to . _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF libparlatype configure 1.5.4 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## # ac_fn_c_try_compile LINENO # -------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_compile # ac_fn_c_try_link LINENO # ----------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || test -x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_link # ac_fn_c_check_func LINENO FUNC VAR # ---------------------------------- # Tests whether FUNC exists, setting the cache variable VAR accordingly ac_fn_c_check_func () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Define $2 to an innocuous variant, in case declares $2. For example, HP-UX 11i declares gettimeofday. */ #define $2 innocuous_$2 /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $2 (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $2 /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $2 (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$2 || defined __stub___$2 choke me #endif int main () { return $2 (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_func # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in # INCLUDES, setting the cache variable VAR accordingly. ac_fn_c_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_compile # ac_fn_c_try_cpp LINENO # ---------------------- # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } > conftest.i && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_cpp # ac_fn_c_try_run LINENO # ---------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. Assumes # that executables *can* be run. ac_fn_c_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then : ac_retval=0 else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=$ac_status fi rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_run # ac_fn_cxx_try_compile LINENO # ---------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_cxx_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_cxx_try_compile # ac_fn_cxx_try_cpp LINENO # ------------------------ # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_cxx_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } > conftest.i && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_cxx_try_cpp # ac_fn_cxx_try_link LINENO # ------------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_cxx_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || test -x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_cxx_try_link # ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists, giving a warning if it cannot be compiled using # the include files in INCLUDES and setting the cache variable VAR # accordingly. ac_fn_c_check_header_mongrel () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if eval \${$3+:} false; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 $as_echo_n "checking $2 usability... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_header_compiler=yes else ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 $as_echo_n "checking $2 presence... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <$2> _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : ac_header_preproc=yes else ac_header_preproc=no fi rm -f conftest.err conftest.i conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( yes:no: ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ;; no:yes:* ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ( $as_echo "## ---------------------------------------------------------- ## ## Report this to https://github.com/gkarsay/parlatype/issues ## ## ---------------------------------------------------------- ##" ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else eval "$3=\$ac_header_compiler" fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_mongrel # ac_fn_c_check_type LINENO TYPE VAR INCLUDES # ------------------------------------------- # Tests whether TYPE exists after having included INCLUDES, setting cache # variable VAR accordingly. ac_fn_c_check_type () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else eval "$3=no" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { if (sizeof ($2)) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { if (sizeof (($2))) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else eval "$3=yes" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_type cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by libparlatype $as_me 1.5.4, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo $as_echo "## ---------------- ## ## Cache variables. ## ## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo $as_echo "## ----------------- ## ## Output variables. ## ## ----------------- ##" echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then $as_echo "## ------------------- ## ## File substitutions. ## ## ------------------- ##" echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then $as_echo "## ----------- ## ## confdefs.h. ## ## ----------- ##" echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h $as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_URL "$PACKAGE_URL" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then # We do not want a PATH search for config.site. case $CONFIG_SITE in #(( -*) ac_site_file1=./$CONFIG_SITE;; */*) ac_site_file1=$CONFIG_SITE;; *) ac_site_file1=./$CONFIG_SITE;; esac elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" \ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "failed to load site script $ac_site_file See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special files # actually), so we avoid doing that. DJGPP emulates it as a regular file. if test /dev/null != "$cache_file" && test -f "$cache_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_aux_dir= for ac_dir in . "$srcdir"/.; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then as_fn_error $? "cannot find install-sh, install.sh, or shtool in . \"$srcdir\"/." "$LINENO" 5 fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. am__api_version='1.14' # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if ${ac_cv_path_install+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in #(( ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". as_fn_error $? "ls -t appears to fail. Make sure there is not a broken alias in your environment" "$LINENO" 5 fi if test "$2" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$2" = conftest.file ) then # Ok. : else as_fn_error $? "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi rm -f conftest.file test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # Expand $ac_aux_dir to an absolute path. am_aux_dir=`cd "$ac_aux_dir" && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if ${ac_cv_path_mkdir+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi test -d ./--version && rmdir ./--version if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. MKDIR_P="$ac_install_sh -d" fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_AWK+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering ...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null # Check whether --enable-silent-rules was given. if test "${enable_silent_rules+set}" = set; then : enableval=$enable_silent_rules; fi case $enable_silent_rules in # ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=1;; esac am_make=${MAKE-make} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 $as_echo_n "checking whether $am_make supports nested variables... " >&6; } if ${am_cv_make_support_nested_variables+:} false; then : $as_echo_n "(cached) " >&6 else if $as_echo 'TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 $as_echo "$am_cv_make_support_nested_variables" >&6; } if test $am_cv_make_support_nested_variables = yes; then AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AM_BACKSLASH='\' if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE='libparlatype' VERSION='1.5.4' cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # mkdir_p='$(MKDIR_P)' # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AMTAR='$${TAR-tar}' # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar pax cpio none' am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' # POSIX will say in a future version that running "rm -f" with no argument # is OK; and we want to be able to make that assumption in our Makefile # recipes. So use an aggressive probe to check that the usage we want is # actually supported "in the wild" to an acceptable degree. # See automake bug#10828. # To make any issue more visible, cause the running configure to be aborted # by default if the 'rm' program in use doesn't match our expectations; the # user can still override this though. if rm -f && rm -fr && rm -rf; then : OK; else cat >&2 <<'END' Oops! Your 'rm' program seems unable to run without file operands specified on the command line, even when the '-f' option is present. This is contrary to the behaviour of most rm programs out there, and not conforming with the upcoming POSIX standard: Please tell bug-automake@gnu.org about your system, including the value of your $PATH and any error possibly output before this message. This can help us improve future automake versions. END if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then echo 'Configuration will proceed anyway, since you have set the' >&2 echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 echo >&2 else cat >&2 <<'END' Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation that behaves properly: . If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM to "yes", and re-run configure. END as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 fi fi ac_config_headers="$ac_config_headers config.h" GETTEXT_PACKAGE=libparlatype { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5 $as_echo_n "checking whether NLS is requested... " >&6; } # Check whether --enable-nls was given. if test "${enable_nls+set}" = set; then : enableval=$enable_nls; USE_NLS=$enableval else USE_NLS=yes fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 $as_echo "$USE_NLS" >&6; } DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from 'make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 $as_echo_n "checking whether the C compiler works... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi if test -z "$ac_file"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error 77 "C compiler cannot create executables See \`config.log' for more details" "$LINENO" 5; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 $as_echo_n "checking for C compiler default output file name... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of executables: cannot compile and link See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { FILE *f = fopen ("conftest.out", "w"); return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF ac_clean_files="$ac_clean_files conftest.out" # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } if test "$cross_compiling" != yes; then { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if { ac_try='./conftest$ac_cv_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details" "$LINENO" 5; } fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if ${ac_cv_objext+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of object files: cannot compile See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 $as_echo_n "checking whether $CC understands -c and -o together... " >&6; } if ${am_cv_prog_cc_c_o+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done rm -f core conftest* unset am_i fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 $as_echo "$am_cv_prog_cc_c_o" >&6; } if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if ${am_cv_CC_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi case "$am__api_version" in 1.01234) as_fn_error $? "Automake 1.5 or newer is required to use intltool" "$LINENO" 5 ;; *) ;; esac INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.50.2 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` if test -n "0.50.2"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for intltool >= 0.50.2" >&5 $as_echo_n "checking for intltool >= 0.50.2... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_APPLIED_VERSION found" >&5 $as_echo "$INTLTOOL_APPLIED_VERSION found" >&6; } test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || as_fn_error $? "Your intltool is too old. You need intltool 0.50.2 or later." "$LINENO" 5 fi # Extract the first word of "intltool-update", so it can be a program name with args. set dummy intltool-update; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_INTLTOOL_UPDATE+:} false; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_UPDATE in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_UPDATE="$INTLTOOL_UPDATE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_INTLTOOL_UPDATE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE if test -n "$INTLTOOL_UPDATE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_UPDATE" >&5 $as_echo "$INTLTOOL_UPDATE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "intltool-merge", so it can be a program name with args. set dummy intltool-merge; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_INTLTOOL_MERGE+:} false; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_MERGE in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_MERGE="$INTLTOOL_MERGE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_INTLTOOL_MERGE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_MERGE=$ac_cv_path_INTLTOOL_MERGE if test -n "$INTLTOOL_MERGE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_MERGE" >&5 $as_echo "$INTLTOOL_MERGE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "intltool-extract", so it can be a program name with args. set dummy intltool-extract; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_INTLTOOL_EXTRACT+:} false; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_EXTRACT in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_EXTRACT="$INTLTOOL_EXTRACT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_INTLTOOL_EXTRACT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_EXTRACT=$ac_cv_path_INTLTOOL_EXTRACT if test -n "$INTLTOOL_EXTRACT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_EXTRACT" >&5 $as_echo "$INTLTOOL_EXTRACT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then as_fn_error $? "The intltool scripts were not found. Please install intltool." "$LINENO" 5 fi if test -z "$AM_DEFAULT_VERBOSITY"; then AM_DEFAULT_VERBOSITY=1 fi INTLTOOL_V_MERGE='$(INTLTOOL__v_MERGE_$(V))' INTLTOOL__v_MERGE_='$(INTLTOOL__v_MERGE_$(AM_DEFAULT_VERBOSITY))' INTLTOOL__v_MERGE_0='@echo " ITMRG " $@;' INTLTOOL_V_MERGE_OPTIONS='$(intltool__v_merge_options_$(V))' intltool__v_merge_options_='$(intltool__v_merge_options_$(AM_DEFAULT_VERBOSITY))' intltool__v_merge_options_0='-q' INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -p $(top_srcdir)/po $< $@' INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge 5000; then INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u --no-translations $< $@' else INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)_it_tmp_dir=tmp.intltool.$$RANDOM && mkdir $$_it_tmp_dir && LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u $$_it_tmp_dir $< $@ && rmdir $$_it_tmp_dir' fi INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' # Check the gettext tools to make sure they are GNU # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_XGETTEXT+:} false; then : $as_echo_n "(cached) " >&6 else case $XGETTEXT in [\\/]* | ?:[\\/]*) ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi XGETTEXT=$ac_cv_path_XGETTEXT if test -n "$XGETTEXT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 $as_echo "$XGETTEXT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "msgmerge", so it can be a program name with args. set dummy msgmerge; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_MSGMERGE+:} false; then : $as_echo_n "(cached) " >&6 else case $MSGMERGE in [\\/]* | ?:[\\/]*) ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi MSGMERGE=$ac_cv_path_MSGMERGE if test -n "$MSGMERGE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 $as_echo "$MSGMERGE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_MSGFMT+:} false; then : $as_echo_n "(cached) " >&6 else case $MSGFMT in [\\/]* | ?:[\\/]*) ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi MSGFMT=$ac_cv_path_MSGFMT if test -n "$MSGFMT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 $as_echo "$MSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_GMSGFMT+:} false; then : $as_echo_n "(cached) " >&6 else case $GMSGFMT in [\\/]* | ?:[\\/]*) ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ;; esac fi GMSGFMT=$ac_cv_path_GMSGFMT if test -n "$GMSGFMT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 $as_echo "$GMSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 fi xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 fi # Extract the first word of "perl", so it can be a program name with args. set dummy perl; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_INTLTOOL_PERL+:} false; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_PERL in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL if test -n "$INTLTOOL_PERL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_PERL" >&5 $as_echo "$INTLTOOL_PERL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$INTLTOOL_PERL"; then as_fn_error $? "perl not found" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for perl >= 5.8.1" >&5 $as_echo_n "checking for perl >= 5.8.1... " >&6; } $INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 if test $? -ne 0; then as_fn_error $? "perl 5.8.1 is required for intltool" "$LINENO" 5 else IT_PERL_VERSION=`$INTLTOOL_PERL -e "printf '%vd', $^V"` { $as_echo "$as_me:${as_lineno-$LINENO}: result: $IT_PERL_VERSION" >&5 $as_echo "$IT_PERL_VERSION" >&6; } fi if test "x" != "xno-xml"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML::Parser" >&5 $as_echo_n "checking for XML::Parser... " >&6; } if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 $as_echo "ok" >&6; } else as_fn_error $? "XML::Parser perl module is required for intltool" "$LINENO" 5 fi fi # Substitute ALL_LINGUAS so we can use it in po/Makefile # Set DATADIRNAME correctly if it is not set yet # (copied from glib-gettext.m4) if test -z "$DATADIRNAME"; then cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : DATADIRNAME=share else case $host in *-*-solaris*) ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" if test "x$ac_cv_func_bind_textdomain_codeset" = xyes; then : DATADIRNAME=share else DATADIRNAME=lib fi ;; *) DATADIRNAME=lib ;; esac fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi # Check whether --enable-silent-rules was given. if test "${enable_silent_rules+set}" = set; then : enableval=$enable_silent_rules; fi case $enable_silent_rules in # ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=0;; esac am_make=${MAKE-make} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 $as_echo_n "checking whether $am_make supports nested variables... " >&6; } if ${am_cv_make_support_nested_variables+:} false; then : $as_echo_n "(cached) " >&6 else if $as_echo 'TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 $as_echo "$am_cv_make_support_nested_variables" >&6; } if test $am_cv_make_support_nested_variables = yes; then AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AM_BACKSLASH='\' case `pwd` in *\ * | *\ *) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 $as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; esac macro_version='2.4.2' macro_revision='1.3337' ltmain="$ac_aux_dir/ltmain.sh" # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } if ${ac_cv_build+:} false; then : $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; *) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' set x $ac_cv_build shift build_cpu=$1 build_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: build_os=$* IFS=$ac_save_IFS case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } if ${ac_cv_host+:} false; then : $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; *) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' set x $ac_cv_host shift host_cpu=$1 host_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: host_os=$* IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac # Backslashify metacharacters that are still active within # double-quoted strings. sed_quote_subst='s/\(["`$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 $as_echo_n "checking how to print strings... " >&6; } # Test print first, because it will be a builtin if present. if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='print -r --' elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='printf %s\n' else # Use this function as a fallback that always works. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } ECHO='func_fallback_echo' fi # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "" } case "$ECHO" in printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 $as_echo "printf" >&6; } ;; print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 $as_echo "print -r" >&6; } ;; *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 $as_echo "cat" >&6; } ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 $as_echo_n "checking for a sed that does not truncate output... " >&6; } if ${ac_cv_path_SED+:} false; then : $as_echo_n "(cached) " >&6 else ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ for ac_i in 1 2 3 4 5 6 7; do ac_script="$ac_script$as_nl$ac_script" done echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed { ac_script=; unset ac_script;} if test -z "$SED"; then ac_path_SED_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_SED" || continue # Check for GNU ac_path_SED and select it if it is found. # Check for GNU $ac_path_SED case `"$ac_path_SED" --version 2>&1` in *GNU*) ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo '' >> "conftest.nl" "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_SED_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_SED="$ac_path_SED" ac_path_SED_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_SED_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_SED"; then as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 fi else ac_cv_path_SED=$SED fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 $as_echo "$ac_cv_path_SED" >&6; } SED="$ac_cv_path_SED" rm -f conftest.sed test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if ${ac_cv_path_GREP+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_GREP" || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if ${ac_cv_path_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_EGREP" || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 $as_echo_n "checking for fgrep... " >&6; } if ${ac_cv_path_FGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 then ac_cv_path_FGREP="$GREP -F" else if test -z "$FGREP"; then ac_path_FGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in fgrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_FGREP" || continue # Check for GNU ac_path_FGREP and select it if it is found. # Check for GNU $ac_path_FGREP case `"$ac_path_FGREP" --version 2>&1` in *GNU*) ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'FGREP' >> "conftest.nl" "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_FGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_FGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_FGREP"; then as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_FGREP=$FGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 $as_echo "$ac_cv_path_FGREP" >&6; } FGREP="$ac_cv_path_FGREP" test -z "$GREP" && GREP=grep # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi if ${lt_cv_path_LD+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } if ${lt_cv_prog_gnu_ld+:} false; then : $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } if ${lt_cv_path_NM+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done : ${lt_cv_path_NM=no} fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : # Let the user override the test. else if test -n "$ac_tool_prefix"; then for ac_prog in dumpbin "link -dump" do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DUMPBIN+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DUMPBIN"; then ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DUMPBIN=$ac_cv_prog_DUMPBIN if test -n "$DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 $as_echo "$DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$DUMPBIN" && break done fi if test -z "$DUMPBIN"; then ac_ct_DUMPBIN=$DUMPBIN for ac_prog in dumpbin "link -dump" do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DUMPBIN"; then ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN if test -n "$ac_ct_DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 $as_echo "$ac_ct_DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_DUMPBIN" && break done if test "x$ac_ct_DUMPBIN" = x; then DUMPBIN=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DUMPBIN=$ac_ct_DUMPBIN fi fi case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in *COFF*) DUMPBIN="$DUMPBIN -symbols" ;; *) DUMPBIN=: ;; esac fi if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" fi fi test -z "$NM" && NM=nm { $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 $as_echo_n "checking the name lister ($NM) interface... " >&6; } if ${lt_cv_nm_interface+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&5 (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&5 (eval echo "\"\$as_me:$LINENO: output\"" >&5) cat conftest.out >&5 if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 $as_echo "$lt_cv_nm_interface" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 $as_echo_n "checking whether ln -s works... " >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 $as_echo "no, using $LN_S" >&6; } fi # find the maximum length of command line arguments { $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 $as_echo_n "checking the maximum length of command line arguments... " >&6; } if ${lt_cv_sys_max_cmd_len+:} false; then : $as_echo_n "(cached) " >&6 else i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; mint*) # On MiNT this can take a long time and run out of memory. lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; os2*) # The test takes a long time on OS/2. lt_cv_sys_max_cmd_len=8192 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len" && \ test undefined != "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8 ; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac fi if test -n $lt_cv_sys_max_cmd_len ; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 $as_echo "$lt_cv_sys_max_cmd_len" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 $as_echo "none" >&6; } fi max_cmd_len=$lt_cv_sys_max_cmd_len : ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ = c,a/b,b/c, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 $as_echo "$xsi_shell" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 $as_echo_n "checking whether the shell understands \"+=\"... " >&6; } lt_shell_append=no ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 $as_echo "$lt_shell_append" >&6; } if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 $as_echo_n "checking how to convert $build file names to $host format... " >&6; } if ${lt_cv_to_host_file_cmd+:} false; then : $as_echo_n "(cached) " >&6 else case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ;; esac ;; *-*-cygwin* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_noop ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ;; esac ;; * ) # unhandled hosts (and "normal" native builds) lt_cv_to_host_file_cmd=func_convert_file_noop ;; esac fi to_host_file_cmd=$lt_cv_to_host_file_cmd { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 $as_echo "$lt_cv_to_host_file_cmd" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 $as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } if ${lt_cv_to_tool_file_cmd+:} false; then : $as_echo_n "(cached) " >&6 else #assume ordinary cross tools, or native build. lt_cv_to_tool_file_cmd=func_convert_file_noop case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ;; esac ;; esac fi to_tool_file_cmd=$lt_cv_to_tool_file_cmd { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 $as_echo "$lt_cv_to_tool_file_cmd" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 $as_echo_n "checking for $LD option to reload object files... " >&6; } if ${lt_cv_ld_reload_flag+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_reload_flag='-r' fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 $as_echo "$lt_cv_ld_reload_flag" >&6; } reload_flag=$lt_cv_ld_reload_flag case $reload_flag in "" | " "*) ;; *) reload_flag=" $reload_flag" ;; esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in cygwin* | mingw* | pw32* | cegcc*) if test "$GCC" != yes; then reload_cmds=false fi ;; darwin*) if test "$GCC" = yes; then reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' else reload_cmds='$LD$reload_flag -o $output$reload_objs' fi ;; esac if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OBJDUMP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OBJDUMP"; then ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 $as_echo "$OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OBJDUMP"; then ac_ct_OBJDUMP=$OBJDUMP # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OBJDUMP"; then ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OBJDUMP="objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 $as_echo "$ac_ct_OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OBJDUMP" = x; then OBJDUMP="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OBJDUMP=$ac_ct_OBJDUMP fi else OBJDUMP="$ac_cv_prog_OBJDUMP" fi test -z "$OBJDUMP" && OBJDUMP=objdump { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 $as_echo_n "checking how to recognize dependent libraries... " >&6; } if ${lt_cv_deplibs_check_method+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given extended regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix[4-9]*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi[45]*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin*) # func_win32_libid is a shell function defined in ltmain.sh lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' ;; mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else # Keep this pattern in sync with the one in func_win32_libid. lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc*) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; haiku*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[3-9]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 $as_echo "$lt_cv_deplibs_check_method" >&6; } file_magic_glob= want_nocaseglob=no if test "$build" = "$host"; then case $host_os in mingw* | pw32*) if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then want_nocaseglob=yes else file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` fi ;; esac fi file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ac_tool_prefix}dlltool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DLLTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DLLTOOL"; then ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DLLTOOL=$ac_cv_prog_DLLTOOL if test -n "$DLLTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 $as_echo "$DLLTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DLLTOOL"; then ac_ct_DLLTOOL=$DLLTOOL # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DLLTOOL"; then ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DLLTOOL="dlltool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL if test -n "$ac_ct_DLLTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 $as_echo "$ac_ct_DLLTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DLLTOOL" = x; then DLLTOOL="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DLLTOOL=$ac_ct_DLLTOOL fi else DLLTOOL="$ac_cv_prog_DLLTOOL" fi test -z "$DLLTOOL" && DLLTOOL=dlltool { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 $as_echo_n "checking how to associate runtime and link libraries... " >&6; } if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_sharedlib_from_linklib_cmd='unknown' case $host_os in cygwin* | mingw* | pw32* | cegcc*) # two different shell functions defined in ltmain.sh # decide which to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ;; *) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ;; esac ;; *) # fallback: assume linklib IS sharedlib lt_cv_sharedlib_from_linklib_cmd="$ECHO" ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 $as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO if test -n "$ac_tool_prefix"; then for ac_prog in ar do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_AR+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AR"; then ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AR="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 $as_echo "$AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AR" && break done fi if test -z "$AR"; then ac_ct_AR=$AR for ac_prog in ar do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_AR+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_AR"; then ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_AR="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 $as_echo "$ac_ct_AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_AR" && break done if test "x$ac_ct_AR" = x; then AR="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac AR=$ac_ct_AR fi fi : ${AR=ar} : ${AR_FLAGS=cru} { $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 $as_echo_n "checking for archiver @FILE support... " >&6; } if ${lt_cv_ar_at_file+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ar_at_file=no cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : echo conftest.$ac_objext > conftest.lst lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 (eval $lt_ar_try) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if test "$ac_status" -eq 0; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 (eval $lt_ar_try) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if test "$ac_status" -ne 0; then lt_cv_ar_at_file=@ fi fi rm -f conftest.* libconftest.a fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 $as_echo "$lt_cv_ar_at_file" >&6; } if test "x$lt_cv_ar_at_file" = xno; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi test -z "$STRIP" && STRIP=: if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 $as_echo "$RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_RANLIB="ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 $as_echo "$ac_ct_RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_RANLIB" = x; then RANLIB=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac RANLIB=$ac_ct_RANLIB fi else RANLIB="$ac_cv_prog_RANLIB" fi test -z "$RANLIB" && RANLIB=: # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" fi case $host_os in darwin*) lock_old_archive_extraction=yes ;; *) lock_old_archive_extraction=no ;; esac # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Check for command to grab the raw symbol name followed by C symbol from nm. { $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } if ${lt_cv_sys_global_symbol_pipe+:} false; then : $as_echo_n "(cached) " >&6 else # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[BCDEGRST]' # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[BCDT]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[ABCDGISTW]' ;; hpux*) if test "$host_cpu" = ia64; then symcode='[ABCDEGRST]' fi ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; osf*) symcode='[BCDEGQRST]' ;; solaris*) symcode='[BDRT]' ;; sco3.2v5*) symcode='[DT]' ;; sysv4.2uw2*) symcode='[DT]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[ABDT]' ;; sysv4) symcode='[DFNSTU]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[ABCDGIRSTW]' ;; esac # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function # and D for any global variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK '"\ " {last_section=section; section=\$ 3};"\ " /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ " {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ " s[1]~/^[@?]/{print s[1], s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then # Now try to grab the symbols. nlist=conftest.nm if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ LT_DLSYM_CONST struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&5 fi else echo "cannot find nm_test_var in $nlist" >&5 fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 fi else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done fi if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 $as_echo "failed" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 $as_echo "ok" >&6; } fi # Response file support. if test "$lt_cv_nm_interface" = "MS dumpbin"; then nm_file_list_spec='@' elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then nm_file_list_spec='@' fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 $as_echo_n "checking for sysroot... " >&6; } # Check whether --with-sysroot was given. if test "${with_sysroot+set}" = set; then : withval=$with_sysroot; else with_sysroot=no fi lt_sysroot= case ${with_sysroot} in #( yes) if test "$GCC" = yes; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( /*) lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` ;; #( no|'') ;; #( *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 $as_echo "${with_sysroot}" >&6; } as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 $as_echo "${lt_sysroot:-no}" >&6; } # Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then : enableval=$enable_libtool_lock; fi test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '#line '$LINENO' "configure"' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) case `/usr/bin/file conftest.o` in *x86-64*) LD="${LD-ld} -m elf32_x86_64" ;; *) LD="${LD-ld} -m elf_i386" ;; esac ;; powerpc64le-*) LD="${LD-ld} -m elf32lppclinux" ;; powerpc64-*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; powerpcle-*) LD="${LD-ld} -m elf64lppc" ;; powerpc-*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 $as_echo_n "checking whether the C compiler needs -belf... " >&6; } if ${lt_cv_cc_needs_belf+:} false; then : $as_echo_n "(cached) " >&6 else ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_cc_needs_belf=yes else lt_cv_cc_needs_belf=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 $as_echo "$lt_cv_cc_needs_belf" >&6; } if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; *-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) case $host in i?86-*-solaris*) LD="${LD-ld} -m elf_x86_64" ;; sparc*-*-solaris*) LD="${LD-ld} -m elf64_sparc" ;; esac # GNU ld 2.21 introduced _sol2 emulations. Use them if available. if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then LD="${LD-ld}_sol2" fi ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks="$enable_libtool_lock" if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. set dummy ${ac_tool_prefix}mt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$MANIFEST_TOOL"; then ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL if test -n "$MANIFEST_TOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 $as_echo "$MANIFEST_TOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_MANIFEST_TOOL"; then ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL # Extract the first word of "mt", so it can be a program name with args. set dummy mt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_MANIFEST_TOOL"; then ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL if test -n "$ac_ct_MANIFEST_TOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 $as_echo "$ac_ct_MANIFEST_TOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_MANIFEST_TOOL" = x; then MANIFEST_TOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL fi else MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" fi test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 $as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } if ${lt_cv_path_mainfest_tool+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_path_mainfest_tool=no echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out cat conftest.err >&5 if $GREP 'Manifest Tool' conftest.out > /dev/null; then lt_cv_path_mainfest_tool=yes fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 $as_echo "$lt_cv_path_mainfest_tool" >&6; } if test "x$lt_cv_path_mainfest_tool" != xyes; then MANIFEST_TOOL=: fi case $host_os in rhapsody* | darwin*) if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DSYMUTIL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DSYMUTIL"; then ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DSYMUTIL=$ac_cv_prog_DSYMUTIL if test -n "$DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 $as_echo "$DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DSYMUTIL"; then ac_ct_DSYMUTIL=$DSYMUTIL # Extract the first word of "dsymutil", so it can be a program name with args. set dummy dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DSYMUTIL"; then ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL if test -n "$ac_ct_DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 $as_echo "$ac_ct_DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DSYMUTIL" = x; then DSYMUTIL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DSYMUTIL=$ac_ct_DSYMUTIL fi else DSYMUTIL="$ac_cv_prog_DSYMUTIL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. set dummy ${ac_tool_prefix}nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_NMEDIT+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$NMEDIT"; then ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi NMEDIT=$ac_cv_prog_NMEDIT if test -n "$NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 $as_echo "$NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_NMEDIT"; then ac_ct_NMEDIT=$NMEDIT # Extract the first word of "nmedit", so it can be a program name with args. set dummy nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_NMEDIT"; then ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_NMEDIT="nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT if test -n "$ac_ct_NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 $as_echo "$ac_ct_NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_NMEDIT" = x; then NMEDIT=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac NMEDIT=$ac_ct_NMEDIT fi else NMEDIT="$ac_cv_prog_NMEDIT" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. set dummy ${ac_tool_prefix}lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_LIPO+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$LIPO"; then ac_cv_prog_LIPO="$LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_LIPO="${ac_tool_prefix}lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi LIPO=$ac_cv_prog_LIPO if test -n "$LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 $as_echo "$LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_LIPO"; then ac_ct_LIPO=$LIPO # Extract the first word of "lipo", so it can be a program name with args. set dummy lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_LIPO+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_LIPO"; then ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_LIPO="lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO if test -n "$ac_ct_LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 $as_echo "$ac_ct_LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_LIPO" = x; then LIPO=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac LIPO=$ac_ct_LIPO fi else LIPO="$ac_cv_prog_LIPO" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. set dummy ${ac_tool_prefix}otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL"; then ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OTOOL="${ac_tool_prefix}otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL=$ac_cv_prog_OTOOL if test -n "$OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 $as_echo "$OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL"; then ac_ct_OTOOL=$OTOOL # Extract the first word of "otool", so it can be a program name with args. set dummy otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL"; then ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OTOOL="otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL if test -n "$ac_ct_OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 $as_echo "$ac_ct_OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL" = x; then OTOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL=$ac_ct_OTOOL fi else OTOOL="$ac_cv_prog_OTOOL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. set dummy ${ac_tool_prefix}otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OTOOL64+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL64"; then ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL64=$ac_cv_prog_OTOOL64 if test -n "$OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 $as_echo "$OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL64"; then ac_ct_OTOOL64=$OTOOL64 # Extract the first word of "otool64", so it can be a program name with args. set dummy otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL64"; then ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OTOOL64="otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 if test -n "$ac_ct_OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 $as_echo "$ac_ct_OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL64" = x; then OTOOL64=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL64=$ac_ct_OTOOL64 fi else OTOOL64="$ac_cv_prog_OTOOL64" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 $as_echo_n "checking for -single_module linker flag... " >&6; } if ${lt_cv_apple_cc_single_mod+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&5 $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? # If there is a non-empty error log, and "single_module" # appears in it, assume the flag caused a linker warning if test -s conftest.err && $GREP single_module conftest.err; then cat conftest.err >&5 # Otherwise, if the output was created with a 0 exit code from # the compiler, it worked. elif test -f libconftest.dylib && test $_lt_result -eq 0; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&5 fi rm -rf libconftest.dylib* rm -f conftest.* fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 $as_echo "$lt_cv_apple_cc_single_mod" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } if ${lt_cv_ld_exported_symbols_list+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_ld_exported_symbols_list=yes else lt_cv_ld_exported_symbols_list=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 $as_echo_n "checking for -force_load linker flag... " >&6; } if ${lt_cv_ld_force_load+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_force_load=no cat > conftest.c << _LT_EOF int forced_loaded() { return 2;} _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 echo "$AR cru libconftest.a conftest.o" >&5 $AR cru libconftest.a conftest.o 2>&5 echo "$RANLIB libconftest.a" >&5 $RANLIB libconftest.a 2>&5 cat > conftest.c << _LT_EOF int main() { return 0;} _LT_EOF echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err _lt_result=$? if test -s conftest.err && $GREP force_load conftest.err; then cat conftest.err >&5 elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then lt_cv_ld_force_load=yes else cat conftest.err >&5 fi rm -f conftest.err libconftest.a conftest conftest.c rm -rf conftest.dSYM fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 $as_echo "$lt_cv_ld_force_load" >&6; } case $host_os in rhapsody* | darwin1.[012]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[91]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[012]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if ${ac_cv_prog_CPP+:} false; then : $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details" "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if ${ac_cv_header_stdc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in dlfcn.h do : ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default " if test "x$ac_cv_header_dlfcn_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_DLFCN_H 1 _ACEOF fi done # Set options # Check whether --enable-static was given. if test "${enable_static+set}" = set; then : enableval=$enable_static; p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac else enable_static=no fi enable_dlopen=no enable_win32_dll=no # Check whether --enable-shared was given. if test "${enable_shared+set}" = set; then : enableval=$enable_shared; p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac else enable_shared=yes fi # Check whether --with-pic was given. if test "${with_pic+set}" = set; then : withval=$with_pic; lt_p=${PACKAGE-default} case $withval in yes|no) pic_mode=$withval ;; *) pic_mode=default # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for lt_pkg in $withval; do IFS="$lt_save_ifs" if test "X$lt_pkg" = "X$lt_p"; then pic_mode=yes fi done IFS="$lt_save_ifs" ;; esac else pic_mode=default fi test -z "$pic_mode" && pic_mode=default # Check whether --enable-fast-install was given. if test "${enable_fast_install+set}" = set; then : enableval=$enable_fast_install; p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac else enable_fast_install=yes fi # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ltmain" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' test -z "$LN_S" && LN_S="ln -s" if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 $as_echo_n "checking for objdir... " >&6; } if ${lt_cv_objdir+:} false; then : $as_echo_n "(cached) " >&6 else rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 $as_echo "$lt_cv_objdir" >&6; } objdir=$lt_cv_objdir cat >>confdefs.h <<_ACEOF #define LT_OBJDIR "$lt_cv_objdir/" _ACEOF case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld="$lt_cv_prog_gnu_ld" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } if ${lt_cv_path_MAGIC_CMD+:} false; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/${ac_tool_prefix}file; then lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 $as_echo_n "checking for file... " >&6; } if ${lt_cv_path_MAGIC_CMD+:} false; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/file; then lt_cv_path_MAGIC_CMD="$ac_dir/file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi else MAGIC_CMD=: fi fi fi ;; esac # Use C for the default configuration in the libtool script lt_save_CC="$CC" ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o objext=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then lt_prog_compiler_no_builtin_flag= if test "$GCC" = yes; then case $cc_basename in nvcc*) lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; *) lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-fno-rtti -fno-exceptions" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" else : fi fi lt_prog_compiler_wl= lt_prog_compiler_pic= lt_prog_compiler_static= if test "$GCC" = yes; then lt_prog_compiler_wl='-Wl,' lt_prog_compiler_static='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support lt_prog_compiler_pic='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic='-fno-common' ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. lt_prog_compiler_static= ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) lt_prog_compiler_pic='-fPIC' ;; esac ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. lt_prog_compiler_can_build_shared=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic=-Kconform_pic fi ;; *) lt_prog_compiler_pic='-fPIC' ;; esac case $cc_basename in nvcc*) # Cuda Compiler Driver 2.2 lt_prog_compiler_wl='-Xlinker ' if test -n "$lt_prog_compiler_pic"; then lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" fi ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) lt_prog_compiler_wl='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' else lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' fi ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic='-DDLL_EXPORT' ;; hpux9* | hpux10* | hpux11*) lt_prog_compiler_wl='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? lt_prog_compiler_static='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) lt_prog_compiler_wl='-Wl,' # PIC (with -KPIC) is the default. lt_prog_compiler_static='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; # Lahey Fortran 8.1. lf95*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='--shared' lt_prog_compiler_static='--static' ;; nagfor*) # NAG Fortran compiler lt_prog_compiler_wl='-Wl,-Wl,,' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; ccc*) lt_prog_compiler_wl='-Wl,' # All Alpha code is PIC. lt_prog_compiler_static='-non_shared' ;; xl* | bgxl* | bgf* | mpixl*) # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-qpic' lt_prog_compiler_static='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) # Sun Fortran 8.3 passes all unrecognized flags to the linker lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='' ;; *Sun\ F* | *Sun*Fortran*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Qoption ld ' ;; *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Wl,' ;; *Intel*\ [CF]*Compiler*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; *Portland\ Group*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; esac ;; esac ;; newsos6) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; osf3* | osf4* | osf5*) lt_prog_compiler_wl='-Wl,' # All OSF/1 code is PIC. lt_prog_compiler_static='-non_shared' ;; rdos*) lt_prog_compiler_static='-non_shared' ;; solaris*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' case $cc_basename in f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) lt_prog_compiler_wl='-Qoption ld ';; *) lt_prog_compiler_wl='-Wl,';; esac ;; sunos4*) lt_prog_compiler_wl='-Qoption ld ' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then lt_prog_compiler_pic='-Kconform_pic' lt_prog_compiler_static='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; unicos*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_can_build_shared=no ;; uts4*) lt_prog_compiler_pic='-pic' lt_prog_compiler_static='-Bstatic' ;; *) lt_prog_compiler_can_build_shared=no ;; esac fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= ;; *) lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 $as_echo_n "checking for $compiler option to produce PIC... " >&6; } if ${lt_cv_prog_compiler_pic+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic=$lt_prog_compiler_pic fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 $as_echo "$lt_cv_prog_compiler_pic" >&6; } lt_prog_compiler_pic=$lt_cv_prog_compiler_pic # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } if ${lt_cv_prog_compiler_pic_works+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic -DPIC" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } if test x"$lt_cv_prog_compiler_pic_works" = xyes; then case $lt_prog_compiler_pic in "" | " "*) ;; *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; esac else lt_prog_compiler_pic= lt_prog_compiler_can_build_shared=no fi fi # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } if ${lt_cv_prog_compiler_static_works+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works=yes fi else lt_cv_prog_compiler_static_works=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 $as_echo "$lt_cv_prog_compiler_static_works" >&6; } if test x"$lt_cv_prog_compiler_static_works" = xyes; then : else lt_prog_compiler_static= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } runpath_var= allow_undefined_flag= always_export_symbols=no archive_cmds= archive_expsym_cmds= compiler_needs_object=no enable_shared_with_static_runtimes=no export_dynamic_flag_spec= export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' hardcode_automatic=no hardcode_direct=no hardcode_direct_absolute=no hardcode_libdir_flag_spec= hardcode_libdir_separator= hardcode_minus_L=no hardcode_shlibpath_var=unsupported inherit_rpath=no link_all_deplibs=unknown module_cmds= module_expsym_cmds= old_archive_from_new_cmds= old_archive_from_expsyms_cmds= thread_safe_flag_spec= whole_archive_flag_spec= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; linux* | k*bsd*-gnu | gnu*) link_all_deplibs=no ;; esac ld_shlibs=yes # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility # with the native linker. However, as the warning in the GNU ld # block says, versions before 2.19.5* couldn't really create working # shared libraries, regardless of the interface used. case `$LD -v 2>&1` in *\ \(GNU\ Binutils\)\ 2.19.5*) ;; *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; *\ \(GNU\ Binutils\)\ [3-9]*) ;; *) lt_use_gnu_ld_interface=yes ;; esac ;; *) lt_use_gnu_ld_interface=yes ;; esac fi if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec= fi supports_anon_versioning=no case `$LD -v 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.19, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to install binutils *** 2.20 or above, or modify your PATH so that a non-GNU linker is found. *** You will then need to restart the configuration process. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' export_dynamic_flag_spec='${wl}--export-all-symbols' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs=no fi ;; haiku*) archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' link_all_deplibs=yes ;; interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 whole_archive_flag_spec= tmp_sharedflag='--shared' ;; xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi case $cc_basename in xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else ld_shlibs=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac ;; sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct=yes hardcode_shlibpath_var=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = no; then runpath_var= hardcode_libdir_flag_spec= export_dynamic_flag_spec= whole_archive_flag_spec= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag=unsupported always_export_symbols=yes archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global # defined symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds='' hardcode_direct=yes hardcode_direct_absolute=yes hardcode_libdir_separator=':' link_all_deplibs=yes file_list_spec='${wl}-f,' if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi link_all_deplibs=no else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi export_dynamic_flag_spec='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an # empty executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath_ fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath_ fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag=' ${wl}-bernotok' allow_undefined_flag=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec='$convenience' fi archive_cmds_need_lc=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; bsdi[45]*) export_dynamic_flag_spec=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in cl*) # Native MSVC hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported always_export_symbols=yes file_list_spec='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, )='true' enable_shared_with_static_runtimes=yes exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' # Don't use ranlib old_postinstall_cmds='chmod 644 $oldlib' postlink_cmds='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # Assume MSVC wrapper hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_from_new_cmds='true' # FIXME: Should let the user specify the lib program. old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' enable_shared_with_static_runtimes=yes ;; esac ;; darwin* | rhapsody*) archive_cmds_need_lc=no hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported if test "$lt_cv_ld_force_load" = "yes"; then whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else whole_archive_flag_spec='' fi link_all_deplibs=yes allow_undefined_flag="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=func_echo_all archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" else ld_shlibs=no fi ;; dgux*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2.*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; hpux9*) if test "$GCC" = yes; then archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes export_dynamic_flag_spec='${wl}-E' ;; hpux10*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes fi ;; hpux11*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) # Older versions of the 11.00 compiler do not understand -b yet # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 $as_echo_n "checking if $CC understands -b... " >&6; } if ${lt_cv_prog_compiler__b+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler__b=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -b" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler__b=yes fi else lt_cv_prog_compiler__b=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 $as_echo "$lt_cv_prog_compiler__b" >&6; } if test x"$lt_cv_prog_compiler__b" = xyes; then archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi ;; esac fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: case $host_cpu in hppa*64*|ia64*) hardcode_direct=no hardcode_shlibpath_var=no ;; *) hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. # This should be the same for all languages, so no per-tag cache variable. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 $as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } if ${lt_cv_irix_exported_symbol+:} false; then : $as_echo_n "(cached) " >&6 else save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int foo (void) { return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_irix_exported_symbol=yes else lt_cv_irix_exported_symbol=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 $as_echo "$lt_cv_irix_exported_symbol" >&6; } if test "$lt_cv_irix_exported_symbol" = yes; then archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' fi else archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: inherit_rpath=yes link_all_deplibs=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; *nto* | *qnx*) ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes hardcode_shlibpath_var=no hardcode_direct_absolute=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' else case $host_os in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-R$libdir' ;; *) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi else ld_shlibs=no fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi archive_cmds_need_lc='no' hardcode_libdir_separator=: ;; solaris*) no_undefined_flag=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='${wl}' archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else whole_archive_flag_spec='-z allextract$convenience -z defaultextract' fi ;; esac link_all_deplibs=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; sysv4) case $host_vendor in sni) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' reload_cmds='$CC -r -o $output$reload_objs' hardcode_direct=no ;; motorola) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; sysv4.3*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no export_dynamic_flag_spec='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag='${wl}-z,text' archive_cmds_need_lc=no hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag='${wl}-z,text' allow_undefined_flag='${wl}-z,nodefs' archive_cmds_need_lc=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-R,$libdir' hardcode_libdir_separator=':' link_all_deplibs=yes export_dynamic_flag_spec='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; *) ld_shlibs=no ;; esac if test x$host_vendor = xsni; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) export_dynamic_flag_spec='${wl}-Blargedynsym' ;; esac fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 $as_echo "$ld_shlibs" >&6; } test "$ld_shlibs" = no && can_build_shared=no with_gnu_ld=$with_gnu_ld # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc" in x|xyes) # Assume -lc should be added archive_cmds_need_lc=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } if ${lt_cv_archive_cmds_need_lc+:} false; then : $as_echo_n "(cached) " >&6 else $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl pic_flag=$lt_prog_compiler_pic compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag allow_undefined_flag= if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then lt_cv_archive_cmds_need_lc=no else lt_cv_archive_cmds_need_lc=yes fi allow_undefined_flag=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 $as_echo "$lt_cv_archive_cmds_need_lc" >&6; } archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc ;; esac fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac case $host_os in mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; *) lt_sed_strip_eq="s,=/,/,g" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` ;; *) lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` ;; esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[lt_foo]++; } if (lt_freq[lt_foo] == 1) { print lt_foo; } }'` # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's,/\([A-Za-z]:\),\1,g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' library_names_spec='${libname}.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec="$LIB" if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[23].*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; haiku*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=yes sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[3-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH if ${lt_cv_shlibpath_overrides_runpath+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : lt_cv_shlibpath_overrides_runpath=yes fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS libdir=$save_libdir fi shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action= if test -n "$hardcode_libdir_flag_spec" || test -n "$runpath_var" || test "X$hardcode_automatic" = "Xyes" ; then # We can hardcode non-existent directories. if test "$hardcode_direct" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && test "$hardcode_minus_L" != no; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action=unsupported fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 $as_echo "$hardcode_action" >&6; } if test "$hardcode_action" = relink || test "$inherit_rpath" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes fi ;; *) ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" if test "x$ac_cv_func_shl_load" = xyes; then : lt_cv_dlopen="shl_load" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 $as_echo_n "checking for shl_load in -ldld... " >&6; } if ${ac_cv_lib_dld_shl_load+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char shl_load (); int main () { return shl_load (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_shl_load=yes else ac_cv_lib_dld_shl_load=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 $as_echo "$ac_cv_lib_dld_shl_load" >&6; } if test "x$ac_cv_lib_dld_shl_load" = xyes; then : lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" else ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" if test "x$ac_cv_func_dlopen" = xyes; then : lt_cv_dlopen="dlopen" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } if ${ac_cv_lib_svld_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_svld_dlopen=yes else ac_cv_lib_svld_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } if test "x$ac_cv_lib_svld_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } if ${ac_cv_lib_dld_dld_link+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dld_link (); int main () { return dld_link (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_dld_link=yes else ac_cv_lib_dld_dld_link=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } if test "x$ac_cv_lib_dld_dld_link" = xyes; then : lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" fi fi fi fi fi fi ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 $as_echo_n "checking whether a program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; esac else : # compilation failed lt_cv_dlopen_self=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 $as_echo "$lt_cv_dlopen_self" >&6; } if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self_static+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; esac else : # compilation failed lt_cv_dlopen_self_static=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 $as_echo "$lt_cv_dlopen_self_static" >&6; } fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi striplib= old_striplib= { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 $as_echo_n "checking whether stripping libraries is possible... " >&6; } if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi ;; *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } ;; esac fi # Report which library types will actually be built { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 $as_echo_n "checking if libtool supports shared libraries... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 $as_echo "$can_build_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 $as_echo_n "checking whether to build shared libraries... " >&6; } test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[4-9]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 $as_echo "$enable_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 $as_echo_n "checking whether to build static libraries... " >&6; } # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 $as_echo "$enable_static" >&6; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC="$lt_save_CC" ac_config_commands="$ac_config_commands libtool" # Only expand once: # Define these substitions here to keep all version information in one place. # For information on how to properly maintain the library version information, # refer to the libtool manual, section "Updating library version information": # http://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html PARLATYPE_SO_VERSION=1:4:0 # Parlatype is unstable, we don't use API version yet PARLATYPE_API_VERSION=1.0 # Checks for programs. ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 $as_echo_n "checking whether $CC understands -c and -o together... " >&6; } if ${am_cv_prog_cc_c_o+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done rm -f core conftest* unset am_i fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 $as_echo "$am_cv_prog_cc_c_o" >&6; } if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if ${am_cv_CC_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu if test -z "$CXX"; then if test -n "$CCC"; then CXX=$CCC else if test -n "$ac_tool_prefix"; then for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CXX+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CXX"; then ac_cv_prog_CXX="$CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CXX=$ac_cv_prog_CXX if test -n "$CXX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 $as_echo "$CXX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CXX" && break done fi if test -z "$CXX"; then ac_ct_CXX=$CXX for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CXX+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CXX"; then ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CXX="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CXX=$ac_cv_prog_ac_ct_CXX if test -n "$ac_ct_CXX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 $as_echo "$ac_ct_CXX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CXX" && break done if test "x$ac_ct_CXX" = x; then CXX="g++" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CXX=$ac_ct_CXX fi fi fi fi # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 $as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } if ${ac_cv_cxx_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_cxx_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 $as_echo "$ac_cv_cxx_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GXX=yes else GXX= fi ac_test_CXXFLAGS=${CXXFLAGS+set} ac_save_CXXFLAGS=$CXXFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 $as_echo_n "checking whether $CXX accepts -g... " >&6; } if ${ac_cv_prog_cxx_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_cxx_werror_flag=$ac_cxx_werror_flag ac_cxx_werror_flag=yes ac_cv_prog_cxx_g=no CXXFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : ac_cv_prog_cxx_g=yes else CXXFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : else ac_cxx_werror_flag=$ac_save_cxx_werror_flag CXXFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : ac_cv_prog_cxx_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cxx_werror_flag=$ac_save_cxx_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 $as_echo "$ac_cv_prog_cxx_g" >&6; } if test "$ac_test_CXXFLAGS" = set; then CXXFLAGS=$ac_save_CXXFLAGS elif test $ac_cv_prog_cxx_g = yes; then if test "$GXX" = yes; then CXXFLAGS="-g -O2" else CXXFLAGS="-g" fi else if test "$GXX" = yes; then CXXFLAGS="-O2" else CXXFLAGS= fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CXX" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if ${am_cv_CXX_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CXX_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CXX_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CXX_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5 $as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then am__fastdepCXX_TRUE= am__fastdepCXX_FALSE='#' else am__fastdepCXX_TRUE='#' am__fastdepCXX_FALSE= fi func_stripname_cnf () { case ${2} in .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; esac } # func_stripname_cnf if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 $as_echo_n "checking how to run the C++ preprocessor... " >&6; } if test -z "$CXXCPP"; then if ${ac_cv_prog_CXXCPP+:} false; then : $as_echo_n "(cached) " >&6 else # Double quotes because CXXCPP needs to be expanded for CXXCPP in "$CXX -E" "/lib/cpp" do ac_preproc_ok=false for ac_cxx_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_cxx_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_cxx_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CXXCPP=$CXXCPP fi CXXCPP=$ac_cv_prog_CXXCPP else ac_cv_prog_CXXCPP=$CXXCPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5 $as_echo "$CXXCPP" >&6; } ac_preproc_ok=false for ac_cxx_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_cxx_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_cxx_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check See \`config.log' for more details" "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu else _lt_caught_CXX_error=yes fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu archive_cmds_need_lc_CXX=no allow_undefined_flag_CXX= always_export_symbols_CXX=no archive_expsym_cmds_CXX= compiler_needs_object_CXX=no export_dynamic_flag_spec_CXX= hardcode_direct_CXX=no hardcode_direct_absolute_CXX=no hardcode_libdir_flag_spec_CXX= hardcode_libdir_separator_CXX= hardcode_minus_L_CXX=no hardcode_shlibpath_var_CXX=unsupported hardcode_automatic_CXX=no inherit_rpath_CXX=no module_cmds_CXX= module_expsym_cmds_CXX= link_all_deplibs_CXX=unknown old_archive_cmds_CXX=$old_archive_cmds reload_flag_CXX=$reload_flag reload_cmds_CXX=$reload_cmds no_undefined_flag_CXX= whole_archive_flag_spec_CXX= enable_shared_with_static_runtimes_CXX=no # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o objext_CXX=$objext # No sense in running all these tests if we already determined that # the CXX compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_caught_CXX_error" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} CFLAGS=$CXXFLAGS compiler=$CC compiler_CXX=$CC for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` if test -n "$compiler"; then # We don't want -fno-exception when compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' else lt_prog_compiler_no_builtin_flag_CXX= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi if ${lt_cv_path_LD+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } if ${lt_cv_prog_gnu_ld+:} false; then : $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | $GREP 'no-whole-archive' > /dev/null; then whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec_CXX= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } ld_shlibs_CXX=yes case $host_os in aix3*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds_CXX='' hardcode_direct_CXX=yes hardcode_direct_absolute_CXX=yes hardcode_libdir_separator_CXX=':' link_all_deplibs_CXX=yes file_list_spec_CXX='${wl}-f,' if test "$GXX" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct_CXX=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L_CXX=yes hardcode_libdir_flag_spec_CXX='-L$libdir' hardcode_libdir_separator_CXX= fi esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi export_dynamic_flag_spec_CXX='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to # export. always_export_symbols_CXX=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag_CXX='-berok' # Determine the default libpath from the value encoded in an empty # executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath__CXX+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath__CXX"; then lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath__CXX"; then lt_cv_aix_libpath__CXX="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath__CXX fi hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag_CXX="-z nodefs" archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath__CXX+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath__CXX"; then lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath__CXX"; then lt_cv_aix_libpath__CXX="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath__CXX fi hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag_CXX=' ${wl}-bernotok' allow_undefined_flag_CXX=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec_CXX='$convenience' fi archive_cmds_need_lc_CXX=yes # This is similar to how AIX traditionally builds its shared # libraries. archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then allow_undefined_flag_CXX=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs_CXX=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; cygwin* | mingw* | pw32* | cegcc*) case $GXX,$cc_basename in ,cl* | no,cl*) # Native MSVC # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec_CXX=' ' allow_undefined_flag_CXX=unsupported always_export_symbols_CXX=yes file_list_spec_CXX='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true' enable_shared_with_static_runtimes_CXX=yes # Don't use ranlib old_postinstall_cmds_CXX='chmod 644 $oldlib' postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ func_to_tool_file "$lt_outputfile"~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # g++ # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec_CXX='-L$libdir' export_dynamic_flag_spec_CXX='${wl}--export-all-symbols' allow_undefined_flag_CXX=unsupported always_export_symbols_CXX=no enable_shared_with_static_runtimes_CXX=yes if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs_CXX=no fi ;; esac ;; darwin* | rhapsody*) archive_cmds_need_lc_CXX=no hardcode_direct_CXX=no hardcode_automatic_CXX=yes hardcode_shlibpath_var_CXX=unsupported if test "$lt_cv_ld_force_load" = "yes"; then whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else whole_archive_flag_spec_CXX='' fi link_all_deplibs_CXX=yes allow_undefined_flag_CXX="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=func_echo_all archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" if test "$lt_cv_apple_cc_single_mod" != "yes"; then archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" fi else ld_shlibs_CXX=no fi ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; freebsd2.*) # C++ shared libraries reported to be fairly broken before # switch to ELF ld_shlibs_CXX=no ;; freebsd-elf*) archive_cmds_need_lc_CXX=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions ld_shlibs_CXX=yes ;; haiku*) archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' link_all_deplibs_CXX=yes ;; hpux9*) hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' hardcode_libdir_separator_CXX=: export_dynamic_flag_spec_CXX='${wl}-E' hardcode_direct_CXX=yes hardcode_minus_L_CXX=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aCC*) archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' hardcode_libdir_separator_CXX=: case $host_cpu in hppa*64*|ia64*) ;; *) export_dynamic_flag_spec_CXX='${wl}-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) hardcode_direct_CXX=no hardcode_shlibpath_var_CXX=no ;; *) hardcode_direct_CXX=yes hardcode_direct_absolute_CXX=yes hardcode_minus_L_CXX=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aCC*) case $host_cpu in hppa*64*) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then case $host_cpu in hppa*64*) archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; interix[3-9]*) hardcode_direct_CXX=no hardcode_shlibpath_var_CXX=no hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' fi fi link_all_deplibs_CXX=yes ;; esac hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: inherit_rpath_CXX=yes ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc* | ecpc* ) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; esac archive_cmds_need_lc_CXX=no hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in *pgCC\ [1-5].* | *pgcpp\ [1-5].*) prelink_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' old_archive_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ $RANLIB $oldlib' archive_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' archive_expsym_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; *) # Version 6 and above use weak symbols archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; esac hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec_CXX='-rpath $libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' ;; xl* | mpixl* | bgxl*) # IBM XL 8.0 on PPC, with GNU ld hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 no_undefined_flag_CXX=' -zdefs' archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' hardcode_libdir_flag_spec_CXX='-R$libdir' whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object_CXX=yes # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; m88k*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= hardcode_libdir_flag_spec_CXX='-R$libdir' hardcode_direct_CXX=yes hardcode_shlibpath_var_CXX=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; *nto* | *qnx*) ld_shlibs_CXX=yes ;; openbsd2*) # C++ shared libraries are fairly broken ld_shlibs_CXX=no ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct_CXX=yes hardcode_shlibpath_var_CXX=no hardcode_direct_absolute_CXX=yes archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' export_dynamic_flag_spec_CXX='${wl}-E' whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi output_verbose_link_cmd=func_echo_all else ld_shlibs_CXX=no fi ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' hardcode_libdir_separator_CXX=: # Archives containing C++ object files must be created using # the KAI C++ compiler. case $host in osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;; esac ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; cxx*) case $host in osf3*) allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ;; *) allow_undefined_flag_CXX=' -expect_unresolved \*' archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ $RM $lib.exp' hardcode_libdir_flag_spec_CXX='-rpath $libdir' ;; esac hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' case $host in osf3*) archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; *) archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; esac hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ archive_cmds_need_lc_CXX=yes no_undefined_flag_CXX=' -zdefs' archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' hardcode_libdir_flag_spec_CXX='-R$libdir' hardcode_shlibpath_var_CXX=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' ;; esac link_all_deplibs_CXX=yes output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then no_undefined_flag_CXX=' ${wl}-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' fi hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag_CXX='${wl}-z,text' archive_cmds_need_lc_CXX=no hardcode_shlibpath_var_CXX=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag_CXX='${wl}-z,text' allow_undefined_flag_CXX='${wl}-z,nodefs' archive_cmds_need_lc_CXX=no hardcode_shlibpath_var_CXX=no hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir' hardcode_libdir_separator_CXX=':' link_all_deplibs_CXX=yes export_dynamic_flag_spec_CXX='${wl}-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~ '"$old_archive_cmds_CXX" reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~ '"$reload_cmds_CXX" ;; *) archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 $as_echo "$ld_shlibs_CXX" >&6; } test "$ld_shlibs_CXX" = no && can_build_shared=no GCC_CXX="$GXX" LD_CXX="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... # Dependencies to place before and after the object being linked: predep_objects_CXX= postdep_objects_CXX= predeps_CXX= postdeps_CXX= compiler_lib_search_path_CXX= cat > conftest.$ac_ext <<_LT_EOF class Foo { public: Foo (void) { a = 0; } private: int a; }; _LT_EOF _lt_libdeps_save_CFLAGS=$CFLAGS case "$CC $CFLAGS " in #( *\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; *\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; *\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; esac if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then # Parse the compiler output and extract the necessary # objects, libraries and library flags. # Sentinel used to keep track of whether or not we are before # the conftest object file. pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do case ${prev}${p} in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. if test $p = "-L" || test $p = "-R"; then prev=$p continue fi # Expand the sysroot to ease extracting the directories later. if test -z "$prev"; then case $p in -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; esac fi case $p in =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; esac if test "$pre_test_object_deps_done" = no; then case ${prev} in -L | -R) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$compiler_lib_search_path_CXX"; then compiler_lib_search_path_CXX="${prev}${p}" else compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" fi ;; # The "-l" case would never come before the object being # linked, so don't bother handling this case. esac else if test -z "$postdeps_CXX"; then postdeps_CXX="${prev}${p}" else postdeps_CXX="${postdeps_CXX} ${prev}${p}" fi fi prev= ;; *.lto.$objext) ;; # Ignore GCC LTO objects *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then pre_test_object_deps_done=yes continue fi if test "$pre_test_object_deps_done" = no; then if test -z "$predep_objects_CXX"; then predep_objects_CXX="$p" else predep_objects_CXX="$predep_objects_CXX $p" fi else if test -z "$postdep_objects_CXX"; then postdep_objects_CXX="$p" else postdep_objects_CXX="$postdep_objects_CXX $p" fi fi ;; *) ;; # Ignore the rest. esac done # Clean up. rm -f a.out a.exe else echo "libtool.m4: error: problem compiling CXX test program" fi $RM -f confest.$objext CFLAGS=$_lt_libdeps_save_CFLAGS # PORTME: override above test on systems where it is broken case $host_os in interix[3-9]*) # Interix 3.5 installs completely hosed .la files for C++, so rather than # hack all around it, let's just trust "g++" to DTRT. predep_objects_CXX= postdep_objects_CXX= postdeps_CXX= ;; linux*) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac if test "$solaris_use_stlport4" != yes; then postdeps_CXX='-library=Cstd -library=Crun' fi ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac # Adding this requires a known-good setup of shared libraries for # Sun compiler versions before 5.6, else PIC objects from an old # archive will be linked into the output, leading to subtle bugs. if test "$solaris_use_stlport4" != yes; then postdeps_CXX='-library=Cstd -library=Crun' fi ;; esac ;; esac case " $postdeps_CXX " in *" -lc "*) archive_cmds_need_lc_CXX=no ;; esac compiler_lib_search_dirs_CXX= if test -n "${compiler_lib_search_path_CXX}"; then compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` fi lt_prog_compiler_wl_CXX= lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX= # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_CXX='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support lt_prog_compiler_pic_CXX='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic_CXX='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic_CXX='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all lt_prog_compiler_pic_CXX= ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. lt_prog_compiler_static_CXX= ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic_CXX=-Kconform_pic fi ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) ;; *) lt_prog_compiler_pic_CXX='-fPIC' ;; esac ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic_CXX='-fPIC -shared' ;; *) lt_prog_compiler_pic_CXX='-fPIC' ;; esac else case $host_os in aix[4-9]*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_CXX='-Bstatic' else lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic_CXX='-DDLL_EXPORT' ;; dgux*) case $cc_basename in ec++*) lt_prog_compiler_pic_CXX='-KPIC' ;; ghcx*) # Green Hills C++ Compiler lt_prog_compiler_pic_CXX='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then lt_prog_compiler_pic_CXX='+Z' fi ;; aCC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic_CXX='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # KAI C++ Compiler lt_prog_compiler_wl_CXX='--backend -Wl,' lt_prog_compiler_pic_CXX='-fPIC' ;; ecpc* ) # old Intel C++ for x86_64 which still supported -KPIC. lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-static' ;; icpc* ) # Intel C++, used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-fPIC' lt_prog_compiler_static_CXX='-static' ;; pgCC* | pgcpp*) # Portland Group C++ compiler lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-fpic' lt_prog_compiler_static_CXX='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX='-non_shared' ;; xlc* | xlC* | bgxl[cC]* | mpixl[cC]*) # IBM XL 8.0, 9.0 on PPC and BlueGene lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-qpic' lt_prog_compiler_static_CXX='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' lt_prog_compiler_wl_CXX='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) lt_prog_compiler_pic_CXX='-W c,exportall' ;; *) ;; esac ;; netbsd* | netbsdelf*-gnu) ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic_CXX='-fPIC -shared' ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) lt_prog_compiler_wl_CXX='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 lt_prog_compiler_pic_CXX='-pic' ;; cxx*) # Digital/Compaq C++ lt_prog_compiler_wl_CXX='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' lt_prog_compiler_wl_CXX='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler lt_prog_compiler_pic_CXX='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x lt_prog_compiler_pic_CXX='-pic' lt_prog_compiler_static_CXX='-Bstatic' ;; lcc*) # Lucid lt_prog_compiler_pic_CXX='-pic' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 lt_prog_compiler_pic_CXX='-KPIC' ;; *) ;; esac ;; vxworks*) ;; *) lt_prog_compiler_can_build_shared_CXX=no ;; esac fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_CXX= ;; *) lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 $as_echo_n "checking for $compiler option to produce PIC... " >&6; } if ${lt_cv_prog_compiler_pic_CXX+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5 $as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; } lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic_CXX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works_CXX=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works_CXX=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 $as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then case $lt_prog_compiler_pic_CXX in "" | " "*) ;; *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; esac else lt_prog_compiler_pic_CXX= lt_prog_compiler_can_build_shared_CXX=no fi fi # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } if ${lt_cv_prog_compiler_static_works_CXX+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works_CXX=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works_CXX=yes fi else lt_cv_prog_compiler_static_works_CXX=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5 $as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then : else lt_prog_compiler_static_CXX= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o_CXX=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_CXX=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 $as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o_CXX=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_CXX=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 $as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' case $host_os in aix[4-9]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global defined # symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) export_symbols_cmds_CXX="$ltdll_cmds" ;; cygwin* | mingw* | cegcc*) case $cc_basename in cl*) exclude_expsyms_CXX='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' ;; *) export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' ;; esac ;; linux* | k*bsd*-gnu | gnu*) link_all_deplibs_CXX=no ;; *) export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 $as_echo "$ld_shlibs_CXX" >&6; } test "$ld_shlibs_CXX" = no && can_build_shared=no with_gnu_ld_CXX=$with_gnu_ld # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc_CXX" in x|xyes) # Assume -lc should be added archive_cmds_need_lc_CXX=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds_CXX in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then : $as_echo_n "(cached) " >&6 else $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl_CXX pic_flag=$lt_prog_compiler_pic_CXX compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag_CXX allow_undefined_flag_CXX= if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then lt_cv_archive_cmds_need_lc_CXX=no else lt_cv_archive_cmds_need_lc_CXX=yes fi allow_undefined_flag_CXX=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5 $as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; } archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX ;; esac fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' library_names_spec='${libname}.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec="$LIB" if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[23].*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; haiku*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=yes sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[3-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH if ${lt_cv_shlibpath_overrides_runpath+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\"" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_link "$LINENO"; then : if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : lt_cv_shlibpath_overrides_runpath=yes fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS libdir=$save_libdir fi shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action_CXX= if test -n "$hardcode_libdir_flag_spec_CXX" || test -n "$runpath_var_CXX" || test "X$hardcode_automatic_CXX" = "Xyes" ; then # We can hardcode non-existent directories. if test "$hardcode_direct_CXX" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no && test "$hardcode_minus_L_CXX" != no; then # Linking always hardcodes the temporary library directory. hardcode_action_CXX=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action_CXX=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action_CXX=unsupported fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5 $as_echo "$hardcode_action_CXX" >&6; } if test "$hardcode_action_CXX" = relink || test "$inherit_rpath_CXX" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi fi # test -n "$compiler" CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld fi # test "$_lt_caught_CXX_error" != yes ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Checks for libraries. # Checks for header files. for ac_header in string.h do : ac_fn_c_check_header_mongrel "$LINENO" "string.h" "ac_cv_header_string_h" "$ac_includes_default" if test "x$ac_cv_header_string_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_STRING_H 1 _ACEOF fi done # Checks for typedefs, structures, and compiler characteristics. ac_fn_c_check_type "$LINENO" "ssize_t" "ac_cv_type_ssize_t" "$ac_includes_default" if test "x$ac_cv_type_ssize_t" = xyes; then : else cat >>confdefs.h <<_ACEOF #define ssize_t int _ACEOF fi # Checks for library functions. for ac_func in atexit do : ac_fn_c_check_func "$LINENO" "atexit" "ac_cv_func_atexit" if test "x$ac_cv_func_atexit" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_ATEXIT 1 _ACEOF fi done # Check whether --enable-schemas-compile was given. if test "${enable_schemas_compile+set}" = set; then : enableval=$enable_schemas_compile; case ${enableval} in yes) GSETTINGS_DISABLE_SCHEMAS_COMPILE="" ;; no) GSETTINGS_DISABLE_SCHEMAS_COMPILE="1" ;; *) as_fn_error $? "bad value ${enableval} for --enable-schemas-compile" "$LINENO" 5 ;; esac fi if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_PKG_CONFIG+:} false; then : $as_echo_n "(cached) " >&6 else case $PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi PKG_CONFIG=$ac_cv_path_PKG_CONFIG if test -n "$PKG_CONFIG"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 $as_echo "$PKG_CONFIG" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_PKG_CONFIG"; then ac_pt_PKG_CONFIG=$PKG_CONFIG # Extract the first word of "pkg-config", so it can be a program name with args. set dummy pkg-config; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : $as_echo_n "(cached) " >&6 else case $ac_pt_PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG if test -n "$ac_pt_PKG_CONFIG"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 $as_echo "$ac_pt_PKG_CONFIG" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_PKG_CONFIG" = x; then PKG_CONFIG="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac PKG_CONFIG=$ac_pt_PKG_CONFIG fi else PKG_CONFIG="$ac_cv_path_PKG_CONFIG" fi fi if test -n "$PKG_CONFIG"; then _pkg_min_version=0.16 { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 $as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } PKG_CONFIG="" fi fi gsettingsschemadir=${datadir}/glib-2.0/schemas if test x$cross_compiling != xyes; then GLIB_COMPILE_SCHEMAS=`$PKG_CONFIG --variable glib_compile_schemas gio-2.0` else # Extract the first word of "glib-compile-schemas", so it can be a program name with args. set dummy glib-compile-schemas; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_GLIB_COMPILE_SCHEMAS+:} false; then : $as_echo_n "(cached) " >&6 else case $GLIB_COMPILE_SCHEMAS in [\\/]* | ?:[\\/]*) ac_cv_path_GLIB_COMPILE_SCHEMAS="$GLIB_COMPILE_SCHEMAS" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_GLIB_COMPILE_SCHEMAS="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi GLIB_COMPILE_SCHEMAS=$ac_cv_path_GLIB_COMPILE_SCHEMAS if test -n "$GLIB_COMPILE_SCHEMAS"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLIB_COMPILE_SCHEMAS" >&5 $as_echo "$GLIB_COMPILE_SCHEMAS" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test "x$GLIB_COMPILE_SCHEMAS" = "x"; then as_fn_error $? "glib-compile-schemas not found." "$LINENO" 5 else : fi GSETTINGS_RULES=' .PHONY : uninstall-gsettings-schemas install-gsettings-schemas clean-gsettings-schemas mostlyclean-am: clean-gsettings-schemas gsettings__enum_file = $(addsuffix .enums.xml,$(gsettings_ENUM_NAMESPACE)) %.gschema.valid: %.gschema.xml $(gsettings__enum_file) $(AM_V_GEN) $(GLIB_COMPILE_SCHEMAS) --strict --dry-run $(addprefix --schema-file=,$(gsettings__enum_file)) --schema-file=$< && mkdir -p $(@D) && touch $@ all-am: $(gsettings_SCHEMAS:.xml=.valid) uninstall-am: uninstall-gsettings-schemas install-data-am: install-gsettings-schemas .SECONDARY: $(gsettings_SCHEMAS) install-gsettings-schemas: $(gsettings_SCHEMAS) $(gsettings__enum_file) @$(NORMAL_INSTALL) if test -n "$^"; then \ test -z "$(gsettingsschemadir)" || $(MKDIR_P) "$(DESTDIR)$(gsettingsschemadir)"; \ $(INSTALL_DATA) $^ "$(DESTDIR)$(gsettingsschemadir)"; \ test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir); \ fi uninstall-gsettings-schemas: @$(NORMAL_UNINSTALL) @list='\''$(gsettings_SCHEMAS) $(gsettings__enum_file)'\''; test -n "$(gsettingsschemadir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e '\''s|^.*/||'\''`; \ test -n "$$files" || exit 0; \ echo " ( cd '\''$(DESTDIR)$(gsettingsschemadir)'\'' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(gsettingsschemadir)" && rm -f $$files test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir) clean-gsettings-schemas: rm -f $(gsettings_SCHEMAS:.xml=.valid) $(gsettings__enum_file) ifdef gsettings_ENUM_NAMESPACE $(gsettings__enum_file): $(gsettings_ENUM_FILES) $(AM_V_GEN) glib-mkenums --comments '\'''\'' --fhead "" --vhead " <@type@ id='\''$(gsettings_ENUM_NAMESPACE).@EnumName@'\''>" --vprod " " --vtail " " --ftail "" $^ > $@.tmp && mv $@.tmp $@ endif ' # Extract the first word of "glib-compile-resources", so it can be a program name with args. set dummy glib-compile-resources; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_GLIB_COMPILE_RESOURCES+:} false; then : $as_echo_n "(cached) " >&6 else case $GLIB_COMPILE_RESOURCES in [\\/]* | ?:[\\/]*) ac_cv_path_GLIB_COMPILE_RESOURCES="$GLIB_COMPILE_RESOURCES" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_GLIB_COMPILE_RESOURCES="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi GLIB_COMPILE_RESOURCES=$ac_cv_path_GLIB_COMPILE_RESOURCES if test -n "$GLIB_COMPILE_RESOURCES"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLIB_COMPILE_RESOURCES" >&5 $as_echo "$GLIB_COMPILE_RESOURCES" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi GTK_MIN_VERSION=3.10.0 pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTK" >&5 $as_echo_n "checking for GTK... " >&6; } if test -n "$GTK_CFLAGS"; then pkg_cv_GTK_CFLAGS="$GTK_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-3.0 >= \$GTK_MIN_VERSION, gmodule-2.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "gtk+-3.0 >= $GTK_MIN_VERSION, gmodule-2.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GTK_CFLAGS=`$PKG_CONFIG --cflags "gtk+-3.0 >= $GTK_MIN_VERSION, gmodule-2.0" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$GTK_LIBS"; then pkg_cv_GTK_LIBS="$GTK_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-3.0 >= \$GTK_MIN_VERSION, gmodule-2.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "gtk+-3.0 >= $GTK_MIN_VERSION, gmodule-2.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GTK_LIBS=`$PKG_CONFIG --libs "gtk+-3.0 >= $GTK_MIN_VERSION, gmodule-2.0" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then GTK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gtk+-3.0 >= $GTK_MIN_VERSION, gmodule-2.0" 2>&1` else GTK_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gtk+-3.0 >= $GTK_MIN_VERSION, gmodule-2.0" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$GTK_PKG_ERRORS" >&5 as_fn_error $? "Package requirements (gtk+-3.0 >= $GTK_MIN_VERSION, gmodule-2.0) were not met: $GTK_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables GTK_CFLAGS and GTK_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables GTK_CFLAGS and GTK_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details" "$LINENO" 5; } else GTK_CFLAGS=$pkg_cv_GTK_CFLAGS GTK_LIBS=$pkg_cv_GTK_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GSTREAMER" >&5 $as_echo_n "checking for GSTREAMER... " >&6; } if test -n "$GSTREAMER_CFLAGS"; then pkg_cv_GSTREAMER_CFLAGS="$GSTREAMER_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gstreamer-1.0, gstreamer-audio-1.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "gstreamer-1.0, gstreamer-audio-1.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GSTREAMER_CFLAGS=`$PKG_CONFIG --cflags "gstreamer-1.0, gstreamer-audio-1.0" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$GSTREAMER_LIBS"; then pkg_cv_GSTREAMER_LIBS="$GSTREAMER_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gstreamer-1.0, gstreamer-audio-1.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "gstreamer-1.0, gstreamer-audio-1.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GSTREAMER_LIBS=`$PKG_CONFIG --libs "gstreamer-1.0, gstreamer-audio-1.0" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then GSTREAMER_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gstreamer-1.0, gstreamer-audio-1.0" 2>&1` else GSTREAMER_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gstreamer-1.0, gstreamer-audio-1.0" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$GSTREAMER_PKG_ERRORS" >&5 as_fn_error $? "Package requirements (gstreamer-1.0, gstreamer-audio-1.0) were not met: $GSTREAMER_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables GSTREAMER_CFLAGS and GSTREAMER_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables GSTREAMER_CFLAGS and GSTREAMER_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details" "$LINENO" 5; } else GSTREAMER_CFLAGS=$pkg_cv_GSTREAMER_CFLAGS GSTREAMER_LIBS=$pkg_cv_GSTREAMER_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi WARNINGCFLAGS="-Wall" gtk_doc_requires="gtk-doc >= 1.14" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gtk-doc" >&5 $as_echo_n "checking for gtk-doc... " >&6; } if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$gtk_doc_requires\""; } >&5 ($PKG_CONFIG --exists --print-errors "$gtk_doc_requires") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then have_gtk_doc=yes else have_gtk_doc=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_gtk_doc" >&5 $as_echo "$have_gtk_doc" >&6; } if test "$have_gtk_doc" = "no"; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: You will not be able to create source packages with 'make dist' because $gtk_doc_requires is not found." >&5 $as_echo "$as_me: WARNING: You will not be able to create source packages with 'make dist' because $gtk_doc_requires is not found." >&2;} fi # Extract the first word of "gtkdoc-check", so it can be a program name with args. set dummy gtkdoc-check; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_GTKDOC_CHECK+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$GTKDOC_CHECK"; then ac_cv_prog_GTKDOC_CHECK="$GTKDOC_CHECK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_GTKDOC_CHECK="gtkdoc-check.test" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi GTKDOC_CHECK=$ac_cv_prog_GTKDOC_CHECK if test -n "$GTKDOC_CHECK"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GTKDOC_CHECK" >&5 $as_echo "$GTKDOC_CHECK" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "gtkdoc-check", so it can be a program name with args. set dummy gtkdoc-check; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_GTKDOC_CHECK_PATH+:} false; then : $as_echo_n "(cached) " >&6 else case $GTKDOC_CHECK_PATH in [\\/]* | ?:[\\/]*) ac_cv_path_GTKDOC_CHECK_PATH="$GTKDOC_CHECK_PATH" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_GTKDOC_CHECK_PATH="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi GTKDOC_CHECK_PATH=$ac_cv_path_GTKDOC_CHECK_PATH if test -n "$GTKDOC_CHECK_PATH"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GTKDOC_CHECK_PATH" >&5 $as_echo "$GTKDOC_CHECK_PATH" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi for ac_prog in gtkdoc-rebase do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_GTKDOC_REBASE+:} false; then : $as_echo_n "(cached) " >&6 else case $GTKDOC_REBASE in [\\/]* | ?:[\\/]*) ac_cv_path_GTKDOC_REBASE="$GTKDOC_REBASE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_GTKDOC_REBASE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi GTKDOC_REBASE=$ac_cv_path_GTKDOC_REBASE if test -n "$GTKDOC_REBASE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GTKDOC_REBASE" >&5 $as_echo "$GTKDOC_REBASE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$GTKDOC_REBASE" && break done test -n "$GTKDOC_REBASE" || GTKDOC_REBASE="true" # Extract the first word of "gtkdoc-mkpdf", so it can be a program name with args. set dummy gtkdoc-mkpdf; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_GTKDOC_MKPDF+:} false; then : $as_echo_n "(cached) " >&6 else case $GTKDOC_MKPDF in [\\/]* | ?:[\\/]*) ac_cv_path_GTKDOC_MKPDF="$GTKDOC_MKPDF" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_GTKDOC_MKPDF="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi GTKDOC_MKPDF=$ac_cv_path_GTKDOC_MKPDF if test -n "$GTKDOC_MKPDF"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GTKDOC_MKPDF" >&5 $as_echo "$GTKDOC_MKPDF" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Check whether --with-html-dir was given. if test "${with_html_dir+set}" = set; then : withval=$with_html_dir; else with_html_dir='${datadir}/gtk-doc/html' fi HTML_DIR="$with_html_dir" # Check whether --enable-gtk-doc was given. if test "${enable_gtk_doc+set}" = set; then : enableval=$enable_gtk_doc; else enable_gtk_doc=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build gtk-doc documentation" >&5 $as_echo_n "checking whether to build gtk-doc documentation... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_gtk_doc" >&5 $as_echo "$enable_gtk_doc" >&6; } if test "x$enable_gtk_doc" = "xyes" && test "$have_gtk_doc" = "no"; then as_fn_error $? " You must have $gtk_doc_requires installed to build documentation for $PACKAGE_NAME. Please install gtk-doc or disable building the documentation by adding '--disable-gtk-doc' to '$0'." "$LINENO" 5 fi if test "x$PACKAGE_NAME" != "xglib"; then pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTKDOC_DEPS" >&5 $as_echo_n "checking for GTKDOC_DEPS... " >&6; } if test -n "$GTKDOC_DEPS_CFLAGS"; then pkg_cv_GTKDOC_DEPS_CFLAGS="$GTKDOC_DEPS_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GTKDOC_DEPS_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$GTKDOC_DEPS_LIBS"; then pkg_cv_GTKDOC_DEPS_LIBS="$GTKDOC_DEPS_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GTKDOC_DEPS_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then GTKDOC_DEPS_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0" 2>&1` else GTKDOC_DEPS_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$GTKDOC_DEPS_PKG_ERRORS" >&5 : elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } : else GTKDOC_DEPS_CFLAGS=$pkg_cv_GTKDOC_DEPS_CFLAGS GTKDOC_DEPS_LIBS=$pkg_cv_GTKDOC_DEPS_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi fi # Check whether --enable-gtk-doc-html was given. if test "${enable_gtk_doc_html+set}" = set; then : enableval=$enable_gtk_doc_html; else enable_gtk_doc_html=yes fi # Check whether --enable-gtk-doc-pdf was given. if test "${enable_gtk_doc_pdf+set}" = set; then : enableval=$enable_gtk_doc_pdf; else enable_gtk_doc_pdf=no fi if test -z "$GTKDOC_MKPDF"; then enable_gtk_doc_pdf=no fi if test -z "$AM_DEFAULT_VERBOSITY"; then AM_DEFAULT_VERBOSITY=1 fi if test x$have_gtk_doc = xyes; then HAVE_GTK_DOC_TRUE= HAVE_GTK_DOC_FALSE='#' else HAVE_GTK_DOC_TRUE='#' HAVE_GTK_DOC_FALSE= fi if test x$enable_gtk_doc = xyes; then ENABLE_GTK_DOC_TRUE= ENABLE_GTK_DOC_FALSE='#' else ENABLE_GTK_DOC_TRUE='#' ENABLE_GTK_DOC_FALSE= fi if test x$enable_gtk_doc_html = xyes; then GTK_DOC_BUILD_HTML_TRUE= GTK_DOC_BUILD_HTML_FALSE='#' else GTK_DOC_BUILD_HTML_TRUE='#' GTK_DOC_BUILD_HTML_FALSE= fi if test x$enable_gtk_doc_pdf = xyes; then GTK_DOC_BUILD_PDF_TRUE= GTK_DOC_BUILD_PDF_FALSE='#' else GTK_DOC_BUILD_PDF_TRUE='#' GTK_DOC_BUILD_PDF_FALSE= fi if test -n "$LIBTOOL"; then GTK_DOC_USE_LIBTOOL_TRUE= GTK_DOC_USE_LIBTOOL_FALSE='#' else GTK_DOC_USE_LIBTOOL_TRUE='#' GTK_DOC_USE_LIBTOOL_FALSE= fi if test -n "$GTKDOC_REBASE"; then GTK_DOC_USE_REBASE_TRUE= GTK_DOC_USE_REBASE_FALSE='#' else GTK_DOC_USE_REBASE_TRUE='#' GTK_DOC_USE_REBASE_FALSE= fi # Check whether --enable-introspection was given. if test "${enable_introspection+set}" = set; then : enableval=$enable_introspection; else enable_introspection=auto fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gobject-introspection" >&5 $as_echo_n "checking for gobject-introspection... " >&6; } case $enable_introspection in #( no) : found_introspection="no (disabled, use --enable-introspection to enable)" ;; #( yes) : if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gobject-introspection-1.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "gobject-introspection-1.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : else as_fn_error $? "gobject-introspection-1.0 is not installed" "$LINENO" 5 fi if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gobject-introspection-1.0 >= 1.30.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "gobject-introspection-1.0 >= 1.30.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then found_introspection=yes else as_fn_error $? "You need to have gobject-introspection >= 1.30.0 installed to build libparlatype" "$LINENO" 5 fi ;; #( auto) : if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gobject-introspection-1.0 >= 1.30.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "gobject-introspection-1.0 >= 1.30.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then found_introspection=yes else found_introspection=no fi enable_introspection=$found_introspection ;; #( *) : as_fn_error $? "invalid argument passed to --enable-introspection, should be one of [no/auto/yes]" "$LINENO" 5 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $found_introspection" >&5 $as_echo "$found_introspection" >&6; } INTROSPECTION_SCANNER= INTROSPECTION_COMPILER= INTROSPECTION_GENERATE= INTROSPECTION_GIRDIR= INTROSPECTION_TYPELIBDIR= if test "x$found_introspection" = "xyes"; then INTROSPECTION_SCANNER=`$PKG_CONFIG --variable=g_ir_scanner gobject-introspection-1.0` INTROSPECTION_COMPILER=`$PKG_CONFIG --variable=g_ir_compiler gobject-introspection-1.0` INTROSPECTION_GENERATE=`$PKG_CONFIG --variable=g_ir_generate gobject-introspection-1.0` INTROSPECTION_GIRDIR=`$PKG_CONFIG --variable=girdir gobject-introspection-1.0` INTROSPECTION_TYPELIBDIR="$($PKG_CONFIG --variable=typelibdir gobject-introspection-1.0)" INTROSPECTION_CFLAGS=`$PKG_CONFIG --cflags gobject-introspection-1.0` INTROSPECTION_LIBS=`$PKG_CONFIG --libs gobject-introspection-1.0` INTROSPECTION_MAKEFILE=`$PKG_CONFIG --variable=datadir gobject-introspection-1.0`/gobject-introspection-1.0/Makefile.introspection fi if test "x$found_introspection" = "xyes"; then HAVE_INTROSPECTION_TRUE= HAVE_INTROSPECTION_FALSE='#' else HAVE_INTROSPECTION_TRUE='#' HAVE_INTROSPECTION_FALSE= fi # Gladeui catalog file, lib can be installed in system libdir since 3.12.2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to install glade catalog" >&5 $as_echo_n "checking whether to install glade catalog... " >&6; } # Check whether --enable-glade-catalog was given. if test "${enable_glade_catalog+set}" = set; then : enableval=$enable_glade_catalog; glade_catalog=$enableval else glade_catalog=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $glade_catalog" >&5 $as_echo "$glade_catalog" >&6; } if test "$glade_catalog" = "yes" ; then GLADE_CATALOG_TRUE= GLADE_CATALOG_FALSE='#' else GLADE_CATALOG_TRUE='#' GLADE_CATALOG_FALSE= fi if test "$glade_catalog" = "yes" ; then : pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GLADE" >&5 $as_echo_n "checking for GLADE... " >&6; } if test -n "$GLADE_CFLAGS"; then pkg_cv_GLADE_CFLAGS="$GLADE_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gladeui-2.0 >= 3.12.2\""; } >&5 ($PKG_CONFIG --exists --print-errors "gladeui-2.0 >= 3.12.2") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GLADE_CFLAGS=`$PKG_CONFIG --cflags "gladeui-2.0 >= 3.12.2" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$GLADE_LIBS"; then pkg_cv_GLADE_LIBS="$GLADE_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gladeui-2.0 >= 3.12.2\""; } >&5 ($PKG_CONFIG --exists --print-errors "gladeui-2.0 >= 3.12.2") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GLADE_LIBS=`$PKG_CONFIG --libs "gladeui-2.0 >= 3.12.2" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then GLADE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gladeui-2.0 >= 3.12.2" 2>&1` else GLADE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gladeui-2.0 >= 3.12.2" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$GLADE_PKG_ERRORS" >&5 as_fn_error $? "Package requirements (gladeui-2.0 >= 3.12.2) were not met: $GLADE_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables GLADE_CFLAGS and GLADE_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables GLADE_CFLAGS and GLADE_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details" "$LINENO" 5; } else GLADE_CFLAGS=$pkg_cv_GLADE_CFLAGS GLADE_LIBS=$pkg_cv_GLADE_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking where to install glade catalog" >&5 $as_echo_n "checking where to install glade catalog... " >&6; } GLADE_CATALOG_DIR=`$PKG_CONFIG --variable=catalogdir gladeui-2.0` { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLADE_CATALOG_DIR" >&5 $as_echo "$GLADE_CATALOG_DIR" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking where to install glade icons" >&5 $as_echo_n "checking where to install glade icons... " >&6; } GLADE_PIXMAP_DIR=`$PKG_CONFIG --variable=pixmapdir gladeui-2.0` { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLADE_PIXMAP_DIR" >&5 $as_echo "$GLADE_PIXMAP_DIR" >&6; } fi # Check whether --enable-tests was given. if test "${enable_tests+set}" = set; then : enableval=$enable_tests; tests=$enableval else tests=yes fi if test "$tests" = "yes"; then WITH_TESTS_TRUE= WITH_TESTS_FALSE='#' else WITH_TESTS_TRUE='#' WITH_TESTS_FALSE= fi # Check whether --enable-installed-tests was given. if test "${enable_installed_tests+set}" = set; then : enableval=$enable_installed_tests; case ${enableval} in yes) ENABLE_INSTALLED_TESTS="1" ;; no) ENABLE_INSTALLED_TESTS="" ;; *) as_fn_error $? "bad value ${enableval} for --enable-installed-tests" "$LINENO" 5 ;; esac fi if test "$ENABLE_INSTALLED_TESTS" = "1"; then ENABLE_INSTALLED_TESTS_TRUE= ENABLE_INSTALLED_TESTS_FALSE='#' else ENABLE_INSTALLED_TESTS_TRUE='#' ENABLE_INSTALLED_TESTS_FALSE= fi # Check whether --enable-always-build-tests was given. if test "${enable_always_build_tests+set}" = set; then : enableval=$enable_always_build_tests; case ${enableval} in yes) ENABLE_ALWAYS_BUILD_TESTS="1" ;; no) ENABLE_ALWAYS_BUILD_TESTS="" ;; *) as_fn_error $? "bad value ${enableval} for --enable-always-build-tests" "$LINENO" 5 ;; esac fi if test "$ENABLE_ALWAYS_BUILD_TESTS" = "1"; then ENABLE_ALWAYS_BUILD_TESTS_TRUE= ENABLE_ALWAYS_BUILD_TESTS_FALSE='#' else ENABLE_ALWAYS_BUILD_TESTS_TRUE='#' ENABLE_ALWAYS_BUILD_TESTS_FALSE= fi if test "$ENABLE_INSTALLED_TESTS" = "1"; then installed_test_metadir=${datadir}/installed-tests/libparlatype installed_testdir=${libexecdir}/installed-tests/libparlatype fi # Check whether --enable-valgrind was given. if test "${enable_valgrind+set}" = set; then : enableval=$enable_valgrind; enable_valgrind=$enableval else enable_valgrind= fi if test "$enable_valgrind" != "no"; then : # Check for Valgrind. # Extract the first word of "valgrind", so it can be a program name with args. set dummy valgrind; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_VALGRIND+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$VALGRIND"; then ac_cv_prog_VALGRIND="$VALGRIND" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_VALGRIND="valgrind" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi VALGRIND=$ac_cv_prog_VALGRIND if test -n "$VALGRIND"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $VALGRIND" >&5 $as_echo "$VALGRIND" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "$VALGRIND" = ""; then : if test "$enable_valgrind" = "yes"; then : as_fn_error $? "Could not find valgrind; either install it or reconfigure with --disable-valgrind" "$LINENO" 5 else enable_valgrind=no fi else enable_valgrind=yes fi fi if test "$enable_valgrind" = "yes"; then VALGRIND_ENABLED_TRUE= VALGRIND_ENABLED_FALSE='#' else VALGRIND_ENABLED_TRUE='#' VALGRIND_ENABLED_FALSE= fi VALGRIND_ENABLED=$enable_valgrind # Check for Valgrind tools we care about. valgrind_enabled_tools= # Check whether --enable-valgrind-memcheck was given. if test "${enable_valgrind_memcheck+set}" = set; then : enableval=$enable_valgrind_memcheck; enable_valgrind_memcheck=$enableval else enable_valgrind_memcheck= fi if test "$enable_valgrind" = "no"; then : enable_valgrind_memcheck=no elif test "$enable_valgrind_memcheck" != "no"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Valgrind tool memcheck" >&5 $as_echo_n "checking for Valgrind tool memcheck... " >&6; } if ${ax_cv_valgrind_tool_memcheck+:} false; then : $as_echo_n "(cached) " >&6 else ax_cv_valgrind_tool_memcheck=no if `$VALGRIND --tool=memcheck --help >/dev/null 2>&1`; then : ax_cv_valgrind_tool_memcheck=yes fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_valgrind_tool_memcheck" >&5 $as_echo "$ax_cv_valgrind_tool_memcheck" >&6; } if test "$ax_cv_valgrind_tool_memcheck" = "no"; then : if test "$enable_valgrind_memcheck" = "yes"; then : as_fn_error $? "Valgrind does not support memcheck; reconfigure with --disable-valgrind-memcheck" "$LINENO" 5 else enable_valgrind_memcheck=no fi else enable_valgrind_memcheck=yes fi fi if test "$enable_valgrind_memcheck" = "yes"; then : valgrind_enabled_tools="$valgrind_enabled_tools memcheck" fi ENABLE_VALGRIND_memcheck=$enable_valgrind_memcheck # Check whether --enable-valgrind-helgrind was given. if test "${enable_valgrind_helgrind+set}" = set; then : enableval=$enable_valgrind_helgrind; enable_valgrind_helgrind=$enableval else enable_valgrind_helgrind= fi if test "$enable_valgrind" = "no"; then : enable_valgrind_helgrind=no elif test "$enable_valgrind_helgrind" != "no"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Valgrind tool helgrind" >&5 $as_echo_n "checking for Valgrind tool helgrind... " >&6; } if ${ax_cv_valgrind_tool_helgrind+:} false; then : $as_echo_n "(cached) " >&6 else ax_cv_valgrind_tool_helgrind=no if `$VALGRIND --tool=helgrind --help >/dev/null 2>&1`; then : ax_cv_valgrind_tool_helgrind=yes fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_valgrind_tool_helgrind" >&5 $as_echo "$ax_cv_valgrind_tool_helgrind" >&6; } if test "$ax_cv_valgrind_tool_helgrind" = "no"; then : if test "$enable_valgrind_helgrind" = "yes"; then : as_fn_error $? "Valgrind does not support helgrind; reconfigure with --disable-valgrind-helgrind" "$LINENO" 5 else enable_valgrind_helgrind=no fi else enable_valgrind_helgrind=yes fi fi if test "$enable_valgrind_helgrind" = "yes"; then : valgrind_enabled_tools="$valgrind_enabled_tools helgrind" fi ENABLE_VALGRIND_helgrind=$enable_valgrind_helgrind # Check whether --enable-valgrind-drd was given. if test "${enable_valgrind_drd+set}" = set; then : enableval=$enable_valgrind_drd; enable_valgrind_drd=$enableval else enable_valgrind_drd= fi if test "$enable_valgrind" = "no"; then : enable_valgrind_drd=no elif test "$enable_valgrind_drd" != "no"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Valgrind tool drd" >&5 $as_echo_n "checking for Valgrind tool drd... " >&6; } if ${ax_cv_valgrind_tool_drd+:} false; then : $as_echo_n "(cached) " >&6 else ax_cv_valgrind_tool_drd=no if `$VALGRIND --tool=drd --help >/dev/null 2>&1`; then : ax_cv_valgrind_tool_drd=yes fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_valgrind_tool_drd" >&5 $as_echo "$ax_cv_valgrind_tool_drd" >&6; } if test "$ax_cv_valgrind_tool_drd" = "no"; then : if test "$enable_valgrind_drd" = "yes"; then : as_fn_error $? "Valgrind does not support drd; reconfigure with --disable-valgrind-drd" "$LINENO" 5 else enable_valgrind_drd=no fi else enable_valgrind_drd=yes fi fi if test "$enable_valgrind_drd" = "yes"; then : valgrind_enabled_tools="$valgrind_enabled_tools drd" fi ENABLE_VALGRIND_drd=$enable_valgrind_drd # Check whether --enable-valgrind-sgcheck was given. if test "${enable_valgrind_sgcheck+set}" = set; then : enableval=$enable_valgrind_sgcheck; enable_valgrind_sgcheck=$enableval else enable_valgrind_sgcheck= fi if test "$enable_valgrind" = "no"; then : enable_valgrind_sgcheck=no elif test "$enable_valgrind_sgcheck" != "no"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Valgrind tool sgcheck" >&5 $as_echo_n "checking for Valgrind tool sgcheck... " >&6; } if ${ax_cv_valgrind_tool_sgcheck+:} false; then : $as_echo_n "(cached) " >&6 else ax_cv_valgrind_tool_sgcheck=no if `$VALGRIND --tool=exp-sgcheck --help >/dev/null 2>&1`; then : ax_cv_valgrind_tool_sgcheck=yes fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_valgrind_tool_sgcheck" >&5 $as_echo "$ax_cv_valgrind_tool_sgcheck" >&6; } if test "$ax_cv_valgrind_tool_sgcheck" = "no"; then : if test "$enable_valgrind_sgcheck" = "yes"; then : as_fn_error $? "Valgrind does not support sgcheck; reconfigure with --disable-valgrind-sgcheck" "$LINENO" 5 else enable_valgrind_sgcheck=no fi else enable_valgrind_sgcheck=yes fi fi if test "$enable_valgrind_sgcheck" = "yes"; then : valgrind_enabled_tools="$valgrind_enabled_tools sgcheck" fi ENABLE_VALGRIND_sgcheck=$enable_valgrind_sgcheck valgrind_tools="memcheck helgrind drd sgcheck" valgrind_enabled_tools=$valgrind_enabled_tools VALGRIND_CHECK_RULES=' # Valgrind check # # Optional: # - VALGRIND_SUPPRESSIONS_FILES: Space-separated list of Valgrind suppressions # files to load. (Default: empty) # - VALGRIND_FLAGS: General flags to pass to all Valgrind tools. # (Default: --num-callers=30) # - VALGRIND_$toolname_FLAGS: Flags to pass to Valgrind $toolname (one of: # memcheck, helgrind, drd, sgcheck). (Default: various) # Optional variables VALGRIND_SUPPRESSIONS ?= $(addprefix --suppressions=,$(VALGRIND_SUPPRESSIONS_FILES)) VALGRIND_FLAGS ?= --num-callers=30 VALGRIND_memcheck_FLAGS ?= --leak-check=full --show-reachable=no VALGRIND_helgrind_FLAGS ?= --history-level=approx VALGRIND_drd_FLAGS ?= VALGRIND_sgcheck_FLAGS ?= # Internal use valgrind_log_files = $(addprefix test-suite-,$(addsuffix .log,$(valgrind_tools))) valgrind_memcheck_flags = --tool=memcheck $(VALGRIND_memcheck_FLAGS) valgrind_helgrind_flags = --tool=helgrind $(VALGRIND_helgrind_FLAGS) valgrind_drd_flags = --tool=drd $(VALGRIND_drd_FLAGS) valgrind_sgcheck_flags = --tool=exp-sgcheck $(VALGRIND_sgcheck_FLAGS) valgrind_quiet = $(valgrind_quiet_$(V)) valgrind_quiet_ = $(valgrind_quiet_$(AM_DEFAULT_VERBOSITY)) valgrind_quiet_0 = --quiet valgrind_v_use = $(valgrind_v_use_$(V)) valgrind_v_use_ = $(valgrind_v_use_$(AM_DEFAULT_VERBOSITY)) valgrind_v_use_0 = @echo " USE " $(patsubst check-valgrind-%-am,%,$''@):; # Support running with and without libtool. ifneq ($(LIBTOOL),) valgrind_lt = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=execute else valgrind_lt = endif # Use recursive makes in order to ignore errors during check check-valgrind-am: ifeq ($(VALGRIND_ENABLED),yes) $(A''M_V_at)$(MAKE) $(AM_MAKEFLAGS) -k \ $(foreach tool, $(valgrind_enabled_tools), check-valgrind-$(tool)) else @echo "Need to reconfigure with --enable-valgrind" endif # Valgrind running VALGRIND_TESTS_ENVIRONMENT = \ $(TESTS_ENVIRONMENT) \ env VALGRIND=$(VALGRIND) \ G_SLICE=always-malloc,debug-blocks \ G_DEBUG=fatal-warnings,fatal-criticals,gc-friendly VALGRIND_LOG_COMPILER = \ $(valgrind_lt) \ $(VALGRIND) $(VALGRIND_SUPPRESSIONS) --error-exitcode=1 $(VALGRIND_FLAGS) define valgrind_tool_rule check-valgrind-$(1)-am: ifeq ($$(VALGRIND_ENABLED)-$$(ENABLE_VALGRIND_$(1)),yes-yes) ifneq ($$(TESTS),) $$(valgrind_v_use)$$(MAKE) check-TESTS \ TESTS_ENVIRONMENT="$$(VALGRIND_TESTS_ENVIRONMENT)" \ LOG_COMPILER="$$(VALGRIND_LOG_COMPILER)" \ LOG_FLAGS="$$(valgrind_$(1)_flags)" \ TEST_SUITE_LOG=test-suite-$(1).log endif else ifeq ($$(VALGRIND_ENABLED),yes) @echo "Need to reconfigure with --enable-valgrind-$(1)" else @echo "Need to reconfigure with --enable-valgrind" endif endef $(foreach tool,$(valgrind_tools),$(eval $(call valgrind_tool_rule,$(tool)))) A''M_DISTCHECK_CONFIGURE_FLAGS ?= A''M_DISTCHECK_CONFIGURE_FLAGS += --disable-valgrind MOSTLYCLEANFILES ?= MOSTLYCLEANFILES += $(valgrind_log_files) .PHONY: check-valgrind $(add-prefix check-valgrind-,$(valgrind_tools)) ' # allow to override gcov location # Check whether --with-gcov was given. if test "${with_gcov+set}" = set; then : withval=$with_gcov; _AX_CODE_COVERAGE_GCOV_PROG_WITH=$with_gcov else _AX_CODE_COVERAGE_GCOV_PROG_WITH=gcov fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with code coverage support" >&5 $as_echo_n "checking whether to build with code coverage support... " >&6; } # Check whether --enable-code-coverage was given. if test "${enable_code_coverage+set}" = set; then : enableval=$enable_code_coverage; else enable_code_coverage=no fi if test x$enable_code_coverage = xyes; then CODE_COVERAGE_ENABLED_TRUE= CODE_COVERAGE_ENABLED_FALSE='#' else CODE_COVERAGE_ENABLED_TRUE='#' CODE_COVERAGE_ENABLED_FALSE= fi CODE_COVERAGE_ENABLED=$enable_code_coverage { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_code_coverage" >&5 $as_echo "$enable_code_coverage" >&6; } if test "$enable_code_coverage" = "yes" ; then : # check for gcov if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}$_AX_CODE_COVERAGE_GCOV_PROG_WITH", so it can be a program name with args. set dummy ${ac_tool_prefix}$_AX_CODE_COVERAGE_GCOV_PROG_WITH; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_GCOV+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$GCOV"; then ac_cv_prog_GCOV="$GCOV" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_GCOV="${ac_tool_prefix}$_AX_CODE_COVERAGE_GCOV_PROG_WITH" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi GCOV=$ac_cv_prog_GCOV if test -n "$GCOV"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCOV" >&5 $as_echo "$GCOV" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_GCOV"; then ac_ct_GCOV=$GCOV # Extract the first word of "$_AX_CODE_COVERAGE_GCOV_PROG_WITH", so it can be a program name with args. set dummy $_AX_CODE_COVERAGE_GCOV_PROG_WITH; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_GCOV+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_GCOV"; then ac_cv_prog_ac_ct_GCOV="$ac_ct_GCOV" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_GCOV="$_AX_CODE_COVERAGE_GCOV_PROG_WITH" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_GCOV=$ac_cv_prog_ac_ct_GCOV if test -n "$ac_ct_GCOV"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_GCOV" >&5 $as_echo "$ac_ct_GCOV" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_GCOV" = x; then GCOV=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac GCOV=$ac_ct_GCOV fi else GCOV="$ac_cv_prog_GCOV" fi if test "X$GCOV" = "X:"; then : as_fn_error $? "gcov is needed to do coverage" "$LINENO" 5 fi if test "$GCC" = "no" ; then : as_fn_error $? "not compiling with gcc, which is required for gcov code coverage" "$LINENO" 5 fi # Extract the first word of "lcov", so it can be a program name with args. set dummy lcov; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_LCOV+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$LCOV"; then ac_cv_prog_LCOV="$LCOV" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_LCOV="lcov" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi LCOV=$ac_cv_prog_LCOV if test -n "$LCOV"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LCOV" >&5 $as_echo "$LCOV" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "genhtml", so it can be a program name with args. set dummy genhtml; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_GENHTML+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$GENHTML"; then ac_cv_prog_GENHTML="$GENHTML" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_GENHTML="genhtml" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi GENHTML=$ac_cv_prog_GENHTML if test -n "$GENHTML"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GENHTML" >&5 $as_echo "$GENHTML" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$LCOV" ; then : as_fn_error $? "To enable code coverage reporting you must have lcov installed" "$LINENO" 5 fi if test -z "$GENHTML" ; then : as_fn_error $? "Could not find genhtml from the lcov package" "$LINENO" 5 fi CODE_COVERAGE_CPPFLAGS="-DNDEBUG" CODE_COVERAGE_CFLAGS="-O0 -g -fprofile-arcs -ftest-coverage" CODE_COVERAGE_CXXFLAGS="-O0 -g -fprofile-arcs -ftest-coverage" CODE_COVERAGE_LIBS="-lgcov" CODE_COVERAGE_LDFLAGS="$CODE_COVERAGE_LIBS" CODE_COVERAGE_RULES_CHECK=' -$(A''M_V_at)$(MAKE) $(AM_MAKEFLAGS) -k check $(A''M_V_at)$(MAKE) $(AM_MAKEFLAGS) code-coverage-capture ' CODE_COVERAGE_RULES_CAPTURE=' $(code_coverage_v_lcov_cap)$(LCOV) $(code_coverage_quiet) $(addprefix --directory ,$(CODE_COVERAGE_DIRECTORY)) --capture --output-file "$(CODE_COVERAGE_OUTPUT_FILE).tmp" --test-name "$(call code_coverage_sanitize,$(PACKAGE_NAME)-$(PACKAGE_VERSION))" --no-checksum --compat-libtool $(CODE_COVERAGE_LCOV_SHOPTS) $(CODE_COVERAGE_LCOV_OPTIONS) $(code_coverage_v_lcov_ign)$(LCOV) $(code_coverage_quiet) $(addprefix --directory ,$(CODE_COVERAGE_DIRECTORY)) --remove "$(CODE_COVERAGE_OUTPUT_FILE).tmp" "/tmp/*" $(CODE_COVERAGE_IGNORE_PATTERN) --output-file "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_LCOV_SHOPTS) $(CODE_COVERAGE_LCOV_RMOPTS) -@rm -f $(CODE_COVERAGE_OUTPUT_FILE).tmp $(code_coverage_v_genhtml)LANG=C $(GENHTML) $(code_coverage_quiet) $(addprefix --prefix ,$(CODE_COVERAGE_DIRECTORY)) --output-directory "$(CODE_COVERAGE_OUTPUT_DIRECTORY)" --title "$(PACKAGE_NAME)-$(PACKAGE_VERSION) Code Coverage" --legend --show-details "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_GENHTML_OPTIONS) @echo "file://$(abs_builddir)/$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html" ' CODE_COVERAGE_RULES_CLEAN=' clean: code-coverage-clean distclean: code-coverage-clean code-coverage-clean: -$(LCOV) --directory $(top_builddir) -z -rm -rf $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_FILE).tmp $(CODE_COVERAGE_OUTPUT_DIRECTORY) -find . \( -name "*.gcda" -o -name "*.gcno" -o -name "*.gcov" \) -delete ' else CODE_COVERAGE_RULES_CHECK=' @echo "Need to reconfigure with --enable-code-coverage" ' CODE_COVERAGE_RULES_CAPTURE="$CODE_COVERAGE_RULES_CHECK" CODE_COVERAGE_RULES_CLEAN='' fi CODE_COVERAGE_RULES=' # Code coverage # # Optional: # - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting. # Multiple directories may be specified, separated by whitespace. # (Default: $(top_builddir)) # - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated # by lcov for code coverage. (Default: # $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info) # - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage # reports to be created. (Default: # $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage) # - CODE_COVERAGE_BRANCH_COVERAGE: Set to 1 to enforce branch coverage, # set to 0 to disable it and leave empty to stay with the default. # (Default: empty) # - CODE_COVERAGE_LCOV_SHOPTS_DEFAULT: Extra options shared between both lcov # instances. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE) # - CODE_COVERAGE_LCOV_SHOPTS: Extra options to shared between both lcov # instances. (Default: $CODE_COVERAGE_LCOV_SHOPTS_DEFAULT) # - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov # - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the # collecting lcov instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) # - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the collecting lcov # instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) # - CODE_COVERAGE_LCOV_RMOPTS_DEFAULT: Extra options to pass to the filtering # lcov instance. (Default: empty) # - CODE_COVERAGE_LCOV_RMOPTS: Extra options to pass to the filtering lcov # instance. (Default: $CODE_COVERAGE_LCOV_RMOPTS_DEFAULT) # - CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT: Extra options to pass to the # genhtml instance. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE) # - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml # instance. (Default: $CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT) # - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore # # The generated report will be titled using the $(PACKAGE_NAME) and # $(PACKAGE_VERSION). In order to add the current git hash to the title, # use the git-version-gen script, available online. # Optional variables CODE_COVERAGE_DIRECTORY ?= $(top_builddir) CODE_COVERAGE_OUTPUT_FILE ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info CODE_COVERAGE_OUTPUT_DIRECTORY ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage CODE_COVERAGE_BRANCH_COVERAGE ?= CODE_COVERAGE_LCOV_SHOPTS_DEFAULT ?= $(if $(CODE_COVERAGE_BRANCH_COVERAGE),\ --rc lcov_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE)) CODE_COVERAGE_LCOV_SHOPTS ?= $(CODE_COVERAGE_LCOV_SHOPTS_DEFAULT) CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool "$(GCOV)" CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= $(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) CODE_COVERAGE_LCOV_OPTIONS ?= $(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) CODE_COVERAGE_LCOV_RMOPTS_DEFAULT ?= CODE_COVERAGE_LCOV_RMOPTS ?= $(CODE_COVERAGE_LCOV_RMOPTS_DEFAULT) CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT ?=\ $(if $(CODE_COVERAGE_BRANCH_COVERAGE),\ --rc genhtml_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE)) CODE_COVERAGE_GENHTML_OPTIONS ?= $(CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT) CODE_COVERAGE_IGNORE_PATTERN ?= GITIGNOREFILES ?= GITIGNOREFILES += $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_DIRECTORY) code_coverage_v_lcov_cap = $(code_coverage_v_lcov_cap_$(V)) code_coverage_v_lcov_cap_ = $(code_coverage_v_lcov_cap_$(AM_DEFAULT_VERBOSITY)) code_coverage_v_lcov_cap_0 = @echo " LCOV --capture"\ $(CODE_COVERAGE_OUTPUT_FILE); code_coverage_v_lcov_ign = $(code_coverage_v_lcov_ign_$(V)) code_coverage_v_lcov_ign_ = $(code_coverage_v_lcov_ign_$(AM_DEFAULT_VERBOSITY)) code_coverage_v_lcov_ign_0 = @echo " LCOV --remove /tmp/*"\ $(CODE_COVERAGE_IGNORE_PATTERN); code_coverage_v_genhtml = $(code_coverage_v_genhtml_$(V)) code_coverage_v_genhtml_ = $(code_coverage_v_genhtml_$(AM_DEFAULT_VERBOSITY)) code_coverage_v_genhtml_0 = @echo " GEN " $(CODE_COVERAGE_OUTPUT_DIRECTORY); code_coverage_quiet = $(code_coverage_quiet_$(V)) code_coverage_quiet_ = $(code_coverage_quiet_$(AM_DEFAULT_VERBOSITY)) code_coverage_quiet_0 = --quiet # sanitizes the test-name: replaces with underscores: dashes and dots code_coverage_sanitize = $(subst -,_,$(subst .,_,$(1))) # Use recursive makes in order to ignore errors during check check-code-coverage:'"$CODE_COVERAGE_RULES_CHECK"' # Capture code coverage data code-coverage-capture: code-coverage-capture-hook'"$CODE_COVERAGE_RULES_CAPTURE"' # Hook rule executed before code-coverage-capture, overridable by the user code-coverage-capture-hook: '"$CODE_COVERAGE_RULES_CLEAN"' A''M_DISTCHECK_CONFIGURE_FLAGS ?= A''M_DISTCHECK_CONFIGURE_FLAGS += --disable-code-coverage .PHONY: check-code-coverage code-coverage-capture code-coverage-capture-hook code-coverage-clean ' ac_config_files="$ac_config_files Makefile data/Makefile data/parlatype.pc data/parlatype.xml data/icons/Makefile docs/Makefile docs/reference/Makefile docs/reference/version.xml po/Makefile.in src/Makefile tests/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then if test "x$cache_file" != "x/dev/null"; then { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} if test ! -f "$cache_file" || test -h "$cache_file"; then cat confcache >"$cache_file" else case $cache_file in #( */* | ?:*) mv -f confcache "$cache_file"$$ && mv -f "$cache_file"$$ "$cache_file" ;; #( *) mv -f confcache "$cache_file" ;; esac fi fi else { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs { $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 $as_echo_n "checking that generated files are newer than configure... " >&6; } if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 $as_echo "done" >&6; } if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' else am__EXEEXT_TRUE='#' am__EXEEXT_FALSE= fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then as_fn_error $? "conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi ac_config_commands="$ac_config_commands po/stamp-it" if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCXX\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${HAVE_GTK_DOC_TRUE}" && test -z "${HAVE_GTK_DOC_FALSE}"; then as_fn_error $? "conditional \"HAVE_GTK_DOC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${ENABLE_GTK_DOC_TRUE}" && test -z "${ENABLE_GTK_DOC_FALSE}"; then as_fn_error $? "conditional \"ENABLE_GTK_DOC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${GTK_DOC_BUILD_HTML_TRUE}" && test -z "${GTK_DOC_BUILD_HTML_FALSE}"; then as_fn_error $? "conditional \"GTK_DOC_BUILD_HTML\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${GTK_DOC_BUILD_PDF_TRUE}" && test -z "${GTK_DOC_BUILD_PDF_FALSE}"; then as_fn_error $? "conditional \"GTK_DOC_BUILD_PDF\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${GTK_DOC_USE_LIBTOOL_TRUE}" && test -z "${GTK_DOC_USE_LIBTOOL_FALSE}"; then as_fn_error $? "conditional \"GTK_DOC_USE_LIBTOOL\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${GTK_DOC_USE_REBASE_TRUE}" && test -z "${GTK_DOC_USE_REBASE_FALSE}"; then as_fn_error $? "conditional \"GTK_DOC_USE_REBASE\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${HAVE_INTROSPECTION_TRUE}" && test -z "${HAVE_INTROSPECTION_FALSE}"; then as_fn_error $? "conditional \"HAVE_INTROSPECTION\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${GLADE_CATALOG_TRUE}" && test -z "${GLADE_CATALOG_FALSE}"; then as_fn_error $? "conditional \"GLADE_CATALOG\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${WITH_TESTS_TRUE}" && test -z "${WITH_TESTS_FALSE}"; then as_fn_error $? "conditional \"WITH_TESTS\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${ENABLE_INSTALLED_TESTS_TRUE}" && test -z "${ENABLE_INSTALLED_TESTS_FALSE}"; then as_fn_error $? "conditional \"ENABLE_INSTALLED_TESTS\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${ENABLE_ALWAYS_BUILD_TESTS_TRUE}" && test -z "${ENABLE_ALWAYS_BUILD_TESTS_FALSE}"; then as_fn_error $? "conditional \"ENABLE_ALWAYS_BUILD_TESTS\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${VALGRIND_ENABLED_TRUE}" && test -z "${VALGRIND_ENABLED_FALSE}"; then as_fn_error $? "conditional \"VALGRIND_ENABLED\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${CODE_COVERAGE_ENABLED_TRUE}" && test -z "${CODE_COVERAGE_ENABLED_FALSE}"; then as_fn_error $? "conditional \"CODE_COVERAGE_ENABLED\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi : "${CONFIG_STATUS=./config.status}" ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by libparlatype $as_me 1.5.4, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ libparlatype config.status 1.5.4 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" Copyright (C) 2012 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; --*=) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg= ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header as_fn_error $? "ambiguous option: \`$1' Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error $? "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`' predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`' postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`' predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`' postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`' compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`' LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`' reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`' reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`' old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`' compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`' GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`' lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`' archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`' enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`' export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`' old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`' old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`' archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`' archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`' module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`' module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`' with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`' allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`' no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`' hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`' hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`' hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`' hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`' hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`' hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`' inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`' link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`' always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`' export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`' exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`' include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`' prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`' postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`' file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`' hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`' compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`' predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`' postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`' predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`' postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`' compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`' LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$1 _LTECHO_EOF' } # Quote evaled strings. for var in SHELL \ ECHO \ PATH_SEPARATOR \ SED \ GREP \ EGREP \ FGREP \ LD \ NM \ LN_S \ lt_SP2NL \ lt_NL2SP \ reload_flag \ OBJDUMP \ deplibs_check_method \ file_magic_cmd \ file_magic_glob \ want_nocaseglob \ DLLTOOL \ sharedlib_from_linklib_cmd \ AR \ AR_FLAGS \ archiver_list_spec \ STRIP \ RANLIB \ CC \ CFLAGS \ compiler \ lt_cv_sys_global_symbol_pipe \ lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ nm_file_list_spec \ lt_prog_compiler_no_builtin_flag \ lt_prog_compiler_pic \ lt_prog_compiler_wl \ lt_prog_compiler_static \ lt_cv_prog_compiler_c_o \ need_locks \ MANIFEST_TOOL \ DSYMUTIL \ NMEDIT \ LIPO \ OTOOL \ OTOOL64 \ shrext_cmds \ export_dynamic_flag_spec \ whole_archive_flag_spec \ compiler_needs_object \ with_gnu_ld \ allow_undefined_flag \ no_undefined_flag \ hardcode_libdir_flag_spec \ hardcode_libdir_separator \ exclude_expsyms \ include_expsyms \ file_list_spec \ variables_saved_for_relink \ libname_spec \ library_names_spec \ soname_spec \ install_override_mode \ finish_eval \ old_striplib \ striplib \ compiler_lib_search_dirs \ predep_objects \ postdep_objects \ predeps \ postdeps \ compiler_lib_search_path \ LD_CXX \ reload_flag_CXX \ compiler_CXX \ lt_prog_compiler_no_builtin_flag_CXX \ lt_prog_compiler_pic_CXX \ lt_prog_compiler_wl_CXX \ lt_prog_compiler_static_CXX \ lt_cv_prog_compiler_c_o_CXX \ export_dynamic_flag_spec_CXX \ whole_archive_flag_spec_CXX \ compiler_needs_object_CXX \ with_gnu_ld_CXX \ allow_undefined_flag_CXX \ no_undefined_flag_CXX \ hardcode_libdir_flag_spec_CXX \ hardcode_libdir_separator_CXX \ exclude_expsyms_CXX \ include_expsyms_CXX \ file_list_spec_CXX \ compiler_lib_search_dirs_CXX \ predep_objects_CXX \ postdep_objects_CXX \ predeps_CXX \ postdeps_CXX \ compiler_lib_search_path_CXX; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in reload_cmds \ old_postinstall_cmds \ old_postuninstall_cmds \ old_archive_cmds \ extract_expsyms_cmds \ old_archive_from_new_cmds \ old_archive_from_expsyms_cmds \ archive_cmds \ archive_expsym_cmds \ module_cmds \ module_expsym_cmds \ export_symbols_cmds \ prelink_cmds \ postlink_cmds \ postinstall_cmds \ postuninstall_cmds \ finish_cmds \ sys_lib_search_path_spec \ sys_lib_dlsearch_path_spec \ reload_cmds_CXX \ old_archive_cmds_CXX \ old_archive_from_new_cmds_CXX \ old_archive_from_expsyms_cmds_CXX \ archive_cmds_CXX \ archive_expsym_cmds_CXX \ module_cmds_CXX \ module_expsym_cmds_CXX \ export_symbols_cmds_CXX \ prelink_cmds_CXX \ postlink_cmds_CXX; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done ac_aux_dir='$ac_aux_dir' xsi_shell='$xsi_shell' lt_shell_append='$lt_shell_append' # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi PACKAGE='$PACKAGE' VERSION='$VERSION' TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile' _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "data/Makefile") CONFIG_FILES="$CONFIG_FILES data/Makefile" ;; "data/parlatype.pc") CONFIG_FILES="$CONFIG_FILES data/parlatype.pc" ;; "data/parlatype.xml") CONFIG_FILES="$CONFIG_FILES data/parlatype.xml" ;; "data/icons/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/Makefile" ;; "docs/Makefile") CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;; "docs/reference/Makefile") CONFIG_FILES="$CONFIG_FILES docs/reference/Makefile" ;; "docs/reference/version.xml") CONFIG_FILES="$CONFIG_FILES docs/reference/version.xml" ;; "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;; "po/stamp-it") CONFIG_COMMANDS="$CONFIG_COMMANDS po/stamp-it" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= ac_tmp= trap 'exit_status=$? : "${ac_tmp:=$tmp}" { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ac_tmp=$tmp # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$ac_tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove sole $(srcdir), # ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ h s/// s/^/:/ s/[ ]*$/:/ s/:\$(srcdir):/:/g s/:\${srcdir}:/:/g s/:@srcdir@:/:/g s/^:*// s/:*$// x s/\(=[ ]*\).*/\1/ G s/\n// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$ac_tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_tt=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_tt"; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$ac_tmp/stdin" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ "$ac_tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$ac_tmp/stdin" case $ac_file in -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; esac \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" } >"$ac_tmp/config.h" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$ac_tmp/config.h" "$ac_file" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ || as_fn_error $? "could not create -" "$LINENO" 5 fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || { # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named 'Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir=$dirpart/$fdir; as_fn_mkdir_p # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ;; "libtool":C) # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi cfgfile="${ofile}T" trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008, 2009, 2010, 2011 Free Software # Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. # # GNU Libtool is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, or # obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # The names of the tagged configurations supported by this script. available_tags="CXX " # ### BEGIN LIBTOOL CONFIG # Which release of libtool.m4 was used? macro_version=$macro_version macro_revision=$macro_revision # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # What type of objects to build. pic_mode=$pic_mode # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # An echo program that protects backslashes. ECHO=$lt_ECHO # The PATH separator for the build system. PATH_SEPARATOR=$lt_PATH_SEPARATOR # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # A sed program that does not truncate output. SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="\$SED -e 1s/^X//" # A grep program that handles long lines. GREP=$lt_GREP # An ERE matcher. EGREP=$lt_EGREP # A literal string matcher. FGREP=$lt_FGREP # A BSD- or MS-compatible name lister. NM=$lt_NM # Whether we need soft or hard links. LN_S=$lt_LN_S # What is the maximum length of a command? max_cmd_len=$max_cmd_len # Object file suffix (normally "o"). objext=$ac_objext # Executable file suffix (normally ""). exeext=$exeext # whether the shell understands "unset". lt_unset=$lt_unset # turn spaces into newlines. SP2NL=$lt_lt_SP2NL # turn newlines into spaces. NL2SP=$lt_lt_NL2SP # convert \$build file names to \$host format. to_host_file_cmd=$lt_cv_to_host_file_cmd # convert \$build files to toolchain format. to_tool_file_cmd=$lt_cv_to_tool_file_cmd # An object symbol dumper. OBJDUMP=$lt_OBJDUMP # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method = "file_magic". file_magic_cmd=$lt_file_magic_cmd # How to find potential files when deplibs_check_method = "file_magic". file_magic_glob=$lt_file_magic_glob # Find potential files using nocaseglob when deplibs_check_method = "file_magic". want_nocaseglob=$lt_want_nocaseglob # DLL creation program. DLLTOOL=$lt_DLLTOOL # Command to associate shared and link libraries. sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd # The archiver. AR=$lt_AR # Flags to create an archive. AR_FLAGS=$lt_AR_FLAGS # How to feed a file listing to the archiver. archiver_list_spec=$lt_archiver_list_spec # A symbol stripping program. STRIP=$lt_STRIP # Commands used to install an old-style archive. RANLIB=$lt_RANLIB old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Whether to use a lock for old archive extraction. lock_old_archive_extraction=$lock_old_archive_extraction # A C compiler. LTCC=$lt_CC # LTCC compiler flags. LTCFLAGS=$lt_CFLAGS # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration. global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair. global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # Transform the output of nm in a C name address pair when lib prefix is needed. global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix # Specify filename containing input files for \$NM. nm_file_list_spec=$lt_nm_file_list_spec # The root where to search for dependent libraries,and in which our libraries should be installed. lt_sysroot=$lt_sysroot # The name of the directory that contains temporary libtool files. objdir=$objdir # Used to examine libraries when file_magic_cmd begins with "file". MAGIC_CMD=$MAGIC_CMD # Must we lock files when doing compilation? need_locks=$lt_need_locks # Manifest tool. MANIFEST_TOOL=$lt_MANIFEST_TOOL # Tool to manipulate archived DWARF debug symbol files on Mac OS X. DSYMUTIL=$lt_DSYMUTIL # Tool to change global to local symbols on Mac OS X. NMEDIT=$lt_NMEDIT # Tool to manipulate fat objects and archives on Mac OS X. LIPO=$lt_LIPO # ldd/readelf like tool for Mach-O binaries on Mac OS X. OTOOL=$lt_OTOOL # ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. OTOOL64=$lt_OTOOL64 # Old archive suffix (normally "a"). libext=$libext # Shared library suffix (normally ".so"). shrext_cmds=$lt_shrext_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Variables whose values should be saved in libtool wrapper scripts and # restored at link time. variables_saved_for_relink=$lt_variables_saved_for_relink # Do we need the "lib" prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Library versioning type. version_type=$version_type # Shared library runtime path variable. runpath_var=$runpath_var # Shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Permission mode override for installation of shared libraries. install_override_mode=$lt_install_override_mode # Command to use after installation of a shared archive. postinstall_cmds=$lt_postinstall_cmds # Command to use after uninstallation of a shared archive. postuninstall_cmds=$lt_postuninstall_cmds # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # As "finish_cmds", except a single script fragment to be evaled but # not shown. finish_eval=$lt_finish_eval # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Compile-time system search path for libraries. sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries. sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # The linker used to build libraries. LD=$lt_LD # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds # A language specific compiler. CC=$lt_compiler # Is the compiler the GNU compiler? with_gcc=$GCC # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc # Whether or not to disallow shared libs when runtime libs are static. allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec # Whether the compiler copes with passing no objects directly. compiler_needs_object=$lt_compiler_needs_object # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds # Commands used to build a shared archive. archive_cmds=$lt_archive_cmds archive_expsym_cmds=$lt_archive_expsym_cmds # Commands used to build a loadable module if different from building # a shared archive. module_cmds=$lt_module_cmds module_expsym_cmds=$lt_module_expsym_cmds # Whether we are building with GNU ld or not. with_gnu_ld=$lt_with_gnu_ld # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag # Flag that enforces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary and the resulting library dependency is # "absolute",i.e impossible to change by setting \${shlibpath_var} if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute # Set to "yes" if using the -LDIR flag during linking hardcodes DIR # into the resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR # into the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Set to "yes" if building a shared library automatically hardcodes DIR # into the library and all subsequent libraries and executables linked # against it. hardcode_automatic=$hardcode_automatic # Set to yes if linker adds runtime paths of dependent libraries # to runtime path list. inherit_rpath=$inherit_rpath # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms # Symbols that must always be exported. include_expsyms=$lt_include_expsyms # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds # Commands necessary for finishing linking programs. postlink_cmds=$lt_postlink_cmds # Specify filename containing input files. file_list_spec=$lt_file_list_spec # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # The directories searched by this compiler when creating a shared library. compiler_lib_search_dirs=$lt_compiler_lib_search_dirs # Dependencies to place before and after the objects being linked to # create a shared library. predep_objects=$lt_predep_objects postdep_objects=$lt_postdep_objects predeps=$lt_predeps postdeps=$lt_postdeps # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path # ### END LIBTOOL CONFIG _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac ltmain="$ac_aux_dir/ltmain.sh" # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) if test x"$xsi_shell" = xyes; then sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ func_dirname ()\ {\ \ case ${1} in\ \ */*) func_dirname_result="${1%/*}${2}" ;;\ \ * ) func_dirname_result="${3}" ;;\ \ esac\ } # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_basename ()$/,/^} # func_basename /c\ func_basename ()\ {\ \ func_basename_result="${1##*/}"\ } # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ func_dirname_and_basename ()\ {\ \ case ${1} in\ \ */*) func_dirname_result="${1%/*}${2}" ;;\ \ * ) func_dirname_result="${3}" ;;\ \ esac\ \ func_basename_result="${1##*/}"\ } # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ func_stripname ()\ {\ \ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ \ # positional parameters, so assign one to ordinary parameter first.\ \ func_stripname_result=${3}\ \ func_stripname_result=${func_stripname_result#"${1}"}\ \ func_stripname_result=${func_stripname_result%"${2}"}\ } # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ func_split_long_opt ()\ {\ \ func_split_long_opt_name=${1%%=*}\ \ func_split_long_opt_arg=${1#*=}\ } # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ func_split_short_opt ()\ {\ \ func_split_short_opt_arg=${1#??}\ \ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ } # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ func_lo2o ()\ {\ \ case ${1} in\ \ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ \ *) func_lo2o_result=${1} ;;\ \ esac\ } # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_xform ()$/,/^} # func_xform /c\ func_xform ()\ {\ func_xform_result=${1%.*}.lo\ } # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_arith ()$/,/^} # func_arith /c\ func_arith ()\ {\ func_arith_result=$(( $* ))\ } # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_len ()$/,/^} # func_len /c\ func_len ()\ {\ func_len_result=${#1}\ } # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$lt_shell_append" = xyes; then sed -e '/^func_append ()$/,/^} # func_append /c\ func_append ()\ {\ eval "${1}+=\\${2}"\ } # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ func_append_quoted ()\ {\ \ func_quote_for_eval "${2}"\ \ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ } # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: # Save a `func_append' function call where possible by direct use of '+=' sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: else # Save a `func_append' function call even when '+=' is not available sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$_lt_function_replace_fail" = x":"; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 $as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} fi mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" cat <<_LT_EOF >> "$ofile" # ### BEGIN LIBTOOL TAG CONFIG: CXX # The linker used to build libraries. LD=$lt_LD_CXX # How to create reloadable object files. reload_flag=$lt_reload_flag_CXX reload_cmds=$lt_reload_cmds_CXX # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds_CXX # A language specific compiler. CC=$lt_compiler_CXX # Is the compiler the GNU compiler? with_gcc=$GCC_CXX # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic_CXX # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl_CXX # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static_CXX # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc_CXX # Whether or not to disallow shared libs when runtime libs are static. allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX # Whether the compiler copes with passing no objects directly. compiler_needs_object=$lt_compiler_needs_object_CXX # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX # Commands used to build a shared archive. archive_cmds=$lt_archive_cmds_CXX archive_expsym_cmds=$lt_archive_expsym_cmds_CXX # Commands used to build a loadable module if different from building # a shared archive. module_cmds=$lt_module_cmds_CXX module_expsym_cmds=$lt_module_expsym_cmds_CXX # Whether we are building with GNU ld or not. with_gnu_ld=$lt_with_gnu_ld_CXX # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag_CXX # Flag that enforces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag_CXX # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct_CXX # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary and the resulting library dependency is # "absolute",i.e impossible to change by setting \${shlibpath_var} if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute_CXX # Set to "yes" if using the -LDIR flag during linking hardcodes DIR # into the resulting binary. hardcode_minus_L=$hardcode_minus_L_CXX # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR # into the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX # Set to "yes" if building a shared library automatically hardcodes DIR # into the library and all subsequent libraries and executables linked # against it. hardcode_automatic=$hardcode_automatic_CXX # Set to yes if linker adds runtime paths of dependent libraries # to runtime path list. inherit_rpath=$inherit_rpath_CXX # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs_CXX # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols_CXX # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds_CXX # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms_CXX # Symbols that must always be exported. include_expsyms=$lt_include_expsyms_CXX # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds_CXX # Commands necessary for finishing linking programs. postlink_cmds=$lt_postlink_cmds_CXX # Specify filename containing input files. file_list_spec=$lt_file_list_spec_CXX # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action_CXX # The directories searched by this compiler when creating a shared library. compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX # Dependencies to place before and after the objects being linked to # create a shared library. predep_objects=$lt_predep_objects_CXX postdep_objects=$lt_postdep_objects_CXX predeps=$lt_predeps_CXX postdeps=$lt_postdeps_CXX # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path_CXX # ### END LIBTOOL TAG CONFIG: CXX _LT_EOF ;; "po/stamp-it":C) if ! grep "^# INTLTOOL_MAKEFILE$" "po/Makefile.in" > /dev/null ; then as_fn_error $? "po/Makefile.in.in was not created by intltoolize." "$LINENO" 5 fi rm -f "po/stamp-it" "po/stamp-it.tmp" "po/POTFILES" "po/Makefile.tmp" >"po/stamp-it.tmp" sed '/^#/d s/^[[].*] *// /^[ ]*$/d '"s|^| $ac_top_srcdir/|" \ "$srcdir/po/POTFILES.in" | sed '$!s/$/ \\/' >"po/POTFILES" sed '/^POTFILES =/,/[^\\]$/ { /^POTFILES =/!d r po/POTFILES } ' "po/Makefile.in" >"po/Makefile" rm -f "po/Makefile.tmp" mv "po/stamp-it.tmp" "po/stamp-it" ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit 1 fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi echo " Common configuration ========================== prefix .............: ${prefix} compiler ...........: ${CC} `${CC} -dumpversion` libparlatype $VERSION ========================== enable-introspection: $enable_introspection enable-glade-catalog: ${glade_catalog} enable-gtk-doc .....: $enable_gtk_doc enable-tests .......: ${tests} enable-code-coverage: $enable_code_coverage " parlatype-1.5.4/libparlatype/Makefile.in0000644000175000017500000007210513204324033015177 00000000000000# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ @WITH_TESTS_TRUE@am__append_1 = tests subdir = . DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ $(top_srcdir)/configure $(am__configure_deps) \ $(srcdir)/config.h.in compile config.guess config.rpath \ config.sub depcomp install-sh missing ltmain.sh ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_code_coverage.m4 \ $(top_srcdir)/m4/ax_valgrind_check.m4 \ $(top_srcdir)/m4/glibtests.m4 $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ cscope distdir dist dist-all distcheck am__extra_recursive_targets = check-valgrind-recursive \ check-valgrind-memcheck-recursive \ check-valgrind-helgrind-recursive check-valgrind-drd-recursive \ check-valgrind-sgcheck-recursive am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ $(LISP)config.h.in # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags CSCOPE = cscope DIST_SUBDIRS = data po src docs tests DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best DIST_TARGETS = dist-gzip distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ CODE_COVERAGE_CPPFLAGS = @CODE_COVERAGE_CPPFLAGS@ CODE_COVERAGE_CXXFLAGS = @CODE_COVERAGE_CXXFLAGS@ CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ CODE_COVERAGE_LIBS = @CODE_COVERAGE_LIBS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_VALGRIND_drd = @ENABLE_VALGRIND_drd@ ENABLE_VALGRIND_helgrind = @ENABLE_VALGRIND_helgrind@ ENABLE_VALGRIND_memcheck = @ENABLE_VALGRIND_memcheck@ ENABLE_VALGRIND_sgcheck = @ENABLE_VALGRIND_sgcheck@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GCOV = @GCOV@ GENHTML = @GENHTML@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLADE_CATALOG_DIR = @GLADE_CATALOG_DIR@ GLADE_CFLAGS = @GLADE_CFLAGS@ GLADE_LIBS = @GLADE_LIBS@ GLADE_PIXMAP_DIR = @GLADE_PIXMAP_DIR@ GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ GSTREAMER_CFLAGS = @GSTREAMER_CFLAGS@ GSTREAMER_LIBS = @GSTREAMER_LIBS@ GTKDOC_CHECK = @GTKDOC_CHECK@ GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ GTKDOC_REBASE = @GTKDOC_REBASE@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ HTML_DIR = @HTML_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ LCOV = @LCOV@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PARLATYPE_API_VERSION = @PARLATYPE_API_VERSION@ PARLATYPE_SO_VERSION = @PARLATYPE_SO_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VALGRIND = @VALGRIND@ VALGRIND_ENABLED = @VALGRIND_ENABLED@ VERSION = @VERSION@ WARNINGCFLAGS = @WARNINGCFLAGS@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gsettingsschemadir = @gsettingsschemadir@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ installed_test_metadir = @installed_test_metadir@ installed_testdir = @installed_testdir@ intltool__v_merge_options_ = @intltool__v_merge_options_@ intltool__v_merge_options_0 = @intltool__v_merge_options_0@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ valgrind_enabled_tools = @valgrind_enabled_tools@ valgrind_tools = @valgrind_tools@ SUBDIRS = data po src docs $(am__append_1) ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS} # Distribute test infrastructure # ax_code_coverage.m4 and ax_valgrind_check.m4 would be available in autoconf-archive # ax_code_coverage.m4 first in version 2014.10.15 but we support older systems # ax_valgrind_check.m4 first in version 2015.02.04 but we support older systems EXTRA_DIST = \ config.rpath \ glib-tap.mk \ tap-driver.sh \ tap-test \ test-driver \ m4/ax_code_coverage.m4 \ m4/ax_valgrind_check.m4 \ m4/glibtests.m4 DISTCLEANFILES = `find . -mindepth 1 -iname "*~"` all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: Makefile @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @test -f $@ || rm -f stamp-h1 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" check-valgrind-local: check-valgrind-memcheck-local: check-valgrind-helgrind-local: check-valgrind-drd-local: check-valgrind-sgcheck-local: ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-tarZ: distdir @echo WARNING: "Support for shar distribution archives is" \ "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir @echo WARNING: "Support for distribution archives compressed with" \ "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build \ && ../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ --srcdir=.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile config.h installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." check-valgrind: check-valgrind-recursive check-valgrind-am: check-valgrind-local check-valgrind-drd: check-valgrind-drd-recursive check-valgrind-drd-am: check-valgrind-drd-local check-valgrind-helgrind: check-valgrind-helgrind-recursive check-valgrind-helgrind-am: check-valgrind-helgrind-local check-valgrind-memcheck: check-valgrind-memcheck-recursive check-valgrind-memcheck-am: check-valgrind-memcheck-local check-valgrind-sgcheck: check-valgrind-sgcheck-recursive check-valgrind-sgcheck-am: check-valgrind-sgcheck-local clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(am__recursive_targets) all install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ am--refresh check check-am check-valgrind-am \ check-valgrind-drd-am check-valgrind-drd-local \ check-valgrind-helgrind-am check-valgrind-helgrind-local \ check-valgrind-local check-valgrind-memcheck-am \ check-valgrind-memcheck-local check-valgrind-sgcheck-am \ check-valgrind-sgcheck-local clean clean-cscope clean-generic \ clean-libtool cscope cscopelist-am ctags ctags-am dist \ dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \ dist-xz dist-zip distcheck distclean distclean-generic \ distclean-hdr distclean-libtool distclean-tags distcleancheck \ distdir distuninstallcheck dvi dvi-am html html-am info \ info-am install install-am install-data install-data-am \ install-dvi install-dvi-am install-exec install-exec-am \ install-html install-html-am install-info install-info-am \ install-man install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: parlatype-1.5.4/libparlatype/tap-driver.sh0000755000175000017500000004607213176574165015577 00000000000000#! /bin/sh # Copyright (C) 2011-2013 Free Software Foundation, Inc. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # This file is maintained in Automake, please report # bugs to or send patches to # . scriptversion=2011-12-27.17; # UTC # Make unconditional expansion of undefined variables an error. This # helps a lot in preventing typo-related bugs. set -u me=tap-driver.sh fatal () { echo "$me: fatal: $*" >&2 exit 1 } usage_error () { echo "$me: $*" >&2 print_usage >&2 exit 2 } print_usage () { cat < # trap : 1 3 2 13 15 if test $merge -gt 0; then exec 2>&1 else exec 2>&3 fi "$@" echo $? ) | LC_ALL=C ${AM_TAP_AWK-awk} \ -v me="$me" \ -v test_script_name="$test_name" \ -v log_file="$log_file" \ -v trs_file="$trs_file" \ -v expect_failure="$expect_failure" \ -v merge="$merge" \ -v ignore_exit="$ignore_exit" \ -v comments="$comments" \ -v diag_string="$diag_string" \ ' # FIXME: the usages of "cat >&3" below could be optimized when using # FIXME: GNU awk, and/on on systems that supports /dev/fd/. # Implementation note: in what follows, `result_obj` will be an # associative array that (partly) simulates a TAP result object # from the `TAP::Parser` perl module. ## ----------- ## ## FUNCTIONS ## ## ----------- ## function fatal(msg) { print me ": " msg | "cat >&2" exit 1 } function abort(where) { fatal("internal error " where) } # Convert a boolean to a "yes"/"no" string. function yn(bool) { return bool ? "yes" : "no"; } function add_test_result(result) { if (!test_results_index) test_results_index = 0 test_results_list[test_results_index] = result test_results_index += 1 test_results_seen[result] = 1; } # Whether the test script should be re-run by "make recheck". function must_recheck() { for (k in test_results_seen) if (k != "XFAIL" && k != "PASS" && k != "SKIP") return 1 return 0 } # Whether the content of the log file associated to this test should # be copied into the "global" test-suite.log. function copy_in_global_log() { for (k in test_results_seen) if (k != "PASS") return 1 return 0 } # FIXME: this can certainly be improved ... function get_global_test_result() { if ("ERROR" in test_results_seen) return "ERROR" if ("FAIL" in test_results_seen || "XPASS" in test_results_seen) return "FAIL" all_skipped = 1 for (k in test_results_seen) if (k != "SKIP") all_skipped = 0 if (all_skipped) return "SKIP" return "PASS"; } function stringify_result_obj(result_obj) { if (result_obj["is_unplanned"] || result_obj["number"] != testno) return "ERROR" if (plan_seen == LATE_PLAN) return "ERROR" if (result_obj["directive"] == "TODO") return result_obj["is_ok"] ? "XPASS" : "XFAIL" if (result_obj["directive"] == "SKIP") return result_obj["is_ok"] ? "SKIP" : COOKED_FAIL; if (length(result_obj["directive"])) abort("in function stringify_result_obj()") return result_obj["is_ok"] ? COOKED_PASS : COOKED_FAIL } function decorate_result(result) { color_name = color_for_result[result] if (color_name) return color_map[color_name] "" result "" color_map["std"] # If we are not using colorized output, or if we do not know how # to colorize the given result, we should return it unchanged. return result } function report(result, details) { if (result ~ /^(X?(PASS|FAIL)|SKIP|ERROR)/) { msg = ": " test_script_name add_test_result(result) } else if (result == "#") { msg = " " test_script_name ":" } else { abort("in function report()") } if (length(details)) msg = msg " " details # Output on console might be colorized. print decorate_result(result) msg # Log the result in the log file too, to help debugging (this is # especially true when said result is a TAP error or "Bail out!"). print result msg | "cat >&3"; } function testsuite_error(error_message) { report("ERROR", "- " error_message) } function handle_tap_result() { details = result_obj["number"]; if (length(result_obj["description"])) details = details " " result_obj["description"] if (plan_seen == LATE_PLAN) { details = details " # AFTER LATE PLAN"; } else if (result_obj["is_unplanned"]) { details = details " # UNPLANNED"; } else if (result_obj["number"] != testno) { details = sprintf("%s # OUT-OF-ORDER (expecting %d)", details, testno); } else if (result_obj["directive"]) { details = details " # " result_obj["directive"]; if (length(result_obj["explanation"])) details = details " " result_obj["explanation"] } report(stringify_result_obj(result_obj), details) } # `skip_reason` should be empty whenever planned > 0. function handle_tap_plan(planned, skip_reason) { planned += 0 # Avoid getting confused if, say, `planned` is "00" if (length(skip_reason) && planned > 0) abort("in function handle_tap_plan()") if (plan_seen) { # Error, only one plan per stream is acceptable. testsuite_error("multiple test plans") return; } planned_tests = planned # The TAP plan can come before or after *all* the TAP results; we speak # respectively of an "early" or a "late" plan. If we see the plan line # after at least one TAP result has been seen, assume we have a late # plan; in this case, any further test result seen after the plan will # be flagged as an error. plan_seen = (testno >= 1 ? LATE_PLAN : EARLY_PLAN) # If testno > 0, we have an error ("too many tests run") that will be # automatically dealt with later, so do not worry about it here. If # $plan_seen is true, we have an error due to a repeated plan, and that # has already been dealt with above. Otherwise, we have a valid "plan # with SKIP" specification, and should report it as a particular kind # of SKIP result. if (planned == 0 && testno == 0) { if (length(skip_reason)) skip_reason = "- " skip_reason; report("SKIP", skip_reason); } } function extract_tap_comment(line) { if (index(line, diag_string) == 1) { # Strip leading `diag_string` from `line`. line = substr(line, length(diag_string) + 1) # And strip any leading and trailing whitespace left. sub("^[ \t]*", "", line) sub("[ \t]*$", "", line) # Return what is left (if any). return line; } return ""; } # When this function is called, we know that line is a TAP result line, # so that it matches the (perl) RE "^(not )?ok\b". function setup_result_obj(line) { # Get the result, and remove it from the line. result_obj["is_ok"] = (substr(line, 1, 2) == "ok" ? 1 : 0) sub("^(not )?ok[ \t]*", "", line) # If the result has an explicit number, get it and strip it; otherwise, # automatically assing the next progresive number to it. if (line ~ /^[0-9]+$/ || line ~ /^[0-9]+[^a-zA-Z0-9_]/) { match(line, "^[0-9]+") # The final `+ 0` is to normalize numbers with leading zeros. result_obj["number"] = substr(line, 1, RLENGTH) + 0 line = substr(line, RLENGTH + 1) } else { result_obj["number"] = testno } if (plan_seen == LATE_PLAN) # No further test results are acceptable after a "late" TAP plan # has been seen. result_obj["is_unplanned"] = 1 else if (plan_seen && testno > planned_tests) result_obj["is_unplanned"] = 1 else result_obj["is_unplanned"] = 0 # Strip trailing and leading whitespace. sub("^[ \t]*", "", line) sub("[ \t]*$", "", line) # This will have to be corrected if we have a "TODO"/"SKIP" directive. result_obj["description"] = line result_obj["directive"] = "" result_obj["explanation"] = "" if (index(line, "#") == 0) return # No possible directive, nothing more to do. # Directives are case-insensitive. rx = "[ \t]*#[ \t]*([tT][oO][dD][oO]|[sS][kK][iI][pP])[ \t]*" # See whether we have the directive, and if yes, where. pos = match(line, rx "$") if (!pos) pos = match(line, rx "[^a-zA-Z0-9_]") # If there was no TAP directive, we have nothing more to do. if (!pos) return # Let`s now see if the TAP directive has been escaped. For example: # escaped: ok \# SKIP # not escaped: ok \\# SKIP # escaped: ok \\\\\# SKIP # not escaped: ok \ # SKIP if (substr(line, pos, 1) == "#") { bslash_count = 0 for (i = pos; i > 1 && substr(line, i - 1, 1) == "\\"; i--) bslash_count += 1 if (bslash_count % 2) return # Directive was escaped. } # Strip the directive and its explanation (if any) from the test # description. result_obj["description"] = substr(line, 1, pos - 1) # Now remove the test description from the line, that has been dealt # with already. line = substr(line, pos) # Strip the directive, and save its value (normalized to upper case). sub("^[ \t]*#[ \t]*", "", line) result_obj["directive"] = toupper(substr(line, 1, 4)) line = substr(line, 5) # Now get the explanation for the directive (if any), with leading # and trailing whitespace removed. sub("^[ \t]*", "", line) sub("[ \t]*$", "", line) result_obj["explanation"] = line } function get_test_exit_message(status) { if (status == 0) return "" if (status !~ /^[1-9][0-9]*$/) abort("getting exit status") if (status < 127) exit_details = "" else if (status == 127) exit_details = " (command not found?)" else if (status >= 128 && status <= 255) exit_details = sprintf(" (terminated by signal %d?)", status - 128) else if (status > 256 && status <= 384) # We used to report an "abnormal termination" here, but some Korn # shells, when a child process die due to signal number n, can leave # in $? an exit status of 256+n instead of the more standard 128+n. # Apparently, both behaviours are allowed by POSIX (2008), so be # prepared to handle them both. See also Austing Group report ID # 0000051 exit_details = sprintf(" (terminated by signal %d?)", status - 256) else # Never seen in practice. exit_details = " (abnormal termination)" return sprintf("exited with status %d%s", status, exit_details) } function write_test_results() { print ":global-test-result: " get_global_test_result() > trs_file print ":recheck: " yn(must_recheck()) > trs_file print ":copy-in-global-log: " yn(copy_in_global_log()) > trs_file for (i = 0; i < test_results_index; i += 1) print ":test-result: " test_results_list[i] > trs_file close(trs_file); } BEGIN { ## ------- ## ## SETUP ## ## ------- ## '"$init_colors"' # Properly initialized once the TAP plan is seen. planned_tests = 0 COOKED_PASS = expect_failure ? "XPASS": "PASS"; COOKED_FAIL = expect_failure ? "XFAIL": "FAIL"; # Enumeration-like constants to remember which kind of plan (if any) # has been seen. It is important that NO_PLAN evaluates "false" as # a boolean. NO_PLAN = 0 EARLY_PLAN = 1 LATE_PLAN = 2 testno = 0 # Number of test results seen so far. bailed_out = 0 # Whether a "Bail out!" directive has been seen. # Whether the TAP plan has been seen or not, and if yes, which kind # it is ("early" is seen before any test result, "late" otherwise). plan_seen = NO_PLAN ## --------- ## ## PARSING ## ## --------- ## is_first_read = 1 while (1) { # Involutions required so that we are able to read the exit status # from the last input line. st = getline if (st < 0) # I/O error. fatal("I/O error while reading from input stream") else if (st == 0) # End-of-input { if (is_first_read) abort("in input loop: only one input line") break } if (is_first_read) { is_first_read = 0 nextline = $0 continue } else { curline = nextline nextline = $0 $0 = curline } # Copy any input line verbatim into the log file. print | "cat >&3" # Parsing of TAP input should stop after a "Bail out!" directive. if (bailed_out) continue # TAP test result. if ($0 ~ /^(not )?ok$/ || $0 ~ /^(not )?ok[^a-zA-Z0-9_]/) { testno += 1 setup_result_obj($0) handle_tap_result() } # TAP plan (normal or "SKIP" without explanation). else if ($0 ~ /^1\.\.[0-9]+[ \t]*$/) { # The next two lines will put the number of planned tests in $0. sub("^1\\.\\.", "") sub("[^0-9]*$", "") handle_tap_plan($0, "") continue } # TAP "SKIP" plan, with an explanation. else if ($0 ~ /^1\.\.0+[ \t]*#/) { # The next lines will put the skip explanation in $0, stripping # any leading and trailing whitespace. This is a little more # tricky in truth, since we want to also strip a potential leading # "SKIP" string from the message. sub("^[^#]*#[ \t]*(SKIP[: \t][ \t]*)?", "") sub("[ \t]*$", ""); handle_tap_plan(0, $0) } # "Bail out!" magic. # Older versions of prove and TAP::Harness (e.g., 3.17) did not # recognize a "Bail out!" directive when preceded by leading # whitespace, but more modern versions (e.g., 3.23) do. So we # emulate the latter, "more modern" behaviour. else if ($0 ~ /^[ \t]*Bail out!/) { bailed_out = 1 # Get the bailout message (if any), with leading and trailing # whitespace stripped. The message remains stored in `$0`. sub("^[ \t]*Bail out![ \t]*", ""); sub("[ \t]*$", ""); # Format the error message for the bailout_message = "Bail out!" if (length($0)) bailout_message = bailout_message " " $0 testsuite_error(bailout_message) } # Maybe we have too look for dianogtic comments too. else if (comments != 0) { comment = extract_tap_comment($0); if (length(comment)) report("#", comment); } } ## -------- ## ## FINISH ## ## -------- ## # A "Bail out!" directive should cause us to ignore any following TAP # error, as well as a non-zero exit status from the TAP producer. if (!bailed_out) { if (!plan_seen) { testsuite_error("missing test plan") } else if (planned_tests != testno) { bad_amount = testno > planned_tests ? "many" : "few" testsuite_error(sprintf("too %s tests run (expected %d, got %d)", bad_amount, planned_tests, testno)) } if (!ignore_exit) { # Fetch exit status from the last line. exit_message = get_test_exit_message(nextline) if (exit_message) testsuite_error(exit_message) } } write_test_results() exit 0 } # End of "BEGIN" block. ' # TODO: document that we consume the file descriptor 3 :-( } 3>"$log_file" test $? -eq 0 || fatal "I/O or internal error" # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: parlatype-1.5.4/libparlatype/configure.ac0000644000175000017500000000703313204247737015435 00000000000000# -*- Autoconf -*- # Process this file with autoconf to produce a configure script. AC_PREREQ([2.69]) AC_INIT([libparlatype], [1.5.4], [https://github.com/gkarsay/parlatype/issues]) AC_CONFIG_AUX_DIR([.]) AM_INIT_AUTOMAKE([-Wall -Werror foreign -Wno-portability]) AC_CONFIG_SRCDIR([src/pt-player.c]) AC_CONFIG_HEADERS([config.h]) AC_CONFIG_MACRO_DIR([m4]) AC_SUBST([GETTEXT_PACKAGE], AC_PACKAGE_NAME) IT_PROG_INTLTOOL(0.50.2) AM_SILENT_RULES([yes]) LT_INIT([disable-static]) # Define these substitions here to keep all version information in one place. # For information on how to properly maintain the library version information, # refer to the libtool manual, section "Updating library version information": # http://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html AC_SUBST([PARLATYPE_SO_VERSION], [1:4:0]) # Parlatype is unstable, we don't use API version yet AC_SUBST([PARLATYPE_API_VERSION], [1.0]) # Checks for programs. AC_PROG_CC AC_PROG_CXX # Checks for libraries. # Checks for header files. AC_CHECK_HEADERS([string.h]) # Checks for typedefs, structures, and compiler characteristics. AC_TYPE_SSIZE_T # Checks for library functions. AC_CHECK_FUNCS([atexit]) GLIB_GSETTINGS AC_PATH_PROG(GLIB_COMPILE_RESOURCES, glib-compile-resources) GTK_MIN_VERSION=3.10.0 PKG_CHECK_MODULES([GTK], [gtk+-3.0 >= $GTK_MIN_VERSION, gmodule-2.0]) PKG_CHECK_MODULES([GSTREAMER], [gstreamer-1.0, gstreamer-audio-1.0]) WARNINGCFLAGS="-Wall" AC_SUBST([WARNINGCFLAGS]) GTK_DOC_CHECK([1.14],[--flavour no-tmpl]) GOBJECT_INTROSPECTION_CHECK([1.30.0]) # Gladeui catalog file, lib can be installed in system libdir since 3.12.2 AC_MSG_CHECKING([whether to install glade catalog]) AC_ARG_ENABLE([glade-catalog], [AS_HELP_STRING([--enable-glade-catalog], [install a glade catalog file [default=no]])], [glade_catalog=$enableval], [glade_catalog=no]) AC_MSG_RESULT([$glade_catalog]) AM_CONDITIONAL([GLADE_CATALOG], [ test "$glade_catalog" = "yes" ]) AS_IF([ test "$glade_catalog" = "yes" ], [PKG_CHECK_MODULES(GLADE, [gladeui-2.0 >= 3.12.2]) AC_MSG_CHECKING([where to install glade catalog]) GLADE_CATALOG_DIR=`$PKG_CONFIG --variable=catalogdir gladeui-2.0` AC_MSG_RESULT([$GLADE_CATALOG_DIR]) AC_MSG_CHECKING([where to install glade icons]) GLADE_PIXMAP_DIR=`$PKG_CONFIG --variable=pixmapdir gladeui-2.0` AC_MSG_RESULT([$GLADE_PIXMAP_DIR]) AC_SUBST(GLADE_PIXMAP_DIR) AC_SUBST(GLADE_CATALOG_DIR)]) AC_ARG_ENABLE([tests], [AS_HELP_STRING([--enable-tests], [build tests [default=yes]])], [tests=$enableval], [tests=yes]) AM_CONDITIONAL(WITH_TESTS, [test "$tests" = "yes"]) GLIB_TESTS AX_VALGRIND_DFLT([memcheck], [on]) AX_VALGRIND_CHECK AX_CODE_COVERAGE AC_CONFIG_FILES([Makefile data/Makefile data/parlatype.pc data/parlatype.xml data/icons/Makefile docs/Makefile docs/reference/Makefile docs/reference/version.xml po/Makefile.in src/Makefile tests/Makefile]) AC_OUTPUT dnl ========================================================================== echo " Common configuration ========================== prefix .............: ${prefix} compiler ...........: ${CC} `${CC} -dumpversion` libparlatype $VERSION ========================== enable-introspection: $enable_introspection enable-glade-catalog: ${glade_catalog} enable-gtk-doc .....: $enable_gtk_doc enable-tests .......: ${tests} enable-code-coverage: $enable_code_coverage " parlatype-1.5.4/libparlatype/depcomp0000755000175000017500000005601613167645076014537 00000000000000#! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2013-05-30.07; # UTC # Copyright (C) 1999-2013 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by 'PROGRAMS ARGS'. object Object file output by 'PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputting dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac # Get the directory component of the given path, and save it in the # global variables '$dir'. Note that this directory component will # be either empty or ending with a '/' character. This is deliberate. set_dir_from () { case $1 in */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; *) dir=;; esac } # Get the suffix-stripped basename of the given path, and save it the # global variable '$base'. set_base_from () { base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` } # If no dependency file was actually created by the compiler invocation, # we still have to create a dummy depfile, to avoid errors with the # Makefile "include basename.Plo" scheme. make_dummy_depfile () { echo "#dummy" > "$depfile" } # Factor out some common post-processing of the generated depfile. # Requires the auxiliary global variable '$tmpdepfile' to be set. aix_post_process_depfile () { # If the compiler actually managed to produce a dependency file, # post-process it. if test -f "$tmpdepfile"; then # Each line is of the form 'foo.o: dependency.h'. # Do two passes, one to just change these to # $object: dependency.h # and one to simply output # dependency.h: # which is needed to avoid the deleted-header problem. { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" } > "$depfile" rm -f "$tmpdepfile" else make_dummy_depfile fi } # A tabulation character. tab=' ' # A newline character. nl=' ' # Character ranges might be problematic outside the C locale. # These definitions help. upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ lower=abcdefghijklmnopqrstuvwxyz digits=0123456789 alpha=${upper}${lower} if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Avoid interferences from the environment. gccflag= dashmflag= # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi cygpath_u="cygpath -u -f -" if test "$depmode" = msvcmsys; then # This is just like msvisualcpp but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvisualcpp fi if test "$depmode" = msvc7msys; then # This is just like msvc7 but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvc7 fi if test "$depmode" = xlc; then # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. gccflag=-qmakedep=gcc,-MF depmode=gcc fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. ## Unfortunately, FreeBSD c89 acceptance of flags depends upon ## the command line argument order; so add the flags where they ## appear in depend2.am. Note that the slowdown incurred here ## affects only configure: in makefiles, %FASTDEP% shortcuts this. for arg do case $arg in -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; *) set fnord "$@" "$arg" ;; esac shift # fnord shift # $arg done "$@" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. ## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. ## (see the conditional assignment to $gccflag above). ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). Also, it might not be ## supported by the other compilers which use the 'gcc' depmode. ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The second -e expression handles DOS-style file names with drive # letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the "deleted header file" problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. ## Some versions of gcc put a space before the ':'. On the theory ## that the space means something, we add a space to the output as ## well. hp depmode also adds that space, but also prefixes the VPATH ## to the object. Take care to not repeat it in the output. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like '#:fec' to the end of the # dependency line. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ | tr "$nl" ' ' >> "$depfile" echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" ;; xlc) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts '$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else tmpdepfile1=$dir$base.u tmpdepfile2=$dir$base.u tmpdepfile3=$dir$base.u "$@" -M fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done aix_post_process_depfile ;; tcc) # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 # FIXME: That version still under development at the moment of writing. # Make that this statement remains true also for stable, released # versions. # It will wrap lines (doesn't matter whether long or short) with a # trailing '\', as in: # # foo.o : \ # foo.c \ # foo.h \ # # It will put a trailing '\' even on the last line, and will use leading # spaces rather than leading tabs (at least since its commit 0394caf7 # "Emit spaces for -MD"). "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. # We have to change lines of the first kind to '$object: \'. sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" # And for each line of the second kind, we have to emit a 'dep.h:' # dummy dependency, to avoid the deleted-header problem. sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" rm -f "$tmpdepfile" ;; ## The order of this option in the case statement is important, since the ## shell code in configure will try each of these formats in the order ## listed in this file. A plain '-MD' option would be understood by many ## compilers, so we must ensure this comes after the gcc and icc options. pgcc) # Portland's C compiler understands '-MD'. # Will always output deps to 'file.d' where file is the root name of the # source file under compilation, even if file resides in a subdirectory. # The object file name does not affect the name of the '.d' file. # pgcc 10.2 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using '\' : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... set_dir_from "$object" # Use the source, not the object, to determine the base name, since # that's sadly what pgcc will do too. set_base_from "$source" tmpdepfile=$base.d # For projects that build the same source file twice into different object # files, the pgcc approach of using the *source* file root name can cause # problems in parallel builds. Use a locking strategy to avoid stomping on # the same $tmpdepfile. lockdir=$base.d-lock trap " echo '$0: caught signal, cleaning up...' >&2 rmdir '$lockdir' exit 1 " 1 2 13 15 numtries=100 i=$numtries while test $i -gt 0; do # mkdir is a portable test-and-set. if mkdir "$lockdir" 2>/dev/null; then # This process acquired the lock. "$@" -MD stat=$? # Release the lock. rmdir "$lockdir" break else # If the lock is being held by a different process, wait # until the winning process is done or we timeout. while test -d "$lockdir" && test $i -gt 0; do sleep 1 i=`expr $i - 1` done fi i=`expr $i - 1` done trap - 1 2 13 15 if test $i -le 0; then echo "$0: failed to acquire lock after $numtries attempts" >&2 echo "$0: check lockdir '$lockdir'" >&2 exit 1 fi if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp2) # The "hp" stanza above does not work with aCC (C++) and HP's ia64 # compilers, which have integrated preprocessors. The correct option # to use with these is +Maked; it writes dependencies to a file named # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d "$@" -Wc,+Maked else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d "$@" +Maked fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" # Add 'dependent.h:' lines. sed -ne '2,${ s/^ *// s/ \\*$// s/$/:/ p }' "$tmpdepfile" >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in 'foo.d' instead, so we check for that too. # Subdirectories are respected. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then # Libtool generates 2 separate objects for the 2 libraries. These # two compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir$base.o.d # libtool 1.5 tmpdepfile2=$dir.libs/$base.o.d # Likewise. tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d "$@" -MD fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done # Same post-processing that is required for AIX mode. aix_post_process_depfile ;; msvc7) if test "$libtool" = yes; then showIncludes=-Wc,-showIncludes else showIncludes=-showIncludes fi "$@" $showIncludes > "$tmpdepfile" stat=$? grep -v '^Note: including file: ' "$tmpdepfile" if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The first sed program below extracts the file names and escapes # backslashes for cygpath. The second sed program outputs the file # name when reading, but also accumulates all include files in the # hold buffer in order to output them again at the end. This only # works with sed implementations that can handle large buffers. sed < "$tmpdepfile" -n ' /^Note: including file: *\(.*\)/ { s//\1/ s/\\/\\\\/g p }' | $cygpath_u | sort -u | sed -n ' s/ /\\ /g s/\(.*\)/'"$tab"'\1 \\/p s/.\(.*\) \\/\1:/ H $ { s/.*/'"$tab"'/ G p }' >> "$depfile" echo >> "$depfile" # make sure the fragment doesn't end with a backslash rm -f "$tmpdepfile" ;; msvc7msys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for ':' # in the target name. This is to cope with DOS-style filenames: # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. "$@" $dashmflag | sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this sed invocation # correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift cleared=no eat=no for arg do case $cleared in no) set ""; shift cleared=yes ;; esac if test $eat = yes; then eat=no continue fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -arch) eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" # makedepend may prepend the VPATH from the source file name to the object. # No need to regex-escape $object, excess matching of '.' is harmless. sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process the last invocation # correctly. Breaking it into two sed invocations is a workaround. sed '1,2d' "$tmpdepfile" \ | tr ' ' "$nl" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E \ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi IFS=" " for arg do case "$arg" in -o) shift ;; $object) shift ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E 2>/dev/null | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" echo "$tab" >> "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; msvcmsys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: parlatype-1.5.4/libparlatype/install-sh0000755000175000017500000003413713167645076015166 00000000000000#!/bin/sh # install - install a program, script, or datafile scriptversion=2011-11-20.07; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # 'make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. nl=' ' IFS=" "" $nl" # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} if test -z "$doit"; then doit_exec=exec else doit_exec=$doit fi # Put in absolute file names if you don't have them in your path; # or use environment vars. chgrpprog=${CHGRPPROG-chgrp} chmodprog=${CHMODPROG-chmod} chownprog=${CHOWNPROG-chown} cmpprog=${CMPPROG-cmp} cpprog=${CPPROG-cp} mkdirprog=${MKDIRPROG-mkdir} mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} posix_glob='?' initialize_posix_glob=' test "$posix_glob" != "?" || { if (set -f) 2>/dev/null; then posix_glob= else posix_glob=: fi } ' posix_mkdir= # Desired mode of installed file. mode=0755 chgrpcmd= chmodcmd=$chmodprog chowncmd= mvcmd=$mvprog rmcmd="$rmprog -f" stripcmd= src= dst= dir_arg= dst_arg= copy_on_change=false no_target_directory= usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: --help display this help and exit. --version display version info and exit. -c (ignored) -C install only if different (preserve the last data modification time) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -s $stripprog installed files. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test $# -ne 0; do case $1 in -c) ;; -C) copy_on_change=true;; -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 case $mode in *' '* | *' '* | *' '* | *'*'* | *'?'* | *'['*) echo "$0: invalid mode: $mode" >&2 exit 1;; esac shift;; -o) chowncmd="$chownprog $2" shift;; -s) stripcmd=$stripprog;; -t) dst_arg=$2 # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac shift;; -T) no_target_directory=true;; --version) echo "$0 $scriptversion"; exit $?;; --) shift break;; -*) echo "$0: invalid option: $1" >&2 exit 1;; *) break;; esac shift done if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dst_arg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dst_arg" shift # fnord fi shift # arg dst_arg=$arg # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac done fi if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call 'install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then do_exit='(exit $ret); exit $ret' trap "ret=129; $do_exit" 1 trap "ret=130; $do_exit" 2 trap "ret=141; $do_exit" 13 trap "ret=143; $do_exit" 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. case $mode in # Optimize common cases. *644) cp_umask=133;; *755) cp_umask=22;; *[0-7]) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac fi for src do # Protect names problematic for 'test' and other utilities. case $src in -* | [=\(\)!]) src=./$src;; esac if test -n "$dir_arg"; then dst=$src dstdir=$dst test -d "$dstdir" dstdir_status=$? else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dst_arg # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else # Prefer dirname, but fall back on a substitute if dirname fails. dstdir=` (dirname "$dst") 2>/dev/null || expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$dst" : 'X\(//\)[^/]' \| \ X"$dst" : 'X\(//\)$' \| \ X"$dst" : 'X\(/\)' \| . 2>/dev/null || echo X"$dst" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q' ` test -d "$dstdir" dstdir_status=$? fi fi obsolete_mkdir_used=false if test $dstdir_status != 0; then case $posix_mkdir in '') # Create intermediate dirs using mode 755 as modified by the umask. # This is like FreeBSD 'install' as of 1997-10-28. umask=`umask` case $stripcmd.$umask in # Optimize common cases. *[2367][2367]) mkdir_umask=$umask;; .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; *[0-7]) mkdir_umask=`expr $umask + 22 \ - $umask % 100 % 40 + $umask % 20 \ - $umask % 10 % 4 + $umask % 2 `;; *) mkdir_umask=$umask,go-w;; esac # With -d, create the new directory with the user-specified mode. # Otherwise, rely on $mkdir_umask. if test -n "$dir_arg"; then mkdir_mode=-m$mode else mkdir_mode= fi posix_mkdir=false case $umask in *[123567][0-7][0-7]) # POSIX mkdir -p sets u+wx bits regardless of umask, which # is incompatible with FreeBSD 'install' when (umask & 300) != 0. ;; *) # $RANDOM is not portable (e.g. dash); use it when possible to # lower collision chance tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0 # As "mkdir -p" follows symlinks and we work in /tmp possibly; so # create the $tmpdir first (and fail if unsuccessful) to make sure # that nobody tries to guess the $tmpdir name. if (umask $mkdir_umask && $mkdirprog $mkdir_mode "$tmpdir" && exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. test_tmpdir="$tmpdir/a" ls_ld_tmpdir=`ls -ld "$test_tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null fi trap '' 0;; esac;; esac if $posix_mkdir && ( umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else # The umask is ridiculous, or mkdir does not conform to POSIX, # or it failed possibly due to a race condition. Create the # directory the slow way, step by step, checking for races as we go. case $dstdir in /*) prefix='/';; [-=\(\)!]*) prefix='./';; *) prefix='';; esac eval "$initialize_posix_glob" oIFS=$IFS IFS=/ $posix_glob set -f set fnord $dstdir shift $posix_glob set +f IFS=$oIFS prefixes= for d do test X"$d" = X && continue prefix=$prefix$d if test -d "$prefix"; then prefixes= else if $posix_mkdir; then (umask=$mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break # Don't fail if two instances are running concurrently. test -d "$prefix" || exit 1 else case $prefix in *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; *) qprefix=$prefix;; esac prefixes="$prefixes '$qprefix'" fi fi prefix=$prefix/ done if test -n "$prefixes"; then # Don't fail if two instances are running concurrently. (umask $mkdir_umask && eval "\$doit_exec \$mkdirprog $prefixes") || test -d "$dstdir" || exit 1 obsolete_mkdir_used=true fi fi fi if test -n "$dir_arg"; then { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && eval "$initialize_posix_glob" && $posix_glob set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && $posix_glob set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then rm -f "$dsttmp" else # Rename the file to the real destination. $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. { # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { test ! -f "$dst" || $doit $rmcmd -f "$dst" 2>/dev/null || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } } || { echo "$0: cannot unlink or rename $dst" >&2 (exit 1); exit 1 } } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 trap '' 0 fi done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: parlatype-1.5.4/libparlatype/tap-test0000755000175000017500000000012413176574165014636 00000000000000#! /bin/sh # run a GTest in tap mode. The test binary is passed as $1 $1 -k --tap parlatype-1.5.4/libparlatype/src/0000755000175000017500000000000013204324044013776 500000000000000parlatype-1.5.4/libparlatype/src/resources/0000755000175000017500000000000013204324044016010 500000000000000parlatype-1.5.4/libparlatype/src/resources/pt-waveviewer.css0000644000175000017500000000046013176574165021272 00000000000000/* custom styles for PtWaveviewer */ .cursor { color: #cc0000; } .cursor:backdrop { color: #cc6060; } .selection { color: rgba(90%,50%,50%,0.5); } scrolledwindow undershoot.left, scrolledwindow undershoot.right, scrolledwindow overshoot.left, scrolledwindow overshoot.right { background: none; } parlatype-1.5.4/libparlatype/src/resources/libparlatype.gresource.xml0000644000175000017500000000025413176574165023163 00000000000000 pt-waveviewer.css parlatype-1.5.4/libparlatype/src/pt-progress-dialog.h0000644000175000017500000000337013171727132017624 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #ifndef PT_PROGRESS_DIALOG_H #define PT_PROGRESS_DIALOG_H #include #define PT_TYPE_PROGRESS_DIALOG (pt_progress_dialog_get_type()) #define PT_PROGRESS_DIALOG(obj) (G_TYPE_CHECK_INSTANCE_CAST((obj), PT_TYPE_PROGRESS_DIALOG, PtProgressDialog)) #define PT_IS_PROGRESS_DIALOG(obj) (G_TYPE_CHECK_INSTANCE_TYPE ((obj), PT_TYPE_PROGRESS_DIALOG)) typedef struct _PtProgressDialog PtProgressDialog; typedef struct _PtProgressDialogClass PtProgressDialogClass; typedef struct _PtProgressDialogPrivate PtProgressDialogPrivate; /** * PtProgressDialog: * * The #PtProgressDialog contains only private fields and should not be directly accessed. */ struct _PtProgressDialog { GtkMessageDialog dialog; /*< private > */ PtProgressDialogPrivate *priv; }; struct _PtProgressDialogClass { GtkMessageDialogClass parent_class; }; GType pt_progress_dialog_get_type (void) G_GNUC_CONST; void pt_progress_dialog_set_progress (PtProgressDialog *dlg, gdouble progress); PtProgressDialog *pt_progress_dialog_new (GtkWindow *win); G_END_DECLS #endif parlatype-1.5.4/libparlatype/src/pt-waveviewer-waveform.c0000644000175000017500000001357513200427162020527 00000000000000/* Copyright (C) 2017 Gabor Karsay * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ /* PtWaveviewerWaveform is a GtkDrawingArea. It is part of a GtkOverlay stack. It renders only the waveform. */ #include "config.h" #include "pt-waveviewer-waveform.h" struct _PtWaveviewerWaveformPrivate { /* Wavedata */ gfloat *peaks; gint64 peaks_size; /* size of array */ /* Rendering */ GdkRGBA wave_color; gboolean rtl; }; G_DEFINE_TYPE_WITH_PRIVATE (PtWaveviewerWaveform, pt_waveviewer_waveform, GTK_TYPE_DRAWING_AREA); static gint64 flip_pixel (PtWaveviewerWaveform *self, gint64 pixel) { /* In ltr layouts each pixel on the x-axis corresponds to a sample in the array. In rtl layouts this is flipped, e.g. the first pixel corresponds to the last sample in the array. */ gint64 samples; gint widget_width; samples = self->priv->peaks_size / 2; widget_width = gtk_widget_get_allocated_width (GTK_WIDGET (self)); /* Case: waveform is shorter than drawing area */ if (samples < widget_width) return (widget_width - pixel); else return (samples - pixel); } static gint64 pixel_to_array (PtWaveviewerWaveform *self, gint64 pixel) { /* Convert a position in the drawing area to an index in the peaks array. The returned index is the peak's min value, +1 is the max value. If the array would be exceeded, return -1 */ gint64 result; if (self->priv->rtl) pixel = flip_pixel (self, pixel); result = pixel * 2; if (result + 1 >= self->priv->peaks_size) result = -1; return result; } static gboolean pt_waveviewer_waveform_draw (GtkWidget *widget, cairo_t *cr) { PtWaveviewerWaveform *self = (PtWaveviewerWaveform *) widget; gfloat *peaks = self->priv->peaks; GtkStyleContext *context; gint pixel; gint array; gdouble min, max; gint width, height; gint half, middle; gdouble left, right; context = gtk_widget_get_style_context (widget); height = gtk_widget_get_allocated_height (widget); width = gtk_widget_get_allocated_width (widget); gtk_render_background (context, cr, 0, 0, width, height); if (!peaks) return FALSE; /* paint waveform */ /* get extents, only render what we're asked for */ cairo_clip_extents (cr, &left, NULL, &right, NULL); half = height / 2 - 1; middle = height / 2; gdk_cairo_set_source_rgba (cr, &self->priv->wave_color); for (pixel = (gint)left; pixel <= (gint)right; pixel += 1) { array = pixel_to_array (self, pixel); if (array == -1) /* in ltr we could break, but rtl needs to continue */ continue; min = (middle + half * peaks[array] * -1); max = (middle - half * peaks[array + 1]); cairo_move_to (cr, pixel, min); cairo_line_to (cr, pixel, max); /* cairo_stroke also possible after loop, but then slower */ cairo_stroke (cr); } return FALSE; } static void update_cached_style_values (PtWaveviewerWaveform *self) { /* Update color and direction */ GtkStyleContext *context; GtkStateFlags state; GdkWindow *window = NULL; window = gtk_widget_get_parent_window (GTK_WIDGET (self)); if (!window) return; context = gtk_widget_get_style_context (GTK_WIDGET (self)); state = gtk_style_context_get_state (context); gtk_style_context_get_color (context, state, &self->priv->wave_color); if (state & GTK_STATE_FLAG_DIR_RTL) self->priv->rtl = TRUE; else self->priv->rtl = FALSE; } static void pt_waveviewer_waveform_state_flags_changed (GtkWidget *widget, GtkStateFlags flags) { update_cached_style_values (PT_WAVEVIEWER_WAVEFORM (widget)); GTK_WIDGET_CLASS (pt_waveviewer_waveform_parent_class)->state_flags_changed (widget, flags); } static void pt_waveviewer_waveform_style_updated (GtkWidget *widget) { PtWaveviewerWaveform *self = (PtWaveviewerWaveform *) widget; GTK_WIDGET_CLASS (pt_waveviewer_waveform_parent_class)->style_updated (widget); update_cached_style_values (self); gtk_widget_queue_draw (GTK_WIDGET (self)); } static void pt_waveviewer_waveform_realize (GtkWidget *widget) { GTK_WIDGET_CLASS (pt_waveviewer_waveform_parent_class)->realize (widget); update_cached_style_values (PT_WAVEVIEWER_WAVEFORM (widget)); } void pt_waveviewer_waveform_set (PtWaveviewerWaveform *self, gfloat *peaks, gint64 peaks_size) { self->priv->peaks = peaks; self->priv->peaks_size = peaks_size; gtk_widget_queue_draw (GTK_WIDGET (self)); } static void pt_waveviewer_waveform_init (PtWaveviewerWaveform *self) { self->priv = pt_waveviewer_waveform_get_instance_private (self); GtkStyleContext *context; self->priv->peaks = NULL; self->priv->peaks_size = 0; context = gtk_widget_get_style_context (GTK_WIDGET (self)); gtk_style_context_add_class (context, GTK_STYLE_CLASS_VIEW); gtk_widget_set_events (GTK_WIDGET (self), GDK_ALL_EVENTS_MASK); } static void pt_waveviewer_waveform_class_init (PtWaveviewerWaveformClass *klass) { GtkWidgetClass *widget_class = GTK_WIDGET_CLASS (klass); widget_class->draw = pt_waveviewer_waveform_draw; widget_class->realize = pt_waveviewer_waveform_realize; widget_class->state_flags_changed = pt_waveviewer_waveform_state_flags_changed; widget_class->style_updated = pt_waveviewer_waveform_style_updated; } GtkWidget * pt_waveviewer_waveform_new (void) { return GTK_WIDGET (g_object_new (PT_TYPE_WAVEVIEWER_WAVEFORM, NULL)); } parlatype-1.5.4/libparlatype/src/pt-waveviewer-focus.h0000644000175000017500000000363113200427162020015 00000000000000/* Copyright (C) Gabor Karsay 2017 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #ifndef PT_WAVEVIEWER_FOCUS_H #define PT_WAVEVIEWER_FOCUS_H #include G_BEGIN_DECLS #define PT_TYPE_WAVEVIEWER_FOCUS (pt_waveviewer_focus_get_type ()) #define PT_WAVEVIEWER_FOCUS(obj) (G_TYPE_CHECK_INSTANCE_CAST ((obj), PT_TYPE_WAVEVIEWER_FOCUS, PtWaveviewerFocus)) #define PT_IS_WAVEVIEWER_FOCUS(obj) (G_TYPE_CHECK_INSTANCE_TYPE ((obj), PT_TYPE_WAVEVIEWER_FOCUS)) #define PT_WAVEVIEWER_FOCUS_CLASS(klass) (G_TYPE_CHECK_CLASS_CAST ((klass), PT_TYPE_WAVEVIEWER_FOCUS, PtWaveviewerFocusClass)) #define PT_IS_WAVEVIEWER_FOCUS_CLASS(obj) (G_TYPE_CHECK_CLASS_TYPE ((klass), PT_TYPE_WAVEVIEWER_FOCUS)) typedef struct _PtWaveviewerFocus PtWaveviewerFocus; typedef struct _PtWaveviewerFocusClass PtWaveviewerFocusClass; typedef struct _PtWaveviewerFocusPrivate PtWaveviewerFocusPrivate; struct _PtWaveviewerFocus { GtkDrawingArea parent; /*< private > */ PtWaveviewerFocusPrivate *priv; }; struct _PtWaveviewerFocusClass { GtkDrawingAreaClass klass; }; GType pt_waveviewer_focus_get_type (void) G_GNUC_CONST; void pt_waveviewer_focus_set (PtWaveviewerFocus *self, gboolean focus); GtkWidget *pt_waveviewer_focus_new (void); G_END_DECLS #endif // PT_WAVEVIEWER_FOCUS_H parlatype-1.5.4/libparlatype/src/pt-waveviewer.h0000644000175000017500000000405113176574165016717 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #ifndef PT_WAVEVIEWER_H #define PT_WAVEVIEWER_H #include #include "pt-wavedata.h" G_BEGIN_DECLS #define PT_TYPE_WAVEVIEWER (pt_waveviewer_get_type ()) #define PT_WAVEVIEWER(obj) (G_TYPE_CHECK_INSTANCE_CAST ((obj), PT_TYPE_WAVEVIEWER, PtWaveviewer)) #define PT_IS_WAVEVIEWER(obj) (G_TYPE_CHECK_INSTANCE_TYPE ((obj), PT_TYPE_WAVEVIEWER)) #define PT_WAVEVIEWER_CLASS(klass) (G_TYPE_CHECK_CLASS_CAST ((klass), PT_TYPE_WAVEVIEWER, PtWaveviewerClass)) #define PT_IS_WAVEVIEWER_CLASS(obj) (G_TYPE_CHECK_CLASS_TYPE ((klass), PT_TYPE_WAVEVIEWER)) typedef struct _PtWaveviewer PtWaveviewer; typedef struct _PtWaveviewerClass PtWaveviewerClass; typedef struct _PtWaveviewerPrivate PtWaveviewerPrivate; /** * PtWaveviewer: * * The #PtWaveviewer contains only private fields and should not be directly accessed. */ struct _PtWaveviewer { GtkScrolledWindow parent; /*< private > */ PtWaveviewerPrivate *priv; }; struct _PtWaveviewerClass { GtkScrolledWindowClass klass; }; GType pt_waveviewer_get_type (void) G_GNUC_CONST; gboolean pt_waveviewer_get_follow_cursor (PtWaveviewer *self); void pt_waveviewer_set_follow_cursor (PtWaveviewer *self, gboolean follow); void pt_waveviewer_set_wave (PtWaveviewer *self, PtWavedata *data); GtkWidget *pt_waveviewer_new (void); G_END_DECLS #endif // PT_WAVEVIEWER_H parlatype-1.5.4/libparlatype/src/pt-waveviewer-cursor.c0000644000175000017500000001516213202143653020212 00000000000000/* Copyright (C) 2017 Gabor Karsay * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ /* PtWaveviewerCursor is a GtkDrawingArea. It is part of a GtkOverlay stack. It renders only the cursor. */ #include "config.h" #include "pt-waveviewer.h" #include "pt-waveviewer-cursor.h" #define MARKER_BOX_W 10 #define MARKER_BOX_H 8 struct _PtWaveviewerCursorPrivate { cairo_surface_t *cursor; GdkRGBA cursor_color; gint position; gboolean focus; }; G_DEFINE_TYPE_WITH_PRIVATE (PtWaveviewerCursor, pt_waveviewer_cursor, GTK_TYPE_DRAWING_AREA); static gboolean pt_waveviewer_cursor_draw (GtkWidget *widget, cairo_t *cr) { PtWaveviewerCursor *self = (PtWaveviewerCursor *) widget; GtkStyleContext *context; gint height; gint width; height = gtk_widget_get_allocated_height (widget); width = gtk_widget_get_allocated_width (widget); /* clear everything */ cairo_set_source_rgba (cr, 0, 0, 0, 0); cairo_rectangle (cr, 0, 0, width, height); cairo_fill (cr); /* paint cursor */ if (self->priv->position == -1) return FALSE; cairo_set_source_surface (cr, self->priv->cursor, self->priv->position - MARKER_BOX_W / 2, 0); cairo_paint (cr); /* render focus */ if (self->priv->focus) { context = gtk_widget_get_style_context (widget); gtk_render_focus (context, cr, self->priv->position - MARKER_BOX_W / 2 - 2, 1, MARKER_BOX_W + 4, height - 2); } return FALSE; } static void draw_cursor (PtWaveviewerCursor *self) { gint height; height = gtk_widget_get_allocated_height (GTK_WIDGET (self)); gtk_widget_queue_draw_area (GTK_WIDGET (self), self->priv->position - MARKER_BOX_W / 2, 0, MARKER_BOX_W, height); } static void cache_cursor (PtWaveviewerCursor *self) { if (!gtk_widget_get_realized (GTK_WIDGET (self))) return; if (self->priv->cursor) cairo_surface_destroy (self->priv->cursor); cairo_t *cr; gint height = gtk_widget_get_allocated_height (GTK_WIDGET (self)); self->priv->cursor = gdk_window_create_similar_surface (gtk_widget_get_window (GTK_WIDGET (self)), CAIRO_CONTENT_COLOR_ALPHA, MARKER_BOX_W, height); cr = cairo_create (self->priv->cursor); gdk_cairo_set_source_rgba (cr, &self->priv->cursor_color); cairo_move_to (cr, 0 + MARKER_BOX_W / 2, height); cairo_line_to (cr, 0 + MARKER_BOX_W / 2, 0); cairo_stroke (cr); cairo_move_to (cr, 0, 0); cairo_line_to (cr, 0 + MARKER_BOX_W, 0); cairo_line_to (cr, 0 + MARKER_BOX_W / 2 , 0 + MARKER_BOX_H); cairo_line_to (cr, 0, 0); cairo_fill (cr); cairo_destroy (cr); } static void pt_waveviewer_cursor_size_allocate (GtkWidget *widget, GtkAllocation *rectangle) { GTK_WIDGET_CLASS (pt_waveviewer_cursor_parent_class)->size_allocate (widget, rectangle); /* If widget changed vertical size, cursor's size has to be adjusted */ cache_cursor (PT_WAVEVIEWER_CURSOR (widget)); } static void update_cached_style_values (PtWaveviewerCursor *self) { /* Update color */ GtkStyleContext *context; GtkStateFlags state; GdkWindow *window = NULL; window = gtk_widget_get_parent_window (GTK_WIDGET (self)); if (!window) return; context = gtk_widget_get_style_context (GTK_WIDGET (self)); state = gtk_style_context_get_state (context); gtk_style_context_get_color (context, state, &self->priv->cursor_color); cache_cursor (self); } static void pt_waveviewer_cursor_state_flags_changed (GtkWidget *widget, GtkStateFlags flags) { update_cached_style_values (PT_WAVEVIEWER_CURSOR (widget)); GTK_WIDGET_CLASS (pt_waveviewer_cursor_parent_class)->state_flags_changed (widget, flags); } static void pt_waveviewer_cursor_style_updated (GtkWidget *widget) { PtWaveviewerCursor *self = (PtWaveviewerCursor *) widget; GTK_WIDGET_CLASS (pt_waveviewer_cursor_parent_class)->style_updated (widget); update_cached_style_values (self); draw_cursor (self); } static void pt_waveviewer_cursor_realize (GtkWidget *widget) { GTK_WIDGET_CLASS (pt_waveviewer_cursor_parent_class)->realize (widget); update_cached_style_values (PT_WAVEVIEWER_CURSOR (widget)); } void pt_waveviewer_cursor_render (PtWaveviewerCursor *self, gint position) { if (self->priv->position == position) return; /* first erase old position */ draw_cursor (self); self->priv->position = position; draw_cursor (self); } void pt_waveviewer_cursor_set_focus (PtWaveviewerCursor *self, gboolean focus) { if (self->priv->focus == focus) return; self->priv->focus = focus; draw_cursor (self); } static void pt_waveviewer_cursor_init (PtWaveviewerCursor *self) { self->priv = pt_waveviewer_cursor_get_instance_private (self); GtkStyleContext *context; self->priv->cursor = NULL; self->priv->focus = FALSE; self->priv->position = -1; context = gtk_widget_get_style_context (GTK_WIDGET (self)); gtk_style_context_add_class (context, "cursor"); gtk_widget_set_events (GTK_WIDGET (self), GDK_ALL_EVENTS_MASK); } static void pt_waveviewer_cursor_finalize (GObject *object) { PtWaveviewerCursor *self = PT_WAVEVIEWER_CURSOR (object); if (self->priv->cursor) cairo_surface_destroy (self->priv->cursor); G_OBJECT_CLASS (pt_waveviewer_cursor_parent_class)->finalize (object); } static void pt_waveviewer_cursor_class_init (PtWaveviewerCursorClass *klass) { GObjectClass *gobject_class = G_OBJECT_CLASS (klass); GtkWidgetClass *widget_class = GTK_WIDGET_CLASS (klass); gobject_class->finalize = pt_waveviewer_cursor_finalize; widget_class->draw = pt_waveviewer_cursor_draw; widget_class->realize = pt_waveviewer_cursor_realize; widget_class->size_allocate = pt_waveviewer_cursor_size_allocate; widget_class->state_flags_changed = pt_waveviewer_cursor_state_flags_changed; widget_class->style_updated = pt_waveviewer_cursor_style_updated; } GtkWidget * pt_waveviewer_cursor_new (void) { return GTK_WIDGET (g_object_new (PT_TYPE_WAVEVIEWER_CURSOR, NULL)); } parlatype-1.5.4/libparlatype/src/pt-player.h0000644000175000017500000000774113176574165016040 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #ifndef PT_PLAYER_H #define PT_PLAYER_H #include #include "pt-wavedata.h" #define PT_TYPE_PLAYER (pt_player_get_type()) #define PT_PLAYER(obj) (G_TYPE_CHECK_INSTANCE_CAST((obj), PT_TYPE_PLAYER, PtPlayer)) #define PT_IS_PLAYER(obj) (G_TYPE_CHECK_INSTANCE_TYPE ((obj), PT_TYPE_PLAYER)) typedef struct _PtPlayer PtPlayer; typedef struct _PtPlayerClass PtPlayerClass; typedef struct _PtPlayerPrivate PtPlayerPrivate; /** * PtPlayer: * * The #PtPlayer contains only private fields and should not be directly accessed. */ struct _PtPlayer { GObject parent; /*< private > */ PtPlayerPrivate *priv; }; struct _PtPlayerClass { GObjectClass parent_class; }; /** * PtPrecisionType: * @PT_PRECISION_SECOND: Rounds to full seconds, e.g. 1:23 (1 minute, 23 seconds) * @PT_PRECISION_SECOND_10TH: Round to 1/10 seconds, e.g. 1:23.4 * @PT_PRECISION_SECOND_100TH: Round to 1/100 seconds, e.g. 1:23.45 * * Enum values indicating desired precision of time strings. */ typedef enum { PT_PRECISION_SECOND, PT_PRECISION_SECOND_10TH, PT_PRECISION_SECOND_100TH, /*< private >*/ PT_PRECISION_INVALID } PtPrecisionType; GType pt_player_get_type (void) G_GNUC_CONST; PtWavedata* pt_player_get_data (PtPlayer *player, gint pps); void pt_player_pause (PtPlayer *player); void pt_player_play (PtPlayer *player); void pt_player_set_selection (PtPlayer *player, gint64 start, gint64 end); void pt_player_clear_selection (PtPlayer *player); gboolean pt_player_open_uri_finish (PtPlayer *player, GAsyncResult *result, GError **error); void pt_player_open_uri_async (PtPlayer *player, gchar *uri, GAsyncReadyCallback callback, gpointer user_data); gboolean pt_player_open_uri (PtPlayer *player, gchar *uri, GError **error); void pt_player_cancel (PtPlayer *player); void pt_player_jump_relative (PtPlayer *player, gint milliseconds); void pt_player_jump_to_position (PtPlayer *player, gint milliseconds); void pt_player_jump_to_permille (PtPlayer *player, guint permille); gint pt_player_get_permille (PtPlayer *player); void pt_player_set_speed (PtPlayer *player, gdouble speed); void pt_player_set_volume (PtPlayer *player, gdouble volume); void pt_player_mute_volume (PtPlayer *player, gboolean mute); void pt_player_rewind (PtPlayer *player, gdouble speed); void pt_player_fast_forward (PtPlayer *player, gdouble speed); gint64 pt_player_get_position (PtPlayer *player); gint64 pt_player_get_duration (PtPlayer *player); gchar* pt_player_get_uri (PtPlayer *player); gchar* pt_player_get_filename (PtPlayer *player); gchar* pt_player_get_time_string (gint time, gint duration, PtPrecisionType precision); gchar* pt_player_get_current_time_string (PtPlayer *player, PtPrecisionType precision); gchar* pt_player_get_duration_time_string (PtPlayer *player, PtPrecisionType precision); gchar* pt_player_get_timestamp (PtPlayer *player); gboolean pt_player_string_is_timestamp (PtPlayer *player, gchar *timestamp); gboolean pt_player_goto_timestamp (PtPlayer *player, gchar *timestamp); PtPlayer* pt_player_new (GError **error); #endif parlatype-1.5.4/libparlatype/src/pt-waveloader.c0000644000175000017500000004102213200375206016635 00000000000000/* Copyright (C) 2006 Buzztrax team * Copyright (C) Gabor Karsay 2016 * * Taken from wave.c (bt_wave_load_from_uri) from Buzztrax and heavily modified. * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #define _POSIX_SOURCE /* fileno */ #include "config.h" #include /* FILE, tmpfile, fileno, fclose */ #include #define GETTEXT_PACKAGE PACKAGE #include #include #include #include /* fstat */ #include "pt-waveloader.h" struct _PtWaveloaderPrivate { GstElement *pipeline; GstElement *fmt; gchar *uri; gboolean downmix; gint64 duration; gint channels; gint rate; gint64 data_size; gint bus_watch_id; gint progress_timeout; gdouble progress; gint fd; FILE *tf; }; enum { PROP_0, PROP_URI, N_PROPERTIES }; static GParamSpec *obj_properties[N_PROPERTIES] = { NULL, }; G_DEFINE_TYPE_WITH_PRIVATE (PtWaveloader, pt_waveloader, G_TYPE_OBJECT) /** * SECTION: pt-waveloader * @short_description: Loads the waveform for a given file. * @stability: Unstable * @include: parlatype/pt-waveloader.h * * An object to load waveform data from an audio file. The raw data can be * used by a widget to visually represent a waveform. */ static void remove_timeout (PtWaveloader *wl) { if (wl->priv->progress_timeout > 0) { g_source_remove (wl->priv->progress_timeout); wl->priv->progress_timeout = 0; } } static void on_wave_loader_new_pad (GstElement *bin, GstPad *pad, gpointer user_data) { if (!gst_element_link (bin, GST_ELEMENT (user_data))) { GST_WARNING ("Can't link output of wave decoder to converter."); } } static gboolean setup_pipeline (PtWaveloader *wl) { gboolean result = TRUE; GstElement *src, *dec, *conv, *sink; GstCaps *caps; /* create loader pipeline */ wl->priv->pipeline = gst_pipeline_new ("wave-loader"); src = gst_element_make_from_uri (GST_URI_SRC, wl->priv->uri, NULL, NULL); dec = gst_element_factory_make ("decodebin", NULL); conv = gst_element_factory_make ("audioconvert", NULL); wl->priv->fmt = gst_element_factory_make ("capsfilter", NULL); sink = gst_element_factory_make ("fdsink", NULL); /* configure elements */ caps = gst_caps_new_simple ("audio/x-raw", "format", G_TYPE_STRING, GST_AUDIO_NE (S16), "layout", G_TYPE_STRING, "interleaved", "rate", GST_TYPE_INT_RANGE, 1, G_MAXINT, NULL); if (wl->priv->downmix) gst_caps_set_simple (caps, "channels", G_TYPE_INT, 1, NULL); else gst_caps_set_simple (caps, "channels", GST_TYPE_INT_RANGE, 1, 2, NULL); g_object_set (wl->priv->fmt, "caps", caps, NULL); gst_caps_unref (caps); g_object_set (sink, "fd", wl->priv->fd, "sync", FALSE, NULL); /* add and link */ gst_bin_add_many (GST_BIN (wl->priv->pipeline), src, dec, conv, wl->priv->fmt, sink, NULL); result = gst_element_link (src, dec); if (!result) { GST_WARNING_OBJECT (wl->priv->pipeline, "Can't link wave loader pipeline (src ! dec ! conv ! fmt ! sink)."); return result; } result = gst_element_link_many (conv, wl->priv->fmt, sink, NULL); if (!result) { GST_WARNING_OBJECT (wl->priv->pipeline, "Can't link wave loader pipeline (conf ! fmt ! sink)."); return result; } g_signal_connect (dec, "pad-added", G_CALLBACK (on_wave_loader_new_pad), (gpointer) conv); return result; } static gboolean check_progress (GTask *task) { /* This timeout runs parallel to message bus (bus_handler()). If it's removed, the message bus has to be removed, too, and also the other way round. */ PtWaveloader *wl = g_task_get_source_object (task); gint64 dur; gint64 pos; gdouble temp; /* Check if task was cancelled and reset pipeline */ if (g_cancellable_is_cancelled (g_task_get_cancellable (task))) { gst_element_set_state (wl->priv->pipeline, GST_STATE_NULL); g_source_remove (wl->priv->bus_watch_id); wl->priv->bus_watch_id = 0; wl->priv->progress_timeout = 0; g_task_return_boolean (task, FALSE); g_object_unref (task); return G_SOURCE_REMOVE; } /* Query position and duration and emit progress signal */ if (!gst_element_query_position (wl->priv->pipeline, GST_FORMAT_TIME, &pos)) return G_SOURCE_CONTINUE; if (!gst_element_query_duration (wl->priv->pipeline, GST_FORMAT_TIME, &dur)) return G_SOURCE_CONTINUE; temp = (gdouble) pos / dur; if (temp > wl->priv->progress && temp < 1) { wl->priv->progress = temp; g_signal_emit_by_name (wl, "progress", wl->priv->progress); } return G_SOURCE_CONTINUE; } static gint64 calculate_duration (gint64 data_size, gint px_per_sec) { /* Calculates streams duration from data size exactly the way pt-waveviewer.c does */ gint64 result; gint64 samples; gint one_pixel; samples = data_size / 2; one_pixel = 1000 / px_per_sec; result = samples / px_per_sec * 1000; /* = full seconds */ result += (samples % px_per_sec) * one_pixel; return result; } static gboolean bus_handler (GstBus *bus, GstMessage *msg, gpointer data) { GTask *task = (GTask *) data; PtWaveloader *wl = g_task_get_source_object (task); g_debug ("Message: %s; sent by: %s", GST_MESSAGE_TYPE_NAME (msg), GST_MESSAGE_SRC_NAME (msg)); switch (GST_MESSAGE_TYPE (msg)) { case GST_MESSAGE_ERROR: { gchar *debug; GError *error; remove_timeout (wl); gst_message_parse_error (msg, &error, &debug); g_debug ("ERROR from element %s: %s", GST_OBJECT_NAME (msg->src), error->message); g_debug ("Debugging info: %s", (debug) ? debug : "none"); g_free (debug); wl->priv->bus_watch_id = 0; g_task_return_error (task, error); g_object_unref (task); return FALSE; } case GST_MESSAGE_EOS: { GstPad *pad; /* query length and convert to samples */ if (!gst_element_query_duration (wl->priv->pipeline, GST_FORMAT_TIME, &wl->priv->duration)) { GST_WARNING ("getting sample duration failed"); } /* get caps for sample rate and channels */ if ((pad = gst_element_get_static_pad (wl->priv->fmt, "src"))) { GstCaps *caps = gst_pad_get_current_caps (pad); if (caps && GST_CAPS_IS_SIMPLE (caps)) { GstStructure *structure = gst_caps_get_structure (caps, 0); gst_structure_get_int (structure, "channels", &wl->priv->channels); gst_structure_get_int (structure, "rate", &wl->priv->rate); } else { GST_WARNING ("No caps or format has not been fixed."); wl->priv->channels = 1; wl->priv->rate = GST_AUDIO_DEF_RATE; } if (caps) gst_caps_unref (caps); gst_object_unref (pad); } g_debug ("sample decoded: channels=%d, rate=%d, length=%" GST_TIME_FORMAT, wl->priv->channels, wl->priv->rate, GST_TIME_ARGS (wl->priv->duration)); remove_timeout (wl); wl->priv->bus_watch_id = 0; g_task_return_boolean (task, TRUE); g_object_unref (task); return FALSE; } case GST_MESSAGE_DURATION_CHANGED: break; default: break; } return TRUE; } /** * pt_waveloader_load_finish: * @wl: a #PtWaveloader * @result: the #GAsyncResult passed to your #GAsyncReadyCallback * @error: (allow-none): a pointer to a NULL #GError, or NULL * * Gives the result of the async load operation. A cancelled operation results * in an error, too. * * Return value: TRUE if successful, or FALSE with error set */ gboolean pt_waveloader_load_finish (PtWaveloader *wl, GAsyncResult *result, GError **error) { g_return_val_if_fail (g_task_is_valid (result, wl), FALSE); return g_task_propagate_boolean (G_TASK (result), error); } /** * pt_waveloader_load_async: * @wl: a #PtWaveloader * @cancellable: (allow-none): a #GCancellable or NULL * @callback: (scope async): a #GAsyncReadyCallback to call when the operation is complete * @user_data: (closure): user_data for callback * * Writes the raw sample data to a temporary file and also gets the number of * channels, the bit rate and the exact duration. Load only once and on success * the data can be retrieved as a #PtWavedata. It's a programmer's error trying * to retrieve the data without prior loading. * * Emits a progress signal while saving the temporary file. * * In your callback call #pt_waveloader_load_finish to get the result of the * operation. */ void pt_waveloader_load_async (PtWaveloader *wl, GCancellable *cancellable, GAsyncReadyCallback callback, gpointer user_data) { GTask *task; GstBus *bus; task = g_task_new (wl, cancellable, callback, user_data); /* setup file descriptor */ if (!(wl->priv->tf = tmpfile ())) { g_task_return_new_error ( task, G_FILE_ERROR, G_FILE_ERROR_FAILED, _("Failed to open temporary file.")); g_object_unref (task); return; } wl->priv->fd = fileno (wl->priv->tf); /* setup pipeline */ if (!setup_pipeline (wl)) { g_task_return_new_error ( task, GST_CORE_ERROR, GST_CORE_ERROR_FAILED, _("Failed to setup GStreamer pipeline.")); g_object_unref (task); return; } /* setup message handler */ bus = gst_pipeline_get_bus (GST_PIPELINE (wl->priv->pipeline)); wl->priv->bus_watch_id = gst_bus_add_watch (bus, bus_handler, task); gst_object_unref (bus); /* run pipeline and start progress (and cancel) timeout */ if (gst_element_set_state (wl->priv->pipeline, GST_STATE_PLAYING) == GST_STATE_CHANGE_FAILURE) { gst_element_set_state (wl->priv->pipeline, GST_STATE_NULL); g_task_return_new_error ( task, GST_CORE_ERROR, GST_CORE_ERROR_STATE_CHANGE, _("Failed to start GStreamer pipeline.")); g_object_unref (task); return; } wl->priv->progress_timeout = g_timeout_add (30, (GSourceFunc) check_progress, task); } /** * pt_waveloader_get_duration: * @wl: a #PtWaveloader * * Returns the duration of stream. As the whole stream is scanned, this is * supposed to be an exact duration, not an estimate. * * Return value: duration in nanoseconds as used by GStreamer */ gint64 pt_waveloader_get_duration (PtWaveloader *wl) { return wl->priv->duration; } /** * pt_waveloader_get_data: * @wl: a #PtWaveloader * @pps: the requested pixel per second ratio * * Returns wave data needed for visual representation as raw data. The * requested resolution is given as pixel per seconds, e.g. 100 means one second * is represented by 100 samples, is 100 pixels wide. The returned resolution * doesn't have to be necessarily exactly the requested resolution, it might be * a bit differnt, depending on the bit rate. * * Return value: (transfer full): the #PtWavedata, after use free with pt_wavedata_free() */ PtWavedata* pt_waveloader_get_data (PtWaveloader *wl, gint pps) { gfloat *array = NULL; gint64 i; gint k; gfloat d, vmin, vmax; gint chunk_size; gint chunk_bytes; ssize_t bytes __attribute__ ((unused)); /* stat temp file, query size in bytes and compute number of samples */ struct stat buf; g_debug ("breakpoint 1"); if (fstat (wl->priv->fd, &buf) != 0) { g_debug (_("Failed to open temporary file.")); return NULL; } /* Adjust pixel per second ratio if there's a remainder */ for (i = pps; i > 10; i--) { if (wl->priv->rate % i == 0) { pps = i; break; } } chunk_size = wl->priv->rate / pps; chunk_bytes = 2 * chunk_size; wl->priv->data_size = buf.st_size / chunk_size; /* Data size should match exactly duration or less, but sometimes it doesn't ... */ while (calculate_duration (wl->priv->data_size, pps) > GST_TIME_AS_MSECONDS (wl->priv->duration)) { g_debug ("adjusting array size"); wl->priv->data_size -= 2 * wl->priv->channels; } g_debug ("array size: %" G_GINT64_FORMAT " ", wl->priv->data_size); g_debug ("samples: %" G_GINT64_FORMAT " ", wl->priv->data_size / 2 * wl->priv->channels); g_debug ("pixels per sec: %d", pps); gint16 temp[chunk_size]; if (!(array = g_try_malloc (sizeof (gfloat) * wl->priv->data_size))) { g_debug ("sample is too long or empty"); return NULL; } if (lseek (wl->priv->fd, 0, SEEK_SET) != 0) { g_debug ("sample not loaded!!!"); return NULL; } for (i = 0; i < wl->priv->data_size / 2; i++) { bytes = read (wl->priv->fd, temp, chunk_bytes); vmin = 0; vmax = 0; for (k = 0; k < chunk_size; k++) { d = temp[k]; if (d < vmin) vmin = d; if (d > vmax) vmax = d; } if (vmin > 0 && vmax > 0) vmin = 0; else if (vmin < 0 && vmax < 0) vmax = 0; array[i*2] = vmin / 32768.0; array[i*2+1] = vmax / 32768.0; } PtWavedata *data = pt_wavedata_new (array, wl->priv->data_size, wl->priv->channels, pps); g_free (array); g_debug ("waveloader get data finished"); return data; } /* --------------------- Init and GObject management ------------------------ */ static void pt_waveloader_init (PtWaveloader *wl) { wl->priv = pt_waveloader_get_instance_private (wl); GError *gst_error = NULL; gst_init_check (NULL, NULL, &gst_error); if (gst_error) { g_debug ("PtWaveloader failed to init GStreamer"); } wl->priv->pipeline = NULL; wl->priv->fd = -1; wl->priv->progress = 0; wl->priv->bus_watch_id = 0; wl->priv->progress_timeout = 0; wl->priv->data_size = 0; wl->priv->downmix = TRUE; /* we support only mono for now */ } static void pt_waveloader_dispose (GObject *object) { PtWaveloader *wl; wl = PT_WAVELOADER (object); g_free (wl->priv->uri); if (wl->priv->tf) { // fd is fileno() of a tf fclose (wl->priv->tf); wl->priv->tf = NULL; wl->priv->fd = -1; } else if (wl->priv->fd != -1) { close (wl->priv->fd); wl->priv->fd = -1; } if (wl->priv->bus_watch_id > 0) { g_source_remove (wl->priv->bus_watch_id); wl->priv->bus_watch_id = 0; } remove_timeout (wl); if (wl->priv->pipeline) { gst_element_set_state (wl->priv->pipeline, GST_STATE_NULL); gst_object_unref (GST_OBJECT (wl->priv->pipeline)); wl->priv->pipeline = NULL; } G_OBJECT_CLASS (pt_waveloader_parent_class)->dispose (object); } static void pt_waveloader_set_property (GObject *object, guint property_id, const GValue *value, GParamSpec *pspec) { PtWaveloader *wl; wl = PT_WAVELOADER (object); switch (property_id) { case PROP_URI: g_free (wl->priv->uri); wl->priv->uri = g_value_dup_string (value); break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, property_id, pspec); break; } } static void pt_waveloader_get_property (GObject *object, guint property_id, GValue *value, GParamSpec *pspec) { PtWaveloader *wl; wl = PT_WAVELOADER (object); switch (property_id) { case PROP_URI: g_value_set_string (value, wl->priv->uri); break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, property_id, pspec); break; } } static void pt_waveloader_class_init (PtWaveloaderClass *klass) { G_OBJECT_CLASS (klass)->set_property = pt_waveloader_set_property; G_OBJECT_CLASS (klass)->get_property = pt_waveloader_get_property; G_OBJECT_CLASS (klass)->dispose = pt_waveloader_dispose; /** * PtWaveloader::progress: * @wl: the waveloader emitting the signal * @progress: the new progress state, ranging from 0.0 to 1.0 * * Indicates progress on a scale from 0.0 to 1.0, however it does not * emit the value 0.0 nor 1.0. Wait for a successful operation until * any gui element showing progress is dismissed. */ g_signal_new ("progress", PT_TYPE_WAVELOADER, G_SIGNAL_RUN_FIRST, 0, NULL, NULL, g_cclosure_marshal_VOID__DOUBLE, G_TYPE_NONE, 1, G_TYPE_DOUBLE); /** * PtWaveloader:uri: * * URI of the audio file. */ obj_properties[PROP_URI] = g_param_spec_string ( "uri", "URI to load from", "URI to load from", "", G_PARAM_READWRITE | G_PARAM_CONSTRUCT); g_object_class_install_properties ( G_OBJECT_CLASS (klass), N_PROPERTIES, obj_properties); } /** * pt_waveloader_new: * @uri: (allow-none): URI of the audio file to load * * Returns a new #PtWaveloader. The @uri is not checked on construction, but * calling pt_waveloader_load_async() will fail with an error message. * * After use g_object_unref() it. * * Return value: (transfer full): a new #PtWaveloader */ PtWaveloader * pt_waveloader_new (gchar *uri) { return g_object_new (PT_TYPE_WAVELOADER, "uri", uri, NULL); } parlatype-1.5.4/libparlatype/src/Makefile.in0000644000175000017500000007554713204324034016004 00000000000000# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ @HAVE_INTROSPECTION_TRUE@am__append_1 = Parlatype-1.0.gir subdir = src DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ $(top_srcdir)/depcomp $(parlatype_include_HEADERS) ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_code_coverage.m4 \ $(top_srcdir)/m4/ax_valgrind_check.m4 \ $(top_srcdir)/m4/glibtests.m4 $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(girdir)" \ "$(DESTDIR)$(typelibdir)" "$(DESTDIR)$(parlatype_includedir)" LTLIBRARIES = $(lib_LTLIBRARIES) am__DEPENDENCIES_1 = libparlatype_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) am__objects_1 = pt-resources.lo am_libparlatype_la_OBJECTS = $(am__objects_1) pt-player.lo \ pt-progress-dialog.lo pt-wavedata.lo pt-waveloader.lo \ pt-waveviewer.lo pt-waveviewer-cursor.lo \ pt-waveviewer-focus.lo pt-waveviewer-ruler.lo \ pt-waveviewer-selection.lo pt-waveviewer-waveform.lo libparlatype_la_OBJECTS = $(am_libparlatype_la_OBJECTS) AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) am__v_lt_0 = --silent am__v_lt_1 = libparlatype_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \ $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \ $(AM_CFLAGS) $(CFLAGS) $(libparlatype_la_LDFLAGS) $(LDFLAGS) \ -o $@ AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) AM_V_CC = $(am__v_CC_@AM_V@) am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) am__v_CC_0 = @echo " CC " $@; am__v_CC_1 = CCLD = $(CC) LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CCLD = $(am__v_CCLD_@AM_V@) am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) am__v_CCLD_0 = @echo " CCLD " $@; am__v_CCLD_1 = SOURCES = $(libparlatype_la_SOURCES) DIST_SOURCES = $(libparlatype_la_SOURCES) am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac DATA = $(gir_DATA) $(typelib_DATA) HEADERS = $(parlatype_include_HEADERS) am__extra_recursive_targets = check-valgrind-recursive \ check-valgrind-memcheck-recursive \ check-valgrind-helgrind-recursive check-valgrind-drd-recursive \ check-valgrind-sgcheck-recursive am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ CODE_COVERAGE_CPPFLAGS = @CODE_COVERAGE_CPPFLAGS@ CODE_COVERAGE_CXXFLAGS = @CODE_COVERAGE_CXXFLAGS@ CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ CODE_COVERAGE_LIBS = @CODE_COVERAGE_LIBS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_VALGRIND_drd = @ENABLE_VALGRIND_drd@ ENABLE_VALGRIND_helgrind = @ENABLE_VALGRIND_helgrind@ ENABLE_VALGRIND_memcheck = @ENABLE_VALGRIND_memcheck@ ENABLE_VALGRIND_sgcheck = @ENABLE_VALGRIND_sgcheck@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GCOV = @GCOV@ GENHTML = @GENHTML@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLADE_CATALOG_DIR = @GLADE_CATALOG_DIR@ GLADE_CFLAGS = @GLADE_CFLAGS@ GLADE_LIBS = @GLADE_LIBS@ GLADE_PIXMAP_DIR = @GLADE_PIXMAP_DIR@ GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ GSTREAMER_CFLAGS = @GSTREAMER_CFLAGS@ GSTREAMER_LIBS = @GSTREAMER_LIBS@ GTKDOC_CHECK = @GTKDOC_CHECK@ GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ GTKDOC_REBASE = @GTKDOC_REBASE@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ HTML_DIR = @HTML_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ LCOV = @LCOV@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PARLATYPE_API_VERSION = @PARLATYPE_API_VERSION@ PARLATYPE_SO_VERSION = @PARLATYPE_SO_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VALGRIND = @VALGRIND@ VALGRIND_ENABLED = @VALGRIND_ENABLED@ VERSION = @VERSION@ WARNINGCFLAGS = @WARNINGCFLAGS@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gsettingsschemadir = @gsettingsschemadir@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ installed_test_metadir = @installed_test_metadir@ installed_testdir = @installed_testdir@ intltool__v_merge_options_ = @intltool__v_merge_options_@ intltool__v_merge_options_0 = @intltool__v_merge_options_0@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ valgrind_enabled_tools = @valgrind_enabled_tools@ valgrind_tools = @valgrind_tools@ lib_LTLIBRARIES = libparlatype.la resource_xml = $(srcdir)/resources/libparlatype.gresource.xml resource_files = $(shell glib-compile-resources --sourcedir=$(srcdir)/resources --generate-dependencies $(resource_xml)) BUILT_SOURCES = \ pt-resources.c \ pt-resources.h \ $(NULL) libparlatype_la_SOURCES = \ $(BUILT_SOURCES) \ pt-player.c \ pt-progress-dialog.c \ pt-wavedata.c \ pt-waveloader.c \ pt-waveviewer.c \ pt-waveviewer-cursor.c \ pt-waveviewer-cursor.h \ pt-waveviewer-focus.c \ pt-waveviewer-focus.h \ pt-waveviewer-ruler.c \ pt-waveviewer-ruler.h \ pt-waveviewer-selection.c \ pt-waveviewer-selection.h \ pt-waveviewer-waveform.c \ pt-waveviewer-waveform.h parlatype_includedir = \ $(includedir)/parlatype parlatype_include_HEADERS = \ pt-player.h \ pt-progress-dialog.h \ pt-wavedata.h \ pt-waveloader.h \ pt-waveviewer.h AM_CPPFLAGS = \ $(CODE_COVERAGE_CFLAGS) \ $(WARNINGCFLAGS) \ $(GTK_CFLAGS) \ $(GSTREAMER_CFLAGS) libparlatype_la_LDFLAGS = \ -version-info $(PARLATYPE_SO_VERSION) \ -export-symbols $(top_srcdir)/src/libparlatype.symbols \ -export-dynamic libparlatype_la_LIBADD = \ $(CODE_COVERAGE_LIBS) \ $(GTK_LIBS) \ $(GSTREAMER_LIBS) parlatype_libincludedir = \ $(libdir)/parlatype INTROSPECTION_GIRS = $(am__append_1) INTROSPECTION_SCANNER_ARGS = --add-include-path=$(srcdir) --warn-all --symbol-prefix=pt --identifier-prefix=Pt #--accept-unprefixed INTROSPECTION_COMPILER_ARGS = --includedir=$(srcdir) # introspection sources without built sources, so not using # $(libparlatype_la_SOURCES) @HAVE_INTROSPECTION_TRUE@introspection_sources = \ @HAVE_INTROSPECTION_TRUE@ pt-player.c \ @HAVE_INTROSPECTION_TRUE@ pt-progress-dialog.c \ @HAVE_INTROSPECTION_TRUE@ pt-wavedata.c \ @HAVE_INTROSPECTION_TRUE@ pt-waveloader.c \ @HAVE_INTROSPECTION_TRUE@ pt-waveviewer.c \ @HAVE_INTROSPECTION_TRUE@ $(parlatype_include_HEADERS) @HAVE_INTROSPECTION_TRUE@Parlatype_1_0_gir_INCLUDES = GObject-2.0 Gtk-3.0 @HAVE_INTROSPECTION_TRUE@Parlatype_1_0_gir_CFLAGS = \ @HAVE_INTROSPECTION_TRUE@ -I$(top_srcdir) \ @HAVE_INTROSPECTION_TRUE@ $(INCLUDES) @HAVE_INTROSPECTION_TRUE@Parlatype_1_0_gir_LIBS = libparlatype.la @HAVE_INTROSPECTION_TRUE@Parlatype_1_0_gir_FILES = $(introspection_sources) @HAVE_INTROSPECTION_TRUE@girdir = $(datadir)/gir-1.0 @HAVE_INTROSPECTION_TRUE@gir_DATA = $(INTROSPECTION_GIRS) @HAVE_INTROSPECTION_TRUE@typelibdir = $(libdir)/girepository-1.0 @HAVE_INTROSPECTION_TRUE@typelib_DATA = $(INTROSPECTION_GIRS:.gir=.typelib) @HAVE_INTROSPECTION_TRUE@CLEANFILES = $(gir_DATA) $(typelib_DATA) $(BUILT_SOURCES) EXTRA_DIST = \ $(resource_files) \ $(resource_xml) \ libparlatype.symbols all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign src/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ } uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ done clean-libLTLIBRARIES: -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) @list='$(lib_LTLIBRARIES)'; \ locs=`for p in $$list; do echo $$p; done | \ sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ sort -u`; \ test -z "$$locs" || { \ echo rm -f $${locs}; \ rm -f $${locs}; \ } libparlatype.la: $(libparlatype_la_OBJECTS) $(libparlatype_la_DEPENDENCIES) $(EXTRA_libparlatype_la_DEPENDENCIES) $(AM_V_CCLD)$(libparlatype_la_LINK) -rpath $(libdir) $(libparlatype_la_OBJECTS) $(libparlatype_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pt-player.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pt-progress-dialog.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pt-resources.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pt-wavedata.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pt-waveloader.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pt-waveviewer-cursor.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pt-waveviewer-focus.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pt-waveviewer-ruler.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pt-waveviewer-selection.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pt-waveviewer-waveform.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pt-waveviewer.Plo@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< .c.obj: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-girDATA: $(gir_DATA) @$(NORMAL_INSTALL) @list='$(gir_DATA)'; test -n "$(girdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(girdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(girdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(girdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(girdir)" || exit $$?; \ done uninstall-girDATA: @$(NORMAL_UNINSTALL) @list='$(gir_DATA)'; test -n "$(girdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(girdir)'; $(am__uninstall_files_from_dir) install-typelibDATA: $(typelib_DATA) @$(NORMAL_INSTALL) @list='$(typelib_DATA)'; test -n "$(typelibdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(typelibdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(typelibdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(typelibdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(typelibdir)" || exit $$?; \ done uninstall-typelibDATA: @$(NORMAL_UNINSTALL) @list='$(typelib_DATA)'; test -n "$(typelibdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(typelibdir)'; $(am__uninstall_files_from_dir) install-parlatype_includeHEADERS: $(parlatype_include_HEADERS) @$(NORMAL_INSTALL) @list='$(parlatype_include_HEADERS)'; test -n "$(parlatype_includedir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(parlatype_includedir)'"; \ $(MKDIR_P) "$(DESTDIR)$(parlatype_includedir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(parlatype_includedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(parlatype_includedir)" || exit $$?; \ done uninstall-parlatype_includeHEADERS: @$(NORMAL_UNINSTALL) @list='$(parlatype_include_HEADERS)'; test -n "$(parlatype_includedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(parlatype_includedir)'; $(am__uninstall_files_from_dir) check-valgrind-local: check-valgrind-memcheck-local: check-valgrind-helgrind-local: check-valgrind-drd-local: check-valgrind-sgcheck-local: ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-am TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-am CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-am cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-am all-am: Makefile $(LTLIBRARIES) $(DATA) $(HEADERS) installdirs: for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(girdir)" "$(DESTDIR)$(typelibdir)" "$(DESTDIR)$(parlatype_includedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) check-valgrind: check-valgrind-am check-valgrind-am: check-valgrind-local check-valgrind-drd: check-valgrind-drd-am check-valgrind-drd-am: check-valgrind-drd-local check-valgrind-helgrind: check-valgrind-helgrind-am check-valgrind-helgrind-am: check-valgrind-helgrind-local check-valgrind-memcheck: check-valgrind-memcheck-am check-valgrind-memcheck-am: check-valgrind-memcheck-local check-valgrind-sgcheck: check-valgrind-sgcheck-am check-valgrind-sgcheck-am: check-valgrind-sgcheck-local clean: clean-am clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-girDATA install-parlatype_includeHEADERS \ install-typelibDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-libLTLIBRARIES install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-girDATA uninstall-libLTLIBRARIES \ uninstall-parlatype_includeHEADERS uninstall-typelibDATA .MAKE: all check install install-am install-strip .PHONY: CTAGS GTAGS TAGS all all-am check check-am check-valgrind-am \ check-valgrind-drd-am check-valgrind-drd-local \ check-valgrind-helgrind-am check-valgrind-helgrind-local \ check-valgrind-local check-valgrind-memcheck-am \ check-valgrind-memcheck-local check-valgrind-sgcheck-am \ check-valgrind-sgcheck-local clean clean-generic \ clean-libLTLIBRARIES clean-libtool cscopelist-am ctags \ ctags-am distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-girDATA install-html install-html-am \ install-info install-info-am install-libLTLIBRARIES \ install-man install-parlatype_includeHEADERS install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ install-typelibDATA installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ pdf pdf-am ps ps-am tags tags-am uninstall uninstall-am \ uninstall-girDATA uninstall-libLTLIBRARIES \ uninstall-parlatype_includeHEADERS uninstall-typelibDATA pt-resources.c: $(resource_xml) $(resource_files) $(AM_V_GEN)glib-compile-resources \ --target=$@ \ --sourcedir=$(srcdir)/resources \ --generate-source \ --c-name parlatype $(resource_xml) pt-resources.h: $(resource_xml) $(resource_files) $(AM_V_GEN)glib-compile-resources \ --target=$@ \ --sourcedir=$(srcdir)/resources \ --generate-header \ --c-name parlatype $(resource_xml) #nodist_parlatype_libinclude_HEADERS = xxx.h -include $(INTROSPECTION_MAKEFILE) @HAVE_INTROSPECTION_TRUE@Parlatype-1.0.gir: libparlatype.la # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: parlatype-1.5.4/libparlatype/src/pt-waveviewer-ruler.h0000644000175000017500000000402713200427162020027 00000000000000/* Copyright (C) Gabor Karsay 2017 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #ifndef PT_WAVEVIEWER_RULER_H #define PT_WAVEVIEWER_RULER_H #include G_BEGIN_DECLS #define PT_TYPE_WAVEVIEWER_RULER (pt_waveviewer_ruler_get_type ()) #define PT_WAVEVIEWER_RULER(obj) (G_TYPE_CHECK_INSTANCE_CAST ((obj), PT_TYPE_WAVEVIEWER_RULER, PtWaveviewerRuler)) #define PT_IS_WAVEVIEWER_RULER(obj) (G_TYPE_CHECK_INSTANCE_TYPE ((obj), PT_TYPE_WAVEVIEWER_RULER)) #define PT_WAVEVIEWER_RULER_CLASS(klass) (G_TYPE_CHECK_CLASS_CAST ((klass), PT_TYPE_WAVEVIEWER_RULER, PtWaveviewerRulerClass)) #define PT_IS_WAVEVIEWER_RULER_CLASS(obj) (G_TYPE_CHECK_CLASS_TYPE ((klass), PT_TYPE_WAVEVIEWER_RULER)) typedef struct _PtWaveviewerRuler PtWaveviewerRuler; typedef struct _PtWaveviewerRulerClass PtWaveviewerRulerClass; typedef struct _PtWaveviewerRulerPrivate PtWaveviewerRulerPrivate; struct _PtWaveviewerRuler { GtkDrawingArea parent; /*< private > */ PtWaveviewerRulerPrivate *priv; }; struct _PtWaveviewerRulerClass { GtkDrawingAreaClass klass; }; GType pt_waveviewer_ruler_get_type (void) G_GNUC_CONST; void pt_waveviewer_ruler_set_ruler (PtWaveviewerRuler *self, gint64 n_samples, gint px_per_sec, gint64 duration); GtkWidget *pt_waveviewer_ruler_new (void); G_END_DECLS #endif // PT_WAVEVIEWER_RULER_H parlatype-1.5.4/libparlatype/src/libparlatype.symbols0000644000175000017500000000212513202144431020016 00000000000000pt_player_cancel pt_player_clear_selection pt_player_fast_forward pt_player_get_current_time_string pt_player_get_data pt_player_get_duration pt_player_get_duration_time_string pt_player_get_filename pt_player_get_permille pt_player_get_position pt_player_get_time_string pt_player_get_timestamp pt_player_get_type pt_player_get_uri pt_player_goto_timestamp pt_player_jump_relative pt_player_jump_to_permille pt_player_jump_to_position pt_player_mute_volume pt_player_new pt_player_open_uri pt_player_open_uri_async pt_player_open_uri_finish pt_player_pause pt_player_play pt_player_rewind pt_player_set_selection pt_player_set_speed pt_player_set_volume pt_player_string_is_timestamp pt_progress_dialog_get_type pt_progress_dialog_new pt_progress_dialog_set_progress pt_wavedata_copy pt_wavedata_free pt_wavedata_get_type pt_wavedata_new pt_waveloader_get_data pt_waveloader_get_duration pt_waveloader_get_type pt_waveloader_load_async pt_waveloader_load_finish pt_waveloader_new pt_waveviewer_get_follow_cursor pt_waveviewer_get_type pt_waveviewer_new pt_waveviewer_set_follow_cursor pt_waveviewer_set_wave parlatype-1.5.4/libparlatype/src/pt-waveviewer-selection.h0000644000175000017500000000406213200427162020662 00000000000000/* Copyright (C) Gabor Karsay 2017 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #ifndef PT_WAVEVIEWER_SELECTION_H #define PT_WAVEVIEWER_SELECTION_H #include G_BEGIN_DECLS #define PT_TYPE_WAVEVIEWER_SELECTION (pt_waveviewer_selection_get_type ()) #define PT_WAVEVIEWER_SELECTION(obj) (G_TYPE_CHECK_INSTANCE_CAST ((obj), PT_TYPE_WAVEVIEWER_SELECTION, PtWaveviewerSelection)) #define PT_IS_WAVEVIEWER_SELECTION(obj) (G_TYPE_CHECK_INSTANCE_TYPE ((obj), PT_TYPE_WAVEVIEWER_SELECTION)) #define PT_WAVEVIEWER_SELECTION_CLASS(klass) (G_TYPE_CHECK_CLASS_CAST ((klass), PT_TYPE_WAVEVIEWER_SELECTION, PtWaveviewerSelectionClass)) #define PT_IS_WAVEVIEWER_SELECTION_CLASS(obj) (G_TYPE_CHECK_CLASS_TYPE ((klass), PT_TYPE_WAVEVIEWER_SELECTION)) typedef struct _PtWaveviewerSelection PtWaveviewerSelection; typedef struct _PtWaveviewerSelectionClass PtWaveviewerSelectionClass; typedef struct _PtWaveviewerSelectionPrivate PtWaveviewerSelectionPrivate; struct _PtWaveviewerSelection { GtkDrawingArea parent; /*< private > */ PtWaveviewerSelectionPrivate *priv; }; struct _PtWaveviewerSelectionClass { GtkDrawingAreaClass klass; }; GType pt_waveviewer_selection_get_type (void) G_GNUC_CONST; void pt_waveviewer_selection_set (PtWaveviewerSelection *self, gint start, gint end); GtkWidget *pt_waveviewer_selection_new (void); G_END_DECLS #endif // PT_WAVEVIEWER_SELECTION_H parlatype-1.5.4/libparlatype/src/pt-progress-dialog.c0000644000175000017500000001104213171727132017612 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #include "config.h" #include #define GETTEXT_PACKAGE PACKAGE #include #include "pt-progress-dialog.h" struct _PtProgressDialogPrivate { GtkWidget *progressbar; }; G_DEFINE_TYPE_WITH_PRIVATE (PtProgressDialog, pt_progress_dialog, GTK_TYPE_MESSAGE_DIALOG) /** * SECTION: pt-progress-dialog * @short_description: Progress dialog while loading wave data. * @stability: Unstable * @include: parlatype/pt-progress-dialog.h * * PtProgressDialog is a ready to use dialog, intended to show progress while * loading wave data. Note, that it is supposed to be shown via * gtk_widget_show_all() and loading wave data should be done asynchronously. * Using the synchronous version the dialog will not show up. * * Assuming you have set up a PtPlayer *player, typical usage would be: * |[ * static void * progress_response_cb (GtkWidget *dialog, * gint response, * gpointer *user_data) * { * PtPlayer *player = (PtPlayer *) user_data; * * if (response == GTK_RESPONSE_CANCEL) * pt_player_cancel (player); * } * * ... * * static void * open_cb (PtPlayer *player, * GAsyncResult *res, * gpointer *user_data) * { * PtProgressDialog *dlg = (PtProgressDialog *) user_data; * gtk_widget_destroy (GTK_WIDGET (dlg)); * ... * } * * ... * * progress_dlg = GTK_WIDGET (pt_progress_dialog_new (GTK_WINDOW (parent))); * * g_signal_connect (progress_dlg, * "response", * G_CALLBACK (progress_response_cb), * player); * * g_signal_connect_swapped (player, * "load-progress", * G_CALLBACK (pt_progress_dialog_set_progress), * PT_PROGRESS_DIALOG (progress_dlg)); * * gtk_widget_show_all (win->priv->progress_dlg); * pt_player_open_uri_async (player, * uri, * (GAsyncReadyCallback) open_cb, * progress_dlg); * * ]| */ /** * pt_progress_dialog_set_progress: * @dlg: the dialog * @progress: the new value for the progress bar, ranging from 0.0 to 1.0 * * Sets the progress bar to the new value. */ void pt_progress_dialog_set_progress (PtProgressDialog *dlg, gdouble progress) { g_return_if_fail (PT_IS_PROGRESS_DIALOG (dlg)); g_return_if_fail (progress >= 0 && progress <= 1); gtk_progress_bar_set_fraction (GTK_PROGRESS_BAR (dlg->priv->progressbar), progress); } static void pt_progress_dialog_init (PtProgressDialog *dlg) { dlg->priv = pt_progress_dialog_get_instance_private (dlg); GtkWidget *content; dlg->priv->progressbar = gtk_progress_bar_new (); content = gtk_message_dialog_get_message_area (GTK_MESSAGE_DIALOG (dlg)); gtk_container_add (GTK_CONTAINER (content), dlg->priv->progressbar); } static void pt_progress_dialog_class_init (PtProgressDialogClass *klass) { /* We don't do anything here */ } /** * pt_progress_dialog_new: * @win: (allow-none): parent window, NULL is allowed, but discouraged * * A #GtkMessageDialog with a label "Loading file...", a progress bar and a * cancel button. * * After use gtk_widget_destroy() it. * * Return value: (transfer none): a new #PtProgressDialog */ /* Note on return value: There is a transfer but memory management is done by the user with gtk_widget_destroy() and not automatically by the binding. */ PtProgressDialog * pt_progress_dialog_new (GtkWindow *win) { return g_object_new ( PT_TYPE_PROGRESS_DIALOG, "buttons", GTK_BUTTONS_CANCEL, "message_type", GTK_MESSAGE_OTHER, "text", _("Loading file..."), "modal", TRUE, "transient-for", win, "image", NULL, /* needed for Ubuntu only, property exists on vanilla GTK+ including 3.22, but is not used, Ubuntu's GTK+ patches use it */ NULL); } parlatype-1.5.4/libparlatype/src/pt-waveviewer-ruler.c0000644000175000017500000003034513204247377020040 00000000000000/* Copyright (C) 2017 Gabor Karsay * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #include "config.h" #define GETTEXT_PACKAGE PACKAGE #include #include "pt-waveviewer.h" #include "pt-waveviewer-ruler.h" #define PRIMARY_MARK_HEIGHT 8 #define SECONDARY_MARK_HEIGHT 4 struct _PtWaveviewerRulerPrivate { gboolean rtl; gint64 n_samples; gint px_per_sec; gint64 duration; /* in milliseconds */ GtkAdjustment *adj; /* the parent PtWaveviewer's adjustment */ /* Ruler marks */ gboolean time_format_long; gint time_string_width; gint primary_modulo; gint secondary_modulo; }; G_DEFINE_TYPE_WITH_PRIVATE (PtWaveviewerRuler, pt_waveviewer_ruler, GTK_TYPE_DRAWING_AREA); static gint64 flip_pixel (PtWaveviewerRuler *self, gint64 pixel) { /* In ltr layouts each pixel on the x-axis corresponds to a sample in the array. In rtl layouts this is flipped, e.g. the first pixel corresponds to the last sample in the array. */ gint widget_width; widget_width = gtk_widget_get_allocated_width (GTK_WIDGET (self)); /* Case: waveform is shorter than drawing area */ if (self->priv->n_samples < widget_width) return (widget_width - pixel); else return (self->priv->n_samples - pixel); } static gint64 time_to_pixel (PtWaveviewerRuler *self, gint64 ms) { /* Convert a time in 1/1000 seconds to the closest pixel in the drawing area */ gint64 result; result = ms * self->priv->px_per_sec; result = result / 1000; if (self->priv->rtl) result = flip_pixel (self, result); return result; } static gint64 pixel_to_time (PtWaveviewerRuler *self, gint64 pixel) { /* Convert a position in the drawing area to time in milliseconds */ gint64 result; if (self->priv->rtl) pixel = flip_pixel (self, pixel); result = pixel * 1000; result = result / self->priv->px_per_sec; return result; } static gboolean pt_waveviewer_ruler_draw (GtkWidget *widget, cairo_t *cr) { PtWaveviewerRuler *self = (PtWaveviewerRuler *) widget; gint height = gtk_widget_get_allocated_height (widget); gint i; /* counter, pixel on x-axis in the view */ gint sample; /* sample in the array */ gchar *text; PangoLayout *layout; PangoRectangle rect; gint x_offset; gint64 tmp_time; GtkStyleContext *context; GdkRGBA text_color; gdouble left, right; cairo_clip_extents (cr, &left, NULL, &right, NULL); context = gtk_widget_get_style_context (GTK_WIDGET (self)); gtk_render_background (context, cr, left, 0, right, height); if (self->priv->n_samples == 0) return FALSE; /* ruler marks */ /* Case: secondary ruler marks for tenth seconds. Get time of leftmost pixel, convert it to rounded 10th second, add 10th seconds until we are at the end of the view */ if (self->priv->primary_modulo == 1) { tmp_time = pixel_to_time (self, (int)left) / 100 * 100; if (self->priv->rtl) tmp_time += 100; /* round up */ i = time_to_pixel (self, tmp_time); while (i <= (int)right) { if (tmp_time < self->priv->duration) gtk_render_line (context, cr, i, 0, i, SECONDARY_MARK_HEIGHT); if (self->priv->rtl) tmp_time -= 100; else tmp_time += 100; i = time_to_pixel (self, tmp_time); } } /* Case: secondary ruler marks for full seconds. Use secondary_modulo. */ if (self->priv->primary_modulo > 1) { for (i = (int)left; i <= (int)right; i += 1) { sample = i; if (self->priv->rtl) sample = flip_pixel (self, sample); if (sample > self->priv->n_samples) continue; if (sample % (self->priv->px_per_sec * self->priv->secondary_modulo) == 0) gtk_render_line (context, cr, i, 0, i, SECONDARY_MARK_HEIGHT); } } /* Primary marks and time strings Add some padding to show time strings (time_string_width) */ gtk_style_context_get_color (context, gtk_style_context_get_state (context), &text_color); gdk_cairo_set_source_rgba (cr, &text_color); for (i = (int)left - self->priv->time_string_width; i <= (int)right + self->priv->time_string_width; i += 1) { sample = i; if (self->priv->rtl) sample = flip_pixel (self, sample); if (sample < 0 || sample > self->priv->n_samples) continue; if (sample % (self->priv->px_per_sec * self->priv->primary_modulo) == 0) { gtk_render_line (context, cr, i, 0, i, PRIMARY_MARK_HEIGHT); if (self->priv->time_format_long) { text = g_strdup_printf (C_("long time format", "%d:%02d:%02d"), sample/self->priv->px_per_sec / 3600, (sample/self->priv->px_per_sec % 3600) / 60, sample/self->priv->px_per_sec % 60); } else { text = g_strdup_printf (C_("shortest time format", "%d:%02d"), sample/self->priv->px_per_sec/60, sample/self->priv->px_per_sec % 60); } layout = gtk_widget_create_pango_layout (GTK_WIDGET (self), text); pango_cairo_update_layout (cr, layout); /* display timestring only if it is fully visible in drawing area */ pango_layout_get_pixel_extents (layout, &rect, NULL); x_offset = (rect.x + rect.width) / 2; if (i - x_offset > 0 && i + x_offset < gtk_widget_get_allocated_width (widget)) { cairo_move_to (cr, i - x_offset, /* center at mark */ height - rect.y - rect.height -3); /* +3 px above border */ pango_cairo_show_layout (cr, layout); } g_free (text); g_object_unref (layout); } } return FALSE; } static void calculate_height (PtWaveviewerRuler *self) { /* Calculate ruler height and time string width*/ cairo_t *cr; cairo_surface_t *surface; PangoLayout *layout; PangoRectangle rect; gchar *time_format; gint ruler_height; GdkWindow *window = NULL; window = gtk_widget_get_parent_window (GTK_WIDGET (self)); if (!window || self->priv->n_samples == 0) { gtk_widget_set_size_request (GTK_WIDGET (self), 0, 0); return; } surface = gdk_window_create_similar_surface (window, CAIRO_CONTENT_COLOR, 100, 100); cr = cairo_create (surface); self->priv->time_format_long = (self->priv->n_samples / self->priv->px_per_sec >= 3600); if (self->priv->time_format_long) time_format = g_strdup_printf (C_("long time format", "%d:%02d:%02d"), 88, 0, 0); else time_format = g_strdup_printf (C_("shortest time format", "%d:%02d"), 88, 0); layout = gtk_widget_create_pango_layout (GTK_WIDGET (self), time_format); pango_cairo_update_layout (cr, layout); pango_layout_get_pixel_extents (layout, &rect, NULL); /* Ruler height = font height + 3px padding below + 3px padding above + 5px for marks */ ruler_height = rect.y + rect.height + 3 + 3 + 5; /* Does the time string fit into 1 second? Define primary and secondary modulo (for primary and secondary marks */ self->priv->time_string_width = rect.x + rect.width; if (self->priv->time_string_width < self->priv->px_per_sec) { self->priv->primary_modulo = 1; /* In fact this would be 0.1, it's handled later as a special case */ self->priv->secondary_modulo = 1; } else if (self->priv->time_string_width < self->priv->px_per_sec * 5) { self->priv->primary_modulo = 5; self->priv->secondary_modulo = 1; } else if (self->priv->time_string_width < self->priv->px_per_sec * 10) { self->priv->primary_modulo = 10; self->priv->secondary_modulo = 1; } else if (self->priv->time_string_width < self->priv->px_per_sec * 60) { self->priv->primary_modulo = 60; self->priv->secondary_modulo = 10; } else if (self->priv->time_string_width < self->priv->px_per_sec * 300) { self->priv->primary_modulo = 300; self->priv->secondary_modulo = 60; } else if (self->priv->time_string_width < self->priv->px_per_sec * 600) { self->priv->primary_modulo = 600; self->priv->secondary_modulo = 60; } else { self->priv->primary_modulo = 3600; self->priv->secondary_modulo = 600; } g_free (time_format); g_object_unref (layout); cairo_destroy (cr); cairo_surface_destroy (surface); gtk_widget_set_size_request (GTK_WIDGET (self), self->priv->n_samples, ruler_height); } static void update_cached_style_values (PtWaveviewerRuler *self) { /* Direction is cached */ GtkStyleContext *context; GdkWindow *window = NULL; window = gtk_widget_get_parent_window (GTK_WIDGET (self)); if (!window) return; context = gtk_widget_get_style_context (GTK_WIDGET (self)); if (gtk_style_context_get_state (context) & GTK_STATE_FLAG_DIR_RTL) self->priv->rtl = TRUE; else self->priv->rtl = FALSE; } static void pt_waveviewer_ruler_state_flags_changed (GtkWidget *widget, GtkStateFlags flags) { update_cached_style_values (PT_WAVEVIEWER_RULER (widget)); GTK_WIDGET_CLASS (pt_waveviewer_ruler_parent_class)->state_flags_changed (widget, flags); } static void pt_waveviewer_ruler_style_updated (GtkWidget *widget) { PtWaveviewerRuler *self = PT_WAVEVIEWER_RULER (widget); GTK_WIDGET_CLASS (pt_waveviewer_ruler_parent_class)->style_updated (widget); calculate_height (self); update_cached_style_values (self); gtk_widget_queue_draw (widget); } static void pt_waveviewer_ruler_realize (GtkWidget *widget) { GTK_WIDGET_CLASS (pt_waveviewer_ruler_parent_class)->realize (widget); update_cached_style_values (PT_WAVEVIEWER_RULER (widget)); } static void adj_value_changed (GtkAdjustment *adj, gpointer data) { PtWaveviewerRuler *self = PT_WAVEVIEWER_RULER (data); gint height, width, left; height = gtk_widget_get_allocated_height (GTK_WIDGET (self)); width = (gint) gtk_adjustment_get_page_size (self->priv->adj); left = (gint) gtk_adjustment_get_value (self->priv->adj); gtk_widget_queue_draw_area (GTK_WIDGET (self), left, 0, width, height); } static void pt_waveviewer_ruler_hierarchy_changed (GtkWidget *widget, GtkWidget *old_parent) { PtWaveviewerRuler *self = PT_WAVEVIEWER_RULER (widget); if (self->priv->adj) return; /* Get parent's GtkAdjustment */ GtkWidget *parent = NULL; parent = gtk_widget_get_ancestor (widget, PT_TYPE_WAVEVIEWER); if (parent) { self->priv->adj = gtk_scrolled_window_get_hadjustment (GTK_SCROLLED_WINDOW (parent)); g_signal_connect (self->priv->adj, "value-changed", G_CALLBACK (adj_value_changed), self); } } void pt_waveviewer_ruler_set_ruler (PtWaveviewerRuler *self, gint64 n_samples, gint px_per_sec, gint64 duration) { self->priv->n_samples = n_samples; self->priv->px_per_sec = px_per_sec; self->priv->duration = duration; calculate_height (self); update_cached_style_values (self); gtk_widget_queue_draw (GTK_WIDGET (self)); } static void pt_waveviewer_ruler_init (PtWaveviewerRuler *self) { self->priv = pt_waveviewer_ruler_get_instance_private (self); GtkStyleContext *context; self->priv->n_samples = 0; self->priv->px_per_sec = 0; self->priv->duration = 0; self->priv->adj = NULL; gtk_widget_set_name (GTK_WIDGET (self), "ruler"); context = gtk_widget_get_style_context (GTK_WIDGET (self)); gtk_style_context_add_class (context, GTK_STYLE_CLASS_MARK); } static void pt_waveviewer_ruler_class_init (PtWaveviewerRulerClass *klass) { GtkWidgetClass *widget_class = GTK_WIDGET_CLASS (klass); widget_class->draw = pt_waveviewer_ruler_draw; widget_class->hierarchy_changed = pt_waveviewer_ruler_hierarchy_changed; widget_class->realize = pt_waveviewer_ruler_realize; widget_class->state_flags_changed = pt_waveviewer_ruler_state_flags_changed; widget_class->style_updated = pt_waveviewer_ruler_style_updated; } GtkWidget * pt_waveviewer_ruler_new (void) { return GTK_WIDGET (g_object_new (PT_TYPE_WAVEVIEWER_RULER, NULL)); } parlatype-1.5.4/libparlatype/src/pt-resources.c0000644000175000017500000001744713204122210016521 00000000000000#include #if defined (__ELF__) && ( __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 6)) # define SECTION __attribute__ ((section (".gresource.parlatype"), aligned (8))) #else # define SECTION #endif static const SECTION union { const guint8 data[604]; const double alignment; void * const ptr;} parlatype_resource_data = { { 0x47, 0x56, 0x61, 0x72, 0x69, 0x61, 0x6e, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0xc8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x94, 0x5d, 0xdc, 0x97, 0x03, 0x00, 0x00, 0x00, 0xc8, 0x00, 0x00, 0x00, 0x07, 0x00, 0x4c, 0x00, 0xd0, 0x00, 0x00, 0x00, 0xd4, 0x00, 0x00, 0x00, 0x35, 0xc7, 0x82, 0x66, 0x00, 0x00, 0x00, 0x00, 0xd4, 0x00, 0x00, 0x00, 0x08, 0x00, 0x4c, 0x00, 0xdc, 0x00, 0x00, 0x00, 0xe0, 0x00, 0x00, 0x00, 0xd4, 0xb5, 0x02, 0x00, 0xff, 0xff, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x00, 0x01, 0x00, 0x4c, 0x00, 0xe4, 0x00, 0x00, 0x00, 0xe8, 0x00, 0x00, 0x00, 0xc2, 0xaf, 0x89, 0x0b, 0x02, 0x00, 0x00, 0x00, 0xe8, 0x00, 0x00, 0x00, 0x04, 0x00, 0x4c, 0x00, 0xec, 0x00, 0x00, 0x00, 0xf0, 0x00, 0x00, 0x00, 0xba, 0x19, 0x01, 0x80, 0x05, 0x00, 0x00, 0x00, 0xf0, 0x00, 0x00, 0x00, 0x11, 0x00, 0x76, 0x00, 0x08, 0x01, 0x00, 0x00, 0x48, 0x02, 0x00, 0x00, 0xcd, 0x47, 0xa5, 0xb9, 0x01, 0x00, 0x00, 0x00, 0x48, 0x02, 0x00, 0x00, 0x0d, 0x00, 0x4c, 0x00, 0x58, 0x02, 0x00, 0x00, 0x5c, 0x02, 0x00, 0x00, 0x67, 0x69, 0x74, 0x68, 0x75, 0x62, 0x2f, 0x00, 0x01, 0x00, 0x00, 0x00, 0x67, 0x6b, 0x61, 0x72, 0x73, 0x61, 0x79, 0x2f, 0x05, 0x00, 0x00, 0x00, 0x2f, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x63, 0x6f, 0x6d, 0x2f, 0x00, 0x00, 0x00, 0x00, 0x70, 0x74, 0x2d, 0x77, 0x61, 0x76, 0x65, 0x76, 0x69, 0x65, 0x77, 0x65, 0x72, 0x2e, 0x63, 0x73, 0x73, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x2f, 0x2a, 0x20, 0x63, 0x75, 0x73, 0x74, 0x6f, 0x6d, 0x20, 0x73, 0x74, 0x79, 0x6c, 0x65, 0x73, 0x20, 0x66, 0x6f, 0x72, 0x20, 0x50, 0x74, 0x57, 0x61, 0x76, 0x65, 0x76, 0x69, 0x65, 0x77, 0x65, 0x72, 0x20, 0x2a, 0x2f, 0x0a, 0x0a, 0x2e, 0x63, 0x75, 0x72, 0x73, 0x6f, 0x72, 0x20, 0x7b, 0x0a, 0x09, 0x63, 0x6f, 0x6c, 0x6f, 0x72, 0x3a, 0x20, 0x23, 0x63, 0x63, 0x30, 0x30, 0x30, 0x30, 0x3b, 0x0a, 0x7d, 0x0a, 0x0a, 0x2e, 0x63, 0x75, 0x72, 0x73, 0x6f, 0x72, 0x3a, 0x62, 0x61, 0x63, 0x6b, 0x64, 0x72, 0x6f, 0x70, 0x20, 0x7b, 0x0a, 0x09, 0x63, 0x6f, 0x6c, 0x6f, 0x72, 0x3a, 0x20, 0x23, 0x63, 0x63, 0x36, 0x30, 0x36, 0x30, 0x3b, 0x0a, 0x7d, 0x0a, 0x0a, 0x2e, 0x73, 0x65, 0x6c, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x20, 0x7b, 0x0a, 0x09, 0x63, 0x6f, 0x6c, 0x6f, 0x72, 0x3a, 0x20, 0x72, 0x67, 0x62, 0x61, 0x28, 0x39, 0x30, 0x25, 0x2c, 0x35, 0x30, 0x25, 0x2c, 0x35, 0x30, 0x25, 0x2c, 0x30, 0x2e, 0x35, 0x29, 0x3b, 0x0a, 0x7d, 0x0a, 0x0a, 0x73, 0x63, 0x72, 0x6f, 0x6c, 0x6c, 0x65, 0x64, 0x77, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x20, 0x75, 0x6e, 0x64, 0x65, 0x72, 0x73, 0x68, 0x6f, 0x6f, 0x74, 0x2e, 0x6c, 0x65, 0x66, 0x74, 0x2c, 0x0a, 0x73, 0x63, 0x72, 0x6f, 0x6c, 0x6c, 0x65, 0x64, 0x77, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x20, 0x75, 0x6e, 0x64, 0x65, 0x72, 0x73, 0x68, 0x6f, 0x6f, 0x74, 0x2e, 0x72, 0x69, 0x67, 0x68, 0x74, 0x2c, 0x0a, 0x73, 0x63, 0x72, 0x6f, 0x6c, 0x6c, 0x65, 0x64, 0x77, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x20, 0x6f, 0x76, 0x65, 0x72, 0x73, 0x68, 0x6f, 0x6f, 0x74, 0x2e, 0x6c, 0x65, 0x66, 0x74, 0x2c, 0x0a, 0x73, 0x63, 0x72, 0x6f, 0x6c, 0x6c, 0x65, 0x64, 0x77, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x20, 0x6f, 0x76, 0x65, 0x72, 0x73, 0x68, 0x6f, 0x6f, 0x74, 0x2e, 0x72, 0x69, 0x67, 0x68, 0x74, 0x20, 0x7b, 0x0a, 0x09, 0x62, 0x61, 0x63, 0x6b, 0x67, 0x72, 0x6f, 0x75, 0x6e, 0x64, 0x3a, 0x20, 0x6e, 0x6f, 0x6e, 0x65, 0x3b, 0x0a, 0x7d, 0x0a, 0x00, 0x00, 0x28, 0x75, 0x75, 0x61, 0x79, 0x29, 0x6c, 0x69, 0x62, 0x70, 0x61, 0x72, 0x6c, 0x61, 0x74, 0x79, 0x70, 0x65, 0x2f, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00 } }; static GStaticResource static_resource = { parlatype_resource_data.data, sizeof (parlatype_resource_data.data), NULL, NULL, NULL }; extern GResource *parlatype_get_resource (void); GResource *parlatype_get_resource (void) { return g_static_resource_get_resource (&static_resource); } /* If G_HAS_CONSTRUCTORS is true then the compiler support *both* constructors and destructors, in a sane way, including e.g. on library unload. If not you're on your own. Some compilers need #pragma to handle this, which does not work with macros, so the way you need to use this is (for constructors): #ifdef G_DEFINE_CONSTRUCTOR_NEEDS_PRAGMA #pragma G_DEFINE_CONSTRUCTOR_PRAGMA_ARGS(my_constructor) #endif G_DEFINE_CONSTRUCTOR(my_constructor) static void my_constructor(void) { ... } */ #if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 7) #define G_HAS_CONSTRUCTORS 1 #define G_DEFINE_CONSTRUCTOR(_func) static void __attribute__((constructor)) _func (void); #define G_DEFINE_DESTRUCTOR(_func) static void __attribute__((destructor)) _func (void); #elif defined (_MSC_VER) && (_MSC_VER >= 1500) /* Visual studio 2008 and later has _Pragma */ #define G_HAS_CONSTRUCTORS 1 #define G_DEFINE_CONSTRUCTOR(_func) \ static void _func(void); \ static int _func ## _wrapper(void) { _func(); return 0; } \ __pragma(section(".CRT$XCU",read)) \ __declspec(allocate(".CRT$XCU")) static int (* _array ## _func)(void) = _func ## _wrapper; #define G_DEFINE_DESTRUCTOR(_func) \ static void _func(void); \ static int _func ## _constructor(void) { atexit (_func); return 0; } \ __pragma(section(".CRT$XCU",read)) \ __declspec(allocate(".CRT$XCU")) static int (* _array ## _func)(void) = _func ## _constructor; #elif defined (_MSC_VER) #define G_HAS_CONSTRUCTORS 1 /* Pre Visual studio 2008 must use #pragma section */ #define G_DEFINE_CONSTRUCTOR_NEEDS_PRAGMA 1 #define G_DEFINE_DESTRUCTOR_NEEDS_PRAGMA 1 #define G_DEFINE_CONSTRUCTOR_PRAGMA_ARGS(_func) \ section(".CRT$XCU",read) #define G_DEFINE_CONSTRUCTOR(_func) \ static void _func(void); \ static int _func ## _wrapper(void) { _func(); return 0; } \ __declspec(allocate(".CRT$XCU")) static int (*p)(void) = _func ## _wrapper; #define G_DEFINE_DESTRUCTOR_PRAGMA_ARGS(_func) \ section(".CRT$XCU",read) #define G_DEFINE_DESTRUCTOR(_func) \ static void _func(void); \ static int _func ## _constructor(void) { atexit (_func); return 0; } \ __declspec(allocate(".CRT$XCU")) static int (* _array ## _func)(void) = _func ## _constructor; #elif defined(__SUNPRO_C) /* This is not tested, but i believe it should work, based on: * http://opensource.apple.com/source/OpenSSL098/OpenSSL098-35/src/fips/fips_premain.c */ #define G_HAS_CONSTRUCTORS 1 #define G_DEFINE_CONSTRUCTOR_NEEDS_PRAGMA 1 #define G_DEFINE_DESTRUCTOR_NEEDS_PRAGMA 1 #define G_DEFINE_CONSTRUCTOR_PRAGMA_ARGS(_func) \ init(_func) #define G_DEFINE_CONSTRUCTOR(_func) \ static void _func(void); #define G_DEFINE_DESTRUCTOR_PRAGMA_ARGS(_func) \ fini(_func) #define G_DEFINE_DESTRUCTOR(_func) \ static void _func(void); #else /* constructors not supported for this compiler */ #endif #ifdef G_HAS_CONSTRUCTORS #ifdef G_DEFINE_CONSTRUCTOR_NEEDS_PRAGMA #pragma G_DEFINE_CONSTRUCTOR_PRAGMA_ARGS(resource_constructor) #endif G_DEFINE_CONSTRUCTOR(resource_constructor) #ifdef G_DEFINE_DESTRUCTOR_NEEDS_PRAGMA #pragma G_DEFINE_DESTRUCTOR_PRAGMA_ARGS(resource_destructor) #endif G_DEFINE_DESTRUCTOR(resource_destructor) #else #warning "Constructor not supported on this compiler, linking in resources will not work" #endif static void resource_constructor (void) { g_static_resource_init (&static_resource); } static void resource_destructor (void) { g_static_resource_fini (&static_resource); } parlatype-1.5.4/libparlatype/src/pt-waveloader.h0000644000175000017500000000372113176574165016667 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #ifndef PT_WAVELOADER_H #define PT_WAVELOADER_H #include #include "pt-wavedata.h" #define PT_TYPE_WAVELOADER (pt_waveloader_get_type()) #define PT_WAVELOADER(obj) (G_TYPE_CHECK_INSTANCE_CAST((obj), PT_TYPE_WAVELOADER, PtWaveloader)) #define PT_IS_WAVELOADER(obj) (G_TYPE_CHECK_INSTANCE_TYPE ((obj), PT_TYPE_WAVELOADER)) typedef struct _PtWaveloader PtWaveloader; typedef struct _PtWaveloaderClass PtWaveloaderClass; typedef struct _PtWaveloaderPrivate PtWaveloaderPrivate; /** * PtWaveloader: * * The #PtWaveloader contains only private fields and should not be directly accessed. */ struct _PtWaveloader { GObject parent; /*< private > */ PtWaveloaderPrivate *priv; }; struct _PtWaveloaderClass { GObjectClass parent_class; }; GType pt_waveloader_get_type (void) G_GNUC_CONST; gboolean pt_waveloader_load_finish (PtWaveloader *wl, GAsyncResult *result, GError **error); void pt_waveloader_load_async (PtWaveloader *wl, GCancellable *cancellable, GAsyncReadyCallback callback, gpointer user_data); gint64 pt_waveloader_get_duration (PtWaveloader *wl); PtWavedata* pt_waveloader_get_data (PtWaveloader *wl, gint pps); PtWaveloader* pt_waveloader_new (gchar *uri); #endif parlatype-1.5.4/libparlatype/src/pt-waveviewer.c0000644000175000017500000010343113202143641016671 00000000000000/* Copyright (C) 2006-2008 Buzztrax team * Copyright (C) 2002 2003 2004 2005 2007 2008 2009 2010, Magnus Hjorth * Copyright (C) 2016 Gabor Karsay * * Original source name waveform-viewer.c, taken from Buzztrax and heavily * modified. Original source licenced under LGPL 2 or later. * * Small bits of selection stuff taken from mhWaveEdit 1.4.23 (Magnus Hjorth) * in files src/chunkview.c and src/document.c. Original source licenced under * GPL 2 or later. * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #include "config.h" #include /* fabs */ #include #define GETTEXT_PACKAGE PACKAGE #include #include "pt-waveviewer-ruler.h" #include "pt-waveviewer-waveform.h" #include "pt-waveviewer-selection.h" #include "pt-waveviewer-cursor.h" #include "pt-waveviewer-focus.h" #include "pt-waveviewer.h" #define ALL_ACCELS_MASK (GDK_CONTROL_MASK | GDK_SHIFT_MASK | GDK_MOD1_MASK) #define CURSOR_POSITION 0.5 #define WAVE_MIN_HEIGHT 20 struct _PtWaveviewerPrivate { /* Wavedata */ gfloat *peaks; gint64 peaks_size; /* size of array */ gint px_per_sec; gint64 duration; /* in milliseconds */ /* Properties */ gint64 playback_cursor; gboolean follow_cursor; gboolean fixed_cursor; gboolean show_ruler; gboolean has_selection; /* Selections, in milliseconds */ gint64 sel_start; gint64 sel_end; gint64 dragstart; gint64 dragend; GdkCursor *arrows; GtkAdjustment *adj; gboolean rtl; gboolean focus_on_cursor; /* Subwidgets */ GtkWidget *waveform; GtkWidget *revealer; GtkWidget *ruler; GtkWidget *focus; GtkWidget *cursor; GtkWidget *selection; }; enum { PROP_0, PROP_PLAYBACK_CURSOR, PROP_FOLLOW_CURSOR, PROP_FIXED_CURSOR, PROP_SHOW_RULER, PROP_HAS_SELECTION, PROP_SELECTION_START, PROP_SELECTION_END, N_PROPERTIES }; enum { CURSOR_CHANGED, SELECTION_CHANGED, PLAY_TOGGLED, LAST_SIGNAL }; static GParamSpec *obj_properties[N_PROPERTIES] = { NULL, }; static guint signals[LAST_SIGNAL] = { 0 }; G_DEFINE_TYPE_WITH_PRIVATE (PtWaveviewer, pt_waveviewer, GTK_TYPE_SCROLLED_WINDOW); /** * SECTION: pt-waveviewer * @short_description: A GtkWidget to display a waveform. * @stability: Unstable * @include: parlatype/pt-waveviewer.h * * Displays a waveform provided by #PtPlayer or #PtWaveloader. */ static gint64 flip_pixel (PtWaveviewer *self, gint64 pixel) { /* In ltr layouts each pixel on the x-axis corresponds to a sample in the array. In rtl layouts this is flipped, e.g. the first pixel corresponds to the last sample in the array. */ gint64 samples; gint widget_width; samples = self->priv->peaks_size / 2; widget_width = gtk_widget_get_allocated_width (self->priv->waveform); /* Case: waveform is shorter than drawing area */ if (samples < widget_width) return (widget_width - pixel); else return (samples - pixel); } static gint64 time_to_pixel (PtWaveviewer *self, gint64 ms) { /* Convert a time in 1/1000 seconds to the closest pixel in the drawing area */ gint64 result; result = ms * self->priv->px_per_sec; result = result / 1000; if (self->priv->rtl) result = flip_pixel (self, result); return result; } static gint64 pixel_to_time (PtWaveviewer *self, gint64 pixel) { /* Convert a position in the drawing area to time in milliseconds */ gint64 result; if (self->priv->rtl) pixel = flip_pixel (self, pixel); result = pixel * 1000; result = result / self->priv->px_per_sec; return result; } static void scroll_to_cursor (PtWaveviewer *self) { gint cursor_pos; gint first_visible; gint last_visible; gint page_width; gint offset; cursor_pos = time_to_pixel (self, self->priv->playback_cursor); first_visible = (gint) gtk_adjustment_get_value (self->priv->adj); page_width = (gint) gtk_adjustment_get_page_size (self->priv->adj); last_visible = first_visible + page_width; /* Fixed cursor: always scroll, non-fixed cursor: only scroll if cursor is not visible */ if (self->priv->fixed_cursor) { offset = page_width * CURSOR_POSITION; gtk_adjustment_set_value (self->priv->adj, cursor_pos - offset); } else { if (cursor_pos < first_visible || cursor_pos > last_visible) { if (self->priv->rtl) /* cursor visible far right */ gtk_adjustment_set_value (self->priv->adj, cursor_pos - page_width); else /* cursor visible far left */ gtk_adjustment_set_value (self->priv->adj, cursor_pos); } } } static gint64 calculate_duration (PtWaveviewer *self) { gint64 result; gint64 samples; gint one_pixel; one_pixel = 1000 / self->priv->px_per_sec; samples = self->priv->peaks_size / 2; result = samples / self->priv->px_per_sec * 1000; /* = full seconds */ result += (samples % self->priv->px_per_sec) * one_pixel; return result; } static gint64 add_subtract_time (PtWaveviewer *self, gint pixel, gboolean stay_in_selection) { /* add time to the cursor's time so that the cursor is moved x pixels */ gint64 result; gint one_pixel; one_pixel = 1000 / self->priv->px_per_sec; if (self->priv->rtl) one_pixel = one_pixel * -1; result = self->priv->playback_cursor + pixel * one_pixel; /* Return result in range */ if (stay_in_selection) return CLAMP (result, self->priv->sel_start, self->priv->sel_end); else return CLAMP (result, 0, self->priv->duration); } static void update_selection (PtWaveviewer *self) { /* Check if drag positions are different from selection. If yes, set new selection, emit signals and redraw widget. */ gboolean changed = FALSE; PtWaveviewerSelection *sel_widget = PT_WAVEVIEWER_SELECTION (self->priv->selection); /* Is anything selected at all? */ if (self->priv->dragstart == self->priv->dragend) { self->priv->sel_start = 0; self->priv->sel_end = 0; if (self->priv->has_selection) { self->priv->has_selection = FALSE; g_object_notify_by_pspec (G_OBJECT (self), obj_properties[PROP_HAS_SELECTION]); g_signal_emit_by_name (self, "selection-changed"); pt_waveviewer_selection_set (sel_widget, 0, 0); } return; } /* Don't select too much */ self->priv->dragstart = CLAMP (self->priv->dragstart, 0, self->priv->duration); self->priv->dragend = CLAMP (self->priv->dragend, 0, self->priv->duration); /* Sort start/end, check for changes (no changes on vertical movement), update selection */ if (self->priv->dragstart < self->priv->dragend) { if (self->priv->sel_start != self->priv->dragstart || self->priv->sel_end != self->priv->dragend) { self->priv->sel_start = self->priv->dragstart; self->priv->sel_end = self->priv->dragend; changed = TRUE; } } else { if (self->priv->sel_start != self->priv->dragend || self->priv->sel_end != self->priv->dragstart) { self->priv->sel_start = self->priv->dragend; self->priv->sel_end = self->priv->dragstart; changed = TRUE; } } if (changed) { /* Update has-selection property */ if (!self->priv->has_selection) { self->priv->has_selection = TRUE; g_object_notify_by_pspec (G_OBJECT (self), obj_properties[PROP_HAS_SELECTION]); } g_signal_emit_by_name (self, "selection-changed"); pt_waveviewer_selection_set (sel_widget, time_to_pixel (self, self->priv->sel_start), time_to_pixel (self, self->priv->sel_end)); } } static gboolean pt_waveviewer_key_press_event (GtkWidget *widget, GdkEventKey *event) { PtWaveviewer *self = PT_WAVEVIEWER (widget); gdouble step; gdouble page; gdouble value; gdouble upper; if (event->type != GDK_KEY_PRESS) return FALSE; if (!self->priv->peaks) return FALSE; /* no modifier pressed */ if (!(event->state & ALL_ACCELS_MASK)) { switch (event->keyval) { case GDK_KEY_Escape: self->priv->dragstart = self->priv->dragend = 0; update_selection (self); return TRUE; case GDK_KEY_space: g_signal_emit_by_name (self, "play-toggled"); return TRUE; } } if (self->priv->focus_on_cursor) { /* no modifier pressed */ if (!(event->state & ALL_ACCELS_MASK)) { switch (event->keyval) { case GDK_KEY_Left: g_signal_emit_by_name (self, "cursor-changed", add_subtract_time (self, -2, FALSE)); return TRUE; case GDK_KEY_Right: g_signal_emit_by_name (self, "cursor-changed", add_subtract_time (self, 2, FALSE)); return TRUE; case GDK_KEY_Page_Up: g_signal_emit_by_name (self, "cursor-changed", add_subtract_time (self, -20, FALSE)); return TRUE; case GDK_KEY_Page_Down: g_signal_emit_by_name (self, "cursor-changed", add_subtract_time (self, 20, FALSE)); return TRUE; case GDK_KEY_Home: g_signal_emit_by_name (self, "cursor-changed", 0); return TRUE; case GDK_KEY_End: g_signal_emit_by_name (self, "cursor-changed", self->priv->duration); return TRUE; } } /* Only Control is pressed, not together with Shift or Alt Here we override the default horizontal scroll bindings */ else if ((event->state & ALL_ACCELS_MASK) == GDK_CONTROL_MASK) { switch (event->keyval) { case GDK_KEY_Left: g_signal_emit_by_name (self, "cursor-changed", add_subtract_time (self, -2, TRUE)); return TRUE; case GDK_KEY_Right: g_signal_emit_by_name (self, "cursor-changed", add_subtract_time (self, 2, TRUE)); return TRUE; case GDK_KEY_Page_Up: g_signal_emit_by_name (self, "cursor-changed", add_subtract_time (self, -20, TRUE)); return TRUE; case GDK_KEY_Page_Down: g_signal_emit_by_name (self, "cursor-changed", add_subtract_time (self, 20, TRUE)); return TRUE; case GDK_KEY_Home: g_signal_emit_by_name (self, "cursor-changed", self->priv->sel_start); return TRUE; case GDK_KEY_End: g_signal_emit_by_name (self, "cursor-changed", self->priv->sel_end); return TRUE; } } } else { /* no modifier pressed */ if (!(event->state & ALL_ACCELS_MASK)) { step = gtk_adjustment_get_step_increment (self->priv->adj); page = gtk_adjustment_get_page_increment (self->priv->adj); value = gtk_adjustment_get_value (self->priv->adj); upper = gtk_adjustment_get_upper (self->priv->adj); /* We scroll ourselves because we want to do it without modifier, however it's not as smooth as the "real" scrolling */ switch (event->keyval) { case GDK_KEY_Left: gtk_adjustment_set_value (self->priv->adj, value - step); pt_waveviewer_set_follow_cursor (self, FALSE); return TRUE; case GDK_KEY_Right: gtk_adjustment_set_value (self->priv->adj, value + step); pt_waveviewer_set_follow_cursor (self, FALSE); return TRUE; case GDK_KEY_Page_Up: gtk_adjustment_set_value (self->priv->adj, value - page); pt_waveviewer_set_follow_cursor (self, FALSE); return TRUE; case GDK_KEY_Page_Down: gtk_adjustment_set_value (self->priv->adj, value + page); pt_waveviewer_set_follow_cursor (self, FALSE); return TRUE; case GDK_KEY_Home: if (self->priv->rtl) gtk_adjustment_set_value (self->priv->adj, upper); else gtk_adjustment_set_value (self->priv->adj, 0); pt_waveviewer_set_follow_cursor (self, FALSE); return TRUE; case GDK_KEY_End: if (self->priv->rtl) gtk_adjustment_set_value (self->priv->adj, 0); else gtk_adjustment_set_value (self->priv->adj, upper); pt_waveviewer_set_follow_cursor (self, FALSE); return TRUE; } } } return FALSE; } static gboolean pointer_in_range (PtWaveviewer *self, gdouble pointer, gint64 pos) { /* Returns TRUE if @pointer (event->x) is not more than 3 pixels away from @pos */ return (fabs (pointer - (double) time_to_pixel (self, pos)) < 3.0); } static void set_cursor (GtkWidget *widget, GdkCursor *cursor) { GdkWindow *gdkwin; gdkwin = gtk_widget_get_window (widget); gdk_window_set_cursor (gdkwin, cursor); } static gboolean pt_waveviewer_button_press_event (GtkWidget *widget, GdkEventButton *event) { PtWaveviewer *self = PT_WAVEVIEWER (widget); if (!self->priv->peaks) return FALSE; gint64 clicked; /* the sample clicked on */ gint64 pos; /* clicked sample's position in milliseconds */ clicked = (gint) event->x; pos = pixel_to_time (self, clicked); /* Single left click, no other keys pressed: new selection or changing selection */ if (event->type == GDK_BUTTON_PRESS && event->button == GDK_BUTTON_PRIMARY && !(event->state & ALL_ACCELS_MASK)) { /* set position as start and end point, for new selection */ self->priv->dragstart = self->priv->dragend = pos; /* if over selection border: snap to selection border, changing selection */ if (pointer_in_range (self, event->x, self->priv->sel_start)) { self->priv->dragstart = self->priv->sel_end; self->priv->dragend = self->priv->sel_start; } else if (pointer_in_range (self, event->x, self->priv->sel_end)) { self->priv->dragstart = self->priv->sel_start; self->priv->dragend = self->priv->sel_end; } set_cursor (widget, self->priv->arrows); update_selection (self); return TRUE; } /* Single left click with Shift pressed and existing selection: enlarge selection */ if (event->type == GDK_BUTTON_PRESS && event->button == GDK_BUTTON_PRIMARY && (event->state & ALL_ACCELS_MASK) == GDK_SHIFT_MASK && self->priv->sel_start != self->priv->sel_end) { self->priv->dragend = pos; if (pos < self->priv->sel_start) self->priv->dragstart = self->priv->sel_end; else self->priv->dragstart = self->priv->sel_start; set_cursor (widget, self->priv->arrows); update_selection (self); return TRUE; } /* Single right click: change cursor */ if (event->type == GDK_BUTTON_PRESS && event->button == GDK_BUTTON_SECONDARY) { g_signal_emit_by_name (self, "cursor-changed", pos); return TRUE; } return FALSE; } static gboolean pt_waveviewer_motion_notify_event (GtkWidget *widget, GdkEventMotion *event) { PtWaveviewer *self = PT_WAVEVIEWER (widget); if (!self->priv->peaks) return FALSE; gint64 clicked; /* the sample clicked on */ gint64 pos; /* clicked sample's position in milliseconds */ clicked = (gint) event->x; pos = pixel_to_time (self, clicked); /* Right mouse button sets cursor */ if (event->state & GDK_BUTTON3_MASK) { g_signal_emit_by_name (self, "cursor-changed", pos); return TRUE; } /* Left mouse button (with or without Shift key) sets selection */ if (event->state & GDK_BUTTON1_MASK || event->state & GDK_BUTTON1_MASK & GDK_SHIFT_MASK) { self->priv->dragend = pos; update_selection (self); return TRUE; } /* No button or any other button: change pointer cursor over selection border */ if (self->priv->sel_start != self->priv->sel_end) { if (pointer_in_range (self, event->x, self->priv->sel_start) || pointer_in_range (self, event->x, self->priv->sel_end)) { set_cursor (widget, self->priv->arrows); } else { set_cursor (widget, NULL); } } return FALSE; } static gboolean pt_waveviewer_button_release_event (GtkWidget *widget, GdkEventButton *event) { if (event->button == GDK_BUTTON_PRIMARY) { set_cursor (widget, NULL); return TRUE; } return FALSE; } static void update_cached_style_values (PtWaveviewer *self) { /* Colors and direction are cached */ GtkStyleContext *context; GtkStateFlags state; GdkWindow *window = NULL; window = gtk_widget_get_parent_window (GTK_WIDGET (self)); if (!window) return; context = gtk_widget_get_style_context (GTK_WIDGET (self)); state = gtk_style_context_get_state (context); if (state & GTK_STATE_FLAG_DIR_RTL) self->priv->rtl = TRUE; else self->priv->rtl = FALSE; } static void pt_waveviewer_state_flags_changed (GtkWidget *widget, GtkStateFlags flags) { update_cached_style_values (PT_WAVEVIEWER (widget)); GTK_WIDGET_CLASS (pt_waveviewer_parent_class)->state_flags_changed (widget, flags); } static void pt_waveviewer_style_updated (GtkWidget *widget) { PtWaveviewer *self = PT_WAVEVIEWER (widget); GTK_WIDGET_CLASS (pt_waveviewer_parent_class)->style_updated (widget); update_cached_style_values (self); } static void pt_waveviewer_realize (GtkWidget *widget) { GTK_WIDGET_CLASS (pt_waveviewer_parent_class)->realize (widget); update_cached_style_values (PT_WAVEVIEWER (widget)); } static gboolean scrollbar_cb (GtkWidget *widget, GdkEventButton *event, gpointer data) { /* If user clicks on scrollbar don't follow cursor anymore. Otherwise it would scroll immediately back again. */ PtWaveviewer *self = PT_WAVEVIEWER (data); pt_waveviewer_set_follow_cursor (self, FALSE); /* Propagate signal */ return FALSE; } static void focus_cursor (PtWaveviewer *self) { self->priv->focus_on_cursor = TRUE; pt_waveviewer_cursor_set_focus (PT_WAVEVIEWER_CURSOR (self->priv->cursor), TRUE); pt_waveviewer_focus_set (PT_WAVEVIEWER_FOCUS (self->priv->focus), FALSE); } static void focus_widget (PtWaveviewer *self) { self->priv->focus_on_cursor = FALSE; pt_waveviewer_cursor_set_focus (PT_WAVEVIEWER_CURSOR (self->priv->cursor), FALSE); pt_waveviewer_focus_set (PT_WAVEVIEWER_FOCUS (self->priv->focus), TRUE); } static void focus_lost (PtWaveviewer *self) { self->priv->focus_on_cursor = FALSE; pt_waveviewer_cursor_set_focus (PT_WAVEVIEWER_CURSOR (self->priv->cursor), FALSE); pt_waveviewer_focus_set (PT_WAVEVIEWER_FOCUS (self->priv->focus), FALSE); } static gboolean pt_waveviewer_focus_out_event (GtkWidget *widget, GdkEvent *event, gpointer data) { focus_lost (PT_WAVEVIEWER (widget)); return FALSE; } static gboolean pt_waveviewer_focus_in_event (GtkWidget *widget, GdkEvent *event, gpointer data) { PtWaveviewer *self = PT_WAVEVIEWER (widget); if (!self->priv->focus_on_cursor && self->priv->peaks) focus_widget (self); return FALSE; } static gboolean pt_waveviewer_focus (GtkWidget *widget, GtkDirectionType direction, gpointer data) { PtWaveviewer *self = PT_WAVEVIEWER (widget); /* See API reference for gtk_widget_child_focus (): If moving into @direction would move focus outside of widget: return FALSE; If moving into @direction would stay inside widget: return TRUE */ /* Don't focus if empty */ if (!self->priv->peaks) return FALSE; /* Focus chain forward: no-focus -> focus-whole-widget -> focus-cursor -> no-focus */ if (gtk_widget_has_focus (widget)) { /* We have already focus, decide whether to stay in focus or not */ if (direction == GTK_DIR_TAB_FORWARD || direction == GTK_DIR_DOWN) { if (self->priv->focus_on_cursor) { focus_lost (self); } else { focus_cursor (self); return TRUE; } } if (direction == GTK_DIR_TAB_BACKWARD || direction == GTK_DIR_UP) { if (self->priv->focus_on_cursor) { focus_widget (self); return TRUE; } else { focus_lost (self); } } } else { /* We had no focus before, decide which part to focus on */ if (direction == GTK_DIR_TAB_FORWARD || direction == GTK_DIR_DOWN || direction == GTK_DIR_RIGHT) { focus_widget (self); } else { focus_cursor (self); } } return FALSE; } /** * pt_waveviewer_get_follow_cursor: * @self: the widget * * Get follow-cursor option. * * Return value: TRUE if cursor is followed, else FALSE */ gboolean pt_waveviewer_get_follow_cursor (PtWaveviewer *self) { g_return_val_if_fail (PT_IS_WAVEVIEWER (self), FALSE); return self->priv->follow_cursor; } /** * pt_waveviewer_set_follow_cursor: * @self: the widget * @follow: new value * * Set follow-cursor option to TRUE or FALSE. See also #PtWaveviewer:follow-cursor. */ void pt_waveviewer_set_follow_cursor (PtWaveviewer *self, gboolean follow) { g_return_if_fail (PT_IS_WAVEVIEWER (self)); if (self->priv->follow_cursor != follow) { self->priv->follow_cursor = follow; g_object_notify_by_pspec (G_OBJECT (self), obj_properties[PROP_FOLLOW_CURSOR]); if (follow) scroll_to_cursor (self); } } static void make_widget_ready (PtWaveviewer *self, gboolean ready) { gint widget_width; if (!ready) { if (self->priv->peaks) { g_free (self->priv->peaks); self->priv->peaks = NULL; } self->priv->peaks_size = 0; self->priv->px_per_sec = 0; self->priv->duration = 0; widget_width = -1; pt_waveviewer_cursor_render ( PT_WAVEVIEWER_CURSOR (self->priv->cursor), -1); /* Reset previous selections */ self->priv->sel_start = self->priv->sel_end = 0; self->priv->has_selection = FALSE; g_object_notify_by_pspec ( G_OBJECT (self), obj_properties[PROP_SELECTION_START]); g_object_notify_by_pspec ( G_OBJECT (self), obj_properties[PROP_SELECTION_END]); g_object_notify_by_pspec ( G_OBJECT (self), obj_properties[PROP_HAS_SELECTION]); pt_waveviewer_selection_set ( PT_WAVEVIEWER_SELECTION (self->priv->selection), 0, 0); } else { self->priv->duration = calculate_duration (self); widget_width = self->priv->peaks_size / 2; gtk_adjustment_set_upper (self->priv->adj, widget_width); } pt_waveviewer_ruler_set_ruler ( PT_WAVEVIEWER_RULER (self->priv->ruler), self->priv->peaks_size / 2, self->priv->px_per_sec, self->priv->duration); gtk_widget_set_size_request ( self->priv->waveform, widget_width, WAVE_MIN_HEIGHT); pt_waveviewer_waveform_set ( PT_WAVEVIEWER_WAVEFORM (self->priv->waveform), self->priv->peaks, self->priv->peaks_size); } static gboolean copy_wavedata (PtWaveviewer *self, PtWavedata *data) { /* Copy array. If widget is not owner of its data, bad things can happen with bindings. */ if (!data) return FALSE; if (!data->array || !data->length) return FALSE; if (!(self->priv->peaks = g_malloc (sizeof (gfloat) * data->length))) { g_debug ("waveviewer failed to allocate memory"); return FALSE; } memcpy (self->priv->peaks, data->array, sizeof(gfloat) * data->length); self->priv->peaks_size = data->length; self->priv->px_per_sec = data->px_per_sec; return TRUE; } /** * pt_waveviewer_set_wave: * @self: the widget * @data: (allow-none): a #PtWavedata * * Set wave data to show in the widget. The data is copied internally and may * be freed immediately after calling this function. If @data is NULL, a blank * widget is drawn. */ void pt_waveviewer_set_wave (PtWaveviewer *self, PtWavedata *data) { g_return_if_fail (PT_IS_WAVEVIEWER (self)); make_widget_ready (self, FALSE); if (!copy_wavedata (self, data)) return; make_widget_ready (self, TRUE); } static void pt_waveviewer_finalize (GObject *object) { PtWaveviewer *self = PT_WAVEVIEWER (object); g_free (self->priv->peaks); g_clear_object (&self->priv->arrows); G_OBJECT_CLASS (pt_waveviewer_parent_class)->finalize (object); } static void pt_waveviewer_get_property (GObject *object, guint property_id, GValue *value, GParamSpec *pspec) { PtWaveviewer *self = PT_WAVEVIEWER (object); switch (property_id) { case PROP_FOLLOW_CURSOR: g_value_set_boolean (value, self->priv->follow_cursor); break; case PROP_FIXED_CURSOR: g_value_set_boolean (value, self->priv->fixed_cursor); break; case PROP_SHOW_RULER: g_value_set_boolean (value, self->priv->show_ruler); break; case PROP_HAS_SELECTION: g_value_set_boolean (value, self->priv->has_selection); break; case PROP_SELECTION_START: g_value_set_int64 (value, self->priv->sel_start); break; case PROP_SELECTION_END: g_value_set_int64 (value, self->priv->sel_end); break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, property_id, pspec); break; } } static void pt_waveviewer_set_property (GObject *object, guint property_id, const GValue *value, GParamSpec *pspec) { PtWaveviewer *self = PT_WAVEVIEWER (object); switch (property_id) { case PROP_PLAYBACK_CURSOR: /* ignore if cursor's value didn't change */ if (self->priv->playback_cursor == g_value_get_int64 (value)) break; self->priv->playback_cursor = g_value_get_int64 (value); /* ignore if we're not realized yet, widget is in construction */ if (!gtk_widget_get_realized (GTK_WIDGET (self))) break; if (self->priv->follow_cursor) scroll_to_cursor (self); pt_waveviewer_cursor_render (PT_WAVEVIEWER_CURSOR (self->priv->cursor), time_to_pixel (self, self->priv->playback_cursor)); break; case PROP_FOLLOW_CURSOR: self->priv->follow_cursor = g_value_get_boolean (value); if (gtk_widget_get_realized (GTK_WIDGET (self)) && self->priv->follow_cursor) scroll_to_cursor (self); break; case PROP_FIXED_CURSOR: self->priv->fixed_cursor = g_value_get_boolean (value); break; case PROP_SHOW_RULER: self->priv->show_ruler = g_value_get_boolean (value); gtk_revealer_set_reveal_child (GTK_REVEALER (self->priv->revealer), self->priv->show_ruler); break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, property_id, pspec); break; } } static void pt_waveviewer_constructed (GObject *object) { g_debug ("waveviewer constructed"); PtWaveviewer *self = PT_WAVEVIEWER (object); self->priv->adj = gtk_scrolled_window_get_hadjustment (GTK_SCROLLED_WINDOW (self)); g_signal_connect (gtk_scrolled_window_get_hscrollbar (GTK_SCROLLED_WINDOW (self)), "button_press_event", G_CALLBACK (scrollbar_cb), self); } static GdkCursor * get_resize_cursor (void) { GdkCursor *result; GdkDisplay *display; display = gdk_display_get_default (); result = gdk_cursor_new_from_name (display, "ew-resize"); if (!result) result = gdk_cursor_new_from_name (display, "col-resize"); if (!result) result = gdk_cursor_new_for_display (display, GDK_SB_H_DOUBLE_ARROW); return result; } static void pt_waveviewer_init (PtWaveviewer *self) { self->priv = pt_waveviewer_get_instance_private (self); GtkWidget *box, *overlay; GtkCssProvider *provider; GFile *css_file; self->priv->peaks = NULL; self->priv->peaks_size = 0; self->priv->duration = 0; self->priv->playback_cursor = 0; self->priv->follow_cursor = TRUE; self->priv->focus_on_cursor = FALSE; self->priv->sel_start = 0; self->priv->sel_end = 0; self->priv->arrows = get_resize_cursor (); self->priv->waveform = pt_waveviewer_waveform_new (); self->priv->focus = pt_waveviewer_focus_new (); self->priv->cursor = pt_waveviewer_cursor_new (); self->priv->selection = pt_waveviewer_selection_new (); self->priv->ruler = pt_waveviewer_ruler_new (); self->priv->revealer = gtk_revealer_new (); /* Setup scrolled window */ box = gtk_box_new (GTK_ORIENTATION_VERTICAL, 0); overlay = gtk_overlay_new (); gtk_revealer_set_transition_type (GTK_REVEALER (self->priv->revealer), GTK_REVEALER_TRANSITION_TYPE_SLIDE_UP); gtk_revealer_set_transition_duration (GTK_REVEALER (self->priv->revealer), 200); gtk_container_add (GTK_CONTAINER (overlay), self->priv->waveform); gtk_overlay_add_overlay (GTK_OVERLAY (overlay), self->priv->selection); gtk_overlay_add_overlay (GTK_OVERLAY (overlay), self->priv->cursor); gtk_overlay_add_overlay (GTK_OVERLAY (overlay), self->priv->focus); gtk_container_add_with_properties ( GTK_CONTAINER (box), overlay, "expand", TRUE, "fill", TRUE, NULL); gtk_container_add (GTK_CONTAINER (self->priv->revealer), self->priv->ruler); gtk_container_add (GTK_CONTAINER (box), self->priv->revealer); gtk_container_add (GTK_CONTAINER (self), box); gtk_scrolled_window_set_policy ( GTK_SCROLLED_WINDOW (self), GTK_POLICY_ALWAYS, GTK_POLICY_NEVER); gtk_scrolled_window_set_shadow_type ( GTK_SCROLLED_WINDOW (self), GTK_SHADOW_IN); #if GTK_CHECK_VERSION(3,16,0) gtk_scrolled_window_set_overlay_scrolling (GTK_SCROLLED_WINDOW (self), FALSE); #endif gtk_widget_show_all (GTK_WIDGET (self)); css_file = g_file_new_for_uri ("resource:///com/github/gkarsay/libparlatype/pt-waveviewer.css"); provider = gtk_css_provider_new (); gtk_css_provider_load_from_file (provider, css_file, NULL); gtk_style_context_add_provider_for_screen ( gdk_screen_get_default (), GTK_STYLE_PROVIDER (provider), GTK_STYLE_PROVIDER_PRIORITY_APPLICATION); g_object_unref (css_file); g_object_unref (provider); /* If overriding these vfuncs something's going wrong, note that focus-in an focus-out need GdkEventFocus as 2nd parameter in vfunc */ g_signal_connect (self, "focus", G_CALLBACK (pt_waveviewer_focus), NULL); g_signal_connect (self, "focus-in-event", G_CALLBACK (pt_waveviewer_focus_in_event), NULL); g_signal_connect (self, "focus-out-event", G_CALLBACK (pt_waveviewer_focus_out_event), NULL); } static void pt_waveviewer_class_init (PtWaveviewerClass *klass) { GObjectClass *gobject_class = G_OBJECT_CLASS (klass); GtkWidgetClass *widget_class = GTK_WIDGET_CLASS (klass); gobject_class->set_property = pt_waveviewer_set_property; gobject_class->get_property = pt_waveviewer_get_property; gobject_class->constructed = pt_waveviewer_constructed; gobject_class->finalize = pt_waveviewer_finalize; widget_class->button_press_event = pt_waveviewer_button_press_event; widget_class->button_release_event = pt_waveviewer_button_release_event; widget_class->key_press_event = pt_waveviewer_key_press_event; widget_class->motion_notify_event = pt_waveviewer_motion_notify_event; widget_class->realize = pt_waveviewer_realize; widget_class->state_flags_changed = pt_waveviewer_state_flags_changed; widget_class->style_updated = pt_waveviewer_style_updated; /** * PtWaveviewer::cursor-changed: * @viewer: the waveviewer emitting the signal * @position: the new position in stream in milliseconds * * Signals that the cursor's position was changed by the user. */ signals[CURSOR_CHANGED] = g_signal_new ("cursor-changed", PT_TYPE_WAVEVIEWER, G_SIGNAL_RUN_FIRST, 0, NULL, NULL, g_cclosure_marshal_VOID__INT, G_TYPE_NONE, 1, G_TYPE_INT64); /** * PtWaveviewer::selection-changed: * @viewer: the waveviewer emitting the signal * * Signals that the selection was changed (or unselected) by the user. * To query the new selection see #PtWaveviewer:has-selection, * #PtWaveviewer:selection-start and #PtWaveviewer:selection-end. */ signals[SELECTION_CHANGED] = g_signal_new ("selection-changed", PT_TYPE_WAVEVIEWER, G_SIGNAL_RUN_FIRST, 0, NULL, NULL, g_cclosure_marshal_VOID__VOID, G_TYPE_NONE, 0); /** * PtWaveviewer::play-toggled: * @viewer: the waveviewer emitting the signal * * Signals that the user requested to toggle play/pause. */ signals[PLAY_TOGGLED] = g_signal_new ("play-toggled", PT_TYPE_WAVEVIEWER, G_SIGNAL_RUN_FIRST, 0, NULL, NULL, g_cclosure_marshal_VOID__VOID, G_TYPE_NONE, 0); /** * PtWaveviewer:playback-cursor: * * Current playback position in milliseconds. */ obj_properties[PROP_PLAYBACK_CURSOR] = g_param_spec_int64 ( "playback-cursor", "Cursor position", "Cursor's position in 1/1000 seconds", 0, G_MAXINT64, 0, G_PARAM_WRITABLE | G_PARAM_STATIC_STRINGS); /** * PtWaveviewer:follow-cursor: * * If the widget follows the cursor, it scrolls automatically to the * cursor's position. Note that the widget will change this property to * FALSE if the user scrolls the widget manually. */ obj_properties[PROP_FOLLOW_CURSOR] = g_param_spec_boolean ( "follow-cursor", _("Follow cursor"), _("Scroll automatically to the cursor's position"), TRUE, G_PARAM_READWRITE | G_PARAM_CONSTRUCT | G_PARAM_STATIC_STRINGS); /** * PtWaveviewer:fixed-cursor: * * If TRUE, in follow-cursor mode the cursor is at a fixed position and the * waveform is scrolling. If FALSE the cursor is moving. * * If #PtWaveviewer:follow-cursor is FALSE, this has no effect. */ obj_properties[PROP_FIXED_CURSOR] = g_param_spec_boolean ( "fixed-cursor", _("Fixed cursor"), _("If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving."), TRUE, G_PARAM_READWRITE | G_PARAM_CONSTRUCT | G_PARAM_STATIC_STRINGS); /** * PtWaveviewer:show-ruler: * * Whether the ruler is shown (TRUE) or not (FALSE). */ obj_properties[PROP_SHOW_RULER] = g_param_spec_boolean ( "show-ruler", _("Show ruler"), _("Show the time scale with time marks"), TRUE, G_PARAM_READWRITE | G_PARAM_CONSTRUCT | G_PARAM_STATIC_STRINGS); /** * PtWaveviewer:has-selection: * * Whether something is selected (TRUE) or not (FALSE). */ obj_properties[PROP_HAS_SELECTION] = g_param_spec_boolean ( "has-selection", "Has selection", "Indicates whether something is selected", FALSE, G_PARAM_READABLE | G_PARAM_STATIC_STRINGS); /** * PtWaveviewer:selection-start: * * Start time of selection in milliseconds. If it's equal to the end * time, there is no selection. See also #PtWaveviewer:has-selection. */ obj_properties[PROP_SELECTION_START] = g_param_spec_int64 ( "selection-start", "Start time of selection", "Start time of selection", 0, G_MAXINT64, 0, G_PARAM_READABLE | G_PARAM_STATIC_STRINGS); /** * PtWaveviewer:selection-end: * * End time of selection in milliseconds. If it's equal to the start * time, there is no selection. See also #PtWaveviewer:has-selection. */ obj_properties[PROP_SELECTION_END] = g_param_spec_int64 ( "selection-end", "End time of selection", "End time of selection", 0, G_MAXINT64, 0, G_PARAM_READABLE | G_PARAM_STATIC_STRINGS); g_object_class_install_properties ( gobject_class, N_PROPERTIES, obj_properties); } /** * pt_waveviewer_new: * * Create a new, initially blank waveform viewer widget. Use * pt_waveviewer_set_wave() to pass wave data. * * After use gtk_widget_destroy() it. * * Returns: the widget */ GtkWidget * pt_waveviewer_new (void) { return GTK_WIDGET (g_object_new (PT_TYPE_WAVEVIEWER, NULL)); } parlatype-1.5.4/libparlatype/src/pt-waveviewer-focus.c0000644000175000017500000000654113200427162020013 00000000000000/* Copyright (C) 2017 Gabor Karsay * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ /* PtWaveviewerFocus is a GtkDrawingArea. It is part of a GtkOverlay stack, on the very top. It renders only a focus line on the visible rectangle of the PtWaveviewer parent. */ #include "config.h" #include "pt-waveviewer.h" #include "pt-waveviewer-focus.h" struct _PtWaveviewerFocusPrivate { gboolean focus; /* whether to render focus or not */ GtkAdjustment *adj; /* the parent PtWaveviewer's adjustment */ }; G_DEFINE_TYPE_WITH_PRIVATE (PtWaveviewerFocus, pt_waveviewer_focus, GTK_TYPE_DRAWING_AREA); static gboolean pt_waveviewer_focus_draw (GtkWidget *widget, cairo_t *cr) { PtWaveviewerFocus *self = (PtWaveviewerFocus *) widget; if (!self->priv->focus || !self->priv->adj) return FALSE; GtkStyleContext *context; gint left, height, width; context = gtk_widget_get_style_context (GTK_WIDGET (self)); height = gtk_widget_get_allocated_height (widget); width = (gint) gtk_adjustment_get_page_size (self->priv->adj); left = (gint) gtk_adjustment_get_value (self->priv->adj); gtk_render_focus (context, cr, left, 0, width, height); return FALSE; } static void adj_value_changed (GtkAdjustment *adj, gpointer data) { PtWaveviewerFocus *self = PT_WAVEVIEWER_FOCUS (data); if (self->priv->focus) gtk_widget_queue_draw (GTK_WIDGET (data)); } static void pt_waveviewer_focus_hierarchy_changed (GtkWidget *widget, GtkWidget *old_parent) { PtWaveviewerFocus *self = PT_WAVEVIEWER_FOCUS (widget); if (self->priv->adj) return; /* Get parent's GtkAdjustment */ GtkWidget *parent = NULL; parent = gtk_widget_get_ancestor (widget, PT_TYPE_WAVEVIEWER); if (parent) { self->priv->adj = gtk_scrolled_window_get_hadjustment (GTK_SCROLLED_WINDOW (parent)); g_signal_connect (self->priv->adj, "value-changed", G_CALLBACK (adj_value_changed), self); } } void pt_waveviewer_focus_set (PtWaveviewerFocus *self, gboolean focus) { if (self->priv->focus == focus) return; self->priv->focus = focus; gtk_widget_queue_draw (GTK_WIDGET (self)); } static void pt_waveviewer_focus_init (PtWaveviewerFocus *self) { self->priv = pt_waveviewer_focus_get_instance_private (self); self->priv->focus = FALSE; self->priv->adj = NULL; gtk_widget_set_name (GTK_WIDGET (self), "focus"); gtk_widget_set_events (GTK_WIDGET (self), GDK_ALL_EVENTS_MASK); } static void pt_waveviewer_focus_class_init (PtWaveviewerFocusClass *klass) { GtkWidgetClass *widget_class = GTK_WIDGET_CLASS (klass); widget_class->hierarchy_changed = pt_waveviewer_focus_hierarchy_changed; widget_class->draw = pt_waveviewer_focus_draw; } GtkWidget * pt_waveviewer_focus_new (void) { return GTK_WIDGET (g_object_new (PT_TYPE_WAVEVIEWER_FOCUS, NULL)); } parlatype-1.5.4/libparlatype/src/pt-waveviewer-selection.c0000644000175000017500000001273513200427162020663 00000000000000/* Copyright (C) 2017 Gabor Karsay * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ /* PtWaveviewerSelection is a GtkDrawingArea. It is part of a GtkOverlay stack. It renders only the selection. */ #include "config.h" #include "pt-waveviewer-selection.h" struct _PtWaveviewerSelectionPrivate { GdkRGBA selection_color; gint start; gint end; }; G_DEFINE_TYPE_WITH_PRIVATE (PtWaveviewerSelection, pt_waveviewer_selection, GTK_TYPE_DRAWING_AREA); static gboolean pt_waveviewer_selection_draw (GtkWidget *widget, cairo_t *cr) { PtWaveviewerSelection *self = (PtWaveviewerSelection *) widget; gint height; gint width; height = gtk_widget_get_allocated_height (widget); width = gtk_widget_get_allocated_width (widget); /* clear everything */ cairo_set_source_rgba (cr, 0, 0, 0, 0); cairo_rectangle (cr, 0, 0, width, height); cairo_fill (cr); /* paint selection */ if (self->priv->start != self->priv->end) { gdk_cairo_set_source_rgba (cr, &self->priv->selection_color); cairo_rectangle (cr, self->priv->start, 0, self->priv->end - self->priv->start, height); cairo_fill (cr); } return FALSE; } static void draw_selection (PtWaveviewerSelection *self) { gint height; height = gtk_widget_get_allocated_height (GTK_WIDGET (self)); gtk_widget_queue_draw_area (GTK_WIDGET (self), self->priv->start, 0, self->priv->end - self->priv->start, height); } static void update_cached_style_values (PtWaveviewerSelection *self) { /* Update color */ GtkStyleContext *context; GtkStateFlags state; GdkWindow *window = NULL; window = gtk_widget_get_parent_window (GTK_WIDGET (self)); if (!window) return; context = gtk_widget_get_style_context (GTK_WIDGET (self)); state = gtk_style_context_get_state (context); gtk_style_context_get_color (context, state, &self->priv->selection_color); } static void pt_waveviewer_selection_state_flags_changed (GtkWidget *widget, GtkStateFlags flags) { update_cached_style_values (PT_WAVEVIEWER_SELECTION (widget)); GTK_WIDGET_CLASS (pt_waveviewer_selection_parent_class)->state_flags_changed (widget, flags); } static void pt_waveviewer_selection_style_updated (GtkWidget *widget) { PtWaveviewerSelection *self = (PtWaveviewerSelection *) widget; GTK_WIDGET_CLASS (pt_waveviewer_selection_parent_class)->style_updated (widget); update_cached_style_values (self); draw_selection (self); } static void pt_waveviewer_selection_realize (GtkWidget *widget) { GTK_WIDGET_CLASS (pt_waveviewer_selection_parent_class)->realize (widget); update_cached_style_values (PT_WAVEVIEWER_SELECTION (widget)); } void pt_waveviewer_selection_set (PtWaveviewerSelection *self, gint start, gint end) { gint x1, x2, height; /* Case: no change */ if (self->priv->start == start && self->priv->end == end) return; /* Case: nothing selected before, draw selection only */ if (self->priv->start == self->priv->end) { self->priv->start = start; self->priv->end = end; draw_selection (self); return; } /* Case: start and end changed, draw old and new selection */ if (self->priv->start != start && self->priv->end != end) { draw_selection (self); self->priv->start = start; self->priv->end = end; draw_selection (self); return; } if (self->priv->start == start) { /* Case: start unchanged, draw only difference at end */ if (self->priv->end < end) { x1 = self->priv->end; x2 = end - self->priv->end; } else { x1 = end; x2 = self->priv->end - end; } } else { /* Case: end unchanged, draw only difference at start */ if (self->priv->start < start) { x1 = self->priv->start; x2 = start - self->priv->start; } else { x1 = start; x2 = self->priv->start - start; } } self->priv->start = start; self->priv->end = end; height = gtk_widget_get_allocated_height (GTK_WIDGET (self)); gtk_widget_queue_draw_area (GTK_WIDGET (self), x1, 0, x2, height); } static void pt_waveviewer_selection_init (PtWaveviewerSelection *self) { self->priv = pt_waveviewer_selection_get_instance_private (self); GtkStyleContext *context; self->priv->start = 0; self->priv->end = 0; context = gtk_widget_get_style_context (GTK_WIDGET (self)); gtk_style_context_add_class (context, "selection"); gtk_widget_set_events (GTK_WIDGET (self), GDK_ALL_EVENTS_MASK); } static void pt_waveviewer_selection_class_init (PtWaveviewerSelectionClass *klass) { GtkWidgetClass *widget_class = GTK_WIDGET_CLASS (klass); widget_class->draw = pt_waveviewer_selection_draw; widget_class->realize = pt_waveviewer_selection_realize; widget_class->state_flags_changed = pt_waveviewer_selection_state_flags_changed; widget_class->style_updated = pt_waveviewer_selection_style_updated; } GtkWidget * pt_waveviewer_selection_new (void) { return GTK_WIDGET (g_object_new (PT_TYPE_WAVEVIEWER_SELECTION, NULL)); } parlatype-1.5.4/libparlatype/src/pt-resources.h0000644000175000017500000000022113204122210016504 00000000000000#ifndef __RESOURCE_parlatype_H__ #define __RESOURCE_parlatype_H__ #include extern GResource *parlatype_get_resource (void); #endif parlatype-1.5.4/libparlatype/src/pt-player.c0000644000175000017500000013002413176574165016022 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #include "config.h" #include /* sscanf */ #include #define GETTEXT_PACKAGE PACKAGE #include #include #include #include "pt-waveloader.h" #include "pt-player.h" struct _PtPlayerPrivate { GstElement *play; guint bus_watch_id; gint64 dur; gdouble speed; gdouble volume; gint64 segstart; gint64 segend; GCancellable *c; PtWaveloader *wl; }; enum { PROP_0, PROP_SPEED, PROP_VOLUME, N_PROPERTIES }; static GParamSpec *obj_properties[N_PROPERTIES] = { NULL, }; #define METADATA_POSITION "metadata::parlatype::position" #define ONE_HOUR 3600000 #define TEN_MINUTES 600000 static void pt_player_initable_iface_init (GInitableIface *iface); static gboolean bus_call (GstBus *bus, GstMessage *msg, gpointer data); static void remove_message_bus (PtPlayer *player); G_DEFINE_TYPE_WITH_CODE (PtPlayer, pt_player, G_TYPE_OBJECT, G_ADD_PRIVATE (PtPlayer) G_IMPLEMENT_INTERFACE (G_TYPE_INITABLE, pt_player_initable_iface_init)) /** * SECTION: pt-player * @short_description: The GStreamer backend for Parlatype. * @stability: Unstable * @include: parlatype/pt-player.h * * PtPlayer is the GStreamer backend for Parlatype. Construct it with #pt_player_new(). * Then you have to open a file, either with pt_player_open_uri_async() or * pt_player_open_uri(), the blocking version. * * The internal time unit in PtPlayer are milliseconds and for scale widgets there * is a scale from 0 to 1000. Use it to jump to a position or to update your widget. * * While playing PtPlayer emits these signals: * - end-of-stream: End of file reached, in the GUI you might want to jump * to the beginning, reset play button etc. * - error: A fatal error occured, the player is reset. There's an error message. * * PtPlayer has two properties: * - speed: is a double from 0.5 to 1.5. 1.0 is normal playback, < 1.0 is slower, * > 1.0 is faster. Changing the "speed" property doesn't change playback though. * Use the method instead. * - Volume is a double from 0 to 1. It can be set via the method or setting the "volume" property. */ /* -------------------------- static helpers -------------------------------- */ static gboolean pt_player_query_position (PtPlayer *player, gpointer position) { gboolean result; result = gst_element_query_position (player->priv->play, GST_FORMAT_TIME, position); return result; } static void pt_player_clear (PtPlayer *player) { remove_message_bus (player); gst_element_set_state (player->priv->play, GST_STATE_NULL); } static void pt_player_seek (PtPlayer *player, gint64 position) { /* Set the pipeline to @position. The stop position (player->priv->segend) usually doesn't has to be set, but it's important after a segment/selection change and after a rewind (trickmode) has been completed. To simplify things, we always set the stop position. */ gst_element_seek ( player->priv->play, player->priv->speed, GST_FORMAT_TIME, GST_SEEK_FLAG_FLUSH | GST_SEEK_FLAG_ACCURATE, GST_SEEK_TYPE_SET, position, GST_SEEK_TYPE_SET, player->priv->segend); /* Block until state changed */ gst_element_get_state ( player->priv->play, NULL, NULL, GST_CLOCK_TIME_NONE); } static GFile* pt_player_get_file (PtPlayer *player) { gchar *uri = NULL; GFile *result = NULL; g_object_get (G_OBJECT (player->priv->play), "current_uri", &uri, NULL); if (uri) { result = g_file_new_for_uri (uri); g_free (uri); } return result; } static void metadata_save_position (PtPlayer *player) { /* Saves current position in milliseconds as metadata to file */ GError *error = NULL; GFile *file = NULL; GFileInfo *info; gint64 pos; gchar value[64]; if (!pt_player_query_position (player, &pos)) return; file = pt_player_get_file (player); if (!file) return; pos = pos / GST_MSECOND; info = g_file_info_new (); g_snprintf (value, sizeof (value), "%" G_GINT64_FORMAT, pos); g_file_info_set_attribute_string (info, METADATA_POSITION, value); g_file_set_attributes_from_info ( file, info, G_FILE_QUERY_INFO_NONE, NULL, &error); if (error) { g_printerr ("%s\n", error->message); g_error_free (error); } g_debug ("metadata: position saved"); g_object_unref (file); g_object_unref (info); } static void metadata_get_position (PtPlayer *player) { /* Queries position stored in metadata from file. Sets position to that value or to 0 */ GError *error = NULL; GFile *file = NULL; GFileInfo *info; gchar *value = NULL; gint64 pos = 0; file = pt_player_get_file (player); if (!file) return; info = g_file_query_info (file, METADATA_POSITION, G_FILE_QUERY_INFO_NONE, NULL, &error); if (error) { g_printerr ("%s\n", error->message); g_error_free (error); g_object_unref (file); return; } value = g_file_info_get_attribute_as_string (info, METADATA_POSITION); if (value) { pos = g_ascii_strtoull (value, NULL, 0); g_free (value); if (pos > 0) { g_debug ("metadata: got position"); } } /* Set either to position or 0 */ pt_player_jump_to_position (player, pos); g_object_unref (file); g_object_unref (info); } static void remove_message_bus (PtPlayer *player) { if (player->priv->bus_watch_id > 0) { g_source_remove (player->priv->bus_watch_id); player->priv->bus_watch_id = 0; } } static void add_message_bus (PtPlayer *player) { GstBus *bus; remove_message_bus (player); bus = gst_pipeline_get_bus (GST_PIPELINE (player->priv->play)); player->priv->bus_watch_id = gst_bus_add_watch (bus, bus_call, player); gst_object_unref (bus); } static gboolean bus_call (GstBus *bus, GstMessage *msg, gpointer data) { PtPlayer *player = (PtPlayer *) data; gint64 pos; /*g_debug ("Message: %s; sent by: %s", GST_MESSAGE_TYPE_NAME (msg), GST_MESSAGE_SRC_NAME (msg));*/ switch (GST_MESSAGE_TYPE (msg)) { case GST_MESSAGE_SEGMENT_DONE: /* From GStreamer documentation: When performing a segment seek: after the playback of the segment completes, no EOS will be emitted by the element that performed the seek, but a GST_MESSAGE_SEGMENT_DONE message will be posted on the bus by the element. */ case GST_MESSAGE_EOS: /* We rely on that SEGMENT_DONE/EOS is exactly at the end of segment. This works in Debian 8, but not Ubuntu 16.04 (because of newer GStreamer?) with mp3s. Jump to the real end. */ pt_player_query_position (player, &pos); if (pos != player->priv->segend) { g_debug ("correcting EOS position: %" G_GINT64_FORMAT " ms", GST_TIME_AS_MSECONDS (player->priv->segend - pos)); pt_player_seek (player, player->priv->segend); } g_signal_emit_by_name (player, "end-of-stream"); break; case GST_MESSAGE_ERROR: { gchar *debug; GError *error; gst_message_parse_error (msg, &error, &debug); g_debug ("ERROR from element %s: %s", GST_OBJECT_NAME (msg->src), error->message); g_debug ("Debugging info: %s", (debug) ? debug : "none"); g_free (debug); g_signal_emit_by_name (player, "error", error); g_error_free (error); pt_player_clear (player); break; } default: break; } return TRUE; } /* -------------------------- opening files --------------------------------- */ static void propagate_progress_cb (PtWaveloader *wl, gdouble progress, PtPlayer *player) { g_signal_emit_by_name (player, "load-progress", progress); } static void load_cb (PtWaveloader *wl, GAsyncResult *res, gpointer *data) { GTask *task = (GTask *) data; PtPlayer *player = g_task_get_source_object (task); GError *error = NULL; if (pt_waveloader_load_finish (wl, res, &error)) { player->priv->dur = player->priv->segend = pt_waveloader_get_duration (player->priv->wl); player->priv->segstart = 0; /* setup message handler */ add_message_bus (player); pt_player_pause (player); /* Block until state changed */ gst_element_get_state ( player->priv->play, NULL, NULL, GST_CLOCK_TIME_NONE); metadata_get_position (player); g_task_return_boolean (task, TRUE); } else { g_clear_object (&wl); player->priv->wl = NULL; g_task_return_error (task, error); } g_object_unref (player->priv->c); g_object_unref (task); } /** * pt_player_open_uri_finish: * @player: a #PtPlayer * @result: the #GAsyncResult passed to your #GAsyncReadyCallback * @error: (allow-none): a pointer to a NULL #GError, or NULL * * Gives the result of the async opening operation. A cancelled operation results * in an error, too. * * Return value: TRUE if successful, or FALSE with error set */ gboolean pt_player_open_uri_finish (PtPlayer *player, GAsyncResult *result, GError **error) { g_return_val_if_fail (g_task_is_valid (result, player), FALSE); return g_task_propagate_boolean (G_TASK (result), error); } /** * pt_player_open_uri_async: * @player: a #PtPlayer * @uri: the URI of the file * @callback: (scope async): a #GAsyncReadyCallback to call when the operation is complete * @user_data: (closure): user_data for callback * * Opens a local audio file for playback. It doesn't work with videos or streams. * Only one file can be open at a time, playlists are not supported by the * backend. Opening a new file will close the previous one. * * When closing a file or on object destruction PtPlayer tries to write the * last position into the file's metadata. On opening a file it reads the * metadata and jumps to the last known position if found. * * The player is set to the paused state and ready for playback. To start * playback use @pt_player_play(). * * This is an asynchronous operation, to get the result call * pt_player_open_uri_finish() in your callback. For the blocking version see * pt_player_open_uri(). * * While loading the file there is a #PtPlayer::load-progress signal emitted which stops before * reaching 100%. Don't use it to determine whether the operation is finished. */ void pt_player_open_uri_async (PtPlayer *player, gchar *uri, GAsyncReadyCallback callback, gpointer user_data) { g_return_if_fail (PT_IS_PLAYER (player)); g_return_if_fail (uri != NULL); GTask *task; GFile *file; gchar *location = NULL; task = g_task_new (player, NULL, callback, user_data); /* Change uri to location */ file = g_file_new_for_uri (uri); location = g_file_get_path (file); if (!location) { g_task_return_new_error ( task, GST_RESOURCE_ERROR, GST_RESOURCE_ERROR_NOT_FOUND, /* Translators: %s is a detailed error message. */ _("URI not valid: %s"), uri); g_object_unref (file); g_object_unref (task); return; } if (!g_file_query_exists (file, NULL)) { g_task_return_new_error ( task, GST_RESOURCE_ERROR, GST_RESOURCE_ERROR_NOT_FOUND, /* Translators: %s is a detailed error message. */ _("File not found: %s"), location); g_object_unref (file); g_free (location); g_object_unref (task); return; } /* If we had an open file before, remember its position */ metadata_save_position (player); /* Reset any open streams */ pt_player_clear (player); player->priv->dur = -1; g_object_set (G_OBJECT (player->priv->play), "uri", uri, NULL); g_object_unref (file); g_free (location); g_clear_object (&player->priv->wl); player->priv->wl = pt_waveloader_new (uri); g_signal_connect (player->priv->wl, "progress", G_CALLBACK (propagate_progress_cb), player); player->priv->c = g_cancellable_new (); pt_waveloader_load_async (player->priv->wl, player->priv->c, (GAsyncReadyCallback) load_cb, task); } typedef struct { GAsyncResult *res; GMainLoop *loop; } SyncData; static void quit_loop_cb (PtPlayer *player, GAsyncResult *res, gpointer user_data) { SyncData *data = user_data; data->res = g_object_ref (res); g_main_loop_quit (data->loop); } /** * pt_player_open_uri: * @player: a #PtPlayer * @uri: the URI of the file * @error: (allow-none): return location for an error, or NULL * * Opens a local audio file for playback. It doesn't work with videos or streams. * Only one file can be open at a time, playlists are not supported by the * backend. Opening a new file will close the previous one. * * When closing a file or on object destruction PtPlayer tries to write the * last position into the file's metadata. On opening a file it reads the * metadata and jumps to the last known position if found. * * The player is set to the paused state and ready for playback. To start * playback use @pt_player_play(). * * This operation blocks until it is finished. It returns TRUE on success or * FALSE and an error. For the asynchronous version see * pt_player_open_uri_async(). * * While loading the file there is a #PtPlayer::load-progress signal emitted. * However, it doesn't emit 100%, the operation is finished when TRUE is returned. * * Return value: TRUE if successful, or FALSE with error set */ gboolean pt_player_open_uri (PtPlayer *player, gchar *uri, GError **error) { g_return_val_if_fail (PT_IS_PLAYER (player), FALSE); g_return_val_if_fail (uri != NULL, FALSE); g_return_val_if_fail (error == NULL || *error == NULL, FALSE); gboolean result; SyncData data; GMainContext *context; context = g_main_context_new (); g_main_context_push_thread_default (context); data.loop = g_main_loop_new (context, FALSE); data.res = NULL; pt_player_open_uri_async (player, uri, (GAsyncReadyCallback) quit_loop_cb, &data); g_main_loop_run (data.loop); result = pt_player_open_uri_finish (player, data.res, error); g_main_context_unref (context); g_main_loop_unref (data.loop); return result; } /** * pt_player_cancel: * @player: a #PtPlayer * * Cancels the file opening operation, which triggers an error message. */ void pt_player_cancel (PtPlayer *player) { g_cancellable_cancel (player->priv->c); } /* ------------------------- Basic controls --------------------------------- */ /** * pt_player_pause: * @player: a #PtPlayer * * Sets the player to the paused state, meaning it stops playback and doesn't * change position. To resume playback use @pt_player_play(). */ void pt_player_pause (PtPlayer *player) { g_return_if_fail (PT_IS_PLAYER (player)); gst_element_set_state (player->priv->play, GST_STATE_PAUSED); } /** * pt_player_play: * @player: a #PtPlayer * * Starts playback at the defined speed until it reaches the end of stream (or * the end of the selection).. */ void pt_player_play (PtPlayer *player) { g_return_if_fail (PT_IS_PLAYER (player)); gst_element_set_state (player->priv->play, GST_STATE_PLAYING); } /** * pt_player_set_selection: * @player: a #PtPlayer * @start: selection start time in milliseconds * @end: selection end time in milliseconds * * Set a selection. If the current position is outside the selection, it will * be set to the selection's start position, otherwise the current position is * not changed. Playing will end at the stop position and it's not possible to * jump out of the selection until it is cleared with #pt_player_clear_selection. */ void pt_player_set_selection (PtPlayer *player, gint64 start, gint64 end) { g_return_if_fail (PT_IS_PLAYER (player)); g_return_if_fail (start < end); player->priv->segstart = GST_MSECOND * start; player->priv->segend = GST_MSECOND * end; gint64 pos; if (!pt_player_query_position (player, &pos)) return; if (pos < player->priv->segstart || pos > player->priv->segend) pos = player->priv->segstart; pt_player_seek (player, pos); } /** * pt_player_clear_selection: * @player: a #PtPlayer * * Clear and reset any selection. */ void pt_player_clear_selection (PtPlayer *player) { g_return_if_fail (PT_IS_PLAYER (player)); gint64 pos; if (!pt_player_query_position (player, &pos)) return; player->priv->segstart = 0; player->priv->segend = player->priv->dur; pt_player_seek (player, pos); } /** * pt_player_rewind: * @player: a #PtPlayer * @speed: the speed * * Rewinds at the given speed. @speed accepts positive as well as negative * values and normalizes them to play backwards. * * This is only available with GStreamer >= 1.6.3 (because of * https://bugzilla.gnome.org/show_bug.cgi?id=757033). * If you call this with an older version of GStreamer, it will only * print a warning to standard output. * Note that depending on the file/stream format this works more or less * good. */ void pt_player_rewind (PtPlayer *player, gdouble speed) { #if GST_CHECK_VERSION(1,6,3) g_return_if_fail (PT_IS_PLAYER (player)); g_return_if_fail (speed != 0); gint64 pos; if (!pt_player_query_position (player, &pos)) return; if (speed > 0) speed = speed * -1; gst_element_seek ( player->priv->play, speed, GST_FORMAT_TIME, GST_SEEK_FLAG_FLUSH | GST_SEEK_FLAG_TRICKMODE, GST_SEEK_TYPE_SET, player->priv->segstart, GST_SEEK_TYPE_SET, pos); /* Block until state changed */ gst_element_get_state ( player->priv->play, NULL, NULL, GST_CLOCK_TIME_NONE); pt_player_play (player); #else g_warning ("pt_player_rewind() is not available on this system"); #endif } /** * pt_player_fast_forward: * @player: a #PtPlayer * @speed: the speed * * Play fast forward at the given speed. * This is only available with GStreamer >= 1.6.3 (because rewind * is working properly with that version). * If you call this with an older version of GStreamer, it will only * print a warning to standard output. */ void pt_player_fast_forward (PtPlayer *player, gdouble speed) { #if GST_CHECK_VERSION(1,6,3) g_return_if_fail (PT_IS_PLAYER (player)); g_return_if_fail (speed > 0); gint64 pos; if (!pt_player_query_position (player, &pos)) return; gst_element_seek ( player->priv->play, speed, GST_FORMAT_TIME, GST_SEEK_FLAG_FLUSH | GST_SEEK_FLAG_TRICKMODE, GST_SEEK_TYPE_SET, pos, GST_SEEK_TYPE_SET, player->priv->segend); /* Block until state changed */ gst_element_get_state ( player->priv->play, NULL, NULL, GST_CLOCK_TIME_NONE); pt_player_play (player); #else g_warning ("pt_player_fast_forward() is not available on this system"); #endif } /* -------------------- Positioning, speed, volume -------------------------- */ /** * pt_player_jump_relative: * @player: a #PtPlayer * @milliseconds: time in milliseconds to jump * * Skips @milliseconds in stream. A positive value means jumping ahead. If the * resulting position would be beyond the end of stream (or selection), it goes * to the end of stream (or selection). A negative value means jumping back. * If the resulting position would be negative (or before the selection), it * jumps to position 0:00 (or to the start of the selection). */ void pt_player_jump_relative (PtPlayer *player, gint milliseconds) { g_return_if_fail (PT_IS_PLAYER (player)); if (milliseconds == 0) return; gint64 pos, new; if (!pt_player_query_position (player, &pos)) return; new = pos + GST_MSECOND * (gint64) milliseconds; g_debug ("jump relative:\n" "dur = %" G_GINT64_FORMAT "\n" "new = %" G_GINT64_FORMAT, player->priv->dur, new); if (new > player->priv->segend) new = player->priv->segend; if (new < player->priv->segstart) new = player->priv->segstart; pt_player_seek (player, new); } /** * pt_player_jump_to_position: * @player: a #PtPlayer * @milliseconds: position in milliseconds * * Jumps to a given position in stream. The position is given in @milliseconds * starting from position 0:00. A position beyond the duration of stream (or * outside the selection) is ignored. */ void pt_player_jump_to_position (PtPlayer *player, gint milliseconds) { g_return_if_fail (PT_IS_PLAYER (player)); gint64 pos; pos = GST_MSECOND * (gint64) milliseconds; if (pos > player->priv->segend || pos < player->priv->segstart) { g_debug ("jump to position failed\n" "start = %" G_GINT64_FORMAT "\n" "pos = %" G_GINT64_FORMAT "\n" "end = %" G_GINT64_FORMAT, player->priv->segstart, pos, player->priv->segend); return; } pt_player_seek (player, pos); } /** * pt_player_jump_to_permille: * @player: a #PtPlayer * @permille: scale position between 0 and 1000 * * This is used for scale widgets. Start of stream is at 0, end of stream is * at 1000. This will jump to the given position. If your widget uses a different * scale, it's up to you to convert it to 1/1000. Values beyond 1000 are not * allowed, values outside the selection are ignored. */ void pt_player_jump_to_permille (PtPlayer *player, guint permille) { g_return_if_fail (PT_IS_PLAYER (player)); g_return_if_fail (permille <= 1000); gint64 new; new = player->priv->dur * (gint64) permille / 1000; if (new > player->priv->segend || new < player->priv->segstart) return; pt_player_seek (player, new); } /** * pt_player_get_permille: * @player: a #PtPlayer * * This is used for scale widgets. If the scale has to synchronize with the * current position in stream, this gives the position on a scale between 0 and * 1000. * * Failure in querying the position returns -1. * * Return value: a scale position between 0 and 1000 or -1 on failure */ gint pt_player_get_permille (PtPlayer *player) { g_return_val_if_fail (PT_IS_PLAYER (player), -1); gint64 pos; if (!pt_player_query_position (player, &pos)) return -1; return (gfloat) pos / (gfloat) player->priv->dur * 1000; } /** * pt_player_set_speed: * @player: a #PtPlayer * @speed: speed * * Sets the speed of playback in the paused state as well as during playback. * Normal speed is 1.0, everything above that is faster, everything below slower. * A speed of 0 is not allowed, use pt_player_pause() instead. * Recommended speed is starting from 0.5 as quality is rather poor below that. * Parlatype doesn't change the pitch during slower or faster playback. * * Note: If you want to change the speed during playback, you have to use this * method. Changing the "speed" property of PtPlayer, will take effect only * later. */ void pt_player_set_speed (PtPlayer *player, gdouble speed) { g_return_if_fail (PT_IS_PLAYER (player)); g_return_if_fail (speed > 0); gint64 pos; if (!pt_player_query_position (player, &pos)) return; player->priv->speed = speed; g_object_notify_by_pspec (G_OBJECT (player), obj_properties[PROP_SPEED]); pt_player_seek (player, pos); } /** * pt_player_set_volume: * @player: a #PtPlayer * @volume: volume * * Sets the volume on a scale between 0 and 1. Instead of using this method * you could set the "volume" property. */ void pt_player_set_volume (PtPlayer *player, gdouble volume) { g_return_if_fail (PT_IS_PLAYER (player)); g_return_if_fail (volume >= 0 && volume <= 1); gst_stream_volume_set_volume (GST_STREAM_VOLUME (player->priv->play), GST_STREAM_VOLUME_FORMAT_CUBIC, volume); player->priv->volume = volume; g_object_notify_by_pspec (G_OBJECT (player), obj_properties[PROP_VOLUME]); } /** * pt_player_mute_volume: * @player: a #PtPlayer * @mute: a gboolean * * Mute the player (with TRUE) or set it back to normal volume (with FALSE). * This remembers the volume level, so you don't have to keep track of the old value. */ void pt_player_mute_volume (PtPlayer *player, gboolean mute) { g_return_if_fail (PT_IS_PLAYER (player)); gst_stream_volume_set_mute (GST_STREAM_VOLUME (player->priv->play), mute); } /** * pt_player_get_position: * @player: a #PtPlayer * * Returns the current position in stream. * * Return value: position in milliseconds or -1 on failure */ gint64 pt_player_get_position (PtPlayer *player) { g_return_val_if_fail (PT_IS_PLAYER (player), -1); gint64 time; if (!pt_player_query_position (player, &time)) return -1; return GST_TIME_AS_MSECONDS (time); } /** * pt_player_get_duration: * @player: a #PtPlayer * * Returns the duration of stream. * * Return value: duration in milliseconds */ gint64 pt_player_get_duration (PtPlayer *player) { g_return_val_if_fail (PT_IS_PLAYER (player), -1); return GST_TIME_AS_MSECONDS (player->priv->dur); } /* ------------------------- Waveform stuff --------------------------------- */ /** * pt_player_get_data: * @player: a #PtPlayer * @pps: the requested pixel per second ratio * * Returns wave data needed for visual representation as raw data. The * requested resolution is given as pixel per seconds, e.g. 100 means one second * is represented by 100 samples, is 100 pixels wide. The returned resolution * doesn't have to be necessarily exactly the requested resolution, it might be * a bit differnt, depending on the bit rate. * * Return value: (transfer full): the #PtWavedata */ PtWavedata* pt_player_get_data (PtPlayer *player, gint pps) { return pt_waveloader_get_data (player->priv->wl, pps); } /* --------------------- File utilities ------------------------------------- */ /** * pt_player_get_uri: * @player: a #PtPlayer * * Returns the URI of the currently open file or NULL if it can't be determined. * * Return value: (transfer full): the uri */ gchar* pt_player_get_uri (PtPlayer *player) { g_return_val_if_fail (PT_IS_PLAYER (player), NULL); gchar *uri = NULL; GFile *file = NULL; file = pt_player_get_file (player); if (file) { uri = g_file_get_uri (file); g_object_unref (file); } return uri; } /** * pt_player_get_filename: * @player: a #PtPlayer * * Returns the display name of the currently open file or NULL if it can't be determined. * * Return value: (transfer full): the file name */ gchar* pt_player_get_filename (PtPlayer *player) { g_return_val_if_fail (PT_IS_PLAYER (player), NULL); GError *error = NULL; const gchar *filename = NULL; GFile *file = NULL; GFileInfo *info = NULL; gchar *result; file = pt_player_get_file (player); if (file) info = g_file_query_info ( file, G_FILE_ATTRIBUTE_STANDARD_DISPLAY_NAME, G_FILE_QUERY_INFO_NONE, NULL, &error); else return NULL; if (error) { g_printerr ("%s\n", error->message); g_error_free (error); g_object_unref (file); return NULL; } filename = g_file_info_get_attribute_string ( info, G_FILE_ATTRIBUTE_STANDARD_DISPLAY_NAME); if (filename) result = g_strdup (filename); else result = NULL; if (info) g_object_unref (info); if (file) g_object_unref (file); return result; } /* --------------------- Time strings and timestamps ------------------------ */ /** * pt_player_get_time_string: * @time: time in milliseconds to converse * @duration: duration of stream in milliseconds (max time) * @precision: a #PtPrecisionType * * Returns the given time as a string for display to the user. Format type is * determined by @duration, e.g. if duration is long format, it returns a string * in long format, too. * * Return value: (transfer full): the time string */ gchar* pt_player_get_time_string (gint time, gint duration, PtPrecisionType precision) { /* Don't assert time <= duration because duration is not exact */ g_return_val_if_fail (precision < PT_PRECISION_INVALID, NULL); gchar *result; gint h, m, s, ms, mod; h = time / 3600000; mod = time % 3600000; m = mod / 60000; ms = time % 60000; s = ms / 1000; ms = ms % 1000; /* Short or long format depends on total duration */ if (duration >= ONE_HOUR) { switch (precision) { case PT_PRECISION_SECOND: /* Translators: This is a time format, like "2:05:30" for 2 hours, 5 minutes, and 30 seconds. You may change ":" to the separator that your locale uses or use "%Id" instead of "%d" if your locale uses localized digits. */ result = g_strdup_printf (C_("long time format", "%d:%02d:%02d"), h, m, s); break; case PT_PRECISION_SECOND_10TH: /* Translators: This is a time format, like "2:05:30.1" for 2 hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may change ":" or "." to the separator that your locale uses or use "%Id" instead of "%d" if your locale uses localized digits. */ result = g_strdup_printf (C_("long time format, 1 digit", "%d:%02d:%02d.%d"), h, m, s, ms / 100); break; case PT_PRECISION_SECOND_100TH: /* Translators: This is a time format, like "2:05:30.12" for 2 hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may change ":" or "." to the separator that your locale uses or use "%Id" instead of "%d" if your locale uses localized digits. */ result = g_strdup_printf (C_("long time format, 2 digits", "%d:%02d:%02d.%02d"), h, m, s, ms / 10); break; default: g_return_val_if_reached (NULL); break; } return result; } if (duration >= TEN_MINUTES) { switch (precision) { case PT_PRECISION_SECOND: /* Translators: This is a time format, like "05:30" for 5 minutes, and 30 seconds. You may change ":" to the separator that your locale uses or use "%I02d" instead of "%02d" if your locale uses localized digits. */ result = g_strdup_printf (C_("short time format", "%02d:%02d"), m, s); break; case PT_PRECISION_SECOND_10TH: /* Translators: This is a time format, like "05:30.1" for 5 minutes, 30 seconds, and 1 tenthsecond. You may change ":" or "." to the separator that your locale uses or use "%Id" instead of "%d" if your locale uses localized digits. */ result = g_strdup_printf (C_("short time format, 1 digit", "%02d:%02d.%d"), m, s, ms / 100); break; case PT_PRECISION_SECOND_100TH: /* Translators: This is a time format, like "05:30.12" for 5 minutes, 30 seconds, and 12 hundrethseconds. You may change ":" or "." to the separator that your locale uses or use "%Id" instead of "%d" if your locale uses localized digits. */ result = g_strdup_printf (C_("short time format, 2 digits", "%02d:%02d.%02d"), m, s, ms / 10); break; default: g_return_val_if_reached (NULL); break; } } else { switch (precision) { case PT_PRECISION_SECOND: /* Translators: This is a time format, like "5:30" for 5 minutes, and 30 seconds. You may change ":" to the separator that your locale uses or use "%Id" instead of "%d" if your locale uses localized digits. */ result = g_strdup_printf (C_("shortest time format", "%d:%02d"), m, s); break; case PT_PRECISION_SECOND_10TH: /* Translators: This is a time format, like "05:30.1" for 5 minutes, 30 seconds, and 1 tenthsecond. You may change ":" or "." to the separator that your locale uses or use "%Id" instead of "%d" if your locale uses localized digits. */ result = g_strdup_printf (C_("shortest time format, 1 digit", "%d:%02d.%d"), m, s, ms / 100); break; case PT_PRECISION_SECOND_100TH: /* Translators: This is a time format, like "05:30.12" for 5 minutes, 30 seconds, and 12 hundrethseconds. You may change ":" or "." to the separator that your locale uses or use "%Id" instead of "%d" if your locale uses localized digits. */ result = g_strdup_printf (C_("shortest time format, 2 digits", "%d:%02d.%02d"), m, s, ms / 10); break; default: g_return_val_if_reached (NULL); break; } } return result; } /** * pt_player_get_current_time_string: * @player: a #PtPlayer * @precision: a #PtPrecisionType * * Returns the current position of the stream as a string for display to the user. * * If the current position can not be determined, NULL is returned. * * Return value: (transfer full): the time string */ gchar* pt_player_get_current_time_string (PtPlayer *player, PtPrecisionType precision) { g_return_val_if_fail (PT_IS_PLAYER (player), NULL); g_return_val_if_fail (precision < PT_PRECISION_INVALID, NULL); gint64 time; if (!pt_player_query_position (player, &time)) return NULL; return pt_player_get_time_string ( GST_TIME_AS_MSECONDS (time), GST_TIME_AS_MSECONDS (player->priv->dur), precision); } /** * pt_player_get_duration_time_string: * @player: a #PtPlayer * @precision: a #PtPrecisionType * * Returns the duration of the stream as a string for display to the user. * * If the duration can not be determined, NULL is returned. * * Return value: (transfer full): the time string */ gchar* pt_player_get_duration_time_string (PtPlayer *player, PtPrecisionType precision) { g_return_val_if_fail (PT_IS_PLAYER (player), NULL); g_return_val_if_fail (precision < PT_PRECISION_INVALID, NULL); return pt_player_get_time_string ( GST_TIME_AS_MSECONDS (player->priv->dur), GST_TIME_AS_MSECONDS (player->priv->dur), precision); } /** * pt_player_get_timestamp: * @player: a #PtPlayer * * Returns the current timestamp as a string. The format of timestamps can not be changed. * * If the current position can not be determined, NULL is returned. * * Return value: (transfer full): the timestamp */ gchar* pt_player_get_timestamp (PtPlayer *player) { g_return_val_if_fail (PT_IS_PLAYER (player), NULL); gint64 time; gint duration; gint h, m, s, ms, mod; gchar *timestamp; if (!pt_player_query_position (player, &time)) return NULL; timestamp = NULL; time = GST_TIME_AS_MSECONDS (time); duration = GST_TIME_AS_MSECONDS (player->priv->dur); /* This is the same code as in pt_player_get_timestring() */ h = time / 3600000; mod = time % 3600000; m = mod / 60000; ms = time % 60000; s = ms / 1000; ms = ms % 1000; if (duration >= ONE_HOUR) { timestamp = g_strdup_printf ("#%d:%02d:%02d.%d#", h, m, s, ms / 100); } else { timestamp = g_strdup_printf ("#%d:%02d.%d#", m, s, ms / 100); } return timestamp; } static gint pt_player_get_timestamp_position (PtPlayer *player, gchar *timestamp) { gint h, m, s, digit, args, result; gchar *cmp = NULL; gchar **split = NULL; if (!g_regex_match_simple ("^#?[0-9]+:[0-9][0-9]:[0-9][0-9]\\.[0-9]#?$", timestamp, 0, 0) && !g_regex_match_simple ("^#?[0-9]+:[0-9][0-9]\\.[0-9]#?$", timestamp, 0, 0)) { return -1; } if (g_str_has_prefix (timestamp, "#")) { split = g_strsplit (timestamp, "#", -1); if (split[1]) { cmp = g_strdup (split[1]); } if (split) { g_strfreev (split); } if (!cmp) { return -1; } } else { cmp = g_strdup (timestamp); } args = sscanf (cmp, "%d:%02d:%02d.%01d", &h, &m, &s, &digit); if (args != 4) { h = 0; args = sscanf (cmp, "%d:%02d.%01d", &m, &s, &digit); if (args != 3) { g_free (cmp); return -1; } } g_free (cmp); if (s > 59 || m > 59) return -1; result = ((h * 3600 + m * 60 + s) * 10 + digit ) * 100; if (GST_MSECOND * (gint64) result > player->priv->dur) return -1; return result; } /** * pt_player_string_is_timestamp: * @player: a #PtPlayer * @timestamp: the string to be checked * * Returns whether the given string is a valid timestamp. * * See also pt_player_goto_timestamp() if you want to go to the timestamp's * position immediately after. * * Return value: TRUE if the timestamp is valid, FALSE if not */ gboolean pt_player_string_is_timestamp (PtPlayer *player, gchar *timestamp) { g_return_val_if_fail (PT_IS_PLAYER (player), FALSE); g_return_val_if_fail (timestamp != NULL, FALSE); return (pt_player_get_timestamp_position (player, timestamp) != -1); } /** * pt_player_goto_timestamp: * @player: a #PtPlayer * @timestamp: the timestamp to go to * * Goes to the position of the timestamp. Returns false, if it's not a * valid timestamp. * * Return value: TRUE on success, FALSE if the timestamp is not valid */ gboolean pt_player_goto_timestamp (PtPlayer *player, gchar *timestamp) { g_return_val_if_fail (PT_IS_PLAYER (player), FALSE); g_return_val_if_fail (timestamp != NULL, FALSE); gint pos; pos = pt_player_get_timestamp_position (player, timestamp); if (pos == -1) return FALSE; pt_player_jump_to_position (player, pos); return TRUE; } /* --------------------- Init and GObject management ------------------------ */ static void pt_player_init (PtPlayer *player) { player->priv = pt_player_get_instance_private (player); } static gboolean notify_volume_idle_cb (PtPlayer *player) { gdouble vol; vol = gst_stream_volume_get_volume (GST_STREAM_VOLUME (player->priv->play), GST_STREAM_VOLUME_FORMAT_CUBIC); player->priv->volume = vol; g_object_notify_by_pspec (G_OBJECT (player), obj_properties[PROP_VOLUME]); return FALSE; } static void vol_changed (GObject *object, GParamSpec *pspec, PtPlayer *player) { /* This is taken from Totem's bacon-video-widget.c Changing the property immediately will crash, it has to be an idle source */ guint id; id = g_idle_add ((GSourceFunc) notify_volume_idle_cb, player); g_source_set_name_by_id (id, "[parlatype] notify_volume_idle_cb"); } static gboolean pt_player_initable_init (GInitable *initable, GCancellable *cancellable, GError **error) { GError *gst_error = NULL; PtPlayer *player; player = PT_PLAYER (initable); /* Setup player We use the scaletempo plugin from "good plugins" with playbin, setting its audio-filter to scaletempo: playbin ! capsfilter ! autoaudiosink Playbin's property "audio-filter" was introduced in GStreamer 1.3, for older versions we use: playbin ! capsfilter ! scaletempo ! audioconvert ! audioresample ! autoaudiosink */ gst_init_check (NULL, NULL, &gst_error); if (gst_error) { g_propagate_error (error, gst_error); return FALSE; } /* Create gstreamer elements */ player->priv->play = NULL; GstElement *scaletempo = NULL; GstElement *capsfilter = NULL; GstElement *audiosink = NULL; #if GST_CHECK_VERSION(1,3,0) #else GstElement *audioconvert = NULL; GstElement *audioresample = NULL; audioconvert = gst_element_factory_make ("audioconvert", "audioconvert"); audioresample = gst_element_factory_make ("audioresample", "audioresample"); #endif player->priv->play = gst_element_factory_make ("playbin", "play"); scaletempo = gst_element_factory_make ("scaletempo", "tempo"); capsfilter = gst_element_factory_make ("capsfilter", "audiofilter"); audiosink = gst_element_factory_make ("autoaudiosink", "audiosink"); /* checks */ #if GST_CHECK_VERSION(1,3,0) if (!player->priv->play || !scaletempo || !capsfilter || !audiosink) { #else if (!player->priv->play || !scaletempo || !capsfilter || !audioconvert || !audioresample || !audiosink) { #endif g_set_error (error, GST_CORE_ERROR, GST_CORE_ERROR_MISSING_PLUGIN, _("Failed to load a plugin.")); return FALSE; } /* create audio output */ GstElement *audio = gst_bin_new ("audiobin"); #if GST_CHECK_VERSION(1,3,0) gst_bin_add_many (GST_BIN (audio), capsfilter, audiosink, NULL); gst_element_link_many (capsfilter, audiosink, NULL); #else gst_bin_add_many (GST_BIN (audio), capsfilter, scaletempo, audioconvert, audioresample, audiosink, NULL); gst_element_link_many (capsfilter, scaletempo, audioconvert, audioresample, audiosink, NULL); #endif /* create ghost pad for audiosink */ GstPad *audiopad = gst_element_get_static_pad (capsfilter, "sink"); gst_element_add_pad (audio, gst_ghost_pad_new ("sink", audiopad)); gst_object_unref (GST_OBJECT (audiopad)); g_object_set (player->priv->play, "audio-sink", audio, NULL); #if GST_CHECK_VERSION(1,3,0) g_object_set (player->priv->play, "audio-filter", scaletempo, NULL); #endif g_signal_connect (G_OBJECT (player->priv->play), "notify::volume", G_CALLBACK (vol_changed), player); return TRUE; } static void pt_player_dispose (GObject *object) { PtPlayer *player; player = PT_PLAYER (object); if (player->priv->play) { /* remember position */ metadata_save_position (player); gst_element_set_state (player->priv->play, GST_STATE_NULL); gst_object_unref (GST_OBJECT (player->priv->play)); player->priv->play = NULL; remove_message_bus (player); } g_clear_object (&player->priv->wl); G_OBJECT_CLASS (pt_player_parent_class)->dispose (object); } static void pt_player_set_property (GObject *object, guint property_id, const GValue *value, GParamSpec *pspec) { PtPlayer *player; player = PT_PLAYER (object); gdouble tmp; switch (property_id) { case PROP_SPEED: player->priv->speed = g_value_get_double (value); break; case PROP_VOLUME: tmp = g_value_get_double (value); if (player->priv->play) gst_stream_volume_set_volume (GST_STREAM_VOLUME (player->priv->play), GST_STREAM_VOLUME_FORMAT_CUBIC, tmp); player->priv->volume = tmp; break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, property_id, pspec); break; } } static void pt_player_get_property (GObject *object, guint property_id, GValue *value, GParamSpec *pspec) { PtPlayer *player; player = PT_PLAYER (object); switch (property_id) { case PROP_SPEED: g_value_set_double (value, player->priv->speed); break; case PROP_VOLUME: g_value_set_double (value, player->priv->volume); break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, property_id, pspec); break; } } static void pt_player_class_init (PtPlayerClass *klass) { G_OBJECT_CLASS (klass)->set_property = pt_player_set_property; G_OBJECT_CLASS (klass)->get_property = pt_player_get_property; G_OBJECT_CLASS (klass)->dispose = pt_player_dispose; /** * PtPlayer::load-progress: * @player: the player emitting the signal * @progress: the new progress state, ranging from 0.0 to 1.0 * * Indicates progress on a scale from 0.0 to 1.0, however it does not * emit the value 0.0 nor 1.0. Wait for a TRUE player-state-changed * signal or an error signal to dismiss a gui element showing progress. */ g_signal_new ("load-progress", PT_TYPE_PLAYER, G_SIGNAL_RUN_FIRST, 0, NULL, NULL, g_cclosure_marshal_VOID__DOUBLE, G_TYPE_NONE, 1, G_TYPE_DOUBLE); /** * PtPlayer::end-of-stream: * @player: the player emitting the signal * * The #PtPlayer::end-of-stream signal is emitted when the stream is at its end * or when the end of selection is reached. */ g_signal_new ("end-of-stream", PT_TYPE_PLAYER, G_SIGNAL_RUN_FIRST, 0, NULL, NULL, g_cclosure_marshal_VOID__VOID, G_TYPE_NONE, 0); /** * PtPlayer::error: * @player: the player emitting the signal * @error: a GError * * The #PtPlayer::error signal is emitted on errors opening the file or during * playback. It's a severe error and the player is always reset. */ g_signal_new ("error", PT_TYPE_PLAYER, G_SIGNAL_RUN_FIRST, 0, NULL, NULL, g_cclosure_marshal_VOID__BOXED, G_TYPE_NONE, 1, G_TYPE_ERROR); /** * PtPlayer:speed: * * The speed for playback. */ obj_properties[PROP_SPEED] = g_param_spec_double ( "speed", "Speed of playback", "1 is normal speed", 0.1, /* minimum */ 2.0, /* maximum */ 1.0, G_PARAM_READWRITE | G_PARAM_CONSTRUCT); /** * PtPlayer:volume: * * The volume for playback. */ obj_properties[PROP_VOLUME] = g_param_spec_double ( "volume", "Volume of playback", "Volume from 0 to 1", 0.0, /* minimum */ 1.0, /* maximum */ 1.0, G_PARAM_READWRITE | G_PARAM_CONSTRUCT); g_object_class_install_properties ( G_OBJECT_CLASS (klass), N_PROPERTIES, obj_properties); } static void pt_player_initable_iface_init (GInitableIface *iface) { iface->init = pt_player_initable_init; } /** * pt_player_new: * @error: (allow-none): return location for an error, or NULL * * This is a failable constructor. It fails, if GStreamer doesn't init or a * plugin is missing. In this case NULL is returned, error is set. * * After use g_object_unref() it. * * Return value: (transfer full): a new pt_player */ PtPlayer * pt_player_new (GError **error) { return g_initable_new (PT_TYPE_PLAYER, NULL, /* cancellable */ error, NULL); } parlatype-1.5.4/libparlatype/src/pt-wavedata.c0000644000175000017500000000612713176574165016330 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #include #include "pt-wavedata.h" /** * SECTION: pt-wavedata * @short_description: A boxed type with wave data. * @stability: Unstable * @include: parlatype/pt-wavedata.h * * Contains all information needed to show a wave form. It's produced by * #PtPlayer or #PtWaveloader. Pass it to #PtWaveviewer to visualize the wave. * #PtWaveviewer copies the data, you can free it immediately with pt_wavedata_free(). * * There is no need to access the struct members. * * Assuming you have set up a PtPlayer *player, typical usage would be: * |[ * ... * PtWavedata *data; * data = pt_player_get_data (player, 100); * pt_waveviewer_set_wave (PT_WAVEVIEWER (waveviewer), data); * pt_wavedata_free (data); * ... * ]| */ G_DEFINE_BOXED_TYPE (PtWavedata, pt_wavedata, pt_wavedata_copy, pt_wavedata_free); /** * pt_wavedata_copy: (skip) * @data: the object to copy * * Creates a copy of @data. * * Return value: a new #PtWavedata, free after use with pt_wavedata_free() */ PtWavedata* pt_wavedata_copy (PtWavedata *data) { PtWavedata *new; new = g_new0 (PtWavedata, 1); if (!(new->array = g_try_malloc (sizeof (gfloat) * data->length))) { g_debug ("copying wavedata failed"); return data; } memcpy (new->array, data->array, sizeof (gfloat) * new->length); new->length = data->length; new->channels = data->channels; new->px_per_sec = data->px_per_sec; return new; } /** * pt_wavedata_free: (skip) * @data: the object to be freed * * Free's @data. */ void pt_wavedata_free (PtWavedata *data) { g_debug ("pt wavedata free"); if (!data) return; g_free (data->array); g_free (data); } /** * pt_wavedata_new: (constructor) * @array: (array length=length): an array of floats * @length: number of elements in array * @channels: number of channels * @px_per_sec: rate * * Constructs a new #PtWavedata. * * Returns: (transfer full): new data, free after use with pt_wavedata_free() */ PtWavedata* pt_wavedata_new (gfloat *array, gint64 length, guint channels, guint px_per_sec) { g_debug ("pt wavedata new"); PtWavedata *data; data = g_new0 (PtWavedata, 1); if (!(data->array = g_try_malloc (sizeof (gfloat) * length))) { g_debug ("creating new wavedata failed"); return data; } memcpy (data->array, array, sizeof(gfloat) * length); data->length = length; data->channels = channels; data->px_per_sec = px_per_sec; return data; } parlatype-1.5.4/libparlatype/src/pt-wavedata.h0000644000175000017500000000361613200333333016307 00000000000000/* Copyright (C) Gabor Karsay 2016 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #ifndef PT_WAVEDATA_H #define PT_WAVEDATA_H #include #include #define PT_TYPE_WAVEDATA (pt_wavedata_get_type ()) typedef struct _PtWavedata PtWavedata; /** * PtWavedata: * @array: (array length=length): array of min/max values. One single sample is * represented by a min value ranging from -1.0 to 0.0 and a max value ranging * from 0.0 to 1.0. This is a simplified approach, as a sample is not a single * point in time, but a min and a max value in a certain amount of time, e.g. * 10 ms. * @length: number of elements in array * @channels: number of channels for future use, currently it's always 1. * @px_per_sec: pixels/samples per second. For example 100 means one second in time * is 100 pixels wide. * * Contains all information about the wave. Usually you don't have to access * the struct's members. */ struct _PtWavedata { gfloat *array; gint64 length; guint channels; guint px_per_sec; }; GType pt_wavedata_get_type (void) G_GNUC_CONST; PtWavedata* pt_wavedata_copy (PtWavedata *data); void pt_wavedata_free (PtWavedata *data); PtWavedata* pt_wavedata_new (gfloat *array, gint64 length, guint channels, guint px_per_sec); #endif parlatype-1.5.4/libparlatype/src/pt-waveviewer-cursor.h0000644000175000017500000000403613202143651020213 00000000000000/* Copyright (C) Gabor Karsay 2017 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #ifndef PT_WAVEVIEWER_CURSOR_H #define PT_WAVEVIEWER_CURSOR_H #include G_BEGIN_DECLS #define PT_TYPE_WAVEVIEWER_CURSOR (pt_waveviewer_cursor_get_type ()) #define PT_WAVEVIEWER_CURSOR(obj) (G_TYPE_CHECK_INSTANCE_CAST ((obj), PT_TYPE_WAVEVIEWER_CURSOR, PtWaveviewerCursor)) #define PT_IS_WAVEVIEWER_CURSOR(obj) (G_TYPE_CHECK_INSTANCE_TYPE ((obj), PT_TYPE_WAVEVIEWER_CURSOR)) #define PT_WAVEVIEWER_CURSOR_CLASS(klass) (G_TYPE_CHECK_CLASS_CAST ((klass), PT_TYPE_WAVEVIEWER_CURSOR, PtWaveviewerCursorClass)) #define PT_IS_WAVEVIEWER_CURSOR_CLASS(obj) (G_TYPE_CHECK_CLASS_TYPE ((klass), PT_TYPE_WAVEVIEWER_CURSOR)) typedef struct _PtWaveviewerCursor PtWaveviewerCursor; typedef struct _PtWaveviewerCursorClass PtWaveviewerCursorClass; typedef struct _PtWaveviewerCursorPrivate PtWaveviewerCursorPrivate; struct _PtWaveviewerCursor { GtkDrawingArea parent; /*< private > */ PtWaveviewerCursorPrivate *priv; }; struct _PtWaveviewerCursorClass { GtkDrawingAreaClass klass; }; GType pt_waveviewer_cursor_get_type (void) G_GNUC_CONST; void pt_waveviewer_cursor_render (PtWaveviewerCursor *self, gint position); void pt_waveviewer_cursor_set_focus (PtWaveviewerCursor *self, gboolean focus); GtkWidget *pt_waveviewer_cursor_new (void); G_END_DECLS #endif // PT_WAVEVIEWER_CURSOR_H parlatype-1.5.4/libparlatype/src/pt-waveviewer-waveform.h0000644000175000017500000000402713200427162020524 00000000000000/* Copyright (C) Gabor Karsay 2017 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #ifndef PT_WAVEVIEWER_WAVEFORM_H #define PT_WAVEVIEWER_WAVEFORM_H #include G_BEGIN_DECLS #define PT_TYPE_WAVEVIEWER_WAVEFORM (pt_waveviewer_waveform_get_type ()) #define PT_WAVEVIEWER_WAVEFORM(obj) (G_TYPE_CHECK_INSTANCE_CAST ((obj), PT_TYPE_WAVEVIEWER_WAVEFORM, PtWaveviewerWaveform)) #define PT_IS_WAVEVIEWER_WAVEFORM(obj) (G_TYPE_CHECK_INSTANCE_TYPE ((obj), PT_TYPE_WAVEVIEWER_WAVEFORM)) #define PT_WAVEVIEWER_WAVEFORM_CLASS(klass) (G_TYPE_CHECK_CLASS_CAST ((klass), PT_TYPE_WAVEVIEWER_WAVEFORM, PtWaveviewerWaveformClass)) #define PT_IS_WAVEVIEWER_WAVEFORM_CLASS(obj) (G_TYPE_CHECK_CLASS_TYPE ((klass), PT_TYPE_WAVEVIEWER_WAVEFORM)) typedef struct _PtWaveviewerWaveform PtWaveviewerWaveform; typedef struct _PtWaveviewerWaveformClass PtWaveviewerWaveformClass; typedef struct _PtWaveviewerWaveformPrivate PtWaveviewerWaveformPrivate; struct _PtWaveviewerWaveform { GtkDrawingArea parent; /*< private > */ PtWaveviewerWaveformPrivate *priv; }; struct _PtWaveviewerWaveformClass { GtkDrawingAreaClass klass; }; GType pt_waveviewer_waveform_get_type (void) G_GNUC_CONST; void pt_waveviewer_waveform_set (PtWaveviewerWaveform *self, gfloat *peaks, gint64 peaks_size); GtkWidget *pt_waveviewer_waveform_new (void); G_END_DECLS #endif // PT_WAVEVIEWER_WAVEFORM_H parlatype-1.5.4/libparlatype/src/Makefile.am0000644000175000017500000000677713202144671015777 00000000000000lib_LTLIBRARIES = libparlatype.la resource_xml = $(srcdir)/resources/libparlatype.gresource.xml resource_files = $(shell glib-compile-resources --sourcedir=$(srcdir)/resources --generate-dependencies $(resource_xml)) pt-resources.c: $(resource_xml) $(resource_files) $(AM_V_GEN)glib-compile-resources \ --target=$@ \ --sourcedir=$(srcdir)/resources \ --generate-source \ --c-name parlatype $(resource_xml) pt-resources.h: $(resource_xml) $(resource_files) $(AM_V_GEN)glib-compile-resources \ --target=$@ \ --sourcedir=$(srcdir)/resources \ --generate-header \ --c-name parlatype $(resource_xml) BUILT_SOURCES = \ pt-resources.c \ pt-resources.h \ $(NULL) libparlatype_la_SOURCES = \ $(BUILT_SOURCES) \ pt-player.c \ pt-progress-dialog.c \ pt-wavedata.c \ pt-waveloader.c \ pt-waveviewer.c \ pt-waveviewer-cursor.c \ pt-waveviewer-cursor.h \ pt-waveviewer-focus.c \ pt-waveviewer-focus.h \ pt-waveviewer-ruler.c \ pt-waveviewer-ruler.h \ pt-waveviewer-selection.c \ pt-waveviewer-selection.h \ pt-waveviewer-waveform.c \ pt-waveviewer-waveform.h parlatype_includedir= \ $(includedir)/parlatype parlatype_include_HEADERS = \ pt-player.h \ pt-progress-dialog.h \ pt-wavedata.h \ pt-waveloader.h \ pt-waveviewer.h AM_CPPFLAGS = \ $(CODE_COVERAGE_CFLAGS) \ $(WARNINGCFLAGS) \ $(GTK_CFLAGS) \ $(GSTREAMER_CFLAGS) libparlatype_la_LDFLAGS = \ -version-info $(PARLATYPE_SO_VERSION) \ -export-symbols $(top_srcdir)/src/libparlatype.symbols \ -export-dynamic libparlatype_la_LIBADD = \ $(CODE_COVERAGE_LIBS) \ $(GTK_LIBS) \ $(GSTREAMER_LIBS) ## The generated configuration header is installed in its own subdirectory of ## $(libdir). The reason for this is that the configuration information put ## into this header file describes the target platform the installed library ## has been built for. Thus the file must not be installed into a location ## intended for architecture-independent files, as defined by the Filesystem ## Hierarchy Standard (FHS). ## The nodist_ prefix instructs Automake to not generate rules for including ## the listed files in the distribution on 'make dist'. Files that are listed ## in _HEADERS variables are normally included in the distribution, but the ## configuration header file is generated at configure time and should not be ## shipped with the source tarball. parlatype_libincludedir = \ $(libdir)/parlatype #nodist_parlatype_libinclude_HEADERS = xxx.h -include $(INTROSPECTION_MAKEFILE) INTROSPECTION_GIRS = INTROSPECTION_SCANNER_ARGS = --add-include-path=$(srcdir) --warn-all --symbol-prefix=pt --identifier-prefix=Pt #--accept-unprefixed INTROSPECTION_COMPILER_ARGS = --includedir=$(srcdir) if HAVE_INTROSPECTION # introspection sources without built sources, so not using # $(libparlatype_la_SOURCES) introspection_sources = \ pt-player.c \ pt-progress-dialog.c \ pt-wavedata.c \ pt-waveloader.c \ pt-waveviewer.c \ $(parlatype_include_HEADERS) Parlatype-1.0.gir: libparlatype.la Parlatype_1_0_gir_INCLUDES = GObject-2.0 Gtk-3.0 Parlatype_1_0_gir_CFLAGS = \ -I$(top_srcdir) \ $(INCLUDES) Parlatype_1_0_gir_LIBS = libparlatype.la Parlatype_1_0_gir_FILES = $(introspection_sources) INTROSPECTION_GIRS += Parlatype-1.0.gir girdir = $(datadir)/gir-1.0 gir_DATA = $(INTROSPECTION_GIRS) typelibdir = $(libdir)/girepository-1.0 typelib_DATA = $(INTROSPECTION_GIRS:.gir=.typelib) CLEANFILES = $(gir_DATA) $(typelib_DATA) $(BUILT_SOURCES) endif EXTRA_DIST = \ $(resource_files) \ $(resource_xml) \ libparlatype.symbols parlatype-1.5.4/libparlatype/docs/0000755000175000017500000000000013204324044014137 500000000000000parlatype-1.5.4/libparlatype/docs/reference/0000755000175000017500000000000013204324053016075 500000000000000parlatype-1.5.4/libparlatype/docs/reference/version.xml.in0000644000175000017500000000002213171727132020633 00000000000000@PACKAGE_VERSION@ parlatype-1.5.4/libparlatype/docs/reference/Makefile.in0000644000175000017500000012513513204324033020067 00000000000000# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # -*- mode: makefile -*- #################################### # Everything below here is generic # #################################### VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(top_srcdir)/gtk-doc.make $(srcdir)/Makefile.in \ $(srcdir)/Makefile.am $(srcdir)/version.xml.in \ $(top_srcdir)/test-driver subdir = docs/reference ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_code_coverage.m4 \ $(top_srcdir)/m4/ax_valgrind_check.m4 \ $(top_srcdir)/m4/glibtests.m4 $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = version.xml CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__extra_recursive_targets = check-valgrind-recursive \ check-valgrind-memcheck-recursive \ check-valgrind-helgrind-recursive check-valgrind-drd-recursive \ check-valgrind-sgcheck-recursive am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) am__tty_colors_dummy = \ mgn= red= grn= lgn= blu= brg= std=; \ am__color_tests=no am__tty_colors = { \ $(am__tty_colors_dummy); \ if test "X$(AM_COLOR_TESTS)" = Xno; then \ am__color_tests=no; \ elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ am__color_tests=yes; \ elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ am__color_tests=yes; \ fi; \ if test $$am__color_tests = yes; then \ red=''; \ grn=''; \ lgn=''; \ blu=''; \ mgn=''; \ brg=''; \ std=''; \ fi; \ } am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__recheck_rx = ^[ ]*:recheck:[ ]* am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* # A command that, given a newline-separated list of test names on the # standard input, print the name of the tests that are to be re-run # upon "make recheck". am__list_recheck_tests = $(AWK) '{ \ recheck = 1; \ while ((rc = (getline line < ($$0 ".trs"))) != 0) \ { \ if (rc < 0) \ { \ if ((getline line2 < ($$0 ".log")) < 0) \ recheck = 0; \ break; \ } \ else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ { \ recheck = 0; \ break; \ } \ else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ { \ break; \ } \ }; \ if (recheck) \ print $$0; \ close ($$0 ".trs"); \ close ($$0 ".log"); \ }' # A command that, given a newline-separated list of test names on the # standard input, create the global log from their .trs and .log files. am__create_global_log = $(AWK) ' \ function fatal(msg) \ { \ print "fatal: making $@: " msg | "cat >&2"; \ exit 1; \ } \ function rst_section(header) \ { \ print header; \ len = length(header); \ for (i = 1; i <= len; i = i + 1) \ printf "="; \ printf "\n\n"; \ } \ { \ copy_in_global_log = 1; \ global_test_result = "RUN"; \ while ((rc = (getline line < ($$0 ".trs"))) != 0) \ { \ if (rc < 0) \ fatal("failed to read from " $$0 ".trs"); \ if (line ~ /$(am__global_test_result_rx)/) \ { \ sub("$(am__global_test_result_rx)", "", line); \ sub("[ ]*$$", "", line); \ global_test_result = line; \ } \ else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ copy_in_global_log = 0; \ }; \ if (copy_in_global_log) \ { \ rst_section(global_test_result ": " $$0); \ while ((rc = (getline line < ($$0 ".log"))) != 0) \ { \ if (rc < 0) \ fatal("failed to read from " $$0 ".log"); \ print line; \ }; \ printf "\n"; \ }; \ close ($$0 ".trs"); \ close ($$0 ".log"); \ }' # Restructured Text title. am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } # Solaris 10 'make', and several other traditional 'make' implementations, # pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it # by disabling -e (using the XSI extension "set +e") if it's set. am__sh_e_setup = case $$- in *e*) set +e;; esac # Default flags passed to test drivers. am__common_driver_flags = \ --color-tests "$$am__color_tests" \ --enable-hard-errors "$$am__enable_hard_errors" \ --expect-failure "$$am__expect_failure" # To be inserted before the command running the test. Creates the # directory for the log if needed. Stores in $dir the directory # containing $f, in $tst the test, in $log the log. Executes the # developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and # passes TESTS_ENVIRONMENT. Set up options for the wrapper that # will run the test scripts (or their associated LOG_COMPILER, if # thy have one). am__check_pre = \ $(am__sh_e_setup); \ $(am__vpath_adj_setup) $(am__vpath_adj) \ $(am__tty_colors); \ srcdir=$(srcdir); export srcdir; \ case "$@" in \ */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ *) am__odir=.;; \ esac; \ test "x$$am__odir" = x"." || test -d "$$am__odir" \ || $(MKDIR_P) "$$am__odir" || exit $$?; \ if test -f "./$$f"; then dir=./; \ elif test -f "$$f"; then dir=; \ else dir="$(srcdir)/"; fi; \ tst=$$dir$$f; log='$@'; \ if test -n '$(DISABLE_HARD_ERRORS)'; then \ am__enable_hard_errors=no; \ else \ am__enable_hard_errors=yes; \ fi; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ am__expect_failure=yes;; \ *) \ am__expect_failure=no;; \ esac; \ $(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) # A shell command to get the names of the tests scripts with any registered # extension removed (i.e., equivalently, the names of the test logs, with # the '.log' extension removed). The result is saved in the shell variable # '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, # we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", # since that might cause problem with VPATH rewrites for suffix-less tests. # See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. am__set_TESTS_bases = \ bases='$(TEST_LOGS)'; \ bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ bases=`echo $$bases` RECHECK_LOGS = $(TEST_LOGS) AM_RECURSIVE_TARGETS = check recheck TEST_SUITE_LOG = test-suite.log TEST_EXTENSIONS = @EXEEXT@ .test am__test_logs1 = $(TESTS:=.log) am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) TEST_LOGS = $(am__test_logs2:.test.log=.log) TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \ $(TEST_LOG_FLAGS) am__set_b = \ case '$@' in \ */*) \ case '$*' in \ */*) b='$*';; \ *) b=`echo '$@' | sed 's/\.log$$//'`; \ esac;; \ *) \ b='$*';; \ esac DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ CODE_COVERAGE_CPPFLAGS = @CODE_COVERAGE_CPPFLAGS@ CODE_COVERAGE_CXXFLAGS = @CODE_COVERAGE_CXXFLAGS@ CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ CODE_COVERAGE_LIBS = @CODE_COVERAGE_LIBS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_VALGRIND_drd = @ENABLE_VALGRIND_drd@ ENABLE_VALGRIND_helgrind = @ENABLE_VALGRIND_helgrind@ ENABLE_VALGRIND_memcheck = @ENABLE_VALGRIND_memcheck@ ENABLE_VALGRIND_sgcheck = @ENABLE_VALGRIND_sgcheck@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GCOV = @GCOV@ GENHTML = @GENHTML@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLADE_CATALOG_DIR = @GLADE_CATALOG_DIR@ GLADE_CFLAGS = @GLADE_CFLAGS@ GLADE_LIBS = @GLADE_LIBS@ GLADE_PIXMAP_DIR = @GLADE_PIXMAP_DIR@ GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ GSTREAMER_CFLAGS = @GSTREAMER_CFLAGS@ GSTREAMER_LIBS = @GSTREAMER_LIBS@ GTKDOC_CHECK = @GTKDOC_CHECK@ GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ GTKDOC_REBASE = @GTKDOC_REBASE@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ HTML_DIR = @HTML_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ LCOV = @LCOV@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PARLATYPE_API_VERSION = @PARLATYPE_API_VERSION@ PARLATYPE_SO_VERSION = @PARLATYPE_SO_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VALGRIND = @VALGRIND@ VALGRIND_ENABLED = @VALGRIND_ENABLED@ VERSION = @VERSION@ WARNINGCFLAGS = @WARNINGCFLAGS@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gsettingsschemadir = @gsettingsschemadir@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ installed_test_metadir = @installed_test_metadir@ installed_testdir = @installed_testdir@ intltool__v_merge_options_ = @intltool__v_merge_options_@ intltool__v_merge_options_0 = @intltool__v_merge_options_0@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ valgrind_enabled_tools = @valgrind_enabled_tools@ valgrind_tools = @valgrind_tools@ # We require automake 1.6 at least. AUTOMAKE_OPTIONS = 1.6 # This is a blank Makefile.am for using gtk-doc. # Copy this to your project's API docs directory and modify the variables to # suit your project. See the GTK+ Makefiles in gtk+/docs/reference for examples # of using the various options. # The name of the module, e.g. 'glib'. DOC_MODULE = parlatype # Uncomment for versioned docs and specify the version of the module, e.g. '2'. #DOC_MODULE_VERSION=2 # The top-level XML file (SGML in the past). You can change this if you want to. DOC_MAIN_SGML_FILE = $(DOC_MODULE)-docs.xml # Directories containing the source code. # gtk-doc will search all .c and .h files beneath these paths # for inline comments documenting functions and macros. # e.g. DOC_SOURCE_DIR=$(top_srcdir)/gtk $(top_srcdir)/gdk DOC_SOURCE_DIR = $(top_srcdir)/src # Extra options to pass to gtkdoc-scangobj. Not normally needed. SCANGOBJ_OPTIONS = # Extra options to supply to gtkdoc-scan. # e.g. SCAN_OPTIONS=--deprecated-guards="GTK_DISABLE_DEPRECATED" SCAN_OPTIONS = --source-dir=$(top_srcdir)/src --rebuild-types # Extra options to supply to gtkdoc-mkdb. # e.g. MKDB_OPTIONS=--xml-mode --output-format=xml MKDB_OPTIONS = --xml-mode --output-format=xml # Extra options to supply to gtkdoc-mktmpl # e.g. MKTMPL_OPTIONS=--only-section-tmpl MKTMPL_OPTIONS = # Extra options to supply to gtkdoc-mkhtml MKHTML_OPTIONS = # Extra options to supply to gtkdoc-fixref. Not normally needed. # e.g. FIXXREF_OPTIONS=--extra-dir=../gdk-pixbuf/html --extra-dir=../gdk/html FIXXREF_OPTIONS = # Used for dependencies. The docs will be rebuilt if any of these change. # e.g. HFILE_GLOB=$(top_srcdir)/gtk/*.h # e.g. CFILE_GLOB=$(top_srcdir)/gtk/*.c HFILE_GLOB = $(top_srcdir)/src/*.h CFILE_GLOB = $(top_srcdir)/src/*.c # Extra header to include when scanning, which are not under DOC_SOURCE_DIR # e.g. EXTRA_HFILES=$(top_srcdir}/contrib/extra.h EXTRA_HFILES = # Header files or dirs to ignore when scanning. Use base file/dir names # e.g. IGNORE_HFILES=gtkdebug.h gtkintl.h private_code IGNORE_HFILES = \ pt-waveviewer-cursor.h \ pt-waveviewer-focus.h \ pt-waveviewer-selection.h \ pt-waveviewer-ruler.h \ pt-waveviewer-waveform.h # Images to copy into HTML directory. # e.g. HTML_IMAGES=$(top_srcdir)/gtk/stock-icons/stock_about_24.png HTML_IMAGES = \ $(srcdir)/images/pt-progress-dialog.png \ $(srcdir)/images/pt-waveviewer.png # Extra SGML files that are included by $(DOC_MAIN_SGML_FILE). # e.g. content_files=running.sgml building.sgml changes-2.0.sgml content_files = \ version.xml.in \ gallery.xml \ introduction.xml \ using_library.xml \ python_example.xml \ parlatype-example.py # SGML files where gtk-doc abbrevations (#GtkWidget) are expanded # These files must be listed here *and* in content_files # e.g. expand_content_files=running.sgml expand_content_files = # CFLAGS and LDFLAGS for compiling gtkdoc-scangobj with your library. # Only needed if you are using gtkdoc-scangobj to dynamically query widget # signals and properties. # e.g. GTKDOC_CFLAGS=-I$(top_srcdir) -I$(top_builddir) $(GTK_DEBUG_FLAGS) # e.g. GTKDOC_LIBS=$(top_builddir)/gtk/$(gtktargetlib) GTKDOC_CFLAGS = \ -I$(top_srcdir)/src \ -I$(top_builddir) \ $(PACKAGE_CFLAGS) GTKDOC_LIBS = \ $(top_builddir)/src/libparlatype.la \ $(PACKAGE_LIBS) @GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_CC = $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) @GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_CC = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) @GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_LD = $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) @GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_LD = $(LIBTOOL) --tag=CC --mode=link $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) @GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_RUN = @GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_RUN = $(LIBTOOL) --mode=execute # We set GPATH here; this gives us semantics for GNU make # which are more like other make's VPATH, when it comes to # whether a source that is a target of one rule is then # searched for in VPATH/GPATH. # GPATH = $(srcdir) TARGET_DIR = $(HTML_DIR)/$(DOC_MODULE) SETUP_FILES = \ $(content_files) \ $(DOC_MAIN_SGML_FILE) \ $(DOC_MODULE)-sections.txt \ $(DOC_MODULE)-overrides.txt # This includes the standard gtk-doc make rules, copied by gtkdocize. # Other files to distribute # e.g. EXTRA_DIST += version.xml.in EXTRA_DIST = $(HTML_IMAGES) $(SETUP_FILES) version.xml.in gallery.xml \ introduction.xml using_library.xml python_example.xml \ parlatype-example.py DOC_STAMPS = setup-build.stamp scan-build.stamp sgml-build.stamp \ html-build.stamp pdf-build.stamp \ sgml.stamp html.stamp pdf.stamp SCANOBJ_FILES = \ $(DOC_MODULE).args \ $(DOC_MODULE).hierarchy \ $(DOC_MODULE).interfaces \ $(DOC_MODULE).prerequisites \ $(DOC_MODULE).signals REPORT_FILES = \ $(DOC_MODULE)-undocumented.txt \ $(DOC_MODULE)-undeclared.txt \ $(DOC_MODULE)-unused.txt CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS) gtkdoc-check.test @GTK_DOC_BUILD_HTML_FALSE@HTML_BUILD_STAMP = @GTK_DOC_BUILD_HTML_TRUE@HTML_BUILD_STAMP = html-build.stamp @GTK_DOC_BUILD_PDF_FALSE@PDF_BUILD_STAMP = @GTK_DOC_BUILD_PDF_TRUE@PDF_BUILD_STAMP = pdf-build.stamp #### setup #### GTK_DOC_V_SETUP = $(GTK_DOC_V_SETUP_$(V)) GTK_DOC_V_SETUP_ = $(GTK_DOC_V_SETUP_$(AM_DEFAULT_VERBOSITY)) GTK_DOC_V_SETUP_0 = @echo " DOC Preparing build"; #### scan #### GTK_DOC_V_SCAN = $(GTK_DOC_V_SCAN_$(V)) GTK_DOC_V_SCAN_ = $(GTK_DOC_V_SCAN_$(AM_DEFAULT_VERBOSITY)) GTK_DOC_V_SCAN_0 = @echo " DOC Scanning header files"; GTK_DOC_V_INTROSPECT = $(GTK_DOC_V_INTROSPECT_$(V)) GTK_DOC_V_INTROSPECT_ = $(GTK_DOC_V_INTROSPECT_$(AM_DEFAULT_VERBOSITY)) GTK_DOC_V_INTROSPECT_0 = @echo " DOC Introspecting gobjects"; #### xml #### GTK_DOC_V_XML = $(GTK_DOC_V_XML_$(V)) GTK_DOC_V_XML_ = $(GTK_DOC_V_XML_$(AM_DEFAULT_VERBOSITY)) GTK_DOC_V_XML_0 = @echo " DOC Building XML"; #### html #### GTK_DOC_V_HTML = $(GTK_DOC_V_HTML_$(V)) GTK_DOC_V_HTML_ = $(GTK_DOC_V_HTML_$(AM_DEFAULT_VERBOSITY)) GTK_DOC_V_HTML_0 = @echo " DOC Building HTML"; GTK_DOC_V_XREF = $(GTK_DOC_V_XREF_$(V)) GTK_DOC_V_XREF_ = $(GTK_DOC_V_XREF_$(AM_DEFAULT_VERBOSITY)) GTK_DOC_V_XREF_0 = @echo " DOC Fixing cross-references"; #### pdf #### GTK_DOC_V_PDF = $(GTK_DOC_V_PDF_$(V)) GTK_DOC_V_PDF_ = $(GTK_DOC_V_PDF_$(AM_DEFAULT_VERBOSITY)) GTK_DOC_V_PDF_0 = @echo " DOC Building PDF"; # Files not to distribute # for --rebuild-types in $(SCAN_OPTIONS), e.g. $(DOC_MODULE).types # for --rebuild-sections in $(SCAN_OPTIONS) e.g. $(DOC_MODULE)-sections.txt DISTCLEANFILES = $(DOC_MODULE).types # Comment this out if you want 'make check' to test you doc status # and run some sanity checks @ENABLE_GTK_DOC_TRUE@TESTS_ENVIRONMENT = \ @ENABLE_GTK_DOC_TRUE@ DOC_MODULE=$(DOC_MODULE) DOC_MAIN_SGML_FILE=$(DOC_MAIN_SGML_FILE) \ @ENABLE_GTK_DOC_TRUE@ SRCDIR=$(abs_srcdir) BUILDDIR=$(abs_builddir) @ENABLE_GTK_DOC_TRUE@TESTS = $(GTKDOC_CHECK) all: all-am .SUFFIXES: .SUFFIXES: .log .test .test$(EXEEXT) .trs $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/gtk-doc.make $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/reference/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign docs/reference/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_srcdir)/gtk-doc.make: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): version.xml: $(top_builddir)/config.status $(srcdir)/version.xml.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs check-valgrind-local: check-valgrind-memcheck-local: check-valgrind-helgrind-local: check-valgrind-drd-local: check-valgrind-sgcheck-local: tags TAGS: ctags CTAGS: cscope cscopelist: # Recover from deleted '.trs' file; this should ensure that # "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create # both 'foo.log' and 'foo.trs'. Break the recipe in two subshells # to avoid problems with "make -n". .log.trs: rm -f $< $@ $(MAKE) $(AM_MAKEFLAGS) $< # Leading 'am--fnord' is there to ensure the list of targets does not # expand to empty, as could happen e.g. with make check TESTS=''. am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) am--force-recheck: @: $(TEST_SUITE_LOG): $(TEST_LOGS) @$(am__set_TESTS_bases); \ am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ redo_bases=`for i in $$bases; do \ am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ done`; \ if test -n "$$redo_bases"; then \ redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ if $(am__make_dryrun); then :; else \ rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ fi; \ fi; \ if test -n "$$am__remaking_logs"; then \ echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ "recursion detected" >&2; \ else \ am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ fi; \ if $(am__make_dryrun); then :; else \ st=0; \ errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ for i in $$redo_bases; do \ test -f $$i.trs && test -r $$i.trs \ || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ test -f $$i.log && test -r $$i.log \ || { echo "$$errmsg $$i.log" >&2; st=1; }; \ done; \ test $$st -eq 0 || exit 1; \ fi @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ ws='[ ]'; \ results=`for b in $$bases; do echo $$b.trs; done`; \ test -n "$$results" || results=/dev/null; \ all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ if test `expr $$fail + $$xpass + $$error` -eq 0; then \ success=true; \ else \ success=false; \ fi; \ br='==================='; br=$$br$$br$$br$$br; \ result_count () \ { \ if test x"$$1" = x"--maybe-color"; then \ maybe_colorize=yes; \ elif test x"$$1" = x"--no-color"; then \ maybe_colorize=no; \ else \ echo "$@: invalid 'result_count' usage" >&2; exit 4; \ fi; \ shift; \ desc=$$1 count=$$2; \ if test $$maybe_colorize = yes && test $$count -gt 0; then \ color_start=$$3 color_end=$$std; \ else \ color_start= color_end=; \ fi; \ echo "$${color_start}# $$desc $$count$${color_end}"; \ }; \ create_testsuite_report () \ { \ result_count $$1 "TOTAL:" $$all "$$brg"; \ result_count $$1 "PASS: " $$pass "$$grn"; \ result_count $$1 "SKIP: " $$skip "$$blu"; \ result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ result_count $$1 "FAIL: " $$fail "$$red"; \ result_count $$1 "XPASS:" $$xpass "$$red"; \ result_count $$1 "ERROR:" $$error "$$mgn"; \ }; \ { \ echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ $(am__rst_title); \ create_testsuite_report --no-color; \ echo; \ echo ".. contents:: :depth: 2"; \ echo; \ for b in $$bases; do echo $$b; done \ | $(am__create_global_log); \ } >$(TEST_SUITE_LOG).tmp || exit 1; \ mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ if $$success; then \ col="$$grn"; \ else \ col="$$red"; \ test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ fi; \ echo "$${col}$$br$${std}"; \ echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ echo "$${col}$$br$${std}"; \ create_testsuite_report --maybe-color; \ echo "$$col$$br$$std"; \ if $$success; then :; else \ echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ if test -n "$(PACKAGE_BUGREPORT)"; then \ echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ fi; \ echo "$$col$$br$$std"; \ fi; \ $$success || exit 1 check-TESTS: @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) @set +e; $(am__set_TESTS_bases); \ log_list=`for i in $$bases; do echo $$i.log; done`; \ trs_list=`for i in $$bases; do echo $$i.trs; done`; \ log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ exit $$?; recheck: all @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) @set +e; $(am__set_TESTS_bases); \ bases=`for i in $$bases; do echo $$i; done \ | $(am__list_recheck_tests)` || exit 1; \ log_list=`for i in $$bases; do echo $$i.log; done`; \ log_list=`echo $$log_list`; \ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ am__force_recheck=am--force-recheck \ TEST_LOGS="$$log_list"; \ exit $$? .test.log: @p='$<'; \ $(am__set_b); \ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) @am__EXEEXT_TRUE@.test$(EXEEXT).log: @am__EXEEXT_TRUE@ @p='$<'; \ @am__EXEEXT_TRUE@ $(am__set_b); \ @am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ @am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ @am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ @am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: check-am @ENABLE_GTK_DOC_FALSE@all-local: all-am: Makefile all-local installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." check-valgrind: check-valgrind-am check-valgrind-am: check-valgrind-local check-valgrind-drd: check-valgrind-drd-am check-valgrind-drd-am: check-valgrind-drd-local check-valgrind-helgrind: check-valgrind-helgrind-am check-valgrind-helgrind-am: check-valgrind-helgrind-local check-valgrind-memcheck: check-valgrind-memcheck-am check-valgrind-memcheck-am: check-valgrind-memcheck-local check-valgrind-sgcheck: check-valgrind-sgcheck-am check-valgrind-sgcheck-am: check-valgrind-sgcheck-local clean: clean-am clean-am: clean-generic clean-libtool clean-local mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic distclean-local dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-data-local install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic \ maintainer-clean-local mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-local .MAKE: check-am install-am install-strip .PHONY: all all-am all-local check check-TESTS check-am \ check-valgrind-am check-valgrind-drd-am \ check-valgrind-drd-local check-valgrind-helgrind-am \ check-valgrind-helgrind-local check-valgrind-local \ check-valgrind-memcheck-am check-valgrind-memcheck-local \ check-valgrind-sgcheck-am check-valgrind-sgcheck-local clean \ clean-generic clean-libtool clean-local cscopelist-am ctags-am \ dist-hook distclean distclean-generic distclean-libtool \ distclean-local distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am \ install-data-local install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic maintainer-clean-local mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ recheck tags-am uninstall uninstall-am uninstall-local gtkdoc-check.test: Makefile $(AM_V_GEN)echo "#!/bin/sh -e" > $@; \ echo "$(GTKDOC_CHECK_PATH) || exit 1" >> $@; \ chmod +x $@ all-gtk-doc: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP) .PHONY: all-gtk-doc @ENABLE_GTK_DOC_TRUE@all-local: all-gtk-doc docs: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP) $(REPORT_FILES): sgml-build.stamp setup-build.stamp: -$(GTK_DOC_V_SETUP)if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \ files=`echo $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types`; \ if test "x$$files" != "x" ; then \ for file in $$files ; do \ destdir=`dirname $(abs_builddir)/$$file`; \ test -d "$$destdir" || mkdir -p "$$destdir"; \ test -f $(abs_srcdir)/$$file && \ cp -pf $(abs_srcdir)/$$file $(abs_builddir)/$$file || true; \ done; \ fi; \ fi $(AM_V_at)touch setup-build.stamp scan-build.stamp: setup-build.stamp $(HFILE_GLOB) $(CFILE_GLOB) $(GTK_DOC_V_SCAN)_source_dir='' ; \ for i in $(DOC_SOURCE_DIR) ; do \ _source_dir="$${_source_dir} --source-dir=$$i" ; \ done ; \ gtkdoc-scan --module=$(DOC_MODULE) --ignore-headers="$(IGNORE_HFILES)" $${_source_dir} $(SCAN_OPTIONS) $(EXTRA_HFILES) $(GTK_DOC_V_INTROSPECT)if grep -l '^..*$$' $(DOC_MODULE).types > /dev/null 2>&1 ; then \ scanobj_options=""; \ gtkdoc-scangobj 2>&1 --help | grep >/dev/null "\-\-verbose"; \ if test "$(?)" = "0"; then \ if test "x$(V)" = "x1"; then \ scanobj_options="--verbose"; \ fi; \ fi; \ CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" \ gtkdoc-scangobj $(SCANGOBJ_OPTIONS) $$scanobj_options --module=$(DOC_MODULE); \ else \ for i in $(SCANOBJ_FILES) ; do \ test -f $$i || touch $$i ; \ done \ fi $(AM_V_at)touch scan-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp @true sgml-build.stamp: setup-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt $(expand_content_files) $(GTK_DOC_V_XML)_source_dir='' ; \ for i in $(DOC_SOURCE_DIR) ; do \ _source_dir="$${_source_dir} --source-dir=$$i" ; \ done ; \ gtkdoc-mkdb --module=$(DOC_MODULE) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $${_source_dir} $(MKDB_OPTIONS) $(AM_V_at)touch sgml-build.stamp sgml.stamp: sgml-build.stamp @true html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) $(GTK_DOC_V_HTML)rm -rf html && mkdir html && \ mkhtml_options=""; \ gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-verbose"; \ if test "$(?)" = "0"; then \ if test "x$(V)" = "x1"; then \ mkhtml_options="$$mkhtml_options --verbose"; \ fi; \ fi; \ gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-path"; \ if test "$(?)" = "0"; then \ mkhtml_options="$$mkhtml_options --path=\"$(abs_srcdir)\""; \ fi; \ cd html && gtkdoc-mkhtml $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE) -@test "x$(HTML_IMAGES)" = "x" || \ for file in $(HTML_IMAGES) ; do \ if test -f $(abs_srcdir)/$$file ; then \ cp $(abs_srcdir)/$$file $(abs_builddir)/html; \ fi; \ if test -f $(abs_builddir)/$$file ; then \ cp $(abs_builddir)/$$file $(abs_builddir)/html; \ fi; \ done; $(GTK_DOC_V_XREF)gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS) $(AM_V_at)touch html-build.stamp pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) $(GTK_DOC_V_PDF)rm -f $(DOC_MODULE).pdf && \ mkpdf_options=""; \ gtkdoc-mkpdf 2>&1 --help | grep >/dev/null "\-\-verbose"; \ if test "$(?)" = "0"; then \ if test "x$(V)" = "x1"; then \ mkpdf_options="$$mkpdf_options --verbose"; \ fi; \ fi; \ if test "x$(HTML_IMAGES)" != "x"; then \ for img in $(HTML_IMAGES); do \ part=`dirname $$img`; \ echo $$mkpdf_options | grep >/dev/null "\-\-imgdir=$$part "; \ if test $$? != 0; then \ mkpdf_options="$$mkpdf_options --imgdir=$$part"; \ fi; \ done; \ fi; \ gtkdoc-mkpdf --path="$(abs_srcdir)" $$mkpdf_options $(DOC_MODULE) $(DOC_MAIN_SGML_FILE) $(MKPDF_OPTIONS) $(AM_V_at)touch pdf-build.stamp ############## clean-local: @rm -f *~ *.bak @rm -rf .libs @if echo $(SCAN_OPTIONS) | grep -q "\-\-rebuild-types" ; then \ rm -f $(DOC_MODULE).types; \ fi distclean-local: @rm -rf xml html $(REPORT_FILES) $(DOC_MODULE).pdf \ $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt @if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \ rm -f $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types; \ fi maintainer-clean-local: @rm -rf xml html install-data-local: @installfiles=`echo $(builddir)/html/*`; \ if test "$$installfiles" = '$(builddir)/html/*'; \ then echo 1>&2 'Nothing to install' ; \ else \ if test -n "$(DOC_MODULE_VERSION)"; then \ installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \ else \ installdir="$(DESTDIR)$(TARGET_DIR)"; \ fi; \ $(mkinstalldirs) $${installdir} ; \ for i in $$installfiles; do \ echo ' $(INSTALL_DATA) '$$i ; \ $(INSTALL_DATA) $$i $${installdir}; \ done; \ if test -n "$(DOC_MODULE_VERSION)"; then \ mv -f $${installdir}/$(DOC_MODULE).devhelp2 \ $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp2; \ fi; \ $(GTKDOC_REBASE) --relative --dest-dir=$(DESTDIR) --html-dir=$${installdir}; \ fi uninstall-local: @if test -n "$(DOC_MODULE_VERSION)"; then \ installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \ else \ installdir="$(DESTDIR)$(TARGET_DIR)"; \ fi; \ rm -rf $${installdir} # # Require gtk-doc when making dist # @HAVE_GTK_DOC_TRUE@dist-check-gtkdoc: docs @HAVE_GTK_DOC_FALSE@dist-check-gtkdoc: @HAVE_GTK_DOC_FALSE@ @echo "*** gtk-doc is needed to run 'make dist'. ***" @HAVE_GTK_DOC_FALSE@ @echo "*** gtk-doc was not found when 'configure' ran. ***" @HAVE_GTK_DOC_FALSE@ @echo "*** please install gtk-doc and rerun 'configure'. ***" @HAVE_GTK_DOC_FALSE@ @false dist-hook: dist-check-gtkdoc all-gtk-doc dist-hook-local @mkdir $(distdir)/html @cp ./html/* $(distdir)/html @-cp ./$(DOC_MODULE).pdf $(distdir)/ @-cp ./$(DOC_MODULE).types $(distdir)/ @-cp ./$(DOC_MODULE)-sections.txt $(distdir)/ @cd $(distdir) && rm -f $(DISTCLEANFILES) @$(GTKDOC_REBASE) --online --relative --html-dir=$(distdir)/html .PHONY : dist-hook-local docs # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: parlatype-1.5.4/libparlatype/docs/reference/images/0000755000175000017500000000000013204324046017344 500000000000000parlatype-1.5.4/libparlatype/docs/reference/images/pt-waveviewer.png0000644000175000017500000001644213176574164022626 00000000000000PNG  IHDRu2bKGD pHYs  tIME1✑IDATx{\Te ̀8,0/Ix VЬZܬV7tmi_KnmeRy)K-j% x&΀03ܙ933g<9GRYYʇI@DD$>_?999L """7KLL4 ”!޽L#_|5Z}MqWX6'Mb"xlMD^'$-  $- E0y<S aB0͘٠Am~/4A3f0$>>蕞1X֮V10[&b&"r!fF1001110011001BJJ*LNJB;c'|-Zex"9q_w08:1U*5@'=ҡp~>XMtQ˵Z:^P1|8Nʕ_qy}w uUC]Sc8^yE gO&<wٲu`CV\r\A0=#ΟGq%@p`/\r+WASJ=z9Uj5pq@*BVAu?pF 3Y4 `j|</wݰi3TgfaC tS+W\zF6-y(8qÇŴvڷ2g;I8^P QwE  S+JfީV=z85_::C+/5! iRRswA`(rli D ^(=#/\ mPbXȣvhH(F2wU ӓfb!t{5f9Eg0?u޲u!eg#:*]ӅE A#ݝR%%¡]h6 h> 6tKZ벳۴0ީc}u[sWʤx|l@ɥ(&HQQ,\lm8]XQ&,0]ӥR999HIIcdN\v:z~ql5{;ֽ1#PQQJQXj/Znv0십nC޽wG<]yyV}áT*q5 sf?֮1=uC<p=v1܃Ncؐ޽ 4+P{D}#& xke-o. t$ƍys=SزufH峄WGo G/vsAIl˜=~8v3w͖jzFakWXcƱ5 'tE[֋.K1LOp2Uofil\W>s"8A,foo- 㧝M KČ9띪t?pjיҺ2?u.2LR4. zf+$nYr}r\$mZ[?qk㫯Mbqetk݋.hbw`3O`dL TjXkO]Sbczgd:7|og+[ 8օf wowK{NَPFO6mVe<|uIdfV0%:]{߆Y(8q1\kI+̤LLK8br^z,! }c`W_|PX-L5B¹ :aaA ;uho8!bN_{B1|8JJ˸??)u튫^~2dGv\-+C]HdDo `'RJSl= /މUXz͇m?m*+ǣwx8u DzF&KJPWWۧzcU힩 aK_^pFsѱ\>i'-%= ޴ݟ *x[ xZV Fyyv}KYǞME>p"nܸjmbY?G=avA{ݽ>RX0թxM0 _{j07{ZB-k|;q BdDaُ֜YG??_tME}}} =!bH'Idٖ6,m A`` Tt豄k,mU%5;r Gxh6Zവx7> spT-$5l\544,kkZ-Dѣ7QԨDLe4<(ma'-ma*Q\RBnRᯫ N!; &Nl2@kM])~ 1$ERX=2)^bu?={0V1z<8LҹȦf$ylw#gO.k잺}wq._l -˳ܲ_=kbcQYUvuzGfpH0{>Xh*`e޺ PW_'NUo1=:UxxQ\l,-[ep(CM^fvñ?k`Wߊ"#"vy:h}Lȅhll@A\t:\~rS&MD^RAHxXhhs]kҹUЈ벳0xbʀqL&ţ? xkr9}Ts+{[%+g!-bU*w㶱˳0-!dBr\?M&t , a+ bW.Ac-3if7NfN?O$'5kٺb-͚{ˑLnM:T$E]]=$a[7ZɥK.UH|f}}}׷}͓))ɤ dR: R@6bKm@. mA.IANWHw#A#k]n:΂v˲cg.IS> . ˲L'mج¸'(MXhLIdz[@l#DFD*,h]z;޽7wԣz4Uҳ',v i/AYI JԄcǚ%٣ScdO047 #4YGz:lςf@enFogmh{ӽ=&e)/,TFh3w`_&G'-Z 6\lu]1\D$ ""b&""b&"""`"""`"""b&""b&"""`"""`"""b&""b&""b&"""`"""`"""b&""b&"""`"""`"""b&""b&""b&"""`""[UUU&6y3fg|p78s|͏8k!s?Bx(/>q027&(C`d]~'C`W q<ք9оqQ=*^|p}>/%x̚93#ѣGO2>H&$FTMT S0v?g]`;[C~IxuqlGɏH|"^̞|pu>h+Q~Q gA|Lq=ZɯM@("E+LNaP[I͉ob_8+|v\r>h`O^E]G@? s\2ſu(b ~w"/^o?f Ǡ)ϩET7@i%"6G7x}Hu|q\r>4\Y cƂW ]܇w^Cϛxw!ew?UZx>_ܕ: e *A#/c2?:h}Bq3#?@H{ގ CdL{1_vn X9;?'f>4A ŐĐ~A6_C6qlZ0fG顪uu=tСz54Gn`7_9»WUt @rb_SذMf":-j>4\aB.M454@/S@HlwZ:,H^gO&w-Ɩ[_Q|܌ xk9܈- g>a,}Dnu(cm X*\Q/0~UlSyX&g( `KL½-:M jQFPV]|#_͘NM\{*Z>s\r>H79~˱2gsRz~ rQ0¶M!6W4T "7<'hݜqo?oJü 7fJLy<~n'lD <7^x"!!M<36?Z.5ee4?4'A"ȴ`{1k!H!1yZfLDDLDDD.µ.je^/ \ "sP(ܨ=^Ǎ: /0ue<""`V=h4aɼg/9#"`$BCzz͹2C:\~} {I$_߾w !ːAK&""b&"""L!""Rd ""<{sկs/IENDB`parlatype-1.5.4/libparlatype/docs/reference/images/pt-progress-dialog.png0000644000175000017500000001163413171727132023527 00000000000000PNG  IHDR #sBIT|dtEXtSoftwaregnome-screenshot>.IDATxy|H2 p_$Vh֪At[v[Z]-ݺ*ҭJqW%`\!L3CL2f&/~17d !B!.BtOYVv/+R%AL )UUz6~`ҥӀԠRCO8E^Wzx}'B rrqVpnUٰvԜ tƸB|L&O4)o +V̚3gC.+Bxow18uUO0u5 !N<@Ӂ/ɡGB`84U] !頋}ThF>릅,}}a 1pBxR Nʈ*HP)}Q   # AB$Bh 2 T!4@J_!4@FT!4@*H+Ȉ*HP  AB$BhU T!4@*HP  Ah<-soD ԞhO}g-yU}&] Z;|)sҷ߯葐gψ|16>bGxi>^_D6qF#AtFٶ Lf\QH^5,1 B޶r\?l5/' I =?h1?331[ScK!Jo>IcX拇P{S80e˿\޿]so]!n]Ġ䶥p٬סzx(ז33U<'9yMoP*{O}A~ʽma%qKG`wef~oȜWe/̧0͈)6Ľ/)}3& /o<3]hNrō1[>20;?},yCG2ɤwT\wWNC|Yd5s j>6P+I^OCrc3u?U)K"1uW/݁wp~{R-d2&܏Ҙ9 Էy I͇/fme k j6}70A\5R3*;cb]).#jޒM7jGWQI!7Ij/ð8p-Oks䄃R{sI|Rk s/RI0 _<ηhrK%oOgm67újrl>̫ay33RT{+6 ـ]ޢ>%v|5Su|ݑwOq,q jk>c>>NYRQVCMM=δKzQQ^'멭:ݥ4W ܰ}k1Q{UϫJ?ӥuXf5Ko{f%%(o&%OgLI4fk~^^Uv# HOo{VrռǬq1 wkxHg/Sp7)9SMkPS F9$ep?ͭ?'/__􏌌ڃ;R,y]gaR"kObݺ2HyAËF{d$dc歿oTdU~&B T!4@*HP  AB$BhU T!4@* 'ʇiɕ^1{r6WODdbȐ!L2+ L>KnJ/_Șx9xN,;U͔R\\]ȀqB>7xU+QLyyyw#b>F! _x:6|P|c'U,餘v;./cup'O6FjDn-]b3v K0 f沂TCgql7YLQd'*-KE8^O;ڿm muܱ*w_+fѤsia^Z7}ܰT䂈N#I'Do3M{s67 8RJ1nڛNQҁftvaQW@ܰ|2LQu6R}A模$@u|kWќNnN&ڱ64nQ0[I祣zsy)N*=||{Ff}sZ**zCa=LZNTU@GRP.ܲNQk&;B\prAD jccS:#hD jSsso"fh})}a'HO 5!荊5>j  Q=a10`R>ij$!b豈TUU] (}G*Af}Djmߥ GUkjjaCC Na\ΡUCK,٦j̙g::p\vǶm>`vn^ cuUUUMc2t{zdg{>1,/]r?899?pPsr8I)Ǫ_弡dfd[l{h\po_O@ 0aڵW͛7nEQE/4ޱiӦNhw:[utj/#M6vٲe_?~lɔb!"vmmm{=޽{w%pra0m=CUV/ 儠)=ӋZ`r_  ց<9708? HP)5֋/_[U7?9o.$BD"TPF'CPÍ^΍ ܯ@ T! j [| 685dP $^h*!{5\Az!|um4%q JXsG}tR! qC {.]t 3 uGVB!Ϟx{QTIENDB`parlatype-1.5.4/libparlatype/docs/reference/html/0000755000175000017500000000000013204324053017041 500000000000000parlatype-1.5.4/libparlatype/docs/reference/html/up-insensitive.png0000644000175000017500000000056613204324053022460 00000000000000PNG  IHDRabKGD pHYs B(xtIMEwIIDAT8?/Qϙ?[u$VHTDۈBM+! Parlatype Reference Manual: PtPlayer

