certbot-apache-0.39.0/ 0002755 0001750 0001750 00000000000 13544726642 014673 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/setup.cfg 0000644 0001750 0001750 00000000103 13544726642 016504 0 ustar erica erica 0000000 0000000 [bdist_wheel]
universal = 1
[egg_info]
tag_build =
tag_date = 0
certbot-apache-0.39.0/LICENSE.txt 0000644 0001750 0001750 00000025042 13544726630 016514 0 ustar erica erica 0000000 0000000 Copyright 2015 Electronic Frontier Foundation and others
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
"License" shall mean the terms and conditions for use, reproduction,
and distribution as defined by Sections 1 through 9 of this document.
"Licensor" shall mean the copyright owner or entity authorized by
the copyright owner that is granting the License.
"Legal Entity" shall mean the union of the acting entity and all
other entities that control, are controlled by, or are under common
control with that entity. For the purposes of this definition,
"control" means (i) the power, direct or indirect, to cause the
direction or management of such entity, whether by contract or
otherwise, or (ii) ownership of fifty percent (50%) or more of the
outstanding shares, or (iii) beneficial ownership of such entity.
"You" (or "Your") shall mean an individual or Legal Entity
exercising permissions granted by this License.
"Source" form shall mean the preferred form for making modifications,
including but not limited to software source code, documentation
source, and configuration files.
"Object" form shall mean any form resulting from mechanical
transformation or translation of a Source form, including but
not limited to compiled object code, generated documentation,
and conversions to other media types.
"Work" shall mean the work of authorship, whether in Source or
Object form, made available under the License, as indicated by a
copyright notice that is included in or attached to the work
(an example is provided in the Appendix below).
"Derivative Works" shall mean any work, whether in Source or Object
form, that is based on (or derived from) the Work and for which the
editorial revisions, annotations, elaborations, or other modifications
represent, as a whole, an original work of authorship. For the purposes
of this License, Derivative Works shall not include works that remain
separable from, or merely link (or bind by name) to the interfaces of,
the Work and Derivative Works thereof.
"Contribution" shall mean any work of authorship, including
the original version of the Work and any modifications or additions
to that Work or Derivative Works thereof, that is intentionally
submitted to Licensor for inclusion in the Work by the copyright owner
or by an individual or Legal Entity authorized to submit on behalf of
the copyright owner. For the purposes of this definition, "submitted"
means any form of electronic, verbal, or written communication sent
to the Licensor or its representatives, including but not limited to
communication on electronic mailing lists, source code control systems,
and issue tracking systems that are managed by, or on behalf of, the
Licensor for the purpose of discussing and improving the Work, but
excluding communication that is conspicuously marked or otherwise
designated in writing by the copyright owner as "Not a Contribution."
"Contributor" shall mean Licensor and any individual or Legal Entity
on behalf of whom a Contribution has been received by Licensor and
subsequently incorporated within the Work.
2. Grant of Copyright License. Subject to the terms and conditions of
this License, each Contributor hereby grants to You a perpetual,
worldwide, non-exclusive, no-charge, royalty-free, irrevocable
copyright license to reproduce, prepare Derivative Works of,
publicly display, publicly perform, sublicense, and distribute the
Work and such Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of
this License, each Contributor hereby grants to You a perpetual,
worldwide, non-exclusive, no-charge, royalty-free, irrevocable
(except as stated in this section) patent license to make, have made,
use, offer to sell, sell, import, and otherwise transfer the Work,
where such license applies only to those patent claims licensable
by such Contributor that are necessarily infringed by their
Contribution(s) alone or by combination of their Contribution(s)
with the Work to which such Contribution(s) was submitted. If You
institute patent litigation against any entity (including a
cross-claim or counterclaim in a lawsuit) alleging that the Work
or a Contribution incorporated within the Work constitutes direct
or contributory patent infringement, then any patent licenses
granted to You under this License for that Work shall terminate
as of the date such litigation is filed.
4. Redistribution. You may reproduce and distribute copies of the
Work or Derivative Works thereof in any medium, with or without
modifications, and in Source or Object form, provided that You
meet the following conditions:
(a) You must give any other recipients of the Work or
Derivative Works a copy of this License; and
(b) You must cause any modified files to carry prominent notices
stating that You changed the files; and
(c) You must retain, in the Source form of any Derivative Works
that You distribute, all copyright, patent, trademark, and
attribution notices from the Source form of the Work,
excluding those notices that do not pertain to any part of
the Derivative Works; and
(d) If the Work includes a "NOTICE" text file as part of its
distribution, then any Derivative Works that You distribute must
include a readable copy of the attribution notices contained
within such NOTICE file, excluding those notices that do not
pertain to any part of the Derivative Works, in at least one
of the following places: within a NOTICE text file distributed
as part of the Derivative Works; within the Source form or
documentation, if provided along with the Derivative Works; or,
within a display generated by the Derivative Works, if and
wherever such third-party notices normally appear. The contents
of the NOTICE file are for informational purposes only and
do not modify the License. You may add Your own attribution
notices within Derivative Works that You distribute, alongside
or as an addendum to the NOTICE text from the Work, provided
that such additional attribution notices cannot be construed
as modifying the License.
You may add Your own copyright statement to Your modifications and
may provide additional or different license terms and conditions
for use, reproduction, or distribution of Your modifications, or
for any such Derivative Works as a whole, provided Your use,
reproduction, and distribution of the Work otherwise complies with
the conditions stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise,
any Contribution intentionally submitted for inclusion in the Work
by You to the Licensor shall be under the terms and conditions of
this License, without any additional terms or conditions.
Notwithstanding the above, nothing herein shall supersede or modify
the terms of any separate license agreement you may have executed
with Licensor regarding such Contributions.
6. Trademarks. This License does not grant permission to use the trade
names, trademarks, service marks, or product names of the Licensor,
except as required for reasonable and customary use in describing the
origin of the Work and reproducing the content of the NOTICE file.
7. Disclaimer of Warranty. Unless required by applicable law or
agreed to in writing, Licensor provides the Work (and each
Contributor provides its Contributions) on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
implied, including, without limitation, any warranties or conditions
of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
PARTICULAR PURPOSE. You are solely responsible for determining the
appropriateness of using or redistributing the Work and assume any
risks associated with Your exercise of permissions under this License.
8. Limitation of Liability. In no event and under no legal theory,
whether in tort (including negligence), contract, or otherwise,
unless required by applicable law (such as deliberate and grossly
negligent acts) or agreed to in writing, shall any Contributor be
liable to You for damages, including any direct, indirect, special,
incidental, or consequential damages of any character arising as a
result of this License or out of the use or inability to use the
Work (including but not limited to damages for loss of goodwill,
work stoppage, computer failure or malfunction, or any and all
other commercial damages or losses), even if such Contributor
has been advised of the possibility of such damages.
9. Accepting Warranty or Additional Liability. While redistributing
the Work or Derivative Works thereof, You may choose to offer,
and charge a fee for, acceptance of support, warranty, indemnity,
or other liability obligations and/or rights consistent with this
License. However, in accepting such obligations, You may act only
on Your own behalf and on Your sole responsibility, not on behalf
of any other Contributor, and only if You agree to indemnify,
defend, and hold each Contributor harmless for any liability
incurred by, or claims asserted against, such Contributor by reason
of your accepting any such warranty or additional liability.
END OF TERMS AND CONDITIONS
certbot-apache-0.39.0/README.rst 0000644 0001750 0001750 00000000032 13544726630 016350 0 ustar erica erica 0000000 0000000 Apache plugin for Certbot
certbot-apache-0.39.0/PKG-INFO 0000644 0001750 0001750 00000002430 13544726642 015765 0 ustar erica erica 0000000 0000000 Metadata-Version: 2.1
Name: certbot-apache
Version: 0.39.0
Summary: Apache plugin for Certbot
Home-page: https://github.com/letsencrypt/letsencrypt
Author: Certbot Project
Author-email: client-dev@letsencrypt.org
License: Apache License 2.0
Description: UNKNOWN
Platform: UNKNOWN
Classifier: Development Status :: 5 - Production/Stable
Classifier: Environment :: Plugins
Classifier: Intended Audience :: System Administrators
Classifier: License :: OSI Approved :: Apache Software License
Classifier: Operating System :: POSIX :: Linux
Classifier: Programming Language :: Python
Classifier: Programming Language :: Python :: 2
Classifier: Programming Language :: Python :: 2.7
Classifier: Programming Language :: Python :: 3
Classifier: Programming Language :: Python :: 3.4
Classifier: Programming Language :: Python :: 3.5
Classifier: Programming Language :: Python :: 3.6
Classifier: Programming Language :: Python :: 3.7
Classifier: Programming Language :: Python :: 3.8
Classifier: Topic :: Internet :: WWW/HTTP
Classifier: Topic :: Security
Classifier: Topic :: System :: Installation/Setup
Classifier: Topic :: System :: Networking
Classifier: Topic :: System :: Systems Administration
Classifier: Topic :: Utilities
Requires-Python: >=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*
Provides-Extra: docs
certbot-apache-0.39.0/MANIFEST.in 0000644 0001750 0001750 00000000412 13544726630 016421 0 ustar erica erica 0000000 0000000 include LICENSE.txt
include README.rst
recursive-include docs *
recursive-include certbot_apache/tests/testdata *
include certbot_apache/centos-options-ssl-apache.conf
include certbot_apache/options-ssl-apache.conf
recursive-include certbot_apache/augeas_lens *.aug
certbot-apache-0.39.0/certbot_apache/ 0002755 0001750 0001750 00000000000 13544726642 017636 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/override_darwin.py 0000644 0001750 0001750 00000001726 13544726630 023374 0 ustar erica erica 0000000 0000000 """ Distribution specific override class for macOS """
import pkg_resources
import zope.interface
from certbot import interfaces
from certbot_apache import configurator
@zope.interface.provider(interfaces.IPluginFactory)
class DarwinConfigurator(configurator.ApacheConfigurator):
"""macOS specific ApacheConfigurator override class"""
OS_DEFAULTS = dict(
server_root="/etc/apache2",
vhost_root="/etc/apache2/other",
vhost_files="*.conf",
logs_root="/var/log/apache2",
ctl="apachectl",
version_cmd=['apachectl', '-v'],
restart_cmd=['apachectl', 'graceful'],
conftest_cmd=['apachectl', 'configtest'],
enmod=None,
dismod=None,
le_vhost_ext="-le-ssl.conf",
handle_modules=False,
handle_sites=False,
challenge_location="/etc/apache2/other",
MOD_SSL_CONF_SRC=pkg_resources.resource_filename(
"certbot_apache", "options-ssl-apache.conf")
)
certbot-apache-0.39.0/certbot_apache/centos-options-ssl-apache.conf 0000644 0001750 0001750 00000003067 13544726630 025510 0 ustar erica erica 0000000 0000000 # This file contains important security parameters. If you modify this file
# manually, Certbot will be unable to automatically provide future security
# updates. Instead, Certbot will print and log an error message with a path to
# the up-to-date file that you will need to refer to when manually updating
# this file.
SSLEngine on
# Intermediate configuration, tweak to your needs
SSLProtocol all -SSLv2 -SSLv3
SSLCipherSuite ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
SSLHonorCipherOrder on
SSLOptions +StrictRequire
# Add vhost name to log entries:
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-agent}i\"" vhost_combined
LogFormat "%v %h %l %u %t \"%r\" %>s %b" vhost_common
#CustomLog /var/log/apache2/access.log vhost_combined
#LogLevel warn
#ErrorLog /var/log/apache2/error.log
# Always ensure Cookies have "Secure" set (JAH 2012/1)
#Header edit Set-Cookie (?i)^(.*)(;\s*secure)??((\s*;)?(.*)) "$1; Secure$3$4"
certbot-apache-0.39.0/certbot_apache/configurator.py 0000644 0001750 0001750 00000305545 13544726630 022721 0 ustar erica erica 0000000 0000000 """Apache Configurator."""
# pylint: disable=too-many-lines
import copy
import fnmatch
import logging
import re
import socket
import time
from collections import defaultdict
import pkg_resources
import six
import zope.component
import zope.interface
from acme import challenges
from acme.magic_typing import DefaultDict, Dict, List, Set, Union # pylint: disable=unused-import, no-name-in-module
from certbot import errors
from certbot import interfaces
from certbot import util
from certbot.achallenges import KeyAuthorizationAnnotatedChallenge # pylint: disable=unused-import
from certbot.compat import filesystem
from certbot.compat import os
from certbot.plugins import common
from certbot.plugins.util import path_surgery
from certbot.plugins.enhancements import AutoHSTSEnhancement
from certbot_apache import apache_util
from certbot_apache import constants
from certbot_apache import display_ops
from certbot_apache import http_01
from certbot_apache import obj
from certbot_apache import parser
logger = logging.getLogger(__name__)
# TODO: Augeas sections ie. , beginning and closing
# tags need to be the same case, otherwise Augeas doesn't recognize them.
# This is not able to be completely remedied by regular expressions because
# Augeas views as an error. This will just
# require another check_parsing_errors() after all files are included...
# (after a find_directive search is executed currently). It can be a one
# time check however because all of LE's transactions will ensure
# only properly formed sections are added.
# Note: This protocol works for filenames with spaces in it, the sites are
# properly set up and directives are changed appropriately, but Apache won't
# recognize names in sites-enabled that have spaces. These are not added to the
# Apache configuration. It may be wise to warn the user if they are trying
# to use vhost filenames that contain spaces and offer to change ' ' to '_'
# Note: FILEPATHS and changes to files are transactional. They are copied
# over before the updates are made to the existing files. NEW_FILES is
# transactional due to the use of register_file_creation()
# TODO: Verify permissions on configuration root... it is easier than
# checking permissions on each of the relative directories and less error
# prone.
# TODO: Write a server protocol finder. Listen or
# Protocol . This can verify partial setups are correct
# TODO: Add directives to sites-enabled... not sites-available.
# sites-available doesn't allow immediate find_dir search even with save()
# and load()
@zope.interface.implementer(interfaces.IAuthenticator, interfaces.IInstaller)
@zope.interface.provider(interfaces.IPluginFactory)
class ApacheConfigurator(common.Installer):
# pylint: disable=too-many-instance-attributes,too-many-public-methods
"""Apache configurator.
:ivar config: Configuration.
:type config: :class:`~certbot.interfaces.IConfig`
:ivar parser: Handles low level parsing
:type parser: :class:`~certbot_apache.parser`
:ivar tup version: version of Apache
:ivar list vhosts: All vhosts found in the configuration
(:class:`list` of :class:`~certbot_apache.obj.VirtualHost`)
:ivar dict assoc: Mapping between domains and vhosts
"""
description = "Apache Web Server plugin"
if os.environ.get("CERTBOT_DOCS") == "1":
description += ( # pragma: no cover
" (Please note that the default values of the Apache plugin options"
" change depending on the operating system Certbot is run on.)"
)
OS_DEFAULTS = dict(
server_root="/etc/apache2",
vhost_root="/etc/apache2/sites-available",
vhost_files="*",
logs_root="/var/log/apache2",
ctl="apache2ctl",
version_cmd=['apache2ctl', '-v'],
restart_cmd=['apache2ctl', 'graceful'],
conftest_cmd=['apache2ctl', 'configtest'],
enmod=None,
dismod=None,
le_vhost_ext="-le-ssl.conf",
handle_modules=False,
handle_sites=False,
challenge_location="/etc/apache2",
MOD_SSL_CONF_SRC=pkg_resources.resource_filename(
"certbot_apache", "options-ssl-apache.conf")
)
def option(self, key):
"""Get a value from options"""
return self.options.get(key)
def _prepare_options(self):
"""
Set the values possibly changed by command line parameters to
OS_DEFAULTS constant dictionary
"""
opts = ["enmod", "dismod", "le_vhost_ext", "server_root", "vhost_root",
"logs_root", "challenge_location", "handle_modules", "handle_sites",
"ctl"]
for o in opts:
# Config options use dashes instead of underscores
if self.conf(o.replace("_", "-")) is not None:
self.options[o] = self.conf(o.replace("_", "-"))
else:
self.options[o] = self.OS_DEFAULTS[o]
# Special cases
self.options["version_cmd"][0] = self.option("ctl")
self.options["restart_cmd"][0] = self.option("ctl")
self.options["conftest_cmd"][0] = self.option("ctl")
@classmethod
def add_parser_arguments(cls, add):
# When adding, modifying or deleting command line arguments, be sure to
# include the changes in the list used in method _prepare_options() to
# ensure consistent behavior.
# Respect CERTBOT_DOCS environment variable and use default values from
# base class regardless of the underlying distribution (overrides).
if os.environ.get("CERTBOT_DOCS") == "1":
DEFAULTS = ApacheConfigurator.OS_DEFAULTS
else:
# cls.OS_DEFAULTS can be distribution specific, see override classes
DEFAULTS = cls.OS_DEFAULTS
add("enmod", default=DEFAULTS["enmod"],
help="Path to the Apache 'a2enmod' binary")
add("dismod", default=DEFAULTS["dismod"],
help="Path to the Apache 'a2dismod' binary")
add("le-vhost-ext", default=DEFAULTS["le_vhost_ext"],
help="SSL vhost configuration extension")
add("server-root", default=DEFAULTS["server_root"],
help="Apache server root directory")
add("vhost-root", default=None,
help="Apache server VirtualHost configuration root")
add("logs-root", default=DEFAULTS["logs_root"],
help="Apache server logs directory")
add("challenge-location",
default=DEFAULTS["challenge_location"],
help="Directory path for challenge configuration")
add("handle-modules", default=DEFAULTS["handle_modules"],
help="Let installer handle enabling required modules for you " +
"(Only Ubuntu/Debian currently)")
add("handle-sites", default=DEFAULTS["handle_sites"],
help="Let installer handle enabling sites for you " +
"(Only Ubuntu/Debian currently)")
add("ctl", default=DEFAULTS["ctl"],
help="Full path to Apache control script")
util.add_deprecated_argument(
add, argument_name="init-script", nargs=1)
def __init__(self, *args, **kwargs):
"""Initialize an Apache Configurator.
:param tup version: version of Apache as a tuple (2, 4, 7)
(used mostly for unittesting)
"""
version = kwargs.pop("version", None)
super(ApacheConfigurator, self).__init__(*args, **kwargs)
# Add name_server association dict
self.assoc = dict() # type: Dict[str, obj.VirtualHost]
# Outstanding challenges
self._chall_out = set() # type: Set[KeyAuthorizationAnnotatedChallenge]
# List of vhosts configured per wildcard domain on this run.
# used by deploy_cert() and enhance()
self._wildcard_vhosts = dict() # type: Dict[str, List[obj.VirtualHost]]
# Maps enhancements to vhosts we've enabled the enhancement for
self._enhanced_vhosts = defaultdict(set) # type: DefaultDict[str, Set[obj.VirtualHost]]
# Temporary state for AutoHSTS enhancement
self._autohsts = {} # type: Dict[str, Dict[str, Union[int, float]]]
# Reverter save notes
self.save_notes = ""
# These will be set in the prepare function
self._prepared = False
self.parser = None
self.version = version
self.vhosts = None
self.options = copy.deepcopy(self.OS_DEFAULTS)
self._enhance_func = {"redirect": self._enable_redirect,
"ensure-http-header": self._set_http_header,
"staple-ocsp": self._enable_ocsp_stapling}
@property
def mod_ssl_conf(self):
"""Full absolute path to SSL configuration file."""
return os.path.join(self.config.config_dir, constants.MOD_SSL_CONF_DEST)
@property
def updated_mod_ssl_conf_digest(self):
"""Full absolute path to digest of updated SSL configuration file."""
return os.path.join(self.config.config_dir, constants.UPDATED_MOD_SSL_CONF_DIGEST)
def prepare(self):
"""Prepare the authenticator/installer.
:raises .errors.NoInstallationError: If Apache configs cannot be found
:raises .errors.MisconfigurationError: If Apache is misconfigured
:raises .errors.NotSupportedError: If Apache version is not supported
:raises .errors.PluginError: If there is any other error
"""
self._prepare_options()
# Verify Apache is installed
self._verify_exe_availability(self.option("ctl"))
# Make sure configuration is valid
self.config_test()
# Set Version
if self.version is None:
self.version = self.get_version()
logger.debug('Apache version is %s',
'.'.join(str(i) for i in self.version))
if self.version < (2, 2):
raise errors.NotSupportedError(
"Apache Version {0} not supported.".format(str(self.version)))
# Recover from previous crash before Augeas initialization to have the
# correct parse tree from the get go.
self.recovery_routine()
# Perform the actual Augeas initialization to be able to react
self.parser = self.get_parser()
# Check for errors in parsing files with Augeas
self.parser.check_parsing_errors("httpd.aug")
# Get all of the available vhosts
self.vhosts = self.get_virtual_hosts()
self.install_ssl_options_conf(self.mod_ssl_conf,
self.updated_mod_ssl_conf_digest)
# Prevent two Apache plugins from modifying a config at once
try:
util.lock_dir_until_exit(self.option("server_root"))
except (OSError, errors.LockError):
logger.debug("Encountered error:", exc_info=True)
raise errors.PluginError(
"Unable to create a lock file in {0}. Are you running"
" Certbot with sufficient privileges to modify your"
" Apache configuration?".format(self.option("server_root")))
self._prepared = True
def save(self, title=None, temporary=False):
"""Saves all changes to the configuration files.
This function first checks for save errors, if none are found,
all configuration changes made will be saved. According to the
function parameters. If an exception is raised, a new checkpoint
was not created.
:param str title: The title of the save. If a title is given, the
configuration will be saved as a new checkpoint and put in a
timestamped directory.
:param bool temporary: Indicates whether the changes made will
be quickly reversed in the future (ie. challenges)
"""
save_files = self.parser.unsaved_files()
if save_files:
self.add_to_checkpoint(save_files,
self.save_notes, temporary=temporary)
# Handle the parser specific tasks
self.parser.save(save_files)
if title and not temporary:
self.finalize_checkpoint(title)
def recovery_routine(self):
"""Revert all previously modified files.
Reverts all modified files that have not been saved as a checkpoint
:raises .errors.PluginError: If unable to recover the configuration
"""
super(ApacheConfigurator, self).recovery_routine()
# Reload configuration after these changes take effect if needed
# ie. ApacheParser has been initialized.
if self.parser:
# TODO: wrap into non-implementation specific parser interface
self.parser.aug.load()
def revert_challenge_config(self):
"""Used to cleanup challenge configurations.
:raises .errors.PluginError: If unable to revert the challenge config.
"""
self.revert_temporary_config()
self.parser.aug.load()
def rollback_checkpoints(self, rollback=1):
"""Rollback saved checkpoints.
:param int rollback: Number of checkpoints to revert
:raises .errors.PluginError: If there is a problem with the input or
the function is unable to correctly revert the configuration
"""
super(ApacheConfigurator, self).rollback_checkpoints(rollback)
self.parser.aug.load()
def _verify_exe_availability(self, exe):
"""Checks availability of Apache executable"""
if not util.exe_exists(exe):
if not path_surgery(exe):
raise errors.NoInstallationError(
'Cannot find Apache executable {0}'.format(exe))
def get_parser(self):
"""Initializes the ApacheParser"""
# If user provided vhost_root value in command line, use it
return parser.ApacheParser(
self.option("server_root"), self.conf("vhost-root"),
self.version, configurator=self)
def _wildcard_domain(self, domain):
"""
Checks if domain is a wildcard domain
:param str domain: Domain to check
:returns: If the domain is wildcard domain
:rtype: bool
"""
if isinstance(domain, six.text_type):
wildcard_marker = u"*."
else:
wildcard_marker = b"*."
return domain.startswith(wildcard_marker)
def deploy_cert(self, domain, cert_path, key_path,
chain_path=None, fullchain_path=None):
"""Deploys certificate to specified virtual host.
Currently tries to find the last directives to deploy the certificate
in the VHost associated with the given domain. If it can't find the
directives, it searches the "included" confs. The function verifies
that it has located the three directives and finally modifies them
to point to the correct destination. After the certificate is
installed, the VirtualHost is enabled if it isn't already.
.. todo:: Might be nice to remove chain directive if none exists
This shouldn't happen within certbot though
:raises errors.PluginError: When unable to deploy certificate due to
a lack of directives
"""
vhosts = self.choose_vhosts(domain)
for vhost in vhosts:
self._deploy_cert(vhost, cert_path, key_path, chain_path, fullchain_path)
def choose_vhosts(self, domain, create_if_no_ssl=True):
"""
Finds VirtualHosts that can be used with the provided domain
:param str domain: Domain name to match VirtualHosts to
:param bool create_if_no_ssl: If found VirtualHost doesn't have a HTTPS
counterpart, should one get created
:returns: List of VirtualHosts or None
:rtype: `list` of :class:`~certbot_apache.obj.VirtualHost`
"""
if self._wildcard_domain(domain):
if domain in self._wildcard_vhosts:
# Vhosts for a wildcard domain were already selected
return self._wildcard_vhosts[domain]
# Ask user which VHosts to support.
# Returned objects are guaranteed to be ssl vhosts
return self._choose_vhosts_wildcard(domain, create_if_no_ssl)
else:
return [self.choose_vhost(domain, create_if_no_ssl)]
def _vhosts_for_wildcard(self, domain):
"""
Get VHost objects for every VirtualHost that the user wants to handle
with the wildcard certificate.
"""
# Collect all vhosts that match the name
matched = set()
for vhost in self.vhosts:
for name in vhost.get_names():
if self._in_wildcard_scope(name, domain):
matched.add(vhost)
return list(matched)
def _in_wildcard_scope(self, name, domain):
"""
Helper method for _vhosts_for_wildcard() that makes sure that the domain
is in the scope of wildcard domain.
eg. in scope: domain = *.wild.card, name = 1.wild.card
not in scope: domain = *.wild.card, name = 1.2.wild.card
"""
if len(name.split(".")) == len(domain.split(".")):
return fnmatch.fnmatch(name, domain)
return None
def _choose_vhosts_wildcard(self, domain, create_ssl=True):
"""Prompts user to choose vhosts to install a wildcard certificate for"""
# Get all vhosts that are covered by the wildcard domain
vhosts = self._vhosts_for_wildcard(domain)
# Go through the vhosts, making sure that we cover all the names
# present, but preferring the SSL vhosts
filtered_vhosts = dict()
for vhost in vhosts:
for name in vhost.get_names():
if vhost.ssl:
# Always prefer SSL vhosts
filtered_vhosts[name] = vhost
elif name not in filtered_vhosts and create_ssl:
# Add if not in list previously
filtered_vhosts[name] = vhost
# Only unique VHost objects
dialog_input = set([vhost for vhost in filtered_vhosts.values()])
# Ask the user which of names to enable, expect list of names back
dialog_output = display_ops.select_vhost_multiple(list(dialog_input))
if not dialog_output:
logger.error(
"No vhost exists with servername or alias for domain %s. "
"No vhost was selected. Please specify ServerName or ServerAlias "
"in the Apache config.",
domain)
raise errors.PluginError("No vhost selected")
# Make sure we create SSL vhosts for the ones that are HTTP only
# if requested.
return_vhosts = list()
for vhost in dialog_output:
if not vhost.ssl:
return_vhosts.append(self.make_vhost_ssl(vhost))
else:
return_vhosts.append(vhost)
self._wildcard_vhosts[domain] = return_vhosts
return return_vhosts
def _deploy_cert(self, vhost, cert_path, key_path, chain_path, fullchain_path):
"""
Helper function for deploy_cert() that handles the actual deployment
this exists because we might want to do multiple deployments per
domain originally passed for deploy_cert(). This is especially true
with wildcard certificates
"""
# This is done first so that ssl module is enabled and cert_path,
# cert_key... can all be parsed appropriately
self.prepare_server_https("443")
# Add directives and remove duplicates
self._add_dummy_ssl_directives(vhost.path)
self._clean_vhost(vhost)
path = {"cert_path": self.parser.find_dir("SSLCertificateFile",
None, vhost.path),
"cert_key": self.parser.find_dir("SSLCertificateKeyFile",
None, vhost.path)}
# Only include if a certificate chain is specified
if chain_path is not None:
path["chain_path"] = self.parser.find_dir(
"SSLCertificateChainFile", None, vhost.path)
# Handle errors when certificate/key directives cannot be found
if not path["cert_path"]:
logger.warning(
"Cannot find an SSLCertificateFile directive in %s. "
"VirtualHost was not modified", vhost.path)
raise errors.PluginError(
"Unable to find an SSLCertificateFile directive")
elif not path["cert_key"]:
logger.warning(
"Cannot find an SSLCertificateKeyFile directive for "
"certificate in %s. VirtualHost was not modified", vhost.path)
raise errors.PluginError(
"Unable to find an SSLCertificateKeyFile directive for "
"certificate")
logger.info("Deploying Certificate to VirtualHost %s", vhost.filep)
if self.version < (2, 4, 8) or (chain_path and not fullchain_path):
# install SSLCertificateFile, SSLCertificateKeyFile,
# and SSLCertificateChainFile directives
set_cert_path = cert_path
self.parser.aug.set(path["cert_path"][-1], cert_path)
self.parser.aug.set(path["cert_key"][-1], key_path)
if chain_path is not None:
self.parser.add_dir(vhost.path,
"SSLCertificateChainFile", chain_path)
else:
raise errors.PluginError("--chain-path is required for your "
"version of Apache")
else:
if not fullchain_path:
raise errors.PluginError("Please provide the --fullchain-path "
"option pointing to your full chain file")
set_cert_path = fullchain_path
self.parser.aug.set(path["cert_path"][-1], fullchain_path)
self.parser.aug.set(path["cert_key"][-1], key_path)
# Enable the new vhost if needed
if not vhost.enabled:
self.enable_site(vhost)
# Save notes about the transaction that took place
self.save_notes += ("Changed vhost at %s with addresses of %s\n"
"\tSSLCertificateFile %s\n"
"\tSSLCertificateKeyFile %s\n" %
(vhost.filep,
", ".join(str(addr) for addr in vhost.addrs),
set_cert_path, key_path))
if chain_path is not None:
self.save_notes += "\tSSLCertificateChainFile %s\n" % chain_path
def choose_vhost(self, target_name, create_if_no_ssl=True):
"""Chooses a virtual host based on the given domain name.
If there is no clear virtual host to be selected, the user is prompted
with all available choices.
The returned vhost is guaranteed to have TLS enabled unless
create_if_no_ssl is set to False, in which case there is no such guarantee
and the result is not cached.
:param str target_name: domain name
:param bool create_if_no_ssl: If found VirtualHost doesn't have a HTTPS
counterpart, should one get created
:returns: vhost associated with name
:rtype: :class:`~certbot_apache.obj.VirtualHost`
:raises .errors.PluginError: If no vhost is available or chosen
"""
# Allows for domain names to be associated with a virtual host
if target_name in self.assoc:
return self.assoc[target_name]
# Try to find a reasonable vhost
vhost = self._find_best_vhost(target_name)
if vhost is not None:
if not create_if_no_ssl:
return vhost
if not vhost.ssl:
vhost = self.make_vhost_ssl(vhost)
self._add_servername_alias(target_name, vhost)
self.assoc[target_name] = vhost
return vhost
# Negate create_if_no_ssl value to indicate if we want a SSL vhost
# to get created if a non-ssl vhost is selected.
return self._choose_vhost_from_list(target_name, temp=not create_if_no_ssl)
def _choose_vhost_from_list(self, target_name, temp=False):
# Select a vhost from a list
vhost = display_ops.select_vhost(target_name, self.vhosts)
if vhost is None:
logger.error(
"No vhost exists with servername or alias of %s. "
"No vhost was selected. Please specify ServerName or ServerAlias "
"in the Apache config.",
target_name)
raise errors.PluginError("No vhost selected")
elif temp:
return vhost
elif not vhost.ssl:
addrs = self._get_proposed_addrs(vhost, "443")
# TODO: Conflicts is too conservative
if not any(vhost.enabled and vhost.conflicts(addrs) for
vhost in self.vhosts):
vhost = self.make_vhost_ssl(vhost)
else:
logger.error(
"The selected vhost would conflict with other HTTPS "
"VirtualHosts within Apache. Please select another "
"vhost or add ServerNames to your configuration.")
raise errors.PluginError(
"VirtualHost not able to be selected.")
self._add_servername_alias(target_name, vhost)
self.assoc[target_name] = vhost
return vhost
def domain_in_names(self, names, target_name):
"""Checks if target domain is covered by one or more of the provided
names. The target name is matched by wildcard as well as exact match.
:param names: server aliases
:type names: `collections.Iterable` of `str`
:param str target_name: name to compare with wildcards
:returns: True if target_name is covered by a wildcard,
otherwise, False
:rtype: bool
"""
# use lowercase strings because fnmatch can be case sensitive
target_name = target_name.lower()
for name in names:
name = name.lower()
# fnmatch treats "[seq]" specially and [ or ] characters aren't
# valid in Apache but Apache doesn't error out if they are present
if "[" not in name and fnmatch.fnmatch(target_name, name):
return True
return False
def find_best_http_vhost(self, target, filter_defaults, port="80"):
"""Returns non-HTTPS vhost objects found from the Apache config
:param str target: Domain name of the desired VirtualHost
:param bool filter_defaults: whether _default_ vhosts should be
included if it is the best match
:param str port: port number the vhost should be listening on
:returns: VirtualHost object that's the best match for target name
:rtype: `obj.VirtualHost` or None
"""
filtered_vhosts = []
for vhost in self.vhosts:
if any(a.is_wildcard() or a.get_port() == port for a in vhost.addrs) and not vhost.ssl:
filtered_vhosts.append(vhost)
return self._find_best_vhost(target, filtered_vhosts, filter_defaults)
def _find_best_vhost(self, target_name, vhosts=None, filter_defaults=True):
"""Finds the best vhost for a target_name.
This does not upgrade a vhost to HTTPS... it only finds the most
appropriate vhost for the given target_name.
:param str target_name: domain handled by the desired vhost
:param vhosts: vhosts to consider
:type vhosts: `collections.Iterable` of :class:`~certbot_apache.obj.VirtualHost`
:param bool filter_defaults: whether a vhost with a _default_
addr is acceptable
:returns: VHost or None
"""
# Points 6 - Servername SSL
# Points 5 - Wildcard SSL
# Points 4 - Address name with SSL
# Points 3 - Servername no SSL
# Points 2 - Wildcard no SSL
# Points 1 - Address name with no SSL
best_candidate = None
best_points = 0
if vhosts is None:
vhosts = self.vhosts
for vhost in vhosts:
if vhost.modmacro is True:
continue
names = vhost.get_names()
if target_name in names:
points = 3
elif self.domain_in_names(names, target_name):
points = 2
elif any(addr.get_addr() == target_name for addr in vhost.addrs):
points = 1
else:
# No points given if names can't be found.
# This gets hit but doesn't register
continue # pragma: no cover
if vhost.ssl:
points += 3
if points > best_points:
best_points = points
best_candidate = vhost
# No winners here... is there only one reasonable vhost?
if best_candidate is None:
if filter_defaults:
vhosts = self._non_default_vhosts(vhosts)
# remove mod_macro hosts from reasonable vhosts
reasonable_vhosts = [vh for vh
in vhosts if vh.modmacro is False]
if len(reasonable_vhosts) == 1:
best_candidate = reasonable_vhosts[0]
return best_candidate
def _non_default_vhosts(self, vhosts):
"""Return all non _default_ only vhosts."""
return [vh for vh in vhosts if not all(
addr.get_addr() == "_default_" for addr in vh.addrs
)]
def get_all_names(self):
"""Returns all names found in the Apache Configuration.
:returns: All ServerNames, ServerAliases, and reverse DNS entries for
virtual host addresses
:rtype: set
"""
all_names = set() # type: Set[str]
vhost_macro = []
for vhost in self.vhosts:
all_names.update(vhost.get_names())
if vhost.modmacro:
vhost_macro.append(vhost.filep)
for addr in vhost.addrs:
if common.hostname_regex.match(addr.get_addr()):
all_names.add(addr.get_addr())
else:
name = self.get_name_from_ip(addr)
if name:
all_names.add(name)
if vhost_macro:
zope.component.getUtility(interfaces.IDisplay).notification(
"Apache mod_macro seems to be in use in file(s):\n{0}"
"\n\nUnfortunately mod_macro is not yet supported".format(
"\n ".join(vhost_macro)), force_interactive=True)
return util.get_filtered_names(all_names)
def get_name_from_ip(self, addr): # pylint: disable=no-self-use
"""Returns a reverse dns name if available.
:param addr: IP Address
:type addr: ~.common.Addr
:returns: name or empty string if name cannot be determined
:rtype: str
"""
# If it isn't a private IP, do a reverse DNS lookup
if not common.private_ips_regex.match(addr.get_addr()):
try:
socket.inet_aton(addr.get_addr())
return socket.gethostbyaddr(addr.get_addr())[0]
except (socket.error, socket.herror, socket.timeout):
pass
return ""
def _get_vhost_names(self, path):
"""Helper method for getting the ServerName and
ServerAlias values from vhost in path
:param path: Path to read ServerName and ServerAliases from
:returns: Tuple including ServerName and `list` of ServerAlias strings
"""
servername_match = self.parser.find_dir(
"ServerName", None, start=path, exclude=False)
serveralias_match = self.parser.find_dir(
"ServerAlias", None, start=path, exclude=False)
serveraliases = []
for alias in serveralias_match:
serveralias = self.parser.get_arg(alias)
serveraliases.append(serveralias)
servername = None
if servername_match:
# Get last ServerName as each overwrites the previous
servername = self.parser.get_arg(servername_match[-1])
return (servername, serveraliases)
def _add_servernames(self, host):
"""Helper function for get_virtual_hosts().
:param host: In progress vhost whose names will be added
:type host: :class:`~certbot_apache.obj.VirtualHost`
"""
servername, serveraliases = self._get_vhost_names(host.path)
for alias in serveraliases:
if not host.modmacro:
host.aliases.add(alias)
if not host.modmacro:
host.name = servername
def _create_vhost(self, path):
"""Used by get_virtual_hosts to create vhost objects
:param str path: Augeas path to virtual host
:returns: newly created vhost
:rtype: :class:`~certbot_apache.obj.VirtualHost`
"""
addrs = set()
try:
args = self.parser.aug.match(path + "/arg")
except RuntimeError:
logger.warning("Encountered a problem while parsing file: %s, skipping", path)
return None
for arg in args:
addrs.add(obj.Addr.fromstring(self.parser.get_arg(arg)))
is_ssl = False
if self.parser.find_dir("SSLEngine", "on", start=path, exclude=False):
is_ssl = True
# "SSLEngine on" might be set outside of
# Treat vhosts with port 443 as ssl vhosts
for addr in addrs:
if addr.get_port() == "443":
is_ssl = True
filename = apache_util.get_file_path(
self.parser.aug.get("/augeas/files%s/path" % apache_util.get_file_path(path)))
if filename is None:
return None
macro = False
if "/macro/" in path.lower():
macro = True
vhost_enabled = self.parser.parsed_in_original(filename)
vhost = obj.VirtualHost(filename, path, addrs, is_ssl,
vhost_enabled, modmacro=macro)
self._add_servernames(vhost)
return vhost
def get_virtual_hosts(self):
"""Returns list of virtual hosts found in the Apache configuration.
:returns: List of :class:`~certbot_apache.obj.VirtualHost`
objects found in configuration
:rtype: list
"""
# Search base config, and all included paths for VirtualHosts
file_paths = {} # type: Dict[str, str]
internal_paths = defaultdict(set) # type: DefaultDict[str, Set[str]]
vhs = []
# Make a list of parser paths because the parser_paths
# dictionary may be modified during the loop.
for vhost_path in list(self.parser.parser_paths):
paths = self.parser.aug.match(
("/files%s//*[label()=~regexp('%s')]" %
(vhost_path, parser.case_i("VirtualHost"))))
paths = [path for path in paths if
"virtualhost" in os.path.basename(path).lower()]
for path in paths:
new_vhost = self._create_vhost(path)
if not new_vhost:
continue
internal_path = apache_util.get_internal_aug_path(new_vhost.path)
realpath = filesystem.realpath(new_vhost.filep)
if realpath not in file_paths:
file_paths[realpath] = new_vhost.filep
internal_paths[realpath].add(internal_path)
vhs.append(new_vhost)
elif (realpath == new_vhost.filep and
realpath != file_paths[realpath]):
# Prefer "real" vhost paths instead of symlinked ones
# ex: sites-enabled/vh.conf -> sites-available/vh.conf
# remove old (most likely) symlinked one
new_vhs = []
for v in vhs:
if v.filep == file_paths[realpath]:
internal_paths[realpath].remove(
apache_util.get_internal_aug_path(v.path))
else:
new_vhs.append(v)
vhs = new_vhs
file_paths[realpath] = realpath
internal_paths[realpath].add(internal_path)
vhs.append(new_vhost)
elif internal_path not in internal_paths[realpath]:
internal_paths[realpath].add(internal_path)
vhs.append(new_vhost)
return vhs
def is_name_vhost(self, target_addr):
"""Returns if vhost is a name based vhost
NameVirtualHost was deprecated in Apache 2.4 as all VirtualHosts are
now NameVirtualHosts. If version is earlier than 2.4, check if addr
has a NameVirtualHost directive in the Apache config
:param certbot_apache.obj.Addr target_addr: vhost address
:returns: Success
:rtype: bool
"""
# Mixed and matched wildcard NameVirtualHost with VirtualHost
# behavior is undefined. Make sure that an exact match exists
# search for NameVirtualHost directive for ip_addr
# note ip_addr can be FQDN although Apache does not recommend it
return (self.version >= (2, 4) or
self.parser.find_dir("NameVirtualHost", str(target_addr)))
def add_name_vhost(self, addr):
"""Adds NameVirtualHost directive for given address.
:param addr: Address that will be added as NameVirtualHost directive
:type addr: :class:`~certbot_apache.obj.Addr`
"""
loc = parser.get_aug_path(self.parser.loc["name"])
if addr.get_port() == "443":
path = self.parser.add_dir_to_ifmodssl(
loc, "NameVirtualHost", [str(addr)])
else:
path = self.parser.add_dir(loc, "NameVirtualHost", [str(addr)])
msg = ("Setting %s to be NameBasedVirtualHost\n"
"\tDirective added to %s\n" % (addr, path))
logger.debug(msg)
self.save_notes += msg
def prepare_server_https(self, port, temp=False):
"""Prepare the server for HTTPS.
Make sure that the ssl_module is loaded and that the server
is appropriately listening on port.
:param str port: Port to listen on
"""
self.prepare_https_modules(temp)
self.ensure_listen(port, https=True)
def ensure_listen(self, port, https=False):
"""Make sure that Apache is listening on the port. Checks if the
Listen statement for the port already exists, and adds it to the
configuration if necessary.
:param str port: Port number to check and add Listen for if not in
place already
:param bool https: If the port will be used for HTTPS
"""
# If HTTPS requested for nonstandard port, add service definition
if https and port != "443":
port_service = "%s %s" % (port, "https")
else:
port_service = port
# Check for Listen
# Note: This could be made to also look for ip:443 combo
listens = [self.parser.get_arg(x).split()[0] for
x in self.parser.find_dir("Listen")]
# Listen already in place
if self._has_port_already(listens, port):
return
listen_dirs = set(listens)
if not listens:
listen_dirs.add(port_service)
for listen in listens:
# For any listen statement, check if the machine also listens on
# the given port. If not, add such a listen statement.
if len(listen.split(":")) == 1:
# Its listening to all interfaces
if port not in listen_dirs and port_service not in listen_dirs:
listen_dirs.add(port_service)
else:
# The Listen statement specifies an ip
_, ip = listen[::-1].split(":", 1)
ip = ip[::-1]
if "%s:%s" % (ip, port_service) not in listen_dirs and (
"%s:%s" % (ip, port_service) not in listen_dirs):
listen_dirs.add("%s:%s" % (ip, port_service))
if https:
self._add_listens_https(listen_dirs, listens, port)
else:
self._add_listens_http(listen_dirs, listens, port)
def _add_listens_http(self, listens, listens_orig, port):
"""Helper method for ensure_listen to figure out which new
listen statements need adding for listening HTTP on port
:param set listens: Set of all needed Listen statements
:param list listens_orig: List of existing listen statements
:param string port: Port number we're adding
"""
new_listens = listens.difference(listens_orig)
if port in new_listens:
# We have wildcard, skip the rest
self.parser.add_dir(parser.get_aug_path(self.parser.loc["listen"]),
"Listen", port)
self.save_notes += "Added Listen %s directive to %s\n" % (
port, self.parser.loc["listen"])
else:
for listen in new_listens:
self.parser.add_dir(parser.get_aug_path(
self.parser.loc["listen"]), "Listen", listen.split(" "))
self.save_notes += ("Added Listen %s directive to "
"%s\n") % (listen,
self.parser.loc["listen"])
def _add_listens_https(self, listens, listens_orig, port):
"""Helper method for ensure_listen to figure out which new
listen statements need adding for listening HTTPS on port
:param set listens: Set of all needed Listen statements
:param list listens_orig: List of existing listen statements
:param string port: Port number we're adding
"""
# Add service definition for non-standard ports
if port != "443":
port_service = "%s %s" % (port, "https")
else:
port_service = port
new_listens = listens.difference(listens_orig)
if port in new_listens or port_service in new_listens:
# We have wildcard, skip the rest
self.parser.add_dir_to_ifmodssl(
parser.get_aug_path(self.parser.loc["listen"]),
"Listen", port_service.split(" "))
self.save_notes += "Added Listen %s directive to %s\n" % (
port_service, self.parser.loc["listen"])
else:
for listen in new_listens:
self.parser.add_dir_to_ifmodssl(
parser.get_aug_path(self.parser.loc["listen"]),
"Listen", listen.split(" "))
self.save_notes += ("Added Listen %s directive to "
"%s\n") % (listen,
self.parser.loc["listen"])
def _has_port_already(self, listens, port):
"""Helper method for prepare_server_https to find out if user
already has an active Listen statement for the port we need
:param list listens: List of listen variables
:param string port: Port in question
"""
if port in listens:
return True
# Check if Apache is already listening on a specific IP
for listen in listens:
if len(listen.split(":")) > 1:
# Ugly but takes care of protocol def, eg: 1.1.1.1:443 https
if listen.split(":")[-1].split(" ")[0] == port:
return True
return None
def prepare_https_modules(self, temp):
"""Helper method for prepare_server_https, taking care of enabling
needed modules
:param boolean temp: If the change is temporary
"""
if self.option("handle_modules"):
if self.version >= (2, 4) and ("socache_shmcb_module" not in
self.parser.modules):
self.enable_mod("socache_shmcb", temp=temp)
if "ssl_module" not in self.parser.modules:
self.enable_mod("ssl", temp=temp)
def make_vhost_ssl(self, nonssl_vhost): # pylint: disable=too-many-locals
"""Makes an ssl_vhost version of a nonssl_vhost.
Duplicates vhost and adds default ssl options
New vhost will reside as (nonssl_vhost.path) +
``self.option("le_vhost_ext")``
.. note:: This function saves the configuration
:param nonssl_vhost: Valid VH that doesn't have SSLEngine on
:type nonssl_vhost: :class:`~certbot_apache.obj.VirtualHost`
:returns: SSL vhost
:rtype: :class:`~certbot_apache.obj.VirtualHost`
:raises .errors.PluginError: If more than one virtual host is in
the file or if plugin is unable to write/read vhost files.
"""
avail_fp = nonssl_vhost.filep
ssl_fp = self._get_ssl_vhost_path(avail_fp)
orig_matches = self.parser.aug.match("/files%s//* [label()=~regexp('%s')]" %
(self._escape(ssl_fp),
parser.case_i("VirtualHost")))
self._copy_create_ssl_vhost_skeleton(nonssl_vhost, ssl_fp)
# Reload augeas to take into account the new vhost
self.parser.aug.load()
# Get Vhost augeas path for new vhost
new_matches = self.parser.aug.match("/files%s//* [label()=~regexp('%s')]" %
(self._escape(ssl_fp),
parser.case_i("VirtualHost")))
vh_p = self._get_new_vh_path(orig_matches, new_matches)
if not vh_p:
# The vhost was not found on the currently parsed paths
# Make Augeas aware of the new vhost
self.parser.parse_file(ssl_fp)
# Try to search again
new_matches = self.parser.aug.match(
"/files%s//* [label()=~regexp('%s')]" %
(self._escape(ssl_fp),
parser.case_i("VirtualHost")))
vh_p = self._get_new_vh_path(orig_matches, new_matches)
if not vh_p:
raise errors.PluginError(
"Could not reverse map the HTTPS VirtualHost to the original")
# Update Addresses
self._update_ssl_vhosts_addrs(vh_p)
# Log actions and create save notes
logger.info("Created an SSL vhost at %s", ssl_fp)
self.save_notes += "Created ssl vhost at %s\n" % ssl_fp
self.save()
# We know the length is one because of the assertion above
# Create the Vhost object
ssl_vhost = self._create_vhost(vh_p)
ssl_vhost.ancestor = nonssl_vhost
self.vhosts.append(ssl_vhost)
# NOTE: Searches through Augeas seem to ruin changes to directives
# The configuration must also be saved before being searched
# for the new directives; For these reasons... this is tacked
# on after fully creating the new vhost
# Now check if addresses need to be added as NameBasedVhost addrs
# This is for compliance with versions of Apache < 2.4
self._add_name_vhost_if_necessary(ssl_vhost)
return ssl_vhost
def _get_new_vh_path(self, orig_matches, new_matches):
""" Helper method for make_vhost_ssl for matching augeas paths. Returns
VirtualHost path from new_matches that's not present in orig_matches.
Paths are normalized, because augeas leaves indices out for paths
with only single directive with a similar key """
orig_matches = [i.replace("[1]", "") for i in orig_matches]
for match in new_matches:
if match.replace("[1]", "") not in orig_matches:
# Return the unmodified path
return match
return None
def _get_ssl_vhost_path(self, non_ssl_vh_fp):
""" Get a file path for SSL vhost, uses user defined path as priority,
but if the value is invalid or not defined, will fall back to non-ssl
vhost filepath.
:param str non_ssl_vh_fp: Filepath of non-SSL vhost
:returns: Filepath for SSL vhost
:rtype: str
"""
if self.conf("vhost-root") and os.path.exists(self.conf("vhost-root")):
fp = os.path.join(filesystem.realpath(self.option("vhost_root")),
os.path.basename(non_ssl_vh_fp))
else:
# Use non-ssl filepath
fp = filesystem.realpath(non_ssl_vh_fp)
if fp.endswith(".conf"):
return fp[:-(len(".conf"))] + self.option("le_vhost_ext")
return fp + self.option("le_vhost_ext")
def _sift_rewrite_rule(self, line):
"""Decides whether a line should be copied to a SSL vhost.
A canonical example of when sifting a line is required:
When the http vhost contains a RewriteRule that unconditionally
redirects any request to the https version of the same site.
e.g:
RewriteRule ^ https://%{SERVER_NAME}%{REQUEST_URI} [L,QSA,R=permanent]
Copying the above line to the ssl vhost would cause a
redirection loop.
:param str line: a line extracted from the http vhost.
:returns: True - don't copy line from http vhost to SSL vhost.
:rtype: bool
"""
if not line.lower().lstrip().startswith("rewriterule"):
return False
# According to: http://httpd.apache.org/docs/2.4/rewrite/flags.html
# The syntax of a RewriteRule is:
# RewriteRule pattern target [Flag1,Flag2,Flag3]
# i.e. target is required, so it must exist.
target = line.split()[2].strip()
# target may be surrounded with quotes
if target[0] in ("'", '"') and target[0] == target[-1]:
target = target[1:-1]
# Sift line if it redirects the request to a HTTPS site
return target.startswith("https://")
def _copy_create_ssl_vhost_skeleton(self, vhost, ssl_fp):
"""Copies over existing Vhost with IfModule mod_ssl.c> skeleton.
:param obj.VirtualHost vhost: Original VirtualHost object
:param str ssl_fp: Full path where the new ssl_vhost will reside.
A new file is created on the filesystem.
"""
# First register the creation so that it is properly removed if
# configuration is rolled back
if os.path.exists(ssl_fp):
notes = "Appended new VirtualHost directive to file %s" % ssl_fp
files = set()
files.add(ssl_fp)
self.reverter.add_to_checkpoint(files, notes)
else:
self.reverter.register_file_creation(False, ssl_fp)
sift = False
try:
orig_contents = self._get_vhost_block(vhost)
ssl_vh_contents, sift = self._sift_rewrite_rules(orig_contents)
with open(ssl_fp, "a") as new_file:
new_file.write("\n")
new_file.write("\n".join(ssl_vh_contents))
# The content does not include the closing tag, so add it
new_file.write("\n")
new_file.write("\n")
# Add new file to augeas paths if we're supposed to handle
# activation (it's not included as default)
if not self.parser.parsed_in_current(ssl_fp):
self.parser.parse_file(ssl_fp)
except IOError:
logger.critical("Error writing/reading to file in make_vhost_ssl", exc_info=True)
raise errors.PluginError("Unable to write/read in make_vhost_ssl")
if sift:
reporter = zope.component.getUtility(interfaces.IReporter)
reporter.add_message(
"Some rewrite rules copied from {0} were disabled in the "
"vhost for your HTTPS site located at {1} because they have "
"the potential to create redirection loops.".format(
vhost.filep, ssl_fp), reporter.MEDIUM_PRIORITY)
self.parser.aug.set("/augeas/files%s/mtime" % (self._escape(ssl_fp)), "0")
self.parser.aug.set("/augeas/files%s/mtime" % (self._escape(vhost.filep)), "0")
def _sift_rewrite_rules(self, contents):
""" Helper function for _copy_create_ssl_vhost_skeleton to prepare the
new HTTPS VirtualHost contents. Currently disabling the rewrites """
result = []
sift = False
contents = iter(contents)
comment = ("# Some rewrite rules in this file were "
"disabled on your HTTPS site,\n"
"# because they have the potential to create "
"redirection loops.\n")
for line in contents:
A = line.lower().lstrip().startswith("rewritecond")
B = line.lower().lstrip().startswith("rewriterule")
if not (A or B):
result.append(line)
continue
# A RewriteRule that doesn't need filtering
if B and not self._sift_rewrite_rule(line):
result.append(line)
continue
# A RewriteRule that does need filtering
if B and self._sift_rewrite_rule(line):
if not sift:
result.append(comment)
sift = True
result.append("# " + line)
continue
# We save RewriteCond(s) and their corresponding
# RewriteRule in 'chunk'.
# We then decide whether we comment out the entire
# chunk based on its RewriteRule.
chunk = []
if A:
chunk.append(line)
line = next(contents)
# RewriteCond(s) must be followed by one RewriteRule
while not line.lower().lstrip().startswith("rewriterule"):
chunk.append(line)
line = next(contents)
# Now, current line must start with a RewriteRule
chunk.append(line)
if self._sift_rewrite_rule(line):
if not sift:
result.append(comment)
sift = True
result.append('\n'.join(
['# ' + l for l in chunk]))
continue
else:
result.append('\n'.join(chunk))
continue
return result, sift
def _get_vhost_block(self, vhost):
""" Helper method to get VirtualHost contents from the original file.
This is done with help of augeas span, which returns the span start and
end positions
:returns: `list` of VirtualHost block content lines without closing tag
"""
try:
span_val = self.parser.aug.span(vhost.path)
except ValueError:
logger.critical("Error while reading the VirtualHost %s from "
"file %s", vhost.name, vhost.filep, exc_info=True)
raise errors.PluginError("Unable to read VirtualHost from file")
span_filep = span_val[0]
span_start = span_val[5]
span_end = span_val[6]
with open(span_filep, 'r') as fh:
fh.seek(span_start)
vh_contents = fh.read(span_end-span_start).split("\n")
self._remove_closing_vhost_tag(vh_contents)
return vh_contents
def _remove_closing_vhost_tag(self, vh_contents):
"""Removes the closing VirtualHost tag if it exists.
This method modifies vh_contents directly to remove the closing
tag. If the closing vhost tag is found, everything on the line
after it is also removed. Whether or not this tag is included
in the result of span depends on the Augeas version.
:param list vh_contents: VirtualHost block contents to check
"""
for offset, line in enumerate(reversed(vh_contents)):
if line:
line_index = line.lower().find("")
if line_index != -1:
content_index = len(vh_contents) - offset - 1
vh_contents[content_index] = line[:line_index]
break
def _update_ssl_vhosts_addrs(self, vh_path):
ssl_addrs = set()
ssl_addr_p = self.parser.aug.match(vh_path + "/arg")
for addr in ssl_addr_p:
old_addr = obj.Addr.fromstring(
str(self.parser.get_arg(addr)))
ssl_addr = old_addr.get_addr_obj("443")
self.parser.aug.set(addr, str(ssl_addr))
ssl_addrs.add(ssl_addr)
return ssl_addrs
def _clean_vhost(self, vhost):
# remove duplicated or conflicting ssl directives
self._deduplicate_directives(vhost.path,
["SSLCertificateFile",
"SSLCertificateKeyFile"])
# remove all problematic directives
self._remove_directives(vhost.path, ["SSLCertificateChainFile"])
def _deduplicate_directives(self, vh_path, directives):
for directive in directives:
while len(self.parser.find_dir(directive, None,
vh_path, False)) > 1:
directive_path = self.parser.find_dir(directive, None,
vh_path, False)
self.parser.aug.remove(re.sub(r"/\w*$", "", directive_path[0]))
def _remove_directives(self, vh_path, directives):
for directive in directives:
while self.parser.find_dir(directive, None, vh_path, False):
directive_path = self.parser.find_dir(directive, None,
vh_path, False)
self.parser.aug.remove(re.sub(r"/\w*$", "", directive_path[0]))
def _add_dummy_ssl_directives(self, vh_path):
self.parser.add_dir(vh_path, "SSLCertificateFile",
"insert_cert_file_path")
self.parser.add_dir(vh_path, "SSLCertificateKeyFile",
"insert_key_file_path")
# Only include the TLS configuration if not already included
existing_inc = self.parser.find_dir("Include", self.mod_ssl_conf, vh_path)
if not existing_inc:
self.parser.add_dir(vh_path, "Include", self.mod_ssl_conf)
def _add_servername_alias(self, target_name, vhost):
vh_path = vhost.path
sname, saliases = self._get_vhost_names(vh_path)
if target_name == sname or target_name in saliases:
return
if self._has_matching_wildcard(vh_path, target_name):
return
if not self.parser.find_dir("ServerName", None,
start=vh_path, exclude=False):
self.parser.add_dir(vh_path, "ServerName", target_name)
else:
self.parser.add_dir(vh_path, "ServerAlias", target_name)
self._add_servernames(vhost)
def _has_matching_wildcard(self, vh_path, target_name):
"""Is target_name already included in a wildcard in the vhost?
:param str vh_path: Augeas path to the vhost
:param str target_name: name to compare with wildcards
:returns: True if there is a wildcard covering target_name in
the vhost in vhost_path, otherwise, False
:rtype: bool
"""
matches = self.parser.find_dir(
"ServerAlias", start=vh_path, exclude=False)
aliases = (self.parser.aug.get(match) for match in matches)
return self.domain_in_names(aliases, target_name)
def _add_name_vhost_if_necessary(self, vhost):
"""Add NameVirtualHost Directives if necessary for new vhost.
NameVirtualHosts was a directive in Apache < 2.4
https://httpd.apache.org/docs/2.2/mod/core.html#namevirtualhost
:param vhost: New virtual host that was recently created.
:type vhost: :class:`~certbot_apache.obj.VirtualHost`
"""
need_to_save = False
# See if the exact address appears in any other vhost
# Remember 1.1.1.1:* == 1.1.1.1 -> hence any()
for addr in vhost.addrs:
# In Apache 2.2, when a NameVirtualHost directive is not
# set, "*" and "_default_" will conflict when sharing a port
addrs = set((addr,))
if addr.get_addr() in ("*", "_default_"):
addrs.update(obj.Addr((a, addr.get_port(),))
for a in ("*", "_default_"))
for test_vh in self.vhosts:
if (vhost.filep != test_vh.filep and
any(test_addr in addrs for
test_addr in test_vh.addrs) and
not self.is_name_vhost(addr)):
self.add_name_vhost(addr)
logger.info("Enabling NameVirtualHosts on %s", addr)
need_to_save = True
break
if need_to_save:
self.save()
def find_vhost_by_id(self, id_str):
"""
Searches through VirtualHosts and tries to match the id in a comment
:param str id_str: Id string for matching
:returns: The matched VirtualHost or None
:rtype: :class:`~certbot_apache.obj.VirtualHost` or None
:raises .errors.PluginError: If no VirtualHost is found
"""
for vh in self.vhosts:
if self._find_vhost_id(vh) == id_str:
return vh
msg = "No VirtualHost with ID {} was found.".format(id_str)
logger.warning(msg)
raise errors.PluginError(msg)
def _find_vhost_id(self, vhost):
"""Tries to find the unique ID from the VirtualHost comments. This is
used for keeping track of VirtualHost directive over time.
:param vhost: Virtual host to add the id
:type vhost: :class:`~certbot_apache.obj.VirtualHost`
:returns: The unique ID or None
:rtype: str or None
"""
# Strip the {} off from the format string
search_comment = constants.MANAGED_COMMENT_ID.format("")
id_comment = self.parser.find_comments(search_comment, vhost.path)
if id_comment:
# Use the first value, multiple ones shouldn't exist
comment = self.parser.get_arg(id_comment[0])
return comment.split(" ")[-1]
return None
def add_vhost_id(self, vhost):
"""Adds an unique ID to the VirtualHost as a comment for mapping back
to it on later invocations, as the config file order might have changed.
If ID already exists, returns that instead.
:param vhost: Virtual host to add or find the id
:type vhost: :class:`~certbot_apache.obj.VirtualHost`
:returns: The unique ID for vhost
:rtype: str or None
"""
vh_id = self._find_vhost_id(vhost)
if vh_id:
return vh_id
id_string = apache_util.unique_id()
comment = constants.MANAGED_COMMENT_ID.format(id_string)
self.parser.add_comment(vhost.path, comment)
return id_string
def _escape(self, fp):
fp = fp.replace(",", "\\,")
fp = fp.replace("[", "\\[")
fp = fp.replace("]", "\\]")
fp = fp.replace("|", "\\|")
fp = fp.replace("=", "\\=")
fp = fp.replace("(", "\\(")
fp = fp.replace(")", "\\)")
fp = fp.replace("!", "\\!")
return fp
######################################################################
# Enhancements
######################################################################
def supported_enhancements(self): # pylint: disable=no-self-use
"""Returns currently supported enhancements."""
return ["redirect", "ensure-http-header", "staple-ocsp"]
def enhance(self, domain, enhancement, options=None):
"""Enhance configuration.
:param str domain: domain to enhance
:param str enhancement: enhancement type defined in
:const:`~certbot.constants.ENHANCEMENTS`
:param options: options for the enhancement
See :const:`~certbot.constants.ENHANCEMENTS`
documentation for appropriate parameter.
:raises .errors.PluginError: If Enhancement is not supported, or if
there is any other problem with the enhancement.
"""
try:
func = self._enhance_func[enhancement]
except KeyError:
raise errors.PluginError(
"Unsupported enhancement: {0}".format(enhancement))
matched_vhosts = self.choose_vhosts(domain, create_if_no_ssl=False)
# We should be handling only SSL vhosts for enhancements
vhosts = [vhost for vhost in matched_vhosts if vhost.ssl]
if not vhosts:
msg_tmpl = ("Certbot was not able to find SSL VirtualHost for a "
"domain {0} for enabling enhancement \"{1}\". The requested "
"enhancement was not configured.")
msg_enhancement = enhancement
if options:
msg_enhancement += ": " + options
msg = msg_tmpl.format(domain, msg_enhancement)
logger.warning(msg)
raise errors.PluginError(msg)
try:
for vhost in vhosts:
func(vhost, options)
except errors.PluginError:
logger.warning("Failed %s for %s", enhancement, domain)
raise
def _autohsts_increase(self, vhost, id_str, nextstep):
"""Increase the AutoHSTS max-age value
:param vhost: Virtual host object to modify
:type vhost: :class:`~certbot_apache.obj.VirtualHost`
:param str id_str: The unique ID string of VirtualHost
:param int nextstep: Next AutoHSTS max-age value index
"""
nextstep_value = constants.AUTOHSTS_STEPS[nextstep]
self._autohsts_write(vhost, nextstep_value)
self._autohsts[id_str] = {"laststep": nextstep, "timestamp": time.time()}
def _autohsts_write(self, vhost, nextstep_value):
"""
Write the new HSTS max-age value to the VirtualHost file
"""
hsts_dirpath = None
header_path = self.parser.find_dir("Header", None, vhost.path)
if header_path:
pat = '(?:[ "]|^)(strict-transport-security)(?:[ "]|$)'
for match in header_path:
if re.search(pat, self.parser.aug.get(match).lower()):
hsts_dirpath = match
if not hsts_dirpath:
err_msg = ("Certbot was unable to find the existing HSTS header "
"from the VirtualHost at path {0}.").format(vhost.filep)
raise errors.PluginError(err_msg)
# Prepare the HSTS header value
hsts_maxage = "\"max-age={0}\"".format(nextstep_value)
# Update the header
# Our match statement was for string strict-transport-security, but
# we need to update the value instead. The next index is for the value
hsts_dirpath = hsts_dirpath.replace("arg[3]", "arg[4]")
self.parser.aug.set(hsts_dirpath, hsts_maxage)
note_msg = ("Increasing HSTS max-age value to {0} for VirtualHost "
"in {1}\n".format(nextstep_value, vhost.filep))
logger.debug(note_msg)
self.save_notes += note_msg
self.save(note_msg)
def _autohsts_fetch_state(self):
"""
Populates the AutoHSTS state from the pluginstorage
"""
try:
self._autohsts = self.storage.fetch("autohsts")
except KeyError:
self._autohsts = dict()
def _autohsts_save_state(self):
"""
Saves the state of AutoHSTS object to pluginstorage
"""
self.storage.put("autohsts", self._autohsts)
self.storage.save()
def _autohsts_vhost_in_lineage(self, vhost, lineage):
"""
Searches AutoHSTS managed VirtualHosts that belong to the lineage.
Matches the private key path.
"""
return bool(
self.parser.find_dir("SSLCertificateKeyFile",
lineage.key_path, vhost.path))
def _enable_ocsp_stapling(self, ssl_vhost, unused_options):
"""Enables OCSP Stapling
In OCSP, each client (e.g. browser) would have to query the
OCSP Responder to validate that the site certificate was not revoked.
Enabling OCSP Stapling, would allow the web-server to query the OCSP
Responder, and staple its response to the offered certificate during
TLS. i.e. clients would not have to query the OCSP responder.
OCSP Stapling enablement on Apache implicitly depends on
SSLCertificateChainFile being set by other code.
.. note:: This function saves the configuration
:param ssl_vhost: Destination of traffic, an ssl enabled vhost
:type ssl_vhost: :class:`~certbot_apache.obj.VirtualHost`
:param unused_options: Not currently used
:type unused_options: Not Available
:returns: Success, general_vhost (HTTP vhost)
:rtype: (bool, :class:`~certbot_apache.obj.VirtualHost`)
"""
min_apache_ver = (2, 3, 3)
if self.get_version() < min_apache_ver:
raise errors.PluginError(
"Unable to set OCSP directives.\n"
"Apache version is below 2.3.3.")
if "socache_shmcb_module" not in self.parser.modules:
self.enable_mod("socache_shmcb")
# Check if there's an existing SSLUseStapling directive on.
use_stapling_aug_path = self.parser.find_dir("SSLUseStapling",
"on", start=ssl_vhost.path)
if not use_stapling_aug_path:
self.parser.add_dir(ssl_vhost.path, "SSLUseStapling", "on")
ssl_vhost_aug_path = self._escape(parser.get_aug_path(ssl_vhost.filep))
# Check if there's an existing SSLStaplingCache directive.
stapling_cache_aug_path = self.parser.find_dir('SSLStaplingCache',
None, ssl_vhost_aug_path)
# We'll simply delete the directive, so that we'll have a
# consistent OCSP cache path.
if stapling_cache_aug_path:
self.parser.aug.remove(
re.sub(r"/\w*$", "", stapling_cache_aug_path[0]))
self.parser.add_dir_to_ifmodssl(ssl_vhost_aug_path,
"SSLStaplingCache",
["shmcb:/var/run/apache2/stapling_cache(128000)"])
msg = "OCSP Stapling was enabled on SSL Vhost: %s.\n"%(
ssl_vhost.filep)
self.save_notes += msg
self.save()
logger.info(msg)
def _set_http_header(self, ssl_vhost, header_substring):
"""Enables header that is identified by header_substring on ssl_vhost.
If the header identified by header_substring is not already set,
a new Header directive is placed in ssl_vhost's configuration with
arguments from: constants.HTTP_HEADER[header_substring]
.. note:: This function saves the configuration
:param ssl_vhost: Destination of traffic, an ssl enabled vhost
:type ssl_vhost: :class:`~certbot_apache.obj.VirtualHost`
:param header_substring: string that uniquely identifies a header.
e.g: Strict-Transport-Security, Upgrade-Insecure-Requests.
:type str
:returns: Success, general_vhost (HTTP vhost)
:rtype: (bool, :class:`~certbot_apache.obj.VirtualHost`)
:raises .errors.PluginError: If no viable HTTP host can be created or
set with header header_substring.
"""
if "headers_module" not in self.parser.modules:
self.enable_mod("headers")
# Check if selected header is already set
self._verify_no_matching_http_header(ssl_vhost, header_substring)
# Add directives to server
self.parser.add_dir(ssl_vhost.path, "Header",
constants.HEADER_ARGS[header_substring])
self.save_notes += ("Adding %s header to ssl vhost in %s\n" %
(header_substring, ssl_vhost.filep))
self.save()
logger.info("Adding %s header to ssl vhost in %s", header_substring,
ssl_vhost.filep)
def _verify_no_matching_http_header(self, ssl_vhost, header_substring):
"""Checks to see if an there is an existing Header directive that
contains the string header_substring.
:param ssl_vhost: vhost to check
:type vhost: :class:`~certbot_apache.obj.VirtualHost`
:param header_substring: string that uniquely identifies a header.
e.g: Strict-Transport-Security, Upgrade-Insecure-Requests.
:type str
:returns: boolean
:rtype: (bool)
:raises errors.PluginEnhancementAlreadyPresent When header
header_substring exists
"""
header_path = self.parser.find_dir("Header", None,
start=ssl_vhost.path)
if header_path:
# "Existing Header directive for virtualhost"
pat = '(?:[ "]|^)(%s)(?:[ "]|$)' % (header_substring.lower())
for match in header_path:
if re.search(pat, self.parser.aug.get(match).lower()):
raise errors.PluginEnhancementAlreadyPresent(
"Existing %s header" % (header_substring))
def _enable_redirect(self, ssl_vhost, unused_options):
"""Redirect all equivalent HTTP traffic to ssl_vhost.
.. todo:: This enhancement should be rewritten and will
unfortunately require lots of debugging by hand.
Adds Redirect directive to the port 80 equivalent of ssl_vhost
First the function attempts to find the vhost with equivalent
ip addresses that serves on non-ssl ports
The function then adds the directive
.. note:: This function saves the configuration
:param ssl_vhost: Destination of traffic, an ssl enabled vhost
:type ssl_vhost: :class:`~certbot_apache.obj.VirtualHost`
:param unused_options: Not currently used
:type unused_options: Not Available
:raises .errors.PluginError: If no viable HTTP host can be created or
used for the redirect.
"""
if "rewrite_module" not in self.parser.modules:
self.enable_mod("rewrite")
general_vh = self._get_http_vhost(ssl_vhost)
if general_vh is None:
# Add virtual_server with redirect
logger.debug("Did not find http version of ssl virtual host "
"attempting to create")
redirect_addrs = self._get_proposed_addrs(ssl_vhost)
for vhost in self.vhosts:
if vhost.enabled and vhost.conflicts(redirect_addrs):
raise errors.PluginError(
"Unable to find corresponding HTTP vhost; "
"Unable to create one as intended addresses conflict; "
"Current configuration does not support automated "
"redirection")
self._create_redirect_vhost(ssl_vhost)
else:
if general_vh in self._enhanced_vhosts["redirect"]:
logger.debug("Already enabled redirect for this vhost")
return
# Check if Certbot redirection already exists
self._verify_no_certbot_redirect(general_vh)
# Note: if code flow gets here it means we didn't find the exact
# certbot RewriteRule config for redirection. Finding
# another RewriteRule is likely to be fine in most or all cases,
# but redirect loops are possible in very obscure cases; see #1620
# for reasoning.
if self._is_rewrite_exists(general_vh):
logger.warning("Added an HTTP->HTTPS rewrite in addition to "
"other RewriteRules; you may wish to check for "
"overall consistency.")
# Add directives to server
# Note: These are not immediately searchable in sites-enabled
# even with save() and load()
if not self._is_rewrite_engine_on(general_vh):
self.parser.add_dir(general_vh.path, "RewriteEngine", "on")
names = ssl_vhost.get_names()
for idx, name in enumerate(names):
args = ["%{SERVER_NAME}", "={0}".format(name), "[OR]"]
if idx == len(names) - 1:
args.pop()
self.parser.add_dir(general_vh.path, "RewriteCond", args)
self._set_https_redirection_rewrite_rule(general_vh)
self.save_notes += ("Redirecting host in %s to ssl vhost in %s\n" %
(general_vh.filep, ssl_vhost.filep))
self.save()
self._enhanced_vhosts["redirect"].add(general_vh)
logger.info("Redirecting vhost in %s to ssl vhost in %s",
general_vh.filep, ssl_vhost.filep)
def _set_https_redirection_rewrite_rule(self, vhost):
if self.get_version() >= (2, 3, 9):
self.parser.add_dir(vhost.path, "RewriteRule",
constants.REWRITE_HTTPS_ARGS_WITH_END)
else:
self.parser.add_dir(vhost.path, "RewriteRule",
constants.REWRITE_HTTPS_ARGS)
def _verify_no_certbot_redirect(self, vhost):
"""Checks to see if a redirect was already installed by certbot.
Checks to see if virtualhost already contains a rewrite rule that is
identical to Certbot's redirection rewrite rule.
For graceful transition to new rewrite rules for HTTPS redireciton we
delete certbot's old rewrite rules and set the new one instead.
:param vhost: vhost to check
:type vhost: :class:`~certbot_apache.obj.VirtualHost`
:raises errors.PluginEnhancementAlreadyPresent: When the exact
certbot redirection WriteRule exists in virtual host.
"""
rewrite_path = self.parser.find_dir(
"RewriteRule", None, start=vhost.path)
# There can be other RewriteRule directive lines in vhost config.
# rewrite_args_dict keys are directive ids and the corresponding value
# for each is a list of arguments to that directive.
rewrite_args_dict = defaultdict(list) # type: DefaultDict[str, List[str]]
pat = r'(.*directive\[\d+\]).*'
for match in rewrite_path:
m = re.match(pat, match)
if m:
dir_path = m.group(1)
rewrite_args_dict[dir_path].append(match)
if rewrite_args_dict:
redirect_args = [constants.REWRITE_HTTPS_ARGS,
constants.REWRITE_HTTPS_ARGS_WITH_END]
for dir_path, args_paths in rewrite_args_dict.items():
arg_vals = [self.parser.aug.get(x) for x in args_paths]
# Search for past redirection rule, delete it, set the new one
if arg_vals in constants.OLD_REWRITE_HTTPS_ARGS:
self.parser.aug.remove(dir_path)
self._set_https_redirection_rewrite_rule(vhost)
self.save()
raise errors.PluginEnhancementAlreadyPresent(
"Certbot has already enabled redirection")
if arg_vals in redirect_args:
raise errors.PluginEnhancementAlreadyPresent(
"Certbot has already enabled redirection")
def _is_rewrite_exists(self, vhost):
"""Checks if there exists a RewriteRule directive in vhost
:param vhost: vhost to check
:type vhost: :class:`~certbot_apache.obj.VirtualHost`
:returns: True if a RewriteRule directive exists.
:rtype: bool
"""
rewrite_path = self.parser.find_dir(
"RewriteRule", None, start=vhost.path)
return bool(rewrite_path)
def _is_rewrite_engine_on(self, vhost):
"""Checks if a RewriteEngine directive is on
:param vhost: vhost to check
:type vhost: :class:`~certbot_apache.obj.VirtualHost`
"""
rewrite_engine_path_list = self.parser.find_dir("RewriteEngine", "on",
start=vhost.path)
if rewrite_engine_path_list:
for re_path in rewrite_engine_path_list:
# A RewriteEngine directive may also be included in per
# directory .htaccess files. We only care about the VirtualHost.
if 'virtualhost' in re_path.lower():
return self.parser.get_arg(re_path)
return False
def _create_redirect_vhost(self, ssl_vhost):
"""Creates an http_vhost specifically to redirect for the ssl_vhost.
:param ssl_vhost: ssl vhost
:type ssl_vhost: :class:`~certbot_apache.obj.VirtualHost`
:returns: tuple of the form
(`success`, :class:`~certbot_apache.obj.VirtualHost`)
:rtype: tuple
"""
text = self._get_redirect_config_str(ssl_vhost)
redirect_filepath = self._write_out_redirect(ssl_vhost, text)
self.parser.aug.load()
# Make a new vhost data structure and add it to the lists
new_vhost = self._create_vhost(parser.get_aug_path(self._escape(redirect_filepath)))
self.vhosts.append(new_vhost)
self._enhanced_vhosts["redirect"].add(new_vhost)
# Finally create documentation for the change
self.save_notes += ("Created a port 80 vhost, %s, for redirection to "
"ssl vhost %s\n" %
(new_vhost.filep, ssl_vhost.filep))
def _get_redirect_config_str(self, ssl_vhost):
# get servernames and serveraliases
serveralias = ""
servername = ""
if ssl_vhost.name is not None:
servername = "ServerName " + ssl_vhost.name
if ssl_vhost.aliases:
serveralias = "ServerAlias " + " ".join(ssl_vhost.aliases)
rewrite_rule_args = [] # type: List[str]
if self.get_version() >= (2, 3, 9):
rewrite_rule_args = constants.REWRITE_HTTPS_ARGS_WITH_END
else:
rewrite_rule_args = constants.REWRITE_HTTPS_ARGS
return ("\n"
"%s \n"
"%s \n"
"ServerSignature Off\n"
"\n"
"RewriteEngine On\n"
"RewriteRule %s\n"
"\n"
"ErrorLog %s/redirect.error.log\n"
"LogLevel warn\n"
"\n"
% (" ".join(str(addr) for
addr in self._get_proposed_addrs(ssl_vhost)),
servername, serveralias,
" ".join(rewrite_rule_args),
self.option("logs_root")))
def _write_out_redirect(self, ssl_vhost, text):
# This is the default name
redirect_filename = "le-redirect.conf"
# See if a more appropriate name can be applied
if ssl_vhost.name is not None:
# make sure servername doesn't exceed filename length restriction
if len(ssl_vhost.name) < (255 - (len(redirect_filename) + 1)):
redirect_filename = "le-redirect-%s.conf" % ssl_vhost.name
redirect_filepath = os.path.join(self.option("vhost_root"),
redirect_filename)
# Register the new file that will be created
# Note: always register the creation before writing to ensure file will
# be removed in case of unexpected program exit
self.reverter.register_file_creation(False, redirect_filepath)
# Write out file
with open(redirect_filepath, "w") as redirect_file:
redirect_file.write(text)
# Add new include to configuration if it doesn't exist yet
if not self.parser.parsed_in_current(redirect_filepath):
self.parser.parse_file(redirect_filepath)
logger.info("Created redirect file: %s", redirect_filename)
return redirect_filepath
def _get_http_vhost(self, ssl_vhost):
"""Find appropriate HTTP vhost for ssl_vhost."""
# First candidate vhosts filter
if ssl_vhost.ancestor:
return ssl_vhost.ancestor
candidate_http_vhs = [
vhost for vhost in self.vhosts if not vhost.ssl
]
# Second filter - check addresses
for http_vh in candidate_http_vhs:
if http_vh.same_server(ssl_vhost):
return http_vh
# Third filter - if none with same names, return generic
for http_vh in candidate_http_vhs:
if http_vh.same_server(ssl_vhost, generic=True):
return http_vh
return None
def _get_proposed_addrs(self, vhost, port="80"):
"""Return all addrs of vhost with the port replaced with the specified.
:param obj.VirtualHost ssl_vhost: Original Vhost
:param str port: Desired port for new addresses
:returns: `set` of :class:`~obj.Addr`
"""
redirects = set()
for addr in vhost.addrs:
redirects.add(addr.get_addr_obj(port))
return redirects
def enable_site(self, vhost):
"""Enables an available site, Apache reload required.
.. note:: Does not make sure that the site correctly works or that all
modules are enabled appropriately.
.. note:: The distribution specific override replaces functionality
of this method where available.
:param vhost: vhost to enable
:type vhost: :class:`~certbot_apache.obj.VirtualHost`
:raises .errors.NotSupportedError: If filesystem layout is not
supported.
"""
if vhost.enabled:
return
if not self.parser.parsed_in_original(vhost.filep):
# Add direct include to root conf
logger.info("Enabling site %s by adding Include to root configuration",
vhost.filep)
self.save_notes += "Enabled site %s\n" % vhost.filep
self.parser.add_include(self.parser.loc["default"], vhost.filep)
vhost.enabled = True
return
def enable_mod(self, mod_name, temp=False): # pylint: disable=unused-argument
"""Enables module in Apache.
Both enables and reloads Apache so module is active.
:param str mod_name: Name of the module to enable. (e.g. 'ssl')
:param bool temp: Whether or not this is a temporary action.
.. note:: The distribution specific override replaces functionality
of this method where available.
:raises .errors.MisconfigurationError: We cannot enable modules in
generic fashion.
"""
mod_message = ("Apache needs to have module \"{0}\" active for the " +
"requested installation options. Unfortunately Certbot is unable " +
"to install or enable it for you. Please install the module, and " +
"run Certbot again.")
raise errors.MisconfigurationError(mod_message.format(mod_name))
def restart(self):
"""Runs a config test and reloads the Apache server.
:raises .errors.MisconfigurationError: If either the config test
or reload fails.
"""
self.config_test()
self._reload()
def _reload(self):
"""Reloads the Apache server.
:raises .errors.MisconfigurationError: If reload fails
"""
try:
util.run_script(self.option("restart_cmd"))
except errors.SubprocessError as err:
logger.info("Unable to restart apache using %s",
self.option("restart_cmd"))
alt_restart = self.option("restart_cmd_alt")
if alt_restart:
logger.debug("Trying alternative restart command: %s",
alt_restart)
# There is an alternative restart command available
# This usually is "restart" verb while original is "graceful"
try:
util.run_script(self.option(
"restart_cmd_alt"))
return
except errors.SubprocessError as secerr:
error = str(secerr)
else:
error = str(err)
raise errors.MisconfigurationError(error)
def config_test(self): # pylint: disable=no-self-use
"""Check the configuration of Apache for errors.
:raises .errors.MisconfigurationError: If config_test fails
"""
try:
util.run_script(self.option("conftest_cmd"))
except errors.SubprocessError as err:
raise errors.MisconfigurationError(str(err))
def get_version(self):
"""Return version of Apache Server.
Version is returned as tuple. (ie. 2.4.7 = (2, 4, 7))
:returns: version
:rtype: tuple
:raises .PluginError: if unable to find Apache version
"""
try:
stdout, _ = util.run_script(self.option("version_cmd"))
except errors.SubprocessError:
raise errors.PluginError(
"Unable to run %s -v" %
self.option("version_cmd"))
regex = re.compile(r"Apache/([0-9\.]*)", re.IGNORECASE)
matches = regex.findall(stdout)
if len(matches) != 1:
raise errors.PluginError("Unable to find Apache version")
return tuple([int(i) for i in matches[0].split(".")])
def more_info(self):
"""Human-readable string to help understand the module"""
return (
"Configures Apache to authenticate and install HTTPS.{0}"
"Server root: {root}{0}"
"Version: {version}".format(
os.linesep, root=self.parser.loc["root"],
version=".".join(str(i) for i in self.version))
)
###########################################################################
# Challenges Section
###########################################################################
def get_chall_pref(self, unused_domain): # pylint: disable=no-self-use
"""Return list of challenge preferences."""
return [challenges.HTTP01]
def perform(self, achalls):
"""Perform the configuration related challenge.
This function currently assumes all challenges will be fulfilled.
If this turns out not to be the case in the future. Cleanup and
outstanding challenges will have to be designed better.
"""
self._chall_out.update(achalls)
responses = [None] * len(achalls)
http_doer = http_01.ApacheHttp01(self)
for i, achall in enumerate(achalls):
# Currently also have chall_doer hold associated index of the
# challenge. This helps to put all of the responses back together
# when they are all complete.
http_doer.add_chall(achall, i)
http_response = http_doer.perform()
if http_response:
# Must reload in order to activate the challenges.
# Handled here because we may be able to load up other challenge
# types
self.restart()
# TODO: Remove this dirty hack. We need to determine a reliable way
# of identifying when the new configuration is being used.
time.sleep(3)
self._update_responses(responses, http_response, http_doer)
return responses
def _update_responses(self, responses, chall_response, chall_doer):
# Go through all of the challenges and assign them to the proper
# place in the responses return value. All responses must be in the
# same order as the original challenges.
for i, resp in enumerate(chall_response):
responses[chall_doer.indices[i]] = resp
def cleanup(self, achalls):
"""Revert all challenges."""
self._chall_out.difference_update(achalls)
# If all of the challenges have been finished, clean up everything
if not self._chall_out:
self.revert_challenge_config()
self.restart()
self.parser.reset_modules()
def install_ssl_options_conf(self, options_ssl, options_ssl_digest):
"""Copy Certbot's SSL options file into the system's config dir if required."""
# XXX if we ever try to enforce a local privilege boundary (eg, running
# certbot for unprivileged users via setuid), this function will need
# to be modified.
return common.install_version_controlled_file(options_ssl, options_ssl_digest,
self.option("MOD_SSL_CONF_SRC"), constants.ALL_SSL_OPTIONS_HASHES)
def enable_autohsts(self, _unused_lineage, domains):
"""
Enable the AutoHSTS enhancement for defined domains
:param _unused_lineage: Certificate lineage object, unused
:type _unused_lineage: certbot.storage.RenewableCert
:param domains: List of domains in certificate to enhance
:type domains: str
"""
self._autohsts_fetch_state()
_enhanced_vhosts = []
for d in domains:
matched_vhosts = self.choose_vhosts(d, create_if_no_ssl=False)
# We should be handling only SSL vhosts for AutoHSTS
vhosts = [vhost for vhost in matched_vhosts if vhost.ssl]
if not vhosts:
msg_tmpl = ("Certbot was not able to find SSL VirtualHost for a "
"domain {0} for enabling AutoHSTS enhancement.")
msg = msg_tmpl.format(d)
logger.warning(msg)
raise errors.PluginError(msg)
for vh in vhosts:
try:
self._enable_autohsts_domain(vh)
_enhanced_vhosts.append(vh)
except errors.PluginEnhancementAlreadyPresent:
if vh in _enhanced_vhosts:
continue
msg = ("VirtualHost for domain {0} in file {1} has a " +
"String-Transport-Security header present, exiting.")
raise errors.PluginEnhancementAlreadyPresent(
msg.format(d, vh.filep))
if _enhanced_vhosts:
note_msg = "Enabling AutoHSTS"
self.save(note_msg)
logger.info(note_msg)
self.restart()
# Save the current state to pluginstorage
self._autohsts_save_state()
def _enable_autohsts_domain(self, ssl_vhost):
"""Do the initial AutoHSTS deployment to a vhost
:param ssl_vhost: The VirtualHost object to deploy the AutoHSTS
:type ssl_vhost: :class:`~certbot_apache.obj.VirtualHost` or None
:raises errors.PluginEnhancementAlreadyPresent: When already enhanced
"""
# This raises the exception
self._verify_no_matching_http_header(ssl_vhost,
"Strict-Transport-Security")
if "headers_module" not in self.parser.modules:
self.enable_mod("headers")
# Prepare the HSTS header value
hsts_header = constants.HEADER_ARGS["Strict-Transport-Security"][:-1]
initial_maxage = constants.AUTOHSTS_STEPS[0]
hsts_header.append("\"max-age={0}\"".format(initial_maxage))
# Add ID to the VirtualHost for mapping back to it later
uniq_id = self.add_vhost_id(ssl_vhost)
self.save_notes += "Adding unique ID {0} to VirtualHost in {1}\n".format(
uniq_id, ssl_vhost.filep)
# Add the actual HSTS header
self.parser.add_dir(ssl_vhost.path, "Header", hsts_header)
note_msg = ("Adding gradually increasing HSTS header with initial value "
"of {0} to VirtualHost in {1}\n".format(
initial_maxage, ssl_vhost.filep))
self.save_notes += note_msg
# Save the current state to pluginstorage
self._autohsts[uniq_id] = {"laststep": 0, "timestamp": time.time()}
def update_autohsts(self, _unused_domain):
"""
Increase the AutoHSTS values of VirtualHosts that the user has enabled
this enhancement for.
:param _unused_domain: Not currently used
:type _unused_domain: Not Available
"""
self._autohsts_fetch_state()
if not self._autohsts:
# No AutoHSTS enabled for any domain
return
curtime = time.time()
save_and_restart = False
for id_str, config in list(self._autohsts.items()):
if config["timestamp"] + constants.AUTOHSTS_FREQ > curtime:
# Skip if last increase was < AUTOHSTS_FREQ ago
continue
nextstep = config["laststep"] + 1
if nextstep < len(constants.AUTOHSTS_STEPS):
# If installer hasn't been prepared yet, do it now
if not self._prepared:
self.prepare()
# Have not reached the max value yet
try:
vhost = self.find_vhost_by_id(id_str)
except errors.PluginError:
msg = ("Could not find VirtualHost with ID {0}, disabling "
"AutoHSTS for this VirtualHost").format(id_str)
logger.warning(msg)
# Remove the orphaned AutoHSTS entry from pluginstorage
self._autohsts.pop(id_str)
continue
self._autohsts_increase(vhost, id_str, nextstep)
msg = ("Increasing HSTS max-age value for VirtualHost with id "
"{0}").format(id_str)
self.save_notes += msg
save_and_restart = True
if save_and_restart:
self.save("Increased HSTS max-age values")
self.restart()
self._autohsts_save_state()
def deploy_autohsts(self, lineage):
"""
Checks if autohsts vhost has reached maximum auto-increased value
and changes the HSTS max-age to a high value.
:param lineage: Certificate lineage object
:type lineage: certbot.storage.RenewableCert
"""
self._autohsts_fetch_state()
if not self._autohsts:
# No autohsts enabled for any vhost
return
vhosts = []
affected_ids = []
# Copy, as we are removing from the dict inside the loop
for id_str, config in list(self._autohsts.items()):
if config["laststep"]+1 >= len(constants.AUTOHSTS_STEPS):
# max value reached, try to make permanent
try:
vhost = self.find_vhost_by_id(id_str)
except errors.PluginError:
msg = ("VirtualHost with id {} was not found, unable to "
"make HSTS max-age permanent.").format(id_str)
logger.warning(msg)
self._autohsts.pop(id_str)
continue
if self._autohsts_vhost_in_lineage(vhost, lineage):
vhosts.append(vhost)
affected_ids.append(id_str)
save_and_restart = False
for vhost in vhosts:
self._autohsts_write(vhost, constants.AUTOHSTS_PERMANENT)
msg = ("Strict-Transport-Security max-age value for "
"VirtualHost in {0} was made permanent.").format(vhost.filep)
logger.debug(msg)
self.save_notes += msg+"\n"
save_and_restart = True
if save_and_restart:
self.save("Made HSTS max-age permanent")
self.restart()
for id_str in affected_ids:
self._autohsts.pop(id_str)
# Update AutoHSTS storage (We potentially removed vhosts from managed)
self._autohsts_save_state()
AutoHSTSEnhancement.register(ApacheConfigurator) # pylint: disable=no-member
certbot-apache-0.39.0/certbot_apache/entrypoint.py 0000644 0001750 0001750 00000005003 13544726630 022414 0 ustar erica erica 0000000 0000000 """ Entry point for Apache Plugin """
# Pylint does not like disutils.version when running inside a venv.
# See: https://github.com/PyCQA/pylint/issues/73
from distutils.version import LooseVersion # pylint: disable=no-name-in-module,import-error
from certbot import util
from certbot_apache import configurator
from certbot_apache import override_arch
from certbot_apache import override_fedora
from certbot_apache import override_darwin
from certbot_apache import override_debian
from certbot_apache import override_centos
from certbot_apache import override_gentoo
from certbot_apache import override_suse
OVERRIDE_CLASSES = {
"arch": override_arch.ArchConfigurator,
"darwin": override_darwin.DarwinConfigurator,
"debian": override_debian.DebianConfigurator,
"ubuntu": override_debian.DebianConfigurator,
"centos": override_centos.CentOSConfigurator,
"centos linux": override_centos.CentOSConfigurator,
"fedora_old": override_centos.CentOSConfigurator,
"fedora": override_fedora.FedoraConfigurator,
"ol": override_centos.CentOSConfigurator,
"redhatenterpriseserver": override_centos.CentOSConfigurator,
"red hat enterprise linux server": override_centos.CentOSConfigurator,
"rhel": override_centos.CentOSConfigurator,
"amazon": override_centos.CentOSConfigurator,
"gentoo": override_gentoo.GentooConfigurator,
"gentoo base system": override_gentoo.GentooConfigurator,
"opensuse": override_suse.OpenSUSEConfigurator,
"suse": override_suse.OpenSUSEConfigurator,
"scientific": override_centos.CentOSConfigurator,
"scientific linux": override_centos.CentOSConfigurator,
}
def get_configurator():
""" Get correct configurator class based on the OS fingerprint """
os_name, os_version = util.get_os_info()
os_name = os_name.lower()
override_class = None
# Special case for older Fedora versions
if os_name == 'fedora' and LooseVersion(os_version) < LooseVersion('29'):
os_name = 'fedora_old'
try:
override_class = OVERRIDE_CLASSES[os_name]
except KeyError:
# OS not found in the list
os_like = util.get_systemd_os_like()
if os_like:
for os_name in os_like:
if os_name in OVERRIDE_CLASSES.keys():
override_class = OVERRIDE_CLASSES[os_name]
if not override_class:
# No override class found, return the generic configurator
override_class = configurator.ApacheConfigurator
return override_class
ENTRYPOINT = get_configurator()
certbot-apache-0.39.0/certbot_apache/override_suse.py 0000644 0001750 0001750 00000001763 13544726630 023070 0 ustar erica erica 0000000 0000000 """ Distribution specific override class for OpenSUSE """
import pkg_resources
import zope.interface
from certbot import interfaces
from certbot_apache import configurator
@zope.interface.provider(interfaces.IPluginFactory)
class OpenSUSEConfigurator(configurator.ApacheConfigurator):
"""OpenSUSE specific ApacheConfigurator override class"""
OS_DEFAULTS = dict(
server_root="/etc/apache2",
vhost_root="/etc/apache2/vhosts.d",
vhost_files="*.conf",
logs_root="/var/log/apache2",
ctl="apache2ctl",
version_cmd=['apache2ctl', '-v'],
restart_cmd=['apache2ctl', 'graceful'],
conftest_cmd=['apache2ctl', 'configtest'],
enmod="a2enmod",
dismod="a2dismod",
le_vhost_ext="-le-ssl.conf",
handle_modules=False,
handle_sites=False,
challenge_location="/etc/apache2/vhosts.d",
MOD_SSL_CONF_SRC=pkg_resources.resource_filename(
"certbot_apache", "options-ssl-apache.conf")
)
certbot-apache-0.39.0/certbot_apache/http_01.py 0000644 0001750 0001750 00000017504 13544726630 021471 0 ustar erica erica 0000000 0000000 """A class that performs HTTP-01 challenges for Apache"""
import logging
from acme.magic_typing import List, Set # pylint: disable=unused-import, no-name-in-module
from certbot import errors
from certbot.compat import os
from certbot.compat import filesystem
from certbot.plugins import common
from certbot_apache.obj import VirtualHost # pylint: disable=unused-import
from certbot_apache.parser import get_aug_path
logger = logging.getLogger(__name__)
class ApacheHttp01(common.TLSSNI01):
"""Class that performs HTTP-01 challenges within the Apache configurator."""
CONFIG_TEMPLATE22_PRE = """\
RewriteEngine on
RewriteRule ^/\\.well-known/acme-challenge/([A-Za-z0-9-_=]+)$ {0}/$1 [L]
"""
CONFIG_TEMPLATE22_POST = """\
Order Allow,Deny
Allow from all
Order Allow,Deny
Allow from all
"""
CONFIG_TEMPLATE24_PRE = """\
RewriteEngine on
RewriteRule ^/\\.well-known/acme-challenge/([A-Za-z0-9-_=]+)$ {0}/$1 [END]
"""
CONFIG_TEMPLATE24_POST = """\
Require all granted
Require all granted
"""
def __init__(self, *args, **kwargs):
super(ApacheHttp01, self).__init__(*args, **kwargs)
self.challenge_conf_pre = os.path.join(
self.configurator.conf("challenge-location"),
"le_http_01_challenge_pre.conf")
self.challenge_conf_post = os.path.join(
self.configurator.conf("challenge-location"),
"le_http_01_challenge_post.conf")
self.challenge_dir = os.path.join(
self.configurator.config.work_dir,
"http_challenges")
self.moded_vhosts = set() # type: Set[VirtualHost]
def perform(self):
"""Perform all HTTP-01 challenges."""
if not self.achalls:
return []
# Save any changes to the configuration as a precaution
# About to make temporary changes to the config
self.configurator.save("Changes before challenge setup", True)
self.configurator.ensure_listen(str(
self.configurator.config.http01_port))
self.prepare_http01_modules()
responses = self._set_up_challenges()
self._mod_config()
# Save reversible changes
self.configurator.save("HTTP Challenge", True)
return responses
def prepare_http01_modules(self):
"""Make sure that we have the needed modules available for http01"""
if self.configurator.conf("handle-modules"):
needed_modules = ["rewrite"]
if self.configurator.version < (2, 4):
needed_modules.append("authz_host")
else:
needed_modules.append("authz_core")
for mod in needed_modules:
if mod + "_module" not in self.configurator.parser.modules:
self.configurator.enable_mod(mod, temp=True)
def _mod_config(self):
selected_vhosts = [] # type: List[VirtualHost]
http_port = str(self.configurator.config.http01_port)
for chall in self.achalls:
# Search for matching VirtualHosts
for vh in self._matching_vhosts(chall.domain):
selected_vhosts.append(vh)
# Ensure that we have one or more VirtualHosts that we can continue
# with. (one that listens to port configured with --http-01-port)
found = False
for vhost in selected_vhosts:
if any(a.is_wildcard() or a.get_port() == http_port for a in vhost.addrs):
found = True
if not found:
for vh in self._relevant_vhosts():
selected_vhosts.append(vh)
# Add the challenge configuration
for vh in selected_vhosts:
self._set_up_include_directives(vh)
self.configurator.reverter.register_file_creation(
True, self.challenge_conf_pre)
self.configurator.reverter.register_file_creation(
True, self.challenge_conf_post)
if self.configurator.version < (2, 4):
config_template_pre = self.CONFIG_TEMPLATE22_PRE
config_template_post = self.CONFIG_TEMPLATE22_POST
else:
config_template_pre = self.CONFIG_TEMPLATE24_PRE
config_template_post = self.CONFIG_TEMPLATE24_POST
config_text_pre = config_template_pre.format(self.challenge_dir)
config_text_post = config_template_post.format(self.challenge_dir)
logger.debug("writing a pre config file with text:\n %s", config_text_pre)
with open(self.challenge_conf_pre, "w") as new_conf:
new_conf.write(config_text_pre)
logger.debug("writing a post config file with text:\n %s", config_text_post)
with open(self.challenge_conf_post, "w") as new_conf:
new_conf.write(config_text_post)
def _matching_vhosts(self, domain):
"""Return all VirtualHost objects that have the requested domain name or
a wildcard name that would match the domain in ServerName or ServerAlias
directive.
"""
matching_vhosts = []
for vhost in self.configurator.vhosts:
if self.configurator.domain_in_names(vhost.get_names(), domain):
# domain_in_names also matches the exact names, so no need
# to check "domain in vhost.get_names()" explicitly here
matching_vhosts.append(vhost)
return matching_vhosts
def _relevant_vhosts(self):
http01_port = str(self.configurator.config.http01_port)
relevant_vhosts = []
for vhost in self.configurator.vhosts:
if any(a.is_wildcard() or a.get_port() == http01_port for a in vhost.addrs):
if not vhost.ssl:
relevant_vhosts.append(vhost)
if not relevant_vhosts:
raise errors.PluginError(
"Unable to find a virtual host listening on port {0} which is"
" currently needed for Certbot to prove to the CA that you"
" control your domain. Please add a virtual host for port"
" {0}.".format(http01_port))
return relevant_vhosts
def _set_up_challenges(self):
if not os.path.isdir(self.challenge_dir):
filesystem.makedirs(self.challenge_dir, 0o755)
responses = []
for achall in self.achalls:
responses.append(self._set_up_challenge(achall))
return responses
def _set_up_challenge(self, achall):
response, validation = achall.response_and_validation()
name = os.path.join(self.challenge_dir, achall.chall.encode("token"))
self.configurator.reverter.register_file_creation(True, name)
with open(name, 'wb') as f:
f.write(validation.encode())
filesystem.chmod(name, 0o644)
return response
def _set_up_include_directives(self, vhost):
"""Includes override configuration to the beginning and to the end of
VirtualHost. Note that this include isn't added to Augeas search tree"""
if vhost not in self.moded_vhosts:
logger.debug(
"Adding a temporary challenge validation Include for name: %s " +
"in: %s", vhost.name, vhost.filep)
self.configurator.parser.add_dir_beginning(
vhost.path, "Include", self.challenge_conf_pre)
self.configurator.parser.add_dir(
vhost.path, "Include", self.challenge_conf_post)
if not vhost.enabled:
self.configurator.parser.add_dir(
get_aug_path(self.configurator.parser.loc["default"]),
"Include", vhost.filep)
self.moded_vhosts.add(vhost)
certbot-apache-0.39.0/certbot_apache/obj.py 0000644 0001750 0001750 00000021710 13544726630 020756 0 ustar erica erica 0000000 0000000 """Module contains classes used by the Apache Configurator."""
import re
from acme.magic_typing import Set # pylint: disable=unused-import, no-name-in-module
from certbot.plugins import common
class Addr(common.Addr):
"""Represents an Apache address."""
def __eq__(self, other):
"""This is defined as equivalent within Apache.
ip_addr:* == ip_addr
"""
if isinstance(other, self.__class__):
return ((self.tup == other.tup) or
(self.tup[0] == other.tup[0] and
self.is_wildcard() and other.is_wildcard()))
return False
def __ne__(self, other):
return not self.__eq__(other)
def __repr__(self):
return "certbot_apache.obj.Addr(" + repr(self.tup) + ")"
def __hash__(self): # pylint: disable=useless-super-delegation
# Python 3 requires explicit overridden for __hash__ if __eq__ or
# __cmp__ is overridden. See https://bugs.python.org/issue2235
return super(Addr, self).__hash__()
def _addr_less_specific(self, addr):
"""Returns if addr.get_addr() is more specific than self.get_addr()."""
# pylint: disable=protected-access
return addr._rank_specific_addr() > self._rank_specific_addr()
def _rank_specific_addr(self):
"""Returns numerical rank for get_addr()
:returns: 2 - FQ, 1 - wildcard, 0 - _default_
:rtype: int
"""
if self.get_addr() == "_default_":
return 0
elif self.get_addr() == "*":
return 1
return 2
def conflicts(self, addr):
r"""Returns if address could conflict with correct function of self.
Could addr take away service provided by self within Apache?
.. note::IP Address is more important than wildcard.
Connection from 127.0.0.1:80 with choices of *:80 and 127.0.0.1:*
chooses 127.0.0.1:\*
.. todo:: Handle domain name addrs...
Examples:
========================================= =====
``127.0.0.1:\*.conflicts(127.0.0.1:443)`` True
``127.0.0.1:443.conflicts(127.0.0.1:\*)`` False
``\*:443.conflicts(\*:80)`` False
``_default_:443.conflicts(\*:443)`` True
========================================= =====
"""
if self._addr_less_specific(addr):
return True
elif self.get_addr() == addr.get_addr():
if self.is_wildcard() or self.get_port() == addr.get_port():
return True
return False
def is_wildcard(self):
"""Returns if address has a wildcard port."""
return self.tup[1] == "*" or not self.tup[1]
def get_sni_addr(self, port):
"""Returns the least specific address that resolves on the port.
Examples:
- ``1.2.3.4:443`` -> ``1.2.3.4:``
- ``1.2.3.4:*`` -> ``1.2.3.4:*``
:param str port: Desired port
"""
if self.is_wildcard():
return self
return self.get_addr_obj(port)
class VirtualHost(object): # pylint: disable=too-few-public-methods
"""Represents an Apache Virtualhost.
:ivar str filep: file path of VH
:ivar str path: Augeas path to virtual host
:ivar set addrs: Virtual Host addresses (:class:`set` of
:class:`common.Addr`)
:ivar str name: ServerName of VHost
:ivar list aliases: Server aliases of vhost
(:class:`list` of :class:`str`)
:ivar bool ssl: SSLEngine on in vhost
:ivar bool enabled: Virtual host is enabled
:ivar bool modmacro: VirtualHost is using mod_macro
:ivar VirtualHost ancestor: A non-SSL VirtualHost this is based on
https://httpd.apache.org/docs/2.4/vhosts/details.html
.. todo:: Any vhost that includes the magic _default_ wildcard is given the
same ServerName as the main server.
"""
# ?: is used for not returning enclosed characters
strip_name = re.compile(r"^(?:.+://)?([^ :$]*)")
def __init__(self, filep, path, addrs, ssl, enabled, name=None,
aliases=None, modmacro=False, ancestor=None):
# pylint: disable=too-many-arguments
"""Initialize a VH."""
self.filep = filep
self.path = path
self.addrs = addrs
self.name = name
self.aliases = aliases if aliases is not None else set()
self.ssl = ssl
self.enabled = enabled
self.modmacro = modmacro
self.ancestor = ancestor
def get_names(self):
"""Return a set of all names."""
all_names = set() # type: Set[str]
all_names.update(self.aliases)
# Strip out any scheme:// and field from servername
if self.name is not None:
all_names.add(VirtualHost.strip_name.findall(self.name)[0])
return all_names
def __str__(self):
return (
"File: {filename}\n"
"Vhost path: {vhpath}\n"
"Addresses: {addrs}\n"
"Name: {name}\n"
"Aliases: {aliases}\n"
"TLS Enabled: {tls}\n"
"Site Enabled: {active}\n"
"mod_macro Vhost: {modmacro}".format(
filename=self.filep,
vhpath=self.path,
addrs=", ".join(str(addr) for addr in self.addrs),
name=self.name if self.name is not None else "",
aliases=", ".join(name for name in self.aliases),
tls="Yes" if self.ssl else "No",
active="Yes" if self.enabled else "No",
modmacro="Yes" if self.modmacro else "No"))
def display_repr(self):
"""Return a representation of VHost to be used in dialog"""
return (
"File: {filename}\n"
"Addresses: {addrs}\n"
"Names: {names}\n"
"HTTPS: {https}\n".format(
filename=self.filep,
addrs=", ".join(str(addr) for addr in self.addrs),
names=", ".join(self.get_names()),
https="Yes" if self.ssl else "No"))
def __eq__(self, other):
if isinstance(other, self.__class__):
return (self.filep == other.filep and self.path == other.path and
self.addrs == other.addrs and
self.get_names() == other.get_names() and
self.ssl == other.ssl and
self.enabled == other.enabled and
self.modmacro == other.modmacro)
return False
def __ne__(self, other):
return not self.__eq__(other)
def __hash__(self):
return hash((self.filep, self.path,
tuple(self.addrs), tuple(self.get_names()),
self.ssl, self.enabled, self.modmacro))
def conflicts(self, addrs):
"""See if vhost conflicts with any of the addrs.
This determines whether or not these addresses would/could overwrite
the vhost addresses.
:param addrs: Iterable Addresses
:type addrs: Iterable :class:~obj.Addr
:returns: If addresses conflicts with vhost
:rtype: bool
"""
for pot_addr in addrs:
for addr in self.addrs:
if addr.conflicts(pot_addr):
return True
return False
def same_server(self, vhost, generic=False):
"""Determines if the vhost is the same 'server'.
Used in redirection - indicates whether or not the two virtual hosts
serve on the exact same IP combinations, but different ports.
The generic flag indicates that that we're trying to match to a
default or generic vhost
.. todo:: Handle _default_
"""
if not generic:
if vhost.get_names() != self.get_names():
return False
# If equal and set is not empty... assume same server
if self.name is not None or self.aliases:
return True
# If we're looking for a generic vhost,
# don't return one with a ServerName
elif self.name:
return False
# Both sets of names are empty.
# Make conservative educated guess... this is very restrictive
# Consider adding more safety checks.
if len(vhost.addrs) != len(self.addrs):
return False
# already_found acts to keep everything very conservative.
# Don't allow multiple ip:ports in same set.
already_found = set() # type: Set[str]
for addr in vhost.addrs:
for local_addr in self.addrs:
if (local_addr.get_addr() == addr.get_addr() and
local_addr != addr and
local_addr.get_addr() not in already_found):
# This intends to make sure we aren't double counting...
# e.g. 127.0.0.1:* - We require same number of addrs
# currently
already_found.add(local_addr.get_addr())
break
else:
return False
return True
certbot-apache-0.39.0/certbot_apache/parser.py 0000644 0001750 0001750 00000112435 13544726630 021505 0 ustar erica erica 0000000 0000000 """ApacheParser is a member object of the ApacheConfigurator class."""
import copy
import fnmatch
import logging
import re
import subprocess
import sys
import six
from acme.magic_typing import Dict, List, Set # pylint: disable=unused-import, no-name-in-module
from certbot import errors
from certbot.compat import os
from certbot_apache import constants
logger = logging.getLogger(__name__)
class ApacheParser(object):
# pylint: disable=too-many-public-methods
"""Class handles the fine details of parsing the Apache Configuration.
.. todo:: Make parsing general... remove sites-available etc...
:ivar str root: Normalized absolute path to the server root
directory. Without trailing slash.
:ivar set modules: All module names that are currently enabled.
:ivar dict loc: Location to place directives, root - configuration origin,
default - user config file, name - NameVirtualHost,
"""
arg_var_interpreter = re.compile(r"\$\{[^ \}]*}")
fnmatch_chars = set(["*", "?", "\\", "[", "]"])
def __init__(self, root, vhostroot=None, version=(2, 4),
configurator=None):
# Note: Order is important here.
# Needed for calling save() with reverter functionality that resides in
# AugeasConfigurator superclass of ApacheConfigurator. This resolves
# issues with aug.load() after adding new files / defines to parse tree
self.configurator = configurator
# Initialize augeas
self.aug = None
self.init_augeas()
if not self.check_aug_version():
raise errors.NotSupportedError(
"Apache plugin support requires libaugeas0 and augeas-lenses "
"version 1.2.0 or higher, please make sure you have you have "
"those installed.")
self.modules = set() # type: Set[str]
self.parser_paths = {} # type: Dict[str, List[str]]
self.variables = {} # type: Dict[str, str]
# Find configuration root and make sure augeas can parse it.
self.root = os.path.abspath(root)
self.loc = {"root": self._find_config_root()}
self.parse_file(self.loc["root"])
if version >= (2, 4):
# Look up variables from httpd and add to DOM if not already parsed
self.update_runtime_variables()
# This problem has been fixed in Augeas 1.0
self.standardize_excl()
# Parse LoadModule directives from configuration files
self.parse_modules()
# Set up rest of locations
self.loc.update(self._set_locations())
# list of the active include paths, before modifications
self.existing_paths = copy.deepcopy(self.parser_paths)
# Must also attempt to parse additional virtual host root
if vhostroot:
self.parse_file(os.path.abspath(vhostroot) + "/" +
self.configurator.option("vhost_files"))
# check to see if there were unparsed define statements
if version < (2, 4):
if self.find_dir("Define", exclude=False):
raise errors.PluginError("Error parsing runtime variables")
def init_augeas(self):
""" Initialize the actual Augeas instance """
try:
import augeas
except ImportError: # pragma: no cover
raise errors.NoInstallationError("Problem in Augeas installation")
self.aug = augeas.Augeas(
# specify a directory to load our preferred lens from
loadpath=constants.AUGEAS_LENS_DIR,
# Do not save backup (we do it ourselves), do not load
# anything by default
flags=(augeas.Augeas.NONE |
augeas.Augeas.NO_MODL_AUTOLOAD |
augeas.Augeas.ENABLE_SPAN))
def check_parsing_errors(self, lens):
"""Verify Augeas can parse all of the lens files.
:param str lens: lens to check for errors
:raises .errors.PluginError: If there has been an error in parsing with
the specified lens.
"""
error_files = self.aug.match("/augeas//error")
for path in error_files:
# Check to see if it was an error resulting from the use of
# the httpd lens
lens_path = self.aug.get(path + "/lens")
# As aug.get may return null
if lens_path and lens in lens_path:
msg = (
"There has been an error in parsing the file {0} on line {1}: "
"{2}".format(
# Strip off /augeas/files and /error
path[13:len(path) - 6],
self.aug.get(path + "/line"),
self.aug.get(path + "/message")))
raise errors.PluginError(msg)
def check_aug_version(self):
""" Checks that we have recent enough version of libaugeas.
If augeas version is recent enough, it will support case insensitive
regexp matching"""
self.aug.set("/test/path/testing/arg", "aRgUMeNT")
try:
matches = self.aug.match(
"/test//*[self::arg=~regexp('argument', 'i')]")
except RuntimeError:
self.aug.remove("/test/path")
return False
self.aug.remove("/test/path")
return matches
def unsaved_files(self):
"""Lists files that have modified Augeas DOM but the changes have not
been written to the filesystem yet, used by `self.save()` and
ApacheConfigurator to check the file state.
:raises .errors.PluginError: If there was an error in Augeas, in
an attempt to save the configuration, or an error creating a
checkpoint
:returns: `set` of unsaved files
"""
save_state = self.aug.get("/augeas/save")
self.aug.set("/augeas/save", "noop")
# Existing Errors
ex_errs = self.aug.match("/augeas//error")
try:
# This is a noop save
self.aug.save()
except (RuntimeError, IOError):
self._log_save_errors(ex_errs)
# Erase Save Notes
self.configurator.save_notes = ""
raise errors.PluginError(
"Error saving files, check logs for more info.")
# Return the original save method
self.aug.set("/augeas/save", save_state)
# Retrieve list of modified files
# Note: Noop saves can cause the file to be listed twice, I used a
# set to remove this possibility. This is a known augeas 0.10 error.
save_paths = self.aug.match("/augeas/events/saved")
save_files = set()
if save_paths:
for path in save_paths:
save_files.add(self.aug.get(path)[6:])
return save_files
def ensure_augeas_state(self):
"""Makes sure that all Augeas dom changes are written to files to avoid
loss of configuration directives when doing additional augeas parsing,
causing a possible augeas.load() resulting dom reset
"""
if self.unsaved_files():
self.configurator.save_notes += "(autosave)"
self.configurator.save()
def save(self, save_files):
"""Saves all changes to the configuration files.
save() is called from ApacheConfigurator to handle the parser specific
tasks of saving.
:param list save_files: list of strings of file paths that we need to save.
"""
self.configurator.save_notes = ""
self.aug.save()
# Force reload if files were modified
# This is needed to recalculate augeas directive span
if save_files:
for sf in save_files:
self.aug.remove("/files/"+sf)
self.aug.load()
def _log_save_errors(self, ex_errs):
"""Log errors due to bad Augeas save.
:param list ex_errs: Existing errors before save
"""
# Check for the root of save problems
new_errs = self.aug.match("/augeas//error")
# logger.error("During Save - %s", mod_conf)
logger.error("Unable to save files: %s. Attempted Save Notes: %s",
", ".join(err[13:len(err) - 6] for err in new_errs
# Only new errors caused by recent save
if err not in ex_errs), self.configurator.save_notes)
def add_include(self, main_config, inc_path):
"""Add Include for a new configuration file if one does not exist
:param str main_config: file path to main Apache config file
:param str inc_path: path of file to include
"""
if not self.find_dir(case_i("Include"), inc_path):
logger.debug("Adding Include %s to %s",
inc_path, get_aug_path(main_config))
self.add_dir(
get_aug_path(main_config),
"Include", inc_path)
# Add new path to parser paths
new_dir = os.path.dirname(inc_path)
new_file = os.path.basename(inc_path)
self.existing_paths.setdefault(new_dir, []).append(new_file)
def add_mod(self, mod_name):
"""Shortcut for updating parser modules."""
if mod_name + "_module" not in self.modules:
self.modules.add(mod_name + "_module")
if "mod_" + mod_name + ".c" not in self.modules:
self.modules.add("mod_" + mod_name + ".c")
def reset_modules(self):
"""Reset the loaded modules list. This is called from cleanup to clear
temporarily loaded modules."""
self.modules = set()
self.update_modules()
self.parse_modules()
def parse_modules(self):
"""Iterates on the configuration until no new modules are loaded.
..todo:: This should be attempted to be done with a binary to avoid
the iteration issue. Else... parse and enable mods at same time.
"""
mods = set() # type: Set[str]
matches = self.find_dir("LoadModule")
iterator = iter(matches)
# Make sure prev_size != cur_size for do: while: iteration
prev_size = -1
while len(mods) != prev_size:
prev_size = len(mods)
for match_name, match_filename in six.moves.zip(
iterator, iterator):
mod_name = self.get_arg(match_name)
mod_filename = self.get_arg(match_filename)
if mod_name and mod_filename:
mods.add(mod_name)
mods.add(os.path.basename(mod_filename)[:-2] + "c")
else:
logger.debug("Could not read LoadModule directive from " +
"Augeas path: %s", match_name[6:])
self.modules.update(mods)
def update_runtime_variables(self):
"""Update Includes, Defines and Includes from httpd config dump data"""
self.update_defines()
self.update_includes()
self.update_modules()
def update_defines(self):
"""Get Defines from httpd process"""
variables = dict()
define_cmd = [self.configurator.option("ctl"), "-t", "-D",
"DUMP_RUN_CFG"]
matches = self.parse_from_subprocess(define_cmd, r"Define: ([^ \n]*)")
try:
matches.remove("DUMP_RUN_CFG")
except ValueError:
return
for match in matches:
if match.count("=") > 1:
logger.error("Unexpected number of equal signs in "
"runtime config dump.")
raise errors.PluginError(
"Error parsing Apache runtime variables")
parts = match.partition("=")
variables[parts[0]] = parts[2]
self.variables = variables
def update_includes(self):
"""Get includes from httpd process, and add them to DOM if needed"""
# Find_dir iterates over configuration for Include and IncludeOptional
# directives to make sure we see the full include tree present in the
# configuration files
_ = self.find_dir("Include")
inc_cmd = [self.configurator.option("ctl"), "-t", "-D",
"DUMP_INCLUDES"]
matches = self.parse_from_subprocess(inc_cmd, r"\(.*\) (.*)")
if matches:
for i in matches:
if not self.parsed_in_current(i):
self.parse_file(i)
def update_modules(self):
"""Get loaded modules from httpd process, and add them to DOM"""
mod_cmd = [self.configurator.option("ctl"), "-t", "-D",
"DUMP_MODULES"]
matches = self.parse_from_subprocess(mod_cmd, r"(.*)_module")
for mod in matches:
self.add_mod(mod.strip())
def parse_from_subprocess(self, command, regexp):
"""Get values from stdout of subprocess command
:param list command: Command to run
:param str regexp: Regexp for parsing
:returns: list parsed from command output
:rtype: list
"""
stdout = self._get_runtime_cfg(command)
return re.compile(regexp).findall(stdout)
def _get_runtime_cfg(self, command): # pylint: disable=no-self-use
"""Get runtime configuration info.
:param command: Command to run
:returns: stdout from command
"""
try:
proc = subprocess.Popen(
command,
stdout=subprocess.PIPE,
stderr=subprocess.PIPE,
universal_newlines=True)
stdout, stderr = proc.communicate()
except (OSError, ValueError):
logger.error(
"Error running command %s for runtime parameters!%s",
command, os.linesep)
raise errors.MisconfigurationError(
"Error accessing loaded Apache parameters: {0}".format(
command))
# Small errors that do not impede
if proc.returncode != 0:
logger.warning("Error in checking parameter list: %s", stderr)
raise errors.MisconfigurationError(
"Apache is unable to check whether or not the module is "
"loaded because Apache is misconfigured.")
return stdout
def filter_args_num(self, matches, args): # pylint: disable=no-self-use
"""Filter out directives with specific number of arguments.
This function makes the assumption that all related arguments are given
in order. Thus /files/apache/directive[5]/arg[2] must come immediately
after /files/apache/directive[5]/arg[1]. Runs in 1 linear pass.
:param string matches: Matches of all directives with arg nodes
:param int args: Number of args you would like to filter
:returns: List of directives that contain # of arguments.
(arg is stripped off)
"""
filtered = []
if args == 1:
for i, match in enumerate(matches):
if match.endswith("/arg"):
filtered.append(matches[i][:-4])
else:
for i, match in enumerate(matches):
if match.endswith("/arg[%d]" % args):
# Make sure we don't cause an IndexError (end of list)
# Check to make sure arg + 1 doesn't exist
if (i == (len(matches) - 1) or
not matches[i + 1].endswith("/arg[%d]" %
(args + 1))):
filtered.append(matches[i][:-len("/arg[%d]" % args)])
return filtered
def add_dir_to_ifmodssl(self, aug_conf_path, directive, args):
"""Adds directive and value to IfMod ssl block.
Adds given directive and value along configuration path within
an IfMod mod_ssl.c block. If the IfMod block does not exist in
the file, it is created.
:param str aug_conf_path: Desired Augeas config path to add directive
:param str directive: Directive you would like to add, e.g. Listen
:param args: Values of the directive; str "443" or list of str
:type args: list
"""
# TODO: Add error checking code... does the path given even exist?
# Does it throw exceptions?
if_mod_path = self.get_ifmod(aug_conf_path, "mod_ssl.c")
# IfModule can have only one valid argument, so append after
self.aug.insert(if_mod_path + "arg", "directive", False)
nvh_path = if_mod_path + "directive[1]"
self.aug.set(nvh_path, directive)
if len(args) == 1:
self.aug.set(nvh_path + "/arg", args[0])
else:
for i, arg in enumerate(args):
self.aug.set("%s/arg[%d]" % (nvh_path, i + 1), arg)
def get_ifmod(self, aug_conf_path, mod, beginning=False):
"""Returns the path to and creates one if it doesn't exist.
:param str aug_conf_path: Augeas configuration path
:param str mod: module ie. mod_ssl.c
:param bool beginning: If the IfModule should be created to the beginning
of augeas path DOM tree.
:returns: Augeas path of the requested IfModule directive that pre-existed
or was created during the process. The path may be dynamic,
i.e. .../IfModule[last()]
:rtype: str
"""
if_mods = self.aug.match(("%s/IfModule/*[self::arg='%s']" %
(aug_conf_path, mod)))
if not if_mods:
return self.create_ifmod(aug_conf_path, mod, beginning)
# Strip off "arg" at end of first ifmod path
return if_mods[0].rpartition("arg")[0]
def create_ifmod(self, aug_conf_path, mod, beginning=False):
"""Creates a new and returns its path.
:param str aug_conf_path: Augeas configuration path
:param str mod: module ie. mod_ssl.c
:param bool beginning: If the IfModule should be created to the beginning
of augeas path DOM tree.
:returns: Augeas path of the newly created IfModule directive.
The path may be dynamic, i.e. .../IfModule[last()]
:rtype: str
"""
if beginning:
c_path_arg = "{}/IfModule[1]/arg".format(aug_conf_path)
# Insert IfModule before the first directive
self.aug.insert("{}/directive[1]".format(aug_conf_path),
"IfModule", True)
retpath = "{}/IfModule[1]/".format(aug_conf_path)
else:
c_path = "{}/IfModule[last() + 1]".format(aug_conf_path)
c_path_arg = "{}/IfModule[last()]/arg".format(aug_conf_path)
self.aug.set(c_path, "")
retpath = "{}/IfModule[last()]/".format(aug_conf_path)
self.aug.set(c_path_arg, mod)
return retpath
def add_dir(self, aug_conf_path, directive, args):
"""Appends directive to the end fo the file given by aug_conf_path.
.. note:: Not added to AugeasConfigurator because it may depend
on the lens
:param str aug_conf_path: Augeas configuration path to add directive
:param str directive: Directive to add
:param args: Value of the directive. ie. Listen 443, 443 is arg
:type args: list or str
"""
self.aug.set(aug_conf_path + "/directive[last() + 1]", directive)
if isinstance(args, list):
for i, value in enumerate(args, 1):
self.aug.set(
"%s/directive[last()]/arg[%d]" % (aug_conf_path, i), value)
else:
self.aug.set(aug_conf_path + "/directive[last()]/arg", args)
def add_dir_beginning(self, aug_conf_path, dirname, args):
"""Adds the directive to the beginning of defined aug_conf_path.
:param str aug_conf_path: Augeas configuration path to add directive
:param str dirname: Directive to add
:param args: Value of the directive. ie. Listen 443, 443 is arg
:type args: list or str
"""
first_dir = aug_conf_path + "/directive[1]"
self.aug.insert(first_dir, "directive", True)
self.aug.set(first_dir, dirname)
if isinstance(args, list):
for i, value in enumerate(args, 1):
self.aug.set(first_dir + "/arg[%d]" % (i), value)
else:
self.aug.set(first_dir + "/arg", args)
def add_comment(self, aug_conf_path, comment):
"""Adds the comment to the augeas path
:param str aug_conf_path: Augeas configuration path to add directive
:param str comment: Comment content
"""
self.aug.set(aug_conf_path + "/#comment[last() + 1]", comment)
def find_comments(self, arg, start=None):
"""Finds a comment with specified content from the provided DOM path
:param str arg: Comment content to search
:param str start: Beginning Augeas path to begin looking
:returns: List of augeas paths containing the comment content
:rtype: list
"""
if not start:
start = get_aug_path(self.root)
comments = self.aug.match("%s//*[label() = '#comment']" % start)
results = []
for comment in comments:
c_content = self.aug.get(comment)
if c_content and arg in c_content:
results.append(comment)
return results
def find_dir(self, directive, arg=None, start=None, exclude=True):
"""Finds directive in the configuration.
Recursively searches through config files to find directives
Directives should be in the form of a case insensitive regex currently
.. todo:: arg should probably be a list
.. todo:: arg search currently only supports direct matching. It does
not handle the case of variables or quoted arguments. This should
be adapted to use a generic search for the directive and then do a
case-insensitive self.get_arg filter
Note: Augeas is inherently case sensitive while Apache is case
insensitive. Augeas 1.0 allows case insensitive regexes like
regexp(/Listen/, "i"), however the version currently supported
by Ubuntu 0.10 does not. Thus I have included my own case insensitive
transformation by calling case_i() on everything to maintain
compatibility.
:param str directive: Directive to look for
:param arg: Specific value directive must have, None if all should
be considered
:type arg: str or None
:param str start: Beginning Augeas path to begin looking
:param bool exclude: Whether or not to exclude directives based on
variables and enabled modules
"""
# Cannot place member variable in the definition of the function so...
if not start:
start = get_aug_path(self.loc["root"])
# No regexp code
# if arg is None:
# matches = self.aug.match(start +
# "//*[self::directive='" + directive + "']/arg")
# else:
# matches = self.aug.match(start +
# "//*[self::directive='" + directive +
# "']/* [self::arg='" + arg + "']")
# includes = self.aug.match(start +
# "//* [self::directive='Include']/* [label()='arg']")
regex = "(%s)|(%s)|(%s)" % (case_i(directive),
case_i("Include"),
case_i("IncludeOptional"))
matches = self.aug.match(
"%s//*[self::directive=~regexp('%s')]" % (start, regex))
if exclude:
matches = self._exclude_dirs(matches)
if arg is None:
arg_suffix = "/arg"
else:
arg_suffix = "/*[self::arg=~regexp('%s')]" % case_i(arg)
ordered_matches = [] # type: List[str]
# TODO: Wildcards should be included in alphabetical order
# https://httpd.apache.org/docs/2.4/mod/core.html#include
for match in matches:
dir_ = self.aug.get(match).lower()
if dir_ == "include" or dir_ == "includeoptional":
ordered_matches.extend(self.find_dir(
directive, arg,
self._get_include_path(self.get_arg(match + "/arg")),
exclude))
# This additionally allows Include
if dir_ == directive.lower():
ordered_matches.extend(self.aug.match(match + arg_suffix))
return ordered_matches
def get_all_args(self, match):
"""
Tries to fetch all arguments for a directive. See get_arg.
Note that if match is an ancestor node, it returns all names of
child directives as well as the list of arguments.
"""
if match[-1] != "/":
match = match+"/"
allargs = self.aug.match(match + '*')
return [self.get_arg(arg) for arg in allargs]
def get_arg(self, match):
"""Uses augeas.get to get argument value and interprets result.
This also converts all variables and parameters appropriately.
"""
value = self.aug.get(match)
# No need to strip quotes for variables, as apache2ctl already does
# this, but we do need to strip quotes for all normal arguments.
# Note: normal argument may be a quoted variable
# e.g. strip now, not later
if not value:
return None
else:
value = value.strip("'\"")
variables = ApacheParser.arg_var_interpreter.findall(value)
for var in variables:
# Strip off ${ and }
try:
value = value.replace(var, self.variables[var[2:-1]])
except KeyError:
raise errors.PluginError("Error Parsing variable: %s" % var)
return value
def _exclude_dirs(self, matches):
"""Exclude directives that are not loaded into the configuration."""
filters = [("ifmodule", self.modules), ("ifdefine", self.variables)]
valid_matches = []
for match in matches:
for filter_ in filters:
if not self._pass_filter(match, filter_):
break
else:
valid_matches.append(match)
return valid_matches
def _pass_filter(self, match, filter_):
"""Determine if directive passes a filter.
:param str match: Augeas path
:param list filter: list of tuples of form
[("lowercase if directive", set of relevant parameters)]
"""
match_l = match.lower()
last_match_idx = match_l.find(filter_[0])
while last_match_idx != -1:
# Check args
end_of_if = match_l.find("/", last_match_idx)
# This should be aug.get (vars are not used e.g. parser.aug_get)
expression = self.aug.get(match[:end_of_if] + "/arg")
if expression.startswith("!"):
# Strip off "!"
if expression[1:] in filter_[1]:
return False
else:
if expression not in filter_[1]:
return False
last_match_idx = match_l.find(filter_[0], end_of_if)
return True
def _get_include_path(self, arg):
"""Converts an Apache Include directive into Augeas path.
Converts an Apache Include directive argument into an Augeas
searchable path
.. todo:: convert to use os.path.join()
:param str arg: Argument of Include directive
:returns: Augeas path string
:rtype: str
"""
# Check to make sure only expected characters are used <- maybe remove
# validChars = re.compile("[a-zA-Z0-9.*?_-/]*")
# matchObj = validChars.match(arg)
# if matchObj.group() != arg:
# logger.error("Error: Invalid regexp characters in %s", arg)
# return []
# Remove beginning and ending quotes
arg = arg.strip("'\"")
# Standardize the include argument based on server root
if not arg.startswith("/"):
# Normpath will condense ../
arg = os.path.normpath(os.path.join(self.root, arg))
else:
arg = os.path.normpath(arg)
# Attempts to add a transform to the file if one does not already exist
if os.path.isdir(arg):
self.parse_file(os.path.join(arg, "*"))
else:
self.parse_file(arg)
# Argument represents an fnmatch regular expression, convert it
# Split up the path and convert each into an Augeas accepted regex
# then reassemble
split_arg = arg.split("/")
for idx, split in enumerate(split_arg):
if any(char in ApacheParser.fnmatch_chars for char in split):
# Turn it into a augeas regex
# TODO: Can this instead be an augeas glob instead of regex
split_arg[idx] = ("* [label()=~regexp('%s')]" %
self.fnmatch_to_re(split))
# Reassemble the argument
# Note: This also normalizes the argument /serverroot/ -> /serverroot
arg = "/".join(split_arg)
return get_aug_path(arg)
def fnmatch_to_re(self, clean_fn_match): # pylint: disable=no-self-use
"""Method converts Apache's basic fnmatch to regular expression.
Assumption - Configs are assumed to be well-formed and only writable by
privileged users.
https://apr.apache.org/docs/apr/2.0/apr__fnmatch_8h_source.html
http://apache2.sourcearchive.com/documentation/2.2.16-6/apr__fnmatch_8h_source.html
:param str clean_fn_match: Apache style filename match, like globs
:returns: regex suitable for augeas
:rtype: str
"""
if sys.version_info < (3, 6):
# This strips off final /Z(?ms)
return fnmatch.translate(clean_fn_match)[:-7]
# Since Python 3.6, it returns a different pattern like (?s:.*\.load)\Z
return fnmatch.translate(clean_fn_match)[4:-3] # pragma: no cover
def parse_file(self, filepath):
"""Parse file with Augeas
Checks to see if file_path is parsed by Augeas
If filepath isn't parsed, the file is added and Augeas is reloaded
:param str filepath: Apache config file path
"""
use_new, remove_old = self._check_path_actions(filepath)
# Ensure that we have the latest Augeas DOM state on disk before
# calling aug.load() which reloads the state from disk
self.ensure_augeas_state()
# Test if augeas included file for Httpd.lens
# Note: This works for augeas globs, ie. *.conf
if use_new:
inc_test = self.aug.match(
"/augeas/load/Httpd['%s' =~ glob(incl)]" % filepath)
if not inc_test:
# Load up files
# This doesn't seem to work on TravisCI
# self.aug.add_transform("Httpd.lns", [filepath])
if remove_old:
self._remove_httpd_transform(filepath)
self._add_httpd_transform(filepath)
self.aug.load()
def parsed_in_current(self, filep):
"""Checks if the file path is parsed by current Augeas parser config
ie. returns True if the file is found on a path that's found in live
Augeas configuration.
:param str filep: Path to match
:returns: True if file is parsed in existing configuration tree
:rtype: bool
"""
return self._parsed_by_parser_paths(filep, self.parser_paths)
def parsed_in_original(self, filep):
"""Checks if the file path is parsed by existing Apache config.
ie. returns True if the file is found on a path that matches Include or
IncludeOptional statement in the Apache configuration.
:param str filep: Path to match
:returns: True if file is parsed in existing configuration tree
:rtype: bool
"""
return self._parsed_by_parser_paths(filep, self.existing_paths)
def _parsed_by_parser_paths(self, filep, paths):
"""Helper function that searches through provided paths and returns
True if file path is found in the set"""
for directory in paths.keys():
for filename in paths[directory]:
if fnmatch.fnmatch(filep, os.path.join(directory, filename)):
return True
return False
def _check_path_actions(self, filepath):
"""Determine actions to take with a new augeas path
This helper function will return a tuple that defines
if we should try to append the new filepath to augeas
parser paths, and / or remove the old one with more
narrow matching.
:param str filepath: filepath to check the actions for
"""
try:
new_file_match = os.path.basename(filepath)
existing_matches = self.parser_paths[os.path.dirname(filepath)]
if "*" in existing_matches:
use_new = False
else:
use_new = True
remove_old = new_file_match == "*"
except KeyError:
use_new = True
remove_old = False
return use_new, remove_old
def _remove_httpd_transform(self, filepath):
"""Remove path from Augeas transform
:param str filepath: filepath to remove
"""
remove_basenames = self.parser_paths[os.path.dirname(filepath)]
remove_dirname = os.path.dirname(filepath)
for name in remove_basenames:
remove_path = remove_dirname + "/" + name
remove_inc = self.aug.match(
"/augeas/load/Httpd/incl [. ='%s']" % remove_path)
self.aug.remove(remove_inc[0])
self.parser_paths.pop(remove_dirname)
def _add_httpd_transform(self, incl):
"""Add a transform to Augeas.
This function will correctly add a transform to augeas
The existing augeas.add_transform in python doesn't seem to work for
Travis CI as it loads in libaugeas.so.0.10.0
:param str incl: filepath to include for transform
"""
last_include = self.aug.match("/augeas/load/Httpd/incl [last()]")
if last_include:
# Insert a new node immediately after the last incl
self.aug.insert(last_include[0], "incl", False)
self.aug.set("/augeas/load/Httpd/incl[last()]", incl)
# On first use... must load lens and add file to incl
else:
# Augeas uses base 1 indexing... insert at beginning...
self.aug.set("/augeas/load/Httpd/lens", "Httpd.lns")
self.aug.set("/augeas/load/Httpd/incl", incl)
# Add included path to paths dictionary
try:
self.parser_paths[os.path.dirname(incl)].append(
os.path.basename(incl))
except KeyError:
self.parser_paths[os.path.dirname(incl)] = [
os.path.basename(incl)]
def standardize_excl(self):
"""Standardize the excl arguments for the Httpd lens in Augeas.
Note: Hack!
Standardize the excl arguments for the Httpd lens in Augeas
Servers sometimes give incorrect defaults
Note: This problem should be fixed in Augeas 1.0. Unfortunately,
Augeas 0.10 appears to be the most popular version currently.
"""
# attempt to protect against augeas error in 0.10.0 - ubuntu
# *.augsave -> /*.augsave upon augeas.load()
# Try to avoid bad httpd files
# There has to be a better way... but after a day and a half of testing
# I had no luck
# This is a hack... work around... submit to augeas if still not fixed
excl = ["*.augnew", "*.augsave", "*.dpkg-dist", "*.dpkg-bak",
"*.dpkg-new", "*.dpkg-old", "*.rpmsave", "*.rpmnew",
"*~",
self.root + "/*.augsave",
self.root + "/*~",
self.root + "/*/*augsave",
self.root + "/*/*~",
self.root + "/*/*/*.augsave",
self.root + "/*/*/*~"]
for i, excluded in enumerate(excl, 1):
self.aug.set("/augeas/load/Httpd/excl[%d]" % i, excluded)
self.aug.load()
def _set_locations(self):
"""Set default location for directives.
Locations are given as file_paths
.. todo:: Make sure that files are included
"""
default = self.loc["root"]
temp = os.path.join(self.root, "ports.conf")
if os.path.isfile(temp):
listen = temp
name = temp
else:
listen = default
name = default
return {"default": default, "listen": listen, "name": name}
def _find_config_root(self):
"""Find the Apache Configuration Root file."""
location = ["apache2.conf", "httpd.conf", "conf/httpd.conf"]
for name in location:
if os.path.isfile(os.path.join(self.root, name)):
return os.path.join(self.root, name)
raise errors.NoInstallationError("Could not find configuration root")
def case_i(string):
"""Returns case insensitive regex.
Returns a sloppy, but necessary version of a case insensitive regex.
Any string should be able to be submitted and the string is
escaped and then made case insensitive.
May be replaced by a more proper /i once augeas 1.0 is widely
supported.
:param str string: string to make case i regex
"""
return "".join(["[" + c.upper() + c.lower() + "]"
if c.isalpha() else c for c in re.escape(string)])
def get_aug_path(file_path):
"""Return augeas path for full filepath.
:param str file_path: Full filepath
"""
return "/files%s" % file_path
certbot-apache-0.39.0/certbot_apache/__init__.py 0000644 0001750 0001750 00000000035 13544726630 021740 0 ustar erica erica 0000000 0000000 """Certbot Apache plugin."""
certbot-apache-0.39.0/certbot_apache/override_centos.py 0000644 0001750 0001750 00000020646 13544726630 023405 0 ustar erica erica 0000000 0000000 """ Distribution specific override class for CentOS family (RHEL, Fedora) """
import logging
import pkg_resources
import zope.interface
from certbot import errors
from certbot import interfaces
from certbot import util
from certbot.errors import MisconfigurationError
from acme.magic_typing import List # pylint: disable=unused-import, no-name-in-module
from certbot_apache import apache_util
from certbot_apache import configurator
from certbot_apache import parser
logger = logging.getLogger(__name__)
@zope.interface.provider(interfaces.IPluginFactory)
class CentOSConfigurator(configurator.ApacheConfigurator):
"""CentOS specific ApacheConfigurator override class"""
OS_DEFAULTS = dict(
server_root="/etc/httpd",
vhost_root="/etc/httpd/conf.d",
vhost_files="*.conf",
logs_root="/var/log/httpd",
ctl="apachectl",
version_cmd=['apachectl', '-v'],
restart_cmd=['apachectl', 'graceful'],
restart_cmd_alt=['apachectl', 'restart'],
conftest_cmd=['apachectl', 'configtest'],
enmod=None,
dismod=None,
le_vhost_ext="-le-ssl.conf",
handle_modules=False,
handle_sites=False,
challenge_location="/etc/httpd/conf.d",
MOD_SSL_CONF_SRC=pkg_resources.resource_filename(
"certbot_apache", "centos-options-ssl-apache.conf")
)
def config_test(self):
"""
Override config_test to mitigate configtest error in vanilla installation
of mod_ssl in Fedora. The error is caused by non-existent self-signed
certificates referenced by the configuration, that would be autogenerated
during the first (re)start of httpd.
"""
os_info = util.get_os_info()
fedora = os_info[0].lower() == "fedora"
try:
super(CentOSConfigurator, self).config_test()
except errors.MisconfigurationError:
if fedora:
self._try_restart_fedora()
else:
raise
def _try_restart_fedora(self):
"""
Tries to restart httpd using systemctl to generate the self signed keypair.
"""
try:
util.run_script(['systemctl', 'restart', 'httpd'])
except errors.SubprocessError as err:
raise errors.MisconfigurationError(str(err))
# Finish with actual config check to see if systemctl restart helped
super(CentOSConfigurator, self).config_test()
def _prepare_options(self):
"""
Override the options dictionary initialization in order to support
alternative restart cmd used in CentOS.
"""
super(CentOSConfigurator, self)._prepare_options()
self.options["restart_cmd_alt"][0] = self.option("ctl")
def get_parser(self):
"""Initializes the ApacheParser"""
return CentOSParser(
self.option("server_root"), self.option("vhost_root"),
self.version, configurator=self)
def _deploy_cert(self, *args, **kwargs): # pylint: disable=arguments-differ
"""
Override _deploy_cert in order to ensure that the Apache configuration
has "LoadModule ssl_module..." before parsing the VirtualHost configuration
that was created by Certbot
"""
super(CentOSConfigurator, self)._deploy_cert(*args, **kwargs)
if self.version < (2, 4, 0):
self._deploy_loadmodule_ssl_if_needed()
def _deploy_loadmodule_ssl_if_needed(self):
"""
Add "LoadModule ssl_module " to main httpd.conf if
it doesn't exist there already.
"""
loadmods = self.parser.find_dir("LoadModule", "ssl_module", exclude=False)
correct_ifmods = [] # type: List[str]
loadmod_args = [] # type: List[str]
loadmod_paths = [] # type: List[str]
for m in loadmods:
noarg_path = m.rpartition("/")[0]
path_args = self.parser.get_all_args(noarg_path)
if loadmod_args:
if loadmod_args != path_args:
msg = ("Certbot encountered multiple LoadModule directives "
"for LoadModule ssl_module with differing library paths. "
"Please remove or comment out the one(s) that are not in "
"use, and run Certbot again.")
raise MisconfigurationError(msg)
else:
loadmod_args = path_args
if self.parser.not_modssl_ifmodule(noarg_path): # pylint: disable=no-member
if self.parser.loc["default"] in noarg_path:
# LoadModule already in the main configuration file
if ("ifmodule/" in noarg_path.lower() or
"ifmodule[1]" in noarg_path.lower()):
# It's the first or only IfModule in the file
return
# Populate the list of known !mod_ssl.c IfModules
nodir_path = noarg_path.rpartition("/directive")[0]
correct_ifmods.append(nodir_path)
else:
loadmod_paths.append(noarg_path)
if not loadmod_args:
# Do not try to enable mod_ssl
return
# Force creation as the directive wasn't found from the beginning of
# httpd.conf
rootconf_ifmod = self.parser.create_ifmod(
parser.get_aug_path(self.parser.loc["default"]),
"!mod_ssl.c", beginning=True)
# parser.get_ifmod returns a path postfixed with "/", remove that
self.parser.add_dir(rootconf_ifmod[:-1], "LoadModule", loadmod_args)
correct_ifmods.append(rootconf_ifmod[:-1])
self.save_notes += "Added LoadModule ssl_module to main configuration.\n"
# Wrap LoadModule mod_ssl inside of if it's not
# configured like this already.
for loadmod_path in loadmod_paths:
nodir_path = loadmod_path.split("/directive")[0]
# Remove the old LoadModule directive
self.parser.aug.remove(loadmod_path)
# Create a new IfModule !mod_ssl.c if not already found on path
ssl_ifmod = self.parser.get_ifmod(nodir_path, "!mod_ssl.c",
beginning=True)[:-1]
if ssl_ifmod not in correct_ifmods:
self.parser.add_dir(ssl_ifmod, "LoadModule", loadmod_args)
correct_ifmods.append(ssl_ifmod)
self.save_notes += ("Wrapped pre-existing LoadModule ssl_module "
"inside of block.\n")
class CentOSParser(parser.ApacheParser):
"""CentOS specific ApacheParser override class"""
def __init__(self, *args, **kwargs):
# CentOS specific configuration file for Apache
self.sysconfig_filep = "/etc/sysconfig/httpd"
super(CentOSParser, self).__init__(*args, **kwargs)
def update_runtime_variables(self):
""" Override for update_runtime_variables for custom parsing """
# Opportunistic, works if SELinux not enforced
super(CentOSParser, self).update_runtime_variables()
self.parse_sysconfig_var()
def parse_sysconfig_var(self):
""" Parses Apache CLI options from CentOS configuration file """
defines = apache_util.parse_define_file(self.sysconfig_filep, "OPTIONS")
for k in defines:
self.variables[k] = defines[k]
def not_modssl_ifmodule(self, path):
"""Checks if the provided Augeas path has argument !mod_ssl"""
if "ifmodule" not in path.lower():
return False
# Trim the path to the last ifmodule
workpath = path.lower()
while workpath:
# Get path to the last IfModule (ignore the tail)
parts = workpath.rpartition("ifmodule")
if not parts[0]:
# IfModule not found
break
ifmod_path = parts[0] + parts[1]
# Check if ifmodule had an index
if parts[2].startswith("["):
# Append the index from tail
ifmod_path += parts[2].partition("/")[0]
# Get the original path trimmed to correct length
# This is required to preserve cases
ifmod_real_path = path[0:len(ifmod_path)]
if "!mod_ssl.c" in self.get_all_args(ifmod_real_path):
return True
# Set the workpath to the heading part
workpath = parts[0]
return False
certbot-apache-0.39.0/certbot_apache/display_ops.py 0000644 0001750 0001750 00000010234 13544726630 022531 0 ustar erica erica 0000000 0000000 """Contains UI methods for Apache operations."""
import logging
import zope.component
import certbot.display.util as display_util
from certbot import errors
from certbot import interfaces
from certbot.compat import os
logger = logging.getLogger(__name__)
def select_vhost_multiple(vhosts):
"""Select multiple Vhosts to install the certificate for
:param vhosts: Available Apache VirtualHosts
:type vhosts: :class:`list` of type `~obj.Vhost`
:returns: List of VirtualHosts
:rtype: :class:`list`of type `~obj.Vhost`
"""
if not vhosts:
return list()
tags_list = [vhost.display_repr()+"\n" for vhost in vhosts]
# Remove the extra newline from the last entry
if tags_list:
tags_list[-1] = tags_list[-1][:-1]
code, names = zope.component.getUtility(interfaces.IDisplay).checklist(
"Which VirtualHosts would you like to install the wildcard certificate for?",
tags=tags_list, force_interactive=True)
if code == display_util.OK:
return_vhosts = _reversemap_vhosts(names, vhosts)
return return_vhosts
return []
def _reversemap_vhosts(names, vhosts):
"""Helper function for select_vhost_multiple for mapping string
representations back to actual vhost objects"""
return_vhosts = list()
for selection in names:
for vhost in vhosts:
if vhost.display_repr().strip() == selection.strip():
return_vhosts.append(vhost)
return return_vhosts
def select_vhost(domain, vhosts):
"""Select an appropriate Apache Vhost.
:param vhosts: Available Apache VirtualHosts
:type vhosts: :class:`list` of type `~obj.Vhost`
:returns: VirtualHost or `None`
:rtype: `~obj.Vhost` or `None`
"""
if not vhosts:
return None
code, tag = _vhost_menu(domain, vhosts)
if code == display_util.OK:
return vhosts[tag]
return None
def _vhost_menu(domain, vhosts):
"""Select an appropriate Apache Vhost.
:param vhosts: Available Apache Virtual Hosts
:type vhosts: :class:`list` of type `~obj.Vhost`
:returns: Display tuple - ('code', tag')
:rtype: `tuple`
"""
# Free characters in the line of display text (9 is for ' | ' formatting)
free_chars = display_util.WIDTH - len("HTTPS") - len("Enabled") - 9
if free_chars < 2:
logger.debug("Display size is too small for "
"certbot_apache.display_ops._vhost_menu()")
# This runs the edge off the screen, but it doesn't cause an "error"
filename_size = 1
disp_name_size = 1
else:
# Filename is a bit more important and probably longer with 000-*
filename_size = int(free_chars * .6)
disp_name_size = free_chars - filename_size
choices = []
for vhost in vhosts:
if len(vhost.get_names()) == 1:
disp_name = next(iter(vhost.get_names()))
elif not vhost.get_names():
disp_name = ""
else:
disp_name = "Multiple Names"
choices.append(
"{fn:{fn_size}s} | {name:{name_size}s} | {https:5s} | "
"{active:7s}".format(
fn=os.path.basename(vhost.filep)[:filename_size],
name=disp_name[:disp_name_size],
https="HTTPS" if vhost.ssl else "",
active="Enabled" if vhost.enabled else "",
fn_size=filename_size,
name_size=disp_name_size)
)
try:
code, tag = zope.component.getUtility(interfaces.IDisplay).menu(
"We were unable to find a vhost with a ServerName "
"or Address of {0}.{1}Which virtual host would you "
"like to choose?".format(domain, os.linesep),
choices, force_interactive=True)
except errors.MissingCommandlineFlag:
msg = (
"Encountered vhost ambiguity when trying to find a vhost for "
"{0} but was unable to ask for user "
"guidance in non-interactive mode. Certbot may need "
"vhosts to be explicitly labelled with ServerName or "
"ServerAlias directives.".format(domain))
logger.warning(msg)
raise errors.MissingCommandlineFlag(msg)
return code, tag
certbot-apache-0.39.0/certbot_apache/tests/ 0002755 0001750 0001750 00000000000 13544726642 021000 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/debian_test.py 0000644 0001750 0001750 00000021675 13544726630 023641 0 ustar erica erica 0000000 0000000 """Test for certbot_apache.configurator for Debian overrides"""
import shutil
import unittest
import mock
from certbot import errors
from certbot.compat import os
from certbot_apache import apache_util
from certbot_apache import obj
from certbot_apache.tests import util
class MultipleVhostsTestDebian(util.ApacheTest):
"""Multiple vhost tests for Debian family of distros"""
_multiprocess_can_split_ = True
def setUp(self): # pylint: disable=arguments-differ
super(MultipleVhostsTestDebian, self).setUp()
self.config = util.get_apache_configurator(
self.config_path, self.vhost_path, self.config_dir, self.work_dir,
os_info="debian")
self.config = self.mock_deploy_cert(self.config)
self.vh_truth = util.get_vh_truth(self.temp_dir,
"debian_apache_2_4/multiple_vhosts")
def mock_deploy_cert(self, config):
"""A test for a mock deploy cert"""
config.real_deploy_cert = self.config.deploy_cert
def mocked_deploy_cert(*args, **kwargs):
"""a helper to mock a deployed cert"""
g_mod = "certbot_apache.configurator.ApacheConfigurator.enable_mod"
d_mod = "certbot_apache.override_debian.DebianConfigurator.enable_mod"
with mock.patch(g_mod):
with mock.patch(d_mod):
config.real_deploy_cert(*args, **kwargs)
self.config.deploy_cert = mocked_deploy_cert
return self.config
def test_enable_mod_unsupported_dirs(self):
shutil.rmtree(os.path.join(self.config.parser.root, "mods-enabled"))
self.assertRaises(
errors.NotSupportedError, self.config.enable_mod, "ssl")
@mock.patch("certbot.util.run_script")
@mock.patch("certbot.util.exe_exists")
@mock.patch("certbot_apache.parser.subprocess.Popen")
def test_enable_mod(self, mock_popen, mock_exe_exists, mock_run_script):
mock_popen().communicate.return_value = ("Define: DUMP_RUN_CFG", "")
mock_popen().returncode = 0
mock_exe_exists.return_value = True
self.config.enable_mod("ssl")
self.assertTrue("ssl_module" in self.config.parser.modules)
self.assertTrue("mod_ssl.c" in self.config.parser.modules)
self.assertTrue(mock_run_script.called)
def test_deploy_cert_enable_new_vhost(self):
# Create
ssl_vhost = self.config.make_vhost_ssl(self.vh_truth[0])
self.config.parser.modules.add("ssl_module")
self.config.parser.modules.add("mod_ssl.c")
self.assertFalse(ssl_vhost.enabled)
self.config.deploy_cert(
"encryption-example.demo", "example/cert.pem", "example/key.pem",
"example/cert_chain.pem", "example/fullchain.pem")
self.assertTrue(ssl_vhost.enabled)
# Make sure that we don't error out if symlink already exists
ssl_vhost.enabled = False
self.assertFalse(ssl_vhost.enabled)
self.config.deploy_cert(
"encryption-example.demo", "example/cert.pem", "example/key.pem",
"example/cert_chain.pem", "example/fullchain.pem")
self.assertTrue(ssl_vhost.enabled)
def test_enable_site_failure(self):
self.config.parser.root = "/tmp/nonexistent"
with mock.patch("certbot.compat.os.path.isdir") as mock_dir:
mock_dir.return_value = True
with mock.patch("certbot.compat.os.path.islink") as mock_link:
mock_link.return_value = False
self.assertRaises(
errors.NotSupportedError,
self.config.enable_site,
obj.VirtualHost("asdf", "afsaf", set(), False, False))
def test_deploy_cert_newssl(self):
self.config = util.get_apache_configurator(
self.config_path, self.vhost_path, self.config_dir,
self.work_dir, version=(2, 4, 16))
self.config = self.mock_deploy_cert(self.config)
self.config.parser.modules.add("ssl_module")
self.config.parser.modules.add("mod_ssl.c")
# Get the default 443 vhost
self.config.assoc["random.demo"] = self.vh_truth[1]
self.config.deploy_cert(
"random.demo", "example/cert.pem", "example/key.pem",
"example/cert_chain.pem", "example/fullchain.pem")
self.config.save()
# Verify ssl_module was enabled.
self.assertTrue(self.vh_truth[1].enabled)
self.assertTrue("ssl_module" in self.config.parser.modules)
loc_cert = self.config.parser.find_dir(
"sslcertificatefile", "example/fullchain.pem",
self.vh_truth[1].path)
loc_key = self.config.parser.find_dir(
"sslcertificateKeyfile", "example/key.pem", self.vh_truth[1].path)
# Verify one directive was found in the correct file
self.assertEqual(len(loc_cert), 1)
self.assertEqual(
apache_util.get_file_path(loc_cert[0]),
self.vh_truth[1].filep)
self.assertEqual(len(loc_key), 1)
self.assertEqual(
apache_util.get_file_path(loc_key[0]),
self.vh_truth[1].filep)
def test_deploy_cert_newssl_no_fullchain(self):
self.config = util.get_apache_configurator(
self.config_path, self.vhost_path, self.config_dir,
self.work_dir, version=(2, 4, 16))
self.config = self.mock_deploy_cert(self.config)
self.config.parser.modules.add("ssl_module")
self.config.parser.modules.add("mod_ssl.c")
# Get the default 443 vhost
self.config.assoc["random.demo"] = self.vh_truth[1]
self.assertRaises(errors.PluginError,
lambda: self.config.deploy_cert(
"random.demo", "example/cert.pem",
"example/key.pem"))
def test_deploy_cert_old_apache_no_chain(self):
self.config = util.get_apache_configurator(
self.config_path, self.vhost_path, self.config_dir,
self.work_dir, version=(2, 4, 7))
self.config = self.mock_deploy_cert(self.config)
self.config.parser.modules.add("ssl_module")
self.config.parser.modules.add("mod_ssl.c")
# Get the default 443 vhost
self.config.assoc["random.demo"] = self.vh_truth[1]
self.assertRaises(errors.PluginError,
lambda: self.config.deploy_cert(
"random.demo", "example/cert.pem",
"example/key.pem"))
@mock.patch("certbot.util.run_script")
@mock.patch("certbot.util.exe_exists")
def test_ocsp_stapling_enable_mod(self, mock_exe, _):
self.config.parser.update_runtime_variables = mock.Mock()
self.config.parser.modules.add("mod_ssl.c")
self.config.get_version = mock.Mock(return_value=(2, 4, 7))
mock_exe.return_value = True
# This will create an ssl vhost for certbot.demo
self.config.choose_vhost("certbot.demo")
self.config.enhance("certbot.demo", "staple-ocsp")
self.assertTrue("socache_shmcb_module" in self.config.parser.modules)
@mock.patch("certbot.util.run_script")
@mock.patch("certbot.util.exe_exists")
def test_ensure_http_header_enable_mod(self, mock_exe, _):
self.config.parser.update_runtime_variables = mock.Mock()
self.config.parser.modules.add("mod_ssl.c")
mock_exe.return_value = True
# This will create an ssl vhost for certbot.demo
self.config.choose_vhost("certbot.demo")
self.config.enhance("certbot.demo", "ensure-http-header",
"Strict-Transport-Security")
self.assertTrue("headers_module" in self.config.parser.modules)
@mock.patch("certbot.util.run_script")
@mock.patch("certbot.util.exe_exists")
def test_redirect_enable_mod(self, mock_exe, _):
self.config.parser.update_runtime_variables = mock.Mock()
mock_exe.return_value = True
self.config.get_version = mock.Mock(return_value=(2, 2))
# This will create an ssl vhost for certbot.demo
self.config.choose_vhost("certbot.demo")
self.config.enhance("certbot.demo", "redirect")
self.assertTrue("rewrite_module" in self.config.parser.modules)
def test_enable_site_already_enabled(self):
self.assertTrue(self.vh_truth[1].enabled)
self.config.enable_site(self.vh_truth[1])
def test_enable_site_call_parent(self):
with mock.patch(
"certbot_apache.configurator.ApacheConfigurator.enable_site") as e_s:
self.config.parser.root = "/tmp/nonexistent"
vh = self.vh_truth[0]
vh.enabled = False
self.config.enable_site(vh)
self.assertTrue(e_s.called)
@mock.patch("certbot.util.exe_exists")
def test_enable_mod_no_disable(self, mock_exe_exists):
mock_exe_exists.return_value = False
self.assertRaises(
errors.MisconfigurationError, self.config.enable_mod, "ssl")
if __name__ == "__main__":
unittest.main() # pragma: no cover
certbot-apache-0.39.0/certbot_apache/tests/util.py 0000644 0001750 0001750 00000024773 13544726630 022337 0 ustar erica erica 0000000 0000000 """Common utilities for certbot_apache."""
import shutil
import sys
import unittest
import augeas
import josepy as jose
import mock
import zope.component
from certbot.compat import os
from certbot.display import util as display_util
from certbot.plugins import common
from certbot.tests import util as test_util
from certbot_apache import configurator
from certbot_apache import entrypoint
from certbot_apache import obj
class ApacheTest(unittest.TestCase): # pylint: disable=too-few-public-methods
def setUp(self, test_dir="debian_apache_2_4/multiple_vhosts",
config_root="debian_apache_2_4/multiple_vhosts/apache2",
vhost_root="debian_apache_2_4/multiple_vhosts/apache2/sites-available"):
# pylint: disable=arguments-differ
super(ApacheTest, self).setUp()
self.temp_dir, self.config_dir, self.work_dir = common.dir_setup(
test_dir=test_dir,
pkg="certbot_apache.tests")
self.config_path = os.path.join(self.temp_dir, config_root)
self.vhost_path = os.path.join(self.temp_dir, vhost_root)
self.rsa512jwk = jose.JWKRSA.load(test_util.load_vector(
"rsa512_key.pem"))
self.config = get_apache_configurator(self.config_path, vhost_root,
self.config_dir, self.work_dir)
# Make sure all vhosts in sites-enabled are symlinks (Python packaging
# does not preserve symlinks)
sites_enabled = os.path.join(self.config_path, "sites-enabled")
if not os.path.exists(sites_enabled):
return
for vhost_basename in os.listdir(sites_enabled):
# Keep the one non-symlink test vhost in place
if vhost_basename == "non-symlink.conf":
continue
vhost = os.path.join(sites_enabled, vhost_basename)
if not os.path.islink(vhost): # pragma: no cover
os.remove(vhost)
target = os.path.join(
os.path.pardir, "sites-available", vhost_basename)
os.symlink(target, vhost)
def tearDown(self):
shutil.rmtree(self.temp_dir)
shutil.rmtree(self.config_dir)
shutil.rmtree(self.work_dir)
class ParserTest(ApacheTest):
def setUp(self, test_dir="debian_apache_2_4/multiple_vhosts",
config_root="debian_apache_2_4/multiple_vhosts/apache2",
vhost_root="debian_apache_2_4/multiple_vhosts/apache2/sites-available"):
super(ParserTest, self).setUp(test_dir, config_root, vhost_root)
zope.component.provideUtility(display_util.FileDisplay(sys.stdout,
False))
from certbot_apache.parser import ApacheParser
self.aug = augeas.Augeas(
flags=augeas.Augeas.NONE | augeas.Augeas.NO_MODL_AUTOLOAD)
with mock.patch("certbot_apache.parser.ApacheParser."
"update_runtime_variables"):
self.parser = ApacheParser(
self.config_path, self.vhost_path, configurator=self.config)
def get_apache_configurator( # pylint: disable=too-many-arguments, too-many-locals
config_path, vhost_path,
config_dir, work_dir, version=(2, 4, 7),
os_info="generic",
conf_vhost_path=None):
"""Create an Apache Configurator with the specified options.
:param conf: Function that returns binary paths. self.conf in Configurator
"""
backups = os.path.join(work_dir, "backups")
mock_le_config = mock.MagicMock(
apache_server_root=config_path,
apache_vhost_root=None,
apache_le_vhost_ext="-le-ssl.conf",
apache_challenge_location=config_path,
apache_enmod=None,
backup_dir=backups,
config_dir=config_dir,
http01_port=80,
temp_checkpoint_dir=os.path.join(work_dir, "temp_checkpoints"),
in_progress_dir=os.path.join(backups, "IN_PROGRESS"),
work_dir=work_dir)
with mock.patch("certbot_apache.configurator.util.run_script"):
with mock.patch("certbot_apache.configurator.util."
"exe_exists") as mock_exe_exists:
mock_exe_exists.return_value = True
with mock.patch("certbot_apache.parser.ApacheParser."
"update_runtime_variables"):
try:
config_class = entrypoint.OVERRIDE_CLASSES[os_info]
except KeyError:
config_class = configurator.ApacheConfigurator
config = config_class(config=mock_le_config, name="apache",
version=version)
if not conf_vhost_path:
config_class.OS_DEFAULTS["vhost_root"] = vhost_path
else:
# Custom virtualhost path was requested
config.config.apache_vhost_root = conf_vhost_path
config.config.apache_ctl = config_class.OS_DEFAULTS["ctl"]
config.prepare()
return config
def get_vh_truth(temp_dir, config_name):
"""Return the ground truth for the specified directory."""
if config_name == "debian_apache_2_4/multiple_vhosts":
prefix = os.path.join(
temp_dir, config_name, "apache2/sites-enabled")
aug_pre = "/files" + prefix
vh_truth = [
obj.VirtualHost(
os.path.join(prefix, "encryption-example.conf"),
os.path.join(aug_pre, "encryption-example.conf/Virtualhost"),
set([obj.Addr.fromstring("*:80")]),
False, True, "encryption-example.demo"),
obj.VirtualHost(
os.path.join(prefix, "default-ssl.conf"),
os.path.join(aug_pre,
"default-ssl.conf/IfModule/VirtualHost"),
set([obj.Addr.fromstring("_default_:443")]), True, True),
obj.VirtualHost(
os.path.join(prefix, "000-default.conf"),
os.path.join(aug_pre, "000-default.conf/VirtualHost"),
set([obj.Addr.fromstring("*:80"),
obj.Addr.fromstring("[::]:80")]),
False, True, "ip-172-30-0-17"),
obj.VirtualHost(
os.path.join(prefix, "certbot.conf"),
os.path.join(aug_pre, "certbot.conf/VirtualHost"),
set([obj.Addr.fromstring("*:80")]), False, True,
"certbot.demo", aliases=["www.certbot.demo"]),
obj.VirtualHost(
os.path.join(prefix, "mod_macro-example.conf"),
os.path.join(aug_pre,
"mod_macro-example.conf/Macro/VirtualHost"),
set([obj.Addr.fromstring("*:80")]), False, True,
modmacro=True),
obj.VirtualHost(
os.path.join(prefix, "default-ssl-port-only.conf"),
os.path.join(aug_pre, ("default-ssl-port-only.conf/"
"IfModule/VirtualHost")),
set([obj.Addr.fromstring("_default_:443")]), True, True),
obj.VirtualHost(
os.path.join(prefix, "wildcard.conf"),
os.path.join(aug_pre, "wildcard.conf/VirtualHost"),
set([obj.Addr.fromstring("*:80")]), False, True,
"ip-172-30-0-17", aliases=["*.blue.purple.com"]),
obj.VirtualHost(
os.path.join(prefix, "ocsp-ssl.conf"),
os.path.join(aug_pre, "ocsp-ssl.conf/IfModule/VirtualHost"),
set([obj.Addr.fromstring("10.2.3.4:443")]), True, True,
"ocspvhost.com"),
obj.VirtualHost(
os.path.join(prefix, "non-symlink.conf"),
os.path.join(aug_pre, "non-symlink.conf/VirtualHost"),
set([obj.Addr.fromstring("*:80")]), False, True,
"nonsym.link"),
obj.VirtualHost(
os.path.join(prefix, "default-ssl-port-only.conf"),
os.path.join(aug_pre,
"default-ssl-port-only.conf/VirtualHost"),
set([obj.Addr.fromstring("*:80")]), True, True, ""),
obj.VirtualHost(
os.path.join(temp_dir, config_name,
"apache2/apache2.conf"),
"/files" + os.path.join(temp_dir, config_name,
"apache2/apache2.conf/VirtualHost"),
set([obj.Addr.fromstring("*:80")]), False, True,
"vhost.in.rootconf"),
obj.VirtualHost(
os.path.join(prefix, "duplicatehttp.conf"),
os.path.join(aug_pre, "duplicatehttp.conf/VirtualHost"),
set([obj.Addr.fromstring("10.2.3.4:80")]), False, True,
"duplicate.example.com"),
obj.VirtualHost(
os.path.join(prefix, "duplicatehttps.conf"),
os.path.join(aug_pre, "duplicatehttps.conf/IfModule/VirtualHost"),
set([obj.Addr.fromstring("10.2.3.4:443")]), True, True,
"duplicate.example.com")]
return vh_truth
if config_name == "debian_apache_2_4/multi_vhosts":
prefix = os.path.join(
temp_dir, config_name, "apache2/sites-available")
aug_pre = "/files" + prefix
vh_truth = [
obj.VirtualHost(
os.path.join(prefix, "default.conf"),
os.path.join(aug_pre, "default.conf/VirtualHost[1]"),
set([obj.Addr.fromstring("*:80")]),
False, True, "ip-172-30-0-17"),
obj.VirtualHost(
os.path.join(prefix, "default.conf"),
os.path.join(aug_pre, "default.conf/VirtualHost[2]"),
set([obj.Addr.fromstring("*:80")]),
False, True, "banana.vomit.com"),
obj.VirtualHost(
os.path.join(prefix, "multi-vhost.conf"),
os.path.join(aug_pre, "multi-vhost.conf/VirtualHost[1]"),
set([obj.Addr.fromstring("*:80")]),
False, True, "1.multi.vhost.tld"),
obj.VirtualHost(
os.path.join(prefix, "multi-vhost.conf"),
os.path.join(aug_pre, "multi-vhost.conf/IfModule/VirtualHost"),
set([obj.Addr.fromstring("*:80")]),
False, True, "2.multi.vhost.tld"),
obj.VirtualHost(
os.path.join(prefix, "multi-vhost.conf"),
os.path.join(aug_pre, "multi-vhost.conf/VirtualHost[2]"),
set([obj.Addr.fromstring("*:80")]),
False, True, "3.multi.vhost.tld")]
return vh_truth
return None # pragma: no cover
certbot-apache-0.39.0/certbot_apache/tests/centos_test.py 0000644 0001750 0001750 00000020363 13544726630 023703 0 ustar erica erica 0000000 0000000 """Test for certbot_apache.configurator for Centos overrides"""
import unittest
import mock
from certbot import errors
from certbot.compat import filesystem
from certbot.compat import os
from certbot_apache import obj
from certbot_apache import override_centos
from certbot_apache.tests import util
def get_vh_truth(temp_dir, config_name):
"""Return the ground truth for the specified directory."""
prefix = os.path.join(
temp_dir, config_name, "httpd/conf.d")
aug_pre = "/files" + prefix
vh_truth = [
obj.VirtualHost(
os.path.join(prefix, "centos.example.com.conf"),
os.path.join(aug_pre, "centos.example.com.conf/VirtualHost"),
set([obj.Addr.fromstring("*:80")]),
False, True, "centos.example.com"),
obj.VirtualHost(
os.path.join(prefix, "ssl.conf"),
os.path.join(aug_pre, "ssl.conf/VirtualHost"),
set([obj.Addr.fromstring("_default_:443")]),
True, True, None)
]
return vh_truth
class FedoraRestartTest(util.ApacheTest):
"""Tests for Fedora specific self-signed certificate override"""
def setUp(self): # pylint: disable=arguments-differ
test_dir = "centos7_apache/apache"
config_root = "centos7_apache/apache/httpd"
vhost_root = "centos7_apache/apache/httpd/conf.d"
super(FedoraRestartTest, self).setUp(test_dir=test_dir,
config_root=config_root,
vhost_root=vhost_root)
self.config = util.get_apache_configurator(
self.config_path, self.vhost_path, self.config_dir, self.work_dir,
os_info="fedora_old")
self.vh_truth = get_vh_truth(
self.temp_dir, "centos7_apache/apache")
def _run_fedora_test(self):
self.assertIsInstance(self.config, override_centos.CentOSConfigurator)
with mock.patch("certbot.util.get_os_info") as mock_info:
mock_info.return_value = ["fedora", "28"]
self.config.config_test()
def test_non_fedora_error(self):
c_test = "certbot_apache.configurator.ApacheConfigurator.config_test"
with mock.patch(c_test) as mock_test:
mock_test.side_effect = errors.MisconfigurationError
with mock.patch("certbot.util.get_os_info") as mock_info:
mock_info.return_value = ["not_fedora"]
self.assertRaises(errors.MisconfigurationError,
self.config.config_test)
def test_fedora_restart_error(self):
c_test = "certbot_apache.configurator.ApacheConfigurator.config_test"
with mock.patch(c_test) as mock_test:
# First call raises error, second doesn't
mock_test.side_effect = [errors.MisconfigurationError, '']
with mock.patch("certbot.util.run_script") as mock_run:
mock_run.side_effect = errors.SubprocessError
self.assertRaises(errors.MisconfigurationError,
self._run_fedora_test)
def test_fedora_restart(self):
c_test = "certbot_apache.configurator.ApacheConfigurator.config_test"
with mock.patch(c_test) as mock_test:
with mock.patch("certbot.util.run_script") as mock_run:
# First call raises error, second doesn't
mock_test.side_effect = [errors.MisconfigurationError, '']
self._run_fedora_test()
self.assertEqual(mock_test.call_count, 2)
self.assertEqual(mock_run.call_args[0][0],
['systemctl', 'restart', 'httpd'])
class MultipleVhostsTestCentOS(util.ApacheTest):
"""Multiple vhost tests for CentOS / RHEL family of distros"""
_multiprocess_can_split_ = True
def setUp(self): # pylint: disable=arguments-differ
test_dir = "centos7_apache/apache"
config_root = "centos7_apache/apache/httpd"
vhost_root = "centos7_apache/apache/httpd/conf.d"
super(MultipleVhostsTestCentOS, self).setUp(test_dir=test_dir,
config_root=config_root,
vhost_root=vhost_root)
self.config = util.get_apache_configurator(
self.config_path, self.vhost_path, self.config_dir, self.work_dir,
os_info="centos")
self.vh_truth = get_vh_truth(
self.temp_dir, "centos7_apache/apache")
def test_get_parser(self):
self.assertIsInstance(self.config.parser, override_centos.CentOSParser)
@mock.patch("certbot_apache.parser.ApacheParser._get_runtime_cfg")
def test_opportunistic_httpd_runtime_parsing(self, mock_get):
define_val = (
'Define: TEST1\n'
'Define: TEST2\n'
'Define: DUMP_RUN_CFG\n'
)
mod_val = (
'Loaded Modules:\n'
' mock_module (static)\n'
' another_module (static)\n'
)
def mock_get_cfg(command):
"""Mock httpd process stdout"""
if command == ['apachectl', '-t', '-D', 'DUMP_RUN_CFG']:
return define_val
elif command == ['apachectl', '-t', '-D', 'DUMP_MODULES']:
return mod_val
return ""
mock_get.side_effect = mock_get_cfg
self.config.parser.modules = set()
self.config.parser.variables = {}
with mock.patch("certbot.util.get_os_info") as mock_osi:
# Make sure we have the have the CentOS httpd constants
mock_osi.return_value = ("centos", "7")
self.config.parser.update_runtime_variables()
self.assertEqual(mock_get.call_count, 3)
self.assertEqual(len(self.config.parser.modules), 4)
self.assertEqual(len(self.config.parser.variables), 2)
self.assertTrue("TEST2" in self.config.parser.variables.keys())
self.assertTrue("mod_another.c" in self.config.parser.modules)
def test_get_virtual_hosts(self):
"""Make sure all vhosts are being properly found."""
vhs = self.config.get_virtual_hosts()
self.assertEqual(len(vhs), 2)
found = 0
for vhost in vhs:
for centos_truth in self.vh_truth:
if vhost == centos_truth:
found += 1
break
else:
raise Exception("Missed: %s" % vhost) # pragma: no cover
self.assertEqual(found, 2)
@mock.patch("certbot_apache.parser.ApacheParser._get_runtime_cfg")
def test_get_sysconfig_vars(self, mock_cfg):
"""Make sure we read the sysconfig OPTIONS variable correctly"""
# Return nothing for the process calls
mock_cfg.return_value = ""
self.config.parser.sysconfig_filep = filesystem.realpath(
os.path.join(self.config.parser.root, "../sysconfig/httpd"))
self.config.parser.variables = {}
with mock.patch("certbot.util.get_os_info") as mock_osi:
# Make sure we have the have the CentOS httpd constants
mock_osi.return_value = ("centos", "7")
self.config.parser.update_runtime_variables()
self.assertTrue("mock_define" in self.config.parser.variables.keys())
self.assertTrue("mock_define_too" in self.config.parser.variables.keys())
self.assertTrue("mock_value" in self.config.parser.variables.keys())
self.assertEqual("TRUE", self.config.parser.variables["mock_value"])
self.assertTrue("MOCK_NOSEP" in self.config.parser.variables.keys())
self.assertEqual("NOSEP_VAL", self.config.parser.variables["NOSEP_TWO"])
@mock.patch("certbot_apache.configurator.util.run_script")
def test_alt_restart_works(self, mock_run_script):
mock_run_script.side_effect = [None, errors.SubprocessError, None]
self.config.restart()
self.assertEqual(mock_run_script.call_count, 3)
@mock.patch("certbot_apache.configurator.util.run_script")
def test_alt_restart_errors(self, mock_run_script):
mock_run_script.side_effect = [None,
errors.SubprocessError,
errors.SubprocessError]
self.assertRaises(errors.MisconfigurationError, self.config.restart)
if __name__ == "__main__":
unittest.main() # pragma: no cover
certbot-apache-0.39.0/certbot_apache/tests/configurator_test.py 0000644 0001750 0001750 00000226511 13544726630 025115 0 ustar erica erica 0000000 0000000 # pylint: disable=too-many-public-methods,too-many-lines
"""Test for certbot_apache.configurator."""
import copy
import shutil
import socket
import tempfile
import unittest
import mock
# six is used in mock.patch()
import six # pylint: disable=unused-import
from acme import challenges
from certbot import achallenges
from certbot import crypto_util
from certbot import errors
from certbot.compat import os
from certbot.compat import filesystem
from certbot.tests import acme_util
from certbot.tests import util as certbot_util
from certbot_apache import apache_util
from certbot_apache import constants
from certbot_apache import obj
from certbot_apache import parser
from certbot_apache.tests import util
class MultipleVhostsTest(util.ApacheTest):
"""Test two standard well-configured HTTP vhosts."""
def setUp(self): # pylint: disable=arguments-differ
super(MultipleVhostsTest, self).setUp()
self.config = util.get_apache_configurator(
self.config_path, self.vhost_path, self.config_dir, self.work_dir)
self.config = self.mock_deploy_cert(self.config)
self.vh_truth = util.get_vh_truth(
self.temp_dir, "debian_apache_2_4/multiple_vhosts")
def mock_deploy_cert(self, config):
"""A test for a mock deploy cert"""
config.real_deploy_cert = self.config.deploy_cert
def mocked_deploy_cert(*args, **kwargs):
"""a helper to mock a deployed cert"""
g_mod = "certbot_apache.configurator.ApacheConfigurator.enable_mod"
with mock.patch(g_mod):
config.real_deploy_cert(*args, **kwargs)
self.config.deploy_cert = mocked_deploy_cert
return self.config
@mock.patch("certbot_apache.configurator.path_surgery")
def test_prepare_no_install(self, mock_surgery):
silly_path = {"PATH": "/tmp/nothingness2342"}
mock_surgery.return_value = False
with mock.patch.dict('os.environ', silly_path):
self.assertRaises(errors.NoInstallationError, self.config.prepare)
self.assertEqual(mock_surgery.call_count, 1)
@mock.patch("certbot_apache.parser.ApacheParser")
@mock.patch("certbot_apache.configurator.util.exe_exists")
def test_prepare_version(self, mock_exe_exists, _):
mock_exe_exists.return_value = True
self.config.version = None
self.config.config_test = mock.Mock()
self.config.get_version = mock.Mock(return_value=(1, 1))
self.assertRaises(
errors.NotSupportedError, self.config.prepare)
def test_prepare_locked(self):
server_root = self.config.conf("server-root")
self.config.config_test = mock.Mock()
os.remove(os.path.join(server_root, ".certbot.lock"))
certbot_util.lock_and_call(self._test_prepare_locked, server_root)
@mock.patch("certbot_apache.parser.ApacheParser")
@mock.patch("certbot_apache.configurator.util.exe_exists")
def _test_prepare_locked(self, unused_parser, unused_exe_exists):
try:
self.config.prepare()
except errors.PluginError as err:
err_msg = str(err)
self.assertTrue("lock" in err_msg)
self.assertTrue(self.config.conf("server-root") in err_msg)
else: # pragma: no cover
self.fail("Exception wasn't raised!")
def test_add_parser_arguments(self): # pylint: disable=no-self-use
from certbot_apache.configurator import ApacheConfigurator
# Weak test..
ApacheConfigurator.add_parser_arguments(mock.MagicMock())
def test_docs_parser_arguments(self):
os.environ["CERTBOT_DOCS"] = "1"
from certbot_apache.configurator import ApacheConfigurator
mock_add = mock.MagicMock()
ApacheConfigurator.add_parser_arguments(mock_add)
parserargs = ["server_root", "enmod", "dismod", "le_vhost_ext",
"vhost_root", "logs_root", "challenge_location",
"handle_modules", "handle_sites", "ctl"]
exp = dict()
for k in ApacheConfigurator.OS_DEFAULTS:
if k in parserargs:
exp[k.replace("_", "-")] = ApacheConfigurator.OS_DEFAULTS[k]
# Special cases
exp["vhost-root"] = None
exp["init-script"] = None
found = set()
for call in mock_add.call_args_list:
# init-script is a special case: deprecated argument
if call[0][0] != "init-script":
self.assertEqual(exp[call[0][0]], call[1]['default'])
found.add(call[0][0])
# Make sure that all (and only) the expected values exist
self.assertEqual(len(mock_add.call_args_list), len(found))
for e in exp:
self.assertTrue(e in found)
del os.environ["CERTBOT_DOCS"]
def test_add_parser_arguments_all_configurators(self): # pylint: disable=no-self-use
from certbot_apache.entrypoint import OVERRIDE_CLASSES
for cls in OVERRIDE_CLASSES.values():
cls.add_parser_arguments(mock.MagicMock())
def test_all_configurators_defaults_defined(self):
from certbot_apache.entrypoint import OVERRIDE_CLASSES
from certbot_apache.configurator import ApacheConfigurator
parameters = set(ApacheConfigurator.OS_DEFAULTS.keys())
for cls in OVERRIDE_CLASSES.values():
self.assertTrue(parameters.issubset(set(cls.OS_DEFAULTS.keys())))
def test_constant(self):
self.assertTrue("debian_apache_2_4/multiple_vhosts/apache" in
self.config.option("server_root"))
self.assertEqual(self.config.option("nonexistent"), None)
@certbot_util.patch_get_utility()
def test_get_all_names(self, mock_getutility):
mock_utility = mock_getutility()
mock_utility.notification = mock.MagicMock(return_value=True)
names = self.config.get_all_names()
self.assertEqual(names, set(
["certbot.demo", "ocspvhost.com", "encryption-example.demo",
"nonsym.link", "vhost.in.rootconf", "www.certbot.demo",
"duplicate.example.com"]
))
@certbot_util.patch_get_utility()
@mock.patch("certbot_apache.configurator.socket.gethostbyaddr")
def test_get_all_names_addrs(self, mock_gethost, mock_getutility):
mock_gethost.side_effect = [("google.com", "", ""), socket.error]
mock_utility = mock_getutility()
mock_utility.notification.return_value = True
vhost = obj.VirtualHost(
"fp", "ap",
set([obj.Addr(("8.8.8.8", "443")),
obj.Addr(("zombo.com",)),
obj.Addr(("192.168.1.2"))]),
True, False)
self.config.vhosts.append(vhost)
names = self.config.get_all_names()
self.assertEqual(len(names), 9)
self.assertTrue("zombo.com" in names)
self.assertTrue("google.com" in names)
self.assertTrue("certbot.demo" in names)
def test_get_bad_path(self):
self.assertEqual(apache_util.get_file_path(None), None)
self.assertEqual(apache_util.get_file_path("nonexistent"), None)
self.assertEqual(self.config._create_vhost("nonexistent"), None) # pylint: disable=protected-access
def test_get_aug_internal_path(self):
from certbot_apache.apache_util import get_internal_aug_path
internal_paths = [
"Virtualhost", "IfModule/VirtualHost", "VirtualHost", "VirtualHost",
"Macro/VirtualHost", "IfModule/VirtualHost", "VirtualHost",
"IfModule/VirtualHost"]
for i, internal_path in enumerate(internal_paths):
self.assertEqual(
get_internal_aug_path(self.vh_truth[i].path), internal_path)
def test_bad_servername_alias(self):
ssl_vh1 = obj.VirtualHost(
"fp1", "ap1", set([obj.Addr(("*", "443"))]),
True, False)
# pylint: disable=protected-access
self.config._add_servernames(ssl_vh1)
self.assertTrue(
self.config._add_servername_alias("oy_vey", ssl_vh1) is None)
def test_add_servernames_alias(self):
self.config.parser.add_dir(
self.vh_truth[2].path, "ServerAlias", ["*.le.co"])
# pylint: disable=protected-access
self.config._add_servernames(self.vh_truth[2])
self.assertEqual(
self.vh_truth[2].get_names(), set(["*.le.co", "ip-172-30-0-17"]))
def test_get_virtual_hosts(self):
"""Make sure all vhosts are being properly found."""
vhs = self.config.get_virtual_hosts()
self.assertEqual(len(vhs), 12)
found = 0
for vhost in vhs:
for truth in self.vh_truth:
if vhost == truth:
found += 1
break
else:
raise Exception("Missed: %s" % vhost) # pragma: no cover
self.assertEqual(found, 12)
# Handle case of non-debian layout get_virtual_hosts
with mock.patch(
"certbot_apache.configurator.ApacheConfigurator.conf"
) as mock_conf:
mock_conf.return_value = False
vhs = self.config.get_virtual_hosts()
self.assertEqual(len(vhs), 12)
@mock.patch("certbot_apache.display_ops.select_vhost")
def test_choose_vhost_none_avail(self, mock_select):
mock_select.return_value = None
self.assertRaises(
errors.PluginError, self.config.choose_vhost, "none.com")
@mock.patch("certbot_apache.display_ops.select_vhost")
def test_choose_vhost_select_vhost_ssl(self, mock_select):
mock_select.return_value = self.vh_truth[1]
self.assertEqual(
self.vh_truth[1], self.config.choose_vhost("none.com"))
@mock.patch("certbot_apache.display_ops.select_vhost")
@mock.patch("certbot_apache.obj.VirtualHost.conflicts")
def test_choose_vhost_select_vhost_non_ssl(self, mock_conf, mock_select):
mock_select.return_value = self.vh_truth[0]
mock_conf.return_value = False
chosen_vhost = self.config.choose_vhost("none.com")
self.vh_truth[0].aliases.add("none.com")
self.assertEqual(
self.vh_truth[0].get_names(), chosen_vhost.get_names())
# Make sure we go from HTTP -> HTTPS
self.assertFalse(self.vh_truth[0].ssl)
self.assertTrue(chosen_vhost.ssl)
@mock.patch("certbot_apache.configurator.ApacheConfigurator._find_best_vhost")
@mock.patch("certbot_apache.parser.ApacheParser.add_dir")
def test_choose_vhost_and_servername_addition(self, mock_add, mock_find):
ret_vh = self.vh_truth[8]
ret_vh.enabled = False
mock_find.return_value = self.vh_truth[8]
self.config.choose_vhost("whatever.com")
self.assertTrue(mock_add.called)
@mock.patch("certbot_apache.display_ops.select_vhost")
def test_choose_vhost_select_vhost_with_temp(self, mock_select):
mock_select.return_value = self.vh_truth[0]
chosen_vhost = self.config.choose_vhost("none.com", create_if_no_ssl=False)
self.assertEqual(self.vh_truth[0], chosen_vhost)
@mock.patch("certbot_apache.display_ops.select_vhost")
def test_choose_vhost_select_vhost_conflicting_non_ssl(self, mock_select):
mock_select.return_value = self.vh_truth[3]
conflicting_vhost = obj.VirtualHost(
"path", "aug_path", set([obj.Addr.fromstring("*:443")]),
True, True)
self.config.vhosts.append(conflicting_vhost)
self.assertRaises(
errors.PluginError, self.config.choose_vhost, "none.com")
def test_find_best_http_vhost_default(self):
vh = obj.VirtualHost(
"fp", "ap", set([obj.Addr.fromstring("_default_:80")]), False, True)
self.config.vhosts = [vh]
self.assertEqual(self.config.find_best_http_vhost("foo.bar", False), vh)
def test_find_best_http_vhost_port(self):
port = "8080"
vh = obj.VirtualHost(
"fp", "ap", set([obj.Addr.fromstring("*:" + port)]),
False, True, "encryption-example.demo")
self.config.vhosts.append(vh)
self.assertEqual(self.config.find_best_http_vhost("foo.bar", False, port), vh)
def test_findbest_continues_on_short_domain(self):
# pylint: disable=protected-access
chosen_vhost = self.config._find_best_vhost("purple.com")
self.assertEqual(None, chosen_vhost)
def test_findbest_continues_on_long_domain(self):
# pylint: disable=protected-access
chosen_vhost = self.config._find_best_vhost("green.red.purple.com")
self.assertEqual(None, chosen_vhost)
def test_find_best_vhost(self):
# pylint: disable=protected-access
self.assertEqual(
self.vh_truth[3], self.config._find_best_vhost("certbot.demo"))
self.assertEqual(
self.vh_truth[0],
self.config._find_best_vhost("encryption-example.demo"))
self.assertEqual(
self.config._find_best_vhost("does-not-exist.com"), None)
def test_find_best_vhost_variety(self):
# pylint: disable=protected-access
ssl_vh = obj.VirtualHost(
"fp", "ap", set([obj.Addr(("*", "443")),
obj.Addr(("zombo.com",))]),
True, False)
self.config.vhosts.append(ssl_vh)
self.assertEqual(self.config._find_best_vhost("zombo.com"), ssl_vh)
def test_find_best_vhost_default(self):
# pylint: disable=protected-access
# Assume only the two default vhosts.
self.config.vhosts = [
vh for vh in self.config.vhosts
if vh.name not in ["certbot.demo", "nonsym.link",
"encryption-example.demo", "duplicate.example.com",
"ocspvhost.com", "vhost.in.rootconf"]
and "*.blue.purple.com" not in vh.aliases
]
self.assertEqual(
self.config._find_best_vhost("encryption-example.demo"),
self.vh_truth[2])
def test_non_default_vhosts(self):
# pylint: disable=protected-access
vhosts = self.config._non_default_vhosts(self.config.vhosts)
self.assertEqual(len(vhosts), 10)
def test_deploy_cert_enable_new_vhost(self):
# Create
ssl_vhost = self.config.make_vhost_ssl(self.vh_truth[0])
self.config.parser.modules.add("ssl_module")
self.config.parser.modules.add("mod_ssl.c")
self.config.parser.modules.add("socache_shmcb_module")
self.assertFalse(ssl_vhost.enabled)
self.config.deploy_cert(
"encryption-example.demo", "example/cert.pem", "example/key.pem",
"example/cert_chain.pem", "example/fullchain.pem")
self.assertTrue(ssl_vhost.enabled)
def test_no_duplicate_include(self):
def mock_find_dir(directive, argument, _):
"""Mock method for parser.find_dir"""
if directive == "Include" and argument.endswith("options-ssl-apache.conf"):
return ["/path/to/whatever"]
return None # pragma: no cover
mock_add = mock.MagicMock()
self.config.parser.add_dir = mock_add
self.config._add_dummy_ssl_directives(self.vh_truth[0]) # pylint: disable=protected-access
tried_to_add = False
for a in mock_add.call_args_list:
if a[0][1] == "Include" and a[0][2] == self.config.mod_ssl_conf:
tried_to_add = True
# Include should be added, find_dir is not patched, and returns falsy
self.assertTrue(tried_to_add)
self.config.parser.find_dir = mock_find_dir
mock_add.reset_mock()
self.config._add_dummy_ssl_directives(self.vh_truth[0]) # pylint: disable=protected-access
for a in mock_add.call_args_list:
if a[0][1] == "Include" and a[0][2] == self.config.mod_ssl_conf:
self.fail("Include shouldn't be added, as patched find_dir 'finds' existing one") \
# pragma: no cover
def test_deploy_cert(self):
self.config.parser.modules.add("ssl_module")
self.config.parser.modules.add("mod_ssl.c")
self.config.parser.modules.add("socache_shmcb_module")
# Patch _add_dummy_ssl_directives to make sure we write them correctly
# pylint: disable=protected-access
orig_add_dummy = self.config._add_dummy_ssl_directives
def mock_add_dummy_ssl(vhostpath):
"""Mock method for _add_dummy_ssl_directives"""
def find_args(path, directive):
"""Return list of arguments in requested directive at path"""
f_args = []
dirs = self.config.parser.find_dir(directive, None,
path)
for d in dirs:
f_args.append(self.config.parser.get_arg(d))
return f_args
# Verify that the dummy directives do not exist
self.assertFalse(
"insert_cert_file_path" in find_args(vhostpath,
"SSLCertificateFile"))
self.assertFalse(
"insert_key_file_path" in find_args(vhostpath,
"SSLCertificateKeyFile"))
orig_add_dummy(vhostpath)
# Verify that the dummy directives exist
self.assertTrue(
"insert_cert_file_path" in find_args(vhostpath,
"SSLCertificateFile"))
self.assertTrue(
"insert_key_file_path" in find_args(vhostpath,
"SSLCertificateKeyFile"))
# pylint: disable=protected-access
self.config._add_dummy_ssl_directives = mock_add_dummy_ssl
# Get the default 443 vhost
self.config.assoc["random.demo"] = self.vh_truth[1]
self.config.deploy_cert(
"random.demo",
"example/cert.pem", "example/key.pem", "example/cert_chain.pem")
self.config.save()
# Verify ssl_module was enabled.
self.assertTrue(self.vh_truth[1].enabled)
self.assertTrue("ssl_module" in self.config.parser.modules)
loc_cert = self.config.parser.find_dir(
"sslcertificatefile", "example/cert.pem", self.vh_truth[1].path)
loc_key = self.config.parser.find_dir(
"sslcertificateKeyfile", "example/key.pem", self.vh_truth[1].path)
loc_chain = self.config.parser.find_dir(
"SSLCertificateChainFile", "example/cert_chain.pem",
self.vh_truth[1].path)
# Verify one directive was found in the correct file
self.assertEqual(len(loc_cert), 1)
self.assertEqual(
apache_util.get_file_path(loc_cert[0]),
self.vh_truth[1].filep)
self.assertEqual(len(loc_key), 1)
self.assertEqual(
apache_util.get_file_path(loc_key[0]),
self.vh_truth[1].filep)
self.assertEqual(len(loc_chain), 1)
self.assertEqual(
apache_util.get_file_path(loc_chain[0]),
self.vh_truth[1].filep)
# One more time for chain directive setting
self.config.deploy_cert(
"random.demo",
"two/cert.pem", "two/key.pem", "two/cert_chain.pem")
self.assertTrue(self.config.parser.find_dir(
"SSLCertificateChainFile", "two/cert_chain.pem",
self.vh_truth[1].path))
def test_deploy_cert_invalid_vhost(self):
"""For test cases where the `ApacheConfigurator` class' `_deploy_cert`
method is called with an invalid vhost parameter. Currently this tests
that a PluginError is appropriately raised when important directives
are missing in an SSL module."""
self.config.parser.modules.add("ssl_module")
self.config.parser.modules.add("mod_ssl.c")
self.config.parser.modules.add("socache_shmcb_module")
def side_effect(*args):
"""Mocks case where an SSLCertificateFile directive can be found
but an SSLCertificateKeyFile directive is missing."""
if "SSLCertificateFile" in args:
return ["example/cert.pem"]
return []
mock_find_dir = mock.MagicMock(return_value=[])
mock_find_dir.side_effect = side_effect
self.config.parser.find_dir = mock_find_dir
# Get the default 443 vhost
self.config.assoc["random.demo"] = self.vh_truth[1]
self.assertRaises(
errors.PluginError, self.config.deploy_cert, "random.demo",
"example/cert.pem", "example/key.pem", "example/cert_chain.pem")
# Remove side_effect to mock case where both SSLCertificateFile
# and SSLCertificateKeyFile directives are missing
self.config.parser.find_dir.side_effect = None
self.assertRaises(
errors.PluginError, self.config.deploy_cert, "random.demo",
"example/cert.pem", "example/key.pem", "example/cert_chain.pem")
def test_is_name_vhost(self):
addr = obj.Addr.fromstring("*:80")
self.assertTrue(self.config.is_name_vhost(addr))
self.config.version = (2, 2)
self.assertFalse(self.config.is_name_vhost(addr))
def test_add_name_vhost(self):
self.config.add_name_vhost(obj.Addr.fromstring("*:443"))
self.config.add_name_vhost(obj.Addr.fromstring("*:80"))
self.assertTrue(self.config.parser.find_dir(
"NameVirtualHost", "*:443", exclude=False))
self.assertTrue(self.config.parser.find_dir(
"NameVirtualHost", "*:80"))
def test_add_listen_80(self):
mock_find = mock.Mock()
mock_add_dir = mock.Mock()
mock_find.return_value = []
self.config.parser.find_dir = mock_find
self.config.parser.add_dir = mock_add_dir
self.config.ensure_listen("80")
self.assertTrue(mock_add_dir.called)
self.assertTrue(mock_find.called)
self.assertEqual(mock_add_dir.call_args[0][1], "Listen")
self.assertEqual(mock_add_dir.call_args[0][2], "80")
def test_add_listen_80_named(self):
mock_find = mock.Mock()
mock_find.return_value = ["test1", "test2", "test3"]
mock_get = mock.Mock()
mock_get.side_effect = ["1.2.3.4:80", "[::1]:80", "1.1.1.1:443"]
mock_add_dir = mock.Mock()
self.config.parser.find_dir = mock_find
self.config.parser.get_arg = mock_get
self.config.parser.add_dir = mock_add_dir
self.config.ensure_listen("80")
self.assertEqual(mock_add_dir.call_count, 0)
# Reset return lists and inputs
mock_add_dir.reset_mock()
mock_get.side_effect = ["1.2.3.4:80", "[::1]:80", "1.1.1.1:443"]
# Test
self.config.ensure_listen("8080")
self.assertEqual(mock_add_dir.call_count, 3)
self.assertTrue(mock_add_dir.called)
self.assertEqual(mock_add_dir.call_args[0][1], "Listen")
call_found = False
for mock_call in mock_add_dir.mock_calls:
if mock_call[1][2] == ['1.2.3.4:8080']:
call_found = True
self.assertTrue(call_found)
def test_prepare_server_https(self):
mock_enable = mock.Mock()
self.config.enable_mod = mock_enable
mock_find = mock.Mock()
mock_add_dir = mock.Mock()
mock_find.return_value = []
# This will test the Add listen
self.config.parser.find_dir = mock_find
self.config.parser.add_dir_to_ifmodssl = mock_add_dir
self.config.prepare_server_https("443")
# Changing the order these modules are enabled breaks the reverter
self.assertEqual(mock_enable.call_args_list[0][0][0], "socache_shmcb")
self.assertEqual(mock_enable.call_args[0][0], "ssl")
self.assertEqual(mock_enable.call_args[1], {"temp": False})
self.config.prepare_server_https("8080", temp=True)
# Changing the order these modules are enabled breaks the reverter
self.assertEqual(mock_enable.call_args_list[2][0][0], "socache_shmcb")
self.assertEqual(mock_enable.call_args[0][0], "ssl")
# Enable mod is temporary
self.assertEqual(mock_enable.call_args[1], {"temp": True})
self.assertEqual(mock_add_dir.call_count, 2)
def test_prepare_server_https_named_listen(self):
mock_find = mock.Mock()
mock_find.return_value = ["test1", "test2", "test3"]
mock_get = mock.Mock()
mock_get.side_effect = ["1.2.3.4:80", "[::1]:80", "1.1.1.1:443"]
mock_add_dir = mock.Mock()
mock_enable = mock.Mock()
self.config.parser.find_dir = mock_find
self.config.parser.get_arg = mock_get
self.config.parser.add_dir_to_ifmodssl = mock_add_dir
self.config.enable_mod = mock_enable
# Test Listen statements with specific ip listeed
self.config.prepare_server_https("443")
# Should be 0 as one interface already listens to 443
self.assertEqual(mock_add_dir.call_count, 0)
# Reset return lists and inputs
mock_add_dir.reset_mock()
mock_get.side_effect = ["1.2.3.4:80", "[::1]:80", "1.1.1.1:443"]
# Test
self.config.prepare_server_https("8080", temp=True)
self.assertEqual(mock_add_dir.call_count, 3)
call_args_list = [mock_add_dir.call_args_list[i][0][2] for i in range(3)]
self.assertEqual(
sorted(call_args_list),
sorted([["1.2.3.4:8080", "https"],
["[::1]:8080", "https"],
["1.1.1.1:8080", "https"]]))
# mock_get.side_effect = ["1.2.3.4:80", "[::1]:80"]
# mock_find.return_value = ["test1", "test2", "test3"]
# self.config.parser.get_arg = mock_get
# self.config.prepare_server_https("8080", temp=True)
# self.assertEqual(self.listens, 0)
def test_prepare_server_https_needed_listen(self):
mock_find = mock.Mock()
mock_find.return_value = ["test1", "test2"]
mock_get = mock.Mock()
mock_get.side_effect = ["1.2.3.4:8080", "80"]
mock_add_dir = mock.Mock()
mock_enable = mock.Mock()
self.config.parser.find_dir = mock_find
self.config.parser.get_arg = mock_get
self.config.parser.add_dir_to_ifmodssl = mock_add_dir
self.config.enable_mod = mock_enable
self.config.prepare_server_https("443")
self.assertEqual(mock_add_dir.call_count, 1)
def test_prepare_server_https_mixed_listen(self):
mock_find = mock.Mock()
mock_find.return_value = ["test1", "test2"]
mock_get = mock.Mock()
mock_get.side_effect = ["1.2.3.4:8080", "443"]
mock_add_dir = mock.Mock()
mock_enable = mock.Mock()
self.config.parser.find_dir = mock_find
self.config.parser.get_arg = mock_get
self.config.parser.add_dir_to_ifmodssl = mock_add_dir
self.config.enable_mod = mock_enable
# Test Listen statements with specific ip listeed
self.config.prepare_server_https("443")
# Should only be 2 here, as the third interface
# already listens to the correct port
self.assertEqual(mock_add_dir.call_count, 0)
def test_make_vhost_ssl_with_mock_span(self):
# span excludes the closing tag in older versions
# of Augeas
return_value = [self.vh_truth[0].filep, 1, 12, 0, 0, 0, 1142]
with mock.patch.object(self.config.parser.aug, 'span') as mock_span:
mock_span.return_value = return_value
self.test_make_vhost_ssl()
def test_make_vhost_ssl_with_mock_span2(self):
# span includes the closing tag in newer versions
# of Augeas
return_value = [self.vh_truth[0].filep, 1, 12, 0, 0, 0, 1157]
with mock.patch.object(self.config.parser.aug, 'span') as mock_span:
mock_span.return_value = return_value
self.test_make_vhost_ssl()
def test_make_vhost_ssl_nonsymlink(self):
ssl_vhost_slink = self.config.make_vhost_ssl(self.vh_truth[8])
self.assertTrue(ssl_vhost_slink.ssl)
self.assertTrue(ssl_vhost_slink.enabled)
self.assertEqual(ssl_vhost_slink.name, "nonsym.link")
def test_make_vhost_ssl_nonexistent_vhost_path(self):
ssl_vhost = self.config.make_vhost_ssl(self.vh_truth[1])
self.assertEqual(os.path.dirname(ssl_vhost.filep),
os.path.dirname(filesystem.realpath(self.vh_truth[1].filep)))
def test_make_vhost_ssl(self):
ssl_vhost = self.config.make_vhost_ssl(self.vh_truth[0])
self.assertEqual(
ssl_vhost.filep,
os.path.join(self.config_path, "sites-available",
"encryption-example-le-ssl.conf"))
self.assertEqual(ssl_vhost.path,
"/files" + ssl_vhost.filep + "/IfModule/Virtualhost")
self.assertEqual(len(ssl_vhost.addrs), 1)
self.assertEqual(set([obj.Addr.fromstring("*:443")]), ssl_vhost.addrs)
self.assertEqual(ssl_vhost.name, "encryption-example.demo")
self.assertTrue(ssl_vhost.ssl)
self.assertFalse(ssl_vhost.enabled)
self.assertEqual(self.config.is_name_vhost(self.vh_truth[0]),
self.config.is_name_vhost(ssl_vhost))
self.assertEqual(len(self.config.vhosts), 13)
def test_clean_vhost_ssl(self):
# pylint: disable=protected-access
for directive in ["SSLCertificateFile", "SSLCertificateKeyFile",
"SSLCertificateChainFile", "SSLCACertificatePath"]:
for _ in range(10):
self.config.parser.add_dir(self.vh_truth[1].path,
directive, ["bogus"])
self.config.save()
self.config._clean_vhost(self.vh_truth[1])
self.config.save()
loc_cert = self.config.parser.find_dir(
'SSLCertificateFile', None, self.vh_truth[1].path, False)
loc_key = self.config.parser.find_dir(
'SSLCertificateKeyFile', None, self.vh_truth[1].path, False)
loc_chain = self.config.parser.find_dir(
'SSLCertificateChainFile', None, self.vh_truth[1].path, False)
loc_cacert = self.config.parser.find_dir(
'SSLCACertificatePath', None, self.vh_truth[1].path, False)
self.assertEqual(len(loc_cert), 1)
self.assertEqual(len(loc_key), 1)
self.assertEqual(len(loc_chain), 0)
self.assertEqual(len(loc_cacert), 10)
def test_deduplicate_directives(self):
# pylint: disable=protected-access
DIRECTIVE = "Foo"
for _ in range(10):
self.config.parser.add_dir(self.vh_truth[1].path,
DIRECTIVE, ["bar"])
self.config.save()
self.config._deduplicate_directives(self.vh_truth[1].path, [DIRECTIVE])
self.config.save()
self.assertEqual(
len(self.config.parser.find_dir(
DIRECTIVE, None, self.vh_truth[1].path, False)), 1)
def test_remove_directives(self):
# pylint: disable=protected-access
DIRECTIVES = ["Foo", "Bar"]
for directive in DIRECTIVES:
for _ in range(10):
self.config.parser.add_dir(self.vh_truth[2].path,
directive, ["baz"])
self.config.save()
self.config._remove_directives(self.vh_truth[2].path, DIRECTIVES)
self.config.save()
for directive in DIRECTIVES:
self.assertEqual(
len(self.config.parser.find_dir(
directive, None, self.vh_truth[2].path, False)), 0)
def test_make_vhost_ssl_bad_write(self):
mock_open = mock.mock_open()
# This calls open
self.config.reverter.register_file_creation = mock.Mock()
mock_open.side_effect = IOError
with mock.patch("six.moves.builtins.open", mock_open):
self.assertRaises(
errors.PluginError,
self.config.make_vhost_ssl, self.vh_truth[0])
def test_get_ssl_vhost_path(self):
# pylint: disable=protected-access
self.assertTrue(
self.config._get_ssl_vhost_path("example_path").endswith(".conf"))
def test_add_name_vhost_if_necessary(self):
# pylint: disable=protected-access
self.config.add_name_vhost = mock.Mock()
self.config.version = (2, 2)
self.config._add_name_vhost_if_necessary(self.vh_truth[0])
self.assertTrue(self.config.add_name_vhost.called)
new_addrs = set()
for addr in self.vh_truth[0].addrs:
new_addrs.add(obj.Addr(("_default_", addr.get_port(),)))
self.vh_truth[0].addrs = new_addrs
self.config._add_name_vhost_if_necessary(self.vh_truth[0])
self.assertEqual(self.config.add_name_vhost.call_count, 2)
@mock.patch("certbot_apache.configurator.http_01.ApacheHttp01.perform")
@mock.patch("certbot_apache.configurator.ApacheConfigurator.restart")
def test_perform(self, mock_restart, mock_http_perform):
# Only tests functionality specific to configurator.perform
# Note: As more challenges are offered this will have to be expanded
account_key, achalls = self.get_key_and_achalls()
expected = [achall.response(account_key) for achall in achalls]
mock_http_perform.return_value = expected
responses = self.config.perform(achalls)
self.assertEqual(mock_http_perform.call_count, 1)
self.assertEqual(responses, expected)
self.assertEqual(mock_restart.call_count, 1)
@mock.patch("certbot_apache.configurator.ApacheConfigurator.restart")
@mock.patch("certbot_apache.parser.ApacheParser._get_runtime_cfg")
def test_cleanup(self, mock_cfg, mock_restart):
mock_cfg.return_value = ""
_, achalls = self.get_key_and_achalls()
for achall in achalls:
self.config._chall_out.add(achall) # pylint: disable=protected-access
for i, achall in enumerate(achalls):
self.config.cleanup([achall])
if i == len(achalls) - 1:
self.assertTrue(mock_restart.called)
else:
self.assertFalse(mock_restart.called)
@mock.patch("certbot_apache.configurator.ApacheConfigurator.restart")
@mock.patch("certbot_apache.parser.ApacheParser._get_runtime_cfg")
def test_cleanup_no_errors(self, mock_cfg, mock_restart):
mock_cfg.return_value = ""
_, achalls = self.get_key_and_achalls()
self.config.http_doer = mock.MagicMock()
for achall in achalls:
self.config._chall_out.add(achall) # pylint: disable=protected-access
self.config.cleanup([achalls[-1]])
self.assertFalse(mock_restart.called)
self.config.cleanup(achalls)
self.assertTrue(mock_restart.called)
@mock.patch("certbot.util.run_script")
def test_get_version(self, mock_script):
mock_script.return_value = (
"Server Version: Apache/2.4.2 (Debian)", "")
self.assertEqual(self.config.get_version(), (2, 4, 2))
mock_script.return_value = (
"Server Version: Apache/2 (Linux)", "")
self.assertEqual(self.config.get_version(), (2,))
mock_script.return_value = (
"Server Version: Apache (Debian)", "")
self.assertRaises(errors.PluginError, self.config.get_version)
mock_script.return_value = (
"Server Version: Apache/2.3{0} Apache/2.4.7".format(
os.linesep), "")
self.assertRaises(errors.PluginError, self.config.get_version)
mock_script.side_effect = errors.SubprocessError("Can't find program")
self.assertRaises(errors.PluginError, self.config.get_version)
@mock.patch("certbot_apache.configurator.util.run_script")
def test_restart(self, _):
self.config.restart()
@mock.patch("certbot_apache.configurator.util.run_script")
def test_restart_bad_process(self, mock_run_script):
mock_run_script.side_effect = [None, errors.SubprocessError]
self.assertRaises(errors.MisconfigurationError, self.config.restart)
@mock.patch("certbot.util.run_script")
def test_config_test(self, _):
self.config.config_test()
@mock.patch("certbot.util.run_script")
def test_config_test_bad_process(self, mock_run_script):
mock_run_script.side_effect = errors.SubprocessError
self.assertRaises(errors.MisconfigurationError,
self.config.config_test)
def test_more_info(self):
self.assertTrue(self.config.more_info())
def test_get_chall_pref(self):
self.assertTrue(isinstance(self.config.get_chall_pref(""), list))
def test_install_ssl_options_conf(self):
path = os.path.join(self.work_dir, "test_it")
other_path = os.path.join(self.work_dir, "other_test_it")
self.config.install_ssl_options_conf(path, other_path)
self.assertTrue(os.path.isfile(path))
self.assertTrue(os.path.isfile(other_path))
# TEST ENHANCEMENTS
def test_supported_enhancements(self):
self.assertTrue(isinstance(self.config.supported_enhancements(), list))
def test_find_http_vhost_without_ancestor(self):
# pylint: disable=protected-access
vhost = self.vh_truth[0]
vhost.ssl = True
vhost.ancestor = None
res = self.config._get_http_vhost(vhost)
self.assertEqual(self.vh_truth[0].name, res.name)
self.assertEqual(self.vh_truth[0].aliases, res.aliases)
@mock.patch("certbot_apache.configurator.ApacheConfigurator._get_http_vhost")
@mock.patch("certbot_apache.display_ops.select_vhost")
@mock.patch("certbot.util.exe_exists")
def test_enhance_unknown_vhost(self, mock_exe, mock_sel_vhost, mock_get):
self.config.parser.modules.add("rewrite_module")
mock_exe.return_value = True
ssl_vh1 = obj.VirtualHost(
"fp1", "ap1", set([obj.Addr(("*", "443"))]),
True, False)
ssl_vh1.name = "satoshi.com"
self.config.vhosts.append(ssl_vh1)
mock_sel_vhost.return_value = None
mock_get.return_value = None
self.assertRaises(
errors.PluginError,
self.config.enhance, "satoshi.com", "redirect")
def test_enhance_unknown_enhancement(self):
self.assertRaises(
errors.PluginError,
self.config.enhance, "certbot.demo", "unknown_enhancement")
def test_enhance_no_ssl_vhost(self):
with mock.patch("certbot_apache.configurator.logger.warning") as mock_log:
self.assertRaises(errors.PluginError, self.config.enhance,
"certbot.demo", "redirect")
# Check that correct logger.warning was printed
self.assertTrue("not able to find" in mock_log.call_args[0][0])
self.assertTrue("\"redirect\"" in mock_log.call_args[0][0])
mock_log.reset_mock()
self.assertRaises(errors.PluginError, self.config.enhance,
"certbot.demo", "ensure-http-header", "Test")
# Check that correct logger.warning was printed
self.assertTrue("not able to find" in mock_log.call_args[0][0])
self.assertTrue("Test" in mock_log.call_args[0][0])
@mock.patch("certbot.util.exe_exists")
def test_ocsp_stapling(self, mock_exe):
self.config.parser.update_runtime_variables = mock.Mock()
self.config.parser.modules.add("mod_ssl.c")
self.config.parser.modules.add("socache_shmcb_module")
self.config.get_version = mock.Mock(return_value=(2, 4, 7))
mock_exe.return_value = True
# This will create an ssl vhost for certbot.demo
self.config.choose_vhost("certbot.demo")
self.config.enhance("certbot.demo", "staple-ocsp")
# Get the ssl vhost for certbot.demo
ssl_vhost = self.config.assoc["certbot.demo"]
ssl_use_stapling_aug_path = self.config.parser.find_dir(
"SSLUseStapling", "on", ssl_vhost.path)
self.assertEqual(len(ssl_use_stapling_aug_path), 1)
ssl_vhost_aug_path = parser.get_aug_path(ssl_vhost.filep)
stapling_cache_aug_path = self.config.parser.find_dir('SSLStaplingCache',
"shmcb:/var/run/apache2/stapling_cache(128000)",
ssl_vhost_aug_path)
self.assertEqual(len(stapling_cache_aug_path), 1)
@mock.patch("certbot.util.exe_exists")
def test_ocsp_stapling_twice(self, mock_exe):
self.config.parser.update_runtime_variables = mock.Mock()
self.config.parser.modules.add("mod_ssl.c")
self.config.parser.modules.add("socache_shmcb_module")
self.config.get_version = mock.Mock(return_value=(2, 4, 7))
mock_exe.return_value = True
# Checking the case with already enabled ocsp stapling configuration
self.config.choose_vhost("ocspvhost.com")
self.config.enhance("ocspvhost.com", "staple-ocsp")
# Get the ssl vhost for letsencrypt.demo
ssl_vhost = self.config.assoc["ocspvhost.com"]
ssl_use_stapling_aug_path = self.config.parser.find_dir(
"SSLUseStapling", "on", ssl_vhost.path)
self.assertEqual(len(ssl_use_stapling_aug_path), 1)
ssl_vhost_aug_path = parser.get_aug_path(ssl_vhost.filep)
stapling_cache_aug_path = self.config.parser.find_dir('SSLStaplingCache',
"shmcb:/var/run/apache2/stapling_cache(128000)",
ssl_vhost_aug_path)
self.assertEqual(len(stapling_cache_aug_path), 1)
@mock.patch("certbot.util.exe_exists")
def test_ocsp_unsupported_apache_version(self, mock_exe):
mock_exe.return_value = True
self.config.parser.update_runtime_variables = mock.Mock()
self.config.parser.modules.add("mod_ssl.c")
self.config.parser.modules.add("socache_shmcb_module")
self.config.get_version = mock.Mock(return_value=(2, 2, 0))
self.config.choose_vhost("certbot.demo")
self.assertRaises(errors.PluginError,
self.config.enhance, "certbot.demo", "staple-ocsp")
def test_get_http_vhost_third_filter(self):
ssl_vh = obj.VirtualHost(
"fp", "ap", set([obj.Addr(("*", "443"))]),
True, False)
ssl_vh.name = "satoshi.com"
self.config.vhosts.append(ssl_vh)
# pylint: disable=protected-access
http_vh = self.config._get_http_vhost(ssl_vh)
self.assertFalse(http_vh.ssl)
@mock.patch("certbot.util.run_script")
@mock.patch("certbot.util.exe_exists")
def test_http_header_hsts(self, mock_exe, _):
self.config.parser.update_runtime_variables = mock.Mock()
self.config.parser.modules.add("mod_ssl.c")
self.config.parser.modules.add("headers_module")
mock_exe.return_value = True
# This will create an ssl vhost for certbot.demo
self.config.choose_vhost("certbot.demo")
self.config.enhance("certbot.demo", "ensure-http-header",
"Strict-Transport-Security")
# Get the ssl vhost for certbot.demo
ssl_vhost = self.config.assoc["certbot.demo"]
# These are not immediately available in find_dir even with save() and
# load(). They must be found in sites-available
hsts_header = self.config.parser.find_dir(
"Header", None, ssl_vhost.path)
# four args to HSTS header
self.assertEqual(len(hsts_header), 4)
def test_http_header_hsts_twice(self):
self.config.parser.modules.add("mod_ssl.c")
# skip the enable mod
self.config.parser.modules.add("headers_module")
# This will create an ssl vhost for encryption-example.demo
self.config.choose_vhost("encryption-example.demo")
self.config.enhance("encryption-example.demo", "ensure-http-header",
"Strict-Transport-Security")
self.assertRaises(
errors.PluginEnhancementAlreadyPresent,
self.config.enhance, "encryption-example.demo",
"ensure-http-header", "Strict-Transport-Security")
@mock.patch("certbot.util.run_script")
@mock.patch("certbot.util.exe_exists")
def test_http_header_uir(self, mock_exe, _):
self.config.parser.update_runtime_variables = mock.Mock()
self.config.parser.modules.add("mod_ssl.c")
self.config.parser.modules.add("headers_module")
mock_exe.return_value = True
# This will create an ssl vhost for certbot.demo
self.config.choose_vhost("certbot.demo")
self.config.enhance("certbot.demo", "ensure-http-header",
"Upgrade-Insecure-Requests")
self.assertTrue("headers_module" in self.config.parser.modules)
# Get the ssl vhost for certbot.demo
ssl_vhost = self.config.assoc["certbot.demo"]
# These are not immediately available in find_dir even with save() and
# load(). They must be found in sites-available
uir_header = self.config.parser.find_dir(
"Header", None, ssl_vhost.path)
# four args to HSTS header
self.assertEqual(len(uir_header), 4)
def test_http_header_uir_twice(self):
self.config.parser.modules.add("mod_ssl.c")
# skip the enable mod
self.config.parser.modules.add("headers_module")
# This will create an ssl vhost for encryption-example.demo
self.config.choose_vhost("encryption-example.demo")
self.config.enhance("encryption-example.demo", "ensure-http-header",
"Upgrade-Insecure-Requests")
self.assertRaises(
errors.PluginEnhancementAlreadyPresent,
self.config.enhance, "encryption-example.demo",
"ensure-http-header", "Upgrade-Insecure-Requests")
@mock.patch("certbot.util.run_script")
@mock.patch("certbot.util.exe_exists")
def test_redirect_well_formed_http(self, mock_exe, _):
self.config.parser.modules.add("rewrite_module")
self.config.parser.update_runtime_variables = mock.Mock()
mock_exe.return_value = True
self.config.get_version = mock.Mock(return_value=(2, 2))
# This will create an ssl vhost for certbot.demo
self.config.choose_vhost("certbot.demo")
self.config.enhance("certbot.demo", "redirect")
# These are not immediately available in find_dir even with save() and
# load(). They must be found in sites-available
rw_engine = self.config.parser.find_dir(
"RewriteEngine", "on", self.vh_truth[3].path)
rw_rule = self.config.parser.find_dir(
"RewriteRule", None, self.vh_truth[3].path)
self.assertEqual(len(rw_engine), 1)
# three args to rw_rule
self.assertEqual(len(rw_rule), 3)
# [:-3] to remove the vhost index number
self.assertTrue(rw_engine[0].startswith(self.vh_truth[3].path[:-3]))
self.assertTrue(rw_rule[0].startswith(self.vh_truth[3].path[:-3]))
def test_rewrite_rule_exists(self):
# Skip the enable mod
self.config.parser.modules.add("rewrite_module")
self.config.get_version = mock.Mock(return_value=(2, 3, 9))
self.config.parser.add_dir(
self.vh_truth[3].path, "RewriteRule", ["Unknown"])
# pylint: disable=protected-access
self.assertTrue(self.config._is_rewrite_exists(self.vh_truth[3]))
def test_rewrite_engine_exists(self):
# Skip the enable mod
self.config.parser.modules.add("rewrite_module")
self.config.get_version = mock.Mock(return_value=(2, 3, 9))
self.config.parser.add_dir(
self.vh_truth[3].path, "RewriteEngine", "on")
# pylint: disable=protected-access
self.assertTrue(self.config._is_rewrite_engine_on(self.vh_truth[3]))
@mock.patch("certbot.util.run_script")
@mock.patch("certbot.util.exe_exists")
def test_redirect_with_existing_rewrite(self, mock_exe, _):
self.config.parser.modules.add("rewrite_module")
self.config.parser.update_runtime_variables = mock.Mock()
mock_exe.return_value = True
self.config.get_version = mock.Mock(return_value=(2, 2, 0))
# Create a preexisting rewrite rule
self.config.parser.add_dir(
self.vh_truth[3].path, "RewriteRule", ["UnknownPattern",
"UnknownTarget"])
self.config.save()
# This will create an ssl vhost for certbot.demo
self.config.choose_vhost("certbot.demo")
self.config.enhance("certbot.demo", "redirect")
# These are not immediately available in find_dir even with save() and
# load(). They must be found in sites-available
rw_engine = self.config.parser.find_dir(
"RewriteEngine", "on", self.vh_truth[3].path)
rw_rule = self.config.parser.find_dir(
"RewriteRule", None, self.vh_truth[3].path)
self.assertEqual(len(rw_engine), 1)
# three args to rw_rule + 1 arg for the pre existing rewrite
self.assertEqual(len(rw_rule), 5)
# [:-3] to remove the vhost index number
self.assertTrue(rw_engine[0].startswith(self.vh_truth[3].path[:-3]))
self.assertTrue(rw_rule[0].startswith(self.vh_truth[3].path[:-3]))
self.assertTrue("rewrite_module" in self.config.parser.modules)
@mock.patch("certbot.util.run_script")
@mock.patch("certbot.util.exe_exists")
def test_redirect_with_old_https_redirection(self, mock_exe, _):
self.config.parser.modules.add("rewrite_module")
self.config.parser.update_runtime_variables = mock.Mock()
mock_exe.return_value = True
self.config.get_version = mock.Mock(return_value=(2, 2, 0))
ssl_vhost = self.config.choose_vhost("certbot.demo")
# pylint: disable=protected-access
http_vhost = self.config._get_http_vhost(ssl_vhost)
# Create an old (previously suppoorted) https redirectoin rewrite rule
self.config.parser.add_dir(
http_vhost.path, "RewriteRule",
["^",
"https://%{SERVER_NAME}%{REQUEST_URI}",
"[L,QSA,R=permanent]"])
self.config.save()
try:
self.config.enhance("certbot.demo", "redirect")
except errors.PluginEnhancementAlreadyPresent:
args_paths = self.config.parser.find_dir(
"RewriteRule", None, http_vhost.path, False)
arg_vals = [self.config.parser.aug.get(x) for x in args_paths]
self.assertEqual(arg_vals, constants.REWRITE_HTTPS_ARGS)
def test_redirect_with_conflict(self):
self.config.parser.modules.add("rewrite_module")
ssl_vh = obj.VirtualHost(
"fp", "ap", set([obj.Addr(("*", "443")),
obj.Addr(("zombo.com",))]),
True, False)
# No names ^ this guy should conflict.
# pylint: disable=protected-access
self.assertRaises(
errors.PluginError, self.config._enable_redirect, ssl_vh, "")
def test_redirect_two_domains_one_vhost(self):
# Skip the enable mod
self.config.parser.modules.add("rewrite_module")
self.config.get_version = mock.Mock(return_value=(2, 3, 9))
# Creates ssl vhost for the domain
self.config.choose_vhost("red.blue.purple.com")
self.config.enhance("red.blue.purple.com", "redirect")
verify_no_redirect = ("certbot_apache.configurator."
"ApacheConfigurator._verify_no_certbot_redirect")
with mock.patch(verify_no_redirect) as mock_verify:
self.config.enhance("green.blue.purple.com", "redirect")
self.assertFalse(mock_verify.called)
def test_redirect_from_previous_run(self):
# Skip the enable mod
self.config.parser.modules.add("rewrite_module")
self.config.get_version = mock.Mock(return_value=(2, 3, 9))
self.config.choose_vhost("red.blue.purple.com")
self.config.enhance("red.blue.purple.com", "redirect")
# Clear state about enabling redirect on this run
# pylint: disable=protected-access
self.config._enhanced_vhosts["redirect"].clear()
self.assertRaises(
errors.PluginEnhancementAlreadyPresent,
self.config.enhance, "green.blue.purple.com", "redirect")
def test_create_own_redirect(self):
self.config.parser.modules.add("rewrite_module")
self.config.get_version = mock.Mock(return_value=(2, 3, 9))
# For full testing... give names...
self.vh_truth[1].name = "default.com"
self.vh_truth[1].aliases = set(["yes.default.com"])
# pylint: disable=protected-access
self.config._enable_redirect(self.vh_truth[1], "")
self.assertEqual(len(self.config.vhosts), 13)
def test_create_own_redirect_for_old_apache_version(self):
self.config.parser.modules.add("rewrite_module")
self.config.get_version = mock.Mock(return_value=(2, 2))
# For full testing... give names...
self.vh_truth[1].name = "default.com"
self.vh_truth[1].aliases = set(["yes.default.com"])
# pylint: disable=protected-access
self.config._enable_redirect(self.vh_truth[1], "")
self.assertEqual(len(self.config.vhosts), 13)
def test_sift_rewrite_rule(self):
# pylint: disable=protected-access
small_quoted_target = "RewriteRule ^ \"http://\""
self.assertFalse(self.config._sift_rewrite_rule(small_quoted_target))
https_target = "RewriteRule ^ https://satoshi"
self.assertTrue(self.config._sift_rewrite_rule(https_target))
normal_target = "RewriteRule ^/(.*) http://www.a.com:1234/$1 [L,R]"
self.assertFalse(self.config._sift_rewrite_rule(normal_target))
not_rewriterule = "NotRewriteRule ^ ..."
self.assertFalse(self.config._sift_rewrite_rule(not_rewriterule))
def get_key_and_achalls(self):
"""Return testing achallenges."""
account_key = self.rsa512jwk
achall1 = achallenges.KeyAuthorizationAnnotatedChallenge(
challb=acme_util.chall_to_challb(
challenges.TLSSNI01(
token=b"jIq_Xy1mXGN37tb4L6Xj_es58fW571ZNyXekdZzhh7Q"),
"pending"),
domain="encryption-example.demo", account_key=account_key)
achall2 = achallenges.KeyAuthorizationAnnotatedChallenge(
challb=acme_util.chall_to_challb(
challenges.TLSSNI01(
token=b"uqnaPzxtrndteOqtrXb0Asl5gOJfWAnnx6QJyvcmlDU"),
"pending"),
domain="certbot.demo", account_key=account_key)
achall3 = achallenges.KeyAuthorizationAnnotatedChallenge(
challb=acme_util.chall_to_challb(
challenges.HTTP01(token=(b'x' * 16)), "pending"),
domain="example.org", account_key=account_key)
return account_key, (achall1, achall2, achall3)
def test_enable_site_nondebian(self):
inc_path = "/path/to/wherever"
vhost = self.vh_truth[0]
vhost.enabled = False
vhost.filep = inc_path
self.assertFalse(self.config.parser.find_dir("Include", inc_path))
self.assertFalse(
os.path.dirname(inc_path) in self.config.parser.existing_paths)
self.config.enable_site(vhost)
self.assertTrue(self.config.parser.find_dir("Include", inc_path))
self.assertTrue(
os.path.dirname(inc_path) in self.config.parser.existing_paths)
self.assertTrue(
os.path.basename(inc_path) in self.config.parser.existing_paths[
os.path.dirname(inc_path)])
def test_deploy_cert_not_parsed_path(self):
# Make sure that we add include to root config for vhosts when
# handle-sites is false
self.config.parser.modules.add("ssl_module")
self.config.parser.modules.add("mod_ssl.c")
self.config.parser.modules.add("socache_shmcb_module")
tmp_path = filesystem.realpath(tempfile.mkdtemp("vhostroot"))
filesystem.chmod(tmp_path, 0o755)
mock_p = "certbot_apache.configurator.ApacheConfigurator._get_ssl_vhost_path"
mock_a = "certbot_apache.parser.ApacheParser.add_include"
with mock.patch(mock_p) as mock_path:
mock_path.return_value = os.path.join(tmp_path, "whatever.conf")
with mock.patch(mock_a) as mock_add:
self.config.deploy_cert(
"encryption-example.demo",
"example/cert.pem", "example/key.pem",
"example/cert_chain.pem")
# Test that we actually called add_include
self.assertTrue(mock_add.called)
shutil.rmtree(tmp_path)
@mock.patch("certbot_apache.parser.ApacheParser.parsed_in_original")
def test_choose_vhost_and_servername_addition_parsed(self, mock_parsed):
ret_vh = self.vh_truth[8]
ret_vh.enabled = True
self.config.enable_site(ret_vh)
# Make sure that we return early
self.assertFalse(mock_parsed.called)
def test_enable_mod_unsupported(self):
self.assertRaises(errors.MisconfigurationError,
self.config.enable_mod,
"whatever")
def test_wildcard_domain(self):
# pylint: disable=protected-access
cases = {u"*.example.org": True, b"*.x.example.org": True,
u"a.example.org": False, b"a.x.example.org": False}
for key in cases:
self.assertEqual(self.config._wildcard_domain(key), cases[key])
def test_choose_vhosts_wildcard(self):
# pylint: disable=protected-access
mock_path = "certbot_apache.display_ops.select_vhost_multiple"
with mock.patch(mock_path) as mock_select_vhs:
mock_select_vhs.return_value = [self.vh_truth[3]]
vhs = self.config._choose_vhosts_wildcard("*.certbot.demo",
create_ssl=True)
# Check that the dialog was called with one vh: certbot.demo
self.assertEqual(mock_select_vhs.call_args[0][0][0], self.vh_truth[3])
self.assertEqual(len(mock_select_vhs.call_args_list), 1)
# And the actual returned values
self.assertEqual(len(vhs), 1)
self.assertTrue(vhs[0].name == "certbot.demo")
self.assertTrue(vhs[0].ssl)
self.assertFalse(vhs[0] == self.vh_truth[3])
@mock.patch("certbot_apache.configurator.ApacheConfigurator.make_vhost_ssl")
def test_choose_vhosts_wildcard_no_ssl(self, mock_makessl):
# pylint: disable=protected-access
mock_path = "certbot_apache.display_ops.select_vhost_multiple"
with mock.patch(mock_path) as mock_select_vhs:
mock_select_vhs.return_value = [self.vh_truth[1]]
vhs = self.config._choose_vhosts_wildcard("*.certbot.demo",
create_ssl=False)
self.assertFalse(mock_makessl.called)
self.assertEqual(vhs[0], self.vh_truth[1])
@mock.patch("certbot_apache.configurator.ApacheConfigurator._vhosts_for_wildcard")
@mock.patch("certbot_apache.configurator.ApacheConfigurator.make_vhost_ssl")
def test_choose_vhosts_wildcard_already_ssl(self, mock_makessl, mock_vh_for_w):
# pylint: disable=protected-access
# Already SSL vhost
mock_vh_for_w.return_value = [self.vh_truth[7]]
mock_path = "certbot_apache.display_ops.select_vhost_multiple"
with mock.patch(mock_path) as mock_select_vhs:
mock_select_vhs.return_value = [self.vh_truth[7]]
vhs = self.config._choose_vhosts_wildcard("whatever",
create_ssl=True)
self.assertEqual(mock_select_vhs.call_args[0][0][0], self.vh_truth[7])
self.assertEqual(len(mock_select_vhs.call_args_list), 1)
# Ensure that make_vhost_ssl was not called, vhost.ssl == true
self.assertFalse(mock_makessl.called)
# And the actual returned values
self.assertEqual(len(vhs), 1)
self.assertTrue(vhs[0].ssl)
self.assertEqual(vhs[0], self.vh_truth[7])
def test_deploy_cert_wildcard(self):
# pylint: disable=protected-access
mock_choose_vhosts = mock.MagicMock()
mock_choose_vhosts.return_value = [self.vh_truth[7]]
self.config._choose_vhosts_wildcard = mock_choose_vhosts
mock_d = "certbot_apache.configurator.ApacheConfigurator._deploy_cert"
with mock.patch(mock_d) as mock_dep:
self.config.deploy_cert("*.wildcard.example.org", "/tmp/path",
"/tmp/path", "/tmp/path", "/tmp/path")
self.assertTrue(mock_dep.called)
self.assertEqual(len(mock_dep.call_args_list), 1)
self.assertEqual(self.vh_truth[7], mock_dep.call_args_list[0][0][0])
@mock.patch("certbot_apache.display_ops.select_vhost_multiple")
def test_deploy_cert_wildcard_no_vhosts(self, mock_dialog):
# pylint: disable=protected-access
mock_dialog.return_value = []
self.assertRaises(errors.PluginError,
self.config.deploy_cert,
"*.wild.cat", "/tmp/path", "/tmp/path",
"/tmp/path", "/tmp/path")
@mock.patch("certbot_apache.configurator.ApacheConfigurator._choose_vhosts_wildcard")
def test_enhance_wildcard_after_install(self, mock_choose):
# pylint: disable=protected-access
self.config.parser.modules.add("mod_ssl.c")
self.config.parser.modules.add("headers_module")
self.vh_truth[3].ssl = True
self.config._wildcard_vhosts["*.certbot.demo"] = [self.vh_truth[3]]
self.config.enhance("*.certbot.demo", "ensure-http-header",
"Upgrade-Insecure-Requests")
self.assertFalse(mock_choose.called)
@mock.patch("certbot_apache.configurator.ApacheConfigurator._choose_vhosts_wildcard")
def test_enhance_wildcard_no_install(self, mock_choose):
self.vh_truth[3].ssl = True
mock_choose.return_value = [self.vh_truth[3]]
self.config.parser.modules.add("mod_ssl.c")
self.config.parser.modules.add("headers_module")
self.config.enhance("*.certbot.demo", "ensure-http-header",
"Upgrade-Insecure-Requests")
self.assertTrue(mock_choose.called)
def test_add_vhost_id(self):
for vh in [self.vh_truth[0], self.vh_truth[1], self.vh_truth[2]]:
vh_id = self.config.add_vhost_id(vh)
self.assertEqual(vh, self.config.find_vhost_by_id(vh_id))
def test_find_vhost_by_id_404(self):
self.assertRaises(errors.PluginError,
self.config.find_vhost_by_id,
"nonexistent")
def test_add_vhost_id_already_exists(self):
first_id = self.config.add_vhost_id(self.vh_truth[0])
second_id = self.config.add_vhost_id(self.vh_truth[0])
self.assertEqual(first_id, second_id)
def test_realpath_replaces_symlink(self):
orig_match = self.config.parser.aug.match
mock_vhost = copy.deepcopy(self.vh_truth[0])
mock_vhost.filep = mock_vhost.filep.replace('sites-enabled', u'sites-available')
mock_vhost.path = mock_vhost.path.replace('sites-enabled', 'sites-available')
mock_vhost.enabled = False
self.config.parser.parse_file(mock_vhost.filep)
def mock_match(aug_expr):
"""Return a mocked match list of VirtualHosts"""
if "/mocked/path" in aug_expr:
return [self.vh_truth[1].path, self.vh_truth[0].path, mock_vhost.path]
return orig_match(aug_expr)
self.config.parser.parser_paths = ["/mocked/path"]
self.config.parser.aug.match = mock_match
vhs = self.config.get_virtual_hosts()
self.assertEqual(len(vhs), 2)
self.assertTrue(vhs[0] == self.vh_truth[1])
# mock_vhost should have replaced the vh_truth[0], because its filepath
# isn't a symlink
self.assertTrue(vhs[1] == mock_vhost)
class AugeasVhostsTest(util.ApacheTest):
"""Test vhosts with illegal names dependent on augeas version."""
# pylint: disable=protected-access
def setUp(self): # pylint: disable=arguments-differ
td = "debian_apache_2_4/augeas_vhosts"
cr = "debian_apache_2_4/augeas_vhosts/apache2"
vr = "debian_apache_2_4/augeas_vhosts/apache2/sites-available"
super(AugeasVhostsTest, self).setUp(test_dir=td,
config_root=cr,
vhost_root=vr)
self.config = util.get_apache_configurator(
self.config_path, self.vhost_path, self.config_dir,
self.work_dir)
def test_choosevhost_with_illegal_name(self):
self.config.parser.aug = mock.MagicMock()
self.config.parser.aug.match.side_effect = RuntimeError
path = "debian_apache_2_4/augeas_vhosts/apache2/sites-available/old-and-default.conf"
chosen_vhost = self.config._create_vhost(path)
self.assertEqual(None, chosen_vhost)
def test_choosevhost_works(self):
path = "debian_apache_2_4/augeas_vhosts/apache2/sites-available/old-and-default.conf"
chosen_vhost = self.config._create_vhost(path)
self.assertTrue(chosen_vhost is None or chosen_vhost.path == path)
@mock.patch("certbot_apache.configurator.ApacheConfigurator._create_vhost")
def test_get_vhost_continue(self, mock_vhost):
mock_vhost.return_value = None
vhs = self.config.get_virtual_hosts()
self.assertEqual([], vhs)
def test_choose_vhost_with_matching_wildcard(self):
names = (
"an.example.net", "another.example.net", "an.other.example.net")
for name in names:
self.assertFalse(name in self.config.choose_vhost(name).aliases)
@mock.patch("certbot_apache.obj.VirtualHost.conflicts")
def test_choose_vhost_without_matching_wildcard(self, mock_conflicts):
mock_conflicts.return_value = False
mock_path = "certbot_apache.display_ops.select_vhost"
with mock.patch(mock_path, lambda _, vhosts: vhosts[0]):
for name in ("a.example.net", "other.example.net"):
self.assertTrue(name in self.config.choose_vhost(name).aliases)
@mock.patch("certbot_apache.obj.VirtualHost.conflicts")
def test_choose_vhost_wildcard_not_found(self, mock_conflicts):
mock_conflicts.return_value = False
mock_path = "certbot_apache.display_ops.select_vhost"
names = (
"abc.example.net", "not.there.tld", "aa.wildcard.tld"
)
with mock.patch(mock_path) as mock_select:
mock_select.return_value = self.config.vhosts[0]
for name in names:
orig_cc = mock_select.call_count
self.config.choose_vhost(name)
self.assertEqual(mock_select.call_count - orig_cc, 1)
def test_choose_vhost_wildcard_found(self):
mock_path = "certbot_apache.display_ops.select_vhost"
names = (
"ab.example.net", "a.wildcard.tld", "yetanother.example.net"
)
with mock.patch(mock_path) as mock_select:
mock_select.return_value = self.config.vhosts[0]
for name in names:
self.config.choose_vhost(name)
self.assertEqual(mock_select.call_count, 0)
def test_augeas_span_error(self):
broken_vhost = self.config.vhosts[0]
broken_vhost.path = broken_vhost.path + "/nonexistent"
self.assertRaises(errors.PluginError, self.config.make_vhost_ssl,
broken_vhost)
class MultiVhostsTest(util.ApacheTest):
"""Test configuration with multiple virtualhosts in a single file."""
# pylint: disable=protected-access
def setUp(self): # pylint: disable=arguments-differ
td = "debian_apache_2_4/multi_vhosts"
cr = "debian_apache_2_4/multi_vhosts/apache2"
vr = "debian_apache_2_4/multi_vhosts/apache2/sites-available"
super(MultiVhostsTest, self).setUp(test_dir=td,
config_root=cr,
vhost_root=vr)
self.config = util.get_apache_configurator(
self.config_path, self.vhost_path,
self.config_dir, self.work_dir, conf_vhost_path=self.vhost_path)
self.vh_truth = util.get_vh_truth(
self.temp_dir, "debian_apache_2_4/multi_vhosts")
def test_make_vhost_ssl(self):
ssl_vhost = self.config.make_vhost_ssl(self.vh_truth[1])
self.assertEqual(
ssl_vhost.filep,
os.path.join(self.config_path, "sites-available",
"default-le-ssl.conf"))
self.assertEqual(ssl_vhost.path,
"/files" + ssl_vhost.filep + "/IfModule/VirtualHost")
self.assertEqual(len(ssl_vhost.addrs), 1)
self.assertEqual(set([obj.Addr.fromstring("*:443")]), ssl_vhost.addrs)
self.assertEqual(ssl_vhost.name, "banana.vomit.com")
self.assertTrue(ssl_vhost.ssl)
self.assertFalse(ssl_vhost.enabled)
self.assertEqual(self.config.is_name_vhost(self.vh_truth[1]),
self.config.is_name_vhost(ssl_vhost))
mock_path = "certbot_apache.configurator.ApacheConfigurator._get_new_vh_path"
with mock.patch(mock_path) as mock_getpath:
mock_getpath.return_value = None
self.assertRaises(errors.PluginError, self.config.make_vhost_ssl,
self.vh_truth[1])
def test_get_new_path(self):
with_index_1 = ["/path[1]/section[1]"]
without_index = ["/path/section"]
with_index_2 = ["/path[2]/section[2]"]
self.assertEqual(self.config._get_new_vh_path(without_index,
with_index_1),
None)
self.assertEqual(self.config._get_new_vh_path(without_index,
with_index_2),
with_index_2[0])
both = with_index_1 + with_index_2
self.assertEqual(self.config._get_new_vh_path(without_index, both),
with_index_2[0])
@certbot_util.patch_get_utility()
def test_make_vhost_ssl_with_existing_rewrite_rule(self, mock_get_utility):
self.config.parser.modules.add("rewrite_module")
ssl_vhost = self.config.make_vhost_ssl(self.vh_truth[4])
self.assertTrue(self.config.parser.find_dir(
"RewriteEngine", "on", ssl_vhost.path, False))
with open(ssl_vhost.filep) as the_file:
conf_text = the_file.read()
commented_rewrite_rule = ("# RewriteRule \"^/secrets/(.+)\" "
"\"https://new.example.com/docs/$1\" [R,L]")
uncommented_rewrite_rule = ("RewriteRule \"^/docs/(.+)\" "
"\"http://new.example.com/docs/$1\" [R,L]")
self.assertTrue(commented_rewrite_rule in conf_text)
self.assertTrue(uncommented_rewrite_rule in conf_text)
mock_get_utility().add_message.assert_called_once_with(mock.ANY,
mock.ANY)
@certbot_util.patch_get_utility()
def test_make_vhost_ssl_with_existing_rewrite_conds(self, mock_get_utility):
self.config.parser.modules.add("rewrite_module")
ssl_vhost = self.config.make_vhost_ssl(self.vh_truth[3])
with open(ssl_vhost.filep) as the_file:
conf_lines = the_file.readlines()
conf_line_set = [l.strip() for l in conf_lines]
not_commented_cond1 = ("RewriteCond "
"%{DOCUMENT_ROOT}/%{REQUEST_FILENAME} !-f")
not_commented_rewrite_rule = ("RewriteRule "
"^(.*)$ b://u%{REQUEST_URI} [P,NE,L]")
commented_cond1 = "# RewriteCond %{HTTPS} !=on"
commented_cond2 = "# RewriteCond %{HTTPS} !^$"
commented_rewrite_rule = ("# RewriteRule ^ "
"https://%{SERVER_NAME}%{REQUEST_URI} "
"[L,NE,R=permanent]")
self.assertTrue(not_commented_cond1 in conf_line_set)
self.assertTrue(not_commented_rewrite_rule in conf_line_set)
self.assertTrue(commented_cond1 in conf_line_set)
self.assertTrue(commented_cond2 in conf_line_set)
self.assertTrue(commented_rewrite_rule in conf_line_set)
mock_get_utility().add_message.assert_called_once_with(mock.ANY,
mock.ANY)
class InstallSslOptionsConfTest(util.ApacheTest):
"""Test that the options-ssl-nginx.conf file is installed and updated properly."""
def setUp(self): # pylint: disable=arguments-differ
super(InstallSslOptionsConfTest, self).setUp()
self.config = util.get_apache_configurator(
self.config_path, self.vhost_path, self.config_dir, self.work_dir)
def _call(self):
self.config.install_ssl_options_conf(self.config.mod_ssl_conf,
self.config.updated_mod_ssl_conf_digest)
def _current_ssl_options_hash(self):
return crypto_util.sha256sum(self.config.option("MOD_SSL_CONF_SRC"))
def _assert_current_file(self):
self.assertTrue(os.path.isfile(self.config.mod_ssl_conf))
self.assertEqual(crypto_util.sha256sum(self.config.mod_ssl_conf),
self._current_ssl_options_hash())
def test_no_file(self):
# prepare should have placed a file there
self._assert_current_file()
os.remove(self.config.mod_ssl_conf)
self.assertFalse(os.path.isfile(self.config.mod_ssl_conf))
self._call()
self._assert_current_file()
def test_current_file(self):
self._assert_current_file()
self._call()
self._assert_current_file()
def test_prev_file_updates_to_current(self):
from certbot_apache.constants import ALL_SSL_OPTIONS_HASHES
ALL_SSL_OPTIONS_HASHES.insert(0, "test_hash_does_not_match")
with mock.patch('certbot.crypto_util.sha256sum') as mock_sha256:
mock_sha256.return_value = ALL_SSL_OPTIONS_HASHES[0]
self._call()
self._assert_current_file()
def test_manually_modified_current_file_does_not_update(self):
with open(self.config.mod_ssl_conf, "a") as mod_ssl_conf:
mod_ssl_conf.write("a new line for the wrong hash\n")
with mock.patch("certbot.plugins.common.logger") as mock_logger:
self._call()
self.assertFalse(mock_logger.warning.called)
self.assertTrue(os.path.isfile(self.config.mod_ssl_conf))
self.assertEqual(crypto_util.sha256sum(
self.config.option("MOD_SSL_CONF_SRC")),
self._current_ssl_options_hash())
self.assertNotEqual(crypto_util.sha256sum(self.config.mod_ssl_conf),
self._current_ssl_options_hash())
def test_manually_modified_past_file_warns(self):
with open(self.config.mod_ssl_conf, "a") as mod_ssl_conf:
mod_ssl_conf.write("a new line for the wrong hash\n")
with open(self.config.updated_mod_ssl_conf_digest, "w") as f:
f.write("hashofanoldversion")
with mock.patch("certbot.plugins.common.logger") as mock_logger:
self._call()
self.assertEqual(mock_logger.warning.call_args[0][0],
"%s has been manually modified; updated file "
"saved to %s. We recommend updating %s for security purposes.")
self.assertEqual(crypto_util.sha256sum(
self.config.option("MOD_SSL_CONF_SRC")),
self._current_ssl_options_hash())
# only print warning once
with mock.patch("certbot.plugins.common.logger") as mock_logger:
self._call()
self.assertFalse(mock_logger.warning.called)
def test_current_file_hash_in_all_hashes(self):
from certbot_apache.constants import ALL_SSL_OPTIONS_HASHES
self.assertTrue(self._current_ssl_options_hash() in ALL_SSL_OPTIONS_HASHES,
"Constants.ALL_SSL_OPTIONS_HASHES must be appended"
" with the sha256 hash of self.config.mod_ssl_conf when it is updated.")
if __name__ == "__main__":
unittest.main() # pragma: no cover
certbot-apache-0.39.0/certbot_apache/tests/gentoo_test.py 0000644 0001750 0001750 00000013035 13544726630 023701 0 ustar erica erica 0000000 0000000 """Test for certbot_apache.configurator for Gentoo overrides"""
import unittest
import mock
from certbot import errors
from certbot.compat import filesystem
from certbot.compat import os
from certbot_apache import obj
from certbot_apache import override_gentoo
from certbot_apache.tests import util
def get_vh_truth(temp_dir, config_name):
"""Return the ground truth for the specified directory."""
prefix = os.path.join(
temp_dir, config_name, "apache2/vhosts.d")
aug_pre = "/files" + prefix
vh_truth = [
obj.VirtualHost(
os.path.join(prefix, "gentoo.example.com.conf"),
os.path.join(aug_pre, "gentoo.example.com.conf/VirtualHost"),
set([obj.Addr.fromstring("*:80")]),
False, True, "gentoo.example.com"),
obj.VirtualHost(
os.path.join(prefix, "00_default_vhost.conf"),
os.path.join(aug_pre, "00_default_vhost.conf/IfDefine/VirtualHost"),
set([obj.Addr.fromstring("*:80")]),
False, True, "localhost"),
obj.VirtualHost(
os.path.join(prefix, "00_default_ssl_vhost.conf"),
os.path.join(aug_pre,
"00_default_ssl_vhost.conf" +
"/IfDefine/IfDefine/IfModule/VirtualHost"),
set([obj.Addr.fromstring("_default_:443")]),
True, True, "localhost")
]
return vh_truth
class MultipleVhostsTestGentoo(util.ApacheTest):
"""Multiple vhost tests for non-debian distro"""
_multiprocess_can_split_ = True
def setUp(self): # pylint: disable=arguments-differ
test_dir = "gentoo_apache/apache"
config_root = "gentoo_apache/apache/apache2"
vhost_root = "gentoo_apache/apache/apache2/vhosts.d"
super(MultipleVhostsTestGentoo, self).setUp(test_dir=test_dir,
config_root=config_root,
vhost_root=vhost_root)
with mock.patch("certbot_apache.override_gentoo.GentooParser.update_runtime_variables"):
self.config = util.get_apache_configurator(
self.config_path, self.vhost_path, self.config_dir, self.work_dir,
os_info="gentoo")
self.vh_truth = get_vh_truth(
self.temp_dir, "gentoo_apache/apache")
def test_get_parser(self):
self.assertTrue(isinstance(self.config.parser,
override_gentoo.GentooParser))
def test_get_virtual_hosts(self):
"""Make sure all vhosts are being properly found."""
vhs = self.config.get_virtual_hosts()
self.assertEqual(len(vhs), 3)
found = 0
for vhost in vhs:
for gentoo_truth in self.vh_truth:
if vhost == gentoo_truth:
found += 1
break
else:
raise Exception("Missed: %s" % vhost) # pragma: no cover
self.assertEqual(found, 3)
def test_get_sysconfig_vars(self):
"""Make sure we read the Gentoo APACHE2_OPTS variable correctly"""
defines = ['DEFAULT_VHOST', 'INFO',
'SSL', 'SSL_DEFAULT_VHOST', 'LANGUAGE']
self.config.parser.apacheconfig_filep = filesystem.realpath(
os.path.join(self.config.parser.root, "../conf.d/apache2"))
self.config.parser.variables = {}
with mock.patch("certbot_apache.override_gentoo.GentooParser.update_modules"):
self.config.parser.update_runtime_variables()
for define in defines:
self.assertTrue(define in self.config.parser.variables.keys())
@mock.patch("certbot_apache.parser.ApacheParser.parse_from_subprocess")
def test_no_binary_configdump(self, mock_subprocess):
"""Make sure we don't call binary dumps other than modules from Apache
as this is not supported in Gentoo currently"""
with mock.patch("certbot_apache.override_gentoo.GentooParser.update_modules"):
self.config.parser.update_runtime_variables()
self.config.parser.reset_modules()
self.assertFalse(mock_subprocess.called)
self.config.parser.update_runtime_variables()
self.config.parser.reset_modules()
self.assertTrue(mock_subprocess.called)
@mock.patch("certbot_apache.parser.ApacheParser._get_runtime_cfg")
def test_opportunistic_httpd_runtime_parsing(self, mock_get):
mod_val = (
'Loaded Modules:\n'
' mock_module (static)\n'
' another_module (static)\n'
)
def mock_get_cfg(command):
"""Mock httpd process stdout"""
if command == ['apache2ctl', 'modules']:
return mod_val
return None # pragma: no cover
mock_get.side_effect = mock_get_cfg
self.config.parser.modules = set()
with mock.patch("certbot.util.get_os_info") as mock_osi:
# Make sure we have the have the Gentoo httpd constants
mock_osi.return_value = ("gentoo", "123")
self.config.parser.update_runtime_variables()
self.assertEqual(mock_get.call_count, 1)
self.assertEqual(len(self.config.parser.modules), 4)
self.assertTrue("mod_another.c" in self.config.parser.modules)
@mock.patch("certbot_apache.configurator.util.run_script")
def test_alt_restart_works(self, mock_run_script):
mock_run_script.side_effect = [None, errors.SubprocessError, None]
self.config.restart()
self.assertEqual(mock_run_script.call_count, 3)
if __name__ == "__main__":
unittest.main() # pragma: no cover
certbot-apache-0.39.0/certbot_apache/tests/__init__.py 0000644 0001750 0001750 00000000033 13544726630 023100 0 ustar erica erica 0000000 0000000 """Certbot Apache Tests"""
certbot-apache-0.39.0/certbot_apache/tests/centos6_test.py 0000644 0001750 0001750 00000023000 13544726630 023760 0 ustar erica erica 0000000 0000000 """Test for certbot_apache.configurator for CentOS 6 overrides"""
import unittest
from certbot.compat import os
from certbot.errors import MisconfigurationError
from certbot_apache import obj
from certbot_apache import override_centos
from certbot_apache import parser
from certbot_apache.tests import util
def get_vh_truth(temp_dir, config_name):
"""Return the ground truth for the specified directory."""
prefix = os.path.join(
temp_dir, config_name, "httpd/conf.d")
aug_pre = "/files" + prefix
vh_truth = [
obj.VirtualHost(
os.path.join(prefix, "test.example.com.conf"),
os.path.join(aug_pre, "test.example.com.conf/VirtualHost"),
set([obj.Addr.fromstring("*:80")]),
False, True, "test.example.com"),
obj.VirtualHost(
os.path.join(prefix, "ssl.conf"),
os.path.join(aug_pre, "ssl.conf/VirtualHost"),
set([obj.Addr.fromstring("_default_:443")]),
True, True, None)
]
return vh_truth
class CentOS6Tests(util.ApacheTest):
"""Tests for CentOS 6"""
def setUp(self): # pylint: disable=arguments-differ
test_dir = "centos6_apache/apache"
config_root = "centos6_apache/apache/httpd"
vhost_root = "centos6_apache/apache/httpd/conf.d"
super(CentOS6Tests, self).setUp(test_dir=test_dir,
config_root=config_root,
vhost_root=vhost_root)
self.config = util.get_apache_configurator(
self.config_path, self.vhost_path, self.config_dir, self.work_dir,
version=(2, 2, 15), os_info="centos")
self.vh_truth = get_vh_truth(
self.temp_dir, "centos6_apache/apache")
def test_get_parser(self):
self.assertTrue(isinstance(self.config.parser,
override_centos.CentOSParser))
def test_get_virtual_hosts(self):
"""Make sure all vhosts are being properly found."""
vhs = self.config.get_virtual_hosts()
self.assertEqual(len(vhs), 2)
found = 0
for vhost in vhs:
for centos_truth in self.vh_truth:
if vhost == centos_truth:
found += 1
break
else:
raise Exception("Missed: %s" % vhost) # pragma: no cover
self.assertEqual(found, 2)
def test_loadmod_default(self):
ssl_loadmods = self.config.parser.find_dir(
"LoadModule", "ssl_module", exclude=False)
self.assertEqual(len(ssl_loadmods), 1)
# Make sure the LoadModule ssl_module is in ssl.conf (default)
self.assertTrue("ssl.conf" in ssl_loadmods[0])
# ...and that it's not inside of
self.assertFalse("IfModule" in ssl_loadmods[0])
# Get the example vhost
self.config.assoc["test.example.com"] = self.vh_truth[0]
self.config.deploy_cert(
"random.demo", "example/cert.pem", "example/key.pem",
"example/cert_chain.pem", "example/fullchain.pem")
self.config.save()
post_loadmods = self.config.parser.find_dir(
"LoadModule", "ssl_module", exclude=False)
# We should now have LoadModule ssl_module in root conf and ssl.conf
self.assertEqual(len(post_loadmods), 2)
for lm in post_loadmods:
# lm[:-7] removes "/arg[#]" from the path
arguments = self.config.parser.get_all_args(lm[:-7])
self.assertEqual(arguments, ["ssl_module", "modules/mod_ssl.so"])
# ...and both of them should be wrapped in
# lm[:-17] strips off /directive/arg[1] from the path.
ifmod_args = self.config.parser.get_all_args(lm[:-17])
self.assertTrue("!mod_ssl.c" in ifmod_args)
def test_loadmod_multiple(self):
sslmod_args = ["ssl_module", "modules/mod_ssl.so"]
# Adds another LoadModule to main httpd.conf in addtition to ssl.conf
self.config.parser.add_dir(self.config.parser.loc["default"], "LoadModule",
sslmod_args)
self.config.save()
pre_loadmods = self.config.parser.find_dir(
"LoadModule", "ssl_module", exclude=False)
# LoadModules are not within IfModule blocks
self.assertFalse(any(["ifmodule" in m.lower() for m in pre_loadmods]))
self.config.assoc["test.example.com"] = self.vh_truth[0]
self.config.deploy_cert(
"random.demo", "example/cert.pem", "example/key.pem",
"example/cert_chain.pem", "example/fullchain.pem")
post_loadmods = self.config.parser.find_dir(
"LoadModule", "ssl_module", exclude=False)
for mod in post_loadmods:
self.assertTrue(self.config.parser.not_modssl_ifmodule(mod)) #pylint: disable=no-member
def test_loadmod_rootconf_exists(self):
sslmod_args = ["ssl_module", "modules/mod_ssl.so"]
rootconf_ifmod = self.config.parser.get_ifmod(
parser.get_aug_path(self.config.parser.loc["default"]),
"!mod_ssl.c", beginning=True)
self.config.parser.add_dir(rootconf_ifmod[:-1], "LoadModule", sslmod_args)
self.config.save()
# Get the example vhost
self.config.assoc["test.example.com"] = self.vh_truth[0]
self.config.deploy_cert(
"random.demo", "example/cert.pem", "example/key.pem",
"example/cert_chain.pem", "example/fullchain.pem")
self.config.save()
root_loadmods = self.config.parser.find_dir(
"LoadModule", "ssl_module",
start=parser.get_aug_path(self.config.parser.loc["default"]),
exclude=False)
mods = [lm for lm in root_loadmods if self.config.parser.loc["default"] in lm]
self.assertEqual(len(mods), 1)
# [:-7] removes "/arg[#]" from the path
self.assertEqual(
self.config.parser.get_all_args(mods[0][:-7]),
sslmod_args)
def test_neg_loadmod_already_on_path(self):
loadmod_args = ["ssl_module", "modules/mod_ssl.so"]
ifmod = self.config.parser.get_ifmod(
self.vh_truth[1].path, "!mod_ssl.c", beginning=True)
self.config.parser.add_dir(ifmod[:-1], "LoadModule", loadmod_args)
self.config.parser.add_dir(self.vh_truth[1].path, "LoadModule", loadmod_args)
self.config.save()
pre_loadmods = self.config.parser.find_dir(
"LoadModule", "ssl_module", start=self.vh_truth[1].path, exclude=False)
self.assertEqual(len(pre_loadmods), 2)
# The ssl.conf now has two LoadModule directives, one inside of
# !mod_ssl.c IfModule
self.config.assoc["test.example.com"] = self.vh_truth[0]
self.config.deploy_cert(
"random.demo", "example/cert.pem", "example/key.pem",
"example/cert_chain.pem", "example/fullchain.pem")
self.config.save()
# Ensure that the additional LoadModule wasn't written into the IfModule
post_loadmods = self.config.parser.find_dir(
"LoadModule", "ssl_module", start=self.vh_truth[1].path, exclude=False)
self.assertEqual(len(post_loadmods), 1)
def test_loadmod_non_duplicate(self):
# the modules/mod_ssl.so exists in ssl.conf
sslmod_args = ["ssl_module", "modules/mod_somethingelse.so"]
rootconf_ifmod = self.config.parser.get_ifmod(
parser.get_aug_path(self.config.parser.loc["default"]),
"!mod_ssl.c", beginning=True)
self.config.parser.add_dir(rootconf_ifmod[:-1], "LoadModule", sslmod_args)
self.config.save()
self.config.assoc["test.example.com"] = self.vh_truth[0]
pre_matches = self.config.parser.find_dir("LoadModule",
"ssl_module", exclude=False)
self.assertRaises(MisconfigurationError, self.config.deploy_cert,
"random.demo", "example/cert.pem", "example/key.pem",
"example/cert_chain.pem", "example/fullchain.pem")
post_matches = self.config.parser.find_dir("LoadModule",
"ssl_module", exclude=False)
# Make sure that none was changed
self.assertEqual(pre_matches, post_matches)
def test_loadmod_not_found(self):
# Remove all existing LoadModule ssl_module... directives
orig_loadmods = self.config.parser.find_dir("LoadModule",
"ssl_module",
exclude=False)
for mod in orig_loadmods:
noarg_path = mod.rpartition("/")[0]
self.config.parser.aug.remove(noarg_path)
self.config.save()
self.config.deploy_cert(
"random.demo", "example/cert.pem", "example/key.pem",
"example/cert_chain.pem", "example/fullchain.pem")
post_loadmods = self.config.parser.find_dir("LoadModule",
"ssl_module",
exclude=False)
self.assertFalse(post_loadmods)
def test_no_ifmod_search_false(self):
#pylint: disable=no-member
self.assertFalse(self.config.parser.not_modssl_ifmodule(
"/path/does/not/include/ifmod"
))
self.assertFalse(self.config.parser.not_modssl_ifmodule(
""
))
self.assertFalse(self.config.parser.not_modssl_ifmodule(
"/path/includes/IfModule/but/no/arguments"
))
if __name__ == "__main__":
unittest.main() # pragma: no cover
certbot-apache-0.39.0/certbot_apache/tests/obj_test.py 0000644 0001750 0001750 00000012336 13544726630 023163 0 ustar erica erica 0000000 0000000 """Tests for certbot_apache.obj."""
import unittest
class VirtualHostTest(unittest.TestCase):
"""Test the VirtualHost class."""
def setUp(self):
from certbot_apache.obj import Addr
from certbot_apache.obj import VirtualHost
self.addr1 = Addr.fromstring("127.0.0.1")
self.addr2 = Addr.fromstring("127.0.0.1:443")
self.addr_default = Addr.fromstring("_default_:443")
self.vhost1 = VirtualHost(
"filep", "vh_path", set([self.addr1]), False, False, "localhost")
self.vhost1b = VirtualHost(
"filep", "vh_path", set([self.addr1]), False, False, "localhost")
self.vhost2 = VirtualHost(
"fp", "vhp", set([self.addr2]), False, False, "localhost")
def test_repr(self):
self.assertEqual(repr(self.addr2), "certbot_apache.obj.Addr(('127.0.0.1', '443'))")
def test_eq(self):
self.assertTrue(self.vhost1b == self.vhost1)
self.assertFalse(self.vhost1 == self.vhost2)
self.assertEqual(str(self.vhost1b), str(self.vhost1))
self.assertFalse(self.vhost1b == 1234)
def test_ne(self):
self.assertTrue(self.vhost1 != self.vhost2)
self.assertFalse(self.vhost1 != self.vhost1b)
def test_conflicts(self):
from certbot_apache.obj import Addr
from certbot_apache.obj import VirtualHost
complex_vh = VirtualHost(
"fp", "vhp",
set([Addr.fromstring("*:443"), Addr.fromstring("1.2.3.4:443")]),
False, False)
self.assertTrue(complex_vh.conflicts([self.addr1]))
self.assertTrue(complex_vh.conflicts([self.addr2]))
self.assertFalse(complex_vh.conflicts([self.addr_default]))
self.assertTrue(self.vhost1.conflicts([self.addr2]))
self.assertFalse(self.vhost1.conflicts([self.addr_default]))
self.assertFalse(self.vhost2.conflicts([self.addr1,
self.addr_default]))
def test_same_server(self):
from certbot_apache.obj import VirtualHost
no_name1 = VirtualHost(
"fp", "vhp", set([self.addr1]), False, False, None)
no_name2 = VirtualHost(
"fp", "vhp", set([self.addr2]), False, False, None)
no_name3 = VirtualHost(
"fp", "vhp", set([self.addr_default]),
False, False, None)
no_name4 = VirtualHost(
"fp", "vhp", set([self.addr2, self.addr_default]),
False, False, None)
self.assertTrue(self.vhost1.same_server(self.vhost2))
self.assertTrue(no_name1.same_server(no_name2))
self.assertFalse(self.vhost1.same_server(no_name1))
self.assertFalse(no_name1.same_server(no_name3))
self.assertFalse(no_name1.same_server(no_name4))
class AddrTest(unittest.TestCase):
"""Test obj.Addr."""
def setUp(self):
from certbot_apache.obj import Addr
self.addr = Addr.fromstring("*:443")
self.addr1 = Addr.fromstring("127.0.0.1")
self.addr2 = Addr.fromstring("127.0.0.1:*")
self.addr_defined = Addr.fromstring("127.0.0.1:443")
self.addr_default = Addr.fromstring("_default_:443")
def test_wildcard(self):
self.assertFalse(self.addr.is_wildcard())
self.assertTrue(self.addr1.is_wildcard())
self.assertTrue(self.addr2.is_wildcard())
def test_get_sni_addr(self):
from certbot_apache.obj import Addr
self.assertEqual(
self.addr.get_sni_addr("443"), Addr.fromstring("*:443"))
self.assertEqual(
self.addr.get_sni_addr("225"), Addr.fromstring("*:225"))
self.assertEqual(
self.addr1.get_sni_addr("443"), Addr.fromstring("127.0.0.1"))
def test_conflicts(self):
# Note: Defined IP is more important than defined port in match
self.assertTrue(self.addr.conflicts(self.addr1))
self.assertTrue(self.addr.conflicts(self.addr2))
self.assertTrue(self.addr.conflicts(self.addr_defined))
self.assertFalse(self.addr.conflicts(self.addr_default))
self.assertFalse(self.addr1.conflicts(self.addr))
self.assertTrue(self.addr1.conflicts(self.addr_defined))
self.assertFalse(self.addr1.conflicts(self.addr_default))
self.assertFalse(self.addr_defined.conflicts(self.addr1))
self.assertFalse(self.addr_defined.conflicts(self.addr2))
self.assertFalse(self.addr_defined.conflicts(self.addr))
self.assertFalse(self.addr_defined.conflicts(self.addr_default))
self.assertTrue(self.addr_default.conflicts(self.addr))
self.assertTrue(self.addr_default.conflicts(self.addr1))
self.assertTrue(self.addr_default.conflicts(self.addr_defined))
# Self test
self.assertTrue(self.addr.conflicts(self.addr))
self.assertTrue(self.addr1.conflicts(self.addr1))
# This is a tricky one...
self.assertTrue(self.addr1.conflicts(self.addr2))
def test_equal(self):
self.assertTrue(self.addr1 == self.addr2)
self.assertFalse(self.addr == self.addr1)
self.assertFalse(self.addr == 123)
def test_not_equal(self):
self.assertFalse(self.addr1 != self.addr2)
self.assertTrue(self.addr != self.addr1)
if __name__ == "__main__":
unittest.main() # pragma: no cover
certbot-apache-0.39.0/certbot_apache/tests/fedora_test.py 0000644 0001750 0001750 00000020270 13544726630 023645 0 ustar erica erica 0000000 0000000 """Test for certbot_apache.configurator for Fedora 29+ overrides"""
import unittest
import mock
from certbot import errors
from certbot.compat import filesystem
from certbot.compat import os
from certbot_apache import obj
from certbot_apache import override_fedora
from certbot_apache.tests import util
def get_vh_truth(temp_dir, config_name):
"""Return the ground truth for the specified directory."""
prefix = os.path.join(
temp_dir, config_name, "httpd/conf.d")
aug_pre = "/files" + prefix
# TODO: eventually, these tests should have a dedicated configuration instead
# of reusing the ones from centos_test
vh_truth = [
obj.VirtualHost(
os.path.join(prefix, "centos.example.com.conf"),
os.path.join(aug_pre, "centos.example.com.conf/VirtualHost"),
{obj.Addr.fromstring("*:80")},
False, True, "centos.example.com"),
obj.VirtualHost(
os.path.join(prefix, "ssl.conf"),
os.path.join(aug_pre, "ssl.conf/VirtualHost"),
{obj.Addr.fromstring("_default_:443")},
True, True, None)
]
return vh_truth
class FedoraRestartTest(util.ApacheTest):
"""Tests for Fedora specific self-signed certificate override"""
# TODO: eventually, these tests should have a dedicated configuration instead
# of reusing the ones from centos_test
def setUp(self): # pylint: disable=arguments-differ
test_dir = "centos7_apache/apache"
config_root = "centos7_apache/apache/httpd"
vhost_root = "centos7_apache/apache/httpd/conf.d"
super(FedoraRestartTest, self).setUp(test_dir=test_dir,
config_root=config_root,
vhost_root=vhost_root)
self.config = util.get_apache_configurator(
self.config_path, self.vhost_path, self.config_dir, self.work_dir,
os_info="fedora")
self.vh_truth = get_vh_truth(
self.temp_dir, "centos7_apache/apache")
def _run_fedora_test(self):
self.assertIsInstance(self.config, override_fedora.FedoraConfigurator)
self.config.config_test()
def test_fedora_restart_error(self):
c_test = "certbot_apache.configurator.ApacheConfigurator.config_test"
with mock.patch(c_test) as mock_test:
# First call raises error, second doesn't
mock_test.side_effect = [errors.MisconfigurationError, '']
with mock.patch("certbot.util.run_script") as mock_run:
mock_run.side_effect = errors.SubprocessError
self.assertRaises(errors.MisconfigurationError,
self._run_fedora_test)
def test_fedora_restart(self):
c_test = "certbot_apache.configurator.ApacheConfigurator.config_test"
with mock.patch(c_test) as mock_test:
with mock.patch("certbot.util.run_script") as mock_run:
# First call raises error, second doesn't
mock_test.side_effect = [errors.MisconfigurationError, '']
self._run_fedora_test()
self.assertEqual(mock_test.call_count, 2)
self.assertEqual(mock_run.call_args[0][0],
['systemctl', 'restart', 'httpd'])
class MultipleVhostsTestFedora(util.ApacheTest):
"""Multiple vhost tests for CentOS / RHEL family of distros"""
_multiprocess_can_split_ = True
def setUp(self): # pylint: disable=arguments-differ
test_dir = "centos7_apache/apache"
config_root = "centos7_apache/apache/httpd"
vhost_root = "centos7_apache/apache/httpd/conf.d"
super(MultipleVhostsTestFedora, self).setUp(test_dir=test_dir,
config_root=config_root,
vhost_root=vhost_root)
self.config = util.get_apache_configurator(
self.config_path, self.vhost_path, self.config_dir, self.work_dir,
os_info="fedora")
self.vh_truth = get_vh_truth(
self.temp_dir, "centos7_apache/apache")
def test_get_parser(self):
self.assertIsInstance(self.config.parser, override_fedora.FedoraParser)
@mock.patch("certbot_apache.parser.ApacheParser._get_runtime_cfg")
def test_opportunistic_httpd_runtime_parsing(self, mock_get):
define_val = (
'Define: TEST1\n'
'Define: TEST2\n'
'Define: DUMP_RUN_CFG\n'
)
mod_val = (
'Loaded Modules:\n'
' mock_module (static)\n'
' another_module (static)\n'
)
def mock_get_cfg(command):
"""Mock httpd process stdout"""
if command == ['httpd', '-t', '-D', 'DUMP_RUN_CFG']:
return define_val
elif command == ['httpd', '-t', '-D', 'DUMP_MODULES']:
return mod_val
return ""
mock_get.side_effect = mock_get_cfg
self.config.parser.modules = set()
self.config.parser.variables = {}
with mock.patch("certbot.util.get_os_info") as mock_osi:
# Make sure we have the have the CentOS httpd constants
mock_osi.return_value = ("fedora", "29")
self.config.parser.update_runtime_variables()
self.assertEqual(mock_get.call_count, 3)
self.assertEqual(len(self.config.parser.modules), 4)
self.assertEqual(len(self.config.parser.variables), 2)
self.assertTrue("TEST2" in self.config.parser.variables.keys())
self.assertTrue("mod_another.c" in self.config.parser.modules)
@mock.patch("certbot_apache.configurator.util.run_script")
def test_get_version(self, mock_run_script):
mock_run_script.return_value = ('', None)
self.assertRaises(errors.PluginError, self.config.get_version)
self.assertEqual(mock_run_script.call_args[0][0][0], 'httpd')
def test_get_virtual_hosts(self):
"""Make sure all vhosts are being properly found."""
vhs = self.config.get_virtual_hosts()
self.assertEqual(len(vhs), 2)
found = 0
for vhost in vhs:
for centos_truth in self.vh_truth:
if vhost == centos_truth:
found += 1
break
else:
raise Exception("Missed: %s" % vhost) # pragma: no cover
self.assertEqual(found, 2)
@mock.patch("certbot_apache.parser.ApacheParser._get_runtime_cfg")
def test_get_sysconfig_vars(self, mock_cfg):
"""Make sure we read the sysconfig OPTIONS variable correctly"""
# Return nothing for the process calls
mock_cfg.return_value = ""
self.config.parser.sysconfig_filep = filesystem.realpath(
os.path.join(self.config.parser.root, "../sysconfig/httpd"))
self.config.parser.variables = {}
with mock.patch("certbot.util.get_os_info") as mock_osi:
# Make sure we have the have the CentOS httpd constants
mock_osi.return_value = ("fedora", "29")
self.config.parser.update_runtime_variables()
self.assertTrue("mock_define" in self.config.parser.variables.keys())
self.assertTrue("mock_define_too" in self.config.parser.variables.keys())
self.assertTrue("mock_value" in self.config.parser.variables.keys())
self.assertEqual("TRUE", self.config.parser.variables["mock_value"])
self.assertTrue("MOCK_NOSEP" in self.config.parser.variables.keys())
self.assertEqual("NOSEP_VAL", self.config.parser.variables["NOSEP_TWO"])
@mock.patch("certbot_apache.configurator.util.run_script")
def test_alt_restart_works(self, mock_run_script):
mock_run_script.side_effect = [None, errors.SubprocessError, None]
self.config.restart()
self.assertEqual(mock_run_script.call_count, 3)
@mock.patch("certbot_apache.configurator.util.run_script")
def test_alt_restart_errors(self, mock_run_script):
mock_run_script.side_effect = [None,
errors.SubprocessError,
errors.SubprocessError]
self.assertRaises(errors.MisconfigurationError, self.config.restart)
if __name__ == "__main__":
unittest.main() # pragma: no cover
certbot-apache-0.39.0/certbot_apache/tests/testdata/ 0002755 0001750 0001750 00000000000 13544726642 022611 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/ 0002755 0001750 0001750 00000000000 13544726642 026000 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/ 0002755 0001750 0001750 00000000000 13544726642 031241 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/ 0002755 0001750 0001750 00000000000 13544726642 032544 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000151 00000000000 011212 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/ports.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/ports.0000644 0001750 0001750 00000000500 13544726630 033702 0 ustar erica erica 0000000 0000000 # If you just change the port or add more ports here, you will likely also
# have to change the VirtualHost statement in
# /etc/apache2/sites-enabled/000-default.conf
Listen 80
Listen 443
Listen 443
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000153 00000000000 011214 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/apache2.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/apache0000644 0001750 0001750 00000015135 13544726630 033710 0 ustar erica erica 0000000 0000000 # This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.4/ for detailed information about
# the directives and /usr/share/doc/apache2/README.Debian about Debian specific
# hints.
#
#
# Summary of how the Apache 2 configuration works in Debian:
# The Apache 2 web server configuration in Debian is quite different to
# upstream's suggested way to configure the web server. This is because Debian's
# default Apache2 installation attempts to make adding and removing modules,
# virtual hosts, and extra configuration directives as flexible as possible, in
# order to make automating the changes and administering the server as easy as
# possible.
# It is split into several files forming the configuration hierarchy outlined
# below, all located in the /etc/apache2/ directory:
#
# /etc/apache2/
# |-- apache2.conf
# | `-- ports.conf
# |-- mods-enabled
# | |-- *.load
# | `-- *.conf
# |-- conf-enabled
# | `-- *.conf
# `-- sites-enabled
# `-- *.conf
#
#
# * apache2.conf is the main configuration file (this file). It puts the pieces
# together by including all remaining configuration files when starting up the
# web server.
#
# * ports.conf is always included from the main configuration file. It is
# supposed to determine listening ports for incoming connections which can be
# customized anytime.
#
# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
# directories contain particular configuration snippets which manage modules,
# global configuration fragments, or virtual host configurations,
# respectively.
#
# They are activated by symlinking available configuration files from their
# respective *-available/ counterparts. These should be managed by using our
# helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
# their respective man pages for detailed information.
#
# * The binary is called apache2. Due to the use of environment variables, in
# the default configuration, apache2 needs to be started/stopped with
# /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
# work with the default configuration.
# Global configuration
#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
Mutex file:${APACHE_LOCK_DIR} default
#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 5
# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}
#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a
# container, that host's errors will be logged there and not here.
#
ErrorLog ${APACHE_LOG_DIR}/error.log
#
# LogLevel: Control the severity of messages logged to the error_log.
# Available values: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the log level for particular modules, e.g.
# "LogLevel info ssl:warn"
#
LogLevel warn
# Include module configuration:
IncludeOptional mods-enabled/*.load
IncludeOptional mods-enabled/*.conf
# Include list of ports to listen on
Include ports.conf
# Sets the default security model of the Apache2 HTTPD server. It does
# not allow access to the root filesystem outside of /usr/share and /var/www.
# The former is used by web applications packaged in Debian,
# the latter may be used for local directories served by the web server. If
# your system is serving content from a sub-directory in /srv you must allow
# access here, or in any related virtual host.
Options FollowSymLinks
AllowOverride None
Require all denied
AllowOverride None
Require all granted
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
#
AccessFileName .htaccess
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
Require all denied
# The following directives define some format nicknames for use with
# a CustomLog directive.
#
# These deviate from the Common Log Format definitions in that they use %O
# (the actual bytes sent including headers) instead of %b (the size of the
# requested file), because the latter makes it impossible to detect partial
# requests.
#
# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
# Use mod_remoteip instead.
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.
# Include generic snippets of statements
IncludeOptional conf-enabled/*.conf
# Include the virtual host configurations:
IncludeOptional sites-enabled/*.conf
ServerName vhost.in.rootconf
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000154 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-enabled/ certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-e0002755 0001750 0001750 00000000000 13544726642 033651 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000170 00000000000 011213 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-enabled/dav_svn.load certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-e0000644 0001750 0001750 00000000313 13544726630 033643 0 ustar erica erica 0000000 0000000 # Depends: dav
Include mods-enabled/dav.load
LoadModule dav_svn_module /usr/lib/apache2/modules/mod_dav_svn.so
././@LongLink 0000000 0000000 0000000 00000000172 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-enabled/authz_svn.load certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-e0000644 0001750 0001750 00000000245 13544726630 033647 0 ustar erica erica 0000000 0000000 # Depends: dav_svn
Include mods-enabled/dav_svn.load
LoadModule authz_svn_module /usr/lib/apache2/modules/mod_authz_svn.so
././@LongLink 0000000 0000000 0000000 00000000164 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-enabled/dav.load certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-e0000644 0001750 0001750 00000000135 13544726630 033645 0 ustar erica erica 0000000 0000000
LoadModule dav_module /usr/lib/apache2/modules/mod_dav.so
././@LongLink 0000000 0000000 0000000 00000000170 00000000000 011213 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-enabled/dav_svn.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-e0000644 0001750 0001750 00000004504 13544726630 033651 0 ustar erica erica 0000000 0000000 # dav_svn.conf - Example Subversion/Apache configuration
#
# For details and further options see the Apache user manual and
# the Subversion book.
#
# NOTE: for a setup with multiple vhosts, you will want to do this
# configuration in /etc/apache2/sites-available/*, not here.
# ...
# URL controls how the repository appears to the outside world.
# In this example clients access the repository as http://hostname/svn/
# Note, a literal /svn should NOT exist in your document root.
#
# Uncomment this to enable the repository
#DAV svn
# Set this to the path to your repository
#SVNPath /var/lib/svn
# Alternatively, use SVNParentPath if you have multiple repositories under
# under a single directory (/var/lib/svn/repo1, /var/lib/svn/repo2, ...).
# You need either SVNPath and SVNParentPath, but not both.
#SVNParentPath /var/lib/svn
# Access control is done at 3 levels: (1) Apache authentication, via
# any of several methods. A "Basic Auth" section is commented out
# below. (2) Apache and , also commented out
# below. (3) mod_authz_svn is a svn-specific authorization module
# which offers fine-grained read/write access control for paths
# within a repository. (The first two layers are coarse-grained; you
# can only enable/disable access to an entire repository.) Note that
# mod_authz_svn is noticeably slower than the other two layers, so if
# you don't need the fine-grained control, don't configure it.
# Basic Authentication is repository-wide. It is not secure unless
# you are using https. See the 'htpasswd' command to create and
# manage the password file - and the documentation for the
# 'auth_basic' and 'authn_file' modules, which you will need for this
# (enable them with 'a2enmod').
#AuthType Basic
#AuthName "Subversion Repository"
#AuthUserFile /etc/apache2/dav_svn.passwd
# To enable authorization via mod_authz_svn (enable that module separately):
#
#AuthzSVNAccessFile /etc/apache2/dav_svn.authz
#
# The following three lines allow anonymous read, but make
# committers authenticate themselves. It requires the 'authz_user'
# module (enable it with 'a2enmod').
#
#Require valid-user
#
#
././@LongLink 0000000 0000000 0000000 00000000157 00000000000 011220 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/ certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0002755 0001750 0001750 00000000000 13544726642 033671 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000211 00000000000 011207 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/default-ssl-port-only.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000002130 13544726630 033662 0 ustar erica erica 0000000 0000000
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# A self-signed (snakeoil) certificate can be created by installing
# the ssl-cert package. See
# /usr/share/doc/apache2/README.Debian.gz for more info.
# If both key and certificate are stored in the same file, only the
# SSLCertificateFile directive is needed.
SSLCertificateFile /etc/apache2/certs/certbot-cert_5.pem
SSLCertificateKeyFile /etc/apache2/ssl/key-certbot_15.pem
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
SSLOptions +StdEnvVars
SSLOptions +StdEnvVars
BrowserMatch "MSIE [2-6]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# MSIE 7 and newer should be able to use keepalive
BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000177 00000000000 011222 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/default-ssl.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000002261 13544726630 033667 0 ustar erica erica 0000000 0000000
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# A self-signed (snakeoil) certificate can be created by installing
# the ssl-cert package. See
# /usr/share/doc/apache2/README.Debian.gz for more info.
# If both key and certificate are stored in the same file, only the
# SSLCertificateFile directive is needed.
SSLCertificateFile /etc/apache2/certs/certbot-cert_5.pem
SSLCertificateKeyFile /etc/apache2/ssl/key-certbot_15.pem
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
SSLOptions +StdEnvVars
SSLOptions +StdEnvVars
BrowserMatch "MSIE [2-6]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# MSIE 7 and newer should be able to use keepalive
BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000177 00000000000 011222 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/000-default.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000000412 13544726630 033663 0 ustar erica erica 0000000 0000000
ServerName ip-172-30-0-17
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000205 00000000000 011212 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/mod_macro-example.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000000571 13544726630 033671 0 ustar erica erica 0000000 0000000
ServerName $domain
ServerAlias www.$domain
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
Use VHost macro1 test.com
Use VHost macro2 hostname.org
Use VHost macro3 apache.org
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000174 00000000000 011217 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/ocsp-ssl.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000003040 13544726630 033663 0 ustar erica erica 0000000 0000000
SSLStaplingCache shmcb:/var/run/apache2/stapling_cache(128000)
# The ServerName directive sets the request scheme, hostname and port that
# the server uses to identify itself. This is used when creating
# redirection URLs. In the context of virtual hosts, the ServerName
# specifies what hostname must appear in the request's Host: header to
# match this virtual host. For the default virtual host (this file) this
# value is not decisive as it is used as a last resort host regardless.
# However, you must set it for any further virtual host explicitly.
ServerName ocspvhost.com
ServerAdmin webmaster@dumpbits.com
DocumentRoot /var/www/html
# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the loglevel for particular
# modules, e.g.
#LogLevel info ssl:warn
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# For most configuration files from conf-available/, which are
# enabled or disabled at a global level, it is possible to
# include a line for only one particular virtual host. For example the
# following line enables the CGI configuration for this host only
# after it has been globally disabled with "a2disconf".
#Include conf-available/serve-cgi-bin.conf
SSLCertificateFile /etc/apache2/certs/certbot-cert_5.pem
SSLCertificateKeyFile /etc/apache2/ssl/key-certbot_15.pem
SSLUseStapling on
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000174 00000000000 011217 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/wildcard.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000000441 13544726630 033665 0 ustar erica erica 0000000 0000000
ServerName ip-172-30-0-17
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ServerAlias *.blue.purple.com
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000201 00000000000 011206 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/duplicatehttp.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000000344 13544726630 033667 0 ustar erica erica 0000000 0000000
ServerName duplicate.example.com
ServerAdmin webmaster@certbot.demo
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
././@LongLink 0000000 0000000 0000000 00000000173 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/certbot.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000001655 13544726630 033675 0 ustar erica erica 0000000 0000000
ServerName certbot.demo
ServerAlias www.certbot.demo
ServerAdmin webmaster@localhost
DocumentRoot /var/www-certbot-reworld/static/
Options FollowSymLinks
AllowOverride None
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
allow from all
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Order allow,deny
Allow from all
ErrorLog ${APACHE_LOG_DIR}/error.log
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
CustomLog ${APACHE_LOG_DIR}/access.log combined
Alias /doc/ "/usr/share/doc/"
Options Indexes MultiViews FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.0/255.0.0.0 ::1/128
././@LongLink 0000000 0000000 0000000 00000000206 00000000000 011213 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/encryption-example.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000002205 13544726630 033665 0 ustar erica erica 0000000 0000000
ServerName encryption-example.demo
ServerAdmin webmaster@localhost
DocumentRoot /var/www-encryption-example/static/
Options FollowSymLinks
AllowOverride None
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
allow from all
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Order allow,deny
Allow from all
ErrorLog ${APACHE_LOG_DIR}/error.log
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
CustomLog ${APACHE_LOG_DIR}/access.log combined
Alias /doc/ "/usr/share/doc/"
Options Indexes MultiViews FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.0/255.0.0.0 ::1/128
././@LongLink 0000000 0000000 0000000 00000000202 00000000000 011207 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/duplicatehttps.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000000572 13544726630 033672 0 ustar erica erica 0000000 0000000
ServerName duplicate.example.com
ServerAdmin webmaster@certbot.demo
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
SSLCertificateFile /etc/apache2/certs/certbot-cert_5.pem
SSLCertificateKeyFile /etc/apache2/ssl/key-certbot_15.pem
././@LongLink 0000000 0000000 0000000 00000000156 00000000000 011217 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-available/ certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-a0002755 0001750 0001750 00000000000 13544726642 033630 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000200 00000000000 011205 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-available/serve-cgi-bin.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-a0000644 0001750 0001750 00000000707 13544726630 033631 0 ustar erica erica 0000000 0000000
Define ENABLE_USR_LIB_CGI_BIN
Define ENABLE_USR_LIB_CGI_BIN
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Require all granted
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000173 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-available/security.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-a0000644 0001750 0001750 00000002215 13544726630 033625 0 ustar erica erica 0000000 0000000 # Changing the following options will not really affect the security of the
# server, but might make attacks slightly more difficult in some cases.
#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minimal | Minor | Major | Prod
# where Full conveys the most information, and Prod the least.
#ServerTokens Minimal
ServerTokens OS
#ServerTokens Full
#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#ServerSignature Off
ServerSignature On
#
# Allow TRACE method
#
# Set to "extended" to also reflect the request body (only for testing and
# diagnostic purposes).
#
# Set to one of: On | Off | extended
TraceEnable Off
#TraceEnable On
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000212 00000000000 011210 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-available/other-vhosts-access-log.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-a0000644 0001750 0001750 00000000275 13544726630 033631 0 ustar erica erica 0000000 0000000 # Define an access log for VirtualHosts that don't define their own logfile
CustomLog ${APACHE_LOG_DIR}/other_vhosts_access.log vhost_combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000200 00000000000 011205 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-available/bad_conf_file.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-a0000644 0001750 0001750 00000000056 13544726630 033626 0 ustar erica erica 0000000 0000000
ServerName invalid.net
././@LongLink 0000000 0000000 0000000 00000000155 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/ certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0002755 0001750 0001750 00000000000 13544726642 033671 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000207 00000000000 011214 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/default-ssl-port-only.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000002130 13544726630 033662 0 ustar erica erica 0000000 0000000
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# A self-signed (snakeoil) certificate can be created by installing
# the ssl-cert package. See
# /usr/share/doc/apache2/README.Debian.gz for more info.
# If both key and certificate are stored in the same file, only the
# SSLCertificateFile directive is needed.
SSLCertificateFile /etc/apache2/certs/certbot-cert_5.pem
SSLCertificateKeyFile /etc/apache2/ssl/key-certbot_15.pem
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
SSLOptions +StdEnvVars
SSLOptions +StdEnvVars
BrowserMatch "MSIE [2-6]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# MSIE 7 and newer should be able to use keepalive
BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000175 00000000000 011220 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/default-ssl.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000002261 13544726630 033667 0 ustar erica erica 0000000 0000000
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# A self-signed (snakeoil) certificate can be created by installing
# the ssl-cert package. See
# /usr/share/doc/apache2/README.Debian.gz for more info.
# If both key and certificate are stored in the same file, only the
# SSLCertificateFile directive is needed.
SSLCertificateFile /etc/apache2/certs/certbot-cert_5.pem
SSLCertificateKeyFile /etc/apache2/ssl/key-certbot_15.pem
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
SSLOptions +StdEnvVars
SSLOptions +StdEnvVars
BrowserMatch "MSIE [2-6]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# MSIE 7 and newer should be able to use keepalive
BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000175 00000000000 011220 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/000-default.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000000412 13544726630 033663 0 ustar erica erica 0000000 0000000
ServerName ip-172-30-0-17
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000203 00000000000 011210 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/mod_macro-example.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000000571 13544726630 033671 0 ustar erica erica 0000000 0000000
ServerName $domain
ServerAlias www.$domain
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
Use VHost macro1 test.com
Use VHost macro2 hostname.org
Use VHost macro3 apache.org
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000172 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/ocsp-ssl.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000003040 13544726630 033663 0 ustar erica erica 0000000 0000000
SSLStaplingCache shmcb:/var/run/apache2/stapling_cache(128000)
# The ServerName directive sets the request scheme, hostname and port that
# the server uses to identify itself. This is used when creating
# redirection URLs. In the context of virtual hosts, the ServerName
# specifies what hostname must appear in the request's Host: header to
# match this virtual host. For the default virtual host (this file) this
# value is not decisive as it is used as a last resort host regardless.
# However, you must set it for any further virtual host explicitly.
ServerName ocspvhost.com
ServerAdmin webmaster@dumpbits.com
DocumentRoot /var/www/html
# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the loglevel for particular
# modules, e.g.
#LogLevel info ssl:warn
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# For most configuration files from conf-available/, which are
# enabled or disabled at a global level, it is possible to
# include a line for only one particular virtual host. For example the
# following line enables the CGI configuration for this host only
# after it has been globally disabled with "a2disconf".
#Include conf-available/serve-cgi-bin.conf
SSLCertificateFile /etc/apache2/certs/certbot-cert_5.pem
SSLCertificateKeyFile /etc/apache2/ssl/key-certbot_15.pem
SSLUseStapling on
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000172 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/wildcard.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000000441 13544726630 033665 0 ustar erica erica 0000000 0000000
ServerName ip-172-30-0-17
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ServerAlias *.blue.purple.com
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000177 00000000000 011222 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/duplicatehttp.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000000344 13544726630 033667 0 ustar erica erica 0000000 0000000
ServerName duplicate.example.com
ServerAdmin webmaster@certbot.demo
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
././@LongLink 0000000 0000000 0000000 00000000171 00000000000 011214 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/certbot.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000001655 13544726630 033675 0 ustar erica erica 0000000 0000000
ServerName certbot.demo
ServerAlias www.certbot.demo
ServerAdmin webmaster@localhost
DocumentRoot /var/www-certbot-reworld/static/
Options FollowSymLinks
AllowOverride None
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
allow from all
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Order allow,deny
Allow from all
ErrorLog ${APACHE_LOG_DIR}/error.log
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
CustomLog ${APACHE_LOG_DIR}/access.log combined
Alias /doc/ "/usr/share/doc/"
Options Indexes MultiViews FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.0/255.0.0.0 ::1/128
././@LongLink 0000000 0000000 0000000 00000000204 00000000000 011211 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/encryption-example.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000002205 13544726630 033665 0 ustar erica erica 0000000 0000000
ServerName encryption-example.demo
ServerAdmin webmaster@localhost
DocumentRoot /var/www-encryption-example/static/
Options FollowSymLinks
AllowOverride None
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
allow from all
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Order allow,deny
Allow from all
ErrorLog ${APACHE_LOG_DIR}/error.log
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
CustomLog ${APACHE_LOG_DIR}/access.log combined
Alias /doc/ "/usr/share/doc/"
Options Indexes MultiViews FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.0/255.0.0.0 ::1/128
././@LongLink 0000000 0000000 0000000 00000000200 00000000000 011205 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/duplicatehttps.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000000572 13544726630 033672 0 ustar erica erica 0000000 0000000
ServerName duplicate.example.com
ServerAdmin webmaster@certbot.demo
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
SSLCertificateFile /etc/apache2/certs/certbot-cert_5.pem
SSLCertificateKeyFile /etc/apache2/ssl/key-certbot_15.pem
././@LongLink 0000000 0000000 0000000 00000000175 00000000000 011220 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/non-symlink.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-0000644 0001750 0001750 00000000336 13544726630 033670 0 ustar erica erica 0000000 0000000
ServerName nonsym.link
ServerAdmin webmaster@localhost
DocumentRoot /var/www-certbot-reworld/static/
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
././@LongLink 0000000 0000000 0000000 00000000146 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/envvars certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/envvar0000644 0001750 0001750 00000001726 13544726630 033771 0 ustar erica erica 0000000 0000000 # envvars - default environment variables for apache2ctl
# this won't be correct after changing uid
unset HOME
# for supporting multiple apache2 instances
if [ "${APACHE_CONFDIR##/etc/apache2-}" != "${APACHE_CONFDIR}" ] ; then
SUFFIX="-${APACHE_CONFDIR##/etc/apache2-}"
else
SUFFIX=
fi
# Since there is no sane way to get the parsed apache2 config in scripts, some
# settings are defined via environment variables and then used in apache2ctl,
# /etc/init.d/apache2, /etc/logrotate.d/apache2, etc.
export APACHE_RUN_USER=www-data
export APACHE_RUN_GROUP=www-data
# temporary state file location. This might be changed to /run in Wheezy+1
export APACHE_PID_FILE=/var/run/apache2/apache2$SUFFIX.pid
export APACHE_RUN_DIR=/var/run/apache2$SUFFIX
export APACHE_LOCK_DIR=/var/lock/apache2$SUFFIX
# Only /var/log/apache2 is handled by /etc/logrotate.d/apache2.
export APACHE_LOG_DIR=/var/log/apache2$SUFFIX
## The locale used by some modules like mod_dav
export LANG=C
export LANG
././@LongLink 0000000 0000000 0000000 00000000154 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-enabled/ certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-e0002755 0001750 0001750 00000000000 13544726642 033634 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000176 00000000000 011221 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-enabled/serve-cgi-bin.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-e0000644 0001750 0001750 00000000707 13544726630 033635 0 ustar erica erica 0000000 0000000
Define ENABLE_USR_LIB_CGI_BIN
Define ENABLE_USR_LIB_CGI_BIN
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Require all granted
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000171 00000000000 011214 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-enabled/security.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-e0000644 0001750 0001750 00000002215 13544726630 033631 0 ustar erica erica 0000000 0000000 # Changing the following options will not really affect the security of the
# server, but might make attacks slightly more difficult in some cases.
#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minimal | Minor | Major | Prod
# where Full conveys the most information, and Prod the least.
#ServerTokens Minimal
ServerTokens OS
#ServerTokens Full
#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#ServerSignature Off
ServerSignature On
#
# Allow TRACE method
#
# Set to "extended" to also reflect the request body (only for testing and
# diagnostic purposes).
#
# Set to one of: On | Off | extended
TraceEnable Off
#TraceEnable On
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000210 00000000000 011206 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-enabled/other-vhosts-access-log.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-e0000644 0001750 0001750 00000000275 13544726630 033635 0 ustar erica erica 0000000 0000000 # Define an access log for VirtualHosts that don't define their own logfile
CustomLog ${APACHE_LOG_DIR}/other_vhosts_access.log vhost_combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000156 00000000000 011217 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-available/ certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-a0002755 0001750 0001750 00000000000 13544726642 033645 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000166 00000000000 011220 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-available/ssl.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-a0000644 0001750 0001750 00000006514 13544726630 033650 0 ustar erica erica 0000000 0000000
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#
SSLRandomSeed startup builtin
SSLRandomSeed startup file:/dev/urandom 512
SSLRandomSeed connect builtin
SSLRandomSeed connect file:/dev/urandom 512
##
## SSL Global Context
##
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
##
#
# Some MIME-types for downloading Certificates and CRLs
#
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog exec:/usr/share/apache2/ask-for-passphrase
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
# (The mechanism dbm has known memory leaks and should not be used).
#SSLSessionCache dbm:${APACHE_RUN_DIR}/ssl_scache
SSLSessionCache shmcb:${APACHE_RUN_DIR}/ssl_scache(512000)
SSLSessionCacheTimeout 300
# Semaphore:
# Configure the path to the mutual exclusion semaphore the
# SSL engine uses internally for inter-process synchronization.
# (Disabled by default, the global Mutex directive consolidates by default
# this)
#Mutex file:${APACHE_LOCK_DIR}/ssl_mutex ssl-cache
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate. See the
# ciphers(1) man page from the openssl package for list of all available
# options.
# Enable only secure ciphers:
SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
# Speed-optimized SSL Cipher configuration:
# If speed is your main concern (on busy HTTPS servers e.g.),
# you might want to force clients to specific, performance
# optimized ciphers. In this case, prepend those ciphers
# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
# Caveat: by giving precedence to RC4-SHA and AES128-SHA
# (as in the example below), most connections will no longer
# have perfect forward secrecy - if the server's key is
# compromised, captures of past or future traffic must be
# considered compromised, too.
#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
#SSLHonorCipherOrder on
# The protocols to enable.
# Available values: all, SSLv3, TLSv1, TLSv1.1, TLSv1.2
# SSL v2 is no longer supported
SSLProtocol all
# Allow insecure renegotiation with clients which do not yet support the
# secure renegotiation protocol. Default: Off
#SSLInsecureRenegotiation on
# Whether to forbid non-SNI clients to access name based virtual hosts.
# Default: Off
#SSLStrictSNIVHostCheck On
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000172 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-available/dav_svn.load certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-a0000644 0001750 0001750 00000000313 13544726630 033637 0 ustar erica erica 0000000 0000000 # Depends: dav
Include mods-enabled/dav.load
LoadModule dav_svn_module /usr/lib/apache2/modules/mod_dav_svn.so
././@LongLink 0000000 0000000 0000000 00000000166 00000000000 011220 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-available/ssl.load certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-a0000644 0001750 0001750 00000000141 13544726630 033636 0 ustar erica erica 0000000 0000000 # Depends: setenvif mime socache_shmcb
LoadModule ssl_module /usr/lib/apache2/modules/mod_ssl.so
././@LongLink 0000000 0000000 0000000 00000000174 00000000000 011217 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-available/authz_svn.load certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-a0000644 0001750 0001750 00000000245 13544726630 033643 0 ustar erica erica 0000000 0000000 # Depends: dav_svn
Include mods-enabled/dav_svn.load
LoadModule authz_svn_module /usr/lib/apache2/modules/mod_authz_svn.so
././@LongLink 0000000 0000000 0000000 00000000172 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-available/rewrite.load certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-a0000644 0001750 0001750 00000000102 13544726630 033633 0 ustar erica erica 0000000 0000000 LoadModule rewrite_module /usr/lib/apache2/modules/mod_rewrite.so
././@LongLink 0000000 0000000 0000000 00000000166 00000000000 011220 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-available/dav.load certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-a0000644 0001750 0001750 00000000135 13544726630 033641 0 ustar erica erica 0000000 0000000
LoadModule dav_module /usr/lib/apache2/modules/mod_dav.so
././@LongLink 0000000 0000000 0000000 00000000172 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-available/dav_svn.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-a0000644 0001750 0001750 00000004504 13544726630 033645 0 ustar erica erica 0000000 0000000 # dav_svn.conf - Example Subversion/Apache configuration
#
# For details and further options see the Apache user manual and
# the Subversion book.
#
# NOTE: for a setup with multiple vhosts, you will want to do this
# configuration in /etc/apache2/sites-available/*, not here.
# ...
# URL controls how the repository appears to the outside world.
# In this example clients access the repository as http://hostname/svn/
# Note, a literal /svn should NOT exist in your document root.
#
# Uncomment this to enable the repository
#DAV svn
# Set this to the path to your repository
#SVNPath /var/lib/svn
# Alternatively, use SVNParentPath if you have multiple repositories under
# under a single directory (/var/lib/svn/repo1, /var/lib/svn/repo2, ...).
# You need either SVNPath and SVNParentPath, but not both.
#SVNParentPath /var/lib/svn
# Access control is done at 3 levels: (1) Apache authentication, via
# any of several methods. A "Basic Auth" section is commented out
# below. (2) Apache and , also commented out
# below. (3) mod_authz_svn is a svn-specific authorization module
# which offers fine-grained read/write access control for paths
# within a repository. (The first two layers are coarse-grained; you
# can only enable/disable access to an entire repository.) Note that
# mod_authz_svn is noticeably slower than the other two layers, so if
# you don't need the fine-grained control, don't configure it.
# Basic Authentication is repository-wide. It is not secure unless
# you are using https. See the 'htpasswd' command to create and
# manage the password file - and the documentation for the
# 'auth_basic' and 'authn_file' modules, which you will need for this
# (enable them with 'a2enmod').
#AuthType Basic
#AuthName "Subversion Repository"
#AuthUserFile /etc/apache2/dav_svn.passwd
# To enable authorization via mod_authz_svn (enable that module separately):
#
#AuthzSVNAccessFile /etc/apache2/dav_svn.authz
#
# The following three lines allow anonymous read, but make
# committers authenticate themselves. It requires the 'authz_user'
# module (enable it with 'a2enmod').
#
#Require valid-user
#
#
certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/sites 0000644 0001750 0001750 00000000231 13544726630 032302 0 ustar erica erica 0000000 0000000 sites-available/certbot.conf, certbot.demo
sites-available/encryption-example.conf, encryption-example.demo
sites-available/ocsp-ssl.conf, ocspvhost.com
certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/ 0002755 0001750 0001750 00000000000 13544726642 030653 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/ 0002755 0001750 0001750 00000000000 13544726642 032156 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000147 00000000000 011217 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/ports.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/ports.co0000644 0001750 0001750 00000000500 13544726630 033636 0 ustar erica erica 0000000 0000000 # If you just change the port or add more ports here, you will likely also
# have to change the VirtualHost statement in
# /etc/apache2/sites-enabled/000-default.conf
Listen 80
Listen 443
Listen 443
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000151 00000000000 011212 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/apache2.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/apache2.0000644 0001750 0001750 00000014605 13544726630 033463 0 ustar erica erica 0000000 0000000 # This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.4/ for detailed information about
# the directives and /usr/share/doc/apache2/README.Debian about Debian specific
# hints.
#
#
# Summary of how the Apache 2 configuration works in Debian:
# The Apache 2 web server configuration in Debian is quite different to
# upstream's suggested way to configure the web server. This is because Debian's
# default Apache2 installation attempts to make adding and removing modules,
# virtual hosts, and extra configuration directives as flexible as possible, in
# order to make automating the changes and administering the server as easy as
# possible.
# It is split into several files forming the configuration hierarchy outlined
# below, all located in the /etc/apache2/ directory:
#
# /etc/apache2/
# |-- apache2.conf
# | `-- ports.conf
# |-- mods-enabled
# | |-- *.load
# | `-- *.conf
# |-- conf-enabled
# | `-- *.conf
# `-- sites-enabled
# `-- *.conf
#
#
# * apache2.conf is the main configuration file (this file). It puts the pieces
# together by including all remaining configuration files when starting up the
# web server.
#
# * ports.conf is always included from the main configuration file. It is
# supposed to determine listening ports for incoming connections which can be
# customized anytime.
#
# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
# directories contain particular configuration snippets which manage modules,
# global configuration fragments, or virtual host configurations,
# respectively.
#
# They are activated by symlinking available configuration files from their
# respective *-available/ counterparts. These should be managed by using our
# helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
# their respective man pages for detailed information.
#
# * The binary is called apache2. Due to the use of environment variables, in
# the default configuration, apache2 needs to be started/stopped with
# /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
# work with the default configuration.
# Global configuration
#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
Mutex file:${APACHE_LOCK_DIR} default
#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 5
# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}
#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a
# container, that host's errors will be logged there and not here.
#
ErrorLog ${APACHE_LOG_DIR}/error.log
#
# LogLevel: Control the severity of messages logged to the error_log.
# Available values: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the log level for particular modules, e.g.
# "LogLevel info ssl:warn"
#
LogLevel warn
# Include module configuration:
IncludeOptional mods-enabled/*.load
IncludeOptional mods-enabled/*.conf
# Include list of ports to listen on
Include ports.conf
# Sets the default security model of the Apache2 HTTPD server. It does
# not allow access to the root filesystem outside of /usr/share and /var/www.
# The former is used by web applications packaged in Debian,
# the latter may be used for local directories served by the web server. If
# your system is serving content from a sub-directory in /srv you must allow
# access here, or in any related virtual host.
Options FollowSymLinks
AllowOverride None
Require all denied
AllowOverride None
Require all granted
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
#
AccessFileName .htaccess
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
Require all denied
# The following directives define some format nicknames for use with
# a CustomLog directive.
#
# These deviate from the Common Log Format definitions in that they use %O
# (the actual bytes sent including headers) instead of %b (the size of the
# requested file), because the latter makes it impossible to detect partial
# requests.
#
# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
# Use mod_remoteip instead.
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.
# Include generic snippets of statements
IncludeOptional conf-enabled/*.conf
# Include the virtual host configurations:
IncludeOptional sites-enabled/*.conf
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000152 00000000000 011213 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-enabled/ certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-ena0002755 0001750 0001750 00000000000 13544726642 033602 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000166 00000000000 011220 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-enabled/dav_svn.load certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-ena0000644 0001750 0001750 00000000313 13544726630 033574 0 ustar erica erica 0000000 0000000 # Depends: dav
Include mods-enabled/dav.load
LoadModule dav_svn_module /usr/lib/apache2/modules/mod_dav_svn.so
././@LongLink 0000000 0000000 0000000 00000000170 00000000000 011213 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-enabled/authz_svn.load certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-ena0000644 0001750 0001750 00000000245 13544726630 033600 0 ustar erica erica 0000000 0000000 # Depends: dav_svn
Include mods-enabled/dav_svn.load
LoadModule authz_svn_module /usr/lib/apache2/modules/mod_authz_svn.so
././@LongLink 0000000 0000000 0000000 00000000162 00000000000 011214 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-enabled/dav.load certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-ena0000644 0001750 0001750 00000000135 13544726630 033576 0 ustar erica erica 0000000 0000000
LoadModule dav_module /usr/lib/apache2/modules/mod_dav.so
././@LongLink 0000000 0000000 0000000 00000000166 00000000000 011220 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-enabled/dav_svn.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-ena0000644 0001750 0001750 00000004504 13544726630 033602 0 ustar erica erica 0000000 0000000 # dav_svn.conf - Example Subversion/Apache configuration
#
# For details and further options see the Apache user manual and
# the Subversion book.
#
# NOTE: for a setup with multiple vhosts, you will want to do this
# configuration in /etc/apache2/sites-available/*, not here.
# ...
# URL controls how the repository appears to the outside world.
# In this example clients access the repository as http://hostname/svn/
# Note, a literal /svn should NOT exist in your document root.
#
# Uncomment this to enable the repository
#DAV svn
# Set this to the path to your repository
#SVNPath /var/lib/svn
# Alternatively, use SVNParentPath if you have multiple repositories under
# under a single directory (/var/lib/svn/repo1, /var/lib/svn/repo2, ...).
# You need either SVNPath and SVNParentPath, but not both.
#SVNParentPath /var/lib/svn
# Access control is done at 3 levels: (1) Apache authentication, via
# any of several methods. A "Basic Auth" section is commented out
# below. (2) Apache and , also commented out
# below. (3) mod_authz_svn is a svn-specific authorization module
# which offers fine-grained read/write access control for paths
# within a repository. (The first two layers are coarse-grained; you
# can only enable/disable access to an entire repository.) Note that
# mod_authz_svn is noticeably slower than the other two layers, so if
# you don't need the fine-grained control, don't configure it.
# Basic Authentication is repository-wide. It is not secure unless
# you are using https. See the 'htpasswd' command to create and
# manage the password file - and the documentation for the
# 'auth_basic' and 'authn_file' modules, which you will need for this
# (enable them with 'a2enmod').
#AuthType Basic
#AuthName "Subversion Repository"
#AuthUserFile /etc/apache2/dav_svn.passwd
# To enable authorization via mod_authz_svn (enable that module separately):
#
#AuthzSVNAccessFile /etc/apache2/dav_svn.authz
#
# The following three lines allow anonymous read, but make
# committers authenticate themselves. It requires the 'authz_user'
# module (enable it with 'a2enmod').
#
#Require valid-user
#
#
././@LongLink 0000000 0000000 0000000 00000000155 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-available/ certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-av0002755 0001750 0001750 00000000000 13544726642 033632 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000172 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-available/wildcard.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-av0000644 0001750 0001750 00000000502 13544726630 033624 0 ustar erica erica 0000000 0000000
ServerName example.net
ServerAlias ??.example.net *.other.example.net *another.example.net
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000202 00000000000 011207 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-available/another_wildcard.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-av0000644 0001750 0001750 00000000432 13544726630 033626 0 ustar erica erica 0000000 0000000
ServerName wildcard.tld
ServerAlias ?.wildcard.tld
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000201 00000000000 011206 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-available/old-and-default.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-av0000644 0001750 0001750 00000000412 13544726630 033624 0 ustar erica erica 0000000 0000000
ServerName ip-172-30-0-17
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000154 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-available/ certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-ava0002755 0001750 0001750 00000000000 13544726642 033571 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000176 00000000000 011221 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-available/serve-cgi-bin.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-ava0000644 0001750 0001750 00000000707 13544726630 033572 0 ustar erica erica 0000000 0000000
Define ENABLE_USR_LIB_CGI_BIN
Define ENABLE_USR_LIB_CGI_BIN
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Require all granted
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000171 00000000000 011214 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-available/security.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-ava0000644 0001750 0001750 00000002215 13544726630 033566 0 ustar erica erica 0000000 0000000 # Changing the following options will not really affect the security of the
# server, but might make attacks slightly more difficult in some cases.
#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minimal | Minor | Major | Prod
# where Full conveys the most information, and Prod the least.
#ServerTokens Minimal
ServerTokens OS
#ServerTokens Full
#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#ServerSignature Off
ServerSignature On
#
# Allow TRACE method
#
# Set to "extended" to also reflect the request body (only for testing and
# diagnostic purposes).
#
# Set to one of: On | Off | extended
TraceEnable Off
#TraceEnable On
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000210 00000000000 011206 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-available/other-vhosts-access-log.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-ava0000644 0001750 0001750 00000000275 13544726630 033572 0 ustar erica erica 0000000 0000000 # Define an access log for VirtualHosts that don't define their own logfile
CustomLog ${APACHE_LOG_DIR}/other_vhosts_access.log vhost_combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000176 00000000000 011221 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-available/bad_conf_file.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-ava0000644 0001750 0001750 00000000056 13544726630 033567 0 ustar erica erica 0000000 0000000
ServerName invalid.net
././@LongLink 0000000 0000000 0000000 00000000153 00000000000 011214 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-enabled/ certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-en0002755 0001750 0001750 00000000000 13544726642 033626 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000170 00000000000 011213 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-enabled/wildcard.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-en0000644 0001750 0001750 00000000502 13544726630 033620 0 ustar erica erica 0000000 0000000
ServerName example.net
ServerAlias ??.example.net *.other.example.net *another.example.net
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000200 00000000000 011205 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-enabled/another_wildcard.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-en0000644 0001750 0001750 00000000432 13544726630 033622 0 ustar erica erica 0000000 0000000
ServerName wildcard.tld
ServerAlias ?.wildcard.tld
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000177 00000000000 011222 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-enabled/old-and-default.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-en0000644 0001750 0001750 00000000412 13544726630 033620 0 ustar erica erica 0000000 0000000
ServerName ip-172-30-0-17
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/envvars 0000644 0001750 0001750 00000001726 13544726630 033566 0 ustar erica erica 0000000 0000000 # envvars - default environment variables for apache2ctl
# this won't be correct after changing uid
unset HOME
# for supporting multiple apache2 instances
if [ "${APACHE_CONFDIR##/etc/apache2-}" != "${APACHE_CONFDIR}" ] ; then
SUFFIX="-${APACHE_CONFDIR##/etc/apache2-}"
else
SUFFIX=
fi
# Since there is no sane way to get the parsed apache2 config in scripts, some
# settings are defined via environment variables and then used in apache2ctl,
# /etc/init.d/apache2, /etc/logrotate.d/apache2, etc.
export APACHE_RUN_USER=www-data
export APACHE_RUN_GROUP=www-data
# temporary state file location. This might be changed to /run in Wheezy+1
export APACHE_PID_FILE=/var/run/apache2/apache2$SUFFIX.pid
export APACHE_RUN_DIR=/var/run/apache2$SUFFIX
export APACHE_LOCK_DIR=/var/lock/apache2$SUFFIX
# Only /var/log/apache2 is handled by /etc/logrotate.d/apache2.
export APACHE_LOG_DIR=/var/log/apache2$SUFFIX
## The locale used by some modules like mod_dav
export LANG=C
export LANG
././@LongLink 0000000 0000000 0000000 00000000152 00000000000 011213 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-enabled/ certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-ena0002755 0001750 0001750 00000000000 13544726642 033565 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000174 00000000000 011217 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-enabled/serve-cgi-bin.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-ena0000644 0001750 0001750 00000000707 13544726630 033566 0 ustar erica erica 0000000 0000000
Define ENABLE_USR_LIB_CGI_BIN
Define ENABLE_USR_LIB_CGI_BIN
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Require all granted
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000167 00000000000 011221 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-enabled/security.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-ena0000644 0001750 0001750 00000002215 13544726630 033562 0 ustar erica erica 0000000 0000000 # Changing the following options will not really affect the security of the
# server, but might make attacks slightly more difficult in some cases.
#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minimal | Minor | Major | Prod
# where Full conveys the most information, and Prod the least.
#ServerTokens Minimal
ServerTokens OS
#ServerTokens Full
#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#ServerSignature Off
ServerSignature On
#
# Allow TRACE method
#
# Set to "extended" to also reflect the request body (only for testing and
# diagnostic purposes).
#
# Set to one of: On | Off | extended
TraceEnable Off
#TraceEnable On
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000206 00000000000 011213 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-enabled/other-vhosts-access-log.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-ena0000644 0001750 0001750 00000000275 13544726630 033566 0 ustar erica erica 0000000 0000000 # Define an access log for VirtualHosts that don't define their own logfile
CustomLog ${APACHE_LOG_DIR}/other_vhosts_access.log vhost_combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000154 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-available/ certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-ava0002755 0001750 0001750 00000000000 13544726642 033606 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000164 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-available/ssl.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-ava0000644 0001750 0001750 00000006514 13544726630 033611 0 ustar erica erica 0000000 0000000
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#
SSLRandomSeed startup builtin
SSLRandomSeed startup file:/dev/urandom 512
SSLRandomSeed connect builtin
SSLRandomSeed connect file:/dev/urandom 512
##
## SSL Global Context
##
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
##
#
# Some MIME-types for downloading Certificates and CRLs
#
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog exec:/usr/share/apache2/ask-for-passphrase
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
# (The mechanism dbm has known memory leaks and should not be used).
#SSLSessionCache dbm:${APACHE_RUN_DIR}/ssl_scache
SSLSessionCache shmcb:${APACHE_RUN_DIR}/ssl_scache(512000)
SSLSessionCacheTimeout 300
# Semaphore:
# Configure the path to the mutual exclusion semaphore the
# SSL engine uses internally for inter-process synchronization.
# (Disabled by default, the global Mutex directive consolidates by default
# this)
#Mutex file:${APACHE_LOCK_DIR}/ssl_mutex ssl-cache
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate. See the
# ciphers(1) man page from the openssl package for list of all available
# options.
# Enable only secure ciphers:
SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
# Speed-optimized SSL Cipher configuration:
# If speed is your main concern (on busy HTTPS servers e.g.),
# you might want to force clients to specific, performance
# optimized ciphers. In this case, prepend those ciphers
# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
# Caveat: by giving precedence to RC4-SHA and AES128-SHA
# (as in the example below), most connections will no longer
# have perfect forward secrecy - if the server's key is
# compromised, captures of past or future traffic must be
# considered compromised, too.
#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
#SSLHonorCipherOrder on
# The protocols to enable.
# Available values: all, SSLv3, TLSv1, TLSv1.1, TLSv1.2
# SSL v2 is no longer supported
SSLProtocol all
# Allow insecure renegotiation with clients which do not yet support the
# secure renegotiation protocol. Default: Off
#SSLInsecureRenegotiation on
# Whether to forbid non-SNI clients to access name based virtual hosts.
# Default: Off
#SSLStrictSNIVHostCheck On
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000170 00000000000 011213 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-available/dav_svn.load certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-ava0000644 0001750 0001750 00000000313 13544726630 033600 0 ustar erica erica 0000000 0000000 # Depends: dav
Include mods-enabled/dav.load
LoadModule dav_svn_module /usr/lib/apache2/modules/mod_dav_svn.so
././@LongLink 0000000 0000000 0000000 00000000164 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-available/ssl.load certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-ava0000644 0001750 0001750 00000000141 13544726630 033577 0 ustar erica erica 0000000 0000000 # Depends: setenvif mime socache_shmcb
LoadModule ssl_module /usr/lib/apache2/modules/mod_ssl.so
././@LongLink 0000000 0000000 0000000 00000000172 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-available/authz_svn.load certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-ava0000644 0001750 0001750 00000000245 13544726630 033604 0 ustar erica erica 0000000 0000000 # Depends: dav_svn
Include mods-enabled/dav_svn.load
LoadModule authz_svn_module /usr/lib/apache2/modules/mod_authz_svn.so
././@LongLink 0000000 0000000 0000000 00000000170 00000000000 011213 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-available/rewrite.load certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-ava0000644 0001750 0001750 00000000102 13544726630 033574 0 ustar erica erica 0000000 0000000 LoadModule rewrite_module /usr/lib/apache2/modules/mod_rewrite.so
././@LongLink 0000000 0000000 0000000 00000000164 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-available/dav.load certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-ava0000644 0001750 0001750 00000000135 13544726630 033602 0 ustar erica erica 0000000 0000000
LoadModule dav_module /usr/lib/apache2/modules/mod_dav.so
././@LongLink 0000000 0000000 0000000 00000000170 00000000000 011213 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-available/dav_svn.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-ava0000644 0001750 0001750 00000004504 13544726630 033606 0 ustar erica erica 0000000 0000000 # dav_svn.conf - Example Subversion/Apache configuration
#
# For details and further options see the Apache user manual and
# the Subversion book.
#
# NOTE: for a setup with multiple vhosts, you will want to do this
# configuration in /etc/apache2/sites-available/*, not here.
# ...
# URL controls how the repository appears to the outside world.
# In this example clients access the repository as http://hostname/svn/
# Note, a literal /svn should NOT exist in your document root.
#
# Uncomment this to enable the repository
#DAV svn
# Set this to the path to your repository
#SVNPath /var/lib/svn
# Alternatively, use SVNParentPath if you have multiple repositories under
# under a single directory (/var/lib/svn/repo1, /var/lib/svn/repo2, ...).
# You need either SVNPath and SVNParentPath, but not both.
#SVNParentPath /var/lib/svn
# Access control is done at 3 levels: (1) Apache authentication, via
# any of several methods. A "Basic Auth" section is commented out
# below. (2) Apache and , also commented out
# below. (3) mod_authz_svn is a svn-specific authorization module
# which offers fine-grained read/write access control for paths
# within a repository. (The first two layers are coarse-grained; you
# can only enable/disable access to an entire repository.) Note that
# mod_authz_svn is noticeably slower than the other two layers, so if
# you don't need the fine-grained control, don't configure it.
# Basic Authentication is repository-wide. It is not secure unless
# you are using https. See the 'htpasswd' command to create and
# manage the password file - and the documentation for the
# 'auth_basic' and 'authn_file' modules, which you will need for this
# (enable them with 'a2enmod').
#AuthType Basic
#AuthName "Subversion Repository"
#AuthUserFile /etc/apache2/dav_svn.passwd
# To enable authorization via mod_authz_svn (enable that module separately):
#
#AuthzSVNAccessFile /etc/apache2/dav_svn.authz
#
# The following three lines allow anonymous read, but make
# committers authenticate themselves. It requires the 'authz_user'
# module (enable it with 'a2enmod').
#
#Require valid-user
#
#
certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/sites 0000644 0001750 0001750 00000000231 13544726630 031714 0 ustar erica erica 0000000 0000000 sites-available/certbot.conf, certbot.demo
sites-available/encryption-example.conf, encryption-example.demo
sites-available/ocsp-ssl.conf, ocspvhost.com
certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/ 0002755 0001750 0001750 00000000000 13544726642 030540 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/ 0002755 0001750 0001750 00000000000 13544726642 032043 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000146 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/ports.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/ports.con0000644 0001750 0001750 00000000500 13544726630 033701 0 ustar erica erica 0000000 0000000 # If you just change the port or add more ports here, you will likely also
# have to change the VirtualHost statement in
# /etc/apache2/sites-enabled/000-default.conf
Listen 80
Listen 443
Listen 443
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000150 00000000000 011211 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/apache2.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/apache2.c0000644 0001750 0001750 00000014605 13544726630 033513 0 ustar erica erica 0000000 0000000 # This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.4/ for detailed information about
# the directives and /usr/share/doc/apache2/README.Debian about Debian specific
# hints.
#
#
# Summary of how the Apache 2 configuration works in Debian:
# The Apache 2 web server configuration in Debian is quite different to
# upstream's suggested way to configure the web server. This is because Debian's
# default Apache2 installation attempts to make adding and removing modules,
# virtual hosts, and extra configuration directives as flexible as possible, in
# order to make automating the changes and administering the server as easy as
# possible.
# It is split into several files forming the configuration hierarchy outlined
# below, all located in the /etc/apache2/ directory:
#
# /etc/apache2/
# |-- apache2.conf
# | `-- ports.conf
# |-- mods-enabled
# | |-- *.load
# | `-- *.conf
# |-- conf-enabled
# | `-- *.conf
# `-- sites-enabled
# `-- *.conf
#
#
# * apache2.conf is the main configuration file (this file). It puts the pieces
# together by including all remaining configuration files when starting up the
# web server.
#
# * ports.conf is always included from the main configuration file. It is
# supposed to determine listening ports for incoming connections which can be
# customized anytime.
#
# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
# directories contain particular configuration snippets which manage modules,
# global configuration fragments, or virtual host configurations,
# respectively.
#
# They are activated by symlinking available configuration files from their
# respective *-available/ counterparts. These should be managed by using our
# helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
# their respective man pages for detailed information.
#
# * The binary is called apache2. Due to the use of environment variables, in
# the default configuration, apache2 needs to be started/stopped with
# /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
# work with the default configuration.
# Global configuration
#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
Mutex file:${APACHE_LOCK_DIR} default
#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 5
# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}
#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a
# container, that host's errors will be logged there and not here.
#
ErrorLog ${APACHE_LOG_DIR}/error.log
#
# LogLevel: Control the severity of messages logged to the error_log.
# Available values: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the log level for particular modules, e.g.
# "LogLevel info ssl:warn"
#
LogLevel warn
# Include module configuration:
IncludeOptional mods-enabled/*.load
IncludeOptional mods-enabled/*.conf
# Include list of ports to listen on
Include ports.conf
# Sets the default security model of the Apache2 HTTPD server. It does
# not allow access to the root filesystem outside of /usr/share and /var/www.
# The former is used by web applications packaged in Debian,
# the latter may be used for local directories served by the web server. If
# your system is serving content from a sub-directory in /srv you must allow
# access here, or in any related virtual host.
Options FollowSymLinks
AllowOverride None
Require all denied
AllowOverride None
Require all granted
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
#
AccessFileName .htaccess
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
Require all denied
# The following directives define some format nicknames for use with
# a CustomLog directive.
#
# These deviate from the Common Log Format definitions in that they use %O
# (the actual bytes sent including headers) instead of %b (the size of the
# requested file), because the latter makes it impossible to detect partial
# requests.
#
# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
# Use mod_remoteip instead.
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.
# Include generic snippets of statements
IncludeOptional conf-enabled/*.conf
# Include the virtual host configurations:
IncludeOptional sites-enabled/*.conf
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000154 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/sites-available/ certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/sites-ava0002755 0001750 0001750 00000000000 13544726642 033660 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000170 00000000000 011213 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/sites-available/default.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/sites-ava0000644 0001750 0001750 00000000732 13544726630 033657 0 ustar erica erica 0000000 0000000
ServerName banana.vomit.net
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
ServerName banana.vomit.com
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000174 00000000000 011217 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/sites-available/multi-vhost.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/sites-ava0000644 0001750 0001750 00000002400 13544726630 033651 0 ustar erica erica 0000000 0000000
ServerName 1.multi.vhost.tld
ServerAlias first.multi.vhost.tld
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
ServerName 2.multi.vhost.tld
ServerAlias second.multi.vhost.tld
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
RewriteEngine on
RewriteCond %{DOCUMENT_ROOT}/%{REQUEST_FILENAME} !-f
RewriteRule ^(.*)$ b://u%{REQUEST_URI} [P,NE,L]
RewriteCond %{HTTPS} !=on
RewriteCond %{HTTPS} !^$
RewriteRule ^ https://%{SERVER_NAME}%{REQUEST_URI} [L,NE,R=permanent]
ServerName 3.multi.vhost.tld
ServerAlias third.multi.vhost.tld
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
RewriteEngine on
RewriteRule "^/secrets/(.+)" "https://new.example.com/docs/$1" [R,L]
RewriteRule "^/docs/(.+)" "http://new.example.com/docs/$1" [R,L]
././@LongLink 0000000 0000000 0000000 00000000152 00000000000 011213 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/sites-enabled/ certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/sites-ena0002755 0001750 0001750 00000000000 13544726642 033654 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000166 00000000000 011220 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/sites-enabled/default.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/sites-ena0000644 0001750 0001750 00000000732 13544726630 033653 0 ustar erica erica 0000000 0000000
ServerName banana.vomit.net
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
ServerName banana.vomit.com
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000172 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/sites-enabled/multi-vhost.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/sites-ena0000644 0001750 0001750 00000002400 13544726630 033645 0 ustar erica erica 0000000 0000000
ServerName 1.multi.vhost.tld
ServerAlias first.multi.vhost.tld
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
ServerName 2.multi.vhost.tld
ServerAlias second.multi.vhost.tld
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
RewriteEngine on
RewriteCond %{DOCUMENT_ROOT}/%{REQUEST_FILENAME} !-f
RewriteRule ^(.*)$ b://u%{REQUEST_URI} [P,NE,L]
RewriteCond %{HTTPS} !=on
RewriteCond %{HTTPS} !^$
RewriteRule ^ https://%{SERVER_NAME}%{REQUEST_URI} [L,NE,R=permanent]
ServerName 3.multi.vhost.tld
ServerAlias third.multi.vhost.tld
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
RewriteEngine on
RewriteRule "^/secrets/(.+)" "https://new.example.com/docs/$1" [R,L]
RewriteRule "^/docs/(.+)" "http://new.example.com/docs/$1" [R,L]
certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/envvars 0000644 0001750 0001750 00000001726 13544726630 033453 0 ustar erica erica 0000000 0000000 # envvars - default environment variables for apache2ctl
# this won't be correct after changing uid
unset HOME
# for supporting multiple apache2 instances
if [ "${APACHE_CONFDIR##/etc/apache2-}" != "${APACHE_CONFDIR}" ] ; then
SUFFIX="-${APACHE_CONFDIR##/etc/apache2-}"
else
SUFFIX=
fi
# Since there is no sane way to get the parsed apache2 config in scripts, some
# settings are defined via environment variables and then used in apache2ctl,
# /etc/init.d/apache2, /etc/logrotate.d/apache2, etc.
export APACHE_RUN_USER=www-data
export APACHE_RUN_GROUP=www-data
# temporary state file location. This might be changed to /run in Wheezy+1
export APACHE_PID_FILE=/var/run/apache2/apache2$SUFFIX.pid
export APACHE_RUN_DIR=/var/run/apache2$SUFFIX
export APACHE_LOCK_DIR=/var/lock/apache2$SUFFIX
# Only /var/log/apache2 is handled by /etc/logrotate.d/apache2.
export APACHE_LOG_DIR=/var/log/apache2$SUFFIX
## The locale used by some modules like mod_dav
export LANG=C
export LANG
certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/ 0002755 0001750 0001750 00000000000 13544726642 030647 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/ 0002755 0001750 0001750 00000000000 13544726642 032152 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000147 00000000000 011217 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/ports.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/ports.co0000644 0001750 0001750 00000000615 13544726630 033641 0 ustar erica erica 0000000 0000000 # If you just change the port or add more ports here, you will likely also
# have to change the VirtualHost statement in
# /etc/apache2/sites-enabled/000-default.conf
Listen 80
NameVirtualHost *:80
Listen 443
Listen 443
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
NameVirtualHost *:443
././@LongLink 0000000 0000000 0000000 00000000151 00000000000 011212 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/apache2.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/apache2.0000644 0001750 0001750 00000014610 13544726630 033453 0 ustar erica erica 0000000 0000000 # This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.4/ for detailed information about
# the directives and /usr/share/doc/apache2/README.Debian about Debian specific
# hints.
#
#
# Summary of how the Apache 2 configuration works in Debian:
# The Apache 2 web server configuration in Debian is quite different to
# upstream's suggested way to configure the web server. This is because Debian's
# default Apache2 installation attempts to make adding and removing modules,
# virtual hosts, and extra configuration directives as flexible as possible, in
# order to make automating the changes and administering the server as easy as
# possible.
# It is split into several files forming the configuration hierarchy outlined
# below, all located in the /etc/apache2/ directory:
#
# /etc/apache2/
# |-- apache2.conf
# | `-- ports.conf
# |-- mods-enabled
# | |-- *.load
# | `-- *.conf
# |-- conf-enabled
# | `-- *.conf
# `-- sites-enabled
# `-- *.conf
#
#
# * apache2.conf is the main configuration file (this file). It puts the pieces
# together by including all remaining configuration files when starting up the
# web server.
#
# * ports.conf is always included from the main configuration file. It is
# supposed to determine listening ports for incoming connections which can be
# customized anytime.
#
# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
# directories contain particular configuration snippets which manage modules,
# global configuration fragments, or virtual host configurations,
# respectively.
#
# They are activated by symlinking available configuration files from their
# respective *-available/ counterparts. These should be managed by using our
# helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
# their respective man pages for detailed information.
#
# * The binary is called apache2. Due to the use of environment variables, in
# the default configuration, apache2 needs to be started/stopped with
# /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
# work with the default configuration.
# Global configuration
#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
Mutex file:${APACHE_LOCK_DIR} default
#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 5
# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}
#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a
# container, that host's errors will be logged there and not here.
#
ErrorLog ${APACHE_LOG_DIR}/error.log
#
# LogLevel: Control the severity of messages logged to the error_log.
# Available values: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the log level for particular modules, e.g.
# "LogLevel info ssl:warn"
#
LogLevel warn
# Include module configuration:
IncludeOptional mods-enabled/*.load
IncludeOptional mods-enabled/*.conf
# Include list of ports to listen on
Include ports.conf
# Sets the default security model of the Apache2 HTTPD server. It does
# not allow access to the root filesystem outside of /usr/share and /var/www.
# The former is used by web applications packaged in Debian,
# the latter may be used for local directories served by the web server. If
# your system is serving content from a sub-directory in /srv you must allow
# access here, or in any related virtual host.
Options FollowSymLinks
AllowOverride None
Require all denied
AllowOverride None
Require all granted
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
#
AccessFileName .htaccess
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
Require all denied
#
# The following directives define some format nicknames for use with
# a CustomLog directive.
#
# These deviate from the Common Log Format definitions in that they use %O
# (the actual bytes sent including headers) instead of %b (the size of the
# requested file), because the latter makes it impossible to detect partial
# requests.
#
# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
# Use mod_remoteip instead.
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.
# Include generic snippets of statements
IncludeOptional conf-enabled/*.conf
# Include the virtual host configurations:
IncludeOptional sites-enabled/*.conf
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000155 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/sites-available/ certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/sites-av0002755 0001750 0001750 00000000000 13544726642 033626 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000175 00000000000 011220 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/sites-available/default-ssl.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/sites-av0000644 0001750 0001750 00000002164 13544726630 033626 0 ustar erica erica 0000000 0000000
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# A self-signed (snakeoil) certificate can be created by installing
# the ssl-cert package. See
# /usr/share/doc/apache2/README.Debian.gz for more info.
# If both key and certificate are stored in the same file, only the
# SSLCertificateFile directive is needed.
SSLCertificateFile /etc/apache2/certs/certbot-cert_5.pem
SSLCertificateKeyFile /etc/apache2/ssl/key-certbot_15.pem
SSLOptions +StdEnvVars
SSLOptions +StdEnvVars
BrowserMatch "MSIE [2-6]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# MSIE 7 and newer should be able to use keepalive
BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000175 00000000000 011220 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/sites-available/000-default.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/sites-av0000644 0001750 0001750 00000000447 13544726630 033630 0 ustar erica erica 0000000 0000000
# How well does Certbot work without a ServerName/Alias?
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000154 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-available/ certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-ava0002755 0001750 0001750 00000000000 13544726642 033565 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000176 00000000000 011221 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-available/serve-cgi-bin.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-ava0000644 0001750 0001750 00000000707 13544726630 033566 0 ustar erica erica 0000000 0000000
Define ENABLE_USR_LIB_CGI_BIN
Define ENABLE_USR_LIB_CGI_BIN
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Require all granted
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000171 00000000000 011214 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-available/security.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-ava0000644 0001750 0001750 00000001766 13544726630 033574 0 ustar erica erica 0000000 0000000 # ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minimal | Minor | Major | Prod
# where Full conveys the most information, and Prod the least.
#ServerTokens Minimal
ServerTokens OS
#ServerTokens Full
#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#ServerSignature Off
ServerSignature On
#
# Allow TRACE method
#
# Set to "extended" to also reflect the request body (only for testing and
# diagnostic purposes).
#
# Set to one of: On | Off | extended
TraceEnable Off
#TraceEnable On
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000210 00000000000 011206 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-available/other-vhosts-access-log.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-ava0000644 0001750 0001750 00000000275 13544726630 033566 0 ustar erica erica 0000000 0000000 # Define an access log for VirtualHosts that don't define their own logfile
CustomLog ${APACHE_LOG_DIR}/other_vhosts_access.log vhost_combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000153 00000000000 011214 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/sites-enabled/ certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/sites-en0002755 0001750 0001750 00000000000 13544726642 033622 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000173 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/sites-enabled/000-default.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/sites-en0000644 0001750 0001750 00000000447 13544726630 033624 0 ustar erica erica 0000000 0000000
# How well does Certbot work without a ServerName/Alias?
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/envvars 0000644 0001750 0001750 00000001725 13544726630 033561 0 ustar erica erica 0000000 0000000 # envvars - default environment variables for apache2ctl
# this won't be correct after changing uid
unset HOME
# for supporting multiple apache2 instances
if [ "${APACHE_CONFDIR##/etc/apache2-}" != "${APACHE_CONFDIR}" ] ; then
SUFFIX="-${APACHE_CONFDIR##/etc/apache2-}"
else
SUFFIX=
fi
# Since there is no sane way to get the parsed apache2 config in scripts, some
# settings are defined via environment variables and then used in apache2ctl,
# /etc/init.d/apache2, /etc/logrotate.d/apache2, etc.
export APACHE_RUN_USER=www-data
export APACHE_RUN_GROUP=www-data
# temporary state file location. This might be changed to /run in Wheezy+1
export APACHE_PID_FILE=/var/run/apache2/apache2$SUFFIX.pid
export APACHE_RUN_DIR=/var/run/apache2$SUFFIX
export APACHE_LOCK_DIR=/var/lock/apache2$SUFFIX
# Only /var/log/apache2 is handled by /etc/logrotate.d/apache2.
export APACHE_LOG_DIR=/var/log/apache2$SUFFIX
## The locale used by some modules like mod_dav
export LANG=C
export LANG
././@LongLink 0000000 0000000 0000000 00000000152 00000000000 011213 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-enabled/ certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-ena0002755 0001750 0001750 00000000000 13544726642 033561 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000174 00000000000 011217 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-enabled/serve-cgi-bin.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-ena0000644 0001750 0001750 00000000707 13544726630 033562 0 ustar erica erica 0000000 0000000
Define ENABLE_USR_LIB_CGI_BIN
Define ENABLE_USR_LIB_CGI_BIN
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Require all granted
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000167 00000000000 011221 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-enabled/security.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-ena0000644 0001750 0001750 00000001766 13544726630 033570 0 ustar erica erica 0000000 0000000 # ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minimal | Minor | Major | Prod
# where Full conveys the most information, and Prod the least.
#ServerTokens Minimal
ServerTokens OS
#ServerTokens Full
#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#ServerSignature Off
ServerSignature On
#
# Allow TRACE method
#
# Set to "extended" to also reflect the request body (only for testing and
# diagnostic purposes).
#
# Set to one of: On | Off | extended
TraceEnable Off
#TraceEnable On
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000206 00000000000 011213 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-enabled/other-vhosts-access-log.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-ena0000644 0001750 0001750 00000000275 13544726630 033562 0 ustar erica erica 0000000 0000000 # Define an access log for VirtualHosts that don't define their own logfile
CustomLog ${APACHE_LOG_DIR}/other_vhosts_access.log vhost_combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000154 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/mods-available/ certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/mods-ava0002755 0001750 0001750 00000000000 13544726642 033602 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000164 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/mods-available/ssl.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/mods-ava0000644 0001750 0001750 00000006514 13544726630 033605 0 ustar erica erica 0000000 0000000
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#
SSLRandomSeed startup builtin
SSLRandomSeed startup file:/dev/urandom 512
SSLRandomSeed connect builtin
SSLRandomSeed connect file:/dev/urandom 512
##
## SSL Global Context
##
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
##
#
# Some MIME-types for downloading Certificates and CRLs
#
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog exec:/usr/share/apache2/ask-for-passphrase
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
# (The mechanism dbm has known memory leaks and should not be used).
#SSLSessionCache dbm:${APACHE_RUN_DIR}/ssl_scache
SSLSessionCache shmcb:${APACHE_RUN_DIR}/ssl_scache(512000)
SSLSessionCacheTimeout 300
# Semaphore:
# Configure the path to the mutual exclusion semaphore the
# SSL engine uses internally for inter-process synchronization.
# (Disabled by default, the global Mutex directive consolidates by default
# this)
#Mutex file:${APACHE_LOCK_DIR}/ssl_mutex ssl-cache
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate. See the
# ciphers(1) man page from the openssl package for list of all available
# options.
# Enable only secure ciphers:
SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
# Speed-optimized SSL Cipher configuration:
# If speed is your main concern (on busy HTTPS servers e.g.),
# you might want to force clients to specific, performance
# optimized ciphers. In this case, prepend those ciphers
# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
# Caveat: by giving precedence to RC4-SHA and AES128-SHA
# (as in the example below), most connections will no longer
# have perfect forward secrecy - if the server's key is
# compromised, captures of past or future traffic must be
# considered compromised, too.
#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
#SSLHonorCipherOrder on
# The protocols to enable.
# Available values: all, SSLv3, TLSv1, TLSv1.1, TLSv1.2
# SSL v2 is no longer supported
SSLProtocol all
# Allow insecure renegotiation with clients which do not yet support the
# secure renegotiation protocol. Default: Off
#SSLInsecureRenegotiation on
# Whether to forbid non-SNI clients to access name based virtual hosts.
# Default: Off
#SSLStrictSNIVHostCheck On
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
././@LongLink 0000000 0000000 0000000 00000000164 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/mods-available/ssl.load certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/mods-ava0000644 0001750 0001750 00000000141 13544726630 033573 0 ustar erica erica 0000000 0000000 # Depends: setenvif mime socache_shmcb
LoadModule ssl_module /usr/lib/apache2/modules/mod_ssl.so
certbot-apache-0.39.0/certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/sites 0000644 0001750 0001750 00000000057 13544726630 031716 0 ustar erica erica 0000000 0000000 sites-available/000-default.conf, default.com
certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/ 0002755 0001750 0001750 00000000000 13544726642 025405 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/ 0002755 0001750 0001750 00000000000 13544726642 026626 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/ 0002755 0001750 0001750 00000000000 13544726642 030131 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/ 0002755 0001750 0001750 00000000000 13544726642 032023 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000164 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_default_settings.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_defaul0000644 0001750 0001750 00000012274 13544726630 033506 0 ustar erica erica 0000000 0000000 # This configuration file reflects default settings for Apache HTTP Server.
# You may change these, but chances are that you may not need to.
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Prod
# TraceEnable
# This directive overrides the behavior of TRACE for both the core server and
# mod_proxy. The default TraceEnable on permits TRACE requests per RFC 2616,
# which disallows any request body to accompany the request. TraceEnable off
# causes the core server and mod_proxy to return a 405 (Method not allowed)
# error to the client.
# For security reasons this is turned off by default. (bug #240680)
TraceEnable off
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
EnableMMAP On
EnableSendfile Off
# FileETag: Configures the file attributes that are used to create
# the ETag (entity tag) response header field when the document is
# based on a static file. (The ETag value is used in cache management
# to save network bandwidth.)
FileETag MTime Size
# ContentDigest: This directive enables the generation of Content-MD5
# headers as defined in RFC1864 respectively RFC2616.
# The Content-MD5 header provides an end-to-end message integrity
# check (MIC) of the entity-body. A proxy or client may check this
# header for detecting accidental modification of the entity-body
# in transit.
# Note that this can cause performance problems on your server since
# the message digest is computed on every request (the values are
# not cached).
# Content-MD5 is only sent for documents served by the core, and not
# by any module. For example, SSI documents, output from CGI scripts,
# and byte range responses do not have this header.
ContentDigest Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a
# container, that host's errors will be logged there and not here.
ErrorLog /var/log/apache2/error_log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# We configure the "default" to be a very restrictive set of features.
Options FollowSymLinks
AllowOverride None
Require all denied
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Options can be used for the
# same purpose, but it is much slower.
#
# Do not change this entry unless you know what you are doing.
DirectoryIndex index.html index.html.var
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
Require all denied
# vim: ts=4 filetype=apache
././@LongLink 0000000 0000000 0000000 00000000153 00000000000 011214 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/40_mod_ssl.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/40_mod_ss0000644 0001750 0001750 00000005133 13544726630 033532 0 ustar erica erica 0000000 0000000 # Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailing information about these
# directives see
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
## Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed connect file:/dev/urandom 512
## SSL Global Context:
# All SSL configuration in this context applies both to the main server and
# all SSL-enabled virtual hosts.
# Some MIME-types for downloading Certificates and CRLs
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
## Pass Phrase Dialog:
# Configure the pass phrase gathering process. The filtering dialog program
# (`builtin' is a internal terminal dialog) has to provide the pass phrase on
# stdout.
SSLPassPhraseDialog builtin
## Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism to use and second the
# expiring timeout (in seconds).
#SSLSessionCache dbm:/run/ssl_scache
SSLSessionCache shmcb:/run/ssl_scache(512000)
SSLSessionCacheTimeout 300
## Semaphore:
# Configure the path to the mutual exclusion semaphore the SSL engine uses
# internally for inter-process synchronization.
Mutex file:/run/apache_ssl_mutex ssl-cache
## SSL Compression:
# Known to be vulnerable thus disabled by default (bug #507324).
SSLCompression off
# vim: ts=4 filetype=apache
././@LongLink 0000000 0000000 0000000 00000000162 00000000000 011214 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mod_log_config.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mod_lo0000644 0001750 0001750 00000002756 13544726630 033523 0 ustar erica erica 0000000 0000000
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-Agent}i" agent
LogFormat "%v %h %l %u %t \"%r\" %>s %b %T" script
LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" VLOG=%{VLOG}e" vhost
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" vhostio
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a
# container, they will be logged here. Contrariwise, if you *do*
# define per- access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog /var/log/apache2/access_log common
# If you would like to have agent and referer logfiles,
# uncomment the following directives.
#CustomLog /var/log/apache2/referer_log referer
#CustomLog /var/log/apache2/agent_logs agent
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog /var/log/apache2/access_log combined
# vim: ts=4 filetype=apache
././@LongLink 0000000 0000000 0000000 00000000157 00000000000 011220 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mod_userdir.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mod_us0000644 0001750 0001750 00000001767 13544726630 033541 0 ustar erica erica 0000000 0000000 # Settings for user home directories
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Note that you must also set
# the default access control for these directories, as in the example below.
UserDir public_html
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
AllowOverride FileInfo AuthConfig Limit Indexes
Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
Require all granted
Require all denied
# Suexec isn't really required to run cgi-scripts, but it's a really good
# idea if you have multiple users serving websites...
Options ExecCGI
SetHandler cgi-script
# vim: ts=4 filetype=apache
././@LongLink 0000000 0000000 0000000 00000000154 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mod_info.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mod_in0000644 0001750 0001750 00000000341 13544726630 033503 0 ustar erica erica 0000000 0000000
# Allow remote server configuration reports, with the URL of
# http://servername/server-info
SetHandler server-info
Require local
# vim: ts=4 filetype=apache
././@LongLink 0000000 0000000 0000000 00000000154 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mod_mime.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mod_mi0000644 0001750 0001750 00000003253 13544726630 033507 0 ustar erica erica 0000000 0000000
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig /etc/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
MIMEMagicFile /etc/apache2/magic
# vim: ts=4 filetype=apache
././@LongLink 0000000 0000000 0000000 00000000154 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/46_mod_ldap.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/46_mod_ld0000644 0001750 0001750 00000000626 13544726630 033514 0 ustar erica erica 0000000 0000000 # Examples below are taken from the online documentation
# Refer to:
# http://localhost/manual/mod/mod_ldap.html
# http://localhost/manual/mod/mod_auth_ldap.html
LDAPSharedCacheSize 200000
LDAPCacheEntries 1024
LDAPCacheTTL 600
LDAPOpCacheEntries 1024
LDAPOpCacheTTL 600
SetHandler ldap-status
Require local
# vim: ts=4 filetype=apache
././@LongLink 0000000 0000000 0000000 00000000155 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/41_mod_http2.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/41_mod_ht0000644 0001750 0001750 00000000275 13544726630 033523 0 ustar erica erica 0000000 0000000
# enable debugging for this module
#LogLevel http2:info
#Enable HTTP/2 support
Protocols h2 h2c http/1.1
././@LongLink 0000000 0000000 0000000 00000000156 00000000000 011217 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mod_status.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mod_st0000644 0001750 0001750 00000000712 13544726630 033525 0 ustar erica erica 0000000 0000000
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
SetHandler server-status
Require local
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called.
ExtendedStatus On
# vim: ts=4 filetype=apache
././@LongLink 0000000 0000000 0000000 00000000155 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_languages.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_langua0000644 0001750 0001750 00000011660 13544726630 033513 0 ustar erica erica 0000000 0000000 # Settings for hosting different languages.
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
#
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
#
# It is generally better to not mark a page as
# being a certain language than marking it with the wrong
# language!
#
# DefaultLanguage nl
#
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of charset names and their respective RFCs.
AddCharset us-ascii.ascii .us-ascii
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .arb .arabic
AddCharset ISO-8859-7 .iso8859-7 .grk .greek
AddCharset ISO-8859-8 .iso8859-8 .heb .hebrew
AddCharset ISO-8859-9 .iso8859-9 .latin5 .trk
AddCharset ISO-8859-10 .iso8859-10 .latin6
AddCharset ISO-8859-13 .iso8859-13
AddCharset ISO-8859-14 .iso8859-14 .latin8
AddCharset ISO-8859-15 .iso8859-15 .latin9
AddCharset ISO-8859-16 .iso8859-16 .latin10
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5.Big5 .big5 .b5
AddCharset cn-Big5 .cn-big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8 .koi8
AddCharset KOI8-E .koi8-e
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-U .koi8-u
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-7 .utf7
AddCharset UTF-8 .utf8
AddCharset UTF-16 .utf16
AddCharset UTF-16BE .utf16be
AddCharset UTF-16LE .utf16le
AddCharset UTF-32 .utf32
AddCharset UTF-32BE .utf32be
AddCharset UTF-32LE .utf32le
AddCharset euc-cn .euc-cn
AddCharset euc-gb .euc-gb
AddCharset euc-jp .euc-jp
AddCharset euc-kr .euc-kr
# Not sure how euc-tw got in - IANA doesn't list it???
AddCharset EUC-TW .euc-tw
AddCharset gb2312 .gb2312 .gb
AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2
AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4
AddCharset shift_jis .shift_jis .sjis
# vim: ts=4 filetype=apache
././@LongLink 0000000 0000000 0000000 00000000161 00000000000 011213 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/10_mod_mem_cache.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/10_mod_me0000644 0001750 0001750 00000000316 13544726630 033501 0 ustar erica erica 0000000 0000000
# 128MB cache for objects < 2MB
CacheEnable mem /
MCacheSize 131072
MCacheMaxObjectCount 1000
MCacheMinObjectSize 1
MCacheMaxObjectSize 2097152
# vim: ts=4 filetype=apache
././@LongLink 0000000 0000000 0000000 00000000163 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_error_documents.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_error_0000644 0001750 0001750 00000004730 13544726630 033534 0 ustar erica erica 0000000 0000000 # The configuration below implements multi-language error documents through
# content-negotiation.
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# Required modules: mod_alias, mod_include, mod_negotiation
# We use Alias to redirect any /error/HTTP_.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
# You can modify the messages' appearance without changing any of the
# default HTTP_.html.var files by adding the line:
# Alias /error/include/ "/your/include/path/"
# which allows you to create your own set of files by starting with the
# /var/www/localhost/error/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis. The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
Alias /error/ "/usr/share/apache2/error/"
AllowOverride None
Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
Require all granted
LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
ForceLanguagePriority Prefer Fallback
ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
ErrorDocument 410 /error/HTTP_GONE.html.var
ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
# vim: ts=4 filetype=apache
././@LongLink 0000000 0000000 0000000 00000000161 00000000000 011213 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mod_autoindex.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mod_au0000644 0001750 0001750 00000005503 13544726630 033507 0 ustar erica erica 0000000 0000000
# We include the /icons/ alias for FancyIndexed directory listings. If
# you do not use FancyIndexing, you may comment this out.
Alias /icons/ "/usr/share/apache2/icons/"
Options Indexes MultiViews
AllowOverride None
Require all granted
# Directives controlling the display of server-generated directory listings.
#
# To see the listing of a directory, the Options directive for the
# directory must include "Indexes", and the directory must not contain
# a file matching those listed in the DirectoryIndex directive.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# vim: ts=4 filetype=apache
././@LongLink 0000000 0000000 0000000 00000000153 00000000000 011214 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/45_mod_dav.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/45_mod_da0000644 0001750 0001750 00000001366 13544726630 033502 0 ustar erica erica 0000000 0000000
DavLockDB "/var/lib/dav/lockdb"
# The following directives disable redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with several clients that do not appropriately handle
# redirects for folders with DAV methods.
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "MS FrontPage" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012345678]" redirect-carefully
BrowserMatch "^gnome-vfs/1.0" redirect-carefully
BrowserMatch "^XML Spy" redirect-carefully
BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
# vim: ts=4 filetype=apache
././@LongLink 0000000 0000000 0000000 00000000147 00000000000 011217 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mpm.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mpm.co0000644 0001750 0001750 00000005617 13544726630 033442 0 ustar erica erica 0000000 0000000 # Server-Pool Management (MPM specific)
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
# DO NOT CHANGE UNLESS YOU KNOW WHAT YOU ARE DOING
PidFile /run/apache2.pid
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
# Mutex file:/run/apache_mpm_mutex
# Only one of the below sections will be relevant on your
# installed httpd. Use "/usr/sbin/apache2 -l" to find out the
# active mpm.
# common MPM configuration
# These configuration directives apply to all MPMs
#
# StartServers: Number of child server processes created at startup
# MaxRequestWorkers: Maximum number of child processes to serve requests
# MaxConnectionsPerChild: Limit on the number of connections that an individual
# child server will handle during its life
# prefork MPM
# This is the default MPM if USE=-threads
#
# MinSpareServers: Minimum number of idle child server processes
# MaxSpareServers: Maximum number of idle child server processes
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxRequestWorkers 150
MaxConnectionsPerChild 10000
# worker MPM
# This is the default MPM if USE=threads
#
# MinSpareThreads: Minimum number of idle threads available to handle request spikes
# MaxSpareThreads: Maximum number of idle threads
# ThreadsPerChild: Number of threads created by each child process
StartServers 2
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestWorkers 150
MaxConnectionsPerChild 10000
# event MPM
#
# MinSpareThreads: Minimum number of idle threads available to handle request spikes
# MaxSpareThreads: Maximum number of idle threads
# ThreadsPerChild: Number of threads created by each child process
StartServers 2
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestWorkers 150
MaxConnectionsPerChild 10000
# peruser MPM
#
# MinSpareProcessors: Minimum number of idle child server processes
# MinProcessors: Minimum number of processors per virtual host
# MaxProcessors: Maximum number of processors per virtual host
# ExpireTimeout: Maximum idle time before a child is killed, 0 to disable
# Multiplexer: Specify a Multiplexer child configuration.
# Processor: Specify a user and group for a specific child process
MinSpareProcessors 2
MinProcessors 2
MaxProcessors 10
MaxRequestWorkers 150
MaxConnectionsPerChild 1000
ExpireTimeout 1800
Multiplexer nobody nobody
Processor apache apache
# itk MPM
#
# MinSpareServers: Minimum number of idle child server processes
# MaxSpareServers: Maximum number of idle child server processes
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxRequestWorkers 150
MaxConnectionsPerChild 10000
# vim: ts=4 filetype=apache
certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/vhosts.d/ 0002755 0001750 0001750 00000000000 13544726642 031701 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000162 00000000000 011214 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/vhosts.d/gentoo.example.com.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/vhosts.d/gentoo.exa0000644 0001750 0001750 00000000325 13544726630 033666 0 ustar erica erica 0000000 0000000
ServerName gentoo.example.com
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
././@LongLink 0000000 0000000 0000000 00000000160 00000000000 011212 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/vhosts.d/00_default_vhost.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/vhosts.d/00_default0000644 0001750 0001750 00000002666 13544726630 033554 0 ustar erica erica 0000000 0000000 # Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
#
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.
# see bug #178966 why this is in here
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80
# When virtual hosts are enabled, the main host defined in the default
# httpd.conf configuration will go away. We redefine it here so that it is
# still available.
#
# If you disable this vhost by removing -D DEFAULT_VHOST from
# /etc/conf.d/apache2, the first defined virtual host elsewhere will be
# the default.
ServerName localhost
Include /etc/apache2/vhosts.d/default_vhost.include
ServerEnvironment apache apache
# vim: ts=4 filetype=apache
././@LongLink 0000000 0000000 0000000 00000000164 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/vhosts.d/00_default_ssl_vhost.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/vhosts.d/00_default0000644 0001750 0001750 00000020624 13544726630 033546 0 ustar erica erica 0000000 0000000
# see bug #178966 why this is in here
# When we also provide SSL we have to listen to the HTTPS port
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
# Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
Listen 443
ServerName localhost
Include /etc/apache2/vhosts.d/default_vhost.include
ErrorLog /var/log/apache2/ssl_error_log
TransferLog /var/log/apache2/ssl_access_log
## SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
## SSLProtocol:
# Don't use SSLv2 anymore as it's considered to be broken security-wise.
# Also disable SSLv3 as most modern browsers are capable of TLS.
SSLProtocol ALL -SSLv2 -SSLv3
## SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
# This list of ciphers is recommended by mozilla and was stripped off
# its RC4 ciphers. (bug #506924)
SSLCipherSuite ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128:AES256:HIGH:!RC4:!aNULL:!eNULL:!EXPORT:!DES:!3DES:!MD5:!PSK
## SSLHonorCipherOrder:
# Prefer the server's cipher preference order as the client may have a
# weak default order.
SSLHonorCipherOrder On
## Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If the certificate
# is encrypted, then you will be prompted for a pass phrase. Note that a
# kill -HUP will prompt again. Keep in mind that if you have both an RSA
# and a DSA certificate you can configure both in parallel (to also allow
# the use of DSA ciphers, etc.)
SSLCertificateFile /etc/ssl/apache2/server.crt
## Server Private Key:
# If the key is not combined with the certificate, use this directive to
# point at the key file. Keep in mind that if you've both a RSA and a DSA
# private key you can configure both in parallel (to also allow the use of
# DSA ciphers, etc.)
SSLCertificateKeyFile /etc/ssl/apache2/server.key
## Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the concatenation of
# PEM encoded CA certificates which form the certificate chain for the
# server certificate. Alternatively the referenced file can be the same as
# SSLCertificateFile when the CA certificates are directly appended to the
# server certificate for convinience.
#SSLCertificateChainFile /etc/ssl/apache2/ca.crt
## Certificate Authority (CA):
# Set the CA certificate verification path where to find CA certificates
# for client authentication or alternatively one huge file containing all
# of them (file must be PEM encoded).
# Note: Inside SSLCACertificatePath you need hash symlinks to point to the
# certificate files. Use the provided Makefile to update the hash symlinks
# after changes.
#SSLCACertificatePath /etc/ssl/apache2/ssl.crt
#SSLCACertificateFile /etc/ssl/apache2/ca-bundle.crt
## Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client authentication
# or alternatively one huge file containing all of them (file must be PEM
# encoded).
# Note: Inside SSLCARevocationPath you need hash symlinks to point to the
# certificate files. Use the provided Makefile to update the hash symlinks
# after changes.
#SSLCARevocationPath /etc/ssl/apache2/ssl.crl
#SSLCARevocationFile /etc/ssl/apache2/ca-bundle.crl
## Client Authentication (Type):
# Client certificate verification type and depth. Types are none, optional,
# require and optional_no_ca. Depth is a number which specifies how deeply
# to verify the certificate issuer chain before deciding the certificate is
# not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
## Access Control:
# With SSLRequire you can do per-directory access control based on arbitrary
# complex boolean expressions containing server variable checks and other
# lookup directives. The syntax is a mixture between C and Perl. See the
# mod_ssl documentation for more details.
#
# #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#
## SSL Engine Options:
# Set various options for the SSL engine.
## FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that the
# standard Auth/DBMAuth methods can be used for access control. The user
# name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
## ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the server
# (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates into
# CGI scripts.
## StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the exportation
# for CGI and SSI requests only.
## StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even under
# a "Satisfy any" situation, i.e. when it applies access is denied and no
# other module can change it.
## OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
SSLOptions +StdEnvVars
SSLOptions +StdEnvVars
## SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait
# for the close notify alert from client. When you need a different
# shutdown approach you can use one of the following variables:
## ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates the
# SSL/TLS standard but is needed for some brain-dead browsers. Use this when
# you receive I/O errors because of the standard approach where mod_ssl
# sends the close notify alert.
## ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation works
# correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
## Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a compact
# non-error SSL logfile on a virtual host basis.
CustomLog /var/log/apache2/ssl_request_log \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
# vim: ts=4 filetype=apache
././@LongLink 0000000 0000000 0000000 00000000160 00000000000 011212 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/vhosts.d/default_vhost.include certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/vhosts.d/default_vh0000644 0001750 0001750 00000005364 13544726630 033750 0 ustar erica erica 0000000 0000000 # ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
ServerAdmin root@localhost
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
# If you change this to something that isn't under /var/www then suexec
# will no longer work.
DocumentRoot "/var/www/localhost/htdocs"
# This should be changed to whatever you set DocumentRoot to.
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride All
# Controls who can get stuff from this server.
Require all granted
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/var/www/localhost/cgi-bin/"
# "/var/www/localhost/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
AllowOverride None
Options None
Require all granted
# vim: ts=4 filetype=apache
certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/magic 0000644 0001750 0001750 00000031425 13544726630 031134 0 ustar erica erica 0000000 0000000 # Magic data for mod_mime_magic Apache module (originally for file(1) command)
# The module is described in /manual/mod/mod_mime_magic.html
#
# The format is 4-5 columns:
# Column #1: byte number to begin checking from, ">" indicates continuation
# Column #2: type of data to match
# Column #3: contents of data to match
# Column #4: MIME type of result
# Column #5: MIME encoding of result (optional)
#------------------------------------------------------------------------------
# Localstuff: file(1) magic for locally observed files
# Add any locally observed files here.
#------------------------------------------------------------------------------
# end local stuff
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# Java
0 short 0xcafe
>2 short 0xbabe application/java
#------------------------------------------------------------------------------
# audio: file(1) magic for sound formats
#
# from Jan Nicolai Langfeldt ,
#
# Sun/NeXT audio data
0 string .snd
>12 belong 1 audio/basic
>12 belong 2 audio/basic
>12 belong 3 audio/basic
>12 belong 4 audio/basic
>12 belong 5 audio/basic
>12 belong 6 audio/basic
>12 belong 7 audio/basic
>12 belong 23 audio/x-adpcm
# DEC systems (e.g. DECstation 5000) use a variant of the Sun/NeXT format
# that uses little-endian encoding and has a different magic number
# (0x0064732E in little-endian encoding).
0 lelong 0x0064732E
>12 lelong 1 audio/x-dec-basic
>12 lelong 2 audio/x-dec-basic
>12 lelong 3 audio/x-dec-basic
>12 lelong 4 audio/x-dec-basic
>12 lelong 5 audio/x-dec-basic
>12 lelong 6 audio/x-dec-basic
>12 lelong 7 audio/x-dec-basic
# compressed (G.721 ADPCM)
>12 lelong 23 audio/x-dec-adpcm
# Bytes 0-3 of AIFF, AIFF-C, & 8SVX audio files are "FORM"
# AIFF audio data
8 string AIFF audio/x-aiff
# AIFF-C audio data
8 string AIFC audio/x-aiff
# IFF/8SVX audio data
8 string 8SVX audio/x-aiff
# Creative Labs AUDIO stuff
# Standard MIDI data
0 string MThd audio/unknown
#>9 byte >0 (format %d)
#>11 byte >1 using %d channels
# Creative Music (CMF) data
0 string CTMF audio/unknown
# SoundBlaster instrument data
0 string SBI audio/unknown
# Creative Labs voice data
0 string Creative\ Voice\ File audio/unknown
## is this next line right? it came this way...
#>19 byte 0x1A
#>23 byte >0 - version %d
#>22 byte >0 \b.%d
# [GRR 950115: is this also Creative Labs? Guessing that first line
# should be string instead of unknown-endian long...]
#0 long 0x4e54524b MultiTrack sound data
#0 string NTRK MultiTrack sound data
#>4 long x - version %ld
# Microsoft WAVE format (*.wav)
# [GRR 950115: probably all of the shorts and longs should be leshort/lelong]
# Microsoft RIFF
0 string RIFF audio/unknown
# - WAVE format
>8 string WAVE audio/x-wav
# MPEG audio.
0 beshort&0xfff0 0xfff0 audio/mpeg
# C64 SID Music files, from Linus Walleij
0 string PSID audio/prs.sid
#------------------------------------------------------------------------------
# c-lang: file(1) magic for C programs or various scripts
#
# XPM icons (Greg Roelofs, newt@uchicago.edu)
# ideally should go into "images", but entries below would tag XPM as C source
0 string /*\ XPM image/x-xbm 7bit
# this first will upset you if you're a PL/1 shop... (are there any left?)
# in which case rm it; ascmagic will catch real C programs
# C or REXX program text
0 string /* text/plain
# C++ program text
0 string // text/plain
#------------------------------------------------------------------------------
# compress: file(1) magic for pure-compression formats (no archives)
#
# compress, gzip, pack, compact, huf, squeeze, crunch, freeze, yabba, whap, etc.
#
# Formats for various forms of compressed data
# Formats for "compress" proper have been moved into "compress.c",
# because it tries to uncompress it to figure out what's inside.
# standard unix compress
0 string \037\235 application/octet-stream x-compress
# gzip (GNU zip, not to be confused with [Info-ZIP/PKWARE] zip archiver)
0 string \037\213 application/octet-stream x-gzip
# According to gzip.h, this is the correct byte order for packed data.
0 string \037\036 application/octet-stream
#
# This magic number is byte-order-independent.
#
0 short 017437 application/octet-stream
# XXX - why *two* entries for "compacted data", one of which is
# byte-order independent, and one of which is byte-order dependent?
#
# compacted data
0 short 0x1fff application/octet-stream
0 string \377\037 application/octet-stream
# huf output
0 short 0145405 application/octet-stream
# Squeeze and Crunch...
# These numbers were gleaned from the Unix versions of the programs to
# handle these formats. Note that I can only uncrunch, not crunch, and
# I didn't have a crunched file handy, so the crunch number is untested.
# Keith Waclena
#0 leshort 0x76FF squeezed data (CP/M, DOS)
#0 leshort 0x76FE crunched data (CP/M, DOS)
# Freeze
#0 string \037\237 Frozen file 2.1
#0 string \037\236 Frozen file 1.0 (or gzip 0.5)
# lzh?
#0 string \037\240 LZH compressed data
#------------------------------------------------------------------------------
# frame: file(1) magic for FrameMaker files
#
# This stuff came on a FrameMaker demo tape, most of which is
# copyright, but this file is "published" as witness the following:
#
0 string \
# and Anna Shergold
#
0 string \
0 string \14 byte 12 (OS/2 1.x format)
#>14 byte 64 (OS/2 2.x format)
#>14 byte 40 (Windows 3.x format)
#0 string IC icon
#0 string PI pointer
#0 string CI color icon
#0 string CP color pointer
#0 string BA bitmap array
0 string \x89PNG image/png
0 string FWS application/x-shockwave-flash
0 string CWS application/x-shockwave-flash
#------------------------------------------------------------------------------
# lisp: file(1) magic for lisp programs
#
# various lisp types, from Daniel Quinlan (quinlan@yggdrasil.com)
0 string ;; text/plain 8bit
# Emacs 18 - this is always correct, but not very magical.
0 string \012( application/x-elc
# Emacs 19
0 string ;ELC\023\000\000\000 application/x-elc
#------------------------------------------------------------------------------
# mail.news: file(1) magic for mail and news
#
# There are tests to ascmagic.c to cope with mail and news.
0 string Relay-Version: message/rfc822 7bit
0 string #!\ rnews message/rfc822 7bit
0 string N#!\ rnews message/rfc822 7bit
0 string Forward\ to message/rfc822 7bit
0 string Pipe\ to message/rfc822 7bit
0 string Return-Path: message/rfc822 7bit
0 string Path: message/news 8bit
0 string Xref: message/news 8bit
0 string From: message/rfc822 7bit
0 string Article message/news 8bit
#------------------------------------------------------------------------------
# msword: file(1) magic for MS Word files
#
# Contributor claims:
# Reversed-engineered MS Word magic numbers
#
0 string \376\067\0\043 application/msword
0 string \333\245-\0\0\0 application/msword
# disable this one because it applies also to other
# Office/OLE documents for which msword is not correct. See PR#2608.
#0 string \320\317\021\340\241\261 application/msword
#------------------------------------------------------------------------------
# printer: file(1) magic for printer-formatted files
#
# PostScript
0 string %! application/postscript
0 string \004%! application/postscript
# Acrobat
# (due to clamen@cs.cmu.edu)
0 string %PDF- application/pdf
#------------------------------------------------------------------------------
# sc: file(1) magic for "sc" spreadsheet
#
38 string Spreadsheet application/x-sc
#------------------------------------------------------------------------------
# tex: file(1) magic for TeX files
#
# XXX - needs byte-endian stuff (big-endian and little-endian DVI?)
#
# From
# Although we may know the offset of certain text fields in TeX DVI
# and font files, we can't use them reliably because they are not
# zero terminated. [but we do anyway, christos]
0 string \367\002 application/x-dvi
#0 string \367\203 TeX generic font data
#0 string \367\131 TeX packed font data
#0 string \367\312 TeX virtual font data
#0 string This\ is\ TeX, TeX transcript text
#0 string This\ is\ METAFONT, METAFONT transcript text
# There is no way to detect TeX Font Metric (*.tfm) files without
# breaking them apart and reading the data. The following patterns
# match most *.tfm files generated by METAFONT or afm2tfm.
#2 string \000\021 TeX font metric data
#2 string \000\022 TeX font metric data
#>34 string >\0 (%s)
# Texinfo and GNU Info, from Daniel Quinlan (quinlan@yggdrasil.com)
#0 string \\input\ texinfo Texinfo source text
#0 string This\ is\ Info\ file GNU Info text
# correct TeX magic for Linux (and maybe more)
# from Peter Tobias (tobias@server.et-inf.fho-emden.de)
#
0 leshort 0x02f7 application/x-dvi
# RTF - Rich Text Format
0 string {\\rtf application/rtf
#------------------------------------------------------------------------------
# animation: file(1) magic for animation/movie formats
#
# animation formats, originally from vax@ccwf.cc.utexas.edu (VaX#n8)
# MPEG file
0 string \000\000\001\263 video/mpeg
#
# The contributor claims:
# I couldn't find a real magic number for these, however, this
# -appears- to work. Note that it might catch other files, too,
# so BE CAREFUL!
#
# Note that title and author appear in the two 20-byte chunks
# at decimal offsets 2 and 22, respectively, but they are XOR'ed with
# 255 (hex FF)! DL format SUCKS BIG ROCKS.
#
# DL file version 1 , medium format (160x100, 4 images/screen)
0 byte 1 video/unknown
0 byte 2 video/unknown
# Quicktime video, from Linus Walleij
# from Apple quicktime file format documentation.
4 string moov video/quicktime
4 string mdat video/quicktime
certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/apache2/httpd.conf 0000644 0001750 0001750 00000014237 13544726630 032125 0 ustar erica erica 0000000 0000000 # This is a modification of the default Apache 2.4 configuration file
# for Gentoo Linux.
#
# Support:
# http://www.gentoo.org/main/en/lists.xml [mailing lists]
# http://forums.gentoo.org/ [web forums]
# irc://irc.freenode.net#gentoo-apache [irc chat]
#
# Bug Reports:
# http://bugs.gentoo.org [gentoo related bugs]
# http://httpd.apache.org/bug_report.html [apache httpd related bugs]
#
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See for detailed information.
# In particular, see
#
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "var/log/apache2/foo_log"
# with ServerRoot set to "/usr" will be interpreted by the
# server as "/usr/var/log/apache2/foo.log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
# Comment: The LockFile directive has been replaced by the Mutex directive
ServerRoot "/usr/lib64/apache2"
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
# GENTOO: Automatically defined based on APACHE2_MODULES USE_EXPAND variable.
# Do not change manually, it will be overwritten on upgrade.
#
# The following modules are considered as the default configuration.
# If you wish to disable one of them, you may have to alter other
# configuration directives.
#
# Change these at your own risk!
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule cache_module modules/mod_cache.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_module modules/mod_dav.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dav_lock_module modules/mod_dav_lock.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
LoadModule expires_module modules/mod_expires.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule filter_module modules/mod_filter.so
LoadModule headers_module modules/mod_headers.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule mime_module modules/mod_mime.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
LoadModule speling_module modules/mod_speling.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule status_module modules/mod_status.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule unixd_module modules/mod_unixd.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User apache
Group apache
# Supplemental configuration
#
# Most of the configuration files in the /etc/apache2/modules.d/ directory can
# be turned on using APACHE2_OPTS in /etc/conf.d/apache2 to add extra features
# or to modify the default configuration of the server.
#
# To know which flag to add to APACHE2_OPTS, look at the first line of the
# the file, which will usually be an where OPTION is the
# flag to use.
Include modules.d/*.conf
# Virtual-host support
#
# Gentoo has made using virtual-hosts easy. In /etc/apache2/vhosts.d/ we
# include a default vhost (enabled by adding -D DEFAULT_VHOST to
# APACHE2_OPTS in /etc/conf.d/apache2).
Include vhosts.d/*.conf
# vim: ts=4 filetype=apache
certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/conf.d/ 0002755 0001750 0001750 00000000000 13544726642 027775 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/conf.d/apache2 0000644 0001750 0001750 00000006100 13544726630 031213 0 ustar erica erica 0000000 0000000 # /etc/conf.d/apache2: config file for /etc/init.d/apache2
# When you install a module it is easy to activate or deactivate the modules
# and other features of apache using the APACHE2_OPTS line. Every module should
# install a configuration in /etc/apache2/modules.d. In that file will have an
# directive where NNN is the option to enable that module.
#
# Here are the options available in the default configuration:
#
# AUTH_DIGEST Enables mod_auth_digest
# AUTHNZ_LDAP Enables authentication through mod_ldap (available if USE=ldap)
# CACHE Enables mod_cache
# DAV Enables mod_dav
# ERRORDOCS Enables default error documents for many languages.
# INFO Enables mod_info, a useful module for debugging
# LANGUAGE Enables content-negotiation based on language and charset.
# LDAP Enables mod_ldap (available if USE=ldap)
# MANUAL Enables /manual/ to be the apache manual (available if USE=docs)
# MEM_CACHE Enables default configuration mod_mem_cache
# PROXY Enables mod_proxy
# SSL Enables SSL (available if USE=ssl)
# STATUS Enabled mod_status, a useful module for statistics
# SUEXEC Enables running CGI scripts (in USERDIR) through suexec.
# USERDIR Enables /~username mapping to /home/username/public_html
#
#
# The following two options provide the default virtual host for the HTTP and
# HTTPS protocol. YOU NEED TO ENABLE AT LEAST ONE OF THEM, otherwise apache
# will not listen for incomming connections on the approriate port.
#
# DEFAULT_VHOST Enables name-based virtual hosts, with the default
# virtual host being in /var/www/localhost/htdocs
# SSL_DEFAULT_VHOST Enables default vhost for SSL (you should enable this
# when you enable SSL)
#
APACHE2_OPTS="-D DEFAULT_VHOST -D INFO -D SSL -D SSL_DEFAULT_VHOST -D LANGUAGE"
# Extended options for advanced uses of Apache ONLY
# You don't need to edit these unless you are doing crazy Apache stuff
# As not having them set correctly, or feeding in an incorrect configuration
# via them will result in Apache failing to start
# YOU HAVE BEEN WARNED.
# PID file
#PIDFILE=/var/run/apache2.pid
# timeout for startup/shutdown checks
#TIMEOUT=10
# ServerRoot setting
#SERVERROOT=/usr/lib64/apache2
# Configuration file location
# - If this does NOT start with a '/', then it is treated relative to
# $SERVERROOT by Apache
#CONFIGFILE=/etc/apache2/httpd.conf
# Location to log startup errors to
# They are normally dumped to your terminal.
#STARTUPERRORLOG="/var/log/apache2/startuperror.log"
# A command that outputs a formatted text version of the HTML at the URL
# of the command line. Designed for lynx, however other programs may work.
#LYNX="lynx -dump"
# The URL to your server's mod_status status page.
# Required for status and fullstatus
#STATUSURL="http://localhost/server-status"
# Method to use when reloading the server
# Valid options are 'restart' and 'graceful'
# See http://httpd.apache.org/docs/2.2/stopping.html for information on
# what they do and how they differ.
#RELOAD_TYPE="graceful"
certbot-apache-0.39.0/certbot_apache/tests/testdata/gentoo_apache/apache/sites 0000644 0001750 0001750 00000000215 13544726630 027671 0 ustar erica erica 0000000 0000000 vhosts.d/gentoo.example.com.conf, gentoo.example.com
vhosts.d/00_default_vhost.conf, localhost
vhosts.d/00_default_ssl_vhost.conf, localhost
certbot-apache-0.39.0/certbot_apache/tests/testdata/complex_parsing/ 0002755 0001750 0001750 00000000000 13544726642 026003 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/complex_parsing/apache2.conf 0000644 0001750 0001750 00000002066 13544726630 030154 0 ustar erica erica 0000000 0000000 # Global configuration
PidFile ${APACHE_PID_FILE}
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}
ErrorLog ${APACHE_LOG_DIR}/error.log
LogLevel warn
# Include module configuration:
IncludeOptional mods-enabled/*.load
IncludeOptional mods-enabled/*.conf
Options FollowSymLinks
AllowOverride None
Require all denied
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
# Include generic snippets of statements
IncludeOptional conf-enabled/
# Include the virtual host configurations:
IncludeOptional sites-enabled/*.conf
Define COMPLEX
Define tls_port 1234
Define tls_port_str "1234"
Define fnmatch_filename test_fnmatch.conf
Include test_variables.conf
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
certbot-apache-0.39.0/certbot_apache/tests/testdata/complex_parsing/test_fnmatch.conf 0000644 0001750 0001750 00000000032 13544726630 031317 0 ustar erica erica 0000000 0000000 FNMATCH_DIRECTIVE Success
certbot-apache-0.39.0/certbot_apache/tests/testdata/complex_parsing/conf-enabled/ 0002755 0001750 0001750 00000000000 13544726642 030320 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/complex_parsing/conf-enabled/dummy.conf 0000644 0001750 0001750 00000000413 13544726630 032313 0 ustar erica erica 0000000 0000000 # 3 - one arg directives
# 2 - two arg directives
# 1 - three arg directives
TestArgsDirective one_arg
TestArgsDirective one_arg two_arg
TestArgsDirective one_arg
TestArgsDirective one_arg two_arg
TestArgsDirective one_arg two_arg three_arg
TestArgsDirective one_arg
certbot-apache-0.39.0/certbot_apache/tests/testdata/complex_parsing/test_variables.conf 0000644 0001750 0001750 00000002322 13544726630 031653 0 ustar erica erica 0000000 0000000 TestVariablePort ${tls_port}
TestVariablePortStr "${tls_port_str}"
LoadModule status_module modules/mod_status.so
# Basic IfDefine
VAR_DIRECTIVE success
LoadModule ssl_module modules/mod_ssl.so
INVALID_VAR_DIRECTIVE failure
INVALID_VAR_DIRECTIVE failure
VAR_DIRECTIVE failure
# Basic IfModule
MOD_DIRECTIVE Success
INVALID_MOD_DIRECTIVE failure
INVALID_MOD_DIRECTIVE failure
MOD_DIRECTIVE Success
# Nested Tests
NESTED_DIRECTIVE success
NESTED_DIRECTIVE success
INVALID_NESTED_DIRECTIVE failure
INVALID_NESTED_DIRECTIVE failure
INVALID_NESTED_DIRECTIVE failure
NESTED_DIRECTIVE success
certbot-apache-0.39.0/certbot_apache/tests/testdata/centos6_apache/ 0002755 0001750 0001750 00000000000 13544726642 025473 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos6_apache/apache/ 0002755 0001750 0001750 00000000000 13544726642 026714 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos6_apache/apache/httpd/ 0002755 0001750 0001750 00000000000 13544726642 030037 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos6_apache/apache/httpd/conf/ 0002755 0001750 0001750 00000000000 13544726642 030764 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos6_apache/apache/httpd/conf/httpd.conf 0000644 0001750 0001750 00000103163 13544726630 032755 0 ustar erica erica 0000000 0000000 #
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See for detailed information.
# In particular, see
#
# for a discussion of each configuration directive.
#
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd/logs/foo.log".
#
### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#
#
# Don't give away too much information about all the subcomponents
# we are running. Comment out this line if you don't mind remote sites
# finding out what major optional modules you are running
ServerTokens OS
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at );
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/httpd"
#
# PidFile: The file in which the server should record its process
# identification number when it starts. Note the PIDFILE variable in
# /etc/sysconfig/httpd must be set appropriately if this location is
# changed.
#
PidFile run/httpd.pid
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 60
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive Off
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15
##
## Server-Pool Size Regulation (MPM specific)
##
# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# ServerLimit: maximum value for MaxClients for the lifetime of the server
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
StartServers 8
MinSpareServers 5
MaxSpareServers 20
ServerLimit 256
MaxClients 256
MaxRequestsPerChild 4000
# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
StartServers 4
MaxClients 300
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80
Listen 80
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_alias_module modules/mod_authn_alias.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule expires_module modules/mod_expires.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule cache_module modules/mod_cache.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule version_module modules/mod_version.so
#
# The following modules are not loaded by default:
#
#LoadModule asis_module modules/mod_asis.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule unique_id_module modules/mod_unique_id.so
#
#
# Load config files from the config directory "/etc/httpd/conf.d".
#
Include conf.d/*.conf
#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group #-1 on these systems!
#
User apache
Group apache
### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# definition. These values also provide defaults for
# any containers you may define later in the file.
#
# All of these directives may appear inside containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin root@localhost
#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
#
#ServerName www.example.com:80
#
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
#
UseCanonicalName Off
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/var/www/html"
#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
Options FollowSymLinks
AllowOverride None
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
#
# This should be changed to whatever you set DocumentRoot to.
#
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None
#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all
#
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
#
# The path to the end user account 'public_html' directory must be
# accessible to the webserver userid. This usually means that ~userid
# must have permissions of 711, ~userid/public_html must have permissions
# of 755, and documents contained therein must be world-readable.
# Otherwise, the client will only receive a "403 Forbidden" message.
#
# See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden
#
#
# UserDir is disabled by default since it can confirm the presence
# of a username on the system (depending on home directory
# permissions).
#
UserDir disabled
#
# To enable requests to /~user/ to serve the user's public_html
# directory, remove the "UserDir disabled" line above, and uncomment
# the following line instead:
#
#UserDir public_html
#
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#
#
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#
# Order allow,deny
# Allow from all
#
#
# Order deny,allow
# Deny from all
#
#
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
#
DirectoryIndex index.html index.html.var
#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
#
AccessFileName .htaccess
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
Order allow,deny
Deny from all
Satisfy All
#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
TypesConfig /etc/mime.types
#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
# MIMEMagicFile /usr/share/magic.mime
MIMEMagicFile conf/magic
#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off
#
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs/2.2/mod/core.html#enablemmap
#
#EnableMMAP off
#
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#enablesendfile
#
#EnableSendfile off
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error_log
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# "combinedio" includes actual counts of actual bytes received (%I) and sent (%O); this
# requires the mod_logio module to be loaded.
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a
# container, they will be logged here. Contrariwise, if you *do*
# define per- access logfiles, transactions will be
# logged therein and *not* in this file.
#
#CustomLog logs/access_log common
#
# If you would like to have separate agent and referer logfiles, uncomment
# the following directives.
#
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent
#
# For a single logfile with access, agent, and referer information
# (Combined Logfile Format), use the following directive:
#
CustomLog logs/access_log combined
#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#
ServerSignature On
#
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
#
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
#
Alias /icons/ "/var/www/icons/"
Options Indexes MultiViews FollowSymLinks
AllowOverride None
Order allow,deny
Allow from all
#
# WebDAV module configuration section.
#
# Location of the WebDAV lock database.
DAVLockDB /var/lib/dav/lockdb
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
#
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
AllowOverride None
Options None
Order allow,deny
Allow from all
#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
#
# Directives controlling the display of server-generated directory listings.
#
#
# IndexOptions: Controls the appearance of server-generated directory
# listings.
#
IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable Charset=UTF-8
#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif /core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
#
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif
#
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
#
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
#
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
#
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
#
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
#
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
#
# DefaultLanguage nl
#
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
#
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
#
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
#
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
#
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
#
ForceLanguagePriority Prefer Fallback
#
# Specify a default charset for all content served; this enables
# interpretation of all content as UTF-8 by default. To use the
# default browser choice (ISO-8859-1), or to allow the META tags
# in HTML content to override this choice, comment out this
# directive:
#
AddDefaultCharset UTF-8
#
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#
#AddType application/x-tar .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
#
# MIME-types for downloading Certificates and CRLs
#
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi
#
# For files that include their own HTTP headers:
#
#AddHandler send-as-is asis
#
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
#
AddHandler type-map var
#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#
#
# Putting this all together, we can internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_.html.var files by adding the line:
#
# Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /var/www/error/include/ files and
# copying them to /your/include/path/, even on a per-VirtualHost basis.
#
Alias /error/ "/var/www/error/"
AllowOverride None
Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
Order allow,deny
Allow from all
LanguagePriority en es de fr
ForceLanguagePriority Prefer Fallback
# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
# ErrorDocument 410 /error/HTTP_GONE.html.var
# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
# ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
#
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "MS FrontPage" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully
BrowserMatch "^gnome-vfs/1.0" redirect-carefully
BrowserMatch "^XML Spy" redirect-carefully
BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
#
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
# Change the ".example.com" to match your domain to enable.
#
#
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .example.com
#
#
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".example.com" to match your domain to enable.
#
#
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .example.com
#
#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#
#ProxyRequests On
#
#
# Order deny,allow
# Deny from all
# Allow from .example.com
#
#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#
#ProxyVia On
#
# To enable a cache of proxied content, uncomment the following lines.
# See http://httpd.apache.org/docs/2.2/mod/mod_cache.html for more details.
#
#
# CacheEnable disk /
# CacheRoot "/var/cache/mod_proxy"
#
#
#
# End of proxy directives.
### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
#
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
# Use name-based virtual hosting.
#
#NameVirtualHost *:80
#
# NOTE: NameVirtualHost cannot be used without a port specifier
# (e.g. :80) if mod_ssl is being used, due to the nature of the
# SSL protocol.
#
#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#
# ServerAdmin webmaster@dummy-host.example.com
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#
certbot-apache-0.39.0/certbot_apache/tests/testdata/centos6_apache/apache/httpd/conf.d/ 0002755 0001750 0001750 00000000000 13544726642 031206 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos6_apache/apache/httpd/conf.d/ssl.conf 0000644 0001750 0001750 00000022371 13544726630 032656 0 ustar erica erica 0000000 0000000 #
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailing information about these
# directives see
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
LoadModule ssl_module modules/mod_ssl.so
#
# When we also provide SSL we have to listen to the
# the HTTPS port in addition.
#
Listen 443
##
## SSL Global Context
##
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
##
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
SSLSessionCache shmcb:/var/cache/mod_ssl/scache(512000)
SSLSessionCacheTimeout 300
# Semaphore:
# Configure the path to the mutual exclusion semaphore the
# SSL engine uses internally for inter-process synchronization.
SSLMutex default
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the
# SSL library. The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
SSLRandomSeed startup file:/dev/urandom 256
SSLRandomSeed connect builtin
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed connect file:/dev/urandom 512
#
# Use "SSLCryptoDevice" to enable any supported hardware
# accelerators. Use "openssl engine -v" to list supported
# engine names. NOTE: If you enable an accelerator and the
# server does not start, consult the error logs and ensure
# your accelerator is functioning properly.
#
SSLCryptoDevice builtin
#SSLCryptoDevice ubsec
##
## SSL Virtual Host Context
##
# General setup for the virtual host, inherited from global configuration
#DocumentRoot "/var/www/html"
#ServerName www.example.com:443
# Use separate log files for the SSL virtual host; note that LogLevel
# is not inherited from httpd.conf.
ErrorLog logs/ssl_error_log
TransferLog logs/ssl_access_log
LogLevel warn
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# SSL Protocol support:
# List the enable protocol levels with which clients will be able to
# connect. Disable SSLv2 access by default:
SSLProtocol all -SSLv2
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite DEFAULT:!EXP:!SSLv2:!DES:!IDEA:!SEED:+3DES
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. A new
# certificate can be generated using the genkey(1) command.
SSLCertificateFile /etc/pki/tls/certs/localhost.crt
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /etc/pki/tls/private/localhost.key
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
#SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
#SSLCACertificateFile /etc/pki/tls/certs/ca-bundle.crt
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
SSLOptions +StdEnvVars
SSLOptions +StdEnvVars
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog logs/ssl_request_log \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
certbot-apache-0.39.0/certbot_apache/tests/testdata/centos6_apache/apache/httpd/conf.d/README 0000644 0001750 0001750 00000000610 13544726630 032056 0 ustar erica erica 0000000 0000000
This directory holds Apache 2.0 module-specific configuration files;
any files in this directory which have the ".conf" extension will be
processed as Apache configuration files.
Files are processed in alphabetical order, so if using configuration
directives which depend on, say, mod_perl being loaded, ensure that
these are placed in a filename later in the sort order than "perl.conf".
././@LongLink 0000000 0000000 0000000 00000000155 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos6_apache/apache/httpd/conf.d/test.example.com.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/centos6_apache/apache/httpd/conf.d/test.example.0000644 0001750 0001750 00000000403 13544726630 033610 0 ustar erica erica 0000000 0000000
ServerName test.example.com
ServerAdmin webmaster@dummy-host.example.com
DocumentRoot /var/www/htdocs
ErrorLog logs/dummy-host.example.com-error_log
CustomLog logs/dummy-host.example.com-access_log common
certbot-apache-0.39.0/certbot_apache/tests/testdata/centos6_apache/apache/httpd/conf.d/welcome.conf 0000644 0001750 0001750 00000000453 13544726630 033505 0 ustar erica erica 0000000 0000000 #
# This configuration file enables the default "Welcome"
# page if there is no default index page present for
# the root URL. To disable the Welcome page, comment
# out all the lines below.
#
Options -Indexes
ErrorDocument 403 /error/noindex.html
certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/ 0002755 0001750 0001750 00000000000 13544726642 025474 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/ 0002755 0001750 0001750 00000000000 13544726642 026715 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/ 0002755 0001750 0001750 00000000000 13544726642 030040 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf/ 0002755 0001750 0001750 00000000000 13544726642 030765 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf/magic 0000644 0001750 0001750 00000031425 13544726630 031770 0 ustar erica erica 0000000 0000000 # Magic data for mod_mime_magic Apache module (originally for file(1) command)
# The module is described in /manual/mod/mod_mime_magic.html
#
# The format is 4-5 columns:
# Column #1: byte number to begin checking from, ">" indicates continuation
# Column #2: type of data to match
# Column #3: contents of data to match
# Column #4: MIME type of result
# Column #5: MIME encoding of result (optional)
#------------------------------------------------------------------------------
# Localstuff: file(1) magic for locally observed files
# Add any locally observed files here.
#------------------------------------------------------------------------------
# end local stuff
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# Java
0 short 0xcafe
>2 short 0xbabe application/java
#------------------------------------------------------------------------------
# audio: file(1) magic for sound formats
#
# from Jan Nicolai Langfeldt ,
#
# Sun/NeXT audio data
0 string .snd
>12 belong 1 audio/basic
>12 belong 2 audio/basic
>12 belong 3 audio/basic
>12 belong 4 audio/basic
>12 belong 5 audio/basic
>12 belong 6 audio/basic
>12 belong 7 audio/basic
>12 belong 23 audio/x-adpcm
# DEC systems (e.g. DECstation 5000) use a variant of the Sun/NeXT format
# that uses little-endian encoding and has a different magic number
# (0x0064732E in little-endian encoding).
0 lelong 0x0064732E
>12 lelong 1 audio/x-dec-basic
>12 lelong 2 audio/x-dec-basic
>12 lelong 3 audio/x-dec-basic
>12 lelong 4 audio/x-dec-basic
>12 lelong 5 audio/x-dec-basic
>12 lelong 6 audio/x-dec-basic
>12 lelong 7 audio/x-dec-basic
# compressed (G.721 ADPCM)
>12 lelong 23 audio/x-dec-adpcm
# Bytes 0-3 of AIFF, AIFF-C, & 8SVX audio files are "FORM"
# AIFF audio data
8 string AIFF audio/x-aiff
# AIFF-C audio data
8 string AIFC audio/x-aiff
# IFF/8SVX audio data
8 string 8SVX audio/x-aiff
# Creative Labs AUDIO stuff
# Standard MIDI data
0 string MThd audio/unknown
#>9 byte >0 (format %d)
#>11 byte >1 using %d channels
# Creative Music (CMF) data
0 string CTMF audio/unknown
# SoundBlaster instrument data
0 string SBI audio/unknown
# Creative Labs voice data
0 string Creative\ Voice\ File audio/unknown
## is this next line right? it came this way...
#>19 byte 0x1A
#>23 byte >0 - version %d
#>22 byte >0 \b.%d
# [GRR 950115: is this also Creative Labs? Guessing that first line
# should be string instead of unknown-endian long...]
#0 long 0x4e54524b MultiTrack sound data
#0 string NTRK MultiTrack sound data
#>4 long x - version %ld
# Microsoft WAVE format (*.wav)
# [GRR 950115: probably all of the shorts and longs should be leshort/lelong]
# Microsoft RIFF
0 string RIFF audio/unknown
# - WAVE format
>8 string WAVE audio/x-wav
# MPEG audio.
0 beshort&0xfff0 0xfff0 audio/mpeg
# C64 SID Music files, from Linus Walleij
0 string PSID audio/prs.sid
#------------------------------------------------------------------------------
# c-lang: file(1) magic for C programs or various scripts
#
# XPM icons (Greg Roelofs, newt@uchicago.edu)
# ideally should go into "images", but entries below would tag XPM as C source
0 string /*\ XPM image/x-xbm 7bit
# this first will upset you if you're a PL/1 shop... (are there any left?)
# in which case rm it; ascmagic will catch real C programs
# C or REXX program text
0 string /* text/plain
# C++ program text
0 string // text/plain
#------------------------------------------------------------------------------
# compress: file(1) magic for pure-compression formats (no archives)
#
# compress, gzip, pack, compact, huf, squeeze, crunch, freeze, yabba, whap, etc.
#
# Formats for various forms of compressed data
# Formats for "compress" proper have been moved into "compress.c",
# because it tries to uncompress it to figure out what's inside.
# standard unix compress
0 string \037\235 application/octet-stream x-compress
# gzip (GNU zip, not to be confused with [Info-ZIP/PKWARE] zip archiver)
0 string \037\213 application/octet-stream x-gzip
# According to gzip.h, this is the correct byte order for packed data.
0 string \037\036 application/octet-stream
#
# This magic number is byte-order-independent.
#
0 short 017437 application/octet-stream
# XXX - why *two* entries for "compacted data", one of which is
# byte-order independent, and one of which is byte-order dependent?
#
# compacted data
0 short 0x1fff application/octet-stream
0 string \377\037 application/octet-stream
# huf output
0 short 0145405 application/octet-stream
# Squeeze and Crunch...
# These numbers were gleaned from the Unix versions of the programs to
# handle these formats. Note that I can only uncrunch, not crunch, and
# I didn't have a crunched file handy, so the crunch number is untested.
# Keith Waclena
#0 leshort 0x76FF squeezed data (CP/M, DOS)
#0 leshort 0x76FE crunched data (CP/M, DOS)
# Freeze
#0 string \037\237 Frozen file 2.1
#0 string \037\236 Frozen file 1.0 (or gzip 0.5)
# lzh?
#0 string \037\240 LZH compressed data
#------------------------------------------------------------------------------
# frame: file(1) magic for FrameMaker files
#
# This stuff came on a FrameMaker demo tape, most of which is
# copyright, but this file is "published" as witness the following:
#
0 string \
# and Anna Shergold
#
0 string \
0 string \14 byte 12 (OS/2 1.x format)
#>14 byte 64 (OS/2 2.x format)
#>14 byte 40 (Windows 3.x format)
#0 string IC icon
#0 string PI pointer
#0 string CI color icon
#0 string CP color pointer
#0 string BA bitmap array
0 string \x89PNG image/png
0 string FWS application/x-shockwave-flash
0 string CWS application/x-shockwave-flash
#------------------------------------------------------------------------------
# lisp: file(1) magic for lisp programs
#
# various lisp types, from Daniel Quinlan (quinlan@yggdrasil.com)
0 string ;; text/plain 8bit
# Emacs 18 - this is always correct, but not very magical.
0 string \012( application/x-elc
# Emacs 19
0 string ;ELC\023\000\000\000 application/x-elc
#------------------------------------------------------------------------------
# mail.news: file(1) magic for mail and news
#
# There are tests to ascmagic.c to cope with mail and news.
0 string Relay-Version: message/rfc822 7bit
0 string #!\ rnews message/rfc822 7bit
0 string N#!\ rnews message/rfc822 7bit
0 string Forward\ to message/rfc822 7bit
0 string Pipe\ to message/rfc822 7bit
0 string Return-Path: message/rfc822 7bit
0 string Path: message/news 8bit
0 string Xref: message/news 8bit
0 string From: message/rfc822 7bit
0 string Article message/news 8bit
#------------------------------------------------------------------------------
# msword: file(1) magic for MS Word files
#
# Contributor claims:
# Reversed-engineered MS Word magic numbers
#
0 string \376\067\0\043 application/msword
0 string \333\245-\0\0\0 application/msword
# disable this one because it applies also to other
# Office/OLE documents for which msword is not correct. See PR#2608.
#0 string \320\317\021\340\241\261 application/msword
#------------------------------------------------------------------------------
# printer: file(1) magic for printer-formatted files
#
# PostScript
0 string %! application/postscript
0 string \004%! application/postscript
# Acrobat
# (due to clamen@cs.cmu.edu)
0 string %PDF- application/pdf
#------------------------------------------------------------------------------
# sc: file(1) magic for "sc" spreadsheet
#
38 string Spreadsheet application/x-sc
#------------------------------------------------------------------------------
# tex: file(1) magic for TeX files
#
# XXX - needs byte-endian stuff (big-endian and little-endian DVI?)
#
# From
# Although we may know the offset of certain text fields in TeX DVI
# and font files, we can't use them reliably because they are not
# zero terminated. [but we do anyway, christos]
0 string \367\002 application/x-dvi
#0 string \367\203 TeX generic font data
#0 string \367\131 TeX packed font data
#0 string \367\312 TeX virtual font data
#0 string This\ is\ TeX, TeX transcript text
#0 string This\ is\ METAFONT, METAFONT transcript text
# There is no way to detect TeX Font Metric (*.tfm) files without
# breaking them apart and reading the data. The following patterns
# match most *.tfm files generated by METAFONT or afm2tfm.
#2 string \000\021 TeX font metric data
#2 string \000\022 TeX font metric data
#>34 string >\0 (%s)
# Texinfo and GNU Info, from Daniel Quinlan (quinlan@yggdrasil.com)
#0 string \\input\ texinfo Texinfo source text
#0 string This\ is\ Info\ file GNU Info text
# correct TeX magic for Linux (and maybe more)
# from Peter Tobias (tobias@server.et-inf.fho-emden.de)
#
0 leshort 0x02f7 application/x-dvi
# RTF - Rich Text Format
0 string {\\rtf application/rtf
#------------------------------------------------------------------------------
# animation: file(1) magic for animation/movie formats
#
# animation formats, originally from vax@ccwf.cc.utexas.edu (VaX#n8)
# MPEG file
0 string \000\000\001\263 video/mpeg
#
# The contributor claims:
# I couldn't find a real magic number for these, however, this
# -appears- to work. Note that it might catch other files, too,
# so BE CAREFUL!
#
# Note that title and author appear in the two 20-byte chunks
# at decimal offsets 2 and 22, respectively, but they are XOR'ed with
# 255 (hex FF)! DL format SUCKS BIG ROCKS.
#
# DL file version 1 , medium format (160x100, 4 images/screen)
0 byte 1 video/unknown
0 byte 2 video/unknown
# Quicktime video, from Linus Walleij
# from Apple quicktime file format documentation.
4 string moov video/quicktime
4 string mdat video/quicktime
certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf/httpd.conf 0000644 0001750 0001750 00000026751 13544726630 032765 0 ustar erica erica 0000000 0000000 #
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See for detailed information.
# In particular, see
#
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so 'log/access_log'
# with ServerRoot set to '/www' will be interpreted by the
# server as '/www/log/access_log', where as '/log/access_log' will be
# interpreted as '/log/access_log'.
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "/etc/httpd"
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
Include conf.modules.d/*.conf
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User apache
Group apache
# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# definition. These values also provide defaults for
# any containers you may define later in the file.
#
# All of these directives may appear inside containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin root@localhost
#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80
#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# blocks below.
#
AllowOverride none
Require all denied
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/var/www/html"
#
# Relax access to content within /var/www.
#
AllowOverride None
# Allow open access:
Require all granted
# Further relax access to the default document root:
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None
#
# Controls who can get stuff from this server.
#
Require all granted
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
DirectoryIndex index.html
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
Require all denied
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error_log"
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a
# container, they will be logged here. Contrariwise, if you *do*
# define per- access logfiles, transactions will be
# logged therein and *not* in this file.
#
#CustomLog "logs/access_log" common
#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
CustomLog "logs/access_log" combined
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a section to allow access to
# the filesystem path.
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
#
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
AllowOverride None
Options None
Require all granted
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig /etc/mime.types
#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
#
# Specify a default charset for all content served; this enables
# interpretation of all content as UTF-8 by default. To use the
# default browser choice (ISO-8859-1), or to allow the META tags
# in HTML content to override this choice, comment out this
# directive:
#
AddDefaultCharset UTF-8
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
MIMEMagicFile conf/magic
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#
#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults if commented: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
EnableSendfile on
# Supplemental configuration
#
# Load config files in the "/etc/httpd/conf.d" directory, if any.
IncludeOptional conf.d/*.conf
certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.d/ 0002755 0001750 0001750 00000000000 13544726642 031207 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.d/userdir.conf 0000644 0001750 0001750 00000002344 13544726630 033531 0 ustar erica erica 0000000 0000000 #
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
#
# The path to the end user account 'public_html' directory must be
# accessible to the webserver userid. This usually means that ~userid
# must have permissions of 711, ~userid/public_html must have permissions
# of 755, and documents contained therein must be world-readable.
# Otherwise, the client will only receive a "403 Forbidden" message.
#
#
# UserDir is disabled by default since it can confirm the presence
# of a username on the system (depending on home directory
# permissions).
#
UserDir disabled
#
# To enable requests to /~user/ to serve the user's public_html
# directory, remove the "UserDir disabled" line above, and uncomment
# the following line instead:
#
#UserDir public_html
#
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#
AllowOverride FileInfo AuthConfig Limit Indexes
Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
Require method GET POST OPTIONS
././@LongLink 0000000 0000000 0000000 00000000146 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.d/autoindex.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.d/autoindex.con0000644 0001750 0001750 00000005556 13544726630 033716 0 ustar erica erica 0000000 0000000 #
# Directives controlling the display of server-generated directory listings.
#
# Required modules: mod_authz_core, mod_authz_host,
# mod_autoindex, mod_alias
#
# To see the listing of a directory, the Options directive for the
# directory must include "Indexes", and the directory must not contain
# a file matching those listed in the DirectoryIndex directive.
#
#
# IndexOptions: Controls the appearance of server-generated directory
# listings.
#
IndexOptions FancyIndexing HTMLTable VersionSort
# We include the /icons/ alias for FancyIndexed directory listings. If
# you do not use FancyIndexing, you may comment this out.
#
Alias /icons/ "/usr/share/httpd/icons/"
Options Indexes MultiViews FollowSymlinks
AllowOverride None
Require all granted
#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif /core
AddIcon /icons/bomb.gif */core.*
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
#
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif
#
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
#
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
#
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.d/ssl.conf 0000644 0001750 0001750 00000022116 13544726630 032654 0 ustar erica erica 0000000 0000000 #
# When we also provide SSL we have to listen to the
# the HTTPS port in addition.
#
Listen 443 https
##
## SSL Global Context
##
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
##
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog exec:/usr/libexec/httpd-ssl-pass-dialog
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
SSLSessionCache shmcb:/run/httpd/sslcache(512000)
SSLSessionCacheTimeout 300
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the
# SSL library. The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
SSLRandomSeed startup file:/dev/urandom 256
SSLRandomSeed connect builtin
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed connect file:/dev/urandom 512
#
# Use "SSLCryptoDevice" to enable any supported hardware
# accelerators. Use "openssl engine -v" to list supported
# engine names. NOTE: If you enable an accelerator and the
# server does not start, consult the error logs and ensure
# your accelerator is functioning properly.
#
SSLCryptoDevice builtin
#SSLCryptoDevice ubsec
##
## SSL Virtual Host Context
##
# General setup for the virtual host, inherited from global configuration
#DocumentRoot "/var/www/html"
#ServerName www.example.com:443
# Use separate log files for the SSL virtual host; note that LogLevel
# is not inherited from httpd.conf.
ErrorLog logs/ssl_error_log
TransferLog logs/ssl_access_log
LogLevel warn
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# SSL Protocol support:
# List the enable protocol levels with which clients will be able to
# connect. Disable SSLv2 access by default:
SSLProtocol all -SSLv2
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5:!SEED:!IDEA
# Speed-optimized SSL Cipher configuration:
# If speed is your main concern (on busy HTTPS servers e.g.),
# you might want to force clients to specific, performance
# optimized ciphers. In this case, prepend those ciphers
# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
# Caveat: by giving precedence to RC4-SHA and AES128-SHA
# (as in the example below), most connections will no longer
# have perfect forward secrecy - if the server's key is
# compromised, captures of past or future traffic must be
# considered compromised, too.
#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
#SSLHonorCipherOrder on
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. A new
# certificate can be generated using the genkey(1) command.
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
#SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
#SSLCACertificateFile /etc/pki/tls/certs/ca-bundle.crt
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
SSLOptions +StdEnvVars
SSLOptions +StdEnvVars
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch "MSIE [2-5]" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog logs/ssl_request_log "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
././@LongLink 0000000 0000000 0000000 00000000157 00000000000 011220 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.d/centos.example.com.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.d/centos.exampl0000644 0001750 0001750 00000000325 13544726630 033705 0 ustar erica erica 0000000 0000000
ServerName centos.example.com
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.d/README 0000644 0001750 0001750 00000000556 13544726630 032070 0 ustar erica erica 0000000 0000000
This directory holds configuration files for the Apache HTTP Server;
any files in this directory which have the ".conf" extension will be
processed as httpd configuration files. The directory is used in
addition to the directory /etc/httpd/conf.modules.d/, which contains
configuration files necessary to load modules.
Files are processed in alphabetical order.
certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.d/welcome.conf 0000644 0001750 0001750 00000001470 13544726630 033506 0 ustar erica erica 0000000 0000000 #
# This configuration file enables the default "Welcome" page if there
# is no default index page present for the root URL. To disable the
# Welcome page, comment out all the lines below.
#
# NOTE: if this file is removed, it will be restored on upgrades.
#
Options -Indexes
ErrorDocument 403 /.noindex.html
AllowOverride None
Require all granted
Alias /.noindex.html /usr/share/httpd/noindex/index.html
Alias /noindex/css/bootstrap.min.css /usr/share/httpd/noindex/css/bootstrap.min.css
Alias /noindex/css/open-sans.css /usr/share/httpd/noindex/css/open-sans.css
Alias /images/apache_pb.gif /usr/share/httpd/noindex/images/apache_pb.gif
Alias /images/poweredby.png /usr/share/httpd/noindex/images/poweredby.png
certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/ 0002755 0001750 0001750 00000000000 13544726642 032656 5 ustar erica erica 0000000 0000000 ././@LongLink 0000000 0000000 0000000 00000000153 00000000000 011214 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/01-cgi.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/01-cg0000644 0001750 0001750 00000000703 13544726630 033403 0 ustar erica erica 0000000 0000000 # This configuration file loads a CGI module appropriate to the MPM
# which has been configured in 00-mpm.conf. mod_cgid should be used
# with a threaded MPM; mod_cgi with the prefork MPM.
LoadModule cgid_module modules/mod_cgid.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule cgi_module modules/mod_cgi.so
././@LongLink 0000000 0000000 0000000 00000000153 00000000000 011214 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-dav.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-da0000644 0001750 0001750 00000000213 13544726630 033371 0 ustar erica erica 0000000 0000000 LoadModule dav_module modules/mod_dav.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dav_lock_module modules/mod_dav_lock.so
././@LongLink 0000000 0000000 0000000 00000000157 00000000000 011220 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-systemd.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-sy0000644 0001750 0001750 00000000130 13544726630 033436 0 ustar erica erica 0000000 0000000 # This file configures systemd module:
LoadModule systemd_module modules/mod_systemd.so
././@LongLink 0000000 0000000 0000000 00000000154 00000000000 011215 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-base.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-ba0000644 0001750 0001750 00000007233 13544726630 033400 0 ustar erica erica 0000000 0000000 #
# This file loads most of the modules included with the Apache HTTP
# Server itself.
#
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule allowmethods_module modules/mod_allowmethods.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule cache_module modules/mod_cache.so
LoadModule cache_disk_module modules/mod_cache_disk.so
LoadModule data_module modules/mod_data.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule echo_module modules/mod_echo.so
LoadModule env_module modules/mod_env.so
LoadModule expires_module modules/mod_expires.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule filter_module modules/mod_filter.so
LoadModule headers_module modules/mod_headers.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule mime_module modules/mod_mime.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule remoteip_module modules/mod_remoteip.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
LoadModule socache_dbm_module modules/mod_socache_dbm.so
LoadModule socache_memcache_module modules/mod_socache_memcache.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
LoadModule status_module modules/mod_status.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule unixd_module modules/mod_unixd.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule version_module modules/mod_version.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule dialup_module modules/mod_dialup.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule request_module modules/mod_request.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule speling_module modules/mod_speling.so
././@LongLink 0000000 0000000 0000000 00000000153 00000000000 011214 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-lua.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-lu0000644 0001750 0001750 00000000051 13544726630 033425 0 ustar erica erica 0000000 0000000 LoadModule lua_module modules/mod_lua.so
././@LongLink 0000000 0000000 0000000 00000000153 00000000000 011214 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-mpm.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-mp0000644 0001750 0001750 00000001346 13544726630 033431 0 ustar erica erica 0000000 0000000 # Select the MPM module which should be used by uncommenting exactly
# one of the following LoadModule lines:
# prefork MPM: Implements a non-threaded, pre-forking web server
# See: http://httpd.apache.org/docs/2.4/mod/prefork.html
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
# worker MPM: Multi-Processing Module implementing a hybrid
# multi-threaded multi-process web server
# See: http://httpd.apache.org/docs/2.4/mod/worker.html
#
#LoadModule mpm_worker_module modules/mod_mpm_worker.so
# event MPM: A variant of the worker MPM with the goal of consuming
# threads only for connections with active processing
# See: http://httpd.apache.org/docs/2.4/mod/event.html
#
#LoadModule mpm_event_module modules/mod_mpm_event.so
././@LongLink 0000000 0000000 0000000 00000000153 00000000000 011214 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-ssl.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-ss0000644 0001750 0001750 00000000051 13544726630 033432 0 ustar erica erica 0000000 0000000 LoadModule ssl_module modules/mod_ssl.so
././@LongLink 0000000 0000000 0000000 00000000155 00000000000 011216 L ustar 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-proxy.conf certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-pr0000644 0001750 0001750 00000001675 13544726630 033443 0 ustar erica erica 0000000 0000000 # This file configures all the proxy modules:
LoadModule proxy_module modules/mod_proxy.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_express_module modules/mod_proxy_express.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/sysconfig/ 0002755 0001750 0001750 00000000000 13544726642 030721 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/sysconfig/httpd 0000644 0001750 0001750 00000001572 13544726630 031767 0 ustar erica erica 0000000 0000000 #
# This file can be used to set additional environment variables for
# the httpd process, or pass additional options to the httpd
# executable.
#
# Note: With previous versions of httpd, the MPM could be changed by
# editing an "HTTPD" variable here. With the current version, that
# variable is now ignored. The MPM is a loadable module, and the
# choice of MPM can be changed by editing the configuration file
# /etc/httpd/conf.modules.d/00-mpm.conf.
#
#
# To pass additional options (for instance, -D definitions) to the
# httpd binary at startup, set OPTIONS here.
#
OPTIONS="-D mock_define -D mock_define_too -D mock_value=TRUE -DMOCK_NOSEP -DNOSEP_TWO=NOSEP_VAL"
#
# This setting ensures the httpd process is started in the "C" locale
# by default. (Some modules will not behave correctly if
# case-sensitive string comparisons are performed in a different
# locale.)
#
LANG=C
certbot-apache-0.39.0/certbot_apache/tests/testdata/centos7_apache/apache/sites 0000644 0001750 0001750 00000000063 13544726630 027761 0 ustar erica erica 0000000 0000000 conf.d/centos.example.com.conf, centos.example.com
certbot-apache-0.39.0/certbot_apache/tests/parser_test.py 0000644 0001750 0001750 00000040314 13544726630 023702 0 ustar erica erica 0000000 0000000 # pylint: disable=too-many-public-methods
"""Tests for certbot_apache.parser."""
import shutil
import unittest
import mock
from certbot import errors
from certbot.compat import os
from certbot_apache.tests import util
class BasicParserTest(util.ParserTest):
"""Apache Parser Test."""
def setUp(self): # pylint: disable=arguments-differ
super(BasicParserTest, self).setUp()
def tearDown(self):
shutil.rmtree(self.temp_dir)
shutil.rmtree(self.config_dir)
shutil.rmtree(self.work_dir)
def test_bad_parse(self):
self.parser.parse_file(os.path.join(self.parser.root,
"conf-available", "bad_conf_file.conf"))
self.assertRaises(
errors.PluginError, self.parser.check_parsing_errors, "httpd.aug")
def test_bad_save(self):
mock_save = mock.Mock()
mock_save.side_effect = IOError
self.parser.aug.save = mock_save
self.assertRaises(errors.PluginError, self.parser.unsaved_files)
def test_aug_version(self):
mock_match = mock.Mock(return_value=["something"])
self.parser.aug.match = mock_match
# pylint: disable=protected-access
self.assertEqual(self.parser.check_aug_version(),
["something"])
self.parser.aug.match.side_effect = RuntimeError
self.assertFalse(self.parser.check_aug_version())
def test_find_config_root_no_root(self):
# pylint: disable=protected-access
os.remove(self.parser.loc["root"])
self.assertRaises(
errors.NoInstallationError, self.parser._find_config_root)
def test_parse_file(self):
"""Test parse_file.
certbot.conf is chosen as the test file as it will not be
included during the normal course of execution.
"""
file_path = os.path.join(
self.config_path, "not-parsed-by-default", "certbot.conf")
self.parser.parse_file(file_path) # pylint: disable=protected-access
# search for the httpd incl
matches = self.parser.aug.match(
"/augeas/load/Httpd/incl [. ='%s']" % file_path)
self.assertTrue(matches)
def test_find_dir(self):
test = self.parser.find_dir("Listen", "80")
# This will only look in enabled hosts
test2 = self.parser.find_dir("documentroot")
self.assertEqual(len(test), 1)
self.assertEqual(len(test2), 8)
def test_add_dir(self):
aug_default = "/files" + self.parser.loc["default"]
self.parser.add_dir(aug_default, "AddDirective", "test")
self.assertTrue(
self.parser.find_dir("AddDirective", "test", aug_default))
self.parser.add_dir(aug_default, "AddList", ["1", "2", "3", "4"])
matches = self.parser.find_dir("AddList", None, aug_default)
for i, match in enumerate(matches):
self.assertEqual(self.parser.aug.get(match), str(i + 1))
def test_add_dir_beginning(self):
aug_default = "/files" + self.parser.loc["default"]
self.parser.add_dir_beginning(aug_default,
"AddDirectiveBeginning",
"testBegin")
self.assertTrue(
self.parser.find_dir("AddDirectiveBeginning", "testBegin", aug_default))
self.assertEqual(
self.parser.aug.get(aug_default+"/directive[1]"),
"AddDirectiveBeginning")
self.parser.add_dir_beginning(aug_default, "AddList", ["1", "2", "3", "4"])
matches = self.parser.find_dir("AddList", None, aug_default)
for i, match in enumerate(matches):
self.assertEqual(self.parser.aug.get(match), str(i + 1))
def test_empty_arg(self):
self.assertEqual(None,
self.parser.get_arg("/files/whatever/nonexistent"))
def test_add_dir_to_ifmodssl(self):
"""test add_dir_to_ifmodssl.
Path must be valid before attempting to add to augeas
"""
from certbot_apache.parser import get_aug_path
# This makes sure that find_dir will work
self.parser.modules.add("mod_ssl.c")
self.parser.add_dir_to_ifmodssl(
get_aug_path(self.parser.loc["default"]),
"FakeDirective", ["123"])
matches = self.parser.find_dir("FakeDirective", "123")
self.assertEqual(len(matches), 1)
self.assertTrue("IfModule" in matches[0])
def test_add_dir_to_ifmodssl_multiple(self):
from certbot_apache.parser import get_aug_path
# This makes sure that find_dir will work
self.parser.modules.add("mod_ssl.c")
self.parser.add_dir_to_ifmodssl(
get_aug_path(self.parser.loc["default"]),
"FakeDirective", ["123", "456", "789"])
matches = self.parser.find_dir("FakeDirective")
self.assertEqual(len(matches), 3)
self.assertTrue("IfModule" in matches[0])
def test_get_aug_path(self):
from certbot_apache.parser import get_aug_path
self.assertEqual("/files/etc/apache", get_aug_path("/etc/apache"))
def test_set_locations(self):
with mock.patch("certbot_apache.parser.os.path") as mock_path:
mock_path.isfile.side_effect = [False, False]
# pylint: disable=protected-access
results = self.parser._set_locations()
self.assertEqual(results["default"], results["listen"])
self.assertEqual(results["default"], results["name"])
@mock.patch("certbot_apache.parser.ApacheParser.find_dir")
@mock.patch("certbot_apache.parser.ApacheParser.get_arg")
def test_parse_modules_bad_syntax(self, mock_arg, mock_find):
mock_find.return_value = ["1", "2", "3", "4", "5", "6", "7", "8"]
mock_arg.return_value = None
with mock.patch("certbot_apache.parser.logger") as mock_logger:
self.parser.parse_modules()
# Make sure that we got None return value and logged the file
self.assertTrue(mock_logger.debug.called)
@mock.patch("certbot_apache.parser.ApacheParser.find_dir")
@mock.patch("certbot_apache.parser.ApacheParser._get_runtime_cfg")
def test_update_runtime_variables(self, mock_cfg, _):
define_val = (
'ServerRoot: "/etc/apache2"\n'
'Main DocumentRoot: "/var/www"\n'
'Main ErrorLog: "/var/log/apache2/error.log"\n'
'Mutex ssl-stapling: using_defaults\n'
'Mutex ssl-cache: using_defaults\n'
'Mutex default: dir="/var/lock/apache2" mechanism=fcntl\n'
'Mutex watchdog-callback: using_defaults\n'
'PidFile: "/var/run/apache2/apache2.pid"\n'
'Define: TEST\n'
'Define: DUMP_RUN_CFG\n'
'Define: U_MICH\n'
'Define: TLS=443\n'
'Define: example_path=Documents/path\n'
'User: name="www-data" id=33 not_used\n'
'Group: name="www-data" id=33 not_used\n'
)
inc_val = (
'Included configuration files:\n'
' (*) /etc/apache2/apache2.conf\n'
' (146) /etc/apache2/mods-enabled/access_compat.load\n'
' (146) /etc/apache2/mods-enabled/alias.load\n'
' (146) /etc/apache2/mods-enabled/auth_basic.load\n'
' (146) /etc/apache2/mods-enabled/authn_core.load\n'
' (146) /etc/apache2/mods-enabled/authn_file.load\n'
' (146) /etc/apache2/mods-enabled/authz_core.load\n'
' (146) /etc/apache2/mods-enabled/authz_host.load\n'
' (146) /etc/apache2/mods-enabled/authz_user.load\n'
' (146) /etc/apache2/mods-enabled/autoindex.load\n'
' (146) /etc/apache2/mods-enabled/deflate.load\n'
' (146) /etc/apache2/mods-enabled/dir.load\n'
' (146) /etc/apache2/mods-enabled/env.load\n'
' (146) /etc/apache2/mods-enabled/filter.load\n'
' (146) /etc/apache2/mods-enabled/mime.load\n'
' (146) /etc/apache2/mods-enabled/mpm_event.load\n'
' (146) /etc/apache2/mods-enabled/negotiation.load\n'
' (146) /etc/apache2/mods-enabled/reqtimeout.load\n'
' (146) /etc/apache2/mods-enabled/setenvif.load\n'
' (146) /etc/apache2/mods-enabled/socache_shmcb.load\n'
' (146) /etc/apache2/mods-enabled/ssl.load\n'
' (146) /etc/apache2/mods-enabled/status.load\n'
' (147) /etc/apache2/mods-enabled/alias.conf\n'
' (147) /etc/apache2/mods-enabled/autoindex.conf\n'
' (147) /etc/apache2/mods-enabled/deflate.conf\n'
)
mod_val = (
'Loaded Modules:\n'
' core_module (static)\n'
' so_module (static)\n'
' watchdog_module (static)\n'
' http_module (static)\n'
' log_config_module (static)\n'
' logio_module (static)\n'
' version_module (static)\n'
' unixd_module (static)\n'
' access_compat_module (shared)\n'
' alias_module (shared)\n'
' auth_basic_module (shared)\n'
' authn_core_module (shared)\n'
' authn_file_module (shared)\n'
' authz_core_module (shared)\n'
' authz_host_module (shared)\n'
' authz_user_module (shared)\n'
' autoindex_module (shared)\n'
' deflate_module (shared)\n'
' dir_module (shared)\n'
' env_module (shared)\n'
' filter_module (shared)\n'
' mime_module (shared)\n'
' mpm_event_module (shared)\n'
' negotiation_module (shared)\n'
' reqtimeout_module (shared)\n'
' setenvif_module (shared)\n'
' socache_shmcb_module (shared)\n'
' ssl_module (shared)\n'
' status_module (shared)\n'
)
def mock_get_vars(cmd):
"""Mock command output"""
if cmd[-1] == "DUMP_RUN_CFG":
return define_val
elif cmd[-1] == "DUMP_INCLUDES":
return inc_val
elif cmd[-1] == "DUMP_MODULES":
return mod_val
return None # pragma: no cover
mock_cfg.side_effect = mock_get_vars
expected_vars = {"TEST": "", "U_MICH": "", "TLS": "443",
"example_path": "Documents/path"}
self.parser.modules = set()
with mock.patch(
"certbot_apache.parser.ApacheParser.parse_file") as mock_parse:
self.parser.update_runtime_variables()
self.assertEqual(self.parser.variables, expected_vars)
self.assertEqual(len(self.parser.modules), 58)
# None of the includes in inc_val should be in parsed paths.
# Make sure we tried to include them all.
self.assertEqual(mock_parse.call_count, 25)
@mock.patch("certbot_apache.parser.ApacheParser.find_dir")
@mock.patch("certbot_apache.parser.ApacheParser._get_runtime_cfg")
def test_update_runtime_variables_alt_values(self, mock_cfg, _):
inc_val = (
'Included configuration files:\n'
' (*) {0}\n'
' (146) /etc/apache2/mods-enabled/access_compat.load\n'
' (146) {1}/mods-enabled/alias.load\n'
).format(self.parser.loc["root"],
os.path.dirname(self.parser.loc["root"]))
mock_cfg.return_value = inc_val
self.parser.modules = set()
with mock.patch(
"certbot_apache.parser.ApacheParser.parse_file") as mock_parse:
self.parser.update_runtime_variables()
# No matching modules should have been found
self.assertEqual(len(self.parser.modules), 0)
# Only one of the three includes do not exist in already parsed
# path derived from root configuration Include statements
self.assertEqual(mock_parse.call_count, 1)
@mock.patch("certbot_apache.parser.ApacheParser._get_runtime_cfg")
def test_update_runtime_vars_bad_output(self, mock_cfg):
mock_cfg.return_value = "Define: TLS=443=24"
self.parser.update_runtime_variables()
mock_cfg.return_value = "Define: DUMP_RUN_CFG\nDefine: TLS=443=24"
self.assertRaises(
errors.PluginError, self.parser.update_runtime_variables)
@mock.patch("certbot_apache.configurator.ApacheConfigurator.option")
@mock.patch("certbot_apache.parser.subprocess.Popen")
def test_update_runtime_vars_bad_ctl(self, mock_popen, mock_opt):
mock_popen.side_effect = OSError
mock_opt.return_value = "nonexistent"
self.assertRaises(
errors.MisconfigurationError,
self.parser.update_runtime_variables)
@mock.patch("certbot_apache.parser.subprocess.Popen")
def test_update_runtime_vars_bad_exit(self, mock_popen):
mock_popen().communicate.return_value = ("", "")
mock_popen.returncode = -1
self.assertRaises(
errors.MisconfigurationError,
self.parser.update_runtime_variables)
def test_add_comment(self):
from certbot_apache.parser import get_aug_path
self.parser.add_comment(get_aug_path(self.parser.loc["name"]), "123456")
comm = self.parser.find_comments("123456")
self.assertEqual(len(comm), 1)
self.assertTrue(self.parser.loc["name"] in comm[0])
class ParserInitTest(util.ApacheTest):
def setUp(self): # pylint: disable=arguments-differ
super(ParserInitTest, self).setUp()
def tearDown(self):
shutil.rmtree(self.temp_dir)
shutil.rmtree(self.config_dir)
shutil.rmtree(self.work_dir)
@mock.patch("certbot_apache.parser.ApacheParser.init_augeas")
def test_prepare_no_augeas(self, mock_init_augeas):
from certbot_apache.parser import ApacheParser
mock_init_augeas.side_effect = errors.NoInstallationError
self.config.config_test = mock.Mock()
self.assertRaises(
errors.NoInstallationError, ApacheParser,
os.path.relpath(self.config_path), "/dummy/vhostpath",
version=(2, 4, 22), configurator=self.config)
def test_init_old_aug(self):
from certbot_apache.parser import ApacheParser
with mock.patch("certbot_apache.parser.ApacheParser.check_aug_version") as mock_c:
mock_c.return_value = False
self.assertRaises(
errors.NotSupportedError,
ApacheParser, os.path.relpath(self.config_path),
"/dummy/vhostpath", version=(2, 4, 22), configurator=self.config)
@mock.patch("certbot_apache.parser.ApacheParser._get_runtime_cfg")
def test_unparseable(self, mock_cfg):
from certbot_apache.parser import ApacheParser
mock_cfg.return_value = ('Define: TEST')
self.assertRaises(
errors.PluginError,
ApacheParser, os.path.relpath(self.config_path),
"/dummy/vhostpath", version=(2, 2, 22), configurator=self.config)
def test_root_normalized(self):
from certbot_apache.parser import ApacheParser
with mock.patch("certbot_apache.parser.ApacheParser."
"update_runtime_variables"):
path = os.path.join(
self.temp_dir,
"debian_apache_2_4/////multiple_vhosts/../multiple_vhosts/apache2")
parser = ApacheParser(path, "/dummy/vhostpath", configurator=self.config)
self.assertEqual(parser.root, self.config_path)
def test_root_absolute(self):
from certbot_apache.parser import ApacheParser
with mock.patch("certbot_apache.parser.ApacheParser."
"update_runtime_variables"):
parser = ApacheParser(
os.path.relpath(self.config_path),
"/dummy/vhostpath", configurator=self.config)
self.assertEqual(parser.root, self.config_path)
def test_root_no_trailing_slash(self):
from certbot_apache.parser import ApacheParser
with mock.patch("certbot_apache.parser.ApacheParser."
"update_runtime_variables"):
parser = ApacheParser(
self.config_path + os.path.sep,
"/dummy/vhostpath", configurator=self.config)
self.assertEqual(parser.root, self.config_path)
if __name__ == "__main__":
unittest.main() # pragma: no cover
certbot-apache-0.39.0/certbot_apache/tests/complex_parsing_test.py 0000644 0001750 0001750 00000010714 13544726630 025601 0 ustar erica erica 0000000 0000000 """Tests for certbot_apache.parser."""
import shutil
import unittest
from certbot import errors
from certbot.compat import os
from certbot_apache.tests import util
class ComplexParserTest(util.ParserTest):
"""Apache Parser Test."""
def setUp(self): # pylint: disable=arguments-differ
super(ComplexParserTest, self).setUp(
"complex_parsing", "complex_parsing")
self.setup_variables()
# This needs to happen after due to setup_variables not being run
# until after
self.parser.parse_modules() # pylint: disable=protected-access
def tearDown(self):
shutil.rmtree(self.temp_dir)
shutil.rmtree(self.config_dir)
shutil.rmtree(self.work_dir)
def setup_variables(self):
"""Set up variables for parser."""
self.parser.variables.update(
{
"COMPLEX": "",
"tls_port": "1234",
"fnmatch_filename": "test_fnmatch.conf",
"tls_port_str": "1234"
}
)
def test_filter_args_num(self):
"""Note: This may also fail do to Include conf-enabled/ syntax."""
matches = self.parser.find_dir("TestArgsDirective")
self.assertEqual(len(self.parser.filter_args_num(matches, 1)), 3)
self.assertEqual(len(self.parser.filter_args_num(matches, 2)), 2)
self.assertEqual(len(self.parser.filter_args_num(matches, 3)), 1)
def test_basic_variable_parsing(self):
matches = self.parser.find_dir("TestVariablePort")
self.assertEqual(len(matches), 1)
self.assertEqual(self.parser.get_arg(matches[0]), "1234")
def test_basic_variable_parsing_quotes(self):
matches = self.parser.find_dir("TestVariablePortStr")
self.assertEqual(len(matches), 1)
self.assertEqual(self.parser.get_arg(matches[0]), "1234")
def test_invalid_variable_parsing(self):
del self.parser.variables["tls_port"]
matches = self.parser.find_dir("TestVariablePort")
self.assertRaises(
errors.PluginError, self.parser.get_arg, matches[0])
def test_basic_ifdefine(self):
self.assertEqual(len(self.parser.find_dir("VAR_DIRECTIVE")), 2)
self.assertEqual(len(self.parser.find_dir("INVALID_VAR_DIRECTIVE")), 0)
def test_basic_ifmodule(self):
self.assertEqual(len(self.parser.find_dir("MOD_DIRECTIVE")), 2)
self.assertEqual(
len(self.parser.find_dir("INVALID_MOD_DIRECTIVE")), 0)
def test_nested(self):
self.assertEqual(len(self.parser.find_dir("NESTED_DIRECTIVE")), 3)
self.assertEqual(
len(self.parser.find_dir("INVALID_NESTED_DIRECTIVE")), 0)
def test_load_modules(self):
"""If only first is found, there is bad variable parsing."""
self.assertTrue("status_module" in self.parser.modules)
self.assertTrue("mod_status.c" in self.parser.modules)
# This is in an IfDefine
self.assertTrue("ssl_module" in self.parser.modules)
self.assertTrue("mod_ssl.c" in self.parser.modules)
def verify_fnmatch(self, arg, hit=True):
"""Test if Include was correctly parsed."""
from certbot_apache import parser
self.parser.add_dir(parser.get_aug_path(self.parser.loc["default"]),
"Include", [arg])
if hit:
self.assertTrue(self.parser.find_dir("FNMATCH_DIRECTIVE"))
else:
self.assertFalse(self.parser.find_dir("FNMATCH_DIRECTIVE"))
# NOTE: Only run one test per function otherwise you will have
# inf recursion
def test_include(self):
self.verify_fnmatch("test_fnmatch.?onf")
def test_include_complex(self):
self.verify_fnmatch("../complex_parsing/[te][te]st_*.?onf")
def test_include_fullpath(self):
self.verify_fnmatch(os.path.join(self.config_path,
"test_fnmatch.conf"))
def test_include_fullpath_trailing_slash(self):
self.verify_fnmatch(self.config_path + "//")
def test_include_single_quotes(self):
self.verify_fnmatch("'" + self.config_path + "'")
def test_include_double_quotes(self):
self.verify_fnmatch('"' + self.config_path + '"')
def test_include_variable(self):
self.verify_fnmatch("../complex_parsing/${fnmatch_filename}")
def test_include_missing(self):
# This should miss
self.verify_fnmatch("test_*.onf", False)
if __name__ == "__main__":
unittest.main() # pragma: no cover
certbot-apache-0.39.0/certbot_apache/tests/autohsts_test.py 0000644 0001750 0001750 00000021475 13544726630 024267 0 ustar erica erica 0000000 0000000 # pylint: disable=too-many-public-methods,too-many-lines
"""Test for certbot_apache.configurator AutoHSTS functionality"""
import re
import unittest
import mock
# six is used in mock.patch()
import six # pylint: disable=unused-import
from certbot import errors
from certbot_apache import constants
from certbot_apache.tests import util
class AutoHSTSTest(util.ApacheTest):
"""Tests for AutoHSTS feature"""
# pylint: disable=protected-access
def setUp(self): # pylint: disable=arguments-differ
super(AutoHSTSTest, self).setUp()
self.config = util.get_apache_configurator(
self.config_path, self.vhost_path, self.config_dir, self.work_dir)
self.config.parser.modules.add("headers_module")
self.config.parser.modules.add("mod_headers.c")
self.config.parser.modules.add("ssl_module")
self.config.parser.modules.add("mod_ssl.c")
self.vh_truth = util.get_vh_truth(
self.temp_dir, "debian_apache_2_4/multiple_vhosts")
def get_autohsts_value(self, vh_path):
""" Get value from Strict-Transport-Security header """
header_path = self.config.parser.find_dir("Header", None, vh_path)
if header_path:
pat = '(?:[ "]|^)(strict-transport-security)(?:[ "]|$)'
for head in header_path:
if re.search(pat, self.config.parser.aug.get(head).lower()):
return self.config.parser.aug.get(
head.replace("arg[3]", "arg[4]"))
return None # pragma: no cover
@mock.patch("certbot_apache.configurator.ApacheConfigurator.restart")
@mock.patch("certbot_apache.configurator.ApacheConfigurator.enable_mod")
def test_autohsts_enable_headers_mod(self, mock_enable, _restart):
self.config.parser.modules.discard("headers_module")
self.config.parser.modules.discard("mod_header.c")
self.config.enable_autohsts(mock.MagicMock(), ["ocspvhost.com"])
self.assertTrue(mock_enable.called)
@mock.patch("certbot_apache.configurator.ApacheConfigurator.restart")
def test_autohsts_deploy_already_exists(self, _restart):
self.config.enable_autohsts(mock.MagicMock(), ["ocspvhost.com"])
self.assertRaises(errors.PluginEnhancementAlreadyPresent,
self.config.enable_autohsts,
mock.MagicMock(), ["ocspvhost.com"])
@mock.patch("certbot_apache.constants.AUTOHSTS_FREQ", 0)
@mock.patch("certbot_apache.configurator.ApacheConfigurator.restart")
@mock.patch("certbot_apache.configurator.ApacheConfigurator.prepare")
def test_autohsts_increase(self, mock_prepare, _mock_restart):
self.config._prepared = False
maxage = "\"max-age={0}\""
initial_val = maxage.format(constants.AUTOHSTS_STEPS[0])
inc_val = maxage.format(constants.AUTOHSTS_STEPS[1])
self.config.enable_autohsts(mock.MagicMock(), ["ocspvhost.com"])
# Verify initial value
self.assertEqual(self.get_autohsts_value(self.vh_truth[7].path),
initial_val)
# Increase
self.config.update_autohsts(mock.MagicMock())
# Verify increased value
self.assertEqual(self.get_autohsts_value(self.vh_truth[7].path),
inc_val)
self.assertTrue(mock_prepare.called)
@mock.patch("certbot_apache.configurator.ApacheConfigurator.restart")
@mock.patch("certbot_apache.configurator.ApacheConfigurator._autohsts_increase")
def test_autohsts_increase_noop(self, mock_increase, _restart):
maxage = "\"max-age={0}\""
initial_val = maxage.format(constants.AUTOHSTS_STEPS[0])
self.config.enable_autohsts(mock.MagicMock(), ["ocspvhost.com"])
# Verify initial value
self.assertEqual(self.get_autohsts_value(self.vh_truth[7].path),
initial_val)
self.config.update_autohsts(mock.MagicMock())
# Freq not patched, so value shouldn't increase
self.assertFalse(mock_increase.called)
@mock.patch("certbot_apache.configurator.ApacheConfigurator.restart")
@mock.patch("certbot_apache.constants.AUTOHSTS_FREQ", 0)
def test_autohsts_increase_no_header(self, _restart):
self.config.enable_autohsts(mock.MagicMock(), ["ocspvhost.com"])
# Remove the header
dir_locs = self.config.parser.find_dir("Header", None,
self.vh_truth[7].path)
dir_loc = "/".join(dir_locs[0].split("/")[:-1])
self.config.parser.aug.remove(dir_loc)
self.assertRaises(errors.PluginError,
self.config.update_autohsts,
mock.MagicMock())
@mock.patch("certbot_apache.constants.AUTOHSTS_FREQ", 0)
@mock.patch("certbot_apache.configurator.ApacheConfigurator.restart")
def test_autohsts_increase_and_make_permanent(self, _mock_restart):
maxage = "\"max-age={0}\""
max_val = maxage.format(constants.AUTOHSTS_PERMANENT)
mock_lineage = mock.MagicMock()
mock_lineage.key_path = "/etc/apache2/ssl/key-certbot_15.pem"
self.config.enable_autohsts(mock.MagicMock(), ["ocspvhost.com"])
for i in range(len(constants.AUTOHSTS_STEPS)-1):
# Ensure that value is not made permanent prematurely
self.config.deploy_autohsts(mock_lineage)
self.assertNotEqual(self.get_autohsts_value(self.vh_truth[7].path),
max_val)
self.config.update_autohsts(mock.MagicMock())
# Value should match pre-permanent increment step
cur_val = maxage.format(constants.AUTOHSTS_STEPS[i+1])
self.assertEqual(self.get_autohsts_value(self.vh_truth[7].path),
cur_val)
# Ensure that the value is raised to max
self.assertEqual(self.get_autohsts_value(self.vh_truth[7].path),
maxage.format(constants.AUTOHSTS_STEPS[-1]))
# Make permanent
self.config.deploy_autohsts(mock_lineage)
self.assertEqual(self.get_autohsts_value(self.vh_truth[7].path),
max_val)
def test_autohsts_update_noop(self):
with mock.patch("time.time") as mock_time:
# Time mock is used to make sure that the execution does not
# continue when no autohsts entries exist in pluginstorage
self.config.update_autohsts(mock.MagicMock())
self.assertFalse(mock_time.called)
def test_autohsts_make_permanent_noop(self):
self.config.storage.put = mock.MagicMock()
self.config.deploy_autohsts(mock.MagicMock())
# Make sure that the execution does not continue when no entries in store
self.assertFalse(self.config.storage.put.called)
@mock.patch("certbot_apache.display_ops.select_vhost")
def test_autohsts_no_ssl_vhost(self, mock_select):
mock_select.return_value = self.vh_truth[0]
with mock.patch("certbot_apache.configurator.logger.warning") as mock_log:
self.assertRaises(errors.PluginError,
self.config.enable_autohsts,
mock.MagicMock(), "invalid.example.com")
self.assertTrue(
"Certbot was not able to find SSL" in mock_log.call_args[0][0])
@mock.patch("certbot_apache.configurator.ApacheConfigurator.restart")
@mock.patch("certbot_apache.configurator.ApacheConfigurator.add_vhost_id")
def test_autohsts_dont_enhance_twice(self, mock_id, _restart):
mock_id.return_value = "1234567"
self.config.enable_autohsts(mock.MagicMock(),
["ocspvhost.com", "ocspvhost.com"])
self.assertEqual(mock_id.call_count, 1)
def test_autohsts_remove_orphaned(self):
# pylint: disable=protected-access
self.config._autohsts_fetch_state()
self.config._autohsts["orphan_id"] = {"laststep": 0, "timestamp": 0}
self.config._autohsts_save_state()
self.config.update_autohsts(mock.MagicMock())
self.assertFalse("orphan_id" in self.config._autohsts)
# Make sure it's removed from the pluginstorage file as well
self.config._autohsts = None
self.config._autohsts_fetch_state()
self.assertFalse(self.config._autohsts)
def test_autohsts_make_permanent_vhost_not_found(self):
# pylint: disable=protected-access
self.config._autohsts_fetch_state()
self.config._autohsts["orphan_id"] = {"laststep": 999, "timestamp": 0}
self.config._autohsts_save_state()
with mock.patch("certbot_apache.configurator.logger.warning") as mock_log:
self.config.deploy_autohsts(mock.MagicMock())
self.assertTrue(mock_log.called)
self.assertTrue(
"VirtualHost with id orphan_id was not" in mock_log.call_args[0][0])
if __name__ == "__main__":
unittest.main() # pragma: no cover
certbot-apache-0.39.0/certbot_apache/tests/entrypoint_test.py 0000644 0001750 0001750 00000003525 13544726630 024624 0 ustar erica erica 0000000 0000000 """Test for certbot_apache.entrypoint for override class resolution"""
import unittest
import mock
from certbot_apache import configurator
from certbot_apache import entrypoint
class EntryPointTest(unittest.TestCase):
"""Entrypoint tests"""
_multiprocess_can_split_ = True
def test_get_configurator(self):
with mock.patch("certbot.util.get_os_info") as mock_info:
for distro in entrypoint.OVERRIDE_CLASSES:
return_value = (distro, "whatever")
if distro == 'fedora_old':
return_value = ('fedora', '28')
elif distro == 'fedora':
return_value = ('fedora', '29')
mock_info.return_value = return_value
self.assertEqual(entrypoint.get_configurator(),
entrypoint.OVERRIDE_CLASSES[distro])
def test_nonexistent_like(self):
with mock.patch("certbot.util.get_os_info") as mock_info:
mock_info.return_value = ("nonexistent", "irrelevant")
with mock.patch("certbot.util.get_systemd_os_like") as mock_like:
for like in entrypoint.OVERRIDE_CLASSES:
mock_like.return_value = [like]
self.assertEqual(entrypoint.get_configurator(),
entrypoint.OVERRIDE_CLASSES[like])
def test_nonexistent_generic(self):
with mock.patch("certbot.util.get_os_info") as mock_info:
mock_info.return_value = ("nonexistent", "irrelevant")
with mock.patch("certbot.util.get_systemd_os_like") as mock_like:
mock_like.return_value = ["unknonwn"]
self.assertEqual(entrypoint.get_configurator(),
configurator.ApacheConfigurator)
if __name__ == "__main__":
unittest.main() # pragma: no cover
certbot-apache-0.39.0/certbot_apache/tests/configurator_reverter_test.py 0000644 0001750 0001750 00000005412 13544726630 027026 0 ustar erica erica 0000000 0000000 """Test for certbot_apache.configurator implementations of reverter"""
import shutil
import unittest
import mock
from certbot import errors
from certbot_apache.tests import util
class ConfiguratorReverterTest(util.ApacheTest):
"""Test for ApacheConfigurator reverter methods"""
def setUp(self): # pylint: disable=arguments-differ
super(ConfiguratorReverterTest, self).setUp()
self.config = util.get_apache_configurator(
self.config_path, self.vhost_path, self.config_dir, self.work_dir)
self.vh_truth = util.get_vh_truth(
self.temp_dir, "debian_apache_2_4/multiple_vhosts")
def tearDown(self):
shutil.rmtree(self.config_dir)
shutil.rmtree(self.work_dir)
shutil.rmtree(self.temp_dir)
def test_bad_save_checkpoint(self):
self.config.reverter.add_to_checkpoint = mock.Mock(
side_effect=errors.ReverterError)
self.config.parser.add_dir(
self.vh_truth[0].path, "Test", "bad_save_ckpt")
self.assertRaises(errors.PluginError, self.config.save)
def test_bad_save_finalize_checkpoint(self):
self.config.reverter.finalize_checkpoint = mock.Mock(
side_effect=errors.ReverterError)
self.config.parser.add_dir(
self.vh_truth[0].path, "Test", "bad_save_ckpt")
self.assertRaises(errors.PluginError, self.config.save, "Title")
def test_finalize_save(self):
mock_finalize = mock.Mock()
self.config.reverter = mock_finalize
self.config.save("Example Title")
self.assertTrue(mock_finalize.is_called)
def test_revert_challenge_config(self):
mock_load = mock.Mock()
self.config.parser.aug.load = mock_load
self.config.revert_challenge_config()
self.assertEqual(mock_load.call_count, 1)
def test_revert_challenge_config_error(self):
self.config.reverter.revert_temporary_config = mock.Mock(
side_effect=errors.ReverterError)
self.assertRaises(
errors.PluginError, self.config.revert_challenge_config)
def test_rollback_checkpoints(self):
mock_load = mock.Mock()
self.config.parser.aug.load = mock_load
self.config.rollback_checkpoints()
self.assertEqual(mock_load.call_count, 1)
def test_rollback_error(self):
self.config.reverter.rollback_checkpoints = mock.Mock(
side_effect=errors.ReverterError)
self.assertRaises(errors.PluginError, self.config.rollback_checkpoints)
def test_recovery_routine_reload(self):
mock_load = mock.Mock()
self.config.parser.aug.load = mock_load
self.config.recovery_routine()
self.assertEqual(mock_load.call_count, 1)
if __name__ == "__main__":
unittest.main() # pragma: no cover
certbot-apache-0.39.0/certbot_apache/tests/display_ops_test.py 0000644 0001750 0001750 00000007214 13544726630 024736 0 ustar erica erica 0000000 0000000 """Test certbot_apache.display_ops."""
import unittest
import mock
from certbot import errors
from certbot.display import util as display_util
from certbot.tests import util as certbot_util
from certbot_apache import obj
from certbot_apache.display_ops import select_vhost_multiple
from certbot_apache.tests import util
class SelectVhostMultiTest(unittest.TestCase):
"""Tests for certbot_apache.display_ops.select_vhost_multiple."""
def setUp(self):
self.base_dir = "/example_path"
self.vhosts = util.get_vh_truth(
self.base_dir, "debian_apache_2_4/multiple_vhosts")
def test_select_no_input(self):
self.assertFalse(select_vhost_multiple([]))
@certbot_util.patch_get_utility()
def test_select_correct(self, mock_util):
mock_util().checklist.return_value = (
display_util.OK, [self.vhosts[3].display_repr(),
self.vhosts[2].display_repr()])
vhs = select_vhost_multiple([self.vhosts[3],
self.vhosts[2],
self.vhosts[1]])
self.assertTrue(self.vhosts[2] in vhs)
self.assertTrue(self.vhosts[3] in vhs)
self.assertFalse(self.vhosts[1] in vhs)
@certbot_util.patch_get_utility()
def test_select_cancel(self, mock_util):
mock_util().checklist.return_value = (display_util.CANCEL, "whatever")
vhs = select_vhost_multiple([self.vhosts[2], self.vhosts[3]])
self.assertFalse(vhs)
class SelectVhostTest(unittest.TestCase):
"""Tests for certbot_apache.display_ops.select_vhost."""
def setUp(self):
self.base_dir = "/example_path"
self.vhosts = util.get_vh_truth(
self.base_dir, "debian_apache_2_4/multiple_vhosts")
@classmethod
def _call(cls, vhosts):
from certbot_apache.display_ops import select_vhost
return select_vhost("example.com", vhosts)
@certbot_util.patch_get_utility()
def test_successful_choice(self, mock_util):
mock_util().menu.return_value = (display_util.OK, 3)
self.assertEqual(self.vhosts[3], self._call(self.vhosts))
@certbot_util.patch_get_utility()
def test_noninteractive(self, mock_util):
mock_util().menu.side_effect = errors.MissingCommandlineFlag("no vhost default")
try:
self._call(self.vhosts)
except errors.MissingCommandlineFlag as e:
self.assertTrue("vhost ambiguity" in str(e))
@certbot_util.patch_get_utility()
def test_more_info_cancel(self, mock_util):
mock_util().menu.side_effect = [
(display_util.CANCEL, -1),
]
self.assertEqual(None, self._call(self.vhosts))
def test_no_vhosts(self):
self.assertEqual(self._call([]), None)
@mock.patch("certbot_apache.display_ops.display_util")
@certbot_util.patch_get_utility()
@mock.patch("certbot_apache.display_ops.logger")
def test_small_display(self, mock_logger, mock_util, mock_display_util):
mock_display_util.WIDTH = 20
mock_util().menu.return_value = (display_util.OK, 0)
self._call(self.vhosts)
self.assertEqual(mock_logger.debug.call_count, 1)
@certbot_util.patch_get_utility()
def test_multiple_names(self, mock_util):
mock_util().menu.return_value = (display_util.OK, 5)
self.vhosts.append(
obj.VirtualHost(
"path", "aug_path", set([obj.Addr.fromstring("*:80")]),
False, False,
"wildcard.com", set(["*.wildcard.com"])))
self.assertEqual(self.vhosts[5], self._call(self.vhosts))
if __name__ == "__main__":
unittest.main() # pragma: no cover
certbot-apache-0.39.0/certbot_apache/tests/http_01_test.py 0000644 0001750 0001750 00000022204 13544726630 023663 0 ustar erica erica 0000000 0000000 """Test for certbot_apache.http_01."""
import unittest
import mock
from acme import challenges
from acme.magic_typing import List # pylint: disable=unused-import, no-name-in-module
from certbot import achallenges
from certbot import errors
from certbot.compat import filesystem
from certbot.compat import os
from certbot.tests import acme_util
from certbot_apache.parser import get_aug_path
from certbot_apache.tests import util
NUM_ACHALLS = 3
class ApacheHttp01Test(util.ApacheTest):
"""Test for certbot_apache.http_01.ApacheHttp01."""
def setUp(self, *args, **kwargs): # pylint: disable=arguments-differ
super(ApacheHttp01Test, self).setUp(*args, **kwargs)
self.account_key = self.rsa512jwk
self.achalls = [] # type: List[achallenges.KeyAuthorizationAnnotatedChallenge]
vh_truth = util.get_vh_truth(
self.temp_dir, "debian_apache_2_4/multiple_vhosts")
# Takes the vhosts for encryption-example.demo, certbot.demo
# and vhost.in.rootconf
self.vhosts = [vh_truth[0], vh_truth[3], vh_truth[10]]
for i in range(NUM_ACHALLS):
self.achalls.append(
achallenges.KeyAuthorizationAnnotatedChallenge(
challb=acme_util.chall_to_challb(
challenges.HTTP01(token=((chr(ord('a') + i).encode() * 16))),
"pending"),
domain=self.vhosts[i].name, account_key=self.account_key))
modules = ["ssl", "rewrite", "authz_core", "authz_host"]
for mod in modules:
self.config.parser.modules.add("mod_{0}.c".format(mod))
self.config.parser.modules.add(mod + "_module")
from certbot_apache.http_01 import ApacheHttp01
self.http = ApacheHttp01(self.config)
def test_empty_perform(self):
self.assertFalse(self.http.perform())
@mock.patch("certbot_apache.configurator.ApacheConfigurator.enable_mod")
def test_enable_modules_apache_2_2(self, mock_enmod):
self.config.version = (2, 2)
self.config.parser.modules.remove("authz_host_module")
self.config.parser.modules.remove("mod_authz_host.c")
enmod_calls = self.common_enable_modules_test(mock_enmod)
self.assertEqual(enmod_calls[0][0][0], "authz_host")
@mock.patch("certbot_apache.configurator.ApacheConfigurator.enable_mod")
def test_enable_modules_apache_2_4(self, mock_enmod):
self.config.parser.modules.remove("authz_core_module")
self.config.parser.modules.remove("mod_authz_core.c")
enmod_calls = self.common_enable_modules_test(mock_enmod)
self.assertEqual(enmod_calls[0][0][0], "authz_core")
def common_enable_modules_test(self, mock_enmod):
"""Tests enabling mod_rewrite and other modules."""
self.config.parser.modules.remove("rewrite_module")
self.config.parser.modules.remove("mod_rewrite.c")
self.http.prepare_http01_modules()
self.assertTrue(mock_enmod.called)
calls = mock_enmod.call_args_list
other_calls = []
for call in calls:
if call[0][0] != "rewrite":
other_calls.append(call)
# If these lists are equal, we never enabled mod_rewrite
self.assertNotEqual(calls, other_calls)
return other_calls
def test_same_vhost(self):
vhost = next(v for v in self.config.vhosts if v.name == "certbot.demo")
achalls = [
achallenges.KeyAuthorizationAnnotatedChallenge(
challb=acme_util.chall_to_challb(
challenges.HTTP01(token=((b'a' * 16))),
"pending"),
domain=vhost.name, account_key=self.account_key),
achallenges.KeyAuthorizationAnnotatedChallenge(
challb=acme_util.chall_to_challb(
challenges.HTTP01(token=((b'b' * 16))),
"pending"),
domain=next(iter(vhost.aliases)), account_key=self.account_key)
]
self.common_perform_test(achalls, [vhost])
def test_anonymous_vhost(self):
vhosts = [v for v in self.config.vhosts if not v.ssl]
achalls = [
achallenges.KeyAuthorizationAnnotatedChallenge(
challb=acme_util.chall_to_challb(
challenges.HTTP01(token=((b'a' * 16))),
"pending"),
domain="something.nonexistent", account_key=self.account_key)]
self.common_perform_test(achalls, vhosts)
def test_configure_multiple_vhosts(self):
vhosts = [v for v in self.config.vhosts if "duplicate.example.com" in v.get_names()]
self.assertEqual(len(vhosts), 2)
achalls = [
achallenges.KeyAuthorizationAnnotatedChallenge(
challb=acme_util.chall_to_challb(
challenges.HTTP01(token=((b'a' * 16))),
"pending"),
domain="duplicate.example.com", account_key=self.account_key)]
self.common_perform_test(achalls, vhosts)
def test_no_vhost(self):
for achall in self.achalls:
self.http.add_chall(achall)
self.config.config.http01_port = 12345
self.assertRaises(errors.PluginError, self.http.perform)
def test_perform_1_achall_apache_2_2(self):
self.combinations_perform_test(num_achalls=1, minor_version=2)
def test_perform_1_achall_apache_2_4(self):
self.combinations_perform_test(num_achalls=1, minor_version=4)
def test_perform_2_achall_apache_2_2(self):
self.combinations_perform_test(num_achalls=2, minor_version=2)
def test_perform_2_achall_apache_2_4(self):
self.combinations_perform_test(num_achalls=2, minor_version=4)
def test_perform_3_achall_apache_2_2(self):
self.combinations_perform_test(num_achalls=3, minor_version=2)
def test_perform_3_achall_apache_2_4(self):
self.combinations_perform_test(num_achalls=3, minor_version=4)
def test_activate_disabled_vhost(self):
vhosts = [v for v in self.config.vhosts if v.name == "certbot.demo"]
achalls = [
achallenges.KeyAuthorizationAnnotatedChallenge(
challb=acme_util.chall_to_challb(
challenges.HTTP01(token=((b'a' * 16))),
"pending"),
domain="certbot.demo", account_key=self.account_key)]
vhosts[0].enabled = False
self.common_perform_test(achalls, vhosts)
matches = self.config.parser.find_dir(
"Include", vhosts[0].filep,
get_aug_path(self.config.parser.loc["default"]))
self.assertEqual(len(matches), 1)
def combinations_perform_test(self, num_achalls, minor_version):
"""Test perform with the given achall count and Apache version."""
achalls = self.achalls[:num_achalls]
vhosts = self.vhosts[:num_achalls]
self.config.version = (2, minor_version)
self.common_perform_test(achalls, vhosts)
def common_perform_test(self, achalls, vhosts):
"""Tests perform with the given achalls."""
challenge_dir = self.http.challenge_dir
self.assertFalse(os.path.exists(challenge_dir))
for achall in achalls:
self.http.add_chall(achall)
expected_response = [
achall.response(self.account_key) for achall in achalls]
self.assertEqual(self.http.perform(), expected_response)
self.assertTrue(os.path.isdir(self.http.challenge_dir))
self.assertTrue(filesystem.has_min_permissions(self.http.challenge_dir, 0o755))
self._test_challenge_conf()
for achall in achalls:
self._test_challenge_file(achall)
for vhost in vhosts:
matches = self.config.parser.find_dir("Include",
self.http.challenge_conf_pre,
vhost.path)
self.assertEqual(len(matches), 1)
matches = self.config.parser.find_dir("Include",
self.http.challenge_conf_post,
vhost.path)
self.assertEqual(len(matches), 1)
self.assertTrue(os.path.exists(challenge_dir))
def _test_challenge_conf(self):
with open(self.http.challenge_conf_pre) as f:
pre_conf_contents = f.read()
with open(self.http.challenge_conf_post) as f:
post_conf_contents = f.read()
self.assertTrue("RewriteEngine on" in pre_conf_contents)
self.assertTrue("RewriteRule" in pre_conf_contents)
self.assertTrue(self.http.challenge_dir in post_conf_contents)
if self.config.version < (2, 4):
self.assertTrue("Allow from all" in post_conf_contents)
else:
self.assertTrue("Require all granted" in post_conf_contents)
def _test_challenge_file(self, achall):
name = os.path.join(self.http.challenge_dir, achall.chall.encode("token"))
validation = achall.validation(self.account_key)
self.assertTrue(filesystem.has_min_permissions(name, 0o644))
with open(name, 'rb') as f:
self.assertEqual(f.read(), validation.encode())
if __name__ == "__main__":
unittest.main() # pragma: no cover
certbot-apache-0.39.0/certbot_apache/override_debian.py 0000644 0001750 0001750 00000013144 13544726630 023327 0 ustar erica erica 0000000 0000000 """ Distribution specific override class for Debian family (Ubuntu/Debian) """
import logging
import pkg_resources
import zope.interface
from certbot import errors
from certbot import interfaces
from certbot import util
from certbot.compat import filesystem
from certbot.compat import os
from certbot_apache import apache_util
from certbot_apache import configurator
logger = logging.getLogger(__name__)
@zope.interface.provider(interfaces.IPluginFactory)
class DebianConfigurator(configurator.ApacheConfigurator):
"""Debian specific ApacheConfigurator override class"""
OS_DEFAULTS = dict(
server_root="/etc/apache2",
vhost_root="/etc/apache2/sites-available",
vhost_files="*",
logs_root="/var/log/apache2",
ctl="apache2ctl",
version_cmd=['apache2ctl', '-v'],
restart_cmd=['apache2ctl', 'graceful'],
conftest_cmd=['apache2ctl', 'configtest'],
enmod="a2enmod",
dismod="a2dismod",
le_vhost_ext="-le-ssl.conf",
handle_modules=True,
handle_sites=True,
challenge_location="/etc/apache2",
MOD_SSL_CONF_SRC=pkg_resources.resource_filename(
"certbot_apache", "options-ssl-apache.conf")
)
def enable_site(self, vhost):
"""Enables an available site, Apache reload required.
.. note:: Does not make sure that the site correctly works or that all
modules are enabled appropriately.
:param vhost: vhost to enable
:type vhost: :class:`~certbot_apache.obj.VirtualHost`
:raises .errors.NotSupportedError: If filesystem layout is not
supported.
"""
if vhost.enabled:
return None
enabled_path = ("%s/sites-enabled/%s" %
(self.parser.root,
os.path.basename(vhost.filep)))
if not os.path.isdir(os.path.dirname(enabled_path)):
# For some reason, sites-enabled / sites-available do not exist
# Call the parent method
return super(DebianConfigurator, self).enable_site(vhost)
self.reverter.register_file_creation(False, enabled_path)
try:
os.symlink(vhost.filep, enabled_path)
except OSError as err:
if os.path.islink(enabled_path) and filesystem.realpath(
enabled_path) == vhost.filep:
# Already in shape
vhost.enabled = True
return None
else:
logger.warning(
"Could not symlink %s to %s, got error: %s", enabled_path,
vhost.filep, err.strerror)
errstring = ("Encountered error while trying to enable a " +
"newly created VirtualHost located at {0} by " +
"linking to it from {1}")
raise errors.NotSupportedError(errstring.format(vhost.filep,
enabled_path))
vhost.enabled = True
logger.info("Enabling available site: %s", vhost.filep)
self.save_notes += "Enabled site %s\n" % vhost.filep
return None
def enable_mod(self, mod_name, temp=False):
"""Enables module in Apache.
Both enables and reloads Apache so module is active.
:param str mod_name: Name of the module to enable. (e.g. 'ssl')
:param bool temp: Whether or not this is a temporary action.
:raises .errors.NotSupportedError: If the filesystem layout is not
supported.
:raises .errors.MisconfigurationError: If a2enmod or a2dismod cannot be
run.
"""
avail_path = os.path.join(self.parser.root, "mods-available")
enabled_path = os.path.join(self.parser.root, "mods-enabled")
if not os.path.isdir(avail_path) or not os.path.isdir(enabled_path):
raise errors.NotSupportedError(
"Unsupported directory layout. You may try to enable mod %s "
"and try again." % mod_name)
deps = apache_util.get_mod_deps(mod_name)
# Enable all dependencies
for dep in deps:
if (dep + "_module") not in self.parser.modules:
self._enable_mod_debian(dep, temp)
self.parser.add_mod(dep)
note = "Enabled dependency of %s module - %s" % (mod_name, dep)
if not temp:
self.save_notes += note + os.linesep
logger.debug(note)
# Enable actual module
self._enable_mod_debian(mod_name, temp)
self.parser.add_mod(mod_name)
if not temp:
self.save_notes += "Enabled %s module in Apache\n" % mod_name
logger.info("Enabled Apache %s module", mod_name)
# Modules can enable additional config files. Variables may be defined
# within these new configuration sections.
# Reload is not necessary as DUMP_RUN_CFG uses latest config.
self.parser.update_runtime_variables()
def _enable_mod_debian(self, mod_name, temp):
"""Assumes mods-available, mods-enabled layout."""
# Generate reversal command.
# Try to be safe here... check that we can probably reverse before
# applying enmod command
if not util.exe_exists(self.option("dismod")):
raise errors.MisconfigurationError(
"Unable to find a2dismod, please make sure a2enmod and "
"a2dismod are configured correctly for certbot.")
self.reverter.register_undo_command(
temp, [self.option("dismod"), "-f", mod_name])
util.run_script([self.option("enmod"), mod_name])
certbot-apache-0.39.0/certbot_apache/augeas_lens/ 0002755 0001750 0001750 00000000000 13544726642 022124 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache/augeas_lens/httpd.aug 0000644 0001750 0001750 00000016547 13544726630 023755 0 ustar erica erica 0000000 0000000 (* Apache HTTPD lens for Augeas
Authors:
David Lutterkort
Francis Giraldeau
Raphael Pinson
About: Reference
Online Apache configuration manual: http://httpd.apache.org/docs/trunk/
About: License
This file is licensed under the LGPL v2+.
About: Lens Usage
Sample usage of this lens in augtool
Apache configuration is represented by two main structures, nested sections
and directives. Sections are used as labels, while directives are kept as a
value. Sections and directives can have positional arguments inside values
of "arg" nodes. Arguments of sections must be the firsts child of the
section node.
This lens doesn't support automatic string quoting. Hence, the string must
be quoted when containing a space.
Create a new VirtualHost section with one directive:
> clear /files/etc/apache2/sites-available/foo/VirtualHost
> set /files/etc/apache2/sites-available/foo/VirtualHost/arg "172.16.0.1:80"
> set /files/etc/apache2/sites-available/foo/VirtualHost/directive "ServerAdmin"
> set /files/etc/apache2/sites-available/foo/VirtualHost/*[self::directive="ServerAdmin"]/arg "admin@example.com"
About: Configuration files
This lens applies to files in /etc/httpd and /etc/apache2. See .
*)
module Httpd =
autoload xfm
(******************************************************************
* Utilities lens
*****************************************************************)
let dels (s:string) = del s s
(* The continuation sequence that indicates that we should consider the
* next line part of the current line *)
let cont = /\\\\\r?\n/
(* Whitespace within a line: space, tab, and the continuation sequence *)
let ws = /[ \t]/ | cont
(* Any possible character - '.' does not match \n *)
let any = /(.|\n)/
(* Any character preceded by a backslash *)
let esc_any = /\\\\(.|\n)/
(* Newline sequence - both for Unix and DOS newlines *)
let nl = /\r?\n/
(* Whitespace at the end of a line *)
let eol = del (ws* . nl) "\n"
(* deal with continuation lines *)
let sep_spc = del ws+ " "
let sep_osp = del ws* ""
let sep_eq = del (ws* . "=" . ws*) "="
let nmtoken = /[a-zA-Z:_][a-zA-Z0-9:_.-]*/
let word = /[a-z][a-z0-9._-]*/i
(* A complete line that is either just whitespace or a comment that only
* contains whitespace *)
let empty = [ del (ws* . /#?/ . ws* . nl) "\n" ]
let indent = Util.indent
(* A comment that is not just whitespace. We define it in terms of the
* things that are not allowed as part of such a comment:
* 1) Starts with whitespace
* 2) Ends with whitespace, a backslash or \r
* 3) Unescaped newlines
*)
let comment =
let comment_start = del (ws* . "#" . ws* ) "# " in
let unesc_eol = /[^\]?/ . nl in
let w = /[^\t\n\r \\]/ in
let r = /[\r\\]/ in
let s = /[\t\r ]/ in
(*
* we'd like to write
* let b = /\\\\/ in
* let t = /[\t\n\r ]/ in
* let x = b . (t? . (s|w)* ) in
* but the definition of b depends on commit 244c0edd in 1.9.0 and
* would make the lens unusable with versions before 1.9.0. So we write
* x out which works in older versions, too
*)
let x = /\\\\[\t\n\r ]?[^\n\\]*/ in
let line = ((r . s* . w|w|r) . (s|w)* . x*|(r.s* )?).w.(s*.w)* in
[ label "#comment" . comment_start . store line . eol ]
(* borrowed from shellvars.aug *)
let char_arg_sec = /([^\\ '"\t\r\n>]|[^ '"\t\r\n>]+[^\\ \t\r\n>])|\\\\"|\\\\'|\\\\ /
let char_arg_wl = /([^\\ '"},\t\r\n]|[^ '"},\t\r\n]+[^\\ '"},\t\r\n])/
let dquot =
let no_dquot = /[^"\\\r\n]/
in /"/ . (no_dquot|esc_any)* . /"/
let dquot_msg =
let no_dquot = /([^ \t"\\\r\n]|[^"\\\r\n]+[^ \t"\\\r\n])/
in /"/ . (no_dquot|esc_any)* . no_dquot
let squot =
let no_squot = /[^'\\\r\n]/
in /'/ . (no_squot|esc_any)* . /'/
let comp = /[<>=]?=/
(******************************************************************
* Attributes
*****************************************************************)
(* The arguments for a directive come in two flavors: quoted with single or
* double quotes, or bare. Bare arguments may not start with a single or
* double quote; since we also treat "word lists" special, i.e. lists
* enclosed in curly braces, bare arguments may not start with those,
* either.
*
* Bare arguments may not contain unescaped spaces, but we allow escaping
* with '\\'. Quoted arguments can contain anything, though the quote must
* be escaped with '\\'.
*)
let bare = /([^{"' \t\n\r]|\\\\.)([^ \t\n\r]|\\\\.)*[^ \t\n\r\\]|[^{"' \t\n\r\\]/
let arg_quoted = [ label "arg" . store (dquot|squot) ]
let arg_bare = [ label "arg" . store bare ]
(* message argument starts with " but ends at EOL *)
let arg_dir_msg = [ label "arg" . store dquot_msg ]
let arg_wl = [ label "arg" . store (char_arg_wl+|dquot|squot) ]
(* comma-separated wordlist as permitted in the SSLRequire directive *)
let arg_wordlist =
let wl_start = dels "{" in
let wl_end = dels "}" in
let wl_sep = del /[ \t]*,[ \t]*/ ", "
in [ label "wordlist" . wl_start . arg_wl . (wl_sep . arg_wl)* . wl_end ]
let argv (l:lens) = l . (sep_spc . l)*
(* the arguments of a directive. We use this once we have parsed the name
* of the directive, and the space right after it. When dir_args is used,
* we also know that we have at least one argument. We need to be careful
* with the spacing between arguments: quoted arguments and word lists do
* not need to have space between them, but bare arguments do.
*
* Apache apparently is also happy if the last argument starts with a double
* quote, but has no corresponding closing duoble quote, which is what
* arg_dir_msg handles
*)
let dir_args =
let arg_nospc = arg_quoted|arg_wordlist in
(arg_bare . sep_spc | arg_nospc . sep_osp)* . (arg_bare|arg_nospc|arg_dir_msg)
let directive =
[ indent . label "directive" . store word . (sep_spc . dir_args)? . eol ]
let arg_sec = [ label "arg" . store (char_arg_sec+|comp|dquot|squot) ]
let section (body:lens) =
(* opt_eol includes empty lines *)
let opt_eol = del /([ \t]*#?[ \t]*\r?\n)*/ "\n" in
let inner = (sep_spc . argv arg_sec)? . sep_osp .
dels ">" . opt_eol . ((body|comment) . (body|empty|comment)*)? .
indent . dels "[ \t\n\r]*/ ">\n" ]
let perl_section = [ indent . label "Perl" . del //i ""
. store /[^<]*/
. del /<\/perl>/i "" . eol ]
let rec content = section (content|directive)
| perl_section
let lns = (content|directive|comment|empty)*
let filter = (incl "/etc/apache2/apache2.conf") .
(incl "/etc/apache2/httpd.conf") .
(incl "/etc/apache2/ports.conf") .
(incl "/etc/apache2/conf.d/*") .
(incl "/etc/apache2/conf-available/*.conf") .
(incl "/etc/apache2/mods-available/*") .
(incl "/etc/apache2/sites-available/*") .
(incl "/etc/apache2/vhosts.d/*.conf") .
(incl "/etc/httpd/conf.d/*.conf") .
(incl "/etc/httpd/httpd.conf") .
(incl "/etc/httpd/conf/httpd.conf") .
(incl "/etc/httpd/conf.modules.d/*.conf") .
Util.stdexcl
let xfm = transform lns filter
certbot-apache-0.39.0/certbot_apache/options-ssl-apache.conf 0000644 0001750 0001750 00000003123 13544726630 024210 0 ustar erica erica 0000000 0000000 # This file contains important security parameters. If you modify this file
# manually, Certbot will be unable to automatically provide future security
# updates. Instead, Certbot will print and log an error message with a path to
# the up-to-date file that you will need to refer to when manually updating
# this file.
SSLEngine on
# Intermediate configuration, tweak to your needs
SSLProtocol all -SSLv2 -SSLv3
SSLCipherSuite ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
SSLHonorCipherOrder on
SSLCompression off
SSLOptions +StrictRequire
# Add vhost name to log entries:
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-agent}i\"" vhost_combined
LogFormat "%v %h %l %u %t \"%r\" %>s %b" vhost_common
#CustomLog /var/log/apache2/access.log vhost_combined
#LogLevel warn
#ErrorLog /var/log/apache2/error.log
# Always ensure Cookies have "Secure" set (JAH 2012/1)
#Header edit Set-Cookie (?i)^(.*)(;\s*secure)??((\s*;)?(.*)) "$1; Secure$3$4"
certbot-apache-0.39.0/certbot_apache/override_arch.py 0000644 0001750 0001750 00000001724 13544726630 023023 0 ustar erica erica 0000000 0000000 """ Distribution specific override class for Arch Linux """
import pkg_resources
import zope.interface
from certbot import interfaces
from certbot_apache import configurator
@zope.interface.provider(interfaces.IPluginFactory)
class ArchConfigurator(configurator.ApacheConfigurator):
"""Arch Linux specific ApacheConfigurator override class"""
OS_DEFAULTS = dict(
server_root="/etc/httpd",
vhost_root="/etc/httpd/conf",
vhost_files="*.conf",
logs_root="/var/log/httpd",
ctl="apachectl",
version_cmd=['apachectl', '-v'],
restart_cmd=['apachectl', 'graceful'],
conftest_cmd=['apachectl', 'configtest'],
enmod=None,
dismod=None,
le_vhost_ext="-le-ssl.conf",
handle_modules=False,
handle_sites=False,
challenge_location="/etc/httpd/conf",
MOD_SSL_CONF_SRC=pkg_resources.resource_filename(
"certbot_apache", "options-ssl-apache.conf")
)
certbot-apache-0.39.0/certbot_apache/override_fedora.py 0000644 0001750 0001750 00000007222 13544726630 023345 0 ustar erica erica 0000000 0000000 """ Distribution specific override class for Fedora 29+ """
import pkg_resources
import zope.interface
from certbot import errors
from certbot import interfaces
from certbot import util
from certbot_apache import apache_util
from certbot_apache import configurator
from certbot_apache import parser
@zope.interface.provider(interfaces.IPluginFactory)
class FedoraConfigurator(configurator.ApacheConfigurator):
"""Fedora 29+ specific ApacheConfigurator override class"""
OS_DEFAULTS = dict(
server_root="/etc/httpd",
vhost_root="/etc/httpd/conf.d",
vhost_files="*.conf",
logs_root="/var/log/httpd",
ctl="httpd",
version_cmd=['httpd', '-v'],
restart_cmd=['apachectl', 'graceful'],
restart_cmd_alt=['apachectl', 'restart'],
conftest_cmd=['apachectl', 'configtest'],
enmod=None,
dismod=None,
le_vhost_ext="-le-ssl.conf",
handle_modules=False,
handle_sites=False,
challenge_location="/etc/httpd/conf.d",
MOD_SSL_CONF_SRC=pkg_resources.resource_filename(
# TODO: eventually newest version of Fedora will need their own config
"certbot_apache", "centos-options-ssl-apache.conf")
)
def config_test(self):
"""
Override config_test to mitigate configtest error in vanilla installation
of mod_ssl in Fedora. The error is caused by non-existent self-signed
certificates referenced by the configuration, that would be autogenerated
during the first (re)start of httpd.
"""
try:
super(FedoraConfigurator, self).config_test()
except errors.MisconfigurationError:
self._try_restart_fedora()
def get_parser(self):
"""Initializes the ApacheParser"""
return FedoraParser(
self.option("server_root"), self.option("vhost_root"),
self.version, configurator=self)
def _try_restart_fedora(self):
"""
Tries to restart httpd using systemctl to generate the self signed keypair.
"""
try:
util.run_script(['systemctl', 'restart', 'httpd'])
except errors.SubprocessError as err:
raise errors.MisconfigurationError(str(err))
# Finish with actual config check to see if systemctl restart helped
super(FedoraConfigurator, self).config_test()
def _prepare_options(self):
"""
Override the options dictionary initialization to keep using apachectl
instead of httpd and so take advantages of this new bash script in newer versions
of Fedora to restart httpd.
"""
super(FedoraConfigurator, self)._prepare_options()
self.options["restart_cmd"][0] = 'apachectl'
self.options["restart_cmd_alt"][0] = 'apachectl'
self.options["conftest_cmd"][0] = 'apachectl'
class FedoraParser(parser.ApacheParser):
"""Fedora 29+ specific ApacheParser override class"""
def __init__(self, *args, **kwargs):
# Fedora 29+ specific configuration file for Apache
self.sysconfig_filep = "/etc/sysconfig/httpd"
super(FedoraParser, self).__init__(*args, **kwargs)
def update_runtime_variables(self):
""" Override for update_runtime_variables for custom parsing """
# Opportunistic, works if SELinux not enforced
super(FedoraParser, self).update_runtime_variables()
self._parse_sysconfig_var()
def _parse_sysconfig_var(self):
""" Parses Apache CLI options from Fedora configuration file """
defines = apache_util.parse_define_file(self.sysconfig_filep, "OPTIONS")
for k in defines:
self.variables[k] = defines[k]
certbot-apache-0.39.0/certbot_apache/override_gentoo.py 0000644 0001750 0001750 00000005272 13544726630 023403 0 ustar erica erica 0000000 0000000 """ Distribution specific override class for Gentoo Linux """
import pkg_resources
import zope.interface
from certbot import interfaces
from certbot_apache import apache_util
from certbot_apache import configurator
from certbot_apache import parser
@zope.interface.provider(interfaces.IPluginFactory)
class GentooConfigurator(configurator.ApacheConfigurator):
"""Gentoo specific ApacheConfigurator override class"""
OS_DEFAULTS = dict(
server_root="/etc/apache2",
vhost_root="/etc/apache2/vhosts.d",
vhost_files="*.conf",
logs_root="/var/log/apache2",
ctl="apache2ctl",
version_cmd=['apache2ctl', '-v'],
restart_cmd=['apache2ctl', 'graceful'],
restart_cmd_alt=['apache2ctl', 'restart'],
conftest_cmd=['apache2ctl', 'configtest'],
enmod=None,
dismod=None,
le_vhost_ext="-le-ssl.conf",
handle_modules=False,
handle_sites=False,
challenge_location="/etc/apache2/vhosts.d",
MOD_SSL_CONF_SRC=pkg_resources.resource_filename(
"certbot_apache", "options-ssl-apache.conf")
)
def _prepare_options(self):
"""
Override the options dictionary initialization in order to support
alternative restart cmd used in Gentoo.
"""
super(GentooConfigurator, self)._prepare_options()
self.options["restart_cmd_alt"][0] = self.option("ctl")
def get_parser(self):
"""Initializes the ApacheParser"""
return GentooParser(
self.option("server_root"), self.option("vhost_root"),
self.version, configurator=self)
class GentooParser(parser.ApacheParser):
"""Gentoo specific ApacheParser override class"""
def __init__(self, *args, **kwargs):
# Gentoo specific configuration file for Apache2
self.apacheconfig_filep = "/etc/conf.d/apache2"
super(GentooParser, self).__init__(*args, **kwargs)
def update_runtime_variables(self):
""" Override for update_runtime_variables for custom parsing """
self.parse_sysconfig_var()
self.update_modules()
def parse_sysconfig_var(self):
""" Parses Apache CLI options from Gentoo configuration file """
defines = apache_util.parse_define_file(self.apacheconfig_filep,
"APACHE2_OPTS")
for k in defines:
self.variables[k] = defines[k]
def update_modules(self):
"""Get loaded modules from httpd process, and add them to DOM"""
mod_cmd = [self.configurator.option("ctl"), "modules"]
matches = self.parse_from_subprocess(mod_cmd, r"(.*)_module")
for mod in matches:
self.add_mod(mod.strip())
certbot-apache-0.39.0/certbot_apache/apache_util.py 0000644 0001750 0001750 00000006176 13544726630 022473 0 ustar erica erica 0000000 0000000 """ Utility functions for certbot-apache plugin """
import binascii
from certbot import util
from certbot.compat import os
def get_mod_deps(mod_name):
"""Get known module dependencies.
.. note:: This does not need to be accurate in order for the client to
run. This simply keeps things clean if the user decides to revert
changes.
.. warning:: If all deps are not included, it may cause incorrect parsing
behavior, due to enable_mod's shortcut for updating the parser's
currently defined modules (`.ApacheParser.add_mod`)
This would only present a major problem in extremely atypical
configs that use ifmod for the missing deps.
"""
deps = {
"ssl": ["setenvif", "mime"]
}
return deps.get(mod_name, [])
def get_file_path(vhost_path):
"""Get file path from augeas_vhost_path.
Takes in Augeas path and returns the file name
:param str vhost_path: Augeas virtual host path
:returns: filename of vhost
:rtype: str
"""
if not vhost_path or not vhost_path.startswith("/files/"):
return None
return _split_aug_path(vhost_path)[0]
def get_internal_aug_path(vhost_path):
"""Get the Augeas path for a vhost with the file path removed.
:param str vhost_path: Augeas virtual host path
:returns: Augeas path to vhost relative to the containing file
:rtype: str
"""
return _split_aug_path(vhost_path)[1]
def _split_aug_path(vhost_path):
"""Splits an Augeas path into a file path and an internal path.
After removing "/files", this function splits vhost_path into the
file path and the remaining Augeas path.
:param str vhost_path: Augeas virtual host path
:returns: file path and internal Augeas path
:rtype: `tuple` of `str`
"""
# Strip off /files
file_path = vhost_path[6:]
internal_path = []
# Remove components from the end of file_path until it becomes valid
while not os.path.exists(file_path):
file_path, _, internal_path_part = file_path.rpartition("/")
internal_path.append(internal_path_part)
return file_path, "/".join(reversed(internal_path))
def parse_define_file(filepath, varname):
""" Parses Defines from a variable in configuration file
:param str filepath: Path of file to parse
:param str varname: Name of the variable
:returns: Dict of Define:Value pairs
:rtype: `dict`
"""
return_vars = {}
# Get list of words in the variable
a_opts = util.get_var_from_file(varname, filepath).split()
for i, v in enumerate(a_opts):
# Handle Define statements and make sure it has an argument
if v == "-D" and len(a_opts) >= i+2:
var_parts = a_opts[i+1].partition("=")
return_vars[var_parts[0]] = var_parts[2]
elif len(v) > 2 and v.startswith("-D"):
# Found var with no whitespace separator
var_parts = v[2:].partition("=")
return_vars[var_parts[0]] = var_parts[2]
return return_vars
def unique_id():
""" Returns an unique id to be used as a VirtualHost identifier"""
return binascii.hexlify(os.urandom(16)).decode("utf-8")
certbot-apache-0.39.0/certbot_apache/constants.py 0000644 0001750 0001750 00000005572 13544726630 022230 0 ustar erica erica 0000000 0000000 """Apache plugin constants."""
import pkg_resources
MOD_SSL_CONF_DEST = "options-ssl-apache.conf"
"""Name of the mod_ssl config file as saved in `IConfig.config_dir`."""
UPDATED_MOD_SSL_CONF_DIGEST = ".updated-options-ssl-apache-conf-digest.txt"
"""Name of the hash of the updated or informed mod_ssl_conf as saved in `IConfig.config_dir`."""
# NEVER REMOVE A SINGLE HASH FROM THIS LIST UNLESS YOU KNOW EXACTLY WHAT YOU ARE DOING!
ALL_SSL_OPTIONS_HASHES = [
'2086bca02db48daf93468332543c60ac6acdb6f0b58c7bfdf578a5d47092f82a',
'4844d36c9a0f587172d9fa10f4f1c9518e3bcfa1947379f155e16a70a728c21a',
'5a922826719981c0a234b1fbcd495f3213e49d2519e845ea0748ba513044b65b',
'4066b90268c03c9ba0201068eaa39abbc02acf9558bb45a788b630eb85dadf27',
'f175e2e7c673bd88d0aff8220735f385f916142c44aa83b09f1df88dd4767a88',
'cfdd7c18d2025836ea3307399f509cfb1ebf2612c87dd600a65da2a8e2f2797b',
'80720bd171ccdc2e6b917ded340defae66919e4624962396b992b7218a561791',
'c0c022ea6b8a51ecc8f1003d0a04af6c3f2bc1c3ce506b3c2dfc1f11ef931082',
'717b0a89f5e4c39b09a42813ac6e747cfbdeb93439499e73f4f70a1fe1473f20',
'0fcdc81280cd179a07ec4d29d3595068b9326b455c488de4b09f585d5dafc137',
'86cc09ad5415cd6d5f09a947fe2501a9344328b1e8a8b458107ea903e80baa6c',
'06675349e457eae856120cdebb564efe546f0b87399f2264baeb41e442c724c7',
]
"""SHA256 hashes of the contents of previous versions of all versions of MOD_SSL_CONF_SRC"""
AUGEAS_LENS_DIR = pkg_resources.resource_filename(
"certbot_apache", "augeas_lens")
"""Path to the Augeas lens directory"""
REWRITE_HTTPS_ARGS = [
"^", "https://%{SERVER_NAME}%{REQUEST_URI}", "[L,NE,R=permanent]"]
"""Apache version<2.3.9 rewrite rule arguments used for redirections to
https vhost"""
REWRITE_HTTPS_ARGS_WITH_END = [
"^", "https://%{SERVER_NAME}%{REQUEST_URI}", "[END,NE,R=permanent]"]
"""Apache version >= 2.3.9 rewrite rule arguments used for redirections to
https vhost"""
OLD_REWRITE_HTTPS_ARGS = [
["^", "https://%{SERVER_NAME}%{REQUEST_URI}", "[L,QSA,R=permanent]"],
["^", "https://%{SERVER_NAME}%{REQUEST_URI}", "[END,QSA,R=permanent]"]]
HSTS_ARGS = ["always", "set", "Strict-Transport-Security",
"\"max-age=31536000\""]
"""Apache header arguments for HSTS"""
UIR_ARGS = ["always", "set", "Content-Security-Policy",
"upgrade-insecure-requests"]
HEADER_ARGS = {"Strict-Transport-Security": HSTS_ARGS,
"Upgrade-Insecure-Requests": UIR_ARGS}
AUTOHSTS_STEPS = [60, 300, 900, 3600, 21600, 43200, 86400]
"""AutoHSTS increase steps: 1min, 5min, 15min, 1h, 6h, 12h, 24h"""
AUTOHSTS_PERMANENT = 31536000
"""Value for the last max-age of HSTS"""
AUTOHSTS_FREQ = 172800
"""Minimum time since last increase to perform a new one: 48h"""
MANAGED_COMMENT = "DO NOT REMOVE - Managed by Certbot"
MANAGED_COMMENT_ID = MANAGED_COMMENT+", VirtualHost id: {0}"
"""Managed by Certbot comments and the VirtualHost identification template"""
certbot-apache-0.39.0/docs/ 0002755 0001750 0001750 00000000000 13544726642 015623 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/docs/api.rst 0000644 0001750 0001750 00000000131 13544726630 017114 0 ustar erica erica 0000000 0000000 =================
API Documentation
=================
.. toctree::
:glob:
api/**
certbot-apache-0.39.0/docs/_templates/ 0002755 0001750 0001750 00000000000 13544726642 017760 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/docs/_templates/.gitignore 0000644 0001750 0001750 00000000000 13544726630 021731 0 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/docs/.gitignore 0000644 0001750 0001750 00000000011 13544726630 017576 0 ustar erica erica 0000000 0000000 /_build/
certbot-apache-0.39.0/docs/Makefile 0000644 0001750 0001750 00000016421 13544726630 017262 0 ustar erica erica 0000000 0000000 # Makefile for Sphinx documentation
#
# You can set these variables from the command line.
SPHINXOPTS =
SPHINXBUILD = sphinx-build
PAPER =
BUILDDIR = _build
# User-friendly check for sphinx-build
ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
endif
# Internal variables.
PAPEROPT_a4 = -D latex_paper_size=a4
PAPEROPT_letter = -D latex_paper_size=letter
ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
# the i18n builder cannot share the environment and doctrees with the others
I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest coverage gettext
help:
@echo "Please use \`make ' where is one of"
@echo " html to make standalone HTML files"
@echo " dirhtml to make HTML files named index.html in directories"
@echo " singlehtml to make a single large HTML file"
@echo " pickle to make pickle files"
@echo " json to make JSON files"
@echo " htmlhelp to make HTML files and a HTML help project"
@echo " qthelp to make HTML files and a qthelp project"
@echo " applehelp to make an Apple Help Book"
@echo " devhelp to make HTML files and a Devhelp project"
@echo " epub to make an epub"
@echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
@echo " latexpdf to make LaTeX files and run them through pdflatex"
@echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
@echo " text to make text files"
@echo " man to make manual pages"
@echo " texinfo to make Texinfo files"
@echo " info to make Texinfo files and run them through makeinfo"
@echo " gettext to make PO message catalogs"
@echo " changes to make an overview of all changed/added/deprecated items"
@echo " xml to make Docutils-native XML files"
@echo " pseudoxml to make pseudoxml-XML files for display purposes"
@echo " linkcheck to check all external links for integrity"
@echo " doctest to run all doctests embedded in the documentation (if enabled)"
@echo " coverage to run coverage check of the documentation (if enabled)"
clean:
rm -rf $(BUILDDIR)/*
html:
$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
@echo
@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
dirhtml:
$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
@echo
@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
singlehtml:
$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
@echo
@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
pickle:
$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
@echo
@echo "Build finished; now you can process the pickle files."
json:
$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
@echo
@echo "Build finished; now you can process the JSON files."
htmlhelp:
$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
@echo
@echo "Build finished; now you can run HTML Help Workshop with the" \
".hhp project file in $(BUILDDIR)/htmlhelp."
qthelp:
$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
@echo
@echo "Build finished; now you can run "qcollectiongenerator" with the" \
".qhcp project file in $(BUILDDIR)/qthelp, like this:"
@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/certbot-apache.qhcp"
@echo "To view the help file:"
@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/certbot-apache.qhc"
applehelp:
$(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp
@echo
@echo "Build finished. The help book is in $(BUILDDIR)/applehelp."
@echo "N.B. You won't be able to view it unless you put it in" \
"~/Library/Documentation/Help or install it in your application" \
"bundle."
devhelp:
$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
@echo
@echo "Build finished."
@echo "To view the help file:"
@echo "# mkdir -p $$HOME/.local/share/devhelp/certbot-apache"
@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/certbot-apache"
@echo "# devhelp"
epub:
$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
@echo
@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
latex:
$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
@echo
@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
@echo "Run \`make' in that directory to run these through (pdf)latex" \
"(use \`make latexpdf' here to do that automatically)."
latexpdf:
$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
@echo "Running LaTeX files through pdflatex..."
$(MAKE) -C $(BUILDDIR)/latex all-pdf
@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
latexpdfja:
$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
@echo "Running LaTeX files through platex and dvipdfmx..."
$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
text:
$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
@echo
@echo "Build finished. The text files are in $(BUILDDIR)/text."
man:
$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
@echo
@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
texinfo:
$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
@echo
@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
@echo "Run \`make' in that directory to run these through makeinfo" \
"(use \`make info' here to do that automatically)."
info:
$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
@echo "Running Texinfo files through makeinfo..."
make -C $(BUILDDIR)/texinfo info
@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
gettext:
$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
@echo
@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
changes:
$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
@echo
@echo "The overview file is in $(BUILDDIR)/changes."
linkcheck:
$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
@echo
@echo "Link check complete; look for any errors in the above output " \
"or in $(BUILDDIR)/linkcheck/output.txt."
doctest:
$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
@echo "Testing of doctests in the sources finished, look at the " \
"results in $(BUILDDIR)/doctest/output.txt."
coverage:
$(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage
@echo "Testing of coverage in the sources finished, look at the " \
"results in $(BUILDDIR)/coverage/python.txt."
xml:
$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
@echo
@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
pseudoxml:
$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
@echo
@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
certbot-apache-0.39.0/docs/api/ 0002755 0001750 0001750 00000000000 13544726642 016374 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/docs/api/obj.rst 0000644 0001750 0001750 00000000151 13544726630 017670 0 ustar erica erica 0000000 0000000 :mod:`certbot_apache.obj`
-----------------------------
.. automodule:: certbot_apache.obj
:members:
certbot-apache-0.39.0/docs/api/parser.rst 0000644 0001750 0001750 00000000162 13544726630 020414 0 ustar erica erica 0000000 0000000 :mod:`certbot_apache.parser`
--------------------------------
.. automodule:: certbot_apache.parser
:members:
certbot-apache-0.39.0/docs/api/configurator.rst 0000644 0001750 0001750 00000000204 13544726630 021617 0 ustar erica erica 0000000 0000000 :mod:`certbot_apache.configurator`
--------------------------------------
.. automodule:: certbot_apache.configurator
:members:
certbot-apache-0.39.0/docs/api/display_ops.rst 0000644 0001750 0001750 00000000201 13544726630 021440 0 ustar erica erica 0000000 0000000 :mod:`certbot_apache.display_ops`
-------------------------------------
.. automodule:: certbot_apache.display_ops
:members:
certbot-apache-0.39.0/docs/api/tls_sni_01.rst 0000644 0001750 0001750 00000000176 13544726630 021100 0 ustar erica erica 0000000 0000000 :mod:`certbot_apache.tls_sni_01`
------------------------------------
.. automodule:: certbot_apache.tls_sni_01
:members:
certbot-apache-0.39.0/docs/api/augeas_configurator.rst 0000644 0001750 0001750 00000000231 13544726630 023144 0 ustar erica erica 0000000 0000000 :mod:`certbot_apache.augeas_configurator`
---------------------------------------------
.. automodule:: certbot_apache.augeas_configurator
:members:
certbot-apache-0.39.0/docs/_static/ 0002755 0001750 0001750 00000000000 13544726642 017251 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/docs/_static/.gitignore 0000644 0001750 0001750 00000000000 13544726630 021222 0 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/docs/index.rst 0000644 0001750 0001750 00000001027 13544726630 017457 0 ustar erica erica 0000000 0000000 .. certbot-apache documentation master file, created by
sphinx-quickstart on Sun Oct 18 13:39:26 2015.
You can adapt this file completely to your liking, but it should at least
contain the root `toctree` directive.
Welcome to certbot-apache's documentation!
==============================================
Contents:
.. toctree::
:maxdepth: 2
.. toctree::
:maxdepth: 1
api
.. automodule:: certbot_apache
:members:
Indices and tables
==================
* :ref:`genindex`
* :ref:`modindex`
* :ref:`search`
certbot-apache-0.39.0/docs/conf.py 0000644 0001750 0001750 00000024402 13544726630 017117 0 ustar erica erica 0000000 0000000 # -*- coding: utf-8 -*-
#
# certbot-apache documentation build configuration file, created by
# sphinx-quickstart on Sun Oct 18 13:39:26 2015.
#
# This file is execfile()d with the current directory set to its
# containing dir.
#
# Note that not all possible configuration values are present in this
# autogenerated file.
#
# All configuration values have a default; values that are commented out
# serve to show the default.
import sys
from certbot.compat import os
import shlex
import mock
# http://docs.readthedocs.org/en/latest/faq.html#i-get-import-errors-on-libraries-that-depend-on-c-modules
# c.f. #262
sys.modules.update(
(mod_name, mock.MagicMock()) for mod_name in ['augeas'])
here = os.path.abspath(os.path.dirname(__file__))
# If extensions (or modules to document with autodoc) are in another directory,
# add these directories to sys.path here. If the directory is relative to the
# documentation root, use os.path.abspath to make it absolute, like shown here.
sys.path.insert(0, os.path.abspath(os.path.join(here, '..')))
# -- General configuration ------------------------------------------------
# If your documentation needs a minimal Sphinx version, state it here.
needs_sphinx = '1.0'
# Add any Sphinx extension module names here, as strings. They can be
# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
# ones.
extensions = [
'sphinx.ext.autodoc',
'sphinx.ext.intersphinx',
'sphinx.ext.todo',
'sphinx.ext.coverage',
'sphinx.ext.viewcode',
]
autodoc_member_order = 'bysource'
autodoc_default_flags = ['show-inheritance', 'private-members']
# Add any paths that contain templates here, relative to this directory.
templates_path = ['_templates']
# The suffix(es) of source filenames.
# You can specify multiple suffix as a list of string:
# source_suffix = ['.rst', '.md']
source_suffix = '.rst'
# The encoding of source files.
#source_encoding = 'utf-8-sig'
# The master toctree document.
master_doc = 'index'
# General information about the project.
project = u'certbot-apache'
copyright = u'2014-2015, Let\'s Encrypt Project'
author = u'Certbot Project'
# The version info for the project you're documenting, acts as replacement for
# |version| and |release|, also used in various other places throughout the
# built documents.
#
# The short X.Y version.
version = '0'
# The full version, including alpha/beta/rc tags.
release = '0'
# The language for content autogenerated by Sphinx. Refer to documentation
# for a list of supported languages.
#
# This is also used if you do content translation via gettext catalogs.
# Usually you set "language" from the command line for these cases.
language = 'en'
# There are two options for replacing |today|: either, you set today to some
# non-false value, then it is used:
#today = ''
# Else, today_fmt is used as the format for a strftime call.
#today_fmt = '%B %d, %Y'
# List of patterns, relative to source directory, that match files and
# directories to ignore when looking for source files.
exclude_patterns = ['_build']
# The reST default role (used for this markup: `text`) to use for all
# documents.
default_role = 'py:obj'
# If true, '()' will be appended to :func: etc. cross-reference text.
#add_function_parentheses = True
# If true, the current module name will be prepended to all description
# unit titles (such as .. function::).
#add_module_names = True
# If true, sectionauthor and moduleauthor directives will be shown in the
# output. They are ignored by default.
#show_authors = False
# The name of the Pygments (syntax highlighting) style to use.
pygments_style = 'sphinx'
# A list of ignored prefixes for module index sorting.
#modindex_common_prefix = []
# If true, keep warnings as "system message" paragraphs in the built documents.
#keep_warnings = False
# If true, `todo` and `todoList` produce output, else they produce nothing.
todo_include_todos = True
# -- Options for HTML output ----------------------------------------------
# The theme to use for HTML and HTML Help pages. See the documentation for
# a list of builtin themes.
# http://docs.readthedocs.org/en/latest/theme.html#how-do-i-use-this-locally-and-on-read-the-docs
# on_rtd is whether we are on readthedocs.org
on_rtd = os.environ.get('READTHEDOCS', None) == 'True'
if not on_rtd: # only import and set the theme if we're building docs locally
import sphinx_rtd_theme
html_theme = 'sphinx_rtd_theme'
html_theme_path = [sphinx_rtd_theme.get_html_theme_path()]
# otherwise, readthedocs.org uses their theme by default, so no need to specify it
# Theme options are theme-specific and customize the look and feel of a theme
# further. For a list of options available for each theme, see the
# documentation.
#html_theme_options = {}
# Add any paths that contain custom themes here, relative to this directory.
#html_theme_path = []
# The name for this set of Sphinx documents. If None, it defaults to
# " v documentation".
#html_title = None
# A shorter title for the navigation bar. Default is the same as html_title.
#html_short_title = None
# The name of an image file (relative to this directory) to place at the top
# of the sidebar.
#html_logo = None
# The name of an image file (within the static path) to use as favicon of the
# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32
# pixels large.
#html_favicon = None
# Add any paths that contain custom static files (such as style sheets) here,
# relative to this directory. They are copied after the builtin static files,
# so a file named "default.css" will overwrite the builtin "default.css".
html_static_path = ['_static']
# Add any extra paths that contain custom files (such as robots.txt or
# .htaccess) here, relative to this directory. These files are copied
# directly to the root of the documentation.
#html_extra_path = []
# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
# using the given strftime format.
#html_last_updated_fmt = '%b %d, %Y'
# If true, SmartyPants will be used to convert quotes and dashes to
# typographically correct entities.
#html_use_smartypants = True
# Custom sidebar templates, maps document names to template names.
#html_sidebars = {}
# Additional templates that should be rendered to pages, maps page names to
# template names.
#html_additional_pages = {}
# If false, no module index is generated.
#html_domain_indices = True
# If false, no index is generated.
#html_use_index = True
# If true, the index is split into individual pages for each letter.
#html_split_index = False
# If true, links to the reST sources are added to the pages.
#html_show_sourcelink = True
# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
#html_show_sphinx = True
# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
#html_show_copyright = True
# If true, an OpenSearch description file will be output, and all pages will
# contain a tag referring to it. The value of this option must be the
# base URL from which the finished HTML is served.
#html_use_opensearch = ''
# This is the file name suffix for HTML files (e.g. ".xhtml").
#html_file_suffix = None
# Language to be used for generating the HTML full-text search index.
# Sphinx supports the following languages:
# 'da', 'de', 'en', 'es', 'fi', 'fr', 'hu', 'it', 'ja'
# 'nl', 'no', 'pt', 'ro', 'ru', 'sv', 'tr'
#html_search_language = 'en'
# A dictionary with options for the search language support, empty by default.
# Now only 'ja' uses this config value
#html_search_options = {'type': 'default'}
# The name of a javascript file (relative to the configuration directory) that
# implements a search results scorer. If empty, the default will be used.
#html_search_scorer = 'scorer.js'
# Output file base name for HTML help builder.
htmlhelp_basename = 'certbot-apachedoc'
# -- Options for LaTeX output ---------------------------------------------
latex_elements = {
# The paper size ('letterpaper' or 'a4paper').
#'papersize': 'letterpaper',
# The font size ('10pt', '11pt' or '12pt').
#'pointsize': '10pt',
# Additional stuff for the LaTeX preamble.
#'preamble': '',
# Latex figure (float) alignment
#'figure_align': 'htbp',
}
# Grouping the document tree into LaTeX files. List of tuples
# (source start file, target name, title,
# author, documentclass [howto, manual, or own class]).
latex_documents = [
(master_doc, 'certbot-apache.tex', u'certbot-apache Documentation',
u'Certbot Project', 'manual'),
]
# The name of an image file (relative to this directory) to place at the top of
# the title page.
#latex_logo = None
# For "manual" documents, if this is true, then toplevel headings are parts,
# not chapters.
#latex_use_parts = False
# If true, show page references after internal links.
#latex_show_pagerefs = False
# If true, show URL addresses after external links.
#latex_show_urls = False
# Documents to append as an appendix to all manuals.
#latex_appendices = []
# If false, no module index is generated.
#latex_domain_indices = True
# -- Options for manual page output ---------------------------------------
# One entry per manual page. List of tuples
# (source start file, name, description, authors, manual section).
man_pages = [
(master_doc, 'certbot-apache', u'certbot-apache Documentation',
[author], 1)
]
# If true, show URL addresses after external links.
#man_show_urls = False
# -- Options for Texinfo output -------------------------------------------
# Grouping the document tree into Texinfo files. List of tuples
# (source start file, target name, title, author,
# dir menu entry, description, category)
texinfo_documents = [
(master_doc, 'certbot-apache', u'certbot-apache Documentation',
author, 'certbot-apache', 'One line description of project.',
'Miscellaneous'),
]
# Documents to append as an appendix to all manuals.
#texinfo_appendices = []
# If false, no module index is generated.
#texinfo_domain_indices = True
# How to display URL addresses: 'footnote', 'no', or 'inline'.
#texinfo_show_urls = 'footnote'
# If true, do not generate a @detailmenu in the "Top" node's menu.
#texinfo_no_detailmenu = False
intersphinx_mapping = {
'python': ('https://docs.python.org/', None),
'acme': ('https://acme-python.readthedocs.org/en/latest/', None),
'certbot': ('https://certbot.eff.org/docs/', None),
}
certbot-apache-0.39.0/docs/make.bat 0000644 0001750 0001750 00000016134 13544726630 017230 0 ustar erica erica 0000000 0000000 @ECHO OFF
REM Command file for Sphinx documentation
if "%SPHINXBUILD%" == "" (
set SPHINXBUILD=sphinx-build
)
set BUILDDIR=_build
set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% .
set I18NSPHINXOPTS=%SPHINXOPTS% .
if NOT "%PAPER%" == "" (
set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%
set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS%
)
if "%1" == "" goto help
if "%1" == "help" (
:help
echo.Please use `make ^` where ^ is one of
echo. html to make standalone HTML files
echo. dirhtml to make HTML files named index.html in directories
echo. singlehtml to make a single large HTML file
echo. pickle to make pickle files
echo. json to make JSON files
echo. htmlhelp to make HTML files and a HTML help project
echo. qthelp to make HTML files and a qthelp project
echo. devhelp to make HTML files and a Devhelp project
echo. epub to make an epub
echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter
echo. text to make text files
echo. man to make manual pages
echo. texinfo to make Texinfo files
echo. gettext to make PO message catalogs
echo. changes to make an overview over all changed/added/deprecated items
echo. xml to make Docutils-native XML files
echo. pseudoxml to make pseudoxml-XML files for display purposes
echo. linkcheck to check all external links for integrity
echo. doctest to run all doctests embedded in the documentation if enabled
echo. coverage to run coverage check of the documentation if enabled
goto end
)
if "%1" == "clean" (
for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i
del /q /s %BUILDDIR%\*
goto end
)
REM Check if sphinx-build is available and fallback to Python version if any
%SPHINXBUILD% 2> nul
if errorlevel 9009 goto sphinx_python
goto sphinx_ok
:sphinx_python
set SPHINXBUILD=python -m sphinx.__init__
%SPHINXBUILD% 2> nul
if errorlevel 9009 (
echo.
echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
echo.installed, then set the SPHINXBUILD environment variable to point
echo.to the full path of the 'sphinx-build' executable. Alternatively you
echo.may add the Sphinx directory to PATH.
echo.
echo.If you don't have Sphinx installed, grab it from
echo.http://sphinx-doc.org/
exit /b 1
)
:sphinx_ok
if "%1" == "html" (
%SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/html.
goto end
)
if "%1" == "dirhtml" (
%SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.
goto end
)
if "%1" == "singlehtml" (
%SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.
goto end
)
if "%1" == "pickle" (
%SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can process the pickle files.
goto end
)
if "%1" == "json" (
%SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can process the JSON files.
goto end
)
if "%1" == "htmlhelp" (
%SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can run HTML Help Workshop with the ^
.hhp project file in %BUILDDIR%/htmlhelp.
goto end
)
if "%1" == "qthelp" (
%SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can run "qcollectiongenerator" with the ^
.qhcp project file in %BUILDDIR%/qthelp, like this:
echo.^> qcollectiongenerator %BUILDDIR%\qthelp\certbot-apache.qhcp
echo.To view the help file:
echo.^> assistant -collectionFile %BUILDDIR%\qthelp\certbot-apache.ghc
goto end
)
if "%1" == "devhelp" (
%SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp
if errorlevel 1 exit /b 1
echo.
echo.Build finished.
goto end
)
if "%1" == "epub" (
%SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The epub file is in %BUILDDIR%/epub.
goto end
)
if "%1" == "latex" (
%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
if errorlevel 1 exit /b 1
echo.
echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.
goto end
)
if "%1" == "latexpdf" (
%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
cd %BUILDDIR%/latex
make all-pdf
cd %~dp0
echo.
echo.Build finished; the PDF files are in %BUILDDIR%/latex.
goto end
)
if "%1" == "latexpdfja" (
%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
cd %BUILDDIR%/latex
make all-pdf-ja
cd %~dp0
echo.
echo.Build finished; the PDF files are in %BUILDDIR%/latex.
goto end
)
if "%1" == "text" (
%SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The text files are in %BUILDDIR%/text.
goto end
)
if "%1" == "man" (
%SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The manual pages are in %BUILDDIR%/man.
goto end
)
if "%1" == "texinfo" (
%SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo.
goto end
)
if "%1" == "gettext" (
%SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The message catalogs are in %BUILDDIR%/locale.
goto end
)
if "%1" == "changes" (
%SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes
if errorlevel 1 exit /b 1
echo.
echo.The overview file is in %BUILDDIR%/changes.
goto end
)
if "%1" == "linkcheck" (
%SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck
if errorlevel 1 exit /b 1
echo.
echo.Link check complete; look for any errors in the above output ^
or in %BUILDDIR%/linkcheck/output.txt.
goto end
)
if "%1" == "doctest" (
%SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest
if errorlevel 1 exit /b 1
echo.
echo.Testing of doctests in the sources finished, look at the ^
results in %BUILDDIR%/doctest/output.txt.
goto end
)
if "%1" == "coverage" (
%SPHINXBUILD% -b coverage %ALLSPHINXOPTS% %BUILDDIR%/coverage
if errorlevel 1 exit /b 1
echo.
echo.Testing of coverage in the sources finished, look at the ^
results in %BUILDDIR%/coverage/python.txt.
goto end
)
if "%1" == "xml" (
%SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The XML files are in %BUILDDIR%/xml.
goto end
)
if "%1" == "pseudoxml" (
%SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml.
goto end
)
:end
certbot-apache-0.39.0/certbot_apache.egg-info/ 0002755 0001750 0001750 00000000000 13544726642 021330 5 ustar erica erica 0000000 0000000 certbot-apache-0.39.0/certbot_apache.egg-info/top_level.txt 0000644 0001750 0001750 00000000017 13544726642 024056 0 ustar erica erica 0000000 0000000 certbot_apache
certbot-apache-0.39.0/certbot_apache.egg-info/PKG-INFO 0000644 0001750 0001750 00000002430 13544726642 022422 0 ustar erica erica 0000000 0000000 Metadata-Version: 2.1
Name: certbot-apache
Version: 0.39.0
Summary: Apache plugin for Certbot
Home-page: https://github.com/letsencrypt/letsencrypt
Author: Certbot Project
Author-email: client-dev@letsencrypt.org
License: Apache License 2.0
Description: UNKNOWN
Platform: UNKNOWN
Classifier: Development Status :: 5 - Production/Stable
Classifier: Environment :: Plugins
Classifier: Intended Audience :: System Administrators
Classifier: License :: OSI Approved :: Apache Software License
Classifier: Operating System :: POSIX :: Linux
Classifier: Programming Language :: Python
Classifier: Programming Language :: Python :: 2
Classifier: Programming Language :: Python :: 2.7
Classifier: Programming Language :: Python :: 3
Classifier: Programming Language :: Python :: 3.4
Classifier: Programming Language :: Python :: 3.5
Classifier: Programming Language :: Python :: 3.6
Classifier: Programming Language :: Python :: 3.7
Classifier: Programming Language :: Python :: 3.8
Classifier: Topic :: Internet :: WWW/HTTP
Classifier: Topic :: Security
Classifier: Topic :: System :: Installation/Setup
Classifier: Topic :: System :: Networking
Classifier: Topic :: System :: Systems Administration
Classifier: Topic :: Utilities
Requires-Python: >=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*
Provides-Extra: docs
certbot-apache-0.39.0/certbot_apache.egg-info/requires.txt 0000644 0001750 0001750 00000000176 13544726642 023732 0 ustar erica erica 0000000 0000000 acme>=0.29.0
certbot>=0.39.0
mock
python-augeas
setuptools
zope.component
zope.interface
[docs]
Sphinx>=1.0
sphinx_rtd_theme
certbot-apache-0.39.0/certbot_apache.egg-info/dependency_links.txt 0000644 0001750 0001750 00000000001 13544726642 025374 0 ustar erica erica 0000000 0000000
certbot-apache-0.39.0/certbot_apache.egg-info/entry_points.txt 0000644 0001750 0001750 00000000101 13544726642 024614 0 ustar erica erica 0000000 0000000 [certbot.plugins]
apache = certbot_apache.entrypoint:ENTRYPOINT
certbot-apache-0.39.0/certbot_apache.egg-info/SOURCES.txt 0000644 0001750 0001750 00000035141 13544726642 023216 0 ustar erica erica 0000000 0000000 LICENSE.txt
MANIFEST.in
README.rst
setup.cfg
setup.py
certbot_apache/__init__.py
certbot_apache/apache_util.py
certbot_apache/centos-options-ssl-apache.conf
certbot_apache/configurator.py
certbot_apache/constants.py
certbot_apache/display_ops.py
certbot_apache/entrypoint.py
certbot_apache/http_01.py
certbot_apache/obj.py
certbot_apache/options-ssl-apache.conf
certbot_apache/override_arch.py
certbot_apache/override_centos.py
certbot_apache/override_darwin.py
certbot_apache/override_debian.py
certbot_apache/override_fedora.py
certbot_apache/override_gentoo.py
certbot_apache/override_suse.py
certbot_apache/parser.py
certbot_apache.egg-info/PKG-INFO
certbot_apache.egg-info/SOURCES.txt
certbot_apache.egg-info/dependency_links.txt
certbot_apache.egg-info/entry_points.txt
certbot_apache.egg-info/requires.txt
certbot_apache.egg-info/top_level.txt
certbot_apache/augeas_lens/httpd.aug
certbot_apache/tests/__init__.py
certbot_apache/tests/autohsts_test.py
certbot_apache/tests/centos6_test.py
certbot_apache/tests/centos_test.py
certbot_apache/tests/complex_parsing_test.py
certbot_apache/tests/configurator_reverter_test.py
certbot_apache/tests/configurator_test.py
certbot_apache/tests/debian_test.py
certbot_apache/tests/display_ops_test.py
certbot_apache/tests/entrypoint_test.py
certbot_apache/tests/fedora_test.py
certbot_apache/tests/gentoo_test.py
certbot_apache/tests/http_01_test.py
certbot_apache/tests/obj_test.py
certbot_apache/tests/parser_test.py
certbot_apache/tests/util.py
certbot_apache/tests/testdata/centos6_apache/apache/httpd/conf/httpd.conf
certbot_apache/tests/testdata/centos6_apache/apache/httpd/conf.d/README
certbot_apache/tests/testdata/centos6_apache/apache/httpd/conf.d/ssl.conf
certbot_apache/tests/testdata/centos6_apache/apache/httpd/conf.d/test.example.com.conf
certbot_apache/tests/testdata/centos6_apache/apache/httpd/conf.d/welcome.conf
certbot_apache/tests/testdata/centos7_apache/apache/sites
certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf/httpd.conf
certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf/magic
certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.d/README
certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.d/autoindex.conf
certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.d/centos.example.com.conf
certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.d/ssl.conf
certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.d/userdir.conf
certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.d/welcome.conf
certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-base.conf
certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-dav.conf
certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-lua.conf
certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-mpm.conf
certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-proxy.conf
certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-ssl.conf
certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/00-systemd.conf
certbot_apache/tests/testdata/centos7_apache/apache/httpd/conf.modules.d/01-cgi.conf
certbot_apache/tests/testdata/centos7_apache/apache/sysconfig/httpd
certbot_apache/tests/testdata/complex_parsing/apache2.conf
certbot_apache/tests/testdata/complex_parsing/test_fnmatch.conf
certbot_apache/tests/testdata/complex_parsing/test_variables.conf
certbot_apache/tests/testdata/complex_parsing/conf-enabled/dummy.conf
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/sites
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/apache2.conf
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/envvars
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/ports.conf
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-available/bad_conf_file.conf
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-available/other-vhosts-access-log.conf
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-available/security.conf
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-available/serve-cgi-bin.conf
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-enabled/other-vhosts-access-log.conf
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-enabled/security.conf
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/conf-enabled/serve-cgi-bin.conf
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-available/authz_svn.load
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-available/dav.load
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-available/dav_svn.conf
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-available/dav_svn.load
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-available/rewrite.load
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-available/ssl.conf
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-available/ssl.load
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-enabled/authz_svn.load
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-enabled/dav.load
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-enabled/dav_svn.conf
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/mods-enabled/dav_svn.load
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-available/another_wildcard.conf
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-available/old-and-default.conf
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-available/wildcard.conf
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-enabled/another_wildcard.conf
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-enabled/old-and-default.conf
certbot_apache/tests/testdata/debian_apache_2_4/augeas_vhosts/apache2/sites-enabled/wildcard.conf
certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/sites
certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/apache2.conf
certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/envvars
certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/ports.conf
certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-available/other-vhosts-access-log.conf
certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-available/security.conf
certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-available/serve-cgi-bin.conf
certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-enabled/other-vhosts-access-log.conf
certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-enabled/security.conf
certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/conf-enabled/serve-cgi-bin.conf
certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/mods-available/ssl.conf
certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/mods-available/ssl.load
certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/sites-available/000-default.conf
certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/sites-available/default-ssl.conf
certbot_apache/tests/testdata/debian_apache_2_4/default_vhost/apache2/sites-enabled/000-default.conf
certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/apache2.conf
certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/envvars
certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/ports.conf
certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/sites-available/default.conf
certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/sites-available/multi-vhost.conf
certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/sites-enabled/default.conf
certbot_apache/tests/testdata/debian_apache_2_4/multi_vhosts/apache2/sites-enabled/multi-vhost.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/sites
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/apache2.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/envvars
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/ports.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-available/bad_conf_file.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-available/other-vhosts-access-log.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-available/security.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-available/serve-cgi-bin.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-enabled/other-vhosts-access-log.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-enabled/security.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/conf-enabled/serve-cgi-bin.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-available/authz_svn.load
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-available/dav.load
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-available/dav_svn.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-available/dav_svn.load
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-available/rewrite.load
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-available/ssl.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-available/ssl.load
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-enabled/authz_svn.load
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-enabled/dav.load
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-enabled/dav_svn.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/mods-enabled/dav_svn.load
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/000-default.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/certbot.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/default-ssl-port-only.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/default-ssl.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/duplicatehttp.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/duplicatehttps.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/encryption-example.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/mod_macro-example.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/ocsp-ssl.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-available/wildcard.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/000-default.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/certbot.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/default-ssl-port-only.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/default-ssl.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/duplicatehttp.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/duplicatehttps.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/encryption-example.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/mod_macro-example.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/non-symlink.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/ocsp-ssl.conf
certbot_apache/tests/testdata/debian_apache_2_4/multiple_vhosts/apache2/sites-enabled/wildcard.conf
certbot_apache/tests/testdata/gentoo_apache/apache/sites
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/httpd.conf
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/magic
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_default_settings.conf
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_error_documents.conf
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_languages.conf
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mod_autoindex.conf
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mod_info.conf
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mod_log_config.conf
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mod_mime.conf
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mod_status.conf
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mod_userdir.conf
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/00_mpm.conf
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/10_mod_mem_cache.conf
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/40_mod_ssl.conf
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/41_mod_http2.conf
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/45_mod_dav.conf
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/modules.d/46_mod_ldap.conf
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/vhosts.d/00_default_ssl_vhost.conf
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/vhosts.d/00_default_vhost.conf
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/vhosts.d/default_vhost.include
certbot_apache/tests/testdata/gentoo_apache/apache/apache2/vhosts.d/gentoo.example.com.conf
certbot_apache/tests/testdata/gentoo_apache/apache/conf.d/apache2
docs/.gitignore
docs/Makefile
docs/api.rst
docs/conf.py
docs/index.rst
docs/make.bat
docs/_static/.gitignore
docs/_templates/.gitignore
docs/api/augeas_configurator.rst
docs/api/configurator.rst
docs/api/display_ops.rst
docs/api/obj.rst
docs/api/parser.rst
docs/api/tls_sni_01.rst certbot-apache-0.39.0/setup.py 0000644 0001750 0001750 00000005016 13544726631 016403 0 ustar erica erica 0000000 0000000 from setuptools import setup
from setuptools import find_packages
from setuptools.command.test import test as TestCommand
import sys
version = '0.39.0'
# Remember to update local-oldest-requirements.txt when changing the minimum
# acme/certbot version.
install_requires = [
'acme>=0.29.0',
'certbot>=0.39.0',
'mock',
'python-augeas',
'setuptools',
'zope.component',
'zope.interface',
]
docs_extras = [
'Sphinx>=1.0', # autodoc_member_order = 'bysource', autodoc_default_flags
'sphinx_rtd_theme',
]
class PyTest(TestCommand):
user_options = []
def initialize_options(self):
TestCommand.initialize_options(self)
self.pytest_args = ''
def run_tests(self):
import shlex
# import here, cause outside the eggs aren't loaded
import pytest
errno = pytest.main(shlex.split(self.pytest_args))
sys.exit(errno)
setup(
name='certbot-apache',
version=version,
description="Apache plugin for Certbot",
url='https://github.com/letsencrypt/letsencrypt',
author="Certbot Project",
author_email='client-dev@letsencrypt.org',
license='Apache License 2.0',
python_requires='>=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*',
classifiers=[
'Development Status :: 5 - Production/Stable',
'Environment :: Plugins',
'Intended Audience :: System Administrators',
'License :: OSI Approved :: Apache Software License',
'Operating System :: POSIX :: Linux',
'Programming Language :: Python',
'Programming Language :: Python :: 2',
'Programming Language :: Python :: 2.7',
'Programming Language :: Python :: 3',
'Programming Language :: Python :: 3.4',
'Programming Language :: Python :: 3.5',
'Programming Language :: Python :: 3.6',
'Programming Language :: Python :: 3.7',
'Programming Language :: Python :: 3.8',
'Topic :: Internet :: WWW/HTTP',
'Topic :: Security',
'Topic :: System :: Installation/Setup',
'Topic :: System :: Networking',
'Topic :: System :: Systems Administration',
'Topic :: Utilities',
],
packages=find_packages(),
include_package_data=True,
install_requires=install_requires,
extras_require={
'docs': docs_extras,
},
entry_points={
'certbot.plugins': [
'apache = certbot_apache.entrypoint:ENTRYPOINT',
],
},
test_suite='certbot_apache',
tests_require=["pytest"],
cmdclass={"test": PyTest},
)