Easy, repeatable testing of CLI programs/commands
[Install](#install)
| [Usage](#usage)
| [Options](#options)
| [Test formats](#test-formats)
| [Support/Contribute](#supportcontribute)
| [Credits](#credits)
**shelltestrunner** (executable: `shelltest`) is a portable
command-line tool for testing command-line programs, or general shell
commands, released under GPLv3+. It reads simple test specifications
defining a command to run, some input, and the expected output,
stderr, and exit status. It can run tests in parallel, selectively,
with a timeout, in color, etc.
Projects using it include
[hledger](http://hledger.org),
[Agda](http://wiki.portal.chalmers.se/agda),
and
[berp](https://github.com/bjpop/berp).
## Install
There may be a new-enough
[packaged version](https://repology.org/metapackage/shelltestrunner/badges)
on your platform. Eg:
|||
|----------------|---------------------------------------
| Debian/Ubuntu: | **`apt install shelltestrunner`**
| Gentoo: | **`emerge shelltestrunner`**
Or, build the latest release on any major platform:
|||
|----------------|---------------------------------------
| stack: | **[get stack](https://haskell-lang.org/get-started)**, **`stack install shelltestrunner-1.9.0.1`**
| cabal: | **`cabal update; cabal install shelltestrunner-1.9.0.1`**
## Usage
Here's a minimal test file containing one shell test:
# A comment. Testing bash's builtin "echo" command (if /bin/sh is bash)
echo
>>>= 0
They're called "shell test" because any shell (`/bin/sh` on POSIX, `CMD` on Windows)
command line can be tested.
Each test begins with the command to test, followed by optional stdin input,
expected stdout and/or stderr output, and ends with the expected exit status.
Here's another file containing two tests:
# Test that the "cat" program copies its input to stdout,
# nothing appears on stderr, and exit status is 0.
cat
<<<
foo
>>>
foo
>>>2
>>>= 0
# Test that cat prints an error containing "unrecognized option" or
# "illegal option" and exits with non-zero status if given a bad flag.
cat --no-such-flag
>>>2 /(unrecognized|illegal) option/
>>>= !0
To run these tests:
$ shelltest echo.test cat.test
:echo.test: [OK]
:cat.test:1: [OK]
:cat.test:2: [OK]
Test Cases Total
Passed 3 3
Failed 0 0
Total 3 3
That's the basics!
There are also some alternate test formats you'll read about below.
## Options
$ shelltest --help
shelltest 1.9.0.1
shelltest [OPTIONS] [TESTFILES|TESTDIRS]
Common flags:
-l --list List all parsed tests and stop
-a --all Don't truncate output, even if large
-c --color Show colored output if your terminal supports it
-d --diff Show expected output mismatches in diff format
-p --precise Show expected/actual output precisely (eg whitespace)
-h --hide-successes Show only test failures
--xmlout=FILE Specify file to store test results in xml format.
-D --defmacro=D=DEF Specify a macro that is evaluated by preprocessor
before the test files are parsed. D stands for macro
definition that is replaced with the value of DEF.
-i --include=PAT Include tests whose name contains this glob pattern
-x --exclude=STR Exclude test files whose path contains STR
--execdir Run tests from within the test file's directory
--extension=EXT File suffix of test files (default: .test)
-w --with=EXECUTABLE Replace the first word of (unindented) test commands
-o --timeout=SECS Number of seconds a test may run (default: no limit)
-j --threads=N Number of threads for running tests (default: 1)
--debug Show debug info, for troubleshooting
--debug-parse Show test file parsing info and stop
-? --help Display help message
-V --version Print version information
--numeric-version Print just the version number
`shelltest` accepts one or more test file or directory arguments.
A directory means all files below it named `*.test` (customisable with `--extension`).
Test commands are run with `/bin/sh` on POSIX systems and with `CMD` on Windows.
By default, they are run in the directory in which you ran `shelltest`;
with `--execdir` they will run in each test file's directory instead.
`--include` selects only tests whose name (file name plus intra-file sequence number) matches a
[.gitignore-style pattern](https://batterseapower.github.io/test-framework#the-console-test-runner),
while `--exclude` skips tests based on their file path.
These can be used eg to focus on a particular test, or to skip tests intended for a different platform.
`-D/--defmacro` defines a macro that is replaced by preprocessor before any tests are parsed and run.
`-w/--with` replaces the first word of all test commands with something
else, which can be useful for testing alternate versions of a
program. Commands which have been prefixed by an extra space will
not be affected by this option.
`--hide-successes` gives quieter output, reporting only failed tests.
Long flags can be abbreviated to a unique prefix.
For example, the command:
$ shelltest tests -i args -c -j8 -o1 -DCONF_FILE=test/myconf.cfq --hide
- runs the tests defined in any `*.test` file in or below the `tests/` directory
- whose names contain "`args`"
- in colour if possible
- with up to 8 tests running in parallel
- allowing no more than 1 second for each test
- replacing the text "`CONF_FILE`" in all tests with "`test/myconf.cfq`"
- reporting only the failures.
## Test formats
shelltestrunner 1.9 adds some experimental new test file formats, described below.
These need more real-world testing and may evolve further, but they will remain supported or will have a migration path.
| Format name | Description | Delimiters, in order |
|-------------|------------------------------------------------------------------------------|----------------------------|
| format 1 | command first, exit status is required | `(none) <<< >>> >>>2 >>>=` |
| format 2 | input first, can be reused by multiple tests, some delimiters can be omitted | `<<< $$$ >>> >>>2 >>>=` |
| format 3 | like format 2, but with shorter delimiters | `< $ > >2 >=` |
shelltestrunner tries to parse each file first with format 2, then format 3, then format 1.
All tests within a file should use the same format.
I suggest choosing format 3 (short delimiters), switching to format 2 when longer delimiters are needed.
### Format 1
Test files contain one or more individual tests, each consisting of a
one-line shell command, optional input, expected standard output
and/or error output, and a (required) exit status.
# COMMENTS OR BLANK LINES
COMMAND LINE
<<<
INPUT
>>>
EXPECTED OUTPUT (OR >>> /REGEXP/)
>>>2
EXPECTED STDERR (OR >>>2 /REGEXP/)
>>>= EXPECTED EXIT STATUS (OR >>>= /REGEXP/)
When not specified, stdout/stderr are ignored.
A space before the command protects it from -w/--with.
Examples:
[above](#usage),
[shelltestrunner](https://github.com/simonmichael/shelltestrunner/tree/master/tests/format1),
[hledger](https://github.com/simonmichael/hledger/tree/master/tests),
[berp](https://github.com/bjpop/berp/tree/master/test/regression),
[cblrepo](https://github.com/magthe/cblrepo/tree/master/tests).
### Format 2
(shelltestrunner 1.9+)
This improves on format 1 in two ways: it allows tests to reuse the
same input, and it allows delimiters to often be omitted.
Test files contain one or more test groups.
A test group consists of some optional standard input and one or more tests.
Each test is a one-line shell command followed by optional expected standard output,
error output and/or numeric exit status, separated by delimiters.
# COMMENTS OR BLANK LINES
<<<
INPUT
$$$ COMMAND LINE
>>>
EXPECTED OUTPUT (OR >>> /REGEX/)
>>>2
EXPECTED STDERR (OR >>>2 /REGEX/)
>>>= EXPECTED EXIT STATUS (OR >>>= /REGEX/ OR >>>=)
# COMMENTS OR BLANK LINES
ADDITIONAL TESTS FOR THIS INPUT
ADDITIONAL TEST GROUPS WITH DIFFERENT INPUT
All test parts are optional except the command line.
If not specified, stdout and stderr are expected to be empty
and exit status is expected to be zero.
Two spaces between `$$$` and the command protects it from -w/--with.
The `<<<` delimiter is optional for the first input in a file.
Without it, input begins at the first non-blank/comment line.
Input ends at the `$$$` delimiter. You can't put a comment before the first `$$$`.
The `>>>` delimiter is optional except when matching via regex.
Expected output/stderr extends to the next `>>>2` or `>>>=` if present,
or to the last non-blank/comment line before the next `<<<` or `$$$` or file end.
`/REGEX/` regular expression patterns may be used instead of
specifying the expected output in full. The regex syntax is
[regex-tdfa](http://hackage.haskell.org/package/regex-tdfa)'s, plus
you can put `!` before `/REGEX/` to negate the match.
The [exit status](http://en.wikipedia.org/wiki/Exit_status) is a
number, normally 0 for a successful exit. This too can be prefixed
with `!` to negate the match, or you can use a `/REGEX/` pattern.
A `>>>=` with nothing after it ignores the exit status.
Examples:
All delimiters explicit:
# cat copies its input to stdout
<<<
foo
$$$ cat
>>>
foo
# or, given a bad flag, prints a platform-specific error and exits with non-zero status
$$$ cat --no-such-flag
>>>2 /(unrecognized|illegal) option/
>>>= !0
# echo ignores the input and prints a newline.
# We need the >>>= (or a >>>2) to delimit the whitespace which
# would otherwise be ignored.
$$$ echo
>>>
>>>=
Non-required `<<<` and `>>>` delimiters omitted:
foo
$$$ cat
foo
$$$ cat --no-such-flag
>>>2 /(unrecognized|illegal) option/
>>>= !0
$$$ echo
>>>=
### Format 3
(shelltestrunner 1.9+)
The same as format 2, but with more convenient short delimiters: < $ > >2 >=.
# COMMENTS OR BLANK LINES
<
INPUT
$ COMMAND LINE
>
EXPECTED OUTPUT (OR > /REGEX/)
>2
EXPECTED STDERR (OR >2 /REGEX/)
>= EXPECTED EXIT STATUS (OR >= /REGEX/ OR >=)
# COMMENTS OR BLANK LINES
ADDITIONAL TESTS FOR THIS INPUT
ADDITIONAL TEST GROUPS WITH DIFFERENT INPUT
Examples:
All delimiters explicit:
# cat copies its input to stdout
<
foo
$ cat
>
foo
# or, given a bad flag, prints a platform-specific error and exits with non-zero status
$ cat --no-such-flag
>2 /(unrecognized|illegal) option/
>= !0
# echo ignores the input and prints a newline.
# We use an explicit >= (or >2) to delimit the whitespace which
# would otherwise be ignored.
$ echo
>
>=
Non-required `<` and `>` delimiters omitted:
foo
$ cat
foo
$ cat --no-such-flag
>2 /(unrecognized|illegal) option/
>= !0
$ echo
>
>2
[shelltestrunner](https://github.com/simonmichael/shelltestrunner/tree/master/tests/format3)
## Support/Contribute
|||
|----------------------|--------------------------------------------------|
| Released version: | http://hackage.haskell.org/package/shelltestrunner
| Changelog: | http://hackage.haskell.org/package/shelltestrunner/changelog
| Code | https://github.com/simonmichael/shelltestrunner
| Issues | https://github.com/simonmichael/shelltestrunner/issues
| IRC | http://webchat.freenode.net?channels=shelltestrunner
[2012 user survey](https://docs.google.com/spreadsheet/pub?key=0Au47MrJax8HpdGpZSzdhWHlCUkJpR2hjX1MwMWFoUEE&single=true&gid=3&output=html).
Feedback, testing, code, documentation, packaging, blogging, and funding are most welcome.