PtPlayer

PtPlayer — The GStreamer backend for Parlatype.

Stability Level

Unstable, unless otherwise indicated

Functions

PtPlayer * pt_player_new ()
void pt_player_open_uri_async ()
gboolean pt_player_open_uri_finish ()
gboolean pt_player_open_uri ()
void pt_player_cancel ()
void pt_player_play ()
void pt_player_pause ()
void pt_player_set_selection ()
void pt_player_clear_selection ()
void pt_player_jump_relative ()
void pt_player_jump_to_position ()
void pt_player_jump_to_permille ()
gint pt_player_get_permille ()
void pt_player_set_speed ()
void pt_player_set_volume ()
void pt_player_mute_volume ()
void pt_player_rewind ()
void pt_player_fast_forward ()
gint64 pt_player_get_position ()
gint64 pt_player_get_duration ()
gchar * pt_player_get_uri ()
gchar * pt_player_get_filename ()
gchar * pt_player_get_time_string ()
gchar * pt_player_get_current_time_string ()
gchar * pt_player_get_duration_time_string ()
gchar * pt_player_get_timestamp ()
gboolean pt_player_string_is_timestamp ()
gboolean pt_player_goto_timestamp ()
PtWavedata * pt_player_get_data ()

Properties

gdouble speed Read / Write / Construct
gdouble volume Read / Write / Construct

Signals

void end-of-stream Run First
void error Run First
void load-progress Run First

Types and Values

struct PtPlayer
enum PtPrecisionType

Object Hierarchy

    GObject
    ╰── PtPlayer

Implemented Interfaces

PtPlayer implements GInitable.

Includes

#include <parlatype/pt-player.h>

Description

PtPlayer is the GStreamer backend for Parlatype. Construct it with pt_player_new(). Then you have to open a file, either with pt_player_open_uri_async() or pt_player_open_uri(), the blocking version.

The internal time unit in PtPlayer are milliseconds and for scale widgets there is a scale from 0 to 1000. Use it to jump to a position or to update your widget.

While playing PtPlayer emits these signals:

  • end-of-stream: End of file reached, in the GUI you might want to jump to the beginning, reset play button etc.

  • error: A fatal error occured, the player is reset. There's an error message.

PtPlayer has two properties:

  • speed: is a double from 0.5 to 1.5. 1.0 is normal playback, < 1.0 is slower, > 1.0 is faster. Changing the "speed" property doesn't change playback though. Use the method instead.

  • Volume is a double from 0 to 1. It can be set via the method or setting the "volume" property.

Functions

pt_player_new ()

PtPlayer *
pt_player_new (GError **error);

This is a failable constructor. It fails, if GStreamer doesn't init or a plugin is missing. In this case NULL is returned, error is set.

After use g_object_unref() it.

Parameters

error

return location for an error, or NULL.

[allow-none]

Returns

a new pt_player.

[transfer full]

pt_player_open_uri_async ()

void
pt_player_open_uri_async (PtPlayer *player,
                          gchar *uri,
                          GAsyncReadyCallback callback,
                          gpointer user_data);

Opens a local audio file for playback. It doesn't work with videos or streams. Only one file can be open at a time, playlists are not supported by the backend. Opening a new file will close the previous one.

When closing a file or on object destruction PtPlayer tries to write the last position into the file's metadata. On opening a file it reads the metadata and jumps to the last known position if found.

The player is set to the paused state and ready for playback. To start playback use pt_player_play() .

This is an asynchronous operation, to get the result call pt_player_open_uri_finish() in your callback. For the blocking version see pt_player_open_uri().

While loading the file there is a “load-progress” signal emitted which stops before reaching 100%. Don't use it to determine whether the operation is finished.

Parameters

player

a PtPlayer

  

uri

the URI of the file

  

callback

a GAsyncReadyCallback to call when the operation is complete.

[scope async]

user_data

user_data for callback.

[closure]

pt_player_open_uri_finish ()

gboolean
pt_player_open_uri_finish (PtPlayer *player,
                           GAsyncResult *result,
                           GError **error);

Gives the result of the async opening operation. A cancelled operation results in an error, too.

Parameters

player

a PtPlayer

  

result

the GAsyncResult passed to your GAsyncReadyCallback

  

error

a pointer to a NULL GError, or NULL.

[allow-none]

Returns

TRUE if successful, or FALSE with error set

pt_player_open_uri ()

gboolean
pt_player_open_uri (PtPlayer *player,
                    gchar *uri,
                    GError **error);

Opens a local audio file for playback. It doesn't work with videos or streams. Only one file can be open at a time, playlists are not supported by the backend. Opening a new file will close the previous one.

When closing a file or on object destruction PtPlayer tries to write the last position into the file's metadata. On opening a file it reads the metadata and jumps to the last known position if found.

The player is set to the paused state and ready for playback. To start playback use pt_player_play() .

This operation blocks until it is finished. It returns TRUE on success or FALSE and an error. For the asynchronous version see pt_player_open_uri_async().

While loading the file there is a “load-progress” signal emitted. However, it doesn't emit 100%, the operation is finished when TRUE is returned.

Parameters

player

a PtPlayer

  

uri

the URI of the file

  

error

return location for an error, or NULL.

[allow-none]

Returns

TRUE if successful, or FALSE with error set

pt_player_cancel ()

void
pt_player_cancel (PtPlayer *player);

Cancels the file opening operation, which triggers an error message.

Parameters

player

a PtPlayer

  

pt_player_play ()

void
pt_player_play (PtPlayer *player);

Starts playback at the defined speed until it reaches the end of stream (or the end of the selection)..

Parameters

player

a PtPlayer

  

pt_player_pause ()

void
pt_player_pause (PtPlayer *player);

Sets the player to the paused state, meaning it stops playback and doesn't change position. To resume playback use pt_player_play() .

Parameters

player

a PtPlayer

  

pt_player_set_selection ()

void
pt_player_set_selection (PtPlayer *player,
                         gint64 start,
                         gint64 end);

Set a selection. If the current position is outside the selection, it will be set to the selection's start position, otherwise the current position is not changed. Playing will end at the stop position and it's not possible to jump out of the selection until it is cleared with pt_player_clear_selection.

Parameters

player

a PtPlayer

  

start

selection start time in milliseconds

  

end

selection end time in milliseconds

  

pt_player_clear_selection ()

void
pt_player_clear_selection (PtPlayer *player);

Clear and reset any selection.

Parameters

player

a PtPlayer

  

pt_player_jump_relative ()

void
pt_player_jump_relative (PtPlayer *player,
                         gint milliseconds);

Skips milliseconds in stream. A positive value means jumping ahead. If the resulting position would be beyond the end of stream (or selection), it goes to the end of stream (or selection). A negative value means jumping back. If the resulting position would be negative (or before the selection), it jumps to position 0:00 (or to the start of the selection).

Parameters

player

a PtPlayer

  

milliseconds

time in milliseconds to jump

  

pt_player_jump_to_position ()

void
pt_player_jump_to_position (PtPlayer *player,
                            gint milliseconds);

Jumps to a given position in stream. The position is given in milliseconds starting from position 0:00. A position beyond the duration of stream (or outside the selection) is ignored.

Parameters

player

a PtPlayer

  

milliseconds

position in milliseconds

  

pt_player_jump_to_permille ()

void
pt_player_jump_to_permille (PtPlayer *player,
                            guint permille);

This is used for scale widgets. Start of stream is at 0, end of stream is at 1000. This will jump to the given position. If your widget uses a different scale, it's up to you to convert it to 1/1000. Values beyond 1000 are not allowed, values outside the selection are ignored.

Parameters

player

a PtPlayer

  

permille

scale position between 0 and 1000

  

pt_player_get_permille ()

gint
pt_player_get_permille (PtPlayer *player);

This is used for scale widgets. If the scale has to synchronize with the current position in stream, this gives the position on a scale between 0 and 1000.

Failure in querying the position returns -1.

Parameters

player

a PtPlayer

  

Returns

a scale position between 0 and 1000 or -1 on failure

pt_player_set_speed ()

void
pt_player_set_speed (PtPlayer *player,
                     gdouble speed);

Sets the speed of playback in the paused state as well as during playback. Normal speed is 1.0, everything above that is faster, everything below slower. A speed of 0 is not allowed, use pt_player_pause() instead. Recommended speed is starting from 0.5 as quality is rather poor below that. Parlatype doesn't change the pitch during slower or faster playback.

Note: If you want to change the speed during playback, you have to use this method. Changing the "speed" property of PtPlayer, will take effect only later.

Parameters

player

a PtPlayer

  

speed

speed

  

pt_player_set_volume ()

void
pt_player_set_volume (PtPlayer *player,
                      gdouble volume);

Sets the volume on a scale between 0 and 1. Instead of using this method you could set the "volume" property.

Parameters

player

a PtPlayer

  

volume

volume

  

pt_player_mute_volume ()

void
pt_player_mute_volume (PtPlayer *player,
                       gboolean mute);

Mute the player (with TRUE) or set it back to normal volume (with FALSE). This remembers the volume level, so you don't have to keep track of the old value.

Parameters

player

a PtPlayer

  

mute

a gboolean

  

pt_player_rewind ()

void
pt_player_rewind (PtPlayer *player,
                  gdouble speed);

Rewinds at the given speed. speed accepts positive as well as negative values and normalizes them to play backwards.

This is only available with GStreamer >= 1.6.3 (because of https://bugzilla.gnome.org/show_bug.cgi?id=757033).

If you call this with an older version of GStreamer, it will only print a warning to standard output.

Note that depending on the file/stream format this works more or less good.

Parameters

player

a PtPlayer

  

speed

the speed

  

pt_player_fast_forward ()

void
pt_player_fast_forward (PtPlayer *player,
                        gdouble speed);

Play fast forward at the given speed.

This is only available with GStreamer >= 1.6.3 (because rewind is working properly with that version).

If you call this with an older version of GStreamer, it will only print a warning to standard output.

Parameters

player

a PtPlayer

  

speed

the speed

  

pt_player_get_position ()

gint64
pt_player_get_position (PtPlayer *player);

Returns the current position in stream.

Parameters

player

a PtPlayer

  

Returns

position in milliseconds or -1 on failure

pt_player_get_duration ()

gint64
pt_player_get_duration (PtPlayer *player);

Returns the duration of stream.

Parameters

player

a PtPlayer

  

Returns

duration in milliseconds

pt_player_get_uri ()

gchar *
pt_player_get_uri (PtPlayer *player);

Returns the URI of the currently open file or NULL if it can't be determined.

Parameters

player

a PtPlayer

  

Returns

the uri.

[transfer full]

pt_player_get_filename ()

gchar *
pt_player_get_filename (PtPlayer *player);

Returns the display name of the currently open file or NULL if it can't be determined.

Parameters

player

a PtPlayer

  

Returns

the file name.

[transfer full]

pt_player_get_time_string ()

gchar *
pt_player_get_time_string (gint time,
                           gint duration,
                           PtPrecisionType precision);

Returns the given time as a string for display to the user. Format type is determined by duration , e.g. if duration is long format, it returns a string in long format, too.

Parameters

time

time in milliseconds to converse

  

duration

duration of stream in milliseconds (max time)

  

precision

a PtPrecisionType

  

Returns

the time string.

[transfer full]

pt_player_get_current_time_string ()

gchar *
pt_player_get_current_time_string (PtPlayer *player,
                                   PtPrecisionType precision);

Returns the current position of the stream as a string for display to the user.

If the current position can not be determined, NULL is returned.

Parameters

player

a PtPlayer

  

precision

a PtPrecisionType

  

Returns

the time string.

[transfer full]

pt_player_get_duration_time_string ()

gchar *
pt_player_get_duration_time_string (PtPlayer *player,
                                    PtPrecisionType precision);

Returns the duration of the stream as a string for display to the user.

If the duration can not be determined, NULL is returned.

Parameters

player

a PtPlayer

  

precision

a PtPrecisionType

  

Returns

the time string.

[transfer full]

pt_player_get_timestamp ()

gchar *
pt_player_get_timestamp (PtPlayer *player);

Returns the current timestamp as a string. The format of timestamps can not be changed.

If the current position can not be determined, NULL is returned.

Parameters

player

a PtPlayer

  

Returns

the timestamp.

[transfer full]

pt_player_string_is_timestamp ()

gboolean
pt_player_string_is_timestamp (PtPlayer *player,
                               gchar *timestamp);

Returns whether the given string is a valid timestamp.

See also pt_player_goto_timestamp() if you want to go to the timestamp's position immediately after.

Parameters

player

a PtPlayer

  

timestamp

the string to be checked

  

Returns

TRUE if the timestamp is valid, FALSE if not

pt_player_goto_timestamp ()

gboolean
pt_player_goto_timestamp (PtPlayer *player,
                          gchar *timestamp);

Goes to the position of the timestamp. Returns false, if it's not a valid timestamp.

Parameters

player

a PtPlayer

  

timestamp

the timestamp to go to

  

Returns

TRUE on success, FALSE if the timestamp is not valid

pt_player_get_data ()

PtWavedata *
pt_player_get_data (PtPlayer *player,
                    gint pps);

Returns wave data needed for visual representation as raw data. The requested resolution is given as pixel per seconds, e.g. 100 means one second is represented by 100 samples, is 100 pixels wide. The returned resolution doesn't have to be necessarily exactly the requested resolution, it might be a bit differnt, depending on the bit rate.

Parameters

player

a PtPlayer

  

pps

the requested pixel per second ratio

  

Returns

the PtWavedata.

[transfer full]

Types and Values

struct PtPlayer

struct PtPlayer;

The PtPlayer contains only private fields and should not be directly accessed.

enum PtPrecisionType

Enum values indicating desired precision of time strings.

Members

PT_PRECISION_SECOND

Rounds to full seconds, e.g. 1:23 (1 minute, 23 seconds)

  

PT_PRECISION_SECOND_10TH

Round to 1/10 seconds, e.g. 1:23.4

  

PT_PRECISION_SECOND_100TH

Round to 1/100 seconds, e.g. 1:23.45

  

Property Details

The “speed” property

  “speed”                    gdouble

The speed for playback.

Flags: Read / Write / Construct

Allowed values: [0.1,2]

Default value: 1

The “volume” property

  “volume”                   gdouble

The volume for playback.

Flags: Read / Write / Construct

Allowed values: [0,1]

Default value: 1

Signal Details

The “end-of-stream” signal

void
user_function (PtPlayer *player,
               gpointer  user_data)

The “end-of-stream” signal is emitted when the stream is at its end or when the end of selection is reached.

Parameters

player

the player emitting the signal

  

user_data

user data set when the signal handler was connected.

  

Flags: Run First

The “error” signal

void
user_function (PtPlayer *player,
               GError   *error,
               gpointer  user_data)

The “error” signal is emitted on errors opening the file or during playback. It's a severe error and the player is always reset.

Parameters

player

the player emitting the signal

  

error

a GError

  

user_data

user data set when the signal handler was connected.

  

Flags: Run First

The “load-progress” signal

void
user_function (PtPlayer *player,
               gdouble   progress,
               gpointer  user_data)

Indicates progress on a scale from 0.0 to 1.0, however it does not emit the value 0.0 nor 1.0. Wait for a TRUE player-state-changed signal or an error signal to dismiss a gui element showing progress.

Parameters

player

the player emitting the signal

  

progress

the new progress state, ranging from 0.0 to 1.0

  

user_data

user data set when the signal handler was connected.

  

Flags: Run First

Generated by GTK-Doc V1.21
parlatype-1.5.4/libparlatype/docs/reference/html/gallery.html0000644000175000017500000000410713204324053021310 00000000000000 Parlatype Reference Manual: Widget gallery

Widget gallery

Parlatype provides two GtkWidgets, PtProgressDialog and PtWaveviewer.

Generated by GTK-Doc V1.21
parlatype-1.5.4/libparlatype/docs/reference/html/object-tree.html0000644000175000017500000000745313204324053022063 00000000000000 Parlatype Reference Manual: Object Hierarchy

Object Hierarchy

    GObject
    ├── PtPlayer
    ├── GInitiallyUnowned
    │   ╰── GtkWidget
    │       ╰── GtkContainer
    │           ╰── GtkBin
    │               ├── GtkWindow
    │               │   ╰── GtkDialog
    │               │       ╰── GtkMessageDialog
    │               │           ╰── PtProgressDialog
    │               ╰── GtkScrolledWindow
    │                   ╰── PtWaveviewer
    ╰── PtWaveloader
    GBoxed
    ╰── PtWavedata
Generated by GTK-Doc V1.21
parlatype-1.5.4/libparlatype/docs/reference/html/pt01.html0000644000175000017500000000362713204324053020443 00000000000000 Parlatype Reference Manual: Part I. Overview

Part I. Overview

Table of Contents

Introduction
Using the library
A python example
Generated by GTK-Doc V1.21
parlatype-1.5.4/libparlatype/docs/reference/html/right-insensitive.png0000644000175000017500000000056513204324053023150 00000000000000PNG  IHDRabKGD pHYs B(xtIME ^IDAT8͒J` /S_$AqrW(>m"]\(49.Nd39{eM#MSIιEiHz|3{̲l3,KkV'@EEQlwyiq]Kh4:mĦ,;ts\aR5/7'Wps׭I,K1=0j0Wg> PU𻤝0 ]?qCҫιg~kA_IENDB`parlatype-1.5.4/libparlatype/docs/reference/html/PtWavedata.html0000644000175000017500000003502013204324053021707 00000000000000 Parlatype Reference Manual: PtWavedata

PtWavedata

PtWavedata — A boxed type with wave data.

Stability Level

Unstable, unless otherwise indicated

Functions

PtWavedata * pt_wavedata_new ()
PtWavedata * pt_wavedata_copy ()
void pt_wavedata_free ()

Types and Values

struct PtWavedata

Object Hierarchy

    GBoxed
    ╰── PtWavedata

Includes

#include <parlatype/pt-wavedata.h>

Description

Contains all information needed to show a wave form. It's produced by PtPlayer or PtWaveloader. Pass it to PtWaveviewer to visualize the wave. PtWaveviewer copies the data, you can free it immediately with pt_wavedata_free().

There is no need to access the struct members.

Assuming you have set up a PtPlayer *player, typical usage would be:

1
2
3
4
5
6
 
...
PtWavedata *data;
data = pt_player_get_data (player, 100);
pt_waveviewer_set_wave (PT_WAVEVIEWER (waveviewer), data);
pt_wavedata_free (data);
...

Functions

pt_wavedata_new ()

PtWavedata *
pt_wavedata_new (gfloat *array,
                 gint64 length,
                 guint channels,
                 guint px_per_sec);

Constructs a new PtWavedata.

Parameters

array

an array of floats.

[array length=length]

length

number of elements in array

  

channels

number of channels

  

px_per_sec

rate

  

Returns

new data, free after use with pt_wavedata_free().

[transfer full]

pt_wavedata_copy ()

PtWavedata *
pt_wavedata_copy (PtWavedata *data);

Creates a copy of data .

Parameters

data

the object to copy

  

Returns

a new PtWavedata, free after use with pt_wavedata_free()

pt_wavedata_free ()

void
pt_wavedata_free (PtWavedata *data);

Free's data .

Parameters

data

the object to be freed

  

Types and Values

struct PtWavedata

struct PtWavedata {
	gfloat *array;
	gint64  length;
	guint   channels;
	guint   px_per_sec;
};

Contains all information about the wave. Usually you don't have to access the struct's members.

Members

gfloat *array;

array of min/max values. One single sample is represented by a min value ranging from -1.0 to 0.0 and a max value ranging from 0.0 to 1.0. This is a simplified approach, as a sample is not a single point in time, but a min and a max value in a certain amount of time, e.g. 10 ms.

[array length=length]

gint64 length;

number of elements in array

  

guint channels;

number of channels for future use, currently it's always 1.

  

guint px_per_sec;

pixels/samples per second. For example 100 means one second in time is 100 pixels wide.

  
Generated by GTK-Doc V1.21
parlatype-1.5.4/libparlatype/docs/reference/html/up.png0000644000175000017500000000040413204324053020111 00000000000000PNG  IHDRabKGD pHYs B(xtIME IDAT81 @D{xa;$]r =JR1, Sd-}0̟oL:m-QO[ k TzMޠL,:ךu!tK; Pp Ot@l/̵*l}IENDB`parlatype-1.5.4/libparlatype/docs/reference/html/PtProgressDialog.html0000644000175000017500000003702313204324053023104 00000000000000 Parlatype Reference Manual: PtProgressDialog

PtProgressDialog

PtProgressDialog — Progress dialog while loading wave data.

Stability Level

Unstable, unless otherwise indicated

Functions

PtProgressDialog * pt_progress_dialog_new ()
void pt_progress_dialog_set_progress ()

Types and Values

struct PtProgressDialog

Object Hierarchy

    GObject
    ╰── GInitiallyUnowned
        ╰── GtkWidget
            ╰── GtkContainer
                ╰── GtkBin
                    ╰── GtkWindow
                        ╰── GtkDialog
                            ╰── GtkMessageDialog
                                ╰── PtProgressDialog

Implemented Interfaces

PtProgressDialog implements AtkImplementorIface and GtkBuildable.

Includes

#include <parlatype/pt-progress-dialog.h>

Description

PtProgressDialog is a ready to use dialog, intended to show progress while loading wave data. Note, that it is supposed to be shown via gtk_widget_show_all() and loading wave data should be done asynchronously. Using the synchronous version the dialog will not show up.

Assuming you have set up a PtPlayer *player, typical usage would be:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
 
static void
progress_response_cb (GtkWidget *dialog,
                      gint       response,
                      gpointer  *user_data)
{
    PtPlayer *player = (PtPlayer *) user_data;

    if (response == GTK_RESPONSE_CANCEL)
        pt_player_cancel (player);
}

...

static void
open_cb (PtPlayer     *player,
         GAsyncResult *res,
         gpointer     *user_data)
{
    PtProgressDialog *dlg = (PtProgressDialog *) user_data;
    gtk_widget_destroy (GTK_WIDGET (dlg));
    ...
}

...

progress_dlg = GTK_WIDGET (pt_progress_dialog_new (GTK_WINDOW (parent)));

g_signal_connect (progress_dlg,
                  "response",
                  G_CALLBACK (progress_response_cb),
                  player);

g_signal_connect_swapped (player,
                          "load-progress",
                          G_CALLBACK (pt_progress_dialog_set_progress),
                          PT_PROGRESS_DIALOG (progress_dlg));

gtk_widget_show_all (win->priv->progress_dlg);
pt_player_open_uri_async (player,
                          uri,
                          (GAsyncReadyCallback) open_cb,
                          progress_dlg);

Functions

pt_progress_dialog_new ()

PtProgressDialog *
pt_progress_dialog_new (GtkWindow *win);

A GtkMessageDialog with a label "Loading file...", a progress bar and a cancel button.

After use gtk_widget_destroy() it.

Parameters

win

parent window, NULL is allowed, but discouraged.

[allow-none]

Returns

a new PtProgressDialog.

[transfer none]

pt_progress_dialog_set_progress ()

void
pt_progress_dialog_set_progress (PtProgressDialog *dlg,
                                 gdouble progress);

Sets the progress bar to the new value.

Parameters

dlg

the dialog

  

progress

the new value for the progress bar, ranging from 0.0 to 1.0

  

Types and Values

struct PtProgressDialog

struct PtProgressDialog;

The PtProgressDialog contains only private fields and should not be directly accessed.

Generated by GTK-Doc V1.21
parlatype-1.5.4/libparlatype/docs/reference/html/style.css0000644000175000017500000002077013204324053020641 00000000000000body { font-family: cantarell, sans-serif; } .synopsis, .classsynopsis { /* tango:aluminium 1/2 */ background: #eeeeec; background: rgba(238, 238, 236, 0.5); border: solid 1px rgb(238, 238, 236); padding: 0.5em; } .programlisting { /* tango:sky blue 0/1 */ /* fallback for no rgba support */ background: #e6f3ff; border: solid 1px #729fcf; background: rgba(114, 159, 207, 0.1); border: solid 1px rgba(114, 159, 207, 0.2); padding: 0.5em; } .variablelist { padding: 4px; margin-left: 3em; } .variablelist td:first-child { vertical-align: top; } div.gallery-float { float: left; padding: 10px; } div.gallery-float img { border-style: none; } div.gallery-spacer { clear: both; } a, a:visited { text-decoration: none; /* tango:sky blue 2 */ color: #3465a4; } a:hover { text-decoration: underline; /* tango:sky blue 1 */ color: #729fcf; } div.informaltable table { border-collapse: separate; border-spacing: 1em 0.5em; border: none; } div.informaltable table td, div.informaltable table th { vertical-align: top; } .function_type, .variable_type, .property_type, .signal_type, .parameter_name, .struct_member_name, .union_member_name, .define_keyword, .datatype_keyword, .typedef_keyword { text-align: right; } /* dim non-primary columns */ .c_punctuation, .function_type, .variable_type, .property_type, .signal_type, .define_keyword, .datatype_keyword, .typedef_keyword, .property_flags, .signal_flags, .parameter_annotations, .enum_member_annotations, .struct_member_annotations, .union_member_annotations { color: #888a85; } .function_type a, .function_type a:visited, .function_type a:hover, .property_type a, .property_type a:visited, .property_type a:hover, .signal_type a, .signal_type a:visited, .signal_type a:hover, .signal_flags a, .signal_flags a:visited, .signal_flags a:hover { color: #729fcf; } td p { margin: 0.25em; } div.table table { border-collapse: collapse; border-spacing: 0px; /* tango:aluminium 3 */ border: solid 1px #babdb6; } div.table table td, div.table table th { /* tango:aluminium 3 */ border: solid 1px #babdb6; padding: 3px; vertical-align: top; } div.table table th { /* tango:aluminium 2 */ background-color: #d3d7cf; } h4 { color: #555753; } hr { /* tango:aluminium 1 */ color: #d3d7cf; background: #d3d7cf; border: none 0px; height: 1px; clear: both; margin: 2.0em 0em 2.0em 0em; } dl.toc dt { padding-bottom: 0.25em; } dl.toc > dd > dl > dt { padding-top: 0.25em; padding-bottom: 0.25em; } dl.toc > dt { padding-top: 1em; padding-bottom: 0.5em; font-weight: bold; } .parameter { font-style: normal; } .footer { padding-top: 3.5em; /* tango:aluminium 3 */ color: #babdb6; text-align: center; font-size: 80%; } .informalfigure, .figure { margin: 1em; } .informalexample, .example { margin-top: 1em; margin-bottom: 1em; } .warning { /* tango:orange 0/1 */ background: #ffeed9; background: rgba(252, 175, 62, 0.1); border-color: #ffb04f; border-color: rgba(252, 175, 62, 0.2); } .note { /* tango:chameleon 0/0.5 */ background: #d8ffb2; background: rgba(138, 226, 52, 0.1); border-color: #abf562; border-color: rgba(138, 226, 52, 0.2); } div.blockquote { border-color: #eeeeec; } .note, .warning, div.blockquote { padding: 0.5em; border-width: 1px; border-style: solid; margin: 2em; } .note p, .warning p { margin: 0; } div.warning h3.title, div.note h3.title { display: none; } p + div.section { margin-top: 1em; } div.refnamediv, div.refsynopsisdiv, div.refsect1, div.refsect2, div.toc, div.section { margin-bottom: 1em; } /* blob links */ h2 .extralinks, h3 .extralinks { float: right; /* tango:aluminium 3 */ color: #babdb6; font-size: 80%; font-weight: normal; } .lineart { color: #d3d7cf; font-weight: normal; } .annotation { /* tango:aluminium 5 */ color: #555753; font-weight: normal; } .structfield { font-style: normal; font-weight: normal; } acronym,abbr { border-bottom: 1px dotted gray; } /* code listings */ .listing_code .programlisting .normal, .listing_code .programlisting .normal a, .listing_code .programlisting .number, .listing_code .programlisting .cbracket, .listing_code .programlisting .symbol { color: #555753; } .listing_code .programlisting .comment, .listing_code .programlisting .linenum { color: #babdb6; } /* tango: aluminium 3 */ .listing_code .programlisting .function, .listing_code .programlisting .function a, .listing_code .programlisting .preproc { color: #204a87; } /* tango: sky blue 3 */ .listing_code .programlisting .string { color: #ad7fa8; } /* tango: plum */ .listing_code .programlisting .keyword, .listing_code .programlisting .usertype, .listing_code .programlisting .type, .listing_code .programlisting .type a { color: #4e9a06; } /* tango: chameleon 3 */ .listing_frame { /* tango:sky blue 1 */ border: solid 1px #729fcf; border: solid 1px rgba(114, 159, 207, 0.2); padding: 0px; } .listing_lines, .listing_code { margin-top: 0px; margin-bottom: 0px; padding: 0.5em; } .listing_lines { /* tango:sky blue 0.5 */ background: #a6c5e3; background: rgba(114, 159, 207, 0.2); /* tango:aluminium 6 */ color: #2e3436; } .listing_code { /* tango:sky blue 0 */ background: #e6f3ff; background: rgba(114, 159, 207, 0.1); } .listing_code .programlisting { /* override from previous */ border: none 0px; padding: 0px; background: none; } .listing_lines pre, .listing_code pre { margin: 0px; } @media screen { sup a.footnote { position: relative; top: 0em ! important; } /* this is needed so that the local anchors are displayed below the naviagtion */ div.footnote a[name], div.refnamediv a[name], div.refsect1 a[name], div.refsect2 a[name], div.index a[name], div.glossary a[name], div.sect1 a[name] { display: inline-block; position: relative; top:-5em; } /* this seems to be a bug in the xsl style sheets when generating indexes */ div.index div.index { top: 0em; } /* make space for the fixed navigation bar and add space at the bottom so that * link targets appear somewhat close to top */ body { padding-top: 2.5em; padding-bottom: 500px; max-width: 60em; } p { max-width: 60em; } /* style and size the navigation bar */ table.navigation#top { position: fixed; background: #e2e2e2; border-bottom: solid 1px #babdb6; border-spacing: 5px; margin-top: 0; margin-bottom: 0; top: 0; left: 0; z-index: 10; } table.navigation#top td { padding-left: 6px; padding-right: 6px; } .navigation a, .navigation a:visited { /* tango:sky blue 3 */ color: #204a87; } .navigation a:hover { /* tango:sky blue 2 */ color: #3465a4; } td.shortcuts { /* tango:sky blue 2 */ color: #3465a4; font-size: 80%; white-space: nowrap; } td.shortcuts .dim { color: #babdb6; } .navigation .title { font-size: 80%; max-width: none; margin: 0px; font-weight: normal; } } @media screen and (min-width: 60em) { /* screen larger than 60em */ body { margin: auto; } } @media screen and (max-width: 60em) { /* screen less than 60em */ #nav_hierarchy { display: none; } #nav_interfaces { display: none; } #nav_prerequisites { display: none; } #nav_derived_interfaces { display: none; } #nav_implementations { display: none; } #nav_child_properties { display: none; } #nav_style_properties { display: none; } #nav_index { display: none; } #nav_glossary { display: none; } .gallery_image { display: none; } .property_flags { display: none; } .signal_flags { display: none; } .parameter_annotations { display: none; } .enum_member_annotations { display: none; } .struct_member_annotations { display: none; } .union_member_annotations { display: none; } /* now that a column is hidden, optimize space */ col.parameters_name { width: auto; } col.parameters_description { width: auto; } col.struct_members_name { width: auto; } col.struct_members_description { width: auto; } col.enum_members_name { width: auto; } col.enum_members_description { width: auto; } col.union_members_name { width: auto; } col.union_members_description { width: auto; } .listing_lines { display: none; } } @media print { table.navigation { visibility: collapse; display: none; } div.titlepage table.navigation { visibility: visible; display: table; background: #e2e2e2; border: solid 1px #babdb6; margin-top: 0; margin-bottom: 0; top: 0; left: 0; height: 3em; } } parlatype-1.5.4/libparlatype/docs/reference/html/annotation-glossary.html0000644000175000017500000001016313204324053023663 00000000000000 Parlatype Reference Manual: Annotation Glossary

Annotation Glossary

A

allow-none

NULL is OK, both for passing and for returning.

array

Parameter points to an array of items.

C

closure

This parameter is a 'user_data', for callbacks; many bindings can pass NULL here.

S

scope async

The callback is valid until first called.

T

transfer full

Free data after the code is done.

transfer none

Don't free data after the code is done.

U

Unstable

Unstable interfaces are experimental or transitional. They are typically used to give outside developers early access to new or rapidly changing technology, or to provide an interim solution to a problem where a more general solution is anticipated. No claims are made about either source or binary compatibility from one minor release to the next. The Unstable interface level is a warning that these interfaces are subject to change without warning and should not be used in unbundled products. Given such caveats, customer impact need not be a factor when considering incompatible changes to an Unstable interface in a major or minor release. Nonetheless, when such changes are introduced, the changes should still be mentioned in the release notes for the affected release.

Generated by GTK-Doc V1.21
parlatype-1.5.4/libparlatype/docs/reference/html/parlatype.devhelp20000644000175000017500000002065113204324053022421 00000000000000 parlatype-1.5.4/libparlatype/docs/reference/html/introduction.html0000644000175000017500000000432513204324053022374 00000000000000 Parlatype Reference Manual: Introduction

Introduction

Parlatype (that is libparlatype) is the core library for the Parlatype program, a basic audio player intended for speech transcription. The library is published separately as it might be useful for other applicatons as well.

PtPlayer is the core GStreamer backend that can be used as an audio player. It uses internally PtWaveloader to extract the wave form from a given file. This data is boxed in a PtWavedata struct that can be passed to PtWaveviewer, a GtkWidget showing the wave form.

This is the first public release of Parlatype, it is still unstable and might change with the next minor release.

Generated by GTK-Doc V1.21
parlatype-1.5.4/libparlatype/docs/reference/html/pt03.html0000644000175000017500000000405013204324053020434 00000000000000 Parlatype Reference Manual: Part III. GtkWidgets

Part III. GtkWidgets

Table of Contents

Widget gallery
PtProgressDialog — Progress dialog while loading wave data.
PtWaveviewer — A GtkWidget to display a waveform.
Generated by GTK-Doc V1.21
parlatype-1.5.4/libparlatype/docs/reference/html/pt-waveviewer.png0000644000175000017500000001644213204324053022303 00000000000000PNG  IHDRu2bKGD pHYs  tIME1✑IDATx{\Te ̀8,0/Ix VЬZܬV7tmi_KnmeRy)K-j% x&΀03ܙ933g<9GRYYʇI@DD$>_?999L """7KLL4 ”!޽L#_|5Z}MqWX6'Mb"xlMD^'$-  $- E0y<S aB0͘٠Am~/4A3f0$>>蕞1X֮V10[&b&"r!fF1001110011001BJJ*LNJB;c'|-Zex"9q_w08:1U*5@'=ҡp~>XMtQ˵Z:^P1|8Nʕ_qy}w uUC]Sc8^yE gO&<wٲu`CV\r\A0=#ΟGq%@p`/\r+WASJ=z9Uj5pq@*BVAu?pF 3Y4 `j|</wݰi3TgfaC tS+W\zF6-y(8qÇŴvڷ2g;I8^P QwE  S+JfީV=z85_::C+/5! iRRswA`(rli D ^(=#/\ mPbXȣvhH(F2wU ӓfb!t{5f9Eg0?u޲u!eg#:*]ӅE A#ݝR%%¡]h6 h> 6tKZ벳۴0ީc}u[sWʤx|l@ɥ(&HQQ,\lm8]XQ&,0]ӥR999HIIcdN\v:z~ql5{;ֽ1#PQQJQXj/Znv0십nC޽wG<]yyV}áT*q5 sf?֮1=uC<p=v1܃Ncؐ޽ 4+P{D}#& xke-o. t$ƍys=SزufH峄WGo G/vsAIl˜=~8v3w͖jzFakWXcƱ5 'tE[֋.K1LOp2Uofil\W>s"8A,foo- 㧝M KČ9띪t?pjיҺ2?u.2LR4. zf+$nYr}r\$mZ[?qk㫯Mbqetk݋.hbw`3O`dL TjXkO]Sbczgd:7|og+[ 8օf wowK{NَPFO6mVe<|uIdfV0%:]{߆Y(8q1\kI+̤LLK8br^z,! }c`W_|PX-L5B¹ :aaA ;uho8!bN_{B1|8JJ˸??)u튫^~2dGv\-+C]HdDo `'RJSl= /މUXz͇m?m*+ǣwx8u DzF&KJPWWۧzcU힩 aK_^pFsѱ\>i'-%= ޴ݟ *x[ xZV Fyyv}KYǞME>p"nܸjmbY?G=avA{ݽ>RX0թxM0 _{j07{ZB-k|;q BdDaُ֜YG??_tME}}} =!bH'Idٖ6,m A`` Tt豄k,mU%5;r Gxh6Zവx7> spT-$5l\544,kkZ-Dѣ7QԨDLe4<(ma'-ma*Q\RBnRᯫ N!; &Nl2@kM])~ 1$ERX=2)^bu?={0V1z<8LҹȦf$ylw#gO.k잺}wq._l -˳ܲ_=kbcQYUvuzGfpH0{>Xh*`e޺ PW_'NUo1=:UxxQ\l,-[ep(CM^fvñ?k`Wߊ"#"vy:h}Lȅhll@A\t:\~rS&MD^RAHxXhhs]kҹUЈ벳0xbʀqL&ţ? xkr9}Ts+{[%+g!-bU*w㶱˳0-!dBr\?M&t , a+ bW.Ac-3if7NfN?O$'5kٺb-͚{ˑLnM:T$E]]=$a[7ZɥK.UH|f}}}׷}͓))ɤ dR: R@6bKm@. mA.IANWHw#A#k]n:΂v˲cg.IS> . ˲L'mج¸'(MXhLIdz[@l#DFD*,h]z;޽7wԣz4Uҳ',v i/AYI JԄcǚ%٣ScdO047 #4YGz:lςf@enFogmh{ӽ=&e)/,TFh3w`_&G'-Z 6\lu]1\D$ ""b&""b&"""`"""`"""b&""b&"""`"""`"""b&""b&""b&"""`"""`"""b&""b&"""`"""`"""b&""b&""b&"""`""[UUU&6y3fg|p78s|͏8k!s?Bx(/>q027&(C`d]~'C`W q<ք9оqQ=*^|p}>/%x̚93#ѣGO2>H&$FTMT S0v?g]`;[C~IxuqlGɏH|"^̞|pu>h+Q~Q gA|Lq=ZɯM@("E+LNaP[I͉ob_8+|v\r>h`O^E]G@? s\2ſu(b ~w"/^o?f Ǡ)ϩET7@i%"6G7x}Hu|q\r>4\Y cƂW ]܇w^Cϛxw!ew?UZx>_ܕ: e *A#/c2?:h}Bq3#?@H{ގ CdL{1_vn X9;?'f>4A ŐĐ~A6_C6qlZ0fG顪uu=tСz54Gn`7_9»WUt @rb_SذMf":-j>4\aB.M454@/S@HlwZ:,H^gO&w-Ɩ[_Q|܌ xk9܈- g>a,}Dnu(cm X*\Q/0~UlSyX&g( `KL½-:M jQFPV]|#_͘NM\{*Z>s\r>H79~˱2gsRz~ rQ0¶M!6W4T "7<'hݜqo?oJü 7fJLy<~n'lD <7^x"!!M<36?Z.5ee4?4'A"ȴ`{1k!H!1yZfLDDLDDD.µ.je^/ \ "sP(ܨ=^Ǎ: /0ue<""`V=h4aɼg/9#"`$BCzz͹2C:\~} {I$_߾w !ːAK&""b&"""L!""Rd ""<{sկs/IENDB`parlatype-1.5.4/libparlatype/docs/reference/html/right.png0000644000175000017500000000040513204324053020603 00000000000000PNG  IHDRabKGD pHYs B(xtIME!GIDAT8үa?MIdEr,-hAIl ry}sX6 !9#D r$-Br$G"$;WZ&!cq \`軀O=QoufIENDB`parlatype-1.5.4/libparlatype/docs/reference/html/index.sgml0000644000175000017500000003074713204324053020767 00000000000000 parlatype-1.5.4/libparlatype/docs/reference/html/left.png0000644000175000017500000000040613204324053020421 00000000000000PNG  IHDRabKGD pHYs B(xtIME,`m;IDAT8үa?DAPY\$[p+IIMlf('}Mpy{_ޥ}^q xZ <=Yj) <04\~+Pl#",Qϑp Iǐlsw>[/]_i03IENDB`parlatype-1.5.4/libparlatype/docs/reference/html/pt-progress-dialog.png0000644000175000017500000001163413204324053023216 00000000000000PNG  IHDR #sBIT|dtEXtSoftwaregnome-screenshot>.IDATxy|H2 p_$Vh֪At[v[Z]-ݺ*ҭJqW%`\!L3CL2f&/~17d !B!.BtOYVv/+R%AL )UUz6~`ҥӀԠRCO8E^Wzx}'B rrqVpnUٰvԜ tƸB|L&O4)o +V̚3gC.+Bxow18uUO0u5 !N<@Ӂ/ɡGB`84U] !頋}ThF>릅,}}a 1pBxR Nʈ*HP)}Q   # AB$Bh 2 T!4@J_!4@FT!4@*H+Ȉ*HP  AB$BhU T!4@*HP  Ah<-soD ԞhO}g-yU}&] Z;|)sҷ߯葐gψ|16>bGxi>^_D6qF#AtFٶ Lf\QH^5,1 B޶r\?l5/' I =?h1?331[ScK!Jo>IcX拇P{S80e˿\޿]so]!n]Ġ䶥p٬סzx(ז33U<'9yMoP*{O}A~ʽma%qKG`wef~oȜWe/̧0͈)6Ľ/)}3& /o<3]hNrō1[>20;?},yCG2ɤwT\wWNC|Yd5s j>6P+I^OCrc3u?U)K"1uW/݁wp~{R-d2&܏Ҙ9 Էy I͇/fme k j6}70A\5R3*;cb]).#jޒM7jGWQI!7Ij/ð8p-Oks䄃R{sI|Rk s/RI0 _<ηhrK%oOgm67újrl>̫ay33RT{+6 ـ]ޢ>%v|5Su|ݑwOq,q jk>c>>NYRQVCMM=δKzQQ^'멭:ݥ4W ܰ}k1Q{UϫJ?ӥuXf5Ko{f%%(o&%OgLI4fk~^^Uv# HOo{VrռǬq1 wkxHg/Sp7)9SMkPS F9$ep?ͭ?'/__􏌌ڃ;R,y]gaR"kObݺ2HyAËF{d$dc歿oTdU~&B T!4@*HP  AB$BhU T!4@* 'ʇiɕ^1{r6WODdbȐ!L2+ L>KnJ/_Șx9xN,;U͔R\\]ȀqB>7xU+QLyyyw#b>F! _x:6|P|c'U,餘v;./cup'O6FjDn-]b3v K0 f沂TCgql7YLQd'*-KE8^O;ڿm muܱ*w_+fѤsia^Z7}ܰT䂈N#I'Do3M{s67 8RJ1nڛNQҁftvaQW@ܰ|2LQu6R}A模$@u|kWќNnN&ڱ64nQ0[I祣zsy)N*=||{Ff}sZ**zCa=LZNTU@GRP.ܲNQk&;B\prAD jccS:#hD jSsso"fh})}a'HO 5!荊5>j  Q=a10`R>ij$!b豈TUU] (}G*Af}Djmߥ GUkjjaCC Na\ΡUCK,٦j̙g::p\vǶm>`vn^ cuUUUMc2t{zdg{>1,/]r?899?pPsr8I)Ǫ_弡dfd[l{h\po_O@ 0aڵW͛7nEQE/4ޱiӦNhw:[utj/#M6vٲe_?~lɔb!"vmmm{=޽{w%pra0m=CUV/ 儠)=ӋZ`r_  ց<9708? HP)5֋/_[U7?9o.$BD"TPF'CPÍ^΍ ܯ@ T! j [| 685dP $^h*!{5\Az!|um4%q JXsG}tR! qC {.]t 3 uGVB!Ϟx{QTIENDB`parlatype-1.5.4/libparlatype/docs/reference/html/pt04.html0000644000175000017500000000375013204324053020443 00000000000000 Parlatype Reference Manual: Part IV. Internals: Get Wavedata

Part IV. Internals: Get Wavedata

Table of Contents

PtWavedata — A boxed type with wave data.
PtWaveloader — Loads the waveform for a given file.
Generated by GTK-Doc V1.21
parlatype-1.5.4/libparlatype/docs/reference/html/index.html0000644000175000017500000000600213204324053020754 00000000000000 Parlatype Reference Manual: Parlatype Reference Manual

Gabor Karsay

for parlatype 1.5.4 .

I. Overview
Introduction
Using the library
A python example
II. Main backend: PtPlayer
PtPlayer — The GStreamer backend for Parlatype.
III. GtkWidgets
Widget gallery
PtProgressDialog — Progress dialog while loading wave data.
PtWaveviewer — A GtkWidget to display a waveform.
IV. Internals: Get Wavedata
PtWavedata — A boxed type with wave data.
PtWaveloader — Loads the waveform for a given file.
Object Hierarchy
API Index
Annotation Glossary
Generated by GTK-Doc V1.21
parlatype-1.5.4/libparlatype/docs/reference/html/PtWaveloader.html0000644000175000017500000005300013204324053022242 00000000000000 Parlatype Reference Manual: PtWaveloader

PtWaveloader

PtWaveloader — Loads the waveform for a given file.

Stability Level

Unstable, unless otherwise indicated

Functions

PtWaveloader * pt_waveloader_new ()
gboolean pt_waveloader_load_finish ()
void pt_waveloader_load_async ()
gint64 pt_waveloader_get_duration ()
PtWavedata * pt_waveloader_get_data ()

Properties

gchar * uri Read / Write / Construct

Signals

void progress Run First

Types and Values

struct PtWaveloader

Object Hierarchy

    GObject
    ╰── PtWaveloader

Includes

#include <parlatype/pt-waveloader.h>

Description

An object to load waveform data from an audio file. The raw data can be used by a widget to visually represent a waveform.

Functions

pt_waveloader_new ()

PtWaveloader *
pt_waveloader_new (gchar *uri);

Returns a new PtWaveloader. The uri is not checked on construction, but calling pt_waveloader_load_async() will fail with an error message.

After use g_object_unref() it.

Parameters

uri

URI of the audio file to load.

[allow-none]

Returns

a new PtWaveloader.

[transfer full]

pt_waveloader_load_finish ()

gboolean
pt_waveloader_load_finish (PtWaveloader *wl,
                           GAsyncResult *result,
                           GError **error);

Gives the result of the async load operation. A cancelled operation results in an error, too.

Parameters

wl

a PtWaveloader

  

result

the GAsyncResult passed to your GAsyncReadyCallback

  

error

a pointer to a NULL GError, or NULL.

[allow-none]

Returns

TRUE if successful, or FALSE with error set

pt_waveloader_load_async ()

void
pt_waveloader_load_async (PtWaveloader *wl,
                          GCancellable *cancellable,
                          GAsyncReadyCallback callback,
                          gpointer user_data);

Writes the raw sample data to a temporary file and also gets the number of channels, the bit rate and the exact duration. Load only once and on success the data can be retrieved as a PtWavedata. It's a programmer's error trying to retrieve the data without prior loading.

Emits a progress signal while saving the temporary file.

In your callback call pt_waveloader_load_finish to get the result of the operation.

Parameters

wl

a PtWaveloader

  

cancellable

a GCancellable or NULL.

[allow-none]

callback

a GAsyncReadyCallback to call when the operation is complete.

[scope async]

user_data

user_data for callback.

[closure]

pt_waveloader_get_duration ()

gint64
pt_waveloader_get_duration (PtWaveloader *wl);

Returns the duration of stream. As the whole stream is scanned, this is supposed to be an exact duration, not an estimate.

Parameters

wl

a PtWaveloader

  

Returns

duration in nanoseconds as used by GStreamer

pt_waveloader_get_data ()

PtWavedata *
pt_waveloader_get_data (PtWaveloader *wl,
                        gint pps);

Returns wave data needed for visual representation as raw data. The requested resolution is given as pixel per seconds, e.g. 100 means one second is represented by 100 samples, is 100 pixels wide. The returned resolution doesn't have to be necessarily exactly the requested resolution, it might be a bit differnt, depending on the bit rate.

Parameters

wl

a PtWaveloader

  

pps

the requested pixel per second ratio

  

Returns

the PtWavedata, after use free with pt_wavedata_free().

[transfer full]

Types and Values

struct PtWaveloader

struct PtWaveloader;

The PtWaveloader contains only private fields and should not be directly accessed.

Property Details

The “uri” property

  “uri”                      gchar *

URI of the audio file.

Flags: Read / Write / Construct

Default value: ""

Signal Details

The “progress” signal

void
user_function (PtWaveloader *wl,
               gdouble       progress,
               gpointer      user_data)

Indicates progress on a scale from 0.0 to 1.0, however it does not emit the value 0.0 nor 1.0. Wait for a successful operation until any gui element showing progress is dismissed.

Parameters

wl

the waveloader emitting the signal

  

progress

the new progress state, ranging from 0.0 to 1.0

  

user_data

user data set when the signal handler was connected.

  

Flags: Run First

Generated by GTK-Doc V1.21
parlatype-1.5.4/libparlatype/docs/reference/html/PtWaveviewer.html0000644000175000017500000006166213204324053022312 00000000000000 Parlatype Reference Manual: PtWaveviewer

PtWaveviewer

PtWaveviewer — A GtkWidget to display a waveform.

Stability Level

Unstable, unless otherwise indicated

Functions

GtkWidget * pt_waveviewer_new ()
void pt_waveviewer_set_wave ()
void pt_waveviewer_set_follow_cursor ()
gboolean pt_waveviewer_get_follow_cursor ()

Properties

gboolean fixed-cursor Read / Write / Construct
gboolean follow-cursor Read / Write / Construct
gboolean has-selection Read
gint64 playback-cursor Write
gint64 selection-end Read
gint64 selection-start Read
gboolean show-ruler Read / Write / Construct

Signals

void cursor-changed Run First
void play-toggled Run First
void selection-changed Run First

Types and Values

struct PtWaveviewer

Object Hierarchy

    GObject
    ╰── GInitiallyUnowned
        ╰── GtkWidget
            ╰── GtkContainer
                ╰── GtkBin
                    ╰── GtkScrolledWindow
                        ╰── PtWaveviewer

Implemented Interfaces

PtWaveviewer implements AtkImplementorIface and GtkBuildable.

Includes

#include <parlatype/pt-waveviewer.h>

Description

Displays a waveform provided by PtPlayer or PtWaveloader.

Functions

pt_waveviewer_new ()

GtkWidget *
pt_waveviewer_new (void);

Create a new, initially blank waveform viewer widget. Use pt_waveviewer_set_wave() to pass wave data.

After use gtk_widget_destroy() it.

Returns

the widget

pt_waveviewer_set_wave ()

void
pt_waveviewer_set_wave (PtWaveviewer *self,
                        PtWavedata *data);

Set wave data to show in the widget. The data is copied internally and may be freed immediately after calling this function. If data is NULL, a blank widget is drawn.

Parameters

self

the widget

  

data

a PtWavedata.

[allow-none]

pt_waveviewer_set_follow_cursor ()

void
pt_waveviewer_set_follow_cursor (PtWaveviewer *self,
                                 gboolean follow);

Set follow-cursor option to TRUE or FALSE. See also “follow-cursor”.

Parameters

self

the widget

  

follow

new value

  

pt_waveviewer_get_follow_cursor ()

gboolean
pt_waveviewer_get_follow_cursor (PtWaveviewer *self);

Get follow-cursor option.

Parameters

self

the widget

  

Returns

TRUE if cursor is followed, else FALSE

Types and Values

struct PtWaveviewer

struct PtWaveviewer;

The PtWaveviewer contains only private fields and should not be directly accessed.

Property Details

The “fixed-cursor” property

  “fixed-cursor”             gboolean

If TRUE, in follow-cursor mode the cursor is at a fixed position and the waveform is scrolling. If FALSE the cursor is moving.

If “follow-cursor” is FALSE, this has no effect.

Flags: Read / Write / Construct

Default value: TRUE

The “follow-cursor” property

  “follow-cursor”            gboolean

If the widget follows the cursor, it scrolls automatically to the cursor's position. Note that the widget will change this property to FALSE if the user scrolls the widget manually.

Flags: Read / Write / Construct

Default value: TRUE

The “has-selection” property

  “has-selection”            gboolean

Whether something is selected (TRUE) or not (FALSE).

Flags: Read

Default value: FALSE

The “playback-cursor” property

  “playback-cursor”          gint64

Current playback position in milliseconds.

Flags: Write

Allowed values: >= 0

Default value: 0

The “selection-end” property

  “selection-end”            gint64

End time of selection in milliseconds. If it's equal to the start time, there is no selection. See also “has-selection”.

Flags: Read

Allowed values: >= 0

Default value: 0

The “selection-start” property

  “selection-start”          gint64

Start time of selection in milliseconds. If it's equal to the end time, there is no selection. See also “has-selection”.

Flags: Read

Allowed values: >= 0

Default value: 0

The “show-ruler” property

  “show-ruler”               gboolean

Whether the ruler is shown (TRUE) or not (FALSE).

Flags: Read / Write / Construct

Default value: TRUE

Signal Details

The “cursor-changed” signal

void
user_function (PtWaveviewer *viewer,
               gint64        position,
               gpointer      user_data)

Signals that the cursor's position was changed by the user.

Parameters

viewer

the waveviewer emitting the signal

  

position

the new position in stream in milliseconds

  

user_data

user data set when the signal handler was connected.

  

Flags: Run First

The “play-toggled” signal

void
user_function (PtWaveviewer *viewer,
               gpointer      user_data)

Signals that the user requested to toggle play/pause.

Parameters

viewer

the waveviewer emitting the signal

  

user_data

user data set when the signal handler was connected.

  

Flags: Run First

The “selection-changed” signal

void
user_function (PtWaveviewer *viewer,
               gpointer      user_data)

Signals that the selection was changed (or unselected) by the user. To query the new selection see “has-selection”, “selection-start” and “selection-end”.

Parameters

viewer

the waveviewer emitting the signal

  

user_data

user data set when the signal handler was connected.

  

Flags: Run First

Generated by GTK-Doc V1.21
parlatype-1.5.4/libparlatype/docs/reference/html/using_library.html0000644000175000017500000000437313204324053022527 00000000000000 Parlatype Reference Manual: Using the library

Using the library

Programs using libparlatype written in C can be compiled with GCC using:


      gcc `pkg-config --cflags parlatype` -o example example.c `pkg-config --libs parlatype`
    

There are bindings for other languages, e.g. in Python Parlatype can be imported like this:


      from gi.repository import Parlatype
    

There is a glade catalog for PtWaveviewer so you can include it in your glade projects.

Generated by GTK-Doc V1.21
parlatype-1.5.4/libparlatype/docs/reference/html/home.png0000644000175000017500000000040013204324053020411 00000000000000PNG  IHDRabKGD pHYs B(xtIME &IDAT8ҽ Aߞf`n v`6`/`Yܡ`f&k$,} 0b+ԸaQW~b O e{y N[L}.piBzmm o.I]7^[;%:VIENDB`parlatype-1.5.4/libparlatype/docs/reference/html/left-insensitive.png0000644000175000017500000000061313204324053022757 00000000000000PNG  IHDRabKGD pHYs B(xtIMEƫqIDAT8͒NQ@pds`*4@W@ A!Ԇ@6^ 5hxIH R`sQp̙339B|sKEQTK@۝΁i^~Wʆ`0TJ6TcYn6A ƀ~߱>}ǭs; lYkwr 5U= /" "uU=ɲlArDzp5I4^E+P3Ɯq_p ̥iUYp=#IENDB`parlatype-1.5.4/libparlatype/docs/reference/html/python_example.html0000644000175000017500000003550313204324053022711 00000000000000 Parlatype Reference Manual: A python example

A python example

This is a complete working example of how to use PtPlayer with Python:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
 
#!/usr/bin/env python3
# -*- coding: utf-8 -*-

""" parlatype-example.py demonstrates libparlatype.
    Change testfile to an existing file! """

import gi
from gi.repository import Parlatype as Pt
from gi.repository import Gtk
from gi.repository import GObject  # for GObject.timeout
gi.require_version('Gtk', '3.0')

testfile = "file:///home/user/example.mp3"


def error_message(message, parent):
    msg = Gtk.MessageDialog(parent=parent,
                            flags=Gtk.DialogFlags.MODAL,
                            type=Gtk.MessageType.ERROR,
                            buttons=Gtk.ButtonsType.OK,
                            message_format=message)
    msg.run()
    msg.destroy()


""" PtPlayer's error signal.
    It's a severe error and the PtPlayer is reset. There is not much we can
    do about it, here we simply quit. """


def player_error(player, error):
    error_message(error.args[0], win)
    Gtk.main_quit


""" PtPlayer's end-of-stream signal.
    Player is at the end and changes to paused state. Note that stream means
    any playable source like files, too.
    We set our buttons according to the state. """


def player_end_of_stream(player):
    button.set_active(False)


""" The two main functions are Pt.Player.play() and Pt.Player.pause().
    PtWaveviewer scrolls to cursor (follow-cursor) by default but if the user
    has scrolled manually follow-cursor is set to False. Here we assume that on
    play the user wants to follow cursor again. """


def button_toggled(button):
    if button.get_active():
        viewer.set_property("follow-cursor", True)
        player.play()
    else:
        player.pause()


""" In this timeout callback we update cursor position and time label. """


def update_cursor():
    viewer.set_property("playback-cursor", player.get_position())
    text = player.get_current_time_string(Pt.PrecisionType.SECOND_10TH)
    # Sometimes the position can't be retrieved and None is returned.
    if (text):
        label.set_text(text)
    # Continue updating
    return True


""" PtWaveviewer's cursor-changed signal.
    This means the user clicked on the widget to change cursor position.
    We have to inform the PtPlayer. We set the follow-cursor property, too. """


def cursor_changed(viewer, position):
    player.jump_to_position(position)
    viewer.set_property("follow-cursor", True)


""" Player's open async callback.
    Destroy progress dialog and get result. On success get wave data and pass
    it to the PtWaveviewer. Add a timeout of 10 ms to update cursor position
    and time label. """


def open_callback(player, result):
    progress.destroy()
    try:
        player.open_uri_finish(result)
        # Get data at a resolution of 100 px per second
        data = player.get_data(100)
        viewer.set_wave(data)
        GObject.timeout_add(10, update_cursor)
    except Exception as err:
        error_message(err.args[0], win)


""" Pass PtPlayer's emitted progress signal to the PtProgressDialog. """


def progress_update_callback(player, value, dialog):
    dialog.set_progress(value)


""" PtPlayer's async open function can be cancelled.
    This emits an error message for the open callback. """


def progress_response_callback(progress, response):
    if response == Gtk.ResponseType.CANCEL:
        player.cancel()


if testfile == "file:///home/user/example.mp3":
    error_message("Please change 'file:///home/user/example.mp3' in source "
                  "to an existing test file.", None)
    exit()

# PtPlayer has a failable constructor, if GStreamer can't be initted.
try:
    player = Pt.Player.new()
except Exception as err:
    error_message(err.args[0], None)
    exit()

player.connect("error", player_error)
player.connect("end-of-stream", player_end_of_stream)
# For the PtProgressDialog we have to use the async opening function
player.open_uri_async(testfile, open_callback)

# Now create the window with play button, PtWaveviewer and time label.
win = Gtk.Window()
win.set_border_width(12)
win.set_default_size(500, 80)
win.connect("delete-event", Gtk.main_quit)

viewer = Pt.Waveviewer.new()
viewer.connect("cursor-changed", cursor_changed)

button = Gtk.ToggleButton.new_with_label("Play")
button.connect("toggled", button_toggled)

label = Gtk.Label("0:00.0")

hbox = Gtk.Box(spacing=6)
hbox.pack_start(button, False, False, 0)
hbox.pack_start(viewer, True, True, 0)
hbox.pack_start(label, False, False, 0)
win.add(hbox)
win.show_all()

# PtProgressDialog, connect signals and show only, do not progress.run()
progress = Pt.ProgressDialog.new(win)
progress.connect("response", progress_response_callback)
player.connect("load-progress", progress_update_callback, progress)
progress.show_all()

Gtk.main()
Generated by GTK-Doc V1.21
parlatype-1.5.4/libparlatype/docs/reference/html/pt02.html0000644000175000017500000000350613204324053020440 00000000000000 Parlatype Reference Manual: Part II. Main backend: PtPlayer

Part II. Main backend: PtPlayer

Table of Contents

PtPlayer — The GStreamer backend for Parlatype.
Generated by GTK-Doc V1.21
parlatype-1.5.4/libparlatype/docs/reference/html/api-index-full.html0000644000175000017500000004145013204324053022471 00000000000000 Parlatype Reference Manual: API Index

API Index

P

PtPlayer, struct in PtPlayer
PtPlayer::end-of-stream, object signal in PtPlayer
PtPlayer::error, object signal in PtPlayer
PtPlayer::load-progress, object signal in PtPlayer
PtPlayer:speed, object property in PtPlayer
PtPlayer:volume, object property in PtPlayer
pt_player_cancel, function in PtPlayer
pt_player_clear_selection, function in PtPlayer
pt_player_fast_forward, function in PtPlayer
pt_player_get_current_time_string, function in PtPlayer
pt_player_get_data, function in PtPlayer
pt_player_get_duration, function in PtPlayer
pt_player_get_duration_time_string, function in PtPlayer
pt_player_get_filename, function in PtPlayer
pt_player_get_permille, function in PtPlayer
pt_player_get_position, function in PtPlayer
pt_player_get_timestamp, function in PtPlayer
pt_player_get_time_string, function in PtPlayer
pt_player_get_uri, function in PtPlayer
pt_player_goto_timestamp, function in PtPlayer
pt_player_jump_relative, function in PtPlayer
pt_player_jump_to_permille, function in PtPlayer
pt_player_jump_to_position, function in PtPlayer
pt_player_mute_volume, function in PtPlayer
pt_player_new, function in PtPlayer
pt_player_open_uri, function in PtPlayer
pt_player_open_uri_async, function in PtPlayer
pt_player_open_uri_finish, function in PtPlayer
pt_player_pause, function in PtPlayer
pt_player_play, function in PtPlayer
pt_player_rewind, function in PtPlayer
pt_player_set_selection, function in PtPlayer
pt_player_set_speed, function in PtPlayer
pt_player_set_volume, function in PtPlayer
pt_player_string_is_timestamp, function in PtPlayer
PtPrecisionType, enum in PtPlayer
PtProgressDialog, struct in PtProgressDialog
pt_progress_dialog_new, function in PtProgressDialog
pt_progress_dialog_set_progress, function in PtProgressDialog

W

PtWavedata, struct in PtWavedata
pt_wavedata_copy, function in PtWavedata
pt_wavedata_free, function in PtWavedata
pt_wavedata_new, function in PtWavedata
PtWaveloader, struct in PtWaveloader
PtWaveloader::progress, object signal in PtWaveloader
PtWaveloader:uri, object property in PtWaveloader
pt_waveloader_get_data, function in PtWaveloader
pt_waveloader_get_duration, function in PtWaveloader
pt_waveloader_load_async, function in PtWaveloader
pt_waveloader_load_finish, function in PtWaveloader
pt_waveloader_new, function in PtWaveloader
PtWaveviewer, struct in PtWaveviewer
PtWaveviewer::cursor-changed, object signal in PtWaveviewer
PtWaveviewer::play-toggled, object signal in PtWaveviewer
PtWaveviewer::selection-changed, object signal in PtWaveviewer
PtWaveviewer:fixed-cursor, object property in PtWaveviewer
PtWaveviewer:follow-cursor, object property in PtWaveviewer
PtWaveviewer:has-selection, object property in PtWaveviewer
PtWaveviewer:playback-cursor, object property in PtWaveviewer
PtWaveviewer:selection-end, object property in PtWaveviewer
PtWaveviewer:selection-start, object property in PtWaveviewer
PtWaveviewer:show-ruler, object property in PtWaveviewer
pt_waveviewer_get_follow_cursor, function in PtWaveviewer
pt_waveviewer_new, function in PtWaveviewer
pt_waveviewer_set_follow_cursor, function in PtWaveviewer
pt_waveviewer_set_wave, function in PtWaveviewer
Generated by GTK-Doc V1.21
parlatype-1.5.4/libparlatype/docs/reference/introduction.xml0000644000175000017500000000166013176574164021305 00000000000000 Introduction Parlatype (that is libparlatype) is the core library for the Parlatype program, a basic audio player intended for speech transcription. The library is published separately as it might be useful for other applicatons as well. PtPlayer is the core GStreamer backend that can be used as an audio player. It uses internally PtWaveloader to extract the wave form from a given file. This data is boxed in a PtWavedata struct that can be passed to PtWaveviewer, a GtkWidget showing the wave form. This is the first public release of Parlatype, it is still unstable and might change with the next minor release. parlatype-1.5.4/libparlatype/docs/reference/gallery.xml0000644000175000017500000000121213176574164020214 00000000000000 Widget gallery Parlatype provides two GtkWidgets, PtProgressDialog and PtWaveviewer. parlatype-1.5.4/libparlatype/docs/reference/parlatype-sections.txt0000644000175000017500000000410613204324053022405 00000000000000
pt-player PtPlayer PtPlayer pt_player_new pt_player_open_uri_async pt_player_open_uri_finish pt_player_open_uri pt_player_cancel pt_player_play pt_player_pause pt_player_set_selection pt_player_clear_selection pt_player_jump_relative pt_player_jump_to_position pt_player_jump_to_permille pt_player_get_permille pt_player_set_speed pt_player_set_volume pt_player_mute_volume pt_player_rewind pt_player_fast_forward pt_player_get_position pt_player_get_duration pt_player_get_uri pt_player_get_filename pt_player_get_time_string pt_player_get_current_time_string pt_player_get_duration_time_string pt_player_get_timestamp pt_player_string_is_timestamp pt_player_goto_timestamp pt_player_get_data PtPrecisionType PT_IS_PLAYER PT_PLAYER PT_TYPE_PLAYER PtPlayerClass PtPlayerPrivate pt_player_get_type
pt-waveloader PtWaveloader PtWaveloader pt_waveloader_new pt_waveloader_load_finish pt_waveloader_load_async pt_waveloader_get_duration pt_waveloader_get_data PT_IS_WAVELOADER PT_TYPE_WAVELOADER PT_WAVELOADER PtWaveloaderClass PtWaveloaderPrivate pt_waveloader_get_type
pt-waveviewer PtWaveviewer PtWaveviewer pt_waveviewer_new pt_waveviewer_set_wave pt_waveviewer_set_follow_cursor pt_waveviewer_get_follow_cursor PT_IS_WAVEVIEWER PT_IS_WAVEVIEWER_CLASS PT_TYPE_WAVEVIEWER PT_WAVEVIEWER PT_WAVEVIEWER_CLASS PtWaveviewerClass PtWaveviewerPrivate pt_waveviewer_get_type parlatype_get_resource
pt-progress-dialog PtProgressDialog PtProgressDialog pt_progress_dialog_new pt_progress_dialog_set_progress PT_IS_PROGRESS_DIALOG PT_PROGRESS_DIALOG PT_TYPE_PROGRESS_DIALOG PtProgressDialogClass PtProgressDialogPrivate pt_progress_dialog_get_type
pt-wavedata PtWavedata PtWavedata pt_wavedata_new pt_wavedata_copy pt_wavedata_free PT_TYPE_WAVEDATA pt_wavedata_get_type
parlatype-1.5.4/libparlatype/docs/reference/python_example.xml0000644000175000017500000000110513171727132021600 00000000000000 A python example This is a complete working example of how to use PtPlayer with Python: MISSING XINCLUDE CONTENT parlatype-1.5.4/libparlatype/docs/reference/parlatype-example.py0000755000175000017500000001120413200401131022007 00000000000000#!/usr/bin/env python3 # -*- coding: utf-8 -*- """ parlatype-example.py demonstrates libparlatype. Change testfile to an existing file! """ import gi from gi.repository import Parlatype as Pt from gi.repository import Gtk from gi.repository import GObject # for GObject.timeout gi.require_version('Gtk', '3.0') testfile = "file:///home/user/example.mp3" def error_message(message, parent): msg = Gtk.MessageDialog(parent=parent, flags=Gtk.DialogFlags.MODAL, type=Gtk.MessageType.ERROR, buttons=Gtk.ButtonsType.OK, message_format=message) msg.run() msg.destroy() """ PtPlayer's error signal. It's a severe error and the PtPlayer is reset. There is not much we can do about it, here we simply quit. """ def player_error(player, error): error_message(error.args[0], win) Gtk.main_quit """ PtPlayer's end-of-stream signal. Player is at the end and changes to paused state. Note that stream means any playable source like files, too. We set our buttons according to the state. """ def player_end_of_stream(player): button.set_active(False) """ The two main functions are Pt.Player.play() and Pt.Player.pause(). PtWaveviewer scrolls to cursor (follow-cursor) by default but if the user has scrolled manually follow-cursor is set to False. Here we assume that on play the user wants to follow cursor again. """ def button_toggled(button): if button.get_active(): viewer.set_property("follow-cursor", True) player.play() else: player.pause() """ In this timeout callback we update cursor position and time label. """ def update_cursor(): viewer.set_property("playback-cursor", player.get_position()) text = player.get_current_time_string(Pt.PrecisionType.SECOND_10TH) # Sometimes the position can't be retrieved and None is returned. if (text): label.set_text(text) # Continue updating return True """ PtWaveviewer's cursor-changed signal. This means the user clicked on the widget to change cursor position. We have to inform the PtPlayer. We set the follow-cursor property, too. """ def cursor_changed(viewer, position): player.jump_to_position(position) viewer.set_property("follow-cursor", True) """ Player's open async callback. Destroy progress dialog and get result. On success get wave data and pass it to the PtWaveviewer. Add a timeout of 10 ms to update cursor position and time label. """ def open_callback(player, result): progress.destroy() try: player.open_uri_finish(result) # Get data at a resolution of 100 px per second data = player.get_data(100) viewer.set_wave(data) GObject.timeout_add(10, update_cursor) except Exception as err: error_message(err.args[0], win) """ Pass PtPlayer's emitted progress signal to the PtProgressDialog. """ def progress_update_callback(player, value, dialog): dialog.set_progress(value) """ PtPlayer's async open function can be cancelled. This emits an error message for the open callback. """ def progress_response_callback(progress, response): if response == Gtk.ResponseType.CANCEL: player.cancel() if testfile == "file:///home/user/example.mp3": error_message("Please change 'file:///home/user/example.mp3' in source " "to an existing test file.", None) exit() # PtPlayer has a failable constructor, if GStreamer can't be initted. try: player = Pt.Player.new() except Exception as err: error_message(err.args[0], None) exit() player.connect("error", player_error) player.connect("end-of-stream", player_end_of_stream) # For the PtProgressDialog we have to use the async opening function player.open_uri_async(testfile, open_callback) # Now create the window with play button, PtWaveviewer and time label. win = Gtk.Window() win.set_border_width(12) win.set_default_size(500, 80) win.connect("delete-event", Gtk.main_quit) viewer = Pt.Waveviewer.new() viewer.connect("cursor-changed", cursor_changed) button = Gtk.ToggleButton.new_with_label("Play") button.connect("toggled", button_toggled) label = Gtk.Label("0:00.0") hbox = Gtk.Box(spacing=6) hbox.pack_start(button, False, False, 0) hbox.pack_start(viewer, True, True, 0) hbox.pack_start(label, False, False, 0) win.add(hbox) win.show_all() # PtProgressDialog, connect signals and show only, do not progress.run() progress = Pt.ProgressDialog.new(win) progress.connect("response", progress_response_callback) player.connect("load-progress", progress_update_callback, progress) progress.show_all() Gtk.main() parlatype-1.5.4/libparlatype/docs/reference/using_library.xml0000644000175000017500000000153213176574164021433 00000000000000 Using the library Programs using libparlatype written in C can be compiled with GCC using: gcc `pkg-config --cflags parlatype` -o example example.c `pkg-config --libs parlatype` There are bindings for other languages, e.g. in Python Parlatype can be imported like this: from gi.repository import Parlatype There is a glade catalog for PtWaveviewer so you can include it in your glade projects. parlatype-1.5.4/libparlatype/docs/reference/parlatype-overrides.txt0000644000175000017500000000000013036727535022564 00000000000000parlatype-1.5.4/libparlatype/docs/reference/parlatype-docs.xml0000644000175000017500000000361513176574164021515 00000000000000 ]> Parlatype Reference Manual for parlatype &version;. Gabor Karsay Overview Main backend: PtPlayer GtkWidgets Internals: Get Wavedata Object Hierarchy API Index parlatype-1.5.4/libparlatype/docs/reference/Makefile.am0000644000175000017500000001006713200427162020056 00000000000000## Process this file with automake to produce Makefile.in # We require automake 1.6 at least. AUTOMAKE_OPTIONS = 1.6 # This is a blank Makefile.am for using gtk-doc. # Copy this to your project's API docs directory and modify the variables to # suit your project. See the GTK+ Makefiles in gtk+/docs/reference for examples # of using the various options. # The name of the module, e.g. 'glib'. DOC_MODULE=parlatype # Uncomment for versioned docs and specify the version of the module, e.g. '2'. #DOC_MODULE_VERSION=2 # The top-level XML file (SGML in the past). You can change this if you want to. DOC_MAIN_SGML_FILE=$(DOC_MODULE)-docs.xml # Directories containing the source code. # gtk-doc will search all .c and .h files beneath these paths # for inline comments documenting functions and macros. # e.g. DOC_SOURCE_DIR=$(top_srcdir)/gtk $(top_srcdir)/gdk DOC_SOURCE_DIR=$(top_srcdir)/src # Extra options to pass to gtkdoc-scangobj. Not normally needed. SCANGOBJ_OPTIONS= # Extra options to supply to gtkdoc-scan. # e.g. SCAN_OPTIONS=--deprecated-guards="GTK_DISABLE_DEPRECATED" SCAN_OPTIONS=--source-dir=$(top_srcdir)/src --rebuild-types # Extra options to supply to gtkdoc-mkdb. # e.g. MKDB_OPTIONS=--xml-mode --output-format=xml MKDB_OPTIONS=--xml-mode --output-format=xml # Extra options to supply to gtkdoc-mktmpl # e.g. MKTMPL_OPTIONS=--only-section-tmpl MKTMPL_OPTIONS= # Extra options to supply to gtkdoc-mkhtml MKHTML_OPTIONS= # Extra options to supply to gtkdoc-fixref. Not normally needed. # e.g. FIXXREF_OPTIONS=--extra-dir=../gdk-pixbuf/html --extra-dir=../gdk/html FIXXREF_OPTIONS= # Used for dependencies. The docs will be rebuilt if any of these change. # e.g. HFILE_GLOB=$(top_srcdir)/gtk/*.h # e.g. CFILE_GLOB=$(top_srcdir)/gtk/*.c HFILE_GLOB=$(top_srcdir)/src/*.h CFILE_GLOB=$(top_srcdir)/src/*.c # Extra header to include when scanning, which are not under DOC_SOURCE_DIR # e.g. EXTRA_HFILES=$(top_srcdir}/contrib/extra.h EXTRA_HFILES= # Header files or dirs to ignore when scanning. Use base file/dir names # e.g. IGNORE_HFILES=gtkdebug.h gtkintl.h private_code IGNORE_HFILES=\ pt-waveviewer-cursor.h \ pt-waveviewer-focus.h \ pt-waveviewer-selection.h \ pt-waveviewer-ruler.h \ pt-waveviewer-waveform.h # Images to copy into HTML directory. # e.g. HTML_IMAGES=$(top_srcdir)/gtk/stock-icons/stock_about_24.png HTML_IMAGES=\ $(srcdir)/images/pt-progress-dialog.png \ $(srcdir)/images/pt-waveviewer.png # Extra SGML files that are included by $(DOC_MAIN_SGML_FILE). # e.g. content_files=running.sgml building.sgml changes-2.0.sgml content_files=\ version.xml.in \ gallery.xml \ introduction.xml \ using_library.xml \ python_example.xml \ parlatype-example.py # SGML files where gtk-doc abbrevations (#GtkWidget) are expanded # These files must be listed here *and* in content_files # e.g. expand_content_files=running.sgml expand_content_files= # CFLAGS and LDFLAGS for compiling gtkdoc-scangobj with your library. # Only needed if you are using gtkdoc-scangobj to dynamically query widget # signals and properties. # e.g. GTKDOC_CFLAGS=-I$(top_srcdir) -I$(top_builddir) $(GTK_DEBUG_FLAGS) # e.g. GTKDOC_LIBS=$(top_builddir)/gtk/$(gtktargetlib) GTKDOC_CFLAGS= \ -I$(top_srcdir)/src \ -I$(top_builddir) \ $(PACKAGE_CFLAGS) GTKDOC_LIBS= \ $(top_builddir)/src/libparlatype.la \ $(PACKAGE_LIBS) # This includes the standard gtk-doc make rules, copied by gtkdocize. include $(top_srcdir)/gtk-doc.make # Other files to distribute # e.g. EXTRA_DIST += version.xml.in EXTRA_DIST+=\ version.xml.in \ gallery.xml \ introduction.xml \ using_library.xml \ python_example.xml \ parlatype-example.py # Files not to distribute # for --rebuild-types in $(SCAN_OPTIONS), e.g. $(DOC_MODULE).types # for --rebuild-sections in $(SCAN_OPTIONS) e.g. $(DOC_MODULE)-sections.txt DISTCLEANFILES = $(DOC_MODULE).types # Comment this out if you want 'make check' to test you doc status # and run some sanity checks if ENABLE_GTK_DOC TESTS_ENVIRONMENT = \ DOC_MODULE=$(DOC_MODULE) DOC_MAIN_SGML_FILE=$(DOC_MAIN_SGML_FILE) \ SRCDIR=$(abs_srcdir) BUILDDIR=$(abs_builddir) TESTS = $(GTKDOC_CHECK) endif parlatype-1.5.4/libparlatype/docs/Makefile.in0000644000175000017500000005324113204324033016127 00000000000000# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = docs DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_code_coverage.m4 \ $(top_srcdir)/m4/ax_valgrind_check.m4 \ $(top_srcdir)/m4/glibtests.m4 $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ distdir am__extra_recursive_targets = check-valgrind-recursive \ check-valgrind-memcheck-recursive \ check-valgrind-helgrind-recursive check-valgrind-drd-recursive \ check-valgrind-sgcheck-recursive am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ CODE_COVERAGE_CPPFLAGS = @CODE_COVERAGE_CPPFLAGS@ CODE_COVERAGE_CXXFLAGS = @CODE_COVERAGE_CXXFLAGS@ CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ CODE_COVERAGE_LIBS = @CODE_COVERAGE_LIBS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_VALGRIND_drd = @ENABLE_VALGRIND_drd@ ENABLE_VALGRIND_helgrind = @ENABLE_VALGRIND_helgrind@ ENABLE_VALGRIND_memcheck = @ENABLE_VALGRIND_memcheck@ ENABLE_VALGRIND_sgcheck = @ENABLE_VALGRIND_sgcheck@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GCOV = @GCOV@ GENHTML = @GENHTML@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLADE_CATALOG_DIR = @GLADE_CATALOG_DIR@ GLADE_CFLAGS = @GLADE_CFLAGS@ GLADE_LIBS = @GLADE_LIBS@ GLADE_PIXMAP_DIR = @GLADE_PIXMAP_DIR@ GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ GSTREAMER_CFLAGS = @GSTREAMER_CFLAGS@ GSTREAMER_LIBS = @GSTREAMER_LIBS@ GTKDOC_CHECK = @GTKDOC_CHECK@ GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ GTKDOC_REBASE = @GTKDOC_REBASE@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ HTML_DIR = @HTML_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ LCOV = @LCOV@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PARLATYPE_API_VERSION = @PARLATYPE_API_VERSION@ PARLATYPE_SO_VERSION = @PARLATYPE_SO_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VALGRIND = @VALGRIND@ VALGRIND_ENABLED = @VALGRIND_ENABLED@ VERSION = @VERSION@ WARNINGCFLAGS = @WARNINGCFLAGS@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gsettingsschemadir = @gsettingsschemadir@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ installed_test_metadir = @installed_test_metadir@ installed_testdir = @installed_testdir@ intltool__v_merge_options_ = @intltool__v_merge_options_@ intltool__v_merge_options_0 = @intltool__v_merge_options_0@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ valgrind_enabled_tools = @valgrind_enabled_tools@ valgrind_tools = @valgrind_tools@ SUBDIRS = reference all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign docs/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" check-valgrind-local: check-valgrind-memcheck-local: check-valgrind-helgrind-local: check-valgrind-drd-local: check-valgrind-sgcheck-local: ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." check-valgrind: check-valgrind-recursive check-valgrind-am: check-valgrind-local check-valgrind-drd: check-valgrind-drd-recursive check-valgrind-drd-am: check-valgrind-drd-local check-valgrind-helgrind: check-valgrind-helgrind-recursive check-valgrind-helgrind-am: check-valgrind-helgrind-local check-valgrind-memcheck: check-valgrind-memcheck-recursive check-valgrind-memcheck-am: check-valgrind-memcheck-local check-valgrind-sgcheck: check-valgrind-sgcheck-recursive check-valgrind-sgcheck-am: check-valgrind-sgcheck-local clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(am__recursive_targets) install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ check-am check-valgrind-am check-valgrind-drd-am \ check-valgrind-drd-local check-valgrind-helgrind-am \ check-valgrind-helgrind-local check-valgrind-local \ check-valgrind-memcheck-am check-valgrind-memcheck-local \ check-valgrind-sgcheck-am check-valgrind-sgcheck-local clean \ clean-generic clean-libtool cscopelist-am ctags ctags-am \ distclean distclean-generic distclean-libtool distclean-tags \ distdir dvi dvi-am html html-am info info-am install \ install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am tags tags-am uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: parlatype-1.5.4/libparlatype/docs/Makefile.am0000644000175000017500000000002413171727132016117 00000000000000SUBDIRS = reference parlatype-1.5.4/libparlatype/gtk-doc.make0000644000175000017500000002226013167645026015336 00000000000000# -*- mode: makefile -*- #################################### # Everything below here is generic # #################################### if GTK_DOC_USE_LIBTOOL GTKDOC_CC = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) GTKDOC_LD = $(LIBTOOL) --tag=CC --mode=link $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) GTKDOC_RUN = $(LIBTOOL) --mode=execute else GTKDOC_CC = $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) GTKDOC_LD = $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) GTKDOC_RUN = endif # We set GPATH here; this gives us semantics for GNU make # which are more like other make's VPATH, when it comes to # whether a source that is a target of one rule is then # searched for in VPATH/GPATH. # GPATH = $(srcdir) TARGET_DIR=$(HTML_DIR)/$(DOC_MODULE) SETUP_FILES = \ $(content_files) \ $(DOC_MAIN_SGML_FILE) \ $(DOC_MODULE)-sections.txt \ $(DOC_MODULE)-overrides.txt EXTRA_DIST = \ $(HTML_IMAGES) \ $(SETUP_FILES) DOC_STAMPS=setup-build.stamp scan-build.stamp sgml-build.stamp \ html-build.stamp pdf-build.stamp \ sgml.stamp html.stamp pdf.stamp SCANOBJ_FILES = \ $(DOC_MODULE).args \ $(DOC_MODULE).hierarchy \ $(DOC_MODULE).interfaces \ $(DOC_MODULE).prerequisites \ $(DOC_MODULE).signals REPORT_FILES = \ $(DOC_MODULE)-undocumented.txt \ $(DOC_MODULE)-undeclared.txt \ $(DOC_MODULE)-unused.txt gtkdoc-check.test: Makefile $(AM_V_GEN)echo "#!/bin/sh -e" > $@; \ echo "$(GTKDOC_CHECK_PATH) || exit 1" >> $@; \ chmod +x $@ CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS) gtkdoc-check.test if GTK_DOC_BUILD_HTML HTML_BUILD_STAMP=html-build.stamp else HTML_BUILD_STAMP= endif if GTK_DOC_BUILD_PDF PDF_BUILD_STAMP=pdf-build.stamp else PDF_BUILD_STAMP= endif all-gtk-doc: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP) .PHONY: all-gtk-doc if ENABLE_GTK_DOC all-local: all-gtk-doc endif docs: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP) $(REPORT_FILES): sgml-build.stamp #### setup #### GTK_DOC_V_SETUP=$(GTK_DOC_V_SETUP_$(V)) GTK_DOC_V_SETUP_=$(GTK_DOC_V_SETUP_$(AM_DEFAULT_VERBOSITY)) GTK_DOC_V_SETUP_0=@echo " DOC Preparing build"; setup-build.stamp: -$(GTK_DOC_V_SETUP)if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \ files=`echo $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types`; \ if test "x$$files" != "x" ; then \ for file in $$files ; do \ destdir=`dirname $(abs_builddir)/$$file`; \ test -d "$$destdir" || mkdir -p "$$destdir"; \ test -f $(abs_srcdir)/$$file && \ cp -pf $(abs_srcdir)/$$file $(abs_builddir)/$$file || true; \ done; \ fi; \ fi $(AM_V_at)touch setup-build.stamp #### scan #### GTK_DOC_V_SCAN=$(GTK_DOC_V_SCAN_$(V)) GTK_DOC_V_SCAN_=$(GTK_DOC_V_SCAN_$(AM_DEFAULT_VERBOSITY)) GTK_DOC_V_SCAN_0=@echo " DOC Scanning header files"; GTK_DOC_V_INTROSPECT=$(GTK_DOC_V_INTROSPECT_$(V)) GTK_DOC_V_INTROSPECT_=$(GTK_DOC_V_INTROSPECT_$(AM_DEFAULT_VERBOSITY)) GTK_DOC_V_INTROSPECT_0=@echo " DOC Introspecting gobjects"; scan-build.stamp: setup-build.stamp $(HFILE_GLOB) $(CFILE_GLOB) $(GTK_DOC_V_SCAN)_source_dir='' ; \ for i in $(DOC_SOURCE_DIR) ; do \ _source_dir="$${_source_dir} --source-dir=$$i" ; \ done ; \ gtkdoc-scan --module=$(DOC_MODULE) --ignore-headers="$(IGNORE_HFILES)" $${_source_dir} $(SCAN_OPTIONS) $(EXTRA_HFILES) $(GTK_DOC_V_INTROSPECT)if grep -l '^..*$$' $(DOC_MODULE).types > /dev/null 2>&1 ; then \ scanobj_options=""; \ gtkdoc-scangobj 2>&1 --help | grep >/dev/null "\-\-verbose"; \ if test "$(?)" = "0"; then \ if test "x$(V)" = "x1"; then \ scanobj_options="--verbose"; \ fi; \ fi; \ CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" \ gtkdoc-scangobj $(SCANGOBJ_OPTIONS) $$scanobj_options --module=$(DOC_MODULE); \ else \ for i in $(SCANOBJ_FILES) ; do \ test -f $$i || touch $$i ; \ done \ fi $(AM_V_at)touch scan-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp @true #### xml #### GTK_DOC_V_XML=$(GTK_DOC_V_XML_$(V)) GTK_DOC_V_XML_=$(GTK_DOC_V_XML_$(AM_DEFAULT_VERBOSITY)) GTK_DOC_V_XML_0=@echo " DOC Building XML"; sgml-build.stamp: setup-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt $(expand_content_files) $(GTK_DOC_V_XML)_source_dir='' ; \ for i in $(DOC_SOURCE_DIR) ; do \ _source_dir="$${_source_dir} --source-dir=$$i" ; \ done ; \ gtkdoc-mkdb --module=$(DOC_MODULE) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $${_source_dir} $(MKDB_OPTIONS) $(AM_V_at)touch sgml-build.stamp sgml.stamp: sgml-build.stamp @true #### html #### GTK_DOC_V_HTML=$(GTK_DOC_V_HTML_$(V)) GTK_DOC_V_HTML_=$(GTK_DOC_V_HTML_$(AM_DEFAULT_VERBOSITY)) GTK_DOC_V_HTML_0=@echo " DOC Building HTML"; GTK_DOC_V_XREF=$(GTK_DOC_V_XREF_$(V)) GTK_DOC_V_XREF_=$(GTK_DOC_V_XREF_$(AM_DEFAULT_VERBOSITY)) GTK_DOC_V_XREF_0=@echo " DOC Fixing cross-references"; html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) $(GTK_DOC_V_HTML)rm -rf html && mkdir html && \ mkhtml_options=""; \ gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-verbose"; \ if test "$(?)" = "0"; then \ if test "x$(V)" = "x1"; then \ mkhtml_options="$$mkhtml_options --verbose"; \ fi; \ fi; \ gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-path"; \ if test "$(?)" = "0"; then \ mkhtml_options="$$mkhtml_options --path=\"$(abs_srcdir)\""; \ fi; \ cd html && gtkdoc-mkhtml $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE) -@test "x$(HTML_IMAGES)" = "x" || \ for file in $(HTML_IMAGES) ; do \ if test -f $(abs_srcdir)/$$file ; then \ cp $(abs_srcdir)/$$file $(abs_builddir)/html; \ fi; \ if test -f $(abs_builddir)/$$file ; then \ cp $(abs_builddir)/$$file $(abs_builddir)/html; \ fi; \ done; $(GTK_DOC_V_XREF)gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS) $(AM_V_at)touch html-build.stamp #### pdf #### GTK_DOC_V_PDF=$(GTK_DOC_V_PDF_$(V)) GTK_DOC_V_PDF_=$(GTK_DOC_V_PDF_$(AM_DEFAULT_VERBOSITY)) GTK_DOC_V_PDF_0=@echo " DOC Building PDF"; pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) $(GTK_DOC_V_PDF)rm -f $(DOC_MODULE).pdf && \ mkpdf_options=""; \ gtkdoc-mkpdf 2>&1 --help | grep >/dev/null "\-\-verbose"; \ if test "$(?)" = "0"; then \ if test "x$(V)" = "x1"; then \ mkpdf_options="$$mkpdf_options --verbose"; \ fi; \ fi; \ if test "x$(HTML_IMAGES)" != "x"; then \ for img in $(HTML_IMAGES); do \ part=`dirname $$img`; \ echo $$mkpdf_options | grep >/dev/null "\-\-imgdir=$$part "; \ if test $$? != 0; then \ mkpdf_options="$$mkpdf_options --imgdir=$$part"; \ fi; \ done; \ fi; \ gtkdoc-mkpdf --path="$(abs_srcdir)" $$mkpdf_options $(DOC_MODULE) $(DOC_MAIN_SGML_FILE) $(MKPDF_OPTIONS) $(AM_V_at)touch pdf-build.stamp ############## clean-local: @rm -f *~ *.bak @rm -rf .libs @if echo $(SCAN_OPTIONS) | grep -q "\-\-rebuild-types" ; then \ rm -f $(DOC_MODULE).types; \ fi distclean-local: @rm -rf xml html $(REPORT_FILES) $(DOC_MODULE).pdf \ $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt @if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \ rm -f $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types; \ fi maintainer-clean-local: @rm -rf xml html install-data-local: @installfiles=`echo $(builddir)/html/*`; \ if test "$$installfiles" = '$(builddir)/html/*'; \ then echo 1>&2 'Nothing to install' ; \ else \ if test -n "$(DOC_MODULE_VERSION)"; then \ installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \ else \ installdir="$(DESTDIR)$(TARGET_DIR)"; \ fi; \ $(mkinstalldirs) $${installdir} ; \ for i in $$installfiles; do \ echo ' $(INSTALL_DATA) '$$i ; \ $(INSTALL_DATA) $$i $${installdir}; \ done; \ if test -n "$(DOC_MODULE_VERSION)"; then \ mv -f $${installdir}/$(DOC_MODULE).devhelp2 \ $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp2; \ fi; \ $(GTKDOC_REBASE) --relative --dest-dir=$(DESTDIR) --html-dir=$${installdir}; \ fi uninstall-local: @if test -n "$(DOC_MODULE_VERSION)"; then \ installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \ else \ installdir="$(DESTDIR)$(TARGET_DIR)"; \ fi; \ rm -rf $${installdir} # # Require gtk-doc when making dist # if HAVE_GTK_DOC dist-check-gtkdoc: docs else dist-check-gtkdoc: @echo "*** gtk-doc is needed to run 'make dist'. ***" @echo "*** gtk-doc was not found when 'configure' ran. ***" @echo "*** please install gtk-doc and rerun 'configure'. ***" @false endif dist-hook: dist-check-gtkdoc all-gtk-doc dist-hook-local @mkdir $(distdir)/html @cp ./html/* $(distdir)/html @-cp ./$(DOC_MODULE).pdf $(distdir)/ @-cp ./$(DOC_MODULE).types $(distdir)/ @-cp ./$(DOC_MODULE)-sections.txt $(distdir)/ @cd $(distdir) && rm -f $(DISTCLEANFILES) @$(GTKDOC_REBASE) --online --relative --html-dir=$(distdir)/html .PHONY : dist-hook-local docs parlatype-1.5.4/libparlatype/ltmain.sh0000644000175000017500000105203013167645057014772 00000000000000 # libtool (GNU libtool) 2.4.2 # Written by Gordon Matzigkeit , 1996 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, # 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, # or obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # Usage: $progname [OPTION]... [MODE-ARG]... # # Provide generalized library-building support services. # # --config show all configuration variables # --debug enable verbose shell tracing # -n, --dry-run display commands without modifying any files # --features display basic configuration information and exit # --mode=MODE use operation mode MODE # --preserve-dup-deps don't remove duplicate dependency libraries # --quiet, --silent don't print informational messages # --no-quiet, --no-silent # print informational messages (default) # --no-warn don't display warning messages # --tag=TAG use configuration variables from tag TAG # -v, --verbose print more informational messages than default # --no-verbose don't print the extra informational messages # --version print version information # -h, --help, --help-all print short, long, or detailed help message # # MODE must be one of the following: # # clean remove files from the build directory # compile compile a source file into a libtool object # execute automatically set library path, then run a program # finish complete the installation of libtool libraries # install install libraries or executables # link create a library or an executable # uninstall remove libraries from an installed directory # # MODE-ARGS vary depending on the MODE. When passed as first option, # `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. # Try `$progname --help --mode=MODE' for a more detailed description of MODE. # # When reporting a bug, please describe a test case to reproduce it and # include the following information: # # host-triplet: $host # shell: $SHELL # compiler: $LTCC # compiler flags: $LTCFLAGS # linker: $LD (gnu? $with_gnu_ld) # $progname: (GNU libtool) 2.4.2 Debian-2.4.2-1.11 # automake: $automake_version # autoconf: $autoconf_version # # Report bugs to . # GNU libtool home page: . # General help using GNU software: . PROGRAM=libtool PACKAGE=libtool VERSION="2.4.2 Debian-2.4.2-1.11" TIMESTAMP="" package_revision=1.3337 # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } # NLS nuisances: We save the old values to restore during execute mode. lt_user_locale= lt_safe_locale= for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${$lt_var+set}\" = set; then save_$lt_var=\$$lt_var $lt_var=C export $lt_var lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" fi" done LC_ALL=C LANGUAGE=C export LANGUAGE LC_ALL $lt_unset CDPATH # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh # is ksh but when the shell is invoked as "sh" and the current value of # the _XPG environment variable is not equal to 1 (one), the special # positional parameter $0, within a function call, is the name of the # function. progpath="$0" : ${CP="cp -f"} test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} : ${MAKE="make"} : ${MKDIR="mkdir"} : ${MV="mv -f"} : ${RM="rm -f"} : ${SHELL="${CONFIG_SHELL-/bin/sh}"} : ${Xsed="$SED -e 1s/^X//"} # Global variables: EXIT_SUCCESS=0 EXIT_FAILURE=1 EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. exit_status=$EXIT_SUCCESS # Make sure IFS has a sensible default lt_nl=' ' IFS=" $lt_nl" dirname="s,/[^/]*$,," basename="s,^.*/,," # func_dirname file append nondir_replacement # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. func_dirname () { func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi } # func_dirname may be replaced by extended shell implementation # func_basename file func_basename () { func_basename_result=`$ECHO "${1}" | $SED "$basename"` } # func_basename may be replaced by extended shell implementation # func_dirname_and_basename file append nondir_replacement # perform func_basename and func_dirname in a single function # call: # dirname: Compute the dirname of FILE. If nonempty, # add APPEND to the result, otherwise set result # to NONDIR_REPLACEMENT. # value returned in "$func_dirname_result" # basename: Compute filename of FILE. # value retuned in "$func_basename_result" # Implementation must be kept synchronized with func_dirname # and func_basename. For efficiency, we do not delegate to # those functions but instead duplicate the functionality here. func_dirname_and_basename () { # Extract subdirectory from the argument. func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` } # func_dirname_and_basename may be replaced by extended shell implementation # func_stripname prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # func_strip_suffix prefix name func_stripname () { case ${2} in .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; esac } # func_stripname may be replaced by extended shell implementation # These SED scripts presuppose an absolute path with a trailing slash. pathcar='s,^/\([^/]*\).*$,\1,' pathcdr='s,^/[^/]*,,' removedotparts=':dotsl s@/\./@/@g t dotsl s,/\.$,/,' collapseslashes='s@/\{1,\}@/@g' finalslash='s,/*$,/,' # func_normal_abspath PATH # Remove doubled-up and trailing slashes, "." path components, # and cancel out any ".." path components in PATH after making # it an absolute path. # value returned in "$func_normal_abspath_result" func_normal_abspath () { # Start from root dir and reassemble the path. func_normal_abspath_result= func_normal_abspath_tpath=$1 func_normal_abspath_altnamespace= case $func_normal_abspath_tpath in "") # Empty path, that just means $cwd. func_stripname '' '/' "`pwd`" func_normal_abspath_result=$func_stripname_result return ;; # The next three entries are used to spot a run of precisely # two leading slashes without using negated character classes; # we take advantage of case's first-match behaviour. ///*) # Unusual form of absolute path, do nothing. ;; //*) # Not necessarily an ordinary path; POSIX reserves leading '//' # and for example Cygwin uses it to access remote file shares # over CIFS/SMB, so we conserve a leading double slash if found. func_normal_abspath_altnamespace=/ ;; /*) # Absolute path, do nothing. ;; *) # Relative path, prepend $cwd. func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath ;; esac # Cancel out all the simple stuff to save iterations. We also want # the path to end with a slash for ease of parsing, so make sure # there is one (and only one) here. func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` while :; do # Processed it all yet? if test "$func_normal_abspath_tpath" = / ; then # If we ascended to the root using ".." the result may be empty now. if test -z "$func_normal_abspath_result" ; then func_normal_abspath_result=/ fi break fi func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$pathcar"` func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$pathcdr"` # Figure out what to do with it case $func_normal_abspath_tcomponent in "") # Trailing empty path component, ignore it. ;; ..) # Parent dir; strip last assembled component from result. func_dirname "$func_normal_abspath_result" func_normal_abspath_result=$func_dirname_result ;; *) # Actual path component, append it. func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent ;; esac done # Restore leading double-slash if one was found on entry. func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result } # func_relative_path SRCDIR DSTDIR # generates a relative path from SRCDIR to DSTDIR, with a trailing # slash if non-empty, suitable for immediately appending a filename # without needing to append a separator. # value returned in "$func_relative_path_result" func_relative_path () { func_relative_path_result= func_normal_abspath "$1" func_relative_path_tlibdir=$func_normal_abspath_result func_normal_abspath "$2" func_relative_path_tbindir=$func_normal_abspath_result # Ascend the tree starting from libdir while :; do # check if we have found a prefix of bindir case $func_relative_path_tbindir in $func_relative_path_tlibdir) # found an exact match func_relative_path_tcancelled= break ;; $func_relative_path_tlibdir*) # found a matching prefix func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" func_relative_path_tcancelled=$func_stripname_result if test -z "$func_relative_path_result"; then func_relative_path_result=. fi break ;; *) func_dirname $func_relative_path_tlibdir func_relative_path_tlibdir=${func_dirname_result} if test "x$func_relative_path_tlibdir" = x ; then # Have to descend all the way to the root! func_relative_path_result=../$func_relative_path_result func_relative_path_tcancelled=$func_relative_path_tbindir break fi func_relative_path_result=../$func_relative_path_result ;; esac done # Now calculate path; take care to avoid doubling-up slashes. func_stripname '' '/' "$func_relative_path_result" func_relative_path_result=$func_stripname_result func_stripname '/' '/' "$func_relative_path_tcancelled" if test "x$func_stripname_result" != x ; then func_relative_path_result=${func_relative_path_result}/${func_stripname_result} fi # Normalisation. If bindir is libdir, return empty string, # else relative path ending with a slash; either way, target # file name can be directly appended. if test ! -z "$func_relative_path_result"; then func_stripname './' '' "$func_relative_path_result/" func_relative_path_result=$func_stripname_result fi } # The name of this program: func_dirname_and_basename "$progpath" progname=$func_basename_result # Make sure we have an absolute path for reexecution: case $progpath in [\\/]*|[A-Za-z]:\\*) ;; *[\\/]*) progdir=$func_dirname_result progdir=`cd "$progdir" && pwd` progpath="$progdir/$progname" ;; *) save_IFS="$IFS" IFS=${PATH_SEPARATOR-:} for progdir in $PATH; do IFS="$save_IFS" test -x "$progdir/$progname" && break done IFS="$save_IFS" test -n "$progdir" || progdir=`pwd` progpath="$progdir/$progname" ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed="${SED}"' -e 1s/^X//' sed_quote_subst='s/\([`"$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution that turns a string into a regex matching for the # string literally. sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' # Sed substitution that converts a w32 file name or path # which contains forward slashes, into one that contains # (escaped) backslashes. A very naive implementation. lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' # Re-`\' parameter expansions in output of double_quote_subst that were # `\'-ed in input to the same. If an odd number of `\' preceded a '$' # in input to double_quote_subst, that '$' was protected from expansion. # Since each input `\' is now two `\'s, look for any number of runs of # four `\'s followed by two `\'s and then a '$'. `\' that '$'. bs='\\' bs2='\\\\' bs4='\\\\\\\\' dollar='\$' sed_double_backslash="\ s/$bs4/&\\ /g s/^$bs2$dollar/$bs&/ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g s/\n//g" # Standard options: opt_dry_run=false opt_help=false opt_quiet=false opt_verbose=false opt_warning=: # func_echo arg... # Echo program name prefixed message, along with the current mode # name if it has been set yet. func_echo () { $ECHO "$progname: ${opt_mode+$opt_mode: }$*" } # func_verbose arg... # Echo program name prefixed message in verbose mode only. func_verbose () { $opt_verbose && func_echo ${1+"$@"} # A bug in bash halts the script if the last line of a function # fails when set -e is in force, so we need another command to # work around that: : } # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "$*" } # func_error arg... # Echo program name prefixed message to standard error. func_error () { $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 } # func_warning arg... # Echo program name prefixed warning message to standard error. func_warning () { $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 # bash bug again: : } # func_fatal_error arg... # Echo program name prefixed message to standard error, and exit. func_fatal_error () { func_error ${1+"$@"} exit $EXIT_FAILURE } # func_fatal_help arg... # Echo program name prefixed message to standard error, followed by # a help hint, and exit. func_fatal_help () { func_error ${1+"$@"} func_fatal_error "$help" } help="Try \`$progname --help' for more information." ## default # func_grep expression filename # Check whether EXPRESSION matches any line of FILENAME, without output. func_grep () { $GREP "$1" "$2" >/dev/null 2>&1 } # func_mkdir_p directory-path # Make sure the entire path to DIRECTORY-PATH is available. func_mkdir_p () { my_directory_path="$1" my_dir_list= if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then # Protect directory names starting with `-' case $my_directory_path in -*) my_directory_path="./$my_directory_path" ;; esac # While some portion of DIR does not yet exist... while test ! -d "$my_directory_path"; do # ...make a list in topmost first order. Use a colon delimited # list incase some portion of path contains whitespace. my_dir_list="$my_directory_path:$my_dir_list" # If the last portion added has no slash in it, the list is done case $my_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` done my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` save_mkdir_p_IFS="$IFS"; IFS=':' for my_dir in $my_dir_list; do IFS="$save_mkdir_p_IFS" # mkdir can fail with a `File exist' error if two processes # try to create one of the directories concurrently. Don't # stop in that case! $MKDIR "$my_dir" 2>/dev/null || : done IFS="$save_mkdir_p_IFS" # Bail out if we (or some other process) failed to create a directory. test -d "$my_directory_path" || \ func_fatal_error "Failed to create \`$1'" fi } # func_mktempdir [string] # Make a temporary directory that won't clash with other running # libtool processes, and avoids race conditions if possible. If # given, STRING is the basename for that directory. func_mktempdir () { my_template="${TMPDIR-/tmp}/${1-$progname}" if test "$opt_dry_run" = ":"; then # Return a directory name, but don't create it in dry-run mode my_tmpdir="${my_template}-$$" else # If mktemp works, use that first and foremost my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` if test ! -d "$my_tmpdir"; then # Failing that, at least try and use $RANDOM to avoid a race my_tmpdir="${my_template}-${RANDOM-0}$$" save_mktempdir_umask=`umask` umask 0077 $MKDIR "$my_tmpdir" umask $save_mktempdir_umask fi # If we're not in dry-run mode, bomb out on failure test -d "$my_tmpdir" || \ func_fatal_error "cannot create temporary directory \`$my_tmpdir'" fi $ECHO "$my_tmpdir" } # func_quote_for_eval arg # Aesthetically quote ARG to be evaled later. # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT # is double-quoted, suitable for a subsequent eval, whereas # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters # which are still active within double quotes backslashified. func_quote_for_eval () { case $1 in *[\\\`\"\$]*) func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; *) func_quote_for_eval_unquoted_result="$1" ;; esac case $func_quote_for_eval_unquoted_result in # Double-quote args containing shell metacharacters to delay # word splitting, command substitution and and variable # expansion for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" ;; *) func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" esac } # func_quote_for_expand arg # Aesthetically quote ARG to be evaled later; same as above, # but do not quote variable references. func_quote_for_expand () { case $1 in *[\\\`\"]*) my_arg=`$ECHO "$1" | $SED \ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; *) my_arg="$1" ;; esac case $my_arg in # Double-quote args containing shell metacharacters to delay # word splitting and command substitution for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") my_arg="\"$my_arg\"" ;; esac func_quote_for_expand_result="$my_arg" } # func_show_eval cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. func_show_eval () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$my_cmd" my_status=$? if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_show_eval_locale cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. Use the saved locale for evaluation. func_show_eval_locale () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$lt_user_locale $my_cmd" my_status=$? eval "$lt_safe_locale" if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_tr_sh # Turn $1 into a string suitable for a shell variable name. # Result is stored in $func_tr_sh_result. All characters # not in the set a-zA-Z0-9_ are replaced with '_'. Further, # if $1 begins with a digit, a '_' is prepended as well. func_tr_sh () { case $1 in [0-9]* | *[!a-zA-Z0-9_]*) func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` ;; * ) func_tr_sh_result=$1 ;; esac } # func_version # Echo version message to standard output and exit. func_version () { $opt_debug $SED -n '/(C)/!b go :more /\./!{ N s/\n# / / b more } :go /^# '$PROGRAM' (GNU /,/# warranty; / { s/^# // s/^# *$// s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ p }' < "$progpath" exit $? } # func_usage # Echo short help message to standard output and exit. func_usage () { $opt_debug $SED -n '/^# Usage:/,/^# *.*--help/ { s/^# // s/^# *$// s/\$progname/'$progname'/ p }' < "$progpath" echo $ECHO "run \`$progname --help | more' for full usage" exit $? } # func_help [NOEXIT] # Echo long help message to standard output and exit, # unless 'noexit' is passed as argument. func_help () { $opt_debug $SED -n '/^# Usage:/,/# Report bugs to/ { :print s/^# // s/^# *$// s*\$progname*'$progname'* s*\$host*'"$host"'* s*\$SHELL*'"$SHELL"'* s*\$LTCC*'"$LTCC"'* s*\$LTCFLAGS*'"$LTCFLAGS"'* s*\$LD*'"$LD"'* s/\$with_gnu_ld/'"$with_gnu_ld"'/ s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ p d } /^# .* home page:/b print /^# General help using/b print ' < "$progpath" ret=$? if test -z "$1"; then exit $ret fi } # func_missing_arg argname # Echo program name prefixed message to standard error and set global # exit_cmd. func_missing_arg () { $opt_debug func_error "missing argument for $1." exit_cmd=exit } # func_split_short_opt shortopt # Set func_split_short_opt_name and func_split_short_opt_arg shell # variables after splitting SHORTOPT after the 2nd character. func_split_short_opt () { my_sed_short_opt='1s/^\(..\).*$/\1/;q' my_sed_short_rest='1s/^..\(.*\)$/\1/;q' func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` } # func_split_short_opt may be replaced by extended shell implementation # func_split_long_opt longopt # Set func_split_long_opt_name and func_split_long_opt_arg shell # variables after splitting LONGOPT at the `=' sign. func_split_long_opt () { my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' my_sed_long_arg='1s/^--[^=]*=//' func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` } # func_split_long_opt may be replaced by extended shell implementation exit_cmd=: magic="%%%MAGIC variable%%%" magic_exe="%%%MAGIC EXE variable%%%" # Global variables. nonopt= preserve_args= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" extracted_archives= extracted_serial=0 # If this variable is set in any of the actions, the command in it # will be execed at the end. This prevents here-documents from being # left over by shells. exec_cmd= # func_append var value # Append VALUE to the end of shell variable VAR. func_append () { eval "${1}=\$${1}\${2}" } # func_append may be replaced by extended shell implementation # func_append_quoted var value # Quote VALUE and append to the end of shell variable VAR, separated # by a space. func_append_quoted () { func_quote_for_eval "${2}" eval "${1}=\$${1}\\ \$func_quote_for_eval_result" } # func_append_quoted may be replaced by extended shell implementation # func_arith arithmetic-term... func_arith () { func_arith_result=`expr "${@}"` } # func_arith may be replaced by extended shell implementation # func_len string # STRING may not start with a hyphen. func_len () { func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` } # func_len may be replaced by extended shell implementation # func_lo2o object func_lo2o () { func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` } # func_lo2o may be replaced by extended shell implementation # func_xform libobj-or-source func_xform () { func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` } # func_xform may be replaced by extended shell implementation # func_fatal_configuration arg... # Echo program name prefixed message to standard error, followed by # a configuration failure hint, and exit. func_fatal_configuration () { func_error ${1+"$@"} func_error "See the $PACKAGE documentation for more information." func_fatal_error "Fatal configuration error." } # func_config # Display the configuration for all the tags in this script. func_config () { re_begincf='^# ### BEGIN LIBTOOL' re_endcf='^# ### END LIBTOOL' # Default configuration. $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" # Now print the configurations for the tags. for tagname in $taglist; do $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" done exit $? } # func_features # Display the features supported by this script. func_features () { echo "host: $host" if test "$build_libtool_libs" = yes; then echo "enable shared libraries" else echo "disable shared libraries" fi if test "$build_old_libs" = yes; then echo "enable static libraries" else echo "disable static libraries" fi exit $? } # func_enable_tag tagname # Verify that TAGNAME is valid, and either flag an error and exit, or # enable the TAGNAME tag. We also add TAGNAME to the global $taglist # variable here. func_enable_tag () { # Global variable: tagname="$1" re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" sed_extractcf="/$re_begincf/,/$re_endcf/p" # Validate tagname. case $tagname in *[!-_A-Za-z0-9,/]*) func_fatal_error "invalid tag name: $tagname" ;; esac # Don't test for the "default" C tag, as we know it's # there but not specially marked. case $tagname in CC) ;; *) if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then taglist="$taglist $tagname" # Evaluate the configuration. Be careful to quote the path # and the sed script, to avoid splitting on whitespace, but # also don't use non-portable quotes within backquotes within # quotes we have to do it in 2 steps: extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` eval "$extractedcf" else func_error "ignoring unknown tag $tagname" fi ;; esac } # func_check_version_match # Ensure that we are using m4 macros, and libtool script from the same # release of libtool. func_check_version_match () { if test "$package_revision" != "$macro_revision"; then if test "$VERSION" != "$macro_version"; then if test -z "$macro_version"; then cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from an older release. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from $PACKAGE $macro_version. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF fi else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, $progname: but the definition of this LT_INIT comes from revision $macro_revision. $progname: You should recreate aclocal.m4 with macros from revision $package_revision $progname: of $PACKAGE $VERSION and run autoconf again. _LT_EOF fi exit $EXIT_MISMATCH fi } # Shorthand for --mode=foo, only valid as the first argument case $1 in clean|clea|cle|cl) shift; set dummy --mode clean ${1+"$@"}; shift ;; compile|compil|compi|comp|com|co|c) shift; set dummy --mode compile ${1+"$@"}; shift ;; execute|execut|execu|exec|exe|ex|e) shift; set dummy --mode execute ${1+"$@"}; shift ;; finish|finis|fini|fin|fi|f) shift; set dummy --mode finish ${1+"$@"}; shift ;; install|instal|insta|inst|ins|in|i) shift; set dummy --mode install ${1+"$@"}; shift ;; link|lin|li|l) shift; set dummy --mode link ${1+"$@"}; shift ;; uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) shift; set dummy --mode uninstall ${1+"$@"}; shift ;; esac # Option defaults: opt_debug=: opt_dry_run=false opt_config=false opt_preserve_dup_deps=false opt_features=false opt_finish=false opt_help=false opt_help_all=false opt_silent=: opt_warning=: opt_verbose=: opt_silent=false opt_verbose=false # Parse options once, thoroughly. This comes as soon as possible in the # script to make things like `--version' happen as quickly as we can. { # this just eases exit handling while test $# -gt 0; do opt="$1" shift case $opt in --debug|-x) opt_debug='set -x' func_echo "enabling shell trace mode" $opt_debug ;; --dry-run|--dryrun|-n) opt_dry_run=: ;; --config) opt_config=: func_config ;; --dlopen|-dlopen) optarg="$1" opt_dlopen="${opt_dlopen+$opt_dlopen }$optarg" shift ;; --preserve-dup-deps) opt_preserve_dup_deps=: ;; --features) opt_features=: func_features ;; --finish) opt_finish=: set dummy --mode finish ${1+"$@"}; shift ;; --help) opt_help=: ;; --help-all) opt_help_all=: opt_help=': help-all' ;; --mode) test $# = 0 && func_missing_arg $opt && break optarg="$1" opt_mode="$optarg" case $optarg in # Valid mode arguments: clean|compile|execute|finish|install|link|relink|uninstall) ;; # Catch anything else as an error *) func_error "invalid argument for $opt" exit_cmd=exit break ;; esac shift ;; --no-silent|--no-quiet) opt_silent=false func_append preserve_args " $opt" ;; --no-warning|--no-warn) opt_warning=false func_append preserve_args " $opt" ;; --no-verbose) opt_verbose=false func_append preserve_args " $opt" ;; --silent|--quiet) opt_silent=: func_append preserve_args " $opt" opt_verbose=false ;; --verbose|-v) opt_verbose=: func_append preserve_args " $opt" opt_silent=false ;; --tag) test $# = 0 && func_missing_arg $opt && break optarg="$1" opt_tag="$optarg" func_append preserve_args " $opt $optarg" func_enable_tag "$optarg" shift ;; -\?|-h) func_usage ;; --help) func_help ;; --version) func_version ;; # Separate optargs to long options: --*=*) func_split_long_opt "$opt" set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} shift ;; # Separate non-argument short options: -\?*|-h*|-n*|-v*) func_split_short_opt "$opt" set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} shift ;; --) break ;; -*) func_fatal_help "unrecognized option \`$opt'" ;; *) set dummy "$opt" ${1+"$@"}; shift; break ;; esac done # Validate options: # save first non-option argument if test "$#" -gt 0; then nonopt="$opt" shift fi # preserve --debug test "$opt_debug" = : || func_append preserve_args " --debug" case $host in *cygwin* | *mingw* | *pw32* | *cegcc*) # don't eliminate duplications in $postdeps and $predeps opt_duplicate_compiler_generated_deps=: ;; *) opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps ;; esac $opt_help || { # Sanity checks first: func_check_version_match if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then func_fatal_configuration "not configured to build any kind of library" fi # Darwin sucks eval std_shrext=\"$shrext_cmds\" # Only execute mode is allowed to have -dlopen flags. if test -n "$opt_dlopen" && test "$opt_mode" != execute; then func_error "unrecognized option \`-dlopen'" $ECHO "$help" 1>&2 exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. generic_help="$help" help="Try \`$progname --help --mode=$opt_mode' for more information." } # Bail if the options were screwed $exit_cmd $EXIT_FAILURE } ## ----------- ## ## Main. ## ## ----------- ## # func_lalib_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_lalib_p () { test -f "$1" && $SED -e 4q "$1" 2>/dev/null \ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 } # func_lalib_unsafe_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function implements the same check as func_lalib_p without # resorting to external programs. To this end, it redirects stdin and # closes it afterwards, without saving the original file descriptor. # As a safety measure, use it only where a negative result would be # fatal anyway. Works if `file' does not exist. func_lalib_unsafe_p () { lalib_p=no if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then for lalib_p_l in 1 2 3 4 do read lalib_p_line case "$lalib_p_line" in \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; esac done exec 0<&5 5<&- fi test "$lalib_p" = yes } # func_ltwrapper_script_p file # True iff FILE is a libtool wrapper script # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_script_p () { func_lalib_p "$1" } # func_ltwrapper_executable_p file # True iff FILE is a libtool wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_executable_p () { func_ltwrapper_exec_suffix= case $1 in *.exe) ;; *) func_ltwrapper_exec_suffix=.exe ;; esac $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 } # func_ltwrapper_scriptname file # Assumes file is an ltwrapper_executable # uses $file to determine the appropriate filename for a # temporary ltwrapper_script. func_ltwrapper_scriptname () { func_dirname_and_basename "$1" "" "." func_stripname '' '.exe' "$func_basename_result" func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" } # func_ltwrapper_p file # True iff FILE is a libtool wrapper script or wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_p () { func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" } # func_execute_cmds commands fail_cmd # Execute tilde-delimited COMMANDS. # If FAIL_CMD is given, eval that upon failure. # FAIL_CMD may read-access the current command in variable CMD! func_execute_cmds () { $opt_debug save_ifs=$IFS; IFS='~' for cmd in $1; do IFS=$save_ifs eval cmd=\"$cmd\" func_show_eval "$cmd" "${2-:}" done IFS=$save_ifs } # func_source file # Source FILE, adding directory component if necessary. # Note that it is not necessary on cygwin/mingw to append a dot to # FILE even if both FILE and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing # `FILE.' does not work on cygwin managed mounts. func_source () { $opt_debug case $1 in */* | *\\*) . "$1" ;; *) . "./$1" ;; esac } # func_resolve_sysroot PATH # Replace a leading = in PATH with a sysroot. Store the result into # func_resolve_sysroot_result func_resolve_sysroot () { func_resolve_sysroot_result=$1 case $func_resolve_sysroot_result in =*) func_stripname '=' '' "$func_resolve_sysroot_result" func_resolve_sysroot_result=$lt_sysroot$func_stripname_result ;; esac } # func_replace_sysroot PATH # If PATH begins with the sysroot, replace it with = and # store the result into func_replace_sysroot_result. func_replace_sysroot () { case "$lt_sysroot:$1" in ?*:"$lt_sysroot"*) func_stripname "$lt_sysroot" '' "$1" func_replace_sysroot_result="=$func_stripname_result" ;; *) # Including no sysroot. func_replace_sysroot_result=$1 ;; esac } # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. # Only attempt this if the compiler in the base compile # command doesn't match the default compiler. # arg is usually of the form 'gcc ...' func_infer_tag () { $opt_debug if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) for z in $available_tags; do if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case "$@ " in " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. tagname=$z break ;; esac fi done # If $tagname still isn't set, then no tagged configuration # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then func_echo "unable to infer tagged configuration" func_fatal_error "specify a tag with \`--tag'" # else # func_verbose "using $tagname tagged configuration" fi ;; esac fi } # func_write_libtool_object output_name pic_name nonpic_name # Create a libtool object file (analogous to a ".la" file), # but don't create it if we're doing a dry run. func_write_libtool_object () { write_libobj=${1} if test "$build_libtool_libs" = yes; then write_lobj=\'${2}\' else write_lobj=none fi if test "$build_old_libs" = yes; then write_oldobj=\'${3}\' else write_oldobj=none fi $opt_dry_run || { cat >${write_libobj}T </dev/null` if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | $SED -e "$lt_sed_naive_backslashify"` else func_convert_core_file_wine_to_w32_result= fi fi } # end: func_convert_core_file_wine_to_w32 # func_convert_core_path_wine_to_w32 ARG # Helper function used by path conversion functions when $build is *nix, and # $host is mingw, cygwin, or some other w32 environment. Relies on a correctly # configured wine environment available, with the winepath program in $build's # $PATH. Assumes ARG has no leading or trailing path separator characters. # # ARG is path to be converted from $build format to win32. # Result is available in $func_convert_core_path_wine_to_w32_result. # Unconvertible file (directory) names in ARG are skipped; if no directory names # are convertible, then the result may be empty. func_convert_core_path_wine_to_w32 () { $opt_debug # unfortunately, winepath doesn't convert paths, only file names func_convert_core_path_wine_to_w32_result="" if test -n "$1"; then oldIFS=$IFS IFS=: for func_convert_core_path_wine_to_w32_f in $1; do IFS=$oldIFS func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" if test -n "$func_convert_core_file_wine_to_w32_result" ; then if test -z "$func_convert_core_path_wine_to_w32_result"; then func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" else func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" fi fi done IFS=$oldIFS fi } # end: func_convert_core_path_wine_to_w32 # func_cygpath ARGS... # Wrapper around calling the cygpath program via LT_CYGPATH. This is used when # when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) # $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or # (2), returns the Cygwin file name or path in func_cygpath_result (input # file name or path is assumed to be in w32 format, as previously converted # from $build's *nix or MSYS format). In case (3), returns the w32 file name # or path in func_cygpath_result (input file name or path is assumed to be in # Cygwin format). Returns an empty string on error. # # ARGS are passed to cygpath, with the last one being the file name or path to # be converted. # # Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH # environment variable; do not put it in $PATH. func_cygpath () { $opt_debug if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` if test "$?" -ne 0; then # on failure, ensure result is empty func_cygpath_result= fi else func_cygpath_result= func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" fi } #end: func_cygpath # func_convert_core_msys_to_w32 ARG # Convert file name or path ARG from MSYS format to w32 format. Return # result in func_convert_core_msys_to_w32_result. func_convert_core_msys_to_w32 () { $opt_debug # awkward: cmd appends spaces to result func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` } #end: func_convert_core_msys_to_w32 # func_convert_file_check ARG1 ARG2 # Verify that ARG1 (a file name in $build format) was converted to $host # format in ARG2. Otherwise, emit an error message, but continue (resetting # func_to_host_file_result to ARG1). func_convert_file_check () { $opt_debug if test -z "$2" && test -n "$1" ; then func_error "Could not determine host file name corresponding to" func_error " \`$1'" func_error "Continuing, but uninstalled executables may not work." # Fallback: func_to_host_file_result="$1" fi } # end func_convert_file_check # func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH # Verify that FROM_PATH (a path in $build format) was converted to $host # format in TO_PATH. Otherwise, emit an error message, but continue, resetting # func_to_host_file_result to a simplistic fallback value (see below). func_convert_path_check () { $opt_debug if test -z "$4" && test -n "$3"; then func_error "Could not determine the host path corresponding to" func_error " \`$3'" func_error "Continuing, but uninstalled executables may not work." # Fallback. This is a deliberately simplistic "conversion" and # should not be "improved". See libtool.info. if test "x$1" != "x$2"; then lt_replace_pathsep_chars="s|$1|$2|g" func_to_host_path_result=`echo "$3" | $SED -e "$lt_replace_pathsep_chars"` else func_to_host_path_result="$3" fi fi } # end func_convert_path_check # func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG # Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT # and appending REPL if ORIG matches BACKPAT. func_convert_path_front_back_pathsep () { $opt_debug case $4 in $1 ) func_to_host_path_result="$3$func_to_host_path_result" ;; esac case $4 in $2 ) func_append func_to_host_path_result "$3" ;; esac } # end func_convert_path_front_back_pathsep ################################################## # $build to $host FILE NAME CONVERSION FUNCTIONS # ################################################## # invoked via `$to_host_file_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # Result will be available in $func_to_host_file_result. # func_to_host_file ARG # Converts the file name ARG from $build format to $host format. Return result # in func_to_host_file_result. func_to_host_file () { $opt_debug $to_host_file_cmd "$1" } # end func_to_host_file # func_to_tool_file ARG LAZY # converts the file name ARG from $build format to toolchain format. Return # result in func_to_tool_file_result. If the conversion in use is listed # in (the comma separated) LAZY, no conversion takes place. func_to_tool_file () { $opt_debug case ,$2, in *,"$to_tool_file_cmd",*) func_to_tool_file_result=$1 ;; *) $to_tool_file_cmd "$1" func_to_tool_file_result=$func_to_host_file_result ;; esac } # end func_to_tool_file # func_convert_file_noop ARG # Copy ARG to func_to_host_file_result. func_convert_file_noop () { func_to_host_file_result="$1" } # end func_convert_file_noop # func_convert_file_msys_to_w32 ARG # Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_file_result. func_convert_file_msys_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_to_host_file_result="$func_convert_core_msys_to_w32_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_w32 # func_convert_file_cygwin_to_w32 ARG # Convert file name ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_file_cygwin_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then # because $build is cygwin, we call "the" cygpath in $PATH; no need to use # LT_CYGPATH in this case. func_to_host_file_result=`cygpath -m "$1"` fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_cygwin_to_w32 # func_convert_file_nix_to_w32 ARG # Convert file name ARG from *nix to w32 format. Requires a wine environment # and a working winepath. Returns result in func_to_host_file_result. func_convert_file_nix_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_file_wine_to_w32 "$1" func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_w32 # func_convert_file_msys_to_cygwin ARG # Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_file_msys_to_cygwin () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_cygpath -u "$func_convert_core_msys_to_w32_result" func_to_host_file_result="$func_cygpath_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_cygwin # func_convert_file_nix_to_cygwin ARG # Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed # in a wine environment, working winepath, and LT_CYGPATH set. Returns result # in func_to_host_file_result. func_convert_file_nix_to_cygwin () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. func_convert_core_file_wine_to_w32 "$1" func_cygpath -u "$func_convert_core_file_wine_to_w32_result" func_to_host_file_result="$func_cygpath_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_cygwin ############################################# # $build to $host PATH CONVERSION FUNCTIONS # ############################################# # invoked via `$to_host_path_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # The result will be available in $func_to_host_path_result. # # Path separators are also converted from $build format to $host format. If # ARG begins or ends with a path separator character, it is preserved (but # converted to $host format) on output. # # All path conversion functions are named using the following convention: # file name conversion function : func_convert_file_X_to_Y () # path conversion function : func_convert_path_X_to_Y () # where, for any given $build/$host combination the 'X_to_Y' value is the # same. If conversion functions are added for new $build/$host combinations, # the two new functions must follow this pattern, or func_init_to_host_path_cmd # will break. # func_init_to_host_path_cmd # Ensures that function "pointer" variable $to_host_path_cmd is set to the # appropriate value, based on the value of $to_host_file_cmd. to_host_path_cmd= func_init_to_host_path_cmd () { $opt_debug if test -z "$to_host_path_cmd"; then func_stripname 'func_convert_file_' '' "$to_host_file_cmd" to_host_path_cmd="func_convert_path_${func_stripname_result}" fi } # func_to_host_path ARG # Converts the path ARG from $build format to $host format. Return result # in func_to_host_path_result. func_to_host_path () { $opt_debug func_init_to_host_path_cmd $to_host_path_cmd "$1" } # end func_to_host_path # func_convert_path_noop ARG # Copy ARG to func_to_host_path_result. func_convert_path_noop () { func_to_host_path_result="$1" } # end func_convert_path_noop # func_convert_path_msys_to_w32 ARG # Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_path_result. func_convert_path_msys_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # Remove leading and trailing path separator characters from ARG. MSYS # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; # and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result="$func_convert_core_msys_to_w32_result" func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_msys_to_w32 # func_convert_path_cygwin_to_w32 ARG # Convert path ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_path_cygwin_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_cygwin_to_w32 # func_convert_path_nix_to_w32 ARG # Convert path ARG from *nix to w32 format. Requires a wine environment and # a working winepath. Returns result in func_to_host_file_result. func_convert_path_nix_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_nix_to_w32 # func_convert_path_msys_to_cygwin ARG # Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_path_msys_to_cygwin () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_msys_to_w32_result" func_to_host_path_result="$func_cygpath_result" func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_msys_to_cygwin # func_convert_path_nix_to_cygwin ARG # Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a # a wine environment, working winepath, and LT_CYGPATH set. Returns result in # func_to_host_file_result. func_convert_path_nix_to_cygwin () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # Remove leading and trailing path separator characters from # ARG. msys behavior is inconsistent here, cygpath turns them # into '.;' and ';.', and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" func_to_host_path_result="$func_cygpath_result" func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_nix_to_cygwin # func_mode_compile arg... func_mode_compile () { $opt_debug # Get the compilation command and the source file. base_compile= srcfile="$nonopt" # always keep a non-empty value in "srcfile" suppress_opt=yes suppress_output= arg_mode=normal libobj= later= pie_flag= for arg do case $arg_mode in arg ) # do not "continue". Instead, add this to base_compile lastarg="$arg" arg_mode=normal ;; target ) libobj="$arg" arg_mode=normal continue ;; normal ) # Accept any command-line options. case $arg in -o) test -n "$libobj" && \ func_fatal_error "you cannot specify \`-o' more than once" arg_mode=target continue ;; -pie | -fpie | -fPIE) func_append pie_flag " $arg" continue ;; -shared | -static | -prefer-pic | -prefer-non-pic) func_append later " $arg" continue ;; -no-suppress) suppress_opt=no continue ;; -Xcompiler) arg_mode=arg # the next one goes into the "base_compile" arg list continue # The current "srcfile" will either be retained or ;; # replaced later. I would guess that would be a bug. -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result lastarg= save_ifs="$IFS"; IFS=',' for arg in $args; do IFS="$save_ifs" func_append_quoted lastarg "$arg" done IFS="$save_ifs" func_stripname ' ' '' "$lastarg" lastarg=$func_stripname_result # Add the arguments to base_compile. func_append base_compile " $lastarg" continue ;; *) # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # lastarg="$srcfile" srcfile="$arg" ;; esac # case $arg ;; esac # case $arg_mode # Aesthetically quote the previous argument. func_append_quoted base_compile "$lastarg" done # for arg case $arg_mode in arg) func_fatal_error "you must specify an argument for -Xcompile" ;; target) func_fatal_error "you must specify a target with \`-o'" ;; *) # Get the name of the library object. test -z "$libobj" && { func_basename "$srcfile" libobj="$func_basename_result" } ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo case $libobj in *.[cCFSifmso] | \ *.ada | *.adb | *.ads | *.asm | \ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) func_xform "$libobj" libobj=$func_xform_result ;; esac case $libobj in *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; *) func_fatal_error "cannot determine name of library object from \`$libobj'" ;; esac func_infer_tag $base_compile for arg in $later; do case $arg in -shared) test "$build_libtool_libs" != yes && \ func_fatal_configuration "can not build a shared library" build_old_libs=no continue ;; -static) build_libtool_libs=no build_old_libs=yes continue ;; -prefer-pic) pic_mode=yes continue ;; -prefer-non-pic) pic_mode=no continue ;; esac done func_quote_for_eval "$libobj" test "X$libobj" != "X$func_quote_for_eval_result" \ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ && func_warning "libobj name \`$libobj' may not contain shell special characters." func_dirname_and_basename "$obj" "/" "" objname="$func_basename_result" xdir="$func_dirname_result" lobj=${xdir}$objdir/$objname test -z "$base_compile" && \ func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. if test "$build_old_libs" = yes; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" fi # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in cygwin* | mingw* | pw32* | os2* | cegcc*) pic_mode=default ;; esac if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" else output_obj= need_locks=no lockfile= fi # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then $ECHO "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi func_append removelist " $output_obj" $ECHO "$srcfile" > "$lockfile" fi $opt_dry_run || $RM $removelist func_append removelist " $lockfile" trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 srcfile=$func_to_tool_file_result func_quote_for_eval "$srcfile" qsrcfile=$func_quote_for_eval_result # Only build a PIC object if we are building libtool libraries. if test "$build_libtool_libs" = yes; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile if test "$pic_mode" != no; then command="$base_compile $qsrcfile $pic_flag" else # Don't build PIC code command="$base_compile $qsrcfile" fi func_mkdir_p "$xdir$objdir" if test -z "$output_obj"; then # Place PIC objects in $objdir func_append command " -o $lobj" fi func_show_eval_locale "$command" \ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then func_show_eval '$MV "$output_obj" "$lobj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi # Allow error messages only from the first compilation. if test "$suppress_opt" = yes; then suppress_output=' >/dev/null 2>&1' fi fi # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then if test "$pic_mode" != yes; then # Don't build PIC code command="$base_compile $qsrcfile$pie_flag" else command="$base_compile $qsrcfile $pic_flag" fi if test "$compiler_c_o" = yes; then func_append command " -o $obj" fi # Suppress compiler output if we already did a PIC compilation. func_append command "$suppress_output" func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then func_show_eval '$MV "$output_obj" "$obj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi fi $opt_dry_run || { func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" # Unlock the critical section if it was locked if test "$need_locks" != no; then removelist=$lockfile $RM "$lockfile" fi } exit $EXIT_SUCCESS } $opt_help || { test "$opt_mode" = compile && func_mode_compile ${1+"$@"} } func_mode_help () { # We need to display help for each of the modes. case $opt_mode in "") # Generic help is extracted from the usage comments # at the start of this file. func_help ;; clean) $ECHO \ "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; compile) $ECHO \ "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -no-suppress do not suppress compiler output for multiple passes -prefer-pic try to build PIC objects only -prefer-non-pic try to build non-PIC objects only -shared do not build a \`.o' file suitable for static linking -static only build a \`.o' file suitable for static linking -Wc,FLAG pass FLAG directly to the compiler COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix \`.c' with the library object suffix, \`.lo'." ;; execute) $ECHO \ "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to \`-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $ECHO \ "Usage: $progname [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the \`--dry-run' option if you just want to see what would be executed." ;; install) $ECHO \ "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the \`install' or \`cp' program. The following components of INSTALL-COMMAND are treated specially: -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $ECHO \ "Usage: $progname [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible -bindir BINDIR specify path to binaries directory (for systems where libraries must be found in the PATH setting at runtime) -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened -no-fast-install disable the fast-install mode -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -objectlist FILE Use a list of object files found in FILE to specify objects -precious-files-regex REGEX don't remove output files matching REGEX -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -shared only do dynamic linking of libtool libraries -shrext SUFFIX override the standard shared library file extension -static do not do any dynamic linking of uninstalled libtool libraries -static-libtool-libs do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] -weak LIBNAME declare that the target provides the LIBNAME interface -Wc,FLAG -Xcompiler FLAG pass linker-specific FLAG directly to the compiler -Wl,FLAG -Xlinker FLAG pass linker-specific FLAG directly to the linker -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) All other options (arguments beginning with \`-') are ignored. Every other argument is treated as a filename. Files ending in \`.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only library objects (\`.lo' files) may be specified, and \`-rpath' is required, except when creating a convenience library. If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created using \`ar' and \`ranlib', or on Windows using \`lib'. If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $ECHO \ "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) func_fatal_help "invalid operation mode \`$opt_mode'" ;; esac echo $ECHO "Try \`$progname --help' for more information about other modes." } # Now that we've collected a possible --mode arg, show help if necessary if $opt_help; then if test "$opt_help" = :; then func_mode_help else { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do func_mode_help done } | sed -n '1p; 2,$s/^Usage:/ or: /p' { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do echo func_mode_help done } | sed '1d /^When reporting/,/^Report/{ H d } $x /information about other modes/d /more detailed .*MODE/d s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' fi exit $? fi # func_mode_execute arg... func_mode_execute () { $opt_debug # The first argument is the command name. cmd="$nonopt" test -z "$cmd" && \ func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. for file in $opt_dlopen; do test -f "$file" \ || func_fatal_help "\`$file' is not a file" dir= case $file in *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$lib' is not a valid libtool archive" # Read the libtool library. dlname= library_names= func_source "$file" # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && \ func_warning "\`$file' was not linked with \`-export-dynamic'" continue fi func_dirname "$file" "" "." dir="$func_dirname_result" if test -f "$dir/$objdir/$dlname"; then func_append dir "/$objdir" else if test ! -f "$dir/$dlname"; then func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" fi fi ;; *.lo) # Just add the directory containing the .lo file. func_dirname "$file" "" "." dir="$func_dirname_result" ;; *) func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir="$absdir" # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic="$magic" # Check if any of the arguments is a wrapper script. args= for file do case $file in -* | *.la | *.lo ) ;; *) # Do a test to see if this is really a libtool program. if func_ltwrapper_script_p "$file"; then func_source "$file" # Transform arg to wrapped name. file="$progdir/$program" elif func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" func_source "$func_ltwrapper_scriptname_result" # Transform arg to wrapped name. file="$progdir/$program" fi ;; esac # Quote arguments (to preserve shell metacharacters). func_append_quoted args "$file" done if test "X$opt_dry_run" = Xfalse; then if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" fi # Restore saved environment variables for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${save_$lt_var+set}\" = set; then $lt_var=\$save_$lt_var; export $lt_var else $lt_unset $lt_var fi" done # Now prepare to actually exec the command. exec_cmd="\$cmd$args" else # Display what would be done. if test -n "$shlibpath_var"; then eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" echo "export $shlibpath_var" fi $ECHO "$cmd$args" exit $EXIT_SUCCESS fi } test "$opt_mode" = execute && func_mode_execute ${1+"$@"} # func_mode_finish arg... func_mode_finish () { $opt_debug libs= libdirs= admincmds= for opt in "$nonopt" ${1+"$@"} do if test -d "$opt"; then func_append libdirs " $opt" elif test -f "$opt"; then if func_lalib_unsafe_p "$opt"; then func_append libs " $opt" else func_warning "\`$opt' is not a valid libtool archive" fi else func_fatal_error "invalid argument \`$opt'" fi done if test -n "$libs"; then if test -n "$lt_sysroot"; then sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" else sysroot_cmd= fi # Remove sysroot references if $opt_dry_run; then for lib in $libs; do echo "removing references to $lt_sysroot and \`=' prefixes from $lib" done else tmpdir=`func_mktempdir` for lib in $libs; do sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ > $tmpdir/tmp-la mv -f $tmpdir/tmp-la $lib done ${RM}r "$tmpdir" fi fi if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. func_execute_cmds "$finish_cmds" 'admincmds="$admincmds '"$cmd"'"' fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $opt_dry_run || eval "$cmds" || func_append admincmds " $cmds" fi done fi # Exit here if they wanted silent mode. $opt_silent && exit $EXIT_SUCCESS if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then echo "----------------------------------------------------------------------" echo "Libraries have been installed in:" for libdir in $libdirs; do $ECHO " $libdir" done echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" echo "specify the full pathname of the library, or use the \`-LLIBDIR'" echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then echo " - add LIBDIR to the \`$shlibpath_var' environment variable" echo " during execution" fi if test -n "$runpath_var"; then echo " - add LIBDIR to the \`$runpath_var' environment variable" echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" $ECHO " - use the \`$flag' linker flag" fi if test -n "$admincmds"; then $ECHO " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi echo echo "See any operating system documentation about shared libraries for" case $host in solaris2.[6789]|solaris2.1[0-9]) echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" echo "pages." ;; *) echo "more information, such as the ld(1) and ld.so(8) manual pages." ;; esac echo "----------------------------------------------------------------------" fi exit $EXIT_SUCCESS } test "$opt_mode" = finish && func_mode_finish ${1+"$@"} # func_mode_install arg... func_mode_install () { $opt_debug # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. case $nonopt in *shtool*) :;; *) false;; esac; then # Aesthetically quote it. func_quote_for_eval "$nonopt" install_prog="$func_quote_for_eval_result " arg=$1 shift else install_prog= arg=$nonopt fi # The real first argument should be the name of the installation program. # Aesthetically quote it. func_quote_for_eval "$arg" func_append install_prog "$func_quote_for_eval_result" install_shared_prog=$install_prog case " $install_prog " in *[\\\ /]cp\ *) install_cp=: ;; *) install_cp=false ;; esac # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir=no stripme= no_mode=: for arg do arg2= if test -n "$dest"; then func_append files " $dest" dest=$arg continue fi case $arg in -d) isdir=yes ;; -f) if $install_cp; then :; else prev=$arg fi ;; -g | -m | -o) prev=$arg ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then if test "x$prev" = x-m && test -n "$install_override_mode"; then arg2=$install_override_mode no_mode=false fi prev= else dest=$arg continue fi ;; esac # Aesthetically quote the argument. func_quote_for_eval "$arg" func_append install_prog " $func_quote_for_eval_result" if test -n "$arg2"; then func_quote_for_eval "$arg2" fi func_append install_shared_prog " $func_quote_for_eval_result" done test -z "$install_prog" && \ func_fatal_help "you must specify an install program" test -n "$prev" && \ func_fatal_help "the \`$prev' option requires an argument" if test -n "$install_override_mode" && $no_mode; then if $install_cp; then :; else func_quote_for_eval "$install_override_mode" func_append install_shared_prog " -m $func_quote_for_eval_result" fi fi if test -z "$files"; then if test -z "$dest"; then func_fatal_help "no file or destination specified" else func_fatal_help "you must specify a destination" fi fi # Strip any trailing slash from the destination. func_stripname '' '/' "$dest" dest=$func_stripname_result # Check to see that the destination is a directory. test -d "$dest" && isdir=yes if test "$isdir" = yes; then destdir="$dest" destname= else func_dirname_and_basename "$dest" "" "." destdir="$func_dirname_result" destname="$func_basename_result" # Not a directory, so check to see that there is only one file specified. set dummy $files; shift test "$#" -gt 1 && \ func_fatal_help "\`$dest' is not a directory" fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do case $file in *.lo) ;; *) func_fatal_help "\`$destdir' must be an absolute directory name" ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case $file in *.$libext) # Do the static libraries later. func_append staticlibs " $file" ;; *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$file' is not a valid libtool archive" library_names= old_library= relink_command= func_source "$file" # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) func_append current_libdirs " $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) func_append future_libdirs " $libdir" ;; esac fi func_dirname "$file" "/" "" dir="$func_dirname_result" func_append dir "$objdir" if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that # are installed to the same prefix. # At present, this check doesn't affect windows .dll's that # are installed into $libdir/../bin (currently, that works fine) # but it's something to keep an eye on. test "$inst_prefix_dir" = "$destdir" && \ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` else relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` fi func_warning "relinking \`$file'" func_show_eval "$relink_command" \ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' fi # See the names of the shared library. set dummy $library_names; shift if test -n "$1"; then realname="$1" shift srcname="$realname" test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ 'exit $?' tstripme="$stripme" case $host_os in cygwin* | mingw* | pw32* | cegcc*) case $realname in *.dll.a) tstripme="" ;; esac ;; esac if test -n "$tstripme" && test -n "$striplib"; then func_show_eval "$striplib $destdir/$realname" 'exit $?' fi if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. # Try `ln -sf' first, because the `ln' binary might depend on # the symlink we replace! Solaris /bin/ln does not understand -f, # so we also need to try rm && ln -s. for linkname do test "$linkname" != "$realname" \ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" done fi # Do each command in the postinstall commands. lib="$destdir/$realname" func_execute_cmds "$postinstall_cmds" 'exit $?' fi # Install the pseudo-library for information purposes. func_basename "$file" name="$func_basename_result" instname="$dir/$name"i func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. test -n "$old_library" && func_append staticlibs " $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # Deduce the name of the destination old-style object file. case $destfile in *.lo) func_lo2o "$destfile" staticdest=$func_lo2o_result ;; *.$objext) staticdest="$destfile" destfile= ;; *) func_fatal_help "cannot copy a libtool object to \`$destfile'" ;; esac # Install the libtool object if requested. test -n "$destfile" && \ func_show_eval "$install_prog $file $destfile" 'exit $?' # Install the old object if enabled. if test "$build_old_libs" = yes; then # Deduce the name of the old-style object file. func_lo2o "$file" staticobj=$func_lo2o_result func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' fi exit $EXIT_SUCCESS ;; *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # If the file is missing, and there is a .exe on the end, strip it # because it is most likely a libtool script we actually want to # install stripped_ext="" case $file in *.exe) if test ! -f "$file"; then func_stripname '' '.exe' "$file" file=$func_stripname_result stripped_ext=".exe" fi ;; esac # Do a test to see if this is really a libtool program. case $host in *cygwin* | *mingw*) if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" wrapper=$func_ltwrapper_scriptname_result else func_stripname '' '.exe' "$file" wrapper=$func_stripname_result fi ;; *) wrapper=$file ;; esac if func_ltwrapper_script_p "$wrapper"; then notinst_deplibs= relink_command= func_source "$wrapper" # Check the variables that should have been set. test -z "$generated_by_libtool_version" && \ func_fatal_error "invalid libtool wrapper script \`$wrapper'" finalize=yes for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then func_source "$lib" fi libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then func_warning "\`$lib' has not been installed in \`$libdir'" finalize=no fi done relink_command= func_source "$wrapper" outputname= if test "$fast_install" = no && test -n "$relink_command"; then $opt_dry_run || { if test "$finalize" = yes; then tmpdir=`func_mktempdir` func_basename "$file$stripped_ext" file="$func_basename_result" outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` $opt_silent || { func_quote_for_expand "$relink_command" eval "func_echo $func_quote_for_expand_result" } if eval "$relink_command"; then : else func_error "error: relink \`$file' with the above command before installing it" $opt_dry_run || ${RM}r "$tmpdir" continue fi file="$outputname" else func_warning "cannot relink \`$file'" fi } else # Install the binary that we compiled earlier. file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyway case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok ;; *.exe:*) destfile=$destfile.exe ;; *:*.exe) func_stripname '' '.exe' "$destfile" destfile=$func_stripname_result ;; esac ;; esac func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' $opt_dry_run || if test -n "$outputname"; then ${RM}r "$tmpdir" fi ;; esac done for file in $staticlibs; do func_basename "$file" name="$func_basename_result" # Set up the ranlib parameters. oldlib="$destdir/$name" func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 tool_oldlib=$func_to_tool_file_result func_show_eval "$install_prog \$file \$oldlib" 'exit $?' if test -n "$stripme" && test -n "$old_striplib"; then func_show_eval "$old_striplib $tool_oldlib" 'exit $?' fi # Do each command in the postinstall commands. func_execute_cmds "$old_postinstall_cmds" 'exit $?' done test -n "$future_libdirs" && \ func_warning "remember to run \`$progname --finish$future_libdirs'" if test -n "$current_libdirs"; then # Maybe just do a dry run. $opt_dry_run && current_libdirs=" -n$current_libdirs" exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' else exit $EXIT_SUCCESS fi } test "$opt_mode" = install && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p # Extract symbols from dlprefiles and create ${outputname}S.o with # a dlpreopen symbol table. func_generate_dlsyms () { $opt_debug my_outputname="$1" my_originator="$2" my_pic_p="${3-no}" my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` my_dlsyms= if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then if test -n "$NM" && test -n "$global_symbol_pipe"; then my_dlsyms="${my_outputname}S.c" else func_error "not configured to extract global symbols from dlpreopened files" fi fi if test -n "$my_dlsyms"; then case $my_dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. nlist="$output_objdir/${my_outputname}.nm" func_show_eval "$RM $nlist ${nlist}S ${nlist}T" # Parse the name list into a source file. func_verbose "creating $output_objdir/$my_dlsyms" $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ #ifdef __cplusplus extern \"C\" { #endif #if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) #pragma GCC diagnostic ignored \"-Wstrict-prototypes\" #endif /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif /* External symbol declarations for the compiler. */\ " if test "$dlself" = yes; then func_verbose "generating symbol list for \`$output'" $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` for progfile in $progfiles; do func_to_tool_file "$progfile" func_convert_file_msys_to_w32 func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then $opt_dry_run || { eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi if test -n "$export_symbols_regex"; then $opt_dry_run || { eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi # Prepare the list of exported symbols if test -z "$export_symbols"; then export_symbols="$output_objdir/$outputname.exp" $opt_dry_run || { $RM $export_symbols eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ;; esac } else $opt_dry_run || { eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; esac } fi fi for dlprefile in $dlprefiles; do func_verbose "extracting global C symbols from \`$dlprefile'" func_basename "$dlprefile" name="$func_basename_result" case $host in *cygwin* | *mingw* | *cegcc* ) # if an import library, we need to obtain dlname if func_win32_import_lib_p "$dlprefile"; then func_tr_sh "$dlprefile" eval "curr_lafile=\$libfile_$func_tr_sh_result" dlprefile_dlbasename="" if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then # Use subshell, to avoid clobbering current variable values dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` if test -n "$dlprefile_dlname" ; then func_basename "$dlprefile_dlname" dlprefile_dlbasename="$func_basename_result" else # no lafile. user explicitly requested -dlpreopen . $sharedlib_from_linklib_cmd "$dlprefile" dlprefile_dlbasename=$sharedlib_from_linklib_result fi fi $opt_dry_run || { if test -n "$dlprefile_dlbasename" ; then eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' else func_warning "Could not compute DLL name from $name" eval '$ECHO ": $name " >> "$nlist"' fi func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" } else # not an import lib $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } fi ;; *) $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } ;; esac done $opt_dry_run || { # Make sure we have at least an empty file. test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $MV "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. if $GREP -v "^: " < "$nlist" | if sort -k 3 /dev/null 2>&1; then sort -k 3 else sort +2 fi | uniq > "$nlist"S; then : else $GREP -v "^: " < "$nlist" > "$nlist"S fi if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' else echo '/* NONE */' >> "$output_objdir/$my_dlsyms" fi echo >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ typedef struct { const char *name; void *address; } lt_dlsymlist; extern LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[]; LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = {\ { \"$my_originator\", (void *) 0 }," case $need_lib_prefix in no) eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; *) eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; esac echo >> "$output_objdir/$my_dlsyms" "\ {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt_${my_prefix}_LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif\ " } # !$opt_dry_run pic_flag_for_symtable= case "$compile_command " in *" -static "*) ;; *) case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; *-*-hpux*) pic_flag_for_symtable=" $pic_flag" ;; *) if test "X$my_pic_p" != Xno; then pic_flag_for_symtable=" $pic_flag" fi ;; esac ;; esac symtab_cflags= for arg in $LTCFLAGS; do case $arg in -pie | -fpie | -fPIE) ;; *) func_append symtab_cflags " $arg" ;; esac done # Now compile the dynamic symbol file. func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' # Clean up the generated files. func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' # Transform the symbol file into the correct name. symfileobj="$output_objdir/${my_outputname}S.$objext" case $host in *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` else compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` fi ;; *) compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` ;; esac ;; *) func_fatal_error "unknown suffix for \`$my_dlsyms'" ;; esac else # We keep going just in case the user didn't refer to # lt_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. # Nullify the symbol file. compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` fi } # func_win32_libid arg # return the library type of file 'arg' # # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. # Despite the name, also deal with 64 bit binaries. func_win32_libid () { $opt_debug win32_libid_type="unknown" win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in *ar\ archive\ import\ library*) # definitely import win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then func_to_tool_file "$1" func_convert_file_msys_to_w32 win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | $SED -n -e ' 1,100{ / I /{ s,.*,import, p q } }'` case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; esac fi ;; *DLL*) win32_libid_type="x86 DLL" ;; *executable*) # but shell scripts are "executable" too... case $win32_fileres in *MS\ Windows\ PE\ Intel*) win32_libid_type="x86 DLL" ;; esac ;; esac $ECHO "$win32_libid_type" } # func_cygming_dll_for_implib ARG # # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib () { $opt_debug sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` } # func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs # # The is the core of a fallback implementation of a # platform-specific function to extract the name of the # DLL associated with the specified import library LIBNAME. # # SECTION_NAME is either .idata$6 or .idata$7, depending # on the platform and compiler that created the implib. # # Echos the name of the DLL associated with the # specified import library. func_cygming_dll_for_implib_fallback_core () { $opt_debug match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` $OBJDUMP -s --section "$1" "$2" 2>/dev/null | $SED '/^Contents of section '"$match_literal"':/{ # Place marker at beginning of archive member dllname section s/.*/====MARK====/ p d } # These lines can sometimes be longer than 43 characters, but # are always uninteresting /:[ ]*file format pe[i]\{,1\}-/d /^In archive [^:]*:/d # Ensure marker is printed /^====MARK====/p # Remove all lines with less than 43 characters /^.\{43\}/!d # From remaining lines, remove first 43 characters s/^.\{43\}//' | $SED -n ' # Join marker and all lines until next marker into a single line /^====MARK====/ b para H $ b para b :para x s/\n//g # Remove the marker s/^====MARK====// # Remove trailing dots and whitespace s/[\. \t]*$// # Print /./p' | # we now have a list, one entry per line, of the stringified # contents of the appropriate section of all members of the # archive which possess that section. Heuristic: eliminate # all those which have a first or second character that is # a '.' (that is, objdump's representation of an unprintable # character.) This should work for all archives with less than # 0x302f exports -- but will fail for DLLs whose name actually # begins with a literal '.' or a single character followed by # a '.'. # # Of those that remain, print the first one. $SED -e '/^\./d;/^.\./d;q' } # func_cygming_gnu_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is a GNU/binutils-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_gnu_implib_p () { $opt_debug func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` test -n "$func_cygming_gnu_implib_tmp" } # func_cygming_ms_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is an MS-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_ms_implib_p () { $opt_debug func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` test -n "$func_cygming_ms_implib_tmp" } # func_cygming_dll_for_implib_fallback ARG # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # # This fallback implementation is for use when $DLLTOOL # does not support the --identify-strict option. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib_fallback () { $opt_debug if func_cygming_gnu_implib_p "$1" ; then # binutils import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` elif func_cygming_ms_implib_p "$1" ; then # ms-generated import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` else # unknown sharedlib_from_linklib_result="" fi } # func_extract_an_archive dir oldlib func_extract_an_archive () { $opt_debug f_ex_an_ar_dir="$1"; shift f_ex_an_ar_oldlib="$1" if test "$lock_old_archive_extraction" = yes; then lockfile=$f_ex_an_ar_oldlib.lock until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done fi func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ 'stat=$?; rm -f "$lockfile"; exit $stat' if test "$lock_old_archive_extraction" = yes; then $opt_dry_run || rm -f "$lockfile" fi if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" fi } # func_extract_archives gentop oldlib ... func_extract_archives () { $opt_debug my_gentop="$1"; shift my_oldlibs=${1+"$@"} my_oldobjs="" my_xlib="" my_xabs="" my_xdir="" for my_xlib in $my_oldlibs; do # Extract the objects. case $my_xlib in [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac func_basename "$my_xlib" my_xlib="$func_basename_result" my_xlib_u=$my_xlib while :; do case " $extracted_archives " in *" $my_xlib_u "*) func_arith $extracted_serial + 1 extracted_serial=$func_arith_result my_xlib_u=lt$extracted_serial-$my_xlib ;; *) break ;; esac done extracted_archives="$extracted_archives $my_xlib_u" my_xdir="$my_gentop/$my_xlib_u" func_mkdir_p "$my_xdir" case $host in *-darwin*) func_verbose "Extracting $my_xabs" # Do not bother doing anything if just a dry run $opt_dry_run || { darwin_orig_dir=`pwd` cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` darwin_base_archive=`basename "$darwin_archive"` darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` if test -n "$darwin_arches"; then darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" for darwin_arch in $darwin_arches ; do func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" func_extract_an_archive "`pwd`" "${darwin_base_archive}" cd "$darwin_curdir" $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" done # $darwin_arches ## Okay now we've a bunch of thin objects, gotta fatten them up :) darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` darwin_file= darwin_files= for darwin_file in $darwin_filelist; do darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` $LIPO -create -output "$darwin_file" $darwin_files done # $darwin_filelist $RM -rf unfat-$$ cd "$darwin_orig_dir" else cd $darwin_orig_dir func_extract_an_archive "$my_xdir" "$my_xabs" fi # $darwin_arches } # !$opt_dry_run ;; *) func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` done func_extract_archives_result="$my_oldobjs" } # func_emit_wrapper [arg=no] # # Emit a libtool wrapper script on stdout. # Don't directly open a file because we may want to # incorporate the script contents within a cygwin/mingw # wrapper executable. Must ONLY be called from within # func_mode_link because it depends on a number of variables # set therein. # # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR # variable will take. If 'yes', then the emitted script # will assume that the directory in which it is stored is # the $objdir directory. This is a cygwin/mingw-specific # behavior. func_emit_wrapper () { func_emit_wrapper_arg1=${1-no} $ECHO "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of the build directory. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. sed_quote_subst='$sed_quote_subst' # Be Bourne compatible if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variables: generated_by_libtool_version='$macro_version' notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$ECHO are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then file=\"\$0\"" qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` $ECHO "\ # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$1 _LTECHO_EOF' } ECHO=\"$qECHO\" fi # Very basic option parsing. These options are (a) specific to # the libtool wrapper, (b) are identical between the wrapper # /script/ and the wrapper /executable/ which is used only on # windows platforms, and (c) all begin with the string "--lt-" # (application programs are unlikely to have options which match # this pattern). # # There are only two supported options: --lt-debug and # --lt-dump-script. There is, deliberately, no --lt-help. # # The first argument to this parsing function should be the # script's $0 value, followed by "$@". lt_option_debug= func_parse_lt_options () { lt_script_arg0=\$0 shift for lt_opt do case \"\$lt_opt\" in --lt-debug) lt_option_debug=1 ;; --lt-dump-script) lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` cat \"\$lt_dump_D/\$lt_dump_F\" exit 0 ;; --lt-*) \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 exit 1 ;; esac done # Print the debug banner immediately: if test -n \"\$lt_option_debug\"; then echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 fi } # Used when --lt-debug. Prints its arguments to stdout # (redirection is the responsibility of the caller) func_lt_dump_args () { lt_dump_args_N=1; for lt_arg do \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` done } # Core function for launching the target application func_exec_program_core () { " case $host in # Backslashes separate directories on plain windows *-*-mingw | *-*-os2* | *-cegcc*) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} " ;; *) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir/\$program\" \${1+\"\$@\"} " ;; esac $ECHO "\ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 exit 1 } # A function to encapsulate launching the target application # Strips options in the --lt-* namespace from \$@ and # launches target application with the remaining arguments. func_exec_program () { case \" \$* \" in *\\ --lt-*) for lt_wr_arg do case \$lt_wr_arg in --lt-*) ;; *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; esac shift done ;; esac func_exec_program_core \${1+\"\$@\"} } # Parse options func_parse_lt_options \"\$0\" \${1+\"\$@\"} # Find the directory that this script lives in. thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` done # Usually 'no', except on cygwin/mingw when embedded into # the cwrapper. WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then # special case for '.' if test \"\$thisdir\" = \".\"; then thisdir=\`pwd\` fi # remove .libs from thisdir case \"\$thisdir\" in *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; $objdir ) thisdir=. ;; esac fi # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" " if test "$fast_install" = yes; then $ECHO "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" if test ! -d \"\$progdir\"; then $MKDIR \"\$progdir\" else $RM \"\$progdir/\$file\" fi" $ECHO "\ # relink executable if necessary if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else $ECHO \"\$relink_command_output\" >&2 $RM \"\$progdir/\$file\" exit 1 fi fi $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || { $RM \"\$progdir/\$program\"; $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } $RM \"\$progdir/\$file\" fi" else $ECHO "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi $ECHO "\ if test -f \"\$progdir/\$program\"; then" # fixup the dll searchpath if we need to. # # Fix the DLL searchpath if we need to. Do this before prepending # to shlibpath, because on Windows, both are PATH and uninstalled # libraries must come first. if test -n "$dllsearchpath"; then $ECHO "\ # Add the dll search path components to the executable PATH PATH=$dllsearchpath:\$PATH " fi # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` export $shlibpath_var " fi $ECHO "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. func_exec_program \${1+\"\$@\"} fi else # The program doesn't exist. \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi fi\ " } # func_emit_cwrapperexe_src # emit the source code for a wrapper executable on stdout # Must ONLY be called from within func_mode_link because # it depends on a number of variable set therein. func_emit_cwrapperexe_src () { cat < #include #ifdef _MSC_VER # include # include # include #else # include # include # ifdef __CYGWIN__ # include # endif #endif #include #include #include #include #include #include #include #include /* declarations of non-ANSI functions */ #if defined(__MINGW32__) # ifdef __STRICT_ANSI__ int _putenv (const char *); # endif #elif defined(__CYGWIN__) # ifdef __STRICT_ANSI__ char *realpath (const char *, char *); int putenv (char *); int setenv (const char *, const char *, int); # endif /* #elif defined (other platforms) ... */ #endif /* portability defines, excluding path handling macros */ #if defined(_MSC_VER) # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv # define S_IXUSR _S_IEXEC # ifndef _INTPTR_T_DEFINED # define _INTPTR_T_DEFINED # define intptr_t int # endif #elif defined(__MINGW32__) # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv #elif defined(__CYGWIN__) # define HAVE_SETENV # define FOPEN_WB "wb" /* #elif defined (other platforms) ... */ #endif #if defined(PATH_MAX) # define LT_PATHMAX PATH_MAX #elif defined(MAXPATHLEN) # define LT_PATHMAX MAXPATHLEN #else # define LT_PATHMAX 1024 #endif #ifndef S_IXOTH # define S_IXOTH 0 #endif #ifndef S_IXGRP # define S_IXGRP 0 #endif /* path handling portability macros */ #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' #endif #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ defined (__OS2__) # define HAVE_DOS_BASED_FILE_SYSTEM # define FOPEN_WB "wb" # ifndef DIR_SEPARATOR_2 # define DIR_SEPARATOR_2 '\\' # endif # ifndef PATH_SEPARATOR_2 # define PATH_SEPARATOR_2 ';' # endif #endif #ifndef DIR_SEPARATOR_2 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) #else /* DIR_SEPARATOR_2 */ # define IS_DIR_SEPARATOR(ch) \ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) #endif /* DIR_SEPARATOR_2 */ #ifndef PATH_SEPARATOR_2 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) #else /* PATH_SEPARATOR_2 */ # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ #ifndef FOPEN_WB # define FOPEN_WB "w" #endif #ifndef _O_BINARY # define _O_BINARY 0 #endif #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ if (stale) { free ((void *) stale); stale = 0; } \ } while (0) #if defined(LT_DEBUGWRAPPER) static int lt_debug = 1; #else static int lt_debug = 0; #endif const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ void *xmalloc (size_t num); char *xstrdup (const char *string); const char *base_name (const char *name); char *find_executable (const char *wrapper); char *chase_symlinks (const char *pathspec); int make_executable (const char *path); int check_executable (const char *path); char *strendzap (char *str, const char *pat); void lt_debugprintf (const char *file, int line, const char *fmt, ...); void lt_fatal (const char *file, int line, const char *message, ...); static const char *nonnull (const char *s); static const char *nonempty (const char *s); void lt_setenv (const char *name, const char *value); char *lt_extend_str (const char *orig_value, const char *add, int to_end); void lt_update_exe_path (const char *name, const char *value); void lt_update_lib_path (const char *name, const char *value); char **prepare_spawn (char **argv); void lt_dump_script (FILE *f); EOF cat <= 0) && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) return 1; else return 0; } int make_executable (const char *path) { int rval = 0; struct stat st; lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", nonempty (path)); if ((!path) || (!*path)) return 0; if (stat (path, &st) >= 0) { rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); } return rval; } /* Searches for the full path of the wrapper. Returns newly allocated full path name if found, NULL otherwise Does not chase symlinks, even on platforms that support them. */ char * find_executable (const char *wrapper) { int has_slash = 0; const char *p; const char *p_next; /* static buffer for getcwd */ char tmp[LT_PATHMAX + 1]; int tmp_len; char *concat_name; lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", nonempty (wrapper)); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; /* Absolute path? */ #if defined (HAVE_DOS_BASED_FILE_SYSTEM) if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } else { #endif if (IS_DIR_SEPARATOR (wrapper[0])) { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } #if defined (HAVE_DOS_BASED_FILE_SYSTEM) } #endif for (p = wrapper; *p; p++) if (*p == '/') { has_slash = 1; break; } if (!has_slash) { /* no slashes; search PATH */ const char *path = getenv ("PATH"); if (path != NULL) { for (p = path; *p; p = p_next) { const char *q; size_t p_len; for (q = p; *q; q++) if (IS_PATH_SEPARATOR (*q)) break; p_len = q - p; p_next = (*q == '\0' ? q : q + 1); if (p_len == 0) { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); } else { concat_name = XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, p, p_len); concat_name[p_len] = '/'; strcpy (concat_name + p_len + 1, wrapper); } if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } } /* not found in PATH; assume curdir */ } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); return NULL; } char * chase_symlinks (const char *pathspec) { #ifndef S_ISLNK return xstrdup (pathspec); #else char buf[LT_PATHMAX]; struct stat s; char *tmp_pathspec = xstrdup (pathspec); char *p; int has_symlinks = 0; while (strlen (tmp_pathspec) && !has_symlinks) { lt_debugprintf (__FILE__, __LINE__, "checking path component for symlinks: %s\n", tmp_pathspec); if (lstat (tmp_pathspec, &s) == 0) { if (S_ISLNK (s.st_mode) != 0) { has_symlinks = 1; break; } /* search backwards for last DIR_SEPARATOR */ p = tmp_pathspec + strlen (tmp_pathspec) - 1; while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) p--; if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) { /* no more DIR_SEPARATORS left */ break; } *p = '\0'; } else { lt_fatal (__FILE__, __LINE__, "error accessing file \"%s\": %s", tmp_pathspec, nonnull (strerror (errno))); } } XFREE (tmp_pathspec); if (!has_symlinks) { return xstrdup (pathspec); } tmp_pathspec = realpath (pathspec, buf); if (tmp_pathspec == 0) { lt_fatal (__FILE__, __LINE__, "could not follow symlinks for %s", pathspec); } return xstrdup (tmp_pathspec); #endif } char * strendzap (char *str, const char *pat) { size_t len, patlen; assert (str != NULL); assert (pat != NULL); len = strlen (str); patlen = strlen (pat); if (patlen <= len) { str += len - patlen; if (strcmp (str, pat) == 0) *str = '\0'; } return str; } void lt_debugprintf (const char *file, int line, const char *fmt, ...) { va_list args; if (lt_debug) { (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); va_start (args, fmt); (void) vfprintf (stderr, fmt, args); va_end (args); } } static void lt_error_core (int exit_status, const char *file, int line, const char *mode, const char *message, va_list ap) { fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); if (exit_status >= 0) exit (exit_status); } void lt_fatal (const char *file, int line, const char *message, ...) { va_list ap; va_start (ap, message); lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); va_end (ap); } static const char * nonnull (const char *s) { return s ? s : "(null)"; } static const char * nonempty (const char *s) { return (s && !*s) ? "(empty)" : nonnull (s); } void lt_setenv (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_setenv) setting '%s' to '%s'\n", nonnull (name), nonnull (value)); { #ifdef HAVE_SETENV /* always make a copy, for consistency with !HAVE_SETENV */ char *str = xstrdup (value); setenv (name, str, 1); #else int len = strlen (name) + 1 + strlen (value) + 1; char *str = XMALLOC (char, len); sprintf (str, "%s=%s", name, value); if (putenv (str) != EXIT_SUCCESS) { XFREE (str); } #endif } } char * lt_extend_str (const char *orig_value, const char *add, int to_end) { char *new_value; if (orig_value && *orig_value) { int orig_value_len = strlen (orig_value); int add_len = strlen (add); new_value = XMALLOC (char, add_len + orig_value_len + 1); if (to_end) { strcpy (new_value, orig_value); strcpy (new_value + orig_value_len, add); } else { strcpy (new_value, add); strcpy (new_value + add_len, orig_value); } } else { new_value = xstrdup (add); } return new_value; } void lt_update_exe_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); /* some systems can't cope with a ':'-terminated path #' */ int len = strlen (new_value); while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) { new_value[len-1] = '\0'; } lt_setenv (name, new_value); XFREE (new_value); } } void lt_update_lib_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); lt_setenv (name, new_value); XFREE (new_value); } } EOF case $host_os in mingw*) cat <<"EOF" /* Prepares an argument vector before calling spawn(). Note that spawn() does not by itself call the command interpreter (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); GetVersionEx(&v); v.dwPlatformId == VER_PLATFORM_WIN32_NT; }) ? "cmd.exe" : "command.com"). Instead it simply concatenates the arguments, separated by ' ', and calls CreateProcess(). We must quote the arguments since Win32 CreateProcess() interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a special way: - Space and tab are interpreted as delimiters. They are not treated as delimiters if they are surrounded by double quotes: "...". - Unescaped double quotes are removed from the input. Their only effect is that within double quotes, space and tab are treated like normal characters. - Backslashes not followed by double quotes are not special. - But 2*n+1 backslashes followed by a double quote become n backslashes followed by a double quote (n >= 0): \" -> " \\\" -> \" \\\\\" -> \\" */ #define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" #define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" char ** prepare_spawn (char **argv) { size_t argc; char **new_argv; size_t i; /* Count number of arguments. */ for (argc = 0; argv[argc] != NULL; argc++) ; /* Allocate new argument vector. */ new_argv = XMALLOC (char *, argc + 1); /* Put quoted arguments into the new argument vector. */ for (i = 0; i < argc; i++) { const char *string = argv[i]; if (string[0] == '\0') new_argv[i] = xstrdup ("\"\""); else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) { int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); size_t length; unsigned int backslashes; const char *s; char *quoted_string; char *p; length = 0; backslashes = 0; if (quote_around) length++; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') length += backslashes + 1; length++; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) length += backslashes + 1; quoted_string = XMALLOC (char, length + 1); p = quoted_string; backslashes = 0; if (quote_around) *p++ = '"'; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') { unsigned int j; for (j = backslashes + 1; j > 0; j--) *p++ = '\\'; } *p++ = c; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) { unsigned int j; for (j = backslashes; j > 0; j--) *p++ = '\\'; *p++ = '"'; } *p = '\0'; new_argv[i] = quoted_string; } else new_argv[i] = (char *) string; } new_argv[argc] = NULL; return new_argv; } EOF ;; esac cat <<"EOF" void lt_dump_script (FILE* f) { EOF func_emit_wrapper yes | $SED -n -e ' s/^\(.\{79\}\)\(..*\)/\1\ \2/ h s/\([\\"]\)/\\\1/g s/$/\\n/ s/\([^\n]*\).*/ fputs ("\1", f);/p g D' cat <<"EOF" } EOF } # end: func_emit_cwrapperexe_src # func_win32_import_lib_p ARG # True if ARG is an import lib, as indicated by $file_magic_cmd func_win32_import_lib_p () { $opt_debug case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in *import*) : ;; *) false ;; esac } # func_mode_link arg... func_mode_link () { $opt_debug case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # which system we are compiling for in order to pass an extra # flag for every libtool invocation. # allow_undefined=no # FIXME: Unfortunately, there are problems with the above when trying # to make a dll which has undefined symbols, in which case not # even a static library is built. For now, we need to specify # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. allow_undefined=yes ;; *) allow_undefined=yes ;; esac libtool_args=$nonopt base_compile="$nonopt $@" compile_command=$nonopt finalize_command=$nonopt compile_rpath= finalize_rpath= compile_shlibpath= finalize_shlibpath= convenience= old_convenience= deplibs= old_deplibs= compiler_flags= linker_flags= dllsearchpath= lib_search_path=`pwd` inst_prefix_dir= new_inherited_linker_flags= avoid_version=no bindir= dlfiles= dlprefiles= dlself=no export_dynamic=no export_symbols= export_symbols_regex= generated= libobjs= ltlibs= module=no no_install=no objs= non_pic_objects= precious_files_regex= prefer_static_libs=no preload=no prev= prevarg= release= rpath= xrpath= perm_rpath= temp_rpath= thread_safe=no vinfo= vinfo_number=no weak_libs= single_module="${wl}-single_module" func_infer_tag $base_compile # We need to know -static, to get the right output filenames. for arg do case $arg in -shared) test "$build_libtool_libs" != yes && \ func_fatal_configuration "can not build a shared library" build_old_libs=no break ;; -all-static | -static | -static-libtool-libs) case $arg in -all-static) if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then func_warning "complete static linking is impossible in this configuration" fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; -static) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=built ;; -static-libtool-libs) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; esac build_libtool_libs=no build_old_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. while test "$#" -gt 0; do arg="$1" shift func_quote_for_eval "$arg" qarg=$func_quote_for_eval_unquoted_result func_append libtool_args " $func_quote_for_eval_result" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) func_append compile_command " @OUTPUT@" func_append finalize_command " @OUTPUT@" ;; esac case $prev in bindir) bindir="$arg" prev= continue ;; dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. func_append compile_command " @SYMFILE@" func_append finalize_command " @SYMFILE@" preload=yes fi case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test "$dlself" = no; then dlself=needless export_dynamic=yes fi prev= continue ;; self) if test "$prev" = dlprefiles; then dlself=yes elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then dlself=yes else dlself=needless export_dynamic=yes fi prev= continue ;; *) if test "$prev" = dlfiles; then func_append dlfiles " $arg" else func_append dlprefiles " $arg" fi prev= continue ;; esac ;; expsyms) export_symbols="$arg" test -f "$arg" \ || func_fatal_error "symbol file \`$arg' does not exist" prev= continue ;; expsyms_regex) export_symbols_regex="$arg" prev= continue ;; framework) case $host in *-*-darwin*) case "$deplibs " in *" $qarg.ltframework "*) ;; *) func_append deplibs " $qarg.ltframework" # this is fixed later ;; esac ;; esac prev= continue ;; inst_prefix) inst_prefix_dir="$arg" prev= continue ;; objectlist) if test -f "$arg"; then save_arg=$arg moreargs= for fil in `cat "$save_arg"` do # func_append moreargs " $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then func_append dlfiles " $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi done else func_fatal_error "link input file \`$arg' does not exist" fi arg=$save_arg prev= continue ;; precious_regex) precious_files_regex="$arg" prev= continue ;; release) release="-$arg" prev= continue ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; *) func_append rpath " $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; *) func_append xrpath " $arg" ;; esac fi prev= continue ;; shrext) shrext_cmds="$arg" prev= continue ;; weak) func_append weak_libs " $arg" prev= continue ;; xcclinker) func_append linker_flags " $qarg" func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xcompiler) func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xlinker) func_append linker_flags " $qarg" func_append compiler_flags " $wl$qarg" prev= func_append compile_command " $wl$qarg" func_append finalize_command " $wl$qarg" continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi # test -n "$prev" prevarg="$arg" case $arg in -all-static) if test -n "$link_static_flag"; then # See comment for -static flag below, for more details. func_append compile_command " $link_static_flag" func_append finalize_command " $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. func_fatal_error "\`-allow-undefined' must not be used because it is the default" ;; -avoid-version) avoid_version=yes continue ;; -bindir) prev=bindir continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) export_dynamic=yes continue ;; -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then func_fatal_error "more than one -exported-symbols argument is not allowed" fi if test "X$arg" = "X-export-symbols"; then prev=expsyms else prev=expsyms_regex fi continue ;; -framework) prev=framework continue ;; -inst-prefix-dir) prev=inst_prefix continue ;; # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix* | /*-*-irix*) func_append compile_command " $arg" func_append finalize_command " $arg" ;; esac continue ;; -L*) func_stripname "-L" '' "$arg" if test -z "$func_stripname_result"; then if test "$#" -gt 0; then func_fatal_error "require no space between \`-L' and \`$1'" else func_fatal_error "need path for \`-L' option" fi fi func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` test -z "$absdir" && \ func_fatal_error "cannot determine absolute directory name of \`$dir'" dir="$absdir" ;; esac case "$deplibs " in *" -L$dir "* | *" $arg "*) # Will only happen for absolute or sysroot arguments ;; *) # Preserve sysroot, but never include relative directories case $dir in [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; *) func_append deplibs " -L$dir" ;; esac func_append lib_search_path " $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; ::) dllsearchpath=$dir;; *) func_append dllsearchpath ":$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) func_append dllsearchpath ":$testbindir";; esac ;; esac continue ;; -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) # These systems don't actually have a C or math library (as such) continue ;; *-*-os2*) # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework func_append deplibs " System.ltframework" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype test "X$arg" = "X-lc" && continue ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work test "X$arg" = "X-lc" && continue ;; esac elif test "X$arg" = "X-lc_r"; then case $host in *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc_r directly, use -pthread flag. continue ;; esac fi func_append deplibs " $arg" continue ;; -module) module=yes continue ;; # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. # Darwin uses the -arch flag to determine output architecture. -model|-arch|-isysroot|--sysroot) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" prev=xcompiler continue ;; -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" case "$new_inherited_linker_flags " in *" $arg "*) ;; * ) func_append new_inherited_linker_flags " $arg" ;; esac continue ;; -multi_module) single_module="${wl}-multi_module" continue ;; -no-fast-install) fast_install=no continue ;; -no-install) case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. func_warning "\`-no-install' is ignored for $host" func_warning "assuming \`-no-fast-install' instead" fast_install=no ;; *) no_install=yes ;; esac continue ;; -no-undefined) allow_undefined=no continue ;; -objectlist) prev=objectlist continue ;; -o) prev=output ;; -precious-files-regex) prev=precious_regex continue ;; -release) prev=release continue ;; -rpath) prev=rpath continue ;; -R) prev=xrpath continue ;; -R*) func_stripname '-R' '' "$arg" dir=$func_stripname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; =*) func_stripname '=' '' "$dir" dir=$lt_sysroot$func_stripname_result ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in *" $dir "*) ;; *) func_append xrpath " $dir" ;; esac continue ;; -shared) # The effects of -shared are defined in a previous loop. continue ;; -shrext) prev=shrext continue ;; -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects # would be equivalent was wrong. It would break on at least # Digital Unix and AIX. continue ;; -thread-safe) thread_safe=yes continue ;; -version-info) prev=vinfo continue ;; -version-number) prev=vinfo vinfo_number=yes continue ;; -weak) prev=weak continue ;; -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" func_append arg " $func_quote_for_eval_result" func_append compiler_flags " $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Wl,*) func_stripname '-Wl,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" func_append arg " $wl$func_quote_for_eval_result" func_append compiler_flags " $wl$func_quote_for_eval_result" func_append linker_flags " $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Xcompiler) prev=xcompiler continue ;; -Xlinker) prev=xlinker continue ;; -XCClinker) prev=xcclinker continue ;; # -msg_* for osf cc -msg_*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; # Flags to be passed through unchanged, with rationale: # -64, -mips[0-9] enable 64-bit mode for the SGI compiler # -r[0-9][0-9]* specify processor for the SGI compiler # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler # +DA*, +DD* enable 64-bit mode for the HP compiler # -q* compiler args for the IBM compiler # -m*, -t[45]*, -txscale* architecture-specific flags for GCC # -F/path path to uninstalled frameworks, gcc on darwin # -p, -pg, --coverage, -fprofile-* profiling flags for GCC # @file GCC response files # -tp=* Portland pgcc target processor selection # --sysroot=* for sysroot support # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ -O*|-flto*|-fwhopr*|-fuse-linker-plugin) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" func_append compile_command " $arg" func_append finalize_command " $arg" func_append compiler_flags " $arg" continue ;; # Some other compiler flag. -* | +*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; *.$objext) # A standard object. func_append objs " $arg" ;; *.lo) # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then func_append dlfiles " $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi ;; *.$libext) # An archive. func_append deplibs " $arg" func_append old_deplibs " $arg" continue ;; *.la) # A libtool-controlled library. func_resolve_sysroot "$arg" if test "$prev" = dlfiles; then # This library was specified with -dlopen. func_append dlfiles " $func_resolve_sysroot_result" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. func_append dlprefiles " $func_resolve_sysroot_result" prev= else func_append deplibs " $func_resolve_sysroot_result" fi continue ;; # Some other compiler argument. *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then func_append compile_command " $arg" func_append finalize_command " $arg" fi done # argument parsing loop test -n "$prev" && \ func_fatal_help "the \`$prevarg' option requires an argument" if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" func_append compile_command " $arg" func_append finalize_command " $arg" fi oldlibs= # calculate the name of the file, without its directory func_basename "$output" outputname="$func_basename_result" libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" func_dirname "$output" "/" "" output_objdir="$func_dirname_result$objdir" func_to_tool_file "$output_objdir/" tool_output_objdir=$func_to_tool_file_result # Create the object directory. func_mkdir_p "$output_objdir" # Determine the type of output case $output in "") func_fatal_help "you must specify an output file" ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; *.la) linkmode=lib ;; *) linkmode=prog ;; # Anything else should be a program. esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do if $opt_preserve_dup_deps ; then case "$libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append libs " $deplib" done if test "$linkmode" = lib; then libs="$predeps $libs $compiler_lib_search_path $postdeps" # Compute libraries that are listed more than once in $predeps # $postdeps and mark them as special (i.e., whose duplicates are # not to be eliminated). pre_post_deps= if $opt_duplicate_compiler_generated_deps; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; esac func_append pre_post_deps " $pre_post_dep" done fi pre_post_deps= fi deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries notinst_path= # paths that contain not-installed libtool libraries case $linkmode in lib) passes="conv dlpreopen link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" ;; esac done ;; prog) compile_deplibs= finalize_deplibs= alldeplibs=no newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" ;; *) passes="conv" ;; esac for pass in $passes; do # The preopen pass in lib mode reverses $deplibs; put it back here # so that -L comes before libs that need it for instance... if test "$linkmode,$pass" = "lib,link"; then ## FIXME: Find the place where the list is rebuilt in the wrong ## order, and fix it there properly tmp_deplibs= for deplib in $deplibs; do tmp_deplibs="$deplib $tmp_deplibs" done deplibs="$tmp_deplibs" fi if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan"; then libs="$deplibs" deplibs= fi if test "$linkmode" = prog; then case $pass in dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; link) libs="$deplibs %DEPLIBS%" test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ;; esac fi if test "$linkmode,$pass" = "lib,dlpreopen"; then # Collect and forward deplibs of preopened libtool libs for lib in $dlprefiles; do # Ignore non-libtool-libs dependency_libs= func_resolve_sysroot "$lib" case $lib in *.la) func_source "$func_resolve_sysroot_result" ;; esac # Collect preopened libtool deplibs, except any this library # has declared as weak libs for deplib in $dependency_libs; do func_basename "$deplib" deplib_base=$func_basename_result case " $weak_libs " in *" $deplib_base "*) ;; *) func_append deplibs " $deplib" ;; esac done done libs="$dlprefiles" fi if test "$pass" = dlopen; then # Collect dlpreopened libraries save_deplibs="$deplibs" deplibs= fi for deplib in $libs; do lib= found=no case $deplib in -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append compiler_flags " $deplib" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi continue ;; -l*) if test "$linkmode" != lib && test "$linkmode" != prog; then func_warning "\`-l' is ignored for archives/objects" continue fi func_stripname '-l' '' "$deplib" name=$func_stripname_result if test "$linkmode" = lib; then searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" else searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" fi for searchdir in $searchdirs; do for search_ext in .la $std_shrext .so .a; do # Search the libtool library lib="$searchdir/lib${name}${search_ext}" if test -f "$lib"; then if test "$search_ext" = ".la"; then found=yes else found=no fi break 2 fi done done if test "$found" != yes; then # deplib doesn't seem to be a libtool library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue else # deplib is a libtool library # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, # We need to do some special things here, and not later. if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $deplib "*) if func_lalib_p "$lib"; then library_names= old_library= func_source "$lib" for l in $old_library $library_names; do ll="$l" done if test "X$ll" = "X$old_library" ; then # only static version available found=no func_dirname "$lib" "" "." ladir="$func_dirname_result" lib=$ladir/$old_library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue fi fi ;; *) ;; esac fi fi ;; # -l *.ltframework) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi continue ;; -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; prog) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi if test "$pass" = scan; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; *) func_warning "\`-L' is ignored for archives/objects" ;; esac # linkmode continue ;; # -L -R*) if test "$pass" = link; then func_stripname '-R' '' "$deplib" func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; *) func_append xrpath " $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; *.la) func_resolve_sysroot "$deplib" lib=$func_resolve_sysroot_result ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) # Linking convenience modules into shared libraries is allowed, # but linking other static libraries is non-portable. case " $dlpreconveniencelibs " in *" $deplib "*) ;; *) valid_a_lib=no case $deplibs_check_method in match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then valid_a_lib=yes fi ;; pass_all) valid_a_lib=yes ;; esac if test "$valid_a_lib" != yes; then echo $ECHO "*** Warning: Trying to link with static lib archive $deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because the file extensions .$libext of this argument makes me believe" echo "*** that it is just a static archive that I should not use here." else echo $ECHO "*** Warning: Linking the shared library $output against the" $ECHO "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" fi ;; esac continue ;; prog) if test "$pass" != link; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi continue ;; esac # linkmode ;; # *.$libext *.lo | *.$objext) if test "$pass" = conv; then deplibs="$deplib $deplibs" elif test "$linkmode" = prog; then if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. func_append newdlprefiles " $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append newdlfiles " $deplib" fi fi continue ;; %DEPLIBS%) alldeplibs=yes continue ;; esac # case $deplib if test "$found" = yes || test -f "$lib"; then : else func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" fi # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$lib" \ || func_fatal_error "\`$lib' is not a valid libtool archive" func_dirname "$lib" "" "." ladir="$func_dirname_result" dlname= dlopen= dlpreopen= libdir= library_names= old_library= inherited_linker_flags= # If the library was installed with an old release of libtool, # it will not redefine variables installed, or shouldnotlink installed=yes shouldnotlink=no avoidtemprpath= # Read the .la file func_source "$lib" # Convert "-framework foo" to "foo.ltframework" if test -n "$inherited_linker_flags"; then tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do case " $new_inherited_linker_flags " in *" $tmp_inherited_linker_flag "*) ;; *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; esac done fi dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then test -n "$dlopen" && func_append dlfiles " $dlopen" test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" fi if test "$pass" = conv; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # It is a libtool convenience library, so add in its objects. func_append convenience " $ladir/$objdir/$old_library" func_append old_convenience " $ladir/$objdir/$old_library" tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done elif test "$linkmode" != prog && test "$linkmode" != lib; then func_fatal_error "\`$lib' is not a convenience library" fi continue fi # $pass = conv # Get the name of the library we link against. linklib= if test -n "$old_library" && { test "$prefer_static_libs" = yes || test "$prefer_static_libs,$installed" = "built,no"; }; then linklib=$old_library else for l in $old_library $library_names; do linklib="$l" done fi if test -z "$linklib"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then func_fatal_error "cannot -dlopen a convenience library: \`$lib'" fi if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. func_append dlprefiles " $lib $dependency_libs" else func_append newdlfiles " $lib" fi continue fi # $pass = dlopen # We need an absolute path. case $ladir in [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then func_warning "cannot determine absolute directory name of \`$ladir'" func_warning "passing it literally to the linker, although it might fail" abs_ladir="$ladir" fi ;; esac func_basename "$lib" laname="$func_basename_result" # Find the relevant object directory and library name. if test "X$installed" = Xyes; then if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then func_warning "library \`$lib' was moved." dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else dir="$lt_sysroot$libdir" absdir="$lt_sysroot$libdir" fi test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then dir="$ladir" absdir="$abs_ladir" # Remove this search path later func_append notinst_path " $abs_ladir" else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later func_append notinst_path " $abs_ladir" fi fi # $installed = yes func_stripname 'lib' '.la' "$laname" name=$func_stripname_result # This library was specified with -dlpreopen. if test "$pass" = dlpreopen; then if test -z "$libdir" && test "$linkmode" = prog; then func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" fi case "$host" in # special handling for platforms with PE-DLLs. *cygwin* | *mingw* | *cegcc* ) # Linker will automatically link against shared library if both # static and shared are present. Therefore, ensure we extract # symbols from the import library if a shared library is present # (otherwise, the dlopen module name will be incorrect). We do # this by putting the import library name into $newdlprefiles. # We recover the dlopen module name by 'saving' the la file # name in a special purpose variable, and (later) extracting the # dlname from the la file. if test -n "$dlname"; then func_tr_sh "$dir/$linklib" eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" func_append newdlprefiles " $dir/$linklib" else func_append newdlprefiles " $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ func_append dlpreconveniencelibs " $dir/$old_library" fi ;; * ) # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then func_append newdlprefiles " $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ func_append dlpreconveniencelibs " $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then func_append newdlprefiles " $dir/$dlname" else func_append newdlprefiles " $dir/$linklib" fi ;; esac fi # $pass = dlpreopen if test -z "$libdir"; then # Link the convenience library if test "$linkmode" = lib; then deplibs="$dir/$old_library $deplibs" elif test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else deplibs="$lib $deplibs" # used for prog,scan pass fi continue fi if test "$linkmode" = prog && test "$pass" != link; then func_append newlib_search_path " $ladir" deplibs="$lib $deplibs" linkalldeplibs=no if test "$link_all_deplibs" != no || test -z "$library_names" || test "$build_libtool_libs" = no; then linkalldeplibs=yes fi tmp_libs= for deplib in $dependency_libs; do case $deplib in -L*) func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; esac # Need to link against all dependency_libs? if test "$linkalldeplibs" = yes; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done # for deplib continue fi # $linkmode = prog... if test "$linkmode,$pass" = "prog,link"; then if test -n "$library_names" && { { test "$prefer_static_libs" = no || test "$prefer_static_libs,$installed" = "built,yes"; } || test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then # Make sure the rpath contains only unique directories. case "$temp_rpath:" in *"$absdir:"*) ;; *) func_append temp_rpath "$absdir:" ;; esac fi # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) func_append compile_rpath " $absdir" ;; esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac ;; esac fi # $linkmode,$pass = prog,link... if test "$alldeplibs" = yes && { test "$deplibs_check_method" = pass_all || { test "$build_libtool_libs" = yes && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi fi link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs if test "$use_static_libs" = built && test "$installed" = yes; then use_static_libs=no fi if test -n "$library_names" && { test "$use_static_libs" = no || test -z "$old_library"; }; then case $host in *cygwin* | *mingw* | *cegcc*) # No point in relinking DLLs because paths are not encoded func_append notinst_deplibs " $lib" need_relink=no ;; *) if test "$installed" = no; then func_append notinst_deplibs " $lib" need_relink=yes fi ;; esac # This is a shared library # Warn about portability, can't link against -module's on some # systems (darwin). Don't bleat about dlopened modules though! dlopenmodule="" for dlpremoduletest in $dlprefiles; do if test "X$dlpremoduletest" = "X$lib"; then dlopenmodule="$dlpremoduletest" break fi done if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then echo if test "$linkmode" = prog; then $ECHO "*** Warning: Linking the executable $output against the loadable module" else $ECHO "*** Warning: Linking the shared library $output against the loadable module" fi $ECHO "*** $linklib is not portable!" fi if test "$linkmode" = lib && test "$hardcode_into_libs" = yes; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) func_append compile_rpath " $absdir" ;; esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac ;; esac fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names shift realname="$1" shift libname=`eval "\\$ECHO \"$libname_spec\""` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" elif test -n "$soname_spec"; then # bleh windows case $host in *cygwin* | mingw* | *cegcc*) func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; esac eval soname=\"$soname_spec\" else soname="$realname" fi # Make a new name for the extract_expsyms_cmds to use soroot="$soname" func_basename "$soroot" soname="$func_basename_result" func_stripname 'lib' '.dll' "$soname" newlib=libimp-$func_stripname_result.a # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else func_verbose "extracting exported symbol list from \`$soname'" func_execute_cmds "$extract_expsyms_cmds" 'exit $?' fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else func_verbose "generating import library for \`$soname'" func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" if test "$linkmode" = prog || test "$opt_mode" != relink; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) if test "$hardcode_direct" = no; then add="$dir/$linklib" case $host in *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; *-*-sysv4*uw2*) add_dir="-L$dir" ;; *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ *-*-unixware7*) add_dir="-L$dir" ;; *-*-darwin* ) # if the lib is a (non-dlopened) module then we can not # link against it, someone is ignoring the earlier warnings if /usr/bin/file -L $add 2> /dev/null | $GREP ": [^:]* bundle" >/dev/null ; then if test "X$dlopenmodule" != "X$lib"; then $ECHO "*** Warning: lib $linklib is a module, not a shared library" if test -z "$old_library" ; then echo echo "*** And there doesn't seem to be a static archive available" echo "*** The link will probably fail, sorry" else add="$dir/$old_library" fi elif test -n "$old_library"; then add="$dir/$old_library" fi fi esac elif test "$hardcode_minus_L" = no; then case $host in *-*-sunos*) add_shlibpath="$dir" ;; esac add_dir="-L$dir" add="-l$name" elif test "$hardcode_shlibpath_var" = no; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; relink) if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$absdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; *) lib_linked=no ;; esac if test "$lib_linked" != yes; then func_fatal_configuration "unsupported hardcode properties" fi if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; *) func_append compile_shlibpath "$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" if test "$hardcode_direct" != yes && test "$hardcode_minus_L" != yes && test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac fi fi fi if test "$linkmode" = prog || test "$opt_mode" = relink; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac add="-l$name" elif test "$hardcode_automatic" = yes; then if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then add="$inst_prefix_dir$libdir/$linklib" else add="$libdir/$linklib" fi else # We cannot seem to hardcode it, guess we'll fake it. add_dir="-L$libdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" fi if test "$linkmode" = prog; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" fi fi elif test "$linkmode" = prog; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test "$hardcode_direct" != unsupported; then test -n "$old_library" && linklib="$old_library" compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi elif test "$build_libtool_libs" = yes; then # Not a shared library if test "$deplibs_check_method" != pass_all; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. echo $ECHO "*** Warning: This system can not link to static lib archive $lib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then echo "*** But as you try to build a module library, libtool will still create " echo "*** a static module, that should work as long as the dlopening application" echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using \`nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi else deplibs="$dir/$old_library $deplibs" link_static=yes fi fi # link shared/static library? if test "$linkmode" = lib; then if test -n "$dependency_libs" && { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || test "$link_static" = yes; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do case $libdir in -R*) func_stripname '-R' '' "$libdir" temp_xrpath=$func_stripname_result case " $xrpath " in *" $temp_xrpath "*) ;; *) func_append xrpath " $temp_xrpath";; esac;; *) func_append temp_deplibs " $libdir";; esac done dependency_libs="$temp_deplibs" fi func_append newlib_search_path " $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" case $deplib in -L*) func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result";; *) func_resolve_sysroot "$deplib" ;; esac if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $func_resolve_sysroot_result "*) func_append specialdeplibs " $func_resolve_sysroot_result" ;; esac fi func_append tmp_libs " $func_resolve_sysroot_result" done if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do path= case $deplib in -L*) path="$deplib" ;; *.la) func_resolve_sysroot "$deplib" deplib=$func_resolve_sysroot_result func_dirname "$deplib" "" "." dir=$func_dirname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then func_warning "cannot determine absolute directory name of \`$dir'" absdir="$dir" fi ;; esac if $GREP "^installed=no" $deplib > /dev/null; then case $host in *-*-darwin*) depdepl= eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names" ; then for tmp in $deplibrary_names ; do depdepl=$tmp done if test -f "$absdir/$objdir/$depdepl" ; then depdepl="$absdir/$objdir/$depdepl" darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` if test -z "$darwin_install_name"; then darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` fi func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" path= fi fi ;; *) path="-L$absdir/$objdir" ;; esac else eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" test "$absdir" != "$libdir" && \ func_warning "\`$deplib' seems to be moved" path="-L$absdir" fi ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$path $deplibs" ;; esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs if test "$pass" = link; then if test "$linkmode" = "prog"; then compile_deplibs="$new_inherited_linker_flags $compile_deplibs" finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" else compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` fi fi dependency_libs="$newdependency_libs" if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi if test "$pass" != dlopen; then if test "$pass" != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; *) func_append lib_search_path " $dir" ;; esac done newlib_search_path= fi if test "$linkmode,$pass" != "prog,link"; then vars="deplibs" else vars="compile_deplibs finalize_deplibs" fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do # FIXME: Pedantically, this is the right thing to do, so # that some nasty dependency loop isn't accidentally # broken: #new_libs="$deplib $new_libs" # Pragmatically, this seems to cause very few problems in # practice: case $deplib in -L*) new_libs="$deplib $new_libs" ;; -R*) ;; *) # And here is the reason: when a library appears more # than once as an explicit dependence of a library, or # is implicitly linked in more than once by the # compiler, it is considered special, and multiple # occurrences thereof are not removed. Compare this # with having the same library being listed as a # dependency of multiple other libraries: in this case, # we know (pedantically, we assume) the library does not # need to be listed more than once, so we keep only the # last copy. This is not always right, but it is rare # enough that we require users that really mean to play # such unportable linking tricks to link the library # using -Wl,-lname, so that libtool does not consider it # for duplicate removal. case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$deplib $new_libs" ;; esac ;; esac ;; esac done tmp_libs= for deplib in $new_libs; do case $deplib in -L*) case " $tmp_libs " in *" $deplib "*) ;; *) func_append tmp_libs " $deplib" ;; esac ;; *) func_append tmp_libs " $deplib" ;; esac done eval $var=\"$tmp_libs\" done # for var fi # Last step: remove runtime libs from dependency_libs # (they stay in deplibs) tmp_libs= for i in $dependency_libs ; do case " $predeps $postdeps $compiler_lib_search_path " in *" $i "*) i="" ;; esac if test -n "$i" ; then func_append tmp_libs " $i" fi done dependency_libs=$tmp_libs done # for pass if test "$linkmode" = prog; then dlfiles="$newdlfiles" fi if test "$linkmode" = prog || test "$linkmode" = lib; then dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for archives" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for archives" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for archives" test -n "$xrpath" && \ func_warning "\`-R' is ignored for archives" test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for archives" test -n "$release" && \ func_warning "\`-release' is ignored for archives" test -n "$export_symbols$export_symbols_regex" && \ func_warning "\`-export-symbols' is ignored for archives" # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" func_append objs "$old_deplibs" ;; lib) # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) func_stripname 'lib' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) test "$module" = no && \ func_fatal_help "libtool library \`$output' must begin with \`lib'" if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required func_stripname '' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else func_stripname '' '.la' "$outputname" libname=$func_stripname_result fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" else echo $ECHO "*** Warning: Linking the shared library $output against the non-libtool" $ECHO "*** objects $objs is not portable!" func_append libobjs " $objs" fi fi test "$dlself" != no && \ func_warning "\`-dlopen self' is ignored for libtool libraries" set dummy $rpath shift test "$#" -gt 1 && \ func_warning "ignoring multiple \`-rpath's for a libtool library" install_libdir="$1" oldlibs= if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. # Some compilers have problems with a `.al' extension so # convenience libraries should have the same extension an # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for convenience libraries" test -n "$release" && \ func_warning "\`-release' is ignored for convenience libraries" else # Parse the version information argument. save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 shift IFS="$save_ifs" test -n "$7" && \ func_fatal_help "too many parameters to \`-version-info'" # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts # to make the code below a bit more comprehensible case $vinfo_number in yes) number_major="$1" number_minor="$2" number_revision="$3" # # There are really only two kinds -- those that # use the current revision as the major version # and those that subtract age and use age as # a minor version. But, then there is irix # which has an extra 1 added just for fun # case $version_type in # correct linux to gnu/linux during the next big refactor darwin|linux|osf|windows|none) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_revision" ;; freebsd-aout|freebsd-elf|qnx|sunos) current="$number_major" revision="$number_minor" age="0" ;; irix|nonstopux) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_minor" lt_irix_increment=no ;; *) func_fatal_configuration "$modename: unknown library version type \`$version_type'" ;; esac ;; no) current="$1" revision="$2" age="$3" ;; esac # Check that each of the things are valid numbers. case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "CURRENT \`$current' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "REVISION \`$revision' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "AGE \`$age' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac if test "$age" -gt "$current"; then func_error "AGE \`$age' is greater than the current interface number \`$current'" func_fatal_error "\`$vinfo' is not valid version information" fi # Calculate the version variables. major= versuffix= verstring= case $version_type in none) ;; darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... func_arith $current + 1 minor_current=$func_arith_result xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; freebsd-aout) major=".$current" versuffix=".$current.$revision"; ;; freebsd-elf) major=".$current" versuffix=".$current" ;; irix | nonstopux) if test "X$lt_irix_increment" = "Xno"; then func_arith $current - $age else func_arith $current - $age + 1 fi major=$func_arith_result case $version_type in nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; esac verstring="$verstring_prefix$major.$revision" # Add in all the interfaces that we are compatible with. loop=$revision while test "$loop" -ne 0; do func_arith $revision - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring_prefix$major.$iface:$verstring" done # Before this point, $major must not contain `.'. major=.$major versuffix="$major.$revision" ;; linux) # correct to gnu/linux during the next big refactor func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" ;; osf) func_arith $current - $age major=.$func_arith_result versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age while test "$loop" -ne 0; do func_arith $current - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring:${iface}.0" done # Make executables depend on our current version. func_append verstring ":${current}.0" ;; qnx) major=".$current" versuffix=".$current" ;; sunos) major=".$current" versuffix=".$current.$revision" ;; windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 filesystems. func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; *) func_fatal_configuration "unknown library version type \`$version_type'" ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely verstring= ;; *) verstring="0.0" ;; esac if test "$need_version" = no; then versuffix= else versuffix=".0.0" fi fi # Remove version info from name if versioning should be avoided if test "$avoid_version" = yes && test "$need_version" = no; then major= versuffix= verstring="" fi # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then func_warning "undefined symbols not allowed in $host shared libraries" build_libtool_libs=no build_old_libs=yes fi else # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi fi func_generate_dlsyms "$libname" "$libname" "yes" func_append libobjs " $symfileobj" test "X$libobjs" = "X " && libobjs= if test "$opt_mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= tempremovelist=`$ECHO "$output_objdir/*"` for p in $tempremovelist; do case $p in *.$objext | *.gcno) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) if test "X$precious_files_regex" != "X"; then if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 then continue fi fi func_append removelist " $p" ;; *) ;; esac done test -n "$removelist" && \ func_show_eval "${RM}r \$removelist" fi # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then func_append oldlibs " $output_objdir/$libname.$libext" # Transform .lo files to .o files. oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do func_replace_sysroot "$libdir" func_append temp_xrpath " -R$func_replace_sysroot_result" case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened old_dlfiles="$dlfiles" dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; *) func_append dlfiles " $lib" ;; esac done # Make sure dlprefiles contains only unique files old_dlprefiles="$dlprefiles" dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; *) func_append dlprefiles " $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework func_append deplibs " System.ltframework" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work ;; *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then func_append deplibs " -lc" fi ;; esac fi # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname release_save=$release versuffix_save=$versuffix major_save=$major # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? release="" versuffix="" major="" newdeplibs= droppeddeps=no case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just # implementing what was already the behavior. newdeplibs=$deplibs ;; test_compile) # This code stresses the "libraries are programs" paradigm to its # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. $opt_dry_run || $RM conftest.c cat > conftest.c </dev/null` $nocaseglob else potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` fi for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null | $GREP " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | $SED -e 10q | $EGREP "$file_magic_regex" > /dev/null; then func_append newdeplibs " $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a file magic. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. ;; match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` for a_deplib in $deplibs; do case $a_deplib in -l*) func_stripname -l '' "$a_deplib" name=$func_stripname_result if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) func_append newdeplibs " $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then libname=`eval "\\$ECHO \"$libname_spec\""` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ $EGREP "$match_pattern_regex" > /dev/null; then func_append newdeplibs " $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a regex pattern. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` done fi case $tmp_deplibs in *[!\ \ ]*) echo if test "X$deplibs_check_method" = "Xnone"; then echo "*** Warning: inter-library dependencies are not supported in this platform." else echo "*** Warning: inter-library dependencies are not known to be supported." fi echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes ;; esac ;; esac versuffix=$versuffix_save major=$major_save release=$release_save libname=$libname_save name=$name_save case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library with the System framework newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then echo echo "*** Warning: libtool could not satisfy all declared inter-library" $ECHO "*** dependencies of module $libname. Therefore, libtool will create" echo "*** a static module, that should work as long as the dlopening" echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using \`nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi else echo "*** The inter-library dependencies that have been dropped here will be" echo "*** automatically added whenever a program is linked with this library" echo "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then echo echo "*** Since this library must not contain undefined symbols," echo "*** because either the platform does not support them or" echo "*** it was explicitly requested with -no-undefined," echo "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi fi fi # Done checking deplibs! deplibs=$newdeplibs fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" case $host in *-*-darwin*) newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $deplibs " in *" -L$path/$objdir "*) func_append new_libs " -L$path/$objdir" ;; esac ;; esac done for deplib in $deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) func_append new_libs " $deplib" ;; esac ;; *) func_append new_libs " $deplib" ;; esac done deplibs="$new_libs" # All the library-specific variables (install_libdir is set above). library_names= old_library= dlname= # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then # Remove ${wl} instances when linking with ld. # FIXME: should test the right _cmds variable. case $archive_cmds in *\$LD\ *) wl= ;; esac if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" test "$opt_mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then func_replace_sysroot "$libdir" libdir=$func_replace_sysroot_result if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append dep_rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) func_append perm_rpath " $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do func_append rpath "$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi shlibpath="$finalize_shlibpath" test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi # Get the real and link names of the library. eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names shift realname="$1" shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname="$realname" fi if test -z "$dlname"; then dlname=$soname fi lib="$output_objdir/$realname" linknames= for link do func_append linknames " $link" done # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` test "X$libobjs" = "X " && libobjs= delfiles= if test -n "$export_symbols" && test -n "$include_expsyms"; then $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" export_symbols="$output_objdir/$libname.uexp" func_append delfiles " $export_symbols" fi orig_export_symbols= case $host_os in cygwin* | mingw* | cegcc*) if test -n "$export_symbols" && test -z "$export_symbols_regex"; then # exporting using user supplied symfile if test "x`$SED 1q $export_symbols`" != xEXPORTS; then # and it's NOT already a .def file. Must figure out # which of the given symbols are data symbols and tag # them as such. So, trigger use of export_symbols_cmds. # export_symbols gets reassigned inside the "prepare # the list of exported symbols" if statement, so the # include_expsyms logic still works. orig_export_symbols="$export_symbols" export_symbols= always_export_symbols=yes fi fi ;; esac # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' for cmd1 in $cmds; do IFS="$save_ifs" # Take the normal branch if the nm_file_list_spec branch # doesn't work or if tool conversion is not needed. case $nm_file_list_spec~$to_tool_file_cmd in *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) try_normal_branch=yes eval cmd=\"$cmd1\" func_len " $cmd" len=$func_len_result ;; *) try_normal_branch=no ;; esac if test "$try_normal_branch" = yes \ && { test "$len" -lt "$max_cmd_len" \ || test "$max_cmd_len" -le -1; } then func_show_eval "$cmd" 'exit $?' skipped_export=false elif test -n "$nm_file_list_spec"; then func_basename "$output" output_la=$func_basename_result save_libobjs=$libobjs save_output=$output output=${output_objdir}/${output_la}.nm func_to_tool_file "$output" libobjs=$nm_file_list_spec$func_to_tool_file_result func_append delfiles " $output" func_verbose "creating $NM input file list: $output" for obj in $save_libobjs; do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" done > "$output" eval cmd=\"$cmd1\" func_show_eval "$cmd" 'exit $?' output=$save_output libobjs=$save_libobjs skipped_export=false else # The command line is too long to execute in one step. func_verbose "using reloadable object file for export list..." skipped_export=: # Break out early, otherwise skipped_export may be # set to false by a later but shorter cmd. break fi done IFS="$save_ifs" if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi tmp_deplibs= for test_deplib in $deplibs; do case " $convenience " in *" $test_deplib "*) ;; *) func_append tmp_deplibs " $test_deplib" ;; esac done deplibs="$tmp_deplibs" if test -n "$convenience"; then if test -n "$whole_archive_flag_spec" && test "$compiler_needs_object" = yes && test -z "$libobjs"; then # extract the archives, so we have objects to list. # TODO: could optimize this to just extract one archive. whole_archive_flag_spec= fi if test -n "$whole_archive_flag_spec"; then save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= else gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $convenience func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" func_append linker_flags " $flag" fi # Make a backup of the uninstalled library when relinking if test "$opt_mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then eval test_cmds=\"$module_expsym_cmds\" cmds=$module_expsym_cmds else eval test_cmds=\"$module_cmds\" cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval test_cmds=\"$archive_expsym_cmds\" cmds=$archive_expsym_cmds else eval test_cmds=\"$archive_cmds\" cmds=$archive_cmds fi fi if test "X$skipped_export" != "X:" && func_len " $test_cmds" && len=$func_len_result && test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else # The command line is too long to link in one step, link piecewise # or, if using GNU ld and skipped_export is not :, use a linker # script. # Save the value of $output and $libobjs because we want to # use them later. If we have whole_archive_flag_spec, we # want to use save_libobjs as it was before # whole_archive_flag_spec was expanded, because we can't # assume the linker understands whole_archive_flag_spec. # This may have to be revisited, in case too many # convenience libraries get linked in and end up exceeding # the spec. if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then save_libobjs=$libobjs fi save_output=$output func_basename "$output" output_la=$func_basename_result # Clear the reloadable object creation command queue and # initialize k to one. test_cmds= concat_cmds= objlist= last_robj= k=1 if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then output=${output_objdir}/${output_la}.lnkscript func_verbose "creating GNU ld script: $output" echo 'INPUT (' > $output for obj in $save_libobjs do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" >> $output done echo ')' >> $output func_append delfiles " $output" func_to_tool_file "$output" output=$func_to_tool_file_result elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then output=${output_objdir}/${output_la}.lnk func_verbose "creating linker input file list: $output" : > $output set x $save_libobjs shift firstobj= if test "$compiler_needs_object" = yes; then firstobj="$1 " shift fi for obj do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" >> $output done func_append delfiles " $output" func_to_tool_file "$output" output=$firstobj\"$file_list_spec$func_to_tool_file_result\" else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." output=$output_objdir/$output_la-${k}.$objext eval test_cmds=\"$reload_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 # Loop over the list of objects to be linked. for obj in $save_libobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result if test "X$objlist" = X || test "$len" -lt "$max_cmd_len"; then func_append objlist " $obj" else # The command $test_cmds is almost too long, add a # command to the queue. if test "$k" -eq 1 ; then # The first file doesn't have a previous command to add. reload_objs=$objlist eval concat_cmds=\"$reload_cmds\" else # All subsequent reloadable object files will link in # the last one created. reload_objs="$objlist $last_robj" eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" fi last_robj=$output_objdir/$output_la-${k}.$objext func_arith $k + 1 k=$func_arith_result output=$output_objdir/$output_la-${k}.$objext objlist=" $obj" func_len " $last_robj" func_arith $len0 + $func_len_result len=$func_arith_result fi done # Handle the remaining objects by creating one last # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ reload_objs="$objlist $last_robj" eval concat_cmds=\"\${concat_cmds}$reload_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" fi func_append delfiles " $output" else output= fi if ${skipped_export-false}; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols libobjs=$output # Append the command to create the export file. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi fi test -n "$save_libobjs" && func_verbose "creating a temporary reloadable object file: $output" # Loop through the commands generated above and execute them. save_ifs="$IFS"; IFS='~' for cmd in $concat_cmds; do IFS="$save_ifs" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$opt_mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" if test -n "$export_symbols_regex" && ${skipped_export-false}; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi if ${skipped_export-false}; then if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi fi libobjs=$output # Restore the value of output. output=$save_output if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= fi # Expand the library linking commands again to reset the # value of $libobjs for piecewise linking. # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then cmds=$module_expsym_cmds else cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then cmds=$archive_expsym_cmds else cmds=$archive_cmds fi fi fi if test -n "$delfiles"; then # Append the command to remove temporary files to $cmds. eval cmds=\"\$cmds~\$RM $delfiles\" fi # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $dlprefiles func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$opt_mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$opt_mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then if test -z "$whole_archive_flag_spec"; then func_show_eval '${RM}r "$gentop"' fi fi exit $EXIT_SUCCESS fi # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' fi done # If -module or -export-dynamic was specified, set the dlname. if test "$module" = yes || test "$export_dynamic" = yes; then # On all known operating systems, these are identical. dlname="$soname" fi fi ;; obj) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for objects" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for objects" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for objects" test -n "$xrpath" && \ func_warning "\`-R' is ignored for objects" test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for objects" test -n "$release" && \ func_warning "\`-release' is ignored for objects" case $output in *.lo) test -n "$objs$old_deplibs" && \ func_fatal_error "cannot build library object \`$output' from non-libtool objects" libobj=$output func_lo2o "$libobj" obj=$func_lo2o_result ;; *) libobj= obj="$output" ;; esac # Delete the old objects. $opt_dry_run || $RM $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create # different ones for PIC/non-PIC, this we'll have to duplicate # the extraction. reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of # -Wl from whole_archive_flag_spec and hope we can get by with # turning comma into space.. wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` else gentop="$output_objdir/${obj}x" func_append generated " $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi # If we're not building shared, we need to use non_pic_objs test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" # Create the old-style object. reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" func_execute_cmds "$reload_cmds" 'exit $?' # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS fi if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. # $show "echo timestamp > $libobj" # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS fi if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" func_execute_cmds "$reload_cmds" 'exit $?' fi if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS ;; prog) case $host in *cygwin*) func_stripname '' '.exe' "$output" output=$func_stripname_result.exe;; esac test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for programs" test -n "$release" && \ func_warning "\`-release' is ignored for programs" test "$preload" = yes \ && test "$dlopen_support" = unknown \ && test "$dlopen_self" = unknown \ && test "$dlopen_self_static" = unknown && \ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac case $host in *-*-darwin*) # Don't allow lazy linking, it breaks C++ global constructors # But is supposedly fixed on 10.4 or later (yay!). if test "$tagname" = CXX ; then case ${MACOSX_DEPLOYMENT_TARGET-10.0} in 10.[0123]) func_append compile_command " ${wl}-bind_at_load" func_append finalize_command " ${wl}-bind_at_load" ;; esac fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $compile_deplibs " in *" -L$path/$objdir "*) func_append new_libs " -L$path/$objdir" ;; esac ;; esac done for deplib in $compile_deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) func_append new_libs " $deplib" ;; esac ;; *) func_append new_libs " $deplib" ;; esac done compile_deplibs="$new_libs" func_append compile_command " $compile_deplibs" func_append finalize_command " $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac done fi # Now hardcode the library paths rpath= hardcode_libdirs= for libdir in $compile_rpath $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) func_append perm_rpath " $libdir" ;; esac fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; ::) dllsearchpath=$libdir;; *) func_append dllsearchpath ":$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) func_append dllsearchpath ":$testbindir";; esac ;; esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi compile_rpath="$rpath" rpath= hardcode_libdirs= for libdir in $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; *) func_append finalize_perm_rpath " $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi finalize_rpath="$rpath" if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` fi func_generate_dlsyms "$outputname" "@PROGRAM@" "no" # template prelinking step if test -n "$prelink_cmds"; then func_execute_cmds "$prelink_cmds" 'exit $?' fi wrappers_required=yes case $host in *cegcc* | *mingw32ce*) # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. wrappers_required=no ;; *cygwin* | *mingw* ) if test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; *) if test "$need_relink" = no || test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; esac if test "$wrappers_required" = no; then # Replace the output file specification. compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. exit_status=0 func_show_eval "$link_command" 'exit_status=$?' if test -n "$postlink_cmds"; then func_to_tool_file "$output" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi # Delete the generated files. if test -f "$output_objdir/${outputname}S.${objext}"; then func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' fi exit $exit_status fi if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi if test -n "$finalize_shlibpath"; then finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" fi compile_var= finalize_var= if test -n "$runpath_var"; then if test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do func_append rpath "$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi if test -n "$finalize_perm_rpath"; then # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do func_append rpath "$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi fi if test "$no_install" = yes; then # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $opt_dry_run || $RM $output # Link the executable and exit func_show_eval "$link_command" 'exit $?' if test -n "$postlink_cmds"; then func_to_tool_file "$output" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi exit $EXIT_SUCCESS fi if test "$hardcode_action" = relink; then # Fast installation is not supported link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" func_warning "this platform does not like uninstalled shared libraries" func_warning "\`$output' will be relinked during installation" else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= fi else link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" fi fi # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname func_show_eval "$link_command" 'exit $?' if test -n "$postlink_cmds"; then func_to_tool_file "$output_objdir/$outputname" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi # Now create the wrapper script. func_verbose "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` fi # Only actually do things if not in dry run mode. $opt_dry_run || { # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in *.exe) func_stripname '' '.exe' "$output" output=$func_stripname_result ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe func_stripname '' '.exe' "$outputname" outputname=$func_stripname_result ;; *) exeext= ;; esac case $host in *cygwin* | *mingw* ) func_dirname_and_basename "$output" "" "." output_name=$func_basename_result output_path=$func_dirname_result cwrappersource="$output_path/$objdir/lt-$output_name.c" cwrapper="$output_path/$output_name.exe" $RM $cwrappersource $cwrapper trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 func_emit_cwrapperexe_src > $cwrappersource # The wrapper executable is built using the $host compiler, # because it contains $host paths and files. If cross- # compiling, it, like the target executable, must be # executed on the $host or under an emulation environment. $opt_dry_run || { $LTCC $LTCFLAGS -o $cwrapper $cwrappersource $STRIP $cwrapper } # Now, create the wrapper script for func_source use: func_ltwrapper_scriptname $cwrapper $RM $func_ltwrapper_scriptname_result trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 $opt_dry_run || { # note: this script will not be executed, so do not chmod. if test "x$build" = "x$host" ; then $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result else func_emit_wrapper no > $func_ltwrapper_scriptname_result fi } ;; * ) $RM $output trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 func_emit_wrapper no > $output chmod +x $output ;; esac } exit $EXIT_SUCCESS ;; esac # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then oldobjs="$libobjs_save $symfileobj" addlibs="$convenience" build_libtool_libs=no else if test "$build_libtool_libs" = module; then oldobjs="$libobjs_save" build_libtool_libs=no else oldobjs="$old_deplibs $non_pic_objects" if test "$preload" = yes && test -f "$symfileobj"; then func_append oldobjs " $symfileobj" fi fi addlibs="$old_convenience" fi if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $addlibs func_append oldobjs " $func_extract_archives_result" fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then cmds=$old_archive_from_new_cmds else # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $dlprefiles func_append oldobjs " $func_extract_archives_result" fi # POSIX demands no paths to be encoded in archives. We have # to avoid creating archives with duplicate basenames if we # might have to extract them afterwards, e.g., when creating a # static archive out of a convenience library, or when linking # the entirety of a libtool archive into another (currently # not supported by libtool). if (for obj in $oldobjs do func_basename "$obj" $ECHO "$func_basename_result" done | sort | sort -uc >/dev/null 2>&1); then : else echo "copying selected object files to avoid basename conflicts..." gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_mkdir_p "$gentop" save_oldobjs=$oldobjs oldobjs= counter=1 for obj in $save_oldobjs do func_basename "$obj" objbase="$func_basename_result" case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) while :; do # Make sure we don't pick an alternate name that also # overlaps. newobj=lt$counter-$objbase func_arith $counter + 1 counter=$func_arith_result case " $oldobjs " in *[\ /]"$newobj "*) ;; *) if test ! -f "$gentop/$newobj"; then break; fi ;; esac done func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" func_append oldobjs " $gentop/$newobj" ;; *) func_append oldobjs " $obj" ;; esac done fi func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 tool_oldlib=$func_to_tool_file_result eval cmds=\"$old_archive_cmds\" func_len " $cmds" len=$func_len_result if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds elif test -n "$archiver_list_spec"; then func_verbose "using command file archive linking..." for obj in $oldobjs do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" done > $output_objdir/$libname.libcmd func_to_tool_file "$output_objdir/$libname.libcmd" oldobjs=" $archiver_list_spec$func_to_tool_file_result" cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts func_verbose "using piecewise archive linking..." save_RANLIB=$RANLIB RANLIB=: objlist= concat_cmds= save_oldobjs=$oldobjs oldobjs= # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do last_oldobj=$obj done eval test_cmds=\"$old_archive_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 for obj in $save_oldobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result func_append objlist " $obj" if test "$len" -lt "$max_cmd_len"; then : else # the above command should be used before it gets too long oldobjs=$objlist if test "$obj" = "$last_oldobj" ; then RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" objlist= len=$len0 fi done RANLIB=$save_RANLIB oldobjs=$objlist if test "X$oldobjs" = "X" ; then eval cmds=\"\$concat_cmds\" else eval cmds=\"\$concat_cmds~\$old_archive_cmds\" fi fi fi func_execute_cmds "$cmds" 'exit $?' done test -n "$generated" && \ func_show_eval "${RM}r$generated" # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" func_verbose "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` if test "$hardcode_automatic" = yes ; then relink_command= fi # Only create the output if not a dry run. $opt_dry_run || { for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then break fi output="$output_objdir/$outputname"i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) func_basename "$deplib" name="$func_basename_result" func_resolve_sysroot "$deplib" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" ;; -L*) func_stripname -L '' "$deplib" func_replace_sysroot "$func_stripname_result" func_append newdependency_libs " -L$func_replace_sysroot_result" ;; -R*) func_stripname -R '' "$deplib" func_replace_sysroot "$func_stripname_result" func_append newdependency_libs " -R$func_replace_sysroot_result" ;; *) func_append newdependency_libs " $deplib" ;; esac done dependency_libs="$newdependency_libs" newdlfiles= for lib in $dlfiles; do case $lib in *.la) func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" ;; *) func_append newdlfiles " $lib" ;; esac done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in *.la) # Only pass preopened files to the pseudo-archive (for # eventual linking with the app. that links it) if we # didn't already link the preopened objects directly into # the library: func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" ;; esac done dlprefiles="$newdlprefiles" else newdlfiles= for lib in $dlfiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlfiles " $abs" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlprefiles " $abs" done dlprefiles="$newdlprefiles" fi $RM $output # place dlname in correct position for cygwin # In fact, it would be nice if we could use this code for all target # systems that can't hard-code library paths into their executables # and that have no shared library path variable independent of PATH, # but it turns out we can't easily determine that from inspecting # libtool variables, so we have to hard-code the OSs to which it # applies here; at the moment, that means platforms that use the PE # object format with DLL files. See the long comment at the top of # tests/bindir.at for full details. tdlname=$dlname case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) # If a -bindir argument was supplied, place the dll there. if test "x$bindir" != x ; then func_relative_path "$install_libdir" "$bindir" tdlname=$func_relative_path_result$dlname else # Otherwise fall back on heuristic. tdlname=../bin/$dlname fi ;; esac $ECHO > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='$tdlname' # Names of this library. library_names='$library_names' # The name of the static archive. old_library='$old_library' # Linker flags that can not go in dependency_libs. inherited_linker_flags='$new_inherited_linker_flags' # Libraries that this one depends upon. dependency_libs='$dependency_libs' # Names of additional weak libraries provided by this library weak_library_names='$weak_libs' # Version information for $libname. current=$current age=$age revision=$revision # Is this an already installed library? installed=$installed # Should we warn about portability when linking against -modules? shouldnotlink=$module # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test "$installed" = no && test "$need_relink" = yes; then $ECHO >> $output "\ relink_command=\"$relink_command\"" fi done } # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' ;; esac exit $EXIT_SUCCESS } { test "$opt_mode" = link || test "$opt_mode" = relink; } && func_mode_link ${1+"$@"} # func_mode_uninstall arg... func_mode_uninstall () { $opt_debug RM="$nonopt" files= rmforce= exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" for arg do case $arg in -f) func_append RM " $arg"; rmforce=yes ;; -*) func_append RM " $arg" ;; *) func_append files " $arg" ;; esac done test -z "$RM" && \ func_fatal_help "you must specify an RM program" rmdirs= for file in $files; do func_dirname "$file" "" "." dir="$func_dirname_result" if test "X$dir" = X.; then odir="$objdir" else odir="$dir/$objdir" fi func_basename "$file" name="$func_basename_result" test "$opt_mode" = uninstall && odir="$dir" # Remember odir for removal later, being careful to avoid duplicates if test "$opt_mode" = clean; then case " $rmdirs " in *" $odir "*) ;; *) func_append rmdirs " $odir" ;; esac fi # Don't error if the file doesn't exist and rm -f was used. if { test -L "$file"; } >/dev/null 2>&1 || { test -h "$file"; } >/dev/null 2>&1 || test -f "$file"; then : elif test -d "$file"; then exit_status=1 continue elif test "$rmforce" = yes; then continue fi rmfiles="$file" case $name in *.la) # Possibly a libtool archive, so verify it. if func_lalib_p "$file"; then func_source $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do func_append rmfiles " $odir/$n" done test -n "$old_library" && func_append rmfiles " $odir/$old_library" case "$opt_mode" in clean) case " $library_names " in *" $dlname "*) ;; *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; esac test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" ;; uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. ;; esac fi ;; *.lo) # Possibly a libtool object, so verify it. if func_lalib_p "$file"; then # Read the .lo file func_source $dir/$name # Add PIC object to the list of files to remove. if test -n "$pic_object" && test "$pic_object" != none; then func_append rmfiles " $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" && test "$non_pic_object" != none; then func_append rmfiles " $dir/$non_pic_object" fi fi ;; *) if test "$opt_mode" = clean ; then noexename=$name case $file in *.exe) func_stripname '' '.exe' "$file" file=$func_stripname_result func_stripname '' '.exe' "$name" noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe func_append rmfiles " $file" ;; esac # Do a test to see if this is a libtool program. if func_ltwrapper_p "$file"; then if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" relink_command= func_source $func_ltwrapper_scriptname_result func_append rmfiles " $func_ltwrapper_scriptname_result" else relink_command= func_source $dir/$noexename fi # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles func_append rmfiles " $odir/$name $odir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then func_append rmfiles " $odir/lt-$name" fi if test "X$noexename" != "X$name" ; then func_append rmfiles " $odir/lt-${noexename}.c" fi fi fi ;; esac func_show_eval "$RM $rmfiles" 'exit_status=1' done # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then func_show_eval "rmdir $dir >/dev/null 2>&1" fi done exit $exit_status } { test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && func_mode_uninstall ${1+"$@"} test -z "$opt_mode" && { help="$generic_help" func_fatal_help "you must specify a MODE" } test -z "$exec_cmd" && \ func_fatal_help "invalid operation mode \`$opt_mode'" if test -n "$exec_cmd"; then eval exec "$exec_cmd" exit $EXIT_FAILURE fi exit $exit_status # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting # choices, we go for a static library, that is the most portable, # since we can't tell whether shared libraries were disabled because # the user asked for that or because the platform doesn't support # them. This is particularly important on AIX, because we don't # support having both static and shared libraries enabled at the same # time on that platform, so we default to a shared-only configuration. # If a disable-shared tag is given, we'll fallback to a static-only # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared build_libtool_libs=no build_old_libs=yes # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: # vi:sw=2 parlatype-1.5.4/libparlatype/config.guess0000755000175000017500000012355013167645076015500 00000000000000#! /bin/sh # Attempt to guess a canonical system name. # Copyright 1992-2014 Free Software Foundation, Inc. timestamp='2014-03-23' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that # program. This Exception is an additional permission under section 7 # of the GNU General Public License, version 3 ("GPLv3"). # # Originally written by Per Bothner. # # You can get the latest version of this script from: # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD # # Please send patches with a ChangeLog entry to config-patches@gnu.org. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system \`$me' is run on. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright 1992-2014 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi trap 'exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; dummy=$tmp/dummy ; tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; case $CC_FOR_BUILD,$HOST_CC,$CC in ,,) echo "int x;" > $dummy.c ; for c in cc gcc c89 c99 ; do if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown case "${UNAME_SYSTEM}" in Linux|GNU|GNU/*) # If the system lacks a compiler, then just pick glibc. # We could probably try harder. LIBC=gnu eval $set_cc_for_build cat <<-EOF > $dummy.c #include #if defined(__UCLIBC__) LIBC=uclibc #elif defined(__dietlibc__) LIBC=dietlibc #else LIBC=gnu #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'` ;; esac # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` case "${UNAME_MACHINE_ARCH}" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; sh5el) machine=sh5le-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. case "${UNAME_MACHINE_ARCH}" in arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ELF__ then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. case "${UNAME_VERSION}" in Debian*) release='-gnu' ;; *) release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit ;; *:Bitrig:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE} exit ;; *:OpenBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} exit ;; *:ekkoBSD:*:*) echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} exit ;; *:SolidBSD:*:*) echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} exit ;; macppc:MirBSD:*:*) echo powerpc-unknown-mirbsd${UNAME_RELEASE} exit ;; *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ;; *5.*) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ;; esac # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU # types through head -n 1, so we only detect the type of CPU 0. ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") UNAME_MACHINE="alpha" ;; "EV4.5 (21064)") UNAME_MACHINE="alpha" ;; "LCA4 (21066/21068)") UNAME_MACHINE="alpha" ;; "EV5 (21164)") UNAME_MACHINE="alphaev5" ;; "EV5.6 (21164A)") UNAME_MACHINE="alphaev56" ;; "EV5.6 (21164PC)") UNAME_MACHINE="alphapca56" ;; "EV5.7 (21164PC)") UNAME_MACHINE="alphapca57" ;; "EV6 (21264)") UNAME_MACHINE="alphaev6" ;; "EV6.7 (21264A)") UNAME_MACHINE="alphaev67" ;; "EV6.8CB (21264C)") UNAME_MACHINE="alphaev68" ;; "EV6.8AL (21264B)") UNAME_MACHINE="alphaev68" ;; "EV6.8CX (21264D)") UNAME_MACHINE="alphaev68" ;; "EV6.9A (21264/EV69A)") UNAME_MACHINE="alphaev69" ;; "EV7 (21364)") UNAME_MACHINE="alphaev7" ;; "EV7.9 (21364A)") UNAME_MACHINE="alphaev79" ;; esac # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` # Reset EXIT trap before exiting to avoid spurious non-zero exit code. exitcode=$? trap '' 0 exit $exitcode ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix exit ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos exit ;; *:OS/390:*:*) echo i370-ibm-openedition exit ;; *:z/VM:*:*) echo s390-ibm-zvmoe exit ;; *:OS400:*:*) echo powerpc-ibm-os400 exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit ;; arm*:riscos:*:*|arm*:RISCOS:*:*) echo arm-unknown-riscos exit ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 exit ;; DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7; exit ;; esac ;; s390x:SunOS:*:*) echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) echo i386-pc-auroraux${UNAME_RELEASE} exit ;; i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) eval $set_cc_for_build SUN_ARCH="i386" # If there is a compiler, see if it is configured for 64-bit objects. # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. # This test works for both compilers. if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then SUN_ARCH="x86_64" fi fi echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` exit ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} ;; sun4) echo sparc-sun-sunos${UNAME_RELEASE} ;; esac exit ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit ;; m68k:machten:*:*) echo m68k-apple-machten${UNAME_RELEASE} exit ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} exit ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && SYSTEM_NAME=`$dummy $dummyarg` && { echo "$SYSTEM_NAME"; exit; } echo mips-mips-riscos${UNAME_RELEASE} exit ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax exit ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax exit ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ [ ${TARGET_BINARY_INTERFACE}x = x ] then echo m88k-dg-dgux${UNAME_RELEASE} else echo m88k-dg-dguxbcs${UNAME_RELEASE} fi else echo i586-dg-dgux${UNAME_RELEASE} fi exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` exit ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix exit ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} exit ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` then echo "$SYSTEM_NAME" else echo rs6000-ibm-aix3.2.5 fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit ;; *:AIX:*:[4567]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit ;; *:AIX:*:*) echo rs6000-ibm-aix exit ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "${sc_kernel_bits}" in 32) HP_ARCH="hppa2.0n" ;; 64) HP_ARCH="hppa2.0w" ;; '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 esac ;; esac fi if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac if [ ${HP_ARCH} = "hppa2.0w" ] then eval $set_cc_for_build # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler # generating 64-bit code. GNU and HP use different nomenclature: # # $ CC_FOR_BUILD=cc ./config.guess # => hppa2.0w-hp-hpux11.23 # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess # => hppa64-hp-hpux11.23 if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | grep -q __LP64__ then HP_ARCH="hppa2.0w" else HP_ARCH="hppa64" fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} exit ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } echo unknown-hitachi-hiuxwe2 exit ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd exit ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi exit ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; *:UNICOS/mp:*:*) echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; 5000:UNIX_System_V:4.*:*) FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} exit ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit ;; *:FreeBSD:*:*) UNAME_PROCESSOR=`/usr/bin/uname -p` case ${UNAME_PROCESSOR} in amd64) echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; *) echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; esac exit ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; *:MINGW64*:*) echo ${UNAME_MACHINE}-pc-mingw64 exit ;; *:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; *:MSYS*:*) echo ${UNAME_MACHINE}-pc-msys exit ;; i*:windows32*:*) # uname -m includes "-pc" on this system. echo ${UNAME_MACHINE}-mingw32 exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; *:Interix*:*) case ${UNAME_MACHINE} in x86) echo i586-pc-interix${UNAME_RELEASE} exit ;; authenticamd | genuineintel | EM64T) echo x86_64-unknown-interix${UNAME_RELEASE} exit ;; IA64) echo ia64-unknown-interix${UNAME_RELEASE} exit ;; esac ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit ;; 8664:Windows_NT:*) echo x86_64-pc-mks exit ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix exit ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit ;; amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) echo x86_64-unknown-cygwin exit ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin exit ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; *:GNU:*:*) # the GNU system echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit ;; *:GNU/*:*:*) # other systems with GNU libc and userland echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC} exit ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit ;; aarch64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; aarch64_be:Linux:*:*) UNAME_MACHINE=aarch64_be echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep -q ld.so.1 if test "$?" = 0 ; then LIBC="gnulibc1" ; fi echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; arc:Linux:*:* | arceb:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; arm*:Linux:*:*) eval $set_cc_for_build if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_EABI__ then echo ${UNAME_MACHINE}-unknown-linux-${LIBC} else if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_PCS_VFP then echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi else echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf fi fi exit ;; avr32*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; cris:Linux:*:*) echo ${UNAME_MACHINE}-axis-linux-${LIBC} exit ;; crisv32:Linux:*:*) echo ${UNAME_MACHINE}-axis-linux-${LIBC} exit ;; frv:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; hexagon:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; i*86:Linux:*:*) echo ${UNAME_MACHINE}-pc-linux-${LIBC} exit ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; m32r*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; mips:Linux:*:* | mips64:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef ${UNAME_MACHINE} #undef ${UNAME_MACHINE}el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=${UNAME_MACHINE}el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=${UNAME_MACHINE} #else CPU= #endif #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } ;; openrisc*:Linux:*:*) echo or1k-unknown-linux-${LIBC} exit ;; or32:Linux:*:* | or1k*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; padre:Linux:*:*) echo sparc-unknown-linux-${LIBC} exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-${LIBC} exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) echo hppa1.1-unknown-linux-${LIBC} ;; PA8*) echo hppa2.0-unknown-linux-${LIBC} ;; *) echo hppa-unknown-linux-${LIBC} ;; esac exit ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-${LIBC} exit ;; ppc:Linux:*:*) echo powerpc-unknown-linux-${LIBC} exit ;; ppc64le:Linux:*:*) echo powerpc64le-unknown-linux-${LIBC} exit ;; ppcle:Linux:*:*) echo powerpcle-unknown-linux-${LIBC} exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux-${LIBC} exit ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; tile*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; vax:Linux:*:*) echo ${UNAME_MACHINE}-dec-linux-${LIBC} exit ;; x86_64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; xtensa*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 exit ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx exit ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop exit ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos exit ;; i*86:syllable:*:*) echo ${UNAME_MACHINE}-pc-syllable exit ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp exit ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit ;; i*86:*:5:[678]*) # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} exit ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i586. # Note: whatever this is, it MUST be the same as what config.sub # prints for the "djgpp" host, or else GDB configury will decide that # this is a cross-build. echo i586-pc-msdosdjgpp exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit ;; paragon:*:*:*) echo i860-intel-osf1 exit ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi exit ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv exit ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix exit ;; M68*:*:R3V[5678]*:*) test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4; exit; } ;; NCR*:*:4.2:* | MPRAS*:*:4.2:*) OS_REL='.3' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 exit ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo ${UNAME_MACHINE}-sni-sysv4 else echo ns32k-sni-sysv fi exit ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit ;; i*86:VOS:*:*) # From Paul.Green@stratus.com. echo ${UNAME_MACHINE}-stratus-vos exit ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit ;; BePC:Haiku:*:*) # Haiku running on Intel PC compatible. echo i586-pc-haiku exit ;; x86_64:Haiku:*:*) echo x86_64-unknown-haiku exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit ;; SX-7:SUPER-UX:*:*) echo sx7-nec-superux${UNAME_RELEASE} exit ;; SX-8:SUPER-UX:*:*) echo sx8-nec-superux${UNAME_RELEASE} exit ;; SX-8R:SUPER-UX:*:*) echo sx8r-nec-superux${UNAME_RELEASE} exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit ;; *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown eval $set_cc_for_build if test "$UNAME_PROCESSOR" = unknown ; then UNAME_PROCESSOR=powerpc fi if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then case $UNAME_PROCESSOR in i386) UNAME_PROCESSOR=x86_64 ;; powerpc) UNAME_PROCESSOR=powerpc64 ;; esac fi fi elif test "$UNAME_PROCESSOR" = i386 ; then # Avoid executing cc on OS X 10.9, as it ships with a stub # that puts up a graphical alert prompting to install # developer tools. Any system running Mac OS X 10.7 or # later (Darwin 11 and later) is required to have a 64-bit # processor. This is not true of the ARM version of Darwin # that Apple uses in portable devices. UNAME_PROCESSOR=x86_64 fi echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} exit ;; *:QNX:*:4*) echo i386-pc-qnx exit ;; NEO-?:NONSTOP_KERNEL:*:*) echo neo-tandem-nsk${UNAME_RELEASE} exit ;; NSE-*:NONSTOP_KERNEL:*:*) echo nse-tandem-nsk${UNAME_RELEASE} exit ;; NSR-?:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux exit ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv exit ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} exit ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "$cputype" = "386"; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 exit ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit ;; *:TENEX:*:*) echo pdp10-unknown-tenex exit ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 exit ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 exit ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 exit ;; *:ITS:*:*) echo pdp10-unknown-its exit ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} exit ;; *:DragonFly:*:*) echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit ;; *:*VMS:*:*) UNAME_MACHINE=`(uname -p) 2>/dev/null` case "${UNAME_MACHINE}" in A*) echo alpha-dec-vms ; exit ;; I*) echo ia64-dec-vms ; exit ;; V*) echo vax-dec-vms ; exit ;; esac ;; *:XENIX:*:SysV) echo i386-pc-xenix exit ;; i*86:skyos:*:*) echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' exit ;; i*86:rdos:*:*) echo ${UNAME_MACHINE}-pc-rdos exit ;; i*86:AROS:*:*) echo ${UNAME_MACHINE}-pc-aros exit ;; x86_64:VMkernel:*:*) echo ${UNAME_MACHINE}-unknown-esx exit ;; esac cat >&2 < in order to provide the needed information to handle your system. config.guess timestamp = $timestamp uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = ${UNAME_MACHINE} UNAME_RELEASE = ${UNAME_RELEASE} UNAME_SYSTEM = ${UNAME_SYSTEM} UNAME_VERSION = ${UNAME_VERSION} EOF exit 1 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: parlatype-1.5.4/libparlatype/aclocal.m40000644000175000017500000016304313204324032014773 00000000000000# generated automatically by aclocal 1.14.1 -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, [m4_warning([this file was generated for autoconf 2.69. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically 'autoreconf'.])]) dnl GLIB_GSETTINGS dnl Defines GSETTINGS_SCHEMAS_INSTALL which controls whether dnl the schema should be compiled dnl AC_DEFUN([GLIB_GSETTINGS], [ m4_pattern_allow([AM_V_GEN]) AC_ARG_ENABLE(schemas-compile, AS_HELP_STRING([--disable-schemas-compile], [Disable regeneration of gschemas.compiled on install]), [case ${enableval} in yes) GSETTINGS_DISABLE_SCHEMAS_COMPILE="" ;; no) GSETTINGS_DISABLE_SCHEMAS_COMPILE="1" ;; *) AC_MSG_ERROR([bad value ${enableval} for --enable-schemas-compile]) ;; esac]) AC_SUBST([GSETTINGS_DISABLE_SCHEMAS_COMPILE]) PKG_PROG_PKG_CONFIG([0.16]) AC_SUBST(gsettingsschemadir, [${datadir}/glib-2.0/schemas]) if test x$cross_compiling != xyes; then GLIB_COMPILE_SCHEMAS=`$PKG_CONFIG --variable glib_compile_schemas gio-2.0` else AC_PATH_PROG(GLIB_COMPILE_SCHEMAS, glib-compile-schemas) fi AC_SUBST(GLIB_COMPILE_SCHEMAS) if test "x$GLIB_COMPILE_SCHEMAS" = "x"; then ifelse([$2],,[AC_MSG_ERROR([glib-compile-schemas not found.])],[$2]) else ifelse([$1],,[:],[$1]) fi GSETTINGS_RULES=' .PHONY : uninstall-gsettings-schemas install-gsettings-schemas clean-gsettings-schemas mostlyclean-am: clean-gsettings-schemas gsettings__enum_file = $(addsuffix .enums.xml,$(gsettings_ENUM_NAMESPACE)) %.gschema.valid: %.gschema.xml $(gsettings__enum_file) $(AM_V_GEN) $(GLIB_COMPILE_SCHEMAS) --strict --dry-run $(addprefix --schema-file=,$(gsettings__enum_file)) --schema-file=$< && mkdir -p [$](@D) && touch [$]@ all-am: $(gsettings_SCHEMAS:.xml=.valid) uninstall-am: uninstall-gsettings-schemas install-data-am: install-gsettings-schemas .SECONDARY: $(gsettings_SCHEMAS) install-gsettings-schemas: $(gsettings_SCHEMAS) $(gsettings__enum_file) @$(NORMAL_INSTALL) if test -n "$^"; then \ test -z "$(gsettingsschemadir)" || $(MKDIR_P) "$(DESTDIR)$(gsettingsschemadir)"; \ $(INSTALL_DATA) $^ "$(DESTDIR)$(gsettingsschemadir)"; \ test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir); \ fi uninstall-gsettings-schemas: @$(NORMAL_UNINSTALL) @list='\''$(gsettings_SCHEMAS) $(gsettings__enum_file)'\''; test -n "$(gsettingsschemadir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e '\''s|^.*/||'\''`; \ test -n "$$files" || exit 0; \ echo " ( cd '\''$(DESTDIR)$(gsettingsschemadir)'\'' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(gsettingsschemadir)" && rm -f $$files test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir) clean-gsettings-schemas: rm -f $(gsettings_SCHEMAS:.xml=.valid) $(gsettings__enum_file) ifdef gsettings_ENUM_NAMESPACE $(gsettings__enum_file): $(gsettings_ENUM_FILES) $(AM_V_GEN) glib-mkenums --comments '\'''\'' --fhead "" --vhead " <@type@ id='\''$(gsettings_ENUM_NAMESPACE).@EnumName@'\''>" --vprod " " --vtail " " --ftail "" [$]^ > [$]@.tmp && mv [$]@.tmp [$]@ endif ' _GSETTINGS_SUBST(GSETTINGS_RULES) ]) dnl _GSETTINGS_SUBST(VARIABLE) dnl Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST AC_DEFUN([_GSETTINGS_SUBST], [ AC_SUBST([$1]) m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])]) ] ) dnl -*- mode: autoconf -*- dnl Copyright 2009 Johan Dahlin dnl dnl This file is free software; the author(s) gives unlimited dnl permission to copy and/or distribute it, with or without dnl modifications, as long as this notice is preserved. dnl # serial 1 m4_define([_GOBJECT_INTROSPECTION_CHECK_INTERNAL], [ AC_BEFORE([AC_PROG_LIBTOOL],[$0])dnl setup libtool first AC_BEFORE([AM_PROG_LIBTOOL],[$0])dnl setup libtool first AC_BEFORE([LT_INIT],[$0])dnl setup libtool first dnl enable/disable introspection m4_if([$2], [require], [dnl enable_introspection=yes ],[dnl AC_ARG_ENABLE(introspection, AS_HELP_STRING([--enable-introspection[=@<:@no/auto/yes@:>@]], [Enable introspection for this build]),, [enable_introspection=auto]) ])dnl AC_MSG_CHECKING([for gobject-introspection]) dnl presence/version checking AS_CASE([$enable_introspection], [no], [dnl found_introspection="no (disabled, use --enable-introspection to enable)" ],dnl [yes],[dnl PKG_CHECK_EXISTS([gobject-introspection-1.0],, AC_MSG_ERROR([gobject-introspection-1.0 is not installed])) PKG_CHECK_EXISTS([gobject-introspection-1.0 >= $1], found_introspection=yes, AC_MSG_ERROR([You need to have gobject-introspection >= $1 installed to build AC_PACKAGE_NAME])) ],dnl [auto],[dnl PKG_CHECK_EXISTS([gobject-introspection-1.0 >= $1], found_introspection=yes, found_introspection=no) dnl Canonicalize enable_introspection enable_introspection=$found_introspection ],dnl [dnl AC_MSG_ERROR([invalid argument passed to --enable-introspection, should be one of @<:@no/auto/yes@:>@]) ])dnl AC_MSG_RESULT([$found_introspection]) INTROSPECTION_SCANNER= INTROSPECTION_COMPILER= INTROSPECTION_GENERATE= INTROSPECTION_GIRDIR= INTROSPECTION_TYPELIBDIR= if test "x$found_introspection" = "xyes"; then INTROSPECTION_SCANNER=`$PKG_CONFIG --variable=g_ir_scanner gobject-introspection-1.0` INTROSPECTION_COMPILER=`$PKG_CONFIG --variable=g_ir_compiler gobject-introspection-1.0` INTROSPECTION_GENERATE=`$PKG_CONFIG --variable=g_ir_generate gobject-introspection-1.0` INTROSPECTION_GIRDIR=`$PKG_CONFIG --variable=girdir gobject-introspection-1.0` INTROSPECTION_TYPELIBDIR="$($PKG_CONFIG --variable=typelibdir gobject-introspection-1.0)" INTROSPECTION_CFLAGS=`$PKG_CONFIG --cflags gobject-introspection-1.0` INTROSPECTION_LIBS=`$PKG_CONFIG --libs gobject-introspection-1.0` INTROSPECTION_MAKEFILE=`$PKG_CONFIG --variable=datadir gobject-introspection-1.0`/gobject-introspection-1.0/Makefile.introspection fi AC_SUBST(INTROSPECTION_SCANNER) AC_SUBST(INTROSPECTION_COMPILER) AC_SUBST(INTROSPECTION_GENERATE) AC_SUBST(INTROSPECTION_GIRDIR) AC_SUBST(INTROSPECTION_TYPELIBDIR) AC_SUBST(INTROSPECTION_CFLAGS) AC_SUBST(INTROSPECTION_LIBS) AC_SUBST(INTROSPECTION_MAKEFILE) AM_CONDITIONAL(HAVE_INTROSPECTION, test "x$found_introspection" = "xyes") ]) dnl Usage: dnl GOBJECT_INTROSPECTION_CHECK([minimum-g-i-version]) AC_DEFUN([GOBJECT_INTROSPECTION_CHECK], [ _GOBJECT_INTROSPECTION_CHECK_INTERNAL([$1]) ]) dnl Usage: dnl GOBJECT_INTROSPECTION_REQUIRE([minimum-g-i-version]) AC_DEFUN([GOBJECT_INTROSPECTION_REQUIRE], [ _GOBJECT_INTROSPECTION_CHECK_INTERNAL([$1], [require]) ]) # nls.m4 serial 5 (gettext-0.18) dnl Copyright (C) 1995-2003, 2005-2006, 2008-2014 Free Software Foundation, dnl Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl dnl This file can can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU dnl gettext package package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Authors: dnl Ulrich Drepper , 1995-2000. dnl Bruno Haible , 2000-2003. AC_PREREQ([2.50]) AC_DEFUN([AM_NLS], [ AC_MSG_CHECKING([whether NLS is requested]) dnl Default is enabled NLS AC_ARG_ENABLE([nls], [ --disable-nls do not use Native Language Support], USE_NLS=$enableval, USE_NLS=yes) AC_MSG_RESULT([$USE_NLS]) AC_SUBST([USE_NLS]) ]) # pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- # serial 1 (pkg-config-0.24) # # Copyright © 2004 Scott James Remnant . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # PKG_PROG_PKG_CONFIG([MIN-VERSION]) # ---------------------------------- AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) fi if test -n "$PKG_CONFIG"; then _pkg_min_version=m4_default([$1], [0.9.0]) AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) PKG_CONFIG="" fi fi[]dnl ])# PKG_PROG_PKG_CONFIG # PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) # # Check to see whether a particular set of modules exists. Similar # to PKG_CHECK_MODULES(), but does not set variables or print errors. # # Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) # only at the first occurence in configure.ac, so if the first place # it's called might be skipped (such as if it is within an "if", you # have to call PKG_CHECK_EXISTS manually # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl if test -n "$PKG_CONFIG" && \ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then m4_default([$2], [:]) m4_ifvaln([$3], [else $3])dnl fi]) # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) # --------------------------------------------- m4_define([_PKG_CONFIG], [if test -n "$$1"; then pkg_cv_[]$1="$$1" elif test -n "$PKG_CONFIG"; then PKG_CHECK_EXISTS([$3], [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes ], [pkg_failed=yes]) else pkg_failed=untried fi[]dnl ])# _PKG_CONFIG # _PKG_SHORT_ERRORS_SUPPORTED # ----------------------------- AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi[]dnl ])# _PKG_SHORT_ERRORS_SUPPORTED # PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], # [ACTION-IF-NOT-FOUND]) # # # Note that if there is a possibility the first call to # PKG_CHECK_MODULES might not happen, you should be sure to include an # explicit call to PKG_PROG_PKG_CONFIG in your configure.ac # # # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl pkg_failed=no AC_MSG_CHECKING([for $1]) _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) _PKG_CONFIG([$1][_LIBS], [libs], [$2]) m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS and $1[]_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.]) if test $pkg_failed = yes; then AC_MSG_RESULT([no]) _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` else $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD m4_default([$4], [AC_MSG_ERROR( [Package requirements ($2) were not met: $$1_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. _PKG_TEXT])[]dnl ]) elif test $pkg_failed = untried; then AC_MSG_RESULT([no]) m4_default([$4], [AC_MSG_FAILURE( [The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. _PKG_TEXT To get pkg-config, see .])[]dnl ]) else $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS $1[]_LIBS=$pkg_cv_[]$1[]_LIBS AC_MSG_RESULT([yes]) $3 fi[]dnl ])# PKG_CHECK_MODULES # PKG_INSTALLDIR(DIRECTORY) # ------------------------- # Substitutes the variable pkgconfigdir as the location where a module # should install pkg-config .pc files. By default the directory is # $libdir/pkgconfig, but the default can be changed by passing # DIRECTORY. The user can override through the --with-pkgconfigdir # parameter. AC_DEFUN([PKG_INSTALLDIR], [m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])]) m4_pushdef([pkg_description], [pkg-config installation directory @<:@]pkg_default[@:>@]) AC_ARG_WITH([pkgconfigdir], [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],, [with_pkgconfigdir=]pkg_default) AC_SUBST([pkgconfigdir], [$with_pkgconfigdir]) m4_popdef([pkg_default]) m4_popdef([pkg_description]) ]) dnl PKG_INSTALLDIR # PKG_NOARCH_INSTALLDIR(DIRECTORY) # ------------------------- # Substitutes the variable noarch_pkgconfigdir as the location where a # module should install arch-independent pkg-config .pc files. By # default the directory is $datadir/pkgconfig, but the default can be # changed by passing DIRECTORY. The user can override through the # --with-noarch-pkgconfigdir parameter. AC_DEFUN([PKG_NOARCH_INSTALLDIR], [m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])]) m4_pushdef([pkg_description], [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@]) AC_ARG_WITH([noarch-pkgconfigdir], [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],, [with_noarch_pkgconfigdir=]pkg_default) AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir]) m4_popdef([pkg_default]) m4_popdef([pkg_description]) ]) dnl PKG_NOARCH_INSTALLDIR # PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE, # [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) # ------------------------------------------- # Retrieves the value of the pkg-config variable for the given module. AC_DEFUN([PKG_CHECK_VAR], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl _PKG_CONFIG([$1], [variable="][$3]["], [$2]) AS_VAR_COPY([$1], [pkg_cv_][$1]) AS_VAR_IF([$1], [""], [$5], [$4])dnl ])# PKG_CHECK_VAR # Copyright (C) 2002-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.14' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.14.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.14.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to # '$srcdir', '$srcdir/..', or '$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is '.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl # Expand $ac_aux_dir to an absolute path. am_aux_dir=`cd "$ac_aux_dir" && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ([2.52])dnl m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], [$1], [CXX], [depcc="$CXX" am_compiler_list=], [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], [$1], [UPC], [depcc="$UPC" am_compiler_list=], [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi am__universal=false m4_case([$1], [CC], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac], [CXX], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac]) for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES. AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE([dependency-tracking], [dnl AS_HELP_STRING( [--enable-dependency-tracking], [do not reject slow dependency extractors]) AS_HELP_STRING( [--disable-dependency-tracking], [speeds up one-time build])]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl AC_SUBST([am__nodep])dnl _AM_SUBST_NOTMAKE([am__nodep])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named 'Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each '.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # AM_EXTRA_RECURSIVE_TARGETS -*- Autoconf -*- # Copyright (C) 2012-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_EXTRA_RECURSIVE_TARGETS # -------------------------- # Define the list of user recursive targets. This macro exists only to # be traced by Automake, which will ensure that a proper definition of # user-defined recursive targets (and associated rules) is propagated # into all the generated Makefiles. # TODO: We should really reject non-literal arguments here... AC_DEFUN([AM_EXTRA_RECURSIVE_TARGETS], []) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC]) [_AM_PROG_CC_C_O ]) # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.65])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [AC_DIAGNOSE([obsolete], [$0: two- and three-arguments forms are deprecated.]) m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if( m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), [ok:ok],, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) AM_MISSING_PROG([AUTOCONF], [autoconf]) AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) AM_MISSING_PROG([AUTOHEADER], [autoheader]) AM_MISSING_PROG([MAKEINFO], [makeinfo]) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # AC_SUBST([mkdir_p], ['$(MKDIR_P)']) # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES([CC])], [m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES([CXX])], [m4_define([AC_PROG_CXX], m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES([OBJC])], [m4_define([AC_PROG_OBJC], m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], [_AM_DEPENDENCIES([OBJCXX])], [m4_define([AC_PROG_OBJCXX], m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl ]) AC_REQUIRE([AM_SILENT_RULES])dnl dnl The testsuite driver may need to know about EXEEXT, so add the dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl # POSIX will say in a future version that running "rm -f" with no argument # is OK; and we want to be able to make that assumption in our Makefile # recipes. So use an aggressive probe to check that the usage we want is # actually supported "in the wild" to an acceptable degree. # See automake bug#10828. # To make any issue more visible, cause the running configure to be aborted # by default if the 'rm' program in use doesn't match our expectations; the # user can still override this though. if rm -f && rm -fr && rm -rf; then : OK; else cat >&2 <<'END' Oops! Your 'rm' program seems unable to run without file operands specified on the command line, even when the '-f' option is present. This is contrary to the behaviour of most rm programs out there, and not conforming with the upcoming POSIX standard: Please tell bug-automake@gnu.org about your system, including the value of your $PATH and any error possibly output before this message. This can help us improve future automake versions. END if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then echo 'Configuration will proceed anyway, since you have set the' >&2 echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 echo >&2 else cat >&2 <<'END' Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation that behaves properly: . If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM to "yes", and re-run configure. END AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) fi fi ]) dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi AC_SUBST([install_sh])]) # Copyright (C) 2003-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from 'make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it is modern enough. # If it is, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= AC_MSG_WARN(['missing' script is too old or missing]) fi ]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # -------------------- # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), [1])]) # _AM_SET_OPTIONS(OPTIONS) # ------------------------ # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Copyright (C) 1999-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_CC_C_O # --------------- # Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC # to automatically call this. AC_DEFUN([_AM_PROG_CC_C_O], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([compile])dnl AC_LANG_PUSH([C])dnl AC_CACHE_CHECK( [whether $CC understands -c and -o together], [am_cv_prog_cc_c_o], [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done rm -f core conftest* unset am_i]) if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi AC_LANG_POP([C])]) # For backward compatibility. AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_RUN_LOG(COMMAND) # ------------------- # Run COMMAND, save the exit status in ac_status, and log it. # (This has been adapted from Autoconf's _AC_RUN_LOG macro.) AC_DEFUN([AM_RUN_LOG], [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD (exit $ac_status); }]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi if test "$[2]" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT([yes]) # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi AC_CONFIG_COMMANDS_PRE( [AC_MSG_CHECKING([that generated files are newer than configure]) if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi AC_MSG_RESULT([done])]) rm -f conftest.file ]) # Copyright (C) 2009-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SILENT_RULES([DEFAULT]) # -------------------------- # Enable less verbose build rules; with the default set to DEFAULT # ("yes" being less verbose, "no" or empty being verbose). AC_DEFUN([AM_SILENT_RULES], [AC_ARG_ENABLE([silent-rules], [dnl AS_HELP_STRING( [--enable-silent-rules], [less verbose build output (undo: "make V=1")]) AS_HELP_STRING( [--disable-silent-rules], [verbose build output (undo: "make V=0")])dnl ]) case $enable_silent_rules in @%:@ ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; esac dnl dnl A few 'make' implementations (e.g., NonStop OS and NextStep) dnl do not support nested variable expansions. dnl See automake bug#9928 and bug#10237. am_make=${MAKE-make} AC_CACHE_CHECK([whether $am_make supports nested variables], [am_cv_make_support_nested_variables], [if AS_ECHO([['TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi]) if test $am_cv_make_support_nested_variables = yes; then dnl Using '$V' instead of '$(V)' breaks IRIX make. AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AC_SUBST([AM_V])dnl AM_SUBST_NOTMAKE([AM_V])dnl AC_SUBST([AM_DEFAULT_V])dnl AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl AC_SUBST([AM_DEFAULT_VERBOSITY])dnl AM_BACKSLASH='\' AC_SUBST([AM_BACKSLASH])dnl _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl ]) # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor 'install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in "make install-strip", and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # AM_SUBST_NOTMAKE(VARIABLE) # -------------------------- # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of 'v7', 'ustar', or 'pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar # AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AC_SUBST([AMTAR], ['$${TAR-tar}']) # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' m4_if([$1], [v7], [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], [m4_case([$1], [ustar], [# The POSIX 1988 'ustar' format is defined with fixed-size fields. # There is notably a 21 bits limit for the UID and the GID. In fact, # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 # and bug#13588). am_max_uid=2097151 # 2^21 - 1 am_max_gid=$am_max_uid # The $UID and $GID variables are not portable, so we need to resort # to the POSIX-mandated id(1) utility. Errors in the 'id' calls # below are definitely unexpected, so allow the users to see them # (that is, avoid stderr redirection). am_uid=`id -u || echo unknown` am_gid=`id -g || echo unknown` AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) if test $am_uid -le $am_max_uid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) if test $am_gid -le $am_max_gid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi], [pax], [], [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Go ahead even if we have the value already cached. We do so because we # need to set the values for the 'am__tar' and 'am__untar' variables. _am_tools=${am_cv_prog_tar_$1-$_am_tools} for _am_tool in $_am_tools; do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works. rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR m4_include([m4/ax_code_coverage.m4]) m4_include([m4/ax_valgrind_check.m4]) m4_include([m4/glibtests.m4]) m4_include([m4/gtk-doc.m4]) m4_include([m4/intltool.m4]) m4_include([m4/libtool.m4]) m4_include([m4/ltoptions.m4]) m4_include([m4/ltsugar.m4]) m4_include([m4/ltversion.m4]) m4_include([m4/lt~obsolete.m4]) parlatype-1.5.4/libparlatype/tests/0000755000175000017500000000000013204324053014351 500000000000000parlatype-1.5.4/libparlatype/tests/README0000644000175000017500000000063513176574165015200 00000000000000Unit tests for libparlatype, run with `make check`. Valgrind test with `make check-valgrind-memcheck`. Valgrind suppression files downloaded from: https://cgit.freedesktop.org/gstreamer/common/tree/gst.supp https://git.gnome.org/browse/glib/tree/glib.supp Code coverage test with `make check-code-coverage`. Compile lib with --enable-code-coverage first. Result is in libparlatype-{VERSION}-coverage/index.html parlatype-1.5.4/libparlatype/tests/data/0000755000175000017500000000000013204324053015262 500000000000000parlatype-1.5.4/libparlatype/tests/data/README0000644000175000017500000000121513176574165016104 00000000000000Test Data Files: test1.ogg, test1.mp3 Audio, mono, 10 sec clipped at position 4:02 Downloaded from: https://audio-video.gnu.org/audio/2014-12-29--rms--freedom-in-your-computer-and-in-the-net--opus.ogg By: Richard Stallman, speech held in Hamburg at the 31st Chaos Communication Congress on Dec 29, 2014 License: Creative Commons Attribution-NoDerivatives 4.0 International (CC BY-ND 4.0) License URL: https://creativecommons.org/licenses/by-nd/4.0/ I understand an excerpt (clip) is not a violation of the ND-clause and it can be distributed in different file formats: https://creativecommons.org/faq/#When_is_my_use_considered_an_adaptation.3F parlatype-1.5.4/libparlatype/tests/data/test1.ogg0000644000175000017500000027707213176574165017002 00000000000000OggSa4wvorbiswOggSar4t?vorbis/Xiph.Org libVorbis I 20140122 (Turpakäräjiin)vorbis)BCV1L ŀАU`$)fI)(yHI)0c1c1c 4d( Ij9g'r9iN8 Q9 &cnkn)% Y@H!RH!b!b!r!r * 2 L2餓N:騣:(B -JL1Vc]|s9s9s BCV BdB!R)r 2ȀАU GI˱$O,Q53ESTMUUUUu]Wvevuv}Y[}Y[؅]aaaa}}} 4d #9)"9d ")Ifjihm˲,˲ iiiiiiifYeYeYeYeYeYeYeYeYeYeYeYeY@h*@@qq$ER$r, Y@R,r4Gs4s=v]$Vf)Ϛ!\&7\VWoL)C퍕:tej4ud)M `ZSu|8ɏ Uij[]IK,n9=@:/<ӫknҘqPvLsIA :,p2BY;?1INZI6LcCSBuw-4dkf[+P*SV#Eb`k0Z2?dmЅw(7֭s%wS$o4K婀6zQfޭ l n ʖL8'Dkyf 4)4$EimYH~T5$w|ZVu!=8G49 ȧRA[ش̅wKo7DT5uV5yqاǮ7,ؚעY&ַ99o"ZÿoRQ1Oݩ;N+%K>|מd9(m|Huh/YWfja+9o]KFD9}<￤e zR]s=;.ιu`zR, ,9^hyAA/gܸbܦ:O;eJ|9iw-Pr:ܔ :ߑ._S'Kh曛z$9[؞ƈ/x]`EWST I$L9gH.PXFg M Q+ }Y V49 aQw5áW?9ln5wImhd^$9Kx ۽msO-}n x ^U6D9R+mےXМX 2UR]l*r卝W49!bNGnH.fR ^LMN&q~j|*|G:q 49_ b[>H^K>]Vg7r +}QkDs+[uNo?#L, `*)"1o3xѥ9gsǛl83bZ}9sNu\Ug_/{%ʟ}Cip jE!nrYOn_jM &pоzku-GbG%|~>,E/oxמ:+@U%HYs>{Wн|Lm-̍ܰK= :8ҫfBTa;/lwPnXbuW ¿/ڰG3ַ-hyUP {CNv#TLe_[tz;q=?OAmlKQ@'ŕjjH-{R{P}"$f)e(!εј>GZ%J[ԧһZl:uWibWDp'ԝoȅDNIbٻ%=$2㠿(.}9AnIbho?<\V-:I]0WD`9 `۾CjI+ ZqlX!9֕Zs !8k!vIFeg9y}! ?*8~M?^IV!R{-9: dp*5,@<= G<[z=l&vU/CsǶ Jo'-7co>Ч,;Ϯnݰ,98Ny-Km*-/vŴmo[ R;ӀaV+7~y1#y_ۼ<WM<R,j#p#|"u׾ ̠La+&~ < bvJD.A̓|/FxmzpO+]5/BGwOA ;5,8*aF^ܨQ2l;l1OLN+[`sv68ѿdj:ͽyWS: -L;m' OëX%,"=eUMRp' (*cμϥ3|Ytw6G%W0N(\IQْ"H[P0ZLҘη1aqVK'6Xܠ#ˎHy`z0kSB:_POzZg\_\~IGTvÇ||tNsL ;].FsMoٽ;[z^(Ѥy6.[n^2iR{0ߌr|6:qhh^_Mt755mskf1ϋ Mg/SF㫣eNjb:O>鵲eg#U~O|d:7!0$fX*dAvKxb:'>jBWJ:h4{2~!a|NcgL>Gz mᲝ󊔙Z{"K7[ͥ&D&g:5=쒨u*UkUI%97 L5Mۓ)aUw,!YGpY5i 4L:ϔjr*KJXAx_I>!Nؗ[prpݺYBRT:nLb^xM3BmRLQQ1`4-&>Fh_:Ig{~bƸ*M dkVj~)%$׵n` +*|=Vx1 #^s0vb<m b4oth5HA6O=üU@M$ 3<*߇nDYdoYCJ'A?lڲ~'Ci:ĜHX#Ul1EP^y*`5fm<>&2vpij8ʬm.ۆ{j;()_VD+Y̫@LA*x`0sISԍlh&LfϬ&Òk}jFy?fw5;KB?1 OggSar@3%####$''=||h~OB\[ 1`b0P7&GC=/ʼnhX A,PdeؾL/B('9:B Y#+7 ˂Y_)jz@5Bi>Kb6$iZK8.S(Չ~[ipc".˱TØU\|,sg Ihɷ,omVI]lj]6;>KեC*6ZEjp!zSѓQ ǭ~z9T )= *?.?="^ԣde*cK֗ʆ lzΕD^ҁG0<c{ےe/Ms~hݹ:nn*@N-d4N06ah$ڐnq9U҆)jB,bïҩb!;V-da7c'eJ/B1EAx#Sv&' ŚކȊ$"1m0ᶌ$뇷=oǞ~N=62/W 2nڮh e7 G(.K6v%Y@ CsY&#* ؚpaIqc.~?F  ԣ ǯ <Oc?WW=I{%oyBQx4<6'ZeY6]/my8cItcT =5⺺e0YI_|*ٚE) B4I:ϬvOX. &ȕS:PEQ19|?Jc{3>VCsr+pqBst[n MPJV  \UH̕߈,6騷"Z#? (覠A06X Evo 5c0 jrL&gy^6/OVR$qנ9W"j Ъ(0>q-gp ͛LlM@D~L#W1 ib=K] jøK<3p :Y"S>\~8R ԛvGP ^ocNh- ~?@zzԂa_U۲Ƚ- [8sU 3  WqRj]_>C!&[\ım--y: [mhQ|I/*64DS8`MjG݈tUTLP~< sB'eUJL清Cɒiڻl!IJbB+C*t'ʳn[0j"sŽ@W\#tA]8Lہ]kLU.u߽R >.96ɥW53y)恔ʼ> HI}?bކ$,s&#㹂Nrm@?yd<;|wmSn7VcH.v~Vk1!C0g_QpY9&}[gA7 (YpTw9Y0࣎?H Q#GhjzST8y'!InEO=ކ$1N܎tþU$@bcux?oSR2-Ϛ&)&. xoD dT`6L}y1Ua9TI@?Ρ[еhYBjLSQ -}Esm98-Z_wmk?HtA!|8jg,Sˏ^ʬLv:9Џ[ M9O|@pS_re+<䱲>|gRF1]o;LpZ4oz;f]žܠ\34_7"zxC(r7:}_K֗=u=!|~|%]/Mx*e wߕOmrަYe8Z}Pz8*}!ʳ4N}Z;$ou?GEA`GhPe;gǰ { kʫA4CNW4Z0'% cxe\:ɝs&: mxK7goq6u>ykz  һB:QE֚ֈq|~a줴)ߑ-*JKU@/Z Ca߼1eDBE']9{ A9# )hnRCH,:pz3o#˗Z^ij~tèx/wu@\P-Ɗ5 G&KPV;P="`r3|։`_+?1,:u=~Zm5D,-ˢ'|A!2eߌ.=唯r0حʉM 2l\}ǵnauVٮ-o;C3*xu54.`!ڙAXٮV9TnPAlB0E'UpZk2OggS a`-+*+&&''&(--..'&&&%&).-(+/.e߶`|ad:u*gp}CG/bYj5y5 1Q(x%i+Y0,#ᰍ'ېj&F$<}j ̕|+~Q1GNWxwF<7ݿk|+ř4 >MV3k69t/M1}řCխDExsٖ Oۧr Ј`}T`'ҕH0d`ݸ-?xQz2}S|9X%L7@ֱ9d7SZfg{+-Z>\*rwO'ff-!W Ln~^JIIM߆fL>F>y1b$[*:Z?UL540='\V= 4   xVkk((3лDr"gR{1:#v N!O,?ɷ R8nx^ U{>KF_i; 31Zzzyb8i|20ա idȌ -(u{a{U0,2ج),Ќ=墨~hП*W$V9׮>X׺[ˁ ; ?xj ?U$;-ϱIz#v e:PbHG+t`ҕ8Z:YxSdҶT 7d߉5m{* c @|}Vv^{pzgi, s䔥Rc|"#&`@93:ٸ etI T*E?,gK lXaOj?/I#VQTjjzW)}THJW+T8MvS&g~֗eMxC hTUQNˌF|ߢcdϹi2rگb(PI;jz]{]WvGW@U*B|rd- N |=|}$x7 vi߉{YSK5/2Ӭ,g  JؚZHUA>z.a7򓊜Px cq7I[S3~RhejS!,8؁<;jj'r4TC}@ߖL{'Pvu@!͝kWfmHaˮoK0.ψU^9%lq~wNA۽* @x0ܵ.aC7ׇP#y2fs2w=3 v 8C#J#'vdy"ʤHNƑQ=T Ľb; 6I.\w\6]a#>]8W4[6iOL #.~;?cRqGlO̗g.!! |h'f,) q!E( OK:Uu(Jb'/ZMQ^,hNkjifoc~ڥA~[nՅv{ć?22ᘤ:[N$ ^4EVT t*׍rG[S +j+^ɱ[Z3"JĹk& l{4#')D7;^TkT8{>ys=}}3Uޒ[PU @4q*kSK]Mk+d:jVST W%J/="aBT bs PlӚ8Eݻk< hD1C[(-)9J]s6#\#"G!ީ4&Q~-ȫ}|e+]U~ 당>S_"Vd/ʨALg,W|+)]u3idl?T/DKu|m5bwhZ#ofJ6 0wv} go>6K369R:+v0g=r@Zb|ư$j8qexQiƬ[ ݹYlyM'F#1\y_y[J -sĮLtor m&Ff0 3cXD>qdS'S Q۪1!E~FwDD:)i sl+(#rfʰyO:4:dlj֬04k]`<_:uIhRU|s}o1>$6ȯ񖌅a wu+I2|}ڙh= &P 7Ӥ8D[ش;O2u]{fU:uͩyS :ƍ=΁$r(r}": 8tg{wN)? $^iUOXTh+xo弉+?Il_@̖EFAÿaS6˓т+-/7КƶfR rm 츍Em ~3SdN:Oy?_$zKg(?J@jcI_fZ%okM *Ռ>DbuG>@ N5äHrG?h\t[8@Fz'm#wBzc]4{[:.g+gU^ tqRkGgP̨vnIv!|9*r9"*OKfkFhۃ{=2?I8˟슰~s>9wR%3 xt ȭx7{uɭ|N^hWr|]3_7/J7㲺e+x(U΄ERVXU$ՏlVjs=i>W -4g3 3ٺ"7&\ =~Hԡ

8?8_b:hxU9Sğ7|Ϳ@Tr85i݂`󇲋 AIN5\9y2 Gy-tHrȮzM1€{#&ϻ ,)%5|8Go10kb^fOxy<;]9R=+gf:6R=7$` 8|+8gPvQQ KrRj, ,"];/OggS[am&6%%%#&#(,-'''(,+)++-*,---,)./.,0.(+/0(..>]qZ;ܟ3$ #.Hs32zds>| ՈD٘9\)|!2F '\Pk帷jͶ~7_v@?< ^h%k(!~eqxn p)Cn*/]%l1%z{9mYS3y3ni24RpŚ¨]Rx 1ʙ%Rkp :&%]^Sȕy:bmROWsbAd?!tA&]؏@Uhk1VU᪙IJܥ߸wCiO4@I "L7jb?Q^2ϓ{%!AIw˾yeP߯u M揻4Z(Yf4%il Tp(}X\F\ h|+6;Tcрmw-:K RG4Uu"zVfw5zaDzmy̾{ _ui{cЪ^^߲6O,ל1?a$]3[>bc>B S 7ՊDKTe ՚bd>XI&O@ZAl,\;hfֽ;*XѸ^阬V&zN?=Kz9,lS5XsBykvU5 *8Iaſ r̸NU<mNTg>Ϫzozʥ`>'"΢'l9ո#'ނ;2ƀQ(݊9U/8i9|C+1 #5,K[1/&S\|9hɳQ\ϸ VI qw_ V1:4~ͣ\?VO A3-J\YlV-EĶ[T A8j,s|.ֺB;4f-wL `"V&clm~3J$RKqoNif@' FDjPQ1sPd#Psw~9(Ddٗ}xneZMa*9;g$WC9Uʚ*[+3 gq|=QC'fWYʀݩW9:!L&5J=+):H|֓E;|^YϾm*{#1[y$+8u0G{h8;Z47l^-(6ۍ)# s~+2gnDk!~Ot ݸG4CTQ<ՉGͧ|^P"k6DygLYy{@(dmi[=Ӌ+ٴ Hf]ҭBJ@Oyu޷9Dz]g-y.zSr?.dt'-\kesSW]`* P)T[JK+zv:|t`"\G7'̀zyz1|O~) ʁڑ_~TNG;>v ҽCj8edҁ:}dӦ8DVV<="*(.' e%kqa[s~2? 2J}1HiL]xq0+㭵F 4ݏ vP"/c ĤkDi TIj,1ky%=7Ҷ&oj n-&a[zC=A2չ 0;ēkyWS̤tkqV+#7hI46E62AjRSхbJQ:~ @,lWϚ ,nj?0 !:aBȔa"bS N,t(`1IH?\ǚㅌ R g.[p,ai }Xu9U@&3@a|q.o ^qMHա>G 4 px3ݗK"6%&y)h &fWNIXmwXut#X;@jQh~MH4klo+ҕt}6(eSLv98QKt(j> 湢 Ô[h{]~ \٣ mDLNa0iUK9C/TYľW4GQF:9椻Kk@EUHD]jek y½/JD3?ޓǕH|kiLX`}~ Yܟm˾+NC@U4S _i=6~γ 'DJ5̖GR0k]4>q>W]ڊhK 3QT}ujIVٟ(UTc4z:.߷FVrUڿW]qa *\cHhz̊>bwͫy=CiYDjk?9WTd/jZ.ɕ%ʧ#lf=4OV-5NOx*:>M< Ԛ&qP_Zؔs}ۥ3ZoNz2I4tB@@zGnڲ\M?4VK&|z]_?b P͡/'5=mvPvhܚq4 9*b_~29k۬5Oef4[HAכ8}G{a!Lku[T yE\)oVwBh% +w:CT~d?Fay%`dHtް+[]'|/gӒoĞ`V/;}1P m<3S2H޵? atk0pt$(g4"}-K¾_'$*vc}$7@'1&jU {,|yÉ\ Ěe؛~pbCs#R >?_mokiY>S|yS M~b к?m[8RuBWc=09tbOkr(SBh^Lv2'rF?t5PTc\=2xzRπ'b˞٬&(qƐ7~Eg@vcy fpvh#H28E ] X74&^o 8@ܤh4Q;(m2%T3)KE!\itv?_H*ۺTjh$ps +6K5w|ωh@H LukBefc\γKjj A TvY Ώ-6Hp0hCKSFU-eLnA,R2oޜJ$^P;ra6sv}sg`C(4JJë9}KGF[Qr%l^8?Ff) Ç-4&5F4)ZDj1IbmnS\RĻ0jN|!ʢP$rNZ#k7e*)8rHg'W~ ƃ0I`*>'l ʺoWCrX^1^"er4+Et OsZZKgl0F z 'YkS9_dM}}79xmri}gAdo{ hkG:R-+ q+wC*5d ܸuMXP w:b|şMTu\ˊvZ.O ~/_ކLJcH"?Ms  9 `|53M<04ԫrz ,U9_'! tgSOQlffe5Յ$N~L>Y)9DOB%ղu%E/FUd\~J˩D*Qx JI7g?0fH"x`8so.g/"*BBJiL2<痮nϝ$I3]i;~:`0Cb;pgK$Qn@En|OnU`rs%6h %P?%#'Pm6a쌵͠K?l1|"be]Z[$e^bNTK -?]8W҆BQRgk m8٠W[d\sZ :9s&oHãD %89_>)MU>TjV @RA~4YGZyL#mrEb#[L?i)hHՊG%t(Ư_H;M> 7 1Sn}VV6?d`<߳-dXv^\19;r= *GM綰9|"̒8?{@pj;Οߌ~Mo*2r"p}/rv7K"in9xV a?xWxإTq#CרArY.gh^kG|]IFw(zsIz KXUQKyo&9Sl3qD bNn(}$P33[2sm밊-qTT!W$2z4!e.f2 tޑEwEnbja]%\&8rR˽3ô:^ Hz͖zfzlW|%1e^>жw?Gl'z]{n~DOg %Z~d;f:0bDRv1o4 D}k36W16ZYVa .Iek p&M0 GMc2D5RخaK==(.:'4ݶh93ôSjrA6)A2e+":·=d՘i{VITZ3g ū2%L&ֺ[_ZњU10B7~fb^ zOMJhH@ؾbuKdeڬڜ7ktջ79c-w}X)fFx8^u@NQ?%>rʴ43W_?Jt86xQfd,}>ϲ+̠%K8L})@U214?Xdo秮={,,La/Y 8?E/P+k 9T z 2۹ta yhKEXMD"-o{svh| Kb~~,]*N"@T29t>n̗=)oeUA0Ҳ_P }_W;lz.M|xa \¡_CBy(M^}^ItB.bDn|_2t33N]D  3i#ヮOtT>d'`7>hSͪ uU=CQJe: 1Sy95?Ԗ=THJb2I=b(BeUu=}"sav*eFZ;F ϲ(*oo_vÙ-;r)jz!P?^Mwe֍ɺMEz4rLRɰk'A25WEkNW;1בwT;_*ʢ6.g3'Lv6Kj3Pm턻"[jeDR@9geJ6*5i} 6.k_FśŖChWJ-d[|u؇g_BG<mhLV^OZ(`11 <m#b7o~##5Nq37.h[|ntV;xoR ?1Zns{rlenh?\V4Xo Z {ϻ=LOغK^ A8Ԋ 7[R4O`TхPu^q ?~ɞ)h*H*8QDPo*uH/B[h-|zO~zc}`Nv~j9)N)8OggS@ay'+-+/-,,+.*.-+,%%.*(),ķƶ°1/UT yu$227!̆~=lم|\+::ǒ6j:!cʛ`Ԓps)>2XsmoFU^EUs< cୁ4 ';u s)E׭Y}cles'aQ~-+`ř1ͼ Yv7_-s RJ}5RTX#{3Bf[Wh?6{pB VOujR~?24Q0Lx)*E y9ow.zp/PjJ_knZjZ2AbR?gz%1J"M;7@UEݙ$܄nb_PuDN0K+~K0X.ZRelt4L"MEM"R-ʸGVvIpF:z?8ȓτ~|"zt@ /@VHdclqv?]~4I{+mlxl\Ԗxa@"GugV/bgpJb%K+(>~x9>sXK.L<-]+,@yη*B jKGGX(4~19'pc$~}hD8oH_ dbܺ_GVy=+>LW>`0%jb"hkx+2r;BW!Pz;"y_6IֳRj4}ǧ=hqRuls~9KtfcSKr^w>Hl7=c^1܄u&ǟǽ-zc)~2@ܸXrE%2ow#UxJEJS 2{G0 $r"PǔP>dlgϾ4Zhaio\mI8["wΌwML`f!^20>G{ʔqZ^DnϺiqkko5L6pp n4\mlw>yl.㱔^/2{)j4E|"KQJwt׆;ƒG7TJ Aa4G6gr^c.&+zi3Կ J^Y, yR2&po\;X:11G%vQuR(w+Z1dǷar7 Lj.ġʼY_3j|tvhDGY$CfF';_<ӷg 5#\J֠3 Æ(i3aXϋXdeVS08HYb;_ڱ Vs2M죴# @I@=SiNwd'+%~;9@qM:}`IŢVYQLjWOzO ToNdmT8<%X5''1l9{U(wXXYlQUbվBOxA*ln ȍvOƴ-mIOΎ7wg;OSmfAW!j#*)zt3ü0Hj>%;iK>n *qAb/ k[mz)e,e.gvcHvsolYeq#UV \æs;o-jPg\| Eu_e X$S̃+8b}02#DYpVGh+u%3zE]71ܳ9dMi˩}Eh1H+XX4q~3 nkUY YnMI5K\q܆LninBӡ鐯 Ъ+Ƶ) 06r׮ɉ)! UDDN XzaPN;0* $捊{LwN/T8y}Engp!_W^o_^iFLfnЫ=ۏ?d쫘tةh@|PrGԀ.fa]&=fmSn+eJֆnu.ahdt:wTiY֜C‡QQT`̹$׊)k.کS' 'y |9w1nO"sH8#'Mmb97 1.D]@D~b79S+$;q qͮ;8$ OT3m^iUokY'ja$6[|8/ ތ B"S\oq7t5u\;-FRṬXzv4xP@jUK``m}X5n]]`j{tGȷ.k^`unƣuk-j^iV Z5>?>w=<>oSW[@yf<~llnesrsƔj6~pmuf ޷:F#|,ÀJi'lxI9! 'iK," LLO' &gz|5 g7wr+]?՜#O#n3" peU]`gE: &yg`w:+{?DA _ nb{k4dհ(W$)$Z ֘<\✅)_Y$m'J+;Eb=w>(K۱֫ 3+8L2~~M` X|1 W2wZC#J\E;TOggSPa=mlĺ%+,+,*/)--2eVI:ųɏ}v؏j r 9YA7IK@&YA 8[}^HHn[کy8rͰ%ܹLKm)2%8ʍ0o1UɋCk70h;*m6 Ĥ`sAh|B]둘!8fڜO+ۼMA՘di)a4#=~\2u8"jru*Ebc׵w칮t~lK+;l ԧ^N3(G$:QWW$4PLӜ%F/ՋveΨ~#B]` 7XH%$x>9jhy!zgtч*PZ70ˬ`ԈbjQځ9 _nQ:p|h?ixv0x>5U4&KyPV962ӻs9 쿇4M [U%uKy5 |,|vL9* `M&OH*W7-#,I2CIF>|on-+@9҃{6UOzzftQx_%@>ڽfsUO0SiFDQ6TC׎ F, |:ف;.ͩ%{]+e̞CĹyP܈?0C@+J0 LC %o RW&K;EؕL,%3 tkޓtfWPB~Y6 +p~M,V EW_ȁi}zc_u2pEW8y{`\h4lHZ *1A(|XЮ]^G= s:EK`$l W ?co=!Sć&Q5_(xv ]vV8# ƹE]ouW(Q7p (\FĀE`>b C n A`?㠒ׄol Ae[,ڻâ>эM:5ׅn~u{!t-P3&KIGh=B%ݸHr*YKFHCņOE'6PWgZc$S x>T*^p1 WzL޾ ?'+G;:cq@}@J{wLD_#T3e`ϳEX~= ՘Z5Ko *4sZpk3g߇G3yCj3rwR[*־~u;2L0`~b_W9pVu@7'y iNŜ9W]2ۮam"I$5x*Ĥ_ M(2&|/oVܖG]׆:ٛ=+NLKK}GI~B B<Z9JzK{uwLNiL>(ZAD+1ie*8Jĭ{P$\2}pq)[_Xy%1%-e/Y\k;:ve'˕Ӫ)u[e!ƈ1Sp޾G:!:xV"HeY,|.bzePK,SqPh忺wn$>) 46zŐ@XX,9>+gKtoKxx)i:9>?"ed=wÞ m ௥ړNaif"!¶0# K4^~gKof@%Yv6$IO}V4eb]J;IG\$I$GZZV mW$o?l 0'u QȓkI1OM 16Mb)(?2PGm$W?2L ; 1VHd=wۛ{fDEhxM=>1uE!eA -gjzHIJ: yO ~w\ZH)Im~y{.V"r/UjU+,j6~R5 9|_I%1Xk"n?!!ׅaj Qv'ٮW$3@2uR-ɪ[%K{ |" V#r?aJ%^ᇿ%>N(xJ5?זUZcR[a1Mxԕu؃%l`j!݉q1@lK/PNhSK}Qsns喺ͼS@'|DG1/ 5%$oGyLAEÈ׊dюXx~U(%Q%KJM59|TIdK3aT}j4 ]7bEydg񦄑~وУ` l~Mj?|xd:`2+H_qjL*GOqgfwB邆6] rT+%~aV}x?Ed߻~Вك:4 ~pf'͗ #T _x{w=5s)?.ݶf,ن` yƖ`M ق=bMJ'MbEYu0Z,V V%=/?@Xְ$XqàA*HÓ5%:-M\ &uНT;sj&%[ " :eϛ]WIB73+FBs4;øs>/iba1r!L8~cf0ma^ Ezl4岓_>iGЉh1WHc37dsu@(52EcSc?E-p;g`w L׊y~#]>j3^]Ŷ>nW1Lԝ_rOv׋ (^^'=xˉGjAHgO(xMܮo9mMzoG?^6r:@X$?,>{uTw!eHn{x,w͂|khgVD*hhs$ƆhFvO5G5>vǓ}u) iS#-ĭse%^g gȥ,Et(yf-oɄis`H>2!ˋ/ᷣkެ^VcAD-Ԍk0˩3ٜr>N; bZus=u.C' -PV´Qe@򤲹ʦZqlY=*N̥tԘqǣFxٮR(Rmf'wcTBhMH8s!b؆dY@V#c04UK&)1ժj\?,5P_nǞKv1>XH^ ySi7,xPB8}3'`ͭpѐ3^FK%j{(~KXƄZZ^X4E u*ވ\POv!ukmh3y79= 9m޸ۍdB]J@C1!~hBc(yF`h%&$9+'#d@GQ˷/϶$굤aĐcE"ڍVtK.TzRUFSND&'?Az24g{=forKZlAA&s.HsV߱c5uc'}FiQ׀$0|{JhFt@Ŵ<}d;4c K 6,Lj耭%p$u^ՍU0[]` dwA{#1z5oz溌IN>- u:|8Sx&%xJSJ2KVBc湌)mNRӃ΁C9#WNcXiHsrB7TǴSg=#:aB$l?P-pkn; )0i6(:5@;My#@R(.<^IYӑ|J<0 y( gqϕ:J6̳(VR,Qv"'4'fK)ҪX-`dxҠzzx:o>+rPP^?ٿx'EyO@V&'%;3Հ]5W^iEĘX: 쏜ܤgK\w5\rͨf>N3P^l. EL6mi.KBt7 wa$E3~.5Kc+е#Hh6hߪuk n%gDHC%wjۧч]ogK('Q^; =E z<: > _,i\P` p1m^yR&A-\;#VŖw9wu) Mﭙ`R ã"K ۶qvnt%=1v1s#",xE0 5q%EYPĊn^ANz}[{[;&sQ G(]>Yr 8|lwI%~\fG3orރ& F3o9"`aCU'øLL_~R6.I'5ߦJwO %’Eq;/H)!aíRO"ބ*1WtLHt8@͏nB=) }#lJ1 ` q-z䮆jbOx{jڑnjg$GjWj`l4\5lںܒ}@R_ټŁ㌰Zi/y8/^|)\W'WrwU?T= d͋gNBkBNViP}K P:;t?T2jHWLDLKz9B6ʉDԲƇͻxA?Y~d> I췽S.ٹIe V]xY%%el_Nc[k:_uDQt'`AFF~,boxM/Zi6F*Q2Q{GVݴ23]GruaZ}9nvf{&'#X_LjD[jK V`䣩$y5v]Da XIxI2iH[$#(f7 QQ_OZdC\R.6$$PE/Vq|><OggSa 턍&$$$#%%+T\RG'_[•&^ P ł?e11|! Zp9u5>ƷWVfMY3+=ZR%iM+6n՜Ɠ^526nS^otS54ψսwޗN]s77~Y͹0FJvZ~e0._}x>yͷק#,uf OK;$th "-jF# V(^Eqr%WiU4C,{l[o̒KXscȷ?Jpk٨Hhc6uJX X͂=!Ev;W m`1a# aybӂt#ىK?E=օ#;ucl,[`QL! H$jÝWkbo>Zrk2l<Փ0g 7͜X~98bIji8vh>ZTFl߷Ƴ|M|S6 ł\GÊq|UƵl~ҭy]@XUH X].Ī'KѩkHc<\y*_Jى!w.<&5s_:ۓ(ha}hS]&ty/OZ iѾn#]!Wj­W]L_j)!xԏ̨.ZR}(,ahu":ړD}i}MNzp#Խ~Rv ɿеvNGI9z'fx0y>vyr\}u͞nGs вW&2~yEH7yGTn=őpel" /ģ m䦙b&K#[!~1 Y~ (CaigV$oav բWK ;@iv9 H aQTTk&5RTֹ(@ʩ6U^qމ%TJS?f[>~גJn貙ۘs!i{#̜(\Mj1WɭWoJP{]l+^!:QK"Kn!uP~8IR$\%([_°^bjE)ĨFtuxAn x͟è;BlEPB IU"Qu$[@UzjG U|$|(, luL @g#{$Lv$v,HX0i%Vgm~Υu}r];iQykB2c2E;ыiWm[-) U@ɊCwB^,—YX>ε2svEHgYKSWPsoS?I~.-Tʳ2` @KMEJiUuS3/G\uVIH81]_ =Oȓihoqn %4+AG,IVfMHD'q0u!PiOj;aiji{e 4$JH50IZlz͊)wۏ}MD9YvDvn5M=8uoppEPՇ[J2 J㉡v$rU8whcN"cvt96ilM@62ayR bo2oY;3z46ۑ:2*K*D *h>m6}2K}+5M p/1*ʌ3FL77#֐t)zxS"X5cW%ۯOi%zFa/ۢP~}%+NnQ^D v 3+Kp=`EѦ5rO&8?0 4iK 5Y[ϔASWDRu_rq?s 891ADYTJ1鴃JbU#3@wm@КZPCމ?lr >%``][E%qHz\ZO("W 4 'Z{sݖghxdNC6q?|ڹS:\rl]Q]HReja _dfI{? .  Yy꺮*{#[8i(ޓOggSTa P4*+-/,+-,-.(*,+,.-+-+*/.)1*%)+#%'"'**nq&/ONBlal*DZ9>!JuNbl H}sýsuca=:EWJĆFCV}?5 nM)X^Tu5pc Z>vĂћ2Ѐ]F6@'uKӹԝyna{l!oQ)w~YӞgSG%Pjw V@/@`s]R'x0 ԖuC#?:R یxt*XR֑ML7ch?ΣH=&+8cU]7}E1j?7|}hKz"{d XDw͌'ao!2_Ԋ=pL='#ɥxJrĽA4/Vzu/Zu Zg(~DݖMN{[ĸmu"{E/+`cdP])#DSt=H,_Ѭ\_Cw?.ވܞ;[+EsW 9ֺh׏U?ܖ]k~Q:$buX2٦,vV049Z؈S4A-m_G{|~L/2s)hKo6?0ex_~ZdŽcWU&Pqp/Jъkћnm_i@N G5H/@V>It~u!(} <#SدXPUhBO?R{P;U>~e}7f}oȵ] (F-8n[) 'ނHkgM z Z Fl/4֗r>F%`k=`9t<ھ0gF'VgRniZhNʩɄi:z*œ;zY72}&t$-趼/z5cSPqXZxj ˦T]Լ!ZFԺ@OĆ$m#CִU Z~GqA0P,\r&=F|dUY9HSLye# fcze3һ ? Xt҃`%l\QZZ[Tb8u_%k<{ɹK?-\eZĔ\}ѳ;2>^o<0)9H‚J8Ӱ7\͜}æUb?7"?.,h NdSo;=!d*+!* ~wleU}ܓ*I[JZnlzE98{G.bNW_+K/3-~J+ͱ`LYϺX*Q"(/l R3-Fϸ̦e+5鴳gI"8 j|-aZOg 8'~ٌd7ћ5 MY_[Tgz~i%$DȒ~d٬LIC~qI]VA凢c oxwRw'} 5@I9[07}=Ba~9QW(vQ<z|~*Nn)gqQBmܓo;-h+3Cx3md6,t~Q5@6 TåUMM@O,><|vuZ7O!BSx=HN Y /:Ufw?8F*B+߯ *ș9V `b94(7,($:]^?X>ۦǀ!Y!!=5U\*V%boiH'~N 6m%\-<1eYͮ4qjCAwH ns"hZXmZĞVzI}JKƍ=H8%CT;c{JV݇(NןO WZh2N+Ɔ`ZezĂMx (t5K:5PaS-0+vNؑjH udV&Ω 8aepX~{ELj|I1h Ud2wEjmʧ+hYf_UHI;a<^,W#$4$$e\=ek|/@,_m me3{q'Z ,^ZAr, h:|\6ƾ8 Db_y#Lß_u5pW; ?G疳f5B>qKg+gZɒȮgI:COD& (y4G/YC_Agj`5PAc>UK|A |-d) aAETVW&-GU[ eM-(LN+m*f؁,")Ou~uz8vA*^l<>Z KH냇{Z LɾO P$p@^V9^L7ˎ |̽ h傔&z<^й t\"1՛~̌Ѩ@[xNU..*նORo}8 ޠ&T?z#:" N Ri 2;S[|iJИTh5nZC"ű Xzy ~qpUK>b=^:]qyF v=s \Ar2mGnmd-|II$&[]M+<&L{ﰦl~#GӋô G5fMb1@¼I|0&!~#^&_QYQ|),Lt@ TTSP ҟwe6Cxh|U pk/Ajŭ&ݯFv#JIH^vS' ~4DH ޭ-OTJHTg`X X;TVϰB2YS)t@>&m|q`RL? _X-O'y$2SfӐ&. >a:9Km ӫ=wy)]uоYۍ}ySkU0T]H2=ĽY\I{8 ?<,g>44@m8J E\li^Rӌרߓuֹ򜿱*K tQ|Yms޿5Ϻju3o4 5 U& p7S5bSR@7ۄ-[ 7#9Ѩ1,bfFq?YOggSa $*+))-IȼXoR6܇ Er\e4Ѯrx8K"\w',¸"'W[0s(DzaӇ}sgiMPQFdG?-HePȎ?ȣ{]KKz~k-[q=q[ľ3fE`<'i+ƒh IֆaΒ27-郝aL+eWIw+Y0.Z{- 1kzTn.\> EJ\#|91KUaSVj +Sk[;{ώi7Te ~r'PXU1am%Q2?ZnnhS%N-kkgZ3_2≀lkk|Y׃Fz{I#&'!>8b*uQ8Ph=3Tnbwq/kA3(/ 9ֿK} D?YWg3֏zS-@$7>$-tN}Pruy},)^ @AUt㖐YYW $.XFNlQՍOSӱ:To~!D42|yLL4ttl5"3i8H -i*f́ {U SiOʈ܌E>] E) W$.5Kf&umPsrrmOLCXKvhtS&Pg+^+oOj?2,ԃr:`|7@>di5U,zQAŰ'^1,pp]omG PMʵ}6#TM %vq)TĒx;2~GH%ߌ/(%UPEV(8[kE!ΐ`fr@IPÖ?7ֻܿeH$ }mQx @ǸP4>V&STp?/"Φɓ%ِKը)h% GZMNo X%ʞ<5 қ滋ւ y=z~ԀjhK/@7f+3p'WJGFW>Jט#*-~aD6 @oˇRRYC9NɍA|FTD 3ڮ \̘c~4vf<%v;XQp \ˤWtgZ!-p͏uho]Yi`*,+iVW-}v;8iA䪨#Z/FVUQ#=0GmLFTxXs1ikRp_7 yUxOhZY ,X<Bqu*;CyIY,?Jxm[Ot:&-TĹ l,NټF"O ~ѿ/_hPcY krnoɉ@Wa7,` #]y傟Cs`Oj#i[0Ys6 ˮ>5s*T٧7gPK$ ,T#F%ZNLľ))EgSl4M &Lhk5ruȧ<#,ѯ# ,w+Z`6AC)P .LWXՑV8n#ش䬘\b~4L |a?((tɫ" 陿:.%?Q_<.wsL F+tΦ`vKkvRj`3>|WgtPa?fJ31QBCm!Ĵu`EHU.}&n0KC٦}q!$}\ߏi^SiHf+13< Z C'*otyr}U\^뼌-TH pk7Z43߷'{mX@1*t%{mYŷ:<k_TeJ..rޑaTTH M7Pz >]X>D^X-hwٲDv}d%OLa.Pt԰X H ~4t]3a_׌M$UnH@_b N۾ %/!BfRG7]0RG{y8ۣeD.%K@"gZJUфۮ_  sK[' qkΌ:+Pʮs ~N㉴3Bޜq :&qX}l \`r!7x6@ *WDI̷TRZS.A Y6pהk dcT3{A msɡ v"/6JILIkXQLBm XןdRtYތKQtBʸ3Xw#uP&m~?*H6GtH}[= mɨ^Pze4"j?$\Q}_y*ߪ,* p3<ɔa@m0*{dׄff JU޵3ͥ| W=/?P@P?_ Y,Cs0ܺ޹=q!W'nsRҫi1%@9G&:xi#b54*w_?9n0 %mbD%rilY2#VS-gR h"ږt).:T2P) 0*#1>J %$gU=ٯao瓯92K$p2uqy@&4,۩b1yy?hu!iZS }12_c |t=k`Y)ߓkg^(|{,3&wqJHdOggS a m3%+*)%*++%.,,,*,,-/%)/&)-.*/0'**&$%$鄒 M4%V1<n̖Śٛczĭ=z@s錝EQ]|_Гց^O*.u_7jYbߝ3[?*qm[?(|uFZ_gjq  kzATo;$)t"Yf7 pD's'.&;.ufڙ'oKp/k Sem'تἥDl nǗdnh oi.q P Tt5ûvKح yWNT3Ro? 9CrɌ$>{ۘq~H4b&7\N ud#G3@境qJƹsĵ3{)4xj)9* 0-foΠ9))-0_sڼۺԕıR Oek_ِ`RCk!lPTՙ[ԏb45=-FױᯢeϺtX/}*1>J[ h@&)Z}>jn/Iv@Ilw,HNg5Cܧû`ɽiM`6TWzO[aHec̍P|GdF2^J߭g^ϳYA9`:lϸMȆֹ$vۗ U"[mRdJ+Zv>69Ҟ*J4K_smL$8i蚂h֙AkXkx}>8e<=Tv 4iQ)y%T/0cFi| 98yATO [haj1?Pϯ ɥV-byd)=ǘ%@U(j<ѣqo76HFӉjcB-͉P~&6{k a>l3L|`֋DKo_QB 9&j,qg]RJG^66b}Y)I׹.~ sS7z85 @Ƅr+c>[>=lqMz(Ս߅ WQ I@du)F#wcط,Xc]Cܖea^Lj Aow?ېk*`J-?HvMjGoNl bZe\H$Qu5>vXsa4pLc"6b%gf =SFBn>e55Iu͍ 9#$~jfGDa͓*v5Atlpi80#=r`qpxͥh?ϧY f{um耤2o9ӻ)΄BvDj5fݬ)v>G4+m',{ ?Ӕj=iyalgިT@2ok$jZbC>bѯ*XF& Z?\kKJʯQtAY DEɖ+)Y/w'Ye(L`+|AXbBj HOTJ5or|XKK KGRkf]̟=iv\Z4er6=tw$)ӑ_׊Wv:=Rj7m?`EARH8-uRi4ѳ;?/WGj ,IRGZaP|k:/-jk\3wGj|`9%b/g⯏lbA'>6/P 0ߎb(g.hJvҷ5z2}U8="GFr q˟]h 7Cekc1lkV SM?q0F]v NZ:(E"׹aWͽ{g0|b ӞnUj?2em)*U "*Xˀc4DJ}+=\msKnr_~pR/}zAz}{YABu{E#{V"iUFx^ˀj+l ^5i i [}ߢ!e|ZYb?.4@p=O,n(99ѣ>v .fO 8TRw* /G WK5. vV"^]BxfuDz[y֜۵Gf=7k-?ё'$kr-\#)~: j{P>%iV -6ŋ]N`za;o )px~uשj1]'s1[2,:79o_0y H^A03Hyl99Kfy_\ %LOԟN`'"3:CnQF 6u/ͺ~(!]&: ķ};ݣZd;ueZpm9c:{>I0nΌqoQ]>ڴ}މ]=9K,-=^;~v/ٞPc=.i5,qKnLu=]; IA'?g'jl>\|Z+4pb8z狕{*q"c(^21*s'-\_J@Xqa1Up3)9A.0>?Eahl60>MLj}_p5rwCh뉠.v vpeo@ýz:r~8ͻ|&V I38%k<҃nw', X9*𶠻7"RΑ)'@SɜQI)o \=\_n#:JjsD/]F, .WARKƋL]nr?p ݸ&`|[P2rPP6]Hd;{43s-nt&ɵO[7eb9Bn#1:^Jr?s3}z&4G\l7PUρBqs.\.}+fDiMWo0T5pʰDg%^ (K.="it}@/~ 4oxS$܈$;ڿק]ܡZjӞREiBnG: ē2,F 5x/]X@_Ĕ 4'ben"} XgA-~)p׉o~`,LKutp1-{ݼ)x5?:*zd?7Fz>,*X'u'j?mCG7NFĒm+?埥yR""TBbM'-On~}=:#w 9)9QI)\%S~揬x5<؏C`R 蛰m80- y5%+6ݢ/W`Ex7ƕ64_>s+K U[_SX 3{{=.3b:H0FymV~fQ="iiw2g7CHS&D|APZ6Kr#1P=w^,ZҺu([r)RvFo&cG#UEuFZ9vb.wiaԺ;{3+)"fo3w/"Z@4.ݎIpO^37l1*uR>~ mTS>|˲ ӪVn]uއO?eSӭ]T k%`g4K~a)#iüx?g6$ I}).L!'A::zFZFbuΙ&9gDzIKϘ#9@ 3K K;-ˇMoI@mK#f]3N9ʏKs@d##֝p%:l*82RWۿ̺R+I7;8gq>OO :u׮ HLva~t=Jso90k{Wxye5ȆC'NNPp?Z@%X5&e,D4Us7M۩b,q(֕SC|j?VwڡrtZ(nAJ-BGU_J\eB|&|70s?,f>ה(USyprwwoRlsܖ8ʖXY`Jl6^cq_+s@L+BFlòq-5c.^E!/3Z<4li w\#UXݵmqVԶ3%l.vр9*o}%l? sY(FW%]O9I,%aa%FcI‚59wݷ|:. G ޚ=몮fV}9&lA\SK[!謻C ʕ9$8?Pf$נA6E)9h635kR2;55Ԉȇ{;(&m=#Ϧ0$OT ,6ҩW4W_w/^hY W8Qe &u3 \t a'Ǿ{FC&Ѳq ? +N{$2{vo8JB;I:ZjgsPj y;T@ u9ڦոWƄʘ)ׄ7/,TK此oNAOeo GOggSaA ,&&$$,0&*+-µ$$&'').)&$')++,()J釪Bg?0>ɓ5Е,„ݜ37ƙxSK_vq,u)P%KlHN@a(9KPuRņ5^(bqh;6?CЩ]FJ m!kŁbQ`idȷ%'ny1YȰUsOZgN=>^bVWjl(={ktNCnDI'}N Ah%μ?i~aU>vO7Tg-ހNtxgE^13/x{ܸ>N $'m X>'>r!ak4QFi} "S&٭]SԆ煝ҿA::9R*9狻)pPh- :D9uz4.,46%{+Z~O$x4혆w |2f0kLGBٶbƻvb{?y|H#ՑHb,iQfHC|5 Vʭsw=c]  L43B^4-BȲ Ro;z35-fv ]g*Gr5ex Zzii&:H0pY2ηI4 jY|h-~vm6i °czj MMG nzC5~_1\(Z#ʯ?G`u|uDž0D߮QW  <Hcz ܺV4ttFܔX Iv]^ƽ[z͏q$[P~9( d]e s7vg29_H5L]]i> SOUNvxdG6Ы)%~+Zitqv8^{XST }c.z6d V7F6E:gm"d#EӮwJllK,;G >iL`g)W8 5k ;X}K߹URk⪘vG lq* +#WK.cďnt`> nXˁgcuV+p w[wηٛ6t_UY7[}}byizhcEHf &;dنē)c] h}i݌n[Լ9 >ccSps'JYGG ܱ>}WnCgN-khsc鬓/yNt0IӦJc8;<7[g[ p{Lt#P|W.*\uDZ'n@k-LJHhŹֲ&if``B)&HuX E>ܝ=-񾧸ZG8)6͇ZU/vG}/eY)aƜmpk[i?>YpTR3,˙Q%9(<@싴su e??4gq3 :ubש?WFj`582M_3IR&j>CJ-HMZؾ k0^;J 1*"B$:u'Iحg AU(݄{ 9:öf'|2-V.9==HUQ缜Z}AO-Nf] : 4~N鰐jf*xfdrH7Q]59}і~@rD-e |)j]F tuOɱGyYU]UoGƊ}ၽ\8-ֹR +$?)2dx%T7=9RRNX`zaDW|冦cec,J;pZ\J_XDUhoᒍRU~d:;h&nYƱoݿ\C$OVZIK|Hx_u%{j)|BP\x=3psi}ygfQ*ߛwf.e+Rrh#N|v?h*-9(jxZC"Mwr'iu]13`G`هtȩmVKp|MA<{^:8`$6Y m;^rצ5MW< ,ZScbBH'Kn9v>55cRnCsNP ʦiw YT2h)S`X5i' 9~v&${nGϼ #-؊OhlChIV"J& d2Jnl[0H v˗V^T>*o,ͬvU. J{;3n'BliOB^4FƟ)`SS O9?Uf8,F5a~<%l߷M)jl`i| Wٮ:0}"qg4UwAз+t}7d'Pr!nZK1wdbO^S9tj]ޯ~4{ tV:b| Ee?3EJ/a_Y^Y=fAFta <"8dbb>OL)I HO <6v OlbU,_3U uX+鮟pX nyM( N 0Xjӫ*ܰL5$2,EtjMS|?$XI kdn9hOu[(n>4xY)q>y>ۋc/rzUtr2_7@S@8bTMW~F\{OggS ar.-4,/+0(*('/.1Il5ۏL|_lb%Yv nep̙rqW_Swj[u/0 p27N`/FBCإȚ:|զW1?yurw7,0\ 'oZڼBSc\^y%,[0VP4Vxf&it1WwnlOջኦ4#߿f dF96InoRݺO| uԋon1I0vY+kϽkkZW? 3u1DΙ24D$|_~Ď֬Mk?-QFJIi8V;Q'NmitDuܑb'3p |4}q? ]s/{Ȧ.'gwC"Ѻ$R[nN6&3w>T n?9&lGjMUEҠ@X[Y2_M~ϑwQ3,IU44ck JMwq(?~}5ɀf2 C:U[$먒q5H6i0-<,,n9EA6ËtRΉh>)+RH1rʏEL{bWG}%æ,Hv|QRMjq2)][ ;#}w⊖ԣEf=vz_arYݕ^Řqו <7.0V"2ݒSɵ1G?h܎LU^Bq;t5ؚ> :]*D}+4UEdz`ՏwQ+=J.cdK5ɰ`  a^\?*\G]K,$.~XYc#6ţqKHrfeco07Ε|elry&$tՄq~=%kۑgC|jk<1ATH 3]bԾ %ȳ7mc" . Y`'Ǝ5&1z}i#5Òbv/G͛"wCd[o ͕˵]n76'2I\o-'ej]HVw|gaVUx7Xж].6Cu5 lC 94o)>ܷ&Clm\Y9,>6A]Lx6mnhN"x1̋nZN4lyL3C3UK_RJHCD^&rp" 緖^$+/ ZZ$-2ǥoʭGT` "/ԾGNW)jpXrj\"T>M&vlΊ ԯ2j48ͳ2IX6Fa ?CYWL|*K{ƈ/a'թQѴLϏm~=+9_ փUُ+S$;C\H5\Œgxbز"=j*M|h8G@1an {\qmô5\Itc+@ KkFdĴbKā=sɁ+?w!B>ir=:>Lf((b@Y t Ml"tEOy9Owo0$Ģ#Hfzdy/֞U510O<'*z7C ^e134Op"i ;"X{no@>@({:6.W~>d`}z>Lt|tc0IȖHrR߉1WdɩF϶xLbݘ c[|p"N+~+ q1YZgDf`'0;uSl{- ^ă]_(*bq~W(0Ѓ.[ĘJN%^reG?gNLV M^kh/⒏*OC[nPدKZHʡ) ϫWLp'xxK@ LVfgzFR ^ $G6nhf 'ly`ID'?ci{SpSmWqW2Z9!ܚ[x ]Y*8l4m{ˠj3B1%OsH'&u@#m2. 4,6m ϳȫ22&MS9pJ.[ BgR OTz0K䒠 ?[k;#jLV"oRY%an #)$嗫޶m|혒03xTɜTGJf+ Y0I9wOY(@Zx61Rƽ56,bS sd(w:&U_i3u()9O:J|LJ"u1A%8 M=7S~xh\} ;ۋdgWq%Iw?)C5p7E&[\-|J9Iш`L V]}Yмbb|kȉ5dV (?R]q2ӁKUmOOLj2s)u>xƸ6PӾ65Vne32iD\6 &#;* e뽤8UIbIUKr"^oNڥZ3c`N]c*pg3{ޟ޻r6Q,\ &GM~yS_?Kf>W׻ի_FYRFf@ 7ȏnQ~CnMM#$cm^8vklXPf[VKPuc36K@kMYo`Yj>  hhF}zp>!(OggSdaLdiŽ%&'*+) KW;WggJ[I+g |ygkMfc敛_ǜơ h|Sj>nԲr _ A0aRBϳx]`v{RwfCv#N]r1͗3<-znktzxׂ]d࿊~Գw&~/ܥ P|$@^?a:a$|rx1~jN*yY2EYp,7ܟ.vV,=.1IDYlY0׫HN;j!)h  -XqOA9Z9 զmU7p056 KHuCEfu4r7χQ6ڻ=aUK=ϓB!`XD "q$,I^N;~H 9^k:^ p?@چ3\Aw3iٔ'auo/JG2(7Y-j+n/RY|kO8Q\ݮ{bŸ|[̾m 16&RjuɞުR#~`«RV ܂~e ;w}jҺx=6XAYy74f(`w |,%H"][pe}s8yʢ%Zf1Yﮛ䂐I'y88 S&_sZ }o SC#̆DD5¹Zux D'3ah0C|6J6#H*P{Qyʯ^H Կ4_|d4Sq ) οO^c E<]Gc*~UgAԾӢJ{Ƭσ+cUt+pNsAοϋa)R"k?E3lR=Ost?:]=f.냞bSI`0)Sp'I /yX[K{?ٱNߵvPtc-,qGP\/Fʱ3ʅ.%ͳL=GC Y|@,*Xy-)C%~I*61a~ߣrXh$@@%.wEif ~WzQ |Mb<ǎv`l5A}W.4=[Kh{|[y-v!L[CT"cX) ؎狰$1y. Hq( 8A8@{"Dwުއ595EF& *ɥ-U&a}:LDRWwc5dxBnfbv ǛJ #iѾ {jjGXZ!ڐ X[>@/D!?c،hw%7,*SF@CAN~P+U+;N@Iކ=T.ڏ3 4LK @}&mb.tw^㚶_N,8̌f3B|:$~0Лpݪw\!{'H] YчYjw4*:*xس#*r^I;աrfJBkT3G[#c&<֖&TjMoBփ7|schy{]f sJb@SBH> 6F$U 2"ς3{}  eM8N;%+C}rgmOaJt!Jxhj\Ș집37mJׯؤ]~ݒ3ʃ˨Y).1ZcS/w+GM t*?f*rz[=|GHWjFZK}$H  Sv~Iim;$>bBؗn6[jGgB${t5[i1cݚjt3 2NxeDR9esi̯ZEO&Ӓljst~S'pO]Jc#c<[h;Ȝ9ֻٰػQ^0=Ty a_" ek)#ކ(l!>uy[&瀱Ixaw!ݩKX]}nbύ2$_K 1k4j}Ȝ/q^CtJbx>p͋iTZ -MogTȦA$z~"7ڜup^$%q#h;\"0".[@$d"<: 뵞Kvl2&UyuڦϷ?<ۦIvEݿFk꧰iTL[go#Loq)YZ' {x`#l^m"wwZC_c7 4eIDo0 >ȵI?.P &y+2[rhOFZ*jA!qq?[@emk:/<3%5w~Mu1z)zdqMOR"i\bT:cseKx܅=ϑyq ;5ۻTnP$];Wdـc%$.:avy9#^iIo$ Ӗ[4IUi]ū?ϽjSqxʯ'W/]a0BuFLgG\X4)$gT&QTI5P-i 3Z挬z'\KFU-5a.ͲefVOl2?09QWA`_0>"Rx@[iU4 (ل;KXe]h*#mߴta5(E͛8/[Q ai]u˜f?k΋{{Z-_DOb0xD`6e|<54؏}#S-t)YhL&rЂZAm K˗צLw ެՋ|9+Wl?RKBsv^~]jɎ m#*F_.yUAqPry! _ƗR<T1hx0`w_w=OףXOaZ;p3.ǔS 9Ee{ Yۢ*[5]SESU]DHCc$eB8D3mF} VW&/yH HMMv9',;:3K9/BPC-,e+Et48 ,89œF++7 LkK^{~d9IygpRB1_+yZ.h9f(I.?:lF%Q'qGv7H\ Q_퉯7M6xp ̔lf 8UD={UJMws;)[|}[Q-u]XhY?YXā6/֒<^q2~Ɯ GPתQ)ޏ;[Q’xjg$za^@̨i^ƸCqPQS}jҙ)z$5t+Z(>&P6a"dYTOggSa+VоŹ(A@Vm3@ݦ%U ,͇WI-&quJk7Ml}a%œԒKCDųyyοj:D3BKǓ'O8qY@HagDޱ$ȁl8F `Nq" J+]cGUA\rz,scl;\J@k8%(Gj!:ߎuY]@ko%MX/Mρbm imO\-U YsʙܾS]+ROg[L+&Gt` %qb t;0}tka fkNۉ0be͜E4v-o. ?|U!ޯT_m VVBa#`PL 𸿣"0|I6{νe_kUh@X%ɔO4Z‡X ޗx;C3,vۖ0ɴ`oXl)d-N+sw@ye4 H - <:x 3b:@7}Pg1GH99FP3=gk9Ȃc|6v<$l?,c6:ئqR4{UzTASj_E ?~" Vw;T"x?OB: ZTq$ c2I2/E[7U@(&3+;h~zZAHYLo &c6*/ua*= Éz¶#xjOػ׉S?Y fA[ ?DR ^wݸW&XpOwhM$nR^jzC{E{ j,~Q"g$ >=1whoEP?+P:bcu0x# ؼb- H&\i'* xk\ u$=WqgùI*w"Sp~xrוg7?@UTA ؀q<udS C2|r>GTakczLy zAcy. lL]Ny?^.<̞xx]rcL81H@'Nfܕ6ju>-;ƿRjZ% w ^ J<>obpU_!k=zYo&Skrhsl];Ԝ$&~fi 9v yܑw{פc˅ ؄%ѿ0RZٯk0^ %'V](vw >E}Di`+\?::+3c0-) ݳ4@XcD?!F£R1I/mq2El)} ^Ytfy܊"Ѕ(:ec'\ G (gtLmd\.jIMYŕ{GR%n8@G( tuW kJН|$?f$6n2LT\J5-e- O6d>K/UE͓~a&I"zL6~IDC襚< _[11l34 d#MYOAޝ೿;bs:xQG$I9)9ihTthwS{mj(d}*ԖܡxcYtzY qUIZ-^ Oݸ& 6M>"0X?ufʋhPPD`;w ܽq9.8dy+8rQewnA}h8UN ߄/‡ϵ@n dU  ϟn>4D,=10V/1^P#Հ$hGꡬ`,>YZ3M 0Rsـҿ92ֆܭ&}I9pG$²|ih.^ٓFl_[v64y\i*gOH>x_yU (?ΝvͰfW|;d!˕򫡀kF/g#h5[(I|f Co4=ecԭރs3`zϒ##ʑId+'`>ȦE3V2|Z=axHAjLR cH5Mc0fǗa#qi:4cKdz &*H1Gg0́=lqR͝ʟM?ܬpB5 !>yҷ5KD'za] Y/]|^$jJ[?<> G7̨(%wLhfQl3Azjj 0;|Deo< N-tG9<ƚܑTaYp\PJ 7r~A Dq`,9Y/lvH*[^viUb #K'9=9tP0*0};G49ԓlT#Ej}:-ԺfQ{FK$it4gǼnwy P(`mN>׺m/1e=Bkb9hSKsECEOYTjHmQTL v{ f'an6I1-g Иs=vԸ$Ne"n|*`)KDL""CCаrrq+BZͥ}k +$MU8~XԱEwL_Elݝ4`AEӤt0 wYl+gk?*Z6Sư@?d>dAVpk;, W)M0VAyKljCi"@?s9N `Q k7-W*Тg˰W,Zn&&E`]fWqJ@g!K݋g%-|_:&|_KưXb) ĔsL< I2̱#9lɁJ&+N=Ä. '_O-~r +]<̆E}.pM_b  <ȶl9JS Jͣ>1UW'V.Ϭh? Ʊքr~[<SHV/GFJ)x PpfZlCW\|y.[*b( d>":u&i!X $!ߍ TpǺh(xEw$~ OggSaqiV&$(($..-1-.+,.+,-/,,-+./,./,.+.-+,.1.-/-,,+,,.-./,,1/12/.0-1./1,10./100/./-.+.0///./f٭mFwn-«!.u7hfZEp5 s5ô V{yfz=mu ݑy"u@H=w=mA?h@ ]EC3ɹ_q^?dlOAC/xW ՂTh29qX *G#Ԟ73+zڇS<::\7=سp8G5 $kȀWN-sGC9`8 [6Ԛu{U3]Tûi&m%&ߖ׫'黧7u; /k|i܏p|ɩ,p=7O|?ÛeHJqjԁaSwPPt;?I%i7VFJ v]jszuTW WiSRqtద,@v5oK^4/2PpH޾U 7tuW.NC4b341B4 K3'Zg$jaXW-{^χG0R ҎTr OOu۾pntj../^{!])+3P4oB׶{t}=J]fis<zǘҿ8pZ;@ak{Fx*}E-+أIraU~ rkkj[Y~$WU!ؾt*D5'A jT4uF#r@9Dnw̉}#:q@X>Ik3fatK.v?J|8Z0Е-ԓhqaӷ=,o'TzGa~T&*b[R+ER:V+끵u@ҾOv!UZ{ˬ2wxkLKL\aMW*eJs'sz[IUtͭ+jv=۟rVZ KmTEIu4KJbb .%>_![ Pjny4 m8~K\]B%6q#uX7TzK6k5{ \Ҽz=oKkJw)oHtnA|@pЈN%'ՅV ~\n%P)&:3[J3҄G_϶FXR8o JvNl ml*3cKn?zU.ջS)T WYKW>4ۦ^ȏp v7Na6]?pfԳ{[&lKAjv7wk5IN@^F),K$7R vmzmWdIћoK!}kDj nAKnS)uHZյNCUX;) nORIŵCKvCmrW)p/QGl՜ؓ ǠZxn}7Q(E͢W@O1T~K_HNH mZrKY[L<`jψ=d oA%?#}7[#8_>)WlU<Z,ru[.GfX[ \ux j&γOwZgL  g$Wtw構(әsh*鋧.!;ԜZ~=g4 wM/ŗ(Ђ*[FTbj1MIxftҷ@kp߇o$S756esZ6>^g4dx),~\(@ X lX&NWǂ3AՏC:. 1ZIJSrjc]tu39[+\ Jo $xIp@B暨"y^+>!?\r}w0^} J--m>QyDn6Mc3_ .sBqmP Gg=۴ڏ`|#"<^gʟ&x> Zw)o;Lo}t#\U| o 33PLZxy>%p<'tql_=G4 r.vP QGa33DЌb ,q)J~%`#3|_wb 3FbތB.hL*Ls WlPc|P ۆË"R['=`95r.df@ @xX=$\2 zxBuG+t dO.lֱ3Og ug mk&aϡuB" ?xkJ8R>(Fi .7muZ&uˠP/ڨ!Ci5RV0,[: ; ]8?Pn8V_s3i +my!O~`!uyi TZ#v, kڤV[Ǿ4)i\@J32V!A-<߶5PR/z6{ўoOa[n̖N\}Ht泓w[o'bV|K0e2c`FX<\6v|::47#-T/ъ )>P4ii[.wGMLji/Ď9AZG;Aۚ(`\ c%dvYvl!V̞C?I CpܼDZGvDM̿^ )?5 8Ě`Π:dFQ [DT_:gAq]/?لK̇z-oߞTjƱ~!i1/I|VG5uKڶuCYE2Ƹ?bsޟz^+kG0 zSǺ"L D%a^^D >-̘bXc>οR]d_0Ed mH|qA8nziϗGșJT)2/f;0Bnj)yXSkgĚNnQ/ϸb( h޹/u2M4!Nthب#o{_OggS@Ka^,$$##*-,**+,+'/.#%#&""$((+>$ews Nڗ%T@p_zx\z+F`Ód.p$ _Z6!zc(b& "t8~5̋kJ%h5 E ho50 윴8:w^D%Y7?LI 92 ʡ6=huvTy'UjT>TehPN:vQ^BvWyP"{13~jYvd!nrg{SubQ#I,jW  ~|\g1I%eZ`<6U 8֨St|˜<[|E{#(u uf~Eg͈I\w\ ~25_ 4$5"?{8݌D 6KӄlkVԽqѳd\r h Zg BdЏPZHTa?KO!c=. ~U_( ֛O,}gw{uKU[B[pېٟV<+RrꫫkHÙjakdG,_%yV[o Jg}%J~qqt5sZu= &˽~ jJ(߹iL}Q9à炙W,ȷ)i rug(?,AWw&VRhǭU^7 :;HۑB^IMу|plAb_VF4{g"l k9Ubbx¸G @ŪD53UIvZNA~]`ۃbJ t5( =f4f2327g5ݣg4fK@*W?fN;852}z=TM5j'¯wo$Yaz K߭am}uȜ"`3.|HxeY 1FDOWh t$p ƬѭL޴~KWm%q %Y#wFYNJSF=(>40k6lOg:͝u239=3cPҥA-Ez1J.DKi#qRrdZ'K=h"+ɜ(V@qXCp>A(r&jJa-<Ɯ2G*ܨŹJH }evr8m3[ G7,oǟ2<&tY3-7]Z(bt a`v̄v=ܧu|1љ9 Ը2kww0Ayd(K2r2򦥡?қfp1* E&^` ҆IQp vKR2lP6N$f:"Shr IP-BNX\\mP[;Y ^])){{0OXkZK]q!$qo<ھZRlnK ;:I8bqy>́{, sZc%8&ղu?!Q5&fgkl :ԖS/̦iCyx D|jUFFѲ7k1hƠiOK; 8"{ k(;#=@ j]V/C̩ _'AJh#O>cY%d߳g=m;j5_r+-(w3+85^hYlh#ۤ% $9&c|SWg1 ?Hn1G^k?t3bnfոnE }ekH3܆~M`2=zu ; 2Y$DVfpCMUld<_}Ո~ݍ~zL9RQ~4 " =.3{aupJC RyDJSoњWm|_9N3 ﵺbYWil>SeX|Ղ!|y3o2O4F͈%gZ[xkM CQ:x5D6u`nrM 'O,qQCB#"(,yLBcM SwL4X<x`Y 90Nj}}Q4 S1 Vd·~*$[9)ljbZ_]Mm[j+^j%U~.^g8Eq,^=#Gk:dzR쥆O:8̪3r'PR.ۇ }gerqcd"G>O_v~&k՜ o\To6c}8*j=r\ ͆V }lWĂ7iV5ΟЭҁ?BM|xe @xE~uQrw)~V}Cpo;KfZZPfyMњZhpkϯ<ڡrv[W^2>8ɠVSqSΉ^Zx]ԔoRg@l] ,.Aj˖fl+R:zۼe'/ͥn3>W PHKhzw;2(dX[Zr?zPOe8a0c\TP g+ hi-ہej~_OBFṙ >UԱ <#? ?|3B¯PZ /ū ֭4DѰ Q5ӃT)=~tp%|P˼j`vgVaTI6&nxSA[=*lRvH~sN[Keʜf./~ZBX/"j(\O: ZBjF2a?rMrMy@D93$x1nnֈnٞzbW%J=**żlnUOUC QCR+CF^%OlrpQ OB1GpX{n+ovհ?4^͈/&+HdȊ [H> UfE|yʓ&HXL^D^S=aʸƄ^#ա: B Y_5j=X'fA߀{wA&{)s&DNu :) ;l2U')Z-HUFclz)3kO}IŮ=6ĕĖk',HMCyS(˿I೟M) dG1֪r6=֦ny;+jKхs':Ѳ4GMԧ)%WK" $ 5F47CPu3K ]R;4ߗG> SXv揣W¹.ԕ#ۡ@E)@r>s]J㟕c יELVwrJ0Xp{N ؃dM8:Sv7(hj[z}ՏTO7N^)JKѾQI"C^0&& l%\# alDqxD* sBo fC-Rj2/I_x `,r-6^%ht%@q#&W9fyՆ4Gk0IطxI Gpޣ0Cx2x]%p=!/hI|-e8嬀s׻wtOF{ZpDhFEmFґ*<;PoTZj~[}6r=>L7.$@= K6>ÎQTڥn/L_j{H' RN[^0tXyM^yCI@P&=b N){=dZz*pP\`u0h5H3(x`mpU k5ѐa{Hs04{$МY1 t^%tzFE:G`r;~*8{D[9{^Uϼyvq8@D1}̤;G![UsVP4r[& [ wܤgqMqIhq:Q52u@1I`|f3>٩{!0rVhq1T_J9#$2R{`_ex;=⎤g $0 [-<}#Ǎux8%''%,s1FW\Dj*Q)aTfir <6O"PC*~T2BG"h ^ZO *fzgN8;C>2zֈw&̪PTCiߝl ɤxH&rGHs'kckΟ)Lvaq3&F8@|Kqo|5H`3&h'eSה^4_H^@<\gɈ8fld ls>myZK0`$k\vh;Uz6fPg+Ȃ=ͫ5,M^;r58)7WmD JåC;tr隕3hjWiRB @BsAS'2Valr H:+ @jDwgޞ.ftS>۵2}njktbuԨԕH_4 FS6r&l1Gn(bwޤo5ɪpmPIφVJȵc1]9cɥG+10Axo)?z&;[{S9ЯBW%F Fae~yQ>()n}=N?I/IbM-}ϐQkJ0.lZvV2hnf .yz5UZ'~dM]om}+bd %Q\X{3Vb@ǧ:oIvgI1Hvb0 gtvVN.aՠ5h7#~"I-ROU8ۣȌrЌ_m)[eŅN{q,O6:iA #¬7˲jo洂u=$oԧ7s<7eV:70L)Hu[>Y]/QF ơ 8L՛@7?[a_k={:J l~ VJK܁lY( *`NtJ!N_SVب5]~t.w'iT~D}HVa;Q Yoҫ; D $cZL ?FUEv6l!oi{^XD6|rLhr>e;'yNzv 3֚\_HX7  Ĕ c Q(yH)ʐ%W0*OunzG-{:-Jm~H2~E V1HquTS4Xf[u49Wľ>P?xh\޹p)eV}ϦJvKPHkh\@o Zlٮj.U&rݕz0!MI!J:e4l{kE122Ҝa%"8ޤ曕x|'@V`A-pVC&ŏ7ۊw~h#?uhi >=^Ol3jAL$OUo;_pRu{Qݠ?xqHR-ׂe$x8 U4WHr''IOXu 7hP`U6)/+;xJ { ({ dEàB/k~jmXԑs?@P,} ,`<3|⧂V1IF ̒`_Ki'{)-07U'޲dSw䞹 ^7ZZs/~xPO[1} IΌ-h3 (i|{aJ`"*U좕51p쫾iar'D]L>uuiC?:Yӏ2a^;]'a,VG? ԚAKO SWXwx"MgܿlYSĒCl'wf漵>7(ooLwM%'+gƷ_I橕'$f ǯ/oE=,?xV K<>mޯby D|l|)g5la i 7<9%~s)﫢u*饹`ez'# M~Pύ>`B- )ڧCG#V\EmDaGwk=P[3"S_v{4 Yl |}' p^8=>mcz3Nz OggS@at?1...+.+,./-+/,,-..,-+,/*-,,/",)&,-y-w튭mbjaY"}bǸSJSY[Sjrs˃ T[ioU;:{+sgKj{zlz ҝfWpd3d\̎ňC;R-|esഡ{u;<mcnĖ'koH)@ I|L_\QU2l^}jޘ>!c\-u7^1⩍?|ұlhd9k]ݧ|S2=Qrczf^_Dn}̂9Wl4X"u kÿLdpϷ A_֍g1|u ׿F pVܤpSSH^Q}ȗKa5ۜgm۬%sJWo O $u׹S E>WXdljq"}=M}Osa^? t@}=R ;$#&k;X8SbaKai3C4Jf{Z4.KSx 2nw>G0i 0<+QհE'[ĉ |[G(uM{(7k }aiq:XR-ꃧS ?UG72z><\Mѕ?ye%V;q 4mxYv>udJ~)qxD;2IG O ^Z+wxT Ii2Pڕbd E衰mwj#*bFE'P4 &D”)%c#',Y3z2*`|wȤw2UIw{vVa1(j޸ 2)v֮s;3}b|7ߟID=FNOU69!CWg1Aw$K8V5`)еx7Ts.ۭ:4 R"}~7]zρ1Xbq~6略C u ne/U5b?_#}1-Ϊ=ӼqЯ_7QBR%Xa>8&zHNIBsP> 2e65˯G8}S6Q=W-YPYlvVU3iڱB=1-@"oB۪lE__ ]f5~T0N[%VNwg3B%Ys~z G&j~Ro;% t#0̺UOf+hφY(8KPꜱi=_ AOSaG^VT$GXdt2 c2'~J=zcHz_lʖ~$<7%\6]F$ԣ"xxkƯoY9L̹ IF̳efY/6ńY@z9_|*uELȣ$>LDtVlIG{sj:~`k ] >@XآYkoW Gxr#V)IiH)\Σjw4 'C(G92:KcPŵ)1J HZ\Ig͡qNhh 9 9ptiX$Ir?_L2/ =jdJJC- V5OThj8<`_}o wW`|>A о 0$!ӱ{>唤XؕbҧJ; +L`n#9-vy7iiQPnͷz]O )#_Hk*mlsI/X  @+ae$6p!Dz ǩo3d#Q @K:ROo%'uF#1T,-%^Z2v >[a@3z9/pu(jDw7þϤLF6l汥f'-#nl @*Thqu[x p;ђ&&)DȨ 5IО]mY@gz6>UYJ18Z;|4?W]t4|.sٞAlR*ESzlShH ꌙd~_E:(FUp$b@tf Du"}=R5\1|ZaflB HИT"h{"Kb1(T(4N#%|PkEQ~C&En놎dp@f=,jI又I s<<[Tȁ/1 CN_f#CA[u\d^7JBKEH-Kd,s&<ܞ| H3YtH Fm+zޥx oBG;}`\@=wf]QƳCQXJ7AO?!2q ~ peI2h% ڴ[Fq<҇)|.7։&KZn%FT ƥmk_P" ΊSuػ{nǮꏵIB)m|J jgvDB$V>ĥwQ2C 8V' q|U}em;l-'&ێgFە~WcKD%|>8bFDpT֑6(5v1 5S&IcI,o]+Ma+~+Hj߯:HFYPe*^?w#.  OggSHa,s%$#)+*,-&(#($$+,>F·HB X`.UӞj% W]T_/E @sƙaM?GKx`>s-?e7視O G5h/ZVВhJPShKQ6x2{†bo4g:}pr>JZ#(4]m]~ yd8ˆ۹]1:h(UI3S ֙]yntdYXrT2ZdL*9K=r8^\WAlI-(ua? 6 #Z\3ThHxG_Ƚ9&l,hq&2g=3˕/aN;` o@p&|וzՌ>N*ڀPŧJ9frKhm}Ð xEd#a+P>yz`DМČϤ{}I!P9;DM;͙+L鷝Ef.qIq Ssb(Kɍ_}Vm$vx޶\G?fNTN8HI882LaC/>IXvӵQ1ga}8 Wf!Hrmkn/1-59mWcXFy'yV\VJ2%T8,qog B[ E\e("30shͥXtm8F <`K-^1LՄb=g_0J{DT(HQFxhk\U_֩D|\ӃkUNϦߝ #,ؘ KBai䙐)TfR5Lq\-1DvHukPq,IXJ] $D BnKlZe!EZ~@~DX.]̧6 `d2Ch+V-9qBҮ(6D >! 7kO4 ^ŴI6Y4 WILw7]ܬ"5;61HGa~_~Kάُ RU8w~S%%7Hk0 ro?fHR]i.mVm23ڎRY]n9XZ*u i,>1C.#*#59.Ya_ %OHs挗 z2.2tA V<EOytv<gbdG}j ]9:/Ni:o?WT[7҆N ШMVOqv Mm .☋D = >zʩh竦'?_4zЖKYPb|ש/r5U 67J**4>ђd:WE\%Ħ ekUq64+NԤ렆%zgۿlv#(xMnh &=Hlɖk_@z@1F+UnkE S-`7Z1ǥetH sAp˛o;ai۬M=;^JAٚXyB1Ƿ(Dt[ (AuG ً3S >&"]8AgbHS&Ar٤l 񤂪a6E}Mn𖊽R {.1 ,)5K>+AK=k}m2U<[J}VB?f.Ap> zKegq=886S3әxm]ENo֟lt%ZuW:.wra'f]fݕY+u>09k%-/TM6šez*X'|Q^;[{56ݬ%B73+TM@Uu ^d\n㯙U ' XO&$"IL klc ԍX׏*a9:AasjFL9h U{zDt~WMm61#V ErzW'8'~LvKGӘ]2&|EmYHQ1KQQVh|F"d,_jmdͪ4n$"YX E MnBwUi7-.&QfT߀31cM`Mh9k]93=??F43"BG IU% _}o_}yq{o1~ȉv|Tm g;d^̤V]SJX=Y~*dxjS'?t3o&ΣMtMI9R1Zw/CdoA<^>S=b^PUeGAZ#98w>!CQ..l+:_K$˖ᗧqEE>u GL]yM XfJeEłg 4I%N>^-o'9IN|^xT'2"f8[zYF.Mo}]j2K^SݙM.wl0ٟǕ8Uw',t+Sx#j%,tae@] C#Ⱦg )Ø<uC:Ej}ErVt'Ǐk\Z+>ZUgڗ*G6敚=5?C~`il;6։z%ẙ  -Y7=ԡK~ rXὈ!k ( }+XmعroЮ5s-.뜪rDKlrϬ^T/(Q.nd(:;D%PƟ} nRH/76M;o|=&|^KڹjZ{M_ TH ljcxB[0V7;uO\ǫN,f4ۡC.M⺥ b3dy]U3- '`Œ ާW~ u\g`_ kR#;|k [\z̴v_FxR 7yDR abybaox_I45œҖԙ. ]oyZQ*5 Y=uaq6^ eф!:G*&U/q!ķ Km"GG[qZK䆶:׷w-!ѭ4+&9' 8wI#fl(VRhDMUS%>u>{g4ͩjC-I)я[)GOggS_aP5|\&c=< EBtE\SN?*`ȳTptֲHf u9LRmDؔʥd  6kTgD,.QF >GW zIƹDPFzsJo,|k"plb-7Y4PUU]% &P~Ncdck\c啗E ٯ˶l>?o~P[-o54zAyO66KU>d˶;Y+qK-jRaz7ab.U 7ўusDI>+*0ȃhH*QYP6O"ڗS;2pW+18`˕8Qv0O4%y r8/-[CZDǫe%x 7ݵ}\=@mL,3d& Zparlatype-1.5.4/libparlatype/tests/progressdialog.c0000644000175000017500000000230313176574165017502 00000000000000/* Copyright (C) Gabor Karsay 2017 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #include #include static void progressdialog_new (void) { PtProgressDialog *testdialog; testdialog = pt_progress_dialog_new (NULL); g_assert (PT_IS_PROGRESS_DIALOG (testdialog)); pt_progress_dialog_set_progress (testdialog, 0.5); gtk_widget_destroy (GTK_WIDGET (testdialog)); } int main (int argc, char *argv[]) { g_test_init (&argc, &argv, NULL); g_test_add_func ("/progressdialog/new", progressdialog_new); gtk_init (NULL, NULL); return g_test_run (); } parlatype-1.5.4/libparlatype/tests/Makefile.in0000644000175000017500000015224113204324034016342 00000000000000# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # GLIB - Library of useful C routines VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(top_srcdir)/glib-tap.mk $(srcdir)/Makefile.in \ $(srcdir)/Makefile.am $(top_srcdir)/depcomp \ $(top_srcdir)/test-driver README TESTS = $(am__EXEEXT_1) installed_test_PROGRAMS = $(am__EXEEXT_4) noinst_PROGRAMS = $(am__EXEEXT_5) check_PROGRAMS = $(am__EXEEXT_3) @ENABLE_ALWAYS_BUILD_TESTS_TRUE@am__append_1 = $(all_test_ltlibs) @ENABLE_ALWAYS_BUILD_TESTS_TRUE@am__append_2 = $(all_test_programs) @ENABLE_ALWAYS_BUILD_TESTS_TRUE@am__append_3 = $(all_test_scripts) @ENABLE_ALWAYS_BUILD_TESTS_TRUE@am__append_4 = $(all_test_data) @ENABLE_ALWAYS_BUILD_TESTS_FALSE@am__append_5 = $(all_test_ltlibs) @ENABLE_ALWAYS_BUILD_TESTS_FALSE@am__append_6 = $(all_test_programs) @ENABLE_ALWAYS_BUILD_TESTS_FALSE@am__append_7 = $(all_test_scripts) @ENABLE_ALWAYS_BUILD_TESTS_FALSE@am__append_8 = $(all_test_data) @ENABLE_INSTALLED_TESTS_TRUE@am__append_9 = $(test_programs) $(installed_test_programs) \ @ENABLE_INSTALLED_TESTS_TRUE@ $(test_extra_programs) $(installed_test_extra_programs) @ENABLE_INSTALLED_TESTS_TRUE@am__append_10 = $(test_scripts) \ @ENABLE_INSTALLED_TESTS_TRUE@ $(installed_test_scripts) \ @ENABLE_INSTALLED_TESTS_TRUE@ $(test_extra_scripts) \ @ENABLE_INSTALLED_TESTS_TRUE@ $(installed_test_extra_scripts) \ @ENABLE_INSTALLED_TESTS_TRUE@ $(dist_test_scripts) \ @ENABLE_INSTALLED_TESTS_TRUE@ $(dist_test_extra_scripts) \ @ENABLE_INSTALLED_TESTS_TRUE@ $(dist_installed_test_scripts) \ @ENABLE_INSTALLED_TESTS_TRUE@ $(dist_installed_test_extra_scripts) @ENABLE_INSTALLED_TESTS_TRUE@am__append_11 = $(test_data) \ @ENABLE_INSTALLED_TESTS_TRUE@ $(installed_test_data) \ @ENABLE_INSTALLED_TESTS_TRUE@ $(dist_test_data) \ @ENABLE_INSTALLED_TESTS_TRUE@ $(dist_installed_test_data) @ENABLE_INSTALLED_TESTS_TRUE@am__append_12 = $(test_ltlibraries) $(installed_test_ltlibraries) @ENABLE_INSTALLED_TESTS_TRUE@am__append_13 = $(installed_test_meta_DATA) subdir = tests ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_code_coverage.m4 \ $(top_srcdir)/m4/ax_valgrind_check.m4 \ $(top_srcdir)/m4/glibtests.m4 $(top_srcdir)/m4/gtk-doc.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(installed_testdir)" \ "$(DESTDIR)$(installed_testdir)" \ "$(DESTDIR)$(installed_testdir)" \ "$(DESTDIR)$(installed_test_metadir)" \ "$(DESTDIR)$(installed_testdir)" LTLIBRARIES = $(installed_test_LTLIBRARIES) $(noinst_LTLIBRARIES) am__EXEEXT_1 = player$(EXEEXT) progressdialog$(EXEEXT) \ wavedata$(EXEEXT) waveloader$(EXEEXT) waveviewer$(EXEEXT) am__EXEEXT_2 = $(am__EXEEXT_1) @ENABLE_ALWAYS_BUILD_TESTS_FALSE@am__EXEEXT_3 = $(am__EXEEXT_2) @ENABLE_INSTALLED_TESTS_TRUE@am__EXEEXT_4 = $(am__EXEEXT_1) @ENABLE_ALWAYS_BUILD_TESTS_TRUE@am__EXEEXT_5 = $(am__EXEEXT_2) PROGRAMS = $(installed_test_PROGRAMS) $(noinst_PROGRAMS) player_SOURCES = player.c player_OBJECTS = player.$(OBJEXT) player_LDADD = $(LDADD) am__DEPENDENCIES_1 = player_DEPENDENCIES = $(top_builddir)/src/libparlatype.la \ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) am__v_lt_0 = --silent am__v_lt_1 = progressdialog_SOURCES = progressdialog.c progressdialog_OBJECTS = progressdialog.$(OBJEXT) progressdialog_LDADD = $(LDADD) progressdialog_DEPENDENCIES = $(top_builddir)/src/libparlatype.la \ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) wavedata_SOURCES = wavedata.c wavedata_OBJECTS = wavedata.$(OBJEXT) wavedata_LDADD = $(LDADD) wavedata_DEPENDENCIES = $(top_builddir)/src/libparlatype.la \ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) waveloader_SOURCES = waveloader.c waveloader_OBJECTS = waveloader.$(OBJEXT) waveloader_LDADD = $(LDADD) waveloader_DEPENDENCIES = $(top_builddir)/src/libparlatype.la \ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) waveviewer_SOURCES = waveviewer.c waveviewer_OBJECTS = waveviewer.$(OBJEXT) waveviewer_LDADD = $(LDADD) waveviewer_DEPENDENCIES = $(top_builddir)/src/libparlatype.la \ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) SCRIPTS = $(installed_test_SCRIPTS) $(noinst_SCRIPTS) AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) AM_V_CC = $(am__v_CC_@AM_V@) am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) am__v_CC_0 = @echo " CC " $@; am__v_CC_1 = CCLD = $(CC) LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CCLD = $(am__v_CCLD_@AM_V@) am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) am__v_CCLD_0 = @echo " CCLD " $@; am__v_CCLD_1 = SOURCES = player.c progressdialog.c wavedata.c waveloader.c \ waveviewer.c DIST_SOURCES = player.c progressdialog.c wavedata.c waveloader.c \ waveviewer.c am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac DATA = $(installed_test_meta_DATA) $(nobase_installed_test_DATA) \ $(noinst_DATA) am__extra_recursive_targets = check-valgrind-recursive \ check-valgrind-memcheck-recursive \ check-valgrind-helgrind-recursive check-valgrind-drd-recursive \ check-valgrind-sgcheck-recursive am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags am__tty_colors_dummy = \ mgn= red= grn= lgn= blu= brg= std=; \ am__color_tests=no am__tty_colors = { \ $(am__tty_colors_dummy); \ if test "X$(AM_COLOR_TESTS)" = Xno; then \ am__color_tests=no; \ elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ am__color_tests=yes; \ elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ am__color_tests=yes; \ fi; \ if test $$am__color_tests = yes; then \ red=''; \ grn=''; \ lgn=''; \ blu=''; \ mgn=''; \ brg=''; \ std=''; \ fi; \ } am__recheck_rx = ^[ ]*:recheck:[ ]* am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* # A command that, given a newline-separated list of test names on the # standard input, print the name of the tests that are to be re-run # upon "make recheck". am__list_recheck_tests = $(AWK) '{ \ recheck = 1; \ while ((rc = (getline line < ($$0 ".trs"))) != 0) \ { \ if (rc < 0) \ { \ if ((getline line2 < ($$0 ".log")) < 0) \ recheck = 0; \ break; \ } \ else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ { \ recheck = 0; \ break; \ } \ else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ { \ break; \ } \ }; \ if (recheck) \ print $$0; \ close ($$0 ".trs"); \ close ($$0 ".log"); \ }' # A command that, given a newline-separated list of test names on the # standard input, create the global log from their .trs and .log files. am__create_global_log = $(AWK) ' \ function fatal(msg) \ { \ print "fatal: making $@: " msg | "cat >&2"; \ exit 1; \ } \ function rst_section(header) \ { \ print header; \ len = length(header); \ for (i = 1; i <= len; i = i + 1) \ printf "="; \ printf "\n\n"; \ } \ { \ copy_in_global_log = 1; \ global_test_result = "RUN"; \ while ((rc = (getline line < ($$0 ".trs"))) != 0) \ { \ if (rc < 0) \ fatal("failed to read from " $$0 ".trs"); \ if (line ~ /$(am__global_test_result_rx)/) \ { \ sub("$(am__global_test_result_rx)", "", line); \ sub("[ ]*$$", "", line); \ global_test_result = line; \ } \ else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ copy_in_global_log = 0; \ }; \ if (copy_in_global_log) \ { \ rst_section(global_test_result ": " $$0); \ while ((rc = (getline line < ($$0 ".log"))) != 0) \ { \ if (rc < 0) \ fatal("failed to read from " $$0 ".log"); \ print line; \ }; \ printf "\n"; \ }; \ close ($$0 ".trs"); \ close ($$0 ".log"); \ }' # Restructured Text title. am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } # Solaris 10 'make', and several other traditional 'make' implementations, # pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it # by disabling -e (using the XSI extension "set +e") if it's set. am__sh_e_setup = case $$- in *e*) set +e;; esac # Default flags passed to test drivers. am__common_driver_flags = \ --color-tests "$$am__color_tests" \ --enable-hard-errors "$$am__enable_hard_errors" \ --expect-failure "$$am__expect_failure" # To be inserted before the command running the test. Creates the # directory for the log if needed. Stores in $dir the directory # containing $f, in $tst the test, in $log the log. Executes the # developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and # passes TESTS_ENVIRONMENT. Set up options for the wrapper that # will run the test scripts (or their associated LOG_COMPILER, if # thy have one). am__check_pre = \ $(am__sh_e_setup); \ $(am__vpath_adj_setup) $(am__vpath_adj) \ $(am__tty_colors); \ srcdir=$(srcdir); export srcdir; \ case "$@" in \ */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ *) am__odir=.;; \ esac; \ test "x$$am__odir" = x"." || test -d "$$am__odir" \ || $(MKDIR_P) "$$am__odir" || exit $$?; \ if test -f "./$$f"; then dir=./; \ elif test -f "$$f"; then dir=; \ else dir="$(srcdir)/"; fi; \ tst=$$dir$$f; log='$@'; \ if test -n '$(DISABLE_HARD_ERRORS)'; then \ am__enable_hard_errors=no; \ else \ am__enable_hard_errors=yes; \ fi; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ am__expect_failure=yes;; \ *) \ am__expect_failure=no;; \ esac; \ $(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) # A shell command to get the names of the tests scripts with any registered # extension removed (i.e., equivalently, the names of the test logs, with # the '.log' extension removed). The result is saved in the shell variable # '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, # we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", # since that might cause problem with VPATH rewrites for suffix-less tests. # See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. am__set_TESTS_bases = \ bases='$(TEST_LOGS)'; \ bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ bases=`echo $$bases` RECHECK_LOGS = $(TEST_LOGS) AM_RECURSIVE_TARGETS = check recheck TEST_SUITE_LOG = test-suite.log TEST_EXTENSIONS = @EXEEXT@ .test LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS) am__set_b = \ case '$@' in \ */*) \ case '$*' in \ */*) b='$*';; \ *) b=`echo '$@' | sed 's/\.log$$//'`; \ esac;; \ *) \ b='$*';; \ esac am__test_logs1 = $(TESTS:=.log) am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) TEST_LOGS = $(am__test_logs2:.test.log=.log) TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \ $(TEST_LOG_FLAGS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ CODE_COVERAGE_CPPFLAGS = @CODE_COVERAGE_CPPFLAGS@ CODE_COVERAGE_CXXFLAGS = @CODE_COVERAGE_CXXFLAGS@ CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ CODE_COVERAGE_LIBS = @CODE_COVERAGE_LIBS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_VALGRIND_drd = @ENABLE_VALGRIND_drd@ ENABLE_VALGRIND_helgrind = @ENABLE_VALGRIND_helgrind@ ENABLE_VALGRIND_memcheck = @ENABLE_VALGRIND_memcheck@ ENABLE_VALGRIND_sgcheck = @ENABLE_VALGRIND_sgcheck@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GCOV = @GCOV@ GENHTML = @GENHTML@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLADE_CATALOG_DIR = @GLADE_CATALOG_DIR@ GLADE_CFLAGS = @GLADE_CFLAGS@ GLADE_LIBS = @GLADE_LIBS@ GLADE_PIXMAP_DIR = @GLADE_PIXMAP_DIR@ GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ GSTREAMER_CFLAGS = @GSTREAMER_CFLAGS@ GSTREAMER_LIBS = @GSTREAMER_LIBS@ GTKDOC_CHECK = @GTKDOC_CHECK@ GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ GTKDOC_REBASE = @GTKDOC_REBASE@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ HTML_DIR = @HTML_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ LCOV = @LCOV@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PARLATYPE_API_VERSION = @PARLATYPE_API_VERSION@ PARLATYPE_SO_VERSION = @PARLATYPE_SO_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VALGRIND = @VALGRIND@ VALGRIND_ENABLED = @VALGRIND_ENABLED@ VERSION = @VERSION@ WARNINGCFLAGS = @WARNINGCFLAGS@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ gsettingsschemadir = @gsettingsschemadir@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ installed_test_metadir = @installed_test_metadir@ installed_testdir = @installed_testdir@ intltool__v_merge_options_ = @intltool__v_merge_options_@ intltool__v_merge_options_0 = @intltool__v_merge_options_0@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ valgrind_enabled_tools = @valgrind_enabled_tools@ valgrind_tools = @valgrind_tools@ AM_TESTS_ENVIRONMENT = \ G_TEST_SRCDIR="$(abs_srcdir)" \ G_TEST_BUILDDIR="$(abs_builddir)" \ G_DEBUG=gc-friendly \ MALLOC_CHECK_=2 \ MALLOC_PERTURB_=$$(($${RANDOM:-256} % 256)) LOG_DRIVER = env AM_TAP_AWK='$(AWK)' $(SHELL) $(top_srcdir)/tap-driver.sh LOG_COMPILER = $(top_srcdir)/tap-test NULL = # initialize variables for unconditional += appending BUILT_SOURCES = BUILT_EXTRA_DIST = CLEANFILES = *.log *.trs $(am__append_13) DISTCLEANFILES = MAINTAINERCLEANFILES = EXTRA_DIST = $(all_dist_test_scripts) $(all_dist_test_data) glib.supp \ gst.supp data/README installed_test_LTLIBRARIES = $(am__append_12) installed_test_SCRIPTS = $(am__append_10) nobase_installed_test_DATA = $(am__append_11) noinst_LTLIBRARIES = $(am__append_1) noinst_SCRIPTS = $(am__append_3) noinst_DATA = $(am__append_4) check_LTLIBRARIES = $(am__append_5) check_SCRIPTS = $(am__append_7) check_DATA = $(am__append_8) # Note: build even the installed-only targets during 'make check' to ensure that they still work. # We need to do a bit of trickery here and manage disting via EXTRA_DIST instead of using dist_ prefixes to # prevent automake from mistreating gmake functions like $(wildcard ...) and $(addprefix ...) as if they were # filenames, including removing duplicate instances of the opening part before the space, eg. '$(addprefix'. all_test_programs = $(test_programs) $(uninstalled_test_programs) $(installed_test_programs) \ $(test_extra_programs) $(uninstalled_test_extra_programs) $(installed_test_extra_programs) all_test_scripts = $(test_scripts) $(uninstalled_test_scripts) \ $(installed_test_scripts) $(test_extra_scripts) \ $(uninstalled_test_extra_scripts) \ $(installed_test_extra_scripts) $(all_dist_test_scripts) all_dist_test_scripts = $(dist_test_scripts) $(dist_uninstalled_test_scripts) $(dist_installed_test_scripts) \ $(dist_test_extra_scripts) $(dist_uninstalled_test_extra_scripts) $(dist_installed_test_extra_scripts) all_test_data = $(test_data) $(uninstalled_test_data) \ $(installed_test_data) $(all_dist_test_data) all_dist_test_data = $(dist_test_data) $(dist_uninstalled_test_data) $(dist_installed_test_data) all_test_ltlibs = $(test_ltlibraries) $(uninstalled_test_ltlibraries) $(installed_test_ltlibraries) @ENABLE_INSTALLED_TESTS_TRUE@installed_testcases = $(test_programs) $(installed_test_programs) \ @ENABLE_INSTALLED_TESTS_TRUE@ $(test_scripts) $(installed_test_scripts) \ @ENABLE_INSTALLED_TESTS_TRUE@ $(dist_test_scripts) $(dist_installed_test_scripts) @ENABLE_INSTALLED_TESTS_TRUE@installed_test_meta_DATA = $(installed_testcases:=.test) VALGRIND_SUPPRESSIONS_FILES = glib.supp gst.supp CODE_COVERAGE_IGNORE_PATTERN = pt-resources.c *include* AM_CFLAGS = -g $(GTK_CFLAGS) $(GSTREAMER_CFLAGS) $(MAINTAINER_CFLAGS) LDADD = $(top_builddir)/src/libparlatype.la $(GTK_LIBS) $(GSTREAMER_LIBS) AM_LDFLAGS = -export-dynamic AM_CPPFLAGS = \ -DG_LOG_DOMAIN=\"libparlatype-unittest\" \ -I$(top_srcdir) \ -I$(top_builddir) test_programs = \ player \ progressdialog \ wavedata \ waveloader \ waveviewer dist_test_data = \ data/test1.ogg all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-am .SUFFIXES: .SUFFIXES: .c .lo .log .o .obj .test .test$(EXEEXT) .trs $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/glib-tap.mk $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign tests/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_srcdir)/glib-tap.mk: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-checkLTLIBRARIES: -test -z "$(check_LTLIBRARIES)" || rm -f $(check_LTLIBRARIES) @list='$(check_LTLIBRARIES)'; \ locs=`for p in $$list; do echo $$p; done | \ sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ sort -u`; \ test -z "$$locs" || { \ echo rm -f $${locs}; \ rm -f $${locs}; \ } install-installed_testLTLIBRARIES: $(installed_test_LTLIBRARIES) @$(NORMAL_INSTALL) @list='$(installed_test_LTLIBRARIES)'; test -n "$(installed_testdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(MKDIR_P) '$(DESTDIR)$(installed_testdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(installed_testdir)" || exit 1; \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(installed_testdir)'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(installed_testdir)"; \ } uninstall-installed_testLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(installed_test_LTLIBRARIES)'; test -n "$(installed_testdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(installed_testdir)/$$f'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(installed_testdir)/$$f"; \ done clean-installed_testLTLIBRARIES: -test -z "$(installed_test_LTLIBRARIES)" || rm -f $(installed_test_LTLIBRARIES) @list='$(installed_test_LTLIBRARIES)'; \ locs=`for p in $$list; do echo $$p; done | \ sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ sort -u`; \ test -z "$$locs" || { \ echo rm -f $${locs}; \ rm -f $${locs}; \ } clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; \ locs=`for p in $$list; do echo $$p; done | \ sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ sort -u`; \ test -z "$$locs" || { \ echo rm -f $${locs}; \ rm -f $${locs}; \ } clean-checkPROGRAMS: @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list install-installed_testPROGRAMS: $(installed_test_PROGRAMS) @$(NORMAL_INSTALL) @list='$(installed_test_PROGRAMS)'; test -n "$(installed_testdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(installed_testdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(installed_testdir)" || exit 1; \ fi; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p \ || test -f $$p1 \ ; then echo "$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n;h' \ -e 's|.*|.|' \ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) files[d] = files[d] " " $$1; \ else { print "f", $$3 "/" $$4, $$1; } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(installed_testdir)$$dir'"; \ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(installed_testdir)$$dir" || exit $$?; \ } \ ; done uninstall-installed_testPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(installed_test_PROGRAMS)'; test -n "$(installed_testdir)" || list=; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ -e 's/$$/$(EXEEXT)/' \ `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(installed_testdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(installed_testdir)" && rm -f $$files clean-installed_testPROGRAMS: @list='$(installed_test_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list clean-noinstPROGRAMS: @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list player$(EXEEXT): $(player_OBJECTS) $(player_DEPENDENCIES) $(EXTRA_player_DEPENDENCIES) @rm -f player$(EXEEXT) $(AM_V_CCLD)$(LINK) $(player_OBJECTS) $(player_LDADD) $(LIBS) progressdialog$(EXEEXT): $(progressdialog_OBJECTS) $(progressdialog_DEPENDENCIES) $(EXTRA_progressdialog_DEPENDENCIES) @rm -f progressdialog$(EXEEXT) $(AM_V_CCLD)$(LINK) $(progressdialog_OBJECTS) $(progressdialog_LDADD) $(LIBS) wavedata$(EXEEXT): $(wavedata_OBJECTS) $(wavedata_DEPENDENCIES) $(EXTRA_wavedata_DEPENDENCIES) @rm -f wavedata$(EXEEXT) $(AM_V_CCLD)$(LINK) $(wavedata_OBJECTS) $(wavedata_LDADD) $(LIBS) waveloader$(EXEEXT): $(waveloader_OBJECTS) $(waveloader_DEPENDENCIES) $(EXTRA_waveloader_DEPENDENCIES) @rm -f waveloader$(EXEEXT) $(AM_V_CCLD)$(LINK) $(waveloader_OBJECTS) $(waveloader_LDADD) $(LIBS) waveviewer$(EXEEXT): $(waveviewer_OBJECTS) $(waveviewer_DEPENDENCIES) $(EXTRA_waveviewer_DEPENDENCIES) @rm -f waveviewer$(EXEEXT) $(AM_V_CCLD)$(LINK) $(waveviewer_OBJECTS) $(waveviewer_LDADD) $(LIBS) install-installed_testSCRIPTS: $(installed_test_SCRIPTS) @$(NORMAL_INSTALL) @list='$(installed_test_SCRIPTS)'; test -n "$(installed_testdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(installed_testdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(installed_testdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n' \ -e 'h;s|.*|.|' \ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) { files[d] = files[d] " " $$1; \ if (++n[d] == $(am__install_max)) { \ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ else { print "f", d "/" $$4, $$1 } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(installed_testdir)$$dir'"; \ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(installed_testdir)$$dir" || exit $$?; \ } \ ; done uninstall-installed_testSCRIPTS: @$(NORMAL_UNINSTALL) @list='$(installed_test_SCRIPTS)'; test -n "$(installed_testdir)" || exit 0; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 's,.*/,,;$(transform)'`; \ dir='$(DESTDIR)$(installed_testdir)'; $(am__uninstall_files_from_dir) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/player.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/progressdialog.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wavedata.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/waveloader.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/waveviewer.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< .c.obj: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-installed_test_metaDATA: $(installed_test_meta_DATA) @$(NORMAL_INSTALL) @list='$(installed_test_meta_DATA)'; test -n "$(installed_test_metadir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(installed_test_metadir)'"; \ $(MKDIR_P) "$(DESTDIR)$(installed_test_metadir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(installed_test_metadir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(installed_test_metadir)" || exit $$?; \ done uninstall-installed_test_metaDATA: @$(NORMAL_UNINSTALL) @list='$(installed_test_meta_DATA)'; test -n "$(installed_test_metadir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(installed_test_metadir)'; $(am__uninstall_files_from_dir) install-nobase_installed_testDATA: $(nobase_installed_test_DATA) @$(NORMAL_INSTALL) @list='$(nobase_installed_test_DATA)'; test -n "$(installed_testdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(installed_testdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(installed_testdir)" || exit 1; \ fi; \ $(am__nobase_list) | while read dir files; do \ xfiles=; for file in $$files; do \ if test -f "$$file"; then xfiles="$$xfiles $$file"; \ else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \ test -z "$$xfiles" || { \ test "x$$dir" = x. || { \ echo " $(MKDIR_P) '$(DESTDIR)$(installed_testdir)/$$dir'"; \ $(MKDIR_P) "$(DESTDIR)$(installed_testdir)/$$dir"; }; \ echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(installed_testdir)/$$dir'"; \ $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(installed_testdir)/$$dir" || exit $$?; }; \ done uninstall-nobase_installed_testDATA: @$(NORMAL_UNINSTALL) @list='$(nobase_installed_test_DATA)'; test -n "$(installed_testdir)" || list=; \ $(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \ dir='$(DESTDIR)$(installed_testdir)'; $(am__uninstall_files_from_dir) check-valgrind-local: check-valgrind-memcheck-local: check-valgrind-helgrind-local: check-valgrind-drd-local: check-valgrind-sgcheck-local: ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-am TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-am CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-am cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags # Recover from deleted '.trs' file; this should ensure that # "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create # both 'foo.log' and 'foo.trs'. Break the recipe in two subshells # to avoid problems with "make -n". .log.trs: rm -f $< $@ $(MAKE) $(AM_MAKEFLAGS) $< # Leading 'am--fnord' is there to ensure the list of targets does not # expand to empty, as could happen e.g. with make check TESTS=''. am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) am--force-recheck: @: $(TEST_SUITE_LOG): $(TEST_LOGS) @$(am__set_TESTS_bases); \ am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ redo_bases=`for i in $$bases; do \ am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ done`; \ if test -n "$$redo_bases"; then \ redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ if $(am__make_dryrun); then :; else \ rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ fi; \ fi; \ if test -n "$$am__remaking_logs"; then \ echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ "recursion detected" >&2; \ else \ am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ fi; \ if $(am__make_dryrun); then :; else \ st=0; \ errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ for i in $$redo_bases; do \ test -f $$i.trs && test -r $$i.trs \ || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ test -f $$i.log && test -r $$i.log \ || { echo "$$errmsg $$i.log" >&2; st=1; }; \ done; \ test $$st -eq 0 || exit 1; \ fi @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ ws='[ ]'; \ results=`for b in $$bases; do echo $$b.trs; done`; \ test -n "$$results" || results=/dev/null; \ all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ if test `expr $$fail + $$xpass + $$error` -eq 0; then \ success=true; \ else \ success=false; \ fi; \ br='==================='; br=$$br$$br$$br$$br; \ result_count () \ { \ if test x"$$1" = x"--maybe-color"; then \ maybe_colorize=yes; \ elif test x"$$1" = x"--no-color"; then \ maybe_colorize=no; \ else \ echo "$@: invalid 'result_count' usage" >&2; exit 4; \ fi; \ shift; \ desc=$$1 count=$$2; \ if test $$maybe_colorize = yes && test $$count -gt 0; then \ color_start=$$3 color_end=$$std; \ else \ color_start= color_end=; \ fi; \ echo "$${color_start}# $$desc $$count$${color_end}"; \ }; \ create_testsuite_report () \ { \ result_count $$1 "TOTAL:" $$all "$$brg"; \ result_count $$1 "PASS: " $$pass "$$grn"; \ result_count $$1 "SKIP: " $$skip "$$blu"; \ result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ result_count $$1 "FAIL: " $$fail "$$red"; \ result_count $$1 "XPASS:" $$xpass "$$red"; \ result_count $$1 "ERROR:" $$error "$$mgn"; \ }; \ { \ echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ $(am__rst_title); \ create_testsuite_report --no-color; \ echo; \ echo ".. contents:: :depth: 2"; \ echo; \ for b in $$bases; do echo $$b; done \ | $(am__create_global_log); \ } >$(TEST_SUITE_LOG).tmp || exit 1; \ mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ if $$success; then \ col="$$grn"; \ else \ col="$$red"; \ test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ fi; \ echo "$${col}$$br$${std}"; \ echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ echo "$${col}$$br$${std}"; \ create_testsuite_report --maybe-color; \ echo "$$col$$br$$std"; \ if $$success; then :; else \ echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ if test -n "$(PACKAGE_BUGREPORT)"; then \ echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ fi; \ echo "$$col$$br$$std"; \ fi; \ $$success || exit 1 check-TESTS: @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) @set +e; $(am__set_TESTS_bases); \ log_list=`for i in $$bases; do echo $$i.log; done`; \ trs_list=`for i in $$bases; do echo $$i.trs; done`; \ log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ exit $$?; recheck: all $(check_LTLIBRARIES) $(check_PROGRAMS) $(check_SCRIPTS) $(check_DATA) @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) @set +e; $(am__set_TESTS_bases); \ bases=`for i in $$bases; do echo $$i; done \ | $(am__list_recheck_tests)` || exit 1; \ log_list=`for i in $$bases; do echo $$i.log; done`; \ log_list=`echo $$log_list`; \ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ am__force_recheck=am--force-recheck \ TEST_LOGS="$$log_list"; \ exit $$? player.log: player$(EXEEXT) @p='player$(EXEEXT)'; \ b='player'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) progressdialog.log: progressdialog$(EXEEXT) @p='progressdialog$(EXEEXT)'; \ b='progressdialog'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) wavedata.log: wavedata$(EXEEXT) @p='wavedata$(EXEEXT)'; \ b='wavedata'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) waveloader.log: waveloader$(EXEEXT) @p='waveloader$(EXEEXT)'; \ b='waveloader'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) waveviewer.log: waveviewer$(EXEEXT) @p='waveviewer$(EXEEXT)'; \ b='waveviewer'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) .test.log: @p='$<'; \ $(am__set_b); \ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) @am__EXEEXT_TRUE@.test$(EXEEXT).log: @am__EXEEXT_TRUE@ @p='$<'; \ @am__EXEEXT_TRUE@ $(am__set_b); \ @am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ @am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ @am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ @am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_LTLIBRARIES) $(check_PROGRAMS) \ $(check_SCRIPTS) $(check_DATA) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-am all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(DATA) installdirs: for dir in "$(DESTDIR)$(installed_testdir)" "$(DESTDIR)$(installed_testdir)" "$(DESTDIR)$(installed_testdir)" "$(DESTDIR)$(installed_test_metadir)" "$(DESTDIR)$(installed_testdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) check-valgrind: check-valgrind-am check-valgrind-am: check-valgrind-local check-valgrind-drd: check-valgrind-drd-am check-valgrind-drd-am: check-valgrind-drd-local check-valgrind-helgrind: check-valgrind-helgrind-am check-valgrind-helgrind-am: check-valgrind-helgrind-local check-valgrind-memcheck: check-valgrind-memcheck-am check-valgrind-memcheck-am: check-valgrind-memcheck-local check-valgrind-sgcheck: check-valgrind-sgcheck-am check-valgrind-sgcheck-am: check-valgrind-sgcheck-local clean: clean-am clean-am: clean-checkLTLIBRARIES clean-checkPROGRAMS clean-generic \ clean-installed_testLTLIBRARIES clean-installed_testPROGRAMS \ clean-libtool clean-noinstLTLIBRARIES clean-noinstPROGRAMS \ mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-installed_testLTLIBRARIES \ install-installed_testPROGRAMS install-installed_testSCRIPTS \ install-installed_test_metaDATA \ install-nobase_installed_testDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-installed_testLTLIBRARIES \ uninstall-installed_testPROGRAMS \ uninstall-installed_testSCRIPTS \ uninstall-installed_test_metaDATA \ uninstall-nobase_installed_testDATA .MAKE: all check check-am install install-am install-strip .PHONY: CTAGS GTAGS TAGS all all-am check check-TESTS check-am \ check-valgrind-am check-valgrind-drd-am \ check-valgrind-drd-local check-valgrind-helgrind-am \ check-valgrind-helgrind-local check-valgrind-local \ check-valgrind-memcheck-am check-valgrind-memcheck-local \ check-valgrind-sgcheck-am check-valgrind-sgcheck-local clean \ clean-checkLTLIBRARIES clean-checkPROGRAMS clean-generic \ clean-installed_testLTLIBRARIES clean-installed_testPROGRAMS \ clean-libtool clean-noinstLTLIBRARIES clean-noinstPROGRAMS \ cscopelist-am ctags ctags-am distclean distclean-compile \ distclean-generic distclean-libtool distclean-tags distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-installed_testLTLIBRARIES \ install-installed_testPROGRAMS install-installed_testSCRIPTS \ install-installed_test_metaDATA install-man \ install-nobase_installed_testDATA install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ recheck tags tags-am uninstall uninstall-am \ uninstall-installed_testLTLIBRARIES \ uninstall-installed_testPROGRAMS \ uninstall-installed_testSCRIPTS \ uninstall-installed_test_metaDATA \ uninstall-nobase_installed_testDATA @ENABLE_INSTALLED_TESTS_TRUE@%.test: %$(EXEEXT) Makefile @ENABLE_INSTALLED_TESTS_TRUE@ $(AM_V_GEN) (echo '[Test]' > $@.tmp; \ @ENABLE_INSTALLED_TESTS_TRUE@ echo 'Type=session' >> $@.tmp; \ @ENABLE_INSTALLED_TESTS_TRUE@ echo 'Exec=$(installed_testdir)/$(notdir $<) --tap' >> $@.tmp; \ @ENABLE_INSTALLED_TESTS_TRUE@ echo 'Output=TAP' >> $@.tmp; \ @ENABLE_INSTALLED_TESTS_TRUE@ mv $@.tmp $@) @VALGRIND_CHECK_RULES@ @CODE_COVERAGE_RULES@ # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: parlatype-1.5.4/libparlatype/tests/wavedata.c0000644000175000017500000000253313176574165016257 00000000000000/* Copyright (C) Gabor Karsay 2017 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #include #include static void wavedata_new (void) { PtWavedata *testdata1, *testdata2; float array[8] = {0.1, 0.1, 0.2, 0.2, 0.3, 0.3, 0.4, 0.4}; testdata1 = pt_wavedata_new (array, 8, 1, 100); testdata2 = pt_wavedata_copy (testdata1); g_assert (testdata1 == testdata1); pt_wavedata_free (testdata1); pt_wavedata_free (testdata2); /* There are no tests, bogus input is possible */ testdata1 = pt_wavedata_new (array, 123, 25, 34); pt_wavedata_free (testdata1); } int main (int argc, char *argv[]) { g_test_init (&argc, &argv, NULL); g_test_add_func ("/wavedata/new", wavedata_new); return g_test_run (); } parlatype-1.5.4/libparlatype/tests/waveviewer.c0000644000175000017500000000600213176574165016642 00000000000000/* Copyright (C) Gabor Karsay 2017 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #include #include #include static void waveviewer_empty (void) { GtkWidget *testviewer; gboolean fixed_cursor, follow_cursor, has_selection, show_ruler; gint64 selection_end, selection_start; testviewer = pt_waveviewer_new (); g_assert (PT_IS_WAVEVIEWER (testviewer)); g_object_get (testviewer, "fixed-cursor", &fixed_cursor, "follow-cursor", &follow_cursor, "has-selection", &has_selection, "show-ruler", &show_ruler, "selection-end", &selection_end, "selection-start", &selection_start, NULL); g_assert_true (fixed_cursor); g_assert_true (follow_cursor); g_assert_false (has_selection); g_assert_true (show_ruler); g_assert_cmpint (selection_end, ==, 0); g_assert_cmpint (selection_start, ==, 0); pt_waveviewer_set_follow_cursor (PT_WAVEVIEWER (testviewer), FALSE); g_assert_false (pt_waveviewer_get_follow_cursor (PT_WAVEVIEWER (testviewer))); gtk_widget_destroy (testviewer); } static gboolean stop_main (gpointer user_data) { gtk_main_quit (); return G_SOURCE_REMOVE; } static void waveviewer_loaded (void) { GError *error = NULL; PtPlayer *player; PtWavedata *data; GtkWidget *window; GtkWidget *viewer; gchar *testfile; gchar *testuri; gboolean success; player = pt_player_new (&error); g_assert_no_error (error); testfile = g_test_build_filename (G_TEST_DIST, "data/test1.ogg", NULL); testuri = g_strdup_printf ("file://%s", testfile); success = pt_player_open_uri (player, testuri, &error); g_assert_no_error (error); g_assert_true (success); data = pt_player_get_data (player, 100); viewer = pt_waveviewer_new (); window = gtk_window_new (GTK_WINDOW_TOPLEVEL); gtk_window_set_default_size (GTK_WINDOW (window), 300, 100); gtk_container_add (GTK_CONTAINER (window), viewer); gtk_widget_show_all (window); pt_waveviewer_set_wave (PT_WAVEVIEWER (viewer), data); pt_wavedata_free (data); g_timeout_add (200, stop_main, viewer); gtk_main (); g_free (testfile); g_free (testuri); g_object_unref (player); gtk_widget_destroy (window); } int main (int argc, char *argv[]) { g_test_init (&argc, &argv, NULL); g_test_add_func ("/waveviewer/empty", waveviewer_empty); g_test_add_func ("/waveviewer/loaded", waveviewer_loaded); gtk_init (NULL, NULL); return g_test_run (); } parlatype-1.5.4/libparlatype/tests/waveloader.c0000644000175000017500000000401513176574165016611 00000000000000/* Copyright (C) Gabor Karsay 2017 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #include #include static void waveloader_new (void) { /* test creation and property, everything else is tested indirectly via PtPlayer */ PtWaveloader *testloader; gchar *uri; testloader = pt_waveloader_new (NULL); g_assert (PT_IS_WAVELOADER (testloader)); g_object_get (testloader, "uri", &uri, NULL); g_assert_null (uri); g_object_unref (testloader); testloader = pt_waveloader_new ("file"); g_assert (PT_IS_WAVELOADER (testloader)); g_object_get (testloader, "uri", &uri, NULL); g_assert_cmpstr (uri, ==, "file"); g_free (uri); g_object_set (testloader, "uri", "some-other-file", NULL); g_object_get (testloader, "uri", &uri, NULL); g_assert_cmpstr (uri, ==, "some-other-file"); g_free (uri); /* Doesn't raise code coverage g_test_expect_message ("GLib-GObject", G_LOG_LEVEL_WARNING, "*has no property named*"); g_object_get (testloader, "not-a-property", &uri, NULL); g_test_assert_expected_messages (); g_test_expect_message ("GLib-GObject", G_LOG_LEVEL_WARNING, "*has no property named*"); g_object_set (testloader, "not-a-property", "fail", NULL); g_test_assert_expected_messages (); */ g_object_unref (testloader); } int main (int argc, char *argv[]) { g_test_init (&argc, &argv, NULL); g_test_add_func ("/waveloader/new", waveloader_new); return g_test_run (); } parlatype-1.5.4/libparlatype/tests/glib.supp0000644000175000017500000001621113176574165016143 00000000000000# GLib Valgrind suppressions file # # This provides a list of suppressions for all of GLib (including GIO), for all # Valgrind tools (memcheck, drd, helgrind, etc.) for the false positives and # deliberate one-time leaks which GLib causes to be reported when running under # Valgrind. # # When running an application which links to GLib under Valgrind, you can pass # this suppression file to Valgrind using --suppressions=/path/to/glib-2.0.supp. # # http://valgrind.org/docs/manual/manual-core.html#manual-core.suppress # # Note that there is currently no way for Valgrind to load this automatically # (https://bugs.kde.org/show_bug.cgi?id=160905), so the best GLib can currently # do is to install this file as part of its development package. # # This file should be updated if GLib introduces a new deliberate one-time leak, # or another false race positive in Valgrind: please file bugs at: # # https://bugzilla.gnome.org/enter_bug.cgi?product=glib { gnutls-init-calloc Memcheck:Leak fun:calloc ... fun:gtls_gnutls_init } { gnutls-init-realloc Memcheck:Leak fun:realloc ... fun:gtls_gnutls_init } { g-tls-backend-gnutls-init Memcheck:Leak fun:g_once_impl fun:g_tls_backend_gnutls_init } { p11-tokens-init Memcheck:Leak fun:calloc ... fun:create_tokens_inlock fun:initialize_module_inlock_reentrant } { gobject-init-malloc Memcheck:Leak fun:malloc ... fun:gobject_init_ctor } { gobject-init-realloc Memcheck:Leak fun:realloc ... fun:gobject_init_ctor } { gobject-init-calloc Memcheck:Leak fun:calloc ... fun:gobject_init_ctor } { g-type-register-dynamic Memcheck:Leak fun:malloc ... fun:g_type_register_dynamic } { g-type-register-static Memcheck:Leak fun:malloc ... fun:g_type_register_static } { g-type-register-static-realloc Memcheck:Leak fun:realloc ... fun:g_type_register_static } { g-type-register-static-calloc Memcheck:Leak fun:calloc ... fun:g_type_register_static } { g-type-add-interface-dynamic Memcheck:Leak fun:malloc ... fun:g_type_add_interface_dynamic } { g-type-add-interface-static Memcheck:Leak fun:malloc ... fun:g_type_add_interface_static } { g-test-rand-init Memcheck:Leak fun:calloc ... fun:g_rand_new_with_seed_array fun:test_run_seed ... fun:g_test_run } { g-test-rand-init2 Memcheck:Leak fun:calloc ... fun:g_rand_new_with_seed_array ... fun:get_global_random ... fun:g_test_init } { g-quark-table-new Memcheck:Leak fun:g_hash_table_new ... fun:quark_new } { g-quark-table-resize Memcheck:Leak fun:g_hash_table_resize ... fun:quark_new } { g-type-interface-init Memcheck:Leak fun:malloc ... fun:type_iface_vtable_base_init_Wm } { g-type-class-init Memcheck:Leak fun:calloc ... fun:type_class_init_Wm } { g-io-module-default-singleton-malloc Memcheck:Leak fun:malloc ... fun:g_type_create_instance ... fun:_g_io_module_get_default } { g-io-module-default-singleton-module Memcheck:Leak fun:calloc ... fun:g_module_open ... fun:_g_io_module_get_default } { g-get-language-names Memcheck:Leak fun:malloc ... fun:g_get_language_names } { g-static-mutex Memcheck:Leak fun:malloc ... fun:g_static_mutex_get_mutex_impl } { g-system-thread-init Memcheck:Leak fun:calloc ... fun:g_system_thread_new } { g-io-module-default-proxy-resolver-gnome Memcheck:Leak fun:calloc ... fun:g_proxy_resolver_gnome_init ... fun:_g_io_module_get_default } # memcheck checks that the third argument to ioctl() is a valid pointer, but # some ioctls use that argument as an integer { ioctl-with-non-pointer-param Memcheck:Param ioctl(generic) fun:ioctl fun:btrfs_reflink_with_progress } { g-private-get drd:ConflictingAccess fun:g_private_get } { g-private-get-helgrind Helgrind:Race fun:g_private_get } { g-private-set drd:ConflictingAccess fun:g_private_set } { g-private-set-helgrind Helgrind:Race fun:g_private_set } { g-type-construct-free drd:ConflictingAccess fun:g_type_free_instance } { g-type-construct-free-helgrind Helgrind:Race fun:g_type_free_instance } { g-variant-unref drd:ConflictingAccess fun:g_variant_unref } { g-variant-unref-helgrind Helgrind:Race fun:g_variant_unref } { g-unix-signals-main drd:ConflictingAccess fun:_g_main_create_unix_signal_watch } { g-unix-signals-dispatch drd:ConflictingAccess ... fun:dispatch_unix_signals* } { g-unix-signals-dispatch-helgrind Helgrind:Race ... fun:dispatch_unix_signals* } { g-unix-signals-other drd:ConflictingAccess fun:g_unix_signal_watch* } { g-unix-signals-other-helgrind Helgrind:Race fun:g_unix_signal_watch* } { g-unix-signals-handler drd:ConflictingAccess fun:g_unix_signal_handler* } { g-unix-signals-handler-helgrind Helgrind:Race fun:g_unix_signal_handler* } { g-unix-signals-worker drd:ConflictingAccess fun:glib_worker_main } { g-unix-signals-worker-helgrind Helgrind:Race fun:glib_worker_main } { g-wakeup-acknowledge drd:ConflictingAccess fun:read fun:g_wakeup_acknowledge } { g-type-fundamental drd:ConflictingAccess fun:g_type_fundamental } { g-type-fundamental-helgrind Helgrind:Race fun:g_type_fundamental } { g-type-class-peek-static drd:ConflictingAccess fun:g_type_class_peek_static } { g-type-class-peek-static-helgrind Helgrind:Race fun:g_type_class_peek_static } { g-type-is-a drd:ConflictingAccess ... fun:g_type_is_a } { g-type-is-a-helgrind Helgrind:Race ... fun:g_type_is_a } { g-inet-address-get-type drd:ConflictingAccess fun:g_inet_address_get_type } { g-inet-address-get-type-helgrind Helgrind:Race fun:g_inet_address_get_type } # From: https://github.com/fredericgermain/valgrind/blob/master/glibc-2.X-drd.supp { drd-libc-stdio drd:ConflictingAccess obj:*/lib*/libc-* } { drd-libc-recv drd:ConflictingAccess fun:recv } { drd-libc-send drd:ConflictingAccess fun:send } # GSources do an opportunistic ref count check { g-source-set-ready-time drd:ConflictingAccess fun:g_source_set_ready_time } { g-source-set-ready-time-helgrind Helgrind:Race fun:g_source_set_ready_time } { g-source-iter-next Helgrind:Race fun:g_source_iter_next fun:g_main_context_* fun:g_main_context_iterate } { g-object-instance-private drd:ConflictingAccess fun:*_get_instance_private } { g-object-instance-private-helgrind Helgrind:Race fun:*_get_instance_private } # GLib legitimately calls pthread_cond_signal without a mutex held { g-task-thread-complete drd:CondErr ... fun:g_cond_signal fun:g_task_thread_complete } { g-task-thread-complete Helgrind:Misc ... fun:g_cond_signal fun:g_task_thread_complete } # False positive, but I can't explain how (FIXME) { g-task-cond Helgrind:Misc ... fun:g_cond_clear fun:g_task_finalize } # Real race, but is_cancelled() is an opportunistic function anyway { g-cancellable-is-cancelled Helgrind:Race fun:g_cancellable_is_cancelled } # False positive { g-main-context-cond Helgrind:Misc ... fun:g_cond_clear fun:g_main_context_unref } # False positives { g-source-unlocked Helgrind:Race fun:g_source_*_unlocked } { g-source-internal Helgrind:Race fun:g_source_*_internal } # False positive { g_object_real_dispose Helgrind:Race fun:g_object_real_dispose } # False positive { g_object_new_valist Helgrind:Race ... fun:g_object_new_valist } parlatype-1.5.4/libparlatype/tests/player.c0000644000175000017500000002772213176574165015766 00000000000000/* Copyright (C) Gabor Karsay 2017 * * This program is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published * by the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . */ #include #include /* error domain */ #include typedef struct { PtPlayer *testplayer; gchar *testfile; gchar *testuri; } PtPlayerFixture; static void pt_player_fixture_set_up (PtPlayerFixture *fixture, gconstpointer user_data) { GError *error = NULL; fixture->testplayer = NULL; gchar *path; GFile *file; gchar *testfile; gchar *testuri; gboolean success; fixture->testplayer = pt_player_new (&error); g_assert_no_error (error); path = g_test_build_filename (G_TEST_DIST, "data", "test1.ogg", NULL); /* In make distcheck the path is something like /_build/../data/test1.ogg". Although this works we need a "pretty" path to compare and assert it's the same. To get rid of the "/_build/.." take a detour using GFile. */ file = g_file_new_for_path (path); fixture->testfile = g_file_get_path (file); fixture->testuri = g_file_get_uri (file); success = pt_player_open_uri (fixture->testplayer, fixture->testuri, &error); g_assert_no_error (error); g_assert_true (success); g_object_unref (file); g_free (path); } static void pt_player_fixture_tear_down (PtPlayerFixture *fixture, gconstpointer user_data) { g_clear_object (&fixture->testplayer); g_free (fixture->testfile); g_free (fixture->testuri); } static void player_new (void) { /* create new PtPlayer and test initial properties */ GError *error = NULL; PtPlayer *testplayer; gdouble speed, volume; testplayer = pt_player_new (&error); g_assert_no_error (error); g_assert (PT_IS_PLAYER (testplayer)); g_object_get (testplayer, "speed", &speed, "volume", &volume, NULL); g_assert_cmpfloat (speed, ==, 1.0); g_assert_cmpfloat (volume, ==, 1.0); g_object_unref (testplayer); } static void player_open_fail (void) { GError *error = NULL; PtPlayer *testplayer; gboolean success; gchar *path; GFile *file; gchar *uri; testplayer = pt_player_new (&error); g_assert_no_error (error); success = pt_player_open_uri (testplayer, "foo", &error); g_assert_error (error, GST_RESOURCE_ERROR, GST_RESOURCE_ERROR_NOT_FOUND); g_assert_false (success); g_clear_error (&error); path = g_test_build_filename (G_TEST_DIST, "data", "foo", NULL); file = g_file_new_for_path (path); uri = g_file_get_uri (file); success = pt_player_open_uri (testplayer, uri, &error); g_assert_error (error, GST_RESOURCE_ERROR, GST_RESOURCE_ERROR_NOT_FOUND); g_assert_false (success); g_clear_error (&error); g_object_unref (file); g_free (path); g_free (uri); path = g_test_build_filename (G_TEST_DIST, "data", "README", NULL); file = g_file_new_for_path (path); uri = g_file_get_uri (file); success = pt_player_open_uri (testplayer, uri, &error); g_assert_error (error, GST_STREAM_ERROR, GST_STREAM_ERROR_WRONG_TYPE); g_assert_false (success); g_clear_error (&error); g_object_unref (file); g_free (path); g_free (uri); g_object_unref (testplayer); } static void player_open_ogg (PtPlayerFixture *fixture, gconstpointer user_data) { /* open test file, get and check uri and filename */ gchar *getchar; getchar = pt_player_get_uri (fixture->testplayer); g_assert_cmpstr (getchar, ==, fixture->testuri); g_free (getchar); getchar = pt_player_get_filename (fixture->testplayer); g_assert_cmpstr (getchar, ==, "test1.ogg"); g_free (getchar); } typedef struct { GAsyncResult *res; GMainLoop *loop; } SyncData; static void quit_loop_cb (PtPlayer *player, GAsyncResult *res, gpointer user_data) { SyncData *data = user_data; data->res = g_object_ref (res); g_main_loop_quit (data->loop); } static void player_open_cancel (void) { /* open test file async and cancel operation */ GError *error = NULL; PtPlayer *testplayer; gchar *testfile; gchar *testuri; gboolean success; SyncData data; GMainContext *context; context = g_main_context_new (); g_main_context_push_thread_default (context); data.loop = g_main_loop_new (context, FALSE); data.res = NULL; testplayer = pt_player_new (&error); g_assert_no_error (error); testfile = g_test_build_filename (G_TEST_DIST, "data/test1.ogg", NULL); testuri = g_strdup_printf ("file://%s", testfile); pt_player_open_uri_async (testplayer, testuri, (GAsyncReadyCallback) quit_loop_cb, &data); pt_player_cancel (testplayer); g_main_loop_run (data.loop); success = pt_player_open_uri_finish (testplayer, data.res, &error); g_assert_false (success); g_assert_error (error, G_IO_ERROR, G_IO_ERROR_CANCELLED); g_free (testfile); g_free (testuri); g_object_unref (testplayer); g_main_loop_unref (data.loop); } static void player_timestamps (PtPlayerFixture *fixture, gconstpointer user_data) { gchar *timestamp = NULL; gchar *timestamp2; gboolean valid; /* valid timestamps */ g_assert_true (pt_player_string_is_timestamp (fixture->testplayer, "#0:01.2#")); g_assert_true (pt_player_string_is_timestamp (fixture->testplayer, "0:01.2")); /* too many digits */ g_assert_false (pt_player_string_is_timestamp (fixture->testplayer, "#0:01.20#")); g_assert_false (pt_player_string_is_timestamp (fixture->testplayer, "#0:001.2#")); /* sec >= 60 */ g_assert_false (pt_player_string_is_timestamp (fixture->testplayer, "#0:71.2#")); /* not enough digits */ g_assert_false (pt_player_string_is_timestamp (fixture->testplayer, "#:01.2#")); g_assert_false (pt_player_string_is_timestamp (fixture->testplayer, "#0:1.2#")); /* wrong delimiters */ g_assert_false (pt_player_string_is_timestamp (fixture->testplayer, "#0.01.2#")); g_assert_false (pt_player_string_is_timestamp (fixture->testplayer, "#0:01:2#")); /* too big, not valid in the test file */ g_assert_false (pt_player_string_is_timestamp (fixture->testplayer, "#01:00.0#")); pt_player_jump_to_position (fixture->testplayer, 1000); timestamp = pt_player_get_timestamp (fixture->testplayer); g_assert_nonnull (timestamp); valid = pt_player_string_is_timestamp (fixture->testplayer, timestamp); g_assert_true (valid); pt_player_jump_to_position (fixture->testplayer, 0); timestamp2 = pt_player_get_timestamp (fixture->testplayer); g_assert_cmpstr (timestamp, !=, timestamp2); g_free (timestamp2); pt_player_goto_timestamp (fixture->testplayer, timestamp); timestamp2 = pt_player_get_timestamp (fixture->testplayer); g_assert_cmpstr (timestamp, ==, timestamp2); g_free (timestamp); g_free (timestamp2); } static void player_volume_speed (PtPlayerFixture *fixture, gconstpointer user_data) { /* set speed and volume properties */ GError *error = NULL; PtPlayer *bind_player; gdouble speed, volume; pt_player_set_volume (fixture->testplayer, 0.7); pt_player_set_speed (fixture->testplayer, 0.7); g_object_get (fixture->testplayer, "speed", &speed, "volume", &volume, NULL); g_assert_cmpfloat (volume, ==, 0.7); g_assert_cmpfloat (speed, ==, 0.7); /* mute doesn't change the volume */ pt_player_mute_volume (fixture->testplayer, TRUE); g_object_get (fixture->testplayer, "volume", &volume, NULL); g_assert_cmpfloat (volume, ==, 0.7); pt_player_mute_volume (fixture->testplayer, FALSE); g_object_get (fixture->testplayer, "volume", &volume, NULL); g_assert_cmpfloat (volume, ==, 0.7); /* check bind property */ bind_player = pt_player_new (&error); g_assert_no_error (error); g_object_bind_property (fixture->testplayer, "volume", bind_player, "volume", G_BINDING_DEFAULT); g_object_bind_property (fixture->testplayer, "speed", bind_player, "speed", G_BINDING_DEFAULT); pt_player_set_volume (fixture->testplayer, 0.5); pt_player_set_speed (fixture->testplayer, 0.5); g_object_get (bind_player, "speed", &speed, "volume", &volume, NULL); g_assert_cmpfloat (volume, ==, 0.5); g_assert_cmpfloat (speed, ==, 0.5); g_object_unref (bind_player); } static void player_timestrings (PtPlayerFixture *fixture, gconstpointer user_data) { gchar *timestring; /* check time strings at current position */ pt_player_jump_to_position (fixture->testplayer, 1000); timestring = pt_player_get_current_time_string (fixture->testplayer, PT_PRECISION_SECOND); g_assert_cmpstr (timestring, ==, "0:01"); g_free (timestring); timestring = pt_player_get_current_time_string (fixture->testplayer, PT_PRECISION_SECOND_10TH); g_assert_cmpstr (timestring, ==, "0:01.0"); g_free (timestring); timestring = pt_player_get_current_time_string (fixture->testplayer, PT_PRECISION_SECOND_100TH); g_assert_cmpstr (timestring, ==, "0:01.00"); g_free (timestring); /* check duration time strings for given test file */ timestring = pt_player_get_duration_time_string (fixture->testplayer, PT_PRECISION_SECOND); g_assert_cmpstr (timestring, ==, "0:10"); g_free (timestring); timestring = pt_player_get_duration_time_string (fixture->testplayer, PT_PRECISION_SECOND_10TH); g_assert_cmpstr (timestring, ==, "0:10.0"); g_free (timestring); timestring = pt_player_get_duration_time_string (fixture->testplayer, PT_PRECISION_SECOND_100TH); g_assert_cmpstr (timestring, ==, "0:10.06"); g_free (timestring); /* check arbitrary time strings, duration < 10 min, no rounding */ timestring = pt_player_get_time_string (1560, 10000, PT_PRECISION_SECOND); g_assert_cmpstr (timestring, ==, "0:01"); g_free (timestring); timestring = pt_player_get_time_string (1560, 10000, PT_PRECISION_SECOND_10TH); g_assert_cmpstr (timestring, ==, "0:01.5"); g_free (timestring); timestring = pt_player_get_time_string (1560, 10000, PT_PRECISION_SECOND_100TH); g_assert_cmpstr (timestring, ==, "0:01.56"); g_free (timestring); /* duration >= 10 min */ timestring = pt_player_get_time_string (1560, 600000, PT_PRECISION_SECOND); g_assert_cmpstr (timestring, ==, "00:01"); g_free (timestring); timestring = pt_player_get_time_string (1560, 600000, PT_PRECISION_SECOND_10TH); g_assert_cmpstr (timestring, ==, "00:01.5"); g_free (timestring); timestring = pt_player_get_time_string (1560, 600000, PT_PRECISION_SECOND_100TH); g_assert_cmpstr (timestring, ==, "00:01.56"); g_free (timestring); /* duration >= 1 hour */ timestring = pt_player_get_time_string (1560, 3600000, PT_PRECISION_SECOND); g_assert_cmpstr (timestring, ==, "0:00:01"); g_free (timestring); timestring = pt_player_get_time_string (1560, 3600000, PT_PRECISION_SECOND_10TH); g_assert_cmpstr (timestring, ==, "0:00:01.5"); g_free (timestring); timestring = pt_player_get_time_string (1560, 3600000, PT_PRECISION_SECOND_100TH); g_assert_cmpstr (timestring, ==, "0:00:01.56"); g_free (timestring); } int main (int argc, char *argv[]) { g_test_init (&argc, &argv, NULL); g_test_add_func ("/player/new", player_new); g_test_add_func ("/player/open-fail", player_open_fail); g_test_add ("/player/open-ogg", PtPlayerFixture, NULL, pt_player_fixture_set_up, player_open_ogg, pt_player_fixture_tear_down); g_test_add_func ("/player/open-cancel", player_open_cancel); g_test_add ("/player/timestamps", PtPlayerFixture, NULL, pt_player_fixture_set_up, player_timestamps, pt_player_fixture_tear_down); g_test_add ("/player/volume_speed", PtPlayerFixture, NULL, pt_player_fixture_set_up, player_volume_speed, pt_player_fixture_tear_down); g_test_add ("/player/timestrings", PtPlayerFixture, NULL, pt_player_fixture_set_up, player_timestrings, pt_player_fixture_tear_down); return g_test_run (); } parlatype-1.5.4/libparlatype/tests/gst.supp0000644000175000017500000021561113176574165016030 00000000000000### this file contains suppressions for valgrind when running ### the gstreamer unit tests ### it might be useful for wider use as well ### syscall suppressions { Memcheck:Param clone(parent_tidptr) fun:clone fun:clone } { Memcheck:Param clone(child_tidptr) fun:clone fun:clone } { Memcheck:Param clone(tlsinfo) fun:clone fun:clone } ### glibc suppressions { Memcheck:Cond obj:/lib/ld-2.*.so fun:dl_open_worker obj:/lib/ld-2.*.so fun:_dl_open fun:dlopen_doit obj:/lib/ld-2.*.so fun:_dlerror_run fun:dlopen fun:g_module_open fun:gst_plugin_load_file } { Memcheck:Cond fun:strlen fun:fillin_rpath fun:_dl_init_paths fun:dl_main fun:_dl_sysdep_start fun:_dl_start obj:/lib64/ld-2.*.so obj:* obj:* } { Memcheck:Cond fun:_dl_relocate_object fun:dl_main fun:_dl_sysdep_start fun:_dl_start } { Memcheck:Cond fun:* fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen@@GLIBC_2.2.5 } # glibc does not deallocate thread-local storage { Memcheck:Leak fun:calloc fun:_dl_allocate_tls fun:pthread_create@@* } { Memcheck:Leak fun:calloc fun:allocate_dtv fun:_dl_allocate_tls } # I get an extra stack entry on x86/dapper { Memcheck:Leak fun:calloc obj:/lib/ld-2.3.*.so fun:_dl_allocate_tls fun:pthread_create@@* } { Memcheck:Cond fun:strstr fun:__pthread_initialize_minimal obj:/lib/libpthread-*.so obj:/lib/libpthread-*.so fun:call_init fun:_dl_init obj:/lib/ld-*.so } # a thread-related free problem in glibc from Edgard { __libc_freeres_rw_acess Memcheck:Addr4 obj:* obj:* obj:* obj:* obj:* fun:__libc_freeres } { Memcheck:Cond obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so } # g_module_open-related problems { Memcheck:Addr2 fun:memcpy fun:_dl_map_object_deps fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen@@GLIBC_2.1 fun:g_module_open fun:gst_plugin_load_file fun:gst_registry_scan_path_level fun:gst_registry_scan_path_level fun:gst_registry_scan_path_level fun:init_post fun:g_option_context_parse fun:gst_init_check fun:gst_init fun:gst_check_init fun:main } { Memcheck:Addr4 fun:memcpy fun:_dl_map_object_deps fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen@@GLIBC_2.1 fun:g_module_open fun:gst_plugin_load_file fun:gst_registry_scan_path_level fun:gst_registry_scan_path_level fun:gst_registry_scan_path_level fun:init_post fun:g_option_context_parse fun:gst_init_check fun:gst_init fun:gst_check_init fun:main } { Memcheck:Cond obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so fun:do_sym fun:_dl_sym fun:dlsym_doit obj:/lib/ld-2.3.*.so fun:_dlerror_run fun:dlsym fun:g_module_symbol fun:g_module_open fun:gst_plugin_load_file } { Memcheck:Cond obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so fun:dl_open_worker obj:/lib/ld-2.3.*.so fun:_dl_open fun:dlopen_doit obj:/lib/ld-2.3.*.so fun:_dlerror_run fun:dlopen@@GLIBC_2.1 fun:g_module_open fun:gst_plugin_load_file } { Memcheck:Cond obj:/lib/ld-2.3.*.so fun:dl_open_worker obj:/lib/ld-2.3.*.so fun:_dl_open fun:dlopen_doit obj:/lib/ld-2.3.*.so fun:_dlerror_run fun:dlopen@@GLIBC_2.1 fun:g_module_open fun:gst_plugin_load_file fun:gst_plugin_load_by_name fun:gst_plugin_feature_load } { Memcheck:Leak fun:malloc obj:/lib/ld-2.3.*.so fun:dl_open_worker obj:/lib/ld-2.3.*.so fun:_dl_open fun:dlopen_doit obj:/lib/ld-2.3.*.so fun:_dlerror_run fun:dlopen@@GLIBC_2.1 fun:g_module_open fun:gst_plugin_load_file fun:gst_plugin_load_by_name } { Memcheck:Addr4 obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so fun:dl_open_worker obj:/lib/ld-2.3.*.so fun:_dl_open fun:dlopen_doit obj:/lib/ld-2.3.*.so } { Memcheck:Addr4 obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so fun:dl_open_worker obj:/lib/ld-2.3.*.so fun:_dl_open fun:dlopen_doit obj:/lib/ld-2.3.*.so fun:_dlerror_run } { Memcheck:Addr4 obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so fun:dl_open_worker obj:/lib/ld-2.3.*.so fun:_dl_open fun:dlopen_doit obj:/lib/ld-2.3.*.so fun:_dlerror_run fun:dlopen@@GLIBC_2.1 fun:g_module_open } { Memcheck:Addr4 obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so fun:dl_open_worker obj:/lib/ld-2.3.*.so fun:_dl_open fun:dlopen_doit obj:/lib/ld-2.3.*.so fun:_dlerror_run fun:dlopen@@GLIBC_2.1 fun:g_module_open } { Memcheck:Addr4 obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so fun:do_sym fun:_dl_sym fun:dlsym_doit obj:/lib/ld-2.3.*.so fun:_dlerror_run fun:dlsym fun:g_module_symbol fun:g_module_open } { Memcheck:Param futex(uaddr2) fun:pthread_once obj:/lib/libc-2.3.*.so obj:/lib/libc-2.3.*.so fun:mbsnrtowcs fun:vfprintf fun:vsprintf fun:sprintf obj:/lib/libc-2.3.*.so fun:tmpfile fun:setup_pipe fun:setup_messaging_with_key fun:setup_messaging } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so fun:dlopen fun:g_module_open } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libc-2.7.so fun:_dl_sym obj:/lib/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so fun:dlsym fun:g_module_symbol fun:g_module_open } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so fun:dlopen fun:g_module_open } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so fun:dlopen fun:g_module_open } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so fun:dlopen fun:g_module_open } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libc-2.7.so obj:/lib/ld-2.7.so fun:__libc_dlopen_mode } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libc-2.7.so obj:/lib/ld-2.7.so fun:__libc_dlopen_mode } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libc-2.7.so obj:/lib/ld-2.7.so fun:__libc_dlopen_mode obj:/lib/i686/cmov/libc-2.7.so obj:/lib/i686/cmov/libc-2.7.so obj:/lib/i686/cmov/libc-2.7.so obj:/lib/i686/cmov/libc-2.7.so obj:/lib/i686/cmov/libc-2.7.so fun:iconv_open } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libc-2.7.so obj:/lib/ld-2.7.so fun:__libc_dlopen_mode obj:/lib/i686/cmov/libc-2.7.so obj:/lib/i686/cmov/libc-2.7.so obj:/lib/i686/cmov/libc-2.7.so obj:/lib/i686/cmov/libc-2.7.so obj:/lib/i686/cmov/libc-2.7.so fun:iconv_open } { Memcheck:Addr8 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/libc-2.7.so obj:/lib/ld-2.7.so fun:__libc_dlopen_mode obj:/lib/libc-2.7.so obj:/lib/libc-2.7.so obj:/lib/libc-2.7.so obj:/lib/libc-2.7.so obj:/lib/libc-2.7.so fun:iconv_open } { Memcheck:Addr8 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/libc-2.7.so obj:/lib/ld-2.7.so fun:__libc_dlopen_mode obj:/lib/libc-2.7.so obj:/lib/libc-2.7.so obj:/lib/libc-2.7.so obj:/lib/libc-2.7.so obj:/lib/libc-2.7.so fun:iconv_open } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so fun:dlopen } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so fun:dlopen } { Memcheck:Addr8 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/libc-2.7.so obj:/lib/ld-2.7.so fun:__libc_dlopen_mode } { Memcheck:Cond obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so fun:dlopen } { Memcheck:Cond obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so fun:dlopen } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so fun:dlopen } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so fun:dlopen } { Memcheck:Cond obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so fun:dlopen } { Memcheck:Cond obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so fun:dlopen } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so fun:dlopen } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so fun:dlopen } { Memcheck:Cond obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so fun:dlopen } { Memcheck:Cond obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so fun:dlopen } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/i686/cmov/libdl-2.7.so fun:dlopen } # suppression for a glibc bug: # http://valgrind.org/docs/manual/faq.html#faq.exit_errors> { Memcheck:Free fun:free obj:*libc-*.so fun:__libc_freeres fun:* fun:_Exit } # same as above, just so it works for tpm on gutsy/x86-64 { Memcheck:Free fun:free fun:free_mem fun:__libc_freeres } # valgrind doesn't allow me to specify a suppression for Addr1, Addr2, Addr4 # as Addr*, so 3 copies for that; and then 2 of each for that pesky memcpy { Memcheck:Addr1 fun:_dl_signal_error fun:_dl_map_object_deps fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen@@GLIBC_2.1 fun:g_module_open } { Memcheck:Addr2 fun:_dl_signal_error fun:_dl_map_object_deps fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen@@GLIBC_2.1 fun:g_module_open } { Memcheck:Addr4 fun:_dl_signal_error fun:_dl_map_object_deps fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen@@GLIBC_2.1 fun:g_module_open } { Memcheck:Addr1 fun:memcpy fun:_dl_signal_error fun:_dl_map_object_deps fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen@@GLIBC_2.1 fun:g_module_open } { Memcheck:Addr2 fun:memcpy fun:_dl_signal_error fun:_dl_map_object_deps fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen@@GLIBC_2.1 fun:g_module_open } { Memcheck:Addr4 fun:memcpy fun:_dl_signal_error fun:_dl_map_object_deps fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen@@GLIBC_2.1 fun:g_module_open } { Memcheck:Addr8 obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/libc-2.3.*.so obj:/lib/ld-2.3.*.so fun:_dl_open obj:/lib/libdl-2.3.*.so obj:/lib/ld-2.3.*.so } { Memcheck:Cond obj:/lib/ld-2.3.*.so obj:/lib/libc-2.3.*.so obj:/lib/ld-2.3.*.so fun:_dl_open obj:/lib/libdl-2.3.*.so obj:/lib/ld-2.3.*.so obj:/lib/libdl-2.3.*.so fun:dlopen fun:g_module_open fun:gst_plugin_load_file fun:gst_plugin_load_by_name fun:gst_plugin_feature_load } { Memcheck:Addr4 obj:/lib/ld-2.3.6.so obj:/lib/ld-2.3.6.so obj:/lib/tls/i686/cmov/libc-2.3.6.so obj:/lib/ld-2.3.6.so fun:_dl_open obj:/lib/tls/i686/cmov/libdl-2.3.6.so obj:/lib/ld-2.3.6.so obj:/lib/tls/i686/cmov/libdl-2.3.6.so fun:dlopen } { Memcheck:Cond obj:/lib/ld-2.3.6.so obj:/lib/tls/i686/cmov/libc-2.3.6.so obj:/lib/ld-2.3.6.so fun:_dl_open obj:/lib/tls/i686/cmov/libdl-2.3.6.so obj:/lib/ld-2.3.6.so obj:/lib/tls/i686/cmov/libdl-2.3.6.so fun:dlopen } { Memcheck:Cond obj:/lib/ld-2.3.6.so obj:/lib/ld-2.3.6.so obj:/lib/ld-2.3.6.so obj:/lib/tls/i686/cmov/libc-2.3.6.so obj:/lib/ld-2.3.6.so fun:_dl_open obj:/lib/tls/i686/cmov/libdl-2.3.6.so obj:/lib/ld-2.3.6.so obj:/lib/tls/i686/cmov/libdl-2.3.6.so fun:dlopen } ### glib suppressions { Memcheck:Cond fun:g_parse_debug_string obj:/usr/lib*/libglib-2.0.so.* fun:g_slice_alloc fun:g_slice_alloc0 } { Memcheck:Leak fun:*alloc ... fun:g_type_init* fun:init_pre* } { Memcheck:Leak fun:*alloc ... fun:g_type_register_fundamental } { Memcheck:Leak fun:malloc fun:realloc fun:g_realloc fun:type_node_any_new_W } { Memcheck:Leak fun:realloc fun:g_realloc fun:type_node_any_new_W } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:g_type_class_ref } { Memcheck:Leak fun:malloc fun:realloc fun:g_realloc fun:type_add_flags_W } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:type_add_flags_W } #pthread memleaks { Thread creation leak Memcheck:Leak fun:calloc fun:allocate_dtv fun:_dl_allocate* fun:_dl_allocate* fun:__pthread_initialize_minimal } { Thread management leak Memcheck:Leak fun:calloc fun:allocate_dtv fun:_dl_allocate* fun:_dl_allocate* fun:__pthread_* } { Thread management leak 2 Memcheck:Leak fun:memalign fun:_dl_allocate* fun:_dl_allocate* fun:__pthread_* } { pthread_create Syscall param write(buf) points to uninitialised byte(s) Memcheck:Param write(buf) fun:pthread_create@@GLIBC_2.2.5 fun:g_thread_create* } # nss_parse_* memleak (used by g_option_context_parse) { nss_parse_* memleak Memcheck:Leak fun:malloc fun:nss_parse_service_list fun:__nss_database_lookup } # liboil suppressions { Memcheck:Value8 obj:/usr/lib/liboil-0.3.so.0.1.0 obj:/usr/lib/liboil-0.3.so.0.1.0 obj:/usr/lib/liboil-0.3.so.0.1.0 fun:oil_cpu_fault_check_try fun:oil_test_check_impl fun:oil_class_optimize fun:oil_optimize_all fun:oil_init } { Memcheck:Addr8 obj:/lib/ld-2.3.6.so } { Memcheck:Param futex(uaddr2) fun:pthread_once obj:/lib/libc-2.3.6.so obj:/lib/libc-2.3.6.so fun:setlocale fun:init_pre fun:g_option_context_parse fun:gst_init_check fun:gst_init fun:gst_check_init fun:main } { Memcheck:Cond obj:/lib/ld-2.3.6.so obj:/lib/ld-2.3.6.so fun:_dl_open obj:/lib/libdl-2.3.6.so obj:/lib/ld-2.3.6.so obj:/lib/libdl-2.3.6.so fun:dlopen fun:g_module_open fun:gst_plugin_load_file } # this exists in a bunch of different variations, hence the short tail/trace { Memcheck:Addr4 obj:/lib/ld-2.4.so obj:/lib/ld-2.4.so } { Memcheck:Addr8 obj:/lib/ld-2.4.so obj:/lib/ld-2.4.so } # More edgy suppressions (Mike) { Memcheck:Cond obj:/lib/ld-2.4.so obj:/lib/ld-2.4.so obj:/lib/ld-2.4.so obj:/lib/ld-2.4.so fun:dlopen_doit obj:/lib/ld-2.4.so fun:_dlerror_run fun:dlopen@@GLIBC_2.1 } { Memcheck:Cond obj:/lib/ld-2.4.so obj:/lib/ld-2.4.so obj:/lib/ld-2.4.so obj:/lib/ld-2.4.so obj:/lib/ld-2.4.so obj:/lib/ld-2.4.so fun:dlopen_doit obj:/lib/ld-2.4.so fun:_dlerror_run fun:dlopen@@GLIBC_2.1 } { Memcheck:Cond obj:/lib/ld-2.4.so obj:/lib/ld-2.4.so obj:/lib/ld-2.4.so fun:do_sym fun:_dl_sym } # This one's overly general, but there's zero other information in the stack # trace - just these five lines! { Memcheck:Cond obj:/lib/ld-2.4.so obj:/lib/ld-2.4.so obj:/lib/ld-2.4.so obj:/lib/ld-2.4.so obj:/lib/ld-2.4.so } { Memcheck:Leak fun:calloc obj:/lib/ld-2.4.so fun:_dl_allocate_tls fun:pthread_create@@GLIBC_2.1 } # TLS leaks for feisty/x86 { Memcheck:Leak fun:calloc fun:allocate_dtv fun:_dl_allocate_tls fun:pthread_create@@GLIBC_2.1 } { Memcheck:Leak fun:calloc obj:/usr/lib/libcdio.so.6.0.1 fun:cdio_open_am_linux obj:/usr/lib/libcdio.so.6.0.1 fun:cdio_open_am } { Memcheck:Addr8 obj:/lib/ld-2.5.so } { Memcheck:Cond fun:snd_pcm_direct_shm_create_or_connect fun:snd_pcm_dsnoop_open fun:_snd_pcm_dsnoop_open obj:/*lib/libasound.so.2.0.0 obj:/*lib/libasound.so.2.0.0 fun:snd_pcm_open_slave fun:_snd_pcm_plug_open obj:/*lib/libasound.so.2.0.0 fun:snd_pcm_open_slave fun:_snd_pcm_asym_open obj:/*lib/libasound.so.2.0.0 obj:/*lib/libasound.so.2.0.0 } { Memcheck:Cond fun:snd*_pcm_hw_param_set_near } { Memcheck:Cond ... fun:snd*_pcm_hw_param_set_near } { Memcheck:Cond obj:/*lib/libasound.so.2.0.0 obj:/*lib/libasound.so.2.0.0 fun:snd_pcm_close obj:/*lib/libasound.so.2.0.0 } { Memcheck:Cond fun:snd_pcm_direct_shm_create_or_connect fun:snd_pcm_dmix_open fun:_snd_pcm_dmix_open obj:/*lib/libasound.so.2.0.0 obj:/*lib/libasound.so.2.0.0 fun:snd_pcm_open_slave fun:_snd_pcm_softvol_open obj:/*lib/libasound.so.2.0.0 fun:snd_pcm_open_slave fun:_snd_pcm_plug_open obj:/*lib/libasound.so.2.0.0 fun:snd_pcm_open_slave fun:_snd_pcm_asym_open obj:/*lib/libasound.so.2.0.0 obj:/*lib/libasound.so.2.0.0 } { Memcheck:Leak fun:malloc fun:strdup fun:snd_dlobj_cache_add obj:/*lib/libasound.so.2.0.0 fun:snd_pcm_open_slave fun:snd_pcm_dsnoop_open fun:_snd_pcm_dsnoop_open obj:/*lib/libasound.so.2.0.0 obj:/*lib/libasound.so.2.0.0 fun:snd_pcm_open_slave fun:_snd_pcm_plug_open obj:/*lib/libasound.so.2.0.0 fun:snd_pcm_open_slave fun:_snd_pcm_asym_open obj:/*lib/libasound.so.2.0.0 obj:/*lib/libasound.so.2.0.0 } # Catch about 15 variations on inserting info into an ALSA # internal cache { Memcheck:Leak fun:malloc ... fun:snd*_dlobj_cache_add obj:/*lib*/libasound.so.2.0.0 } { Memcheck:Leak fun:*alloc ... fun:snd_pcm_open_conf } { Memcheck:Leak fun:*alloc obj:/*lib*/libasound.so.2.0.0 ... fun:snd_config_hook_load } { Memcheck:Leak fun:*alloc obj:/*lib*/libasound.so.2.0.0 ... fun:snd_config_update_r fun:snd_config_update } { Memcheck:Leak fun:*alloc fun:strdup ... fun:snd_config_update_r fun:snd_config_update } { Memcheck:Leak fun:*alloc fun:_dl_close_worker ... fun:snd_config_searcha_hooks } { Memcheck:Leak fun:malloc obj:/lib/libc*.so fun:__nss_database_lookup obj:* obj:* fun:getgrnam_r fun:getgrnam fun:snd_pcm_direct_parse_open_conf } { Memcheck:Leak fun:calloc fun:_XCBInitDisplayLock fun:XOpenDisplay } # GConf internal initialisations related to getting the default client. { Memcheck:Leak fun:calloc fun:g_malloc0 fun:ORBit_alloc_tcval obj:/usr/lib/libORBit-2.so.* fun:ORBit_demarshal_IOR fun:ORBit_demarshal_object fun:CORBA_ORB_string_to_object obj:/usr/lib/libgconf-2.so.* fun:gconf_get_current_lock_holder fun:gconf_activate_server obj:/usr/lib/libgconf-2.so.* obj:/usr/lib/libgconf-2.so.* fun:gconf_engine_get_default } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:ORBit_alloc_tcval obj:* fun:PortableServer_POA_servant_to_reference fun:* fun:* fun:* fun:gconf_engine_get_default } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:ORBit_alloc_tcval obj:/usr/lib/libORBit-2.so.* fun:ORBit_demarshal_IOR fun:ORBit_demarshal_object fun:CORBA_ORB_string_to_object obj:/usr/lib/libgconf-2.so.* fun:gconf_get_current_lock_holder fun:gconf_activate_server obj:/usr/lib/libgconf-2.so.* obj:/usr/lib/libgconf-2.so.* fun:gconf_engine_get_default } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:ORBit_alloc* fun:* fun:ORBit_demarshal_IOR fun:ORBit_demarshal_object fun:ORBit_demarshal_value fun:* fun:ORBit_small_invoke_stub fun:ConfigServer_get_default_database fun:* fun:gconf_engine_get_default } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:ORBit_alloc* fun:* fun:IOP_generate_profiles fun:ORBit_marshal_object fun:ORBit_marshal_value fun:* fun:ORBit_small_invoke_stub fun:ConfigServer_add_client fun:* fun:* fun:gconf_engine_get_default } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:ORBit_alloc_by_tc fun:* fun:PortableServer_POA_servant_to_reference fun:* fun:* fun:* fun:gconf_engine_get_default } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:ORBit_alloc_by_tc obj:/usr/lib/libORBit-2.so.* fun:ORBit_demarshal_IOR fun:ORBit_demarshal_object fun:CORBA_ORB_string_to_object obj:/usr/lib/libgconf-2.so.* fun:gconf_get_current_lock_holder fun:gconf_activate_server obj:/usr/lib/libgconf-2.so.* obj:/usr/lib/libgconf-2.so.* fun:gconf_engine_get_default } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:ORBit_alloc* fun:* fun:ORBit_demarshal_IOR fun:ORBit_demarshal_object fun:* fun:* fun:gconf_activate_server } # Some libORBit/bonobo initialisation stuff { Memcheck:Leak fun:malloc fun:g_malloc fun:ORBit_alloc_string fun:CORBA_string_dup fun:Bonobo_ActivationEnvValue_set fun:bonobo_activation_init_activation_env fun:bonobo_activation_orb_init fun:bonobo_activation_init } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:ORBit_alloc* fun:ORBit_small_alloc* obj:/usr/lib/libORBit-2.so* fun:PortableServer_POA_servant_to_reference obj:/usr/lib/libbonobo-2.so* } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:ORBit_alloc_tcval fun:ORBit_small_allocbuf fun:ORBit_adaptor_setup obj:/usr/lib/libORBit-2.so* fun:ORBit_POA_setup_root fun:ORBit_init_internals fun:CORBA_ORB_init } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:ORBit_alloc_tcval fun:ORBit_adaptor_setup fun:* fun:ORBit_POA_setup_root fun:ORBit_init_internals fun:CORBA_ORB_init } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:ORBit_alloc* fun:ORBit_small_allocbuf fun:bonobo_activation_init_activation_env fun:bonobo_activation_orb_init fun:bonobo_activation_init } # More GConf stuff from the FC5 buildbot, mostly variations on the # above stack traces { Memcheck:Param writev(vector[...]) fun:writev obj:/usr/lib/libORBit-2.so* fun:link_connection_writev fun:giop_send_buffer_write obj:/usr/lib/libORBit-2.so* fun:ORBit_small_invoke_stub fun:ORBit_small_invoke_stub_n fun:ORBit_c_stub_invoke fun:ConfigServer_ping fun:gconf_activate_server obj:/usr/lib/libgconf-2.so* obj:/usr/lib/libgconf-2.so* fun:gconf_engine_get_default } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:ORBit_alloc* fun:ORBit_small_alloc* obj:/usr/lib/libORBit-2.so* fun:PortableServer_POA_servant_to_reference obj:/usr/lib/libgconf-2.so* obj:/usr/lib/libgconf-2.so* obj:/usr/lib/libgconf-2.so* fun:gconf_engine_get_default } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:ORBit_alloc* fun:ORBit_small_alloc obj:/usr/lib/libORBit-2.so* fun:ORBit_demarshal_IOR fun:ORBit_demarshal_object fun:CORBA_ORB_string_to_object obj:/usr/lib/libgconf-2.so* fun:gconf_get_current_lock_holder fun:gconf_activate_server obj:/usr/lib/libgconf-2.so* obj:/usr/lib/libgconf-2.so* fun:gconf_engine_get_default } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:ORBit_alloc* fun:ORBit_small_alloc* obj:/usr/lib/libORBit-2.so* fun:ORBit_demarshal_IOR fun:ORBit_demarshal_object fun:CORBA_ORB_string_to_object obj:/usr/lib/libgconf-2.so* fun:gconf_get_current_lock_holder fun:gconf_activate_server obj:/usr/lib/libgconf-2.so* obj:/usr/lib/libgconf-2.so* fun:gconf_engine_get_default } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:ORBit_alloc* fun:ORBit_small_alloc* obj:/usr/lib/libORBit-2.so* fun:ORBit_demarshal_IOR fun:ORBit_demarshal_object fun:ORBit_demarshal_value obj:/usr/lib/libORBit-2.so* fun:ORBit_small_invoke_stub fun:ORBit_small_invoke_stub_n fun:ORBit_c_stub_invoke fun:ConfigServer_get_default_database obj:/usr/lib/libgconf-2.so* fun:gconf_engine_get_default } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:ORBit_alloc* fun:ORBit_small_alloc* obj:/usr/lib/libORBit-2.so* fun:ORBit_OAObject_object_to_objkey fun:IOP_generate_profiles fun:ORBit_marshal_object fun:ORBit_marshal_value obj:/usr/lib/libORBit-2.so* fun:ORBit_small_invoke_stub fun:ORBit_small_invoke_stub_n fun:ORBit_c_stub_invoke fun:ConfigServer_add_client obj:/usr/lib/libgconf-2.so* obj:/usr/lib/libgconf-2.so* fun:gconf_engine_get_default } { Memcheck:Leak fun:malloc obj:*libc-*.so fun:__nss_database_lookup obj:* obj:* fun:getpwnam_r obj:/usr/lib*/libglib-2.0.so.* fun:g_get_home_dir } { Memcheck:Leak fun:malloc obj:*libc-*.so fun:__nss_database_lookup obj:* obj:* fun:getpwnam_r obj:/usr/lib*/libglib-2.0.so.* fun:g_get_user_name } { Memcheck:Leak fun:malloc obj:*libc-*.so fun:__nss_database_lookup obj:* obj:* fun:getpwnam_r obj:/usr/lib*/libglib-2.0.so.* fun:g_get_tmp_dir } { Memcheck:Leak fun:malloc obj:*libc-*.so fun:__nss_database_lookup obj:* obj:* fun:getpwnam_r obj:/usr/lib*/libglib-2.0.so.0.* fun:g_get_host_name } ## Some Fontconfig errors. { Memcheck:Leak fun:malloc fun:FcPatternObjectInsertElt fun:FcPatternObjectAddWithBinding fun:FcPatternAppend fun:FcEndElement obj:/usr/lib/libexpat.so.* obj:/usr/lib/libexpat.so.* obj:/usr/lib/libexpat.so.* obj:/usr/lib/libexpat.so.* fun:XML_ParseBuffer fun:FcConfigParseAndLoad fun:FcConfigParseAndLoad fun:FcParseInclude fun:FcEndElement obj:/usr/lib/libexpat.so.* obj:/usr/lib/libexpat.so.* obj:/usr/lib/libexpat.so.* obj:/usr/lib/libexpat.so.* fun:XML_ParseBuffer fun:FcConfigParseAndLoad } { Memcheck:Leak fun:*alloc ... fun:FcInitLoadConfig } # Issues with ubuntu Hardy, same crack as for previous ubuntus { Memcheck:Leak fun:calloc obj:* fun:_dl_allocate_tls fun:pthread_create@@* obj:/usr/lib/libgthread* fun:g_thread_* } # I've made this version generic, so that it covers future modifications # of library names { Memcheck:Leak fun:calloc obj:* fun:_dl_allocate_tls fun:pthread_create@@* fun:g_thread_* } # series of invalid read of size 4 in g_module_open for ubuntu # hardy x86/32bit { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/tls/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/tls/i686/cmov/libdl-2.7.so fun:dlopen fun:g_module_open fun:gst_plugin_load_* } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/tls/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/tls/i686/cmov/libdl-2.7.so fun:dlopen fun:g_module_open fun:gst_plugin_load_* } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/tls/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/tls/i686/cmov/libdl-2.7.so fun:dlopen fun:g_module_open fun:gst_plugin_load_* } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/tls/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/tls/i686/cmov/libdl-2.7.so fun:dlopen fun:g_module_open fun:gst_plugin_load_* } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/tls/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/tls/i686/cmov/libdl-2.7.so fun:dlopen fun:g_module_open fun:gst_plugin_load* } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/tls/i686/cmov/libc-2.7.so fun:_dl_sym obj:/lib/tls/i686/cmov/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/tls/i686/cmov/libdl-2.7.so fun:dlsym fun:g_module_symbol fun:g_module_open fun:gst_plugin_load_* } # series of invalid read of size 8 in g_module_open for ubuntu # hardy x86/64bit { Memcheck:Addr8 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/libdl-2.7.so fun:dlopen fun:g_module_open } { Memcheck:Addr8 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/libdl-2.7.so fun:dlopen fun:g_module_open } { Memcheck:Addr8 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/libdl-2.7.so fun:dlopen fun:g_module_open } { Memcheck:Addr8 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/libdl-2.7.so fun:dlopen fun:g_module_open } { Memcheck:Addr8 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/libdl-2.7.so fun:dlopen fun:g_module_open } { Memcheck:Addr8 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/libdl-2.7.so fun:dlopen fun:g_module_open } { Memcheck:Addr8 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/libc-2.7.so obj:/lib/libdl-2.7.so obj:/lib/ld-2.7.so obj:/lib/libdl-2.7.so fun:dlsym fun:g_module_symbol fun:g_module_open } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/tls/i686/cmov/libc-2.7.so obj:/lib/ld-2.7.so fun:__libc_dlopen_mode fun:__nss_lookup_function obj:/lib/tls/i686/cmov/libc-2.7.so fun:__nss_passwd_lookup fun:getpwnam_r } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/tls/i686/cmov/libc-2.7.so obj:/lib/ld-2.7.so fun:__libc_dlopen_mode fun:__nss_lookup_function obj:/lib/tls/i686/cmov/libc-2.7.so fun:__nss_passwd_lookup fun:getpwnam_r } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/tls/i686/cmov/libc-2.7.so obj:/lib/ld-2.7.so fun:__libc_dlopen_mode fun:__nss_lookup_function obj:/lib/tls/i686/cmov/libnss_compat-2.7.so fun:_nss_compat_getpwnam_r fun:getpwnam_r } { Memcheck:Addr4 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/tls/i686/cmov/libc-2.7.so obj:/lib/ld-2.7.so fun:__libc_dlopen_mode fun:__nss_lookup_function obj:/lib/tls/i686/cmov/libnss_compat-2.7.so fun:_nss_compat_getpwnam_r fun:getpwnam_r } { Memcheck:Addr8 obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/ld-2.7.so obj:/lib/libc-2.7.so obj:/lib/ld-2.7.so fun:__libc_dlopen_mode fun:__nss_lookup_function obj:/lib/libc-2.7.so fun:getpwnam_r } ## Leaks in ALSA (variations of leak from snd_config_load1) { Memcheck:Leak fun:calloc fun:_snd_config_make fun:_snd_config_make_add fun:* fun:* fun:* fun:* fun:snd_config_load1 } { Memcheck:Leak fun:calloc fun:_snd_config_make fun:_snd_config_make_add fun:* fun:* fun:snd_config_load1 } { Memcheck:Leak fun:calloc fun:_snd_config_make fun:_snd_config_make_add fun:* fun:* fun:* fun:snd_config_load1 } { Memcheck:Leak fun:calloc fun:_snd_config_make fun:_snd_config_make_add fun:* fun:* fun:* fun:* fun:* fun:snd_config_load1 } { Memcheck:Leak fun:calloc fun:_snd_config_make fun:_snd_config_make_add fun:* fun:* fun:* fun:* fun:* fun:* fun:snd_config_load1 } { Memcheck:Leak fun:calloc fun:_snd_config_make fun:_snd_config_make_add fun:* fun:* fun:* fun:* fun:* fun:* fun:* fun:snd_config_load1 } { Memcheck:Leak fun:calloc fun:_snd_config_make fun:_snd_config_make_add fun:* fun:* fun:* fun:* fun:* fun:* fun:* fun:* fun:snd_config_load1 } { Memcheck:Leak fun:malloc fun:snd1_dlobj_cache_add fun:snd_ctl_open_noupdate } { Memcheck:Leak fun:malloc fun:* fun:snd1_dlobj_cache_add fun:snd_ctl_open_noupdate } { Memcheck:Leak fun:*alloc fun:* fun:* fun:* fun:snd_config_load1 } { Memcheck:Leak fun:*alloc fun:* fun:* fun:* fun:* fun:snd_config_load1 } { Memcheck:Leak fun:*alloc fun:* fun:* fun:* fun:* fun:* fun:snd_config_load1 } { Memcheck:Leak fun:*alloc fun:* fun:* fun:* fun:* fun:* fun:* fun:snd_config_load1 } { Memcheck:Leak fun:*alloc fun:* fun:* fun:* fun:* fun:* fun:* fun:* fun:snd_config_load1 } { Memcheck:Leak fun:*alloc fun:* fun:* fun:* fun:* fun:* fun:* fun:* fun:* fun:snd_config_load1 } { Memcheck:Leak fun:*alloc fun:* fun:* fun:* fun:* fun:* fun:* fun:* fun:* fun:* fun:snd_config_load1 } { Memcheck:Leak fun:*alloc fun:* fun:* fun:* fun:* fun:* fun:* fun:* fun:* fun:* fun:* fun:snd_config_load1 } # The following are leaks of caps that need to be created dynamically # in the type registration of the plugin (used for pad templates). { Memcheck:Leak fun:malloc fun:g_malloc fun:g_slice_alloc fun:gst_caps_new_empty fun:gst_caps_new_simple fun:* fun:g_type_class_ref fun:gst_element_register } { Memcheck:Leak fun:malloc fun:g_malloc fun:g_slice_alloc fun:gst_caps_new_empty fun:* fun:* fun:g_type_class_ref fun:gst_element_register fun:gst_ogm_parse_plugin_init fun:plugin_init } { Memcheck:Leak fun:malloc fun:g_malloc fun:g_slice_alloc fun:gst_caps_new_empty fun:gst_caps_copy fun:gst_video_test_src_base_init fun:g_type_class_ref fun:gst_element_register } { Memcheck:Leak fun:malloc fun:g_malloc fun:g_slice_alloc fun:gst_caps_new_empty fun:gst_caps_copy fun:gst_video_test_src_getcaps fun:gst_video_test_src_base_init fun:g_type_class_ref fun:gst_element_register } { Memcheck:Leak fun:malloc fun:g_malloc fun:g_slice_alloc fun:gst_caps_new_empty fun:gst_ffmpegcsp_codectype_to_caps fun:gst_ffmpegcolorspace_register fun:plugin_init } { Memcheck:Leak fun:malloc fun:g_malloc fun:g_slice_alloc fun:gst_caps_new_empty fun:gst_caps_copy fun:gst_ffmpegcolorspace_register fun:plugin_init } { Memcheck:Leak fun:malloc fun:g_malloc fun:g_slice_alloc fun:gst_caps_new_empty fun:gst_caps_new_any fun:gst_ffmpegdemux_register fun:plugin_init } { Memcheck:Leak fun:malloc fun:g_malloc fun:g_slice_alloc fun:gst_caps_new_empty fun:gst_caps_copy fun:gst_audio_filter_class_add_pad_templates } { Memcheck:Leak fun:realloc fun:g_realloc fun:g_ptr_array_maybe_expand fun:g_ptr_array_add fun:gst_caps_append fun:gst_audio_filter_class_add_pad_templates } { Memcheck:Leak fun:malloc fun:realloc fun:g_realloc fun:g_ptr_array_maybe_expand fun:g_ptr_array_add fun:gst_caps_append fun:gst_audio_filter_class_add_pad_templates } { Memcheck:Leak fun:malloc fun:realloc fun:g_realloc fun:g_ptr_array_maybe_expand fun:g_ptr_array_add fun:gst_caps_copy fun:gst_audio_filter_class_add_pad_templates } { Memcheck:Leak fun:malloc fun:g_malloc fun:g_slice_alloc fun:g_ptr_array_sized_new fun:gst_caps_new_empty fun:gst_caps_copy fun:gst_audio_filter_class_add_pad_templates } { Memcheck:Leak fun:malloc fun:realloc fun:g_realloc fun:g_array_maybe_expand fun:g_array_sized_new fun:* fun:* fun:* fun:gst_value_init_and_copy fun:gst_structure_copy fun:gst_caps_copy fun:gst_audio_filter_class_add_pad_templates } { Memcheck:Leak fun:malloc fun:realloc fun:g_realloc fun:g_array_maybe_expand fun:g_array_sized_new fun:* fun:gst_structure_copy fun:gst_caps_copy fun:gst_audio_filter_class_add_pad_templates } { Memcheck:Leak fun:malloc fun:g_malloc fun:g_slice_alloc fun:g_array_sized_new fun:* fun:gst_structure_copy fun:gst_caps_copy fun:gst_audio_filter_class_add_pad_templates } { Memcheck:Leak fun:malloc fun:g_malloc fun:g_slice_alloc fun:gst_caps_new_empty fun:gst_riff_create_*_template_caps } { Memcheck:Leak fun:malloc fun:realloc fun:g_realloc fun:* fun:* fun:* fun:gst_structure_copy fun:gst_caps_copy fun:gst_caps_append fun:gst_riff_create_*_template_caps } { Memcheck:Leak fun:malloc fun:g_malloc fun:g_slice_alloc fun:g_array_sized_new fun:* fun:gst_structure_copy fun:gst_caps_copy fun:gst_caps_append fun:gst_riff_create_*_template_caps } ## Leaks in pango (bilboed: gentoo unstable amd64) { Memcheck:Leak fun:*alloc ... fun:pango_layout_get_pixel_extents } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:pango_language_from_string fun:pango_language_get_default fun:pango_context_init fun:g_type_create_instance fun:g_object_constructor fun:g_object_newv fun:g_object_new_valist fun:g_object_new fun:pango_font_map_create_context } { Memcheck:Leak fun:calloc fun:g_malloc0 fun:pango_language_from_string } ## Leak of everything allocated by gst-libav plugin init { Memcheck:Leak fun:*alloc ... fun:gst_ffmpeg_cfg_init } ## Leak of GIO module through gnomevfs { Memcheck:Leak fun:malloc fun:g_malloc fun:* fun:* fun:g_type_create_instance fun:* fun:* fun:* fun:* fun:g_io_module_new fun:g_io_modules_load_all_in_directory fun:* fun:get_default_vfs } ## Conditional jump in getaddrinfo (bilboed, gentoo ~amd64, Dec 13 2008) { Memcheck:Cond fun:gaih_inet fun:getaddrinfo } ## Dynamic pad templates in mxfmux { Memcheck:Leak fun:malloc fun:g_malloc fun:g_slice_alloc fun:gst_caps_new_empty fun:gst_caps_from_string fun:mxf_*_init fun:plugin_init } ## We don't know if ffmpeg frees this or not and better pass a copy for safety { Memcheck:Leak fun:malloc fun:g_malloc fun:g_strdup fun:gst_ffmpeg_cfg_fill_context fun:gst_ffmpegenc_setcaps fun:gst_pad_set_caps } ## Leak/overreads with glibc-2.10 { Memcheck:Value8 fun:do_sym fun:dlsym_doit fun:_dl_catch_error fun:_dlerror_run fun:dlsym } { Memcheck:Cond fun:do_sym fun:dlsym_doit fun:_dl_catch_error fun:_dlerror_run fun:dlsym } { Memcheck:Value8 fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen* } { Memcheck:Value8 fun:_dl_relocate_object fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen* } { Memcheck:Value8 fun:_dl_check_map_versions fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen* } { Memcheck:Cond fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen* } { Memcheck:Cond fun:_dl_relocate_object fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen* } { Memcheck:Cond fun:_dl_check_map_versions fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen* } { Memcheck:Cond fun:_dl_map_object* fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen* } { Memcheck:Value8 fun:_dl_map_object* fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen* } { Memcheck:Value8 fun:_dl_check_caller fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen* } { Memcheck:Cond fun:_dl_check_caller fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen* } { Memcheck:Value8 obj:/lib*/libc-2.10.*.so obj:/lib*/libc-2.10.*.so fun:_vgnU_freeres } { Memcheck:Cond obj:/lib*/libc-2.10.*.so obj:/lib*/libc-2.10.*.so fun:_vgnU_freeres } { Memcheck:Free fun:free obj:/lib*/libc-2.10.*.so obj:/lib*/libc-2.10.*.so fun:_vgnU_freeres } { Memcheck:Value8 fun:_dl_fini fun:__run_exit_handlers fun:exit } { Memcheck:Cond fun:_dl_fini fun:__run_exit_handlers fun:exit } { Memcheck:Value8 fun:_dl_sort_fini fun:_dl_fini fun:__run_exit_handlers fun:exit } { Memcheck:Cond fun:_dl_sort_fini fun:_dl_fini fun:__run_exit_handlers fun:exit } # glibc-2.10 dl overreads { Memcheck:Value8 fun:_dl_fixup fun:_dl_runtime_resolve } { Memcheck:Cond fun:_dl_fixup fun:_dl_runtime_resolve } { Memcheck:Value8 fun:_dl_lookup_symbol_x fun:_dl_fixup fun:_dl_runtime_resolve } { Memcheck:Cond fun:_dl_lookup_symbol_x fun:_dl_fixup fun:_dl_runtime_resolve } { Memcheck:Value8 fun:call_init fun:_dl_init } { Memcheck:Value8 fun:_dl_init } { Memcheck:Value8 fun:do_lookup_x fun:_dl_lookup_symbol_x fun:_dl_relocate_object fun:dl_main } { Memcheck:Cond fun:do_lookup_x fun:_dl_lookup_symbol_x fun:_dl_relocate_object fun:dl_main } { Memcheck:Value8 fun:_dl_lookup_symbol_x fun:_dl_relocate_object fun:dl_main } { Memcheck:Value8 fun:_dl_relocate_object fun:dl_main } { Memcheck:Value8 fun:dl_main fun:_dl_sysdep_start fun:_dl_start } { Memcheck:Cond fun:dl_main fun:_dl_sysdep_start fun:_dl_start } { Memcheck:Cond fun:* fun:do_lookup_x fun:_dl_lookup_symbol_x fun:_dl_relocate_object fun:dl_main } { Memcheck:Value8 fun:* fun:do_lookup_x fun:_dl_lookup_symbol_x fun:_dl_relocate_object fun:dl_main } { Memcheck:Value8 fun:_dl_check_map_versions fun:_dl_check_all_versions fun:version_check_doit fun:_dl_receive_error fun:dl_main } { Memcheck:Cond fun:_dl_check_map_versions fun:_dl_check_all_versions fun:version_check_doit fun:_dl_receive_error fun:dl_main } { Memcheck:Value8 fun:_dl_check_all_versions fun:version_check_doit fun:_dl_receive_error fun:dl_main } { Memcheck:Cond fun:_dl_check_all_versions fun:version_check_doit fun:_dl_receive_error fun:dl_main } { Memcheck:Value8 fun:* fun:_dl_check_map_versions fun:_dl_check_all_versions fun:version_check_doit fun:_dl_receive_error fun:dl_main } { Memcheck:Cond fun:* fun:_dl_check_map_versions fun:_dl_check_all_versions fun:version_check_doit fun:_dl_receive_error fun:dl_main } { Memcheck:Value8 fun:init_tls fun:dl_main } { Memcheck:Cond fun:init_tls fun:dl_main } { Memcheck:Cond fun:_dl_map_object_deps fun:dl_main } { Memcheck:Value8 fun:_dl_map_object_deps fun:dl_main } { Memcheck:Value8 fun:_dl_protect_relro fun:_dl_relocate_object fun:dl_main } { Memcheck:Value8 fun:* fun:do_lookup_x fun:_dl_lookup_symbol_x fun:_dl_relocate_object fun:dl_main } { Memcheck:Value8 fun:_dl_setup_hash fun:_dl_map_object_from_fd fun:_dl_map_object } { Memcheck:Value8 fun:* fun:_dl_new_object fun:_dl_map_object_from_fd fun:_dl_map_object } { Memcheck:Cond fun:* fun:_dl_new_object fun:_dl_map_object_from_fd fun:_dl_map_object } { Memcheck:Value8 fun:openaux fun:_dl_catch_error fun:_dl_map_object_deps fun:dl_main } { Memcheck:Value8 fun:* fun:_dl_map_object } { Memcheck:Cond fun:* fun:_dl_map_object } { Memcheck:Cond fun:_dl_map_object fun:openaux fun:_dl_catch_error fun:_dl_map_object_deps fun:dl_main } { Memcheck:Value8 fun:_dl_map_object fun:openaux fun:_dl_catch_error fun:_dl_map_object_deps fun:dl_main } { Memcheck:Cond fun:* fun:_dl_map_object fun:openaux fun:_dl_catch_error fun:_dl_map_object_deps fun:dl_main } { Memcheck:Value8 fun:* fun:open_path fun:_dl_map_object fun:openaux fun:_dl_catch_error fun:_dl_map_object_deps fun:dl_main } { Memcheck:Cond fun:* fun:open_path fun:_dl_map_object fun:openaux fun:_dl_catch_error fun:_dl_map_object_deps fun:dl_main } { Memcheck:Value8 fun:_dl_map_object_from_fd fun:_dl_map_object } { Memcheck:Cond fun:_dl_map_object_from_fd fun:_dl_map_object } { Memcheck:Value8 fun:* fun:_dl_new_object fun:_dl_map_object_from_fd fun:_dl_map_object } { Memcheck:Value8 fun:_dl_new_object fun:_dl_map_object_from_fd fun:_dl_map_object } { Memcheck:Cond fun:_dl_new_object fun:_dl_map_object_from_fd fun:_dl_map_object } { Memcheck:Value8 fun:* fun:_dl_name_match_p fun:_dl_map_object } { Memcheck:Cond fun:* fun:* fun:_dl_map_object } { Memcheck:Value8 fun:* fun:_dl_name_match_p fun:_dl_check_map_versions fun:_dl_check_all_versions } { Memcheck:Value8 fun:* fun:* fun:do_lookup_x fun:_dl_lookup_symbol_x } { Memcheck:Cond fun:do_lookup_x fun:_dl_lookup_symbol_x } { Memcheck:Value8 fun:do_lookup_x fun:_dl_lookup_symbol_x } { Memcheck:Value8 fun:* fun:do_lookup_x fun:_dl_lookup_symbol_x } { Memcheck:Cond fun:* fun:do_lookup_x fun:_dl_lookup_symbol_x } { Memcheck:Value8 fun:_dl_name_match_p fun:_dl_map_object fun:dl_open_worker } { Memcheck:Cond fun:_dl_name_match_p fun:_dl_map_object fun:dl_open_worker } { Memcheck:Value8 fun:* fun:_dl_name_match_p fun:_dl_map_object fun:dl_open_worker } { Memcheck:Cond fun:* fun:_dl_name_match_p fun:_dl_map_object fun:dl_open_worker } { Memcheck:Value8 fun:_dl_lookup_symbol_x fun:_dl_relocate_object } { Memcheck:Cond fun:_dl_lookup_symbol_x fun:_dl_relocate_object } { Memcheck:Value8 fun:* fun:* fun:_dl_check_map_versions } { Memcheck:Value8 fun:* fun:_dl_check_map_versions } { Memcheck:Cond fun:* fun:* fun:_dl_check_map_versions } { Memcheck:Cond fun:* fun:_dl_check_map_versions } { Memcheck:Value8 fun:openaux } { Memcheck:Value8 fun:_dl_name_match_p fun:_dl_map_object } { Memcheck:Cond fun:_dl_close_worker fun:_dl_close fun:_dl_catch_error fun:dlerror_run } { Memcheck:Value8 fun:_dl_close_worker fun:_dl_close fun:_dl_catch_error fun:dlerror_run } { Memcheck:Cond fun:* fun:_dl_close_worker fun:_dl_close fun:_dl_catch_error fun:dlerror_run } { Memcheck:Value8 fun:* fun:_dl_close_worker fun:_dl_close fun:_dl_catch_error fun:dlerror_run } { Memcheck:Cond fun:fillin_rpath fun:_dl_init_paths fun:dl_main } { Memcheck:Value8 fun:fillin_rpath fun:_dl_init_paths fun:dl_main } { Memcheck:Cond fun:* fun:fillin_rpath fun:_dl_init_paths fun:dl_main } { Memcheck:Value8 fun:* fun:fillin_rpath fun:_dl_init_paths fun:dl_main } { Memcheck:Cond fun:_dl_map_object fun:map_doit fun:_dl_catch_error fun:do_preload fun:dl_main } { Memcheck:Value8 fun:_dl_map_object fun:map_doit fun:_dl_catch_error fun:do_preload fun:dl_main } { Memcheck:Param open(filename) fun:open fun:open_verify fun:_dl_map_object fun:map_doit fun:_dl_catch_error fun:do_preload fun:dl_main } { Memcheck:Param stat(file_name) fun:_xstat fun:open_path fun:_dl_map_object fun:openaux fun:_dl_catch_error fun:_dl_map_object_deps fun:dl_main } { Memcheck:Value8 fun:_dl_catch_error fun:_dl_map_object_deps fun:dl_open_worker } { Memcheck:Cond fun:* fun:_dl_map_object_deps fun:dl_main } { Memcheck:Value8 fun:* fun:_dl_map_object_deps fun:dl_main } { Memcheck:Value8 fun:* fun:* fun:_dl_map_object_deps fun:dl_main } # glibc-2.10 tls issues { Memcheck:Cond fun:* fun:init_tls fun:dl_main } { Memcheck:Value8 fun:* fun:init_tls fun:dl_main } { Memcheck:Cond fun:* fun:* fun:init_tls fun:dl_main } { Memcheck:Value8 fun:* fun:* fun:init_tls fun:dl_main } { Memcheck:Cond fun:_dl_allocate_tls_init fun:dl_main } { Memcheck:Value8 fun:_dl_allocate_tls_init fun:dl_main } { Memcheck:Cond fun:* fun:_dl_allocate_tls_init fun:dl_main } { Memcheck:Value8 fun:* fun:_dl_allocate_tls_init fun:dl_main } { Memcheck:Cond fun:__tls* obj:* obj:* fun:_vgnU_freeres } { Memcheck:Param arch_prctl(arg2) fun:init_tls } # GLib caching tmp/home directories (glibc-2.10 variants) { Memcheck:Cond fun:* fun:dl_open_worker fun:* fun:* fun:* fun:_dl_catch_error fun:dlerror_run fun:* fun:__nss_lookup_function fun:__nss_lookup fun:getpwnam* } { Memcheck:Value8 fun:* fun:dl_open_worker fun:* fun:* fun:* fun:_dl_catch_error fun:dlerror_run fun:* fun:__nss_lookup_function fun:__nss_lookup fun:getpwnam* } { Memcheck:Cond fun:dl_open_worker fun:* fun:* fun:do_dlopen fun:* fun:dlerror_run fun:* fun:__nss_lookup_function fun:__nss_lookup fun:getpwnam* } { Memcheck:Value8 fun:dl_open_worker fun:* fun:* fun:do_dlopen fun:* fun:dlerror_run fun:* fun:__nss_lookup_function fun:__nss_lookup fun:getpwnam* } { Memcheck:Value8 fun:_dl_add_to_slotinfo fun:dl_main } { Memcheck:Param open(filename) fun:open fun:open_verify fun:open_path fun:_dl_map_object } # GModule issues with glibc-2.10 { Memcheck:Value8 fun:* fun:* fun:dlsym fun:g_module_symbol } { Memcheck:Value8 fun:g_module_* fun:gst_plugin* } { Memcheck:Value8 fun:* fun:g_module_* fun:gst_plugin* } { Memcheck:Value8 fun:* fun:* fun:dlopen* fun:g_module_open } { Memcheck:Value8 fun:* fun:* fun:* fun:* fun:* fun:* fun:* fun:dlsym fun:g_module_symbol } { Memcheck:Value8 fun:* fun:* fun:* fun:* fun:* fun:dlopen* fun:g_module_open } # Leak in GSlice { Memcheck:Value8 fun:g_parse_debug_string fun:slice_config_init fun:g_slice_init_nomessage fun:_g_slice_thread_init_nomessage fun:g_thread_init_glib } # 2.10 pthread issues { Memcheck:Value8 fun:__pthread_initialize_minimal } # glibc 2.11 conditional { Memcheck:Cond fun:_dl_relocate_object fun:dl_main fun:_dl_sysdep_start fun:_dl_start obj:/lib64/ld-2.11.so } # glibc 2.11 Leak { Memcheck:Leak fun:*alloc fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen@@GLIBC_2.2.5 } { Memcheck:Leak fun:*alloc fun:_dl_* fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen@@GLIBC_2.2.5 } { Memcheck:Leak fun:*alloc fun:_dl_* fun:_dl_* fun:_dl_* fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen@@GLIBC_2.2.5 } { Memcheck:Leak fun:*alloc fun:* fun:_dl_* fun:openaux fun:_dl_catch_error fun:_dl_map_object_deps fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen@@GLIBC_2.2.5 } { Memcheck:Leak fun:*alloc fun:* fun:_dl_map_object fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen@@GLIBC_2.2.5 } { Memcheck:Leak fun:*alloc fun:_dl_new_object fun:_dl_map_object_from_fd fun:_dl_map_object fun:openaux fun:_dl_catch_error fun:_dl_map_object_deps fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen@@GLIBC_2.2.5 } { Memcheck:Leak fun:*alloc fun:* fun:_dl_* fun:_dl_* fun:_dl_* fun:dl_open_worker fun:_dl_catch_error fun:_dl_open fun:dlopen_doit fun:_dl_catch_error fun:_dlerror_run fun:dlopen@@GLIBC_2.2.5 } # glib type leaks { Memcheck:Leak fun:*alloc ... fun:g_type_register_static } # new registry system # all of this will only be created once when loading registry. { Memcheck:Leak fun:*alloc ... fun:_priv_gst_registry_chunks_load_plugin } # system-wide tags # these tags are registered once { Memcheck:Leak fun:*alloc fun:* fun:* fun:gst_tag_register fun:_gst_tag_initialize } # system-wide type classes that we keep referenced { Memcheck:Leak fun:*alloc ... fun:g_type_class_ref } # leaking cached queries which are only initialized once { Memcheck:Leak fun:*alloc ... fun:_gst_query_initialize fun:init_post } # macosx (leopard) library loader leak { Memcheck:Leak fun:_Znwm fun:_ZNSs4_Rep9_S_createEmmRKSaIcE fun:_ZNSs12_S_constructIPKcEEPcT_S3_RKSaIcESt20forward_iterator_tag fun:_ZNSsC2EPKcRKSaIcE fun:_Z41__static_initialization_and_destruction_0ii fun:_ZN16ImageLoaderMachO18doModInitFunctionsERKN11ImageLoader11LinkContextE } # GObject type registration { Memcheck:Leak fun:*alloc ... fun:_g_atomic_array_copy } { Memcheck:Leak fun:*alloc fun:getdelim obj:*libselinux* } { Memcheck:Leak fun:*alloc ... obj:*/sed } { Memcheck:Addr8 ... obj:*/sed } # GLib 2.23 interface vtable { Memcheck:Leak fun:*alloc ... fun:g_type_add_interface_static } { Memcheck:Leak fun:*alloc obj:*/dash } # libtool/gentoo fake leak # it actually runs bash and valgrind complains { Memcheck:Leak fun:*alloc obj:/bin/bash } { Memcheck:Leak fun:*alloc ... fun:_gst_plugin_loader_client_run fun:main } { Memcheck:Cond fun:*strcasecmp* ... fun:__dcigettext } { Memcheck:Value8 fun:*strcasecmp* ... fun:__dcigettext } { Memcheck:Leak fun:malloc ... fun:gst_poll_new fun:gst_poll_new_timer fun:gst_system_clock_init } { Memcheck:Leak fun:calloc ... fun:gobject_init_ctor } { Memcheck:Leak fun:malloc ... fun:g_quark_from*_string } { Memcheck:Param timer_create(evp) fun:timer_create@@GLIBC_2.3.3 } { closures aren't valgrind friendly (bgo#739850) Memcheck:Leak fun:calloc ... fun:g_cclosure_new } { closures aren't valgrind friendly (bgo#739850) Memcheck:Leak fun:malloc ... fun:g_closure_add_invalidate_notifier } { closures aren't valgrind friendly (bgo#739850) Memcheck:Leak fun:calloc ... fun:g_closure_new_simple } { glib/giomodules2 (from libsoup.supp) Memcheck:Leak ... fun:_g_io_module_get_default } { Memcheck:Addr8 fun:__GI___strncasecmp_l fun:____strtod_l_internal fun:gst_value_deserialize_double } { Memcheck:Addr8 fun:do_lookup_x } { Memcheck:Leak fun:malloc ... fun:g_quark_init } { Leak of debug function list Memcheck:Leak fun:*alloc ... fun:g_slist_prepend fun:gst_debug_add_log_function }parlatype-1.5.4/libparlatype/tests/Makefile.am0000644000175000017500000000117713176574165016356 00000000000000include $(top_srcdir)/glib-tap.mk @VALGRIND_CHECK_RULES@ VALGRIND_SUPPRESSIONS_FILES = glib.supp gst.supp @CODE_COVERAGE_RULES@ CODE_COVERAGE_IGNORE_PATTERN = pt-resources.c *include* EXTRA_DIST += \ glib.supp \ gst.supp \ data/README AM_CFLAGS = -g $(GTK_CFLAGS) $(GSTREAMER_CFLAGS) $(MAINTAINER_CFLAGS) LDADD = $(top_builddir)/src/libparlatype.la $(GTK_LIBS) $(GSTREAMER_LIBS) AM_LDFLAGS = -export-dynamic AM_CPPFLAGS = \ -DG_LOG_DOMAIN=\"libparlatype-unittest\" \ -I$(top_srcdir) \ -I$(top_builddir) test_programs = \ player \ progressdialog \ wavedata \ waveloader \ waveviewer dist_test_data = \ data/test1.ogg parlatype-1.5.4/libparlatype/missing0000755000175000017500000001533013167645076014553 00000000000000#! /bin/sh # Common wrapper for a few potentially missing GNU programs. scriptversion=2013-10-28.13; # UTC # Copyright (C) 1996-2013 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try '$0 --help' for more information" exit 1 fi case $1 in --is-lightweight) # Used by our autoconf macros to check whether the available missing # script is modern enough. exit 0 ;; --run) # Back-compat with the calling convention used by older automake. shift ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit Supported PROGRAM values: aclocal autoconf autoheader autom4te automake makeinfo bison yacc flex lex help2man Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and 'g' are ignored when checking the name. Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: unknown '$1' option" echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac # Run the given program, remember its exit status. "$@"; st=$? # If it succeeded, we are done. test $st -eq 0 && exit 0 # Also exit now if we it failed (or wasn't found), and '--version' was # passed; such an option is passed most likely to detect whether the # program is present and works. case $2 in --version|--help) exit $st;; esac # Exit code 63 means version mismatch. This often happens when the user # tries to use an ancient version of a tool on a file that requires a # minimum version. if test $st -eq 63; then msg="probably too old" elif test $st -eq 127; then # Program was missing. msg="missing on your system" else # Program was found and executed, but failed. Give up. exit $st fi perl_URL=http://www.perl.org/ flex_URL=http://flex.sourceforge.net/ gnu_software_URL=http://www.gnu.org/software program_details () { case $1 in aclocal|automake) echo "The '$1' program is part of the GNU Automake package:" echo "<$gnu_software_URL/automake>" echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/autoconf>" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; autoconf|autom4te|autoheader) echo "The '$1' program is part of the GNU Autoconf package:" echo "<$gnu_software_URL/autoconf/>" echo "It also requires GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; esac } give_advice () { # Normalize program name to check for. normalized_program=`echo "$1" | sed ' s/^gnu-//; t s/^gnu//; t s/^g//; t'` printf '%s\n' "'$1' is $msg." configure_deps="'configure.ac' or m4 files included by 'configure.ac'" case $normalized_program in autoconf*) echo "You should only need it if you modified 'configure.ac'," echo "or m4 files included by it." program_details 'autoconf' ;; autoheader*) echo "You should only need it if you modified 'acconfig.h' or" echo "$configure_deps." program_details 'autoheader' ;; automake*) echo "You should only need it if you modified 'Makefile.am' or" echo "$configure_deps." program_details 'automake' ;; aclocal*) echo "You should only need it if you modified 'acinclude.m4' or" echo "$configure_deps." program_details 'aclocal' ;; autom4te*) echo "You might have modified some maintainer files that require" echo "the 'autom4te' program to be rebuilt." program_details 'autom4te' ;; bison*|yacc*) echo "You should only need it if you modified a '.y' file." echo "You may want to install the GNU Bison package:" echo "<$gnu_software_URL/bison/>" ;; lex*|flex*) echo "You should only need it if you modified a '.l' file." echo "You may want to install the Fast Lexical Analyzer package:" echo "<$flex_URL>" ;; help2man*) echo "You should only need it if you modified a dependency" \ "of a man page." echo "You may want to install the GNU Help2man package:" echo "<$gnu_software_URL/help2man/>" ;; makeinfo*) echo "You should only need it if you modified a '.texi' file, or" echo "any other file indirectly affecting the aspect of the manual." echo "You might want to install the Texinfo package:" echo "<$gnu_software_URL/texinfo/>" echo "The spurious makeinfo call might also be the consequence of" echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" echo "want to install GNU make:" echo "<$gnu_software_URL/make/>" ;; *) echo "You might have modified some files without having the proper" echo "tools for further handling them. Check the 'README' file, it" echo "often tells you about the needed prerequisites for installing" echo "this package. You may also peek at any GNU archive site, in" echo "case some other package contains this missing '$1' program." ;; esac } give_advice "$1" | sed -e '1s/^/WARNING: /' \ -e '2,$s/^/ /' >&2 # Propagate the correct exit status (expected to be 127 for a program # not found, 63 for a program that failed due to version mismatch). exit $st # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: parlatype-1.5.4/libparlatype/config.rpath0000644000175000017500000000000013176574164015444 00000000000000parlatype-1.5.4/libparlatype/glib-tap.mk0000644000175000017500000001444313176574164015207 00000000000000# GLIB - Library of useful C routines AM_TESTS_ENVIRONMENT= \ G_TEST_SRCDIR="$(abs_srcdir)" \ G_TEST_BUILDDIR="$(abs_builddir)" \ G_DEBUG=gc-friendly \ MALLOC_CHECK_=2 \ MALLOC_PERTURB_=$$(($${RANDOM:-256} % 256)) LOG_DRIVER = env AM_TAP_AWK='$(AWK)' $(SHELL) $(top_srcdir)/tap-driver.sh LOG_COMPILER = $(top_srcdir)/tap-test NULL = # initialize variables for unconditional += appending BUILT_SOURCES = BUILT_EXTRA_DIST = CLEANFILES = *.log *.trs DISTCLEANFILES = MAINTAINERCLEANFILES = EXTRA_DIST = TESTS = installed_test_LTLIBRARIES = installed_test_PROGRAMS = installed_test_SCRIPTS = nobase_installed_test_DATA = noinst_LTLIBRARIES = noinst_PROGRAMS = noinst_SCRIPTS = noinst_DATA = check_LTLIBRARIES = check_PROGRAMS = check_SCRIPTS = check_DATA = # We support a fairly large range of possible variables. It is expected that all types of files in a test suite # will belong in exactly one of the following variables. # # First, we support the usual automake suffixes, but in lowercase, with the customary meaning: # # test_programs, test_scripts, test_data, test_ltlibraries # # The above are used to list files that are involved in both uninstalled and installed testing. The # test_programs and test_scripts are taken to be actual testcases and will be run as part of the test suite. # Note that _data is always used with the nobase_ automake variable name to ensure that installed test data is # installed in the same way as it appears in the package layout. # # In order to mark a particular file as being only for one type of testing, use 'installed' or 'uninstalled', # like so: # # installed_test_programs, uninstalled_test_programs # installed_test_scripts, uninstalled_test_scripts # installed_test_data, uninstalled_test_data # installed_test_ltlibraries, uninstalled_test_ltlibraries # # Additionally, we support 'extra' infixes for programs and scripts. This is used for support programs/scripts # that should not themselves be run as testcases (but exist to be used from other testcases): # # test_extra_programs, installed_test_extra_programs, uninstalled_test_extra_programs # test_extra_scripts, installed_test_extra_scripts, uninstalled_test_extra_scripts # # Additionally, for _scripts and _data, we support the customary dist_ prefix so that the named script or data # file automatically end up in the tarball. # # dist_test_scripts, dist_test_data, dist_test_extra_scripts # dist_installed_test_scripts, dist_installed_test_data, dist_installed_test_extra_scripts # dist_uninstalled_test_scripts, dist_uninstalled_test_data, dist_uninstalled_test_extra_scripts # # Note that no file is automatically disted unless it appears in one of the dist_ variables. This follows the # standard automake convention of not disting programs scripts or data by default. # # test_programs, test_scripts, uninstalled_test_programs and uninstalled_test_scripts (as well as their disted # variants) will be run as part of the in-tree 'make check'. These are all assumed to be runnable under # gtester. That's a bit strange for scripts, but it's possible. TESTS += $(test_programs) $(test_scripts) $(uninstalled_test_programs) $(uninstalled_test_scripts) \ $(dist_test_scripts) $(dist_uninstalled_test_scripts) # Note: build even the installed-only targets during 'make check' to ensure that they still work. # We need to do a bit of trickery here and manage disting via EXTRA_DIST instead of using dist_ prefixes to # prevent automake from mistreating gmake functions like $(wildcard ...) and $(addprefix ...) as if they were # filenames, including removing duplicate instances of the opening part before the space, eg. '$(addprefix'. all_test_programs = $(test_programs) $(uninstalled_test_programs) $(installed_test_programs) \ $(test_extra_programs) $(uninstalled_test_extra_programs) $(installed_test_extra_programs) all_test_scripts = $(test_scripts) $(uninstalled_test_scripts) $(installed_test_scripts) \ $(test_extra_scripts) $(uninstalled_test_extra_scripts) $(installed_test_extra_scripts) all_dist_test_scripts = $(dist_test_scripts) $(dist_uninstalled_test_scripts) $(dist_installed_test_scripts) \ $(dist_test_extra_scripts) $(dist_uninstalled_test_extra_scripts) $(dist_installed_test_extra_scripts) all_test_scripts += $(all_dist_test_scripts) EXTRA_DIST += $(all_dist_test_scripts) all_test_data = $(test_data) $(uninstalled_test_data) $(installed_test_data) all_dist_test_data = $(dist_test_data) $(dist_uninstalled_test_data) $(dist_installed_test_data) all_test_data += $(all_dist_test_data) EXTRA_DIST += $(all_dist_test_data) all_test_ltlibs = $(test_ltlibraries) $(uninstalled_test_ltlibraries) $(installed_test_ltlibraries) if ENABLE_ALWAYS_BUILD_TESTS noinst_LTLIBRARIES += $(all_test_ltlibs) noinst_PROGRAMS += $(all_test_programs) noinst_SCRIPTS += $(all_test_scripts) noinst_DATA += $(all_test_data) else check_LTLIBRARIES += $(all_test_ltlibs) check_PROGRAMS += $(all_test_programs) check_SCRIPTS += $(all_test_scripts) check_DATA += $(all_test_data) endif if ENABLE_INSTALLED_TESTS installed_test_PROGRAMS += $(test_programs) $(installed_test_programs) \ $(test_extra_programs) $(installed_test_extra_programs) installed_test_SCRIPTS += $(test_scripts) $(installed_test_scripts) \ $(test_extra_scripts) $(installed_test_extra_scripts) installed_test_SCRIPTS += $(dist_test_scripts) $(dist_test_extra_scripts) \ $(dist_installed_test_scripts) $(dist_installed_test_extra_scripts) nobase_installed_test_DATA += $(test_data) $(installed_test_data) nobase_installed_test_DATA += $(dist_test_data) $(dist_installed_test_data) installed_test_LTLIBRARIES += $(test_ltlibraries) $(installed_test_ltlibraries) installed_testcases = $(test_programs) $(installed_test_programs) \ $(test_scripts) $(installed_test_scripts) \ $(dist_test_scripts) $(dist_installed_test_scripts) installed_test_meta_DATA = $(installed_testcases:=.test) %.test: %$(EXEEXT) Makefile $(AM_V_GEN) (echo '[Test]' > $@.tmp; \ echo 'Type=session' >> $@.tmp; \ echo 'Exec=$(installed_testdir)/$(notdir $<) --tap' >> $@.tmp; \ echo 'Output=TAP' >> $@.tmp; \ mv $@.tmp $@) CLEANFILES += $(installed_test_meta_DATA) endif parlatype-1.5.4/libparlatype/config.sub0000755000175000017500000010577513167645076015154 00000000000000#! /bin/sh # Configuration validation subroutine script. # Copyright 1992-2014 Free Software Foundation, Inc. timestamp='2014-09-11' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that # program. This Exception is an additional permission under section 7 # of the GNU General Public License, version 3 ("GPLv3"). # Please send patches with a ChangeLog entry to config-patches@gnu.org. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # You can get the latest version of this script from: # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS $0 [OPTION] ALIAS Canonicalize a configuration name. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright 1992-2014 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" exit 1 ;; *local*) # First pass through any local machine types. echo $1 exit ;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ knetbsd*-gnu* | netbsd*-gnu* | \ kopensolaris*-gnu* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; android-linux) os=-linux-android basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown ;; *) basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] then os=`echo $1 | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple | -axis | -knuth | -cray | -microblaze*) os= basic_machine=$1 ;; -bluegene*) os=-cnk ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 ;; -scout) ;; -wrs) os=-vxworks basic_machine=$1 ;; -chorusos*) os=-chorusos basic_machine=$1 ;; -chorusrdb) os=-chorusrdb basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco6) os=-sco5v6 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5v6*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -udk*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -lynx*178) os=-lynxos178 ;; -lynx*5) os=-lynxos5 ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ;; -windowsnt*) os=`echo $os | sed -e 's/windowsnt/winnt/'` ;; -psos*) os=-psos ;; -mint | -mint[0-9]*) basic_machine=m68k-atari os=-mint ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ | aarch64 | aarch64_be \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ | arc | arceb \ | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ | avr | avr32 \ | be32 | be64 \ | bfin \ | c4x | c8051 | clipper \ | d10v | d30v | dlx | dsp16xx \ | epiphany \ | fido | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | hexagon \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ | k1om \ | le32 | le64 \ | lm32 \ | m32c | m32r | m32rle | m68000 | m68k | m88k \ | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ | mips64octeon | mips64octeonel \ | mips64orion | mips64orionel \ | mips64r5900 | mips64r5900el \ | mips64vr | mips64vrel \ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ | mips64vr5900 | mips64vr5900el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa32r6 | mipsisa32r6el \ | mipsisa64 | mipsisa64el \ | mipsisa64r2 | mipsisa64r2el \ | mipsisa64r6 | mipsisa64r6el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ | mipsr5900 | mipsr5900el \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ | moxie \ | mt \ | msp430 \ | nds32 | nds32le | nds32be \ | nios | nios2 | nios2eb | nios2el \ | ns16k | ns32k \ | open8 | or1k | or1knd | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle \ | pyramid \ | riscv32 | riscv64 \ | rl78 | rx \ | score \ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ | spu \ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ | ubicom32 \ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ | we32k \ | x86 | xc16x | xstormy16 | xtensa \ | z8k | z80) basic_machine=$basic_machine-unknown ;; c54x) basic_machine=tic54x-unknown ;; c55x) basic_machine=tic55x-unknown ;; c6x) basic_machine=tic6x-unknown ;; m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip) basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ;; ms1) basic_machine=mt-unknown ;; strongarm | thumb | xscale) basic_machine=arm-unknown ;; xgate) basic_machine=$basic_machine-unknown os=-none ;; xscaleeb) basic_machine=armeb-unknown ;; xscaleel) basic_machine=armel-unknown ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ | aarch64-* | aarch64_be-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* | avr32-* \ | be32-* | be64-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* \ | c8051-* | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | hexagon-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* | iq2000-* \ | k1om-* \ | le32-* | le64-* \ | lm32-* \ | m32c-* | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ | microblaze-* | microblazeel-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ | mips64octeon-* | mips64octeonel-* \ | mips64orion-* | mips64orionel-* \ | mips64r5900-* | mips64r5900el-* \ | mips64vr-* | mips64vrel-* \ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ | mips64vr5900-* | mips64vr5900el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa32r6-* | mipsisa32r6el-* \ | mipsisa64-* | mipsisa64el-* \ | mipsisa64r2-* | mipsisa64r2el-* \ | mipsisa64r6-* | mipsisa64r6el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipsr5900-* | mipsr5900el-* \ | mipstx39-* | mipstx39el-* \ | mmix-* \ | mt-* \ | msp430-* \ | nds32-* | nds32le-* | nds32be-* \ | nios-* | nios2-* | nios2eb-* | nios2el-* \ | none-* | np1-* | ns16k-* | ns32k-* \ | open8-* \ | or1k*-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ | pyramid-* \ | rl78-* | romp-* | rs6000-* | rx-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ | tahoe-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tile*-* \ | tron-* \ | ubicom32-* \ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ | vax-* \ | we32k-* \ | x86-* | x86_64-* | xc16x-* | xps100-* \ | xstormy16-* | xtensa*-* \ | ymp-* \ | z8k-* | z80-*) ;; # Recognize the basic CPU types without company name, with glob match. xtensa*) basic_machine=$basic_machine-unknown ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) basic_machine=i386-unknown os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; a29khif) basic_machine=a29k-amd os=-udi ;; abacus) basic_machine=abacus-unknown ;; adobe68k) basic_machine=m68010-adobe os=-scout ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amd64) basic_machine=x86_64-pc ;; amd64-*) basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-unknown ;; amigaos | amigados) basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; apollo68bsd) basic_machine=m68k-apollo os=-bsd ;; aros) basic_machine=i386-pc os=-aros ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; blackfin) basic_machine=bfin-unknown os=-linux ;; blackfin-*) basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; bluegene*) basic_machine=powerpc-ibm os=-cnk ;; c54x-*) basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` ;; c55x-*) basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` ;; c6x-*) basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` ;; c90) basic_machine=c90-cray os=-unicos ;; cegcc) basic_machine=arm-unknown os=-cegcc ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | j90) basic_machine=j90-cray os=-unicos ;; craynv) basic_machine=craynv-cray os=-unicosmp ;; cr16 | cr16-*) basic_machine=cr16-unknown os=-elf ;; crds | unos) basic_machine=m68k-crds ;; crisv32 | crisv32-* | etraxfs*) basic_machine=crisv32-axis ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; crx) basic_machine=crx-unknown os=-elf ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; decsystem10* | dec10*) basic_machine=pdp10-dec os=-tops10 ;; decsystem20* | dec20*) basic_machine=pdp10-dec os=-tops20 ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; dicos) basic_machine=i686-pc os=-dicos ;; djgpp) basic_machine=i586-pc os=-msdosdjgpp ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2* | dpx2*-bull) basic_machine=m68k-bull os=-sysv3 ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson os=-ose ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; go32) basic_machine=i386-pc os=-go32 ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; h8300xray) basic_machine=h8300-hitachi os=-xray ;; h8500hms) basic_machine=h8500-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) basic_machine=hppa1.1-hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppa-next) os=-nextstep3 ;; hppaosf) basic_machine=hppa1.1-hp os=-osf ;; hppro) basic_machine=hppa1.1-hp os=-proelf ;; i370-ibm* | ibm*) basic_machine=i370-ibm ;; i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; i386-vsta | vsta) basic_machine=i386-unknown os=-vsta ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; m68knommu) basic_machine=m68k-unknown os=-linux ;; m68knommu-*) basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; m88k-omron*) basic_machine=m88k-omron ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; microblaze*) basic_machine=microblaze-xilinx ;; mingw64) basic_machine=x86_64-pc os=-mingw64 ;; mingw32) basic_machine=i686-pc os=-mingw32 ;; mingw32ce) basic_machine=arm-unknown os=-mingw32ce ;; miniframe) basic_machine=m68000-convergent ;; *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) basic_machine=m68k-atari os=-mint ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; monitor) basic_machine=m68k-rom68k os=-coff ;; morphos) basic_machine=powerpc-unknown os=-morphos ;; moxiebox) basic_machine=moxie-unknown os=-moxiebox ;; msdos) basic_machine=i386-pc os=-msdos ;; ms1-*) basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` ;; msys) basic_machine=i686-pc os=-msys ;; mvs) basic_machine=i370-ibm os=-mvs ;; nacl) basic_machine=le32-unknown os=-nacl ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; netbsd386) basic_machine=i386-unknown os=-netbsd ;; netwinder) basic_machine=armv4l-rebel os=-linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; necv70) basic_machine=v70-nec os=-sysv ;; next | m*-next ) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; mon960) basic_machine=i960-intel os=-mon960 ;; nonstopux) basic_machine=mips-compaq os=-nonstopux ;; np1) basic_machine=np1-gould ;; neo-tandem) basic_machine=neo-tandem ;; nse-tandem) basic_machine=nse-tandem ;; nsr-tandem) basic_machine=nsr-tandem ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf ;; openrisc | openrisc-*) basic_machine=or32-unknown ;; os400) basic_machine=powerpc-ibm os=-os400 ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose ;; os68k) basic_machine=m68k-none os=-os68k ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; parisc) basic_machine=hppa-unknown os=-linux ;; parisc-*) basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pc98) basic_machine=i386-pc ;; pc98-*) basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; pentium4) basic_machine=i786-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium4-*) basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc | ppcbe) basic_machine=powerpc-unknown ;; ppc-* | ppcbe-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little | ppc64-le | powerpc64-little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; pw32) basic_machine=i586-unknown os=-pw32 ;; rdos | rdos64) basic_machine=x86_64-pc os=-rdos ;; rdos32) basic_machine=i386-pc os=-rdos ;; rom68k) basic_machine=m68k-rom68k os=-coff ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; s390 | s390-*) basic_machine=s390-ibm ;; s390x | s390x-*) basic_machine=s390x-ibm ;; sa29200) basic_machine=a29k-amd os=-udi ;; sb1) basic_machine=mipsisa64sb1-unknown ;; sb1el) basic_machine=mipsisa64sb1el-unknown ;; sde) basic_machine=mipsisa32-sde os=-elf ;; sei) basic_machine=mips-sei os=-seiux ;; sequent) basic_machine=i386-sequent ;; sh) basic_machine=sh-hitachi os=-hms ;; sh5el) basic_machine=sh5le-unknown ;; sh64) basic_machine=sh64-unknown ;; sparclite-wrs | simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; st2000) basic_machine=m68k-tandem ;; stratus) basic_machine=i860-stratus os=-sysv4 ;; strongarm-* | thumb-*) basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; sv1) basic_machine=sv1-cray os=-unicos ;; symmetry) basic_machine=i386-sequent os=-dynix ;; t3e) basic_machine=alphaev5-cray os=-unicos ;; t90) basic_machine=t90-cray os=-unicos ;; tile*) basic_machine=$basic_machine-unknown os=-linux-gnu ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; toad1) basic_machine=pdp10-xkl os=-tops20 ;; tower | tower-32) basic_machine=m68k-ncr ;; tpf) basic_machine=s390x-ibm os=-tpf ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; v810 | necv810) basic_machine=v810-nec os=-none ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; w65*) basic_machine=w65-wdc os=-none ;; w89k-*) basic_machine=hppa1.1-winbond os=-proelf ;; xbox) basic_machine=i686-pc os=-mingw32 ;; xps | xps100) basic_machine=xps100-honeywell ;; xscale-* | xscalee[bl]-*) basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` ;; ymp) basic_machine=ymp-cray os=-unicos ;; z8k-*-coff) basic_machine=z8k-unknown os=-sim ;; z80-*-coff) basic_machine=z80-unknown os=-sim ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) basic_machine=hppa1.1-winbond ;; op50n) basic_machine=hppa1.1-oki ;; op60c) basic_machine=hppa1.1-oki ;; romp) basic_machine=romp-ibm ;; mmix) basic_machine=mmix-knuth ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp10) # there are many clones, so DEC is not a safe bet basic_machine=pdp10-unknown ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) basic_machine=sparc-sun ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; mac | mpw | mac-mpw) basic_machine=m68k-apple ;; pmac | pmac-mpw) basic_machine=powerpc-apple ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. -auroraux) os=-auroraux ;; -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -svr4*) os=-sysv4 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # First accept the basic system types. # The portable systems comes first. # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ | -sym* | -kopensolaris* | -plan9* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* | -aros* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ | -bitrig* | -openbsd* | -solidbsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* | -cegcc* \ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ | -linux-newlib* | -linux-musl* | -linux-uclibc* \ | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) case $basic_machine in x86-* | i*86-*) ;; *) os=-nto$os ;; esac ;; -nto-qnx*) ;; -nto*) os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; -linux-dietlibc) os=-linux-dietlibc ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo $os | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition ;; -os400*) os=-os400 ;; -wince*) os=-wince ;; -osfrose*) os=-osfrose ;; -osf*) os=-osf ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -atheos*) os=-atheos ;; -syllable*) os=-syllable ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; -nova*) os=-rtmk-nova ;; -ns2 ) os=-nextstep2 ;; -nsk*) os=-nsk ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -tpf*) os=-tpf ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -ose*) os=-ose ;; -es1800*) os=-ose ;; -xenix) os=-xenix ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -aros*) os=-aros ;; -zvmoe) os=-zvmoe ;; -dicos*) os=-dicos ;; -nacl*) ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in score-*) os=-elf ;; spu-*) os=-elf ;; *-acorn) os=-riscix1.2 ;; arm*-rebel) os=-linux ;; arm*-semi) os=-aout ;; c4x-* | tic4x-*) os=-coff ;; c8051-*) os=-elf ;; hexagon-*) os=-elf ;; tic54x-*) os=-coff ;; tic55x-*) os=-coff ;; tic6x-*) os=-coff ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 ;; m68*-cisco) os=-aout ;; mep-*) os=-elf ;; mips*-cisco) os=-elf ;; mips*-*) os=-elf ;; or32-*) os=-coff ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; *-be) os=-beos ;; *-haiku) os=-haiku ;; *-ibm) os=-aix ;; *-knuth) os=-mmixware ;; *-wec) os=-proelf ;; *-winbond) os=-proelf ;; *-oki) os=-proelf ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next ) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-next) os=-nextstep3 ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) os=-coff ;; *-*bug) os=-coff ;; *-apple) os=-macos ;; *-atari*) os=-mint ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -cnk*|-aix*) vendor=ibm ;; -beos*) vendor=be ;; -hpux*) vendor=hp ;; -mpeix*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs* | -opened*) vendor=ibm ;; -os400*) vendor=ibm ;; -ptx*) vendor=sequent ;; -tpf*) vendor=ibm ;; -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) vendor=apple ;; -hms*) vendor=hitachi ;; -mpw* | -macos*) vendor=apple ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; -vos*) vendor=stratus ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os exit # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: parlatype-1.5.4/libparlatype/po/0000755000175000017500000000000013204324043013624 500000000000000parlatype-1.5.4/libparlatype/po/it.po0000644000175000017500000001375313176574165014555 00000000000000# Italian translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Luca Ciavatta 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-03-26 14:25+0200\n" "PO-Revision-Date: 2017-01-17 16:59+0000\n" "Last-Translator: Luca Ciavatta \n" "Language-Team: Italian \n" "Language: it\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-01-26 11:32+0000\n" "X-Generator: Launchpad (build 18315)\n" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:436 #, c-format msgid "URI not valid: %s" msgstr "URI non valido: %s" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:448 #, c-format msgid "File not found: %s" msgstr "File non trovato: %s" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 #: ../src/pt-waveviewer.c:1024 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is a time format, like "2:05:30.1" for 2 #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1128 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" msgstr "%d:%02d:%02d.%d" #. Translators: This is a time format, like "2:05:30.12" for 2 #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1135 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" msgstr "%d:%02d:%02d.%02d" #. Translators: This is a time format, like "05:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. #: ../src/pt-player.c:1152 #, c-format msgctxt "short time format" msgid "%02d:%02d" msgstr "%02d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1159 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" msgstr "%02d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1166 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" msgstr "%02d:%02d.%02d" #. Translators: This is a time format, like "5:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 #: ../src/pt-waveviewer.c:1026 #, c-format msgctxt "shortest time format" msgid "%d:%02d" msgstr "%d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1186 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" msgstr "%d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1193 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" #: ../src/pt-player.c:1495 #, c-format msgid "Failed to load a plugin." msgstr "Impossibile caricare un plugin." #: ../src/pt-progress-dialog.c:148 msgid "Loading file..." msgstr "Caricamento file..." #: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 msgid "Failed to open temporary file." msgstr "Impossibile aprire il file temporaneo." #: ../src/pt-waveloader.c:350 msgid "Failed to setup GStreamer pipeline." msgstr "Impossibile configurare la pipeline di GStreamer." #: ../src/pt-waveloader.c:369 msgid "Failed to start GStreamer pipeline." msgstr "Impossibile avviare la pipeline di GStreamer." #: ../src/pt-waveviewer.c:1381 msgid "Follow cursor" msgstr "Seguire il cursore" #: ../src/pt-waveviewer.c:1382 msgid "Scroll automatically to the cursor's position" msgstr "Andare automaticamente alla posizione del cursore" #: ../src/pt-waveviewer.c:1398 msgid "Fixed cursor" msgstr "Cursore fisso" #: ../src/pt-waveviewer.c:1399 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" "Se TRUE, il cursore si trova in posizione fissa e la forma d'onda è in " "movimento.\n" "Se FALSE, il cursore si muove." #: ../src/pt-waveviewer.c:1413 msgid "Show ruler" msgstr "Mostra righello" #: ../src/pt-waveviewer.c:1414 msgid "Show the time scale with time marks" msgstr "Mostra la scala di tempo con i marcatori temporali" #~ msgctxt "long time format, 1 digit" #~ msgid "%d:%02d:%02d.%01d" #~ msgstr "%d:%02d:%02d.%01d" #~ msgctxt "shortest time format, 1 digit" #~ msgid "%d:%02d.%01d" #~ msgstr "%d:%02d.%01d" #~ msgid "Cursor position" #~ msgstr "Posizione cursore" #~ msgid "Cursor's position in 1/1000 seconds" #~ msgstr "Posizione cursore a 1/1000 secondi" parlatype-1.5.4/libparlatype/po/he.po0000644000175000017500000001175113176574165014531 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-03-26 14:25+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: he\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1)\n" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:436 #, c-format msgid "URI not valid: %s" msgstr "" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:448 #, c-format msgid "File not found: %s" msgstr "" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 #: ../src/pt-waveviewer.c:1024 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "" #. Translators: This is a time format, like "2:05:30.1" for 2 #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1128 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" msgstr "" #. Translators: This is a time format, like "2:05:30.12" for 2 #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1135 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" msgstr "" #. Translators: This is a time format, like "05:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. #: ../src/pt-player.c:1152 #, c-format msgctxt "short time format" msgid "%02d:%02d" msgstr "" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1159 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" msgstr "" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1166 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" msgstr "" #. Translators: This is a time format, like "5:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 #: ../src/pt-waveviewer.c:1026 #, c-format msgctxt "shortest time format" msgid "%d:%02d" msgstr "" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1186 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" msgstr "" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1193 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "" #: ../src/pt-player.c:1495 #, c-format msgid "Failed to load a plugin." msgstr "" #: ../src/pt-progress-dialog.c:148 msgid "Loading file..." msgstr "" #: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 msgid "Failed to open temporary file." msgstr "" #: ../src/pt-waveloader.c:350 msgid "Failed to setup GStreamer pipeline." msgstr "" #: ../src/pt-waveloader.c:369 msgid "Failed to start GStreamer pipeline." msgstr "" #: ../src/pt-waveviewer.c:1381 msgid "Follow cursor" msgstr "" #: ../src/pt-waveviewer.c:1382 msgid "Scroll automatically to the cursor's position" msgstr "" #: ../src/pt-waveviewer.c:1398 msgid "Fixed cursor" msgstr "" #: ../src/pt-waveviewer.c:1399 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" #: ../src/pt-waveviewer.c:1413 msgid "Show ruler" msgstr "" #: ../src/pt-waveviewer.c:1414 msgid "Show the time scale with time marks" msgstr "" parlatype-1.5.4/libparlatype/po/kab.po0000644000175000017500000001341513176574165014671 00000000000000# Kabyle translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Belkacem Mohammed , 2017 # Slimane Amiri , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-03-26 14:25+0200\n" "PO-Revision-Date: 2017-01-17 15:16+0000\n" "Last-Translator: Slimane Amiri \n" "Language-Team: Kabyle \n" "Language: kab\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-01-26 11:32+0000\n" "X-Generator: Launchpad (build 18315)\n" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:436 #, c-format msgid "URI not valid: %s" msgstr "Tansa URI mačči d tameɣtut: %s" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:448 #, c-format msgid "File not found: %s" msgstr "Ulac afaylu: %s" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 #: ../src/pt-waveviewer.c:1024 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is a time format, like "2:05:30.1" for 2 #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1128 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" msgstr "%d:%02d:%02d.%d" #. Translators: This is a time format, like "2:05:30.12" for 2 #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1135 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" msgstr "%d:%02d:%02d.%02d" #. Translators: This is a time format, like "05:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. #: ../src/pt-player.c:1152 #, c-format msgctxt "short time format" msgid "%02d:%02d" msgstr "%02d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1159 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" msgstr "%02d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1166 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" msgstr "%02d:%02d.%02d" #. Translators: This is a time format, like "5:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 #: ../src/pt-waveviewer.c:1026 #, c-format msgctxt "shortest time format" msgid "%d:%02d" msgstr "%d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1186 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" msgstr "%d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1193 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" #: ../src/pt-player.c:1495 #, c-format msgid "Failed to load a plugin." msgstr "Ur izmir ara ad d-isali ameṭaḍ" #: ../src/pt-progress-dialog.c:148 msgid "Loading file..." msgstr "Asali n ufaylu..." #: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 msgid "Failed to open temporary file." msgstr "Ur izmir ara ad d-islai afaylu askudan." #: ../src/pt-waveloader.c:350 msgid "Failed to setup GStreamer pipeline." msgstr "Ur izmir ara ad iswel ajeɛbub GStreamer." #: ../src/pt-waveloader.c:369 msgid "Failed to start GStreamer pipeline." msgstr "Ur izmir ara ad isenker ajeɛbub GStreamer." #: ../src/pt-waveviewer.c:1381 msgid "Follow cursor" msgstr "Ḍfer taḥnaccaṭ" #: ../src/pt-waveviewer.c:1382 msgid "Scroll automatically to the cursor's position" msgstr "" #: ../src/pt-waveviewer.c:1398 msgid "Fixed cursor" msgstr "" #: ../src/pt-waveviewer.c:1399 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" #: ../src/pt-waveviewer.c:1413 msgid "Show ruler" msgstr "" #: ../src/pt-waveviewer.c:1414 msgid "Show the time scale with time marks" msgstr "" #~ msgctxt "long time format, 1 digit" #~ msgid "%d:%02d:%02d.%01d" #~ msgstr "%d:%02d:%02d.%01d" #~ msgctxt "shortest time format, 1 digit" #~ msgid "%d:%02d.%01d" #~ msgstr "%d:%02d.%01d" #~ msgid "Cursor position" #~ msgstr "Adig n teḥnaccaṭ" #~ msgid "Cursor's position in 1/1000 seconds" #~ msgstr "Adig n teḥnaccaṭ 1/1000 n tasinin" parlatype-1.5.4/libparlatype/po/Makefile.in.in0000644000175000017500000001604613167645026016244 00000000000000# Makefile for program source directory in GNU NLS utilities package. # Copyright (C) 1995, 1996, 1997 by Ulrich Drepper # Copyright (C) 2004-2008 Rodney Dawes # # This file may be copied and used freely without restrictions. It may # be used in projects which are not available under a GNU Public License, # but which still want to provide support for the GNU gettext functionality. # # - Modified by Owen Taylor to use GETTEXT_PACKAGE # instead of PACKAGE and to look for po2tbl in ./ not in intl/ # # - Modified by jacob berkman to install # Makefile.in.in and po2tbl.sed.in for use with glib-gettextize # # - Modified by Rodney Dawes for use with intltool # # We have the following line for use by intltoolize: # INTLTOOL_MAKEFILE GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ PACKAGE = @PACKAGE@ VERSION = @VERSION@ SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ top_builddir = @top_builddir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ datadir = @datadir@ datarootdir = @datarootdir@ libdir = @libdir@ DATADIRNAME = @DATADIRNAME@ itlocaledir = $(prefix)/$(DATADIRNAME)/locale subdir = po install_sh = @install_sh@ # Automake >= 1.8 provides @mkdir_p@. # Until it can be supposed, use the safe fallback: mkdir_p = $(install_sh) -d INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ GMSGFMT = @GMSGFMT@ MSGFMT = @MSGFMT@ XGETTEXT = @XGETTEXT@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ MSGMERGE = INTLTOOL_EXTRACT="$(INTLTOOL_EXTRACT)" XGETTEXT="$(XGETTEXT)" srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --dist GENPOT = INTLTOOL_EXTRACT="$(INTLTOOL_EXTRACT)" XGETTEXT="$(XGETTEXT)" srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --pot ALL_LINGUAS = @ALL_LINGUAS@ PO_LINGUAS=$(shell if test -r $(srcdir)/LINGUAS; then grep -v "^\#" $(srcdir)/LINGUAS; else echo "$(ALL_LINGUAS)"; fi) USER_LINGUAS=$(shell if test -n "$(LINGUAS)"; then LLINGUAS="$(LINGUAS)"; ALINGUAS="$(ALL_LINGUAS)"; for lang in $$LLINGUAS; do if test -n "`grep \^$$lang$$ $(srcdir)/LINGUAS 2>/dev/null`" -o -n "`echo $$ALINGUAS|tr ' ' '\n'|grep \^$$lang$$`"; then printf "$$lang "; fi; done; fi) USE_LINGUAS=$(shell if test -n "$(USER_LINGUAS)" -o -n "$(LINGUAS)"; then LLINGUAS="$(USER_LINGUAS)"; else if test -n "$(PO_LINGUAS)"; then LLINGUAS="$(PO_LINGUAS)"; else LLINGUAS="$(ALL_LINGUAS)"; fi; fi; for lang in $$LLINGUAS; do printf "$$lang "; done) POFILES=$(shell LINGUAS="$(PO_LINGUAS)"; for lang in $$LINGUAS; do printf "$$lang.po "; done) DISTFILES = Makefile.in.in POTFILES.in $(POFILES) EXTRA_DISTFILES = ChangeLog POTFILES.skip Makevars LINGUAS POTFILES = \ # This comment gets stripped out CATALOGS=$(shell LINGUAS="$(USE_LINGUAS)"; for lang in $$LINGUAS; do printf "$$lang.gmo "; done) .SUFFIXES: .SUFFIXES: .po .pox .gmo .mo .msg .cat AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ INTLTOOL_V_MSGFMT = $(INTLTOOL__v_MSGFMT_$(V)) INTLTOOL__v_MSGFMT_= $(INTLTOOL__v_MSGFMT_$(AM_DEFAULT_VERBOSITY)) INTLTOOL__v_MSGFMT_0 = @echo " MSGFMT" $@; .po.pox: $(MAKE) $(GETTEXT_PACKAGE).pot $(MSGMERGE) $< $(GETTEXT_PACKAGE).pot -o $*.pox .po.mo: $(INTLTOOL_V_MSGFMT)$(MSGFMT) -o $@ $< .po.gmo: $(INTLTOOL_V_MSGFMT)file=`echo $* | sed 's,.*/,,'`.gmo \ && rm -f $$file && $(GMSGFMT) -o $$file $< .po.cat: sed -f ../intl/po2msg.sed < $< > $*.msg \ && rm -f $@ && gencat $@ $*.msg all: all-@USE_NLS@ all-yes: $(CATALOGS) all-no: $(GETTEXT_PACKAGE).pot: $(POTFILES) $(GENPOT) install: install-data install-data: install-data-@USE_NLS@ install-data-no: all install-data-yes: all linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ dir=$(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES; \ $(mkdir_p) $$dir; \ if test -r $$lang.gmo; then \ $(INSTALL_DATA) $$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \ echo "installing $$lang.gmo as $$dir/$(GETTEXT_PACKAGE).mo"; \ else \ $(INSTALL_DATA) $(srcdir)/$$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \ echo "installing $(srcdir)/$$lang.gmo as" \ "$$dir/$(GETTEXT_PACKAGE).mo"; \ fi; \ if test -r $$lang.gmo.m; then \ $(INSTALL_DATA) $$lang.gmo.m $$dir/$(GETTEXT_PACKAGE).mo.m; \ echo "installing $$lang.gmo.m as $$dir/$(GETTEXT_PACKAGE).mo.m"; \ else \ if test -r $(srcdir)/$$lang.gmo.m ; then \ $(INSTALL_DATA) $(srcdir)/$$lang.gmo.m \ $$dir/$(GETTEXT_PACKAGE).mo.m; \ echo "installing $(srcdir)/$$lang.gmo.m as" \ "$$dir/$(GETTEXT_PACKAGE).mo.m"; \ else \ true; \ fi; \ fi; \ done # Empty stubs to satisfy archaic automake needs dvi info ctags tags CTAGS TAGS ID: # Define this as empty until I found a useful application. install-exec installcheck: uninstall: linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \ rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \ done check: all $(GETTEXT_PACKAGE).pot rm -f missing notexist srcdir=$(srcdir) $(INTLTOOL_UPDATE) -m if [ -r missing -o -r notexist ]; then \ exit 1; \ fi mostlyclean: rm -f *.pox $(GETTEXT_PACKAGE).pot *.old.po cat-id-tbl.tmp rm -f .intltool-merge-cache clean: mostlyclean distclean: clean rm -f Makefile Makefile.in POTFILES stamp-it rm -f *.mo *.msg *.cat *.cat.m *.gmo maintainer-clean: distclean @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." rm -f Makefile.in.in distdir = ../$(PACKAGE)-$(VERSION)/$(subdir) dist distdir: $(DISTFILES) dists="$(DISTFILES)"; \ extra_dists="$(EXTRA_DISTFILES)"; \ for file in $$extra_dists; do \ test -f $(srcdir)/$$file && dists="$$dists $(srcdir)/$$file"; \ done; \ for file in $$dists; do \ test -f $$file || file="$(srcdir)/$$file"; \ ln $$file $(distdir) 2> /dev/null \ || cp -p $$file $(distdir); \ done update-po: Makefile $(MAKE) $(GETTEXT_PACKAGE).pot tmpdir=`pwd`; \ linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ echo "$$lang:"; \ result="`$(MSGMERGE) -o $$tmpdir/$$lang.new.po $$lang`"; \ if $$result; then \ if cmp $(srcdir)/$$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ rm -f $$tmpdir/$$lang.new.po; \ else \ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ :; \ else \ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ rm -f $$tmpdir/$$lang.new.po; \ exit 1; \ fi; \ fi; \ else \ echo "msgmerge for $$lang.gmo failed!"; \ rm -f $$tmpdir/$$lang.new.po; \ fi; \ done Makefile POTFILES: stamp-it @if test ! -f $@; then \ rm -f stamp-it; \ $(MAKE) stamp-it; \ fi stamp-it: Makefile.in.in $(top_builddir)/config.status POTFILES.in cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/Makefile.in CONFIG_HEADERS= CONFIG_LINKS= \ $(SHELL) ./config.status # Tell versions [3.59,3.63) of GNU make not to export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: parlatype-1.5.4/libparlatype/po/ca.po0000644000175000017500000001367313176574164014524 00000000000000# Catalan translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # VPablo , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-03-26 14:25+0200\n" "PO-Revision-Date: 2017-01-19 18:15+0000\n" "Last-Translator: VPablo \n" "Language-Team: Catalan \n" "Language: ca\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-01-20 21:44+0000\n" "X-Generator: Launchpad (build 18302)\n" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:436 #, c-format msgid "URI not valid: %s" msgstr "URI no vàlida:%s" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:448 #, c-format msgid "File not found: %s" msgstr "No s'ha trobat el fitxer: %s" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 #: ../src/pt-waveviewer.c:1024 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is a time format, like "2:05:30.1" for 2 #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1128 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" msgstr "%d:%02d:%02d.%d" #. Translators: This is a time format, like "2:05:30.12" for 2 #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1135 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" msgstr "%d:%02d:%02d.%02d" #. Translators: This is a time format, like "05:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. #: ../src/pt-player.c:1152 #, c-format msgctxt "short time format" msgid "%02d:%02d" msgstr "%02d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1159 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" msgstr "%02d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1166 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" msgstr "%02d:%02d.%02d" #. Translators: This is a time format, like "5:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 #: ../src/pt-waveviewer.c:1026 #, c-format msgctxt "shortest time format" msgid "%d:%02d" msgstr "%d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1186 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" msgstr "%d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1193 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" #: ../src/pt-player.c:1495 #, c-format msgid "Failed to load a plugin." msgstr "Ha fallat la càrrega d'un plugin." #: ../src/pt-progress-dialog.c:148 msgid "Loading file..." msgstr "Carregant fitxer..." #: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 msgid "Failed to open temporary file." msgstr "Ha fallat l'apertura d'un fitxer temporal." #: ../src/pt-waveloader.c:350 msgid "Failed to setup GStreamer pipeline." msgstr "Ha fallat la configuració de la canonada GStreamer." #: ../src/pt-waveloader.c:369 msgid "Failed to start GStreamer pipeline." msgstr "Ha fallat l'inici de la canonada GStreamer." #: ../src/pt-waveviewer.c:1381 msgid "Follow cursor" msgstr "Segueix el cursor" #: ../src/pt-waveviewer.c:1382 msgid "Scroll automatically to the cursor's position" msgstr "Desplaça automàticament a la posició del cursor" #: ../src/pt-waveviewer.c:1398 msgid "Fixed cursor" msgstr "Cursor fixe" #: ../src/pt-waveviewer.c:1399 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" "Si VERDADER, el cursor està a una posició fixa i la ona es mou.\n" "Si FALS, el curso es mou." #: ../src/pt-waveviewer.c:1413 msgid "Show ruler" msgstr "Mostra regla" #: ../src/pt-waveviewer.c:1414 msgid "Show the time scale with time marks" msgstr "Mostra la escala de temps amb marques" #~ msgctxt "long time format, 1 digit" #~ msgid "%d:%02d:%02d.%01d" #~ msgstr "%d:%02d:%02d.%01d" #~ msgctxt "shortest time format, 1 digit" #~ msgid "%d:%02d.%01d" #~ msgstr "%d:%02d.%01d" #~ msgid "Cursor position" #~ msgstr "Posició del cursor" #~ msgid "Cursor's position in 1/1000 seconds" #~ msgstr "Posició del cursor a 1/1000 segons" parlatype-1.5.4/libparlatype/po/fr.po0000644000175000017500000001402113176574165014535 00000000000000# French translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # archi02 , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-03-26 14:25+0200\n" "PO-Revision-Date: 2017-01-25 11:24+0000\n" "Last-Translator: archi02 \n" "Language-Team: French \n" "Language: fr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-01-26 11:32+0000\n" "X-Generator: Launchpad (build 18315)\n" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:436 #, c-format msgid "URI not valid: %s" msgstr "Adresse non valide : %s" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:448 #, c-format msgid "File not found: %s" msgstr "Fichier non trouvé: %s" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 #: ../src/pt-waveviewer.c:1024 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is a time format, like "2:05:30.1" for 2 #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1128 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" msgstr "%d:%02d:%02d.%d" #. Translators: This is a time format, like "2:05:30.12" for 2 #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1135 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" msgstr "%d:%02d:%02d.%02d" #. Translators: This is a time format, like "05:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. #: ../src/pt-player.c:1152 #, c-format msgctxt "short time format" msgid "%02d:%02d" msgstr "%02d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1159 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" msgstr "%02d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1166 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" msgstr "%02d:%02d.%02d" #. Translators: This is a time format, like "5:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 #: ../src/pt-waveviewer.c:1026 #, c-format msgctxt "shortest time format" msgid "%d:%02d" msgstr "%d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1186 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" msgstr "%d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1193 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" #: ../src/pt-player.c:1495 #, c-format msgid "Failed to load a plugin." msgstr "Échec de chargement du plugin" #: ../src/pt-progress-dialog.c:148 msgid "Loading file..." msgstr "Chargement du fichier..." #: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 msgid "Failed to open temporary file." msgstr "Échec d'ouverture du fichier temporaire." #: ../src/pt-waveloader.c:350 msgid "Failed to setup GStreamer pipeline." msgstr "Échec de configuration du pipeline GStreamer." #: ../src/pt-waveloader.c:369 msgid "Failed to start GStreamer pipeline." msgstr "Échec du lancement du pipeline Gstreamer." #: ../src/pt-waveviewer.c:1381 msgid "Follow cursor" msgstr "Suivre le curseur" #: ../src/pt-waveviewer.c:1382 msgid "Scroll automatically to the cursor's position" msgstr "Défiler automatiquement jusqu'à la position du curseur" #: ../src/pt-waveviewer.c:1398 msgid "Fixed cursor" msgstr "Curseur positionné" #: ../src/pt-waveviewer.c:1399 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" "Si VRAI, le curseur est placé à une position fixe et le graphique " "représentant le spectre sonore se déplace.\n" "Si FAUX, le curseur se déplace." #: ../src/pt-waveviewer.c:1413 msgid "Show ruler" msgstr "Montrer la règle" #: ../src/pt-waveviewer.c:1414 msgid "Show the time scale with time marks" msgstr "Montrer l'échelle de temps avec les marqueurs" #~ msgctxt "long time format, 1 digit" #~ msgid "%d:%02d:%02d.%01d" #~ msgstr "%d:%02d:%02d.%01d" #~ msgctxt "shortest time format, 1 digit" #~ msgid "%d:%02d.%01d" #~ msgstr "%d:%02d.%01d" #~ msgid "Cursor position" #~ msgstr "Position du curseur" #~ msgid "Cursor's position in 1/1000 seconds" #~ msgstr "Position du curseur à 1/1000 secondes" parlatype-1.5.4/libparlatype/po/lv.po0000644000175000017500000001222213176574165014550 00000000000000# Latvian translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Jānis Marks Gailis , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-03-26 14:25+0200\n" "PO-Revision-Date: 2017-01-17 21:20+0000\n" "Last-Translator: Jānis Marks Gailis \n" "Language-Team: Latvian \n" "Language: lv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-01-26 11:32+0000\n" "X-Generator: Launchpad (build 18315)\n" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:436 #, c-format msgid "URI not valid: %s" msgstr "" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:448 #, c-format msgid "File not found: %s" msgstr "Datne nav atrasta: %s" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 #: ../src/pt-waveviewer.c:1024 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "" #. Translators: This is a time format, like "2:05:30.1" for 2 #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1128 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" msgstr "" #. Translators: This is a time format, like "2:05:30.12" for 2 #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1135 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" msgstr "" #. Translators: This is a time format, like "05:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. #: ../src/pt-player.c:1152 #, c-format msgctxt "short time format" msgid "%02d:%02d" msgstr "" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1159 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" msgstr "" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1166 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" msgstr "" #. Translators: This is a time format, like "5:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 #: ../src/pt-waveviewer.c:1026 #, c-format msgctxt "shortest time format" msgid "%d:%02d" msgstr "" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1186 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" msgstr "" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1193 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "" #: ../src/pt-player.c:1495 #, c-format msgid "Failed to load a plugin." msgstr "" #: ../src/pt-progress-dialog.c:148 msgid "Loading file..." msgstr "Ielādē datni…" #: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 msgid "Failed to open temporary file." msgstr "Neizdevās atvērt pagaidu datni." #: ../src/pt-waveloader.c:350 msgid "Failed to setup GStreamer pipeline." msgstr "" #: ../src/pt-waveloader.c:369 msgid "Failed to start GStreamer pipeline." msgstr "" #: ../src/pt-waveviewer.c:1381 msgid "Follow cursor" msgstr "" #: ../src/pt-waveviewer.c:1382 msgid "Scroll automatically to the cursor's position" msgstr "" #: ../src/pt-waveviewer.c:1398 msgid "Fixed cursor" msgstr "" #: ../src/pt-waveviewer.c:1399 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" #: ../src/pt-waveviewer.c:1413 msgid "Show ruler" msgstr "" #: ../src/pt-waveviewer.c:1414 msgid "Show the time scale with time marks" msgstr "" parlatype-1.5.4/libparlatype/po/en_GB.po0000644000175000017500000001371313176574165015107 00000000000000# English (United Kingdom) translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Anthony Harrington , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-03-26 14:25+0200\n" "PO-Revision-Date: 2017-01-17 22:14+0000\n" "Last-Translator: Anthony Harrington 😁 \n" "Language-Team: English (United Kingdom) \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-01-20 20:44+0000\n" "X-Generator: Launchpad (build 18302)\n" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:436 #, c-format msgid "URI not valid: %s" msgstr "URI not valid: %s" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:448 #, c-format msgid "File not found: %s" msgstr "File not found: %s" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 #: ../src/pt-waveviewer.c:1024 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is a time format, like "2:05:30.1" for 2 #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1128 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" msgstr "%d:%02d:%02d.%d" #. Translators: This is a time format, like "2:05:30.12" for 2 #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1135 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" msgstr "%d:%02d:%02d.%02d" #. Translators: This is a time format, like "05:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. #: ../src/pt-player.c:1152 #, c-format msgctxt "short time format" msgid "%02d:%02d" msgstr "%02d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1159 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" msgstr "%02d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1166 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" msgstr "%02d:%02d.%02d" #. Translators: This is a time format, like "5:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 #: ../src/pt-waveviewer.c:1026 #, c-format msgctxt "shortest time format" msgid "%d:%02d" msgstr "%d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1186 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" msgstr "%d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1193 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" #: ../src/pt-player.c:1495 #, c-format msgid "Failed to load a plugin." msgstr "Failed to load a plugin." #: ../src/pt-progress-dialog.c:148 msgid "Loading file..." msgstr "Loading file..." #: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 msgid "Failed to open temporary file." msgstr "Failed to open temporary file." #: ../src/pt-waveloader.c:350 msgid "Failed to setup GStreamer pipeline." msgstr "Failed to setup GStreamer pipeline." #: ../src/pt-waveloader.c:369 msgid "Failed to start GStreamer pipeline." msgstr "Failed to start GStreamer pipeline." #: ../src/pt-waveviewer.c:1381 msgid "Follow cursor" msgstr "Follow cursor" #: ../src/pt-waveviewer.c:1382 msgid "Scroll automatically to the cursor's position" msgstr "Scroll automatically to the cursor's position" #: ../src/pt-waveviewer.c:1398 msgid "Fixed cursor" msgstr "Fixed cursor" #: ../src/pt-waveviewer.c:1399 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." #: ../src/pt-waveviewer.c:1413 msgid "Show ruler" msgstr "Show ruler" #: ../src/pt-waveviewer.c:1414 msgid "Show the time scale with time marks" msgstr "Show the time scale with time marks" #~ msgctxt "long time format, 1 digit" #~ msgid "%d:%02d:%02d.%01d" #~ msgstr "%d:%02d:%02d.%01d" #~ msgctxt "shortest time format, 1 digit" #~ msgid "%d:%02d.%01d" #~ msgstr "%d:%02d.%01d" #~ msgid "Cursor position" #~ msgstr "Cursor position" #~ msgid "Cursor's position in 1/1000 seconds" #~ msgstr "Cursor's position in 1/1000 seconds" parlatype-1.5.4/libparlatype/po/de.po0000644000175000017500000001372513176574165014530 00000000000000# German translations for parlatype. # Copyright (C) 2016 Gabor Karsay # This file is distributed under the same license as the parlatype package. # Gabor Karsay , 2016. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-03-26 14:25+0200\n" "PO-Revision-Date: 2016-12-04 15:50+0100\n" "Last-Translator: Gabor Karsay \n" "Language-Team: Deutsch <>\n" "Language: de\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1)\n" "X-Generator: Gtranslator 2.91.6\n" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:436 #, c-format msgid "URI not valid: %s" msgstr "URI nicht gültig: %s" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:448 #, c-format msgid "File not found: %s" msgstr "Datei nicht gefunden: %s" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 #: ../src/pt-waveviewer.c:1024 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is a time format, like "2:05:30.1" for 2 #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1128 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" msgstr "%d:%02d:%02d.%d" #. Translators: This is a time format, like "2:05:30.12" for 2 #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1135 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" msgstr "%d:%02d:%02d.%02d" #. Translators: This is a time format, like "05:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. #: ../src/pt-player.c:1152 #, c-format msgctxt "short time format" msgid "%02d:%02d" msgstr "%02d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1159 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" msgstr "%02d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1166 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" msgstr "%02d:%02d.%02d" #. Translators: This is a time format, like "5:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 #: ../src/pt-waveviewer.c:1026 #, c-format msgctxt "shortest time format" msgid "%d:%02d" msgstr "%d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1186 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" msgstr "%d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1193 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" #: ../src/pt-player.c:1495 #, c-format msgid "Failed to load a plugin." msgstr "Ein Plugin konnte nicht geladen werden." #: ../src/pt-progress-dialog.c:148 msgid "Loading file..." msgstr "Lade Datei …" #: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 msgid "Failed to open temporary file." msgstr "Die temporäre Datei konnte nicht geöffnet werden." #: ../src/pt-waveloader.c:350 msgid "Failed to setup GStreamer pipeline." msgstr "Die GStreamer-Pipeline konnte nicht eingerichtet werden." #: ../src/pt-waveloader.c:369 msgid "Failed to start GStreamer pipeline." msgstr "Die GStreamer-Pipeline konnte nicht gestartet werden." #: ../src/pt-waveviewer.c:1381 msgid "Follow cursor" msgstr "Cursor folgen" #: ../src/pt-waveviewer.c:1382 msgid "Scroll automatically to the cursor's position" msgstr "Scrollt automatisch zur Cursorposition" #: ../src/pt-waveviewer.c:1398 msgid "Fixed cursor" msgstr "Fixierter Cursor" #: ../src/pt-waveviewer.c:1399 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" "Wenn WAHR, befindet sich der Cursor an einer festen Position und die " "Wellenform bewegt sich.\n" "Wenn FALSCH, bewegt sich der Cursor." #: ../src/pt-waveviewer.c:1413 msgid "Show ruler" msgstr "Zeitskala anzeigen" #: ../src/pt-waveviewer.c:1414 msgid "Show the time scale with time marks" msgstr "Zeigt die Zeitskala mit Zeitmarkierungen" #~ msgctxt "long time format, 1 digit" #~ msgid "%d:%02d:%02d.%01d" #~ msgstr "%d:%02d:%02d.%01d" #~ msgctxt "shortest time format, 1 digit" #~ msgid "%d:%02d.%01d" #~ msgstr "%d:%02d.%01d" #~ msgid "Cursor position" #~ msgstr "Cursorposition" #~ msgid "Cursor's position in 1/1000 seconds" #~ msgstr "Position des Cursors in 1/1000 Sekunden" parlatype-1.5.4/libparlatype/po/es.po0000644000175000017500000001316113201343614014517 00000000000000# Spanish translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # VPablo , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-04-18 20:55+0200\n" "PO-Revision-Date: 2017-08-11 09:39+0000\n" "Last-Translator: Adolfo Jayme \n" "Language-Team: Spanish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-11-10 15:36+0000\n" "X-Generator: Launchpad (build 18498)\n" "Language: es\n" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:436 #, c-format msgid "URI not valid: %s" msgstr "URI no válido: %s" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:448 #, c-format msgid "File not found: %s" msgstr "Archivo no encontrado: %s" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:343 #: ../src/pt-waveviewer.c:1075 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is a time format, like "2:05:30.1" for 2 #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1128 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" msgstr "%d:%02d:%02d,%d" #. Translators: This is a time format, like "2:05:30.12" for 2 #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1135 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" msgstr "%d:%02d:%02d,%02d" #. Translators: This is a time format, like "05:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. #: ../src/pt-player.c:1152 #, c-format msgctxt "short time format" msgid "%02d:%02d" msgstr "%02d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1159 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" msgstr "%02d:%02d,%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1166 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" msgstr "%02d:%02d,%02d" #. Translators: This is a time format, like "5:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:348 #: ../src/pt-waveviewer.c:1077 #, c-format msgctxt "shortest time format" msgid "%d:%02d" msgstr "%d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1186 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" msgstr "%d:%02d,%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1193 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d,%02d" #: ../src/pt-player.c:1495 #, c-format msgid "Failed to load a plugin." msgstr "Ha fallado la carga de un complemento." #: ../src/pt-progress-dialog.c:148 msgid "Loading file..." msgstr "Cargando el archivo…" #: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 msgid "Failed to open temporary file." msgstr "Ha fallado la apertura de un archivo temporal." #: ../src/pt-waveloader.c:350 msgid "Failed to setup GStreamer pipeline." msgstr "Ha fallado la configuración de la tubería GStreamer." #: ../src/pt-waveloader.c:369 msgid "Failed to start GStreamer pipeline." msgstr "Ha fallado el inicio de la tubería GStreamer." #: ../src/pt-waveviewer.c:1443 msgid "Follow cursor" msgstr "Seguir cursor" #: ../src/pt-waveviewer.c:1444 msgid "Scroll automatically to the cursor's position" msgstr "Desplaza automáticamente a la posición del cursor" #: ../src/pt-waveviewer.c:1460 msgid "Fixed cursor" msgstr "Cursor fijo" #: ../src/pt-waveviewer.c:1461 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" "Si VERDADERO, el cursor está en una posición fija y la onda se mueve.\n" "Si FALSO, el cursor se mueve." #: ../src/pt-waveviewer.c:1475 msgid "Show ruler" msgstr "Muestra regla" #: ../src/pt-waveviewer.c:1476 msgid "Show the time scale with time marks" msgstr "Muestra la escala de tiempo con marcas" parlatype-1.5.4/libparlatype/po/Makevars0000644000175000017500000000653413176574164015273 00000000000000# Makefile variables for PO directory in any package using GNU gettext. # Usually the message domain is the same as the package name. DOMAIN = $(PACKAGE) # These two variables depend on the location of this directory. subdir = po top_builddir = .. # These options get passed to xgettext. XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ --keyword=C_:1c,2 # This is the copyright holder that gets inserted into the header of the # $(DOMAIN).pot file. Set this to the copyright holder of the surrounding # package. (Note that the msgstr strings, extracted from the package's # sources, belong to the copyright holder of the package.) Translators are # expected to transfer the copyright for their translations to this person # or entity, or to disclaim their copyright. The empty string stands for # the public domain; in this case the translators are expected to disclaim # their copyright. COPYRIGHT_HOLDER = Gabor Karsay # This tells whether or not to prepend "GNU " prefix to the package # name that gets inserted into the header of the $(DOMAIN).pot file. # Possible values are "yes", "no", or empty. If it is empty, try to # detect it automatically by scanning the files in $(top_srcdir) for # "GNU packagename" string. PACKAGE_GNU = # This is the email address or URL to which the translators shall report # bugs in the untranslated strings: # - Strings which are not entire sentences, see the maintainer guidelines # in the GNU gettext documentation, section 'Preparing Strings'. # - Strings which use unclear terms or require additional context to be # understood. # - Strings which make invalid assumptions about notation of date, time or # money. # - Pluralisation problems. # - Incorrect English spelling. # - Incorrect formatting. # It can be your email address, or a mailing list address where translators # can write to without being subscribed, or the URL of a web page through # which the translators can contact you. MSGID_BUGS_ADDRESS = https://github.com/gkarsay/parlatype/issues # This is the list of locale categories, beyond LC_MESSAGES, for which the # message catalogs shall be used. It is usually empty. EXTRA_LOCALE_CATEGORIES = # This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt' # context. Possible values are "yes" and "no". Set this to yes if the # package uses functions taking also a message context, like pgettext(), or # if in $(XGETTEXT_OPTIONS) you define keywords with a context argument. USE_MSGCTXT = no # These options get passed to msgmerge. # Useful options are in particular: # --previous to keep previous msgids of translated messages, # --quiet to reduce the verbosity. MSGMERGE_OPTIONS = # These options get passed to msginit. # If you want to disable line wrapping when writing PO files, add # --no-wrap to MSGMERGE_OPTIONS, XGETTEXT_OPTIONS, and # MSGINIT_OPTIONS. MSGINIT_OPTIONS = # This tells whether or not to regenerate a PO file when $(DOMAIN).pot # has changed. Possible values are "yes" and "no". Set this to no if # the POT file is checked in the repository and the version control # program ignores timestamps. PO_DEPENDS_ON_POT = yes # This tells whether or not to forcibly update $(DOMAIN).pot and # regenerate PO files on "make dist". Possible values are "yes" and # "no". Set this to no if the POT file and PO files are maintained # externally. DIST_DEPENDS_ON_UPDATE_PO = yes parlatype-1.5.4/libparlatype/po/ku.po0000644000175000017500000001250313176574165014550 00000000000000# Kurdish translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Rokar ✌ , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-03-26 14:25+0200\n" "PO-Revision-Date: 2017-02-15 09:03+0000\n" "Last-Translator: Rokar ✌ \n" "Language-Team: Kurdish \n" "Language: ku\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-03-13 15:08+0000\n" "X-Generator: Launchpad (build 18331)\n" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:436 #, c-format msgid "URI not valid: %s" msgstr "" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:448 #, c-format msgid "File not found: %s" msgstr "" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 #: ../src/pt-waveviewer.c:1024 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is a time format, like "2:05:30.1" for 2 #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1128 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" msgstr "%d:%02d:%02d.%d" #. Translators: This is a time format, like "2:05:30.12" for 2 #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1135 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" msgstr "%d:%02d:%02d.%02d" #. Translators: This is a time format, like "05:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. #: ../src/pt-player.c:1152 #, c-format msgctxt "short time format" msgid "%02d:%02d" msgstr "%02d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1159 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" msgstr "%02d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1166 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" msgstr "%02d:%02d.%02d" #. Translators: This is a time format, like "5:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 #: ../src/pt-waveviewer.c:1026 #, c-format msgctxt "shortest time format" msgid "%d:%02d" msgstr "%d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1186 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" msgstr "%d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1193 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" #: ../src/pt-player.c:1495 #, c-format msgid "Failed to load a plugin." msgstr "" #: ../src/pt-progress-dialog.c:148 msgid "Loading file..." msgstr "" #: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 msgid "Failed to open temporary file." msgstr "" #: ../src/pt-waveloader.c:350 msgid "Failed to setup GStreamer pipeline." msgstr "" #: ../src/pt-waveloader.c:369 msgid "Failed to start GStreamer pipeline." msgstr "" #: ../src/pt-waveviewer.c:1381 msgid "Follow cursor" msgstr "" #: ../src/pt-waveviewer.c:1382 msgid "Scroll automatically to the cursor's position" msgstr "" #: ../src/pt-waveviewer.c:1398 msgid "Fixed cursor" msgstr "" #: ../src/pt-waveviewer.c:1399 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" #: ../src/pt-waveviewer.c:1413 msgid "Show ruler" msgstr "" #: ../src/pt-waveviewer.c:1414 msgid "Show the time scale with time marks" msgstr "" #~ msgctxt "long time format, 1 digit" #~ msgid "%d:%02d:%02d.%01d" #~ msgstr "%d:%02d:%02d.%01d" #~ msgctxt "shortest time format, 1 digit" #~ msgid "%d:%02d.%01d" #~ msgstr "%d:%02d.%01d" parlatype-1.5.4/libparlatype/po/nl.po0000644000175000017500000001321313176574165014541 00000000000000# Dutch translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Heimen Stoffels , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-04-18 20:55+0200\n" "PO-Revision-Date: 2017-06-26 09:37+0000\n" "Last-Translator: Heimen Stoffels \n" "Language-Team: Dutch \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-06-29 09:44+0000\n" "X-Generator: Launchpad (build 18418)\n" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:436 #, c-format msgid "URI not valid: %s" msgstr "URI is ongeldig: %s" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:448 #, c-format msgid "File not found: %s" msgstr "Bestand niet gevonden: %s" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:343 #: ../src/pt-waveviewer.c:1075 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is a time format, like "2:05:30.1" for 2 #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1128 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" msgstr "%d:%02d:%02d.%d" #. Translators: This is a time format, like "2:05:30.12" for 2 #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1135 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" msgstr "%d:%02d:%02d.%02d" #. Translators: This is a time format, like "05:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. #: ../src/pt-player.c:1152 #, c-format msgctxt "short time format" msgid "%02d:%02d" msgstr "%02d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1159 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" msgstr "%02d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1166 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" msgstr "%02d:%02d.%02d" #. Translators: This is a time format, like "5:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:348 #: ../src/pt-waveviewer.c:1077 #, c-format msgctxt "shortest time format" msgid "%d:%02d" msgstr "%d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1186 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" msgstr "%d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1193 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" #: ../src/pt-player.c:1495 #, c-format msgid "Failed to load a plugin." msgstr "Laden van een plug-in is mislukt." #: ../src/pt-progress-dialog.c:148 msgid "Loading file..." msgstr "Bezig met laden van bestand..." #: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 msgid "Failed to open temporary file." msgstr "Tijdelijk bestand openen is mislukt." #: ../src/pt-waveloader.c:350 msgid "Failed to setup GStreamer pipeline." msgstr "GStreamer-pipeline instellen is mislukt." #: ../src/pt-waveloader.c:369 msgid "Failed to start GStreamer pipeline." msgstr "GStreamer-pipeline starten is mislukt." #: ../src/pt-waveviewer.c:1443 msgid "Follow cursor" msgstr "Cursor volgen" #: ../src/pt-waveviewer.c:1444 msgid "Scroll automatically to the cursor's position" msgstr "Automatisch scrollen naar de cursorpositie" #: ../src/pt-waveviewer.c:1460 msgid "Fixed cursor" msgstr "Vastgezette cursor" #: ../src/pt-waveviewer.c:1461 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" "Als dit wordt ingesteld op TRUE, dan is de cursor vastgezet en beweegt de " "golfvorm.\n" "Als dit wordt ingesteld op FALSE, dan beweegt de cursor." #: ../src/pt-waveviewer.c:1475 msgid "Show ruler" msgstr "Liniaal weergeven" #: ../src/pt-waveviewer.c:1476 msgid "Show the time scale with time marks" msgstr "Tijdschaal weergeven met tijdmarkeringen" parlatype-1.5.4/libparlatype/po/LINGUAS0000644000175000017500000000006413176574164014614 00000000000000ca de en_GB es fr he id it ja kab ku lt lv ms nl pt parlatype-1.5.4/libparlatype/po/ja.po0000644000175000017500000001356413176574165014533 00000000000000# Japanese translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Shinichirou Yamada , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-04-18 20:55+0200\n" "PO-Revision-Date: 2017-07-25 15:54+0000\n" "Last-Translator: Shinichirou Yamada " "\n" "Language-Team: Japanese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-07-30 07:24+0000\n" "X-Generator: Launchpad (build 18441)\n" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:436 #, c-format msgid "URI not valid: %s" msgstr "URI が無効です: %s" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:448 #, c-format msgid "File not found: %s" msgstr "ファイルが見つかりません: %s" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:343 #: ../src/pt-waveviewer.c:1075 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is a time format, like "2:05:30.1" for 2 #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1128 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" msgstr "%d:%02d:%02d.%d" #. Translators: This is a time format, like "2:05:30.12" for 2 #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1135 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" msgstr "%d:%02d:%02d.%02d" #. Translators: This is a time format, like "05:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. #: ../src/pt-player.c:1152 #, c-format msgctxt "short time format" msgid "%02d:%02d" msgstr "%02d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1159 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" msgstr "%02d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1166 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" msgstr "%02d:%02d.%02d" #. Translators: This is a time format, like "5:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:348 #: ../src/pt-waveviewer.c:1077 #, c-format msgctxt "shortest time format" msgid "%d:%02d" msgstr "%d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1186 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" msgstr "%d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1193 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" #: ../src/pt-player.c:1495 #, c-format msgid "Failed to load a plugin." msgstr "プラグインを読み込めませんでした。" #: ../src/pt-progress-dialog.c:148 msgid "Loading file..." msgstr "ファイルを読み込み中..." #: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 msgid "Failed to open temporary file." msgstr "一時ファイルを開けませんでした。" #: ../src/pt-waveloader.c:350 msgid "Failed to setup GStreamer pipeline." msgstr "GStreamer パイプラインのセットアップに失敗しました。" #: ../src/pt-waveloader.c:369 msgid "Failed to start GStreamer pipeline." msgstr "GStreamer パイプラインのスタートに失敗しました。" #: ../src/pt-waveviewer.c:1443 msgid "Follow cursor" msgstr "カーソルに追従する" #: ../src/pt-waveviewer.c:1444 msgid "Scroll automatically to the cursor's position" msgstr "カーソルの位置へ自動的にスクロールする" #: ../src/pt-waveviewer.c:1460 msgid "Fixed cursor" msgstr "カーソルを固定する" #: ../src/pt-waveviewer.c:1461 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" "TRUE の場合、カーソルの位置は固定され、波形が動きます。\n" "FALSE の場合、カーソルが動きます。" #: ../src/pt-waveviewer.c:1475 msgid "Show ruler" msgstr "ルーラーを表示する" #: ../src/pt-waveviewer.c:1476 msgid "Show the time scale with time marks" msgstr "タイムマークの付いたタイムスケールを表示する" parlatype-1.5.4/libparlatype/po/pt.po0000644000175000017500000001265513176574165014564 00000000000000# Portuguese translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Vitor Loureiro , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-03-26 14:25+0200\n" "PO-Revision-Date: 2017-01-17 11:57+0000\n" "Last-Translator: Vitor Loureiro \n" "Language-Team: Portuguese \n" "Language: pt\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-01-26 11:32+0000\n" "X-Generator: Launchpad (build 18315)\n" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:436 #, c-format msgid "URI not valid: %s" msgstr "" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:448 #, c-format msgid "File not found: %s" msgstr "Ficheiro não encontrado: %s" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 #: ../src/pt-waveviewer.c:1024 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is a time format, like "2:05:30.1" for 2 #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1128 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" msgstr "%d:%02d:%02d.%d" #. Translators: This is a time format, like "2:05:30.12" for 2 #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1135 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" msgstr "%d:%02d:%02d.%02d" #. Translators: This is a time format, like "05:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. #: ../src/pt-player.c:1152 #, c-format msgctxt "short time format" msgid "%02d:%02d" msgstr "%02d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1159 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" msgstr "%02d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1166 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" msgstr "%02d:%02d.%02d" #. Translators: This is a time format, like "5:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 #: ../src/pt-waveviewer.c:1026 #, c-format msgctxt "shortest time format" msgid "%d:%02d" msgstr "%d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1186 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" msgstr "%d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1193 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" #: ../src/pt-player.c:1495 #, c-format msgid "Failed to load a plugin." msgstr "" #: ../src/pt-progress-dialog.c:148 msgid "Loading file..." msgstr "" #: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 msgid "Failed to open temporary file." msgstr "" #: ../src/pt-waveloader.c:350 msgid "Failed to setup GStreamer pipeline." msgstr "" #: ../src/pt-waveloader.c:369 msgid "Failed to start GStreamer pipeline." msgstr "" #: ../src/pt-waveviewer.c:1381 msgid "Follow cursor" msgstr "" #: ../src/pt-waveviewer.c:1382 msgid "Scroll automatically to the cursor's position" msgstr "" #: ../src/pt-waveviewer.c:1398 msgid "Fixed cursor" msgstr "" #: ../src/pt-waveviewer.c:1399 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" #: ../src/pt-waveviewer.c:1413 msgid "Show ruler" msgstr "" #: ../src/pt-waveviewer.c:1414 msgid "Show the time scale with time marks" msgstr "" #~ msgctxt "long time format, 1 digit" #~ msgid "%d:%02d:%02d.%01d" #~ msgstr "%d:%02d:%02d.%01d" #~ msgctxt "shortest time format, 1 digit" #~ msgid "%d:%02d.%01d" #~ msgstr "%d:%02d.%01d" #~ msgid "Cursor position" #~ msgstr "Posição do ponteiro" parlatype-1.5.4/libparlatype/po/POTFILES.skip0000644000175000017500000000000013171727132015660 00000000000000parlatype-1.5.4/libparlatype/po/id.po0000644000175000017500000001362013176574165014526 00000000000000# Indonesian translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Ari Setyo Wibowo , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-03-26 14:25+0200\n" "PO-Revision-Date: 2017-01-18 08:13+0000\n" "Last-Translator: Ari Setyo Wibowo \n" "Language-Team: Indonesian \n" "Language: id\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-01-20 20:44+0000\n" "X-Generator: Launchpad (build 18302)\n" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:436 #, c-format msgid "URI not valid: %s" msgstr "URI tidak benar: %s" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:448 #, c-format msgid "File not found: %s" msgstr "Berkas tidak ditemukan: %s" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 #: ../src/pt-waveviewer.c:1024 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is a time format, like "2:05:30.1" for 2 #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1128 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" msgstr "%d:%02d:%02d.%d" #. Translators: This is a time format, like "2:05:30.12" for 2 #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1135 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" msgstr "%d:%02d:%02d.%02d" #. Translators: This is a time format, like "05:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. #: ../src/pt-player.c:1152 #, c-format msgctxt "short time format" msgid "%02d:%02d" msgstr "%02d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1159 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" msgstr "%02d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1166 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" msgstr "%02d:%02d.%02d" #. Translators: This is a time format, like "5:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 #: ../src/pt-waveviewer.c:1026 #, c-format msgctxt "shortest time format" msgid "%d:%02d" msgstr "%d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1186 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" msgstr "%d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1193 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" #: ../src/pt-player.c:1495 #, c-format msgid "Failed to load a plugin." msgstr "Gagal memuat plugin." #: ../src/pt-progress-dialog.c:148 msgid "Loading file..." msgstr "Memuat file..." #: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 msgid "Failed to open temporary file." msgstr "Gagal membuka file temporer." #: ../src/pt-waveloader.c:350 msgid "Failed to setup GStreamer pipeline." msgstr "Gagal menyiapkan GStreamer pipeline." #: ../src/pt-waveloader.c:369 msgid "Failed to start GStreamer pipeline." msgstr "Gagal memulai GStreamer pipeline." #: ../src/pt-waveviewer.c:1381 msgid "Follow cursor" msgstr "Ikuti kursor" #: ../src/pt-waveviewer.c:1382 msgid "Scroll automatically to the cursor's position" msgstr "Scroll otomatis ke posisi kursor" #: ../src/pt-waveviewer.c:1398 msgid "Fixed cursor" msgstr "Kursor tetap" #: ../src/pt-waveviewer.c:1399 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" "Jika BENAR, kursor dalam posisi tetap dan bentuk gelombang bergerak.\n" "Jika SALAH, kursor bergerak." #: ../src/pt-waveviewer.c:1413 msgid "Show ruler" msgstr "Tunjukkan penggaris" #: ../src/pt-waveviewer.c:1414 msgid "Show the time scale with time marks" msgstr "Tunjukkan skala waktu dengan tanda waktu" #~ msgctxt "long time format, 1 digit" #~ msgid "%d:%02d:%02d.%01d" #~ msgstr "%d:%02d:%02d.%01d" #~ msgctxt "shortest time format, 1 digit" #~ msgid "%d:%02d.%01d" #~ msgstr "%d:%02d.%01d" #~ msgid "Cursor position" #~ msgstr "Posisi kursor" #~ msgid "Cursor's position in 1/1000 seconds" #~ msgstr "Posisi kursor di 1/1000 detik" parlatype-1.5.4/libparlatype/po/ms.po0000644000175000017500000001274113176574165014554 00000000000000# Malay translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # abuyop , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-03-26 14:25+0200\n" "PO-Revision-Date: 2017-02-01 03:48+0000\n" "Last-Translator: abuyop \n" "Language-Team: Malay \n" "Language: ms\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-03-13 15:08+0000\n" "X-Generator: Launchpad (build 18331)\n" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:436 #, c-format msgid "URI not valid: %s" msgstr "" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:448 #, c-format msgid "File not found: %s" msgstr "Fail tidak ditemui: %s" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:318 #: ../src/pt-waveviewer.c:1024 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is a time format, like "2:05:30.1" for 2 #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1128 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" msgstr "%d:%02d:%02d.%d" #. Translators: This is a time format, like "2:05:30.12" for 2 #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1135 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" msgstr "%d:%02d:%02d.%02d" #. Translators: This is a time format, like "05:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. #: ../src/pt-player.c:1152 #, c-format msgctxt "short time format" msgid "%02d:%02d" msgstr "%02d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1159 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" msgstr "%02d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1166 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" msgstr "%02d:%02d.%02d" #. Translators: This is a time format, like "5:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:323 #: ../src/pt-waveviewer.c:1026 #, c-format msgctxt "shortest time format" msgid "%d:%02d" msgstr "%d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1186 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" msgstr "%d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1193 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" #: ../src/pt-player.c:1495 #, c-format msgid "Failed to load a plugin." msgstr "" #: ../src/pt-progress-dialog.c:148 msgid "Loading file..." msgstr "Memuatkan fail" #: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 msgid "Failed to open temporary file." msgstr "Gagal membuka fail sementarasementara." #: ../src/pt-waveloader.c:350 msgid "Failed to setup GStreamer pipeline." msgstr "Gagal memasang talian paip GStreamer." #: ../src/pt-waveloader.c:369 msgid "Failed to start GStreamer pipeline." msgstr "" #: ../src/pt-waveviewer.c:1381 msgid "Follow cursor" msgstr "" #: ../src/pt-waveviewer.c:1382 msgid "Scroll automatically to the cursor's position" msgstr "" #: ../src/pt-waveviewer.c:1398 msgid "Fixed cursor" msgstr "" #: ../src/pt-waveviewer.c:1399 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" #: ../src/pt-waveviewer.c:1413 msgid "Show ruler" msgstr "" #: ../src/pt-waveviewer.c:1414 msgid "Show the time scale with time marks" msgstr "" #~ msgctxt "long time format, 1 digit" #~ msgid "%d:%02d:%02d.%01d" #~ msgstr "%d:%02d:%02d.%01d" #~ msgctxt "shortest time format, 1 digit" #~ msgid "%d:%02d.%01d" #~ msgstr "%d:%02d.%01d" #~ msgid "Cursor position" #~ msgstr "Kedudukan kursor" parlatype-1.5.4/libparlatype/po/POTFILES.in0000644000175000017500000000025013200427162015320 00000000000000# List of source files which contain translatable strings. src/pt-player.c src/pt-progress-dialog.c src/pt-waveloader.c src/pt-waveviewer.c src/pt-waveviewer-ruler.c parlatype-1.5.4/libparlatype/po/lt.po0000644000175000017500000001312613176574165014552 00000000000000# Lithuanian translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Moo , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-04-18 20:55+0200\n" "PO-Revision-Date: 2017-07-04 09:18+0000\n" "Last-Translator: Moo \n" "Language-Team: Lithuanian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2017-07-06 17:52+0000\n" "X-Generator: Launchpad (build 18419)\n" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:436 #, c-format msgid "URI not valid: %s" msgstr "Neteisingas URI: %s" #. Translators: %s is a detailed error message. #: ../src/pt-player.c:448 #, c-format msgid "File not found: %s" msgstr "Failas nerastas: %s" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1121 ../src/pt-waveviewer.c:343 #: ../src/pt-waveviewer.c:1075 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is a time format, like "2:05:30.1" for 2 #. hours, 5 minutes, 30 seconds, and 1 tenthsecond. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1128 #, c-format msgctxt "long time format, 1 digit" msgid "%d:%02d:%02d.%d" msgstr "%d:%02d:%02d.%d" #. Translators: This is a time format, like "2:05:30.12" for 2 #. hours, 5 minutes, 30 seconds, and 12 hundrethseconds. You may #. change ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1135 #, c-format msgctxt "long time format, 2 digits" msgid "%d:%02d:%02d.%02d" msgstr "%d:%02d:%02d.%02d" #. Translators: This is a time format, like "05:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%I02d" instead #. of "%02d" if your locale uses localized digits. #: ../src/pt-player.c:1152 #, c-format msgctxt "short time format" msgid "%02d:%02d" msgstr "%02d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1159 #, c-format msgctxt "short time format, 1 digit" msgid "%02d:%02d.%d" msgstr "%02d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1166 #, c-format msgctxt "short time format, 2 digits" msgid "%02d:%02d.%02d" msgstr "%02d:%02d.%02d" #. Translators: This is a time format, like "5:30" for #. 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1179 ../src/pt-waveviewer.c:348 #: ../src/pt-waveviewer.c:1077 #, c-format msgctxt "shortest time format" msgid "%d:%02d" msgstr "%d:%02d" #. Translators: This is a time format, like "05:30.1" for #. 5 minutes, 30 seconds, and 1 tenthsecond. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1186 #, c-format msgctxt "shortest time format, 1 digit" msgid "%d:%02d.%d" msgstr "%d:%02d.%d" #. Translators: This is a time format, like "05:30.12" for #. 5 minutes, 30 seconds, and 12 hundrethseconds. You may change #. ":" or "." to the separator that your locale uses or #. use "%Id" instead of "%d" if your locale uses localized digits. #: ../src/pt-player.c:1193 #, c-format msgctxt "shortest time format, 2 digits" msgid "%d:%02d.%02d" msgstr "%d:%02d.%02d" #: ../src/pt-player.c:1495 #, c-format msgid "Failed to load a plugin." msgstr "Nepavyko įkelti įskiepio." #: ../src/pt-progress-dialog.c:148 msgid "Loading file..." msgstr "Įkeliamas failas..." #: ../src/pt-waveloader.c:337 ../src/pt-waveloader.c:423 msgid "Failed to open temporary file." msgstr "Nepavyko atverti laikinojo failo." #: ../src/pt-waveloader.c:350 msgid "Failed to setup GStreamer pipeline." msgstr "Nepavyko nustatyti GStreamer komandų grandinės." #: ../src/pt-waveloader.c:369 msgid "Failed to start GStreamer pipeline." msgstr "Nepavyko paleisti GStreamer komandų grandinės." #: ../src/pt-waveviewer.c:1443 msgid "Follow cursor" msgstr "Sekti paskui žymeklį" #: ../src/pt-waveviewer.c:1444 msgid "Scroll automatically to the cursor's position" msgstr "Automatiškai slinkti į žymeklio poziciją" #: ../src/pt-waveviewer.c:1460 msgid "Fixed cursor" msgstr "Fiksuotas žymeklis" #: ../src/pt-waveviewer.c:1461 msgid "" "If TRUE, the cursor is in a fixed position and the waveform is moving.\n" "If FALSE, the cursor is moving." msgstr "" "Jei TEISINGA, bangos formai judant, žymeklis liks fiksuotoje pozicijoje.\n" "Jei NETEISINGA, žymeklis judės." #: ../src/pt-waveviewer.c:1475 msgid "Show ruler" msgstr "Rodyti liniuotę" #: ../src/pt-waveviewer.c:1476 msgid "Show the time scale with time marks" msgstr "Rodyti laiko mastelį su laiko žymėmis" parlatype-1.5.4/libparlatype/test-driver0000755000175000017500000001027713167645076015357 00000000000000#! /bin/sh # test-driver - basic testsuite driver script. scriptversion=2013-07-13.22; # UTC # Copyright (C) 2011-2013 Free Software Foundation, Inc. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # This file is maintained in Automake, please report # bugs to or send patches to # . # Make unconditional expansion of undefined variables an error. This # helps a lot in preventing typo-related bugs. set -u usage_error () { echo "$0: $*" >&2 print_usage >&2 exit 2 } print_usage () { cat <$log_file 2>&1 estatus=$? if test $enable_hard_errors = no && test $estatus -eq 99; then estatus=1 fi case $estatus:$expect_failure in 0:yes) col=$red res=XPASS recheck=yes gcopy=yes;; 0:*) col=$grn res=PASS recheck=no gcopy=no;; 77:*) col=$blu res=SKIP recheck=no gcopy=yes;; 99:*) col=$mgn res=ERROR recheck=yes gcopy=yes;; *:yes) col=$lgn res=XFAIL recheck=no gcopy=yes;; *:*) col=$red res=FAIL recheck=yes gcopy=yes;; esac # Report outcome to console. echo "${col}${res}${std}: $test_name" # Register the test result, and other relevant metadata. echo ":test-result: $res" > $trs_file echo ":global-test-result: $res" >> $trs_file echo ":recheck: $recheck" >> $trs_file echo ":copy-in-global-log: $gcopy" >> $trs_file # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: parlatype-1.5.4/libparlatype/config.h.in0000644000175000017500000000334213204324043015153 00000000000000/* config.h.in. Generated from configure.ac by autoheader. */ /* Define to 1 if you have the `atexit' function. */ #undef HAVE_ATEXIT /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define to the sub-directory in which libtool stores uninstalled libraries. */ #undef LT_OBJDIR /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the home page for this package. */ #undef PACKAGE_URL /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Version number of package */ #undef VERSION /* Define to `int' if does not define. */ #undef ssize_t parlatype-1.5.4/libparlatype/m4/0000755000175000017500000000000013204324043013526 500000000000000parlatype-1.5.4/libparlatype/m4/intltool.m40000644000175000017500000002772413167645026015607 00000000000000## intltool.m4 - Configure intltool for the target system. -*-Shell-script-*- ## Copyright (C) 2001 Eazel, Inc. ## Author: Maciej Stachowiak ## Kenneth Christiansen ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ## ## This program is distributed in the hope that it will be useful, but ## WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ## General Public License for more details. ## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ## ## As a special exception to the GNU General Public License, if you ## distribute this file as part of a program that contains a ## configuration script generated by Autoconf, you may include it under ## the same distribution terms that you use for the rest of that program. dnl IT_PROG_INTLTOOL([MINIMUM-VERSION], [no-xml]) # serial 42 IT_PROG_INTLTOOL AC_DEFUN([IT_PROG_INTLTOOL], [ AC_PREREQ([2.50])dnl AC_REQUIRE([AM_NLS])dnl case "$am__api_version" in 1.[01234]) AC_MSG_ERROR([Automake 1.5 or newer is required to use intltool]) ;; *) ;; esac INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` if test -n "$1"; then AC_MSG_CHECKING([for intltool >= $1]) AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found]) test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || AC_MSG_ERROR([Your intltool is too old. You need intltool $1 or later.]) fi AC_PATH_PROG(INTLTOOL_UPDATE, [intltool-update]) AC_PATH_PROG(INTLTOOL_MERGE, [intltool-merge]) AC_PATH_PROG(INTLTOOL_EXTRACT, [intltool-extract]) if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then AC_MSG_ERROR([The intltool scripts were not found. Please install intltool.]) fi if test -z "$AM_DEFAULT_VERBOSITY"; then AM_DEFAULT_VERBOSITY=1 fi AC_SUBST([AM_DEFAULT_VERBOSITY]) INTLTOOL_V_MERGE='$(INTLTOOL__v_MERGE_$(V))' INTLTOOL__v_MERGE_='$(INTLTOOL__v_MERGE_$(AM_DEFAULT_VERBOSITY))' INTLTOOL__v_MERGE_0='@echo " ITMRG " [$]@;' AC_SUBST(INTLTOOL_V_MERGE) AC_SUBST(INTLTOOL__v_MERGE_) AC_SUBST(INTLTOOL__v_MERGE_0) INTLTOOL_V_MERGE_OPTIONS='$(intltool__v_merge_options_$(V))' intltool__v_merge_options_='$(intltool__v_merge_options_$(AM_DEFAULT_VERBOSITY))' intltool__v_merge_options_0='-q' AC_SUBST(INTLTOOL_V_MERGE_OPTIONS) AC_SUBST(intltool__v_merge_options_) AC_SUBST(intltool__v_merge_options_0) INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -p $(top_srcdir)/po $< [$]@' INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge 5000; then INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u --no-translations $< [$]@' else INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)_it_tmp_dir=tmp.intltool.[$][$]RANDOM && mkdir [$][$]_it_tmp_dir && LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u [$][$]_it_tmp_dir $< [$]@ && rmdir [$][$]_it_tmp_dir' fi INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' _IT_SUBST(INTLTOOL_DESKTOP_RULE) _IT_SUBST(INTLTOOL_DIRECTORY_RULE) _IT_SUBST(INTLTOOL_KEYS_RULE) _IT_SUBST(INTLTOOL_PROP_RULE) _IT_SUBST(INTLTOOL_OAF_RULE) _IT_SUBST(INTLTOOL_PONG_RULE) _IT_SUBST(INTLTOOL_SERVER_RULE) _IT_SUBST(INTLTOOL_SHEET_RULE) _IT_SUBST(INTLTOOL_SOUNDLIST_RULE) _IT_SUBST(INTLTOOL_UI_RULE) _IT_SUBST(INTLTOOL_XAM_RULE) _IT_SUBST(INTLTOOL_KBD_RULE) _IT_SUBST(INTLTOOL_XML_RULE) _IT_SUBST(INTLTOOL_XML_NOMERGE_RULE) _IT_SUBST(INTLTOOL_CAVES_RULE) _IT_SUBST(INTLTOOL_SCHEMAS_RULE) _IT_SUBST(INTLTOOL_THEME_RULE) _IT_SUBST(INTLTOOL_SERVICE_RULE) _IT_SUBST(INTLTOOL_POLICY_RULE) # Check the gettext tools to make sure they are GNU AC_PATH_PROG(XGETTEXT, xgettext) AC_PATH_PROG(MSGMERGE, msgmerge) AC_PATH_PROG(MSGFMT, msgfmt) AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) fi xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) fi AC_PATH_PROG(INTLTOOL_PERL, perl) if test -z "$INTLTOOL_PERL"; then AC_MSG_ERROR([perl not found]) fi AC_MSG_CHECKING([for perl >= 5.8.1]) $INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 if test $? -ne 0; then AC_MSG_ERROR([perl 5.8.1 is required for intltool]) else IT_PERL_VERSION=`$INTLTOOL_PERL -e "printf '%vd', $^V"` AC_MSG_RESULT([$IT_PERL_VERSION]) fi if test "x$2" != "xno-xml"; then AC_MSG_CHECKING([for XML::Parser]) if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then AC_MSG_RESULT([ok]) else AC_MSG_ERROR([XML::Parser perl module is required for intltool]) fi fi # Substitute ALL_LINGUAS so we can use it in po/Makefile AC_SUBST(ALL_LINGUAS) # Set DATADIRNAME correctly if it is not set yet # (copied from glib-gettext.m4) if test -z "$DATADIRNAME"; then AC_LINK_IFELSE( [AC_LANG_PROGRAM([[]], [[extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr]])], [DATADIRNAME=share], [case $host in *-*-solaris*) dnl On Solaris, if bind_textdomain_codeset is in libc, dnl GNU format message catalog is always supported, dnl since both are added to the libc all together. dnl Hence, we'd like to go with DATADIRNAME=share dnl in this case. AC_CHECK_FUNC(bind_textdomain_codeset, [DATADIRNAME=share], [DATADIRNAME=lib]) ;; *) [DATADIRNAME=lib] ;; esac]) fi AC_SUBST(DATADIRNAME) IT_PO_SUBDIR([po]) ]) # IT_PO_SUBDIR(DIRNAME) # --------------------- # All po subdirs have to be declared with this macro; the subdir "po" is # declared by IT_PROG_INTLTOOL. # AC_DEFUN([IT_PO_SUBDIR], [AC_PREREQ([2.53])dnl We use ac_top_srcdir inside AC_CONFIG_COMMANDS. dnl dnl The following CONFIG_COMMANDS should be executed at the very end dnl of config.status. AC_CONFIG_COMMANDS_PRE([ AC_CONFIG_COMMANDS([$1/stamp-it], [ if [ ! grep "^# INTLTOOL_MAKEFILE$" "$1/Makefile.in" > /dev/null ]; then AC_MSG_ERROR([$1/Makefile.in.in was not created by intltoolize.]) fi rm -f "$1/stamp-it" "$1/stamp-it.tmp" "$1/POTFILES" "$1/Makefile.tmp" >"$1/stamp-it.tmp" [sed '/^#/d s/^[[].*] *// /^[ ]*$/d '"s|^| $ac_top_srcdir/|" \ "$srcdir/$1/POTFILES.in" | sed '$!s/$/ \\/' >"$1/POTFILES" ] [sed '/^POTFILES =/,/[^\\]$/ { /^POTFILES =/!d r $1/POTFILES } ' "$1/Makefile.in" >"$1/Makefile"] rm -f "$1/Makefile.tmp" mv "$1/stamp-it.tmp" "$1/stamp-it" ]) ])dnl ]) # _IT_SUBST(VARIABLE) # ------------------- # Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST # AC_DEFUN([_IT_SUBST], [ AC_SUBST([$1]) m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])]) ] ) # deprecated macros AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL]) # A hint is needed for aclocal from Automake <= 1.9.4: # AC_DEFUN([AC_PROG_INTLTOOL], ...) parlatype-1.5.4/libparlatype/m4/ltoptions.m40000644000175000017500000003007313167645057015771 00000000000000# Helper functions for option handling. -*- Autoconf -*- # # Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, # Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 7 ltoptions.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) # _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) # ------------------------------------------ m4_define([_LT_MANGLE_OPTION], [[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) # _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) # --------------------------------------- # Set option OPTION-NAME for macro MACRO-NAME, and if there is a # matching handler defined, dispatch to it. Other OPTION-NAMEs are # saved as a flag. m4_define([_LT_SET_OPTION], [m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), _LT_MANGLE_DEFUN([$1], [$2]), [m4_warning([Unknown $1 option `$2'])])[]dnl ]) # _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) # ------------------------------------------------------------ # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. m4_define([_LT_IF_OPTION], [m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) # _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) # ------------------------------------------------------- # Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME # are set. m4_define([_LT_UNLESS_OPTIONS], [m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), [m4_define([$0_found])])])[]dnl m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 ])[]dnl ]) # _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) # ---------------------------------------- # OPTION-LIST is a space-separated list of Libtool options associated # with MACRO-NAME. If any OPTION has a matching handler declared with # LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about # the unknown option and exit. m4_defun([_LT_SET_OPTIONS], [# Set options m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [_LT_SET_OPTION([$1], _LT_Option)]) m4_if([$1],[LT_INIT],[ dnl dnl Simply set some default values (i.e off) if boolean options were not dnl specified: _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no ]) _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no ]) dnl dnl If no reference was made to various pairs of opposing options, then dnl we run the default mode handler for the pair. For example, if neither dnl `shared' nor `disable-shared' was passed, we enable building of shared dnl archives by default: _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], [_LT_ENABLE_FAST_INSTALL]) ]) ])# _LT_SET_OPTIONS ## --------------------------------- ## ## Macros to handle LT_INIT options. ## ## --------------------------------- ## # _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) # ----------------------------------------- m4_define([_LT_MANGLE_DEFUN], [[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) # LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) # ----------------------------------------------- m4_define([LT_OPTION_DEFINE], [m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl ])# LT_OPTION_DEFINE # dlopen # ------ LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes ]) AU_DEFUN([AC_LIBTOOL_DLOPEN], [_LT_SET_OPTION([LT_INIT], [dlopen]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `dlopen' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) # win32-dll # --------- # Declare package support for building win32 dll's. LT_OPTION_DEFINE([LT_INIT], [win32-dll], [enable_win32_dll=yes case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) ;; esac test -z "$AS" && AS=as _LT_DECL([], [AS], [1], [Assembler program])dnl test -z "$DLLTOOL" && DLLTOOL=dlltool _LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl ])# win32-dll AU_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_REQUIRE([AC_CANONICAL_HOST])dnl _LT_SET_OPTION([LT_INIT], [win32-dll]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `win32-dll' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) # _LT_ENABLE_SHARED([DEFAULT]) # ---------------------------- # implement the --enable-shared flag, and supports the `shared' and # `disable-shared' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_SHARED], [m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([shared], [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) _LT_DECL([build_libtool_libs], [enable_shared], [0], [Whether or not to build shared libraries]) ])# _LT_ENABLE_SHARED LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) # Old names: AC_DEFUN([AC_ENABLE_SHARED], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) ]) AC_DEFUN([AC_DISABLE_SHARED], [_LT_SET_OPTION([LT_INIT], [disable-shared]) ]) AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_SHARED], []) dnl AC_DEFUN([AM_DISABLE_SHARED], []) # _LT_ENABLE_STATIC([DEFAULT]) # ---------------------------- # implement the --enable-static flag, and support the `static' and # `disable-static' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_STATIC], [m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([static], [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_static=]_LT_ENABLE_STATIC_DEFAULT) _LT_DECL([build_old_libs], [enable_static], [0], [Whether or not to build static libraries]) ])# _LT_ENABLE_STATIC LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) # Old names: AC_DEFUN([AC_ENABLE_STATIC], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) ]) AC_DEFUN([AC_DISABLE_STATIC], [_LT_SET_OPTION([LT_INIT], [disable-static]) ]) AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_STATIC], []) dnl AC_DEFUN([AM_DISABLE_STATIC], []) # _LT_ENABLE_FAST_INSTALL([DEFAULT]) # ---------------------------------- # implement the --enable-fast-install flag, and support the `fast-install' # and `disable-fast-install' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_FAST_INSTALL], [m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([fast-install], [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) _LT_DECL([fast_install], [enable_fast_install], [0], [Whether or not to optimize for fast installation])dnl ])# _LT_ENABLE_FAST_INSTALL LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) # Old names: AU_DEFUN([AC_ENABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `fast-install' option into LT_INIT's first parameter.]) ]) AU_DEFUN([AC_DISABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], [disable-fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `disable-fast-install' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) # _LT_WITH_PIC([MODE]) # -------------------- # implement the --with-pic flag, and support the `pic-only' and `no-pic' # LT_INIT options. # MODE is either `yes' or `no'. If omitted, it defaults to `both'. m4_define([_LT_WITH_PIC], [AC_ARG_WITH([pic], [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], [lt_p=${PACKAGE-default} case $withval in yes|no) pic_mode=$withval ;; *) pic_mode=default # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for lt_pkg in $withval; do IFS="$lt_save_ifs" if test "X$lt_pkg" = "X$lt_p"; then pic_mode=yes fi done IFS="$lt_save_ifs" ;; esac], [pic_mode=default]) test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) _LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl ])# _LT_WITH_PIC LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) # Old name: AU_DEFUN([AC_LIBTOOL_PICMODE], [_LT_SET_OPTION([LT_INIT], [pic-only]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `pic-only' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) ## ----------------- ## ## LTDL_INIT Options ## ## ----------------- ## m4_define([_LTDL_MODE], []) LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], [m4_define([_LTDL_MODE], [nonrecursive])]) LT_OPTION_DEFINE([LTDL_INIT], [recursive], [m4_define([_LTDL_MODE], [recursive])]) LT_OPTION_DEFINE([LTDL_INIT], [subproject], [m4_define([_LTDL_MODE], [subproject])]) m4_define([_LTDL_TYPE], []) LT_OPTION_DEFINE([LTDL_INIT], [installable], [m4_define([_LTDL_TYPE], [installable])]) LT_OPTION_DEFINE([LTDL_INIT], [convenience], [m4_define([_LTDL_TYPE], [convenience])]) parlatype-1.5.4/libparlatype/m4/ltversion.m40000644000175000017500000000126213167645057015761 00000000000000# ltversion.m4 -- version numbers -*- Autoconf -*- # # Copyright (C) 2004 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # @configure_input@ # serial 3337 ltversion.m4 # This file is part of GNU Libtool m4_define([LT_PACKAGE_VERSION], [2.4.2]) m4_define([LT_PACKAGE_REVISION], [1.3337]) AC_DEFUN([LTVERSION_VERSION], [macro_version='2.4.2' macro_revision='1.3337' _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) _LT_DECL(, macro_revision, 0) ]) parlatype-1.5.4/libparlatype/m4/ax_valgrind_check.m40000644000175000017500000002134013176574164017366 00000000000000# =========================================================================== # https://www.gnu.org/software/autoconf-archive/ax_valgrind_check.html # =========================================================================== # # SYNOPSIS # # AX_VALGRIND_DFLT(memcheck|helgrind|drd|sgcheck, on|off) # AX_VALGRIND_CHECK() # # DESCRIPTION # # AX_VALGRIND_CHECK checks whether Valgrind is present and, if so, allows # running `make check` under a variety of Valgrind tools to check for # memory and threading errors. # # Defines VALGRIND_CHECK_RULES which should be substituted in your # Makefile; and $enable_valgrind which can be used in subsequent configure # output. VALGRIND_ENABLED is defined and substituted, and corresponds to # the value of the --enable-valgrind option, which defaults to being # enabled if Valgrind is installed and disabled otherwise. Individual # Valgrind tools can be disabled via --disable-valgrind-, the # default is configurable via the AX_VALGRIND_DFLT command or is to use # all commands not disabled via AX_VALGRIND_DFLT. All AX_VALGRIND_DFLT # calls must be made before the call to AX_VALGRIND_CHECK. # # If unit tests are written using a shell script and automake's # LOG_COMPILER system, the $(VALGRIND) variable can be used within the # shell scripts to enable Valgrind, as described here: # # https://www.gnu.org/software/gnulib/manual/html_node/Running-self_002dtests-under-valgrind.html # # Usage example: # # configure.ac: # # AX_VALGRIND_DFLT([sgcheck], [off]) # AX_VALGRIND_CHECK # # in each Makefile.am with tests: # # @VALGRIND_CHECK_RULES@ # VALGRIND_SUPPRESSIONS_FILES = my-project.supp # EXTRA_DIST = my-project.supp # # This results in a "check-valgrind" rule being added. Running `make # check-valgrind` in that directory will recursively run the module's test # suite (`make check`) once for each of the available Valgrind tools (out # of memcheck, helgrind and drd) while the sgcheck will be skipped unless # enabled again on the commandline with --enable-valgrind-sgcheck. The # results for each check will be output to test-suite-$toolname.log. The # target will succeed if there are zero errors and fail otherwise. # # Alternatively, a "check-valgrind-$TOOL" rule will be added, for $TOOL in # memcheck, helgrind, drd and sgcheck. These are useful because often only # some of those tools can be ran cleanly on a codebase. # # The macro supports running with and without libtool. # # LICENSE # # Copyright (c) 2014, 2015, 2016 Philip Withnall # # Copying and distribution of this file, with or without modification, are # permitted in any medium without royalty provided the copyright notice # and this notice are preserved. This file is offered as-is, without any # warranty. #serial 17 dnl Configured tools m4_define([valgrind_tool_list], [[memcheck], [helgrind], [drd], [sgcheck]]) m4_set_add_all([valgrind_exp_tool_set], [sgcheck]) m4_foreach([vgtool], [valgrind_tool_list], [m4_define([en_dflt_valgrind_]vgtool, [on])]) AC_DEFUN([AX_VALGRIND_DFLT],[ m4_define([en_dflt_valgrind_$1], [$2]) ])dnl AM_EXTRA_RECURSIVE_TARGETS([check-valgrind]) m4_foreach([vgtool], [valgrind_tool_list], [AM_EXTRA_RECURSIVE_TARGETS([check-valgrind-]vgtool)]) AC_DEFUN([AX_VALGRIND_CHECK],[ dnl Check for --enable-valgrind AC_ARG_ENABLE([valgrind], [AS_HELP_STRING([--enable-valgrind], [Whether to enable Valgrind on the unit tests])], [enable_valgrind=$enableval],[enable_valgrind=]) AS_IF([test "$enable_valgrind" != "no"],[ # Check for Valgrind. AC_CHECK_PROG([VALGRIND],[valgrind],[valgrind]) AS_IF([test "$VALGRIND" = ""],[ AS_IF([test "$enable_valgrind" = "yes"],[ AC_MSG_ERROR([Could not find valgrind; either install it or reconfigure with --disable-valgrind]) ],[ enable_valgrind=no ]) ],[ enable_valgrind=yes ]) ]) AM_CONDITIONAL([VALGRIND_ENABLED],[test "$enable_valgrind" = "yes"]) AC_SUBST([VALGRIND_ENABLED],[$enable_valgrind]) # Check for Valgrind tools we care about. [valgrind_enabled_tools=] m4_foreach([vgtool],[valgrind_tool_list],[ AC_ARG_ENABLE([valgrind-]vgtool, m4_if(m4_defn([en_dflt_valgrind_]vgtool),[off],dnl [AS_HELP_STRING([--enable-valgrind-]vgtool, [Whether to use ]vgtool[ during the Valgrind tests])],dnl [AS_HELP_STRING([--disable-valgrind-]vgtool, [Whether to skip ]vgtool[ during the Valgrind tests])]), [enable_valgrind_]vgtool[=$enableval], [enable_valgrind_]vgtool[=]) AS_IF([test "$enable_valgrind" = "no"],[ enable_valgrind_]vgtool[=no], [test "$enable_valgrind_]vgtool[" ]dnl m4_if(m4_defn([en_dflt_valgrind_]vgtool), [off], [= "yes"], [!= "no"]),[ AC_CACHE_CHECK([for Valgrind tool ]vgtool, [ax_cv_valgrind_tool_]vgtool,[ ax_cv_valgrind_tool_]vgtool[=no m4_set_contains([valgrind_exp_tool_set],vgtool, [m4_define([vgtoolx],[exp-]vgtool)], [m4_define([vgtoolx],vgtool)]) AS_IF([`$VALGRIND --tool=]vgtoolx[ --help >/dev/null 2>&1`],[ ax_cv_valgrind_tool_]vgtool[=yes ]) ]) AS_IF([test "$ax_cv_valgrind_tool_]vgtool[" = "no"],[ AS_IF([test "$enable_valgrind_]vgtool[" = "yes"],[ AC_MSG_ERROR([Valgrind does not support ]vgtool[; reconfigure with --disable-valgrind-]vgtool) ],[ enable_valgrind_]vgtool[=no ]) ],[ enable_valgrind_]vgtool[=yes ]) ]) AS_IF([test "$enable_valgrind_]vgtool[" = "yes"],[ valgrind_enabled_tools="$valgrind_enabled_tools ]m4_bpatsubst(vgtool,[^exp-])[" ]) AC_SUBST([ENABLE_VALGRIND_]vgtool,[$enable_valgrind_]vgtool) ]) AC_SUBST([valgrind_tools],["]m4_join([ ], valgrind_tool_list)["]) AC_SUBST([valgrind_enabled_tools],[$valgrind_enabled_tools]) [VALGRIND_CHECK_RULES=' # Valgrind check # # Optional: # - VALGRIND_SUPPRESSIONS_FILES: Space-separated list of Valgrind suppressions # files to load. (Default: empty) # - VALGRIND_FLAGS: General flags to pass to all Valgrind tools. # (Default: --num-callers=30) # - VALGRIND_$toolname_FLAGS: Flags to pass to Valgrind $toolname (one of: # memcheck, helgrind, drd, sgcheck). (Default: various) # Optional variables VALGRIND_SUPPRESSIONS ?= $(addprefix --suppressions=,$(VALGRIND_SUPPRESSIONS_FILES)) VALGRIND_FLAGS ?= --num-callers=30 VALGRIND_memcheck_FLAGS ?= --leak-check=full --show-reachable=no VALGRIND_helgrind_FLAGS ?= --history-level=approx VALGRIND_drd_FLAGS ?= VALGRIND_sgcheck_FLAGS ?= # Internal use valgrind_log_files = $(addprefix test-suite-,$(addsuffix .log,$(valgrind_tools))) valgrind_memcheck_flags = --tool=memcheck $(VALGRIND_memcheck_FLAGS) valgrind_helgrind_flags = --tool=helgrind $(VALGRIND_helgrind_FLAGS) valgrind_drd_flags = --tool=drd $(VALGRIND_drd_FLAGS) valgrind_sgcheck_flags = --tool=exp-sgcheck $(VALGRIND_sgcheck_FLAGS) valgrind_quiet = $(valgrind_quiet_$(V)) valgrind_quiet_ = $(valgrind_quiet_$(AM_DEFAULT_VERBOSITY)) valgrind_quiet_0 = --quiet valgrind_v_use = $(valgrind_v_use_$(V)) valgrind_v_use_ = $(valgrind_v_use_$(AM_DEFAULT_VERBOSITY)) valgrind_v_use_0 = @echo " USE " $(patsubst check-valgrind-%-am,%,$''@):; # Support running with and without libtool. ifneq ($(LIBTOOL),) valgrind_lt = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=execute else valgrind_lt = endif # Use recursive makes in order to ignore errors during check check-valgrind-am: ifeq ($(VALGRIND_ENABLED),yes) $(A''M_V_at)$(MAKE) $(AM_MAKEFLAGS) -k \ $(foreach tool, $(valgrind_enabled_tools), check-valgrind-$(tool)) else @echo "Need to reconfigure with --enable-valgrind" endif # Valgrind running VALGRIND_TESTS_ENVIRONMENT = \ $(TESTS_ENVIRONMENT) \ env VALGRIND=$(VALGRIND) \ G_SLICE=always-malloc,debug-blocks \ G_DEBUG=fatal-warnings,fatal-criticals,gc-friendly VALGRIND_LOG_COMPILER = \ $(valgrind_lt) \ $(VALGRIND) $(VALGRIND_SUPPRESSIONS) --error-exitcode=1 $(VALGRIND_FLAGS) define valgrind_tool_rule check-valgrind-$(1)-am: ifeq ($$(VALGRIND_ENABLED)-$$(ENABLE_VALGRIND_$(1)),yes-yes) ifneq ($$(TESTS),) $$(valgrind_v_use)$$(MAKE) check-TESTS \ TESTS_ENVIRONMENT="$$(VALGRIND_TESTS_ENVIRONMENT)" \ LOG_COMPILER="$$(VALGRIND_LOG_COMPILER)" \ LOG_FLAGS="$$(valgrind_$(1)_flags)" \ TEST_SUITE_LOG=test-suite-$(1).log endif else ifeq ($$(VALGRIND_ENABLED),yes) @echo "Need to reconfigure with --enable-valgrind-$(1)" else @echo "Need to reconfigure with --enable-valgrind" endif endef $(foreach tool,$(valgrind_tools),$(eval $(call valgrind_tool_rule,$(tool)))) A''M_DISTCHECK_CONFIGURE_FLAGS ?= A''M_DISTCHECK_CONFIGURE_FLAGS += --disable-valgrind MOSTLYCLEANFILES ?= MOSTLYCLEANFILES += $(valgrind_log_files) .PHONY: check-valgrind $(add-prefix check-valgrind-,$(valgrind_tools)) '] AC_SUBST([VALGRIND_CHECK_RULES]) m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([VALGRIND_CHECK_RULES])]) ]) parlatype-1.5.4/libparlatype/m4/glibtests.m40000644000175000017500000000243413176574164015736 00000000000000dnl GLIB_TESTS dnl AC_DEFUN([GLIB_TESTS], [ AC_ARG_ENABLE(installed-tests, AS_HELP_STRING([--enable-installed-tests], [Enable installation of some test cases]), [case ${enableval} in yes) ENABLE_INSTALLED_TESTS="1" ;; no) ENABLE_INSTALLED_TESTS="" ;; *) AC_MSG_ERROR([bad value ${enableval} for --enable-installed-tests]) ;; esac]) AM_CONDITIONAL([ENABLE_INSTALLED_TESTS], test "$ENABLE_INSTALLED_TESTS" = "1") AC_ARG_ENABLE(always-build-tests, AS_HELP_STRING([--enable-always-build-tests], [Enable always building tests during 'make all']), [case ${enableval} in yes) ENABLE_ALWAYS_BUILD_TESTS="1" ;; no) ENABLE_ALWAYS_BUILD_TESTS="" ;; *) AC_MSG_ERROR([bad value ${enableval} for --enable-always-build-tests]) ;; esac]) AM_CONDITIONAL([ENABLE_ALWAYS_BUILD_TESTS], test "$ENABLE_ALWAYS_BUILD_TESTS" = "1") if test "$ENABLE_INSTALLED_TESTS" = "1"; then AC_SUBST(installed_test_metadir, [${datadir}/installed-tests/]AC_PACKAGE_NAME) AC_SUBST(installed_testdir, [${libexecdir}/installed-tests/]AC_PACKAGE_NAME) fi ]) parlatype-1.5.4/libparlatype/m4/ltsugar.m40000644000175000017500000001042413167645057015415 00000000000000# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- # # Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 6 ltsugar.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) # lt_join(SEP, ARG1, [ARG2...]) # ----------------------------- # Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their # associated separator. # Needed until we can rely on m4_join from Autoconf 2.62, since all earlier # versions in m4sugar had bugs. m4_define([lt_join], [m4_if([$#], [1], [], [$#], [2], [[$2]], [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) m4_define([_lt_join], [m4_if([$#$2], [2], [], [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) # lt_car(LIST) # lt_cdr(LIST) # ------------ # Manipulate m4 lists. # These macros are necessary as long as will still need to support # Autoconf-2.59 which quotes differently. m4_define([lt_car], [[$1]]) m4_define([lt_cdr], [m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], [$#], 1, [], [m4_dquote(m4_shift($@))])]) m4_define([lt_unquote], $1) # lt_append(MACRO-NAME, STRING, [SEPARATOR]) # ------------------------------------------ # Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. # Note that neither SEPARATOR nor STRING are expanded; they are appended # to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). # No SEPARATOR is output if MACRO-NAME was previously undefined (different # than defined and empty). # # This macro is needed until we can rely on Autoconf 2.62, since earlier # versions of m4sugar mistakenly expanded SEPARATOR but not STRING. m4_define([lt_append], [m4_define([$1], m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) # lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) # ---------------------------------------------------------- # Produce a SEP delimited list of all paired combinations of elements of # PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list # has the form PREFIXmINFIXSUFFIXn. # Needed until we can rely on m4_combine added in Autoconf 2.62. m4_define([lt_combine], [m4_if(m4_eval([$# > 3]), [1], [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl [[m4_foreach([_Lt_prefix], [$2], [m4_foreach([_Lt_suffix], ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) # lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) # ----------------------------------------------------------------------- # Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited # by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. m4_define([lt_if_append_uniq], [m4_ifdef([$1], [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], [lt_append([$1], [$2], [$3])$4], [$5])], [lt_append([$1], [$2], [$3])$4])]) # lt_dict_add(DICT, KEY, VALUE) # ----------------------------- m4_define([lt_dict_add], [m4_define([$1($2)], [$3])]) # lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) # -------------------------------------------- m4_define([lt_dict_add_subkey], [m4_define([$1($2:$3)], [$4])]) # lt_dict_fetch(DICT, KEY, [SUBKEY]) # ---------------------------------- m4_define([lt_dict_fetch], [m4_ifval([$3], m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) # lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) # ----------------------------------------------------------------- m4_define([lt_if_dict_fetch], [m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], [$5], [$6])]) # lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) # -------------------------------------------------------------- m4_define([lt_dict_filter], [m4_if([$5], [], [], [lt_join(m4_quote(m4_default([$4], [[, ]])), lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl ]) parlatype-1.5.4/libparlatype/m4/ax_code_coverage.m40000644000175000017500000002707413176574164017222 00000000000000# =========================================================================== # https://www.gnu.org/software/autoconf-archive/ax_code_coverage.html # =========================================================================== # # SYNOPSIS # # AX_CODE_COVERAGE() # # DESCRIPTION # # Defines CODE_COVERAGE_CPPFLAGS, CODE_COVERAGE_CFLAGS, # CODE_COVERAGE_CXXFLAGS and CODE_COVERAGE_LIBS which should be included # in the CPPFLAGS, CFLAGS CXXFLAGS and LIBS/LIBADD variables of every # build target (program or library) which should be built with code # coverage support. Also defines CODE_COVERAGE_RULES which should be # substituted in your Makefile; and $enable_code_coverage which can be # used in subsequent configure output. CODE_COVERAGE_ENABLED is defined # and substituted, and corresponds to the value of the # --enable-code-coverage option, which defaults to being disabled. # # Test also for gcov program and create GCOV variable that could be # substituted. # # Note that all optimization flags in CFLAGS must be disabled when code # coverage is enabled. # # Usage example: # # configure.ac: # # AX_CODE_COVERAGE # # Makefile.am: # # @CODE_COVERAGE_RULES@ # my_program_LIBS = ... $(CODE_COVERAGE_LIBS) ... # my_program_CPPFLAGS = ... $(CODE_COVERAGE_CPPFLAGS) ... # my_program_CFLAGS = ... $(CODE_COVERAGE_CFLAGS) ... # my_program_CXXFLAGS = ... $(CODE_COVERAGE_CXXFLAGS) ... # # This results in a "check-code-coverage" rule being added to any # Makefile.am which includes "@CODE_COVERAGE_RULES@" (assuming the module # has been configured with --enable-code-coverage). Running `make # check-code-coverage` in that directory will run the module's test suite # (`make check`) and build a code coverage report detailing the code which # was touched, then print the URI for the report. # # In earlier versions of this macro, CODE_COVERAGE_LDFLAGS was defined # instead of CODE_COVERAGE_LIBS. They are both still defined, but use of # CODE_COVERAGE_LIBS is preferred for clarity; CODE_COVERAGE_LDFLAGS is # deprecated. They have the same value. # # This code was derived from Makefile.decl in GLib, originally licenced # under LGPLv2.1+. # # LICENSE # # Copyright (c) 2012, 2016 Philip Withnall # Copyright (c) 2012 Xan Lopez # Copyright (c) 2012 Christian Persch # Copyright (c) 2012 Paolo Borelli # Copyright (c) 2012 Dan Winship # Copyright (c) 2015 Bastien ROUCARIES # # This library is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or (at # your option) any later version. # # This library is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with this program. If not, see . #serial 25 AC_DEFUN([AX_CODE_COVERAGE],[ dnl Check for --enable-code-coverage AC_REQUIRE([AC_PROG_SED]) # allow to override gcov location AC_ARG_WITH([gcov], [AS_HELP_STRING([--with-gcov[=GCOV]], [use given GCOV for coverage (GCOV=gcov).])], [_AX_CODE_COVERAGE_GCOV_PROG_WITH=$with_gcov], [_AX_CODE_COVERAGE_GCOV_PROG_WITH=gcov]) AC_MSG_CHECKING([whether to build with code coverage support]) AC_ARG_ENABLE([code-coverage], AS_HELP_STRING([--enable-code-coverage], [Whether to enable code coverage support]),, enable_code_coverage=no) AM_CONDITIONAL([CODE_COVERAGE_ENABLED], [test x$enable_code_coverage = xyes]) AC_SUBST([CODE_COVERAGE_ENABLED], [$enable_code_coverage]) AC_MSG_RESULT($enable_code_coverage) AS_IF([ test "$enable_code_coverage" = "yes" ], [ # check for gcov AC_CHECK_TOOL([GCOV], [$_AX_CODE_COVERAGE_GCOV_PROG_WITH], [:]) AS_IF([test "X$GCOV" = "X:"], [AC_MSG_ERROR([gcov is needed to do coverage])]) AC_SUBST([GCOV]) dnl Check if gcc is being used AS_IF([ test "$GCC" = "no" ], [ AC_MSG_ERROR([not compiling with gcc, which is required for gcov code coverage]) ]) AC_CHECK_PROG([LCOV], [lcov], [lcov]) AC_CHECK_PROG([GENHTML], [genhtml], [genhtml]) AS_IF([ test -z "$LCOV" ], [ AC_MSG_ERROR([To enable code coverage reporting you must have lcov installed]) ]) AS_IF([ test -z "$GENHTML" ], [ AC_MSG_ERROR([Could not find genhtml from the lcov package]) ]) dnl Build the code coverage flags dnl Define CODE_COVERAGE_LDFLAGS for backwards compatibility CODE_COVERAGE_CPPFLAGS="-DNDEBUG" CODE_COVERAGE_CFLAGS="-O0 -g -fprofile-arcs -ftest-coverage" CODE_COVERAGE_CXXFLAGS="-O0 -g -fprofile-arcs -ftest-coverage" CODE_COVERAGE_LIBS="-lgcov" CODE_COVERAGE_LDFLAGS="$CODE_COVERAGE_LIBS" AC_SUBST([CODE_COVERAGE_CPPFLAGS]) AC_SUBST([CODE_COVERAGE_CFLAGS]) AC_SUBST([CODE_COVERAGE_CXXFLAGS]) AC_SUBST([CODE_COVERAGE_LIBS]) AC_SUBST([CODE_COVERAGE_LDFLAGS]) [CODE_COVERAGE_RULES_CHECK=' -$(A''M_V_at)$(MAKE) $(AM_MAKEFLAGS) -k check $(A''M_V_at)$(MAKE) $(AM_MAKEFLAGS) code-coverage-capture '] [CODE_COVERAGE_RULES_CAPTURE=' $(code_coverage_v_lcov_cap)$(LCOV) $(code_coverage_quiet) $(addprefix --directory ,$(CODE_COVERAGE_DIRECTORY)) --capture --output-file "$(CODE_COVERAGE_OUTPUT_FILE).tmp" --test-name "$(call code_coverage_sanitize,$(PACKAGE_NAME)-$(PACKAGE_VERSION))" --no-checksum --compat-libtool $(CODE_COVERAGE_LCOV_SHOPTS) $(CODE_COVERAGE_LCOV_OPTIONS) $(code_coverage_v_lcov_ign)$(LCOV) $(code_coverage_quiet) $(addprefix --directory ,$(CODE_COVERAGE_DIRECTORY)) --remove "$(CODE_COVERAGE_OUTPUT_FILE).tmp" "/tmp/*" $(CODE_COVERAGE_IGNORE_PATTERN) --output-file "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_LCOV_SHOPTS) $(CODE_COVERAGE_LCOV_RMOPTS) -@rm -f $(CODE_COVERAGE_OUTPUT_FILE).tmp $(code_coverage_v_genhtml)LANG=C $(GENHTML) $(code_coverage_quiet) $(addprefix --prefix ,$(CODE_COVERAGE_DIRECTORY)) --output-directory "$(CODE_COVERAGE_OUTPUT_DIRECTORY)" --title "$(PACKAGE_NAME)-$(PACKAGE_VERSION) Code Coverage" --legend --show-details "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_GENHTML_OPTIONS) @echo "file://$(abs_builddir)/$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html" '] [CODE_COVERAGE_RULES_CLEAN=' clean: code-coverage-clean distclean: code-coverage-clean code-coverage-clean: -$(LCOV) --directory $(top_builddir) -z -rm -rf $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_FILE).tmp $(CODE_COVERAGE_OUTPUT_DIRECTORY) -find . \( -name "*.gcda" -o -name "*.gcno" -o -name "*.gcov" \) -delete '] ], [ [CODE_COVERAGE_RULES_CHECK=' @echo "Need to reconfigure with --enable-code-coverage" '] CODE_COVERAGE_RULES_CAPTURE="$CODE_COVERAGE_RULES_CHECK" CODE_COVERAGE_RULES_CLEAN='' ]) [CODE_COVERAGE_RULES=' # Code coverage # # Optional: # - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting. # Multiple directories may be specified, separated by whitespace. # (Default: $(top_builddir)) # - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated # by lcov for code coverage. (Default: # $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info) # - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage # reports to be created. (Default: # $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage) # - CODE_COVERAGE_BRANCH_COVERAGE: Set to 1 to enforce branch coverage, # set to 0 to disable it and leave empty to stay with the default. # (Default: empty) # - CODE_COVERAGE_LCOV_SHOPTS_DEFAULT: Extra options shared between both lcov # instances. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE) # - CODE_COVERAGE_LCOV_SHOPTS: Extra options to shared between both lcov # instances. (Default: $CODE_COVERAGE_LCOV_SHOPTS_DEFAULT) # - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov # - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the # collecting lcov instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) # - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the collecting lcov # instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) # - CODE_COVERAGE_LCOV_RMOPTS_DEFAULT: Extra options to pass to the filtering # lcov instance. (Default: empty) # - CODE_COVERAGE_LCOV_RMOPTS: Extra options to pass to the filtering lcov # instance. (Default: $CODE_COVERAGE_LCOV_RMOPTS_DEFAULT) # - CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT: Extra options to pass to the # genhtml instance. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE) # - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml # instance. (Default: $CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT) # - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore # # The generated report will be titled using the $(PACKAGE_NAME) and # $(PACKAGE_VERSION). In order to add the current git hash to the title, # use the git-version-gen script, available online. # Optional variables CODE_COVERAGE_DIRECTORY ?= $(top_builddir) CODE_COVERAGE_OUTPUT_FILE ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info CODE_COVERAGE_OUTPUT_DIRECTORY ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage CODE_COVERAGE_BRANCH_COVERAGE ?= CODE_COVERAGE_LCOV_SHOPTS_DEFAULT ?= $(if $(CODE_COVERAGE_BRANCH_COVERAGE),\ --rc lcov_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE)) CODE_COVERAGE_LCOV_SHOPTS ?= $(CODE_COVERAGE_LCOV_SHOPTS_DEFAULT) CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool "$(GCOV)" CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= $(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) CODE_COVERAGE_LCOV_OPTIONS ?= $(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) CODE_COVERAGE_LCOV_RMOPTS_DEFAULT ?= CODE_COVERAGE_LCOV_RMOPTS ?= $(CODE_COVERAGE_LCOV_RMOPTS_DEFAULT) CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT ?=\ $(if $(CODE_COVERAGE_BRANCH_COVERAGE),\ --rc genhtml_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE)) CODE_COVERAGE_GENHTML_OPTIONS ?= $(CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT) CODE_COVERAGE_IGNORE_PATTERN ?= GITIGNOREFILES ?= GITIGNOREFILES += $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_DIRECTORY) code_coverage_v_lcov_cap = $(code_coverage_v_lcov_cap_$(V)) code_coverage_v_lcov_cap_ = $(code_coverage_v_lcov_cap_$(AM_DEFAULT_VERBOSITY)) code_coverage_v_lcov_cap_0 = @echo " LCOV --capture"\ $(CODE_COVERAGE_OUTPUT_FILE); code_coverage_v_lcov_ign = $(code_coverage_v_lcov_ign_$(V)) code_coverage_v_lcov_ign_ = $(code_coverage_v_lcov_ign_$(AM_DEFAULT_VERBOSITY)) code_coverage_v_lcov_ign_0 = @echo " LCOV --remove /tmp/*"\ $(CODE_COVERAGE_IGNORE_PATTERN); code_coverage_v_genhtml = $(code_coverage_v_genhtml_$(V)) code_coverage_v_genhtml_ = $(code_coverage_v_genhtml_$(AM_DEFAULT_VERBOSITY)) code_coverage_v_genhtml_0 = @echo " GEN " $(CODE_COVERAGE_OUTPUT_DIRECTORY); code_coverage_quiet = $(code_coverage_quiet_$(V)) code_coverage_quiet_ = $(code_coverage_quiet_$(AM_DEFAULT_VERBOSITY)) code_coverage_quiet_0 = --quiet # sanitizes the test-name: replaces with underscores: dashes and dots code_coverage_sanitize = $(subst -,_,$(subst .,_,$(1))) # Use recursive makes in order to ignore errors during check check-code-coverage:'"$CODE_COVERAGE_RULES_CHECK"' # Capture code coverage data code-coverage-capture: code-coverage-capture-hook'"$CODE_COVERAGE_RULES_CAPTURE"' # Hook rule executed before code-coverage-capture, overridable by the user code-coverage-capture-hook: '"$CODE_COVERAGE_RULES_CLEAN"' A''M_DISTCHECK_CONFIGURE_FLAGS ?= A''M_DISTCHECK_CONFIGURE_FLAGS += --disable-code-coverage .PHONY: check-code-coverage code-coverage-capture code-coverage-capture-hook code-coverage-clean '] AC_SUBST([CODE_COVERAGE_RULES]) m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([CODE_COVERAGE_RULES])]) ]) parlatype-1.5.4/libparlatype/m4/libtool.m40000644000175000017500000106011113167645057015377 00000000000000# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008, 2009, 2010, 2011 Free Software # Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. m4_define([_LT_COPYING], [dnl # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008, 2009, 2010, 2011 Free Software # Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. # # GNU Libtool is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, or # obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ]) # serial 57 LT_INIT # LT_PREREQ(VERSION) # ------------------ # Complain and exit if this libtool version is less that VERSION. m4_defun([LT_PREREQ], [m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, [m4_default([$3], [m4_fatal([Libtool version $1 or higher is required], 63)])], [$2])]) # _LT_CHECK_BUILDDIR # ------------------ # Complain if the absolute build directory name contains unusual characters m4_defun([_LT_CHECK_BUILDDIR], [case `pwd` in *\ * | *\ *) AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; esac ]) # LT_INIT([OPTIONS]) # ------------------ AC_DEFUN([LT_INIT], [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl AC_BEFORE([$0], [LT_LANG])dnl AC_BEFORE([$0], [LT_OUTPUT])dnl AC_BEFORE([$0], [LTDL_INIT])dnl m4_require([_LT_CHECK_BUILDDIR])dnl dnl Autoconf doesn't catch unexpanded LT_ macros by default: m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 dnl unless we require an AC_DEFUNed macro: AC_REQUIRE([LTOPTIONS_VERSION])dnl AC_REQUIRE([LTSUGAR_VERSION])dnl AC_REQUIRE([LTVERSION_VERSION])dnl AC_REQUIRE([LTOBSOLETE_VERSION])dnl m4_require([_LT_PROG_LTMAIN])dnl _LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) dnl Parse OPTIONS _LT_SET_OPTIONS([$0], [$1]) # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ltmain" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl _LT_SETUP # Only expand once: m4_define([LT_INIT]) ])# LT_INIT # Old names: AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PROG_LIBTOOL], []) dnl AC_DEFUN([AM_PROG_LIBTOOL], []) # _LT_CC_BASENAME(CC) # ------------------- # Calculate cc_basename. Skip known compiler wrappers and cross-prefix. m4_defun([_LT_CC_BASENAME], [for cc_temp in $1""; do case $cc_temp in compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` ]) # _LT_FILEUTILS_DEFAULTS # ---------------------- # It is okay to use these file commands and assume they have been set # sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. m4_defun([_LT_FILEUTILS_DEFAULTS], [: ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} ])# _LT_FILEUTILS_DEFAULTS # _LT_SETUP # --------- m4_defun([_LT_SETUP], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl _LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl dnl _LT_DECL([], [host_alias], [0], [The host system])dnl _LT_DECL([], [host], [0])dnl _LT_DECL([], [host_os], [0])dnl dnl _LT_DECL([], [build_alias], [0], [The build system])dnl _LT_DECL([], [build], [0])dnl _LT_DECL([], [build_os], [0])dnl dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl dnl AC_REQUIRE([AC_PROG_LN_S])dnl test -z "$LN_S" && LN_S="ln -s" _LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl dnl AC_REQUIRE([LT_CMD_MAX_LEN])dnl _LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl _LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl m4_require([_LT_CMD_RELOAD])dnl m4_require([_LT_CHECK_MAGIC_METHOD])dnl m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl m4_require([_LT_CMD_OLD_ARCHIVE])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_WITH_SYSROOT])dnl _LT_CONFIG_LIBTOOL_INIT([ # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi ]) if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi _LT_CHECK_OBJDIR m4_require([_LT_TAG_COMPILER])dnl case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld="$lt_cv_prog_gnu_ld" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o _LT_CC_BASENAME([$compiler]) # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then _LT_PATH_MAGIC fi ;; esac # Use C for the default configuration in the libtool script LT_SUPPORTED_TAG([CC]) _LT_LANG_C_CONFIG _LT_LANG_DEFAULT_CONFIG _LT_CONFIG_COMMANDS ])# _LT_SETUP # _LT_PREPARE_SED_QUOTE_VARS # -------------------------- # Define a few sed substitution that help us do robust quoting. m4_defun([_LT_PREPARE_SED_QUOTE_VARS], [# Backslashify metacharacters that are still active within # double-quoted strings. sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\([["`\\]]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' ]) # _LT_PROG_LTMAIN # --------------- # Note that this code is called both from `configure', and `config.status' # now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, # `config.status' has no value for ac_aux_dir unless we are using Automake, # so we pass a copy along to make sure it has a sensible value anyway. m4_defun([_LT_PROG_LTMAIN], [m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl _LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) ltmain="$ac_aux_dir/ltmain.sh" ])# _LT_PROG_LTMAIN ## ------------------------------------- ## ## Accumulate code for creating libtool. ## ## ------------------------------------- ## # So that we can recreate a full libtool script including additional # tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS # in macros and then make a single call at the end using the `libtool' # label. # _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) # ---------------------------------------- # Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL_INIT], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_INIT], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_INIT]) # _LT_CONFIG_LIBTOOL([COMMANDS]) # ------------------------------ # Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) # _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) # ----------------------------------------------------- m4_defun([_LT_CONFIG_SAVE_COMMANDS], [_LT_CONFIG_LIBTOOL([$1]) _LT_CONFIG_LIBTOOL_INIT([$2]) ]) # _LT_FORMAT_COMMENT([COMMENT]) # ----------------------------- # Add leading comment marks to the start of each line, and a trailing # full-stop to the whole comment if one is not present already. m4_define([_LT_FORMAT_COMMENT], [m4_ifval([$1], [ m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) )]) ## ------------------------ ## ## FIXME: Eliminate VARNAME ## ## ------------------------ ## # _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) # ------------------------------------------------------------------- # CONFIGNAME is the name given to the value in the libtool script. # VARNAME is the (base) name used in the configure script. # VALUE may be 0, 1 or 2 for a computed quote escaped value based on # VARNAME. Any other value will be used directly. m4_define([_LT_DECL], [lt_if_append_uniq([lt_decl_varnames], [$2], [, ], [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], [m4_ifval([$1], [$1], [$2])]) lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) m4_ifval([$4], [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) lt_dict_add_subkey([lt_decl_dict], [$2], [tagged?], [m4_ifval([$5], [yes], [no])])]) ]) # _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) # -------------------------------------------------------- m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) # lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_tag_varnames], [_lt_decl_filter([tagged?], [yes], $@)]) # _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) # --------------------------------------------------------- m4_define([_lt_decl_filter], [m4_case([$#], [0], [m4_fatal([$0: too few arguments: $#])], [1], [m4_fatal([$0: too few arguments: $#: $1])], [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], [lt_dict_filter([lt_decl_dict], $@)])[]dnl ]) # lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) # -------------------------------------------------- m4_define([lt_decl_quote_varnames], [_lt_decl_filter([value], [1], $@)]) # lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_dquote_varnames], [_lt_decl_filter([value], [2], $@)]) # lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_varnames_tagged], [m4_assert([$# <= 2])dnl _$0(m4_quote(m4_default([$1], [[, ]])), m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) m4_define([_lt_decl_varnames_tagged], [m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) # lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_all_varnames], [_$0(m4_quote(m4_default([$1], [[, ]])), m4_if([$2], [], m4_quote(lt_decl_varnames), m4_quote(m4_shift($@))))[]dnl ]) m4_define([_lt_decl_all_varnames], [lt_join($@, lt_decl_varnames_tagged([$1], lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl ]) # _LT_CONFIG_STATUS_DECLARE([VARNAME]) # ------------------------------------ # Quote a variable value, and forward it to `config.status' so that its # declaration there will have the same value as in `configure'. VARNAME # must have a single quote delimited value for this to work. m4_define([_LT_CONFIG_STATUS_DECLARE], [$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) # _LT_CONFIG_STATUS_DECLARATIONS # ------------------------------ # We delimit libtool config variables with single quotes, so when # we write them to config.status, we have to be sure to quote all # embedded single quotes properly. In configure, this macro expands # each variable declared with _LT_DECL (and _LT_TAGDECL) into: # # ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAGS # ---------------- # Output comment and list of tags supported by the script m4_defun([_LT_LIBTOOL_TAGS], [_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl available_tags="_LT_TAGS"dnl ]) # _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) # ----------------------------------- # Extract the dictionary values for VARNAME (optionally with TAG) and # expand to a commented shell variable setting: # # # Some comment about what VAR is for. # visible_name=$lt_internal_name m4_define([_LT_LIBTOOL_DECLARE], [_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [description])))[]dnl m4_pushdef([_libtool_name], m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), [0], [_libtool_name=[$]$1], [1], [_libtool_name=$lt_[]$1], [2], [_libtool_name=$lt_[]$1], [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl ]) # _LT_LIBTOOL_CONFIG_VARS # ----------------------- # Produce commented declarations of non-tagged libtool config variables # suitable for insertion in the LIBTOOL CONFIG section of the `libtool' # script. Tagged libtool config variables (even for the LIBTOOL CONFIG # section) are produced by _LT_LIBTOOL_TAG_VARS. m4_defun([_LT_LIBTOOL_CONFIG_VARS], [m4_foreach([_lt_var], m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAG_VARS(TAG) # ------------------------- m4_define([_LT_LIBTOOL_TAG_VARS], [m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) # _LT_TAGVAR(VARNAME, [TAGNAME]) # ------------------------------ m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) # _LT_CONFIG_COMMANDS # ------------------- # Send accumulated output to $CONFIG_STATUS. Thanks to the lists of # variables for single and double quote escaping we saved from calls # to _LT_DECL, we can put quote escaped variables declarations # into `config.status', and then the shell code to quote escape them in # for loops in `config.status'. Finally, any additional code accumulated # from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. m4_defun([_LT_CONFIG_COMMANDS], [AC_PROVIDE_IFELSE([LT_OUTPUT], dnl If the libtool generation code has been placed in $CONFIG_LT, dnl instead of duplicating it all over again into config.status, dnl then we will have config.status run $CONFIG_LT later, so it dnl needs to know what name is stored there: [AC_CONFIG_COMMANDS([libtool], [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], dnl If the libtool generation code is destined for config.status, dnl expand the accumulated commands and init code now: [AC_CONFIG_COMMANDS([libtool], [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) ])#_LT_CONFIG_COMMANDS # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], [ # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' _LT_CONFIG_STATUS_DECLARATIONS LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$[]1 _LTECHO_EOF' } # Quote evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_quote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_dquote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done _LT_OUTPUT_LIBTOOL_INIT ]) # _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) # ------------------------------------ # Generate a child script FILE with all initialization necessary to # reuse the environment learned by the parent script, and make the # file executable. If COMMENT is supplied, it is inserted after the # `#!' sequence but before initialization text begins. After this # macro, additional text can be appended to FILE to form the body of # the child script. The macro ends with non-zero status if the # file could not be fully written (such as if the disk is full). m4_ifdef([AS_INIT_GENERATED], [m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], [m4_defun([_LT_GENERATED_FILE_INIT], [m4_require([AS_PREPARE])]dnl [m4_pushdef([AS_MESSAGE_LOG_FD])]dnl [lt_write_fail=0 cat >$1 <<_ASEOF || lt_write_fail=1 #! $SHELL # Generated by $as_me. $2 SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$1 <<\_ASEOF || lt_write_fail=1 AS_SHELL_SANITIZE _AS_PREPARE exec AS_MESSAGE_FD>&1 _ASEOF test $lt_write_fail = 0 && chmod +x $1[]dnl m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT # LT_OUTPUT # --------- # This macro allows early generation of the libtool script (before # AC_OUTPUT is called), incase it is used in configure for compilation # tests. AC_DEFUN([LT_OUTPUT], [: ${CONFIG_LT=./config.lt} AC_MSG_NOTICE([creating $CONFIG_LT]) _LT_GENERATED_FILE_INIT(["$CONFIG_LT"], [# Run this file to recreate a libtool stub with the current configuration.]) cat >>"$CONFIG_LT" <<\_LTEOF lt_cl_silent=false exec AS_MESSAGE_LOG_FD>>config.log { echo AS_BOX([Running $as_me.]) } >&AS_MESSAGE_LOG_FD lt_cl_help="\ \`$as_me' creates a local libtool stub from the current configuration, for use in further configure time tests before the real libtool is generated. Usage: $[0] [[OPTIONS]] -h, --help print this help, then exit -V, --version print version number, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files Report bugs to ." lt_cl_version="\ m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) configured by $[0], generated by m4_PACKAGE_STRING. Copyright (C) 2011 Free Software Foundation, Inc. This config.lt script is free software; the Free Software Foundation gives unlimited permision to copy, distribute and modify it." while test $[#] != 0 do case $[1] in --version | --v* | -V ) echo "$lt_cl_version"; exit 0 ;; --help | --h* | -h ) echo "$lt_cl_help"; exit 0 ;; --debug | --d* | -d ) debug=: ;; --quiet | --q* | --silent | --s* | -q ) lt_cl_silent=: ;; -*) AC_MSG_ERROR([unrecognized option: $[1] Try \`$[0] --help' for more information.]) ;; *) AC_MSG_ERROR([unrecognized argument: $[1] Try \`$[0] --help' for more information.]) ;; esac shift done if $lt_cl_silent; then exec AS_MESSAGE_FD>/dev/null fi _LTEOF cat >>"$CONFIG_LT" <<_LTEOF _LT_OUTPUT_LIBTOOL_COMMANDS_INIT _LTEOF cat >>"$CONFIG_LT" <<\_LTEOF AC_MSG_NOTICE([creating $ofile]) _LT_OUTPUT_LIBTOOL_COMMANDS AS_EXIT(0) _LTEOF chmod +x "$CONFIG_LT" # configure is writing to config.log, but config.lt does its own redirection, # appending to config.log, which fails on DOS, as config.log is still kept # open by configure. Here we exec the FD to /dev/null, effectively closing # config.log, so it can be properly (re)opened and appended to by config.lt. lt_cl_success=: test "$silent" = yes && lt_config_lt_args="$lt_config_lt_args --quiet" exec AS_MESSAGE_LOG_FD>/dev/null $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false exec AS_MESSAGE_LOG_FD>>config.log $lt_cl_success || AS_EXIT(1) ])# LT_OUTPUT # _LT_CONFIG(TAG) # --------------- # If TAG is the built-in tag, create an initial libtool script with a # default configuration from the untagged config vars. Otherwise add code # to config.status for appending the configuration named by TAG from the # matching tagged config vars. m4_defun([_LT_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_CONFIG_SAVE_COMMANDS([ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl m4_if(_LT_TAG, [C], [ # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi cfgfile="${ofile}T" trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # _LT_COPYING _LT_LIBTOOL_TAGS # ### BEGIN LIBTOOL CONFIG _LT_LIBTOOL_CONFIG_VARS _LT_LIBTOOL_TAG_VARS # ### END LIBTOOL CONFIG _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac _LT_PROG_LTMAIN # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) _LT_PROG_REPLACE_SHELLFNS mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ], [cat <<_LT_EOF >> "$ofile" dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded dnl in a comment (ie after a #). # ### BEGIN LIBTOOL TAG CONFIG: $1 _LT_LIBTOOL_TAG_VARS(_LT_TAG) # ### END LIBTOOL TAG CONFIG: $1 _LT_EOF ])dnl /m4_if ], [m4_if([$1], [], [ PACKAGE='$PACKAGE' VERSION='$VERSION' TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile'], []) ])dnl /_LT_CONFIG_SAVE_COMMANDS ])# _LT_CONFIG # LT_SUPPORTED_TAG(TAG) # --------------------- # Trace this macro to discover what tags are supported by the libtool # --tag option, using: # autoconf --trace 'LT_SUPPORTED_TAG:$1' AC_DEFUN([LT_SUPPORTED_TAG], []) # C support is built-in for now m4_define([_LT_LANG_C_enabled], []) m4_define([_LT_TAGS], []) # LT_LANG(LANG) # ------------- # Enable libtool support for the given language if not already enabled. AC_DEFUN([LT_LANG], [AC_BEFORE([$0], [LT_OUTPUT])dnl m4_case([$1], [C], [_LT_LANG(C)], [C++], [_LT_LANG(CXX)], [Go], [_LT_LANG(GO)], [Java], [_LT_LANG(GCJ)], [Fortran 77], [_LT_LANG(F77)], [Fortran], [_LT_LANG(FC)], [Windows Resource], [_LT_LANG(RC)], [m4_ifdef([_LT_LANG_]$1[_CONFIG], [_LT_LANG($1)], [m4_fatal([$0: unsupported language: "$1"])])])dnl ])# LT_LANG # _LT_LANG(LANGNAME) # ------------------ m4_defun([_LT_LANG], [m4_ifdef([_LT_LANG_]$1[_enabled], [], [LT_SUPPORTED_TAG([$1])dnl m4_append([_LT_TAGS], [$1 ])dnl m4_define([_LT_LANG_]$1[_enabled], [])dnl _LT_LANG_$1_CONFIG($1)])dnl ])# _LT_LANG m4_ifndef([AC_PROG_GO], [ ############################################################ # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_GO. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # ############################################################ m4_defun([AC_PROG_GO], [AC_LANG_PUSH(Go)dnl AC_ARG_VAR([GOC], [Go compiler command])dnl AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl _AC_ARG_VAR_LDFLAGS()dnl AC_CHECK_TOOL(GOC, gccgo) if test -z "$GOC"; then if test -n "$ac_tool_prefix"; then AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) fi fi if test -z "$GOC"; then AC_CHECK_PROG(GOC, gccgo, gccgo, false) fi ])#m4_defun ])#m4_ifndef # _LT_LANG_DEFAULT_CONFIG # ----------------------- m4_defun([_LT_LANG_DEFAULT_CONFIG], [AC_PROVIDE_IFELSE([AC_PROG_CXX], [LT_LANG(CXX)], [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) AC_PROVIDE_IFELSE([AC_PROG_F77], [LT_LANG(F77)], [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) AC_PROVIDE_IFELSE([AC_PROG_FC], [LT_LANG(FC)], [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal dnl pulling things in needlessly. AC_PROVIDE_IFELSE([AC_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([LT_PROG_GCJ], [LT_LANG(GCJ)], [m4_ifdef([AC_PROG_GCJ], [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([A][M_PROG_GCJ], [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([LT_PROG_GCJ], [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) AC_PROVIDE_IFELSE([AC_PROG_GO], [LT_LANG(GO)], [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) AC_PROVIDE_IFELSE([LT_PROG_RC], [LT_LANG(RC)], [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) ])# _LT_LANG_DEFAULT_CONFIG # Obsolete macros: AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_CXX], []) dnl AC_DEFUN([AC_LIBTOOL_F77], []) dnl AC_DEFUN([AC_LIBTOOL_FC], []) dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) dnl AC_DEFUN([AC_LIBTOOL_RC], []) # _LT_TAG_COMPILER # ---------------- m4_defun([_LT_TAG_COMPILER], [AC_REQUIRE([AC_PROG_CC])dnl _LT_DECL([LTCC], [CC], [1], [A C compiler])dnl _LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl _LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl _LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC ])# _LT_TAG_COMPILER # _LT_COMPILER_BOILERPLATE # ------------------------ # Check for compiler boilerplate output or warnings with # the simple compiler test code. m4_defun([_LT_COMPILER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ])# _LT_COMPILER_BOILERPLATE # _LT_LINKER_BOILERPLATE # ---------------------- # Check for linker boilerplate output or warnings with # the simple link test code. m4_defun([_LT_LINKER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* ])# _LT_LINKER_BOILERPLATE # _LT_REQUIRED_DARWIN_CHECKS # ------------------------- m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ case $host_os in rhapsody* | darwin*) AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) AC_CHECK_TOOL([LIPO], [lipo], [:]) AC_CHECK_TOOL([OTOOL], [otool], [:]) AC_CHECK_TOOL([OTOOL64], [otool64], [:]) _LT_DECL([], [DSYMUTIL], [1], [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) _LT_DECL([], [NMEDIT], [1], [Tool to change global to local symbols on Mac OS X]) _LT_DECL([], [LIPO], [1], [Tool to manipulate fat objects and archives on Mac OS X]) _LT_DECL([], [OTOOL], [1], [ldd/readelf like tool for Mach-O binaries on Mac OS X]) _LT_DECL([], [OTOOL64], [1], [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], [lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? # If there is a non-empty error log, and "single_module" # appears in it, assume the flag caused a linker warning if test -s conftest.err && $GREP single_module conftest.err; then cat conftest.err >&AS_MESSAGE_LOG_FD # Otherwise, if the output was created with a 0 exit code from # the compiler, it worked. elif test -f libconftest.dylib && test $_lt_result -eq 0; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&AS_MESSAGE_LOG_FD fi rm -rf libconftest.dylib* rm -f conftest.* fi]) AC_CACHE_CHECK([for -exported_symbols_list linker flag], [lt_cv_ld_exported_symbols_list], [lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [lt_cv_ld_exported_symbols_list=yes], [lt_cv_ld_exported_symbols_list=no]) LDFLAGS="$save_LDFLAGS" ]) AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], [lt_cv_ld_force_load=no cat > conftest.c << _LT_EOF int forced_loaded() { return 2;} _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD cat > conftest.c << _LT_EOF int main() { return 0;} _LT_EOF echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err _lt_result=$? if test -s conftest.err && $GREP force_load conftest.err; then cat conftest.err >&AS_MESSAGE_LOG_FD elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then lt_cv_ld_force_load=yes else cat conftest.err >&AS_MESSAGE_LOG_FD fi rm -f conftest.err libconftest.a conftest conftest.c rm -rf conftest.dSYM ]) case $host_os in rhapsody* | darwin1.[[012]]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[[012]]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac ]) # _LT_DARWIN_LINKER_FEATURES([TAG]) # --------------------------------- # Checks for linker and compiler features on darwin m4_defun([_LT_DARWIN_LINKER_FEATURES], [ m4_require([_LT_REQUIRED_DARWIN_CHECKS]) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported if test "$lt_cv_ld_force_load" = "yes"; then _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) else _LT_TAGVAR(whole_archive_flag_spec, $1)='' fi _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=func_echo_all _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" m4_if([$1], [CXX], [ if test "$lt_cv_apple_cc_single_mod" != "yes"; then _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" fi ],[]) else _LT_TAGVAR(ld_shlibs, $1)=no fi ]) # _LT_SYS_MODULE_PATH_AIX([TAGNAME]) # ---------------------------------- # Links a minimal program and checks the executable # for the system default hardcoded library path. In most cases, # this is /usr/lib:/lib, but when the MPI compilers are used # the location of the communication and MPI libs are included too. # If we don't find anything, use the default library path according # to the aix ld manual. # Store the results from the different compilers for each TAGNAME. # Allow to override them for all tags through lt_cv_aix_libpath. m4_defun([_LT_SYS_MODULE_PATH_AIX], [m4_require([_LT_DECL_SED])dnl if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ lt_aix_libpath_sed='[ /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }]' _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi],[]) if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" fi ]) aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) fi ])# _LT_SYS_MODULE_PATH_AIX # _LT_SHELL_INIT(ARG) # ------------------- m4_define([_LT_SHELL_INIT], [m4_divert_text([M4SH-INIT], [$1 ])])# _LT_SHELL_INIT # _LT_PROG_ECHO_BACKSLASH # ----------------------- # Find how we can fake an echo command that does not interpret backslash. # In particular, with Autoconf 2.60 or later we add some code to the start # of the generated configure script which will find a shell with a builtin # printf (which we can use as an echo command). m4_defun([_LT_PROG_ECHO_BACKSLASH], [ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO AC_MSG_CHECKING([how to print strings]) # Test print first, because it will be a builtin if present. if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='print -r --' elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='printf %s\n' else # Use this function as a fallback that always works. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $[]1 _LTECHO_EOF' } ECHO='func_fallback_echo' fi # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "$*" } case "$ECHO" in printf*) AC_MSG_RESULT([printf]) ;; print*) AC_MSG_RESULT([print -r]) ;; *) AC_MSG_RESULT([cat]) ;; esac m4_ifdef([_AS_DETECT_SUGGESTED], [_AS_DETECT_SUGGESTED([ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO PATH=/empty FPATH=/empty; export PATH FPATH test "X`printf %s $ECHO`" = "X$ECHO" \ || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) _LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) ])# _LT_PROG_ECHO_BACKSLASH # _LT_WITH_SYSROOT # ---------------- AC_DEFUN([_LT_WITH_SYSROOT], [AC_MSG_CHECKING([for sysroot]) AC_ARG_WITH([sysroot], [ --with-sysroot[=DIR] Search for dependent libraries within DIR (or the compiler's sysroot if not specified).], [], [with_sysroot=no]) dnl lt_sysroot will always be passed unquoted. We quote it here dnl in case the user passed a directory name. lt_sysroot= case ${with_sysroot} in #( yes) if test "$GCC" = yes; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( /*) lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` ;; #( no|'') ;; #( *) AC_MSG_RESULT([${with_sysroot}]) AC_MSG_ERROR([The sysroot must be an absolute path.]) ;; esac AC_MSG_RESULT([${lt_sysroot:-no}]) _LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl [dependent libraries, and in which our libraries should be installed.])]) # _LT_ENABLE_LOCK # --------------- m4_defun([_LT_ENABLE_LOCK], [AC_ARG_ENABLE([libtool-lock], [AS_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) case `/usr/bin/file conftest.o` in *x86-64*) LD="${LD-ld} -m elf32_x86_64" ;; *) LD="${LD-ld} -m elf_i386" ;; esac ;; powerpc64le-*) LD="${LD-ld} -m elf32lppclinux" ;; powerpc64-*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; powerpcle-*) LD="${LD-ld} -m elf64lppc" ;; powerpc-*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_PUSH(C) AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_POP]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; *-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) case $host in i?86-*-solaris*) LD="${LD-ld} -m elf_x86_64" ;; sparc*-*-solaris*) LD="${LD-ld} -m elf64_sparc" ;; esac # GNU ld 2.21 introduced _sol2 emulations. Use them if available. if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then LD="${LD-ld}_sol2" fi ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks="$enable_libtool_lock" ])# _LT_ENABLE_LOCK # _LT_PROG_AR # ----------- m4_defun([_LT_PROG_AR], [AC_CHECK_TOOLS(AR, [ar], false) : ${AR=ar} : ${AR_FLAGS=cru} _LT_DECL([], [AR], [1], [The archiver]) _LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], [lt_cv_ar_at_file=no AC_COMPILE_IFELSE([AC_LANG_PROGRAM], [echo conftest.$ac_objext > conftest.lst lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' AC_TRY_EVAL([lt_ar_try]) if test "$ac_status" -eq 0; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a AC_TRY_EVAL([lt_ar_try]) if test "$ac_status" -ne 0; then lt_cv_ar_at_file=@ fi fi rm -f conftest.* libconftest.a ]) ]) if test "x$lt_cv_ar_at_file" = xno; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file fi _LT_DECL([], [archiver_list_spec], [1], [How to feed a file listing to the archiver]) ])# _LT_PROG_AR # _LT_CMD_OLD_ARCHIVE # ------------------- m4_defun([_LT_CMD_OLD_ARCHIVE], [_LT_PROG_AR AC_CHECK_TOOL(STRIP, strip, :) test -z "$STRIP" && STRIP=: _LT_DECL([], [STRIP], [1], [A symbol stripping program]) AC_CHECK_TOOL(RANLIB, ranlib, :) test -z "$RANLIB" && RANLIB=: _LT_DECL([], [RANLIB], [1], [Commands used to install an old-style archive]) # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" fi case $host_os in darwin*) lock_old_archive_extraction=yes ;; *) lock_old_archive_extraction=no ;; esac _LT_DECL([], [old_postinstall_cmds], [2]) _LT_DECL([], [old_postuninstall_cmds], [2]) _LT_TAGDECL([], [old_archive_cmds], [2], [Commands used to build an old-style archive]) _LT_DECL([], [lock_old_archive_extraction], [0], [Whether to use a lock for old archive extraction]) ])# _LT_CMD_OLD_ARCHIVE # _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------------------- # Check whether the given compiler option works AC_DEFUN([_LT_COMPILER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$3" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi fi $RM conftest* ]) if test x"[$]$2" = xyes; then m4_if([$5], , :, [$5]) else m4_if([$6], , :, [$6]) fi ])# _LT_COMPILER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) # _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------- # Check whether the given linker option works AC_DEFUN([_LT_LINKER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $3" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi else $2=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" ]) if test x"[$]$2" = xyes; then m4_if([$4], , :, [$4]) else m4_if([$5], , :, [$5]) fi ])# _LT_LINKER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) # LT_CMD_MAX_LEN #--------------- AC_DEFUN([LT_CMD_MAX_LEN], [AC_REQUIRE([AC_CANONICAL_HOST])dnl # find the maximum length of command line arguments AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; mint*) # On MiNT this can take a long time and run out of memory. lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; os2*) # The test takes a long time on OS/2. lt_cv_sys_max_cmd_len=8192 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len" && \ test undefined != "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8 ; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac ]) if test -n $lt_cv_sys_max_cmd_len ; then AC_MSG_RESULT($lt_cv_sys_max_cmd_len) else AC_MSG_RESULT(none) fi max_cmd_len=$lt_cv_sys_max_cmd_len _LT_DECL([], [max_cmd_len], [0], [What is the maximum length of a command?]) ])# LT_CMD_MAX_LEN # Old name: AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) # _LT_HEADER_DLFCN # ---------------- m4_defun([_LT_HEADER_DLFCN], [AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl ])# _LT_HEADER_DLFCN # _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) # ---------------------------------------------------------------- m4_defun([_LT_TRY_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test "$cross_compiling" = yes; then : [$4] else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF [#line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; }] _LT_EOF if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; x$lt_dlneed_uscore) $2 ;; x$lt_dlunknown|x*) $3 ;; esac else : # compilation failed $3 fi fi rm -fr conftest* ])# _LT_TRY_DLOPEN_SELF # LT_SYS_DLOPEN_SELF # ------------------ AC_DEFUN([LT_SYS_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ]) ;; *) AC_CHECK_FUNC([shl_load], [lt_cv_dlopen="shl_load"], [AC_CHECK_LIB([dld], [shl_load], [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], [AC_CHECK_FUNC([dlopen], [lt_cv_dlopen="dlopen"], [AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [AC_CHECK_LIB([svld], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], [AC_CHECK_LIB([dld], [dld_link], [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) ]) ]) ]) ]) ]) ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" AC_CACHE_CHECK([whether a program can dlopen itself], lt_cv_dlopen_self, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ]) if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], lt_cv_dlopen_self_static, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ]) fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi _LT_DECL([dlopen_support], [enable_dlopen], [0], [Whether dlopen is supported]) _LT_DECL([dlopen_self], [enable_dlopen_self], [0], [Whether dlopen of programs is supported]) _LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], [Whether dlopen of statically linked programs is supported]) ])# LT_SYS_DLOPEN_SELF # Old name: AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) # _LT_COMPILER_C_O([TAGNAME]) # --------------------------- # Check to see if options -c and -o are simultaneously supported by compiler. # This macro does not hard code the compiler like AC_PROG_CC_C_O. m4_defun([_LT_COMPILER_C_O], [m4_require([_LT_DECL_SED])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi chmod u+w . 2>&AS_MESSAGE_LOG_FD $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* ]) _LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], [Does compiler simultaneously support -c and -o options?]) ])# _LT_COMPILER_C_O # _LT_COMPILER_FILE_LOCKS([TAGNAME]) # ---------------------------------- # Check to see if we can do hard links to lock some files if needed m4_defun([_LT_COMPILER_FILE_LOCKS], [m4_require([_LT_ENABLE_LOCK])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_COMPILER_C_O([$1]) hard_links="nottested" if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user AC_MSG_CHECKING([if we can lock with hard links]) hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no AC_MSG_RESULT([$hard_links]) if test "$hard_links" = no; then AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) need_locks=warn fi else need_locks=no fi _LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) ])# _LT_COMPILER_FILE_LOCKS # _LT_CHECK_OBJDIR # ---------------- m4_defun([_LT_CHECK_OBJDIR], [AC_CACHE_CHECK([for objdir], [lt_cv_objdir], [rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null]) objdir=$lt_cv_objdir _LT_DECL([], [objdir], [0], [The name of the directory that contains temporary libtool files])dnl m4_pattern_allow([LT_OBJDIR])dnl AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", [Define to the sub-directory in which libtool stores uninstalled libraries.]) ])# _LT_CHECK_OBJDIR # _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) # -------------------------------------- # Check hardcoding attributes. m4_defun([_LT_LINKER_HARDCODE_LIBPATH], [AC_MSG_CHECKING([how to hardcode library paths into programs]) _LT_TAGVAR(hardcode_action, $1)= if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || test -n "$_LT_TAGVAR(runpath_var, $1)" || test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then # We can hardcode non-existent directories. if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then # Linking always hardcodes the temporary library directory. _LT_TAGVAR(hardcode_action, $1)=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. _LT_TAGVAR(hardcode_action, $1)=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. _LT_TAGVAR(hardcode_action, $1)=unsupported fi AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi _LT_TAGDECL([], [hardcode_action], [0], [How to hardcode a shared library path into an executable]) ])# _LT_LINKER_HARDCODE_LIBPATH # _LT_CMD_STRIPLIB # ---------------- m4_defun([_LT_CMD_STRIPLIB], [m4_require([_LT_DECL_EGREP]) striplib= old_striplib= AC_MSG_CHECKING([whether stripping libraries is possible]) if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" AC_MSG_RESULT([yes]) else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) fi ;; *) AC_MSG_RESULT([no]) ;; esac fi _LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) _LT_DECL([], [striplib], [1]) ])# _LT_CMD_STRIPLIB # _LT_SYS_DYNAMIC_LINKER([TAG]) # ----------------------------- # PORTME Fill in your ld.so characteristics m4_defun([_LT_SYS_DYNAMIC_LINKER], [AC_REQUIRE([AC_CANONICAL_HOST])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_OBJDUMP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl AC_MSG_CHECKING([dynamic linker characteristics]) m4_if([$1], [], [ if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac case $host_os in mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; *) lt_sed_strip_eq="s,=/,/,g" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` ;; *) lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` ;; esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[[lt_foo]]++; } if (lt_freq[[lt_foo]] == 1) { print lt_foo; } }'` # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi]) library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[[4-9]]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[[01]] | aix4.[[01]].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[[45]]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' library_names_spec='${libname}.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec="$LIB" if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[[23]].*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[[01]]* | freebsdelf3.[[01]]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; haiku*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=yes sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[[3-9]]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], [lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], [lt_cv_shlibpath_overrides_runpath=yes])]) LDFLAGS=$save_LDFLAGS libdir=$save_libdir ]) shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[[89]] | openbsd2.[[89]].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac AC_MSG_RESULT([$dynamic_linker]) test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi _LT_DECL([], [variables_saved_for_relink], [1], [Variables whose values should be saved in libtool wrapper scripts and restored at link time]) _LT_DECL([], [need_lib_prefix], [0], [Do we need the "lib" prefix for modules?]) _LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) _LT_DECL([], [version_type], [0], [Library versioning type]) _LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) _LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) _LT_DECL([], [shlibpath_overrides_runpath], [0], [Is shlibpath searched before the hard-coded library search path?]) _LT_DECL([], [libname_spec], [1], [Format of library name prefix]) _LT_DECL([], [library_names_spec], [1], [[List of archive names. First name is the real one, the rest are links. The last name is the one that the linker finds with -lNAME]]) _LT_DECL([], [soname_spec], [1], [[The coded name of the library, if different from the real name]]) _LT_DECL([], [install_override_mode], [1], [Permission mode override for installation of shared libraries]) _LT_DECL([], [postinstall_cmds], [2], [Command to use after installation of a shared archive]) _LT_DECL([], [postuninstall_cmds], [2], [Command to use after uninstallation of a shared archive]) _LT_DECL([], [finish_cmds], [2], [Commands used to finish a libtool library installation in a directory]) _LT_DECL([], [finish_eval], [1], [[As "finish_cmds", except a single script fragment to be evaled but not shown]]) _LT_DECL([], [hardcode_into_libs], [0], [Whether we should hardcode library paths into libraries]) _LT_DECL([], [sys_lib_search_path_spec], [2], [Compile-time system search path for libraries]) _LT_DECL([], [sys_lib_dlsearch_path_spec], [2], [Run-time system search path for libraries]) ])# _LT_SYS_DYNAMIC_LINKER # _LT_PATH_TOOL_PREFIX(TOOL) # -------------------------- # find a file program which can recognize shared library AC_DEFUN([_LT_PATH_TOOL_PREFIX], [m4_require([_LT_DECL_EGREP])dnl AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in [[\\/*] | ?:[\\/]*]) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="m4_if([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$1; then lt_cv_path_MAGIC_CMD="$ac_dir/$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac]) MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi _LT_DECL([], [MAGIC_CMD], [0], [Used to examine libraries when file_magic_cmd begins with "file"])dnl ])# _LT_PATH_TOOL_PREFIX # Old name: AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) # _LT_PATH_MAGIC # -------------- # find a file program which can recognize a shared library m4_defun([_LT_PATH_MAGIC], [_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) else MAGIC_CMD=: fi fi ])# _LT_PATH_MAGIC # LT_PATH_LD # ---------- # find the pathname to the GNU or non-GNU linker AC_DEFUN([LT_PATH_LD], [AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_PROG_ECHO_BACKSLASH])dnl AC_ARG_WITH([gnu-ld], [AS_HELP_STRING([--with-gnu-ld], [assume the C compiler uses GNU ld @<:@default=no@:>@])], [test "$withval" = no || with_gnu_ld=yes], [with_gnu_ld=no])dnl ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by $CC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]]* | ?:[[\\/]]*) re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else # Keep this pattern in sync with the one in func_win32_libid. lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc*) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; haiku*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[[3-9]]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; esac ]) file_magic_glob= want_nocaseglob=no if test "$build" = "$host"; then case $host_os in mingw* | pw32*) if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then want_nocaseglob=yes else file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` fi ;; esac fi file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown _LT_DECL([], [deplibs_check_method], [1], [Method to check whether dependent libraries are shared objects]) _LT_DECL([], [file_magic_cmd], [1], [Command to use when deplibs_check_method = "file_magic"]) _LT_DECL([], [file_magic_glob], [1], [How to find potential files when deplibs_check_method = "file_magic"]) _LT_DECL([], [want_nocaseglob], [1], [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) ])# _LT_CHECK_MAGIC_METHOD # LT_PATH_NM # ---------- # find the pathname to a BSD- or MS-compatible name lister AC_DEFUN([LT_PATH_NM], [AC_REQUIRE([AC_PROG_CC])dnl AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done : ${lt_cv_path_NM=no} fi]) if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : # Let the user override the test. else AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in *COFF*) DUMPBIN="$DUMPBIN -symbols" ;; *) DUMPBIN=: ;; esac fi AC_SUBST([DUMPBIN]) if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" fi fi test -z "$NM" && NM=nm AC_SUBST([NM]) _LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], [lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) cat conftest.out >&AS_MESSAGE_LOG_FD if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest*]) ])# LT_PATH_NM # Old names: AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_PROG_NM], []) dnl AC_DEFUN([AC_PROG_NM], []) # _LT_CHECK_SHAREDLIB_FROM_LINKLIB # -------------------------------- # how to determine the name of the shared library # associated with a specific link library. # -- PORTME fill in with the dynamic library characteristics m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], [m4_require([_LT_DECL_EGREP]) m4_require([_LT_DECL_OBJDUMP]) m4_require([_LT_DECL_DLLTOOL]) AC_CACHE_CHECK([how to associate runtime and link libraries], lt_cv_sharedlib_from_linklib_cmd, [lt_cv_sharedlib_from_linklib_cmd='unknown' case $host_os in cygwin* | mingw* | pw32* | cegcc*) # two different shell functions defined in ltmain.sh # decide which to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ;; *) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ;; esac ;; *) # fallback: assume linklib IS sharedlib lt_cv_sharedlib_from_linklib_cmd="$ECHO" ;; esac ]) sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO _LT_DECL([], [sharedlib_from_linklib_cmd], [1], [Command to associate shared and link libraries]) ])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB # _LT_PATH_MANIFEST_TOOL # ---------------------- # locate the manifest tool m4_defun([_LT_PATH_MANIFEST_TOOL], [AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], [lt_cv_path_mainfest_tool=no echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out cat conftest.err >&AS_MESSAGE_LOG_FD if $GREP 'Manifest Tool' conftest.out > /dev/null; then lt_cv_path_mainfest_tool=yes fi rm -f conftest*]) if test "x$lt_cv_path_mainfest_tool" != xyes; then MANIFEST_TOOL=: fi _LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl ])# _LT_PATH_MANIFEST_TOOL # LT_LIB_M # -------- # check for math library AC_DEFUN([LT_LIB_M], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, cos, LIBM="-lm") ;; esac AC_SUBST([LIBM]) ])# LT_LIB_M # Old name: AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_CHECK_LIBM], []) # _LT_COMPILER_NO_RTTI([TAGNAME]) # ------------------------------- m4_defun([_LT_COMPILER_NO_RTTI], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= if test "$GCC" = yes; then case $cc_basename in nvcc*) _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; *) _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; esac _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], lt_cv_prog_compiler_rtti_exceptions, [-fno-rtti -fno-exceptions], [], [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) fi _LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], [Compiler flag to turn off builtin functions]) ])# _LT_COMPILER_NO_RTTI # _LT_CMD_GLOBAL_SYMBOLS # ---------------------- m4_defun([_LT_CMD_GLOBAL_SYMBOLS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([LT_PATH_NM])dnl AC_REQUIRE([LT_PATH_LD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_TAG_COMPILER])dnl # Check for command to grab the raw symbol name followed by C symbol from nm. AC_MSG_CHECKING([command to parse $NM output from $compiler object]) AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [ # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[[BCDEGRST]]' # Regexp to match symbols that can be accessed directly from C. sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[[BCDT]]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[[ABCDGISTW]]' ;; hpux*) if test "$host_cpu" = ia64; then symcode='[[ABCDEGRST]]' fi ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; osf*) symcode='[[BCDEGQRST]]' ;; solaris*) symcode='[[BDRT]]' ;; sco3.2v5*) symcode='[[DT]]' ;; sysv4.2uw2*) symcode='[[DT]]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[[ABDT]]' ;; sysv4) symcode='[[DFNSTU]]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[[ABCDGIRSTW]]' ;; esac # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function # and D for any global variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK ['"\ " {last_section=section; section=\$ 3};"\ " /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ " {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ " s[1]~/^[@?]/{print s[1], s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx]" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if AC_TRY_EVAL(ac_compile); then # Now try to grab the symbols. nlist=conftest.nm if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT@&t@_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT@&t@_DLSYM_CONST #else # define LT@&t@_DLSYM_CONST const #endif #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ LT@&t@_DLSYM_CONST struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[[]] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD fi else echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done ]) if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then AC_MSG_RESULT(failed) else AC_MSG_RESULT(ok) fi # Response file support. if test "$lt_cv_nm_interface" = "MS dumpbin"; then nm_file_list_spec='@' elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then nm_file_list_spec='@' fi _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], [Take the output of nm and produce a listing of raw symbols and C names]) _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], [Transform the output of nm in a proper C declaration]) _LT_DECL([global_symbol_to_c_name_address], [lt_cv_sys_global_symbol_to_c_name_address], [1], [Transform the output of nm in a C name address pair]) _LT_DECL([global_symbol_to_c_name_address_lib_prefix], [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], [Transform the output of nm in a C name address pair when lib prefix is needed]) _LT_DECL([], [nm_file_list_spec], [1], [Specify filename containing input files for $NM]) ]) # _LT_CMD_GLOBAL_SYMBOLS # _LT_COMPILER_PIC([TAGNAME]) # --------------------------- m4_defun([_LT_COMPILER_PIC], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_wl, $1)= _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)= m4_if([$1], [CXX], [ # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. _LT_TAGVAR(lt_prog_compiler_static, $1)= ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else case $host_os in aix[[4-9]]*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; dgux*) case $cc_basename in ec++*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; ghcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; aCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # KAI C++ Compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; ecpc* ) # old Intel C++ for x86_64 which still supported -KPIC. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; icpc* ) # Intel C++, used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; pgCC* | pgcpp*) # Portland Group C++ compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL 8.0, 9.0 on PPC and BlueGene _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ;; *) ;; esac ;; netbsd* | netbsdelf*-gnu) ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; cxx*) # Digital/Compaq C++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; lcc*) # Lucid _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; *) ;; esac ;; vxworks*) ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ], [ if test "$GCC" = yes; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. _LT_TAGVAR(lt_prog_compiler_static, $1)= ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac case $cc_basename in nvcc*) # Cuda Compiler Driver 2.2 _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" fi ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; hpux9* | hpux10* | hpux11*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC (with -KPIC) is the default. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # Lahey Fortran 8.1. lf95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' ;; nagfor*) # NAG Fortran compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; ccc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All Alpha code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xl* | bgxl* | bgf* | mpixl*) # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) # Sun Fortran 8.3 passes all unrecognized flags to the linker _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='' ;; *Sun\ F* | *Sun*Fortran*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; *Intel*\ [[CF]]*Compiler*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; *Portland\ Group*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; esac ;; newsos6) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All OSF/1 code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; rdos*) _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; solaris*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' case $cc_basename in f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; *) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; esac ;; sunos4*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; unicos*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; uts4*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ]) case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" ;; esac AC_CACHE_CHECK([for $compiler option to produce PIC], [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) _LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) # # Check to make sure the PIC flag actually works. # if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in "" | " "*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; esac], [_LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) fi _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], [Additional compiler flags for building library objects]) _LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], [How to pass a linker flag through the compiler]) # # Check to make sure the static flag actually works. # wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" _LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), $lt_tmp_static_flag, [], [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) _LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], [Compiler flag to prevent dynamic linking]) ])# _LT_COMPILER_PIC # _LT_LINKER_SHLIBS([TAGNAME]) # ---------------------------- # See if the linker supports building shared libraries. m4_defun([_LT_LINKER_SHLIBS], [AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl m4_require([_LT_PATH_MANIFEST_TOOL])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) m4_if([$1], [CXX], [ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] case $host_os in aix[[4-9]]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global defined # symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ;; cygwin* | mingw* | cegcc*) case $cc_basename in cl*) _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] ;; esac ;; linux* | k*bsd*-gnu | gnu*) _LT_TAGVAR(link_all_deplibs, $1)=no ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac ], [ runpath_var= _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_cmds, $1)= _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(old_archive_from_new_cmds, $1)= _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= _LT_TAGVAR(thread_safe_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list _LT_TAGVAR(include_expsyms, $1)= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. dnl Note also adjust exclude_expsyms for C++ above. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; linux* | k*bsd*-gnu | gnu*) _LT_TAGVAR(link_all_deplibs, $1)=no ;; esac _LT_TAGVAR(ld_shlibs, $1)=yes # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility # with the native linker. However, as the warning in the GNU ld # block says, versions before 2.19.5* couldn't really create working # shared libraries, regardless of the interface used. case `$LD -v 2>&1` in *\ \(GNU\ Binutils\)\ 2.19.5*) ;; *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; *) lt_use_gnu_ld_interface=yes ;; esac ;; *) lt_use_gnu_ld_interface=yes ;; esac fi if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi supports_anon_versioning=no case `$LD -v 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[[3-9]]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.19, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to install binutils *** 2.20 or above, or modify your PATH so that a non-GNU linker is found. *** You will then need to restart the configuration process. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 _LT_TAGVAR(whole_archive_flag_spec, $1)= tmp_sharedflag='--shared' ;; xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi case $cc_basename in xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; sunos4*) _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then runpath_var= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. _LT_TAGVAR(hardcode_minus_L, $1)=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. _LT_TAGVAR(hardcode_direct, $1)=unsupported fi ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global # defined symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' if test "$GCC" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi _LT_TAGVAR(link_all_deplibs, $1)=no else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; bsdi[[45]]*) _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in cl*) # Native MSVC _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(file_list_spec, $1)='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # Assume MSVC wrapper _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' # FIXME: Should let the user specify the lib program. _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; esac ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; dgux*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2.*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; hpux9*) if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; hpux10*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes fi ;; hpux11*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) m4_if($1, [], [ # Older versions of the 11.00 compiler do not understand -b yet # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) _LT_LINKER_OPTION([if $CC understands -b], _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) ;; esac fi if test "$with_gnu_ld" = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. # This should be the same for all languages, so no per-tag cache variable. AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], [lt_cv_irix_exported_symbol], [save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" AC_LINK_IFELSE( [AC_LANG_SOURCE( [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], [C++], [[int foo (void) { return 0; }]], [Fortran 77], [[ subroutine foo end]], [Fortran], [[ subroutine foo end]])])], [lt_cv_irix_exported_symbol=yes], [lt_cv_irix_exported_symbol=no]) LDFLAGS="$save_LDFLAGS"]) if test "$lt_cv_irix_exported_symbol" = yes; then _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' fi else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes _LT_TAGVAR(link_all_deplibs, $1)=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; newsos6) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *nto* | *qnx*) ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' else case $host_os in openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ;; esac fi else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; os2*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; solaris*) _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='${wl}' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' fi ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4) case $host_vendor in sni) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' _LT_TAGVAR(hardcode_direct, $1)=no ;; motorola) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4.3*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes _LT_TAGVAR(ld_shlibs, $1)=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(ld_shlibs, $1)=no ;; esac if test x$host_vendor = xsni; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' ;; esac fi fi ]) AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld _LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl _LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl _LT_DECL([], [extract_expsyms_cmds], [2], [The commands to extract the exported symbol list from a shared archive]) # # Do we need to explicitly link libc? # case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in x|xyes) # Assume -lc should be added _LT_TAGVAR(archive_cmds_need_lc, $1)=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $_LT_TAGVAR(archive_cmds, $1) in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. AC_CACHE_CHECK([whether -lc should be explicitly linked in], [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), [$RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if AC_TRY_EVAL(ac_compile) 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) _LT_TAGVAR(allow_undefined_flag, $1)= if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) then lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no else lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes fi _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* ]) _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) ;; esac fi ;; esac _LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], [Whether or not to add -lc for building shared libraries]) _LT_TAGDECL([allow_libtool_libs_with_static_runtimes], [enable_shared_with_static_runtimes], [0], [Whether or not to disallow shared libs when runtime libs are static]) _LT_TAGDECL([], [export_dynamic_flag_spec], [1], [Compiler flag to allow reflexive dlopens]) _LT_TAGDECL([], [whole_archive_flag_spec], [1], [Compiler flag to generate shared objects directly from archives]) _LT_TAGDECL([], [compiler_needs_object], [1], [Whether the compiler copes with passing no objects directly]) _LT_TAGDECL([], [old_archive_from_new_cmds], [2], [Create an old-style archive from a shared archive]) _LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], [Create a temporary old-style archive to link instead of a shared archive]) _LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) _LT_TAGDECL([], [archive_expsym_cmds], [2]) _LT_TAGDECL([], [module_cmds], [2], [Commands used to build a loadable module if different from building a shared archive.]) _LT_TAGDECL([], [module_expsym_cmds], [2]) _LT_TAGDECL([], [with_gnu_ld], [1], [Whether we are building with GNU ld or not]) _LT_TAGDECL([], [allow_undefined_flag], [1], [Flag that allows shared libraries with undefined symbols to be built]) _LT_TAGDECL([], [no_undefined_flag], [1], [Flag that enforces no undefined symbols]) _LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], [Flag to hardcode $libdir into a binary during linking. This must work even if $libdir does not exist]) _LT_TAGDECL([], [hardcode_libdir_separator], [1], [Whether we need a single "-rpath" flag with a separated argument]) _LT_TAGDECL([], [hardcode_direct], [0], [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_direct_absolute], [0], [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the resulting binary and the resulting library dependency is "absolute", i.e impossible to change by setting ${shlibpath_var} if the library is relocated]) _LT_TAGDECL([], [hardcode_minus_L], [0], [Set to "yes" if using the -LDIR flag during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_shlibpath_var], [0], [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_automatic], [0], [Set to "yes" if building a shared library automatically hardcodes DIR into the library and all subsequent libraries and executables linked against it]) _LT_TAGDECL([], [inherit_rpath], [0], [Set to yes if linker adds runtime paths of dependent libraries to runtime path list]) _LT_TAGDECL([], [link_all_deplibs], [0], [Whether libtool must link a program against all its dependency libraries]) _LT_TAGDECL([], [always_export_symbols], [0], [Set to "yes" if exported symbols are required]) _LT_TAGDECL([], [export_symbols_cmds], [2], [The commands to list exported symbols]) _LT_TAGDECL([], [exclude_expsyms], [1], [Symbols that should not be listed in the preloaded symbols]) _LT_TAGDECL([], [include_expsyms], [1], [Symbols that must always be exported]) _LT_TAGDECL([], [prelink_cmds], [2], [Commands necessary for linking programs (against libraries) with templates]) _LT_TAGDECL([], [postlink_cmds], [2], [Commands necessary for finishing linking programs]) _LT_TAGDECL([], [file_list_spec], [1], [Specify filename containing input files]) dnl FIXME: Not yet implemented dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], dnl [Compiler flag to generate thread safe objects]) ])# _LT_LINKER_SHLIBS # _LT_LANG_C_CONFIG([TAG]) # ------------------------ # Ensure that the configuration variables for a C compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to `libtool'. m4_defun([_LT_LANG_C_CONFIG], [m4_require([_LT_DECL_EGREP])dnl lt_save_CC="$CC" AC_LANG_PUSH(C) # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' _LT_TAG_COMPILER # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) LT_SYS_DLOPEN_SELF _LT_CMD_STRIPLIB # Report which library types will actually be built AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_CONFIG($1) fi AC_LANG_POP CC="$lt_save_CC" ])# _LT_LANG_C_CONFIG # _LT_LANG_CXX_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a C++ compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to `libtool'. m4_defun([_LT_LANG_CXX_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_PATH_MANIFEST_TOOL])dnl if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then AC_PROG_CXXCPP else _lt_caught_CXX_error=yes fi AC_LANG_PUSH(C++) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the CXX compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_caught_CXX_error" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} CFLAGS=$CXXFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then # We don't want -fno-exception when compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' else _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration LT_PATH_LD # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) _LT_TAGVAR(ld_shlibs, $1)=yes case $host_os in aix3*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' if test "$GXX" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to # export. _LT_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty # executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared # libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; cygwin* | mingw* | pw32* | cegcc*) case $GXX,$cc_basename in ,cl* | no,cl*) # Native MSVC # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(file_list_spec, $1)='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ func_to_tool_file "$lt_outputfile"~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # g++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; freebsd2.*) # C++ shared libraries reported to be fairly broken before # switch to ELF _LT_TAGVAR(ld_shlibs, $1)=no ;; freebsd-elf*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions _LT_TAGVAR(ld_shlibs, $1)=yes ;; haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; hpux9*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) ;; *) _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' fi fi _LT_TAGVAR(link_all_deplibs, $1)=yes ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc* | ecpc* ) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; esac _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ $RANLIB $oldlib' _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; *) # Version 6 and above use weak symbols _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' ;; xl* | mpixl* | bgxl*) # IBM XL 8.0 on PPC, with GNU ld _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; m88k*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; *nto* | *qnx*) _LT_TAGVAR(ld_shlibs, $1)=yes ;; openbsd2*) # C++ shared libraries are fairly broken _LT_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi output_verbose_link_cmd=func_echo_all else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # the KAI C++ compiler. case $host in osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; esac ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; cxx*) case $host in osf3*) _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ;; *) _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ $RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ;; esac _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' case $host in osf3*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ '"$_LT_TAGVAR(old_archive_cmds, $1)" _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ '"$_LT_TAGVAR(reload_cmds, $1)" ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_TAGVAR(GCC, $1)="$GXX" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld fi # test "$_lt_caught_CXX_error" != yes AC_LANG_POP ])# _LT_LANG_CXX_CONFIG # _LT_FUNC_STRIPNAME_CNF # ---------------------- # func_stripname_cnf prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # # This function is identical to the (non-XSI) version of func_stripname, # except this one can be used by m4 code that may be executed by configure, # rather than the libtool script. m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl AC_REQUIRE([_LT_DECL_SED]) AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) func_stripname_cnf () { case ${2} in .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; esac } # func_stripname_cnf ])# _LT_FUNC_STRIPNAME_CNF # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) # --------------------------------- # Figure out "hidden" library dependencies from verbose # compiler output when linking a shared library. # Parse the compiler output and extract the necessary # objects, libraries and library flags. m4_defun([_LT_SYS_HIDDEN_LIBDEPS], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl # Dependencies to place before and after the object being linked: _LT_TAGVAR(predep_objects, $1)= _LT_TAGVAR(postdep_objects, $1)= _LT_TAGVAR(predeps, $1)= _LT_TAGVAR(postdeps, $1)= _LT_TAGVAR(compiler_lib_search_path, $1)= dnl we can't use the lt_simple_compile_test_code here, dnl because it contains code intended for an executable, dnl not a library. It's possible we should let each dnl tag define a new lt_????_link_test_code variable, dnl but it's only used here... m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF int a; void foo (void) { a = 0; } _LT_EOF ], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF class Foo { public: Foo (void) { a = 0; } private: int a; }; _LT_EOF ], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer*4 a a=0 return end _LT_EOF ], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer a a=0 return end _LT_EOF ], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF public class foo { private int a; public void bar (void) { a = 0; } }; _LT_EOF ], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF package foo func foo() { } _LT_EOF ]) _lt_libdeps_save_CFLAGS=$CFLAGS case "$CC $CFLAGS " in #( *\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; *\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; *\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; esac dnl Parse the compiler output and extract the necessary dnl objects, libraries and library flags. if AC_TRY_EVAL(ac_compile); then # Parse the compiler output and extract the necessary # objects, libraries and library flags. # Sentinel used to keep track of whether or not we are before # the conftest object file. pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do case ${prev}${p} in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. if test $p = "-L" || test $p = "-R"; then prev=$p continue fi # Expand the sysroot to ease extracting the directories later. if test -z "$prev"; then case $p in -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; esac fi case $p in =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; esac if test "$pre_test_object_deps_done" = no; then case ${prev} in -L | -R) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" else _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" fi ;; # The "-l" case would never come before the object being # linked, so don't bother handling this case. esac else if test -z "$_LT_TAGVAR(postdeps, $1)"; then _LT_TAGVAR(postdeps, $1)="${prev}${p}" else _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" fi fi prev= ;; *.lto.$objext) ;; # Ignore GCC LTO objects *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then pre_test_object_deps_done=yes continue fi if test "$pre_test_object_deps_done" = no; then if test -z "$_LT_TAGVAR(predep_objects, $1)"; then _LT_TAGVAR(predep_objects, $1)="$p" else _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" fi else if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then _LT_TAGVAR(postdep_objects, $1)="$p" else _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" fi fi ;; *) ;; # Ignore the rest. esac done # Clean up. rm -f a.out a.exe else echo "libtool.m4: error: problem compiling $1 test program" fi $RM -f confest.$objext CFLAGS=$_lt_libdeps_save_CFLAGS # PORTME: override above test on systems where it is broken m4_if([$1], [CXX], [case $host_os in interix[[3-9]]*) # Interix 3.5 installs completely hosed .la files for C++, so rather than # hack all around it, let's just trust "g++" to DTRT. _LT_TAGVAR(predep_objects,$1)= _LT_TAGVAR(postdep_objects,$1)= _LT_TAGVAR(postdeps,$1)= ;; linux*) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac if test "$solaris_use_stlport4" != yes; then _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac # Adding this requires a known-good setup of shared libraries for # Sun compiler versions before 5.6, else PIC objects from an old # archive will be linked into the output, leading to subtle bugs. if test "$solaris_use_stlport4" != yes; then _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; esac ]) case " $_LT_TAGVAR(postdeps, $1) " in *" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; esac _LT_TAGVAR(compiler_lib_search_dirs, $1)= if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` fi _LT_TAGDECL([], [compiler_lib_search_dirs], [1], [The directories searched by this compiler when creating a shared library]) _LT_TAGDECL([], [predep_objects], [1], [Dependencies to place before and after the objects being linked to create a shared library]) _LT_TAGDECL([], [postdep_objects], [1]) _LT_TAGDECL([], [predeps], [1]) _LT_TAGDECL([], [postdeps], [1]) _LT_TAGDECL([], [compiler_lib_search_path], [1], [The library search path used internally by the compiler when linking a shared library]) ])# _LT_SYS_HIDDEN_LIBDEPS # _LT_LANG_F77_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a Fortran 77 compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_F77_CONFIG], [AC_LANG_PUSH(Fortran 77) if test -z "$F77" || test "X$F77" = "Xno"; then _lt_disable_F77=yes fi _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for f77 test sources. ac_ext=f # Object file extension for compiled f77 test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the F77 compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_disable_F77" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${F77-"f77"} CFLAGS=$FFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) GCC=$G77 if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)="$G77" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC="$lt_save_CC" CFLAGS="$lt_save_CFLAGS" fi # test "$_lt_disable_F77" != yes AC_LANG_POP ])# _LT_LANG_F77_CONFIG # _LT_LANG_FC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for a Fortran compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_FC_CONFIG], [AC_LANG_PUSH(Fortran) if test -z "$FC" || test "X$FC" = "Xno"; then _lt_disable_FC=yes fi _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for fc test sources. ac_ext=${ac_fc_srcext-f} # Object file extension for compiled fc test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the FC compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_disable_FC" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${FC-"f95"} CFLAGS=$FCFLAGS compiler=$CC GCC=$ac_cv_fc_compiler_gnu _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS fi # test "$_lt_disable_FC" != yes AC_LANG_POP ])# _LT_LANG_FC_CONFIG # _LT_LANG_GCJ_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for the GNU Java Compiler compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_GCJ_CONFIG], [AC_REQUIRE([LT_PROG_GCJ])dnl AC_LANG_SAVE # Source file extension for Java test sources. ac_ext=java # Object file extension for compiled Java test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="class foo {}" # Code to be used in simple link tests lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC=yes CC=${GCJ-"gcj"} CFLAGS=$GCJFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_TAGVAR(LD, $1)="$LD" _LT_CC_BASENAME([$compiler]) # GCJ did not exist at the time GCC didn't implicitly link libc in. _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi AC_LANG_RESTORE GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_GCJ_CONFIG # _LT_LANG_GO_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for the GNU Go compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_GO_CONFIG], [AC_REQUIRE([LT_PROG_GO])dnl AC_LANG_SAVE # Source file extension for Go test sources. ac_ext=go # Object file extension for compiled Go test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="package main; func main() { }" # Code to be used in simple link tests lt_simple_link_test_code='package main; func main() { }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC=yes CC=${GOC-"gccgo"} CFLAGS=$GOFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_TAGVAR(LD, $1)="$LD" _LT_CC_BASENAME([$compiler]) # Go did not exist at the time GCC didn't implicitly link libc in. _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi AC_LANG_RESTORE GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_GO_CONFIG # _LT_LANG_RC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for the Windows resource compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_RC_CONFIG], [AC_REQUIRE([LT_PROG_RC])dnl AC_LANG_SAVE # Source file extension for RC test sources. ac_ext=rc # Object file extension for compiled RC test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' # Code to be used in simple link tests lt_simple_link_test_code="$lt_simple_compile_test_code" # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC= CC=${RC-"windres"} CFLAGS= compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes if test -n "$compiler"; then : _LT_CONFIG($1) fi GCC=$lt_save_GCC AC_LANG_RESTORE CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_RC_CONFIG # LT_PROG_GCJ # ----------- AC_DEFUN([LT_PROG_GCJ], [m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj,) test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS)])])[]dnl ]) # Old name: AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_GCJ], []) # LT_PROG_GO # ---------- AC_DEFUN([LT_PROG_GO], [AC_CHECK_TOOL(GOC, gccgo,) ]) # LT_PROG_RC # ---------- AC_DEFUN([LT_PROG_RC], [AC_CHECK_TOOL(RC, windres,) ]) # Old name: AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_RC], []) # _LT_DECL_EGREP # -------------- # If we don't have a new enough Autoconf to choose the best grep # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_EGREP], [AC_REQUIRE([AC_PROG_EGREP])dnl AC_REQUIRE([AC_PROG_FGREP])dnl test -z "$GREP" && GREP=grep _LT_DECL([], [GREP], [1], [A grep program that handles long lines]) _LT_DECL([], [EGREP], [1], [An ERE matcher]) _LT_DECL([], [FGREP], [1], [A literal string matcher]) dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too AC_SUBST([GREP]) ]) # _LT_DECL_OBJDUMP # -------------- # If we don't have a new enough Autoconf to choose the best objdump # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_OBJDUMP], [AC_CHECK_TOOL(OBJDUMP, objdump, false) test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) AC_SUBST([OBJDUMP]) ]) # _LT_DECL_DLLTOOL # ---------------- # Ensure DLLTOOL variable is set. m4_defun([_LT_DECL_DLLTOOL], [AC_CHECK_TOOL(DLLTOOL, dlltool, false) test -z "$DLLTOOL" && DLLTOOL=dlltool _LT_DECL([], [DLLTOOL], [1], [DLL creation program]) AC_SUBST([DLLTOOL]) ]) # _LT_DECL_SED # ------------ # Check for a fully-functional sed program, that truncates # as few characters as possible. Prefer GNU sed if found. m4_defun([_LT_DECL_SED], [AC_PROG_SED test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" _LT_DECL([], [SED], [1], [A sed program that does not truncate output]) _LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], [Sed that helps us avoid accidentally triggering echo(1) options like -n]) ])# _LT_DECL_SED m4_ifndef([AC_PROG_SED], [ ############################################################ # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_SED. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # ############################################################ m4_defun([AC_PROG_SED], [AC_MSG_CHECKING([for a sed that does not truncate output]) AC_CACHE_VAL(lt_cv_path_SED, [# Loop through the user's path and test for sed and gsed. # Then use that list of sed's as ones to test for truncation. as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for lt_ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" fi done done done IFS=$as_save_IFS lt_ac_max=0 lt_ac_count=0 # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do test ! -f $lt_ac_sed && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in # Check for GNU sed and select it if it is found. if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then lt_cv_path_SED=$lt_ac_sed break fi while true; do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo >>conftest.nl $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break cmp -s conftest.out conftest.nl || break # 10000 chars as input seems more than enough test $lt_ac_count -gt 10 && break lt_ac_count=`expr $lt_ac_count + 1` if test $lt_ac_count -gt $lt_ac_max; then lt_ac_max=$lt_ac_count lt_cv_path_SED=$lt_ac_sed fi done done ]) SED=$lt_cv_path_SED AC_SUBST([SED]) AC_MSG_RESULT([$SED]) ])#AC_PROG_SED ])#m4_ifndef # Old name: AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_SED], []) # _LT_CHECK_SHELL_FEATURES # ------------------------ # Find out whether the shell is Bourne or XSI compatible, # or has some other useful features. m4_defun([_LT_CHECK_SHELL_FEATURES], [AC_MSG_CHECKING([whether the shell understands some XSI constructs]) # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ = c,a/b,b/c, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes AC_MSG_RESULT([$xsi_shell]) _LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) AC_MSG_CHECKING([whether the shell understands "+="]) lt_shell_append=no ( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes AC_MSG_RESULT([$lt_shell_append]) _LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi _LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac _LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl _LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl ])# _LT_CHECK_SHELL_FEATURES # _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) # ------------------------------------------------------ # In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and # '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. m4_defun([_LT_PROG_FUNCTION_REPLACE], [dnl { sed -e '/^$1 ()$/,/^} # $1 /c\ $1 ()\ {\ m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) } # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: ]) # _LT_PROG_REPLACE_SHELLFNS # ------------------------- # Replace existing portable implementations of several shell functions with # equivalent extended shell implementations where those features are available.. m4_defun([_LT_PROG_REPLACE_SHELLFNS], [if test x"$xsi_shell" = xyes; then _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac]) _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl func_basename_result="${1##*/}"]) _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac func_basename_result="${1##*/}"]) _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are # positional parameters, so assign one to ordinary parameter first. func_stripname_result=${3} func_stripname_result=${func_stripname_result#"${1}"} func_stripname_result=${func_stripname_result%"${2}"}]) _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl func_split_long_opt_name=${1%%=*} func_split_long_opt_arg=${1#*=}]) _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl func_split_short_opt_arg=${1#??} func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl case ${1} in *.lo) func_lo2o_result=${1%.lo}.${objext} ;; *) func_lo2o_result=${1} ;; esac]) _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) fi if test x"$lt_shell_append" = xyes; then _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl func_quote_for_eval "${2}" dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) # Save a `func_append' function call where possible by direct use of '+=' sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: else # Save a `func_append' function call even when '+=' is not available sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$_lt_function_replace_fail" = x":"; then AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) fi ]) # _LT_PATH_CONVERSION_FUNCTIONS # ----------------------------- # Determine which file name conversion functions should be used by # func_to_host_file (and, implicitly, by func_to_host_path). These are needed # for certain cross-compile configurations and native mingw. m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_MSG_CHECKING([how to convert $build file names to $host format]) AC_CACHE_VAL(lt_cv_to_host_file_cmd, [case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ;; esac ;; *-*-cygwin* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_noop ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ;; esac ;; * ) # unhandled hosts (and "normal" native builds) lt_cv_to_host_file_cmd=func_convert_file_noop ;; esac ]) to_host_file_cmd=$lt_cv_to_host_file_cmd AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) _LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], [0], [convert $build file names to $host format])dnl AC_MSG_CHECKING([how to convert $build file names to toolchain format]) AC_CACHE_VAL(lt_cv_to_tool_file_cmd, [#assume ordinary cross tools, or native build. lt_cv_to_tool_file_cmd=func_convert_file_noop case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ;; esac ;; esac ]) to_tool_file_cmd=$lt_cv_to_tool_file_cmd AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) _LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], [0], [convert $build files to toolchain format])dnl ])# _LT_PATH_CONVERSION_FUNCTIONS parlatype-1.5.4/libparlatype/m4/lt~obsolete.m40000644000175000017500000001375613167645057016321 00000000000000# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- # # Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004. # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 5 lt~obsolete.m4 # These exist entirely to fool aclocal when bootstrapping libtool. # # In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) # which have later been changed to m4_define as they aren't part of the # exported API, or moved to Autoconf or Automake where they belong. # # The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN # in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us # using a macro with the same name in our local m4/libtool.m4 it'll # pull the old libtool.m4 in (it doesn't see our shiny new m4_define # and doesn't know about Autoconf macros at all.) # # So we provide this file, which has a silly filename so it's always # included after everything else. This provides aclocal with the # AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything # because those macros already exist, or will be overwritten later. # We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. # # Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. # Yes, that means every name once taken will need to remain here until # we give up compatibility with versions before 1.7, at which point # we need to keep only those names which we still refer to. # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) parlatype-1.5.4/libparlatype/m4/gtk-doc.m40000644000175000017500000000631213167645026015261 00000000000000dnl -*- mode: autoconf -*- # serial 2 dnl Usage: dnl GTK_DOC_CHECK([minimum-gtk-doc-version]) AC_DEFUN([GTK_DOC_CHECK], [ AC_REQUIRE([PKG_PROG_PKG_CONFIG]) AC_BEFORE([AC_PROG_LIBTOOL],[$0])dnl setup libtool first AC_BEFORE([AM_PROG_LIBTOOL],[$0])dnl setup libtool first ifelse([$1],[],[gtk_doc_requires="gtk-doc"],[gtk_doc_requires="gtk-doc >= $1"]) AC_MSG_CHECKING([for gtk-doc]) PKG_CHECK_EXISTS([$gtk_doc_requires],[have_gtk_doc=yes],[have_gtk_doc=no]) AC_MSG_RESULT($have_gtk_doc) if test "$have_gtk_doc" = "no"; then AC_MSG_WARN([ You will not be able to create source packages with 'make dist' because $gtk_doc_requires is not found.]) fi dnl check for tools we added during development dnl Use AC_CHECK_PROG to avoid the check target using an absolute path that dnl may not be writable by the user. Currently, automake requires that the dnl test name must end in '.test'. dnl https://bugzilla.gnome.org/show_bug.cgi?id=701638 AC_CHECK_PROG([GTKDOC_CHECK],[gtkdoc-check],[gtkdoc-check.test]) AC_PATH_PROG([GTKDOC_CHECK_PATH],[gtkdoc-check]) AC_PATH_PROGS([GTKDOC_REBASE],[gtkdoc-rebase],[true]) AC_PATH_PROG([GTKDOC_MKPDF],[gtkdoc-mkpdf]) dnl for overriding the documentation installation directory AC_ARG_WITH([html-dir], AS_HELP_STRING([--with-html-dir=PATH], [path to installed docs]),, [with_html_dir='${datadir}/gtk-doc/html']) HTML_DIR="$with_html_dir" AC_SUBST([HTML_DIR]) dnl enable/disable documentation building AC_ARG_ENABLE([gtk-doc], AS_HELP_STRING([--enable-gtk-doc], [use gtk-doc to build documentation [[default=no]]]),, [enable_gtk_doc=no]) AC_MSG_CHECKING([whether to build gtk-doc documentation]) AC_MSG_RESULT($enable_gtk_doc) if test "x$enable_gtk_doc" = "xyes" && test "$have_gtk_doc" = "no"; then AC_MSG_ERROR([ You must have $gtk_doc_requires installed to build documentation for $PACKAGE_NAME. Please install gtk-doc or disable building the documentation by adding '--disable-gtk-doc' to '[$]0'.]) fi dnl don't check for glib if we build glib if test "x$PACKAGE_NAME" != "xglib"; then dnl don't fail if someone does not have glib PKG_CHECK_MODULES(GTKDOC_DEPS, glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0,,[:]) fi dnl enable/disable output formats AC_ARG_ENABLE([gtk-doc-html], AS_HELP_STRING([--enable-gtk-doc-html], [build documentation in html format [[default=yes]]]),, [enable_gtk_doc_html=yes]) AC_ARG_ENABLE([gtk-doc-pdf], AS_HELP_STRING([--enable-gtk-doc-pdf], [build documentation in pdf format [[default=no]]]),, [enable_gtk_doc_pdf=no]) if test -z "$GTKDOC_MKPDF"; then enable_gtk_doc_pdf=no fi if test -z "$AM_DEFAULT_VERBOSITY"; then AM_DEFAULT_VERBOSITY=1 fi AC_SUBST([AM_DEFAULT_VERBOSITY]) AM_CONDITIONAL([HAVE_GTK_DOC], [test x$have_gtk_doc = xyes]) AM_CONDITIONAL([ENABLE_GTK_DOC], [test x$enable_gtk_doc = xyes]) AM_CONDITIONAL([GTK_DOC_BUILD_HTML], [test x$enable_gtk_doc_html = xyes]) AM_CONDITIONAL([GTK_DOC_BUILD_PDF], [test x$enable_gtk_doc_pdf = xyes]) AM_CONDITIONAL([GTK_DOC_USE_LIBTOOL], [test -n "$LIBTOOL"]) AM_CONDITIONAL([GTK_DOC_USE_REBASE], [test -n "$GTKDOC_REBASE"]) ]) parlatype-1.5.4/libparlatype/Makefile.am0000644000175000017500000000116513202105736015171 00000000000000SUBDIRS = data po src docs # docs must be after src if WITH_TESTS SUBDIRS += tests endif ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS} # Distribute test infrastructure # ax_code_coverage.m4 and ax_valgrind_check.m4 would be available in autoconf-archive # ax_code_coverage.m4 first in version 2014.10.15 but we support older systems # ax_valgrind_check.m4 first in version 2015.02.04 but we support older systems EXTRA_DIST = \ config.rpath \ glib-tap.mk \ tap-driver.sh \ tap-test \ test-driver \ m4/ax_code_coverage.m4 \ m4/ax_valgrind_check.m4 \ m4/glibtests.m4 DISTCLEANFILES = `find . -mindepth 1 -iname "*~"` parlatype-1.5.4/po/0000755000175000017500000000000013204324054011136 500000000000000parlatype-1.5.4/po/it.po0000644000175000017500000002011513176574165012053 00000000000000# Italian translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Luca Ciavatta , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-01-16 21:45+0100\n" "PO-Revision-Date: 2017-01-17 17:30+0000\n" "Last-Translator: Luca Ciavatta \n" "Language-Team: Italian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2017-01-26 11:32+0000\n" "X-Generator: Launchpad (build 18315)\n" #: ../data/org.gnome.parlatype.appdata.xml.in.h:1 #: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:66 #: ../src/pt-app.c:209 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" #: ../data/org.gnome.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "Lettore multimediale per la trascrizione vocale manuale" #: ../data/org.gnome.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" "Parlatype è un lettore multimediale facile da usare. Il suo scopo principale " "è quello di aiutare a trascrivere il parlato." #: ../data/org.gnome.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "Utilità di trascrizione" #: ../src/main.c:42 msgid "Show the application's version" msgstr "Mostra la versione dell'applicazione" #: ../src/main.c:58 msgid "Fatal error" msgstr "Errore critico" #: ../src/main.c:62 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" "Parlatype ha necessità di GStreamer 1.x per funzionare. Si prega di " "verificare la propria installazione di GStreamer e assicurarsi di avere i " "\"Good Plugins\" installati.\n" "Parlatype terminerà l'esecuzione ora. Messaggio di errore: % s" #. Translators: This is part of the output if you type `parlatype --help` #. in terminal. The square brackets indicate that a file (filename) is #. an optional argument for parlatype. Arguments in help output are usually #. uppercase. #: ../src/main.c:84 msgid "[FILE]" msgstr "[FILE]" #: ../src/main.c:87 msgid "Minimal audio player for manual speech transcription" msgstr "Lettore audio minimale per la trascrizione vocale manuale" #: ../src/pt-app.c:57 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "File recenti" #: ../src/pt-app.c:59 ../src/pt-app.c:116 msgid "_Cancel" msgstr "_Annulla" #: ../src/pt-app.c:60 ../src/pt-app.c:117 msgid "_Open" msgstr "_Apri" #: ../src/pt-app.c:72 ../src/pt-app.c:128 msgid "All files" msgstr "Tutti i file" #: ../src/pt-app.c:113 msgid "Open Audio File" msgstr "Aprire File Audio" #: ../src/pt-app.c:127 msgid "Audio files" msgstr "File audio" #. Translators: %s is a detailed error message #: ../src/pt-app.c:176 #, c-format msgid "Error opening help: %s" msgstr "Errore apertura aiuto: %s" #. Translators: This is part of the about box, followed by the #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" #: ../src/pt-app.c:194 msgid "Including code from other projects:" msgstr "Incluso il codice da altri progetti:" #: ../src/pt-app.c:212 msgid "A basic transcription utility" msgstr "Un programma di trascrizione" #: ../src/pt-app.c:216 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Luca Ciavatta https://launchpad.net/~cialu" #: ../src/pt-app.c:369 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" msgstr "" "Attenzione: Parlatype gestisce un solo file alla volta. Gli altri file " "vengono ignorati.\n" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-goto-dialog.c:49 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is part of the Preferences dialog #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. #: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 #: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 msgid "second" msgid_plural "seconds" msgstr[0] "secondo" msgstr[1] "secondi" #: ../src/pt-preferences.c:164 msgid "_Close" msgstr "_Chiudi" #: ../src/pt-window.c:218 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Indietro di 1 secondo" msgstr[1] "Indietro di %d secondi" #: ../src/pt-window.c:232 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "Avanti di 1 secondo" msgstr[1] "Avanti di %d secondi" #: ../src/pt-window.c:247 msgid "Pause" msgstr "Pausa" #: ../src/pt-window.c:250 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Pausa e indietro di 1 secondo" msgstr[1] "Pausa e indietro di %d secondi" #: ../src/pt-window.c:256 msgid "Start playing" msgstr "Avvia la riproduzione" #: ../src/pt-window.c:727 msgid "View follows cursor" msgstr "Vista segue il cursore" #: ../src/pt-window.c:729 msgid "Click to follow cursor" msgstr "Clicca per seguire il cursore" #: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 msgid "Go to ..." msgstr "Vai a ..." #: ../src/resources/goto-dialog.ui.h:2 msgid "Go to position:" msgstr "Vai alla posizione:" #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Apri file" #: ../src/resources/menus.ui.h:3 msgid "Preferences" msgstr "Preferenze" #: ../src/resources/menus.ui.h:4 msgid "Help" msgstr "Aiuto" #: ../src/resources/menus.ui.h:5 msgid "Info" msgstr "Informazioni" #: ../src/resources/menus.ui.h:6 msgid "Quit" msgstr "Esci" #: ../src/resources/menus.ui.h:7 msgid "Copy timestamp" msgstr "Copia marca temporale" #: ../src/resources/menus.ui.h:8 msgid "Insert timestamp" msgstr "Inserisci marca temporale" #: ../src/resources/menus.ui.h:10 msgid "_File" msgstr "_File" #: ../src/resources/menus.ui.h:11 msgid "_Edit" msgstr "_Modifica" #: ../src/resources/menus.ui.h:12 msgid "_Help" msgstr "_Aiuto" #: ../src/resources/preferences.ui.h:1 msgid "Parlatype Preferences" msgstr "Preferenze di Parlatype" #: ../src/resources/preferences.ui.h:2 msgid "_Pixels per second:" msgstr "_Pixels al secondo:" #: ../src/resources/preferences.ui.h:3 msgid "Show _time scale" msgstr "Mostra scala _temporale" #. Resolution of the waveform image #: ../src/resources/preferences.ui.h:5 msgid "Resolution" msgstr "Risoluzione" #. A section in preferences, how to display the waveform. #: ../src/resources/preferences.ui.h:7 msgid "Display" msgstr "Visualizzazione" #: ../src/resources/preferences.ui.h:8 msgid "_Moving cursor" msgstr "Cursore in _movimento" #: ../src/resources/preferences.ui.h:9 msgid "_Fixed cursor" msgstr "Cursore _fisso" #: ../src/resources/preferences.ui.h:10 msgid "Waveform" msgstr "Forma d’onda" #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "Indietro in _pausa:" #: ../src/resources/preferences.ui.h:12 msgid "Jump _back:" msgstr "_Indietro:" #: ../src/resources/preferences.ui.h:13 msgid "Jump _forward:" msgstr "_Avanti:" #: ../src/resources/preferences.ui.h:14 msgid "Controls" msgstr "Controlli" #: ../src/resources/preferences.ui.h:15 msgid "Remember _position" msgstr "Ricorda la _posizione" #: ../src/resources/preferences.ui.h:16 msgid "Start on _top" msgstr "" #: ../src/resources/preferences.ui.h:17 msgid "Window" msgstr "Finestra" #: ../src/resources/window.ui.h:2 msgid "Speed:" msgstr "Velocità:" #: ../src/resources/window-headerbar.ui.h:2 msgid "Open a file" msgstr "Aprire un file" parlatype-1.5.4/po/he.po0000644000175000017500000001474313176574165012045 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-01-16 21:45+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: he\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1)\n" #: ../data/org.gnome.parlatype.appdata.xml.in.h:1 #: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:66 #: ../src/pt-app.c:209 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "" #: ../data/org.gnome.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "" #: ../data/org.gnome.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" #: ../data/org.gnome.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "" #: ../src/main.c:42 msgid "Show the application's version" msgstr "" #: ../src/main.c:58 msgid "Fatal error" msgstr "" #: ../src/main.c:62 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" #. Translators: This is part of the output if you type `parlatype --help` #. in terminal. The square brackets indicate that a file (filename) is #. an optional argument for parlatype. Arguments in help output are usually #. uppercase. #: ../src/main.c:84 msgid "[FILE]" msgstr "" #: ../src/main.c:87 msgid "Minimal audio player for manual speech transcription" msgstr "" #: ../src/pt-app.c:57 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "" #: ../src/pt-app.c:59 ../src/pt-app.c:116 msgid "_Cancel" msgstr "" #: ../src/pt-app.c:60 ../src/pt-app.c:117 msgid "_Open" msgstr "" #: ../src/pt-app.c:72 ../src/pt-app.c:128 msgid "All files" msgstr "" #: ../src/pt-app.c:113 msgid "Open Audio File" msgstr "" #: ../src/pt-app.c:127 msgid "Audio files" msgstr "" #. Translators: %s is a detailed error message #: ../src/pt-app.c:176 #, c-format msgid "Error opening help: %s" msgstr "" #. Translators: This is part of the about box, followed by the #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" #: ../src/pt-app.c:194 msgid "Including code from other projects:" msgstr "" #: ../src/pt-app.c:212 msgid "A basic transcription utility" msgstr "" #: ../src/pt-app.c:216 msgid "translator-credits" msgstr "" #: ../src/pt-app.c:369 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" msgstr "" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-goto-dialog.c:49 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "" #. Translators: This is part of the Preferences dialog #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. #: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 #: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 msgid "second" msgid_plural "seconds" msgstr[0] "" msgstr[1] "" #: ../src/pt-preferences.c:164 msgid "_Close" msgstr "" #: ../src/pt-window.c:218 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "" msgstr[1] "" #: ../src/pt-window.c:232 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "" msgstr[1] "" #: ../src/pt-window.c:247 msgid "Pause" msgstr "" #: ../src/pt-window.c:250 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "" msgstr[1] "" #: ../src/pt-window.c:256 msgid "Start playing" msgstr "" #: ../src/pt-window.c:727 msgid "View follows cursor" msgstr "" #: ../src/pt-window.c:729 msgid "Click to follow cursor" msgstr "" #: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 msgid "Go to ..." msgstr "" #: ../src/resources/goto-dialog.ui.h:2 msgid "Go to position:" msgstr "" #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "" #: ../src/resources/menus.ui.h:3 msgid "Preferences" msgstr "" #: ../src/resources/menus.ui.h:4 msgid "Help" msgstr "" #: ../src/resources/menus.ui.h:5 msgid "Info" msgstr "" #: ../src/resources/menus.ui.h:6 msgid "Quit" msgstr "" #: ../src/resources/menus.ui.h:7 msgid "Copy timestamp" msgstr "" #: ../src/resources/menus.ui.h:8 msgid "Insert timestamp" msgstr "" #: ../src/resources/menus.ui.h:10 msgid "_File" msgstr "" #: ../src/resources/menus.ui.h:11 msgid "_Edit" msgstr "" #: ../src/resources/menus.ui.h:12 msgid "_Help" msgstr "" #: ../src/resources/preferences.ui.h:1 msgid "Parlatype Preferences" msgstr "" #: ../src/resources/preferences.ui.h:2 msgid "_Pixels per second:" msgstr "" #: ../src/resources/preferences.ui.h:3 msgid "Show _time scale" msgstr "" #. Resolution of the waveform image #: ../src/resources/preferences.ui.h:5 msgid "Resolution" msgstr "" #. A section in preferences, how to display the waveform. #: ../src/resources/preferences.ui.h:7 msgid "Display" msgstr "" #: ../src/resources/preferences.ui.h:8 msgid "_Moving cursor" msgstr "" #: ../src/resources/preferences.ui.h:9 msgid "_Fixed cursor" msgstr "" #: ../src/resources/preferences.ui.h:10 msgid "Waveform" msgstr "" #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "" #: ../src/resources/preferences.ui.h:12 msgid "Jump _back:" msgstr "" #: ../src/resources/preferences.ui.h:13 msgid "Jump _forward:" msgstr "" #: ../src/resources/preferences.ui.h:14 msgid "Controls" msgstr "" #: ../src/resources/preferences.ui.h:15 msgid "Remember _position" msgstr "" #: ../src/resources/preferences.ui.h:16 msgid "Start on _top" msgstr "" #: ../src/resources/preferences.ui.h:17 msgid "Window" msgstr "" #: ../src/resources/window.ui.h:2 msgid "Speed:" msgstr "" #: ../src/resources/window-headerbar.ui.h:2 msgid "Open a file" msgstr "" parlatype-1.5.4/po/kab.po0000644000175000017500000001550013176574165012176 00000000000000# Kabyle translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Belkacem Mohammed , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-01-16 21:45+0100\n" "PO-Revision-Date: 2017-01-17 13:43+0000\n" "Last-Translator: Belkacem Mohammed \n" "Language-Team: Kabyle \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2017-01-26 11:32+0000\n" "X-Generator: Launchpad (build 18315)\n" #: ../data/org.gnome.parlatype.appdata.xml.in.h:1 #: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:66 #: ../src/pt-app.c:209 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" #: ../data/org.gnome.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "" #: ../data/org.gnome.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" #: ../data/org.gnome.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "" #: ../src/main.c:42 msgid "Show the application's version" msgstr "" #: ../src/main.c:58 msgid "Fatal error" msgstr "" #: ../src/main.c:62 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" #. Translators: This is part of the output if you type `parlatype --help` #. in terminal. The square brackets indicate that a file (filename) is #. an optional argument for parlatype. Arguments in help output are usually #. uppercase. #: ../src/main.c:84 msgid "[FILE]" msgstr "[FILE]" #: ../src/main.c:87 msgid "Minimal audio player for manual speech transcription" msgstr "" #: ../src/pt-app.c:57 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Ifayluyen ineggura" #: ../src/pt-app.c:59 ../src/pt-app.c:116 msgid "_Cancel" msgstr "_Sefsex" #: ../src/pt-app.c:60 ../src/pt-app.c:117 msgid "_Open" msgstr "_Ldi" #: ../src/pt-app.c:72 ../src/pt-app.c:128 msgid "All files" msgstr "Akk ifuyla" #: ../src/pt-app.c:113 msgid "Open Audio File" msgstr "Ldi afaylu ameslaw" #: ../src/pt-app.c:127 msgid "Audio files" msgstr "Ifuyla imeslawen" #. Translators: %s is a detailed error message #: ../src/pt-app.c:176 #, c-format msgid "Error opening help: %s" msgstr "Tuccḍa di tulya n tallalt: %s" #. Translators: This is part of the about box, followed by the #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" #: ../src/pt-app.c:194 msgid "Including code from other projects:" msgstr "" #: ../src/pt-app.c:212 msgid "A basic transcription utility" msgstr "" #: ../src/pt-app.c:216 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Belkacem Mohammed https://launchpad.net/~belkacem77" #: ../src/pt-app.c:369 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" msgstr "" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-goto-dialog.c:49 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is part of the Preferences dialog #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. #: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 #: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 msgid "second" msgid_plural "seconds" msgstr[0] "tasint" msgstr[1] "tasinin" #: ../src/pt-preferences.c:164 msgid "_Close" msgstr "_Mdel" #: ../src/pt-window.c:218 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "" msgstr[1] "" #: ../src/pt-window.c:232 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "" msgstr[1] "" #: ../src/pt-window.c:247 msgid "Pause" msgstr "" #: ../src/pt-window.c:250 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "" msgstr[1] "" #: ../src/pt-window.c:256 msgid "Start playing" msgstr "" #: ../src/pt-window.c:727 msgid "View follows cursor" msgstr "" #: ../src/pt-window.c:729 msgid "Click to follow cursor" msgstr "" #: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 msgid "Go to ..." msgstr "" #: ../src/resources/goto-dialog.ui.h:2 msgid "Go to position:" msgstr "" #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "" #: ../src/resources/menus.ui.h:3 msgid "Preferences" msgstr "" #: ../src/resources/menus.ui.h:4 msgid "Help" msgstr "" #: ../src/resources/menus.ui.h:5 msgid "Info" msgstr "" #: ../src/resources/menus.ui.h:6 msgid "Quit" msgstr "" #: ../src/resources/menus.ui.h:7 msgid "Copy timestamp" msgstr "" #: ../src/resources/menus.ui.h:8 msgid "Insert timestamp" msgstr "" #: ../src/resources/menus.ui.h:10 msgid "_File" msgstr "" #: ../src/resources/menus.ui.h:11 msgid "_Edit" msgstr "" #: ../src/resources/menus.ui.h:12 msgid "_Help" msgstr "" #: ../src/resources/preferences.ui.h:1 msgid "Parlatype Preferences" msgstr "" #: ../src/resources/preferences.ui.h:2 msgid "_Pixels per second:" msgstr "" #: ../src/resources/preferences.ui.h:3 msgid "Show _time scale" msgstr "" #. Resolution of the waveform image #: ../src/resources/preferences.ui.h:5 msgid "Resolution" msgstr "" #. A section in preferences, how to display the waveform. #: ../src/resources/preferences.ui.h:7 msgid "Display" msgstr "" #: ../src/resources/preferences.ui.h:8 msgid "_Moving cursor" msgstr "" #: ../src/resources/preferences.ui.h:9 msgid "_Fixed cursor" msgstr "" #: ../src/resources/preferences.ui.h:10 msgid "Waveform" msgstr "" #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "" #: ../src/resources/preferences.ui.h:12 msgid "Jump _back:" msgstr "" #: ../src/resources/preferences.ui.h:13 msgid "Jump _forward:" msgstr "" #: ../src/resources/preferences.ui.h:14 msgid "Controls" msgstr "" #: ../src/resources/preferences.ui.h:15 msgid "Remember _position" msgstr "" #: ../src/resources/preferences.ui.h:16 msgid "Start on _top" msgstr "" #: ../src/resources/preferences.ui.h:17 msgid "Window" msgstr "" #: ../src/resources/window.ui.h:2 msgid "Speed:" msgstr "" #: ../src/resources/window-headerbar.ui.h:2 msgid "Open a file" msgstr "" parlatype-1.5.4/po/Makefile.in.in0000644000175000017500000001604613167645026013554 00000000000000# Makefile for program source directory in GNU NLS utilities package. # Copyright (C) 1995, 1996, 1997 by Ulrich Drepper # Copyright (C) 2004-2008 Rodney Dawes # # This file may be copied and used freely without restrictions. It may # be used in projects which are not available under a GNU Public License, # but which still want to provide support for the GNU gettext functionality. # # - Modified by Owen Taylor to use GETTEXT_PACKAGE # instead of PACKAGE and to look for po2tbl in ./ not in intl/ # # - Modified by jacob berkman to install # Makefile.in.in and po2tbl.sed.in for use with glib-gettextize # # - Modified by Rodney Dawes for use with intltool # # We have the following line for use by intltoolize: # INTLTOOL_MAKEFILE GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ PACKAGE = @PACKAGE@ VERSION = @VERSION@ SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ top_builddir = @top_builddir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ datadir = @datadir@ datarootdir = @datarootdir@ libdir = @libdir@ DATADIRNAME = @DATADIRNAME@ itlocaledir = $(prefix)/$(DATADIRNAME)/locale subdir = po install_sh = @install_sh@ # Automake >= 1.8 provides @mkdir_p@. # Until it can be supposed, use the safe fallback: mkdir_p = $(install_sh) -d INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ GMSGFMT = @GMSGFMT@ MSGFMT = @MSGFMT@ XGETTEXT = @XGETTEXT@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ MSGMERGE = INTLTOOL_EXTRACT="$(INTLTOOL_EXTRACT)" XGETTEXT="$(XGETTEXT)" srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --dist GENPOT = INTLTOOL_EXTRACT="$(INTLTOOL_EXTRACT)" XGETTEXT="$(XGETTEXT)" srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --pot ALL_LINGUAS = @ALL_LINGUAS@ PO_LINGUAS=$(shell if test -r $(srcdir)/LINGUAS; then grep -v "^\#" $(srcdir)/LINGUAS; else echo "$(ALL_LINGUAS)"; fi) USER_LINGUAS=$(shell if test -n "$(LINGUAS)"; then LLINGUAS="$(LINGUAS)"; ALINGUAS="$(ALL_LINGUAS)"; for lang in $$LLINGUAS; do if test -n "`grep \^$$lang$$ $(srcdir)/LINGUAS 2>/dev/null`" -o -n "`echo $$ALINGUAS|tr ' ' '\n'|grep \^$$lang$$`"; then printf "$$lang "; fi; done; fi) USE_LINGUAS=$(shell if test -n "$(USER_LINGUAS)" -o -n "$(LINGUAS)"; then LLINGUAS="$(USER_LINGUAS)"; else if test -n "$(PO_LINGUAS)"; then LLINGUAS="$(PO_LINGUAS)"; else LLINGUAS="$(ALL_LINGUAS)"; fi; fi; for lang in $$LLINGUAS; do printf "$$lang "; done) POFILES=$(shell LINGUAS="$(PO_LINGUAS)"; for lang in $$LINGUAS; do printf "$$lang.po "; done) DISTFILES = Makefile.in.in POTFILES.in $(POFILES) EXTRA_DISTFILES = ChangeLog POTFILES.skip Makevars LINGUAS POTFILES = \ # This comment gets stripped out CATALOGS=$(shell LINGUAS="$(USE_LINGUAS)"; for lang in $$LINGUAS; do printf "$$lang.gmo "; done) .SUFFIXES: .SUFFIXES: .po .pox .gmo .mo .msg .cat AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ INTLTOOL_V_MSGFMT = $(INTLTOOL__v_MSGFMT_$(V)) INTLTOOL__v_MSGFMT_= $(INTLTOOL__v_MSGFMT_$(AM_DEFAULT_VERBOSITY)) INTLTOOL__v_MSGFMT_0 = @echo " MSGFMT" $@; .po.pox: $(MAKE) $(GETTEXT_PACKAGE).pot $(MSGMERGE) $< $(GETTEXT_PACKAGE).pot -o $*.pox .po.mo: $(INTLTOOL_V_MSGFMT)$(MSGFMT) -o $@ $< .po.gmo: $(INTLTOOL_V_MSGFMT)file=`echo $* | sed 's,.*/,,'`.gmo \ && rm -f $$file && $(GMSGFMT) -o $$file $< .po.cat: sed -f ../intl/po2msg.sed < $< > $*.msg \ && rm -f $@ && gencat $@ $*.msg all: all-@USE_NLS@ all-yes: $(CATALOGS) all-no: $(GETTEXT_PACKAGE).pot: $(POTFILES) $(GENPOT) install: install-data install-data: install-data-@USE_NLS@ install-data-no: all install-data-yes: all linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ dir=$(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES; \ $(mkdir_p) $$dir; \ if test -r $$lang.gmo; then \ $(INSTALL_DATA) $$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \ echo "installing $$lang.gmo as $$dir/$(GETTEXT_PACKAGE).mo"; \ else \ $(INSTALL_DATA) $(srcdir)/$$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \ echo "installing $(srcdir)/$$lang.gmo as" \ "$$dir/$(GETTEXT_PACKAGE).mo"; \ fi; \ if test -r $$lang.gmo.m; then \ $(INSTALL_DATA) $$lang.gmo.m $$dir/$(GETTEXT_PACKAGE).mo.m; \ echo "installing $$lang.gmo.m as $$dir/$(GETTEXT_PACKAGE).mo.m"; \ else \ if test -r $(srcdir)/$$lang.gmo.m ; then \ $(INSTALL_DATA) $(srcdir)/$$lang.gmo.m \ $$dir/$(GETTEXT_PACKAGE).mo.m; \ echo "installing $(srcdir)/$$lang.gmo.m as" \ "$$dir/$(GETTEXT_PACKAGE).mo.m"; \ else \ true; \ fi; \ fi; \ done # Empty stubs to satisfy archaic automake needs dvi info ctags tags CTAGS TAGS ID: # Define this as empty until I found a useful application. install-exec installcheck: uninstall: linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \ rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \ done check: all $(GETTEXT_PACKAGE).pot rm -f missing notexist srcdir=$(srcdir) $(INTLTOOL_UPDATE) -m if [ -r missing -o -r notexist ]; then \ exit 1; \ fi mostlyclean: rm -f *.pox $(GETTEXT_PACKAGE).pot *.old.po cat-id-tbl.tmp rm -f .intltool-merge-cache clean: mostlyclean distclean: clean rm -f Makefile Makefile.in POTFILES stamp-it rm -f *.mo *.msg *.cat *.cat.m *.gmo maintainer-clean: distclean @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." rm -f Makefile.in.in distdir = ../$(PACKAGE)-$(VERSION)/$(subdir) dist distdir: $(DISTFILES) dists="$(DISTFILES)"; \ extra_dists="$(EXTRA_DISTFILES)"; \ for file in $$extra_dists; do \ test -f $(srcdir)/$$file && dists="$$dists $(srcdir)/$$file"; \ done; \ for file in $$dists; do \ test -f $$file || file="$(srcdir)/$$file"; \ ln $$file $(distdir) 2> /dev/null \ || cp -p $$file $(distdir); \ done update-po: Makefile $(MAKE) $(GETTEXT_PACKAGE).pot tmpdir=`pwd`; \ linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ echo "$$lang:"; \ result="`$(MSGMERGE) -o $$tmpdir/$$lang.new.po $$lang`"; \ if $$result; then \ if cmp $(srcdir)/$$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ rm -f $$tmpdir/$$lang.new.po; \ else \ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ :; \ else \ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ rm -f $$tmpdir/$$lang.new.po; \ exit 1; \ fi; \ fi; \ else \ echo "msgmerge for $$lang.gmo failed!"; \ rm -f $$tmpdir/$$lang.new.po; \ fi; \ done Makefile POTFILES: stamp-it @if test ! -f $@; then \ rm -f stamp-it; \ $(MAKE) stamp-it; \ fi stamp-it: Makefile.in.in $(top_builddir)/config.status POTFILES.in cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/Makefile.in CONFIG_HEADERS= CONFIG_LINKS= \ $(SHELL) ./config.status # Tell versions [3.59,3.63) of GNU make not to export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: parlatype-1.5.4/po/ca.po0000644000175000017500000002006213176574165012023 00000000000000# Catalan translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # VPablo , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-01-16 21:45+0100\n" "PO-Revision-Date: 2017-01-20 20:15+0000\n" "Last-Translator: VPablo \n" "Language-Team: Catalan \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2017-01-20 21:44+0000\n" "X-Generator: Launchpad (build 18302)\n" #: ../data/org.gnome.parlatype.appdata.xml.in.h:1 #: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:66 #: ../src/pt-app.c:209 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" #: ../data/org.gnome.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "Reproductor de mitjans per a la transcripció manual de veu" #: ../data/org.gnome.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" "Parlatype és un reproductor de mitjans fàcil d'usar. El seu principal " "propòsit és ajudar a transcriure discursos." #: ../data/org.gnome.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "Utilitat de transcripció" #: ../src/main.c:42 msgid "Show the application's version" msgstr "Mostra la versió de l'aplicació" #: ../src/main.c:58 msgid "Fatal error" msgstr "Error greu" #: ../src/main.c:62 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" "Parlatype necessita GStreamer 1.x per funcionar. Per favor comprove la seua " "instal·lació de GStreamer i fixe's que te el \"Goog plugins\" instal·lat.\n" "Parlatype eixirà ara, ha rebut el següent missatge:%s" #. Translators: This is part of the output if you type `parlatype --help` #. in terminal. The square brackets indicate that a file (filename) is #. an optional argument for parlatype. Arguments in help output are usually #. uppercase. #: ../src/main.c:84 msgid "[FILE]" msgstr "[FITXER]" #: ../src/main.c:87 msgid "Minimal audio player for manual speech transcription" msgstr "Reproductor d'àudio mínim per transcripció manual de discursos" #: ../src/pt-app.c:57 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Fitxers recents" #: ../src/pt-app.c:59 ../src/pt-app.c:116 msgid "_Cancel" msgstr "_Cancel·la" #: ../src/pt-app.c:60 ../src/pt-app.c:117 msgid "_Open" msgstr "_Obre" #: ../src/pt-app.c:72 ../src/pt-app.c:128 msgid "All files" msgstr "Tots els fitxers" #: ../src/pt-app.c:113 msgid "Open Audio File" msgstr "Obre Fitxer d'Àudio" #: ../src/pt-app.c:127 msgid "Audio files" msgstr "Fitxers d'àudio" #. Translators: %s is a detailed error message #: ../src/pt-app.c:176 #, c-format msgid "Error opening help: %s" msgstr "Error obrint ajuda: %s" #. Translators: This is part of the about box, followed by the #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" #: ../src/pt-app.c:194 msgid "Including code from other projects:" msgstr "Inclou codi d'altres projectes:" #: ../src/pt-app.c:212 msgid "A basic transcription utility" msgstr "Una utilitat bàsica de transcripció" #: ../src/pt-app.c:216 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " VPablo https://launchpad.net/~villumar" #: ../src/pt-app.c:369 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" msgstr "" "Advertència: Parlatype fa servir només un fitxer alhora. Els altres fitxers " "s'ignoraran.\n" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-goto-dialog.c:49 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is part of the Preferences dialog #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. #: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 #: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 msgid "second" msgid_plural "seconds" msgstr[0] "segon" msgstr[1] "segons" #: ../src/pt-preferences.c:164 msgid "_Close" msgstr "_Tanca" #: ../src/pt-window.c:218 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Torna 1 segon enrere" msgstr[1] "Torna %d segons enrere" #: ../src/pt-window.c:232 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "Avança 1 segon" msgstr[1] "Avança %d segons" #: ../src/pt-window.c:247 msgid "Pause" msgstr "Pausa" #: ../src/pt-window.c:250 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Pausa i torna 1 segon enrere" msgstr[1] "Pausa i torna %d segons enrere" #: ../src/pt-window.c:256 msgid "Start playing" msgstr "Inicia la reproducció" #: ../src/pt-window.c:727 msgid "View follows cursor" msgstr "La vista segueix el cursor" #: ../src/pt-window.c:729 msgid "Click to follow cursor" msgstr "Clica per seguir el cursor" #: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 msgid "Go to ..." msgstr "Anar a ..." #: ../src/resources/goto-dialog.ui.h:2 msgid "Go to position:" msgstr "Anar a la posició:" #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Obre el fitxer" #: ../src/resources/menus.ui.h:3 msgid "Preferences" msgstr "Preferències" #: ../src/resources/menus.ui.h:4 msgid "Help" msgstr "Ajuda" #: ../src/resources/menus.ui.h:5 msgid "Info" msgstr "Info" #: ../src/resources/menus.ui.h:6 msgid "Quit" msgstr "Surt" #: ../src/resources/menus.ui.h:7 msgid "Copy timestamp" msgstr "Còpia marca de temps" #: ../src/resources/menus.ui.h:8 msgid "Insert timestamp" msgstr "Inserta marca de temps" #: ../src/resources/menus.ui.h:10 msgid "_File" msgstr "_Fitxer" #: ../src/resources/menus.ui.h:11 msgid "_Edit" msgstr "_Edita" #: ../src/resources/menus.ui.h:12 msgid "_Help" msgstr "_Ajuda" #: ../src/resources/preferences.ui.h:1 msgid "Parlatype Preferences" msgstr "Preferències de Parlatype" #: ../src/resources/preferences.ui.h:2 msgid "_Pixels per second:" msgstr "_Píxels per segon:" #: ../src/resources/preferences.ui.h:3 msgid "Show _time scale" msgstr "Mostra escala de _temps" #. Resolution of the waveform image #: ../src/resources/preferences.ui.h:5 msgid "Resolution" msgstr "Resolució" #. A section in preferences, how to display the waveform. #: ../src/resources/preferences.ui.h:7 msgid "Display" msgstr "Visualitza" #: ../src/resources/preferences.ui.h:8 msgid "_Moving cursor" msgstr "Cursor _mòvil" #: ../src/resources/preferences.ui.h:9 msgid "_Fixed cursor" msgstr "Cursor _fixe" #: ../src/resources/preferences.ui.h:10 msgid "Waveform" msgstr "Forma d'ona" #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "Torna enrere quan es _pause:" #: ../src/resources/preferences.ui.h:12 msgid "Jump _back:" msgstr "Torna _enrere:" #: ../src/resources/preferences.ui.h:13 msgid "Jump _forward:" msgstr "_Avança:" #: ../src/resources/preferences.ui.h:14 msgid "Controls" msgstr "Controls" #: ../src/resources/preferences.ui.h:15 msgid "Remember _position" msgstr "Recorda _posició" #: ../src/resources/preferences.ui.h:16 msgid "Start on _top" msgstr "Comença a la par_t superior" #: ../src/resources/preferences.ui.h:17 msgid "Window" msgstr "Finestra" #: ../src/resources/window.ui.h:2 msgid "Speed:" msgstr "Velocitat:" #: ../src/resources/window-headerbar.ui.h:2 msgid "Open a file" msgstr "Obre un fitxer" parlatype-1.5.4/po/fr.po0000644000175000017500000002253013176574165012051 00000000000000# French translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # archi02 , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-07-26 18:17+0200\n" "PO-Revision-Date: 2017-07-20 08:43+0000\n" "Last-Translator: archi02 \n" "Language-Team: French \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n > 1;\n" "X-Launchpad-Export-Date: 2017-07-30 07:24+0000\n" "X-Generator: Launchpad (build 18441)\n" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 #: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 #: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "Lecteur média pour la transcription manuelle de discours" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" "Parlatype est un lecteur média simple d'utilisation. Il est conçu pour " "simplifier la transcription de discours." #: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "Outil de transcription" #: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 msgid "Transcription;" msgstr "Transcription;" #: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 msgid "LibreOffice/Parlatype Helpers" msgstr "LIbreOffice/Parlatype Assistants" #: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 msgid "Control Parlatype using LibreOffice macros" msgstr "Contrôler Parlatype à l'aide de macros LibreOffice" #: ../src/main.c:36 msgid "Fatal error" msgstr "Erreur fatale" #: ../src/main.c:40 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" "Parlatype nécessite Gstreamer 1.x pour fonctionner. Prière de vérifier votre " "installation de Gstreamer, et de vous assurer que les extensions \"Good\" " "sont installées.\n" "Parlatype va maintenant quitter avec le message d'erreur suivant : %s" #: ../src/pt-app.c:55 msgid "Show the application's version" msgstr "Afficher la version de l'application" #: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Fichiers récents" #: ../src/pt-app.c:77 ../src/pt-app.c:134 msgid "_Cancel" msgstr "_Annuler" #: ../src/pt-app.c:78 ../src/pt-app.c:135 msgid "_Open" msgstr "_Ouvrir" #: ../src/pt-app.c:90 ../src/pt-app.c:146 msgid "All files" msgstr "Tous les fichiers" #: ../src/pt-app.c:131 msgid "Open Audio File" msgstr "Ouvrir un fichier audio" #: ../src/pt-app.c:145 msgid "Audio files" msgstr "Fichiers audio" #. Translators: %s is a detailed error message #: ../src/pt-app.c:202 #, c-format msgid "Error opening help: %s" msgstr "Erreur à l'ouverture de l'aide : %s" #. Translators: This is part of the about box, followed by the #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" #: ../src/pt-app.c:220 msgid "Including code from other projects:" msgstr "Inclut du code issu d'autres projets :" #: ../src/pt-app.c:238 msgid "A basic transcription utility" msgstr "Un outil de transcription basique" #: ../src/pt-app.c:242 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " archi02 https://launchpad.net/~jo-chibois" #: ../src/pt-app.c:424 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" msgstr "" "Avertissement : Parlatype ne gère qu'un fichier à la fois. Les autres " "fichiers sont ignorés.\n" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-goto-dialog.c:49 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is part of the Preferences dialog #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. #: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:58 #: ../src/pt-preferences.c:68 ../src/pt-preferences.c:78 msgid "second" msgid_plural "seconds" msgstr[0] "seconde" msgstr[1] "secondes" #: ../src/pt-preferences.c:189 msgid "_Close" msgstr "_Fermer" #: ../src/pt-window.c:274 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Reculer d'%d seconde" msgstr[1] "Reculer de %d secondes" #: ../src/pt-window.c:289 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "Avancer d'%d seconde" msgstr[1] "Avancer de %d seconde" #: ../src/pt-window.c:306 msgid "Pause" msgstr "Mettre en pause" #: ../src/pt-window.c:309 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Mettre en pause et reculer d'%d seconde" msgstr[1] "Mettre en pause et reculer de %d secondes" #: ../src/pt-window.c:316 msgid "Start playing" msgstr "Démarrer la lecture" #: ../src/pt-window.c:817 msgid "View follows cursor" msgstr "La vue suit le curseur" #: ../src/pt-window.c:819 msgid "Click to follow cursor" msgstr "Cliquer pour suivre le curseur" #: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 msgid "Go to ..." msgstr "Aller à..." #: ../src/resources/goto-dialog.ui.h:2 msgid "Go to position:" msgstr "Aller à la position..." #: ../src/resources/help-overlay.ui.h:1 msgid "General" msgstr "" #: ../src/resources/help-overlay.ui.h:2 msgid "Open a media file" msgstr "" #: ../src/resources/help-overlay.ui.h:3 msgid "Open recently used media files" msgstr "" #: ../src/resources/help-overlay.ui.h:4 msgid "Show/hide action menu" msgstr "" #: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 msgid "Quit" msgstr "Quitter" #: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 msgid "Waveform" msgstr "Spectre sonore" #: ../src/resources/help-overlay.ui.h:7 msgid "Zoom in" msgstr "" #: ../src/resources/help-overlay.ui.h:8 msgid "Zoom out" msgstr "" #: ../src/resources/help-overlay.ui.h:9 msgid "Open “Go to” dialog" msgstr "" #: ../src/resources/help-overlay.ui.h:10 msgid "Copy timestamp to clipboard" msgstr "" #: ../src/resources/help-overlay.ui.h:11 msgid "Go to timestamp in clipboard" msgstr "" #: ../src/resources/help-overlay.ui.h:12 ../src/resources/menus.ui.h:5 msgid "Help" msgstr "Aide" #: ../src/resources/help-overlay.ui.h:13 msgid "Show help" msgstr "" #: ../src/resources/help-overlay.ui.h:14 msgid "Show keyboard shortcuts" msgstr "" #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Ouvrir un fichier" #: ../src/resources/menus.ui.h:3 msgid "Preferences" msgstr "Préférences" #: ../src/resources/menus.ui.h:4 msgid "_Keyboard Shortcuts" msgstr "" #: ../src/resources/menus.ui.h:6 msgid "Info" msgstr "Informations" #: ../src/resources/menus.ui.h:8 msgid "Copy timestamp" msgstr "Copiez l'horodatage" #: ../src/resources/menus.ui.h:9 msgid "Insert timestamp" msgstr "Insérer un horodatage" #: ../src/resources/menus.ui.h:11 msgid "_File" msgstr "_Fichier" #: ../src/resources/menus.ui.h:12 msgid "_Edit" msgstr "_Édition" #: ../src/resources/menus.ui.h:13 msgid "_Help" msgstr "_Aide" #: ../src/resources/preferences.ui.h:1 msgid "Parlatype Preferences" msgstr "Préférences de Parlatype" #: ../src/resources/preferences.ui.h:2 msgid "_Pixels per second:" msgstr "_Pixels par seconde :" #: ../src/resources/preferences.ui.h:3 msgid "Show _time scale" msgstr "Montrer l'échelle de _temps" #. Resolution of the waveform image #: ../src/resources/preferences.ui.h:5 msgid "Resolution" msgstr "Résolution" #. A section in preferences, how to display the waveform. #: ../src/resources/preferences.ui.h:7 msgid "Display" msgstr "Affichage" #: ../src/resources/preferences.ui.h:8 msgid "_Moving cursor" msgstr "Curseur _mobile" #: ../src/resources/preferences.ui.h:9 msgid "_Fixed cursor" msgstr "Curseur _fixe" #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "Reculer à la _pause" #: ../src/resources/preferences.ui.h:12 msgid "Jump _back:" msgstr "_Reculer" #: ../src/resources/preferences.ui.h:13 msgid "Jump _forward:" msgstr "_Avançer" #: ../src/resources/preferences.ui.h:14 msgid "Controls" msgstr "Touches de contrôle" #: ../src/resources/preferences.ui.h:15 msgid "Remember _size" msgstr "" #: ../src/resources/preferences.ui.h:16 msgid "Remember _position" msgstr "Mémoriser la _position" #: ../src/resources/preferences.ui.h:17 msgid "Start on _top" msgstr "Lancer au _premier plan" #: ../src/resources/preferences.ui.h:18 msgid "Window" msgstr "Fenêtre" #: ../src/resources/window.ui.h:2 msgid "Speed:" msgstr "Vitesse :" #: ../src/resources/window-headerbar.ui.h:2 msgid "Open a file" msgstr "Ouvrir un fichier" parlatype-1.5.4/po/pt_BR.po0000644000175000017500000002016213201351432012422 00000000000000# Brazilian Portuguese translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-01-16 21:45+0100\n" "PO-Revision-Date: 2017-01-17 12:06+0000\n" "Last-Translator: André \"decko\" de Brito \n" "Language-Team: Brazilian Portuguese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2017-01-26 11:32+0000\n" "X-Generator: Launchpad (build 18315)\n" #: ../data/org.gnome.parlatype.appdata.xml.in.h:1 #: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:66 #: ../src/pt-app.c:209 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" #: ../data/org.gnome.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "Um tocador de midia para transcrição manual de voz" #: ../data/org.gnome.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" "Parlatype é um tocador de midia fácil de usar. Seu propósito é ajudar você " "a transcrever voz." #: ../data/org.gnome.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "Utilitário de transcrição" #: ../src/main.c:42 msgid "Show the application's version" msgstr "Mostrar a versão da aplicação" #: ../src/main.c:58 msgid "Fatal error" msgstr "Erro fatal" #: ../src/main.c:62 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" "Parlatype necessita de GStreamer 1.x para todar. Verifique sua instalação " "do GStreamer e tenha certeza de ter o \"Good Plugins\" instalado.\n" "Parlatype irá fechar agora, ele recebeu a seguinte mensagem de erro: %s" #. Translators: This is part of the output if you type `parlatype --help` #. in terminal. The square brackets indicate that a file (filename) is #. an optional argument for parlatype. Arguments in help output are usually #. uppercase. #: ../src/main.c:84 msgid "[FILE]" msgstr "[ARQUIVO]" #: ../src/main.c:87 msgid "Minimal audio player for manual speech transcription" msgstr "Um tocar de audio minimalista para transcrição manual de voz" #: ../src/pt-app.c:57 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Arquivos recentes" #: ../src/pt-app.c:59 ../src/pt-app.c:116 msgid "_Cancel" msgstr "_Cancelar" #: ../src/pt-app.c:60 ../src/pt-app.c:117 msgid "_Open" msgstr "_Abrir" #: ../src/pt-app.c:72 ../src/pt-app.c:128 msgid "All files" msgstr "Todos os arquivos" #: ../src/pt-app.c:113 msgid "Open Audio File" msgstr "Abrir Arquivo de Áudio" #: ../src/pt-app.c:127 msgid "Audio files" msgstr "Arquivos de áudio" #. Translators: %s is a detailed error message #: ../src/pt-app.c:176 #, c-format msgid "Error opening help: %s" msgstr "Erro abrindo a ajuda: %s" #. Translators: This is part of the about box, followed by the #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" #: ../src/pt-app.c:194 msgid "Including code from other projects:" msgstr "Incluindo código de outros projetos:" #: ../src/pt-app.c:212 msgid "A basic transcription utility" msgstr "Um utilitário basico de transcrição" #: ../src/pt-app.c:216 msgid "translator-credits" msgstr "" "André \"decko\" de Brito \n" "Launchpad Contributions:\n" " Vitor Loureiro https://launchpad.net/~hardsargent128" #: ../src/pt-app.c:369 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" msgstr "" "Atenção: Parlatype trabalha com apenas um arquivo por vez. Os outros " "arquivos serão ignorados.\n" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-goto-dialog.c:49 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is part of the Preferences dialog #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. #: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 #: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 msgid "second" msgid_plural "seconds" msgstr[0] "segundo" msgstr[1] "segundos" #: ../src/pt-preferences.c:164 msgid "_Close" msgstr "_Fechar" #: ../src/pt-window.c:218 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Voltar 1 segundo" msgstr[1] "Voltar %d segundos" #: ../src/pt-window.c:232 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "Avançar 1 segundo" msgstr[1] "Avançar %d segundos" #: ../src/pt-window.c:247 msgid "Pause" msgstr "Pausa" #: ../src/pt-window.c:250 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Pause e volte 1 segundo" msgstr[1] "Pause e volte %d segundos" #: ../src/pt-window.c:256 msgid "Start playing" msgstr "Começar a tocar" #: ../src/pt-window.c:727 msgid "View follows cursor" msgstr "Visualização segue o cursor" #: ../src/pt-window.c:729 msgid "Click to follow cursor" msgstr "Clique para seguir o cursor" #: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 msgid "Go to ..." msgstr "Ir para ..." #: ../src/resources/goto-dialog.ui.h:2 msgid "Go to position:" msgstr "Ir para a posição:" #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Abrir o Arquivo" #: ../src/resources/menus.ui.h:3 msgid "Preferences" msgstr "Preferências" #: ../src/resources/menus.ui.h:4 msgid "Help" msgstr "Ajuda" #: ../src/resources/menus.ui.h:5 msgid "Info" msgstr "Informação" #: ../src/resources/menus.ui.h:6 msgid "Quit" msgstr "Sair" #: ../src/resources/menus.ui.h:7 msgid "Copy timestamp" msgstr "Copiar timestamp" #: ../src/resources/menus.ui.h:8 msgid "Insert timestamp" msgstr "Inserir timestamp" #: ../src/resources/menus.ui.h:10 msgid "_File" msgstr "_Arquivo" #: ../src/resources/menus.ui.h:11 msgid "_Edit" msgstr "_Editar" #: ../src/resources/menus.ui.h:12 msgid "_Help" msgstr "A_juda" #: ../src/resources/preferences.ui.h:1 msgid "Parlatype Preferences" msgstr "Preferências do Parlatype" #: ../src/resources/preferences.ui.h:2 msgid "_Pixels per second:" msgstr "_Pixels por segundo:" #: ../src/resources/preferences.ui.h:3 msgid "Show _time scale" msgstr "Mostrar escala de _tempo" #. Resolution of the waveform image #: ../src/resources/preferences.ui.h:5 msgid "Resolution" msgstr "Resolução" #. A section in preferences, how to display the waveform. #: ../src/resources/preferences.ui.h:7 msgid "Display" msgstr "Visualização" #: ../src/resources/preferences.ui.h:8 msgid "_Moving cursor" msgstr "Cursor _movél" #: ../src/resources/preferences.ui.h:9 msgid "_Fixed cursor" msgstr "Cursor _fixo" #: ../src/resources/preferences.ui.h:10 msgid "Waveform" msgstr "Forma de onda" #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "Voltar quando _pausar:" #: ../src/resources/preferences.ui.h:12 msgid "Jump _back:" msgstr "Volta_r:" #: ../src/resources/preferences.ui.h:13 msgid "Jump _forward:" msgstr "A_vançar:" #: ../src/resources/preferences.ui.h:14 msgid "Controls" msgstr "Controles" #: ../src/resources/preferences.ui.h:15 msgid "Remember _position" msgstr "Lembrar _posição" #: ../src/resources/preferences.ui.h:16 msgid "Start on _top" msgstr "Iniciar no _topo" #: ../src/resources/preferences.ui.h:17 msgid "Window" msgstr "Janela" #: ../src/resources/window.ui.h:2 msgid "Speed:" msgstr "Velocidade:" #: ../src/resources/window-headerbar.ui.h:2 msgid "Open a file" msgstr "Abrir um arquivo" parlatype-1.5.4/po/en_GB.po0000644000175000017500000002256213201343606012400 00000000000000# English (United Kingdom) translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Anthony Harrington , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-07-26 18:17+0200\n" "PO-Revision-Date: 2017-10-17 18:57+0000\n" "Last-Translator: Andi Chandler \n" "Language-Team: English (United Kingdom) \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2017-11-10 15:36+0000\n" "X-Generator: Launchpad (build 18498)\n" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 #: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 #: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "Media player for manual speech transcription" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" "Parlatype is an easy to use media player. Its main purpose is to help you " "when transcribing speech." #: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "Transcription utility" #: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 msgid "Transcription;" msgstr "Transcription;" #: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 msgid "LibreOffice/Parlatype Helpers" msgstr "LibreOffice/Parlatype Helpers" #: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 msgid "Control Parlatype using LibreOffice macros" msgstr "Control Parlatype using LibreOffice macros" #: ../src/main.c:36 msgid "Fatal error" msgstr "Fatal error" #: ../src/main.c:40 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now; it received this error message: %s" #: ../src/pt-app.c:55 msgid "Show the application's version" msgstr "Show the application's version" #: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Recent Files" #: ../src/pt-app.c:77 ../src/pt-app.c:134 msgid "_Cancel" msgstr "_Cancel" #: ../src/pt-app.c:78 ../src/pt-app.c:135 msgid "_Open" msgstr "_Open" #: ../src/pt-app.c:90 ../src/pt-app.c:146 msgid "All files" msgstr "All files" #: ../src/pt-app.c:131 msgid "Open Audio File" msgstr "Open Audio File" #: ../src/pt-app.c:145 msgid "Audio files" msgstr "Audio files" #. Translators: %s is a detailed error message #: ../src/pt-app.c:202 #, c-format msgid "Error opening help: %s" msgstr "Error opening help: %s" #. Translators: This is part of the about box, followed by the #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" #: ../src/pt-app.c:220 msgid "Including code from other projects:" msgstr "Including code from other projects:" #: ../src/pt-app.c:238 msgid "A basic transcription utility" msgstr "A basic transcription utility" #: ../src/pt-app.c:242 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Andi Chandler https://launchpad.net/~bing\n" " Anthony Harrington https://launchpad.net/~untaintableangel" #: ../src/pt-app.c:424 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" msgstr "" "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-goto-dialog.c:49 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is part of the Preferences dialog #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. #: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:58 #: ../src/pt-preferences.c:68 ../src/pt-preferences.c:78 msgid "second" msgid_plural "seconds" msgstr[0] "second" msgstr[1] "seconds" #: ../src/pt-preferences.c:189 msgid "_Close" msgstr "_Close" #: ../src/pt-window.c:274 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Jump back 1 second" msgstr[1] "Jump back %d seconds" #: ../src/pt-window.c:289 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "Jump forward 1 second" msgstr[1] "Jump forward %d seconds" #: ../src/pt-window.c:306 msgid "Pause" msgstr "Pause" #: ../src/pt-window.c:309 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Pause and rewind 1 second" msgstr[1] "Pause and rewind %d seconds" #: ../src/pt-window.c:316 msgid "Start playing" msgstr "Start playing" #: ../src/pt-window.c:817 msgid "View follows cursor" msgstr "View follows cursor" #: ../src/pt-window.c:819 msgid "Click to follow cursor" msgstr "Click to follow cursor" #: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 msgid "Go to ..." msgstr "Go to..." #: ../src/resources/goto-dialog.ui.h:2 msgid "Go to position:" msgstr "Go to position:" #: ../src/resources/help-overlay.ui.h:1 msgid "General" msgstr "General" #: ../src/resources/help-overlay.ui.h:2 msgid "Open a media file" msgstr "Open a media file" #: ../src/resources/help-overlay.ui.h:3 msgid "Open recently used media files" msgstr "Open recently used media files" #: ../src/resources/help-overlay.ui.h:4 msgid "Show/hide action menu" msgstr "Show/hide action menu" #: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 msgid "Quit" msgstr "Quit" #: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 msgid "Waveform" msgstr "Waveform" #: ../src/resources/help-overlay.ui.h:7 msgid "Zoom in" msgstr "Zoom in" #: ../src/resources/help-overlay.ui.h:8 msgid "Zoom out" msgstr "Zoom out" #: ../src/resources/help-overlay.ui.h:9 msgid "Open “Go to” dialog" msgstr "Open “Go to” dialogue" #: ../src/resources/help-overlay.ui.h:10 msgid "Copy timestamp to clipboard" msgstr "Copy timestamp to clipboard" #: ../src/resources/help-overlay.ui.h:11 msgid "Go to timestamp in clipboard" msgstr "Go to timestamp in clipboard" #: ../src/resources/help-overlay.ui.h:12 ../src/resources/menus.ui.h:5 msgid "Help" msgstr "Help" #: ../src/resources/help-overlay.ui.h:13 msgid "Show help" msgstr "Show help" #: ../src/resources/help-overlay.ui.h:14 msgid "Show keyboard shortcuts" msgstr "Show keyboard shortcuts" #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Open File" #: ../src/resources/menus.ui.h:3 msgid "Preferences" msgstr "Preferences" #: ../src/resources/menus.ui.h:4 msgid "_Keyboard Shortcuts" msgstr "_Keyboard Shortcuts" #: ../src/resources/menus.ui.h:6 msgid "Info" msgstr "Info" #: ../src/resources/menus.ui.h:8 msgid "Copy timestamp" msgstr "Copy timestamp" #: ../src/resources/menus.ui.h:9 msgid "Insert timestamp" msgstr "Insert timestamp" #: ../src/resources/menus.ui.h:11 msgid "_File" msgstr "_File" #: ../src/resources/menus.ui.h:12 msgid "_Edit" msgstr "_Edit" #: ../src/resources/menus.ui.h:13 msgid "_Help" msgstr "_Help" #: ../src/resources/preferences.ui.h:1 msgid "Parlatype Preferences" msgstr "Parlatype Preferences" #: ../src/resources/preferences.ui.h:2 msgid "_Pixels per second:" msgstr "_Pixels per second:" #: ../src/resources/preferences.ui.h:3 msgid "Show _time scale" msgstr "Show _time scale" #. Resolution of the waveform image #: ../src/resources/preferences.ui.h:5 msgid "Resolution" msgstr "Resolution" #. A section in preferences, how to display the waveform. #: ../src/resources/preferences.ui.h:7 msgid "Display" msgstr "Display" #: ../src/resources/preferences.ui.h:8 msgid "_Moving cursor" msgstr "_Moving cursor" #: ../src/resources/preferences.ui.h:9 msgid "_Fixed cursor" msgstr "_Fixed cursor" #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "Jump back on _pause:" #: ../src/resources/preferences.ui.h:12 msgid "Jump _back:" msgstr "Jump _back:" #: ../src/resources/preferences.ui.h:13 msgid "Jump _forward:" msgstr "Jump _forward:" #: ../src/resources/preferences.ui.h:14 msgid "Controls" msgstr "Controls" #: ../src/resources/preferences.ui.h:15 msgid "Remember _size" msgstr "Remember _size" #: ../src/resources/preferences.ui.h:16 msgid "Remember _position" msgstr "Remember _position" #: ../src/resources/preferences.ui.h:17 msgid "Start on _top" msgstr "Start on _top" #: ../src/resources/preferences.ui.h:18 msgid "Window" msgstr "Window" #: ../src/resources/window.ui.h:2 msgid "Speed:" msgstr "Speed:" #: ../src/resources/window-headerbar.ui.h:2 msgid "Open a file" msgstr "Open a file" parlatype-1.5.4/po/de.po0000644000175000017500000002415013176574165012032 00000000000000# German translations for parlatype. # Copyright (C) 2016 Gabor Karsay # This file is distributed under the same license as the parlatype package. # Gabor Karsay , 2016, 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-07-26 17:29+0200\n" "PO-Revision-Date: 2017-07-26 17:29+0200\n" "Last-Translator: Gabor Karsay \n" "Language-Team: Deutsch <>\n" "Language: de\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Gtranslator 2.91.7\n" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 #: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 #: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "Medienwiedergabe für manuelle Sprachtranskription" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" "Parlatype ist ein einfach zu bedienender Medienspieler. Er dient " "hauptsächlich dazu, Sie beim Transkribieren von gesprochener Sprache zu " "unterstützen." #: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "Transkriptions-Helfer" #: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 msgid "Transcription;" msgstr "Transkription;" #: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 msgid "LibreOffice/Parlatype Helpers" msgstr "LibreOffice/Parlatype-Helfer" #: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 msgid "Control Parlatype using LibreOffice macros" msgstr "Parlatype mit Hilfe von LibreOffice-Makros bedienen" #: ../src/main.c:36 msgid "Fatal error" msgstr "Schwerer Fehler" #: ../src/main.c:40 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" "Parlatype braucht GStreamer 1.x, um zu funktionieren. Bitte überprüfen Sie " "Ihre GStreamer-Installation und stellen Sie sicher, dass auch die »Guten " "Plugins« (Good Plugins) installiert sind.\n" "Parlatype wird nun beendet, es hat folgende Fehlermeldung erhalten: %s" #: ../src/pt-app.c:55 msgid "Show the application's version" msgstr "Version der Anwendung anzeigen" #: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Zuletzt geöffnete Dateien" #: ../src/pt-app.c:77 ../src/pt-app.c:134 msgid "_Cancel" msgstr "_Abbrechen" #: ../src/pt-app.c:78 ../src/pt-app.c:135 msgid "_Open" msgstr "_Öffnen" #: ../src/pt-app.c:90 ../src/pt-app.c:146 msgid "All files" msgstr "Alle Dateien" #: ../src/pt-app.c:131 msgid "Open Audio File" msgstr "Audio-Datei öffnen" #: ../src/pt-app.c:145 msgid "Audio files" msgstr "Audio-Dateien" #. Translators: %s is a detailed error message #: ../src/pt-app.c:202 #, c-format msgid "Error opening help: %s" msgstr "Fehler beim Öffnen der Hilfe: %s" #. Translators: This is part of the about box, followed by the #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" #: ../src/pt-app.c:220 msgid "Including code from other projects:" msgstr "Aus anderen Projekten übernommener Code:" #: ../src/pt-app.c:238 msgid "A basic transcription utility" msgstr "Ein einfaches Transkriptionsprogramm" #: ../src/pt-app.c:242 msgid "translator-credits" msgstr "Gabor Karsay " #: ../src/pt-app.c:416 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" msgstr "" "Warnung: Parlatype öffnet nur eine Datei auf einmal. Weitere Dateien werden " "ignoriert.\n" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-goto-dialog.c:49 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is part of the Preferences dialog #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. #: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:58 #: ../src/pt-preferences.c:68 ../src/pt-preferences.c:78 msgid "second" msgid_plural "seconds" msgstr[0] "Sekunde" msgstr[1] "Sekunden" #: ../src/pt-preferences.c:189 msgid "_Close" msgstr "_Schließen" #: ../src/pt-window.c:274 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Eine Sekunde zurückspringen" msgstr[1] "%d Sekunden zurückspringen" #: ../src/pt-window.c:289 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "1 Sekunde vorwärtsspringen" msgstr[1] "%d Sekunden vorwärtsspringen" #: ../src/pt-window.c:306 msgid "Pause" msgstr "Wiedergabe unterbrechen" #: ../src/pt-window.c:309 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Wiedergabe unterbrechen und 1 Sekunde zurückspulen" msgstr[1] "Wiedergabe unterbrechen und %d Sekunden zurückspulen" #: ../src/pt-window.c:316 msgid "Start playing" msgstr "Wiedergabe starten" #: ../src/pt-window.c:817 msgid "View follows cursor" msgstr "Ansicht folgt dem Cursor" #: ../src/pt-window.c:819 msgid "Click to follow cursor" msgstr "Klicken Sie hier, um dem Cursor zu folgen" #: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 msgid "Go to ..." msgstr "Gehe zu …" #: ../src/resources/goto-dialog.ui.h:2 msgid "Go to position:" msgstr "Gehe zu Position:" #: ../src/resources/help-overlay.ui.h:1 msgid "General" msgstr "Allgemein" #: ../src/resources/help-overlay.ui.h:2 msgid "Open a media file" msgstr "Eine Mediendatei öffnen" #: ../src/resources/help-overlay.ui.h:3 msgid "Open recently used media files" msgstr "Zuletzt benutzte Mediendateien öffnen" #: ../src/resources/help-overlay.ui.h:4 msgid "Show/hide action menu" msgstr "Aktionsmenü anzeigen/verbergen" #: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 msgid "Quit" msgstr "Beenden" #: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 msgid "Waveform" msgstr "Wellenform" #: ../src/resources/help-overlay.ui.h:7 msgid "Open “Go to” dialog" msgstr "»Gehe zu«-Dialog öffnen" #: ../src/resources/help-overlay.ui.h:8 msgid "Zoom in" msgstr "Hineinzoomen" #: ../src/resources/help-overlay.ui.h:9 msgid "Zoom out" msgstr "Hinauszoomen" #: ../src/resources/help-overlay.ui.h:10 msgid "Copy timestamp to clipboard" msgstr "Zeitstempel in die Zwischenablage kopieren" #: ../src/resources/help-overlay.ui.h:11 msgid "Go to timestamp in clipboard" msgstr "Zu Zeitstempel aus Zwischenablage gehen" #: ../src/resources/help-overlay.ui.h:12 ../src/resources/menus.ui.h:5 msgid "Help" msgstr "Hilfe" #: ../src/resources/help-overlay.ui.h:13 msgid "Show help" msgstr "Hilfe anzeigen" #: ../src/resources/help-overlay.ui.h:14 msgid "Show keyboard shortcuts" msgstr "Tastenkürzel anzeigen" #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Datei öffnen" #: ../src/resources/menus.ui.h:3 msgid "Preferences" msgstr "Einstellungen" #: ../src/resources/menus.ui.h:4 msgid "_Keyboard Shortcuts" msgstr "_Tastenkürzel" #: ../src/resources/menus.ui.h:6 msgid "Info" msgstr "Info" #: ../src/resources/menus.ui.h:8 msgid "Copy timestamp" msgstr "Zeitstempel kopieren" #: ../src/resources/menus.ui.h:9 msgid "Insert timestamp" msgstr "Zeitstempel einfügen" #: ../src/resources/menus.ui.h:11 msgid "_File" msgstr "_Datei" #: ../src/resources/menus.ui.h:12 msgid "_Edit" msgstr "_Bearbeiten" #: ../src/resources/menus.ui.h:13 msgid "_Help" msgstr "_Hilfe" #: ../src/resources/preferences.ui.h:1 msgid "Parlatype Preferences" msgstr "Einstellungen für Parlatype" #: ../src/resources/preferences.ui.h:2 msgid "_Pixels per second:" msgstr "_Pixel pro Sekunde:" #: ../src/resources/preferences.ui.h:3 msgid "Show _time scale" msgstr "_Zeitskala anzeigen" #. Resolution of the waveform image #: ../src/resources/preferences.ui.h:5 msgid "Resolution" msgstr "Auflösung" #. A section in preferences, how to display the waveform. #: ../src/resources/preferences.ui.h:7 msgid "Display" msgstr "Anzeige" #: ../src/resources/preferences.ui.h:8 msgid "_Moving cursor" msgstr "Cursor _bewegt sich" #: ../src/resources/preferences.ui.h:9 msgid "_Fixed cursor" msgstr "Cursor ist _fixiert" #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "Bei _Pause zurückspulen:" #: ../src/resources/preferences.ui.h:12 msgid "Jump _back:" msgstr "_Zurückspringen:" #: ../src/resources/preferences.ui.h:13 msgid "Jump _forward:" msgstr "_Vorwärts springen:" #: ../src/resources/preferences.ui.h:14 msgid "Controls" msgstr "Steuerung" #: ../src/resources/preferences.ui.h:15 msgid "Remember _size" msgstr "_Größe des Fensters merken" #: ../src/resources/preferences.ui.h:16 msgid "Remember _position" msgstr "_Position des Fensters merken" #: ../src/resources/preferences.ui.h:17 msgid "Start on _top" msgstr "»Immer im _Vordergrund« starten" #: ../src/resources/preferences.ui.h:18 msgid "Window" msgstr "Fenster" #: ../src/resources/window.ui.h:2 msgid "Speed:" msgstr "Geschwindigkeit:" #: ../src/resources/window-headerbar.ui.h:2 msgid "Open a file" msgstr "Eine Datei öffnen" #, fuzzy #~ msgid "Open a document" #~ msgstr "Eine Datei öffnen" #, fuzzy #~ msgid "Open menu" #~ msgstr "Datei öffnen" #~ msgid "Open the application manual" #~ msgstr "Das Handbuch zu dieser Anwendung öffnen" #~ msgid "[FILE]" #~ msgstr "[DATEI]" #~ msgid "Minimal audio player for manual speech transcription" #~ msgstr "Einfache Audiowiedergabe für manuelle Sprachtranskription" #~ msgid "seconds" #~ msgstr "Sekunden" parlatype-1.5.4/po/es.po0000644000175000017500000002325313201343607012034 00000000000000# Spanish translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # VPablo , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-07-26 18:17+0200\n" "PO-Revision-Date: 2017-11-09 13:00+0000\n" "Last-Translator: Jorge Toledo \n" "Language-Team: Spanish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2017-11-10 15:36+0000\n" "X-Generator: Launchpad (build 18498)\n" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 #: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 #: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "Reproductor de medios para la transcripción de voz manual" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" "Parlatype es un reproductor de medios fácil de usar. Su principal propósito " "es ayudar a transcribir grabaciones de voz." #: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "Utilidad de transcripción" #: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 msgid "Transcription;" msgstr "Transcripción;" #: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 msgid "LibreOffice/Parlatype Helpers" msgstr "Auxiliares de LibreOffice/Parlatype" #: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 msgid "Control Parlatype using LibreOffice macros" msgstr "Controle Parlatype a través de macros de LibreOffice" #: ../src/main.c:36 msgid "Fatal error" msgstr "Error grave" #: ../src/main.c:40 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" "Parlatype necesita GStreamer 1.x para funcionar. Por favor compruebe su " "instalación de GStreamer i asegúrese que el \"Good plugins\" está " "instalado.\n" "Parlatype saldrá ahora, ha recibido el siguiente mensaje: %s" #: ../src/pt-app.c:55 msgid "Show the application's version" msgstr "Mostrar la versión de la aplicación" #: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Archivos recientes" #: ../src/pt-app.c:77 ../src/pt-app.c:134 msgid "_Cancel" msgstr "_Cancelar" #: ../src/pt-app.c:78 ../src/pt-app.c:135 msgid "_Open" msgstr "_Abrir" #: ../src/pt-app.c:90 ../src/pt-app.c:146 msgid "All files" msgstr "Todos los archivos" #: ../src/pt-app.c:131 msgid "Open Audio File" msgstr "Abrir archivo de audio" #: ../src/pt-app.c:145 msgid "Audio files" msgstr "Archivos de audio" #. Translators: %s is a detailed error message #: ../src/pt-app.c:202 #, c-format msgid "Error opening help: %s" msgstr "Error abriendo ayuda: %s" #. Translators: This is part of the about box, followed by the #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" #: ../src/pt-app.c:220 msgid "Including code from other projects:" msgstr "Incluye código de otros proyectos:" #: ../src/pt-app.c:238 msgid "A basic transcription utility" msgstr "Una utilidad básica de transcripción" #: ../src/pt-app.c:242 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Adolfo Jayme https://launchpad.net/~fitojb\n" " Jorge Toledo https://launchpad.net/~eldelacajita\n" " VPablo https://launchpad.net/~villumar" #: ../src/pt-app.c:424 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" msgstr "" "Aviso: Parlatype carga solamente un fichero a la vez. Los otros se ignoran.\n" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-goto-dialog.c:49 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is part of the Preferences dialog #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. #: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:58 #: ../src/pt-preferences.c:68 ../src/pt-preferences.c:78 msgid "second" msgid_plural "seconds" msgstr[0] "segundo" msgstr[1] "segundos" #: ../src/pt-preferences.c:189 msgid "_Close" msgstr "_Cerrar" #: ../src/pt-window.c:274 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Vuelve 1 segundo atrás" msgstr[1] "Vuelve %d segundos atrás" #: ../src/pt-window.c:289 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "Avanza 1 segundo" msgstr[1] "Avanza %d segundos" #: ../src/pt-window.c:306 msgid "Pause" msgstr "Pausa" #: ../src/pt-window.c:309 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Pausa y rebobina 1 segundo" msgstr[1] "Pausa y rebobina %d segundos" #: ../src/pt-window.c:316 msgid "Start playing" msgstr "Iniciar la reproducción" #: ../src/pt-window.c:817 msgid "View follows cursor" msgstr "La vista sigue al cursor" #: ../src/pt-window.c:819 msgid "Click to follow cursor" msgstr "Click para seguir al cursor" #: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 msgid "Go to ..." msgstr "Ir a ..." #: ../src/resources/goto-dialog.ui.h:2 msgid "Go to position:" msgstr "Ir a la posición:" #: ../src/resources/help-overlay.ui.h:1 msgid "General" msgstr "General" #: ../src/resources/help-overlay.ui.h:2 msgid "Open a media file" msgstr "Abrir archivo multimedia" #: ../src/resources/help-overlay.ui.h:3 msgid "Open recently used media files" msgstr "Abrir archivos usados recientemente" #: ../src/resources/help-overlay.ui.h:4 msgid "Show/hide action menu" msgstr "Mostrar u ocultar el menú de acciones" #: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 msgid "Quit" msgstr "Salir" #: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 msgid "Waveform" msgstr "Forma de onda" #: ../src/resources/help-overlay.ui.h:7 msgid "Zoom in" msgstr "Ampliar" #: ../src/resources/help-overlay.ui.h:8 msgid "Zoom out" msgstr "Reducir" #: ../src/resources/help-overlay.ui.h:9 msgid "Open “Go to” dialog" msgstr "Abrir el cuadro de diálogo «Ir a»" #: ../src/resources/help-overlay.ui.h:10 msgid "Copy timestamp to clipboard" msgstr "Copiar marca de tiempo al portapapeles" #: ../src/resources/help-overlay.ui.h:11 msgid "Go to timestamp in clipboard" msgstr "Ir a la marca de tiempo copiada en el portapapeles" #: ../src/resources/help-overlay.ui.h:12 ../src/resources/menus.ui.h:5 msgid "Help" msgstr "Ayuda" #: ../src/resources/help-overlay.ui.h:13 msgid "Show help" msgstr "Mostrar la ayuda" #: ../src/resources/help-overlay.ui.h:14 msgid "Show keyboard shortcuts" msgstr "Mostrar atajos de teclado" #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Abrir archivo" #: ../src/resources/menus.ui.h:3 msgid "Preferences" msgstr "Preferencias" #: ../src/resources/menus.ui.h:4 msgid "_Keyboard Shortcuts" msgstr "Atajos de teclado" #: ../src/resources/menus.ui.h:6 msgid "Info" msgstr "Info" #: ../src/resources/menus.ui.h:8 msgid "Copy timestamp" msgstr "Copiar marca de tiempo" #: ../src/resources/menus.ui.h:9 msgid "Insert timestamp" msgstr "Insertar marca de tiempo" #: ../src/resources/menus.ui.h:11 msgid "_File" msgstr "_Archivo" #: ../src/resources/menus.ui.h:12 msgid "_Edit" msgstr "_Editar" #: ../src/resources/menus.ui.h:13 msgid "_Help" msgstr "_Ayuda" #: ../src/resources/preferences.ui.h:1 msgid "Parlatype Preferences" msgstr "Preferencias de Parlatype" #: ../src/resources/preferences.ui.h:2 msgid "_Pixels per second:" msgstr "_Píxeles por segundo:" #: ../src/resources/preferences.ui.h:3 msgid "Show _time scale" msgstr "Muestra escala de _tiempo" #. Resolution of the waveform image #: ../src/resources/preferences.ui.h:5 msgid "Resolution" msgstr "Resolución" #. A section in preferences, how to display the waveform. #: ../src/resources/preferences.ui.h:7 msgid "Display" msgstr "Visualizar" #: ../src/resources/preferences.ui.h:8 msgid "_Moving cursor" msgstr "Cursor _móvil" #: ../src/resources/preferences.ui.h:9 msgid "_Fixed cursor" msgstr "Cursor _fijo" #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "Vuelve atrás en la _pausa:" #: ../src/resources/preferences.ui.h:12 msgid "Jump _back:" msgstr "Vuelve atrás (_b):" #: ../src/resources/preferences.ui.h:13 msgid "Jump _forward:" msgstr "Avanza (_f):" #: ../src/resources/preferences.ui.h:14 msgid "Controls" msgstr "Controles" #: ../src/resources/preferences.ui.h:15 msgid "Remember _size" msgstr "Recordar el _tamaño" #: ../src/resources/preferences.ui.h:16 msgid "Remember _position" msgstr "Recordar la _posición" #: ../src/resources/preferences.ui.h:17 msgid "Start on _top" msgstr "Iniciar _encima del resto de ventanas" #: ../src/resources/preferences.ui.h:18 msgid "Window" msgstr "Ventana" #: ../src/resources/window.ui.h:2 msgid "Speed:" msgstr "Velocidad:" #: ../src/resources/window-headerbar.ui.h:2 msgid "Open a file" msgstr "Abrir archivo" parlatype-1.5.4/po/Makevars0000644000175000017500000000653413176574165012604 00000000000000# Makefile variables for PO directory in any package using GNU gettext. # Usually the message domain is the same as the package name. DOMAIN = $(PACKAGE) # These two variables depend on the location of this directory. subdir = po top_builddir = .. # These options get passed to xgettext. XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ --keyword=C_:1c,2 # This is the copyright holder that gets inserted into the header of the # $(DOMAIN).pot file. Set this to the copyright holder of the surrounding # package. (Note that the msgstr strings, extracted from the package's # sources, belong to the copyright holder of the package.) Translators are # expected to transfer the copyright for their translations to this person # or entity, or to disclaim their copyright. The empty string stands for # the public domain; in this case the translators are expected to disclaim # their copyright. COPYRIGHT_HOLDER = Gabor Karsay # This tells whether or not to prepend "GNU " prefix to the package # name that gets inserted into the header of the $(DOMAIN).pot file. # Possible values are "yes", "no", or empty. If it is empty, try to # detect it automatically by scanning the files in $(top_srcdir) for # "GNU packagename" string. PACKAGE_GNU = # This is the email address or URL to which the translators shall report # bugs in the untranslated strings: # - Strings which are not entire sentences, see the maintainer guidelines # in the GNU gettext documentation, section 'Preparing Strings'. # - Strings which use unclear terms or require additional context to be # understood. # - Strings which make invalid assumptions about notation of date, time or # money. # - Pluralisation problems. # - Incorrect English spelling. # - Incorrect formatting. # It can be your email address, or a mailing list address where translators # can write to without being subscribed, or the URL of a web page through # which the translators can contact you. MSGID_BUGS_ADDRESS = https://github.com/gkarsay/parlatype/issues # This is the list of locale categories, beyond LC_MESSAGES, for which the # message catalogs shall be used. It is usually empty. EXTRA_LOCALE_CATEGORIES = # This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt' # context. Possible values are "yes" and "no". Set this to yes if the # package uses functions taking also a message context, like pgettext(), or # if in $(XGETTEXT_OPTIONS) you define keywords with a context argument. USE_MSGCTXT = no # These options get passed to msgmerge. # Useful options are in particular: # --previous to keep previous msgids of translated messages, # --quiet to reduce the verbosity. MSGMERGE_OPTIONS = # These options get passed to msginit. # If you want to disable line wrapping when writing PO files, add # --no-wrap to MSGMERGE_OPTIONS, XGETTEXT_OPTIONS, and # MSGINIT_OPTIONS. MSGINIT_OPTIONS = # This tells whether or not to regenerate a PO file when $(DOMAIN).pot # has changed. Possible values are "yes" and "no". Set this to no if # the POT file is checked in the repository and the version control # program ignores timestamps. PO_DEPENDS_ON_POT = yes # This tells whether or not to forcibly update $(DOMAIN).pot and # regenerate PO files on "make dist". Possible values are "yes" and # "no". Set this to no if the POT file and PO files are maintained # externally. DIST_DEPENDS_ON_UPDATE_PO = yes parlatype-1.5.4/po/ku.po0000644000175000017500000001551613176574165012067 00000000000000# Kurdish translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Rokar ✌ , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-01-16 21:45+0100\n" "PO-Revision-Date: 2017-02-15 09:08+0000\n" "Last-Translator: Rokar ✌ \n" "Language-Team: Kurdish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2017-03-13 15:08+0000\n" "X-Generator: Launchpad (build 18331)\n" #: ../data/org.gnome.parlatype.appdata.xml.in.h:1 #: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:66 #: ../src/pt-app.c:209 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "" #: ../data/org.gnome.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "" #: ../data/org.gnome.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" #: ../data/org.gnome.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "" #: ../src/main.c:42 msgid "Show the application's version" msgstr "" #: ../src/main.c:58 msgid "Fatal error" msgstr "" #: ../src/main.c:62 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" #. Translators: This is part of the output if you type `parlatype --help` #. in terminal. The square brackets indicate that a file (filename) is #. an optional argument for parlatype. Arguments in help output are usually #. uppercase. #: ../src/main.c:84 msgid "[FILE]" msgstr "[PEL]" #: ../src/main.c:87 msgid "Minimal audio player for manual speech transcription" msgstr "" #: ../src/pt-app.c:57 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Pelên borî" #: ../src/pt-app.c:59 ../src/pt-app.c:116 msgid "_Cancel" msgstr "_Betal" #: ../src/pt-app.c:60 ../src/pt-app.c:117 msgid "_Open" msgstr "_Veke" #: ../src/pt-app.c:72 ../src/pt-app.c:128 msgid "All files" msgstr "Hemû pelan" #: ../src/pt-app.c:113 msgid "Open Audio File" msgstr "" #: ../src/pt-app.c:127 msgid "Audio files" msgstr "Pelên Dengê" #. Translators: %s is a detailed error message #: ../src/pt-app.c:176 #, c-format msgid "Error opening help: %s" msgstr "" #. Translators: This is part of the about box, followed by the #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" #: ../src/pt-app.c:194 msgid "Including code from other projects:" msgstr "" #: ../src/pt-app.c:212 msgid "A basic transcription utility" msgstr "" #: ../src/pt-app.c:216 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Rokar ✌ https://launchpad.net/~rokarali" #: ../src/pt-app.c:369 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" msgstr "" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-goto-dialog.c:49 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is part of the Preferences dialog #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. #: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 #: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 msgid "second" msgid_plural "seconds" msgstr[0] "çirke" msgstr[1] "çirke" #: ../src/pt-preferences.c:164 msgid "_Close" msgstr "_Bigire" #: ../src/pt-window.c:218 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "" msgstr[1] "" #: ../src/pt-window.c:232 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "" msgstr[1] "" #: ../src/pt-window.c:247 msgid "Pause" msgstr "Raweste" #: ../src/pt-window.c:250 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "" msgstr[1] "" #: ../src/pt-window.c:256 msgid "Start playing" msgstr "" #: ../src/pt-window.c:727 msgid "View follows cursor" msgstr "" #: ../src/pt-window.c:729 msgid "Click to follow cursor" msgstr "" #: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 msgid "Go to ..." msgstr "" #: ../src/resources/goto-dialog.ui.h:2 msgid "Go to position:" msgstr "" #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Pelê Veke" #: ../src/resources/menus.ui.h:3 msgid "Preferences" msgstr "Vebijêrk" #: ../src/resources/menus.ui.h:4 msgid "Help" msgstr "Alîkarî" #: ../src/resources/menus.ui.h:5 msgid "Info" msgstr "Agahî" #: ../src/resources/menus.ui.h:6 msgid "Quit" msgstr "Derkeve" #: ../src/resources/menus.ui.h:7 msgid "Copy timestamp" msgstr "" #: ../src/resources/menus.ui.h:8 msgid "Insert timestamp" msgstr "" #: ../src/resources/menus.ui.h:10 msgid "_File" msgstr "_Pel" #: ../src/resources/menus.ui.h:11 msgid "_Edit" msgstr "_Biguherîne" #: ../src/resources/menus.ui.h:12 msgid "_Help" msgstr "_Alîkarî" #: ../src/resources/preferences.ui.h:1 msgid "Parlatype Preferences" msgstr "" #: ../src/resources/preferences.ui.h:2 msgid "_Pixels per second:" msgstr "" #: ../src/resources/preferences.ui.h:3 msgid "Show _time scale" msgstr "" #. Resolution of the waveform image #: ../src/resources/preferences.ui.h:5 msgid "Resolution" msgstr "Rêjeşane" #. A section in preferences, how to display the waveform. #: ../src/resources/preferences.ui.h:7 msgid "Display" msgstr "Nîşandan" #: ../src/resources/preferences.ui.h:8 msgid "_Moving cursor" msgstr "" #: ../src/resources/preferences.ui.h:9 msgid "_Fixed cursor" msgstr "" #: ../src/resources/preferences.ui.h:10 msgid "Waveform" msgstr "" #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "" #: ../src/resources/preferences.ui.h:12 msgid "Jump _back:" msgstr "" #: ../src/resources/preferences.ui.h:13 msgid "Jump _forward:" msgstr "" #: ../src/resources/preferences.ui.h:14 msgid "Controls" msgstr "Kontrolkirin" #: ../src/resources/preferences.ui.h:15 msgid "Remember _position" msgstr "" #: ../src/resources/preferences.ui.h:16 msgid "Start on _top" msgstr "" #: ../src/resources/preferences.ui.h:17 msgid "Window" msgstr "Pencere" #: ../src/resources/window.ui.h:2 msgid "Speed:" msgstr "Lez:" #: ../src/resources/window-headerbar.ui.h:2 msgid "Open a file" msgstr "Dosiyekê veke" parlatype-1.5.4/po/nl.po0000644000175000017500000002012713176574165012053 00000000000000# Dutch translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Heimen Stoffels , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-04-18 20:55+0200\n" "PO-Revision-Date: 2017-06-26 09:33+0000\n" "Last-Translator: Heimen Stoffels \n" "Language-Team: Dutch \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2017-06-29 09:44+0000\n" "X-Generator: Launchpad (build 18418)\n" #: ../data/org.gnome.parlatype.appdata.xml.in.h:1 #: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:65 #: ../src/pt-app.c:216 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" #: ../data/org.gnome.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "Mediaspeler voor handmatige spraaktranscriptie" #: ../data/org.gnome.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" "Parlatype is een eenvoudig te gebruiken mediaspeler. Het hoofddoel is om te " "helpen bij het transcriberen van spraak." #: ../data/org.gnome.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "Transcriptiehulpmiddel" #: ../src/main.c:43 msgid "Show the application's version" msgstr "Applicatieversie weergeven" #: ../src/main.c:59 msgid "Fatal error" msgstr "Fatale fout" #: ../src/main.c:63 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" "Parlatype heeft GStreamer 1.x nodig om te kunnen starten. Controleer uw " "installatie en zorg ervoor dat u de \"Good Plugins\" heeft geïnstalleerd. " "Parlatype wordt nu afgesloten met deze foutmelding: %s" #. Translators: This is part of the output if you type `parlatype --help` #. in terminal. The square brackets indicate that a file (filename) is #. an optional argument for parlatype. Arguments in help output are usually #. uppercase. #: ../src/main.c:87 msgid "[FILE]" msgstr "[BESTAND]" #: ../src/main.c:90 msgid "Minimal audio player for manual speech transcription" msgstr "Minimale audiospeler voor handmatige spraaktranscriptie" #: ../src/pt-app.c:56 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Recente bestanden" #: ../src/pt-app.c:58 ../src/pt-app.c:115 msgid "_Cancel" msgstr "_Annuleren" #: ../src/pt-app.c:59 ../src/pt-app.c:116 msgid "_Open" msgstr "_Openen" #: ../src/pt-app.c:71 ../src/pt-app.c:127 msgid "All files" msgstr "Alle bestanden" #: ../src/pt-app.c:112 msgid "Open Audio File" msgstr "Audiobestand openen" #: ../src/pt-app.c:126 msgid "Audio files" msgstr "Audiobestanden" #. Translators: %s is a detailed error message #: ../src/pt-app.c:183 #, c-format msgid "Error opening help: %s" msgstr "Fout bij openen van hulp: %s" #. Translators: This is part of the about box, followed by the #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" #: ../src/pt-app.c:201 msgid "Including code from other projects:" msgstr "Inclusief code van andere projecten:" #: ../src/pt-app.c:219 msgid "A basic transcription utility" msgstr "Een basis-transcriptiehulpmiddel" #: ../src/pt-app.c:223 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Heimen Stoffels https://launchpad.net/~vistaus" #: ../src/pt-app.c:394 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" msgstr "" "Waarschuwing: Parlatype kan slechts één bestand tegelijk aan. Andere " "bestanden worden genegeerd.\n" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-goto-dialog.c:49 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is part of the Preferences dialog #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. #: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 #: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 msgid "second" msgid_plural "seconds" msgstr[0] "seconde" msgstr[1] "seconden" #: ../src/pt-preferences.c:169 msgid "_Close" msgstr "_Sluiten" #: ../src/pt-window.c:273 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "1 seconde terugspoelen" msgstr[1] "%d seconden terugspoelen" #: ../src/pt-window.c:288 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "1 seconde vooruitspoelen" msgstr[1] "$d seconden vooruitspoelen" #: ../src/pt-window.c:305 msgid "Pause" msgstr "Pauzeren" #: ../src/pt-window.c:308 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Pauzeren en 1 seconde terugspoelen" msgstr[1] "Pauzeren en %d seconden terugspoelen" #: ../src/pt-window.c:315 msgid "Start playing" msgstr "Afspelen starten" #: ../src/pt-window.c:804 msgid "View follows cursor" msgstr "Weergave volgt cursor" #: ../src/pt-window.c:806 msgid "Click to follow cursor" msgstr "Klik om cursor te volgen" #: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 msgid "Go to ..." msgstr "Ga naar ..." #: ../src/resources/goto-dialog.ui.h:2 msgid "Go to position:" msgstr "Ga naar positie:" #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Bestand openen" #: ../src/resources/menus.ui.h:3 msgid "Preferences" msgstr "Voorkeuren" #: ../src/resources/menus.ui.h:4 msgid "Help" msgstr "Hulp" #: ../src/resources/menus.ui.h:5 msgid "Info" msgstr "Informatie" #: ../src/resources/menus.ui.h:6 msgid "Quit" msgstr "Afsluiten" #: ../src/resources/menus.ui.h:7 msgid "Copy timestamp" msgstr "Tijdstempel kopiëren" #: ../src/resources/menus.ui.h:8 msgid "Insert timestamp" msgstr "Tijdstempel invoegen" #: ../src/resources/menus.ui.h:10 msgid "_File" msgstr "_Bestand" #: ../src/resources/menus.ui.h:11 msgid "_Edit" msgstr "_Bewerken" #: ../src/resources/menus.ui.h:12 msgid "_Help" msgstr "_Hulp" #: ../src/resources/preferences.ui.h:1 msgid "Parlatype Preferences" msgstr "Parlatype-voorkeuren" #: ../src/resources/preferences.ui.h:2 msgid "_Pixels per second:" msgstr "_Pixels per seconde:" #: ../src/resources/preferences.ui.h:3 msgid "Show _time scale" msgstr "_Tijdschaal weergeven" #. Resolution of the waveform image #: ../src/resources/preferences.ui.h:5 msgid "Resolution" msgstr "Resolutie" #. A section in preferences, how to display the waveform. #: ../src/resources/preferences.ui.h:7 msgid "Display" msgstr "Weergave" #: ../src/resources/preferences.ui.h:8 msgid "_Moving cursor" msgstr "Be_wegende cursor" #: ../src/resources/preferences.ui.h:9 msgid "_Fixed cursor" msgstr "_Vastgezette cursor" #: ../src/resources/preferences.ui.h:10 msgid "Waveform" msgstr "Golfvorm" #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "Terugspoelen bij _pauzeren:" #: ../src/resources/preferences.ui.h:12 msgid "Jump _back:" msgstr "_Terugspoelen" #: ../src/resources/preferences.ui.h:13 msgid "Jump _forward:" msgstr "_Vooruitspoelen:" #: ../src/resources/preferences.ui.h:14 msgid "Controls" msgstr "Bediening" #: ../src/resources/preferences.ui.h:15 msgid "Remember _position" msgstr "_Positie onthouden" #: ../src/resources/preferences.ui.h:16 msgid "Start on _top" msgstr "Beginnen aan _bovenkant" #: ../src/resources/preferences.ui.h:17 msgid "Window" msgstr "Venster" #: ../src/resources/window.ui.h:2 msgid "Speed:" msgstr "Snelheid:" #: ../src/resources/window-headerbar.ui.h:2 msgid "Open a file" msgstr "Een bestand openen" parlatype-1.5.4/po/LINGUAS0000644000175000017500000000036613201350053012103 00000000000000# Don't forget about /libparlatype/po/LINGUAS and /help/Makefile.am # Note: he is empty right now, it's here to test right to left layout. # Please keep this list sorted alphabetically. # ca de en_GB es fr he id it ja kab ku lt ms nl pt pt_BR sr parlatype-1.5.4/po/ja.po0000644000175000017500000002317113176574165012036 00000000000000# Japanese translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Shinichirou Yamada , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-07-26 18:17+0200\n" "PO-Revision-Date: 2017-07-26 10:12+0000\n" "Last-Translator: Shinichirou Yamada " "\n" "Language-Team: Japanese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Launchpad-Export-Date: 2017-07-30 07:24+0000\n" "X-Generator: Launchpad (build 18441)\n" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 #: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 #: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "スピーチの書き起こしを手動で行うためのメディアプレイヤー" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "Parlatype は使いやすいメディアプレイヤーです。その主目的はあなたがスピーチを転写するのを助けることにあります。" #: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "転写ユーティリティー" #: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 msgid "Transcription;" msgstr "" #: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 msgid "LibreOffice/Parlatype Helpers" msgstr "" #: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 msgid "Control Parlatype using LibreOffice macros" msgstr "" #: ../src/main.c:36 msgid "Fatal error" msgstr "致命的なエラー" #: ../src/main.c:40 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" "Parlatype は GStreamer 1.x の実行を必要とします。GStreamer のインストールをチェックして、\"Good " "Plugins\" がインストール済みかどうかを確認してください。\n" "Parlatype はこのエラーメッセージを返した後、終了します: %s" #: ../src/pt-app.c:55 msgid "Show the application's version" msgstr "アプリケーションのバージョンを表示する" #: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "最近使用したファイル" #: ../src/pt-app.c:77 ../src/pt-app.c:134 msgid "_Cancel" msgstr "キャンセル(_C)" #: ../src/pt-app.c:78 ../src/pt-app.c:135 msgid "_Open" msgstr "開く(_O)" #: ../src/pt-app.c:90 ../src/pt-app.c:146 msgid "All files" msgstr "すべてのファイル" #: ../src/pt-app.c:131 msgid "Open Audio File" msgstr "音楽ファイルを開く" #: ../src/pt-app.c:145 msgid "Audio files" msgstr "音楽ファイル" #. Translators: %s is a detailed error message #: ../src/pt-app.c:202 #, c-format msgid "Error opening help: %s" msgstr "" #. Translators: This is part of the about box, followed by the #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" #: ../src/pt-app.c:220 msgid "Including code from other projects:" msgstr "他のプロジェクトによるコードを内包しています:" #: ../src/pt-app.c:238 msgid "A basic transcription utility" msgstr "ベーシックな転写ユーティリティー" #: ../src/pt-app.c:242 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Shinichirou Yamada https://launchpad.net/~yamada-strong-yamada-nice-64bit" #: ../src/pt-app.c:424 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" msgstr "警告: Parlatype は一度にファイルを一つだけ処理します。他のファイルは無視されます。\n" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-goto-dialog.c:49 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is part of the Preferences dialog #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. #: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:58 #: ../src/pt-preferences.c:68 ../src/pt-preferences.c:78 msgid "second" msgid_plural "seconds" msgstr[0] "秒" #: ../src/pt-preferences.c:189 msgid "_Close" msgstr "閉じる(_C)" #: ../src/pt-window.c:274 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "%d 秒前に戻る" #: ../src/pt-window.c:289 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "%d 秒先に進む" #: ../src/pt-window.c:306 msgid "Pause" msgstr "一時停止" #: ../src/pt-window.c:309 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "一時停止して %d 秒前に戻る" #: ../src/pt-window.c:316 msgid "Start playing" msgstr "再生を開始する" #: ../src/pt-window.c:817 msgid "View follows cursor" msgstr "カーソルに追従して表示します" #: ../src/pt-window.c:819 msgid "Click to follow cursor" msgstr "クリックするとカーソルの位置を先頭に表示します" #: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 msgid "Go to ..." msgstr "移動..." #: ../src/resources/goto-dialog.ui.h:2 msgid "Go to position:" msgstr "次の位置まで移動:" #: ../src/resources/help-overlay.ui.h:1 msgid "General" msgstr "" #: ../src/resources/help-overlay.ui.h:2 msgid "Open a media file" msgstr "" #: ../src/resources/help-overlay.ui.h:3 msgid "Open recently used media files" msgstr "" #: ../src/resources/help-overlay.ui.h:4 msgid "Show/hide action menu" msgstr "" #: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 msgid "Quit" msgstr "終了" #: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 msgid "Waveform" msgstr "波形" #: ../src/resources/help-overlay.ui.h:7 msgid "Zoom in" msgstr "" #: ../src/resources/help-overlay.ui.h:8 msgid "Zoom out" msgstr "" #: ../src/resources/help-overlay.ui.h:9 msgid "Open “Go to” dialog" msgstr "" #: ../src/resources/help-overlay.ui.h:10 msgid "Copy timestamp to clipboard" msgstr "" #: ../src/resources/help-overlay.ui.h:11 msgid "Go to timestamp in clipboard" msgstr "" #: ../src/resources/help-overlay.ui.h:12 ../src/resources/menus.ui.h:5 msgid "Help" msgstr "ヘルプ" #: ../src/resources/help-overlay.ui.h:13 msgid "Show help" msgstr "" #: ../src/resources/help-overlay.ui.h:14 msgid "Show keyboard shortcuts" msgstr "" #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "ファイルを開く" #: ../src/resources/menus.ui.h:3 msgid "Preferences" msgstr "設定" #: ../src/resources/menus.ui.h:4 msgid "_Keyboard Shortcuts" msgstr "" #: ../src/resources/menus.ui.h:6 msgid "Info" msgstr "情報" #: ../src/resources/menus.ui.h:8 msgid "Copy timestamp" msgstr "タイムスタンプをコピー" #: ../src/resources/menus.ui.h:9 msgid "Insert timestamp" msgstr "タイムスタンプをインサート" #: ../src/resources/menus.ui.h:11 msgid "_File" msgstr "ファイル(_F)" #: ../src/resources/menus.ui.h:12 msgid "_Edit" msgstr "編集(_E)" #: ../src/resources/menus.ui.h:13 msgid "_Help" msgstr "ヘルプ(_H)" #: ../src/resources/preferences.ui.h:1 msgid "Parlatype Preferences" msgstr "Parlatype の設定" #: ../src/resources/preferences.ui.h:2 msgid "_Pixels per second:" msgstr "1秒辺りのピクセル数(_P):" #: ../src/resources/preferences.ui.h:3 msgid "Show _time scale" msgstr "タイムスケールを表示する(_T)" #. Resolution of the waveform image #: ../src/resources/preferences.ui.h:5 msgid "Resolution" msgstr "解像度" #. A section in preferences, how to display the waveform. #: ../src/resources/preferences.ui.h:7 msgid "Display" msgstr "表示" #: ../src/resources/preferences.ui.h:8 msgid "_Moving cursor" msgstr "カーソルを移動する(_M)" #: ../src/resources/preferences.ui.h:9 msgid "_Fixed cursor" msgstr "カーソルを固定する(_F)" #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "一時停止時に戻る位置(_P):" #: ../src/resources/preferences.ui.h:12 msgid "Jump _back:" msgstr "戻る位置(_B):" #: ../src/resources/preferences.ui.h:13 msgid "Jump _forward:" msgstr "進む位置(_F):" #: ../src/resources/preferences.ui.h:14 msgid "Controls" msgstr "コントロール" #: ../src/resources/preferences.ui.h:15 msgid "Remember _size" msgstr "サイズを記憶する(_S)" #: ../src/resources/preferences.ui.h:16 msgid "Remember _position" msgstr "位置を記憶する(_P)" #: ../src/resources/preferences.ui.h:17 msgid "Start on _top" msgstr "最前面に起動する(_T)" #: ../src/resources/preferences.ui.h:18 msgid "Window" msgstr "ウィンドウ" #: ../src/resources/window.ui.h:2 msgid "Speed:" msgstr "速度:" #: ../src/resources/window-headerbar.ui.h:2 msgid "Open a file" msgstr "ファイルを開きます" parlatype-1.5.4/po/pt.po0000644000175000017500000001577113176574165012076 00000000000000# Portuguese translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Vitor Loureiro , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-01-16 21:45+0100\n" "PO-Revision-Date: 2017-01-17 12:06+0000\n" "Last-Translator: Vitor Loureiro \n" "Language-Team: Portuguese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2017-01-26 11:32+0000\n" "X-Generator: Launchpad (build 18315)\n" #: ../data/org.gnome.parlatype.appdata.xml.in.h:1 #: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:66 #: ../src/pt-app.c:209 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" #: ../data/org.gnome.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "" #: ../data/org.gnome.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" #: ../data/org.gnome.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "" #: ../src/main.c:42 msgid "Show the application's version" msgstr "Mostrar a versão da aplicação" #: ../src/main.c:58 msgid "Fatal error" msgstr "Erro fatal" #: ../src/main.c:62 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" #. Translators: This is part of the output if you type `parlatype --help` #. in terminal. The square brackets indicate that a file (filename) is #. an optional argument for parlatype. Arguments in help output are usually #. uppercase. #: ../src/main.c:84 msgid "[FILE]" msgstr "[FICHEIRO]" #: ../src/main.c:87 msgid "Minimal audio player for manual speech transcription" msgstr "" #: ../src/pt-app.c:57 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Ficheiros recentes" #: ../src/pt-app.c:59 ../src/pt-app.c:116 msgid "_Cancel" msgstr "_Cancelar" #: ../src/pt-app.c:60 ../src/pt-app.c:117 msgid "_Open" msgstr "_Abrir" #: ../src/pt-app.c:72 ../src/pt-app.c:128 msgid "All files" msgstr "Todos os ficheiros" #: ../src/pt-app.c:113 msgid "Open Audio File" msgstr "Abrir Ficheiro Áudio" #: ../src/pt-app.c:127 msgid "Audio files" msgstr "Ficheiros áudio" #. Translators: %s is a detailed error message #: ../src/pt-app.c:176 #, c-format msgid "Error opening help: %s" msgstr "" #. Translators: This is part of the about box, followed by the #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" #: ../src/pt-app.c:194 msgid "Including code from other projects:" msgstr "" #: ../src/pt-app.c:212 msgid "A basic transcription utility" msgstr "" #: ../src/pt-app.c:216 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Vitor Loureiro https://launchpad.net/~hardsargent128" #: ../src/pt-app.c:369 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" msgstr "" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-goto-dialog.c:49 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is part of the Preferences dialog #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. #: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 #: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 msgid "second" msgid_plural "seconds" msgstr[0] "segundo" msgstr[1] "segundos" #: ../src/pt-preferences.c:164 msgid "_Close" msgstr "_Fechar" #: ../src/pt-window.c:218 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "" msgstr[1] "" #: ../src/pt-window.c:232 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "" msgstr[1] "" #: ../src/pt-window.c:247 msgid "Pause" msgstr "Pausa" #: ../src/pt-window.c:250 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "" msgstr[1] "" #: ../src/pt-window.c:256 msgid "Start playing" msgstr "Começar a tocar" #: ../src/pt-window.c:727 msgid "View follows cursor" msgstr "" #: ../src/pt-window.c:729 msgid "Click to follow cursor" msgstr "" #: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 msgid "Go to ..." msgstr "" #: ../src/resources/goto-dialog.ui.h:2 msgid "Go to position:" msgstr "" #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Abrir o Ficheiro" #: ../src/resources/menus.ui.h:3 msgid "Preferences" msgstr "Preferências" #: ../src/resources/menus.ui.h:4 msgid "Help" msgstr "Ajuda" #: ../src/resources/menus.ui.h:5 msgid "Info" msgstr "Informação" #: ../src/resources/menus.ui.h:6 msgid "Quit" msgstr "Sair" #: ../src/resources/menus.ui.h:7 msgid "Copy timestamp" msgstr "" #: ../src/resources/menus.ui.h:8 msgid "Insert timestamp" msgstr "" #: ../src/resources/menus.ui.h:10 msgid "_File" msgstr "_Ficheiro" #: ../src/resources/menus.ui.h:11 msgid "_Edit" msgstr "_Editar" #: ../src/resources/menus.ui.h:12 msgid "_Help" msgstr "_Ajuda" #: ../src/resources/preferences.ui.h:1 msgid "Parlatype Preferences" msgstr "" #: ../src/resources/preferences.ui.h:2 msgid "_Pixels per second:" msgstr "" #: ../src/resources/preferences.ui.h:3 msgid "Show _time scale" msgstr "" #. Resolution of the waveform image #: ../src/resources/preferences.ui.h:5 msgid "Resolution" msgstr "Resolução" #. A section in preferences, how to display the waveform. #: ../src/resources/preferences.ui.h:7 msgid "Display" msgstr "Visualização" #: ../src/resources/preferences.ui.h:8 msgid "_Moving cursor" msgstr "" #: ../src/resources/preferences.ui.h:9 msgid "_Fixed cursor" msgstr "" #: ../src/resources/preferences.ui.h:10 msgid "Waveform" msgstr "Forma de onda" #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "" #: ../src/resources/preferences.ui.h:12 msgid "Jump _back:" msgstr "" #: ../src/resources/preferences.ui.h:13 msgid "Jump _forward:" msgstr "" #: ../src/resources/preferences.ui.h:14 msgid "Controls" msgstr "Controlos" #: ../src/resources/preferences.ui.h:15 msgid "Remember _position" msgstr "" #: ../src/resources/preferences.ui.h:16 msgid "Start on _top" msgstr "" #: ../src/resources/preferences.ui.h:17 msgid "Window" msgstr "Janela" #: ../src/resources/window.ui.h:2 msgid "Speed:" msgstr "Velocidade:" #: ../src/resources/window-headerbar.ui.h:2 msgid "Open a file" msgstr "Abrir um ficheiro" parlatype-1.5.4/po/POTFILES.skip0000644000175000017500000000025413200427162013174 00000000000000libparlatype/src/pt-player.c libparlatype/src/pt-progress-dialog.c libparlatype/src/pt-waveloader.c libparlatype/src/pt-waveviewer.c libparlatype/src/pt-waveviewer-ruler.c parlatype-1.5.4/po/id.po0000644000175000017500000001761013176574165012041 00000000000000# Indonesian translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Ari Setyo Wibowo , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-01-16 21:45+0100\n" "PO-Revision-Date: 2017-01-18 08:43+0000\n" "Last-Translator: Ari Setyo Wibowo \n" "Language-Team: Indonesian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Launchpad-Export-Date: 2017-01-20 20:44+0000\n" "X-Generator: Launchpad (build 18302)\n" #: ../data/org.gnome.parlatype.appdata.xml.in.h:1 #: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:66 #: ../src/pt-app.c:209 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" #: ../data/org.gnome.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "Pemutar media untuk transkrip pembicaraan manual" #: ../data/org.gnome.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" "Parlatype adalah pemutar media yang mudah digunakan. Tujuan utamanya adalah " "untuk membantu Anda mentranskrip pembicaraan." #: ../data/org.gnome.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "Peralatan transkripsi" #: ../src/main.c:42 msgid "Show the application's version" msgstr "Tampilkan versi aplikasinya" #: ../src/main.c:58 msgid "Fatal error" msgstr "Kesalahan fatal" #: ../src/main.c:62 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" "Parlatype butuh GStreamer 1.x untuk berjalan. Silakan periksa installasi " "GStreamer Anda dan pastikan \"Good Plugins\" telah terinstall.\n" "Parlatype akan keluar sekarang, menerima pesan kesalahan ini: %s" #. Translators: This is part of the output if you type `parlatype --help` #. in terminal. The square brackets indicate that a file (filename) is #. an optional argument for parlatype. Arguments in help output are usually #. uppercase. #: ../src/main.c:84 msgid "[FILE]" msgstr "[FILE]" #: ../src/main.c:87 msgid "Minimal audio player for manual speech transcription" msgstr "Pemutar audio minimal untuk transkrip pembicaraan manual" #: ../src/pt-app.c:57 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Berkas Terakhir" #: ../src/pt-app.c:59 ../src/pt-app.c:116 msgid "_Cancel" msgstr "_Batal" #: ../src/pt-app.c:60 ../src/pt-app.c:117 msgid "_Open" msgstr "B_uka" #: ../src/pt-app.c:72 ../src/pt-app.c:128 msgid "All files" msgstr "Semua berkas" #: ../src/pt-app.c:113 msgid "Open Audio File" msgstr "Buka Berkas Audio" #: ../src/pt-app.c:127 msgid "Audio files" msgstr "Berkas audio" #. Translators: %s is a detailed error message #: ../src/pt-app.c:176 #, c-format msgid "Error opening help: %s" msgstr "Kesalahan membuka bantuan: %s" #. Translators: This is part of the about box, followed by the #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" #: ../src/pt-app.c:194 msgid "Including code from other projects:" msgstr "Termasuk kode dari proyek lain:" #: ../src/pt-app.c:212 msgid "A basic transcription utility" msgstr "Sebuah peralatan transkrip dasar" #: ../src/pt-app.c:216 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Ari Setyo Wibowo https://launchpad.net/~ari-el-uno" #: ../src/pt-app.c:369 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" msgstr "" "Peringatan: Parlatype hanya menangani satu berkas dalam satu waktu. Berkas " "lain diabaikan.\n" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-goto-dialog.c:49 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is part of the Preferences dialog #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. #: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 #: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 msgid "second" msgid_plural "seconds" msgstr[0] "detik" #: ../src/pt-preferences.c:164 msgid "_Close" msgstr "_Tutup" #: ../src/pt-window.c:218 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Lompat mundur %d detik" #: ../src/pt-window.c:232 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "Lompat maju %d detik" #: ../src/pt-window.c:247 msgid "Pause" msgstr "Pause" #: ../src/pt-window.c:250 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Pause dan putar ulang %d detik" #: ../src/pt-window.c:256 msgid "Start playing" msgstr "Mulai memutar" #: ../src/pt-window.c:727 msgid "View follows cursor" msgstr "Lihat ikuti kursor" #: ../src/pt-window.c:729 msgid "Click to follow cursor" msgstr "Klik untuk mengikuti kursor" #: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 msgid "Go to ..." msgstr "Pergi ke ..." #: ../src/resources/goto-dialog.ui.h:2 msgid "Go to position:" msgstr "Pergi ke posisi:" #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Buka Berkas" #: ../src/resources/menus.ui.h:3 msgid "Preferences" msgstr "Preferensi" #: ../src/resources/menus.ui.h:4 msgid "Help" msgstr "Bantuan" #: ../src/resources/menus.ui.h:5 msgid "Info" msgstr "Info" #: ../src/resources/menus.ui.h:6 msgid "Quit" msgstr "Keluar" #: ../src/resources/menus.ui.h:7 msgid "Copy timestamp" msgstr "Salin informasi waktu" #: ../src/resources/menus.ui.h:8 msgid "Insert timestamp" msgstr "Masukkan informasi waktu" #: ../src/resources/menus.ui.h:10 msgid "_File" msgstr "B_erkas" #: ../src/resources/menus.ui.h:11 msgid "_Edit" msgstr "_Sunting" #: ../src/resources/menus.ui.h:12 msgid "_Help" msgstr "Bant_uan" #: ../src/resources/preferences.ui.h:1 msgid "Parlatype Preferences" msgstr "Preferensi Parlatype" #: ../src/resources/preferences.ui.h:2 msgid "_Pixels per second:" msgstr "_Pixels per detik:" #: ../src/resources/preferences.ui.h:3 msgid "Show _time scale" msgstr "Tampilkan _skala waktu" #. Resolution of the waveform image #: ../src/resources/preferences.ui.h:5 msgid "Resolution" msgstr "Resolusi" #. A section in preferences, how to display the waveform. #: ../src/resources/preferences.ui.h:7 msgid "Display" msgstr "Tampilan" #: ../src/resources/preferences.ui.h:8 msgid "_Moving cursor" msgstr "_Kursor bergerak" #: ../src/resources/preferences.ui.h:9 msgid "_Fixed cursor" msgstr "Kursor _Tetap" #: ../src/resources/preferences.ui.h:10 msgid "Waveform" msgstr "Gelombang" #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "Lompat mundur ke _pause:" #: ../src/resources/preferences.ui.h:12 msgid "Jump _back:" msgstr "Lompat _mundur:" #: ../src/resources/preferences.ui.h:13 msgid "Jump _forward:" msgstr "Jump ma_ju:" #: ../src/resources/preferences.ui.h:14 msgid "Controls" msgstr "Kendali" #: ../src/resources/preferences.ui.h:15 msgid "Remember _position" msgstr "Ingat _posisi" #: ../src/resources/preferences.ui.h:16 msgid "Start on _top" msgstr "Mulai di _atas" #: ../src/resources/preferences.ui.h:17 msgid "Window" msgstr "Jendela" #: ../src/resources/window.ui.h:2 msgid "Speed:" msgstr "Kecepatan:" #: ../src/resources/window-headerbar.ui.h:2 msgid "Open a file" msgstr "Buka berkas" parlatype-1.5.4/po/sr.po0000644000175000017500000002136113176574165012067 00000000000000# Serbian translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Томица Кораћ , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-04-18 20:55+0200\n" "PO-Revision-Date: 2017-06-25 21:09+0000\n" "Last-Translator: Томица Кораћ \n" "Language-Team: Serbian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && " "n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" "X-Launchpad-Export-Date: 2017-06-29 09:44+0000\n" "X-Generator: Launchpad (build 18418)\n" #: ../data/org.gnome.parlatype.appdata.xml.in.h:1 #: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:65 #: ../src/pt-app.c:216 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Парлатајп" #: ../data/org.gnome.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "Плејер за ручно записивање говора" #: ../data/org.gnome.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" "Паратајп је медија плејер лак за употребу. Његова главна намена је помоћ при " "транскрибовању." #: ../data/org.gnome.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "Алат за транскрипцију." #: ../src/main.c:43 msgid "Show the application's version" msgstr "Прикажи верзију апликације." #: ../src/main.c:59 msgid "Fatal error" msgstr "Кобна грешка" #: ../src/main.c:63 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" "Парлатајп захтева GStreamer 1.x. Проверите инсталацију ЏиСтримера и " "потврдите јесу ли инсталирани „добри плагинови“.\n" "Парлатајп ће се сада угасити, пријављена је следећа грешка: %s" #. Translators: This is part of the output if you type `parlatype --help` #. in terminal. The square brackets indicate that a file (filename) is #. an optional argument for parlatype. Arguments in help output are usually #. uppercase. #: ../src/main.c:87 msgid "[FILE]" msgstr "[ФАЈЛ]" #: ../src/main.c:90 msgid "Minimal audio player for manual speech transcription" msgstr "Мали аудио плејер за ручну транскрипцију" #: ../src/pt-app.c:56 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Недавни фајлови" #: ../src/pt-app.c:58 ../src/pt-app.c:115 msgid "_Cancel" msgstr "_Откажи" #: ../src/pt-app.c:59 ../src/pt-app.c:116 msgid "_Open" msgstr "_Отвори" #: ../src/pt-app.c:71 ../src/pt-app.c:127 msgid "All files" msgstr "Сви фајлови" #: ../src/pt-app.c:112 msgid "Open Audio File" msgstr "Отвори звучни фајл" #: ../src/pt-app.c:126 msgid "Audio files" msgstr "Звучни фајлови" #. Translators: %s is a detailed error message #: ../src/pt-app.c:183 #, c-format msgid "Error opening help: %s" msgstr "Грешка при отварању помоћи: %s" #. Translators: This is part of the about box, followed by the #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" #: ../src/pt-app.c:201 msgid "Including code from other projects:" msgstr "Код из осталих пројеката:" #: ../src/pt-app.c:219 msgid "A basic transcription utility" msgstr "Основни алат за транскрипцију" #: ../src/pt-app.c:223 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Томица Кораћ https://launchpad.net/~tomak-delijeonline" #: ../src/pt-app.c:394 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" msgstr "" "Упозорење: Парлатајп ради само са једним фајлом истовремено. Други фајлови " "се занемарују.\n" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-goto-dialog.c:49 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is part of the Preferences dialog #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. #: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 #: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 msgid "second" msgid_plural "seconds" msgstr[0] "секунду" msgstr[1] "sekundi" msgstr[2] "sekundi" #: ../src/pt-preferences.c:169 msgid "_Close" msgstr "_Close" #: ../src/pt-window.c:273 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Врати се 1 секунду" msgstr[1] "Врати се %d секунде" msgstr[2] "Врати се %d секунди" #: ../src/pt-window.c:288 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "Прескочи 1 секунду" msgstr[1] "Прескочи %d секунде" msgstr[2] "Прескочи %d секунди" #: ../src/pt-window.c:305 msgid "Pause" msgstr "Pauza" #: ../src/pt-window.c:308 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Застани и врати 1 секунду" msgstr[1] "Застани и врати %d секунде" msgstr[2] "Застани и врати %d секунди" #: ../src/pt-window.c:315 msgid "Start playing" msgstr "Покрени" #: ../src/pt-window.c:804 msgid "View follows cursor" msgstr "Приказ прати курсор" #: ../src/pt-window.c:806 msgid "Click to follow cursor" msgstr "Кликни да пратиш курсор" #: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 msgid "Go to ..." msgstr "Иди на..." #: ../src/resources/goto-dialog.ui.h:2 msgid "Go to position:" msgstr "Иди на положај:" #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Отвори фајл" #: ../src/resources/menus.ui.h:3 msgid "Preferences" msgstr "Поставке" #: ../src/resources/menus.ui.h:4 msgid "Help" msgstr "Помоћ" #: ../src/resources/menus.ui.h:5 msgid "Info" msgstr "Подаци" #: ../src/resources/menus.ui.h:6 msgid "Quit" msgstr "Излаз" #: ../src/resources/menus.ui.h:7 msgid "Copy timestamp" msgstr "Копирај време" #: ../src/resources/menus.ui.h:8 msgid "Insert timestamp" msgstr "Убаци време" #: ../src/resources/menus.ui.h:10 msgid "_File" msgstr "_Фајл" #: ../src/resources/menus.ui.h:11 msgid "_Edit" msgstr "_Измени" #: ../src/resources/menus.ui.h:12 msgid "_Help" msgstr "_Помоћ" #: ../src/resources/preferences.ui.h:1 msgid "Parlatype Preferences" msgstr "Поставке Парлатајпа" #: ../src/resources/preferences.ui.h:2 msgid "_Pixels per second:" msgstr "_Пиксела по секунди" #: ../src/resources/preferences.ui.h:3 msgid "Show _time scale" msgstr "" #. Resolution of the waveform image #: ../src/resources/preferences.ui.h:5 msgid "Resolution" msgstr "" #. A section in preferences, how to display the waveform. #: ../src/resources/preferences.ui.h:7 msgid "Display" msgstr "" #: ../src/resources/preferences.ui.h:8 msgid "_Moving cursor" msgstr "" #: ../src/resources/preferences.ui.h:9 msgid "_Fixed cursor" msgstr "" #: ../src/resources/preferences.ui.h:10 msgid "Waveform" msgstr "" #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "" #: ../src/resources/preferences.ui.h:12 msgid "Jump _back:" msgstr "" #: ../src/resources/preferences.ui.h:13 msgid "Jump _forward:" msgstr "" #: ../src/resources/preferences.ui.h:14 msgid "Controls" msgstr "" #: ../src/resources/preferences.ui.h:15 msgid "Remember _position" msgstr "" #: ../src/resources/preferences.ui.h:16 msgid "Start on _top" msgstr "" #: ../src/resources/preferences.ui.h:17 msgid "Window" msgstr "" #: ../src/resources/window.ui.h:2 msgid "Speed:" msgstr "" #: ../src/resources/window-headerbar.ui.h:2 msgid "Open a file" msgstr "" parlatype-1.5.4/po/ms.po0000644000175000017500000001661313176574165012066 00000000000000# Malay translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # abuyop , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-03-26 14:25+0200\n" "PO-Revision-Date: 2017-04-08 13:48+0000\n" "Last-Translator: Gabor Karsay \n" "Language-Team: Malay \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2017-04-08 13:52+0000\n" "X-Generator: Launchpad (build 18343)\n" #: ../data/org.gnome.parlatype.appdata.xml.in.h:1 #: ../data/org.gnome.parlatype.desktop.in.h:1 ../src/pt-app.c:65 #: ../src/pt-app.c:216 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" #: ../data/org.gnome.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "Pemain media untuk transripsi pertuturan manual" #: ../data/org.gnome.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" #: ../data/org.gnome.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "Utiliti transkripsi" #: ../src/main.c:43 msgid "Show the application's version" msgstr "Tunjuk versi aplikasi" #: ../src/main.c:59 msgid "Fatal error" msgstr "Ralat mati" #: ../src/main.c:63 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" #. Translators: This is part of the output if you type `parlatype --help` #. in terminal. The square brackets indicate that a file (filename) is #. an optional argument for parlatype. Arguments in help output are usually #. uppercase. #: ../src/main.c:87 msgid "[FILE]" msgstr "[FAIL]" #: ../src/main.c:90 msgid "Minimal audio player for manual speech transcription" msgstr "" #: ../src/pt-app.c:56 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Fail Baru-baru Ini" #: ../src/pt-app.c:58 ../src/pt-app.c:115 msgid "_Cancel" msgstr "_Batal" #: ../src/pt-app.c:59 ../src/pt-app.c:116 msgid "_Open" msgstr "B_uka" #: ../src/pt-app.c:71 ../src/pt-app.c:127 msgid "All files" msgstr "Semua fail" #: ../src/pt-app.c:112 msgid "Open Audio File" msgstr "Buka Fail Audio" #: ../src/pt-app.c:126 msgid "Audio files" msgstr "Fail audio" #. Translators: %s is a detailed error message #: ../src/pt-app.c:183 #, c-format msgid "Error opening help: %s" msgstr "Ralat membuka bantuan: %s" #. Translators: This is part of the about box, followed by the #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" #: ../src/pt-app.c:201 msgid "Including code from other projects:" msgstr "Kod yang disertakan dari projek lain:" #: ../src/pt-app.c:219 msgid "A basic transcription utility" msgstr "Utiliti transkripsi asas" #: ../src/pt-app.c:223 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Gabor Karsay https://launchpad.net/~gabor-karsay\n" " abuyop https://launchpad.net/~abuyop" #: ../src/pt-app.c:376 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" msgstr "" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-goto-dialog.c:49 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is part of the Preferences dialog #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. #: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:55 #: ../src/pt-preferences.c:65 ../src/pt-preferences.c:75 msgid "second" msgid_plural "seconds" msgstr[0] "saat" msgstr[1] "saat" #: ../src/pt-preferences.c:169 msgid "_Close" msgstr "T_utup" #: ../src/pt-window.c:231 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Lompat balik 1 saat" msgstr[1] "Lompat balik %d saat" #: ../src/pt-window.c:246 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "Lompat maju 1 saat" msgstr[1] "Lompat maju %d saat" #: ../src/pt-window.c:263 msgid "Pause" msgstr "Jeda" #: ../src/pt-window.c:266 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "" msgstr[1] "" #: ../src/pt-window.c:273 msgid "Start playing" msgstr "Mulakan main" #: ../src/pt-window.c:750 msgid "View follows cursor" msgstr "Paparan ikuti kursor" #: ../src/pt-window.c:752 msgid "Click to follow cursor" msgstr "Klik untuk ikuti kursor" #: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:9 msgid "Go to ..." msgstr "Pergi ke ..." #: ../src/resources/goto-dialog.ui.h:2 msgid "Go to position:" msgstr "Pergi ke kedudukan:" #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Buka Fail" #: ../src/resources/menus.ui.h:3 msgid "Preferences" msgstr "Keutamaan" #: ../src/resources/menus.ui.h:4 msgid "Help" msgstr "Bantuan" #: ../src/resources/menus.ui.h:5 msgid "Info" msgstr "Maklumat" #: ../src/resources/menus.ui.h:6 msgid "Quit" msgstr "Keluar" #: ../src/resources/menus.ui.h:7 msgid "Copy timestamp" msgstr "Salin setem masa" #: ../src/resources/menus.ui.h:8 msgid "Insert timestamp" msgstr "Sisip setem masa" #: ../src/resources/menus.ui.h:10 msgid "_File" msgstr "_Fail" #: ../src/resources/menus.ui.h:11 msgid "_Edit" msgstr "_Sunting" #: ../src/resources/menus.ui.h:12 msgid "_Help" msgstr "_Bantuan" #: ../src/resources/preferences.ui.h:1 msgid "Parlatype Preferences" msgstr "Keutamaan Parlatype" #: ../src/resources/preferences.ui.h:2 msgid "_Pixels per second:" msgstr "_Piksel per saat:" #: ../src/resources/preferences.ui.h:3 msgid "Show _time scale" msgstr "Tunjuk skala _waktu" #. Resolution of the waveform image #: ../src/resources/preferences.ui.h:5 msgid "Resolution" msgstr "Resolusi" #. A section in preferences, how to display the waveform. #: ../src/resources/preferences.ui.h:7 msgid "Display" msgstr "Paparan" #: ../src/resources/preferences.ui.h:8 msgid "_Moving cursor" msgstr "Kursor _bergerak" #: ../src/resources/preferences.ui.h:9 msgid "_Fixed cursor" msgstr "Kursor _tetap" #: ../src/resources/preferences.ui.h:10 msgid "Waveform" msgstr "Bentuk Gelombang" #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "" #: ../src/resources/preferences.ui.h:12 msgid "Jump _back:" msgstr "" #: ../src/resources/preferences.ui.h:13 msgid "Jump _forward:" msgstr "" #: ../src/resources/preferences.ui.h:14 msgid "Controls" msgstr "Kawalan" #: ../src/resources/preferences.ui.h:15 msgid "Remember _position" msgstr "Ingat _kedudukan" #: ../src/resources/preferences.ui.h:16 msgid "Start on _top" msgstr "Mula di _atas" #: ../src/resources/preferences.ui.h:17 msgid "Window" msgstr "Tetingkap" #: ../src/resources/window.ui.h:2 msgid "Speed:" msgstr "Kelajuan:" #: ../src/resources/window-headerbar.ui.h:2 msgid "Open a file" msgstr "Buka satu fail" parlatype-1.5.4/po/POTFILES.in0000644000175000017500000000113113176574165012651 00000000000000# List of source files which contain translatable strings. data/com.github.gkarsay.parlatype.appdata.xml.in data/com.github.gkarsay.parlatype.desktop.in data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in src/main.c src/pt-app.c src/pt-goto-dialog.c src/pt-preferences.c src/pt-window.c [type: gettext/glade]src/resources/goto-dialog.ui [type: gettext/glade]src/resources/help-overlay.ui [type: gettext/glade]src/resources/menus.ui [type: gettext/glade]src/resources/preferences.ui [type: gettext/glade]src/resources/window.ui [type: gettext/glade]src/resources/window-headerbar.ui parlatype-1.5.4/po/lt.po0000644000175000017500000002360113176574165012061 00000000000000# Lithuanian translation for parlatype # Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017 # This file is distributed under the same license as the parlatype package. # Moo , 2017. # msgid "" msgstr "" "Project-Id-Version: parlatype 1.5\n" "Report-Msgid-Bugs-To: https://github.com/gkarsay/parlatype/issues\n" "POT-Creation-Date: 2017-07-26 18:17+0200\n" "PO-Revision-Date: 2017-07-27 21:55+0000\n" "Last-Translator: Moo \n" "Language-Team: Lithuanian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && " "(n%100<10 || n%100>=20) ? 1 : 2;\n" "X-Launchpad-Export-Date: 2017-07-30 07:24+0000\n" "X-Generator: Launchpad (build 18441)\n" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:1 #: ../data/com.github.gkarsay.parlatype.desktop.in.h:1 ../src/pt-app.c:84 #: ../src/pt-app.c:235 ../src/resources/window.ui.h:1 #: ../src/resources/window-headerbar.ui.h:1 msgid "Parlatype" msgstr "Parlatype" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:2 msgid "Media player for manual speech transcription" msgstr "Medijos grotuvas, skirtas rankinei kalbėjimo transkripcijai" #: ../data/com.github.gkarsay.parlatype.appdata.xml.in.h:3 msgid "" "Parlatype is an easy to use media player. Its main purpose is to help you " "transcribing speech." msgstr "" "Parlatype yra lengvas naudoti medijos grotuvas. Jo pagrindinis tikslas yra " "padėti jums perrašyti kalbėjimą." #: ../data/com.github.gkarsay.parlatype.desktop.in.h:2 msgid "Transcription utility" msgstr "Transkripcijos paslaugų programa" #: ../data/com.github.gkarsay.parlatype.desktop.in.h:3 msgid "Transcription;" msgstr "Transkripcija;" #: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:1 msgid "LibreOffice/Parlatype Helpers" msgstr "LibreOffice/Parlatype pagelbikliai" #: ../data/com.github.gkarsay.parlatype.libreoffice-helpers.metainfo.xml.in.h:2 msgid "Control Parlatype using LibreOffice macros" msgstr "Valdyti Parlatype, naudojant LibreOffice makrokomandas" #: ../src/main.c:36 msgid "Fatal error" msgstr "Lemtingoji klaida" #: ../src/main.c:40 #, c-format msgid "" "Parlatype needs GStreamer 1.x to run. Please check your installation of " "GStreamer and make sure you have the \"Good Plugins\" installed.\n" "Parlatype will quit now, it received this error message: %s" msgstr "" "Parlatype savo darbui reikalauja GStreamer 1.x. Prašome patikrinti savo " "GStreamer įdiegimą ir įsitikinti, kad esate įdiegę \"geruosius įskiepius\" " "(angl. Good Plugins).\n" "Dabar Parlatype užbaigs darbą, programa gavo šią klaidą: %s" #: ../src/pt-app.c:55 msgid "Show the application's version" msgstr "Rodyti programos versiją" #: ../src/pt-app.c:75 ../src/resources/menus.ui.h:2 msgid "Recent Files" msgstr "Paskiausiai naudoti failai" #: ../src/pt-app.c:77 ../src/pt-app.c:134 msgid "_Cancel" msgstr "_Atsisakyti" #: ../src/pt-app.c:78 ../src/pt-app.c:135 msgid "_Open" msgstr "_Atverti" #: ../src/pt-app.c:90 ../src/pt-app.c:146 msgid "All files" msgstr "Visi failai" #: ../src/pt-app.c:131 msgid "Open Audio File" msgstr "Atverti garso failą" #: ../src/pt-app.c:145 msgid "Audio files" msgstr "Garso failai" #. Translators: %s is a detailed error message #: ../src/pt-app.c:202 #, c-format msgid "Error opening help: %s" msgstr "Klaida, atveriant žinyną: %s" #. Translators: This is part of the about box, followed by the #. copyright holders of code from other projects. Instead of #. "including" it could also say "with" or just "Code from #. other projects:" #: ../src/pt-app.c:220 msgid "Including code from other projects:" msgstr "Kodas iš kitų projektų:" #: ../src/pt-app.c:238 msgid "A basic transcription utility" msgstr "Pagrindinė transkripcijos paslaugų programa" #: ../src/pt-app.c:242 msgid "translator-credits" msgstr "" "Launchpad Contributions:\n" " Moo https://launchpad.net/~mooo" #: ../src/pt-app.c:424 #, c-format msgid "" "Warning: Parlatype handles only one file at a time. The other files are " "ignored.\n" msgstr "" "Įspėjimas: Parlatype vienu metu apdoroja tik vieną failą. Kitų failų yra " "nepaisoma.\n" #. Translators: This is a time format, like "2:05:30" for 2 #. hours, 5 minutes, and 30 seconds. You may change ":" to #. the separator that your locale uses or use "%Id" instead #. of "%d" if your locale uses localized digits. #: ../src/pt-goto-dialog.c:49 #, c-format msgctxt "long time format" msgid "%d:%02d:%02d" msgstr "%d:%02d:%02d" #. Translators: This is part of the Preferences dialog #. or the "Go to ..." dialog. There is a label like #. "Jump back:", "Jump forward:", "Jump back on pause:" #. or "Go to position:" before. #: ../src/pt-goto-dialog.c:79 ../src/pt-preferences.c:58 #: ../src/pt-preferences.c:68 ../src/pt-preferences.c:78 msgid "second" msgid_plural "seconds" msgstr[0] "sekundę" msgstr[1] "sekundes" msgstr[2] "sekundžių" #: ../src/pt-preferences.c:189 msgid "_Close" msgstr "_Užverti" #: ../src/pt-window.c:274 #, c-format msgid "Jump back 1 second" msgid_plural "Jump back %d seconds" msgstr[0] "Peršokti %d sekundę atgal" msgstr[1] "Peršokti %d sekundes atgal" msgstr[2] "Peršokti %d sekundžių atgal" #: ../src/pt-window.c:289 #, c-format msgid "Jump forward 1 second" msgid_plural "Jump forward %d seconds" msgstr[0] "Peršokti %d sekundę pirmyn" msgstr[1] "Peršokti %d sekundes pirmyn" msgstr[2] "Peršokti %d sekundžių pirmyn" #: ../src/pt-window.c:306 msgid "Pause" msgstr "Pristabdyti" #: ../src/pt-window.c:309 #, c-format msgid "Pause and rewind 1 second" msgid_plural "Pause and rewind %d seconds" msgstr[0] "Pristabdyti ir atsukti %d sekundę atgal" msgstr[1] "Pristabdyti ir atsukti %d sekundes atgal" msgstr[2] "Pristabdyti ir atsukti %d sekundžių atgal" #: ../src/pt-window.c:316 msgid "Start playing" msgstr "Pradėti groti" #: ../src/pt-window.c:817 msgid "View follows cursor" msgstr "Rodinys seka paskui žymeklį" #: ../src/pt-window.c:819 msgid "Click to follow cursor" msgstr "Spustelėkite, norėdami sekti paskui žymeklį" #: ../src/resources/goto-dialog.ui.h:1 ../src/resources/menus.ui.h:10 msgid "Go to ..." msgstr "Eiti ..." #: ../src/resources/goto-dialog.ui.h:2 msgid "Go to position:" msgstr "Pereiti į:" #: ../src/resources/help-overlay.ui.h:1 msgid "General" msgstr "Bendra" #: ../src/resources/help-overlay.ui.h:2 msgid "Open a media file" msgstr "Atverti medijos failą" #: ../src/resources/help-overlay.ui.h:3 msgid "Open recently used media files" msgstr "Atverti paskiausiai naudotus medijos failus" #: ../src/resources/help-overlay.ui.h:4 msgid "Show/hide action menu" msgstr "Rodyti/slėpti veiksmų meniu" #: ../src/resources/help-overlay.ui.h:5 ../src/resources/menus.ui.h:7 msgid "Quit" msgstr "Išeiti" #: ../src/resources/help-overlay.ui.h:6 ../src/resources/preferences.ui.h:10 msgid "Waveform" msgstr "Bangos forma" #: ../src/resources/help-overlay.ui.h:7 msgid "Zoom in" msgstr "Didinti" #: ../src/resources/help-overlay.ui.h:8 msgid "Zoom out" msgstr "Mažinti" #: ../src/resources/help-overlay.ui.h:9 msgid "Open “Go to” dialog" msgstr "Atverti \"Eiti\" dialogą" #: ../src/resources/help-overlay.ui.h:10 msgid "Copy timestamp to clipboard" msgstr "Kopijuoti laiko žymą į iškarpinę" #: ../src/resources/help-overlay.ui.h:11 msgid "Go to timestamp in clipboard" msgstr "Eiti į iškarpinėje esančią laiko žymą" #: ../src/resources/help-overlay.ui.h:12 ../src/resources/menus.ui.h:5 msgid "Help" msgstr "Žinynas" #: ../src/resources/help-overlay.ui.h:13 msgid "Show help" msgstr "Rodyti žinyną" #: ../src/resources/help-overlay.ui.h:14 msgid "Show keyboard shortcuts" msgstr "Rodyti klaviatūros trumpinius" #: ../src/resources/menus.ui.h:1 msgid "Open File" msgstr "Atverti failą" #: ../src/resources/menus.ui.h:3 msgid "Preferences" msgstr "Nuostatos" #: ../src/resources/menus.ui.h:4 msgid "_Keyboard Shortcuts" msgstr "_Klaviatūros trumpiniai" #: ../src/resources/menus.ui.h:6 msgid "Info" msgstr "Informacija" #: ../src/resources/menus.ui.h:8 msgid "Copy timestamp" msgstr "Kopijuoti laiko žymą" #: ../src/resources/menus.ui.h:9 msgid "Insert timestamp" msgstr "Įterpti laiko žymą" #: ../src/resources/menus.ui.h:11 msgid "_File" msgstr "_Failas" #: ../src/resources/menus.ui.h:12 msgid "_Edit" msgstr "_Taisa" #: ../src/resources/menus.ui.h:13 msgid "_Help" msgstr "Ž_inynas" #: ../src/resources/preferences.ui.h:1 msgid "Parlatype Preferences" msgstr "Parlatype nuostatos" #: ../src/resources/preferences.ui.h:2 msgid "_Pixels per second:" msgstr "_Pikselių per sekundę:" #: ../src/resources/preferences.ui.h:3 msgid "Show _time scale" msgstr "Rodyti _laiko mastelį" #. Resolution of the waveform image #: ../src/resources/preferences.ui.h:5 msgid "Resolution" msgstr "Raiška" #. A section in preferences, how to display the waveform. #: ../src/resources/preferences.ui.h:7 msgid "Display" msgstr "Rodymas" #: ../src/resources/preferences.ui.h:8 msgid "_Moving cursor" msgstr "_Judantis žymeklis" #: ../src/resources/preferences.ui.h:9 msgid "_Fixed cursor" msgstr "_Fiksuotas žymeklis" #: ../src/resources/preferences.ui.h:11 msgid "Jump back on _pause:" msgstr "Pristabdžius, _peršokti atgal:" #: ../src/resources/preferences.ui.h:12 msgid "Jump _back:" msgstr "Peršokti _atgal:" #: ../src/resources/preferences.ui.h:13 msgid "Jump _forward:" msgstr "Peršokti p_irmyn:" #: ../src/resources/preferences.ui.h:14 msgid "Controls" msgstr "Valdikliai" #: ../src/resources/preferences.ui.h:15 msgid "Remember _size" msgstr "Prisiminti _dydį" #: ../src/resources/preferences.ui.h:16 msgid "Remember _position" msgstr "Prisiminti _poziciją" #: ../src/resources/preferences.ui.h:17 msgid "Start on _top" msgstr "Paleisti viršuje" #: ../src/resources/preferences.ui.h:18 msgid "Window" msgstr "Langas" #: ../src/resources/window.ui.h:2 msgid "Speed:" msgstr "Greitis:" #: ../src/resources/window-headerbar.ui.h:2 msgid "Open a file" msgstr "Atverti failą" parlatype-1.5.4/README.md0000644000175000017500000000623713204250010011715 00000000000000# Parlatype For a screenshot, an overview what Parlatype actually is and packages please visit https://gkarsay.github.io/parlatype/. ## Installation ### Dependencies To install Parlatype from source you need these packages: make, autotools, intltool, gobject-introspection-1.0, gladeui-2.0, gtk-doc-tools, yelp-tools and finally gtk+-3.0 (minimum version 3.10) and gstreamer-1.0 with base plugins. On a Debian based distro you can install these with: ``` $ sudo apt-get install build-essential automake autoconf intltool libgirepository1.0-dev libgladeui-dev gtk-doc-tools yelp-tools libgtk-3-dev libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev ``` In order to run it needs at least Gtk+ 3.10 and GStreamer 1.0 with the set of “good” plugins. The Debian based command is (but you probably have them already): ``` $ sudo apt-get install libgtk-3-0 libgstreamer1.0-0 gstreamer1.0-plugins-good ``` Parlatype plays every file that's supported by GStreamer. To play e.g. MP3 files you need the “ugly” plugins. ``` $ sudo apt-get install gstreamer1.0-plugins-ugly ``` ### Building #### Configure options Parlatype ships its own library, libparlatype. Developers might be interested in having a library documentation, gobject introspection and a glade catalog for the widgets. These are the configure options: * `--with-libreoffice`: install LibreOffice macros (default: yes) * `--enable-introspection`: install gobject introspection (default: yes) * `--enable-tests`: build unit tests (default: yes) * `--enable-gtk-doc`: install library documentation (default: no) * `--enable-glade-catalog`: install a glade catalog (default: no) * `--enable-code-coverage`: enable gcov/lcov code coverage (default: no) If you want the program only, you would use `--prefix=/usr --disable-introspection`. #### From git Clone the repository and run autogen.sh. Assuming you want the program only: ``` $ git clone https://github.com/gkarsay/parlatype.git $ cd parlatype $ ./autogen.sh --prefix=/usr --disable-introspection $ make $ sudo make install ``` #### From tarball Download the latest release tarball from https://github.com/gkarsay/parlatype/releases/latest. Assuming it's version 1.5.4 and you want the program only: ``` $ wget https://github.com/gkarsay/parlatype/releases/download/v1.5.4/parlatype-1.5.4.tar.gz $ tar -zxvf parlatype-1.5.4.tar.gz $ cd parlatype-1.5.4/ $ autoreconf # might be necessary $ ./configure --prefix=/usr --disable-introspection $ make $ sudo make install ``` ### LibreOffice helpers The LibreOffice helpers/macros are installed together with Parlatype. However, this works only fine with `--prefix=/usr`. If you use a different prefix, it’s recommended to ``` $ ./configure --without-libreoffice ``` In this case, please copy the macros manually: ``` $ sudo cp libreoffice/Parlatype.py /usr/lib/libreoffice/share/Scripts/python/ ``` If you don’t want to install them system-wide, you can put them in your home dir instead: ``` $ cp libreoffice/Parlatype.py ~/.config/libreoffice/4/user/Scripts/python/ ``` There is an integrated help in Parlatype with a page describing how to use the LibreOffice helpers. ## Bugs Please report bugs at https://github.com/gkarsay/parlatype/issues. parlatype-1.5.4/config.h.in0000644000175000017500000000335113204324017012464 00000000000000/* config.h.in. Generated from configure.ac by autoheader. */ /* Define to 1 if you have the `atexit' function. */ #undef HAVE_ATEXIT /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the `setlocale' function. */ #undef HAVE_SETLOCALE /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define to the sub-directory in which libtool stores uninstalled libraries. */ #undef LT_OBJDIR /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the home page for this package. */ #undef PACKAGE_URL /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Version number of package */ #undef VERSION parlatype-1.5.4/m4/0000755000175000017500000000000013204324017011037 500000000000000parlatype-1.5.4/m4/intltool.m40000644000175000017500000002772413167645026013117 00000000000000## intltool.m4 - Configure intltool for the target system. -*-Shell-script-*- ## Copyright (C) 2001 Eazel, Inc. ## Author: Maciej Stachowiak ## Kenneth Christiansen ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ## ## This program is distributed in the hope that it will be useful, but ## WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ## General Public License for more details. ## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ## ## As a special exception to the GNU General Public License, if you ## distribute this file as part of a program that contains a ## configuration script generated by Autoconf, you may include it under ## the same distribution terms that you use for the rest of that program. dnl IT_PROG_INTLTOOL([MINIMUM-VERSION], [no-xml]) # serial 42 IT_PROG_INTLTOOL AC_DEFUN([IT_PROG_INTLTOOL], [ AC_PREREQ([2.50])dnl AC_REQUIRE([AM_NLS])dnl case "$am__api_version" in 1.[01234]) AC_MSG_ERROR([Automake 1.5 or newer is required to use intltool]) ;; *) ;; esac INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` if test -n "$1"; then AC_MSG_CHECKING([for intltool >= $1]) AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found]) test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || AC_MSG_ERROR([Your intltool is too old. You need intltool $1 or later.]) fi AC_PATH_PROG(INTLTOOL_UPDATE, [intltool-update]) AC_PATH_PROG(INTLTOOL_MERGE, [intltool-merge]) AC_PATH_PROG(INTLTOOL_EXTRACT, [intltool-extract]) if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then AC_MSG_ERROR([The intltool scripts were not found. Please install intltool.]) fi if test -z "$AM_DEFAULT_VERBOSITY"; then AM_DEFAULT_VERBOSITY=1 fi AC_SUBST([AM_DEFAULT_VERBOSITY]) INTLTOOL_V_MERGE='$(INTLTOOL__v_MERGE_$(V))' INTLTOOL__v_MERGE_='$(INTLTOOL__v_MERGE_$(AM_DEFAULT_VERBOSITY))' INTLTOOL__v_MERGE_0='@echo " ITMRG " [$]@;' AC_SUBST(INTLTOOL_V_MERGE) AC_SUBST(INTLTOOL__v_MERGE_) AC_SUBST(INTLTOOL__v_MERGE_0) INTLTOOL_V_MERGE_OPTIONS='$(intltool__v_merge_options_$(V))' intltool__v_merge_options_='$(intltool__v_merge_options_$(AM_DEFAULT_VERBOSITY))' intltool__v_merge_options_0='-q' AC_SUBST(INTLTOOL_V_MERGE_OPTIONS) AC_SUBST(intltool__v_merge_options_) AC_SUBST(intltool__v_merge_options_0) INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -p $(top_srcdir)/po $< [$]@' INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge 5000; then INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u --no-translations $< [$]@' else INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)_it_tmp_dir=tmp.intltool.[$][$]RANDOM && mkdir [$][$]_it_tmp_dir && LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u [$][$]_it_tmp_dir $< [$]@ && rmdir [$][$]_it_tmp_dir' fi INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' _IT_SUBST(INTLTOOL_DESKTOP_RULE) _IT_SUBST(INTLTOOL_DIRECTORY_RULE) _IT_SUBST(INTLTOOL_KEYS_RULE) _IT_SUBST(INTLTOOL_PROP_RULE) _IT_SUBST(INTLTOOL_OAF_RULE) _IT_SUBST(INTLTOOL_PONG_RULE) _IT_SUBST(INTLTOOL_SERVER_RULE) _IT_SUBST(INTLTOOL_SHEET_RULE) _IT_SUBST(INTLTOOL_SOUNDLIST_RULE) _IT_SUBST(INTLTOOL_UI_RULE) _IT_SUBST(INTLTOOL_XAM_RULE) _IT_SUBST(INTLTOOL_KBD_RULE) _IT_SUBST(INTLTOOL_XML_RULE) _IT_SUBST(INTLTOOL_XML_NOMERGE_RULE) _IT_SUBST(INTLTOOL_CAVES_RULE) _IT_SUBST(INTLTOOL_SCHEMAS_RULE) _IT_SUBST(INTLTOOL_THEME_RULE) _IT_SUBST(INTLTOOL_SERVICE_RULE) _IT_SUBST(INTLTOOL_POLICY_RULE) # Check the gettext tools to make sure they are GNU AC_PATH_PROG(XGETTEXT, xgettext) AC_PATH_PROG(MSGMERGE, msgmerge) AC_PATH_PROG(MSGFMT, msgfmt) AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) fi xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) fi AC_PATH_PROG(INTLTOOL_PERL, perl) if test -z "$INTLTOOL_PERL"; then AC_MSG_ERROR([perl not found]) fi AC_MSG_CHECKING([for perl >= 5.8.1]) $INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 if test $? -ne 0; then AC_MSG_ERROR([perl 5.8.1 is required for intltool]) else IT_PERL_VERSION=`$INTLTOOL_PERL -e "printf '%vd', $^V"` AC_MSG_RESULT([$IT_PERL_VERSION]) fi if test "x$2" != "xno-xml"; then AC_MSG_CHECKING([for XML::Parser]) if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then AC_MSG_RESULT([ok]) else AC_MSG_ERROR([XML::Parser perl module is required for intltool]) fi fi # Substitute ALL_LINGUAS so we can use it in po/Makefile AC_SUBST(ALL_LINGUAS) # Set DATADIRNAME correctly if it is not set yet # (copied from glib-gettext.m4) if test -z "$DATADIRNAME"; then AC_LINK_IFELSE( [AC_LANG_PROGRAM([[]], [[extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr]])], [DATADIRNAME=share], [case $host in *-*-solaris*) dnl On Solaris, if bind_textdomain_codeset is in libc, dnl GNU format message catalog is always supported, dnl since both are added to the libc all together. dnl Hence, we'd like to go with DATADIRNAME=share dnl in this case. AC_CHECK_FUNC(bind_textdomain_codeset, [DATADIRNAME=share], [DATADIRNAME=lib]) ;; *) [DATADIRNAME=lib] ;; esac]) fi AC_SUBST(DATADIRNAME) IT_PO_SUBDIR([po]) ]) # IT_PO_SUBDIR(DIRNAME) # --------------------- # All po subdirs have to be declared with this macro; the subdir "po" is # declared by IT_PROG_INTLTOOL. # AC_DEFUN([IT_PO_SUBDIR], [AC_PREREQ([2.53])dnl We use ac_top_srcdir inside AC_CONFIG_COMMANDS. dnl dnl The following CONFIG_COMMANDS should be executed at the very end dnl of config.status. AC_CONFIG_COMMANDS_PRE([ AC_CONFIG_COMMANDS([$1/stamp-it], [ if [ ! grep "^# INTLTOOL_MAKEFILE$" "$1/Makefile.in" > /dev/null ]; then AC_MSG_ERROR([$1/Makefile.in.in was not created by intltoolize.]) fi rm -f "$1/stamp-it" "$1/stamp-it.tmp" "$1/POTFILES" "$1/Makefile.tmp" >"$1/stamp-it.tmp" [sed '/^#/d s/^[[].*] *// /^[ ]*$/d '"s|^| $ac_top_srcdir/|" \ "$srcdir/$1/POTFILES.in" | sed '$!s/$/ \\/' >"$1/POTFILES" ] [sed '/^POTFILES =/,/[^\\]$/ { /^POTFILES =/!d r $1/POTFILES } ' "$1/Makefile.in" >"$1/Makefile"] rm -f "$1/Makefile.tmp" mv "$1/stamp-it.tmp" "$1/stamp-it" ]) ])dnl ]) # _IT_SUBST(VARIABLE) # ------------------- # Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST # AC_DEFUN([_IT_SUBST], [ AC_SUBST([$1]) m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])]) ] ) # deprecated macros AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL]) # A hint is needed for aclocal from Automake <= 1.9.4: # AC_DEFUN([AC_PROG_INTLTOOL], ...) parlatype-1.5.4/m4/ltoptions.m40000644000175000017500000003007313167645076013302 00000000000000# Helper functions for option handling. -*- Autoconf -*- # # Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, # Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 7 ltoptions.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) # _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) # ------------------------------------------ m4_define([_LT_MANGLE_OPTION], [[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) # _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) # --------------------------------------- # Set option OPTION-NAME for macro MACRO-NAME, and if there is a # matching handler defined, dispatch to it. Other OPTION-NAMEs are # saved as a flag. m4_define([_LT_SET_OPTION], [m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), _LT_MANGLE_DEFUN([$1], [$2]), [m4_warning([Unknown $1 option `$2'])])[]dnl ]) # _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) # ------------------------------------------------------------ # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. m4_define([_LT_IF_OPTION], [m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) # _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) # ------------------------------------------------------- # Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME # are set. m4_define([_LT_UNLESS_OPTIONS], [m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), [m4_define([$0_found])])])[]dnl m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 ])[]dnl ]) # _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) # ---------------------------------------- # OPTION-LIST is a space-separated list of Libtool options associated # with MACRO-NAME. If any OPTION has a matching handler declared with # LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about # the unknown option and exit. m4_defun([_LT_SET_OPTIONS], [# Set options m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [_LT_SET_OPTION([$1], _LT_Option)]) m4_if([$1],[LT_INIT],[ dnl dnl Simply set some default values (i.e off) if boolean options were not dnl specified: _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no ]) _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no ]) dnl dnl If no reference was made to various pairs of opposing options, then dnl we run the default mode handler for the pair. For example, if neither dnl `shared' nor `disable-shared' was passed, we enable building of shared dnl archives by default: _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], [_LT_ENABLE_FAST_INSTALL]) ]) ])# _LT_SET_OPTIONS ## --------------------------------- ## ## Macros to handle LT_INIT options. ## ## --------------------------------- ## # _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) # ----------------------------------------- m4_define([_LT_MANGLE_DEFUN], [[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) # LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) # ----------------------------------------------- m4_define([LT_OPTION_DEFINE], [m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl ])# LT_OPTION_DEFINE # dlopen # ------ LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes ]) AU_DEFUN([AC_LIBTOOL_DLOPEN], [_LT_SET_OPTION([LT_INIT], [dlopen]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `dlopen' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) # win32-dll # --------- # Declare package support for building win32 dll's. LT_OPTION_DEFINE([LT_INIT], [win32-dll], [enable_win32_dll=yes case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) ;; esac test -z "$AS" && AS=as _LT_DECL([], [AS], [1], [Assembler program])dnl test -z "$DLLTOOL" && DLLTOOL=dlltool _LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl ])# win32-dll AU_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_REQUIRE([AC_CANONICAL_HOST])dnl _LT_SET_OPTION([LT_INIT], [win32-dll]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `win32-dll' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) # _LT_ENABLE_SHARED([DEFAULT]) # ---------------------------- # implement the --enable-shared flag, and supports the `shared' and # `disable-shared' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_SHARED], [m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([shared], [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) _LT_DECL([build_libtool_libs], [enable_shared], [0], [Whether or not to build shared libraries]) ])# _LT_ENABLE_SHARED LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) # Old names: AC_DEFUN([AC_ENABLE_SHARED], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) ]) AC_DEFUN([AC_DISABLE_SHARED], [_LT_SET_OPTION([LT_INIT], [disable-shared]) ]) AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_SHARED], []) dnl AC_DEFUN([AM_DISABLE_SHARED], []) # _LT_ENABLE_STATIC([DEFAULT]) # ---------------------------- # implement the --enable-static flag, and support the `static' and # `disable-static' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_STATIC], [m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([static], [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_static=]_LT_ENABLE_STATIC_DEFAULT) _LT_DECL([build_old_libs], [enable_static], [0], [Whether or not to build static libraries]) ])# _LT_ENABLE_STATIC LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) # Old names: AC_DEFUN([AC_ENABLE_STATIC], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) ]) AC_DEFUN([AC_DISABLE_STATIC], [_LT_SET_OPTION([LT_INIT], [disable-static]) ]) AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_STATIC], []) dnl AC_DEFUN([AM_DISABLE_STATIC], []) # _LT_ENABLE_FAST_INSTALL([DEFAULT]) # ---------------------------------- # implement the --enable-fast-install flag, and support the `fast-install' # and `disable-fast-install' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_FAST_INSTALL], [m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([fast-install], [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) _LT_DECL([fast_install], [enable_fast_install], [0], [Whether or not to optimize for fast installation])dnl ])# _LT_ENABLE_FAST_INSTALL LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) # Old names: AU_DEFUN([AC_ENABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `fast-install' option into LT_INIT's first parameter.]) ]) AU_DEFUN([AC_DISABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], [disable-fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `disable-fast-install' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) # _LT_WITH_PIC([MODE]) # -------------------- # implement the --with-pic flag, and support the `pic-only' and `no-pic' # LT_INIT options. # MODE is either `yes' or `no'. If omitted, it defaults to `both'. m4_define([_LT_WITH_PIC], [AC_ARG_WITH([pic], [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], [lt_p=${PACKAGE-default} case $withval in yes|no) pic_mode=$withval ;; *) pic_mode=default # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for lt_pkg in $withval; do IFS="$lt_save_ifs" if test "X$lt_pkg" = "X$lt_p"; then pic_mode=yes fi done IFS="$lt_save_ifs" ;; esac], [pic_mode=default]) test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) _LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl ])# _LT_WITH_PIC LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) # Old name: AU_DEFUN([AC_LIBTOOL_PICMODE], [_LT_SET_OPTION([LT_INIT], [pic-only]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `pic-only' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) ## ----------------- ## ## LTDL_INIT Options ## ## ----------------- ## m4_define([_LTDL_MODE], []) LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], [m4_define([_LTDL_MODE], [nonrecursive])]) LT_OPTION_DEFINE([LTDL_INIT], [recursive], [m4_define([_LTDL_MODE], [recursive])]) LT_OPTION_DEFINE([LTDL_INIT], [subproject], [m4_define([_LTDL_MODE], [subproject])]) m4_define([_LTDL_TYPE], []) LT_OPTION_DEFINE([LTDL_INIT], [installable], [m4_define([_LTDL_TYPE], [installable])]) LT_OPTION_DEFINE([LTDL_INIT], [convenience], [m4_define([_LTDL_TYPE], [convenience])]) parlatype-1.5.4/m4/ltversion.m40000644000175000017500000000126213167645077013273 00000000000000# ltversion.m4 -- version numbers -*- Autoconf -*- # # Copyright (C) 2004 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # @configure_input@ # serial 3337 ltversion.m4 # This file is part of GNU Libtool m4_define([LT_PACKAGE_VERSION], [2.4.2]) m4_define([LT_PACKAGE_REVISION], [1.3337]) AC_DEFUN([LTVERSION_VERSION], [macro_version='2.4.2' macro_revision='1.3337' _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) _LT_DECL(, macro_revision, 0) ]) parlatype-1.5.4/m4/ltsugar.m40000644000175000017500000001042413167645076012726 00000000000000# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- # # Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 6 ltsugar.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) # lt_join(SEP, ARG1, [ARG2...]) # ----------------------------- # Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their # associated separator. # Needed until we can rely on m4_join from Autoconf 2.62, since all earlier # versions in m4sugar had bugs. m4_define([lt_join], [m4_if([$#], [1], [], [$#], [2], [[$2]], [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) m4_define([_lt_join], [m4_if([$#$2], [2], [], [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) # lt_car(LIST) # lt_cdr(LIST) # ------------ # Manipulate m4 lists. # These macros are necessary as long as will still need to support # Autoconf-2.59 which quotes differently. m4_define([lt_car], [[$1]]) m4_define([lt_cdr], [m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], [$#], 1, [], [m4_dquote(m4_shift($@))])]) m4_define([lt_unquote], $1) # lt_append(MACRO-NAME, STRING, [SEPARATOR]) # ------------------------------------------ # Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. # Note that neither SEPARATOR nor STRING are expanded; they are appended # to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). # No SEPARATOR is output if MACRO-NAME was previously undefined (different # than defined and empty). # # This macro is needed until we can rely on Autoconf 2.62, since earlier # versions of m4sugar mistakenly expanded SEPARATOR but not STRING. m4_define([lt_append], [m4_define([$1], m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) # lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) # ---------------------------------------------------------- # Produce a SEP delimited list of all paired combinations of elements of # PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list # has the form PREFIXmINFIXSUFFIXn. # Needed until we can rely on m4_combine added in Autoconf 2.62. m4_define([lt_combine], [m4_if(m4_eval([$# > 3]), [1], [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl [[m4_foreach([_Lt_prefix], [$2], [m4_foreach([_Lt_suffix], ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) # lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) # ----------------------------------------------------------------------- # Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited # by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. m4_define([lt_if_append_uniq], [m4_ifdef([$1], [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], [lt_append([$1], [$2], [$3])$4], [$5])], [lt_append([$1], [$2], [$3])$4])]) # lt_dict_add(DICT, KEY, VALUE) # ----------------------------- m4_define([lt_dict_add], [m4_define([$1($2)], [$3])]) # lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) # -------------------------------------------- m4_define([lt_dict_add_subkey], [m4_define([$1($2:$3)], [$4])]) # lt_dict_fetch(DICT, KEY, [SUBKEY]) # ---------------------------------- m4_define([lt_dict_fetch], [m4_ifval([$3], m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) # lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) # ----------------------------------------------------------------- m4_define([lt_if_dict_fetch], [m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], [$5], [$6])]) # lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) # -------------------------------------------------------------- m4_define([lt_dict_filter], [m4_if([$5], [], [], [lt_join(m4_quote(m4_default([$4], [[, ]])), lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl ]) parlatype-1.5.4/m4/libtool.m40000644000175000017500000106011113167645076012710 00000000000000# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008, 2009, 2010, 2011 Free Software # Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. m4_define([_LT_COPYING], [dnl # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008, 2009, 2010, 2011 Free Software # Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. # # GNU Libtool is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, or # obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ]) # serial 57 LT_INIT # LT_PREREQ(VERSION) # ------------------ # Complain and exit if this libtool version is less that VERSION. m4_defun([LT_PREREQ], [m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, [m4_default([$3], [m4_fatal([Libtool version $1 or higher is required], 63)])], [$2])]) # _LT_CHECK_BUILDDIR # ------------------ # Complain if the absolute build directory name contains unusual characters m4_defun([_LT_CHECK_BUILDDIR], [case `pwd` in *\ * | *\ *) AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; esac ]) # LT_INIT([OPTIONS]) # ------------------ AC_DEFUN([LT_INIT], [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl AC_BEFORE([$0], [LT_LANG])dnl AC_BEFORE([$0], [LT_OUTPUT])dnl AC_BEFORE([$0], [LTDL_INIT])dnl m4_require([_LT_CHECK_BUILDDIR])dnl dnl Autoconf doesn't catch unexpanded LT_ macros by default: m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 dnl unless we require an AC_DEFUNed macro: AC_REQUIRE([LTOPTIONS_VERSION])dnl AC_REQUIRE([LTSUGAR_VERSION])dnl AC_REQUIRE([LTVERSION_VERSION])dnl AC_REQUIRE([LTOBSOLETE_VERSION])dnl m4_require([_LT_PROG_LTMAIN])dnl _LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) dnl Parse OPTIONS _LT_SET_OPTIONS([$0], [$1]) # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ltmain" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl _LT_SETUP # Only expand once: m4_define([LT_INIT]) ])# LT_INIT # Old names: AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PROG_LIBTOOL], []) dnl AC_DEFUN([AM_PROG_LIBTOOL], []) # _LT_CC_BASENAME(CC) # ------------------- # Calculate cc_basename. Skip known compiler wrappers and cross-prefix. m4_defun([_LT_CC_BASENAME], [for cc_temp in $1""; do case $cc_temp in compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` ]) # _LT_FILEUTILS_DEFAULTS # ---------------------- # It is okay to use these file commands and assume they have been set # sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. m4_defun([_LT_FILEUTILS_DEFAULTS], [: ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} ])# _LT_FILEUTILS_DEFAULTS # _LT_SETUP # --------- m4_defun([_LT_SETUP], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl _LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl dnl _LT_DECL([], [host_alias], [0], [The host system])dnl _LT_DECL([], [host], [0])dnl _LT_DECL([], [host_os], [0])dnl dnl _LT_DECL([], [build_alias], [0], [The build system])dnl _LT_DECL([], [build], [0])dnl _LT_DECL([], [build_os], [0])dnl dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl dnl AC_REQUIRE([AC_PROG_LN_S])dnl test -z "$LN_S" && LN_S="ln -s" _LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl dnl AC_REQUIRE([LT_CMD_MAX_LEN])dnl _LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl _LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl m4_require([_LT_CMD_RELOAD])dnl m4_require([_LT_CHECK_MAGIC_METHOD])dnl m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl m4_require([_LT_CMD_OLD_ARCHIVE])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_WITH_SYSROOT])dnl _LT_CONFIG_LIBTOOL_INIT([ # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi ]) if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi _LT_CHECK_OBJDIR m4_require([_LT_TAG_COMPILER])dnl case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld="$lt_cv_prog_gnu_ld" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o _LT_CC_BASENAME([$compiler]) # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then _LT_PATH_MAGIC fi ;; esac # Use C for the default configuration in the libtool script LT_SUPPORTED_TAG([CC]) _LT_LANG_C_CONFIG _LT_LANG_DEFAULT_CONFIG _LT_CONFIG_COMMANDS ])# _LT_SETUP # _LT_PREPARE_SED_QUOTE_VARS # -------------------------- # Define a few sed substitution that help us do robust quoting. m4_defun([_LT_PREPARE_SED_QUOTE_VARS], [# Backslashify metacharacters that are still active within # double-quoted strings. sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\([["`\\]]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' ]) # _LT_PROG_LTMAIN # --------------- # Note that this code is called both from `configure', and `config.status' # now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, # `config.status' has no value for ac_aux_dir unless we are using Automake, # so we pass a copy along to make sure it has a sensible value anyway. m4_defun([_LT_PROG_LTMAIN], [m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl _LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) ltmain="$ac_aux_dir/ltmain.sh" ])# _LT_PROG_LTMAIN ## ------------------------------------- ## ## Accumulate code for creating libtool. ## ## ------------------------------------- ## # So that we can recreate a full libtool script including additional # tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS # in macros and then make a single call at the end using the `libtool' # label. # _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) # ---------------------------------------- # Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL_INIT], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_INIT], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_INIT]) # _LT_CONFIG_LIBTOOL([COMMANDS]) # ------------------------------ # Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) # _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) # ----------------------------------------------------- m4_defun([_LT_CONFIG_SAVE_COMMANDS], [_LT_CONFIG_LIBTOOL([$1]) _LT_CONFIG_LIBTOOL_INIT([$2]) ]) # _LT_FORMAT_COMMENT([COMMENT]) # ----------------------------- # Add leading comment marks to the start of each line, and a trailing # full-stop to the whole comment if one is not present already. m4_define([_LT_FORMAT_COMMENT], [m4_ifval([$1], [ m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) )]) ## ------------------------ ## ## FIXME: Eliminate VARNAME ## ## ------------------------ ## # _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) # ------------------------------------------------------------------- # CONFIGNAME is the name given to the value in the libtool script. # VARNAME is the (base) name used in the configure script. # VALUE may be 0, 1 or 2 for a computed quote escaped value based on # VARNAME. Any other value will be used directly. m4_define([_LT_DECL], [lt_if_append_uniq([lt_decl_varnames], [$2], [, ], [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], [m4_ifval([$1], [$1], [$2])]) lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) m4_ifval([$4], [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) lt_dict_add_subkey([lt_decl_dict], [$2], [tagged?], [m4_ifval([$5], [yes], [no])])]) ]) # _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) # -------------------------------------------------------- m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) # lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_tag_varnames], [_lt_decl_filter([tagged?], [yes], $@)]) # _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) # --------------------------------------------------------- m4_define([_lt_decl_filter], [m4_case([$#], [0], [m4_fatal([$0: too few arguments: $#])], [1], [m4_fatal([$0: too few arguments: $#: $1])], [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], [lt_dict_filter([lt_decl_dict], $@)])[]dnl ]) # lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) # -------------------------------------------------- m4_define([lt_decl_quote_varnames], [_lt_decl_filter([value], [1], $@)]) # lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_dquote_varnames], [_lt_decl_filter([value], [2], $@)]) # lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_varnames_tagged], [m4_assert([$# <= 2])dnl _$0(m4_quote(m4_default([$1], [[, ]])), m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) m4_define([_lt_decl_varnames_tagged], [m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) # lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_all_varnames], [_$0(m4_quote(m4_default([$1], [[, ]])), m4_if([$2], [], m4_quote(lt_decl_varnames), m4_quote(m4_shift($@))))[]dnl ]) m4_define([_lt_decl_all_varnames], [lt_join($@, lt_decl_varnames_tagged([$1], lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl ]) # _LT_CONFIG_STATUS_DECLARE([VARNAME]) # ------------------------------------ # Quote a variable value, and forward it to `config.status' so that its # declaration there will have the same value as in `configure'. VARNAME # must have a single quote delimited value for this to work. m4_define([_LT_CONFIG_STATUS_DECLARE], [$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) # _LT_CONFIG_STATUS_DECLARATIONS # ------------------------------ # We delimit libtool config variables with single quotes, so when # we write them to config.status, we have to be sure to quote all # embedded single quotes properly. In configure, this macro expands # each variable declared with _LT_DECL (and _LT_TAGDECL) into: # # ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAGS # ---------------- # Output comment and list of tags supported by the script m4_defun([_LT_LIBTOOL_TAGS], [_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl available_tags="_LT_TAGS"dnl ]) # _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) # ----------------------------------- # Extract the dictionary values for VARNAME (optionally with TAG) and # expand to a commented shell variable setting: # # # Some comment about what VAR is for. # visible_name=$lt_internal_name m4_define([_LT_LIBTOOL_DECLARE], [_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [description])))[]dnl m4_pushdef([_libtool_name], m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), [0], [_libtool_name=[$]$1], [1], [_libtool_name=$lt_[]$1], [2], [_libtool_name=$lt_[]$1], [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl ]) # _LT_LIBTOOL_CONFIG_VARS # ----------------------- # Produce commented declarations of non-tagged libtool config variables # suitable for insertion in the LIBTOOL CONFIG section of the `libtool' # script. Tagged libtool config variables (even for the LIBTOOL CONFIG # section) are produced by _LT_LIBTOOL_TAG_VARS. m4_defun([_LT_LIBTOOL_CONFIG_VARS], [m4_foreach([_lt_var], m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAG_VARS(TAG) # ------------------------- m4_define([_LT_LIBTOOL_TAG_VARS], [m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) # _LT_TAGVAR(VARNAME, [TAGNAME]) # ------------------------------ m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) # _LT_CONFIG_COMMANDS # ------------------- # Send accumulated output to $CONFIG_STATUS. Thanks to the lists of # variables for single and double quote escaping we saved from calls # to _LT_DECL, we can put quote escaped variables declarations # into `config.status', and then the shell code to quote escape them in # for loops in `config.status'. Finally, any additional code accumulated # from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. m4_defun([_LT_CONFIG_COMMANDS], [AC_PROVIDE_IFELSE([LT_OUTPUT], dnl If the libtool generation code has been placed in $CONFIG_LT, dnl instead of duplicating it all over again into config.status, dnl then we will have config.status run $CONFIG_LT later, so it dnl needs to know what name is stored there: [AC_CONFIG_COMMANDS([libtool], [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], dnl If the libtool generation code is destined for config.status, dnl expand the accumulated commands and init code now: [AC_CONFIG_COMMANDS([libtool], [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) ])#_LT_CONFIG_COMMANDS # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], [ # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' _LT_CONFIG_STATUS_DECLARATIONS LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$[]1 _LTECHO_EOF' } # Quote evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_quote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_dquote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done _LT_OUTPUT_LIBTOOL_INIT ]) # _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) # ------------------------------------ # Generate a child script FILE with all initialization necessary to # reuse the environment learned by the parent script, and make the # file executable. If COMMENT is supplied, it is inserted after the # `#!' sequence but before initialization text begins. After this # macro, additional text can be appended to FILE to form the body of # the child script. The macro ends with non-zero status if the # file could not be fully written (such as if the disk is full). m4_ifdef([AS_INIT_GENERATED], [m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], [m4_defun([_LT_GENERATED_FILE_INIT], [m4_require([AS_PREPARE])]dnl [m4_pushdef([AS_MESSAGE_LOG_FD])]dnl [lt_write_fail=0 cat >$1 <<_ASEOF || lt_write_fail=1 #! $SHELL # Generated by $as_me. $2 SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$1 <<\_ASEOF || lt_write_fail=1 AS_SHELL_SANITIZE _AS_PREPARE exec AS_MESSAGE_FD>&1 _ASEOF test $lt_write_fail = 0 && chmod +x $1[]dnl m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT # LT_OUTPUT # --------- # This macro allows early generation of the libtool script (before # AC_OUTPUT is called), incase it is used in configure for compilation # tests. AC_DEFUN([LT_OUTPUT], [: ${CONFIG_LT=./config.lt} AC_MSG_NOTICE([creating $CONFIG_LT]) _LT_GENERATED_FILE_INIT(["$CONFIG_LT"], [# Run this file to recreate a libtool stub with the current configuration.]) cat >>"$CONFIG_LT" <<\_LTEOF lt_cl_silent=false exec AS_MESSAGE_LOG_FD>>config.log { echo AS_BOX([Running $as_me.]) } >&AS_MESSAGE_LOG_FD lt_cl_help="\ \`$as_me' creates a local libtool stub from the current configuration, for use in further configure time tests before the real libtool is generated. Usage: $[0] [[OPTIONS]] -h, --help print this help, then exit -V, --version print version number, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files Report bugs to ." lt_cl_version="\ m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) configured by $[0], generated by m4_PACKAGE_STRING. Copyright (C) 2011 Free Software Foundation, Inc. This config.lt script is free software; the Free Software Foundation gives unlimited permision to copy, distribute and modify it." while test $[#] != 0 do case $[1] in --version | --v* | -V ) echo "$lt_cl_version"; exit 0 ;; --help | --h* | -h ) echo "$lt_cl_help"; exit 0 ;; --debug | --d* | -d ) debug=: ;; --quiet | --q* | --silent | --s* | -q ) lt_cl_silent=: ;; -*) AC_MSG_ERROR([unrecognized option: $[1] Try \`$[0] --help' for more information.]) ;; *) AC_MSG_ERROR([unrecognized argument: $[1] Try \`$[0] --help' for more information.]) ;; esac shift done if $lt_cl_silent; then exec AS_MESSAGE_FD>/dev/null fi _LTEOF cat >>"$CONFIG_LT" <<_LTEOF _LT_OUTPUT_LIBTOOL_COMMANDS_INIT _LTEOF cat >>"$CONFIG_LT" <<\_LTEOF AC_MSG_NOTICE([creating $ofile]) _LT_OUTPUT_LIBTOOL_COMMANDS AS_EXIT(0) _LTEOF chmod +x "$CONFIG_LT" # configure is writing to config.log, but config.lt does its own redirection, # appending to config.log, which fails on DOS, as config.log is still kept # open by configure. Here we exec the FD to /dev/null, effectively closing # config.log, so it can be properly (re)opened and appended to by config.lt. lt_cl_success=: test "$silent" = yes && lt_config_lt_args="$lt_config_lt_args --quiet" exec AS_MESSAGE_LOG_FD>/dev/null $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false exec AS_MESSAGE_LOG_FD>>config.log $lt_cl_success || AS_EXIT(1) ])# LT_OUTPUT # _LT_CONFIG(TAG) # --------------- # If TAG is the built-in tag, create an initial libtool script with a # default configuration from the untagged config vars. Otherwise add code # to config.status for appending the configuration named by TAG from the # matching tagged config vars. m4_defun([_LT_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_CONFIG_SAVE_COMMANDS([ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl m4_if(_LT_TAG, [C], [ # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi cfgfile="${ofile}T" trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # _LT_COPYING _LT_LIBTOOL_TAGS # ### BEGIN LIBTOOL CONFIG _LT_LIBTOOL_CONFIG_VARS _LT_LIBTOOL_TAG_VARS # ### END LIBTOOL CONFIG _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac _LT_PROG_LTMAIN # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) _LT_PROG_REPLACE_SHELLFNS mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ], [cat <<_LT_EOF >> "$ofile" dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded dnl in a comment (ie after a #). # ### BEGIN LIBTOOL TAG CONFIG: $1 _LT_LIBTOOL_TAG_VARS(_LT_TAG) # ### END LIBTOOL TAG CONFIG: $1 _LT_EOF ])dnl /m4_if ], [m4_if([$1], [], [ PACKAGE='$PACKAGE' VERSION='$VERSION' TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile'], []) ])dnl /_LT_CONFIG_SAVE_COMMANDS ])# _LT_CONFIG # LT_SUPPORTED_TAG(TAG) # --------------------- # Trace this macro to discover what tags are supported by the libtool # --tag option, using: # autoconf --trace 'LT_SUPPORTED_TAG:$1' AC_DEFUN([LT_SUPPORTED_TAG], []) # C support is built-in for now m4_define([_LT_LANG_C_enabled], []) m4_define([_LT_TAGS], []) # LT_LANG(LANG) # ------------- # Enable libtool support for the given language if not already enabled. AC_DEFUN([LT_LANG], [AC_BEFORE([$0], [LT_OUTPUT])dnl m4_case([$1], [C], [_LT_LANG(C)], [C++], [_LT_LANG(CXX)], [Go], [_LT_LANG(GO)], [Java], [_LT_LANG(GCJ)], [Fortran 77], [_LT_LANG(F77)], [Fortran], [_LT_LANG(FC)], [Windows Resource], [_LT_LANG(RC)], [m4_ifdef([_LT_LANG_]$1[_CONFIG], [_LT_LANG($1)], [m4_fatal([$0: unsupported language: "$1"])])])dnl ])# LT_LANG # _LT_LANG(LANGNAME) # ------------------ m4_defun([_LT_LANG], [m4_ifdef([_LT_LANG_]$1[_enabled], [], [LT_SUPPORTED_TAG([$1])dnl m4_append([_LT_TAGS], [$1 ])dnl m4_define([_LT_LANG_]$1[_enabled], [])dnl _LT_LANG_$1_CONFIG($1)])dnl ])# _LT_LANG m4_ifndef([AC_PROG_GO], [ ############################################################ # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_GO. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # ############################################################ m4_defun([AC_PROG_GO], [AC_LANG_PUSH(Go)dnl AC_ARG_VAR([GOC], [Go compiler command])dnl AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl _AC_ARG_VAR_LDFLAGS()dnl AC_CHECK_TOOL(GOC, gccgo) if test -z "$GOC"; then if test -n "$ac_tool_prefix"; then AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) fi fi if test -z "$GOC"; then AC_CHECK_PROG(GOC, gccgo, gccgo, false) fi ])#m4_defun ])#m4_ifndef # _LT_LANG_DEFAULT_CONFIG # ----------------------- m4_defun([_LT_LANG_DEFAULT_CONFIG], [AC_PROVIDE_IFELSE([AC_PROG_CXX], [LT_LANG(CXX)], [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) AC_PROVIDE_IFELSE([AC_PROG_F77], [LT_LANG(F77)], [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) AC_PROVIDE_IFELSE([AC_PROG_FC], [LT_LANG(FC)], [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal dnl pulling things in needlessly. AC_PROVIDE_IFELSE([AC_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([LT_PROG_GCJ], [LT_LANG(GCJ)], [m4_ifdef([AC_PROG_GCJ], [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([A][M_PROG_GCJ], [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([LT_PROG_GCJ], [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) AC_PROVIDE_IFELSE([AC_PROG_GO], [LT_LANG(GO)], [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) AC_PROVIDE_IFELSE([LT_PROG_RC], [LT_LANG(RC)], [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) ])# _LT_LANG_DEFAULT_CONFIG # Obsolete macros: AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_CXX], []) dnl AC_DEFUN([AC_LIBTOOL_F77], []) dnl AC_DEFUN([AC_LIBTOOL_FC], []) dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) dnl AC_DEFUN([AC_LIBTOOL_RC], []) # _LT_TAG_COMPILER # ---------------- m4_defun([_LT_TAG_COMPILER], [AC_REQUIRE([AC_PROG_CC])dnl _LT_DECL([LTCC], [CC], [1], [A C compiler])dnl _LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl _LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl _LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC ])# _LT_TAG_COMPILER # _LT_COMPILER_BOILERPLATE # ------------------------ # Check for compiler boilerplate output or warnings with # the simple compiler test code. m4_defun([_LT_COMPILER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ])# _LT_COMPILER_BOILERPLATE # _LT_LINKER_BOILERPLATE # ---------------------- # Check for linker boilerplate output or warnings with # the simple link test code. m4_defun([_LT_LINKER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* ])# _LT_LINKER_BOILERPLATE # _LT_REQUIRED_DARWIN_CHECKS # ------------------------- m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ case $host_os in rhapsody* | darwin*) AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) AC_CHECK_TOOL([LIPO], [lipo], [:]) AC_CHECK_TOOL([OTOOL], [otool], [:]) AC_CHECK_TOOL([OTOOL64], [otool64], [:]) _LT_DECL([], [DSYMUTIL], [1], [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) _LT_DECL([], [NMEDIT], [1], [Tool to change global to local symbols on Mac OS X]) _LT_DECL([], [LIPO], [1], [Tool to manipulate fat objects and archives on Mac OS X]) _LT_DECL([], [OTOOL], [1], [ldd/readelf like tool for Mach-O binaries on Mac OS X]) _LT_DECL([], [OTOOL64], [1], [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], [lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? # If there is a non-empty error log, and "single_module" # appears in it, assume the flag caused a linker warning if test -s conftest.err && $GREP single_module conftest.err; then cat conftest.err >&AS_MESSAGE_LOG_FD # Otherwise, if the output was created with a 0 exit code from # the compiler, it worked. elif test -f libconftest.dylib && test $_lt_result -eq 0; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&AS_MESSAGE_LOG_FD fi rm -rf libconftest.dylib* rm -f conftest.* fi]) AC_CACHE_CHECK([for -exported_symbols_list linker flag], [lt_cv_ld_exported_symbols_list], [lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [lt_cv_ld_exported_symbols_list=yes], [lt_cv_ld_exported_symbols_list=no]) LDFLAGS="$save_LDFLAGS" ]) AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], [lt_cv_ld_force_load=no cat > conftest.c << _LT_EOF int forced_loaded() { return 2;} _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD cat > conftest.c << _LT_EOF int main() { return 0;} _LT_EOF echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err _lt_result=$? if test -s conftest.err && $GREP force_load conftest.err; then cat conftest.err >&AS_MESSAGE_LOG_FD elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then lt_cv_ld_force_load=yes else cat conftest.err >&AS_MESSAGE_LOG_FD fi rm -f conftest.err libconftest.a conftest conftest.c rm -rf conftest.dSYM ]) case $host_os in rhapsody* | darwin1.[[012]]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[[012]]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac ]) # _LT_DARWIN_LINKER_FEATURES([TAG]) # --------------------------------- # Checks for linker and compiler features on darwin m4_defun([_LT_DARWIN_LINKER_FEATURES], [ m4_require([_LT_REQUIRED_DARWIN_CHECKS]) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported if test "$lt_cv_ld_force_load" = "yes"; then _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) else _LT_TAGVAR(whole_archive_flag_spec, $1)='' fi _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=func_echo_all _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" m4_if([$1], [CXX], [ if test "$lt_cv_apple_cc_single_mod" != "yes"; then _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" fi ],[]) else _LT_TAGVAR(ld_shlibs, $1)=no fi ]) # _LT_SYS_MODULE_PATH_AIX([TAGNAME]) # ---------------------------------- # Links a minimal program and checks the executable # for the system default hardcoded library path. In most cases, # this is /usr/lib:/lib, but when the MPI compilers are used # the location of the communication and MPI libs are included too. # If we don't find anything, use the default library path according # to the aix ld manual. # Store the results from the different compilers for each TAGNAME. # Allow to override them for all tags through lt_cv_aix_libpath. m4_defun([_LT_SYS_MODULE_PATH_AIX], [m4_require([_LT_DECL_SED])dnl if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ lt_aix_libpath_sed='[ /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }]' _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi],[]) if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" fi ]) aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) fi ])# _LT_SYS_MODULE_PATH_AIX # _LT_SHELL_INIT(ARG) # ------------------- m4_define([_LT_SHELL_INIT], [m4_divert_text([M4SH-INIT], [$1 ])])# _LT_SHELL_INIT # _LT_PROG_ECHO_BACKSLASH # ----------------------- # Find how we can fake an echo command that does not interpret backslash. # In particular, with Autoconf 2.60 or later we add some code to the start # of the generated configure script which will find a shell with a builtin # printf (which we can use as an echo command). m4_defun([_LT_PROG_ECHO_BACKSLASH], [ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO AC_MSG_CHECKING([how to print strings]) # Test print first, because it will be a builtin if present. if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='print -r --' elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='printf %s\n' else # Use this function as a fallback that always works. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $[]1 _LTECHO_EOF' } ECHO='func_fallback_echo' fi # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "$*" } case "$ECHO" in printf*) AC_MSG_RESULT([printf]) ;; print*) AC_MSG_RESULT([print -r]) ;; *) AC_MSG_RESULT([cat]) ;; esac m4_ifdef([_AS_DETECT_SUGGESTED], [_AS_DETECT_SUGGESTED([ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO PATH=/empty FPATH=/empty; export PATH FPATH test "X`printf %s $ECHO`" = "X$ECHO" \ || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) _LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) ])# _LT_PROG_ECHO_BACKSLASH # _LT_WITH_SYSROOT # ---------------- AC_DEFUN([_LT_WITH_SYSROOT], [AC_MSG_CHECKING([for sysroot]) AC_ARG_WITH([sysroot], [ --with-sysroot[=DIR] Search for dependent libraries within DIR (or the compiler's sysroot if not specified).], [], [with_sysroot=no]) dnl lt_sysroot will always be passed unquoted. We quote it here dnl in case the user passed a directory name. lt_sysroot= case ${with_sysroot} in #( yes) if test "$GCC" = yes; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( /*) lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` ;; #( no|'') ;; #( *) AC_MSG_RESULT([${with_sysroot}]) AC_MSG_ERROR([The sysroot must be an absolute path.]) ;; esac AC_MSG_RESULT([${lt_sysroot:-no}]) _LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl [dependent libraries, and in which our libraries should be installed.])]) # _LT_ENABLE_LOCK # --------------- m4_defun([_LT_ENABLE_LOCK], [AC_ARG_ENABLE([libtool-lock], [AS_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) case `/usr/bin/file conftest.o` in *x86-64*) LD="${LD-ld} -m elf32_x86_64" ;; *) LD="${LD-ld} -m elf_i386" ;; esac ;; powerpc64le-*) LD="${LD-ld} -m elf32lppclinux" ;; powerpc64-*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; powerpcle-*) LD="${LD-ld} -m elf64lppc" ;; powerpc-*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_PUSH(C) AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_POP]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; *-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) case $host in i?86-*-solaris*) LD="${LD-ld} -m elf_x86_64" ;; sparc*-*-solaris*) LD="${LD-ld} -m elf64_sparc" ;; esac # GNU ld 2.21 introduced _sol2 emulations. Use them if available. if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then LD="${LD-ld}_sol2" fi ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks="$enable_libtool_lock" ])# _LT_ENABLE_LOCK # _LT_PROG_AR # ----------- m4_defun([_LT_PROG_AR], [AC_CHECK_TOOLS(AR, [ar], false) : ${AR=ar} : ${AR_FLAGS=cru} _LT_DECL([], [AR], [1], [The archiver]) _LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], [lt_cv_ar_at_file=no AC_COMPILE_IFELSE([AC_LANG_PROGRAM], [echo conftest.$ac_objext > conftest.lst lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' AC_TRY_EVAL([lt_ar_try]) if test "$ac_status" -eq 0; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a AC_TRY_EVAL([lt_ar_try]) if test "$ac_status" -ne 0; then lt_cv_ar_at_file=@ fi fi rm -f conftest.* libconftest.a ]) ]) if test "x$lt_cv_ar_at_file" = xno; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file fi _LT_DECL([], [archiver_list_spec], [1], [How to feed a file listing to the archiver]) ])# _LT_PROG_AR # _LT_CMD_OLD_ARCHIVE # ------------------- m4_defun([_LT_CMD_OLD_ARCHIVE], [_LT_PROG_AR AC_CHECK_TOOL(STRIP, strip, :) test -z "$STRIP" && STRIP=: _LT_DECL([], [STRIP], [1], [A symbol stripping program]) AC_CHECK_TOOL(RANLIB, ranlib, :) test -z "$RANLIB" && RANLIB=: _LT_DECL([], [RANLIB], [1], [Commands used to install an old-style archive]) # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" fi case $host_os in darwin*) lock_old_archive_extraction=yes ;; *) lock_old_archive_extraction=no ;; esac _LT_DECL([], [old_postinstall_cmds], [2]) _LT_DECL([], [old_postuninstall_cmds], [2]) _LT_TAGDECL([], [old_archive_cmds], [2], [Commands used to build an old-style archive]) _LT_DECL([], [lock_old_archive_extraction], [0], [Whether to use a lock for old archive extraction]) ])# _LT_CMD_OLD_ARCHIVE # _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------------------- # Check whether the given compiler option works AC_DEFUN([_LT_COMPILER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$3" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi fi $RM conftest* ]) if test x"[$]$2" = xyes; then m4_if([$5], , :, [$5]) else m4_if([$6], , :, [$6]) fi ])# _LT_COMPILER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) # _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------- # Check whether the given linker option works AC_DEFUN([_LT_LINKER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $3" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi else $2=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" ]) if test x"[$]$2" = xyes; then m4_if([$4], , :, [$4]) else m4_if([$5], , :, [$5]) fi ])# _LT_LINKER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) # LT_CMD_MAX_LEN #--------------- AC_DEFUN([LT_CMD_MAX_LEN], [AC_REQUIRE([AC_CANONICAL_HOST])dnl # find the maximum length of command line arguments AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; mint*) # On MiNT this can take a long time and run out of memory. lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; os2*) # The test takes a long time on OS/2. lt_cv_sys_max_cmd_len=8192 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len" && \ test undefined != "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8 ; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac ]) if test -n $lt_cv_sys_max_cmd_len ; then AC_MSG_RESULT($lt_cv_sys_max_cmd_len) else AC_MSG_RESULT(none) fi max_cmd_len=$lt_cv_sys_max_cmd_len _LT_DECL([], [max_cmd_len], [0], [What is the maximum length of a command?]) ])# LT_CMD_MAX_LEN # Old name: AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) # _LT_HEADER_DLFCN # ---------------- m4_defun([_LT_HEADER_DLFCN], [AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl ])# _LT_HEADER_DLFCN # _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) # ---------------------------------------------------------------- m4_defun([_LT_TRY_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test "$cross_compiling" = yes; then : [$4] else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF [#line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; }] _LT_EOF if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; x$lt_dlneed_uscore) $2 ;; x$lt_dlunknown|x*) $3 ;; esac else : # compilation failed $3 fi fi rm -fr conftest* ])# _LT_TRY_DLOPEN_SELF # LT_SYS_DLOPEN_SELF # ------------------ AC_DEFUN([LT_SYS_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ]) ;; *) AC_CHECK_FUNC([shl_load], [lt_cv_dlopen="shl_load"], [AC_CHECK_LIB([dld], [shl_load], [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], [AC_CHECK_FUNC([dlopen], [lt_cv_dlopen="dlopen"], [AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [AC_CHECK_LIB([svld], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], [AC_CHECK_LIB([dld], [dld_link], [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) ]) ]) ]) ]) ]) ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" AC_CACHE_CHECK([whether a program can dlopen itself], lt_cv_dlopen_self, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ]) if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], lt_cv_dlopen_self_static, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ]) fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi _LT_DECL([dlopen_support], [enable_dlopen], [0], [Whether dlopen is supported]) _LT_DECL([dlopen_self], [enable_dlopen_self], [0], [Whether dlopen of programs is supported]) _LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], [Whether dlopen of statically linked programs is supported]) ])# LT_SYS_DLOPEN_SELF # Old name: AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) # _LT_COMPILER_C_O([TAGNAME]) # --------------------------- # Check to see if options -c and -o are simultaneously supported by compiler. # This macro does not hard code the compiler like AC_PROG_CC_C_O. m4_defun([_LT_COMPILER_C_O], [m4_require([_LT_DECL_SED])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi chmod u+w . 2>&AS_MESSAGE_LOG_FD $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* ]) _LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], [Does compiler simultaneously support -c and -o options?]) ])# _LT_COMPILER_C_O # _LT_COMPILER_FILE_LOCKS([TAGNAME]) # ---------------------------------- # Check to see if we can do hard links to lock some files if needed m4_defun([_LT_COMPILER_FILE_LOCKS], [m4_require([_LT_ENABLE_LOCK])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_COMPILER_C_O([$1]) hard_links="nottested" if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user AC_MSG_CHECKING([if we can lock with hard links]) hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no AC_MSG_RESULT([$hard_links]) if test "$hard_links" = no; then AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) need_locks=warn fi else need_locks=no fi _LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) ])# _LT_COMPILER_FILE_LOCKS # _LT_CHECK_OBJDIR # ---------------- m4_defun([_LT_CHECK_OBJDIR], [AC_CACHE_CHECK([for objdir], [lt_cv_objdir], [rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null]) objdir=$lt_cv_objdir _LT_DECL([], [objdir], [0], [The name of the directory that contains temporary libtool files])dnl m4_pattern_allow([LT_OBJDIR])dnl AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", [Define to the sub-directory in which libtool stores uninstalled libraries.]) ])# _LT_CHECK_OBJDIR # _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) # -------------------------------------- # Check hardcoding attributes. m4_defun([_LT_LINKER_HARDCODE_LIBPATH], [AC_MSG_CHECKING([how to hardcode library paths into programs]) _LT_TAGVAR(hardcode_action, $1)= if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || test -n "$_LT_TAGVAR(runpath_var, $1)" || test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then # We can hardcode non-existent directories. if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then # Linking always hardcodes the temporary library directory. _LT_TAGVAR(hardcode_action, $1)=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. _LT_TAGVAR(hardcode_action, $1)=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. _LT_TAGVAR(hardcode_action, $1)=unsupported fi AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi _LT_TAGDECL([], [hardcode_action], [0], [How to hardcode a shared library path into an executable]) ])# _LT_LINKER_HARDCODE_LIBPATH # _LT_CMD_STRIPLIB # ---------------- m4_defun([_LT_CMD_STRIPLIB], [m4_require([_LT_DECL_EGREP]) striplib= old_striplib= AC_MSG_CHECKING([whether stripping libraries is possible]) if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" AC_MSG_RESULT([yes]) else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) fi ;; *) AC_MSG_RESULT([no]) ;; esac fi _LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) _LT_DECL([], [striplib], [1]) ])# _LT_CMD_STRIPLIB # _LT_SYS_DYNAMIC_LINKER([TAG]) # ----------------------------- # PORTME Fill in your ld.so characteristics m4_defun([_LT_SYS_DYNAMIC_LINKER], [AC_REQUIRE([AC_CANONICAL_HOST])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_OBJDUMP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl AC_MSG_CHECKING([dynamic linker characteristics]) m4_if([$1], [], [ if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac case $host_os in mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; *) lt_sed_strip_eq="s,=/,/,g" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` ;; *) lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` ;; esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[[lt_foo]]++; } if (lt_freq[[lt_foo]] == 1) { print lt_foo; } }'` # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi]) library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[[4-9]]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[[01]] | aix4.[[01]].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[[45]]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' library_names_spec='${libname}.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec="$LIB" if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[[23]].*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[[01]]* | freebsdelf3.[[01]]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; haiku*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=yes sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[[3-9]]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], [lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], [lt_cv_shlibpath_overrides_runpath=yes])]) LDFLAGS=$save_LDFLAGS libdir=$save_libdir ]) shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[[89]] | openbsd2.[[89]].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac AC_MSG_RESULT([$dynamic_linker]) test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi _LT_DECL([], [variables_saved_for_relink], [1], [Variables whose values should be saved in libtool wrapper scripts and restored at link time]) _LT_DECL([], [need_lib_prefix], [0], [Do we need the "lib" prefix for modules?]) _LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) _LT_DECL([], [version_type], [0], [Library versioning type]) _LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) _LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) _LT_DECL([], [shlibpath_overrides_runpath], [0], [Is shlibpath searched before the hard-coded library search path?]) _LT_DECL([], [libname_spec], [1], [Format of library name prefix]) _LT_DECL([], [library_names_spec], [1], [[List of archive names. First name is the real one, the rest are links. The last name is the one that the linker finds with -lNAME]]) _LT_DECL([], [soname_spec], [1], [[The coded name of the library, if different from the real name]]) _LT_DECL([], [install_override_mode], [1], [Permission mode override for installation of shared libraries]) _LT_DECL([], [postinstall_cmds], [2], [Command to use after installation of a shared archive]) _LT_DECL([], [postuninstall_cmds], [2], [Command to use after uninstallation of a shared archive]) _LT_DECL([], [finish_cmds], [2], [Commands used to finish a libtool library installation in a directory]) _LT_DECL([], [finish_eval], [1], [[As "finish_cmds", except a single script fragment to be evaled but not shown]]) _LT_DECL([], [hardcode_into_libs], [0], [Whether we should hardcode library paths into libraries]) _LT_DECL([], [sys_lib_search_path_spec], [2], [Compile-time system search path for libraries]) _LT_DECL([], [sys_lib_dlsearch_path_spec], [2], [Run-time system search path for libraries]) ])# _LT_SYS_DYNAMIC_LINKER # _LT_PATH_TOOL_PREFIX(TOOL) # -------------------------- # find a file program which can recognize shared library AC_DEFUN([_LT_PATH_TOOL_PREFIX], [m4_require([_LT_DECL_EGREP])dnl AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in [[\\/*] | ?:[\\/]*]) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="m4_if([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$1; then lt_cv_path_MAGIC_CMD="$ac_dir/$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac]) MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi _LT_DECL([], [MAGIC_CMD], [0], [Used to examine libraries when file_magic_cmd begins with "file"])dnl ])# _LT_PATH_TOOL_PREFIX # Old name: AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) # _LT_PATH_MAGIC # -------------- # find a file program which can recognize a shared library m4_defun([_LT_PATH_MAGIC], [_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) else MAGIC_CMD=: fi fi ])# _LT_PATH_MAGIC # LT_PATH_LD # ---------- # find the pathname to the GNU or non-GNU linker AC_DEFUN([LT_PATH_LD], [AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_PROG_ECHO_BACKSLASH])dnl AC_ARG_WITH([gnu-ld], [AS_HELP_STRING([--with-gnu-ld], [assume the C compiler uses GNU ld @<:@default=no@:>@])], [test "$withval" = no || with_gnu_ld=yes], [with_gnu_ld=no])dnl ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by $CC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]]* | ?:[[\\/]]*) re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else # Keep this pattern in sync with the one in func_win32_libid. lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc*) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; haiku*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[[3-9]]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; esac ]) file_magic_glob= want_nocaseglob=no if test "$build" = "$host"; then case $host_os in mingw* | pw32*) if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then want_nocaseglob=yes else file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` fi ;; esac fi file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown _LT_DECL([], [deplibs_check_method], [1], [Method to check whether dependent libraries are shared objects]) _LT_DECL([], [file_magic_cmd], [1], [Command to use when deplibs_check_method = "file_magic"]) _LT_DECL([], [file_magic_glob], [1], [How to find potential files when deplibs_check_method = "file_magic"]) _LT_DECL([], [want_nocaseglob], [1], [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) ])# _LT_CHECK_MAGIC_METHOD # LT_PATH_NM # ---------- # find the pathname to a BSD- or MS-compatible name lister AC_DEFUN([LT_PATH_NM], [AC_REQUIRE([AC_PROG_CC])dnl AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done : ${lt_cv_path_NM=no} fi]) if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : # Let the user override the test. else AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in *COFF*) DUMPBIN="$DUMPBIN -symbols" ;; *) DUMPBIN=: ;; esac fi AC_SUBST([DUMPBIN]) if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" fi fi test -z "$NM" && NM=nm AC_SUBST([NM]) _LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], [lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) cat conftest.out >&AS_MESSAGE_LOG_FD if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest*]) ])# LT_PATH_NM # Old names: AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_PROG_NM], []) dnl AC_DEFUN([AC_PROG_NM], []) # _LT_CHECK_SHAREDLIB_FROM_LINKLIB # -------------------------------- # how to determine the name of the shared library # associated with a specific link library. # -- PORTME fill in with the dynamic library characteristics m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], [m4_require([_LT_DECL_EGREP]) m4_require([_LT_DECL_OBJDUMP]) m4_require([_LT_DECL_DLLTOOL]) AC_CACHE_CHECK([how to associate runtime and link libraries], lt_cv_sharedlib_from_linklib_cmd, [lt_cv_sharedlib_from_linklib_cmd='unknown' case $host_os in cygwin* | mingw* | pw32* | cegcc*) # two different shell functions defined in ltmain.sh # decide which to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ;; *) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ;; esac ;; *) # fallback: assume linklib IS sharedlib lt_cv_sharedlib_from_linklib_cmd="$ECHO" ;; esac ]) sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO _LT_DECL([], [sharedlib_from_linklib_cmd], [1], [Command to associate shared and link libraries]) ])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB # _LT_PATH_MANIFEST_TOOL # ---------------------- # locate the manifest tool m4_defun([_LT_PATH_MANIFEST_TOOL], [AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], [lt_cv_path_mainfest_tool=no echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out cat conftest.err >&AS_MESSAGE_LOG_FD if $GREP 'Manifest Tool' conftest.out > /dev/null; then lt_cv_path_mainfest_tool=yes fi rm -f conftest*]) if test "x$lt_cv_path_mainfest_tool" != xyes; then MANIFEST_TOOL=: fi _LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl ])# _LT_PATH_MANIFEST_TOOL # LT_LIB_M # -------- # check for math library AC_DEFUN([LT_LIB_M], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, cos, LIBM="-lm") ;; esac AC_SUBST([LIBM]) ])# LT_LIB_M # Old name: AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_CHECK_LIBM], []) # _LT_COMPILER_NO_RTTI([TAGNAME]) # ------------------------------- m4_defun([_LT_COMPILER_NO_RTTI], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= if test "$GCC" = yes; then case $cc_basename in nvcc*) _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; *) _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; esac _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], lt_cv_prog_compiler_rtti_exceptions, [-fno-rtti -fno-exceptions], [], [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) fi _LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], [Compiler flag to turn off builtin functions]) ])# _LT_COMPILER_NO_RTTI # _LT_CMD_GLOBAL_SYMBOLS # ---------------------- m4_defun([_LT_CMD_GLOBAL_SYMBOLS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([LT_PATH_NM])dnl AC_REQUIRE([LT_PATH_LD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_TAG_COMPILER])dnl # Check for command to grab the raw symbol name followed by C symbol from nm. AC_MSG_CHECKING([command to parse $NM output from $compiler object]) AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [ # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[[BCDEGRST]]' # Regexp to match symbols that can be accessed directly from C. sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[[BCDT]]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[[ABCDGISTW]]' ;; hpux*) if test "$host_cpu" = ia64; then symcode='[[ABCDEGRST]]' fi ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; osf*) symcode='[[BCDEGQRST]]' ;; solaris*) symcode='[[BDRT]]' ;; sco3.2v5*) symcode='[[DT]]' ;; sysv4.2uw2*) symcode='[[DT]]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[[ABDT]]' ;; sysv4) symcode='[[DFNSTU]]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[[ABCDGIRSTW]]' ;; esac # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function # and D for any global variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK ['"\ " {last_section=section; section=\$ 3};"\ " /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ " {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ " s[1]~/^[@?]/{print s[1], s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx]" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if AC_TRY_EVAL(ac_compile); then # Now try to grab the symbols. nlist=conftest.nm if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT@&t@_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT@&t@_DLSYM_CONST #else # define LT@&t@_DLSYM_CONST const #endif #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ LT@&t@_DLSYM_CONST struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[[]] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD fi else echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done ]) if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then AC_MSG_RESULT(failed) else AC_MSG_RESULT(ok) fi # Response file support. if test "$lt_cv_nm_interface" = "MS dumpbin"; then nm_file_list_spec='@' elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then nm_file_list_spec='@' fi _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], [Take the output of nm and produce a listing of raw symbols and C names]) _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], [Transform the output of nm in a proper C declaration]) _LT_DECL([global_symbol_to_c_name_address], [lt_cv_sys_global_symbol_to_c_name_address], [1], [Transform the output of nm in a C name address pair]) _LT_DECL([global_symbol_to_c_name_address_lib_prefix], [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], [Transform the output of nm in a C name address pair when lib prefix is needed]) _LT_DECL([], [nm_file_list_spec], [1], [Specify filename containing input files for $NM]) ]) # _LT_CMD_GLOBAL_SYMBOLS # _LT_COMPILER_PIC([TAGNAME]) # --------------------------- m4_defun([_LT_COMPILER_PIC], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_wl, $1)= _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)= m4_if([$1], [CXX], [ # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. _LT_TAGVAR(lt_prog_compiler_static, $1)= ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else case $host_os in aix[[4-9]]*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; dgux*) case $cc_basename in ec++*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; ghcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; aCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # KAI C++ Compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; ecpc* ) # old Intel C++ for x86_64 which still supported -KPIC. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; icpc* ) # Intel C++, used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; pgCC* | pgcpp*) # Portland Group C++ compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL 8.0, 9.0 on PPC and BlueGene _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ;; *) ;; esac ;; netbsd* | netbsdelf*-gnu) ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; cxx*) # Digital/Compaq C++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; lcc*) # Lucid _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; *) ;; esac ;; vxworks*) ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ], [ if test "$GCC" = yes; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. _LT_TAGVAR(lt_prog_compiler_static, $1)= ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac case $cc_basename in nvcc*) # Cuda Compiler Driver 2.2 _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" fi ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; hpux9* | hpux10* | hpux11*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC (with -KPIC) is the default. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # Lahey Fortran 8.1. lf95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' ;; nagfor*) # NAG Fortran compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; ccc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All Alpha code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xl* | bgxl* | bgf* | mpixl*) # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) # Sun Fortran 8.3 passes all unrecognized flags to the linker _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='' ;; *Sun\ F* | *Sun*Fortran*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; *Intel*\ [[CF]]*Compiler*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; *Portland\ Group*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; esac ;; newsos6) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All OSF/1 code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; rdos*) _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; solaris*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' case $cc_basename in f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; *) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; esac ;; sunos4*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; unicos*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; uts4*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ]) case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" ;; esac AC_CACHE_CHECK([for $compiler option to produce PIC], [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) _LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) # # Check to make sure the PIC flag actually works. # if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in "" | " "*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; esac], [_LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) fi _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], [Additional compiler flags for building library objects]) _LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], [How to pass a linker flag through the compiler]) # # Check to make sure the static flag actually works. # wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" _LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), $lt_tmp_static_flag, [], [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) _LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], [Compiler flag to prevent dynamic linking]) ])# _LT_COMPILER_PIC # _LT_LINKER_SHLIBS([TAGNAME]) # ---------------------------- # See if the linker supports building shared libraries. m4_defun([_LT_LINKER_SHLIBS], [AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl m4_require([_LT_PATH_MANIFEST_TOOL])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) m4_if([$1], [CXX], [ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] case $host_os in aix[[4-9]]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global defined # symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ;; cygwin* | mingw* | cegcc*) case $cc_basename in cl*) _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] ;; esac ;; linux* | k*bsd*-gnu | gnu*) _LT_TAGVAR(link_all_deplibs, $1)=no ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac ], [ runpath_var= _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_cmds, $1)= _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(old_archive_from_new_cmds, $1)= _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= _LT_TAGVAR(thread_safe_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list _LT_TAGVAR(include_expsyms, $1)= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. dnl Note also adjust exclude_expsyms for C++ above. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; linux* | k*bsd*-gnu | gnu*) _LT_TAGVAR(link_all_deplibs, $1)=no ;; esac _LT_TAGVAR(ld_shlibs, $1)=yes # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility # with the native linker. However, as the warning in the GNU ld # block says, versions before 2.19.5* couldn't really create working # shared libraries, regardless of the interface used. case `$LD -v 2>&1` in *\ \(GNU\ Binutils\)\ 2.19.5*) ;; *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; *) lt_use_gnu_ld_interface=yes ;; esac ;; *) lt_use_gnu_ld_interface=yes ;; esac fi if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi supports_anon_versioning=no case `$LD -v 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[[3-9]]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.19, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to install binutils *** 2.20 or above, or modify your PATH so that a non-GNU linker is found. *** You will then need to restart the configuration process. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 _LT_TAGVAR(whole_archive_flag_spec, $1)= tmp_sharedflag='--shared' ;; xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi case $cc_basename in xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; sunos4*) _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then runpath_var= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. _LT_TAGVAR(hardcode_minus_L, $1)=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. _LT_TAGVAR(hardcode_direct, $1)=unsupported fi ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global # defined symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' if test "$GCC" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi _LT_TAGVAR(link_all_deplibs, $1)=no else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; bsdi[[45]]*) _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in cl*) # Native MSVC _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(file_list_spec, $1)='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # Assume MSVC wrapper _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' # FIXME: Should let the user specify the lib program. _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; esac ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; dgux*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2.*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; hpux9*) if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; hpux10*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes fi ;; hpux11*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) m4_if($1, [], [ # Older versions of the 11.00 compiler do not understand -b yet # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) _LT_LINKER_OPTION([if $CC understands -b], _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) ;; esac fi if test "$with_gnu_ld" = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. # This should be the same for all languages, so no per-tag cache variable. AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], [lt_cv_irix_exported_symbol], [save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" AC_LINK_IFELSE( [AC_LANG_SOURCE( [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], [C++], [[int foo (void) { return 0; }]], [Fortran 77], [[ subroutine foo end]], [Fortran], [[ subroutine foo end]])])], [lt_cv_irix_exported_symbol=yes], [lt_cv_irix_exported_symbol=no]) LDFLAGS="$save_LDFLAGS"]) if test "$lt_cv_irix_exported_symbol" = yes; then _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' fi else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes _LT_TAGVAR(link_all_deplibs, $1)=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; newsos6) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *nto* | *qnx*) ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' else case $host_os in openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ;; esac fi else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; os2*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; solaris*) _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='${wl}' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' fi ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4) case $host_vendor in sni) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' _LT_TAGVAR(hardcode_direct, $1)=no ;; motorola) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4.3*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes _LT_TAGVAR(ld_shlibs, $1)=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(ld_shlibs, $1)=no ;; esac if test x$host_vendor = xsni; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' ;; esac fi fi ]) AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld _LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl _LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl _LT_DECL([], [extract_expsyms_cmds], [2], [The commands to extract the exported symbol list from a shared archive]) # # Do we need to explicitly link libc? # case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in x|xyes) # Assume -lc should be added _LT_TAGVAR(archive_cmds_need_lc, $1)=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $_LT_TAGVAR(archive_cmds, $1) in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. AC_CACHE_CHECK([whether -lc should be explicitly linked in], [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), [$RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if AC_TRY_EVAL(ac_compile) 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) _LT_TAGVAR(allow_undefined_flag, $1)= if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) then lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no else lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes fi _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* ]) _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) ;; esac fi ;; esac _LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], [Whether or not to add -lc for building shared libraries]) _LT_TAGDECL([allow_libtool_libs_with_static_runtimes], [enable_shared_with_static_runtimes], [0], [Whether or not to disallow shared libs when runtime libs are static]) _LT_TAGDECL([], [export_dynamic_flag_spec], [1], [Compiler flag to allow reflexive dlopens]) _LT_TAGDECL([], [whole_archive_flag_spec], [1], [Compiler flag to generate shared objects directly from archives]) _LT_TAGDECL([], [compiler_needs_object], [1], [Whether the compiler copes with passing no objects directly]) _LT_TAGDECL([], [old_archive_from_new_cmds], [2], [Create an old-style archive from a shared archive]) _LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], [Create a temporary old-style archive to link instead of a shared archive]) _LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) _LT_TAGDECL([], [archive_expsym_cmds], [2]) _LT_TAGDECL([], [module_cmds], [2], [Commands used to build a loadable module if different from building a shared archive.]) _LT_TAGDECL([], [module_expsym_cmds], [2]) _LT_TAGDECL([], [with_gnu_ld], [1], [Whether we are building with GNU ld or not]) _LT_TAGDECL([], [allow_undefined_flag], [1], [Flag that allows shared libraries with undefined symbols to be built]) _LT_TAGDECL([], [no_undefined_flag], [1], [Flag that enforces no undefined symbols]) _LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], [Flag to hardcode $libdir into a binary during linking. This must work even if $libdir does not exist]) _LT_TAGDECL([], [hardcode_libdir_separator], [1], [Whether we need a single "-rpath" flag with a separated argument]) _LT_TAGDECL([], [hardcode_direct], [0], [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_direct_absolute], [0], [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the resulting binary and the resulting library dependency is "absolute", i.e impossible to change by setting ${shlibpath_var} if the library is relocated]) _LT_TAGDECL([], [hardcode_minus_L], [0], [Set to "yes" if using the -LDIR flag during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_shlibpath_var], [0], [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_automatic], [0], [Set to "yes" if building a shared library automatically hardcodes DIR into the library and all subsequent libraries and executables linked against it]) _LT_TAGDECL([], [inherit_rpath], [0], [Set to yes if linker adds runtime paths of dependent libraries to runtime path list]) _LT_TAGDECL([], [link_all_deplibs], [0], [Whether libtool must link a program against all its dependency libraries]) _LT_TAGDECL([], [always_export_symbols], [0], [Set to "yes" if exported symbols are required]) _LT_TAGDECL([], [export_symbols_cmds], [2], [The commands to list exported symbols]) _LT_TAGDECL([], [exclude_expsyms], [1], [Symbols that should not be listed in the preloaded symbols]) _LT_TAGDECL([], [include_expsyms], [1], [Symbols that must always be exported]) _LT_TAGDECL([], [prelink_cmds], [2], [Commands necessary for linking programs (against libraries) with templates]) _LT_TAGDECL([], [postlink_cmds], [2], [Commands necessary for finishing linking programs]) _LT_TAGDECL([], [file_list_spec], [1], [Specify filename containing input files]) dnl FIXME: Not yet implemented dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], dnl [Compiler flag to generate thread safe objects]) ])# _LT_LINKER_SHLIBS # _LT_LANG_C_CONFIG([TAG]) # ------------------------ # Ensure that the configuration variables for a C compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to `libtool'. m4_defun([_LT_LANG_C_CONFIG], [m4_require([_LT_DECL_EGREP])dnl lt_save_CC="$CC" AC_LANG_PUSH(C) # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' _LT_TAG_COMPILER # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) LT_SYS_DLOPEN_SELF _LT_CMD_STRIPLIB # Report which library types will actually be built AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_CONFIG($1) fi AC_LANG_POP CC="$lt_save_CC" ])# _LT_LANG_C_CONFIG # _LT_LANG_CXX_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a C++ compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to `libtool'. m4_defun([_LT_LANG_CXX_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_PATH_MANIFEST_TOOL])dnl if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then AC_PROG_CXXCPP else _lt_caught_CXX_error=yes fi AC_LANG_PUSH(C++) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the CXX compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_caught_CXX_error" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} CFLAGS=$CXXFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then # We don't want -fno-exception when compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' else _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration LT_PATH_LD # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) _LT_TAGVAR(ld_shlibs, $1)=yes case $host_os in aix3*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' if test "$GXX" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to # export. _LT_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty # executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared # libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; cygwin* | mingw* | pw32* | cegcc*) case $GXX,$cc_basename in ,cl* | no,cl*) # Native MSVC # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(file_list_spec, $1)='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ func_to_tool_file "$lt_outputfile"~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # g++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; freebsd2.*) # C++ shared libraries reported to be fairly broken before # switch to ELF _LT_TAGVAR(ld_shlibs, $1)=no ;; freebsd-elf*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions _LT_TAGVAR(ld_shlibs, $1)=yes ;; haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; hpux9*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) ;; *) _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' fi fi _LT_TAGVAR(link_all_deplibs, $1)=yes ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc* | ecpc* ) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; esac _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ $RANLIB $oldlib' _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; *) # Version 6 and above use weak symbols _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' ;; xl* | mpixl* | bgxl*) # IBM XL 8.0 on PPC, with GNU ld _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; m88k*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; *nto* | *qnx*) _LT_TAGVAR(ld_shlibs, $1)=yes ;; openbsd2*) # C++ shared libraries are fairly broken _LT_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi output_verbose_link_cmd=func_echo_all else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # the KAI C++ compiler. case $host in osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; esac ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; cxx*) case $host in osf3*) _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ;; *) _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ $RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ;; esac _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' case $host in osf3*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ '"$_LT_TAGVAR(old_archive_cmds, $1)" _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ '"$_LT_TAGVAR(reload_cmds, $1)" ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_TAGVAR(GCC, $1)="$GXX" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld fi # test "$_lt_caught_CXX_error" != yes AC_LANG_POP ])# _LT_LANG_CXX_CONFIG # _LT_FUNC_STRIPNAME_CNF # ---------------------- # func_stripname_cnf prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # # This function is identical to the (non-XSI) version of func_stripname, # except this one can be used by m4 code that may be executed by configure, # rather than the libtool script. m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl AC_REQUIRE([_LT_DECL_SED]) AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) func_stripname_cnf () { case ${2} in .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; esac } # func_stripname_cnf ])# _LT_FUNC_STRIPNAME_CNF # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) # --------------------------------- # Figure out "hidden" library dependencies from verbose # compiler output when linking a shared library. # Parse the compiler output and extract the necessary # objects, libraries and library flags. m4_defun([_LT_SYS_HIDDEN_LIBDEPS], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl # Dependencies to place before and after the object being linked: _LT_TAGVAR(predep_objects, $1)= _LT_TAGVAR(postdep_objects, $1)= _LT_TAGVAR(predeps, $1)= _LT_TAGVAR(postdeps, $1)= _LT_TAGVAR(compiler_lib_search_path, $1)= dnl we can't use the lt_simple_compile_test_code here, dnl because it contains code intended for an executable, dnl not a library. It's possible we should let each dnl tag define a new lt_????_link_test_code variable, dnl but it's only used here... m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF int a; void foo (void) { a = 0; } _LT_EOF ], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF class Foo { public: Foo (void) { a = 0; } private: int a; }; _LT_EOF ], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer*4 a a=0 return end _LT_EOF ], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer a a=0 return end _LT_EOF ], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF public class foo { private int a; public void bar (void) { a = 0; } }; _LT_EOF ], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF package foo func foo() { } _LT_EOF ]) _lt_libdeps_save_CFLAGS=$CFLAGS case "$CC $CFLAGS " in #( *\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; *\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; *\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; esac dnl Parse the compiler output and extract the necessary dnl objects, libraries and library flags. if AC_TRY_EVAL(ac_compile); then # Parse the compiler output and extract the necessary # objects, libraries and library flags. # Sentinel used to keep track of whether or not we are before # the conftest object file. pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do case ${prev}${p} in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. if test $p = "-L" || test $p = "-R"; then prev=$p continue fi # Expand the sysroot to ease extracting the directories later. if test -z "$prev"; then case $p in -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; esac fi case $p in =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; esac if test "$pre_test_object_deps_done" = no; then case ${prev} in -L | -R) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" else _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" fi ;; # The "-l" case would never come before the object being # linked, so don't bother handling this case. esac else if test -z "$_LT_TAGVAR(postdeps, $1)"; then _LT_TAGVAR(postdeps, $1)="${prev}${p}" else _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" fi fi prev= ;; *.lto.$objext) ;; # Ignore GCC LTO objects *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then pre_test_object_deps_done=yes continue fi if test "$pre_test_object_deps_done" = no; then if test -z "$_LT_TAGVAR(predep_objects, $1)"; then _LT_TAGVAR(predep_objects, $1)="$p" else _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" fi else if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then _LT_TAGVAR(postdep_objects, $1)="$p" else _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" fi fi ;; *) ;; # Ignore the rest. esac done # Clean up. rm -f a.out a.exe else echo "libtool.m4: error: problem compiling $1 test program" fi $RM -f confest.$objext CFLAGS=$_lt_libdeps_save_CFLAGS # PORTME: override above test on systems where it is broken m4_if([$1], [CXX], [case $host_os in interix[[3-9]]*) # Interix 3.5 installs completely hosed .la files for C++, so rather than # hack all around it, let's just trust "g++" to DTRT. _LT_TAGVAR(predep_objects,$1)= _LT_TAGVAR(postdep_objects,$1)= _LT_TAGVAR(postdeps,$1)= ;; linux*) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac if test "$solaris_use_stlport4" != yes; then _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac # Adding this requires a known-good setup of shared libraries for # Sun compiler versions before 5.6, else PIC objects from an old # archive will be linked into the output, leading to subtle bugs. if test "$solaris_use_stlport4" != yes; then _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; esac ]) case " $_LT_TAGVAR(postdeps, $1) " in *" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; esac _LT_TAGVAR(compiler_lib_search_dirs, $1)= if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` fi _LT_TAGDECL([], [compiler_lib_search_dirs], [1], [The directories searched by this compiler when creating a shared library]) _LT_TAGDECL([], [predep_objects], [1], [Dependencies to place before and after the objects being linked to create a shared library]) _LT_TAGDECL([], [postdep_objects], [1]) _LT_TAGDECL([], [predeps], [1]) _LT_TAGDECL([], [postdeps], [1]) _LT_TAGDECL([], [compiler_lib_search_path], [1], [The library search path used internally by the compiler when linking a shared library]) ])# _LT_SYS_HIDDEN_LIBDEPS # _LT_LANG_F77_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a Fortran 77 compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_F77_CONFIG], [AC_LANG_PUSH(Fortran 77) if test -z "$F77" || test "X$F77" = "Xno"; then _lt_disable_F77=yes fi _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for f77 test sources. ac_ext=f # Object file extension for compiled f77 test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the F77 compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_disable_F77" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${F77-"f77"} CFLAGS=$FFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) GCC=$G77 if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)="$G77" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC="$lt_save_CC" CFLAGS="$lt_save_CFLAGS" fi # test "$_lt_disable_F77" != yes AC_LANG_POP ])# _LT_LANG_F77_CONFIG # _LT_LANG_FC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for a Fortran compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_FC_CONFIG], [AC_LANG_PUSH(Fortran) if test -z "$FC" || test "X$FC" = "Xno"; then _lt_disable_FC=yes fi _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for fc test sources. ac_ext=${ac_fc_srcext-f} # Object file extension for compiled fc test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the FC compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_disable_FC" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${FC-"f95"} CFLAGS=$FCFLAGS compiler=$CC GCC=$ac_cv_fc_compiler_gnu _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS fi # test "$_lt_disable_FC" != yes AC_LANG_POP ])# _LT_LANG_FC_CONFIG # _LT_LANG_GCJ_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for the GNU Java Compiler compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_GCJ_CONFIG], [AC_REQUIRE([LT_PROG_GCJ])dnl AC_LANG_SAVE # Source file extension for Java test sources. ac_ext=java # Object file extension for compiled Java test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="class foo {}" # Code to be used in simple link tests lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC=yes CC=${GCJ-"gcj"} CFLAGS=$GCJFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_TAGVAR(LD, $1)="$LD" _LT_CC_BASENAME([$compiler]) # GCJ did not exist at the time GCC didn't implicitly link libc in. _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi AC_LANG_RESTORE GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_GCJ_CONFIG # _LT_LANG_GO_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for the GNU Go compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_GO_CONFIG], [AC_REQUIRE([LT_PROG_GO])dnl AC_LANG_SAVE # Source file extension for Go test sources. ac_ext=go # Object file extension for compiled Go test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="package main; func main() { }" # Code to be used in simple link tests lt_simple_link_test_code='package main; func main() { }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC=yes CC=${GOC-"gccgo"} CFLAGS=$GOFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_TAGVAR(LD, $1)="$LD" _LT_CC_BASENAME([$compiler]) # Go did not exist at the time GCC didn't implicitly link libc in. _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi AC_LANG_RESTORE GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_GO_CONFIG # _LT_LANG_RC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for the Windows resource compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_RC_CONFIG], [AC_REQUIRE([LT_PROG_RC])dnl AC_LANG_SAVE # Source file extension for RC test sources. ac_ext=rc # Object file extension for compiled RC test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' # Code to be used in simple link tests lt_simple_link_test_code="$lt_simple_compile_test_code" # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC= CC=${RC-"windres"} CFLAGS= compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes if test -n "$compiler"; then : _LT_CONFIG($1) fi GCC=$lt_save_GCC AC_LANG_RESTORE CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_RC_CONFIG # LT_PROG_GCJ # ----------- AC_DEFUN([LT_PROG_GCJ], [m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj,) test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS)])])[]dnl ]) # Old name: AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_GCJ], []) # LT_PROG_GO # ---------- AC_DEFUN([LT_PROG_GO], [AC_CHECK_TOOL(GOC, gccgo,) ]) # LT_PROG_RC # ---------- AC_DEFUN([LT_PROG_RC], [AC_CHECK_TOOL(RC, windres,) ]) # Old name: AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_RC], []) # _LT_DECL_EGREP # -------------- # If we don't have a new enough Autoconf to choose the best grep # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_EGREP], [AC_REQUIRE([AC_PROG_EGREP])dnl AC_REQUIRE([AC_PROG_FGREP])dnl test -z "$GREP" && GREP=grep _LT_DECL([], [GREP], [1], [A grep program that handles long lines]) _LT_DECL([], [EGREP], [1], [An ERE matcher]) _LT_DECL([], [FGREP], [1], [A literal string matcher]) dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too AC_SUBST([GREP]) ]) # _LT_DECL_OBJDUMP # -------------- # If we don't have a new enough Autoconf to choose the best objdump # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_OBJDUMP], [AC_CHECK_TOOL(OBJDUMP, objdump, false) test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) AC_SUBST([OBJDUMP]) ]) # _LT_DECL_DLLTOOL # ---------------- # Ensure DLLTOOL variable is set. m4_defun([_LT_DECL_DLLTOOL], [AC_CHECK_TOOL(DLLTOOL, dlltool, false) test -z "$DLLTOOL" && DLLTOOL=dlltool _LT_DECL([], [DLLTOOL], [1], [DLL creation program]) AC_SUBST([DLLTOOL]) ]) # _LT_DECL_SED # ------------ # Check for a fully-functional sed program, that truncates # as few characters as possible. Prefer GNU sed if found. m4_defun([_LT_DECL_SED], [AC_PROG_SED test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" _LT_DECL([], [SED], [1], [A sed program that does not truncate output]) _LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], [Sed that helps us avoid accidentally triggering echo(1) options like -n]) ])# _LT_DECL_SED m4_ifndef([AC_PROG_SED], [ ############################################################ # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_SED. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # ############################################################ m4_defun([AC_PROG_SED], [AC_MSG_CHECKING([for a sed that does not truncate output]) AC_CACHE_VAL(lt_cv_path_SED, [# Loop through the user's path and test for sed and gsed. # Then use that list of sed's as ones to test for truncation. as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for lt_ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" fi done done done IFS=$as_save_IFS lt_ac_max=0 lt_ac_count=0 # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do test ! -f $lt_ac_sed && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in # Check for GNU sed and select it if it is found. if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then lt_cv_path_SED=$lt_ac_sed break fi while true; do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo >>conftest.nl $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break cmp -s conftest.out conftest.nl || break # 10000 chars as input seems more than enough test $lt_ac_count -gt 10 && break lt_ac_count=`expr $lt_ac_count + 1` if test $lt_ac_count -gt $lt_ac_max; then lt_ac_max=$lt_ac_count lt_cv_path_SED=$lt_ac_sed fi done done ]) SED=$lt_cv_path_SED AC_SUBST([SED]) AC_MSG_RESULT([$SED]) ])#AC_PROG_SED ])#m4_ifndef # Old name: AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_SED], []) # _LT_CHECK_SHELL_FEATURES # ------------------------ # Find out whether the shell is Bourne or XSI compatible, # or has some other useful features. m4_defun([_LT_CHECK_SHELL_FEATURES], [AC_MSG_CHECKING([whether the shell understands some XSI constructs]) # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ = c,a/b,b/c, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes AC_MSG_RESULT([$xsi_shell]) _LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) AC_MSG_CHECKING([whether the shell understands "+="]) lt_shell_append=no ( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes AC_MSG_RESULT([$lt_shell_append]) _LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi _LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac _LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl _LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl ])# _LT_CHECK_SHELL_FEATURES # _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) # ------------------------------------------------------ # In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and # '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. m4_defun([_LT_PROG_FUNCTION_REPLACE], [dnl { sed -e '/^$1 ()$/,/^} # $1 /c\ $1 ()\ {\ m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) } # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: ]) # _LT_PROG_REPLACE_SHELLFNS # ------------------------- # Replace existing portable implementations of several shell functions with # equivalent extended shell implementations where those features are available.. m4_defun([_LT_PROG_REPLACE_SHELLFNS], [if test x"$xsi_shell" = xyes; then _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac]) _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl func_basename_result="${1##*/}"]) _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac func_basename_result="${1##*/}"]) _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are # positional parameters, so assign one to ordinary parameter first. func_stripname_result=${3} func_stripname_result=${func_stripname_result#"${1}"} func_stripname_result=${func_stripname_result%"${2}"}]) _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl func_split_long_opt_name=${1%%=*} func_split_long_opt_arg=${1#*=}]) _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl func_split_short_opt_arg=${1#??} func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl case ${1} in *.lo) func_lo2o_result=${1%.lo}.${objext} ;; *) func_lo2o_result=${1} ;; esac]) _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) fi if test x"$lt_shell_append" = xyes; then _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl func_quote_for_eval "${2}" dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) # Save a `func_append' function call where possible by direct use of '+=' sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: else # Save a `func_append' function call even when '+=' is not available sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$_lt_function_replace_fail" = x":"; then AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) fi ]) # _LT_PATH_CONVERSION_FUNCTIONS # ----------------------------- # Determine which file name conversion functions should be used by # func_to_host_file (and, implicitly, by func_to_host_path). These are needed # for certain cross-compile configurations and native mingw. m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_MSG_CHECKING([how to convert $build file names to $host format]) AC_CACHE_VAL(lt_cv_to_host_file_cmd, [case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ;; esac ;; *-*-cygwin* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_noop ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ;; esac ;; * ) # unhandled hosts (and "normal" native builds) lt_cv_to_host_file_cmd=func_convert_file_noop ;; esac ]) to_host_file_cmd=$lt_cv_to_host_file_cmd AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) _LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], [0], [convert $build file names to $host format])dnl AC_MSG_CHECKING([how to convert $build file names to toolchain format]) AC_CACHE_VAL(lt_cv_to_tool_file_cmd, [#assume ordinary cross tools, or native build. lt_cv_to_tool_file_cmd=func_convert_file_noop case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ;; esac ;; esac ]) to_tool_file_cmd=$lt_cv_to_tool_file_cmd AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) _LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], [0], [convert $build files to toolchain format])dnl ])# _LT_PATH_CONVERSION_FUNCTIONS parlatype-1.5.4/m4/lt~obsolete.m40000644000175000017500000001375613167645077013633 00000000000000# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- # # Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004. # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 5 lt~obsolete.m4 # These exist entirely to fool aclocal when bootstrapping libtool. # # In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) # which have later been changed to m4_define as they aren't part of the # exported API, or moved to Autoconf or Automake where they belong. # # The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN # in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us # using a macro with the same name in our local m4/libtool.m4 it'll # pull the old libtool.m4 in (it doesn't see our shiny new m4_define # and doesn't know about Autoconf macros at all.) # # So we provide this file, which has a silly filename so it's always # included after everything else. This provides aclocal with the # AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything # because those macros already exist, or will be overwritten later. # We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. # # Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. # Yes, that means every name once taken will need to remain here until # we give up compatibility with versions before 1.7, at which point # we need to keep only those names which we still refer to. # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) parlatype-1.5.4/m4/gtk-doc.m40000644000175000017500000000631213167645026012571 00000000000000dnl -*- mode: autoconf -*- # serial 2 dnl Usage: dnl GTK_DOC_CHECK([minimum-gtk-doc-version]) AC_DEFUN([GTK_DOC_CHECK], [ AC_REQUIRE([PKG_PROG_PKG_CONFIG]) AC_BEFORE([AC_PROG_LIBTOOL],[$0])dnl setup libtool first AC_BEFORE([AM_PROG_LIBTOOL],[$0])dnl setup libtool first ifelse([$1],[],[gtk_doc_requires="gtk-doc"],[gtk_doc_requires="gtk-doc >= $1"]) AC_MSG_CHECKING([for gtk-doc]) PKG_CHECK_EXISTS([$gtk_doc_requires],[have_gtk_doc=yes],[have_gtk_doc=no]) AC_MSG_RESULT($have_gtk_doc) if test "$have_gtk_doc" = "no"; then AC_MSG_WARN([ You will not be able to create source packages with 'make dist' because $gtk_doc_requires is not found.]) fi dnl check for tools we added during development dnl Use AC_CHECK_PROG to avoid the check target using an absolute path that dnl may not be writable by the user. Currently, automake requires that the dnl test name must end in '.test'. dnl https://bugzilla.gnome.org/show_bug.cgi?id=701638 AC_CHECK_PROG([GTKDOC_CHECK],[gtkdoc-check],[gtkdoc-check.test]) AC_PATH_PROG([GTKDOC_CHECK_PATH],[gtkdoc-check]) AC_PATH_PROGS([GTKDOC_REBASE],[gtkdoc-rebase],[true]) AC_PATH_PROG([GTKDOC_MKPDF],[gtkdoc-mkpdf]) dnl for overriding the documentation installation directory AC_ARG_WITH([html-dir], AS_HELP_STRING([--with-html-dir=PATH], [path to installed docs]),, [with_html_dir='${datadir}/gtk-doc/html']) HTML_DIR="$with_html_dir" AC_SUBST([HTML_DIR]) dnl enable/disable documentation building AC_ARG_ENABLE([gtk-doc], AS_HELP_STRING([--enable-gtk-doc], [use gtk-doc to build documentation [[default=no]]]),, [enable_gtk_doc=no]) AC_MSG_CHECKING([whether to build gtk-doc documentation]) AC_MSG_RESULT($enable_gtk_doc) if test "x$enable_gtk_doc" = "xyes" && test "$have_gtk_doc" = "no"; then AC_MSG_ERROR([ You must have $gtk_doc_requires installed to build documentation for $PACKAGE_NAME. Please install gtk-doc or disable building the documentation by adding '--disable-gtk-doc' to '[$]0'.]) fi dnl don't check for glib if we build glib if test "x$PACKAGE_NAME" != "xglib"; then dnl don't fail if someone does not have glib PKG_CHECK_MODULES(GTKDOC_DEPS, glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0,,[:]) fi dnl enable/disable output formats AC_ARG_ENABLE([gtk-doc-html], AS_HELP_STRING([--enable-gtk-doc-html], [build documentation in html format [[default=yes]]]),, [enable_gtk_doc_html=yes]) AC_ARG_ENABLE([gtk-doc-pdf], AS_HELP_STRING([--enable-gtk-doc-pdf], [build documentation in pdf format [[default=no]]]),, [enable_gtk_doc_pdf=no]) if test -z "$GTKDOC_MKPDF"; then enable_gtk_doc_pdf=no fi if test -z "$AM_DEFAULT_VERBOSITY"; then AM_DEFAULT_VERBOSITY=1 fi AC_SUBST([AM_DEFAULT_VERBOSITY]) AM_CONDITIONAL([HAVE_GTK_DOC], [test x$have_gtk_doc = xyes]) AM_CONDITIONAL([ENABLE_GTK_DOC], [test x$enable_gtk_doc = xyes]) AM_CONDITIONAL([GTK_DOC_BUILD_HTML], [test x$enable_gtk_doc_html = xyes]) AM_CONDITIONAL([GTK_DOC_BUILD_PDF], [test x$enable_gtk_doc_pdf = xyes]) AM_CONDITIONAL([GTK_DOC_USE_LIBTOOL], [test -n "$LIBTOOL"]) AM_CONDITIONAL([GTK_DOC_USE_REBASE], [test -n "$GTKDOC_REBASE"]) ]) parlatype-1.5.4/Makefile.am0000644000175000017500000000450413176574164012520 00000000000000SUBDIRS = libparlatype data docs help libreoffice po src ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS} EXTRA_DIST = \ config.rpath \ COPYING_CCBYSA \ README.md CLEANFILES = \ libparlatype/docs/reference/*.bak DISTCLEANFILES = \ `find . -mindepth 1 -iname "*~"` # Distcheck flags for libparlatype: # without glade catalog, because glade catalog is installed into a detected dir # that we have no permissions for. DISTCHECK_CONFIGURE_FLAGS = \ --enable-introspection \ --enable-gtk-doc \ --disable-glade-catalog # A few maintainer make targets .PHONY: dist-sign compat-check help help-online pot todo lp-export lp-create-tar LP_EXPORT_DIR = tmp LP_EXPORT_FILE = launchpad-upload.tar.gz # make compat-check -- list all GTK/Glib/GStreamer version checks compat-check: @find . \( -name "*.c" -o -name "*.h" \) -exec grep -Hno "\(GLIB\|GTK\|GST\)_CHECK_VERSION.*" {} \; # make dist-sign -- sign tarball dist-sign: gpg --armor --detach-sign "parlatype-$(VERSION).tar.gz" # make help-online -- create html version of help help-online: mkdir -p help-online yelp-build html -o help-online/ help/C/ # make lp-export -- create archive to export translations to launchpad lp-export: $(LP_EXPORT_FILE) $(LP_EXPORT_FILE): pot lp-create-tar lp-create-tar: mkdir $(LP_EXPORT_DIR) mkdir $(LP_EXPORT_DIR)/libparlatype mkdir $(LP_EXPORT_DIR)/parlatype mkdir $(LP_EXPORT_DIR)/help cp libparlatype/po/*.pot $(LP_EXPORT_DIR)/libparlatype cp libparlatype/po/*.po $(LP_EXPORT_DIR)/libparlatype cp po/*.pot $(LP_EXPORT_DIR)/parlatype cp po/*.po $(LP_EXPORT_DIR)/parlatype cp help/*.pot $(LP_EXPORT_DIR)/help/help.pot find help/ -iname "*.po" -exec cp {} $(LP_EXPORT_DIR)/help \; tar -C $(LP_EXPORT_DIR) -czf $(LP_EXPORT_FILE) libparlatype parlatype help rm -r $(LP_EXPORT_DIR)/ # make pot -- create all translation templates at once pot: $(MAKE) -C po parlatype.pot $(MAKE) -C help pot $(MAKE) -C libparlatype/po libparlatype.pot # make todo -- list all FIXME and TODO items todo: @find . \( -name "*.c" -o -name "*.h" \) -exec grep -Hno "FIXME .*" {} \; | sed "s/\*\///" @find . \( -name "*.c" -o -name "*.h" \) -exec grep -Hno "TODO .*" {} \; | sed "s/\*\///" # make help -- show this list help: @grep -e "^# make .*" Makefile | cut -c3- maintainer-clean-local: rm -rf $(LP_EXPORT_DIR) rm -f $(LP_EXPORT_FILE)