--- x11proto-print-1.0.5.orig/autogen.sh +++ x11proto-print-1.0.5/autogen.sh @@ -0,0 +1,12 @@ +#! /bin/sh + +srcdir=`dirname $0` +test -z "$srcdir" && srcdir=. + +ORIGDIR=`pwd` +cd $srcdir + +autoreconf -v --install || exit 1 +cd $ORIGDIR || exit $? + +$srcdir/configure --enable-maintainer-mode "$@" --- x11proto-print-1.0.5.orig/aclocal.m4 +++ x11proto-print-1.0.5/aclocal.m4 @@ -1,7 +1,7 @@ -# generated automatically by aclocal 1.11.1 -*- Autoconf -*- +# generated automatically by aclocal 1.10.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +# 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -13,13 +13,75 @@ m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],, -[m4_warning([this file was generated for autoconf 2.68. +m4_if(AC_AUTOCONF_VERSION, [2.61],, +[m4_warning([this file was generated for autoconf 2.61. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'.])]) -# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +dnl Copyright 2005 Red Hat, Inc +dnl +dnl Permission to use, copy, modify, distribute, and sell this software and its +dnl documentation for any purpose is hereby granted without fee, provided that +dnl the above copyright notice appear in all copies and that both that +dnl copyright notice and this permission notice appear in supporting +dnl documentation. +dnl +dnl The above copyright notice and this permission notice shall be included +dnl in all copies or substantial portions of the Software. +dnl +dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. +dnl IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR +dnl OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, +dnl ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +dnl OTHER DEALINGS IN THE SOFTWARE. +dnl +dnl Except as contained in this notice, the name of the copyright holders shall +dnl not be used in advertising or otherwise to promote the sale, use or +dnl other dealings in this Software without prior written authorization +dnl from the copyright holders. +dnl + +# XORG_RELEASE_VERSION +# -------------------- +# Adds --with/without-release-string and changes the PACKAGE and +# PACKAGE_TARNAME to use "$PACKAGE{_TARNAME}-$RELEASE_VERSION". If +# no option is given, PACKAGE and PACKAGE_TARNAME are unchanged. Also +# defines PACKAGE_VERSION_{MAJOR,MINOR,PATCHLEVEL} for modules to use. + +AC_DEFUN([XORG_RELEASE_VERSION],[ + AC_ARG_WITH(release-version, + AC_HELP_STRING([--with-release-version=STRING], + [Use release version string in package name]), + [RELEASE_VERSION="$withval"], + [RELEASE_VERSION=""]) + if test "x$RELEASE_VERSION" != "x"; then + PACKAGE="$PACKAGE-$RELEASE_VERSION" + PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION" + AC_MSG_NOTICE([Building with package name set to $PACKAGE]) + fi + AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MAJOR], + [`echo $PACKAGE_VERSION | cut -d . -f 1`], + [Major version of this package]) + PVM=`echo $PACKAGE_VERSION | cut -d . -f 2 | cut -d - -f 1` + if test "x$PVM" = "x"; then + PVM="0" + fi + AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MINOR], + [$PVM], + [Minor version of this package]) + PVP=`echo $PACKAGE_VERSION | cut -d . -f 3 | cut -d - -f 1` + if test "x$PVP" = "x"; then + PVP="0" + fi + AC_DEFINE_UNQUOTED([PACKAGE_VERSION_PATCHLEVEL], + [$PVP], + [Patch version of this package]) +]) + +# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -31,10 +93,10 @@ # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.11' +[am__api_version='1.10' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.11.1], [], +m4_if([$1], [1.10.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) @@ -48,12 +110,12 @@ # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.11.1])dnl +[AM_AUTOMAKE_VERSION([1.10.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) +_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- @@ -108,314 +170,16 @@ am_aux_dir=`cd $ac_aux_dir && pwd` ]) -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 9 - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ(2.52)dnl - ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE])dnl -AC_SUBST([$1_FALSE])dnl -_AM_SUBST_NOTMAKE([$1_TRUE])dnl -_AM_SUBST_NOTMAKE([$1_FALSE])dnl -m4_define([_AM_COND_VALUE_$1], [$2])dnl -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 10 - -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "GCJ", or "OBJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], UPC, [depcc="$UPC" am_compiler_list=], - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - am__universal=false - m4_case([$1], [CC], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac], - [CXX], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac]) - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES -AC_DEFUN([AM_SET_DEPDIR], -[AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE(dependency-tracking, -[ --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH])dnl -_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -#serial 5 - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[{ - # Autoconf 2.62 quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each `.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. +# 2005, 2006, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 16 +# serial 13 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. @@ -432,7 +196,7 @@ # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.62])dnl +[AC_PREREQ([2.60])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl @@ -483,8 +247,8 @@ AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) -AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AM_PROG_INSTALL_SH +AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. @@ -492,37 +256,24 @@ AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES(OBJC)], - [define([AC_PROG_OBJC], - defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl + [_AM_DEPENDENCIES(OBJC)], + [define([AC_PROG_OBJC], + defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl ]) -_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl -dnl The `parallel-tests' driver may need to know about EXEEXT, so add the -dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro -dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. -AC_CONFIG_COMMANDS_PRE(dnl -[m4_provide_if([_AM_COMPILER_EXEEXT], - [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl ]) -dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not -dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further -dnl mangled by Autoconf and run in a shell conditional statement. -m4_define([_AC_COMPILER_EXEEXT], -m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) - # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header @@ -545,7 +296,7 @@ done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -556,14 +307,7 @@ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi +install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. @@ -587,108 +331,16 @@ rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) -# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- -# From Jim Meyering - -# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 5 - -# AM_MAINTAINER_MODE([DEFAULT-MODE]) -# ---------------------------------- -# Control maintainer-specific portions of Makefiles. -# Default is to disable them, unless `enable' is passed literally. -# For symmetry, `disable' may be passed as well. Anyway, the user -# can override the default with the --enable/--disable switch. -AC_DEFUN([AM_MAINTAINER_MODE], -[m4_case(m4_default([$1], [disable]), - [enable], [m4_define([am_maintainer_other], [disable])], - [disable], [m4_define([am_maintainer_other], [enable])], - [m4_define([am_maintainer_other], [enable]) - m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) -AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles]) - dnl maintainer-mode's default is 'disable' unless 'enable' is passed - AC_ARG_ENABLE([maintainer-mode], -[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful - (and sometimes confusing) to the casual installer], - [USE_MAINTAINER_MODE=$enableval], - [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) - AC_MSG_RESULT([$USE_MAINTAINER_MODE]) - AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) - MAINT=$MAINTAINER_MODE_TRUE - AC_SUBST([MAINT])dnl -] -) - -AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) - -# Check to see how 'make' treats includes. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 4 - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from `make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) - # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 6 +# serial 5 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ @@ -705,14 +357,7 @@ AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " @@ -750,13 +395,13 @@ # Helper functions for option handling. -*- Autoconf -*- -# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. +# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 4 +# serial 3 # _AM_MANGLE_OPTION(NAME) # ----------------------- @@ -773,7 +418,7 @@ # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], -[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) +[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- @@ -783,14 +428,14 @@ # Check to make sure that the build environment is sane. -*- Autoconf -*- -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 5 +# serial 4 # AM_SANITY_CHECK # --------------- @@ -799,29 +444,16 @@ # Just in case sleep 1 echo timestamp > conftest.file -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[[\\\"\#\$\&\'\`$am_lf]]*) - AC_MSG_ERROR([unsafe absolute working directory name]);; -esac -case $srcdir in - *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) - AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; -esac - # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` + set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ @@ -846,33 +478,6 @@ fi AC_MSG_RESULT(yes)]) -# Copyright (C) 2009 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 1 - -# AM_SILENT_RULES([DEFAULT]) -# -------------------------- -# Enable less verbose build rules; with the default set to DEFAULT -# (`yes' being less verbose, `no' or empty being verbose). -AC_DEFUN([AM_SILENT_RULES], -[AC_ARG_ENABLE([silent-rules], -[ --enable-silent-rules less verbose build output (undo: `make V=1') - --disable-silent-rules verbose build output (undo: `make V=0')]) -case $enable_silent_rules in -yes) AM_DEFAULT_VERBOSITY=0;; -no) AM_DEFAULT_VERBOSITY=1;; -*) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; -esac -AC_SUBST([AM_DEFAULT_VERBOSITY])dnl -AM_BACKSLASH='\' -AC_SUBST([AM_BACKSLASH])dnl -_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl -]) - # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -901,25 +506,18 @@ INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) -# Copyright (C) 2006, 2008 Free Software Foundation, Inc. +# Copyright (C) 2006 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 2 - # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) -# AM_SUBST_NOTMAKE(VARIABLE) -# --------------------------- -# Public sister of _AM_SUBST_NOTMAKE. -AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) - # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. @@ -1016,1354 +614,3 @@ AC_SUBST([am__untar]) ]) # _AM_PROG_TAR -dnl xorg-macros.m4. Generated from xorg-macros.m4.in xorgversion.m4 by configure. -dnl -dnl Copyright (c) 2005, 2006, Oracle and/or its affiliates. All rights reserved. -dnl -dnl Permission is hereby granted, free of charge, to any person obtaining a -dnl copy of this software and associated documentation files (the "Software"), -dnl to deal in the Software without restriction, including without limitation -dnl the rights to use, copy, modify, merge, publish, distribute, sublicense, -dnl and/or sell copies of the Software, and to permit persons to whom the -dnl Software is furnished to do so, subject to the following conditions: -dnl -dnl The above copyright notice and this permission notice (including the next -dnl paragraph) shall be included in all copies or substantial portions of the -dnl Software. -dnl -dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -dnl IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -dnl FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL -dnl THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -dnl LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -dnl FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER -dnl DEALINGS IN THE SOFTWARE. - -# XORG_MACROS_VERSION(required-version) -# ------------------------------------- -# Minimum version: 1.1.0 -# -# If you're using a macro added in Version 1.1 or newer, include this in -# your configure.ac with the minimum required version, such as: -# XORG_MACROS_VERSION(1.1) -# -# To ensure that this macro is defined, also add: -# m4_ifndef([XORG_MACROS_VERSION], -# [m4_fatal([must install xorg-macros 1.1 or later before running autoconf/autogen])]) -# -# -# See the "minimum version" comment for each macro you use to see what -# version you require. -m4_defun([XORG_MACROS_VERSION],[ -m4_define([vers_have], [1.11.0]) -m4_define([maj_have], m4_substr(vers_have, 0, m4_index(vers_have, [.]))) -m4_define([maj_needed], m4_substr([$1], 0, m4_index([$1], [.]))) -m4_if(m4_cmp(maj_have, maj_needed), 0,, - [m4_fatal([xorg-macros major version ]maj_needed[ is required but ]vers_have[ found])]) -m4_if(m4_version_compare(vers_have, [$1]), -1, - [m4_fatal([xorg-macros version $1 or higher is required but ]vers_have[ found])]) -m4_undefine([vers_have]) -m4_undefine([maj_have]) -m4_undefine([maj_needed]) -]) # XORG_MACROS_VERSION - -# XORG_PROG_RAWCPP() -# ------------------ -# Minimum version: 1.0.0 -# -# Find cpp program and necessary flags for use in pre-processing text files -# such as man pages and config files -AC_DEFUN([XORG_PROG_RAWCPP],[ -AC_REQUIRE([AC_PROG_CPP]) -AC_PATH_PROGS(RAWCPP, [cpp], [${CPP}], - [$PATH:/bin:/usr/bin:/usr/lib:/usr/libexec:/usr/ccs/lib:/usr/ccs/lbin:/lib]) - -# Check for flag to avoid builtin definitions - assumes unix is predefined, -# which is not the best choice for supporting other OS'es, but covers most -# of the ones we need for now. -AC_MSG_CHECKING([if $RAWCPP requires -undef]) -AC_LANG_CONFTEST([Does cpp redefine unix ?]) -if test `${RAWCPP} < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then - AC_MSG_RESULT([no]) -else - if test `${RAWCPP} -undef < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then - RAWCPPFLAGS=-undef - AC_MSG_RESULT([yes]) - # under Cygwin unix is still defined even with -undef - elif test `${RAWCPP} -undef -ansi < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then - RAWCPPFLAGS="-undef -ansi" - AC_MSG_RESULT([yes, with -ansi]) - else - AC_MSG_ERROR([${RAWCPP} defines unix with or without -undef. I don't know what to do.]) - fi -fi -rm -f conftest.$ac_ext - -AC_MSG_CHECKING([if $RAWCPP requires -traditional]) -AC_LANG_CONFTEST([Does cpp preserve "whitespace"?]) -if test `${RAWCPP} < conftest.$ac_ext | grep -c 'preserve \"'` -eq 1 ; then - AC_MSG_RESULT([no]) -else - if test `${RAWCPP} -traditional < conftest.$ac_ext | grep -c 'preserve \"'` -eq 1 ; then - RAWCPPFLAGS="${RAWCPPFLAGS} -traditional" - AC_MSG_RESULT([yes]) - else - AC_MSG_ERROR([${RAWCPP} does not preserve whitespace with or without -traditional. I don't know what to do.]) - fi -fi -rm -f conftest.$ac_ext -AC_SUBST(RAWCPPFLAGS) -]) # XORG_PROG_RAWCPP - -# XORG_MANPAGE_SECTIONS() -# ----------------------- -# Minimum version: 1.0.0 -# -# Determine which sections man pages go in for the different man page types -# on this OS - replaces *ManSuffix settings in old Imake *.cf per-os files. -# Not sure if there's any better way than just hardcoding by OS name. -# Override default settings by setting environment variables -# Added MAN_SUBSTS in version 1.8 -# Added AC_PROG_SED in version 1.8 - -AC_DEFUN([XORG_MANPAGE_SECTIONS],[ -AC_REQUIRE([AC_CANONICAL_HOST]) -AC_REQUIRE([AC_PROG_SED]) - -if test x$APP_MAN_SUFFIX = x ; then - APP_MAN_SUFFIX=1 -fi -if test x$APP_MAN_DIR = x ; then - APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)' -fi - -if test x$LIB_MAN_SUFFIX = x ; then - LIB_MAN_SUFFIX=3 -fi -if test x$LIB_MAN_DIR = x ; then - LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)' -fi - -if test x$FILE_MAN_SUFFIX = x ; then - case $host_os in - solaris*) FILE_MAN_SUFFIX=4 ;; - *) FILE_MAN_SUFFIX=5 ;; - esac -fi -if test x$FILE_MAN_DIR = x ; then - FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)' -fi - -if test x$MISC_MAN_SUFFIX = x ; then - case $host_os in - solaris*) MISC_MAN_SUFFIX=5 ;; - *) MISC_MAN_SUFFIX=7 ;; - esac -fi -if test x$MISC_MAN_DIR = x ; then - MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)' -fi - -if test x$DRIVER_MAN_SUFFIX = x ; then - case $host_os in - solaris*) DRIVER_MAN_SUFFIX=7 ;; - *) DRIVER_MAN_SUFFIX=4 ;; - esac -fi -if test x$DRIVER_MAN_DIR = x ; then - DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)' -fi - -if test x$ADMIN_MAN_SUFFIX = x ; then - case $host_os in - solaris*) ADMIN_MAN_SUFFIX=1m ;; - *) ADMIN_MAN_SUFFIX=8 ;; - esac -fi -if test x$ADMIN_MAN_DIR = x ; then - ADMIN_MAN_DIR='$(mandir)/man$(ADMIN_MAN_SUFFIX)' -fi - - -AC_SUBST([APP_MAN_SUFFIX]) -AC_SUBST([LIB_MAN_SUFFIX]) -AC_SUBST([FILE_MAN_SUFFIX]) -AC_SUBST([MISC_MAN_SUFFIX]) -AC_SUBST([DRIVER_MAN_SUFFIX]) -AC_SUBST([ADMIN_MAN_SUFFIX]) -AC_SUBST([APP_MAN_DIR]) -AC_SUBST([LIB_MAN_DIR]) -AC_SUBST([FILE_MAN_DIR]) -AC_SUBST([MISC_MAN_DIR]) -AC_SUBST([DRIVER_MAN_DIR]) -AC_SUBST([ADMIN_MAN_DIR]) - -XORG_MAN_PAGE="X Version 11" -AC_SUBST([XORG_MAN_PAGE]) -MAN_SUBSTS="\ - -e 's|__vendorversion__|\"\$(PACKAGE_STRING)\" \"\$(XORG_MAN_PAGE)\"|' \ - -e 's|__xorgversion__|\"\$(PACKAGE_STRING)\" \"\$(XORG_MAN_PAGE)\"|' \ - -e 's|__xservername__|Xorg|g' \ - -e 's|__xconfigfile__|xorg.conf|g' \ - -e 's|__projectroot__|\$(prefix)|g' \ - -e 's|__apploaddir__|\$(appdefaultdir)|g' \ - -e 's|__appmansuffix__|\$(APP_MAN_SUFFIX)|g' \ - -e 's|__drivermansuffix__|\$(DRIVER_MAN_SUFFIX)|g' \ - -e 's|__adminmansuffix__|\$(ADMIN_MAN_SUFFIX)|g' \ - -e 's|__libmansuffix__|\$(LIB_MAN_SUFFIX)|g' \ - -e 's|__miscmansuffix__|\$(MISC_MAN_SUFFIX)|g' \ - -e 's|__filemansuffix__|\$(FILE_MAN_SUFFIX)|g'" -AC_SUBST([MAN_SUBSTS]) - -]) # XORG_MANPAGE_SECTIONS - -# XORG_CHECK_SGML_DOCTOOLS([MIN-VERSION]) -# ------------------------ -# Minimum version: 1.7.0 -# -# Defines the variable XORG_SGML_PATH containing the location of X11/defs.ent -# provided by xorg-sgml-doctools, if installed. -AC_DEFUN([XORG_CHECK_SGML_DOCTOOLS],[ -AC_MSG_CHECKING([for X.Org SGML entities m4_ifval([$1],[>= $1])]) -XORG_SGML_PATH= -PKG_CHECK_EXISTS([xorg-sgml-doctools m4_ifval([$1],[>= $1])], - [XORG_SGML_PATH=`$PKG_CONFIG --variable=sgmlrootdir xorg-sgml-doctools`], - [m4_ifval([$1],[:], - [if test x"$cross_compiling" != x"yes" ; then - AC_CHECK_FILE([$prefix/share/sgml/X11/defs.ent], - [XORG_SGML_PATH=$prefix/share/sgml]) - fi]) - ]) - -# Define variables STYLESHEET_SRCDIR and XSL_STYLESHEET containing -# the path and the name of the doc stylesheet -if test "x$XORG_SGML_PATH" != "x" ; then - AC_MSG_RESULT([$XORG_SGML_PATH]) - STYLESHEET_SRCDIR=$XORG_SGML_PATH/X11 - XSL_STYLESHEET=$STYLESHEET_SRCDIR/xorg.xsl -else - AC_MSG_RESULT([no]) -fi - -AC_SUBST(XORG_SGML_PATH) -AC_SUBST(STYLESHEET_SRCDIR) -AC_SUBST(XSL_STYLESHEET) -AM_CONDITIONAL([HAVE_STYLESHEETS], [test "x$XSL_STYLESHEET" != "x"]) -]) # XORG_CHECK_SGML_DOCTOOLS - -# XORG_CHECK_LINUXDOC -# ------------------- -# Minimum version: 1.0.0 -# -# Defines the variable MAKE_TEXT if the necessary tools and -# files are found. $(MAKE_TEXT) blah.sgml will then produce blah.txt. -# Whether or not the necessary tools and files are found can be checked -# with the AM_CONDITIONAL "BUILD_LINUXDOC" -AC_DEFUN([XORG_CHECK_LINUXDOC],[ -AC_REQUIRE([XORG_CHECK_SGML_DOCTOOLS]) -AC_REQUIRE([XORG_WITH_PS2PDF]) - -AC_PATH_PROG(LINUXDOC, linuxdoc) - -AC_MSG_CHECKING([whether to build documentation]) - -if test x$XORG_SGML_PATH != x && test x$LINUXDOC != x ; then - BUILDDOC=yes -else - BUILDDOC=no -fi - -AM_CONDITIONAL(BUILD_LINUXDOC, [test x$BUILDDOC = xyes]) - -AC_MSG_RESULT([$BUILDDOC]) - -AC_MSG_CHECKING([whether to build pdf documentation]) - -if test x$have_ps2pdf != xno && test x$BUILD_PDFDOC != xno; then - BUILDPDFDOC=yes -else - BUILDPDFDOC=no -fi - -AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes]) - -AC_MSG_RESULT([$BUILDPDFDOC]) - -MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH GROFF_NO_SGR=y $LINUXDOC -B txt -f" -MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC -B latex --papersize=letter --output=ps" -MAKE_PDF="$PS2PDF" -MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC -B html --split=0" - -AC_SUBST(MAKE_TEXT) -AC_SUBST(MAKE_PS) -AC_SUBST(MAKE_PDF) -AC_SUBST(MAKE_HTML) -]) # XORG_CHECK_LINUXDOC - -# XORG_CHECK_DOCBOOK -# ------------------- -# Minimum version: 1.0.0 -# -# Checks for the ability to build output formats from SGML DocBook source. -# For XXX in {TXT, PDF, PS, HTML}, the AM_CONDITIONAL "BUILD_XXXDOC" -# indicates whether the necessary tools and files are found and, if set, -# $(MAKE_XXX) blah.sgml will produce blah.xxx. -AC_DEFUN([XORG_CHECK_DOCBOOK],[ -AC_REQUIRE([XORG_CHECK_SGML_DOCTOOLS]) - -BUILDTXTDOC=no -BUILDPDFDOC=no -BUILDPSDOC=no -BUILDHTMLDOC=no - -AC_PATH_PROG(DOCBOOKPS, docbook2ps) -AC_PATH_PROG(DOCBOOKPDF, docbook2pdf) -AC_PATH_PROG(DOCBOOKHTML, docbook2html) -AC_PATH_PROG(DOCBOOKTXT, docbook2txt) - -AC_MSG_CHECKING([whether to build text documentation]) -if test x$XORG_SGML_PATH != x && test x$DOCBOOKTXT != x && - test x$BUILD_TXTDOC != xno; then - BUILDTXTDOC=yes -fi -AM_CONDITIONAL(BUILD_TXTDOC, [test x$BUILDTXTDOC = xyes]) -AC_MSG_RESULT([$BUILDTXTDOC]) - -AC_MSG_CHECKING([whether to build PDF documentation]) -if test x$XORG_SGML_PATH != x && test x$DOCBOOKPDF != x && - test x$BUILD_PDFDOC != xno; then - BUILDPDFDOC=yes -fi -AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes]) -AC_MSG_RESULT([$BUILDPDFDOC]) - -AC_MSG_CHECKING([whether to build PostScript documentation]) -if test x$XORG_SGML_PATH != x && test x$DOCBOOKPS != x && - test x$BUILD_PSDOC != xno; then - BUILDPSDOC=yes -fi -AM_CONDITIONAL(BUILD_PSDOC, [test x$BUILDPSDOC = xyes]) -AC_MSG_RESULT([$BUILDPSDOC]) - -AC_MSG_CHECKING([whether to build HTML documentation]) -if test x$XORG_SGML_PATH != x && test x$DOCBOOKHTML != x && - test x$BUILD_HTMLDOC != xno; then - BUILDHTMLDOC=yes -fi -AM_CONDITIONAL(BUILD_HTMLDOC, [test x$BUILDHTMLDOC = xyes]) -AC_MSG_RESULT([$BUILDHTMLDOC]) - -MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKTXT" -MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPS" -MAKE_PDF="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPDF" -MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKHTML" - -AC_SUBST(MAKE_TEXT) -AC_SUBST(MAKE_PS) -AC_SUBST(MAKE_PDF) -AC_SUBST(MAKE_HTML) -]) # XORG_CHECK_DOCBOOK - -# XORG_WITH_XMLTO([MIN-VERSION], [DEFAULT]) -# ---------------- -# Minimum version: 1.5.0 -# Minimum version for optional DEFAULT argument: 1.11.0 -# -# Documentation tools are not always available on all platforms and sometimes -# not at the appropriate level. This macro enables a module to test for the -# presence of the tool and obtain it's path in separate variables. Coupled with -# the --with-xmlto option, it allows maximum flexibilty in making decisions -# as whether or not to use the xmlto package. When DEFAULT is not specified, -# --with-xmlto assumes 'auto'. -# -# Interface to module: -# HAVE_XMLTO: used in makefiles to conditionally generate documentation -# XMLTO: returns the path of the xmlto program found -# returns the path set by the user in the environment -# --with-xmlto: 'yes' user instructs the module to use xmlto -# 'no' user instructs the module not to use xmlto -# -# Added in version 1.10.0 -# HAVE_XMLTO_TEXT: used in makefiles to conditionally generate text documentation -# xmlto for text output requires either lynx, links, or w3m browsers -# -# If the user sets the value of XMLTO, AC_PATH_PROG skips testing the path. -# -AC_DEFUN([XORG_WITH_XMLTO],[ -AC_ARG_VAR([XMLTO], [Path to xmlto command]) -m4_define([_defopt], m4_default([$2], [auto])) -AC_ARG_WITH(xmlto, - AS_HELP_STRING([--with-xmlto], - [Use xmlto to regenerate documentation (default: ]_defopt[)]), - [use_xmlto=$withval], [use_xmlto=]_defopt) -m4_undefine([_defopt]) - -if test "x$use_xmlto" = x"auto"; then - AC_PATH_PROG([XMLTO], [xmlto]) - if test "x$XMLTO" = "x"; then - AC_MSG_WARN([xmlto not found - documentation targets will be skipped]) - have_xmlto=no - else - have_xmlto=yes - fi -elif test "x$use_xmlto" = x"yes" ; then - AC_PATH_PROG([XMLTO], [xmlto]) - if test "x$XMLTO" = "x"; then - AC_MSG_ERROR([--with-xmlto=yes specified but xmlto not found in PATH]) - fi - have_xmlto=yes -elif test "x$use_xmlto" = x"no" ; then - if test "x$XMLTO" != "x"; then - AC_MSG_WARN([ignoring XMLTO environment variable since --with-xmlto=no was specified]) - fi - have_xmlto=no -else - AC_MSG_ERROR([--with-xmlto expects 'yes' or 'no']) -fi - -# Test for a minimum version of xmlto, if provided. -m4_ifval([$1], -[if test "$have_xmlto" = yes; then - # scrape the xmlto version - AC_MSG_CHECKING([the xmlto version]) - xmlto_version=`$XMLTO --version 2>/dev/null | cut -d' ' -f3` - AC_MSG_RESULT([$xmlto_version]) - AS_VERSION_COMPARE([$xmlto_version], [$1], - [if test "x$use_xmlto" = xauto; then - AC_MSG_WARN([xmlto version $xmlto_version found, but $1 needed]) - have_xmlto=no - else - AC_MSG_ERROR([xmlto version $xmlto_version found, but $1 needed]) - fi]) -fi]) - -# Test for the ability of xmlto to generate a text target -have_xmlto_text=no -cat > conftest.xml << "EOF" -EOF -AS_IF([test "$have_xmlto" = yes], - [AS_IF([$XMLTO --skip-validation txt conftest.xml >/dev/null 2>&1], - [have_xmlto_text=yes], - [AC_MSG_WARN([xmlto cannot generate text format, this format skipped])])]) -rm -f conftest.xml -AM_CONDITIONAL([HAVE_XMLTO_TEXT], [test $have_xmlto_text = yes]) -AM_CONDITIONAL([HAVE_XMLTO], [test "$have_xmlto" = yes]) -]) # XORG_WITH_XMLTO - -# XORG_WITH_ASCIIDOC([MIN-VERSION], [DEFAULT]) -# ---------------- -# Minimum version: 1.5.0 -# Minimum version for optional DEFAULT argument: 1.11.0 -# -# Documentation tools are not always available on all platforms and sometimes -# not at the appropriate level. This macro enables a module to test for the -# presence of the tool and obtain it's path in separate variables. Coupled with -# the --with-asciidoc option, it allows maximum flexibilty in making decisions -# as whether or not to use the asciidoc package. When DEFAULT is not specified, -# --with-asciidoc assumes 'auto'. -# -# Interface to module: -# HAVE_ASCIIDOC: used in makefiles to conditionally generate documentation -# ASCIIDOC: returns the path of the asciidoc program found -# returns the path set by the user in the environment -# --with-asciidoc: 'yes' user instructs the module to use asciidoc -# 'no' user instructs the module not to use asciidoc -# -# If the user sets the value of ASCIIDOC, AC_PATH_PROG skips testing the path. -# -AC_DEFUN([XORG_WITH_ASCIIDOC],[ -AC_ARG_VAR([ASCIIDOC], [Path to asciidoc command]) -m4_define([_defopt], m4_default([$2], [auto])) -AC_ARG_WITH(asciidoc, - AS_HELP_STRING([--with-asciidoc], - [Use asciidoc to regenerate documentation (default: ]_defopt[)]), - [use_asciidoc=$withval], [use_asciidoc=]_defopt) -m4_undefine([_defopt]) - -if test "x$use_asciidoc" = x"auto"; then - AC_PATH_PROG([ASCIIDOC], [asciidoc]) - if test "x$ASCIIDOC" = "x"; then - AC_MSG_WARN([asciidoc not found - documentation targets will be skipped]) - have_asciidoc=no - else - have_asciidoc=yes - fi -elif test "x$use_asciidoc" = x"yes" ; then - AC_PATH_PROG([ASCIIDOC], [asciidoc]) - if test "x$ASCIIDOC" = "x"; then - AC_MSG_ERROR([--with-asciidoc=yes specified but asciidoc not found in PATH]) - fi - have_asciidoc=yes -elif test "x$use_asciidoc" = x"no" ; then - if test "x$ASCIIDOC" != "x"; then - AC_MSG_WARN([ignoring ASCIIDOC environment variable since --with-asciidoc=no was specified]) - fi - have_asciidoc=no -else - AC_MSG_ERROR([--with-asciidoc expects 'yes' or 'no']) -fi -m4_ifval([$1], -[if test "$have_asciidoc" = yes; then - # scrape the asciidoc version - AC_MSG_CHECKING([the asciidoc version]) - asciidoc_version=`$ASCIIDOC --version 2>/dev/null | cut -d' ' -f2` - AC_MSG_RESULT([$asciidoc_version]) - AS_VERSION_COMPARE([$asciidoc_version], [$1], - [if test "x$use_asciidoc" = xauto; then - AC_MSG_WARN([asciidoc version $asciidoc_version found, but $1 needed]) - have_asciidoc=no - else - AC_MSG_ERROR([asciidoc version $asciidoc_version found, but $1 needed]) - fi]) -fi]) -AM_CONDITIONAL([HAVE_ASCIIDOC], [test "$have_asciidoc" = yes]) -]) # XORG_WITH_ASCIIDOC - -# XORG_WITH_DOXYGEN([MIN-VERSION], [DEFAULT]) -# -------------------------------- -# Minimum version: 1.5.0 -# Minimum version for optional DEFAULT argument: 1.11.0 -# -# Documentation tools are not always available on all platforms and sometimes -# not at the appropriate level. This macro enables a module to test for the -# presence of the tool and obtain it's path in separate variables. Coupled with -# the --with-doxygen option, it allows maximum flexibilty in making decisions -# as whether or not to use the doxygen package. When DEFAULT is not specified, -# --with-doxygen assumes 'auto'. -# -# Interface to module: -# HAVE_DOXYGEN: used in makefiles to conditionally generate documentation -# DOXYGEN: returns the path of the doxygen program found -# returns the path set by the user in the environment -# --with-doxygen: 'yes' user instructs the module to use doxygen -# 'no' user instructs the module not to use doxygen -# -# If the user sets the value of DOXYGEN, AC_PATH_PROG skips testing the path. -# -AC_DEFUN([XORG_WITH_DOXYGEN],[ -AC_ARG_VAR([DOXYGEN], [Path to doxygen command]) -m4_define([_defopt], m4_default([$2], [auto])) -AC_ARG_WITH(doxygen, - AS_HELP_STRING([--with-doxygen], - [Use doxygen to regenerate documentation (default: ]_defopt[)]), - [use_doxygen=$withval], [use_doxygen=]_defopt) -m4_undefine([_defopt]) - -if test "x$use_doxygen" = x"auto"; then - AC_PATH_PROG([DOXYGEN], [doxygen]) - if test "x$DOXYGEN" = "x"; then - AC_MSG_WARN([doxygen not found - documentation targets will be skipped]) - have_doxygen=no - else - have_doxygen=yes - fi -elif test "x$use_doxygen" = x"yes" ; then - AC_PATH_PROG([DOXYGEN], [doxygen]) - if test "x$DOXYGEN" = "x"; then - AC_MSG_ERROR([--with-doxygen=yes specified but doxygen not found in PATH]) - fi - have_doxygen=yes -elif test "x$use_doxygen" = x"no" ; then - if test "x$DOXYGEN" != "x"; then - AC_MSG_WARN([ignoring DOXYGEN environment variable since --with-doxygen=no was specified]) - fi - have_doxygen=no -else - AC_MSG_ERROR([--with-doxygen expects 'yes' or 'no']) -fi -m4_ifval([$1], -[if test "$have_doxygen" = yes; then - # scrape the doxygen version - AC_MSG_CHECKING([the doxygen version]) - doxygen_version=`$DOXYGEN --version 2>/dev/null` - AC_MSG_RESULT([$doxygen_version]) - AS_VERSION_COMPARE([$doxygen_version], [$1], - [if test "x$use_doxygen" = xauto; then - AC_MSG_WARN([doxygen version $doxygen_version found, but $1 needed]) - have_doxygen=no - else - AC_MSG_ERROR([doxygen version $doxygen_version found, but $1 needed]) - fi]) -fi]) -AM_CONDITIONAL([HAVE_DOXYGEN], [test "$have_doxygen" = yes]) -]) # XORG_WITH_DOXYGEN - -# XORG_WITH_GROFF([DEFAULT]) -# ---------------- -# Minimum version: 1.6.0 -# Minimum version for optional DEFAULT argument: 1.11.0 -# -# Documentation tools are not always available on all platforms and sometimes -# not at the appropriate level. This macro enables a module to test for the -# presence of the tool and obtain it's path in separate variables. Coupled with -# the --with-groff option, it allows maximum flexibilty in making decisions -# as whether or not to use the groff package. When DEFAULT is not specified, -# --with-groff assumes 'auto'. -# -# Interface to module: -# HAVE_GROFF: used in makefiles to conditionally generate documentation -# HAVE_GROFF_MM: the memorandum macros (-mm) package -# HAVE_GROFF_MS: the -ms macros package -# GROFF: returns the path of the groff program found -# returns the path set by the user in the environment -# --with-groff: 'yes' user instructs the module to use groff -# 'no' user instructs the module not to use groff -# -# Added in version 1.9.0: -# HAVE_GROFF_HTML: groff has dependencies to output HTML format: -# pnmcut pnmcrop pnmtopng pnmtops from the netpbm package. -# psselect from the psutils package. -# the ghostcript package. Refer to the grohtml man pages -# -# If the user sets the value of GROFF, AC_PATH_PROG skips testing the path. -# -# OS and distros often splits groff in a basic and full package, the former -# having the groff program and the later having devices, fonts and macros -# Checking for the groff executable is not enough. -# -# If macros are missing, we cannot assume that groff is useless, so we don't -# unset HAVE_GROFF or GROFF env variables. -# HAVE_GROFF_?? can never be true while HAVE_GROFF is false. -# -AC_DEFUN([XORG_WITH_GROFF],[ -AC_ARG_VAR([GROFF], [Path to groff command]) -m4_define([_defopt], m4_default([$1], [auto])) -AC_ARG_WITH(groff, - AS_HELP_STRING([--with-groff], - [Use groff to regenerate documentation (default: ]_defopt[)]), - [use_groff=$withval], [use_groff=]_defopt) -m4_undefine([_defopt]) - -if test "x$use_groff" = x"auto"; then - AC_PATH_PROG([GROFF], [groff]) - if test "x$GROFF" = "x"; then - AC_MSG_WARN([groff not found - documentation targets will be skipped]) - have_groff=no - else - have_groff=yes - fi -elif test "x$use_groff" = x"yes" ; then - AC_PATH_PROG([GROFF], [groff]) - if test "x$GROFF" = "x"; then - AC_MSG_ERROR([--with-groff=yes specified but groff not found in PATH]) - fi - have_groff=yes -elif test "x$use_groff" = x"no" ; then - if test "x$GROFF" != "x"; then - AC_MSG_WARN([ignoring GROFF environment variable since --with-groff=no was specified]) - fi - have_groff=no -else - AC_MSG_ERROR([--with-groff expects 'yes' or 'no']) -fi - -# We have groff, test for the presence of the macro packages -if test "x$have_groff" = x"yes"; then - AC_MSG_CHECKING([for ${GROFF} -ms macros]) - if ${GROFF} -ms -I. /dev/null >/dev/null 2>&1 ; then - groff_ms_works=yes - else - groff_ms_works=no - fi - AC_MSG_RESULT([$groff_ms_works]) - AC_MSG_CHECKING([for ${GROFF} -mm macros]) - if ${GROFF} -mm -I. /dev/null >/dev/null 2>&1 ; then - groff_mm_works=yes - else - groff_mm_works=no - fi - AC_MSG_RESULT([$groff_mm_works]) -fi - -# We have groff, test for HTML dependencies, one command per package -if test "x$have_groff" = x"yes"; then - AC_PATH_PROGS(GS_PATH, [gs gswin32c]) - AC_PATH_PROG(PNMTOPNG_PATH, [pnmtopng]) - AC_PATH_PROG(PSSELECT_PATH, [psselect]) - if test "x$GS_PATH" != "x" -a "x$PNMTOPNG_PATH" != "x" -a "x$PSSELECT_PATH" != "x"; then - have_groff_html=yes - else - have_groff_html=no - AC_MSG_WARN([grohtml dependencies not found - HTML Documentation skipped. Refer to grohtml man pages]) - fi -fi - -# Set Automake conditionals for Makefiles -AM_CONDITIONAL([HAVE_GROFF], [test "$have_groff" = yes]) -AM_CONDITIONAL([HAVE_GROFF_MS], [test "$groff_ms_works" = yes]) -AM_CONDITIONAL([HAVE_GROFF_MM], [test "$groff_mm_works" = yes]) -AM_CONDITIONAL([HAVE_GROFF_HTML], [test "$have_groff_html" = yes]) -]) # XORG_WITH_GROFF - -# XORG_WITH_FOP([DEFAULT]) -# ---------------- -# Minimum version: 1.6.0 -# Minimum version for optional DEFAULT argument: 1.11.0 -# -# Documentation tools are not always available on all platforms and sometimes -# not at the appropriate level. This macro enables a module to test for the -# presence of the tool and obtain it's path in separate variables. Coupled with -# the --with-fop option, it allows maximum flexibilty in making decisions -# as whether or not to use the fop package. When DEFAULT is not specified, -# --with-fop assumes 'auto'. -# -# Interface to module: -# HAVE_FOP: used in makefiles to conditionally generate documentation -# FOP: returns the path of the fop program found -# returns the path set by the user in the environment -# --with-fop: 'yes' user instructs the module to use fop -# 'no' user instructs the module not to use fop -# -# If the user sets the value of FOP, AC_PATH_PROG skips testing the path. -# -AC_DEFUN([XORG_WITH_FOP],[ -AC_ARG_VAR([FOP], [Path to fop command]) -m4_define([_defopt], m4_default([$1], [auto])) -AC_ARG_WITH(fop, - AS_HELP_STRING([--with-fop], - [Use fop to regenerate documentation (default: ]_defopt[)]), - [use_fop=$withval], [use_fop=]_defopt) -m4_undefine([_defopt]) - -if test "x$use_fop" = x"auto"; then - AC_PATH_PROG([FOP], [fop]) - if test "x$FOP" = "x"; then - AC_MSG_WARN([fop not found - documentation targets will be skipped]) - have_fop=no - else - have_fop=yes - fi -elif test "x$use_fop" = x"yes" ; then - AC_PATH_PROG([FOP], [fop]) - if test "x$FOP" = "x"; then - AC_MSG_ERROR([--with-fop=yes specified but fop not found in PATH]) - fi - have_fop=yes -elif test "x$use_fop" = x"no" ; then - if test "x$FOP" != "x"; then - AC_MSG_WARN([ignoring FOP environment variable since --with-fop=no was specified]) - fi - have_fop=no -else - AC_MSG_ERROR([--with-fop expects 'yes' or 'no']) -fi -AM_CONDITIONAL([HAVE_FOP], [test "$have_fop" = yes]) -]) # XORG_WITH_FOP - -# XORG_WITH_PS2PDF([DEFAULT]) -# ---------------- -# Minimum version: 1.6.0 -# Minimum version for optional DEFAULT argument: 1.11.0 -# -# Documentation tools are not always available on all platforms and sometimes -# not at the appropriate level. This macro enables a module to test for the -# presence of the tool and obtain it's path in separate variables. Coupled with -# the --with-ps2pdf option, it allows maximum flexibilty in making decisions -# as whether or not to use the ps2pdf package. When DEFAULT is not specified, -# --with-ps2pdf assumes 'auto'. -# -# Interface to module: -# HAVE_PS2PDF: used in makefiles to conditionally generate documentation -# PS2PDF: returns the path of the ps2pdf program found -# returns the path set by the user in the environment -# --with-ps2pdf: 'yes' user instructs the module to use ps2pdf -# 'no' user instructs the module not to use ps2pdf -# -# If the user sets the value of PS2PDF, AC_PATH_PROG skips testing the path. -# -AC_DEFUN([XORG_WITH_PS2PDF],[ -AC_ARG_VAR([PS2PDF], [Path to ps2pdf command]) -m4_define([_defopt], m4_default([$1], [auto])) -AC_ARG_WITH(ps2pdf, - AS_HELP_STRING([--with-ps2pdf], - [Use ps2pdf to regenerate documentation (default: ]_defopt[)]), - [use_ps2pdf=$withval], [use_ps2pdf=]_defopt) -m4_undefine([_defopt]) - -if test "x$use_ps2pdf" = x"auto"; then - AC_PATH_PROG([PS2PDF], [ps2pdf]) - if test "x$PS2PDF" = "x"; then - AC_MSG_WARN([ps2pdf not found - documentation targets will be skipped]) - have_ps2pdf=no - else - have_ps2pdf=yes - fi -elif test "x$use_ps2pdf" = x"yes" ; then - AC_PATH_PROG([PS2PDF], [ps2pdf]) - if test "x$PS2PDF" = "x"; then - AC_MSG_ERROR([--with-ps2pdf=yes specified but ps2pdf not found in PATH]) - fi - have_ps2pdf=yes -elif test "x$use_ps2pdf" = x"no" ; then - if test "x$PS2PDF" != "x"; then - AC_MSG_WARN([ignoring PS2PDF environment variable since --with-ps2pdf=no was specified]) - fi - have_ps2pdf=no -else - AC_MSG_ERROR([--with-ps2pdf expects 'yes' or 'no']) -fi -AM_CONDITIONAL([HAVE_PS2PDF], [test "$have_ps2pdf" = yes]) -]) # XORG_WITH_PS2PDF - -# XORG_ENABLE_DOCS (enable_docs=yes) -# ---------------- -# Minimum version: 1.6.0 -# -# Documentation tools are not always available on all platforms and sometimes -# not at the appropriate level. This macro enables a builder to skip all -# documentation targets except traditional man pages. -# Combined with the specific tool checking macros XORG_WITH_*, it provides -# maximum flexibilty in controlling documentation building. -# Refer to: -# XORG_WITH_XMLTO --with-xmlto -# XORG_WITH_ASCIIDOC --with-asciidoc -# XORG_WITH_DOXYGEN --with-doxygen -# XORG_WITH_FOP --with-fop -# XORG_WITH_GROFF --with-groff -# XORG_WITH_PS2PDF --with-ps2pdf -# -# Interface to module: -# ENABLE_DOCS: used in makefiles to conditionally generate documentation -# --enable-docs: 'yes' user instructs the module to generate docs -# 'no' user instructs the module not to generate docs -# parm1: specify the default value, yes or no. -# -AC_DEFUN([XORG_ENABLE_DOCS],[ -m4_define([docs_default], m4_default([$1], [yes])) -AC_ARG_ENABLE(docs, - AS_HELP_STRING([--enable-docs], - [Enable building the documentation (default: ]docs_default[)]), - [build_docs=$enableval], [build_docs=]docs_default) -m4_undefine([docs_default]) -AM_CONDITIONAL(ENABLE_DOCS, [test x$build_docs = xyes]) -AC_MSG_CHECKING([whether to build documentation]) -AC_MSG_RESULT([$build_docs]) -]) # XORG_ENABLE_DOCS - -# XORG_ENABLE_DEVEL_DOCS (enable_devel_docs=yes) -# ---------------- -# Minimum version: 1.6.0 -# -# This macro enables a builder to skip all developer documentation. -# Combined with the specific tool checking macros XORG_WITH_*, it provides -# maximum flexibilty in controlling documentation building. -# Refer to: -# XORG_WITH_XMLTO --with-xmlto -# XORG_WITH_ASCIIDOC --with-asciidoc -# XORG_WITH_DOXYGEN --with-doxygen -# XORG_WITH_FOP --with-fop -# XORG_WITH_GROFF --with-groff -# XORG_WITH_PS2PDF --with-ps2pdf -# -# Interface to module: -# ENABLE_DEVEL_DOCS: used in makefiles to conditionally generate developer docs -# --enable-devel-docs: 'yes' user instructs the module to generate developer docs -# 'no' user instructs the module not to generate developer docs -# parm1: specify the default value, yes or no. -# -AC_DEFUN([XORG_ENABLE_DEVEL_DOCS],[ -m4_define([devel_default], m4_default([$1], [yes])) -AC_ARG_ENABLE(devel-docs, - AS_HELP_STRING([--enable-devel-docs], - [Enable building the developer documentation (default: ]devel_default[)]), - [build_devel_docs=$enableval], [build_devel_docs=]devel_default) -m4_undefine([devel_default]) -AM_CONDITIONAL(ENABLE_DEVEL_DOCS, [test x$build_devel_docs = xyes]) -AC_MSG_CHECKING([whether to build developer documentation]) -AC_MSG_RESULT([$build_devel_docs]) -]) # XORG_ENABLE_DEVEL_DOCS - -# XORG_ENABLE_SPECS (enable_specs=yes) -# ---------------- -# Minimum version: 1.6.0 -# -# This macro enables a builder to skip all functional specification targets. -# Combined with the specific tool checking macros XORG_WITH_*, it provides -# maximum flexibilty in controlling documentation building. -# Refer to: -# XORG_WITH_XMLTO --with-xmlto -# XORG_WITH_ASCIIDOC --with-asciidoc -# XORG_WITH_DOXYGEN --with-doxygen -# XORG_WITH_FOP --with-fop -# XORG_WITH_GROFF --with-groff -# XORG_WITH_PS2PDF --with-ps2pdf -# -# Interface to module: -# ENABLE_SPECS: used in makefiles to conditionally generate specs -# --enable-specs: 'yes' user instructs the module to generate specs -# 'no' user instructs the module not to generate specs -# parm1: specify the default value, yes or no. -# -AC_DEFUN([XORG_ENABLE_SPECS],[ -m4_define([spec_default], m4_default([$1], [yes])) -AC_ARG_ENABLE(specs, - AS_HELP_STRING([--enable-specs], - [Enable building the specs (default: ]spec_default[)]), - [build_specs=$enableval], [build_specs=]spec_default) -m4_undefine([spec_default]) -AM_CONDITIONAL(ENABLE_SPECS, [test x$build_specs = xyes]) -AC_MSG_CHECKING([whether to build functional specifications]) -AC_MSG_RESULT([$build_specs]) -]) # XORG_ENABLE_SPECS - -# XORG_CHECK_MALLOC_ZERO -# ---------------------- -# Minimum version: 1.0.0 -# -# Defines {MALLOC,XMALLOC,XTMALLOC}_ZERO_CFLAGS appropriately if -# malloc(0) returns NULL. Packages should add one of these cflags to -# their AM_CFLAGS (or other appropriate *_CFLAGS) to use them. -AC_DEFUN([XORG_CHECK_MALLOC_ZERO],[ -AC_ARG_ENABLE(malloc0returnsnull, - AS_HELP_STRING([--enable-malloc0returnsnull], - [malloc(0) returns NULL (default: auto)]), - [MALLOC_ZERO_RETURNS_NULL=$enableval], - [MALLOC_ZERO_RETURNS_NULL=auto]) - -AC_MSG_CHECKING([whether malloc(0) returns NULL]) -if test "x$MALLOC_ZERO_RETURNS_NULL" = xauto; then - AC_RUN_IFELSE([AC_LANG_PROGRAM([ -#include -],[ - char *m0, *r0, *c0, *p; - m0 = malloc(0); - p = malloc(10); - r0 = realloc(p,0); - c0 = calloc(0,10); - exit((m0 == 0 || r0 == 0 || c0 == 0) ? 