debian/0000755000000000000000000000000012246733211007167 5ustar debian/copyright0000644000000000000000000000270712246731611011132 0ustar This package was debianized by: Tom Lees on Fri, 12 Dec 1997 17:19:10 +0000 It was downloaded from: http://xmp.sourceforge.net/ Copyright: Copyright (C) 1996-2013 Claudio Matsuoka Copyright (C) 1996-2009 Hipolito Carraro Jr Upstream Authors: Claudio Matsuoka Hipolito Carraro Jr License: This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. On Debian GNU/Linux systems, the complete text of the GNU General Public License 2 can be found in `/usr/share/common-licenses/GPL-2'. The Debian packaging is: Copyright (C) 2007-2011, Gürkan Sengün Copyright (C) 2013, Stephen Kitt and is licensed under the GPL version 3, see `/usr/share/common-licenses/GPL-3'. debian/watch0000644000000000000000000000006312166245223010221 0ustar version=3 http://sf.net/xmp/xmp-([\d\.]+)\.tar\.gz debian/clean0000644000000000000000000000005312166245223010174 0ustar Makefile.rules depend src/include/config.h debian/gbp.conf0000644000000000000000000000012512166315570010611 0ustar # Configuration file for git-buildpackage and friends [DEFAULT] pristine-tar = True debian/patches/0000755000000000000000000000000012246733064010624 5ustar debian/patches/manpage-hyphens.patch0000644000000000000000000002657712246733046014752 0ustar Description: Use minus signs as appropriate in the man page Author: Stephen Kitt --- a/src/xmp.1 +++ b/src/xmp.1 @@ -5,182 +5,182 @@ .PP .SH "SYNOPSIS" \fBxmp\fP -[\fB-a, --amplify\fP \fIfactor\fP] -[\fB-b, --bits\fP \fIbits\fP] -[\fB-c, --stdout\fP] -[\fB-D\fP \fIdevice-specific parameters\fP] -[\fB-d, --driver\fP \fIdriver\fP] -[\fB-F, --nofilter\fP] -[\fB-f, --frequency\fP \fIrate\fP] -[\fB--fix-sample-loop\fP] -[\fB-h, --help\fP] -[\fB-I, --instrument-path\fP] -[\fB-i, --interpolation \fItype\fP] -[\fB--load-only\fP] -[\fB-L, --list-formats\fP] -[\fB-l, --loop\fP] -[\fB--loop-all\fP] -[\fB-M, --mute\fP \fIchannel-list\fP] -[\fB-m, --mono\fP] -[\fB-N, --null\fP] -[\fB--nocmd\fP] -[\fB-o, --output-file\fP \fIfilename\fP] -[\fB--offset-bug-emulation\fP] -[\fB-P, --pan\fP \fIpan\fP] -[\fB--probe-only\fP] -[\fB-q, --quiet\fP] -[\fB-R, --random\fP] -[\fB-S, --solo\fP \fIchannel-list\fP] -[\fB-s, --start\fP \fIpos\fP] -[\fB-t, --time\fP \fItime\fP] -[\fB-u, --unsigned\fP] -[\fB--vblank\fP] -[\fB-V, --version\fP] -[\fB-v, --verbose\fP] -[\fB-Z, --all-sequences\fP] -[\fB-z, --sequence\fP] +[\fB\-a, \-\-amplify\fP \fIfactor\fP] +[\fB\-b, \-\-bits\fP \fIbits\fP] +[\fB\-c, \-\-stdout\fP] +[\fB\-D\fP \fIdevice-specific parameters\fP] +[\fB\-d, \-\-driver\fP \fIdriver\fP] +[\fB\-F, \-\-nofilter\fP] +[\fB\-f, \-\-frequency\fP \fIrate\fP] +[\fB\-\-fix\-sample\-loop\fP] +[\fB\-h, \-\-help\fP] +[\fB\-I, \-\-instrument\-path\fP] +[\fB\-i, \-\-interpolation \fItype\fP] +[\fB\-\-load\-only\fP] +[\fB\-L, \-\-list\-formats\fP] +[\fB\-l, \-\-loop\fP] +[\fB\-\-loop\-all\fP] +[\fB\-M, \-\-mute\fP \fIchannel-list\fP] +[\fB\-m, \-\-mono\fP] +[\fB\-N, \-\-null\fP] +[\fB\-\-nocmd\fP] +[\fB\-o, \-\-output\-file\fP \fIfilename\fP] +[\fB\-\-offset\-bug\-emulation\fP] +[\fB\-P, \-\-pan\fP \fIpan\fP] +[\fB\-\-probe\-only\fP] +[\fB\-q, \-\-quiet\fP] +[\fB\-R, \-\-random\fP] +[\fB\-S, \-\-solo\fP \fIchannel-list\fP] +[\fB\-s, \-\-start\fP \fIpos\fP] +[\fB\-t, \-\-time\fP \fItime\fP] +[\fB\-u, \-\-unsigned\fP] +[\fB\-\-vblank\fP] +[\fB\-V, \-\-version\fP] +[\fB\-v, \-\-verbose\fP] +[\fB\-Z, \-\-all\-sequences\fP] +[\fB\-z, \-\-sequence\fP] \fImodules\fP .PP .SH "DESCRIPTION" \fBxmp\fP is a tracked music module player\&. It plays many module formats including Fasttracker II (XM), Noise/Fast/Protracker (MOD), Scream Tracker 3 (S3M) and Impulse Tracker (IT)\&. Run -\f(CWxmp --list-formats\fP for a complete list of supported formats\&. +\f(CWxmp \-\-list\-formats\fP for a complete list of supported formats\&. .PP .SH "OPTIONS" -.IP "\fB-a, --amplify\fP \fIfactor\fP" +.IP "\fB\-a, \-\-amplify\fP \fIfactor\fP" Amplification factor for the software mixer\&. Valid amplification factors range from 0 to 3. Default is 1. \&. Warning\&: higher amplification factors may cause distorted or noisy output\&. -.IP "\fB-b, --bits\fP \fIbits\fP" +.IP "\fB\-b, \-\-bits\fP \fIbits\fP" Set the software mixer resolution (8 or 16 bits)\&. If ommited, The audio device will be opened at the highest resolution available\&. -.IP "\fB-c, --stdout\fP" +.IP "\fB\-c, \-\-stdout\fP" Mix the module to stdout\&. -.IP "\fB-D\fP \fIdevice-specific parameter\fP" +.IP "\fB\-D\fP \fIdevice-specific parameter\fP" Pass a configuration parameter to the device driver\&. See the \fBDEVICE DRIVER PARAMETERS\fP section below for a list of known parameters\&. -.IP "\fB-d, --driver\fP \fIdriver\fP" +.IP "\fB\-d, \-\-driver\fP \fIdriver\fP" Select the output driver\&. If not specified, \fBxmp\fP will try to probe each available driver\&. -.IP "\fB-F, --nofilter\fP" +.IP "\fB\-F, \-\-nofilter\fP" Disable IT lowpass filter effect and envelopes. -.IP "\fB-f, --frequency\fP \fIrate\fP" +.IP "\fB\-f, \-\-frequency\fP \fIrate\fP" Set the software mixer sampling rate in hertz\&. -.IP "\fB--fix-sample-loop\fP" +.IP "\fB\-\-fix\-sample\-loop\fP" Halve sample loop start values\&. Use it to work around bad conversions from 15-instrument modules and to correctly play NoisePacker v2 and certain UNIC files. -.IP "\fB-h, --help\fP" +.IP "\fB\-h, \-\-help\fP" Show a short summary of command-line options\&. -.IP "\fB-I, --instrument-path\fP \fIpath\fP" +.IP "\fB\-I, \-\-instrument\-path\fP \fIpath\fP" Set the pathname to the directory containing external samples\&. -.IP "\fB-i, --interpolation\fP \fItype\fP" +.IP "\fB\-i, \-\-interpolation\fP \fItype\fP" Select interpolation type. Available types are \fInearest\fP for nearest-neighbor interpolation\&, \fIlinear\fI for linear interpolation\&, and \fIspline\fI for cubic spline interpolation\&. Default is cubic spline\&. -.IP "\fB--load-only\fP" +.IP "\fB\-\-load\-only\fP" Load module and exit\&. -.IP "\fB-L, --list-formats\fP" +.IP "\fB\-L, \-\-list\-formats\fP" List supported module formats\&. -.IP "\fB-l, --loop\fP" +.IP "\fB\-l, \-\-loop\fP" Enable module looping\&. -.IP "\fB--loop-all\fP" +.IP "\fB\-\-loop\-all\fP" Loop over the entire module list\&. -.IP "\fB-M, --mute\fP \fIchannel-list\fP" +.IP "\fB\-M, \-\-mute\fP \fIchannel-list\fP" Mute the specified channels\&. \fIchannel-list\fP is a comma-separated list of decimal channel ranges\&. Example: 0,2-4,8-16\&. -.IP "\fB-m, --mono\fP" +.IP "\fB\-m, \-\-mono\fP" Force mono output (default is stereo in stereo-capable devices)\&. -.IP "\fB-N, --null\fP" -Load and mix module, but discard output data (same as --device=null)\&. -.IP "\fB--nocmd\fP" +.IP "\fB\-N, \-\-null\fP" +Load and mix module, but discard output data (same as \-\-device=null)\&. +.IP "\fB\-\-nocmd\fP" Disable interactive commands\&. -.IP "\fB-o, --output-file\fP \fIfilename\fP" +.IP "\fB\-o, \-\-output\-file\fP \fIfilename\fP" Set the output file name when mixing to raw or WAV files\&. If \'-\' is given as the file name, the output will be sent to stdout\&. -.IP "\fB--offset-bug-emulation\fP" +.IP "\fB\-\-offset\-bug\-emulation\fP" Emulate Protracker 2.x handling of effect 0x09 (set sample offset)\&. -.IP "\fB-P, --pan\fP \fInum\fP" +.IP "\fB\-P, \-\-pan\fP \fInum\fP" Set the percentual panning amplitude\&. -.IP "\fB--probe-only\fP" +.IP "\fB\-\-probe\-only\fP" Exit after probing the audio device\&. -.IP "\fB-R, --random\fP" +.IP "\fB\-R, \-\-random\fP" Play modules in random order\&. -.IP "\fB-r, --reverse\fP" +.IP "\fB\-r, \-\-reverse\fP" Reverse left/right stereo channels\&. -.IP "\fB-S, --solo\fP \fIchannel-list\fP" +.IP "\fB\-S, \-\-solo\fP \fIchannel-list\fP" Play only the specified channels\&. \fIchannel-list\fP is a comma-separated list of decimal channel ranges\&. Example: 0,2-4,8-16\&. -.IP "\fB-s, --start\fP \fIpos\fP" +.IP "\fB\-s, \-\-start\fP \fIpos\fP" Start playing the module from the position \fIpos\fP\&. -.IP "\fB-t, --time\fP \fItime\fP" +.IP "\fB\-t, \-\-time\fP \fItime\fP" Specifies the maximum playing time to \fItime\fP seconds\&. -.IP "\fB-u, --unsigned\fP" +.IP "\fB\-u, \-\-unsigned\fP" Tell the software mixer to use unsigned samples when mixing to a file (default is signed)\&. -.IP "\fB--vblank\fP" +.IP "\fB\-\-vblank\fP" Force Amiga vblank-based timing (no CIA tempo setting)\&. -.IP "\fB-V, --version\fP" +.IP "\fB\-V, \-\-version\fP" Print version information\&. -.IP "\fB-v, --verbose\fP" +.IP "\fB\-v, \-\-verbose\fP" Verbose mode (incremental)\&. If specified more than once, the verbosity level will be increased (no messages will be displayed when the player runs in background)\&. -.IP "\fB-Z, --all-sequences\fP" +.IP "\fB\-Z, \-\-all\-sequences\fP" Play all hidden or alternative pattern sequences (subsongs) in module\&. -.IP "\fB-z, --sequence\fP \fInum\fP" +.IP "\fB\-z, \-\-sequence\fP \fInum\fP" Play hidden or alternative pattern sequence \fInum\fP\ (0 is the main sequence)\&. .PP .SH "DEVICE DRIVER PARAMETERS" -Use the option \fB-D\fP to send parameters directly to the device -drivers\&. Multiple \fB-D\fP options can be specified in the command line\&. +Use the option \fB\-D\fP to send parameters directly to the device +drivers\&. Multiple \fB\-D\fP options can be specified in the command line\&. .PP File output options: -.IP "\fB-D\fP \fIendian=big\fP" +.IP "\fB\-D\fP \fIendian=big\fP" Generate big-endian 16-bit samples (default is the machine byte ordering)\&. -.IP "\fB-D\fP \fIendian=little\fP" +.IP "\fB\-D\fP \fIendian=little\fP" Generate little-endian 16-bit samples (default is the machine byte ordering)\&. .PP ALSA driver options: -.IP "\fB-D\fP \fIbuffer=value\fP" +.IP "\fB\-D\fP \fIbuffer=value\fP" Set buffer size in ms\&. Default value is 250. -.IP "\fB-D\fP \fIperiod=value\fP" +.IP "\fB\-D\fP \fIperiod=value\fP" Set period time in ms\&. Default value is 50. -.IP "\fB-D\fP \fIcard=name\fP" +.IP "\fB\-D\fP \fIcard=name\fP" Choose the ALSA device to use\&. Default value is "default"\&. .PP OSS driver options: -.IP "\fB-D\fP \fIfrag=num,size\fP" +.IP "\fB\-D\fP \fIfrag=num,size\fP" Set the maximum number of fragments to \fInum\fP and the size of each fragment to \fIsize\fP bytes (must be a power of two)\&. The number and size of fragments set a tradeoff between the buffering latency and sensibility to system load\&. To get better synchronization, reduce the values\&. To avoid gaps in the sound playback, increase the values\&. -.IP "\fB-D\fP \fIdev=device_name\fP" +.IP "\fB\-D\fP \fIdev=device_name\fP" Set the audio device to open\&. Default is /dev/dsp\&. -.IP "\fB-D\fP \fInosync\fP" +.IP "\fB\-D\fP \fInosync\fP" Don\'t sync the OSS audio device between modules\&. .PP BSD driver options: -.IP "\fB-D\fP \fIgain=value\fP" +.IP "\fB\-D\fP \fIgain=value\fP" Set the audio gain\&. Valid values range from 0 to 255\&. The default is 128\&. -.IP "\fB-D\fP \fIbuffer=size\fP" +.IP "\fB\-D\fP \fIbuffer=size\fP" Set the size in bytes of the audio buffer\&. Default value is 32 Kb\&. .PP HP-UX and Solaris driver options: -.IP "\fB-D\fP \fIgain=value\fP" +.IP "\fB\-D\fP \fIgain=value\fP" Set the audio gain\&. Valid values range from 0 to 255\&. The default is 128\&. -.IP "\fB-D\fP \fIport={s|h|l}\fP" +.IP "\fB\-D\fP \fIport={s|h|l}\fP" Set the audio port\&. Valid arguments are \fIs\fP for the internal speaker, \fIh\fP for headphones and \fIl\fP for line out\&. The default is the internal speaker\&. -.IP "\fB-D\fP \fIbuffer=size\fP" +.IP "\fB\-D\fP \fIbuffer=size\fP" Set the size in bytes of the audio buffer\&. The default value is 32 Kb\&. .PP .SH "INTERACTIVE COMMANDS" @@ -222,27 +222,27 @@ .IP "\fB>\fP" Change to next sequence (subsong)\&. .PP -Interactive mode can be disabled using the \fB--nocmd\fP command +Interactive mode can be disabled using the \fB\-\-nocmd\fP command line option\&. .PP .SH "EXAMPLES" Play module and save output in a .wav file\&: .IP "" -\f(CWxmp -ofilename.wav module\&.mod\fP +\f(CWxmp \-ofilename.wav module\&.mod\fP .PP Play module muting channels 0 to 3 and 6\&: .IP "" -\f(CWxmp --mute=0-3,6 module\&.mod\&.gz\fP +\f(CWxmp \-\-mute=0\-3,6 module\&.mod\&.gz\fP .PP Play modules in /dev/dsp using the default device settings (unsigned 8bit, 8 kHz mono): .IP "" -\f(CWxmp -o/dev/dsp -f8000 -m -b8 -u module\&.lha\fP +\f(CWxmp \-o/dev/dsp \-f8000 \-m \-b8 \-u module\&.lha\fP .PP Play all XM modules in the /mod directory and all subdirectories in random order, ignoring any configuration set in the xmp\&.conf file\&: .IP "" -\f(CWxmp --norc -R `find /mod -name "*\&.xm" -print`\fP +\f(CWxmp \-\-norc \-R `find /mod \-name "*\&.xm" \-print`\fP .PP .SH "FILES" \f(CW/etc/xmp/xmp\&.conf\&, $HOME/\&.xmp/xmp\&.conf\&, /etc/xmp/modules\&.conf\&, $HOME/\&.xmp/modules\&.conf\fP debian/patches/series0000644000000000000000000000002612246732511012033 0ustar manpage-hyphens.patch debian/changelog0000644000000000000000000002721712246733164011061 0ustar xmp (4.0.6-1) unstable; urgency=low * New maintainer (closes: #691840). * New upstream version, based on libxmp (closes: #717855): - supports ALSA output (closes: #636862); - splits the audacious plugin into a separate project, so remove xmp-audacious and xmp-common; - supports LHA archives using a build-in decompressor in libxmp (closes: #697629); - displays total duration and elapsed time (closes: #191109). * Standards-Version 3.9.5, no change required. * Patch the manpage to fix hyphens used as minus signs. -- Stephen Kitt Sun, 01 Dec 2013 23:21:37 +0100 xmp (3.4.0-3) unstable; urgency=low * QA upload. * Add CVE-2013-1980.patch patch. CVE-2013-1980: fix MASI parsing buffer overflow. (Closes: #706667) -- Salvatore Bonaccorso Fri, 17 May 2013 08:51:40 +0200 xmp (3.4.0-2) unstable; urgency=low * QA upload. * Enable PulseAudio support (Closes: #650876). * debian/patches/audacious-3.3.patch: - Fix FTBFS with audacious 3.3 (Closes: #707424, LP: #1076497) * debian/patches/fix-audacious-xmp-plugin.patch: - Fix crash in audacious xmp plugin. Patch by Lem (~lem-jjr). (LP: #1066868) * Bump Standards-Version to 3.9.4 (no changes needed). * Switch to short-form debhelper 9. -- Benjamin Drung Sun, 12 May 2013 16:34:17 +0200 xmp (3.4.0-1.1) unstable; urgency=low * NMU upload. * debian/patches/audacious-3.1.patch: - Fix FTBFS with Audacious 3.2. (Closes: #657592) * debian/xmp-audacious.install: - Cope with audacious being built for multiarch. Thanks to Colin Watson for sending a fix! -- Artur Rona Sat, 21 Apr 2012 15:50:30 +0200 xmp (3.4.0-1) unstable; urgency=low * New upstream version. * Bump standards version to 3.9.2. * Switch to dpkg-source format version 3.0 (quilt). * Drop article from descriptions. * Update build-depends. (Closes: #634743) * debian/control: Drop conflicts. -- Gürkan Sengün Thu, 11 Aug 2011 10:02:29 +0200 xmp (3.3.0-1) unstable; urgency=low * New upstream version. * debian/copyright: updated years. * Bump standards version to 3.9.1. * Bump debhelper version to 8. -- Gürkan Sengün Thu, 02 Dec 2010 15:19:42 +0100 xmp (3.2.0-0.1) unstable; urgency=low * NMU * New upstream release (Closes: #586565) * debian/control - set "Standards-Version: 3.8.4" - Update Build-Depends from "audacious-plugins-dev" to "audacious-dev" (Closes: #583984) - add "Depends: ${misc:Depends}" to each package -- Hideki Yamane Tue, 29 Jun 2010 00:06:50 +0900 xmp (3.0.0+20090923-1) unstable; urgency=low * New upstream version. * Drop support for Arts and ESD and NAS, because they are obsoleted. -- Gürkan Sengün Wed, 23 Sep 2009 15:18:20 +0200 xmp (2.7.1-2) unstable; urgency=low * Fix manpage. (Closes: #542200) * Fix ./configure. (Closes: #541799) * Bump standards version. -- Gürkan Sengün Wed, 19 Aug 2009 23:06:11 +0200 xmp (2.7.1-1) unstable; urgency=low * New upstream version. (Closes: #483389, #442147) * Updated debian/copyright. * Don't build xmp-x11 anymore since it won't exist anymore. * debian/control: recommend unmo3. -- Gürkan Sengün Tue, 21 Jul 2009 09:19:14 +0200 xmp (2.6.1-1) unstable; urgency=low * New upstream version. * Update my email address. * Bump debhelper version. * Bump standards version. * Updated debian/copyright. -- Gürkan Sengün Mon, 29 Jun 2009 22:20:49 +0200 xmp (2.5.1-1) unstable; urgency=low * New upstream version. * Build audacious plugin. (Closes: #454630) * Add myself to Uploaders: after discussing with Gürkan. * Fix XMP plugin behaviour when built against Audacious 1.4 or later. * Remove XMMS plugin since XMMS is pending removal in Lenny. * Remove "shared" debian/copyright and debian/changelog insanity. * Majorly rework debian/rules to bring it in line with current standards and policy. * Fix FTBFS on Debian/kFreeBSD. * Fix watch file. (Closes: #453558) -- William Pitcock Sat, 08 Dec 2007 18:45:32 -0600 xmp (2.5.0-1) unstable; urgency=low * New upstream version. * debian/control: Priority optional, updated standards version. -- Gürkan Sengün Wed, 28 Nov 2007 11:08:48 +0100 xmp (2.5.0-pre2-1) experimental; urgency=low * New upstream version. * debian/control: Added libpulse-dev to build-depends. -- Gürkan Sengün Mon, 12 Nov 2007 14:24:24 +0100 xmp (2.4.1-1) unstable; urgency=low * New upstream version. (Closes: #448587) * New maintainer. * Cleaned up debian/rules. -- Gürkan Sengün Sun, 04 Nov 2007 23:16:11 +0100 xmp (2.3.2-1) unstable; urgency=low * QA upload. * New upstream version. * Typo in manpage fixed by upstream (closes: #442147). * Problems with impulse tracker mods seem also be fixed now (closes: #356204). * Add --enable-nas, --enable-arts to configure flags. * Remove libxmp2, xmp-alsa, and xmp-esd packages, since dynamic compilation of drivers is no longer supported. * X11 version was also dropped, made xmp-x11 dummy package depending on xmp. * Change architecture of xmp-common and xmp-x11 to all. * Move homepage URL from packages' descripions to its own fields. * Switch to ${binary:Version} instead of ${Source-Version}. -- Robert Luberda Sun, 21 Oct 2007 17:05:36 +0200 xmp (2.0.4d-12) unstable; urgency=low * Orphaning package, set maintainer to Debian QA Group. * Update config.{guess,sub}. * Turn /usr/share/doc/libxmp2 symlink into a regular directory. * Drop libxmp2 dependancy on xmp-common (closes: #355408). * Remove outdated xmp.preinst. * Standards-Version: 3.7.2. -- Robert Luberda Wed, 18 Apr 2007 22:03:31 +0200 xmp (2.0.4d-11) unstable; urgency=low * Add libxt-dev to build-dependencies to fix FTBFS. * Update config.{guess,sub}. -- Robert Luberda Sun, 18 Dec 2005 22:27:33 +0100 xmp (2.0.4d-10) unstable; urgency=low * Remove xlibs-dev build-dependency, use libxext-dev, libx11-dev instead. * Update FSF address in the copyright file (lintian). * Switch to debhelper v5. * Standards-Version: 3.6.2 (no changes). * Update debian/watch file, use qa.debian.org/watch/sf.php for the upstream site. -- Robert Luberda Sun, 18 Dec 2005 14:42:38 +0100 xmp (2.0.4d-9) unstable; urgency=low * Fix FTBFS on amd64 with gcc-4.0 (closes: #297307). * Updated alsa driver from the upstream CVS repository. * Fix minor typo in the description. -- Robert Luberda Thu, 10 Mar 2005 22:52:10 +0100 xmp (2.0.4d-8) unstable; urgency=low * Update alsa support for alsa 1.0. -- Robert Luberda Thu, 24 Feb 2005 22:00:07 +0100 xmp (2.0.4d-7) unstable; urgency=low * Fix FTBFS with gcc-3.4 (closes: #259940). * xmp and xmp-x11 packages suggest lha (closes: #221469). * Stricter dependencies of xmp-common (lintian). * Add debian/watch file. -- Robert Luberda Mon, 2 Aug 2004 18:15:50 +0200 xmp (2.0.4d-6) unstable; urgency=low * Fix binary packages' descriptions (closes: #210045, #210069). Thanks to Marek Habersack for the patch. * Add homepage link to descriptions. * Standards-Version: 3.6.1 (no changes). -- Robert Luberda Mon, 13 Oct 2003 19:43:34 +0200 xmp (2.0.4d-5) unstable; urgency=low * loaders/it_load.c, xmms/plugin.c: Fix gcc-3.3 build failure (closes: #196540). * Link all plugin files with libxmp and libc6 (lintian): + rename _init() to _xmp_init() to avoid conflict with libc6 _init. * Fix Makefiles. * Updated config.{guess,sub}. * Standards-Version: 3.5.10 (no changes). -- Robert Luberda Wed, 11 Jun 2003 08:21:09 +0200 xmp (2.0.4d-4) unstable; urgency=low * Rebuilt with libasound2-dev (closes: #185590): + configure.in, alsa-mix.c: Applied ALSA 0.9.0 patch from Jon Daniel, found on xmp-devel mailing list at SourceForge. * Fix synopsis of xmp-xmms package (lintian). * debian/rules: Handle DEB_BUILD_OPTIONS=noopt instead of debug. * debian/rules: List binary-common in .PHONY target. * Standards-Version: 3.5.9. -- Robert Luberda Sun, 23 Mar 2003 21:18:56 +0100 xmp (2.0.4d-3) unstable; urgency=low * Added missing #include to src/main/main.c and src/misc/control.c (closes: #156147) -- Robert Luberda Sat, 17 Aug 2002 20:51:24 +0200 xmp (2.0.4d-2) unstable; urgency=low * Ooops, etc/xmp* files weren't installed. * Compile shared libs with -fPIC. -- Robert Luberda Mon, 24 Jun 2002 23:16:02 +0200 xmp (2.0.4d-1) unstable; urgency=low * New maintainer (closes: #123516). * New upstream version (closes: #27570): + The source package was generated by running `make dist-dfsg' in the original upstream source tree (thus the letter `d' in the version number) to get rid of not DFSG-free sources. + New binary packages: libxmp2, xmp-common, xmp-x11, xmp-xmms, xmp-esd, xmp-alsa. + Does not segfault on tbo_atb.xm file (closes: #52798). + No longer includes xml.html and FAQ.html documentation files, so remove doc-base and dwww support (closes: #149546). * esd.c, alsa_mix.c: added missing XMP_DRV_REGISTER line. * drivers.c: fix problem with loading drivers when XMP_LIB_PATH environment variable is unset. * configure.h: don't link xmp and xxmp against libasound1 if we use dynamic drivers. * Fixed some other linking problems. * Update config.{guess,sub} and install.sh files. * Removed xmp-view wrapper. Added `test -[zn] "$DISPLAY"' lines into mime files instead (closes: #39465). * Repackaged with debhelper v4. * Standards-Version: 3.5.6 * Added support for DEB_BUILD_OPTIONS. -- Robert Luberda Mon, 17 Jun 2002 07:44:08 +0200 xmp (1.1.3-1.3) unstable; urgency=low * Set maintainer to Debian QA Group . -- Thomas Bushnell, BSG Sun, 30 Dec 2001 18:50:22 -0800 xmp (1.1.3-1.2) unstable; urgency=low * Non-maintainer upload. * debian/preinst: Make sure /usr/doc/xmp/.dhelp is gone (closes: #107238). * debian/rules: Only run 'make install' in the src directory, as rules in the other directories try to write into the real filesystem. -- Colin Watson Sun, 11 Nov 2001 13:28:05 +0000 xmp (1.1.3-1.1) unstable; urgency=low * Non-maintainer upload. * Updated to policy version 3.1.1 and added build dependencies. * FHS transition (closes: #91096, #91708). * Converted to update-mime, via dh_installmime (closes: #74486, #81341). * Let dh_installdocs do the doc-base handling. * Removed call to obsolete dh_suidregister. * Removed add-log-mailing-address from this changelog (~/.emacs is preferred). * The clean target didn't work for me, so fixed it. * Updated GPL pointer in copyright file. * Removed package name from short description (lintian). -- Colin Watson Tue, 15 May 2001 13:28:48 +0100 xmp (1.1.3-1) unstable; urgency=low * New release. * Now uses debhelper. * Added MIME handling. * Add doc-base support. -- Tom Lees Sun, 8 Mar 1998 12:05:47 +0000 xmp (1.1.0-1) unstable; urgency=low * New release. -- Tom Lees Thu, 1 Jan 1998 10:49:46 +0000 xmp (1.1.0dev28-1) unstable; urgency=low * New release. * Compiled for libc6. -- Tom Lees Fri, 12 Dec 1997 17:19:10 +0000 debian/source/0000755000000000000000000000000012166245223010471 5ustar debian/source/format0000644000000000000000000000001412166245223011677 0ustar 3.0 (quilt) debian/control0000644000000000000000000000175312246732323010603 0ustar Source: xmp Section: sound Priority: optional Maintainer: Stephen Kitt Standards-Version: 3.9.5 Build-Depends: autotools-dev, debhelper (>= 9), libasound2-dev (>= 1.0) [linux-any] | libasound-dev (>= 1.0) [linux-any], libaudio-dev (>= 1.9), libpulse-dev, libxmp-dev Homepage: http://xmp.sourceforge.net/ Package: xmp Architecture: any Depends: ${misc:Depends}, ${shlibs:Depends} Provides: xmp-player Replaces: xmp-common (<< 4.0.6) Description: module player supporting AWE32, GUS, and software-mixing xmp is a multi-format module player for UNIX. In machines with GUS or AWE cards xmp takes advantage of the OSS sequencer to play modules with virtually no system load. Using software mixing, xmp plays at sampling rates up to 48 kHz in mono or stereo, 8 or 16 bits, signed or unsigned, little or big endian samples with 32 bit linear interpolation. xmp currently supports more than 40 module formats. debian/compat0000644000000000000000000000000212166245223010367 0ustar 9 debian/rules0000755000000000000000000000020512246634763010260 0ustar #!/usr/bin/make -f %: dh $@ --parallel --with autotools_dev override_dh_auto_configure: dh_auto_configure -- --enable-pulseaudio debian/xmp.mime0000644000000000000000000000321412166245223010646 0ustar application/x-xm; xmp %s; test=test -z "$DISPLAY"; needsterminal; description=Module file; nametemplate=%s.xm application/x-mod; xmp %s; test=test -z "$DISPLAY"; needsterminal; description=Module file; nametemplate=%s.mod application/x-nst; xmp %s; test=test -z "$DISPLAY"; needsterminal; description=Module file; nametemplate=%s.nst application/x-s3m; xmp %s; test=test -z "$DISPLAY"; needsterminal; description=Module file; nametemplate=%s.s3m application/x-it; xmp %s; test=test -z "$DISPLAY"; needsterminal; description=Module file; nametemplate=%s.it application/x-stm; xmp %s; test=test -z "$DISPLAY"; needsterminal; description=Module file; nametemplate=%s.stm application/x-stx; xmp %s; test=test -z "$DISPLAY"; needsterminal; description=Module file; nametemplate=%s.stx application/x-mtm; xmp %s; test=test -z "$DISPLAY"; needsterminal; description=Module file; nametemplate=%s.mtm application/x-ptm; xmp %s; test=test -z "$DISPLAY"; needsterminal; description=Module file; nametemplate=%s.ptm application/x-okt; xmp %s; test=test -z "$DISPLAY"; needsterminal; description=Module file; nametemplate=%s.okt application/x-far; xmp %s; test=test -z "$DISPLAY"; needsterminal; description=Module file; nametemplate=%s.far application/x-wow; xmp %s; test=test -z "$DISPLAY"; needsterminal; description=Module file; nametemplate=%s.wow application/x-mdl; xmp %s; test=test -z "$DISPLAY"; needsterminal; description=Module file; nametemplate=%s.mdl application/x-669; xmp %s; test=test -z "$DISPLAY"; needsterminal; description=Module file; nametemplate=%s.669 application/x-alm; xmp %s; test=test -z "$DISPLAY"; needsterminal; description=Module file; nametemplate=%s.alm debian/xmp.docs0000644000000000000000000000001712246635321010646 0ustar CREDITS README