smp_utils-0.97/0000755000175000017500000000000011706323060012462 5ustar douggdouggsmp_utils-0.97/Makefile.in0000664000175000017500000005413411661054767014557 0ustar douggdougg# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = . DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ config.guess config.sub depcomp install-sh ltmain.sh missing ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir dist dist-all distcheck ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d "$(distdir)" \ || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr "$(distdir)"; }; } am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ SMPUTILS_LIBS = @SMPUTILS_LIBS@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ os_deps = @os_deps@ os_libs = @os_libs@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = include \ lib \ src \ doc EXTRA_DIST = autogen.sh COVERAGE CREDITS all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: @: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-lzma: distdir tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma $(am__remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lzma*) \ lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @$(am__cd) '$(distuninstallcheck_dir)' \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile config.h installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-local distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ ctags-recursive install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am am--refresh check check-am clean clean-generic \ clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \ distcheck distclean distclean-generic distclean-hdr \ distclean-libtool distclean-local distclean-tags \ distcleancheck distdir distuninstallcheck dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am distclean-local: rm -rf autom4te.cache rm -f build-stamp configure-stamp # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: smp_utils-0.97/AUTHORS0000664000175000017500000000005710643271770013547 0ustar douggdouggDouglas Gilbert smp_utils-0.97/config.guess0000775000175000017500000012673011661054767015034 0ustar douggdougg#! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, # 2011 Free Software Foundation, Inc. timestamp='2011-05-11' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA # 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Per Bothner. Please send patches (context # diff format) to and include a ChangeLog # entry. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # # You can get the latest version of this script from: # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system \`$me' is run on. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi trap 'exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; dummy=$tmp/dummy ; tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; case $CC_FOR_BUILD,$HOST_CC,$CC in ,,) echo "int x;" > $dummy.c ; for c in cc gcc c89 c99 ; do if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` case "${UNAME_MACHINE_ARCH}" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; sh5el) machine=sh5le-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. case "${UNAME_MACHINE_ARCH}" in arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ELF__ then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. case "${UNAME_VERSION}" in Debian*) release='-gnu' ;; *) release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit ;; *:OpenBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} exit ;; *:ekkoBSD:*:*) echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} exit ;; *:SolidBSD:*:*) echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} exit ;; macppc:MirBSD:*:*) echo powerpc-unknown-mirbsd${UNAME_RELEASE} exit ;; *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ;; *5.*) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ;; esac # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU # types through head -n 1, so we only detect the type of CPU 0. ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") UNAME_MACHINE="alpha" ;; "EV4.5 (21064)") UNAME_MACHINE="alpha" ;; "LCA4 (21066/21068)") UNAME_MACHINE="alpha" ;; "EV5 (21164)") UNAME_MACHINE="alphaev5" ;; "EV5.6 (21164A)") UNAME_MACHINE="alphaev56" ;; "EV5.6 (21164PC)") UNAME_MACHINE="alphapca56" ;; "EV5.7 (21164PC)") UNAME_MACHINE="alphapca57" ;; "EV6 (21264)") UNAME_MACHINE="alphaev6" ;; "EV6.7 (21264A)") UNAME_MACHINE="alphaev67" ;; "EV6.8CB (21264C)") UNAME_MACHINE="alphaev68" ;; "EV6.8AL (21264B)") UNAME_MACHINE="alphaev68" ;; "EV6.8CX (21264D)") UNAME_MACHINE="alphaev68" ;; "EV6.9A (21264/EV69A)") UNAME_MACHINE="alphaev69" ;; "EV7 (21364)") UNAME_MACHINE="alphaev7" ;; "EV7.9 (21364A)") UNAME_MACHINE="alphaev79" ;; esac # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` # Reset EXIT trap before exiting to avoid spurious non-zero exit code. exitcode=$? trap '' 0 exit $exitcode ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix exit ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos exit ;; *:OS/390:*:*) echo i370-ibm-openedition exit ;; *:z/VM:*:*) echo s390-ibm-zvmoe exit ;; *:OS400:*:*) echo powerpc-ibm-os400 exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit ;; arm:riscos:*:*|arm:RISCOS:*:*) echo arm-unknown-riscos exit ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 exit ;; DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7; exit ;; esac ;; s390x:SunOS:*:*) echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) echo i386-pc-auroraux${UNAME_RELEASE} exit ;; i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) eval $set_cc_for_build SUN_ARCH="i386" # If there is a compiler, see if it is configured for 64-bit objects. # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. # This test works for both compilers. if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then SUN_ARCH="x86_64" fi fi echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` exit ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} ;; sun4) echo sparc-sun-sunos${UNAME_RELEASE} ;; esac exit ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit ;; m68k:machten:*:*) echo m68k-apple-machten${UNAME_RELEASE} exit ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} exit ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && SYSTEM_NAME=`$dummy $dummyarg` && { echo "$SYSTEM_NAME"; exit; } echo mips-mips-riscos${UNAME_RELEASE} exit ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax exit ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax exit ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ [ ${TARGET_BINARY_INTERFACE}x = x ] then echo m88k-dg-dgux${UNAME_RELEASE} else echo m88k-dg-dguxbcs${UNAME_RELEASE} fi else echo i586-dg-dgux${UNAME_RELEASE} fi exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` exit ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix exit ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} exit ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` then echo "$SYSTEM_NAME" else echo rs6000-ibm-aix3.2.5 fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit ;; *:AIX:*:[4567]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit ;; *:AIX:*:*) echo rs6000-ibm-aix exit ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "${sc_kernel_bits}" in 32) HP_ARCH="hppa2.0n" ;; 64) HP_ARCH="hppa2.0w" ;; '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 esac ;; esac fi if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac if [ ${HP_ARCH} = "hppa2.0w" ] then eval $set_cc_for_build # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler # generating 64-bit code. GNU and HP use different nomenclature: # # $ CC_FOR_BUILD=cc ./config.guess # => hppa2.0w-hp-hpux11.23 # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess # => hppa64-hp-hpux11.23 if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | grep -q __LP64__ then HP_ARCH="hppa2.0w" else HP_ARCH="hppa64" fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} exit ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } echo unknown-hitachi-hiuxwe2 exit ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd exit ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi exit ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; *:UNICOS/mp:*:*) echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; 5000:UNIX_System_V:4.*:*) FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} exit ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit ;; *:FreeBSD:*:*) case ${UNAME_MACHINE} in pc98) echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; amd64) echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; *) echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; esac exit ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; *:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; i*:windows32*:*) # uname -m includes "-pc" on this system. echo ${UNAME_MACHINE}-mingw32 exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; *:Interix*:*) case ${UNAME_MACHINE} in x86) echo i586-pc-interix${UNAME_RELEASE} exit ;; authenticamd | genuineintel | EM64T) echo x86_64-unknown-interix${UNAME_RELEASE} exit ;; IA64) echo ia64-unknown-interix${UNAME_RELEASE} exit ;; esac ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit ;; 8664:Windows_NT:*) echo x86_64-pc-mks exit ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix exit ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit ;; amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) echo x86_64-unknown-cygwin exit ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin exit ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; *:GNU:*:*) # the GNU system echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit ;; *:GNU/*:*:*) # other systems with GNU libc and userland echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu exit ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep -q ld.so.1 if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} exit ;; arm*:Linux:*:*) eval $set_cc_for_build if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_EABI__ then echo ${UNAME_MACHINE}-unknown-linux-gnu else if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_PCS_VFP then echo ${UNAME_MACHINE}-unknown-linux-gnueabi else echo ${UNAME_MACHINE}-unknown-linux-gnueabihf fi fi exit ;; avr32*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; cris:Linux:*:*) echo cris-axis-linux-gnu exit ;; crisv32:Linux:*:*) echo crisv32-axis-linux-gnu exit ;; frv:Linux:*:*) echo frv-unknown-linux-gnu exit ;; i*86:Linux:*:*) LIBC=gnu eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __dietlibc__ LIBC=dietlibc #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` echo "${UNAME_MACHINE}-pc-linux-${LIBC}" exit ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m32r*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; mips:Linux:*:* | mips64:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef ${UNAME_MACHINE} #undef ${UNAME_MACHINE}el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=${UNAME_MACHINE}el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=${UNAME_MACHINE} #else CPU= #endif #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; or32:Linux:*:*) echo or32-unknown-linux-gnu exit ;; padre:Linux:*:*) echo sparc-unknown-linux-gnu exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-gnu exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) echo hppa1.1-unknown-linux-gnu ;; PA8*) echo hppa2.0-unknown-linux-gnu ;; *) echo hppa-unknown-linux-gnu ;; esac exit ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-gnu exit ;; ppc:Linux:*:*) echo powerpc-unknown-linux-gnu exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux exit ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; tile*:Linux:*:*) echo ${UNAME_MACHINE}-tilera-linux-gnu exit ;; vax:Linux:*:*) echo ${UNAME_MACHINE}-dec-linux-gnu exit ;; x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu exit ;; xtensa*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 exit ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx exit ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop exit ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos exit ;; i*86:syllable:*:*) echo ${UNAME_MACHINE}-pc-syllable exit ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp exit ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit ;; i*86:*:5:[678]*) # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} exit ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i586. # Note: whatever this is, it MUST be the same as what config.sub # prints for the "djgpp" host, or else GDB configury will decide that # this is a cross-build. echo i586-pc-msdosdjgpp exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit ;; paragon:*:*:*) echo i860-intel-osf1 exit ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi exit ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv exit ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix exit ;; M68*:*:R3V[5678]*:*) test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4; exit; } ;; NCR*:*:4.2:* | MPRAS*:*:4.2:*) OS_REL='.3' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 exit ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo ${UNAME_MACHINE}-sni-sysv4 else echo ns32k-sni-sysv fi exit ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit ;; i*86:VOS:*:*) # From Paul.Green@stratus.com. echo ${UNAME_MACHINE}-stratus-vos exit ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit ;; BePC:Haiku:*:*) # Haiku running on Intel PC compatible. echo i586-pc-haiku exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit ;; SX-7:SUPER-UX:*:*) echo sx7-nec-superux${UNAME_RELEASE} exit ;; SX-8:SUPER-UX:*:*) echo sx8-nec-superux${UNAME_RELEASE} exit ;; SX-8R:SUPER-UX:*:*) echo sx8r-nec-superux${UNAME_RELEASE} exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit ;; *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown case $UNAME_PROCESSOR in i386) eval $set_cc_for_build if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then UNAME_PROCESSOR="x86_64" fi fi ;; unknown) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} exit ;; *:QNX:*:4*) echo i386-pc-qnx exit ;; NEO-?:NONSTOP_KERNEL:*:*) echo neo-tandem-nsk${UNAME_RELEASE} exit ;; NSE-?:NONSTOP_KERNEL:*:*) echo nse-tandem-nsk${UNAME_RELEASE} exit ;; NSR-?:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux exit ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv exit ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} exit ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "$cputype" = "386"; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 exit ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit ;; *:TENEX:*:*) echo pdp10-unknown-tenex exit ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 exit ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 exit ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 exit ;; *:ITS:*:*) echo pdp10-unknown-its exit ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} exit ;; *:DragonFly:*:*) echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit ;; *:*VMS:*:*) UNAME_MACHINE=`(uname -p) 2>/dev/null` case "${UNAME_MACHINE}" in A*) echo alpha-dec-vms ; exit ;; I*) echo ia64-dec-vms ; exit ;; V*) echo vax-dec-vms ; exit ;; esac ;; *:XENIX:*:SysV) echo i386-pc-xenix exit ;; i*86:skyos:*:*) echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' exit ;; i*86:rdos:*:*) echo ${UNAME_MACHINE}-pc-rdos exit ;; i*86:AROS:*:*) echo ${UNAME_MACHINE}-pc-aros exit ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 eval $set_cc_for_build cat >$dummy.c < # include #endif main () { #if defined (sony) #if defined (MIPSEB) /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, I don't know.... */ printf ("mips-sony-bsd\n"); exit (0); #else #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 "4" #else "" #endif ); exit (0); #endif #endif #if defined (__arm) && defined (__acorn) && defined (__unix) printf ("arm-acorn-riscix\n"); exit (0); #endif #if defined (hp300) && !defined (hpux) printf ("m68k-hp-bsd\n"); exit (0); #endif #if defined (NeXT) #if !defined (__ARCHITECTURE__) #define __ARCHITECTURE__ "m68k" #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; if (version < 4) printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); else printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif #if defined (MULTIMAX) || defined (n16) #if defined (UMAXV) printf ("ns32k-encore-sysv\n"); exit (0); #else #if defined (CMU) printf ("ns32k-encore-mach\n"); exit (0); #else printf ("ns32k-encore-bsd\n"); exit (0); #endif #endif #endif #if defined (__386BSD__) printf ("i386-pc-bsd\n"); exit (0); #endif #if defined (sequent) #if defined (i386) printf ("i386-sequent-dynix\n"); exit (0); #endif #if defined (ns32000) printf ("ns32k-sequent-dynix\n"); exit (0); #endif #endif #if defined (_SEQUENT_) struct utsname un; uname(&un); if (strncmp(un.version, "V2", 2) == 0) { printf ("i386-sequent-ptx2\n"); exit (0); } if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ printf ("i386-sequent-ptx1\n"); exit (0); } printf ("i386-sequent-ptx\n"); exit (0); #endif #if defined (vax) # if !defined (ultrix) # include # if defined (BSD) # if BSD == 43 printf ("vax-dec-bsd4.3\n"); exit (0); # else # if BSD == 199006 printf ("vax-dec-bsd4.3reno\n"); exit (0); # else printf ("vax-dec-bsd\n"); exit (0); # endif # endif # else printf ("vax-dec-bsd\n"); exit (0); # endif # else printf ("vax-dec-ultrix\n"); exit (0); # endif #endif #if defined (alliant) && defined (i860) printf ("i860-alliant-bsd\n"); exit (0); #endif exit (1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } # Apollos put the system type in the environment. test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } # Convex versions that predate uname can use getsysinfo(1) if [ -x /usr/convex/getsysinfo ] then case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd exit ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; c34*) echo c34-convex-bsd exit ;; c38*) echo c38-convex-bsd exit ;; c4*) echo c4-convex-bsd exit ;; esac fi cat >&2 < in order to provide the needed information to handle your system. config.guess timestamp = $timestamp uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = ${UNAME_MACHINE} UNAME_RELEASE = ${UNAME_RELEASE} UNAME_SYSTEM = ${UNAME_SYSTEM} UNAME_VERSION = ${UNAME_VERSION} EOF exit 1 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: smp_utils-0.97/configure.ac0000664000175000017500000000413311661054767014772 0ustar douggdouggAC_INIT(smp_utils, 0.97, dgilbert@interlog.com) AM_INIT_AUTOMAKE AM_MAINTAINER_MODE AM_CONFIG_HEADER(config.h) AC_PROG_CC # AC_PROG_CXX AC_PROG_INSTALL # Adding libtools to the build seems to bring in C++ environment AC_PROG_LIBTOOL # check for headers AC_HEADER_STDC AC_CHECK_HEADERS([linux/types.h linux/bsg.h], [], [], [[#ifdef HAVE_LINUX_TYPES_H # include #endif ]]) # AC_CHECK_FUNCS(getopt_long, # GETOPT_O_FILES='', # GETOPT_O_FILES='getopt_long.o') # AC_SUBST(GETOPT_O_FILES) AC_CANONICAL_HOST AC_DEFINE_UNQUOTED(SMP_UTILS_BUILD_HOST, "${host}", [smp_utils Build Host]) case "${host}" in *-*-linux-gnu*) AC_SUBST([os_deps], ['sg_pt_linux.o']) AC_DEFINE_UNQUOTED(SMP_UTILS_LINUX, 1, [smp_utils on linux]) AC_SUBST([os_libs], ['']) ;; *-*-linux*) AC_SUBST([os_deps], ['sg_pt_linux.o']) AC_DEFINE_UNQUOTED(SMP_UTILS_LINUX, 1, [smp_utils on linux]) AC_SUBST([os_libs], ['']) ;; *-*-freebsd*|*-*-kfreebsd*-gnu*) AC_SUBST([os_deps], ['sg_pt_freebsd.o']) AC_DEFINE_UNQUOTED(SMP_UTILS_FREEBSD, 1, [smp_utils on FreeBSD]) AC_SUBST([os_libs], ['-lcam']);; *-*-solaris*) AC_SUBST([os_deps], ['sg_pt_solaris.o']) AC_DEFINE_UNQUOTED(SMP_UTILS_SOLARIS, 1, [smp_utils on Solaris]) AC_SUBST([os_libs], ['']);; *) AC_SUBST([os_deps], ['sg_pt_linux.o']) AC_DEFINE_UNQUOTED(SMP_UTILS_LINUX, 1, [assume smp_utils on linux]) AC_SUBST([os_libs], ['']) ;; esac # Define platform-specific symbol. AM_CONDITIONAL(OS_FREEBSD, [echo $host_os | grep 'freebsd' > /dev/null]) AM_CONDITIONAL(OS_LINUX, [echo $host_os | grep '^linux' > /dev/null]) AM_CONDITIONAL(OS_SOLARIS, [echo $host_os | grep '^solaris' > /dev/null]) AC_CHECK_LIB(smputils1, smp_send_req, [SMPUTILS_LIBS="-lsmputils1"; have_smputils=yes], have_smputils=no) AC_SUBST(SMPUTILS_LIBS) AM_CONDITIONAL(HAVE_SMPUTILS, test x"$have_smputils" = xyes) AC_OUTPUT(Makefile include/Makefile lib/Makefile src/Makefile doc/Makefile) smp_utils-0.97/README.linux0000664000175000017500000000264311617607776014533 0ustar douggdouggBuild ----- For general build information see the INSTALL file. A "spec" file is included for building rpm packages. It is called smp_utils.spec . To build binary and source rpms place a copy of the gzipped tarball in the "SOURCES" directory and place a copy of smp_utils.spec in the "SPEC" directory. These directories are found under /usr/src/redhat on redhat/fedora distributions. Then from the "SPEC" directory execute "rpmbuild -ba --target i386 smp_utils.spec". If all goes well a source rpm should be found in the SRPMS directory and binary rpms in the RPMS/i386 directory (for i386 architecture). When the smp_utils binary rpm is installed the executables and their associated man pages should be placed in appropriate places. To build debian "deb" (binary) packages, first untar the tarball, then change directory to the top level within the smp_utils source. Then: # chmod +x debian/rules # dpkg-buildpackage -b -rfakeroot The binary deb packages will be placed in the parent directory (of the smp_utils source directory) if all goes well. The build_debian.sh script contains the above commands. Device names ------------ All of the man page examples and the scripts in the examples directory use Linux device names for accessing SAS expanders. The preferred interface is through the bsg driver. Examples of the bsg driver's device node names are /dev/bsg/expander-6:0 and /dev/bsg/sas_host6 . Douglas Gilbert 6th August 2011 smp_utils-0.97/include/0000755000175000017500000000000011706323060014105 5ustar douggdouggsmp_utils-0.97/include/Makefile.in0000664000175000017500000003225211661054767016177 0ustar douggdougg# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = include DIST_COMMON = $(scsiinclude_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(scsiincludedir)" HEADERS = $(scsiinclude_HEADERS) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ SMPUTILS_LIBS = @SMPUTILS_LIBS@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ os_deps = @os_deps@ os_libs = @os_libs@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ scsiincludedir = $(includedir)/scsi scsiinclude_HEADERS = \ smp_lib.h all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu include/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu include/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-scsiincludeHEADERS: $(scsiinclude_HEADERS) @$(NORMAL_INSTALL) test -z "$(scsiincludedir)" || $(MKDIR_P) "$(DESTDIR)$(scsiincludedir)" @list='$(scsiinclude_HEADERS)'; test -n "$(scsiincludedir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(scsiincludedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(scsiincludedir)" || exit $$?; \ done uninstall-scsiincludeHEADERS: @$(NORMAL_UNINSTALL) @list='$(scsiinclude_HEADERS)'; test -n "$(scsiincludedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(scsiincludedir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(scsiincludedir)" && rm -f $$files ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(HEADERS) installdirs: for dir in "$(DESTDIR)$(scsiincludedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-scsiincludeHEADERS install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-scsiincludeHEADERS .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libtool ctags distclean distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-scsiincludeHEADERS \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags uninstall uninstall-am uninstall-scsiincludeHEADERS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: smp_utils-0.97/include/smp_lib.h0000664000175000017500000002441711617405305015721 0ustar douggdougg#ifndef SMP_LIB_H #define SMP_LIB_H /* * Copyright (c) 2006-2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ /* * Version: see version_str in smp_lib.c */ /* This header file contains defines and function declarations that may * be useful to Linux applications that communicate with devices that * use the Serial Attached SCSI (SAS) Management Protocol (SMP). * Reference: SCSI: http://www.t10.org and the most recent SAS draft * SAS-2 (revision 9). * This header is organised into two parts: part 1 is operating system * independent (i.e. may be useful to other OSes) and part 2 is Linux * specific (or at least closely related). */ #ifdef __cplusplus extern "C" { #endif /* SAS transport frame types associated with SMP */ #define SMP_FRAME_TYPE_REQ 0x40 #define SMP_FRAME_TYPE_RESP 0x41 /* SMP function codes */ #define SMP_FN_REPORT_GENERAL 0x0 #define SMP_FN_REPORT_MANUFACTURER 0x1 #define SMP_FN_READ_GPIO_REG 0x2 #define SMP_FN_REPORT_SELF_CONFIG 0x3 #define SMP_FN_REPORT_ZONE_PERMISSION_TBL 0x4 #define SMP_FN_REPORT_ZONE_MANAGER_PASS 0x5 #define SMP_FN_REPORT_BROADCAST 0x6 #define SMP_FN_READ_GPIO_REG_ENH 0x7 #define SMP_FN_DISCOVER 0x10 #define SMP_FN_REPORT_PHY_ERR_LOG 0x11 #define SMP_FN_REPORT_PHY_SATA 0x12 #define SMP_FN_REPORT_ROUTE_INFO 0x13 #define SMP_FN_REPORT_PHY_EVENT 0x14 /* #define SMP_FN_REPORT_PHY_BROADCAST 0x15 removed in sas2r13 */ #define SMP_FN_DISCOVER_LIST 0x20 /* was 0x16 in sas2r10 */ #define SMP_FN_REPORT_PHY_EVENT_LIST 0x21 #define SMP_FN_REPORT_EXP_ROUTE_TBL_LIST 0x22 /* was 0x17 in sas2r10 */ #define SMP_FN_CONFIG_GENERAL 0x80 #define SMP_FN_ENABLE_DISABLE_ZONING 0x81 #define SMP_FN_WRITE_GPIO_REG 0x82 #define SMP_FN_WRITE_GPIO_REG_ENH 0x83 #define SMP_FN_ZONED_BROADCAST 0x85 #define SMP_FN_ZONE_LOCK 0x86 #define SMP_FN_ZONE_ACTIVATE 0x87 #define SMP_FN_ZONE_UNLOCK 0x88 #define SMP_FN_CONFIG_ZONE_MANAGER_PASS 0x89 #define SMP_FN_CONFIG_ZONE_PHY_INFO 0x8a #define SMP_FN_CONFIG_ZONE_PERMISSION_TBL 0x8b #define SMP_FN_CONFIG_ROUTE_INFO 0x90 #define SMP_FN_PHY_CONTROL 0x91 #define SMP_FN_PHY_TEST_FUNCTION 0x92 #define SMP_FN_CONFIG_PHY_EVENT 0x93 /* SMP function result values */ #define SMP_FRES_FUNCTION_ACCEPTED 0x0 #define SMP_FRES_UNKNOWN_FUNCTION 0x1 #define SMP_FRES_FUNCTION_FAILED 0x2 #define SMP_FRES_INVALID_REQUEST_LEN 0x3 #define SMP_FRES_INVALID_EXP_CHANGE_COUNT 0x4 #define SMP_FRES_BUSY 0x5 #define SMP_FRES_INCOMPLETE_DESCRIPTOR_LIST 0x6 #define SMP_FRES_NO_PHY 0x10 #define SMP_FRES_NO_INDEX 0x11 #define SMP_FRES_NO_SATA_SUPPORT 0x12 #define SMP_FRES_UNKNOWN_PHY_OP 0x13 #define SMP_FRES_UNKNOWN_PHY_TEST_FN 0x14 #define SMP_FRES_PHY_TEST_IN_PROGRESS 0x15 #define SMP_FRES_PHY_VACANT 0x16 #define SMP_FRES_UNKNOWN_PHY_EVENT_SRC 0x17 #define SMP_FRES_UNKNOWN_DESCRIPTOR_TYPE 0x18 #define SMP_FRES_UNKNOWN_PHY_FILTER 0x19 #define SMP_FRES_AFFILIATION_VIOLATION 0x1a #define SMP_FRES_SMP_ZONE_VIOLATION 0x20 #define SMP_FRES_NO_MANAGEMENT_ACCESS 0x21 #define SMP_FRES_UNKNOWN_EN_DIS_ZONING_VAL 0x22 #define SMP_FRES_ZONE_LOCK_VIOLATION 0x23 #define SMP_FRES_NOT_ACTIVATED 0x24 #define SMP_FRES_ZONE_GROUP_OUT_OF_RANGE 0x25 #define SMP_FRES_NO_PHYSICAL_PRESENCE 0x26 #define SMP_FRES_SAVING_NOT_SUPPORTED 0x27 #define SMP_FRES_SOURCE_ZONE_GROUP 0x28 #define SMP_FRES_DIS_PASSWORD_NOT_SUPPORTED 0x29 /* Utilities can use these process status values for syntax errors and file (device node) problems (e.g. not found or permissions). Numbers between 1 and 32 are reserved for SMP function result values */ #define SMP_LIB_SYNTAX_ERROR 91 #define SMP_LIB_FILE_ERROR 92 #define SMP_LIB_CAT_MALFORMED 97 #define SMP_LIB_CAT_OTHER 99 #define SMP_MAX_DEVICE_NAME 256 #ifdef SMP_UTILS_LINUX #define SMP_SUBVALUE_SEPARATOR ',' #elif defined(SMP_UTILS_SOLARIS) #define SMP_SUBVALUE_SEPARATOR '^' #else #define SMP_SUBVALUE_SEPARATOR ',' #endif struct smp_target_obj { char device_name[SMP_MAX_DEVICE_NAME]; int subvalue; /* adapter number (opt) */ unsigned char sas_addr[8]; /* target SMP (opt) */ int interface_selector; int opened; int fd; void * vp; /* opaque for pass-through (e.g. CAM) */ }; /* SAS standards include a 4 byte CRC at the end of each SMP request and response framesl. All current pass-throughs calculate and check the CRC in the driver, but some pass-throughs want the space allocated. */ struct smp_req_resp { int request_len; /* [i] in bytes, includes space for 4 byte CRC */ unsigned char * request; /* [*i], includes space for CRC */ int max_response_len; /* [i] in bytes, includes space for CRC */ unsigned char * response; /* [*o] */ int act_response_len; /* [o] -1 implies don't know */ int transport_err; /* [o] 0 implies no error */ }; /* Open device_name (perhaps using associated subvalue, i_params, and sa * fields) and if successful places context information in the object pointed * to by tobj . Returns 0 on success, else -1 . */ extern int smp_initiator_open(const char * device_name, int subvalue, const char * i_params, unsigned long long sa, struct smp_target_obj * tobj, int verbose); /* Send a SMP request to the SMP target referred to by tobj. The request * and space for the response (including the CRC even if it is not sent * or returned) are in the object pointed to by rresp. Returns 0 on * success. */ extern int smp_send_req(const struct smp_target_obj * tobj, struct smp_req_resp * rresp, int verbose); /* Closes the context to the SMP target referred to by tobj. Returns 0 * on success, else -1 . */ extern int smp_initiator_close(struct smp_target_obj * tobj); /* Given an SMP function response code in func_res, places the associated * string (most likely an error if func_res > 0) in the area pointed to * by buffer. That string will not exceed buff_len bytes. Returns buff * as its result. */ extern char * smp_get_func_res_str(int func_res, int buff_len, char * buff); /* Returns the request length in dwords associated with func_code in SAS-1. * The dword count excludes the 4 byte header and the 4 byte CRC (i.e. * eight bytes or two dwords). Returns -2 for no default (e.g. functions * found in SAS-2 or later) and -3 for a different format (e.g. READ GPIO * REGISTER). */ extern int smp_get_func_def_req_len(int func_code); /* Returns the expected response length in dwords associated with func_code * in SAS-1. The dword count excludes the 4 byte header and the 4 byte CRC. * Returns -2 for no default and -3 for a different format (e.g. READ GPIO * REGISTER). */ extern int smp_get_func_def_resp_len(int func_code); /* SAS addresses are NAA-5 and should have 5 in their most significant * nibbe. Returns 1 if NAA-5 format, else 0. */ extern int smp_is_naa5(unsigned long long addr); extern const char * smp_lib_version(); struct smp_val_name { int value; char * name; }; /* <<< General purpose (i.e. not SMP specific) utility functions >>> */ /* Always returns valid string even if errnum is wild (or library problem). If errnum is negative, flip its sign. */ extern char * safe_strerror(int errnum); /* Print (to stdout) 'str' of bytes in hex, 16 bytes per line optionally followed at the right hand side of the line with an ASCII interpretation. Each line is prefixed with an address, starting at 0 for str[0]..str[15]. All output numbers are in hex. 'no_ascii' allows for 3 output types: > 0 each line has address then up to 16 ASCII-hex bytes = 0 in addition, the bytes are listed in ASCII to the right < 0 only the ASCII-hex bytes are listed (i.e. without address) */ extern void dStrHex(const char* str, int len, int no_ascii); /* If the number in 'buf' can not be decoded or the multiplier is unknown then -1 is returned. Accepts a hex prefix (0x or 0X) or a 'h' (or 'H') suffix. Otherwise a decimal multiplier suffix may be given. Recognised multipliers: c C *1; w W *2; b B *512; k K KiB *1,024; KB *1,000; m M MiB *1,048,576; MB *1,000,000; g G GiB *1,073,741,824; GB *1,000,000,000 and x which multiplies by . */ extern int smp_get_num(const char * buf); /* If the number in 'buf' can not be decoded or the multiplier is unknown then -1LL is returned. Accepts a hex prefix (0x or 0X) or a 'h' (or 'H') suffix. Otherwise a decimal multiplier suffix may be given. In addition to supporting the multipliers of smp_get_num(), this function supports: t T TiB *(2**40); TB *(10**12); p P PiB *(2**50); PB *(10**15) . */ extern long long smp_get_llnum(const char * buf); /* If the non-negative number in 'buf' can be decoded in decimal (default) * or hex then it is returned, else -1 is returned. Skips leading and * trailing spaces, tabs and commas. Hex numbers are indicated by a "0x" * or "0X" prefix, or by a 'h' or 'H' suffix. */ int smp_get_dhnum(const char * buf); #ifdef __cplusplus } #endif #endif smp_utils-0.97/include/Makefile.am0000664000175000017500000000033711617030111016137 0ustar douggdougg scsiincludedir = $(includedir)/scsi ## Copied from sg3_utils. Some remnants left commented out as examples ## if OS_LINUX scsiinclude_HEADERS = \ smp_lib.h ## noinst_HEADERS = \ ## sg_pt_win32.h ## endif smp_utils-0.97/include/dummy/0000755000175000017500000000000011706323060015240 5ustar douggdouggsmp_utils-0.97/include/dummy/linux/0000755000175000017500000000000011706323060016377 5ustar douggdouggsmp_utils-0.97/include/dummy/linux/bsg.h0000664000175000017500000000531511075171363017337 0ustar douggdougg#ifndef BSG_H #define BSG_H #define BSG_PROTOCOL_SCSI 0 #define BSG_SUB_PROTOCOL_SCSI_CMD 0 #define BSG_SUB_PROTOCOL_SCSI_TMF 1 #define BSG_SUB_PROTOCOL_SCSI_TRANSPORT 2 struct sg_io_v4 { __s32 guard; /* [i] 'Q' to differentiate from v3 */ __u32 protocol; /* [i] 0 -> SCSI , .... */ __u32 subprotocol; /* [i] 0 -> SCSI command, 1 -> SCSI task management function, .... */ __u32 request_len; /* [i] in bytes */ __u64 request; /* [i], [*i] {SCSI: cdb} */ __u64 request_tag; /* [i] {SCSI: task tag (only if flagged)} */ __u32 request_attr; /* [i] {SCSI: task attribute} */ __u32 request_priority; /* [i] {SCSI: task priority} */ __u32 request_extra; /* [i] {spare, for padding} */ __u32 max_response_len; /* [i] in bytes */ __u64 response; /* [i], [*o] {SCSI: (auto)sense data} */ /* "dout_": data out (to device); "din_": data in (from device) */ __u32 dout_iovec_count; /* [i] 0 -> "flat" dout transfer else dout_xfer points to array of iovec */ __u32 dout_xfer_len; /* [i] bytes to be transferred to device */ __u32 din_iovec_count; /* [i] 0 -> "flat" din transfer */ __u32 din_xfer_len; /* [i] bytes to be transferred from device */ __u64 dout_xferp; /* [i], [*i] */ __u64 din_xferp; /* [i], [*o] */ __u32 timeout; /* [i] units: millisecond */ __u32 flags; /* [i] bit mask */ __u64 usr_ptr; /* [i->o] unused internally */ __u32 spare_in; /* [i] */ __u32 driver_status; /* [o] 0 -> ok */ __u32 transport_status; /* [o] 0 -> ok */ __u32 device_status; /* [o] {SCSI: command completion status} */ __u32 retry_delay; /* [o] {SCSI: status auxiliary information} */ __u32 info; /* [o] additional information */ __u32 duration; /* [o] time to complete, in milliseconds */ __u32 response_len; /* [o] bytes of response actually written */ __s32 din_resid; /* [o] din_xfer_len - actual_din_xfer_len */ __s32 dout_resid; /* [o] dout_xfer_len - actual_dout_xfer_len */ __u64 generated_tag; /* [o] {SCSI: transport generated task tag} */ __u32 spare_out; /* [o] */ __u32 padding; }; #ifdef __KERNEL__ #if defined(CONFIG_BLK_DEV_BSG) struct bsg_class_device { struct device *class_dev; struct device *parent; int minor; struct request_queue *queue; struct kref ref; void (*release)(struct device *); }; extern int bsg_register_queue(struct request_queue *q, struct device *parent, const char *name, void (*release)(struct device *)); extern void bsg_unregister_queue(struct request_queue *); #else static inline int bsg_register_queue(struct request_queue *q, struct device *parent, const char *name, void (*release)(struct device *)) { return 0; } static inline void bsg_unregister_queue(struct request_queue *q) { } #endif #endif /* __KERNEL__ */ #endif smp_utils-0.97/NEWS0000664000175000017500000000024211535532401013162 0ustar douggdouggSee ChangeLog, README and INSTALL files. There is also a html page at http://sg.danny.cz/sg/smp_utils.html and an overview man page in this file: doc/smp_utils.8 smp_utils-0.97/aclocal.m40000664000175000017500000123141711661054767014354 0ustar douggdougg# generated automatically by aclocal 1.11.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],, [m4_warning([this file was generated for autoconf 2.68. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'.])]) # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008, 2009, 2010 Free Software Foundation, # Inc. # Written by Gordon Matzigkeit, 1996 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. m4_define([_LT_COPYING], [dnl # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008, 2009, 2010 Free Software Foundation, # Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. # # GNU Libtool is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, or # obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ]) # serial 57 LT_INIT # LT_PREREQ(VERSION) # ------------------ # Complain and exit if this libtool version is less that VERSION. m4_defun([LT_PREREQ], [m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, [m4_default([$3], [m4_fatal([Libtool version $1 or higher is required], 63)])], [$2])]) # _LT_CHECK_BUILDDIR # ------------------ # Complain if the absolute build directory name contains unusual characters m4_defun([_LT_CHECK_BUILDDIR], [case `pwd` in *\ * | *\ *) AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; esac ]) # LT_INIT([OPTIONS]) # ------------------ AC_DEFUN([LT_INIT], [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl AC_BEFORE([$0], [LT_LANG])dnl AC_BEFORE([$0], [LT_OUTPUT])dnl AC_BEFORE([$0], [LTDL_INIT])dnl m4_require([_LT_CHECK_BUILDDIR])dnl dnl Autoconf doesn't catch unexpanded LT_ macros by default: m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 dnl unless we require an AC_DEFUNed macro: AC_REQUIRE([LTOPTIONS_VERSION])dnl AC_REQUIRE([LTSUGAR_VERSION])dnl AC_REQUIRE([LTVERSION_VERSION])dnl AC_REQUIRE([LTOBSOLETE_VERSION])dnl m4_require([_LT_PROG_LTMAIN])dnl _LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) dnl Parse OPTIONS _LT_SET_OPTIONS([$0], [$1]) # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ltmain" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl _LT_SETUP # Only expand once: m4_define([LT_INIT]) ])# LT_INIT # Old names: AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PROG_LIBTOOL], []) dnl AC_DEFUN([AM_PROG_LIBTOOL], []) # _LT_CC_BASENAME(CC) # ------------------- # Calculate cc_basename. Skip known compiler wrappers and cross-prefix. m4_defun([_LT_CC_BASENAME], [for cc_temp in $1""; do case $cc_temp in compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` ]) # _LT_FILEUTILS_DEFAULTS # ---------------------- # It is okay to use these file commands and assume they have been set # sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. m4_defun([_LT_FILEUTILS_DEFAULTS], [: ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} ])# _LT_FILEUTILS_DEFAULTS # _LT_SETUP # --------- m4_defun([_LT_SETUP], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl _LT_DECL([], [host_alias], [0], [The host system])dnl _LT_DECL([], [host], [0])dnl _LT_DECL([], [host_os], [0])dnl dnl _LT_DECL([], [build_alias], [0], [The build system])dnl _LT_DECL([], [build], [0])dnl _LT_DECL([], [build_os], [0])dnl dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl dnl AC_REQUIRE([AC_PROG_LN_S])dnl test -z "$LN_S" && LN_S="ln -s" _LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl dnl AC_REQUIRE([LT_CMD_MAX_LEN])dnl _LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl _LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl m4_require([_LT_CMD_RELOAD])dnl m4_require([_LT_CHECK_MAGIC_METHOD])dnl m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl m4_require([_LT_CMD_OLD_ARCHIVE])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_WITH_SYSROOT])dnl _LT_CONFIG_LIBTOOL_INIT([ # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi ]) if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi _LT_CHECK_OBJDIR m4_require([_LT_TAG_COMPILER])dnl case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld="$lt_cv_prog_gnu_ld" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o _LT_CC_BASENAME([$compiler]) # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then _LT_PATH_MAGIC fi ;; esac # Use C for the default configuration in the libtool script LT_SUPPORTED_TAG([CC]) _LT_LANG_C_CONFIG _LT_LANG_DEFAULT_CONFIG _LT_CONFIG_COMMANDS ])# _LT_SETUP # _LT_PREPARE_SED_QUOTE_VARS # -------------------------- # Define a few sed substitution that help us do robust quoting. m4_defun([_LT_PREPARE_SED_QUOTE_VARS], [# Backslashify metacharacters that are still active within # double-quoted strings. sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\([["`\\]]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' ]) # _LT_PROG_LTMAIN # --------------- # Note that this code is called both from `configure', and `config.status' # now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, # `config.status' has no value for ac_aux_dir unless we are using Automake, # so we pass a copy along to make sure it has a sensible value anyway. m4_defun([_LT_PROG_LTMAIN], [m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl _LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) ltmain="$ac_aux_dir/ltmain.sh" ])# _LT_PROG_LTMAIN # So that we can recreate a full libtool script including additional # tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS # in macros and then make a single call at the end using the `libtool' # label. # _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) # ---------------------------------------- # Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL_INIT], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_INIT], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_INIT]) # _LT_CONFIG_LIBTOOL([COMMANDS]) # ------------------------------ # Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) # _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) # ----------------------------------------------------- m4_defun([_LT_CONFIG_SAVE_COMMANDS], [_LT_CONFIG_LIBTOOL([$1]) _LT_CONFIG_LIBTOOL_INIT([$2]) ]) # _LT_FORMAT_COMMENT([COMMENT]) # ----------------------------- # Add leading comment marks to the start of each line, and a trailing # full-stop to the whole comment if one is not present already. m4_define([_LT_FORMAT_COMMENT], [m4_ifval([$1], [ m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) )]) # _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) # ------------------------------------------------------------------- # CONFIGNAME is the name given to the value in the libtool script. # VARNAME is the (base) name used in the configure script. # VALUE may be 0, 1 or 2 for a computed quote escaped value based on # VARNAME. Any other value will be used directly. m4_define([_LT_DECL], [lt_if_append_uniq([lt_decl_varnames], [$2], [, ], [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], [m4_ifval([$1], [$1], [$2])]) lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) m4_ifval([$4], [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) lt_dict_add_subkey([lt_decl_dict], [$2], [tagged?], [m4_ifval([$5], [yes], [no])])]) ]) # _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) # -------------------------------------------------------- m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) # lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_tag_varnames], [_lt_decl_filter([tagged?], [yes], $@)]) # _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) # --------------------------------------------------------- m4_define([_lt_decl_filter], [m4_case([$#], [0], [m4_fatal([$0: too few arguments: $#])], [1], [m4_fatal([$0: too few arguments: $#: $1])], [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], [lt_dict_filter([lt_decl_dict], $@)])[]dnl ]) # lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) # -------------------------------------------------- m4_define([lt_decl_quote_varnames], [_lt_decl_filter([value], [1], $@)]) # lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_dquote_varnames], [_lt_decl_filter([value], [2], $@)]) # lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_varnames_tagged], [m4_assert([$# <= 2])dnl _$0(m4_quote(m4_default([$1], [[, ]])), m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) m4_define([_lt_decl_varnames_tagged], [m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) # lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_all_varnames], [_$0(m4_quote(m4_default([$1], [[, ]])), m4_if([$2], [], m4_quote(lt_decl_varnames), m4_quote(m4_shift($@))))[]dnl ]) m4_define([_lt_decl_all_varnames], [lt_join($@, lt_decl_varnames_tagged([$1], lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl ]) # _LT_CONFIG_STATUS_DECLARE([VARNAME]) # ------------------------------------ # Quote a variable value, and forward it to `config.status' so that its # declaration there will have the same value as in `configure'. VARNAME # must have a single quote delimited value for this to work. m4_define([_LT_CONFIG_STATUS_DECLARE], [$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) # _LT_CONFIG_STATUS_DECLARATIONS # ------------------------------ # We delimit libtool config variables with single quotes, so when # we write them to config.status, we have to be sure to quote all # embedded single quotes properly. In configure, this macro expands # each variable declared with _LT_DECL (and _LT_TAGDECL) into: # # ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAGS # ---------------- # Output comment and list of tags supported by the script m4_defun([_LT_LIBTOOL_TAGS], [_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl available_tags="_LT_TAGS"dnl ]) # _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) # ----------------------------------- # Extract the dictionary values for VARNAME (optionally with TAG) and # expand to a commented shell variable setting: # # # Some comment about what VAR is for. # visible_name=$lt_internal_name m4_define([_LT_LIBTOOL_DECLARE], [_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [description])))[]dnl m4_pushdef([_libtool_name], m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), [0], [_libtool_name=[$]$1], [1], [_libtool_name=$lt_[]$1], [2], [_libtool_name=$lt_[]$1], [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl ]) # _LT_LIBTOOL_CONFIG_VARS # ----------------------- # Produce commented declarations of non-tagged libtool config variables # suitable for insertion in the LIBTOOL CONFIG section of the `libtool' # script. Tagged libtool config variables (even for the LIBTOOL CONFIG # section) are produced by _LT_LIBTOOL_TAG_VARS. m4_defun([_LT_LIBTOOL_CONFIG_VARS], [m4_foreach([_lt_var], m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAG_VARS(TAG) # ------------------------- m4_define([_LT_LIBTOOL_TAG_VARS], [m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) # _LT_TAGVAR(VARNAME, [TAGNAME]) # ------------------------------ m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) # _LT_CONFIG_COMMANDS # ------------------- # Send accumulated output to $CONFIG_STATUS. Thanks to the lists of # variables for single and double quote escaping we saved from calls # to _LT_DECL, we can put quote escaped variables declarations # into `config.status', and then the shell code to quote escape them in # for loops in `config.status'. Finally, any additional code accumulated # from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. m4_defun([_LT_CONFIG_COMMANDS], [AC_PROVIDE_IFELSE([LT_OUTPUT], dnl If the libtool generation code has been placed in $CONFIG_LT, dnl instead of duplicating it all over again into config.status, dnl then we will have config.status run $CONFIG_LT later, so it dnl needs to know what name is stored there: [AC_CONFIG_COMMANDS([libtool], [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], dnl If the libtool generation code is destined for config.status, dnl expand the accumulated commands and init code now: [AC_CONFIG_COMMANDS([libtool], [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) ])#_LT_CONFIG_COMMANDS # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], [ # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' _LT_CONFIG_STATUS_DECLARATIONS LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$[]1 _LTECHO_EOF' } # Quote evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_quote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_dquote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done _LT_OUTPUT_LIBTOOL_INIT ]) # _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) # ------------------------------------ # Generate a child script FILE with all initialization necessary to # reuse the environment learned by the parent script, and make the # file executable. If COMMENT is supplied, it is inserted after the # `#!' sequence but before initialization text begins. After this # macro, additional text can be appended to FILE to form the body of # the child script. The macro ends with non-zero status if the # file could not be fully written (such as if the disk is full). m4_ifdef([AS_INIT_GENERATED], [m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], [m4_defun([_LT_GENERATED_FILE_INIT], [m4_require([AS_PREPARE])]dnl [m4_pushdef([AS_MESSAGE_LOG_FD])]dnl [lt_write_fail=0 cat >$1 <<_ASEOF || lt_write_fail=1 #! $SHELL # Generated by $as_me. $2 SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$1 <<\_ASEOF || lt_write_fail=1 AS_SHELL_SANITIZE _AS_PREPARE exec AS_MESSAGE_FD>&1 _ASEOF test $lt_write_fail = 0 && chmod +x $1[]dnl m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT # LT_OUTPUT # --------- # This macro allows early generation of the libtool script (before # AC_OUTPUT is called), incase it is used in configure for compilation # tests. AC_DEFUN([LT_OUTPUT], [: ${CONFIG_LT=./config.lt} AC_MSG_NOTICE([creating $CONFIG_LT]) _LT_GENERATED_FILE_INIT(["$CONFIG_LT"], [# Run this file to recreate a libtool stub with the current configuration.]) cat >>"$CONFIG_LT" <<\_LTEOF lt_cl_silent=false exec AS_MESSAGE_LOG_FD>>config.log { echo AS_BOX([Running $as_me.]) } >&AS_MESSAGE_LOG_FD lt_cl_help="\ \`$as_me' creates a local libtool stub from the current configuration, for use in further configure time tests before the real libtool is generated. Usage: $[0] [[OPTIONS]] -h, --help print this help, then exit -V, --version print version number, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files Report bugs to ." lt_cl_version="\ m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) configured by $[0], generated by m4_PACKAGE_STRING. Copyright (C) 2010 Free Software Foundation, Inc. This config.lt script is free software; the Free Software Foundation gives unlimited permision to copy, distribute and modify it." while test $[#] != 0 do case $[1] in --version | --v* | -V ) echo "$lt_cl_version"; exit 0 ;; --help | --h* | -h ) echo "$lt_cl_help"; exit 0 ;; --debug | --d* | -d ) debug=: ;; --quiet | --q* | --silent | --s* | -q ) lt_cl_silent=: ;; -*) AC_MSG_ERROR([unrecognized option: $[1] Try \`$[0] --help' for more information.]) ;; *) AC_MSG_ERROR([unrecognized argument: $[1] Try \`$[0] --help' for more information.]) ;; esac shift done if $lt_cl_silent; then exec AS_MESSAGE_FD>/dev/null fi _LTEOF cat >>"$CONFIG_LT" <<_LTEOF _LT_OUTPUT_LIBTOOL_COMMANDS_INIT _LTEOF cat >>"$CONFIG_LT" <<\_LTEOF AC_MSG_NOTICE([creating $ofile]) _LT_OUTPUT_LIBTOOL_COMMANDS AS_EXIT(0) _LTEOF chmod +x "$CONFIG_LT" # configure is writing to config.log, but config.lt does its own redirection, # appending to config.log, which fails on DOS, as config.log is still kept # open by configure. Here we exec the FD to /dev/null, effectively closing # config.log, so it can be properly (re)opened and appended to by config.lt. lt_cl_success=: test "$silent" = yes && lt_config_lt_args="$lt_config_lt_args --quiet" exec AS_MESSAGE_LOG_FD>/dev/null $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false exec AS_MESSAGE_LOG_FD>>config.log $lt_cl_success || AS_EXIT(1) ])# LT_OUTPUT # _LT_CONFIG(TAG) # --------------- # If TAG is the built-in tag, create an initial libtool script with a # default configuration from the untagged config vars. Otherwise add code # to config.status for appending the configuration named by TAG from the # matching tagged config vars. m4_defun([_LT_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_CONFIG_SAVE_COMMANDS([ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl m4_if(_LT_TAG, [C], [ # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi cfgfile="${ofile}T" trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # _LT_COPYING _LT_LIBTOOL_TAGS # ### BEGIN LIBTOOL CONFIG _LT_LIBTOOL_CONFIG_VARS _LT_LIBTOOL_TAG_VARS # ### END LIBTOOL CONFIG _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac _LT_PROG_LTMAIN # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) _LT_PROG_REPLACE_SHELLFNS mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ], [cat <<_LT_EOF >> "$ofile" dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded dnl in a comment (ie after a #). # ### BEGIN LIBTOOL TAG CONFIG: $1 _LT_LIBTOOL_TAG_VARS(_LT_TAG) # ### END LIBTOOL TAG CONFIG: $1 _LT_EOF ])dnl /m4_if ], [m4_if([$1], [], [ PACKAGE='$PACKAGE' VERSION='$VERSION' TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile'], []) ])dnl /_LT_CONFIG_SAVE_COMMANDS ])# _LT_CONFIG # LT_SUPPORTED_TAG(TAG) # --------------------- # Trace this macro to discover what tags are supported by the libtool # --tag option, using: # autoconf --trace 'LT_SUPPORTED_TAG:$1' AC_DEFUN([LT_SUPPORTED_TAG], []) # C support is built-in for now m4_define([_LT_LANG_C_enabled], []) m4_define([_LT_TAGS], []) # LT_LANG(LANG) # ------------- # Enable libtool support for the given language if not already enabled. AC_DEFUN([LT_LANG], [AC_BEFORE([$0], [LT_OUTPUT])dnl m4_case([$1], [C], [_LT_LANG(C)], [C++], [_LT_LANG(CXX)], [Java], [_LT_LANG(GCJ)], [Fortran 77], [_LT_LANG(F77)], [Fortran], [_LT_LANG(FC)], [Windows Resource], [_LT_LANG(RC)], [m4_ifdef([_LT_LANG_]$1[_CONFIG], [_LT_LANG($1)], [m4_fatal([$0: unsupported language: "$1"])])])dnl ])# LT_LANG # _LT_LANG(LANGNAME) # ------------------ m4_defun([_LT_LANG], [m4_ifdef([_LT_LANG_]$1[_enabled], [], [LT_SUPPORTED_TAG([$1])dnl m4_append([_LT_TAGS], [$1 ])dnl m4_define([_LT_LANG_]$1[_enabled], [])dnl _LT_LANG_$1_CONFIG($1)])dnl ])# _LT_LANG # _LT_LANG_DEFAULT_CONFIG # ----------------------- m4_defun([_LT_LANG_DEFAULT_CONFIG], [AC_PROVIDE_IFELSE([AC_PROG_CXX], [LT_LANG(CXX)], [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) AC_PROVIDE_IFELSE([AC_PROG_F77], [LT_LANG(F77)], [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) AC_PROVIDE_IFELSE([AC_PROG_FC], [LT_LANG(FC)], [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal dnl pulling things in needlessly. AC_PROVIDE_IFELSE([AC_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([LT_PROG_GCJ], [LT_LANG(GCJ)], [m4_ifdef([AC_PROG_GCJ], [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([A][M_PROG_GCJ], [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([LT_PROG_GCJ], [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) AC_PROVIDE_IFELSE([LT_PROG_RC], [LT_LANG(RC)], [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) ])# _LT_LANG_DEFAULT_CONFIG # Obsolete macros: AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_CXX], []) dnl AC_DEFUN([AC_LIBTOOL_F77], []) dnl AC_DEFUN([AC_LIBTOOL_FC], []) dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) dnl AC_DEFUN([AC_LIBTOOL_RC], []) # _LT_TAG_COMPILER # ---------------- m4_defun([_LT_TAG_COMPILER], [AC_REQUIRE([AC_PROG_CC])dnl _LT_DECL([LTCC], [CC], [1], [A C compiler])dnl _LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl _LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl _LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC ])# _LT_TAG_COMPILER # _LT_COMPILER_BOILERPLATE # ------------------------ # Check for compiler boilerplate output or warnings with # the simple compiler test code. m4_defun([_LT_COMPILER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ])# _LT_COMPILER_BOILERPLATE # _LT_LINKER_BOILERPLATE # ---------------------- # Check for linker boilerplate output or warnings with # the simple link test code. m4_defun([_LT_LINKER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* ])# _LT_LINKER_BOILERPLATE # _LT_REQUIRED_DARWIN_CHECKS # ------------------------- m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ case $host_os in rhapsody* | darwin*) AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) AC_CHECK_TOOL([LIPO], [lipo], [:]) AC_CHECK_TOOL([OTOOL], [otool], [:]) AC_CHECK_TOOL([OTOOL64], [otool64], [:]) _LT_DECL([], [DSYMUTIL], [1], [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) _LT_DECL([], [NMEDIT], [1], [Tool to change global to local symbols on Mac OS X]) _LT_DECL([], [LIPO], [1], [Tool to manipulate fat objects and archives on Mac OS X]) _LT_DECL([], [OTOOL], [1], [ldd/readelf like tool for Mach-O binaries on Mac OS X]) _LT_DECL([], [OTOOL64], [1], [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], [lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&AS_MESSAGE_LOG_FD fi rm -rf libconftest.dylib* rm -f conftest.* fi]) AC_CACHE_CHECK([for -exported_symbols_list linker flag], [lt_cv_ld_exported_symbols_list], [lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [lt_cv_ld_exported_symbols_list=yes], [lt_cv_ld_exported_symbols_list=no]) LDFLAGS="$save_LDFLAGS" ]) AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], [lt_cv_ld_force_load=no cat > conftest.c << _LT_EOF int forced_loaded() { return 2;} _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD cat > conftest.c << _LT_EOF int main() { return 0;} _LT_EOF echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err _lt_result=$? if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then lt_cv_ld_force_load=yes else cat conftest.err >&AS_MESSAGE_LOG_FD fi rm -f conftest.err libconftest.a conftest conftest.c rm -rf conftest.dSYM ]) case $host_os in rhapsody* | darwin1.[[012]]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[[012]]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac ]) # _LT_DARWIN_LINKER_FEATURES # -------------------------- # Checks for linker and compiler features on darwin m4_defun([_LT_DARWIN_LINKER_FEATURES], [ m4_require([_LT_REQUIRED_DARWIN_CHECKS]) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported if test "$lt_cv_ld_force_load" = "yes"; then _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else _LT_TAGVAR(whole_archive_flag_spec, $1)='' fi _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=func_echo_all _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" m4_if([$1], [CXX], [ if test "$lt_cv_apple_cc_single_mod" != "yes"; then _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" fi ],[]) else _LT_TAGVAR(ld_shlibs, $1)=no fi ]) # _LT_SYS_MODULE_PATH_AIX([TAGNAME]) # ---------------------------------- # Links a minimal program and checks the executable # for the system default hardcoded library path. In most cases, # this is /usr/lib:/lib, but when the MPI compilers are used # the location of the communication and MPI libs are included too. # If we don't find anything, use the default library path according # to the aix ld manual. # Store the results from the different compilers for each TAGNAME. # Allow to override them for all tags through lt_cv_aix_libpath. m4_defun([_LT_SYS_MODULE_PATH_AIX], [m4_require([_LT_DECL_SED])dnl if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ lt_aix_libpath_sed='[ /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }]' _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi],[]) if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" fi ]) aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) fi ])# _LT_SYS_MODULE_PATH_AIX # _LT_SHELL_INIT(ARG) # ------------------- m4_define([_LT_SHELL_INIT], [m4_divert_text([M4SH-INIT], [$1 ])])# _LT_SHELL_INIT # _LT_PROG_ECHO_BACKSLASH # ----------------------- # Find how we can fake an echo command that does not interpret backslash. # In particular, with Autoconf 2.60 or later we add some code to the start # of the generated configure script which will find a shell with a builtin # printf (which we can use as an echo command). m4_defun([_LT_PROG_ECHO_BACKSLASH], [ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO AC_MSG_CHECKING([how to print strings]) # Test print first, because it will be a builtin if present. if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='print -r --' elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='printf %s\n' else # Use this function as a fallback that always works. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $[]1 _LTECHO_EOF' } ECHO='func_fallback_echo' fi # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "$*" } case "$ECHO" in printf*) AC_MSG_RESULT([printf]) ;; print*) AC_MSG_RESULT([print -r]) ;; *) AC_MSG_RESULT([cat]) ;; esac m4_ifdef([_AS_DETECT_SUGGESTED], [_AS_DETECT_SUGGESTED([ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO PATH=/empty FPATH=/empty; export PATH FPATH test "X`printf %s $ECHO`" = "X$ECHO" \ || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) _LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) ])# _LT_PROG_ECHO_BACKSLASH # _LT_WITH_SYSROOT # ---------------- AC_DEFUN([_LT_WITH_SYSROOT], [AC_MSG_CHECKING([for sysroot]) AC_ARG_WITH([sysroot], [ --with-sysroot[=DIR] Search for dependent libraries within DIR (or the compiler's sysroot if not specified).], [], [with_sysroot=no]) dnl lt_sysroot will always be passed unquoted. We quote it here dnl in case the user passed a directory name. lt_sysroot= case ${with_sysroot} in #( yes) if test "$GCC" = yes; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( /*) lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` ;; #( no|'') ;; #( *) AC_MSG_RESULT([${with_sysroot}]) AC_MSG_ERROR([The sysroot must be an absolute path.]) ;; esac AC_MSG_RESULT([${lt_sysroot:-no}]) _LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl [dependent libraries, and in which our libraries should be installed.])]) # _LT_ENABLE_LOCK # --------------- m4_defun([_LT_ENABLE_LOCK], [AC_ARG_ENABLE([libtool-lock], [AS_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_PUSH(C) AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_POP]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; sparc*-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) LD="${LD-ld} -m elf64_sparc" ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks="$enable_libtool_lock" ])# _LT_ENABLE_LOCK # _LT_PROG_AR # ----------- m4_defun([_LT_PROG_AR], [AC_CHECK_TOOLS(AR, [ar], false) : ${AR=ar} : ${AR_FLAGS=cru} _LT_DECL([], [AR], [1], [The archiver]) _LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], [lt_cv_ar_at_file=no AC_COMPILE_IFELSE([AC_LANG_PROGRAM], [echo conftest.$ac_objext > conftest.lst lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' AC_TRY_EVAL([lt_ar_try]) if test "$ac_status" -eq 0; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a AC_TRY_EVAL([lt_ar_try]) if test "$ac_status" -ne 0; then lt_cv_ar_at_file=@ fi fi rm -f conftest.* libconftest.a ]) ]) if test "x$lt_cv_ar_at_file" = xno; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file fi _LT_DECL([], [archiver_list_spec], [1], [How to feed a file listing to the archiver]) ])# _LT_PROG_AR # _LT_CMD_OLD_ARCHIVE # ------------------- m4_defun([_LT_CMD_OLD_ARCHIVE], [_LT_PROG_AR AC_CHECK_TOOL(STRIP, strip, :) test -z "$STRIP" && STRIP=: _LT_DECL([], [STRIP], [1], [A symbol stripping program]) AC_CHECK_TOOL(RANLIB, ranlib, :) test -z "$RANLIB" && RANLIB=: _LT_DECL([], [RANLIB], [1], [Commands used to install an old-style archive]) # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi case $host_os in darwin*) lock_old_archive_extraction=yes ;; *) lock_old_archive_extraction=no ;; esac _LT_DECL([], [old_postinstall_cmds], [2]) _LT_DECL([], [old_postuninstall_cmds], [2]) _LT_TAGDECL([], [old_archive_cmds], [2], [Commands used to build an old-style archive]) _LT_DECL([], [lock_old_archive_extraction], [0], [Whether to use a lock for old archive extraction]) ])# _LT_CMD_OLD_ARCHIVE # _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------------------- # Check whether the given compiler option works AC_DEFUN([_LT_COMPILER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$3" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi fi $RM conftest* ]) if test x"[$]$2" = xyes; then m4_if([$5], , :, [$5]) else m4_if([$6], , :, [$6]) fi ])# _LT_COMPILER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) # _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------- # Check whether the given linker option works AC_DEFUN([_LT_LINKER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $3" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi else $2=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" ]) if test x"[$]$2" = xyes; then m4_if([$4], , :, [$4]) else m4_if([$5], , :, [$5]) fi ])# _LT_LINKER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) # LT_CMD_MAX_LEN #--------------- AC_DEFUN([LT_CMD_MAX_LEN], [AC_REQUIRE([AC_CANONICAL_HOST])dnl # find the maximum length of command line arguments AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; mint*) # On MiNT this can take a long time and run out of memory. lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8 ; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac ]) if test -n $lt_cv_sys_max_cmd_len ; then AC_MSG_RESULT($lt_cv_sys_max_cmd_len) else AC_MSG_RESULT(none) fi max_cmd_len=$lt_cv_sys_max_cmd_len _LT_DECL([], [max_cmd_len], [0], [What is the maximum length of a command?]) ])# LT_CMD_MAX_LEN # Old name: AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) # _LT_HEADER_DLFCN # ---------------- m4_defun([_LT_HEADER_DLFCN], [AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl ])# _LT_HEADER_DLFCN # _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) # ---------------------------------------------------------------- m4_defun([_LT_TRY_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test "$cross_compiling" = yes; then : [$4] else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF [#line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; }] _LT_EOF if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; x$lt_dlneed_uscore) $2 ;; x$lt_dlunknown|x*) $3 ;; esac else : # compilation failed $3 fi fi rm -fr conftest* ])# _LT_TRY_DLOPEN_SELF # LT_SYS_DLOPEN_SELF # ------------------ AC_DEFUN([LT_SYS_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ]) ;; *) AC_CHECK_FUNC([shl_load], [lt_cv_dlopen="shl_load"], [AC_CHECK_LIB([dld], [shl_load], [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], [AC_CHECK_FUNC([dlopen], [lt_cv_dlopen="dlopen"], [AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [AC_CHECK_LIB([svld], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], [AC_CHECK_LIB([dld], [dld_link], [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) ]) ]) ]) ]) ]) ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" AC_CACHE_CHECK([whether a program can dlopen itself], lt_cv_dlopen_self, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ]) if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], lt_cv_dlopen_self_static, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ]) fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi _LT_DECL([dlopen_support], [enable_dlopen], [0], [Whether dlopen is supported]) _LT_DECL([dlopen_self], [enable_dlopen_self], [0], [Whether dlopen of programs is supported]) _LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], [Whether dlopen of statically linked programs is supported]) ])# LT_SYS_DLOPEN_SELF # Old name: AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) # _LT_COMPILER_C_O([TAGNAME]) # --------------------------- # Check to see if options -c and -o are simultaneously supported by compiler. # This macro does not hard code the compiler like AC_PROG_CC_C_O. m4_defun([_LT_COMPILER_C_O], [m4_require([_LT_DECL_SED])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi chmod u+w . 2>&AS_MESSAGE_LOG_FD $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* ]) _LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], [Does compiler simultaneously support -c and -o options?]) ])# _LT_COMPILER_C_O # _LT_COMPILER_FILE_LOCKS([TAGNAME]) # ---------------------------------- # Check to see if we can do hard links to lock some files if needed m4_defun([_LT_COMPILER_FILE_LOCKS], [m4_require([_LT_ENABLE_LOCK])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_COMPILER_C_O([$1]) hard_links="nottested" if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user AC_MSG_CHECKING([if we can lock with hard links]) hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no AC_MSG_RESULT([$hard_links]) if test "$hard_links" = no; then AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) need_locks=warn fi else need_locks=no fi _LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) ])# _LT_COMPILER_FILE_LOCKS # _LT_CHECK_OBJDIR # ---------------- m4_defun([_LT_CHECK_OBJDIR], [AC_CACHE_CHECK([for objdir], [lt_cv_objdir], [rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null]) objdir=$lt_cv_objdir _LT_DECL([], [objdir], [0], [The name of the directory that contains temporary libtool files])dnl m4_pattern_allow([LT_OBJDIR])dnl AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", [Define to the sub-directory in which libtool stores uninstalled libraries.]) ])# _LT_CHECK_OBJDIR # _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) # -------------------------------------- # Check hardcoding attributes. m4_defun([_LT_LINKER_HARDCODE_LIBPATH], [AC_MSG_CHECKING([how to hardcode library paths into programs]) _LT_TAGVAR(hardcode_action, $1)= if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || test -n "$_LT_TAGVAR(runpath_var, $1)" || test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then # We can hardcode non-existent directories. if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then # Linking always hardcodes the temporary library directory. _LT_TAGVAR(hardcode_action, $1)=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. _LT_TAGVAR(hardcode_action, $1)=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. _LT_TAGVAR(hardcode_action, $1)=unsupported fi AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi _LT_TAGDECL([], [hardcode_action], [0], [How to hardcode a shared library path into an executable]) ])# _LT_LINKER_HARDCODE_LIBPATH # _LT_CMD_STRIPLIB # ---------------- m4_defun([_LT_CMD_STRIPLIB], [m4_require([_LT_DECL_EGREP]) striplib= old_striplib= AC_MSG_CHECKING([whether stripping libraries is possible]) if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" AC_MSG_RESULT([yes]) else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) fi ;; *) AC_MSG_RESULT([no]) ;; esac fi _LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) _LT_DECL([], [striplib], [1]) ])# _LT_CMD_STRIPLIB # _LT_SYS_DYNAMIC_LINKER([TAG]) # ----------------------------- # PORTME Fill in your ld.so characteristics m4_defun([_LT_SYS_DYNAMIC_LINKER], [AC_REQUIRE([AC_CANONICAL_HOST])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_OBJDUMP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl AC_MSG_CHECKING([dynamic linker characteristics]) m4_if([$1], [], [ if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac case $host_os in mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; *) lt_sed_strip_eq="s,=/,/,g" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` ;; *) lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` ;; esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[[lt_foo]]++; } if (lt_freq[[lt_foo]] == 1) { print lt_foo; } }'` # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi]) library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[[4-9]]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[[01]] | aix4.[[01]].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[[45]]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' library_names_spec='${libname}.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec="$LIB" if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[[123]]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[[01]]* | freebsdelf3.[[01]]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; haiku*) version_type=linux need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=yes sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[[3-9]]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], [lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], [lt_cv_shlibpath_overrides_runpath=yes])]) LDFLAGS=$save_LDFLAGS libdir=$save_libdir ]) shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[[89]] | openbsd2.[[89]].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac AC_MSG_RESULT([$dynamic_linker]) test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi _LT_DECL([], [variables_saved_for_relink], [1], [Variables whose values should be saved in libtool wrapper scripts and restored at link time]) _LT_DECL([], [need_lib_prefix], [0], [Do we need the "lib" prefix for modules?]) _LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) _LT_DECL([], [version_type], [0], [Library versioning type]) _LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) _LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) _LT_DECL([], [shlibpath_overrides_runpath], [0], [Is shlibpath searched before the hard-coded library search path?]) _LT_DECL([], [libname_spec], [1], [Format of library name prefix]) _LT_DECL([], [library_names_spec], [1], [[List of archive names. First name is the real one, the rest are links. The last name is the one that the linker finds with -lNAME]]) _LT_DECL([], [soname_spec], [1], [[The coded name of the library, if different from the real name]]) _LT_DECL([], [install_override_mode], [1], [Permission mode override for installation of shared libraries]) _LT_DECL([], [postinstall_cmds], [2], [Command to use after installation of a shared archive]) _LT_DECL([], [postuninstall_cmds], [2], [Command to use after uninstallation of a shared archive]) _LT_DECL([], [finish_cmds], [2], [Commands used to finish a libtool library installation in a directory]) _LT_DECL([], [finish_eval], [1], [[As "finish_cmds", except a single script fragment to be evaled but not shown]]) _LT_DECL([], [hardcode_into_libs], [0], [Whether we should hardcode library paths into libraries]) _LT_DECL([], [sys_lib_search_path_spec], [2], [Compile-time system search path for libraries]) _LT_DECL([], [sys_lib_dlsearch_path_spec], [2], [Run-time system search path for libraries]) ])# _LT_SYS_DYNAMIC_LINKER # _LT_PATH_TOOL_PREFIX(TOOL) # -------------------------- # find a file program which can recognize shared library AC_DEFUN([_LT_PATH_TOOL_PREFIX], [m4_require([_LT_DECL_EGREP])dnl AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in [[\\/*] | ?:[\\/]*]) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="m4_if([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$1; then lt_cv_path_MAGIC_CMD="$ac_dir/$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac]) MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi _LT_DECL([], [MAGIC_CMD], [0], [Used to examine libraries when file_magic_cmd begins with "file"])dnl ])# _LT_PATH_TOOL_PREFIX # Old name: AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) # _LT_PATH_MAGIC # -------------- # find a file program which can recognize a shared library m4_defun([_LT_PATH_MAGIC], [_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) else MAGIC_CMD=: fi fi ])# _LT_PATH_MAGIC # LT_PATH_LD # ---------- # find the pathname to the GNU or non-GNU linker AC_DEFUN([LT_PATH_LD], [AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_PROG_ECHO_BACKSLASH])dnl AC_ARG_WITH([gnu-ld], [AS_HELP_STRING([--with-gnu-ld], [assume the C compiler uses GNU ld @<:@default=no@:>@])], [test "$withval" = no || with_gnu_ld=yes], [with_gnu_ld=no])dnl ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by $CC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]]* | ?:[[\\/]]*) re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else # Keep this pattern in sync with the one in func_win32_libid. lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc*) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; haiku*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[[3-9]]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; esac ]) file_magic_glob= want_nocaseglob=no if test "$build" = "$host"; then case $host_os in mingw* | pw32*) if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then want_nocaseglob=yes else file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` fi ;; esac fi file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown _LT_DECL([], [deplibs_check_method], [1], [Method to check whether dependent libraries are shared objects]) _LT_DECL([], [file_magic_cmd], [1], [Command to use when deplibs_check_method = "file_magic"]) _LT_DECL([], [file_magic_glob], [1], [How to find potential files when deplibs_check_method = "file_magic"]) _LT_DECL([], [want_nocaseglob], [1], [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) ])# _LT_CHECK_MAGIC_METHOD # LT_PATH_NM # ---------- # find the pathname to a BSD- or MS-compatible name lister AC_DEFUN([LT_PATH_NM], [AC_REQUIRE([AC_PROG_CC])dnl AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done : ${lt_cv_path_NM=no} fi]) if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : # Let the user override the test. else AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in *COFF*) DUMPBIN="$DUMPBIN -symbols" ;; *) DUMPBIN=: ;; esac fi AC_SUBST([DUMPBIN]) if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" fi fi test -z "$NM" && NM=nm AC_SUBST([NM]) _LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], [lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) cat conftest.out >&AS_MESSAGE_LOG_FD if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest*]) ])# LT_PATH_NM # Old names: AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_PROG_NM], []) dnl AC_DEFUN([AC_PROG_NM], []) # _LT_CHECK_SHAREDLIB_FROM_LINKLIB # -------------------------------- # how to determine the name of the shared library # associated with a specific link library. # -- PORTME fill in with the dynamic library characteristics m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], [m4_require([_LT_DECL_EGREP]) m4_require([_LT_DECL_OBJDUMP]) m4_require([_LT_DECL_DLLTOOL]) AC_CACHE_CHECK([how to associate runtime and link libraries], lt_cv_sharedlib_from_linklib_cmd, [lt_cv_sharedlib_from_linklib_cmd='unknown' case $host_os in cygwin* | mingw* | pw32* | cegcc*) # two different shell functions defined in ltmain.sh # decide which to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ;; *) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ;; esac ;; *) # fallback: assume linklib IS sharedlib lt_cv_sharedlib_from_linklib_cmd="$ECHO" ;; esac ]) sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO _LT_DECL([], [sharedlib_from_linklib_cmd], [1], [Command to associate shared and link libraries]) ])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB # _LT_PATH_MANIFEST_TOOL # ---------------------- # locate the manifest tool m4_defun([_LT_PATH_MANIFEST_TOOL], [AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], [lt_cv_path_mainfest_tool=no echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out cat conftest.err >&AS_MESSAGE_LOG_FD if $GREP 'Manifest Tool' conftest.out > /dev/null; then lt_cv_path_mainfest_tool=yes fi rm -f conftest*]) if test "x$lt_cv_path_mainfest_tool" != xyes; then MANIFEST_TOOL=: fi _LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl ])# _LT_PATH_MANIFEST_TOOL # LT_LIB_M # -------- # check for math library AC_DEFUN([LT_LIB_M], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, cos, LIBM="-lm") ;; esac AC_SUBST([LIBM]) ])# LT_LIB_M # Old name: AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_CHECK_LIBM], []) # _LT_COMPILER_NO_RTTI([TAGNAME]) # ------------------------------- m4_defun([_LT_COMPILER_NO_RTTI], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= if test "$GCC" = yes; then case $cc_basename in nvcc*) _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; *) _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; esac _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], lt_cv_prog_compiler_rtti_exceptions, [-fno-rtti -fno-exceptions], [], [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) fi _LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], [Compiler flag to turn off builtin functions]) ])# _LT_COMPILER_NO_RTTI # _LT_CMD_GLOBAL_SYMBOLS # ---------------------- m4_defun([_LT_CMD_GLOBAL_SYMBOLS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([LT_PATH_NM])dnl AC_REQUIRE([LT_PATH_LD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_TAG_COMPILER])dnl # Check for command to grab the raw symbol name followed by C symbol from nm. AC_MSG_CHECKING([command to parse $NM output from $compiler object]) AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [ # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[[BCDEGRST]]' # Regexp to match symbols that can be accessed directly from C. sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[[BCDT]]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[[ABCDGISTW]]' ;; hpux*) if test "$host_cpu" = ia64; then symcode='[[ABCDEGRST]]' fi ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; osf*) symcode='[[BCDEGQRST]]' ;; solaris*) symcode='[[BDRT]]' ;; sco3.2v5*) symcode='[[DT]]' ;; sysv4.2uw2*) symcode='[[DT]]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[[ABDT]]' ;; sysv4) symcode='[[DFNSTU]]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[[ABCDGIRSTW]]' ;; esac # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function # and D for any global variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK ['"\ " {last_section=section; section=\$ 3};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ " {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ " s[1]~/^[@?]/{print s[1], s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx]" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if AC_TRY_EVAL(ac_compile); then # Now try to grab the symbols. nlist=conftest.nm if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT@&t@_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT@&t@_DLSYM_CONST #else # define LT@&t@_DLSYM_CONST const #endif #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ LT@&t@_DLSYM_CONST struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[[]] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD fi else echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done ]) if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then AC_MSG_RESULT(failed) else AC_MSG_RESULT(ok) fi # Response file support. if test "$lt_cv_nm_interface" = "MS dumpbin"; then nm_file_list_spec='@' elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then nm_file_list_spec='@' fi _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], [Take the output of nm and produce a listing of raw symbols and C names]) _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], [Transform the output of nm in a proper C declaration]) _LT_DECL([global_symbol_to_c_name_address], [lt_cv_sys_global_symbol_to_c_name_address], [1], [Transform the output of nm in a C name address pair]) _LT_DECL([global_symbol_to_c_name_address_lib_prefix], [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], [Transform the output of nm in a C name address pair when lib prefix is needed]) _LT_DECL([], [nm_file_list_spec], [1], [Specify filename containing input files for $NM]) ]) # _LT_CMD_GLOBAL_SYMBOLS # _LT_COMPILER_PIC([TAGNAME]) # --------------------------- m4_defun([_LT_COMPILER_PIC], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_wl, $1)= _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)= m4_if([$1], [CXX], [ # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. _LT_TAGVAR(lt_prog_compiler_static, $1)= ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else case $host_os in aix[[4-9]]*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; dgux*) case $cc_basename in ec++*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; ghcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; aCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in KCC*) # KAI C++ Compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; ecpc* ) # old Intel C++ for x86_64 which still supported -KPIC. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; icpc* ) # Intel C++, used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; pgCC* | pgcpp*) # Portland Group C++ compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL 8.0, 9.0 on PPC and BlueGene _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ;; *) ;; esac ;; netbsd* | netbsdelf*-gnu) ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; cxx*) # Digital/Compaq C++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; lcc*) # Lucid _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; *) ;; esac ;; vxworks*) ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ], [ if test "$GCC" = yes; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. _LT_TAGVAR(lt_prog_compiler_static, $1)= ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac case $cc_basename in nvcc*) # Cuda Compiler Driver 2.2 _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Xcompiler -fPIC' ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; hpux9* | hpux10* | hpux11*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC (with -KPIC) is the default. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # Lahey Fortran 8.1. lf95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' ;; nagfor*) # NAG Fortran compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; ccc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All Alpha code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xl* | bgxl* | bgf* | mpixl*) # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ F* | *Sun*Fortran*) # Sun Fortran 8.3 passes all unrecognized flags to the linker _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='' ;; *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; esac ;; esac ;; newsos6) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All OSF/1 code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; rdos*) _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; solaris*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' case $cc_basename in f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; *) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; esac ;; sunos4*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; unicos*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; uts4*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ]) case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" ;; esac AC_CACHE_CHECK([for $compiler option to produce PIC], [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) _LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) # # Check to make sure the PIC flag actually works. # if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in "" | " "*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; esac], [_LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) fi _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], [Additional compiler flags for building library objects]) _LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], [How to pass a linker flag through the compiler]) # # Check to make sure the static flag actually works. # wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" _LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), $lt_tmp_static_flag, [], [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) _LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], [Compiler flag to prevent dynamic linking]) ])# _LT_COMPILER_PIC # _LT_LINKER_SHLIBS([TAGNAME]) # ---------------------------- # See if the linker supports building shared libraries. m4_defun([_LT_LINKER_SHLIBS], [AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl m4_require([_LT_PATH_MANIFEST_TOOL])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) m4_if([$1], [CXX], [ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] case $host_os in aix[[4-9]]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global defined # symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ;; cygwin* | mingw* | cegcc*) case $cc_basename in cl*) ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] ;; esac ;; linux* | k*bsd*-gnu | gnu*) _LT_TAGVAR(link_all_deplibs, $1)=no ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac ], [ runpath_var= _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_cmds, $1)= _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(old_archive_from_new_cmds, $1)= _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= _LT_TAGVAR(thread_safe_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list _LT_TAGVAR(include_expsyms, $1)= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. dnl Note also adjust exclude_expsyms for C++ above. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; linux* | k*bsd*-gnu | gnu*) _LT_TAGVAR(link_all_deplibs, $1)=no ;; esac _LT_TAGVAR(ld_shlibs, $1)=yes # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility # with the native linker. However, as the warning in the GNU ld # block says, versions before 2.19.5* couldn't really create working # shared libraries, regardless of the interface used. case `$LD -v 2>&1` in *\ \(GNU\ Binutils\)\ 2.19.5*) ;; *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; *) lt_use_gnu_ld_interface=yes ;; esac ;; *) lt_use_gnu_ld_interface=yes ;; esac fi if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi supports_anon_versioning=no case `$LD -v 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[[3-9]]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.19, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to install binutils *** 2.20 or above, or modify your PATH so that a non-GNU linker is found. *** You will then need to restart the configuration process. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 _LT_TAGVAR(whole_archive_flag_spec, $1)= tmp_sharedflag='--shared' ;; xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi case $cc_basename in xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; sunos4*) _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then runpath_var= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. _LT_TAGVAR(hardcode_minus_L, $1)=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. _LT_TAGVAR(hardcode_direct, $1)=unsupported fi ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global # defined symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' if test "$GCC" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi _LT_TAGVAR(link_all_deplibs, $1)=no else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; bsdi[[45]]*) _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in cl*) # Native MSVC _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(file_list_spec, $1)='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # Assume MSVC wrapper _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' # FIXME: Should let the user specify the lib program. _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; esac ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; dgux*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; freebsd1*) _LT_TAGVAR(ld_shlibs, $1)=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; hpux9*) if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; hpux10*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes fi ;; hpux11*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) m4_if($1, [], [ # Older versions of the 11.00 compiler do not understand -b yet # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) _LT_LINKER_OPTION([if $CC understands -b], _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) ;; esac fi if test "$with_gnu_ld" = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. # This should be the same for all languages, so no per-tag cache variable. AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], [lt_cv_irix_exported_symbol], [save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" AC_LINK_IFELSE( [AC_LANG_SOURCE( [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], [C++], [[int foo (void) { return 0; }]], [Fortran 77], [[ subroutine foo end]], [Fortran], [[ subroutine foo end]])])], [lt_cv_irix_exported_symbol=yes], [lt_cv_irix_exported_symbol=no]) LDFLAGS="$save_LDFLAGS"]) if test "$lt_cv_irix_exported_symbol" = yes; then _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' fi else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes _LT_TAGVAR(link_all_deplibs, $1)=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; newsos6) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *nto* | *qnx*) ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' else case $host_os in openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ;; esac fi else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; os2*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; solaris*) _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='${wl}' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' fi ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4) case $host_vendor in sni) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' _LT_TAGVAR(hardcode_direct, $1)=no ;; motorola) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4.3*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes _LT_TAGVAR(ld_shlibs, $1)=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(ld_shlibs, $1)=no ;; esac if test x$host_vendor = xsni; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' ;; esac fi fi ]) AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld _LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl _LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl _LT_DECL([], [extract_expsyms_cmds], [2], [The commands to extract the exported symbol list from a shared archive]) # # Do we need to explicitly link libc? # case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in x|xyes) # Assume -lc should be added _LT_TAGVAR(archive_cmds_need_lc, $1)=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $_LT_TAGVAR(archive_cmds, $1) in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. AC_CACHE_CHECK([whether -lc should be explicitly linked in], [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), [$RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if AC_TRY_EVAL(ac_compile) 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) _LT_TAGVAR(allow_undefined_flag, $1)= if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) then lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no else lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes fi _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* ]) _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) ;; esac fi ;; esac _LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], [Whether or not to add -lc for building shared libraries]) _LT_TAGDECL([allow_libtool_libs_with_static_runtimes], [enable_shared_with_static_runtimes], [0], [Whether or not to disallow shared libs when runtime libs are static]) _LT_TAGDECL([], [export_dynamic_flag_spec], [1], [Compiler flag to allow reflexive dlopens]) _LT_TAGDECL([], [whole_archive_flag_spec], [1], [Compiler flag to generate shared objects directly from archives]) _LT_TAGDECL([], [compiler_needs_object], [1], [Whether the compiler copes with passing no objects directly]) _LT_TAGDECL([], [old_archive_from_new_cmds], [2], [Create an old-style archive from a shared archive]) _LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], [Create a temporary old-style archive to link instead of a shared archive]) _LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) _LT_TAGDECL([], [archive_expsym_cmds], [2]) _LT_TAGDECL([], [module_cmds], [2], [Commands used to build a loadable module if different from building a shared archive.]) _LT_TAGDECL([], [module_expsym_cmds], [2]) _LT_TAGDECL([], [with_gnu_ld], [1], [Whether we are building with GNU ld or not]) _LT_TAGDECL([], [allow_undefined_flag], [1], [Flag that allows shared libraries with undefined symbols to be built]) _LT_TAGDECL([], [no_undefined_flag], [1], [Flag that enforces no undefined symbols]) _LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], [Flag to hardcode $libdir into a binary during linking. This must work even if $libdir does not exist]) _LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], [[If ld is used when linking, flag to hardcode $libdir into a binary during linking. This must work even if $libdir does not exist]]) _LT_TAGDECL([], [hardcode_libdir_separator], [1], [Whether we need a single "-rpath" flag with a separated argument]) _LT_TAGDECL([], [hardcode_direct], [0], [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_direct_absolute], [0], [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the resulting binary and the resulting library dependency is "absolute", i.e impossible to change by setting ${shlibpath_var} if the library is relocated]) _LT_TAGDECL([], [hardcode_minus_L], [0], [Set to "yes" if using the -LDIR flag during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_shlibpath_var], [0], [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_automatic], [0], [Set to "yes" if building a shared library automatically hardcodes DIR into the library and all subsequent libraries and executables linked against it]) _LT_TAGDECL([], [inherit_rpath], [0], [Set to yes if linker adds runtime paths of dependent libraries to runtime path list]) _LT_TAGDECL([], [link_all_deplibs], [0], [Whether libtool must link a program against all its dependency libraries]) _LT_TAGDECL([], [always_export_symbols], [0], [Set to "yes" if exported symbols are required]) _LT_TAGDECL([], [export_symbols_cmds], [2], [The commands to list exported symbols]) _LT_TAGDECL([], [exclude_expsyms], [1], [Symbols that should not be listed in the preloaded symbols]) _LT_TAGDECL([], [include_expsyms], [1], [Symbols that must always be exported]) _LT_TAGDECL([], [prelink_cmds], [2], [Commands necessary for linking programs (against libraries) with templates]) _LT_TAGDECL([], [postlink_cmds], [2], [Commands necessary for finishing linking programs]) _LT_TAGDECL([], [file_list_spec], [1], [Specify filename containing input files]) dnl FIXME: Not yet implemented dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], dnl [Compiler flag to generate thread safe objects]) ])# _LT_LINKER_SHLIBS # _LT_LANG_C_CONFIG([TAG]) # ------------------------ # Ensure that the configuration variables for a C compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to `libtool'. m4_defun([_LT_LANG_C_CONFIG], [m4_require([_LT_DECL_EGREP])dnl lt_save_CC="$CC" AC_LANG_PUSH(C) # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' _LT_TAG_COMPILER # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) LT_SYS_DLOPEN_SELF _LT_CMD_STRIPLIB # Report which library types will actually be built AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_CONFIG($1) fi AC_LANG_POP CC="$lt_save_CC" ])# _LT_LANG_C_CONFIG # _LT_LANG_CXX_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a C++ compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to `libtool'. m4_defun([_LT_LANG_CXX_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_PATH_MANIFEST_TOOL])dnl if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then AC_PROG_CXXCPP else _lt_caught_CXX_error=yes fi AC_LANG_PUSH(C++) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the CXX compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_caught_CXX_error" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} CFLAGS=$CXXFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then # We don't want -fno-exception when compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' else _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration LT_PATH_LD # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) _LT_TAGVAR(ld_shlibs, $1)=yes case $host_os in aix3*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' if test "$GXX" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to # export. _LT_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty # executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared # libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; cygwin* | mingw* | pw32* | cegcc*) case $GXX,$cc_basename in ,cl* | no,cl*) # Native MSVC # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(file_list_spec, $1)='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ func_to_tool_file "$lt_outputfile"~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # g++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; freebsd[[12]]*) # C++ shared libraries reported to be fairly broken before # switch to ELF _LT_TAGVAR(ld_shlibs, $1)=no ;; freebsd-elf*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions _LT_TAGVAR(ld_shlibs, $1)=yes ;; gnu*) ;; haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; hpux9*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) ;; *) _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' fi fi _LT_TAGVAR(link_all_deplibs, $1)=yes ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc* | ecpc* ) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; esac _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ $RANLIB $oldlib' _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; *) # Version 6 and above use weak symbols _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' ;; xl* | mpixl* | bgxl*) # IBM XL 8.0 on PPC, with GNU ld _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; m88k*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; *nto* | *qnx*) _LT_TAGVAR(ld_shlibs, $1)=yes ;; openbsd2*) # C++ shared libraries are fairly broken _LT_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi output_verbose_link_cmd=func_echo_all else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # the KAI C++ compiler. case $host in osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; esac ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; cxx*) case $host in osf3*) _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ;; *) _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ $RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ;; esac _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' case $host in osf3*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ '"$_LT_TAGVAR(old_archive_cmds, $1)" _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ '"$_LT_TAGVAR(reload_cmds, $1)" ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_TAGVAR(GCC, $1)="$GXX" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld fi # test "$_lt_caught_CXX_error" != yes AC_LANG_POP ])# _LT_LANG_CXX_CONFIG # _LT_FUNC_STRIPNAME_CNF # ---------------------- # func_stripname_cnf prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # # This function is identical to the (non-XSI) version of func_stripname, # except this one can be used by m4 code that may be executed by configure, # rather than the libtool script. m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl AC_REQUIRE([_LT_DECL_SED]) AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) func_stripname_cnf () { case ${2} in .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; esac } # func_stripname_cnf ])# _LT_FUNC_STRIPNAME_CNF # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) # --------------------------------- # Figure out "hidden" library dependencies from verbose # compiler output when linking a shared library. # Parse the compiler output and extract the necessary # objects, libraries and library flags. m4_defun([_LT_SYS_HIDDEN_LIBDEPS], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl # Dependencies to place before and after the object being linked: _LT_TAGVAR(predep_objects, $1)= _LT_TAGVAR(postdep_objects, $1)= _LT_TAGVAR(predeps, $1)= _LT_TAGVAR(postdeps, $1)= _LT_TAGVAR(compiler_lib_search_path, $1)= dnl we can't use the lt_simple_compile_test_code here, dnl because it contains code intended for an executable, dnl not a library. It's possible we should let each dnl tag define a new lt_????_link_test_code variable, dnl but it's only used here... m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF int a; void foo (void) { a = 0; } _LT_EOF ], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF class Foo { public: Foo (void) { a = 0; } private: int a; }; _LT_EOF ], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer*4 a a=0 return end _LT_EOF ], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer a a=0 return end _LT_EOF ], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF public class foo { private int a; public void bar (void) { a = 0; } }; _LT_EOF ]) _lt_libdeps_save_CFLAGS=$CFLAGS case "$CC $CFLAGS " in #( *\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; *\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; esac dnl Parse the compiler output and extract the necessary dnl objects, libraries and library flags. if AC_TRY_EVAL(ac_compile); then # Parse the compiler output and extract the necessary # objects, libraries and library flags. # Sentinel used to keep track of whether or not we are before # the conftest object file. pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do case ${prev}${p} in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. if test $p = "-L" || test $p = "-R"; then prev=$p continue fi # Expand the sysroot to ease extracting the directories later. if test -z "$prev"; then case $p in -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; esac fi case $p in =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; esac if test "$pre_test_object_deps_done" = no; then case ${prev} in -L | -R) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" else _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" fi ;; # The "-l" case would never come before the object being # linked, so don't bother handling this case. esac else if test -z "$_LT_TAGVAR(postdeps, $1)"; then _LT_TAGVAR(postdeps, $1)="${prev}${p}" else _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" fi fi prev= ;; *.lto.$objext) ;; # Ignore GCC LTO objects *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then pre_test_object_deps_done=yes continue fi if test "$pre_test_object_deps_done" = no; then if test -z "$_LT_TAGVAR(predep_objects, $1)"; then _LT_TAGVAR(predep_objects, $1)="$p" else _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" fi else if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then _LT_TAGVAR(postdep_objects, $1)="$p" else _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" fi fi ;; *) ;; # Ignore the rest. esac done # Clean up. rm -f a.out a.exe else echo "libtool.m4: error: problem compiling $1 test program" fi $RM -f confest.$objext CFLAGS=$_lt_libdeps_save_CFLAGS # PORTME: override above test on systems where it is broken m4_if([$1], [CXX], [case $host_os in interix[[3-9]]*) # Interix 3.5 installs completely hosed .la files for C++, so rather than # hack all around it, let's just trust "g++" to DTRT. _LT_TAGVAR(predep_objects,$1)= _LT_TAGVAR(postdep_objects,$1)= _LT_TAGVAR(postdeps,$1)= ;; linux*) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac if test "$solaris_use_stlport4" != yes; then _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac # Adding this requires a known-good setup of shared libraries for # Sun compiler versions before 5.6, else PIC objects from an old # archive will be linked into the output, leading to subtle bugs. if test "$solaris_use_stlport4" != yes; then _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; esac ]) case " $_LT_TAGVAR(postdeps, $1) " in *" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; esac _LT_TAGVAR(compiler_lib_search_dirs, $1)= if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` fi _LT_TAGDECL([], [compiler_lib_search_dirs], [1], [The directories searched by this compiler when creating a shared library]) _LT_TAGDECL([], [predep_objects], [1], [Dependencies to place before and after the objects being linked to create a shared library]) _LT_TAGDECL([], [postdep_objects], [1]) _LT_TAGDECL([], [predeps], [1]) _LT_TAGDECL([], [postdeps], [1]) _LT_TAGDECL([], [compiler_lib_search_path], [1], [The library search path used internally by the compiler when linking a shared library]) ])# _LT_SYS_HIDDEN_LIBDEPS # _LT_LANG_F77_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a Fortran 77 compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_F77_CONFIG], [AC_LANG_PUSH(Fortran 77) if test -z "$F77" || test "X$F77" = "Xno"; then _lt_disable_F77=yes fi _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for f77 test sources. ac_ext=f # Object file extension for compiled f77 test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the F77 compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_disable_F77" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${F77-"f77"} CFLAGS=$FFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) GCC=$G77 if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)="$G77" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC="$lt_save_CC" CFLAGS="$lt_save_CFLAGS" fi # test "$_lt_disable_F77" != yes AC_LANG_POP ])# _LT_LANG_F77_CONFIG # _LT_LANG_FC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for a Fortran compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_FC_CONFIG], [AC_LANG_PUSH(Fortran) if test -z "$FC" || test "X$FC" = "Xno"; then _lt_disable_FC=yes fi _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for fc test sources. ac_ext=${ac_fc_srcext-f} # Object file extension for compiled fc test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the FC compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_disable_FC" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${FC-"f95"} CFLAGS=$FCFLAGS compiler=$CC GCC=$ac_cv_fc_compiler_gnu _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS fi # test "$_lt_disable_FC" != yes AC_LANG_POP ])# _LT_LANG_FC_CONFIG # _LT_LANG_GCJ_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for the GNU Java Compiler compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_GCJ_CONFIG], [AC_REQUIRE([LT_PROG_GCJ])dnl AC_LANG_SAVE # Source file extension for Java test sources. ac_ext=java # Object file extension for compiled Java test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="class foo {}" # Code to be used in simple link tests lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC=yes CC=${GCJ-"gcj"} CFLAGS=$GCJFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_TAGVAR(LD, $1)="$LD" _LT_CC_BASENAME([$compiler]) # GCJ did not exist at the time GCC didn't implicitly link libc in. _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi AC_LANG_RESTORE GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_GCJ_CONFIG # _LT_LANG_RC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for the Windows resource compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_RC_CONFIG], [AC_REQUIRE([LT_PROG_RC])dnl AC_LANG_SAVE # Source file extension for RC test sources. ac_ext=rc # Object file extension for compiled RC test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' # Code to be used in simple link tests lt_simple_link_test_code="$lt_simple_compile_test_code" # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC= CC=${RC-"windres"} CFLAGS= compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes if test -n "$compiler"; then : _LT_CONFIG($1) fi GCC=$lt_save_GCC AC_LANG_RESTORE CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_RC_CONFIG # LT_PROG_GCJ # ----------- AC_DEFUN([LT_PROG_GCJ], [m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj,) test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS)])])[]dnl ]) # Old name: AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_GCJ], []) # LT_PROG_RC # ---------- AC_DEFUN([LT_PROG_RC], [AC_CHECK_TOOL(RC, windres,) ]) # Old name: AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_RC], []) # _LT_DECL_EGREP # -------------- # If we don't have a new enough Autoconf to choose the best grep # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_EGREP], [AC_REQUIRE([AC_PROG_EGREP])dnl AC_REQUIRE([AC_PROG_FGREP])dnl test -z "$GREP" && GREP=grep _LT_DECL([], [GREP], [1], [A grep program that handles long lines]) _LT_DECL([], [EGREP], [1], [An ERE matcher]) _LT_DECL([], [FGREP], [1], [A literal string matcher]) dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too AC_SUBST([GREP]) ]) # _LT_DECL_OBJDUMP # -------------- # If we don't have a new enough Autoconf to choose the best objdump # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_OBJDUMP], [AC_CHECK_TOOL(OBJDUMP, objdump, false) test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) AC_SUBST([OBJDUMP]) ]) # _LT_DECL_DLLTOOL # ---------------- # Ensure DLLTOOL variable is set. m4_defun([_LT_DECL_DLLTOOL], [AC_CHECK_TOOL(DLLTOOL, dlltool, false) test -z "$DLLTOOL" && DLLTOOL=dlltool _LT_DECL([], [DLLTOOL], [1], [DLL creation program]) AC_SUBST([DLLTOOL]) ]) # _LT_DECL_SED # ------------ # Check for a fully-functional sed program, that truncates # as few characters as possible. Prefer GNU sed if found. m4_defun([_LT_DECL_SED], [AC_PROG_SED test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" _LT_DECL([], [SED], [1], [A sed program that does not truncate output]) _LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], [Sed that helps us avoid accidentally triggering echo(1) options like -n]) ])# _LT_DECL_SED m4_ifndef([AC_PROG_SED], [ # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_SED. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # m4_defun([AC_PROG_SED], [AC_MSG_CHECKING([for a sed that does not truncate output]) AC_CACHE_VAL(lt_cv_path_SED, [# Loop through the user's path and test for sed and gsed. # Then use that list of sed's as ones to test for truncation. as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for lt_ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" fi done done done IFS=$as_save_IFS lt_ac_max=0 lt_ac_count=0 # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do test ! -f $lt_ac_sed && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in # Check for GNU sed and select it if it is found. if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then lt_cv_path_SED=$lt_ac_sed break fi while true; do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo >>conftest.nl $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break cmp -s conftest.out conftest.nl || break # 10000 chars as input seems more than enough test $lt_ac_count -gt 10 && break lt_ac_count=`expr $lt_ac_count + 1` if test $lt_ac_count -gt $lt_ac_max; then lt_ac_max=$lt_ac_count lt_cv_path_SED=$lt_ac_sed fi done done ]) SED=$lt_cv_path_SED AC_SUBST([SED]) AC_MSG_RESULT([$SED]) ])#AC_PROG_SED ])#m4_ifndef # Old name: AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_SED], []) # _LT_CHECK_SHELL_FEATURES # ------------------------ # Find out whether the shell is Bourne or XSI compatible, # or has some other useful features. m4_defun([_LT_CHECK_SHELL_FEATURES], [AC_MSG_CHECKING([whether the shell understands some XSI constructs]) # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ = c,a/b,b/c, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes AC_MSG_RESULT([$xsi_shell]) _LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) AC_MSG_CHECKING([whether the shell understands "+="]) lt_shell_append=no ( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes AC_MSG_RESULT([$lt_shell_append]) _LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi _LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac _LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl _LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl ])# _LT_CHECK_SHELL_FEATURES # _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) # ------------------------------------------------------ # In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and # '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. m4_defun([_LT_PROG_FUNCTION_REPLACE], [dnl { sed -e '/^$1 ()$/,/^} # $1 /c\ $1 ()\ {\ m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) } # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: ]) # _LT_PROG_REPLACE_SHELLFNS # ------------------------- # Replace existing portable implementations of several shell functions with # equivalent extended shell implementations where those features are available.. m4_defun([_LT_PROG_REPLACE_SHELLFNS], [if test x"$xsi_shell" = xyes; then _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac]) _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl func_basename_result="${1##*/}"]) _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac func_basename_result="${1##*/}"]) _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are # positional parameters, so assign one to ordinary parameter first. func_stripname_result=${3} func_stripname_result=${func_stripname_result#"${1}"} func_stripname_result=${func_stripname_result%"${2}"}]) _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl func_split_long_opt_name=${1%%=*} func_split_long_opt_arg=${1#*=}]) _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl func_split_short_opt_arg=${1#??} func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl case ${1} in *.lo) func_lo2o_result=${1%.lo}.${objext} ;; *) func_lo2o_result=${1} ;; esac]) _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) fi if test x"$lt_shell_append" = xyes; then _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl func_quote_for_eval "${2}" dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) # Save a `func_append' function call where possible by direct use of '+=' sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: else # Save a `func_append' function call even when '+=' is not available sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$_lt_function_replace_fail" = x":"; then AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) fi ]) # _LT_PATH_CONVERSION_FUNCTIONS # ----------------------------- # Determine which file name conversion functions should be used by # func_to_host_file (and, implicitly, by func_to_host_path). These are needed # for certain cross-compile configurations and native mingw. m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_MSG_CHECKING([how to convert $build file names to $host format]) AC_CACHE_VAL(lt_cv_to_host_file_cmd, [case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ;; esac ;; *-*-cygwin* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_noop ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ;; esac ;; * ) # unhandled hosts (and "normal" native builds) lt_cv_to_host_file_cmd=func_convert_file_noop ;; esac ]) to_host_file_cmd=$lt_cv_to_host_file_cmd AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) _LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], [0], [convert $build file names to $host format])dnl AC_MSG_CHECKING([how to convert $build file names to toolchain format]) AC_CACHE_VAL(lt_cv_to_tool_file_cmd, [#assume ordinary cross tools, or native build. lt_cv_to_tool_file_cmd=func_convert_file_noop case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ;; esac ;; esac ]) to_tool_file_cmd=$lt_cv_to_tool_file_cmd AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) _LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], [0], [convert $build files to toolchain format])dnl ])# _LT_PATH_CONVERSION_FUNCTIONS # Helper functions for option handling. -*- Autoconf -*- # # Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, # Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 7 ltoptions.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) # _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) # ------------------------------------------ m4_define([_LT_MANGLE_OPTION], [[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) # _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) # --------------------------------------- # Set option OPTION-NAME for macro MACRO-NAME, and if there is a # matching handler defined, dispatch to it. Other OPTION-NAMEs are # saved as a flag. m4_define([_LT_SET_OPTION], [m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), _LT_MANGLE_DEFUN([$1], [$2]), [m4_warning([Unknown $1 option `$2'])])[]dnl ]) # _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) # ------------------------------------------------------------ # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. m4_define([_LT_IF_OPTION], [m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) # _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) # ------------------------------------------------------- # Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME # are set. m4_define([_LT_UNLESS_OPTIONS], [m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), [m4_define([$0_found])])])[]dnl m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 ])[]dnl ]) # _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) # ---------------------------------------- # OPTION-LIST is a space-separated list of Libtool options associated # with MACRO-NAME. If any OPTION has a matching handler declared with # LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about # the unknown option and exit. m4_defun([_LT_SET_OPTIONS], [# Set options m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [_LT_SET_OPTION([$1], _LT_Option)]) m4_if([$1],[LT_INIT],[ dnl dnl Simply set some default values (i.e off) if boolean options were not dnl specified: _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no ]) _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no ]) dnl dnl If no reference was made to various pairs of opposing options, then dnl we run the default mode handler for the pair. For example, if neither dnl `shared' nor `disable-shared' was passed, we enable building of shared dnl archives by default: _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], [_LT_ENABLE_FAST_INSTALL]) ]) ])# _LT_SET_OPTIONS # _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) # ----------------------------------------- m4_define([_LT_MANGLE_DEFUN], [[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) # LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) # ----------------------------------------------- m4_define([LT_OPTION_DEFINE], [m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl ])# LT_OPTION_DEFINE # dlopen # ------ LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes ]) AU_DEFUN([AC_LIBTOOL_DLOPEN], [_LT_SET_OPTION([LT_INIT], [dlopen]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `dlopen' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) # win32-dll # --------- # Declare package support for building win32 dll's. LT_OPTION_DEFINE([LT_INIT], [win32-dll], [enable_win32_dll=yes case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) ;; esac test -z "$AS" && AS=as _LT_DECL([], [AS], [1], [Assembler program])dnl test -z "$DLLTOOL" && DLLTOOL=dlltool _LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl ])# win32-dll AU_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_REQUIRE([AC_CANONICAL_HOST])dnl _LT_SET_OPTION([LT_INIT], [win32-dll]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `win32-dll' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) # _LT_ENABLE_SHARED([DEFAULT]) # ---------------------------- # implement the --enable-shared flag, and supports the `shared' and # `disable-shared' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_SHARED], [m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([shared], [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) _LT_DECL([build_libtool_libs], [enable_shared], [0], [Whether or not to build shared libraries]) ])# _LT_ENABLE_SHARED LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) # Old names: AC_DEFUN([AC_ENABLE_SHARED], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) ]) AC_DEFUN([AC_DISABLE_SHARED], [_LT_SET_OPTION([LT_INIT], [disable-shared]) ]) AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_SHARED], []) dnl AC_DEFUN([AM_DISABLE_SHARED], []) # _LT_ENABLE_STATIC([DEFAULT]) # ---------------------------- # implement the --enable-static flag, and support the `static' and # `disable-static' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_STATIC], [m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([static], [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_static=]_LT_ENABLE_STATIC_DEFAULT) _LT_DECL([build_old_libs], [enable_static], [0], [Whether or not to build static libraries]) ])# _LT_ENABLE_STATIC LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) # Old names: AC_DEFUN([AC_ENABLE_STATIC], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) ]) AC_DEFUN([AC_DISABLE_STATIC], [_LT_SET_OPTION([LT_INIT], [disable-static]) ]) AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_STATIC], []) dnl AC_DEFUN([AM_DISABLE_STATIC], []) # _LT_ENABLE_FAST_INSTALL([DEFAULT]) # ---------------------------------- # implement the --enable-fast-install flag, and support the `fast-install' # and `disable-fast-install' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_FAST_INSTALL], [m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([fast-install], [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) _LT_DECL([fast_install], [enable_fast_install], [0], [Whether or not to optimize for fast installation])dnl ])# _LT_ENABLE_FAST_INSTALL LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) # Old names: AU_DEFUN([AC_ENABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `fast-install' option into LT_INIT's first parameter.]) ]) AU_DEFUN([AC_DISABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], [disable-fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `disable-fast-install' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) # _LT_WITH_PIC([MODE]) # -------------------- # implement the --with-pic flag, and support the `pic-only' and `no-pic' # LT_INIT options. # MODE is either `yes' or `no'. If omitted, it defaults to `both'. m4_define([_LT_WITH_PIC], [AC_ARG_WITH([pic], [AS_HELP_STRING([--with-pic], [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], [pic_mode="$withval"], [pic_mode=default]) test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) _LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl ])# _LT_WITH_PIC LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) # Old name: AU_DEFUN([AC_LIBTOOL_PICMODE], [_LT_SET_OPTION([LT_INIT], [pic-only]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `pic-only' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) m4_define([_LTDL_MODE], []) LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], [m4_define([_LTDL_MODE], [nonrecursive])]) LT_OPTION_DEFINE([LTDL_INIT], [recursive], [m4_define([_LTDL_MODE], [recursive])]) LT_OPTION_DEFINE([LTDL_INIT], [subproject], [m4_define([_LTDL_MODE], [subproject])]) m4_define([_LTDL_TYPE], []) LT_OPTION_DEFINE([LTDL_INIT], [installable], [m4_define([_LTDL_TYPE], [installable])]) LT_OPTION_DEFINE([LTDL_INIT], [convenience], [m4_define([_LTDL_TYPE], [convenience])]) # ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- # # Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 6 ltsugar.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) # lt_join(SEP, ARG1, [ARG2...]) # ----------------------------- # Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their # associated separator. # Needed until we can rely on m4_join from Autoconf 2.62, since all earlier # versions in m4sugar had bugs. m4_define([lt_join], [m4_if([$#], [1], [], [$#], [2], [[$2]], [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) m4_define([_lt_join], [m4_if([$#$2], [2], [], [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) # lt_car(LIST) # lt_cdr(LIST) # ------------ # Manipulate m4 lists. # These macros are necessary as long as will still need to support # Autoconf-2.59 which quotes differently. m4_define([lt_car], [[$1]]) m4_define([lt_cdr], [m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], [$#], 1, [], [m4_dquote(m4_shift($@))])]) m4_define([lt_unquote], $1) # lt_append(MACRO-NAME, STRING, [SEPARATOR]) # ------------------------------------------ # Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. # Note that neither SEPARATOR nor STRING are expanded; they are appended # to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). # No SEPARATOR is output if MACRO-NAME was previously undefined (different # than defined and empty). # # This macro is needed until we can rely on Autoconf 2.62, since earlier # versions of m4sugar mistakenly expanded SEPARATOR but not STRING. m4_define([lt_append], [m4_define([$1], m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) # lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) # ---------------------------------------------------------- # Produce a SEP delimited list of all paired combinations of elements of # PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list # has the form PREFIXmINFIXSUFFIXn. # Needed until we can rely on m4_combine added in Autoconf 2.62. m4_define([lt_combine], [m4_if(m4_eval([$# > 3]), [1], [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl [[m4_foreach([_Lt_prefix], [$2], [m4_foreach([_Lt_suffix], ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) # lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) # ----------------------------------------------------------------------- # Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited # by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. m4_define([lt_if_append_uniq], [m4_ifdef([$1], [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], [lt_append([$1], [$2], [$3])$4], [$5])], [lt_append([$1], [$2], [$3])$4])]) # lt_dict_add(DICT, KEY, VALUE) # ----------------------------- m4_define([lt_dict_add], [m4_define([$1($2)], [$3])]) # lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) # -------------------------------------------- m4_define([lt_dict_add_subkey], [m4_define([$1($2:$3)], [$4])]) # lt_dict_fetch(DICT, KEY, [SUBKEY]) # ---------------------------------- m4_define([lt_dict_fetch], [m4_ifval([$3], m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) # lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) # ----------------------------------------------------------------- m4_define([lt_if_dict_fetch], [m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], [$5], [$6])]) # lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) # -------------------------------------------------------------- m4_define([lt_dict_filter], [m4_if([$5], [], [], [lt_join(m4_quote(m4_default([$4], [[, ]])), lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl ]) # ltversion.m4 -- version numbers -*- Autoconf -*- # # Copyright (C) 2004 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # @configure_input@ # serial 3293 ltversion.m4 # This file is part of GNU Libtool m4_define([LT_PACKAGE_VERSION], [2.4]) m4_define([LT_PACKAGE_REVISION], [1.3293]) AC_DEFUN([LTVERSION_VERSION], [macro_version='2.4' macro_revision='1.3293' _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) _LT_DECL(, macro_revision, 0) ]) # lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- # # Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004. # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 5 lt~obsolete.m4 # These exist entirely to fool aclocal when bootstrapping libtool. # # In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) # which have later been changed to m4_define as they aren't part of the # exported API, or moved to Autoconf or Automake where they belong. # # The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN # in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us # using a macro with the same name in our local m4/libtool.m4 it'll # pull the old libtool.m4 in (it doesn't see our shiny new m4_define # and doesn't know about Autoconf macros at all.) # # So we provide this file, which has a silly filename so it's always # included after everything else. This provides aclocal with the # AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything # because those macros already exist, or will be overwritten later. # We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. # # Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. # Yes, that means every name once taken will need to remain here until # we give up compatibility with versions before 1.7, at which point # we need to keep only those names which we still refer to. # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) # Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.11' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.11.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.11.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to # `$srcdir', `$srcdir/..', or `$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is `.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 9 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 10 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "GCJ", or "OBJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], UPC, [depcc="$UPC" am_compiler_list=], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi am__universal=false m4_case([$1], [CC], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac], [CXX], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac]) for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, [ --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. #serial 5 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ # Autoconf 2.62 quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each `.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 8 # AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2008, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 16 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.62])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], [define([AC_PROG_CC], defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES(CXX)], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES(OBJC)], [define([AC_PROG_OBJC], defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl ]) _AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl dnl The `parallel-tests' driver may need to know about EXEEXT, so add the dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl ]) dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- # From Jim Meyering # Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 5 # AM_MAINTAINER_MODE([DEFAULT-MODE]) # ---------------------------------- # Control maintainer-specific portions of Makefiles. # Default is to disable them, unless `enable' is passed literally. # For symmetry, `disable' may be passed as well. Anyway, the user # can override the default with the --enable/--disable switch. AC_DEFUN([AM_MAINTAINER_MODE], [m4_case(m4_default([$1], [disable]), [enable], [m4_define([am_maintainer_other], [disable])], [disable], [m4_define([am_maintainer_other], [enable])], [m4_define([am_maintainer_other], [enable]) m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles]) dnl maintainer-mode's default is 'disable' unless 'enable' is passed AC_ARG_ENABLE([maintainer-mode], [ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful (and sometimes confusing) to the casual installer], [USE_MAINTAINER_MODE=$enableval], [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) AC_MSG_RESULT([$USE_MAINTAINER_MODE]) AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) MAINT=$MAINTAINER_MODE_TRUE AC_SUBST([MAINT])dnl ] ) AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from `make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 6 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= AC_MSG_WARN([`missing' script is too old or missing]) fi ]) # Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_MKDIR_P # --------------- # Check for `mkdir -p'. AC_DEFUN([AM_PROG_MKDIR_P], [AC_PREREQ([2.60])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, dnl while keeping a definition of mkdir_p for backward compatibility. dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of dnl Makefile.ins that do not define MKDIR_P, so we do our own dnl adjustment using top_builddir (which is defined more often than dnl MKDIR_P). AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl case $mkdir_p in [[\\/$]]* | ?:[[\\/]]*) ;; */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac ]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # ------------------------------ # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) # _AM_SET_OPTIONS(OPTIONS) # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 5 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; esac # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor `install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in `make install-strip', and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be `maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of `v7', `ustar', or `pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. AM_MISSING_PROG([AMTAR], [tar]) m4_if([$1], [v7], [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], [m4_case([$1], [ustar],, [pax],, [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' _am_tools=${am_cv_prog_tar_$1-$_am_tools} # Do not fold the above two line into one, because Tru64 sh and # Solaris sh will not grok spaces in the rhs of `-'. for _am_tool in $_am_tools do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR smp_utils-0.97/config.h.in0000664000175000017500000000373311665236170014526 0ustar douggdougg/* config.h.in. Generated from configure.ac by autoheader. */ /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_LINUX_BSG_H /* Define to 1 if you have the header file. */ #undef HAVE_LINUX_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define to the sub-directory in which libtool stores uninstalled libraries. */ #undef LT_OBJDIR /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the home page for this package. */ #undef PACKAGE_URL /* Define to the version of this package. */ #undef PACKAGE_VERSION /* smp_utils Build Host */ #undef SMP_UTILS_BUILD_HOST /* smp_utils on FreeBSD */ #undef SMP_UTILS_FREEBSD /* assume smp_utils on linux */ #undef SMP_UTILS_LINUX /* smp_utils on Solaris */ #undef SMP_UTILS_SOLARIS /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Version number of package */ #undef VERSION smp_utils-0.97/ChangeLog0000664000175000017500000001170711706323015014244 0ustar douggdouggEach utility has its own version number, date of last change and some description at the top of its ".c" file. All utilities in the main directory have their own "man" pages. Changelog for smp_utils-0.97 [20120120] [svn:r116] - smp_conf_phy_event: new utility - change to ./configure style build and use smputils runtime and development libraries - change binary install from /usr/bin to /usr/sbin in debian and rpm (.spec) scripts - sync to SPL-2 (spl2r03) - take resid into account when calculating the actual response length - smp_rep_phy_event, smp_rep_phy_event_list: add --enumerate option to list Phy Event Source names - smp_read_gpio, smp_write_gpio: move register type, index and count fields in enhanced variants - add solaris and freebsd ports Changelog for smp_utils-0.96 [20110620] [svn:r96] - smp_conf_zone_perm_tbl, smp_conf_zone_man_pass smp_conf_zone_phy_info, smp_ena_dis_zoning, smp_rep_broadcast, smp_rep_phy_event, smp_rep_phy_event_list, smp_rep_self_conf_stat, smp_rep_zone_man_pass, smp_rep_zone_perm_tbl, smp_zone_activate, smp_zoned_broadcast, smp_zone_lock, smp_zone_unlock: add these new utilities - all utilities: sync to SPL-2 (spl2r01) -those with '--phy=ID' option: increase max from 128 to 254 - smp_discover, smp_discover_list: add --adn and --summary - make --summary default if --phy=ID option not given - with --summary show disabled and errored phys - smp_discover: add --my and --zero option - smp_discover_list: add --zpi=FN option - smp_rep_general, smp_rep_manufacturer, smp_rep_phy_err_log, smp_rep_phy_sata: add --zero options - smp_conf_general: add --power option - smp_read_gpio, smp_write_gpio: add --enhanced option - add examples directory, mainly for zoning - remove doc/smp_utils.html , refer readers to web page - remove tpl (ai) interface Changelog for smp_utils-0.95 [20101116] [svn:r47] - place link to smp_utils.html examples in man pages - alter Makefile for non-root users - add spl-r04 discover changes (spl is upper layers of sas-2.1) - mpt: cope with mpt2 ioctl that uses a different magic number Changelog for smp_utils-0.94 [20081229] [svn:r40] - smp_discover: sync to sas2r15 - smp_discover_list: sync to sas2r15 - smp_rep_general: sync to sas2r15 - smp_rep_exp_route_tbl: sync to sas2r15 - smp_lib: sync to sas2r15 - sgv4: more detail in error messages - sgv4: drop scsi.h include, gives problems with lk 2.6.27 - mpt: allow either /dev/mptctl or /dev/mpt2ctl [10;220-221] - warn if target SAS address is 0x00000000 when -v given Changelog for smp_utils-0.93 [20080106] [svn:r7] - sgv4: add new interface - smp_phy_control: sync with sas2r10 - smp_rep_phy_sata: affiliation contexts, added sas2r08 - smp_discover: add '--list' option for attribute=value output - smp_rep_general: sync with sas2r09..12 - smp_discover, smp_discover_list: sync with sas2r09..12 - warn if expander's SAS address is different from requested - add smp_rep_exp_route_tbl utility - abridge output from responses when prior to SAS-2 - rename this file from CHANGELOG to ChangeLog - place code in subversion repository - move smp_lib.h into include directory - move man pages into doc directory - add 'conforms to' section - fix FreeBSD build Changelog for smp_utils-0.92 [20061208] - all: suggest using '-v' if smp_send_req() fails - smp_lib: sync function names and results with sas2r07 - smp_rep_general: sync with sas2r07 - smp_rep_route_info: add '--multiple' and '--num=" options. Underlying SMP function may be called multiple times to show one line per phy's route table. - smp_lib.h: add C++ 'extern "C" ' wrapper - smp_discover+smp_discover_list: sync with sas2r07 - smp_conf_general: add new SMP function - smp_utils.8: suggestions for finding expander SAS addresses and mptsas ioc_num - Makefile.freebsd: builds utilities on FreeBSD - man pages: cleanup Changelog for smp_utils-0.91 [20060822] - add '--multiple' to smp_discover - add uniform exit status values (see 'man smp_utils') - fix affiliations flags in smp_rep_phy_sata - report bad operation abbreviations in smp_phy_control - add '--change_report' option to smp_rep_general - improve mpt error detection and reporting - add information to COVERAGE file - smp_rep_general: add physical presence and zoning bits - smp_phy_test: add new SMP function - smp_discover_list: add new SMP function - smp_conf_route_info, smp_phy_control, smp_phy_test: add '--expected=' option to set "expected expander change count" in request Changelog for smp_utils-0.90 [20060611] - add smp_read_gpio utility (READ GPIO REGISTER) - add logic to read SMP_UTILS_DEVICE and SMP_UTILS_SAS_ADDR environment variables if those options not on command line - add smp_conf_route_info (CONFIGURE ROUTE INFORMATION) - add smp_write_gpio (WRITE GPIO REGISTER) - add debian build infrastructure - add smp_utils.html to doc subdirectory smp_utils-0.97/COVERAGE0000664000175000017500000000774311637072531013624 0ustar douggdougg Function coverage ================= The following table lists SAS Serial Management Protocol (SMP) functions in alphabetical order in the left column. The second column is the standard or draft that the function first appeared in or was extended. The final column is the utility in the smp_utils package that invokes that function on a given SMP target. Notice that many of the newly introduced functions have no corresponding utility. SMP Function Standard smp_utils utility ------------------------------------ --------------- --------------------- CONFIGURE GENERAL 2 smp_conf_general CONFIGURE PHY EVENT 2 smp_conf_phy_event CONFIGURE ROUTE INFORMATION 1, 2 smp_conf_route_info CONFIGURE ZONE MANAGER PASSWORD 2 smp_conf_zone_man_pass CONFIGURE ZONE PERMISSION TABLE 2 smp_conf_zone_perm_tbl CONFIGURE ZONE PHY INFORMATION 2 smp_conf_zone_phy_info DISCOVER 1, 1.1, 2 smp_discover DISCOVER LIST 2 smp_discover_list ENABLE DISABLE ZONING 2 smp_ena_dis_zoning PHY CONTROL 1, 2 smp_phy_control PHY TEST FUNCTION 1.1, 2 smp_phy_test READ GPIO REGISTER SFF-8485* smp_read_gpio READ GPIO REGISTER ENHANCED SFF-8485* smp_read_gpio REPORT BROADCAST 2 smp_rep_broadcast REPORT EXPANDER ROUTE TABLE LIST 2 smp_rep_exp_route_tbl REPORT GENERAL 1, 1.1, 2 smp_rep_general REPORT MANUFACTURER INFORMATION 1, 1.1, 2 smp_rep_manufacturer /* REPORT PHY BROADCAST COUNTS 2 removed in sas2r13 */ REPORT PHY ERROR LOG 1, 2 smp_rep_phy_err_log REPORT PHY EVENT 2 smp_rep_phy_event REPORT PHY EVENT LIST 2 smp_rep_phy_event_list REPORT PHY SATA 1, 2 smp_rep_phy_sata REPORT ROUTE INFORMATION 1, 2 smp_rep_route_info REPORT SELF-CONFIGURATION STATUS 2 smp_rep_self_conf_stat REPORT ZONE MANAGER PASSWORD 2 smp_rep_zone_man_pass REPORT ZONE PERMISSION TABLE 2 smp_rep_zone_perm_tbl WRITE GPIO REGISTER SFF-8485* smp_write_gpio WRITE GPIO REGISTER ENHANCED SFF-8485* smp_write_gpio ZONE ACTIVATE 2 smp_zone_activate ZONE LOCK 2 smp_zone_lock ZONE UNLOCK 2 smp_zone_unlock ZONED BROADCAST 2 smp_zoned_broadcast * in sas2r16 the non-ENHANCED versions are marked as obsolete but the ENHANCED version are not yet defined in the most recent SFF-8485 (rev 0.7). In SAS-2.1 (spl-r07) and SAS-3 (spl2r03) these 4 functions are not defined (the ENHANCED function codes are "restricted for SFF"). The sas-r05.pdf draft is taken to represent the original SAS standard (ANSI INCITS 376-2003). The sas1r10.pdf draft is taken to represent the SAS-1.1 standard (ANSI INCITS 417-2006). The sas2r16.pdf draft is taken to represent the SAS-2 standard (ANSI INCITS 457-2010). Now there is a SAS-2.1 standard at the draft stage and it has been split into 2 documents. The document containing the SMP functions is called the SAS Protocol Layer (SPL). So far only a small number of changes have been made to the SMP functions in the SPL draft. Work is ongoing on a SAS-3 standard in which a phy can run up to 12 Gbps. The document containing the SMP functions corresponding to SAS-3 is called SPL-2 and the first draft was recently placed on the t10 ftp site. Doug Gilbert 23rd September 2011 smp_utils-0.97/ltmain.sh0000775000175000017500000105052711661054767014340 0ustar douggdougg # libtool (GNU libtool) 2.4 # Written by Gordon Matzigkeit , 1996 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, # 2007, 2008, 2009, 2010 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, # or obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # Usage: $progname [OPTION]... [MODE-ARG]... # # Provide generalized library-building support services. # # --config show all configuration variables # --debug enable verbose shell tracing # -n, --dry-run display commands without modifying any files # --features display basic configuration information and exit # --mode=MODE use operation mode MODE # --preserve-dup-deps don't remove duplicate dependency libraries # --quiet, --silent don't print informational messages # --no-quiet, --no-silent # print informational messages (default) # --tag=TAG use configuration variables from tag TAG # -v, --verbose print more informational messages than default # --no-verbose don't print the extra informational messages # --version print version information # -h, --help, --help-all print short, long, or detailed help message # # MODE must be one of the following: # # clean remove files from the build directory # compile compile a source file into a libtool object # execute automatically set library path, then run a program # finish complete the installation of libtool libraries # install install libraries or executables # link create a library or an executable # uninstall remove libraries from an installed directory # # MODE-ARGS vary depending on the MODE. When passed as first option, # `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. # Try `$progname --help --mode=MODE' for a more detailed description of MODE. # # When reporting a bug, please describe a test case to reproduce it and # include the following information: # # host-triplet: $host # shell: $SHELL # compiler: $LTCC # compiler flags: $LTCFLAGS # linker: $LD (gnu? $with_gnu_ld) # $progname: (GNU libtool) 2.4 Debian-2.4-2ubuntu1 # automake: $automake_version # autoconf: $autoconf_version # # Report bugs to . # GNU libtool home page: . # General help using GNU software: . PROGRAM=libtool PACKAGE=libtool VERSION="2.4 Debian-2.4-2ubuntu1" TIMESTAMP="" package_revision=1.3293 # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } # NLS nuisances: We save the old values to restore during execute mode. lt_user_locale= lt_safe_locale= for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${$lt_var+set}\" = set; then save_$lt_var=\$$lt_var $lt_var=C export $lt_var lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" fi" done LC_ALL=C LANGUAGE=C export LANGUAGE LC_ALL $lt_unset CDPATH # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh # is ksh but when the shell is invoked as "sh" and the current value of # the _XPG environment variable is not equal to 1 (one), the special # positional parameter $0, within a function call, is the name of the # function. progpath="$0" : ${CP="cp -f"} test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} : ${EGREP="/bin/grep -E"} : ${FGREP="/bin/grep -F"} : ${GREP="/bin/grep"} : ${LN_S="ln -s"} : ${MAKE="make"} : ${MKDIR="mkdir"} : ${MV="mv -f"} : ${RM="rm -f"} : ${SED="/bin/sed"} : ${SHELL="${CONFIG_SHELL-/bin/sh}"} : ${Xsed="$SED -e 1s/^X//"} # Global variables: EXIT_SUCCESS=0 EXIT_FAILURE=1 EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. exit_status=$EXIT_SUCCESS # Make sure IFS has a sensible default lt_nl=' ' IFS=" $lt_nl" dirname="s,/[^/]*$,," basename="s,^.*/,," # func_dirname file append nondir_replacement # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. func_dirname () { func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi } # func_dirname may be replaced by extended shell implementation # func_basename file func_basename () { func_basename_result=`$ECHO "${1}" | $SED "$basename"` } # func_basename may be replaced by extended shell implementation # func_dirname_and_basename file append nondir_replacement # perform func_basename and func_dirname in a single function # call: # dirname: Compute the dirname of FILE. If nonempty, # add APPEND to the result, otherwise set result # to NONDIR_REPLACEMENT. # value returned in "$func_dirname_result" # basename: Compute filename of FILE. # value retuned in "$func_basename_result" # Implementation must be kept synchronized with func_dirname # and func_basename. For efficiency, we do not delegate to # those functions but instead duplicate the functionality here. func_dirname_and_basename () { # Extract subdirectory from the argument. func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` } # func_dirname_and_basename may be replaced by extended shell implementation # func_stripname prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # func_strip_suffix prefix name func_stripname () { case ${2} in .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; esac } # func_stripname may be replaced by extended shell implementation # These SED scripts presuppose an absolute path with a trailing slash. pathcar='s,^/\([^/]*\).*$,\1,' pathcdr='s,^/[^/]*,,' removedotparts=':dotsl s@/\./@/@g t dotsl s,/\.$,/,' collapseslashes='s@/\{1,\}@/@g' finalslash='s,/*$,/,' # func_normal_abspath PATH # Remove doubled-up and trailing slashes, "." path components, # and cancel out any ".." path components in PATH after making # it an absolute path. # value returned in "$func_normal_abspath_result" func_normal_abspath () { # Start from root dir and reassemble the path. func_normal_abspath_result= func_normal_abspath_tpath=$1 func_normal_abspath_altnamespace= case $func_normal_abspath_tpath in "") # Empty path, that just means $cwd. func_stripname '' '/' "`pwd`" func_normal_abspath_result=$func_stripname_result return ;; # The next three entries are used to spot a run of precisely # two leading slashes without using negated character classes; # we take advantage of case's first-match behaviour. ///*) # Unusual form of absolute path, do nothing. ;; //*) # Not necessarily an ordinary path; POSIX reserves leading '//' # and for example Cygwin uses it to access remote file shares # over CIFS/SMB, so we conserve a leading double slash if found. func_normal_abspath_altnamespace=/ ;; /*) # Absolute path, do nothing. ;; *) # Relative path, prepend $cwd. func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath ;; esac # Cancel out all the simple stuff to save iterations. We also want # the path to end with a slash for ease of parsing, so make sure # there is one (and only one) here. func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` while :; do # Processed it all yet? if test "$func_normal_abspath_tpath" = / ; then # If we ascended to the root using ".." the result may be empty now. if test -z "$func_normal_abspath_result" ; then func_normal_abspath_result=/ fi break fi func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$pathcar"` func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$pathcdr"` # Figure out what to do with it case $func_normal_abspath_tcomponent in "") # Trailing empty path component, ignore it. ;; ..) # Parent dir; strip last assembled component from result. func_dirname "$func_normal_abspath_result" func_normal_abspath_result=$func_dirname_result ;; *) # Actual path component, append it. func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent ;; esac done # Restore leading double-slash if one was found on entry. func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result } # func_relative_path SRCDIR DSTDIR # generates a relative path from SRCDIR to DSTDIR, with a trailing # slash if non-empty, suitable for immediately appending a filename # without needing to append a separator. # value returned in "$func_relative_path_result" func_relative_path () { func_relative_path_result= func_normal_abspath "$1" func_relative_path_tlibdir=$func_normal_abspath_result func_normal_abspath "$2" func_relative_path_tbindir=$func_normal_abspath_result # Ascend the tree starting from libdir while :; do # check if we have found a prefix of bindir case $func_relative_path_tbindir in $func_relative_path_tlibdir) # found an exact match func_relative_path_tcancelled= break ;; $func_relative_path_tlibdir*) # found a matching prefix func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" func_relative_path_tcancelled=$func_stripname_result if test -z "$func_relative_path_result"; then func_relative_path_result=. fi break ;; *) func_dirname $func_relative_path_tlibdir func_relative_path_tlibdir=${func_dirname_result} if test "x$func_relative_path_tlibdir" = x ; then # Have to descend all the way to the root! func_relative_path_result=../$func_relative_path_result func_relative_path_tcancelled=$func_relative_path_tbindir break fi func_relative_path_result=../$func_relative_path_result ;; esac done # Now calculate path; take care to avoid doubling-up slashes. func_stripname '' '/' "$func_relative_path_result" func_relative_path_result=$func_stripname_result func_stripname '/' '/' "$func_relative_path_tcancelled" if test "x$func_stripname_result" != x ; then func_relative_path_result=${func_relative_path_result}/${func_stripname_result} fi # Normalisation. If bindir is libdir, return empty string, # else relative path ending with a slash; either way, target # file name can be directly appended. if test ! -z "$func_relative_path_result"; then func_stripname './' '' "$func_relative_path_result/" func_relative_path_result=$func_stripname_result fi } # The name of this program: func_dirname_and_basename "$progpath" progname=$func_basename_result # Make sure we have an absolute path for reexecution: case $progpath in [\\/]*|[A-Za-z]:\\*) ;; *[\\/]*) progdir=$func_dirname_result progdir=`cd "$progdir" && pwd` progpath="$progdir/$progname" ;; *) save_IFS="$IFS" IFS=: for progdir in $PATH; do IFS="$save_IFS" test -x "$progdir/$progname" && break done IFS="$save_IFS" test -n "$progdir" || progdir=`pwd` progpath="$progdir/$progname" ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed="${SED}"' -e 1s/^X//' sed_quote_subst='s/\([`"$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution that turns a string into a regex matching for the # string literally. sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' # Sed substitution that converts a w32 file name or path # which contains forward slashes, into one that contains # (escaped) backslashes. A very naive implementation. lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' # Re-`\' parameter expansions in output of double_quote_subst that were # `\'-ed in input to the same. If an odd number of `\' preceded a '$' # in input to double_quote_subst, that '$' was protected from expansion. # Since each input `\' is now two `\'s, look for any number of runs of # four `\'s followed by two `\'s and then a '$'. `\' that '$'. bs='\\' bs2='\\\\' bs4='\\\\\\\\' dollar='\$' sed_double_backslash="\ s/$bs4/&\\ /g s/^$bs2$dollar/$bs&/ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g s/\n//g" # Standard options: opt_dry_run=false opt_help=false opt_quiet=false opt_verbose=false opt_warning=: # func_echo arg... # Echo program name prefixed message, along with the current mode # name if it has been set yet. func_echo () { $ECHO "$progname: ${opt_mode+$opt_mode: }$*" } # func_verbose arg... # Echo program name prefixed message in verbose mode only. func_verbose () { $opt_verbose && func_echo ${1+"$@"} # A bug in bash halts the script if the last line of a function # fails when set -e is in force, so we need another command to # work around that: : } # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "$*" } # func_error arg... # Echo program name prefixed message to standard error. func_error () { $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 } # func_warning arg... # Echo program name prefixed warning message to standard error. func_warning () { $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 # bash bug again: : } # func_fatal_error arg... # Echo program name prefixed message to standard error, and exit. func_fatal_error () { func_error ${1+"$@"} exit $EXIT_FAILURE } # func_fatal_help arg... # Echo program name prefixed message to standard error, followed by # a help hint, and exit. func_fatal_help () { func_error ${1+"$@"} func_fatal_error "$help" } help="Try \`$progname --help' for more information." ## default # func_grep expression filename # Check whether EXPRESSION matches any line of FILENAME, without output. func_grep () { $GREP "$1" "$2" >/dev/null 2>&1 } # func_mkdir_p directory-path # Make sure the entire path to DIRECTORY-PATH is available. func_mkdir_p () { my_directory_path="$1" my_dir_list= if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then # Protect directory names starting with `-' case $my_directory_path in -*) my_directory_path="./$my_directory_path" ;; esac # While some portion of DIR does not yet exist... while test ! -d "$my_directory_path"; do # ...make a list in topmost first order. Use a colon delimited # list incase some portion of path contains whitespace. my_dir_list="$my_directory_path:$my_dir_list" # If the last portion added has no slash in it, the list is done case $my_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` done my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` save_mkdir_p_IFS="$IFS"; IFS=':' for my_dir in $my_dir_list; do IFS="$save_mkdir_p_IFS" # mkdir can fail with a `File exist' error if two processes # try to create one of the directories concurrently. Don't # stop in that case! $MKDIR "$my_dir" 2>/dev/null || : done IFS="$save_mkdir_p_IFS" # Bail out if we (or some other process) failed to create a directory. test -d "$my_directory_path" || \ func_fatal_error "Failed to create \`$1'" fi } # func_mktempdir [string] # Make a temporary directory that won't clash with other running # libtool processes, and avoids race conditions if possible. If # given, STRING is the basename for that directory. func_mktempdir () { my_template="${TMPDIR-/tmp}/${1-$progname}" if test "$opt_dry_run" = ":"; then # Return a directory name, but don't create it in dry-run mode my_tmpdir="${my_template}-$$" else # If mktemp works, use that first and foremost my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` if test ! -d "$my_tmpdir"; then # Failing that, at least try and use $RANDOM to avoid a race my_tmpdir="${my_template}-${RANDOM-0}$$" save_mktempdir_umask=`umask` umask 0077 $MKDIR "$my_tmpdir" umask $save_mktempdir_umask fi # If we're not in dry-run mode, bomb out on failure test -d "$my_tmpdir" || \ func_fatal_error "cannot create temporary directory \`$my_tmpdir'" fi $ECHO "$my_tmpdir" } # func_quote_for_eval arg # Aesthetically quote ARG to be evaled later. # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT # is double-quoted, suitable for a subsequent eval, whereas # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters # which are still active within double quotes backslashified. func_quote_for_eval () { case $1 in *[\\\`\"\$]*) func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; *) func_quote_for_eval_unquoted_result="$1" ;; esac case $func_quote_for_eval_unquoted_result in # Double-quote args containing shell metacharacters to delay # word splitting, command substitution and and variable # expansion for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" ;; *) func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" esac } # func_quote_for_expand arg # Aesthetically quote ARG to be evaled later; same as above, # but do not quote variable references. func_quote_for_expand () { case $1 in *[\\\`\"]*) my_arg=`$ECHO "$1" | $SED \ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; *) my_arg="$1" ;; esac case $my_arg in # Double-quote args containing shell metacharacters to delay # word splitting and command substitution for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") my_arg="\"$my_arg\"" ;; esac func_quote_for_expand_result="$my_arg" } # func_show_eval cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. func_show_eval () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$my_cmd" my_status=$? if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_show_eval_locale cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. Use the saved locale for evaluation. func_show_eval_locale () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$lt_user_locale $my_cmd" my_status=$? eval "$lt_safe_locale" if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_tr_sh # Turn $1 into a string suitable for a shell variable name. # Result is stored in $func_tr_sh_result. All characters # not in the set a-zA-Z0-9_ are replaced with '_'. Further, # if $1 begins with a digit, a '_' is prepended as well. func_tr_sh () { case $1 in [0-9]* | *[!a-zA-Z0-9_]*) func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` ;; * ) func_tr_sh_result=$1 ;; esac } # func_version # Echo version message to standard output and exit. func_version () { $opt_debug $SED -n '/(C)/!b go :more /\./!{ N s/\n# / / b more } :go /^# '$PROGRAM' (GNU /,/# warranty; / { s/^# // s/^# *$// s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ p }' < "$progpath" exit $? } # func_usage # Echo short help message to standard output and exit. func_usage () { $opt_debug $SED -n '/^# Usage:/,/^# *.*--help/ { s/^# // s/^# *$// s/\$progname/'$progname'/ p }' < "$progpath" echo $ECHO "run \`$progname --help | more' for full usage" exit $? } # func_help [NOEXIT] # Echo long help message to standard output and exit, # unless 'noexit' is passed as argument. func_help () { $opt_debug $SED -n '/^# Usage:/,/# Report bugs to/ { :print s/^# // s/^# *$// s*\$progname*'$progname'* s*\$host*'"$host"'* s*\$SHELL*'"$SHELL"'* s*\$LTCC*'"$LTCC"'* s*\$LTCFLAGS*'"$LTCFLAGS"'* s*\$LD*'"$LD"'* s/\$with_gnu_ld/'"$with_gnu_ld"'/ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ p d } /^# .* home page:/b print /^# General help using/b print ' < "$progpath" ret=$? if test -z "$1"; then exit $ret fi } # func_missing_arg argname # Echo program name prefixed message to standard error and set global # exit_cmd. func_missing_arg () { $opt_debug func_error "missing argument for $1." exit_cmd=exit } # func_split_short_opt shortopt # Set func_split_short_opt_name and func_split_short_opt_arg shell # variables after splitting SHORTOPT after the 2nd character. func_split_short_opt () { my_sed_short_opt='1s/^\(..\).*$/\1/;q' my_sed_short_rest='1s/^..\(.*\)$/\1/;q' func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` } # func_split_short_opt may be replaced by extended shell implementation # func_split_long_opt longopt # Set func_split_long_opt_name and func_split_long_opt_arg shell # variables after splitting LONGOPT at the `=' sign. func_split_long_opt () { my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' my_sed_long_arg='1s/^--[^=]*=//' func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` } # func_split_long_opt may be replaced by extended shell implementation exit_cmd=: magic="%%%MAGIC variable%%%" magic_exe="%%%MAGIC EXE variable%%%" # Global variables. nonopt= preserve_args= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" extracted_archives= extracted_serial=0 # If this variable is set in any of the actions, the command in it # will be execed at the end. This prevents here-documents from being # left over by shells. exec_cmd= # func_append var value # Append VALUE to the end of shell variable VAR. func_append () { eval "${1}=\$${1}\${2}" } # func_append may be replaced by extended shell implementation # func_append_quoted var value # Quote VALUE and append to the end of shell variable VAR, separated # by a space. func_append_quoted () { func_quote_for_eval "${2}" eval "${1}=\$${1}\\ \$func_quote_for_eval_result" } # func_append_quoted may be replaced by extended shell implementation # func_arith arithmetic-term... func_arith () { func_arith_result=`expr "${@}"` } # func_arith may be replaced by extended shell implementation # func_len string # STRING may not start with a hyphen. func_len () { func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` } # func_len may be replaced by extended shell implementation # func_lo2o object func_lo2o () { func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` } # func_lo2o may be replaced by extended shell implementation # func_xform libobj-or-source func_xform () { func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` } # func_xform may be replaced by extended shell implementation # func_fatal_configuration arg... # Echo program name prefixed message to standard error, followed by # a configuration failure hint, and exit. func_fatal_configuration () { func_error ${1+"$@"} func_error "See the $PACKAGE documentation for more information." func_fatal_error "Fatal configuration error." } # func_config # Display the configuration for all the tags in this script. func_config () { re_begincf='^# ### BEGIN LIBTOOL' re_endcf='^# ### END LIBTOOL' # Default configuration. $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" # Now print the configurations for the tags. for tagname in $taglist; do $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" done exit $? } # func_features # Display the features supported by this script. func_features () { echo "host: $host" if test "$build_libtool_libs" = yes; then echo "enable shared libraries" else echo "disable shared libraries" fi if test "$build_old_libs" = yes; then echo "enable static libraries" else echo "disable static libraries" fi exit $? } # func_enable_tag tagname # Verify that TAGNAME is valid, and either flag an error and exit, or # enable the TAGNAME tag. We also add TAGNAME to the global $taglist # variable here. func_enable_tag () { # Global variable: tagname="$1" re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" sed_extractcf="/$re_begincf/,/$re_endcf/p" # Validate tagname. case $tagname in *[!-_A-Za-z0-9,/]*) func_fatal_error "invalid tag name: $tagname" ;; esac # Don't test for the "default" C tag, as we know it's # there but not specially marked. case $tagname in CC) ;; *) if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then taglist="$taglist $tagname" # Evaluate the configuration. Be careful to quote the path # and the sed script, to avoid splitting on whitespace, but # also don't use non-portable quotes within backquotes within # quotes we have to do it in 2 steps: extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` eval "$extractedcf" else func_error "ignoring unknown tag $tagname" fi ;; esac } # func_check_version_match # Ensure that we are using m4 macros, and libtool script from the same # release of libtool. func_check_version_match () { if test "$package_revision" != "$macro_revision"; then if test "$VERSION" != "$macro_version"; then if test -z "$macro_version"; then cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from an older release. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from $PACKAGE $macro_version. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF fi else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, $progname: but the definition of this LT_INIT comes from revision $macro_revision. $progname: You should recreate aclocal.m4 with macros from revision $package_revision $progname: of $PACKAGE $VERSION and run autoconf again. _LT_EOF fi exit $EXIT_MISMATCH fi } # Shorthand for --mode=foo, only valid as the first argument case $1 in clean|clea|cle|cl) shift; set dummy --mode clean ${1+"$@"}; shift ;; compile|compil|compi|comp|com|co|c) shift; set dummy --mode compile ${1+"$@"}; shift ;; execute|execut|execu|exec|exe|ex|e) shift; set dummy --mode execute ${1+"$@"}; shift ;; finish|finis|fini|fin|fi|f) shift; set dummy --mode finish ${1+"$@"}; shift ;; install|instal|insta|inst|ins|in|i) shift; set dummy --mode install ${1+"$@"}; shift ;; link|lin|li|l) shift; set dummy --mode link ${1+"$@"}; shift ;; uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) shift; set dummy --mode uninstall ${1+"$@"}; shift ;; esac # Option defaults: opt_debug=: opt_dry_run=false opt_config=false opt_preserve_dup_deps=false opt_features=false opt_finish=false opt_help=false opt_help_all=false opt_silent=: opt_verbose=: opt_silent=false opt_verbose=false # Parse options once, thoroughly. This comes as soon as possible in the # script to make things like `--version' happen as quickly as we can. { # this just eases exit handling while test $# -gt 0; do opt="$1" shift case $opt in --debug|-x) opt_debug='set -x' func_echo "enabling shell trace mode" $opt_debug ;; --dry-run|--dryrun|-n) opt_dry_run=: ;; --config) opt_config=: func_config ;; --dlopen|-dlopen) optarg="$1" opt_dlopen="${opt_dlopen+$opt_dlopen }$optarg" shift ;; --preserve-dup-deps) opt_preserve_dup_deps=: ;; --features) opt_features=: func_features ;; --finish) opt_finish=: set dummy --mode finish ${1+"$@"}; shift ;; --help) opt_help=: ;; --help-all) opt_help_all=: opt_help=': help-all' ;; --mode) test $# = 0 && func_missing_arg $opt && break optarg="$1" opt_mode="$optarg" case $optarg in # Valid mode arguments: clean|compile|execute|finish|install|link|relink|uninstall) ;; # Catch anything else as an error *) func_error "invalid argument for $opt" exit_cmd=exit break ;; esac shift ;; --no-silent|--no-quiet) opt_silent=false func_append preserve_args " $opt" ;; --no-verbose) opt_verbose=false func_append preserve_args " $opt" ;; --silent|--quiet) opt_silent=: func_append preserve_args " $opt" opt_verbose=false ;; --verbose|-v) opt_verbose=: func_append preserve_args " $opt" opt_silent=false ;; --tag) test $# = 0 && func_missing_arg $opt && break optarg="$1" opt_tag="$optarg" func_append preserve_args " $opt $optarg" func_enable_tag "$optarg" shift ;; -\?|-h) func_usage ;; --help) func_help ;; --version) func_version ;; # Separate optargs to long options: --*=*) func_split_long_opt "$opt" set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} shift ;; # Separate non-argument short options: -\?*|-h*|-n*|-v*) func_split_short_opt "$opt" set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} shift ;; --) break ;; -*) func_fatal_help "unrecognized option \`$opt'" ;; *) set dummy "$opt" ${1+"$@"}; shift; break ;; esac done # Validate options: # save first non-option argument if test "$#" -gt 0; then nonopt="$opt" shift fi # preserve --debug test "$opt_debug" = : || func_append preserve_args " --debug" case $host in *cygwin* | *mingw* | *pw32* | *cegcc*) # don't eliminate duplications in $postdeps and $predeps opt_duplicate_compiler_generated_deps=: ;; *) opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps ;; esac $opt_help || { # Sanity checks first: func_check_version_match if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then func_fatal_configuration "not configured to build any kind of library" fi # Darwin sucks eval std_shrext=\"$shrext_cmds\" # Only execute mode is allowed to have -dlopen flags. if test -n "$opt_dlopen" && test "$opt_mode" != execute; then func_error "unrecognized option \`-dlopen'" $ECHO "$help" 1>&2 exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. generic_help="$help" help="Try \`$progname --help --mode=$opt_mode' for more information." } # Bail if the options were screwed $exit_cmd $EXIT_FAILURE } ## ----------- ## ## Main. ## ## ----------- ## # func_lalib_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_lalib_p () { test -f "$1" && $SED -e 4q "$1" 2>/dev/null \ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 } # func_lalib_unsafe_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function implements the same check as func_lalib_p without # resorting to external programs. To this end, it redirects stdin and # closes it afterwards, without saving the original file descriptor. # As a safety measure, use it only where a negative result would be # fatal anyway. Works if `file' does not exist. func_lalib_unsafe_p () { lalib_p=no if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then for lalib_p_l in 1 2 3 4 do read lalib_p_line case "$lalib_p_line" in \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; esac done exec 0<&5 5<&- fi test "$lalib_p" = yes } # func_ltwrapper_script_p file # True iff FILE is a libtool wrapper script # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_script_p () { func_lalib_p "$1" } # func_ltwrapper_executable_p file # True iff FILE is a libtool wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_executable_p () { func_ltwrapper_exec_suffix= case $1 in *.exe) ;; *) func_ltwrapper_exec_suffix=.exe ;; esac $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 } # func_ltwrapper_scriptname file # Assumes file is an ltwrapper_executable # uses $file to determine the appropriate filename for a # temporary ltwrapper_script. func_ltwrapper_scriptname () { func_dirname_and_basename "$1" "" "." func_stripname '' '.exe' "$func_basename_result" func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" } # func_ltwrapper_p file # True iff FILE is a libtool wrapper script or wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_p () { func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" } # func_execute_cmds commands fail_cmd # Execute tilde-delimited COMMANDS. # If FAIL_CMD is given, eval that upon failure. # FAIL_CMD may read-access the current command in variable CMD! func_execute_cmds () { $opt_debug save_ifs=$IFS; IFS='~' for cmd in $1; do IFS=$save_ifs eval cmd=\"$cmd\" func_show_eval "$cmd" "${2-:}" done IFS=$save_ifs } # func_source file # Source FILE, adding directory component if necessary. # Note that it is not necessary on cygwin/mingw to append a dot to # FILE even if both FILE and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing # `FILE.' does not work on cygwin managed mounts. func_source () { $opt_debug case $1 in */* | *\\*) . "$1" ;; *) . "./$1" ;; esac } # func_resolve_sysroot PATH # Replace a leading = in PATH with a sysroot. Store the result into # func_resolve_sysroot_result func_resolve_sysroot () { func_resolve_sysroot_result=$1 case $func_resolve_sysroot_result in =*) func_stripname '=' '' "$func_resolve_sysroot_result" func_resolve_sysroot_result=$lt_sysroot$func_stripname_result ;; esac } # func_replace_sysroot PATH # If PATH begins with the sysroot, replace it with = and # store the result into func_replace_sysroot_result. func_replace_sysroot () { case "$lt_sysroot:$1" in ?*:"$lt_sysroot"*) func_stripname "$lt_sysroot" '' "$1" func_replace_sysroot_result="=$func_stripname_result" ;; *) # Including no sysroot. func_replace_sysroot_result=$1 ;; esac } # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. # Only attempt this if the compiler in the base compile # command doesn't match the default compiler. # arg is usually of the form 'gcc ...' func_infer_tag () { $opt_debug if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) for z in $available_tags; do if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case "$@ " in " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. tagname=$z break ;; esac fi done # If $tagname still isn't set, then no tagged configuration # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then func_echo "unable to infer tagged configuration" func_fatal_error "specify a tag with \`--tag'" # else # func_verbose "using $tagname tagged configuration" fi ;; esac fi } # func_write_libtool_object output_name pic_name nonpic_name # Create a libtool object file (analogous to a ".la" file), # but don't create it if we're doing a dry run. func_write_libtool_object () { write_libobj=${1} if test "$build_libtool_libs" = yes; then write_lobj=\'${2}\' else write_lobj=none fi if test "$build_old_libs" = yes; then write_oldobj=\'${3}\' else write_oldobj=none fi $opt_dry_run || { cat >${write_libobj}T </dev/null` if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | $SED -e "$lt_sed_naive_backslashify"` else func_convert_core_file_wine_to_w32_result= fi fi } # end: func_convert_core_file_wine_to_w32 # func_convert_core_path_wine_to_w32 ARG # Helper function used by path conversion functions when $build is *nix, and # $host is mingw, cygwin, or some other w32 environment. Relies on a correctly # configured wine environment available, with the winepath program in $build's # $PATH. Assumes ARG has no leading or trailing path separator characters. # # ARG is path to be converted from $build format to win32. # Result is available in $func_convert_core_path_wine_to_w32_result. # Unconvertible file (directory) names in ARG are skipped; if no directory names # are convertible, then the result may be empty. func_convert_core_path_wine_to_w32 () { $opt_debug # unfortunately, winepath doesn't convert paths, only file names func_convert_core_path_wine_to_w32_result="" if test -n "$1"; then oldIFS=$IFS IFS=: for func_convert_core_path_wine_to_w32_f in $1; do IFS=$oldIFS func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" if test -n "$func_convert_core_file_wine_to_w32_result" ; then if test -z "$func_convert_core_path_wine_to_w32_result"; then func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" else func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" fi fi done IFS=$oldIFS fi } # end: func_convert_core_path_wine_to_w32 # func_cygpath ARGS... # Wrapper around calling the cygpath program via LT_CYGPATH. This is used when # when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) # $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or # (2), returns the Cygwin file name or path in func_cygpath_result (input # file name or path is assumed to be in w32 format, as previously converted # from $build's *nix or MSYS format). In case (3), returns the w32 file name # or path in func_cygpath_result (input file name or path is assumed to be in # Cygwin format). Returns an empty string on error. # # ARGS are passed to cygpath, with the last one being the file name or path to # be converted. # # Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH # environment variable; do not put it in $PATH. func_cygpath () { $opt_debug if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` if test "$?" -ne 0; then # on failure, ensure result is empty func_cygpath_result= fi else func_cygpath_result= func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" fi } #end: func_cygpath # func_convert_core_msys_to_w32 ARG # Convert file name or path ARG from MSYS format to w32 format. Return # result in func_convert_core_msys_to_w32_result. func_convert_core_msys_to_w32 () { $opt_debug # awkward: cmd appends spaces to result func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` } #end: func_convert_core_msys_to_w32 # func_convert_file_check ARG1 ARG2 # Verify that ARG1 (a file name in $build format) was converted to $host # format in ARG2. Otherwise, emit an error message, but continue (resetting # func_to_host_file_result to ARG1). func_convert_file_check () { $opt_debug if test -z "$2" && test -n "$1" ; then func_error "Could not determine host file name corresponding to" func_error " \`$1'" func_error "Continuing, but uninstalled executables may not work." # Fallback: func_to_host_file_result="$1" fi } # end func_convert_file_check # func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH # Verify that FROM_PATH (a path in $build format) was converted to $host # format in TO_PATH. Otherwise, emit an error message, but continue, resetting # func_to_host_file_result to a simplistic fallback value (see below). func_convert_path_check () { $opt_debug if test -z "$4" && test -n "$3"; then func_error "Could not determine the host path corresponding to" func_error " \`$3'" func_error "Continuing, but uninstalled executables may not work." # Fallback. This is a deliberately simplistic "conversion" and # should not be "improved". See libtool.info. if test "x$1" != "x$2"; then lt_replace_pathsep_chars="s|$1|$2|g" func_to_host_path_result=`echo "$3" | $SED -e "$lt_replace_pathsep_chars"` else func_to_host_path_result="$3" fi fi } # end func_convert_path_check # func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG # Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT # and appending REPL if ORIG matches BACKPAT. func_convert_path_front_back_pathsep () { $opt_debug case $4 in $1 ) func_to_host_path_result="$3$func_to_host_path_result" ;; esac case $4 in $2 ) func_append func_to_host_path_result "$3" ;; esac } # end func_convert_path_front_back_pathsep ################################################## # $build to $host FILE NAME CONVERSION FUNCTIONS # ################################################## # invoked via `$to_host_file_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # Result will be available in $func_to_host_file_result. # func_to_host_file ARG # Converts the file name ARG from $build format to $host format. Return result # in func_to_host_file_result. func_to_host_file () { $opt_debug $to_host_file_cmd "$1" } # end func_to_host_file # func_to_tool_file ARG LAZY # converts the file name ARG from $build format to toolchain format. Return # result in func_to_tool_file_result. If the conversion in use is listed # in (the comma separated) LAZY, no conversion takes place. func_to_tool_file () { $opt_debug case ,$2, in *,"$to_tool_file_cmd",*) func_to_tool_file_result=$1 ;; *) $to_tool_file_cmd "$1" func_to_tool_file_result=$func_to_host_file_result ;; esac } # end func_to_tool_file # func_convert_file_noop ARG # Copy ARG to func_to_host_file_result. func_convert_file_noop () { func_to_host_file_result="$1" } # end func_convert_file_noop # func_convert_file_msys_to_w32 ARG # Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_file_result. func_convert_file_msys_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_to_host_file_result="$func_convert_core_msys_to_w32_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_w32 # func_convert_file_cygwin_to_w32 ARG # Convert file name ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_file_cygwin_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then # because $build is cygwin, we call "the" cygpath in $PATH; no need to use # LT_CYGPATH in this case. func_to_host_file_result=`cygpath -m "$1"` fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_cygwin_to_w32 # func_convert_file_nix_to_w32 ARG # Convert file name ARG from *nix to w32 format. Requires a wine environment # and a working winepath. Returns result in func_to_host_file_result. func_convert_file_nix_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_file_wine_to_w32 "$1" func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_w32 # func_convert_file_msys_to_cygwin ARG # Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_file_msys_to_cygwin () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_cygpath -u "$func_convert_core_msys_to_w32_result" func_to_host_file_result="$func_cygpath_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_cygwin # func_convert_file_nix_to_cygwin ARG # Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed # in a wine environment, working winepath, and LT_CYGPATH set. Returns result # in func_to_host_file_result. func_convert_file_nix_to_cygwin () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. func_convert_core_file_wine_to_w32 "$1" func_cygpath -u "$func_convert_core_file_wine_to_w32_result" func_to_host_file_result="$func_cygpath_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_cygwin ############################################# # $build to $host PATH CONVERSION FUNCTIONS # ############################################# # invoked via `$to_host_path_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # The result will be available in $func_to_host_path_result. # # Path separators are also converted from $build format to $host format. If # ARG begins or ends with a path separator character, it is preserved (but # converted to $host format) on output. # # All path conversion functions are named using the following convention: # file name conversion function : func_convert_file_X_to_Y () # path conversion function : func_convert_path_X_to_Y () # where, for any given $build/$host combination the 'X_to_Y' value is the # same. If conversion functions are added for new $build/$host combinations, # the two new functions must follow this pattern, or func_init_to_host_path_cmd # will break. # func_init_to_host_path_cmd # Ensures that function "pointer" variable $to_host_path_cmd is set to the # appropriate value, based on the value of $to_host_file_cmd. to_host_path_cmd= func_init_to_host_path_cmd () { $opt_debug if test -z "$to_host_path_cmd"; then func_stripname 'func_convert_file_' '' "$to_host_file_cmd" to_host_path_cmd="func_convert_path_${func_stripname_result}" fi } # func_to_host_path ARG # Converts the path ARG from $build format to $host format. Return result # in func_to_host_path_result. func_to_host_path () { $opt_debug func_init_to_host_path_cmd $to_host_path_cmd "$1" } # end func_to_host_path # func_convert_path_noop ARG # Copy ARG to func_to_host_path_result. func_convert_path_noop () { func_to_host_path_result="$1" } # end func_convert_path_noop # func_convert_path_msys_to_w32 ARG # Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_path_result. func_convert_path_msys_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # Remove leading and trailing path separator characters from ARG. MSYS # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; # and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result="$func_convert_core_msys_to_w32_result" func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_msys_to_w32 # func_convert_path_cygwin_to_w32 ARG # Convert path ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_path_cygwin_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_cygwin_to_w32 # func_convert_path_nix_to_w32 ARG # Convert path ARG from *nix to w32 format. Requires a wine environment and # a working winepath. Returns result in func_to_host_file_result. func_convert_path_nix_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_nix_to_w32 # func_convert_path_msys_to_cygwin ARG # Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_path_msys_to_cygwin () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_msys_to_w32_result" func_to_host_path_result="$func_cygpath_result" func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_msys_to_cygwin # func_convert_path_nix_to_cygwin ARG # Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a # a wine environment, working winepath, and LT_CYGPATH set. Returns result in # func_to_host_file_result. func_convert_path_nix_to_cygwin () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # Remove leading and trailing path separator characters from # ARG. msys behavior is inconsistent here, cygpath turns them # into '.;' and ';.', and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" func_to_host_path_result="$func_cygpath_result" func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_nix_to_cygwin # func_mode_compile arg... func_mode_compile () { $opt_debug # Get the compilation command and the source file. base_compile= srcfile="$nonopt" # always keep a non-empty value in "srcfile" suppress_opt=yes suppress_output= arg_mode=normal libobj= later= pie_flag= for arg do case $arg_mode in arg ) # do not "continue". Instead, add this to base_compile lastarg="$arg" arg_mode=normal ;; target ) libobj="$arg" arg_mode=normal continue ;; normal ) # Accept any command-line options. case $arg in -o) test -n "$libobj" && \ func_fatal_error "you cannot specify \`-o' more than once" arg_mode=target continue ;; -pie | -fpie | -fPIE) func_append pie_flag " $arg" continue ;; -shared | -static | -prefer-pic | -prefer-non-pic) func_append later " $arg" continue ;; -no-suppress) suppress_opt=no continue ;; -Xcompiler) arg_mode=arg # the next one goes into the "base_compile" arg list continue # The current "srcfile" will either be retained or ;; # replaced later. I would guess that would be a bug. -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result lastarg= save_ifs="$IFS"; IFS=',' for arg in $args; do IFS="$save_ifs" func_append_quoted lastarg "$arg" done IFS="$save_ifs" func_stripname ' ' '' "$lastarg" lastarg=$func_stripname_result # Add the arguments to base_compile. func_append base_compile " $lastarg" continue ;; *) # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # lastarg="$srcfile" srcfile="$arg" ;; esac # case $arg ;; esac # case $arg_mode # Aesthetically quote the previous argument. func_append_quoted base_compile "$lastarg" done # for arg case $arg_mode in arg) func_fatal_error "you must specify an argument for -Xcompile" ;; target) func_fatal_error "you must specify a target with \`-o'" ;; *) # Get the name of the library object. test -z "$libobj" && { func_basename "$srcfile" libobj="$func_basename_result" } ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo case $libobj in *.[cCFSifmso] | \ *.ada | *.adb | *.ads | *.asm | \ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup) func_xform "$libobj" libobj=$func_xform_result ;; esac case $libobj in *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; *) func_fatal_error "cannot determine name of library object from \`$libobj'" ;; esac func_infer_tag $base_compile for arg in $later; do case $arg in -shared) test "$build_libtool_libs" != yes && \ func_fatal_configuration "can not build a shared library" build_old_libs=no continue ;; -static) build_libtool_libs=no build_old_libs=yes continue ;; -prefer-pic) pic_mode=yes continue ;; -prefer-non-pic) pic_mode=no continue ;; esac done func_quote_for_eval "$libobj" test "X$libobj" != "X$func_quote_for_eval_result" \ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ && func_warning "libobj name \`$libobj' may not contain shell special characters." func_dirname_and_basename "$obj" "/" "" objname="$func_basename_result" xdir="$func_dirname_result" lobj=${xdir}$objdir/$objname test -z "$base_compile" && \ func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. if test "$build_old_libs" = yes; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" fi # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in cygwin* | mingw* | pw32* | os2* | cegcc*) pic_mode=default ;; esac if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" else output_obj= need_locks=no lockfile= fi # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then $ECHO "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi func_append removelist " $output_obj" $ECHO "$srcfile" > "$lockfile" fi $opt_dry_run || $RM $removelist func_append removelist " $lockfile" trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 srcfile=$func_to_tool_file_result func_quote_for_eval "$srcfile" qsrcfile=$func_quote_for_eval_result # Only build a PIC object if we are building libtool libraries. if test "$build_libtool_libs" = yes; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile if test "$pic_mode" != no; then command="$base_compile $qsrcfile $pic_flag" else # Don't build PIC code command="$base_compile $qsrcfile" fi func_mkdir_p "$xdir$objdir" if test -z "$output_obj"; then # Place PIC objects in $objdir func_append command " -o $lobj" fi func_show_eval_locale "$command" \ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then func_show_eval '$MV "$output_obj" "$lobj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi # Allow error messages only from the first compilation. if test "$suppress_opt" = yes; then suppress_output=' >/dev/null 2>&1' fi fi # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then if test "$pic_mode" != yes; then # Don't build PIC code command="$base_compile $qsrcfile$pie_flag" else command="$base_compile $qsrcfile $pic_flag" fi if test "$compiler_c_o" = yes; then func_append command " -o $obj" fi # Suppress compiler output if we already did a PIC compilation. func_append command "$suppress_output" func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then func_show_eval '$MV "$output_obj" "$obj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi fi $opt_dry_run || { func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" # Unlock the critical section if it was locked if test "$need_locks" != no; then removelist=$lockfile $RM "$lockfile" fi } exit $EXIT_SUCCESS } $opt_help || { test "$opt_mode" = compile && func_mode_compile ${1+"$@"} } func_mode_help () { # We need to display help for each of the modes. case $opt_mode in "") # Generic help is extracted from the usage comments # at the start of this file. func_help ;; clean) $ECHO \ "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; compile) $ECHO \ "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -no-suppress do not suppress compiler output for multiple passes -prefer-pic try to build PIC objects only -prefer-non-pic try to build non-PIC objects only -shared do not build a \`.o' file suitable for static linking -static only build a \`.o' file suitable for static linking -Wc,FLAG pass FLAG directly to the compiler COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix \`.c' with the library object suffix, \`.lo'." ;; execute) $ECHO \ "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to \`-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $ECHO \ "Usage: $progname [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the \`--dry-run' option if you just want to see what would be executed." ;; install) $ECHO \ "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the \`install' or \`cp' program. The following components of INSTALL-COMMAND are treated specially: -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $ECHO \ "Usage: $progname [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible -bindir BINDIR specify path to binaries directory (for systems where libraries must be found in the PATH setting at runtime) -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened -no-fast-install disable the fast-install mode -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -objectlist FILE Use a list of object files found in FILE to specify objects -precious-files-regex REGEX don't remove output files matching REGEX -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -shared only do dynamic linking of libtool libraries -shrext SUFFIX override the standard shared library file extension -static do not do any dynamic linking of uninstalled libtool libraries -static-libtool-libs do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] -weak LIBNAME declare that the target provides the LIBNAME interface -Wc,FLAG -Xcompiler FLAG pass linker-specific FLAG directly to the compiler -Wl,FLAG -Xlinker FLAG pass linker-specific FLAG directly to the linker -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) All other options (arguments beginning with \`-') are ignored. Every other argument is treated as a filename. Files ending in \`.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only library objects (\`.lo' files) may be specified, and \`-rpath' is required, except when creating a convenience library. If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created using \`ar' and \`ranlib', or on Windows using \`lib'. If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $ECHO \ "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) func_fatal_help "invalid operation mode \`$opt_mode'" ;; esac echo $ECHO "Try \`$progname --help' for more information about other modes." } # Now that we've collected a possible --mode arg, show help if necessary if $opt_help; then if test "$opt_help" = :; then func_mode_help else { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do func_mode_help done } | sed -n '1p; 2,$s/^Usage:/ or: /p' { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do echo func_mode_help done } | sed '1d /^When reporting/,/^Report/{ H d } $x /information about other modes/d /more detailed .*MODE/d s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' fi exit $? fi # func_mode_execute arg... func_mode_execute () { $opt_debug # The first argument is the command name. cmd="$nonopt" test -z "$cmd" && \ func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. for file in $opt_dlopen; do test -f "$file" \ || func_fatal_help "\`$file' is not a file" dir= case $file in *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$lib' is not a valid libtool archive" # Read the libtool library. dlname= library_names= func_source "$file" # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && \ func_warning "\`$file' was not linked with \`-export-dynamic'" continue fi func_dirname "$file" "" "." dir="$func_dirname_result" if test -f "$dir/$objdir/$dlname"; then func_append dir "/$objdir" else if test ! -f "$dir/$dlname"; then func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" fi fi ;; *.lo) # Just add the directory containing the .lo file. func_dirname "$file" "" "." dir="$func_dirname_result" ;; *) func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir="$absdir" # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic="$magic" # Check if any of the arguments is a wrapper script. args= for file do case $file in -* | *.la | *.lo ) ;; *) # Do a test to see if this is really a libtool program. if func_ltwrapper_script_p "$file"; then func_source "$file" # Transform arg to wrapped name. file="$progdir/$program" elif func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" func_source "$func_ltwrapper_scriptname_result" # Transform arg to wrapped name. file="$progdir/$program" fi ;; esac # Quote arguments (to preserve shell metacharacters). func_append_quoted args "$file" done if test "X$opt_dry_run" = Xfalse; then if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" fi # Restore saved environment variables for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${save_$lt_var+set}\" = set; then $lt_var=\$save_$lt_var; export $lt_var else $lt_unset $lt_var fi" done # Now prepare to actually exec the command. exec_cmd="\$cmd$args" else # Display what would be done. if test -n "$shlibpath_var"; then eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" echo "export $shlibpath_var" fi $ECHO "$cmd$args" exit $EXIT_SUCCESS fi } test "$opt_mode" = execute && func_mode_execute ${1+"$@"} # func_mode_finish arg... func_mode_finish () { $opt_debug libs= libdirs= admincmds= for opt in "$nonopt" ${1+"$@"} do if test -d "$opt"; then func_append libdirs " $opt" elif test -f "$opt"; then if func_lalib_unsafe_p "$opt"; then func_append libs " $opt" else func_warning "\`$opt' is not a valid libtool archive" fi else func_fatal_error "invalid argument \`$opt'" fi done if test -n "$libs"; then if test -n "$lt_sysroot"; then sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" else sysroot_cmd= fi # Remove sysroot references if $opt_dry_run; then for lib in $libs; do echo "removing references to $lt_sysroot and \`=' prefixes from $lib" done else tmpdir=`func_mktempdir` for lib in $libs; do sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ > $tmpdir/tmp-la mv -f $tmpdir/tmp-la $lib done ${RM}r "$tmpdir" fi fi if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. func_execute_cmds "$finish_cmds" 'admincmds="$admincmds '"$cmd"'"' fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $opt_dry_run || eval "$cmds" || func_append admincmds " $cmds" fi done fi # Exit here if they wanted silent mode. $opt_silent && exit $EXIT_SUCCESS if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then echo "----------------------------------------------------------------------" echo "Libraries have been installed in:" for libdir in $libdirs; do $ECHO " $libdir" done echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" echo "specify the full pathname of the library, or use the \`-LLIBDIR'" echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then echo " - add LIBDIR to the \`$shlibpath_var' environment variable" echo " during execution" fi if test -n "$runpath_var"; then echo " - add LIBDIR to the \`$runpath_var' environment variable" echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" $ECHO " - use the \`$flag' linker flag" fi if test -n "$admincmds"; then $ECHO " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi echo echo "See any operating system documentation about shared libraries for" case $host in solaris2.[6789]|solaris2.1[0-9]) echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" echo "pages." ;; *) echo "more information, such as the ld(1) and ld.so(8) manual pages." ;; esac echo "----------------------------------------------------------------------" fi exit $EXIT_SUCCESS } test "$opt_mode" = finish && func_mode_finish ${1+"$@"} # func_mode_install arg... func_mode_install () { $opt_debug # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. case $nonopt in *shtool*) :;; *) false;; esac; then # Aesthetically quote it. func_quote_for_eval "$nonopt" install_prog="$func_quote_for_eval_result " arg=$1 shift else install_prog= arg=$nonopt fi # The real first argument should be the name of the installation program. # Aesthetically quote it. func_quote_for_eval "$arg" func_append install_prog "$func_quote_for_eval_result" install_shared_prog=$install_prog case " $install_prog " in *[\\\ /]cp\ *) install_cp=: ;; *) install_cp=false ;; esac # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir=no stripme= no_mode=: for arg do arg2= if test -n "$dest"; then func_append files " $dest" dest=$arg continue fi case $arg in -d) isdir=yes ;; -f) if $install_cp; then :; else prev=$arg fi ;; -g | -m | -o) prev=$arg ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then if test "x$prev" = x-m && test -n "$install_override_mode"; then arg2=$install_override_mode no_mode=false fi prev= else dest=$arg continue fi ;; esac # Aesthetically quote the argument. func_quote_for_eval "$arg" func_append install_prog " $func_quote_for_eval_result" if test -n "$arg2"; then func_quote_for_eval "$arg2" fi func_append install_shared_prog " $func_quote_for_eval_result" done test -z "$install_prog" && \ func_fatal_help "you must specify an install program" test -n "$prev" && \ func_fatal_help "the \`$prev' option requires an argument" if test -n "$install_override_mode" && $no_mode; then if $install_cp; then :; else func_quote_for_eval "$install_override_mode" func_append install_shared_prog " -m $func_quote_for_eval_result" fi fi if test -z "$files"; then if test -z "$dest"; then func_fatal_help "no file or destination specified" else func_fatal_help "you must specify a destination" fi fi # Strip any trailing slash from the destination. func_stripname '' '/' "$dest" dest=$func_stripname_result # Check to see that the destination is a directory. test -d "$dest" && isdir=yes if test "$isdir" = yes; then destdir="$dest" destname= else func_dirname_and_basename "$dest" "" "." destdir="$func_dirname_result" destname="$func_basename_result" # Not a directory, so check to see that there is only one file specified. set dummy $files; shift test "$#" -gt 1 && \ func_fatal_help "\`$dest' is not a directory" fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do case $file in *.lo) ;; *) func_fatal_help "\`$destdir' must be an absolute directory name" ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case $file in *.$libext) # Do the static libraries later. func_append staticlibs " $file" ;; *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$file' is not a valid libtool archive" library_names= old_library= relink_command= func_source "$file" # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) func_append current_libdirs " $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) func_append future_libdirs " $libdir" ;; esac fi func_dirname "$file" "/" "" dir="$func_dirname_result" func_append dir "$objdir" if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that # are installed to the same prefix. # At present, this check doesn't affect windows .dll's that # are installed into $libdir/../bin (currently, that works fine) # but it's something to keep an eye on. test "$inst_prefix_dir" = "$destdir" && \ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` else relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` fi func_warning "relinking \`$file'" func_show_eval "$relink_command" \ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' fi # See the names of the shared library. set dummy $library_names; shift if test -n "$1"; then realname="$1" shift srcname="$realname" test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ 'exit $?' tstripme="$stripme" case $host_os in cygwin* | mingw* | pw32* | cegcc*) case $realname in *.dll.a) tstripme="" ;; esac ;; esac if test -n "$tstripme" && test -n "$striplib"; then func_show_eval "$striplib $destdir/$realname" 'exit $?' fi if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. # Try `ln -sf' first, because the `ln' binary might depend on # the symlink we replace! Solaris /bin/ln does not understand -f, # so we also need to try rm && ln -s. for linkname do test "$linkname" != "$realname" \ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" done fi # Do each command in the postinstall commands. lib="$destdir/$realname" func_execute_cmds "$postinstall_cmds" 'exit $?' fi # Install the pseudo-library for information purposes. func_basename "$file" name="$func_basename_result" instname="$dir/$name"i func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. test -n "$old_library" && func_append staticlibs " $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # Deduce the name of the destination old-style object file. case $destfile in *.lo) func_lo2o "$destfile" staticdest=$func_lo2o_result ;; *.$objext) staticdest="$destfile" destfile= ;; *) func_fatal_help "cannot copy a libtool object to \`$destfile'" ;; esac # Install the libtool object if requested. test -n "$destfile" && \ func_show_eval "$install_prog $file $destfile" 'exit $?' # Install the old object if enabled. if test "$build_old_libs" = yes; then # Deduce the name of the old-style object file. func_lo2o "$file" staticobj=$func_lo2o_result func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' fi exit $EXIT_SUCCESS ;; *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # If the file is missing, and there is a .exe on the end, strip it # because it is most likely a libtool script we actually want to # install stripped_ext="" case $file in *.exe) if test ! -f "$file"; then func_stripname '' '.exe' "$file" file=$func_stripname_result stripped_ext=".exe" fi ;; esac # Do a test to see if this is really a libtool program. case $host in *cygwin* | *mingw*) if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" wrapper=$func_ltwrapper_scriptname_result else func_stripname '' '.exe' "$file" wrapper=$func_stripname_result fi ;; *) wrapper=$file ;; esac if func_ltwrapper_script_p "$wrapper"; then notinst_deplibs= relink_command= func_source "$wrapper" # Check the variables that should have been set. test -z "$generated_by_libtool_version" && \ func_fatal_error "invalid libtool wrapper script \`$wrapper'" finalize=yes for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then func_source "$lib" fi libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then func_warning "\`$lib' has not been installed in \`$libdir'" finalize=no fi done relink_command= func_source "$wrapper" outputname= if test "$fast_install" = no && test -n "$relink_command"; then $opt_dry_run || { if test "$finalize" = yes; then tmpdir=`func_mktempdir` func_basename "$file$stripped_ext" file="$func_basename_result" outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` $opt_silent || { func_quote_for_expand "$relink_command" eval "func_echo $func_quote_for_expand_result" } if eval "$relink_command"; then : else func_error "error: relink \`$file' with the above command before installing it" $opt_dry_run || ${RM}r "$tmpdir" continue fi file="$outputname" else func_warning "cannot relink \`$file'" fi } else # Install the binary that we compiled earlier. file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyway case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok ;; *.exe:*) destfile=$destfile.exe ;; *:*.exe) func_stripname '' '.exe' "$destfile" destfile=$func_stripname_result ;; esac ;; esac func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' $opt_dry_run || if test -n "$outputname"; then ${RM}r "$tmpdir" fi ;; esac done for file in $staticlibs; do func_basename "$file" name="$func_basename_result" # Set up the ranlib parameters. oldlib="$destdir/$name" func_show_eval "$install_prog \$file \$oldlib" 'exit $?' if test -n "$stripme" && test -n "$old_striplib"; then func_show_eval "$old_striplib $oldlib" 'exit $?' fi # Do each command in the postinstall commands. func_execute_cmds "$old_postinstall_cmds" 'exit $?' done test -n "$future_libdirs" && \ func_warning "remember to run \`$progname --finish$future_libdirs'" if test -n "$current_libdirs"; then # Maybe just do a dry run. $opt_dry_run && current_libdirs=" -n$current_libdirs" exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' else exit $EXIT_SUCCESS fi } test "$opt_mode" = install && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p # Extract symbols from dlprefiles and create ${outputname}S.o with # a dlpreopen symbol table. func_generate_dlsyms () { $opt_debug my_outputname="$1" my_originator="$2" my_pic_p="${3-no}" my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` my_dlsyms= if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then if test -n "$NM" && test -n "$global_symbol_pipe"; then my_dlsyms="${my_outputname}S.c" else func_error "not configured to extract global symbols from dlpreopened files" fi fi if test -n "$my_dlsyms"; then case $my_dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. nlist="$output_objdir/${my_outputname}.nm" func_show_eval "$RM $nlist ${nlist}S ${nlist}T" # Parse the name list into a source file. func_verbose "creating $output_objdir/$my_dlsyms" $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ #ifdef __cplusplus extern \"C\" { #endif #if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) #pragma GCC diagnostic ignored \"-Wstrict-prototypes\" #endif /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif /* External symbol declarations for the compiler. */\ " if test "$dlself" = yes; then func_verbose "generating symbol list for \`$output'" $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` for progfile in $progfiles; do func_to_tool_file "$progfile" func_convert_file_msys_to_w32 func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then $opt_dry_run || { eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi if test -n "$export_symbols_regex"; then $opt_dry_run || { eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi # Prepare the list of exported symbols if test -z "$export_symbols"; then export_symbols="$output_objdir/$outputname.exp" $opt_dry_run || { $RM $export_symbols eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ;; esac } else $opt_dry_run || { eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; esac } fi fi for dlprefile in $dlprefiles; do func_verbose "extracting global C symbols from \`$dlprefile'" func_basename "$dlprefile" name="$func_basename_result" case $host in *cygwin* | *mingw* | *cegcc* ) # if an import library, we need to obtain dlname if func_win32_import_lib_p "$dlprefile"; then func_tr_sh "$dlprefile" eval "curr_lafile=\$libfile_$func_tr_sh_result" dlprefile_dlbasename="" if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then # Use subshell, to avoid clobbering current variable values dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` if test -n "$dlprefile_dlname" ; then func_basename "$dlprefile_dlname" dlprefile_dlbasename="$func_basename_result" else # no lafile. user explicitly requested -dlpreopen . $sharedlib_from_linklib_cmd "$dlprefile" dlprefile_dlbasename=$sharedlib_from_linklib_result fi fi $opt_dry_run || { if test -n "$dlprefile_dlbasename" ; then eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' else func_warning "Could not compute DLL name from $name" eval '$ECHO ": $name " >> "$nlist"' fi func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" } else # not an import lib $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } fi ;; *) $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } ;; esac done $opt_dry_run || { # Make sure we have at least an empty file. test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $MV "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. if $GREP -v "^: " < "$nlist" | if sort -k 3 /dev/null 2>&1; then sort -k 3 else sort +2 fi | uniq > "$nlist"S; then : else $GREP -v "^: " < "$nlist" > "$nlist"S fi if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' else echo '/* NONE */' >> "$output_objdir/$my_dlsyms" fi echo >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ typedef struct { const char *name; void *address; } lt_dlsymlist; extern LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[]; LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = {\ { \"$my_originator\", (void *) 0 }," case $need_lib_prefix in no) eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; *) eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; esac echo >> "$output_objdir/$my_dlsyms" "\ {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt_${my_prefix}_LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif\ " } # !$opt_dry_run pic_flag_for_symtable= case "$compile_command " in *" -static "*) ;; *) case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; *-*-hpux*) pic_flag_for_symtable=" $pic_flag" ;; *) if test "X$my_pic_p" != Xno; then pic_flag_for_symtable=" $pic_flag" fi ;; esac ;; esac symtab_cflags= for arg in $LTCFLAGS; do case $arg in -pie | -fpie | -fPIE) ;; *) func_append symtab_cflags " $arg" ;; esac done # Now compile the dynamic symbol file. func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' # Clean up the generated files. func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' # Transform the symbol file into the correct name. symfileobj="$output_objdir/${my_outputname}S.$objext" case $host in *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` else compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` fi ;; *) compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` ;; esac ;; *) func_fatal_error "unknown suffix for \`$my_dlsyms'" ;; esac else # We keep going just in case the user didn't refer to # lt_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. # Nullify the symbol file. compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` fi } # func_win32_libid arg # return the library type of file 'arg' # # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. # Despite the name, also deal with 64 bit binaries. func_win32_libid () { $opt_debug win32_libid_type="unknown" win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in *ar\ archive\ import\ library*) # definitely import win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then func_to_tool_file "$1" func_convert_file_msys_to_w32 win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | $SED -n -e ' 1,100{ / I /{ s,.*,import, p q } }'` case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; esac fi ;; *DLL*) win32_libid_type="x86 DLL" ;; *executable*) # but shell scripts are "executable" too... case $win32_fileres in *MS\ Windows\ PE\ Intel*) win32_libid_type="x86 DLL" ;; esac ;; esac $ECHO "$win32_libid_type" } # func_cygming_dll_for_implib ARG # # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib () { $opt_debug sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` } # func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs # # The is the core of a fallback implementation of a # platform-specific function to extract the name of the # DLL associated with the specified import library LIBNAME. # # SECTION_NAME is either .idata$6 or .idata$7, depending # on the platform and compiler that created the implib. # # Echos the name of the DLL associated with the # specified import library. func_cygming_dll_for_implib_fallback_core () { $opt_debug match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` $OBJDUMP -s --section "$1" "$2" 2>/dev/null | $SED '/^Contents of section '"$match_literal"':/{ # Place marker at beginning of archive member dllname section s/.*/====MARK====/ p d } # These lines can sometimes be longer than 43 characters, but # are always uninteresting /:[ ]*file format pe[i]\{,1\}-/d /^In archive [^:]*:/d # Ensure marker is printed /^====MARK====/p # Remove all lines with less than 43 characters /^.\{43\}/!d # From remaining lines, remove first 43 characters s/^.\{43\}//' | $SED -n ' # Join marker and all lines until next marker into a single line /^====MARK====/ b para H $ b para b :para x s/\n//g # Remove the marker s/^====MARK====// # Remove trailing dots and whitespace s/[\. \t]*$// # Print /./p' | # we now have a list, one entry per line, of the stringified # contents of the appropriate section of all members of the # archive which possess that section. Heuristic: eliminate # all those which have a first or second character that is # a '.' (that is, objdump's representation of an unprintable # character.) This should work for all archives with less than # 0x302f exports -- but will fail for DLLs whose name actually # begins with a literal '.' or a single character followed by # a '.'. # # Of those that remain, print the first one. $SED -e '/^\./d;/^.\./d;q' } # func_cygming_gnu_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is a GNU/binutils-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_gnu_implib_p () { $opt_debug func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` test -n "$func_cygming_gnu_implib_tmp" } # func_cygming_ms_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is an MS-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_ms_implib_p () { $opt_debug func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` test -n "$func_cygming_ms_implib_tmp" } # func_cygming_dll_for_implib_fallback ARG # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # # This fallback implementation is for use when $DLLTOOL # does not support the --identify-strict option. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib_fallback () { $opt_debug if func_cygming_gnu_implib_p "$1" ; then # binutils import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` elif func_cygming_ms_implib_p "$1" ; then # ms-generated import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` else # unknown sharedlib_from_linklib_result="" fi } # func_extract_an_archive dir oldlib func_extract_an_archive () { $opt_debug f_ex_an_ar_dir="$1"; shift f_ex_an_ar_oldlib="$1" if test "$lock_old_archive_extraction" = yes; then lockfile=$f_ex_an_ar_oldlib.lock until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done fi func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ 'stat=$?; rm -f "$lockfile"; exit $stat' if test "$lock_old_archive_extraction" = yes; then $opt_dry_run || rm -f "$lockfile" fi if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" fi } # func_extract_archives gentop oldlib ... func_extract_archives () { $opt_debug my_gentop="$1"; shift my_oldlibs=${1+"$@"} my_oldobjs="" my_xlib="" my_xabs="" my_xdir="" for my_xlib in $my_oldlibs; do # Extract the objects. case $my_xlib in [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac func_basename "$my_xlib" my_xlib="$func_basename_result" my_xlib_u=$my_xlib while :; do case " $extracted_archives " in *" $my_xlib_u "*) func_arith $extracted_serial + 1 extracted_serial=$func_arith_result my_xlib_u=lt$extracted_serial-$my_xlib ;; *) break ;; esac done extracted_archives="$extracted_archives $my_xlib_u" my_xdir="$my_gentop/$my_xlib_u" func_mkdir_p "$my_xdir" case $host in *-darwin*) func_verbose "Extracting $my_xabs" # Do not bother doing anything if just a dry run $opt_dry_run || { darwin_orig_dir=`pwd` cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` darwin_base_archive=`basename "$darwin_archive"` darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` if test -n "$darwin_arches"; then darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" for darwin_arch in $darwin_arches ; do func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" func_extract_an_archive "`pwd`" "${darwin_base_archive}" cd "$darwin_curdir" $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" done # $darwin_arches ## Okay now we've a bunch of thin objects, gotta fatten them up :) darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` darwin_file= darwin_files= for darwin_file in $darwin_filelist; do darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` $LIPO -create -output "$darwin_file" $darwin_files done # $darwin_filelist $RM -rf unfat-$$ cd "$darwin_orig_dir" else cd $darwin_orig_dir func_extract_an_archive "$my_xdir" "$my_xabs" fi # $darwin_arches } # !$opt_dry_run ;; *) func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` done func_extract_archives_result="$my_oldobjs" } # func_emit_wrapper [arg=no] # # Emit a libtool wrapper script on stdout. # Don't directly open a file because we may want to # incorporate the script contents within a cygwin/mingw # wrapper executable. Must ONLY be called from within # func_mode_link because it depends on a number of variables # set therein. # # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR # variable will take. If 'yes', then the emitted script # will assume that the directory in which it is stored is # the $objdir directory. This is a cygwin/mingw-specific # behavior. func_emit_wrapper () { func_emit_wrapper_arg1=${1-no} $ECHO "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of the build directory. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. sed_quote_subst='$sed_quote_subst' # Be Bourne compatible if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variables: generated_by_libtool_version='$macro_version' notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$ECHO are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then file=\"\$0\"" qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` $ECHO "\ # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$1 _LTECHO_EOF' } ECHO=\"$qECHO\" fi # Very basic option parsing. These options are (a) specific to # the libtool wrapper, (b) are identical between the wrapper # /script/ and the wrapper /executable/ which is used only on # windows platforms, and (c) all begin with the string "--lt-" # (application programs are unlikely to have options which match # this pattern). # # There are only two supported options: --lt-debug and # --lt-dump-script. There is, deliberately, no --lt-help. # # The first argument to this parsing function should be the # script's $0 value, followed by "$@". lt_option_debug= func_parse_lt_options () { lt_script_arg0=\$0 shift for lt_opt do case \"\$lt_opt\" in --lt-debug) lt_option_debug=1 ;; --lt-dump-script) lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` cat \"\$lt_dump_D/\$lt_dump_F\" exit 0 ;; --lt-*) \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 exit 1 ;; esac done # Print the debug banner immediately: if test -n \"\$lt_option_debug\"; then echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 fi } # Used when --lt-debug. Prints its arguments to stdout # (redirection is the responsibility of the caller) func_lt_dump_args () { lt_dump_args_N=1; for lt_arg do \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` done } # Core function for launching the target application func_exec_program_core () { " case $host in # Backslashes separate directories on plain windows *-*-mingw | *-*-os2* | *-cegcc*) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} " ;; *) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir/\$program\" \${1+\"\$@\"} " ;; esac $ECHO "\ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 exit 1 } # A function to encapsulate launching the target application # Strips options in the --lt-* namespace from \$@ and # launches target application with the remaining arguments. func_exec_program () { for lt_wr_arg do case \$lt_wr_arg in --lt-*) ;; *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; esac shift done func_exec_program_core \${1+\"\$@\"} } # Parse options func_parse_lt_options \"\$0\" \${1+\"\$@\"} # Find the directory that this script lives in. thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` done # Usually 'no', except on cygwin/mingw when embedded into # the cwrapper. WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then # special case for '.' if test \"\$thisdir\" = \".\"; then thisdir=\`pwd\` fi # remove .libs from thisdir case \"\$thisdir\" in *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; $objdir ) thisdir=. ;; esac fi # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" " if test "$fast_install" = yes; then $ECHO "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" if test ! -d \"\$progdir\"; then $MKDIR \"\$progdir\" else $RM \"\$progdir/\$file\" fi" $ECHO "\ # relink executable if necessary if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else $ECHO \"\$relink_command_output\" >&2 $RM \"\$progdir/\$file\" exit 1 fi fi $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || { $RM \"\$progdir/\$program\"; $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } $RM \"\$progdir/\$file\" fi" else $ECHO "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi $ECHO "\ if test -f \"\$progdir/\$program\"; then" # fixup the dll searchpath if we need to. # # Fix the DLL searchpath if we need to. Do this before prepending # to shlibpath, because on Windows, both are PATH and uninstalled # libraries must come first. if test -n "$dllsearchpath"; then $ECHO "\ # Add the dll search path components to the executable PATH PATH=$dllsearchpath:\$PATH " fi # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` export $shlibpath_var " fi $ECHO "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. func_exec_program \${1+\"\$@\"} fi else # The program doesn't exist. \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi fi\ " } # func_emit_cwrapperexe_src # emit the source code for a wrapper executable on stdout # Must ONLY be called from within func_mode_link because # it depends on a number of variable set therein. func_emit_cwrapperexe_src () { cat < #include #ifdef _MSC_VER # include # include # include #else # include # include # ifdef __CYGWIN__ # include # endif #endif #include #include #include #include #include #include #include #include /* declarations of non-ANSI functions */ #if defined(__MINGW32__) # ifdef __STRICT_ANSI__ int _putenv (const char *); # endif #elif defined(__CYGWIN__) # ifdef __STRICT_ANSI__ char *realpath (const char *, char *); int putenv (char *); int setenv (const char *, const char *, int); # endif /* #elif defined (other platforms) ... */ #endif /* portability defines, excluding path handling macros */ #if defined(_MSC_VER) # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv # define S_IXUSR _S_IEXEC # ifndef _INTPTR_T_DEFINED # define _INTPTR_T_DEFINED # define intptr_t int # endif #elif defined(__MINGW32__) # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv #elif defined(__CYGWIN__) # define HAVE_SETENV # define FOPEN_WB "wb" /* #elif defined (other platforms) ... */ #endif #if defined(PATH_MAX) # define LT_PATHMAX PATH_MAX #elif defined(MAXPATHLEN) # define LT_PATHMAX MAXPATHLEN #else # define LT_PATHMAX 1024 #endif #ifndef S_IXOTH # define S_IXOTH 0 #endif #ifndef S_IXGRP # define S_IXGRP 0 #endif /* path handling portability macros */ #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' #endif #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ defined (__OS2__) # define HAVE_DOS_BASED_FILE_SYSTEM # define FOPEN_WB "wb" # ifndef DIR_SEPARATOR_2 # define DIR_SEPARATOR_2 '\\' # endif # ifndef PATH_SEPARATOR_2 # define PATH_SEPARATOR_2 ';' # endif #endif #ifndef DIR_SEPARATOR_2 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) #else /* DIR_SEPARATOR_2 */ # define IS_DIR_SEPARATOR(ch) \ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) #endif /* DIR_SEPARATOR_2 */ #ifndef PATH_SEPARATOR_2 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) #else /* PATH_SEPARATOR_2 */ # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ #ifndef FOPEN_WB # define FOPEN_WB "w" #endif #ifndef _O_BINARY # define _O_BINARY 0 #endif #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ if (stale) { free ((void *) stale); stale = 0; } \ } while (0) #if defined(LT_DEBUGWRAPPER) static int lt_debug = 1; #else static int lt_debug = 0; #endif const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ void *xmalloc (size_t num); char *xstrdup (const char *string); const char *base_name (const char *name); char *find_executable (const char *wrapper); char *chase_symlinks (const char *pathspec); int make_executable (const char *path); int check_executable (const char *path); char *strendzap (char *str, const char *pat); void lt_debugprintf (const char *file, int line, const char *fmt, ...); void lt_fatal (const char *file, int line, const char *message, ...); static const char *nonnull (const char *s); static const char *nonempty (const char *s); void lt_setenv (const char *name, const char *value); char *lt_extend_str (const char *orig_value, const char *add, int to_end); void lt_update_exe_path (const char *name, const char *value); void lt_update_lib_path (const char *name, const char *value); char **prepare_spawn (char **argv); void lt_dump_script (FILE *f); EOF cat <= 0) && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) return 1; else return 0; } int make_executable (const char *path) { int rval = 0; struct stat st; lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", nonempty (path)); if ((!path) || (!*path)) return 0; if (stat (path, &st) >= 0) { rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); } return rval; } /* Searches for the full path of the wrapper. Returns newly allocated full path name if found, NULL otherwise Does not chase symlinks, even on platforms that support them. */ char * find_executable (const char *wrapper) { int has_slash = 0; const char *p; const char *p_next; /* static buffer for getcwd */ char tmp[LT_PATHMAX + 1]; int tmp_len; char *concat_name; lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", nonempty (wrapper)); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; /* Absolute path? */ #if defined (HAVE_DOS_BASED_FILE_SYSTEM) if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } else { #endif if (IS_DIR_SEPARATOR (wrapper[0])) { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } #if defined (HAVE_DOS_BASED_FILE_SYSTEM) } #endif for (p = wrapper; *p; p++) if (*p == '/') { has_slash = 1; break; } if (!has_slash) { /* no slashes; search PATH */ const char *path = getenv ("PATH"); if (path != NULL) { for (p = path; *p; p = p_next) { const char *q; size_t p_len; for (q = p; *q; q++) if (IS_PATH_SEPARATOR (*q)) break; p_len = q - p; p_next = (*q == '\0' ? q : q + 1); if (p_len == 0) { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); } else { concat_name = XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, p, p_len); concat_name[p_len] = '/'; strcpy (concat_name + p_len + 1, wrapper); } if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } } /* not found in PATH; assume curdir */ } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); return NULL; } char * chase_symlinks (const char *pathspec) { #ifndef S_ISLNK return xstrdup (pathspec); #else char buf[LT_PATHMAX]; struct stat s; char *tmp_pathspec = xstrdup (pathspec); char *p; int has_symlinks = 0; while (strlen (tmp_pathspec) && !has_symlinks) { lt_debugprintf (__FILE__, __LINE__, "checking path component for symlinks: %s\n", tmp_pathspec); if (lstat (tmp_pathspec, &s) == 0) { if (S_ISLNK (s.st_mode) != 0) { has_symlinks = 1; break; } /* search backwards for last DIR_SEPARATOR */ p = tmp_pathspec + strlen (tmp_pathspec) - 1; while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) p--; if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) { /* no more DIR_SEPARATORS left */ break; } *p = '\0'; } else { lt_fatal (__FILE__, __LINE__, "error accessing file \"%s\": %s", tmp_pathspec, nonnull (strerror (errno))); } } XFREE (tmp_pathspec); if (!has_symlinks) { return xstrdup (pathspec); } tmp_pathspec = realpath (pathspec, buf); if (tmp_pathspec == 0) { lt_fatal (__FILE__, __LINE__, "could not follow symlinks for %s", pathspec); } return xstrdup (tmp_pathspec); #endif } char * strendzap (char *str, const char *pat) { size_t len, patlen; assert (str != NULL); assert (pat != NULL); len = strlen (str); patlen = strlen (pat); if (patlen <= len) { str += len - patlen; if (strcmp (str, pat) == 0) *str = '\0'; } return str; } void lt_debugprintf (const char *file, int line, const char *fmt, ...) { va_list args; if (lt_debug) { (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); va_start (args, fmt); (void) vfprintf (stderr, fmt, args); va_end (args); } } static void lt_error_core (int exit_status, const char *file, int line, const char *mode, const char *message, va_list ap) { fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); if (exit_status >= 0) exit (exit_status); } void lt_fatal (const char *file, int line, const char *message, ...) { va_list ap; va_start (ap, message); lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); va_end (ap); } static const char * nonnull (const char *s) { return s ? s : "(null)"; } static const char * nonempty (const char *s) { return (s && !*s) ? "(empty)" : nonnull (s); } void lt_setenv (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_setenv) setting '%s' to '%s'\n", nonnull (name), nonnull (value)); { #ifdef HAVE_SETENV /* always make a copy, for consistency with !HAVE_SETENV */ char *str = xstrdup (value); setenv (name, str, 1); #else int len = strlen (name) + 1 + strlen (value) + 1; char *str = XMALLOC (char, len); sprintf (str, "%s=%s", name, value); if (putenv (str) != EXIT_SUCCESS) { XFREE (str); } #endif } } char * lt_extend_str (const char *orig_value, const char *add, int to_end) { char *new_value; if (orig_value && *orig_value) { int orig_value_len = strlen (orig_value); int add_len = strlen (add); new_value = XMALLOC (char, add_len + orig_value_len + 1); if (to_end) { strcpy (new_value, orig_value); strcpy (new_value + orig_value_len, add); } else { strcpy (new_value, add); strcpy (new_value + add_len, orig_value); } } else { new_value = xstrdup (add); } return new_value; } void lt_update_exe_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); /* some systems can't cope with a ':'-terminated path #' */ int len = strlen (new_value); while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) { new_value[len-1] = '\0'; } lt_setenv (name, new_value); XFREE (new_value); } } void lt_update_lib_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); lt_setenv (name, new_value); XFREE (new_value); } } EOF case $host_os in mingw*) cat <<"EOF" /* Prepares an argument vector before calling spawn(). Note that spawn() does not by itself call the command interpreter (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); GetVersionEx(&v); v.dwPlatformId == VER_PLATFORM_WIN32_NT; }) ? "cmd.exe" : "command.com"). Instead it simply concatenates the arguments, separated by ' ', and calls CreateProcess(). We must quote the arguments since Win32 CreateProcess() interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a special way: - Space and tab are interpreted as delimiters. They are not treated as delimiters if they are surrounded by double quotes: "...". - Unescaped double quotes are removed from the input. Their only effect is that within double quotes, space and tab are treated like normal characters. - Backslashes not followed by double quotes are not special. - But 2*n+1 backslashes followed by a double quote become n backslashes followed by a double quote (n >= 0): \" -> " \\\" -> \" \\\\\" -> \\" */ #define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" #define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" char ** prepare_spawn (char **argv) { size_t argc; char **new_argv; size_t i; /* Count number of arguments. */ for (argc = 0; argv[argc] != NULL; argc++) ; /* Allocate new argument vector. */ new_argv = XMALLOC (char *, argc + 1); /* Put quoted arguments into the new argument vector. */ for (i = 0; i < argc; i++) { const char *string = argv[i]; if (string[0] == '\0') new_argv[i] = xstrdup ("\"\""); else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) { int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); size_t length; unsigned int backslashes; const char *s; char *quoted_string; char *p; length = 0; backslashes = 0; if (quote_around) length++; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') length += backslashes + 1; length++; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) length += backslashes + 1; quoted_string = XMALLOC (char, length + 1); p = quoted_string; backslashes = 0; if (quote_around) *p++ = '"'; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') { unsigned int j; for (j = backslashes + 1; j > 0; j--) *p++ = '\\'; } *p++ = c; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) { unsigned int j; for (j = backslashes; j > 0; j--) *p++ = '\\'; *p++ = '"'; } *p = '\0'; new_argv[i] = quoted_string; } else new_argv[i] = (char *) string; } new_argv[argc] = NULL; return new_argv; } EOF ;; esac cat <<"EOF" void lt_dump_script (FILE* f) { EOF func_emit_wrapper yes | $SED -e 's/\([\\"]\)/\\\1/g' \ -e 's/^/ fputs ("/' -e 's/$/\\n", f);/' cat <<"EOF" } EOF } # end: func_emit_cwrapperexe_src # func_win32_import_lib_p ARG # True if ARG is an import lib, as indicated by $file_magic_cmd func_win32_import_lib_p () { $opt_debug case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in *import*) : ;; *) false ;; esac } # func_mode_link arg... func_mode_link () { $opt_debug case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # which system we are compiling for in order to pass an extra # flag for every libtool invocation. # allow_undefined=no # FIXME: Unfortunately, there are problems with the above when trying # to make a dll which has undefined symbols, in which case not # even a static library is built. For now, we need to specify # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. allow_undefined=yes ;; *) allow_undefined=yes ;; esac libtool_args=$nonopt base_compile="$nonopt $@" compile_command=$nonopt finalize_command=$nonopt compile_rpath= finalize_rpath= compile_shlibpath= finalize_shlibpath= convenience= old_convenience= deplibs= old_deplibs= compiler_flags= linker_flags= dllsearchpath= lib_search_path=`pwd` inst_prefix_dir= new_inherited_linker_flags= avoid_version=no bindir= dlfiles= dlprefiles= dlself=no export_dynamic=no export_symbols= export_symbols_regex= generated= libobjs= ltlibs= module=no no_install=no objs= non_pic_objects= precious_files_regex= prefer_static_libs=no preload=no prev= prevarg= release= rpath= xrpath= perm_rpath= temp_rpath= thread_safe=no vinfo= vinfo_number=no weak_libs= single_module="${wl}-single_module" func_infer_tag $base_compile # We need to know -static, to get the right output filenames. for arg do case $arg in -shared) test "$build_libtool_libs" != yes && \ func_fatal_configuration "can not build a shared library" build_old_libs=no break ;; -all-static | -static | -static-libtool-libs) case $arg in -all-static) if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then func_warning "complete static linking is impossible in this configuration" fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; -static) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=built ;; -static-libtool-libs) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; esac build_libtool_libs=no build_old_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. while test "$#" -gt 0; do arg="$1" shift func_quote_for_eval "$arg" qarg=$func_quote_for_eval_unquoted_result func_append libtool_args " $func_quote_for_eval_result" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) func_append compile_command " @OUTPUT@" func_append finalize_command " @OUTPUT@" ;; esac case $prev in bindir) bindir="$arg" prev= continue ;; dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. func_append compile_command " @SYMFILE@" func_append finalize_command " @SYMFILE@" preload=yes fi case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test "$dlself" = no; then dlself=needless export_dynamic=yes fi prev= continue ;; self) if test "$prev" = dlprefiles; then dlself=yes elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then dlself=yes else dlself=needless export_dynamic=yes fi prev= continue ;; *) if test "$prev" = dlfiles; then func_append dlfiles " $arg" else func_append dlprefiles " $arg" fi prev= continue ;; esac ;; expsyms) export_symbols="$arg" test -f "$arg" \ || func_fatal_error "symbol file \`$arg' does not exist" prev= continue ;; expsyms_regex) export_symbols_regex="$arg" prev= continue ;; framework) case $host in *-*-darwin*) case "$deplibs " in *" $qarg.ltframework "*) ;; *) func_append deplibs " $qarg.ltframework" # this is fixed later ;; esac ;; esac prev= continue ;; inst_prefix) inst_prefix_dir="$arg" prev= continue ;; objectlist) if test -f "$arg"; then save_arg=$arg moreargs= for fil in `cat "$save_arg"` do # func_append moreargs " $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then func_append dlfiles " $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi done else func_fatal_error "link input file \`$arg' does not exist" fi arg=$save_arg prev= continue ;; precious_regex) precious_files_regex="$arg" prev= continue ;; release) release="-$arg" prev= continue ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; *) func_append rpath " $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; *) func_append xrpath " $arg" ;; esac fi prev= continue ;; shrext) shrext_cmds="$arg" prev= continue ;; weak) func_append weak_libs " $arg" prev= continue ;; xcclinker) func_append linker_flags " $qarg" func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xcompiler) func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xlinker) func_append linker_flags " $qarg" func_append compiler_flags " $wl$qarg" prev= func_append compile_command " $wl$qarg" func_append finalize_command " $wl$qarg" continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi # test -n "$prev" prevarg="$arg" case $arg in -all-static) if test -n "$link_static_flag"; then # See comment for -static flag below, for more details. func_append compile_command " $link_static_flag" func_append finalize_command " $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. func_fatal_error "\`-allow-undefined' must not be used because it is the default" ;; -avoid-version) avoid_version=yes continue ;; -bindir) prev=bindir continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) export_dynamic=yes continue ;; -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then func_fatal_error "more than one -exported-symbols argument is not allowed" fi if test "X$arg" = "X-export-symbols"; then prev=expsyms else prev=expsyms_regex fi continue ;; -framework) prev=framework continue ;; -inst-prefix-dir) prev=inst_prefix continue ;; # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix* | /*-*-irix*) func_append compile_command " $arg" func_append finalize_command " $arg" ;; esac continue ;; -L*) func_stripname "-L" '' "$arg" if test -z "$func_stripname_result"; then if test "$#" -gt 0; then func_fatal_error "require no space between \`-L' and \`$1'" else func_fatal_error "need path for \`-L' option" fi fi func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` test -z "$absdir" && \ func_fatal_error "cannot determine absolute directory name of \`$dir'" dir="$absdir" ;; esac case "$deplibs " in *" -L$dir "* | *" $arg "*) # Will only happen for absolute or sysroot arguments ;; *) # Preserve sysroot, but never include relative directories case $dir in [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; *) func_append deplibs " -L$dir" ;; esac func_append lib_search_path " $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; ::) dllsearchpath=$dir;; *) func_append dllsearchpath ":$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) func_append dllsearchpath ":$testbindir";; esac ;; esac continue ;; -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) # These systems don't actually have a C or math library (as such) continue ;; *-*-os2*) # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework func_append deplibs " System.ltframework" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype test "X$arg" = "X-lc" && continue ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work test "X$arg" = "X-lc" && continue ;; esac elif test "X$arg" = "X-lc_r"; then case $host in *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc_r directly, use -pthread flag. continue ;; esac fi func_append deplibs " $arg" continue ;; -module) module=yes continue ;; # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. # Darwin uses the -arch flag to determine output architecture. -model|-arch|-isysroot|--sysroot) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" prev=xcompiler continue ;; -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" case "$new_inherited_linker_flags " in *" $arg "*) ;; * ) func_append new_inherited_linker_flags " $arg" ;; esac continue ;; -multi_module) single_module="${wl}-multi_module" continue ;; -no-fast-install) fast_install=no continue ;; -no-install) case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. func_warning "\`-no-install' is ignored for $host" func_warning "assuming \`-no-fast-install' instead" fast_install=no ;; *) no_install=yes ;; esac continue ;; -no-undefined) allow_undefined=no continue ;; -objectlist) prev=objectlist continue ;; -o) prev=output ;; -precious-files-regex) prev=precious_regex continue ;; -release) prev=release continue ;; -rpath) prev=rpath continue ;; -R) prev=xrpath continue ;; -R*) func_stripname '-R' '' "$arg" dir=$func_stripname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; =*) func_stripname '=' '' "$dir" dir=$lt_sysroot$func_stripname_result ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in *" $dir "*) ;; *) func_append xrpath " $dir" ;; esac continue ;; -shared) # The effects of -shared are defined in a previous loop. continue ;; -shrext) prev=shrext continue ;; -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects # would be equivalent was wrong. It would break on at least # Digital Unix and AIX. continue ;; -thread-safe) thread_safe=yes continue ;; -version-info) prev=vinfo continue ;; -version-number) prev=vinfo vinfo_number=yes continue ;; -weak) prev=weak continue ;; -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" func_append arg " $func_quote_for_eval_result" func_append compiler_flags " $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Wl,*) func_stripname '-Wl,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" func_append arg " $wl$func_quote_for_eval_result" func_append compiler_flags " $wl$func_quote_for_eval_result" func_append linker_flags " $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Xcompiler) prev=xcompiler continue ;; -Xlinker) prev=xlinker continue ;; -XCClinker) prev=xcclinker continue ;; # -msg_* for osf cc -msg_*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; # Flags to be passed through unchanged, with rationale: # -64, -mips[0-9] enable 64-bit mode for the SGI compiler # -r[0-9][0-9]* specify processor for the SGI compiler # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler # +DA*, +DD* enable 64-bit mode for the HP compiler # -q* compiler args for the IBM compiler # -m*, -t[45]*, -txscale* architecture-specific flags for GCC # -F/path path to uninstalled frameworks, gcc on darwin # -p, -pg, --coverage, -fprofile-* profiling flags for GCC # @file GCC response files # -tp=* Portland pgcc target processor selection # --sysroot=* for sysroot support # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ -O*|-flto*|-fwhopr*|-fuse-linker-plugin) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" func_append compile_command " $arg" func_append finalize_command " $arg" func_append compiler_flags " $arg" continue ;; # Some other compiler flag. -* | +*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; *.$objext) # A standard object. func_append objs " $arg" ;; *.lo) # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then func_append dlfiles " $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi ;; *.$libext) # An archive. func_append deplibs " $arg" func_append old_deplibs " $arg" continue ;; *.la) # A libtool-controlled library. func_resolve_sysroot "$arg" if test "$prev" = dlfiles; then # This library was specified with -dlopen. func_append dlfiles " $func_resolve_sysroot_result" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. func_append dlprefiles " $func_resolve_sysroot_result" prev= else func_append deplibs " $func_resolve_sysroot_result" fi continue ;; # Some other compiler argument. *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then func_append compile_command " $arg" func_append finalize_command " $arg" fi done # argument parsing loop test -n "$prev" && \ func_fatal_help "the \`$prevarg' option requires an argument" if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" func_append compile_command " $arg" func_append finalize_command " $arg" fi oldlibs= # calculate the name of the file, without its directory func_basename "$output" outputname="$func_basename_result" libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" func_dirname "$output" "/" "" output_objdir="$func_dirname_result$objdir" func_to_tool_file "$output_objdir/" tool_output_objdir=$func_to_tool_file_result # Create the object directory. func_mkdir_p "$output_objdir" # Determine the type of output case $output in "") func_fatal_help "you must specify an output file" ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; *.la) linkmode=lib ;; *) linkmode=prog ;; # Anything else should be a program. esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do if $opt_preserve_dup_deps ; then case "$libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append libs " $deplib" done if test "$linkmode" = lib; then libs="$predeps $libs $compiler_lib_search_path $postdeps" # Compute libraries that are listed more than once in $predeps # $postdeps and mark them as special (i.e., whose duplicates are # not to be eliminated). pre_post_deps= if $opt_duplicate_compiler_generated_deps; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; esac func_append pre_post_deps " $pre_post_dep" done fi pre_post_deps= fi deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries notinst_path= # paths that contain not-installed libtool libraries case $linkmode in lib) passes="conv dlpreopen link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" ;; esac done ;; prog) compile_deplibs= finalize_deplibs= alldeplibs=no newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" ;; *) passes="conv" ;; esac for pass in $passes; do # The preopen pass in lib mode reverses $deplibs; put it back here # so that -L comes before libs that need it for instance... if test "$linkmode,$pass" = "lib,link"; then ## FIXME: Find the place where the list is rebuilt in the wrong ## order, and fix it there properly tmp_deplibs= for deplib in $deplibs; do tmp_deplibs="$deplib $tmp_deplibs" done deplibs="$tmp_deplibs" fi if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan"; then libs="$deplibs" deplibs= fi if test "$linkmode" = prog; then case $pass in dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; link) libs="$deplibs %DEPLIBS%" test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ;; esac fi if test "$linkmode,$pass" = "lib,dlpreopen"; then # Collect and forward deplibs of preopened libtool libs for lib in $dlprefiles; do # Ignore non-libtool-libs dependency_libs= func_resolve_sysroot "$lib" case $lib in *.la) func_source "$func_resolve_sysroot_result" ;; esac # Collect preopened libtool deplibs, except any this library # has declared as weak libs for deplib in $dependency_libs; do func_basename "$deplib" deplib_base=$func_basename_result case " $weak_libs " in *" $deplib_base "*) ;; *) func_append deplibs " $deplib" ;; esac done done libs="$dlprefiles" fi if test "$pass" = dlopen; then # Collect dlpreopened libraries save_deplibs="$deplibs" deplibs= fi for deplib in $libs; do lib= found=no case $deplib in -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append compiler_flags " $deplib" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi continue ;; -l*) if test "$linkmode" != lib && test "$linkmode" != prog; then func_warning "\`-l' is ignored for archives/objects" continue fi func_stripname '-l' '' "$deplib" name=$func_stripname_result if test "$linkmode" = lib; then searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" else searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" fi for searchdir in $searchdirs; do for search_ext in .la $std_shrext .so .a; do # Search the libtool library lib="$searchdir/lib${name}${search_ext}" if test -f "$lib"; then if test "$search_ext" = ".la"; then found=yes else found=no fi break 2 fi done done if test "$found" != yes; then # deplib doesn't seem to be a libtool library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue else # deplib is a libtool library # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, # We need to do some special things here, and not later. if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $deplib "*) if func_lalib_p "$lib"; then library_names= old_library= func_source "$lib" for l in $old_library $library_names; do ll="$l" done if test "X$ll" = "X$old_library" ; then # only static version available found=no func_dirname "$lib" "" "." ladir="$func_dirname_result" lib=$ladir/$old_library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue fi fi ;; *) ;; esac fi fi ;; # -l *.ltframework) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi continue ;; -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; prog) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi if test "$pass" = scan; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; *) func_warning "\`-L' is ignored for archives/objects" ;; esac # linkmode continue ;; # -L -R*) if test "$pass" = link; then func_stripname '-R' '' "$deplib" func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; *) func_append xrpath " $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; *.la) func_resolve_sysroot "$deplib" lib=$func_resolve_sysroot_result ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) # Linking convenience modules into shared libraries is allowed, # but linking other static libraries is non-portable. case " $dlpreconveniencelibs " in *" $deplib "*) ;; *) valid_a_lib=no case $deplibs_check_method in match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then valid_a_lib=yes fi ;; pass_all) valid_a_lib=yes ;; esac if test "$valid_a_lib" != yes; then echo $ECHO "*** Warning: Trying to link with static lib archive $deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because the file extensions .$libext of this argument makes me believe" echo "*** that it is just a static archive that I should not use here." else echo $ECHO "*** Warning: Linking the shared library $output against the" $ECHO "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" fi ;; esac continue ;; prog) if test "$pass" != link; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi continue ;; esac # linkmode ;; # *.$libext *.lo | *.$objext) if test "$pass" = conv; then deplibs="$deplib $deplibs" elif test "$linkmode" = prog; then if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. func_append newdlprefiles " $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append newdlfiles " $deplib" fi fi continue ;; %DEPLIBS%) alldeplibs=yes continue ;; esac # case $deplib if test "$found" = yes || test -f "$lib"; then : else func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" fi # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$lib" \ || func_fatal_error "\`$lib' is not a valid libtool archive" func_dirname "$lib" "" "." ladir="$func_dirname_result" dlname= dlopen= dlpreopen= libdir= library_names= old_library= inherited_linker_flags= # If the library was installed with an old release of libtool, # it will not redefine variables installed, or shouldnotlink installed=yes shouldnotlink=no avoidtemprpath= # Read the .la file func_source "$lib" # Convert "-framework foo" to "foo.ltframework" if test -n "$inherited_linker_flags"; then tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do case " $new_inherited_linker_flags " in *" $tmp_inherited_linker_flag "*) ;; *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; esac done fi dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then test -n "$dlopen" && func_append dlfiles " $dlopen" test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" fi if test "$pass" = conv; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # It is a libtool convenience library, so add in its objects. func_append convenience " $ladir/$objdir/$old_library" func_append old_convenience " $ladir/$objdir/$old_library" tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done elif test "$linkmode" != prog && test "$linkmode" != lib; then func_fatal_error "\`$lib' is not a convenience library" fi continue fi # $pass = conv # Get the name of the library we link against. linklib= if test -n "$old_library" && { test "$prefer_static_libs" = yes || test "$prefer_static_libs,$installed" = "built,no"; }; then linklib=$old_library else for l in $old_library $library_names; do linklib="$l" done fi if test -z "$linklib"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then func_fatal_error "cannot -dlopen a convenience library: \`$lib'" fi if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. func_append dlprefiles " $lib $dependency_libs" else func_append newdlfiles " $lib" fi continue fi # $pass = dlopen # We need an absolute path. case $ladir in [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then func_warning "cannot determine absolute directory name of \`$ladir'" func_warning "passing it literally to the linker, although it might fail" abs_ladir="$ladir" fi ;; esac func_basename "$lib" laname="$func_basename_result" # Find the relevant object directory and library name. if test "X$installed" = Xyes; then if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then func_warning "library \`$lib' was moved." dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else dir="$lt_sysroot$libdir" absdir="$lt_sysroot$libdir" fi test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then dir="$ladir" absdir="$abs_ladir" # Remove this search path later func_append notinst_path " $abs_ladir" else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later func_append notinst_path " $abs_ladir" fi fi # $installed = yes func_stripname 'lib' '.la' "$laname" name=$func_stripname_result # This library was specified with -dlpreopen. if test "$pass" = dlpreopen; then if test -z "$libdir" && test "$linkmode" = prog; then func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" fi case "$host" in # special handling for platforms with PE-DLLs. *cygwin* | *mingw* | *cegcc* ) # Linker will automatically link against shared library if both # static and shared are present. Therefore, ensure we extract # symbols from the import library if a shared library is present # (otherwise, the dlopen module name will be incorrect). We do # this by putting the import library name into $newdlprefiles. # We recover the dlopen module name by 'saving' the la file # name in a special purpose variable, and (later) extracting the # dlname from the la file. if test -n "$dlname"; then func_tr_sh "$dir/$linklib" eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" func_append newdlprefiles " $dir/$linklib" else func_append newdlprefiles " $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ func_append dlpreconveniencelibs " $dir/$old_library" fi ;; * ) # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then func_append newdlprefiles " $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ func_append dlpreconveniencelibs " $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then func_append newdlprefiles " $dir/$dlname" else func_append newdlprefiles " $dir/$linklib" fi ;; esac fi # $pass = dlpreopen if test -z "$libdir"; then # Link the convenience library if test "$linkmode" = lib; then deplibs="$dir/$old_library $deplibs" elif test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else deplibs="$lib $deplibs" # used for prog,scan pass fi continue fi if test "$linkmode" = prog && test "$pass" != link; then func_append newlib_search_path " $ladir" deplibs="$lib $deplibs" linkalldeplibs=no if test "$link_all_deplibs" != no || test -z "$library_names" || test "$build_libtool_libs" = no; then linkalldeplibs=yes fi tmp_libs= for deplib in $dependency_libs; do case $deplib in -L*) func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; esac # Need to link against all dependency_libs? if test "$linkalldeplibs" = yes; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done # for deplib continue fi # $linkmode = prog... if test "$linkmode,$pass" = "prog,link"; then if test -n "$library_names" && { { test "$prefer_static_libs" = no || test "$prefer_static_libs,$installed" = "built,yes"; } || test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then # Make sure the rpath contains only unique directories. case "$temp_rpath:" in *"$absdir:"*) ;; *) func_append temp_rpath "$absdir:" ;; esac fi # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) func_append compile_rpath " $absdir" ;; esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac ;; esac fi # $linkmode,$pass = prog,link... if test "$alldeplibs" = yes && { test "$deplibs_check_method" = pass_all || { test "$build_libtool_libs" = yes && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi fi link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs if test "$use_static_libs" = built && test "$installed" = yes; then use_static_libs=no fi if test -n "$library_names" && { test "$use_static_libs" = no || test -z "$old_library"; }; then case $host in *cygwin* | *mingw* | *cegcc*) # No point in relinking DLLs because paths are not encoded func_append notinst_deplibs " $lib" need_relink=no ;; *) if test "$installed" = no; then func_append notinst_deplibs " $lib" need_relink=yes fi ;; esac # This is a shared library # Warn about portability, can't link against -module's on some # systems (darwin). Don't bleat about dlopened modules though! dlopenmodule="" for dlpremoduletest in $dlprefiles; do if test "X$dlpremoduletest" = "X$lib"; then dlopenmodule="$dlpremoduletest" break fi done if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then echo if test "$linkmode" = prog; then $ECHO "*** Warning: Linking the executable $output against the loadable module" else $ECHO "*** Warning: Linking the shared library $output against the loadable module" fi $ECHO "*** $linklib is not portable!" fi if test "$linkmode" = lib && test "$hardcode_into_libs" = yes; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) func_append compile_rpath " $absdir" ;; esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac ;; esac fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names shift realname="$1" shift libname=`eval "\\$ECHO \"$libname_spec\""` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" elif test -n "$soname_spec"; then # bleh windows case $host in *cygwin* | mingw* | *cegcc*) func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; esac eval soname=\"$soname_spec\" else soname="$realname" fi # Make a new name for the extract_expsyms_cmds to use soroot="$soname" func_basename "$soroot" soname="$func_basename_result" func_stripname 'lib' '.dll' "$soname" newlib=libimp-$func_stripname_result.a # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else func_verbose "extracting exported symbol list from \`$soname'" func_execute_cmds "$extract_expsyms_cmds" 'exit $?' fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else func_verbose "generating import library for \`$soname'" func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" if test "$linkmode" = prog || test "$opt_mode" != relink; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) if test "$hardcode_direct" = no; then add="$dir/$linklib" case $host in *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; *-*-sysv4*uw2*) add_dir="-L$dir" ;; *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ *-*-unixware7*) add_dir="-L$dir" ;; *-*-darwin* ) # if the lib is a (non-dlopened) module then we can not # link against it, someone is ignoring the earlier warnings if /usr/bin/file -L $add 2> /dev/null | $GREP ": [^:]* bundle" >/dev/null ; then if test "X$dlopenmodule" != "X$lib"; then $ECHO "*** Warning: lib $linklib is a module, not a shared library" if test -z "$old_library" ; then echo echo "*** And there doesn't seem to be a static archive available" echo "*** The link will probably fail, sorry" else add="$dir/$old_library" fi elif test -n "$old_library"; then add="$dir/$old_library" fi fi esac elif test "$hardcode_minus_L" = no; then case $host in *-*-sunos*) add_shlibpath="$dir" ;; esac add_dir="-L$dir" add="-l$name" elif test "$hardcode_shlibpath_var" = no; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; relink) if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$dir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; *) lib_linked=no ;; esac if test "$lib_linked" != yes; then func_fatal_configuration "unsupported hardcode properties" fi if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; *) func_append compile_shlibpath "$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" if test "$hardcode_direct" != yes && test "$hardcode_minus_L" != yes && test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac fi fi fi if test "$linkmode" = prog || test "$opt_mode" = relink; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac add="-l$name" elif test "$hardcode_automatic" = yes; then if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then add="$inst_prefix_dir$libdir/$linklib" else add="$libdir/$linklib" fi else # We cannot seem to hardcode it, guess we'll fake it. add_dir="-L$libdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" fi if test "$linkmode" = prog; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" fi fi elif test "$linkmode" = prog; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test "$hardcode_direct" != unsupported; then test -n "$old_library" && linklib="$old_library" compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi elif test "$build_libtool_libs" = yes; then # Not a shared library if test "$deplibs_check_method" != pass_all; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. echo $ECHO "*** Warning: This system can not link to static lib archive $lib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then echo "*** But as you try to build a module library, libtool will still create " echo "*** a static module, that should work as long as the dlopening application" echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using \`nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi else deplibs="$dir/$old_library $deplibs" link_static=yes fi fi # link shared/static library? if test "$linkmode" = lib; then if test -n "$dependency_libs" && { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || test "$link_static" = yes; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do case $libdir in -R*) func_stripname '-R' '' "$libdir" temp_xrpath=$func_stripname_result case " $xrpath " in *" $temp_xrpath "*) ;; *) func_append xrpath " $temp_xrpath";; esac;; *) func_append temp_deplibs " $libdir";; esac done dependency_libs="$temp_deplibs" fi func_append newlib_search_path " $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" case $deplib in -L*) func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result";; *) func_resolve_sysroot "$deplib" ;; esac if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $func_resolve_sysroot_result "*) func_append specialdeplibs " $func_resolve_sysroot_result" ;; esac fi func_append tmp_libs " $func_resolve_sysroot_result" done if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do path= case $deplib in -L*) path="$deplib" ;; *.la) func_resolve_sysroot "$deplib" deplib=$func_resolve_sysroot_result func_dirname "$deplib" "" "." dir=$func_dirname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then func_warning "cannot determine absolute directory name of \`$dir'" absdir="$dir" fi ;; esac if $GREP "^installed=no" $deplib > /dev/null; then case $host in *-*-darwin*) depdepl= eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names" ; then for tmp in $deplibrary_names ; do depdepl=$tmp done if test -f "$absdir/$objdir/$depdepl" ; then depdepl="$absdir/$objdir/$depdepl" darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` if test -z "$darwin_install_name"; then darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` fi func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" path= fi fi ;; *) path="-L$absdir/$objdir" ;; esac else eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" test "$absdir" != "$libdir" && \ func_warning "\`$deplib' seems to be moved" path="-L$absdir" fi ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$path $deplibs" ;; esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs if test "$pass" = link; then if test "$linkmode" = "prog"; then compile_deplibs="$new_inherited_linker_flags $compile_deplibs" finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" else compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` fi fi dependency_libs="$newdependency_libs" if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi if test "$pass" != dlopen; then if test "$pass" != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; *) func_append lib_search_path " $dir" ;; esac done newlib_search_path= fi if test "$linkmode,$pass" != "prog,link"; then vars="deplibs" else vars="compile_deplibs finalize_deplibs" fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do # FIXME: Pedantically, this is the right thing to do, so # that some nasty dependency loop isn't accidentally # broken: #new_libs="$deplib $new_libs" # Pragmatically, this seems to cause very few problems in # practice: case $deplib in -L*) new_libs="$deplib $new_libs" ;; -R*) ;; *) # And here is the reason: when a library appears more # than once as an explicit dependence of a library, or # is implicitly linked in more than once by the # compiler, it is considered special, and multiple # occurrences thereof are not removed. Compare this # with having the same library being listed as a # dependency of multiple other libraries: in this case, # we know (pedantically, we assume) the library does not # need to be listed more than once, so we keep only the # last copy. This is not always right, but it is rare # enough that we require users that really mean to play # such unportable linking tricks to link the library # using -Wl,-lname, so that libtool does not consider it # for duplicate removal. case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$deplib $new_libs" ;; esac ;; esac ;; esac done tmp_libs= for deplib in $new_libs; do case $deplib in -L*) case " $tmp_libs " in *" $deplib "*) ;; *) func_append tmp_libs " $deplib" ;; esac ;; *) func_append tmp_libs " $deplib" ;; esac done eval $var=\"$tmp_libs\" done # for var fi # Last step: remove runtime libs from dependency_libs # (they stay in deplibs) tmp_libs= for i in $dependency_libs ; do case " $predeps $postdeps $compiler_lib_search_path " in *" $i "*) i="" ;; esac if test -n "$i" ; then func_append tmp_libs " $i" fi done dependency_libs=$tmp_libs done # for pass if test "$linkmode" = prog; then dlfiles="$newdlfiles" fi if test "$linkmode" = prog || test "$linkmode" = lib; then dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for archives" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for archives" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for archives" test -n "$xrpath" && \ func_warning "\`-R' is ignored for archives" test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for archives" test -n "$release" && \ func_warning "\`-release' is ignored for archives" test -n "$export_symbols$export_symbols_regex" && \ func_warning "\`-export-symbols' is ignored for archives" # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" func_append objs "$old_deplibs" ;; lib) # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) func_stripname 'lib' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) test "$module" = no && \ func_fatal_help "libtool library \`$output' must begin with \`lib'" if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required func_stripname '' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else func_stripname '' '.la' "$outputname" libname=$func_stripname_result fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" else echo $ECHO "*** Warning: Linking the shared library $output against the non-libtool" $ECHO "*** objects $objs is not portable!" func_append libobjs " $objs" fi fi test "$dlself" != no && \ func_warning "\`-dlopen self' is ignored for libtool libraries" set dummy $rpath shift test "$#" -gt 1 && \ func_warning "ignoring multiple \`-rpath's for a libtool library" install_libdir="$1" oldlibs= if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. # Some compilers have problems with a `.al' extension so # convenience libraries should have the same extension an # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for convenience libraries" test -n "$release" && \ func_warning "\`-release' is ignored for convenience libraries" else # Parse the version information argument. save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 shift IFS="$save_ifs" test -n "$7" && \ func_fatal_help "too many parameters to \`-version-info'" # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts # to make the code below a bit more comprehensible case $vinfo_number in yes) number_major="$1" number_minor="$2" number_revision="$3" # # There are really only two kinds -- those that # use the current revision as the major version # and those that subtract age and use age as # a minor version. But, then there is irix # which has an extra 1 added just for fun # case $version_type in darwin|linux|osf|windows|none) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_revision" ;; freebsd-aout|freebsd-elf|qnx|sunos) current="$number_major" revision="$number_minor" age="0" ;; irix|nonstopux) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_minor" lt_irix_increment=no ;; *) func_fatal_configuration "$modename: unknown library version type \`$version_type'" ;; esac ;; no) current="$1" revision="$2" age="$3" ;; esac # Check that each of the things are valid numbers. case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "CURRENT \`$current' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "REVISION \`$revision' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "AGE \`$age' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac if test "$age" -gt "$current"; then func_error "AGE \`$age' is greater than the current interface number \`$current'" func_fatal_error "\`$vinfo' is not valid version information" fi # Calculate the version variables. major= versuffix= verstring= case $version_type in none) ;; darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... func_arith $current + 1 minor_current=$func_arith_result xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; freebsd-aout) major=".$current" versuffix=".$current.$revision"; ;; freebsd-elf) major=".$current" versuffix=".$current" ;; irix | nonstopux) if test "X$lt_irix_increment" = "Xno"; then func_arith $current - $age else func_arith $current - $age + 1 fi major=$func_arith_result case $version_type in nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; esac verstring="$verstring_prefix$major.$revision" # Add in all the interfaces that we are compatible with. loop=$revision while test "$loop" -ne 0; do func_arith $revision - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring_prefix$major.$iface:$verstring" done # Before this point, $major must not contain `.'. major=.$major versuffix="$major.$revision" ;; linux) func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" ;; osf) func_arith $current - $age major=.$func_arith_result versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age while test "$loop" -ne 0; do func_arith $current - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring:${iface}.0" done # Make executables depend on our current version. func_append verstring ":${current}.0" ;; qnx) major=".$current" versuffix=".$current" ;; sunos) major=".$current" versuffix=".$current.$revision" ;; windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 filesystems. func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; *) func_fatal_configuration "unknown library version type \`$version_type'" ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely verstring= ;; *) verstring="0.0" ;; esac if test "$need_version" = no; then versuffix= else versuffix=".0.0" fi fi # Remove version info from name if versioning should be avoided if test "$avoid_version" = yes && test "$need_version" = no; then major= versuffix= verstring="" fi # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then func_warning "undefined symbols not allowed in $host shared libraries" build_libtool_libs=no build_old_libs=yes fi else # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi fi func_generate_dlsyms "$libname" "$libname" "yes" func_append libobjs " $symfileobj" test "X$libobjs" = "X " && libobjs= if test "$opt_mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= tempremovelist=`$ECHO "$output_objdir/*"` for p in $tempremovelist; do case $p in *.$objext | *.gcno) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) if test "X$precious_files_regex" != "X"; then if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 then continue fi fi func_append removelist " $p" ;; *) ;; esac done test -n "$removelist" && \ func_show_eval "${RM}r \$removelist" fi # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then func_append oldlibs " $output_objdir/$libname.$libext" # Transform .lo files to .o files. oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do func_replace_sysroot "$libdir" func_append temp_xrpath " -R$func_replace_sysroot_result" case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened old_dlfiles="$dlfiles" dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; *) func_append dlfiles " $lib" ;; esac done # Make sure dlprefiles contains only unique files old_dlprefiles="$dlprefiles" dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; *) func_append dlprefiles " $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework func_append deplibs " System.ltframework" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work ;; *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then func_append deplibs " -lc" fi ;; esac fi # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname release_save=$release versuffix_save=$versuffix major_save=$major # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? release="" versuffix="" major="" newdeplibs= droppeddeps=no case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just # implementing what was already the behavior. newdeplibs=$deplibs ;; test_compile) # This code stresses the "libraries are programs" paradigm to its # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. $opt_dry_run || $RM conftest.c cat > conftest.c </dev/null` $nocaseglob else potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` fi for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null | $GREP " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | $SED -e 10q | $EGREP "$file_magic_regex" > /dev/null; then func_append newdeplibs " $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a file magic. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. ;; match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` for a_deplib in $deplibs; do case $a_deplib in -l*) func_stripname -l '' "$a_deplib" name=$func_stripname_result if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) func_append newdeplibs " $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then libname=`eval "\\$ECHO \"$libname_spec\""` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ $EGREP "$match_pattern_regex" > /dev/null; then func_append newdeplibs " $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a regex pattern. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` done fi case $tmp_deplibs in *[!\ \ ]*) echo if test "X$deplibs_check_method" = "Xnone"; then echo "*** Warning: inter-library dependencies are not supported in this platform." else echo "*** Warning: inter-library dependencies are not known to be supported." fi echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes ;; esac ;; esac versuffix=$versuffix_save major=$major_save release=$release_save libname=$libname_save name=$name_save case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library with the System framework newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then echo echo "*** Warning: libtool could not satisfy all declared inter-library" $ECHO "*** dependencies of module $libname. Therefore, libtool will create" echo "*** a static module, that should work as long as the dlopening" echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using \`nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi else echo "*** The inter-library dependencies that have been dropped here will be" echo "*** automatically added whenever a program is linked with this library" echo "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then echo echo "*** Since this library must not contain undefined symbols," echo "*** because either the platform does not support them or" echo "*** it was explicitly requested with -no-undefined," echo "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi fi fi # Done checking deplibs! deplibs=$newdeplibs fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" case $host in *-*-darwin*) newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $deplibs " in *" -L$path/$objdir "*) func_append new_libs " -L$path/$objdir" ;; esac ;; esac done for deplib in $deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) func_append new_libs " $deplib" ;; esac ;; *) func_append new_libs " $deplib" ;; esac done deplibs="$new_libs" # All the library-specific variables (install_libdir is set above). library_names= old_library= dlname= # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" test "$opt_mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then func_replace_sysroot "$libdir" libdir=$func_replace_sysroot_result if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append dep_rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) func_apped perm_rpath " $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" if test -n "$hardcode_libdir_flag_spec_ld"; then eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" else eval dep_rpath=\"$hardcode_libdir_flag_spec\" fi fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do func_append rpath "$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi shlibpath="$finalize_shlibpath" test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi # Get the real and link names of the library. eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names shift realname="$1" shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname="$realname" fi if test -z "$dlname"; then dlname=$soname fi lib="$output_objdir/$realname" linknames= for link do func_append linknames " $link" done # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` test "X$libobjs" = "X " && libobjs= delfiles= if test -n "$export_symbols" && test -n "$include_expsyms"; then $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" export_symbols="$output_objdir/$libname.uexp" func_append delfiles " $export_symbols" fi orig_export_symbols= case $host_os in cygwin* | mingw* | cegcc*) if test -n "$export_symbols" && test -z "$export_symbols_regex"; then # exporting using user supplied symfile if test "x`$SED 1q $export_symbols`" != xEXPORTS; then # and it's NOT already a .def file. Must figure out # which of the given symbols are data symbols and tag # them as such. So, trigger use of export_symbols_cmds. # export_symbols gets reassigned inside the "prepare # the list of exported symbols" if statement, so the # include_expsyms logic still works. orig_export_symbols="$export_symbols" export_symbols= always_export_symbols=yes fi fi ;; esac # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' for cmd1 in $cmds; do IFS="$save_ifs" # Take the normal branch if the nm_file_list_spec branch # doesn't work or if tool conversion is not needed. case $nm_file_list_spec~$to_tool_file_cmd in *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) try_normal_branch=yes eval cmd=\"$cmd1\" func_len " $cmd" len=$func_len_result ;; *) try_normal_branch=no ;; esac if test "$try_normal_branch" = yes \ && { test "$len" -lt "$max_cmd_len" \ || test "$max_cmd_len" -le -1; } then func_show_eval "$cmd" 'exit $?' skipped_export=false elif test -n "$nm_file_list_spec"; then func_basename "$output" output_la=$func_basename_result save_libobjs=$libobjs save_output=$output output=${output_objdir}/${output_la}.nm func_to_tool_file "$output" libobjs=$nm_file_list_spec$func_to_tool_file_result func_append delfiles " $output" func_verbose "creating $NM input file list: $output" for obj in $save_libobjs; do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" done > "$output" eval cmd=\"$cmd1\" func_show_eval "$cmd" 'exit $?' output=$save_output libobjs=$save_libobjs skipped_export=false else # The command line is too long to execute in one step. func_verbose "using reloadable object file for export list..." skipped_export=: # Break out early, otherwise skipped_export may be # set to false by a later but shorter cmd. break fi done IFS="$save_ifs" if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi tmp_deplibs= for test_deplib in $deplibs; do case " $convenience " in *" $test_deplib "*) ;; *) func_append tmp_deplibs " $test_deplib" ;; esac done deplibs="$tmp_deplibs" if test -n "$convenience"; then if test -n "$whole_archive_flag_spec" && test "$compiler_needs_object" = yes && test -z "$libobjs"; then # extract the archives, so we have objects to list. # TODO: could optimize this to just extract one archive. whole_archive_flag_spec= fi if test -n "$whole_archive_flag_spec"; then save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= else gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $convenience func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" func_append linker_flags " $flag" fi # Make a backup of the uninstalled library when relinking if test "$opt_mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then eval test_cmds=\"$module_expsym_cmds\" cmds=$module_expsym_cmds else eval test_cmds=\"$module_cmds\" cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval test_cmds=\"$archive_expsym_cmds\" cmds=$archive_expsym_cmds else eval test_cmds=\"$archive_cmds\" cmds=$archive_cmds fi fi if test "X$skipped_export" != "X:" && func_len " $test_cmds" && len=$func_len_result && test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else # The command line is too long to link in one step, link piecewise # or, if using GNU ld and skipped_export is not :, use a linker # script. # Save the value of $output and $libobjs because we want to # use them later. If we have whole_archive_flag_spec, we # want to use save_libobjs as it was before # whole_archive_flag_spec was expanded, because we can't # assume the linker understands whole_archive_flag_spec. # This may have to be revisited, in case too many # convenience libraries get linked in and end up exceeding # the spec. if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then save_libobjs=$libobjs fi save_output=$output func_basename "$output" output_la=$func_basename_result # Clear the reloadable object creation command queue and # initialize k to one. test_cmds= concat_cmds= objlist= last_robj= k=1 if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then output=${output_objdir}/${output_la}.lnkscript func_verbose "creating GNU ld script: $output" echo 'INPUT (' > $output for obj in $save_libobjs do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" >> $output done echo ')' >> $output func_append delfiles " $output" func_to_tool_file "$output" output=$func_to_tool_file_result elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then output=${output_objdir}/${output_la}.lnk func_verbose "creating linker input file list: $output" : > $output set x $save_libobjs shift firstobj= if test "$compiler_needs_object" = yes; then firstobj="$1 " shift fi for obj do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" >> $output done func_append delfiles " $output" func_to_tool_file "$output" output=$firstobj\"$file_list_spec$func_to_tool_file_result\" else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." output=$output_objdir/$output_la-${k}.$objext eval test_cmds=\"$reload_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 # Loop over the list of objects to be linked. for obj in $save_libobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result if test "X$objlist" = X || test "$len" -lt "$max_cmd_len"; then func_append objlist " $obj" else # The command $test_cmds is almost too long, add a # command to the queue. if test "$k" -eq 1 ; then # The first file doesn't have a previous command to add. reload_objs=$objlist eval concat_cmds=\"$reload_cmds\" else # All subsequent reloadable object files will link in # the last one created. reload_objs="$objlist $last_robj" eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" fi last_robj=$output_objdir/$output_la-${k}.$objext func_arith $k + 1 k=$func_arith_result output=$output_objdir/$output_la-${k}.$objext objlist=" $obj" func_len " $last_robj" func_arith $len0 + $func_len_result len=$func_arith_result fi done # Handle the remaining objects by creating one last # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ reload_objs="$objlist $last_robj" eval concat_cmds=\"\${concat_cmds}$reload_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" fi func_append delfiles " $output" else output= fi if ${skipped_export-false}; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols libobjs=$output # Append the command to create the export file. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi fi test -n "$save_libobjs" && func_verbose "creating a temporary reloadable object file: $output" # Loop through the commands generated above and execute them. save_ifs="$IFS"; IFS='~' for cmd in $concat_cmds; do IFS="$save_ifs" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$opt_mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" if test -n "$export_symbols_regex" && ${skipped_export-false}; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi if ${skipped_export-false}; then if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi fi libobjs=$output # Restore the value of output. output=$save_output if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= fi # Expand the library linking commands again to reset the # value of $libobjs for piecewise linking. # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then cmds=$module_expsym_cmds else cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then cmds=$archive_expsym_cmds else cmds=$archive_cmds fi fi fi if test -n "$delfiles"; then # Append the command to remove temporary files to $cmds. eval cmds=\"\$cmds~\$RM $delfiles\" fi # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $dlprefiles func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$opt_mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$opt_mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then if test -z "$whole_archive_flag_spec"; then func_show_eval '${RM}r "$gentop"' fi fi exit $EXIT_SUCCESS fi # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' fi done # If -module or -export-dynamic was specified, set the dlname. if test "$module" = yes || test "$export_dynamic" = yes; then # On all known operating systems, these are identical. dlname="$soname" fi fi ;; obj) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for objects" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for objects" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for objects" test -n "$xrpath" && \ func_warning "\`-R' is ignored for objects" test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for objects" test -n "$release" && \ func_warning "\`-release' is ignored for objects" case $output in *.lo) test -n "$objs$old_deplibs" && \ func_fatal_error "cannot build library object \`$output' from non-libtool objects" libobj=$output func_lo2o "$libobj" obj=$func_lo2o_result ;; *) libobj= obj="$output" ;; esac # Delete the old objects. $opt_dry_run || $RM $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create # different ones for PIC/non-PIC, this we'll have to duplicate # the extraction. reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of # -Wl from whole_archive_flag_spec and hope we can get by with # turning comma into space.. wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` else gentop="$output_objdir/${obj}x" func_append generated " $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi # If we're not building shared, we need to use non_pic_objs test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" # Create the old-style object. reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" func_execute_cmds "$reload_cmds" 'exit $?' # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS fi if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. # $show "echo timestamp > $libobj" # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS fi if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" func_execute_cmds "$reload_cmds" 'exit $?' fi if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS ;; prog) case $host in *cygwin*) func_stripname '' '.exe' "$output" output=$func_stripname_result.exe;; esac test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for programs" test -n "$release" && \ func_warning "\`-release' is ignored for programs" test "$preload" = yes \ && test "$dlopen_support" = unknown \ && test "$dlopen_self" = unknown \ && test "$dlopen_self_static" = unknown && \ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac case $host in *-*-darwin*) # Don't allow lazy linking, it breaks C++ global constructors # But is supposedly fixed on 10.4 or later (yay!). if test "$tagname" = CXX ; then case ${MACOSX_DEPLOYMENT_TARGET-10.0} in 10.[0123]) func_append compile_command " ${wl}-bind_at_load" func_append finalize_command " ${wl}-bind_at_load" ;; esac fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $compile_deplibs " in *" -L$path/$objdir "*) func_append new_libs " -L$path/$objdir" ;; esac ;; esac done for deplib in $compile_deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) func_append new_libs " $deplib" ;; esac ;; *) func_append new_libs " $deplib" ;; esac done compile_deplibs="$new_libs" func_append compile_command " $compile_deplibs" func_append finalize_command " $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac done fi # Now hardcode the library paths rpath= hardcode_libdirs= for libdir in $compile_rpath $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) func_append perm_rpath " $libdir" ;; esac fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; ::) dllsearchpath=$libdir;; *) func_append dllsearchpath ":$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) func_append dllsearchpath ":$testbindir";; esac ;; esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi compile_rpath="$rpath" rpath= hardcode_libdirs= for libdir in $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; *) func_append finalize_perm_rpath " $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi finalize_rpath="$rpath" if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` fi func_generate_dlsyms "$outputname" "@PROGRAM@" "no" # template prelinking step if test -n "$prelink_cmds"; then func_execute_cmds "$prelink_cmds" 'exit $?' fi wrappers_required=yes case $host in *cegcc* | *mingw32ce*) # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. wrappers_required=no ;; *cygwin* | *mingw* ) if test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; *) if test "$need_relink" = no || test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; esac if test "$wrappers_required" = no; then # Replace the output file specification. compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. exit_status=0 func_show_eval "$link_command" 'exit_status=$?' if test -n "$postlink_cmds"; then func_to_tool_file "$output" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi # Delete the generated files. if test -f "$output_objdir/${outputname}S.${objext}"; then func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' fi exit $exit_status fi if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi if test -n "$finalize_shlibpath"; then finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" fi compile_var= finalize_var= if test -n "$runpath_var"; then if test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do func_append rpath "$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi if test -n "$finalize_perm_rpath"; then # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do func_append rpath "$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi fi if test "$no_install" = yes; then # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $opt_dry_run || $RM $output # Link the executable and exit func_show_eval "$link_command" 'exit $?' if test -n "$postlink_cmds"; then func_to_tool_file "$output" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi exit $EXIT_SUCCESS fi if test "$hardcode_action" = relink; then # Fast installation is not supported link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" func_warning "this platform does not like uninstalled shared libraries" func_warning "\`$output' will be relinked during installation" else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= fi else link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" fi fi # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname func_show_eval "$link_command" 'exit $?' if test -n "$postlink_cmds"; then func_to_tool_file "$output_objdir/$outputname" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi # Now create the wrapper script. func_verbose "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` fi # Only actually do things if not in dry run mode. $opt_dry_run || { # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in *.exe) func_stripname '' '.exe' "$output" output=$func_stripname_result ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe func_stripname '' '.exe' "$outputname" outputname=$func_stripname_result ;; *) exeext= ;; esac case $host in *cygwin* | *mingw* ) func_dirname_and_basename "$output" "" "." output_name=$func_basename_result output_path=$func_dirname_result cwrappersource="$output_path/$objdir/lt-$output_name.c" cwrapper="$output_path/$output_name.exe" $RM $cwrappersource $cwrapper trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 func_emit_cwrapperexe_src > $cwrappersource # The wrapper executable is built using the $host compiler, # because it contains $host paths and files. If cross- # compiling, it, like the target executable, must be # executed on the $host or under an emulation environment. $opt_dry_run || { $LTCC $LTCFLAGS -o $cwrapper $cwrappersource $STRIP $cwrapper } # Now, create the wrapper script for func_source use: func_ltwrapper_scriptname $cwrapper $RM $func_ltwrapper_scriptname_result trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 $opt_dry_run || { # note: this script will not be executed, so do not chmod. if test "x$build" = "x$host" ; then $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result else func_emit_wrapper no > $func_ltwrapper_scriptname_result fi } ;; * ) $RM $output trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 func_emit_wrapper no > $output chmod +x $output ;; esac } exit $EXIT_SUCCESS ;; esac # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then oldobjs="$libobjs_save $symfileobj" addlibs="$convenience" build_libtool_libs=no else if test "$build_libtool_libs" = module; then oldobjs="$libobjs_save" build_libtool_libs=no else oldobjs="$old_deplibs $non_pic_objects" if test "$preload" = yes && test -f "$symfileobj"; then func_append oldobjs " $symfileobj" fi fi addlibs="$old_convenience" fi if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $addlibs func_append oldobjs " $func_extract_archives_result" fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then cmds=$old_archive_from_new_cmds else # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $dlprefiles func_append oldobjs " $func_extract_archives_result" fi # POSIX demands no paths to be encoded in archives. We have # to avoid creating archives with duplicate basenames if we # might have to extract them afterwards, e.g., when creating a # static archive out of a convenience library, or when linking # the entirety of a libtool archive into another (currently # not supported by libtool). if (for obj in $oldobjs do func_basename "$obj" $ECHO "$func_basename_result" done | sort | sort -uc >/dev/null 2>&1); then : else echo "copying selected object files to avoid basename conflicts..." gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_mkdir_p "$gentop" save_oldobjs=$oldobjs oldobjs= counter=1 for obj in $save_oldobjs do func_basename "$obj" objbase="$func_basename_result" case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) while :; do # Make sure we don't pick an alternate name that also # overlaps. newobj=lt$counter-$objbase func_arith $counter + 1 counter=$func_arith_result case " $oldobjs " in *[\ /]"$newobj "*) ;; *) if test ! -f "$gentop/$newobj"; then break; fi ;; esac done func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" func_append oldobjs " $gentop/$newobj" ;; *) func_append oldobjs " $obj" ;; esac done fi eval cmds=\"$old_archive_cmds\" func_len " $cmds" len=$func_len_result if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds elif test -n "$archiver_list_spec"; then func_verbose "using command file archive linking..." for obj in $oldobjs do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" done > $output_objdir/$libname.libcmd func_to_tool_file "$output_objdir/$libname.libcmd" oldobjs=" $archiver_list_spec$func_to_tool_file_result" cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts func_verbose "using piecewise archive linking..." save_RANLIB=$RANLIB RANLIB=: objlist= concat_cmds= save_oldobjs=$oldobjs oldobjs= # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do last_oldobj=$obj done eval test_cmds=\"$old_archive_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 for obj in $save_oldobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result func_append objlist " $obj" if test "$len" -lt "$max_cmd_len"; then : else # the above command should be used before it gets too long oldobjs=$objlist if test "$obj" = "$last_oldobj" ; then RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" objlist= len=$len0 fi done RANLIB=$save_RANLIB oldobjs=$objlist if test "X$oldobjs" = "X" ; then eval cmds=\"\$concat_cmds\" else eval cmds=\"\$concat_cmds~\$old_archive_cmds\" fi fi fi func_execute_cmds "$cmds" 'exit $?' done test -n "$generated" && \ func_show_eval "${RM}r$generated" # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" func_verbose "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` if test "$hardcode_automatic" = yes ; then relink_command= fi # Only create the output if not a dry run. $opt_dry_run || { for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then break fi output="$output_objdir/$outputname"i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) func_basename "$deplib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" ;; -L*) func_stripname -L '' "$deplib" func_replace_sysroot "$func_stripname_result" func_append newdependency_libs " -L$func_replace_sysroot_result" ;; -R*) func_stripname -R '' "$deplib" func_replace_sysroot "$func_stripname_result" func_append newdependency_libs " -R$func_replace_sysroot_result" ;; *) func_append newdependency_libs " $deplib" ;; esac done dependency_libs="$newdependency_libs" newdlfiles= for lib in $dlfiles; do case $lib in *.la) func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" ;; *) func_append newdlfiles " $lib" ;; esac done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in *.la) # Only pass preopened files to the pseudo-archive (for # eventual linking with the app. that links it) if we # didn't already link the preopened objects directly into # the library: func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" ;; esac done dlprefiles="$newdlprefiles" else newdlfiles= for lib in $dlfiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlfiles " $abs" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlprefiles " $abs" done dlprefiles="$newdlprefiles" fi $RM $output # place dlname in correct position for cygwin # In fact, it would be nice if we could use this code for all target # systems that can't hard-code library paths into their executables # and that have no shared library path variable independent of PATH, # but it turns out we can't easily determine that from inspecting # libtool variables, so we have to hard-code the OSs to which it # applies here; at the moment, that means platforms that use the PE # object format with DLL files. See the long comment at the top of # tests/bindir.at for full details. tdlname=$dlname case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) # If a -bindir argument was supplied, place the dll there. if test "x$bindir" != x ; then func_relative_path "$install_libdir" "$bindir" tdlname=$func_relative_path_result$dlname else # Otherwise fall back on heuristic. tdlname=../bin/$dlname fi ;; esac $ECHO > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='$tdlname' # Names of this library. library_names='$library_names' # The name of the static archive. old_library='$old_library' # Linker flags that can not go in dependency_libs. inherited_linker_flags='$new_inherited_linker_flags' # Libraries that this one depends upon. dependency_libs='$dependency_libs' # Names of additional weak libraries provided by this library weak_library_names='$weak_libs' # Version information for $libname. current=$current age=$age revision=$revision # Is this an already installed library? installed=$installed # Should we warn about portability when linking against -modules? shouldnotlink=$module # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test "$installed" = no && test "$need_relink" = yes; then $ECHO >> $output "\ relink_command=\"$relink_command\"" fi done } # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' ;; esac exit $EXIT_SUCCESS } { test "$opt_mode" = link || test "$opt_mode" = relink; } && func_mode_link ${1+"$@"} # func_mode_uninstall arg... func_mode_uninstall () { $opt_debug RM="$nonopt" files= rmforce= exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" for arg do case $arg in -f) func_append RM " $arg"; rmforce=yes ;; -*) func_append RM " $arg" ;; *) func_append files " $arg" ;; esac done test -z "$RM" && \ func_fatal_help "you must specify an RM program" rmdirs= for file in $files; do func_dirname "$file" "" "." dir="$func_dirname_result" if test "X$dir" = X.; then odir="$objdir" else odir="$dir/$objdir" fi func_basename "$file" name="$func_basename_result" test "$opt_mode" = uninstall && odir="$dir" # Remember odir for removal later, being careful to avoid duplicates if test "$opt_mode" = clean; then case " $rmdirs " in *" $odir "*) ;; *) func_append rmdirs " $odir" ;; esac fi # Don't error if the file doesn't exist and rm -f was used. if { test -L "$file"; } >/dev/null 2>&1 || { test -h "$file"; } >/dev/null 2>&1 || test -f "$file"; then : elif test -d "$file"; then exit_status=1 continue elif test "$rmforce" = yes; then continue fi rmfiles="$file" case $name in *.la) # Possibly a libtool archive, so verify it. if func_lalib_p "$file"; then func_source $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do func_append rmfiles " $odir/$n" done test -n "$old_library" && func_append rmfiles " $odir/$old_library" case "$opt_mode" in clean) case " $library_names " in *" $dlname "*) ;; *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; esac test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" ;; uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. ;; esac fi ;; *.lo) # Possibly a libtool object, so verify it. if func_lalib_p "$file"; then # Read the .lo file func_source $dir/$name # Add PIC object to the list of files to remove. if test -n "$pic_object" && test "$pic_object" != none; then func_append rmfiles " $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" && test "$non_pic_object" != none; then func_append rmfiles " $dir/$non_pic_object" fi fi ;; *) if test "$opt_mode" = clean ; then noexename=$name case $file in *.exe) func_stripname '' '.exe' "$file" file=$func_stripname_result func_stripname '' '.exe' "$name" noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe func_append rmfiles " $file" ;; esac # Do a test to see if this is a libtool program. if func_ltwrapper_p "$file"; then if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" relink_command= func_source $func_ltwrapper_scriptname_result func_append rmfiles " $func_ltwrapper_scriptname_result" else relink_command= func_source $dir/$noexename fi # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles func_append rmfiles " $odir/$name $odir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then func_append rmfiles " $odir/lt-$name" fi if test "X$noexename" != "X$name" ; then func_append rmfiles " $odir/lt-${noexename}.c" fi fi fi ;; esac func_show_eval "$RM $rmfiles" 'exit_status=1' done # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then func_show_eval "rmdir $dir >/dev/null 2>&1" fi done exit $exit_status } { test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && func_mode_uninstall ${1+"$@"} test -z "$opt_mode" && { help="$generic_help" func_fatal_help "you must specify a MODE" } test -z "$exec_cmd" && \ func_fatal_help "invalid operation mode \`$opt_mode'" if test -n "$exec_cmd"; then eval exec "$exec_cmd" exit $EXIT_FAILURE fi exit $exit_status # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting # choices, we go for a static library, that is the most portable, # since we can't tell whether shared libraries were disabled because # the user asked for that or because the platform doesn't support # them. This is particularly important on AIX, because we don't # support having both static and shared libraries enabled at the same # time on that platform, so we default to a shared-only configuration. # If a disable-shared tag is given, we'll fallback to a static-only # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared build_libtool_libs=no build_old_libs=yes # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: # vi:sw=2 smp_utils-0.97/INSTALL0000664000175000017500000000240011625342432013515 0ustar douggdougg To build and install using the tarball, extract the files from the tarball, change directory to the top level within the extracted tree, and then: # ./configure # make # make install The last command will most likely require root privileges and will place the binaries in the /usr/local/bin directory. Since the utilities need root (superuser) permissions some distrubutions prefer to place the binaries in the /usr/sbin directory. To do that and place the man pages in their normal (Linux) location the ./configure line could be expanded to: # ../configure --prefix=/usr --bindir=/usr/sbin If the configure.ac file in the main directory or any of the Makefile.am files are changed then this should be run prior to ./configure : # ./autogen.sh Also if the ./configure script fails (or the following make) then running the ./autogen.sh may help. To clean up after a build use the following command: # make distclean The build depends on libtool since a shared library is produced. A static library is also produced. By default the binaries (i.e. the utilities in this package) will depend on that shared library. The binaries can be linked instead with the static library with this invocation: # ./configure --disable-shared Douglas Gilbert 22nd August 2011 smp_utils-0.97/COPYING0000664000175000017500000000263711142123675013533 0ustar douggdouggCopyright (c) 2006-2009 Douglas Gilbert. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. smp_utils-0.97/Makefile.am0000664000175000017500000000024311617030111014510 0ustar douggdougg SUBDIRS = include \ lib \ src \ doc EXTRA_DIST=autogen.sh COVERAGE CREDITS distclean-local: rm -rf autom4te.cache rm -f build-stamp configure-stamp smp_utils-0.97/build_debian.sh0000775000175000017500000000055710643272027015440 0ustar douggdougg#!/bin/sh echo "chmod +x debian/rules" chmod +x debian/rules # in some environments the '-rfakeroot' can cause a failure (e.g. when # building as root). If so, remove that argument from the following: echo "dpkg-buildpackage -b -rfakeroot" dpkg-buildpackage -b -rfakeroot # If the above succeeds then the ".deb" binary package is placed in the # parent directory. smp_utils-0.97/depcomp0000775000175000017500000004426711617030111014047 0ustar douggdougg#! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2009-04-28.21; # UTC # Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free # Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try \`$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by `PROGRAMS ARGS'. object Object file output by `PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputing dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi cygpath_u="cygpath -u -f -" if test "$depmode" = msvcmsys; then # This is just like msvisualcpp but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u="sed s,\\\\\\\\,/,g" depmode=msvisualcpp fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. ## Unfortunately, FreeBSD c89 acceptance of flags depends upon ## the command line argument order; so add the flags where they ## appear in depend2.am. Note that the slowdown incurred here ## affects only configure: in makefiles, %FASTDEP% shortcuts this. for arg do case $arg in -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; *) set fnord "$@" "$arg" ;; esac shift # fnord shift # $arg done "$@" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the `deleted header file' problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. tr ' ' ' ' < "$tmpdepfile" | ## Some versions of gcc put a space before the `:'. On the theory ## that the space means something, we add a space to the output as ## well. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like `#:fec' to the end of the # dependency line. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' ' ' ' >> "$depfile" echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts `$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else tmpdepfile1=$dir$base.u tmpdepfile2=$dir$base.u tmpdepfile3=$dir$base.u "$@" -M fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; icc) # Intel's C compiler understands `-MD -MF file'. However on # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c # ICC 7.0 will fill foo.d with something like # foo.o: sub/foo.c # foo.o: sub/foo.h # which is wrong. We want: # sub/foo.o: sub/foo.c # sub/foo.o: sub/foo.h # sub/foo.c: # sub/foo.h: # ICC 7.1 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using \ : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp2) # The "hp" stanza above does not work with aCC (C++) and HP's ia64 # compilers, which have integrated preprocessors. The correct option # to use with these is +Maked; it writes dependencies to a file named # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d "$@" -Wc,+Maked else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d "$@" +Maked fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" # Add `dependent.h:' lines. sed -ne '2,${ s/^ *// s/ \\*$// s/$/:/ p }' "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in `foo.d' instead, so we check for that too. # Subdirectories are respected. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then # With Tru64 cc, shared objects can also be used to make a # static library. This mechanism is used in libtool 1.4 series to # handle both shared and static libraries in a single compilation. # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. # # With libtool 1.5 this exception was removed, and libtool now # generates 2 separate objects for the 2 libraries. These two # compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 tmpdepfile2=$dir$base.o.d # libtool 1.5 tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.o.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d tmpdepfile4=$dir$base.d "$@" -MD fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for `:' # in the target name. This is to cope with DOS-style filenames: # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. "$@" $dashmflag | sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tr ' ' ' ' < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift cleared=no eat=no for arg do case $cleared in no) set ""; shift cleared=yes ;; esac if test $eat = yes; then eat=no continue fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -arch) eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" sed '1,2d' "$tmpdepfile" | tr ' ' ' ' | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi IFS=" " for arg do case "$arg" in -o) shift ;; $object) shift ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E 2>/dev/null | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; msvcmsys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: smp_utils-0.97/missing0000775000175000017500000002623311617030111014062 0ustar douggdougg#! /bin/sh # Common stub for a few missing GNU programs while installing. scriptversion=2009-04-28.21; # UTC # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, # 2008, 2009 Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi run=: sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' sed_minuso='s/.* -o \([^ ]*\).*/\1/p' # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi msg="missing on your system" case $1 in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 # Exit code 63 means version mismatch. This often happens # when the user try to use an ancient version of a tool on # a file that requires a minimum version. In this case we # we should proceed has if the program had been absent, or # if --run hadn't been passed. if test $? = 63; then run=: msg="probably too old" fi ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' autom4te touch the output file, or create a stub one automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and \`g' are ignored when checking the name. Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; esac # normalize program name to check for. program=`echo "$1" | sed ' s/^gnu-//; t s/^gnu//; t s/^g//; t'` # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect # the program). This is about non-GNU programs, so use $1 not # $program. case $1 in lex*|yacc*) # Not GNU programs, they don't have --version. ;; tar*) if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then exit 1 fi ;; *) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then # Could not run --version or --help. This is probably someone # running `$TOOL --version' or `$TOOL --help' to check whether # $TOOL exists and not knowing $TOOL uses missing. exit 1 fi ;; esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case $program in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do case $f in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; autom4te*) echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the proper tools for further handling them. You can get \`$1' as part of \`Autoconf' from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo "#! /bin/sh" echo "# Created by GNU Automake missing as a replacement of" echo "# $ $@" echo "exit 0" chmod +x $file exit 1 fi ;; bison*|yacc*) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if test $# -ne 1; then eval LASTARG="\${$#}" case $LASTARG in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.h fi ;; esac fi if test ! -f y.tab.h; then echo >y.tab.h fi if test ! -f y.tab.c; then echo 'main() { return 0; }' >y.tab.c fi ;; lex*|flex*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if test $# -ne 1; then eval LASTARG="\${$#}" case $LASTARG in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if test -f "$SRCFILE"; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if test ! -f lex.yy.c; then echo 'main() { return 0; }' >lex.yy.c fi ;; help2man*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" exit $? fi ;; makeinfo*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -z "$file"; then # ... or it is the one specified with @setfilename ... infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n ' /^@setfilename/{ s/.* \([^ ]*\) *$/\1/ p q }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi # If the file does not exist, the user really needs makeinfo; # let's fail without touching anything. test -f $file || exit 1 touch $file ;; tar*) shift # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error # messages. if (gnutar --version > /dev/null 2>&1); then gnutar "$@" && exit 0 fi if (gtar --version > /dev/null 2>&1); then gtar "$@" && exit 0 fi firstarg="$1" if shift; then case $firstarg in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac case $firstarg in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 ;; esac fi echo 1>&2 "\ WARNING: I can't seem to be able to run \`tar' with the given arguments. You may want to install GNU tar or Free paxutils, or check the command line arguments." exit 1 ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and is $msg. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: smp_utils-0.97/config.sub0000775000175000017500000010460611661054767014475 0ustar douggdougg#! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, # 2011 Free Software Foundation, Inc. timestamp='2011-03-23' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software # can handle that machine. It does not imply ALL GNU software can. # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA # 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Please send patches to . Submit a context # diff and a properly formatted GNU ChangeLog entry. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # You can get the latest version of this script from: # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS $0 [OPTION] ALIAS Canonicalize a configuration name. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" exit 1 ;; *local*) # First pass through any local machine types. echo $1 exit ;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ knetbsd*-gnu* | netbsd*-gnu* | \ kopensolaris*-gnu* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; *) basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] then os=`echo $1 | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple | -axis | -knuth | -cray | -microblaze) os= basic_machine=$1 ;; -bluegene*) os=-cnk ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 ;; -scout) ;; -wrs) os=-vxworks basic_machine=$1 ;; -chorusos*) os=-chorusos basic_machine=$1 ;; -chorusrdb) os=-chorusrdb basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco6) os=-sco5v6 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5v6*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -udk*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ;; -windowsnt*) os=`echo $os | sed -e 's/windowsnt/winnt/'` ;; -psos*) os=-psos ;; -mint | -mint[0-9]*) basic_machine=m68k-atari os=-mint ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ | bfin \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ | fido | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ | lm32 \ | m32c | m32r | m32rle | m68000 | m68k | m88k \ | maxq | mb | microblaze | mcore | mep | metag \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ | mips64octeon | mips64octeonel \ | mips64orion | mips64orionel \ | mips64r5900 | mips64r5900el \ | mips64vr | mips64vrel \ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ | mips64vr5900 | mips64vr5900el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa64 | mipsisa64el \ | mipsisa64r2 | mipsisa64r2el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ | moxie \ | mt \ | msp430 \ | nds32 | nds32le | nds32be \ | nios | nios2 \ | ns16k | ns32k \ | open8 \ | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle \ | pyramid \ | rx \ | score \ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ | spu \ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ | ubicom32 \ | v850 | v850e \ | we32k \ | x86 | xc16x | xstormy16 | xtensa \ | z8k | z80) basic_machine=$basic_machine-unknown ;; c54x) basic_machine=tic54x-unknown ;; c55x) basic_machine=tic55x-unknown ;; c6x) basic_machine=tic6x-unknown ;; m6811 | m68hc11 | m6812 | m68hc12 | picochip) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ;; ms1) basic_machine=mt-unknown ;; strongarm | thumb | xscale) basic_machine=arm-unknown ;; xscaleeb) basic_machine=armeb-unknown ;; xscaleel) basic_machine=armel-unknown ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* | avr32-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* \ | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* | iq2000-* \ | lm32-* \ | m32c-* | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ | mips64octeon-* | mips64octeonel-* \ | mips64orion-* | mips64orionel-* \ | mips64r5900-* | mips64r5900el-* \ | mips64vr-* | mips64vrel-* \ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ | mips64vr5900-* | mips64vr5900el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa64-* | mipsisa64el-* \ | mipsisa64r2-* | mipsisa64r2el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipstx39-* | mipstx39el-* \ | mmix-* \ | mt-* \ | msp430-* \ | nds32-* | nds32le-* | nds32be-* \ | nios-* | nios2-* \ | none-* | np1-* | ns16k-* | ns32k-* \ | open8-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ | pyramid-* \ | romp-* | rs6000-* | rx-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ | tahoe-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tile-* | tilegx-* \ | tron-* \ | ubicom32-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ | x86-* | x86_64-* | xc16x-* | xps100-* \ | xstormy16-* | xtensa*-* \ | ymp-* \ | z8k-* | z80-*) ;; # Recognize the basic CPU types without company name, with glob match. xtensa*) basic_machine=$basic_machine-unknown ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) basic_machine=i386-unknown os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; a29khif) basic_machine=a29k-amd os=-udi ;; abacus) basic_machine=abacus-unknown ;; adobe68k) basic_machine=m68010-adobe os=-scout ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amd64) basic_machine=x86_64-pc ;; amd64-*) basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-unknown ;; amigaos | amigados) basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; apollo68bsd) basic_machine=m68k-apollo os=-bsd ;; aros) basic_machine=i386-pc os=-aros ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; blackfin) basic_machine=bfin-unknown os=-linux ;; blackfin-*) basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; bluegene*) basic_machine=powerpc-ibm os=-cnk ;; c54x-*) basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` ;; c55x-*) basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` ;; c6x-*) basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` ;; c90) basic_machine=c90-cray os=-unicos ;; cegcc) basic_machine=arm-unknown os=-cegcc ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | j90) basic_machine=j90-cray os=-unicos ;; craynv) basic_machine=craynv-cray os=-unicosmp ;; cr16 | cr16-*) basic_machine=cr16-unknown os=-elf ;; crds | unos) basic_machine=m68k-crds ;; crisv32 | crisv32-* | etraxfs*) basic_machine=crisv32-axis ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; crx) basic_machine=crx-unknown os=-elf ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; decsystem10* | dec10*) basic_machine=pdp10-dec os=-tops10 ;; decsystem20* | dec20*) basic_machine=pdp10-dec os=-tops20 ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; dicos) basic_machine=i686-pc os=-dicos ;; djgpp) basic_machine=i586-pc os=-msdosdjgpp ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2* | dpx2*-bull) basic_machine=m68k-bull os=-sysv3 ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson os=-ose ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; go32) basic_machine=i386-pc os=-go32 ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; h8300xray) basic_machine=h8300-hitachi os=-xray ;; h8500hms) basic_machine=h8500-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) basic_machine=hppa1.1-hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppa-next) os=-nextstep3 ;; hppaosf) basic_machine=hppa1.1-hp os=-osf ;; hppro) basic_machine=hppa1.1-hp os=-proelf ;; i370-ibm* | ibm*) basic_machine=i370-ibm ;; # I'm not sure what "Sysv32" means. Should this be sysv3.2? i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; i386-vsta | vsta) basic_machine=i386-unknown os=-vsta ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; m68knommu) basic_machine=m68k-unknown os=-linux ;; m68knommu-*) basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; m88k-omron*) basic_machine=m88k-omron ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; microblaze) basic_machine=microblaze-xilinx ;; mingw32) basic_machine=i386-pc os=-mingw32 ;; mingw32ce) basic_machine=arm-unknown os=-mingw32ce ;; miniframe) basic_machine=m68000-convergent ;; *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) basic_machine=m68k-atari os=-mint ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; monitor) basic_machine=m68k-rom68k os=-coff ;; morphos) basic_machine=powerpc-unknown os=-morphos ;; msdos) basic_machine=i386-pc os=-msdos ;; ms1-*) basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` ;; mvs) basic_machine=i370-ibm os=-mvs ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; netbsd386) basic_machine=i386-unknown os=-netbsd ;; netwinder) basic_machine=armv4l-rebel os=-linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; necv70) basic_machine=v70-nec os=-sysv ;; next | m*-next ) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; mon960) basic_machine=i960-intel os=-mon960 ;; nonstopux) basic_machine=mips-compaq os=-nonstopux ;; np1) basic_machine=np1-gould ;; neo-tandem) basic_machine=neo-tandem ;; nse-tandem) basic_machine=nse-tandem ;; nsr-tandem) basic_machine=nsr-tandem ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf ;; openrisc | openrisc-*) basic_machine=or32-unknown ;; os400) basic_machine=powerpc-ibm os=-os400 ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose ;; os68k) basic_machine=m68k-none os=-os68k ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; parisc) basic_machine=hppa-unknown os=-linux ;; parisc-*) basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pc98) basic_machine=i386-pc ;; pc98-*) basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; pentium4) basic_machine=i786-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium4-*) basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc | ppcbe) basic_machine=powerpc-unknown ;; ppc-* | ppcbe-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little | ppc64-le | powerpc64-little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; pw32) basic_machine=i586-unknown os=-pw32 ;; rdos) basic_machine=i386-pc os=-rdos ;; rom68k) basic_machine=m68k-rom68k os=-coff ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; s390 | s390-*) basic_machine=s390-ibm ;; s390x | s390x-*) basic_machine=s390x-ibm ;; sa29200) basic_machine=a29k-amd os=-udi ;; sb1) basic_machine=mipsisa64sb1-unknown ;; sb1el) basic_machine=mipsisa64sb1el-unknown ;; sde) basic_machine=mipsisa32-sde os=-elf ;; sei) basic_machine=mips-sei os=-seiux ;; sequent) basic_machine=i386-sequent ;; sh) basic_machine=sh-hitachi os=-hms ;; sh5el) basic_machine=sh5le-unknown ;; sh64) basic_machine=sh64-unknown ;; sparclite-wrs | simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; st2000) basic_machine=m68k-tandem ;; stratus) basic_machine=i860-stratus os=-sysv4 ;; strongarm-* | thumb-*) basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; sv1) basic_machine=sv1-cray os=-unicos ;; symmetry) basic_machine=i386-sequent os=-dynix ;; t3e) basic_machine=alphaev5-cray os=-unicos ;; t90) basic_machine=t90-cray os=-unicos ;; # This must be matched before tile*. tilegx*) basic_machine=tilegx-unknown os=-linux-gnu ;; tile*) basic_machine=tile-unknown os=-linux-gnu ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; toad1) basic_machine=pdp10-xkl os=-tops20 ;; tower | tower-32) basic_machine=m68k-ncr ;; tpf) basic_machine=s390x-ibm os=-tpf ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; v810 | necv810) basic_machine=v810-nec os=-none ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; w65*) basic_machine=w65-wdc os=-none ;; w89k-*) basic_machine=hppa1.1-winbond os=-proelf ;; xbox) basic_machine=i686-pc os=-mingw32 ;; xps | xps100) basic_machine=xps100-honeywell ;; xscale-* | xscalee[bl]-*) basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` ;; ymp) basic_machine=ymp-cray os=-unicos ;; z8k-*-coff) basic_machine=z8k-unknown os=-sim ;; z80-*-coff) basic_machine=z80-unknown os=-sim ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) basic_machine=hppa1.1-winbond ;; op50n) basic_machine=hppa1.1-oki ;; op60c) basic_machine=hppa1.1-oki ;; romp) basic_machine=romp-ibm ;; mmix) basic_machine=mmix-knuth ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp10) # there are many clones, so DEC is not a safe bet basic_machine=pdp10-unknown ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) basic_machine=sparc-sun ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; mac | mpw | mac-mpw) basic_machine=m68k-apple ;; pmac | pmac-mpw) basic_machine=powerpc-apple ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. -auroraux) os=-auroraux ;; -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -svr4*) os=-sysv4 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # First accept the basic system types. # The portable systems comes first. # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ | -sym* | -kopensolaris* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* | -aros* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ | -openbsd* | -solidbsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* | -cegcc* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -linux-gnu* | -linux-android* \ | -linux-newlib* | -linux-uclibc* \ | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) case $basic_machine in x86-* | i*86-*) ;; *) os=-nto$os ;; esac ;; -nto-qnx*) ;; -nto*) os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; -linux-dietlibc) os=-linux-dietlibc ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo $os | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition ;; -os400*) os=-os400 ;; -wince*) os=-wince ;; -osfrose*) os=-osfrose ;; -osf*) os=-osf ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -atheos*) os=-atheos ;; -syllable*) os=-syllable ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; -nova*) os=-rtmk-nova ;; -ns2 ) os=-nextstep2 ;; -nsk*) os=-nsk ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -tpf*) os=-tpf ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -ose*) os=-ose ;; -es1800*) os=-ose ;; -xenix) os=-xenix ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -aros*) os=-aros ;; -kaos*) os=-kaos ;; -zvmoe) os=-zvmoe ;; -dicos*) os=-dicos ;; -nacl*) ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in score-*) os=-elf ;; spu-*) os=-elf ;; *-acorn) os=-riscix1.2 ;; arm*-rebel) os=-linux ;; arm*-semi) os=-aout ;; c4x-* | tic4x-*) os=-coff ;; tic54x-*) os=-coff ;; tic55x-*) os=-coff ;; tic6x-*) os=-coff ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 # This also exists in the configure program, but was not the # default. # os=-sunos4 ;; m68*-cisco) os=-aout ;; mep-*) os=-elf ;; mips*-cisco) os=-elf ;; mips*-*) os=-elf ;; or32-*) os=-coff ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; *-be) os=-beos ;; *-haiku) os=-haiku ;; *-ibm) os=-aix ;; *-knuth) os=-mmixware ;; *-wec) os=-proelf ;; *-winbond) os=-proelf ;; *-oki) os=-proelf ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next ) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-next) os=-nextstep3 ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) os=-coff ;; *-*bug) os=-coff ;; *-apple) os=-macos ;; *-atari*) os=-mint ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -cnk*|-aix*) vendor=ibm ;; -beos*) vendor=be ;; -hpux*) vendor=hp ;; -mpeix*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs* | -opened*) vendor=ibm ;; -os400*) vendor=ibm ;; -ptx*) vendor=sequent ;; -tpf*) vendor=ibm ;; -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) vendor=apple ;; -hms*) vendor=hitachi ;; -mpw* | -macos*) vendor=apple ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; -vos*) vendor=stratus ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os exit # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: smp_utils-0.97/smp_utils.spec0000664000175000017500000000567211706323015015371 0ustar douggdougg%define name smp_utils %define version 0.97 %define release 1 Summary: Utilities for SAS Serial Management Protocol (SMP) Name: %{name} Version: %{version} Release: %{release} License: FreeBSD Group: Utilities/System URL: http://sg.danny.cz/sg/smp_utils.html Source0: http://sg.danny.cz/sg/p/%{name}-%{version}.tgz Provides: smp_utils BuildRequires: libtool BuildRoot: %{_tmppath}/%{name}-%{version}-root Packager: Douglas Gilbert %description This is a package of utilities. Each utility sends a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) request to a SMP target. If the request fails then the error is decoded. If the request succeeds then the response is either decoded, printed out in hexadecimal or output in binary. This package supports the linux 2.6 series and has ports to FreeBSD and Solaris. Warning: These utilities access SAS expanders (storage switches) and the incorrect usage of them may render your system and others inoperable. %package libs Summary: Shared library for %{name} Group: System/Libraries %description libs This package contains the shared library for %{name}. %package devel Summary: Static library and header files for the smputils library Group: Development/C Requires: %{name}-libs = %{version}-%{release} %description devel This package contains the static %{name} library and its header files for developing applications. %prep %setup -q %build %configure %install if [ "$RPM_BUILD_ROOT" != "/" ]; then rm -rf $RPM_BUILD_ROOT fi make install \ DESTDIR=$RPM_BUILD_ROOT %clean if [ "$RPM_BUILD_ROOT" != "/" ]; then rm -rf $RPM_BUILD_ROOT fi %files %defattr(-,root,root) %doc AUTHORS ChangeLog COPYING COVERAGE CREDITS INSTALL NEWS README %attr(755,root,root) %{_sbindir}/* %{_mandir}/man8/* %files libs %defattr(-,root,root) %{_libdir}/*.so.* %files devel %defattr(-,root,root) %{_includedir}/scsi/*.h %{_libdir}/*.so %{_libdir}/*.a %{_libdir}/*.la %changelog * Fri Jan 20 2012 - dgilbert at interlog dot com - change to ./configure style build, put execs in /usr/sbin * smp_utils-0.97 * Sun Jun 19 2011 - dgilbert at interlog dot com - add zoning for SAS-2, SPL, SPL-2 * smp_utils-0.96 * Tue Oct 27 2009 - dgilbert at interlog dot com - discover changes in spl-r04 * smp_utils-0.95 * Mon Dec 29 2008 - dgilbert at interlog dot com - adjust sgv4 for lk 2.6.27, sync with sas2r15 * smp_utils-0.94 * Sun Jan 06 2008 - dgilbert at interlog dot com - sync with sas2r13, add 'sgv4' interface * smp_utils-0.93 * Fri Dec 08 2006 - dgilbert at interlog dot com - sync against sas2r07, add smp_conf_general * smp_utils-0.92 * Tue Aug 22 2006 - dgilbert at interlog dot com - add smp_phy_test and smp_discover_list, uniform exit status values * smp_utils-0.91 * Sun Jun 11 2006 - dgilbert at interlog dot com - add smp_read_gpio, smp_conf_route_info and smp_write_gpio * smp_utils-0.90 smp_utils-0.97/autogen.sh0000775000175000017500000013014111617030111014456 0ustar douggdougg#!/bin/sh # a u t o g e n . s h # # Copyright (c) 2005-2007 United States Government as represented by # the U.S. Army Research Laboratory. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # # 2. Redistributions in binary form must reproduce the above # copyright notice, this list of conditions and the following # disclaimer in the documentation and/or other materials provided # with the distribution. # # 3. The name of the author may not be used to endorse or promote # products derived from this software without specific prior written # permission. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED # WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY # DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, # WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # ### # # Script for automatically preparing the sources for compilation by # performing the myrid of necessary steps. The script attempts to # detect proper version support, and outputs warnings about particular # systems that have autotool peculiarities. # # Basically, if everything is set up and installed correctly, the # script will validate that minimum versions of the GNU Build System # tools are installed, account for several common configuration # issues, and then simply run autoreconf for you. # # If autoreconf fails, which can happen for many valid configurations, # this script proceeds to run manual preparation steps effectively # providing a POSIX shell script (mostly complete) reimplementation of # autoreconf. # # The AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER # environment variables and corresponding _OPTIONS variables (e.g. # AUTORECONF_OPTIONS) may be used to override the default automatic # detection behaviors. Similarly the _VERSION variables will override # the minimum required version numbers. # # Examples: # # To obtain help on usage: # ./autogen.sh --help # # To obtain verbose output: # ./autogen.sh --verbose # # To skip autoreconf and prepare manually: # AUTORECONF=false ./autogen.sh # # To verbosely try running with an older (unsupported) autoconf: # AUTOCONF_VERSION=2.50 ./autogen.sh --verbose # # Author: Christopher Sean Morrison # ###################################################################### # set to minimum acceptible version of autoconf if [ "x$AUTOCONF_VERSION" = "x" ] ; then AUTOCONF_VERSION=2.52 fi # set to minimum acceptible version of automake if [ "x$AUTOMAKE_VERSION" = "x" ] ; then AUTOMAKE_VERSION=1.6.0 fi # set to minimum acceptible version of libtool if [ "x$LIBTOOL_VERSION" = "x" ] ; then LIBTOOL_VERSION=1.4.2 fi ################## # ident function # ################## ident ( ) { # extract copyright from header __copyright="`grep Copyright $AUTOGEN_SH | head -${HEAD_N}1 | awk '{print $4}'`" if [ "x$__copyright" = "x" ] ; then __copyright="`date +%Y`" fi # extract version from CVS Id string __id="$Id: autogen.sh,v 14.97 2007/06/18 22:25:02 brlcad Exp $" __version="`echo $__id | sed 's/.*\([0-9][0-9][0-9][0-9]\)[-\/]\([0-9][0-9]\)[-\/]\([0-9][0-9]\).*/\1\2\3/'`" if [ "x$__version" = "x" ] ; then __version="" fi echo "autogen.sh build preparation script by Christopher Sean Morrison" echo "revised 3-clause BSD-style license, copyright (c) $__copyright" echo "script version $__version, ISO/IEC 9945 POSIX shell script" } ################## # USAGE FUNCTION # ################## usage ( ) { echo "Usage: $AUTOGEN_SH [-h|--help] [-v|--verbose] [-q|--quiet] [--version]" echo " --help Help on $NAME_OF_AUTOGEN usage" echo " --verbose Verbose progress output" echo " --quiet Quiet suppressed progress output" echo " --version Only perform GNU Build System version checks" echo echo "Description: This script will validate that minimum versions of the" echo "GNU Build System tools are installed and then run autoreconf for you." echo "Should autoreconf fail, manual preparation steps will be run" echo "potentially accounting for several common preparation issues. The" echo "AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER," echo "PROJECT, & CONFIGURE environment variables and corresponding _OPTIONS" echo "variables (e.g. AUTORECONF_OPTIONS) may be used to override the" echo "default automatic detection behavior." echo ident return 0 } ########################## # VERSION_ERROR FUNCTION # ########################## version_error ( ) { if [ "x$1" = "x" ] ; then echo "INTERNAL ERROR: version_error was not provided a version" exit 1 fi if [ "x$2" = "x" ] ; then echo "INTERNAL ERROR: version_error was not provided an application name" exit 1 fi $ECHO $ECHO "ERROR: To prepare the ${PROJECT} build system from scratch," $ECHO " at least version $1 of $2 must be installed." $ECHO $ECHO "$NAME_OF_AUTOGEN does not need to be run on the same machine that will" $ECHO "run configure or make. Either the GNU Autotools will need to be installed" $ECHO "or upgraded on this system, or $NAME_OF_AUTOGEN must be run on the source" $ECHO "code on another system and then transferred to here. -- Cheers!" $ECHO } ########################## # VERSION_CHECK FUNCTION # ########################## version_check ( ) { if [ "x$1" = "x" ] ; then echo "INTERNAL ERROR: version_check was not provided a minimum version" exit 1 fi _min="$1" if [ "x$2" = "x" ] ; then echo "INTERNAL ERROR: version check was not provided a comparison version" exit 1 fi _cur="$2" # needed to handle versions like 1.10 and 1.4-p6 _min="`echo ${_min}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`" _cur="`echo ${_cur}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`" _min_major="`echo $_min | cut -d. -f1`" _min_minor="`echo $_min | cut -d. -f2`" _min_patch="`echo $_min | cut -d. -f3`" _cur_major="`echo $_cur | cut -d. -f1`" _cur_minor="`echo $_cur | cut -d. -f2`" _cur_patch="`echo $_cur | cut -d. -f3`" if [ "x$_min_major" = "x" ] ; then _min_major=0 fi if [ "x$_min_minor" = "x" ] ; then _min_minor=0 fi if [ "x$_min_patch" = "x" ] ; then _min_patch=0 fi if [ "x$_cur_minor" = "x" ] ; then _cur_major=0 fi if [ "x$_cur_minor" = "x" ] ; then _cur_minor=0 fi if [ "x$_cur_patch" = "x" ] ; then _cur_patch=0 fi $VERBOSE_ECHO "Checking if ${_cur_major}.${_cur_minor}.${_cur_patch} is greater than ${_min_major}.${_min_minor}.${_min_patch}" if [ $_min_major -lt $_cur_major ] ; then return 0 elif [ $_min_major -eq $_cur_major ] ; then if [ $_min_minor -lt $_cur_minor ] ; then return 0 elif [ $_min_minor -eq $_cur_minor ] ; then if [ $_min_patch -lt $_cur_patch ] ; then return 0 elif [ $_min_patch -eq $_cur_patch ] ; then return 0 fi fi fi return 1 } ###################################### # LOCATE_CONFIGURE_TEMPLATE FUNCTION # ###################################### locate_configure_template ( ) { _pwd="`pwd`" if test -f "./configure.ac" ; then echo "./configure.ac" elif test -f "./configure.in" ; then echo "./configure.in" elif test -f "$_pwd/configure.ac" ; then echo "$_pwd/configure.ac" elif test -f "$_pwd/configure.in" ; then echo "$_pwd/configure.in" elif test -f "$PATH_TO_AUTOGEN/configure.ac" ; then echo "$PATH_TO_AUTOGEN/configure.ac" elif test -f "$PATH_TO_AUTOGEN/configure.in" ; then echo "$PATH_TO_AUTOGEN/configure.in" fi } ################## # argument check # ################## ARGS="$*" PATH_TO_AUTOGEN="`dirname $0`" NAME_OF_AUTOGEN="`basename $0`" AUTOGEN_SH="$PATH_TO_AUTOGEN/$NAME_OF_AUTOGEN" LIBTOOL_M4="${PATH_TO_AUTOGEN}/misc/libtool.m4" if [ "x$HELP" = "x" ] ; then HELP=no fi if [ "x$QUIET" = "x" ] ; then QUIET=no fi if [ "x$VERBOSE" = "x" ] ; then VERBOSE=no fi if [ "x$VERSION_ONLY" = "x" ] ; then VERSION_ONLY=no fi if [ "x$AUTORECONF_OPTIONS" = "x" ] ; then AUTORECONF_OPTIONS="-i -f" fi if [ "x$AUTOCONF_OPTIONS" = "x" ] ; then AUTOCONF_OPTIONS="-f" fi if [ "x$AUTOMAKE_OPTIONS" = "x" ] ; then AUTOMAKE_OPTIONS="-a -c -f" fi ALT_AUTOMAKE_OPTIONS="-a -c" if [ "x$LIBTOOLIZE_OPTIONS" = "x" ] ; then LIBTOOLIZE_OPTIONS="--automake -c -f" fi ALT_LIBTOOLIZE_OPTIONS="--automake --copy --force" if [ "x$ACLOCAL_OPTIONS" = "x" ] ; then ACLOCAL_OPTIONS="" fi if [ "x$AUTOHEADER_OPTIONS" = "x" ] ; then AUTOHEADER_OPTIONS="" fi for arg in $ARGS ; do case "x$arg" in x--help) HELP=yes ;; x-[hH]) HELP=yes ;; x--quiet) QUIET=yes ;; x-[qQ]) QUIET=yes ;; x--verbose) VERBOSE=yes ;; x-[vV]) VERBOSE=yes ;; x--version) VERSION_ONLY=yes ;; *) echo "Unknown option: $arg" echo usage exit 1 ;; esac done ##################### # environment check # ##################### # sanity check before recursions potentially begin if [ ! -f "$AUTOGEN_SH" ] ; then echo "INTERNAL ERROR: $AUTOGEN_SH does not exist" if [ ! "x$0" = "x$AUTOGEN_SH" ] ; then echo "INTERNAL ERROR: dirname/basename inconsistency: $0 != $AUTOGEN_SH" fi exit 1 fi # force locale setting to C so things like date output as expected LC_ALL=C # commands that this script expects for __cmd in echo head tail pwd ; do echo "test" | $__cmd > /dev/null 2>&1 if [ $? != 0 ] ; then echo "INTERNAL ERROR: '${__cmd}' command is required" exit 2 fi done echo "test" | grep "test" > /dev/null 2>&1 if test ! x$? = x0 ; then echo "INTERNAL ERROR: grep command is required" exit 1 fi echo "test" | sed "s/test/test/" > /dev/null 2>&1 if test ! x$? = x0 ; then echo "INTERNAL ERROR: sed command is required" exit 1 fi # determine the behavior of echo case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in *c*,-n*) ECHO_N= ECHO_C=' ' ECHO_T=' ' ;; *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; *) ECHO_N= ECHO_C='\c' ECHO_T= ;; esac # determine the behavior of head case "x`echo 'head' | head -n 1 2>&1`" in *xhead*) HEAD_N="n " ;; *) HEAD_N="" ;; esac # determine the behavior of tail case "x`echo 'tail' | tail -n 1 2>&1`" in *xtail*) TAIL_N="n " ;; *) TAIL_N="" ;; esac VERBOSE_ECHO=: ECHO=: if [ "x$QUIET" = "xyes" ] ; then if [ "x$VERBOSE" = "xyes" ] ; then echo "Verbose output quelled by quiet option. Further output disabled." fi else ECHO=echo if [ "x$VERBOSE" = "xyes" ] ; then echo "Verbose output enabled" VERBOSE_ECHO=echo fi fi # allow a recursive run to disable further recursions if [ "x$RUN_RECURSIVE" = "x" ] ; then RUN_RECURSIVE=yes fi ################################################ # check for help arg and bypass version checks # ################################################ if [ "x`echo $ARGS | sed 's/.*[hH][eE][lL][pP].*/help/'`" = "xhelp" ] ; then HELP=yes fi if [ "x$HELP" = "xyes" ] ; then usage $ECHO "---" $ECHO "Help was requested. No preparation or configuration will be performed." exit 0 fi ####################### # set up signal traps # ####################### untrap_abnormal ( ) { for sig in 1 2 13 15; do trap - $sig done } # do this cleanup whenever we exit. trap ' # start from the root if test -d "$START_PATH" ; then cd "$START_PATH" fi # restore/delete backup files if test "x$PFC_INIT" = "x1" ; then recursive_restore fi ' 0 # trap SIGHUP (1), SIGINT (2), SIGPIPE (13), SIGTERM (15) for sig in 1 2 13 15; do trap ' $ECHO "" $ECHO "Aborting $NAME_OF_AUTOGEN: caught signal '$sig'" # start from the root if test -d "$START_PATH" ; then cd "$START_PATH" fi # clean up on abnormal exit $VERBOSE_ECHO "rm -rf autom4te.cache" rm -rf autom4te.cache if test -f "acinclude.m4.$$.backup" ; then $VERBOSE_ECHO "cat acinclude.m4.$$.backup > acinclude.m4" chmod u+w acinclude.m4 cat acinclude.m4.$$.backup > acinclude.m4 $VERBOSE_ECHO "rm -f acinclude.m4.$$.backup" rm -f acinclude.m4.$$.backup fi { (exit 1); exit 1; } ' $sig done ############################# # look for a configure file # ############################# if [ "x$CONFIGURE" = "x" ] ; then CONFIGURE="`locate_configure_template`" if [ ! "x$CONFIGURE" = "x" ] ; then $VERBOSE_ECHO "Found a configure template: $CONFIGURE" fi else $ECHO "Using CONFIGURE environment variable override: $CONFIGURE" fi if [ "x$CONFIGURE" = "x" ] ; then if [ "x$VERSION_ONLY" = "xyes" ] ; then CONFIGURE=/dev/null else $ECHO $ECHO "A configure.ac or configure.in file could not be located implying" $ECHO "that the GNU Build System is at least not used in this directory. In" $ECHO "any case, there is nothing to do here without one of those files." $ECHO $ECHO "ERROR: No configure.in or configure.ac file found in `pwd`" exit 1 fi fi #################### # get project name # #################### if [ "x$PROJECT" = "x" ] ; then PROJECT="`grep AC_INIT $CONFIGURE | grep -v '.*#.*AC_INIT' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_INIT(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" if [ "x$PROJECT" = "xAC_INIT" ] ; then # projects might be using the older/deprecated arg-less AC_INIT .. look for AM_INIT_AUTOMAKE instead PROJECT="`grep AM_INIT_AUTOMAKE $CONFIGURE | grep -v '.*#.*AM_INIT_AUTOMAKE' | tail -${TAIL_N}1 | sed 's/^[ ]*AM_INIT_AUTOMAKE(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" fi if [ "x$PROJECT" = "xAM_INIT_AUTOMAKE" ] ; then PROJECT="project" fi if [ "x$PROJECT" = "x" ] ; then PROJECT="project" fi else $ECHO "Using PROJECT environment variable override: $PROJECT" fi $ECHO "Preparing the $PROJECT build system...please wait" $ECHO ######################## # check for autoreconf # ######################## HAVE_AUTORECONF=no if [ "x$AUTORECONF" = "x" ] ; then for AUTORECONF in autoreconf ; do $VERBOSE_ECHO "Checking autoreconf version: $AUTORECONF --version" $AUTORECONF --version > /dev/null 2>&1 if [ $? = 0 ] ; then HAVE_AUTORECONF=yes break fi done else HAVE_AUTORECONF=yes $ECHO "Using AUTORECONF environment variable override: $AUTORECONF" fi ########################## # autoconf version check # ########################## _acfound=no if [ "x$AUTOCONF" = "x" ] ; then for AUTOCONF in autoconf ; do $VERBOSE_ECHO "Checking autoconf version: $AUTOCONF --version" $AUTOCONF --version > /dev/null 2>&1 if [ $? = 0 ] ; then _acfound=yes break fi done else _acfound=yes $ECHO "Using AUTOCONF environment variable override: $AUTOCONF" fi _report_error=no if [ ! "x$_acfound" = "xyes" ] ; then $ECHO "ERROR: Unable to locate GNU Autoconf." _report_error=yes else _version="`$AUTOCONF --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`" if [ "x$_version" = "x" ] ; then _version="0.0.0" fi $ECHO "Found GNU Autoconf version $_version" version_check "$AUTOCONF_VERSION" "$_version" if [ $? -ne 0 ] ; then _report_error=yes fi fi if [ "x$_report_error" = "xyes" ] ; then version_error "$AUTOCONF_VERSION" "GNU Autoconf" exit 1 fi ########################## # automake version check # ########################## _amfound=no if [ "x$AUTOMAKE" = "x" ] ; then for AUTOMAKE in automake ; do $VERBOSE_ECHO "Checking automake version: $AUTOMAKE --version" $AUTOMAKE --version > /dev/null 2>&1 if [ $? = 0 ] ; then _amfound=yes break fi done else _amfound=yes $ECHO "Using AUTOMAKE environment variable override: $AUTOMAKE" fi _report_error=no if [ ! "x$_amfound" = "xyes" ] ; then $ECHO $ECHO "ERROR: Unable to locate GNU Automake." _report_error=yes else _version="`$AUTOMAKE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`" if [ "x$_version" = "x" ] ; then _version="0.0.0" fi $ECHO "Found GNU Automake version $_version" version_check "$AUTOMAKE_VERSION" "$_version" if [ $? -ne 0 ] ; then _report_error=yes fi fi if [ "x$_report_error" = "xyes" ] ; then version_error "$AUTOMAKE_VERSION" "GNU Automake" exit 1 fi ######################## # check for libtoolize # ######################## HAVE_LIBTOOLIZE=yes HAVE_ALT_LIBTOOLIZE=no _ltfound=no if [ "x$LIBTOOLIZE" = "x" ] ; then LIBTOOLIZE=libtoolize $VERBOSE_ECHO "Checking libtoolize version: $LIBTOOLIZE --version" $LIBTOOLIZE --version > /dev/null 2>&1 if [ ! $? = 0 ] ; then HAVE_LIBTOOLIZE=no $ECHO if [ "x$HAVE_AUTORECONF" = "xno" ] ; then $ECHO "Warning: libtoolize does not appear to be available." else $ECHO "Warning: libtoolize does not appear to be available. This means that" $ECHO "the automatic build preparation via autoreconf will probably not work." $ECHO "Preparing the build by running each step individually, however, should" $ECHO "work and will be done automatically for you if autoreconf fails." fi # look for some alternates for tool in glibtoolize libtoolize15 libtoolize14 libtoolize13 ; do $VERBOSE_ECHO "Checking libtoolize alternate: $tool --version" _glibtoolize="`$tool --version > /dev/null 2>&1`" if [ $? = 0 ] ; then $VERBOSE_ECHO "Found $tool --version" _glti="`which $tool`" if [ "x$_glti" = "x" ] ; then $VERBOSE_ECHO "Cannot find $tool with which" continue; fi if test ! -f "$_glti" ; then $VERBOSE_ECHO "Cannot use $tool, $_glti is not a file" continue; fi _gltidir="`dirname $_glti`" if [ "x$_gltidir" = "x" ] ; then $VERBOSE_ECHO "Cannot find $tool path with dirname of $_glti" continue; fi if test ! -d "$_gltidir" ; then $VERBOSE_ECHO "Cannot use $tool, $_gltidir is not a directory" continue; fi HAVE_ALT_LIBTOOLIZE=yes LIBTOOLIZE="$tool" $ECHO $ECHO "Fortunately, $tool was found which means that your system may simply" $ECHO "have a non-standard or incomplete GNU Autotools install. If you have" $ECHO "sufficient system access, it may be possible to quell this warning by" $ECHO "running:" $ECHO sudo -V > /dev/null 2>&1 if [ $? = 0 ] ; then $ECHO " sudo ln -s $_glti $_gltidir/libtoolize" $ECHO else $ECHO " ln -s $_glti $_gltidir/libtoolize" $ECHO $ECHO "Run that as root or with proper permissions to the $_gltidir directory" $ECHO fi _ltfound=yes break fi done else _ltfound=yes fi else _ltfound=yes $ECHO "Using LIBTOOLIZE environment variable override: $LIBTOOLIZE" fi ############################ # libtoolize version check # ############################ _report_error=no if [ ! "x$_ltfound" = "xyes" ] ; then $ECHO $ECHO "ERROR: Unable to locate GNU Libtool." _report_error=yes else _version="`$LIBTOOLIZE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`" if [ "x$_version" = "x" ] ; then _version="0.0.0" fi $ECHO "Found GNU Libtool version $_version" version_check "$LIBTOOL_VERSION" "$_version" if [ $? -ne 0 ] ; then _report_error=yes fi fi if [ "x$_report_error" = "xyes" ] ; then version_error "$LIBTOOL_VERSION" "GNU Libtool" exit 1 fi ##################### # check for aclocal # ##################### if [ "x$ACLOCAL" = "x" ] ; then for ACLOCAL in aclocal ; do $VERBOSE_ECHO "Checking aclocal version: $ACLOCAL --version" $ACLOCAL --version > /dev/null 2>&1 if [ $? = 0 ] ; then break fi done else $ECHO "Using ACLOCAL environment variable override: $ACLOCAL" fi ######################## # check for autoheader # ######################## if [ "x$AUTOHEADER" = "x" ] ; then for AUTOHEADER in autoheader ; do $VERBOSE_ECHO "Checking autoheader version: $AUTOHEADER --version" $AUTOHEADER --version > /dev/null 2>&1 if [ $? = 0 ] ; then break fi done else $ECHO "Using AUTOHEADER environment variable override: $AUTOHEADER" fi ######################### # check if version only # ######################### $VERBOSE_ECHO "Checking whether to only output version information" if [ "x$VERSION_ONLY" = "xyes" ] ; then $ECHO ident $ECHO "---" $ECHO "Version requested. No preparation or configuration will be performed." exit 0 fi ################################# # PROTECT_FROM_CLOBBER FUNCTION # ################################# protect_from_clobber ( ) { PFC_INIT=1 # protect COPYING & INSTALL from overwrite by automake. the # automake force option will (inappropriately) ignore the existing # contents of a COPYING and/or INSTALL files (depending on the # version) instead of just forcing *missing* files like it does # for AUTHORS, NEWS, and README. this is broken but extremely # prevalent behavior, so we protect against it by keeping a backup # of the file that can later be restored. if test -f COPYING ; then if test -f COPYING.$$.protect_from_automake.backup ; then $VERBOSE_ECHO "Already backed up COPYING in `pwd`" else $VERBOSE_ECHO "Backing up COPYING in `pwd`" $VERBOSE_ECHO "cp -p COPYING COPYING.$$.protect_from_automake.backup" cp -p COPYING COPYING.$$.protect_from_automake.backup fi fi if test -f INSTALL ; then if test -f INSTALL.$$.protect_from_automake.backup ; then $VERBOSE_ECHO "Already backed up INSTALL in `pwd`" else $VERBOSE_ECHO "Backing up INSTALL in `pwd`" $VERBOSE_ECHO "cp -p INSTALL INSTALL.$$.protect_from_automake.backup" cp -p INSTALL INSTALL.$$.protect_from_automake.backup fi fi } ############################## # RECURSIVE_PROTECT FUNCTION # ############################## recursive_protect ( ) { # for projects using recursive configure, run the build # preparation steps for the subdirectories. this function assumes # START_PATH was set to pwd before recursion begins so that # relative paths work. # git 'r done, protect COPYING and INSTALL from being clobbered protect_from_clobber if test -d autom4te.cache ; then $VERBOSE_ECHO "Found an autom4te.cache directory, deleting it" $VERBOSE_ECHO "rm -rf autom4te.cache" rm -rf autom4te.cache fi # find configure template _configure="`locate_configure_template`" if [ "x$_configure" = "x" ] ; then return fi # $VERBOSE_ECHO "Looking for configure template found `pwd`/$_configure" # look for subdirs # $VERBOSE_ECHO "Looking for subdirs in `pwd`" _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" CHECK_DIRS="" for dir in $_det_config_subdirs ; do if test -d "`pwd`/$dir" ; then CHECK_DIRS="$CHECK_DIRS \"`pwd`/$dir\"" fi done # process subdirs if [ ! "x$CHECK_DIRS" = "x" ] ; then $VERBOSE_ECHO "Recursively scanning the following directories:" $VERBOSE_ECHO " $CHECK_DIRS" for dir in $CHECK_DIRS ; do $VERBOSE_ECHO "Protecting files from automake in $dir" cd "$START_PATH" eval "cd $dir" # recursively git 'r done recursive_protect done fi } # end of recursive_protect ############################# # RESTORE_CLOBBERED FUNCION # ############################# restore_clobbered ( ) { # The automake (and autoreconf by extension) -f/--force-missing # option may overwrite COPYING and INSTALL even if they do exist. # Here we restore the files if necessary. spacer=no # COPYING if test -f COPYING.$$.protect_from_automake.backup ; then if test -f COPYING ; then # compare entire content, restore if needed if test "x`cat COPYING`" != "x`cat COPYING.$$.protect_from_automake.backup`" ; then if test "x$spacer" = "xno" ; then $VERBOSE_ECHO spacer=yes fi # restore the backup $VERBOSE_ECHO "Restoring COPYING from backup (automake -f likely clobbered it)" $VERBOSE_ECHO "rm -f COPYING" rm -f COPYING $VERBOSE_ECHO "mv COPYING.$$.protect_from_automake.backup COPYING" mv COPYING.$$.protect_from_automake.backup COPYING fi # check contents elif test -f COPYING.$$.protect_from_automake.backup ; then $VERBOSE_ECHO "mv COPYING.$$.protect_from_automake.backup COPYING" mv COPYING.$$.protect_from_automake.backup COPYING fi # -f COPYING # just in case $VERBOSE_ECHO "rm -f COPYING.$$.protect_from_automake.backup" rm -f COPYING.$$.protect_from_automake.backup fi # -f COPYING.$$.protect_from_automake.backup # INSTALL if test -f INSTALL.$$.protect_from_automake.backup ; then if test -f INSTALL ; then # compare entire content, restore if needed if test "x`cat INSTALL`" != "x`cat INSTALL.$$.protect_from_automake.backup`" ; then if test "x$spacer" = "xno" ; then $VERBOSE_ECHO spacer=yes fi # restore the backup $VERBOSE_ECHO "Restoring INSTALL from backup (automake -f likely clobbered it)" $VERBOSE_ECHO "rm -f INSTALL" rm -f INSTALL $VERBOSE_ECHO "mv INSTALL.$$.protect_from_automake.backup INSTALL" mv INSTALL.$$.protect_from_automake.backup INSTALL fi # check contents elif test -f INSTALL.$$.protect_from_automake.backup ; then $VERBOSE_ECHO "mv INSTALL.$$.protect_from_automake.backup INSTALL" mv INSTALL.$$.protect_from_automake.backup INSTALL fi # -f INSTALL # just in case $VERBOSE_ECHO "rm -f INSTALL.$$.protect_from_automake.backup" rm -f INSTALL.$$.protect_from_automake.backup fi # -f INSTALL.$$.protect_from_automake.backup CONFIGURE="`locate_configure_template`" if [ "x$CONFIGURE" = "x" ] ; then return fi _aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" if test ! -d "$_aux_dir" ; then _aux_dir=. fi for file in config.guess config.sub ltmain.sh ; do if test -f "${_aux_dir}/${file}" ; then $VERBOSE_ECHO "rm -f \"${_aux_dir}/${file}.backup\"" rm -f "${_aux_dir}/${file}.backup" fi done } # end of restore_clobbered ############################## # RECURSIVE_RESTORE FUNCTION # ############################## recursive_restore ( ) { # restore COPYING and INSTALL from backup if they were clobbered # for each directory recursively. # git 'r undone restore_clobbered # find configure template _configure="`locate_configure_template`" if [ "x$_configure" = "x" ] ; then return fi # look for subdirs _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" CHECK_DIRS="" for dir in $_det_config_subdirs ; do if test -d "`pwd`/$dir" ; then CHECK_DIRS="$CHECK_DIRS \"`pwd`/$dir\"" fi done # process subdirs if [ ! "x$CHECK_DIRS" = "x" ] ; then $VERBOSE_ECHO "Recursively scanning the following directories:" $VERBOSE_ECHO " $CHECK_DIRS" for dir in $CHECK_DIRS ; do $VERBOSE_ECHO "Checking files for automake damage in $dir" cd "$START_PATH" eval "cd $dir" # recursively git 'r undone recursive_restore done fi } # end of recursive_restore ####################### # INITIALIZE FUNCTION # ####################### initialize ( ) { # this routine performs a variety of directory-specific # initializations. some are sanity checks, some are preventive, # and some are necessary setup detection. # # this function sets: # CONFIGURE # SEARCH_DIRS # CONFIG_SUBDIRS ################################## # check for a configure template # ################################## CONFIGURE="`locate_configure_template`" if [ "x$CONFIGURE" = "x" ] ; then $ECHO $ECHO "A configure.ac or configure.in file could not be located implying" $ECHO "that the GNU Build System is at least not used in this directory. In" $ECHO "any case, there is nothing to do here without one of those files." $ECHO $ECHO "ERROR: No configure.in or configure.ac file found in `pwd`" exit 1 fi ##################### # detect an aux dir # ##################### _aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" if test ! -d "$_aux_dir" ; then _aux_dir=. else $VERBOSE_ECHO "Detected auxillary directory: $_aux_dir" fi ################################ # detect a recursive configure # ################################ CONFIG_SUBDIRS="" _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $CONFIGURE | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" for dir in $_det_config_subdirs ; do if test -d "`pwd`/$dir" ; then $VERBOSE_ECHO "Detected recursive configure directory: `pwd`/$dir" CONFIG_SUBDIRS="$CONFIG_SUBDIRS `pwd`/$dir" fi done ########################################## # make sure certain required files exist # ########################################## for file in AUTHORS COPYING ChangeLog INSTALL NEWS README ; do if test ! -f $file ; then $VERBOSE_ECHO "Touching ${file} since it does not exist" touch $file fi done ################################################## # make sure certain generated files do not exist # ################################################## for file in config.guess config.sub ltmain.sh ; do if test -f "${_aux_dir}/${file}" ; then $VERBOSE_ECHO "mv -f \"${_aux_dir}/${file}\" \"${_aux_dir}/${file}.backup\"" mv -f "${_aux_dir}/${file}" "${_aux_dir}/${file}.backup" fi done ############################ # search alternate m4 dirs # ############################ SEARCH_DIRS="" for dir in m4 ; do if [ -d $dir ] ; then $VERBOSE_ECHO "Found extra aclocal search directory: $dir" SEARCH_DIRS="$SEARCH_DIRS -I $dir" fi done ###################################### # remove any previous build products # ###################################### if test -d autom4te.cache ; then $VERBOSE_ECHO "Found an autom4te.cache directory, deleting it" $VERBOSE_ECHO "rm -rf autom4te.cache" rm -rf autom4te.cache fi # tcl/tk (and probably others) have a customized aclocal.m4, so can't delete it # if test -f aclocal.m4 ; then # $VERBOSE_ECHO "Found an aclocal.m4 file, deleting it" # $VERBOSE_ECHO "rm -f aclocal.m4" # rm -f aclocal.m4 # fi } # end of initialize() ############## # initialize # ############## # stash path START_PATH="`pwd`" # Before running autoreconf or manual steps, some prep detection work # is necessary or useful. Only needs to occur once per directory, but # does need to traverse the entire subconfigure hierarchy to protect # files from being clobbered even by autoreconf. recursive_protect # start from where we started cd "$START_PATH" # get ready to process initialize ############################################ # prepare build via autoreconf or manually # ############################################ reconfigure_manually=no if [ "x$HAVE_AUTORECONF" = "xyes" ] ; then $ECHO $ECHO $ECHO_N "Automatically preparing build ... $ECHO_C" $VERBOSE_ECHO "$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS" autoreconf_output="`$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS 2>&1`" ret=$? $VERBOSE_ECHO "$autoreconf_output" if [ ! $ret = 0 ] ; then if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then if [ ! "x`echo \"$autoreconf_output\" | grep libtoolize | grep \"No such file or directory\"`" = "x" ] ; then $ECHO $ECHO "Warning: autoreconf failed but due to what is usually a common libtool" $ECHO "misconfiguration issue. This problem is encountered on systems that" $ECHO "have installed libtoolize under a different name without providing a" $ECHO "symbolic link or without setting the LIBTOOLIZE environment variable." $ECHO $ECHO "Restarting the preparation steps with LIBTOOLIZE set to $LIBTOOLIZE" export LIBTOOLIZE RUN_RECURSIVE=no export RUN_RECURSIVE untrap_abnormal $VERBOSE_ECHO sh $AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9" sh "$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9" exit $? fi fi $ECHO "Warning: $AUTORECONF failed" if test -f ltmain.sh ; then $ECHO "libtoolize being run by autoreconf is not creating ltmain.sh in the auxillary directory like it should" fi $ECHO "Attempting to run the preparation steps individually" reconfigure_manually=yes fi else reconfigure_manually=yes fi ############################ # LIBTOOL_FAILURE FUNCTION # ############################ libtool_failure ( ) { # libtool is rather error-prone in comparison to the other # autotools and this routine attempts to compensate for some # common failures. the output after a libtoolize failure is # parsed for an error related to AC_PROG_LIBTOOL and if found, we # attempt to inject a project-provided libtool.m4 file. _autoconf_output="$1" if [ "x$RUN_RECURSIVE" = "xno" ] ; then # we already tried the libtool.m4, don't try again return 1 fi if test -f "$LIBTOOL_M4" ; then found_libtool="`$ECHO $_autoconf_output | grep AC_PROG_LIBTOOL`" if test ! "x$found_libtool" = "x" ; then if test -f acinclude.m4 ; then rm -f acinclude.m4.$$.backup $VERBOSE_ECHO "cat acinclude.m4 > acinclude.m4.$$.backup" cat acinclude.m4 > acinclude.m4.$$.backup fi $VERBOSE_ECHO "cat \"$LIBTOOL_M4\" >> acinclude.m4" chmod u+w acinclude.m4 cat "$LIBTOOL_M4" >> acinclude.m4 # don't keep doing this RUN_RECURSIVE=no export RUN_RECURSIVE untrap_abnormal $ECHO $ECHO "Restarting the preparation steps with libtool macros in acinclude.m4" $VERBOSE_ECHO sh $AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9" sh "$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9" exit $? fi fi } ########################### # MANUAL_AUTOGEN FUNCTION # ########################### manual_autogen ( ) { ################################################## # Manual preparation steps taken are as follows: # # aclocal [-I m4] # # libtoolize --automake -c -f # # aclocal [-I m4] # # autoconf -f # # autoheader # # automake -a -c -f # ################################################## ########### # aclocal # ########### $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS" aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`" ret=$? $VERBOSE_ECHO "$aclocal_output" if [ ! $ret = 0 ] ; then $ECHO "ERROR: $ACLOCAL failed" && exit 2 ; fi ############## # libtoolize # ############## need_libtoolize=no for feature in AC_PROG_LIBTOOL LT_INIT ; do $VERBOSE_ECHO "Searching for $feature in $CONFIGURE" found="`grep \"^$feature.*\" $CONFIGURE`" if [ ! "x$found" = "x" ] ; then need_libtoolize=yes break fi done if [ "x$need_libtoolize" = "xyes" ] ; then if [ "x$HAVE_LIBTOOLIZE" = "xyes" ] ; then $VERBOSE_ECHO "$LIBTOOLIZE $LIBTOOLIZE_OPTIONS" libtoolize_output="`$LIBTOOLIZE $LIBTOOLIZE_OPTIONS 2>&1`" ret=$? $VERBOSE_ECHO "$libtoolize_output" if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi else if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then $VERBOSE_ECHO "$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS" libtoolize_output="`$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS 2>&1`" ret=$? $VERBOSE_ECHO "$libtoolize_output" if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi fi fi ########### # aclocal # ########### # re-run again as instructed by libtoolize $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS" aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`" ret=$? $VERBOSE_ECHO "$aclocal_output" # libtoolize might put ltmain.sh in the wrong place if test -f ltmain.sh ; then if test ! -f "${_aux_dir}/ltmain.sh" ; then $ECHO $ECHO "Warning: $LIBTOOLIZE is creating ltmain.sh in the wrong directory" $ECHO $ECHO "Fortunately, the problem can be worked around by simply copying the" $ECHO "file to the appropriate location (${_aux_dir}/). This has been done for you." $ECHO $VERBOSE_ECHO "cp -p ltmain.sh \"${_aux_dir}/ltmain.sh\"" cp -p ltmain.sh "${_aux_dir}/ltmain.sh" $ECHO $ECHO_N "Continuing build preparation ... $ECHO_C" fi fi # ltmain.sh fi # need_libtoolize ############ # autoconf # ############ $VERBOSE_ECHO $VERBOSE_ECHO "$AUTOCONF $AUTOCONF_OPTIONS" autoconf_output="`$AUTOCONF $AUTOCONF_OPTIONS 2>&1`" ret=$? $VERBOSE_ECHO "$autoconf_output" if [ ! $ret = 0 ] ; then # retry without the -f and check for usage of macros that are too new ac2_59_macros="AC_C_RESTRICT AC_INCLUDES_DEFAULT AC_LANG_ASSERT AC_LANG_WERROR AS_SET_CATFILE" ac2_55_macros="AC_COMPILER_IFELSE AC_FUNC_MBRTOWC AC_HEADER_STDBOOL AC_LANG_CONFTEST AC_LANG_SOURCE AC_LANG_PROGRAM AC_LANG_CALL AC_LANG_FUNC_TRY_LINK AC_MSG_FAILURE AC_PREPROC_IFELSE" ac2_54_macros="AC_C_BACKSLASH_A AC_CONFIG_LIBOBJ_DIR AC_GNU_SOURCE AC_PROG_EGREP AC_PROG_FGREP AC_REPLACE_FNMATCH AC_FUNC_FNMATCH_GNU AC_FUNC_REALLOC AC_TYPE_MBSTATE_T" macros_to_search="" ac_major="`echo ${AUTOCONF_VERSION}. | cut -d. -f1 | sed 's/[^0-9]//g'`" ac_minor="`echo ${AUTOCONF_VERSION}. | cut -d. -f2 | sed 's/[^0-9]//g'`" if [ $ac_major -lt 2 ] ; then macros_to_search="$ac2_59_macros $ac2_55_macros $ac2_54_macros" else if [ $ac_minor -lt 54 ] ; then macros_to_search="$ac2_59_macros $ac2_55_macros $ac2_54_macros" elif [ $ac_minor -lt 55 ] ; then macros_to_search="$ac2_59_macros $ac2_55_macros" elif [ $ac_minor -lt 59 ] ; then macros_to_search="$ac2_59_macros" fi fi configure_ac_macros=__none__ for feature in $macros_to_search ; do $VERBOSE_ECHO "Searching for $feature in $CONFIGURE" found="`grep \"^$feature.*\" $CONFIGURE`" if [ ! "x$found" = "x" ] ; then if [ "x$configure_ac_macros" = "x__none__" ] ; then configure_ac_macros="$feature" else configure_ac_macros="$feature $configure_ac_macros" fi fi done if [ ! "x$configure_ac_macros" = "x__none__" ] ; then $ECHO $ECHO "Warning: Unsupported macros were found in $CONFIGURE" $ECHO $ECHO "The `echo $CONFIGURE | basename` file was scanned in order to determine if any" $ECHO "unsupported macros are used that exceed the minimum version" $ECHO "settings specified within this file. As such, the following macros" $ECHO "should be removed from configure.ac or the version numbers in this" $ECHO "file should be increased:" $ECHO $ECHO "$configure_ac_macros" $ECHO $ECHO $ECHO_N "Ignorantly continuing build preparation ... $ECHO_C" fi ################### # autoconf, retry # ################### $VERBOSE_ECHO $VERBOSE_ECHO "$AUTOCONF" autoconf_output="`$AUTOCONF 2>&1`" ret=$? $VERBOSE_ECHO "$autoconf_output" if [ ! $ret = 0 ] ; then # test if libtool is busted libtool_failure "$autoconf_output" # let the user know what went wrong cat <&2 exit 1;; esac shift;; -o) chowncmd="$chownprog $2" shift;; -s) stripcmd=$stripprog;; -t) dst_arg=$2 shift;; -T) no_target_directory=true;; --version) echo "$0 $scriptversion"; exit $?;; --) shift break;; -*) echo "$0: invalid option: $1" >&2 exit 1;; *) break;; esac shift done if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dst_arg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dst_arg" shift # fnord fi shift # arg dst_arg=$arg done fi if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call `install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then trap '(exit $?); exit' 1 2 13 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. case $mode in # Optimize common cases. *644) cp_umask=133;; *755) cp_umask=22;; *[0-7]) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac fi for src do # Protect names starting with `-'. case $src in -*) src=./$src;; esac if test -n "$dir_arg"; then dst=$src dstdir=$dst test -d "$dstdir" dstdir_status=$? else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dst_arg # Protect names starting with `-'. case $dst in -*) dst=./$dst;; esac # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else # Prefer dirname, but fall back on a substitute if dirname fails. dstdir=` (dirname "$dst") 2>/dev/null || expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$dst" : 'X\(//\)[^/]' \| \ X"$dst" : 'X\(//\)$' \| \ X"$dst" : 'X\(/\)' \| . 2>/dev/null || echo X"$dst" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q' ` test -d "$dstdir" dstdir_status=$? fi fi obsolete_mkdir_used=false if test $dstdir_status != 0; then case $posix_mkdir in '') # Create intermediate dirs using mode 755 as modified by the umask. # This is like FreeBSD 'install' as of 1997-10-28. umask=`umask` case $stripcmd.$umask in # Optimize common cases. *[2367][2367]) mkdir_umask=$umask;; .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; *[0-7]) mkdir_umask=`expr $umask + 22 \ - $umask % 100 % 40 + $umask % 20 \ - $umask % 10 % 4 + $umask % 2 `;; *) mkdir_umask=$umask,go-w;; esac # With -d, create the new directory with the user-specified mode. # Otherwise, rely on $mkdir_umask. if test -n "$dir_arg"; then mkdir_mode=-m$mode else mkdir_mode= fi posix_mkdir=false case $umask in *[123567][0-7][0-7]) # POSIX mkdir -p sets u+wx bits regardless of umask, which # is incompatible with FreeBSD 'install' when (umask & 300) != 0. ;; *) tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 if (umask $mkdir_umask && exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writeable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. ls_ld_tmpdir=`ls -ld "$tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && $mkdirprog -m$different_mode -p -- "$tmpdir" && { ls_ld_tmpdir_1=`ls -ld "$tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi rmdir "$tmpdir/d" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null fi trap '' 0;; esac;; esac if $posix_mkdir && ( umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else # The umask is ridiculous, or mkdir does not conform to POSIX, # or it failed possibly due to a race condition. Create the # directory the slow way, step by step, checking for races as we go. case $dstdir in /*) prefix='/';; -*) prefix='./';; *) prefix='';; esac eval "$initialize_posix_glob" oIFS=$IFS IFS=/ $posix_glob set -f set fnord $dstdir shift $posix_glob set +f IFS=$oIFS prefixes= for d do test -z "$d" && continue prefix=$prefix$d if test -d "$prefix"; then prefixes= else if $posix_mkdir; then (umask=$mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break # Don't fail if two instances are running concurrently. test -d "$prefix" || exit 1 else case $prefix in *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; *) qprefix=$prefix;; esac prefixes="$prefixes '$qprefix'" fi fi prefix=$prefix/ done if test -n "$prefixes"; then # Don't fail if two instances are running concurrently. (umask $mkdir_umask && eval "\$doit_exec \$mkdirprog $prefixes") || test -d "$dstdir" || exit 1 obsolete_mkdir_used=true fi fi fi if test -n "$dir_arg"; then { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && eval "$initialize_posix_glob" && $posix_glob set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && $posix_glob set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then rm -f "$dsttmp" else # Rename the file to the real destination. $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. { # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { test ! -f "$dst" || $doit $rmcmd -f "$dst" 2>/dev/null || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } } || { echo "$0: cannot unlink or rename $dst" >&2 (exit 1); exit 1 } } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 trap '' 0 fi done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: smp_utils-0.97/examples/0000755000175000017500000000000011706323060014300 5ustar douggdouggsmp_utils-0.97/examples/pconf_all10.txt0000664000175000017500000000112411577703334017153 0ustar douggdougg# Example file invoked like this: # smp_conf_zone_phy_info --pconf= # # Put all phys in zone group 10 # Assume expander with 24 phys. If larger onlt the first 24 phys will # be placed in zine group 10. # # N.B. All values are hex. On each line first byte is phy_id, last byte is # zone group. All phys that make up a wide port need to be set to the same # zone group. 0,0,0,a 1,0,0,a 2,0,0,a 3,0,0,a 4,0,0,a 5,0,0,a 6,0,0,a 7,0,0,a 8,0,0,a 9,0,0,a a,0,0,a b,0,0,a c,0,0,a d,0,0,a e,0,0,a f,0,0,a 10,0,0,a 11,0,0,a 12,0,0,a 13,0,0,a 14,0,0,a 15,0,0,a 16,0,0,a 17,0,0,a smp_utils-0.97/examples/dis_zoning_ex.sh0000775000175000017500000000537611566737355017537 0ustar douggdougg#!/bin/sh # This is an example script showing a simple SAS-2 disable # zoning example. It should undo the affect of the associated # 'zoning_ex.sh' script. If run multiple times or without a # prior 'zoning_ex.sh' script, then this script is harmless. if [ $1 ] ; then if [ "-h" = $1 ] || [ "--help" = $1 ] ; then echo "Usage: dis_zoning_ex.sh []" echo " where:" echo " expander device node" echo echo "dis_zoning_ex.sh disables zoning on . If zoning has " echo "not been set up this script is harmless. If not given " echo "defaults to a value within this script which may need editing." exit 0 fi fi # If the SMP_DEV is not given on the command line then the string # below will probably need to change. Look at 'ls /dev/bsg' . if [ $1 ] ; then SMP_DEV="$1" else SMP_DEV="/dev/bsg/expander-6:0" fi # First a SMP ZONE LOCK function is required. Assume the zone manager # password is zero (i.e. all 32 bytes are zero) or disabled (i.e. all # 32 bytes 0xff) with the physical presence switch on. echo "smp_zone_lock $SMP_DEV" smp_zone_lock $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_zone_lock failed with exit status: $res" exit $res fi echo # Then a SMP ENABLE DISABLE ZONING function is sent. # Here we disable zoning. echo "smp_ena_dis_zoning --disable $SMP_DEV" smp_ena_dis_zoning --disable $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_ena_dis_zoning failed with exit status: $res" echo "N.B. about to unlock the zone" smp_zone_unlock $SMP_DEV exit $res fi echo # Almost finished with a SMP ZONE ACTIVATE function being sent. echo "smp_zone_activate $SMP_DEV" smp_zone_activate $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_zone_activate failed with exit status: $res" echo "N.B. about to unlock the zone" smp_zone_unlock $SMP_DEV exit $res fi echo # And the last active step in the SMP ZONE UNLOCK function being sent. # This will send a Broadcast (Change) [to any affected phys] so any # connected servers will "see" the change [by doing a "discover process"]. echo "smp_zone_unlock $SMP_DEV" smp_zone_unlock $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_zone_unlock failed with exit status: $res" exit $res fi echo # To see if anything has happened, call smp_discover_list which uses # the SMP DISCOVER LIST function. echo "smp_discover_list $SMP_DEV" smp_discover_list $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_smp_discover_list failed with exit status: $res" fi echo # Note that if zoning was previous in effect then the zone groups are # still shown in the smp_discover_list utility output. However because # zoning is disabled, the zone groups have no effect. Also the zone # permission table is still in place but inactive. smp_utils-0.97/examples/rep_permf_8i9t.txt0000664000175000017500000000426011566737355017725 0ustar douggdougg# Report zone permission table response: # Expander change count: 86 # zone locked: 0 # report type: 0 [current] # number of zone groups: 1 (256) # number of zone permission descriptors: 31 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2 ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,e 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,2,2,a 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,4,4,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,8,8,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,10,10,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,20,20,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,40,40,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,80,80,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,4,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,8,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,10,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,20,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,40,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,80,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,ff,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2 smp_utils-0.97/examples/t10annex_zoning_ex.sh0000775000175000017500000001345311577703334020401 0ustar douggdougg#!/bin/sh # This is an example script showing a SAS-2 zoning being set up # by calling various smp_utils utilities. # This example is taken from the "Zone permission configuration descriptor # examples" annex in SAS-2 (and later) drafts found at t10.org # The PERM_FILE is fixed to 'permf_t10annex.txt' while the mapping of # expander phy_ids to zone groups in in the PHYINFO_FILE or can be passed on # the command line. if [ $1 ] ; then if [ "-h" = $1 ] || [ "--help" = $1 ] ; then echo "Usage: t10annex_zoning_ex.sh [ []]" echo " where:" echo " expander device node" echo " phy information file name" echo echo "t10annex_zoning_ex.sh sets up zoning on according to data" echo "in the permf_t10annex.txt file in this directory file. If" echo "either or are not given, they default to values" echo "coded within this script which may need editing." exit 0 fi fi # Set SMP_DEV to the first argument given to this script or the fixed # name shown below. This identifies an expander device (using a bsg # device node in the fixed name shown below)). Place SMP_DEV # on the command line of each smp_utils invocation. If the fixed name # below is used it will probably need to be changed (e.g. look at # 'ls /dev/bsg' output for available expander nodes). if [ $1 ] ; then SMP_DEV="$1" else SMP_DEV="/dev/bsg/expander-6:0" fi # Note the zone permission table file is fixed. Also this file # contains '--start=10' so the (two) descriptors are applied # starting at zone group 10. PERM_FILE="permf_t10annex.txt" # the zone phy information file name is either the second argument, or # defaults: if [ $2 ] ; then PHYINFO_FILE="$2" else PHYINFO_FILE="pconf_all10.txt" fi # First a SMP ZONE LOCK function is required. Assume the zone manager # password is zero (i.e. all 32 bytes are zero) or disabled (i.e. all # 32 bytes 0xff) with the physical presence switch on. echo "smp_zone_lock $SMP_DEV" smp_zone_lock $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_zone_lock failed with exit status: $res" exit $res fi echo # Then a SMP CONFIGURE ZONE PERMISSION TABLE function is sent. # Since --save=SAV is not given, only the shadow values are updated # (and won't be copied to the saved value during the activate step). # Even though the expander support 256 zone groups, it is still possible # to provide 128 zone group style descriptors (which is the default for # this utility). Note that smp_rep_zone_perm_tbl will output 256 style # descriptors in this case. echo "smp_conf_zone_perm_tbl --permf=$PERM_FILE --deduce -v $SMP_DEV" smp_conf_zone_perm_tbl --permf=$PERM_FILE --deduce -v $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_conf_zone_perm_tbl failed with exit status: $res" echo "N.B. about to unlock the zone" smp_zone_unlock $SMP_DEV exit $res fi echo # Next a SMP CONFIGURE ZONE PHY INFORMATION function is sent. # Set up zone phy information descriptors and since --save=SAV is not # given, only the shadow values are updated (and won't be copied to the # saved value during the activate step). echo "smp_conf_zone_phy_info --pconf=$PHYINFO_FILE $SMP_DEV" smp_conf_zone_phy_info --pconf=$PHYINFO_FILE $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_conf_zone_phy_info failed with exit status: $res" echo "N.B. about to unlock the zone" smp_zone_unlock $SMP_DEV exit $res fi echo # Then a SMP ENABLE DISABLE ZONING function is sent. # Enable zoning is the default action of this utility. echo "smp_ena_dis_zoning $SMP_DEV" smp_ena_dis_zoning $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_ena_dis_zoning failed with exit status: $res" echo "N.B. about to unlock the zone" smp_zone_unlock $SMP_DEV exit $res fi echo # Almost finished with a SMP ZONE ACTIVATE function being sent. # The above zone phy information, permission table and enable-disable # values are copied from the shadow values to the current values # making them "live". Note the "saved" values haven't been altered so # an expander power cycle (or a disable zoning) will undo any damage # done by this example. echo "smp_zone_activate $SMP_DEV" smp_zone_activate $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_zone_activate failed with exit status: $res" echo "N.B. about to unlock the zone" smp_zone_unlock $SMP_DEV exit $res fi echo # And the last active step in the SMP ZONE UNLOCK function being sent. # This will send a Broadcast (Change) [to any affected phys] so any # connected servers will "see" the change [by doing a "discover process"]. echo "smp_zone_unlock $SMP_DEV" smp_zone_unlock $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_zone_unlock failed with exit status: $res" exit $res fi echo # To see if anything has happened, call smp_discover_list which uses # the SMP DISCOVER LIST function. echo "smp_discover_list $SMP_DEV" smp_discover_list $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_smp_discover_list failed with exit status: $res" fi echo # Do smp_discover_list again this time with the "ignore zone group" # bit set. echo "smp_discover_list --ignore $SMP_DEV" smp_discover_list --ignore $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_smp_discover_list failed with exit status: $res" fi echo echo "The zone permission table could now be viewed with:" echo " smp_rep_zone_perm_tbl --bits=12 $SMP_DEV" # # Note that the t10 annex example shows the ZP array with its origin # (i.e. ZP[0,0]) in the top left corner. However smp_rep_zone_perm_tbl's # output will show the origin in the top right corner (due to SCSI's big # endian internal representation). To override that, the "--bits=12" option # presents the output like the t10 annex example (i.e. bit oriented, little # endian). # # To comply with t10 rules ZP[10,11] should be zero (as should ZP[11,10]). smp_utils-0.97/examples/zoning_ex.sh0000775000175000017500000001235011577703334016656 0ustar douggdougg#!/bin/sh # This is an example script showing a SAS-2 zoning being set up # by calling various smp_utils utilities. # This is a relatively generic script for setting up zoning. The # customization of the zone groups (who can access whom) is in the # PERMISSION_FILE while the mapping of expander phy_ids to zone # groups in in the PHYINFO_FILE. if [ $1 ] ; then if [ "-h" = $1 ] || [ "--help" = $1 ] ; then echo "Usage: zoning_ex.sh [ [ []]]" echo " where:" echo " expander device node" echo " permission table file name" echo " phy information file name" echo echo "zoning_ex.sh sets up zoning on according to data in the " echo " and files. If these are not given, they default" echo "to values coded within this script which may need editing." exit 0 fi fi # Set SMP_DEV to the first argument given to this script or the fixed # name shown below. This identifies an expander device (using a bsg # device node in the fixed name shown below)). Place SMP_DEV # on the command line of each smp_utils invocation. If the fixed name # below is used it will probably need to be changed (e.g. look at # 'ls /dev/bsg' output for available expander nodes). if [ $1 ] ; then SMP_DEV="$1" else SMP_DEV="/dev/bsg/expander-6:0" fi # Assumptions are made in the zone permission table file and the zone phy # information file. The zone permission table file name is either the # second argument, or defaults: if [ $2 ] ; then PERMISSION_FILE="$2" else PERMISSION_FILE="permf_8i9t.txt" fi # the zone phy information file name is either the third argument, or # defaults: if [ $3 ] ; then PHYINFO_FILE="$3" else PHYINFO_FILE="pconf_2i2t.txt" fi # First a SMP ZONE LOCK function is required. Assume the zone manager # password is zero (i.e. all 32 bytes are zero) or disabled (i.e. all # 32 bytes 0xff) with the physical presence switch on. echo "smp_zone_lock $SMP_DEV" smp_zone_lock $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_zone_lock failed with exit status: $res" exit $res fi echo # Then a SMP CONFIGURE ZONE PERMISSION TABLE function is sent. # Since --save=SAV is not given, only the shadow values are updated # (and won't be copied to the saved value during the activate step). # Even though the expander support 256 zone groups, it is still possible # to provide 128 zone group style descriptors (which is the default for # this utility). Note that smp_rep_zone_perm_tbl will output 256 style # descriptors in this case. echo "smp_conf_zone_perm_tbl --permf=$PERMISSION_FILE --deduce $SMP_DEV" smp_conf_zone_perm_tbl --permf=$PERMISSION_FILE --deduce $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_conf_zone_perm_tbl failed with exit status: $res" echo "N.B. about to unlock the zone" smp_zone_unlock $SMP_DEV exit $res fi echo # Next a SMP CONFIGURE ZONE PHY INFORMATION function is sent. # Set up zone phy information descriptors and since --save=SAV is not # given, only the shadow values are updated (and won't be copied to the # saved value during the activate step). echo "smp_conf_zone_phy_info --pconf=$PHYINFO_FILE $SMP_DEV" smp_conf_zone_phy_info --pconf=$PHYINFO_FILE $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_conf_zone_phy_info failed with exit status: $res" echo "N.B. about to unlock the zone" smp_zone_unlock $SMP_DEV exit $res fi echo # Then a SMP ENABLE DISABLE ZONING function is sent. # Enable zoning is the default action of this utility. echo "smp_ena_dis_zoning $SMP_DEV" smp_ena_dis_zoning $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_ena_dis_zoning failed with exit status: $res" echo "N.B. about to unlock the zone" smp_zone_unlock $SMP_DEV exit $res fi echo # Almost finished with a SMP ZONE ACTIVATE function being sent. # The above zone phy information, permission table and enable-disable # values are copied from the shadow values to the current values # making them "live". Note the "saved" values haven't been altered so # an expander power cycle (or a disable zoning) will undo any damage # done by this example. echo "smp_zone_activate $SMP_DEV" smp_zone_activate $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_zone_activate failed with exit status: $res" echo "N.B. about to unlock the zone" smp_zone_unlock $SMP_DEV exit $res fi echo # And the last active step in the SMP ZONE UNLOCK function being sent. # This will send a Broadcast (Change) [to any affected phys] so any # connected servers will "see" the change [by doing a "discover process"]. echo "smp_zone_unlock $SMP_DEV" smp_zone_unlock $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_zone_unlock failed with exit status: $res" exit $res fi echo # To see if anything has happened, call smp_discover_list which uses # the SMP DISCOVER LIST function. echo "smp_discover_list $SMP_DEV" smp_discover_list $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_smp_discover_list failed with exit status: $res" fi echo # Do smp_discover_list again this time with the "ignore zone group" # bit set. echo "smp_discover_list --ignore $SMP_DEV" smp_discover_list --ignore $SMP_DEV res=$? if [ $res -ne 0 ] ; then echo "smp_smp_discover_list failed with exit status: $res" fi smp_utils-0.97/examples/def_permf.txt0000664000175000017500000000406211577703334017010 0ustar douggdougg# Example file invoked like this: # smp_conf_zone_perm_tbl --permf= --deduce # # Assume 128 zone groups (hence 16 byte table entries); note: even # if expander permits 256 zone groups, it still seems to accept the # 16 byte table entries format. # Assume starting source zone group is 0, define 25 descriptors to # their default permission table settings. # N.B. Since SCSI is big endian, the lower bit positions are to the right. # Each element below is a byte, represented in ASCII hexadecimal. # # first zone permission configuration descriptor follows and # corresponds to source zone group 0 permissions (ZP[0,*]): 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 ff,ff,ff,ff,ff,ff,ff,ff ff,ff,ff,ff,ff,ff,ff,ff 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 # source ZG 8 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 # source ZG 16 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 # source ZG 24 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 # Actually each line can be 16 zeros since the setting of ZG 1 to all # ones and all other zone groups to have access to ZG 1 is implicit # (i.e. cannot be overridden). # Note that a zoning expander can be asked for its default permission # table like this: # smp_rep_zone_perm_tbl --multiple --report=3 # The default zone permission and phy control files could be used # with the scripts in this directory to reset a 24 phy expander to its # zoning defaults (and turn off zoning) like this: # ./zoning_ex.sh def_permf.txt def_pconf.txt # ./dis_zoning_ex.sh smp_utils-0.97/examples/permf_t10annex.txt0000664000175000017500000000445611637072531017712 0ustar douggdougg# Example file invoked like this: # smp_conf_zone_perm_tbl --permf= --deduce # # Assume 128 zone groups (hence 16 byte table entries); note: even # if expander permits 256 zone groups, it still seems to accept the # 16 byte table entries format. # Note that the starting source zone group is set to 10 by this file. # This zone permission descriptor file is designed to set up the # SMP CONFIGURE ZONE PERMISSION TABLE request shown in the "Zone # permission configuration descriptor examples" annex is various # SAS-2 (and later) drafts. [It is Annex L in sas2r16.pdf; Annex H in # spl-r07.pdf and spl2r03.pdf .] # # The request in the Annex example turns all the zone group permission # bits on in source zone group 10, then turns all the zone group # permission bits off in source zone group 11 . # N.B. Since SCSI is big endian, the lower bit positions are to the right. # Each element below is a byte, represented in ASCII hexadecimal. # # Note the '--start=10' so the following descriptors start at source # zone group 10. # If an expander only supports 256 zone groups without expansion of the 16 # byte format, just expand the first line to have 32 bytes of ff and the # second line to 32 bytes of 0 . --start=10 ff,ff,ff,ff,ff,ff,ff,ff ff,ff,ff,ff,ff,ff,ff,ff 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,0 # Why do this? To illustrate that the descriptor not only becomes the # source zone group row in the permission table, but its transpose # should also be placed in the corresponding destination zone group # column. Also invariants are preserved (e.g. ZP[1,*] and ZP[*,1] are # always set). And the descriptors are applied in the order that appear # (i.e. ascending source zone group numbers). # Not all SAS-2 expanders do the transpose insertion. Users may need # to check. Such a check could be done with: # smp_rep_zone_perm_tbl --bits=12 # # Note that the t10 annex example shows the ZP array with its origin # (i.e. ZP[0,0]) in the top left corner. However smp_rep_zone_perm_tbl's # output will show the origin in the top right corner (due to SCSI's big # endian internal representation). To override that, the "--bits=12" option # presents the output like the t10 annex example (i.e. bit oriented, little # endian). # # To comply with t10 rules ZP[10,11] should be zero (as should ZP[11,10]). smp_utils-0.97/examples/def_pconf.txt0000664000175000017500000000162111577703334017002 0ustar douggdougg# Example file invoked like this: # smp_conf_zone_phy_info --pconf= # # Assume an expander with 24 phys. Put all its phys in zone group 1 so # they can all access one another if zoning is enabled. This seems # to be the default setting for expanders. # # N.B. All values are hex. On each line first byte is phy_id, last byte is # zone group. All phys that make up a wide port need to be set to the same # zone group. 0,0,0,1 1,0,0,1 2,0,0,1 3,0,0,1 4,0,0,1 5,0,0,1 6,0,0,1 7,0,0,1 8,0,0,1 9,0,0,1 a,0,0,1 b,0,0,1 c,0,0,1 d,0,0,1 e,0,0,1 f,0,0,1 10,0,0,1 11,0,0,1 12,0,0,1 13,0,0,1 14,0,0,1 15,0,0,1 16,0,0,1 17,0,0,1 # The default zone permission and phy control files could be used # with the scripts in this directory to reset a 24 phy expander to its # zoning defaults (and turn off zoning) like this: # ./zoning_ex.sh def_permf.txt def_pconf.txt # ./dis_zoning_ex.sh smp_utils-0.97/examples/pconf_2i2t.txt0000664000175000017500000000140311577703334017022 0ustar douggdougg# Example file invoked like this: # smp_conf_zone_phy_info --pconf= # # Assume phy ids 0, 1, 2 and 3 are attached to initiator (HBA) doing # zoning and phy control # Assume phy ids 20, 21, 22 and 23 are attached to another initiator (HBA) # Assume phy id 5 is attached to a target (SAS or SATA disk) # Assume phy id 7 is attached to a target (SAS or SATA disk) # # N.B. All values are hex. On each line first byte is phy_id, last byte is # zone group. All phys that make up a wide port need to be set to the same # zone group. 0,0,0,8 1,0,0,8 2,0,0,8 3,0,0,8 14,0,0,9 # so phy_id is 20 (14h) 15,0,0,9 16,0,0,9 17,0,0,9 5,0,0,10 7,0,0,11 # To make the disks connected to phy_ids 5 and 7 visible to both initiators, # place them in ZG 24 (18h). smp_utils-0.97/examples/rep_nocom_permf_8i9t.txt0000664000175000017500000000424211566737355021120 0ustar douggdougg# Report zone permission table response: # Expander change count: 86 # zone locked: 0 # report type: 0 [current] # number of zone groups: 1 (256) # number of zone permission descriptors: 31 0000000000000000000000000000000000000000000000000000000000000002 ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff 0000000000000000000000000000000000000000000000000000000000000102 0000000000000000000000000000000000000000000000000000000000000302 0000000000000000000000000000000000000000000000000000000000000002 0000000000000000000000000000000000000000000000000000000000000002 0000000000000000000000000000000000000000000000000000000000000002 0000000000000000000000000000000000000000000000000000000000000002 000000000000000000000000000000000000000000000000000000000101010e 000000000000000000000000000000000000000000000000000000000102020a 0000000000000000000000000000000000000000000000000000000001040402 0000000000000000000000000000000000000000000000000000000001080802 0000000000000000000000000000000000000000000000000000000001101002 0000000000000000000000000000000000000000000000000000000001202002 0000000000000000000000000000000000000000000000000000000001404002 0000000000000000000000000000000000000000000000000000000001808002 0000000000000000000000000000000000000000000000000000000000000102 0000000000000000000000000000000000000000000000000000000000000202 0000000000000000000000000000000000000000000000000000000000000402 0000000000000000000000000000000000000000000000000000000000000802 0000000000000000000000000000000000000000000000000000000000001002 0000000000000000000000000000000000000000000000000000000000002002 0000000000000000000000000000000000000000000000000000000000004002 0000000000000000000000000000000000000000000000000000000000008002 000000000000000000000000000000000000000000000000000000000000ff02 0000000000000000000000000000000000000000000000000000000000000002 0000000000000000000000000000000000000000000000000000000000000002 0000000000000000000000000000000000000000000000000000000000000002 0000000000000000000000000000000000000000000000000000000000000002 0000000000000000000000000000000000000000000000000000000000000002 0000000000000000000000000000000000000000000000000000000000000002 smp_utils-0.97/examples/README0000664000175000017500000001016111577703334015175 0ustar douggdouggThis directory contains scripts and associated files to show how SAS-2 zoning might be set up and disabled using the utilities in the main directory. Scripts: zoning_ex.sh: configure zoning dis_zoning_ex.sh: disable zoning t10annex_zoning_ex.sh configure zoning with permissions as seen in the SAS-2 Annex example (see below) The zoning_ex.sh script will override any zoning configuration in place prior to its invocation. The zoning_ex.sh script does not save any of its new settings to non-volatile storage on the expander. So when the experimentation is complete, then resetting or power cycling the expander will restore the previous settings **. The zoning_ex.sh script is relatively generic with the tailoring to a set of zone permissions and mapping of expander phys to zone groups being done either by two files in this directory: permf_8i9t.txt *** pconf_2i2t.txt or, alternatively the permission file and the phy info file can be given on the script command line (following the expander device node name). Note that if pconf_2i2t.txt is used then phy ids will most likely need to be changed to match which cable is connected to which expander phy. [Suggestion: examine the output of smp_discover closely to determine which expander phys are connected to what.] The zone permission table can be read back from the expander with the REPORT ZONE PERMISSION TABLE function. After zoning was set up on the author's equipment, the smp_rep_zone_perm_tbl utility was called twice, the second time with the --nocomma option, and the output placed in these files: rep_permf_8i9t.txt rep_nocom_permf_8i9t.txt Note that the input permission file (i.e. permf_8i9t.txt) was formatted as if there are only 128 zone groups but the output shows there are actually 256 zone groups. The expander obviously can cope with this. Also the smp_rep_zone_perm_tbl utility was called without --multiple so less than 256 source zone groups are returned. This does not matter since no zone group above 30 is being used, so all the remaining rows have their default settings. The zone phy information settings can also be read back from the expander. There is no special function for that since the information is available in a DISCOVER and DISCOVER LIST response. The smp_discover_list utility has a --zpi=FN option to create a zone phy information file from the current expander settings. This file is suitable for the smp_conf_zone_phy_info utility. The most recent draft of SAS-2 (and later: SPL and SPL-2) at t10.org contains an annex titled: "Zone permission configuration descriptor examples". It shows how two descriptors in a CONFIGURE ZONE PERMISSION TABLE request change the internal zone permission table. One feature that annex is trying to highlight is that a descriptor not only becomes a source zone group row in that table, but that its transpose becomes the corresponding destination zone group column in that table. There is a reason for highlighting that: not all SAS-2 expanders apply that transpose. The t10annex_zoning_ex.sh script starts up zoning based on the zone permission file permf_t10annex.txt. This will send a CONFIGURE ZONE PERMISSION TABLE request as shown in the annex example. There is an associated zone phy control file pconf_all10.txt which puts the first 24 expander phys in zone group 10. If the t10annex_zoning_ex.sh script is successful then the smp_rep_zone_perm_tbl utility can be used to read the expander zone permission table. A comparison can then be made between what was read back and the final state of the zone permission table shown in the annex. To simplify comparing the read back zone permission table and the SAS-2 annex example, the '--bits=12' option may help. ** Just in case the zone permission table or the zone phy information is saved, these default files are provided: def_permf.txt def_pconf.txt *** The permf_8i9t.txt assumes an expander that does not do the descriptor transpose discussed in the t10 annex example above. This should not cause a problem on an expander that does perform the descriptor transpose. Doug Gilbert 20th June 2011 smp_utils-0.97/examples/permf_8i9t.txt0000664000175000017500000000514311577703334017050 0ustar douggdougg# Example file invoked like this: # smp_conf_zone_perm_tbl --permf= --deduce # # Assume 128 zone groups (hence 16 byte table entries); note: even # if expander permits 256 zone groups, it still seems to accept the # 16 byte table entries format. # Assume starting source zone group is 0, define 25 descriptors # ZG0 : can only access ZG1 [cannot modify] # ZG1 : can access all ZGs [cannot modify] # ZG2 : access to ZG2 allows zoning and phy changes # ZG3 : access to ZG3 allows zoned broadcast # ZG4-7: reserved # ZG8 : initiator (HBA) zone groups with zoning and phy control # ZG9-15: other initiator (HBA) zone groups, can't change expander # ZG16-23: isolated target zone groups (SAS or SATA disk) # ZG24: common target zone group (SAS or SATA disk) # Set up permissions so ZG8 initiators can talk to ZG16 + ZG24 targets; # ZG9 initiators can talk to ZG17 + ZG24 targets; etc until # ZG15 initiators can talk to ZG23 + ZG24 targets. # So initiators (ZG8-15) can talk to ZG24 targets. # Also ZG8 can access ZG2-3 (so can send zoning and phy changes) # and ZG9 can access ZG3 (so ZG9 (and ZG8) can send ZONED BROADCAST) # # N.B. Since SCSI is big endian, the lower bit positions are to the right. # Let initiators see themselves (so ZP[8,8]=1 etc). # Targets don't need to talk to themselves (so ZP[16,16]=0 etc). # Each element below is a byte, represented in ASCII hexadecimal. # # # first zone permission configuration descriptor follows and # corresponds to source zone group 0 permissions (ZP[0,*]): 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 ff,ff,ff,ff,ff,ff,ff,ff ff,ff,ff,ff,ff,ff,ff,ff 0,0,0,0,0,0,0,0 0,0,0,0,0,0,1,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,3,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,2 # source ZG 8 permissions (ZP[8,*]); 8 initiator zone groups follow 0,0,0,0,0,0,0,0 0,0,0,0,1,1,1,e 0,0,0,0,0,0,0,0 0,0,0,0,1,2,2,a 0,0,0,0,0,0,0,0 0,0,0,0,1,4,4,2 0,0,0,0,0,0,0,0 0,0,0,0,1,8,8,2 0,0,0,0,0,0,0,0 0,0,0,0,1,10,10,2 0,0,0,0,0,0,0,0 0,0,0,0,1,20,20,2 0,0,0,0,0,0,0,0 0,0,0,0,1,40,40,2 0,0,0,0,0,0,0,0 0,0,0,0,1,80,80,2 # source ZG 16 permissions (ZP[16,*]); 8 isolated target zone groups follow 0,0,0,0,0,0,0,0 0,0,0,0,0,0,1,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,2,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,4,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,8,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,10,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,20,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,40,2 0,0,0,0,0,0,0,0 0,0,0,0,0,0,80,2 # source ZG 24 permissions (ZP[24,*]); 1 common target zone group follows 0,0,0,0,0,0,0,0 0,0,0,0,0,0,ff,2 # allow remaining source zone groups permissions to take default values smp_utils-0.97/doc/0000755000175000017500000000000011706323060013227 5ustar douggdouggsmp_utils-0.97/doc/Makefile.in0000664000175000017500000003253011661054767015320 0ustar douggdougg# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = doc DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' man8dir = $(mandir)/man8 am__installdirs = "$(DESTDIR)$(man8dir)" NROFF = nroff MANS = $(man_MANS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ SMPUTILS_LIBS = @SMPUTILS_LIBS@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ os_deps = @os_deps@ os_libs = @os_libs@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ man_MANS = \ smp_conf_general.8 smp_conf_phy_event.8 smp_conf_route_info.8 \ smp_conf_zone_man_pass.8 smp_conf_zone_perm_tbl.8 \ smp_conf_zone_phy_info.8 smp_discover.8 smp_discover_list.8 \ smp_ena_dis_zoning.8 smp_phy_control.8 smp_phy_test.8 \ smp_read_gpio.8 smp_rep_broadcast.8 smp_rep_exp_route_tbl.8 \ smp_rep_general.8 smp_rep_manufacturer.8 smp_rep_phy_err_log.8 \ smp_rep_phy_event.8 smp_rep_phy_event_list.8 smp_rep_phy_sata.8 \ smp_rep_route_info.8 smp_rep_self_conf_stat.8 \ smp_rep_zone_man_pass.8 smp_rep_zone_perm_tbl.8 smp_utils.8 \ smp_write_gpio.8 smp_zone_activate.8 smp_zoned_broadcast.8 \ smp_zone_lock.8 smp_zone_unlock.8 all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-man8: $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)" @list=''; test -n "$(man8dir)" || exit 0; \ { for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.8[a-z]*$$/p'; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \ done; } uninstall-man8: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man8dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.8[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ test -z "$$files" || { \ echo " ( cd '$(DESTDIR)$(man8dir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(man8dir)" && rm -f $$files; } tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @list='$(MANS)'; if test -n "$$list"; then \ list=`for p in $$list; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ if test -n "$$list" && \ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ echo " typically \`make maintainer-clean' will remove them" >&2; \ exit 1; \ else :; fi; \ else :; fi @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(MANS) installdirs: for dir in "$(DESTDIR)$(man8dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-man install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-man8 install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-man uninstall-man: uninstall-man8 .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ distclean distclean-generic distclean-libtool distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-man8 \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ uninstall uninstall-am uninstall-man uninstall-man8 # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: smp_utils-0.97/doc/smp_phy_test.80000664000175000017500000001246511620776341016061 0ustar douggdougg.TH SMP_PHY_TEST "8" "May 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_phy_test \- invoke PHY TEST FUNTION SMP function .SH SYNOPSIS .B smp_phy_test [\fI\-\-control=CO\fR] [\fI\-\-dwords=DW\fR] [\fI\-\-expected=EX\fR] [\fI\-\-function=FN\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-linkrate=LR\fR] [\fI\-\-pattern=PA\fR] [\fI\-\-phy=ID\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-sata\fR] [\fI\-\-spread=SC\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) PHY TEST FUNCTION function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fISAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .PP The PHY TEST FUNCTION function can be used to start and stop test pattern transmission. When a phy associated with an SMP target (most likely an expander) starts test pattern transmission then the attached phy (if there is one) sees a link down. .PP SAS phys associated with SSP targets (e.g. a SAS disk) can generate similar test patterns by using the SEND DIAGNOSTIC SCSI command with page code 3fh . See the sg_senddiag utility. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-c\fR, \fB\-\-control\fR=\fICO\fR set the 'phy test pattern dwords control' field. The argument \fICO\fR can be from 0 to 255 inclusive, the default is 0 (each byte in 'dwords' sent as data byte (Dxx.y) without scrambling). Only active when 'pattern' is set to 40h (i.e. "two_dwords"). .TP \fB\-d\fR, \fB\-\-dwords\fR=\fIDW\fR set the 'phy test pattern dwords' field which is 8 bytes long. The argument \fIDW\fR would normally be entered in hex with a leading '0x' or a trailing 'h' (otherwise it would be interpreted as decimal). Due to a quirk in the command line parser, the argument value ffffffffffffffffh (i.e. all bits sets) needs to be entered as '\-1'. .TP \fB\-E\fR, \fB\-\-expected\fR=\fIEX\fR set the 'expected expander change count' field in the SMP request. The value \fIEX\fR is from 0 to 65535 inclusive with 0 being the default value. When \fIEX\fR is greater than zero then if the value doesn't match the expander change count of the SMP target (i.e. the expander) when the request arrives then the target ignores the request and sets a function result of "invalid expander change count" in the response. .TP \fB\-f\fR, \fB\-\-function\fR=\fIFN\fR set the 'phy test function' field in the SMP request. Values between 0 and 255 are accepted with the default being 0. The value 0 stops the selected phy performing a phy test function. The value 1 starts the selected phy transmitting the test pattern (and anything that the phy receives is discarded). .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-l\fR, \fB\-\-linkrate\fR=\fILR\fR transmits the test pattern at the specified physical link rate: 8 \-> 1.5 Gbps, 9 \-> 3 Gbps, 10 \-> 6 Gbps, 11 \-> 12 Gbps. Default value is 9. .TP \fB\-P\fR, \fB\-\-pattern\fR=\fIPA\fR specifies the type of test pattern to transmit. SAS\-2 (rev15) values are: 1 \-> JTPAT, 2 \-> CJTPAT, 10h \-> TRAIN, 11h \-> TRAIN_DONE, 12h \-> IDLE, 13h \-> SCRAMBLED_0, 40h \-> "two_dwords". Default value is 2. .TP \fB\-p\fR, \fB\-\-phy\fR=\fIID\fR phy identifier. \fIID\fR is a value between 0 and 254. Default is 0. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if the \fISMP_DEVICE\fR has the target's SAS address within it. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-t\fR, \fB\-\-sata\fR set phy test function SATA bit. The default action is to leave that bit clear (zero). .TP \fB\-S\fR, \fB\-\-spread\fR=\fISC\fR set the phy test function Spread Spectrum Clocking (SSC) field to \fISC\fR. Default value is zero (no spreading). Other defined values are 1 for centre spreading and 2 for down spreading. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH CONFORMING TO The SMP PHY TEST function was introduced in SAS\-1.1 and enhanced in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2006\-2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, sg_senddiag(sg3_utils) smp_utils-0.97/doc/smp_ena_dis_zoning.80000664000175000017500000000773311620776341017212 0ustar douggdougg.TH SMP_ENA_DIS_ZONING "8" "June 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_ena_dis_zoning \- invoke ENABLE DISABLE ZONING SMP function .SH SYNOPSIS .B smp_ena_dis_zoning [\fI\-\-disable\fR] [\fI\-\-ena\-dis=ED\fR] [\fI\-\-expected=EX\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-save=SAV\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) ENABLE DISABLE ZONING function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fI\-\-sa=SAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .PP If neither \fI\-\-disable\fR nor \fI\-\-ena\-dis=ED\fR options are given then enable zoning (i.e. "\-\-ena\-dis=1") is assumed. .PP This function does not change the state of the current zoning enabled flag (as seen in the REPORT GENERAL response). Such a state change will occur on a subsequent invocation of the ZONE ACTIVATE function. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-d\fR, \fB\-\-disable\fR set the 'enable disable zoning' field in the SMP request to 2 which will disable zoning. .TP \fB\-e\fR, \fB\-\-ena\-dis\fR=\fIED\fR set the 'enable disable zoning' field in the SMP request. \fIED\fR may take these values: 0 for no change, 1 for enable zoning (default) and 2 for disable zoning. If this option and the \fI\-\-disable\fR option are both given then they cannot contradict one another. .TP \fB\-E\fR, \fB\-\-expected\fR=\fIEX\fR set the 'expected expander change count' field in the SMP request. The value \fIEX\fR is from 0 to 65535 inclusive with 0 being the default value. When \fIEX\fR is greater than zero then if the value doesn't match the expander change count of the SMP target (i.e. the expander) when the request arrives then the target ignores the request and sets a function result of "invalid expander change count" in the response. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. The mpt interface needs this option and it will typically be an expander's SAS address. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-S\fR, \fB\-\-save\fR=\fISAV\fR set the 'save' field in the SMP request. \fISAV\fR may take these values: 0 for updating the shadow values (default), 1 for updating the saved values, 2 for updating shadow values and if available the saved values, 3 for updating both saved and shadow values. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times. .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH CONFORMING TO The SMP ENABLE DISABLE ZONING function was introduced in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_lock, smp_zone_activate, smp_zone_unlock(smp_utils) smp_utils-0.97/doc/smp_write_gpio.80000664000175000017500000001250611620776341016366 0ustar douggdougg.TH SMP_WRITE_GPIO "8" "August 2011" "smp_utils\-0.97" SMP_UTILS .SH NAME smp_write_gpio \- invoke WRITE GPIO REGISTER (ENHANCED) SMP function .SH SYNOPSIS .B smp_write_gpio [\fI\-\-count=CO\fR] [\fI\-\-data=H,H...\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-index=IN\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-type=TY\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) WRITE GPIO REGISTER or a WRITE GPIO REGISTER ENHANCED function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fISAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .PP This function is defined in SFF\-8485 ( see www.sffcommittee.com ) together with its corresponding READ GPIO REGISTER (ENHANCED) SMP function. The other SMP functions are defined in SAS documents at www.t10.org . SFF\-8485 defines a curious device called a "virtual SMP port" that lives in a host bus adapter (HBA) and allows SMP to manipulate the sideband signals in wide internal cables. To stop other initiators in a multi\-initiator domain from accessing those sideband signals, the virtual SMP (target) port is not indicated in a DISCOVER response. .PP For notes on the SMP WRITE GPIO REGISTER ENHANCED function see the section on the ENHANCED FUNCTION below. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-c\fR, \fB\-\-count\fR=\fICO\fR where \fICO\fR is the register count. This is the number of (4 byte) registers to send. The default value is 1. .TP \fB\-d\fR, \fB\-\-data\fR=\fIH,H...\fR this option supplies a comma separated list of hexadecimal bytes (0 to ff inclusive) that will be used as write data in the WRITE GPIO REGISTER request. The number of bytes supplied should be four times \fI\-\-count=C\fR The first 4 bytes will become the first register written. .TP \fB\-d\fR, \fB\-\-data\fR=\fB-\fR reads string of hexadecimal bytes from stdin. Spaces, tabs and line feeds additionally are permitted as separators. .TP \fB\-E\fR, \fB\-\-enhanced\fR sends a WRITE GPIO REGISTER ENHANCED function request (default: send a WRITE GPIO REGISTER function request). .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-i\fR, \fB\-\-index\fR=\fIIN\fR where \fIIN\fR is the register index. This value is origin zero and its default value is 0. The request will send \fI\-\-count=CO\fR registers starting from \fI\-\-index=IN\fR of the given \fI\-\-type=TY\fR. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if the \fISMP_DEVICE\fR has the target's SAS address within it. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-t\fR, \fB\-\-type\fR=\fITY\fR where \fITY\fR is the register type. The default value is 0 (GPIO_CFG). The request will send \fI\-\-count=CO\fR registers starting from \fI\-\-index=IN\fR of the given \fI\-\-type=TY\fR. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times. .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH ENHANCED FUNCTION In the technical review of SAS\-2 prior to standardization in this t10 document: 08\-212r8.pdf (page 871 or 552) there is a comment that the READ GPIO REGISTER and WRITE GPIO REGISTER function headers (i.e. first 4 bytes) do not comply with all the other SMP functions in SAS-2. .PP There is a suggestion that enhanced variants be introduced in the next version of the SFF\-8485 document. If that ever happened then it has not been made public. In SAS\-2.1 both the READ and WRITE GPIO REGISTER functions have been made obsolete and the corresponding ENHANCED function numbers are "restricted" for SFF\-8485. .PP If the \fI\-\-enhanced\fR option is given then the ENHANCED function number is sent; the register type, index and count fields (1 byte each) are increased by two byte positions leaving enough space for a compliant SAS\-2 SMP header to be built. .SH CONFORMING TO The SMP WRITE GPIO REGISTER function is defined in SFF\-8485 (see www.sffcommittee.com ) together with its corresponding READ GPIO REGISTER SMP function. .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2006\-2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_read_gpio(smp_utils) smp_utils-0.97/doc/smp_rep_zone_man_pass.80000664000175000017500000000644611620776341017726 0ustar douggdougg.TH SMP_REP_ZONE_MAN_PASS "8" "May 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_rep_zone_man_pass \- invoke REPORT ZONE MANAGER PASSWORD function .SH SYNOPSIS .B smp_rep_zone_man_pass [\fI\-\-fpass=FP\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-phex\fR] [\fI\-\-raw\fR] [\fI\-\-report=RT\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) REPORT ZONE MANAGER PASSWORD function requests to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fI\-\-sa=SAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-F\fR, \fB\-\-fpass\fR=\fIFP\fR where \fIFP\fR is the name of a file which the password will be written to. The default action (in the absence of this option) is to write the password to stdout. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. To only see the password in hexadecimal use the \fI\-\-phex\fR option. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-p\fR, \fB\-\-phex\fR Output the password in comma separated hexadecimal bytes. In the absence of this option the password is output in ASCII surrounded by single quotes. Note the hexadecimal bytes are output with a hex indication (i.e. there is nos leading "0x" nor trailing "h"). .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-R\fR, \fB\-\-report\fR=\fIRT\fR set the 'report type' field in the SMP request. \fIRT\fR may take these values: 0 for report the current zone manager password (default); 1 is reserved; 2 for report the saved zone manager password; 3 for report the default zone manager password. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. The mpt interface needs this option and it will typically be an expander's SAS address. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times. .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH CONFORMING TO The SMP REPORT ZONE MANAGER PASSWORD function was introduced in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_conf_zone_man_pass, smp_zone_lock(smp_utils) smp_utils-0.97/doc/smp_rep_route_info.80000664000175000017500000001136111620776341017233 0ustar douggdougg.TH SMP_REP_ROUTE_INFO "8" "May 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_rep_route_info \- invoke REPORT ROUTE INFORMATION SMP function .SH SYNOPSIS .B smp_rep_route_info [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-index=IN\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-multiple\fR] [\fI\-\-num=NUM\fR] [\fI\-\-phy=ID\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] [\fI\-\-zero\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) REPORT ROUTE INFORMATION function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fISAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .PP There are two expander route table types: phy-based and expander-based. The expander-based route table was introduced in SAS\-2 and supersedes the phy-based route tables. The REPORT ROUTE INFORMATION function is associated with a phy-based route table. The CONFIGURE ROUTE INFORMATION function is provided to manually set up a phy-based route table. .PP Each phy in a SAS expander that has an associated routing attribute of "table" has a router table. The number of rows (or entries) in each router table is given by the "expander route indexes" field in the response of the REPORT GENERAL function. .PP When the \fI\-\-multiple\fR option is given, the REPORT ROUTE INFORMATION function is called multiple times. The index value increments on each iteration, starting from \fI\-\-index=IN\fR (default 0). If \fI\-\-num=NUM\fR is given and \fINUM\fR is greater than zero then that is the maximum number of iterations performed. If \fI\-\-num=NUM\fR is not given (or \fINUM\fR is zero) then iterations continue until there are 4 adjacent disabled route entries (or some error is detected). .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-i\fR, \fB\-\-index\fR=\fIIN\fR expander route index. \fIIN\fR is a value between 0 and 65535. Default is 0. More precisely the maximum index value is (expander_route_indexes \- 1). .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-m\fR, \fB\-\-multiple\fR call the REPORT ROUTE INFORMATION function multiple times, starting at \fI\-\-index=IN\fR, incrementing the index value on each iteration for a maximum of \fI\-\-num=NUM\fR iterations. For each enabled route table entry, one line is output. If \fI\-\-num=NUM\fR is not given (or \fINUM\fR is zero) then iterations continue until 4 adjacent disabled entries are found (or some error occurs). .TP \fB\-n\fR, \fB\-\-num\fR=\fINUM\fR used with \fI\-\-multiple\fR option to specify the maximum number of iterations. .TP \fB\-p\fR, \fB\-\-phy\fR=\fIID\fR phy identifier. \fIID\fR is a value between 0 and 254. Default is 0. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if the \fISMP_DEVICE\fR has the target's SAS address within it. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times. .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .TP \fB\-z\fR, \fB\-\-zero\fR zero the Allocated Response Length field in the request. This option also zeros the Request Length field in the request. This is required for strict SAS\-1.1 compliance. However this option should not be given in SAS\-2 and later; if it is given an abridged response may result. .SH CONFORMING TO The SMP REPORT ROUTE INFORMATION function was introduced in SAS\-1 . The "Expander change count" field was added in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2006\-2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_rep_general(smp_utils) smp_utils-0.97/doc/smp_discover.80000664000175000017500000002227611675012613016034 0ustar douggdougg.TH SMP_DISCOVER "8" "December 2011" "smp_utils\-0.97" SMP_UTILS .SH NAME smp_discover \- invoke DISCOVER SMP function .SH SYNOPSIS .B smp_discover [\fI\-\-adn\fR] [\fI\-\-brief\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-ignore\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-list\fR] [\fI\-\-multiple\fR] [\fI\-\-my\fR] [\fI\-\-num=NUM\fR] [\fI\-\-phy=ID\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-summary\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] [\fI\-\-zero\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends one or more SAS Serial Management Protocol (SMP) DISCOVER function requests to an SMP target and decodes or outputs the responses. The SMP target is identified by the \fISMP_DEVICE\fR and the \fISAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .PP If the \fI\-\-phy=ID\fR option is not given then \fI\-\-summary\fR is assumed. When \fI\-\-summary\fR is given or assumed, this utility shows the disposition of each active expander phy in table form. One row is shown for each phy and is described in the SINGLE LINE PER PHY FORMAT section below. For this purpose disabled and errored expander phys are considered "active" and can be suppressed from the output by adding the \fI\-\-brief\fR option. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-A\fR, \fB\-\-adn\fR causes the "attached device name" field to be output when the \fI\-\-multiple\fR or \fI\-\-summary\fR option is also given. See the section below on SINGLE LINE PER PHY FORMAT. Note the "attached device name" field was added is SAS\-2. .TP \fB\-b\fR, \fB\-\-brief\fR reduce the decoded response output. If used twice will exit if there is no attached device (after outputting that). When used with \fI\-\-multiple\fR, unattached phys are not listed; when used twice, trims attached phys output. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-i\fR, \fB\-\-ignore\fR sets the Ignore Zone Group bit in the SMP Discover request. Expander phys hidden by zoning will appear as "phy vacant" unless this option is given. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-l\fR, \fB\-\-list\fR list attributes in "name=value" form, one entry per line. .TP \fB\-m\fR, \fB\-\-multiple\fR loops over multiple phys within SMP target (typically an expander) and does a DISCOVER request and outputs a one line summary. Phy 0 is queried first, then phy 1, continuing until an error occurs. If \fI\-\-brief\fR is given then there is no output for phys that indicate there is no attached device; when used twice additionally trims the output line of attached phys. See the section below on SINGLE LINE PER PHY FORMAT. .TP \fB\-M\fR, \fB\-\-my\fR outputs my (this expander's) SAS address in hex (prefixed by "0x"). This is obtained from the DISCOVER response of phy id 0 (unless \fI\-\-phy=ID\fR is given). The expander's SAS address is typically available even if a phy is not connected, "vacant" or disabled. This option overrides most other options (e.g. overrides \fI\-\-multiple\fR and \fI\-\-summary\fR options). .TP \fB\-n\fR, \fB\-\-num\fR=\fINUM\fR number of phys to fetch, starting at \fI\-\-phy=ID\fR when the \fI\-\-multiple\fR option is given. The default value is 0 which is interpreted as "the rest" (i.e. until a "phy does not exist" function result is received). This option is ignored in the absence of the \fI\-\-multiple\fR option. .TP \fB\-p\fR, \fB\-\-phy\fR=\fIID\fR phy identifier. \fIID\fR is a value between 0 and 254. If this option is not given then the \fI\-\-summary\fR option is assumed. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if the \fISMP_DEVICE\fR has the target's SAS address within it. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-S\fR, \fB\-\-summary\fR output a multi line summary, with one line per active phy. Checks all phys (or less is \fI\-\-num=NUM\fR is given), starting at phy 0 (unless \fI\-\-phy=ID\fR is given). Equivalent to '\-\-multiple \-\-brief' ('\-mb'). See the section below on SINGLE LINE PER PHY FORMAT. If the \fI\-\-phy=ID\fR is not given then this option is assumed. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .TP \fB\-z\fR, \fB\-\-zero\fR zero the Allocated Response Length field in the request. This option also zeros the Request Length field in the request. This is required for strict SAS\-1.1 compliance. However this option should not be given in SAS\-2 and later; if it is given an abridged response may result. .SH SINGLE LINE PER PHY FORMAT The \fI\-\-summary\fR option causes SMP DISCOVER responses to be compressed to a header followed by one line per phy. To save space SAS addresses are shown in hex without a '0x' prefix or 'h' suffix. The header line gives the SAS address of the SMP target itself and assumes it is an expander. .PP Each line starts with " phy :" where is the phy identifier (and they are origin zero). That is followed by the routing attribute represented by a single letter which is either "D" for direct routing, "S" to subtractive routing or "T" for table routing. Then comes the negotiated physical link rate which is either "disabled", "reset problem" or "spinup hold". Other states are mapped to "attached". This includes enabled phys with nothing connected which appear as "attached:[0000000000000000:00]". .PP Information shown between the brackets is for the attached device. Phys that are connected display something like: "attached:[5000c50000520a2a:01 " where the first number is the attached SAS address (in hex) and the second number is the attached device's phy identifier. If the attached device type is other than an end device then one of these abbreviations is output: "exp" (for expander), "fex" (for fanout expander) or "res" (for unknown attached device type). If a phy is flagged as "virtual" then the letter "V" appears next. Next are the protocols supported by the attached device which are shown as "i()" for initiator protocols and/or "t()" for target protocols. The is made up of "PORT_SEL", "SSP", "STP", "SMP" and "SATA" with "+" used as a separator. For example a SAS host adapter wi11 most likely appear as: "i(SSP+STP+SMP)". This completes the information about the attached phy, hence the closing right bracket. .PP If appropriate, the negotiated physical link rate is shown in gigabits per second. Here is an example of a line for expander phy identifier 11 connected to a SATA target (or SATA "device" to use the t13.org term): .PP phy 11:T:attached:[500605b000000afb:00 t(SATA)] 1.5 Gbps .PP If the expander supports zoning (i.e. REPORT GENERAL response bit for 'zoning supported' is set) and a phy's zone group is other than zg 1 then the phy's zone group is shown (e.g. "ZG:2"). .PP If the \fI\-\-adn\fR option is given then after the attached SAS address and the attached device's phy identifier are output an extra field is inserted containing the "attached device name" field. For a SAS disk this should be its target device name (in NAA-5 format) and for a SATA disk its WWN (if provided, also in NAA-5 format). Also when the \fI\-\-adn\fR option is given the phy speed and zone group are not output in order to keep the line length reasonable. .SH NOTES In SAS\-2 and later both the DISCOVER and DISCOVER LIST functions are available. The DISCOVER LIST function should be favoured for several reasons: its response can hold up to 40 descriptors each describing the state of one expander phy. The vast majority of expander chips on the market support 36 phys or less so one DISCOVER LIST response will summarize the states of all its phys. With the DISCOVER function only one expander phy's state is returned in its response. Other advantages of the DISCOVER LIST function are its "phy filter" and "descriptor type" function request fields. .SH EXAMPLES See "Examples" section in http://sg.danny.cz/sg/smp_utils.html .SH CONFORMING TO The SMP DISCOVER function was introduced in SAS\-1, with small additions in SAS\-1.1 . There have been a large number of additions in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2006\-2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_discover_list, smp_phy_control smp_utils-0.97/doc/smp_rep_phy_sata.80000664000175000017500000000612511620776341016674 0ustar douggdougg.TH SMP_REP_PHY_SATA "8" "May 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_rep_phy_sata \- invoke REPORT PHY SATA SMP function .SH SYNOPSIS .B smp_rep_phy_sata [\fI\-\-affiliation=AC\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-phy=ID\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] [\fI\-\-zero\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) REPORT PHY SATA request function to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fISAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify an HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .TP \fB\-a\fR, \fB\-\-affiliation\fR=\fIAC\fR where \fIAC\fR is the affiliation context relative identifier that is placed in request (new in sas2r08). Defaults to 0. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-p\fR, \fB\-\-phy\fR=\fIID\fR phy identifier. \fIID\fR is a value between 0 and 254. Default is 0. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if the \fISMP_DEVICE\fR has the target's SAS address within it. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .TP \fB\-z\fR, \fB\-\-zero\fR zero the Allocated Response Length field in the request. This option also zeros the Request Length field in the request. This is required for strict SAS\-1.1 compliance. However this option should not be given in SAS\-2 and later; if it is given an abridged response may result. .SH EXAMPLES See "Examples" section in http://sg.danny.cz/sg/smp_utils.html .SH CONFORMING TO The SMP REPORT PHY SATA function was introduced in SAS\-1 . The "Expander change count", "STP I_T nexus loss occurred" and several other fields were added in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2006\-2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_phy_control(smp_utils) smp_utils-0.97/doc/smp_rep_zone_perm_tbl.80000664000175000017500000001477411620776341017734 0ustar douggdougg.TH SMP_REP_ZONE_PERM_TBL "8" "June 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_rep_zone_perm_tbl \- invoke REPORT ZONE PERMISSION TABLE function .SH SYNOPSIS .B smp_rep_zone_perm_tbl [\fI\-\-append\fR] [\fI\-\-bits=COL\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-multiple\fR] [\fI\-\-nocomma\fR] [\fI\-\-num=MD\fR] [\fI\-\-permf=FN\fR] [\fI\-\-raw\fR] [\fI\-\-report=RT\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-start=SS\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends one or more SAS Serial Management Protocol (SMP) REPORT ZONE PERMISSION TABLE function requests to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fI\-\-sa=SAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .PP This SMP function returns zone permission descriptors which represent rows of the zone permission table. There is a row for each source zone group starting at zone group 0 and finishing at zone group 127 or zone group 255. Due to the SMP response size restriction of 1028 bytes (including trailing CRC), not all the zone permission table rows can be returned in one REPORT ZONE PERMISSION TABLE function response. So multiple function calls may be required with the \fI\-\-start=SS\fR option being used on the latter calls to specify the next starting source zone group. .PP The \fI\-\-multiple\fR option will send multiple REPORT ZONE PERMISSION TABLE requests until all source zone groups (or starting from \fI\-\-start=SS\fR) are output. This option is the most convenient way to output the whole zone permission table. In the absence of the \fI\-\-multiple\fR option only one REPORT ZONE PERMISSION TABLE request is sent. .PP The output of this utility is designed to be useful as input to the smp_conf_zone_perm_tbl utility. In other words these utilities can be used to save and restore zone permission table settings. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-a\fR, \fB\-\-append\fR used in conjunction with \fI\-\-permf=FN\fR to append to \fIFN\fR if it already exists. If \fIFN\fR does not exist then it is created. .TP \fB\-B\fR, \fB\-\-bits\fR=\fICOL\fR This is an alternate zone permission table represention showing single bits with the origin (i.e. ZP[0,0]) in the top left. The output is a bit array with \fICOL\fR columns and up to \fICOL\fR rows. This output resembles the example zone permission tables shown in the SAS draft documents (at t10.org). The default (i.e. without this option) is output that reflects the byte oriented, big endian nature of SCSI (and hence SMP) commands. The output produced by this option is not suitable as input for the smp_conf_zone_perm_tbl utility. .TP \fB\-f\fR, \fB\-\-start\fR=\fISS\fR starting (first and lowest numbered) source zone group (default: zone group 0). .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-m\fR, \fB\-\-multiple\fR starting at source zone group 0 (or \fISS\fR), multiple REPORT ZONE PERMISSION TABLE requests are issued until the last (127th and 255th) source zone descriptor is output. This option should not be given together with the \fI\-\-num=MD\fR option. .TP \fB\-N\fR, \fB\-\-nocomma\fR output each zone group descriptor as a long string of hexadecimal digits, two digits per byte. Default action is to output a comma separated list of hexadecimal ASCII bytes for each zone group descriptor. .TP \fB\-n\fR, \fB\-\-num\fR=\fIMD\fR where \fIMD\fR is the maximum number of descriptors that can be reported in the one response. The default value is 63. 63 is the maximum number of "128 zone groups" sized descriptors that can fit in one response. If the expander is using "256 zone groups" sized descriptors then a maximum of 31 descriptors can fit in one response. This option should not be given together with the \fI\-\-multiple\fR option. .TP \fB\-P\fR, \fB\-\-permf\fR=\fIFN\fR \fIFN\fR is a file to write the zone permission descriptors to. The default action is to output the zone permissions descriptors to stdout. Note that the whole permissions table may not fit in one response. If the \fIFN\fR exists then it is truncated prior to the write unless \fI\-\-append\fR is given. To append to the existing \fIFN\fR add the \fI\-\-append\fR option. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-R\fR, \fB\-\-report\fR=\fIRT\fR set the 'report type' field in the SMP request. \fIRT\fR may take these values: 0 for report current values (default); 1 for report the shadow values; 2 for report saved values; 3 for report default values. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. The mpt interface needs this option and it will typically be an expander's SAS address. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-f\fR, \fB\-\-start\fR=\fISS\fR See entry above, listed in order by its short option letter (i.e. \fI\-f\fR). .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times. .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH NOTES When the \fI\-\-permf=FN\fR is given and \fISS\fR is greater than zero then a line of the form "\-\-start=\fISS\fR" is written to \fIFN\fR just prior to the first row of zone permissions. .PP There are some examples of the \fI\-\-permf=FN\fR format in the examples directory. .SH CONFORMING TO The SMP REPORT ZONE PERMISSION TABLE function was introduced in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_conf_zone_perm_tbl, smp_zone_lock(smp_utils) smp_utils-0.97/doc/smp_zoned_broadcast.80000664000175000017500000001172311620776341017357 0ustar douggdougg.TH SMP_ZONED_BROADCAST "8" "June 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_zoned_broadcast \- invoke ZONED BROADCAST SMP function .SH SYNOPSIS .B smp_zoned_broadcast [\fI\-\-broadcast=BT\fR] [\fI\-\-expected=EX\fR] [\fI\-\-fszg=FS\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-szg=ZGL\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) ZONED BROADCAST function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fI\-\-sa=SAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .PP This function requires zoning to be enabled. To send a Broadcast (Change) in the absence of zoning, the least intrusive way seems to be to use a PHY CONTROL request to send a link reset to an expander phy. Broadcast (Change) should cause a management application client behind an SMP initiator port (e.g. a SAS HBA) to start a discover process. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-b\fR, \fB\-\-broadcast\fR=\fIBT\fR \fIBT\fR is the broadcast type, an integer in the range 0 (default) to 15. Broadcast (Change) corresponds to 0 and will cause SMP initiators that receive it to do their discover process. Other known broadcast types are listed in the NOTES section. \fIBT\fR may be decimal (default) or hexadecimal prefixed by '0x' (or '0X') or with a 'h' (or 'H') suffix. .TP \fB\-E\fR, \fB\-\-expected\fR=\fIEX\fR set the 'expected expander change count' field in the SMP request. The value \fIEX\fR is from 0 to 65535 inclusive with 0 being the default value. When \fIEX\fR is greater than zero then if the value doesn't match the expander change count of the SMP target (i.e. the expander) when the request arrives then the target ignores the request and sets a function result of "invalid expander change count" in the response. In SPL\-1 this field is marked as "restricted (for expected expander change count)". .TP \fB\-F\fR, \fB\-\-fszg\fR=\fIFS\fR where \fIFS\fR is the name of a file which contains one or more source zone groups to send a broadcast to. The zone groups can be given in decimal (default) or hexadecimal prefixed by '0x' (or '0X') or with a 'h' (or 'H') suffix. A zone group is a number in the range 0 to 255. Each zone group can be separated by space, tab, comma or newline. Empty lines and those starting with "#" are ignored. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. The mpt interface needs this option and it will typically be an expander's SAS address. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-S\fR, \fB\-\-szg\fR=\fIZGL\fR one or more source zone groups for broadcast can appear as a comma separated list \fIZGL\fR. The may be decimal (default) or hexadecimal prefixed by '0x' (or '0X') or with a 'h' (or 'H') suffix. A zone group is a number in the range 0 to 255. Either this option or \fI\-\-fszg=FS\fR (but not both) should be given. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times. .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH NOTES The following is a list of broadcast types: .br 0 Broadcast (Change) .br 1 Broadcast (Reserved change 0) .br 2 Broadcast (Reserved change 1) .br 3 Broadcast (SES) .br 4 Broadcast (Expander) .br 5 Broadcast (Asynchronous event) .br 6 Broadcast (Reserved 3) .br 7 Broadcast (Reserved 4) .br 8 Broadcast (Zone activate) .PP The remaining zone types (9 to 15) may be issued by the ZONED BROADCAST function. .SH CONFORMING TO The SMP ZONED BROADCAST function was introduced in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_zone_lock, smp_zone_unlock, smp_ena_dis_zoning(smp_utils) smp_utils-0.97/doc/smp_conf_general.80000664000175000017500000001124011620776341016632 0ustar douggdougg.TH SMP_CONF_GENERAL "8" "June 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_conf_general \- invoke CONFIGURE GENERAL SMP function .SH SYNOPSIS .B smp_conf_general [\fI\-\-connect=CO\fR] [\fI\-\-expected=EX\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-inactivity=IN\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-nexus=NE\fR] [\fI\-\-open=OP\fR] [\fI\-\-power=PD\fR] [\fI\-\-raw\fR] [\fI\-\-reduced=RE\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) CONFIGURE GENERAL function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fI\-\-sa=SAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-c\fR, \fB\-\-connect\fR=\fICO\fR sets the "update STP maximum connect time limit" flag and the corresponding "STP maximum connect time limit" field to \fICO\fR. Unit of \fICO\fR is 100 microseconds. A \fICO\fR of zero is taken to mean no maximum connection time limit. .TP \fB\-E\fR, \fB\-\-expected\fR=\fIEX\fR set the 'expected expander change count' field in the SMP request. The value \fIEX\fR is from 0 to 65535 inclusive with 0 being the default value. When \fIEX\fR is greater than zero then if the value doesn't match the expander change count of the SMP target (i.e. the expander) when the request arrives then the target ignores the request and sets a function result of "invalid expander change count" in the response. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-i\fR, \fB\-\-inactivity\fR=\fIIN\fR sets the "update STP bus inactivity time limit" flag and the corresponding "STP bus inactivity time limit" field to \fIIN\fR. Unit of \fIIN\fR is 100 microseconds. A \fIIN\fR of zero is taken to mean no bus inactivity time limit. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-n\fR, \fB\-\-nexus\fR=\fINE\fR sets the "update STP SMP I_T nexus loss time" flag and the corresponding "STP SMP I_T nexus loss time" field to \fINE\fR. Unit of \fINE\fR is one millisecond. A \fINE\fR of zero is taken to mean a vendor specific amount of time; a \fINE\fR of 65535 means the port shall never recognize an I_T nexus loss. .TP \fB\-o\fR, \fB\-\-open\fR=\fIOP\fR sets the "update STP reject to open limit" flag and the corresponding "STP reject to open limit" field to \fIOP\fR. Unit of \fIOP\fR is 10 microseconds. .TP \fB\-p\fR, \fB\-\-power\fR=\fIPD\fR sets the "update power done timeout" flag and the corresponding "power doen timeout" field to \fIPD\fR. Unit of \fIPD\fR is 1 second. A \fIPD\fR value of 0 is interpreted as don't change the current value. The maximum value of \fIPD\fR is 255 and means the time limit is vendor specific. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-R\fR, \fB\-\-reduced\fR=\fIRE\fR sets the "update Initial time to reduced functionality" flag and the corresponding "Initial time to reduced functionality" field to \fIRE\fR. Unit of \fIRE\fR is 100 milliseconds. The maximum permitted \fIRE\fR value is 255 which corresponds to 25.5 seconds. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if the \fISMP_DEVICE\fR has the target's SAS address within it. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH CONFORMING TO The SMP CONFIGURE GENERAL function was introduced in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2006\-2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_rep_general(smp_utils) smp_utils-0.97/doc/smp_read_gpio.80000664000175000017500000001176711620776341016157 0ustar douggdougg.TH SMP_READ_GPIO "8" "August 2011" "smp_utils\-0.97" SMP_UTILS .SH NAME smp_read_gpio \- invoke READ GPIO REGISTER (ENHANCED) SMP function .SH SYNOPSIS .B smp_read_gpio [\fI\-\-count=CO\fR] [\fI\-\-enhanced\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-index=IN\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-type=TY\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) READ GPIO REGISTER or READ GPIO REGISTER ENHANCED function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fISAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .PP This function is defined in SFF\-8485 ( see www.sffcommittee.com ) together with its corresponding WRITE GPIO REGISTER SMP function. The other SMP functions are defined in SAS documents at www.t10.org . SFF\-8485 defines a curious device called a "virtual SMP port" that lives in a host bus adapter (HBA) and allows SMP to manipulate the sideband signals on wide internal cables. To stop other initiators in a multi\-initiator domain from accessing those sideband signals, the virtual SMP (target) port is not indicated in a DISCOVER response. .PP For notes on the SMP READ GPIO REGISTER ENHANCED function see the section on the ENHANCED FUNCTION below. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-c\fR, \fB\-\-count\fR=\fICO\fR where \fICO\fR is the register count. This is the number of (4 byte) registers to request. The default value is 1. .TP \fB\-E\fR, \fB\-\-enhanced\fR sends a READ GPIO REGISTER ENHANCED function request (default: send a READ GPIO REGISTER function request). .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-i\fR, \fB\-\-index\fR=\fIIN\fR where \fIIN\fR is the register index. This value is origin zero and its default value is 0. If the request succeeds, then \fI\-\-count=CO\fR registers starting from \fI\-\-index=IN\fR of the given \fI\-\-type=TY\fR should be in the response. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if the \fISMP_DEVICE\fR has the target's SAS address within it. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-t\fR, \fB\-\-type\fR=\fITY\fR where \fITY\fR is the register type. The default value is 0 (GPIO_CFG). If the request succeeds, then \fI\-\-count=CO\fR registers starting from \fI\-\-index=IN\fR of the given \fI\-\-type=TY\fR should be in the response. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH ENHANCED FUNCTION In the technical review of SAS\-2 prior to standardization in this t10 document: 08\-212r8.pdf (page 871 or 552) there is a comment that the READ GPIO REGISTER and WRITE GPIO REGISTER function headers (i.e. first 4 bytes) do not comply with all the other SMP functions in SAS-2. .PP There is a suggestion that enhanced variants be introduced in the next version of the SFF\-8485 document. If that ever happened then it has not been made public. In SAS\-2.1 both the READ and WRITE GPIO REGISTER functions have been made obsolete and the corresponding ENHANCED function numbers are "restricted" for SFF\-8485. .PP If the \fI\-\-enhanced\fR option is given then the ENHANCED function number is sent; the register type, index and count fields (1 byte each) are increased by two byte positions leaving enough space for a compliant SAS\-2 SMP header to be built. .SH EXAMPLES See "Examples" section in http://sg.danny.cz/sg/smp_utils.html .SH CONFORMING TO The SMP READ GPIO REGISTER (ENHANCED) function is defined in SFF\-8485 (see www.sffcommittee.com ) together with its corresponding WRITE GPIO REGISTER (ENHANCED) SMP function. .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2006\-2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_write_gpio(smp_utils) smp_utils-0.97/doc/smp_zone_unlock.80000664000175000017500000000661511620776341016550 0ustar douggdougg.TH SMP_ZONE_UNLOCK "8" "June 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_zone_unlock \- invoke ZONE UNLOCK SMP function .SH SYNOPSIS .B smp_zone_unlock [\fI\-\-activate\fR] [\fI\-\-expected=EX\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) ZONE UNLOCK function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fI\-\-sa=SAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .PP If this function is successful then a Broadcast (Change) is sent from either each zone group whose zone permission table entries or zone phy information has changed; or from zone group 1. Broadcast (Change) should cause a management application client behind an SMP initiator port (e.g. a SAS HBA) to start a discover process. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-a\fR, \fB\-\-activate\fR sets the ACTIVATE REQUIRED bit in the function request. When it is set the function call will fail with a function result of NOT ACTIVATED if the expander has not "processed the activate step". .TP \fB\-E\fR, \fB\-\-expected\fR=\fIEX\fR set the 'expected expander change count' field in the SMP request. The value \fIEX\fR is from 0 to 65535 inclusive with 0 being the default value. When \fIEX\fR is greater than zero then if the value doesn't match the expander change count of the SMP target (i.e. the expander) when the request arrives then the target ignores the request and sets a function result of "invalid expander change count" in the response. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. The mpt interface needs this option and it will typically be an expander's SAS address. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times. .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH CONFORMING TO The SMP ZONE UNLOCK function was introduced in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_zone_activate, smp_zone_lock, smp_ena_dis_zoning(smp_utils) smp_utils-0.97/doc/smp_rep_phy_event.80000664000175000017500000000767711675012613017075 0ustar douggdougg.TH SMP_REP_PHY_EVENT "8" "December 2011" "smp_utils\-0.97" SMP_UTILS .SH NAME smp_rep_phy_event \- invoke REPORT PHY EVENT SMP function .SH SYNOPSIS .B smp_rep_phy_event [\fI\-\-desc\fR] [\fI\-\-enumerate\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-long\fR] [\fI\-\-phy=ID\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] [\fI\-\-zero\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) REPORT PHY EVENT function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fISAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .PP Reports zero or more phy event descriptors. Each descriptor contains a phy event source, a phy event (i.e. a count) and a peak value detector theshold. At least one phy event should be maintained for each phy. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-d\fR, \fB\-\-desc\fR precede each phy event descriptor with a line announcing its descriptor index number. Index numbers start at 1. .TP \fB\-e\fR, \fB\-\-enumerate\fR enumerate all of the known Phy Event Source names, one per line preceded by its value in hex. Ignores \fISMP_DEVICE\fR if it is given; most other options are also ignored. Exits after displaying the names. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-l\fR, \fB\-\-long\fR prefix each phy event source string with its numeric identifier in hex. For example: "[0x1]: Invalid word count: 23" .TP \fB\-p\fR, \fB\-\-phy\fR=\fIID\fR phy identifier. \fIID\fR is a value between 0 and 254. Default is 0. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if the \fISMP_DEVICE\fR has the target's SAS address within it. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH NOTES Similar information is maintained for SAS SSP target phys (e.g. on a SAS disk). It can be obtained from the Protocol Specific Port log page with the sg_logs utility. .PP Similar information may be obtained for SAS initiator phys (e.g. on a SAS HBA). As an example in Linux 2.6.28 error information can be found in this directory /sys/class/sas_phy/phy-4:0 (for the phy 0 in SCSI/SAS host 4). .PP Similar information may be obtained for SATA device phys (e.g. on a SATA disk). If there is a SAT layer between OS and the SATA device then the sg_sat_phy_event utility can fetch the information. .SH CONFORMING TO The SMP REPORT PHY EVENT function was introduced in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_phy_control, smp_rep_phy_event_list(smp_utils) .B sg_logs, sg_sat_phy_event(sg3_utils) smp_utils-0.97/doc/smp_conf_zone_man_pass.80000664000175000017500000001173211620776341020057 0ustar douggdougg.TH SMP_CONF_ZONE_MAN_PASS "8" "June 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_conf_zone_man_pass \- invoke CONFIGURE ZONE MANAGER PASSWORD function .SH SYNOPSIS .B smp_conf_zone_man_pass [\fI\-\-expected=EX\fR] [\fI\-\-fpass=FP\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-new\-fpass=NF\fR] [\fI\-\-new\-pass=NP\fR] [\fI\-\-password=PA\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-save=SAV\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) CONFIGURE ZONE MANAGER PASSWORD function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fI\-\-sa=SAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-E\fR, \fB\-\-expected\fR=\fIEX\fR set the 'expected expander change count' field in the SMP request. The value \fIEX\fR is from 0 to 65535 inclusive with 0 being the default value. When \fIEX\fR is greater than zero then if the value doesn't match the expander change count of the SMP target (i.e. the expander) when the request arrives then the target ignores the request and sets a function result of "invalid expander change count" in the response. .TP \fB\-F\fR, \fB\-\-fpass\fR=\fIFP\fR where \fIFP\fR is the name of a file which contains the existing password. The password may be in ASCII in which case it is on one line surrounded by either single quotes are double quotes. Alternatively the password may be given in ASCII hexadecimal; either as bytes separated by space, tab, comma or newline, or as longer strings of hexadecimal bytes in which every 2 digits represents a byte. Empty lines and those starting with "#" are ignored. A line starting with '-1' causes all remaining bytes in the password to be filled with 0xff. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-N\fR, \fB\-\-new\-fpass\fR=\fINF\fR where \fINF\fR is the name of a file which contains the new password. The format of this file is the same as the file given in \fI\-\-fpass=FP\fR. .TP \fB\-n\fR, \fB\-\-new\-pass\fR=\fINP\fR where \fINP\fR is the new zone manager password which may be up to 32 bytes long. This option cannot be give together with the \fI\-\-new\-fpass=NF\fR option. The default password is 32 NULLs (zero bytes) and \fIPA\fR is padded with NULLs to the right (to make it 32 bytes long in the request). .TP \fB\-P\fR, \fB\-\-password\fR=\fIPA\fR where \fIPA\fR is the existing zone manager password which may be up to 32 bytes long. This option cannot be give together with the \fI\-\-fpass=FP\fR option. The default password is 32 NULLs (zero bytes) and \fIPA\fR is padded with NULLs to the right (to make it 32 bytes long in the request). .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. The mpt interface needs this option and it will typically be an expander's SAS address. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-S\fR, \fB\-\-save\fR=\fISAV\fR set the 'save' field in the SMP request. \fISAV\fR may take these values: 0 for updating the shadow values (default), 1 for updating the saved values, 2 for updating shadow values and if available the saved values, 3 for updating both saved and shadow values. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times. .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH NOTES Hexadecimal bytes (or longer hexadecimal strings) should not have a leading "0x" or trailing "h" decoration. .PP The "well known" DISABLE password is 32 bytes of 0xff. The new password can only be DISABLED if physical presence is supported and asserted. .SH CONFORMING TO The SMP CONFIGURE ZONE MANAGER PASSWORD function was introduced in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_zone_lock, smp_rep_zone_man_pass(smp_utils) smp_utils-0.97/doc/smp_rep_self_conf_stat.80000664000175000017500000001055311620776341020055 0ustar douggdougg.TH SMP_REP_SELF_CONF_STAT "8" "May 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_rep_self_conf_stat \- invoke REPORT SELF-CONFIGURATION STATUS SMP function .SH SYNOPSIS .B smp_rep_self_conf_stat [\fI\-\-brief\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-index=SDI\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-last\fR] [\fI\-\-one\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) REPORT SELF-CONFIGURATION STATUS function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fI\-\-sa=SAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-b\fR, \fB\-\-brief\fR lessen the amount of header information output and compress each self confuration status descriptor to one line of output. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-i\fR, \fB\-\-index\fR=\fISDI\fR \fISDI\fR is the starting self-configuration status descriptor index, an integer in the range 0 to 65535. The default value is 1 . If \fISDI\fR is 0 then no descriptors are placed in the response plus the "starting self-configuration status descriptor index" and "total number of self-configuration status descriptors" fields in the response are both set to 0. That makes setting \fISDI\fR to 0 a lot less useful tha it could have been. \fISDI\fR may be decimal (default) or hexadecimal prefixed by '0x' (or '0X') or with a 'h' (or 'H') suffix. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-l\fR, \fB\-\-last\fR Sends a REPORT SELF-CONFIGURATION STATUS request to find out the contents of the "last self-configuration status descriptor index" field in the response. If it is different from \fISDI\fR then it re-issues that request with the "starting self-configuration status descriptor index" field set to the "last" value. Often only the last (i.e. most recent) recorded descriptor is of interest and that is what this option should show. In cases there may be more than one descriptor starting at the last index. .TP \fB\-o\fR, \fB\-\-one\fR If multiple self-configuration status descriptors are found, then only output the first one. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. The mpt interface needs this option and it will typically be an expander's SAS address. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times. .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH NOTES The "last self-configuration status descriptor index" field in the response may indicate the lowest index of the last recorded (i.e. most recent) "clump" of status descriptors placed in the expander's storage. .PP This utility flags the "last self-configuration status descriptor index" descriptor in its output with a ">>>" indication. For brief output the descriptor line starts with ">>>" while for normal output (i.e. when \fI\-\-brief\fR not given) the index has ">>>" placed in front of it. .SH CONFORMING TO The SMP REPORT SELF-CONFIGURATION STATUS function was introduced in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_rep_general, smp_discover, smp_discover_list(smp_utils) smp_utils-0.97/doc/smp_zone_lock.80000664000175000017500000000755211620776341016206 0ustar douggdougg.TH SMP_ZONE_LOCK "8" "June 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_zone_lock \- invoke ZONE LOCK SMP function .SH SYNOPSIS .B smp_zone_lock [\fI\-\-expected=EX\fR] [\fI\-\-fpass=FP\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-inactivity=TL\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-password=PA\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) ZONE LOCK function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fI\-\-sa=SAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-E\fR, \fB\-\-expected\fR=\fIEX\fR set the 'expected expander change count' field in the SMP request. The value \fIEX\fR is from 0 to 65535 inclusive with 0 being the default value. When \fIEX\fR is greater than zero then if the value doesn't match the expander change count of the SMP target (i.e. the expander) when the request arrives then the target ignores the request and sets a function result of "invalid expander change count" in the response. .TP \fB\-F\fR, \fB\-\-fpass\fR=\fIFP\fR where \fIFP\fR is the name of a file which contains the password. The password may be in ASCII in which case it is on one line surrounded by either single quotes are double quotes. Alternatively the password may be given in ASCII hexadecimal; either as bytes separated by space, tab, comma or newline, or as longer strings of hexadecimal bytes in which every 2 digits represents a byte. Empty lines and those starting with "#" are ignored. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-i\fR, \fB\-\-inactivity\fR=\fITL\fR sets the zone lock inactivity time limit to \fITL\fR which has units of 100 milliseconds. The default value is 0 which implies no time limit. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-P\fR, \fB\-\-password\fR=\fIPA\fR where \fIPA\fR is the zone manager password which may be up to 32 bytes long. This option cannot be give together with the \fI\-\-fpass=FP\fR option. The default password is 32 NULLs (zero bytes) and \fIPA\fR is padded with NULLs to the right (to make it 32 bytes long in the request). .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. The mpt interface needs this option and it will typically be an expander's SAS address. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times. .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH CONFORMING TO The SMP ZONE LOCK function was introduced in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_zone_activate, smp_zone_unlock, smp_ena_dis_zoning(smp_utils) smp_utils-0.97/doc/smp_rep_broadcast.80000664000175000017500000000622111620776341017023 0ustar douggdougg.TH SMP_REP_BROADCAST "8" "June 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_rep_broadcast \- invoke REPORT BROADCAST SMP function .SH SYNOPSIS .B smp_rep_broadcast [\fI\-\-broadcast=BT\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) REPORT BROADCAST function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fI\-\-sa=SAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-b\fR, \fB\-\-broadcast\fR=\fIBT\fR \fIBT\fR is the broadcast type, an integer in the range 0 (default) to 15. Broadcast (Change) corresponds to 0. Other known broadcast types are listed in the NOTES section. \fIBT\fR may be decimal (default) or hexadecimal prefixed by '0x' (or '0X') or with a 'h' (or 'H') suffix. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. The mpt interface needs this option and it will typically be an expander's SAS address. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times. .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH NOTES The following is a list of broadcast types: .br 0 Broadcast (Change) .br 1 Broadcast (Reserved change 0) .br 2 Broadcast (Reserved change 1) .br 3 Broadcast (SES) .br 4 Broadcast (Expander) .br 5 Broadcast (Asynchronous event) .br 6 Broadcast (Reserved 3) .br 7 Broadcast (Reserved 4) .br 8 Broadcast (Zone activate) .PP The remaining zone types (9 to 15) may be issued by the ZONED BROADCAST function. .SH CONFORMING TO The SMP REPORT BROADCAST function was introduced in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_zoned_broadcast(smp_utils) smp_utils-0.97/doc/Makefile.am0000664000175000017500000000154211625342432015273 0ustar douggdougg ## Copied from sg3_utils. Some remnants left commented out as examples ## if OS_LINUX man_MANS = \ smp_conf_general.8 smp_conf_phy_event.8 smp_conf_route_info.8 \ smp_conf_zone_man_pass.8 smp_conf_zone_perm_tbl.8 \ smp_conf_zone_phy_info.8 smp_discover.8 smp_discover_list.8 \ smp_ena_dis_zoning.8 smp_phy_control.8 smp_phy_test.8 \ smp_read_gpio.8 smp_rep_broadcast.8 smp_rep_exp_route_tbl.8 \ smp_rep_general.8 smp_rep_manufacturer.8 smp_rep_phy_err_log.8 \ smp_rep_phy_event.8 smp_rep_phy_event_list.8 smp_rep_phy_sata.8 \ smp_rep_route_info.8 smp_rep_self_conf_stat.8 \ smp_rep_zone_man_pass.8 smp_rep_zone_perm_tbl.8 smp_utils.8 \ smp_write_gpio.8 smp_zone_activate.8 smp_zoned_broadcast.8 \ smp_zone_lock.8 smp_zone_unlock.8 ## distclean-local: ## rm -f sg_scan.8 ## sg_scan.8 : sg_scan.8.linux ## cp -p sg_scan.8.linux sg_scan.8 ## endif smp_utils-0.97/doc/smp_rep_exp_route_tbl.80000664000175000017500000000702411620776341017736 0ustar douggdougg.TH SMP_REP_EXP_ROUTE_TBL "8" "May 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_rep_exp_route_tbl \- invoke REPORT EXPANDER ROUTE TABLE LIST SMP function .SH SYNOPSIS .B smp_rep_exp_route_tbl [\fI\-\-brief\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-index=IN\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-num=NUM\fR] [\fI\-\-phy=ID\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) REPORT EXPANDER ROUTE TABLE LIST function request to an SMP target and decodes or outputs the response. The SMP target is identified by the \fISMP_DEVICE\fR and the \fISAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .PP There are two expander route table types: phy-based and expander-based. The expander-based route table was introduced in SAS\-2 and supersedes the phy-based route tables. The REPORT EXPANDER ROUTE TABLE LIST function is associated with an expander-based route table. There is no corresponding CONFIGURE function because a expander-based route table is self-configured. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-b\fR, \fB\-\-brief\fR reduce the decoded response output. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-i\fR, \fB\-\-index\fR=\fIIN\fR \fIIN\fR is the starting routed SAS address index. The default value is 0. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-n\fR, \fB\-\-num\fR=\fINUM\fR maximum number of descriptors to fetch (default is 62). Note that maximum SMP frame size is 1028 bytes (including a trailing 4 byte CRC) so 62 descriptors is the maximum number that can fit in one response. .TP \fB\-p\fR, \fB\-\-phy\fR=\fIID\fR starting phy identifier within bitmap. \fIID\fR should be one of 0 (the default), or a multiple of 48. Note there is only one expnder route table per expander, not one per phy. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if the \fISMP_DEVICE\fR has the target's SAS address within it. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH CONFORMING TO The SMP REPORT EXPANDER ROUTE TABLE LIST function was introduced in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2007\-2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_rep_route_info smp_utils-0.97/doc/smp_conf_phy_event.80000664000175000017500000001351311675012613017216 0ustar douggdougg.TH SMP_CONF_PHY_EVENT "8" "December 2011" "smp_utils\-0.97" SMP_UTILS .SH NAME smp_conf_phy_event \- invoke CONFIGURE PHY EVENT function .SH SYNOPSIS .B smp_conf_phy_event [\fI\-\-clear\fR] [\fI\-\-enumerate\fR] [\fI\-\-expected=EX\fR] [\fI\-\-file=FILE\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-pes=PES,PES...\fR] [\fI\-\-phy=ID\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-thres=THR,THR...\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) CONFIGURE PHY EVENT function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fI\-\-sa=SAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .PP The function request contains zero or more phy event configuration descriptors. Each descriptor is 8 byte long and contains a phy event source (one byte long) and optionally a peak value detector threshold which is 32 bits long (4 bytes). These values can either be supplied on the command line as the arguments to the \fI\-\-pes\fR and \fI\-\-thres\fR options, or within a \fIFILE\fR given to the \fI\-\-file\fR option. .PP Once a phy event source has been configured by this function, its counters should be readable with the REPORT PHY EVENT or REPORT PHY EVENT LIST functions. Peak value detector thresholds should only be non-zero for phy event sources whose type is "peak value detector". If the threshold value is exceeded the expander will originate a Broadcast(Expander). .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-C\fR, \fB\-\-clear\fR sets the CLEAR PEAKS bit the in function request. This will cause all peak value detectors associated with this phy (i.e. \fIID\fR) to be cleared to zero. .TP \fB\-e\fR, \fB\-\-enumerate\fR enumerate all of the known Phy Event Source names, one per line preceded by its value in hex. Ignores \fISMP_DEVICE\fR if it is given; most other options are also ignored. Exits after displaying the names. .TP \fB\-E\fR, \fB\-\-expected\fR=\fIEX\fR set the 'expected expander change count' field in the SMP request. The value \fIEX\fR is from 0 to 65535 inclusive with 0 being the default value. When \fIEX\fR is greater than zero then if the value doesn't match the expander change count of the SMP target (i.e. the expander) when the request arrives then the target ignores the request and sets a function result of "invalid expander change count" in the response. .TP \fB\-f\fR, \fB\-\-file\fR=\fIFILE\fR where \fIFILE\fR is a file name containing pairs of values. The first member of each pair is a phy event source and the second member of the pair is a peak value detector threshold. Values are interpreted as decimal unless prefixed by '0x' or '0X' (or it has a trailing 'h' or 'H'). Everything from and including a "#" on a line is ignored as are blank lines. Values may be comma, space and tab separated or appear on separate lines. This option cannot be present with the \fI\-\-pes\fR option. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-p\fR, \fB\-\-phy\fR=\fIID\fR phy identifier. \fIID\fR is a value between 0 and 254 (default 0). .TP \fB\-P\fR, \fB\-\-pes\fR=\fIPES,PES...\fR where \fIPES,PES...\fR is a string of comma (or space) separated values that are interpreted as phy event sources (each a value from 0 to 255). Each number is interpreted as decimal unless prefixed by '0x' or '0X' (or it has a trailing 'h' or 'H'). An argument that contains any space separators needs to be quoted (or otherwise escaped). When this option is given then the \fI\-\-thres\fR option may also be given and they should contain the same number of elements in their arguments. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. The mpt interface needs this option and it will typically be an expander's SAS address. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-T\fR, \fB\-\-thres\fR=\fITHR,THR...\fR where \fITHR,THR...\fR is a string of comma (or space) separated values that are interpreted as peak value detector thresholds (each a 32 bit value). Each number is interpreted as decimal unless prefixed by '0x' or '0X' (or it has a trailing 'h' or 'H'). An argument that contains any space separators needs to be quoted (or otherwise escaped). When this option is given then the \fI\-\-pes\fR option must also be given and they should contain the same number of elements in their arguments. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times. .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH CONFORMING TO The SMP CONFIGURE PHY EVENT function was introduced in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_rep_phy_event, smp_rep_phy_event_list smp_utils-0.97/doc/smp_zone_activate.80000664000175000017500000000625311620776341017053 0ustar douggdougg.TH SMP_ZONE_ACTIVATE "8" "June 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_zone_activate \- invoke ZONE ACTIVATE SMP function .SH SYNOPSIS .B smp_zone_activate [\fI\-\-expected=EX\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) ZONE ACTIVATE function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fI\-\-sa=SAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .PP This function, if successful, will cause various zoning related shadow values (e.g. zone permission table and zone phy information) to be copied to the corresponding current values. If the saving to "saved" values option has been selected then the various zoning related shadow values will also be copied to the corresponding saved values. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-E\fR, \fB\-\-expected\fR=\fIEX\fR set the 'expected expander change count' field in the SMP request. The value \fIEX\fR is from 0 to 65535 inclusive with 0 being the default value. When \fIEX\fR is greater than zero then if the value doesn't match the expander change count of the SMP target (i.e. the expander) when the request arrives then the target ignores the request and sets a function result of "invalid expander change count" in the response. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. The mpt interface needs this option and it will typically be an expander's SAS address. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times. .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH CONFORMING TO The SMP ZONE ACTIVATE function was introduced in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_zone_lock, smp_zone_unlock, smp_ena_dis_zoning(smp_utils) smp_utils-0.97/doc/smp_conf_route_info.80000664000175000017500000001112611620776341017371 0ustar douggdougg.TH SMP_CONF_ROUTE_INFO "8" "May 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_conf_route_info \- invoke CONFIGURE ROUTE INFORMATION SMP function .SH SYNOPSIS .B smp_conf_route_info [\fI\-\-disable\fR] [\fI\-\-expected=EX\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-index=IN\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-phy=ID\fR] [\fI\-\-raw\fR] [\fI\-\-routed=R_SAS_ADDR\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) CONFIGURE ROUTE INFORMATION function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fI\-\-sa=SAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .PP There are two expander route table types: phy-based and expander-based. The expander-based route table was introduced in SAS\-2 and supersedes the phy-based route tables. The CONFIGURE ROUTE INFORMATION function is associated with a phy-based route table. The REPORT ROUTE INFORMATION function is provided to report phy-based route table entries. .PP Each phy in a SAS expander that has an associated routing attribute of "table" has a router table. The number of rows (or entries) in each router table is given by the "expander route indexes" field in the response of the REPORT GENERAL function. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-d\fR, \fB\-\-disable\fR set the "disable expander route entry" flag in a row of the router table associated with \fI\-\-phy=ID\fR of the given SMP target (e.g. an expander). Within the router table the row that is disabled is identified by the expander route index given by \fI\-\-index=IN\fR. .TP \fB\-E\fR, \fB\-\-expected\fR=\fIEX\fR set the 'expected expander change count' field in the SMP request. The value \fIEX\fR is from 0 to 65535 inclusive with 0 being the default value. When \fIEX\fR is greater than zero then if the value doesn't match the expander change count of the SMP target (i.e. the expander) when the request arrives then the target ignores the request and sets a function result of "invalid expander change count" in the response. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-i\fR, \fB\-\-index\fR=\fIIN\fR expander route index. \fIIN\fR is a value between 0 and 65535. Default is 0. More precisely the maximum index value is (expander_route_indexes \- 1). .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-p\fR, \fB\-\-phy\fR=\fIID\fR phy identifier. \fIID\fR is a value between 0 and 254. Default is 0. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-R\fR, \fB\-\-routed\fR=\fIR_SAS_ADDR\fR specifies the SAS address to be placed in a row (given by \fI\-\-index=IN\fR) of the router table associated with \fI\-\-phy=ID\fR. Default value is 0. The \fIR_SAS_ADDR\fR is in decimal but most SAS addresses are given in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if the \fISMP_DEVICE\fR has the target's SAS address within it. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH CONFORMING TO The SMP CONFIGURE ROUTE INFORMATION function was introduced in SAS\-1 . The "Expander change count" field was added in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2006\-2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_rep_general, smp_rep_route_info(smp_utils) smp_utils-0.97/doc/smp_rep_phy_err_log.80000664000175000017500000000702211620776341017372 0ustar douggdougg.TH SMP_REP_PHY_ERR_LOG "8" "May 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_rep_phy_err_log \- invoke REPORT PHY ERROR LOG SMP function .SH SYNOPSIS .B smp_rep_phy_err_log [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-phy=ID\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] [\fI\-\-zero\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) REPORT PHY ERROR LOG function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fISAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-p\fR, \fB\-\-phy\fR=\fIID\fR phy identifier. \fIID\fR is a value between 0 and 254. Default is 0. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if the \fISMP_DEVICE\fR has the target's SAS address within it. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .TP \fB\-z\fR, \fB\-\-zero\fR zero the Allocated Response Length field in the request. This option also zeros the Request Length field in the request. This is required for strict SAS\-1.1 compliance. However this option should not be given in SAS\-2 and later; if it is given an abridged response may result. .SH NOTES Similar information is maintained for SAS SSP target phys (e.g. on a SAS disk). It can be obtained from the Protocol Specific Port log page with the sg_logs utility. .PP Similar information may be obtained for SAS initiator phys (e.g. on a SAS HBA). As an example in Linux 2.6.28 error information can be found in this directory /sys/class/sas_phy/phy-4:0 (for the phy 0 in SCSI/SAS host 4). .PP Similar information may be obtained for SATA device phys (e.g. on a SATA disk). If there is a SAT layer between OS and the SATA device then the sg_sat_phy_event utility can fetch the information. .SH CONFORMING TO The SMP REPORT PHY ERROR LOG function was introduced in SAS\-1 . The "Expander change count" field was added in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2006\-2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_phy_control(smp_utils), sg_logs(sg3_utils), .B sg_sat_phy_event(sg3_utils) smp_utils-0.97/doc/smp_utils.80000664000175000017500000003235711706323015015353 0ustar douggdougg.TH SMP_UTILS "8" "January 2012" "smp_utils\-0.97" SMP_UTILS .SH NAME smp_* \- invoke a SAS Serial Management Protocol (SMP) function .SH SYNOPSIS .B smp_* [\fI\-\-expected=EX\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Serial Attached SCSI (SAS) is a transport (also known as a interconnect) used by storage systems. A SAS system is made up of Host Bus Adapters (HBAs typically containing SCSI initiators), disks (referred to in SCSI as both targets and logical units) and optionally some switching hardware called "expanders". Expanders are not SCSI devices so a new protocol was required to control and monitor them. Its full name is the SAS Serial Management Protocol which is abbreviated to SMP. .PP smp_utils is a package of utilities. Each utility sends an SMP function request to a \fISMP_DEVICE\fR (an SMP target). Some utilities may invoke the same function more than once. If an error occurs then an error message is sent to stderr. If no error occurs, the response is decoded (the default), output in ASCII hex (when \fI\-\-hex\fR is given) or output in binary to stdout (when the \fI\-\-raw\fR option is given). .PP If \fISMP_DEVICE[,N]\fR is not given then the value in the environment variable SMP_UTILS_DEVICE is used. .PP This package was originally written for Linux and has been ported to FreeBSD and Solaris. .SH LINUX INTERFACE Currently there are multiple interfaces that allow SMP functions to be passed through to an SMP target. .PP One method is to have a \fISMP_DEVICE\fR which is actually the SMP initiator (e.g. '/dev/mptctl,0'). In this case the SMP target's SAS address must be supplied with the \fI\-\-sa=SAS_ADDR\fR option. .PP Another method is to have a \fISMP_DEVICE\fR which represents the SMP target. In this case no \fISAS_ADDRESS\fR needs to be given (since it is implicit). .PP Each utility in smp_utils attempts to work out which interface it has been given by examining the \fISMP_DEVICE\fR file. There are two interfaces supported currently: .TP \fBmpt\fR This specifies the MPT fusion SAS pass\-through. The mptsas driver uses the '/dev/mptctl' device node (character device major 10, minor 220) while the mpt2sas driver uses '/dev/mpt2ctl' device node (major 10, minor 221). The 'modprobe mptctl' or 'modprobe mpt2ctl' command may be needed. If there are multiple mpt fusion controllers (HBAs) in the computer, then the user will need to specify which one to use with the syntax: '/dev/mptctl,' where is the "ioc_num". This number can be found with dmesg after the mptsas driver is registered and appears as a suffix to the driver name (e.g. mpt2sas0). It can also be found in '/sys/class/scsi_host/host/unique_id'. When this interface is used the \fI\-\-sa=SAS_ADDR\fR option must be given to specify the SAS address of the SMP target. .TP \fBsgv4\fR (\fBsg\fR) This interface is more generic and supported by several SAS HBA drivers including mptsas (and mpt2sas). It was introduced in the linux 2.6.24 kernel. The SMP functions are passed to the kernel using a format known as "SCSI Generic Version 4" which gives this interface its name: "sgv4" or just "sg". The SAS transport layer within the SCSI sub-system unpacks the SMP requests and forwards them to SAS low level drivers that support this interface. The \fISMP_DEVICE\fR is either a member of the '/sys/class/bsg' directory (e.g. /sys/class/bsg/expander\-6:0 ) or a device node made for the bsg driver (e.g. /dev/bsg/expander\-6:0 ). Such device nodes are dynamic (i.e. they don't have fixed major and minor numbers) and should correspond to the major and minor numbers found in the 'sys/class/bsg//dev' file. .SH FREEBSD INTERFACE The CAM subsystem has been enhanced in FreeBSD 9 to pass-through SMP requests and return the corresponding responses. However CAM does not directly access expander devices because they are not SCSI devices. It makes the assumption that each SAS expander has an integrated SES (enclosure) device and that is addressed. This assumption seems to be true for SAS-2 expanders but not some SAS-1 expanders. Thus invocations look like this: .PP # smp_discover /dev/ses0 .PP where /dev/ses0 is a SES device associated with a SAS expander. .SH SOLARIS INTERFACE The USMP pass-through mechanism is used. Invocations look like this: .PP # smp_rep_manufacturer /dev/smp/expd0 .PP .SH ENVIRONMENT VARIABLES If the device name is not given then the SMP_UTILS_DEVICE environment variable is checked and if present its contents are used as the device name. .PP If the SAS address (of the SMP target) is not given and it is required (i.e. it is not implicit in the device name) then the SMP_UTILS_SAS_ADDR environment variable is checked and if present its contents are used as the SAS address. SAS addresses are usually given in hex indicated by a leading '0x' or trailing 'h'. .PP In both cases command line options override the corresponding environment variable. .SH COMMON OPTIONS Mandatory arguments to long options are mandatory for short options as well. If an option takes a numeric argument then that argument is assumed to be decimal unless otherwise indicated (e.g. with a leading "0x" or a trailing "h"). .TP \fB\-E\fR, \fB\-\-expected\fR=\fIEX\fR revision 4a of the SAS\-2 draft introduced an 'expected expander change count' field in some SMP requests. The idea is to detect other SMP initiators trying to change the state of an expander. The value \fIEX\fR is from 0 to 65535 inclusive with 0 being the default value. When \fIEX\fR is greater than zero then if the value doesn't match the expander change count of the SMP target (i.e. the expander) when the request arrives then the target ignores the request and sets a function result of "invalid expander change count" in the response. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message for the utility then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response in hexadecimal. This does not include the trailing CRC field. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. This option is usually not needed since the interface type is guessed by a utility based on the characteristics of the given \fISMP_DEVICE\fR argument or what is in the corresponding environment variables. \fIPARAMS\fR is of the form: \fIINTF[,force]\fR. If the guess doesn't work then the interface can be specified by giving a \fIINTF\fR of either 'mpt' or 'sgv4'. Sanity checks are still performed and a utility may refuse if it doesn't agree with the given \fIINTF\fR. If the user is really sure then adding a ',force' will force the utility to use the given interface. .TP \fB\-r\fR, \fB\-\-raw\fR send the response to stdout in binary. This does not include the trailing CRC field. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if the \fISMP_DEVICE\fR has the target's SAS address associated with it. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. If this option is not given then the value in the environment variable SMP_UTILS_SAS_ADDR is used. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times. .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH EXIT STATUS To aid scripts that call these utilities, the exit status is set to indicate success (0) or failure (1 or more): .TP .B 0 success .TP .B 1 \- 63 reserved for SMP function result codes. See the SAS\-2 (or later) draft, in the section on the application layer, drilling down further: management application layer then SMP functions. Here are some common function result codes: 1 [unknown SMP function], 2 [SMP function failed], 16 [phy does not exist], 17 [index does not exist], 18 [phy does not support SATA], 19 [unknown phy operation], 22 [phy vacant] and 35 [zone lock violation]. .TP .B 91 syntax error. Either illegal options, options with bad arguments or a combination of options that is not permitted. .TP .B 92 the utility is unable to open, close or use the given \fISMP_DEVICE\fR. The given file name could be incorrect or there may be file permission problems. Adding the \fI\-\-verbose\fR option may give more information. .TP .B 97 the response to an SMP function failed sanity checks. .TP .B 99 any error that can't be categorized into values 1 to 97 may yield this value. This includes transport and operating system errors. .SH NOTES Finding the SAS address of an expander can be a challenge in some environments. An enclosure containing one or more expanders may have the expander SAS address(es) printed on the back of the device, a bit like Ethernet MAC addresses. .PP In the Linux 2.6 kernel series the expander SAS address may well be in the sysfs tree but it is not always easy to find. Doing this search may help: .PP # find /sys \-name "*expander*" .PP That should show the suffix on any expanders that have been detected. Then a command like 'cat /sys/class/sas_device/expander-6:0/sas_address' should show its SAS address. .PP Another approach is to work backwards from SCSI devices (i.e. logical units). The protocol specific port log page (log page 18h) contains fields for the "attached SAS address". The sg_logs utility from the sg3_utils package could be used like this: .PP # sg_logs \-\-page=18h /dev/sdb .PP Any given "attached SAS address" is either a HBA, an expander or 0 indicating that port is not connected. An expander is indicated by "attached device type: expander device". A SAS disk's target port identifiers (also known as SAS addresses), device name and logical unit name (all NAA 5 format) can be found with the sg_vpd utility (e.g. 'sg_vpd \-i '). The sdparm utility can provide the same information (e.g. 'sdparm \-i '). .PP A SAS expander is often associated with a SCSI Enclosure Services (SES) device sometimes on the same silicon attached via a virtual phy to the expander. That SES device may be able to access and control an attached enclosure or backplane via SGPIO or I2C on sideband signals (e.g. in a SFF\-8087 cable). To interact with a SES device, see the sg_ses utility. .PP Often expander phys are grouped in fours on the same connector (e.g. SFF-8088). Care needs to be taken when multiple expanders are interconnected. An enclosure universal port is one in which the "table to table supported" attribute is set (in the REPORT GENERAL response) and the associated phys have the table routing attribute (in the DISCOVER response). Enclosure universal ports were introduced in SAS\-2 and have no restrictions when used to interconnect expanders or connect end devices. An enclosure out port is one in which the "table to table supported" attribute is clear and the associated phys have the table routing attribute. An enclosure in port is one in which the associated phys have the subtractive routing attribute. When universal ports are not available, an expander interconnect should be between an in port and an out port. .SH EXAMPLES See "Examples" section in http://sg.danny.cz/sg/smp_utils.html . .SH CONFORMING TO SAS has multiple generations. The first three generations are approved standards: the original SAS (ANSI INCITS 376-2003), SAS 1.1 (INCITS 417-2006) and SAS\-2 (ANSI INCITS 457-2010) . SAS\-2.1 technical work is ongoing and it has been split into two documents, the one of interest is called the SAS Protocol Layer (SPL) and at the time of writing the most recent draft is spl\-r07.pdf (see section 9.4.3 for SMP functions). Technical work on SAS\-3 has started with the SMP functions defined in the SPL\-2 document (spl2r03.pdf). To avoid confusion, the multiple generations of SAS will be referred to in these man pages as SAS 1, 1.1, 2, 2.1 and 3 . Drafts, including those just prior to standardization can be found at the http://www.t10.org site. INCITS policy now requires a registration to view these drafts, a break from t10.org tradition. .PP The two utilities for reading and writing to GPIO registers, smp_read_gpio and smp_write_gpio, are defined in the Small Form Factor document SFF-8485 found at http://www.sffcommittee.com . "Enhanced" versions of the corresponding SMP functions have been mentioned in some drafts but no definitions have been published and the references have been removed in more recent drafts. .PP In this section of each utility's man page is the first standard in which the associated SMP function appeared and whether there have been significant additions in later standards. .PP The COVERAGE file in the smp_utils source tarball shows a table of all SMP function names defined in the drafts, the versions of those standards in which those SMP functions first appeared and the corresponding smp_utils utility names. A lot of extra SMP functions have been added in SAS\-2 associated with zoning. .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2006\-2012 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B sg_logs, sg_vpd, sg_ses(sg3_utils); sdparm(sdparm) smp_utils-0.97/doc/smp_conf_zone_phy_info.80000664000175000017500000001075011620776341020070 0ustar douggdougg.TH SMP_CONF_ZONE_PHY_INFO "8" "May 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_conf_zone_phy_info \- invoke CONFIGURE ZONE PHY INFORMATION function .SH SYNOPSIS .B smp_conf_zone_phy_info [\fI\-\-expected=EX\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-interface=PARAMS\fR] \fI\-\-pconf=FN\fR [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-save=SAV\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) CONFIGURE ZONE PHY INFORMATION function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fI\-\-sa=SAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .PP Each zone phy configuration descriptor is 4 bytes long. The first byte is a (expander) phy identifier. The second byte has 3 modifiable bits: bit 5 is "inside ZPSDS persistent"; bit 4 is "requested inside ZPSDS"; and bit 2 is "zone group persistent". The other bits in the second byte are reserved and should be 0. The third byte is reserved and should be 0. The fourth byte is the zone group. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-E\fR, \fB\-\-expected\fR=\fIEX\fR set the 'expected expander change count' field in the SMP request. The value \fIEX\fR is from 0 to 65535 inclusive with 0 being the default value. When \fIEX\fR is greater than zero then if the value doesn't match the expander change count of the SMP target (i.e. the expander) when the request arrives then the target ignores the request and sets a function result of "invalid expander change count" in the response. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-p\fR, \fB\-\-pconf\fR=\fIFN\fR \fIFN\fR is a file containing zone phy configuration descriptors in ASCII hexadecimal; either as bytes separated by space, tab, comma or newline, or as longer strings of hexadecimal bytes in which every 2 digits represents a byte. Empty lines and those starting with "#" are ignored. Since each zone phy configuration descriptor is 4 bytes long, the number of bytes in \fIFN\fR is expected to be a multiple of 4. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. The mpt interface needs this option and it will typically be an expander's SAS address. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-S\fR, \fB\-\-save\fR=\fISAV\fR set the 'save' field in the SMP request. \fISAV\fR may take these values: 0 for updating the shadow values (default), 1 for updating the saved values, 2 for updating shadow values and if available the saved values, 3 for updating both saved and shadow values. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times. .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH NOTES The expander phys that make up a wide port (2 or more attached to phys with the same SAS address) must be set to the same zone phy configuration settings (other than the phy id). .PP Zone phy information can be read back from an expander and placed in a file with the smp_discover_list utility's \fI\-\-zpi=FN\fR option. The format of that file should be suitable for this utility's \fI\-\-pconf=FN\fR option. .SH CONFORMING TO The SMP CONFIGURE ZONE PHY INFORMATION function was introduced in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_conf_zone_perm_tbl, smp_zone_activate, .B smp_discover_list(smp_utils) smp_utils-0.97/doc/smp_conf_zone_perm_tbl.80000664000175000017500000001660511637072531020064 0ustar douggdougg.TH SMP_CONF_ZONE_PERM_TBL "8" "September 2011" "smp_utils\-0.97" SMP_UTILS .SH NAME smp_conf_zone_perm_tbl \- invoke CONFIGURE ZONE PERMISSION TABLE function .SH SYNOPSIS .B smp_conf_zone_perm_tbl [\fI\-\-deduce\fR] [\fI\-\-expected=EX\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-numzg=NG\fR] \fI\-\-permf=FN\fR [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-save=SAV\fR] [\fI\-\-start=SS\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends one or more SAS Serial Management Protocol (SMP) CONFIGURE ZONE PERMISSION TABLE function requests to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fI\-\-sa=SAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify an HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .PP The zone permission table has a row for each source zone group and a column for each destination zone group. Each element in the table (ZP[s,d]) is a single bit indicating whether the source zone group can access the destination zone group (the bit is set: 1) or not (the bit is clear: 0). There are two different table sizes: 128 and 256 zone groups. Descriptors provided to this function request are either 16 bytes (128 bits) or 32 bytes (256 bits) long. Each descriptor is basically a row in the zone permission table. Apart from being row in the zone permission table each descriptor is transposed and applied to the corresponding destination column. This "maintains symmetry about the ZP[s,s] table axis" in the words of the draft. Also descriptors are applied in the order that they appear in the request (i.e. ascending source zone group numbers). .PP The maximum number of descriptors that one CONFIGURE ZONE PERMISSION TABLE function request can hold is limited to 63 if there are 128 zone groups; and is limited to 31 if there are 256 zone groups. A full zone table will contain 128 (or 256) descriptors so to configure a full table requires multiple CONFIGURE ZONE PERMISSION TABLE requests. .PP The number of zone permission configuration descriptors is determined by reading the \fIFN\fR file associated with the \fI\-\-permf=FN\fR option. If there are more descriptors than can fit in one CONFIGURE ZONE PERMISSION TABLE function request then multiple requests are sent. All descriptors found in the \fIFN\fR file will be sent unless an earlier function response indicates there has been an error. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-d\fR, \fB\-\-deduce\fR deduce number of zone groups from number of bytes on active \fIFN\fR lines. With 128 zone groups each active line will contain 16 (or less) bytes. With this option if any active line in \fIFN\fR contains more than 16 bytes then 256 zone groups are assumed, otherwise 128 zone groups are assumed. This option cannot be given with the \fI\-\-numzg=NG\fR option (as they may contradict one another). .TP \fB\-E\fR, \fB\-\-expected\fR=\fIEX\fR set the 'expected expander change count' field in the SMP request. The value \fIEX\fR is from 0 to 65535 inclusive with 0 being the default value. When \fIEX\fR is greater than zero then if the value doesn't match the expander change count of the SMP target (i.e. the expander) when the request arrives then the target ignores the request and sets a function result of "invalid expander change count" in the response. .TP \fB\-f\fR, \fB\-\-start\fR=\fISS\fR starting (first) source zone group (default: zone group 0). If multiple function requests are sent, this field in subsequent function requests will be adjusted to reflect those descriptors already sent. Note that the \fISS\fR value may be picked up from \fIFN\fR and if this option and that value are not the same, an error is generated. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-n\fR, \fB\-\-numzg\fR=\fIZG\fR number of zone groups. \fIZG\fR can be 0 (default) or 1. 0 implies 128 zone groups while 1 implies 256 zone groups. This option cannot be used with the \fI\-\-deduce\fR option. .TP \fB\-P\fR, \fB\-\-permf\fR=\fIFN\fR FN is a file containing zone permission configuration descriptors in ASCII hexadecimal; either as bytes separated by space, tab, comma or newline, or as longer strings of hexadecimal bytes in which every 2 digits represents a byte. Empty lines and those starting with "#" are ignored. A line with "\-\-start=" will be taken as the starting source zone group number (i.e. becomes \fISS\fR) unless it contradicts the command line \fI\-\-start=SS\fR option. Otherwise lines starting with "\-" are ignored. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. The mpt interface needs this option and it will typically be an expander's SAS address. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-S\fR, \fB\-\-save\fR=\fISAV\fR set the 'save' field in the SMP request. \fISAV\fR may take these values: 0 for updating the shadow values (default), 1 for updating the saved values, 2 for updating shadow values and if available the saved values, 3 for updating both saved and shadow values. .TP \fB\-f\fR, \fB\-\-start\fR=\fISS\fR See entry above, listed in order by its short option letter (i.e. \fI\-f\fR). .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times. .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH NOTES For simplicity, each active line in the \fIFN\fR file should contain 16 or 32 bytes. 16 bytes if there are 128 zone groups or 32 bytes if there are 256 zone groups. .PP SCSI is big endian. So for 128 zone groups, the first byte placed in the zone permission configuration descriptor is ZP[0,127\-120]. If the \fI\-\-start=SS\fR option is given then the first byte is ZP[\fISS\fR,127\-120]. For 256 zone groups, the first bytes are ZP[0,255\-248] and ZP[\fISS\fR,255\-248] respectively. .PP There is an annex called "Zone permission configuration descriptor examples" in recent SAS\-2 and later drafts (Annex H in spl2r03.pdf). .PP There are some examples of the \fI\-\-permf=FN\fR format in the examples directory. Not all SAS-2 expanders properly implement descriptor transpose and only place the descriptor in the row corresponding to the source zone group. .SH CONFORMING TO The SMP CONFIGURE ZONE PERMISSION TABLE function was introduced in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_conf_zone_phy_info, smp_zone_activate(smp_utils) smp_utils-0.97/doc/smp_rep_manufacturer.80000664000175000017500000000537311620776341017564 0ustar douggdougg.TH SMP_REP_MANUFACTURER "8" "May 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_rep_manufacturer \- invoke REPORT MANUFACTURER INFORMATION SMP function .SH SYNOPSIS .B smp_rep_manufacturer [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] [\fI\-\-zero\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) REPORT MANUFACTURER INFORMATION function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fISAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if the \fISMP_DEVICE\fR has the target's SAS address within it. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .TP \fB\-z\fR, \fB\-\-zero\fR zero the Allocated Response Length field in the request. This is required for strict SAS\-1.1 compliance. However this option should not be given in SAS\-2 and later; if it is given an abridged response may result. .SH CONFORMING TO The SMP REPORT MANUFACTURER function was introduced in SAS\-1, with small additions in SAS\-1.1 . This function remains unaltered in SAS\-2 and SPL\-1. .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2006\-2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_discover(smp_utils) smp_utils-0.97/doc/bsg_sas_smp.txt0000664000175000017500000002354111620776341016310 0ustar douggdougg SAS SMP PASS-THROUGH VIA BSG ---------------------------- Introduction ============ Serial Attached SCSI (SAS) has a Serial Management Protocol (SMP) which is mainly used to communicate with SAS expanders. SAS expanders typically have between 12 and 36 phys and permit many disks (e.g. more than 8) to be connected to a SAS HBA or RAID controller. In SAS interconnects that include one or more expanders, the kernel uses SMP to discover SAS and SATA devices during boot up. The kernel also responds to a BROADCAST(Change) received from an expander which indicates some change in the disposition of connected SAS and SATA devices. SAS expanders are powerful devices and user space programs may be required to access and manage them. New features such as phy-based zoning were added in SAS-2 and this increases the need for user space programs to access expanders. The SAS-2 standard outlines two ways to control expanders: a) via SMP from an SMP initiator which is found in most SAS HBAs and and RAID controllers b) an Out of Band communication method which SAS-2 does not define but nominates ethernet as an example This document outlines using method a) via the "block SCSI pass-through" (bsg) driver to access SAS expanders. The bsg driver ============== bsg is an acronym for Block SCSI Generic. The "block" used in the name of this driver is a little confusing since each bsg device node (e.g. /dev/bsg/0:0:0:0 corresponds to /dev/sda which is a SATA disk on this laptop) is actually a "char" device. The "block" term refers to the kernel layer which conveys both blocked data and messages to lower layers (such as the SCSI layer). bsg driver device nodes that can be used for SMP pass-through have names like /dev/bsg/expander-6:0 and /dev/bsg/sas_host6 . "expander-6:0" can be interpreted as the first expander (origin 0) found by (SAS) host number 6. There might be another SAS HBA in the machine (e.g. host 7) also connected to the same expander and that might lead to another bsg device node like /dev/bsg/expander-7:0 . There is also related information in sysfs. For example, /sys/class/bsg/expander-6:0/dev might contain a string like "254:2". Those are the major and minor device numbers of the corresponding bsg device node: # ls -l /dev/bsg/expander-6:0 crw------- 1 root root 254, 2 Jul 29 13:11 /dev/bsg/expander-6:0 Also the SAS address of the expander can be found with: # cat /sys/class/sas_device/expander-6:0/sas_address 0x5001517e85c3efff SMP Frames ========== SMP is a simple protocol, much simpler than the Serial SCSI protocol (SSP) and the Serial ATA Tunneled Protocol (STP) which are also defined in the SAS standards. That simplicity translates to more work for the user space programs using an SMP pass-through and a somewhat delicate division of work between the user space and the SAS HBA driver. SMP functions are sent to an SMP target (e.g. an expander) in an SMP request frame and the response is returned in an SMP response frame. Both request and response frames have a maximum size of 1028 bytes. Both request and response frames include a 4-byte header at the start of the frame and a 4-byte CRC at the end of the frame. The contents of an SMP REQUEST frame header (counting origin 0) are: - [byte 0]: SMP Frame type: 0x40 - [byte 1]: SMP function: 0x0 to 0xbf (see SAS); 0xc0 to 0xff vendor specific - [byte 2] [SAS-2]: allocated response length: expected response length in dwords (4-byte unit) excluding header and CRC - [byte 3] [SAS-2]: request length in dwords excluding this header and the CRC In SAS-1 (and SAS-1.1) bytes 2 and 3 are "reserved" which means they should be set to zero but are typically ignored by an SMP target. In this case the request and response lengths are implicit depending on the given SMP function (byte 1). The contents of an SMP RESPONSE frame header are: - [byte 0]: SMP Frame type: 0x41 - [byte 1]: SMP function: echoes byte 1 in the request. - [byte 2]: function result: 0x0 for success - [byte 3] [SAS-2]: response length in dwords excluding this header and the CRC In SAS-1 (and SAS-1.1) byte 3 is "reserved" which means it is typically set to zero by an SMP target. The response length is implicit depending on the associated SMP function (byte 1). Note that the largest request and response length is 255 (i.e. 0xff) which equates to 1020 bytes and when the 4-byte header and CRC are added, the maximum request and response frames are both 1028 bytes long. A user space program using the bsg SMP pass-through is responsible for setting up the request header and checking the returned response header. Existing bsg pass-through implementations generate and check the CRC in the HBA driver. This frees the user space program from that responsibility but leaves open the question of whether user space programs should pass through space for the CRC and what should be placed in that field. Current usage is to pass through the full frame (i.e. including the CRC) and place zero bytes in that field. The response frame allocation should also allow for the full frame (i.e. including the CRC) to be returned. Pass-through ============ Depending on the distribution the header file for the bsg driver might be found at one of these locations: /usr/include/linux/bsg.h /lib/modules//include/linux/bsg.h The first is preferred but requires a recent glibc version. The second one is in the kernel source and leads to a "don't use kernel source" warning during the C compilation that can safely be ignored. The general procedure is to open a bsg device node, use the resulting file descriptor to invoke an SG_IO ioctl and then close the file descriptor. The SG_IO ioctl sends the SMP request frame and then waits for the corresponding SMP response. The bsg device node should be opened O_RDWR with the open(2) system call. This will require root permissions (perhaps CAP_IO_RAW is sufficient). An instance of the sg_io_v4 structure needs to be built then a pointer to that instance passed as the SG_IO ioctl's third argument. Here is a small code fragment without error checking: int fd; struct sg_io_v4 req_resp; memset(&req_resp, 0, sizeof(req_resp); fd = open("/dev/nsg/expander-6:0", O_RDWR); // place data in the fields of a_req_resp ioctl(fd, SG_IO, &req_resp); // check and process the response close(fd); The sg_io_v4 structure was designed for SCSI commands but is general enough to be used with many protocols. SCSI has two types of transfers going from an HBA to a disk: SCSI commands (requests) and optionally data associated with commands like WRITE, so-called data_out. In return the SCSI initiator might get a single byte status, a sense buffer (response) and data associated with commands like READ, so-called "data_in". SMP only needs request and response frames and these are mapped to the sg_io_v4 structure's data_out and data_in buffers, respectively. Here is a code fragment to send an SMP REPORT MANUFACTURER INFORMATION function request and allow for its response: unsigned char req[] = {0x40, 0x1, 0xE, 0x0, 0, 0, 0, 0}; unsigned char resp[(0xE * 4) + 8]; /* 64 bytes */ /* Note allow for CRC in request and response */ unsigned char cmd[16]; /* unused fields have been zeroed (e.g. by a memset() shown above) */ req_resp.guard = 'Q'; req_resp.protocol = BSG_PROTOCOL_SCSI; req_resp.subprotocol = BSG_SUB_PROTOCOL_SCSI_TRANSPORT; req_resp.request_len = sizeof(cmd); /* unused */ req_resp.request = (uintptr_t) cmd; req_resp.dout_xfer_len = sizeof(req); req_resp.dout_xferp = (uintptr_t) req; req_resp.din_xfer_len = sizeof(resp); /* 64 */ req_resp.din_xferp = (uintptr_t) resp; hdr.timeout = 20000; /* i.e. 20 seconds in millisecond units */ In SAS-2 the SMP REPORT MANUFACTURER INFORMATION response is 64 bytes long including header and CRC. Processing the response starts by checking the value returned by the ioctl() system call. If that is -1 then the operation has failed and errno should be checked. If the ioctl succeeded then the following fields in the sg_io_v4 structure instance should be checked: driver_status, transport_status and device_status. If they are all zero then the number of valid bytes in the buffer pointed to by din_xferp should be (din_xfer_len - din_resid). In SAS-2 the first 4 bytes of the response should be: 0x41, 0x1, 0x0, 0xe . If the third byte is other than 0x0 then SMP function result is indicating an error. If the HBA passes back the CRC field in the response then din_resid will most likely be 0; if the HBA does not pass back the CRC field then din_resid will most likely be 4; either is okay. How the HBA reports errors such as a missing expander (e.g. cable unexpectedly removed), transport congestion (e.g. in SSP this can lead to aborted commands) and timeouts has not been agreed. Example code ============ The author has written a package of command line utilities called smp_utils (or smp-utils using Debian conventions). The source can be found in the Download section of this page: http://sg.danny.cz/sg/smp_utils.html The bsg SMP pass-through specific code is in the sgv4 directory. To allow the utilities to use other pass-throughs (e.g. proprietary Linux and other OSes such as FreeBSD's CAM extensions) an abstraction layer sits between each utility and the bsg SMP pass-through. The abstraction layer is defined in smp_utils include/smp_utils.h header (see struct smp_req_resp). Non-expander use of SMP ======================= In the section on "The bsg driver" above, /dev/bsg/sas_host6 was given as an example of a bsg SMP device node. That is a SAS HBA itself rather than an expander. The reason is that miniSAS 8087 cables carry sideband signals using the SGPIO protocol which is somewhat like I2C. These sideband signals may be controlled by the SMP READ GPIO and WRITE GPIO functions. Douglas Gilbert 20110802 smp_utils-0.97/doc/smp_rep_phy_event_list.80000664000175000017500000001145711675012613020117 0ustar douggdougg.TH SMP_REP_PHY_EVENT_LIST "8" "December 2011" "smp_utils\-0.97" SMP_UTILS .SH NAME smp_rep_phy_event_list \- invoke REPORT PHY EVENT LIST SMP function .SH SYNOPSIS .B smp_rep_phy_event_list [\fI\-\-desc\fR] [\fI\-\-enumerate\fR] [\fI\-\-force\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-index=IN\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-long\fR] [\fI\-\-nonz\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] [\fI\-\-zero\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) REPORT PHY EVENT LIST function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fISAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .PP Reports zero or more phy event list descriptors. Each descriptor contains a phy identifier, a phy event source, a phy event (i.e. a count) and a peak value detector theshold. At least one phy event should be maintained for each phy. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-d\fR, \fB\-\-desc\fR precede each phy event descriptor with a line announcing its descriptor index number. Index numbers start at 1. .TP \fB\-e\fR, \fB\-\-enumerate\fR enumerate all of the known Phy Event Source names, one per line preceded by its value in hex. Ignores \fISMP_DEVICE\fR if it is given; most other options are also ignored. Exits after displaying the names. .TP \fB\-f\fR, \fB\-\-force\fR force the report to continue after the last descriptor index has been exceeded. The default action is too stop the report when the last descriptor index has been exceeded. at 1. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-i\fR, \fB\-\-index\fR=\fIIN\fR starting phy event list descriptor index. \fIIN\fR is a value between 0 and 65535. The default is 1. If \fIIN\fR is 0 then the response should contain no phy event list descriptors but the 'last phy event list descriptor index' and 'phy event list descriptor length' fields in the response should be set appropriately. The last point was clarified in SPL\-2 revision 3. .TP \fB\-l\fR, \fB\-\-long\fR prefix each phy event source string with its numeric identifier in hex. Also place "phy_id=" in front of the phy identifier number. For example: "phy_id=3: [0x1]: Invalid word count: 29"; without this option this line would be: "3: Invalid word count: 29". .TP \fB\-n\fR, \fB\-\-nonz\fR only show phy events with non-zero counts or peak values. The default is to show all phy events in the response. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if the \fISMP_DEVICE\fR has the target's SAS address within it. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH NOTES Similar information is maintained for SAS SSP target phys (e.g. on a SAS disk). It can be obtained from the Protocol Specific Port log page with the sg_logs utility. .PP Similar information may be obtained for SAS initiator phys (e.g. on a SAS HBA). As an example in Linux 2.6.28 error information can be found in this directory /sys/class/sas_phy/phy-4:0 (for the phy 0 in SCSI/SAS host 4). .PP Similar information may be obtained for SATA device phys (e.g. on a SATA disk). If there is a SAT layer between OS and the SATA device then the sg_sat_phy_event utility can fetch the information. .SH CONFORMING TO The SMP REPORT PHY EVENT LIST function was introduced in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_phy_control, smp_rep_phy_event(smp_utils) .B sg_logs, sg_sat_phy_event(sg3_utils) smp_utils-0.97/doc/smp_rep_general.80000664000175000017500000000644111620776341016502 0ustar douggdougg.TH SMP_REP_GENERAL "8" "May 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_rep_general \- invoke REPORT GENERAL SMP function .SH SYNOPSIS .B smp_rep_general [\fI\-\-brief\fR] [\fI\-\-changecount\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] [\fI\-\-zero\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) REPORT GENERAL function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fISAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-b\fR, \fB\-\-brief\fR reports (prints to stdout) only a few important fields from the response. .TP \fB\-c\fR, \fB\-\-changecount\fR reports (prints to stdout) the value of the expander change count field from the response. The value is printed in decimal and is in the range 0 to 65535. Only expanders compliant with SAS\-1.1 (and earlier) should yield 0. [Expanders compliant with SAS\-2 (and later) should set the "long response" bit in the REPORT GENERAL response to 1.] .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if the \fISMP_DEVICE\fR has the target's SAS address within it. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .TP \fB\-z\fR, \fB\-\-zero\fR zero the Allocated Response Length field in the request. This is required for strict SAS\-1.1 compliance. However this option should not be given in SAS\-2 and later; if it is given an abridged response may result. .SH EXAMPLES See "Examples" section in http://sg.danny.cz/sg/smp_utils.html .SH CONFORMING TO The SMP REPORT GENERAL function was introduced in SAS\-1, with small additions in SAS\-1.1 . There have been a large number of additions in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2006\-2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_discover(smp_utils) smp_utils-0.97/doc/smp_phy_control.80000664000175000017500000001556711620776341016570 0ustar douggdougg.TH SMP_PHY_CONTROL "8" "May 2011" "smp_utils\-0.96" SMP_UTILS .SH NAME smp_phy_control \- invoke PHY CONTROL SMP function .SH SYNOPSIS .B smp_phy_control [\fI\-\-attached=ADN\fR] [\fI\-\-expected=EX\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-max=MA\fR] [\fI\-\-min=MI\fR] [\fI\-\-op=OP\fR] [\fI\-\-phy=ID\fR] [\fI\-\-pptv=TI\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-sas_pa=CO\fR] [\fI\-\-sas_sl=CO\fR] [\fI\-\-sata_pa=CO\fR] [\fI\-\-sata_sl=CO\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends a SAS Serial Management Protocol (SMP) PHY CONTROL function request to an SMP target. The SMP target is identified by the \fISMP_DEVICE\fR and the \fISAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .PP The PHY CONTROL function is used to change the state of a phy within an SMP target. SMP targets are typically SAS expanders which have multiple phys. Certain operation values (e.g. 'lr' (link reset) and 'hr' (hard reset)) change the state of the attached phy. Sending such operation values to the phy in the SMP target that is attached to the originator (i.e. the SMP initiator) may lead to a bad response. .PP Invoking this utility with no arguments (other than \fISMP_DEVICE\fR which might be in an environment variable and \fI\-\-sa=SAS_ADDR\fR which might be in an environment variable or not needed) is harmless. In other words a phy's state is only changed when either \fI\-\-max=MA\fR, \fI\-\-min=MI\fR, \fI\-\-op=OP\fR or \fI\-\-pptv=TI\fR is given with a non default value. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-a\fR, \fB\-\-attached\fR=\fIADN\fR specifies the attached device name (\fIADN\fR). The default value is 0 . The \fIADN\fR is in decimal but is likely to be a SAS address which is typically shown in hexadecimal. To specify a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. This option is ignored by the expander unless the '\-\-op=sadn' option is also given. .TP \fB\-E\fR, \fB\-\-expected\fR=\fIEX\fR set the 'expected expander change count' field in the SMP request. The value \fIEX\fR is from 0 to 65535 inclusive with 0 being the default value. When \fIEX\fR is greater than zero then if the value doesn't match the expander change count of the SMP target (i.e. the expander) when the request arrives then the target ignores the request and sets a function result of "invalid expander change count" in the response. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-M\fR, \fB\-\-max\fR=\fIMA\fR permits the programmed maximum physical link rate to be changed on the gven phy. Permitted values are: 0 \-> no change, 8 \-> 1.5 Gbps, 9 \-> 3 Gbps, 10 \-> 6 Gbps or 11 \-> 12 Gbps. Default value is 0. .TP \fB\-m\fR, \fB\-\-min\fR=\fIMI\fR permits the programmed minimum physical link rate to be changed on the given phy. Permitted values are: 0 \-> no change, 8 \-> 1.5 Gbps, 9 \-> 3 Gbps, 10 \-> 6 Gbps or 11 \-> 12 Gbps. Default value is 0. .TP \fB\-o\fR, \fB\-\-op\fR=\fIOP\fR specifies the operation to be performed on the given phy. The \fIOP\fR argument can be either numeric or a string. If a number is given, it is put into the 'phy operation' field of the request. Allowable strings are abbreviations of which only the first two characters need to match. The supported strings (with corresponding value in square brackets) are: 'nop' [0] (no operation), 'lr' [1] (link reset), 'hr' [2] (hard reset), 'dis' [3] (disable phy), 'cel' [5] (clear error log), 'ca' [6] (clear affiliation), 'tspss' [7] (transmit SATA port selection signal), 'citnl' [8] (clear STP I_T nexus loss (bit)), and 'sadn' [9] (set attached device name). The default value is 0 (no operation). .TP \fB\-p\fR, \fB\-\-phy\fR=\fIID\fR phy identifier. \fIID\fR is a value between 0 and 154. Default is 0. .TP \fB\-P\fR, \fB\-\-pptv\fR=\fITI\fR partial pathway timeout value. The units are microseconds and the permitted values are between 0 and 15 inclusive. 7 microseconds is recommended by sas2r07. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if the \fISMP_DEVICE\fR has the target's SAS address within it. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-q\fR, \fB\-\-sas_pa\fR=\fICO\fR set the Enable SAS Partial field to \fICO\fR which is two bits wide. The defined values for \fICO\fR are 0 for no change; 1 for manage partial phy power conditions; 2 for disable partial phy power conditions. .TP \fB\-l\fR, \fB\-\-sas_sl\fR=\fICO\fR set the Enable SAS Slumber field to \fICO\fR which is two bits wide. The defined values for \fICO\fR are 0 for no change; 1 for manage slumber phy power conditions; 2 for disable slumber phy power conditions. .TP \fB\-Q\fR, \fB\-\-sata_pa\fR=\fICO\fR set the Enable SATA Partial field to \fICO\fR which is two bits wide. The defined values for \fICO\fR are 0 for no change; 1 for manage partial phy power conditions; 2 for disable partial phy power conditions. .TP \fB\-L\fR, \fB\-\-sata_sl\fR=\fICO\fR set the Enable SATA Slumber field to \fICO\fR which is two bits wide. The defined values for \fICO\fR are 0 for no change; 1 for manage slumber phy power conditions; 2 for disable slumber phy power conditions. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .SH NOTES Once an expander phy has been disabled with \fI\-\-op=dis\fR then it can be later re-enabled with a link reset or hard reset (e.g. \fI\-\-op=lr\fR). .SH EXAMPLES See "Examples" section in http://sg.danny.cz/sg/smp_utils.html .SH CONFORMING TO The SMP PHY CONTROL function was introduced in SAS\-1 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2006\-2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_discover(smp_utils) smp_utils-0.97/doc/smp_discover_list.80000664000175000017500000002350111675012613017057 0ustar douggdougg.TH SMP_DISCOVER_LIST "8" "December 2011" "smp_utils\-0.97" SMP_UTILS .SH NAME smp_discover_list \- invoke DISCOVER LIST SMP function .SH SYNOPSIS .B smp_discover_list [\fI\-\-adn\fR] [\fI\-\-brief\fR] [\fI\-\-descriptor=TY\fR] [\fI\-\-filter=FI\fR] [\fI\-\-help\fR] [\fI\-\-hex\fR] [\fI\-\-ignore\fR] [\fI\-\-interface=PARAMS\fR] [\fI\-\-num=NUM\fR] [\fI\-\-one\fR] [\fI\-\-phy=ID\fR] [\fI\-\-raw\fR] [\fI\-\-sa=SAS_ADDR\fR] [\fI\-\-summary\fR] [\fI\-\-verbose\fR] [\fI\-\-version\fR] [\fI\-\-zpi=FN\fR] \fISMP_DEVICE[,N]\fR .SH DESCRIPTION .\" Add any additional description here .PP Sends one or more SAS Serial Management Protocol (SMP) DISCOVER LIST function requests to an SMP target and decodes or outputs the responses. The SMP target is identified by the \fISMP_DEVICE\fR and the \fISAS_ADDR\fR. Depending on the interface, the \fISAS_ADDR\fR may be deduced from the \fISMP_DEVICE\fR. The mpt interface uses \fISMP_DEVICE\fR to identify a HBA (an SMP initiator) and needs the additional \fI,N\fR to differentiate between HBAs if there are multiple present. .PP If the \fI\-\-phy=ID\fR option is not given then \fI\-\-summary\fR is assumed. When \fI\-\-summary\fR is given or assumed, this utility shows the disposition of each active expander phy in table form. One row is shown for each phy and is described in the SINGLE LINE PER PHY FORMAT section below. For this purpose disabled and errored expander phys are considered "active" and can be suppressed from the output by adding the \fI\-\-brief\fR option. .PP The DISCOVER LIST response may contain up to 8 descriptors when the "descriptor type" field in the request is set to 0 (e.g. \fI\-\-descriptor=0\fR). The DISCOVER LIST response may contain up to 40 descriptors when the "descriptor type" field in the request is set to 1 (e.g. \fI\-\-descriptor=1\fR). Multiple DISCOVER LIST requests will be made if more descriptors are requested (e.g. \fI\-\-summary\fR requests 254) and the previous response indicates that more descriptors may be available. .SH OPTIONS Mandatory arguments to long options are mandatory for short options as well. .TP \fB\-A\fR, \fB\-\-adn\fR causes the "attached device name" field to be output when the \fI\-\-one\fR or \fI\-\-summary\fR option is also given. See the section below on SINGLE LINE PER PHY FORMAT. Note the "attached device name" field is not available in the short format (e.g. \fI\-\-descriptor=1\fR). .TP \fB\-b\fR, \fB\-\-brief\fR reduce the decoded response output. .TP \fB\-d\fR, \fB\-\-descriptor\fR=\fITY\fR set the "descriptor type" field in the request. When \fITY\fR is 0 then the 120 byte response defined by the DISCOVER function response (less its CRC field) is placed in the descriptors of this function's response. When \fITY\fR is 1 the short format (i.e. 24 byte per descriptor) information is placed in the descriptors of this function's response. .TP \fB\-f\fR, \fB\-\-filter\fR=\fIFI\fR set the filter field in the request. When \fIFI\fR is 0 (default) fetch descriptors for all phys. When \fIFI\fR is 1 only fetch descriptors for phys attached to (other) expanders. When \fIFI\fR is 2 only fetch descriptors for phys attached to expanders or end devices. When \fIFI\fR is 1 or 2, expander phys that would yield "phy vacant" (indicating they are hidden by zoning) are filtered out. .TP \fB\-h\fR, \fB\-\-help\fR output the usage message then exit. .TP \fB\-H\fR, \fB\-\-hex\fR output the response (less the CRC field) in hexadecimal. .TP \fB\-i\fR, \fB\-\-ignore\fR sets the Ignore Zone Group bit in the SMP Discover list request. .TP \fB\-I\fR, \fB\-\-interface\fR=\fIPARAMS\fR interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. .TP \fB\-n\fR, \fB\-\-num\fR=\fINUM\fR maximum number of descriptors fetch. If any descriptors are in the response the first phy id will be greater than or equal to the argument of \fI\-\-phy=ID\fR. Note that maximum SMP frame size is 1032 bytes (including a trailing 4 byte CRC) which may limit the number of descriptors that can be fetched by a single DISCOVER LIST function (especially when '\-\-descriptor=0'). .TP \fB\-o\fR, \fB\-\-one\fR use one line (summarized) format for each descriptor in the response. The default action when this option is not given is to output multiple indented lines for each descriptor in the response. See the section below on SINGLE LINE PER PHY FORMAT. .TP \fB\-p\fR, \fB\-\-phy\fR=\fIID\fR phy identifier. \fIID\fR is a value between 0 and 254. This is the starting (lowest numbered) phy id to fetch in the response. Note that due to the filter field setting, the first phy id in the response may be greater than the argument to this option. .TP \fB\-r\fR, \fB\-\-raw\fR send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr. .TP \fB\-s\fR, \fB\-\-sa\fR=\fISAS_ADDR\fR specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if the \fISMP_DEVICE\fR has the target's SAS address within it. The \fISAS_ADDR\fR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. .TP \fB\-S\fR, \fB\-\-summary\fR output a multi line summary, with one line per active phy. Checks up to 254 phys starting at phy identifier \fIID\fR (which defaults to 0). Equivalent to '\-o \-d 1 \-n 254 \-b' unless the \fI\-\-adn\fR option was also given, in which case it is equivalent to '\-o \-d 0 \-n 254 \-b' . See the section below on SINGLE LINE PER PHY FORMAT. .TP \fB\-v\fR, \fB\-\-verbose\fR increase the verbosity of the output. Can be used multiple times. .TP \fB\-V\fR, \fB\-\-version\fR print the version string and then exit. .TP \fB\-Z\fR, \fB\-\-zpi\fR=\fIFN\fR \fIFN\fR is a file that will be created or truncated then have zone phy information written to it in a format suitable for input to the smp_conf_zone_phy_info utility's \fI\-\-pconf=FN\fR option. If \fI\-\-num=NUM\fR is not given it is set to 254. The output will start from phy_id 0 unless \fI\-\-phy=ID\fR is given. .SH SINGLE LINE PER PHY FORMAT The \fI\-\-summary\fR (or \fI\-\-one\fR) option causes SMP DISCOVER LIST descriptors to be compressed to one line per phy. To save space SAS addresses are shown in hex without a '0x' prefix or 'h' suffix. The header section outputs information found in the DISCOVER LIST response's header section. .PP For each descriptor in the DISCOVER LIST response, one line is output starting with " phy :" where is the phy identifier (and they are origin zero). That is followed by the routing attribute represented by a single letter which is either "D" for direct routing, "S" to subtractive routing or "T" for table routing. Then comes the negotiated physical link rate which is either "disabled", "reset problem" or "spinup hold". Other states are mapped to "attached". This includes enabled phys with nothing connected which appear as "attached:[0000000000000000:00]". .PP Information shown between the brackets is for the attached device. Phys that are connected display something like: "attached:[5000c50000520a2a:01 " where the first number is the attached SAS address (in hex) and the second number is the attached device's phy identifier. If the attached device type is other than an end device then one of these abbreviations is output: "exp" (for expander), "fex" (for fanout expander) or "res" (for unknown attached device type). If a phy is flagged as "virtual" then the letter "V" appears next. Next are the protocols supported by the attached device which are shown as "i()" for initiator protocols and/or "t()" for target protocols. The is made up of "PORT_SEL", "SSP", "STP", "SMP" and "SATA" with "+" used as a separator. For example a SAS host adapter wi11 most likely appear as: "i(SSP+STP+SMP)". This completes the information about the attached phy, hence the closing right bracket. .PP If appropriate, the negotiated physical link rate is shown in gigabits per second. Here is an example of a line for expander phy identifier 11 connected to a SATA target (or SATA "device" to use the t13.org term): .PP phy 11:T:attached:[500605b000000afb:00 t(SATA)] 1.5 Gbps .PP If the expander supports zoning (i.e. REPORT GENERAL response bit for 'zoning supported' is set) and a phy's zone group is other than zg 1 then the phy's zone group is shown (e.g. "ZG:2"). .PP If the \fI\-\-adn\fR option is given then after the attached SAS address and the attached device's phy identifier are output an extra field is inserted containing the "attached device name" field. For a SAS disk this should be its target device name (in NAA-5 format) and for a SATA disk its WWN (if provided, also in NAA-5 format). Also when the \fI\-\-adn\fR option is given the phy speed and zone group are not output in order to keep the line length reasonable. .SH NOTES In SAS\-2 and later both the DISCOVER and DISCOVER LIST functions are available. The DISCOVER LIST function should be favoured for several reasons: its response can hold up to 40 descriptors each describing the state of one expander phy. The vast majority of expander chips on the market support 36 phys or less so one DISCOVER LIST response will summarize the states of all its phys. With the DISCOVER function only one expander phy's state is returned in its response. Other advantages of the DISCOVER LIST function are its "phy filter" and "descriptor type" function request fields. .SH CONFORMING TO The SMP DISCOVER LIST function was introduced in SAS\-2 . .SH AUTHORS Written by Douglas Gilbert. .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2006\-2011 Douglas Gilbert .br This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH "SEE ALSO" .B smp_utils, smp_discover, smp_phy_control, smp_conf_zone_phy_info smp_utils-0.97/configure0000775000175000017500000144015311665236170014414 0ustar douggdougg#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.68 for smp_utils 0.97. # # Report bugs to . # # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, # 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software # Foundation, Inc. # # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : else exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO PATH=/empty FPATH=/empty; export PATH FPATH test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1 test \$(( 1 + 1 )) = 2 || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir/$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : CONFIG_SHELL=$as_shell as_have_required=yes if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : break 2 fi fi done;; esac as_found=false done $as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : CONFIG_SHELL=$SHELL as_have_required=yes fi; } IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV export CONFIG_SHELL case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"} fi if test x$as_have_required = xno; then : $as_echo "$0: This script requires a shell more modern than all" $as_echo "$0: the shells that I found on your system." if test x${ZSH_VERSION+set} = xset ; then $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" $as_echo "$0: be upgraded to zsh 4.3.4 or later." else $as_echo "$0: Please tell bug-autoconf@gnu.org and $0: dgilbert@interlog.com about your system, including any $0: error possibly output before this message. Then install $0: a modern shell, or manually run the script under such a $0: shell if you do have one." fi exit 1 fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in #( -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" SHELL=${CONFIG_SHELL-/bin/sh} test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME='smp_utils' PACKAGE_TARNAME='smp_utils' PACKAGE_VERSION='0.97' PACKAGE_STRING='smp_utils 0.97' PACKAGE_BUGREPORT='dgilbert@interlog.com' PACKAGE_URL='' # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS LIBOBJS HAVE_SMPUTILS_FALSE HAVE_SMPUTILS_TRUE SMPUTILS_LIBS OS_SOLARIS_FALSE OS_SOLARIS_TRUE OS_LINUX_FALSE OS_LINUX_TRUE OS_FREEBSD_FALSE OS_FREEBSD_TRUE os_libs os_deps CPP OTOOL64 OTOOL LIPO NMEDIT DSYMUTIL MANIFEST_TOOL RANLIB ac_ct_AR AR DLLTOOL OBJDUMP LN_S NM ac_ct_DUMPBIN DUMPBIN LD FGREP EGREP GREP SED host_os host_vendor host_cpu host build_os build_vendor build_cpu build LIBTOOL am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE am__quote am__include DEPDIR OBJEXT EXEEXT ac_ct_CC CPPFLAGS LDFLAGS CFLAGS CC MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE am__untar am__tar AMTAR am__leading_dot SET_MAKE AWK mkdir_p MKDIR_P INSTALL_STRIP_PROGRAM STRIP install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking enable_maintainer_mode enable_dependency_tracking enable_shared enable_static with_pic enable_fast_install with_gnu_ld with_sysroot enable_libtool_lock ' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS CPP' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *=) ac_optarg= ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error $? "unrecognized option: \`$ac_option' Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used" >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures smp_utils 0.97 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/smp_utils] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of smp_utils 0.97:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors --enable-shared[=PKGS] build shared libraries [default=yes] --enable-static[=PKGS] build static libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-pic try to use only PIC/non-PIC objects [default=use both] --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-sysroot=DIR Search for dependent libraries within DIR (or the compiler's sysroot if not specified). Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to . _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF smp_utils configure 0.97 generated by GNU Autoconf 2.68 Copyright (C) 2010 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## # ac_fn_c_try_compile LINENO # -------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_compile # ac_fn_c_try_link LINENO # ----------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_link # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in # INCLUDES, setting the cache variable VAR accordingly. ac_fn_c_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_compile # ac_fn_c_try_cpp LINENO # ---------------------- # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } > conftest.i && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_cpp # ac_fn_c_try_run LINENO # ---------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. Assumes # that executables *can* be run. ac_fn_c_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then : ac_retval=0 else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=$ac_status fi rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_run # ac_fn_c_check_func LINENO FUNC VAR # ---------------------------------- # Tests whether FUNC exists, setting the cache variable VAR accordingly ac_fn_c_check_func () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Define $2 to an innocuous variant, in case declares $2. For example, HP-UX 11i declares gettimeofday. */ #define $2 innocuous_$2 /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $2 (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $2 /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $2 (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$2 || defined __stub___$2 choke me #endif int main () { return $2 (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_func cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by smp_utils $as_me 0.97, which was generated by GNU Autoconf 2.68. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo $as_echo "## ---------------- ## ## Cache variables. ## ## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo $as_echo "## ----------------- ## ## Output variables. ## ## ----------------- ##" echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then $as_echo "## ------------------- ## ## File substitutions. ## ## ------------------- ##" echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then $as_echo "## ----------- ## ## confdefs.h. ## ## ----------- ##" echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h $as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_URL "$PACKAGE_URL" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then # We do not want a PATH search for config.site. case $CONFIG_SITE in #(( -*) ac_site_file1=./$CONFIG_SITE;; */*) ac_site_file1=$CONFIG_SITE;; *) ac_site_file1=./$CONFIG_SITE;; esac elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" \ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "failed to load site script $ac_site_file See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special files # actually), so we avoid doing that. DJGPP emulates it as a regular file. if test /dev/null != "$cache_file" && test -f "$cache_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu am__api_version='1.11' ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if ${ac_cv_path_install+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in #(( ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Just in case sleep 1 echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; esac # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". as_fn_error $? "ls -t appears to fail. Make sure there is not a broken alias in your environment" "$LINENO" 5 fi test "$2" = conftest.file ) then # Ok. : else as_fn_error $? "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if ${ac_cv_path_mkdir+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi test -d ./--version && rmdir ./--version if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. MKDIR_P="$ac_install_sh -d" fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } mkdir_p="$MKDIR_P" case $mkdir_p in [\\/$]* | ?:[\\/]*) ;; */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_AWK+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering ...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE='smp_utils' VERSION='0.97' cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. AMTAR=${AMTAR-"${am_missing_run}tar"} am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } # Check whether --enable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then : enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval else USE_MAINTAINER_MODE=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 $as_echo "$USE_MAINTAINER_MODE" >&6; } if test $USE_MAINTAINER_MODE = yes; then MAINTAINER_MODE_TRUE= MAINTAINER_MODE_FALSE='#' else MAINTAINER_MODE_TRUE='#' MAINTAINER_MODE_FALSE= fi MAINT=$MAINTAINER_MODE_TRUE ac_config_headers="$ac_config_headers config.h" ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 $as_echo_n "checking whether the C compiler works... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi if test -z "$ac_file"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error 77 "C compiler cannot create executables See \`config.log' for more details" "$LINENO" 5; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 $as_echo_n "checking for C compiler default output file name... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of executables: cannot compile and link See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { FILE *f = fopen ("conftest.out", "w"); return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF ac_clean_files="$ac_clean_files conftest.out" # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } if test "$cross_compiling" != yes; then { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if { ac_try='./conftest$ac_cv_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details" "$LINENO" 5; } fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if ${ac_cv_objext+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of object files: cannot compile See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from `make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if ${am_cv_CC_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi # AC_PROG_CXX # Adding libtools to the build seems to bring in C++ environment case `pwd` in *\ * | *\ *) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 $as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; esac macro_version='2.4' macro_revision='1.3293' ltmain="$ac_aux_dir/ltmain.sh" # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } if ${ac_cv_build+:} false; then : $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; *) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' set x $ac_cv_build shift build_cpu=$1 build_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: build_os=$* IFS=$ac_save_IFS case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } if ${ac_cv_host+:} false; then : $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; *) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' set x $ac_cv_host shift host_cpu=$1 host_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: host_os=$* IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac # Backslashify metacharacters that are still active within # double-quoted strings. sed_quote_subst='s/\(["`$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 $as_echo_n "checking how to print strings... " >&6; } # Test print first, because it will be a builtin if present. if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='print -r --' elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='printf %s\n' else # Use this function as a fallback that always works. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } ECHO='func_fallback_echo' fi # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "" } case "$ECHO" in printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 $as_echo "printf" >&6; } ;; print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 $as_echo "print -r" >&6; } ;; *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 $as_echo "cat" >&6; } ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 $as_echo_n "checking for a sed that does not truncate output... " >&6; } if ${ac_cv_path_SED+:} false; then : $as_echo_n "(cached) " >&6 else ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ for ac_i in 1 2 3 4 5 6 7; do ac_script="$ac_script$as_nl$ac_script" done echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed { ac_script=; unset ac_script;} if test -z "$SED"; then ac_path_SED_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue # Check for GNU ac_path_SED and select it if it is found. # Check for GNU $ac_path_SED case `"$ac_path_SED" --version 2>&1` in *GNU*) ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo '' >> "conftest.nl" "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_SED_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_SED="$ac_path_SED" ac_path_SED_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_SED_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_SED"; then as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 fi else ac_cv_path_SED=$SED fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 $as_echo "$ac_cv_path_SED" >&6; } SED="$ac_cv_path_SED" rm -f conftest.sed test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if ${ac_cv_path_GREP+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if ${ac_cv_path_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 $as_echo_n "checking for fgrep... " >&6; } if ${ac_cv_path_FGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 then ac_cv_path_FGREP="$GREP -F" else if test -z "$FGREP"; then ac_path_FGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in fgrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue # Check for GNU ac_path_FGREP and select it if it is found. # Check for GNU $ac_path_FGREP case `"$ac_path_FGREP" --version 2>&1` in *GNU*) ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'FGREP' >> "conftest.nl" "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_FGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_FGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_FGREP"; then as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_FGREP=$FGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 $as_echo "$ac_cv_path_FGREP" >&6; } FGREP="$ac_cv_path_FGREP" test -z "$GREP" && GREP=grep # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi if ${lt_cv_path_LD+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } if ${lt_cv_prog_gnu_ld+:} false; then : $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } if ${lt_cv_path_NM+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done : ${lt_cv_path_NM=no} fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : # Let the user override the test. else if test -n "$ac_tool_prefix"; then for ac_prog in dumpbin "link -dump" do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DUMPBIN+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DUMPBIN"; then ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DUMPBIN=$ac_cv_prog_DUMPBIN if test -n "$DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 $as_echo "$DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$DUMPBIN" && break done fi if test -z "$DUMPBIN"; then ac_ct_DUMPBIN=$DUMPBIN for ac_prog in dumpbin "link -dump" do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DUMPBIN"; then ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN if test -n "$ac_ct_DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 $as_echo "$ac_ct_DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_DUMPBIN" && break done if test "x$ac_ct_DUMPBIN" = x; then DUMPBIN=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DUMPBIN=$ac_ct_DUMPBIN fi fi case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in *COFF*) DUMPBIN="$DUMPBIN -symbols" ;; *) DUMPBIN=: ;; esac fi if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" fi fi test -z "$NM" && NM=nm { $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 $as_echo_n "checking the name lister ($NM) interface... " >&6; } if ${lt_cv_nm_interface+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&5 (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&5 (eval echo "\"\$as_me:$LINENO: output\"" >&5) cat conftest.out >&5 if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 $as_echo "$lt_cv_nm_interface" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 $as_echo_n "checking whether ln -s works... " >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 $as_echo "no, using $LN_S" >&6; } fi # find the maximum length of command line arguments { $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 $as_echo_n "checking the maximum length of command line arguments... " >&6; } if ${lt_cv_sys_max_cmd_len+:} false; then : $as_echo_n "(cached) " >&6 else i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; mint*) # On MiNT this can take a long time and run out of memory. lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8 ; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac fi if test -n $lt_cv_sys_max_cmd_len ; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 $as_echo "$lt_cv_sys_max_cmd_len" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 $as_echo "none" >&6; } fi max_cmd_len=$lt_cv_sys_max_cmd_len : ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ = c,a/b,b/c, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 $as_echo "$xsi_shell" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 $as_echo_n "checking whether the shell understands \"+=\"... " >&6; } lt_shell_append=no ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 $as_echo "$lt_shell_append" >&6; } if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 $as_echo_n "checking how to convert $build file names to $host format... " >&6; } if ${lt_cv_to_host_file_cmd+:} false; then : $as_echo_n "(cached) " >&6 else case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ;; esac ;; *-*-cygwin* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_noop ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ;; esac ;; * ) # unhandled hosts (and "normal" native builds) lt_cv_to_host_file_cmd=func_convert_file_noop ;; esac fi to_host_file_cmd=$lt_cv_to_host_file_cmd { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 $as_echo "$lt_cv_to_host_file_cmd" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 $as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } if ${lt_cv_to_tool_file_cmd+:} false; then : $as_echo_n "(cached) " >&6 else #assume ordinary cross tools, or native build. lt_cv_to_tool_file_cmd=func_convert_file_noop case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ;; esac ;; esac fi to_tool_file_cmd=$lt_cv_to_tool_file_cmd { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 $as_echo "$lt_cv_to_tool_file_cmd" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 $as_echo_n "checking for $LD option to reload object files... " >&6; } if ${lt_cv_ld_reload_flag+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_reload_flag='-r' fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 $as_echo "$lt_cv_ld_reload_flag" >&6; } reload_flag=$lt_cv_ld_reload_flag case $reload_flag in "" | " "*) ;; *) reload_flag=" $reload_flag" ;; esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in cygwin* | mingw* | pw32* | cegcc*) if test "$GCC" != yes; then reload_cmds=false fi ;; darwin*) if test "$GCC" = yes; then reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' else reload_cmds='$LD$reload_flag -o $output$reload_objs' fi ;; esac if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OBJDUMP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OBJDUMP"; then ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 $as_echo "$OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OBJDUMP"; then ac_ct_OBJDUMP=$OBJDUMP # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OBJDUMP"; then ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OBJDUMP="objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 $as_echo "$ac_ct_OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OBJDUMP" = x; then OBJDUMP="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OBJDUMP=$ac_ct_OBJDUMP fi else OBJDUMP="$ac_cv_prog_OBJDUMP" fi test -z "$OBJDUMP" && OBJDUMP=objdump { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 $as_echo_n "checking how to recognize dependent libraries... " >&6; } if ${lt_cv_deplibs_check_method+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given extended regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix[4-9]*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi[45]*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin*) # func_win32_libid is a shell function defined in ltmain.sh lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' ;; mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else # Keep this pattern in sync with the one in func_win32_libid. lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc*) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; haiku*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[3-9]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 $as_echo "$lt_cv_deplibs_check_method" >&6; } file_magic_glob= want_nocaseglob=no if test "$build" = "$host"; then case $host_os in mingw* | pw32*) if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then want_nocaseglob=yes else file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` fi ;; esac fi file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ac_tool_prefix}dlltool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DLLTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DLLTOOL"; then ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DLLTOOL=$ac_cv_prog_DLLTOOL if test -n "$DLLTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 $as_echo "$DLLTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DLLTOOL"; then ac_ct_DLLTOOL=$DLLTOOL # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DLLTOOL"; then ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DLLTOOL="dlltool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL if test -n "$ac_ct_DLLTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 $as_echo "$ac_ct_DLLTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DLLTOOL" = x; then DLLTOOL="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DLLTOOL=$ac_ct_DLLTOOL fi else DLLTOOL="$ac_cv_prog_DLLTOOL" fi test -z "$DLLTOOL" && DLLTOOL=dlltool { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 $as_echo_n "checking how to associate runtime and link libraries... " >&6; } if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_sharedlib_from_linklib_cmd='unknown' case $host_os in cygwin* | mingw* | pw32* | cegcc*) # two different shell functions defined in ltmain.sh # decide which to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ;; *) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ;; esac ;; *) # fallback: assume linklib IS sharedlib lt_cv_sharedlib_from_linklib_cmd="$ECHO" ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 $as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO if test -n "$ac_tool_prefix"; then for ac_prog in ar do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_AR+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AR"; then ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AR="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 $as_echo "$AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AR" && break done fi if test -z "$AR"; then ac_ct_AR=$AR for ac_prog in ar do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_AR+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_AR"; then ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_AR="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 $as_echo "$ac_ct_AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_AR" && break done if test "x$ac_ct_AR" = x; then AR="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac AR=$ac_ct_AR fi fi : ${AR=ar} : ${AR_FLAGS=cru} { $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 $as_echo_n "checking for archiver @FILE support... " >&6; } if ${lt_cv_ar_at_file+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ar_at_file=no cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : echo conftest.$ac_objext > conftest.lst lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 (eval $lt_ar_try) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if test "$ac_status" -eq 0; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 (eval $lt_ar_try) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if test "$ac_status" -ne 0; then lt_cv_ar_at_file=@ fi fi rm -f conftest.* libconftest.a fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 $as_echo "$lt_cv_ar_at_file" >&6; } if test "x$lt_cv_ar_at_file" = xno; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi test -z "$STRIP" && STRIP=: if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 $as_echo "$RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_RANLIB="ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 $as_echo "$ac_ct_RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_RANLIB" = x; then RANLIB=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac RANLIB=$ac_ct_RANLIB fi else RANLIB="$ac_cv_prog_RANLIB" fi test -z "$RANLIB" && RANLIB=: # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi case $host_os in darwin*) lock_old_archive_extraction=yes ;; *) lock_old_archive_extraction=no ;; esac # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Check for command to grab the raw symbol name followed by C symbol from nm. { $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } if ${lt_cv_sys_global_symbol_pipe+:} false; then : $as_echo_n "(cached) " >&6 else # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[BCDEGRST]' # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[BCDT]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[ABCDGISTW]' ;; hpux*) if test "$host_cpu" = ia64; then symcode='[ABCDEGRST]' fi ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; osf*) symcode='[BCDEGQRST]' ;; solaris*) symcode='[BDRT]' ;; sco3.2v5*) symcode='[DT]' ;; sysv4.2uw2*) symcode='[DT]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[ABDT]' ;; sysv4) symcode='[DFNSTU]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[ABCDGIRSTW]' ;; esac # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function # and D for any global variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK '"\ " {last_section=section; section=\$ 3};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ " {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ " s[1]~/^[@?]/{print s[1], s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then # Now try to grab the symbols. nlist=conftest.nm if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ LT_DLSYM_CONST struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&5 fi else echo "cannot find nm_test_var in $nlist" >&5 fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 fi else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done fi if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 $as_echo "failed" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 $as_echo "ok" >&6; } fi # Response file support. if test "$lt_cv_nm_interface" = "MS dumpbin"; then nm_file_list_spec='@' elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then nm_file_list_spec='@' fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 $as_echo_n "checking for sysroot... " >&6; } # Check whether --with-sysroot was given. if test "${with_sysroot+set}" = set; then : withval=$with_sysroot; else with_sysroot=no fi lt_sysroot= case ${with_sysroot} in #( yes) if test "$GCC" = yes; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( /*) lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` ;; #( no|'') ;; #( *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 $as_echo "${with_sysroot}" >&6; } as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 $as_echo "${lt_sysroot:-no}" >&6; } # Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then : enableval=$enable_libtool_lock; fi test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '#line '$LINENO' "configure"' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 $as_echo_n "checking whether the C compiler needs -belf... " >&6; } if ${lt_cv_cc_needs_belf+:} false; then : $as_echo_n "(cached) " >&6 else ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_cc_needs_belf=yes else lt_cv_cc_needs_belf=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 $as_echo "$lt_cv_cc_needs_belf" >&6; } if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; sparc*-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) LD="${LD-ld} -m elf64_sparc" ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks="$enable_libtool_lock" if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. set dummy ${ac_tool_prefix}mt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$MANIFEST_TOOL"; then ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL if test -n "$MANIFEST_TOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 $as_echo "$MANIFEST_TOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_MANIFEST_TOOL"; then ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL # Extract the first word of "mt", so it can be a program name with args. set dummy mt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_MANIFEST_TOOL"; then ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL if test -n "$ac_ct_MANIFEST_TOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 $as_echo "$ac_ct_MANIFEST_TOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_MANIFEST_TOOL" = x; then MANIFEST_TOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL fi else MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" fi test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 $as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } if ${lt_cv_path_mainfest_tool+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_path_mainfest_tool=no echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out cat conftest.err >&5 if $GREP 'Manifest Tool' conftest.out > /dev/null; then lt_cv_path_mainfest_tool=yes fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 $as_echo "$lt_cv_path_mainfest_tool" >&6; } if test "x$lt_cv_path_mainfest_tool" != xyes; then MANIFEST_TOOL=: fi case $host_os in rhapsody* | darwin*) if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DSYMUTIL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DSYMUTIL"; then ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DSYMUTIL=$ac_cv_prog_DSYMUTIL if test -n "$DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 $as_echo "$DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DSYMUTIL"; then ac_ct_DSYMUTIL=$DSYMUTIL # Extract the first word of "dsymutil", so it can be a program name with args. set dummy dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DSYMUTIL"; then ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL if test -n "$ac_ct_DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 $as_echo "$ac_ct_DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DSYMUTIL" = x; then DSYMUTIL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DSYMUTIL=$ac_ct_DSYMUTIL fi else DSYMUTIL="$ac_cv_prog_DSYMUTIL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. set dummy ${ac_tool_prefix}nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_NMEDIT+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$NMEDIT"; then ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi NMEDIT=$ac_cv_prog_NMEDIT if test -n "$NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 $as_echo "$NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_NMEDIT"; then ac_ct_NMEDIT=$NMEDIT # Extract the first word of "nmedit", so it can be a program name with args. set dummy nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_NMEDIT"; then ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_NMEDIT="nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT if test -n "$ac_ct_NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 $as_echo "$ac_ct_NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_NMEDIT" = x; then NMEDIT=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac NMEDIT=$ac_ct_NMEDIT fi else NMEDIT="$ac_cv_prog_NMEDIT" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. set dummy ${ac_tool_prefix}lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_LIPO+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$LIPO"; then ac_cv_prog_LIPO="$LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_LIPO="${ac_tool_prefix}lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi LIPO=$ac_cv_prog_LIPO if test -n "$LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 $as_echo "$LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_LIPO"; then ac_ct_LIPO=$LIPO # Extract the first word of "lipo", so it can be a program name with args. set dummy lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_LIPO+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_LIPO"; then ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_LIPO="lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO if test -n "$ac_ct_LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 $as_echo "$ac_ct_LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_LIPO" = x; then LIPO=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac LIPO=$ac_ct_LIPO fi else LIPO="$ac_cv_prog_LIPO" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. set dummy ${ac_tool_prefix}otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL"; then ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OTOOL="${ac_tool_prefix}otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL=$ac_cv_prog_OTOOL if test -n "$OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 $as_echo "$OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL"; then ac_ct_OTOOL=$OTOOL # Extract the first word of "otool", so it can be a program name with args. set dummy otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL"; then ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OTOOL="otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL if test -n "$ac_ct_OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 $as_echo "$ac_ct_OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL" = x; then OTOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL=$ac_ct_OTOOL fi else OTOOL="$ac_cv_prog_OTOOL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. set dummy ${ac_tool_prefix}otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OTOOL64+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL64"; then ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL64=$ac_cv_prog_OTOOL64 if test -n "$OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 $as_echo "$OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL64"; then ac_ct_OTOOL64=$OTOOL64 # Extract the first word of "otool64", so it can be a program name with args. set dummy otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL64"; then ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OTOOL64="otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 if test -n "$ac_ct_OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 $as_echo "$ac_ct_OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL64" = x; then OTOOL64=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL64=$ac_ct_OTOOL64 fi else OTOOL64="$ac_cv_prog_OTOOL64" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 $as_echo_n "checking for -single_module linker flag... " >&6; } if ${lt_cv_apple_cc_single_mod+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&5 $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&5 fi rm -rf libconftest.dylib* rm -f conftest.* fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 $as_echo "$lt_cv_apple_cc_single_mod" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } if ${lt_cv_ld_exported_symbols_list+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_ld_exported_symbols_list=yes else lt_cv_ld_exported_symbols_list=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 $as_echo_n "checking for -force_load linker flag... " >&6; } if ${lt_cv_ld_force_load+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_force_load=no cat > conftest.c << _LT_EOF int forced_loaded() { return 2;} _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 echo "$AR cru libconftest.a conftest.o" >&5 $AR cru libconftest.a conftest.o 2>&5 echo "$RANLIB libconftest.a" >&5 $RANLIB libconftest.a 2>&5 cat > conftest.c << _LT_EOF int main() { return 0;} _LT_EOF echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err _lt_result=$? if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then lt_cv_ld_force_load=yes else cat conftest.err >&5 fi rm -f conftest.err libconftest.a conftest conftest.c rm -rf conftest.dSYM fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 $as_echo "$lt_cv_ld_force_load" >&6; } case $host_os in rhapsody* | darwin1.[012]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[91]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[012]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if ${ac_cv_prog_CPP+:} false; then : $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details" "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if ${ac_cv_header_stdc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in dlfcn.h do : ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default " if test "x$ac_cv_header_dlfcn_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_DLFCN_H 1 _ACEOF fi done # Set options enable_dlopen=no enable_win32_dll=no # Check whether --enable-shared was given. if test "${enable_shared+set}" = set; then : enableval=$enable_shared; p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac else enable_shared=yes fi # Check whether --enable-static was given. if test "${enable_static+set}" = set; then : enableval=$enable_static; p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac else enable_static=yes fi # Check whether --with-pic was given. if test "${with_pic+set}" = set; then : withval=$with_pic; pic_mode="$withval" else pic_mode=default fi test -z "$pic_mode" && pic_mode=default # Check whether --enable-fast-install was given. if test "${enable_fast_install+set}" = set; then : enableval=$enable_fast_install; p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac else enable_fast_install=yes fi # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ltmain" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' test -z "$LN_S" && LN_S="ln -s" if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 $as_echo_n "checking for objdir... " >&6; } if ${lt_cv_objdir+:} false; then : $as_echo_n "(cached) " >&6 else rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 $as_echo "$lt_cv_objdir" >&6; } objdir=$lt_cv_objdir cat >>confdefs.h <<_ACEOF #define LT_OBJDIR "$lt_cv_objdir/" _ACEOF case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld="$lt_cv_prog_gnu_ld" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } if ${lt_cv_path_MAGIC_CMD+:} false; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/${ac_tool_prefix}file; then lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 $as_echo_n "checking for file... " >&6; } if ${lt_cv_path_MAGIC_CMD+:} false; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/file; then lt_cv_path_MAGIC_CMD="$ac_dir/file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi else MAGIC_CMD=: fi fi fi ;; esac # Use C for the default configuration in the libtool script lt_save_CC="$CC" ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o objext=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* if test -n "$compiler"; then lt_prog_compiler_no_builtin_flag= if test "$GCC" = yes; then case $cc_basename in nvcc*) lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; *) lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-fno-rtti -fno-exceptions" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" else : fi fi lt_prog_compiler_wl= lt_prog_compiler_pic= lt_prog_compiler_static= if test "$GCC" = yes; then lt_prog_compiler_wl='-Wl,' lt_prog_compiler_static='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support lt_prog_compiler_pic='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic='-fno-common' ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. lt_prog_compiler_static= ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) lt_prog_compiler_pic='-fPIC' ;; esac ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. lt_prog_compiler_can_build_shared=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic=-Kconform_pic fi ;; *) lt_prog_compiler_pic='-fPIC' ;; esac case $cc_basename in nvcc*) # Cuda Compiler Driver 2.2 lt_prog_compiler_wl='-Xlinker ' lt_prog_compiler_pic='-Xcompiler -fPIC' ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) lt_prog_compiler_wl='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' else lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' fi ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic='-DDLL_EXPORT' ;; hpux9* | hpux10* | hpux11*) lt_prog_compiler_wl='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? lt_prog_compiler_static='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) lt_prog_compiler_wl='-Wl,' # PIC (with -KPIC) is the default. lt_prog_compiler_static='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; # Lahey Fortran 8.1. lf95*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='--shared' lt_prog_compiler_static='--static' ;; nagfor*) # NAG Fortran compiler lt_prog_compiler_wl='-Wl,-Wl,,' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; ccc*) lt_prog_compiler_wl='-Wl,' # All Alpha code is PIC. lt_prog_compiler_static='-non_shared' ;; xl* | bgxl* | bgf* | mpixl*) # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-qpic' lt_prog_compiler_static='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ F* | *Sun*Fortran*) # Sun Fortran 8.3 passes all unrecognized flags to the linker lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='' ;; *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Wl,' ;; esac ;; esac ;; newsos6) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; osf3* | osf4* | osf5*) lt_prog_compiler_wl='-Wl,' # All OSF/1 code is PIC. lt_prog_compiler_static='-non_shared' ;; rdos*) lt_prog_compiler_static='-non_shared' ;; solaris*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' case $cc_basename in f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) lt_prog_compiler_wl='-Qoption ld ';; *) lt_prog_compiler_wl='-Wl,';; esac ;; sunos4*) lt_prog_compiler_wl='-Qoption ld ' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then lt_prog_compiler_pic='-Kconform_pic' lt_prog_compiler_static='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; unicos*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_can_build_shared=no ;; uts4*) lt_prog_compiler_pic='-pic' lt_prog_compiler_static='-Bstatic' ;; *) lt_prog_compiler_can_build_shared=no ;; esac fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= ;; *) lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 $as_echo_n "checking for $compiler option to produce PIC... " >&6; } if ${lt_cv_prog_compiler_pic+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic=$lt_prog_compiler_pic fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 $as_echo "$lt_cv_prog_compiler_pic" >&6; } lt_prog_compiler_pic=$lt_cv_prog_compiler_pic # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } if ${lt_cv_prog_compiler_pic_works+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic -DPIC" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } if test x"$lt_cv_prog_compiler_pic_works" = xyes; then case $lt_prog_compiler_pic in "" | " "*) ;; *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; esac else lt_prog_compiler_pic= lt_prog_compiler_can_build_shared=no fi fi # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } if ${lt_cv_prog_compiler_static_works+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works=yes fi else lt_cv_prog_compiler_static_works=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 $as_echo "$lt_cv_prog_compiler_static_works" >&6; } if test x"$lt_cv_prog_compiler_static_works" = xyes; then : else lt_prog_compiler_static= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } runpath_var= allow_undefined_flag= always_export_symbols=no archive_cmds= archive_expsym_cmds= compiler_needs_object=no enable_shared_with_static_runtimes=no export_dynamic_flag_spec= export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' hardcode_automatic=no hardcode_direct=no hardcode_direct_absolute=no hardcode_libdir_flag_spec= hardcode_libdir_flag_spec_ld= hardcode_libdir_separator= hardcode_minus_L=no hardcode_shlibpath_var=unsupported inherit_rpath=no link_all_deplibs=unknown module_cmds= module_expsym_cmds= old_archive_from_new_cmds= old_archive_from_expsyms_cmds= thread_safe_flag_spec= whole_archive_flag_spec= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; linux* | k*bsd*-gnu | gnu*) link_all_deplibs=no ;; esac ld_shlibs=yes # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility # with the native linker. However, as the warning in the GNU ld # block says, versions before 2.19.5* couldn't really create working # shared libraries, regardless of the interface used. case `$LD -v 2>&1` in *\ \(GNU\ Binutils\)\ 2.19.5*) ;; *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; *\ \(GNU\ Binutils\)\ [3-9]*) ;; *) lt_use_gnu_ld_interface=yes ;; esac ;; *) lt_use_gnu_ld_interface=yes ;; esac fi if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec= fi supports_anon_versioning=no case `$LD -v 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.19, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to install binutils *** 2.20 or above, or modify your PATH so that a non-GNU linker is found. *** You will then need to restart the configuration process. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' export_dynamic_flag_spec='${wl}--export-all-symbols' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs=no fi ;; haiku*) archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' link_all_deplibs=yes ;; interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 whole_archive_flag_spec= tmp_sharedflag='--shared' ;; xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi case $cc_basename in xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' hardcode_libdir_flag_spec= hardcode_libdir_flag_spec_ld='-rpath $libdir' archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else ld_shlibs=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac ;; sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct=yes hardcode_shlibpath_var=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = no; then runpath_var= hardcode_libdir_flag_spec= export_dynamic_flag_spec= whole_archive_flag_spec= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag=unsupported always_export_symbols=yes archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global # defined symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds='' hardcode_direct=yes hardcode_direct_absolute=yes hardcode_libdir_separator=':' link_all_deplibs=yes file_list_spec='${wl}-f,' if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi link_all_deplibs=no else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi export_dynamic_flag_spec='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an # empty executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath_ fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath_ fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag=' ${wl}-bernotok' allow_undefined_flag=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec='$convenience' fi archive_cmds_need_lc=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; bsdi[45]*) export_dynamic_flag_spec=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in cl*) # Native MSVC hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported always_export_symbols=yes file_list_spec='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, )='true' enable_shared_with_static_runtimes=yes export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' # Don't use ranlib old_postinstall_cmds='chmod 644 $oldlib' postlink_cmds='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # Assume MSVC wrapper hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_from_new_cmds='true' # FIXME: Should let the user specify the lib program. old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' enable_shared_with_static_runtimes=yes ;; esac ;; darwin* | rhapsody*) archive_cmds_need_lc=no hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported if test "$lt_cv_ld_force_load" = "yes"; then whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else whole_archive_flag_spec='' fi link_all_deplibs=yes allow_undefined_flag="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=func_echo_all archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" else ld_shlibs=no fi ;; dgux*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; freebsd1*) ld_shlibs=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; hpux9*) if test "$GCC" = yes; then archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes export_dynamic_flag_spec='${wl}-E' ;; hpux10*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_flag_spec_ld='+b $libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes fi ;; hpux11*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) # Older versions of the 11.00 compiler do not understand -b yet # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 $as_echo_n "checking if $CC understands -b... " >&6; } if ${lt_cv_prog_compiler__b+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler__b=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -b" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler__b=yes fi else lt_cv_prog_compiler__b=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 $as_echo "$lt_cv_prog_compiler__b" >&6; } if test x"$lt_cv_prog_compiler__b" = xyes; then archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi ;; esac fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: case $host_cpu in hppa*64*|ia64*) hardcode_direct=no hardcode_shlibpath_var=no ;; *) hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. # This should be the same for all languages, so no per-tag cache variable. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 $as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } if ${lt_cv_irix_exported_symbol+:} false; then : $as_echo_n "(cached) " >&6 else save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int foo (void) { return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_irix_exported_symbol=yes else lt_cv_irix_exported_symbol=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 $as_echo "$lt_cv_irix_exported_symbol" >&6; } if test "$lt_cv_irix_exported_symbol" = yes; then archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' fi else archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: inherit_rpath=yes link_all_deplibs=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; *nto* | *qnx*) ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes hardcode_shlibpath_var=no hardcode_direct_absolute=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' else case $host_os in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-R$libdir' ;; *) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi else ld_shlibs=no fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi archive_cmds_need_lc='no' hardcode_libdir_separator=: ;; solaris*) no_undefined_flag=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='${wl}' archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else whole_archive_flag_spec='-z allextract$convenience -z defaultextract' fi ;; esac link_all_deplibs=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; sysv4) case $host_vendor in sni) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' reload_cmds='$CC -r -o $output$reload_objs' hardcode_direct=no ;; motorola) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; sysv4.3*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no export_dynamic_flag_spec='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag='${wl}-z,text' archive_cmds_need_lc=no hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag='${wl}-z,text' allow_undefined_flag='${wl}-z,nodefs' archive_cmds_need_lc=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-R,$libdir' hardcode_libdir_separator=':' link_all_deplibs=yes export_dynamic_flag_spec='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; *) ld_shlibs=no ;; esac if test x$host_vendor = xsni; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) export_dynamic_flag_spec='${wl}-Blargedynsym' ;; esac fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 $as_echo "$ld_shlibs" >&6; } test "$ld_shlibs" = no && can_build_shared=no with_gnu_ld=$with_gnu_ld # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc" in x|xyes) # Assume -lc should be added archive_cmds_need_lc=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } if ${lt_cv_archive_cmds_need_lc+:} false; then : $as_echo_n "(cached) " >&6 else $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl pic_flag=$lt_prog_compiler_pic compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag allow_undefined_flag= if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then lt_cv_archive_cmds_need_lc=no else lt_cv_archive_cmds_need_lc=yes fi allow_undefined_flag=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 $as_echo "$lt_cv_archive_cmds_need_lc" >&6; } archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc ;; esac fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac case $host_os in mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; *) lt_sed_strip_eq="s,=/,/,g" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` ;; *) lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` ;; esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[lt_foo]++; } if (lt_freq[lt_foo] == 1) { print lt_foo; } }'` # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's,/\([A-Za-z]:\),\1,g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' library_names_spec='${libname}.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec="$LIB" if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[123]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; haiku*) version_type=linux need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=yes sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[3-9]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH if ${lt_cv_shlibpath_overrides_runpath+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : lt_cv_shlibpath_overrides_runpath=yes fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS libdir=$save_libdir fi shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action= if test -n "$hardcode_libdir_flag_spec" || test -n "$runpath_var" || test "X$hardcode_automatic" = "Xyes" ; then # We can hardcode non-existent directories. if test "$hardcode_direct" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && test "$hardcode_minus_L" != no; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action=unsupported fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 $as_echo "$hardcode_action" >&6; } if test "$hardcode_action" = relink || test "$inherit_rpath" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes fi ;; *) ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" if test "x$ac_cv_func_shl_load" = xyes; then : lt_cv_dlopen="shl_load" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 $as_echo_n "checking for shl_load in -ldld... " >&6; } if ${ac_cv_lib_dld_shl_load+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char shl_load (); int main () { return shl_load (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_shl_load=yes else ac_cv_lib_dld_shl_load=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 $as_echo "$ac_cv_lib_dld_shl_load" >&6; } if test "x$ac_cv_lib_dld_shl_load" = xyes; then : lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" else ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" if test "x$ac_cv_func_dlopen" = xyes; then : lt_cv_dlopen="dlopen" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } if ${ac_cv_lib_svld_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_svld_dlopen=yes else ac_cv_lib_svld_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } if test "x$ac_cv_lib_svld_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } if ${ac_cv_lib_dld_dld_link+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dld_link (); int main () { return dld_link (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_dld_link=yes else ac_cv_lib_dld_dld_link=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } if test "x$ac_cv_lib_dld_dld_link" = xyes; then : lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" fi fi fi fi fi fi ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 $as_echo_n "checking whether a program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; esac else : # compilation failed lt_cv_dlopen_self=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 $as_echo "$lt_cv_dlopen_self" >&6; } if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self_static+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; esac else : # compilation failed lt_cv_dlopen_self_static=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 $as_echo "$lt_cv_dlopen_self_static" >&6; } fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi striplib= old_striplib= { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 $as_echo_n "checking whether stripping libraries is possible... " >&6; } if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi ;; *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } ;; esac fi # Report which library types will actually be built { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 $as_echo_n "checking if libtool supports shared libraries... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 $as_echo "$can_build_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 $as_echo_n "checking whether to build shared libraries... " >&6; } test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[4-9]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 $as_echo "$enable_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 $as_echo_n "checking whether to build static libraries... " >&6; } # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 $as_echo "$enable_static" >&6; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC="$lt_save_CC" ac_config_commands="$ac_config_commands libtool" # Only expand once: # check for headers { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if ${ac_cv_header_stdc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi for ac_header in linux/types.h linux/bsg.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "#ifdef HAVE_LINUX_TYPES_H # include #endif " if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done # AC_CHECK_FUNCS(getopt_long, # GETOPT_O_FILES='', # GETOPT_O_FILES='getopt_long.o') # AC_SUBST(GETOPT_O_FILES) cat >>confdefs.h <<_ACEOF #define SMP_UTILS_BUILD_HOST "${host}" _ACEOF case "${host}" in *-*-linux-gnu*) os_deps='sg_pt_linux.o' cat >>confdefs.h <<_ACEOF #define SMP_UTILS_LINUX 1 _ACEOF os_libs='' ;; *-*-linux*) os_deps='sg_pt_linux.o' cat >>confdefs.h <<_ACEOF #define SMP_UTILS_LINUX 1 _ACEOF os_libs='' ;; *-*-freebsd*|*-*-kfreebsd*-gnu*) os_deps='sg_pt_freebsd.o' cat >>confdefs.h <<_ACEOF #define SMP_UTILS_FREEBSD 1 _ACEOF os_libs='-lcam' ;; *-*-solaris*) os_deps='sg_pt_solaris.o' cat >>confdefs.h <<_ACEOF #define SMP_UTILS_SOLARIS 1 _ACEOF os_libs='' ;; *) os_deps='sg_pt_linux.o' cat >>confdefs.h <<_ACEOF #define SMP_UTILS_LINUX 1 _ACEOF os_libs='' ;; esac # Define platform-specific symbol. if echo $host_os | grep 'freebsd' > /dev/null; then OS_FREEBSD_TRUE= OS_FREEBSD_FALSE='#' else OS_FREEBSD_TRUE='#' OS_FREEBSD_FALSE= fi if echo $host_os | grep '^linux' > /dev/null; then OS_LINUX_TRUE= OS_LINUX_FALSE='#' else OS_LINUX_TRUE='#' OS_LINUX_FALSE= fi if echo $host_os | grep '^solaris' > /dev/null; then OS_SOLARIS_TRUE= OS_SOLARIS_FALSE='#' else OS_SOLARIS_TRUE='#' OS_SOLARIS_FALSE= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for smp_send_req in -lsmputils1" >&5 $as_echo_n "checking for smp_send_req in -lsmputils1... " >&6; } if ${ac_cv_lib_smputils1_smp_send_req+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsmputils1 $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char smp_send_req (); int main () { return smp_send_req (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_smputils1_smp_send_req=yes else ac_cv_lib_smputils1_smp_send_req=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_smputils1_smp_send_req" >&5 $as_echo "$ac_cv_lib_smputils1_smp_send_req" >&6; } if test "x$ac_cv_lib_smputils1_smp_send_req" = xyes; then : SMPUTILS_LIBS="-lsmputils1"; have_smputils=yes else have_smputils=no fi if test x"$have_smputils" = xyes; then HAVE_SMPUTILS_TRUE= HAVE_SMPUTILS_FALSE='#' else HAVE_SMPUTILS_TRUE='#' HAVE_SMPUTILS_FALSE= fi ac_config_files="$ac_config_files Makefile include/Makefile lib/Makefile src/Makefile doc/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then if test "x$cache_file" != "x/dev/null"; then { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} if test ! -f "$cache_file" || test -h "$cache_file"; then cat confcache >"$cache_file" else case $cache_file in #( */* | ?:*) mv -f confcache "$cache_file"$$ && mv -f "$cache_file"$$ "$cache_file" ;; #( *) mv -f confcache "$cache_file" ;; esac fi fi else { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' else am__EXEEXT_TRUE='#' am__EXEEXT_FALSE= fi if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then as_fn_error $? "conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${OS_FREEBSD_TRUE}" && test -z "${OS_FREEBSD_FALSE}"; then as_fn_error $? "conditional \"OS_FREEBSD\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${OS_LINUX_TRUE}" && test -z "${OS_LINUX_FALSE}"; then as_fn_error $? "conditional \"OS_LINUX\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${OS_SOLARIS_TRUE}" && test -z "${OS_SOLARIS_FALSE}"; then as_fn_error $? "conditional \"OS_SOLARIS\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${HAVE_SMPUTILS_TRUE}" && test -z "${HAVE_SMPUTILS_FALSE}"; then as_fn_error $? "conditional \"HAVE_SMPUTILS\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi : "${CONFIG_STATUS=./config.status}" ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in #( -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by smp_utils $as_me 0.97, which was generated by GNU Autoconf 2.68. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ smp_utils config.status 0.97 configured by $0, generated by GNU Autoconf 2.68, with options \\"\$ac_cs_config\\" Copyright (C) 2010 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; --*=) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg= ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header as_fn_error $? "ambiguous option: \`$1' Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error $? "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`' hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$1 _LTECHO_EOF' } # Quote evaled strings. for var in SHELL \ ECHO \ SED \ GREP \ EGREP \ FGREP \ LD \ NM \ LN_S \ lt_SP2NL \ lt_NL2SP \ reload_flag \ OBJDUMP \ deplibs_check_method \ file_magic_cmd \ file_magic_glob \ want_nocaseglob \ DLLTOOL \ sharedlib_from_linklib_cmd \ AR \ AR_FLAGS \ archiver_list_spec \ STRIP \ RANLIB \ CC \ CFLAGS \ compiler \ lt_cv_sys_global_symbol_pipe \ lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ nm_file_list_spec \ lt_prog_compiler_no_builtin_flag \ lt_prog_compiler_pic \ lt_prog_compiler_wl \ lt_prog_compiler_static \ lt_cv_prog_compiler_c_o \ need_locks \ MANIFEST_TOOL \ DSYMUTIL \ NMEDIT \ LIPO \ OTOOL \ OTOOL64 \ shrext_cmds \ export_dynamic_flag_spec \ whole_archive_flag_spec \ compiler_needs_object \ with_gnu_ld \ allow_undefined_flag \ no_undefined_flag \ hardcode_libdir_flag_spec \ hardcode_libdir_flag_spec_ld \ hardcode_libdir_separator \ exclude_expsyms \ include_expsyms \ file_list_spec \ variables_saved_for_relink \ libname_spec \ library_names_spec \ soname_spec \ install_override_mode \ finish_eval \ old_striplib \ striplib; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in reload_cmds \ old_postinstall_cmds \ old_postuninstall_cmds \ old_archive_cmds \ extract_expsyms_cmds \ old_archive_from_new_cmds \ old_archive_from_expsyms_cmds \ archive_cmds \ archive_expsym_cmds \ module_cmds \ module_expsym_cmds \ export_symbols_cmds \ prelink_cmds \ postlink_cmds \ postinstall_cmds \ postuninstall_cmds \ finish_cmds \ sys_lib_search_path_spec \ sys_lib_dlsearch_path_spec; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done ac_aux_dir='$ac_aux_dir' xsi_shell='$xsi_shell' lt_shell_append='$lt_shell_append' # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi PACKAGE='$PACKAGE' VERSION='$VERSION' TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile' _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "include/Makefile") CONFIG_FILES="$CONFIG_FILES include/Makefile" ;; "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;; "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= ac_tmp= trap 'exit_status=$? : "${ac_tmp:=$tmp}" { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ac_tmp=$tmp # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$ac_tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove sole $(srcdir), # ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ h s/// s/^/:/ s/[ ]*$/:/ s/:\$(srcdir):/:/g s/:\${srcdir}:/:/g s/:@srcdir@:/:/g s/^:*// s/:*$// x s/\(=[ ]*\).*/\1/ G s/\n// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$ac_tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_tt=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_tt"; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$ac_tmp/stdin" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ "$ac_tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$ac_tmp/stdin" case $ac_file in -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; esac \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" } >"$ac_tmp/config.h" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$ac_tmp/config.h" "$ac_file" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ || as_fn_error $? "could not create -" "$LINENO" 5 fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || { # Autoconf 2.62 quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir=$dirpart/$fdir; as_fn_mkdir_p # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ;; "libtool":C) # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi cfgfile="${ofile}T" trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008, 2009, 2010 Free Software Foundation, # Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. # # GNU Libtool is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, or # obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # The names of the tagged configurations supported by this script. available_tags="" # ### BEGIN LIBTOOL CONFIG # Which release of libtool.m4 was used? macro_version=$macro_version macro_revision=$macro_revision # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # What type of objects to build. pic_mode=$pic_mode # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # An echo program that protects backslashes. ECHO=$lt_ECHO # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # A sed program that does not truncate output. SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="\$SED -e 1s/^X//" # A grep program that handles long lines. GREP=$lt_GREP # An ERE matcher. EGREP=$lt_EGREP # A literal string matcher. FGREP=$lt_FGREP # A BSD- or MS-compatible name lister. NM=$lt_NM # Whether we need soft or hard links. LN_S=$lt_LN_S # What is the maximum length of a command? max_cmd_len=$max_cmd_len # Object file suffix (normally "o"). objext=$ac_objext # Executable file suffix (normally ""). exeext=$exeext # whether the shell understands "unset". lt_unset=$lt_unset # turn spaces into newlines. SP2NL=$lt_lt_SP2NL # turn newlines into spaces. NL2SP=$lt_lt_NL2SP # convert \$build file names to \$host format. to_host_file_cmd=$lt_cv_to_host_file_cmd # convert \$build files to toolchain format. to_tool_file_cmd=$lt_cv_to_tool_file_cmd # An object symbol dumper. OBJDUMP=$lt_OBJDUMP # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method = "file_magic". file_magic_cmd=$lt_file_magic_cmd # How to find potential files when deplibs_check_method = "file_magic". file_magic_glob=$lt_file_magic_glob # Find potential files using nocaseglob when deplibs_check_method = "file_magic". want_nocaseglob=$lt_want_nocaseglob # DLL creation program. DLLTOOL=$lt_DLLTOOL # Command to associate shared and link libraries. sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd # The archiver. AR=$lt_AR # Flags to create an archive. AR_FLAGS=$lt_AR_FLAGS # How to feed a file listing to the archiver. archiver_list_spec=$lt_archiver_list_spec # A symbol stripping program. STRIP=$lt_STRIP # Commands used to install an old-style archive. RANLIB=$lt_RANLIB old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Whether to use a lock for old archive extraction. lock_old_archive_extraction=$lock_old_archive_extraction # A C compiler. LTCC=$lt_CC # LTCC compiler flags. LTCFLAGS=$lt_CFLAGS # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration. global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair. global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # Transform the output of nm in a C name address pair when lib prefix is needed. global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix # Specify filename containing input files for \$NM. nm_file_list_spec=$lt_nm_file_list_spec # The root where to search for dependent libraries,and in which our libraries should be installed. lt_sysroot=$lt_sysroot # The name of the directory that contains temporary libtool files. objdir=$objdir # Used to examine libraries when file_magic_cmd begins with "file". MAGIC_CMD=$MAGIC_CMD # Must we lock files when doing compilation? need_locks=$lt_need_locks # Manifest tool. MANIFEST_TOOL=$lt_MANIFEST_TOOL # Tool to manipulate archived DWARF debug symbol files on Mac OS X. DSYMUTIL=$lt_DSYMUTIL # Tool to change global to local symbols on Mac OS X. NMEDIT=$lt_NMEDIT # Tool to manipulate fat objects and archives on Mac OS X. LIPO=$lt_LIPO # ldd/readelf like tool for Mach-O binaries on Mac OS X. OTOOL=$lt_OTOOL # ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. OTOOL64=$lt_OTOOL64 # Old archive suffix (normally "a"). libext=$libext # Shared library suffix (normally ".so"). shrext_cmds=$lt_shrext_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Variables whose values should be saved in libtool wrapper scripts and # restored at link time. variables_saved_for_relink=$lt_variables_saved_for_relink # Do we need the "lib" prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Library versioning type. version_type=$version_type # Shared library runtime path variable. runpath_var=$runpath_var # Shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Permission mode override for installation of shared libraries. install_override_mode=$lt_install_override_mode # Command to use after installation of a shared archive. postinstall_cmds=$lt_postinstall_cmds # Command to use after uninstallation of a shared archive. postuninstall_cmds=$lt_postuninstall_cmds # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # As "finish_cmds", except a single script fragment to be evaled but # not shown. finish_eval=$lt_finish_eval # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Compile-time system search path for libraries. sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries. sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # The linker used to build libraries. LD=$lt_LD # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds # A language specific compiler. CC=$lt_compiler # Is the compiler the GNU compiler? with_gcc=$GCC # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc # Whether or not to disallow shared libs when runtime libs are static. allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec # Whether the compiler copes with passing no objects directly. compiler_needs_object=$lt_compiler_needs_object # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds # Commands used to build a shared archive. archive_cmds=$lt_archive_cmds archive_expsym_cmds=$lt_archive_expsym_cmds # Commands used to build a loadable module if different from building # a shared archive. module_cmds=$lt_module_cmds module_expsym_cmds=$lt_module_expsym_cmds # Whether we are building with GNU ld or not. with_gnu_ld=$lt_with_gnu_ld # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag # Flag that enforces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # If ld is used when linking, flag to hardcode \$libdir into a binary # during linking. This must work even if \$libdir does not exist. hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary and the resulting library dependency is # "absolute",i.e impossible to change by setting \${shlibpath_var} if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute # Set to "yes" if using the -LDIR flag during linking hardcodes DIR # into the resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR # into the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Set to "yes" if building a shared library automatically hardcodes DIR # into the library and all subsequent libraries and executables linked # against it. hardcode_automatic=$hardcode_automatic # Set to yes if linker adds runtime paths of dependent libraries # to runtime path list. inherit_rpath=$inherit_rpath # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms # Symbols that must always be exported. include_expsyms=$lt_include_expsyms # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds # Commands necessary for finishing linking programs. postlink_cmds=$lt_postlink_cmds # Specify filename containing input files. file_list_spec=$lt_file_list_spec # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # ### END LIBTOOL CONFIG _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac ltmain="$ac_aux_dir/ltmain.sh" # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) if test x"$xsi_shell" = xyes; then sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ func_dirname ()\ {\ \ case ${1} in\ \ */*) func_dirname_result="${1%/*}${2}" ;;\ \ * ) func_dirname_result="${3}" ;;\ \ esac\ } # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_basename ()$/,/^} # func_basename /c\ func_basename ()\ {\ \ func_basename_result="${1##*/}"\ } # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ func_dirname_and_basename ()\ {\ \ case ${1} in\ \ */*) func_dirname_result="${1%/*}${2}" ;;\ \ * ) func_dirname_result="${3}" ;;\ \ esac\ \ func_basename_result="${1##*/}"\ } # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ func_stripname ()\ {\ \ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ \ # positional parameters, so assign one to ordinary parameter first.\ \ func_stripname_result=${3}\ \ func_stripname_result=${func_stripname_result#"${1}"}\ \ func_stripname_result=${func_stripname_result%"${2}"}\ } # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ func_split_long_opt ()\ {\ \ func_split_long_opt_name=${1%%=*}\ \ func_split_long_opt_arg=${1#*=}\ } # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ func_split_short_opt ()\ {\ \ func_split_short_opt_arg=${1#??}\ \ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ } # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ func_lo2o ()\ {\ \ case ${1} in\ \ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ \ *) func_lo2o_result=${1} ;;\ \ esac\ } # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_xform ()$/,/^} # func_xform /c\ func_xform ()\ {\ func_xform_result=${1%.*}.lo\ } # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_arith ()$/,/^} # func_arith /c\ func_arith ()\ {\ func_arith_result=$(( $* ))\ } # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_len ()$/,/^} # func_len /c\ func_len ()\ {\ func_len_result=${#1}\ } # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$lt_shell_append" = xyes; then sed -e '/^func_append ()$/,/^} # func_append /c\ func_append ()\ {\ eval "${1}+=\\${2}"\ } # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ func_append_quoted ()\ {\ \ func_quote_for_eval "${2}"\ \ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ } # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: # Save a `func_append' function call where possible by direct use of '+=' sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: else # Save a `func_append' function call even when '+=' is not available sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$_lt_function_replace_fail" = x":"; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 $as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} fi mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit 1 fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi smp_utils-0.97/lib/0000755000175000017500000000000011706323060013230 5ustar douggdouggsmp_utils-0.97/lib/Makefile.in0000664000175000017500000004410311661054767015320 0ustar douggdougg# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = lib DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(libdir)" LTLIBRARIES = $(lib_LTLIBRARIES) libsmputils1_la_DEPENDENCIES = am__libsmputils1_la_SOURCES_DIST = smp_lib.c smp_fre_cam.c \ smp_lin_bsg.c smp_lin_sel.c smp_mptctl_io.c smp_sol_usmp.c @OS_FREEBSD_FALSE@@OS_LINUX_FALSE@@OS_SOLARIS_TRUE@am_libsmputils1_la_OBJECTS = \ @OS_FREEBSD_FALSE@@OS_LINUX_FALSE@@OS_SOLARIS_TRUE@ smp_lib.lo \ @OS_FREEBSD_FALSE@@OS_LINUX_FALSE@@OS_SOLARIS_TRUE@ smp_sol_usmp.lo @OS_FREEBSD_FALSE@@OS_LINUX_TRUE@am_libsmputils1_la_OBJECTS = \ @OS_FREEBSD_FALSE@@OS_LINUX_TRUE@ smp_lib.lo smp_lin_bsg.lo \ @OS_FREEBSD_FALSE@@OS_LINUX_TRUE@ smp_lin_sel.lo \ @OS_FREEBSD_FALSE@@OS_LINUX_TRUE@ smp_mptctl_io.lo @OS_FREEBSD_TRUE@am_libsmputils1_la_OBJECTS = smp_lib.lo \ @OS_FREEBSD_TRUE@ smp_fre_cam.lo am__EXTRA_libsmputils1_la_SOURCES_DIST = smp_dummy.c libsmputils1_la_OBJECTS = $(am_libsmputils1_la_OBJECTS) libsmputils1_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(libsmputils1_la_LDFLAGS) $(LDFLAGS) -o $@ DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libsmputils1_la_SOURCES) $(EXTRA_libsmputils1_la_SOURCES) DIST_SOURCES = $(am__libsmputils1_la_SOURCES_DIST) \ $(am__EXTRA_libsmputils1_la_SOURCES_DIST) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ SMPUTILS_LIBS = @SMPUTILS_LIBS@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ os_deps = @os_deps@ os_libs = @os_libs@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ @OS_FREEBSD_TRUE@libsmputils1_la_SOURCES = \ @OS_FREEBSD_TRUE@ smp_lib.c \ @OS_FREEBSD_TRUE@ smp_fre_cam.c @OS_LINUX_TRUE@libsmputils1_la_SOURCES = \ @OS_LINUX_TRUE@ smp_lib.c \ @OS_LINUX_TRUE@ smp_lin_bsg.c \ @OS_LINUX_TRUE@ smp_lin_sel.c \ @OS_LINUX_TRUE@ smp_mptctl_io.c @OS_SOLARIS_TRUE@libsmputils1_la_SOURCES = \ @OS_SOLARIS_TRUE@ smp_lib.c \ @OS_SOLARIS_TRUE@ smp_sol_usmp.c @OS_FREEBSD_TRUE@EXTRA_libsmputils1_la_SOURCES = \ @OS_FREEBSD_TRUE@ smp_dummy.c @OS_LINUX_TRUE@EXTRA_libsmputils1_la_SOURCES = \ @OS_LINUX_TRUE@ smp_dummy.c @OS_SOLARIS_TRUE@EXTRA_libsmputils1_la_SOURCES = \ @OS_SOLARIS_TRUE@ smp_dummy.c AM_CFLAGS = -I ../include -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -W # AM_CFLAGS = -I ../include -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -W -pedantic -std=c99 lib_LTLIBRARIES = libsmputils1.la libsmputils1_la_LDFLAGS = -version-info 1:0:0 libsmputils1_la_LIBADD = @os_libs@ all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu lib/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ } uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ done clean-libLTLIBRARIES: -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libsmputils1.la: $(libsmputils1_la_OBJECTS) $(libsmputils1_la_DEPENDENCIES) $(libsmputils1_la_LINK) -rpath $(libdir) $(libsmputils1_la_OBJECTS) $(libsmputils1_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_dummy.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_fre_cam.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_lib.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_lin_bsg.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_lin_sel.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_mptctl_io.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_sol_usmp.Plo@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) installdirs: for dir in "$(DESTDIR)$(libdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-libLTLIBRARIES install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-libLTLIBRARIES .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libLTLIBRARIES clean-libtool ctags distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am \ install-libLTLIBRARIES install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags uninstall uninstall-am uninstall-libLTLIBRARIES # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: smp_utils-0.97/lib/smp_mptctl_io.c0000664000175000017500000004421411646135217016264 0ustar douggdougg#define _GNU_SOURCE #include #include #include #include #include //#include #include #include #include #include #include #include #include #include #include // #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "mpi_type.h" #include "mpi.h" #include "mpi_sas.h" #include "smp_mptctl_glue.h" #include "smp_mptctl_io.h" #include "mptctl.h" #define REPLY_SIZE 128 typedef struct mpt_ioctl_command mpiIoctlBlk_t; #define MPT_DEV_MAJOR 10 #define MPT_DEV_MINOR 220 #define MPT2_DEV_MINOR 221 static const char null_sas_addr[8]; static int mptcommand = MPTCOMMAND; /* Part of interface to upper level. */ int chk_mpt_device(const char * dev_name, int verbose) { struct stat st; if (stat(dev_name, &st) < 0) { if (verbose) perror("chk_mpt_device: stat failed"); return 0; } if ((S_ISCHR(st.st_mode)) && (MPT_DEV_MAJOR == major(st.st_rdev))) { if ((MPT_DEV_MINOR == minor(st.st_rdev)) || (MPT2_DEV_MINOR == minor(st.st_rdev))) return 1; } if (verbose) { if (S_ISCHR(st.st_mode)) fprintf(stderr, "chk_mpt_device: wanted char device " "major,minor=%d,%d-%d\n got=%d,%d\n", MPT_DEV_MAJOR, MPT_DEV_MINOR, MPT2_DEV_MINOR, major(st.st_rdev), minor(st.st_rdev)); else fprintf(stderr, "chk_mpt_device: wanted char device " "major,minor=%d,%d-%d\n but didn't get char device\n", MPT_DEV_MAJOR, MPT_DEV_MINOR, MPT2_DEV_MINOR); } return 0; } /* Part of interface to upper level. */ int open_mpt_device(const char * dev_name, int verbose) { int res; struct stat st; res = open(dev_name, O_RDWR); if (res < 0) { if (verbose) perror("open_mpt_device failed"); } else if (fstat(res, &st) >= 0) { if ((S_ISCHR(st.st_mode)) && (MPT_DEV_MAJOR == major(st.st_rdev)) && (MPT2_DEV_MINOR == minor(st.st_rdev))) mptcommand = MPT2COMMAND; else mptcommand = MPTCOMMAND; } else if (verbose) perror("open_mpt_device: stat failed"); return res; } /* Part of interface to upper level. */ int close_mpt_device(int fd) { return close(fd); } /***************************************************************** * * * Copyright 2000-2002 LSI Logic. All rights reserved. * * * *****************************************************************/ #if 0 /* Function Prototypes */ void SmpTwoSGLsIoctl(int fd, int ioc_num); void SmpImmediateIoctl(int fd, int ioc_num); #endif /***************************************************************** * issueMptIoctl * * Generic command to issue the MPT command using the special * SDI_IOC | 0x01 Ioctl Function. *****************************************************************/ int issueMptCommand(int fd, int ioc_num, mpiIoctlBlk_t *mpiBlkPtr) { int status = -1; #if 0 int CmdBlkSize; CmdBlkSize = sizeof(mpiIoctlBlk_t) + ((mpiBlkPtr->dataSgeOffset)*4) + 8; ShowBuf("Command Block Before: ", mpiBlkPtr, CmdBlkSize, 0); #endif /* Set the IOC number prior to issuing this command. */ mpiBlkPtr->hdr.iocnum = ioc_num; mpiBlkPtr->hdr.port = 0; if (ioctl(fd, mptcommand, (char *) mpiBlkPtr) != 0) perror("MPTCOMMAND or MPT2COMMAND ioctl failed"); else { #if 0 MPIDefaultReply_t *pReply = NULL; /* Be smarter about dumping and using data. * If SCSI IO, reply may be null and data xfer * will be good. If a non-SCSI IO, if reply is * NULL data is definately garbage. * */ pReply = (MPIDefaultReply_t *) mpiBlkPtr->replyFrameBufPtr; if ((pReply) && (pReply->MsgLength > 0)) { // >>>>> pReply->IOCStatus = le16_to_cpu(pReply->IOCStatus); <<<< // ShowBuf("Reply Frame : ", pReply, pReply->MsgLength * 4, 0); status = pReply->IOCStatus & MPI_IOCSTATUS_MASK; } else #endif status = 0; } return status; } /* Part of interface to upper level. */ int send_req_mpt(int fd, int subvalue, const unsigned char * target_sa, struct smp_req_resp * rresp, int verbose) { mpiIoctlBlk_t * mpiBlkPtr = NULL; pSmpPassthroughRequest_t smpReq; pSmpPassthroughReply_t smpReply; uint numBytes; int k, status; char reply_m[1200]; u16 ioc_stat; unsigned char * ucp; int ret = -1; if (verbose && (0 == memcmp(target_sa, null_sas_addr, 8))) { fprintf(stderr, "The MPT interface typically needs SAS " "address of target (e.g. expander).\n"); fprintf(stderr, "A '--sa=SAS_ADDR' command line option " "may be required. See man page.\n"); } if (verbose > 2) { fprintf(stderr, "send_req_mpt: subvalue=%d ", subvalue); fprintf(stderr, "SAS address=0x"); for (k = 0; k < 8; ++k) fprintf(stderr, "%02x", target_sa[7 - k]); fprintf(stderr, "\n"); if (verbose > 3) fprintf(stderr, " mptctl two scatter gather list " "interface\n"); } numBytes = offsetof(SmpPassthroughRequest_t, SGL) + (2 * sizeof(SGESimple64_t)); mpiBlkPtr = malloc(sizeof(mpiIoctlBlk_t) + numBytes); if (mpiBlkPtr == NULL) goto err_out; memset(mpiBlkPtr, 0, sizeof(mpiIoctlBlk_t) + numBytes); mpiBlkPtr->replyFrameBufPtr = reply_m; memset(mpiBlkPtr->replyFrameBufPtr, 0, sizeof(reply_m)); mpiBlkPtr->maxReplyBytes = sizeof(reply_m); smpReq = (pSmpPassthroughRequest_t)mpiBlkPtr->MF; mpiBlkPtr->dataSgeOffset = offsetof(SmpPassthroughRequest_t, SGL) / 4; smpReply = (pSmpPassthroughReply_t)mpiBlkPtr->replyFrameBufPtr; /* send smp request */ mpiBlkPtr->dataOutSize = rresp->request_len - 4; mpiBlkPtr->dataOutBufPtr = (char *)rresp->request; mpiBlkPtr->dataInSize = rresp->max_response_len + 4; mpiBlkPtr->dataInBufPtr = malloc(mpiBlkPtr->dataInSize); if(mpiBlkPtr->dataInBufPtr == NULL) goto err_out; memset(mpiBlkPtr->dataInBufPtr, 0, mpiBlkPtr->dataInSize); /* Populate the SMP Request */ /* PassthroughFlags * Bit7: 0=two SGLs 1=Payload returned in Reply */ memset(smpReq, 0, sizeof(smpReq)); smpReq->RequestDataLength = rresp->request_len - 4; // <<<<<<<<<<<< ?? smpReq->Function = MPI_FUNCTION_SMP_PASSTHROUGH; ucp = (unsigned char *)&smpReq->SASAddress; memcpy(ucp, target_sa, 8); status = issueMptCommand(fd, subvalue, mpiBlkPtr); if (status != 0) { fprintf(stderr, "ioctl failed\n"); goto err_out; } ioc_stat = smpReply->IOCStatus & MPI_IOCSTATUS_MASK; if ((ioc_stat != MPI_IOCSTATUS_SUCCESS) || (smpReply->SASStatus != MPI_SASSTATUS_SUCCESS)) { if (verbose) { switch(smpReply->SASStatus) { case MPI_SASSTATUS_UNKNOWN_ERROR: fprintf(stderr, "Unknown SAS (SMP) error\n"); break; case MPI_SASSTATUS_INVALID_FRAME: fprintf(stderr, "Invalid frame\n"); break; case MPI_SASSTATUS_UTC_BAD_DEST: fprintf(stderr, "Unable to connect (bad " "destination)\n"); break; case MPI_SASSTATUS_UTC_BREAK_RECEIVED: fprintf(stderr, "Unable to connect (break " "received)\n"); break; case MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED: fprintf(stderr, "Unable to connect (connect " "rate not supported)\n"); break; case MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST: fprintf(stderr, "Unable to connect (port " "layer request)\n"); break; case MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED: fprintf(stderr, "Unable to connect (protocol " "(SMP target) not supported)\n"); break; case MPI_SASSTATUS_UTC_WRONG_DESTINATION: fprintf(stderr, "Unable to connect (wrong " "destination)\n"); break; case MPI_SASSTATUS_SHORT_INFORMATION_UNIT: fprintf(stderr, "Short information unit\n"); break; case MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH: fprintf(stderr, "Incorrect data length\n"); break; case MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT: fprintf(stderr, "Initiator response " "timeout\n"); break; default: if (smpReply->SASStatus != MPI_SASSTATUS_SUCCESS) { fprintf(stderr, "Unrecognized SAS " "(SMP) error 0x%x\n", smpReply->SASStatus); break; } if (smpReply->IOCStatus == MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED) fprintf(stderr, "SMP request failed " "(IOCStatus)\n"); else if (smpReply->IOCStatus == MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN) fprintf(stderr, "SMP data overrun " "(IOCStatus)\n"); else if (smpReply->IOCStatus == MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE) fprintf(stderr, "Device not there " "(IOCStatus)\n"); else fprintf(stderr, "IOCStatus=0x%x\n", smpReply->IOCStatus); } } if (verbose > 1) fprintf(stderr, "IOCStatus=0x%X IOCLogInfo=0x%X " "SASStatus=0x%X\n", smpReply->IOCStatus, smpReply->IOCLogInfo, smpReply->SASStatus); } else ret = 0; memcpy(rresp->response, mpiBlkPtr->dataInBufPtr, rresp->max_response_len); rresp->act_response_len = -1; err_out: if (mpiBlkPtr) { if (mpiBlkPtr->dataInBufPtr) free(mpiBlkPtr->dataInBufPtr); free(mpiBlkPtr); } return ret; } #if 0 /***************************************************************** * ConfigIoctl * *****************************************************************/ void SmpTwoSGLsIoctl(int fd, int ioc_num) { mpiIoctlBlk_t * mpiBlkPtr = NULL; pSmpPassthroughRequest_t smpReq; pSmpPassthroughReply_t smpReply; uint numBytes; int status; /* here is my hard coded expander sas address */ unsigned char expanderSasAddr[] = {0x9C,0x03,0x00,0x00,0x60,0x05,0x06,0x50}; /* here is a Request General */ unsigned char smp_request[] = {0x40, 0, 0, 0}; u16 ioc_stat; numBytes = offsetof(SmpPassthroughRequest_t, SGL) + (2 * sizeof(SGESimple64_t)); mpiBlkPtr = malloc(sizeof(mpiIoctlBlk_t) + numBytes); if (mpiBlkPtr == NULL) return; memset(mpiBlkPtr, 0, sizeof(mpiIoctlBlk_t) + numBytes); mpiBlkPtr->replyFrameBufPtr = malloc(REPLY_SIZE); if (mpiBlkPtr->replyFrameBufPtr == NULL) goto err_out; memset(mpiBlkPtr->replyFrameBufPtr, 0, REPLY_SIZE); smpReq = (pSmpPassthroughRequest_t)mpiBlkPtr->MF; mpiBlkPtr->dataSgeOffset = offsetof(SmpPassthroughRequest_t, SGL) / 4; smpReply = (pSmpPassthroughReply_t)mpiBlkPtr->replyFrameBufPtr; /* send smp request */ mpiBlkPtr->dataOutSize = sizeof(smp_request); mpiBlkPtr->dataOutBufPtr = malloc(mpiBlkPtr->dataOutSize); if (mpiBlkPtr->dataOutBufPtr == NULL) goto err_out; memcpy(mpiBlkPtr->dataOutBufPtr, smp_request, sizeof(smp_request)); mpiBlkPtr->dataInSize = 1020; mpiBlkPtr->dataInBufPtr = malloc(mpiBlkPtr->dataInSize); if(mpiBlkPtr->dataInBufPtr == NULL) goto err_out; memset(mpiBlkPtr->dataInBufPtr, 0, mpiBlkPtr->dataInSize); /* Populate the SMP Request */ /* PassthroughFlags * Bit7: 0=two SGLs 1=Payload returned in Reply */ memset(smpReq, 0, sizeof(smpReq)); smpReq->RequestDataLength = sizeof(smp_request); // <<<<<<<<<<<< ?? smpReq->Function = MPI_FUNCTION_SMP_PASSTHROUGH; memcpy(&smpReq->SASAddress, expanderSasAddr, 8); status = issueMptCommand(fd, ioc_num, mpiBlkPtr); if (status != 0) { printf("ioctl failed\n"); goto err_out; } ioc_stat = smpReply->IOCStatus & MPI_IOCSTATUS_MASK; if ((ioc_stat != MPI_IOCSTATUS_SUCCESS) && (ioc_stat != MPI_IOCSTATUS_SCSI_DATA_UNDERRUN)) { printf("IOCStatus=0x%X IOCLogInfo=0x%X SASStatus=0x%X\n", smpReply->IOCStatus, smpReply->IOCLogInfo, smpReply->SASStatus); }else{ printf("succeeded\n"); } ShowBuf("Data In: ", mpiBlkPtr->dataInBufPtr, mpiBlkPtr->dataInSize,1); err_out: if (mpiBlkPtr) { if (mpiBlkPtr->dataInBufPtr) free(mpiBlkPtr->dataInBufPtr); if (mpiBlkPtr->dataOutBufPtr) free(mpiBlkPtr->dataOutBufPtr); if (mpiBlkPtr->replyFrameBufPtr) free(mpiBlkPtr->replyFrameBufPtr); free(mpiBlkPtr); } return; } void SmpImmediateIoctl(int fd, int ioc_num) { mpiIoctlBlk_t * mpiBlkPtr = NULL; pSmpPassthroughRequest_t smpReq; pSmpPassthroughReply_t smpReply; uint numBytes; int status; /* here is my hard coded expander sas address */ unsigned char expanderSasAddr[] = {0x9C,0x03,0x00,0x00,0x60,0x05,0x06,0x50}; /* here is a Request General */ unsigned char smp_request[] = {0x40, 0, 0, 0}; u16 ioc_stat; numBytes = offsetof(SmpPassthroughRequest_t,SGL) + (sizeof(smp_request)); mpiBlkPtr = malloc(sizeof(mpiIoctlBlk_t) + numBytes); if (mpiBlkPtr == NULL) return; memset(mpiBlkPtr, 0, sizeof(mpiIoctlBlk_t) + numBytes); mpiBlkPtr->replyFrameBufPtr = malloc(REPLY_SIZE); if (mpiBlkPtr->replyFrameBufPtr == NULL) goto err_out; memset(mpiBlkPtr->replyFrameBufPtr, 0, REPLY_SIZE); smpReq = (pSmpPassthroughRequest_t)mpiBlkPtr->MF; mpiBlkPtr->dataSgeOffset = (offsetof(SmpPassthroughRequest_t,SGL) + sizeof(smp_request))/4; smpReply = (pSmpPassthroughReply_t)mpiBlkPtr->replyFrameBufPtr; /* Populate the SMP Request */ /* PassthroughFlags * Bit7: 0=two SGLs 1=Payload returned in Reply */ memset(smpReq, 0, sizeof(smpReq)); smpReq->PassthroughFlags = 1<<7; smpReq->Function = MPI_FUNCTION_SMP_PASSTHROUGH; smpReq->RequestDataLength = sizeof(smp_request); memcpy(&smpReq->SASAddress,expanderSasAddr,8); memcpy(&smpReq->SGL,smp_request,sizeof(smp_request)); status = issueMptCommand(fd, ioc_num, mpiBlkPtr); if (status != 0) { printf("ioctl failed\n"); goto err_out; } ioc_stat = smpReply->IOCStatus & MPI_IOCSTATUS_MASK; if ((ioc_stat != MPI_IOCSTATUS_SUCCESS) && (ioc_stat != MPI_IOCSTATUS_SCSI_DATA_UNDERRUN)) { printf("IOCStatus=0x%X IOCLogInfo=0x%X SASStatus=0x%X\n", smpReply->IOCStatus, smpReply->IOCLogInfo, smpReply->SASStatus); } else printf("succeeded\n"); ShowBuf("Data In: ", smpReply->ResponseData, smpReply->ResponseDataLength,1); err_out: if (mpiBlkPtr) { if (mpiBlkPtr->dataInBufPtr) free(mpiBlkPtr->dataInBufPtr); if (mpiBlkPtr->dataOutBufPtr) free(mpiBlkPtr->dataOutBufPtr); if (mpiBlkPtr->replyFrameBufPtr) free(mpiBlkPtr->replyFrameBufPtr); free(mpiBlkPtr); } return; } #endif smp_utils-0.97/lib/smp_sol_usmp.c0000664000175000017500000001104511617117536016131 0ustar douggdougg/* * Copyright (c) 2006-2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" #define I_USMP 1 #define DEF_USMP_TIMEOUT 60 /* seconds */ /* Difference between usmp.h header in openSolaris 2009 and usmp-7i.html * Oracle (dated 2010) */ #ifdef USMPCMD #define USMP_IO USMPCMD #else #define USMP_IO USMPFUNC #endif int smp_initiator_open(const char * device_name, int subvalue, const char * i_params, unsigned long long sa, struct smp_target_obj * tobj, int verbose) { int res, j; i_params = i_params; /* suppress warning */ if ((NULL == tobj) || (NULL == device_name)) return -1; memset(tobj, 0, sizeof(struct smp_target_obj)); strncpy(tobj->device_name, device_name, SMP_MAX_DEVICE_NAME); if (sa) { for (j = 0; j < 8; ++j, (sa >>= 8)) tobj->sas_addr[j] = (sa & 0xff); } tobj->interface_selector = I_USMP; if (I_USMP == tobj->interface_selector) { res = open(tobj->device_name, O_RDWR); if (res < 0) { perror("smp_initiator_open(usmp): open() failed"); if (verbose) fprintf(stderr, "tried to open %s\n", tobj->device_name); return -1; } tobj->fd = res; tobj->subvalue = subvalue; tobj->opened = 1; return 0; } else fprintf(stderr, "bad interface selector: %d\n", tobj->interface_selector); return -1; } int smp_send_req(const struct smp_target_obj * tobj, struct smp_req_resp * rresp, int verbose) { struct usmp_cmd urr; if ((NULL == tobj) || (0 == tobj->opened)) { if (verbose > 2) fprintf(stderr, "smp_send_req: nothing open??\n"); return -1; } if (I_USMP != tobj->interface_selector) { fprintf(stderr, "bad interface selector: %d\n", tobj->interface_selector); return -1; } memset(&urr, 0, sizeof(urr)); urr.usmp_req = rresp->request; urr.usmp_reqsize = rresp->request_len; /* header+payload+CRC in bytes */ urr.usmp_rsp = rresp->response; urr.usmp_rspsize = rresp->max_response_len; urr.usmp_timeout = DEF_USMP_TIMEOUT; if (ioctl(tobj->fd, USMP_IO, &urr) < 0) { perror("smp_send_req: ioctl(USMPCMD)"); return -1; } rresp->act_response_len = -1; rresp->transport_err = 0; return 0; } int smp_initiator_close(struct smp_target_obj * tobj) { int res; if ((NULL == tobj) || (0 == tobj->opened)) { fprintf(stderr, "smp_initiator_close(usmp): nothing open??\n"); return -1; } if (I_USMP != tobj->interface_selector) { fprintf(stderr, "bad interface selector: %d\n", tobj->interface_selector); return -1; } res = close(tobj->fd); if (res < 0) perror("smp_initiator_close(usmp): failed\n"); tobj->opened = 0; return 0; } smp_utils-0.97/lib/smp_dummy.c0000664000175000017500000000010511617030111015375 0ustar douggdougg/* Nothing here */ #ifdef HAVE_CONFIG_H #include "config.h" #endif smp_utils-0.97/lib/smp_mptctl_glue.h0000664000175000017500000000071211616767347016625 0ustar douggdougg#ifndef SMP_MPTCTL_GLUE_H #define SMP_MPTCTL_GLUE_H #ifndef __user #define __user #endif /* Typedefs */ #ifndef uint typedef unsigned int uint; #endif #ifndef ushort typedef unsigned short ushort; #endif #ifndef uchar typedef unsigned char uchar; #endif #ifndef u8 typedef unsigned char u8; #endif #ifndef u16 typedef unsigned short u16; #endif #ifndef u32 typedef unsigned int u32; #endif #ifndef u64 typedef unsigned long long u64; #endif #endif smp_utils-0.97/lib/mpi.h0000664000175000017500000010363411616767347014223 0ustar douggdougg/* * Copyright (c) 2000-2005 LSI Logic Corporation. * * * Name: mpi.h * Title: MPI Message independent structures and definitions * Creation Date: July 27, 2000 * * mpi.h Version: 01.05.10 * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 05-24-00 00.10.02 Added MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH definition. * 06-06-00 01.00.01 Update MPI_VERSION_MAJOR and MPI_VERSION_MINOR. * 06-22-00 01.00.02 Added MPI_IOCSTATUS_LAN_ definitions. * Removed LAN_SUSPEND function definition. * Added MPI_MSGFLAGS_CONTINUATION_REPLY definition. * 06-30-00 01.00.03 Added MPI_CONTEXT_REPLY_TYPE_LAN definition. * Added MPI_GET/SET_CONTEXT_REPLY_TYPE macros. * 07-27-00 01.00.04 Added MPI_FAULT_ definitions. * Removed MPI_IOCSTATUS_MSG/DATA_XFER_ERROR definitions. * Added MPI_IOCSTATUS_INTERNAL_ERROR definition. * Added MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH. * 11-02-00 01.01.01 Original release for post 1.0 work. * 12-04-00 01.01.02 Added new function codes. * 01-09-01 01.01.03 Added more definitions to the system interface section * Added MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT. * 01-25-01 01.01.04 Changed MPI_VERSION_MINOR from 0x00 to 0x01. * 02-20-01 01.01.05 Started using MPI_POINTER. * Fixed value for MPI_DIAG_RW_ENABLE. * Added defines for MPI_DIAG_PREVENT_IOC_BOOT and * MPI_DIAG_CLEAR_FLASH_BAD_SIG. * Obsoleted MPI_IOCSTATUS_TARGET_FC_ defines. * 02-27-01 01.01.06 Removed MPI_HOST_INDEX_REGISTER define. * Added function codes for RAID. * 04-09-01 01.01.07 Added alternate define for MPI_DOORBELL_ACTIVE, * MPI_DOORBELL_USED, to better match the spec. * 08-08-01 01.02.01 Original release for v1.2 work. * Changed MPI_VERSION_MINOR from 0x01 to 0x02. * Added define MPI_FUNCTION_TOOLBOX. * 09-28-01 01.02.02 New function code MPI_SCSI_ENCLOSURE_PROCESSOR. * 11-01-01 01.02.03 Changed name to MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR. * 03-14-02 01.02.04 Added MPI_HEADER_VERSION_ defines. * 05-31-02 01.02.05 Bumped MPI_HEADER_VERSION_UNIT. * 07-12-02 01.02.06 Added define for MPI_FUNCTION_MAILBOX. * 09-16-02 01.02.07 Bumped value for MPI_HEADER_VERSION_UNIT. * 11-15-02 01.02.08 Added define MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX and * obsoleted define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX. * 04-01-03 01.02.09 New IOCStatus code: MPI_IOCSTATUS_FC_EXCHANGE_CANCELED * 06-26-03 01.02.10 Bumped MPI_HEADER_VERSION_UNIT value. * 01-16-04 01.02.11 Added define for MPI_IOCLOGINFO_TYPE_SHIFT. * 04-29-04 01.02.12 Added function codes for MPI_FUNCTION_DIAG_BUFFER_POST * and MPI_FUNCTION_DIAG_RELEASE. * Added MPI_IOCSTATUS_DIAGNOSTIC_RELEASED define. * Bumped MPI_HEADER_VERSION_UNIT value. * 05-11-04 01.03.01 Bumped MPI_VERSION_MINOR for MPI v1.3. * Added codes for Inband. * 08-19-04 01.05.01 Added defines for Host Buffer Access Control doorbell. * Added define for offset of High Priority Request Queue. * Added new function codes and new IOCStatus codes. * Added a IOCLogInfo type of SAS. * 12-07-04 01.05.02 Bumped MPI_HEADER_VERSION_UNIT. * 12-09-04 01.05.03 Bumped MPI_HEADER_VERSION_UNIT. * 01-15-05 01.05.04 Bumped MPI_HEADER_VERSION_UNIT. * 02-09-05 01.05.05 Bumped MPI_HEADER_VERSION_UNIT. * 02-22-05 01.05.06 Bumped MPI_HEADER_VERSION_UNIT. * 03-11-05 01.05.07 Removed function codes for SCSI IO 32 and * TargetAssistExtended requests. * Removed EEDP IOCStatus codes. * 06-24-05 01.05.08 Added function codes for SCSI IO 32 and * TargetAssistExtended requests. * Added EEDP IOCStatus codes. * 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT. * 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target. * -------------------------------------------------------------------------- */ #ifndef MPI_H #define MPI_H /***************************************************************************** * * M P I V e r s i o n D e f i n i t i o n s * *****************************************************************************/ #define MPI_VERSION_MAJOR (0x01) #define MPI_VERSION_MINOR (0x05) #define MPI_VERSION_MAJOR_MASK (0xFF00) #define MPI_VERSION_MAJOR_SHIFT (8) #define MPI_VERSION_MINOR_MASK (0x00FF) #define MPI_VERSION_MINOR_SHIFT (0) #define MPI_VERSION ((MPI_VERSION_MAJOR << MPI_VERSION_MAJOR_SHIFT) | \ MPI_VERSION_MINOR) #define MPI_VERSION_01_00 (0x0100) #define MPI_VERSION_01_01 (0x0101) #define MPI_VERSION_01_02 (0x0102) #define MPI_VERSION_01_03 (0x0103) #define MPI_VERSION_01_05 (0x0105) /* Note: The major versions of 0xe0 through 0xff are reserved */ /* versioning for this MPI header set */ #define MPI_HEADER_VERSION_UNIT (0x0C) #define MPI_HEADER_VERSION_DEV (0x00) #define MPI_HEADER_VERSION_UNIT_MASK (0xFF00) #define MPI_HEADER_VERSION_UNIT_SHIFT (8) #define MPI_HEADER_VERSION_DEV_MASK (0x00FF) #define MPI_HEADER_VERSION_DEV_SHIFT (0) #define MPI_HEADER_VERSION ((MPI_HEADER_VERSION_UNIT << 8) | MPI_HEADER_VERSION_DEV) /***************************************************************************** * * I O C S t a t e D e f i n i t i o n s * *****************************************************************************/ #define MPI_IOC_STATE_RESET (0x00000000) #define MPI_IOC_STATE_READY (0x10000000) #define MPI_IOC_STATE_OPERATIONAL (0x20000000) #define MPI_IOC_STATE_FAULT (0x40000000) #define MPI_IOC_STATE_MASK (0xF0000000) #define MPI_IOC_STATE_SHIFT (28) /* Fault state codes (product independent range 0x8000-0xFFFF) */ #define MPI_FAULT_REQUEST_MESSAGE_PCI_PARITY_ERROR (0x8111) #define MPI_FAULT_REQUEST_MESSAGE_PCI_BUS_FAULT (0x8112) #define MPI_FAULT_REPLY_MESSAGE_PCI_PARITY_ERROR (0x8113) #define MPI_FAULT_REPLY_MESSAGE_PCI_BUS_FAULT (0x8114) #define MPI_FAULT_DATA_SEND_PCI_PARITY_ERROR (0x8115) #define MPI_FAULT_DATA_SEND_PCI_BUS_FAULT (0x8116) #define MPI_FAULT_DATA_RECEIVE_PCI_PARITY_ERROR (0x8117) #define MPI_FAULT_DATA_RECEIVE_PCI_BUS_FAULT (0x8118) /***************************************************************************** * * P C I S y s t e m I n t e r f a c e R e g i s t e r s * *****************************************************************************/ /* * Defines for working with the System Doorbell register. * Values for doorbell function codes are included in the section that defines * all the function codes (further on in this file). */ #define MPI_DOORBELL_OFFSET (0x00000000) #define MPI_DOORBELL_ACTIVE (0x08000000) /* DoorbellUsed */ #define MPI_DOORBELL_USED (MPI_DOORBELL_ACTIVE) #define MPI_DOORBELL_ACTIVE_SHIFT (27) #define MPI_DOORBELL_WHO_INIT_MASK (0x07000000) #define MPI_DOORBELL_WHO_INIT_SHIFT (24) #define MPI_DOORBELL_FUNCTION_MASK (0xFF000000) #define MPI_DOORBELL_FUNCTION_SHIFT (24) #define MPI_DOORBELL_ADD_DWORDS_MASK (0x00FF0000) #define MPI_DOORBELL_ADD_DWORDS_SHIFT (16) #define MPI_DOORBELL_DATA_MASK (0x0000FFFF) #define MPI_DOORBELL_FUNCTION_SPECIFIC_MASK (0x0000FFFF) /* values for Host Buffer Access Control doorbell function */ #define MPI_DB_HPBAC_VALUE_MASK (0x0000F000) #define MPI_DB_HPBAC_ENABLE_ACCESS (0x01) #define MPI_DB_HPBAC_DISABLE_ACCESS (0x02) #define MPI_DB_HPBAC_FREE_BUFFER (0x03) #define MPI_WRITE_SEQUENCE_OFFSET (0x00000004) #define MPI_WRSEQ_KEY_VALUE_MASK (0x0000000F) #define MPI_WRSEQ_1ST_KEY_VALUE (0x04) #define MPI_WRSEQ_2ND_KEY_VALUE (0x0B) #define MPI_WRSEQ_3RD_KEY_VALUE (0x02) #define MPI_WRSEQ_4TH_KEY_VALUE (0x07) #define MPI_WRSEQ_5TH_KEY_VALUE (0x0D) #define MPI_DIAGNOSTIC_OFFSET (0x00000008) #define MPI_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400) #define MPI_DIAG_PREVENT_IOC_BOOT (0x00000200) #define MPI_DIAG_DRWE (0x00000080) #define MPI_DIAG_FLASH_BAD_SIG (0x00000040) #define MPI_DIAG_RESET_HISTORY (0x00000020) #define MPI_DIAG_RW_ENABLE (0x00000010) #define MPI_DIAG_RESET_ADAPTER (0x00000004) #define MPI_DIAG_DISABLE_ARM (0x00000002) #define MPI_DIAG_MEM_ENABLE (0x00000001) #define MPI_TEST_BASE_ADDRESS_OFFSET (0x0000000C) #define MPI_DIAG_RW_DATA_OFFSET (0x00000010) #define MPI_DIAG_RW_ADDRESS_OFFSET (0x00000014) #define MPI_HOST_INTERRUPT_STATUS_OFFSET (0x00000030) #define MPI_HIS_IOP_DOORBELL_STATUS (0x80000000) #define MPI_HIS_REPLY_MESSAGE_INTERRUPT (0x00000008) #define MPI_HIS_DOORBELL_INTERRUPT (0x00000001) #define MPI_HOST_INTERRUPT_MASK_OFFSET (0x00000034) #define MPI_HIM_RIM (0x00000008) #define MPI_HIM_DIM (0x00000001) #define MPI_REQUEST_QUEUE_OFFSET (0x00000040) #define MPI_REQUEST_POST_FIFO_OFFSET (0x00000040) #define MPI_REPLY_QUEUE_OFFSET (0x00000044) #define MPI_REPLY_POST_FIFO_OFFSET (0x00000044) #define MPI_REPLY_FREE_FIFO_OFFSET (0x00000044) #define MPI_HI_PRI_REQUEST_QUEUE_OFFSET (0x00000048) /***************************************************************************** * * M e s s a g e F r a m e D e s c r i p t o r s * *****************************************************************************/ #define MPI_REQ_MF_DESCRIPTOR_NB_MASK (0x00000003) #define MPI_REQ_MF_DESCRIPTOR_F_BIT (0x00000004) #define MPI_REQ_MF_DESCRIPTOR_ADDRESS_MASK (0xFFFFFFF8) #define MPI_ADDRESS_REPLY_A_BIT (0x80000000) #define MPI_ADDRESS_REPLY_ADDRESS_MASK (0x7FFFFFFF) #define MPI_CONTEXT_REPLY_A_BIT (0x80000000) #define MPI_CONTEXT_REPLY_TYPE_MASK (0x60000000) #define MPI_CONTEXT_REPLY_TYPE_SCSI_INIT (0x00) #define MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET (0x01) #define MPI_CONTEXT_REPLY_TYPE_LAN (0x02) #define MPI_CONTEXT_REPLY_TYPE_SHIFT (29) #define MPI_CONTEXT_REPLY_CONTEXT_MASK (0x1FFFFFFF) /****************************************************************************/ /* Context Reply macros */ /****************************************************************************/ #define MPI_GET_CONTEXT_REPLY_TYPE(x) (((x) & MPI_CONTEXT_REPLY_TYPE_MASK) \ >> MPI_CONTEXT_REPLY_TYPE_SHIFT) #define MPI_SET_CONTEXT_REPLY_TYPE(x, typ) \ ((x) = ((x) & ~MPI_CONTEXT_REPLY_TYPE_MASK) | \ (((typ) << MPI_CONTEXT_REPLY_TYPE_SHIFT) & \ MPI_CONTEXT_REPLY_TYPE_MASK)) /***************************************************************************** * * M e s s a g e F u n c t i o n s * 0x80 -> 0x8F reserved for private message use per product * * *****************************************************************************/ #define MPI_FUNCTION_SCSI_IO_REQUEST (0x00) #define MPI_FUNCTION_SCSI_TASK_MGMT (0x01) #define MPI_FUNCTION_IOC_INIT (0x02) #define MPI_FUNCTION_IOC_FACTS (0x03) #define MPI_FUNCTION_CONFIG (0x04) #define MPI_FUNCTION_PORT_FACTS (0x05) #define MPI_FUNCTION_PORT_ENABLE (0x06) #define MPI_FUNCTION_EVENT_NOTIFICATION (0x07) #define MPI_FUNCTION_EVENT_ACK (0x08) #define MPI_FUNCTION_FW_DOWNLOAD (0x09) #define MPI_FUNCTION_TARGET_CMD_BUFFER_POST (0x0A) #define MPI_FUNCTION_TARGET_ASSIST (0x0B) #define MPI_FUNCTION_TARGET_STATUS_SEND (0x0C) #define MPI_FUNCTION_TARGET_MODE_ABORT (0x0D) #define MPI_FUNCTION_FC_LINK_SRVC_BUF_POST (0x0E) #define MPI_FUNCTION_FC_LINK_SRVC_RSP (0x0F) #define MPI_FUNCTION_FC_EX_LINK_SRVC_SEND (0x10) #define MPI_FUNCTION_FC_ABORT (0x11) #define MPI_FUNCTION_FW_UPLOAD (0x12) #define MPI_FUNCTION_FC_COMMON_TRANSPORT_SEND (0x13) #define MPI_FUNCTION_FC_PRIMITIVE_SEND (0x14) #define MPI_FUNCTION_RAID_ACTION (0x15) #define MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH (0x16) #define MPI_FUNCTION_TOOLBOX (0x17) #define MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18) #define MPI_FUNCTION_MAILBOX (0x19) #define MPI_FUNCTION_SMP_PASSTHROUGH (0x1A) #define MPI_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B) #define MPI_FUNCTION_SATA_PASSTHROUGH (0x1C) #define MPI_FUNCTION_DIAG_BUFFER_POST (0x1D) #define MPI_FUNCTION_DIAG_RELEASE (0x1E) #define MPI_FUNCTION_SCSI_IO_32 (0x1F) #define MPI_FUNCTION_LAN_SEND (0x20) #define MPI_FUNCTION_LAN_RECEIVE (0x21) #define MPI_FUNCTION_LAN_RESET (0x22) #define MPI_FUNCTION_TARGET_ASSIST_EXTENDED (0x23) #define MPI_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24) #define MPI_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25) #define MPI_FUNCTION_INBAND_BUFFER_POST (0x28) #define MPI_FUNCTION_INBAND_SEND (0x29) #define MPI_FUNCTION_INBAND_RSP (0x2A) #define MPI_FUNCTION_INBAND_ABORT (0x2B) #define MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40) #define MPI_FUNCTION_IO_UNIT_RESET (0x41) #define MPI_FUNCTION_HANDSHAKE (0x42) #define MPI_FUNCTION_REPLY_FRAME_REMOVAL (0x43) #define MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL (0x44) /* standard version format */ typedef struct _MPI_VERSION_STRUCT { U8 Dev; /* 00h */ U8 Unit; /* 01h */ U8 Minor; /* 02h */ U8 Major; /* 03h */ } MPI_VERSION_STRUCT, MPI_POINTER PTR_MPI_VERSION_STRUCT, MpiVersionStruct_t, MPI_POINTER pMpiVersionStruct; typedef union _MPI_VERSION_FORMAT { MPI_VERSION_STRUCT Struct; U32 Word; } MPI_VERSION_FORMAT, MPI_POINTER PTR_MPI_VERSION_FORMAT, MpiVersionFormat_t, MPI_POINTER pMpiVersionFormat_t; /***************************************************************************** * * S c a t t e r G a t h e r E l e m e n t s * *****************************************************************************/ /****************************************************************************/ /* Simple element structures */ /****************************************************************************/ typedef struct _SGE_SIMPLE32 { U32 FlagsLength; U32 Address; } SGE_SIMPLE32, MPI_POINTER PTR_SGE_SIMPLE32, SGESimple32_t, MPI_POINTER pSGESimple32_t; typedef struct _SGE_SIMPLE64 { U32 FlagsLength; U64 Address; } SGE_SIMPLE64, MPI_POINTER PTR_SGE_SIMPLE64, SGESimple64_t, MPI_POINTER pSGESimple64_t; typedef struct _SGE_SIMPLE_UNION { U32 FlagsLength; union { U32 Address32; U64 Address64; }u; } SGE_SIMPLE_UNION, MPI_POINTER PTR_SGE_SIMPLE_UNION, SGESimpleUnion_t, MPI_POINTER pSGESimpleUnion_t; /****************************************************************************/ /* Chain element structures */ /****************************************************************************/ typedef struct _SGE_CHAIN32 { U16 Length; U8 NextChainOffset; U8 Flags; U32 Address; } SGE_CHAIN32, MPI_POINTER PTR_SGE_CHAIN32, SGEChain32_t, MPI_POINTER pSGEChain32_t; typedef struct _SGE_CHAIN64 { U16 Length; U8 NextChainOffset; U8 Flags; U64 Address; } SGE_CHAIN64, MPI_POINTER PTR_SGE_CHAIN64, SGEChain64_t, MPI_POINTER pSGEChain64_t; typedef struct _SGE_CHAIN_UNION { U16 Length; U8 NextChainOffset; U8 Flags; union { U32 Address32; U64 Address64; }u; } SGE_CHAIN_UNION, MPI_POINTER PTR_SGE_CHAIN_UNION, SGEChainUnion_t, MPI_POINTER pSGEChainUnion_t; /****************************************************************************/ /* Transaction Context element */ /****************************************************************************/ typedef struct _SGE_TRANSACTION32 { U8 Reserved; U8 ContextSize; U8 DetailsLength; U8 Flags; U32 TransactionContext[1]; U32 TransactionDetails[1]; } SGE_TRANSACTION32, MPI_POINTER PTR_SGE_TRANSACTION32, SGETransaction32_t, MPI_POINTER pSGETransaction32_t; typedef struct _SGE_TRANSACTION64 { U8 Reserved; U8 ContextSize; U8 DetailsLength; U8 Flags; U32 TransactionContext[2]; U32 TransactionDetails[1]; } SGE_TRANSACTION64, MPI_POINTER PTR_SGE_TRANSACTION64, SGETransaction64_t, MPI_POINTER pSGETransaction64_t; typedef struct _SGE_TRANSACTION96 { U8 Reserved; U8 ContextSize; U8 DetailsLength; U8 Flags; U32 TransactionContext[3]; U32 TransactionDetails[1]; } SGE_TRANSACTION96, MPI_POINTER PTR_SGE_TRANSACTION96, SGETransaction96_t, MPI_POINTER pSGETransaction96_t; typedef struct _SGE_TRANSACTION128 { U8 Reserved; U8 ContextSize; U8 DetailsLength; U8 Flags; U32 TransactionContext[4]; U32 TransactionDetails[1]; } SGE_TRANSACTION128, MPI_POINTER PTR_SGE_TRANSACTION128, SGETransaction_t128, MPI_POINTER pSGETransaction_t128; typedef struct _SGE_TRANSACTION_UNION { U8 Reserved; U8 ContextSize; U8 DetailsLength; U8 Flags; union { U32 TransactionContext32[1]; U32 TransactionContext64[2]; U32 TransactionContext96[3]; U32 TransactionContext128[4]; }u; U32 TransactionDetails[1]; } SGE_TRANSACTION_UNION, MPI_POINTER PTR_SGE_TRANSACTION_UNION, SGETransactionUnion_t, MPI_POINTER pSGETransactionUnion_t; /****************************************************************************/ /* SGE IO types union for IO SGL's */ /****************************************************************************/ typedef struct _SGE_IO_UNION { union { SGE_SIMPLE_UNION Simple; SGE_CHAIN_UNION Chain; } u; } SGE_IO_UNION, MPI_POINTER PTR_SGE_IO_UNION, SGEIOUnion_t, MPI_POINTER pSGEIOUnion_t; /****************************************************************************/ /* SGE union for SGL's with Simple and Transaction elements */ /****************************************************************************/ typedef struct _SGE_TRANS_SIMPLE_UNION { union { SGE_SIMPLE_UNION Simple; SGE_TRANSACTION_UNION Transaction; } u; } SGE_TRANS_SIMPLE_UNION, MPI_POINTER PTR_SGE_TRANS_SIMPLE_UNION, SGETransSimpleUnion_t, MPI_POINTER pSGETransSimpleUnion_t; /****************************************************************************/ /* All SGE types union */ /****************************************************************************/ typedef struct _SGE_MPI_UNION { union { SGE_SIMPLE_UNION Simple; SGE_CHAIN_UNION Chain; SGE_TRANSACTION_UNION Transaction; } u; } SGE_MPI_UNION, MPI_POINTER PTR_SGE_MPI_UNION, MPI_SGE_UNION_t, MPI_POINTER pMPI_SGE_UNION_t, SGEAllUnion_t, MPI_POINTER pSGEAllUnion_t; /****************************************************************************/ /* SGE field definition and masks */ /****************************************************************************/ /* Flags field bit definitions */ #define MPI_SGE_FLAGS_LAST_ELEMENT (0x80) #define MPI_SGE_FLAGS_END_OF_BUFFER (0x40) #define MPI_SGE_FLAGS_ELEMENT_TYPE_MASK (0x30) #define MPI_SGE_FLAGS_LOCAL_ADDRESS (0x08) #define MPI_SGE_FLAGS_DIRECTION (0x04) #define MPI_SGE_FLAGS_ADDRESS_SIZE (0x02) #define MPI_SGE_FLAGS_END_OF_LIST (0x01) #define MPI_SGE_FLAGS_SHIFT (24) #define MPI_SGE_LENGTH_MASK (0x00FFFFFF) #define MPI_SGE_CHAIN_LENGTH_MASK (0x0000FFFF) /* Element Type */ #define MPI_SGE_FLAGS_TRANSACTION_ELEMENT (0x00) #define MPI_SGE_FLAGS_SIMPLE_ELEMENT (0x10) #define MPI_SGE_FLAGS_CHAIN_ELEMENT (0x30) #define MPI_SGE_FLAGS_ELEMENT_MASK (0x30) /* Address location */ #define MPI_SGE_FLAGS_SYSTEM_ADDRESS (0x00) /* Direction */ #define MPI_SGE_FLAGS_IOC_TO_HOST (0x00) #define MPI_SGE_FLAGS_HOST_TO_IOC (0x04) /* Address Size */ #define MPI_SGE_FLAGS_32_BIT_ADDRESSING (0x00) #define MPI_SGE_FLAGS_64_BIT_ADDRESSING (0x02) /* Context Size */ #define MPI_SGE_FLAGS_32_BIT_CONTEXT (0x00) #define MPI_SGE_FLAGS_64_BIT_CONTEXT (0x02) #define MPI_SGE_FLAGS_96_BIT_CONTEXT (0x04) #define MPI_SGE_FLAGS_128_BIT_CONTEXT (0x06) #define MPI_SGE_CHAIN_OFFSET_MASK (0x00FF0000) #define MPI_SGE_CHAIN_OFFSET_SHIFT (16) /****************************************************************************/ /* SGE operation Macros */ /****************************************************************************/ /* SIMPLE FlagsLength manipulations... */ #define MPI_SGE_SET_FLAGS(f) ((U32)(f) << MPI_SGE_FLAGS_SHIFT) #define MPI_SGE_GET_FLAGS(fl) (((fl) & ~MPI_SGE_LENGTH_MASK) >> MPI_SGE_FLAGS_SHIFT) #define MPI_SGE_LENGTH(fl) ((fl) & MPI_SGE_LENGTH_MASK) #define MPI_SGE_CHAIN_LENGTH(fl) ((fl) & MPI_SGE_CHAIN_LENGTH_MASK) #define MPI_SGE_SET_FLAGS_LENGTH(f,l) (MPI_SGE_SET_FLAGS(f) | MPI_SGE_LENGTH(l)) #define MPI_pSGE_GET_FLAGS(psg) MPI_SGE_GET_FLAGS((psg)->FlagsLength) #define MPI_pSGE_GET_LENGTH(psg) MPI_SGE_LENGTH((psg)->FlagsLength) #define MPI_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI_SGE_SET_FLAGS_LENGTH(f,l) /* CAUTION - The following are READ-MODIFY-WRITE! */ #define MPI_pSGE_SET_FLAGS(psg,f) (psg)->FlagsLength |= MPI_SGE_SET_FLAGS(f) #define MPI_pSGE_SET_LENGTH(psg,l) (psg)->FlagsLength |= MPI_SGE_LENGTH(l) #define MPI_GET_CHAIN_OFFSET(x) ((x&MPI_SGE_CHAIN_OFFSET_MASK)>>MPI_SGE_CHAIN_OFFSET_SHIFT) /***************************************************************************** * * S t a n d a r d M e s s a g e S t r u c t u r e s * *****************************************************************************/ /****************************************************************************/ /* Standard message request header for all request messages */ /****************************************************************************/ typedef struct _MSG_REQUEST_HEADER { U8 Reserved[2]; /* function specific */ U8 ChainOffset; U8 Function; U8 Reserved1[3]; /* function specific */ U8 MsgFlags; U32 MsgContext; } MSG_REQUEST_HEADER, MPI_POINTER PTR_MSG_REQUEST_HEADER, MPIHeader_t, MPI_POINTER pMPIHeader_t; /****************************************************************************/ /* Default Reply */ /****************************************************************************/ typedef struct _MSG_DEFAULT_REPLY { U8 Reserved[2]; /* function specific */ U8 MsgLength; U8 Function; U8 Reserved1[3]; /* function specific */ U8 MsgFlags; U32 MsgContext; U8 Reserved2[2]; /* function specific */ U16 IOCStatus; U32 IOCLogInfo; } MSG_DEFAULT_REPLY, MPI_POINTER PTR_MSG_DEFAULT_REPLY, MPIDefaultReply_t, MPI_POINTER pMPIDefaultReply_t; /* MsgFlags definition for all replies */ #define MPI_MSGFLAGS_CONTINUATION_REPLY (0x80) /***************************************************************************** * * I O C S t a t u s V a l u e s * *****************************************************************************/ /****************************************************************************/ /* Common IOCStatus values for all replies */ /****************************************************************************/ #define MPI_IOCSTATUS_SUCCESS (0x0000) #define MPI_IOCSTATUS_INVALID_FUNCTION (0x0001) #define MPI_IOCSTATUS_BUSY (0x0002) #define MPI_IOCSTATUS_INVALID_SGL (0x0003) #define MPI_IOCSTATUS_INTERNAL_ERROR (0x0004) #define MPI_IOCSTATUS_RESERVED (0x0005) #define MPI_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006) #define MPI_IOCSTATUS_INVALID_FIELD (0x0007) #define MPI_IOCSTATUS_INVALID_STATE (0x0008) #define MPI_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009) /****************************************************************************/ /* Config IOCStatus values */ /****************************************************************************/ #define MPI_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020) #define MPI_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021) #define MPI_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022) #define MPI_IOCSTATUS_CONFIG_INVALID_DATA (0x0023) #define MPI_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024) #define MPI_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025) /****************************************************************************/ /* SCSIIO Reply (SPI & FCP) initiator values */ /****************************************************************************/ #define MPI_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040) #define MPI_IOCSTATUS_SCSI_INVALID_BUS (0x0041) #define MPI_IOCSTATUS_SCSI_INVALID_TARGETID (0x0042) #define MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043) #define MPI_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044) #define MPI_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045) #define MPI_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046) #define MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047) #define MPI_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048) #define MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049) #define MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A) #define MPI_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B) #define MPI_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C) /****************************************************************************/ /* For use by SCSI Initiator and SCSI Target end-to-end data protection */ /****************************************************************************/ #define MPI_IOCSTATUS_EEDP_GUARD_ERROR (0x004D) #define MPI_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004E) #define MPI_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F) /****************************************************************************/ /* SCSI Target values */ /****************************************************************************/ #define MPI_IOCSTATUS_TARGET_PRIORITY_IO (0x0060) #define MPI_IOCSTATUS_TARGET_INVALID_PORT (0x0061) #define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX (0x0062) /* obsolete name */ #define MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062) #define MPI_IOCSTATUS_TARGET_ABORTED (0x0063) #define MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064) #define MPI_IOCSTATUS_TARGET_NO_CONNECTION (0x0065) #define MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A) #define MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT (0x006B) #define MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D) #define MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E) #define MPI_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F) #define MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070) #define MPI_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071) /****************************************************************************/ /* Additional FCP target values (obsolete) */ /****************************************************************************/ #define MPI_IOCSTATUS_TARGET_FC_ABORTED (0x0066) /* obsolete */ #define MPI_IOCSTATUS_TARGET_FC_RX_ID_INVALID (0x0067) /* obsolete */ #define MPI_IOCSTATUS_TARGET_FC_DID_INVALID (0x0068) /* obsolete */ #define MPI_IOCSTATUS_TARGET_FC_NODE_LOGGED_OUT (0x0069) /* obsolete */ /****************************************************************************/ /* Fibre Channel Direct Access values */ /****************************************************************************/ #define MPI_IOCSTATUS_FC_ABORTED (0x0066) #define MPI_IOCSTATUS_FC_RX_ID_INVALID (0x0067) #define MPI_IOCSTATUS_FC_DID_INVALID (0x0068) #define MPI_IOCSTATUS_FC_NODE_LOGGED_OUT (0x0069) #define MPI_IOCSTATUS_FC_EXCHANGE_CANCELED (0x006C) /****************************************************************************/ /* LAN values */ /****************************************************************************/ #define MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND (0x0080) #define MPI_IOCSTATUS_LAN_DEVICE_FAILURE (0x0081) #define MPI_IOCSTATUS_LAN_TRANSMIT_ERROR (0x0082) #define MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED (0x0083) #define MPI_IOCSTATUS_LAN_RECEIVE_ERROR (0x0084) #define MPI_IOCSTATUS_LAN_RECEIVE_ABORTED (0x0085) #define MPI_IOCSTATUS_LAN_PARTIAL_PACKET (0x0086) #define MPI_IOCSTATUS_LAN_CANCELED (0x0087) /****************************************************************************/ /* Serial Attached SCSI values */ /****************************************************************************/ #define MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090) #define MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091) /****************************************************************************/ /* Inband values */ /****************************************************************************/ #define MPI_IOCSTATUS_INBAND_ABORTED (0x0098) #define MPI_IOCSTATUS_INBAND_NO_CONNECTION (0x0099) /****************************************************************************/ /* Diagnostic Tools values */ /****************************************************************************/ #define MPI_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0) /****************************************************************************/ /* IOCStatus flag to indicate that log info is available */ /****************************************************************************/ #define MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000) #define MPI_IOCSTATUS_MASK (0x7FFF) /****************************************************************************/ /* LogInfo Types */ /****************************************************************************/ #define MPI_IOCLOGINFO_TYPE_MASK (0xF0000000) #define MPI_IOCLOGINFO_TYPE_SHIFT (28) #define MPI_IOCLOGINFO_TYPE_NONE (0x0) #define MPI_IOCLOGINFO_TYPE_SCSI (0x1) #define MPI_IOCLOGINFO_TYPE_FC (0x2) #define MPI_IOCLOGINFO_TYPE_SAS (0x3) #define MPI_IOCLOGINFO_TYPE_ISCSI (0x4) #define MPI_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF) #endif smp_utils-0.97/lib/mptctl.h0000664000175000017500000004273111616767347014741 0ustar douggdougg/* * linux/drivers/message/fusion/mptioctl.h * Fusion MPT misc device (ioctl) driver. * For use with PCI chip/adapter(s): * LSIFC9xx/LSI409xx Fibre Channel * running LSI Logic Fusion MPT (Message Passing Technology) firmware. * * Copyright (c) 1999-2005 LSI Logic Corporation * (mailto:mpt_linux_developer@lsil.com) * * $Id: mptctl.h,v 1.14 2003/03/18 22:49:51 Exp $ */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; version 2 of the License. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. NO WARRANTY THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is solely responsible for determining the appropriateness of using and distributing the Program and assumes all risks associated with its exercise of rights under this Agreement, including but not limited to the risks and costs of program errors, damage to or loss of data, programs or equipment, and unavailability or interruption of operations. DISCLAIMER OF LIABILITY NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef MPTCTL_H_INCLUDED #define MPTCTL_H_INCLUDED /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ // #include "linux/version.h" /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * */ #define MPT_MISCDEV_BASENAME "mptctl" #define MPT_MISCDEV_PATHNAME "/dev/" MPT_MISCDEV_BASENAME #define MPT_CSMI_DESCRIPTION "LSI Logic Corporation: Fusion MPT Driver "MPT_LINUX_VERSION_COMMON #define MPT_PRODUCT_LENGTH 12 /* * Generic MPT Control IOCTLs and structures */ #define MPT_MAGIC_NUMBER 'm' #define MPTRWPERF _IOWR(MPT_MAGIC_NUMBER,0,struct mpt_raw_r_w) #define MPTFWDOWNLOAD _IOWR(MPT_MAGIC_NUMBER,15,struct mpt_fw_xfer) #define MPTFWDOWNLOADBOOT _IOWR(MPT_MAGIC_NUMBER,16,struct mpt_fw_xfer) #define MPTCOMMAND _IOWR(MPT_MAGIC_NUMBER,20,struct mpt_ioctl_command) #if defined(__KERNEL__) && defined(CONFIG_COMPAT) #define MPTFWDOWNLOAD32 _IOWR(MPT_MAGIC_NUMBER,15,struct mpt_fw_xfer32) #define MPTCOMMAND32 _IOWR(MPT_MAGIC_NUMBER,20,struct mpt_ioctl_command32) #endif #define MPTIOCINFO _IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo) #define MPTIOCINFO1 _IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo_rev0) #define MPTIOCINFO2 _IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo_rev1) #define MPTTARGETINFO _IOWR(MPT_MAGIC_NUMBER,18,struct mpt_ioctl_targetinfo) #define MPTTEST _IOWR(MPT_MAGIC_NUMBER,19,struct mpt_ioctl_test) #define MPTEVENTQUERY _IOWR(MPT_MAGIC_NUMBER,21,struct mpt_ioctl_eventquery) #define MPTEVENTENABLE _IOWR(MPT_MAGIC_NUMBER,22,struct mpt_ioctl_eventenable) #define MPTEVENTREPORT _IOWR(MPT_MAGIC_NUMBER,23,struct mpt_ioctl_eventreport) #define MPTHARDRESET _IOWR(MPT_MAGIC_NUMBER,24,struct mpt_ioctl_diag_reset) #define MPTFWREPLACE _IOWR(MPT_MAGIC_NUMBER,25,struct mpt_ioctl_replace_fw) #define MPTDIAGREGISTER _IOWR(MPT_MAGIC_NUMBER,26,mpt_diag_register_t) #define MPTDIAGRELEASE _IOWR(MPT_MAGIC_NUMBER,27,mpt_diag_release_t) #define MPTDIAGUNREGISTER _IOWR(MPT_MAGIC_NUMBER,28,mpt_diag_unregister_t) #define MPTDIAGQUERY _IOWR(MPT_MAGIC_NUMBER,29,mpt_diag_query_t) #define MPTDIAGREADBUFFER _IOWR(MPT_MAGIC_NUMBER,30,mpt_diag_read_buffer_t) /* * Hack to cope with MPT2 controllers which use a different * magic number. One one ioctl based on it is used. */ #define MPT2_MAGIC_NUMBER 'L' #define MPT2COMMAND _IOWR(MPT2_MAGIC_NUMBER,20,struct mpt_ioctl_command) /* * SPARC PLATFORM REMARKS: * IOCTL data structures that contain pointers * will have different sizes in the driver and applications * (as the app. will not use 8-byte pointers). * Apps should use MPTFWDOWNLOAD and MPTCOMMAND. * The driver will convert data from * mpt_fw_xfer32 (mpt_ioctl_command32) to mpt_fw_xfer (mpt_ioctl_command) * internally. * * If data structures change size, must handle as in IOCGETINFO. */ struct mpt_fw_xfer { unsigned int iocnum; /* IOC unit number */ unsigned int fwlen; void __user *bufp; /* Pointer to firmware buffer */ }; #if defined(__KERNEL__) && defined(CONFIG_COMPAT) struct mpt_fw_xfer32 { unsigned int iocnum; unsigned int fwlen; u32 bufp; }; #endif /*}*/ /* * IOCTL header structure. * iocnum - must be defined. * port - must be defined for all IOCTL commands other than MPTIOCINFO * maxDataSize - ignored on MPTCOMMAND commands * - ignored on MPTFWREPLACE commands * - on query commands, reports the maximum number of bytes to be returned * to the host driver (count includes the header). * That is, set to sizeof(struct mpt_ioctl_iocinfo) for fixed sized commands. * Set to sizeof(struct mpt_ioctl_targetinfo) + datasize for variable * sized commands. (MPTTARGETINFO, MPTEVENTREPORT) */ typedef struct _mpt_ioctl_header { unsigned int iocnum; /* IOC unit number */ unsigned int port; /* IOC port number */ int maxDataSize; /* Maximum Num. bytes to transfer on read */ } mpt_ioctl_header; /* * Issue a diagnostic reset */ struct mpt_ioctl_diag_reset { mpt_ioctl_header hdr; }; /* * PCI bus/device/function information structure. */ struct mpt_ioctl_pci_info { union { struct { unsigned int deviceNumber : 5; unsigned int functionNumber : 3; unsigned int busNumber : 24; } bits; unsigned int asUlong; } u; }; struct mpt_ioctl_pci_info2 { union { struct { unsigned int deviceNumber : 5; unsigned int functionNumber : 3; unsigned int busNumber : 24; } bits; unsigned int asUlong; } u; int segmentID; }; /* * Adapter Information Page * Read only. * Data starts at offset 0xC */ #define MPT_IOCTL_INTERFACE_SCSI (0x00) #define MPT_IOCTL_INTERFACE_FC (0x01) #define MPT_IOCTL_INTERFACE_FC_IP (0x02) #define MPT_IOCTL_INTERFACE_SAS (0x03) #define MPT_IOCTL_VERSION_LENGTH (32) struct mpt_ioctl_iocinfo { mpt_ioctl_header hdr; int adapterType; /* SCSI or FCP */ int port; /* port number */ int pciId; /* PCI Id. */ int hwRev; /* hardware revision */ int subSystemDevice; /* PCI subsystem Device ID */ int subSystemVendor; /* PCI subsystem Vendor ID */ int numDevices; /* number of devices */ int FWVersion; /* FW Version (integer) */ int BIOSVersion; /* BIOS Version (integer) */ char driverVersion[MPT_IOCTL_VERSION_LENGTH]; /* Driver Version (string) */ char busChangeEvent; char hostId; char rsvd[2]; struct mpt_ioctl_pci_info2 pciInfo; /* Added Rev 2 */ }; struct mpt_ioctl_iocinfo_rev1 { mpt_ioctl_header hdr; int adapterType; /* SCSI or FCP */ int port; /* port number */ int pciId; /* PCI Id. */ int hwRev; /* hardware revision */ int subSystemDevice; /* PCI subsystem Device ID */ int subSystemVendor; /* PCI subsystem Vendor ID */ int numDevices; /* number of devices */ int FWVersion; /* FW Version (integer) */ int BIOSVersion; /* BIOS Version (integer) */ char driverVersion[MPT_IOCTL_VERSION_LENGTH]; /* Driver Version (string) */ char busChangeEvent; char hostId; char rsvd[2]; struct mpt_ioctl_pci_info pciInfo; /* Added Rev 1 */ }; /* Original structure, must always accept these * IOCTLs. 4 byte pads can occur based on arch with * above structure. Wish to re-align, but cannot. */ struct mpt_ioctl_iocinfo_rev0 { mpt_ioctl_header hdr; int adapterType; /* SCSI or FCP */ int port; /* port number */ int pciId; /* PCI Id. */ int hwRev; /* hardware revision */ int subSystemDevice; /* PCI subsystem Device ID */ int subSystemVendor; /* PCI subsystem Vendor ID */ int numDevices; /* number of devices */ int FWVersion; /* FW Version (integer) */ int BIOSVersion; /* BIOS Version (integer) */ char driverVersion[MPT_IOCTL_VERSION_LENGTH]; /* Driver Version (string) */ char busChangeEvent; char hostId; char rsvd[2]; }; /* * Device Information Page * Report the number of, and ids of, all targets * on this IOC. The ids array is a packed structure * of the known targetInfo. * bits 31-24: reserved * 23-16: LUN * 15- 8: Bus Number * 7- 0: Target ID */ struct mpt_ioctl_targetinfo { mpt_ioctl_header hdr; int numDevices; /* Num targets on this ioc */ int targetInfo[1]; }; /* * Event reporting IOCTL's. These IOCTL's will * use the following defines: */ struct mpt_ioctl_eventquery { mpt_ioctl_header hdr; unsigned short eventEntries; unsigned short reserved; unsigned int eventTypes; }; struct mpt_ioctl_eventenable { mpt_ioctl_header hdr; unsigned int eventTypes; }; #ifndef __KERNEL__ typedef struct { uint event; uint eventContext; uint data[2]; } MPT_IOCTL_EVENTS; #endif struct mpt_ioctl_eventreport { mpt_ioctl_header hdr; MPT_IOCTL_EVENTS eventData[1]; }; #define MPT_MAX_NAME 32 struct mpt_ioctl_test { mpt_ioctl_header hdr; u8 name[MPT_MAX_NAME]; int chip_type; u8 product [MPT_PRODUCT_LENGTH]; }; /* Replace the FW image cached in host driver memory * newImageSize - image size in bytes * newImage - first byte of the new image */ typedef struct mpt_ioctl_replace_fw { mpt_ioctl_header hdr; int newImageSize; u8 newImage[1]; } mpt_ioctl_replace_fw_t; /* General MPT Pass through data strucutre * * iocnum * timeout - in seconds, command timeout. If 0, set by driver to * default value. * replyFrameBufPtr - reply location * dataInBufPtr - destination for read * dataOutBufPtr - data source for write * senseDataPtr - sense data location * maxReplyBytes - maximum number of reply bytes to be sent to app. * dataInSize - num bytes for data transfer in (read) * dataOutSize - num bytes for data transfer out (write) * dataSgeOffset - offset in words from the start of the request message * to the first SGL * MF[1]; * * Remark: Some config pages have bi-directional transfer, * both a read and a write. The basic structure allows for * a bidirectional set up. Normal messages will have one or * both of these buffers NULL. */ struct mpt_ioctl_command { mpt_ioctl_header hdr; int timeout; /* optional (seconds) */ char __user *replyFrameBufPtr; char __user *dataInBufPtr; char __user *dataOutBufPtr; char __user *senseDataPtr; int maxReplyBytes; int dataInSize; int dataOutSize; int maxSenseBytes; int dataSgeOffset; char MF[1]; }; /* * SPARC PLATFORM: See earlier remark. */ #if defined(__KERNEL__) && defined(CONFIG_COMPAT) struct mpt_ioctl_command32 { mpt_ioctl_header hdr; int timeout; u32 replyFrameBufPtr; u32 dataInBufPtr; u32 dataOutBufPtr; u32 senseDataPtr; int maxReplyBytes; int dataInSize; int dataOutSize; int maxSenseBytes; int dataSgeOffset; char MF[1]; }; #endif /*}*/ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * IOCTL Defines and Structures */ #define CPQFCTS_IOC_MAGIC 'Z' #define HP_IOC_MAGIC 'Z' #define HP_GETHOSTINFO _IOR(HP_IOC_MAGIC, 20, hp_host_info_t) #define HP_GETHOSTINFO1 _IOR(HP_IOC_MAGIC, 20, hp_host_info_rev0_t) #define HP_GETTARGETINFO _IOR(HP_IOC_MAGIC, 21, hp_target_info_t) typedef struct _hp_header { unsigned int iocnum; unsigned int host; unsigned int channel; unsigned int id; unsigned int lun; } hp_header_t; /* * Header: * iocnum required (input) * host ignored * channe ignored * id ignored * lun ignored */ typedef struct _hp_host_info { hp_header_t hdr; u16 vendor; u16 device; u16 subsystem_vendor; u16 subsystem_id; u8 devfn; u8 bus; ushort host_no; /* SCSI Host number, if scsi driver not loaded*/ u8 fw_version[16]; /* string */ u8 serial_number[24]; /* string */ u32 ioc_status; u32 bus_phys_width; u32 base_io_addr; u32 rsvd; unsigned int hard_resets; /* driver initiated resets */ unsigned int soft_resets; /* ioc, external resets */ unsigned int timeouts; /* num timeouts */ } hp_host_info_t; /* replace ulongs with uints, need to preserve backwards * compatibility. */ typedef struct _hp_host_info_rev0 { hp_header_t hdr; u16 vendor; u16 device; u16 subsystem_vendor; u16 subsystem_id; u8 devfn; u8 bus; ushort host_no; /* SCSI Host number, if scsi driver not loaded*/ u8 fw_version[16]; /* string */ u8 serial_number[24]; /* string */ u32 ioc_status; u32 bus_phys_width; u32 base_io_addr; u32 rsvd; unsigned long hard_resets; /* driver initiated resets */ unsigned long soft_resets; /* ioc, external resets */ unsigned long timeouts; /* num timeouts */ } hp_host_info_rev0_t; /* * Header: * iocnum required (input) * host required * channel required (bus number) * id required * lun ignored * * All error values between 0 and 0xFFFF in size. */ typedef struct _hp_target_info { hp_header_t hdr; u32 parity_errors; u32 phase_errors; u32 select_timeouts; u32 message_rejects; u32 negotiated_speed; u8 negotiated_width; u8 rsvd[7]; /* 8 byte alignment */ } hp_target_info_t; #define HP_STATUS_OTHER 1 #define HP_STATUS_OK 2 #define HP_STATUS_FAILED 3 #define HP_BUS_WIDTH_UNK 1 #define HP_BUS_WIDTH_8 2 #define HP_BUS_WIDTH_16 3 #define HP_BUS_WIDTH_32 4 #define HP_DEV_SPEED_ASYNC 2 #define HP_DEV_SPEED_FAST 3 #define HP_DEV_SPEED_ULTRA 4 #define HP_DEV_SPEED_ULTRA2 5 #define HP_DEV_SPEED_ULTRA160 6 #define HP_DEV_SPEED_SCSI1 7 #define HP_DEV_SPEED_ULTRA320 8 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ #define MPI_FW_DIAG_IOCTL (0x80646961) // dia #define MPI_FW_DIAG_TYPE_REGISTER (0x00000001) #define MPI_FW_DIAG_TYPE_UNREGISTER (0x00000002) #define MPI_FW_DIAG_TYPE_QUERY (0x00000003) #define MPI_FW_DIAG_TYPE_READ_BUFFER (0x00000004) #define MPI_FW_DIAG_TYPE_RELEASE (0x00000005) #define MPI_FW_DIAG_INVALID_UID (0x00000000) #define FW_DIAGNOSTIC_BUFFER_COUNT (3) #define FW_DIAGNOSTIC_UID_NOT_FOUND (0xFF) #define MPI_FW_DIAG_ERROR_SUCCESS (0x00000000) #define MPI_FW_DIAG_ERROR_FAILURE (0x00000001) #define MPI_FW_DIAG_ERROR_INVALID_PARAMETER (0x00000002) #define MPI_FW_DIAG_ERROR_POST_FAILED (0x00000010) #define MPI_FW_DIAG_ERROR_INVALID_UID (0x00000011) #define MPI_FW_DIAG_ERROR_RELEASE_FAILED (0x00000012) #define MPI_FW_DIAG_ERROR_NO_BUFFER (0x00000013) #define MPI_FW_DIAG_ERROR_ALREADY_RELEASED (0x00000014) #define MPT_DIAG_CAPABILITY(bufftype) (MPI_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER << bufftype) typedef struct _MPI_FW_DIAG_REGISTER { U8 TraceLevel; U8 BufferType; U16 Flags; U32 ExtendedType; U32 ProductSpecific[4]; U32 RequestedBufferSize; U32 UniqueId; } MPI_FW_DIAG_REGISTER, *PTR_MPI_FW_DIAG_REGISTER; typedef struct _mpt_diag_register { mpt_ioctl_header hdr; MPI_FW_DIAG_REGISTER data; } mpt_diag_register_t; typedef struct _MPI_FW_DIAG_UNREGISTER { U32 UniqueId; } MPI_FW_DIAG_UNREGISTER, *PTR_MPI_FW_DIAG_UNREGISTER; typedef struct _mpt_diag_unregister { mpt_ioctl_header hdr; MPI_FW_DIAG_UNREGISTER data; } mpt_diag_unregister_t; #define MPI_FW_DIAG_FLAG_APP_OWNED (0x0001) #define MPI_FW_DIAG_FLAG_BUFFER_VALID (0x0002) #define MPI_FW_DIAG_FLAG_FW_BUFFER_ACCESS (0x0004) typedef struct _MPI_FW_DIAG_QUERY { U8 TraceLevel; U8 BufferType; U16 Flags; U32 ExtendedType; U32 ProductSpecific[4]; U32 DataSize; U32 DriverAddedBufferSize; U32 UniqueId; } MPI_FW_DIAG_QUERY, *PTR_MPI_FW_DIAG_QUERY; typedef struct _mpt_diag_query { mpt_ioctl_header hdr; MPI_FW_DIAG_QUERY data; } mpt_diag_query_t; typedef struct _MPI_FW_DIAG_RELEASE { U32 UniqueId; } MPI_FW_DIAG_RELEASE, *PTR_MPI_FW_DIAG_RELEASE; typedef struct _mpt_diag_release { mpt_ioctl_header hdr; MPI_FW_DIAG_RELEASE data; } mpt_diag_release_t; #define MPI_FW_DIAG_FLAG_REREGISTER (0x0001) typedef struct _MPI_FW_DIAG_READ_BUFFER { U8 Status; U8 Reserved; U16 Flags; U32 StartingOffset; U32 BytesToRead; U32 UniqueId; U32 DiagnosticData[1]; } MPI_FW_DIAG_READ_BUFFER, *PTR_MPI_FW_DIAG_READ_BUFFER; typedef struct _mpt_diag_read_buffer { mpt_ioctl_header hdr; MPI_FW_DIAG_READ_BUFFER data; } mpt_diag_read_buffer_t; #endif smp_utils-0.97/lib/smp_lib.c0000664000175000017500000004043611617117536015044 0ustar douggdougg/* * Copyright (c) 2006-2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include "smp_lib.h" static char * version_str = "1.19 20110805"; /* spl-2 rev 2 */ /* Assume original SAS implementations were based on SAS-1.1 . In SAS-2 * and later, SMP responses should contain an accurate "response length" * field. However is SAS-1.1 (sas1r10.pdf) the "response length field * (byte 3) is always 0 irrespective of the response's length. There is * a similar problem with the "request length" field in the request. * So if zero is found in either the request/response fields this table * is consulted. * The units of 'def_req_len' and 'def_resp_len' are dwords (4 bytes) * calculated by: ((len_bytes - 8) / 4) where 'len_bytes' includes * the 4 byte CRC at the end of each frame. The 4 byte CRC field * does not need to be set (just space allocated (for some pass * throughs)). */ struct smp_func_def_rrlen { int func; /* '-1' for last entry */ int def_req_len; /* if 0== use this value, unless */ /* -2 -> no default; -3 -> different format */ int def_resp_len; /* if 0== use this value, unless */ /* -2 -> no default; -3 -> different format */ /* N.B. Some SAS-2 functions have 8 byte request or response lengths. This is noted by putting 0 in one of the two above fields. */ }; /* Positive request and response lengths match SAS-1.1 (sas1r10.pdf) */ struct smp_func_def_rrlen smp_def_rrlen_arr[] = { /* in numerical order by 'func' */ {SMP_FN_REPORT_GENERAL, 0, 6}, {SMP_FN_REPORT_MANUFACTURER, 0, 14}, {SMP_FN_READ_GPIO_REG, -3, -3}, /* obsolete, not applicable: SFF-8485 */ {SMP_FN_REPORT_SELF_CONFIG, -2, -2}, {SMP_FN_REPORT_ZONE_PERMISSION_TBL, -2, -2},/* variable length response */ {SMP_FN_REPORT_ZONE_MANAGER_PASS, -2, -2}, {SMP_FN_REPORT_BROADCAST, -2, -2}, {SMP_FN_READ_GPIO_REG_ENH, -2, -2}, /* SFF-8485 should explain */ {SMP_FN_DISCOVER, 2, 0xc}, {SMP_FN_REPORT_PHY_ERR_LOG, 2, 6}, {SMP_FN_REPORT_PHY_SATA, 2, 13}, {SMP_FN_REPORT_ROUTE_INFO, 2, 9}, {SMP_FN_REPORT_PHY_EVENT, -2, -2}, /* variable length response */ {SMP_FN_DISCOVER_LIST, -2, -2}, {SMP_FN_REPORT_PHY_EVENT_LIST, -2, -2}, {SMP_FN_REPORT_EXP_ROUTE_TBL_LIST, -2, -2}, {SMP_FN_CONFIG_GENERAL, 3, 0}, {SMP_FN_ENABLE_DISABLE_ZONING, -2, 0}, {SMP_FN_WRITE_GPIO_REG, -3, -3}, /* obsolete, not applicable: SFF-8485 */ {SMP_FN_WRITE_GPIO_REG_ENH, -2, -2}, /* SFF-8485 should explain */ {SMP_FN_ZONED_BROADCAST, -2, 0}, /* variable length request */ {SMP_FN_ZONE_LOCK, -2, -2}, {SMP_FN_ZONE_ACTIVATE, -2, 0}, {SMP_FN_ZONE_UNLOCK, -2, 0}, {SMP_FN_CONFIG_ZONE_MANAGER_PASS, -2, 0}, {SMP_FN_CONFIG_ZONE_PHY_INFO, -2, 0}, /* variable length request */ {SMP_FN_CONFIG_ZONE_PERMISSION_TBL, -2, 0}, /* variable length request */ {SMP_FN_CONFIG_ROUTE_INFO, 9, 0}, {SMP_FN_PHY_CONTROL, 9, 0}, {SMP_FN_PHY_TEST_FUNCTION, 9, 0}, {SMP_FN_CONFIG_PHY_EVENT, -2, 0}, /* variable length request */ {-1, -1, -1}, }; int smp_get_func_def_req_len(int func_code) { struct smp_func_def_rrlen * drlp; for (drlp = smp_def_rrlen_arr; drlp->func >= 0; ++drlp) { if (func_code == drlp->func) return drlp->def_req_len; } return -1; } int smp_get_func_def_resp_len(int func_code) { struct smp_func_def_rrlen * drlp; for (drlp = smp_def_rrlen_arr; drlp->func >= 0; ++drlp) { if (func_code == drlp->func) return drlp->def_resp_len; } return -1; } static struct smp_val_name smp_func_results[] = { {SMP_FRES_FUNCTION_ACCEPTED, "SMP function accepted"}, {SMP_FRES_UNKNOWN_FUNCTION, "Unknown SMP function"}, {SMP_FRES_FUNCTION_FAILED, "SMP function failed"}, {SMP_FRES_INVALID_REQUEST_LEN, "Invalid request frame length"}, {SMP_FRES_INVALID_EXP_CHANGE_COUNT, "Invalid expander change count"}, {SMP_FRES_BUSY, "Busy"}, {SMP_FRES_INCOMPLETE_DESCRIPTOR_LIST, "Incomplete descriptor list"}, {SMP_FRES_NO_PHY, "Phy does not exist"}, {SMP_FRES_NO_INDEX, "Index does not exist"}, {SMP_FRES_NO_SATA_SUPPORT, "Phy does not support SATA"}, {SMP_FRES_UNKNOWN_PHY_OP, "Unknown phy operation"}, {SMP_FRES_UNKNOWN_PHY_TEST_FN, "Unknown phy test function"}, {SMP_FRES_PHY_TEST_IN_PROGRESS, "Phy test function in progress"}, {SMP_FRES_PHY_VACANT, "Phy vacant"}, {SMP_FRES_UNKNOWN_PHY_EVENT_SRC, "Unknown phy event source"}, {SMP_FRES_UNKNOWN_DESCRIPTOR_TYPE, "Unknown descriptor type"}, {SMP_FRES_UNKNOWN_PHY_FILTER, "Unknown phy filter"}, {SMP_FRES_AFFILIATION_VIOLATION, "Affiliation violation"}, {SMP_FRES_SMP_ZONE_VIOLATION, "SMP zone violation"}, {SMP_FRES_NO_MANAGEMENT_ACCESS, "No management access rights"}, {SMP_FRES_UNKNOWN_EN_DIS_ZONING_VAL, "Unknown enable disable zoning value"}, {SMP_FRES_ZONE_LOCK_VIOLATION, "Zone lock violation"}, {SMP_FRES_NOT_ACTIVATED, "Not activated"}, {SMP_FRES_ZONE_GROUP_OUT_OF_RANGE, "Zone group out of range"}, {SMP_FRES_NO_PHYSICAL_PRESENCE, "No physical presence"}, {SMP_FRES_SAVING_NOT_SUPPORTED, "Saving not supported"}, {SMP_FRES_SOURCE_ZONE_GROUP, "Source zone group does not exist"}, {SMP_FRES_DIS_PASSWORD_NOT_SUPPORTED, "Disable password not supported"}, {0x0, NULL}, }; char * smp_get_func_res_str(int func_res, int buff_len, char * buff) { struct smp_val_name * vnp; for (vnp = smp_func_results; vnp->name; ++vnp) { if (func_res == vnp->value) { snprintf(buff, buff_len, "%s", vnp->name); return buff; } } snprintf(buff, buff_len, "Unknown function result code=0x%x\n", func_res); return buff; } int smp_is_naa5(unsigned long long addr) { return (0x5 == ((addr >> 60) & 0xf)); } /* safe_strerror() contributed by Clayton Weaver Allows for situation in which strerror() is given a wild value (or the C library is incomplete) and returns NULL. Still not thread safe. */ static char safe_errbuf[64] = {'u', 'n', 'k', 'n', 'o', 'w', 'n', ' ', 'e', 'r', 'r', 'n', 'o', ':', ' ', 0}; char * safe_strerror(int errnum) { size_t len; char * errstr; if (errnum < 0) errnum = -errnum; errstr = strerror(errnum); if (NULL == errstr) { len = strlen(safe_errbuf); snprintf(safe_errbuf + len, sizeof(safe_errbuf) - len, "%i", errnum); safe_errbuf[sizeof(safe_errbuf) - 1] = '\0'; /* bombproof */ return safe_errbuf; } return errstr; } /* Note the ASCII-hex output goes to stdout. 'no_ascii' allows for 3 output types: > 0 each line has address then up to 16 ASCII-hex bytes = 0 in addition, the bytes are listed in ASCII to the right < 0 only the ASCII-hex bytes are listed (i.e. without address) */ void dStrHex(const char* str, int len, int no_ascii) { const char* p = str; unsigned char c; char buff[82]; int a = 0; const int bpstart = 5; const int cpstart = 60; int cpos = cpstart; int bpos = bpstart; int i, k; if (len <= 0) return; memset(buff, ' ', 80); buff[80] = '\0'; if (no_ascii < 0) { for (k = 0; k < len; k++) { c = *p++; bpos += 3; if (bpos == (bpstart + (9 * 3))) bpos++; sprintf(&buff[bpos], "%.2x", (int)(unsigned char)c); buff[bpos + 2] = ' '; if ((k > 0) && (0 == ((k + 1) % 16))) { printf("%.60s\n", buff); bpos = bpstart; memset(buff, ' ', 80); } } if (bpos > bpstart) printf("%.60s\n", buff); return; } /* no_ascii>=0, start each line with address (offset) */ k = sprintf(buff + 1, "%.2x", a); buff[k + 1] = ' '; for (i = 0; i < len; i++) { c = *p++; bpos += 3; if (bpos == (bpstart + (9 * 3))) bpos++; sprintf(&buff[bpos], "%.2x", (int)(unsigned char)c); buff[bpos + 2] = ' '; if (no_ascii) buff[cpos++] = ' '; else { if ((c < ' ') || (c >= 0x7f)) c = '.'; buff[cpos++] = c; } if (cpos > (cpstart + 15)) { printf("%.76s\n", buff); bpos = bpstart; cpos = cpstart; a += 16; memset(buff, ' ', 80); k = sprintf(buff + 1, "%.2x", a); buff[k + 1] = ' '; } } if (cpos > cpstart) printf("%.76s\n", buff); } /* If the number in 'buf' can be decoded or the multiplier is unknown * then -1 is returned. Accepts a hex prefix (0x or 0X) or suffix (h or * H) or a decimal multiplier suffix (as per GNU's dd (since 2002: SI and * IEC 60027-2)). Main (SI) multipliers supported: K, M, G. */ int smp_get_num(const char * buf) { int res, num, n, len; unsigned int unum; char * cp; char c = 'c'; char c2, c3; if ((NULL == buf) || ('\0' == buf[0])) return -1; len = strlen(buf); if (('0' == buf[0]) && (('x' == buf[1]) || ('X' == buf[1]))) { res = sscanf(buf + 2, "%x", &unum); num = unum; } else if ('H' == toupper(buf[len - 1])) { res = sscanf(buf, "%x", &unum); num = unum; } else res = sscanf(buf, "%d%c%c%c", &num, &c, &c2, &c3); if (res < 1) return -1LL; else if (1 == res) return num; else { if (res > 2) c2 = toupper(c2); if (res > 3) c3 = toupper(c3); switch (toupper(c)) { case ',': case 'C': return num; case 'W': return num * 2; case 'B': return num * 512; case 'K': if (2 == res) return num * 1024; if (('B' == c2) || ('D' == c2)) return num * 1000; if (('I' == c2) && (4 == res) && ('B' == c3)) return num * 1024; return -1; case 'M': if (2 == res) return num * 1048576; if (('B' == c2) || ('D' == c2)) return num * 1000000; if (('I' == c2) && (4 == res) && ('B' == c3)) return num * 1048576; return -1; case 'G': if (2 == res) return num * 1073741824; if (('B' == c2) || ('D' == c2)) return num * 1000000000; if (('I' == c2) && (4 == res) && ('B' == c3)) return num * 1073741824; return -1; case 'X': cp = strchr(buf, 'x'); if (NULL == cp) cp = strchr(buf, 'X'); if (cp) { n = smp_get_num(cp + 1); if (-1 != n) return num * n; } return -1; default: fprintf(stderr, "unrecognized multiplier\n"); return -1; } } } /* If the number in 'buf' can be decoded or the multiplier is unknown then -1LL is returned. Accepts a hex prefix (0x or 0X) or a decimal multiplier suffix (as per GNU's dd (since 2002: SI and IEC 60027-2)). Main (SI) multipliers supported: K, M, G, T, P. */ long long smp_get_llnum(const char * buf) { int res, len; long long num, ll; unsigned long long unum; char * cp; char c = 'c'; char c2, c3; if ((NULL == buf) || ('\0' == buf[0])) return -1LL; len = strlen(buf); if (('0' == buf[0]) && (('x' == buf[1]) || ('X' == buf[1]))) { res = sscanf(buf + 2, "%llx", &unum); num = unum; } else if ('H' == toupper(buf[len - 1])) { res = sscanf(buf, "%llx", &unum); num = unum; } else res = sscanf(buf, "%lld%c%c%c", &num, &c, &c2, &c3); if (res < 1) return -1LL; else if (1 == res) return num; else { if (res > 2) c2 = toupper(c2); if (res > 3) c3 = toupper(c3); switch (toupper(c)) { case 'C': return num; case 'W': return num * 2; case 'B': return num * 512; case 'K': if (2 == res) return num * 1024; if (('B' == c2) || ('D' == c2)) return num * 1000; if (('I' == c2) && (4 == res) && ('B' == c3)) return num * 1024; return -1LL; case 'M': if (2 == res) return num * 1048576; if (('B' == c2) || ('D' == c2)) return num * 1000000; if (('I' == c2) && (4 == res) && ('B' == c3)) return num * 1048576; return -1LL; case 'G': if (2 == res) return num * 1073741824; if (('B' == c2) || ('D' == c2)) return num * 1000000000; if (('I' == c2) && (4 == res) && ('B' == c3)) return num * 1073741824; return -1LL; case 'T': if (2 == res) return num * 1099511627776LL; if (('B' == c2) || ('D' == c2)) return num * 1000000000000LL; if (('I' == c2) && (4 == res) && ('B' == c3)) return num * 1099511627776LL; return -1LL; case 'P': if (2 == res) return num * 1099511627776LL * 1024; if (('B' == c2) || ('D' == c2)) return num * 1000000000000LL * 1000; if (('I' == c2) && (4 == res) && ('B' == c3)) return num * 1099511627776LL * 1024; return -1LL; case 'X': cp = strchr(buf, 'x'); if (NULL == cp) cp = strchr(buf, 'X'); if (cp) { ll = smp_get_llnum(cp + 1); if (-1LL != ll) return num * ll; } return -1LL; default: fprintf(stderr, "unrecognized multiplier\n"); return -1LL; } } } /* If the non-negative number in 'buf' can be decoded in decimal (default) * or hex then it is returned, else -1 is returned. Skips leading and * trailing spaces, tabs and commas. Hex numbers are indicated by a "0x" * or "0X" prefix, or by a 'h' or 'H' suffix. */ int smp_get_dhnum(const char * buf) { int res, n, len; unsigned int unum; if ((NULL == buf) || ('\0' == buf[0])) return -1; buf += strspn(buf, " ,\t"); if (('0' == buf[0]) && ('X' == toupper(buf[1]))) { res = sscanf(buf + 2, "%x", &unum); return res ? (int)unum : -1; } len = strcspn(buf, " ,\t"); if ('H' == toupper(buf[len - 1])) { res = sscanf(buf, "%x", &unum); return res ? (int)unum : -1; } res = sscanf(buf, "%d", &n); return res ? n : -1; } const char * smp_lib_version() { return version_str; } smp_utils-0.97/lib/smp_fre_cam.c0000664000175000017500000001470411617607776015703 0ustar douggdougg/* * Copyright (c) 2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include // #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" #define I_CAM 1 struct tobj_cam_t { struct cam_device * cam_dev; char devname[DEV_IDLEN + 1]; /* for cam */ int unitnum; /* for cam */ }; /* Note that CAM (circa FreeBSD 9) cannot directly communicate with a SAS * expander because it isn't a SCSI device. FreeBSD assumes each SAS * expander is paired with a SES (enclosure) device. This seems to be true * for SAS-2 expanders but not the older SAS-1 expanders. Hence device_name * will be something like /dev/ses0 . */ int smp_initiator_open(const char * device_name, int subvalue, const char * i_params, unsigned long long sa, struct smp_target_obj * tobj, int verbose) { int j; struct cam_device* cam_dev; struct tobj_cam_t * tcp; i_params = i_params; if ((NULL == tobj) || (NULL == device_name)) return -1; memset(tobj, 0, sizeof(struct smp_target_obj)); strncpy(tobj->device_name, device_name, SMP_MAX_DEVICE_NAME); if (sa) { for (j = 0; j < 8; ++j, (sa >>= 8)) tobj->sas_addr[j] = (sa & 0xff); } tobj->interface_selector = I_CAM; tcp = (struct tobj_cam_t *) calloc(1, sizeof(struct tobj_cam_t)); if (tcp == NULL) { // errno already set by call to calloc() return -1; } if (cam_get_device(device_name, tcp->devname, DEV_IDLEN, &(tcp->unitnum)) == -1) { if (verbose) fprintf(stderr, "bad device name structure\n"); free(tcp); return -1; } if (! (cam_dev = cam_open_spec_device(tcp->devname, tcp->unitnum, O_RDWR, NULL))) { fprintf(stderr, "cam_open_spec_device: %s\n", cam_errbuf); free(tcp); return -1; } tcp->cam_dev = cam_dev; tobj->vp = tcp; tobj->opened = 1; tobj->subvalue = subvalue; /* unused */ return 0; } int smp_send_req(const struct smp_target_obj * tobj, struct smp_req_resp * rresp, int verbose) { union ccb *ccb; struct tobj_cam_t * tcp; int retval, emsk; int flags = 0; if ((NULL == tobj) || (0 == tobj->opened) || (NULL == tobj->vp)) { if (verbose) fprintf(stderr, "smp_send_req: nothing open??\n"); return -1; } if (I_CAM != tobj->interface_selector) { fprintf(stderr, "smp_send_req: unknown transport [%d]\n", tobj->interface_selector); return -1; } tcp = (struct tobj_cam_t *)tobj->vp; if (! (ccb = cam_getccb(tcp->cam_dev))) { fprintf(stderr, "cam_getccb: failed\n"); return -1; } // clear out structure, except for header that was filled in for us bzero(&(&ccb->ccb_h)[1], sizeof(union ccb) - sizeof(struct ccb_hdr)); flags |= CAM_DEV_QFRZDIS; /* CAM does not want request_len including CRC */ cam_fill_smpio(&ccb->smpio, /*retries*/ 2, /* guess */ /*cbfcnp*/ NULL, /*flags*/ flags, /*smp_request*/ rresp->request, /*smp_request_len*/ rresp->request_len - 4, /*smp_response*/ rresp->response, /*smp_response_len*/ rresp->max_response_len, /*timeout*/ 5000); /* milliseconds ? */ ccb->smpio.flags = SMP_FLAG_NONE; emsk = 0; if (((retval = cam_send_ccb(tcp->cam_dev, ccb)) < 0) || ((((emsk = (ccb->ccb_h.status & CAM_STATUS_MASK))) != CAM_REQ_CMP) && (emsk != CAM_SMP_STATUS_ERROR))) { cam_error_print(tcp->cam_dev, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); cam_freeccb(ccb); return -1; } if (((emsk == CAM_REQ_CMP) || (emsk == CAM_SMP_STATUS_ERROR)) && (rresp->max_response_len > 0)) { if ((emsk == CAM_SMP_STATUS_ERROR) && (verbose > 3)) cam_error_print(tcp->cam_dev, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); rresp->act_response_len = -1; cam_freeccb(ccb); return 0; } else { fprintf(stderr, "smp_send_req(cam): not sure how it got here\n"); cam_freeccb(ccb); return emsk ? emsk : -1; } } int smp_initiator_close(struct smp_target_obj * tobj) { struct tobj_cam_t * tcp; if ((NULL == tobj) || (0 == tobj->opened)) { fprintf(stderr, "smp_initiator_close: nothing open??\n"); return -1; } if (tobj->vp) { tcp = (struct tobj_cam_t *)tobj->vp; cam_close_device(tcp->cam_dev); free(tobj->vp); tobj->vp = NULL; } tobj->opened = 0; return 0; } smp_utils-0.97/lib/Makefile.am0000664000175000017500000000147411617405305015300 0ustar douggdougg if OS_LINUX libsmputils1_la_SOURCES = \ smp_lib.c \ smp_lin_bsg.c \ smp_lin_sel.c \ smp_mptctl_io.c EXTRA_libsmputils1_la_SOURCES = \ smp_dummy.c endif if OS_FREEBSD libsmputils1_la_SOURCES = \ smp_lib.c \ smp_fre_cam.c EXTRA_libsmputils1_la_SOURCES = \ smp_dummy.c endif if OS_SOLARIS libsmputils1_la_SOURCES = \ smp_lib.c \ smp_sol_usmp.c EXTRA_libsmputils1_la_SOURCES = \ smp_dummy.c endif AM_CFLAGS = -I ../include -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -W # AM_CFLAGS = -I ../include -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -W -pedantic -std=c99 lib_LTLIBRARIES = libsmputils1.la libsmputils1_la_LDFLAGS = -version-info 1:0:0 libsmputils1_la_LIBADD = @os_libs@ ## libsmputils1_la_LIBADD = @GETOPT_O_FILES@ @os_libs@ ## libsmputi1s1_la_DEPENDENCIES = @GETOPT_O_FILES@ smp_utils-0.97/lib/smp_lin_bsg.h0000664000175000017500000000056711616767347015733 0ustar douggdougg#ifndef SMP_LIN_BSG_H #define SMP_LIN_BSG_H #include "smp_lib.h" extern int chk_lin_bsg_device(const char * dev_name, int verbose); extern int open_lin_bsg_device(const char * dev_name, int verbose); extern int close_lin_bsg_device(int fd); extern int send_req_lin_bsg(int fd, int subvalue, struct smp_req_resp * rresp, int verbose); #endif smp_utils-0.97/lib/smp_lin_sel.c0000664000175000017500000001303311617117536015714 0ustar douggdougg/* * Copyright (c) 2006-2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" #include "smp_mptctl_io.h" #include "smp_lin_bsg.h" #define I_MPT 2 #define I_SGV4 4 int smp_initiator_open(const char * device_name, int subvalue, const char * i_params, unsigned long long sa, struct smp_target_obj * tobj, int verbose) { int force = 0; char * cp; int res, j; if ((NULL == tobj) || (NULL == device_name)) return -1; memset(tobj, 0, sizeof(struct smp_target_obj)); strncpy(tobj->device_name, device_name, SMP_MAX_DEVICE_NAME); if (sa) { for (j = 0; j < 8; ++j, (sa >>= 8)) tobj->sas_addr[j] = (sa & 0xff); } if (i_params[0]) { if (0 == strncmp("mpt", i_params, 3)) tobj->interface_selector = I_MPT; else if ((0 == strncmp("sgv4", i_params, 2)) || (0 == strncmp("bsg", i_params, 3))) tobj->interface_selector = I_SGV4; else if (0 == strncmp("for", i_params, 3)) force = 1; else if (verbose > 3) fprintf(stderr, "smp_initiator_open: interface not recognized\n"); cp = strchr(i_params, ','); if (cp) { if ((tobj->interface_selector > 0) && (0 == strncmp("for", cp + 1, 3))) force = 1; } } if ((I_SGV4 == tobj->interface_selector) || (0 == tobj->interface_selector)) { res = chk_lin_bsg_device(device_name, verbose); if (res || force) { if (0 == tobj->interface_selector) tobj->interface_selector = I_SGV4; if ((0 == res) && force) fprintf(stderr, "... overriding failed check due " "to 'force'\n"); res = open_lin_bsg_device(device_name, verbose); if (res < 0) goto err_out; tobj->fd = res; tobj->subvalue = subvalue; tobj->opened = 1; return 0; } else if (verbose > 2) fprintf(stderr, "chk_lin_bsg_device: failed\n"); } if ((I_MPT == tobj->interface_selector) || (0 == tobj->interface_selector)) { res = chk_mpt_device(device_name, verbose); if (res || force) { if (0 == tobj->interface_selector) tobj->interface_selector = I_MPT; if ((0 == res) && force) fprintf(stderr, "... overriding failed check due " "to 'force'\n"); res = open_mpt_device(device_name, verbose); if (res < 0) goto err_out; tobj->fd = res; tobj->subvalue = subvalue; tobj->opened = 1; return 0; } else if (verbose > 2) fprintf(stderr, "smp_initiator_open: chk_mpt_device failed\n"); } err_out: fprintf(stderr, "smp_initiator_open: failed to open %s\n", device_name); return -1; } int smp_send_req(const struct smp_target_obj * tobj, struct smp_req_resp * rresp, int verbose) { if ((NULL == tobj) || (0 == tobj->opened)) { if (verbose > 2) fprintf(stderr, "smp_send_req: nothing open??\n"); return -1; } if (I_SGV4 == tobj->interface_selector) return send_req_lin_bsg(tobj->fd, tobj->subvalue, rresp, verbose); else if (I_MPT == tobj->interface_selector) return send_req_mpt(tobj->fd, tobj->subvalue, tobj->sas_addr, rresp, verbose); else { if (verbose) fprintf(stderr, "smp_send_req: no transport??\n"); return -1; } } int smp_initiator_close(struct smp_target_obj * tobj) { int res; if ((NULL == tobj) || (0 == tobj->opened)) { fprintf(stderr, "smp_initiator_close: nothing open??\n"); return -1; } if (I_MPT == tobj->interface_selector) { res = close_mpt_device(tobj->fd); if (res < 0) fprintf(stderr, "close_mpt_device: failed\n"); } tobj->opened = 0; return 0; } smp_utils-0.97/lib/mpi_type.h0000664000175000017500000000430011616767347015252 0ustar douggdougg/* * Copyright (c) 2000-2004 LSI Logic Corporation. * * * Name: mpi_type.h * Title: MPI Basic type definitions * Creation Date: June 6, 2000 * * mpi_type.h Version: 01.05.01 * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 06-06-00 01.00.01 Update version number for 1.0 release. * 11-02-00 01.01.01 Original release for post 1.0 work * 02-20-01 01.01.02 Added define and ifdef for MPI_POINTER. * 08-08-01 01.02.01 Original release for v1.2 work. * 05-11-04 01.03.01 Original release for MPI v1.3. * 08-19-04 01.05.01 Original release for MPI v1.5. * -------------------------------------------------------------------------- */ #ifndef MPI_TYPE_H #define MPI_TYPE_H /******************************************************************************* * Define MPI_POINTER if it hasn't already been defined. By default MPI_POINTER * is defined to be a near pointer. MPI_POINTER can be defined as a far pointer * by defining MPI_POINTER as "far *" before this header file is included. */ #ifndef MPI_POINTER #define MPI_POINTER * #endif /***************************************************************************** * * B a s i c T y p e s * *****************************************************************************/ typedef signed char S8; typedef unsigned char U8; typedef signed short S16; typedef unsigned short U16; typedef int32_t S32; typedef u_int32_t U32; typedef struct _S64 { U32 Low; S32 High; } S64; typedef struct _U64 { U32 Low; U32 High; } U64; /****************************************************************************/ /* Pointers */ /****************************************************************************/ typedef S8 *PS8; typedef U8 *PU8; typedef S16 *PS16; typedef U16 *PU16; typedef S32 *PS32; typedef U32 *PU32; typedef S64 *PS64; typedef U64 *PU64; #endif smp_utils-0.97/lib/README_lin_mpt0000664000175000017500000000201011616767347015651 0ustar douggdouggThis interface uses a device node used by various MPT Fusion drivers. It is called '/dev/mptctl' or '/dev/mpt2ctl' and it is a char device (major: 10, minor: 220 or 221). Currently a special module needs to loaded called 'mptctl'. This can be loaded with 'modprobe mptctl'. If there are multiple MPT Fusion HBAs on one computer then the following construction: '/dev/mptctl,' can be used for the argument. LSI Logic call the a "ioc" number. If not given it defaults to 0 . There is a pass through ioctl defined for the /dev/mptctl device which this library uses. Since '/dev/mptctl,' only describes a SMP host (initiator), the SAS address of the target SMP device must also be given. This can be done on the command line (with the '--sa=' option) or with the environment variable SMP_UTILS_SAS_ADDR set to the SAS address of the SMP target device. To save typing, the SMP host (i.e. '/dev/mptctl,') can be placed in the SMP_UTILS_DEVICE environment variable Douglas Gilbert 29th December 2008 smp_utils-0.97/lib/smp_mptctl_io.h0000664000175000017500000000070111616767347016276 0ustar douggdougg#ifndef SMP_MPTCTL_IO_H #define SMP_MPTCTL_IO_H #include "smp_lib.h" /* These functions are the interface to upper level. */ extern int chk_mpt_device(const char * dev_name, int verbose); extern int open_mpt_device(const char * dev_name, int verbose); extern int close_mpt_device(int fd); extern int send_req_mpt(int fd, int subvalue, const unsigned char * target_sa, struct smp_req_resp * rresp, int verbose); #endif smp_utils-0.97/lib/mpi_sas.h0000664000175000017500000002733411616767347015073 0ustar douggdougg/* * Copyright (c) 2004 LSI Logic Corporation. * * * Name: mpi_sas.h * Title: MPI Serial Attached SCSI structures and definitions * Creation Date: August 19, 2004 * * mpi_sas.h Version: 01.05.02 * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ * 08-19-04 01.05.01 Original release. * 08-30-05 01.05.02 Added DeviceInfo bit for SEP. * Added PrimFlags and Primitive field to SAS IO Unit * Control request, and added a new operation code. * -------------------------------------------------------------------------- */ #ifndef MPI_SAS_H #define MPI_SAS_H /* * Values for SASStatus. */ #define MPI_SASSTATUS_SUCCESS (0x00) #define MPI_SASSTATUS_UNKNOWN_ERROR (0x01) #define MPI_SASSTATUS_INVALID_FRAME (0x02) #define MPI_SASSTATUS_UTC_BAD_DEST (0x03) #define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04) #define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) #define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) #define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) #define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) #define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09) #define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) #define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) #define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) #define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) #define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) #define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) #define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) #define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11) #define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12) #define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) #define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) /* * Values for the SAS DeviceInfo field used in SAS Device Status Change Event * data and SAS IO Unit Configuration pages. */ #define MPI_SAS_DEVICE_INFO_SEP (0x00004000) #define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) #define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) #define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) #define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) #define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200) #define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) #define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) #define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) #define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) #define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) #define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008) #define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) #define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) #define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001) #define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) #define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) /***************************************************************************** * * S e r i a l A t t a c h e d S C S I M e s s a g e s * *****************************************************************************/ /****************************************************************************/ /* Serial Management Protocol Passthrough Request */ /****************************************************************************/ typedef struct _MSG_SMP_PASSTHROUGH_REQUEST { U8 PassthroughFlags; /* 00h */ U8 PhysicalPort; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U16 RequestDataLength; /* 04h */ U8 ConnectionRate; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U32 Reserved1; /* 0Ch */ U64 SASAddress; /* 10h */ U32 Reserved2; /* 18h */ U32 Reserved3; /* 1Ch */ SGE_SIMPLE_UNION SGL; /* 20h */ } MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST, SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t; /* values for PassthroughFlags field */ #define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) /* values for ConnectionRate field */ #define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00) #define MPI_SMP_PT_REQ_CONNECT_RATE_1_5 (0x08) #define MPI_SMP_PT_REQ_CONNECT_RATE_3_0 (0x09) /* Serial Management Protocol Passthrough Reply */ typedef struct _MSG_SMP_PASSTHROUGH_REPLY { U8 PassthroughFlags; /* 00h */ U8 PhysicalPort; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U16 ResponseDataLength; /* 04h */ U8 Reserved1; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 Reserved2; /* 0Ch */ U8 SASStatus; /* 0Dh */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U32 Reserved3; /* 14h */ U8 ResponseData[4]; /* 18h */ } MSG_SMP_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REPLY, SmpPassthroughReply_t, MPI_POINTER pSmpPassthroughReply_t; #define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80) /****************************************************************************/ /* SATA Passthrough Request */ /****************************************************************************/ typedef struct _MSG_SATA_PASSTHROUGH_REQUEST { U8 TargetID; /* 00h */ U8 Bus; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U16 PassthroughFlags; /* 04h */ U8 ConnectionRate; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U32 Reserved1; /* 0Ch */ U32 Reserved2; /* 10h */ U32 Reserved3; /* 14h */ U32 DataLength; /* 18h */ U8 CommandFIS[20]; /* 1Ch */ SGE_SIMPLE_UNION SGL; /* 30h */ } MSG_SATA_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REQUEST, SataPassthroughRequest_t, MPI_POINTER pSataPassthroughRequest_t; /* values for PassthroughFlags field */ #define MPI_SATA_PT_REQ_PT_FLAGS_RESET_DEVICE (0x0200) #define MPI_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100) #define MPI_SATA_PT_REQ_PT_FLAGS_DMA_QUEUED (0x0080) #define MPI_SATA_PT_REQ_PT_FLAGS_PACKET_COMMAND (0x0040) #define MPI_SATA_PT_REQ_PT_FLAGS_DMA (0x0020) #define MPI_SATA_PT_REQ_PT_FLAGS_PIO (0x0010) #define MPI_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004) #define MPI_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002) #define MPI_SATA_PT_REQ_PT_FLAGS_READ (0x0001) /* values for ConnectionRate field */ #define MPI_SATA_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00) #define MPI_SATA_PT_REQ_CONNECT_RATE_1_5 (0x08) #define MPI_SATA_PT_REQ_CONNECT_RATE_3_0 (0x09) /* SATA Passthrough Reply */ typedef struct _MSG_SATA_PASSTHROUGH_REPLY { U8 TargetID; /* 00h */ U8 Bus; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U16 PassthroughFlags; /* 04h */ U8 Reserved1; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 Reserved2; /* 0Ch */ U8 SASStatus; /* 0Dh */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U8 StatusFIS[20]; /* 14h */ U32 StatusControlRegisters; /* 28h */ U32 TransferCount; /* 2Ch */ } MSG_SATA_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REPLY, SataPassthroughReply_t, MPI_POINTER pSataPassthroughReply_t; /****************************************************************************/ /* SAS IO Unit Control Request */ /****************************************************************************/ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST { U8 Operation; /* 00h */ U8 Reserved1; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U16 Reserved2; /* 04h */ U8 Reserved3; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 TargetID; /* 0Ch */ U8 Bus; /* 0Dh */ U8 PhyNum; /* 0Eh */ U8 PrimFlags; /* 0Fh */ U32 Primitive; /* 10h */ U64 SASAddress; /* 14h */ U32 Reserved4; /* 1Ch */ } MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST, SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t; /* values for the Operation field */ #define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01) #define MPI_SAS_OP_CLEAR_ALL_PERSISTENT (0x02) #define MPI_SAS_OP_PHY_LINK_RESET (0x06) #define MPI_SAS_OP_PHY_HARD_RESET (0x07) #define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) #define MPI_SAS_OP_MAP_CURRENT (0x09) #define MPI_SAS_OP_SEND_PRIMITIVE (0x0A) /* values for the PrimFlags field */ #define MPI_SAS_PRIMFLAGS_SINGLE (0x08) #define MPI_SAS_PRIMFLAGS_TRIPLE (0x02) #define MPI_SAS_PRIMFLAGS_REDUNDANT (0x01) /* SAS IO Unit Control Reply */ typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY { U8 Operation; /* 00h */ U8 Reserved1; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U16 Reserved2; /* 04h */ U8 Reserved3; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved4; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ } MSG_SAS_IOUNIT_CONTROL_REPLY, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REPLY, SasIoUnitControlReply_t, MPI_POINTER pSasIoUnitControlReply_t; #endif smp_utils-0.97/lib/smp_lin_bsg.c0000664000175000017500000002067711661054767015725 0ustar douggdougg#define _GNU_SOURCE #include #include #include #include #include #include #include //#include #include #include #include #include #include //#include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lin_bsg.h" #if defined(IGNORE_LINUX_BSG) || ! defined(HAVE_LINUX_BSG_H) /* Returns 1 if bsg dev_name else 0 . */ int chk_lin_bsg_device(const char * dev_name, int verbose) { dev_name = dev_name; verbose = verbose; return 0; } /* Returns open file desriptor to dev_name bsg device or -1 */ int open_lin_bsg_device(const char * dev_name, int verbose) { dev_name = dev_name; verbose = verbose; return -1; } int close_lin_bsg_device(int fd) { fd = fd; return 0; } /* Returns 0 on success else -1 . */ int send_req_lin_bsg(int fd, int subvalue, struct smp_req_resp * rresp, int verbose) { fd = fd; subvalue = subvalue; rresp = rresp; verbose = verbose; return -1; } # else /* have and want to use it */ #include #define DEF_TIMEOUT_MS 20000 /* 20 seconds */ /* Returns 1 if bsg dev_name else 0 . */ int chk_lin_bsg_device(const char * dev_name, int verbose) { char buff[1024]; char sysfs_nm[1024]; char * cp; struct stat st; int len; if (strlen(dev_name) > sizeof(buff)) { fprintf(stderr, "device name too long (greater than %d bytes)\n", (int)sizeof(buff)); return 0; } len = 0; if ('/' != dev_name[0]) { if (getcwd(buff, sizeof(buff) - 1)) { len = strlen(buff); if ('/' != buff[len - 1]) buff[len++] = '/'; } else { if (verbose > 3) perror("chk_lin_bsg_device: getcwd failed"); return 0; } strncpy(buff + len, dev_name, sizeof(buff) - len); } else strncpy(buff, dev_name, sizeof(buff)); buff[sizeof(buff) - 1] = '\0'; if ('/' == buff[strlen(buff) - 1]) buff[strlen(buff) - 1] = '\0'; if (0 == strncmp(buff, "/sys/", 5)) { if (strstr(buff, "/bsg/")) { if (stat(buff, &st) < 0) { if (verbose > 3) { fprintf(stderr, "chk_lin_bsg_device: stat() on %s " "failed: ", buff); perror(""); } return 0; } return 1; } else return 0; } if (0 == strncmp(buff, "/dev/", 5)) { cp = strrchr(buff, '/'); snprintf(sysfs_nm, sizeof(sysfs_nm), "/sys/class/bsg/%s/dev", cp + 1); if (stat(sysfs_nm, &st) < 0) { if (verbose > 3) { fprintf(stderr, "chk_lin_bsg_device: stat() on redirected %s " "failed: ", sysfs_nm); perror(""); } return 0; } return 1; } return 0; } /* Returns open file desriptor to dev_name bsg device or -1 */ int open_lin_bsg_device(const char * dev_name, int verbose) { char buff[1024]; char sysfs_nm[1024]; int len, res, maj, min; int ret = -1; FILE * fp = NULL; struct timeval t; if (strlen(dev_name) > sizeof(buff)) { fprintf(stderr, "device name too long (greater than %d bytes)\n", (int)sizeof(buff)); return 0; } len = 0; if ('/' != dev_name[0]) { if (getcwd(buff, sizeof(buff) - 1)) { len = strlen(buff); if ('/' != buff[len - 1]) buff[len++] = '/'; } else { if (verbose) perror("open_lin_bsg_device: getcwd failed"); return 0; } strncpy(buff + len, dev_name, sizeof(buff) - len); } else strncpy(buff, dev_name, sizeof(buff)); buff[sizeof(buff) - 1] = '\0'; if ('/' == buff[strlen(buff) - 1]) buff[strlen(buff) - 1] = '\0'; if (0 == strncmp(buff, "/sys/", 5)) { snprintf(sysfs_nm, sizeof(sysfs_nm), "%s/dev", buff); fp = fopen(sysfs_nm, "r"); if (! fp) { if (verbose) perror("open_lin_bsg_device: fopen() in sysfs failed"); return -1; } if (! fgets(buff, sizeof(buff), fp)) { if (verbose) perror("open_lin_bsg_device: fgets() in sysfs failed"); goto close_sysfs; } if (2 != sscanf(buff, "%d:%d", &maj, &min)) { if (verbose) perror("open_lin_bsg_device: fclose() in sysfs failed"); goto close_sysfs; } res = gettimeofday(&t, NULL); if (res) { if (verbose) perror("open_lin_bsg_device: gettimeofday() failed"); goto close_sysfs; } memset(buff, 0, sizeof(buff)); snprintf(buff, sizeof(buff), "/tmp/bsg_%lx%lx", t.tv_sec, t.tv_usec); if (verbose > 2) fprintf(stderr, "about to make temporary device node at %s\n" "\tfor char device maj:%d min:%d\n", buff, maj, min); res = mknod(buff, S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH, makedev(maj, min)); if (res) { if (verbose) perror("open_lin_bsg_device: mknod() failed"); goto close_sysfs; } ret = open(buff, O_RDWR); if (ret < 0) { if (verbose) { perror("open_lin_bsg_device: open() temporary device node failed"); fprintf(stderr, "\t\ttried to open %s\n", buff); } goto close_sysfs; } unlink(buff); /* should actually disappear when process dies or closes 'ret' */ } else { ret = open(buff, O_RDWR); if (ret < 0) { if (verbose) { perror("open_lin_bsg_device: open() device node failed"); fprintf(stderr, "\t\ttried to open %s\n", buff); } goto close_sysfs; } return ret; } close_sysfs: if (fp) fclose(fp); return ret; } int close_lin_bsg_device(int fd) { return close(fd); } /* Returns 0 on success else -1 . */ int send_req_lin_bsg(int fd, int subvalue, struct smp_req_resp * rresp, int verbose) { struct sg_io_v4 hdr; unsigned char cmd[16]; /* unused */ int res; ++subvalue; /* suppress warning */ memset(&hdr, 0, sizeof(hdr)); memset(cmd, 0, sizeof(cmd)); hdr.guard = 'Q'; hdr.protocol = BSG_PROTOCOL_SCSI; hdr.subprotocol = BSG_SUB_PROTOCOL_SCSI_TRANSPORT; hdr.request_len = sizeof(cmd); /* unused */ hdr.request = (uintptr_t) cmd; hdr.dout_xfer_len = rresp->request_len; hdr.dout_xferp = (uintptr_t) rresp->request; hdr.din_xfer_len = rresp->max_response_len; hdr.din_xferp = (uintptr_t) rresp->response; hdr.timeout = DEF_TIMEOUT_MS; if (verbose > 3) fprintf(stderr, "send_req_lin_bsg: dout_xfer_len=%u, din_xfer_len=" "%u, timeout=%u ms\n", hdr.dout_xfer_len, hdr.din_xfer_len, hdr.timeout); res = ioctl(fd, SG_IO, &hdr); if (res) { perror("send_req_lin_bsg: SG_IO ioctl"); return -1; } res = hdr.din_xfer_len - hdr.din_resid; rresp->act_response_len = res; /* was: rresp->act_response_len = -1; */ if (verbose > 3) { fprintf(stderr, "send_req_lin_bsg: driver_status=%u, transport_status=" "%u\n", hdr.driver_status, hdr.transport_status); fprintf(stderr, " device_status=%u, duration=%u, info=%u\n", hdr.device_status, hdr.duration, hdr.info); fprintf(stderr, " din_resid=%d, dout_resid=%d\n", hdr.din_resid, hdr.dout_resid); fprintf(stderr, " smp_req_resp::max_response_len=%d " "act_response_len=%d\n", rresp->max_response_len, res); if ((verbose > 4) && (hdr.din_xfer_len > 0)) { fprintf(stderr, " response (din_resid might exclude CRC):\n"); dStrHex((const char *)rresp->response, (res > 0) ? res : (int)hdr.din_xfer_len, 1); } } if (hdr.driver_status) rresp->transport_err = hdr.driver_status; else if (hdr.transport_status) rresp->transport_err = hdr.transport_status; else if (hdr.device_status) rresp->transport_err = hdr.device_status; return 0; } #endif smp_utils-0.97/README.solaris0000664000175000017500000000037411617405305015027 0ustar douggdouggBuild ----- For general build information see the INSTALL file. Device names ------------ Solaris uses the USMP mechanism to access SAS expanders. SAS expanders have device node names of the form: /dev/smp/expd Douglas Gilbert 6th August 2011 smp_utils-0.97/src/0000755000175000017500000000000011706323060013251 5ustar douggdouggsmp_utils-0.97/src/Makefile.in0000664000175000017500000010434011665236170015333 0ustar douggdougg# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # install binaries in a sbin directory (e.g. /usr/sbin). If there # are utilities that don't need superuser, then they could be # placed in bin_PROGRAMS . VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ sbin_PROGRAMS = smp_conf_general$(EXEEXT) smp_conf_phy_event$(EXEEXT) \ smp_conf_route_info$(EXEEXT) smp_conf_zone_man_pass$(EXEEXT) \ smp_conf_zone_perm_tbl$(EXEEXT) \ smp_conf_zone_phy_info$(EXEEXT) smp_discover$(EXEEXT) \ smp_discover_list$(EXEEXT) smp_ena_dis_zoning$(EXEEXT) \ smp_phy_control$(EXEEXT) smp_phy_test$(EXEEXT) \ smp_read_gpio$(EXEEXT) smp_rep_broadcast$(EXEEXT) \ smp_rep_exp_route_tbl$(EXEEXT) smp_rep_general$(EXEEXT) \ smp_rep_manufacturer$(EXEEXT) smp_rep_phy_err_log$(EXEEXT) \ smp_rep_phy_event$(EXEEXT) smp_rep_phy_event_list$(EXEEXT) \ smp_rep_phy_sata$(EXEEXT) smp_rep_route_info$(EXEEXT) \ smp_rep_self_conf_stat$(EXEEXT) smp_rep_zone_man_pass$(EXEEXT) \ smp_rep_zone_perm_tbl$(EXEEXT) smp_write_gpio$(EXEEXT) \ smp_zone_activate$(EXEEXT) smp_zoned_broadcast$(EXEEXT) \ smp_zone_lock$(EXEEXT) smp_zone_unlock$(EXEEXT) subdir = src DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(sbindir)" PROGRAMS = $(sbin_PROGRAMS) am_smp_conf_general_OBJECTS = smp_conf_general.$(OBJEXT) smp_conf_general_OBJECTS = $(am_smp_conf_general_OBJECTS) smp_conf_general_DEPENDENCIES = ../lib/libsmputils1.la am_smp_conf_phy_event_OBJECTS = smp_conf_phy_event.$(OBJEXT) smp_conf_phy_event_OBJECTS = $(am_smp_conf_phy_event_OBJECTS) smp_conf_phy_event_DEPENDENCIES = ../lib/libsmputils1.la am_smp_conf_route_info_OBJECTS = smp_conf_route_info.$(OBJEXT) smp_conf_route_info_OBJECTS = $(am_smp_conf_route_info_OBJECTS) smp_conf_route_info_DEPENDENCIES = ../lib/libsmputils1.la am_smp_conf_zone_man_pass_OBJECTS = smp_conf_zone_man_pass.$(OBJEXT) smp_conf_zone_man_pass_OBJECTS = $(am_smp_conf_zone_man_pass_OBJECTS) smp_conf_zone_man_pass_DEPENDENCIES = ../lib/libsmputils1.la am_smp_conf_zone_perm_tbl_OBJECTS = smp_conf_zone_perm_tbl.$(OBJEXT) smp_conf_zone_perm_tbl_OBJECTS = $(am_smp_conf_zone_perm_tbl_OBJECTS) smp_conf_zone_perm_tbl_DEPENDENCIES = ../lib/libsmputils1.la am_smp_conf_zone_phy_info_OBJECTS = smp_conf_zone_phy_info.$(OBJEXT) smp_conf_zone_phy_info_OBJECTS = $(am_smp_conf_zone_phy_info_OBJECTS) smp_conf_zone_phy_info_DEPENDENCIES = ../lib/libsmputils1.la am_smp_discover_OBJECTS = smp_discover.$(OBJEXT) smp_discover_OBJECTS = $(am_smp_discover_OBJECTS) smp_discover_DEPENDENCIES = ../lib/libsmputils1.la am_smp_discover_list_OBJECTS = smp_discover_list.$(OBJEXT) smp_discover_list_OBJECTS = $(am_smp_discover_list_OBJECTS) smp_discover_list_DEPENDENCIES = ../lib/libsmputils1.la am_smp_ena_dis_zoning_OBJECTS = smp_ena_dis_zoning.$(OBJEXT) smp_ena_dis_zoning_OBJECTS = $(am_smp_ena_dis_zoning_OBJECTS) smp_ena_dis_zoning_DEPENDENCIES = ../lib/libsmputils1.la am_smp_phy_control_OBJECTS = smp_phy_control.$(OBJEXT) smp_phy_control_OBJECTS = $(am_smp_phy_control_OBJECTS) smp_phy_control_DEPENDENCIES = ../lib/libsmputils1.la am_smp_phy_test_OBJECTS = smp_phy_test.$(OBJEXT) smp_phy_test_OBJECTS = $(am_smp_phy_test_OBJECTS) smp_phy_test_DEPENDENCIES = ../lib/libsmputils1.la am_smp_read_gpio_OBJECTS = smp_read_gpio.$(OBJEXT) smp_read_gpio_OBJECTS = $(am_smp_read_gpio_OBJECTS) smp_read_gpio_DEPENDENCIES = ../lib/libsmputils1.la am_smp_rep_broadcast_OBJECTS = smp_rep_broadcast.$(OBJEXT) smp_rep_broadcast_OBJECTS = $(am_smp_rep_broadcast_OBJECTS) smp_rep_broadcast_DEPENDENCIES = ../lib/libsmputils1.la am_smp_rep_exp_route_tbl_OBJECTS = smp_rep_exp_route_tbl.$(OBJEXT) smp_rep_exp_route_tbl_OBJECTS = $(am_smp_rep_exp_route_tbl_OBJECTS) smp_rep_exp_route_tbl_DEPENDENCIES = ../lib/libsmputils1.la am_smp_rep_general_OBJECTS = smp_rep_general.$(OBJEXT) smp_rep_general_OBJECTS = $(am_smp_rep_general_OBJECTS) smp_rep_general_DEPENDENCIES = ../lib/libsmputils1.la am_smp_rep_manufacturer_OBJECTS = smp_rep_manufacturer.$(OBJEXT) smp_rep_manufacturer_OBJECTS = $(am_smp_rep_manufacturer_OBJECTS) smp_rep_manufacturer_DEPENDENCIES = ../lib/libsmputils1.la am_smp_rep_phy_err_log_OBJECTS = smp_rep_phy_err_log.$(OBJEXT) smp_rep_phy_err_log_OBJECTS = $(am_smp_rep_phy_err_log_OBJECTS) smp_rep_phy_err_log_DEPENDENCIES = ../lib/libsmputils1.la am_smp_rep_phy_event_OBJECTS = smp_rep_phy_event.$(OBJEXT) smp_rep_phy_event_OBJECTS = $(am_smp_rep_phy_event_OBJECTS) smp_rep_phy_event_DEPENDENCIES = ../lib/libsmputils1.la am_smp_rep_phy_event_list_OBJECTS = smp_rep_phy_event_list.$(OBJEXT) smp_rep_phy_event_list_OBJECTS = $(am_smp_rep_phy_event_list_OBJECTS) smp_rep_phy_event_list_DEPENDENCIES = ../lib/libsmputils1.la am_smp_rep_phy_sata_OBJECTS = smp_rep_phy_sata.$(OBJEXT) smp_rep_phy_sata_OBJECTS = $(am_smp_rep_phy_sata_OBJECTS) smp_rep_phy_sata_DEPENDENCIES = ../lib/libsmputils1.la am_smp_rep_route_info_OBJECTS = smp_rep_route_info.$(OBJEXT) smp_rep_route_info_OBJECTS = $(am_smp_rep_route_info_OBJECTS) smp_rep_route_info_DEPENDENCIES = ../lib/libsmputils1.la am_smp_rep_self_conf_stat_OBJECTS = smp_rep_self_conf_stat.$(OBJEXT) smp_rep_self_conf_stat_OBJECTS = $(am_smp_rep_self_conf_stat_OBJECTS) smp_rep_self_conf_stat_DEPENDENCIES = ../lib/libsmputils1.la am_smp_rep_zone_man_pass_OBJECTS = smp_rep_zone_man_pass.$(OBJEXT) smp_rep_zone_man_pass_OBJECTS = $(am_smp_rep_zone_man_pass_OBJECTS) smp_rep_zone_man_pass_DEPENDENCIES = ../lib/libsmputils1.la am_smp_rep_zone_perm_tbl_OBJECTS = smp_rep_zone_perm_tbl.$(OBJEXT) smp_rep_zone_perm_tbl_OBJECTS = $(am_smp_rep_zone_perm_tbl_OBJECTS) smp_rep_zone_perm_tbl_DEPENDENCIES = ../lib/libsmputils1.la am_smp_write_gpio_OBJECTS = smp_write_gpio.$(OBJEXT) smp_write_gpio_OBJECTS = $(am_smp_write_gpio_OBJECTS) smp_write_gpio_DEPENDENCIES = ../lib/libsmputils1.la am_smp_zone_activate_OBJECTS = smp_zone_activate.$(OBJEXT) smp_zone_activate_OBJECTS = $(am_smp_zone_activate_OBJECTS) smp_zone_activate_DEPENDENCIES = ../lib/libsmputils1.la am_smp_zone_lock_OBJECTS = smp_zone_lock.$(OBJEXT) smp_zone_lock_OBJECTS = $(am_smp_zone_lock_OBJECTS) smp_zone_lock_DEPENDENCIES = ../lib/libsmputils1.la am_smp_zone_unlock_OBJECTS = smp_zone_unlock.$(OBJEXT) smp_zone_unlock_OBJECTS = $(am_smp_zone_unlock_OBJECTS) smp_zone_unlock_DEPENDENCIES = ../lib/libsmputils1.la am_smp_zoned_broadcast_OBJECTS = smp_zoned_broadcast.$(OBJEXT) smp_zoned_broadcast_OBJECTS = $(am_smp_zoned_broadcast_OBJECTS) smp_zoned_broadcast_DEPENDENCIES = ../lib/libsmputils1.la DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(smp_conf_general_SOURCES) $(smp_conf_phy_event_SOURCES) \ $(smp_conf_route_info_SOURCES) \ $(smp_conf_zone_man_pass_SOURCES) \ $(smp_conf_zone_perm_tbl_SOURCES) \ $(smp_conf_zone_phy_info_SOURCES) $(smp_discover_SOURCES) \ $(smp_discover_list_SOURCES) $(smp_ena_dis_zoning_SOURCES) \ $(smp_phy_control_SOURCES) $(smp_phy_test_SOURCES) \ $(smp_read_gpio_SOURCES) $(smp_rep_broadcast_SOURCES) \ $(smp_rep_exp_route_tbl_SOURCES) $(smp_rep_general_SOURCES) \ $(smp_rep_manufacturer_SOURCES) $(smp_rep_phy_err_log_SOURCES) \ $(smp_rep_phy_event_SOURCES) $(smp_rep_phy_event_list_SOURCES) \ $(smp_rep_phy_sata_SOURCES) $(smp_rep_route_info_SOURCES) \ $(smp_rep_self_conf_stat_SOURCES) \ $(smp_rep_zone_man_pass_SOURCES) \ $(smp_rep_zone_perm_tbl_SOURCES) $(smp_write_gpio_SOURCES) \ $(smp_zone_activate_SOURCES) $(smp_zone_lock_SOURCES) \ $(smp_zone_unlock_SOURCES) $(smp_zoned_broadcast_SOURCES) DIST_SOURCES = $(smp_conf_general_SOURCES) \ $(smp_conf_phy_event_SOURCES) $(smp_conf_route_info_SOURCES) \ $(smp_conf_zone_man_pass_SOURCES) \ $(smp_conf_zone_perm_tbl_SOURCES) \ $(smp_conf_zone_phy_info_SOURCES) $(smp_discover_SOURCES) \ $(smp_discover_list_SOURCES) $(smp_ena_dis_zoning_SOURCES) \ $(smp_phy_control_SOURCES) $(smp_phy_test_SOURCES) \ $(smp_read_gpio_SOURCES) $(smp_rep_broadcast_SOURCES) \ $(smp_rep_exp_route_tbl_SOURCES) $(smp_rep_general_SOURCES) \ $(smp_rep_manufacturer_SOURCES) $(smp_rep_phy_err_log_SOURCES) \ $(smp_rep_phy_event_SOURCES) $(smp_rep_phy_event_list_SOURCES) \ $(smp_rep_phy_sata_SOURCES) $(smp_rep_route_info_SOURCES) \ $(smp_rep_self_conf_stat_SOURCES) \ $(smp_rep_zone_man_pass_SOURCES) \ $(smp_rep_zone_perm_tbl_SOURCES) $(smp_write_gpio_SOURCES) \ $(smp_zone_activate_SOURCES) $(smp_zone_lock_SOURCES) \ $(smp_zone_unlock_SOURCES) $(smp_zoned_broadcast_SOURCES) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ SMPUTILS_LIBS = @SMPUTILS_LIBS@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ os_deps = @os_deps@ os_libs = @os_libs@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AM_CFLAGS = -I ../include -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -W # AM_CFLAGS = -I ../include -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -W -pedantic -std=c99 smp_conf_general_SOURCES = smp_conf_general.c smp_conf_general_LDADD = ../lib/libsmputils1.la @os_libs@ smp_conf_phy_event_SOURCES = smp_conf_phy_event.c smp_conf_phy_event_LDADD = ../lib/libsmputils1.la @os_libs@ smp_conf_route_info_SOURCES = smp_conf_route_info.c smp_conf_route_info_LDADD = ../lib/libsmputils1.la @os_libs@ smp_conf_zone_man_pass_SOURCES = smp_conf_zone_man_pass.c smp_conf_zone_man_pass_LDADD = ../lib/libsmputils1.la @os_libs@ smp_conf_zone_perm_tbl_SOURCES = smp_conf_zone_perm_tbl.c smp_conf_zone_perm_tbl_LDADD = ../lib/libsmputils1.la @os_libs@ smp_conf_zone_phy_info_SOURCES = smp_conf_zone_phy_info.c smp_conf_zone_phy_info_LDADD = ../lib/libsmputils1.la @os_libs@ smp_discover_SOURCES = smp_discover.c smp_discover_LDADD = ../lib/libsmputils1.la @os_libs@ smp_discover_list_SOURCES = smp_discover_list.c smp_discover_list_LDADD = ../lib/libsmputils1.la @os_libs@ smp_ena_dis_zoning_SOURCES = smp_ena_dis_zoning.c smp_ena_dis_zoning_LDADD = ../lib/libsmputils1.la @os_libs@ smp_phy_control_SOURCES = smp_phy_control.c smp_phy_control_LDADD = ../lib/libsmputils1.la @os_libs@ smp_phy_test_SOURCES = smp_phy_test.c smp_phy_test_LDADD = ../lib/libsmputils1.la @os_libs@ smp_read_gpio_SOURCES = smp_read_gpio.c smp_read_gpio_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_broadcast_SOURCES = smp_rep_broadcast.c smp_rep_broadcast_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_exp_route_tbl_SOURCES = smp_rep_exp_route_tbl.c smp_rep_exp_route_tbl_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_general_SOURCES = smp_rep_general.c smp_rep_general_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_manufacturer_SOURCES = smp_rep_manufacturer.c smp_rep_manufacturer_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_phy_err_log_SOURCES = smp_rep_phy_err_log.c smp_rep_phy_err_log_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_phy_event_SOURCES = smp_rep_phy_event.c smp_rep_phy_event_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_phy_event_list_SOURCES = smp_rep_phy_event_list.c smp_rep_phy_event_list_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_phy_sata_SOURCES = smp_rep_phy_sata.c smp_rep_phy_sata_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_route_info_SOURCES = smp_rep_route_info.c smp_rep_route_info_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_self_conf_stat_SOURCES = smp_rep_self_conf_stat.c smp_rep_self_conf_stat_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_zone_man_pass_SOURCES = smp_rep_zone_man_pass.c smp_rep_zone_man_pass_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_zone_perm_tbl_SOURCES = smp_rep_zone_perm_tbl.c smp_rep_zone_perm_tbl_LDADD = ../lib/libsmputils1.la @os_libs@ smp_write_gpio_SOURCES = smp_write_gpio.c smp_write_gpio_LDADD = ../lib/libsmputils1.la @os_libs@ smp_zone_activate_SOURCES = smp_zone_activate.c smp_zone_activate_LDADD = ../lib/libsmputils1.la @os_libs@ smp_zoned_broadcast_SOURCES = smp_zoned_broadcast.c smp_zoned_broadcast_LDADD = ../lib/libsmputils1.la @os_libs@ smp_zone_lock_SOURCES = smp_zone_lock.c smp_zone_lock_LDADD = ../lib/libsmputils1.la @os_libs@ smp_zone_unlock_SOURCES = smp_zone_unlock.c smp_zone_unlock_LDADD = ../lib/libsmputils1.la @os_libs@ all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu src/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-sbinPROGRAMS: $(sbin_PROGRAMS) @$(NORMAL_INSTALL) test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)" @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p || test -f $$p1; \ then echo "$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) files[d] = files[d] " " $$1; \ else { print "f", $$3 "/" $$4, $$1; } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \ } \ ; done uninstall-sbinPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ -e 's/$$/$(EXEEXT)/' `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(sbindir)" && rm -f $$files clean-sbinPROGRAMS: @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list smp_conf_general$(EXEEXT): $(smp_conf_general_OBJECTS) $(smp_conf_general_DEPENDENCIES) @rm -f smp_conf_general$(EXEEXT) $(LINK) $(smp_conf_general_OBJECTS) $(smp_conf_general_LDADD) $(LIBS) smp_conf_phy_event$(EXEEXT): $(smp_conf_phy_event_OBJECTS) $(smp_conf_phy_event_DEPENDENCIES) @rm -f smp_conf_phy_event$(EXEEXT) $(LINK) $(smp_conf_phy_event_OBJECTS) $(smp_conf_phy_event_LDADD) $(LIBS) smp_conf_route_info$(EXEEXT): $(smp_conf_route_info_OBJECTS) $(smp_conf_route_info_DEPENDENCIES) @rm -f smp_conf_route_info$(EXEEXT) $(LINK) $(smp_conf_route_info_OBJECTS) $(smp_conf_route_info_LDADD) $(LIBS) smp_conf_zone_man_pass$(EXEEXT): $(smp_conf_zone_man_pass_OBJECTS) $(smp_conf_zone_man_pass_DEPENDENCIES) @rm -f smp_conf_zone_man_pass$(EXEEXT) $(LINK) $(smp_conf_zone_man_pass_OBJECTS) $(smp_conf_zone_man_pass_LDADD) $(LIBS) smp_conf_zone_perm_tbl$(EXEEXT): $(smp_conf_zone_perm_tbl_OBJECTS) $(smp_conf_zone_perm_tbl_DEPENDENCIES) @rm -f smp_conf_zone_perm_tbl$(EXEEXT) $(LINK) $(smp_conf_zone_perm_tbl_OBJECTS) $(smp_conf_zone_perm_tbl_LDADD) $(LIBS) smp_conf_zone_phy_info$(EXEEXT): $(smp_conf_zone_phy_info_OBJECTS) $(smp_conf_zone_phy_info_DEPENDENCIES) @rm -f smp_conf_zone_phy_info$(EXEEXT) $(LINK) $(smp_conf_zone_phy_info_OBJECTS) $(smp_conf_zone_phy_info_LDADD) $(LIBS) smp_discover$(EXEEXT): $(smp_discover_OBJECTS) $(smp_discover_DEPENDENCIES) @rm -f smp_discover$(EXEEXT) $(LINK) $(smp_discover_OBJECTS) $(smp_discover_LDADD) $(LIBS) smp_discover_list$(EXEEXT): $(smp_discover_list_OBJECTS) $(smp_discover_list_DEPENDENCIES) @rm -f smp_discover_list$(EXEEXT) $(LINK) $(smp_discover_list_OBJECTS) $(smp_discover_list_LDADD) $(LIBS) smp_ena_dis_zoning$(EXEEXT): $(smp_ena_dis_zoning_OBJECTS) $(smp_ena_dis_zoning_DEPENDENCIES) @rm -f smp_ena_dis_zoning$(EXEEXT) $(LINK) $(smp_ena_dis_zoning_OBJECTS) $(smp_ena_dis_zoning_LDADD) $(LIBS) smp_phy_control$(EXEEXT): $(smp_phy_control_OBJECTS) $(smp_phy_control_DEPENDENCIES) @rm -f smp_phy_control$(EXEEXT) $(LINK) $(smp_phy_control_OBJECTS) $(smp_phy_control_LDADD) $(LIBS) smp_phy_test$(EXEEXT): $(smp_phy_test_OBJECTS) $(smp_phy_test_DEPENDENCIES) @rm -f smp_phy_test$(EXEEXT) $(LINK) $(smp_phy_test_OBJECTS) $(smp_phy_test_LDADD) $(LIBS) smp_read_gpio$(EXEEXT): $(smp_read_gpio_OBJECTS) $(smp_read_gpio_DEPENDENCIES) @rm -f smp_read_gpio$(EXEEXT) $(LINK) $(smp_read_gpio_OBJECTS) $(smp_read_gpio_LDADD) $(LIBS) smp_rep_broadcast$(EXEEXT): $(smp_rep_broadcast_OBJECTS) $(smp_rep_broadcast_DEPENDENCIES) @rm -f smp_rep_broadcast$(EXEEXT) $(LINK) $(smp_rep_broadcast_OBJECTS) $(smp_rep_broadcast_LDADD) $(LIBS) smp_rep_exp_route_tbl$(EXEEXT): $(smp_rep_exp_route_tbl_OBJECTS) $(smp_rep_exp_route_tbl_DEPENDENCIES) @rm -f smp_rep_exp_route_tbl$(EXEEXT) $(LINK) $(smp_rep_exp_route_tbl_OBJECTS) $(smp_rep_exp_route_tbl_LDADD) $(LIBS) smp_rep_general$(EXEEXT): $(smp_rep_general_OBJECTS) $(smp_rep_general_DEPENDENCIES) @rm -f smp_rep_general$(EXEEXT) $(LINK) $(smp_rep_general_OBJECTS) $(smp_rep_general_LDADD) $(LIBS) smp_rep_manufacturer$(EXEEXT): $(smp_rep_manufacturer_OBJECTS) $(smp_rep_manufacturer_DEPENDENCIES) @rm -f smp_rep_manufacturer$(EXEEXT) $(LINK) $(smp_rep_manufacturer_OBJECTS) $(smp_rep_manufacturer_LDADD) $(LIBS) smp_rep_phy_err_log$(EXEEXT): $(smp_rep_phy_err_log_OBJECTS) $(smp_rep_phy_err_log_DEPENDENCIES) @rm -f smp_rep_phy_err_log$(EXEEXT) $(LINK) $(smp_rep_phy_err_log_OBJECTS) $(smp_rep_phy_err_log_LDADD) $(LIBS) smp_rep_phy_event$(EXEEXT): $(smp_rep_phy_event_OBJECTS) $(smp_rep_phy_event_DEPENDENCIES) @rm -f smp_rep_phy_event$(EXEEXT) $(LINK) $(smp_rep_phy_event_OBJECTS) $(smp_rep_phy_event_LDADD) $(LIBS) smp_rep_phy_event_list$(EXEEXT): $(smp_rep_phy_event_list_OBJECTS) $(smp_rep_phy_event_list_DEPENDENCIES) @rm -f smp_rep_phy_event_list$(EXEEXT) $(LINK) $(smp_rep_phy_event_list_OBJECTS) $(smp_rep_phy_event_list_LDADD) $(LIBS) smp_rep_phy_sata$(EXEEXT): $(smp_rep_phy_sata_OBJECTS) $(smp_rep_phy_sata_DEPENDENCIES) @rm -f smp_rep_phy_sata$(EXEEXT) $(LINK) $(smp_rep_phy_sata_OBJECTS) $(smp_rep_phy_sata_LDADD) $(LIBS) smp_rep_route_info$(EXEEXT): $(smp_rep_route_info_OBJECTS) $(smp_rep_route_info_DEPENDENCIES) @rm -f smp_rep_route_info$(EXEEXT) $(LINK) $(smp_rep_route_info_OBJECTS) $(smp_rep_route_info_LDADD) $(LIBS) smp_rep_self_conf_stat$(EXEEXT): $(smp_rep_self_conf_stat_OBJECTS) $(smp_rep_self_conf_stat_DEPENDENCIES) @rm -f smp_rep_self_conf_stat$(EXEEXT) $(LINK) $(smp_rep_self_conf_stat_OBJECTS) $(smp_rep_self_conf_stat_LDADD) $(LIBS) smp_rep_zone_man_pass$(EXEEXT): $(smp_rep_zone_man_pass_OBJECTS) $(smp_rep_zone_man_pass_DEPENDENCIES) @rm -f smp_rep_zone_man_pass$(EXEEXT) $(LINK) $(smp_rep_zone_man_pass_OBJECTS) $(smp_rep_zone_man_pass_LDADD) $(LIBS) smp_rep_zone_perm_tbl$(EXEEXT): $(smp_rep_zone_perm_tbl_OBJECTS) $(smp_rep_zone_perm_tbl_DEPENDENCIES) @rm -f smp_rep_zone_perm_tbl$(EXEEXT) $(LINK) $(smp_rep_zone_perm_tbl_OBJECTS) $(smp_rep_zone_perm_tbl_LDADD) $(LIBS) smp_write_gpio$(EXEEXT): $(smp_write_gpio_OBJECTS) $(smp_write_gpio_DEPENDENCIES) @rm -f smp_write_gpio$(EXEEXT) $(LINK) $(smp_write_gpio_OBJECTS) $(smp_write_gpio_LDADD) $(LIBS) smp_zone_activate$(EXEEXT): $(smp_zone_activate_OBJECTS) $(smp_zone_activate_DEPENDENCIES) @rm -f smp_zone_activate$(EXEEXT) $(LINK) $(smp_zone_activate_OBJECTS) $(smp_zone_activate_LDADD) $(LIBS) smp_zone_lock$(EXEEXT): $(smp_zone_lock_OBJECTS) $(smp_zone_lock_DEPENDENCIES) @rm -f smp_zone_lock$(EXEEXT) $(LINK) $(smp_zone_lock_OBJECTS) $(smp_zone_lock_LDADD) $(LIBS) smp_zone_unlock$(EXEEXT): $(smp_zone_unlock_OBJECTS) $(smp_zone_unlock_DEPENDENCIES) @rm -f smp_zone_unlock$(EXEEXT) $(LINK) $(smp_zone_unlock_OBJECTS) $(smp_zone_unlock_LDADD) $(LIBS) smp_zoned_broadcast$(EXEEXT): $(smp_zoned_broadcast_OBJECTS) $(smp_zoned_broadcast_DEPENDENCIES) @rm -f smp_zoned_broadcast$(EXEEXT) $(LINK) $(smp_zoned_broadcast_OBJECTS) $(smp_zoned_broadcast_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_conf_general.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_conf_phy_event.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_conf_route_info.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_conf_zone_man_pass.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_conf_zone_perm_tbl.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_conf_zone_phy_info.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_discover.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_discover_list.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_ena_dis_zoning.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_phy_control.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_phy_test.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_read_gpio.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_rep_broadcast.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_rep_exp_route_tbl.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_rep_general.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_rep_manufacturer.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_rep_phy_err_log.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_rep_phy_event.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_rep_phy_event_list.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_rep_phy_sata.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_rep_route_info.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_rep_self_conf_stat.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_rep_zone_man_pass.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_rep_zone_perm_tbl.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_write_gpio.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_zone_activate.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_zone_lock.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_zone_unlock.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smp_zoned_broadcast.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(PROGRAMS) installdirs: for dir in "$(DESTDIR)$(sbindir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-sbinPROGRAMS \ mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-sbinPROGRAMS install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-sbinPROGRAMS .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libtool clean-sbinPROGRAMS ctags distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-sbinPROGRAMS install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags uninstall uninstall-am uninstall-sbinPROGRAMS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: smp_utils-0.97/src/smp_zoned_broadcast.c0000664000175000017500000004165311675012613017454 0ustar douggdougg/* * Copyright (c) 2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a ZONED BROADCAST function and outputs its response. */ static char * version_str = "1.02 20111222"; static struct option long_options[] = { {"broadcast", 1, 0, 'b'}, {"expected", 1, 0, 'E'}, {"fszg", 1, 0, 'F'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"interface", 1, 0, 'I'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"szg", 1, 0, 'S'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_zoned_broadcast [--broadcast=BT] [--expected=EX] " "[--fszg=FS]\n" " [--help] [--hex] [--interface=PARAMS] " "[--raw]\n" " [--sa=SAS_ADDR] [--szg=ZGL] " "[--verbose]\n" " [--version] SMP_DEVICE[,N]\n" " where:\n" " --broadcast=BT|-b BT BT is type of broadcast (def: 0 " "which is\n" " Broadcast(Change))\n" " --expected=EX|-E EX set expected expander change " "count to EX\n" " --fszg=FS|-F FS file FS contains one or more source " "zone groups\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending\n" " on the interface, may not be " "needed\n" " --szg=ZGL|-S ZGL ZGL is a comma separated list of " "source\n" " zone groups for broadcast\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP ZONED BROADCAST function. Source zone groups " "can be given\nin decimal (default) or hex with a '0x' prefix " " or a 'h' suffix.\nBroadcast(Change) will cause an SMP " "initiator to run its discover process.\n" ); } /* Read ASCII decimal bytes from fname (a file named '-' taken as stdin). * There should be either one entry per line or a comma, space or tab * separated list of bytes. By default decimal values are expected in * the range from 0 to 255. With a "0x" prefix or a 'h' suffix hex values * can be given in the range from 0x to 0xff. Everything from and * including a '#' on a line is ignored. Returns 0 if ok, or 1 if error. */ static int fd2hex_arr(const char * fname, unsigned char * mp_arr, int * mp_arr_len, int max_arr_len) { int fn_len, in_len, k, j, m; int h; const char * lcp; FILE * fp; char line[512]; int off = 0; if ((NULL == fname) || (NULL == mp_arr) || (NULL == mp_arr_len)) return 1; fn_len = strlen(fname); if (0 == fn_len) return 1; if ((1 == fn_len) && ('-' == fname[0])) /* read from stdin */ fp = stdin; else { fp = fopen(fname, "r"); if (NULL == fp) { fprintf(stderr, "Unable to open %s for reading\n", fname); return 1; } } for (j = 0; j < 512; ++j) { if (NULL == fgets(line, sizeof(line), fp)) break; in_len = strlen(line); if (in_len > 0) { if ('\n' == line[in_len - 1]) { --in_len; line[in_len] = '\0'; } } if (0 == in_len) continue; lcp = line; m = strspn(lcp, " \t"); if (m == in_len) continue; lcp += m; in_len -= m; if ('#' == *lcp) continue; k = strspn(lcp, "0123456789aAbBcCdDeEfFxXhH ,\t"); if ((k < in_len) && ('#' != lcp[k])) { fprintf(stderr, "fd2hex_arr: syntax error at " "line %d, pos %d\n", j + 1, m + k + 1); goto bad; } for (k = 0; k < 1024; ++k) { h = smp_get_dhnum(lcp); if ((h >= 0) && (h < 256)) { if (h > 0xff) { fprintf(stderr, "fd2hex_arr: hex number " "larger than 0xff in line %d, pos %d\n", j + 1, (int)(lcp - line + 1)); goto bad; } if ((off + k) >= max_arr_len) { fprintf(stderr, "fd2hex_arr: array length " "exceeded\n"); goto bad; } mp_arr[off + k] = h; if (! isxdigit(*lcp)) { lcp += strspn(lcp, " ,\t"); } lcp = strpbrk(lcp, " ,\t"); if (NULL == lcp) break; lcp += strspn(lcp, " ,\t"); if ('\0' == *lcp) break; } else { if ('#' == *lcp) { --k; break; } fprintf(stderr, "fd2hex_arr: error in " "line %d, at pos %d\n", j + 1, (int)(lcp - line + 1)); goto bad; } } off += (k + 1); } *mp_arr_len = off; fclose(fp); return 0; bad: fclose(fp); return 1; } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, len, n, act_resplen; int expected_cc = 0; const char * fszg = NULL; const char * zgl = NULL; int do_hex = 0; int btype = 0; int do_raw = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[1028]; unsigned char smp_resp[8]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; int subvalue = 0; char * cp; int ret = 0; memset(smp_req, 0, sizeof smp_req); memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "b:E:F:hHI:rs:S:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'b': btype = smp_get_dhnum(optarg); if ((btype < 0) || (btype > 15)) { fprintf(stderr, "bad argument to '--broadcast'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'E': expected_cc = smp_get_num(optarg); if ((expected_cc < 0) || (expected_cc > 65535)) { fprintf(stderr, "bad argument to '--expected'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'F': fszg = optarg; break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'S': zgl = optarg; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } len = 0; if (fszg) { if (zgl) { fprintf(stderr, "can't have both --fszg and --szg " "options\n"); return SMP_LIB_SYNTAX_ERROR; } if (fd2hex_arr(fszg, smp_req + 8, &len, 255)) { fprintf(stderr, "failed decoding --fszg=FS option\n"); return SMP_LIB_SYNTAX_ERROR; } } else if (zgl) { for (k = 0; k < 256; ++k) { n = smp_get_dhnum(zgl); if ((n < 0) || (n > 255)) { fprintf(stderr, "failed decoding --szg=ZGL option\n"); return SMP_LIB_SYNTAX_ERROR; } smp_req[8 + k] = n; cp = strchr(zgl, ','); if (NULL == cp) break; zgl = cp + 1; } if (k > 255) { fprintf(stderr, "failed decoding --szg option, max " "255 source zone groups\n"); return SMP_LIB_SYNTAX_ERROR; } else len = k + 1; } if (0 == len) { fprintf(stderr, "didn't detect any source zone group numbers " "in the input.\n"); fprintf(stderr, "Give --szg=ZGL or --fszg=FS option (e.g. " "'--szg=1')\n"); return SMP_LIB_SYNTAX_ERROR; } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; smp_req[0] = SMP_FRAME_TYPE_REQ; smp_req[1] = SMP_FN_ZONED_BROADCAST, smp_req[4] = (expected_cc >> 8) & 0xff; smp_req[5] = expected_cc & 0xff; smp_req[6] = btype & 0xf; smp_req[7] = len; if ((len % 4)) len = ((len / 4) + 1) * 4; smp_req[3] = (len / 4) + 1; n = len + 8 + 4; if (verbose) { fprintf(stderr, " Zoned broadcast request:"); for (k = 0; k < n; ++k) { if (0 == (k % 16)) fprintf(stderr, "\n "); else if (0 == (k % 8)) fprintf(stderr, " "); fprintf(stderr, "%02x ", smp_req[k]); } fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = n; smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[2]) { if (verbose) fprintf(stderr, "Zoned broadcast result: %s\n", smp_get_func_res_str(smp_resp[2], sizeof(b), b)); ret = smp_resp[2]; } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Zoned broadcast result: %s\n", cp); ret = smp_resp[2]; goto err_out; } err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_rep_zone_man_pass.c0000664000175000017500000003174211675012613020013 0ustar douggdougg/* * Copyright (c) 2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a REPORT ZONE MANAGER PASSWORD function and outputs its * response. */ static char * version_str = "1.02 20111222"; #define SMP_FN_REPORT_ZONE_MAN_PASS_RESP_LEN (40 + 4) static struct option long_options[] = { {"fpass", 1, 0, 'F'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"interface", 1, 0, 'I'}, {"phex", 0, 0, 'p'}, {"raw", 0, 0, 'r'}, {"report", 1, 0, 'R'}, {"sa", 1, 0, 's'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_rep_zone_man_pass [--fpass=FP] [--help] [--hex]\n" " [--interface=PARAMS] [--phex] " "[--raw]\n" " [--report=RT] [--sa=SAS_ADDR] " "[--verbose]\n" " [--version] SMP_DEVICE[,N]\n" " where:\n" " --fpass=FP|-F FP FP is file to write password to\n" " (default: stdout)\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --phex|-p output password (only) in hex\n" " (default: ASCII between single quotes)\n" " --raw|-r output response in binary\n" " --report=RT|-R RT report type: 0 (default) -> current\n" " 2 -> saved; 3 -> default manager " "password\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP REPORT ZONE MANAGER PASSWORD function\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, len, act_resplen; const char * fpass = NULL; int do_hex = 0; int do_phex = 0; int do_raw = 0; int rtype = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_REPORT_ZONE_MANAGER_PASS, 9, 1, 0, 0, 0, 0, 0, 0, 0, 0}; unsigned char smp_resp[SMP_FN_REPORT_ZONE_MAN_PASS_RESP_LEN]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; int subvalue = 0; char * cp; FILE * foutp = stdout; int ret = 0; memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "F:hHI:prR:s:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'F': fpass = optarg; break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'p': ++do_phex; break; case 'r': ++do_raw; break; case 'R': rtype = smp_get_num(optarg); if ((rtype < 0) || (rtype > 3)) { fprintf(stderr, "bad argument to '--report=', expect 0 to " "3\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; len = (sizeof(smp_resp) - 8) / 4; smp_req[2] = (len < 0x100) ? len : 0xff; /* Allocated Response Len */ smp_req[4] = rtype & 0x3; if (verbose) { fprintf(stderr, " Report zone manager password request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) fprintf(stderr, "%02x ", smp_req[k]); fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; if (smp_resp[2]) { ret = smp_resp[2]; if (verbose) fprintf(stderr, "Report zone manager password result: %s\n", smp_get_func_res_str(ret, sizeof(b), b)); } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Report zone manager password result: %s\n", cp); ret = smp_resp[2]; goto err_out; } if (fpass) { if ((1 == strlen(fpass)) && (0 == strcmp("-", fpass))) ; /* accept "-" as synonym for stdout */ else { foutp = fopen(fpass, "w"); if (NULL == foutp) { fprintf(stderr, "unable to open %s, error: %s\n", fpass, safe_strerror(errno)); ret = SMP_LIB_FILE_ERROR; goto err_out; } } } if (fpass) { fprintf(foutp, "# Report zone manager password response:\n"); res = (smp_resp[4] << 8) + smp_resp[5]; if (verbose || res) fprintf(foutp, "# Expander change count: %d\n", res); fprintf(foutp, "# Report type: %d\n", smp_resp[6] & 0x3); } if (do_phex) { for (k = 0; k < 32; ++k) { if (0 == k) fprintf(foutp, "%x", smp_resp[8 + k]); else fprintf(foutp, ",%x", smp_resp[8 + k]); } fprintf(foutp, "\n"); } else { len = strlen((const char *)(smp_resp + 8)); fprintf(foutp, "'%.*s'\n", len, smp_resp + 8); } err_out: if (foutp && (stdout != foutp)) { fclose(foutp); foutp = NULL; } res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_rep_route_info.c0000664000175000017500000004032511675012613017325 0ustar douggdougg/* * Copyright (c) 2006-2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a REPORT ROUTE INFORMATION function and outputs its * response. */ static char * version_str = "1.09 20111222"; #define REP_ROUTE_INFO_RESP_LEN 44 static struct option long_options[] = { {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"index", 1, 0, 'i'}, {"interface", 1, 0, 'I'}, {"multiple", 0, 0, 'm'}, {"num", 1, 0, 'n'}, {"phy", 1, 0, 'p'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {"zero", 0, 0, 'z'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_rep_route_info [--help] [--hex] [--index=IN] " "[--interface=PARAMS]\n" " [--multiple] [--num=NUM] [--phy=ID] " "[--raw]\n" " [--sa=SAS_ADDR] [--verbose] " "[--version]\n" " [--zero] SMP_DEVICE[,N]\n" " where:\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --index=IN|-i IN expander route index (def: 0)\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --multiple|-m query multiple indexes, output 1 " "line for each\n" " --num=NUM|-n NUM number of indexes to examine when '-m' " "is given\n" " --phy=ID|-p ID phy identifier (def: 0)\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n" " --zero|-z zero Allocated Response Length " "field,\n" " may be required prior to SAS-2\n\n" "Performs a SMP REPORT ROUTE INFORMATION function\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } /* Returns 0 for success and sets *resp_len to length of response in * bytes excluding trailing CRC. Returns SMP_LIB errors or * -1 for other errors. */ static int do_rep_route(struct smp_target_obj * top, int phy_id, int index, unsigned char * resp, int max_resp_len, int * resp_len, int do_zero, int do_hex, int do_raw, int verbose) { unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_REPORT_ROUTE_INFO, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; struct smp_req_resp smp_rr; char b[256]; char * cp; int len, res, k, act_resplen; if (! do_zero) { /* SAS-2 or later */ len = (max_resp_len - 8) / 4; smp_req[2] = (len < 0x100) ? len : 0xff; /* Allocated Response Len */ smp_req[3] = 2; /* Request Length: in dwords */ } smp_req[6] = (index >> 8) & 0xff; smp_req[7] = index & 0xff; smp_req[9] = phy_id; if (verbose) { fprintf(stderr, " Report route information request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) fprintf(stderr, "%02x ", smp_req[k]); fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = max_resp_len; smp_rr.response = resp; res = smp_send_req(top, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); return -1; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); return -1; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); return SMP_LIB_CAT_MALFORMED; } len = resp[3]; if ((0 == len) && (0 == resp[2])) { len = smp_get_func_def_resp_len(resp[1]); if (len < 0) { len = 0; if (verbose > 1) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)resp, len, 1); else dStrRaw((const char *)resp, len); if (SMP_FRAME_TYPE_RESP != resp[0]) return SMP_LIB_CAT_MALFORMED; if (resp[1] != smp_req[1]) return SMP_LIB_CAT_MALFORMED; if (resp[2]) { if (verbose) fprintf(stderr, "Report route information result: %s\n", smp_get_func_res_str(resp[2], sizeof(b), b)); return resp[2]; } if (resp_len) *resp_len = len; return 0; } if (SMP_FRAME_TYPE_RESP != resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", resp[0]); return SMP_LIB_CAT_MALFORMED; } if (resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], resp[1]); return SMP_LIB_CAT_MALFORMED; } if (resp[2]) { if (verbose > 0) { cp = smp_get_func_res_str(resp[2], sizeof(b), b); fprintf(stderr, "Report route information result: %s\n", cp); } return resp[2]; } if (resp_len) *resp_len = len; return 0; } #define MAX_NUM_INDEXES 16384 #define MAX_ADJACENT_DISABLED 4 static int do_multiple(struct smp_target_obj * top, int phy_id, int index, int num_ind, int do_zero, int do_hex, int do_raw, int verbose) { unsigned char smp_resp[REP_ROUTE_INFO_RESP_LEN]; unsigned long long ull; int res, len, j, k, num, disabled, adj_dis; int first = 1; num = num_ind ? (index + num_ind) : MAX_NUM_INDEXES; for (adj_dis = 0, k = index; k < num; ++k) { res = do_rep_route(top, phy_id, k, smp_resp, sizeof(smp_resp), &len, do_zero, do_hex, do_raw, verbose); if (SMP_FRES_NO_INDEX == res) return 0; /* expected, end condition */ if (res) return res; if (first && (! do_raw)) { first = 0; printf("Route table for phy_id: %d\n", phy_id); } if (do_hex || do_raw) continue; disabled = !!(smp_resp[12] & 0x80); if ((0 == num_ind) && disabled) { if (++adj_dis >= MAX_ADJACENT_DISABLED) { if (verbose > 2) fprintf(stderr, "number of 'adjacent disables' exceeded " "at index=%d\n", k); break; } } if (disabled) continue; adj_dis = 0; ull = 0; for (j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= smp_resp[16 + j]; } printf(" Index: %d Routed SAS address: 0x%llx\n", k, ull); } return 0; } static int do_single(struct smp_target_obj * top, int phy_id, int index, int do_zero, int do_hex, int do_raw, int verbose) { unsigned char smp_resp[REP_ROUTE_INFO_RESP_LEN]; unsigned long long ull; int res, len, j; res = do_rep_route(top, phy_id, index, smp_resp, sizeof(smp_resp), &len, do_zero, do_hex, do_raw, verbose); if (res) return res; if (do_hex || do_raw) return 0; printf("Report route information response:\n"); res = (smp_resp[4] << 8) + smp_resp[5]; if (verbose || (res > 0)) printf(" expander change count: %d\n", res); printf(" expander route index: %d\n", (smp_resp[6] << 8) + smp_resp[7]); printf(" phy identifier: %d\n", smp_resp[9]); printf(" expander route entry disabled: %d\n", !!(smp_resp[12] & 0x80)); if ((! (smp_resp[12] & 0x80)) || (verbose > 0)) { ull = 0; for (j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= smp_resp[16 + j]; } printf(" routed SAS address: 0x%llx\n", ull); } return 0; } int main(int argc, char * argv[]) { int res, c; int do_hex = 0; int er_ind = 0; int multiple = 0; int do_num = 0; int phy_id = 0; int do_raw = 0; int verbose = 0; int do_zero = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; struct smp_target_obj tobj; int subvalue = 0; char * cp; int ret = 0; memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "hHi:I:mn:p:rs:vVz", long_options, &option_index); if (c == -1) break; switch (c) { case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'i': er_ind = smp_get_num(optarg); if ((er_ind < 0) || (er_ind > 65535)) { fprintf(stderr, "bad argument to '--index', expect " "value from 0 to 65535\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'm': ++multiple; break; case 'n': do_num = smp_get_num(optarg); if ((do_num < 0) || (do_num > 16382)) { fprintf(stderr, "bad argument to '--num', expect " "value from 0 to 16382\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'p': phy_id = smp_get_num(optarg); if ((phy_id < 0) || (phy_id > 254)) { fprintf(stderr, "bad argument to '--phy', expect " "value from 0 to 254\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; case 'z': ++do_zero; break; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } if (verbose > 2) fprintf(stderr, " phy_id=%d expander_route_index=%d\n", phy_id, er_ind); res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; if (multiple) ret = do_multiple(&tobj, phy_id, er_ind, do_num, do_zero, do_hex, do_raw, verbose); else ret = do_single(&tobj, phy_id, er_ind, do_zero, do_hex, do_raw, verbose); if ((0 == verbose) && ret) { if (SMP_LIB_CAT_MALFORMED == ret) fprintf(stderr, "Report route information malformed response\n"); else { cp = smp_get_func_res_str(ret, sizeof(b), b); fprintf(stderr, "Report route information result: %s\n", cp); } } res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_rep_phy_sata.c0000664000175000017500000003273011675012613016765 0ustar douggdougg/* * Copyright (c) 2006-2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a REPORT PHY SATA function and outputs its * response. */ static char * version_str = "1.13 20111222"; #define SMP_FN_REPORT_PHY_SATA_RESP_LEN 72 static struct option long_options[] = { {"affiliation", 1, 0, 'a'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"interface", 1, 0, 'I'}, {"phy", 1, 0, 'p'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {"zero", 0, 0, 'z'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_rep_phy_sata [--affiliation=AC] [--help] [--hex]\n" " [--interface=PARAMS] [--phy=ID] " "[--raw]\n" " [--sa=SAS_ADDR] [--verbose] [--version] " "[--zero]\n" " SMP_DEVICE[,N]\n" " where:\n" " --affiliation=AC|-a AC relative identifier of affiliation " "context\n" " (def: 0)\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --phy=ID|-p ID phy identifier (def: 0)\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n" " --zero|-z zero Allocated Response Length " "field,\n" " may be required prior to SAS-2\n\n" "Performs a SMP REPORT PHY SATA function\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, j, len, act_resplen; int aff_context = 0; int do_hex = 0; int phy_id = 0; int phy_id_given = 0; int do_raw = 0; int verbose = 0; int do_zero = 0; long long sa_ll; unsigned long long sa = 0; unsigned long long ull; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_REPORT_PHY_SATA, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; unsigned char smp_resp[SMP_FN_REPORT_PHY_SATA_RESP_LEN]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; int subvalue = 0; char * cp; int ret = 0; memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "ahHI:p:rs:vVz", long_options, &option_index); if (c == -1) break; switch (c) { case 'a': aff_context = smp_get_num(optarg); if ((aff_context < 0) || (aff_context > 255)) { fprintf(stderr, "bad argument to '--affiliation'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'p': phy_id = smp_get_num(optarg); if ((phy_id < 0) || (phy_id > 254)) { fprintf(stderr, "bad argument to '--phy', expect " "value from 0 to 254\n"); return SMP_LIB_SYNTAX_ERROR; } ++phy_id_given; break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; case 'z': ++do_zero; break; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; if (! do_zero) { /* SAS-2 or later */ len = (sizeof(smp_resp) - 8) / 4; smp_req[2] = (len < 0x100) ? len : 0xff; /* Allocated Response Len */ smp_req[3] = 2; /* Request Length: in dwords */ } smp_req[9] = phy_id; smp_req[10] = aff_context; if (verbose) { fprintf(stderr, " Report phy SATA request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) fprintf(stderr, "%02x ", smp_req[k]); fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[2]) { if (verbose) fprintf(stderr, "Report phy SATA result: %s\n", smp_get_func_res_str(smp_resp[2], sizeof(b), b)); ret = smp_resp[2]; } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Report phy SATA result%s: %s\n", (phy_id_given ? "" : " (for phy_id=0)"), cp); ret = smp_resp[2]; goto err_out; } printf("Report phy SATA response:\n"); res = (smp_resp[4] << 8) + smp_resp[5]; if (verbose || (res > 0)) printf(" expander change count: %d\n", res); printf(" phy identifier: %d\n", smp_resp[9]); printf(" STP I_T nexus loss occurred: %d\n", !!(smp_resp[11] & 0x4)); printf(" affiliations supported: %d\n", !!(smp_resp[11] & 0x2)); printf(" affiliation valid: %d\n", !!(smp_resp[11] & 0x1)); ull = 0; for (j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= smp_resp[16 + j]; } printf(" STP SAS address: 0x%llx\n", ull); printf(" register device to host FIS:\n "); for (k = 0; k < 20; ++k) printf("%02x ", smp_resp[24 + k]); printf("\n"); ull = 0; for (j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= smp_resp[48 + j]; } printf(" affiliated STP initiator SAS address: 0x%llx\n", ull); if (len > 63) { ull = 0; for (j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= smp_resp[56 + j]; } printf(" STP I_T nexus loss SAS address: 0x%llx\n", ull); } if (len > 67) { printf(" affiliation context: %d\n", smp_resp[65]); printf(" current affiliation contexts: %d\n", smp_resp[66]); printf(" maximum affiliation contexts: %d\n", smp_resp[67]); } err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_zone_activate.c0000664000175000017500000002573511675012613017151 0ustar douggdougg/* * Copyright (c) 2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a ZONE ACTIVATE function and outputs its response. */ static char * version_str = "1.03 20111222"; static struct option long_options[] = { {"expected", 1, 0, 'E'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"interface", 1, 0, 'I'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_zone_activate [--expected=EX] [--help] [--hex]\n" " [--interface=PARAMS] [--raw] " "[--sa=SAS_ADDR]\n" " [--verbose] [--version] SMP_DEVICE[,N]\n" " where:\n" " --expected=EX|-E EX set expected expander change " "count to EX\n" " SAS-2 marks this field 'restricted'\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP ZONE ACTIVATE function\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, len, act_resplen; int expected_cc = 0; int do_hex = 0; int do_raw = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_ZONE_ACTIVATE, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, }; unsigned char smp_resp[8]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; int subvalue = 0; char * cp; int ret = 0; memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "E:hHI:rs:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'E': expected_cc = smp_get_num(optarg); if ((expected_cc < 0) || (expected_cc > 65535)) { fprintf(stderr, "bad argument to '--expected'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; smp_req[4] = (expected_cc >> 8) & 0xff; smp_req[5] = expected_cc & 0xff; if (verbose) { fprintf(stderr, " Zone activate request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) fprintf(stderr, "%02x ", smp_req[k]); fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[2]) { if (verbose) fprintf(stderr, "Zone activate result: %s\n", smp_get_func_res_str(smp_resp[2], sizeof(b), b)); ret = smp_resp[2]; } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Zone activate result: %s\n", cp); ret = smp_resp[2]; goto err_out; } err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_conf_route_info.c0000664000175000017500000003270011675012613017462 0ustar douggdougg/* * Copyright (c) 2006-2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a CONFIG ROUTE INFORMATION function and outputs its * response. */ static char * version_str = "1.08 20112222"; static struct option long_options[] = { {"disable", 0, 0, 'd'}, {"expected", 1, 0, 'E'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"index", 1, 0, 'i'}, {"interface", 1, 0, 'I'}, {"phy", 1, 0, 'p'}, {"raw", 0, 0, 'r'}, {"routed", 1, 0, 'R'}, {"sa", 1, 0, 's'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_conf_route_info [--disable] [--expected=EX] [--help] " "[--hex]\n" " [--index=IN] [--interface=PARAMS] " "[--phy=ID]\n" " [--raw] [--routed=R_SAS_ADDR] " "[--sa=SAS_ADDR]\n" " [--verbose] [--version] " "SMP_DEVICE[,N]\n" " where:\n" " --disable|-d disable expander route entry\n" " --expected=EX|-E EX set expected expander change " "count to EX\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --index=IN|-i IN expander route index (def: 0)\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --phy=ID|-p ID phy identifier (def: 0)\n" " --raw|-r output response in binary\n" " --routed=R_SAS_ADDR|-R R_SAS_ADDR routed SAS " "address\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP CONFIGURE ROUTE INFORMATION function\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, j, len, act_resplen; int do_disable = 0; int expected_cc = 0; int do_hex = 0; int er_ind = 0; int phy_id = 0; int do_raw = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; unsigned long long routed = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_CONFIG_ROUTE_INFO, 0, 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, }; unsigned char smp_resp[8]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; int subvalue = 0; char * cp; int ret = 0; memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "dE:hHi:I:p:rR:s:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'd': do_disable = 1; break; case 'E': expected_cc = smp_get_num(optarg); if ((expected_cc < 0) || (expected_cc > 65535)) { fprintf(stderr, "bad argument to '--expected'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'i': er_ind = smp_get_num(optarg); if ((er_ind < 0) || (er_ind > 65535)) { fprintf(stderr, "bad argument to '--index'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'p': phy_id = smp_get_num(optarg); if ((phy_id < 0) || (phy_id > 254)) { fprintf(stderr, "bad argument to '--phy', expect " "value from 0 to 254\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'r': ++do_raw; break; case 'R': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--routed'\n"); return SMP_LIB_SYNTAX_ERROR; } routed = (unsigned long long)sa_ll; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } if (routed > 0) { if (! smp_is_naa5(routed)) { fprintf(stderr, "routed SAS address not in naa-5 format\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use any '--interface=' to continue\n"); return SMP_LIB_SYNTAX_ERROR; } } } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; smp_req[4] = (expected_cc >> 8) & 0xff; smp_req[5] = expected_cc & 0xff; smp_req[6] = (er_ind >> 8) & 0xff; smp_req[7] = er_ind & 0xff; smp_req[9] = phy_id; if (do_disable) smp_req[12] |= 0x80; if (routed > 0) { for (j = 0; j < 8; ++j) { if (0 == j) smp_req[16 + 7] = routed & 0xff; else smp_req[16 + 7 - j] = ((routed >> (8 * j)) & 0xff); } } if (verbose) { fprintf(stderr, " Configure route information request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) { if (0 == (k % 16)) fprintf(stderr, "\n "); else if (0 == (k % 8)) fprintf(stderr, " "); fprintf(stderr, "%02x ", smp_req[k]); } fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[2]) { if (verbose) fprintf(stderr, "Configure route information result: %s\n", smp_get_func_res_str(smp_resp[2], sizeof(b), b)); ret = smp_resp[2]; } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Configure route information result: %s\n", cp); ret = smp_resp[2]; goto err_out; } err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_rep_zone_perm_tbl.c0000664000175000017500000004621711675012613020021 0ustar douggdougg/* * Copyright (c) 2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a REPORT ZONE PERMISSION TABLE function and outputs * its response. */ static char * version_str = "1.05 20111222"; #define SMP_FN_REPORT_ZONE_PERMISSION_TBL_RESP_LEN (1020 + 4 + 4) #define DEF_MAX_NUM_DESC 63 static char * decode_rtype[] = { "current", "shadow", "saved", "default", }; static char * decode_numzg[] = { "128", "256", "?", "? ?", }; static int numzg_blen[] = { 16, 32, 0, 0, }; static struct option long_options[] = { {"append", 0, 0, 'a'}, {"bits", 1, 0, 'B'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"interface", 1, 0, 'I'}, {"multiple", 0, 0, 'm'}, {"num", 1, 0, 'n'}, {"nocomma", 0, 0, 'N'}, {"permf", 1, 0, 'P'}, {"raw", 0, 0, 'r'}, {"report", 1, 0, 'R'}, {"sa", 1, 0, 's'}, {"start", 1, 0, 'f'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_rep_zone_perm_tbl [--append] [--bits=COL] [--help] [--hex]\n" " [--interface=PARAMS] [--multiple] " "[--nocomma]\n" " [--num=MD] [--permf=FN] [--raw] " "[--report=RT]\n" " [--sa=SAS_ADDR] [--start=SS] " "[--verbose]\n" " [--version] SMP_DEVICE[,N]\n" " where:\n" " --append|-a append to FN with '--permf' option\n" " --bits=COL|-B COL output table as bit array with COL " "columns\n" " and ZP[0,0] top left (def: output byte " "array)\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --multiple|-m issue multiple function requests until " "all\n" " available descriptors (from SS) are " "read\n" " --nocomma|-N output descriptors as long string of " "hex\n" " (default: bytes comma separated)\n" " --num=MD|-n MD maximum number of descriptors in one " "response\n" " (default: 63)\n" " --permf=FN|-P FN write descriptors to file FN (default: " "write\n" " to stdout)\n" " --raw|-r output response in binary\n" " --report=RT|-R RT report type (default: 0). 0 -> current;" "\n" " 1 -> shadow; 2 -> saved; 3 -> default\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). Depending " "on\n" " the interface, may not be " "needed\n" " --start=SS|-f SS starting (first) source zone group " "(default: 0)\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Perform one or more SMP REPORT ZONE PERMISSION TABLE functions\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, j, m, len, desc_len, num_desc, numzg, max_sszg; int desc_per_resp, first, rtype, act_resplen; int do_append = 0; int do_hex = 0; int multiple = 0; int nocomma = 0; int mndesc = DEF_MAX_NUM_DESC; int mndesc_given = 0; const char * permf = NULL; int do_raw = 0; int report_type = 0; int sszg = 0; int bits_col = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[12]; unsigned char smp_resp[SMP_FN_REPORT_ZONE_PERMISSION_TBL_RESP_LEN]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; int subvalue = 0; char * cp; unsigned char * descp; FILE * foutp = stdout; int ret = 0; memset(device_name, 0, sizeof device_name); memset(smp_resp, 0, sizeof smp_resp); while (1) { int option_index = 0; c = getopt_long(argc, argv, "aB:f:hHI:mn:NP:rR:s:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'a': ++do_append; break; case 'B': bits_col = smp_get_num(optarg); if ((bits_col < 1) || (bits_col > 256)) { fprintf(stderr, "bad argument to '--bits=', expect 1 to " "256\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'f': /* note: maps to '--start=SS' option */ sszg = smp_get_num(optarg); if ((sszg < 0) || (sszg > 255)) { fprintf(stderr, "bad argument to '--start=', expect 0 to " "255\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'n': mndesc = smp_get_num(optarg); if ((mndesc < 0) || (mndesc > 63)) { fprintf(stderr, "bad argument to '--num=', expect 0 to " "63\n"); return SMP_LIB_SYNTAX_ERROR; } if (0 == mndesc) mndesc = DEF_MAX_NUM_DESC; else ++mndesc_given; break; case 'm': ++multiple; break; case 'N': ++nocomma; break; case 'P': permf = optarg; break; case 'r': ++do_raw; break; case 'R': report_type = smp_get_num(optarg); if ((report_type < 0) || (report_type > 3)) { fprintf(stderr, "bad argument to '--report=', expect 0 to " "3\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } if (multiple && mndesc_given) { fprintf(stderr, "--multiple and --num clash, give one or the " "other\n"); return SMP_LIB_SYNTAX_ERROR; } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; if (permf) { if ((1 == strlen(permf)) && (0 == strcmp("-", permf))) ; else { foutp = fopen(permf, (do_append ? "a" : "w")); if (NULL == foutp) { fprintf(stderr, "unable to open %s, error: %s\n", permf, safe_strerror(errno)); ret = SMP_LIB_FILE_ERROR; goto err_out; } } } max_sszg = 256; desc_per_resp = 63; for (j = sszg, first = 1; j < max_sszg; j += desc_per_resp) { memset(smp_req, 0, sizeof smp_req); smp_req[0] = SMP_FRAME_TYPE_REQ; smp_req[1] = SMP_FN_REPORT_ZONE_PERMISSION_TBL; len = (sizeof(smp_resp) - 8) / 4; smp_req[2] = (len < 0x100) ? len : 0xff; /* Allocated Response Len */ smp_req[3] = 0x1; smp_req[4] = report_type & 0x3; smp_req[6] = j & 0xff; numzg = max_sszg - j; if (desc_per_resp < numzg) numzg = desc_per_resp; if (mndesc < numzg) numzg = mndesc; smp_req[7] = numzg & 0xff; if (verbose) { fprintf(stderr, " Report zone permission table request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) fprintf(stderr, "%02x ", smp_req[k]); fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than " "deduced length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; if (smp_resp[2]) { ret = smp_resp[2]; if (verbose) fprintf(stderr, "Report zone permission table result: %s\n", smp_get_func_res_str(ret, sizeof(b), b)); } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Report zone permission table result: %s\n", cp); ret = smp_resp[2]; goto err_out; } numzg = (0xc0 & smp_resp[7]) >> 6; desc_len = smp_resp[13] * 4; num_desc = smp_resp[15]; rtype = 0x3 & smp_resp[6]; if (first) { first = 0; if (0 == numzg) { max_sszg = 128; desc_per_resp = 63; } else { max_sszg = 256; desc_per_resp = 31; } fprintf(foutp, "# Report zone permission table response:\n"); res = (smp_resp[4] << 8) + smp_resp[5]; if (verbose || res) fprintf(foutp, "# Expander change count: %d\n", res); fprintf(foutp, "# zone locked: %d\n", !! (0x80 & smp_resp[6])); fprintf(foutp, "# report type: %d [%s]\n", rtype, decode_rtype[rtype]); fprintf(foutp, "# number of zone groups: %d (%s)\n", numzg, decode_numzg[numzg]); if (verbose) { fprintf(foutp, "# zone permission descriptor length: %d " "dwords\n", smp_resp[13]); fprintf(foutp, "# starting source zone group%s: %d\n", (multiple ? " (of first request)" : ""), smp_resp[14]); fprintf(foutp, "# number of zone permission descriptors%s: " "%d\n", (multiple ? " (of first request)" : ""), num_desc); } else if (! multiple) fprintf(foutp, "# number of zone permission descriptors: " "%d\n", num_desc); if (sszg > 0) fprintf(foutp, "--start=%d\n", sszg); if (bits_col) { fprintf(foutp, "\n\nOutput unsuitable for " "smp_conf_zone_perm_tbl utility\n\n "); for (k = 0; k < bits_col; ++k) fprintf(foutp, "%d", k % 10); fprintf(foutp, "\n\n"); } if (0 == numzg_blen[numzg]) { fprintf(stderr, "unexpected number of zone groups: %d\n", numzg); goto err_out; } } descp = smp_resp + 16; for (k = 0; k < num_desc; ++k, descp += desc_len) { if (0 == bits_col) { for (m = 0; m < desc_len; ++m) { if (nocomma) fprintf(foutp, "%02x", descp[m]); else { if (0 == m) fprintf(foutp, "%x", descp[m]); else fprintf(foutp, ",%x", descp[m]); } } } else { /* --bit= given */ int by, bi; if ((k + j) >= bits_col) break; fprintf(foutp, "%-4d", j + k); for (m = 0; m < bits_col; ++m) { by = (m / 8) + 1; bi = m % 8; fprintf(foutp, "%d", (descp[desc_len - by] >> bi) & 0x1); } } fprintf(foutp, "\n"); } if ((0 == multiple) || (mndesc < desc_per_resp)) break; } err_out: if (foutp && (stdout != foutp)) { fclose(foutp); foutp = NULL; } res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_phy_control.c0000664000175000017500000004422711675012613016653 0ustar douggdougg/* * Copyright (c) 2006-2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a PHY CONTROL function and outputs its response. */ static char * version_str = "1.15 20111222"; static struct option long_options[] = { {"attached", 1, 0, 'a'}, {"expected", 1, 0, 'E'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"interface", 1, 0, 'I'}, {"min", 1, 0, 'm'}, {"max", 1, 0, 'M'}, {"op", 1, 0, 'o'}, {"phy", 1, 0, 'p'}, {"pptv", 1, 0, 'P'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"sas_pa", 1, 0, 'q'}, {"sas_sl", 1, 0, 'l'}, {"sata_pa", 1, 0, 'Q'}, {"sata_sl", 1, 0, 'L'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_phy_control [--attached=ADN] [--expected=EX] [--help] " "[--hex]\n" " [--interface=PARAMS] [--max=MA] " "[--min=MI] [--op=OP]\n" " [--phy=ID] [--pptv=TI] [--raw] " "[--sa=SAS_ADDR]\n" " [--sas_pa=CO] [--sas_sl=CO] " "[--sata_pa=CO]\n" " [--sata_sl=CO] [--version] " "[--verbose] [--version]\n" " SMP_DEVICE[,N]\n" " where:\n" " --attached=ADN|-a ADN attached device name [a decimal " "number,\n" " use '0x' prefix for hex], (def: " "0)\n" " --expected=EX|-E EX set expected expander change count " "to EX\n" " (def: 0 (implies ignore))\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --max=MA|-M MA programmable maximum physical link " "speed\n" " (8->1.5 Gbps, 9->3 Gbps, " "10->6 Gbps,\n" " 11->12 Gbps)\n" " --min=MI|-m MI programmable minimum physical link " "speed\n" " --sas_pa=CO|-q CO Enable SAS Partial field; CO: " "0->leave (def)\n" " 1->manage (enable), 2->disable\n" " --sas_sl=CO|-l CO Enable Slumber Partial field\n" " --sata_pa=CO|-Q CO Enable SATA Partial field\n" " --sata_sl=CO|-L CO Enable SATA Slumber field\n" " --op=OP|-o OP OP (operation) is a number or " "abbreviation.\n" " Default: 0 (nop). See below\n" " --phy=ID|-p ID phy identifier (def: 0)\n" " --pptv=TI|-P TI partial pathway timeout value " "(microseconds)\n" " (if given sets UPPTV bit)\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP PHY CONTROL function. Operation codes (OP): " "0,'nop'; 1,'lr'\n[link reset]; 2,'hr' [hard reset]; 3,'dis' " "[disable]; 5,'cel' [clear error\nlog]; 6,'ca' [clear " "affiliation]; 7,'tspss' [transmit SATA port selection\nsignal]; " "8,'citnl' [clear STP I_T nexus loss]; 9,'sadn' [set attached\n" "device name].\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } static struct smp_val_name op_abbrev[] = { {0, "nop"}, {1, "lr"}, /* link reset */ {2, "hr"}, /* hard reset */ {3, "dis"}, /* disable phy */ {5, "cel"}, /* clear error log */ {6, "ca"}, /* clear affiliation */ {7, "tspss"}, /* transmit SATA port selection signal */ {8, "citnl"}, /* clear STP I_T nexus loss */ {9, "sadn"}, /* set attached device name */ {-1, NULL}, }; static void list_op_abbrevs() { struct smp_val_name * vnp; fprintf(stderr, " Valid operation abbreviations are:\n"); for (vnp = op_abbrev; vnp->name; ++vnp) fprintf(stderr, " %s\n", vnp->name); } int main(int argc, char * argv[]) { int res, c, k, j, len, act_resplen; int expected_cc = 0; int do_hex = 0; int do_min = 0; int do_max = 0; int op_val = 0; int sas_pa = 0; int sas_sl = 0; int sata_pa = 0; int sata_sl = 0; int pptv = -1; int phy_id = 0; int do_raw = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; unsigned long long adn = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_PHY_CONTROL, 0, 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, }; unsigned char smp_resp[8]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; struct smp_val_name * vnp; int subvalue = 0; char * cp; int ret = 0; memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "a:E:hHI:l:L:m:M:o:p:P:q:Q;rs:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'a': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--attached'\n"); return SMP_LIB_SYNTAX_ERROR; } adn = (unsigned long long)sa_ll; break; case 'E': expected_cc = smp_get_num(optarg); if ((expected_cc < 0) || (expected_cc > 65535)) { fprintf(stderr, "bad argument to '--expected'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'm': do_min = smp_get_num(optarg); switch (do_min) { case 0: case 8: case 9: case 10: case 11: break; default: fprintf(stderr, "bad argument to '--min', want 0, 8, 9, " "10 or 11\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'M': do_max = smp_get_num(optarg); switch (do_max) { case 0: case 8: case 9: case 10: case 11: break; default: fprintf(stderr, "bad argument to '--max', want 0, 8, 9, " "10 or 11\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'l': sas_sl = smp_get_num(optarg); if ((sas_sl < 0) || (sas_sl > 3)) { fprintf(stderr, "bad argument to '--sas_sl'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'L': sata_sl = smp_get_num(optarg); if ((sata_sl < 0) || (sata_sl > 3)) { fprintf(stderr, "bad argument to '--sata_sl'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'o': if (isalpha(optarg[0])) { for (vnp = op_abbrev; vnp->name; ++vnp) { if (0 == strncmp(optarg, vnp->name, 2)) break; } if (vnp->name) op_val = vnp->value; else { fprintf(stderr, "bad argument to '--op'\n"); list_op_abbrevs(); return SMP_LIB_SYNTAX_ERROR; } } else { op_val = smp_get_num(optarg); if ((op_val < 0) || (op_val > 255)) { fprintf(stderr, "bad numeric argument to '--op'\n"); return SMP_LIB_SYNTAX_ERROR; } } break; case 'p': phy_id = smp_get_num(optarg); if ((phy_id < 0) || (phy_id > 254)) { fprintf(stderr, "bad argument to '--phy', expect " "value from 0 to 254\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'P': pptv = smp_get_num(optarg); if ((pptv < 0) || (pptv > 15)) { fprintf(stderr, "bad argument to '--pptv', want value" "from 0 to 15 inclusive\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'q': sas_pa = smp_get_num(optarg); if ((sas_pa < 0) || (sas_pa > 3)) { fprintf(stderr, "bad argument to '--sas_pa'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'Q': sata_pa = smp_get_num(optarg); if ((sata_pa < 0) || (sata_pa > 3)) { fprintf(stderr, "bad argument to '--sata_pa'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; smp_req[4] = (expected_cc >> 8) & 0xff; smp_req[5] = expected_cc & 0xff; smp_req[9] = phy_id; smp_req[10] = op_val; if (pptv >= 0) { smp_req[11] |= 1; smp_req[36] |= (pptv & 0xf); } if (adn) { for (j = 0; j < 8; ++j, (adn >>= 8)) smp_req[24 + 7 - j] = (adn & 0xff); } smp_req[32] |= (do_min << 4); smp_req[33] |= (do_max << 4); smp_req[34] = (sas_sl << 6) | (sas_pa << 4) | (sata_sl << 2) | sata_pa; if (verbose) { fprintf(stderr, " Phy control request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) { if (0 == (k % 16)) fprintf(stderr, "\n "); else if (0 == (k % 8)) fprintf(stderr, " "); fprintf(stderr, "%02x ", smp_req[k]); } fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than " "deduced length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[2]) { if (verbose) fprintf(stderr, "Phy control result: %s\n", smp_get_func_res_str(smp_resp[2], sizeof(b), b)); ret = smp_resp[2]; } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Phy control result: %s\n", cp); ret = smp_resp[2]; goto err_out; } err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_zone_unlock.c0000664000175000017500000002650611675012613016641 0ustar douggdougg/* * Copyright (c) 2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a ZONE UNLOCK function and outputs its response. */ static char * version_str = "1.03 20111222"; static struct option long_options[] = { {"activate", 0, 0, 'a'}, {"expected", 1, 0, 'E'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"interface", 1, 0, 'I'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_zone_unlock [--activate] [--expected=EX] [--help] [--hex]\n" " [--interface=PARAMS] [--raw] " "[--sa=SAS_ADDR]\n" " [--verbose] [--version] SMP_DEVICE[,N]\n" " where:\n" " --activate|-a activate required; function will " "result in\n" " error if ZONE ACTIVATE has not been " "called\n" " --expected=EX|-E EX set expected expander change " "count to EX\n" " SAS-2 marks this field 'restricted'\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP ZONE UNLOCK function\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, len, act_resplen; int activate_required = 0; int expected_cc = 0; int do_hex = 0; int do_raw = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_ZONE_UNLOCK, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, }; unsigned char smp_resp[8]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; int subvalue = 0; char * cp; int ret = 0; memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "aE:hHI:rs:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'a': activate_required = 1; break; case 'E': expected_cc = smp_get_num(optarg); if ((expected_cc < 0) || (expected_cc > 65535)) { fprintf(stderr, "bad argument to '--expected'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; smp_req[4] = (expected_cc >> 8) & 0xff; smp_req[5] = expected_cc & 0xff; smp_req[6] = activate_required & 1; if (verbose) { fprintf(stderr, " Zone unlock request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) fprintf(stderr, "%02x ", smp_req[k]); fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[2]) { if (verbose) fprintf(stderr, "Zone unlock result: %s\n", smp_get_func_res_str(smp_resp[2], sizeof(b), b)); ret = smp_resp[2]; } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Zone unlock result: %s\n", cp); ret = smp_resp[2]; goto err_out; } err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_rep_general.c0000664000175000017500000004142711675012613016575 0ustar douggdougg/* * Copyright (c) 2006-2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a REPORT GENERAL function and outputs its response. */ static char * version_str = "1.22 20111222"; /* spl2r01 */ #define SMP_FN_REPORT_GENERAL_RESP_LEN 76 static struct option long_options[] = { {"brief", 0, 0, 'b'}, {"changecount", 0, 0, 'c'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"interface", 1, 0, 'I'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {"zero", 0, 0, 'z'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_rep_general [--brief] [--changecount] [--help] [--hex]\n" " [--interface=PARAMS] [--raw] " "[--sa=SAS_ADDR]\n" " [--verbose] [--version] [--zero]" "SMP_DEVICE[,N]\n" " where:\n" " --brief|-b brief report, only important settings\n" " --changecount|-c report expander change count " "only\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n" " --zero|-z zero Allocated Response Length " "field,\n" " may be required prior to SAS-2\n\n" "Performs a SMP REPORT GENERAL function\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, len, sas2, zsupp, psupp, act_resplen; int do_brief = 0; int do_ccount = 0; int do_full = 1; int do_hex = 0; int do_raw = 0; int verbose = 0; int do_zero = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_REPORT_GENERAL, 0, 0, 0, 0, 0, 0}; unsigned char smp_resp[SMP_FN_REPORT_GENERAL_RESP_LEN]; struct smp_target_obj tobj; struct smp_req_resp smp_rr; int subvalue = 0; char * cp; int ret = 0; memset(device_name, 0, sizeof device_name); memset(i_params, 0, sizeof i_params); while (1) { int option_index = 0; c = getopt_long(argc, argv, "bchHI:rs:vVz", long_options, &option_index); if (c == -1) break; switch (c) { case 'b': ++do_brief; do_full = 0; break; case 'c': ++do_ccount; break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; case 'z': ++do_zero; break; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; if (! do_zero) { len = (sizeof(smp_resp) - 8) / 4; smp_req[2] = (len < 0x100) ? len : 0xff; } if (verbose) { fprintf(stderr, " Report general request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) fprintf(stderr, "%02x ", smp_req[k]); fprintf(stderr, "\n"); } memset(smp_resp, 0, sizeof(smp_resp)); memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, (1 == do_hex)); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[2]) { if (verbose) fprintf(stderr, "Report general result: %s\n", smp_get_func_res_str(smp_resp[2], sizeof(b), b)); ret = smp_resp[2]; } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Report general result: %s\n", cp); ret = smp_resp[2]; goto err_out; } if (do_ccount) { printf("%d\n", (smp_resp[4] << 8) + smp_resp[5]); goto err_out; } sas2 = !! (smp_resp[3]); if (do_full) { printf("Report general response:\n"); printf(" expander change count: %d\n", (smp_resp[4] << 8) + smp_resp[5]); printf(" expander route indexes: %d\n", (smp_resp[6] << 8) + smp_resp[7]); } else printf("Report general, brief response:\n"); printf(" long response: %d\n", !!(smp_resp[8] & 0x80)); printf(" number of phys: %d\n", smp_resp[9]); if (do_full && (sas2 || (verbose > 3))) printf(" table to table supported: %d\n", !!(smp_resp[10] & 0x80)); if (do_full || (smp_resp[10] & 0x40)) printf(" zone configuring: %d\n", !!(smp_resp[10] & 0x40)); if (do_full || (smp_resp[10] & 0x20)) printf(" self configuring: %d\n", !!(smp_resp[10] & 0x20)); if (do_full && (sas2 || (verbose > 3))) { printf(" STP continue AWT: %d\n", !!(smp_resp[10] & 0x10)); printf(" open reject retry supported: %d\n", !!(smp_resp[10] & 0x8)); printf(" configures others: %d\n", !!(smp_resp[10] & 0x4)); printf(" configuring: %d\n", !!(smp_resp[10] & 0x2)); } if (do_full) { /* following "externally" word added in SAS-2 */ printf(" externally configurable route table: %d\n", !!(smp_resp[10] & 0x1)); if (smp_resp[12]) { /* assume naa-5 present */ /* not in SAS-1; in SAS-1.1 and SAS-2 */ printf(" enclosure logical identifier (hex): "); for (k = 0; k < 8; ++k) printf("%02x", smp_resp[12 + k]); printf("\n"); } if ((0 == smp_resp[12]) && verbose) printf(" enclosure logical identifier \n"); if (len < 36) goto err_out; printf(" STP bus inactivity timer: %d (unit: 100ms)\n", (smp_resp[30] << 8) + smp_resp[31]); printf(" STP maximum connect time: %d (unit: 100ms)\n", (smp_resp[32] << 8) + smp_resp[33]); printf(" STP SMP I_T nexus loss time: %d (unit: ms)\n", (smp_resp[34] << 8) + smp_resp[35]); if (len < 40) goto err_out; } else { if (len < 40) goto err_out; } zsupp = !!(smp_resp[36] & 0x2); if (zsupp || do_full) { printf(" number of zone groups: %d (0->128, 1->256)\n", ((smp_resp[36] & 0xc0) >> 6)); printf(" zone locked: %d\n", !!(smp_resp[36] & 0x10)); psupp = !!(smp_resp[36] & 0x8); if (do_full) printf(" physical presence supported: %d\n", psupp); if (psupp || do_full) printf(" physical presence asserted: %d\n", !!(smp_resp[36] & 0x4)); if (do_full) printf(" zoning supported: %d\n", zsupp); printf(" zoning enabled: %d\n", !!(smp_resp[36] & 0x1)); if (do_full || (smp_resp[37] & 0x10)) printf(" saving: %d\n", !!(smp_resp[37] & 0x10)); if (do_full) { printf(" saving zone manager password supported: %d\n", !!(smp_resp[37] & 0x8)); printf(" saving zone phy information supported: %d\n", !!(smp_resp[37] & 0x4)); printf(" saving zone permission table supported: %d\n", !!(smp_resp[37] & 0x2)); printf(" saving zoning enabled supported: %d\n", !!(smp_resp[37] & 0x1)); printf(" maximum number of routed SAS addresses: %d\n", (smp_resp[38] << 8) + smp_resp[39]); if (len < 48) goto err_out; printf(" active zone manager SAS address (hex): "); for (k = 0; k < 8; ++k) printf("%02x", smp_resp[40 + k]); printf("\n"); } } if (len < 50) goto err_out; if (do_full) { printf(" zone lock inactivity time limit: %d (unit: 100ms)\n", (smp_resp[48] << 8) + smp_resp[49]); printf(" power done timeout: %d (unit: second)\n", smp_resp[52]); } if (len < 56) goto err_out; if (do_full) { printf(" first enclosure connector element index: %d\n", smp_resp[53]); printf(" number of enclosure connector element indexes: %d\n", smp_resp[54]); } if (len < 60) goto err_out; if (do_full || (smp_resp[56] & 0x80)) printf(" reduced functionality: %d\n", !!(smp_resp[56] & 0x80)); if (do_brief) goto err_out; printf(" time to reduced functionality: %d (unit: 100ms)\n", smp_resp[57]); printf(" initial time to reduced functionality: %d (unit: 100ms)\n", smp_resp[58]); printf(" maximum reduced functionality time: %d (unit: second)\n", smp_resp[59]); if (len < 68) goto err_out; printf(" last self-configuration status descriptor index: %d\n", (smp_resp[60] << 8) + smp_resp[61]); printf(" maximum number of stored self-configuration status " "descriptors: %d\n", (smp_resp[62] << 8) + smp_resp[63]); printf(" last phy event list descriptor index: %d\n", (smp_resp[64] << 8) + smp_resp[65]); printf(" maximum number of stored phy event list " "descriptors: %d\n", (smp_resp[66] << 8) + smp_resp[67]); printf(" STP reject to open limit: %d (unit: 10us)\n", (smp_resp[68] << 8) + smp_resp[69]); err_out: res = smp_initiator_close(&tobj); if (res < 0) { if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_discover_list.c0000664000175000017500000013552111675012613017162 0ustar douggdougg/* * Copyright (c) 2006-2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a DISCOVER LIST function and outputs its response. * * Defined in SAS-2 (most recent draft sas2r16.pdf) and SPL which defines * the upper layers of SAS-2.1 . The most recent SPL draft is spl-r07.pdf . */ static char * version_str = "1.27 20111222"; /* spl2r03 */ #define MAX_DLIST_SHORT_DESCS 40 #define MAX_DLIST_LONG_DESCS 8 static struct option long_options[] = { {"adn", 0, 0, 'A'}, {"brief", 0, 0, 'b'}, {"descriptor", 1, 0, 'd'}, {"filter", 1, 0, 'f'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"ignore", 0, 0, 'i'}, {"interface", 1, 0, 'I'}, {"list", 0, 0, 'l'}, /* placeholder, not implemented */ {"num", 1, 0, 'n'}, {"one", 0, 0, 'o'}, {"phy", 1, 0, 'p'}, {"sa", 1, 0, 's'}, {"summary", 0, 0, 'S'}, {"raw", 0, 0, 'r'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {"zpi", 1, 0, 'Z'}, {0, 0, 0, 0}, }; struct opts_t { int do_adn; int do_brief; int desc_type; int desc_type_given; int filter; int do_hex; int ign_zp; int do_num; int num_given; int do_1line; int phy_id; int phy_id_given; int do_raw; int do_summary; int verbose; int sa_given; unsigned long long sa; const char * zpi_fn; FILE * zpi_filep; }; static void usage(void) { fprintf(stderr, "Usage: " "smp_discover_list [--adn] [--brief] [--descriptor=TY] " "[--filter=FI]\n" " [--help] [--hex] [--ignore] " "[--interface=PARAMS]\n" " [--num=NUM] [--one] [--phy=ID] " "[--raw]\n" " [--sa=SAS_ADDR] [--summary] " "[--verbose]\n" " [--version] [--zpi=FN] " "[,]\n"); fprintf(stderr, " where:\n" " --adn|-A output attached device name in one " "line per\n" " phy mode (i.e. with --one)\n" " --brief|-b brief: less output, can be used " "multiple times\n" " --descriptor=TY|-d TY descriptor type:\n" " 0 -> long (as in DISCOVER); 1 -> " "short (24 byte)\n" " default is 1 if --brief given, " "else default is 0\n" " --filter=FI|-f FI phy filter: 0 -> all (def); 1 -> " "expander\n" " attached; 2 -> expander " "or end device\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --ignore|-i sets the Ignore Zone Group bit; " "will show\n" " phys otherwise hidden by zoning\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --num=NUM|-n NUM maximum number of descriptors to fetch " "(def: 1)\n" " --one|-o one line output per response " "descriptor (phy)\n" " --phy=ID|-p ID phy identifier [or starting phy id]\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n"); fprintf(stderr, " --summary|-S output 1 line per active phy; " "typically\n" " equivalent to: '-o -d 1 -n 254 -b' .\n" " This option is assumed if '--phy=ID' " "not given\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n" " --zpi=FN|-Z FN FN is file that zone phy information " "will be\n" " written to (for " "smp_conf_zone_phy_info)\n\n" "Performs one or more SMP DISCOVER LIST functions. If '--phy=ID' " "not given\nthen '--summary' is assumed. The '--summary' option " "shows the disposition\nof each active expander phy in table " "form.\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } static char * smp_attached_device_type[] = { "no device attached", "end device", "expander device", /* was 'edge expander' in SAS-1.1 */ "expander device (fanout)", /* marked as obsolete in SAS-2.0 */ "reserved [4]", "reserved [5]", "reserved [6]", "reserved [7]", }; static char * smp_short_attached_device_type[] = { "", /* was "no " */ "", /* was "end" */ "exp", "fex", /* obsolete in sas2r05a */ "res", "res", "res", "res", }; static char * smp_get_plink_rate(int val, int prog, int b_len, char * b) { switch (val) { case 0: snprintf(b, b_len, "not programmable"); break; case 8: snprintf(b, b_len, "1.5 Gbps"); break; case 9: snprintf(b, b_len, "3 Gbps"); break; case 0xa: snprintf(b, b_len, "6 Gbps"); break; case 0xb: snprintf(b, b_len, "12 Gbps"); break; default: if (prog && (0 == val)) snprintf(b, b_len, "not programmable"); else snprintf(b, b_len, "reserved [%d]", val); break; } return b; } static char * smp_get_reason(int val, int b_len, char * b) { switch (val) { case 0: snprintf(b, b_len, "unknown"); break; case 1: snprintf(b, b_len, "power on"); break; case 2: snprintf(b, b_len, "hard reset"); break; case 3: snprintf(b, b_len, "SMP phy control requested"); break; case 4: snprintf(b, b_len, "loss of dword synchronization"); break; case 5: snprintf(b, b_len, "error in multiplexing (MUX) sequence"); break; case 6: snprintf(b, b_len, "I_T nexus loss timeout STP/SATA"); break; case 7: snprintf(b, b_len, "break timeout timer expired"); break; case 8: snprintf(b, b_len, "phy test function stopped"); break; case 9: snprintf(b, b_len, "expander reduced functionality"); break; default: snprintf(b, b_len, "reserved [%d]", val); break; } return b; } static char * smp_get_neg_xxx_link_rate(int val, int b_len, char * b) { switch (val) { case 0: snprintf(b, b_len, "phy enabled; unknown"); break; case 1: snprintf(b, b_len, "phy disabled"); break; case 2: snprintf(b, b_len, "phy enabled; speed negotiation failed"); break; case 3: snprintf(b, b_len, "phy enabled; SATA spinup hold state"); break; case 4: snprintf(b, b_len, "phy enabled; port selector"); break; case 5: snprintf(b, b_len, "phy enabled; reset in progress"); break; case 6: snprintf(b, b_len, "phy enabled; unsupported phy attached"); break; case 8: snprintf(b, b_len, "phy enabled, 1.5 Gbps"); break; case 9: snprintf(b, b_len, "phy enabled, 3 Gbps"); break; case 0xa: snprintf(b, b_len, "phy enabled, 6 Gbps"); break; case 0xb: snprintf(b, b_len, "phy enabled, 12 Gbps"); break; default: snprintf(b, b_len, "reserved [%d]", val); break; } return b; } static char * find_sas_connector_type(int conn_type, char * buff, int buff_len) { switch (conn_type) { case 0x0: snprintf(buff, buff_len, "No information"); break; case 0x1: snprintf(buff, buff_len, "SAS 4x receptacle (SFF-8470) " "[max 4 phys]"); break; case 0x2: snprintf(buff, buff_len, "Mini SAS 4x receptacle (SFF-8088) " "[max 4 phys]"); break; case 0xf: snprintf(buff, buff_len, "Vendor specific external connector"); break; case 0x10: snprintf(buff, buff_len, "SAS 4i plug (SFF-8484) [max 4 phys]"); break; case 0x11: snprintf(buff, buff_len, "Mini SAS 4i receptacle (SFF-8087) " "[max 4 phys]"); break; case 0x20: snprintf(buff, buff_len, "SAS Drive backplane receptacle (SFF-8482) " "[max 2 phys]"); break; case 0x21: snprintf(buff, buff_len, "SATA host plug [max 1 phy]"); break; case 0x22: snprintf(buff, buff_len, "SAS Drive plug (SFF-8482) [max 2 phys]"); break; case 0x23: snprintf(buff, buff_len, "SATA device plug [max 1 phy]"); break; case 0x2f: snprintf(buff, buff_len, "SAS virtual connector [max 1 phy]"); break; case 0x3f: snprintf(buff, buff_len, "Vendor specific internal connector"); break; default: if (conn_type < 0x10) snprintf(buff, buff_len, "unknown external connector type: 0x%x", conn_type); else if (conn_type < 0x20) snprintf(buff, buff_len, "unknown internal wide connector type: " "0x%x", conn_type); else if (conn_type < 0x30) snprintf(buff, buff_len, "unknown internal connector to end " "device, type: 0x%x", conn_type); else if (conn_type < 0x70) snprintf(buff, buff_len, "reserved connector type: 0x%x", conn_type); else if (conn_type < 0x80) snprintf(buff, buff_len, "vendor specific connector type: 0x%x", conn_type); else /* conn_type is a 7 bit field, so this is impossible */ snprintf(buff, buff_len, "unexpected connector type: 0x%x", conn_type); break; } return buff; } /* Returns 0 when successful, -1 for low level errors and > 0 for other error categories. */ static int do_discover_list(struct smp_target_obj * top, int sphy_id, unsigned char * resp, int max_resp_len, struct opts_t * op) { unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_DISCOVER_LIST, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, }; struct smp_req_resp smp_rr; char b[256]; char * cp; int len, res, k, dword_resp_len, mnum_desc, act_resplen; dword_resp_len = (max_resp_len - 8) / 4; smp_req[2] = (dword_resp_len < 0x100) ? dword_resp_len : 0xff; smp_req[8] = sphy_id; mnum_desc = op->do_num; if ((0 == op->desc_type) && (mnum_desc > MAX_DLIST_LONG_DESCS)) mnum_desc = MAX_DLIST_LONG_DESCS; if ((1 == op->desc_type) && (mnum_desc > MAX_DLIST_SHORT_DESCS)) mnum_desc = MAX_DLIST_SHORT_DESCS; smp_req[9] = mnum_desc; smp_req[10] = op->filter & 0xf; if (op->ign_zp) smp_req[10] |= 0x80; smp_req[11] = op->desc_type & 0xf; if (op->verbose) { fprintf(stderr, " Discover list request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) { if (0 == (k % 16)) fprintf(stderr, "\n "); else if (0 == (k % 8)) fprintf(stderr, " "); fprintf(stderr, "%02x ", smp_req[k]); } fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = max_resp_len; smp_rr.response = resp; res = smp_send_req(top, &smp_rr, op->verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == op->verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); return -1; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); return -1; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); return SMP_LIB_CAT_MALFORMED; } len = resp[3]; if ((0 == len) && (0 == resp[2])) { len = smp_get_func_def_resp_len(resp[1]); if (len < 0) { len = 0; if (op->verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (op->verbose) fprintf(stderr, "actual response length [%d] less than " "deduced length [%d]\n", act_resplen, len); len = act_resplen; } if (op->do_hex || op->do_raw) { if (op->do_hex) dStrHex((const char *)resp, len, 1); else dStrRaw((const char *)resp, len); if (SMP_FRAME_TYPE_RESP != resp[0]) return SMP_LIB_CAT_MALFORMED; if (resp[1] != smp_req[1]) return SMP_LIB_CAT_MALFORMED; if (resp[2]) { if (op->verbose) fprintf(stderr, "Discover list result: %s\n", smp_get_func_res_str(resp[2], sizeof(b), b)); return resp[2]; } return 0; } if (SMP_FRAME_TYPE_RESP != resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", resp[0]); return SMP_LIB_CAT_MALFORMED; } if (resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], resp[1]); return SMP_LIB_CAT_MALFORMED; } if (resp[2]) { if (SMP_FRES_NO_PHY != resp[2]) { cp = smp_get_func_res_str(resp[2], sizeof(b), b); fprintf(stderr, "Discover list result: %s\n", cp); } return resp[2]; } return 0; } /* long format: as described in (full, single) DISCOVER response * Returns 0 for okay, else -1 . */ static int decode_desc0_multiline(const unsigned char * resp, int offset, int hdr_ecc, struct opts_t * op) { const unsigned char *rp; unsigned long long ull; unsigned int ui; int func_res, phy_id, ecc, adt, route_attr, len, j; char b[256]; rp = resp + offset; phy_id = rp[9]; func_res = rp[2]; len = 4 + (rp[3] * 4); /* length in bytes, excluding 4 byte CRC */ printf(" phy identifier: %d\n", phy_id); if (SMP_FRES_PHY_VACANT == func_res) { printf(" inaccessible (phy vacant)\n"); return 0; } else if (func_res) { printf(" >>> function result: %s\n", smp_get_func_res_str(func_res, sizeof(b), b)); return -1; } ecc = (rp[4] << 8) + rp[5]; if ((0 != ecc) && (hdr_ecc != ecc)) printf(" >>> expander change counts differ, header: %d, this phy: " "%d\n", hdr_ecc, ecc); adt = ((0x70 & rp[12]) >> 4); if (adt < 8) printf(" attached device type: %s\n", smp_attached_device_type[adt]); if ((op->do_brief > 1) && (0 == adt)) return 0; if (0 == op->do_brief) printf(" attached reason: %s\n", smp_get_reason(0xf & rp[12], sizeof(b), b)); printf(" negotiated logical link rate: %s\n", smp_get_neg_xxx_link_rate(0xf & rp[13], sizeof(b), b)); printf(" attached initiator: ssp=%d stp=%d smp=%d sata_host=%d\n", !!(rp[14] & 8), !!(rp[14] & 4), !!(rp[14] & 2), (rp[14] & 1)); if (0 == op->do_brief) { printf(" attached sata port selector: %d\n", !!(rp[15] & 0x80)); printf(" STP buffer too small: %d\n", !!(rp[15] & 0x10)); } printf(" attached target: ssp=%d stp=%d smp=%d sata_device=%d\n", !!(rp[15] & 8), !!(rp[15] & 4), !!(rp[15] & 2), (rp[15] & 1)); ull = 0; for (j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= rp[16 + j]; } printf(" SAS address: 0x%llx\n", ull); ull = 0; for (j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= rp[24 + j]; } printf(" attached SAS address: 0x%llx\n", ull); printf(" attached phy identifier: %d\n", rp[32]); if (0 == op->do_brief) { printf(" attached power capable: %d\n", ((rp[33] >> 5) & 0x3)); printf(" attached slumber capable: %d\n", !!(rp[33] & 0x10)); printf(" attached partial capable: %d\n", !!(rp[33] & 0x8)); printf(" attached inside ZPSDS persistent: %d\n", !!(rp[33] & 4)); printf(" attached requested inside ZPSDS: %d\n", !!(rp[33] & 2)); printf(" attached break_reply capable: %d\n", !!(rp[33] & 1)); printf(" programmed minimum physical link rate: %s\n", smp_get_plink_rate(((rp[40] >> 4) & 0xf), 1, sizeof(b), b)); printf(" hardware minimum physical link rate: %s\n", smp_get_plink_rate((rp[40] & 0xf), 0, sizeof(b), b)); printf(" programmed maximum physical link rate: %s\n", smp_get_plink_rate(((rp[41] >> 4) & 0xf), 1, sizeof(b), b)); printf(" hardware maximum physical link rate: %s\n", smp_get_plink_rate((rp[41] & 0xf), 0, sizeof(b), b)); printf(" phy change count: %d\n", rp[42]); printf(" virtual phy: %d\n", !!(rp[43] & 0x80)); printf(" partial pathway timeout value: %d us\n", (rp[43] & 0xf)); } route_attr = (0xf & rp[44]); switch (route_attr) { case 0: snprintf(b, sizeof(b), "direct"); break; case 1: snprintf(b, sizeof(b), "subtractive"); break; case 2: snprintf(b, sizeof(b), "table"); break; default: snprintf(b, sizeof(b), "reserved [%d]", route_attr); break; } printf(" routing attribute: %s\n", b); if (op->do_brief) { if ((len > 59) && (rp[60] & 0x1)) printf(" zone group: %d\n", rp[63]); return 0; } printf(" connector type: %s\n", find_sas_connector_type((rp[45] & 0x7f), b, sizeof(b))); printf(" connector element index: %d\n", rp[46]); printf(" connector physical link: %d\n", rp[47]); printf(" phy power condition: %d\n", (rp[48] & 0xc0) >> 6); printf(" sas slumber capable: %d\n", !!(rp[48] & 0x8)); printf(" sas partial capable: %d\n", !!(rp[48] & 0x4)); printf(" sata slumber capable: %d\n", !!(rp[48] & 0x2)); printf(" sata partial capable: %d\n", !!(rp[48] & 0x1)); printf(" sas slumber enabled: %d\n", !!(rp[49] & 0x8)); printf(" sas partial enabled: %d\n", !!(rp[49] & 0x4)); printf(" sata slumber enabled: %d\n", !!(rp[49] & 0x2)); printf(" sata partial enabled: %d\n", !!(rp[49] & 0x1)); if (len > 59) { ull = 0; for (j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= rp[52 + j]; } printf(" attached device name: 0x%llx\n", ull); printf(" requested inside ZPSDS changed by expander: %d\n", !!(rp[60] & 0x40)); printf(" inside ZPSDS persistent: %d\n", !!(rp[60] & 0x20)); printf(" requested inside ZPSDS: %d\n", !!(rp[60] & 0x10)); /* printf(" zone address resolved: %d\n", !!(rp[60] & 0x8)); */ printf(" zone group persistent: %d\n", !!(rp[60] & 0x4)); printf(" inside ZPSDS: %d\n", !!(rp[60] & 0x2)); printf(" zoning enabled: %d\n", !!(rp[60] & 0x1)); printf(" zone group: %d\n", rp[63]); if (len < 76) return 0; printf(" self-configuration status: %d\n", rp[64]); printf(" self-configuration level completed: %d\n", rp[65]); ull = 0; for (j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= rp[68 + j]; } printf(" self-configuration sas address: 0x%llx\n", ull); ui = 0; for (j = 0; j < 4; ++j) { if (j > 0) ui <<= 8; ui |= rp[76 + j]; } printf(" programmed phy capabilities: 0x%x\n", ui); ui = 0; for (j = 0; j < 4; ++j) { if (j > 0) ui <<= 8; ui |= rp[80 + j]; } printf(" current phy capabilities: 0x%x\n", ui); ui = 0; for (j = 0; j < 4; ++j) { if (j > 0) ui <<= 8; ui |= rp[84 + j]; } printf(" attached phy capabilities: 0x%x\n", ui); } if (len > 95) { printf(" reason: %s\n", smp_get_reason((0xf0 & rp[94]) >> 4, sizeof(b), b)); printf(" negotiated physical link rate: %s\n", smp_get_neg_xxx_link_rate(0xf & rp[94], sizeof(b), b)); printf(" optical mode enabled: %d\n", !!(rp[95] & 0x4)); printf(" negotiated SSC: %d\n", !!(rp[95] & 0x2)); printf(" hardware muxing supported: %d\n", !!(rp[95] & 0x1)); } if (len > 107) { printf(" default inside ZPSDS persistent: %d\n", !!(rp[96] & 0x20)); printf(" default requested inside ZPSDS: %d\n", !!(rp[96] & 0x10)); printf(" default zone group persistent: %d\n", !!(rp[96] & 0x4)); printf(" default zoning enabled: %d\n", !!(rp[96] & 0x1)); printf(" default zone group: %d\n", rp[99]); printf(" saved inside ZPSDS persistent: %d\n", !!(rp[100] & 0x20)); printf(" saved requested inside ZPSDS: %d\n", !!(rp[100] & 0x10)); printf(" saved zone group persistent: %d\n", !!(rp[100] & 0x4)); printf(" saved zoning enabled: %d\n", !!(rp[100] & 0x1)); printf(" saved zone group: %d\n", rp[103]); printf(" shadow inside ZPSDS persistent: %d\n", !!(rp[104] & 0x20)); printf(" shadow requested inside ZPSDS: %d\n", !!(rp[104] & 0x10)); printf(" shadow zone group persistent: %d\n", !!(rp[104] & 0x4)); /* 'shadow zoning enabled' added in spl2r03 */ printf(" shadow zoning enabled: %d\n", !!(rp[104] & 0x1)); printf(" shadow zone group: %d\n", rp[107]); } if (len > 115) { printf(" device slot number: %d\n", rp[108]); printf(" device slot group number: %d\n", rp[109]); printf(" device slot group output connector: %.6s\n", rp + 110); } if (len > 117) printf(" STP buffer size: %d\n", (rp[116] << 8) + rp[117]); return 0; } /* short format: only DISCOVER LIST has this abridged 24 byte descriptor. * Returns 0 for okay, else -1 . */ static int decode_desc1_multiline(const unsigned char * resp, int offset, int z_supported, struct opts_t * op) { const unsigned char *rp; unsigned long long ull; int func_res, phy_id, adt, route_attr, j; char b[256]; rp = resp + offset; phy_id = rp[0]; func_res = rp[1]; printf(" phy identifier: %d\n", phy_id); if (SMP_FRES_PHY_VACANT == func_res) { printf(" inaccessible (phy vacant)\n"); return 0; } else if (func_res) { printf(" >>> function result: %s\n", smp_get_func_res_str(func_res, sizeof(b), b)); return -1; } adt = ((0x70 & rp[2]) >> 4); if (adt < 8) printf(" attached device type: %s\n", smp_attached_device_type[adt]); if ((op->do_brief > 1) && (0 == adt)) return 0; if (0 == op->do_brief) printf(" attached reason: %s\n", smp_get_reason(0xf & rp[2], sizeof(b), b)); printf(" negotiated logical link rate: %s\n", smp_get_neg_xxx_link_rate(0xf & rp[3], sizeof(b), b)); printf(" attached initiator: ssp=%d stp=%d smp=%d sata_host=%d\n", !!(rp[4] & 8), !!(rp[4] & 4), !!(rp[4] & 2), (rp[4] & 1)); if (0 == op->do_brief) printf(" attached sata port selector: %d\n", !!(rp[5] & 0x80)); printf(" attached target: ssp=%d stp=%d smp=%d sata_device=%d\n", !!(rp[5] & 8), !!(rp[5] & 4), !!(rp[5] & 2), (rp[5] & 1)); if (0 == op->do_brief) printf(" virtual phy: %d\n", !!(rp[6] & 0x80)); ull = 0; for (j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= rp[12 + j]; } printf(" attached SAS address: 0x%llx\n", ull); printf(" attached phy identifier: %d\n", rp[10]); if (0 == op->do_brief) printf(" phy change count: %d\n", rp[11]); route_attr = (0xf & rp[6]); switch (route_attr) { case 0: snprintf(b, sizeof(b), "direct"); break; case 1: snprintf(b, sizeof(b), "subtractive"); break; case 2: snprintf(b, sizeof(b), "table"); break; default: snprintf(b, sizeof(b), "reserved [%d]", route_attr); break; } printf(" routing attribute: %s\n", b); if (op->do_brief) { if (z_supported) printf(" zone group: %d\n", rp[8]); return 0; } printf(" reason: %s\n", smp_get_reason(0xf & (rp[7] >> 4), sizeof(b), b)); printf(" negotiated physical link rate: %s\n", smp_get_neg_xxx_link_rate(0xf & rp[7], sizeof(b), b)); printf(" zone group: %d\n", rp[8]); printf(" inside ZPSDS persistent: %d\n", !!(rp[9] & 0x20)); printf(" requested inside ZPSDS: %d\n", !!(rp[9] & 0x10)); /* printf(" zone address resolved: %d\n", !!(rp[9] & 0x8)); */ printf(" zone group persistent: %d\n", !!(rp[9] & 0x4)); printf(" inside ZPSDS: %d\n", !!(rp[9] & 0x2)); return 0; } /* Decodes either descriptor type into one line output. This is a * "per phy" function. Returns 0 for ok, 1 for ok plus seen ZG other * than ZG:1, else -1 . */ static int decode_1line(const unsigned char * resp, int offset, int desc, int z_supported, struct opts_t * op) { const unsigned char *rp; unsigned long long ull, adn; int phy_id, j, off, plus, negot, adt, route_attr, vp, asa_off; int func_res, aphy_id, a_init, a_target, z_group, iz_mask; int zg_not1 = 0; char b[256]; const char * cp; rp = resp + offset; switch (desc) { case 0: /* longer descriptor */ phy_id = rp[9]; func_res = rp[2]; adt = ((0x70 & rp[12]) >> 4); negot = rp[13] & 0xf; route_attr = rp[44] & 0xf; vp = rp[43] & 0x80; asa_off = 24; aphy_id = rp[32]; a_init = rp[14]; a_target = rp[15]; z_group = rp[63]; iz_mask = rp[60]; break; case 1: /* abridged 24 byte descriptor [short] */ phy_id = rp[0]; func_res = rp[1]; adt = ((0x70 & rp[2]) >> 4); negot = rp[3] & 0xf; route_attr = rp[6] & 0xf; vp = !!(rp[6] & 0x80); asa_off = 12; aphy_id = rp[10]; a_init = rp[4]; a_target = rp[5]; z_group = rp[8]; iz_mask = rp[9]; break; default: fprintf(stderr, " Unknown descriptor type %d\n", desc); return -1; } if (op->zpi_fn) { if (func_res && (SMP_FRES_PHY_VACANT != func_res)) { fprintf(stderr, " >>> function result: %s\n", smp_get_func_res_str(func_res, sizeof(b), b)); return -1; } snprintf(b, sizeof(b) - 1, "%x,%x,0,%x\n", phy_id, iz_mask & 0x34, z_group); b[sizeof(b) - 1] = '\0'; fprintf(op->zpi_filep, "%s", b); return 0; } if (SMP_FRES_PHY_VACANT == func_res) { printf(" phy %3d: inaccessible (phy vacant)\n", phy_id); return 0; } else if (func_res) { printf(" phy %3d: function result: %s\n", phy_id, smp_get_func_res_str(func_res, sizeof(b), b)); return -1; } if ((0 == op->verbose) && (0 == adt) && (op->do_brief > 1)) return 0; switch (route_attr) { case 0: cp = "D"; break; case 1: cp = "S"; break; case 2: cp = "T"; break; default: cp = "R"; break; } if (1 == negot) { printf(" phy %3d:%s:disabled\n", phy_id, cp); return 0; } else if (2 == negot) { printf(" phy %3d:%s:reset problem\n", phy_id, cp); return 0; } else if (3 == negot) { printf(" phy %3d:%s:spinup hold\n", phy_id, cp); return 0; } else if (4 == negot) { printf(" phy %3d:%s:port selector\n", phy_id, cp); return 0; } else if (5 == negot) { printf(" phy %3d:%s:reset in progress\n", phy_id, cp); return 0; } if ((0 == op->verbose) && (0 == adt) && op->do_brief) return 0; ull = 0; for (j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= rp[asa_off + j]; } if ((0 == adt) || (adt > 3)) { printf(" phy %3d:%s:attached:[0000000000000000:00]", phy_id, cp); if ((op->do_brief > 1) || op->do_adn) { printf("\n"); return 0; } if (z_supported && (1 != z_group)) { ++zg_not1; printf(" ZG:%d\n", z_group); } else printf("\n"); return !! zg_not1; } if ((0 == desc) && op->do_adn) { adn = 0; for (j = 0; j < 8; ++j) { if (j > 0) adn <<= 8; adn |= rp[52 + j]; } printf(" phy %3d:%s:attached:[%016llx:%02d %016llx %s%s", phy_id, cp, ull, aphy_id, adn, smp_short_attached_device_type[adt], (vp ? " V" : "")); } else printf(" phy %3d:%s:attached:[%016llx:%02d %s%s", phy_id, cp, ull, aphy_id, smp_short_attached_device_type[adt], (vp ? " V" : "")); if (a_init & 0xf) { off = 0; plus = 0; off += snprintf(b + off, sizeof(b) - off, " i("); if (a_init & 0x8) { off += snprintf(b + off, sizeof(b) - off, "SSP"); ++plus; } if (a_init & 0x4) { off += snprintf(b + off, sizeof(b) - off, "%sSTP", (plus ? "+" : "")); ++plus; } if (a_init & 0x2) { off += snprintf(b + off, sizeof(b) - off, "%sSMP", (plus ? "+" : "")); ++plus; } if (a_init & 0x1) { off += snprintf(b + off, sizeof(b) - off, "%sSATA", (plus ? "+" : "")); ++plus; } printf("%s)", b); } if (a_target & 0xf) { off = 0; plus = 0; off += snprintf(b + off, sizeof(b) - off, " t("); if (a_target & 0x80) { off += snprintf(b + off, sizeof(b) - off, "PORT_SEL"); ++plus; } if (a_target & 0x8) { off += snprintf(b + off, sizeof(b) - off, "%sSSP", (plus ? "+" : "")); ++plus; } if (a_target & 0x4) { off += snprintf(b + off, sizeof(b) - off, "%sSTP", (plus ? "+" : "")); ++plus; } if (a_target & 0x2) { off += snprintf(b + off, sizeof(b) - off, "%sSMP", (plus ? "+" : "")); ++plus; } if (a_target & 0x1) { off += snprintf(b + off, sizeof(b) - off, "%sSATA", (plus ? "+" : "")); ++plus; } printf("%s)", b); } printf("]"); if ((op->do_brief < 2) && (0 == op->do_adn)) { switch(negot) { case 8: cp = " 1.5 Gbps"; break; case 9: cp = " 3 Gbps"; break; case 0xa: cp = " 6 Gbps"; break; case 0xb: cp = " 12 Gbps"; break; default: cp = ""; break; } printf("%s", cp); if (z_supported && (1 != z_group)) { ++zg_not1; printf(" ZG:%d", z_group); } } printf("\n"); return !! zg_not1; } static void output_header_info(const unsigned char * resp, struct opts_t * op) { int hdr_ecc, sphy_id, z_enabled ; hdr_ecc = (resp[4] << 8) + resp[5]; sphy_id = resp[8]; z_enabled = !!(resp[16] & 0x40); if (op->zpi_fn) { if (0 == op->do_brief) { fprintf(op->zpi_filep, "# Zone phy information from DISCOVER " "LIST:\n"); fprintf(op->zpi_filep, "# expander change count: %d\n", hdr_ecc); fprintf(op->zpi_filep, "# starting phy id: %d\n", sphy_id); fprintf(op->zpi_filep, "# maximum number of phys output: %d\n", op->do_num); fprintf(op->zpi_filep, "# zoning enabled: %d\n", z_enabled); fprintf(op->zpi_filep, "#\n# Values below are in hex, phy_id in " "first column, zone group in last\n"); } } else { if (! op->do_1line) { printf("Discover list response header:\n"); printf(" starting phy id: %d\n", sphy_id); printf(" number of discover list descriptors: %d\n", resp[9]); } if ((! op->do_1line) && (0 == op->do_brief)) { printf(" expander change count: %d\n", hdr_ecc); printf(" filter: %d\n", resp[10] & 0xf); printf(" descriptor type: %d\n", resp[11] & 0xf); printf(" discover list descriptor length: %d bytes\n", resp[12] * 4); printf(" zoning supported: %d\n", !!(resp[16] & 0x80)); printf(" zoning enabled: %d\n", z_enabled); printf(" self configuring: %d\n", !!(resp[16] & 0x8)); printf(" zone configuring: %d\n", !!(resp[16] & 0x4)); printf(" configuring: %d\n", !!(resp[16] & 0x2)); printf(" externally configurable route table: %d\n", !!(resp[16] & 0x1)); printf(" last self-configuration status descriptor index: %d\n", (resp[18] << 8) + resp[19]); /* sas2r12 */ printf(" last phy event list descriptor index: %d\n", (resp[20] << 8) + resp[21]); } } } int main(int argc, char * argv[]) { int res, c, len, hdr_ecc, num_desc, resp_filter, resp_desc_type; int desc_len, k, j, no_more, err, off, adt, fresult; long long sa_ll; char i_params[256]; char device_name[512]; unsigned char resp[1020 + 8]; struct smp_target_obj tobj; int subvalue = 0; char * cp; int z_supported = 0; int z_enabled = 0; int zg_not1 = 0; int ret = 0; struct opts_t opts; memset(&opts, 0, sizeof(opts)); memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "Abd:f:hHiI:ln:op:rs:SvVZ:", long_options, &option_index); if (c == -1) break; switch (c) { case 'A': ++opts.do_adn; break; case 'b': ++opts.do_brief; break; case 'd': opts.desc_type = smp_get_num(optarg); if ((opts.desc_type < 0) || (opts.desc_type > 15)) { fprintf(stderr, "bad argument to '--desc'\n"); return SMP_LIB_SYNTAX_ERROR; } ++opts.desc_type_given; break; case 'f': opts.filter = smp_get_num(optarg); if ((opts.filter < 0) || (opts.filter > 15)) { fprintf(stderr, "bad argument to '--filter'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'h': case '?': usage(); return 0; case 'H': ++opts.do_hex; break; case 'i': ++opts.ign_zp; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'l': /* just ignore, placeholder */ break; case 'n': opts.do_num = smp_get_num(optarg); if ((opts.do_num < 0) || (opts.do_num > 254)) { fprintf(stderr, "bad argument to '--num', expect value " "from 0 to 254\n"); return SMP_LIB_SYNTAX_ERROR; } ++opts.num_given; break; case 'o': ++opts.do_1line; break; case 'p': opts.phy_id = smp_get_num(optarg); if ((opts.phy_id < 0) || (opts.phy_id > 254)) { fprintf(stderr, "bad argument to '--phy', expect " "value from 0 to 254\n"); return SMP_LIB_SYNTAX_ERROR; } ++opts.phy_id_given; break; case 'r': ++opts.do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } opts.sa = (unsigned long long)sa_ll; if (opts.sa > 0) ++opts.sa_given; break; case 'S': ++opts.do_summary; break; case 'v': ++opts.verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; case 'Z': opts.zpi_fn = optarg; break; default: fprintf(stderr, "unrecognised switch code %c [0x%x] ??\n", c, c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == opts.sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } opts.sa = (unsigned long long)sa_ll; } } if (opts.sa > 0) { if (! smp_is_naa5(opts.sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } if ((0 == opts.do_summary) && (0 == opts.do_1line) && (! opts.num_given) && (0 == opts.phy_id_given) && (NULL == opts.zpi_fn)) ++opts.do_summary; if (opts.zpi_fn) { if (opts.do_summary || opts.desc_type_given || opts.filter || opts.do_adn) { fprintf(stderr, "--zpi=FN clashes with --summary, --adn, --filter and " "--descriptor=TY options\n"); return SMP_LIB_SYNTAX_ERROR; } if (! opts.num_given) opts.do_num = 254; opts.do_1line = 1; opts.desc_type = 1; opts.ign_zp = 1; /* set --ignore */ } if (0 == opts.desc_type_given) { opts.desc_type = opts.do_brief ? 1 : 0; if (opts.do_adn) opts.desc_type = 0; } if (opts.do_summary) { ++opts.do_brief; if ((0 == opts.desc_type_given) && (0 == opts.do_adn)) opts.desc_type = 1; opts.do_1line = 1; opts.do_num = 254; } else if (! (opts.num_given || opts.zpi_fn)) opts.do_num = 1; if (opts.do_adn && (1 == opts.desc_type)) { fprintf(stderr, "--adn and --descriptor=1 options clash since " "there is no 'attached\ndevice name' field in the short " "format. Ignoring --adn .\n"); opts.do_adn = 0; } res = smp_initiator_open(device_name, subvalue, i_params, opts.sa, &tobj, opts.verbose); if (res < 0) return SMP_LIB_FILE_ERROR; if (opts.zpi_fn) { if ((1 == strlen(opts.zpi_fn)) && (0 == strcmp("-", opts.zpi_fn))) opts.zpi_filep = stdout; else { opts.zpi_filep = fopen(opts.zpi_fn, "w"); if (NULL == opts.zpi_filep) { fprintf(stderr, "unable to open %s, error: %s\n", opts.zpi_fn, safe_strerror(errno)); ret = SMP_LIB_FILE_ERROR; goto err_out; } } } no_more = 0; for (j = 0; (j < opts.do_num) && (! no_more); j += num_desc) { memset(resp, 0, sizeof(resp)); if ((opts.phy_id + j) > 254) { ret = 0; /* off the end so not error */ break; } ret = do_discover_list(&tobj, opts.phy_id + j, resp, sizeof(resp), &opts); if (ret) { if (SMP_FRES_NO_PHY == ret) ret = 0; /* off the end so not error */ break; } num_desc = resp[9]; if ((0 == opts.desc_type) && (num_desc < MAX_DLIST_LONG_DESCS)) no_more = 1; if ((1 == opts.desc_type) && (num_desc < MAX_DLIST_SHORT_DESCS)) no_more = 1; if (opts.do_hex || opts.do_raw) continue; len = (resp[3] * 4) + 4; /* length in bytes excluding CRC field */ if ((0 == j) && ((! opts.do_1line) || opts.zpi_fn)) output_header_info(resp, &opts); hdr_ecc = (resp[4] << 8) + resp[5]; z_supported = !!(resp[16] & 0x80); z_enabled = !!(resp[16] & 0x40); resp_filter = resp[10] & 0xf; if (opts.filter != resp_filter) fprintf(stderr, ">>> Requested phy filter was %d, got %d\n", opts.filter, resp_filter); resp_desc_type = resp[11] & 0xf; if (opts.desc_type != resp_desc_type) fprintf(stderr, ">>> Requested descriptor type was %d, got %d\n", opts.desc_type, resp_desc_type); desc_len = resp[12] * 4; if (len != (48 + (num_desc * desc_len))) { fprintf(stderr, ">>> Response length of %d bytes doesn't match " "%d descriptors, each\n of %d bytes plus a 48 byte " "header and 4 byte CRC\n", len + 4, num_desc, desc_len); if (len < (48 + (num_desc * desc_len))) { ret = SMP_LIB_CAT_MALFORMED; break; } } for (k = 0, err = 0; k < num_desc; ++k) { off = 48 + (k * desc_len); if (opts.do_1line) { res = decode_1line(resp, off, resp_desc_type, z_supported, &opts); if (res < 0) ++err; else if (res > 0) ++zg_not1; } else { fresult = resp[off + 2]; /* function result, 0 -> ok */ if (0 == resp_desc_type) { adt = (resp[off + 12] >> 4) & 7; if ((0 == opts.do_brief) || adt || fresult) { printf("descriptor %d:\n", j + k); if (decode_desc0_multiline(resp, off, hdr_ecc, &opts)) ++err; } } else if (1 == resp_desc_type) { adt = (resp[off + 2] >> 4) & 7; if ((0 == opts.do_brief) || adt || fresult) { printf("descriptor %d:\n", j + k); if (decode_desc1_multiline(resp, off, z_supported, &opts)) ++err; } } else ++err; } } if (err) { if (opts.verbose) fprintf(stderr, ">>> %d error%s detected\n", err, ((1 == err) ? "" : "s")); if (0 == ret) ret = SMP_LIB_CAT_OTHER; } } if ((zg_not1) && (0 == opts.do_brief) && (NULL == opts.zpi_fn)) printf("Zoning %sabled\n", z_enabled ? "en" : "dis"); err_out: if (opts.zpi_filep && (stdout != opts.zpi_filep)) fclose(opts.zpi_filep); res = smp_initiator_close(&tobj); if (res < 0) { if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (opts.verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_rep_exp_route_tbl.c0000664000175000017500000003704211675012613020031 0ustar douggdougg/* * Copyright (c) 2007-2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a REPORT EXPANDER ROUTE TABLE LIST request and outputs * its response. */ static char * version_str = "1.10 20111222"; /* sync with sas2r15 */ static struct option long_options[] = { {"brief", no_argument, 0, 'b'}, {"help", no_argument, 0, 'h'}, {"hex", no_argument, 0, 'H'}, {"index", required_argument, 0, 'i'}, {"interface", required_argument, 0, 'I'}, {"num", required_argument, 0, 'n'}, {"phy", 1, 0, 'p'}, {"sa", 1, 0, 's'}, {"raw", 0, 0, 'r'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; struct opts_t { int do_brief; int do_hex; int start_rsa_index; int do_num; int phy_id; int do_raw; int verbose; int sa_given; unsigned long long sa; }; static void usage(void) { fprintf(stderr, "Usage: " "smp_rep_exp_route_tbl [--brief] [--help] [--hex] " "[--index=IN]\n" " [--interface=PARAMS] [--num=NUM] [--phy=ID] " "[--raw]\n" " [--sa=SAS_ADDR] "); fprintf(stderr, "[--verbose] [--version]\n" " [,]\n" " where:\n" " --brief|-b brief: abridge output\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --index=IN|-i IN starting routed SAS address index " "(def: 0)\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --num=NUM|-n NUM maximum number of descriptors to fetch " "(def: 62)\n" " --phy=ID|-p ID starting phy identifier within bitmap " "(def: 0)\n" " [should be a multiple of 48]\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n"); fprintf(stderr, " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP REPORT EXPANDER ROUTE TABLE LIST function. " "Each descriptor\nin the output contains: a routed SAS address, " "a 48 bit phy bitmap and a\nzone group\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } /* Returns 0 when successful, -1 for low level errors and > 0 for other error categories. */ static int do_rep_exp_rou_tbl(struct smp_target_obj * top, unsigned char * resp, int max_resp_len, struct opts_t * optsp) { unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_REPORT_EXP_ROUTE_TBL_LIST, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, }; struct smp_req_resp smp_rr; char b[256]; char * cp; int len, res, k, dword_resp_len, act_resplen; dword_resp_len = (max_resp_len - 8) / 4; smp_req[2] = (dword_resp_len < 0x100) ? dword_resp_len : 0xff; smp_req[8] = ((optsp->do_num) >> 8) & 0xff; smp_req[9] = optsp->do_num & 0xff; smp_req[10] = ((optsp->start_rsa_index) >> 8) & 0xff; smp_req[11] = optsp->start_rsa_index & 0xff; smp_req[19] = optsp->phy_id; if (optsp->verbose) { fprintf(stderr, " Report expander route table request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) { if (0 == (k % 16)) fprintf(stderr, "\n "); else if (0 == (k % 8)) fprintf(stderr, " "); fprintf(stderr, "%02x ", smp_req[k]); } fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = max_resp_len; smp_rr.response = resp; res = smp_send_req(top, &smp_rr, optsp->verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == optsp->verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); return -1; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); return -1; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); return SMP_LIB_CAT_MALFORMED; } len = resp[3]; if ((0 == len) && (0 == resp[2])) { len = smp_get_func_def_resp_len(resp[1]); if (len < 0) { len = 0; if (optsp->verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (optsp->verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (optsp->do_hex || optsp->do_raw) { if (optsp->do_hex) dStrHex((const char *)resp, len, 1); else dStrRaw((const char *)resp, len); if (SMP_FRAME_TYPE_RESP != resp[0]) return SMP_LIB_CAT_MALFORMED; if (resp[1] != smp_req[1]) return SMP_LIB_CAT_MALFORMED; if (resp[2]) { if (optsp->verbose) fprintf(stderr, "Report expander route table result: %s\n", smp_get_func_res_str(resp[2], sizeof(b), b)); return resp[2]; } return 0; } if (SMP_FRAME_TYPE_RESP != resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", resp[0]); return SMP_LIB_CAT_MALFORMED; } if (resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], resp[1]); return SMP_LIB_CAT_MALFORMED; } if (resp[2]) { cp = smp_get_func_res_str(resp[2], sizeof(b), b); fprintf(stderr, "Report expander route table result: %s\n", cp); return resp[2]; } return 0; } int main(int argc, char * argv[]) { int res, c, len, exp_cc, sphy_id, num_desc, desc_len; int k, j, off, exp_rtcc; long long sa_ll; unsigned long long ull; char i_params[256]; char device_name[512]; unsigned char resp[1020 + 8]; struct smp_target_obj tobj; int subvalue = 0; char * cp; int ret = 0; struct opts_t opts; memset(&opts, 0, sizeof(opts)); opts.do_num = 62; /* maximum fitting in one response */ memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "bhHi:I:n:p:rs:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'b': ++opts.do_brief; break; case 'h': case '?': usage(); return 0; case 'H': ++opts.do_hex; break; case 'i': opts.start_rsa_index = smp_get_num(optarg); if ((opts.start_rsa_index < 0) || (opts.start_rsa_index > 65535)) { fprintf(stderr, "bad argument to '--index'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'n': opts.do_num = smp_get_num(optarg); if ((opts.do_num < 0) || (opts.do_num > 65535)) { fprintf(stderr, "bad argument to '--num'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'p': opts.phy_id = smp_get_num(optarg); if ((opts.phy_id < 0) || (opts.phy_id > 254)) { fprintf(stderr, "bad argument to '--phy', expect " "value from 0 to 254\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'r': ++opts.do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } opts.sa = (unsigned long long)sa_ll; if (opts.sa > 0) ++opts.sa_given; break; case 'v': ++opts.verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code %c [0x%x] ??\n", c, c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == opts.sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } opts.sa = (unsigned long long)sa_ll; } } if (opts.sa > 0) { if (! smp_is_naa5(opts.sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } res = smp_initiator_open(device_name, subvalue, i_params, opts.sa, &tobj, opts.verbose); if (res < 0) return SMP_LIB_FILE_ERROR; ret = do_rep_exp_rou_tbl(&tobj, resp, sizeof(resp), &opts); if (ret) goto finish; if (opts.do_hex || opts.do_raw) goto finish; len = (resp[3] * 4) + 4; /* length in bytes excluding CRC field */ exp_cc = (resp[4] << 8) + resp[5]; exp_rtcc = (resp[6] << 8) + resp[7]; desc_len = resp[10]; num_desc = resp[11]; sphy_id = resp[19]; printf("Report expander route table response header:\n"); if (! opts.do_brief) { printf(" expander change count: %d\n", exp_cc); printf(" expander route table change count: %d\n", exp_rtcc); printf(" self configuring: %d\n", !!(resp[8] & 0x8)); printf(" zone configuring: %d\n", !!(resp[8] & 0x4)); printf(" configuring: %d\n", !!(resp[8] & 0x2)); printf(" zone enabled: %d\n", !!(resp[8] & 0x1)); printf(" expander route table descriptor length: %d dwords\n", desc_len); } printf(" number of expander route table descriptors: %d\n", num_desc); printf(" first routed SAS address index: %d\n", (resp[12] << 8) + resp[13]); printf(" last routed SAS address index: %d\n", (resp[14] << 8) + resp[15]); printf(" starting phy id: %d\n", sphy_id); if (len != (32 + (num_desc * (desc_len * 4)))) { fprintf(stderr, ">>> Response length of %d bytes doesn't match " "%d descriptors, each\n of %d bytes plus a 32 byte " "header and 4 byte CRC\n", len + 4, num_desc, desc_len * 4); if (len < (32 + (num_desc * (desc_len * 4)))) { ret = SMP_LIB_CAT_MALFORMED; goto finish; } } for (k = 0; k < num_desc; ++k) { off = 32 + (k * (desc_len * 4)); printf(" descriptor index %d:\n", k); for (j = 0, ull = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= resp[off + j]; } printf(" routed SAS address: 0x%llx\n", ull); printf(" phy bit map: 0x"); for (j = 0; j < 6; ++j) printf("%02x", resp[off + 8 + j]); printf("\n"); printf(" zone group: %d\n", resp[off + 15]); } finish: res = smp_initiator_close(&tobj); if (res < 0) { if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (opts.verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_zone_lock.c0000664000175000017500000004544711675012613016303 0ustar douggdougg/* * Copyright (c) 2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a ZONE LOCK function and outputs its response. */ static char * version_str = "1.03 20111222"; static struct option long_options[] = { {"expected", 1, 0, 'E'}, {"fpass", 1, 0, 'F'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"inactivity", 1, 0, 'i'}, {"interface", 1, 0, 'I'}, {"password", 1, 0, 'P'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_zone_lock [--expected=EX] [--fpass=FP] [--help] [--hex]\n" " [--inactivity=TL] [--interface=PARAMS]\n" " [--password=PA] [--raw] " "[--sa=SAS_ADDR]\n" " [--verbose] [--version] SMP_DEVICE[,N]\n" " where:\n" " --expected=EX|-E EX set expected expander change " "count to EX\n" " --fpass=FP|-F FP file FP contains password, in hex or " "ASCII\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --inactivity=TL|-i TL TL is inactivity time limit " "(units: 100ms)\n" " (def: 0 -> no time limit)\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --password=PA|-P PA password PA in ASCII, padded with " "NULLs to\n" " be 32 bytes long (def: all NULLs)\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP ZONE LOCK function\n" ); } /* Read ASCII hex bytes from fname (a file named '-' taken as stdin). * There should be either one entry per line or a comma, space or tab * separated list of bytes. The first ASCII hex string detected has its * length checked; if the length is 1 or 2 then bytes are expected to * be space, comma or tab separated; if the length is 3 or more then a * string of ACSII hex digits is expected, 2 per byte. Everything from * and including a '#' on a line is ignored. If the first non-space * character on a line is quote or double quote then the ASCII string * up to the next quote or double quote on that line is translated to * binary (with each ASCII character translated to the binary byte * equivalent). Only the first such quoted ASCII string is translated. * If '-1' is detected at the start of a line then the rest of the * map_arr is filled with bytes of 0xff. Returns 0 if ok, or 1 if error. */ static int f2hex_arr(const char * fname, unsigned char * mp_arr, int * mp_arr_len, int max_arr_len) { int fn_len, in_len, k, j, m; int no_space = 0; int checked_hexlen = 0; unsigned int h; const char * lcp; char * cp; FILE * fp; char line[512]; int off = 0; if ((NULL == fname) || (NULL == mp_arr) || (NULL == mp_arr_len)) return 1; fn_len = strlen(fname); if (0 == fn_len) return 1; if ((1 == fn_len) && ('-' == fname[0])) /* read from stdin */ fp = stdin; else { fp = fopen(fname, "r"); if (NULL == fp) { fprintf(stderr, "Unable to open %s for reading\n", fname); return 1; } } for (j = 0; j < 512; ++j) { if (NULL == fgets(line, sizeof(line), fp)) break; in_len = strlen(line); if (in_len > 0) { if ('\n' == line[in_len - 1]) { --in_len; line[in_len] = '\0'; } } if (0 == in_len) continue; lcp = line; m = strspn(lcp, " \t"); if (m == in_len) continue; lcp += m; in_len -= m; if ('#' == *lcp) continue; if (('\'' == *lcp) || ('"' == *lcp)) goto astring; if (('-' == *lcp) && ('1' == *(lcp + 1))) goto minus1; if (! checked_hexlen) { ++checked_hexlen; k = strspn(lcp, "0123456789aAbBcCdDeEfF"); if (k > 2) no_space = 1; } k = strspn(lcp, "0123456789aAbBcCdDeEfF ,\t"); if ((k < in_len) && ('#' != lcp[k])) { fprintf(stderr, "f2hex_arr: syntax error at " "line %d, pos %d\n", j + 1, m + k + 1); goto bad; } if (no_space) { for (k = 0; isxdigit(*lcp) && isxdigit(*(lcp + 1)); ++k, lcp += 2) { if (1 != sscanf(lcp, "%2x", &h)) { fprintf(stderr, "f2hex_arr: bad hex number in line " "%d, pos %d\n", j + 1, (int)(lcp - line + 1)); goto bad; } if ((off + k) >= max_arr_len) { fprintf(stderr, "f2hex_arr: array length exceeded\n"); goto bad; } mp_arr[off + k] = h; } off += k; } else { for (k = 0; k < 1024; ++k) { if (1 == sscanf(lcp, "%x", &h)) { if (h > 0xff) { fprintf(stderr, "f2hex_arr: hex number " "larger than 0xff in line %d, pos %d\n", j + 1, (int)(lcp - line + 1)); goto bad; } if ((off + k) >= max_arr_len) { fprintf(stderr, "f2hex_arr: array length " "exceeded\n"); goto bad; } mp_arr[off + k] = h; lcp = strpbrk(lcp, " ,\t"); if (NULL == lcp) break; lcp += strspn(lcp, " ,\t"); if ('\0' == *lcp) break; } else { if ('#' == *lcp) { --k; break; } fprintf(stderr, "f2hex_arr: error in " "line %d, at pos %d\n", j + 1, (int)(lcp - line + 1)); goto bad; } } off += (k + 1); } } *mp_arr_len = off; fclose(fp); return 0; astring: cp = strchr(lcp + 1, *lcp); if (NULL == cp) { fprintf(stderr, "f2hex_arr: unterminated ASCII string on line " "%d, starts: %s\n", j + 1, lcp); goto bad; } k = (cp - lcp) - 1; if (k > 0) { if ((off + k) > max_arr_len) { fprintf(stderr, "f2hex_arr: array length exceeded\n"); goto bad; } memcpy(mp_arr + off, lcp + 1, k); } off += k; *mp_arr_len = off; fclose(fp); return 0; minus1: for (k = off; k < max_arr_len; ++k) mp_arr[k] = 0xff; *mp_arr_len = k; fclose(fp); return 0; bad: fclose(fp); return 1; } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, len, act_resplen; int expected_cc = 0; const char * fpass = NULL; int do_hex = 0; int inact_tl = 0; unsigned char password[32]; int do_raw = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_ZONE_LOCK, 0, 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, }; unsigned char smp_resp[20]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; int subvalue = 0; char * cp; int ret = 0; memset(password, 0, sizeof password); memset(device_name, 0, sizeof device_name); memset(smp_resp, 0, sizeof smp_resp); while (1) { int option_index = 0; c = getopt_long(argc, argv, "E:F:hHi:I:P:rs:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'E': expected_cc = smp_get_num(optarg); if ((expected_cc < 0) || (expected_cc > 65535)) { fprintf(stderr, "bad argument to '--expected'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'F': fpass = optarg; break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'i': inact_tl = smp_get_num(optarg); if ((inact_tl < 0) || (inact_tl > 65535)) { fprintf(stderr, "bad argument to '--inactivity'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'P': len = (int)strlen(optarg); if (len > 32) { fprintf(stderr, "argument to '--password' too long; " "max 32 got %d\n", len); return SMP_LIB_SYNTAX_ERROR; } memcpy(password , optarg, len); break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } if (fpass) { if (password[0]) { fprintf(stderr, "can't have both --fpass and --password " "options\n"); return SMP_LIB_SYNTAX_ERROR; } if (f2hex_arr(fpass, password, &len, sizeof(password))) { fprintf(stderr, "failed decoding --fpass=FP option\n"); return SMP_LIB_SYNTAX_ERROR; } } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; smp_req[2] = (sizeof(smp_resp) - 8) / 4; smp_req[4] = (expected_cc >> 8) & 0xff; smp_req[5] = expected_cc & 0xff; smp_req[6] = (inact_tl >> 8) & 0xff; smp_req[7] = inact_tl & 0xff; memcpy(smp_req + 8, password, 32); if (verbose) { fprintf(stderr, " Zone lock request:"); for (k = 0; k < (int)sizeof(smp_req); ++k) { if (0 == (k % 16)) fprintf(stderr, "\n "); else if (0 == (k % 8)) fprintf(stderr, " "); fprintf(stderr, "%02x ", smp_req[k]); } fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[2]) { if (verbose) fprintf(stderr, "Zone lock result: %s\n", smp_get_func_res_str(smp_resp[2], sizeof(b), b)); ret = smp_resp[2]; } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Zone lock result: %s\n", cp); ret = smp_resp[2]; if (smp_resp[8] | smp_resp[9] | smp_resp[10] | smp_resp[11]) { fprintf(stderr, "Active zone manager SAS address (hex): "); for (k = 0; k < 8; ++k) fprintf(stderr, "%02x", smp_resp[8 + k]); fprintf(stderr, "\n"); } goto err_out; } printf("Active zone manager SAS address (hex): "); for (k = 0; k < 8; ++k) printf("%02x", smp_resp[8 + k]); printf("\n"); err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_conf_general.c0000664000175000017500000003605111675012613016731 0ustar douggdougg/* * Copyright (c) 2006-2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a CONFIG GENERAL function and outputs its response. */ static char * version_str = "1.07 20111222"; /* spl2r01 */ static struct option long_options[] = { {"connect", 1, 0, 'c'}, {"expected", 1, 0, 'E'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"inactivity", 1, 0, 'i'}, {"interface", 1, 0, 'I'}, {"nexus", 1, 0, 'p'}, {"open", 1, 0, 'o'}, {"power", 1, 0, 'p'}, {"raw", 0, 0, 'r'}, {"reduced", 1, 0, 'R'}, {"sa", 1, 0, 's'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_conf_general [--connect=CO] [--expected=EX] [--help] " "[--hex]\n" " [--inactivity=IN] " "[--interface=PARAMS]\n" " [--nexus=NE] [--open=OP] [--power] " "[--raw]\n" " [--reduced=RE] [--sa=SAS_ADDR] " "[--verbose]\n" " [--version] SMP_DEVICE[,N]\n" " where:\n" " --connect=CO|-c CO STP maximum connect time limit " "(100 us)\n" " --expected=EX|-E EX set expected expander change " "count to EX\n" " --help|-h print out usage message then exit\n" " --hex|-H print response in hexadecimal\n" " --inactivity=IN|-i IN STP bus inactivity time " "limit (100 us)\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --nexus=NE|-n NE STP SMP I_T nexus loss time " "(ms)\n" " --open=OP|-o OP STP reject to open limit " "(10 us)\n" " --power=PD|-p PD power done timeout (unit: second)\n" " --raw|-r output response in binary\n" " --reduced=RE|-R RE initial time to reduced functionality " "(100 ms)\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). Depending " "on\n" " the interface, may not be " "needed\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP CONFIGURE GENERAL function\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, len, act_resplen; int expected_cc = 0; int do_connect = 0; int do_hex = 0; int do_inactivity = 0; int do_nexus = 0; int do_open = 0; int do_pdt = 0; int do_reduced = 0; int connect_val = 0; int inactivity_val = 0; int nexus_val = 0; int open_val = 0; int power_val = 0; int reduced_val = 0; int do_raw = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_CONFIG_GENERAL, 0, 4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; unsigned char smp_resp[8]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; int subvalue = 0; char * cp; int ret = 0; memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "c:E:hHi:I:n:o:p:rR:s:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'c': connect_val = smp_get_num(optarg); if ((connect_val < 0) || (connect_val > 65535)) { fprintf(stderr, "bad argument to '--connect'\n"); return SMP_LIB_SYNTAX_ERROR; } ++do_connect; break; case 'E': expected_cc = smp_get_num(optarg); if ((expected_cc < 0) || (expected_cc > 65535)) { fprintf(stderr, "bad argument to '--expected'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'i': inactivity_val = smp_get_num(optarg); if ((inactivity_val < 0) || (inactivity_val > 65535)) { fprintf(stderr, "bad argument to '--inactivity', expect " "value from 0 to 65535\n"); return SMP_LIB_SYNTAX_ERROR; } ++do_inactivity; break; case 'n': nexus_val = smp_get_num(optarg); if ((nexus_val < 0) || (nexus_val > 65535)) { fprintf(stderr, "bad argument to '--nexus', expect " "value from 0 to 65535\n"); return SMP_LIB_SYNTAX_ERROR; } ++do_nexus; break; case 'o': open_val = smp_get_num(optarg); if ((open_val < 0) || (open_val > 65535)) { fprintf(stderr, "bad argument to '--open', expect " "value from 0 to 65535\n"); return SMP_LIB_SYNTAX_ERROR; } ++do_open; break; case 'p': power_val = smp_get_num(optarg); if ((power_val < 0) || (power_val > 255)) { fprintf(stderr, "bad argument to '--power', expect " "value from 0 to 255\n"); return SMP_LIB_SYNTAX_ERROR; } ++do_pdt; break; case 'r': ++do_raw; break; case 'R': reduced_val = smp_get_num(optarg); if ((reduced_val < 0) || (reduced_val > 255)) { fprintf(stderr, "bad argument to '--reduced', expect " "value from 0 to 255\n"); return SMP_LIB_SYNTAX_ERROR; } ++do_reduced; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; smp_req[4] = (expected_cc >> 8) & 0xff; smp_req[5] = expected_cc & 0xff; if (do_connect) { smp_req[8] |= 0x2; smp_req[12] = (connect_val >> 8) & 0xff; smp_req[13] = connect_val & 0xff; } if (do_inactivity) { smp_req[8] |= 0x1; smp_req[10] = (inactivity_val >> 8) & 0xff; smp_req[11] = inactivity_val & 0xff; } if (do_nexus) { smp_req[8] |= 0x4; smp_req[14] = (nexus_val >> 8) & 0xff; smp_req[15] = nexus_val & 0xff; } if (do_open) { smp_req[8] |= 0x10; smp_req[18] = (open_val >> 8) & 0xff; smp_req[19] = open_val & 0xff; } if (do_pdt) { smp_req[8] |= 0x20; smp_req[17] = power_val & 0xff; } if (do_reduced) { smp_req[8] |= 0x8; smp_req[16] = reduced_val & 0xff; } if (verbose) { fprintf(stderr, " Configure general request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) { if (0 == (k % 16)) fprintf(stderr, "\n "); else if (0 == (k % 8)) fprintf(stderr, " "); fprintf(stderr, "%02x ", smp_req[k]); } fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[2]) { ret = smp_resp[2]; if (verbose) fprintf(stderr, "Configure general result: %s\n", smp_get_func_res_str(smp_resp[2], sizeof(b), b)); } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Configure general result: %s\n", cp); ret = smp_resp[2]; goto err_out; } err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_rep_manufacturer.c0000664000175000017500000002754611675012613017662 0ustar douggdougg/* * Copyright (c) 2006-2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a REPORT MANUFACTURER INFORMATION function and * outputs its response. */ static char * version_str = "1.10 20111222"; #define SMP_FN_REPORT_MANUFACTURER_RESP_LEN 64 static struct option long_options[] = { {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"interface", 1, 0, 'I'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {"zero", 0, 0, 'z'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_rep_manufacturer [--help] [--hex] [--interface=PARAMS] " "[--raw]\n" " [--sa=SAS_ADDR] [--verbose] " "[--version]\n" " [--zero] SMP_DEVICE[,N]\n" " where:\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n" " --zero|-z zero Allocated Response Length " "field,\n" " may be required prior to SAS-2\n\n" "Performs a SMP REPORT MANUFACTURER INFORMATION function\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, len, sas1_1, sas2, act_resplen; int do_hex = 0; int do_raw = 0; int verbose = 0; int do_zero = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_REPORT_MANUFACTURER, 0, 0, 0, 0, 0, 0}; unsigned char smp_resp[SMP_FN_REPORT_MANUFACTURER_RESP_LEN]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; int subvalue = 0; char * cp; int ret = 0; memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "hHI:p:rs:vVz", long_options, &option_index); if (c == -1) break; switch (c) { case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; case 'z': ++do_zero; break; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; if (! do_zero) { len = (sizeof(smp_resp) - 8) / 4; smp_req[2] = (len < 0x100) ? len : 0xff; } if (verbose) { fprintf(stderr, " Report manufacturer information request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) fprintf(stderr, "%02x ", smp_req[k]); fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[2]) { if (verbose) fprintf(stderr, "Report manufacturer information result: " "%s\n", smp_get_func_res_str(smp_resp[2], sizeof(b), b)); ret = smp_resp[2]; } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Report manufacturer information result: %s\n", cp); ret = smp_resp[2]; goto err_out; } sas1_1 = smp_resp[8] & 1; sas2 = !! (smp_resp[3]); printf("Report manufacturer response:\n"); if (sas2 || (verbose > 3)) { res = (smp_resp[4] << 8) + smp_resp[5]; if (verbose || res) printf(" Expander change count: %d\n", res); } printf(" SAS-1.1 format: %d\n", sas1_1); printf(" vendor identification: %.8s\n", smp_resp + 12); printf(" product identification: %.16s\n", smp_resp + 20); printf(" product revision level: %.4s\n", smp_resp + 36); if (sas1_1) { if (smp_resp[40]) printf(" component vendor identification: %.8s\n", smp_resp + 40); res = (smp_resp[48] << 8) + smp_resp[49]; if (res) printf(" component id: %d\n", res); if (smp_resp[50]) printf(" component revision level: %d\n", smp_resp[50]); } err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_rep_phy_err_log.c0000664000175000017500000003056211675012613017467 0ustar douggdougg/* * Copyright (c) 2006-2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a REPORT PHY ERROR LOG function and outputs its * response. */ static char * version_str = "1.12 20111222"; #define SMP_FN_REPORT_PHY_ERR_LOG_RESP_LEN 32 static struct option long_options[] = { {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"interface", 1, 0, 'I'}, {"phy", 1, 0, 'p'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {"zero", 0, 0, 'z'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_rep_phy_err_log [--help] [--hex] [--interface=PARAMS] " "[--phy=ID]\n" " [--raw] [--sa=SAS_ADDR] [--verbose] " "[--version]\n" " [--zero] SMP_DEVICE[,N]\n" " where:\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --phy=ID|-p ID phy identifier (def: 0)\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n" " --zero|-z zero Allocated Response Length " "field,\n" " may be required prior to SAS-2\n\n" "Performs a SMP REPORT PHY ERROR LOG function\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, len, act_resplen; int do_hex = 0; int phy_id = 0; int phy_id_given = 0; int do_raw = 0; int verbose = 0; int do_zero = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_REPORT_PHY_ERR_LOG, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; unsigned char smp_resp[SMP_FN_REPORT_PHY_ERR_LOG_RESP_LEN]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; int subvalue = 0; char * cp; int ret = 0; memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "hHI:p:rs:vVz", long_options, &option_index); if (c == -1) break; switch (c) { case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'p': phy_id = smp_get_num(optarg); if ((phy_id < 0) || (phy_id > 254)) { fprintf(stderr, "bad argument to '--phy', expect " "value from 0 to 254\n"); return SMP_LIB_SYNTAX_ERROR; } ++phy_id_given; break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; case 'z': ++do_zero; break; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; if (! do_zero) { /* SAS-2 or later */ len = (sizeof(smp_resp) - 8) / 4; smp_req[2] = (len < 0x100) ? len : 0xff; /* Allocated Response Len */ smp_req[3] = 2; /* Request Length: in dwords */ } smp_req[9] = phy_id; if (verbose) { fprintf(stderr, " Report phy error log request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) fprintf(stderr, "%02x ", smp_req[k]); fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[2]) { if (verbose) fprintf(stderr, "Report phy error log result: %s\n", smp_get_func_res_str(smp_resp[2], sizeof(b), b)); ret = smp_resp[2]; } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Report phy error log result%s: %s\n", (phy_id_given ? "" : " (for phy_id=0)"), cp); ret = smp_resp[2]; goto err_out; } printf("Report phy error log response:\n"); res = (smp_resp[4] << 8) + smp_resp[5]; if (verbose || res) printf(" Expander change count: %d\n", res); printf(" phy identifier: %d\n", smp_resp[9]); printf(" invalid dword count: %d\n", (smp_resp[12] << 24) + (smp_resp[13] << 16) + (smp_resp[14] << 8) + smp_resp[15]); printf(" running disparity error count: %d\n", (smp_resp[16] << 24) + (smp_resp[17] << 16) + (smp_resp[18] << 8) + smp_resp[19]); printf(" loss of dword synchronization count: %d\n", (smp_resp[20] << 24) + (smp_resp[21] << 16) + (smp_resp[22] << 8) + smp_resp[23]); printf(" phy reset problem count: %d\n", (smp_resp[24] << 24) + (smp_resp[25] << 16) + (smp_resp[26] << 8) + smp_resp[27]); err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_conf_zone_perm_tbl.c0000664000175000017500000005211511675012613020152 0ustar douggdougg/* * Copyright (c) 2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a CONFIGURE ZONE PERMISSION TABLE function and outputs * its response. */ static char * version_str = "1.04 20111222"; /* Permission table big enough for 256 source zone groups (rows) and * 256 destination zone groups (columns). Each element is a single bit, * written in the drafts as ZP[s,d] . */ static unsigned char full_perm_tbl[32 * 256]; static int sszg = 0; static int sszg_given = 0; static struct option long_options[] = { {"deduce", 0, 0, 'd'}, {"expected", 1, 0, 'E'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"interface", 1, 0, 'I'}, {"numzg", 1, 0, 'n'}, {"permf", 1, 0, 'P'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"save", 1, 0, 'S'}, {"start", 1, 0, 'f'}, /* note the short option: 'f' */ {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_conf_zone_perm_tbl [--deduce] [--expected=EX] [--help] " "[--hex]\n" " [--interface=PARAMS] [--numzg=NG] " "--permf=FN\n" " [--raw] [--sa=SAS_ADDR] " "[--save=SAV]\n" " [--start=SS] [--verbose] " "[--version]\n" " SMP_DEVICE[,N]\n" " where:\n" " --deduce|-d deduce number of zone groups from " "number\n" " of bytes on active FN lines\n" " --expected=EX|-E EX set expected expander change " "count to EX\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --numzg=NG|-n NG number of zone groups. NG should be " "0 (def)\n" " or 1. 0 -> 128 zone groups, 1 -> 256\n" " --permf=FN|-P FN FN is a file containing zone " "permission\n" " configuration descriptors in hex; " "required\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). Depending " "on\n" " the interface, may not be " "needed\n" " --save=SAV|-S SAV SAV: 0 -> shadow (def); 1 -> " "saved\n" " 2 -> shadow (and saved if " "supported))\n" " 3 -> shadow and saved\n" " --start=SS|-f SS starting (first) source zone group " "(def: 0)\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs one of more SMP CONFIGURE ZONE PERMISSION TABLE " "functions\n" ); } /* Read ASCII hex bytes from fname (a file named '-' taken as stdin). * There should be either one entry per line or a comma, space or tab * separated list of bytes. The first ASCII hex string detected has its * length checked; if the length is 1 or 2 then bytes are expected to * be space, comma or tab separated; if the length is 3 or more then a * string of ACSII hex digits is expected, 2 per byte. If any lines * contain more that 16 bytes (numzg256p is non-NULL), then 1 is written * to *numzg256p. Everything from and including a '#' and '-' on a line * is ignored. '#' is meant for comments. '-' is meant as a lead-in to an * option (e.g. "--start=8"); not yet implemented. * Returns 0 if ok, or 1 if error. */ static int f2hex_arr(const char * fname, unsigned char * mp_arr, int * mp_arr_len, int max_arr_len, int * numzg256p, int verbose) { int fn_len, in_len, k, j, m; int no_space = 0; int checked_hexlen = 0; int numzg256 = 0; unsigned int h; const char * lcp; FILE * fp; char line[512]; int off = 0; if ((NULL == fname) || (NULL == mp_arr) || (NULL == mp_arr_len)) return 1; fn_len = strlen(fname); if (0 == fn_len) return 1; if ((1 == fn_len) && ('-' == fname[0])) /* read from stdin */ fp = stdin; else { fp = fopen(fname, "r"); if (NULL == fp) { fprintf(stderr, "Unable to open %s for reading\n", fname); return 1; } } for (j = 0; j < 512; ++j) { if (NULL == fgets(line, sizeof(line), fp)) break; in_len = strlen(line); if (in_len > 0) { if ('\n' == line[in_len - 1]) { --in_len; line[in_len] = '\0'; } } if (0 == in_len) continue; lcp = line; m = strspn(lcp, " \t"); if (m == in_len) continue; lcp += m; in_len -= m; if ('#' == *lcp) continue; if ('-' == *lcp) { if (0 == strncmp("--start=", lcp, 8)) { if (1 == sscanf(lcp, "--start=%d", &k)) { if (sszg_given && (k != sszg)) { fprintf(stderr, "permission file '--start=%d' " "contradicts command line '--start=%d'\n", k, sszg); goto bad; } if (verbose) fprintf(stderr, "permission file contains " "--start=%d, using it\n", k); sszg = k; } else if (verbose) fprintf(stderr, "found line with '-' but " "could not decode --start=\n"); } continue; } if (! checked_hexlen) { ++checked_hexlen; k = strspn(lcp, "0123456789aAbBcCdDeEfF"); if (k > 2) no_space = 1; } k = strspn(lcp, "0123456789aAbBcCdDeEfF ,\t"); if ((k < in_len) && ('#' != lcp[k]) && ('-' != lcp[k])) { fprintf(stderr, "f2hex_arr: syntax error at " "line %d, pos %d\n", j + 1, m + k + 1); goto bad; } if (no_space) { for (k = 0; isxdigit(*lcp) && isxdigit(*(lcp + 1)); ++k, lcp += 2) { if (1 != sscanf(lcp, "%2x", &h)) { fprintf(stderr, "f2hex_arr: bad hex number in line " "%d, pos %d\n", j + 1, (int)(lcp - line + 1)); goto bad; } if ((off + k) >= max_arr_len) { fprintf(stderr, "f2hex_arr: array length exceeded\n"); goto bad; } mp_arr[off + k] = h; } if (k > 16) ++numzg256; off += k; } else { for (k = 0; k < 1024; ++k) { if (1 == sscanf(lcp, "%x", &h)) { if (h > 0xff) { fprintf(stderr, "f2hex_arr: hex number " "larger than 0xff in line %d, pos %d\n", j + 1, (int)(lcp - line + 1)); goto bad; } if ((off + k) >= max_arr_len) { fprintf(stderr, "f2hex_arr: array length " "exceeded\n"); goto bad; } mp_arr[off + k] = h; lcp = strpbrk(lcp, " ,\t"); if (NULL == lcp) break; lcp += strspn(lcp, " ,\t"); if ('\0' == *lcp) break; } else { if (('#' == *lcp) || ('-' == *lcp)) { --k; break; } fprintf(stderr, "f2hex_arr: error in " "line %d, at pos %d\n", j + 1, (int)(lcp - line + 1)); goto bad; } } if (k > 15) ++numzg256; off += (k + 1); } } *mp_arr_len = off; fclose(fp); if (numzg256p) *numzg256p = !! numzg256; return 0; bad: fclose(fp); return 1; } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, j, len, num_desc, numd, desc_len, numzg256; int max_desc_per_req, act_resplen; const char * permf = NULL; int deduce = 0; int expected_cc = 0; int do_hex = 0; int num_zg = 128; int num_zg_given = 0; int do_raw = 0; int do_save = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[1028]; unsigned char smp_resp[8]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; int subvalue = 0; char * cp; int ret = 0; memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "dE:f:hHI:n:P:rs:S:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'd': ++deduce; break; case 'E': expected_cc = smp_get_num(optarg); if ((expected_cc < 0) || (expected_cc > 65535)) { fprintf(stderr, "bad argument to '--expected'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'f': /* maps tp '--start=SS' */ sszg = smp_get_num(optarg); if ((sszg < 0) || (sszg > 255)) { fprintf(stderr, "bad argument to '--start'\n"); return SMP_LIB_SYNTAX_ERROR; } ++sszg_given; break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'n': k = smp_get_num(optarg); switch (k) { case 0: num_zg = 128; break; case 1: num_zg = 256; break; default: fprintf(stderr, "bad argument to '--numzg'\n"); return SMP_LIB_SYNTAX_ERROR; } ++num_zg_given; break; case 'P': permf = optarg; break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'S': do_save = smp_get_num(optarg); if ((do_save < 0) || (do_save > 3)) { fprintf(stderr, "bad argument to '--save'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } if (NULL == permf) { fprintf(stderr, "--permf=FN option is required (i.e. it's not " "optional)\n"); return SMP_LIB_SYNTAX_ERROR; } if (deduce && num_zg_given) { fprintf(stderr, "can't give both --deduce and --numzg=\n"); return SMP_LIB_SYNTAX_ERROR; } if (f2hex_arr(permf, full_perm_tbl, &len, sizeof full_perm_tbl, &numzg256, verbose)) { fprintf(stderr, "failed decoding --permf=FN option\n"); return SMP_LIB_SYNTAX_ERROR; } if (deduce && numzg256) num_zg = 256; desc_len = (128 == num_zg) ? 16 : 32; num_desc = len / desc_len; if (0 != (len % desc_len)) fprintf(stderr, "warning: permf data not a multiple of %d bytes, " "ignore excess\n", desc_len); max_desc_per_req = (128 == num_zg) ? 63 : 31; res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; for (j = 0; j < num_desc; j += max_desc_per_req) { numd = num_desc - j; if (numd > max_desc_per_req) numd = max_desc_per_req; memset(smp_req, 0, sizeof(smp_req)); smp_req[0] = SMP_FRAME_TYPE_REQ; smp_req[1] = SMP_FN_CONFIG_ZONE_PERMISSION_TBL; smp_req[3] = (numd * (desc_len / 4)) + 3; smp_req[4] = (expected_cc >> 8) & 0xff; smp_req[5] = expected_cc & 0xff; smp_req[6] = sszg + j; smp_req[7] = numd; smp_req[8] = (do_save & 0x3); if (256 == num_zg) smp_req[8] |= 0x40; smp_req[9] = (256 == num_zg) ? 8 : 4; memcpy(smp_req + 16, full_perm_tbl + (j * desc_len), numd * desc_len); if (verbose) { fprintf(stderr, " Configure zone permission table request:"); for (k = 0; k < (20 + (numd * desc_len)); ++k) { if (0 == (k % 16)) fprintf(stderr, "\n "); else if (0 == (k % 8)) fprintf(stderr, " "); fprintf(stderr, "%02x ", smp_req[k]); } fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = 20 + (numd * desc_len); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than " "deduced length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[2]) { if (verbose) fprintf(stderr, "Configure zone permission table result: " "%s\n", smp_get_func_res_str(smp_resp[2], sizeof(b), b)); ret = smp_resp[2]; } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Configure zone permission table result: %s\n", cp); ret = smp_resp[2]; goto err_out; } } err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_phy_test.c0000664000175000017500000003605411675012613016151 0ustar douggdougg/* * Copyright (c) 2006-2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a PHY TEST FUNCTION function and outputs its response. */ static char * version_str = "1.11 20111222"; /* sync with sas2r15 */ static struct option long_options[] = { {"control", 1, 0, 'c'}, {"dwords", 1, 0, 'd'}, {"expected", 1, 0, 'E'}, {"function", 1, 0, 'f'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"interface", 1, 0, 'I'}, {"linkrate", 1, 0, 'l'}, {"pattern", 1, 0, 'P'}, {"phy", 1, 0, 'p'}, {"sa", 1, 0, 's'}, {"sata", 0, 0, 't'}, {"spread", 1, 0, 'S'}, {"raw", 0, 0, 'r'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_phy_test [--control=CO] [--dwords=DW] [--expected=EX]\n" " [--function=FN] [--help] [--hex] " "[--interface=PARAMS]\n" " [--linkrate=LR] [--pattern=PA] [--phy=ID]\n" " [--raw] [--sa=SAS_ADDR] [--sata] " "[--spread=SP]\n" " [--verbose] [--version] SMP_DEVICE[,N]\n" " where:\n" " --control=CO|-c CO phy test pattern dwords control " "(def: 0)\n" " --dwords=DW|-d DW phy test pattern dwords (def:0)\n" " --expected=EX|-E EX set expected expander change count " "to EX\n" " --function=FN|-f FN phy test function (def:0 -> stop)\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --linkrate=LR|-l LR physical link rate (def: 9 -> " "3 Gbps)\n" " --pattern=PA|-P PA phy test pattern (def: 2 -> " "CJTPAT)\n" " --phy=ID|-p ID phy identifier (def: 0)\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). Depending " "on the\n" " interface, may not be needed\n" " --sata|-t set phy test function SATA bit " "(def: 0)\n" " --spread=SC|-S SC set phy test function SCC to SC " "(def: 0)\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP PHY TEST FUNCTION function\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, len, act_resplen; int do_control = 0; unsigned long long dwords = 0; int expected_cc = 0; int do_function = 0; int do_hex = 0; int linkrate = 9; /* 3 Gbps */ int pattern = 2; /* CJTPAT */ int phy_id = 0; int do_raw = 0; int do_sata = 0; int do_ssc = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_PHY_TEST_FUNCTION, 0, 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, }; unsigned char smp_resp[8]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; int subvalue = 0; char * cp; int ret = 0; memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "c:d:E:f:hHI:l:p:P:rs:S:tvV", long_options, &option_index); if (c == -1) break; switch (c) { case 'c': do_control = smp_get_num(optarg); if ((do_control < 0) || (do_control > 255)) { fprintf(stderr, "bad argument to '--control', expect " "value from 0 to 255\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'd': if (0 == strcmp("-1", optarg)) dwords = 0xffffffffffffffffULL; else { sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--dwords'\n"); return SMP_LIB_SYNTAX_ERROR; } dwords = (unsigned long long)sa_ll; } break; case 'E': expected_cc = smp_get_num(optarg); if ((expected_cc < 0) || (expected_cc > 65535)) { fprintf(stderr, "bad argument to '--expected'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'f': do_function = smp_get_num(optarg); if ((do_function < 0) || (do_function > 255)) { fprintf(stderr, "bad argument to '--function', expect " "value from 0 to 255\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'l': linkrate = smp_get_num(optarg); if ((linkrate < 0) || (linkrate > 15)) { fprintf(stderr, "bad argument to '--linkrate', expect " "value from 0 to 15\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'p': phy_id = smp_get_num(optarg); if ((phy_id < 0) || (phy_id > 254)) { fprintf(stderr, "bad argument to '--phy', expect " "value from 0 to 254\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'P': pattern = smp_get_num(optarg); if ((pattern < 0) || (pattern > 255)) { fprintf(stderr, "bad argument to '--pattern', expect " "value from 0 to 255\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'S': do_ssc = smp_get_num(optarg); if ((do_ssc < 0) || (do_ssc > 3)) { fprintf(stderr, "bad argument to '--spread', expect " "value from 0 to 3\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 't': ++do_sata; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; smp_req[4] = (expected_cc >> 8) & 0xff; smp_req[5] = expected_cc & 0xff; smp_req[9] = phy_id; smp_req[10] = do_function; smp_req[11] = pattern; smp_req[15] = linkrate & 0xf; smp_req[15] |= (do_ssc << 4) & 0x30; smp_req[15] |= (do_sata << 6) & 0x40; smp_req[19] = do_control; for (k = 0; k < 8; ++k, dwords >>= 8) smp_req[20 + 7 - k] = dwords & 0xff; if (verbose) { fprintf(stderr, " Phy test function request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) { if (0 == (k % 16)) fprintf(stderr, "\n "); else if (0 == (k % 8)) fprintf(stderr, " "); fprintf(stderr, "%02x ", smp_req[k]); } fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[2]) { if (verbose) fprintf(stderr, "Phy test function result: %s\n", smp_get_func_res_str(smp_resp[2], sizeof(b), b)); ret = smp_resp[2]; } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Phy test function result: %s\n", cp); ret = smp_resp[2]; goto err_out; } err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_read_gpio.c0000664000175000017500000003501211675012613016234 0ustar douggdougg/* * Copyright (c) 2006-2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a READ GPIO REGISTER or READ GPIO REGISTER ENHANCED * request and outputs its response. The READ GPIO REGISTER function is * defined in SFF-8485 0.7 [2006/02/01]. * * Based on a comment by Rob Elliott in this t10 document : 08-212r8.pdf * (page 871 or 552) the ENHANCED variant request has its 4-byte header * changed to comply with other SAS-2 SMP requests. This will increase * the byte position by 2 of the register type, index and count fields. */ static char * version_str = "1.09 20111222"; #define SMP_MAX_RESP_LEN (1020 + 4 + 4) static struct option long_options[] = { {"count", 1, 0, 'c'}, {"enhanced", 0, 0, 'E'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"index", 1, 0, 'i'}, {"interface", 1, 0, 'I'}, {"phy", 1, 0, 'p'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"type", 0, 0, 't'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_read_gpio [--count=CO] [--enhanced] [--help] [--hex]\n" " [--index=IN] [--interface=PARAMS] [--raw]\n" " [--sa=SAS_ADDR] [type=TY] [--verbose] " "[--version]\n" " SMP_DEVICE[,N]\n" " where:\n" " --count=CO|-c CO register count (dwords to read) " "(def: 1)\n" " --enhanced|-E use READ GPIO REGISTER ENHANCED " "function\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --index=IN|-i IN register index (def: 0)\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP target " "(use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n" " --type=TY|-t TY register type (def: 0 (GPIO_CFG))\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP READ GPIO REGISTER (default) or READ GPIO " "REGISTER ENHANCED\nfunction\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, len, off, decoded, act_resplen; int rcount = 1; int enhanced = 0; int do_hex = 0; int rindex = 0; int phy_id = 0; int do_raw = 0; int rtype = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_READ_GPIO_REG, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; unsigned char smp_resp[SMP_MAX_RESP_LEN]; struct smp_target_obj tobj; struct smp_req_resp smp_rr; int subvalue = 0; char * cp; int ret = 0; char b[128]; memset(device_name, 0, sizeof device_name); memset(i_params, 0, sizeof i_params); while (1) { int option_index = 0; c = getopt_long(argc, argv, "c:EhHi:I:p:rs:t:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'c': rcount = smp_get_num(optarg); if ((rcount < 1) || (rcount > 255)) { fprintf(stderr, "bad argument to '--count'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'E': ++enhanced; break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'i': rindex = smp_get_num(optarg); if ((rindex < 0) || (rindex > 255)) { fprintf(stderr, "bad argument to '--index'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'p': phy_id = smp_get_num(optarg); if ((phy_id < 0) || (phy_id > 254)) { fprintf(stderr, "bad argument to '--phy', expect " "value from 0 to 254\n"); return SMP_LIB_SYNTAX_ERROR; } if (verbose) fprintf(stderr, "'--phy=' option not needed so " "ignored\n"); break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 't': rtype = smp_get_num(optarg); if ((rtype < 0) || (rtype > 255)) { fprintf(stderr, "bad argument to '--type'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; if (enhanced) { smp_req[1] = SMP_FN_READ_GPIO_REG_ENH; smp_req[2] = rcount; /* response payload in dwords */ smp_req[3] = 0x1; /* 12 byte request */ off = 2; } else off = 0; smp_req[2 + off] = rtype; smp_req[3 + off] = rindex; smp_req[4 + off] = rcount; if (verbose) { fprintf(stderr, " Read GPIO register%s request: ", (enhanced ? " enhanced" : "")); for (k = 0; k < (int)sizeof(smp_req); ++k) fprintf(stderr, "%02x ", smp_req[k]); fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (enhanced) { len = smp_resp[3]; if ((len != rcount) && verbose) fprintf(stderr, "requested %d dwords but received %d\n", rcount, len); } else len = rcount; len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[2]) ret = smp_resp[2]; goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { ret = smp_resp[2]; cp = smp_get_func_res_str(ret, sizeof(b), b); fprintf(stderr, "Read gpio register%s result: %s\n", (enhanced ? " enhanced" : ""), cp); goto err_out; } printf("Read GPIO register%s response:\n", (enhanced ? " enhanced" : "")); decoded = 0; if (0 == rtype) { off = 4; if (0 == rindex) { printf(" GPIO_CFG[0]:\n"); printf(" version: %d\n", (smp_resp[off + 1] & 0xf)); printf(" GPIO enable: %d\n", !!(smp_resp[off + 2] & 0x80)); printf(" cfg register count: %d\n", ((smp_resp[off + 2] >> 4) & 0x7)); printf(" gp register count: %d\n", (smp_resp[off + 2] & 0xf)); printf(" supported drive count: %d\n", smp_resp[off + 3]); ++decoded; off += 4; } if ((1 == rindex) || ((0 == rindex) && (rcount > 1))) { printf(" GPIO_CFG[1]:\n"); printf(" blink generator rate B: %d\n", ((smp_resp[off + 1] >> 4) & 0xf)); printf(" blink generator rate A: %d\n", (smp_resp[off + 1] & 0xf)); printf(" force activity off: %d\n", ((smp_resp[off + 2] >> 4) & 0xf)); printf(" maximum activity on: %d\n", (smp_resp[off + 2] & 0xf)); printf(" stretch activity off: %d\n", ((smp_resp[off + 3] >> 4) & 0xf)); printf(" stretch activity on: %d\n", (smp_resp[off + 3] & 0xf)); ++decoded; } } if (rcount > decoded) { fprintf(stderr, " only simple cfg registers decoded, others were " "requested\n"); fprintf(stderr, " use either '--hex' or '--raw' option to " "output other registers\n"); } err_out: res = smp_initiator_close(&tobj); if (res < 0) { if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/Makefile.am0000664000175000017500000001034711665236170015325 0ustar douggdougg ## Copied from sg3_utils. Some remnants left commented out as examples ## if OS_LINUX # install binaries in a sbin directory (e.g. /usr/sbin). If there # are utilities that don't need superuser, then they could be # placed in bin_PROGRAMS . sbin_PROGRAMS = \ smp_conf_general smp_conf_phy_event smp_conf_route_info \ smp_conf_zone_man_pass smp_conf_zone_perm_tbl \ smp_conf_zone_phy_info smp_discover smp_discover_list \ smp_ena_dis_zoning smp_phy_control smp_phy_test \ smp_read_gpio smp_rep_broadcast smp_rep_exp_route_tbl \ smp_rep_general smp_rep_manufacturer smp_rep_phy_err_log \ smp_rep_phy_event smp_rep_phy_event_list smp_rep_phy_sata \ smp_rep_route_info smp_rep_self_conf_stat \ smp_rep_zone_man_pass smp_rep_zone_perm_tbl smp_write_gpio \ smp_zone_activate smp_zoned_broadcast smp_zone_lock \ smp_zone_unlock ## distclean-local: ## rm -f sg_scan.c ## sg_scan.c : sg_scan.c.linux ## cp sg_scan.c.linux sg_scan.c ## endif AM_CFLAGS = -I ../include -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -W # AM_CFLAGS = -I ../include -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -W -pedantic -std=c99 smp_conf_general_SOURCES = smp_conf_general.c smp_conf_general_LDADD = ../lib/libsmputils1.la @os_libs@ smp_conf_phy_event_SOURCES = smp_conf_phy_event.c smp_conf_phy_event_LDADD = ../lib/libsmputils1.la @os_libs@ smp_conf_route_info_SOURCES = smp_conf_route_info.c smp_conf_route_info_LDADD = ../lib/libsmputils1.la @os_libs@ smp_conf_zone_man_pass_SOURCES = smp_conf_zone_man_pass.c smp_conf_zone_man_pass_LDADD = ../lib/libsmputils1.la @os_libs@ smp_conf_zone_perm_tbl_SOURCES = smp_conf_zone_perm_tbl.c smp_conf_zone_perm_tbl_LDADD = ../lib/libsmputils1.la @os_libs@ smp_conf_zone_phy_info_SOURCES = smp_conf_zone_phy_info.c smp_conf_zone_phy_info_LDADD = ../lib/libsmputils1.la @os_libs@ smp_discover_SOURCES = smp_discover.c smp_discover_LDADD = ../lib/libsmputils1.la @os_libs@ smp_discover_list_SOURCES = smp_discover_list.c smp_discover_list_LDADD = ../lib/libsmputils1.la @os_libs@ smp_ena_dis_zoning_SOURCES = smp_ena_dis_zoning.c smp_ena_dis_zoning_LDADD = ../lib/libsmputils1.la @os_libs@ smp_phy_control_SOURCES = smp_phy_control.c smp_phy_control_LDADD = ../lib/libsmputils1.la @os_libs@ smp_phy_test_SOURCES = smp_phy_test.c smp_phy_test_LDADD = ../lib/libsmputils1.la @os_libs@ smp_read_gpio_SOURCES = smp_read_gpio.c smp_read_gpio_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_broadcast_SOURCES = smp_rep_broadcast.c smp_rep_broadcast_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_exp_route_tbl_SOURCES = smp_rep_exp_route_tbl.c smp_rep_exp_route_tbl_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_general_SOURCES = smp_rep_general.c smp_rep_general_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_manufacturer_SOURCES = smp_rep_manufacturer.c smp_rep_manufacturer_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_phy_err_log_SOURCES = smp_rep_phy_err_log.c smp_rep_phy_err_log_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_phy_event_SOURCES = smp_rep_phy_event.c smp_rep_phy_event_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_phy_event_list_SOURCES = smp_rep_phy_event_list.c smp_rep_phy_event_list_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_phy_sata_SOURCES = smp_rep_phy_sata.c smp_rep_phy_sata_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_route_info_SOURCES = smp_rep_route_info.c smp_rep_route_info_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_self_conf_stat_SOURCES = smp_rep_self_conf_stat.c smp_rep_self_conf_stat_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_zone_man_pass_SOURCES = smp_rep_zone_man_pass.c smp_rep_zone_man_pass_LDADD = ../lib/libsmputils1.la @os_libs@ smp_rep_zone_perm_tbl_SOURCES = smp_rep_zone_perm_tbl.c smp_rep_zone_perm_tbl_LDADD = ../lib/libsmputils1.la @os_libs@ smp_write_gpio_SOURCES = smp_write_gpio.c smp_write_gpio_LDADD = ../lib/libsmputils1.la @os_libs@ smp_zone_activate_SOURCES = smp_zone_activate.c smp_zone_activate_LDADD = ../lib/libsmputils1.la @os_libs@ smp_zoned_broadcast_SOURCES = smp_zoned_broadcast.c smp_zoned_broadcast_LDADD = ../lib/libsmputils1.la @os_libs@ smp_zone_lock_SOURCES = smp_zone_lock.c smp_zone_lock_LDADD = ../lib/libsmputils1.la @os_libs@ smp_zone_unlock_SOURCES = smp_zone_unlock.c smp_zone_unlock_LDADD = ../lib/libsmputils1.la @os_libs@ smp_utils-0.97/src/smp_rep_self_conf_stat.c0000664000175000017500000004246611675012613020155 0ustar douggdougg/* * Copyright (c) 2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a REPORT SELF-CONFIGURATION STATUS function and * outputs its response. */ static char * version_str = "1.02 20111222"; #define SMP_FN_REPORT_SELF_CONFIG_RESP_LEN (1020 + 4 + 4) static struct option long_options[] = { {"brief", 0, 0, 'b'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"index", 1, 0, 'i'}, {"interface", 1, 0, 'I'}, {"last", 0, 0, 'l'}, {"one", 0, 0, 'o'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_rep_self_conf_stat [--brief] [--help] [--hex] [--index=SDI]\n" " [--interface=PARAMS] [--last] " "[--one] [raw]\n" " [--sa=SAS_ADDR] [--verbose] " "[--version]\n" " SMP_DEVICE[,N]\n" " where:\n" " --brief|-b lessen the amount output\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --index=SDI|-i SDI SDI is starting self-configuration " "status\n" " descriptor index (def: 1)\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --last|-l output descriptors starting at last " "recorded\n" " --one|-o only output first descriptor\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending\n" " on the interface, may not be " "needed\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP REPORT SELF-CONFIGURATION STATUS function\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } static char * find_status_description(int status, char * buff, int buff_len) { const char * cp = NULL; switch (status) { case 0x0: cp = "reserved"; break; case 0x1: cp = "error not related to a specific layer"; break; case 0x2: cp = "trying to connect to SMP target {SA}"; break; case 0x3: cp = "route table full, unable to add {SA}"; break; case 0x4: cp = "expander out of resources"; break; case 0x20: cp = "error reported by phy layer"; break; case 0x21: cp = "all phys including {PI} lost dword sync"; break; case 0x40: cp = "error reported by link layer"; break; case 0x41: cp = "open timeout timer expired"; break; case 0x42: cp = "received an abandon-class open-reject"; break; case 0x43: cp = "vendor specific number of retry-class"; break; case 0x44: cp = "I_T nexus loss occurred"; break; case 0x45: cp = "connection request, received break"; break; case 0x46: cp = "SMP response frame CRC error"; break; case 0x60: cp = "error reported by port layer"; break; case 0x61: cp = "SMP response frame timeout"; break; case 0x80: cp = "error reported by SMP transport layer"; break; case 0xa0: cp = "error reported by management app layer"; break; case 0xa1: cp = "SMP response frame is too short"; break; case 0xa2: cp = "SMP response contains invalid fields"; break; case 0xa3: cp = "SMP response contains inconsistent fields"; break; case 0xa4: cp = "{SA} has configuring bit set"; break; case 0xa5: cp = "{SA} has self configuring bit set"; break; case 0xa6: cp = "{SA} has zone configuring bit set"; break; default: if (status < 0x20) cp = "reserved for status not related to specific layer"; else if (status < 0x40) cp = "reserved for status reported by phy layer"; else if (status < 0x60) cp = "reserved for status reported by link layer"; else if (status < 0x80) cp = "reserved for status reported by port layer"; else if (status < 0xa0) cp = "reserved for status reported by SMP transport layer"; else if (status < 0xc0) cp = "reserved for status reported by management app layer"; else if (status < 0xe0) cp = "reserved"; else cp = "vendor specific"; } if (buff) { if (cp && (buff_len > 0)) { strncpy(buff, cp, buff_len - 1); buff[buff_len - 1] = '\0'; } else if (buff_len > 0) buff[0] = '\0'; } return buff; } int main(int argc, char * argv[]) { int res, c, k, j, len, sscsd_ind, last_scsd_ind, scsd_len, num_scsd; int tot_num_scsd, ind, status, act_resplen; int do_brief = 0; int do_hex = 0; int index = 1; int do_last = 0; int do_one = 0; int do_raw = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_REPORT_SELF_CONFIG, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0}; unsigned char smp_resp[SMP_FN_REPORT_SELF_CONFIG_RESP_LEN]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; int subvalue = 0; char * cp; const char * last_recp; unsigned char * scsdp; int ret = 0; memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "bhHi:I:lors:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'b': ++do_brief; break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'i': index = smp_get_dhnum(optarg); if ((index < 0) || (index > 65535)) { fprintf(stderr, "bad argument to '--index', expect " "value from 0 to 65535\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'l': ++do_last; break; case 'o': ++do_one; break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; last_again: len = (sizeof(smp_resp) - 8) / 4; smp_req[2] = (len < 0x100) ? len : 0xff; /* Allocated Response Len */ smp_req[6] = (index >> 8) & 0xff; smp_req[7] = index & 0xff; if (verbose) { fprintf(stderr, " Report self-configuration status request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) fprintf(stderr, "%02x ", smp_req[k]); fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", smp_rr.act_response_len); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; if (smp_resp[2]) { ret = smp_resp[2]; if (verbose) fprintf(stderr, "Report self-configuration status result: " "%s\n", smp_get_func_res_str(ret, sizeof(b), b)); } if (! (do_last && (0 == ret))) goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Report self-configuration status result: %s\n", cp); ret = smp_resp[2]; goto err_out; } last_scsd_ind = (smp_resp[10] << 8) + smp_resp[11]; if ((do_last > 0) && (last_scsd_ind > 0) && (index != last_scsd_ind)) { --do_last; memset(smp_req, 0, sizeof(smp_req)); smp_req[0] = SMP_FRAME_TYPE_REQ; smp_req[1] = SMP_FN_REPORT_SELF_CONFIG; smp_req[3] = 1; index = last_scsd_ind; goto last_again; } printf("Report self-configuration status response:\n"); res = (smp_resp[4] << 8) + smp_resp[5]; if (verbose || res) printf(" Expander change count: %d\n", res); sscsd_ind = (smp_resp[6] << 8) + smp_resp[7]; if (0 == do_brief) printf(" starting self-configuration status descriptor index: %d\n", sscsd_ind); tot_num_scsd = (smp_resp[8] << 8) + smp_resp[9]; printf(" total number of self-configuration status descriptors: %d\n", tot_num_scsd); if (0 == do_brief) { printf(" last self-configuration status descriptor index: %d\n", last_scsd_ind); printf(" self-configuration status descriptor length: %d dwords\n", smp_resp[12]); } if (16 == smp_resp[12]) { if (0 == do_brief) printf(" <>\n"); scsd_len = smp_resp[12]; } else scsd_len = smp_resp[12] * 4; num_scsd = smp_resp[19]; printf(" number of self-configuration status descriptors: %d\n", num_scsd); if (scsd_len < 16) { fprintf(stderr, "Unexpectedly low descriptor length: %d bytes\n", scsd_len); ret = -1; goto err_out; } scsdp = smp_resp + 20; for (k = 0, ind = sscsd_ind; k < num_scsd; ++k, scsdp += scsd_len) { status = scsdp[0]; last_recp = (ind == last_scsd_ind) ? ">>> " : ""; if (do_brief) printf(" %s%d [%d]: status=0x%x flag=%d pi=%d sa=0x", last_recp, k + 1, ind, status, scsdp[1] & 1, scsdp[3]); else { printf(" Descriptor %d [%sindex=%d]:\n", k + 1, last_recp, ind); printf(" status: %s [0x%x]\n", find_status_description(status, b, sizeof(b)), status); printf(" final: %d\n", scsdp[1] & 1); printf(" phy id: %d\n", scsdp[3]); printf(" sas address: 0x"); } for (j = 0; j < 8; ++j) printf("%02x", scsdp[8 + j]); printf("\n"); if (verbose > 1) { printf(" in hex: "); for (j = 0; j < scsd_len; ++j) printf("%02x ", scsdp[j]); printf("\n"); } if (ind > 0xfffe) ind = 1; else ++ind; if (do_one) break; } err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_rep_phy_event.c0000664000175000017500000004416011675012613017156 0ustar douggdougg/* * Copyright (c) 2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a REPORT PHY EVENT function and outputs its * response. */ static char * version_str = "1.07 20111222"; #define SMP_FN_REPORT_PHY_EVENT_RESP_LEN (1020 + 4 + 4) struct pes_name_t { int pes; /* phy event source, an 8 bit number */ const char * pes_name; }; static struct option long_options[] = { {"desc", 0, 0, 'd'}, {"enumerate", 0, 0, 'e'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"interface", 1, 0, 'I'}, {"long", 0, 0, 'l'}, {"phy", 1, 0, 'p'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static struct pes_name_t pes_name_arr[] = { {0x0, "No event"}, /* Phy layer-based phy events (0x1 to 0x1F) */ {0x1, "Invalid word count"}, {0x2, "Running disparity error count"}, {0x3, "Loss of dword synchronization count"}, {0x4, "Phy reset problem count"}, {0x5, "Elasticity buffer overflow count"}, {0x6, "Received ERROR count"}, /* SAS arbitration-based phy events (0x20 to 0x3F) */ {0x20, "Received address frame error count"}, {0x21, "Transmitted abandon-class OPEN_REJECT count"}, {0x22, "Received abandon-class OPEN_REJECT count"}, {0x23, "Transmitted retry-class OPEN_REJECT count"}, {0x24, "Received retry-class OPEN_REJECT count"}, {0x25, "Received AIP (WATING ON PARTIAL) count"}, {0x26, "Received AIP (WAITING ON CONNECTION) count"}, {0x27, "Transmitted BREAK count"}, {0x28, "Received BREAK count"}, {0x29, "Break timeout count"}, {0x2a, "Connection count"}, {0x2b, "Peak transmitted pathway blocked count"}, /*PVD */ {0x2c, "Peak transmitted arbitration wait time"}, /*PVD */ {0x2d, "Peak arbitration time"}, /*PVD */ {0x2e, "Peak connection time"}, /*PVD */ /* SSP related phy events (0x40 to 0x4F) */ {0x40, "Transmitted SSP frame count"}, {0x41, "Received SSP frame count"}, {0x42, "Transmitted SSP frame error count"}, {0x43, "Received SSP frame error count"}, {0x44, "Transmitted CREDIT_BLOCKED count"}, {0x45, "Received CREDIT_BLOCKED count"}, /* SATA related phy events (0x50 to 0x5F) */ {0x50, "Transmitted SATA frame count"}, {0x51, "Received SATA frame count"}, {0x52, "SATA flow control buffer overflow count"}, /* SMP related phy events (0x60 to 0x6F) */ {0x60, "Transmitted SMP frame count"}, {0x61, "Received SMP frame count"}, {0x63, "Received SMP frame error count"}, /* Reserved 0x70 to 0xCF) */ /* Vendor specific 0xD0 to 0xFF) */ {-1, NULL} }; static void usage(void) { fprintf(stderr, "Usage: " "smp_rep_phy_event [--desc] [--enumerate] [--help] [--hex]\n" " [--interface=PARAMS] [--long] " "[--phy=ID] [--raw]\n" " [--sa=SAS_ADDR] [--verbose] " "[--version]\n" " SMP_DEVICE[,N]\n" " where:\n" " --desc|-d show descriptor number in output\n" " --enumerate|-e enumerate phy event source names, " "ignore\n" " SMP_DEVICE if given\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --long|-l show phy event source hex value in " "output\n" " --phy=ID|-p ID phy identifier (def: 0)\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP REPORT PHY EVENT function\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } static const char * get_pes_name(int pes, char * b, int blen) { int len; const char * res = NULL; const struct pes_name_t * pnp; if ((NULL == b) || (blen < 1)) return res; for (pnp = pes_name_arr; pnp->pes_name; ++pnp) { if (pes == pnp->pes) { len = strlen(pnp->pes_name); if (len > (blen - 1)) len = blen - 1; memcpy(b, pnp->pes_name, len); b[len] = '\0'; return b; } } return res; } /* from sas2r15 */ static void show_phy_event_info(int pes, unsigned int val, unsigned int thresh_val, int do_long) { unsigned int u; char str[32]; char b[80]; const char * cp; memset(str, 0, sizeof(str)); if (do_long) snprintf(str, sizeof(str) - 1, "[0x%x] ", (unsigned int)pes); switch (pes) { case 0: printf(" %sNo event\n", str); break; case 0x1: case 0x2: case 0x3: case 0x4: case 0x5: case 0x6: case 0x20: case 0x21: case 0x22: case 0x23: case 0x24: case 0x25: case 0x26: case 0x27: case 0x28: case 0x29: case 0x2a: case 0x40: case 0x41: case 0x42: case 0x43: case 0x44: case 0x45: case 0x50: case 0x51: case 0x52: case 0x60: case 0x61: case 0x63: if ((cp = get_pes_name(pes, b, sizeof(b)))) printf(" %s%s: %u\n", str, cp, val); else printf(" %sUnknown Phy Event Source [0x%x]: %u\n", str, pes, val); break; case 0x2b: printf(" %s%s: %u\n", str, get_pes_name(pes, b, sizeof(b)), val & 0xff); printf(" Peak value detector threshold: %u\n", thresh_val & 0xff); break; case 0x2c: cp = get_pes_name(pes, b, sizeof(b)); u = val & 0xffff; if (u < 0x8000) printf(" %s%s (us): %u\n", str, cp, u); else printf(" %s%s (ms): %u\n", str, cp, 33 + (u - 0x8000)); u = thresh_val & 0xffff; if (u < 0x8000) printf(" Peak value detector threshold (us): %u\n", u); else printf(" Peak value detector threshold (ms): %u\n", 33 + (u - 0x8000)); break; case 0x2d: printf(" %s%s (us): %u\n", str, get_pes_name(pes, b, sizeof(b)), val); printf(" Peak value detector threshold: %u\n", thresh_val); break; case 0x2e: printf(" %s%s (us): %u\n", str, get_pes_name(pes, b, sizeof(b)), val); printf(" Peak value detector threshold: %u\n", thresh_val); break; default: printf(" Unknown phy event source: 0x%x, val=%u, thresh_val=%u\n", pes, val, thresh_val); break; } } int main(int argc, char * argv[]) { int res, c, k, len, ped_len, num_ped, pes, act_resplen; int do_desc = 0; int do_enumerate = 0; int do_hex = 0; int do_long = 0; int phy_id = 0; int phy_id_given = 0; int do_raw = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_REPORT_PHY_EVENT, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; unsigned char smp_resp[SMP_FN_REPORT_PHY_EVENT_RESP_LEN]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; const struct pes_name_t * pnp; int subvalue = 0; unsigned int pe_val, pvdt; char * cp; unsigned char * pedp; int ret = 0; memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "dehHI:lp:rs:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'd': ++do_desc; break; case 'e': ++do_enumerate; break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'l': ++do_long; break; case 'p': phy_id = smp_get_num(optarg); if ((phy_id < 0) || (phy_id > 254)) { fprintf(stderr, "bad argument to '--phy', expect " "value from 0 to 254\n"); return SMP_LIB_SYNTAX_ERROR; } ++phy_id_given; break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (do_enumerate) { printf("Phy Event Source names (preceded by hex value):\n"); for (pnp = pes_name_arr; pnp->pes_name; ++pnp) printf(" [0x%02x] %s\n", pnp->pes, pnp->pes_name); return 0; } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; len = (sizeof(smp_resp) - 8) / 4; smp_req[2] = (len < 0x100) ? len : 0xff; /* Allocated Response Len */ smp_req[9] = phy_id; if (verbose) { fprintf(stderr, " Report phy event request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) fprintf(stderr, "%02x ", smp_req[k]); fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; if (smp_resp[2]) { ret = smp_resp[2]; if (verbose) fprintf(stderr, "Report phy event result: %s\n", smp_get_func_res_str(ret, sizeof(b), b)); } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Report phy event result%s: %s\n", (phy_id_given ? "" : " (for phy_id=0)"), cp); ret = smp_resp[2]; goto err_out; } printf("Report phy event response:\n"); res = (smp_resp[4] << 8) + smp_resp[5]; if (verbose || res) printf(" Expander change count: %d\n", res); printf(" phy identifier: %d\n", smp_resp[9]); printf(" phy event descriptor length: %d dwords\n", smp_resp[14]); ped_len = smp_resp[14] * 4; num_ped = smp_resp[15]; printf(" number of phy event descriptors: %d\n", num_ped); if (ped_len < 12) { fprintf(stderr, "Unexpectedly low descriptor length: %d bytes, " "assume 12 bytes\n", ped_len); ped_len = 12; /* prototype SXP 36x6Gsec (PMC) has this problem */ } pedp = smp_resp + 16; for (k = 0; k < num_ped; ++k, pedp += ped_len) { if (do_desc) printf(" Descriptor %d:\n", k + 1); pes = pedp[3]; pe_val = (pedp[4] << 24) | (pedp[5] << 16) | (pedp[6] << 8) | pedp[7]; pvdt = (pedp[8] << 24) | (pedp[9] << 16) | (pedp[10] << 8) | pedp[11]; show_phy_event_info(pes, pe_val, pvdt, do_long); } err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_conf_phy_event.c0000664000175000017500000006304411675012613017317 0ustar douggdougg/* * Copyright (c) 2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a CONFIGURE PHY EVENT function and outputs * its response. */ static char * version_str = "1.00 20111222"; #define MAX_PHY_EV_SRC 126 /* max in one request */ struct pes_name_t { int pes; /* phy event source, an 8 bit number */ const char * pes_name; }; static struct option long_options[] = { {"clear", 0, 0, 'C'}, {"enumerate", 0, 0, 'e'}, {"expected", 1, 0, 'E'}, {"file", 1, 0, 'f'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"interface", 1, 0, 'I'}, {"pes", 1, 0, 'P'}, {"phy", 1, 0, 'p'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"thres", 1, 0, 'T'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static struct pes_name_t pes_name_arr[] = { {0x0, "No event"}, /* Phy layer-based phy events (0x1 to 0x1F) */ {0x1, "Invalid word count"}, {0x2, "Running disparity error count"}, {0x3, "Loss of dword synchronization count"}, {0x4, "Phy reset problem count"}, {0x5, "Elasticity buffer overflow count"}, {0x6, "Received ERROR count"}, /* SAS arbitration-based phy events (0x20 to 0x3F) */ {0x20, "Received address frame error count"}, {0x21, "Transmitted abandon-class OPEN_REJECT count"}, {0x22, "Received abandon-class OPEN_REJECT count"}, {0x23, "Transmitted retry-class OPEN_REJECT count"}, {0x24, "Received retry-class OPEN_REJECT count"}, {0x25, "Received AIP (WATING ON PARTIAL) count"}, {0x26, "Received AIP (WAITING ON CONNECTION) count"}, {0x27, "Transmitted BREAK count"}, {0x28, "Received BREAK count"}, {0x29, "Break timeout count"}, {0x2a, "Connection count"}, {0x2b, "Peak transmitted pathway blocked count"}, /*PVD */ {0x2c, "Peak transmitted arbitration wait time"}, /*PVD */ {0x2d, "Peak arbitration time"}, /*PVD */ {0x2e, "Peak connection time"}, /*PVD */ /* SSP related phy events (0x40 to 0x4F) */ {0x40, "Transmitted SSP frame count"}, {0x41, "Received SSP frame count"}, {0x42, "Transmitted SSP frame error count"}, {0x43, "Received SSP frame error count"}, {0x44, "Transmitted CREDIT_BLOCKED count"}, {0x45, "Received CREDIT_BLOCKED count"}, /* SATA related phy events (0x50 to 0x5F) */ {0x50, "Transmitted SATA frame count"}, {0x51, "Received SATA frame count"}, {0x52, "SATA flow control buffer overflow count"}, /* SMP related phy events (0x60 to 0x6F) */ {0x60, "Transmitted SMP frame count"}, {0x61, "Received SMP frame count"}, {0x63, "Received SMP frame error count"}, /* Reserved 0x70 to 0xCF) */ /* Vendor specific 0xD0 to 0xFF) */ {-1, NULL} }; static void usage(void) { fprintf(stderr, "Usage: " "smp_conf_phy_event [--clear] [--enumerate] [--expected=EX]\n" " [--file=FILE] [--help] [--hex]\n" " [--interface=PARAMS] " "[--pes=PES,PES...]\n" " [--phy=ID] [--raw] [--sa=SAS_ADDR]\n" " [--thres=THR,THR...] [--verbose] " "[--version]\n" " SMP_DEVICE[,N]\n" " where:\n" " --clear|-C clear all peak value detectors for " "this phy\n" " --enumerate|-e enumerate phy event source names, " "ignore\n" " SMP_DEVICE if given\n" " --expected=EX|-E EX set expected expander change " "count to EX\n" " --file=FILE|-f FILE read PES, THR pairs from FILE\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --pes=PES,PES...|-P PES,PES... comma separated list " "of Phy\n" " Event Sources\n" " --phy=ID|-p ID phy identifier (def: 0)\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n" " --thres=THR,THR...|-T THR,THR... comma separated list " "of peak\n" " value detector " "thresholds\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP CONFIGURE PHY EVENT function\n" ); } /* Fetches unsigned int and returns it if found, with *err set to 0 if * err is non-NULL. If unable to decode returns 0, with *err set to 1 if * err is non-NULL. Assumes number is decimal unless prefixed by '0x' (or * '0X') or has a trailing 'h' (or 'H') in which case it is assumed to be * hexadecimal. */ unsigned int get_unum(const char * buf, int * err) { int res, len; unsigned unum; if ((NULL == buf) || ('\0' == buf[0])) { if (err) *err = 1; return 0; } len = strspn(buf, "0123456789aAbBcCdDeEfFhHxX"); if (0 == len) { if (err) *err = 1; return 0; } if (('0' == buf[0]) && (('x' == buf[1]) || ('X' == buf[1]))) res = sscanf(buf + 2, "%x", &unum); else if ('H' == toupper(buf[len - 1])) res = sscanf(buf, "%x", &unum); else res = sscanf(buf, "%u", &unum); if (1 == res) { if (err) *err = 0; return unum; } else { if (err) *err = 1; return 0; } } /* Read numbers (up to 8 bits in size) from command line (comma (or * (single) space) separated list). Assumed decimal unless prefixed * by '0x', '0X' or contains trailing 'h' or 'H' (which indicate hex). * Returns 0 if ok, or 1 if error. */ static int build_pes_arr(const char * inp, unsigned char * pes_arr, int * pes_arr_len, int max_arr_len) { int in_len, k, err; const char * lcp; unsigned int unum; char * cp; char * c2p; if ((NULL == inp) || (NULL == pes_arr) || (NULL == pes_arr_len)) return 1; lcp = inp; in_len = strlen(inp); if (0 == in_len) *pes_arr_len = 0; if ('-' == inp[0]) { /* read from stdin */ fprintf(stderr, "'--pes' cannot be read from stdin\n"); return 1; } else { /* list of numbers (default decimal) on command line */ k = strspn(inp, "0123456789aAbBcCdDeEfFhHxX, "); if (in_len != k) { fprintf(stderr, "build_pes_arr: error at pos %d\n", k + 1); return 1; } for (k = 0; k < max_arr_len; ++k) { unum = get_unum(lcp, &err); if ((! err) && (unum < 256)) { pes_arr[k] = (unsigned char)unum; cp = strchr(lcp, ','); c2p = strchr(lcp, ' '); if (NULL == cp) cp = c2p; if (NULL == cp) break; if (c2p && (c2p < cp)) cp = c2p; lcp = cp + 1; } else { fprintf(stderr, "build_pes_arr: error at pos %d\n", (int)(lcp - inp + 1)); return 1; } } *pes_arr_len = k + 1; if (k == max_arr_len) { fprintf(stderr, "build_pes_arr: array length exceeded\n"); return 1; } } return 0; } /* Read numbers (up to 32 bits in size) from command line (comma (or * (single) space) separated list). Assumed decimal unless prefixed * by '0x', '0X' or contains trailing 'h' or 'H' (which indicate hex). * Returns 0 if ok, or 1 if error. */ static int build_thres_arr(const char * inp, unsigned int * thres_arr, int * thres_arr_len, int max_arr_len) { int in_len, k, err; const char * lcp; unsigned int unum; char * cp; char * c2p; if ((NULL == inp) || (NULL == thres_arr) || (NULL == thres_arr_len)) return 1; lcp = inp; in_len = strlen(inp); if (0 == in_len) *thres_arr_len = 0; if ('-' == inp[0]) { /* read from stdin */ fprintf(stderr, "'--thres' cannot be read from stdin\n"); return 1; } else { /* list of numbers (default decimal) on command line */ k = strspn(inp, "0123456789aAbBcCdDeEfFhHxX, "); if (in_len != k) { fprintf(stderr, "build_thres_arr: error at pos %d\n", k + 1); return 1; } for (k = 0; k < max_arr_len; ++k) { unum = get_unum(lcp, &err); if (! err) { thres_arr[k] = unum; cp = strchr(lcp, ','); c2p = strchr(lcp, ' '); if (NULL == cp) cp = c2p; if (NULL == cp) break; if (c2p && (c2p < cp)) cp = c2p; lcp = cp + 1; } else { fprintf(stderr, "build_thres_arr: error at pos %d\n", (int)(lcp - inp + 1)); return 1; } } *thres_arr_len = k + 1; if (k == max_arr_len) { fprintf(stderr, "build_num_arr: array length exceeded\n"); return 1; } } return 0; } /* Read numbers from filename (or stdin) line by line (comma (or * (single) space) separated list). Assumed decimal unless prefixed * by '0x', '0X' or contains trailing 'h' or 'H' (which indicate hex). * Returns 0 if ok, or 1 if error. */ static int build_joint_arr(const char * file_name, unsigned char * pes_arr, unsigned int * thres_arr, int * arr_len, int max_arr_len) { char line[512]; int off = 0; int in_len, k, j, m, have_stdin, ind, bit0, err; char * lcp; FILE * fp; unsigned int unum; have_stdin = ((1 == strlen(file_name)) && ('-' == file_name[0])); if (have_stdin) fp = stdin; else { fp = fopen(file_name, "r"); if (NULL == fp) { fprintf(stderr, "build_joint_arr: unable to open %s\n", file_name); return 1; } } for (j = 0; j < 512; ++j) { if (NULL == fgets(line, sizeof(line), fp)) break; in_len = strlen(line); if (in_len > 0) { if ('\n' == line[in_len - 1]) { --in_len; line[in_len] = '\0'; } } if (0 == in_len) continue; lcp = line; m = strspn(lcp, " \t"); if (m == in_len) continue; lcp += m; in_len -= m; if ('#' == *lcp) continue; k = strspn(lcp, "0123456789aAbBcCdDeEfFhHxX ,\t"); if ((k < in_len) && ('#' != lcp[k])) { fprintf(stderr, "build_joint_arr: syntax error at " "line %d, pos %d\n", j + 1, m + k + 1); return 1; } for (k = 0; k < 1024; ++k) { unum = get_unum(lcp, &err); if (! err) { ind = ((off + k) >> 1); bit0 = 0x1 & (off + k); if (ind >= max_arr_len) { fprintf(stderr, "build_joint_arr: array length " "exceeded\n"); return 1; } if (bit0) thres_arr[ind] = unum; else { if (unum > 255) { fprintf(stderr, "build_joint_arr: pes (%u) too " "large\n", unum); return 1; } pes_arr[ind] = (unsigned char)unum; } lcp = strpbrk(lcp, " ,\t"); if (NULL == lcp) break; lcp += strspn(lcp, " ,\t"); if ('\0' == *lcp) break; } else { if ('#' == *lcp) { --k; break; } fprintf(stderr, "build_joint_arr: error in " "line %d, at pos %d\n", j + 1, (int)(lcp - line + 1)); return 1; } } off += (k + 1); } if (0x1 & off) { fprintf(stderr, "build_joint_arr: expect LBA,NUM pairs but decoded " "odd number\n from %s\n", have_stdin ? "stdin" : file_name); return 1; } *arr_len = off >> 1; return 0; } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, j, len, num_desc, act_resplen, pes_elem, thres_elem; int do_clear = 0; int do_enumerate = 0; int expected_cc = 0; int do_hex = 0; int phy_id = 0; int do_raw = 0; int verbose = 0; const char * file_op = NULL; const char * pes_op = NULL; const char * thres_op = NULL; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char pes_arr[MAX_PHY_EV_SRC]; unsigned int thres_arr[MAX_PHY_EV_SRC]; unsigned char smp_req[1028]; unsigned char smp_resp[8]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; const struct pes_name_t * pnp; int subvalue = 0; char * cp; int ret = 0; memset(smp_req, 0, sizeof(smp_req)); memset(pes_arr, 0, sizeof(pes_arr)); memset(thres_arr, 0, sizeof(thres_arr)); smp_req[0] = SMP_FRAME_TYPE_REQ; smp_req[1] = SMP_FN_CONFIG_PHY_EVENT; memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "CeE:f:hHI:p:P:rs:S:T:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'C': ++do_clear; break; case 'e': ++do_enumerate; break; case 'E': expected_cc = smp_get_num(optarg); if ((expected_cc < 0) || (expected_cc > 65535)) { fprintf(stderr, "bad argument to '--expected'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'f': if (file_op) { fprintf(stderr, "only expected one '--file=' option\n"); return SMP_LIB_SYNTAX_ERROR; } file_op = optarg; break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'p': phy_id = smp_get_num(optarg); if ((phy_id < 0) || (phy_id > 254)) { fprintf(stderr, "bad argument to '--phy'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'P': if (pes_op) { fprintf(stderr, "only expected one '--pes=' option\n"); return SMP_LIB_SYNTAX_ERROR; } pes_op = optarg; break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'T': if (thres_op) { fprintf(stderr, "only expected one '--thres=' option\n"); return SMP_LIB_SYNTAX_ERROR; } thres_op = optarg; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (do_enumerate) { printf("Phy Event Source names (preceded by hex value):\n"); for (pnp = pes_name_arr; pnp->pes_name; ++pnp) printf(" [0x%02x] %s\n", pnp->pes, pnp->pes_name); return 0; } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after seperator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } if ((0 == do_clear) && (! file_op) && (! pes_op)) fprintf(stderr, "warning: without --clear, --file and --pes not " "much will happen\n"); if (file_op && pes_op) { fprintf(stderr, "can use either --file= or --pes= but not both\n"); return SMP_LIB_SYNTAX_ERROR; } if (file_op && thres_op) fprintf(stderr, "warning: ignoring --thres= and taking threshold " "values from --file= argument\n"); pes_elem = 0; thres_elem = 0; if (pes_op) { if (build_pes_arr(pes_op, pes_arr, &pes_elem, MAX_PHY_EV_SRC)) return SMP_LIB_SYNTAX_ERROR; if (thres_op) { if (build_thres_arr(thres_op, thres_arr, &thres_elem, MAX_PHY_EV_SRC)) return SMP_LIB_SYNTAX_ERROR; } if (thres_elem > pes_elem) fprintf(stderr, "warning: more threshold elements (%d) than " "phy event source elements (%d)\n", thres_elem, pes_elem); } if (file_op) { if (build_joint_arr(file_op, pes_arr, thres_arr, &pes_elem, MAX_PHY_EV_SRC)) return SMP_LIB_SYNTAX_ERROR; } num_desc = pes_elem; res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; smp_req[3] = (num_desc * 2) + 2; smp_req[4] = (expected_cc >> 8) & 0xff; smp_req[5] = expected_cc & 0xff; smp_req[6] = do_clear ? 1 : 0; smp_req[9] = phy_id; smp_req[10] = 2; /* descriptor 2 dwords long */ smp_req[11] = num_desc; for (k = 0, j = 12; k < num_desc; ++k, j += 8) { smp_req[j + 3] = pes_arr[k]; smp_req[j + 4] = (thres_arr[k] >> 24) & 0xff; smp_req[j + 5] = (thres_arr[k] >> 16) & 0xff; smp_req[j + 6] = (thres_arr[k] >> 8) & 0xff; smp_req[j + 7] = thres_arr[k] & 0xff; } if (verbose) { fprintf(stderr, " Configure phy event request:"); for (k = 0; k < (16 + (num_desc * 8)); ++k) { if (0 == (k % 16)) fprintf(stderr, "\n "); else if (0 == (k % 8)) fprintf(stderr, " "); fprintf(stderr, "%02x ", smp_req[k]); } fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = 16 + (num_desc * 8); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[2]) { if (verbose) fprintf(stderr, "Configure zone phy information result: %s\n", smp_get_func_res_str(smp_resp[2], sizeof(b), b)); ret = smp_resp[2]; } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Configure zone phy information result: %s\n", cp); ret = smp_resp[2]; goto err_out; } err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_rep_broadcast.c0000664000175000017500000003067311675012613017123 0ustar douggdougg/* * Copyright (c) 2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a REPORT BROADCAST function and outputs its response. */ static char * version_str = "1.02 20111222"; #define SMP_FN_REPORT_BROADCAST_RESP_LEN (1020 + 4 + 4) static struct option long_options[] = { {"broadcast", 1, 0, 'b'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"interface", 1, 0, 'I'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_rep_broadcast [--broadcast=BT] [--help] [--hex]\n" " [--interface=PARAMS] [raw] " "[--sa=SAS_ADDR]\n" " [--verbose] [--version] " "SMP_DEVICE[,N]\n" " where:\n" " --broadcast=RT|-b RT RT is report type (def: 0 " "which is\n" " Broadcast(Change))\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending\n" " on the interface, may not be " "needed\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP REPORT BROADCAST function\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, j, len, bd_len, num_bd, btype_hdr, act_resplen; int do_hex = 0; int btype = 0; int do_raw = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_REPORT_BROADCAST, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0}; unsigned char smp_resp[SMP_FN_REPORT_BROADCAST_RESP_LEN]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; int subvalue = 0; char * cp; unsigned char * bdp; int ret = 0; memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "b:hHI:rs:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'b': btype = smp_get_dhnum(optarg); if ((btype < 0) || (btype > 15)) { fprintf(stderr, "bad argument to '--broadcast', expect " "value from 0 to 15\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; len = (sizeof(smp_resp) - 8) / 4; smp_req[2] = (len < 0x100) ? len : 0xff; /* Allocated Response Len */ smp_req[4] = btype & 0xf; if (verbose) { fprintf(stderr, " Report broadcast request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) fprintf(stderr, "%02x ", smp_req[k]); fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; if (smp_resp[2]) { ret = smp_resp[2]; if (verbose) fprintf(stderr, "Report broadcast result: %s\n", smp_get_func_res_str(ret, sizeof(b), b)); } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Report broadcast result: %s\n", cp); ret = smp_resp[2]; goto err_out; } printf("Report broadcast response:\n"); res = (smp_resp[4] << 8) + smp_resp[5]; if (verbose || res) printf(" Expander change count: %d\n", res); btype_hdr = smp_resp[6] & 0xf; printf(" broadcast type: %d\n", btype_hdr); printf(" broadcast descriptor length: %d dwords\n", smp_resp[10]); bd_len = smp_resp[10] * 4; num_bd = smp_resp[11]; printf(" number of broadcast descriptors: %d\n", num_bd); if (bd_len < 8) { fprintf(stderr, "Unexpectedly low descriptor length: %d bytes\n", bd_len); ret = -1; goto err_out; } bdp = smp_resp + 12; for (k = 0; k < num_bd; ++k, bdp += bd_len) { printf(" Descriptor %d:\n", k + 1); if (verbose || (btype_hdr != (bdp[0] & 0xf))) printf(" broadcast type: %d\n", bdp[0] & 0xf); if (0xff == bdp[1]) printf(" no specific phy id\n"); else printf(" phy id: %d\n", bdp[1]); printf(" broadcast reason: %d\n", bdp[2] & 0xf); printf(" broadcast count: %d\n", (bdp[4] << 8) + bdp[5]); if (verbose > 1) { printf(" "); for (j = 0; j < bd_len; ++j) printf("%02x ", bdp[j]); printf("\n"); } } err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_ena_dis_zoning.c0000664000175000017500000003133411675012613017274 0ustar douggdougg/* * Copyright (c) 2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a ENABLE DISABLE ZONING function and outputs its * response. */ static char * version_str = "1.05 20111222"; static struct option long_options[] = { {"disable", 0, 0, 'd'}, {"ena-dis", 1, 0, 'e'}, {"expected", 1, 0, 'E'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"interface", 1, 0, 'I'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"save", 1, 0, 'S'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_ena_dis_zoning [--disable] [--ena-dis=ED] [--expected=EX] " "[--help]\n" " [--hex] [--interface=PARAMS] [--raw]\n" " [--sa=SAS_ADDR] [--save=SAV] " "[--verbose]\n" " [--version] SMP_DEVICE[,N]\n" " where:\n" " --disable|-d disable zoning (equivalent to " "'--ena-dis=2')\n" " --ena-dis=ED|-e ED ED: 0 -> no change; 1 -> enable " "zoning (def)\n" " 2 -> disable zoning\n" " --expected=EX|-E EX set expected expander change " "count to EX\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n" " --save=SAV|-S SAV SAV: 0 -> shadow (def); 1 -> " "saved\n" " 2 -> shadow (and saved if " "supported))\n" " 3 -> shadow and saved\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP ENABLE DISABLE ZONING function. Default action " "(when no\noptions given) is to enable zoning.\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, len, act_resplen; int disable = 0; int ena_dis = 1; /* what is the point of ena_dis=0 (no change)? */ int ena_dis_given = 0; int expected_cc = 0; int do_hex = 0; int do_raw = 0; int do_save = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_ENABLE_DISABLE_ZONING, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, }; unsigned char smp_resp[8]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; int subvalue = 0; char * cp; int ret = 0; memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "de:E:hHI:rs:S:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'd': ++disable; break; case 'e': ena_dis = smp_get_num(optarg);; if ((ena_dis < 0) || (ena_dis > 3)) { fprintf(stderr, "bad argument to '--ena-dis'\n"); return SMP_LIB_SYNTAX_ERROR; } ++ena_dis_given; break; case 'E': expected_cc = smp_get_num(optarg); if ((expected_cc < 0) || (expected_cc > 65535)) { fprintf(stderr, "bad argument to '--expected'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'S': do_save = smp_get_num(optarg); if ((do_save < 0) || (do_save > 3)) { fprintf(stderr, "bad argument to '--save'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } if (disable) { if (ena_dis_given && (2 != ena_dis)) { fprintf(stderr, "'--disable' and '--ena-dis=ED' contradict, use " "one or other\n"); return SMP_LIB_SYNTAX_ERROR; } ena_dis = 2; } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; smp_req[4] = (expected_cc >> 8) & 0xff; smp_req[5] = expected_cc & 0xff; smp_req[6] = do_save & 0x3; smp_req[8] = ena_dis & 0x3; if (verbose) { fprintf(stderr, " Enable disable zoning request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) fprintf(stderr, "%02x ", smp_req[k]); fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[2]) { if (verbose) fprintf(stderr, "Enable disable zoning result: %s\n", smp_get_func_res_str(smp_resp[2], sizeof(b), b)); ret = smp_resp[2]; } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Enable disable zoning result: %s\n", cp); ret = smp_resp[2]; goto err_out; } err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_discover.c0000664000175000017500000012227211675012613016126 0ustar douggdougg/* * Copyright (c) 2006-2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a DISCOVER function and outputs its response. * * Defined in SAS-2 (most recent draft sas2r16.pdf) and SPL which defines * the upper layers of SAS-2.1 . The most recent SPL draft is spl-r07.pdf . */ static char * version_str = "1.34 20111221"; /* spl2r03 */ #define SMP_FN_DISCOVER_RESP_LEN 124 struct opts_t { int do_adn; int do_brief; int do_hex; int ign_zp; int do_list; int multiple; int do_my; int do_num; int phy_id; int phy_id_given; int do_raw; int do_summary; int verbose; int do_zero; int sa_given; unsigned long long sa; }; static struct option long_options[] = { {"adn", 0, 0, 'A'}, {"brief", 0, 0, 'b'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"ignore", 0, 0, 'i'}, {"interface", 1, 0, 'I'}, {"list", 0, 0, 'l'}, {"multiple", 0, 0, 'm'}, {"my", 0, 0, 'M'}, {"num", 1, 0, 'n'}, {"phy", 1, 0, 'p'}, {"sa", 1, 0, 's'}, {"summary", 0, 0, 'S'}, {"raw", 0, 0, 'r'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {"zero", 0, 0, 'z'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_discover [--adn] [--brief] [--help] [--hex] [--ignore]\n" " [--interface=PARAMS] [--list] [--my] " "[--multiple]\n" " [--num=NUM] [--phy=ID] [--raw] " "[--sa=SAS_ADDR]\n" " [--summary] [--verbose] [--version] " "[--zero]\n" " SMP_DEVICE[,N]\n" " where:\n" " --adn|-A output attached device name in one " "line per\n" " phy mode (i.e. with --multiple)\n" " --brief|-b less output, can be used multiple " "times\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --ignore|-i sets the Ignore Zone Group bit; " "will show\n" " phys otherwise hidden by zoning\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --list|-l output attribute=value, 1 per line\n" " --multiple|-m query multiple phys, output 1 line " "for each\n" " --my|-M output my (expander's) SAS address\n" " --num=NUM|-n NUM number of phys to fetch when '-m' " "is given\n" " (def: 0 -> the rest)\n" " --phy=ID|-p ID phy identifier [or starting phy id]\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). Depending " "on\n" " the interface, may not be " "needed\n" " --summary|-S query phys, output 1 line for each " "active one,\n" " equivalent to '--multiple --brief' " "('-mb').\n" " This option is assumed if '--phy=ID' " "not given\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n" " --zero|-z zero Allocated Response Length " "field,\n" " may be required prior to SAS-2\n\n" "Sends one or more SMP DISCOVER functions. If '--phy=ID' not " "given then\n'--summary' is assumed. The '--summary' option " "shows the disposition\nof each active expander phy in table " "form.\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } static char * smp_attached_device_type[] = { "no device attached", "end device", "expander device", /* was 'edge expander' in SAS-1.1 */ "expander device (fanout)", /* marked as obsolete in SAS-2.0 */ "reserved [4]", "reserved [5]", "reserved [6]", "reserved [7]", }; static char * smp_short_attached_device_type[] = { "", /* was "no " */ "", /* was "end" */ "exp", "fex", /* obsolete in sas2r05a */ "res", "res", "res", "res", }; static char * smp_get_plink_rate(int val, int prog, int b_len, char * b) { switch (val) { case 0: snprintf(b, b_len, "not programmable"); break; case 8: snprintf(b, b_len, "1.5 Gbps"); break; case 9: snprintf(b, b_len, "3 Gbps"); break; case 0xa: snprintf(b, b_len, "6 Gbps"); break; case 0xb: snprintf(b, b_len, "12 Gbps"); break; default: if (prog && (0 == val)) snprintf(b, b_len, "not programmable"); else snprintf(b, b_len, "reserved [%d]", val); break; } return b; } static char * smp_get_reason(int val, int b_len, char * b) { switch (val) { case 0: snprintf(b, b_len, "unknown"); break; case 1: snprintf(b, b_len, "power on"); break; case 2: snprintf(b, b_len, "hard reset"); break; case 3: snprintf(b, b_len, "SMP phy control requested"); break; case 4: snprintf(b, b_len, "loss of dword synchronization"); break; case 5: snprintf(b, b_len, "error in multiplexing (MUX) sequence"); break; case 6: snprintf(b, b_len, "I_T nexus loss timeout STP/SATA"); break; case 7: snprintf(b, b_len, "break timeout timer expired"); break; case 8: snprintf(b, b_len, "phy test function stopped"); break; case 9: snprintf(b, b_len, "expander reduced functionality"); break; default: snprintf(b, b_len, "reserved [%d]", val); break; } return b; } static char * smp_get_neg_xxx_link_rate(int val, int b_len, char * b) { switch (val) { case 0: snprintf(b, b_len, "phy enabled; unknown"); break; case 1: snprintf(b, b_len, "phy disabled"); break; case 2: snprintf(b, b_len, "phy enabled; speed negotiation failed"); break; case 3: snprintf(b, b_len, "phy enabled; SATA spinup hold state"); break; case 4: snprintf(b, b_len, "phy enabled; port selector"); break; case 5: snprintf(b, b_len, "phy enabled; reset in progress"); break; case 6: snprintf(b, b_len, "phy enabled; unsupported phy attached"); break; case 8: snprintf(b, b_len, "phy enabled, 1.5 Gbps"); break; case 9: snprintf(b, b_len, "phy enabled, 3 Gbps"); break; case 0xa: snprintf(b, b_len, "phy enabled, 6 Gbps"); break; case 0xb: snprintf(b, b_len, "phy enabled, 12 Gbps"); break; default: snprintf(b, b_len, "reserved [%d]", val); break; } return b; } static char * find_sas_connector_type(int conn_type, char * buff, int buff_len) { switch (conn_type) { case 0x0: snprintf(buff, buff_len, "No information"); break; case 0x1: snprintf(buff, buff_len, "SAS 4x receptacle (SFF-8470) " "[max 4 phys]"); break; case 0x2: snprintf(buff, buff_len, "Mini SAS 4x receptacle (SFF-8088) " "[max 4 phys]"); break; case 0xf: snprintf(buff, buff_len, "Vendor specific external connector"); break; case 0x10: snprintf(buff, buff_len, "SAS 4i plug (SFF-8484) [max 4 phys]"); break; case 0x11: snprintf(buff, buff_len, "Mini SAS 4i receptacle (SFF-8087) " "[max 4 phys]"); break; case 0x20: snprintf(buff, buff_len, "SAS Drive backplane receptacle (SFF-8482) " "[max 2 phys]"); break; case 0x21: snprintf(buff, buff_len, "SATA host plug [max 1 phy]"); break; case 0x22: snprintf(buff, buff_len, "SAS Drive plug (SFF-8482) [max 2 phys]"); break; case 0x23: snprintf(buff, buff_len, "SATA device plug [max 1 phy]"); break; case 0x2f: snprintf(buff, buff_len, "SAS virtual connector [max 1 phy]"); break; case 0x3f: snprintf(buff, buff_len, "Vendor specific internal connector"); break; default: if (conn_type < 0x10) snprintf(buff, buff_len, "unknown external connector type: 0x%x", conn_type); else if (conn_type < 0x20) snprintf(buff, buff_len, "unknown internal wide connector type: " "0x%x", conn_type); else if (conn_type < 0x30) snprintf(buff, buff_len, "unknown internal connector to end " "device, type: 0x%x", conn_type); else if (conn_type < 0x70) snprintf(buff, buff_len, "reserved connector type: 0x%x", conn_type); else if (conn_type < 0x80) snprintf(buff, buff_len, "vendor specific connector type: 0x%x", conn_type); else /* conn_type is a 7 bit field, so this is impossible */ snprintf(buff, buff_len, "unexpected connector type: 0x%x", conn_type); break; } return buff; } /* Returns length of response in bytes, excluding the CRC on success, -3 (or less) -> SMP_LIB errors negated ('-4 - smp_err), -1 for other errors */ static int do_discover(struct smp_target_obj * top, int disc_phy_id, unsigned char * resp, int max_resp_len, int silence_err_report, const struct opts_t * optsp) { unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_DISCOVER, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; struct smp_req_resp smp_rr; char b[256]; char * cp; int len, res, k, act_resplen; memset(resp, 0, max_resp_len); if (! optsp->do_zero) { /* SAS-2 or later */ len = (max_resp_len - 8) / 4; smp_req[2] = (len < 0x100) ? len : 0xff; /* Allocated Response Len */ smp_req[3] = 2; /* Request Length: in dwords */ } if (optsp->ign_zp) smp_req[8] |= 0x1; smp_req[9] = disc_phy_id; if (optsp->verbose) { fprintf(stderr, " Discover request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) fprintf(stderr, "%02x ", smp_req[k]); fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = max_resp_len; smp_rr.response = resp; res = smp_send_req(top, &smp_rr, optsp->verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == optsp->verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); return -1; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); return -1; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); return -4 - SMP_LIB_CAT_MALFORMED; } len = resp[3]; if ((0 == len) && (0 == resp[2])) { len = smp_get_func_def_resp_len(resp[1]); if (len < 0) { len = 0; if (optsp->verbose > 1) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (optsp->verbose) fprintf(stderr, "actual response length [%d] less than " "deduced length [%d]\n", act_resplen, len); len = act_resplen; } if (optsp->do_hex || optsp->do_raw) { if (optsp->do_hex) dStrHex((const char *)resp, len, 1); else dStrRaw((const char *)resp, len); if (SMP_FRAME_TYPE_RESP != resp[0]) return -4 - SMP_LIB_CAT_MALFORMED; if (resp[1] != smp_req[1]) return -4 - SMP_LIB_CAT_MALFORMED; if (resp[2]) { if (optsp->verbose) fprintf(stderr, "Discover result: %s\n", smp_get_func_res_str(resp[2], sizeof(b), b)); return -4 - resp[2]; } return len; } if (SMP_FRAME_TYPE_RESP != resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", resp[0]); return -4 - SMP_LIB_CAT_MALFORMED; } if (resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], resp[1]); return -4 - SMP_LIB_CAT_MALFORMED; } if (resp[2]) { if ((optsp->verbose > 0) || (! silence_err_report)) { cp = smp_get_func_res_str(resp[2], sizeof(b), b); fprintf(stderr, "Discover result: %s\n", cp); } return -4 - resp[2]; } return len; } /* Note that the inner attributes are output in alphabetical order. */ /* N.B. This function has not been kept up to date. */ static int do_single_list(const unsigned char * rp, int len, int show_exp_cc, int do_brief) { int res, j, sas2; unsigned long long ull; sas2 = !! (rp[3]); if (sas2 && show_exp_cc && (! do_brief)) { res = (rp[4] << 8) + rp[5]; printf("expander_cc=%d\n", res); } printf("phy_id=%d\n", rp[9]); if (! do_brief) { if (sas2) printf(" att_br_cap=%d\n", !!(0x1 & rp[33])); if (len > 59) { for (ull = 0, j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= rp[52 + j]; } printf(" att_dev_name=0x%llx\n", ull); } } printf(" att_dev_type=%d\n", (0x70 & rp[12]) >> 4); if (sas2 && (! do_brief)) { printf(" att_iz_per=%d\n", !!(0x4 & rp[33])); printf(" att_pa_cap=%d\n", !!(0x8 & rp[33])); } printf(" att_phy_id=%d\n", rp[32]); if (sas2 && (! do_brief)) { printf(" att_pow_cap=%d\n", (rp[33] >> 5) & 0x3); printf(" att_reason=%d\n", (0xf & rp[12])); printf(" att_req_iz=%d\n", !!(0x2 & rp[33])); } for (ull = 0, j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= rp[24 + j]; } printf(" att_sas_addr=0x%llx\n", ull); printf(" att_sata_dev=%d\n", !! (0x1 & rp[15])); printf(" att_sata_host=%d\n", !! (0x1 & rp[14])); printf(" att_sata_ps=%d\n", !! (0x80 & rp[15])); if (sas2 && (! do_brief)) printf(" att_sl_cap=%d\n", !!(0x10 & rp[33])); printf(" att_smp_init=%d\n", !! (0x2 & rp[14])); printf(" att_smp_targ=%d\n", !! (0x2 & rp[15])); printf(" att_ssp_init=%d\n", !! (0x8 & rp[14])); printf(" att_ssp_targ=%d\n", !! (0x8 & rp[15])); printf(" att_stp_init=%d\n", !! (0x4 & rp[14])); printf(" att_stp_targ=%d\n", !! (0x4 & rp[15])); if (! do_brief) { if (sas2 || (rp[45] & 0x7f)) { printf(" conn_elem_ind=%d\n", rp[46]); printf(" conn_p_link=%d\n", rp[47]); printf(" conn_type=%d\n", (0x7f & rp[45])); } } if (! do_brief) { printf(" hw_max_p_lrate=%d\n", (0xf & rp[41])); printf(" hw_min_p_lrate=%d\n", (0xf & rp[40])); if (len > 95) printf(" hw_mux_sup=%d\n", (!! (rp[95] & 0x1))); } if (! do_brief) { printf(" iz=%d\n", !! (0x2 & rp[60])); printf(" iz_pers=%d\n", !! (0x20 & rp[60])); } printf(" neg_log_lrate=%d\n", (0xf & rp[13])); if (! do_brief) { if (len > 95) { printf(" neg_phy_lrate=%d\n", (0xf & rp[94])); printf(" opt_m_en=%d\n", (!! (rp[95] & 0x4))); } printf(" phy_cc=%d\n", rp[42]); printf(" phy_power_cond=%d\n", ((0xc0 & rp[48]) >> 6)); printf(" pp_timeout=%d\n", (0xf & rp[43])); printf(" pr_max_p_lrate=%d\n", ((0xf0 & rp[41]) >> 4)); printf(" pr_min_p_lrate=%d\n", ((0xf0 & rp[40]) >> 4)); } if ((! do_brief) && (len > 95)) printf(" reason=%d\n", (0xf0 & rp[94]) >> 4); if (! do_brief) { printf(" req_iz=%d\n", !! (0x10 & rp[60])); printf(" req_iz_cbe=%d\n", !! (0x40 & rp[60])); } printf(" routing_attr=%d\n", rp[44] & 0xf); for (ull = 0, j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= rp[16 + j]; } printf(" sas_addr=0x%llx\n", ull); if (! do_brief) { printf(" sas_pa_cap=%d\n", !!(0x4 & rp[48])); printf(" sas_pa_en=%d\n", !!(0x4 & rp[49])); printf(" sas_pow_cap=%d\n", (rp[48] >> 4) & 0x3); printf(" sas_sl_cap=%d\n", !!(0x8 & rp[48])); printf(" sas_sl_en=%d\n", !!(0x8 & rp[49])); printf(" sata_pa_cap=%d\n", !!(0x1 & rp[48])); printf(" sata_pa_en=%d\n", !!(0x1 & rp[49])); printf(" sata_sl_cap=%d\n", !!(0x2 & rp[48])); printf(" sata_sl_en=%d\n", !!(0x2 & rp[49])); printf(" stp_buff_tsmall=%d\n", !!(0x10 & rp[15])); } printf(" virt_phy=%d\n", !!(0x80 & rp[43])); if (! do_brief) { printf(" zg=%d\n", rp[63]); printf(" zg_pers=%d\n", !! (0x4 & rp[60])); printf(" zoning_en=%d\n", !! (0x1 & rp[60])); } return 0; } /* Output (multiline) for a single phy. Return 0 on success, positive error * number suitable for exit status if problems. */ static int do_single(struct smp_target_obj * top, const struct opts_t * optsp) { unsigned char rp[SMP_FN_DISCOVER_RESP_LEN]; unsigned long long ull; unsigned int ui; int res, len, j, sas2, ret; char b[256]; /* If do_discover() works, returns response length (less CRC bytes) */ len = do_discover(top, optsp->phy_id, rp, sizeof(rp), 0, optsp); if (len < 0) ret = (len < -2) ? (-4 - len) : len; else ret = 0; if (optsp->do_hex || optsp->do_raw) return ret; ull = 0; if (len > 23) { /* fetch my (expander's) SAS addrss */ for (j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= rp[16 + j]; } } if (optsp->do_my) { printf("0x%llx\n", ull); if ((ull > 0) && (SMP_FRES_PHY_VACANT == ret)) return 0; else return ret; } if (ret) { if (SMP_FRES_PHY_VACANT == ret) printf(" phy identifier: %d inaccessible (phy vacant)\n", optsp->phy_id); return ret; } if (optsp->do_list) return do_single_list(rp, len, 1, optsp->do_brief); printf("Discover response%s:\n", (optsp->do_brief ? " (brief)" : "")); sas2 = !! (rp[3]); res = (rp[4] << 8) + rp[5]; if (sas2 || (optsp->verbose > 3)) { if (optsp->verbose || (res > 0)) printf(" expander change count: %d\n", res); } printf(" phy identifier: %d\n", rp[9]); res = ((0x70 & rp[12]) >> 4); if (res < 8) printf(" attached device type: %s\n", smp_attached_device_type[res]); if ((optsp->do_brief > 1) && (0 == res)) return 0; if (sas2 || (optsp->verbose > 3)) printf(" attached reason: %s\n", smp_get_reason(0xf & rp[12], sizeof(b), b)); printf(" negotiated logical link rate: %s\n", smp_get_neg_xxx_link_rate(0xf & rp[13], sizeof(b), b)); printf(" attached initiator: ssp=%d stp=%d smp=%d sata_host=%d\n", !!(rp[14] & 8), !!(rp[14] & 4), !!(rp[14] & 2), (rp[14] & 1)); if (0 == optsp->do_brief) { printf(" attached sata port selector: %d\n", !!(rp[15] & 0x80)); printf(" STP buffer too small: %d\n", !!(rp[15] & 0x10)); } printf(" attached target: ssp=%d stp=%d smp=%d sata_device=%d\n", !!(rp[15] & 8), !!(rp[15] & 4), !!(rp[15] & 2), (rp[15] & 1)); printf(" SAS address: 0x%llx\n", ull); ull = 0; for (j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= rp[24 + j]; } printf(" attached SAS address: 0x%llx\n", ull); printf(" attached phy identifier: %d\n", rp[32]); if (0 == optsp->do_brief) { if (sas2 || (optsp->verbose > 3)) { printf(" attached power capable: %d\n", ((rp[33] >> 5) & 0x3)); printf(" attached slumber capable: %d\n", !!(rp[33] & 0x10)); printf(" attached partial capable: %d\n", !!(rp[33] & 0x8)); printf(" attached inside ZPSDS persistent: %d\n", !!(rp[33] & 4)); printf(" attached requested inside ZPSDS: %d\n", !!(rp[33] & 2)); printf(" attached break_reply capable: %d\n", !!(rp[33] & 1)); } printf(" programmed minimum physical link rate: %s\n", smp_get_plink_rate(((rp[40] >> 4) & 0xf), 1, sizeof(b), b)); printf(" hardware minimum physical link rate: %s\n", smp_get_plink_rate((rp[40] & 0xf), 0, sizeof(b), b)); printf(" programmed maximum physical link rate: %s\n", smp_get_plink_rate(((rp[41] >> 4) & 0xf), 1, sizeof(b), b)); printf(" hardware maximum physical link rate: %s\n", smp_get_plink_rate((rp[41] & 0xf), 0, sizeof(b), b)); printf(" phy change count: %d\n", rp[42]); printf(" virtual phy: %d\n", !!(rp[43] & 0x80)); printf(" partial pathway timeout value: %d us\n", (rp[43] & 0xf)); } res = (0xf & rp[44]); switch (res) { case 0: snprintf(b, sizeof(b), "direct"); break; case 1: snprintf(b, sizeof(b), "subtractive"); break; case 2: snprintf(b, sizeof(b), "table"); break; default: snprintf(b, sizeof(b), "reserved [%d]", res); break; } printf(" routing attribute: %s\n", b); if (optsp->do_brief) { if ((len > 63) && !!(rp[60] & 0x1)) printf(" zone group: %d\n", rp[63]); return 0; } if (sas2 || (rp[45] & 0x7f)) { printf(" connector type: %s\n", find_sas_connector_type((rp[45] & 0x7f), b, sizeof(b))); printf(" connector element index: %d\n", rp[46]); printf(" connector physical link: %d\n", rp[47]); printf(" phy power condition: %d\n", (rp[48] & 0xc0) >> 6); printf(" sas power capable: %d\n", (rp[48] >> 4) & 0x3); printf(" sas slumber capable: %d\n", !!(rp[48] & 0x8)); printf(" sas partial capable: %d\n", !!(rp[48] & 0x4)); printf(" sata slumber capable: %d\n", !!(rp[48] & 0x2)); printf(" sata partial capable: %d\n", !!(rp[48] & 0x1)); printf(" sas slumber enabled: %d\n", !!(rp[49] & 0x8)); printf(" sas partial enabled: %d\n", !!(rp[49] & 0x4)); printf(" sata slumber enabled: %d\n", !!(rp[49] & 0x2)); printf(" sata partial enabled: %d\n", !!(rp[49] & 0x1)); } if (len > 59) { ull = 0; for (j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= rp[52 + j]; } printf(" attached device name: 0x%llx\n", ull); printf(" requested inside ZPSDS changed by expander: %d\n", !!(rp[60] & 0x40)); printf(" inside ZPSDS persistent: %d\n", !!(rp[60] & 0x20)); printf(" requested inside ZPSDS: %d\n", !!(rp[60] & 0x10)); /* printf(" zone address resolved: %d\n", !!(rp[60] & 0x8)); */ printf(" zone group persistent: %d\n", !!(rp[60] & 0x4)); printf(" inside ZPSDS: %d\n", !!(rp[60] & 0x2)); printf(" zoning enabled: %d\n", !!(rp[60] & 0x1)); printf(" zone group: %d\n", rp[63]); if (len < 76) return 0; printf(" self-configuration status: %d\n", rp[64]); printf(" self-configuration levels completed: %d\n", rp[65]); ull = 0; for (j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= rp[68 + j]; } printf(" self-configuration sas address: 0x%llx\n", ull); ui = 0; for (j = 0; j < 4; ++j) { if (j > 0) ui <<= 8; ui |= rp[76 + j]; } printf(" programmed phy capabilities: 0x%x\n", ui); ui = 0; for (j = 0; j < 4; ++j) { if (j > 0) ui <<= 8; ui |= rp[80 + j]; } printf(" current phy capabilities: 0x%x\n", ui); ui = 0; for (j = 0; j < 4; ++j) { if (j > 0) ui <<= 8; ui |= rp[84 + j]; } printf(" attached phy capabilities: 0x%x\n", ui); } if (len > 95) { printf(" reason: %s\n", smp_get_reason((0xf0 & rp[94]) >> 4, sizeof(b), b)); printf(" negotiated physical link rate: %s\n", smp_get_neg_xxx_link_rate(0xf & rp[94], sizeof(b), b)); printf(" optical mode enabled: %d\n", !!(rp[95] & 0x4)); printf(" negotiated SSC: %d\n", !!(rp[95] & 0x2)); printf(" hardware muxing supported: %d\n", !!(rp[95] & 0x1)); } if (len > 107) { printf(" default inside ZPSDS persistent: %d\n", !!(rp[96] & 0x20)); printf(" default requested inside ZPSDS: %d\n", !!(rp[96] & 0x10)); printf(" default zone group persistent: %d\n", !!(rp[96] & 0x4)); printf(" default zoning enabled: %d\n", !!(rp[96] & 0x1)); printf(" default zone group: %d\n", rp[99]); printf(" saved inside ZPSDS persistent: %d\n", !!(rp[100] & 0x20)); printf(" saved requested inside ZPSDS: %d\n", !!(rp[100] & 0x10)); printf(" saved zone group persistent: %d\n", !!(rp[100] & 0x4)); printf(" saved zoning enabled: %d\n", !!(rp[100] & 0x1)); printf(" saved zone group: %d\n", rp[103]); printf(" shadow inside ZPSDS persistent: %d\n", !!(rp[104] & 0x20)); printf(" shadow requested inside ZPSDS: %d\n", !!(rp[104] & 0x10)); printf(" shadow zone group persistent: %d\n", !!(rp[104] & 0x4)); /* 'shadow zoning enabled' added in spl2r03 */ printf(" shadow zoning enabled: %d\n", !!(rp[104] & 0x1)); printf(" shadow zone group: %d\n", rp[107]); } if (len > 115) { printf(" device slot number: %d\n", rp[108]); printf(" device slot group number: %d\n", rp[109]); printf(" device slot group output connector: %.6s\n", rp + 110); } if (len > 117) printf(" STP buffer size: %d\n", (rp[116] << 8) + rp[117]); return 0; } #define MAX_PHY_ID 254 /* Calls do_discover() multiple times. Summarizes info into one * line per phy. Returns 0 if ok, else function result. */ static int do_multiple(struct smp_target_obj * top, const struct opts_t * optsp) { unsigned char rp[SMP_FN_DISCOVER_RESP_LEN]; unsigned long long ull, adn; unsigned long long expander_sa; int ret, len, k, j, num, off, plus, negot, adt, zg; char b[256]; int first = 1; const char * cp; expander_sa = 0; num = optsp->do_num ? (optsp->phy_id + optsp->do_num) : MAX_PHY_ID; for (k = optsp->phy_id; k < num; ++k) { len = do_discover(top, k, rp, sizeof(rp), 1, optsp); if (len < 0) ret = (len < -2) ? (-4 - len) : len; else ret = 0; if (SMP_FRES_NO_PHY == ret) return 0; /* expected, end condition */ else if (SMP_FRES_PHY_VACANT == ret) { printf(" phy %3d: inaccessible (phy vacant)\n", k); continue; } else if (ret) return ret; ull = 0; for (j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= rp[16 + j]; } if (0 == expander_sa) expander_sa = ull; else { if (ull != expander_sa) { if (ull > 0) { fprintf(stderr, ">> expander's SAS address is changing?? " "phy_id=%d, was=%llxh, now=%llxh\n", rp[9], expander_sa, ull); expander_sa = ull; } else if (optsp->verbose) fprintf(stderr, ">> expander's SAS address shown as 0 at " "phy_id=%d\n", rp[9]); } } if (first && (! optsp->do_raw)) { first = 0; if (optsp->sa_given && (optsp->sa != expander_sa)) printf(" <<< Warning: reported expander address is not the " "one requested >>>\n"); #if 0 /* for compatibility with smp_discover_list which does not * know its own SAS address with short descriptors */ printf("Device <%016llx>, expander:\n", expander_sa); #endif } if (optsp->do_hex || optsp->do_raw) continue; if (optsp->do_list) { do_single_list(rp, len, 0, optsp->do_brief); continue; } adt = ((0x70 & rp[12]) >> 4); if ((optsp->do_brief > 1) && (0 == adt)) continue; negot = rp[13] & 0xf; switch(rp[44] & 0xf) { case 0: cp = "D"; break; case 1: cp = "S"; break; case 2: cp = "T"; break; default: cp = "R"; break; } if (1 == negot) { printf(" phy %3d:%s:disabled\n", rp[9], cp); continue; } else if (2 == negot) { printf(" phy %3d:%s:reset problem\n", rp[9], cp); continue; } else if (3 == negot) { printf(" phy %3d:%s:spinup hold\n", rp[9], cp); continue; } else if (4 == negot) { printf(" phy %3d:%s:port selector\n", rp[9], cp); continue; } else if (5 == negot) { printf(" phy %3d:%s:reset in progress\n", rp[9], cp); continue; } else if (6 == negot) { printf(" phy %3d:%s:unsupported phy attached\n", rp[9], cp); continue; } if ((optsp->do_brief > 0) && (0 == adt)) continue; if (k != rp[9]) fprintf(stderr, ">> requested phy_id=%d differs from response " "phy=%d\n", k, rp[9]); ull = 0; for (j = 0; j < 8; ++j) { if (j > 0) ull <<= 8; ull |= rp[24 + j]; } if ((0 == adt) || (adt > 3)) { printf(" phy %3d:%s:attached:[0000000000000000:00]", k, cp); if ((optsp->do_brief > 1) || optsp->do_adn || (len < 64)) { printf("\n"); continue; } zg = rp[63]; /* (zoning enabled or a zone group > 0) and a zg other than 1 */ if (((rp[60] & 0x1) || zg) && (1 != zg)) printf(" ZG:%d\n", zg); else printf("\n"); continue; } if (optsp->do_adn && (len > 59)) { adn = 0; for (j = 0; j < 8; ++j) { if (j > 0) adn <<= 8; adn |= rp[52 + j]; } printf(" phy %3d:%s:attached:[%016llx:%02d %016llx %s%s", k, cp, ull, rp[32], adn, smp_short_attached_device_type[adt], ((rp[43] & 0x80) ? " V" : "")); } else printf(" phy %3d:%s:attached:[%016llx:%02d %s%s", k, cp, ull, rp[32], smp_short_attached_device_type[adt], ((rp[43] & 0x80) ? " V" : "")); if (rp[14] & 0xf) { off = 0; plus = 0; off += snprintf(b + off, sizeof(b) - off, " i("); if (rp[14] & 0x8) { off += snprintf(b + off, sizeof(b) - off, "SSP"); ++plus; } if (rp[14] & 0x4) { off += snprintf(b + off, sizeof(b) - off, "%sSTP", (plus ? "+" : "")); ++plus; } if (rp[14] & 0x2) { off += snprintf(b + off, sizeof(b) - off, "%sSMP", (plus ? "+" : "")); ++plus; } if (rp[14] & 0x1) { off += snprintf(b + off, sizeof(b) - off, "%sSATA", (plus ? "+" : "")); ++plus; } printf("%s)", b); } if (rp[15] & 0xf) { off = 0; plus = 0; off += snprintf(b + off, sizeof(b) - off, " t("); if (rp[15] & 0x80) { off += snprintf(b + off, sizeof(b) - off, "PORT_SEL"); ++plus; } if (rp[15] & 0x8) { off += snprintf(b + off, sizeof(b) - off, "%sSSP", (plus ? "+" : "")); ++plus; } if (rp[15] & 0x4) { off += snprintf(b + off, sizeof(b) - off, "%sSTP", (plus ? "+" : "")); ++plus; } if (rp[15] & 0x2) { off += snprintf(b + off, sizeof(b) - off, "%sSMP", (plus ? "+" : "")); ++plus; } if (rp[15] & 0x1) { off += snprintf(b + off, sizeof(b) - off, "%sSATA", (plus ? "+" : "")); ++plus; } printf("%s)", b); } if ((optsp->do_brief > 1) || optsp->do_adn) { printf("]\n"); continue; } else printf("]"); switch(negot) { case 8: cp = " 1.5 Gbps"; break; case 9: cp = " 3 Gbps"; break; case 0xa: cp = " 6 Gbps"; break; case 0xb: cp = " 12 Gbps"; break; default: cp = ""; break; } printf("%s", cp); if (len > 63) { zg = rp[63]; if (((rp[60] & 0x1) || zg) && (1 != zg)) printf(" ZG:%d\n", zg); else printf("\n"); } else printf("\n"); } return 0; } int main(int argc, char * argv[]) { int res, c; long long sa_ll; char i_params[256]; char device_name[512]; struct smp_target_obj tobj; int subvalue = 0; char * cp; int ret = 0; struct opts_t opts; memset(&opts, 0, sizeof(opts)); memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "AbhHiI:lmMn:p:rs:SvVz", long_options, &option_index); if (c == -1) break; switch (c) { case 'A': ++opts.do_adn; break; case 'b': ++opts.do_brief; break; case 'h': case '?': usage(); return 0; case 'H': ++opts.do_hex; break; case 'i': ++opts.ign_zp; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'l': ++opts.do_list; break; case 'm': ++opts.multiple; break; case 'M': ++opts.do_my; break; case 'n': opts.do_num = smp_get_num(optarg); if (opts.do_num < 0) { fprintf(stderr, "bad argument to '--num'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'p': opts.phy_id = smp_get_num(optarg); if ((opts.phy_id < 0) || (opts.phy_id > 254)) { fprintf(stderr, "bad argument to '--phy', expect " "value from 0 to 254\n"); return SMP_LIB_SYNTAX_ERROR; } ++opts.phy_id_given; break; case 'r': ++opts.do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } opts.sa = (unsigned long long)sa_ll; if (opts.sa > 0) ++opts.sa_given; break; case 'v': ++opts.verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; case 'S': ++opts.do_summary; break; case 'z': ++opts.do_zero; break; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == opts.sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } opts.sa = (unsigned long long)sa_ll; } } if (opts.sa > 0) { if (! smp_is_naa5(opts.sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } if (opts.do_my) { opts.multiple = 0; opts.do_summary = 0; opts.do_num = 1; } else if ((0 == opts.do_summary) && (0 == opts.multiple) && (0 == opts.do_num) && (0 == opts.phy_id_given)) ++opts.do_summary; if (opts.do_summary) { ++opts.do_brief; opts.multiple = 1; } res = smp_initiator_open(device_name, subvalue, i_params, opts.sa, &tobj, opts.verbose); if (res < 0) return SMP_LIB_FILE_ERROR; if (opts.multiple) ret = do_multiple(&tobj, &opts); else ret = do_single(&tobj, &opts); res = smp_initiator_close(&tobj); if (res < 0) { if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (opts.verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_rep_phy_event_list.c0000664000175000017500000004642611675012613020220 0ustar douggdougg/* * Copyright (c) 2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a REPORT PHY EVENT LIST function and outputs its * response. */ static char * version_str = "1.07 20111222"; #define SMP_FN_REPORT_PHY_EVENT_LIST_RESP_LEN (1020 + 4 + 4) #define DEF_STARTING_INDEX 1 struct pes_name_t { int pes; /* phy event source, an 8 bit number */ const char * pes_name; }; static struct option long_options[] = { {"desc", 0, 0, 'd'}, {"enumerate", 0, 0, 'e'}, {"force", 0, 0, 'f'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"index", 1, 0, 'i'}, {"interface", 1, 0, 'I'}, {"long", 0, 0, 'l'}, {"nonz", 0, 0, 'n'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static struct pes_name_t pes_name_arr[] = { {0x0, "No event"}, /* Phy layer-based phy events (0x1 to 0x1F) */ {0x1, "Invalid word count"}, {0x2, "Running disparity error count"}, {0x3, "Loss of dword synchronization count"}, {0x4, "Phy reset problem count"}, {0x5, "Elasticity buffer overflow count"}, {0x6, "Received ERROR count"}, /* SAS arbitration-based phy events (0x20 to 0x3F) */ {0x20, "Received address frame error count"}, {0x21, "Transmitted abandon-class OPEN_REJECT count"}, {0x22, "Received abandon-class OPEN_REJECT count"}, {0x23, "Transmitted retry-class OPEN_REJECT count"}, {0x24, "Received retry-class OPEN_REJECT count"}, {0x25, "Received AIP (WATING ON PARTIAL) count"}, {0x26, "Received AIP (WAITING ON CONNECTION) count"}, {0x27, "Transmitted BREAK count"}, {0x28, "Received BREAK count"}, {0x29, "Break timeout count"}, {0x2a, "Connection count"}, {0x2b, "Peak transmitted pathway blocked count"}, /*PVD */ {0x2c, "Peak transmitted arbitration wait time"}, /*PVD */ {0x2d, "Peak arbitration time"}, /*PVD */ {0x2e, "Peak connection time"}, /*PVD */ /* SSP related phy events (0x40 to 0x4F) */ {0x40, "Transmitted SSP frame count"}, {0x41, "Received SSP frame count"}, {0x42, "Transmitted SSP frame error count"}, {0x43, "Received SSP frame error count"}, {0x44, "Transmitted CREDIT_BLOCKED count"}, {0x45, "Received CREDIT_BLOCKED count"}, /* SATA related phy events (0x50 to 0x5F) */ {0x50, "Transmitted SATA frame count"}, {0x51, "Received SATA frame count"}, {0x52, "SATA flow control buffer overflow count"}, /* SMP related phy events (0x60 to 0x6F) */ {0x60, "Transmitted SMP frame count"}, {0x61, "Received SMP frame count"}, {0x63, "Received SMP frame error count"}, /* Reserved 0x70 to 0xCF) */ /* Vendor specific 0xD0 to 0xFF) */ {-1, NULL} }; static void usage(void) { fprintf(stderr, "Usage: " "smp_rep_phy_event_list [--desc] [--enumerate] [--force] " "[--help]\n" " [--hex] [--index=IN] " "[--interface=PARAMS]\n" " [--long] [--raw] [--sa=SAS_ADDR] " "[--verbose]\n" " [--version] SMP_DEVICE[,N]\n" " where:\n" " --desc|-d show descriptor number in output\n" " --enumerate|-e enumerate phy event source names, " "ignore\n" " SMP_DEVICE if given\n" " --force|-f force to continue past last descriptor " "index\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --index=IN|-i IN starting phy event list descriptor " "index (def: 1)\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --long|-l show phy event source hex value in " "output\n" " --nonz|-n only show phy events with non-zero " "counts\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP REPORT PHY EVENT LIST function\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } static const char * get_pes_name(int pes, char * b, int blen) { int len; const char * res = NULL; const struct pes_name_t * pnp; if ((NULL == b) || (blen < 1)) return res; for (pnp = pes_name_arr; pnp->pes_name; ++pnp) { if (pes == pnp->pes) { len = strlen(pnp->pes_name); if (len > (blen - 1)) len = blen - 1; memcpy(b, pnp->pes_name, len); b[len] = '\0'; return b; } } return res; } /* from sas2r15 */ static void show_phy_event_info(int phy_id, int prev_pid, int pes, unsigned int val, unsigned int thresh_val, int do_long) { unsigned int u; char b[80]; const char * cp; if (do_long) printf(" phy_id=%d: [0x%x] ", phy_id, (unsigned int)pes); else { snprintf(b, sizeof(b) - 1, " %d: ", phy_id); b[sizeof(b) - 1] = '\0'; if (prev_pid == phy_id) memset(b, ' ', strlen(b)); printf("%s", b); } switch (pes) { case 0: printf("No event\n"); break; case 0x1: case 0x2: case 0x3: case 0x4: case 0x5: case 0x6: case 0x20: case 0x21: case 0x22: case 0x23: case 0x24: case 0x25: case 0x26: case 0x27: case 0x28: case 0x29: case 0x2a: case 0x40: case 0x41: case 0x42: case 0x43: case 0x44: case 0x45: case 0x50: case 0x51: case 0x52: case 0x60: case 0x61: case 0x63: if ((cp = get_pes_name(pes, b, sizeof(b)))) printf("%s: %u\n", cp, val); else printf("Unknown Phy Event Source [0x%x]: %u\n", pes, val); break; case 0x2b: printf("%s: %u\n", get_pes_name(pes, b, sizeof(b)), val & 0xff); printf(" Peak value detector threshold: %u\n", thresh_val & 0xff); break; case 0x2c: cp = get_pes_name(pes, b, sizeof(b)); u = val & 0xffff; if (u < 0x8000) printf("%s (us): %u\n", cp, u); else printf("%s (ms): %u\n", cp, 33 + (u - 0x8000)); u = thresh_val & 0xffff; if (u < 0x8000) printf(" Peak value detector threshold (us): %u\n", u); else printf(" Peak value detector threshold (ms): %u\n", 33 + (u - 0x8000)); break; case 0x2d: printf("%s (us): %u\n", get_pes_name(pes, b, sizeof(b)), val); printf(" Peak value detector threshold: %u\n", thresh_val); break; case 0x2e: printf("%s (us): %u\n", get_pes_name(pes, b, sizeof(b)), val); printf(" Peak value detector threshold: %u\n", thresh_val); break; default: printf("Unknown phy event source: %d, val=%u, thresh_val=%u\n", pes, val, thresh_val); break; } } int main(int argc, char * argv[]) { int res, c, k, len, ped_len, num_ped, pes, phy_id, prev_pid, act_resplen; int do_desc = 0; int do_enumerate = 0; int do_force = 0; int do_hex = 0; int do_long = 0; int do_nonz = 0; int starting_index = DEF_STARTING_INDEX; int do_raw = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[] = {SMP_FRAME_TYPE_REQ, SMP_FN_REPORT_PHY_EVENT_LIST, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0}; unsigned char smp_resp[SMP_FN_REPORT_PHY_EVENT_LIST_RESP_LEN]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; const struct pes_name_t * pnp; int subvalue = 0; unsigned int first_di, last_di, pe_val, pvdt; char * cp; unsigned char * pedp; int ret = 0; memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "defhHi:I:lnrs:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'd': ++do_desc; break; case 'e': ++do_enumerate; break; case 'f': ++do_force; break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'i': starting_index = smp_get_num(optarg); if ((starting_index < 0) || (starting_index > 65535)) { fprintf(stderr, "bad argument to '--index'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'l': ++do_long; break; case 'n': ++do_nonz; break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (do_enumerate) { printf("Phy Event Source names (preceded by hex value):\n"); for (pnp = pes_name_arr; pnp->pes_name; ++pnp) printf(" [0x%02x] %s\n", pnp->pes, pnp->pes_name); return 0; } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; len = (sizeof(smp_resp) - 8) / 4; smp_req[2] = (len < 0x100) ? len : 0xff; /* Allocated Response Len */ smp_req[6] = ((starting_index) >> 8) & 0xff; smp_req[7] = starting_index & 0xff; if (verbose) { fprintf(stderr, " Report phy event list request: "); for (k = 0; k < (int)sizeof(smp_req); ++k) fprintf(stderr, "%02x ", smp_req[k]); fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; if (smp_resp[2]) { ret = smp_resp[2]; if (verbose) fprintf(stderr, "Report phy event list result: %s\n", smp_get_func_res_str(ret, sizeof(b), b)); } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Report phy event list result: %s\n", cp); ret = smp_resp[2]; goto err_out; } printf("Report phy event list response:\n"); res = (smp_resp[4] << 8) + smp_resp[5]; if (verbose || res) printf(" Expander change count: %d\n", res); first_di = (smp_resp[6] << 8) | smp_resp[7]; last_di = (smp_resp[8] << 8) | smp_resp[9]; printf(" first phy event list descriptor index: %u\n", first_di); printf(" last phy event list descriptor index: %u\n", last_di); printf(" phy event descriptor length: %d dwords\n", smp_resp[10]); ped_len = smp_resp[10] * 4; num_ped = smp_resp[15]; printf(" number of phy event descriptors: %d\n", num_ped); if (ped_len < 12) { fprintf(stderr, "Unexpectedly low descriptor length: %d bytes\n", ped_len); ret = -1; goto err_out; } pedp = smp_resp + 16; for (k = 0, prev_pid = -1; k < num_ped; ++k, pedp += ped_len, prev_pid = phy_id) { if ((0 == do_force) && ((first_di + k) > last_di)) { if (do_long) printf("last descriptor index exceeded, exiting\n"); break; } phy_id = pedp[2]; pes = pedp[3]; pe_val = (pedp[4] << 24) | (pedp[5] << 16) | (pedp[6] << 8) | pedp[7]; pvdt = (pedp[8] << 24) | (pedp[9] << 16) | (pedp[10] << 8) | pedp[11]; if ((0 == do_nonz) || pe_val) { if (do_desc) printf(" Descriptor index %u:\n", first_di + k); show_phy_event_info(phy_id, prev_pid, pes, pe_val, pvdt, do_long); } } if ((k >= num_ped) && ((first_di + k) < last_di)) printf("Start next invocation at '--index=%u'\n", first_di + k); err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_conf_zone_man_pass.c0000664000175000017500000004773311675012613020161 0ustar douggdougg/* * Copyright (c) 2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a CONFIGURE ZONE MANAGER PASSWORD function and * outputs its response. */ static char * version_str = "1.02 20111222"; static struct option long_options[] = { {"expected", 1, 0, 'E'}, {"fpass", 1, 0, 'F'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"new-fpass", 1, 0, 'N'}, {"new-pass", 1, 0, 'n'}, {"password", 1, 0, 'P'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"save", 1, 0, 'S'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_conf_zone_man_pass [--expected=EX] [--fpass=FP] [--help] " "[--hex]\n" " [--interface=PARAMS] " "[--new-fpass=NF]\n" " [--new-pass=NP] [--password=PA] " "[--raw]\n" " [--sa=SAS_ADDR] [--save=SAV] " "[--verbose]\n" " [--version] SMP_DEVICE[,N]\n" " where:\n" " --expected=EX|-E EX set expected expander change " "count to EX\n" " --fpass=FP|-F FP file FP contains password, in hex or " "ASCII\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --new-fpass=NF|-N NF file NF contains new password, in " "hex or\n" " ASCII\n" " --new-pass=NP|-n NP new password NP in ASCII, padded with " "NULLs to\n" " be 32 bytes long (def: all NULLs)\n" " --password=PA|-P PA password PA in ASCII, padded with " "NULLs to\n" " be 32 bytes long (def: all NULLs)\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n" " --save=SAV|-S SAV SAV: 0 -> shadow (def); 1 -> " "saved\n" " 2 -> shadow (and saved if " "supported))\n" " 3 -> shadow and saved\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP CONFIGURE ZONE MANAGER PASSWORD function\n" ); } /* Read ASCII hex bytes from fname (a file named '-' taken as stdin). * There should be either one entry per line or a comma, space or tab * separated list of bytes. The first ASCII hex string detected has its * length checked; if the length is 1 or 2 then bytes are expected to * be space, comma or tab separated; if the length is 3 or more then a * string of ACSII hex digits is expected, 2 per byte. Everything from * and including a '#' on a line is ignored. If the first non-space * character on a line is quote or double quote then the ASCII string * up to the next quote or double quote on that line is translated to * binary (with each ASCII character translated to the binary byte * equivalent). Only the first such quoted ASCII string is translated. * If '-1' is detected at the start of a line then the rest of the * map_arr is filled with bytes of 0xff. Returns 0 if ok, or 1 if error. */ static int f2hex_arr(const char * fname, unsigned char * mp_arr, int * mp_arr_len, int max_arr_len) { int fn_len, in_len, k, j, m; int no_space = 0; int checked_hexlen = 0; unsigned int h; const char * lcp; char * cp; FILE * fp; char line[512]; int off = 0; if ((NULL == fname) || (NULL == mp_arr) || (NULL == mp_arr_len)) return 1; fn_len = strlen(fname); if (0 == fn_len) return 1; if ((1 == fn_len) && ('-' == fname[0])) /* read from stdin */ fp = stdin; else { fp = fopen(fname, "r"); if (NULL == fp) { fprintf(stderr, "Unable to open %s for reading\n", fname); return 1; } } for (j = 0; j < 512; ++j) { if (NULL == fgets(line, sizeof(line), fp)) break; in_len = strlen(line); if (in_len > 0) { if ('\n' == line[in_len - 1]) { --in_len; line[in_len] = '\0'; } } if (0 == in_len) continue; lcp = line; m = strspn(lcp, " \t"); if (m == in_len) continue; lcp += m; in_len -= m; if ('#' == *lcp) continue; if (('\'' == *lcp) || ('"' == *lcp)) goto astring; if (('-' == *lcp) && ('1' == *(lcp + 1))) goto minus1; if (! checked_hexlen) { ++checked_hexlen; k = strspn(lcp, "0123456789aAbBcCdDeEfF"); if (k > 2) no_space = 1; } k = strspn(lcp, "0123456789aAbBcCdDeEfF ,\t"); if ((k < in_len) && ('#' != lcp[k])) { fprintf(stderr, "f2hex_arr: syntax error at " "line %d, pos %d\n", j + 1, m + k + 1); goto bad; } if (no_space) { for (k = 0; isxdigit(*lcp) && isxdigit(*(lcp + 1)); ++k, lcp += 2) { if (1 != sscanf(lcp, "%2x", &h)) { fprintf(stderr, "f2hex_arr: bad hex number in line " "%d, pos %d\n", j + 1, (int)(lcp - line + 1)); goto bad; } if ((off + k) >= max_arr_len) { fprintf(stderr, "f2hex_arr: array length exceeded\n"); goto bad; } mp_arr[off + k] = h; } off += k; } else { for (k = 0; k < 1024; ++k) { if (1 == sscanf(lcp, "%x", &h)) { if (h > 0xff) { fprintf(stderr, "f2hex_arr: hex number " "larger than 0xff in line %d, pos %d\n", j + 1, (int)(lcp - line + 1)); goto bad; } if ((off + k) >= max_arr_len) { fprintf(stderr, "f2hex_arr: array length " "exceeded\n"); goto bad; } mp_arr[off + k] = h; lcp = strpbrk(lcp, " ,\t"); if (NULL == lcp) break; lcp += strspn(lcp, " ,\t"); if ('\0' == *lcp) break; } else { if ('#' == *lcp) { --k; break; } fprintf(stderr, "f2hex_arr: error in " "line %d, at pos %d\n", j + 1, (int)(lcp - line + 1)); goto bad; } } off += (k + 1); } } *mp_arr_len = off; fclose(fp); return 0; astring: cp = strchr(lcp + 1, *lcp); if (NULL == cp) { fprintf(stderr, "f2hex_arr: unterminated ASCII string on line " "%d, starts: %s\n", j + 1, lcp); goto bad; } k = (cp - lcp) - 1; if (k > 0) { if ((off + k) > max_arr_len) { fprintf(stderr, "f2hex_arr: array length exceeded\n"); goto bad; } memcpy(mp_arr + off, lcp + 1, k); } off += k; *mp_arr_len = off; fclose(fp); return 0; minus1: for (k = off; k < max_arr_len; ++k) mp_arr[k] = 0xff; *mp_arr_len = k; fclose(fp); return 0; bad: fclose(fp); return 1; } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, len, act_resplen; int expected_cc = 0; const char * fpass = NULL; const char * nfpass = NULL; int do_hex = 0; int do_save = 0; unsigned char password[32]; unsigned char npassword[32]; int do_raw = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[] = { SMP_FRAME_TYPE_REQ, SMP_FN_CONFIG_ZONE_MANAGER_PASS, 0, 0x11, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, }; unsigned char smp_resp[8]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; int subvalue = 0; char * cp; int ret = 0; memset(password, 0, sizeof password); memset(npassword, 0, sizeof npassword); memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "E:F:hHI:n:N:P:rs:S:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'E': expected_cc = smp_get_num(optarg); if ((expected_cc < 0) || (expected_cc > 65535)) { fprintf(stderr, "bad argument to '--expected'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'F': fpass = optarg; break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'n': len = (int)strlen(optarg); if (len > 32) { fprintf(stderr, "argument to '--new-pass' too long; " "max 32 got %d\n", len); return SMP_LIB_SYNTAX_ERROR; } memcpy(npassword , optarg, len); break; case 'N': nfpass = optarg; break; case 'P': len = (int)strlen(optarg); if (len > 32) { fprintf(stderr, "argument to '--password' too long; " "max 32 got %d\n", len); return SMP_LIB_SYNTAX_ERROR; } memcpy(password , optarg, len); break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'S': do_save = smp_get_num(optarg); if ((do_save < 0) || (do_save > 3)) { fprintf(stderr, "bad argument to '--save'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } if (fpass) { if (password[0]) { fprintf(stderr, "can't have both --fpass and --password " "options\n"); return SMP_LIB_SYNTAX_ERROR; } if (f2hex_arr(fpass, password, &len, sizeof(password))) { fprintf(stderr, "failed decoding --fpass=FP option\n"); return SMP_LIB_SYNTAX_ERROR; } } if (nfpass) { if (npassword[0]) { fprintf(stderr, "can't have both --new-pass and --new-fpass " "options\n"); return SMP_LIB_SYNTAX_ERROR; } if (f2hex_arr(nfpass, npassword, &len, sizeof(npassword))) { fprintf(stderr, "failed decoding --new-fpass=FP option\n"); return SMP_LIB_SYNTAX_ERROR; } } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; smp_req[4] = (expected_cc >> 8) & 0xff; smp_req[5] = expected_cc & 0xff; smp_req[6] = do_save & 0x3; memcpy(smp_req + 8, password, 32); memcpy(smp_req + 40, npassword, 32); if (verbose) { fprintf(stderr, " Configure zone manager password request:"); for (k = 0; k < (int)sizeof(smp_req); ++k) { if (0 == (k % 16)) fprintf(stderr, "\n "); else if (0 == (k % 8)) fprintf(stderr, " "); fprintf(stderr, "%02x ", smp_req[k]); } fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = sizeof(smp_req); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[2]) { if (verbose) fprintf(stderr, "Configure zone manager password result: " "%s\n", smp_get_func_res_str(smp_resp[2], sizeof(b), b)); ret = smp_resp[2]; } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Configure zone manager password result: %s\n", cp); ret = smp_resp[2]; goto err_out; } err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_write_gpio.c0000664000175000017500000004164111675012613016460 0ustar douggdougg/* * Copyright (c) 2006-2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a WRITE GPIO REGISTER request and outputs its * response. The WRITE GPIO REGISTER function is defined in SFF-8485 * 0.7 [2006/02/01]. * * Based on a comment by Rob Elliott in this t10 document : 08-212r8.pdf * (page 871 or 552) the ENHANCED variant request has its 4-byte header * changed to comply with other SAS-2 SMP requests. This will increase * the byte position by 2 of the register type, index and count fields. * The remaining write data (first..last register) is not moved. */ static char * version_str = "1.09 20111222"; #define SMP_MAX_REQ_LEN (1020 + 4 + 4) static struct option long_options[] = { {"count", 1, 0, 'c'}, {"data", 1, 0, 'd'}, {"enhanced", 0, 0, 'E'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"index", 1, 0, 'i'}, {"interface", 1, 0, 'I'}, {"phy", 1, 0, 'p'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"type", 0, 0, 't'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_write_gpio [--count=CO] [--data=H,H...] [--enhanced] " "[--help]\n" " [--hex] [--index=IN] [--interface=PARAMS] " "[--raw]\n" " [--sa=SAS_ADDR] [type=TY] [--verbose] " "[--version]\n" " SMP_DEVICE[,N]\n" " where:\n" " --count=CO|-c CO register count (dwords to write) " "(def: 1)\n" " --data=H,H...|-d H,H... comma separated list of hex " "bytes to write\n" " --data=-|-d - read stdin for hex bytes to write\n" " --enhanced|-E use WRITE GPIO REGISTER ENHANCED " "function\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --index=IN|-i IN register index (def: 0)\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n" " --type=TY|-t TY register type (def: 0 (GPIO_CFG))\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP WRITE GPIO REGISTER (default) or SMP WRITE GPIO " "REGISTER\nENHANCED function\n" ); } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } static int read_hex(const char * inp, unsigned char * arr, int * arr_len) { int in_len, k, j, m, off; unsigned int h; const char * lcp; char * cp; char line[1024]; if ((NULL == inp) || (NULL == arr) || (NULL == arr_len)) return 1; lcp = inp; in_len = strlen(inp); if (0 == in_len) { *arr_len = 0; } if ('-' == inp[0]) { /* read from stdin */ for (j = 0, off = 0; j < 1024; ++j) { if (NULL == fgets(line, sizeof(line), stdin)) break; in_len = strlen(line); if (in_len > 0) { if ('\n' == line[in_len - 1]) { --in_len; line[in_len] = '\0'; } } if (0 == in_len) continue; lcp = line; m = strspn(lcp, " \t"); if (m == in_len) continue; lcp += m; in_len -= m; if ('#' == *lcp) continue; k = strspn(lcp, "0123456789aAbBcCdDeEfF ,\t"); if (in_len != k) { fprintf(stderr, "read_hex: syntax error at " "line %d, pos %d\n", j + 1, m + k + 1); return 1; } for (k = 0; k < 1024; ++k) { if (1 == sscanf(lcp, "%x", &h)) { if (h > 0xff) { fprintf(stderr, "read_hex: hex number " "larger than 0xff in line %d, pos %d\n", j + 1, (int)(lcp - line + 1)); return 1; } arr[off + k] = h; lcp = strpbrk(lcp, " ,\t"); if (NULL == lcp) break; lcp += strspn(lcp, " ,\t"); if ('\0' == *lcp) break; } else { fprintf(stderr, "read_hex: error in " "line %d, at pos %d\n", j + 1, (int)(lcp - line + 1)); return 1; } } off += k + 1; } *arr_len = off; } else { /* hex string on command line */ k = strspn(inp, "0123456789aAbBcCdDeEfF,"); if (in_len != k) { fprintf(stderr, "read_hex: error at pos %d\n", k + 1); return 1; } for (k = 0; k < 1024; ++k) { if (1 == sscanf(lcp, "%x", &h)) { if (h > 0xff) { fprintf(stderr, "read_hex: hex number larger " "than 0xff at pos %d\n", (int)(lcp - inp + 1)); return 1; } arr[k] = h; cp = strchr(lcp, ','); if (NULL == cp) break; lcp = cp + 1; } else { fprintf(stderr, "read_hex: error at pos %d\n", (int)(lcp - inp + 1)); return 1; } } *arr_len = k + 1; } return 0; } int main(int argc, char * argv[]) { int res, c, k, len, act_resplen, off; int rcount = 1; int do_data = 0; int enhanced = 0; int do_hex = 0; int rindex = 0; int phy_id = 0; int do_raw = 0; int rtype = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; unsigned char smp_req[SMP_MAX_REQ_LEN]; unsigned char smp_resp[8]; struct smp_target_obj tobj; struct smp_req_resp smp_rr; unsigned char data_arr[1024]; int arr_len = 0; int subvalue = 0; char * cp; char b[128]; int ret = 0; memset(device_name, 0, sizeof device_name); memset(i_params, 0, sizeof i_params); memset(smp_req, 0, sizeof smp_req); smp_req[0] = SMP_FRAME_TYPE_REQ; smp_req[1] = SMP_FN_WRITE_GPIO_REG; while (1) { int option_index = 0; c = getopt_long(argc, argv, "c:d:EhHi:I:p:rs:t:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'c': rcount = smp_get_num(optarg); if ((rcount < 1) || (rcount > 255)) { fprintf(stderr, "bad argument to '--count'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'd': memset(data_arr, 0, sizeof(data_arr)); if (read_hex(optarg, data_arr, &arr_len)) { fprintf(stderr, "bad argument to '--data'\n"); return SMP_LIB_SYNTAX_ERROR; } do_data = 1; break; case 'E': ++enhanced; break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'i': rindex = smp_get_num(optarg); if ((rindex < 0) || (rindex > 255)) { fprintf(stderr, "bad argument to '--index'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'p': phy_id = smp_get_num(optarg); if ((phy_id < 0) || (phy_id > 254)) { fprintf(stderr, "bad argument to '--phy', expect " "value from 0 to 254\n"); return SMP_LIB_SYNTAX_ERROR; } if (verbose) fprintf(stderr, "'--phy=' option not needed so " "ignored\n"); break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 't': rtype = smp_get_num(optarg); if ((rtype < 0) || (rtype > 255)) { fprintf(stderr, "bad argument to '--type'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((0 == do_data) || (arr_len < 1)) { fprintf(stderr, "need to supply data to write, see " "'--data=' option\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } if ((rcount * 4) != arr_len) { fprintf(stderr, "number of data bytes given (%d) needs " "to be 4 times count (%d)\n", arr_len, rcount); return SMP_LIB_SYNTAX_ERROR; } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after separator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; if (enhanced) { smp_req[1] = SMP_FN_WRITE_GPIO_REG_ENH; smp_req[2] = 0x0; /* response is only header+CRC */ smp_req[3] = rcount + 1;/* request: extra dword for register fields */ off = 2; } else off = 0; smp_req[2 + off] = rtype; smp_req[3 + off] = rindex; smp_req[4 + off] = rcount; for (k = 0; k < arr_len; ++k) smp_req[8 + k] = data_arr[k]; if (verbose) { fprintf(stderr, " Write GPIO register%s request: ", (enhanced ? " enhanced" : "")); for (k = 0; k < (12 + arr_len); ++k) fprintf(stderr, "%02x ", smp_req[k]); fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = 12 + arr_len; smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = 4 + (rcount * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[2]) ret = smp_resp[2]; goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { ret = smp_resp[2]; cp = smp_get_func_res_str(ret, sizeof(b), b); fprintf(stderr, "Write gpio register%s result: %s\n", (enhanced ? " enhanced" : ""), cp); goto err_out; } err_out: res = smp_initiator_close(&tobj); if (res < 0) { if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/src/smp_conf_zone_phy_info.c0000664000175000017500000004162111675012613020161 0ustar douggdougg/* * Copyright (c) 2011 Douglas Gilbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "smp_lib.h" /* This is a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) * utility. * * This utility issues a CONFIGURE ZONE PHY INFORMATION function and outputs * its response. */ static char * version_str = "1.03 20111222"; static struct option long_options[] = { {"expected", 1, 0, 'E'}, {"help", 0, 0, 'h'}, {"hex", 0, 0, 'H'}, {"interface", 1, 0, 'I'}, {"pconf", 1, 0, 'p'}, {"raw", 0, 0, 'r'}, {"sa", 1, 0, 's'}, {"save", 1, 0, 'S'}, {"verbose", 0, 0, 'v'}, {"version", 0, 0, 'V'}, {0, 0, 0, 0}, }; static void usage(void) { fprintf(stderr, "Usage: " "smp_conf_zone_phy_info [--expected=EX] [--help] [--hex]\n" " [--interface=PARAMS] " "--pconf=FN\n" " [--raw] [--sa=SAS_ADDR] " "[--save=SAV]\n" " [--verbose] [--version] " "SMP_DEVICE[,N]\n" " where:\n" " --expected=EX|-E EX set expected expander change " "count to EX\n" " --help|-h print out usage message\n" " --hex|-H print response in hexadecimal\n" " --interface=PARAMS|-I PARAMS specify or override " "interface\n" " --pconf=FN|-p FN FN is a file containing zone " "phy\n" " configuration descriptors in hex; " "required\n" " --raw|-r output response in binary\n" " --sa=SAS_ADDR|-s SAS_ADDR SAS address of SMP " "target (use leading\n" " '0x' or trailing 'h'). " "Depending on\n" " the interface, may not be " "needed\n" " --save=SAV|-S SAV SAV: 0 -> shadow (def); 1 -> " "saved\n" " 2 -> shadow (and saved if " "supported))\n" " 3 -> shadow and saved\n" " --verbose|-v increase verbosity\n" " --version|-V print version string and exit\n\n" "Performs a SMP CONFIGURE ZONE PHY INFORMATION function\n" ); } /* Read ASCII hex bytes from fname (a file named '-' taken as stdin). * There should be either one entry per line or a comma, space or tab * separated list of bytes. The first ASCII hex string detected has its * length checked; if the length is 1 or 2 then bytes are expected to * be space, comma or tab separated; if the length is 3 or more then a * string of ACSII hex digits is expected, 2 per byte. Everything from * and including a '#' on a line is ignored. * Returns 0 if ok, or 1 if error. */ static int f2hex_arr(const char * fname, unsigned char * mp_arr, int * mp_arr_len, int max_arr_len) { int fn_len, in_len, k, j, m; int no_space = 0; int checked_hexlen = 0; unsigned int h; const char * lcp; FILE * fp; char line[512]; int off = 0; if ((NULL == fname) || (NULL == mp_arr) || (NULL == mp_arr_len)) return 1; fn_len = strlen(fname); if (0 == fn_len) return 1; if ((1 == fn_len) && ('-' == fname[0])) /* read from stdin */ fp = stdin; else { fp = fopen(fname, "r"); if (NULL == fp) { fprintf(stderr, "Unable to open %s for reading\n", fname); return 1; } } for (j = 0; j < 512; ++j) { if (NULL == fgets(line, sizeof(line), fp)) break; in_len = strlen(line); if (in_len > 0) { if ('\n' == line[in_len - 1]) { --in_len; line[in_len] = '\0'; } } if (0 == in_len) continue; lcp = line; m = strspn(lcp, " \t"); if (m == in_len) continue; lcp += m; in_len -= m; if ('#' == *lcp) continue; if (! checked_hexlen) { ++checked_hexlen; k = strspn(lcp, "0123456789aAbBcCdDeEfF"); if (k > 2) no_space = 1; } k = strspn(lcp, "0123456789aAbBcCdDeEfF ,\t"); if ((k < in_len) && ('#' != lcp[k])) { fprintf(stderr, "f2hex_arr: syntax error at " "line %d, pos %d\n", j + 1, m + k + 1); goto bad; } if (no_space) { for (k = 0; isxdigit(*lcp) && isxdigit(*(lcp + 1)); ++k, lcp += 2) { if (1 != sscanf(lcp, "%2x", &h)) { fprintf(stderr, "f2hex_arr: bad hex number in line " "%d, pos %d\n", j + 1, (int)(lcp - line + 1)); goto bad; } if ((off + k) >= max_arr_len) { fprintf(stderr, "f2hex_arr: array length exceeded\n"); goto bad; } mp_arr[off + k] = h; } off += k; } else { for (k = 0; k < 1024; ++k) { if (1 == sscanf(lcp, "%x", &h)) { if (h > 0xff) { fprintf(stderr, "f2hex_arr: hex number " "larger than 0xff in line %d, pos %d\n", j + 1, (int)(lcp - line + 1)); goto bad; } if ((off + k) >= max_arr_len) { fprintf(stderr, "f2hex_arr: array length " "exceeded\n"); goto bad; } mp_arr[off + k] = h; lcp = strpbrk(lcp, " ,\t"); if (NULL == lcp) break; lcp += strspn(lcp, " ,\t"); if ('\0' == *lcp) break; } else { if ('#' == *lcp) { --k; break; } fprintf(stderr, "f2hex_arr: error in " "line %d, at pos %d\n", j + 1, (int)(lcp - line + 1)); goto bad; } } off += (k + 1); } } *mp_arr_len = off; fclose(fp); return 0; bad: fclose(fp); return 1; } static void dStrRaw(const char* str, int len) { int k; for (k = 0 ; k < len; ++k) printf("%c", str[k]); } int main(int argc, char * argv[]) { int res, c, k, len, num_desc, act_resplen; const char * pconf = NULL; int expected_cc = 0; int do_hex = 0; int do_raw = 0; int do_save = 0; int verbose = 0; long long sa_ll; unsigned long long sa = 0; char i_params[256]; char device_name[512]; char b[256]; unsigned char smp_req[1028]; unsigned char smp_resp[8]; struct smp_req_resp smp_rr; struct smp_target_obj tobj; int subvalue = 0; char * cp; int ret = 0; memset(smp_req, 0, sizeof(smp_req)); smp_req[0] = SMP_FRAME_TYPE_REQ; smp_req[1] = SMP_FN_CONFIG_ZONE_PHY_INFO; memset(device_name, 0, sizeof device_name); while (1) { int option_index = 0; c = getopt_long(argc, argv, "E:hHI:p:rs:S:vV", long_options, &option_index); if (c == -1) break; switch (c) { case 'E': expected_cc = smp_get_num(optarg); if ((expected_cc < 0) || (expected_cc > 65535)) { fprintf(stderr, "bad argument to '--expected'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'h': case '?': usage(); return 0; case 'H': ++do_hex; break; case 'I': strncpy(i_params, optarg, sizeof(i_params)); i_params[sizeof(i_params) - 1] = '\0'; break; case 'p': pconf = optarg; break; case 'r': ++do_raw; break; case 's': sa_ll = smp_get_llnum(optarg); if (-1LL == sa_ll) { fprintf(stderr, "bad argument to '--sa'\n"); return SMP_LIB_SYNTAX_ERROR; } sa = (unsigned long long)sa_ll; break; case 'S': do_save = smp_get_num(optarg); if ((do_save < 0) || (do_save > 3)) { fprintf(stderr, "bad argument to '--save'\n"); return SMP_LIB_SYNTAX_ERROR; } break; case 'v': ++verbose; break; case 'V': fprintf(stderr, "version: %s\n", version_str); return 0; default: fprintf(stderr, "unrecognised switch code 0x%x ??\n", c); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (optind < argc) { if ('\0' == device_name[0]) { strncpy(device_name, argv[optind], sizeof(device_name) - 1); device_name[sizeof(device_name) - 1] = '\0'; ++optind; } if (optind < argc) { for (; optind < argc; ++optind) fprintf(stderr, "Unexpected extra argument: %s\n", argv[optind]); usage(); return SMP_LIB_SYNTAX_ERROR; } } if (0 == device_name[0]) { cp = getenv("SMP_UTILS_DEVICE"); if (cp) strncpy(device_name, cp, sizeof(device_name) - 1); else { fprintf(stderr, "missing device name on command line\n [Could " "use environment variable SMP_UTILS_DEVICE instead]\n"); usage(); return SMP_LIB_SYNTAX_ERROR; } } if ((cp = strchr(device_name, SMP_SUBVALUE_SEPARATOR))) { *cp = '\0'; if (1 != sscanf(cp + 1, "%d", &subvalue)) { fprintf(stderr, "expected number after seperator in SMP_DEVICE " "name\n"); return SMP_LIB_SYNTAX_ERROR; } } if (0 == sa) { cp = getenv("SMP_UTILS_SAS_ADDR"); if (cp) { sa_ll = smp_get_llnum(cp); if (-1LL == sa_ll) { fprintf(stderr, "bad value in environment variable " "SMP_UTILS_SAS_ADDR\n"); fprintf(stderr, " use 0\n"); sa_ll = 0; } sa = (unsigned long long)sa_ll; } } if (sa > 0) { if (! smp_is_naa5(sa)) { fprintf(stderr, "SAS (target) address not in naa-5 format " "(may need leading '0x')\n"); if ('\0' == i_params[0]) { fprintf(stderr, " use '--interface=' to override\n"); return SMP_LIB_SYNTAX_ERROR; } } } if (NULL == pconf) { fprintf(stderr, "--pconf=FN option is required (i.e. it's not " "optional)\n"); return SMP_LIB_SYNTAX_ERROR; } if (f2hex_arr(pconf, smp_req + 8, &len, sizeof(smp_req) - 12)) { fprintf(stderr, "failed decoding --pconf=FN option\n"); return SMP_LIB_SYNTAX_ERROR; } num_desc = len / 4; if (0 != (len % 4)) { memset(smp_req + 8 + (4 * num_desc), 0, 4); fprintf(stderr, "warning: pconf data not a multiple of 4, ignore " "excess\n"); } res = smp_initiator_open(device_name, subvalue, i_params, sa, &tobj, verbose); if (res < 0) return SMP_LIB_FILE_ERROR; smp_req[3] = num_desc + 1; smp_req[4] = (expected_cc >> 8) & 0xff; smp_req[5] = expected_cc & 0xff; smp_req[6] = (1 << 2) | (do_save & 0x3); /* descriptor length is 1 dword */ smp_req[7] = num_desc; if (verbose) { fprintf(stderr, " Configure zone phy information request:"); for (k = 0; k < (12 + (num_desc * 4)); ++k) { if (0 == (k % 16)) fprintf(stderr, "\n "); else if (0 == (k % 8)) fprintf(stderr, " "); fprintf(stderr, "%02x ", smp_req[k]); } fprintf(stderr, "\n"); } memset(&smp_rr, 0, sizeof(smp_rr)); smp_rr.request_len = 12 + (num_desc * 4); smp_rr.request = smp_req; smp_rr.max_response_len = sizeof(smp_resp); smp_rr.response = smp_resp; res = smp_send_req(&tobj, &smp_rr, verbose); if (res) { fprintf(stderr, "smp_send_req failed, res=%d\n", res); if (0 == verbose) fprintf(stderr, " try adding '-v' option for more debug\n"); ret = -1; goto err_out; } if (smp_rr.transport_err) { fprintf(stderr, "smp_send_req transport_error=%d\n", smp_rr.transport_err); ret = -1; goto err_out; } act_resplen = smp_rr.act_response_len; if ((act_resplen >= 0) && (act_resplen < 4)) { fprintf(stderr, "response too short, len=%d\n", act_resplen); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } len = smp_resp[3]; if ((0 == len) && (0 == smp_resp[2])) { len = smp_get_func_def_resp_len(smp_resp[1]); if (len < 0) { len = 0; if (verbose > 0) fprintf(stderr, "unable to determine response length\n"); } } len = 4 + (len * 4); /* length in bytes, excluding 4 byte CRC */ if ((act_resplen >= 0) && (len > act_resplen)) { if (verbose) fprintf(stderr, "actual response length [%d] less than deduced " "length [%d]\n", act_resplen, len); len = act_resplen; } if (do_hex || do_raw) { if (do_hex) dStrHex((const char *)smp_resp, len, 1); else dStrRaw((const char *)smp_resp, len); if (SMP_FRAME_TYPE_RESP != smp_resp[0]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[1] != smp_req[1]) ret = SMP_LIB_CAT_MALFORMED; else if (smp_resp[2]) { if (verbose) fprintf(stderr, "Configure zone phy information result: %s\n", smp_get_func_res_str(smp_resp[2], sizeof(b), b)); ret = smp_resp[2]; } goto err_out; } if (SMP_FRAME_TYPE_RESP != smp_resp[0]) { fprintf(stderr, "expected SMP frame response type, got=0x%x\n", smp_resp[0]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[1] != smp_req[1]) { fprintf(stderr, "Expected function code=0x%x, got=0x%x\n", smp_req[1], smp_resp[1]); ret = SMP_LIB_CAT_MALFORMED; goto err_out; } if (smp_resp[2]) { cp = smp_get_func_res_str(smp_resp[2], sizeof(b), b); fprintf(stderr, "Configure zone phy information result: %s\n", cp); ret = smp_resp[2]; goto err_out; } err_out: res = smp_initiator_close(&tobj); if (res < 0) { fprintf(stderr, "close error: %s\n", safe_strerror(errno)); if (0 == ret) return SMP_LIB_FILE_ERROR; } if (ret < 0) ret = SMP_LIB_CAT_OTHER; if (verbose && ret) fprintf(stderr, "Exit status %d indicates error detected\n", ret); return ret; } smp_utils-0.97/README0000664000175000017500000000276011706323015013351 0ustar douggdouggThis is a package of utilities. Each utility sends a Serial Attached SCSI (SAS) Serial Management Protocol (SMP) request to an SMP target. If the request fails then the error is decoded. If the request succeeds then the response is either decoded, printed out in hexadecimal or output in binary. This package was written using the linux 2.6 series and has been ported to FreeBSD and Solaris. For specific information about Linux see README.linux; for FreeBSD see README.freebsd and for Solaris see README.solaris . See COVERAGE file for more information about the coverage of various SMP functions. Each utility in the smp_utils package has a corresponding man page. Additionally there is a 'smp_utils' man page that contains common information, including options used by most or all utilities plus the various exit status values. There are examples of setting up and disabling zoning in the examples directory. The reference documents are: sas-r05.pdf www.t10.org draft prior to original SAS spec sas1r10.pdf www.t10.org draft prior to SAS 1.1 spec sas2r16.pdf www.t10.org draft prior to SAS-2 spl-r07.pdf www.t10.org draft prior to SAS-2.1 spl2r03.pdf www.t10.org current draft SFF_8485.PDF www.sffcommittee.com SGPIO revision 0.7 In SAS-2.1 the physical layer was put into a document of that name (i.e. SAS-2.1) while the higher layers were put in a new document called the SAS Protocol Layer (SPL). Doug Gilbert 20th January 2012 smp_utils-0.97/CREDITS0000664000175000017500000000066010740202440013501 0ustar douggdouggThe author of smp_utils would like to thank the following people who have made contributions: Eric Moore help with mptctl interface [20061129] Luben Tuikov 'smp_discover --multiple' format and various other suggestions and testing [20060801] FUJITA Tomonori implementing sgv4 ith working examples [20071220] smp_utils-0.97/README.freebsd0000664000175000017500000000254511706323015014763 0ustar douggdouggBuild ----- For general build information see the INSTALL file. Unfortunately FreeBSD versions 8.2 and earlier do not support the CAM SMP pass-through. The traditional './configure ; make ; make install' sequence from the top level of the unpacked tarball will work on FreeBSD. But the man pages will be placed under the /usr/local/share/man directory which unfortunately is not on the standard manpath. One solution is to add this path by creating a file with a name like local_share.conf in the /usr/local/etc/man.d/ directory and placing this line in it: MANPATH /usr/local/share/man Since this package is new in FreeBSD 9.0 there is no "ports" entry to build and install it. /usr/ports/sysutils/sg3_utils is a closely related package and could be used as a template. Device names ------------ FreeBSD uses its CAM subsystem to access SAS expanders. In FreeBSD 9 CAM does not recognize SAS expanders directly. It assumes that a SAS expander is tightly coupled with a SES target device. This seems to be true for SAS-2 expanders but is not necessarily the case with SAS-1 expanders. So if a SES target device is paired with a SAS expander then in FreeBSD that expander can be accessed like this: # smp_discover /dev/ses0 This also assumes that the SAS expander is connected to a SAS HBA that supports the CAM SAS SMP pass-through. Douglas Gilbert 17th January 2012 smp_utils-0.97/debian/0000755000175000017500000000000011706323060013704 5ustar douggdouggsmp_utils-0.97/debian/control0000664000175000017500000000252711617030111015310 0ustar douggdouggSource: smp-utils Section: admin Priority: optional Maintainer: Douglas Gilbert Build-Depends: debhelper (>= 7.0.50~) Standards-Version: 3.8.4 Homepage: http://sg.danny.cz/sg/smp_utils.html Package: smp-utils Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends} Description: SAS Expander (SMP) utilities for SAS/SATA disk arrays Utilities that send Serial Attached SCSI (SAS) Serial Management Protocol (SMP) requests to a SMP target. If the request fails then the error is decoded. If the request succeeds then the response is either decoded, printed out in hexadecimal or output in binary. Support for SAS-2 features including phy based zoning. Package: libsmputils1-1 Section: libs Depends: ${shlibs:Depends} Architecture: any Conflicts: libsmputils1 Replaces: libsmputils1 Suggests: smp-utils Description: utilities for SAS SMP control of expanders (shared libraries) Shared library used by the utilities in the smp-utils package. Package: libsmputils1-dev Section: libdevel Architecture: any Depends: libsmputils1-1 (= ${binary:Version}), ${shlibs:Depends}, ${kfreebsd:Depends} Conflicts: libsmputils1-dev Suggests: smp-utils Description: utilities for SAS SMP control of expanders (developer files) Developer files (i.e. headers and a static library) which are associated with the utilities in the smp-utils package. smp_utils-0.97/debian/smp-utils.install0000664000175000017500000000004011605406513017230 0ustar douggdouggusr/sbin/* usr/share/man/man8/* smp_utils-0.97/debian/libsmputils1-dev.install0000664000175000017500000000006711617030111020476 0ustar douggdouggusr/include/scsi usr/lib/*.so usr/lib/*.la usr/lib/*.a smp_utils-0.97/debian/docs0000664000175000017500000000005411535532675014576 0ustar douggdouggAUTHORS COPYING CREDITS INSTALL NEWS README smp_utils-0.97/debian/copyright0000664000175000017500000000240311126061623015640 0ustar douggdouggThis package was debianized by Douglas Gilbert on Sat, 10 Jun 2006 19:00:00 -0400. It was downloaded from http://sg.danny.cz/sg/p/smp_utils-0.90.tgz Copyright Holder: Douglas Gilbert License: Redistribution and use in source and binary forms, with or without modification, are permitted under the terms of the BSD License. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. On Debian systems, the complete text of the BSD License can be found in `/usr/share/common-licenses/BSD'. smp_utils-0.97/debian/libsmputils1-1.install0000664000175000017500000000001711617030111020053 0ustar douggdouggusr/lib/*.so.* smp_utils-0.97/debian/rules0000664000175000017500000000403011665236170014771 0ustar douggdougg#!/usr/bin/make -f # Sample debian/rules that uses debhelper. # GNU copyright 1997 by Joey Hess. # # This version is for a hypothetical package that builds an # architecture-dependant package, as well as an architecture-independent # package. # Uncomment this to turn on verbose mode. # export DH_VERBOSE=1 DEB_HOST_ARCH_OS := $(shell dpkg-architecture -qDEB_HOST_ARCH_OS 2>/dev/null) configure: configure-stamp configure-stamp: dh_testdir # Add here commands to configure the package. CFLAGS="$(CFLAGS)" ./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr --mandir=\$${prefix}/share/man touch configure-stamp build: configure-stamp build-stamp build-stamp: dh_testdir # Add here commands to compile the package. PREFIX=/usr MANDIR=/usr/share/man $(MAKE) -e touch build-stamp clean: dh_testdir dh_testroot # Add here commands to clean up after the build process. -$(MAKE) distclean rm -f build-stamp configure-stamp debian/substvars dh_clean install: DH_OPTIONS= install: build dh_testdir dh_testroot dh_clean dh_installdirs # Add here commands to install the package into debian/tmp $(MAKE) -e install DESTDIR=$(CURDIR)/debian/tmp PREFIX=/usr dh_install --autodest --sourcedir=debian/tmp dh_installman # Build architecture-independent files here. # Pass -i to all debhelper commands in this target to reduce clutter. binary-indep: build install # nothing to do here # Build architecture-dependent files here. binary-arch: build install dh_testdir -a dh_testroot -a dh_installdocs -a dh_installexamples -a dh_installmenu -a dh_installchangelogs ChangeLog -a dh_strip -a dh_link -a dh_compress -a -X archive -X .c -X .h dh_fixperms -a dh_makeshlibs -V -v dh_installdeb -a ifeq ($(DEB_HOST_ARCH_OS),kfreebsd) echo kfreebsd:Depends=libcam-dev >>debian/libsmputils1-dev.substvars endif dh_shlibdeps -ldebian/tmp/usr/lib -L libsmputils1 dh_gencontrol -a dh_md5sums -a dh_builddeb -a binary: binary-indep binary-arch .PHONY: build clean binary-indep binary-arch binary install configure smp_utils-0.97/debian/changelog0000664000175000017500000000245711706323015015570 0ustar douggdouggsmp-utils (0.97-0.1) unstable; urgency=low * switch to autotools style build -- Douglas Gilbert Fri, 20 Jan 2012 11:00:00 -0500 smp-utils (0.96-0.1) unstable; urgency=low * add zoning for SAS-2 -- Douglas Gilbert Sun, 19 Jun 2011 16:00:00 -0400 smp-utils (0.95-0.1) unstable; urgency=low * discover changes in spl-r04 -- Douglas Gilbert Tue, 16 Nov 2010 21:00:00 -0500 smp-utils (0.94-0.1) unstable; urgency=low * make sgv4 includes more robust for lk 2.6.27 -- Douglas Gilbert Mon, 29 Dec 2008 12:30:00 -0500 smp-utils (0.93-0.1) unstable; urgency=low * add affiliation contexts (new in sas2r08), sync to sas2r12 -- Douglas Gilbert Sun, 06 Jan 2008 11:00:00 -0500 smp-utils (0.92-0.1) unstable; urgency=low * sync against sas2r07, add smp_conf_general -- Douglas Gilbert Fri, 08 Dec 2006 13:00:00 -0500 smp-utils (0.91-0.1) unstable; urgency=low * add smp_phy_test and smp_discover_list, uniform exit status values -- Douglas Gilbert Tue, 22 Aug 2006 16:00:00 -0400 smp-utils (0.90-0.1) unstable; urgency=low * Initial release -- Douglas Gilbert Mon, 10 Jun 2006 19:00:00 -0400 smp_utils-0.97/debian/compat0000664000175000017500000000000211617030111015075 0ustar douggdougg7