0 : 1); -])], - [MALLOC_ZERO_RETURNS_NULL=yes], - [MALLOC_ZERO_RETURNS_NULL=no], - [MALLOC_ZERO_RETURNS_NULL=yes]) -fi -AC_MSG_RESULT([$MALLOC_ZERO_RETURNS_NULL]) - -if test "x$MALLOC_ZERO_RETURNS_NULL" = xyes; then - MALLOC_ZERO_CFLAGS="-DMALLOC_0_RETURNS_NULL" - XMALLOC_ZERO_CFLAGS=$MALLOC_ZERO_CFLAGS - XTMALLOC_ZERO_CFLAGS="$MALLOC_ZERO_CFLAGS -DXTMALLOC_BC" -else - MALLOC_ZERO_CFLAGS="" - XMALLOC_ZERO_CFLAGS="" - XTMALLOC_ZERO_CFLAGS="" -fi - -AC_SUBST([MALLOC_ZERO_CFLAGS]) -AC_SUBST([XMALLOC_ZERO_CFLAGS]) -AC_SUBST([XTMALLOC_ZERO_CFLAGS]) -]) # XORG_CHECK_MALLOC_ZERO - -# XORG_WITH_LINT() -# ---------------- -# Minimum version: 1.1.0 -# -# This macro enables the use of a tool that flags some suspicious and -# non-portable constructs (likely to be bugs) in C language source code. -# It will attempt to locate the tool and use appropriate options. -# There are various lint type tools on different platforms. -# -# Interface to module: -# LINT: returns the path to the tool found on the platform -# or the value set to LINT on the configure cmd line -# also an Automake conditional -# LINT_FLAGS: an Automake variable with appropriate flags -# -# --with-lint: 'yes' user instructs the module to use lint -# 'no' user instructs the module not to use lint (default) -# -# If the user sets the value of LINT, AC_PATH_PROG skips testing the path. -# If the user sets the value of LINT_FLAGS, they are used verbatim. -# -AC_DEFUN([XORG_WITH_LINT],[ - -AC_ARG_VAR([LINT], [Path to a lint-style command]) -AC_ARG_VAR([LINT_FLAGS], [Flags for the lint-style command]) -AC_ARG_WITH(lint, [AS_HELP_STRING([--with-lint], - [Use a lint-style source code checker (default: disabled)])], - [use_lint=$withval], [use_lint=no]) - -# Obtain platform specific info like program name and options -# The lint program on FreeBSD and NetBSD is different from the one on Solaris -case $host_os in - *linux* | *openbsd* | kfreebsd*-gnu | darwin* | cygwin*) - lint_name=splint - lint_options="-badflag" - ;; - *freebsd* | *netbsd*) - lint_name=lint - lint_options="-u -b" - ;; - *solaris*) - lint_name=lint - lint_options="-u -b -h -erroff=E_INDISTING_FROM_TRUNC2" - ;; -esac - -# Test for the presence of the program (either guessed by the code or spelled out by the user) -if test "x$use_lint" = x"yes" ; then - AC_PATH_PROG([LINT], [$lint_name]) - if test "x$LINT" = "x"; then - AC_MSG_ERROR([--with-lint=yes specified but lint-style tool not found in PATH]) - fi -elif test "x$use_lint" = x"no" ; then - if test "x$LINT" != "x"; then - AC_MSG_WARN([ignoring LINT environment variable since --with-lint=no was specified]) - fi -else - AC_MSG_ERROR([--with-lint expects 'yes' or 'no'. Use LINT variable to specify path.]) -fi - -# User supplied flags override default flags -if test "x$LINT_FLAGS" != "x"; then - lint_options=$LINT_FLAGS -fi - -AC_SUBST([LINT_FLAGS],[$lint_options]) -AM_CONDITIONAL(LINT, [test "x$LINT" != x]) - -]) # XORG_WITH_LINT - -# XORG_LINT_LIBRARY(LIBNAME) -# -------------------------- -# Minimum version: 1.1.0 -# -# Sets up flags for building lint libraries for checking programs that call -# functions in the library. -# -# Interface to module: -# LINTLIB - Automake variable with the name of lint library file to make -# MAKE_LINT_LIB - Automake conditional -# -# --enable-lint-library: - 'yes' user instructs the module to created a lint library -# - 'no' user instructs the module not to create a lint library (default) - -AC_DEFUN([XORG_LINT_LIBRARY],[ -AC_REQUIRE([XORG_WITH_LINT]) -AC_ARG_ENABLE(lint-library, [AS_HELP_STRING([--enable-lint-library], - [Create lint library (default: disabled)])], - [make_lint_lib=$enableval], [make_lint_lib=no]) - -if test "x$make_lint_lib" = x"yes" ; then - LINTLIB=llib-l$1.ln - if test "x$LINT" = "x"; then - AC_MSG_ERROR([Cannot make lint library without --with-lint]) - fi -elif test "x$make_lint_lib" != x"no" ; then - AC_MSG_ERROR([--enable-lint-library expects 'yes' or 'no'.]) -fi - -AC_SUBST(LINTLIB) -AM_CONDITIONAL(MAKE_LINT_LIB, [test x$make_lint_lib != xno]) - -]) # XORG_LINT_LIBRARY - -# XORG_CWARNFLAGS -# --------------- -# Minimum version: 1.2.0 -# -# Defines CWARNFLAGS to enable C compiler warnings. -# -AC_DEFUN([XORG_CWARNFLAGS], [ -AC_REQUIRE([AC_PROG_CC_C99]) -if test "x$GCC" = xyes ; then - CWARNFLAGS="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes \ --Wmissing-declarations -Wnested-externs -fno-strict-aliasing \ --Wbad-function-cast -Wformat=2" - case `$CC -dumpversion` in - 3.4.* | 4.*) - CWARNFLAGS="$CWARNFLAGS -Wold-style-definition -Wdeclaration-after-statement" - ;; - esac -else - AC_CHECK_DECL([__SUNPRO_C], [SUNCC="yes"], [SUNCC="no"]) - if test "x$SUNCC" = "xyes"; then - CWARNFLAGS="-v" - fi -fi -AC_SUBST(CWARNFLAGS) -]) # XORG_CWARNFLAGS - -# XORG_STRICT_OPTION -# ----------------------- -# Minimum version: 1.3.0 -# -# Add configure option to enable strict compilation -AC_DEFUN([XORG_STRICT_OPTION], [ -# If the module's configure.ac calls AC_PROG_CC later on, CC gets set to C89 -AC_REQUIRE([AC_PROG_CC_C99]) -AC_REQUIRE([XORG_CWARNFLAGS]) - -AC_ARG_ENABLE(strict-compilation, - AS_HELP_STRING([--enable-strict-compilation], - [Enable all warnings from compiler and make them errors (default: disabled)]), - [STRICT_COMPILE=$enableval], [STRICT_COMPILE=no]) -if test "x$STRICT_COMPILE" = "xyes"; then - AC_CHECK_DECL([__SUNPRO_C], [SUNCC="yes"], [SUNCC="no"]) - AC_CHECK_DECL([__INTEL_COMPILER], [INTELCC="yes"], [INTELCC="no"]) - if test "x$GCC" = xyes ; then - STRICT_CFLAGS="-pedantic -Werror" - elif test "x$SUNCC" = "xyes"; then - STRICT_CFLAGS="-errwarn" - elif test "x$INTELCC" = "xyes"; then - STRICT_CFLAGS="-Werror" - fi -fi -CWARNFLAGS="$CWARNFLAGS $STRICT_CFLAGS" -AC_SUBST([CWARNFLAGS]) -]) # XORG_STRICT_OPTION - -# XORG_DEFAULT_OPTIONS -# -------------------- -# Minimum version: 1.3.0 -# -# Defines default options for X.Org modules. -# -AC_DEFUN([XORG_DEFAULT_OPTIONS], [ -AC_REQUIRE([AC_PROG_INSTALL]) -XORG_CWARNFLAGS -XORG_STRICT_OPTION -XORG_RELEASE_VERSION -XORG_CHANGELOG -XORG_INSTALL -XORG_MANPAGE_SECTIONS -m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])], - [AC_SUBST([AM_DEFAULT_VERBOSITY], [1])]) -]) # XORG_DEFAULT_OPTIONS - -# XORG_INSTALL() -# ---------------- -# Minimum version: 1.4.0 -# -# Defines the variable INSTALL_CMD as the command to copy -# INSTALL from $prefix/share/util-macros. -# -AC_DEFUN([XORG_INSTALL], [ -AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -macros_datadir=`$PKG_CONFIG --print-errors --variable=pkgdatadir xorg-macros` -INSTALL_CMD="(cp -f "$macros_datadir/INSTALL" \$(top_srcdir)/.INSTALL.tmp && \ -mv \$(top_srcdir)/.INSTALL.tmp \$(top_srcdir)/INSTALL) \ -|| (rm -f \$(top_srcdir)/.INSTALL.tmp; touch \$(top_srcdir)/INSTALL; \ -echo 'util-macros \"pkgdatadir\" from xorg-macros.pc not found: installing possibly empty INSTALL.' >&2)" -AC_SUBST([INSTALL_CMD]) -]) # XORG_INSTALL -dnl Copyright 2005 Red Hat, Inc -dnl -dnl Permission to use, copy, modify, distribute, and sell this software and its -dnl documentation for any purpose is hereby granted without fee, provided that -dnl the above copyright notice appear in all copies and that both that -dnl copyright notice and this permission notice appear in supporting -dnl documentation. -dnl -dnl The above copyright notice and this permission notice shall be included -dnl in all copies or substantial portions of the Software. -dnl -dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS -dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF -dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. -dnl IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR -dnl OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, -dnl ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -dnl OTHER DEALINGS IN THE SOFTWARE. -dnl -dnl Except as contained in this notice, the name of the copyright holders shall -dnl not be used in advertising or otherwise to promote the sale, use or -dnl other dealings in this Software without prior written authorization -dnl from the copyright holders. -dnl - -# XORG_RELEASE_VERSION -# -------------------- -# Defines PACKAGE_VERSION_{MAJOR,MINOR,PATCHLEVEL} for modules to use. - -AC_DEFUN([XORG_RELEASE_VERSION],[ - AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MAJOR], - [`echo $PACKAGE_VERSION | cut -d . -f 1`], - [Major version of this package]) - PVM=`echo $PACKAGE_VERSION | cut -d . -f 2 | cut -d - -f 1` - if test "x$PVM" = "x"; then - PVM="0" - fi - AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MINOR], - [$PVM], - [Minor version of this package]) - PVP=`echo $PACKAGE_VERSION | cut -d . -f 3 | cut -d - -f 1` - if test "x$PVP" = "x"; then - PVP="0" - fi - AC_DEFINE_UNQUOTED([PACKAGE_VERSION_PATCHLEVEL], - [$PVP], - [Patch version of this package]) -]) - -# XORG_CHANGELOG() -# ---------------- -# Minimum version: 1.2.0 -# -# Defines the variable CHANGELOG_CMD as the command to generate -# ChangeLog from git. -# -# -AC_DEFUN([XORG_CHANGELOG], [ -CHANGELOG_CMD="(GIT_DIR=\$(top_srcdir)/.git git log > \$(top_srcdir)/.changelog.tmp && \ -mv \$(top_srcdir)/.changelog.tmp \$(top_srcdir)/ChangeLog) \ -|| (rm -f \$(top_srcdir)/.changelog.tmp; touch \$(top_srcdir)/ChangeLog; \ -echo 'git directory not found: installing possibly empty changelog.' >&2)" -AC_SUBST([CHANGELOG_CMD]) -]) # XORG_CHANGELOG - -# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- -# -# Copyright © 2004 Scott James Remnant . -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# PKG_PROG_PKG_CONFIG([MIN-VERSION]) -# ---------------------------------- -AC_DEFUN([PKG_PROG_PKG_CONFIG], -[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) -m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) -AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=m4_default([$1], [0.9.0]) - AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - PKG_CONFIG="" - fi - -fi[]dnl -])# PKG_PROG_PKG_CONFIG - -# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -# -# Check to see whether a particular set of modules exists. Similar -# to PKG_CHECK_MODULES(), but does not set variables or print errors. -# -# -# Similar to PKG_CHECK_MODULES, make sure that the first instance of -# this or PKG_CHECK_MODULES is called, or make sure to call -# PKG_CHECK_EXISTS manually -# -------------------------------------------------------------- -AC_DEFUN([PKG_CHECK_EXISTS], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -if test -n "$PKG_CONFIG" && \ - AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then - m4_ifval([$2], [$2], [:]) -m4_ifvaln([$3], [else - $3])dnl -fi]) - - -# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) -# --------------------------------------------- -m4_define([_PKG_CONFIG], -[if test -n "$$1"; then - pkg_cv_[]$1="$$1" - elif test -n "$PKG_CONFIG"; then - PKG_CHECK_EXISTS([$3], - [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], - [pkg_failed=yes]) - else - pkg_failed=untried -fi[]dnl -])# _PKG_CONFIG - -# _PKG_SHORT_ERRORS_SUPPORTED -# ----------------------------- -AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi[]dnl -])# _PKG_SHORT_ERRORS_SUPPORTED - - -# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], -# [ACTION-IF-NOT-FOUND]) -# -# -# Note that if there is a possibility the first call to -# PKG_CHECK_MODULES might not happen, you should be sure to include an -# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac -# -# -# -------------------------------------------------------------- -AC_DEFUN([PKG_CHECK_MODULES], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl -AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl - -pkg_failed=no -AC_MSG_CHECKING([for $1]) - -_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) -_PKG_CONFIG([$1][_LIBS], [libs], [$2]) - -m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS -and $1[]_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details.]) - -if test $pkg_failed = yes; then - _PKG_SHORT_ERRORS_SUPPORTED - if test $_pkg_short_errors_supported = yes; then - $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1` - else - $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD - - ifelse([$4], , [AC_MSG_ERROR(dnl -[Package requirements ($2) were not met: - -$$1_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -_PKG_TEXT -])], - [AC_MSG_RESULT([no]) - $4]) -elif test $pkg_failed = untried; then - ifelse([$4], , [AC_MSG_FAILURE(dnl -[The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -_PKG_TEXT - -To get pkg-config, see .])], - [$4]) -else - $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS - $1[]_LIBS=$pkg_cv_[]$1[]_LIBS - AC_MSG_RESULT([yes]) - ifelse([$3], , :, [$3]) -fi[]dnl -])# PKG_CHECK_MODULES - --- x11proto-print-1.0.5.orig/mkinstalldirs +++ x11proto-print-1.0.5/mkinstalldirs @@ -0,0 +1,161 @@ +#! /bin/sh +# mkinstalldirs --- make directory hierarchy + +scriptversion=2006-05-11.19 + +# Original author: Noah Friedman +# Created: 1993-05-16 +# Public domain. +# +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + +nl=' +' +IFS=" "" $nl" +errstatus=0 +dirmode= + +usage="\ +Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ... + +Create each directory DIR (with mode MODE, if specified), including all +leading file name components. + +Report bugs to ." + +# process command line arguments +while test $# -gt 0 ; do + case $1 in + -h | --help | --h*) # -h for help + echo "$usage" + exit $? + ;; + -m) # -m PERM arg + shift + test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } + dirmode=$1 + shift + ;; + --version) + echo "$0 $scriptversion" + exit $? + ;; + --) # stop option processing + shift + break + ;; + -*) # unknown option + echo "$usage" 1>&2 + exit 1 + ;; + *) # first non-opt arg + break + ;; + esac +done + +for file +do + if test -d "$file"; then + shift + else + break + fi +done + +case $# in + 0) exit 0 ;; +esac + +# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and +# mkdir -p a/c at the same time, both will detect that a is missing, +# one will create a, then the other will try to create a and die with +# a "File exists" error. This is a problem when calling mkinstalldirs +# from a parallel make. We use --version in the probe to restrict +# ourselves to GNU mkdir, which is thread-safe. +case $dirmode in + '') + if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + echo "mkdir -p -- $*" + exec mkdir -p -- "$@" + else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + test -d ./-p && rmdir ./-p + test -d ./--version && rmdir ./--version + fi + ;; + *) + if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 && + test ! -d ./--version; then + echo "mkdir -m $dirmode -p -- $*" + exec mkdir -m "$dirmode" -p -- "$@" + else + # Clean up after NextStep and OpenStep mkdir. + for d in ./-m ./-p ./--version "./$dirmode"; + do + test -d $d && rmdir $d + done + fi + ;; +esac + +for file +do + case $file in + /*) pathcomp=/ ;; + *) pathcomp= ;; + esac + oIFS=$IFS + IFS=/ + set fnord $file + shift + IFS=$oIFS + + for d + do + test "x$d" = x && continue + + pathcomp=$pathcomp$d + case $pathcomp in + -*) pathcomp=./$pathcomp ;; + esac + + if test ! -d "$pathcomp"; then + echo "mkdir $pathcomp" + + mkdir "$pathcomp" || lasterr=$? + + if test ! -d "$pathcomp"; then + errstatus=$lasterr + else + if test ! -z "$dirmode"; then + echo "chmod $dirmode $pathcomp" + lasterr= + chmod "$dirmode" "$pathcomp" || lasterr=$? + + if test ! -z "$lasterr"; then + errstatus=$lasterr + fi + fi + fi + fi + + pathcomp=$pathcomp/ + done +done + +exit $errstatus + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: --- x11proto-print-1.0.5.orig/configure +++ x11proto-print-1.0.5/configure @@ -1,85 +1,62 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.68 for PrintProto 1.0.5. +# Generated by GNU Autoconf 2.61 for PrintProto 1.0.4. # # Report bugs to . # -# # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software -# Foundation, Inc. -# -# +# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; esac + fi -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' + PATH_SEPARATOR=: fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' + rm -f conf$$.sh fi -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false fi @@ -88,19 +65,20 @@ # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) +as_nl=' +' IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( +case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done IFS=$as_save_IFS ;; @@ -111,279 +89,32 @@ as_myself=$0 fi if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } fi -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in #( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - # We cannot yet assume a decent shell, so we have to provide a - # neutralization value for shells without unset; and this also - # works around shells that cannot unset nonexistent variables. - # Preserve -v and -x to the replacement shell. - BASH_ENV=/dev/null - ENV=/dev/null - (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV - export CONFIG_SHELL - case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; - esac - exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"} -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var else - $as_echo "$0: Please tell bug-autoconf@gnu.org and -$0: https://bugs.freedesktop.org/enter_bug.cgi?product=xorg -$0: about your system, including any error possibly output -$0: before this message. Then install a modern shell, or -$0: manually run the script under such a shell if you do -$0: have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error +done +# Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr @@ -397,17 +128,13 @@ as_basename=false fi -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi +# Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | +echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q @@ -422,3287 +149,1496 @@ } s/.*/./; q'` -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits +# CDPATH. +$as_unset CDPATH - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } +if test "x$CONFIG_SHELL" = x; then + if (eval ":") 2>/dev/null; then + as_have_required=yes +else + as_have_required=no +fi - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit + if test $as_have_required = yes && (eval ": +(as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 } -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file +exitcode=0 +if as_func_success; then + : else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null + exitcode=1 + echo as_func_success failed. fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' +if as_func_ret_success; then + : else - test -d ./-p && rmdir ./-p - as_mkdir_p=false + exitcode=1 + echo as_func_ret_success failed. fi -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in #( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' + exitcode=1 + echo positional parameters were not saved. fi -as_executable_p=$as_test_x -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +test \$exitcode = 0) || { (exit 1); exit 1; } -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" +( + as_lineno_1=\$LINENO + as_lineno_2=\$LINENO + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } +") 2> /dev/null; then + : +else + as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + case $as_dir in + /*) + for as_base in sh bash ksh sh5; do + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + done;; + esac +done +IFS=$as_save_IFS -test -n "$DJDIR" || exec 7<&0 &1 + for as_shell in $as_candidate_shells $SHELL; do + # Try only shells that exist, to save several forks. + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { ("$as_shell") 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` +fi -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= -# Identity of this package. -PACKAGE_NAME='PrintProto' -PACKAGE_TARNAME='printproto' -PACKAGE_VERSION='1.0.5' -PACKAGE_STRING='PrintProto 1.0.5' -PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg' -PACKAGE_URL='' +: +_ASEOF +}; then + CONFIG_SHELL=$as_shell + as_have_required=yes + if { "$as_shell" 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac -ac_unique_file="Makefile.am" -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#ifdef HAVE_SYS_TYPES_H -# include -#endif -#ifdef HAVE_SYS_STAT_H -# include -#endif -#ifdef STDC_HEADERS -# include -# include -#else -# ifdef HAVE_STDLIB_H -# include -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include -# endif -# include -#endif -#ifdef HAVE_STRINGS_H -# include -#endif -#ifdef HAVE_INTTYPES_H -# include -#endif -#ifdef HAVE_STDINT_H -# include -#endif -#ifdef HAVE_UNISTD_H -# include -#endif" - -ac_subst_vars='am__EXEEXT_FALSE -am__EXEEXT_TRUE -LTLIBOBJS -LIBOBJS -AM_BACKSLASH -AM_DEFAULT_VERBOSITY -MAN_SUBSTS -XORG_MAN_PAGE -ADMIN_MAN_DIR -DRIVER_MAN_DIR -MISC_MAN_DIR -FILE_MAN_DIR -LIB_MAN_DIR -APP_MAN_DIR -ADMIN_MAN_SUFFIX -DRIVER_MAN_SUFFIX -MISC_MAN_SUFFIX -FILE_MAN_SUFFIX -LIB_MAN_SUFFIX -APP_MAN_SUFFIX -SED -host_os -host_vendor -host_cpu -host -build_os -build_vendor -build_cpu -build -INSTALL_CMD -PKG_CONFIG -CHANGELOG_CMD -CWARNFLAGS -EGREP -GREP -CPP -am__fastdepCC_FALSE -am__fastdepCC_TRUE -CCDEPMODE -AMDEPBACKSLASH -AMDEP_FALSE -AMDEP_TRUE -am__quote -am__include -DEPDIR -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -MAINT -MAINTAINER_MODE_FALSE -MAINTAINER_MODE_TRUE -am__untar -am__tar -AMTAR -am__leading_dot -SET_MAKE -AWK -mkdir_p -MKDIR_P -INSTALL_STRIP_PROGRAM -STRIP -install_sh -MAKEINFO -AUTOHEADER -AUTOMAKE -AUTOCONF -ACLOCAL -VERSION -PACKAGE -CYGPATH_W -am__isrc -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -enable_maintainer_mode -enable_dependency_tracking -enable_strict_compilation -enable_silent_rules -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CPP -PKG_CONFIG' +fi -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE +: +(as_func_return () { + (exit $1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi - # Accept the important Cygnus configure options, so we can diagnose typos. +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; +if ( set x; as_func_ret_success y && test x = "$1" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; +test $exitcode = 0) || { (exit 1); exit 1; } - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; +( + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; +_ASEOF +}; then + break +fi - --config-cache | -C) - cache_file=config.cache ;; +fi - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; + done - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; + if test "x$CONFIG_SHELL" != x; then + for as_var in BASH_ENV ENV + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + done + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +fi - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; + if test $as_have_required = no; then + echo This script requires a shell more modern than all the + echo shells that I found on your system. Please install a + echo modern shell, or manually run the script under such a + echo shell if you do have one. + { (exit 1); exit 1; } +fi - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; +fi - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; +fi - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; +(eval "as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; +test \$exitcode = 0") || { + echo No shell found that supports shell functions. + echo Please tell autoconf@gnu.org about your system, + echo including any error possibly output before this + echo message +} - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir +fi +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - --x) - # Obsolete; use --with-x. - with_x=yes ;; +exec 7<&0 &1 - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" - ;; +# Identity of this package. +PACKAGE_NAME='PrintProto' +PACKAGE_TARNAME='printproto' +PACKAGE_VERSION='1.0.4' +PACKAGE_STRING='PrintProto 1.0.4' +PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg' - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used" >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures PrintProto 1.0.5 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/printproto] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of PrintProto 1.0.5:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-maintainer-mode enable make rules and dependencies not useful - (and sometimes confusing) to the casual installer - --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors - --enable-strict-compilation - Enable all warnings from compiler and make them - errors (default: disabled) - --enable-silent-rules less verbose build output (undo: `make V=1') - --disable-silent-rules verbose build output (undo: `make V=0') - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - CPP C preprocessor - PKG_CONFIG path to pkg-config utility - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -PrintProto configure 1.0.5 -generated by GNU Autoconf 2.68 - -Copyright (C) 2010 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_compile - -# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES -# --------------------------------------------- -# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR -# accordingly. -ac_fn_c_check_decl () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - as_decl_name=`echo $2|sed 's/ *(.*//'` - as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'` - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5 -$as_echo_n "checking whether $as_decl_name is declared... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -#ifndef $as_decl_name -#ifdef __cplusplus - (void) $as_decl_use; -#else - (void) $as_decl_name; -#endif -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_decl - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_cpp - -# ac_fn_c_try_run LINENO -# ---------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -# that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_run - -# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists and can be compiled using the include files in -# INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_compile -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by PrintProto $as_me 1.0.5, which was -generated by GNU Autoconf 2.68. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - $as_echo "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - $as_echo "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - $as_echo "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in #(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - -# Initialize Automake -am__api_version='1.11' +ac_subst_vars='SHELL +PATH_SEPARATOR +PACKAGE_NAME +PACKAGE_TARNAME +PACKAGE_VERSION +PACKAGE_STRING +PACKAGE_BUGREPORT +exec_prefix +prefix +program_transform_name +bindir +sbindir +libexecdir +datarootdir +datadir +sysconfdir +sharedstatedir +localstatedir +includedir +oldincludedir +docdir +infodir +htmldir +dvidir +pdfdir +psdir +libdir +localedir +mandir +DEFS +ECHO_C +ECHO_N +ECHO_T +LIBS +build_alias +host_alias +target_alias +INSTALL_PROGRAM +INSTALL_SCRIPT +INSTALL_DATA +am__isrc +CYGPATH_W +PACKAGE +VERSION +ACLOCAL +AUTOCONF +AUTOMAKE +AUTOHEADER +MAKEINFO +install_sh +STRIP +INSTALL_STRIP_PROGRAM +mkdir_p +AWK +SET_MAKE +am__leading_dot +AMTAR +am__tar +am__untar +LIBOBJS +LTLIBOBJS' +ac_subst_files='' + ac_precious_vars='build_alias +host_alias +target_alias' -ac_aux_dir= -for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 -fi -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if ${ac_cv_path_install+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH +ac_prev= +ac_dashdash= +for ac_option do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in #(( - ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 -$as_echo_n "checking whether build environment is sane... " >&6; } -# Just in case -sleep 1 -echo timestamp > conftest.file -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; -esac -case $srcdir in - *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; -esac - -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken -alias in your environment" "$LINENO" 5 - fi - - test "$2" = conftest.file - ) -then - # Ok. - : -else - as_fn_error $? "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. -# By default was `s,x,x', remove it if useless. -ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' -program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` - -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` - -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} -fi -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" + case $ac_option in + *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *) ac_optarg=yes ;; esac -fi - -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi + # Accept the important Cygnus configure options, so we can diagnose typos. + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + --config-cache | -C) + cache_file=config.cache ;; -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 -$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } -if test -z "$MKDIR_P"; then - if ${ac_cv_path_mkdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue - case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir (GNU coreutils) '* | \ - 'mkdir (coreutils) '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext - break 3;; - esac - done - done - done -IFS=$as_save_IFS + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; -fi + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; - test -d ./--version && rmdir ./--version - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - MKDIR_P="$ac_install_sh -d" - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 -$as_echo "$MKDIR_P" >&6; } + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` + eval enable_$ac_feature=no ;; -mkdir_p="$MKDIR_P" -case $mkdir_p in - [\\/$]* | ?:[\\/]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AWK+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` + eval enable_$ac_feature=\$ac_optarg ;; + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; - test -n "$AWK" && break -done + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 - fi -fi + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; -# Define the identity of the package. - PACKAGE='printproto' - VERSION='1.0.5' + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; -# Some tools Automake needs. + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -# Always define AMTAR for backward compatibility. + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; -AMTAR=${AMTAR-"${am_missing_run}tar"} + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; -am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` + eval with_$ac_package=\$ac_optarg ;; + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` + eval with_$ac_package=no ;; + --x) + # Obsolete; use --with-x. + with_x=yes ;; + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 -$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } - # Check whether --enable-maintainer-mode was given. -if test "${enable_maintainer_mode+set}" = set; then : - enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval -else - USE_MAINTAINER_MODE=no -fi + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 -$as_echo "$USE_MAINTAINER_MODE" >&6; } - if test $USE_MAINTAINER_MODE = yes; then - MAINTAINER_MODE_TRUE= - MAINTAINER_MODE_FALSE='#' -else - MAINTAINER_MODE_TRUE='#' - MAINTAINER_MODE_FALSE= -fi + *) + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; - MAINT=$MAINTAINER_MODE_TRUE + esac +done +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi +# Be sure to have absolute directory names. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; } +done -# Require xorg-macros 1.3 or later: XORG_DEFAULT_OPTIONS +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- +test "$silent" = yes && exec 6>/dev/null +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + { echo "$as_me: error: Working directory cannot be determined" >&2 + { (exit 1); exit 1; }; } +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + { echo "$as_me: error: pwd does not report name of working directory" >&2 + { (exit 1); exit 1; }; } +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$0" || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures PrintProto 1.0.4 to adapt to many kinds of systems. +Usage: $0 [OPTION]... [VAR=VALUE]... +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. -DEPDIR="${am__leading_dot}deps" +Defaults for the options are specified in brackets. -ac_config_commands="$ac_config_commands depfiles" +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from `make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. +For better control, use the options below. -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/printproto] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF -# Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : - enableval=$enable_dependency_tracking; -fi + cat <<\_ACEOF -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names +_ACEOF fi +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of PrintProto 1.0.4:";; + esac + cat <<\_ACEOF -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-release-version=STRING + Use release version string in package name -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } +Report bugs to . +_ACEOF +ac_status=$? fi +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || continue + ac_builddir=. -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } fi +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +PrintProto configure 1.0.4 +generated by GNU Autoconf 2.61 - fi +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi +It was created by PrintProto $as_me 1.0.4, which was +generated by GNU Autoconf 2.61. Invocation command line was + $ $0 $@ -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi + echo "PATH: $as_dir" done - done IFS=$as_save_IFS -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - +} >&5 -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done +cat >&5 <<_ACEOF -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int -main () -{ +## ----------- ## +## Core tests. ## +## ----------- ## - ; - return 0; -} _ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" -ac_rmfiles= -for ac_file in $ac_files +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args '$ac_arg'" + ;; + esac + done done -rm -f $ac_rmfiles +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + echo "$ac_var='\''$ac_val'\''" + done | sort + echo -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------------- ## +## File substitutions. ## +## ------------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + cat confdefs.h + echo fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h -int -main () -{ +# Predefined preprocessor variables. - ; - return 0; -} +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - ; - return 0; -} +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi + + +# Let the site file select an alternate cache file if it wants to. +# Prefer explicitly selected file to automatically selected ones. +if test -n "$CONFIG_SITE"; then + set x "$CONFIG_SITE" +elif test "x$prefix" != xNONE; then + set x "$prefix/share/config.site" "$prefix/etc/config.site" else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi + set x "$ac_default_prefix/share/config.site" \ + "$ac_default_prefix/etc/config.site" fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +shift +for ac_site_file do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi done -rm -f conftest.$ac_ext -CC=$ac_save_CC +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -depcc="$CC" am_compiler_list= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C99" >&5 -$as_echo_n "checking for $CC option to accept ISO C99... " >&6; } -if ${ac_cv_prog_cc_c99+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c99=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include -#include -// Check varargs macros. These examples are taken from C99 6.10.3.5. -#define debug(...) fprintf (stderr, __VA_ARGS__) -#define showlist(...) puts (#__VA_ARGS__) -#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__)) -static void -test_varargs_macros (void) -{ - int x = 1234; - int y = 5678; - debug ("Flag"); - debug ("X = %d\n", x); - showlist (The first, second, and third items.); - report (x>y, "x is %d but y is %d", x, y); -} -// Check long long types. -#define BIG64 18446744073709551615ull -#define BIG32 4294967295ul -#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0) -#if !BIG_OK - your preprocessor is broken; -#endif -#if BIG_OK -#else - your preprocessor is broken; -#endif -static long long int bignum = -9223372036854775807LL; -static unsigned long long int ubignum = BIG64; -struct incomplete_array -{ - int datasize; - double data[]; -}; - -struct named_init { - int number; - const wchar_t *name; - double average; -}; -typedef const char *ccp; -static inline int -test_restrict (ccp restrict text) -{ - // See if C++-style comments work. - // Iterate through items via the restricted pointer. - // Also check for declarations in for loops. - for (unsigned int i = 0; *(text+i) != '\0'; ++i) - continue; - return 0; -} -// Check varargs and va_copy. -static void -test_varargs (const char *format, ...) -{ - va_list args; - va_start (args, format); - va_list args_copy; - va_copy (args_copy, args); - - const char *str; - int number; - float fnumber; - - while (*format) - { - switch (*format++) - { - case 's': // string - str = va_arg (args_copy, const char *); - break; - case 'd': // int - number = va_arg (args_copy, int); - break; - case 'f': // float - fnumber = va_arg (args_copy, double); - break; - default: - break; - } - } - va_end (args_copy); - va_end (args); -} -int -main () -{ - // Check bool. - _Bool success = false; - // Check restrict. - if (test_restrict ("String literal") == 0) - success = true; - char *restrict newvar = "Another string"; - - // Check varargs. - test_varargs ("s, d' f .", "string", 65, 34.234); - test_varargs_macros (); - - // Check flexible array members. - struct incomplete_array *ia = - malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10)); - ia->datasize = 10; - for (int i = 0; i < ia->datasize; ++i) - ia->data[i] = i * 1.234; - - // Check named initializers. - struct named_init ni = { - .number = 34, - .name = L"Test wide string", - .average = 543.34343, - }; - - ni.number = 58; - - int dynamic_array[ni.number]; - dynamic_array[ni.number - 1] = 543; - - // work around unused variable warnings - return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x' - || dynamic_array[ni.number - 1] != 543); - ; - return 0; -} -_ACEOF -for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -xc99=all -qlanglvl=extc99 -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c99=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c99" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c99" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c99" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5 -$as_echo "$ac_cv_prog_cc_c99" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c99" != xno; then : -fi + @@ -3711,720 +1647,507 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext +am__api_version='1.10' +ac_aux_dir= +for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break +if test -z "$ac_aux_dir"; then + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 +echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} + { (exit 1); exit 1; }; } fi - done - ac_cv_prog_CPP=$CPP +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. -fi - CPP=$ac_cv_prog_CPP + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + done + done + ;; +esac +done +IFS=$as_save_IFS -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break fi -rm -f conftest.err conftest.i conftest.$ac_ext + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6; } -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&5 +echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&2;} + { (exit 1); exit 1; }; } + fi + + test "$2" = conftest.file + ) +then + # Ok. + : else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } + { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! +Check your system clock" >&5 +echo "$as_me: error: newly created file is older than distributed files! +Check your system clock" >&2;} + { (exit 1); exit 1; }; } fi +{ echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. echo might interpret backslashes. +# By default was `s,x,x', remove it if useless. +cat <<\_ACEOF >conftest.sed +s/[\\$]/&&/g;s/;s,x,x,$// +_ACEOF +program_transform_name=`echo $program_transform_name | sed -f conftest.sed` +rm -f conftest.sed -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 +echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} +fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if ${ac_cv_path_GREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST +{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 +echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; } +if test -z "$MKDIR_P"; then + if test "${ac_cv_path_mkdir+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done +done IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP + fi + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + test -d ./--version && rmdir ./--version + MKDIR_P="$ac_install_sh -d" + fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" +{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5 +echo "${ECHO_T}$MKDIR_P" >&6; } +mkdir_p="$MKDIR_P" +case $mkdir_p in + [\\/$]* | ?:[\\/]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if ${ac_cv_path_EGREP+:} false; then : - $as_echo_n "(cached) " >&6 +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_AWK+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AWK="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi +done +done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { echo "$as_me:$LINENO: result: $AWK" >&5 +echo "${ECHO_T}$AWK" >&6; } else - ac_cv_path_EGREP=$EGREP + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include -int -main () -{ + test -n "$AWK" && break +done - ; - return 0; -} +{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } +set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } + SET_MAKE= else - ac_cv_header_stdc=no + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. else - ac_cv_header_stdc=no + am__leading_dot=_ fi -rm -f conftest* +rmdir .tst 2>/dev/null +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } + fi fi -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : -else - ac_cv_header_stdc=no -fi -rm -f conftest* +# Define the identity of the package. + PACKAGE='printproto' + VERSION='1.0.4' -fi -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" _ACEOF -if ac_fn_c_try_run "$LINENO"; then : -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF -$as_echo "#define STDC_HEADERS 1" >>confdefs.h +# Some tools Automake needs. -fi +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF -fi +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} -done + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. -set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_PKG_CONFIG+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} + +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS - ;; -esac fi -PKG_CONFIG=$ac_cv_path_PKG_CONFIG -if test -n "$PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 -$as_echo "$PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { echo "$as_me:$LINENO: result: $STRIP" >&5 +echo "${ECHO_T}$STRIP" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi fi -if test -z "$ac_cv_path_PKG_CONFIG"; then - ac_pt_PKG_CONFIG=$PKG_CONFIG - # Extract the first word of "pkg-config", so it can be a program name with args. -set dummy pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $ac_pt_PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_ac_ct_STRIP="strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS - ;; -esac fi -ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG -if test -n "$ac_pt_PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 -$as_echo "$ac_pt_PKG_CONFIG" >&6; } +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +echo "${ECHO_T}$ac_ct_STRIP" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - if test "x$ac_pt_PKG_CONFIG" = x; then - PKG_CONFIG="" + if test "x$ac_ct_STRIP" = x; then + STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac - PKG_CONFIG=$ac_pt_PKG_CONFIG - fi -else - PKG_CONFIG="$ac_cv_path_PKG_CONFIG" -fi - -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=0.9.0 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 -$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - PKG_CONFIG="" - fi - -fi -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if ${ac_cv_build+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if ${ac_cv_host+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 -$as_echo_n "checking for a sed that does not truncate output... " >&6; } -if ${ac_cv_path_SED+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ - for ac_i in 1 2 3 4 5 6 7; do - ac_script="$ac_script$as_nl$ac_script" - done - echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed - { ac_script=; unset ac_script;} - if test -z "$SED"; then - ac_path_SED_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue -# Check for GNU ac_path_SED and select it if it is found. - # Check for GNU $ac_path_SED -case `"$ac_path_SED" --version 2>&1` in -*GNU*) - ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo '' >> "conftest.nl" - "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_SED_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_SED="$ac_path_SED" - ac_path_SED_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_SED_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_SED"; then - as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + STRIP=$ac_ct_STRIP fi else - ac_cv_path_SED=$SED + STRIP="$ac_cv_prog_STRIP" fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 -$as_echo "$ac_cv_path_SED" >&6; } - SED="$ac_cv_path_SED" - rm -f conftest.sed - - - +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. -if test "x$GCC" = xyes ; then - CWARNFLAGS="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes \ --Wmissing-declarations -Wnested-externs -fno-strict-aliasing \ --Wbad-function-cast -Wformat=2" - case `$CC -dumpversion` in - 3.4.* | 4.*) - CWARNFLAGS="$CWARNFLAGS -Wold-style-definition -Wdeclaration-after-statement" - ;; - esac -else - ac_fn_c_check_decl "$LINENO" "__SUNPRO_C" "ac_cv_have_decl___SUNPRO_C" "$ac_includes_default" -if test "x$ac_cv_have_decl___SUNPRO_C" = xyes; then : - SUNCC="yes" -else - SUNCC="no" -fi +AMTAR=${AMTAR-"${am_missing_run}tar"} - if test "x$SUNCC" = "xyes"; then - CWARNFLAGS="-v" - fi -fi +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' -# If the module's configure.ac calls AC_PROG_CC later on, CC gets set to C89 -# Check whether --enable-strict-compilation was given. -if test "${enable_strict_compilation+set}" = set; then : - enableval=$enable_strict_compilation; STRICT_COMPILE=$enableval -else - STRICT_COMPILE=no -fi -if test "x$STRICT_COMPILE" = "xyes"; then - ac_fn_c_check_decl "$LINENO" "__SUNPRO_C" "ac_cv_have_decl___SUNPRO_C" "$ac_includes_default" -if test "x$ac_cv_have_decl___SUNPRO_C" = xyes; then : - SUNCC="yes" -else - SUNCC="no" -fi - ac_fn_c_check_decl "$LINENO" "__INTEL_COMPILER" "ac_cv_have_decl___INTEL_COMPILER" "$ac_includes_default" -if test "x$ac_cv_have_decl___INTEL_COMPILER" = xyes; then : - INTELCC="yes" -else - INTELCC="no" +# Check whether --with-release-version was given. +if test "${with_release_version+set}" = set; then + withval=$with_release_version; RELEASE_VERSION="$withval" +else + RELEASE_VERSION="" fi - if test "x$GCC" = xyes ; then - STRICT_CFLAGS="-pedantic -Werror" - elif test "x$SUNCC" = "xyes"; then - STRICT_CFLAGS="-errwarn" - elif test "x$INTELCC" = "xyes"; then - STRICT_CFLAGS="-Werror" + if test "x$RELEASE_VERSION" != "x"; then + PACKAGE="$PACKAGE-$RELEASE_VERSION" + PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION" + { echo "$as_me:$LINENO: Building with package name set to $PACKAGE" >&5 +echo "$as_me: Building with package name set to $PACKAGE" >&6;} fi -fi -CWARNFLAGS="$CWARNFLAGS $STRICT_CFLAGS" - - - cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION_MAJOR `echo $PACKAGE_VERSION | cut -d . -f 1` @@ -4450,125 +2173,6 @@ -CHANGELOG_CMD="(GIT_DIR=\$(top_srcdir)/.git git log > \$(top_srcdir)/.changelog.tmp && \ -mv \$(top_srcdir)/.changelog.tmp \$(top_srcdir)/ChangeLog) \ -|| (rm -f \$(top_srcdir)/.changelog.tmp; touch \$(top_srcdir)/ChangeLog; \ -echo 'git directory not found: installing possibly empty changelog.' >&2)" - - - - -macros_datadir=`$PKG_CONFIG --print-errors --variable=pkgdatadir xorg-macros` -INSTALL_CMD="(cp -f "$macros_datadir/INSTALL" \$(top_srcdir)/.INSTALL.tmp && \ -mv \$(top_srcdir)/.INSTALL.tmp \$(top_srcdir)/INSTALL) \ -|| (rm -f \$(top_srcdir)/.INSTALL.tmp; touch \$(top_srcdir)/INSTALL; \ -echo 'util-macros \"pkgdatadir\" from xorg-macros.pc not found: installing possibly empty INSTALL.' >&2)" - - - - - - -if test x$APP_MAN_SUFFIX = x ; then - APP_MAN_SUFFIX=1 -fi -if test x$APP_MAN_DIR = x ; then - APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)' -fi - -if test x$LIB_MAN_SUFFIX = x ; then - LIB_MAN_SUFFIX=3 -fi -if test x$LIB_MAN_DIR = x ; then - LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)' -fi - -if test x$FILE_MAN_SUFFIX = x ; then - case $host_os in - solaris*) FILE_MAN_SUFFIX=4 ;; - *) FILE_MAN_SUFFIX=5 ;; - esac -fi -if test x$FILE_MAN_DIR = x ; then - FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)' -fi - -if test x$MISC_MAN_SUFFIX = x ; then - case $host_os in - solaris*) MISC_MAN_SUFFIX=5 ;; - *) MISC_MAN_SUFFIX=7 ;; - esac -fi -if test x$MISC_MAN_DIR = x ; then - MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)' -fi - -if test x$DRIVER_MAN_SUFFIX = x ; then - case $host_os in - solaris*) DRIVER_MAN_SUFFIX=7 ;; - *) DRIVER_MAN_SUFFIX=4 ;; - esac -fi -if test x$DRIVER_MAN_DIR = x ; then - DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)' -fi - -if test x$ADMIN_MAN_SUFFIX = x ; then - case $host_os in - solaris*) ADMIN_MAN_SUFFIX=1m ;; - *) ADMIN_MAN_SUFFIX=8 ;; - esac -fi -if test x$ADMIN_MAN_DIR = x ; then - ADMIN_MAN_DIR='$(mandir)/man$(ADMIN_MAN_SUFFIX)' -fi - - - - - - - - - - - - - - - -XORG_MAN_PAGE="X Version 11" - -MAN_SUBSTS="\ - -e 's|__vendorversion__|\"\$(PACKAGE_STRING)\" \"\$(XORG_MAN_PAGE)\"|' \ - -e 's|__xorgversion__|\"\$(PACKAGE_STRING)\" \"\$(XORG_MAN_PAGE)\"|' \ - -e 's|__xservername__|Xorg|g' \ - -e 's|__xconfigfile__|xorg.conf|g' \ - -e 's|__projectroot__|\$(prefix)|g' \ - -e 's|__apploaddir__|\$(appdefaultdir)|g' \ - -e 's|__appmansuffix__|\$(APP_MAN_SUFFIX)|g' \ - -e 's|__drivermansuffix__|\$(DRIVER_MAN_SUFFIX)|g' \ - -e 's|__adminmansuffix__|\$(ADMIN_MAN_SUFFIX)|g' \ - -e 's|__libmansuffix__|\$(LIB_MAN_SUFFIX)|g' \ - -e 's|__miscmansuffix__|\$(MISC_MAN_SUFFIX)|g' \ - -e 's|__filemansuffix__|\$(FILE_MAN_SUFFIX)|g'" - - - -# Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; -fi - -case $enable_silent_rules in -yes) AM_DEFAULT_VERBOSITY=0;; -no) AM_DEFAULT_VERBOSITY=1;; -*) AM_DEFAULT_VERBOSITY=0;; -esac -AM_BACKSLASH='\' - - - ac_config_files="$ac_config_files Makefile printproto.pc" cat >confcache <<\_ACEOF @@ -4598,13 +2202,12 @@ case $ac_val in #( *${as_nl}*) case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; + *) $as_unset $ac_var ;; esac ;; esac done @@ -4612,8 +2215,8 @@ (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" @@ -4635,24 +2238,13 @@ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi + test "x$cache_file" != "x/dev/null" && + { echo "$as_me:$LINENO: updating cache $cache_file" >&5 +echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 +echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache @@ -4669,12 +2261,6 @@ # take arguments), then branch to the quote section. Otherwise, # look for a macro that doesn't take arguments. ac_script=' -:mline -/\\$/{ - N - s,\\\n,, - b mline -} t clear :clear s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g @@ -4701,50 +2287,27 @@ ac_libobjs= ac_ltlibobjs= -U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + ac_i=`echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then - as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 +: ${CONFIG_STATUS=./config.status} ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. @@ -4754,79 +2317,59 @@ debug=false ac_cs_recheck=false ac_cs_silent=false - SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; esac + fi -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' + PATH_SEPARATOR=: fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' + rm -f conf$$.sh fi -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false fi @@ -4835,19 +2378,20 @@ # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) +as_nl=' +' IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( +case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done IFS=$as_save_IFS ;; @@ -4858,111 +2402,32 @@ as_myself=$0 fi if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } fi -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - +done +# Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr @@ -4976,17 +2441,13 @@ as_basename=false fi -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi +# Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | +echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q @@ -5001,103 +2462,104 @@ } s/.*/./; q'` -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits +# CDPATH. +$as_unset CDPATH + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( +case `echo -n x` in -n*) - case `echo 'xy\c'` in + case `echo 'x\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; + *) ECHO_C='\c';; esac;; *) ECHO_N='-n';; esac +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null + mkdir conf$$.dir fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' - fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' + as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false @@ -5114,12 +2576,12 @@ as_test_x=' eval sh -c '\'' if test -d "$1"; then - test -d "$1/."; + test -d "$1/."; else - case $1 in #( - -*)set "./$1";; + case $1 in + -*)set "./$1";; esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ???[sx]*):;;*)false;;esac;fi '\'' sh ' @@ -5134,19 +2596,13 @@ exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to +# Save the log message, to keep $[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by PrintProto $as_me 1.0.5, which was -generated by GNU Autoconf 2.68. Invocation command line was +This file was extended by PrintProto $as_me 1.0.4, which was +generated by GNU Autoconf 2.61. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -5159,54 +2615,40 @@ _ACEOF -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>$CONFIG_STATUS <<_ACEOF # Files that config.status was made for. config_files="$ac_config_files" -config_commands="$ac_config_commands" _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +cat >>$CONFIG_STATUS <<\_ACEOF ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. +\`$as_me' instantiates files from templates according to the +current configuration. -Usage: $0 [OPTION]... [TAG]... +Usage: $0 [OPTIONS] [FILE]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages + -q, --quiet do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE Configuration files: $config_files -Configuration commands: -$config_commands - -Report bugs to ." +Report bugs to ." _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ -PrintProto config.status 1.0.5 -configured by $0, generated by GNU Autoconf 2.68, - with options \\"\$ac_cs_config\\" +PrintProto config.status 1.0.4 +configured by $0, generated by GNU Autoconf 2.61, + with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" -Copyright (C) 2010 Free Software Foundation, Inc. +Copyright (C) 2006 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." @@ -5214,26 +2656,20 @@ srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. ac_need_defaults=: while test $# != 0 do case $1 in - --*=?*) + --*=*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; *) ac_option=$1 ac_optarg=$2 @@ -5246,30 +2682,25 @@ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; + echo "$ac_cs_version"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" + CONFIG_FILES="$CONFIG_FILES $ac_optarg" ac_need_defaults=false;; --he | --h | --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; + echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; + -*) { echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; - *) as_fn_append ac_config_targets " $1" + *) ac_config_targets="$ac_config_targets $1" ac_need_defaults=false ;; esac @@ -5284,47 +2715,41 @@ fi _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>$CONFIG_STATUS <<_ACEOF if \$ac_cs_recheck; then - set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' + echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + CONFIG_SHELL=$SHELL export CONFIG_SHELL - exec "\$@" + exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion fi _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +cat >>$CONFIG_STATUS <<\_ACEOF exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX - $as_echo "$ac_log" + echo "$ac_log" } >&5 _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - +cat >>$CONFIG_STATUS <<_ACEOF _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +cat >>$CONFIG_STATUS <<\_ACEOF # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "printproto.pc") CONFIG_FILES="$CONFIG_FILES printproto.pc" ;; - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; esac done @@ -5335,7 +2760,6 @@ # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree @@ -5346,194 +2770,172 @@ # after its creation but before its name has been assigned to `$tmp'. $debug || { - tmp= ac_tmp= + tmp= trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ' 0 - trap 'as_fn_exit 1' 1 2 13 15 + trap '{ (exit 1); exit 1; }' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" + test -n "$tmp" && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} +# +# Set up the sed scripts for CONFIG_FILES section. +# -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "$CONFIG_FILES"; then -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && _ACEOF -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` + ac_delim='%!_!# ' for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + cat >conf$$subs.sed <<_ACEOF +SHELL!$SHELL$ac_delim +PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim +PACKAGE_NAME!$PACKAGE_NAME$ac_delim +PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim +PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim +PACKAGE_STRING!$PACKAGE_STRING$ac_delim +PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim +exec_prefix!$exec_prefix$ac_delim +prefix!$prefix$ac_delim +program_transform_name!$program_transform_name$ac_delim +bindir!$bindir$ac_delim +sbindir!$sbindir$ac_delim +libexecdir!$libexecdir$ac_delim +datarootdir!$datarootdir$ac_delim +datadir!$datadir$ac_delim +sysconfdir!$sysconfdir$ac_delim +sharedstatedir!$sharedstatedir$ac_delim +localstatedir!$localstatedir$ac_delim +includedir!$includedir$ac_delim +oldincludedir!$oldincludedir$ac_delim +docdir!$docdir$ac_delim +infodir!$infodir$ac_delim +htmldir!$htmldir$ac_delim +dvidir!$dvidir$ac_delim +pdfdir!$pdfdir$ac_delim +psdir!$psdir$ac_delim +libdir!$libdir$ac_delim +localedir!$localedir$ac_delim +mandir!$mandir$ac_delim +DEFS!$DEFS$ac_delim +ECHO_C!$ECHO_C$ac_delim +ECHO_N!$ECHO_N$ac_delim +ECHO_T!$ECHO_T$ac_delim +LIBS!$LIBS$ac_delim +build_alias!$build_alias$ac_delim +host_alias!$host_alias$ac_delim +target_alias!$target_alias$ac_delim +INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim +INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim +INSTALL_DATA!$INSTALL_DATA$ac_delim +am__isrc!$am__isrc$ac_delim +CYGPATH_W!$CYGPATH_W$ac_delim +PACKAGE!$PACKAGE$ac_delim +VERSION!$VERSION$ac_delim +ACLOCAL!$ACLOCAL$ac_delim +AUTOCONF!$AUTOCONF$ac_delim +AUTOMAKE!$AUTOMAKE$ac_delim +AUTOHEADER!$AUTOHEADER$ac_delim +MAKEINFO!$MAKEINFO$ac_delim +install_sh!$install_sh$ac_delim +STRIP!$STRIP$ac_delim +INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim +mkdir_p!$mkdir_p$ac_delim +AWK!$AWK$ac_delim +SET_MAKE!$SET_MAKE$ac_delim +am__leading_dot!$am__leading_dot$ac_delim +AMTAR!$AMTAR$ac_delim +am__tar!$am__tar$ac_delim +am__untar!$am__untar$ac_delim +LIBOBJS!$LIBOBJS$ac_delim +LTLIBOBJS!$LTLIBOBJS$ac_delim +_ACEOF - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then + if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 61; then break elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done -rm -f conf$$subs.sh -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` +if test -n "$ac_eof"; then + ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` + ac_eof=`expr $ac_eof + 1` +fi + +cat >>$CONFIG_STATUS <<_ACEOF +cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end +_ACEOF +sed ' +s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g +s/^/s,@/; s/!/@,|#_!!_#|/ +:n +t n +s/'"$ac_delim"'$/,g/; t +s/$/\\/; p +N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n +' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF +:end +s/|#_!!_#|//g +CEOF$ac_eof _ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/ +s/:*\${srcdir}:*/:/ +s/:*@srcdir@:*/:/ +s/^\([^=]*=[ ]*\):*/\1/ s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// s/^[^=]*=[ ]*$// }' fi -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +cat >>$CONFIG_STATUS <<\_ACEOF fi # test -n "$CONFIG_FILES" -eval set X " :F $CONFIG_FILES :C $CONFIG_COMMANDS" -shift -for ac_tag +for ac_tag in :F $CONFIG_FILES do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 +echo "$as_me: error: Invalid tag $ac_tag." >&2;} + { (exit 1); exit 1; }; };; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac @@ -5552,7 +2954,7 @@ for ac_f do case $ac_f in - -) ac_f="$ac_tmp/stdin";; + -) ac_f="$tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. @@ -5561,34 +2963,26 @@ [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +echo "$as_me: error: cannot find input file: $ac_f" >&2;} + { (exit 1); exit 1; }; };; esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" + ac_file_inputs="$ac_file_inputs $ac_f" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' + configure_input="Generated from "`IFS=: + echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + *:-:* | *:-) cat >"$tmp/stdin";; esac ;; esac @@ -5598,7 +2992,42 @@ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q @@ -5616,15 +3045,20 @@ q } s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; @@ -5669,12 +3103,12 @@ esac _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +cat >>$CONFIG_STATUS <<\_ACEOF # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { + +case `sed -n '/datarootdir/ { p q } @@ -5682,37 +3116,36 @@ /@docdir@/p /@infodir@/p /@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +/@mandir@/p +' $ac_file_inputs` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>$CONFIG_STATUS <<_ACEOF ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; + s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub $extrasub _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +cat >>$CONFIG_STATUS <<\_ACEOF :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t +s&@configure_input@&$configure_input&;t t s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t @@ -5723,142 +3156,35 @@ s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 +" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&5 +echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&2;} - rm -f "$ac_tmp/stdin" + rm -f "$tmp/stdin" case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + -) cat "$tmp/out"; rm -f "$tmp/out";; + *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; + esac ;; - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Autoconf 2.62 quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - esac done # for ac_tag -as_fn_exit 0 +{ (exit 0); exit 0; } _ACEOF +chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. @@ -5878,10 +3204,6 @@ exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} + $ac_cs_success || { (exit 1); exit 1; } fi --- x11proto-print-1.0.5.orig/Makefile.in +++ x11proto-print-1.0.5/Makefile.in @@ -1,9 +1,8 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. +# Makefile.in generated by automake 1.10.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -18,9 +17,8 @@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -33,28 +31,19 @@ NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ subdir = . -DIST_COMMON = README $(am__configure_deps) $(print_HEADERS) \ +DIST_COMMON = $(am__configure_deps) $(print_HEADERS) \ $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(srcdir)/printproto.pc.in $(top_srcdir)/configure COPYING \ - ChangeLog config.guess config.sub install-sh missing + ChangeLog install-sh missing mkinstalldirs ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno -mkinstalldirs = $(install_sh) -d +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_CLEAN_FILES = printproto.pc -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; @@ -62,25 +51,11 @@ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(miscmandir)" \ - "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(printdir)" -DATA = $(miscman_DATA) $(pkgconfig_DATA) +am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +am__installdirs = "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(printdir)" +pkgconfigDATA_INSTALL = $(INSTALL_DATA) +DATA = $(pkgconfig_DATA) +printHEADERS_INSTALL = $(INSTALL_HEADER) HEADERS = $(print_HEADERS) ETAGS = etags CTAGS = ctags @@ -88,114 +63,61 @@ distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ - { test ! -d "$(distdir)" \ - || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr "$(distdir)"; }; } + { test ! -d $(distdir) \ + || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr $(distdir); }; } DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ -ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ -ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -APP_MAN_DIR = @APP_MAN_DIR@ -APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CHANGELOG_CMD = @CHANGELOG_CMD@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CWARNFLAGS = @CWARNFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ -DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FILE_MAN_DIR = @FILE_MAN_DIR@ -FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ -GREP = @GREP@ INSTALL = @INSTALL@ -INSTALL_CMD = @INSTALL_CMD@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ -LIB_MAN_DIR = @LIB_MAN_DIR@ -LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ -MAN_SUBSTS = \ - -e 's|__vendorversion__|"$(XORGRELSTRING)" "$(XORGMANNAME)"|' \ - -e 's|__xorgversion__|"$(XORGRELSTRING)" "$(XORGMANNAME)"|' \ - -e 's|__datadir__|$(datadir)|g' \ - -e 's|__libdir__|$(libdir)|g' \ - -e 's|__sysconfdir__|$(sysconfdir)|g' \ - -e 's|__appmansuffix__|$(APP_MAN_SUFFIX)|g' \ - -e 's|__libmansuffix__|$(LIB_MAN_SUFFIX)|g' \ - -e 's|__miscmansuffix__|$(MISC_MAN_SUFFIX)|g' - -MISC_MAN_DIR = @MISC_MAN_DIR@ -MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ MKDIR_P = @MKDIR_P@ -OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -SED = sed SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ -XORG_MAN_PAGE = @XORG_MAN_PAGE@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -am__include = @am__include@ am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ -build = @build@ build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ -host = @host@ host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ @@ -216,7 +138,6 @@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ printdir = $(includedir)/X11/extensions @@ -226,38 +147,26 @@ pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = printproto.pc -miscmandir = $(MISC_MAN_DIR) -miscman_DATA = man/Xprint.$(MISC_MAN_SUFFIX) -CLEANFILES = $(miscman_DATA) -EXTRA_DIST = printproto.pc.in man/Xprint.man man/Xprint.sgml \ - specs/xp_proto.book specs/xp_proto.mif specs/xp_proto.ps \ - specs/xp_protoIX.doc specs/xp_protoTOC.doc \ - specs/xp_proto_cov.mif ChangeLog +EXTRA_DIST = autogen.sh printproto.pc.in ChangeLog MAINTAINERCLEANFILES = ChangeLog - -# Strings to replace in man pages -XORGRELSTRING = @PACKAGE_STRING@ -XORGMANNAME = X Version 11 -SUFFIXES = .$(MISC_MAN_SUFFIX) .man all: all-am .SUFFIXES: -.SUFFIXES: .$(MISC_MAN_SUFFIX) .man am--refresh: @: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ - $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ + cd $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -272,87 +181,60 @@ $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - $(am__cd) $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -$(am__aclocal_m4_deps): +$(top_srcdir)/configure: $(am__configure_deps) + cd $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) printproto.pc: $(top_builddir)/config.status $(srcdir)/printproto.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ -install-miscmanDATA: $(miscman_DATA) - @$(NORMAL_INSTALL) - test -z "$(miscmandir)" || $(MKDIR_P) "$(DESTDIR)$(miscmandir)" - @list='$(miscman_DATA)'; test -n "$(miscmandir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(miscmandir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(miscmandir)" || exit $$?; \ - done - -uninstall-miscmanDATA: - @$(NORMAL_UNINSTALL) - @list='$(miscman_DATA)'; test -n "$(miscmandir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(miscmandir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(miscmandir)" && rm -f $$files install-pkgconfigDATA: $(pkgconfig_DATA) @$(NORMAL_INSTALL) test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" - @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ - for p in $$list; do \ + @list='$(pkgconfig_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ + f=$(am__strip_dir) \ + echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ + $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \ done uninstall-pkgconfigDATA: @$(NORMAL_UNINSTALL) - @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files + @list='$(pkgconfig_DATA)'; for p in $$list; do \ + f=$(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ + rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \ + done install-printHEADERS: $(print_HEADERS) @$(NORMAL_INSTALL) test -z "$(printdir)" || $(MKDIR_P) "$(DESTDIR)$(printdir)" - @list='$(print_HEADERS)'; test -n "$(printdir)" || list=; \ - for p in $$list; do \ + @list='$(print_HEADERS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(printdir)'"; \ - $(INSTALL_HEADER) $$files "$(DESTDIR)$(printdir)" || exit $$?; \ + f=$(am__strip_dir) \ + echo " $(printHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(printdir)/$$f'"; \ + $(printHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(printdir)/$$f"; \ done uninstall-printHEADERS: @$(NORMAL_UNINSTALL) - @list='$(print_HEADERS)'; test -n "$(printdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(printdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(printdir)" && rm -f $$files + @list='$(print_HEADERS)'; for p in $$list; do \ + f=$(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(printdir)/$$f'"; \ + rm -f "$(DESTDIR)$(printdir)/$$f"; \ + done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - set x; \ + tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ @@ -360,41 +242,36 @@ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) + tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique + $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) - test -d "$(distdir)" || mkdir "$(distdir)" + test -d $(distdir) || mkdir $(distdir) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -410,30 +287,24 @@ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook - -test -n "$(am__skip_mode_fix)" \ - || find "$(distdir)" -type d ! -perm -755 \ - -exec chmod u+rwx,go+rx {} \; -o \ + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r "$(distdir)" + || chmod -R a+r $(distdir) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) @@ -445,10 +316,6 @@ tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma $(am__remove_distdir) -dist-xz: distdir - tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz - $(am__remove_distdir) - dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) @@ -473,17 +340,15 @@ distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ - bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lzma*) \ - lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ - *.tar.xz*) \ - xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac @@ -491,11 +356,9 @@ mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) - test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build \ + && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ @@ -517,15 +380,13 @@ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ - && cd "$$am__cwd" \ - || exit 1 + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: - @$(am__cd) '$(distuninstallcheck_dir)' \ + @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ @@ -546,7 +407,7 @@ check: check-am all-am: Makefile $(DATA) $(HEADERS) installdirs: - for dir in "$(DESTDIR)$(miscmandir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(printdir)"; do \ + for dir in "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(printdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am @@ -566,11 +427,9 @@ mostlyclean-generic: clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -591,39 +450,26 @@ html: html-am -html-am: - info: info-am info-am: -install-data-am: install-miscmanDATA install-pkgconfigDATA \ - install-printHEADERS +install-data-am: install-pkgconfigDATA install-printHEADERS install-dvi: install-dvi-am -install-dvi-am: - install-exec-am: install-html: install-html-am -install-html-am: - install-info: install-info-am -install-info-am: - install-man: install-pdf: install-pdf-am -install-pdf-am: - install-ps: install-ps-am -install-ps-am: - installcheck-am: maintainer-clean: maintainer-clean-am @@ -644,40 +490,32 @@ ps-am: -uninstall-am: uninstall-miscmanDATA uninstall-pkgconfigDATA \ - uninstall-printHEADERS +uninstall-am: uninstall-pkgconfigDATA uninstall-printHEADERS .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \ clean-generic ctags dist dist-all dist-bzip2 dist-gzip \ - dist-hook dist-lzma dist-shar dist-tarZ dist-xz dist-zip \ - distcheck distclean distclean-generic distclean-tags \ - distcleancheck distdir distuninstallcheck dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-miscmanDATA install-pdf \ - install-pdf-am install-pkgconfigDATA install-printHEADERS \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ + dist-hook dist-lzma dist-shar dist-tarZ dist-zip distcheck \ + distclean distclean-generic distclean-tags distcleancheck \ + distdir distuninstallcheck dvi dvi-am html html-am info \ + info-am install install-am install-data install-data-am \ + install-dvi install-dvi-am install-exec install-exec-am \ + install-html install-html-am install-info install-info-am \ + install-man install-pdf install-pdf-am install-pkgconfigDATA \ + install-printHEADERS install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ pdf-am ps ps-am tags uninstall uninstall-am \ - uninstall-miscmanDATA uninstall-pkgconfigDATA \ - uninstall-printHEADERS + uninstall-pkgconfigDATA uninstall-printHEADERS .PHONY: ChangeLog ChangeLog: - $(CHANGELOG_CMD) + (GIT_DIR=$(top_srcdir)/.git git-log > .changelog.tmp && mv .changelog.tmp ChangeLog; rm -f .changelog.tmp) || (touch ChangeLog; echo 'git directory not found: installing possibly empty changelog.' >&2) dist-hook: ChangeLog - -.man.$(MISC_MAN_SUFFIX): man - $(MKDIR_P) man - $(AM_V_GEN)$(SED) $(MAN_SUBSTS) < $< > $@ - # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: --- x11proto-print-1.0.5.orig/missing +++ x11proto-print-1.0.5/missing @@ -1,10 +1,10 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -scriptversion=2009-04-28.21; # UTC +scriptversion=2006-05-10.23 -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, -# 2008, 2009 Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006 +# Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify @@ -18,7 +18,9 @@ # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program. If not, see . +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -87,9 +89,6 @@ tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] -Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and -\`g' are ignored when checking the name. - Send bug reports to ." exit $? ;; @@ -107,22 +106,15 @@ esac -# normalize program name to check for. -program=`echo "$1" | sed ' - s/^gnu-//; t - s/^gnu//; t - s/^g//; t'` - # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect -# the program). This is about non-GNU programs, so use $1 not -# $program. +# the program). case $1 in - lex*|yacc*) + lex|yacc) # Not GNU programs, they don't have --version. ;; - tar*) + tar) if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 @@ -146,7 +138,7 @@ # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. -case $program in +case $1 in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if @@ -156,7 +148,7 @@ touch aclocal.m4 ;; - autoconf*) + autoconf) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the @@ -165,7 +157,7 @@ touch configure ;; - autoheader*) + autoheader) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want @@ -195,7 +187,7 @@ while read f; do touch "$f"; done ;; - autom4te*) + autom4te) echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the @@ -218,7 +210,7 @@ fi ;; - bison*|yacc*) + bison|yacc) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package @@ -248,7 +240,7 @@ fi ;; - lex*|flex*) + lex|flex) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package @@ -271,7 +263,7 @@ fi ;; - help2man*) + help2man) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the @@ -285,11 +277,11 @@ else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" - exit $? + exit 1 fi ;; - makeinfo*) + makeinfo) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file @@ -318,7 +310,7 @@ touch $file ;; - tar*) + tar) shift # We have already tried tar in the generic part. @@ -371,6 +363,5 @@ # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" +# time-stamp-end: "$" # End: --- x11proto-print-1.0.5.orig/install-sh +++ x11proto-print-1.0.5/install-sh @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2009-04-28.21; # UTC +scriptversion=2006-12-25.00 # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -515,6 +515,5 @@ # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" +# time-stamp-end: "$" # End: --- x11proto-print-1.0.5.orig/debian/rules +++ x11proto-print-1.0.5/debian/rules @@ -0,0 +1,92 @@ +#!/usr/bin/make -f +# debian/rules for the Debian x11proto-print-dev package. +# Copyright © 2004 Scott James Remnant +# Copyright © 2005 Daniel Stone +# Copyright © 2005 David Nusinow + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +PACKAGE = x11proto-print-dev + +include debian/xsfbs/xsfbs.mk + +CFLAGS = -Wall -g +ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) + CFLAGS += -O0 +else + CFLAGS += -O2 +endif +ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS))) + INSTALL_PROGRAM += -s +endif + +DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH) +DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) +DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) +ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE)) + confflags += --build=$(DEB_HOST_GNU_TYPE) +else + confflags += --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE) +endif + + +build: build-stamp +build-stamp: + dh_testdir + + test -d obj-$(DEB_BUILD_GNU_TYPE) || mkdir obj-$(DEB_BUILD_GNU_TYPE) + cd obj-$(DEB_BUILD_GNU_TYPE) && \ + ../configure --prefix=/usr --mandir=\$${prefix}/share/man \ + --infodir=\$${prefix}/share/info --disable-shared \ + $(confflags) CFLAGS="$(CFLAGS)" + cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE) + + touch build-stamp + +clean: + dh_testdir + dh_testroot + rm -f build-stamp + + rm -f config.cache config.log config.status + rm -f */config.cache */config.log */config.status + rm -f conftest* */conftest* + rm -rf autom4te.cache */autom4te.cache + rm -rf obj-* + + dh_clean + +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + + cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install + +# Build architecture-independent files here. +binary-indep: build install + dh_testdir + dh_testroot + + dh_installdocs + dh_installman + dh_install --sourcedir=debian/tmp --list-missing + dh_installchangelogs ChangeLog + dh_link + dh_strip + dh_compress + dh_fixperms + dh_installdeb + dh_shlibdeps + dh_gencontrol + dh_md5sums + dh_builddeb + +# Build architecture-dependent files here. +binary-arch: build install +# Nothing to do + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install --- x11proto-print-1.0.5.orig/debian/changelog +++ x11proto-print-1.0.5/debian/changelog @@ -0,0 +1,53 @@ +x11proto-print (1.0.5-2) unstable; urgency=low + + [ Julien Cristau ] + * Remove David and Andres from Uploaders. + * Drop obsolete Pre-Depends on x11-common. + + [ Steve Langasek ] + * Mark x11proto-print-dev Multi-Arch: foreign + + -- Steve Langasek Tue, 15 Nov 2011 11:44:18 -0800 + +x11proto-print (1.0.5-1) unstable; urgency=low + + [ Brice Goglin ] + * Update the long description. + * Update URL in debian/copyright. + * Add Vcs-* to debian/control. + * Remove Fabio from Uploaders, with his permission. + + [ Julien Cristau ] + * New upstream release. + * Install the upstream ChangeLog. + * Remove Branden from Uploaders, with his permission. + * Bump Standards-Version to 3.7.3 (no changes). + + [ Cyril Brulebois ] + * New upstream release (skipping 1.0.4). + * Update debian/copyright from upstream COPYING. + * Add myself to Uploaders. + + -- Cyril Brulebois Fri, 14 Jan 2011 03:48:44 +0100 + +x11proto-print (1.0.3.xsf1-1) unstable; urgency=low + + * Bring unstable into sync with XSF copy. + * Renumber version to account for move to XSF, with the upstream + tarball no longer managed by dbs as a tarball inside a tarball. + + -- Drew Parsons Thu, 31 Aug 2006 20:25:23 +1000 + +x11proto-print (1.0.3-2) experimental; urgency=low + + * Brought into the XSF repository. Uses same debian/rules as other + proto packages. + * Standards version 3.7.2. + + -- Drew Parsons Wed, 26 Jul 2006 18:13:16 +1000 + +x11proto-print (1.0.3-1) unstable; urgency=low + + * Initial release for modular X11R7. + + -- Drew Parsons Sun, 16 Apr 2006 15:43:16 +1000 --- x11proto-print-1.0.5.orig/debian/x11proto-print-dev.install +++ x11proto-print-1.0.5/debian/x11proto-print-dev.install @@ -0,0 +1,2 @@ +usr/include/X11/extensions/* +usr/lib/pkgconfig/printproto.pc --- x11proto-print-1.0.5.orig/debian/control +++ x11proto-print-1.0.5/debian/control @@ -0,0 +1,23 @@ +Source: x11proto-print +Section: x11 +Priority: optional +Maintainer: Debian X Strike Force +Uploaders: Drew Parsons , Cyril Brulebois +Build-Depends: debhelper (>= 5) +Standards-Version: 3.7.3 +Vcs-Git: git://git.debian.org/git/pkg-xorg/proto/x11proto-print +Vcs-Browser: http://git.debian.org/?p=pkg-xorg/proto/x11proto-print.git + +Package: x11proto-print-dev +Architecture: all +Multi-Arch: foreign +Depends: ${shlibs:Depends}, ${misc:Depends} +Conflicts: libxp-dev (<<1:1) +Description: X11 Printing extension (Xprint) wire protocol + This package provides development headers describing the wire protocol + for Xprint, the X11 printing extension. + . + More information about X.Org can be found at: + + . + This package is built from the X.org printproto proto module. --- x11proto-print-1.0.5.orig/debian/compat +++ x11proto-print-1.0.5/debian/compat @@ -0,0 +1 @@ +5 --- x11proto-print-1.0.5.orig/debian/copyright +++ x11proto-print-1.0.5/debian/copyright @@ -0,0 +1,35 @@ +This package was downloaded from +http://xorg.freedesktop.org/releases/individual/proto/ + +This package was debianized by Drew Parsons on +Sunday, April 16 2006 15:34:09. + +(c) Copyright 1996 Hewlett-Packard Company +(c) Copyright 1996 International Business Machines Corp. +(c) Copyright 1996, Oracle and/or its affiliates. All rights reserved. +(c) Copyright 1996 Novell, Inc. +(c) Copyright 1996 Digital Equipment Corp. +(c) Copyright 1996 Fujitsu Limited +(c) Copyright 1996 Hitachi, Ltd. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER +IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the copyright holders shall +not be used in advertising or otherwise to promote the sale, use or other +dealings in this Software without prior written authorization from said +copyright holders. --- x11proto-print-1.0.5.orig/debian/watch +++ x11proto-print-1.0.5/debian/watch @@ -0,0 +1,3 @@ +#git=git://anongit.freedesktop.org/xorg/proto/printproto +version=3 +http://xorg.freedesktop.org/releases/individual/proto/ printproto-(.*)\.tar\.gz --- x11proto-print-1.0.5.orig/debian/xsfbs/xsfbs-autoreconf.mk +++ x11proto-print-1.0.5/debian/xsfbs/xsfbs-autoreconf.mk @@ -0,0 +1,150 @@ +#!/usr/bin/make -f +# $Id$ + +# Automagical conversion of autoreconf results into quilt patches. + +# Copyright 2006 Eugene Konev +# +# Licensed under the GNU General Public License, version 2. See the file +# /usr/share/common-licenses/GPL or . + +# The idea behind this is storing changes produced by autoreconf as a +# separate patch on quilt stack (on top of stack actually). +# The only usable target here is 'autoreconf`. Other targets are not +# supposed to be called directly. DO NOT invoke them, unless you know what +# you are doing. +# The autoreconf target will check if files with names in $(RECONF_CHECKFILES) +# were changed during patching (from upstream version or from previously +# autoreconfed version) and call actual autoreconfing if they were. +# The actual autoreconfing target (doautoreconf) WILL FAIL after +# calling autoreconf and pushing changes into quilt stack by design. It +# should never be invoked by automatic build process. +# The proposed use is adding autoreconf into clean's prerequisites before +# xsfclean like: +# - clean: xsfclean +# + clean: autoreconf xsfclean +# This will ensure it is called when you build package with dpkg-buildpackage. + +# This dir will be used for producing diff of autoreconfed tree +RECONF_DIR := xsfautoreconf + +# This files will be checked for changes +RECONF_CHECKFILES += configure.ac Makefile.am + +# This files will not be hardlinked but copied +RECONF_NOLINKFILES += aclocal.m4 + +# This files/dirs will be pruned after autoreconf run +RECONF_PRUNEFILES += autom4te.cache config.h.in~ aclocal.m4~ + +# Internal target. Never invoke directly. +stampdir_target+=check.md5sum +$(STAMP_DIR)/check.md5sum: + dh_testdir + $(MAKE) -f debian/rules prepare + for F in $(RECONF_CHECKFILES); do \ + find . -wholename ./$(STAMP_DIR) -prune -o -name $$F -print | \ + LC_ALL=C sort | xargs --no-run-if-empty md5sum >>$@; \ + done + +# Internal target. Never invoke directly. +$(STAMP_DIR)/clean.md5sum: + dh_testdir + $(MAKE) -f debian/rules unpatch + rm -f $(STAMP_DIR)/check.md5sum + $(MAKE) -f debian/rules $(STAMP_DIR)/check.md5sum + mv $(STAMP_DIR)/check.md5sum $@ + +# Internal target. Never invoke directly. +debian/patches/patched.md5sum: + dh_testdir + [ -f $(STAMP_DIR)/clean.md5sum ] || \ + $(MAKE) -f debian/rules $(STAMP_DIR)/clean.md5sum + + $(MAKE) -f debian/rules patch + rm -f $(STAMP_DIR)/check.md5sum + $(MAKE) -f debian/rules $(STAMP_DIR)/check.md5sum + if ! diff $(STAMP_DIR)/clean.md5sum \ + $(STAMP_DIR)/check.md5sum > /dev/null; then \ + $(MAKE) -f debian/rules doautoreconf; \ + else \ + mv $(STAMP_DIR)/check.md5sum $@; \ + fi + +# Internal target. Never invoke directly. +,PHONY: doautoreconf +doautoreconf: patch + quilt push -a >>$(STAMP_DIR)/log/autoreconf 2>&1 || true + if quilt applied | grep ^autoreconf.diff$$ > /dev/null; then \ + quilt pop -a >>$(STAMP_DIR)/log/autoreconf 2>&1; \ + quilt rename -p autoreconf.diff autoreconf-old.diff \ + >>$(STAMP_DIR)/log/autoreconf 2>&1; \ + quilt delete autoreconf-old.diff >>$(STAMP_DIR)/log/autoreconf 2>&1; \ + quilt push -a >>$(STAMP_DIR)/log/autoreconf 2>&1; \ + fi + + if [ -e $(RECONF_DIR) ]; then \ + echo "ERROR: $(RECONF_DIR) already exists. Cleanup by hand"; \ + exit 1; \ + fi + + mkdir -p $(RECONF_DIR)/before + find . -maxdepth 1 -mindepth 1 ! -wholename ./$(RECONF_DIR) \ + -a ! -wholename ./debian -a ! -wholename ./patches \ + -a ! -wholename ./.pc -a ! -wholename ./$(STAMP_DIR) | \ + xargs -i{} cp -al {} $(RECONF_DIR)/before/ + + for F in $(RECONF_PRUNEFILES); do \ + find $(RECONF_DIR)/before -name $$F -print | \ + xargs --no-run-if-empty rm -r; \ + done + + cp -al $(RECONF_DIR)/before $(RECONF_DIR)/after + + for F in $(RECONF_NOLINKFILES); do \ + find . -wholename ./$(RECONF_DIR) -prune -o -wholename ./debian \ + -prune -o -wholename ./$(STAMP_DIR) -prune -o -name $$F \ + -print | \ + xargs --no-run-if-empty -i{} cp --remove-destination {} \ + $(RECONF_DIR)/after/{}; \ + done + + cd $(RECONF_DIR)/after && autoreconf -v --install && \ + for F in $(RECONF_PRUNEFILES); do \ + find . -name $$F -print | \ + xargs --no-run-if-empty rm -r; \ + done + + cd $(RECONF_DIR) && diff -Nru before after > autoreconf.diff || true + + quilt import $(RECONF_DIR)/autoreconf.diff \ + >>$(STAMP_DIR)/log/autoreconf 2>&1 + + mv $(STAMP_DIR)/check.md5sum debian/patches/patched.md5sum + + rm -r $(RECONF_DIR) && rm -f patches/autoreconf-old.diff + + @echo + @echo "****************************************************************" + @echo " This target is made to fail INTENTIONALLY. It should NEVER " + @echo " be invoked during automatic builds. " + @echo + @echo " This target was invoked because you added/removed/changed " + @echo " patches which modify either configure.ac or Makefile.am and, " + @echo " thus, require autoreconf run. And all autoreconfing should " + @echo " happen before uploading. " + @echo + @echo " (See also debian/xsfbs/xsfbs-autoreconf.mk) " + @echo + @echo " If you see this message, autoreconfing actually SUCCEEDED, " + @echo " and your build should finish successfully, when rerun. " + @echo "****************************************************************" + @echo + exit 1; + +.PHONY: autoreconf +autoreconf: debian/patches/patched.md5sum patch $(STAMP_DIR)/check.md5sum + if ! diff $(STAMP_DIR)/check.md5sum \ + debian/patches/patched.md5sum > /dev/null; then \ + $(MAKE) -f debian/rules doautoreconf; \ + fi --- x11proto-print-1.0.5.orig/debian/xsfbs/xsfbs.sh +++ x11proto-print-1.0.5/debian/xsfbs/xsfbs.sh @@ -0,0 +1,900 @@ +# $Id$ + +# This is the X Strike Force shell library for X Window System package +# maintainer scripts. It serves to define shell functions commonly used by +# such packages, and performs some error checking necessary for proper operation +# of those functions. By itself, it does not "do" much; the maintainer scripts +# invoke the functions defined here to accomplish package installation and +# removal tasks. + +# If you are reading this within a Debian package maintainer script (e.g., +# /var/lib/dpkg)info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can +# skip past this library by scanning forward in this file to the string +# "GOBSTOPPER". + +SOURCE_VERSION=@SOURCE_VERSION@ +OFFICIAL_BUILD=@OFFICIAL_BUILD@ + +# Use special abnormal exit codes so that problems with this library are more +# easily tracked down. +SHELL_LIB_INTERNAL_ERROR=86 +SHELL_LIB_THROWN_ERROR=74 +SHELL_LIB_USAGE_ERROR=99 + +# old -> new variable names +if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then + DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE" +fi +if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then + DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF" +fi + +# initial sanity checks +if [ -z "$THIS_PACKAGE" ]; then + cat >&2 < on the World Wide Web for +instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the +"doc-debian" package, or install the "reportbug" package and use the command of +the same name to file a report against version $SOURCE_VERSION of this package. +EOF + exit $SHELL_LIB_USAGE_ERROR +fi + +if [ -z "$THIS_SCRIPT" ]; then + cat >&2 < on the World Wide Web for +instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the +"doc-debian" package, or install the "reportbug" package and use the command of +the same name to file a report against version $SOURCE_VERSION of the +"$THIS_PACKAGE" package. +EOF + exit $SHELL_LIB_USAGE_ERROR +fi + +ARCHITECTURE="$(dpkg --print-installation-architecture)" + +if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then + RECONFIGURE="true" +else + RECONFIGURE= +fi + +if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then + FIRSTINST="yes" +fi + +if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then + UPGRADE="yes" +fi + +trap "message;\ + message \"Received signal. Aborting $THIS_PACKAGE package $THIS_SCRIPT script.\";\ + message;\ + exit 1" HUP INT QUIT TERM + +reject_nondigits () { + # syntax: reject_nondigits [ operand ... ] + # + # scan operands (typically shell variables whose values cannot be trusted) for + # characters other than decimal digits and barf if any are found + while [ -n "$1" ]; do + # does the operand contain anything but digits? + if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then + # can't use die(), because it wraps message() which wraps this function + echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \ + "possibly malicious garbage \"$1\"" >&2 + exit $SHELL_LIB_THROWN_ERROR + fi + shift + done +} + +reject_whitespace () { + # syntax: reject_whitespace [ operand ] + # + # scan operand (typically a shell variable whose value cannot be trusted) for + # whitespace characters and barf if any are found + if [ -n "$1" ]; then + # does the operand contain any whitespace? + if expr "$1" : "[[:space:]]" > /dev/null 2>&1; then + # can't use die(), because I want to avoid forward references + echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_whitespace() encountered" \ + "possibly malicious garbage \"$1\"" >&2 + exit $SHELL_LIB_THROWN_ERROR + fi + fi +} + +reject_unlikely_path_chars () { + # syntax: reject_unlikely_path_chars [ operand ... ] + # + # scan operands (typically shell variables whose values cannot be trusted) for + # characters unlikely to be seen in a path and which the shell might + # interpret and barf if any are found + while [ -n "$1" ]; do + # does the operand contain any funny characters? + if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then + # can't use die(), because I want to avoid forward references + echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \ + "encountered possibly malicious garbage \"$1\"" >&2 + exit $SHELL_LIB_THROWN_ERROR + fi + shift + done +} + +# Query the terminal to establish a default number of columns to use for +# displaying messages to the user. This is used only as a fallback in the +# event the COLUMNS variable is not set. ($COLUMNS can react to SIGWINCH while +# the script is running, and this cannot, only being calculated once.) +DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true +if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then + DEFCOLUMNS=80 +fi + +message () { + # pretty-print messages of arbitrary length + reject_nondigits "$COLUMNS" + echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2 +} + +observe () { + # syntax: observe message ... + # + # issue observational message suitable for logging someday when support for + # it exists in dpkg + if [ -n "$DEBUG_XORG_PACKAGE" ]; then + message "$THIS_PACKAGE $THIS_SCRIPT note: $*" + fi +} + +warn () { + # syntax: warn message ... + # + # issue warning message suitable for logging someday when support for + # it exists in dpkg; also send to standard error + message "$THIS_PACKAGE $THIS_SCRIPT warning: $*" +} + +die () { + # syntax: die message ... + # + # exit script with error message + message "$THIS_PACKAGE $THIS_SCRIPT error: $*" + exit $SHELL_LIB_THROWN_ERROR +} + +internal_error () { + # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message + message "internal error: $*" + if [ -n "$OFFICIAL_BUILD" ]; then + message "Please report a bug in the $THIS_SCRIPT script of the" \ + "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \ + "Tracking System. Include all messages above that mention the" \ + "$THIS_PACKAGE package. Visit " \ + " on the World Wide Web for" \ + "instructions, read the file" \ + "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \ + "package, or install the reportbug package and use the command of" \ + "the same name to file a report." + fi + exit $SHELL_LIB_INTERNAL_ERROR +} + +usage_error () { + message "usage error: $*" + message "Please report a bug in the $THIS_SCRIPT script of the" \ + "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \ + "Tracking System. Include all messages above that mention the" \ + "$THIS_PACKAGE package. Visit " \ + " on the World Wide Web for" \ + "instructions, read the file" \ + "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \ + "package, or install the reportbug package and use the command of" \ + "the same name to file a report." + exit $SHELL_LIB_USAGE_ERROR +} + + +maplink () { + # returns what symlink should point to; i.e., what the "sane" answer is + # Keep this in sync with the debian/*.links files. + # This is only needed for symlinks to directories. + # + # XXX: Most of these look wrong in the X11R7 world and need to be fixed. + # If we've stopped using this function, fixing it might enable us to re-enable + # it again and catch more errors. + case "$1" in + /etc/X11/xkb/compiled) echo /var/lib/xkb ;; + /etc/X11/xkb/xkbcomp) echo /usr/X11R6/bin/xkbcomp ;; + /usr/X11R6/lib/X11/app-defaults) echo /etc/X11/app-defaults ;; + /usr/X11R6/lib/X11/fs) echo /etc/X11/fs ;; + /usr/X11R6/lib/X11/lbxproxy) echo /etc/X11/lbxproxy ;; + /usr/X11R6/lib/X11/proxymngr) echo /etc/X11/proxymngr ;; + /usr/X11R6/lib/X11/rstart) echo /etc/X11/rstart ;; + /usr/X11R6/lib/X11/twm) echo /etc/X11/twm ;; + /usr/X11R6/lib/X11/xdm) echo /etc/X11/xdm ;; + /usr/X11R6/lib/X11/xinit) echo /etc/X11/xinit ;; + /usr/X11R6/lib/X11/xkb) echo /etc/X11/xkb ;; + /usr/X11R6/lib/X11/xserver) echo /etc/X11/xserver ;; + /usr/X11R6/lib/X11/xsm) echo /etc/X11/xsm ;; + /usr/bin/X11) echo ../X11R6/bin ;; + /usr/bin/rstartd) echo ../X11R6/bin/rstartd ;; + /usr/include/X11) echo ../X11R6/include/X11 ;; + /usr/lib/X11) echo ../X11R6/lib/X11 ;; + *) internal_error "maplink() called with unknown path \"$1\"" ;; + esac +} + +analyze_path () { + # given a supplied set of pathnames, break each one up by directory and do an + # ls -dl on each component, cumulatively; i.e. + # analyze_path /usr/X11R6/bin -> ls -dl /usr /usr/X11R6 /usr/X11R6/bin + # Thanks to Randolph Chung for this clever hack. + + #local f g + + while [ -n "$1" ]; do + reject_whitespace "$1" + _g= + message "Analyzing $1:" + for _f in $(echo "$1" | tr / \ ); do + if [ -e /$_g$_f ]; then + ls -dl /$_g$_f /$_g$_f.dpkg-* 2> /dev/null || true + _g=$_g$_f/ + else + message "/$_g$_f: nonexistent; directory contents of /$_g:" + ls -l /$_g + break + fi + done + shift + done +} + +find_culprits () { + #local f p dpkg_info_dir possible_culprits smoking_guns bad_packages package \ + # msg + + reject_whitespace "$1" + message "Searching for overlapping packages..." + _dpkg_info_dir=/var/lib/dpkg/info + if [ -d $_dpkg_info_dir ]; then + if [ "$(echo $_dpkg_info_dir/*.list)" != "$_dpkg_info_dir/*.list" ]; then + _possible_culprits=$(ls -1 $_dpkg_info_dir/*.list | egrep -v \ + "(xbase-clients|x11-common|xfs|xlibs)") + if [ -n "$_possible_culprits" ]; then + _smoking_guns=$(grep -l "$1" $_possible_culprits || true) + if [ -n "$_smoking_guns" ]; then + _bad_packages=$(printf "\\n") + for f in $_smoking_guns; do + # too bad you can't nest parameter expansion voodoo + p=${f%*.list} # strip off the trailing ".list" + _package=${p##*/} # strip off the directories + _bad_packages=$(printf "%s\n%s" "$_bad_packages" "$_package") + done + _msg=$(cat < /dev/null 2>&1; then + message "The readlink command was not found. Please install version" \ + "1.13.1 or later of the debianutils package." + readlink () { + # returns what symlink in $1 actually points to + perl -e '$l = shift; exit 1 unless -l $l; $r = readlink $l; exit 1 unless $r; print "$r\n"' "$1" + } +fi + +check_symlink () { + # syntax: check_symlink symlink + # + # See if specified symlink points where it is supposed to. Return 0 if it + # does, and 1 if it does not. + # + # Primarily used by check_symlinks_and_warn() and check_symlinks_and_bomb(). + + #local symlink + + # validate arguments + if [ $# -ne 1 ]; then + usage_error "check_symlink() called with wrong number of arguments;" \ + "expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + _symlink="$1" + + if [ "$(maplink "$_symlink")" = "$(readlink "$_symlink")" ]; then + return 0 + else + return 1 + fi +} + +check_symlinks_and_warn () { + # syntax: check_symlinks_and_warn symlink ... + # + # For each argument, check for symlink sanity, and warn if it isn't sane. + # + # Call this function from a preinst script in the event $1 is "upgrade" or + # "install". + + #local errmsg symlink + + # validate arguments + if [ $# -lt 1 ]; then + usage_error "check_symlinks_and_warn() called with wrong number of" \ + "arguments; expected at least 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + while [ -n "$1" ]; do + _symlink="$1" + if [ -L "$_symlink" ]; then + if ! check_symlink "$_symlink"; then + observe "$_symlink symbolic link points to wrong location" \ + "$(readlink "$_symlink"); removing" + rm "$_symlink" + fi + elif [ -e "$_symlink" ]; then + _errmsg="$_symlink exists and is not a symbolic link; this package cannot" + _errmsg="$_errmsg be installed until this" + if [ -f "$_symlink" ]; then + _errmsg="$_errmsg file" + elif [ -d "$_symlink" ]; then + _errmsg="$_errmsg directory" + else + _errmsg="$_errmsg thing" + fi + _errmsg="$_errmsg is removed" + die "$_errmsg" + fi + shift + done +} + +check_symlinks_and_bomb () { + # syntax: check_symlinks_and_bomb symlink ... + # + # For each argument, check for symlink sanity, and bomb if it isn't sane. + # + # Call this function from a postinst script. + + #local problem symlink + + # validate arguments + if [ $# -lt 1 ]; then + usage_error "check_symlinks_and_bomb() called with wrong number of" + "arguments; expected at least 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + while [ -n "$1" ]; do + _problem= + _symlink="$1" + if [ -L "$_symlink" ]; then + if ! check_symlink "$_symlink"; then + _problem=yes + warn "$_symlink symbolic link points to wrong location" \ + "$(readlink "$_symlink")" + fi + elif [ -e "$_symlink" ]; then + _problem=yes + warn "$_symlink is not a symbolic link" + else + _problem=yes + warn "$_symlink symbolic link does not exist" + fi + if [ -n "$_problem" ]; then + analyze_path "$_symlink" "$(readlink "$_symlink")" + find_culprits "$_symlink" + die "bad symbolic links on system" + fi + shift + done +} + +font_update () { + # run $UPDATECMDS in $FONTDIRS + + #local dir cmd shortcmd x_font_dir_prefix + + _x_font_dir_prefix="/usr/share/fonts/X11" + + if [ -z "$UPDATECMDS" ]; then + usage_error "font_update() called but \$UPDATECMDS not set" + fi + if [ -z "$FONTDIRS" ]; then + usage_error "font_update() called but \$FONTDIRS not set" + fi + + reject_unlikely_path_chars "$UPDATECMDS" + reject_unlikely_path_chars "$FONTDIRS" + + for _dir in $FONTDIRS; do + if [ -d "$_x_font_dir_prefix/$_dir" ]; then + for _cmd in $UPDATECMDS; do + if which "$_cmd" > /dev/null 2>&1; then + _shortcmd=${_cmd##*/} + observe "running $_shortcmd in $_dir font directory" + _cmd_opts= + if [ "$_shortcmd" = "update-fonts-alias" ]; then + _cmd_opts=--x11r7-layout + fi + if [ "$_shortcmd" = "update-fonts-dir" ]; then + _cmd_opts=--x11r7-layout + fi + if [ "$_shortcmd" = "update-fonts-scale" ]; then + _cmd_opts=--x11r7-layout + fi + $_cmd $_cmd_opts $_dir || warn "$_cmd $_cmd_opts $_dir" \ + "failed; font directory data may not" \ + "be up to date" + else + warn "$_cmd not found; not updating corresponding $_dir font" \ + "directory data" + fi + done + else + warn "$_dir is not a directory; not updating font directory data" + fi + done +} + +remove_conffile_prepare () { + # syntax: remove_conffile_prepare filename official_md5sum ... + # + # Check a conffile "filename" against a list of canonical MD5 checksums. + # If the file's current MD5 checksum matches one of the "official_md5sum" + # operands provided, then prepare the conffile for removal from the system. + # We defer actual deletion until the package is configured so that we can + # roll this operation back if package installation fails. + # + # Call this function from a preinst script in the event $1 is "upgrade" or + # "install" and verify $2 to ensure the package is being upgraded from a + # version (or installed over a version removed-but-not-purged) prior to the + # one in which the conffile was obsoleted. + + #local conffile current_checksum + + # validate arguments + if [ $# -lt 2 ]; then + usage_error "remove_conffile_prepare() called with wrong number of" \ + "arguments; expected at least 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + _conffile="$1" + shift + + # does the _conffile even exist? + if [ -e "$_conffile" ]; then + # calculate its checksum + _current_checksum=$(md5sum < "$_conffile" | sed 's/[[:space:]].*//') + # compare it to each supplied checksum + while [ -n "$1" ]; do + if [ "$_current_checksum" = "$1" ]; then + # we found a match; move the confffile and stop looking + observe "preparing obsolete conffile $_conffile for removal" + mv "$_conffile" "$_conffile.$THIS_PACKAGE-tmp" + break + fi + shift + done + fi +} + +remove_conffile_commit () { + # syntax: remove_conffile_commit filename + # + # Complete the removal of a conffile "filename" that has become obsolete. + # + # Call this function from a postinst script after having used + # remove_conffile_prepare() in the preinst. + + #local conffile + + # validate arguments + if [ $# -ne 1 ]; then + usage_error "remove_conffile_commit() called with wrong number of" \ + "arguments; expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + _conffile="$1" + + # if the temporary file created by remove_conffile_prepare() exists, remove it + if [ -e "$_conffile.$THIS_PACKAGE-tmp" ]; then + observe "committing removal of obsolete conffile $_conffile" + rm "$_conffile.$THIS_PACKAGE-tmp" + fi +} + +remove_conffile_rollback () { + # syntax: remove_conffile_rollback filename + # + # Roll back the removal of a conffile "filename". + # + # Call this function from a postrm script in the event $1 is "abort-upgrade" + # or "abort-install" is after having used remove_conffile_prepare() in the + # preinst. + + #local conffile + + # validate arguments + if [ $# -ne 1 ]; then + usage_error "remove_conffile_rollback() called with wrong number of" \ + "arguments; expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + _conffile="$1" + + # if the temporary file created by remove_conffile_prepare() exists, move it + # back + if [ -e "$_conffile.$THIS_PACKAGE-tmp" ]; then + observe "rolling back removal of obsolete conffile $_conffile" + mv "$_conffile.$THIS_PACKAGE-tmp" "$_conffile" + fi +} + +replace_conffile_with_symlink_prepare () { + # syntax: replace_conffile_with_symlink_prepare oldfilename newfilename \ + # official_md5sum ... + # + # Check a conffile "oldfilename" against a list of canonical MD5 checksums. + # If the file's current MD5 checksum matches one of the "official_md5sum" + # operands provided, then prepare the conffile for removal from the system. + # We defer actual deletion until the package is configured so that we can + # roll this operation back if package installation fails. Otherwise copy it + # to newfilename and let dpkg handle it through conffiles mechanism. + # + # Call this function from a preinst script in the event $1 is "upgrade" or + # "install" and verify $2 to ensure the package is being upgraded from a + # version (or installed over a version removed-but-not-purged) prior to the + # one in which the conffile was obsoleted. + + #local conffile current_checksum + + # validate arguments + if [ $# -lt 3 ]; then + usage_error "replace_conffile_with_symlink_prepare() called with wrong" \ + " number of arguments; expected at least 3, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + _oldconffile="$1" + shift + _newconffile="$1" + shift + + remove_conffile_prepare "$_oldconffile" "$@" + # If $_oldconffile still exists, then md5sums didn't match. + # Copy it to new one. + if [ -f "$_oldconffile" ]; then + cp "$_oldconffile" "$_newconffile" + fi + +} + +replace_conffile_with_symlink_commit () { + # syntax: replace_conffile_with_symlink_commit oldfilename + # + # Complete the removal of a conffile "oldfilename" that has been + # replaced by a symlink. + # + # Call this function from a postinst script after having used + # replace_conffile_with_symlink_prepare() in the preinst. + + #local conffile + + # validate arguments + if [ $# -ne 1 ]; then + usage_error "replace_conffile_with_symlink_commit() called with wrong" \ + "number of arguments; expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + _conffile="$1" + + remove_conffile_commit "$_conffile" +} + +replace_conffile_with_symlink_rollback () { + # syntax: replace_conffile_with_symlink_rollback oldfilename newfilename + # + # Roll back the replacing of a conffile "oldfilename" with symlink to + # "newfilename". + # + # Call this function from a postrm script in the event $1 is "abort-upgrade" + # or "abort-install" and verify $2 to ensure the package failed to upgrade + # from a version (or install over a version removed-but-not-purged) prior + # to the one in which the conffile was obsoleted. + # You should have used replace_conffile_with_symlink_prepare() in the + # preinst. + + #local conffile + + # validate arguments + if [ $# -ne 2 ]; then + usage_error "replace_conffile_with_symlink_rollback() called with wrong" \ + "number of arguments; expected 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + _oldconffile="$1" + _newconffile="$2" + + remove_conffile_rollback "$_oldconffile" + if [ -f "$_newconffile" ]; then + rm "$_newconffile" + fi +} + +run () { + # syntax: run command [ argument ... ] + # + # Run specified command with optional arguments and report its exit status. + # Useful for commands whose exit status may be nonzero, but still acceptable, + # or commands whose failure is not fatal to us. + # + # NOTE: Do *not* use this function with db_get or db_metaget commands; in + # those cases the return value of the debconf command *must* be checked + # before the string returned by debconf is used for anything. + + #local retval + + # validate arguments + if [ $# -lt 1 ]; then + usage_error "run() called with wrong number of arguments; expected at" \ + "least 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + "$@" || _retval=$? + + if [ ${_retval:-0} -ne 0 ]; then + observe "command \"$*\" exited with status $_retval" + fi +} + +register_x_lib_dir_with_ld_so () { + # syntax: register_x_lib_dir_with_ld_so + # + # Configure the dynamic loader ld.so to search /usr/X11R6/lib for shared + # libraries. + # + # Call this function from the postinst script of a package that places a + # shared library in /usr/X11R6/lib, before invoking ldconfig. + + #local dir ldsoconf + + _dir="/usr/X11R6/lib" + _ldsoconf="/etc/ld.so.conf" + + # is the line not already present? + if ! fgrep -qsx "$_dir" "$_ldsoconf"; then + observe "adding $_dir directory to $_ldsoconf" + echo "$_dir" >> "$_ldsoconf" + fi +} + +deregister_x_lib_dir_with_ld_so () { + # syntax: deregister_x_lib_dir_with_ld_so + # + # Configure dynamic loader ld.so to not search /usr/X11R6/lib for shared + # libraries, if and only if no shared libaries remain there. + # + # Call this function from the postrm script of a package that places a shared + # library in /usr/X11R6/lib, in the event "$1" is "remove", and before + # invoking ldconfig. + + #local dir ldsoconf fgrep_status cmp_status + + _dir="/usr/X11R6/lib" + _ldsoconf="/etc/ld.so.conf" + + # is the line present? + if fgrep -qsx "$_dir" "$_ldsoconf"; then + # are there any shared objects in the directory? + if [ "$(echo "$_dir"/lib*.so.*.*)" = "$_dir/lib*.so.*.*" ]; then + # glob expansion produced nothing, so no shared libraries are present + observe "removing $_dir directory from $_ldsoconf" + # rewrite the file (very carefully) + set +e + fgrep -svx "$_dir" "$_ldsoconf" > "$_ldsoconf.dpkg-tmp" + _fgrep_status=$? + set -e + case $_fgrep_status in + 0|1) ;; # we don't actually care if any lines matched or not + *) die "error reading \"$_ldsoconf\"; fgrep exited with status" \ + "$_fgrep_status" ;; + esac + set +e + cmp -s "$_ldsoconf.dpkg-tmp" "$_ldsoconf" + _cmp_status=$? + set -e + case $_cmp_status in + 0) rm "$_ldsoconf.dpkg-tmp" ;; # files are identical + 1) mv "$_ldsoconf.dpkg-tmp" "$_ldsoconf" ;; # files differ + *) die "error comparing \"$_ldsoconf.dpkg-tmp\" to \"$_ldsoconf\";" \ + "cmp exited with status $_cmp_status" ;; + esac + fi + fi +} + +make_symlink_sane () { + # syntax: make_symlink_sane symlink target + # + # Ensure that the symbolic link symlink exists, and points to target. + # + # If symlink does not exist, create it and point it at target. + # + # If symlink exists but is not a symbolic link, back it up. + # + # If symlink exists, is a symbolic link, but points to the wrong location, fix + # it. + # + # If symlink exists, is a symbolic link, and already points to target, do + # nothing. + # + # This function wouldn't be needed if ln had an -I, --idempotent option. + + # Validate arguments. + if [ $# -ne 2 ]; then + usage_error "make_symlink_sane() called with wrong number of arguments;" \ + "expected 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + # We could just use the positional parameters as-is, but that makes things + # harder to follow. + #local symlink target + + _symlink="$1" + _target="$2" + + if [ -L "$_symlink" ] && [ "$(readlink "$_symlink")" = "$_target" ]; then + observe "link from $_symlink to $_target already exists" + else + observe "creating symbolic link from $_symlink to $_target" + mkdir -p "${_target%/*}" "${_symlink%/*}" + ln -s -b -S ".dpkg-old" "$_target" "$_symlink" + fi +} + +migrate_dir_to_symlink () { + # syntax: migrate_dir_to_symlink old_location new_location + # + # Per Debian Policy section 6.5.4, "A directory will never be replaced by a + # symbolic link to a directory or vice versa; instead, the existing state + # (symlink or not) will be left alone and dpkg will follow the symlink if + # there is one." + # + # We have to do it ourselves. + # + # This function moves the contents of old_location, a directory, into + # new_location, a directory, then makes old_location a symbolic link to + # new_location. + # + # old_location need not exist, but if it does, it must be a directory (or a + # symlink to a directory). If it is not, it is backed up. If new_location + # exists already and is not a directory, it is backed up. + # + # This function should be called from a package's preinst so that other + # packages unpacked after this one --- but before this package's postinst runs + # --- are unpacked into new_location even if their payloads contain + # old_location filespecs. + + # Validate arguments. + if [ $# -ne 2 ]; then + usage_error "migrate_dir_to_symlink() called with wrong number of" + "arguments; expected 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + # We could just use the positional parameters as-is, but that makes things + # harder to follow. + local _new _old + + _old="$1" + _new="$2" + + # Is old location a symlink? + if [ -L "$_old" ]; then + # Does it already point to new location? + if [ "$(readlink "$_old")" = "$_new" ]; then + # Nothing to do; migration has already been done. + observe "migration of $_old to $_new already done" + return 0 + else + # Back it up. + warn "backing up symbolic link $_old as $_old.dpkg-old" + mv -b "$_old" "$_old.dpkg-old" + fi + fi + + # Does old location exist, but is not a directory? + if [ -e "$_old" ] && ! [ -d "$_old" ]; then + # Back it up. + warn "backing up non-directory $_old as $_old.dpkg-old" + mv -b "$_old" "$_old.dpkg-old" + fi + + observe "migrating $_old to $_new" + + # Is new location a symlink? + if [ -L "$_new" ]; then + # Does it point the wrong way, i.e., back to where we're migrating from? + if [ "$(readlink "$_new")" = "$_old" ]; then + # Get rid of it. + observe "removing symbolic link $_new which points to $_old" + rm "$_new" + else + # Back it up. + warn "backing up symbolic link $_new as $_new.dpkg-old" + mv -b "$_new" "$_new.dpkg-old" + fi + fi + + # Does new location exist, but is not a directory? + if [ -e "$_new" ] && ! [ -d "$_new" ]; then + warn "backing up non-directory $_new as $_new.dpkg-old" + mv -b "$_new" "$_new.dpkg-old" + fi + + # Create new directory if it does not yet exist. + if ! [ -e "$_new" ]; then + observe "creating $_new" + mkdir -p "$_new" + fi + + # Copy files in old location to new location. Back up any filenames that + # already exist in the new location with the extension ".dpkg-old". + observe "copying files from $_old to $_new" + if ! (cd "$_old" && cp -a -b -S ".dpkg-old" . "$_new"); then + die "error(s) encountered while copying files from $_old to $_new" + fi + + # Remove files at old location. + observe "removing $_old" + rm -r "$_old" + + # Create symlink from old location to new location. + make_symlink_sane "$_old" "$_new" +} + +# vim:set ai et sw=2 ts=2 tw=80: + +# GOBSTOPPER: The X Strike Force shell library ends here. --- x11proto-print-1.0.5.orig/debian/xsfbs/xsfbs.mk +++ x11proto-print-1.0.5/debian/xsfbs/xsfbs.mk @@ -0,0 +1,312 @@ +#!/usr/bin/make -f + +# Debian X Strike Force Build System (XSFBS): Make portion + +# Copyright 1996 Stephen Early +# Copyright 1997 Mark Eichin +# Copyright 1998-2005, 2007 Branden Robinson +# Copyright 2005 David Nusinow +# +# Licensed under the GNU General Public License, version 2. See the file +# /usr/share/common-licenses/GPL or . + +# Originally by Stephen Early +# Modified by Mark W. Eichin +# Modified by Adam Heath +# Modified by Branden Robinson +# Modified by Fabio Massimo Di Nitto +# Modified by David Nusinow +# Acknowledgements to Manoj Srivastava. + +# Pass $(DH_OPTIONS) into the environment for debhelper's benefit. +export DH_OPTIONS + +# force quilt to not use ~/.quiltrc +QUILT = quilt --quiltrc /dev/null +# force QUILT_PATCHES to the default in case it is exported in the environment +QUILT_PATCHES = patches/ + +# Set up parameters for the upstream build environment. + +# Determine (source) package name from Debian changelog. +SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \ + | grep '^Source:' | awk '{print $$2}') + +# Determine package version from Debian changelog. +SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \ + | grep '^Version:' | awk '{print $$2}') + +# Determine upstream version number. +UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//') + +# Determine the source version without the epoch for make-orig-tar-gz +NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://') + +# Figure out who's building this package. +BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat /etc/mailname 2>/dev/null))}}) + +# Find out if this is an official build; an official build has nothing but +# digits, dots, and/or the strings "woody" or "sarge" in the Debian part of the +# version number. Anything else indicates an unofficial build. +OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo $${VERSION\#\#*-} | sed 's/\(woody\|sarge\)//g')" : ".*[^0-9.].*" >/dev/null 2>&1; then echo yes; fi) + +# Set up parameters for the Debian build environment. + +# Determine our architecture. +BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH) +# Work around some old-time dpkg braindamage. +BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH)) +# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation policy. +ifdef DEB_HOST_ARCH + ARCH:=$(DEB_HOST_ARCH) +else + # dpkg-cross sets the ARCH environment variable; if set, use it. + ifdef ARCH + ARCH:=$(ARCH) + else + ARCH:=$(BUILD_ARCH) + endif +endif + +# $(STAMP_DIR) houses stamp files for complex targets. +STAMP_DIR:=stampdir + +# $(SOURCE_DIR) houses one or more source trees. +SOURCE_DIR:=build-tree + +# $(SOURCE_TREE) is the location of the source tree to be compiled. If there +# is more than one, others are found using this name plus a suffix to indicate +# the purpose of the additional tree (e.g., $(SOURCE_TREE)-custom). The +# "setup" target is responsible for creating such trees. +#SOURCE_TREE:=$(SOURCE_DIR)/xc +#FIXME We need to define this in our debian/rules file + +# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place +# their files. +DEBTREEDIR:=$(CURDIR)/debian/tmp + +# All "important" targets have four lines: +# 1) A target name that is invoked by a package-building tool or the user. +# This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart. +# 2) A line delcaring 1) as a phony target (".PHONY:"). +# 3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may +# depend on other targets. +# 4) A line declaring 3) as a member of the $(stampdir_targets) variable; the +# "$(STAMP_DIR)/" prefix is omitted. +# +# This indirection is needed so that the "stamp" files that signify when a rule +# is done can be located in a separate "stampdir". Recall that make has no way +# to know when a goal has been met for a phony target (like "build" or +# "install"). +# +# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@" +# so that the target will not be run again. Removing the file will make Make +# run the target over. + +# All phony targets should be declared as dependencies of .PHONY, even if they +# do not have "($STAMP_DIR)/"-prefixed counterparts. + +# Define a harmless default rule to keep things from going nuts by accident. +.PHONY: default +default: + +# Set up the $(STAMP_DIR) directory. +.PHONY: stampdir +stampdir_targets+=stampdir +stampdir: $(STAMP_DIR)/stampdir +$(STAMP_DIR)/stampdir: + mkdir $(STAMP_DIR) + >$@ + +# Set up the package build directory as quilt expects to find it. +.PHONY: prepare +stampdir_targets+=prepare +prepare: $(STAMP_DIR)/genscripts $(STAMP_DIR)/prepare $(STAMP_DIR)/patches $(STAMP_DIR)/log +$(STAMP_DIR)/prepare: $(STAMP_DIR)/stampdir + if [ ! -e $(STAMP_DIR)/patches ]; then \ + mkdir $(STAMP_DIR)/patches; \ + ln -s $(STAMP_DIR)/patches .pc; \ + echo 2 >$(STAMP_DIR)/patches/.version; \ + fi; \ + if [ ! -e $(STAMP_DIR)/log ]; then \ + mkdir $(STAMP_DIR)/log; \ + fi; \ + if [ -e debian/patches ] && [ ! -e patches ]; then \ + ln -s debian/patches patches; \ + fi; \ + >$@ + +# Apply all patches to the upstream source. +.PHONY: patch +stampdir_targets+=patch +patch: $(STAMP_DIR)/patch +$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare + if ! [ `which quilt` ]; then \ + echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \ + exit 1; \ + fi; \ + if $(QUILT) next >/dev/null 2>&1; then \ + echo -n "Applying patches..."; \ + if $(QUILT) push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \ + cat $(STAMP_DIR)/log/patch; \ + echo "successful."; \ + else \ + cat $(STAMP_DIR)/log/patch; \ + echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \ + exit 1; \ + fi; \ + else \ + echo "No patches to apply"; \ + fi; \ + >$@ + +# Revert all patches to the upstream source. +.PHONY: unpatch +unpatch: + rm -f $(STAMP_DIR)/patch + @echo -n "Unapplying patches..."; \ + if [ -e $(STAMP_DIR)/patches/applied-patches ]; then \ + if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \ + cat $(STAMP_DIR)/log/unpatch; \ + echo "successful."; \ + else \ + cat $(STAMP_DIR)/log/unpatch; \ + echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \ + exit 1; \ + fi; \ + else \ + echo "nothing to do."; \ + fi + +# Clean the generated maintainer scripts. +.PHONY: cleanscripts +cleanscripts: + rm -f $(STAMP_DIR)/genscripts + rm -f debian/*.config \ + debian/*.postinst \ + debian/*.postrm \ + debian/*.preinst \ + debian/*.prerm + +# Clean the package build tree. +.PHONY: xsfclean +xsfclean: cleanscripts unpatch + dh_testdir + rm -f .pc patches + rm -rf $(STAMP_DIR) $(SOURCE_DIR) + rm -rf imports + dh_clean debian/shlibs.local \ + debian/po/pothead + +# Generate the debconf templates POT file header. +debian/po/pothead: debian/po/pothead.in + sed -e 's/SOURCE_VERSION/$(SOURCE_VERSION)/' \ + -e 's/DATE/$(shell date "+%F %X%z"/)' <$< >$@ + +# Update POT and PO files. +.PHONY: updatepo +updatepo: debian/po/pothead + debian/scripts/debconf-updatepo --pot-header=pothead --verbose + +# Remove files from the upstream source tree that we don't need, or which have +# licensing problems. It must be run before creating the .orig.tar.gz. +# +# Note: This rule is for Debian package maintainers' convenience, and is not +# needed for conventional build scenarios. +.PHONY: prune-upstream-tree +prune-upstream-tree: + # Ensure we're in the correct directory. + dh_testdir + grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf + +# Verify that there are no offsets or fuzz in the patches we apply. +# +# Note: This rule is for Debian package maintainers' convenience, and is not +# needed for conventional build scenarios. +.PHONY: patch-audit +patch-audit: prepare unpatch + @echo -n "Auditing patches..."; \ + >$(STAMP_DIR)/log/patch; \ + FUZZY=; \ + while [ -n "$$($(QUILT) next)" ]; do \ + RESULT=$$($(QUILT) push -v | tee -a $(STAMP_DIR)/log/patch | grep ^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\ + case "$$RESULT" in \ + succeeded) \ + echo "fuzzy patch: $$($(QUILT) top)" \ + | tee -a $(STAMP_DIR)/log/$$($(QUILT) top); \ + FUZZY=yes; \ + ;; \ + FAILED) \ + echo "broken patch: $$($(QUILT) next)" \ + | tee -a $(STAMP_DIR)/log/$$($(QUILT) next); \ + exit 1; \ + ;; \ + esac; \ + done; \ + if [ -n "$$FUZZY" ]; then \ + echo "there were fuzzy patches; please fix."; \ + exit 1; \ + else \ + echo "done."; \ + fi + +# Generate the maintainer scripts. +.PHONY: genscripts +stampdir_targets+=genscripts +genscripts: $(STAMP_DIR)/genscripts +$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir + for FILE in debian/*.config.in \ + debian/*.postinst.in \ + debian/*.postrm.in \ + debian/*.preinst.in \ + debian/*.prerm.in; do \ + if [ -e "$$FILE" ]; then \ + MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \ + sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \ + | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \ + cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \ + sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \ + | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \ + sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \ + -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \ + -e 's/@DEFAULT_DCRESOLUTIONS@/$(DEFAULT_DCRESOLUTIONS)/' \ + <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \ + rm $$MAINTSCRIPT.tmp; \ + fi; \ + done + # Validate syntax of generated shell scripts. + #sh debian/scripts/validate-posix-sh debian/*.config \ + # debian/*.postinst \ + # debian/*.postrm \ + # debian/*.preinst \ + # debian/*.prerm + >$@ + +# Generate the shlibs.local file. +debian/shlibs.local: + cat debian/*.shlibs >$@ + +SERVERMINVERS = $(shell cat /usr/share/xserver-xorg/serverminver 2>/dev/null) +VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2>/dev/null) +INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2>/dev/null) +SERVER_DEPENDS = xserver-xorg-core (>= $(SERVERMINVERS)) +VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI) +INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI) +ifeq ($(PACKAGE),) +PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' < debian/control) +endif + +.PHONY: serverabi +serverabi: +ifeq ($(SERVERMINVERS),) + @echo error: xserver-xorg-dev needs to be installed + @exit 1 +else + echo "xserver:Depends=$(SERVER_DEPENDS)" >> debian/$(PACKAGE).substvars + echo "xviddriver:Provides=$(VIDDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars + echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars +endif + +include debian/xsfbs/xsfbs-autoreconf.mk + +# vim:set noet ai sts=8 sw=8 tw=0: