srptools-1.0.2/0000755000175000001440000000000012301664041010371 500000000000000srptools-1.0.2/srptools.spec0000644000175000001440000001036612301664041013060 00000000000000 Name: srptools Version: 1.0.2 Release: 1%{?dist} Summary: Tools for SRP/IB Group: Applications/System License: GPL/BSD Url: http://www.openfabrics.org/ Source: http://www.openfabrics.org/downloads/%{name}-%{version}.tar.gz BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) %description In conjunction with the kernel ib_srp driver, srptools allows you to discover and use SCSI devices via the SCSI RDMA Protocol over InfiniBand. %prep rm -rf $RPM_BUILD_ROOT %setup -q -n %{name}-%{version} %build %configure make %{?_smp_mflags} %install make DESTDIR=%{buildroot} install %clean rm -rf $RPM_BUILD_ROOT %post if [ $1 = 1 ]; then # 1 : This package is being installed for the first time for ib_conf_file in /etc/infiniband/openib.conf /etc/rdma/rdma.conf; do if [ -e $ib_conf_file ] && ! grep -q '^SRPHA_ENABLE=' $ib_conf_file; then cat <>$ib_conf_file # Enable SRP High Availability daemon SRPHA_ENABLE=no SRP_DAEMON_ENABLE=no EOF fi done if [ -e /sbin/chkconfig ]; then /sbin/chkconfig --add srpd elif [ -e /usr/sbin/update-rc.d ]; then /usr/sbin/update-rc.d srpd defaults else /usr/lib/lsb/install_initd /etc/init.d/srpd fi fi if type systemctl >/dev/null 2>&1; then systemctl --system daemon-reload fi if [ $1 != 1 ]; then /etc/init.d/srpd condrestart fi %preun if [ $1 = 0 ]; then /etc/init.d/srpd stop if [ -e /sbin/chkconfig ]; then /sbin/chkconfig --del srpd elif [ -e /usr/sbin/update-rc.d ]; then /usr/sbin/update-rc.d -f srpd remove else /usr/lib/lsb/remove_initd /etc/init.d/srpd fi fi %files %defattr(-,root,root) %config(noreplace) /etc/srp_daemon.conf %config(noreplace) %{_sysconfdir}/logrotate.d/srp_daemon %config(noreplace) %{_sysconfdir}/rsyslog.d/srp_daemon.conf %{_sysconfdir}/init.d/srpd %{_sbindir}/ibsrpdm %{_sbindir}/run_srp_daemon %{_sbindir}/srp_daemon %{_sbindir}/srp_daemon.sh %{_mandir}/man1/ibsrpdm.1* %{_mandir}/man1/srp_daemon.1* %doc README NEWS ChangeLog COPYING %changelog * Thu Feb 20 2014 Bart Van Assche - 1.0.2 - Added support for specifying tl_retry_count in srp_daemon.conf. Changed default behavior for tl_retry_timeout parameter from setting it to 2 into leaving it at its default value (7). This makes srp_daemon again compatible with the SRP initiator driver from kernel 3.12 and before. * Mon Feb 03 2014 Bart Van Assche - 1.0.1 - Make process uniqueness check work. - Unsubscribe from subnet manager for traps before exiting. - Added support for the comp_vector and queue_size configuration file options. * Tue Dec 24 2013 Sagi Grimberg and Bart Van Assche - 1.0.0 - srp_daemon keeps working even if the LID changes of the port it is using to scan the fabric or if a P_Key change occurs. - Added P_Key support to srp_daemon and ibsrpdm. - Fixed month in srp_daemon.log (OFED bug \#2281). srp_daemon now uses syslog and logrotate for logging. - srp_daemon is now only started for InfiniBand ports. It is no longer attempted to start srp_daemon on Ethernet ports. - Added support for specifying the tl_retry_count parameter. By default use tl_retry_count=2. - Allow srp_daemon to be started without configuration file. - Fixed a memory leak in srp_daemon that was triggered once during every fabric rescan. - Reduced memory consumption of the srp_daemon process. - MAD transaction ID 0 is skipped after 2**32 rescans. - Installation: SRPHA_ENABLE=no / SRP_DAEMON_ENABLE=no is only added to /etc/infiniband/openibd.conf if these variables did not yet exist in that file. - Changed range of the srp_daemon and ibsrpdm exit codes from 0..127 into 0..1. - Changed ibsrpdm such that it uses the new umad P_Key ABI. Running ibsrpdm does no longer cause a warning to be logged ("user_mad: process ibsrpdm did not enable P_Key index support / user_mad: Documentation/infiniband/user_mad.txt has info on the new ABI"). - Fixed spelling of several help texts and diagnostic messages. * Wed Aug 22 2007 Vladimir Sokolovsky - Added srp_daemon.conf * Tue Sep 5 2006 Vladimir Sokolovsky - Added srp_daemon and scripts to execute this daemon * Tue Mar 21 2006 Roland Dreier - 0.0.4-1 - Initial attempt at a working spec file srptools-1.0.2/README0000644000175000001440000000611112256536330011200 00000000000000Introduction ============ srptools is a package of tools for discovering and connecting to SRP SCSI targets on InfiniBand fabrics. These targets can be accessed with the InfiniBand SRP initiator module, "ib_srp," included in Linux kernels 2.6.15 and newer. Using srptools ============== srptools currently contains only a single executable, ibsrpdm. To run ibsrpdm, the ib_umad module must be loaded, as well as an appropriate low-level driver for the installed IB hardware -- for example, ib_mthca for a Mellanox HCA, ib_ipath for a QLogic HCA, or hcad_mod for an IBM eHCA. With no command line parameters, ibsrpdm displays information about SRP targets in human-readable form: # ibsrpdm IO Unit Info: port LID: 0009 port GID: fe800000000000000005ad00000013e9 change ID: 73b0 max controllers: 0x01 controller[ 1] GUID: 0005ad00000013e7 vendor ID: 0005ad device ID: 0005ad IO class : 0100 ID: Topspin SRP/FC TCA service entries: 2 service[ 0]: 0000000000000066 / SRP.T10:20030003BA27CC7A service[ 1]: 0000000000000066 / SRP.T10:20030003BA27CF53 With the "-c" flag, ibsrpdm displays information in a form that can be written to the kernel SRP initiators add_target file to connect to the SRP targets. For example: # ibsrpdm -c id_ext=20030003BA27CC7A,ioc_guid=0005ad00000013e7,dgid=fe800000000000000005ad00000013e9,pkey=ffff,service_id=0000000000000066 id_ext=20030003BA27CF53,ioc_guid=0005ad00000013e7,dgid=fe800000000000000005ad00000013e9,pkey=ffff,service_id=0000000000000066 Given this, the command below will connect to the first target discovered from the first port of the local HCA device "mthca0": # echo -n id_ext=20030003BA27CC7A,ioc_guid=0005ad00000013e7,dgid=fe800000000000000005ad00000013e9,pkey=ffff,service_id=0000000000000066 > /sys/class/infiniband_srp/srp-mthca0-1/add_target Reporting bugs ============== Bugs should be reported to the OpenIB mailing list . In your bug report, please include: * Information about your system: - Linux distribution and version - Linux kernel and version - InfiniBand hardware and firmware version - ... any other relevant information * How to reproduce the bug. * If the bug is a crash, the exact output printed out when the crash occurred, including any kernel messages produced. Submitting patches ================== Patches should also be submitted to the OpenIB mailing list . Please use unified diff form (the -u option to GNU diff), and include a good description of what your patch does and why it should be applied. If your patch fixes a bug, please make sure to describe the bug and how your fix works. Please include a change to the ChangeLog file (in standard GNU changelog format) as part of your patch. Make sure that your contribution can be licensed under the same license as the original code you are patching, and that you have all necessary permissions to release your work. srptools-1.0.2/aclocal.m40000644000175000001440000011611212301422331012145 00000000000000# generated automatically by aclocal 1.13.4 -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, [m4_warning([this file was generated for autoconf 2.69. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically 'autoreconf'.])]) # Copyright (C) 2002-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.13' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.13.4], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.13.4])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to # '$srcdir', '$srcdir/..', or '$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is '.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ([2.52])dnl m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], [$1], [CXX], [depcc="$CXX" am_compiler_list=], [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], [$1], [UPC], [depcc="$UPC" am_compiler_list=], [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi am__universal=false m4_case([$1], [CC], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac], [CXX], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac]) for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES. AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE([dependency-tracking], [dnl AS_HELP_STRING( [--enable-dependency-tracking], [do not reject slow dependency extractors]) AS_HELP_STRING( [--disable-dependency-tracking], [speeds up one-time build])]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl AC_SUBST([am__nodep])dnl _AM_SUBST_NOTMAKE([am__nodep])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named 'Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each '.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.65])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [AC_DIAGNOSE([obsolete], [$0: two- and three-arguments forms are deprecated.]) m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if( m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), [ok:ok],, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) AM_MISSING_PROG([AUTOCONF], [autoconf]) AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) AM_MISSING_PROG([AUTOHEADER], [autoheader]) AM_MISSING_PROG([MAKEINFO], [makeinfo]) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # AC_SUBST([mkdir_p], ['$(MKDIR_P)']) # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES([CC])], [m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES([CXX])], [m4_define([AC_PROG_CXX], m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES([OBJC])], [m4_define([AC_PROG_OBJC], m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], [_AM_DEPENDENCIES([OBJCXX])], [m4_define([AC_PROG_OBJCXX], m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl ]) AC_REQUIRE([AM_SILENT_RULES])dnl dnl The testsuite driver may need to know about EXEEXT, so add the dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl ]) dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi AC_SUBST([install_sh])]) # Copyright (C) 2003-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from 'make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Copyright (C) 1999-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_CC_C_O # -------------- # Like AC_PROG_CC_C_O, but changed for automake. AC_DEFUN([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC_C_O])dnl AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([compile])dnl # FIXME: we rely on the cache variable name because # there is no other way. set dummy $CC am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o if test "$am_t" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi dnl Make sure AC_PROG_CC is never called again, or it will override our dnl setting of CC. m4_define([AC_PROG_CC], [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])]) ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it is modern enough. # If it is, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= AC_MSG_WARN(['missing' script is too old or missing]) fi ]) # -*- Autoconf -*- # Obsolete and "removed" macros, that must however still report explicit # error messages when used, to smooth transition. # # Copyright (C) 1996-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. AC_DEFUN([AM_CONFIG_HEADER], [AC_DIAGNOSE([obsolete], ['$0': this macro is obsolete. You should use the 'AC][_CONFIG_HEADERS' macro instead.])dnl AC_CONFIG_HEADERS($@)]) AC_DEFUN([AM_PROG_CC_STDC], [AC_PROG_CC am_cv_prog_cc_stdc=$ac_cv_prog_cc_stdc AC_DIAGNOSE([obsolete], ['$0': this macro is obsolete. You should simply use the 'AC][_PROG_CC' macro instead. Also, your code should no longer depend upon 'am_cv_prog_cc_stdc', but upon 'ac_cv_prog_cc_stdc'.])]) AC_DEFUN([AM_C_PROTOTYPES], [AC_FATAL([automatic de-ANSI-fication support has been removed])]) AU_DEFUN([fp_C_PROTOTYPES], [AM_C_PROTOTYPES]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # -------------------- # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), [1])]) # _AM_SET_OPTIONS(OPTIONS) # ------------------------ # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi if test "$[2]" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT([yes]) # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi AC_CONFIG_COMMANDS_PRE( [AC_MSG_CHECKING([that generated files are newer than configure]) if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi AC_MSG_RESULT([done])]) rm -f conftest.file ]) # Copyright (C) 2009-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SILENT_RULES([DEFAULT]) # -------------------------- # Enable less verbose build rules; with the default set to DEFAULT # ("yes" being less verbose, "no" or empty being verbose). AC_DEFUN([AM_SILENT_RULES], [AC_ARG_ENABLE([silent-rules], [dnl AS_HELP_STRING( [--enable-silent-rules], [less verbose build output (undo: "make V=1")]) AS_HELP_STRING( [--disable-silent-rules], [verbose build output (undo: "make V=0")])dnl ]) case $enable_silent_rules in @%:@ ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; esac dnl dnl A few 'make' implementations (e.g., NonStop OS and NextStep) dnl do not support nested variable expansions. dnl See automake bug#9928 and bug#10237. am_make=${MAKE-make} AC_CACHE_CHECK([whether $am_make supports nested variables], [am_cv_make_support_nested_variables], [if AS_ECHO([['TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi]) if test $am_cv_make_support_nested_variables = yes; then dnl Using '$V' instead of '$(V)' breaks IRIX make. AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AC_SUBST([AM_V])dnl AM_SUBST_NOTMAKE([AM_V])dnl AC_SUBST([AM_DEFAULT_V])dnl AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl AC_SUBST([AM_DEFAULT_VERBOSITY])dnl AM_BACKSLASH='\' AC_SUBST([AM_BACKSLASH])dnl _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl ]) # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor 'install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in "make install-strip", and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # AM_SUBST_NOTMAKE(VARIABLE) # -------------------------- # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of 'v7', 'ustar', or 'pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar # AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AC_SUBST([AMTAR], ['$${TAR-tar}']) # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' m4_if([$1], [v7], [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], [m4_case([$1], [ustar], [# The POSIX 1988 'ustar' format is defined with fixed-size fields. # There is notably a 21 bits limit for the UID and the GID. In fact, # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 # and bug#13588). am_max_uid=2097151 # 2^21 - 1 am_max_gid=$am_max_uid # The $UID and $GID variables are not portable, so we need to resort # to the POSIX-mandated id(1) utility. Errors in the 'id' calls # below are definitely unexpected, so allow the users to see them # (that is, avoid stderr redirection). am_uid=`id -u || echo unknown` am_gid=`id -g || echo unknown` AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) if test $am_uid -le $am_max_uid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) if test $am_gid -le $am_max_gid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi], [pax], [], [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Go ahead even if we have the value already cached. We do so because we # need to set the values for the 'am__tar' and 'am__untar' variables. _am_tools=${am_cv_prog_tar_$1-$_am_tools} for _am_tool in $_am_tools; do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works. rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR srptools-1.0.2/Makefile.am0000644000175000001440000000536612274112263012362 00000000000000# $Id$ AM_CFLAGS = -Wall -Wextra -Wno-sign-compare -Wno-unused-parameter sbin_PROGRAMS = srp_daemon/srp_daemon man_MANS = man/ibsrpdm.1 man/srp_daemon.1 srp_daemon_srp_daemon_LDADD = -libumad -libverbs -lpthread srp_daemon_srp_daemon_CFLAGS = $(AM_CFLAGS) -I $(DESTDIR)$(includedir) \ -fno-strict-aliasing srp_daemon_srp_daemon_SOURCES = srp_daemon/srp_daemon.c srp_daemon/srp_handle_traps.c srp_daemon/srp_sync.c sbin_SCRIPTS = \ srp_daemon/srp_daemon.sh EXTRA_DIST = \ srp_daemon/srp_daemon.h \ srp_daemon/srp_ib_types.h \ srp_daemon/srp_daemon.sh \ srp_daemon/srpd.in \ srp_daemon/logrotate-srp_daemon \ srp_daemon/rsyslog-srp_daemon.conf \ srp_daemon/srp_daemon.conf \ srptools.spec.in $(man_MANS) dist-hook: srptools.spec cp srptools.spec $(distdir) install-exec-hook: mkdir -p $(DESTDIR)$(sysconfdir)/init.d @INSTALL_PROGRAM@ srp_daemon/srpd $(DESTDIR)$(sysconfdir)/init.d/srpd if test -e $(DESTDIR)$(sbindir)/ibsrpdm; then \ rm -f $(DESTDIR)$(sbindir)/ibsrpdm; \ fi; \ cd $(DESTDIR)$(sbindir) && ln -s srp_daemon ibsrpdm # Backward compatability for DDN supplied srptools package if test -e $(DESTDIR)$(sbindir)/run_srp_daemon; then \ rm -f $(DESTDIR)$(sbindir)/run_srp_daemon; \ fi; \ cd $(DESTDIR)$(sbindir) && ln -s srp_daemon run_srp_daemon install-data-hook: if test -e $(DESTDIR)$(sysconfdir)/srp_daemon.conf; then \ diff -q $(srcdir)/srp_daemon/srp_daemon.conf \ $(DESTDIR)$(sysconfdir)/srp_daemon.conf 1>/dev/null; \ if test $$? == 1; then \ t=$(shell date +'%Y%m%d%H%M%S'); \ @INSTALL_DATA@ $(srcdir)/srp_daemon/srp_daemon.conf \ $(DESTDIR)$(sysconfdir)/srp_daemon.conf.$$t; \ echo "NOTE: existing srp_daemon.conf was not updated."; \ echo " srp_daemon.conf installed as" \ "srp_daemon.conf.$$t instead."; \ fi; \ else \ mkdir -p $(DESTDIR)$(sysconfdir); \ @INSTALL_DATA@ $(srcdir)/srp_daemon/srp_daemon.conf \ $(DESTDIR)$(sysconfdir); \ fi mkdir -p $(DESTDIR)$(sysconfdir)/logrotate.d @INSTALL_DATA@ $(srcdir)/srp_daemon/logrotate-srp_daemon \ $(DESTDIR)$(sysconfdir)/logrotate.d/srp_daemon mkdir -p $(DESTDIR)$(sysconfdir)/rsyslog.d @INSTALL_DATA@ $(srcdir)/srp_daemon/rsyslog-srp_daemon.conf \ $(DESTDIR)$(sysconfdir)/rsyslog.d/srp_daemon.conf rpm: name=@PACKAGE@ && \ version=@VERSION@ && \ rpmtopdir="$$(if [ $$(id -u) = 0 ]; then echo /usr/src/packages; \ else echo $$PWD/rpmbuilddir; fi)" && \ make dist-gzip && \ rm -rf $${rpmtopdir} && \ mkdir -p $${rpmtopdir}/{BUILD,RPMS,SOURCES,SPECS,SRPMS} && \ cp $${name}-$${version}.tar.gz $${rpmtopdir}/SOURCES && \ rpmbuild --define="%_topdir $${rpmtopdir}" -ba $${name}.spec deb: ./build-deb.sh ${TARGET} srptools-1.0.2/srptools.spec.in0000644000175000001440000001037212301605066013464 00000000000000 Name: srptools Version: @VERSION@ Release: 1%{?dist} Summary: Tools for SRP/IB Group: Applications/System License: GPL/BSD Url: http://www.openfabrics.org/ Source: http://www.openfabrics.org/downloads/%{name}-%{version}.tar.gz BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) %description In conjunction with the kernel ib_srp driver, srptools allows you to discover and use SCSI devices via the SCSI RDMA Protocol over InfiniBand. %prep rm -rf $RPM_BUILD_ROOT %setup -q -n %{name}-%{version} %build %configure make %{?_smp_mflags} %install make DESTDIR=%{buildroot} install %clean rm -rf $RPM_BUILD_ROOT %post if [ $1 = 1 ]; then # 1 : This package is being installed for the first time for ib_conf_file in /etc/infiniband/openib.conf /etc/rdma/rdma.conf; do if [ -e $ib_conf_file ] && ! grep -q '^SRPHA_ENABLE=' $ib_conf_file; then cat <>$ib_conf_file # Enable SRP High Availability daemon SRPHA_ENABLE=no SRP_DAEMON_ENABLE=no EOF fi done if [ -e /sbin/chkconfig ]; then /sbin/chkconfig --add srpd elif [ -e /usr/sbin/update-rc.d ]; then /usr/sbin/update-rc.d srpd defaults else /usr/lib/lsb/install_initd /etc/init.d/srpd fi fi if type systemctl >/dev/null 2>&1; then systemctl --system daemon-reload fi if [ $1 != 1 ]; then /etc/init.d/srpd condrestart fi %preun if [ $1 = 0 ]; then /etc/init.d/srpd stop if [ -e /sbin/chkconfig ]; then /sbin/chkconfig --del srpd elif [ -e /usr/sbin/update-rc.d ]; then /usr/sbin/update-rc.d -f srpd remove else /usr/lib/lsb/remove_initd /etc/init.d/srpd fi fi %files %defattr(-,root,root) %config(noreplace) /etc/srp_daemon.conf %config(noreplace) %{_sysconfdir}/logrotate.d/srp_daemon %config(noreplace) %{_sysconfdir}/rsyslog.d/srp_daemon.conf %{_sysconfdir}/init.d/srpd %{_sbindir}/ibsrpdm %{_sbindir}/run_srp_daemon %{_sbindir}/srp_daemon %{_sbindir}/srp_daemon.sh %{_mandir}/man1/ibsrpdm.1* %{_mandir}/man1/srp_daemon.1* %doc README NEWS ChangeLog COPYING %changelog * Thu Feb 20 2014 Bart Van Assche - 1.0.2 - Added support for specifying tl_retry_count in srp_daemon.conf. Changed default behavior for tl_retry_timeout parameter from setting it to 2 into leaving it at its default value (7). This makes srp_daemon again compatible with the SRP initiator driver from kernel 3.12 and before. * Mon Feb 03 2014 Bart Van Assche - 1.0.1 - Make process uniqueness check work. - Unsubscribe from subnet manager for traps before exiting. - Added support for the comp_vector and queue_size configuration file options. * Tue Dec 24 2013 Sagi Grimberg and Bart Van Assche - 1.0.0 - srp_daemon keeps working even if the LID changes of the port it is using to scan the fabric or if a P_Key change occurs. - Added P_Key support to srp_daemon and ibsrpdm. - Fixed month in srp_daemon.log (OFED bug \#2281). srp_daemon now uses syslog and logrotate for logging. - srp_daemon is now only started for InfiniBand ports. It is no longer attempted to start srp_daemon on Ethernet ports. - Added support for specifying the tl_retry_count parameter. By default use tl_retry_count=2. - Allow srp_daemon to be started without configuration file. - Fixed a memory leak in srp_daemon that was triggered once during every fabric rescan. - Reduced memory consumption of the srp_daemon process. - MAD transaction ID 0 is skipped after 2**32 rescans. - Installation: SRPHA_ENABLE=no / SRP_DAEMON_ENABLE=no is only added to /etc/infiniband/openibd.conf if these variables did not yet exist in that file. - Changed range of the srp_daemon and ibsrpdm exit codes from 0..127 into 0..1. - Changed ibsrpdm such that it uses the new umad P_Key ABI. Running ibsrpdm does no longer cause a warning to be logged ("user_mad: process ibsrpdm did not enable P_Key index support / user_mad: Documentation/infiniband/user_mad.txt has info on the new ABI"). - Fixed spelling of several help texts and diagnostic messages. * Wed Aug 22 2007 Vladimir Sokolovsky - Added srp_daemon.conf * Tue Sep 5 2006 Vladimir Sokolovsky - Added srp_daemon and scripts to execute this daemon * Tue Mar 21 2006 Roland Dreier - 0.0.4-1 - Initial attempt at a working spec file srptools-1.0.2/configure.ac0000644000175000001440000000435212301422331012575 00000000000000# -*- Autoconf -*- # Process this file with autoconf to produce a configure script. AC_PREREQ(2.57) AC_INIT(srptools, 1.0.2, users@lists.openfabrics.org) AC_CONFIG_SRCDIR(srp_daemon/srp_daemon.c) AC_CONFIG_AUX_DIR(config) AM_CONFIG_HEADER(config.h) AM_INIT_AUTOMAKE([-Wall -Werror foreign]) AC_ARG_ENABLE(libcheck, [ --disable-libcheck do not test for presence of ib libraries], [ if test x$enableval = xno ; then disable_libcheck=yes fi ]) # resolve config dir. conf_dir_tmp1="`eval echo ${sysconfdir} | sed 's/^NONE/$ac_default_prefix/'`" SYS_CONFIG_DIR="`eval echo $conf_dir_tmp1`" AC_ARG_WITH([rdma_service], AC_HELP_STRING([--with-rdma-service=name], [name of the RDMA service: "rdma" when using /etc/init.d/rdma to start RDMA services; "openibd" when using /etc/init.d/openibd to start RDMA services [default=openibd]])) AC_SUBST(RDMA_SERVICE, ${with_rdma_service:-openibd}) if { rpm -q sles-release || rpm -q openSUSE-release; } >/dev/null 2>&1; then default_start="2 3 5" default_stop="0 1 4 6" else default_start="2 3 4 5" default_stop="0 1 6" fi AC_SUBST(DEFAULT_START, $default_start) AC_SUBST(DEFAULT_STOP, $default_stop) # Checks for programs. AC_PROG_CC AM_PROG_CC_C_O # Checks for libraries. if test "$disable_libcheck" != "yes" then AC_CHECK_LIB([ibumad], [umad_init], [], AC_MSG_ERROR([srptools requires libibumad.])) AC_CHECK_LIB([ibverbs], [ibv_get_device_list], [], AC_MSG_ERROR([srptools requires libibverbs.])) fi AC_CHECK_LIB([pthread], [pthread_self], [], AC_MSG_ERROR([srptools requires libpthread.])) AC_CHECK_LIB([rt], [clock_gettime], [], AC_MSG_ERROR([srptools requires librt.])) # Checks for header files. AC_HEADER_DIRENT AC_HEADER_STDC AC_CHECK_HEADERS(fcntl.h netinet/in.h stdint.h stdlib.h string.h sys/ioctl.h dnl sys/time.h unistd.h valgrind/drd.h) # Checks for typedefs, structures, and compiler characteristics. AC_C_CONST AC_C_INLINE AC_TYPE_SIZE_T # Checks for library functions. AC_FUNC_CLOSEDIR_VOID AC_PROG_GCC_TRADITIONAL AC_FUNC_MALLOC AC_FUNC_MEMCMP AC_CHECK_FUNCS([memset strdup strndup strtol strtoull]) AC_CONFIG_FILES(Makefile) AC_OUTPUT(srptools.spec srp_daemon/srpd) srptools-1.0.2/NEWS0000644000175000001440000000003112256536330011012 000000000000000.9.0 - Initial release. srptools-1.0.2/srp_daemon/0000755000175000001440000000000012301664041012520 500000000000000srptools-1.0.2/srp_daemon/srp_daemon.c0000644000175000001440000015603012301604336014741 00000000000000/* * srp_daemon - discover SRP targets over IB * Copyright (c) 2005 Topspin Communications. All rights reserved. * Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. * Copyright (c) 2006 Mellanox Technologies Ltd. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the * OpenIB.org BSD license below: * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. * * $Author: ishai Rabinovitz [ishai@mellanox.co.il]$ * Based on Roland Dreier's initial code [rdreier@cisco.com] * */ #define _GNU_SOURCE #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "srp_ib_types.h" #include "srp_daemon.h" #define IBDEV_STR_SIZE 16 #define IBPORT_STR_SIZE 16 #define IGNORE(value) do { if (value) { } } while (0) #define max_t(type, x, y) ({ \ type __max1 = (x); \ type __max2 = (y); \ __max1 > __max2 ? __max1: __max2; }) #define get_data_ptr(mad) ((void *) ((mad).hdr.data)) enum log_dest { log_to_syslog, log_to_stderr }; static int get_lid(struct umad_resources *umad_res, ib_gid_t *gid, uint16_t *lid); static const int node_table_response_size = 1 << 18; static char *sysfs_path = "/sys"; static enum log_dest s_log_dest = log_to_syslog; static int received_signal, wakeup_pipe[2] = { -1, -1 }; void wake_up_main_loop(void) { int res; assert(wakeup_pipe[1] >= 0); res = write(wakeup_pipe[1], ".", 1); IGNORE(res); } static void signal_handler(int signo) { received_signal = signo; wake_up_main_loop(); } static int check_process_uniqueness(struct config_t *conf) { char path[256]; int fd; snprintf(path, sizeof(path), "/var/tmp/srp_daemon_%s_%d", conf->dev_name, conf->port_num); if ((fd = open(path, O_CREAT|O_RDWR, S_IRUSR|S_IRGRP|S_IROTH|S_IWUSR)) < 0) { pr_err("cannot open file \"%s\" (errno: %d).\n", path, errno); return -1; } fchmod(fd, S_IRUSR|S_IRGRP|S_IROTH|S_IWUSR|S_IWGRP|S_IWOTH); if (0 != lockf(fd, F_TLOCK, 0)) { pr_err("failed to lock %s (errno: %d). possibly another " "srp_daemon is locking it\n", path, errno); close(fd); fd = -1; } return fd; } int srpd_sys_read_string(const char *dir_name, const char *file_name, char *str, int max_len) { char path[256], *s; int fd, r; snprintf(path, sizeof(path), "%s/%s", dir_name, file_name); if ((fd = open(path, O_RDONLY)) < 0) return (errno > 0) ? -errno : errno; if ((r = read(fd, str, max_len)) < 0) { int e = errno; close(fd); return (e > 0) ? -e : e; } str[(r < max_len) ? r : max_len - 1] = 0; if ((s = strrchr(str, '\n'))) *s = 0; close(fd); return 0; } int srpd_sys_read_gid(char *dir_name, char *file_name, uint8_t *gid) { char buf[64], *str, *s; uint16_t *ugid = (uint16_t *)gid; int r, i; if ((r = srpd_sys_read_string(dir_name, file_name, buf, sizeof(buf))) < 0) return r; for (s = buf, i = 0 ; i < 8; i++) { if (!(str = strsep(&s, ": \t\n"))) return -EINVAL; ugid[i] = htons(strtoul(str, 0, 16) & 0xffff); } return 0; } int srpd_sys_read_uint64(char *dir_name, char *file_name, uint64_t *u) { char buf[32]; int r; if ((r = srpd_sys_read_string(dir_name, file_name, buf, sizeof(buf))) < 0) return r; *u = strtoull(buf, 0, 0); return 0; } static void usage(const char *argv0) { fprintf(stderr, "Usage: %s [-vVcaeon] [-d | -i [-p ]] [-t ] [-r ] [-R ] [-f \n", argv0); fprintf(stderr, "-v Verbose\n"); fprintf(stderr, "-V debug Verbose\n"); fprintf(stderr, "-c prints connection Commands\n"); fprintf(stderr, "-a show All - prints also targets that are already connected\n"); fprintf(stderr, "-e Executes connection commands\n"); fprintf(stderr, "-o runs only Once and stop\n"); fprintf(stderr, "-d use umad Device \n"); fprintf(stderr, "-i use InfiniBand device \n"); fprintf(stderr, "-p use Port num \n"); fprintf(stderr, "-R perform complete Rescan every seconds\n"); fprintf(stderr, "-T Retries to connect to existing target after Timeout of seconds\n"); fprintf(stderr, "-l Transport retry count before failing IO. should be in range [2..7], (default 2)\n"); fprintf(stderr, "-f use rules File to set to which target(s) to connect (default: /etc/srp_daemon.conf\n"); fprintf(stderr, "-t Timeout for mad response in milliseconds\n"); fprintf(stderr, "-r number of send Retries for each mad\n"); fprintf(stderr, "-n New connection command format - use also initiator extension\n"); fprintf(stderr, "\nExample: srp_daemon -e -n -i mthca0 -p 1 -R 60\n"); } static int check_equal_uint64(char *dir_name, char *attr, uint64_t val) { uint64_t attr_value; if (srpd_sys_read_uint64(dir_name, attr, &attr_value)) return 0; return attr_value == val; } static int check_equal_uint16(char *dir_name, char *attr, uint16_t val) { uint64_t attr_value; if (srpd_sys_read_uint64(dir_name, attr, &attr_value)) return 0; return val == (attr_value & 0xffff); } static int recalc(struct resources *res); void pr_cmd(char *target_str, int not_connected) { int ret; if (config->cmd) printf("%s\n", target_str); if (config->execute && not_connected) { int fd = open(config->add_target_file, O_WRONLY); if (fd < 0) { pr_err("unable to open %s, maybe ib_srp is not loaded\n", config->add_target_file); return; } ret = write(fd, target_str, strlen(target_str)); pr_debug("Adding target returned %d\n", ret); close(fd); } } void pr_err(const char *fmt, ...) { va_list args; int pos; char str[1000]; va_start(args, fmt); pos = vsnprintf(str, sizeof(str), fmt, args); va_end(args); if (pos >= sizeof(str)) str[sizeof(str) - 1] = '\0'; switch (s_log_dest) { case log_to_syslog: syslog(LOG_DAEMON | LOG_ERR, "%s", str); break; case log_to_stderr: fprintf(stderr, "%s", str); break; } } static int check_not_equal_str(char *dir_name, char *attr, char *value) { const int MAX_ATTR_STRING_LENGTH=64; char attr_value[MAX_ATTR_STRING_LENGTH]; int len = strlen(value); if (len > MAX_ATTR_STRING_LENGTH) { pr_err("string %s is too long\n", value); return 1; } if (srpd_sys_read_string(dir_name, attr, attr_value, MAX_ATTR_STRING_LENGTH)) return 0; if (strncmp(attr_value, value, len)) return 1; return 0; } static int check_not_equal_int(char *dir_name, char *attr, int value) { const int MAX_ATTR_STRING_LENGTH=64; char attr_value[MAX_ATTR_STRING_LENGTH]; if (srpd_sys_read_string(dir_name, attr, attr_value, MAX_ATTR_STRING_LENGTH)) return 0; if (value != atoi(attr_value)) return 1; return 0; } int is_enabled_by_rules_file(struct target_details *target) { int rule; struct config_t *conf = config; if (NULL == conf->rules) return 1; pr_debug("Found an SRP target with id_ext %s - check if it allowed by rules file\n", target->id_ext); rule = -1; do { rule++; if (conf->rules[rule].id_ext[0] != '\0' && strtoull(target->id_ext, 0, 16) != strtoull(conf->rules[rule].id_ext, 0, 16)) continue; if (conf->rules[rule].ioc_guid[0] != '\0' && ntohll(target->ioc_prof.guid) != strtoull(conf->rules[rule].ioc_guid, 0, 16)) continue; if (conf->rules[rule].dgid[0] != '\0') { char tmp = conf->rules[rule].dgid[16]; conf->rules[rule].dgid[16] = '\0'; if (strtoull(conf->rules[rule].dgid, 0, 16) != target->subnet_prefix) { conf->rules[rule].dgid[16] = tmp; continue; } conf->rules[rule].dgid[16] = tmp; if (strtoull(&conf->rules[rule].dgid[16], 0, 16) != target->h_guid) continue; } if (conf->rules[rule].service_id[0] != '\0' && strtoull(conf->rules[rule].service_id, 0, 16) != target->h_service_id) continue; if (conf->rules[rule].pkey[0] != '\0' && (uint16_t)strtoul(conf->rules[rule].pkey, 0, 16) != target->pkey) continue; target->options = conf->rules[rule].options; return conf->rules[rule].allow; } while (1); } static int add_non_exist_target(struct target_details *target) { const int MAX_SCSI_HOST_DIR_NAME_LENGTH = 50; char scsi_host_dir[MAX_SCSI_HOST_DIR_NAME_LENGTH]; DIR *dir; struct dirent *subdir; char *subdir_name_ptr; int prefix_len; uint8_t dgid_val[16]; const int MAX_TARGET_CONFIG_STR_STRING = 255; char target_config_str[MAX_TARGET_CONFIG_STR_STRING]; int len; int not_connected = 1; pr_debug("Found an SRP target with id_ext %s - check if it is already connected\n", target->id_ext); strcpy(scsi_host_dir, "/sys/class/scsi_host/"); dir=opendir(scsi_host_dir); if (!dir) { perror("opendir - /sys/class/scsi_host/"); return -1; } prefix_len = strlen(scsi_host_dir); subdir_name_ptr = scsi_host_dir + prefix_len; subdir = (void *) 1; /* Dummy value to enter the loop */ while (subdir) { subdir = readdir(dir); if (!subdir) continue; if (subdir->d_name[0] == '.') continue; strncpy(subdir_name_ptr, subdir->d_name, MAX_SCSI_HOST_DIR_NAME_LENGTH - prefix_len); if (!check_equal_uint64(scsi_host_dir, "id_ext", strtoull(target->id_ext, 0, 16))) continue; if (!check_equal_uint16(scsi_host_dir, "pkey", target->pkey) && !config->execute) continue; if (!check_equal_uint64(scsi_host_dir, "service_id", target->h_service_id)) continue; if (!check_equal_uint64(scsi_host_dir, "ioc_guid", ntohll(target->ioc_prof.guid))) continue; if (srpd_sys_read_gid(scsi_host_dir, "orig_dgid", dgid_val)) { /* * In case this is an old kernel that does not have * orig_dgid in sysfs, use dgid instead (this is * problematic when there is a dgid redirection * by the CM) */ if (srpd_sys_read_gid(scsi_host_dir, "dgid", dgid_val)) continue; } if (htonll(target->subnet_prefix) != *((uint64_t *) dgid_val)) continue; if (htonll(target->h_guid) != *((uint64_t *) (dgid_val+8))) continue; /* If there is no local_ib_device in the scsi host dir (old kernel module), assumes it is equal */ if (check_not_equal_str(scsi_host_dir, "local_ib_device", config->dev_name)) continue; /* If there is no local_ib_port in the scsi host dir (old kernel module), assumes it is equal */ if (check_not_equal_int(scsi_host_dir, "local_ib_port", config->port_num)) continue; /* there is a match - this target is already connected */ /* There is a rare possibility of a race in the following scenario: a. A link goes down, b. ib_srp decide to remove the corresponding scsi_host. c. Before removing it, the link returns d. srp_daemon gets trap 64. e. srp_daemon thinks that this target is still connected (ib_srp has not removed it yet) so it does not connect to it. f. ib_srp continue to remove the scsi_host. As a result there is no connection to a target in the fabric and there will not be a new trap. To solve this race we schedule here another call to check if this target exist in the near future. */ /* If there is a need to print all we will continue to pr_cmd. not_connected is set to zero to make sure that this target will be printed but not connected. */ if (config->all) { not_connected = 0; break; } pr_debug("This target is already connected - skip\n"); closedir(dir); return 0; } len = snprintf(target_config_str, MAX_TARGET_CONFIG_STR_STRING, "id_ext=%s," "ioc_guid=%016llx," "dgid=%016llx%016llx," "pkey=%04x," "service_id=%016llx", target->id_ext, (unsigned long long) ntohll(target->ioc_prof.guid), (unsigned long long) target->subnet_prefix, (unsigned long long) target->h_guid, target->pkey, (unsigned long long) target->h_service_id); if (len >= MAX_TARGET_CONFIG_STR_STRING) { pr_err("Target config string is too long, ignoring target\n"); closedir(dir); return -1; } if (target->ioc_prof.io_class != htons(SRP_REV16A_IB_IO_CLASS)) { len += snprintf(target_config_str+len, MAX_TARGET_CONFIG_STR_STRING - len, ",io_class=%04hx", ntohs(target->ioc_prof.io_class)); if (len >= MAX_TARGET_CONFIG_STR_STRING) { pr_err("Target config string is too long, ignoring target\n"); closedir(dir); return -1; } } if (config->print_initiator_ext) { len += snprintf(target_config_str+len, MAX_TARGET_CONFIG_STR_STRING - len, ",initiator_ext=%016llx", (unsigned long long) ntohll(target->h_guid)); if (len >= MAX_TARGET_CONFIG_STR_STRING) { pr_err("Target config string is too long, ignoring target\n"); closedir(dir); return -1; } } if (config->execute && config->tl_retry_count) { len += snprintf(target_config_str + len, MAX_TARGET_CONFIG_STR_STRING - len, ",tl_retry_count=%d", config->tl_retry_count); if (len >= MAX_TARGET_CONFIG_STR_STRING) { pr_err("Target config string is too long, ignoring target\n"); closedir(dir); return -1; } } if (target->options) { len += snprintf(target_config_str+len, MAX_TARGET_CONFIG_STR_STRING - len, "%s", target->options); if (len >= MAX_TARGET_CONFIG_STR_STRING) { pr_err("Target config string is too long, ignoring target\n"); closedir(dir); return -1; } } target_config_str[len] = '\0'; pr_cmd(target_config_str, not_connected); closedir(dir); return 1; } int send_and_get(int portid, int agent, srp_ib_user_mad_t *out_mad, srp_ib_user_mad_t *in_mad, int in_mad_size) { struct srp_dm_mad *out_dm_mad = (void *) out_mad->hdr.data; struct srp_dm_mad *in_dm_mad = (void *) in_mad->hdr.data; int i, len; int in_agent; int ret; static uint32_t tid; uint32_t received_tid; for (i = 0; i < config->mad_retries; ++i) { /* Skip tid 0 because OpenSM ignores it. */ if (++tid == 0) ++tid; out_dm_mad->tid = htonll(tid); ret = umad_send(portid, agent, out_mad, MAD_BLOCK_SIZE, config->timeout, 0); if (ret < 0) { pr_err("umad_send to %u failed\n", (uint16_t) ntohs(out_mad->hdr.addr.lid)); return ret; } do { recv: len = in_mad_size ? in_mad_size : MAD_BLOCK_SIZE; in_agent = umad_recv(portid, (struct ib_user_mad *) in_mad, &len, config->timeout); if (in_agent < 0) { pr_err("umad_recv from %u failed - %d\n", (uint16_t) ntohs(out_mad->hdr.addr.lid), in_agent); return in_agent; } if (in_agent != agent) { pr_debug("umad_recv returned different agent\n"); goto recv; } ret = umad_status(in_mad); if (ret) { pr_err( "bad MAD status (%u) from lid %d\n", ret, (uint16_t) ntohs(out_mad->hdr.addr.lid)); return -ret; } received_tid = ntohll(in_dm_mad->tid); if (tid != received_tid) pr_debug("umad_recv returned different transaction id sent %d got %d\n", tid, received_tid); } while ((int32_t)(tid - received_tid) > 0); if (len > 0) return len; } return -1; } static void initialize_sysfs() { char *env; env = getenv("SYSFS_PATH"); if (env) { int len; sysfs_path = strndup(env, 256); len = strlen(sysfs_path); while (len > 0 && sysfs_path[len - 1] == '/') { --len; sysfs_path[len] = '\0'; } } } static int translate_umad_to_ibdev_and_port(char *umad_dev, char **ibdev, char **ibport) { char *class_dev_path; char *umad_dev_name; int ret; umad_dev_name = rindex(umad_dev, '/'); if (!umad_dev_name) { pr_err("Couldn't find device name in '%s'\n", umad_dev_name); return -1; } ret = asprintf(&class_dev_path, "%s/class/infiniband_mad/%s", sysfs_path, umad_dev_name); if (ret < 0) { pr_err("out of memory\n"); return -ENOMEM; } *ibdev = malloc(IBDEV_STR_SIZE); if (!*ibdev) { pr_err("out of memory\n"); ret = -ENOMEM; goto end; } if (srpd_sys_read_string(class_dev_path, "ibdev", *ibdev, IBDEV_STR_SIZE) < 0) { pr_err("Couldn't read ibdev attribute\n"); ret = -1; goto end; } *ibport = malloc(IBPORT_STR_SIZE); if (!*ibport) { pr_err("out of memory\n"); ret = -ENOMEM; goto end; } if (srpd_sys_read_string(class_dev_path, "port", *ibport, IBPORT_STR_SIZE) < 0) { pr_err("Couldn't read port attribute\n"); ret = -1; goto end; } ret = 0; end: free(class_dev_path); return ret; } static void init_srp_mad(srp_ib_user_mad_t *out_umad, int agent, uint16_t h_dlid, uint16_t h_attr_id, uint32_t h_attr_mod) { struct srp_dm_mad *out_mad; memset(out_umad, 0, sizeof *out_umad); out_umad->hdr.agent_id = agent; out_umad->hdr.addr.qpn = htonl(1); out_umad->hdr.addr.qkey = htonl(0x80010000); out_umad->hdr.addr.lid = htons(h_dlid); out_mad = (void *) out_umad->hdr.data; out_mad->base_version = 1; out_mad->method = SRP_MAD_METHOD_GET; out_mad->attr_id = htons(h_attr_id); out_mad->attr_mod = htonl(h_attr_mod); } static void init_srp_dm_mad(srp_ib_user_mad_t *out_mad, int agent, uint16_t h_dlid, uint16_t h_attr_id, uint32_t h_attr_mod) { ib_sa_mad_t *out_dm_mad = get_data_ptr(*out_mad); init_srp_mad(out_mad, agent, h_dlid, h_attr_id, h_attr_mod); out_dm_mad->mgmt_class = SRP_MGMT_CLASS_DM; out_dm_mad->class_ver = 1; } static void init_srp_sa_mad(srp_ib_user_mad_t *out_mad, int agent, uint16_t h_dlid, uint16_t h_attr_id, uint32_t h_attr_mod) { ib_sa_mad_t *out_sa_mad = get_data_ptr(*out_mad); init_srp_mad(out_mad, agent, h_dlid, h_attr_id, h_attr_mod); out_sa_mad->mgmt_class = SRP_MGMT_CLASS_SA; out_sa_mad->class_ver = SRP_MGMT_CLASS_SA_VERSION; } static int check_sm_cap(struct umad_resources *umad_res, int *mask_match) { srp_ib_user_mad_t out_mad, in_mad; struct srp_dm_rmpp_sa_mad *in_sa_mad; struct srp_class_port_info *cpi; int ret; in_sa_mad = get_data_ptr(in_mad); init_srp_sa_mad(&out_mad, umad_res->agent, umad_res->sm_lid, SRP_MAD_ATTR_CLASS_PORT_INFO, 0); ret = send_and_get(umad_res->portid, umad_res->agent, &out_mad, &in_mad, 0); if (ret < 0) return ret; cpi = (void *) in_sa_mad->data; *mask_match = !!(ntohs(cpi->cap_mask) & SRP_SM_SUPPORTS_MASK_MATCH); return 0; } static int set_class_port_info(struct umad_resources *umad_res, uint16_t dlid) { srp_ib_user_mad_t in_mad, out_mad; struct srp_dm_mad *out_dm_mad, *in_dm_mad; struct srp_class_port_info *cpi; char val[64]; int i; init_srp_dm_mad(&out_mad, umad_res->agent, dlid, SRP_MAD_ATTR_CLASS_PORT_INFO, 0); out_dm_mad = get_data_ptr(out_mad); out_dm_mad->method = SRP_MAD_METHOD_SET; cpi = (void *) out_dm_mad->data; if (srpd_sys_read_string(umad_res->port_sysfs_path, "lid", val, sizeof val) < 0) { pr_err("Couldn't read LID\n"); return -1; } cpi->trap_lid = htons(strtol(val, NULL, 0)); if (srpd_sys_read_string(umad_res->port_sysfs_path, "gids/0", val, sizeof val) < 0) { pr_err("Couldn't read GID[0]\n"); return -1; } for (i = 0; i < 8; ++i) ((uint16_t *) cpi->trap_gid)[i] = htons(strtol(val + i * 5, NULL, 16)); if (send_and_get(umad_res->portid, umad_res->agent, &out_mad, &in_mad, 0) < 0) return -1; in_dm_mad = get_data_ptr(in_mad); if (in_dm_mad->status) { pr_err("Class Port Info set returned status 0x%04x\n", ntohs(in_dm_mad->status)); return -1; } return 0; } static int get_iou_info(struct umad_resources *umad_res, uint16_t dlid, struct srp_dm_iou_info *iou_info) { srp_ib_user_mad_t in_mad, out_mad; struct srp_dm_mad *in_dm_mad; init_srp_dm_mad(&out_mad, umad_res->agent, dlid, SRP_DM_ATTR_IO_UNIT_INFO, 0); if (send_and_get(umad_res->portid, umad_res->agent, &out_mad, &in_mad, 0) < 0) return -1; in_dm_mad = get_data_ptr(in_mad); if (in_dm_mad->status) { pr_err("IO Unit Info query returned status 0x%04x\n", ntohs(in_dm_mad->status)); return -1; } memcpy(iou_info, in_dm_mad->data, sizeof *iou_info); /* pr_debug("iou_info->max_controllers is %d\n", iou_info->max_controllers); */ return 0; } static int get_ioc_prof(struct umad_resources *umad_res, uint16_t h_dlid, int ioc, struct srp_dm_ioc_prof *ioc_prof) { srp_ib_user_mad_t in_mad, out_mad; struct srp_dm_mad *in_dm_mad; init_srp_dm_mad(&out_mad, umad_res->agent, h_dlid, SRP_DM_ATTR_IO_CONTROLLER_PROFILE, ioc); if (send_and_get(umad_res->portid, umad_res->agent, &out_mad, &in_mad, 0) < 0) return -1; in_dm_mad = get_data_ptr(in_mad); if (in_dm_mad->status) { pr_err("IO Controller Profile query returned status 0x%04x for %d\n", ntohs(in_dm_mad->status), ioc); return -1; } memcpy(ioc_prof, in_dm_mad->data, sizeof *ioc_prof); return 0; } static int get_svc_entries(struct umad_resources *umad_res, uint16_t dlid, int ioc, int start, int end, struct srp_dm_svc_entries *svc_entries) { srp_ib_user_mad_t in_mad, out_mad; struct srp_dm_mad *in_dm_mad; init_srp_dm_mad(&out_mad, umad_res->agent, dlid, SRP_DM_ATTR_SERVICE_ENTRIES, (ioc << 16) | (end << 8) | start); if (send_and_get(umad_res->portid, umad_res->agent, &out_mad, &in_mad, 0) < 0) return -1; in_dm_mad = get_data_ptr(in_mad); if (in_dm_mad->status) { pr_err("Service Entries query returned status 0x%04x\n", ntohs(in_dm_mad->status)); return -1; } memcpy(svc_entries, in_dm_mad->data, sizeof *svc_entries); return 0; } static int do_port(struct resources *res, uint16_t pkey, uint16_t dlid, uint64_t subnet_prefix, uint64_t h_guid) { struct umad_resources *umad_res = res->umad_res; struct srp_dm_iou_info iou_info; struct srp_dm_svc_entries svc_entries; int i, j, k, ret; static const uint64_t topspin_oui = 0x0005ad0000000000ull; static const uint64_t oui_mask = 0xffffff0000000000ull; struct target_details *target = (struct target_details *) malloc(sizeof(struct target_details)); target->subnet_prefix = subnet_prefix; target->h_guid = h_guid; target->options = NULL; pr_debug("enter do_port\n"); if ((target->h_guid & oui_mask) == topspin_oui && set_class_port_info(umad_res, dlid)) pr_err("Warning: set of ClassPortInfo failed\n"); ret = get_iou_info(umad_res, dlid, &iou_info); if (ret < 0) { pr_err("failed to get iou info for dlid %x\n", dlid); goto out; } pr_human("IO Unit Info:\n"); pr_human(" port LID: %04x\n", dlid); pr_human(" port GID: %016llx%016llx\n", (unsigned long long) target->subnet_prefix, (unsigned long long) target->h_guid); pr_human(" change ID: %04x\n", ntohs(iou_info.change_id)); pr_human(" max controllers: 0x%02x\n", iou_info.max_controllers); if (config->verbose > 0) for (i = 0; i < iou_info.max_controllers; ++i) { pr_human(" controller[%3d]: ", i + 1); switch ((iou_info.controller_list[i / 2] >> (4 * (1 - i % 2))) & 0xf) { case SRP_DM_NO_IOC: pr_human("not installed\n"); break; case SRP_DM_IOC_PRESENT: pr_human("present\n"); break; case SRP_DM_NO_SLOT: pr_human("no slot\n"); break; default: pr_human("\n"); break; } } for (i = 0; i < iou_info.max_controllers; ++i) { if (((iou_info.controller_list[i / 2] >> (4 * (1 - i % 2))) & 0xf) == SRP_DM_IOC_PRESENT) { pr_human("\n"); if (get_ioc_prof(umad_res, dlid, i + 1, &target->ioc_prof)) continue; pr_human(" controller[%3d]\n", i + 1); pr_human(" GUID: %016llx\n", (unsigned long long) ntohll(target->ioc_prof.guid)); pr_human(" vendor ID: %06x\n", ntohl(target->ioc_prof.vendor_id) >> 8); pr_human(" device ID: %06x\n", ntohl(target->ioc_prof.device_id)); pr_human(" IO class : %04hx\n", ntohs(target->ioc_prof.io_class)); pr_human(" ID: %s\n", target->ioc_prof.id); pr_human(" service entries: %d\n", target->ioc_prof.service_entries); for (j = 0; j < target->ioc_prof.service_entries; j += 4) { int n; n = j + 3; if (n >= target->ioc_prof.service_entries) n = target->ioc_prof.service_entries - 1; if (get_svc_entries(umad_res, dlid, i + 1, j, n, &svc_entries)) continue; for (k = 0; k <= n - j; ++k) { if (sscanf(svc_entries.service[k].name, "SRP.T10:%16s", target->id_ext) != 1) continue; pr_human(" service[%3d]: %016llx / %s\n", j + k, (unsigned long long) ntohll(svc_entries.service[k].id), svc_entries.service[k].name); target->h_service_id = ntohll(svc_entries.service[k].id); target->pkey = pkey; if (is_enabled_by_rules_file(target)) { if (!add_non_exist_target(target) && !config->once) { target->retry_time = time(NULL) + config->retry_timeout; push_to_retry_list(res->sync_res, target); } } } } } } pr_human("\n"); out: free(target); return ret; } int get_node(struct umad_resources *umad_res, uint16_t dlid, uint64_t *guid) { srp_ib_user_mad_t out_mad, in_mad; struct srp_dm_rmpp_sa_mad *out_sa_mad, *in_sa_mad; struct srp_sa_node_rec *node; in_sa_mad = get_data_ptr(in_mad); out_sa_mad = get_data_ptr(out_mad); init_srp_sa_mad(&out_mad, umad_res->agent, umad_res->sm_lid, SRP_SA_ATTR_NODE, 0); out_sa_mad->comp_mask = htonll(1); /* LID */ node = (void *) out_sa_mad->data; node->lid = htons(dlid); if (send_and_get(umad_res->portid, umad_res->agent, &out_mad, &in_mad, 0) < 0) return -1; node = (void *) in_sa_mad->data; *guid = ntohll(node->port_guid); return 0; } static int get_port_info(struct umad_resources *umad_res, uint16_t dlid, uint64_t *subnet_prefix, int *isdm) { srp_ib_user_mad_t out_mad, in_mad; struct srp_dm_rmpp_sa_mad *out_sa_mad, *in_sa_mad; struct srp_sa_port_info_rec *port_info; in_sa_mad = get_data_ptr(in_mad); out_sa_mad = get_data_ptr(out_mad); init_srp_sa_mad(&out_mad, umad_res->agent, umad_res->sm_lid, SRP_SA_ATTR_PORT_INFO, 0); out_sa_mad->comp_mask = htonll(1); /* LID */ port_info = (void *) out_sa_mad->data; port_info->endport_lid = htons(dlid); if (send_and_get(umad_res->portid, umad_res->agent, &out_mad, &in_mad, 0) < 0) return -1; port_info = (void *) in_sa_mad->data; *subnet_prefix = ntohll(port_info->subnet_prefix); *isdm = !!(ntohl(port_info->capability_mask) & SRP_IS_DM); return 0; } int pkey_index_to_pkey(struct umad_resources *umad_res, int pkey_index, uint16_t *pkey) { char pkey_file[16], pkey_str[16]; /* Read pkey */ snprintf(pkey_file, sizeof(pkey_file), "pkeys/%d", pkey_index); if (srpd_sys_read_string(umad_res->port_sysfs_path, pkey_file, pkey_str, sizeof(pkey_str)) < 0) return -1; *pkey = strtoul(pkey_str, NULL, 0); if (*pkey) pr_debug("discover Targets for P_key %04x (index %d)\n", *pkey, pkey_index); return 0; } static int get_shared_pkeys(struct resources *res, uint16_t dest_port_lid, uint16_t *pkeys) { struct umad_resources *umad_res = res->umad_res; uint8_t *in_mad_buf; srp_ib_user_mad_t out_mad; struct ib_user_mad *in_mad; struct srp_dm_rmpp_sa_mad *out_sa_mad, *in_sa_mad; ib_path_rec_t *path_rec; ssize_t len; int size; int i, num_pkeys = 0; uint16_t pkey; uint16_t local_port_lid = get_port_lid(res->ud_res->ib_ctx, config->port_num); in_mad_buf = malloc(sizeof(struct ib_user_mad) + node_table_response_size); if (!in_mad_buf) return -ENOMEM; in_mad = (void *)in_mad_buf; in_sa_mad = (void *)in_mad->data; out_sa_mad = get_data_ptr(out_mad); init_srp_sa_mad(&out_mad, umad_res->agent, umad_res->sm_lid, SRP_SA_ATTR_PATH_REC, 0); /** * Due to OpenSM bug (issue #335016) SM won't return * table of all shared P_Keys, it will return only the first * shared P_Key, So we send path_rec over each P_Key in the P_Key * table. SM will return path record if P_Key is shared or else None. * Once SM bug will be fixed, this loop should be removed. **/ for (i = 0; ; i++) { if (pkey_index_to_pkey(umad_res, i, &pkey)) break; if (!pkey) continue; /* Mark components: DLID, SLID, PKEY */ out_sa_mad->comp_mask = htonll(1 << 4 | 1 << 5 | 1 << 13); out_sa_mad->rmpp_version = 1; out_sa_mad->rmpp_type = 1; path_rec = (ib_path_rec_t *)out_sa_mad->data; path_rec->slid = htons(local_port_lid); path_rec->dlid = htons(dest_port_lid); path_rec->pkey = htons(pkey); len = send_and_get(umad_res->portid, umad_res->agent, &out_mad, (srp_ib_user_mad_t *)in_mad, node_table_response_size); if (len < 0) goto err; size = ib_get_attr_size(in_sa_mad->attr_offset); if (!size) { if (config->verbose) printf("PathRec Query did not find any targets " "over P_Key %x\n", pkey); continue; } path_rec = (ib_path_rec_t *)in_sa_mad->data; pkeys[num_pkeys++] = ntohs(path_rec->pkey); } free(in_mad_buf); return num_pkeys; err: free(in_mad_buf); return -1; } static int do_dm_port_list(struct resources *res) { struct umad_resources *umad_res = res->umad_res; uint8_t *in_mad_buf; srp_ib_user_mad_t out_mad; struct ib_user_mad *in_mad; struct srp_dm_rmpp_sa_mad *out_sa_mad, *in_sa_mad; struct srp_sa_port_info_rec *port_info; ssize_t len; int size; int i, j,num_pkeys; uint16_t pkeys[SRP_MAX_SHARED_PKEYS]; uint64_t guid; in_mad_buf = malloc(sizeof(struct ib_user_mad) + node_table_response_size); if (!in_mad_buf) return -ENOMEM; in_mad = (void *) in_mad_buf; in_sa_mad = (void *) in_mad->data; out_sa_mad = get_data_ptr(out_mad); init_srp_sa_mad(&out_mad, umad_res->agent, umad_res->sm_lid, SRP_SA_ATTR_PORT_INFO, SRP_SM_CAP_MASK_MATCH_ATTR_MOD); out_sa_mad->method = SRP_SA_METHOD_GET_TABLE; out_sa_mad->comp_mask = htonll(1 << 7); /* Capability mask */ out_sa_mad->rmpp_version = 1; out_sa_mad->rmpp_type = 1; port_info = (void *) out_sa_mad->data; port_info->capability_mask = htonl(SRP_IS_DM); /* IsDM */ len = send_and_get(umad_res->portid, umad_res->agent, &out_mad, (srp_ib_user_mad_t *) in_mad, node_table_response_size); if (len < 0) { free(in_mad_buf); return len; } size = ib_get_attr_size(in_sa_mad->attr_offset); if (!size) { if (config->verbose) { printf("Query did not find any targets\n"); } free(in_mad_buf); return 0; } for (i = 0; (i + 1) * size <= len - MAD_RMPP_HDR_SIZE; ++i) { port_info = (void *) in_sa_mad->data + i * size; if (get_node(umad_res, ntohs(port_info->endport_lid), &guid)) continue; num_pkeys = get_shared_pkeys(res, ntohs(port_info->endport_lid), pkeys); if (num_pkeys < 0) { pr_err("failed to get shared P_Keys with LID %x\n", ntohs(port_info->endport_lid)); free(in_mad_buf); return num_pkeys; } for (j = 0; j < num_pkeys; ++j) do_port(res, pkeys[j], ntohs(port_info->endport_lid), ntohll(port_info->subnet_prefix), guid); } free(in_mad_buf); return 0; } void handle_port(struct resources *res, uint16_t pkey, uint16_t lid, uint64_t h_guid) { struct umad_resources *umad_res = res->umad_res; uint64_t subnet_prefix; int isdm; pr_debug("enter handle_port for lid %d\n", lid); if (get_port_info(umad_res, lid, &subnet_prefix, &isdm)) return; if (!isdm) return; do_port(res, pkey, lid, subnet_prefix, h_guid); } static int do_full_port_list(struct resources *res) { struct umad_resources *umad_res = res->umad_res; uint8_t *in_mad_buf; srp_ib_user_mad_t out_mad; struct ib_user_mad *in_mad; struct srp_dm_rmpp_sa_mad *out_sa_mad, *in_sa_mad; struct srp_sa_node_rec *node; ssize_t len; int size; int i, j, num_pkeys; uint16_t pkeys[SRP_MAX_SHARED_PKEYS]; in_mad_buf = malloc(sizeof(struct ib_user_mad) + node_table_response_size); if (!in_mad_buf) return -ENOMEM; in_mad = (void *) in_mad_buf; in_sa_mad = (void *) in_mad->data; out_sa_mad = get_data_ptr(out_mad); init_srp_sa_mad(&out_mad, umad_res->agent, umad_res->sm_lid, SRP_SA_ATTR_NODE, 0); out_sa_mad->method = SRP_SA_METHOD_GET_TABLE; out_sa_mad->comp_mask = 0; /* Get all end ports */ out_sa_mad->rmpp_version = 1; out_sa_mad->rmpp_type = 1; len = send_and_get(umad_res->portid, umad_res->agent, &out_mad, (srp_ib_user_mad_t *) in_mad, node_table_response_size); if (len < 0) { free(in_mad_buf); return len; } size = ntohs(in_sa_mad->attr_offset) * 8; for (i = 0; (i + 1) * size <= len - MAD_RMPP_HDR_SIZE; ++i) { node = (void *) in_sa_mad->data + i * size; num_pkeys = get_shared_pkeys(res, ntohs(node->lid), pkeys); if (num_pkeys < 0) { pr_err("failed to get shared P_Keys with LID %x\n", ntohs(node->lid)); free(in_mad_buf); return num_pkeys; } for (j = 0; j < num_pkeys; ++j) (void) handle_port(res, pkeys[j], ntohs(node->lid), ntohll(node->port_guid)); } free(in_mad_buf); return 0; } struct config_t *config; static void print_config(struct config_t *conf) { printf(" configuration report\n"); printf(" ------------------------------------------------\n"); printf(" Current pid : %u\n", getpid()); printf(" Device name : \"%s\"\n", conf->dev_name); printf(" IB port : %u\n", conf->port_num); printf(" Mad Retries : %d\n", conf->mad_retries); printf(" Number of outstanding WR : %u\n", conf->num_of_oust); printf(" Mad timeout (msec) : %u\n", conf->timeout); printf(" Prints add target command : %d\n", conf->cmd); printf(" Executes add target command : %d\n", conf->execute); printf(" Print also connected targets : %d\n", conf->all); printf(" Report current targets and stop : %d\n", conf->once); if (conf->rules_file) printf(" Reads rules from : %s\n", conf->rules_file); if (conf->print_initiator_ext) printf(" Print initiator_ext\n"); else printf(" Do not print initiator_ext\n"); if (conf->recalc_time) printf(" Performs full target rescan every %d seconds\n", conf->recalc_time); else printf(" No full target rescan\n"); if (conf->retry_timeout) printf(" Retries to connect to existing target after %d seconds\n", conf->retry_timeout); else printf(" Do not retry to connect to existing targets\n"); printf(" ------------------------------------------------\n"); } static char *copy_till_comma(char *d, char *s, int len, int base) { int i=0; while (strchr(", \t\n", *s) == NULL) { if (i == len) return NULL; if ((base == 16 && isxdigit(*s)) || (base == 10 && isdigit(*s))) { *d=*s; ++d; ++s; ++i; } else return NULL; } *d='\0'; if (*s == '\n') return s; ++s; return s; } static char *parse_main_option(struct rule *rule, char *ptr) { struct option_info { const char *name; size_t offset; size_t len; int base; }; #define OPTION_INFO(n, base) { #n "=", offsetof(struct rule, n), \ sizeof(((struct rule *)NULL)->n), base} static const struct option_info opt_info[] = { OPTION_INFO(id_ext, 16), OPTION_INFO(ioc_guid, 16), OPTION_INFO(dgid, 16), OPTION_INFO(service_id, 16), OPTION_INFO(pkey, 16), }; int i, optnamelen; char *ptr2 = NULL; for (i = 0; i < sizeof(opt_info) / sizeof(opt_info[0]); i++) { optnamelen = strlen(opt_info[i].name); if (strncmp(ptr, opt_info[i].name, optnamelen) == 0) { ptr2 = copy_till_comma((char *)rule + opt_info[i].offset, ptr + optnamelen, opt_info[i].len - 1, opt_info[i].base); break; } } return ptr2; } /* * Return values: * -1 if the output buffer is not large enough. * 0 if an unsupported option has been encountered. * > 0 if parsing succeeded. */ static int parse_other_option(struct rule *rule, char *ptr) { static const char *const opt[] = { "comp_vector=", "max_cmd_per_lun=", "max_sect=", "queue_size=", "tl_retry_count=", }; char *ptr2 = NULL, *optr, option[17]; int i, optnamelen, len, left; optr = rule->options; left = sizeof(rule->options); len = strlen(optr); optr += len; left -= len; for (i = 0; i < sizeof(opt)/sizeof(opt[0]); ++i) { optnamelen = strlen(opt[i]); if (strncmp(ptr, opt[i], optnamelen) != 0) continue; ptr2 = copy_till_comma(option, ptr + optnamelen, sizeof(option) - 1, 10); if (!ptr2) return -1; len = snprintf(optr, left, ",%s%s", opt[i], option); optr += len; left -= len; if (left <= 0) return -1; break; } return ptr2 ? ptr2 - ptr : 0; } static int get_rules_file(struct config_t *conf) { int line_number = 1, len, line_number_for_output, ret = -1; char line[255]; char *ptr, *ptr2; struct rule *rule; FILE *infile = fopen(conf->rules_file, "r"); if (infile == NULL) { pr_debug("Could not find rules file %s, going with default\n", conf->rules_file); return 0; } while (fgets(line, sizeof(line), infile) != NULL) { if (line[0] != '#' && line[0] != '\n') line_number++; } if (fseek(infile, 0L, SEEK_SET) != 0) { pr_err("internal error while seeking %s\n", conf->rules_file); goto out; } conf->rules = malloc(sizeof(struct rule) * line_number); rule = &conf->rules[0] - 1; line_number_for_output = 0; while (fgets(line, sizeof(line), infile) != NULL) { line_number_for_output++; if (line[0] == '#' || line[0] == '\n') continue; rule++; switch (line[0]) { case 'a': case 'A': rule->allow = 1; break; case 'd': case 'D': rule->allow = 0; break; default: pr_err("Bad syntax in rules file %s line %d:" " line should start with 'a' or 'd'\n", conf->rules_file, line_number_for_output); goto out; } rule->id_ext[0] = '\0'; rule->ioc_guid[0] = '\0'; rule->dgid[0] = '\0'; rule->service_id[0] = '\0'; rule->pkey[0] = '\0'; rule->options[0] = '\0'; ptr = &line[1]; while (*ptr == ' ' || *ptr == '\t') ptr++; while (*ptr != '\n') { ptr2 = parse_main_option(rule, ptr); if (!ptr2 && rule->allow) { len = parse_other_option(rule, ptr); if (len < 0) { pr_err("Buffer overflow triggered by" " rules file %s line %d\n", conf->rules_file, line_number_for_output); goto out; } ptr2 = len ? ptr + len : NULL; } if (ptr2 == NULL) { pr_err("Bad syntax in rules file %s line %d\n", conf->rules_file, line_number_for_output); goto out; } ptr = ptr2; while (*ptr == ' ' || *ptr == '\t') ptr++; } } rule++; rule->id_ext[0] = '\0'; rule->ioc_guid[0] = '\0'; rule->dgid[0] = '\0'; rule->service_id[0] = '\0'; rule->pkey[0] = '\0'; rule->options[0] = '\0'; rule->allow = 1; ret = 0; out: fclose(infile); return ret; } static int get_config(struct config_t *conf, int argc, char *argv[]) { /* set defaults */ char* umad_dev = "/dev/infiniband/umad0"; char *ibport; int ret; conf->port_num = 1; conf->num_of_oust = 10; conf->dev_name = NULL; conf->cmd = 0; conf->once = 0; conf->execute = 0; conf->all = 0; conf->verbose = 0; conf->debug_verbose = 0; conf->timeout = 5000; conf->mad_retries = 3; conf->recalc_time = 0; conf->retry_timeout = 20; conf->add_target_file = NULL; conf->print_initiator_ext = 0; conf->rules_file = "/etc/srp_daemon.conf"; conf->rules = NULL; conf->tl_retry_count = 0; while (1) { int c; c = getopt(argc, argv, "caveod:i:p:t:r:R:T:l:Vhnf:"); if (c == -1) break; switch (c) { case 'd': umad_dev = optarg; break; case 'i': conf->dev_name = strdup(optarg); if (!conf->dev_name) { pr_err("Fail to alloc space for dev_name\n"); return -ENOMEM; } break; case 'p': conf->port_num = atoi(optarg); if (conf->port_num == 0) { pr_err("Bad port number %s\n", optarg); return -1; } break; case 'c': ++conf->cmd; break; case 'o': ++conf->once; break; case 'a': ++conf->all; break; case 'e': ++conf->execute; break; case 'v': ++conf->verbose; break; case 'V': ++conf->debug_verbose; break; case 'n': ++conf->print_initiator_ext; break; case 't': conf->timeout = atoi(optarg); if (conf->timeout == 0) { pr_err("Bad timeout - %s\n", optarg); return -1; } break; case 'r': conf->mad_retries = atoi(optarg); if (conf->mad_retries == 0) { pr_err("Bad number of retries - %s\n", optarg); return -1; } break; case 'R': conf->recalc_time = atoi(optarg); if (conf->recalc_time == 0) { pr_err("Bad Rescan time window - %s\n", optarg); return -1; } break; case 'T': conf->retry_timeout = atoi(optarg); if (conf->retry_timeout == 0 && strcmp(optarg, "0")) { pr_err("Bad retry Timeout value- %s.\n", optarg); return -1; } break; case 'f': conf->rules_file = optarg; break; case 'l': conf->tl_retry_count = atoi(optarg); if (conf->tl_retry_count < 2 || conf->tl_retry_count > 7) { pr_err("Bad tl_retry_count argument (%d), " "must be 2 <= tl_retry_count <= 7\n", conf->tl_retry_count); return -1; } break; case 'h': default: usage(argv[0]); return -1; } } initialize_sysfs(); if (conf->dev_name == NULL) { if (translate_umad_to_ibdev_and_port(umad_dev, &conf->dev_name, &ibport)) { pr_err( "Fail to translate umad to ibdev and port\n"); return -1; } conf->port_num = atoi(ibport); if (conf->port_num == 0) { pr_err("Bad port number %s\n", ibport); free(conf->dev_name); free(ibport); return -1; } free(ibport); } ret = asprintf(&conf->add_target_file, "%s/class/infiniband_srp/srp-%s-%d/add_target", sysfs_path, conf->dev_name, conf->port_num); if (ret < 0) { pr_err("error while allocating add_target\n"); return ret; } if (get_rules_file(conf)) return -1; return 0; } static void config_destroy(struct config_t *conf) { free(conf->dev_name); free(conf->add_target_file); free(conf->rules); } static void umad_resources_init(struct umad_resources *umad_res) { umad_res->portid = -1; umad_res->agent = -1; umad_res->agent = -1; umad_res->port_sysfs_path = NULL; } static void umad_resources_destroy(struct umad_resources *umad_res) { if (umad_res->port_sysfs_path) free(umad_res->port_sysfs_path); if (umad_res->portid >= 0) { if (umad_res->agent >= 0) umad_unregister(umad_res->portid, umad_res->agent); umad_close_port(umad_res->portid); } umad_done(); } static int umad_resources_create(struct umad_resources *umad_res) { int ret; ret = asprintf(&umad_res->port_sysfs_path, "%s/class/infiniband/%s/ports/%d", sysfs_path, config->dev_name, config->port_num); if (ret < 0) { umad_res->port_sysfs_path = NULL; return -ENOMEM; } umad_res->portid = umad_open_port(config->dev_name, config->port_num); if (umad_res->portid < 0) { pr_err("umad_open_port failed for device %s port %d\n", config->dev_name, config->port_num); return -ENXIO; } umad_res->agent = umad_register(umad_res->portid, SRP_MGMT_CLASS_SA, SRP_MGMT_CLASS_SA_VERSION, SRP_SA_RMPP_VERSION, 0); if (umad_res->agent < 0) { pr_err("umad_register failed\n"); return umad_res->agent; } return 0; } void *run_thread_retry_to_connect(void *res_in) { struct resources *res = (struct resources *)res_in; struct target_details *target; time_t sleep_time; pthread_mutex_lock(&res->sync_res->retry_mutex); while (!res->sync_res->stop_threads) { if (retry_list_is_empty(res->sync_res)) pthread_cond_wait(&res->sync_res->retry_cond, &res->sync_res->retry_mutex); while ((target = pop_from_retry_list(res->sync_res))) { pthread_mutex_unlock(&res->sync_res->retry_mutex); sleep_time = target->retry_time - time(NULL); if (sleep_time > 0) srp_sleep(sleep_time, 0); add_non_exist_target(target); free(target); pthread_mutex_lock(&res->sync_res->retry_mutex); } } /* empty retry_list */ while ((target = pop_from_retry_list(res->sync_res))) free(target); pthread_mutex_unlock(&res->sync_res->retry_mutex); pr_debug("retry_to_connect thread ended\n"); pthread_exit(NULL); } static void free_res(struct resources *res) { void *status; if (!res) return; if (res->sync_res) { pthread_mutex_lock(&res->sync_res->retry_mutex); res->sync_res->stop_threads = 1; pthread_cond_signal(&res->sync_res->retry_cond); pthread_mutex_unlock(&res->sync_res->retry_mutex); } if (res->ud_res) modify_qp_to_err(res->ud_res->qp); if (res->reconnect_thread) { pthread_kill(res->reconnect_thread, SIGINT); pthread_join(res->reconnect_thread, &status); } if (res->async_ev_thread) { pthread_kill(res->async_ev_thread, SIGINT); pthread_join(res->async_ev_thread, &status); } if (res->trap_thread) { pthread_kill(res->trap_thread, SIGINT); pthread_join(res->trap_thread, &status); } if (res->sync_res) sync_resources_cleanup(res->sync_res); if (res->ud_res) ud_resources_destroy(res->ud_res); if (res->umad_res) umad_resources_destroy(res->umad_res); free(res); } static struct resources *alloc_res(void) { struct all_resources { struct resources res; struct ud_resources ud_res; struct umad_resources umad_res; struct sync_resources sync_res; }; struct all_resources *res; int ret; res = calloc(1, sizeof(*res)); if (!res) goto err; umad_resources_init(&res->umad_res); ret = umad_resources_create(&res->umad_res); if (ret) goto err; res->res.umad_res = &res->umad_res; ud_resources_init(&res->ud_res); ret = ud_resources_create(&res->ud_res); if (ret) goto err; res->res.ud_res = &res->ud_res; ret = sync_resources_init(&res->sync_res); if (ret) goto err; res->res.sync_res = &res->sync_res; if (!config->once) { ret = pthread_create(&res->res.trap_thread, NULL, run_thread_get_trap_notices, &res->res); if (ret) goto err; } ret = pthread_create(&res->res.async_ev_thread, NULL, run_thread_listen_to_events, &res->res); if (ret) goto err; if (config->retry_timeout && !config->once) { ret = pthread_create(&res->res.reconnect_thread, NULL, run_thread_retry_to_connect, &res->res); if (ret) goto err; } return &res->res; err: if (res) free_res(&res->res); return NULL; } /* *c = *a - *b. See also the BSD macro timersub(). */ static void ts_sub(const struct timespec *a, const struct timespec *b, struct timespec *res) { res->tv_sec = a->tv_sec - b->tv_sec; res->tv_nsec = a->tv_nsec - b->tv_nsec; if (res->tv_nsec < 0) { res->tv_sec--; res->tv_nsec += 1000 * 1000 * 1000; } } static int ibsrpdm(int argc, char *argv[]) { char* umad_dev = "/dev/infiniband/umad0"; char* ibport; struct resources *res; int ret; s_log_dest = log_to_stderr; config = calloc(1, sizeof(*config)); config->num_of_oust = 10; config->timeout = 5000; config->mad_retries = 3; config->all = 1; while (1) { int c; c = getopt(argc, argv, "cd:h:v"); if (c == -1) break; switch (c) { case 'c': ++config->cmd; break; case 'd': umad_dev = optarg; break; case 'v': ++config->debug_verbose; break; case 'h': default: fprintf(stderr, "Usage: %s [-vc] [-d ]\n", argv[0]); return 1; } } initialize_sysfs(); if (translate_umad_to_ibdev_and_port(umad_dev, &config->dev_name, &ibport)) { pr_err("Fail to translate umad to ibdev and port\n"); return 1; } config->port_num = atoi(ibport); free(ibport); umad_init(); res = alloc_res(); if (!res) { ret = 1; pr_err("Resource allocation failed\n"); goto umad_done; } ret = recalc(res); if (ret) pr_err("Querying SRP targets failed\n"); assert(res->sync_res); pthread_mutex_lock(&res->sync_res->retry_mutex); res->sync_res->stop_threads = 1; pthread_cond_signal(&res->sync_res->retry_cond); pthread_mutex_unlock(&res->sync_res->retry_mutex); free_res(res); umad_done: umad_done(); free(config); return ret; } int main(int argc, char *argv[]) { int ret, i, flags; struct resources *res; uint16_t lid; uint16_t pkey; ib_gid_t gid; struct target_details *target; struct sigaction sa; int subscribed = 0; int lockfd; STATIC_ASSERT(sizeof(struct srp_dm_mad) == 256); STATIC_ASSERT(sizeof(struct srp_dm_rmpp_sa_mad) == 256); STATIC_ASSERT(sizeof(struct srp_sa_node_rec) == 108); STATIC_ASSERT(sizeof(struct srp_sa_port_info_rec) == 58); STATIC_ASSERT(sizeof(struct srp_class_port_info) == 72); STATIC_ASSERT(sizeof(struct srp_dm_iou_info) == 132); STATIC_ASSERT(sizeof(struct srp_dm_ioc_prof) == 128); ret = pipe(wakeup_pipe); if (ret < 0) { pr_err("could not create pipe\n"); goto out; } for (i = 0; i < 2; i++) { flags = fcntl(wakeup_pipe[i], F_GETFL); fcntl(wakeup_pipe[i], F_SETFL, flags | O_NONBLOCK); } /* * signal_handler() may be invoked on the context of any thread. * Avoid that data race detection tools complain about this. */ ANNOTATE_BENIGN_RACE_SIZED(&received_signal, sizeof(received_signal), ""); memset(&sa, 0, sizeof(sa)); sigemptyset(&sa.sa_mask); sa.sa_handler = signal_handler; sigaction(SIGINT, &sa, 0); sigaction(SIGTERM, &sa, 0); if (strcmp(argv[0] + max_t(int, 0, strlen(argv[0]) - strlen("ibsrpdm")), "ibsrpdm") == 0) { ret = ibsrpdm(argc, argv); goto close_pipe; } openlog("srp_daemon", LOG_PID | LOG_PERROR, LOG_DAEMON); config = malloc(sizeof(*config)); if (!config) { pr_err("out of memory\n"); ret = ENOMEM; goto close_log; } if (get_config(config, argc, argv)) { ret = EINVAL; goto free_config; } if (config->verbose) print_config(config); ret = umad_init(); if (ret < 0) { pr_err("umad_init failed\n"); goto clean_config; } res = alloc_res(); if (!res) goto clean_umad; if (config->once) { ret = recalc(res); goto free_res; } lockfd = check_process_uniqueness(config); if (lockfd < 0) { ret = EPERM; goto free_res; } while (received_signal == 0) { pthread_mutex_lock(&res->sync_res->mutex); if (__rescan_scheduled(res->sync_res)) { uint16_t port_lid; pthread_mutex_unlock(&res->sync_res->mutex); pr_debug("Starting a recalculation\n"); port_lid = get_port_lid(res->ud_res->ib_ctx, config->port_num); if (port_lid != res->ud_res->port_attr.lid) { if (res->ud_res->ah) { ibv_destroy_ah(res->ud_res->ah); res->ud_res->ah = NULL; } ret = create_ah(res->ud_res); if (ret) goto kill_threads; } if (res->ud_res->ah) { if (register_to_traps(res, 1)) pr_err("Fail to register to traps, maybe there " "is no opensm running on fabric or IB port is down\n"); else subscribed = 1; } clear_traps_list(res->sync_res); schedule_rescan(res->sync_res, config->recalc_time ? config->recalc_time : -1); /* empty retry_list */ pthread_mutex_lock(&res->sync_res->retry_mutex); while ((target = pop_from_retry_list(res->sync_res))) free(target); pthread_mutex_unlock(&res->sync_res->retry_mutex); recalc(res); } else if (pop_from_list(res->sync_res, &lid, &gid, &pkey)) { pthread_mutex_unlock(&res->sync_res->mutex); if (lid) { uint64_t guid; ret = get_node(res->umad_res, lid, &guid); if (ret) /* unexpected error - do a full rescan */ schedule_rescan(res->sync_res, 0); else handle_port(res, pkey, lid, guid); } else { ret = get_lid(res->umad_res, &gid, &lid); if (ret < 0) /* unexpected error - do a full rescan */ schedule_rescan(res->sync_res, 0); else { pr_debug("lid is %d\n", lid); srp_sleep(0, 100); handle_port(res, pkey, lid, ntohll(ib_gid_get_guid(&gid))); } } } else { int fd; fd_set rset; char buf[16]; struct timespec now, delta; struct timeval timeout; clock_gettime(CLOCK_MONOTONIC, &now); ts_sub(&res->sync_res->next_recalc_time, &now, &delta); pthread_mutex_unlock(&res->sync_res->mutex); if (delta.tv_sec > 0 || (delta.tv_sec == 0 && delta.tv_nsec > 0)) { timeout.tv_sec = delta.tv_sec; timeout.tv_usec = delta.tv_nsec / 1000 + 1; } else { timeout.tv_sec = 0; timeout.tv_usec = 0; } fd = wakeup_pipe[0]; FD_ZERO(&rset); FD_SET(fd, &rset); ret = select(fd + 1, &rset, NULL, NULL, &timeout); if (ret < 0) assert(errno == EINTR); while (read(fd, buf, sizeof(buf)) > 0) ; } } ret = 0; kill_threads: switch (received_signal) { case SIGINT: pr_err("Got SIGINT\n"); break; case SIGTERM: pr_err("Got SIGTERM\n"); break; case 0: break; default: pr_err("Got SIG???\n"); break; } if (subscribed) /* Traps deregistration before exiting */ register_to_traps(res, 0); close(lockfd); free_res: free_res(res); clean_umad: umad_done(); clean_config: config_destroy(config); free_config: free(config); close_log: closelog(); close_pipe: sa.sa_handler = SIG_DFL; sigaction(SIGINT, &sa, 0); sigaction(SIGTERM, &sa, 0); close(wakeup_pipe[1]); close(wakeup_pipe[0]); wakeup_pipe[0] = -1; wakeup_pipe[1] = -1; out: exit(ret ? 1 : 0); } static int recalc(struct resources *res) { struct umad_resources *umad_res = res->umad_res; int mask_match; char val[7]; int ret; ret = srpd_sys_read_string(umad_res->port_sysfs_path, "sm_lid", val, sizeof val); if (ret < 0) { pr_err("Couldn't read SM LID\n"); return ret; } umad_res->sm_lid = strtol(val, NULL, 0); if (umad_res->sm_lid == 0) { pr_err("SM LID is 0, maybe no opensm is running\n"); return -1; } ret = check_sm_cap(umad_res, &mask_match); if (ret < 0) return ret; if (mask_match) { pr_debug("Advanced SM, performing a capability query\n"); ret = do_dm_port_list(res); } else { pr_debug("Old SM, performing a full node query\n"); ret = do_full_port_list(res); } return ret; } static int get_lid(struct umad_resources *umad_res, ib_gid_t *gid, uint16_t *lid) { srp_ib_user_mad_t out_mad, in_mad; struct srp_dm_rmpp_sa_mad *in_sa_mad = get_data_ptr(in_mad); struct srp_dm_rmpp_sa_mad *out_sa_mad = get_data_ptr(out_mad); ib_path_rec_t *path_rec = (ib_path_rec_t *) out_sa_mad->data; memset(&in_mad, 0, sizeof(in_mad)); init_srp_sa_mad(&out_mad, umad_res->agent, umad_res->sm_lid, SRP_SA_ATTR_PATH_REC, 0); out_sa_mad->comp_mask = htonll( 4 | 8 | 64 | 512 | 4096 ); path_rec->sgid = *gid; path_rec->dgid = *gid; path_rec->num_path = 1; path_rec->hop_flow_raw = htonl(1 << 31); /* rawtraffic=1 hoplimit = 0 */ if (send_and_get(umad_res->portid, umad_res->agent, &out_mad, &in_mad, 0) < 0) return -1; path_rec = (ib_path_rec_t *) in_sa_mad->data; *lid = ntohs(path_rec->dlid); return 0; } srptools-1.0.2/srp_daemon/srp_daemon.sh0000755000175000001440000000422212267177232015142 00000000000000#!/bin/bash # # Copyright (c) 2006 Mellanox Technologies. All rights reserved. # # This Software is licensed under one of the following licenses: # # 1) under the terms of the "Common Public License 1.0" a copy of which is # available from the Open Source Initiative, see # http://www.opensource.org/licenses/cpl.php. # # 2) under the terms of the "The BSD License" a copy of which is # available from the Open Source Initiative, see # http://www.opensource.org/licenses/bsd-license.php. # # 3) under the terms of the "GNU General Public License (GPL) Version 2" a # copy of which is available from the Open Source Initiative, see # http://www.opensource.org/licenses/gpl-license.php. # # Licensee has the right to choose one of the above licenses. # # Redistributions of source code must retain the above copyright # notice and one of the license notices. # # Redistributions in binary form must reproduce both the above copyright # notice, one of the license notices in the documentation # and/or other materials provided with the distribution. # # $Id$ # shopt -s nullglob prog=/usr/sbin/srp_daemon params=$@ ibdir="/sys/class/infiniband" rescan_interval=60 pids="" pidfile=/var/run/srp_daemon.sh.pid mypid=$$ trap_handler() { if [ -n "$pids" ]; then kill -15 $pids > /dev/null 2>&1 wait $pids fi logger -i -t "$(basename $0)" "killing $prog." /bin/rm -f $pidfile exit 0 } # Check if there is another copy running of srp_daemon.sh if [ -f $pidfile ]; then if [ -e /proc/$(cat $pidfile 2>/dev/null)/status ]; then echo "$(basename $0) is already running. Exiting." exit 1 else /bin/rm -f $pidfile fi fi if ! echo $mypid > $pidfile; then echo "Creating $pidfile for pid $mypid failed" exit 1 fi trap 'trap_handler' 2 15 while [ ! -d ${ibdir} ] do sleep 30 done for d in ${ibdir}_mad/umad*; do hca_id="$(<$d/ibdev)" port="$(<$d/port)" add_target="${ibdir}_srp/srp-${hca_id}-${port}/add_target" if [ -e "${add_target}" ]; then ${prog} -e -c -n -i ${hca_id} -p ${port} -R ${rescan_interval} ${params} >/dev/null 2>&1 & pids="$pids $!" fi done wait srptools-1.0.2/srp_daemon/srp_sync.c0000644000175000001440000001523212267177232014463 00000000000000/* * srp_sync - discover SRP targets over IB * Copyright (c) 2005 Topspin Communications. All rights reserved. * Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. * Copyright (c) 2006 Mellanox Technologies Ltd. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the * OpenIB.org BSD license below: * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. * * $Author: ishai Rabinovitz [ishai@mellanox.co.il]$ */ #include #include #include #include #include #include #include #include "srp_daemon.h" /* * Schedule a rescan at now + when if when >= 0 or disable rescanning if * when < 0. */ void __schedule_rescan(struct sync_resources *res, int when) { struct timespec *ts = &res->next_recalc_time; clock_gettime(CLOCK_MONOTONIC, ts); ts->tv_sec = when >= 0 ? ts->tv_sec + when : LONG_MAX; } void schedule_rescan(struct sync_resources *res, int when) { pthread_mutex_lock(&res->mutex); __schedule_rescan(res, when); pthread_mutex_unlock(&res->mutex); } int __rescan_scheduled(struct sync_resources *res) { struct timespec now; clock_gettime(CLOCK_MONOTONIC, &now); return ts_cmp(&res->next_recalc_time, &now, <=); } int rescan_scheduled(struct sync_resources *res) { int ret; pthread_mutex_lock(&res->mutex); ret = __rescan_scheduled(res); pthread_mutex_unlock(&res->mutex); return ret; } int sync_resources_init(struct sync_resources *res) { int ret; res->stop_threads = 0; __schedule_rescan(res, 0); res->next_task = 0; ret = pthread_mutex_init(&res->mutex, NULL); if (ret < 0) { pr_err("could not initialize mutex\n"); return ret; } res->retry_tasks_head = NULL; ret = pthread_mutex_init(&res->retry_mutex, NULL); if (ret < 0) { pr_err("could not initialize mutex\n"); return ret; } ret = pthread_cond_init(&res->retry_cond, NULL); if (ret < 0) pr_err("could not initialize cond\n"); return ret; } void sync_resources_cleanup(struct sync_resources *res) { pthread_cond_destroy(&res->retry_cond); pthread_mutex_destroy(&res->retry_mutex); pthread_mutex_destroy(&res->mutex); } void push_gid_to_list(struct sync_resources *res, ib_gid_t *gid, uint16_t pkey) { int i; /* If there is going to be a recalc soon - do nothing */ if (rescan_scheduled(res)) return; pthread_mutex_lock(&res->mutex); /* check if the gid is already in the list */ for (i=0; i < res->next_task; ++i) if (!memcmp(&res->tasks[i].gid, gid, 16) && res->tasks[i].pkey == pkey) { pr_debug("gid is already in task list\n"); pthread_mutex_unlock(&res->mutex); return; } if (res->next_task == SIZE_OF_TASKS_LIST) { /* if the list is full, lets do a full rescan */ __schedule_rescan(res, 0); res->next_task = 0; } else { /* otherwise enter to the next entry */ res->tasks[res->next_task].gid = *gid; res->tasks[res->next_task].lid = 0; res->tasks[res->next_task].pkey = pkey; ++res->next_task; } wake_up_main_loop(); pthread_mutex_unlock(&res->mutex); } void push_lid_to_list(struct sync_resources *res, uint16_t lid, uint16_t pkey) { int i; /* If there is going to be a recalc soon - do nothing */ if (rescan_scheduled(res)) return; pthread_mutex_lock(&res->mutex); /* check if the lid is already in the list */ for (i=0; i < res->next_task; ++i) if (res->tasks[i].lid == lid && res->tasks[i].pkey == pkey) { pr_debug("lid %d is already in task list\n", lid); pthread_mutex_unlock(&res->mutex); return; } if (res->next_task == SIZE_OF_TASKS_LIST) { /* if the list is full, lets do a full rescan */ __schedule_rescan(res, 0); res->next_task = 0; } else { /* otherwise enter to the next entry */ res->tasks[res->next_task].lid = lid; res->tasks[res->next_task].pkey = pkey; memset(&res->tasks[res->next_task].gid, 0, 16); ++res->next_task; } wake_up_main_loop(); pthread_mutex_unlock(&res->mutex); } void clear_traps_list(struct sync_resources *res) { pthread_mutex_lock(&res->mutex); res->next_task = 0; pthread_mutex_unlock(&res->mutex); } /* assumes that res->mutex is locked !!! */ int pop_from_list(struct sync_resources *res, uint16_t *lid, ib_gid_t *gid, uint16_t *pkey) { int ret=0; int i; if (res->next_task) { *lid = res->tasks[0].lid; *pkey = res->tasks[0].pkey; *gid = res->tasks[0].gid; /* push the rest down */ for (i=1; i < res->next_task; ++i) res->tasks[i-1] = res->tasks[i]; ret = 1; --res->next_task; } return ret; } /* assumes that res->retry_mutex is locked !!! */ struct target_details *pop_from_retry_list(struct sync_resources *res) { struct target_details *ret = res->retry_tasks_head; if (ret) res->retry_tasks_head = ret->next; else res->retry_tasks_tail = NULL; return ret; } void push_to_retry_list(struct sync_resources *res, struct target_details *orig_target) { struct target_details *target; /* If there is going to be a recalc soon - do nothing */ if (rescan_scheduled(res)) return; target = malloc(sizeof(struct target_details)); memcpy(target, orig_target, sizeof(struct target_details)); pthread_mutex_lock(&res->retry_mutex); if (!res->retry_tasks_head) res->retry_tasks_head = target; if (res->retry_tasks_tail) res->retry_tasks_tail->next = target; res->retry_tasks_tail = target; target->next = NULL; pthread_cond_signal(&res->retry_cond); pthread_mutex_unlock(&res->retry_mutex); } /* assumes that res->retry_mutex is locked !!! */ int retry_list_is_empty(struct sync_resources *res) { return res->retry_tasks_head == NULL; } srptools-1.0.2/srp_daemon/srp_daemon.conf0000644000175000001440000000107212301603006015430 00000000000000## This is an example rules configuration file for srp_daemon. ## #This is a comment ## disallow the following dgid #d dgid=fe800000000000000002c90200402bd5 ## allow target with the following ioc_guid #a ioc_guid=00a0b80200402bd7 ## allow target with the following pkey #a pkey=ffff ## allow target with the following id_ext and ioc_guid #a id_ext=200500A0B81146A1,ioc_guid=00a0b80200402bef ## disallow all the rest #d ## ## Here is another example: ## ## Allow all targets and set queue size to 128. # a queue_size=128,max_cmd_per_lun=128 srptools-1.0.2/srp_daemon/srp_handle_traps.c0000644000175000001440000005175612274423702016160 00000000000000/* * Copyright (c) 2006 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the * OpenIB.org BSD license below: * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. * * $Author: ishai Rabinovitz [ishai@mellanox.co.il]$ * */ #include #include #include #include #include #include #include #include #include #include #include #include #include "srp_ib_types.h" #include "srp_daemon.h" void srp_sleep(time_t sec, time_t usec) { struct timespec req, rem; if (usec > 1000) { sec += usec / 1000; usec = usec % 1000; } req.tv_sec = sec; req.tv_nsec = usec * 1000000; nanosleep(&req, &rem); } /***************************************************************************** * Function: ud_resources_init *****************************************************************************/ void ud_resources_init(struct ud_resources *res) { res->dev_list = NULL; res->ib_ctx = NULL; res->send_cq = NULL; res->recv_cq = NULL; res->channel = NULL; res->qp = NULL; res->pd = NULL; res->mr = NULL; res->ah = NULL; res->send_buf = NULL; res->recv_buf = NULL; } /***************************************************************************** * Function: modify_qp_to_rts *****************************************************************************/ static int modify_qp_to_rts(struct ibv_qp *qp) { struct ibv_qp_attr attr; int flags; int rc; /* RESET -> INIT */ memset(&attr, 0, sizeof(struct ibv_qp_attr)); attr.qp_state = IBV_QPS_INIT; attr.port_num = config->port_num; attr.pkey_index = 0; attr.qkey = MY_IB_QP1_WELL_KNOWN_Q_KEY; flags = IBV_QP_STATE | IBV_QP_PKEY_INDEX | IBV_QP_PORT | IBV_QP_QKEY; rc = ibv_modify_qp(qp, &attr, flags); if (rc) { pr_err("failed to modify QP state to INIT\n"); return rc; } /* INIT -> RTR */ memset(&attr, 0, sizeof(attr)); attr.qp_state = IBV_QPS_RTR; flags = IBV_QP_STATE; rc = ibv_modify_qp(qp, &attr, flags); if (rc) { pr_err("failed to modify QP state to RTR\n"); return rc; } /* RTR -> RTS */ /* memset(&attr, 0, sizeof(attr)); */ attr.qp_state = IBV_QPS_RTS; attr.sq_psn = 0; flags = IBV_QP_STATE | IBV_QP_SQ_PSN; rc = ibv_modify_qp(qp, &attr, flags); if (rc) { pr_err("failed to modify QP state to RTS\n"); return rc; } return 0; } int modify_qp_to_err(struct ibv_qp *qp) { static struct ibv_qp_attr attr = { .qp_state = IBV_QPS_ERR, }; return ibv_modify_qp(qp, &attr, IBV_QP_STATE); } /***************************************************************************** * Function: fill_rq_entry *****************************************************************************/ static int fill_rq_entry(struct ud_resources *res, int cur_receive) { static struct ibv_recv_wr rr; static struct ibv_sge sg; static int first = 1; struct ibv_recv_wr *_bad_wr = NULL; struct ibv_recv_wr **bad_wr = &_bad_wr; int ret; /* prepare the RR */ if (first) { first = 0; memset(&rr, 0, sizeof(rr)); sg.length = RECV_BUF_SIZE; sg.lkey = res->mr->lkey; rr.next = NULL; rr.sg_list = &sg; rr.num_sge = 1; } sg.addr = (((unsigned long)res->recv_buf) + RECV_BUF_SIZE * cur_receive); rr.wr_id = cur_receive; ret = ibv_post_recv(res->qp, &rr, bad_wr); if (ret < 0) { pr_err("failed to post RR\n"); return ret; } return 0; } /***************************************************************************** * Function: fill_rq *****************************************************************************/ static int fill_rq(struct ud_resources *res) { int cur_receive; int ret; for (cur_receive=0; cur_receivenum_of_oust; ++cur_receive) { ret = fill_rq_entry(res, cur_receive); if (ret < 0) { pr_err("failed to fill_rq_entry\n"); return ret; } } return 0; } /***************************************************************************** * Function: ud_resources_create *****************************************************************************/ int ud_resources_create(struct ud_resources *res) { struct ibv_device *ib_dev = NULL; size_t size; int i; int cq_size; int num_devices; /* get device names in the system */ res->dev_list = ibv_get_device_list(&num_devices); if (!res->dev_list) { pr_err("failed to get IB devices list\n"); return -1; } for (i = 0; i < num_devices; i ++) { if (!strcmp(ibv_get_device_name(res->dev_list[i]), config->dev_name)) { ib_dev = res->dev_list[i]; break; } } if (!ib_dev) { pr_err("IB device %s wasn't found\n", config->dev_name); return -ENXIO; } pr_debug("Device %s was found\n", config->dev_name); /* get device handle */ res->ib_ctx = ibv_open_device(ib_dev); if (!res->ib_ctx) { pr_err("failed to open device %s\n", config->dev_name); return -ENXIO; } res->channel = ibv_create_comp_channel(res->ib_ctx); if (!res->channel) { pr_err("failed to create completion channel \n"); return -ENXIO; } res->pd = ibv_alloc_pd(res->ib_ctx); if (!res->pd) { pr_err("ibv_alloc_pd failed\n"); return -1; } cq_size = config->num_of_oust; res->recv_cq = ibv_create_cq(res->ib_ctx, cq_size, NULL, res->channel, 0); if (!res->recv_cq) { pr_err("failed to create CQ with %u entries\n", cq_size); return -1; } pr_debug("CQ was created with %u CQEs\n", cq_size); if (ibv_req_notify_cq(res->recv_cq, 0)) { pr_err("Couldn't request CQ notification\n"); return -1; } res->send_cq = ibv_create_cq(res->ib_ctx, 1, NULL, NULL, 0); if (!res->send_cq) { pr_err("failed to create CQ with %u entries\n", 1); return -1; } pr_debug("CQ was created with %u CQEs\n", 1); size = cq_size * RECV_BUF_SIZE + SEND_SIZE; res->recv_buf = malloc(size); if (!res->recv_buf) { pr_err("failed to malloc %Zu bytes to memory buffer\n", size); return -ENOMEM; } memset(res->recv_buf, 0, size); res->send_buf = res->recv_buf + cq_size * RECV_BUF_SIZE; res->mr = ibv_reg_mr(res->pd, res->recv_buf, size, IBV_ACCESS_LOCAL_WRITE); if (!res->mr) { pr_err("ibv_reg_mr failed\n"); return -1; } pr_debug("MR was created with addr=%p, lkey=0x%x,\n", res->recv_buf, res->mr->lkey); { struct ibv_qp_init_attr attr = { .send_cq = res->send_cq, .recv_cq = res->recv_cq, .cap = { .max_send_wr = 1, .max_recv_wr = config->num_of_oust, .max_send_sge = 1, .max_recv_sge = 1 }, .qp_type = IBV_QPT_UD, .sq_sig_all = 1, }; res->qp = ibv_create_qp(res->pd, &attr); if (!res->qp) { pr_err("failed to create QP\n"); return -1; } pr_debug("QP was created, QP number=0x%x\n", res->qp->qp_num); } /* modify the QP to RTS (connect the QPs) */ if (modify_qp_to_rts(res->qp)) { pr_err("failed to modify QP state from RESET to RTS\n"); return -1; } pr_debug("QPs were modified to RTS\n"); if (fill_rq(res)) return -1; res->mad_buffer = malloc(sizeof(ib_sa_mad_t)); if (!res->mad_buffer) { pr_err("Could not alloc mad_buffer, abort\n"); return -1; } res->mad_buffer_mutex = malloc(sizeof(pthread_mutex_t)); if (!res->mad_buffer_mutex) { pr_err("Could not alloc mad_buffer_mutex, abort\n"); return -1; } if (pthread_mutex_init(res->mad_buffer_mutex, NULL)) { pr_err("Could not init mad_buffer_mutex, abort\n"); return -1; } return 0; } uint16_t get_port_lid(struct ibv_context *ib_ctx, int port_num) { struct ibv_port_attr port_attr; return ibv_query_port(ib_ctx, port_num, &port_attr) == 0 ? port_attr.lid : 0; } int create_ah(struct ud_resources *ud_res) { struct ibv_ah_attr ah_attr; assert(!ud_res->ah); /* create the UD AV */ memset(&ah_attr, 0, sizeof(ah_attr)); if (ibv_query_port(ud_res->ib_ctx, config->port_num, &ud_res->port_attr)) { pr_err("ibv_query_port on port %u failed\n", config->port_num); return -1; } ah_attr.dlid = ud_res->port_attr.sm_lid; ah_attr.port_num = config->port_num; ud_res->ah = ibv_create_ah(ud_res->pd, &ah_attr); if (!ud_res->ah) { pr_err("failed to create UD AV\n"); return -1; } return 0; } /***************************************************************************** * Function: ud_resources_destroy *****************************************************************************/ int ud_resources_destroy(struct ud_resources *res) { int test_result = 0; if (res->qp) { if (ibv_destroy_qp(res->qp)) { pr_err("failed to destroy QP\n"); test_result = 1; } } if (res->mr) { if (ibv_dereg_mr(res->mr)) { pr_err("ibv_dereg_mr failed\n"); test_result = 1; } } if (res->send_cq) { if (ibv_destroy_cq(res->send_cq)) { pr_err("ibv_destroy_cq of CQ failed\n"); test_result = 1; } } if (res->recv_cq) { if (ibv_destroy_cq(res->recv_cq)) { pr_err("ibv_destroy_cq of CQ failed\n"); test_result = 1; } } if (res->channel) { if (ibv_destroy_comp_channel(res->channel)) { pr_err("ibv_destroy_comp_channel failed\n"); test_result = 1; } } if (res->ah) { if (ibv_destroy_ah(res->ah)) { pr_err("ibv_destroy_ah failed\n"); test_result = 1; } } if (res->pd) { if (ibv_dealloc_pd(res->pd)) { pr_err("ibv_dealloc_pd failed\n"); test_result = 1; } } if (res->ib_ctx) { if (ibv_close_device(res->ib_ctx)) { pr_err("ibv_close_device failed\n"); test_result = 1; } } if (res->dev_list) ibv_free_device_list(res->dev_list); if (res->recv_buf) free(res->recv_buf); if (res->mad_buffer) free(res->mad_buffer); if (res->mad_buffer_mutex) free(res->mad_buffer_mutex); return test_result; } static void fill_send_request(struct ud_resources *res, struct ibv_send_wr *psr, struct ibv_sge *psg, ib_mad_t *mad_hdr) { static int wr_id=0; assert(res->ah); memset(psr, 0, sizeof(*psr)); psr->next = NULL; psr->wr_id = wr_id++; psr->sg_list = psg; psr->num_sge = 1; psr->opcode = IBV_WR_SEND; // psr->send_flags = IBV_SEND_SIGNALED | IBV_SEND_INLINE; psr->send_flags = IBV_SEND_SIGNALED; psr->wr.ud.ah = res->ah; psr->wr.ud.remote_qpn = 1; psr->wr.ud.remote_qkey = MY_IB_QP1_WELL_KNOWN_Q_KEY; psg->addr = (uintptr_t) mad_hdr; psg->length = SEND_SIZE; psg->lkey = res->mr->lkey; } static int stop_threads(struct sync_resources *sync_res) { int result; pthread_mutex_lock(&sync_res->retry_mutex); result = sync_res->stop_threads; pthread_mutex_unlock(&sync_res->retry_mutex); return result; } static int poll_cq(struct sync_resources *sync_res, struct ibv_cq *cq, struct ibv_wc *wc, struct ibv_comp_channel *channel) { int ret; struct ibv_cq *ev_cq; void *ev_ctx; if (channel) { if (ibv_get_cq_event(channel, &ev_cq, &ev_ctx)) { pr_err("Failed to get cq_event\n"); return -1; } ibv_ack_cq_events(ev_cq, 1); if (ev_cq != cq) { pr_debug("CQ event for unknown CQ %p\n", ev_cq); return -1; } if (ibv_req_notify_cq(cq, 0)) { pr_err("Couldn't request CQ notification\n"); return -1; } } do { ret = ibv_poll_cq(cq, 1, wc); if (ret < 0) { pr_err("poll CQ failed\n"); return ret; } if (ret > 0 && wc->status != IBV_WC_SUCCESS) { if (!stop_threads(sync_res)) pr_err("got bad completion with status: 0x%x\n", wc->status); return -ret; } if (ret == 0 && channel) { pr_err("Weird poll returned no cqe after CQ event\n"); return -1; } } while (ret == 0); return 0; } /***************************************************************************** * Function: register_to_trap *****************************************************************************/ static int register_to_trap(struct sync_resources *sync_res, struct ud_resources *res, int dest_lid, int trap_num, int subscribe) { struct ibv_send_wr sr; struct ibv_wc wc; struct ibv_sge sg; struct ibv_send_wr *_bad_wr = NULL; struct ibv_send_wr **bad_wr = &_bad_wr; int counter = 0; int rc = 0; int ret; long long unsigned comp_mask = 0; ib_mad_t *mad_hdr = (ib_mad_t *) (res->send_buf); ib_sa_mad_t* p_sa_mad = (ib_sa_mad_t *) (res->send_buf); ib_inform_info_t *data = (ib_inform_info_t *) (p_sa_mad->data); static uint64_t trans_id = 0x0000FFFF; if (subscribe) pr_debug("Registering to trap:%d (sm in %d)\n", trap_num, dest_lid); else pr_debug("Deregistering from trap:%d (sm in %d)\n", trap_num, dest_lid); memset(res->send_buf, 0, SEND_SIZE); fill_send_request(res, &sr, &sg, mad_hdr); ib_mad_init_new(mad_hdr, /* Mad Header */ SRP_MGMT_CLASS_SA, /* Management Class */ 2, /* Class Version */ SRP_MAD_METHOD_SET, /* Method */ 0, /* Transaction ID - will be set before the send in the loop*/ htons(SRP_MAD_ATTR_INFORM_INFO), /* Attribute ID */ 0 ); /* Attribute Modifier */ data->lid_range_begin = 0xFFFF; data->is_generic = 1; data->subscribe = subscribe; if (trap_num == SRP_TRAP_JOIN) data->trap_type = htons(3); /* SM */ else if (trap_num == SRP_TRAP_CHANGE_CAP) data->trap_type = htons(4); /* Informational */ data->g_or_v.generic.trap_num = htons(trap_num); data->g_or_v.generic.node_type_msb = 0; if (trap_num == SRP_TRAP_JOIN) /* Class Manager */ data->g_or_v.generic.node_type_lsb = htons(4); else if (trap_num == SRP_TRAP_CHANGE_CAP) /* Channel Adapter */ data->g_or_v.generic.node_type_lsb = htons(1); comp_mask |= SRP_INFORMINFO_LID_COMP | SRP_INFORMINFO_ISGENERIC_COMP | SRP_INFORMINFO_SUBSCRIBE_COMP | SRP_INFORMINFO_TRAPTYPE_COMP | SRP_INFORMINFO_TRAPNUM_COMP | SRP_INFORMINFO_PRODUCER_COMP; if (!data->subscribe) { data->g_or_v.generic.qpn_resp_time_val = htonl(res->qp->qp_num << 8); comp_mask |= SRP_INFORMINFO_QPN_COMP; } p_sa_mad->comp_mask = htonll(comp_mask); pr_debug("comp_mask: %llx\n", comp_mask); do { pthread_mutex_lock(res->mad_buffer_mutex); res->mad_buffer->base_ver = 0; // flag that the buffer is empty pthread_mutex_unlock(res->mad_buffer_mutex); mad_hdr->trans_id = htonll(trans_id); trans_id++; ret = ibv_post_send(res->qp, &sr, bad_wr); if (ret) { pr_err("failed to post SR\n"); return ret; } ret = poll_cq(sync_res, res->send_cq, &wc, NULL); if (ret < 0) return ret; /* sleep and check for response from SA */ do { srp_sleep(1, 0); pthread_mutex_lock(res->mad_buffer_mutex); if (res->mad_buffer->base_ver == 0) rc = 0; else if (res->mad_buffer->trans_id == mad_hdr->trans_id) rc = 1; else { res->mad_buffer->base_ver = 0; rc = 2; } pthread_mutex_unlock(res->mad_buffer_mutex); } while (rc == 2); // while old response. } while (rc == 0 && ++counter < 3); if (counter==3) { pr_err("No response to inform info registration\n"); return -EAGAIN; } return 0; } /***************************************************************************** * Function: response_to_trap *****************************************************************************/ static int response_to_trap(struct sync_resources *sync_res, struct ud_resources *res, ib_sa_mad_t *mad_buffer) { struct ibv_send_wr sr; struct ibv_sge sg; struct ibv_send_wr *_bad_wr = NULL; struct ibv_send_wr **bad_wr = &_bad_wr; int ret; struct ibv_wc wc; ib_sa_mad_t *response_buffer = (ib_sa_mad_t *) (res->send_buf); memcpy(response_buffer, mad_buffer, sizeof(ib_sa_mad_t)); response_buffer->method = SRP_SA_METHOD_REPORT_RESP; fill_send_request(res, &sr, &sg, (ib_mad_t *) response_buffer); ret = ibv_post_send(res->qp, &sr, bad_wr); if (ret < 0) { pr_err("failed to post response\n"); return ret; } ret = poll_cq(sync_res, res->send_cq, &wc, NULL); return ret; } /***************************************************************************** * Function: get_trap_notices *****************************************************************************/ static int get_trap_notices(struct resources *res) { struct ibv_wc wc; int cur_receive = 0; int ret = 0; int pkey_index; uint16_t pkey; char *buffer; ib_sa_mad_t *mad_buffer; ib_mad_notice_attr_t *notice_buffer; int trap_num; while (!stop_threads(res->sync_res)) { ret = poll_cq(res->sync_res, res->ud_res->recv_cq, &wc, res->ud_res->channel); if (ret < 0) continue; pr_debug("get_trap_notices: Got CQE wc.wr_id=%lld\n", (long long int) wc.wr_id); cur_receive = wc.wr_id; buffer = res->ud_res->recv_buf + RECV_BUF_SIZE * cur_receive; mad_buffer = (ib_sa_mad_t *) (buffer + GRH_SIZE); if ((mad_buffer->mgmt_class == SRP_MGMT_CLASS_SA) && (mad_buffer->method == SRP_SA_METHOD_GET_RESP) && (ntohs(mad_buffer->attr_id) == SRP_MAD_ATTR_INFORM_INFO)) { /* this is probably a response to register to trap */ pthread_mutex_lock(res->ud_res->mad_buffer_mutex); *res->ud_res->mad_buffer = *mad_buffer; pthread_mutex_unlock(res->ud_res->mad_buffer_mutex); } else if ((mad_buffer->mgmt_class == SRP_MGMT_CLASS_SA) && (mad_buffer->method == SRP_SA_METHOD_REPORT) && (ntohs(mad_buffer->attr_id) == SRP_MAD_ATTR_NOTICE)) { /* this is a trap notice */ pkey_index = wc.pkey_index; ret = pkey_index_to_pkey(res->umad_res, pkey_index, &pkey); if (ret) { pr_err("get_trap_notices: Got Bad pkey_index (%d)\n", pkey_index); wake_up_main_loop(); break; } notice_buffer = (ib_mad_notice_attr_t *) (mad_buffer->data); trap_num = ntohs(notice_buffer->g_or_v.generic.trap_num); response_to_trap(res->sync_res, res->ud_res, mad_buffer); if (trap_num == SRP_TRAP_JOIN) push_gid_to_list(res->sync_res, ¬ice_buffer->data_details.ntc_64_67.gid, pkey); else if (trap_num == SRP_TRAP_CHANGE_CAP) { if (ntohl(notice_buffer->data_details.ntc_144.new_cap_mask) & SRP_IS_DM) push_lid_to_list(res->sync_res, ntohs(notice_buffer->data_details.ntc_144.lid), pkey); } else { pr_err("Unhandled trap_num %d\n", trap_num); } } ret = fill_rq_entry(res->ud_res, cur_receive); if (ret < 0) { wake_up_main_loop(); break; } } return ret; } void *run_thread_get_trap_notices(void *res_in) { int ret; ret = get_trap_notices((struct resources *)res_in); pr_debug("get_trap_notices thread ended\n"); pthread_exit((void *)(long)ret); } /***************************************************************************** * Function: register_to_traps *****************************************************************************/ int register_to_traps(struct resources *res, int subscribe) { int rc; int trap_numbers[] = {SRP_TRAP_JOIN, SRP_TRAP_CHANGE_CAP}; int i; for (i=0; i < sizeof(trap_numbers) / sizeof(*trap_numbers); ++i) { rc = register_to_trap(res->sync_res, res->ud_res, res->ud_res->port_attr.sm_lid, trap_numbers[i], subscribe); if (rc != 0) return rc; } return 0; } void *run_thread_listen_to_events(void *res_in) { struct resources *res = (struct resources *)res_in; struct ibv_async_event event; while (!stop_threads(res->sync_res)) { if (ibv_get_async_event(res->ud_res->ib_ctx, &event)) { if (errno != EINTR) pr_err("ibv_get_async_event failed (errno = %d)\n", errno); break; } pr_debug("event_type %d, port %d\n", event.event_type, event.element.port_num); switch (event.event_type) { case IBV_EVENT_PORT_ACTIVE: case IBV_EVENT_SM_CHANGE: case IBV_EVENT_LID_CHANGE: case IBV_EVENT_CLIENT_REREGISTER: case IBV_EVENT_PKEY_CHANGE: if (event.element.port_num == config->port_num) { pthread_mutex_lock(&res->sync_res->mutex); __schedule_rescan(res->sync_res, 0); wake_up_main_loop(); pthread_mutex_unlock(&res->sync_res->mutex); } break; case IBV_EVENT_DEVICE_FATAL: case IBV_EVENT_CQ_ERR: case IBV_EVENT_QP_FATAL: /* clean and restart */ pr_err("Critical event %d, ending\n", event.event_type); exit(EAGAIN); /* case IBV_EVENT_PORT_ERR: case IBV_EVENT_QP_REQ_ERR: case IBV_EVENT_QP_ACCESS_ERR: case IBV_EVENT_COMM_EST: case IBV_EVENT_SQ_DRAINED: case IBV_EVENT_PATH_MIG: case IBV_EVENT_PATH_MIG_ERR: case IBV_EVENT_SRQ_ERR: case IBV_EVENT_SRQ_LIMIT_REACHED: case IBV_EVENT_QP_LAST_WQE_REACHED: */ default: break; } ibv_ack_async_event(&event); } return NULL; } srptools-1.0.2/srp_daemon/srp_ib_types.h0000644000175000001440000002340312267177232015331 00000000000000/* * srp-ib_types - discover SRP targets over IB * Copyright (c) 2005 Topspin Communications. All rights reserved. * Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. * Copyright (c) 2006 Mellanox Technologies Ltd. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the * OpenIB.org BSD license below: * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #ifndef SRP_IB_TYPES_H #define SRP_IB_TYPES_H #include #define SRP_INFORMINFO_LID_COMP (1 << 1) #define SRP_INFORMINFO_ISGENERIC_COMP (1 << 4) #define SRP_INFORMINFO_SUBSCRIBE_COMP (1 << 5) #define SRP_INFORMINFO_TRAPTYPE_COMP (1 << 6) #define SRP_INFORMINFO_TRAPNUM_COMP (1 << 7) #define SRP_INFORMINFO_QPN_COMP (1 << 8) #define SRP_INFORMINFO_PRODUCER_COMP (1 << 12) #ifndef PACK_SUFFIX #define PACK_SUFFIX __attribute__((packed)) #endif /****d* IBA Base: Constants/MAD_BLOCK_SIZE * NAME * MAD_BLOCK_SIZE * * DESCRIPTION * Size of a non-RMPP MAD datagram. * * SOURCE */ #define MAD_BLOCK_SIZE 256 /****d* IBA Base: Types/ib_net16_t * NAME * ib_net16_t * * DESCRIPTION * Defines the network ordered type for 16-bit values. * * SOURCE */ typedef uint16_t ib_net16_t; /**********/ /****d* IBA Base: Types/ib_net32_t * NAME * ib_net32_t * * DESCRIPTION * Defines the network ordered type for 32-bit values. * * SOURCE */ typedef uint32_t ib_net32_t; /**********/ /****d* IBA Base: Types/ib_net64_t * NAME * ib_net64_t * * DESCRIPTION * Defines the network ordered type for 64-bit values. * * SOURCE */ typedef uint64_t ib_net64_t; typedef ib_net64_t ib_gid_prefix_t; /****s* IBA Base: Types/ib_sa_mad_t * NAME * ib_sa_mad_t * * DESCRIPTION * IBA defined SA MAD format. (15.2.1) * * SYNOPSIS */ #define IB_SA_DATA_SIZE 200 typedef struct _ib_sa_mad { uint8_t base_ver; uint8_t mgmt_class; uint8_t class_ver; uint8_t method; ib_net16_t status; ib_net16_t resv; ib_net64_t trans_id; ib_net16_t attr_id; ib_net16_t resv1; ib_net32_t attr_mod; uint8_t rmpp_version; uint8_t rmpp_type; uint8_t rmpp_flags; uint8_t rmpp_status; ib_net32_t seg_num; ib_net32_t paylen_newwin; ib_net64_t sm_key; ib_net16_t attr_offset; ib_net16_t resv3; ib_net64_t comp_mask; uint8_t data[IB_SA_DATA_SIZE]; } PACK_SUFFIX ib_sa_mad_t; typedef union _ib_gid { uint8_t raw[16]; struct _ib_gid_unicast { ib_gid_prefix_t prefix; ib_net64_t interface_id; } PACK_SUFFIX unicast; struct _ib_gid_multicast { uint8_t header[2]; uint8_t raw_group_id[14]; } PACK_SUFFIX multicast; } PACK_SUFFIX ib_gid_t; static inline uint32_t ib_get_attr_size(const ib_net16_t attr_offset) { return( ((uint32_t)ntohs( attr_offset )) << 3 ); } /************************************************************ * NAME * MAD_RMPP_HDR_SIZE * * DESCRIPTION * Size of an RMPP header, including the common MAD header. * * SOURCE */ enum { MAD_RMPP_HDR_SIZE = 36, }; /****s* IBA Base: Types/ib_path_rec_t * NAME * ib_path_rec_t * * DESCRIPTION * Path records encapsulate the properties of a given * route between two end-points on a subnet. * * SYNOPSIS */ typedef struct _ib_path_rec { uint8_t resv0[8]; ib_gid_t dgid; ib_gid_t sgid; ib_net16_t dlid; ib_net16_t slid; ib_net32_t hop_flow_raw; uint8_t tclass; uint8_t num_path; ib_net16_t pkey; ib_net16_t sl; uint8_t mtu; uint8_t rate; uint8_t pkt_life; uint8_t preference; uint8_t resv2[6]; } PACK_SUFFIX ib_path_rec_t; /****s* IBA Base: Types/ib_mad_t * NAME * ib_mad_t * * DESCRIPTION * IBA defined MAD header (13.4.3) * * SYNOPSIS */ typedef struct _ib_mad { uint8_t base_ver; uint8_t mgmt_class; uint8_t class_ver; uint8_t method; ib_net16_t status; ib_net16_t class_spec; ib_net64_t trans_id; ib_net16_t attr_id; ib_net16_t resv; ib_net32_t attr_mod; } PACK_SUFFIX ib_mad_t; /****f* IBA Base: Types/ib_mad_init_new * NAME * ib_mad_init_new * * DESCRIPTION * Initializes a MAD common header. * * SYNOPSIS */ static inline void ib_mad_init_new(ib_mad_t* const p_mad, const uint8_t mgmt_class, const uint8_t class_ver, const uint8_t method, const ib_net64_t trans_id, const ib_net16_t attr_id, const ib_net32_t attr_mod ) { p_mad->base_ver = 1; p_mad->mgmt_class = mgmt_class; p_mad->class_ver = class_ver; p_mad->method = method; p_mad->status = 0; p_mad->class_spec = 0; p_mad->trans_id = trans_id; p_mad->attr_id = attr_id; p_mad->resv = 0; p_mad->attr_mod = attr_mod; } typedef struct _ib_inform_info { ib_gid_t gid; ib_net16_t lid_range_begin; ib_net16_t lid_range_end; ib_net16_t reserved1; uint8_t is_generic; uint8_t subscribe; ib_net16_t trap_type; union _inform_g_or_v { struct _inform_generic { ib_net16_t trap_num; ib_net32_t qpn_resp_time_val; uint8_t reserved2; uint8_t node_type_msb; ib_net16_t node_type_lsb; } PACK_SUFFIX generic; struct _inform_vend { ib_net16_t dev_id; ib_net32_t qpn_resp_time_val; uint8_t reserved2; uint8_t vendor_id_msb; ib_net16_t vendor_id_lsb; } PACK_SUFFIX vend; } PACK_SUFFIX g_or_v; } PACK_SUFFIX ib_inform_info_t; typedef struct _ib_mad_notice_attr // Total Size calc Accumulated { uint8_t generic_type; // 1 1 union _notice_g_or_v { struct _notice_generic // 5 6 { uint8_t prod_type_msb; ib_net16_t prod_type_lsb; ib_net16_t trap_num; } PACK_SUFFIX generic; struct _notice_vend { uint8_t vend_id_msb; ib_net16_t vend_id_lsb; ib_net16_t dev_id; } PACK_SUFFIX vend; } g_or_v; ib_net16_t issuer_lid; // 2 8 ib_net16_t toggle_count; // 2 10 union _data_details // 54 64 { struct _raw_data { uint8_t details[54]; } PACK_SUFFIX raw_data; struct _ntc_64_67 { uint8_t res[6]; ib_gid_t gid; // the Node or Multicast Group that came in/out } PACK_SUFFIX ntc_64_67; struct _ntc_128 { ib_net16_t sw_lid; // the sw lid of which link state changed } PACK_SUFFIX ntc_128; struct _ntc_129_131 { ib_net16_t pad; ib_net16_t lid; // lid and port number of the violation uint8_t port_num; } PACK_SUFFIX ntc_129_131; struct _ntc_144 { ib_net16_t pad1; ib_net16_t lid; // lid where capability mask changed ib_net16_t pad2; ib_net32_t new_cap_mask; // new capability mask } PACK_SUFFIX ntc_144; struct _ntc_145 { ib_net16_t pad1; ib_net16_t lid; // lid where sys guid changed ib_net16_t pad2; ib_net64_t new_sys_guid; // new system image guid } PACK_SUFFIX ntc_145; struct _ntc_256 { // total: 54 ib_net16_t pad1; // 2 ib_net16_t lid; // 2 ib_net16_t pad2; // 2 uint8_t method; // 1 uint8_t pad3; // 1 ib_net16_t attr_id; // 2 ib_net32_t attr_mod; // 4 ib_net64_t mkey; // 8 uint8_t dr_slid; // 1 uint8_t dr_trunc_hop; // 1 uint8_t dr_rtn_path[30]; // 30 } PACK_SUFFIX ntc_256; struct _ntc_257_258 // violation of p/q_key // 49 { ib_net16_t pad1; // 2 ib_net16_t lid1; // 2 ib_net16_t lid2; // 2 ib_net32_t key; // 2 uint8_t sl; // 1 ib_net32_t qp1; // 4 ib_net32_t qp2; // 4 ib_gid_t gid1; // 16 ib_gid_t gid2; // 16 } PACK_SUFFIX ntc_257_258; struct _ntc_259 // p/q_key violation with sw info 53 { ib_net16_t data_valid; // 2 ib_net16_t lid1; // 2 ib_net16_t lid2; // 2 ib_net32_t key; // 4 uint8_t sl; // 1 ib_net32_t qp1; // 4 uint8_t qp2_msb; // 1 ib_net16_t qp2_lsb; // 2 ib_gid_t gid1; // 16 ib_gid_t gid2; // 16 ib_net16_t sw_lid; // 2 uint8_t port_no; // 1 } PACK_SUFFIX ntc_259; } data_details; ib_gid_t issuer_gid; // 16 80 } PACK_SUFFIX ib_mad_notice_attr_t; /****f* IBA Base: Types/ib_gid_get_guid * NAME * ib_gid_get_guid * * DESCRIPTION * Gets the guid from a GID. * * SYNOPSIS */ static inline ib_net64_t ib_gid_get_guid(const ib_gid_t* const p_gid) { return( p_gid->unicast.interface_id ); } #endif srptools-1.0.2/srp_daemon/srp_daemon.h0000644000175000001440000002657212301604131014746 00000000000000/* * srp_daemon - discover SRP targets over IB * Copyright (c) 2005 Topspin Communications. All rights reserved. * Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. * Copyright (c) 2006 Mellanox Technologies Ltd. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the * OpenIB.org BSD license below: * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #ifndef SRP_DM_H #define SRP_DM_H #include #include #include #include #include #include "config.h" #include "srp_ib_types.h" #if __BYTE_ORDER == __LITTLE_ENDIAN #ifndef htonll #define htonll(x) bswap_64(x) #endif #ifndef ntohll #define ntohll(x) bswap_64(x) #endif #elif __BYTE_ORDER == __BIG_ENDIAN #ifndef htonll #define htonll(x) (x) #endif #ifndef ntohll #define ntohll(x) (x) #endif #endif #ifdef __cplusplus template struct vki_static_assert { int m_bitfield:(2*b-1); }; #define STATIC_ASSERT(expr) \ (void)(sizeof(vki_static_assert<(expr)>) - sizeof(int)) #else #define STATIC_ASSERT(expr) (void)(sizeof(struct { int:-!(expr); })) #endif /* a CMP b. See also the BSD macro timercmp(). */ #define ts_cmp(a, b, CMP) \ (((a)->tv_sec == (b)->tv_sec) ? \ ((a)->tv_nsec CMP (b)->tv_nsec) : \ ((a)->tv_sec CMP (b)->tv_sec)) enum { SRP_MGMT_CLASS_SA = 3, SRP_MGMT_CLASS_DM = 6 }; enum { SRP_MGMT_CLASS_SA_VERSION = 2, }; enum { SRP_SA_RMPP_VERSION = 1, }; enum { SRP_MAD_ATTR_CLASS_PORT_INFO = 0x0001, SRP_MAD_ATTR_NOTICE = 0x0002, SRP_MAD_ATTR_INFORM_INFO = 0x0003, SRP_SA_ATTR_NODE = 0x0011, SRP_SA_ATTR_PORT_INFO = 0x0012, SRP_SA_ATTR_PATH_REC = 0x0035, SRP_DM_ATTR_IO_UNIT_INFO = 0x0010, SRP_DM_ATTR_IO_CONTROLLER_PROFILE = 0x0011, SRP_DM_ATTR_SERVICE_ENTRIES = 0x0012 }; enum { SRP_MAD_METHOD_GET = 0x01, SRP_MAD_METHOD_SET = 0x02, SRP_SA_METHOD_REPORT = 0x06, SRP_SA_METHOD_GET_TABLE = 0x12, SRP_SA_METHOD_GET_RESP = 0x81, SRP_SA_METHOD_REPORT_RESP = 0x86 }; enum { SRP_DM_NO_IOC = 0x0, SRP_DM_IOC_PRESENT = 0x1, SRP_DM_NO_SLOT = 0xf }; enum { SRP_SM_SUPPORTS_MASK_MATCH = 1 << 13, SRP_IS_DM = 1 << 19, SRP_SM_CAP_MASK_MATCH_ATTR_MOD = 1 << 31, }; enum { SRP_MAD_HEADER_SIZE = 24 }; enum { SRP_REV10_IB_IO_CLASS = 0xff00, SRP_REV16A_IB_IO_CLASS = 0x0100 }; enum { SRP_TRAP_JOIN = 0x40, /* 64 */ SRP_TRAP_LEFT = 0x41, /* 65 */ SRP_TRAP_CHANGE_CAP = 0x90 /* 144 */ }; struct srp_dm_mad { uint8_t base_version; uint8_t mgmt_class; uint8_t class_version; uint8_t method; uint16_t status; uint16_t reserved1; uint64_t tid; uint16_t attr_id; uint16_t reserved2; uint32_t attr_mod; uint8_t reserved3[40]; uint8_t data[192]; }; struct srp_dm_rmpp_sa_mad { uint8_t base_version; uint8_t mgmt_class; uint8_t class_version; uint8_t method; uint16_t status; uint16_t reserved1; uint64_t tid; uint16_t attr_id; uint16_t reserved2; uint32_t attr_mod; uint8_t rmpp_version; uint8_t rmpp_type; uint8_t rmpp_rtime_flags; uint8_t rmpp_status; uint32_t seg_num; uint32_t paylen_newwin; uint64_t sm_key __attribute__((packed)); uint16_t attr_offset; uint16_t reserved3; uint64_t comp_mask; uint8_t data[200]; }; struct srp_sa_node_rec { uint16_t lid; uint16_t reserved; uint8_t base_version; uint8_t class_version; uint8_t type; uint8_t num_ports; uint64_t sys_guid __attribute__((packed)); uint64_t node_guid __attribute__((packed)); uint64_t port_guid __attribute__((packed)); uint16_t partition_cap; uint16_t device_id; uint32_t revision; uint32_t port_num_vendor_id; uint8_t desc[64]; }; struct srp_sa_port_info_rec { uint16_t endport_lid; uint8_t port_num; uint8_t reserved; uint64_t m_key __attribute__((packed)); uint64_t subnet_prefix __attribute__((packed)); uint16_t base_lid; uint16_t master_sm_base_lid; uint32_t capability_mask __attribute__((packed)); uint16_t diag_code; uint16_t m_key_lease_period; uint8_t local_port_num; uint8_t link_width_enabled; uint8_t link_width_supported; uint8_t link_width_active; uint8_t state_info1; uint8_t state_info2; uint8_t mkey_lmc; uint8_t link_speed; uint8_t mtu_smsl; uint8_t vl_cap; uint8_t vl_high_limit; uint8_t vl_arb_high_cap; uint8_t vl_arb_low_cap; uint8_t mtu_cap; uint8_t vl_stall_life; uint8_t vl_enforce; uint16_t m_key_violations; uint16_t p_key_violations; uint16_t q_key_violations; uint8_t guid_cap; uint8_t subnet_timeout; uint8_t resp_time_value; uint8_t error_threshold; }; struct srp_class_port_info { uint8_t base_version; uint8_t class_version; uint16_t cap_mask; uint8_t reserved1[3]; uint8_t resp_time; uint8_t redir_gid[16]; uint32_t redir_tc_sl_fl; uint16_t redir_lid; uint16_t redir_pkey; uint32_t redir_qpn; uint32_t redir_qkey; uint8_t trap_gid[16]; uint32_t trap_tc_sl_fl; uint16_t trap_lid; uint16_t trap_pkey; uint32_t trap_hl_qpn; uint32_t trap_qkey; }; struct srp_dm_iou_info { uint16_t change_id; uint8_t max_controllers; uint8_t diagid_optionrom; uint8_t controller_list[128]; }; struct srp_dm_ioc_prof { uint64_t guid; uint32_t vendor_id; uint32_t device_id; uint16_t device_version; uint16_t reserved1; uint32_t subsys_vendor_id; uint32_t subsys_device_id; uint16_t io_class; uint16_t io_subclass; uint16_t protocol; uint16_t protocol_version; uint32_t reserved2; uint16_t send_queue_depth; uint8_t reserved3; uint8_t rdma_read_depth; uint32_t send_size; uint32_t rdma_size; uint8_t cap_mask; uint8_t reserved4; uint8_t service_entries; uint8_t reserved5[9]; char id[64]; }; struct srp_dm_svc_entries { struct { char name[40]; uint64_t id; } service[4]; }; enum { MY_IB_QP1_WELL_KNOWN_Q_KEY = 0x80010000 }; enum { SEND_SIZE = 256, GRH_SIZE = 40, RECV_BUF_SIZE = SEND_SIZE + GRH_SIZE, }; struct rule { int allow; char id_ext[17], ioc_guid[17], dgid[33], service_id[17], pkey[10], options[128]; }; #define SRP_MAX_SHARED_PKEYS 127 #define MAX_ID_EXT_STRING_LENGTH 17 struct target_details { uint16_t pkey; char id_ext[MAX_ID_EXT_STRING_LENGTH]; struct srp_dm_ioc_prof ioc_prof; uint64_t subnet_prefix; uint64_t h_guid; uint64_t h_service_id; time_t retry_time; char *options; struct target_details *next; }; struct config_t { char *dev_name; int port_num; char *add_target_file; int mad_retries; int num_of_oust; int cmd; int once; int execute; int all; int verbose; int debug_verbose; int timeout; int recalc_time; int print_initiator_ext; char *rules_file; struct rule *rules; int retry_timeout; int tl_retry_count; }; extern struct config_t *config; struct ud_resources { struct ibv_device **dev_list; struct ibv_context *ib_ctx; struct ibv_pd *pd; struct ibv_cq *send_cq; struct ibv_cq *recv_cq; struct ibv_qp *qp; struct ibv_mr *mr; struct ibv_ah *ah; char *recv_buf; char *send_buf; struct ibv_device_attr device_attr; struct ibv_port_attr port_attr; int cq_size; struct ibv_comp_channel *channel; pthread_mutex_t *mad_buffer_mutex; ib_sa_mad_t *mad_buffer; }; struct umad_resources { int portid; int agent; char *port_sysfs_path; uint16_t sm_lid; }; enum { SIZE_OF_TASKS_LIST = 5, }; struct sync_resources { int stop_threads; int next_task; struct timespec next_recalc_time; struct { uint16_t lid; uint16_t pkey; ib_gid_t gid; } tasks[SIZE_OF_TASKS_LIST]; pthread_mutex_t mutex; struct target_details *retry_tasks_head; struct target_details *retry_tasks_tail; pthread_mutex_t retry_mutex; pthread_cond_t retry_cond; }; struct resources { struct ud_resources *ud_res; struct umad_resources *umad_res; struct sync_resources *sync_res; pthread_t trap_thread; pthread_t async_ev_thread; pthread_t reconnect_thread; pthread_t timer_thread; }; typedef struct { struct ib_user_mad hdr; char filler[MAD_BLOCK_SIZE]; } srp_ib_user_mad_t; #if defined(HAVE_VALGRIND_DRD_H) && defined(ENABLE_VALGRIND) #include #endif #ifndef ANNOTATE_BENIGN_RACE_SIZED #define ANNOTATE_BENIGN_RACE_SIZED(a, b, c) do { } while(0) #endif #define pr_human(arg...) \ do { \ if (!config->cmd && !config->execute) \ printf(arg); \ } while (0) #define pr_debug(arg...) \ do { \ if (config->debug_verbose) \ printf(arg); \ } while (0) void pr_err(const char *fmt, ...) __attribute__((format(printf, 1, 2))); int pkey_index_to_pkey(struct umad_resources *umad_res, int pkey_index, uint16_t *pkey); void handle_port(struct resources *res, uint16_t pkey, uint16_t lid, uint64_t h_guid); void ud_resources_init(struct ud_resources *res); int ud_resources_create(struct ud_resources *res); int ud_resources_destroy(struct ud_resources *res); int wait_for_recalc(struct resources *res_in); int trap_main(struct resources *res); void *run_thread_get_trap_notices(void *res_in); void *run_thread_listen_to_events(void *res_in); int get_node(struct umad_resources *umad_res, uint16_t dlid, uint64_t *guid); int create_trap_resources(struct ud_resources *ud_res); int register_to_traps(struct resources *res, int subscribe); uint16_t get_port_lid(struct ibv_context *ib_ctx, int port_num); int create_ah(struct ud_resources *ud_res); void push_gid_to_list(struct sync_resources *res, ib_gid_t *gid, uint16_t pkey); void push_lid_to_list(struct sync_resources *res, uint16_t lid, uint16_t pkey); struct target_details *pop_from_retry_list(struct sync_resources *res); void push_to_retry_list(struct sync_resources *res, struct target_details *target); int retry_list_is_empty(struct sync_resources *res); void clear_traps_list(struct sync_resources *res); int pop_from_list(struct sync_resources *res, uint16_t *lid, ib_gid_t *gid, uint16_t *pkey); int sync_resources_init(struct sync_resources *res); void sync_resources_cleanup(struct sync_resources *res); int modify_qp_to_err(struct ibv_qp *qp); void srp_sleep(time_t sec, time_t usec); void wake_up_main_loop(void); void __schedule_rescan(struct sync_resources *res, int when); void schedule_rescan(struct sync_resources *res, int when); int __rescan_scheduled(struct sync_resources *res); int rescan_scheduled(struct sync_resources *res); #endif /* SRP_DM_H */ srptools-1.0.2/srp_daemon/logrotate-srp_daemon0000644000175000001440000000011712256536330016517 00000000000000/var/log/srp_daemon { missingok notifempty copytruncate weekly compress } srptools-1.0.2/srp_daemon/rsyslog-srp_daemon.conf0000644000175000001440000000014512256536330017146 00000000000000if $programname == 'srp_daemon' or $syslogtag == '[srp_daemon]:' \ then -/var/log/srp_daemon.log & ~ srptools-1.0.2/srp_daemon/srpd.in0000755000175000001440000000646412274112235013757 00000000000000#!/bin/bash # # Manage the SRP client daemon (srp_daemon) # # chkconfig: - 25 75 # description: Starts/Stops InfiniBand SRP client service # config: /etc/srp_daemon.conf # ### BEGIN INIT INFO # Provides: srpd # Required-Start: $syslog @RDMA_SERVICE@ # Required-Stop: $syslog @RDMA_SERVICE@ # Default-Start: @DEFAULT_START@ # Default-Stop: @DEFAULT_STOP@ # Should-Start: # Should-Stop: # Short-Description: Starts and stops the InfiniBand SRP client service # Description: The InfiniBand SRP client service attaches to SRP devices # on the InfiniBand fabric and makes them appear as local disks to # to the system. This service starts the client daemon that's # responsible for initiating and maintaining the connections to # remote devices. ### END INIT INFO if [ -e /etc/rdma/rdma.conf ]; then # RHEL / Fedora. RDMA_CONFIG=/etc/rdma/rdma.conf else # OFED RDMA_CONFIG=/etc/infiniband/openib.conf fi if [ -f $RDMA_CONFIG ]; then . $RDMA_CONFIG fi pidfile=/var/run/srp_daemon.sh.pid prog=/usr/sbin/srp_daemon.sh checkpid() { [ -e "/proc/$1" ] } stop_srp_daemon() { if ! running; then return 1 fi local pid=`cat $pidfile` kill $pid # timeout 30 seconds for termination for i in `seq 300`; do if ! checkpid $pid; then return 0 fi sleep 0.1 done kill -9 $pid # If srp_daemon executables didn't finish by now # force kill pkill -9 srp_daemon return 0 } # if the ib_srp module is loaded or built into the kernel return 0 otherwise # return 1. is_srp_mod_loaded() { [ -e /sys/module/ib_srp ] } running() { [ -f $pidfile ] && checkpid "$(cat $pidfile)" } start() { if ! is_srp_mod_loaded; then echo "SRP kernel module is not loaded, unable to start SRP daemon" return 6 fi if running; then echo "Already started" return 0 fi echo -n "Starting SRP daemon service" if [ "$SRP_DEFAULT_TL_RETRY_COUNT" ]; then params=$params"-l $SRP_DEFAULT_TL_RETRY_COUNT " fi setsid $prog $params &/dev/null & RC=$? [ $RC -eq 0 ] && echo || echo " ...failed" return $RC } stop() { echo -n "Stopping SRP daemon service" stop_srp_daemon RC=$? for ((i=0;i<5;i++)); do if ! running; then rm -f $pidfile break fi sleep 1 done [ $RC -eq 0 ] && echo || echo " ...failed" return $RC } status() { local ret if [ ! -f $pidfile ]; then ret=3 # program not running else checkpid "$(cat $pidfile)" ret=$? # 1: pid file exists and not running / 0: running fi if [ $ret -eq 0 ] ; then echo "$prog is running... pid=$(cat $pidfile)" else echo "$prog is not running." fi return $ret } restart() { stop start } condrestart() { [ -f $pidfile ] && restart || return 0 } usage() { echo echo "Usage: `basename $0` {start|stop|restart|condrestart|try-restart|force-reload|status}" echo return 2 } case $1 in start|stop|restart|condrestart|try-restart|force-reload) [ `id -u` != "0" ] && exit 4 ;; esac case $1 in start) start; RC=$? ;; stop) stop; RC=$? ;; restart) restart; RC=$? ;; reload) RC=3 ;; condrestart) condrestart; RC=$? ;; try-restart) condrestart; RC=$? ;; force-reload) condrestart; RC=$? ;; status) status; RC=$? ;; *) usage; RC=$? ;; esac exit $RC srptools-1.0.2/config.h.in0000644000175000001440000000723412301422334012337 00000000000000/* config.h.in. Generated from configure.ac by autoheader. */ /* Define to 1 if the `closedir' function returns void instead of `int'. */ #undef CLOSEDIR_VOID /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_DIRENT_H /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define to 1 if you have the `ibumad' library (-libumad). */ #undef HAVE_LIBIBUMAD /* Define to 1 if you have the `ibverbs' library (-libverbs). */ #undef HAVE_LIBIBVERBS /* Define to 1 if you have the `pthread' library (-lpthread). */ #undef HAVE_LIBPTHREAD /* Define to 1 if you have the `rt' library (-lrt). */ #undef HAVE_LIBRT /* Define to 1 if your system has a GNU libc compatible `malloc' function, and to 0 otherwise. */ #undef HAVE_MALLOC /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the `memset' function. */ #undef HAVE_MEMSET /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_NDIR_H /* Define to 1 if you have the header file. */ #undef HAVE_NETINET_IN_H /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the `strdup' function. */ #undef HAVE_STRDUP /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the `strndup' function. */ #undef HAVE_STRNDUP /* Define to 1 if you have the `strtol' function. */ #undef HAVE_STRTOL /* Define to 1 if you have the `strtoull' function. */ #undef HAVE_STRTOULL /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_SYS_DIR_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_IOCTL_H /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_SYS_NDIR_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TIME_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define to 1 if you have the header file. */ #undef HAVE_VALGRIND_DRD_H /* Define to 1 if your C compiler doesn't accept -c and -o together. */ #undef NO_MINUS_C_MINUS_O /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the home page for this package. */ #undef PACKAGE_URL /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Version number of package */ #undef VERSION /* Define to empty if `const' does not conform to ANSI C. */ #undef const /* Define to `__inline__' or `__inline' if that's what the C compiler calls it, or to nothing if 'inline' is not supported under any name. */ #ifndef __cplusplus #undef inline #endif /* Define to rpl_malloc if the replacement function should be used. */ #undef malloc /* Define to `unsigned int' if does not define. */ #undef size_t srptools-1.0.2/ChangeLog0000644000175000001440000000442112256536330012074 000000000000002006-08-16 Ishai Rabinovitz * srp_daemon: Add a new tool srp_daemon. srp_daemon check for new targets that join the fabric. It can also ask ib_srp module to connect to these targets. * Makefile.am: Was changed to call to srp_daemon Makefile. * Configure.in: Was changed to include srp_daemon. 2006-07-01 Roland Dreier * src/srp-dm.c (get_node): Use correct attribute ID to retrieve NodeRecord -- old code incorrectly queried for a PortInfoRecord. 2006-06-14 Roland Dreier * src/srp-dm.c: Add support for SMs that support queries of PortInfo that match only specified bits in the CapabilityMask. This will be more efficient on large fabrics, since only ports with the IsDM bit will be queried, instead of retrieving the full node record table for the full fabric. * src/srp-dm.h: Change SRP_DM_ATTR_CLASS_PORT_INFO to SRP_ATTR_CLASS_PORT_INFO, since it is not a per-class value. * src/srp-dm.c: Change agent array into a single value, since only the QP1 agent is ever used. 2006-06-08 Roland Dreier * src/srp-dm.c (get_port_list): In some setups (eg Cisco SFS 3001 with an FC gateway), there will be switches with the IsDM bit set on port 0. So the initial get of NodeRecords must retrieve all records, not just CA ports. 2006-06-07 Roland Dreier * src/srp-dm.c (do_port): Use correct endianness when comparing GUID against Topspin OUI. * src/srp-dm.c (set_class_port_info): Trivial whitespace fixes. 2006-05-29 Ishai Rabinovitz * src/srp-dm.c (main): The agent ID array is declared with 0 entries, which leads to corruption when it is filled in by create_agent(). Fix that by declaring it with the correct number of entries, 2. 2006-04-10 Roland Dreier * configure.in: srptools no longer needs to check for libsysfs. * src/srp-dm.c: Remove use of libsysfs -- just read directly to get what we need. Make functions static, since they are only used in one file. 2006-01-18 Yael Shenhav * src/ib_user_mad.h: Use __u16/__u32 instead of __be16/__be32, since not all toolchains export __beXX types to userspace. 2006-01-17 Roland Dreier * Release as version 0.03 srptools-1.0.2/Makefile.in0000644000175000001440000011530212301422332012353 00000000000000# Makefile.in generated by automake 1.13.4 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # $Id$ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : sbin_PROGRAMS = srp_daemon/srp_daemon$(EXEEXT) subdir = . DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ $(top_srcdir)/configure $(am__configure_deps) \ $(srcdir)/config.h.in $(srcdir)/srptools.spec.in \ $(top_srcdir)/srp_daemon/srpd.in $(top_srcdir)/config/depcomp \ COPYING ChangeLog NEWS README config/compile config/depcomp \ config/install-sh config/missing $(top_srcdir)/config/compile \ $(top_srcdir)/config/install-sh $(top_srcdir)/config/missing ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = srptools.spec srp_daemon/srpd CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(sbindir)" \ "$(DESTDIR)$(man1dir)" PROGRAMS = $(sbin_PROGRAMS) am_srp_daemon_srp_daemon_OBJECTS = \ srp_daemon_srp_daemon-srp_daemon.$(OBJEXT) \ srp_daemon_srp_daemon-srp_handle_traps.$(OBJEXT) \ srp_daemon_srp_daemon-srp_sync.$(OBJEXT) srp_daemon_srp_daemon_OBJECTS = $(am_srp_daemon_srp_daemon_OBJECTS) srp_daemon_srp_daemon_DEPENDENCIES = srp_daemon_srp_daemon_LINK = $(CCLD) $(srp_daemon_srp_daemon_CFLAGS) \ $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ am__dirstamp = $(am__leading_dot)dirstamp am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } SCRIPTS = $(sbin_SCRIPTS) AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles am__mv = mv -f AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) am__v_lt_0 = --silent am__v_lt_1 = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) AM_V_CC = $(am__v_CC_@AM_V@) am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) am__v_CC_0 = @echo " CC " $@; am__v_CC_1 = CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CCLD = $(am__v_CCLD_@AM_V@) am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) am__v_CCLD_0 = @echo " CCLD " $@; am__v_CCLD_1 = SOURCES = $(srp_daemon_srp_daemon_SOURCES) DIST_SOURCES = $(srp_daemon_srp_daemon_SOURCES) am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac man1dir = $(mandir)/man1 NROFF = nroff MANS = $(man_MANS) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ $(LISP)config.h.in # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags CSCOPE = cscope AM_RECURSIVE_TARGETS = cscope DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best DIST_TARGETS = dist-gzip distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFAULT_START = @DEFAULT_START@ DEFAULT_STOP = @DEFAULT_STOP@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RDMA_SERVICE = @RDMA_SERVICE@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AM_CFLAGS = -Wall -Wextra -Wno-sign-compare -Wno-unused-parameter man_MANS = man/ibsrpdm.1 man/srp_daemon.1 srp_daemon_srp_daemon_LDADD = -libumad -libverbs -lpthread srp_daemon_srp_daemon_CFLAGS = $(AM_CFLAGS) -I $(DESTDIR)$(includedir) \ -fno-strict-aliasing srp_daemon_srp_daemon_SOURCES = srp_daemon/srp_daemon.c srp_daemon/srp_handle_traps.c srp_daemon/srp_sync.c sbin_SCRIPTS = \ srp_daemon/srp_daemon.sh EXTRA_DIST = \ srp_daemon/srp_daemon.h \ srp_daemon/srp_ib_types.h \ srp_daemon/srp_daemon.sh \ srp_daemon/srpd.in \ srp_daemon/logrotate-srp_daemon \ srp_daemon/rsyslog-srp_daemon.conf \ srp_daemon/srp_daemon.conf \ srptools.spec.in $(man_MANS) all: config.h $(MAKE) $(AM_MAKEFLAGS) all-am .SUFFIXES: .SUFFIXES: .c .o .obj am--refresh: Makefile @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @if test ! -f $@; then rm -f stamp-h1; else :; fi @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 srptools.spec: $(top_builddir)/config.status $(srcdir)/srptools.spec.in cd $(top_builddir) && $(SHELL) ./config.status $@ srp_daemon/srpd: $(top_builddir)/config.status $(top_srcdir)/srp_daemon/srpd.in cd $(top_builddir) && $(SHELL) ./config.status $@ install-sbinPROGRAMS: $(sbin_PROGRAMS) @$(NORMAL_INSTALL) @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \ $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \ fi; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p \ ; then echo "$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n;h' \ -e 's|.*|.|' \ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) files[d] = files[d] " " $$1; \ else { print "f", $$3 "/" $$4, $$1; } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \ } \ ; done uninstall-sbinPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ -e 's/$$/$(EXEEXT)/' \ `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(sbindir)" && rm -f $$files clean-sbinPROGRAMS: -test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS) srp_daemon/$(am__dirstamp): @$(MKDIR_P) srp_daemon @: > srp_daemon/$(am__dirstamp) srp_daemon/srp_daemon$(EXEEXT): $(srp_daemon_srp_daemon_OBJECTS) $(srp_daemon_srp_daemon_DEPENDENCIES) $(EXTRA_srp_daemon_srp_daemon_DEPENDENCIES) srp_daemon/$(am__dirstamp) @rm -f srp_daemon/srp_daemon$(EXEEXT) $(AM_V_CCLD)$(srp_daemon_srp_daemon_LINK) $(srp_daemon_srp_daemon_OBJECTS) $(srp_daemon_srp_daemon_LDADD) $(LIBS) install-sbinSCRIPTS: $(sbin_SCRIPTS) @$(NORMAL_INSTALL) @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \ $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n' \ -e 'h;s|.*|.|' \ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) { files[d] = files[d] " " $$1; \ if (++n[d] == $(am__install_max)) { \ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ else { print "f", d "/" $$4, $$1 } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \ } \ ; done uninstall-sbinSCRIPTS: @$(NORMAL_UNINSTALL) @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 's,.*/,,;$(transform)'`; \ dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/srp_daemon_srp_daemon-srp_daemon.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/srp_daemon_srp_daemon-srp_handle_traps.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/srp_daemon_srp_daemon-srp_sync.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'` srp_daemon_srp_daemon-srp_daemon.o: srp_daemon/srp_daemon.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(srp_daemon_srp_daemon_CFLAGS) $(CFLAGS) -MT srp_daemon_srp_daemon-srp_daemon.o -MD -MP -MF $(DEPDIR)/srp_daemon_srp_daemon-srp_daemon.Tpo -c -o srp_daemon_srp_daemon-srp_daemon.o `test -f 'srp_daemon/srp_daemon.c' || echo '$(srcdir)/'`srp_daemon/srp_daemon.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/srp_daemon_srp_daemon-srp_daemon.Tpo $(DEPDIR)/srp_daemon_srp_daemon-srp_daemon.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='srp_daemon/srp_daemon.c' object='srp_daemon_srp_daemon-srp_daemon.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(srp_daemon_srp_daemon_CFLAGS) $(CFLAGS) -c -o srp_daemon_srp_daemon-srp_daemon.o `test -f 'srp_daemon/srp_daemon.c' || echo '$(srcdir)/'`srp_daemon/srp_daemon.c srp_daemon_srp_daemon-srp_daemon.obj: srp_daemon/srp_daemon.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(srp_daemon_srp_daemon_CFLAGS) $(CFLAGS) -MT srp_daemon_srp_daemon-srp_daemon.obj -MD -MP -MF $(DEPDIR)/srp_daemon_srp_daemon-srp_daemon.Tpo -c -o srp_daemon_srp_daemon-srp_daemon.obj `if test -f 'srp_daemon/srp_daemon.c'; then $(CYGPATH_W) 'srp_daemon/srp_daemon.c'; else $(CYGPATH_W) '$(srcdir)/srp_daemon/srp_daemon.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/srp_daemon_srp_daemon-srp_daemon.Tpo $(DEPDIR)/srp_daemon_srp_daemon-srp_daemon.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='srp_daemon/srp_daemon.c' object='srp_daemon_srp_daemon-srp_daemon.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(srp_daemon_srp_daemon_CFLAGS) $(CFLAGS) -c -o srp_daemon_srp_daemon-srp_daemon.obj `if test -f 'srp_daemon/srp_daemon.c'; then $(CYGPATH_W) 'srp_daemon/srp_daemon.c'; else $(CYGPATH_W) '$(srcdir)/srp_daemon/srp_daemon.c'; fi` srp_daemon_srp_daemon-srp_handle_traps.o: srp_daemon/srp_handle_traps.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(srp_daemon_srp_daemon_CFLAGS) $(CFLAGS) -MT srp_daemon_srp_daemon-srp_handle_traps.o -MD -MP -MF $(DEPDIR)/srp_daemon_srp_daemon-srp_handle_traps.Tpo -c -o srp_daemon_srp_daemon-srp_handle_traps.o `test -f 'srp_daemon/srp_handle_traps.c' || echo '$(srcdir)/'`srp_daemon/srp_handle_traps.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/srp_daemon_srp_daemon-srp_handle_traps.Tpo $(DEPDIR)/srp_daemon_srp_daemon-srp_handle_traps.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='srp_daemon/srp_handle_traps.c' object='srp_daemon_srp_daemon-srp_handle_traps.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(srp_daemon_srp_daemon_CFLAGS) $(CFLAGS) -c -o srp_daemon_srp_daemon-srp_handle_traps.o `test -f 'srp_daemon/srp_handle_traps.c' || echo '$(srcdir)/'`srp_daemon/srp_handle_traps.c srp_daemon_srp_daemon-srp_handle_traps.obj: srp_daemon/srp_handle_traps.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(srp_daemon_srp_daemon_CFLAGS) $(CFLAGS) -MT srp_daemon_srp_daemon-srp_handle_traps.obj -MD -MP -MF $(DEPDIR)/srp_daemon_srp_daemon-srp_handle_traps.Tpo -c -o srp_daemon_srp_daemon-srp_handle_traps.obj `if test -f 'srp_daemon/srp_handle_traps.c'; then $(CYGPATH_W) 'srp_daemon/srp_handle_traps.c'; else $(CYGPATH_W) '$(srcdir)/srp_daemon/srp_handle_traps.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/srp_daemon_srp_daemon-srp_handle_traps.Tpo $(DEPDIR)/srp_daemon_srp_daemon-srp_handle_traps.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='srp_daemon/srp_handle_traps.c' object='srp_daemon_srp_daemon-srp_handle_traps.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(srp_daemon_srp_daemon_CFLAGS) $(CFLAGS) -c -o srp_daemon_srp_daemon-srp_handle_traps.obj `if test -f 'srp_daemon/srp_handle_traps.c'; then $(CYGPATH_W) 'srp_daemon/srp_handle_traps.c'; else $(CYGPATH_W) '$(srcdir)/srp_daemon/srp_handle_traps.c'; fi` srp_daemon_srp_daemon-srp_sync.o: srp_daemon/srp_sync.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(srp_daemon_srp_daemon_CFLAGS) $(CFLAGS) -MT srp_daemon_srp_daemon-srp_sync.o -MD -MP -MF $(DEPDIR)/srp_daemon_srp_daemon-srp_sync.Tpo -c -o srp_daemon_srp_daemon-srp_sync.o `test -f 'srp_daemon/srp_sync.c' || echo '$(srcdir)/'`srp_daemon/srp_sync.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/srp_daemon_srp_daemon-srp_sync.Tpo $(DEPDIR)/srp_daemon_srp_daemon-srp_sync.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='srp_daemon/srp_sync.c' object='srp_daemon_srp_daemon-srp_sync.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(srp_daemon_srp_daemon_CFLAGS) $(CFLAGS) -c -o srp_daemon_srp_daemon-srp_sync.o `test -f 'srp_daemon/srp_sync.c' || echo '$(srcdir)/'`srp_daemon/srp_sync.c srp_daemon_srp_daemon-srp_sync.obj: srp_daemon/srp_sync.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(srp_daemon_srp_daemon_CFLAGS) $(CFLAGS) -MT srp_daemon_srp_daemon-srp_sync.obj -MD -MP -MF $(DEPDIR)/srp_daemon_srp_daemon-srp_sync.Tpo -c -o srp_daemon_srp_daemon-srp_sync.obj `if test -f 'srp_daemon/srp_sync.c'; then $(CYGPATH_W) 'srp_daemon/srp_sync.c'; else $(CYGPATH_W) '$(srcdir)/srp_daemon/srp_sync.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/srp_daemon_srp_daemon-srp_sync.Tpo $(DEPDIR)/srp_daemon_srp_daemon-srp_sync.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='srp_daemon/srp_sync.c' object='srp_daemon_srp_daemon-srp_sync.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(srp_daemon_srp_daemon_CFLAGS) $(CFLAGS) -c -o srp_daemon_srp_daemon-srp_sync.obj `if test -f 'srp_daemon/srp_sync.c'; then $(CYGPATH_W) 'srp_daemon/srp_sync.c'; else $(CYGPATH_W) '$(srcdir)/srp_daemon/srp_sync.c'; fi` install-man1: $(man_MANS) @$(NORMAL_INSTALL) @list1=''; \ list2='$(man_MANS)'; \ test -n "$(man1dir)" \ && test -n "`echo $$list1$$list2`" \ || exit 0; \ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ { for i in $$list1; do echo "$$i"; done; \ if test -n "$$list2"; then \ for i in $$list2; do echo "$$i"; done \ | sed -n '/\.1[a-z]*$$/p'; \ fi; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ done; } uninstall-man1: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man1dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-am TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-am CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-am cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-am all-am: Makefile $(PROGRAMS) $(SCRIPTS) $(MANS) config.h installdirs: for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -rm -f srp_daemon/$(am__dirstamp) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am distclean: distclean-am -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-hdr distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-man @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-data-hook install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-sbinPROGRAMS install-sbinSCRIPTS @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-exec-hook install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-man1 install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-man uninstall-sbinPROGRAMS \ uninstall-sbinSCRIPTS uninstall-man: uninstall-man1 .MAKE: all install-am install-data-am install-exec-am install-strip .PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am clean \ clean-cscope clean-generic clean-sbinPROGRAMS cscope \ cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \ dist-zip distcheck distclean distclean-compile \ distclean-generic distclean-hdr distclean-tags distcleancheck \ distdir distuninstallcheck dvi dvi-am html html-am info \ info-am install install-am install-data install-data-am \ install-data-hook install-dvi install-dvi-am install-exec \ install-exec-am install-exec-hook install-html install-html-am \ install-info install-info-am install-man install-man1 \ install-pdf install-pdf-am install-ps install-ps-am \ install-sbinPROGRAMS install-sbinSCRIPTS install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am uninstall-man uninstall-man1 \ uninstall-sbinPROGRAMS uninstall-sbinSCRIPTS dist-hook: srptools.spec cp srptools.spec $(distdir) install-exec-hook: mkdir -p $(DESTDIR)$(sysconfdir)/init.d @INSTALL_PROGRAM@ srp_daemon/srpd $(DESTDIR)$(sysconfdir)/init.d/srpd if test -e $(DESTDIR)$(sbindir)/ibsrpdm; then \ rm -f $(DESTDIR)$(sbindir)/ibsrpdm; \ fi; \ cd $(DESTDIR)$(sbindir) && ln -s srp_daemon ibsrpdm # Backward compatability for DDN supplied srptools package if test -e $(DESTDIR)$(sbindir)/run_srp_daemon; then \ rm -f $(DESTDIR)$(sbindir)/run_srp_daemon; \ fi; \ cd $(DESTDIR)$(sbindir) && ln -s srp_daemon run_srp_daemon install-data-hook: if test -e $(DESTDIR)$(sysconfdir)/srp_daemon.conf; then \ diff -q $(srcdir)/srp_daemon/srp_daemon.conf \ $(DESTDIR)$(sysconfdir)/srp_daemon.conf 1>/dev/null; \ if test $$? == 1; then \ t=$(shell date +'%Y%m%d%H%M%S'); \ @INSTALL_DATA@ $(srcdir)/srp_daemon/srp_daemon.conf \ $(DESTDIR)$(sysconfdir)/srp_daemon.conf.$$t; \ echo "NOTE: existing srp_daemon.conf was not updated."; \ echo " srp_daemon.conf installed as" \ "srp_daemon.conf.$$t instead."; \ fi; \ else \ mkdir -p $(DESTDIR)$(sysconfdir); \ @INSTALL_DATA@ $(srcdir)/srp_daemon/srp_daemon.conf \ $(DESTDIR)$(sysconfdir); \ fi mkdir -p $(DESTDIR)$(sysconfdir)/logrotate.d @INSTALL_DATA@ $(srcdir)/srp_daemon/logrotate-srp_daemon \ $(DESTDIR)$(sysconfdir)/logrotate.d/srp_daemon mkdir -p $(DESTDIR)$(sysconfdir)/rsyslog.d @INSTALL_DATA@ $(srcdir)/srp_daemon/rsyslog-srp_daemon.conf \ $(DESTDIR)$(sysconfdir)/rsyslog.d/srp_daemon.conf rpm: name=@PACKAGE@ && \ version=@VERSION@ && \ rpmtopdir="$$(if [ $$(id -u) = 0 ]; then echo /usr/src/packages; \ else echo $$PWD/rpmbuilddir; fi)" && \ make dist-gzip && \ rm -rf $${rpmtopdir} && \ mkdir -p $${rpmtopdir}/{BUILD,RPMS,SOURCES,SPECS,SRPMS} && \ cp $${name}-$${version}.tar.gz $${rpmtopdir}/SOURCES && \ rpmbuild --define="%_topdir $${rpmtopdir}" -ba $${name}.spec deb: ./build-deb.sh ${TARGET} # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: srptools-1.0.2/configure0000755000175000001440000056133712301422332012232 00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.69 for srptools 1.0.2. # # Report bugs to . # # # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. # # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # Use a proper internal environment variable to ensure we don't fall # into an infinite loop, continuously re-executing ourselves. if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then _as_can_reexec=no; export _as_can_reexec; # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 as_fn_exit 255 fi # We don't want this to propagate to other subprocesses. { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : else exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1 test -x / || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 test \$(( 1 + 1 )) = 2 || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir/$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : CONFIG_SHELL=$as_shell as_have_required=yes if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : break 2 fi fi done;; esac as_found=false done $as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : CONFIG_SHELL=$SHELL as_have_required=yes fi; } IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : export CONFIG_SHELL # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 fi if test x$as_have_required = xno; then : $as_echo "$0: This script requires a shell more modern than all" $as_echo "$0: the shells that I found on your system." if test x${ZSH_VERSION+set} = xset ; then $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" $as_echo "$0: be upgraded to zsh 4.3.4 or later." else $as_echo "$0: Please tell bug-autoconf@gnu.org and $0: users@lists.openfabrics.org about your system, $0: including any error possibly output before this $0: message. Then install a modern shell, or manually run $0: the script under such a shell if you do have one." fi exit 1 fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # If we had to re-execute with $CONFIG_SHELL, we're ensured to have # already done that, so ensure we don't try to do so again and fall # in an infinite loop. This has already happened in practice. _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME='srptools' PACKAGE_TARNAME='srptools' PACKAGE_VERSION='1.0.2' PACKAGE_STRING='srptools 1.0.2' PACKAGE_BUGREPORT='users@lists.openfabrics.org' PACKAGE_URL='' ac_unique_file="srp_daemon/srp_daemon.c" # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS LIBOBJS EGREP GREP CPP am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE am__nodep AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE am__quote am__include DEPDIR OBJEXT EXEEXT ac_ct_CC CPPFLAGS LDFLAGS CFLAGS CC DEFAULT_STOP DEFAULT_START RDMA_SERVICE AM_BACKSLASH AM_DEFAULT_VERBOSITY AM_DEFAULT_V AM_V am__untar am__tar AMTAR am__leading_dot SET_MAKE AWK mkdir_p MKDIR_P INSTALL_STRIP_PROGRAM STRIP install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking enable_silent_rules enable_libcheck with_rdma_service enable_dependency_tracking ' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS CPP' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *=) ac_optarg= ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error $? "unrecognized option: \`$ac_option' Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures srptools 1.0.2 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/srptools] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of srptools 1.0.2:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-silent-rules less verbose build output (undo: "make V=1") --disable-silent-rules verbose build output (undo: "make V=0") --disable-libcheck do not test for presence of ib libraries --enable-dependency-tracking do not reject slow dependency extractors --disable-dependency-tracking speeds up one-time build Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-rdma-service=name name of the RDMA service: "rdma" when using /etc/init.d/rdma to start RDMA services; "openibd" when using /etc/init.d/openibd to start RDMA services [default=openibd] Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to . _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF srptools configure 1.0.2 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## # ac_fn_c_try_compile LINENO # -------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_compile # ac_fn_c_try_link LINENO # ----------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || test -x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_link # ac_fn_c_try_cpp LINENO # ---------------------- # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } > conftest.i && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_cpp # ac_fn_c_try_run LINENO # ---------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. Assumes # that executables *can* be run. ac_fn_c_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then : ac_retval=0 else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=$ac_status fi rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_run # ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists, giving a warning if it cannot be compiled using # the include files in INCLUDES and setting the cache variable VAR # accordingly. ac_fn_c_check_header_mongrel () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if eval \${$3+:} false; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 $as_echo_n "checking $2 usability... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_header_compiler=yes else ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 $as_echo_n "checking $2 presence... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <$2> _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : ac_header_preproc=yes else ac_header_preproc=no fi rm -f conftest.err conftest.i conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( yes:no: ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ;; no:yes:* ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ( $as_echo "## ------------------------------------------ ## ## Report this to users@lists.openfabrics.org ## ## ------------------------------------------ ##" ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else eval "$3=\$ac_header_compiler" fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_mongrel # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in # INCLUDES, setting the cache variable VAR accordingly. ac_fn_c_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_compile # ac_fn_c_check_type LINENO TYPE VAR INCLUDES # ------------------------------------------- # Tests whether TYPE exists after having included INCLUDES, setting cache # variable VAR accordingly. ac_fn_c_check_type () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else eval "$3=no" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { if (sizeof ($2)) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { if (sizeof (($2))) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else eval "$3=yes" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_type # ac_fn_c_check_func LINENO FUNC VAR # ---------------------------------- # Tests whether FUNC exists, setting the cache variable VAR accordingly ac_fn_c_check_func () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Define $2 to an innocuous variant, in case declares $2. For example, HP-UX 11i declares gettimeofday. */ #define $2 innocuous_$2 /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $2 (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $2 /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $2 (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$2 || defined __stub___$2 choke me #endif int main () { return $2 (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_func cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by srptools $as_me 1.0.2, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo $as_echo "## ---------------- ## ## Cache variables. ## ## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo $as_echo "## ----------------- ## ## Output variables. ## ## ----------------- ##" echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then $as_echo "## ------------------- ## ## File substitutions. ## ## ------------------- ##" echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then $as_echo "## ----------- ## ## confdefs.h. ## ## ----------- ##" echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h $as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_URL "$PACKAGE_URL" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then # We do not want a PATH search for config.site. case $CONFIG_SITE in #(( -*) ac_site_file1=./$CONFIG_SITE;; */*) ac_site_file1=$CONFIG_SITE;; *) ac_site_file1=./$CONFIG_SITE;; esac elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" \ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "failed to load site script $ac_site_file See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special files # actually), so we avoid doing that. DJGPP emulates it as a regular file. if test /dev/null != "$cache_file" && test -f "$cache_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_aux_dir= for ac_dir in config "$srcdir"/config; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then as_fn_error $? "cannot find install-sh, install.sh, or shtool in config \"$srcdir\"/config" "$LINENO" 5 fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. ac_config_headers="$ac_config_headers config.h" am__api_version='1.13' # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if ${ac_cv_path_install+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in #(( ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". as_fn_error $? "ls -t appears to fail. Make sure there is not a broken alias in your environment" "$LINENO" 5 fi if test "$2" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$2" = conftest.file ) then # Ok. : else as_fn_error $? "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi rm -f conftest.file test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if ${ac_cv_path_mkdir+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi test -d ./--version && rmdir ./--version if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. MKDIR_P="$ac_install_sh -d" fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_AWK+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering ...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null # Check whether --enable-silent-rules was given. if test "${enable_silent_rules+set}" = set; then : enableval=$enable_silent_rules; fi case $enable_silent_rules in # ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=1;; esac am_make=${MAKE-make} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 $as_echo_n "checking whether $am_make supports nested variables... " >&6; } if ${am_cv_make_support_nested_variables+:} false; then : $as_echo_n "(cached) " >&6 else if $as_echo 'TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 $as_echo "$am_cv_make_support_nested_variables" >&6; } if test $am_cv_make_support_nested_variables = yes; then AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AM_BACKSLASH='\' if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE='srptools' VERSION='1.0.2' cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # mkdir_p='$(MKDIR_P)' # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AMTAR='$${TAR-tar}' # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar pax cpio none' am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' # Check whether --enable-libcheck was given. if test "${enable_libcheck+set}" = set; then : enableval=$enable_libcheck; if test x$enableval = xno ; then disable_libcheck=yes fi fi # resolve config dir. conf_dir_tmp1="`eval echo ${sysconfdir} | sed 's/^NONE/$ac_default_prefix/'`" SYS_CONFIG_DIR="`eval echo $conf_dir_tmp1`" # Check whether --with-rdma_service was given. if test "${with_rdma_service+set}" = set; then : withval=$with_rdma_service; fi RDMA_SERVICE=${with_rdma_service:-openibd} if { rpm -q sles-release || rpm -q openSUSE-release; } >/dev/null 2>&1; then default_start="2 3 5" default_stop="0 1 4 6" else default_start="2 3 4 5" default_stop="0 1 6" fi DEFAULT_START=$default_start DEFAULT_STOP=$default_stop # Checks for programs. ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 $as_echo_n "checking whether the C compiler works... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi if test -z "$ac_file"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error 77 "C compiler cannot create executables See \`config.log' for more details" "$LINENO" 5; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 $as_echo_n "checking for C compiler default output file name... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of executables: cannot compile and link See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { FILE *f = fopen ("conftest.out", "w"); return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF ac_clean_files="$ac_clean_files conftest.out" # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } if test "$cross_compiling" != yes; then { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if { ac_try='./conftest$ac_cv_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details" "$LINENO" 5; } fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if ${ac_cv_objext+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of object files: cannot compile See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from 'make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if ${am_cv_CC_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi if test "x$CC" != xcc; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5 $as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5 $as_echo_n "checking whether cc understands -c and -o together... " >&6; } fi set dummy $CC; ac_cc=`$as_echo "$2" | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` if eval \${ac_cv_prog_cc_${ac_cc}_c_o+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF # Make sure it works both with $CC and with simple cc. # We do the test twice because some compilers refuse to overwrite an # existing .o file with -o, though they will create one. ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' rm -f conftest2.* if { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -f conftest2.$ac_objext && { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then eval ac_cv_prog_cc_${ac_cc}_c_o=yes if test "x$CC" != xcc; then # Test first that cc exists at all. if { ac_try='cc -c conftest.$ac_ext >&5' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' rm -f conftest2.* if { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -f conftest2.$ac_objext && { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then # cc works too. : else # cc exists but doesn't like -o. eval ac_cv_prog_cc_${ac_cc}_c_o=no fi fi fi else eval ac_cv_prog_cc_${ac_cc}_c_o=no fi rm -f core conftest* fi if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } $as_echo "#define NO_MINUS_C_MINUS_O 1" >>confdefs.h fi # FIXME: we rely on the cache variable name because # there is no other way. set dummy $CC am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o if test "$am_t" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi # Checks for libraries. if test "$disable_libcheck" != "yes" then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for umad_init in -libumad" >&5 $as_echo_n "checking for umad_init in -libumad... " >&6; } if ${ac_cv_lib_ibumad_umad_init+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-libumad $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char umad_init (); int main () { return umad_init (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_ibumad_umad_init=yes else ac_cv_lib_ibumad_umad_init=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ibumad_umad_init" >&5 $as_echo "$ac_cv_lib_ibumad_umad_init" >&6; } if test "x$ac_cv_lib_ibumad_umad_init" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_LIBIBUMAD 1 _ACEOF LIBS="-libumad $LIBS" else as_fn_error $? "srptools requires libibumad." "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ibv_get_device_list in -libverbs" >&5 $as_echo_n "checking for ibv_get_device_list in -libverbs... " >&6; } if ${ac_cv_lib_ibverbs_ibv_get_device_list+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-libverbs $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char ibv_get_device_list (); int main () { return ibv_get_device_list (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_ibverbs_ibv_get_device_list=yes else ac_cv_lib_ibverbs_ibv_get_device_list=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ibverbs_ibv_get_device_list" >&5 $as_echo "$ac_cv_lib_ibverbs_ibv_get_device_list" >&6; } if test "x$ac_cv_lib_ibverbs_ibv_get_device_list" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_LIBIBVERBS 1 _ACEOF LIBS="-libverbs $LIBS" else as_fn_error $? "srptools requires libibverbs." "$LINENO" 5 fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_self in -lpthread" >&5 $as_echo_n "checking for pthread_self in -lpthread... " >&6; } if ${ac_cv_lib_pthread_pthread_self+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lpthread $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char pthread_self (); int main () { return pthread_self (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_pthread_pthread_self=yes else ac_cv_lib_pthread_pthread_self=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_pthread_self" >&5 $as_echo "$ac_cv_lib_pthread_pthread_self" >&6; } if test "x$ac_cv_lib_pthread_pthread_self" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_LIBPTHREAD 1 _ACEOF LIBS="-lpthread $LIBS" else as_fn_error $? "srptools requires libpthread." "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for clock_gettime in -lrt" >&5 $as_echo_n "checking for clock_gettime in -lrt... " >&6; } if ${ac_cv_lib_rt_clock_gettime+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lrt $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char clock_gettime (); int main () { return clock_gettime (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_rt_clock_gettime=yes else ac_cv_lib_rt_clock_gettime=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_rt_clock_gettime" >&5 $as_echo "$ac_cv_lib_rt_clock_gettime" >&6; } if test "x$ac_cv_lib_rt_clock_gettime" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_LIBRT 1 _ACEOF LIBS="-lrt $LIBS" else as_fn_error $? "srptools requires librt." "$LINENO" 5 fi # Checks for header files. ac_header_dirent=no for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_hdr that defines DIR" >&5 $as_echo_n "checking for $ac_hdr that defines DIR... " >&6; } if eval \${$as_ac_Header+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include <$ac_hdr> int main () { if ((DIR *) 0) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$as_ac_Header=yes" else eval "$as_ac_Header=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$as_ac_Header { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 _ACEOF ac_header_dirent=$ac_hdr; break fi done # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. if test $ac_header_dirent = dirent.h; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 $as_echo_n "checking for library containing opendir... " >&6; } if ${ac_cv_search_opendir+:} false; then : $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char opendir (); int main () { return opendir (); ; return 0; } _ACEOF for ac_lib in '' dir; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi if ac_fn_c_try_link "$LINENO"; then : ac_cv_search_opendir=$ac_res fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext if ${ac_cv_search_opendir+:} false; then : break fi done if ${ac_cv_search_opendir+:} false; then : else ac_cv_search_opendir=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 $as_echo "$ac_cv_search_opendir" >&6; } ac_res=$ac_cv_search_opendir if test "$ac_res" != no; then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 $as_echo_n "checking for library containing opendir... " >&6; } if ${ac_cv_search_opendir+:} false; then : $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char opendir (); int main () { return opendir (); ; return 0; } _ACEOF for ac_lib in '' x; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi if ac_fn_c_try_link "$LINENO"; then : ac_cv_search_opendir=$ac_res fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext if ${ac_cv_search_opendir+:} false; then : break fi done if ${ac_cv_search_opendir+:} false; then : else ac_cv_search_opendir=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 $as_echo "$ac_cv_search_opendir" >&6; } ac_res=$ac_cv_search_opendir if test "$ac_res" != no; then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if ${ac_cv_prog_CPP+:} false; then : $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details" "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if ${ac_cv_path_GREP+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_GREP" || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if ${ac_cv_path_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_EGREP" || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if ${ac_cv_header_stdc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in fcntl.h netinet/in.h stdint.h stdlib.h string.h sys/ioctl.h sys/time.h unistd.h valgrind/drd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done # Checks for typedefs, structures, and compiler characteristics. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 $as_echo_n "checking for an ANSI C-conforming const... " >&6; } if ${ac_cv_c_const+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __cplusplus /* Ultrix mips cc rejects this sort of thing. */ typedef int charset[2]; const charset cs = { 0, 0 }; /* SunOS 4.1.1 cc rejects this. */ char const *const *pcpcc; char **ppc; /* NEC SVR4.0.2 mips cc rejects this. */ struct point {int x, y;}; static struct point const zero = {0,0}; /* AIX XL C 1.02.0.0 rejects this. It does not let you subtract one const X* pointer from another in an arm of an if-expression whose if-part is not a constant expression */ const char *g = "string"; pcpcc = &g + (g ? g-g : 0); /* HPUX 7.0 cc rejects these. */ ++pcpcc; ppc = (char**) pcpcc; pcpcc = (char const *const *) ppc; { /* SCO 3.2v4 cc rejects this sort of thing. */ char tx; char *t = &tx; char const *s = 0 ? (char *) 0 : (char const *) 0; *t++ = 0; if (s) return 0; } { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ int x[] = {25, 17}; const int *foo = &x[0]; ++foo; } { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ typedef const int *iptr; iptr p = 0; ++p; } { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ struct s { int j; const int *ap[3]; } bx; struct s *b = &bx; b->j = 5; } { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ const int foo = 10; if (!foo) return 0; } return !cs[0] && !zero.x; #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_c_const=yes else ac_cv_c_const=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 $as_echo "$ac_cv_c_const" >&6; } if test $ac_cv_c_const = no; then $as_echo "#define const /**/" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5 $as_echo_n "checking for inline... " >&6; } if ${ac_cv_c_inline+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifndef __cplusplus typedef int foo_t; static $ac_kw foo_t static_foo () {return 0; } $ac_kw foo_t foo () {return 0; } #endif _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_c_inline=$ac_kw fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext test "$ac_cv_c_inline" != no && break done fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5 $as_echo "$ac_cv_c_inline" >&6; } case $ac_cv_c_inline in inline | yes) ;; *) case $ac_cv_c_inline in no) ac_val=;; *) ac_val=$ac_cv_c_inline;; esac cat >>confdefs.h <<_ACEOF #ifndef __cplusplus #define inline $ac_val #endif _ACEOF ;; esac ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" if test "x$ac_cv_type_size_t" = xyes; then : else cat >>confdefs.h <<_ACEOF #define size_t unsigned int _ACEOF fi # Checks for library functions. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether closedir returns void" >&5 $as_echo_n "checking whether closedir returns void... " >&6; } if ${ac_cv_func_closedir_void+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : ac_cv_func_closedir_void=yes else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default #include <$ac_header_dirent> #ifndef __cplusplus int closedir (); #endif int main () { return closedir (opendir (".")) != 0; ; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_closedir_void=no else ac_cv_func_closedir_void=yes fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_closedir_void" >&5 $as_echo "$ac_cv_func_closedir_void" >&6; } if test $ac_cv_func_closedir_void = yes; then $as_echo "#define CLOSEDIR_VOID 1" >>confdefs.h fi if test $ac_cv_c_compiler_gnu = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC needs -traditional" >&5 $as_echo_n "checking whether $CC needs -traditional... " >&6; } if ${ac_cv_prog_gcc_traditional+:} false; then : $as_echo_n "(cached) " >&6 else ac_pattern="Autoconf.*'x'" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include Autoconf TIOCGETP _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "$ac_pattern" >/dev/null 2>&1; then : ac_cv_prog_gcc_traditional=yes else ac_cv_prog_gcc_traditional=no fi rm -f conftest* if test $ac_cv_prog_gcc_traditional = no; then cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include Autoconf TCGETA _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "$ac_pattern" >/dev/null 2>&1; then : ac_cv_prog_gcc_traditional=yes fi rm -f conftest* fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_gcc_traditional" >&5 $as_echo "$ac_cv_prog_gcc_traditional" >&6; } if test $ac_cv_prog_gcc_traditional = yes; then CC="$CC -traditional" fi fi for ac_header in stdlib.h do : ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default" if test "x$ac_cv_header_stdlib_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_STDLIB_H 1 _ACEOF fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible malloc" >&5 $as_echo_n "checking for GNU libc compatible malloc... " >&6; } if ${ac_cv_func_malloc_0_nonnull+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : ac_cv_func_malloc_0_nonnull=no else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #if defined STDC_HEADERS || defined HAVE_STDLIB_H # include #else char *malloc (); #endif int main () { return ! malloc (0); ; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_malloc_0_nonnull=yes else ac_cv_func_malloc_0_nonnull=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_malloc_0_nonnull" >&5 $as_echo "$ac_cv_func_malloc_0_nonnull" >&6; } if test $ac_cv_func_malloc_0_nonnull = yes; then : $as_echo "#define HAVE_MALLOC 1" >>confdefs.h else $as_echo "#define HAVE_MALLOC 0" >>confdefs.h case " $LIBOBJS " in *" malloc.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS malloc.$ac_objext" ;; esac $as_echo "#define malloc rpl_malloc" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working memcmp" >&5 $as_echo_n "checking for working memcmp... " >&6; } if ${ac_cv_func_memcmp_working+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : ac_cv_func_memcmp_working=no else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default int main () { /* Some versions of memcmp are not 8-bit clean. */ char c0 = '\100', c1 = '\200', c2 = '\201'; if (memcmp(&c0, &c2, 1) >= 0 || memcmp(&c1, &c2, 1) >= 0) return 1; /* The Next x86 OpenStep bug shows up only when comparing 16 bytes or more and with at least one buffer not starting on a 4-byte boundary. William Lewis provided this test program. */ { char foo[21]; char bar[21]; int i; for (i = 0; i < 4; i++) { char *a = foo + i; char *b = bar + i; strcpy (a, "--------01111111"); strcpy (b, "--------10000000"); if (memcmp (a, b, 16) >= 0) return 1; } return 0; } ; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_memcmp_working=yes else ac_cv_func_memcmp_working=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_memcmp_working" >&5 $as_echo "$ac_cv_func_memcmp_working" >&6; } test $ac_cv_func_memcmp_working = no && case " $LIBOBJS " in *" memcmp.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS memcmp.$ac_objext" ;; esac for ac_func in memset strdup strndup strtol strtoull do : as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done ac_config_files="$ac_config_files Makefile" ac_config_files="$ac_config_files srptools.spec srp_daemon/srpd" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then if test "x$cache_file" != "x/dev/null"; then { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} if test ! -f "$cache_file" || test -h "$cache_file"; then cat confcache >"$cache_file" else case $cache_file in #( */* | ?:*) mv -f confcache "$cache_file"$$ && mv -f "$cache_file"$$ "$cache_file" ;; #( *) mv -f confcache "$cache_file" ;; esac fi fi else { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs { $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 $as_echo_n "checking that generated files are newer than configure... " >&6; } if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 $as_echo "done" >&6; } if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' else am__EXEEXT_TRUE='#' am__EXEEXT_FALSE= fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then as_fn_error $? "conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi : "${CONFIG_STATUS=./config.status}" ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by srptools $as_me 1.0.2, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ srptools config.status 1.0.2 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" Copyright (C) 2012 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; --*=) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg= ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header as_fn_error $? "ambiguous option: \`$1' Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error $? "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "srptools.spec") CONFIG_FILES="$CONFIG_FILES srptools.spec" ;; "srp_daemon/srpd") CONFIG_FILES="$CONFIG_FILES srp_daemon/srpd" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= ac_tmp= trap 'exit_status=$? : "${ac_tmp:=$tmp}" { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ac_tmp=$tmp # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$ac_tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove sole $(srcdir), # ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ h s/// s/^/:/ s/[ ]*$/:/ s/:\$(srcdir):/:/g s/:\${srcdir}:/:/g s/:@srcdir@:/:/g s/^:*// s/:*$// x s/\(=[ ]*\).*/\1/ G s/\n// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$ac_tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_tt=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_tt"; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$ac_tmp/stdin" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ "$ac_tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$ac_tmp/stdin" case $ac_file in -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; esac \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" } >"$ac_tmp/config.h" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$ac_tmp/config.h" "$ac_file" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ || as_fn_error $? "could not create -" "$LINENO" 5 fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || { # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named 'Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir=$dirpart/$fdir; as_fn_mkdir_p # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit 1 fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi srptools-1.0.2/man/0000755000175000001440000000000012301664041011144 500000000000000srptools-1.0.2/man/ibsrpdm.10000644000175000001440000000130112267177232012615 00000000000000.TH IBSRPDM 1 "August 30, 2005" "OpenFabrics" "USER COMMANDS" .SH NAME ibsrpdm \- Discover SRP targets on an InfiniBand Fabric .SH SYNOPSIS .B ibsrpdm [\fIOPTIONS\fB] .SH DESCRIPTION .PP List InfiniBand SCSI RDMA Protocol (SRP) targets on an IB fabric. .SH OPTIONS .PP .TP \fB\-c\fR Generate output suitable for piping directly to a /sys/class/infiniband_srp/srp\-\-/add_target file .TP \fB\-d\fR \fIDEVICE\fR Use device file \fIDEVICE\fR (default /dev/infiniband/umad0) .TP \fB\-k\fR \fIP_KEY\fR Use InfiniBand partition key \fIP_KEY\fR (default 0xffff) .TP \fB\-v\fR Print more verbose output .SH SEE ALSO .BR srp_daemon (1) .SH AUTHORS .TP Roland Dreier .RI < roland@kernel.org > srptools-1.0.2/man/srp_daemon.10000644000175000001440000001327212256536330013312 00000000000000.TH SRP_DAEMON 1 "September 5, 2006" "OpenFabrics" "USER COMMANDS" .SH NAME srp_daemon \- Discovers SRP targets in an InfiniBand Fabric .SH SYNOPSIS .B srp_daemon [-vVcaeon] [-d \fIumad-device\fR | -i \fIinfiniband-device\fR [-p \fIport-num\fR]] [-t \fItimeout(ms)\fR] [-r \fIretries\fR] [-R \fIRescan-time\fR] [-f \fIrules-File\fR] .SH DESCRIPTION .PP Discovers and connects to InfiniBand SCSI RDMA Protocol (SRP) targets in an IB fabric. Each srp_daemon instance operates on one local port. Upon boot it performs a full rescan of the fabric then waits for an srp_daemon event. An srp_daemon event can be a join of a new machine to the fabric, a change in the capabilities of a machine, an SA change, or an expiration of a predefined timeout. When a new machine joins the fabric, srp_daemon checks if it is a target. When there is a change of capabilities, srp_daemon checks if the machine has turned into a target. When there is an SA change or a timeout expiration, srp_daemon performs a full rescan of the fabric. For each target srp_daemon finds, it checks if it should connect to this target according to its rules (default rules file is /etc/srp_daemon.conf) and if it is already connected to the local port. If it should connect to this target and if it is not connected yet, srp_daemon can either print the target details or connect to it. .SH OPTIONS .PP .TP \fB\-v\fR Print more verbose output .TP \fB\-V\fR Print even more verbose output (debug mode) .TP \fB\-i\fR \fIinfiniband-device\fR Work on \fIinfiniband-device\fR. This option should not be used with -d. .TP \fB\-p\fR \fIport-num\fR Work on port \fIport-num\fR (default 1). This option must be used with -i and should not be used with -d. .TP \fB\-d\fR \fIumad-device\fR Use device file \fIumad-device\fR (default /dev/infiniband/umad0) This option should not be used with -i or -p. .TP \fB\-c\fR Generate output suitable for piping directly to a /sys/class/infiniband_srp/srp\-\-/add_target file. .TP \fB\-a\fR Prints all the targets in the fabric, not only targets that are not connected through the local port. (The same as ibsrpdm.) .TP \fB\-e\fR Execute the connection command, i.e., make the connection to the target. .TP \fB\-o\fR Perform only one rescan and exit. (The same as ibsrpdm.) .TP \fB\-R\fR \fIRescan-time\fR Force a complete rescan every \fIRescan-time\fR seconds. If -R is not specified, no timeout rescans will be performed. .TP \fB\-T\fR \fIretry-Timeout\fR Retries to connect to existing target after \fIretry-Timeout\fR seconds. If -R is not specified, uses 5 Seconds timeout. if retry-Timeout is 0, will not try to reconnect. The reason srp_daemon retries to connect to the target is because there may be a rare scnerio in which srp_daemon will try to connect to add a target when the target is about to be removed, but is not removed yet. .TP \fB\-f\fR \fIrules-File\fR Decide to which targets to connect according to the rules in \fIrules-File\fR. If \fB\-f\fR is not specified, uses the default rules file /etc/srp_daemon.conf. Each line in the \fIrules-File\fR is a rule which can be either an allow connection or a disallow connection according to the first character in the line (a or d accordingly). The rest of the line is values for id_ext, ioc_guid, dgid, service_id. Please take a look at the example section for an example of the file. srp_daemon decide whether to allow or disallow each target according to first rule that match the target. If no rule matches the target, the target is allowed and will be connected. In an allow rule it is possible to set attributes for the connection to the target. Supported attributes are max_cmd_per_lun and max_sect. .TP \fB\-t\fR \fItimeout\fR Use timeout of \fItimeout\fR msec for MAD responses (default: 5 sec). .TP \fB\-r\fR \fIretries\fR Perform \fIretries\fR retries on each send to MAD (default: 3 retries). .TP \fB\-n\fR New format - use also initiator_ext in the connection command. .SH FILES /etc/srp_daemon.conf - Default rules configuration file that indicates to which targets to connect. Can be overridden using the \fB\-f\fR \fIrules-File\fR option. Each line in this file is a rule which can be either an allow connection or a disallow connection according to the first character in the line (a or d accordingly). The rest of the line is values for id_ext, ioc_guid, dgid, service_id. Please take a look at the example section for an example of the file. srp_daemon decide whether to allow or disallow each target according to first rule that match the target. If no rule matches the target, the target is allowed and will be connected. In an allow rule it is possible to set attributes for the connection to the target. Supported attributes are max_cmd_per_lun and max_sect. .SH EXAMPLES srp_daemon -e -i mthca0 -p 1 -R 60 (Connects to the targets accessible through port 1 of mthca0. Performs a complete rescan every minute) srp_daemon -o -c -a (Prints the connection commands for the targets in the fabric and exits - similar to ibsrpdm) srp_daemon -e -f rules.txt (Connects to the targets allowed in the rules file rules.txt) .nf An example for a rules configuration file (such as /etc/srp_daemon.conf) ------------------------------------------------------------------------ # Rules file example # This is a comment # disallow the following dgid d dgid=fe800000000000000002c90200402bd5 # allow target with the following ioc_guid a ioc_guid=00a0b80200402bd7 # allow target with the following id_ext and ioc_guid. And setting max_cmd_per_lun to 31. a id_ext=200500A0B81146A1,ioc_guid=00a0b80200402bef,max_cmd_per_lun=31 # disallow all the rest d .fi .SH SEE ALSO .BR ibsrpdm (1) .SH AUTHORS .TP Roland Dreier .RI < rolandd@cisco.com > .TP Ishai Rabinovitz .RI < ishai@mellanox.co.il > srptools-1.0.2/COPYING0000644000175000001440000004645712256536330011374 00000000000000This software is available to you under a choice of one of two licenses. You may choose to be licensed under the terms of the the OpenIB.org BSD license or the GNU General Public License (GPL) Version 2, both included below. ================================================================== OpenIB.org BSD license Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ================================================================== GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. , 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License. srptools-1.0.2/config/0000755000175000001440000000000012301664041011636 500000000000000srptools-1.0.2/config/install-sh0000755000175000001440000003325512300402216013563 00000000000000#!/bin/sh # install - install a program, script, or datafile scriptversion=2011-11-20.07; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # 'make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. nl=' ' IFS=" "" $nl" # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} if test -z "$doit"; then doit_exec=exec else doit_exec=$doit fi # Put in absolute file names if you don't have them in your path; # or use environment vars. chgrpprog=${CHGRPPROG-chgrp} chmodprog=${CHMODPROG-chmod} chownprog=${CHOWNPROG-chown} cmpprog=${CMPPROG-cmp} cpprog=${CPPROG-cp} mkdirprog=${MKDIRPROG-mkdir} mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} posix_glob='?' initialize_posix_glob=' test "$posix_glob" != "?" || { if (set -f) 2>/dev/null; then posix_glob= else posix_glob=: fi } ' posix_mkdir= # Desired mode of installed file. mode=0755 chgrpcmd= chmodcmd=$chmodprog chowncmd= mvcmd=$mvprog rmcmd="$rmprog -f" stripcmd= src= dst= dir_arg= dst_arg= copy_on_change=false no_target_directory= usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: --help display this help and exit. --version display version info and exit. -c (ignored) -C install only if different (preserve the last data modification time) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -s $stripprog installed files. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test $# -ne 0; do case $1 in -c) ;; -C) copy_on_change=true;; -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 case $mode in *' '* | *' '* | *' '* | *'*'* | *'?'* | *'['*) echo "$0: invalid mode: $mode" >&2 exit 1;; esac shift;; -o) chowncmd="$chownprog $2" shift;; -s) stripcmd=$stripprog;; -t) dst_arg=$2 # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac shift;; -T) no_target_directory=true;; --version) echo "$0 $scriptversion"; exit $?;; --) shift break;; -*) echo "$0: invalid option: $1" >&2 exit 1;; *) break;; esac shift done if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dst_arg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dst_arg" shift # fnord fi shift # arg dst_arg=$arg # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac done fi if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call 'install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then do_exit='(exit $ret); exit $ret' trap "ret=129; $do_exit" 1 trap "ret=130; $do_exit" 2 trap "ret=141; $do_exit" 13 trap "ret=143; $do_exit" 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. case $mode in # Optimize common cases. *644) cp_umask=133;; *755) cp_umask=22;; *[0-7]) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac fi for src do # Protect names problematic for 'test' and other utilities. case $src in -* | [=\(\)!]) src=./$src;; esac if test -n "$dir_arg"; then dst=$src dstdir=$dst test -d "$dstdir" dstdir_status=$? else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dst_arg # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else # Prefer dirname, but fall back on a substitute if dirname fails. dstdir=` (dirname "$dst") 2>/dev/null || expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$dst" : 'X\(//\)[^/]' \| \ X"$dst" : 'X\(//\)$' \| \ X"$dst" : 'X\(/\)' \| . 2>/dev/null || echo X"$dst" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q' ` test -d "$dstdir" dstdir_status=$? fi fi obsolete_mkdir_used=false if test $dstdir_status != 0; then case $posix_mkdir in '') # Create intermediate dirs using mode 755 as modified by the umask. # This is like FreeBSD 'install' as of 1997-10-28. umask=`umask` case $stripcmd.$umask in # Optimize common cases. *[2367][2367]) mkdir_umask=$umask;; .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; *[0-7]) mkdir_umask=`expr $umask + 22 \ - $umask % 100 % 40 + $umask % 20 \ - $umask % 10 % 4 + $umask % 2 `;; *) mkdir_umask=$umask,go-w;; esac # With -d, create the new directory with the user-specified mode. # Otherwise, rely on $mkdir_umask. if test -n "$dir_arg"; then mkdir_mode=-m$mode else mkdir_mode= fi posix_mkdir=false case $umask in *[123567][0-7][0-7]) # POSIX mkdir -p sets u+wx bits regardless of umask, which # is incompatible with FreeBSD 'install' when (umask & 300) != 0. ;; *) tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 if (umask $mkdir_umask && exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. ls_ld_tmpdir=`ls -ld "$tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && $mkdirprog -m$different_mode -p -- "$tmpdir" && { ls_ld_tmpdir_1=`ls -ld "$tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi rmdir "$tmpdir/d" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null fi trap '' 0;; esac;; esac if $posix_mkdir && ( umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else # The umask is ridiculous, or mkdir does not conform to POSIX, # or it failed possibly due to a race condition. Create the # directory the slow way, step by step, checking for races as we go. case $dstdir in /*) prefix='/';; [-=\(\)!]*) prefix='./';; *) prefix='';; esac eval "$initialize_posix_glob" oIFS=$IFS IFS=/ $posix_glob set -f set fnord $dstdir shift $posix_glob set +f IFS=$oIFS prefixes= for d do test X"$d" = X && continue prefix=$prefix$d if test -d "$prefix"; then prefixes= else if $posix_mkdir; then (umask=$mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break # Don't fail if two instances are running concurrently. test -d "$prefix" || exit 1 else case $prefix in *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; *) qprefix=$prefix;; esac prefixes="$prefixes '$qprefix'" fi fi prefix=$prefix/ done if test -n "$prefixes"; then # Don't fail if two instances are running concurrently. (umask $mkdir_umask && eval "\$doit_exec \$mkdirprog $prefixes") || test -d "$dstdir" || exit 1 obsolete_mkdir_used=true fi fi fi if test -n "$dir_arg"; then { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && eval "$initialize_posix_glob" && $posix_glob set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && $posix_glob set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then rm -f "$dsttmp" else # Rename the file to the real destination. $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. { # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { test ! -f "$dst" || $doit $rmcmd -f "$dst" 2>/dev/null || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } } || { echo "$0: cannot unlink or rename $dst" >&2 (exit 1); exit 1 } } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 trap '' 0 fi done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: srptools-1.0.2/config/missing0000755000175000001440000001533112300402216013151 00000000000000#! /bin/sh # Common wrapper for a few potentially missing GNU programs. scriptversion=2012-06-26.16; # UTC # Copyright (C) 1996-2013 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try '$0 --help' for more information" exit 1 fi case $1 in --is-lightweight) # Used by our autoconf macros to check whether the available missing # script is modern enough. exit 0 ;; --run) # Back-compat with the calling convention used by older automake. shift ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit Supported PROGRAM values: aclocal autoconf autoheader autom4te automake makeinfo bison yacc flex lex help2man Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and 'g' are ignored when checking the name. Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: unknown '$1' option" echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac # Run the given program, remember its exit status. "$@"; st=$? # If it succeeded, we are done. test $st -eq 0 && exit 0 # Also exit now if we it failed (or wasn't found), and '--version' was # passed; such an option is passed most likely to detect whether the # program is present and works. case $2 in --version|--help) exit $st;; esac # Exit code 63 means version mismatch. This often happens when the user # tries to use an ancient version of a tool on a file that requires a # minimum version. if test $st -eq 63; then msg="probably too old" elif test $st -eq 127; then # Program was missing. msg="missing on your system" else # Program was found and executed, but failed. Give up. exit $st fi perl_URL=http://www.perl.org/ flex_URL=http://flex.sourceforge.net/ gnu_software_URL=http://www.gnu.org/software program_details () { case $1 in aclocal|automake) echo "The '$1' program is part of the GNU Automake package:" echo "<$gnu_software_URL/automake>" echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/autoconf>" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; autoconf|autom4te|autoheader) echo "The '$1' program is part of the GNU Autoconf package:" echo "<$gnu_software_URL/autoconf/>" echo "It also requires GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; esac } give_advice () { # Normalize program name to check for. normalized_program=`echo "$1" | sed ' s/^gnu-//; t s/^gnu//; t s/^g//; t'` printf '%s\n' "'$1' is $msg." configure_deps="'configure.ac' or m4 files included by 'configure.ac'" case $normalized_program in autoconf*) echo "You should only need it if you modified 'configure.ac'," echo "or m4 files included by it." program_details 'autoconf' ;; autoheader*) echo "You should only need it if you modified 'acconfig.h' or" echo "$configure_deps." program_details 'autoheader' ;; automake*) echo "You should only need it if you modified 'Makefile.am' or" echo "$configure_deps." program_details 'automake' ;; aclocal*) echo "You should only need it if you modified 'acinclude.m4' or" echo "$configure_deps." program_details 'aclocal' ;; autom4te*) echo "You might have modified some maintainer files that require" echo "the 'automa4te' program to be rebuilt." program_details 'autom4te' ;; bison*|yacc*) echo "You should only need it if you modified a '.y' file." echo "You may want to install the GNU Bison package:" echo "<$gnu_software_URL/bison/>" ;; lex*|flex*) echo "You should only need it if you modified a '.l' file." echo "You may want to install the Fast Lexical Analyzer package:" echo "<$flex_URL>" ;; help2man*) echo "You should only need it if you modified a dependency" \ "of a man page." echo "You may want to install the GNU Help2man package:" echo "<$gnu_software_URL/help2man/>" ;; makeinfo*) echo "You should only need it if you modified a '.texi' file, or" echo "any other file indirectly affecting the aspect of the manual." echo "You might want to install the Texinfo package:" echo "<$gnu_software_URL/texinfo/>" echo "The spurious makeinfo call might also be the consequence of" echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" echo "want to install GNU make:" echo "<$gnu_software_URL/make/>" ;; *) echo "You might have modified some files without having the proper" echo "tools for further handling them. Check the 'README' file, it" echo "often tells you about the needed prerequisites for installing" echo "this package. You may also peek at any GNU archive site, in" echo "case some other package contains this missing '$1' program." ;; esac } give_advice "$1" | sed -e '1s/^/WARNING: /' \ -e '2,$s/^/ /' >&2 # Propagate the correct exit status (expected to be 127 for a program # not found, 63 for a program that failed due to version mismatch). exit $st # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: srptools-1.0.2/config/compile0000755000175000001440000001624512300402216013135 00000000000000#! /bin/sh # Wrapper for compilers which do not understand '-c -o'. scriptversion=2012-10-14.11; # UTC # Copyright (C) 1999-2013 Free Software Foundation, Inc. # Written by Tom Tromey . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # This file is maintained in Automake, please report # bugs to or send patches to # . nl=' ' # We need space, tab and new line, in precisely that order. Quoting is # there to prevent tools from complaining about whitespace usage. IFS=" "" $nl" file_conv= # func_file_conv build_file lazy # Convert a $build file to $host form and store it in $file # Currently only supports Windows hosts. If the determined conversion # type is listed in (the comma separated) LAZY, no conversion will # take place. func_file_conv () { file=$1 case $file in / | /[!/]*) # absolute file, and not a UNC file if test -z "$file_conv"; then # lazily determine how to convert abs files case `uname -s` in MINGW*) file_conv=mingw ;; CYGWIN*) file_conv=cygwin ;; *) file_conv=wine ;; esac fi case $file_conv/,$2, in *,$file_conv,*) ;; mingw/*) file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` ;; cygwin/*) file=`cygpath -m "$file" || echo "$file"` ;; wine/*) file=`winepath -w "$file" || echo "$file"` ;; esac ;; esac } # func_cl_dashL linkdir # Make cl look for libraries in LINKDIR func_cl_dashL () { func_file_conv "$1" if test -z "$lib_path"; then lib_path=$file else lib_path="$lib_path;$file" fi linker_opts="$linker_opts -LIBPATH:$file" } # func_cl_dashl library # Do a library search-path lookup for cl func_cl_dashl () { lib=$1 found=no save_IFS=$IFS IFS=';' for dir in $lib_path $LIB do IFS=$save_IFS if $shared && test -f "$dir/$lib.dll.lib"; then found=yes lib=$dir/$lib.dll.lib break fi if test -f "$dir/$lib.lib"; then found=yes lib=$dir/$lib.lib break fi if test -f "$dir/lib$lib.a"; then found=yes lib=$dir/lib$lib.a break fi done IFS=$save_IFS if test "$found" != yes; then lib=$lib.lib fi } # func_cl_wrapper cl arg... # Adjust compile command to suit cl func_cl_wrapper () { # Assume a capable shell lib_path= shared=: linker_opts= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as 'compile cc -o foo foo.c'. eat=1 case $2 in *.o | *.[oO][bB][jJ]) func_file_conv "$2" set x "$@" -Fo"$file" shift ;; *) func_file_conv "$2" set x "$@" -Fe"$file" shift ;; esac ;; -I) eat=1 func_file_conv "$2" mingw set x "$@" -I"$file" shift ;; -I*) func_file_conv "${1#-I}" mingw set x "$@" -I"$file" shift ;; -l) eat=1 func_cl_dashl "$2" set x "$@" "$lib" shift ;; -l*) func_cl_dashl "${1#-l}" set x "$@" "$lib" shift ;; -L) eat=1 func_cl_dashL "$2" ;; -L*) func_cl_dashL "${1#-L}" ;; -static) shared=false ;; -Wl,*) arg=${1#-Wl,} save_ifs="$IFS"; IFS=',' for flag in $arg; do IFS="$save_ifs" linker_opts="$linker_opts $flag" done IFS="$save_ifs" ;; -Xlinker) eat=1 linker_opts="$linker_opts $2" ;; -*) set x "$@" "$1" shift ;; *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) func_file_conv "$1" set x "$@" -Tp"$file" shift ;; *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) func_file_conv "$1" mingw set x "$@" "$file" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -n "$linker_opts"; then linker_opts="-link$linker_opts" fi exec "$@" $linker_opts exit 1 } eat= case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: compile [--help] [--version] PROGRAM [ARGS] Wrapper for compilers which do not understand '-c -o'. Remove '-o dest.o' from ARGS, run PROGRAM with the remaining arguments, and rename the output as expected. If you are trying to build a whole package this is not the right script to run: please start by reading the file 'INSTALL'. Report bugs to . EOF exit $? ;; -v | --v*) echo "compile $scriptversion" exit $? ;; cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) func_cl_wrapper "$@" # Doesn't return... ;; esac ofile= cfile= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as 'compile cc -o foo foo.c'. # So we strip '-o arg' only if arg is an object. eat=1 case $2 in *.o | *.obj) ofile=$2 ;; *) set x "$@" -o "$2" shift ;; esac ;; *.c) cfile=$1 set x "$@" "$1" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -z "$ofile" || test -z "$cfile"; then # If no '-o' option was seen then we might have been invoked from a # pattern rule where we don't need one. That is ok -- this is a # normal compilation that the losing compiler can handle. If no # '.c' file was seen then we are probably linking. That is also # ok. exec "$@" fi # Name of file we expect compiler to create. cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` # Create the lock directory. # Note: use '[/\\:.-]' here to ensure that we don't use the same name # that we are using for the .o file. Also, base the name on the expected # object file name, since that is what matters with a parallel build. lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d while true; do if mkdir "$lockdir" >/dev/null 2>&1; then break fi sleep 1 done # FIXME: race condition here if user kills between mkdir and trap. trap "rmdir '$lockdir'; exit 1" 1 2 15 # Run the compile. "$@" ret=$? if test -f "$cofile"; then test "$cofile" = "$ofile" || mv "$cofile" "$ofile" elif test -f "${cofile}bj"; then test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" fi rmdir "$lockdir" exit $ret # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: srptools-1.0.2/config/depcomp0000755000175000001440000005601612300402216013134 00000000000000#! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2013-05-30.07; # UTC # Copyright (C) 1999-2013 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by 'PROGRAMS ARGS'. object Object file output by 'PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputting dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac # Get the directory component of the given path, and save it in the # global variables '$dir'. Note that this directory component will # be either empty or ending with a '/' character. This is deliberate. set_dir_from () { case $1 in */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; *) dir=;; esac } # Get the suffix-stripped basename of the given path, and save it the # global variable '$base'. set_base_from () { base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` } # If no dependency file was actually created by the compiler invocation, # we still have to create a dummy depfile, to avoid errors with the # Makefile "include basename.Plo" scheme. make_dummy_depfile () { echo "#dummy" > "$depfile" } # Factor out some common post-processing of the generated depfile. # Requires the auxiliary global variable '$tmpdepfile' to be set. aix_post_process_depfile () { # If the compiler actually managed to produce a dependency file, # post-process it. if test -f "$tmpdepfile"; then # Each line is of the form 'foo.o: dependency.h'. # Do two passes, one to just change these to # $object: dependency.h # and one to simply output # dependency.h: # which is needed to avoid the deleted-header problem. { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" } > "$depfile" rm -f "$tmpdepfile" else make_dummy_depfile fi } # A tabulation character. tab=' ' # A newline character. nl=' ' # Character ranges might be problematic outside the C locale. # These definitions help. upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ lower=abcdefghijklmnopqrstuvwxyz digits=0123456789 alpha=${upper}${lower} if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Avoid interferences from the environment. gccflag= dashmflag= # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi cygpath_u="cygpath -u -f -" if test "$depmode" = msvcmsys; then # This is just like msvisualcpp but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvisualcpp fi if test "$depmode" = msvc7msys; then # This is just like msvc7 but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvc7 fi if test "$depmode" = xlc; then # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. gccflag=-qmakedep=gcc,-MF depmode=gcc fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. ## Unfortunately, FreeBSD c89 acceptance of flags depends upon ## the command line argument order; so add the flags where they ## appear in depend2.am. Note that the slowdown incurred here ## affects only configure: in makefiles, %FASTDEP% shortcuts this. for arg do case $arg in -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; *) set fnord "$@" "$arg" ;; esac shift # fnord shift # $arg done "$@" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. ## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. ## (see the conditional assignment to $gccflag above). ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). Also, it might not be ## supported by the other compilers which use the 'gcc' depmode. ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The second -e expression handles DOS-style file names with drive # letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the "deleted header file" problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. ## Some versions of gcc put a space before the ':'. On the theory ## that the space means something, we add a space to the output as ## well. hp depmode also adds that space, but also prefixes the VPATH ## to the object. Take care to not repeat it in the output. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like '#:fec' to the end of the # dependency line. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ | tr "$nl" ' ' >> "$depfile" echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" ;; xlc) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts '$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else tmpdepfile1=$dir$base.u tmpdepfile2=$dir$base.u tmpdepfile3=$dir$base.u "$@" -M fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done aix_post_process_depfile ;; tcc) # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 # FIXME: That version still under development at the moment of writing. # Make that this statement remains true also for stable, released # versions. # It will wrap lines (doesn't matter whether long or short) with a # trailing '\', as in: # # foo.o : \ # foo.c \ # foo.h \ # # It will put a trailing '\' even on the last line, and will use leading # spaces rather than leading tabs (at least since its commit 0394caf7 # "Emit spaces for -MD"). "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. # We have to change lines of the first kind to '$object: \'. sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" # And for each line of the second kind, we have to emit a 'dep.h:' # dummy dependency, to avoid the deleted-header problem. sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" rm -f "$tmpdepfile" ;; ## The order of this option in the case statement is important, since the ## shell code in configure will try each of these formats in the order ## listed in this file. A plain '-MD' option would be understood by many ## compilers, so we must ensure this comes after the gcc and icc options. pgcc) # Portland's C compiler understands '-MD'. # Will always output deps to 'file.d' where file is the root name of the # source file under compilation, even if file resides in a subdirectory. # The object file name does not affect the name of the '.d' file. # pgcc 10.2 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using '\' : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... set_dir_from "$object" # Use the source, not the object, to determine the base name, since # that's sadly what pgcc will do too. set_base_from "$source" tmpdepfile=$base.d # For projects that build the same source file twice into different object # files, the pgcc approach of using the *source* file root name can cause # problems in parallel builds. Use a locking strategy to avoid stomping on # the same $tmpdepfile. lockdir=$base.d-lock trap " echo '$0: caught signal, cleaning up...' >&2 rmdir '$lockdir' exit 1 " 1 2 13 15 numtries=100 i=$numtries while test $i -gt 0; do # mkdir is a portable test-and-set. if mkdir "$lockdir" 2>/dev/null; then # This process acquired the lock. "$@" -MD stat=$? # Release the lock. rmdir "$lockdir" break else # If the lock is being held by a different process, wait # until the winning process is done or we timeout. while test -d "$lockdir" && test $i -gt 0; do sleep 1 i=`expr $i - 1` done fi i=`expr $i - 1` done trap - 1 2 13 15 if test $i -le 0; then echo "$0: failed to acquire lock after $numtries attempts" >&2 echo "$0: check lockdir '$lockdir'" >&2 exit 1 fi if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp2) # The "hp" stanza above does not work with aCC (C++) and HP's ia64 # compilers, which have integrated preprocessors. The correct option # to use with these is +Maked; it writes dependencies to a file named # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d "$@" -Wc,+Maked else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d "$@" +Maked fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" # Add 'dependent.h:' lines. sed -ne '2,${ s/^ *// s/ \\*$// s/$/:/ p }' "$tmpdepfile" >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in 'foo.d' instead, so we check for that too. # Subdirectories are respected. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then # Libtool generates 2 separate objects for the 2 libraries. These # two compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir$base.o.d # libtool 1.5 tmpdepfile2=$dir.libs/$base.o.d # Likewise. tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d "$@" -MD fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done # Same post-processing that is required for AIX mode. aix_post_process_depfile ;; msvc7) if test "$libtool" = yes; then showIncludes=-Wc,-showIncludes else showIncludes=-showIncludes fi "$@" $showIncludes > "$tmpdepfile" stat=$? grep -v '^Note: including file: ' "$tmpdepfile" if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The first sed program below extracts the file names and escapes # backslashes for cygpath. The second sed program outputs the file # name when reading, but also accumulates all include files in the # hold buffer in order to output them again at the end. This only # works with sed implementations that can handle large buffers. sed < "$tmpdepfile" -n ' /^Note: including file: *\(.*\)/ { s//\1/ s/\\/\\\\/g p }' | $cygpath_u | sort -u | sed -n ' s/ /\\ /g s/\(.*\)/'"$tab"'\1 \\/p s/.\(.*\) \\/\1:/ H $ { s/.*/'"$tab"'/ G p }' >> "$depfile" echo >> "$depfile" # make sure the fragment doesn't end with a backslash rm -f "$tmpdepfile" ;; msvc7msys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for ':' # in the target name. This is to cope with DOS-style filenames: # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. "$@" $dashmflag | sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this sed invocation # correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift cleared=no eat=no for arg do case $cleared in no) set ""; shift cleared=yes ;; esac if test $eat = yes; then eat=no continue fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -arch) eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" # makedepend may prepend the VPATH from the source file name to the object. # No need to regex-escape $object, excess matching of '.' is harmless. sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process the last invocation # correctly. Breaking it into two sed invocations is a workaround. sed '1,2d' "$tmpdepfile" \ | tr ' ' "$nl" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E \ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi IFS=" " for arg do case "$arg" in -o) shift ;; $object) shift ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E 2>/dev/null | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" echo "$tab" >> "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; msvcmsys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: