debian/0000775000000000000000000000000012014772203007166 5ustar debian/control0000664000000000000000000001740712013466603010605 0ustar Source: u-boot-linaro Section: misc Priority: extra Maintainer: Ubuntu Developers XSBC-Original-Maintainer: John Rigby Build-Depends: quilt (>= 0.46-7~), debhelper (>= 7.0.50~), gcc-4.7 | gcc-4.5 Standards-Version: 3.9.1 Vcs-Git: git://git.linaro.org/boot/u-boot-linaro-stable.git Package: u-boot-linaro-ca9x4-ct-vxp Architecture: armel armhf Depends: ${shlibs:Depends}, ${misc:Depends} Description: U-Boot bootloader binary for the ARM ca9x4_ct_vxp (Versatile Express) board This package contains the U-Boot bootloader which is responsible for loading and executing the Linux kernel on this board. This package contains the u-boot binary blob, and is not usually needed on a normal system Package: u-boot-linaro-efikamx Architecture: armel armhf Depends: ${shlibs:Depends}, ${misc:Depends} Description: U-Boot bootloader binary for the Genesi i.MX515 Efika MX This package contains the U-Boot bootloader which is responsible for loading and executing the Linux kernel on this board. This package contains the u-boot binary blob, and is not usually needed on a normal system Package: u-boot-linaro-highbank Architecture: armel armhf Depends: ${shlibs:Depends}, ${misc:Depends} Description: U-Boot bootloader binary for the Calxeda Highbank This package contains the U-Boot bootloader which is responsible for loading and executing the Linux kernel on this board. This package contains the u-boot binary blob, and is not usually needed on a normal system Package: u-boot-linaro-igep0020 Architecture: armel armhf Depends: ${shlibs:Depends}, ${misc:Depends} Description: U-Boot bootloader binary for the ISEE igep0020 (IGEPv2) board This package contains the U-Boot bootloader which is responsible for loading and executing the Linux kernel on this board. This package contains the u-boot binary blob, and is not usually needed on a normal system Package: u-boot-linaro-mx51evk Architecture: armel armhf Depends: ${shlibs:Depends}, ${misc:Depends} Description: U-Boot bootloader binary for the Freescale i.MX51 mx51evk (Babbage) board This package contains the U-Boot bootloader which is responsible for loading and executing the Linux kernel on this board. This package contains the u-boot binary blob, and is not usually needed on a normal system Package: u-boot-linaro-mx53ard Architecture: armel armhf Depends: ${shlibs:Depends}, ${misc:Depends} Description: U-Boot bootloader binary for the Freescale i.MX53 mx53ard platform This package contains the U-Boot bootloader which is responsible for loading and executing the Linux kernel on this board. This package contains the u-boot binary blob, and is not usually needed on a normal system Package: u-boot-linaro-mx53loco Architecture: armel armhf Depends: ${shlibs:Depends}, ${misc:Depends} Description: U-Boot bootloader binary for the Freescale i.MX53 mx53loco (Babbage) board This package contains the U-Boot bootloader which is responsible for loading and executing the Linux kernel on this board. This package contains the u-boot binary blob, and is not usually needed on a normal system Package: u-boot-linaro-mx6qarm2 Architecture: armel armhf Depends: ${shlibs:Depends}, ${misc:Depends} Description: U-Boot bootloader binary for the Freescale MX6Q Armadillo2 board This package contains the U-Boot bootloader which is responsible for loading and executing the Linux kernel on this board. This package contains the u-boot binary blob, and is not usually needed on a normal system Package: u-boot-linaro-mx6qsabrelite Architecture: armel armhf Depends: ${shlibs:Depends}, ${misc:Depends} Description: U-Boot bootloader binary for the Freescale MX6Q Sabrelite board This package contains the U-Boot bootloader which is responsible for loading and executing the Linux kernel on this board. This package contains the u-boot binary blob, and is not usually needed on a normal system Package: u-boot-linaro-omap3-beagle Architecture: armel armhf Depends: ${shlibs:Depends}, ${misc:Depends} Description: U-Boot bootloader binary for various TI OMAP3 Beagle boards This package contains the U-Boot bootloader which is responsible for loading and executing the Linux kernel on those boards. This package contains the u-boot binary blob, and is not usually needed on a normal system Package: u-boot-linaro-omap3-overo Architecture: armel armhf Depends: ${shlibs:Depends}, ${misc:Depends} Description: U-Boot bootloader binary for Gumstix Overo boards This package contains the U-Boot bootloader which is responsible for loading and executing the Linux kernel on those boards. This package contains the u-boot binary blob, and is not usually needed on a normal system Package: u-boot-linaro-omap4-panda Architecture: armel armhf Depends: ${shlibs:Depends}, ${misc:Depends} Description: U-Boot bootloader binary for the TI OMAP4 Panda board This package contains the U-Boot bootloader which is responsible for loading and executing the Linux kernel on this board. This package contains the u-boot binary blob, and is not usually needed on a normal system Package: u-boot-linaro-omap4-panda-splusb Architecture: armel armhf Multi-Arch: foreign Depends: ${shlibs:Depends}, ${misc:Depends} Description: U-Boot usbspl bootloader binary for the TI OMAP4 Panda board This package contains a special purpose U-Boot bootloader for booting via a usb connection from a development host to usb peripheral connector on the Panda target. This is useful for developers and for recovering a board with bad boot media. Package: u-boot-linaro-omap4-sdp4430 Architecture: armel armhf Depends: ${shlibs:Depends}, ${misc:Depends} Description: U-Boot bootloader binary for the TI OMAP4 SDP4430 board This package contains the U-Boot bootloader which is responsible for loading and executing the Linux kernel on this board. This package contains the u-boot binary blob, and is not usually needed on a normal system Package: u-boot-linaro-origen Architecture: armel armhf Depends: ${shlibs:Depends}, ${misc:Depends} Description: U-Boot bootloader binary for the SAMSUNG ORIGEN (S5PV310) This package contains the U-Boot bootloader which is responsible for loading and executing the Linux kernel on this board. This package contains the u-boot binary blob, and is not usually needed on a normal system Package: u-boot-linaro-smdk5250 Architecture: armel armhf Depends: ${shlibs:Depends}, ${misc:Depends} Description: U-Boot bootloader binary for the SAMSUNG smdk5250 This package contains the U-Boot bootloader which is responsible for loading and executing the Linux kernel on this board. This package contains the u-boot binary blob, and is not usually needed on a normal system Package: u-boot-linaro-snowball Architecture: armel armhf Depends: ${shlibs:Depends}, ${misc:Depends} Description: U-Boot bootloader binary for the ST-Ericsson Snowball board This package contains the U-Boot bootloader which is responsible for loading and executing the Linux kernel on this board. This package contains the u-boot binary blob, and is not usually needed on a normal system Package: u-boot-linaro-vexpress-ca9x4 Architecture: armel armhf Depends: ${shlibs:Depends}, ${misc:Depends} Description: U-Boot bootloader binary for the ARM ca9x4 (Versatile Express) board This package contains the U-Boot bootloader which is responsible for loading and executing the Linux kernel on this board. This package contains the u-boot binary blob, and is not usually needed on a normal system Package: u-boot-linaro-vexpress-ca5x2 Architecture: armel armhf Depends: ${shlibs:Depends}, ${misc:Depends} Description: U-Boot bootloader binary for the ARM ca5x2 board This package contains the U-Boot bootloader which is responsible for loading and executing the Linux kernel on this board. This package contains the u-boot binary blob, and is not usually needed on a normal system debian/source/0000775000000000000000000000000012013466603010471 5ustar debian/source/format0000664000000000000000000000001412013466603011677 0ustar 3.0 (quilt) debian/changelog0000664000000000000000000007343512014772203011054 0ustar u-boot-linaro (2012.08.2-ubuntu1) quantal; urgency=low * Update to upstream 2012.08.2 git.denx.de v2012.07 base plus snowball patches accepted upstream: 9776e50 snowball: Add support for ux500 based snowball board ea02abc u8500: Moving prcmu to cpu directory 2612183 snowball: Adding architecture dependent initialisation 371a06a snowball: Adding CPU clock initialisation 3b241b1 snowball: Moving to ux500.v2 addess scheme for PRCMU access a692003 snowball: applying power to LAN and GBF controllers 42ea83d u8500: Moving processor-specific functions to cpu area. ad2192e u8500: Enabling power to MMC device on AB8500 V2 da7b6ec u8500: Separating mmc config parameters from driver 629a896 armv7: Adding cpu specific cache managmenent 90afee0 snowball: Adding board specific cache cleanup routine rebased u-boot-linaro patches from 2012.05.x: bd75391 PXE: OMAP4: add standard env vars 06e17c8 arm: omap4_panda: Enable pxecfg support 2c9ca28 SAUCE: OMAP4 Make pxe boot fallback default boot 433d266 OMAP3: Beagle: Add standard addresses to env 252c1f6 OMAP3: Beagle: Enable PXE support 6c884b7 OMAP3: igep0020: Enable PXE support 800f1e8 MX53LOCO: Enable PXE boot f5ad9a8 ARM: vexpress: move files in preparation for adding a new platform fb431df ARM: vexpress: create A9 specific board config 2fcedc0 ARM: vexpress: create A5 specific board config 89a877b ARM: vexpress: Change maintainer for ARM Versatile Express platforms 0fd9b7b ARM: vexpress: Extend default boot sequence to load script from MMC a89d0d3 net: allow setting env enetaddr from net device setting 49a3fb4 ARM: highbank: add autoboot script files d01a4c4 ARM: highbank: update autoboot bootdelay value 8719c81 Add a default env that will use boot.scr from the vfat partition 2a6e51b mx53loco: define ERRATUM_ESDHC111 99c0c6c OMAP4: avoid null pointer access in save_boot_params df4985e OMAP4: Make mmc and fat conditional in spl 51b3a85 OMAP4: Panda: Add usb peripheral boot 9637415 OMAP4: Panda: Add USB_SPL variant 8b622af OMAP4: Force PXE booting when booting via spl-usb 03e97da PXE: look for usbethaddr if no ethaddr 0470e3d OMAP4 Panda: Generate a unique usbethaddr d7f633f OMAP3: Beagle: add back boot.scr support b80fc38 OMAP4: Panda: add uEnv.txt support 09b9feb OMAP4: Enable command line editing in omap4_common.h 36ba0c6 OMAP4: change MAXARGS to 32 d2e97e7 OMAP3: Enable command line editing for omap3_beagle 9b1eb6e Allow loading of u-boot.bin for backward compatibility db1d3d5 OMAP3: Beagle: set mac addr from dieid 392394a SAUCE: HACK: move omap spl base address 8ad68ea OMAP4: add preEnv.txt support 20129db OMAP3 Beagle: add preEnv.txt support b6283d5 overo: support 200Mhz memory on 37XX 98fc296 dsuboot: fix warnings 3f0ff41 dhcp: add default weak dhcp_vendorex_{prep,proc} functions 502afac PXE: add dhcp option support for better pxe support 9f3969c Revert "armv7: adapt omap3 to the new cache maintenance framework" one new revert: 2f6410a Revert "ARM: OMAP4/5: Do not configure non essential pads, clocks, dplls." -- John Rigby Tue, 21 Aug 2012 14:41:17 -0600 u-boot-linaro (2012.05.6-ubuntu1) quantal; urgency=low * Update to upstream 2012.05.6: 2267a34 snowball: Reducing environment block size to 8K. 03174d9 omap4: panda: disable uart2 pads during boot 0e42d36 omap4: do not enable fs-usb module 2040a4f omap4: do not enable auxiliary cores f13fec5 pxe: support include files at top-level e539d11 pxe: add support for label menu text a0854ad pxe: support linux entries for labels ae97aaf pxe: support absolute paths 36f306c pxe: parse initrd file from append string cfb48a3 pxe: add support for parsing local syslinux files 2c872ca dhcp: add default weak dhcp_vendorex_{prep,proc} functions dc80e00 PXE: add dhcp option support for better pxe support * Update packaging: Include omap4_panda_usbspl binaries in omap4_panda pkg Update debian/copyright to point to git.linaro.org repo -- John Rigby Thu, 09 Aug 2012 16:25:39 -0600 u-boot-linaro (2012.05.3-ubuntu1) quantal; urgency=low * Update to upstream 2012.05.3 which contains snowball support -- John Rigby Tue, 22 May 2012 23:02:53 -0600 u-boot-linaro (2012.05.1-ubuntu1) quantal; urgency=low * Automatically use gcc-4.7 or 4.5 depending on what is installed * Update to upstream 2012.05.1 -- John Rigby Wed, 02 May 2012 23:05:02 -0600 u-boot-linaro (2012.04.2-ubuntu1) precise; urgency=low * Update to upstream 2012.04.2 which is based on denx upstream v2012.04.1 * Add MLO and u-boot.img to install targets for overo -- John Rigby Wed, 25 Apr 2012 08:04:13 -0600 u-boot-linaro (2012.04.1-ubuntu1) precise; urgency=low * Update to upstream 2012.04.1 which is based on denx upstream v2012.04 -- John Rigby Mon, 23 Apr 2012 08:19:41 -0600 u-boot-linaro (2012.02.3-ubuntu1) precise; urgency=low * Update to upstream 2012.02.3 u-boot-linaro which includes patch to correct memory size on rev C4 Beagle. (LP: #928580). -- John Rigby Mon, 02 Apr 2012 10:53:32 -0600 u-boot-linaro (2012.02.2-ubuntu2) precise; urgency=low * Mark u-boot-linaro-omap4-panda-splusb for Multi-Arch: foreign, so that this can be installed on non-arm hosts for USB-booting ARM boards. (LP: #956037). -- Robie Basak Thu, 15 Mar 2012 14:08:11 +0000 u-boot-linaro (2012.02.2-ubuntu1) precise; urgency=low * Update to upstream 2012.02.2 u-boot-linaro [ John Rigby ] * SAUCE: Snowball: init serial later * MMC: arm_pl180_mmci: allow multiple devices * OMAP3 Beagle and OMAP4: add preEnv.txt support (LP: 932436) [ Rob Herring ] * net: allow setting env enetaddr from net device setting * net: add Calxeda xgmac driver * ARM: highbank: enable networking and pxe * ARM: highbank: Add boot counter support * ARM: highbank: add reset support * ARM: highbank: setup env from boot source register * ARM: highbank: change TEXT_BASE to 0x8000 * ARM: highbank: add autoboot script files * ARM: highbank: fix us_to_tick calculation * ARM: highbank: update autoboot bootdelay value [ Jason Hobbs ] * configs/highbank.h: point at env in nvram * configs/highbank.h: correct the fdt_addr env variable [ Robie Basak ] * OMAP4: Force PXE booting when booting via spl-usb (LP: 927956) -- John Rigby Thu, 16 Feb 2012 10:06:35 -0700 u-boot-linaro (2012.01.1-ubuntu1) precise; urgency=low * Releasing 2012.01.1 to Ubuntu precise -- John Rigby Thu, 19 Jan 2012 18:25:53 -0700 u-boot-linaro (2012.01.1-ubuntu1~ppa) oneiric; urgency=low * Update to upstream 2012.01.1 u-boot-linaro which Is rebased on final Denx upstream v2011.12 Fixes usb peripheral booting on omap4-panda (LP: #911377) Fixes efikamx build (LP: #906478) Adds preliminary mx6qsabrelite support from FSL LT Adds preliminary smdk5250 support from Samsung LT Adds buildable but untested snowball support from STE LT * Add armhf to control file -- John Rigby Thu, 19 Jan 2012 17:49:35 -0700 u-boot-linaro (2011.12.2-ubuntu1~ppa~oneiric) oneiric; urgency=low * Update to upstream 2011.12.2 u-boot-linaro * Add u-boot.img and MLO to omap3_beagle install files -- John Rigby Mon, 19 Dec 2011 22:30:51 -0700 u-boot-linaro (2011.12.1-ubuntu1~ppa~oneiric) oneiric; urgency=low * Update to upstream 2011.12.1 u-boot-linaro * Add mx6qarm2 (Armadillo2) board -- John Rigby Sun, 18 Dec 2011 22:47:23 -0700 u-boot-linaro (2011.11.2-ubuntu1~ppa~oneiric) oneiric; urgency=low * Enable mx53ard, packaging only change enabling mx53ard target -- John Rigby Tue, 22 Nov 2011 11:00:14 -0700 u-boot-linaro (2011.11.2-ppa~oneiric1) oneiric; urgency=low * Update to new upstream Adds default env for Samsung Origen board (LP: #893459) -- John Rigby Mon, 21 Nov 2011 23:38:24 -0700 u-boot-linaro (2011.11.1-0ubuntu2~ppa~oneiric) oneiric; urgency=low * Packaging changes only origen: add origen-spl.bin to debian/platforms-debs-targets modify debian/rules to deal correctly with targets that include a / panda-splusb: add u-boot-linaro-omap4-panda-splusb to debian/control -- John Rigby Thu, 17 Nov 2011 09:35:40 -0700 u-boot-linaro (2011.11.1-0ubuntu1~ppa~oneiric) oneiric; urgency=low * New upstream release 2011.11.1 which includes omap4 usb spl booting Reformat debian/platforms-debs-targets columns for longer target names Added origen and omap4_panda_splusb to platforms-debs-targets Fix ca5x2 deb name and add origen to control file -- John Rigby Wed, 16 Nov 2011 10:29:39 -0700 u-boot-linaro (2011.10.2-0ubuntu1~ppa~oneiric) oneiric; urgency=low * New upstream release 2011.10.2 OMAP3: Beagle: set mac address from die id OMAP3: Beagle: enable PXE support OMAP3: Igep0020: enable PXE support i.MX53: MX53loco aka quickstart: enable PXE support -- John Rigby Mon, 24 Oct 2011 00:45:42 -0600 u-boot-linaro (2011.10.1-0ubuntu3~ppa~oneiric) oneiric; urgency=low * Packaging change only, add new plats for control file -- John Rigby Fri, 21 Oct 2011 04:15:13 -0600 u-boot-linaro (2011.10.1-0ubuntu2~ppa~oneiric) natty; urgency=low * Packaging change only, add new plats for control file -- John Rigby Fri, 21 Oct 2011 03:59:45 -0600 u-boot-linaro (2011.10.1-0ubuntu1) oneiric; urgency=low * New upstream release 2011.10.1 Previous release rebased to upstream v2011.09 final New commits from FSL LT: mx53loco: add support for MC34708 New commits from ARM LT: MMC: PL180: Fix infinite loop with VExpress extended fifo implementation ARM: vexpress: move files in preparation for adding a new platform ARM: vexpress: create A9 specific board config ARM: vexpress: create A5 specific board config ARM: vexpress: Change maintainer for ARM Versatile Express platforms -- John Rigby Fri, 21 Oct 2011 03:20:05 -0600 u-boot-linaro (2011.09.6-0ubuntu1) oneiric; urgency=low * omap4: reduce default operating point for 4460 devices Reduce the operating point for 4460 to OPP100 (MPU at 700MHz) (LP: #867670) From bug report: With both A9 cores loaded 4460 reaches max temperature in about 30s at the current operating point of 930MHz. The operating point should be lowered to 700MHz. It appears the panda heats more than I thought (and much more that the blaze), and by loading the 2 cores I can quite easily reach max temperature at 920MHz (it takes around 30s on my board!). At 700MHz, the temperature still increases but much slower. So if the A9 cores do not run at 100% all the time we shall be ok. So for now, we definitely need this change if we don't want to run with a heatsink... * mmc: omap: enable high capacity Enable high capacity to host capability. Fixes eMMC detection on boot from MMC/SD card. mmc: omap: config VMMC, MMC1_PBIAS Config VMMC voltage to 3V for MMC/SD card slot and PBIAS settings needed for OMAP4 (LP: #867650) -- John Rigby Wed, 05 Oct 2011 17:17:34 -0600 u-boot-linaro (2011.09.5-0ubuntu1) oneiric; urgency=low * FFe: u-boot-linaro 11.09, misc fixes for new silicon and boards (LP: #851974) mmc: omap: enable high capacity mmc: omap: config VMMC, MMC1_PBIAS omap4: fix pad configuration settings for SDP and Panda omap4: make SDRAM init work for ES1.0 silicon omap4: IO settings pxe: make the first label the implicit default OMAP4: removing fdt_addr from the default env U-Boot/SPL: omap4: Make ddr pre-calculated timings as default. (LP: #837235) Revert "armv7: adapt omap3 to the new cache maintenance framework" (LP: #862013) -- John Rigby Thu, 29 Sep 2011 00:40:24 -0600 u-boot-linaro (2011.08.6-0ubuntu2) oneiric; urgency=low * FFe: enabling build and package for OMAP4 SDP4430 (LP: #839615) -- Ricardo Salveti de Araujo Fri, 02 Sep 2011 10:10:40 -0300 u-boot-linaro (2011.08.6-0ubuntu1) oneiric; urgency=low * Allow loading of u-boot.bin as well as u-boot.img Feature freeze exception (LP: #836748) -- John Rigby Mon, 29 Aug 2011 09:15:47 -0600 u-boot-linaro (2011.08.5-0ubuntu1) oneiric; urgency=low * Same upstream, new upload for oneiric. Feature freeze exception (LP: #833876) -- John Rigby Thu, 25 Aug 2011 10:21:43 -0600 u-boot-linaro (2011.08.5-0ubuntu1~ppa~natty1) natty; urgency=low * New upstream 2011.08.3 - arm: do not force d-cache enable on all boards -- John Rigby Wed, 24 Aug 2011 10:21:48 -0600 u-boot-linaro (2011.08.4-0ubuntu1~ppa~natty1) natty; urgency=low * No upstream changes. Packaging changes to give better control of build and install targets. Add new column to platforms-debs-targets to add explicit install file list. Use '-' in build target column to mean default. Add comments to document columns. The result of all this is that no extra files get copied to the .deb file. -- John Rigby Fri, 19 Aug 2011 09:55:47 -0600 u-boot-linaro (2011.08.4-0ubuntu1~ppa~natty) natty; urgency=low * New upstream 2011.08.3 - OMAP4 Panda: reapplying panda specific mux changes -- John Rigby Thu, 18 Aug 2011 23:58:41 -0600 u-boot-linaro (2011.08.3-0ubuntu1~ppa~natty) natty; urgency=low * New upstream 2011.08.3 which fixes booting problems on OMAP3 - Revert "armv7: adapt omap3 to the new cache maintenance framework" -- John Rigby Thu, 18 Aug 2011 15:25:26 -0600 u-boot-linaro (2011.08.1-0ubuntu1~ppa~natty) natty; urgency=low * New upstream 2011.08.1 which includes - MLO for OMAP4 Panda comes from u-boot's new spl feature - PXE is now backup default boot for OMAP4 Panda (LP: #826877, #820121) - Change MAXARGS for Panda to 32 (LP: #820116) - pxecfg: Prefix MAC-based requests with "01-" (LP: #827705) - net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back (LP: #817315) * Rename platform-and-targets to debian/platforms-debs-targets and rearrange to have target column which is now optional last. Modify rules to only use target on make invocation when it exists. This means that targets only the mx targets need the u-boot.imx target since the u-boot build system does NOT just do the right thing without it. Also skip lines in platforms-debs-targets that begin with # to allow for comments. -- John Rigby Wed, 17 Aug 2011 09:09:17 -0600 u-boot-linaro (2011.07.2-0ubuntu1~natty1) natty; urgency=low * New upstream 2011.07.1 which includes Add uboot "fdt_high" enviroment variable (LP: #707047) Fix typo from 'mb_alloc' -> 'lmb_alloc' -- John Rigby Mon, 25 Jul 2011 16:31:28 -0600 u-boot-linaro (2011.07.1-0ubuntu1) oneiric; urgency=low * New upstream 2011.07.1 which includes - PXE FDT fix from previous ubuntu release so patch has been removed - Added missing PXE env vars (LP: #808815) - Generated unique usbethaddr (LP: #809015) - Modify pxe command to look for usbethaddr if ethaddr is NULL -- John Rigby Wed, 13 Jul 2011 23:31:39 -0600 u-boot-linaro (2011.06.5-0ubuntu2) oneiric; urgency=low * debian/patches/0001-cmd_pxecfg-only-call-do_bootm-with-argc-4-if-fdtaddr.patch: - Fix PXE when built with FDT but without loading it at runtime (LP: #808612) -- Ricardo Salveti de Araujo Mon, 11 Jul 2011 02:13:14 -0300 u-boot-linaro (2011.06.5-0ubuntu1) oneiric; urgency=low * Use gcc 4.5 since usb fails with 4.6 Adding CC= on make command line this time so it actually works * New upstream 2011.06.5 which includes omap3_beagle: enable the use of a plain text file OMAP3: Beagle: add back boot.scr support OMAP4: Panda: add uEnv.txt support OMAP: enable command line editing for panda and beagle -- John Rigby Fri, 01 Jul 2011 10:50:40 +0100 u-boot-linaro (2011.06.4-0ubuntu1) oneiric; urgency=low * Use gcc 4.5 since usb fails with 4.6 * New upstream 2011.06.4 which includes New PXE stuff from Calxeda highbank soc/board support from Calxeda EHCI timeout recovery -- John Rigby Wed, 29 Jun 2011 16:19:20 +0100 u-boot-linaro (2011.06.3-0ubuntu1~natty1) natty; urgency=low * New upstream release U-Boot 2011.06.3 With reverted patch that replaced reading boot.scr * Add mx53loco to control file -- John Rigby Wed, 29 Jun 2011 01:11:31 +0100 u-boot-linaro (2011.06.2-0ubuntu1~natty2) natty; urgency=low * Add mx53loco to control file -- John Rigby Wed, 29 Jun 2011 00:38:30 +0100 u-boot-linaro (2011.06.2-0ubuntu1~natty1) natty; urgency=low * New upstream release U-Boot 2011.06.2 Based on git.denx.de version v2011.06 final * Add mx53loco target -- John Rigby Tue, 28 Jun 2011 21:23:41 +0100 u-boot-linaro (2011.06.1-0ubuntu1) oneiric; urgency=low * New upstream release U-Boot 2011.06.1 Based on git.denx.de version v2011.06-rc3 -- John Rigby Wed, 22 Jun 2011 16:06:36 -0600 u-boot-linaro (2011.04.2-0ubuntu1) natty; urgency=low * New upstream release U-Boot 2011.04.2. Feature freeze exception: 2011.03 doesn't boot anymore on Beagle B5. LP: #760350. -- John Rigby Tue, 19 Apr 2011 09:30:23 -0600 u-boot-linaro (2011.04.1-0ubuntu1) natty; urgency=low * New upstream release Linaro U-Boot 2011.04.1. Feature freeze exception: FDT support for all supported platforms for Linaro 11.05. LP: #760244. Changes since 2011.03.2: [ John Rigby ] * Merge upstream git.denx.de v2011.03 [ Grant Likely ] * Stop passing around bootmem_base value. * Default to bootm_size() when CONFIG_SYS_BOOTMAPSZ is not defined * Remove device tree booting dependency on CONFIG_SYS_BOOTMAPSZ * Fix off-by-one error in passing initrd end address via device tree * Respect memreserve regions specified in the device tree * Add CONFIG_OF_LIBFDT to more boards. [ Steve Sakoman ] * ARMV7: Overo: Automatically set clock rate to maximum if mpurate env variable is "auto" [ Jason Liu ] * mx53loco: set mmc env to MMC slot1 * MX5: Enable flat-device-tree support on mx53 loco board * fsl_esdhc: Fix multi-block read restriction on i.MX53 eSDHCv2 -- John Rigby Tue, 05 Apr 2011 22:12:45 -0600 u-boot-linaro (2011.03.2-0ubuntu1) natty; urgency=low * New upstream release Linaro U-Boot 2011.03.2. Changes since 2011.02.1: 146 commits: 79 commits changing touching non ARM ARCH's 13 Merge commits (actual changes accounted for in other commits) 10 USB commits not touching any code of a Linaro supported platform 18 commits to ARM platforms not supported by Linaro 10 Common fixes: cmd_bmp.c: message about compressed formats is debug info only. itest: fix result of string compares unzip: return uncompressed size in `filesize', and print it. change email address in MAINTAINERS net: ne2000: Add spport RTL-8019AS add checking the CONFIG_ENV_IS_IN_SPI_FLASH in Enbedded env Fix compile warning in net/eth.c NAND: Fix saving of redundand environment NAND: env: remember the flags used in the previous environment Fix build warnings in cmd_flash.c All reviewed by John Rigby 16 commits changing files in Linaro supported platforms ARM: fix write*() I/O accessors ARM: Update mach-types Signed-off-by: Sandeep Paulraj EfikaMX: switch to MACH_TYPE_MX51_EFIKAMX Signed-off-by: Loïc Minier ARM: OMAP3: Revamp IGEP v2 default configuration ARM: OMAP3: Revamp IGEP module default configuration Signed-off-by: Loïc Minier Signed-off-by: Enric Balletbo i Serra Fixes LP Bug #716540 Makefile: change rule to build IMX image Signed-off-by: Stefano Babic MX51: drop config.mk from mx51evk Signed-off-by: Stefano Babic MX53: drop config.mk from mx53evk Signed-off-by: Jason Liu EfikaMX: Add imximage config for Efika SB EfikaSB: Add preliminary EfikaSB support EfikaMX: Enable EXT2 booting Better Efika support Requested-by: Loïc Minier MX53: support for freescale MX53LOCO board Signed-off-by: Jason Liu MX5: Enable flat-device-tree support on mx51/53 evk board Signed-off-by: Jason Liu MMC: Max blocks value adjustable MMC: Add support for PL180 ARM mmc device ARMV7: Vexpress: Add MMC support Adds mmc support for Vexpress Fixes LP Bug #730813 Signed-off-by: Matt Waddel efikamx: add default env and bootcommand Signed-off-by: John Rigby -- John Rigby Mon, 21 Mar 2011 11:30:07 -0600 u-boot-linaro (2011.02.1-0ubuntu1) natty; urgency=low * New upstream release Linaro U-Boot 2011.02.1 which is based on git.denx.de v2011.03-rc1. * Add u-boot-linaro-efikamx package shipping u-boot.bin. * Add absolute path to target in debian/rules as required by u-boot build system when using O=. -- John Rigby Tue, 08 Feb 2011 16:57:37 -0700 u-boot-linaro (2010.12-0ubuntu2) natty; urgency=low * Add u-boot-linaro-igep0020 package shipping u-boot.bin for the igep0020 config (IGEPv2 boards). -- Loïc Minier Thu, 27 Jan 2011 17:35:02 +0100 u-boot-linaro (2010.12-0ubuntu1) natty; urgency=low * Merge upstream v2010.12 - LP: 678398 - LP: 680095 - LP: 680372 - LP: 684585 * No longer force gcc-4.4 - LP: 691220 * Remove -Bsymbolic-functions from LDFLAGS in debian/rules -- John Rigby Tue, 04 Jan 2011 09:01:45 -0700 u-boot-linaro (2010.09~rc1.1-0ubuntu6) natty; urgency=low * Pass CC to make to force gcc-4.4. -- Loïc Minier Thu, 16 Dec 2010 01:40:01 +0100 u-boot-linaro (2010.09~rc1.1-0ubuntu5) natty; urgency=low * Build with gcc-4.4 for now as 4.5 breaks u-boot for some reason. -- Loïc Minier Wed, 15 Dec 2010 22:54:03 +0100 u-boot-linaro (2010.09~rc1.1-0ubuntu4) natty; urgency=low * Add Gumstix Overo, omap3_overo. * Cleanup rules. * Fix clean to remove some files which upstream creates in the source tree. * List platform and targets in debian/platform-and-targets. -- Loïc Minier Fri, 03 Dec 2010 15:44:02 +0100 u-boot-linaro (2010.09~rc1.1-0ubuntu3) maverick; urgency=low [ Steve Sakoman ] * ARMV7: OMAP4: Fix Panda pinmux setting to enable Wifi/BT Module - LP: #645167 -- John Rigby Wed, 22 Sep 2010 12:42:39 -0600 u-boot-linaro (2010.09~rc1.1-0ubuntu2) maverick; urgency=low [ John Rigby ] * Update upstream base to v2010.09-rc1 * Update Vcs-Git: git://git.linaro.org/boot/u-boot-linaro-stable.git * Eliminate quilt and rsync build dependencies * Remove linaro from package version string * There were 90 commits between previous upstream and this. Of these: 24 armv7/omap patches Signed-off-by: Steve Sakoman These replace Linaro local versions of these patches 1 touches common I2C code CMD_I2C: make alen=0 work Signed-off-by: Reinhard Meyer bug fix for i2c command 1 touches device tree code which is not yet supported on arm fdt: call fdt_parent_offset fewer times while translating addresses Signed-off-by: Scott Wood Signed-off-by: Kumar Gala 1 touches Maintainers file MX51: Update responsible for mx51evk Signed-off-by: Stefano Babic 1 does fixes coding style and whitespace issues Prepare v2010.09-rc1 Signed-off-by: Wolfgang Denk 9 armv7 patches that do not touch common code Samsung 24 arm but not armv7 Atmel, Fujitsu and Marvell 29 other arches powerpc, nios, sh, avr32, mips * Change license in debian/copyright to GPL V2 only - LP: #624499 * Add debian/source/format to quiet lintian [ Matt Waddel ] * Support second bank of flash on vexpress - LP: #637780 -- John Rigby Wed, 15 Sep 2010 10:51:58 -0600 u-boot-linaro (2010.06-695-gbd23130-linaro-0ubuntu1) maverick; urgency=low Feature freeze exception for new package (LP: #624330) [ John Rigby ] * Build one deb per target [ Steve Langasek ] * Use Ubuntu-appropriate version numbering * Add a Vcs-Git field to document the link back to the source repository -- Steve Langasek Thu, 26 Aug 2010 00:35:29 +0000 u-boot-linaro (v2010.06-695-gbd23130-linaro-3) maverick; urgency=low * Add rsync as a build dependency -- John Rigby Wed, 25 Aug 2010 09:09:49 -0600 u-boot-linaro (v2010.06-695-gbd23130-linaro-2) maverick; urgency=low * New upstream v2010.06-695-gbd23130 * Updated ssakoman patches v2010.06-714-g33b8b43 Mans Rullgard (3): ARMV7: OMAP3: Fix and clean up L2 cache enable/disable functions ARMV7: OMAP3: Convert setup_auxcr() to pure asm ARMV7: OMAP3: Apply Cortex-A8 errata workarounds only on affected revisions Steve Sakoman (16): ARMV7: OMAP: Move syslib.c to omap-common since it can be shared by OMAP3 and OMAP4 ARMV7: OMAP: add convenience function to set TWL4030 regulator voltages ARMV7: OMAP: Enable input driver on Overo's MMC1_CLK and MMC3_CLK pinmux setup ARMV7: OMAP: Add mpurate boot arg for Overo and Beagle ARMV7: OMAP: Add board revision detection for Overo ARMV7: OMAP: Add detection and support for Beagle C4 revision ARMV7: OMAP: Configure Overo's second network chip ARMV7: OMAP3: Update CPU type detection for AM35XX/OMAP36XX/37XX ARMV7: OMAP3: Add clock setup for OMAP36XX/37XX ARMV7: OMAP3: sdrc: remove hard coding sdram setup for 128MB/bank mtd: nand: honor CONFIG_SYS_NAND_QUIET_TEST with unknown NAND printk ARMV7: OMAP3: Add CONFIG_SYS_NAND_QUIET_TEST to Beagle and Overo configs ARMV7: OMAP3: Add support for Beagle xM ARMV7: OMAP: Add spi driver for OMAP3/OMAP4 NET: Add driver for Micrel KS8851 ARMV7: Add Micrel KS8851 net chip support to OMAP4430 SDP * Same versatile express patches from Matt Waddel as before. * Updated packaging to include platform specific install targets -- John Rigby Mon, 23 Aug 2010 22:54:44 -0600 u-boot-linaro (v2010.06-265-gcdb7497-linaro-1) maverick; urgency=low * Initial Linaro u-boot tree based on * Upstream v2010.06-265-gcdb7497 * A series of patches from ssakomans exp branch that add support for beagle C4 and xM. These have been rebased onto current upstream. The gitorious beagle trees are still based on v2010.03. These patches will be replaced with patches from ssakoman. * Versatile express patches from Matt Waddel. * Debian packaging by John Rigby based on the lucid u-boot-omap3 package. * Currently builds u-boot binaries for these platforms ca9x4_ct_vxp aka Versatile Express mx51evk aka Babbage omap4_panda omap3_beagle -- John Rigby Fri, 06 Aug 2010 16:20:43 -0600 debian/platforms-debs-targets0000664000000000000000000000271712013466603013514 0ustar # # config target: # an _config gets tacked on and used for the u-boot config # # package name: # underscores are not allowed in debian package names so # this is normally just config target with underscores replaced # with dashes # # build target: # some targets do not do the right thing unless asked explicitly # specifically one must specify u-boot.imx for mx5x # use - for the case where no target should be passed # # install target(s): # list of files to include in deb # # config package build install # target name target target(s) # efikamx efikamx u-boot.imx u-boot.imx highbank highbank - u-boot.bin igep0020 igep0020 - u-boot.bin mx51evk mx51evk u-boot.imx u-boot.imx mx53ard mx53ard u-boot.imx u-boot.imx mx53loco mx53loco u-boot.imx u-boot.imx mx6qarm2 mx6qarm2 u-boot.imx u-boot.imx mx6qsabrelite mx6qsabrelite u-boot.imx u-boot.imx omap3_overo omap3-overo - MLO u-boot.img u-boot.bin omap3_beagle omap3-beagle - MLO u-boot.img u-boot.bin omap4_panda omap4-panda - MLO u-boot.img u-boot.bin omap4_panda_splusb omap4-panda-splusb - MLO u-boot.img u-boot.bin spl/u-boot-spl.bin omap4_sdp4430 omap4-sdp4430 - MLO u-boot.img u-boot.bin origen origen - u-boot.bin spl/origen-spl.bin smdk5250 smdk5250 - u-boot.bin spl/smdk5250-spl.bin snowball snowball - u-boot.bin vexpress_ca9x4 ca9x4-ct-vxp - u-boot.bin vexpress_ca9x4 vexpress-ca9x4 - u-boot.bin vexpress_ca5x2 vexpress-ca5x2 - u-boot.bin debian/README.source0000664000000000000000000000053212013466603011350 0ustar Linaro u-boot ------------- This package uses quilt to manage all modifications to the upstream source. Changes are stored in the source package as diffs in debian/patches and applied during the build. Please see: /usr/share/doc/quilt/README.source for more information on how to apply the patches, modify patches, or remove a patch. debian/copyright0000664000000000000000000000304412013466603011125 0ustar This work was originally packaged for Debian by: Oliver Grawert on Mon, 22 Mar 2010 15:06:23 +0200 It was downloaded from: http://git.linaro.org/gitweb?p=boot/u-boot-linaro-stable.git;a=shortlog;h=refs/heads/master Upstream Authors: Wolfgang Denk, DENX Software Engineering, wd@denx.de. Steve Sakoman countless others Copyright: Copyright (C) 2000-2012 Wolfgang Denk, DENX Software Engineering, wd@denx.de. License: This package is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License version 2 as published by the Free Software Foundation. This package is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this package; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA On Debian systems, the complete text of the GNU General Public License version 2 can be found in `/usr/share/common-licenses/GPL-2'. The Debian packaging is: Copyright (C) 2010 Oliver Grawert you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. debian/rules0000775000000000000000000000640512013466603010256 0ustar #!/usr/bin/make -f # the upstream build passes LDFLAGS directly to ld instead of calling gcc for # linking; so instead of passing -Wl,foo in LDFLAGS as in automake builds, one # should set LDFLAGS to foo directly comma := , LDFLAGS := $(patsubst -Wl$(comma)%,%,$(LDFLAGS)) # remove -Bsymbolic-functions from LDFLAGS because is messes up ld and some # initializations end up being zero LDFLAGS := $(patsubst -Bsymbolic-functions,,$(LDFLAGS)) DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) ifneq ($(DEB_BUILD_GNU_TYPE),$(DEB_HOST_GNU_TYPE)) export CROSS_COMPILE?=$(DEB_HOST_GNU_TYPE)- endif deb_source := $(shell dpkg-parsechangelog | sed -n 's/^Source: //p') deb_version := $(shell dpkg-parsechangelog | sed -n 's/^Version: //p') upstream_version := $(shell echo '$(deb_version)' | sed 's/.*://; s/-[^-]*$$//') # u-boot has build errors with 4.6, 4.5 and 4.7 work fine export CC= ifeq ($(strip $(CC)),) ifneq ($(strip $(shell $(CROSS_COMPILE)gcc-4.7.1 -dumpversion 2>/dev/null || true)),) export CC=$(CROSS_COMPILE)gcc-4.7.1 endif endif ifeq ($(strip $(CC)),) ifneq ($(strip $(shell $(CROSS_COMPILE)gcc-4.7 -dumpversion 2>/dev/null || true)),) export CC=$(CROSS_COMPILE)gcc-4.7 endif endif ifeq ($(strip $(CC)),) ifneq ($(strip $(shell $(CROSS_COMPILE)gcc-4.5 -dumpversion 2>/dev/null || true)),) export CC=$(CROSS_COMPILE)gcc-4.5 endif endif # --remote doesn't work with git.linaro.org so this needs to be # run from a local checkout get-orig-source: rm -rf $(deb_source)-$(upstream_version) rm -f $(deb_source)-$(upstream_version).orig.tar.gz git clone --depth 1 git://git.linaro.org/boot/u-boot-linaro-stable.git $(deb_source)-$(upstream_version) cd $(deb_source)-$(upstream_version) && git archive \ --format=tar \ --prefix=$(deb_source)-$(upstream_version)/ \ $(upstream_version) \ | gzip >../$(deb_source)_$(upstream_version).orig.tar.gz rm -rf $(deb_source)-$(upstream_version) %: dh --with quilt $@ override_dh_auto_clean: # upstream only cleans these files if passing the right O=, but it # shouldn't create these the source tree in the first place # XXX this hardcodes "arm" rm -f arch/arm/include/asm/arch arch/arm/include/asm/proc rm -rf debian/build override_dh_auto_build: echo building using $(CC) while read plat deb buildtarget ignoreinstalltargets; do \ expr $$plat : "^#" > /dev/null && continue; \ mkdir -p debian/build/$$plat; \ $(MAKE) O=$$PWD/debian/build/$$plat $${plat}_config; \ test "$$buildtarget" = "-" && $(MAKE) CC="$(CC)" O=$$PWD/debian/build/$$plat; \ test "$$buildtarget" != "-" && $(MAKE) CC="$(CC)" O=$$PWD/debian/build/$$plat \ $$PWD/debian/build/$$plat/$$buildtarget; \ true; \ done /dev/null && continue; \ for target in $$installtargets; do \ mkdir -p debian/u-boot-linaro-$$deb/usr/lib/u-boot/$$plat/; \ test -e debian/build/$$plat/$$target && \ install -m644 \ -t debian/u-boot-linaro-$$deb/usr/lib/u-boot/$$plat/ \ debian/build/$$plat/$$target; \ done; \ true; \ done