xf86-video-neomagic-1.2.9/ 0000755 0001750 0001750 00000000000 12523103404 012175 5 0000000 0000000 xf86-video-neomagic-1.2.9/README 0000644 0001750 0001750 00000010710 12216130746 013004 0000000 0000000
Information for NeoMagic Users
NeoMagic Driver Version 0.2/4.0
(based on version 2.0.0/3.3.3)
1) Supported hardware
* NeoMagic 2200 (MagicMedia256AV)
* NeoMagic 2160 (MagicGraph128XD)
* NeoMagic 2097 (MagicGraph128ZV+)
* NeoMagic 2093 (MagicGraph128ZV)
* NeoMagic 2090 (MagicGraph128V)
* NeoMagic 2070 (MagicGraph128)
2) Features
* Full support for internal flat panels, external monitors, and
simultaneous internal/external displays.
* Complete set of Panel Resolutions supported including stretch and
centering modes for running lower resolutions on fixed resolution
panels.
* Support for depths of 8, 15, 16 and 24 bits per pixel.
* Hardware Cursor support to reduce sprite flicker.
* Hardware accelerated drawing engine for 8, 15 and 16 bit per
pixel modes.
* Fully programmable clocks supported in external monitor only
mode.
* Robust text mode restore for VT switching.
3) Technical Notes
* Enable both internal "intern_disp" and external "extern_disp"
options to get simultaneous panel/CRT support.
4) Reported Working Laptops
* Acer Travelmate 7120T
* Acer Extensa 367, 367D & 710TE
* Actebis TN559Pro
* Asus P6300
* CTX EzBook 700 & 77X series
* Compaq Presario 1080, 1210, 1215, 1220, 1610, 1611, 1620, 1621 & 1640
* Dell Inspiron 3000 & 3200
* Dell Latitude CP, CPi, LM & XPi
* Digital VP HiNote 575, 703, 717 & 720
* FIC DESIGNote 5550
* Fujitsu LifeBook 420D & 656Tx
* Gateway 2000 Solo 2300XL, 2500LS & 5150
* Highscreen XD Advance II 21,1" TFT
* Hi-Grade Notino AS6000 pII/266Mhz
* Hitachi VisionBook Plus 5000
* HP Omnibook 800, 3000, 3100, 4100 & Sojourn
* IBM ThinkPad 380D, 380E, 380ED, 380XD, 385XD, 560X & 600
* LEO DESIGNote 5550
* Micron Transport XKE
* NEC Ready 330T
* NEC Versa 2780 MT, 5060X, 5080X, 6060 & 6230
* NEC MB12C/UV (mobio NX)
* OPTI Phoenix
* Panasonic CF_S21, CF-25 MKIII & CF-35
* Quantex H-1330
* Sceptre 4500
* SEH DESIGNote 5550
* Siemens Nixdorf Scenic 510
* Sony PCG-505, PCG-705, PCG-717, PCG-719 & PCG-731
* TI Extensa 660 CDT
* Toshiba Libretto 100CT
* Toshiba Protege SS3000
* UMAX 520T
5) Configuration
The driver auto-detects all device info included memory size, so
use the following device section in your XF86Config file:
Section "Device"
Identifier "NeoMagic"
EndSection
or let xf86config or XF86Setup do this for you.
But if you have problems with auto-detection, you can specify:
VideoRam - in kilobytes
DacSpeed - in MHz
MemBase - physical address of the linear framebuffer
IOBase - physical address of the memory mapped IO registers
6) Driver Options
"no_linear" - banked framebuffer mode
"no_accel" - software rendering only
"sw_cursor" - software cursor only
"no_mmio" - use I/O space directly
"intern_disp" - enable internal display (default)
"extern_disp" - enable external display
"no_stretch" - disable stretching of lower resolution modes on panel
"lcd_center" - center lower resolution modes on panel
NOTE: Stretching of panel image is on by default for lower panel
resolutions.
Options useful for special lcd mode setting (should not be needed):
"prog_lcd_mode_regs" - set special lcd mode registers (2070 default)
"no_prog_lcd_mode_regs" - don't set lcd mode registers (non-2070 default)
"prog_lcd_mode_stretch" - force lcd mode regs if stretching is enabled
"no_prog_lcd_mode_stretch" - no lcd mode regs if stretching (default)
Option for subnotebooks and other laptops with uncommon size panels:
"override_validate_mode" - disable LCD mode checking
WARNING: Disabling mode checking will allow for invalid modes that
could damage your LCD.
7) Known Limitations
* External monitor support on the NM2070.
* Banked, or no_linear mode on the NM2070.
* Horizontal centering for lower than panel resolution on NM2070.
8) Authors
The original version of the driver - written for Xfree86 3.3 -
done by:
Jens Owen (jens@tungstengraphics.com)
Kevin E. Martin (kevin@precisioninsight.com)
Precision Insight, Inc.
Cedar Park, TX USA
http://www.precisioninsight.com
Port to Xfree86 4.0 done by:
Egbert Eich (Egbert.Eich@Physik.TU-Darmstadt.de)
$XFree86: xc/programs/Xserver/hw/xfree86/drivers/neomagic/README,v 1.2 2002/10/30 12:52:20 alanh Exp $
xf86-video-neomagic-1.2.9/config.sub 0000755 0001750 0001750 00000105775 12523102723 014122 0000000 0000000 #! /bin/sh
# Configuration validation subroutine script.
# Copyright 1992-2014 Free Software Foundation, Inc.
timestamp='2014-09-11'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see .
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that
# program. This Exception is an additional permission under section 7
# of the GNU General Public License, version 3 ("GPLv3").
# Please send patches with a ChangeLog entry to config-patches@gnu.org.
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# If it is invalid, we print an error message on stderr and exit with code 1.
# Otherwise, we print the canonical config type on stdout and succeed.
# You can get the latest version of this script from:
# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
# This file is supposed to be the same for all GNU packages
# and recognize all the CPU types, system types and aliases
# that are meaningful with *any* GNU software.
# Each package is responsible for reporting which valid configurations
# it does not support. The user should be able to distinguish
# a failure to support a valid configuration from a meaningless
# configuration.
# The goal of this file is to map all the various variations of a given
# machine specification into a single specification in the form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
# or in some cases, the newer four-part form:
# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
# It is wrong to echo any other type of specification.
me=`echo "$0" | sed -e 's,.*/,,'`
usage="\
Usage: $0 [OPTION] CPU-MFR-OPSYS
$0 [OPTION] ALIAS
Canonicalize a configuration name.
Operation modes:
-h, --help print this help, then exit
-t, --time-stamp print date of last modification, then exit
-v, --version print version number, then exit
Report bugs and patches to ."
version="\
GNU config.sub ($timestamp)
Copyright 1992-2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
help="
Try \`$me --help' for more information."
# Parse command line
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
echo "$timestamp" ; exit ;;
--version | -v )
echo "$version" ; exit ;;
--help | --h* | -h )
echo "$usage"; exit ;;
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
break ;;
-* )
echo "$me: invalid option $1$help"
exit 1 ;;
*local*)
# First pass through any local machine types.
echo $1
exit ;;
* )
break ;;
esac
done
case $# in
0) echo "$me: missing argument$help" >&2
exit 1;;
1) ;;
*) echo "$me: too many arguments$help" >&2
exit 1;;
esac
# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
knetbsd*-gnu* | netbsd*-gnu* | \
kopensolaris*-gnu* | \
storm-chaos* | os2-emx* | rtmk-nova*)
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
android-linux)
os=-linux-android
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
;;
*)
basic_machine=`echo $1 | sed 's/-[^-]*$//'`
if [ $basic_machine != $1 ]
then os=`echo $1 | sed 's/.*-/-/'`
else os=; fi
;;
esac
### Let's recognize common machines as not being operating systems so
### that things like config.sub decstation-3100 work. We also
### recognize some manufacturers as not being operating systems, so we
### can provide default operating systems below.
case $os in
-sun*os*)
# Prevent following clause from handling this invalid input.
;;
-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-apple | -axis | -knuth | -cray | -microblaze*)
os=
basic_machine=$1
;;
-bluegene*)
os=-cnk
;;
-sim | -cisco | -oki | -wec | -winbond)
os=
basic_machine=$1
;;
-scout)
;;
-wrs)
os=-vxworks
basic_machine=$1
;;
-chorusos*)
os=-chorusos
basic_machine=$1
;;
-chorusrdb)
os=-chorusrdb
basic_machine=$1
;;
-hiux*)
os=-hiuxwe2
;;
-sco6)
os=-sco5v6
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco5)
os=-sco3.2v5
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco4)
os=-sco3.2v4
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco3.2.[4-9]*)
os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco3.2v[4-9]*)
# Don't forget version if it is 3.2v4 or newer.
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco5v6*)
# Don't forget version if it is 3.2v4 or newer.
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco*)
os=-sco3.2v2
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-udk*)
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-isc)
os=-isc2.2
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-clix*)
basic_machine=clipper-intergraph
;;
-isc*)
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-lynx*178)
os=-lynxos178
;;
-lynx*5)
os=-lynxos5
;;
-lynx*)
os=-lynxos
;;
-ptx*)
basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
;;
-windowsnt*)
os=`echo $os | sed -e 's/windowsnt/winnt/'`
;;
-psos*)
os=-psos
;;
-mint | -mint[0-9]*)
basic_machine=m68k-atari
os=-mint
;;
esac
# Decode aliases for certain CPU-COMPANY combinations.
case $basic_machine in
# Recognize the basic CPU types without company name.
# Some are omitted here because they have special meanings below.
1750a | 580 \
| a29k \
| aarch64 | aarch64_be \
| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
| am33_2.0 \
| arc | arceb \
| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
| avr | avr32 \
| be32 | be64 \
| bfin \
| c4x | c8051 | clipper \
| d10v | d30v | dlx | dsp16xx \
| epiphany \
| fido | fr30 | frv \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| hexagon \
| i370 | i860 | i960 | ia64 \
| ip2k | iq2000 \
| k1om \
| le32 | le64 \
| lm32 \
| m32c | m32r | m32rle | m68000 | m68k | m88k \
| maxq | mb | microblaze | microblazeel | mcore | mep | metag \
| mips | mipsbe | mipseb | mipsel | mipsle \
| mips16 \
| mips64 | mips64el \
| mips64octeon | mips64octeonel \
| mips64orion | mips64orionel \
| mips64r5900 | mips64r5900el \
| mips64vr | mips64vrel \
| mips64vr4100 | mips64vr4100el \
| mips64vr4300 | mips64vr4300el \
| mips64vr5000 | mips64vr5000el \
| mips64vr5900 | mips64vr5900el \
| mipsisa32 | mipsisa32el \
| mipsisa32r2 | mipsisa32r2el \
| mipsisa32r6 | mipsisa32r6el \
| mipsisa64 | mipsisa64el \
| mipsisa64r2 | mipsisa64r2el \
| mipsisa64r6 | mipsisa64r6el \
| mipsisa64sb1 | mipsisa64sb1el \
| mipsisa64sr71k | mipsisa64sr71kel \
| mipsr5900 | mipsr5900el \
| mipstx39 | mipstx39el \
| mn10200 | mn10300 \
| moxie \
| mt \
| msp430 \
| nds32 | nds32le | nds32be \
| nios | nios2 | nios2eb | nios2el \
| ns16k | ns32k \
| open8 | or1k | or1knd | or32 \
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle \
| pyramid \
| riscv32 | riscv64 \
| rl78 | rx \
| score \
| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
| spu \
| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
| ubicom32 \
| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
| we32k \
| x86 | xc16x | xstormy16 | xtensa \
| z8k | z80)
basic_machine=$basic_machine-unknown
;;
c54x)
basic_machine=tic54x-unknown
;;
c55x)
basic_machine=tic55x-unknown
;;
c6x)
basic_machine=tic6x-unknown
;;
m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
basic_machine=$basic_machine-unknown
os=-none
;;
m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
;;
ms1)
basic_machine=mt-unknown
;;
strongarm | thumb | xscale)
basic_machine=arm-unknown
;;
xgate)
basic_machine=$basic_machine-unknown
os=-none
;;
xscaleeb)
basic_machine=armeb-unknown
;;
xscaleel)
basic_machine=armel-unknown
;;
# We use `pc' rather than `unknown'
# because (1) that's what they normally are, and
# (2) the word "unknown" tends to confuse beginning users.
i*86 | x86_64)
basic_machine=$basic_machine-pc
;;
# Object if more than one company name word.
*-*-*)
echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
exit 1
;;
# Recognize the basic CPU types with company name.
580-* \
| a29k-* \
| aarch64-* | aarch64_be-* \
| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
| avr-* | avr32-* \
| be32-* | be64-* \
| bfin-* | bs2000-* \
| c[123]* | c30-* | [cjt]90-* | c4x-* \
| c8051-* | clipper-* | craynv-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
| elxsi-* \
| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
| h8300-* | h8500-* \
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
| hexagon-* \
| i*86-* | i860-* | i960-* | ia64-* \
| ip2k-* | iq2000-* \
| k1om-* \
| le32-* | le64-* \
| lm32-* \
| m32c-* | m32r-* | m32rle-* \
| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
| microblaze-* | microblazeel-* \
| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
| mips16-* \
| mips64-* | mips64el-* \
| mips64octeon-* | mips64octeonel-* \
| mips64orion-* | mips64orionel-* \
| mips64r5900-* | mips64r5900el-* \
| mips64vr-* | mips64vrel-* \
| mips64vr4100-* | mips64vr4100el-* \
| mips64vr4300-* | mips64vr4300el-* \
| mips64vr5000-* | mips64vr5000el-* \
| mips64vr5900-* | mips64vr5900el-* \
| mipsisa32-* | mipsisa32el-* \
| mipsisa32r2-* | mipsisa32r2el-* \
| mipsisa32r6-* | mipsisa32r6el-* \
| mipsisa64-* | mipsisa64el-* \
| mipsisa64r2-* | mipsisa64r2el-* \
| mipsisa64r6-* | mipsisa64r6el-* \
| mipsisa64sb1-* | mipsisa64sb1el-* \
| mipsisa64sr71k-* | mipsisa64sr71kel-* \
| mipsr5900-* | mipsr5900el-* \
| mipstx39-* | mipstx39el-* \
| mmix-* \
| mt-* \
| msp430-* \
| nds32-* | nds32le-* | nds32be-* \
| nios-* | nios2-* | nios2eb-* | nios2el-* \
| none-* | np1-* | ns16k-* | ns32k-* \
| open8-* \
| or1k*-* \
| orion-* \
| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
| pyramid-* \
| rl78-* | romp-* | rs6000-* | rx-* \
| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
| sparclite-* \
| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
| tahoe-* \
| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
| tile*-* \
| tron-* \
| ubicom32-* \
| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
| vax-* \
| we32k-* \
| x86-* | x86_64-* | xc16x-* | xps100-* \
| xstormy16-* | xtensa*-* \
| ymp-* \
| z8k-* | z80-*)
;;
# Recognize the basic CPU types without company name, with glob match.
xtensa*)
basic_machine=$basic_machine-unknown
;;
# Recognize the various machine names and aliases which stand
# for a CPU type and a company and sometimes even an OS.
386bsd)
basic_machine=i386-unknown
os=-bsd
;;
3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
basic_machine=m68000-att
;;
3b*)
basic_machine=we32k-att
;;
a29khif)
basic_machine=a29k-amd
os=-udi
;;
abacus)
basic_machine=abacus-unknown
;;
adobe68k)
basic_machine=m68010-adobe
os=-scout
;;
alliant | fx80)
basic_machine=fx80-alliant
;;
altos | altos3068)
basic_machine=m68k-altos
;;
am29k)
basic_machine=a29k-none
os=-bsd
;;
amd64)
basic_machine=x86_64-pc
;;
amd64-*)
basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
amdahl)
basic_machine=580-amdahl
os=-sysv
;;
amiga | amiga-*)
basic_machine=m68k-unknown
;;
amigaos | amigados)
basic_machine=m68k-unknown
os=-amigaos
;;
amigaunix | amix)
basic_machine=m68k-unknown
os=-sysv4
;;
apollo68)
basic_machine=m68k-apollo
os=-sysv
;;
apollo68bsd)
basic_machine=m68k-apollo
os=-bsd
;;
aros)
basic_machine=i386-pc
os=-aros
;;
aux)
basic_machine=m68k-apple
os=-aux
;;
balance)
basic_machine=ns32k-sequent
os=-dynix
;;
blackfin)
basic_machine=bfin-unknown
os=-linux
;;
blackfin-*)
basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
os=-linux
;;
bluegene*)
basic_machine=powerpc-ibm
os=-cnk
;;
c54x-*)
basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
c55x-*)
basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
c6x-*)
basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
c90)
basic_machine=c90-cray
os=-unicos
;;
cegcc)
basic_machine=arm-unknown
os=-cegcc
;;
convex-c1)
basic_machine=c1-convex
os=-bsd
;;
convex-c2)
basic_machine=c2-convex
os=-bsd
;;
convex-c32)
basic_machine=c32-convex
os=-bsd
;;
convex-c34)
basic_machine=c34-convex
os=-bsd
;;
convex-c38)
basic_machine=c38-convex
os=-bsd
;;
cray | j90)
basic_machine=j90-cray
os=-unicos
;;
craynv)
basic_machine=craynv-cray
os=-unicosmp
;;
cr16 | cr16-*)
basic_machine=cr16-unknown
os=-elf
;;
crds | unos)
basic_machine=m68k-crds
;;
crisv32 | crisv32-* | etraxfs*)
basic_machine=crisv32-axis
;;
cris | cris-* | etrax*)
basic_machine=cris-axis
;;
crx)
basic_machine=crx-unknown
os=-elf
;;
da30 | da30-*)
basic_machine=m68k-da30
;;
decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
basic_machine=mips-dec
;;
decsystem10* | dec10*)
basic_machine=pdp10-dec
os=-tops10
;;
decsystem20* | dec20*)
basic_machine=pdp10-dec
os=-tops20
;;
delta | 3300 | motorola-3300 | motorola-delta \
| 3300-motorola | delta-motorola)
basic_machine=m68k-motorola
;;
delta88)
basic_machine=m88k-motorola
os=-sysv3
;;
dicos)
basic_machine=i686-pc
os=-dicos
;;
djgpp)
basic_machine=i586-pc
os=-msdosdjgpp
;;
dpx20 | dpx20-*)
basic_machine=rs6000-bull
os=-bosx
;;
dpx2* | dpx2*-bull)
basic_machine=m68k-bull
os=-sysv3
;;
ebmon29k)
basic_machine=a29k-amd
os=-ebmon
;;
elxsi)
basic_machine=elxsi-elxsi
os=-bsd
;;
encore | umax | mmax)
basic_machine=ns32k-encore
;;
es1800 | OSE68k | ose68k | ose | OSE)
basic_machine=m68k-ericsson
os=-ose
;;
fx2800)
basic_machine=i860-alliant
;;
genix)
basic_machine=ns32k-ns
;;
gmicro)
basic_machine=tron-gmicro
os=-sysv
;;
go32)
basic_machine=i386-pc
os=-go32
;;
h3050r* | hiux*)
basic_machine=hppa1.1-hitachi
os=-hiuxwe2
;;
h8300hms)
basic_machine=h8300-hitachi
os=-hms
;;
h8300xray)
basic_machine=h8300-hitachi
os=-xray
;;
h8500hms)
basic_machine=h8500-hitachi
os=-hms
;;
harris)
basic_machine=m88k-harris
os=-sysv3
;;
hp300-*)
basic_machine=m68k-hp
;;
hp300bsd)
basic_machine=m68k-hp
os=-bsd
;;
hp300hpux)
basic_machine=m68k-hp
os=-hpux
;;
hp3k9[0-9][0-9] | hp9[0-9][0-9])
basic_machine=hppa1.0-hp
;;
hp9k2[0-9][0-9] | hp9k31[0-9])
basic_machine=m68000-hp
;;
hp9k3[2-9][0-9])
basic_machine=m68k-hp
;;
hp9k6[0-9][0-9] | hp6[0-9][0-9])
basic_machine=hppa1.0-hp
;;
hp9k7[0-79][0-9] | hp7[0-79][0-9])
basic_machine=hppa1.1-hp
;;
hp9k78[0-9] | hp78[0-9])
# FIXME: really hppa2.0-hp
basic_machine=hppa1.1-hp
;;
hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
# FIXME: really hppa2.0-hp
basic_machine=hppa1.1-hp
;;
hp9k8[0-9][13679] | hp8[0-9][13679])
basic_machine=hppa1.1-hp
;;
hp9k8[0-9][0-9] | hp8[0-9][0-9])
basic_machine=hppa1.0-hp
;;
hppa-next)
os=-nextstep3
;;
hppaosf)
basic_machine=hppa1.1-hp
os=-osf
;;
hppro)
basic_machine=hppa1.1-hp
os=-proelf
;;
i370-ibm* | ibm*)
basic_machine=i370-ibm
;;
i*86v32)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv32
;;
i*86v4*)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv4
;;
i*86v)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv
;;
i*86sol2)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-solaris2
;;
i386mach)
basic_machine=i386-mach
os=-mach
;;
i386-vsta | vsta)
basic_machine=i386-unknown
os=-vsta
;;
iris | iris4d)
basic_machine=mips-sgi
case $os in
-irix*)
;;
*)
os=-irix4
;;
esac
;;
isi68 | isi)
basic_machine=m68k-isi
os=-sysv
;;
m68knommu)
basic_machine=m68k-unknown
os=-linux
;;
m68knommu-*)
basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
os=-linux
;;
m88k-omron*)
basic_machine=m88k-omron
;;
magnum | m3230)
basic_machine=mips-mips
os=-sysv
;;
merlin)
basic_machine=ns32k-utek
os=-sysv
;;
microblaze*)
basic_machine=microblaze-xilinx
;;
mingw64)
basic_machine=x86_64-pc
os=-mingw64
;;
mingw32)
basic_machine=i686-pc
os=-mingw32
;;
mingw32ce)
basic_machine=arm-unknown
os=-mingw32ce
;;
miniframe)
basic_machine=m68000-convergent
;;
*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
basic_machine=m68k-atari
os=-mint
;;
mips3*-*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
;;
mips3*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
;;
monitor)
basic_machine=m68k-rom68k
os=-coff
;;
morphos)
basic_machine=powerpc-unknown
os=-morphos
;;
moxiebox)
basic_machine=moxie-unknown
os=-moxiebox
;;
msdos)
basic_machine=i386-pc
os=-msdos
;;
ms1-*)
basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
;;
msys)
basic_machine=i686-pc
os=-msys
;;
mvs)
basic_machine=i370-ibm
os=-mvs
;;
nacl)
basic_machine=le32-unknown
os=-nacl
;;
ncr3000)
basic_machine=i486-ncr
os=-sysv4
;;
netbsd386)
basic_machine=i386-unknown
os=-netbsd
;;
netwinder)
basic_machine=armv4l-rebel
os=-linux
;;
news | news700 | news800 | news900)
basic_machine=m68k-sony
os=-newsos
;;
news1000)
basic_machine=m68030-sony
os=-newsos
;;
news-3600 | risc-news)
basic_machine=mips-sony
os=-newsos
;;
necv70)
basic_machine=v70-nec
os=-sysv
;;
next | m*-next )
basic_machine=m68k-next
case $os in
-nextstep* )
;;
-ns2*)
os=-nextstep2
;;
*)
os=-nextstep3
;;
esac
;;
nh3000)
basic_machine=m68k-harris
os=-cxux
;;
nh[45]000)
basic_machine=m88k-harris
os=-cxux
;;
nindy960)
basic_machine=i960-intel
os=-nindy
;;
mon960)
basic_machine=i960-intel
os=-mon960
;;
nonstopux)
basic_machine=mips-compaq
os=-nonstopux
;;
np1)
basic_machine=np1-gould
;;
neo-tandem)
basic_machine=neo-tandem
;;
nse-tandem)
basic_machine=nse-tandem
;;
nsr-tandem)
basic_machine=nsr-tandem
;;
op50n-* | op60c-*)
basic_machine=hppa1.1-oki
os=-proelf
;;
openrisc | openrisc-*)
basic_machine=or32-unknown
;;
os400)
basic_machine=powerpc-ibm
os=-os400
;;
OSE68000 | ose68000)
basic_machine=m68000-ericsson
os=-ose
;;
os68k)
basic_machine=m68k-none
os=-os68k
;;
pa-hitachi)
basic_machine=hppa1.1-hitachi
os=-hiuxwe2
;;
paragon)
basic_machine=i860-intel
os=-osf
;;
parisc)
basic_machine=hppa-unknown
os=-linux
;;
parisc-*)
basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
os=-linux
;;
pbd)
basic_machine=sparc-tti
;;
pbb)
basic_machine=m68k-tti
;;
pc532 | pc532-*)
basic_machine=ns32k-pc532
;;
pc98)
basic_machine=i386-pc
;;
pc98-*)
basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pentium | p5 | k5 | k6 | nexgen | viac3)
basic_machine=i586-pc
;;
pentiumpro | p6 | 6x86 | athlon | athlon_*)
basic_machine=i686-pc
;;
pentiumii | pentium2 | pentiumiii | pentium3)
basic_machine=i686-pc
;;
pentium4)
basic_machine=i786-pc
;;
pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pentiumpro-* | p6-* | 6x86-* | athlon-*)
basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pentium4-*)
basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pn)
basic_machine=pn-gould
;;
power) basic_machine=power-ibm
;;
ppc | ppcbe) basic_machine=powerpc-unknown
;;
ppc-* | ppcbe-*)
basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppcle | powerpclittle | ppc-le | powerpc-little)
basic_machine=powerpcle-unknown
;;
ppcle-* | powerpclittle-*)
basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppc64) basic_machine=powerpc64-unknown
;;
ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppc64le | powerpc64little | ppc64-le | powerpc64-little)
basic_machine=powerpc64le-unknown
;;
ppc64le-* | powerpc64little-*)
basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ps2)
basic_machine=i386-ibm
;;
pw32)
basic_machine=i586-unknown
os=-pw32
;;
rdos | rdos64)
basic_machine=x86_64-pc
os=-rdos
;;
rdos32)
basic_machine=i386-pc
os=-rdos
;;
rom68k)
basic_machine=m68k-rom68k
os=-coff
;;
rm[46]00)
basic_machine=mips-siemens
;;
rtpc | rtpc-*)
basic_machine=romp-ibm
;;
s390 | s390-*)
basic_machine=s390-ibm
;;
s390x | s390x-*)
basic_machine=s390x-ibm
;;
sa29200)
basic_machine=a29k-amd
os=-udi
;;
sb1)
basic_machine=mipsisa64sb1-unknown
;;
sb1el)
basic_machine=mipsisa64sb1el-unknown
;;
sde)
basic_machine=mipsisa32-sde
os=-elf
;;
sei)
basic_machine=mips-sei
os=-seiux
;;
sequent)
basic_machine=i386-sequent
;;
sh)
basic_machine=sh-hitachi
os=-hms
;;
sh5el)
basic_machine=sh5le-unknown
;;
sh64)
basic_machine=sh64-unknown
;;
sparclite-wrs | simso-wrs)
basic_machine=sparclite-wrs
os=-vxworks
;;
sps7)
basic_machine=m68k-bull
os=-sysv2
;;
spur)
basic_machine=spur-unknown
;;
st2000)
basic_machine=m68k-tandem
;;
stratus)
basic_machine=i860-stratus
os=-sysv4
;;
strongarm-* | thumb-*)
basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
sun2)
basic_machine=m68000-sun
;;
sun2os3)
basic_machine=m68000-sun
os=-sunos3
;;
sun2os4)
basic_machine=m68000-sun
os=-sunos4
;;
sun3os3)
basic_machine=m68k-sun
os=-sunos3
;;
sun3os4)
basic_machine=m68k-sun
os=-sunos4
;;
sun4os3)
basic_machine=sparc-sun
os=-sunos3
;;
sun4os4)
basic_machine=sparc-sun
os=-sunos4
;;
sun4sol2)
basic_machine=sparc-sun
os=-solaris2
;;
sun3 | sun3-*)
basic_machine=m68k-sun
;;
sun4)
basic_machine=sparc-sun
;;
sun386 | sun386i | roadrunner)
basic_machine=i386-sun
;;
sv1)
basic_machine=sv1-cray
os=-unicos
;;
symmetry)
basic_machine=i386-sequent
os=-dynix
;;
t3e)
basic_machine=alphaev5-cray
os=-unicos
;;
t90)
basic_machine=t90-cray
os=-unicos
;;
tile*)
basic_machine=$basic_machine-unknown
os=-linux-gnu
;;
tx39)
basic_machine=mipstx39-unknown
;;
tx39el)
basic_machine=mipstx39el-unknown
;;
toad1)
basic_machine=pdp10-xkl
os=-tops20
;;
tower | tower-32)
basic_machine=m68k-ncr
;;
tpf)
basic_machine=s390x-ibm
os=-tpf
;;
udi29k)
basic_machine=a29k-amd
os=-udi
;;
ultra3)
basic_machine=a29k-nyu
os=-sym1
;;
v810 | necv810)
basic_machine=v810-nec
os=-none
;;
vaxv)
basic_machine=vax-dec
os=-sysv
;;
vms)
basic_machine=vax-dec
os=-vms
;;
vpp*|vx|vx-*)
basic_machine=f301-fujitsu
;;
vxworks960)
basic_machine=i960-wrs
os=-vxworks
;;
vxworks68)
basic_machine=m68k-wrs
os=-vxworks
;;
vxworks29k)
basic_machine=a29k-wrs
os=-vxworks
;;
w65*)
basic_machine=w65-wdc
os=-none
;;
w89k-*)
basic_machine=hppa1.1-winbond
os=-proelf
;;
xbox)
basic_machine=i686-pc
os=-mingw32
;;
xps | xps100)
basic_machine=xps100-honeywell
;;
xscale-* | xscalee[bl]-*)
basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
;;
ymp)
basic_machine=ymp-cray
os=-unicos
;;
z8k-*-coff)
basic_machine=z8k-unknown
os=-sim
;;
z80-*-coff)
basic_machine=z80-unknown
os=-sim
;;
none)
basic_machine=none-none
os=-none
;;
# Here we handle the default manufacturer of certain CPU types. It is in
# some cases the only manufacturer, in others, it is the most popular.
w89k)
basic_machine=hppa1.1-winbond
;;
op50n)
basic_machine=hppa1.1-oki
;;
op60c)
basic_machine=hppa1.1-oki
;;
romp)
basic_machine=romp-ibm
;;
mmix)
basic_machine=mmix-knuth
;;
rs6000)
basic_machine=rs6000-ibm
;;
vax)
basic_machine=vax-dec
;;
pdp10)
# there are many clones, so DEC is not a safe bet
basic_machine=pdp10-unknown
;;
pdp11)
basic_machine=pdp11-dec
;;
we32k)
basic_machine=we32k-att
;;
sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
basic_machine=sh-unknown
;;
sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
basic_machine=sparc-sun
;;
cydra)
basic_machine=cydra-cydrome
;;
orion)
basic_machine=orion-highlevel
;;
orion105)
basic_machine=clipper-highlevel
;;
mac | mpw | mac-mpw)
basic_machine=m68k-apple
;;
pmac | pmac-mpw)
basic_machine=powerpc-apple
;;
*-unknown)
# Make sure to match an already-canonicalized machine name.
;;
*)
echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
exit 1
;;
esac
# Here we canonicalize certain aliases for manufacturers.
case $basic_machine in
*-digital*)
basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
;;
*-commodore*)
basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
;;
*)
;;
esac
# Decode manufacturer-specific aliases for certain operating systems.
if [ x"$os" != x"" ]
then
case $os in
# First match some system type aliases
# that might get confused with valid system types.
# -solaris* is a basic system type, with this one exception.
-auroraux)
os=-auroraux
;;
-solaris1 | -solaris1.*)
os=`echo $os | sed -e 's|solaris1|sunos4|'`
;;
-solaris)
os=-solaris2
;;
-svr4*)
os=-sysv4
;;
-unixware*)
os=-sysv4.2uw
;;
-gnu/linux*)
os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
;;
# First accept the basic system types.
# The portable systems comes first.
# Each alternative MUST END IN A *, to match a version number.
# -sysv* is not here because it comes later, after sysvr4.
-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
| -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
| -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
| -sym* | -kopensolaris* | -plan9* \
| -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
| -aos* | -aros* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
| -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
| -bitrig* | -openbsd* | -solidbsd* \
| -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
| -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
| -chorusos* | -chorusrdb* | -cegcc* \
| -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
| -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
| -linux-newlib* | -linux-musl* | -linux-uclibc* \
| -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
| -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
| -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
| -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
case $basic_machine in
x86-* | i*86-*)
;;
*)
os=-nto$os
;;
esac
;;
-nto-qnx*)
;;
-nto*)
os=`echo $os | sed -e 's|nto|nto-qnx|'`
;;
-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
| -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
| -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
;;
-mac*)
os=`echo $os | sed -e 's|mac|macos|'`
;;
-linux-dietlibc)
os=-linux-dietlibc
;;
-linux*)
os=`echo $os | sed -e 's|linux|linux-gnu|'`
;;
-sunos5*)
os=`echo $os | sed -e 's|sunos5|solaris2|'`
;;
-sunos6*)
os=`echo $os | sed -e 's|sunos6|solaris3|'`
;;
-opened*)
os=-openedition
;;
-os400*)
os=-os400
;;
-wince*)
os=-wince
;;
-osfrose*)
os=-osfrose
;;
-osf*)
os=-osf
;;
-utek*)
os=-bsd
;;
-dynix*)
os=-bsd
;;
-acis*)
os=-aos
;;
-atheos*)
os=-atheos
;;
-syllable*)
os=-syllable
;;
-386bsd)
os=-bsd
;;
-ctix* | -uts*)
os=-sysv
;;
-nova*)
os=-rtmk-nova
;;
-ns2 )
os=-nextstep2
;;
-nsk*)
os=-nsk
;;
# Preserve the version number of sinix5.
-sinix5.*)
os=`echo $os | sed -e 's|sinix|sysv|'`
;;
-sinix*)
os=-sysv4
;;
-tpf*)
os=-tpf
;;
-triton*)
os=-sysv3
;;
-oss*)
os=-sysv3
;;
-svr4)
os=-sysv4
;;
-svr3)
os=-sysv3
;;
-sysvr4)
os=-sysv4
;;
# This must come after -sysvr4.
-sysv*)
;;
-ose*)
os=-ose
;;
-es1800*)
os=-ose
;;
-xenix)
os=-xenix
;;
-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
os=-mint
;;
-aros*)
os=-aros
;;
-zvmoe)
os=-zvmoe
;;
-dicos*)
os=-dicos
;;
-nacl*)
;;
-none)
;;
*)
# Get rid of the `-' at the beginning of $os.
os=`echo $os | sed 's/[^-]*-//'`
echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
exit 1
;;
esac
else
# Here we handle the default operating systems that come with various machines.
# The value should be what the vendor currently ships out the door with their
# machine or put another way, the most popular os provided with the machine.
# Note that if you're going to try to match "-MANUFACTURER" here (say,
# "-sun"), then you have to tell the case statement up towards the top
# that MANUFACTURER isn't an operating system. Otherwise, code above
# will signal an error saying that MANUFACTURER isn't an operating
# system, and we'll never get to this point.
case $basic_machine in
score-*)
os=-elf
;;
spu-*)
os=-elf
;;
*-acorn)
os=-riscix1.2
;;
arm*-rebel)
os=-linux
;;
arm*-semi)
os=-aout
;;
c4x-* | tic4x-*)
os=-coff
;;
c8051-*)
os=-elf
;;
hexagon-*)
os=-elf
;;
tic54x-*)
os=-coff
;;
tic55x-*)
os=-coff
;;
tic6x-*)
os=-coff
;;
# This must come before the *-dec entry.
pdp10-*)
os=-tops20
;;
pdp11-*)
os=-none
;;
*-dec | vax-*)
os=-ultrix4.2
;;
m68*-apollo)
os=-domain
;;
i386-sun)
os=-sunos4.0.2
;;
m68000-sun)
os=-sunos3
;;
m68*-cisco)
os=-aout
;;
mep-*)
os=-elf
;;
mips*-cisco)
os=-elf
;;
mips*-*)
os=-elf
;;
or32-*)
os=-coff
;;
*-tti) # must be before sparc entry or we get the wrong os.
os=-sysv3
;;
sparc-* | *-sun)
os=-sunos4.1.1
;;
*-be)
os=-beos
;;
*-haiku)
os=-haiku
;;
*-ibm)
os=-aix
;;
*-knuth)
os=-mmixware
;;
*-wec)
os=-proelf
;;
*-winbond)
os=-proelf
;;
*-oki)
os=-proelf
;;
*-hp)
os=-hpux
;;
*-hitachi)
os=-hiux
;;
i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
os=-sysv
;;
*-cbm)
os=-amigaos
;;
*-dg)
os=-dgux
;;
*-dolphin)
os=-sysv3
;;
m68k-ccur)
os=-rtu
;;
m88k-omron*)
os=-luna
;;
*-next )
os=-nextstep
;;
*-sequent)
os=-ptx
;;
*-crds)
os=-unos
;;
*-ns)
os=-genix
;;
i370-*)
os=-mvs
;;
*-next)
os=-nextstep3
;;
*-gould)
os=-sysv
;;
*-highlevel)
os=-bsd
;;
*-encore)
os=-bsd
;;
*-sgi)
os=-irix
;;
*-siemens)
os=-sysv4
;;
*-masscomp)
os=-rtu
;;
f30[01]-fujitsu | f700-fujitsu)
os=-uxpv
;;
*-rom68k)
os=-coff
;;
*-*bug)
os=-coff
;;
*-apple)
os=-macos
;;
*-atari*)
os=-mint
;;
*)
os=-none
;;
esac
fi
# Here we handle the case where we know the os, and the CPU type, but not the
# manufacturer. We pick the logical manufacturer.
vendor=unknown
case $basic_machine in
*-unknown)
case $os in
-riscix*)
vendor=acorn
;;
-sunos*)
vendor=sun
;;
-cnk*|-aix*)
vendor=ibm
;;
-beos*)
vendor=be
;;
-hpux*)
vendor=hp
;;
-mpeix*)
vendor=hp
;;
-hiux*)
vendor=hitachi
;;
-unos*)
vendor=crds
;;
-dgux*)
vendor=dg
;;
-luna*)
vendor=omron
;;
-genix*)
vendor=ns
;;
-mvs* | -opened*)
vendor=ibm
;;
-os400*)
vendor=ibm
;;
-ptx*)
vendor=sequent
;;
-tpf*)
vendor=ibm
;;
-vxsim* | -vxworks* | -windiss*)
vendor=wrs
;;
-aux*)
vendor=apple
;;
-hms*)
vendor=hitachi
;;
-mpw* | -macos*)
vendor=apple
;;
-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
vendor=atari
;;
-vos*)
vendor=stratus
;;
esac
basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
;;
esac
echo $basic_machine$os
exit
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "timestamp='"
# time-stamp-format: "%:y-%02m-%02d"
# time-stamp-end: "'"
# End:
xf86-video-neomagic-1.2.9/configure 0000755 0001750 0001750 00002233131 12523103230 014026 0000000 0000000 #! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.69 for xf86-video-neomagic 1.2.9.
#
# Report bugs to .
#
#
# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
#
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
## -------------------- ##
## M4sh Initialization. ##
## -------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
case `(set -o) 2>/dev/null` in #(
*posix*) :
set -o posix ;; #(
*) :
;;
esac
fi
as_nl='
'
export as_nl
# Printing a long string crashes Solaris 7 /usr/bin/printf.
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
# Prefer a ksh shell builtin over an external printf program on Solaris,
# but without wasting forks for bash or zsh.
if test -z "$BASH_VERSION$ZSH_VERSION" \
&& (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='print -r --'
as_echo_n='print -rn --'
elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='printf %s\n'
as_echo_n='printf %s'
else
if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
as_echo_n='/usr/ucb/echo -n'
else
as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
as_echo_n_body='eval
arg=$1;
case $arg in #(
*"$as_nl"*)
expr "X$arg" : "X\\(.*\\)$as_nl";
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
esac;
expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
'
export as_echo_n_body
as_echo_n='sh -c $as_echo_n_body as_echo'
fi
export as_echo_body
as_echo='sh -c $as_echo_body as_echo'
fi
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
PATH_SEPARATOR=:
(PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
(PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
PATH_SEPARATOR=';'
}
fi
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
as_myself=
case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done
IFS=$as_save_IFS
;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
as_myself=$0
fi
if test ! -f "$as_myself"; then
$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
exit 1
fi
# Unset variables that we do not need and which cause bugs (e.g. in
# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
# suppresses any "Segmentation fault" message there. '((' could
# trigger a bug in pdksh 5.2.14.
for as_var in BASH_ENV ENV MAIL MAILPATH
do eval test x\${$as_var+set} = xset \
&& ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
PS4='+ '
# NLS nuisances.
LC_ALL=C
export LC_ALL
LANGUAGE=C
export LANGUAGE
# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
# Use a proper internal environment variable to ensure we don't fall
# into an infinite loop, continuously re-executing ourselves.
if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
_as_can_reexec=no; export _as_can_reexec;
# We cannot yet assume a decent shell, so we have to provide a
# neutralization value for shells without unset; and this also
# works around shells that cannot unset nonexistent variables.
# Preserve -v and -x to the replacement shell.
BASH_ENV=/dev/null
ENV=/dev/null
(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
case $- in # ((((
*v*x* | *x*v* ) as_opts=-vx ;;
*v* ) as_opts=-v ;;
*x* ) as_opts=-x ;;
* ) as_opts= ;;
esac
exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
# Admittedly, this is quite paranoid, since all the known shells bail
# out after a failed `exec'.
$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
as_fn_exit 255
fi
# We don't want this to propagate to other subprocesses.
{ _as_can_reexec=; unset _as_can_reexec;}
if test "x$CONFIG_SHELL" = x; then
as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
# is contrary to our usage. Disable this feature.
alias -g '\${1+\"\$@\"}'='\"\$@\"'
setopt NO_GLOB_SUBST
else
case \`(set -o) 2>/dev/null\` in #(
*posix*) :
set -o posix ;; #(
*) :
;;
esac
fi
"
as_required="as_fn_return () { (exit \$1); }
as_fn_success () { as_fn_return 0; }
as_fn_failure () { as_fn_return 1; }
as_fn_ret_success () { return 0; }
as_fn_ret_failure () { return 1; }
exitcode=0
as_fn_success || { exitcode=1; echo as_fn_success failed.; }
as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
else
exitcode=1; echo positional parameters were not saved.
fi
test x\$exitcode = x0 || exit 1
test -x / || exit 1"
as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
test \$(( 1 + 1 )) = 2 || exit 1
test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
PATH=/empty FPATH=/empty; export PATH FPATH
test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
|| test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1"
if (eval "$as_required") 2>/dev/null; then :
as_have_required=yes
else
as_have_required=no
fi
if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
as_found=false
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
as_found=:
case $as_dir in #(
/*)
for as_base in sh bash ksh sh5; do
# Try only shells that exist, to save several forks.
as_shell=$as_dir/$as_base
if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
{ $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
CONFIG_SHELL=$as_shell as_have_required=yes
if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
break 2
fi
fi
done;;
esac
as_found=false
done
$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
{ $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
CONFIG_SHELL=$SHELL as_have_required=yes
fi; }
IFS=$as_save_IFS
if test "x$CONFIG_SHELL" != x; then :
export CONFIG_SHELL
# We cannot yet assume a decent shell, so we have to provide a
# neutralization value for shells without unset; and this also
# works around shells that cannot unset nonexistent variables.
# Preserve -v and -x to the replacement shell.
BASH_ENV=/dev/null
ENV=/dev/null
(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
case $- in # ((((
*v*x* | *x*v* ) as_opts=-vx ;;
*v* ) as_opts=-v ;;
*x* ) as_opts=-x ;;
* ) as_opts= ;;
esac
exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
# Admittedly, this is quite paranoid, since all the known shells bail
# out after a failed `exec'.
$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
exit 255
fi
if test x$as_have_required = xno; then :
$as_echo "$0: This script requires a shell more modern than all"
$as_echo "$0: the shells that I found on your system."
if test x${ZSH_VERSION+set} = xset ; then
$as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
$as_echo "$0: be upgraded to zsh 4.3.4 or later."
else
$as_echo "$0: Please tell bug-autoconf@gnu.org and
$0: https://bugs.freedesktop.org/enter_bug.cgi?product=xorg&component=Driver/Neomagic
$0: about your system, including any error possibly output
$0: before this message. Then install a modern shell, or
$0: manually run the script under such a shell if you do
$0: have one."
fi
exit 1
fi
fi
fi
SHELL=${CONFIG_SHELL-/bin/sh}
export SHELL
# Unset more variables known to interfere with behavior of common tools.
CLICOLOR_FORCE= GREP_OPTIONS=
unset CLICOLOR_FORCE GREP_OPTIONS
## --------------------- ##
## M4sh Shell Functions. ##
## --------------------- ##
# as_fn_unset VAR
# ---------------
# Portably unset VAR.
as_fn_unset ()
{
{ eval $1=; unset $1;}
}
as_unset=as_fn_unset
# as_fn_set_status STATUS
# -----------------------
# Set $? to STATUS, without forking.
as_fn_set_status ()
{
return $1
} # as_fn_set_status
# as_fn_exit STATUS
# -----------------
# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
as_fn_exit ()
{
set +e
as_fn_set_status $1
exit $1
} # as_fn_exit
# as_fn_mkdir_p
# -------------
# Create "$as_dir" as a directory, including parents if necessary.
as_fn_mkdir_p ()
{
case $as_dir in #(
-*) as_dir=./$as_dir;;
esac
test -d "$as_dir" || eval $as_mkdir_p || {
as_dirs=
while :; do
case $as_dir in #(
*\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
*) as_qdir=$as_dir;;
esac
as_dirs="'$as_qdir' $as_dirs"
as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
} || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
} # as_fn_mkdir_p
# as_fn_executable_p FILE
# -----------------------
# Test if FILE is an executable regular file.
as_fn_executable_p ()
{
test -f "$1" && test -x "$1"
} # as_fn_executable_p
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
# advantage of any shell optimizations that allow amortized linear growth over
# repeated appends, instead of the typical quadratic growth present in naive
# implementations.
if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
eval 'as_fn_append ()
{
eval $1+=\$2
}'
else
as_fn_append ()
{
eval $1=\$$1\$2
}
fi # as_fn_append
# as_fn_arith ARG...
# ------------------
# Perform arithmetic evaluation on the ARGs, and store the result in the
# global $as_val. Take advantage of shells that can avoid forks. The arguments
# must be portable across $(()) and expr.
if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
eval 'as_fn_arith ()
{
as_val=$(( $* ))
}'
else
as_fn_arith ()
{
as_val=`expr "$@" || test $? -eq 1`
}
fi # as_fn_arith
# as_fn_error STATUS ERROR [LINENO LOG_FD]
# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
as_status=$1; test $as_status -eq 0 && as_status=1
if test "$4"; then
as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
$as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
fi
$as_echo "$as_me: error: $2" >&2
as_fn_exit $as_status
} # as_fn_error
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
fi
if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
as_dirname=dirname
else
as_dirname=false
fi
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
}
/^X\/\(\/\/\)$/{
s//\1/
q
}
/^X\/\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
as_lineno_1=$LINENO as_lineno_1a=$LINENO
as_lineno_2=$LINENO as_lineno_2a=$LINENO
eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
# Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
sed -n '
p
/[$]LINENO/=
' <$as_myself |
sed '
s/[$]LINENO.*/&-/
t lineno
b
:lineno
N
:loop
s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
t loop
s/-\n.*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
{ $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
# If we had to re-execute with $CONFIG_SHELL, we're ensured to have
# already done that, so ensure we don't try to do so again and fall
# in an infinite loop. This has already happened in practice.
_as_can_reexec=no; export _as_can_reexec
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensitive to this).
. "./$as_me.lineno"
# Exit status is that of the last command.
exit
}
ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in #(((((
-n*)
case `echo 'xy\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
xy) ECHO_C='\c';;
*) echo `echo ksh88 bug on AIX 6.1` > /dev/null
ECHO_T=' ';;
esac;;
*)
ECHO_N='-n';;
esac
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
mkdir conf$$.dir 2>/dev/null
fi
if (echo >conf$$.file) 2>/dev/null; then
if ln -s conf$$.file conf$$ 2>/dev/null; then
as_ln_s='ln -s'
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
# In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -pR'
fi
else
as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
as_mkdir_p='mkdir -p "$as_dir"'
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
as_test_x='test -x'
as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
SHELL=${CONFIG_SHELL-/bin/sh}
test -n "$DJDIR" || exec 7<&0 &1
# Name of the host.
# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
#
# Initializations.
#
ac_default_prefix=/usr/local
ac_clean_files=
ac_config_libobj_dir=.
LIBOBJS=
cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=
# Identity of this package.
PACKAGE_NAME='xf86-video-neomagic'
PACKAGE_TARNAME='xf86-video-neomagic'
PACKAGE_VERSION='1.2.9'
PACKAGE_STRING='xf86-video-neomagic 1.2.9'
PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg&component=Driver/Neomagic'
PACKAGE_URL=''
ac_unique_file="Makefile.am"
# Factoring default headers for most tests.
ac_includes_default="\
#include
#ifdef HAVE_SYS_TYPES_H
# include
#endif
#ifdef HAVE_SYS_STAT_H
# include
#endif
#ifdef STDC_HEADERS
# include
# include
#else
# ifdef HAVE_STDLIB_H
# include
# endif
#endif
#ifdef HAVE_STRING_H
# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
# include
# endif
# include
#endif
#ifdef HAVE_STRINGS_H
# include
#endif
#ifdef HAVE_INTTYPES_H
# include
#endif
#ifdef HAVE_STDINT_H
# include
#endif
#ifdef HAVE_UNISTD_H
# include
#endif"
ac_subst_vars='am__EXEEXT_FALSE
am__EXEEXT_TRUE
LTLIBOBJS
LIBOBJS
DRIVER_NAME
moduledir
XSERVER_LIBPCIACCESS_FALSE
XSERVER_LIBPCIACCESS_TRUE
PCIACCESS_LIBS
PCIACCESS_CFLAGS
XAA_FALSE
XAA_TRUE
XORG_LIBS
XORG_CFLAGS
OTOOL64
OTOOL
LIPO
NMEDIT
DSYMUTIL
MANIFEST_TOOL
RANLIB
ac_ct_AR
AR
DLLTOOL
OBJDUMP
LN_S
NM
ac_ct_DUMPBIN
DUMPBIN
LD
FGREP
LIBTOOL
MAN_SUBSTS
XORG_MAN_PAGE
ADMIN_MAN_DIR
DRIVER_MAN_DIR
MISC_MAN_DIR
FILE_MAN_DIR
LIB_MAN_DIR
APP_MAN_DIR
ADMIN_MAN_SUFFIX
DRIVER_MAN_SUFFIX
MISC_MAN_SUFFIX
FILE_MAN_SUFFIX
LIB_MAN_SUFFIX
APP_MAN_SUFFIX
SED
host_os
host_vendor
host_cpu
host
build_os
build_vendor
build_cpu
build
INSTALL_CMD
PKG_CONFIG_LIBDIR
PKG_CONFIG_PATH
PKG_CONFIG
CHANGELOG_CMD
STRICT_CFLAGS
CWARNFLAGS
BASE_CFLAGS
EGREP
GREP
CPP
am__fastdepCC_FALSE
am__fastdepCC_TRUE
CCDEPMODE
am__nodep
AMDEPBACKSLASH
AMDEP_FALSE
AMDEP_TRUE
am__quote
am__include
DEPDIR
OBJEXT
EXEEXT
ac_ct_CC
CPPFLAGS
LDFLAGS
CFLAGS
CC
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
AM_BACKSLASH
AM_DEFAULT_VERBOSITY
AM_DEFAULT_V
AM_V
am__untar
am__tar
AMTAR
am__leading_dot
SET_MAKE
AWK
mkdir_p
MKDIR_P
INSTALL_STRIP_PROGRAM
STRIP
install_sh
MAKEINFO
AUTOHEADER
AUTOMAKE
AUTOCONF
ACLOCAL
VERSION
PACKAGE
CYGPATH_W
am__isrc
INSTALL_DATA
INSTALL_SCRIPT
INSTALL_PROGRAM
target_alias
host_alias
build_alias
LIBS
ECHO_T
ECHO_N
ECHO_C
DEFS
mandir
localedir
libdir
psdir
pdfdir
dvidir
htmldir
infodir
docdir
oldincludedir
includedir
localstatedir
sharedstatedir
sysconfdir
datadir
datarootdir
libexecdir
sbindir
bindir
program_transform_name
prefix
exec_prefix
PACKAGE_URL
PACKAGE_BUGREPORT
PACKAGE_STRING
PACKAGE_VERSION
PACKAGE_TARNAME
PACKAGE_NAME
PATH_SEPARATOR
SHELL'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_silent_rules
enable_maintainer_mode
enable_dependency_tracking
enable_selective_werror
enable_strict_compilation
enable_static
enable_shared
with_pic
enable_fast_install
with_gnu_ld
with_sysroot
enable_libtool_lock
with_xorg_module_dir
enable_xaa
'
ac_precious_vars='build_alias
host_alias
target_alias
CC
CFLAGS
LDFLAGS
LIBS
CPPFLAGS
CPP
PKG_CONFIG
PKG_CONFIG_PATH
PKG_CONFIG_LIBDIR
XORG_CFLAGS
XORG_LIBS
PCIACCESS_CFLAGS
PCIACCESS_LIBS'
# Initialize some variables set by options.
ac_init_help=
ac_init_version=false
ac_unrecognized_opts=
ac_unrecognized_sep=
# The variables have the same names as the options, with
# dashes changed to underlines.
cache_file=/dev/null
exec_prefix=NONE
no_create=
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
verbose=
x_includes=NONE
x_libraries=NONE
# Installation directory options.
# These are left unexpanded so users can "make install exec_prefix=/foo"
# and all the variables that are supposed to be based on exec_prefix
# by default will actually change.
# Use braces instead of parens because sh, perl, etc. also accept them.
# (The list follows the same order as the GNU Coding Standards.)
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datarootdir='${prefix}/share'
datadir='${datarootdir}'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
includedir='${prefix}/include'
oldincludedir='/usr/include'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
infodir='${datarootdir}/info'
htmldir='${docdir}'
dvidir='${docdir}'
pdfdir='${docdir}'
psdir='${docdir}'
libdir='${exec_prefix}/lib'
localedir='${datarootdir}/locale'
mandir='${datarootdir}/man'
ac_prev=
ac_dashdash=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval $ac_prev=\$ac_option
ac_prev=
continue
fi
case $ac_option in
*=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
*=) ac_optarg= ;;
*) ac_optarg=yes ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
case $ac_dashdash$ac_option in
--)
ac_dashdash=yes ;;
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
bindir=$ac_optarg ;;
-build | --build | --buil | --bui | --bu)
ac_prev=build_alias ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
build_alias=$ac_optarg ;;
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
cache_file=$ac_optarg ;;
--config-cache | -C)
cache_file=config.cache ;;
-datadir | --datadir | --datadi | --datad)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=*)
datadir=$ac_optarg ;;
-datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
| --dataroo | --dataro | --datar)
ac_prev=datarootdir ;;
-datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
| --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
datarootdir=$ac_optarg ;;
-disable-* | --disable-*)
ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
as_fn_error $? "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
*"
"enable_$ac_useropt"
"*) ;;
*) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
ac_unrecognized_sep=', ';;
esac
eval enable_$ac_useropt=no ;;
-docdir | --docdir | --docdi | --doc | --do)
ac_prev=docdir ;;
-docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
docdir=$ac_optarg ;;
-dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
ac_prev=dvidir ;;
-dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
dvidir=$ac_optarg ;;
-enable-* | --enable-*)
ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
as_fn_error $? "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
*"
"enable_$ac_useropt"
"*) ;;
*) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
ac_unrecognized_sep=', ';;
esac
eval enable_$ac_useropt=\$ac_optarg ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
| --exec | --exe | --ex)
ac_prev=exec_prefix ;;
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
exec_prefix=$ac_optarg ;;
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
-help | --help | --hel | --he | -h)
ac_init_help=long ;;
-help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
ac_init_help=recursive ;;
-help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
ac_init_help=short ;;
-host | --host | --hos | --ho)
ac_prev=host_alias ;;
-host=* | --host=* | --hos=* | --ho=*)
host_alias=$ac_optarg ;;
-htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
ac_prev=htmldir ;;
-htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
| --ht=*)
htmldir=$ac_optarg ;;
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
includedir=$ac_optarg ;;
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
infodir=$ac_optarg ;;
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
libdir=$ac_optarg ;;
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
libexecdir=$ac_optarg ;;
-localedir | --localedir | --localedi | --localed | --locale)
ac_prev=localedir ;;
-localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
localedir=$ac_optarg ;;
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst | --locals)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
localstatedir=$ac_optarg ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
mandir=$ac_optarg ;;
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c | -n)
no_create=yes ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
no_recursion=yes ;;
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
| --oldin | --oldi | --old | --ol | --o)
ac_prev=oldincludedir ;;
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
oldincludedir=$ac_optarg ;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix=$ac_optarg ;;
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
program_prefix=$ac_optarg ;;
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
program_suffix=$ac_optarg ;;
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transform-n | --program-transform- \
| --program-transform | --program-transfor \
| --program-transfo | --program-transf \
| --program-trans | --program-tran \
| --progr-tra | --program-tr | --program-t)
ac_prev=program_transform_name ;;
-program-transform-name=* | --program-transform-name=* \
| --program-transform-nam=* | --program-transform-na=* \
| --program-transform-n=* | --program-transform-=* \
| --program-transform=* | --program-transfor=* \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name=$ac_optarg ;;
-pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
ac_prev=pdfdir ;;
-pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
pdfdir=$ac_optarg ;;
-psdir | --psdir | --psdi | --psd | --ps)
ac_prev=psdir ;;
-psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
psdir=$ac_optarg ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
sbindir=$ac_optarg ;;
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedst | --shareds | --shared | --share | --shar \
| --sha | --sh)
ac_prev=sharedstatedir ;;
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
sharedstatedir=$ac_optarg ;;
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
site=$ac_optarg ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir=$ac_optarg ;;
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
sysconfdir=$ac_optarg ;;
-target | --target | --targe | --targ | --tar | --ta | --t)
ac_prev=target_alias ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
target_alias=$ac_optarg ;;
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
-version | --version | --versio | --versi | --vers | -V)
ac_init_version=: ;;
-with-* | --with-*)
ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
as_fn_error $? "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
*"
"with_$ac_useropt"
"*) ;;
*) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
ac_unrecognized_sep=', ';;
esac
eval with_$ac_useropt=\$ac_optarg ;;
-without-* | --without-*)
ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
as_fn_error $? "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
*"
"with_$ac_useropt"
"*) ;;
*) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
ac_unrecognized_sep=', ';;
esac
eval with_$ac_useropt=no ;;
--x)
# Obsolete; use --with-x.
with_x=yes ;;
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
| --x-incl | --x-inc | --x-in | --x-i)
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
x_includes=$ac_optarg ;;
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
-*) as_fn_error $? "unrecognized option: \`$ac_option'
Try \`$0 --help' for more information"
;;
*=*)
ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
# Reject names that are not valid shell variable names.
case $ac_envvar in #(
'' | [0-9]* | *[!_$as_cr_alnum]* )
as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
esac
eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
*)
# FIXME: should be removed in autoconf 3.0.
$as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
$as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
: "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
;;
esac
done
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
as_fn_error $? "missing argument to $ac_option"
fi
if test -n "$ac_unrecognized_opts"; then
case $enable_option_checking in
no) ;;
fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
*) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
esac
fi
# Check all directory arguments for consistency.
for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
datadir sysconfdir sharedstatedir localstatedir includedir \
oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
libdir localedir mandir
do
eval ac_val=\$$ac_var
# Remove trailing slashes.
case $ac_val in
*/ )
ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
eval $ac_var=\$ac_val;;
esac
# Be sure to have absolute directory names.
case $ac_val in
[\\/$]* | ?:[\\/]* ) continue;;
NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
done
# There might be people who depend on the old broken behavior: `$host'
# used to hold the argument of --host etc.
# FIXME: To remove some day.
build=$build_alias
host=$host_alias
target=$target_alias
# FIXME: To remove some day.
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
fi
ac_tool_prefix=
test -n "$host_alias" && ac_tool_prefix=$host_alias-
test "$silent" = yes && exec 6>/dev/null
ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
as_fn_error $? "working directory cannot be determined"
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
as_fn_error $? "pwd does not report name of working directory"
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then the parent directory.
ac_confdir=`$as_dirname -- "$as_myself" ||
$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_myself" : 'X\(//\)[^/]' \| \
X"$as_myself" : 'X\(//\)$' \| \
X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$as_myself" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
srcdir=$ac_confdir
if test ! -r "$srcdir/$ac_unique_file"; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
if test ! -r "$srcdir/$ac_unique_file"; then
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
srcdir=.
fi
# Remove unnecessary trailing slashes from srcdir.
# Double slashes in file names in object file debugging info
# mess up M-x gdb in Emacs.
case $srcdir in
*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
esac
for ac_var in $ac_precious_vars; do
eval ac_env_${ac_var}_set=\${${ac_var}+set}
eval ac_env_${ac_var}_value=\$${ac_var}
eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
eval ac_cv_env_${ac_var}_value=\$${ac_var}
done
#
# Report the --help message.
#
if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
\`configure' configures xf86-video-neomagic 1.2.9 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.
Defaults for the options are specified in brackets.
Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print \`checking ...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for \`--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or \`..']
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]
By default, \`make install' will install all the files in
\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
an installation prefix other than \`$ac_default_prefix' using \`--prefix',
for instance \`--prefix=\$HOME'.
For better control, use the options below.
Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
--datadir=DIR read-only architecture-independent data [DATAROOTDIR]
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
--docdir=DIR documentation root
[DATAROOTDIR/doc/xf86-video-neomagic]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
--psdir=DIR ps documentation [DOCDIR]
_ACEOF
cat <<\_ACEOF
Program names:
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM run sed PROGRAM on installed program names
System types:
--build=BUILD configure for building on BUILD [guessed]
--host=HOST cross-compile to build programs to run on HOST [BUILD]
_ACEOF
fi
if test -n "$ac_init_help"; then
case $ac_init_help in
short | recursive ) echo "Configuration of xf86-video-neomagic 1.2.9:";;
esac
cat <<\_ACEOF
Optional Features:
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-silent-rules less verbose build output (undo: "make V=1")
--disable-silent-rules verbose build output (undo: "make V=0")
--enable-maintainer-mode
enable make rules and dependencies not useful (and
sometimes confusing) to the casual installer
--enable-dependency-tracking
do not reject slow dependency extractors
--disable-dependency-tracking
speeds up one-time build
--disable-selective-werror
Turn off selective compiler errors. (default:
enabled)
--enable-strict-compilation
Enable all warnings from compiler and make them
errors (default: disabled)
--enable-static[=PKGS] build static libraries [default=no]
--enable-shared[=PKGS] build shared libraries [default=yes]
--enable-fast-install[=PKGS]
optimize for fast installation [default=yes]
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-xaa Enable legacy X Acceleration Architecture (XAA)
[default=auto]
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use
both]
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-sysroot=DIR Search for dependent libraries within DIR
(or the compiler's sysroot if not specified).
--with-xorg-module-dir=DIR
Default xorg module directory
[[default=$libdir/xorg/modules]]
Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L if you have libraries in a
nonstandard directory
LIBS libraries to pass to the linker, e.g. -l
CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if
you have headers in a nonstandard directory
CPP C preprocessor
PKG_CONFIG path to pkg-config utility
PKG_CONFIG_PATH
directories to add to pkg-config's search path
PKG_CONFIG_LIBDIR
path overriding pkg-config's built-in search path
XORG_CFLAGS C compiler flags for XORG, overriding pkg-config
XORG_LIBS linker flags for XORG, overriding pkg-config
PCIACCESS_CFLAGS
C compiler flags for PCIACCESS, overriding pkg-config
PCIACCESS_LIBS
linker flags for PCIACCESS, overriding pkg-config
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
Report bugs to .
_ACEOF
ac_status=$?
fi
if test "$ac_init_help" = "recursive"; then
# If there are subdirs, report their specific --help.
for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
test -d "$ac_dir" ||
{ cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
continue
ac_builddir=.
case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
# A ".." for each directory in $ac_dir_suffix.
ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
case $ac_top_builddir_sub in
"") ac_top_builddir_sub=. ac_top_build_prefix= ;;
*) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix
case $srcdir in
.) # We are building in place.
ac_srcdir=.
ac_top_srcdir=$ac_top_builddir_sub
ac_abs_top_srcdir=$ac_pwd ;;
[\\/]* | ?:[\\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir
ac_abs_top_srcdir=$srcdir ;;
*) # Relative name.
ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_build_prefix$srcdir
ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
cd "$ac_dir" || { ac_status=$?; continue; }
# Check for guested configure.
if test -f "$ac_srcdir/configure.gnu"; then
echo &&
$SHELL "$ac_srcdir/configure.gnu" --help=recursive
elif test -f "$ac_srcdir/configure"; then
echo &&
$SHELL "$ac_srcdir/configure" --help=recursive
else
$as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
fi || ac_status=$?
cd "$ac_pwd" || { ac_status=$?; break; }
done
fi
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
xf86-video-neomagic configure 1.2.9
generated by GNU Autoconf 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
exit
fi
## ------------------------ ##
## Autoconf initialization. ##
## ------------------------ ##
# ac_fn_c_try_compile LINENO
# --------------------------
# Try to compile conftest.$ac_ext, and return whether this succeeded.
ac_fn_c_try_compile ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
rm -f conftest.$ac_objext
if { { ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_compile") 2>conftest.err
ac_status=$?
if test -s conftest.err; then
grep -v '^ *+' conftest.err >conftest.er1
cat conftest.er1 >&5
mv -f conftest.er1 conftest.err
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then :
ac_retval=0
else
$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_retval=1
fi
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
as_fn_set_status $ac_retval
} # ac_fn_c_try_compile
# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES
# ---------------------------------------------
# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR
# accordingly.
ac_fn_c_check_decl ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
as_decl_name=`echo $2|sed 's/ *(.*//'`
as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'`
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5
$as_echo_n "checking whether $as_decl_name is declared... " >&6; }
if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
$4
int
main ()
{
#ifndef $as_decl_name
#ifdef __cplusplus
(void) $as_decl_use;
#else
(void) $as_decl_name;
#endif
#endif
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
eval "$3=yes"
else
eval "$3=no"
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
eval ac_res=\$$3
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_c_check_decl
# ac_fn_c_try_cpp LINENO
# ----------------------
# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
ac_fn_c_try_cpp ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
if { { ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
ac_status=$?
if test -s conftest.err; then
grep -v '^ *+' conftest.err >conftest.er1
cat conftest.er1 >&5
mv -f conftest.er1 conftest.err
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; } > conftest.i && {
test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
test ! -s conftest.err
}; then :
ac_retval=0
else
$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_retval=1
fi
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
as_fn_set_status $ac_retval
} # ac_fn_c_try_cpp
# ac_fn_c_try_run LINENO
# ----------------------
# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
# that executables *can* be run.
ac_fn_c_try_run ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
if { { ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_link") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
{ { case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_try") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; }; then :
ac_retval=0
else
$as_echo "$as_me: program exited with status $ac_status" >&5
$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_retval=$ac_status
fi
rm -rf conftest.dSYM conftest_ipa8_conftest.oo
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
as_fn_set_status $ac_retval
} # ac_fn_c_try_run
# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
# -------------------------------------------------------
# Tests whether HEADER exists and can be compiled using the include files in
# INCLUDES, setting the cache variable VAR accordingly.
ac_fn_c_check_header_compile ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
$4
#include <$2>
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
eval "$3=yes"
else
eval "$3=no"
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
eval ac_res=\$$3
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_c_check_header_compile
# ac_fn_c_try_link LINENO
# -----------------------
# Try to link conftest.$ac_ext, and return whether this succeeded.
ac_fn_c_try_link ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
rm -f conftest.$ac_objext conftest$ac_exeext
if { { ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_link") 2>conftest.err
ac_status=$?
if test -s conftest.err; then
grep -v '^ *+' conftest.err >conftest.er1
cat conftest.er1 >&5
mv -f conftest.er1 conftest.err
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext && {
test "$cross_compiling" = yes ||
test -x conftest$ac_exeext
}; then :
ac_retval=0
else
$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_retval=1
fi
# Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
# created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
# interfere with the next link command; also delete a directory that is
# left behind by Apple's compiler. We do this before executing the actions.
rm -rf conftest.dSYM conftest_ipa8_conftest.oo
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
as_fn_set_status $ac_retval
} # ac_fn_c_try_link
# ac_fn_c_check_func LINENO FUNC VAR
# ----------------------------------
# Tests whether FUNC exists, setting the cache variable VAR accordingly
ac_fn_c_check_func ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Define $2 to an innocuous variant, in case declares $2.
For example, HP-UX 11i declares gettimeofday. */
#define $2 innocuous_$2
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $2 (); below.
Prefer to if __STDC__ is defined, since
exists even on freestanding compilers. */
#ifdef __STDC__
# include
#else
# include
#endif
#undef $2
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char $2 ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined __stub_$2 || defined __stub___$2
choke me
#endif
int
main ()
{
return $2 ();
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval "$3=yes"
else
eval "$3=no"
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
eval ac_res=\$$3
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_c_check_func
# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
# -------------------------------------------------------
# Tests whether HEADER exists, giving a warning if it cannot be compiled using
# the include files in INCLUDES and setting the cache variable VAR
# accordingly.
ac_fn_c_check_header_mongrel ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
if eval \${$3+:} false; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
fi
eval ac_res=\$$3
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
else
# Is the header compilable?
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
$as_echo_n "checking $2 usability... " >&6; }
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
$4
#include <$2>
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
ac_header_compiler=yes
else
ac_header_compiler=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
$as_echo "$ac_header_compiler" >&6; }
# Is the header present?
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
$as_echo_n "checking $2 presence... " >&6; }
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include <$2>
_ACEOF
if ac_fn_c_try_cpp "$LINENO"; then :
ac_header_preproc=yes
else
ac_header_preproc=no
fi
rm -f conftest.err conftest.i conftest.$ac_ext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
$as_echo "$ac_header_preproc" >&6; }
# So? What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
yes:no: )
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
;;
no:yes:* )
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
( $as_echo "## ------------------------------------------------------------------------------------------------ ##
## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg&component=Driver/Neomagic ##
## ------------------------------------------------------------------------------------------------ ##"
) | sed "s/^/$as_me: WARNING: /" >&2
;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
else
eval "$3=\$ac_header_compiler"
fi
eval ac_res=\$$3
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
fi
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_c_check_header_mongrel
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by xf86-video-neomagic $as_me 1.2.9, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
_ACEOF
exec 5>>config.log
{
cat <<_ASUNAME
## --------- ##
## Platform. ##
## --------- ##
hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
uname -m = `(uname -m) 2>/dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`
/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
_ASUNAME
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
$as_echo "PATH: $as_dir"
done
IFS=$as_save_IFS
} >&5
cat >&5 <<_ACEOF
## ----------- ##
## Core tests. ##
## ----------- ##
_ACEOF
# Keep a trace of the command line.
# Strip out --no-create and --no-recursion so they do not pile up.
# Strip out --silent because we don't want to record it for future runs.
# Also quote any args containing shell meta-characters.
# Make two passes to allow for proper duplicate-argument suppression.
ac_configure_args=
ac_configure_args0=
ac_configure_args1=
ac_must_keep_next=false
for ac_pass in 1 2
do
for ac_arg
do
case $ac_arg in
-no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
continue ;;
*\'*)
ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
case $ac_pass in
1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
2)
as_fn_append ac_configure_args1 " '$ac_arg'"
if test $ac_must_keep_next = true; then
ac_must_keep_next=false # Got value, back to normal.
else
case $ac_arg in
*=* | --config-cache | -C | -disable-* | --disable-* \
| -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
| -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
| -with-* | --with-* | -without-* | --without-* | --x)
case "$ac_configure_args0 " in
"$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
esac
;;
-* ) ac_must_keep_next=true ;;
esac
fi
as_fn_append ac_configure_args " '$ac_arg'"
;;
esac
done
done
{ ac_configure_args0=; unset ac_configure_args0;}
{ ac_configure_args1=; unset ac_configure_args1;}
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log. We remove comments because anyway the quotes in there
# would cause problems or look ugly.
# WARNING: Use '\'' to represent an apostrophe within the trap.
# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
trap 'exit_status=$?
# Save into config.log some information that might help in debugging.
{
echo
$as_echo "## ---------------- ##
## Cache variables. ##
## ---------------- ##"
echo
# The following way of writing the cache mishandles newlines in values,
(
for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
eval ac_val=\$$ac_var
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
*_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
*) { eval $ac_var=; unset $ac_var;} ;;
esac ;;
esac
done
(set) 2>&1 |
case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
*${as_nl}ac_space=\ *)
sed -n \
"s/'\''/'\''\\\\'\'''\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
;; #(
*)
sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
;;
esac |
sort
)
echo
$as_echo "## ----------------- ##
## Output variables. ##
## ----------------- ##"
echo
for ac_var in $ac_subst_vars
do
eval ac_val=\$$ac_var
case $ac_val in
*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
esac
$as_echo "$ac_var='\''$ac_val'\''"
done | sort
echo
if test -n "$ac_subst_files"; then
$as_echo "## ------------------- ##
## File substitutions. ##
## ------------------- ##"
echo
for ac_var in $ac_subst_files
do
eval ac_val=\$$ac_var
case $ac_val in
*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
esac
$as_echo "$ac_var='\''$ac_val'\''"
done | sort
echo
fi
if test -s confdefs.h; then
$as_echo "## ----------- ##
## confdefs.h. ##
## ----------- ##"
echo
cat confdefs.h
echo
fi
test "$ac_signal" != 0 &&
$as_echo "$as_me: caught signal $ac_signal"
$as_echo "$as_me: exit $exit_status"
} >&5
rm -f core *.core core.conftest.* &&
rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
exit $exit_status
' 0
for ac_signal in 1 2 13 15; do
trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
done
ac_signal=0
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -f -r conftest* confdefs.h
$as_echo "/* confdefs.h */" > confdefs.h
# Predefined preprocessor variables.
cat >>confdefs.h <<_ACEOF
#define PACKAGE_NAME "$PACKAGE_NAME"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define PACKAGE_VERSION "$PACKAGE_VERSION"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define PACKAGE_STRING "$PACKAGE_STRING"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define PACKAGE_URL "$PACKAGE_URL"
_ACEOF
# Let the site file select an alternate cache file if it wants to.
# Prefer an explicitly selected file to automatically selected ones.
ac_site_file1=NONE
ac_site_file2=NONE
if test -n "$CONFIG_SITE"; then
# We do not want a PATH search for config.site.
case $CONFIG_SITE in #((
-*) ac_site_file1=./$CONFIG_SITE;;
*/*) ac_site_file1=$CONFIG_SITE;;
*) ac_site_file1=./$CONFIG_SITE;;
esac
elif test "x$prefix" != xNONE; then
ac_site_file1=$prefix/share/config.site
ac_site_file2=$prefix/etc/config.site
else
ac_site_file1=$ac_default_prefix/share/config.site
ac_site_file2=$ac_default_prefix/etc/config.site
fi
for ac_site_file in "$ac_site_file1" "$ac_site_file2"
do
test "x$ac_site_file" = xNONE && continue
if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
$as_echo "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
. "$ac_site_file" \
|| { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "failed to load site script $ac_site_file
See \`config.log' for more details" "$LINENO" 5; }
fi
done
if test -r "$cache_file"; then
# Some versions of bash will fail to source /dev/null (special files
# actually), so we avoid doing that. DJGPP emulates it as a regular file.
if test /dev/null != "$cache_file" && test -f "$cache_file"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
$as_echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
[\\/]* | ?:[\\/]* ) . "$cache_file";;
*) . "./$cache_file";;
esac
fi
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
$as_echo "$as_me: creating cache $cache_file" >&6;}
>$cache_file
fi
# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
for ac_var in $ac_precious_vars; do
eval ac_old_set=\$ac_cv_env_${ac_var}_set
eval ac_new_set=\$ac_env_${ac_var}_set
eval ac_old_val=\$ac_cv_env_${ac_var}_value
eval ac_new_val=\$ac_env_${ac_var}_value
case $ac_old_set,$ac_new_set in
set,)
{ $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
ac_cache_corrupted=: ;;
,set)
{ $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
ac_cache_corrupted=: ;;
,);;
*)
if test "x$ac_old_val" != "x$ac_new_val"; then
# differences in whitespace do not lead to failure.
ac_old_val_w=`echo x $ac_old_val`
ac_new_val_w=`echo x $ac_new_val`
if test "$ac_old_val_w" != "$ac_new_val_w"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
ac_cache_corrupted=:
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
eval $ac_var=\$ac_old_val
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
{ $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
fi;;
esac
# Pass precious variables to config.status.
if test "$ac_new_set" = set; then
case $ac_new_val in
*\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
*) ac_arg=$ac_var=$ac_new_val ;;
esac
case " $ac_configure_args " in
*" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
*) as_fn_append ac_configure_args " '$ac_arg'" ;;
esac
fi
done
if $ac_cache_corrupted; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
fi
## -------------------- ##
## Main body of script. ##
## -------------------- ##
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
ac_config_headers="$ac_config_headers config.h"
ac_aux_dir=
for ac_dir in . "$srcdir"/.; do
if test -f "$ac_dir/install-sh"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f "$ac_dir/install.sh"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
elif test -f "$ac_dir/shtool"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/shtool install -c"
break
fi
done
if test -z "$ac_aux_dir"; then
as_fn_error $? "cannot find install-sh, install.sh, or shtool in . \"$srcdir\"/." "$LINENO" 5
fi
# These three variables are undocumented and unsupported,
# and are intended to be withdrawn in a future Autoconf release.
# They can cause serious problems if a builder's source tree is in a directory
# whose full name contains unusual characters.
ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
# Initialize Automake
am__api_version='1.14'
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AmigaOS /C/install, which installs bootblocks on floppy discs
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
# Reject install programs that cannot install multiple files.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
$as_echo_n "checking for a BSD-compatible install... " >&6; }
if test -z "$INSTALL"; then
if ${ac_cv_path_install+:} false; then :
$as_echo_n "(cached) " >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
# Account for people who put trailing slashes in PATH elements.
case $as_dir/ in #((
./ | .// | /[cC]/* | \
/etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
/usr/ucb/* ) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
# Don't use installbsd from OSF since it installs stuff as root
# by default.
for ac_prog in ginstall scoinst install; do
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
if test $ac_prog = install &&
grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
:
elif test $ac_prog = install &&
grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# program-specific install script used by HP pwplus--don't use.
:
else
rm -rf conftest.one conftest.two conftest.dir
echo one > conftest.one
echo two > conftest.two
mkdir conftest.dir
if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
test -s conftest.one && test -s conftest.two &&
test -s conftest.dir/conftest.one &&
test -s conftest.dir/conftest.two
then
ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
break 3
fi
fi
fi
done
done
;;
esac
done
IFS=$as_save_IFS
rm -rf conftest.one conftest.two conftest.dir
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL=$ac_cv_path_install
else
# As a last resort, use the slow shell script. Don't cache a
# value for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the value is a relative name.
INSTALL=$ac_install_sh
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
$as_echo "$INSTALL" >&6; }
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
$as_echo_n "checking whether build environment is sane... " >&6; }
# Reject unsafe characters in $srcdir or the absolute working directory
# name. Accept space and tab only in the latter.
am_lf='
'
case `pwd` in
*[\\\"\#\$\&\'\`$am_lf]*)
as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
esac
case $srcdir in
*[\\\"\#\$\&\'\`$am_lf\ \ ]*)
as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
esac
# Do 'set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
am_has_slept=no
for am_try in 1 2; do
echo "timestamp, slept: $am_has_slept" > conftest.file
set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
if test "$*" = "X"; then
# -L didn't work.
set X `ls -t "$srcdir/configure" conftest.file`
fi
if test "$*" != "X $srcdir/configure conftest.file" \
&& test "$*" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
alias in your environment" "$LINENO" 5
fi
if test "$2" = conftest.file || test $am_try -eq 2; then
break
fi
# Just in case.
sleep 1
am_has_slept=yes
done
test "$2" = conftest.file
)
then
# Ok.
:
else
as_fn_error $? "newly created file is older than distributed files!
Check your system clock" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
# If we didn't sleep, we still need to ensure time stamps of config.status and
# generated files are strictly newer.
am_sleep_pid=
if grep 'slept: no' conftest.file >/dev/null 2>&1; then
( sleep 1 ) &
am_sleep_pid=$!
fi
rm -f conftest.file
test "$program_prefix" != NONE &&
program_transform_name="s&^&$program_prefix&;$program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
program_transform_name="s&\$&$program_suffix&;$program_transform_name"
# Double any \ or $.
# By default was `s,x,x', remove it if useless.
ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
# Expand $ac_aux_dir to an absolute path.
am_aux_dir=`cd "$ac_aux_dir" && pwd`
if test x"${MISSING+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
*)
MISSING="\${SHELL} $am_aux_dir/missing" ;;
esac
fi
# Use eval to expand $SHELL
if eval "$MISSING --is-lightweight"; then
am_missing_run="$MISSING "
else
am_missing_run=
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
fi
if test x"${install_sh}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
*)
install_sh="\${SHELL} $am_aux_dir/install-sh"
esac
fi
# Installed binaries are usually stripped using 'strip' when the user
# run "make install-strip". However 'strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the 'STRIP' environment variable to overrule this program.
if test "$cross_compiling" != no; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$STRIP"; then
ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
STRIP=$ac_cv_prog_STRIP
if test -n "$STRIP"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
$as_echo "$STRIP" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_STRIP"; then
ac_ct_STRIP=$STRIP
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_STRIP"; then
ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_STRIP="strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
if test -n "$ac_ct_STRIP"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
$as_echo "$ac_ct_STRIP" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_STRIP" = x; then
STRIP=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
STRIP=$ac_ct_STRIP
fi
else
STRIP="$ac_cv_prog_STRIP"
fi
fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
if test -z "$MKDIR_P"; then
if ${ac_cv_path_mkdir+:} false; then :
$as_echo_n "(cached) " >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_prog in mkdir gmkdir; do
for ac_exec_ext in '' $ac_executable_extensions; do
as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
'mkdir (GNU coreutils) '* | \
'mkdir (coreutils) '* | \
'mkdir (fileutils) '4.1*)
ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
break 3;;
esac
done
done
done
IFS=$as_save_IFS
fi
test -d ./--version && rmdir ./--version
if test "${ac_cv_path_mkdir+set}" = set; then
MKDIR_P="$ac_cv_path_mkdir -p"
else
# As a last resort, use the slow shell script. Don't cache a
# value for MKDIR_P within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the value is a relative name.
MKDIR_P="$ac_install_sh -d"
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
$as_echo "$MKDIR_P" >&6; }
for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_AWK+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$AWK"; then
ac_cv_prog_AWK="$AWK" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_AWK="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
AWK=$ac_cv_prog_AWK
if test -n "$AWK"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
$as_echo "$AWK" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
test -n "$AWK" && break
done
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
set x ${MAKE-make}
ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
$as_echo_n "(cached) " >&6
else
cat >conftest.make <<\_ACEOF
SHELL = /bin/sh
all:
@echo '@@@%%%=$(MAKE)=@@@%%%'
_ACEOF
# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
case `${MAKE-make} -f conftest.make 2>/dev/null` in
*@@@%%%=?*=@@@%%%*)
eval ac_cv_prog_make_${ac_make}_set=yes;;
*)
eval ac_cv_prog_make_${ac_make}_set=no;;
esac
rm -f conftest.make
fi
if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
SET_MAKE=
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
SET_MAKE="MAKE=${MAKE-make}"
fi
rm -rf .tst 2>/dev/null
mkdir .tst 2>/dev/null
if test -d .tst; then
am__leading_dot=.
else
am__leading_dot=_
fi
rmdir .tst 2>/dev/null
# Check whether --enable-silent-rules was given.
if test "${enable_silent_rules+set}" = set; then :
enableval=$enable_silent_rules;
fi
case $enable_silent_rules in # (((
yes) AM_DEFAULT_VERBOSITY=0;;
no) AM_DEFAULT_VERBOSITY=1;;
*) AM_DEFAULT_VERBOSITY=1;;
esac
am_make=${MAKE-make}
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
if ${am_cv_make_support_nested_variables+:} false; then :
$as_echo_n "(cached) " >&6
else
if $as_echo 'TRUE=$(BAR$(V))
BAR0=false
BAR1=true
V=1
am__doit:
@$(TRUE)
.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
am_cv_make_support_nested_variables=yes
else
am_cv_make_support_nested_variables=no
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
$as_echo "$am_cv_make_support_nested_variables" >&6; }
if test $am_cv_make_support_nested_variables = yes; then
AM_V='$(V)'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
else
AM_V=$AM_DEFAULT_VERBOSITY
AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
fi
AM_BACKSLASH='\'
if test "`cd $srcdir && pwd`" != "`pwd`"; then
# Use -I$(srcdir) only when $(srcdir) != ., so that make's output
# is not polluted with repeated "-I."
am__isrc=' -I$(srcdir)'
# test to see if srcdir already configured
if test -f $srcdir/config.status; then
as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
fi
fi
# test whether we have cygpath
if test -z "$CYGPATH_W"; then
if (cygpath --version) >/dev/null 2>/dev/null; then
CYGPATH_W='cygpath -w'
else
CYGPATH_W=echo
fi
fi
# Define the identity of the package.
PACKAGE='xf86-video-neomagic'
VERSION='1.2.9'
cat >>confdefs.h <<_ACEOF
#define PACKAGE "$PACKAGE"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define VERSION "$VERSION"
_ACEOF
# Some tools Automake needs.
ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
# For better backward compatibility. To be removed once Automake 1.9.x
# dies out for good. For more background, see:
#
#
mkdir_p='$(MKDIR_P)'
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AMTAR='$${TAR-tar}'
# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar pax cpio none'
am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
# POSIX will say in a future version that running "rm -f" with no argument
# is OK; and we want to be able to make that assumption in our Makefile
# recipes. So use an aggressive probe to check that the usage we want is
# actually supported "in the wild" to an acceptable degree.
# See automake bug#10828.
# To make any issue more visible, cause the running configure to be aborted
# by default if the 'rm' program in use doesn't match our expectations; the
# user can still override this though.
if rm -f && rm -fr && rm -rf; then : OK; else
cat >&2 <<'END'
Oops!
Your 'rm' program seems unable to run without file operands specified
on the command line, even when the '-f' option is present. This is contrary
to the behaviour of most rm programs out there, and not conforming with
the upcoming POSIX standard:
Please tell bug-automake@gnu.org about your system, including the value
of your $PATH and any error possibly output before this message. This
can help us improve future automake versions.
END
if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
echo 'Configuration will proceed anyway, since you have set the' >&2
echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
echo >&2
else
cat >&2 <<'END'
Aborting the configuration process, to ensure you take notice of the issue.
You can download and install GNU coreutils to get an 'rm' implementation
that behaves properly: .
If you want to complete the configuration process using your problematic
'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
to "yes", and re-run configure.
END
as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
# Check whether --enable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then :
enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
else
USE_MAINTAINER_MODE=no
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
$as_echo "$USE_MAINTAINER_MODE" >&6; }
if test $USE_MAINTAINER_MODE = yes; then
MAINTAINER_MODE_TRUE=
MAINTAINER_MODE_FALSE='#'
else
MAINTAINER_MODE_TRUE='#'
MAINTAINER_MODE_FALSE=
fi
MAINT=$MAINTAINER_MODE_TRUE
# Require X.Org macros 1.8 or later for MAN_SUBSTS set by XORG_MANPAGE_SECTIONS
DEPDIR="${am__leading_dot}deps"
ac_config_commands="$ac_config_commands depfiles"
am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
@echo this is the am__doit target
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
$as_echo_n "checking for style of include used by $am_make... " >&6; }
am__include="#"
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
# Ignore all kinds of additional output from 'make'.
case `$am_make -s -f confmf 2> /dev/null` in #(
*the\ am__doit\ target*)
am__include=include
am__quote=
_am_result=GNU
;;
esac
# Now try BSD make style include.
if test "$am__include" = "#"; then
echo '.include "confinc"' > confmf
case `$am_make -s -f confmf 2> /dev/null` in #(
*the\ am__doit\ target*)
am__include=.include
am__quote="\""
_am_result=BSD
;;
esac
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
$as_echo "$_am_result" >&6; }
rm -f confinc confmf
# Check whether --enable-dependency-tracking was given.
if test "${enable_dependency_tracking+set}" = set; then :
enableval=$enable_dependency_tracking;
fi
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
am__nodep='_no'
fi
if test "x$enable_dependency_tracking" != xno; then
AMDEP_TRUE=
AMDEP_FALSE='#'
else
AMDEP_TRUE='#'
AMDEP_FALSE=
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
set dummy ${ac_tool_prefix}gcc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_CC"; then
ac_ct_CC=$CC
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
$as_echo "$ac_ct_CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_CC" = x; then
CC=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
CC=$ac_ct_CC
fi
else
CC="$ac_cv_prog_CC"
fi
if test -z "$CC"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
set dummy ${ac_tool_prefix}cc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}cc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
ac_prog_rejected=no
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
fi
ac_cv_prog_CC="cc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
set dummy $ac_cv_prog_CC
shift
if test $# != 0; then
# We chose a different compiler from the bogus one.
# However, it has the same basename, so the bogon will be chosen
# first if we set CC to just the basename; use the full file name.
shift
ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
fi
fi
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$CC"; then
if test -n "$ac_tool_prefix"; then
for ac_prog in cl.exe
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
test -n "$CC" && break
done
fi
if test -z "$CC"; then
ac_ct_CC=$CC
for ac_prog in cl.exe
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
$as_echo "$ac_ct_CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
test -n "$ac_ct_CC" && break
done
if test "x$ac_ct_CC" = x; then
CC=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
CC=$ac_ct_CC
fi
fi
fi
test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "no acceptable C compiler found in \$PATH
See \`config.log' for more details" "$LINENO" 5; }
# Provide some information about the compiler.
$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
set X $ac_compile
ac_compiler=$2
for ac_option in --version -v -V -qversion; do
{ { ac_try="$ac_compiler $ac_option >&5"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_compiler $ac_option >&5") 2>conftest.err
ac_status=$?
if test -s conftest.err; then
sed '10a\
... rest of stderr output deleted ...
10q' conftest.err >conftest.er1
cat conftest.er1 >&5
fi
rm -f conftest.er1 conftest.err
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
done
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
$as_echo_n "checking whether the C compiler works... " >&6; }
ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
# The possible output files:
ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
ac_rmfiles=
for ac_file in $ac_files
do
case $ac_file in
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
* ) ac_rmfiles="$ac_rmfiles $ac_file";;
esac
done
rm -f $ac_rmfiles
if { { ac_try="$ac_link_default"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_link_default") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then :
# Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
# in a Makefile. We should not override ac_cv_exeext if it was cached,
# so that the user can short-circuit this test for compilers unknown to
# Autoconf.
for ac_file in $ac_files ''
do
test -f "$ac_file" || continue
case $ac_file in
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
;;
[ab].out )
# We found the default executable, but exeext='' is most
# certainly right.
break;;
*.* )
if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
then :; else
ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
fi
# We set ac_cv_exeext here because the later test for it is not
# safe: cross compilers may not add the suffix if given an `-o'
# argument, so we may need to know it at that point already.
# Even if this section looks crufty: it has the advantage of
# actually working.
break;;
* )
break;;
esac
done
test "$ac_cv_exeext" = no && ac_cv_exeext=
else
ac_file=''
fi
if test -z "$ac_file"; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error 77 "C compiler cannot create executables
See \`config.log' for more details" "$LINENO" 5; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
$as_echo_n "checking for C compiler default output file name... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
$as_echo "$ac_file" >&6; }
ac_exeext=$ac_cv_exeext
rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
ac_clean_files=$ac_clean_files_save
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
$as_echo_n "checking for suffix of executables... " >&6; }
if { { ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_link") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then :
# If both `conftest.exe' and `conftest' are `present' (well, observable)
# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
# work properly (i.e., refer to `conftest.exe'), while it won't with
# `rm'.
for ac_file in conftest.exe conftest conftest.*; do
test -f "$ac_file" || continue
case $ac_file in
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
*.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
break;;
* ) break;;
esac
done
else
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details" "$LINENO" 5; }
fi
rm -f conftest conftest$ac_cv_exeext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
$as_echo "$ac_cv_exeext" >&6; }
rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
int
main ()
{
FILE *f = fopen ("conftest.out", "w");
return ferror (f) || fclose (f) != 0;
;
return 0;
}
_ACEOF
ac_clean_files="$ac_clean_files conftest.out"
# Check that the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
$as_echo_n "checking whether we are cross compiling... " >&6; }
if test "$cross_compiling" != yes; then
{ { ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_link") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
if { ac_try='./conftest$ac_cv_exeext'
{ { case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_try") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; }; then
cross_compiling=no
else
if test "$cross_compiling" = maybe; then
cross_compiling=yes
else
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details" "$LINENO" 5; }
fi
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
$as_echo "$cross_compiling" >&6; }
rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
ac_clean_files=$ac_clean_files_save
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
$as_echo_n "checking for suffix of object files... " >&6; }
if ${ac_cv_objext+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.o conftest.obj
if { { ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_compile") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then :
for ac_file in conftest.o conftest.obj conftest.*; do
test -f "$ac_file" || continue;
case $ac_file in
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
*) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
break;;
esac
done
else
$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "cannot compute suffix of object files: cannot compile
See \`config.log' for more details" "$LINENO" 5; }
fi
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
$as_echo "$ac_cv_objext" >&6; }
OBJEXT=$ac_cv_objext
ac_objext=$OBJEXT
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
if ${ac_cv_c_compiler_gnu+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
#ifndef __GNUC__
choke me
#endif
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
ac_compiler_gnu=yes
else
ac_compiler_gnu=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_c_compiler_gnu=$ac_compiler_gnu
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
$as_echo "$ac_cv_c_compiler_gnu" >&6; }
if test $ac_compiler_gnu = yes; then
GCC=yes
else
GCC=
fi
ac_test_CFLAGS=${CFLAGS+set}
ac_save_CFLAGS=$CFLAGS
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
$as_echo_n "checking whether $CC accepts -g... " >&6; }
if ${ac_cv_prog_cc_g+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_save_c_werror_flag=$ac_c_werror_flag
ac_c_werror_flag=yes
ac_cv_prog_cc_g=no
CFLAGS="-g"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
ac_cv_prog_cc_g=yes
else
CFLAGS=""
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
else
ac_c_werror_flag=$ac_save_c_werror_flag
CFLAGS="-g"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
ac_cv_prog_cc_g=yes
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_c_werror_flag=$ac_save_c_werror_flag
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
$as_echo "$ac_cv_prog_cc_g" >&6; }
if test "$ac_test_CFLAGS" = set; then
CFLAGS=$ac_save_CFLAGS
elif test $ac_cv_prog_cc_g = yes; then
if test "$GCC" = yes; then
CFLAGS="-g -O2"
else
CFLAGS="-g"
fi
else
if test "$GCC" = yes; then
CFLAGS="-O2"
else
CFLAGS=
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
if ${ac_cv_prog_cc_c89+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_cv_prog_cc_c89=no
ac_save_CC=$CC
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
#include
struct stat;
/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
struct buf { int x; };
FILE * (*rcsopen) (struct buf *, struct stat *, int);
static char *e (p, i)
char **p;
int i;
{
return p[i];
}
static char *f (char * (*g) (char **, int), char **p, ...)
{
char *s;
va_list v;
va_start (v,p);
s = g (p, va_arg (v,int));
va_end (v);
return s;
}
/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
function prototypes and stuff, but not '\xHH' hex character constants.
These don't provoke an error unfortunately, instead are silently treated
as 'x'. The following induces an error, until -std is added to get
proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
array size at least. It's necessary to write '\x00'==0 to get something
that's true only with -std. */
int osf4_cc_array ['\x00' == 0 ? 1 : -1];
/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
inside strings and character constants. */
#define FOO(x) 'x'
int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
int test (int i, double x);
struct s1 {int (*f) (int a);};
struct s2 {int (*f) (double a);};
int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
int argc;
char **argv;
int
main ()
{
return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
;
return 0;
}
_ACEOF
for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
do
CC="$ac_save_CC $ac_arg"
if ac_fn_c_try_compile "$LINENO"; then :
ac_cv_prog_cc_c89=$ac_arg
fi
rm -f core conftest.err conftest.$ac_objext
test "x$ac_cv_prog_cc_c89" != "xno" && break
done
rm -f conftest.$ac_ext
CC=$ac_save_CC
fi
# AC_CACHE_VAL
case "x$ac_cv_prog_cc_c89" in
x)
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
$as_echo "none needed" >&6; } ;;
xno)
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
$as_echo "unsupported" >&6; } ;;
*)
CC="$CC $ac_cv_prog_cc_c89"
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
esac
if test "x$ac_cv_prog_cc_c89" != xno; then :
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
if ${am_cv_prog_cc_c_o+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
# Make sure it works both with $CC and with simple cc.
# Following AC_PROG_CC_C_O, we do the test twice because some
# compilers refuse to overwrite an existing .o file with -o,
# though they will create one.
am_cv_prog_cc_c_o=yes
for am_i in 1 2; do
if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } \
&& test -f conftest2.$ac_objext; then
: OK
else
am_cv_prog_cc_c_o=no
break
fi
done
rm -f core conftest*
unset am_i
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
$as_echo "$am_cv_prog_cc_c_o" >&6; }
if test "$am_cv_prog_cc_c_o" != yes; then
# Losing compiler, so override with the script.
# FIXME: It is wrong to rewrite CC.
# But if we don't then we get into trouble of one sort or another.
# A longer-term fix would be to have automake use am__CC in this case,
# and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
CC="$am_aux_dir/compile $CC"
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
depcc="$CC" am_compiler_list=
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
$as_echo_n "checking dependency style of $depcc... " >&6; }
if ${am_cv_CC_dependencies_compiler_type+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
# making a dummy file named 'D' -- because '-MD' means "put the output
# in D".
rm -rf conftest.dir
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
# using a relative directory.
cp "$am_depcomp" conftest.dir
cd conftest.dir
# We will build objects and dependencies in a subdirectory because
# it helps to detect inapplicable dependency modes. For instance
# both Tru64's cc and ICC support -MD to output dependencies as a
# side effect of compilation, but ICC will put the dependencies in
# the current directory while Tru64 will put them in the object
# directory.
mkdir sub
am_cv_CC_dependencies_compiler_type=none
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
fi
am__universal=false
case " $depcc " in #(
*\ -arch\ *\ -arch\ *) am__universal=true ;;
esac
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
# we should not choose a depcomp mode which is confused by this.
#
# We need to recreate these files for each test, as the compiler may
# overwrite some of them when testing with obscure command lines.
# This happens at least with the AIX C compiler.
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
# Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
# Solaris 10 /bin/sh.
echo '/* dummy */' > sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
# We check with '-c' and '-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
# handle '-M -o', and we need to detect this. Also, some Intel
# versions had trouble with output in subdirs.
am__obj=sub/conftest.${OBJEXT-o}
am__minus_obj="-o $am__obj"
case $depmode in
gcc)
# This depmode causes a compiler race in universal mode.
test "$am__universal" = false || continue
;;
nosideeffect)
# After this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested.
if test "x$enable_dependency_tracking" = xyes; then
continue
else
break
fi
;;
msvc7 | msvc7msys | msvisualcpp | msvcmsys)
# This compiler won't grok '-c -o', but also, the minuso test has
# not run yet. These depmodes are late enough in the game, and
# so weak that their functioning should not be impacted.
am__obj=conftest.${OBJEXT-o}
am__minus_obj=
;;
none) break ;;
esac
if depmode=$depmode \
source=sub/conftest.c object=$am__obj \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
# that says an option was ignored or not supported.
# When given -MP, icc 7.0 and 7.1 complain thusly:
# icc: Command line warning: ignoring option '-M'; no argument required
# The diagnosis changed in icc 8.0:
# icc: Command line remark: option '-MP' not supported
if (grep 'ignoring option' conftest.err ||
grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
am_cv_CC_dependencies_compiler_type=$depmode
break
fi
fi
done
cd ..
rm -rf conftest.dir
else
am_cv_CC_dependencies_compiler_type=none
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
if
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
am__fastdepCC_TRUE=
am__fastdepCC_FALSE='#'
else
am__fastdepCC_TRUE='#'
am__fastdepCC_FALSE=
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C99" >&5
$as_echo_n "checking for $CC option to accept ISO C99... " >&6; }
if ${ac_cv_prog_cc_c99+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_cv_prog_cc_c99=no
ac_save_CC=$CC
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
#include
#include
#include
#include
// Check varargs macros. These examples are taken from C99 6.10.3.5.
#define debug(...) fprintf (stderr, __VA_ARGS__)
#define showlist(...) puts (#__VA_ARGS__)
#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__))
static void
test_varargs_macros (void)
{
int x = 1234;
int y = 5678;
debug ("Flag");
debug ("X = %d\n", x);
showlist (The first, second, and third items.);
report (x>y, "x is %d but y is %d", x, y);
}
// Check long long types.
#define BIG64 18446744073709551615ull
#define BIG32 4294967295ul
#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0)
#if !BIG_OK
your preprocessor is broken;
#endif
#if BIG_OK
#else
your preprocessor is broken;
#endif
static long long int bignum = -9223372036854775807LL;
static unsigned long long int ubignum = BIG64;
struct incomplete_array
{
int datasize;
double data[];
};
struct named_init {
int number;
const wchar_t *name;
double average;
};
typedef const char *ccp;
static inline int
test_restrict (ccp restrict text)
{
// See if C++-style comments work.
// Iterate through items via the restricted pointer.
// Also check for declarations in for loops.
for (unsigned int i = 0; *(text+i) != '\0'; ++i)
continue;
return 0;
}
// Check varargs and va_copy.
static void
test_varargs (const char *format, ...)
{
va_list args;
va_start (args, format);
va_list args_copy;
va_copy (args_copy, args);
const char *str;
int number;
float fnumber;
while (*format)
{
switch (*format++)
{
case 's': // string
str = va_arg (args_copy, const char *);
break;
case 'd': // int
number = va_arg (args_copy, int);
break;
case 'f': // float
fnumber = va_arg (args_copy, double);
break;
default:
break;
}
}
va_end (args_copy);
va_end (args);
}
int
main ()
{
// Check bool.
_Bool success = false;
// Check restrict.
if (test_restrict ("String literal") == 0)
success = true;
char *restrict newvar = "Another string";
// Check varargs.
test_varargs ("s, d' f .", "string", 65, 34.234);
test_varargs_macros ();
// Check flexible array members.
struct incomplete_array *ia =
malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10));
ia->datasize = 10;
for (int i = 0; i < ia->datasize; ++i)
ia->data[i] = i * 1.234;
// Check named initializers.
struct named_init ni = {
.number = 34,
.name = L"Test wide string",
.average = 543.34343,
};
ni.number = 58;
int dynamic_array[ni.number];
dynamic_array[ni.number - 1] = 543;
// work around unused variable warnings
return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x'
|| dynamic_array[ni.number - 1] != 543);
;
return 0;
}
_ACEOF
for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -D_STDC_C99= -qlanglvl=extc99
do
CC="$ac_save_CC $ac_arg"
if ac_fn_c_try_compile "$LINENO"; then :
ac_cv_prog_cc_c99=$ac_arg
fi
rm -f core conftest.err conftest.$ac_objext
test "x$ac_cv_prog_cc_c99" != "xno" && break
done
rm -f conftest.$ac_ext
CC=$ac_save_CC
fi
# AC_CACHE_VAL
case "x$ac_cv_prog_cc_c99" in
x)
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
$as_echo "none needed" >&6; } ;;
xno)
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
$as_echo "unsupported" >&6; } ;;
*)
CC="$CC $ac_cv_prog_cc_c99"
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5
$as_echo "$ac_cv_prog_cc_c99" >&6; } ;;
esac
if test "x$ac_cv_prog_cc_c99" != xno; then :
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
$as_echo_n "checking how to run the C preprocessor... " >&6; }
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
fi
if test -z "$CPP"; then
if ${ac_cv_prog_CPP+:} false; then :
$as_echo_n "(cached) " >&6
else
# Double quotes because CPP needs to be expanded
for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
do
ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
# Use a header file that comes with gcc, so configuring glibc
# with a fresh cross-compiler works.
# Prefer to if __STDC__ is defined, since
# exists even on freestanding compilers.
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp. "Syntax error" is here to catch this case.
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#ifdef __STDC__
# include
#else
# include
#endif
Syntax error
_ACEOF
if ac_fn_c_try_cpp "$LINENO"; then :
else
# Broken: fails on valid input.
continue
fi
rm -f conftest.err conftest.i conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
_ACEOF
if ac_fn_c_try_cpp "$LINENO"; then :
# Broken: success on invalid input.
continue
else
# Passes both tests.
ac_preproc_ok=:
break
fi
rm -f conftest.err conftest.i conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.i conftest.err conftest.$ac_ext
if $ac_preproc_ok; then :
break
fi
done
ac_cv_prog_CPP=$CPP
fi
CPP=$ac_cv_prog_CPP
else
ac_cv_prog_CPP=$CPP
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
$as_echo "$CPP" >&6; }
ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
# Use a header file that comes with gcc, so configuring glibc
# with a fresh cross-compiler works.
# Prefer to if __STDC__ is defined, since
# exists even on freestanding compilers.
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp. "Syntax error" is here to catch this case.
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#ifdef __STDC__
# include
#else
# include
#endif
Syntax error
_ACEOF
if ac_fn_c_try_cpp "$LINENO"; then :
else
# Broken: fails on valid input.
continue
fi
rm -f conftest.err conftest.i conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
_ACEOF
if ac_fn_c_try_cpp "$LINENO"; then :
# Broken: success on invalid input.
continue
else
# Passes both tests.
ac_preproc_ok=:
break
fi
rm -f conftest.err conftest.i conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.i conftest.err conftest.$ac_ext
if $ac_preproc_ok; then :
else
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
See \`config.log' for more details" "$LINENO" 5; }
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
if ${ac_cv_path_GREP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -z "$GREP"; then
ac_path_GREP_found=false
# Loop through the user's path and test for each of PROGNAME-LIST
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_prog in grep ggrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
as_fn_executable_p "$ac_path_GREP" || continue
# Check for GNU ac_path_GREP and select it if it is found.
# Check for GNU $ac_path_GREP
case `"$ac_path_GREP" --version 2>&1` in
*GNU*)
ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
*)
ac_count=0
$as_echo_n 0123456789 >"conftest.in"
while :
do
cat "conftest.in" "conftest.in" >"conftest.tmp"
mv "conftest.tmp" "conftest.in"
cp "conftest.in" "conftest.nl"
$as_echo 'GREP' >> "conftest.nl"
"$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
as_fn_arith $ac_count + 1 && ac_count=$as_val
if test $ac_count -gt ${ac_path_GREP_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_GREP="$ac_path_GREP"
ac_path_GREP_max=$ac_count
fi
# 10*(2^10) chars as input seems more than enough
test $ac_count -gt 10 && break
done
rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
esac
$ac_path_GREP_found && break 3
done
done
done
IFS=$as_save_IFS
if test -z "$ac_cv_path_GREP"; then
as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_GREP=$GREP
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
$as_echo "$ac_cv_path_GREP" >&6; }
GREP="$ac_cv_path_GREP"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
$as_echo_n "checking for egrep... " >&6; }
if ${ac_cv_path_EGREP+:} false; then :
$as_echo_n "(cached) " >&6
else
if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
then ac_cv_path_EGREP="$GREP -E"
else
if test -z "$EGREP"; then
ac_path_EGREP_found=false
# Loop through the user's path and test for each of PROGNAME-LIST
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_prog in egrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
as_fn_executable_p "$ac_path_EGREP" || continue
# Check for GNU ac_path_EGREP and select it if it is found.
# Check for GNU $ac_path_EGREP
case `"$ac_path_EGREP" --version 2>&1` in
*GNU*)
ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
*)
ac_count=0
$as_echo_n 0123456789 >"conftest.in"
while :
do
cat "conftest.in" "conftest.in" >"conftest.tmp"
mv "conftest.tmp" "conftest.in"
cp "conftest.in" "conftest.nl"
$as_echo 'EGREP' >> "conftest.nl"
"$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
as_fn_arith $ac_count + 1 && ac_count=$as_val
if test $ac_count -gt ${ac_path_EGREP_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_EGREP="$ac_path_EGREP"
ac_path_EGREP_max=$ac_count
fi
# 10*(2^10) chars as input seems more than enough
test $ac_count -gt 10 && break
done
rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
esac
$ac_path_EGREP_found && break 3
done
done
done
IFS=$as_save_IFS
if test -z "$ac_cv_path_EGREP"; then
as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_EGREP=$EGREP
fi
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
$as_echo "$ac_cv_path_EGREP" >&6; }
EGREP="$ac_cv_path_EGREP"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
$as_echo_n "checking for ANSI C header files... " >&6; }
if ${ac_cv_header_stdc+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
#include
#include
#include
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
ac_cv_header_stdc=yes
else
ac_cv_header_stdc=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
$EGREP "memchr" >/dev/null 2>&1; then :
else
ac_cv_header_stdc=no
fi
rm -f conftest*
fi
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
$EGREP "free" >/dev/null 2>&1; then :
else
ac_cv_header_stdc=no
fi
rm -f conftest*
fi
if test $ac_cv_header_stdc = yes; then
# /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
if test "$cross_compiling" = yes; then :
:
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
#include
#if ((' ' & 0x0FF) == 0x020)
# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#else
# define ISLOWER(c) \
(('a' <= (c) && (c) <= 'i') \
|| ('j' <= (c) && (c) <= 'r') \
|| ('s' <= (c) && (c) <= 'z'))
# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
#endif
#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
int
main ()
{
int i;
for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i))
|| toupper (i) != TOUPPER (i))
return 2;
return 0;
}
_ACEOF
if ac_fn_c_try_run "$LINENO"; then :
else
ac_cv_header_stdc=no
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
conftest.$ac_objext conftest.beam conftest.$ac_ext
fi
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
$as_echo "$ac_cv_header_stdc" >&6; }
if test $ac_cv_header_stdc = yes; then
$as_echo "#define STDC_HEADERS 1" >>confdefs.h
fi
# On IRIX 5.3, sys/types and inttypes.h are conflicting.
for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
inttypes.h stdint.h unistd.h
do :
as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
"
if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
fi
done
ac_fn_c_check_decl "$LINENO" "__clang__" "ac_cv_have_decl___clang__" "$ac_includes_default"
if test "x$ac_cv_have_decl___clang__" = xyes; then :
CLANGCC="yes"
else
CLANGCC="no"
fi
ac_fn_c_check_decl "$LINENO" "__INTEL_COMPILER" "ac_cv_have_decl___INTEL_COMPILER" "$ac_includes_default"
if test "x$ac_cv_have_decl___INTEL_COMPILER" = xyes; then :
INTELCC="yes"
else
INTELCC="no"
fi
ac_fn_c_check_decl "$LINENO" "__SUNPRO_C" "ac_cv_have_decl___SUNPRO_C" "$ac_includes_default"
if test "x$ac_cv_have_decl___SUNPRO_C" = xyes; then :
SUNCC="yes"
else
SUNCC="no"
fi
if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_path_PKG_CONFIG+:} false; then :
$as_echo_n "(cached) " >&6
else
case $PKG_CONFIG in
[\\/]* | ?:[\\/]*)
ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
;;
*)
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
;;
esac
fi
PKG_CONFIG=$ac_cv_path_PKG_CONFIG
if test -n "$PKG_CONFIG"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
$as_echo "$PKG_CONFIG" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_path_PKG_CONFIG"; then
ac_pt_PKG_CONFIG=$PKG_CONFIG
# Extract the first word of "pkg-config", so it can be a program name with args.
set dummy pkg-config; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then :
$as_echo_n "(cached) " >&6
else
case $ac_pt_PKG_CONFIG in
[\\/]* | ?:[\\/]*)
ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
;;
*)
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
;;
esac
fi
ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
if test -n "$ac_pt_PKG_CONFIG"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
$as_echo "$ac_pt_PKG_CONFIG" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_pt_PKG_CONFIG" = x; then
PKG_CONFIG=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
PKG_CONFIG=$ac_pt_PKG_CONFIG
fi
else
PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
fi
fi
if test -n "$PKG_CONFIG"; then
_pkg_min_version=0.9.0
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
PKG_CONFIG=""
fi
fi
# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
$as_echo_n "checking build system type... " >&6; }
if ${ac_cv_build+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_build_alias=$build_alias
test "x$ac_build_alias" = x &&
ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
test "x$ac_build_alias" = x &&
as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
$as_echo "$ac_cv_build" >&6; }
case $ac_cv_build in
*-*-*) ;;
*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
esac
build=$ac_cv_build
ac_save_IFS=$IFS; IFS='-'
set x $ac_cv_build
shift
build_cpu=$1
build_vendor=$2
shift; shift
# Remember, the first character of IFS is used to create $*,
# except with old shells:
build_os=$*
IFS=$ac_save_IFS
case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
$as_echo_n "checking host system type... " >&6; }
if ${ac_cv_host+:} false; then :
$as_echo_n "(cached) " >&6
else
if test "x$host_alias" = x; then
ac_cv_host=$ac_cv_build
else
ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
$as_echo "$ac_cv_host" >&6; }
case $ac_cv_host in
*-*-*) ;;
*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
esac
host=$ac_cv_host
ac_save_IFS=$IFS; IFS='-'
set x $ac_cv_host
shift
host_cpu=$1
host_vendor=$2
shift; shift
# Remember, the first character of IFS is used to create $*,
# except with old shells:
host_os=$*
IFS=$ac_save_IFS
case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
$as_echo_n "checking for a sed that does not truncate output... " >&6; }
if ${ac_cv_path_SED+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
for ac_i in 1 2 3 4 5 6 7; do
ac_script="$ac_script$as_nl$ac_script"
done
echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
{ ac_script=; unset ac_script;}
if test -z "$SED"; then
ac_path_SED_found=false
# Loop through the user's path and test for each of PROGNAME-LIST
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_prog in sed gsed; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
as_fn_executable_p "$ac_path_SED" || continue
# Check for GNU ac_path_SED and select it if it is found.
# Check for GNU $ac_path_SED
case `"$ac_path_SED" --version 2>&1` in
*GNU*)
ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
*)
ac_count=0
$as_echo_n 0123456789 >"conftest.in"
while :
do
cat "conftest.in" "conftest.in" >"conftest.tmp"
mv "conftest.tmp" "conftest.in"
cp "conftest.in" "conftest.nl"
$as_echo '' >> "conftest.nl"
"$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
as_fn_arith $ac_count + 1 && ac_count=$as_val
if test $ac_count -gt ${ac_path_SED_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_SED="$ac_path_SED"
ac_path_SED_max=$ac_count
fi
# 10*(2^10) chars as input seems more than enough
test $ac_count -gt 10 && break
done
rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
esac
$ac_path_SED_found && break 3
done
done
done
IFS=$as_save_IFS
if test -z "$ac_cv_path_SED"; then
as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
fi
else
ac_cv_path_SED=$SED
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
$as_echo "$ac_cv_path_SED" >&6; }
SED="$ac_cv_path_SED"
rm -f conftest.sed
# Check whether --enable-selective-werror was given.
if test "${enable_selective_werror+set}" = set; then :
enableval=$enable_selective_werror; SELECTIVE_WERROR=$enableval
else
SELECTIVE_WERROR=yes
fi
# -v is too short to test reliably with XORG_TESTSET_CFLAG
if test "x$SUNCC" = "xyes"; then
BASE_CFLAGS="-v"
else
BASE_CFLAGS=""
fi
# This chunk of warnings were those that existed in the legacy CWARNFLAGS
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wall"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wall" >&5
$as_echo_n "checking if $CC supports -Wall... " >&6; }
cacheid=xorg_cv_cc_flag__Wall
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wall"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wpointer-arith"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wpointer-arith" >&5
$as_echo_n "checking if $CC supports -Wpointer-arith... " >&6; }
cacheid=xorg_cv_cc_flag__Wpointer_arith
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wpointer-arith"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wmissing-declarations"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wmissing-declarations" >&5
$as_echo_n "checking if $CC supports -Wmissing-declarations... " >&6; }
cacheid=xorg_cv_cc_flag__Wmissing_declarations
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wmissing-declarations"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wformat=2"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wformat=2" >&5
$as_echo_n "checking if $CC supports -Wformat=2... " >&6; }
cacheid=xorg_cv_cc_flag__Wformat_2
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wformat=2"
found="yes"
fi
fi
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wformat"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wformat" >&5
$as_echo_n "checking if $CC supports -Wformat... " >&6; }
cacheid=xorg_cv_cc_flag__Wformat
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wformat"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wstrict-prototypes"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wstrict-prototypes" >&5
$as_echo_n "checking if $CC supports -Wstrict-prototypes... " >&6; }
cacheid=xorg_cv_cc_flag__Wstrict_prototypes
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wstrict-prototypes"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wmissing-prototypes"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wmissing-prototypes" >&5
$as_echo_n "checking if $CC supports -Wmissing-prototypes... " >&6; }
cacheid=xorg_cv_cc_flag__Wmissing_prototypes
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wmissing-prototypes"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wnested-externs"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wnested-externs" >&5
$as_echo_n "checking if $CC supports -Wnested-externs... " >&6; }
cacheid=xorg_cv_cc_flag__Wnested_externs
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wnested-externs"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wbad-function-cast"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wbad-function-cast" >&5
$as_echo_n "checking if $CC supports -Wbad-function-cast... " >&6; }
cacheid=xorg_cv_cc_flag__Wbad_function_cast
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wbad-function-cast"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wold-style-definition"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wold-style-definition" >&5
$as_echo_n "checking if $CC supports -Wold-style-definition... " >&6; }
cacheid=xorg_cv_cc_flag__Wold_style_definition
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wold-style-definition"
found="yes"
fi
fi
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -fd"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -fd" >&5
$as_echo_n "checking if $CC supports -fd... " >&6; }
cacheid=xorg_cv_cc_flag__fd
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -fd"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wdeclaration-after-statement"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wdeclaration-after-statement" >&5
$as_echo_n "checking if $CC supports -Wdeclaration-after-statement... " >&6; }
cacheid=xorg_cv_cc_flag__Wdeclaration_after_statement
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wdeclaration-after-statement"
found="yes"
fi
fi
# This chunk adds additional warnings that could catch undesired effects.
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wunused"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wunused" >&5
$as_echo_n "checking if $CC supports -Wunused... " >&6; }
cacheid=xorg_cv_cc_flag__Wunused
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wunused"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wuninitialized"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wuninitialized" >&5
$as_echo_n "checking if $CC supports -Wuninitialized... " >&6; }
cacheid=xorg_cv_cc_flag__Wuninitialized
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wuninitialized"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wshadow"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wshadow" >&5
$as_echo_n "checking if $CC supports -Wshadow... " >&6; }
cacheid=xorg_cv_cc_flag__Wshadow
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wshadow"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wmissing-noreturn"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wmissing-noreturn" >&5
$as_echo_n "checking if $CC supports -Wmissing-noreturn... " >&6; }
cacheid=xorg_cv_cc_flag__Wmissing_noreturn
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wmissing-noreturn"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wmissing-format-attribute"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wmissing-format-attribute" >&5
$as_echo_n "checking if $CC supports -Wmissing-format-attribute... " >&6; }
cacheid=xorg_cv_cc_flag__Wmissing_format_attribute
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wmissing-format-attribute"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wredundant-decls"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wredundant-decls" >&5
$as_echo_n "checking if $CC supports -Wredundant-decls... " >&6; }
cacheid=xorg_cv_cc_flag__Wredundant_decls
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wredundant-decls"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wlogical-op"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wlogical-op" >&5
$as_echo_n "checking if $CC supports -Wlogical-op... " >&6; }
cacheid=xorg_cv_cc_flag__Wlogical_op
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wlogical-op"
found="yes"
fi
fi
# These are currently disabled because they are noisy. They will be enabled
# in the future once the codebase is sufficiently modernized to silence
# them. For now, I don't want them to drown out the other warnings.
# XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wparentheses])
# XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wcast-align])
# XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wcast-qual])
# Turn some warnings into errors, so we don't accidently get successful builds
# when there are problems that should be fixed.
if test "x$SELECTIVE_WERROR" = "xyes" ; then
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Werror=implicit"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=implicit" >&5
$as_echo_n "checking if $CC supports -Werror=implicit... " >&6; }
cacheid=xorg_cv_cc_flag__Werror_implicit
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Werror=implicit"
found="yes"
fi
fi
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -errwarn=E_NO_EXPLICIT_TYPE_GIVEN -errwarn=E_NO_IMPLICIT_DECL_ALLOWED"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -errwarn=E_NO_EXPLICIT_TYPE_GIVEN -errwarn=E_NO_IMPLICIT_DECL_ALLOWED" >&5
$as_echo_n "checking if $CC supports -errwarn=E_NO_EXPLICIT_TYPE_GIVEN -errwarn=E_NO_IMPLICIT_DECL_ALLOWED... " >&6; }
cacheid=xorg_cv_cc_flag__errwarn_E_NO_EXPLICIT_TYPE_GIVEN__errwarn_E_NO_IMPLICIT_DECL_ALLOWED
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -errwarn=E_NO_EXPLICIT_TYPE_GIVEN -errwarn=E_NO_IMPLICIT_DECL_ALLOWED"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Werror=nonnull"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=nonnull" >&5
$as_echo_n "checking if $CC supports -Werror=nonnull... " >&6; }
cacheid=xorg_cv_cc_flag__Werror_nonnull
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Werror=nonnull"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Werror=init-self"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=init-self" >&5
$as_echo_n "checking if $CC supports -Werror=init-self... " >&6; }
cacheid=xorg_cv_cc_flag__Werror_init_self
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Werror=init-self"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Werror=main"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=main" >&5
$as_echo_n "checking if $CC supports -Werror=main... " >&6; }
cacheid=xorg_cv_cc_flag__Werror_main
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Werror=main"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Werror=missing-braces"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=missing-braces" >&5
$as_echo_n "checking if $CC supports -Werror=missing-braces... " >&6; }
cacheid=xorg_cv_cc_flag__Werror_missing_braces
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Werror=missing-braces"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Werror=sequence-point"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=sequence-point" >&5
$as_echo_n "checking if $CC supports -Werror=sequence-point... " >&6; }
cacheid=xorg_cv_cc_flag__Werror_sequence_point
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Werror=sequence-point"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Werror=return-type"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=return-type" >&5
$as_echo_n "checking if $CC supports -Werror=return-type... " >&6; }
cacheid=xorg_cv_cc_flag__Werror_return_type
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Werror=return-type"
found="yes"
fi
fi
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -errwarn=E_FUNC_HAS_NO_RETURN_STMT"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -errwarn=E_FUNC_HAS_NO_RETURN_STMT" >&5
$as_echo_n "checking if $CC supports -errwarn=E_FUNC_HAS_NO_RETURN_STMT... " >&6; }
cacheid=xorg_cv_cc_flag__errwarn_E_FUNC_HAS_NO_RETURN_STMT
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -errwarn=E_FUNC_HAS_NO_RETURN_STMT"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Werror=trigraphs"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=trigraphs" >&5
$as_echo_n "checking if $CC supports -Werror=trigraphs... " >&6; }
cacheid=xorg_cv_cc_flag__Werror_trigraphs
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Werror=trigraphs"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Werror=array-bounds"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=array-bounds" >&5
$as_echo_n "checking if $CC supports -Werror=array-bounds... " >&6; }
cacheid=xorg_cv_cc_flag__Werror_array_bounds
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Werror=array-bounds"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Werror=write-strings"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=write-strings" >&5
$as_echo_n "checking if $CC supports -Werror=write-strings... " >&6; }
cacheid=xorg_cv_cc_flag__Werror_write_strings
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Werror=write-strings"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Werror=address"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=address" >&5
$as_echo_n "checking if $CC supports -Werror=address... " >&6; }
cacheid=xorg_cv_cc_flag__Werror_address
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Werror=address"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Werror=int-to-pointer-cast"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=int-to-pointer-cast" >&5
$as_echo_n "checking if $CC supports -Werror=int-to-pointer-cast... " >&6; }
cacheid=xorg_cv_cc_flag__Werror_int_to_pointer_cast
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Werror=int-to-pointer-cast"
found="yes"
fi
fi
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -errwarn=E_BAD_PTR_INT_COMBINATION"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -errwarn=E_BAD_PTR_INT_COMBINATION" >&5
$as_echo_n "checking if $CC supports -errwarn=E_BAD_PTR_INT_COMBINATION... " >&6; }
cacheid=xorg_cv_cc_flag__errwarn_E_BAD_PTR_INT_COMBINATION
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -errwarn=E_BAD_PTR_INT_COMBINATION"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Werror=pointer-to-int-cast"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=pointer-to-int-cast" >&5
$as_echo_n "checking if $CC supports -Werror=pointer-to-int-cast... " >&6; }
cacheid=xorg_cv_cc_flag__Werror_pointer_to_int_cast
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Werror=pointer-to-int-cast"
found="yes"
fi
fi
# Also -errwarn=E_BAD_PTR_INT_COMBINATION
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: You have chosen not to turn some select compiler warnings into errors. This should not be necessary. Please report why you needed to do so in a bug report at $PACKAGE_BUGREPORT" >&5
$as_echo "$as_me: WARNING: You have chosen not to turn some select compiler warnings into errors. This should not be necessary. Please report why you needed to do so in a bug report at $PACKAGE_BUGREPORT" >&2;}
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wimplicit"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wimplicit" >&5
$as_echo_n "checking if $CC supports -Wimplicit... " >&6; }
cacheid=xorg_cv_cc_flag__Wimplicit
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wimplicit"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wnonnull"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wnonnull" >&5
$as_echo_n "checking if $CC supports -Wnonnull... " >&6; }
cacheid=xorg_cv_cc_flag__Wnonnull
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wnonnull"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Winit-self"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Winit-self" >&5
$as_echo_n "checking if $CC supports -Winit-self... " >&6; }
cacheid=xorg_cv_cc_flag__Winit_self
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Winit-self"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wmain"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wmain" >&5
$as_echo_n "checking if $CC supports -Wmain... " >&6; }
cacheid=xorg_cv_cc_flag__Wmain
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wmain"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wmissing-braces"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wmissing-braces" >&5
$as_echo_n "checking if $CC supports -Wmissing-braces... " >&6; }
cacheid=xorg_cv_cc_flag__Wmissing_braces
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wmissing-braces"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wsequence-point"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wsequence-point" >&5
$as_echo_n "checking if $CC supports -Wsequence-point... " >&6; }
cacheid=xorg_cv_cc_flag__Wsequence_point
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wsequence-point"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wreturn-type"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wreturn-type" >&5
$as_echo_n "checking if $CC supports -Wreturn-type... " >&6; }
cacheid=xorg_cv_cc_flag__Wreturn_type
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wreturn-type"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wtrigraphs"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wtrigraphs" >&5
$as_echo_n "checking if $CC supports -Wtrigraphs... " >&6; }
cacheid=xorg_cv_cc_flag__Wtrigraphs
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wtrigraphs"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Warray-bounds"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Warray-bounds" >&5
$as_echo_n "checking if $CC supports -Warray-bounds... " >&6; }
cacheid=xorg_cv_cc_flag__Warray_bounds
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Warray-bounds"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wwrite-strings"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wwrite-strings" >&5
$as_echo_n "checking if $CC supports -Wwrite-strings... " >&6; }
cacheid=xorg_cv_cc_flag__Wwrite_strings
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wwrite-strings"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Waddress"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Waddress" >&5
$as_echo_n "checking if $CC supports -Waddress... " >&6; }
cacheid=xorg_cv_cc_flag__Waddress
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Waddress"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wint-to-pointer-cast"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wint-to-pointer-cast" >&5
$as_echo_n "checking if $CC supports -Wint-to-pointer-cast... " >&6; }
cacheid=xorg_cv_cc_flag__Wint_to_pointer_cast
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wint-to-pointer-cast"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Wpointer-to-int-cast"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Wpointer-to-int-cast" >&5
$as_echo_n "checking if $CC supports -Wpointer-to-int-cast... " >&6; }
cacheid=xorg_cv_cc_flag__Wpointer_to_int_cast
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
BASE_CFLAGS="$BASE_CFLAGS -Wpointer-to-int-cast"
found="yes"
fi
fi
fi
CWARNFLAGS="$BASE_CFLAGS"
if test "x$GCC" = xyes ; then
CWARNFLAGS="$CWARNFLAGS -fno-strict-aliasing"
fi
# Check whether --enable-strict-compilation was given.
if test "${enable_strict_compilation+set}" = set; then :
enableval=$enable_strict_compilation; STRICT_COMPILE=$enableval
else
STRICT_COMPILE=no
fi
STRICT_CFLAGS=""
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -pedantic"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -pedantic" >&5
$as_echo_n "checking if $CC supports -pedantic... " >&6; }
cacheid=xorg_cv_cc_flag__pedantic
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
STRICT_CFLAGS="$STRICT_CFLAGS -pedantic"
found="yes"
fi
fi
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Werror"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror" >&5
$as_echo_n "checking if $CC supports -Werror... " >&6; }
cacheid=xorg_cv_cc_flag__Werror
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
STRICT_CFLAGS="$STRICT_CFLAGS -Werror"
found="yes"
fi
fi
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -errwarn"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -errwarn" >&5
$as_echo_n "checking if $CC supports -errwarn... " >&6; }
cacheid=xorg_cv_cc_flag__errwarn
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
STRICT_CFLAGS="$STRICT_CFLAGS -errwarn"
found="yes"
fi
fi
# Earlier versions of gcc (eg: 4.2) support -Werror=attributes, but do not
# activate it with -Werror, so we add it here explicitly.
xorg_testset_save_CFLAGS="$CFLAGS"
if test "x$xorg_testset_cc_unknown_warning_option" = "x" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unknown-warning-option" >&5
$as_echo_n "checking if $CC supports -Werror=unknown-warning-option... " >&6; }
if ${xorg_cv_cc_flag_unknown_warning_option+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unknown_warning_option=yes
else
xorg_cv_cc_flag_unknown_warning_option=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unknown_warning_option" >&5
$as_echo "$xorg_cv_cc_flag_unknown_warning_option" >&6; }
xorg_testset_cc_unknown_warning_option=$xorg_cv_cc_flag_unknown_warning_option
CFLAGS="$xorg_testset_save_CFLAGS"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "x" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=unused-command-line-argument" >&5
$as_echo_n "checking if $CC supports -Werror=unused-command-line-argument... " >&6; }
if ${xorg_cv_cc_flag_unused_command_line_argument+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
xorg_cv_cc_flag_unused_command_line_argument=yes
else
xorg_cv_cc_flag_unused_command_line_argument=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_cc_flag_unused_command_line_argument" >&5
$as_echo "$xorg_cv_cc_flag_unused_command_line_argument" >&6; }
xorg_testset_cc_unused_command_line_argument=$xorg_cv_cc_flag_unused_command_line_argument
CFLAGS="$xorg_testset_save_CFLAGS"
fi
found="no"
if test $found = "no" ; then
if test "x$xorg_testset_cc_unknown_warning_option" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unknown-warning-option"
fi
if test "x$xorg_testset_cc_unused_command_line_argument" = "xyes" ; then
CFLAGS="$CFLAGS -Werror=unused-command-line-argument"
fi
CFLAGS="$CFLAGS -Werror=attributes"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC supports -Werror=attributes" >&5
$as_echo_n "checking if $CC supports -Werror=attributes... " >&6; }
cacheid=xorg_cv_cc_flag__Werror_attributes
if eval \${$cacheid+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int i;
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
eval $cacheid=yes
else
eval $cacheid=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
CFLAGS="$xorg_testset_save_CFLAGS"
eval supported=\$$cacheid
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $supported" >&5
$as_echo "$supported" >&6; }
if test "$supported" = "yes" ; then
STRICT_CFLAGS="$STRICT_CFLAGS -Werror=attributes"
found="yes"
fi
fi
if test "x$STRICT_COMPILE" = "xyes"; then
BASE_CFLAGS="$BASE_CFLAGS $STRICT_CFLAGS"
CWARNFLAGS="$CWARNFLAGS $STRICT_CFLAGS"
fi
cat >>confdefs.h <<_ACEOF
#define PACKAGE_VERSION_MAJOR `echo $PACKAGE_VERSION | cut -d . -f 1`
_ACEOF
PVM=`echo $PACKAGE_VERSION | cut -d . -f 2 | cut -d - -f 1`
if test "x$PVM" = "x"; then
PVM="0"
fi
cat >>confdefs.h <<_ACEOF
#define PACKAGE_VERSION_MINOR $PVM
_ACEOF
PVP=`echo $PACKAGE_VERSION | cut -d . -f 3 | cut -d - -f 1`
if test "x$PVP" = "x"; then
PVP="0"
fi
cat >>confdefs.h <<_ACEOF
#define PACKAGE_VERSION_PATCHLEVEL $PVP
_ACEOF
CHANGELOG_CMD="(GIT_DIR=\$(top_srcdir)/.git git log > \$(top_srcdir)/.changelog.tmp && \
mv \$(top_srcdir)/.changelog.tmp \$(top_srcdir)/ChangeLog) \
|| (rm -f \$(top_srcdir)/.changelog.tmp; touch \$(top_srcdir)/ChangeLog; \
echo 'git directory not found: installing possibly empty changelog.' >&2)"
macros_datadir=`$PKG_CONFIG --print-errors --variable=pkgdatadir xorg-macros`
INSTALL_CMD="(cp -f "$macros_datadir/INSTALL" \$(top_srcdir)/.INSTALL.tmp && \
mv \$(top_srcdir)/.INSTALL.tmp \$(top_srcdir)/INSTALL) \
|| (rm -f \$(top_srcdir)/.INSTALL.tmp; touch \$(top_srcdir)/INSTALL; \
echo 'util-macros \"pkgdatadir\" from xorg-macros.pc not found: installing possibly empty INSTALL.' >&2)"
if test x$APP_MAN_SUFFIX = x ; then
APP_MAN_SUFFIX=1
fi
if test x$APP_MAN_DIR = x ; then
APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)'
fi
if test x$LIB_MAN_SUFFIX = x ; then
LIB_MAN_SUFFIX=3
fi
if test x$LIB_MAN_DIR = x ; then
LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)'
fi
if test x$FILE_MAN_SUFFIX = x ; then
case $host_os in
solaris*) FILE_MAN_SUFFIX=4 ;;
*) FILE_MAN_SUFFIX=5 ;;
esac
fi
if test x$FILE_MAN_DIR = x ; then
FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)'
fi
if test x$MISC_MAN_SUFFIX = x ; then
case $host_os in
solaris*) MISC_MAN_SUFFIX=5 ;;
*) MISC_MAN_SUFFIX=7 ;;
esac
fi
if test x$MISC_MAN_DIR = x ; then
MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)'
fi
if test x$DRIVER_MAN_SUFFIX = x ; then
case $host_os in
solaris*) DRIVER_MAN_SUFFIX=7 ;;
*) DRIVER_MAN_SUFFIX=4 ;;
esac
fi
if test x$DRIVER_MAN_DIR = x ; then
DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)'
fi
if test x$ADMIN_MAN_SUFFIX = x ; then
case $host_os in
solaris*) ADMIN_MAN_SUFFIX=1m ;;
*) ADMIN_MAN_SUFFIX=8 ;;
esac
fi
if test x$ADMIN_MAN_DIR = x ; then
ADMIN_MAN_DIR='$(mandir)/man$(ADMIN_MAN_SUFFIX)'
fi
XORG_MAN_PAGE="X Version 11"
MAN_SUBSTS="\
-e 's|__vendorversion__|\"\$(PACKAGE_STRING)\" \"\$(XORG_MAN_PAGE)\"|' \
-e 's|__xorgversion__|\"\$(PACKAGE_STRING)\" \"\$(XORG_MAN_PAGE)\"|' \
-e 's|__xservername__|Xorg|g' \
-e 's|__xconfigfile__|xorg.conf|g' \
-e 's|__projectroot__|\$(prefix)|g' \
-e 's|__apploaddir__|\$(appdefaultdir)|g' \
-e 's|__appmansuffix__|\$(APP_MAN_SUFFIX)|g' \
-e 's|__drivermansuffix__|\$(DRIVER_MAN_SUFFIX)|g' \
-e 's|__adminmansuffix__|\$(ADMIN_MAN_SUFFIX)|g' \
-e 's|__libmansuffix__|\$(LIB_MAN_SUFFIX)|g' \
-e 's|__miscmansuffix__|\$(MISC_MAN_SUFFIX)|g' \
-e 's|__filemansuffix__|\$(FILE_MAN_SUFFIX)|g'"
# Check whether --enable-silent-rules was given.
if test "${enable_silent_rules+set}" = set; then :
enableval=$enable_silent_rules;
fi
case $enable_silent_rules in # (((
yes) AM_DEFAULT_VERBOSITY=0;;
no) AM_DEFAULT_VERBOSITY=1;;
*) AM_DEFAULT_VERBOSITY=0;;
esac
am_make=${MAKE-make}
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
if ${am_cv_make_support_nested_variables+:} false; then :
$as_echo_n "(cached) " >&6
else
if $as_echo 'TRUE=$(BAR$(V))
BAR0=false
BAR1=true
V=1
am__doit:
@$(TRUE)
.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
am_cv_make_support_nested_variables=yes
else
am_cv_make_support_nested_variables=no
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
$as_echo "$am_cv_make_support_nested_variables" >&6; }
if test $am_cv_make_support_nested_variables = yes; then
AM_V='$(V)'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
else
AM_V=$AM_DEFAULT_VERBOSITY
AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
fi
AM_BACKSLASH='\'
# Initialize libtool
# Check whether --enable-static was given.
if test "${enable_static+set}" = set; then :
enableval=$enable_static; p=${PACKAGE-default}
case $enableval in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
for pkg in $enableval; do
IFS="$lt_save_ifs"
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS="$lt_save_ifs"
;;
esac
else
enable_static=no
fi
case `pwd` in
*\ * | *\ *)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
esac
macro_version='2.4.2'
macro_revision='1.3337'
ltmain="$ac_aux_dir/ltmain.sh"
# Backslashify metacharacters that are still active within
# double-quoted strings.
sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
# Same as above, but do not quote variable references.
double_quote_subst='s/\(["`\\]\)/\\\1/g'
# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
# Sed substitution to delay expansion of an escaped single quote.
delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
# Sed substitution to avoid accidental globbing in evaled expressions
no_glob_subst='s/\*/\\\*/g'
ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
$as_echo_n "checking how to print strings... " >&6; }
# Test print first, because it will be a builtin if present.
if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
ECHO='print -r --'
elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
ECHO='printf %s\n'
else
# Use this function as a fallback that always works.
func_fallback_echo ()
{
eval 'cat <<_LTECHO_EOF
$1
_LTECHO_EOF'
}
ECHO='func_fallback_echo'
fi
# func_echo_all arg...
# Invoke $ECHO with all args, space-separated.
func_echo_all ()
{
$ECHO ""
}
case "$ECHO" in
printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
$as_echo "printf" >&6; } ;;
print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
$as_echo "print -r" >&6; } ;;
*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
$as_echo "cat" >&6; } ;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
$as_echo_n "checking for a sed that does not truncate output... " >&6; }
if ${ac_cv_path_SED+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
for ac_i in 1 2 3 4 5 6 7; do
ac_script="$ac_script$as_nl$ac_script"
done
echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
{ ac_script=; unset ac_script;}
if test -z "$SED"; then
ac_path_SED_found=false
# Loop through the user's path and test for each of PROGNAME-LIST
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_prog in sed gsed; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
as_fn_executable_p "$ac_path_SED" || continue
# Check for GNU ac_path_SED and select it if it is found.
# Check for GNU $ac_path_SED
case `"$ac_path_SED" --version 2>&1` in
*GNU*)
ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
*)
ac_count=0
$as_echo_n 0123456789 >"conftest.in"
while :
do
cat "conftest.in" "conftest.in" >"conftest.tmp"
mv "conftest.tmp" "conftest.in"
cp "conftest.in" "conftest.nl"
$as_echo '' >> "conftest.nl"
"$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
as_fn_arith $ac_count + 1 && ac_count=$as_val
if test $ac_count -gt ${ac_path_SED_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_SED="$ac_path_SED"
ac_path_SED_max=$ac_count
fi
# 10*(2^10) chars as input seems more than enough
test $ac_count -gt 10 && break
done
rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
esac
$ac_path_SED_found && break 3
done
done
done
IFS=$as_save_IFS
if test -z "$ac_cv_path_SED"; then
as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
fi
else
ac_cv_path_SED=$SED
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
$as_echo "$ac_cv_path_SED" >&6; }
SED="$ac_cv_path_SED"
rm -f conftest.sed
test -z "$SED" && SED=sed
Xsed="$SED -e 1s/^X//"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
$as_echo_n "checking for fgrep... " >&6; }
if ${ac_cv_path_FGREP+:} false; then :
$as_echo_n "(cached) " >&6
else
if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
then ac_cv_path_FGREP="$GREP -F"
else
if test -z "$FGREP"; then
ac_path_FGREP_found=false
# Loop through the user's path and test for each of PROGNAME-LIST
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_prog in fgrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
as_fn_executable_p "$ac_path_FGREP" || continue
# Check for GNU ac_path_FGREP and select it if it is found.
# Check for GNU $ac_path_FGREP
case `"$ac_path_FGREP" --version 2>&1` in
*GNU*)
ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
*)
ac_count=0
$as_echo_n 0123456789 >"conftest.in"
while :
do
cat "conftest.in" "conftest.in" >"conftest.tmp"
mv "conftest.tmp" "conftest.in"
cp "conftest.in" "conftest.nl"
$as_echo 'FGREP' >> "conftest.nl"
"$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
as_fn_arith $ac_count + 1 && ac_count=$as_val
if test $ac_count -gt ${ac_path_FGREP_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_FGREP="$ac_path_FGREP"
ac_path_FGREP_max=$ac_count
fi
# 10*(2^10) chars as input seems more than enough
test $ac_count -gt 10 && break
done
rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
esac
$ac_path_FGREP_found && break 3
done
done
done
IFS=$as_save_IFS
if test -z "$ac_cv_path_FGREP"; then
as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_FGREP=$FGREP
fi
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
$as_echo "$ac_cv_path_FGREP" >&6; }
FGREP="$ac_cv_path_FGREP"
test -z "$GREP" && GREP=grep
# Check whether --with-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then :
withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
else
with_gnu_ld=no
fi
ac_prog=ld
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
$as_echo_n "checking for ld used by $CC... " >&6; }
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
case $ac_prog in
# Accept absolute paths.
[\\/]* | ?:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the pathname of ld
ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
$as_echo_n "checking for GNU ld... " >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
$as_echo_n "checking for non-GNU ld... " >&6; }
fi
if ${lt_cv_path_LD+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -z "$LD"; then
lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
IFS="$lt_save_ifs"
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 &5
$as_echo "$LD" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
if ${lt_cv_prog_gnu_ld+:} false; then :
$as_echo_n "(cached) " >&6
else
# I'd rather use --version here, but apparently some GNU lds only accept -v.
case `$LD -v 2>&1 &5
$as_echo "$lt_cv_prog_gnu_ld" >&6; }
with_gnu_ld=$lt_cv_prog_gnu_ld
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
if ${lt_cv_path_NM+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$NM"; then
# Let the user override the test.
lt_cv_path_NM="$NM"
else
lt_nm_to_check="${ac_tool_prefix}nm"
if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
lt_nm_to_check="$lt_nm_to_check nm"
fi
for lt_tmp_nm in $lt_nm_to_check; do
lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
IFS="$lt_save_ifs"
test -z "$ac_dir" && ac_dir=.
tmp_nm="$ac_dir/$lt_tmp_nm"
if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
# Tru64's nm complains that /dev/null is an invalid object file
case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
*/dev/null* | *'Invalid file or object type'*)
lt_cv_path_NM="$tmp_nm -B"
break
;;
*)
case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
*/dev/null*)
lt_cv_path_NM="$tmp_nm -p"
break
;;
*)
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
;;
esac
;;
esac
fi
done
IFS="$lt_save_ifs"
done
: ${lt_cv_path_NM=no}
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
$as_echo "$lt_cv_path_NM" >&6; }
if test "$lt_cv_path_NM" != "no"; then
NM="$lt_cv_path_NM"
else
# Didn't find any BSD compatible name lister, look for dumpbin.
if test -n "$DUMPBIN"; then :
# Let the user override the test.
else
if test -n "$ac_tool_prefix"; then
for ac_prog in dumpbin "link -dump"
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_DUMPBIN+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$DUMPBIN"; then
ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
DUMPBIN=$ac_cv_prog_DUMPBIN
if test -n "$DUMPBIN"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
$as_echo "$DUMPBIN" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
test -n "$DUMPBIN" && break
done
fi
if test -z "$DUMPBIN"; then
ac_ct_DUMPBIN=$DUMPBIN
for ac_prog in dumpbin "link -dump"
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_DUMPBIN"; then
ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
if test -n "$ac_ct_DUMPBIN"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
$as_echo "$ac_ct_DUMPBIN" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
test -n "$ac_ct_DUMPBIN" && break
done
if test "x$ac_ct_DUMPBIN" = x; then
DUMPBIN=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
DUMPBIN=$ac_ct_DUMPBIN
fi
fi
case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
*COFF*)
DUMPBIN="$DUMPBIN -symbols"
;;
*)
DUMPBIN=:
;;
esac
fi
if test "$DUMPBIN" != ":"; then
NM="$DUMPBIN"
fi
fi
test -z "$NM" && NM=nm
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
$as_echo_n "checking the name lister ($NM) interface... " >&6; }
if ${lt_cv_nm_interface+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_nm_interface="BSD nm"
echo "int some_variable = 0;" > conftest.$ac_ext
(eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
(eval "$ac_compile" 2>conftest.err)
cat conftest.err >&5
(eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
(eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
cat conftest.err >&5
(eval echo "\"\$as_me:$LINENO: output\"" >&5)
cat conftest.out >&5
if $GREP 'External.*some_variable' conftest.out > /dev/null; then
lt_cv_nm_interface="MS dumpbin"
fi
rm -f conftest*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
$as_echo "$lt_cv_nm_interface" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
$as_echo_n "checking whether ln -s works... " >&6; }
LN_S=$as_ln_s
if test "$LN_S" = "ln -s"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
$as_echo "no, using $LN_S" >&6; }
fi
# find the maximum length of command line arguments
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
$as_echo_n "checking the maximum length of command line arguments... " >&6; }
if ${lt_cv_sys_max_cmd_len+:} false; then :
$as_echo_n "(cached) " >&6
else
i=0
teststring="ABCD"
case $build_os in
msdosdjgpp*)
# On DJGPP, this test can blow up pretty badly due to problems in libc
# (any single argument exceeding 2000 bytes causes a buffer overrun
# during glob expansion). Even if it were fixed, the result of this
# check would be larger than it should be.
lt_cv_sys_max_cmd_len=12288; # 12K is about right
;;
gnu*)
# Under GNU Hurd, this test is not required because there is
# no limit to the length of command line arguments.
# Libtool will interpret -1 as no limit whatsoever
lt_cv_sys_max_cmd_len=-1;
;;
cygwin* | mingw* | cegcc*)
# On Win9x/ME, this test blows up -- it succeeds, but takes
# about 5 minutes as the teststring grows exponentially.
# Worse, since 9x/ME are not pre-emptively multitasking,
# you end up with a "frozen" computer, even though with patience
# the test eventually succeeds (with a max line length of 256k).
# Instead, let's just punt: use the minimum linelength reported by
# all of the supported platforms: 8192 (on NT/2K/XP).
lt_cv_sys_max_cmd_len=8192;
;;
mint*)
# On MiNT this can take a long time and run out of memory.
lt_cv_sys_max_cmd_len=8192;
;;
amigaos*)
# On AmigaOS with pdksh, this test takes hours, literally.
# So we just punt and use a minimum line length of 8192.
lt_cv_sys_max_cmd_len=8192;
;;
netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
# This has been around since 386BSD, at least. Likely further.
if test -x /sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
elif test -x /usr/sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
else
lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
fi
# And add a safety zone
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
;;
interix*)
# We know the value 262144 and hardcode it with a safety zone (like BSD)
lt_cv_sys_max_cmd_len=196608
;;
os2*)
# The test takes a long time on OS/2.
lt_cv_sys_max_cmd_len=8192
;;
osf*)
# Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
# due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
# nice to cause kernel panics so lets avoid the loop below.
# First set a reasonable default.
lt_cv_sys_max_cmd_len=16384
#
if test -x /sbin/sysconfig; then
case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
*1*) lt_cv_sys_max_cmd_len=-1 ;;
esac
fi
;;
sco3.2v5*)
lt_cv_sys_max_cmd_len=102400
;;
sysv5* | sco5v6* | sysv4.2uw2*)
kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
if test -n "$kargmax"; then
lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
else
lt_cv_sys_max_cmd_len=32768
fi
;;
*)
lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
if test -n "$lt_cv_sys_max_cmd_len" && \
test undefined != "$lt_cv_sys_max_cmd_len"; then
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
# Make teststring a little bigger before we do anything with it.
# a 1K string should be a reasonable start.
for i in 1 2 3 4 5 6 7 8 ; do
teststring=$teststring$teststring
done
SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
= "X$teststring$teststring"; } >/dev/null 2>&1 &&
test $i != 17 # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
done
# Only check the string length outside the loop.
lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
teststring=
# Add a significant safety factor because C++ compilers can tack on
# massive amounts of additional arguments before passing them to the
# linker. It appears as though 1/2 is a usable value.
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
fi
;;
esac
fi
if test -n $lt_cv_sys_max_cmd_len ; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
$as_echo "none" >&6; }
fi
max_cmd_len=$lt_cv_sys_max_cmd_len
: ${CP="cp -f"}
: ${MV="mv -f"}
: ${RM="rm -f"}
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
# Try some XSI features
xsi_shell=no
( _lt_dummy="a/b/c"
test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
= c,a/b,b/c, \
&& eval 'test $(( 1 + 1 )) -eq 2 \
&& test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
&& xsi_shell=yes
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
$as_echo "$xsi_shell" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
lt_shell_append=no
( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
>/dev/null 2>&1 \
&& lt_shell_append=yes
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
$as_echo "$lt_shell_append" >&6; }
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
lt_unset=unset
else
lt_unset=false
fi
# test EBCDIC or ASCII
case `echo X|tr X '\101'` in
A) # ASCII based system
# \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
lt_SP2NL='tr \040 \012'
lt_NL2SP='tr \015\012 \040\040'
;;
*) # EBCDIC based system
lt_SP2NL='tr \100 \n'
lt_NL2SP='tr \r\n \100\100'
;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
if ${lt_cv_to_host_file_cmd+:} false; then :
$as_echo_n "(cached) " >&6
else
case $host in
*-*-mingw* )
case $build in
*-*-mingw* ) # actually msys
lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
;;
*-*-cygwin* )
lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
;;
* ) # otherwise, assume *nix
lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
;;
esac
;;
*-*-cygwin* )
case $build in
*-*-mingw* ) # actually msys
lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
;;
*-*-cygwin* )
lt_cv_to_host_file_cmd=func_convert_file_noop
;;
* ) # otherwise, assume *nix
lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
;;
esac
;;
* ) # unhandled hosts (and "normal" native builds)
lt_cv_to_host_file_cmd=func_convert_file_noop
;;
esac
fi
to_host_file_cmd=$lt_cv_to_host_file_cmd
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
$as_echo "$lt_cv_to_host_file_cmd" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
if ${lt_cv_to_tool_file_cmd+:} false; then :
$as_echo_n "(cached) " >&6
else
#assume ordinary cross tools, or native build.
lt_cv_to_tool_file_cmd=func_convert_file_noop
case $host in
*-*-mingw* )
case $build in
*-*-mingw* ) # actually msys
lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
;;
esac
;;
esac
fi
to_tool_file_cmd=$lt_cv_to_tool_file_cmd
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
$as_echo_n "checking for $LD option to reload object files... " >&6; }
if ${lt_cv_ld_reload_flag+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_ld_reload_flag='-r'
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
$as_echo "$lt_cv_ld_reload_flag" >&6; }
reload_flag=$lt_cv_ld_reload_flag
case $reload_flag in
"" | " "*) ;;
*) reload_flag=" $reload_flag" ;;
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
if test "$GCC" != yes; then
reload_cmds=false
fi
;;
darwin*)
if test "$GCC" = yes; then
reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
else
reload_cmds='$LD$reload_flag -o $output$reload_objs'
fi
;;
esac
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
set dummy ${ac_tool_prefix}objdump; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_OBJDUMP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$OBJDUMP"; then
ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
OBJDUMP=$ac_cv_prog_OBJDUMP
if test -n "$OBJDUMP"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
$as_echo "$OBJDUMP" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_OBJDUMP"; then
ac_ct_OBJDUMP=$OBJDUMP
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_OBJDUMP"; then
ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_OBJDUMP="objdump"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
if test -n "$ac_ct_OBJDUMP"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
$as_echo "$ac_ct_OBJDUMP" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_OBJDUMP" = x; then
OBJDUMP="false"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
OBJDUMP=$ac_ct_OBJDUMP
fi
else
OBJDUMP="$ac_cv_prog_OBJDUMP"
fi
test -z "$OBJDUMP" && OBJDUMP=objdump
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
$as_echo_n "checking how to recognize dependent libraries... " >&6; }
if ${lt_cv_deplibs_check_method+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# `unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
# which responds to the $file_magic_cmd with a given extended regex.
# If you have `file' or equivalent on your system and you're not sure
# whether `pass_all' will *always* work, you probably want this one.
case $host_os in
aix[4-9]*)
lt_cv_deplibs_check_method=pass_all
;;
beos*)
lt_cv_deplibs_check_method=pass_all
;;
bsdi[45]*)
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
lt_cv_file_magic_cmd='/usr/bin/file -L'
lt_cv_file_magic_test_file=/shlib/libc.so
;;
cygwin*)
# func_win32_libid is a shell function defined in ltmain.sh
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
;;
mingw* | pw32*)
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
# func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
# Keep this pattern in sync with the one in func_win32_libid.
lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
lt_cv_file_magic_cmd='$OBJDUMP -f'
fi
;;
cegcc*)
# use the weaker test based on 'objdump'. See mingw*.
lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
;;
darwin* | rhapsody*)
lt_cv_deplibs_check_method=pass_all
;;
freebsd* | dragonfly*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
case $host_cpu in
i*86 )
# Not sure whether the presence of OpenBSD here was a mistake.
# Let's accept both of them until this is cleared up.
lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
esac
else
lt_cv_deplibs_check_method=pass_all
fi
;;
haiku*)
lt_cv_deplibs_check_method=pass_all
;;
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
case $host_cpu in
ia64*)
lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
;;
hppa*64*)
lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
;;
*)
lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
lt_cv_file_magic_test_file=/usr/lib/libc.sl
;;
esac
;;
interix[3-9]*)
# PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
;;
irix5* | irix6* | nonstopux*)
case $LD in
*-32|*"-32 ") libmagic=32-bit;;
*-n32|*"-n32 ") libmagic=N32;;
*-64|*"-64 ") libmagic=64-bit;;
*) libmagic=never-match;;
esac
lt_cv_deplibs_check_method=pass_all
;;
# This must be glibc/ELF.
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
lt_cv_deplibs_check_method=pass_all
;;
netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
fi
;;
newos6*)
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=/usr/lib/libnls.so
;;
*nto* | *qnx*)
lt_cv_deplibs_check_method=pass_all
;;
openbsd*)
if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
fi
;;
osf3* | osf4* | osf5*)
lt_cv_deplibs_check_method=pass_all
;;
rdos*)
lt_cv_deplibs_check_method=pass_all
;;
solaris*)
lt_cv_deplibs_check_method=pass_all
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
lt_cv_deplibs_check_method=pass_all
;;
sysv4 | sysv4.3*)
case $host_vendor in
motorola)
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
;;
ncr)
lt_cv_deplibs_check_method=pass_all
;;
sequent)
lt_cv_file_magic_cmd='/bin/file'
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
;;
sni)
lt_cv_file_magic_cmd='/bin/file'
lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
lt_cv_file_magic_test_file=/lib/libc.so
;;
siemens)
lt_cv_deplibs_check_method=pass_all
;;
pc)
lt_cv_deplibs_check_method=pass_all
;;
esac
;;
tpf*)
lt_cv_deplibs_check_method=pass_all
;;
esac
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
$as_echo "$lt_cv_deplibs_check_method" >&6; }
file_magic_glob=
want_nocaseglob=no
if test "$build" = "$host"; then
case $host_os in
mingw* | pw32*)
if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
want_nocaseglob=yes
else
file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
fi
;;
esac
fi
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ac_tool_prefix}dlltool; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_DLLTOOL+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$DLLTOOL"; then
ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
DLLTOOL=$ac_cv_prog_DLLTOOL
if test -n "$DLLTOOL"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
$as_echo "$DLLTOOL" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_DLLTOOL"; then
ac_ct_DLLTOOL=$DLLTOOL
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_DLLTOOL"; then
ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_DLLTOOL="dlltool"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
if test -n "$ac_ct_DLLTOOL"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
$as_echo "$ac_ct_DLLTOOL" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_DLLTOOL" = x; then
DLLTOOL="false"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
DLLTOOL=$ac_ct_DLLTOOL
fi
else
DLLTOOL="$ac_cv_prog_DLLTOOL"
fi
test -z "$DLLTOOL" && DLLTOOL=dlltool
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_sharedlib_from_linklib_cmd='unknown'
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
# two different shell functions defined in ltmain.sh
# decide which to use based on capabilities of $DLLTOOL
case `$DLLTOOL --help 2>&1` in
*--identify-strict*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
;;
*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
;;
esac
;;
*)
# fallback: assume linklib IS sharedlib
lt_cv_sharedlib_from_linklib_cmd="$ECHO"
;;
esac
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
if test -n "$ac_tool_prefix"; then
for ac_prog in ar
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_AR+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$AR"; then
ac_cv_prog_AR="$AR" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
AR=$ac_cv_prog_AR
if test -n "$AR"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
$as_echo "$AR" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
test -n "$AR" && break
done
fi
if test -z "$AR"; then
ac_ct_AR=$AR
for ac_prog in ar
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_AR+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_AR"; then
ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_AR="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_AR=$ac_cv_prog_ac_ct_AR
if test -n "$ac_ct_AR"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
$as_echo "$ac_ct_AR" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
test -n "$ac_ct_AR" && break
done
if test "x$ac_ct_AR" = x; then
AR="false"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
AR=$ac_ct_AR
fi
fi
: ${AR=ar}
: ${AR_FLAGS=cru}
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
$as_echo_n "checking for archiver @FILE support... " >&6; }
if ${lt_cv_ar_at_file+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_ar_at_file=no
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
echo conftest.$ac_objext > conftest.lst
lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
(eval $lt_ar_try) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
if test "$ac_status" -eq 0; then
# Ensure the archiver fails upon bogus file names.
rm -f conftest.$ac_objext libconftest.a
{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
(eval $lt_ar_try) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
if test "$ac_status" -ne 0; then
lt_cv_ar_at_file=@
fi
fi
rm -f conftest.* libconftest.a
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
$as_echo "$lt_cv_ar_at_file" >&6; }
if test "x$lt_cv_ar_at_file" = xno; then
archiver_list_spec=
else
archiver_list_spec=$lt_cv_ar_at_file
fi
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$STRIP"; then
ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
STRIP=$ac_cv_prog_STRIP
if test -n "$STRIP"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
$as_echo "$STRIP" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_STRIP"; then
ac_ct_STRIP=$STRIP
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_STRIP"; then
ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_STRIP="strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
if test -n "$ac_ct_STRIP"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
$as_echo "$ac_ct_STRIP" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_STRIP" = x; then
STRIP=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
STRIP=$ac_ct_STRIP
fi
else
STRIP="$ac_cv_prog_STRIP"
fi
test -z "$STRIP" && STRIP=:
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_RANLIB+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
RANLIB=$ac_cv_prog_RANLIB
if test -n "$RANLIB"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
$as_echo "$RANLIB" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_RANLIB"; then
ac_ct_RANLIB=$RANLIB
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_RANLIB"; then
ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_RANLIB="ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
if test -n "$ac_ct_RANLIB"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
$as_echo "$ac_ct_RANLIB" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_RANLIB" = x; then
RANLIB=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
RANLIB=$ac_ct_RANLIB
fi
else
RANLIB="$ac_cv_prog_RANLIB"
fi
test -z "$RANLIB" && RANLIB=:
# Determine commands to create old-style static archives.
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=
if test -n "$RANLIB"; then
case $host_os in
openbsd*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
;;
*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
;;
esac
old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
fi
case $host_os in
darwin*)
lock_old_archive_extraction=yes ;;
*)
lock_old_archive_extraction=no ;;
esac
# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}
# If no C compiler flags were specified, use CFLAGS.
LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
# Allow CC to be a program name with arguments.
compiler=$CC
# Check for command to grab the raw symbol name followed by C symbol from nm.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
if ${lt_cv_sys_global_symbol_pipe+:} false; then :
$as_echo_n "(cached) " >&6
else
# These are sane defaults that work on at least a few old systems.
# [They come from Ultrix. What could be older than Ultrix?!! ;)]
# Character class describing NM global symbol codes.
symcode='[BCDEGRST]'
# Regexp to match symbols that can be accessed directly from C.
sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
# Define system-specific variables.
case $host_os in
aix*)
symcode='[BCDT]'
;;
cygwin* | mingw* | pw32* | cegcc*)
symcode='[ABCDGISTW]'
;;
hpux*)
if test "$host_cpu" = ia64; then
symcode='[ABCDEGRST]'
fi
;;
irix* | nonstopux*)
symcode='[BCDEGRST]'
;;
osf*)
symcode='[BCDEGQRST]'
;;
solaris*)
symcode='[BDRT]'
;;
sco3.2v5*)
symcode='[DT]'
;;
sysv4.2uw2*)
symcode='[DT]'
;;
sysv5* | sco5v6* | unixware* | OpenUNIX*)
symcode='[ABDT]'
;;
sysv4)
symcode='[DFNSTU]'
;;
esac
# If we're using GNU nm, then use its standard symbol codes.
case `$NM -V 2>&1` in
*GNU* | *'with BFD'*)
symcode='[ABCDGIRSTW]' ;;
esac
# Transform an extracted symbol line into a proper C declaration.
# Some systems (esp. on ia64) link data and code symbols differently,
# so use this general approach.
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
# Handle CRLF in mingw tool chain
opt_cr=
case $build_os in
mingw*)
opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
;;
esac
# Try without a prefix underscore, then with it.
for ac_symprfx in "" "_"; do
# Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
symxfrm="\\1 $ac_symprfx\\2 \\2"
# Write the raw and C identifiers.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
# Fake it for dumpbin and say T for any non-static function
# and D for any global variable.
# Also find C++ and __fastcall symbols from MSVC++,
# which start with @ or ?.
lt_cv_sys_global_symbol_pipe="$AWK '"\
" {last_section=section; section=\$ 3};"\
" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
" \$ 0!~/External *\|/{next};"\
" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
" {if(hide[section]) next};"\
" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
" s[1]~/^[@?]/{print s[1], s[1]; next};"\
" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
" ' prfx=^$ac_symprfx"
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
fi
lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
# Check to see that the pipe works correctly.
pipe_works=no
rm -f conftest*
cat > conftest.$ac_ext <<_LT_EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(void);
void nm_test_func(void){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func();return(0);}
_LT_EOF
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
# Now try to grab the symbols.
nlist=conftest.nm
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
(eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; } && test -s "$nlist"; then
# Try sorting and uniquifying the output.
if sort "$nlist" | uniq > "$nlist"T; then
mv -f "$nlist"T "$nlist"
else
rm -f "$nlist"T
fi
# Make sure that we snagged all the symbols we need.
if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
/* DATA imports from DLLs on WIN32 con't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT_DLSYM_CONST
#elif defined(__osf__)
/* This system does not cope well with relocations in const data. */
# define LT_DLSYM_CONST
#else
# define LT_DLSYM_CONST const
#endif
#ifdef __cplusplus
extern "C" {
#endif
_LT_EOF
# Now generate the symbol file.
eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
cat <<_LT_EOF >> conftest.$ac_ext
/* The mapping between symbol names and symbols. */
LT_DLSYM_CONST struct {
const char *name;
void *address;
}
lt__PROGRAM__LTX_preloaded_symbols[] =
{
{ "@PROGRAM@", (void *) 0 },
_LT_EOF
$SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
cat <<\_LT_EOF >> conftest.$ac_ext
{0, (void *) 0}
};
/* This works around a problem in FreeBSD linker */
#ifdef FREEBSD_WORKAROUND
static const void *lt_preloaded_setup() {
return lt__PROGRAM__LTX_preloaded_symbols;
}
#endif
#ifdef __cplusplus
}
#endif
_LT_EOF
# Now try linking the two files.
mv conftest.$ac_objext conftstm.$ac_objext
lt_globsym_save_LIBS=$LIBS
lt_globsym_save_CFLAGS=$CFLAGS
LIBS="conftstm.$ac_objext"
CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; } && test -s conftest${ac_exeext}; then
pipe_works=yes
fi
LIBS=$lt_globsym_save_LIBS
CFLAGS=$lt_globsym_save_CFLAGS
else
echo "cannot find nm_test_func in $nlist" >&5
fi
else
echo "cannot find nm_test_var in $nlist" >&5
fi
else
echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
fi
else
echo "$progname: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -rf conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
if test "$pipe_works" = yes; then
break
else
lt_cv_sys_global_symbol_pipe=
fi
done
fi
if test -z "$lt_cv_sys_global_symbol_pipe"; then
lt_cv_sys_global_symbol_to_cdecl=
fi
if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
$as_echo "failed" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
fi
# Response file support.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
nm_file_list_spec='@'
elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
nm_file_list_spec='@'
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
$as_echo_n "checking for sysroot... " >&6; }
# Check whether --with-sysroot was given.
if test "${with_sysroot+set}" = set; then :
withval=$with_sysroot;
else
with_sysroot=no
fi
lt_sysroot=
case ${with_sysroot} in #(
yes)
if test "$GCC" = yes; then
lt_sysroot=`$CC --print-sysroot 2>/dev/null`
fi
;; #(
/*)
lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
;; #(
no|'')
;; #(
*)
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
$as_echo "${with_sysroot}" >&6; }
as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
$as_echo "${lt_sysroot:-no}" >&6; }
# Check whether --enable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then :
enableval=$enable_libtool_lock;
fi
test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
case `/usr/bin/file conftest.$ac_objext` in
*ELF-32*)
HPUX_IA64_MODE="32"
;;
*ELF-64*)
HPUX_IA64_MODE="64"
;;
esac
fi
rm -rf conftest*
;;
*-*-irix6*)
# Find out which ABI we are using.
echo '#line '$LINENO' "configure"' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
if test "$lt_cv_prog_gnu_ld" = yes; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -melf32bsmip"
;;
*N32*)
LD="${LD-ld} -melf32bmipn32"
;;
*64-bit*)
LD="${LD-ld} -melf64bmip"
;;
esac
else
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
fi
rm -rf conftest*
;;
x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
case `/usr/bin/file conftest.o` in
*32-bit*)
case $host in
x86_64-*kfreebsd*-gnu)
LD="${LD-ld} -m elf_i386_fbsd"
;;
x86_64-*linux*)
case `/usr/bin/file conftest.o` in
*x86-64*)
LD="${LD-ld} -m elf32_x86_64"
;;
*)
LD="${LD-ld} -m elf_i386"
;;
esac
;;
powerpc64le-*)
LD="${LD-ld} -m elf32lppclinux"
;;
powerpc64-*)
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
LD="${LD-ld} -m elf_s390"
;;
sparc64-*linux*)
LD="${LD-ld} -m elf32_sparc"
;;
esac
;;
*64-bit*)
case $host in
x86_64-*kfreebsd*-gnu)
LD="${LD-ld} -m elf_x86_64_fbsd"
;;
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
powerpcle-*)
LD="${LD-ld} -m elf64lppc"
;;
powerpc-*)
LD="${LD-ld} -m elf64ppc"
;;
s390*-*linux*|s390*-*tpf*)
LD="${LD-ld} -m elf64_s390"
;;
sparc*-*linux*)
LD="${LD-ld} -m elf64_sparc"
;;
esac
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
if ${lt_cv_cc_needs_belf+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
lt_cv_cc_needs_belf=yes
else
lt_cv_cc_needs_belf=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
$as_echo "$lt_cv_cc_needs_belf" >&6; }
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS="$SAVE_CFLAGS"
fi
;;
*-*solaris*)
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
case `/usr/bin/file conftest.o` in
*64-bit*)
case $lt_cv_prog_gnu_ld in
yes*)
case $host in
i?86-*-solaris*)
LD="${LD-ld} -m elf_x86_64"
;;
sparc*-*-solaris*)
LD="${LD-ld} -m elf64_sparc"
;;
esac
# GNU ld 2.21 introduced _sol2 emulations. Use them if available.
if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
LD="${LD-ld}_sol2"
fi
;;
*)
if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
LD="${LD-ld} -64"
fi
;;
esac
;;
esac
fi
rm -rf conftest*
;;
esac
need_locks="$enable_libtool_lock"
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
set dummy ${ac_tool_prefix}mt; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$MANIFEST_TOOL"; then
ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
if test -n "$MANIFEST_TOOL"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
$as_echo "$MANIFEST_TOOL" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
# Extract the first word of "mt", so it can be a program name with args.
set dummy mt; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_MANIFEST_TOOL"; then
ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
if test -n "$ac_ct_MANIFEST_TOOL"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_MANIFEST_TOOL" = x; then
MANIFEST_TOOL=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
fi
else
MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
fi
test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
if ${lt_cv_path_mainfest_tool+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_path_mainfest_tool=no
echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
$MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
cat conftest.err >&5
if $GREP 'Manifest Tool' conftest.out > /dev/null; then
lt_cv_path_mainfest_tool=yes
fi
rm -f conftest*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
$as_echo "$lt_cv_path_mainfest_tool" >&6; }
if test "x$lt_cv_path_mainfest_tool" != xyes; then
MANIFEST_TOOL=:
fi
case $host_os in
rhapsody* | darwin*)
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_DSYMUTIL+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$DSYMUTIL"; then
ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
DSYMUTIL=$ac_cv_prog_DSYMUTIL
if test -n "$DSYMUTIL"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
$as_echo "$DSYMUTIL" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_DSYMUTIL"; then
ac_ct_DSYMUTIL=$DSYMUTIL
# Extract the first word of "dsymutil", so it can be a program name with args.
set dummy dsymutil; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_DSYMUTIL"; then
ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
if test -n "$ac_ct_DSYMUTIL"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
$as_echo "$ac_ct_DSYMUTIL" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_DSYMUTIL" = x; then
DSYMUTIL=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
DSYMUTIL=$ac_ct_DSYMUTIL
fi
else
DSYMUTIL="$ac_cv_prog_DSYMUTIL"
fi
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
set dummy ${ac_tool_prefix}nmedit; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_NMEDIT+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$NMEDIT"; then
ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
NMEDIT=$ac_cv_prog_NMEDIT
if test -n "$NMEDIT"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
$as_echo "$NMEDIT" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_NMEDIT"; then
ac_ct_NMEDIT=$NMEDIT
# Extract the first word of "nmedit", so it can be a program name with args.
set dummy nmedit; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_NMEDIT"; then
ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_NMEDIT="nmedit"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
if test -n "$ac_ct_NMEDIT"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
$as_echo "$ac_ct_NMEDIT" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_NMEDIT" = x; then
NMEDIT=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
NMEDIT=$ac_ct_NMEDIT
fi
else
NMEDIT="$ac_cv_prog_NMEDIT"
fi
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
set dummy ${ac_tool_prefix}lipo; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_LIPO+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$LIPO"; then
ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
LIPO=$ac_cv_prog_LIPO
if test -n "$LIPO"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
$as_echo "$LIPO" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_LIPO"; then
ac_ct_LIPO=$LIPO
# Extract the first word of "lipo", so it can be a program name with args.
set dummy lipo; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_LIPO"; then
ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_LIPO="lipo"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
if test -n "$ac_ct_LIPO"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
$as_echo "$ac_ct_LIPO" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_LIPO" = x; then
LIPO=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
LIPO=$ac_ct_LIPO
fi
else
LIPO="$ac_cv_prog_LIPO"
fi
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
set dummy ${ac_tool_prefix}otool; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_OTOOL+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$OTOOL"; then
ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
OTOOL=$ac_cv_prog_OTOOL
if test -n "$OTOOL"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
$as_echo "$OTOOL" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_OTOOL"; then
ac_ct_OTOOL=$OTOOL
# Extract the first word of "otool", so it can be a program name with args.
set dummy otool; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_OTOOL"; then
ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_OTOOL="otool"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
if test -n "$ac_ct_OTOOL"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
$as_echo "$ac_ct_OTOOL" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_OTOOL" = x; then
OTOOL=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
OTOOL=$ac_ct_OTOOL
fi
else
OTOOL="$ac_cv_prog_OTOOL"
fi
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
set dummy ${ac_tool_prefix}otool64; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_OTOOL64+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$OTOOL64"; then
ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
OTOOL64=$ac_cv_prog_OTOOL64
if test -n "$OTOOL64"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
$as_echo "$OTOOL64" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_OTOOL64"; then
ac_ct_OTOOL64=$OTOOL64
# Extract the first word of "otool64", so it can be a program name with args.
set dummy otool64; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_OTOOL64"; then
ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_OTOOL64="otool64"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
if test -n "$ac_ct_OTOOL64"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
$as_echo "$ac_ct_OTOOL64" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_OTOOL64" = x; then
OTOOL64=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
OTOOL64=$ac_ct_OTOOL64
fi
else
OTOOL64="$ac_cv_prog_OTOOL64"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
$as_echo_n "checking for -single_module linker flag... " >&6; }
if ${lt_cv_apple_cc_single_mod+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_apple_cc_single_mod=no
if test -z "${LT_MULTI_MODULE}"; then
# By default we will add the -single_module flag. You can override
# by either setting the environment variable LT_MULTI_MODULE
# non-empty at configure time, or by adding -multi_module to the
# link flags.
rm -rf libconftest.dylib*
echo "int foo(void){return 1;}" > conftest.c
echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-dynamiclib -Wl,-single_module conftest.c" >&5
$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-dynamiclib -Wl,-single_module conftest.c 2>conftest.err
_lt_result=$?
# If there is a non-empty error log, and "single_module"
# appears in it, assume the flag caused a linker warning
if test -s conftest.err && $GREP single_module conftest.err; then
cat conftest.err >&5
# Otherwise, if the output was created with a 0 exit code from
# the compiler, it worked.
elif test -f libconftest.dylib && test $_lt_result -eq 0; then
lt_cv_apple_cc_single_mod=yes
else
cat conftest.err >&5
fi
rm -rf libconftest.dylib*
rm -f conftest.*
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
if ${lt_cv_ld_exported_symbols_list+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_ld_exported_symbols_list=no
save_LDFLAGS=$LDFLAGS
echo "_main" > conftest.sym
LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
lt_cv_ld_exported_symbols_list=yes
else
lt_cv_ld_exported_symbols_list=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LDFLAGS="$save_LDFLAGS"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
$as_echo_n "checking for -force_load linker flag... " >&6; }
if ${lt_cv_ld_force_load+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_ld_force_load=no
cat > conftest.c << _LT_EOF
int forced_loaded() { return 2;}
_LT_EOF
echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
$LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
echo "$AR cru libconftest.a conftest.o" >&5
$AR cru libconftest.a conftest.o 2>&5
echo "$RANLIB libconftest.a" >&5
$RANLIB libconftest.a 2>&5
cat > conftest.c << _LT_EOF
int main() { return 0;}
_LT_EOF
echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
_lt_result=$?
if test -s conftest.err && $GREP force_load conftest.err; then
cat conftest.err >&5
elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
lt_cv_ld_force_load=yes
else
cat conftest.err >&5
fi
rm -f conftest.err libconftest.a conftest conftest.c
rm -rf conftest.dSYM
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
$as_echo "$lt_cv_ld_force_load" >&6; }
case $host_os in
rhapsody* | darwin1.[012])
_lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
darwin1.*)
_lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
darwin*) # darwin 5.x on
# if running on 10.5 or later, the deployment target defaults
# to the OS version, if on x86, and 10.4, the deployment
# target defaults to 10.4. Don't you love it?
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
10.0,*86*-darwin8*|10.0,*-darwin[91]*)
_lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
10.[012]*)
_lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
10.*)
_lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
esac
;;
esac
if test "$lt_cv_apple_cc_single_mod" = "yes"; then
_lt_dar_single_mod='$single_module'
fi
if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
_lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
else
_lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
fi
if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
fi
;;
esac
for ac_header in dlfcn.h
do :
ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
"
if test "x$ac_cv_header_dlfcn_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_DLFCN_H 1
_ACEOF
fi
done
# Set options
enable_dlopen=no
enable_win32_dll=no
# Check whether --enable-shared was given.
if test "${enable_shared+set}" = set; then :
enableval=$enable_shared; p=${PACKAGE-default}
case $enableval in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
for pkg in $enableval; do
IFS="$lt_save_ifs"
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS="$lt_save_ifs"
;;
esac
else
enable_shared=yes
fi
# Check whether --with-pic was given.
if test "${with_pic+set}" = set; then :
withval=$with_pic; lt_p=${PACKAGE-default}
case $withval in
yes|no) pic_mode=$withval ;;
*)
pic_mode=default
# Look at the argument we got. We use all the common list separators.
lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
for lt_pkg in $withval; do
IFS="$lt_save_ifs"
if test "X$lt_pkg" = "X$lt_p"; then
pic_mode=yes
fi
done
IFS="$lt_save_ifs"
;;
esac
else
pic_mode=default
fi
test -z "$pic_mode" && pic_mode=default
# Check whether --enable-fast-install was given.
if test "${enable_fast_install+set}" = set; then :
enableval=$enable_fast_install; p=${PACKAGE-default}
case $enableval in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
for pkg in $enableval; do
IFS="$lt_save_ifs"
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
IFS="$lt_save_ifs"
;;
esac
else
enable_fast_install=yes
fi
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ltmain"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
test -z "$LN_S" && LN_S="ln -s"
if test -n "${ZSH_VERSION+set}" ; then
setopt NO_GLOB_SUBST
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
$as_echo_n "checking for objdir... " >&6; }
if ${lt_cv_objdir+:} false; then :
$as_echo_n "(cached) " >&6
else
rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
if test -d .libs; then
lt_cv_objdir=.libs
else
# MS-DOS does not allow filenames that begin with a dot.
lt_cv_objdir=_libs
fi
rmdir .libs 2>/dev/null
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
$as_echo "$lt_cv_objdir" >&6; }
objdir=$lt_cv_objdir
cat >>confdefs.h <<_ACEOF
#define LT_OBJDIR "$lt_cv_objdir/"
_ACEOF
case $host_os in
aix3*)
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test "X${COLLECT_NAMES+set}" != Xset; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
;;
esac
# Global variables:
ofile=libtool
can_build_shared=yes
# All known linkers require a `.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
with_gnu_ld="$lt_cv_prog_gnu_ld"
old_CC="$CC"
old_CFLAGS="$CFLAGS"
# Set sane defaults for various variables
test -z "$CC" && CC=cc
test -z "$LTCC" && LTCC=$CC
test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
test -z "$LD" && LD=ld
test -z "$ac_objext" && ac_objext=o
for cc_temp in $compiler""; do
case $cc_temp in
compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
\-*) ;;
*) break;;
esac
done
cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
# Only perform the check for file, if the check method requires it
test -z "$MAGIC_CMD" && MAGIC_CMD=file
case $deplibs_check_method in
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
if ${lt_cv_path_MAGIC_CMD+:} false; then :
$as_echo_n "(cached) " >&6
else
case $MAGIC_CMD in
[\\/*] | ?:[\\/]*)
lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
;;
*)
lt_save_MAGIC_CMD="$MAGIC_CMD"
lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
for ac_dir in $ac_dummy; do
IFS="$lt_save_ifs"
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/${ac_tool_prefix}file; then
lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
else
cat <<_LT_EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such. This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem. Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org
_LT_EOF
fi ;;
esac
fi
break
fi
done
IFS="$lt_save_ifs"
MAGIC_CMD="$lt_save_MAGIC_CMD"
;;
esac
fi
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
$as_echo "$MAGIC_CMD" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
$as_echo_n "checking for file... " >&6; }
if ${lt_cv_path_MAGIC_CMD+:} false; then :
$as_echo_n "(cached) " >&6
else
case $MAGIC_CMD in
[\\/*] | ?:[\\/]*)
lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
;;
*)
lt_save_MAGIC_CMD="$MAGIC_CMD"
lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
for ac_dir in $ac_dummy; do
IFS="$lt_save_ifs"
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/file; then
lt_cv_path_MAGIC_CMD="$ac_dir/file"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
else
cat <<_LT_EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such. This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem. Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org
_LT_EOF
fi ;;
esac
fi
break
fi
done
IFS="$lt_save_ifs"
MAGIC_CMD="$lt_save_MAGIC_CMD"
;;
esac
fi
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
$as_echo "$MAGIC_CMD" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
else
MAGIC_CMD=:
fi
fi
fi
;;
esac
# Use C for the default configuration in the libtool script
lt_save_CC="$CC"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
# Source file extension for C test sources.
ac_ext=c
# Object file extension for compiled C test sources.
objext=o
objext=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"
# Code to be used in simple link tests
lt_simple_link_test_code='int main(){return(0);}'
# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}
# If no C compiler flags were specified, use CFLAGS.
LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
# Allow CC to be a program name with arguments.
compiler=$CC
# Save the default compiler, since it gets overwritten when the other
# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
compiler_DEFAULT=$CC
# save warnings/boilerplate of simple test code
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" >conftest.$ac_ext
eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_compiler_boilerplate=`cat conftest.err`
$RM conftest*
ac_outfile=conftest.$ac_objext
echo "$lt_simple_link_test_code" >conftest.$ac_ext
eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
$RM -r conftest*
if test -n "$compiler"; then
lt_prog_compiler_no_builtin_flag=
if test "$GCC" = yes; then
case $cc_basename in
nvcc*)
lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
*)
lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_rtti_exceptions=no
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-fno-rtti -fno-exceptions"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
$ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler_rtti_exceptions=yes
fi
fi
$RM conftest*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
else
:
fi
fi
lt_prog_compiler_wl=
lt_prog_compiler_pic=
lt_prog_compiler_static=
if test "$GCC" = yes; then
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_static='-static'
case $host_os in
aix*)
# All AIX code is PIC.
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static='-Bstatic'
fi
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
lt_prog_compiler_pic='-fPIC'
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
# adding the `-m68020' flag to GCC prevents building anything better,
# like `-m68040'.
lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
;;
esac
;;
beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
# Although the cygwin gcc ignores -fPIC, still need this for old-style
# (--disable-auto-import) libraries
lt_prog_compiler_pic='-DDLL_EXPORT'
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
lt_prog_compiler_pic='-fno-common'
;;
haiku*)
# PIC is the default for Haiku.
# The "-static" flag exists, but is broken.
lt_prog_compiler_static=
;;
hpux*)
# PIC is the default for 64-bit PA HP-UX, but not for 32-bit
# PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
# sets the default TLS model and affects inlining.
case $host_cpu in
hppa*64*)
# +Z the default
;;
*)
lt_prog_compiler_pic='-fPIC'
;;
esac
;;
interix[3-9]*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
;;
msdosdjgpp*)
# Just because we use GCC doesn't mean we suddenly get shared libraries
# on systems that don't support them.
lt_prog_compiler_can_build_shared=no
enable_shared=no
;;
*nto* | *qnx*)
# QNX uses GNU C++, but need to define -shared option too, otherwise
# it will coredump.
lt_prog_compiler_pic='-fPIC -shared'
;;
sysv4*MP*)
if test -d /usr/nec; then
lt_prog_compiler_pic=-Kconform_pic
fi
;;
*)
lt_prog_compiler_pic='-fPIC'
;;
esac
case $cc_basename in
nvcc*) # Cuda Compiler Driver 2.2
lt_prog_compiler_wl='-Xlinker '
if test -n "$lt_prog_compiler_pic"; then
lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
fi
;;
esac
else
# PORTME Check for flag to pass linker flags through the system compiler.
case $host_os in
aix*)
lt_prog_compiler_wl='-Wl,'
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static='-Bstatic'
else
lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
fi
;;
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_prog_compiler_pic='-DDLL_EXPORT'
;;
hpux9* | hpux10* | hpux11*)
lt_prog_compiler_wl='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
*)
lt_prog_compiler_pic='+Z'
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
lt_prog_compiler_static='${wl}-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
lt_prog_compiler_wl='-Wl,'
# PIC (with -KPIC) is the default.
lt_prog_compiler_static='-non_shared'
;;
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
# old Intel for x86_64 which still supported -KPIC.
ecc*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-static'
;;
# icc used to be incompatible with GCC.
# ICC 10 doesn't accept -KPIC any more.
icc* | ifort*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-fPIC'
lt_prog_compiler_static='-static'
;;
# Lahey Fortran 8.1.
lf95*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='--shared'
lt_prog_compiler_static='--static'
;;
nagfor*)
# NAG Fortran compiler
lt_prog_compiler_wl='-Wl,-Wl,,'
lt_prog_compiler_pic='-PIC'
lt_prog_compiler_static='-Bstatic'
;;
pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-fpic'
lt_prog_compiler_static='-Bstatic'
;;
ccc*)
lt_prog_compiler_wl='-Wl,'
# All Alpha code is PIC.
lt_prog_compiler_static='-non_shared'
;;
xl* | bgxl* | bgf* | mpixl*)
# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-qpic'
lt_prog_compiler_static='-qstaticlink'
;;
*)
case `$CC -V 2>&1 | sed 5q` in
*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
# Sun Fortran 8.3 passes all unrecognized flags to the linker
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
lt_prog_compiler_wl=''
;;
*Sun\ F* | *Sun*Fortran*)
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
lt_prog_compiler_wl='-Qoption ld '
;;
*Sun\ C*)
# Sun C 5.9
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
lt_prog_compiler_wl='-Wl,'
;;
*Intel*\ [CF]*Compiler*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-fPIC'
lt_prog_compiler_static='-static'
;;
*Portland\ Group*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-fpic'
lt_prog_compiler_static='-Bstatic'
;;
esac
;;
esac
;;
newsos6)
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
;;
*nto* | *qnx*)
# QNX uses GNU C++, but need to define -shared option too, otherwise
# it will coredump.
lt_prog_compiler_pic='-fPIC -shared'
;;
osf3* | osf4* | osf5*)
lt_prog_compiler_wl='-Wl,'
# All OSF/1 code is PIC.
lt_prog_compiler_static='-non_shared'
;;
rdos*)
lt_prog_compiler_static='-non_shared'
;;
solaris*)
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
case $cc_basename in
f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
lt_prog_compiler_wl='-Qoption ld ';;
*)
lt_prog_compiler_wl='-Wl,';;
esac
;;
sunos4*)
lt_prog_compiler_wl='-Qoption ld '
lt_prog_compiler_pic='-PIC'
lt_prog_compiler_static='-Bstatic'
;;
sysv4 | sysv4.2uw2* | sysv4.3*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
;;
sysv4*MP*)
if test -d /usr/nec ;then
lt_prog_compiler_pic='-Kconform_pic'
lt_prog_compiler_static='-Bstatic'
fi
;;
sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
;;
unicos*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_can_build_shared=no
;;
uts4*)
lt_prog_compiler_pic='-pic'
lt_prog_compiler_static='-Bstatic'
;;
*)
lt_prog_compiler_can_build_shared=no
;;
esac
fi
case $host_os in
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic=
;;
*)
lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
if ${lt_cv_prog_compiler_pic+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
$as_echo "$lt_cv_prog_compiler_pic" >&6; }
lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
#
# Check to make sure the PIC flag actually works.
#
if test -n "$lt_prog_compiler_pic"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
if ${lt_cv_prog_compiler_pic_works+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_pic_works=no
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
$ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler_pic_works=yes
fi
fi
$RM conftest*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
case $lt_prog_compiler_pic in
"" | " "*) ;;
*) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
esac
else
lt_prog_compiler_pic=
lt_prog_compiler_can_build_shared=no
fi
fi
#
# Check to make sure the static flag actually works.
#
wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
if ${lt_cv_prog_compiler_static_works+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_static_works=no
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&5
$ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler_static_works=yes
fi
else
lt_cv_prog_compiler_static_works=yes
fi
fi
$RM -r conftest*
LDFLAGS="$save_LDFLAGS"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
if test x"$lt_cv_prog_compiler_static_works" = xyes; then
:
else
lt_prog_compiler_static=
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
if ${lt_cv_prog_compiler_c_o+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_c_o=no
$RM -r conftest 2>/dev/null
mkdir conftest
cd conftest
mkdir out
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
$ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
lt_cv_prog_compiler_c_o=yes
fi
fi
chmod u+w . 2>&5
$RM conftest*
# SGI C++ compiler will create directory out/ii_files/ for
# template instantiation
test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
$RM out/* && rmdir out
cd ..
$RM -r conftest
$RM conftest*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
if ${lt_cv_prog_compiler_c_o+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_c_o=no
$RM -r conftest 2>/dev/null
mkdir conftest
cd conftest
mkdir out
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
$ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
lt_cv_prog_compiler_c_o=yes
fi
fi
chmod u+w . 2>&5
$RM conftest*
# SGI C++ compiler will create directory out/ii_files/ for
# template instantiation
test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
$RM out/* && rmdir out
cd ..
$RM -r conftest
$RM conftest*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
hard_links="nottested"
if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
# do not overwrite the value of need_locks provided by the user
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
$as_echo_n "checking if we can lock with hard links... " >&6; }
hard_links=yes
$RM conftest*
ln conftest.a conftest.b 2>/dev/null && hard_links=no
touch conftest.a
ln conftest.a conftest.b 2>&5 || hard_links=no
ln conftest.a conftest.b 2>/dev/null && hard_links=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
$as_echo "$hard_links" >&6; }
if test "$hard_links" = no; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
need_locks=warn
fi
else
need_locks=no
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
runpath_var=
allow_undefined_flag=
always_export_symbols=no
archive_cmds=
archive_expsym_cmds=
compiler_needs_object=no
enable_shared_with_static_runtimes=no
export_dynamic_flag_spec=
export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
hardcode_automatic=no
hardcode_direct=no
hardcode_direct_absolute=no
hardcode_libdir_flag_spec=
hardcode_libdir_separator=
hardcode_minus_L=no
hardcode_shlibpath_var=unsupported
inherit_rpath=no
link_all_deplibs=unknown
module_cmds=
module_expsym_cmds=
old_archive_from_new_cmds=
old_archive_from_expsyms_cmds=
thread_safe_flag_spec=
whole_archive_flag_spec=
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
include_expsyms=
# exclude_expsyms can be an extended regexp of symbols to exclude
# it will be wrapped by ` (' and `)$', so one must not match beginning or
# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
# as well as any symbol that contains `d'.
exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced. Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
# Exclude shared library initialization/finalization symbols.
extract_expsyms_cmds=
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
if test "$GCC" != yes; then
with_gnu_ld=no
fi
;;
interix*)
# we just hope/assume this is gcc and not c89 (= MSVC++)
with_gnu_ld=yes
;;
openbsd*)
with_gnu_ld=no
;;
linux* | k*bsd*-gnu | gnu*)
link_all_deplibs=no
;;
esac
ld_shlibs=yes
# On some targets, GNU ld is compatible enough with the native linker
# that we're better off using the native interface for both.
lt_use_gnu_ld_interface=no
if test "$with_gnu_ld" = yes; then
case $host_os in
aix*)
# The AIX port of GNU ld has always aspired to compatibility
# with the native linker. However, as the warning in the GNU ld
# block says, versions before 2.19.5* couldn't really create working
# shared libraries, regardless of the interface used.
case `$LD -v 2>&1` in
*\ \(GNU\ Binutils\)\ 2.19.5*) ;;
*\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
*\ \(GNU\ Binutils\)\ [3-9]*) ;;
*)
lt_use_gnu_ld_interface=yes
;;
esac
;;
*)
lt_use_gnu_ld_interface=yes
;;
esac
fi
if test "$lt_use_gnu_ld_interface" = yes; then
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
runpath_var=LD_RUN_PATH
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
export_dynamic_flag_spec='${wl}--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
else
whole_archive_flag_spec=
fi
supports_anon_versioning=no
case `$LD -v 2>&1` in
*GNU\ gold*) supports_anon_versioning=yes ;;
*\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
# See if GNU ld supports shared libraries.
case $host_os in
aix[3-9]*)
# On AIX/PPC, the GNU linker is very broken
if test "$host_cpu" != ia64; then
ld_shlibs=no
cat <<_LT_EOF 1>&2
*** Warning: the GNU linker, at least up to release 2.19, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support. If you
*** really care for shared libraries, you may want to install binutils
*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
*** You will then need to restart the configuration process.
_LT_EOF
fi
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds=''
;;
m68k)
archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
;;
esac
;;
beos*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
allow_undefined_flag=unsupported
# Joseph Beckenbach says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
else
ld_shlibs=no
fi
;;
cygwin* | mingw* | pw32* | cegcc*)
# _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec='-L$libdir'
export_dynamic_flag_spec='${wl}--export-all-symbols'
allow_undefined_flag=unsupported
always_export_symbols=no
enable_shared_with_static_runtimes=yes
export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
cp $export_symbols $output_objdir/$soname.def;
else
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
ld_shlibs=no
fi
;;
haiku*)
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
link_all_deplibs=yes
;;
interix[3-9]*)
hardcode_direct=no
hardcode_shlibpath_var=no
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
export_dynamic_flag_spec='${wl}-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
tmp_diet=no
if test "$host_os" = linux-dietlibc; then
case $cc_basename in
diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
esac
fi
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
&& test "$tmp_diet" = no
then
tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group f77 and f90 compilers
whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
tmp_addflag=' -i_dynamic -nofor_main' ;;
ifc* | ifort*) # Intel Fortran compiler
tmp_addflag=' -nofor_main' ;;
lf95*) # Lahey Fortran 8.1
whole_archive_flag_spec=
tmp_sharedflag='--shared' ;;
xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
nvcc*) # Cuda Compiler Driver 2.2
whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
compiler_needs_object=yes
;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
compiler_needs_object=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
tmp_sharedflag='-G' ;;
esac
archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
if test "x$supports_anon_versioning" = xyes; then
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
echo "local: *; };" >> $output_objdir/$libname.ver~
$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
fi
case $cc_basename in
xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
if test "x$supports_anon_versioning" = xyes; then
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
echo "local: *; };" >> $output_objdir/$libname.ver~
$LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
else
ld_shlibs=no
fi
;;
netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
solaris*)
if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
ld_shlibs=no
cat <<_LT_EOF 1>&2
*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.9.1 or newer. Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
case `$LD -v 2>&1` in
*\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
ld_shlibs=no
cat <<_LT_EOF 1>&2
*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
*** reliably create shared libraries on SCO systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
_LT_EOF
;;
*)
# For security reasons, it is highly recommended that you always
# use absolute paths for naming shared libraries, and exclude the
# DT_RUNPATH tag from executables and libraries. But doing so
# requires that you compile everything twice, which is a pain.
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
;;
esac
;;
sunos4*)
archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
wlarc=
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
;;
esac
if test "$ld_shlibs" = no; then
runpath_var=
hardcode_libdir_flag_spec=
export_dynamic_flag_spec=
whole_archive_flag_spec=
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
case $host_os in
aix3*)
allow_undefined_flag=unsupported
always_export_symbols=yes
archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
hardcode_minus_L=yes
if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
hardcode_direct=unsupported
fi
;;
aix[4-9]*)
if test "$host_cpu" = ia64; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
no_entry_flag=""
else
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
# Also, AIX nm treats weak defined symbols like other global
# defined symbols, whereas GNU nm marks them as "W".
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
# need to do runtime linking.
case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
for ld_flag in $LDFLAGS; do
if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
aix_use_runtimelinking=yes
break
fi
done
;;
esac
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
# When large executables or shared objects are built, AIX ld can
# have problems creating the table of contents. If linking a library
# or program results in "error TOC overflow" add -mminimal-toc to
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
archive_cmds=''
hardcode_direct=yes
hardcode_direct_absolute=yes
hardcode_libdir_separator=':'
link_all_deplibs=yes
file_list_spec='${wl}-f,'
if test "$GCC" = yes; then
case $host_os in aix4.[012]|aix4.[012].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
# We have reworked collect2
:
else
# We have old collect2
hardcode_direct=unsupported
# It fails to find uninstalled libraries when the uninstalled
# path is not listed in the libpath. Setting hardcode_minus_L
# to unsupported forces relinking
hardcode_minus_L=yes
hardcode_libdir_flag_spec='-L$libdir'
hardcode_libdir_separator=
fi
;;
esac
shared_flag='-shared'
if test "$aix_use_runtimelinking" = yes; then
shared_flag="$shared_flag "'${wl}-G'
fi
link_all_deplibs=no
else
# not using gcc
if test "$host_cpu" = ia64; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
shared_flag='${wl}-G'
else
shared_flag='${wl}-bM:SRE'
fi
fi
fi
export_dynamic_flag_spec='${wl}-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to export.
always_export_symbols=yes
if test "$aix_use_runtimelinking" = yes; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
allow_undefined_flag='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
if test "${lt_cv_aix_libpath+set}" = set; then
aix_libpath=$lt_cv_aix_libpath
else
if ${lt_cv_aix_libpath_+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
lt_aix_libpath_sed='
/Import File Strings/,/^$/ {
/^0/ {
s/^0 *\([^ ]*\) *$/\1/
p
}
}'
lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
# Check for a 64-bit object if we didn't find anything.
if test -z "$lt_cv_aix_libpath_"; then
lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
fi
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
if test -z "$lt_cv_aix_libpath_"; then
lt_cv_aix_libpath_="/usr/lib:/lib"
fi
fi
aix_libpath=$lt_cv_aix_libpath_
fi
hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
else
if test "$host_cpu" = ia64; then
hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
allow_undefined_flag="-z nodefs"
archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
if test "${lt_cv_aix_libpath+set}" = set; then
aix_libpath=$lt_cv_aix_libpath
else
if ${lt_cv_aix_libpath_+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
lt_aix_libpath_sed='
/Import File Strings/,/^$/ {
/^0/ {
s/^0 *\([^ ]*\) *$/\1/
p
}
}'
lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
# Check for a 64-bit object if we didn't find anything.
if test -z "$lt_cv_aix_libpath_"; then
lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
fi
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
if test -z "$lt_cv_aix_libpath_"; then
lt_cv_aix_libpath_="/usr/lib:/lib"
fi
fi
aix_libpath=$lt_cv_aix_libpath_
fi
hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
no_undefined_flag=' ${wl}-bernotok'
allow_undefined_flag=' ${wl}-berok'
if test "$with_gnu_ld" = yes; then
# We only use this code for GNU lds that support --whole-archive.
whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec='$convenience'
fi
archive_cmds_need_lc=yes
# This is similar to how AIX traditionally builds its shared libraries.
archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds=''
;;
m68k)
archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
;;
esac
;;
bsdi[45]*)
export_dynamic_flag_spec=-rdynamic
;;
cygwin* | mingw* | pw32* | cegcc*)
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
case $cc_basename in
cl*)
# Native MSVC
hardcode_libdir_flag_spec=' '
allow_undefined_flag=unsupported
always_export_symbols=yes
file_list_spec='@'
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=".dll"
# FIXME: Setting linknames here is a bad hack.
archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
else
sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
fi~
$CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
enable_shared_with_static_runtimes=yes
exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
# Don't use ranlib
old_postinstall_cmds='chmod 644 $oldlib'
postlink_cmds='lt_outputfile="@OUTPUT@"~
lt_tool_outputfile="@TOOL_OUTPUT@"~
case $lt_outputfile in
*.exe|*.EXE) ;;
*)
lt_outputfile="$lt_outputfile.exe"
lt_tool_outputfile="$lt_tool_outputfile.exe"
;;
esac~
if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
$MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
$RM "$lt_outputfile.manifest";
fi'
;;
*)
# Assume MSVC wrapper
hardcode_libdir_flag_spec=' '
allow_undefined_flag=unsupported
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=".dll"
# FIXME: Setting linknames here is a bad hack.
archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
old_archive_from_new_cmds='true'
# FIXME: Should let the user specify the lib program.
old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
enable_shared_with_static_runtimes=yes
;;
esac
;;
darwin* | rhapsody*)
archive_cmds_need_lc=no
hardcode_direct=no
hardcode_automatic=yes
hardcode_shlibpath_var=unsupported
if test "$lt_cv_ld_force_load" = "yes"; then
whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
else
whole_archive_flag_spec=''
fi
link_all_deplibs=yes
allow_undefined_flag="$_lt_dar_allow_undefined"
case $cc_basename in
ifort*) _lt_dar_can_shared=yes ;;
*) _lt_dar_can_shared=$GCC ;;
esac
if test "$_lt_dar_can_shared" = "yes"; then
output_verbose_link_cmd=func_echo_all
archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
else
ld_shlibs=no
fi
;;
dgux*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_shlibpath_var=no
;;
# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
# support. Future versions do this automatically, but an explicit c++rt0.o
# does not break anything, and helps significantly (at the cost of a little
# extra space).
freebsd2.2*)
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
# Unfortunately, older versions of FreeBSD 2 do not have this feature.
freebsd2.*)
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes
hardcode_minus_L=yes
hardcode_shlibpath_var=no
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
freebsd* | dragonfly*)
archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
hpux9*)
if test "$GCC" = yes; then
archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
else
archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
export_dynamic_flag_spec='${wl}-E'
;;
hpux10*)
if test "$GCC" = yes && test "$with_gnu_ld" = no; then
archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
if test "$with_gnu_ld" = no; then
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
hardcode_direct_absolute=yes
export_dynamic_flag_spec='${wl}-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
fi
;;
hpux11*)
if test "$GCC" = yes && test "$with_gnu_ld" = no; then
case $host_cpu in
hppa*64*)
archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
case $host_cpu in
hppa*64*)
archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
# Older versions of the 11.00 compiler do not understand -b yet
# (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
$as_echo_n "checking if $CC understands -b... " >&6; }
if ${lt_cv_prog_compiler__b+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler__b=no
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS -b"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&5
$ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler__b=yes
fi
else
lt_cv_prog_compiler__b=yes
fi
fi
$RM -r conftest*
LDFLAGS="$save_LDFLAGS"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
$as_echo "$lt_cv_prog_compiler__b" >&6; }
if test x"$lt_cv_prog_compiler__b" = xyes; then
archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
;;
esac
fi
if test "$with_gnu_ld" = no; then
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_separator=:
case $host_cpu in
hppa*64*|ia64*)
hardcode_direct=no
hardcode_shlibpath_var=no
;;
*)
hardcode_direct=yes
hardcode_direct_absolute=yes
export_dynamic_flag_spec='${wl}-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
;;
esac
fi
;;
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
# This should be the same for all languages, so no per-tag cache variable.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
if ${lt_cv_irix_exported_symbol+:} false; then :
$as_echo_n "(cached) " >&6
else
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int foo (void) { return 0; }
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
lt_cv_irix_exported_symbol=yes
else
lt_cv_irix_exported_symbol=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LDFLAGS="$save_LDFLAGS"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
$as_echo "$lt_cv_irix_exported_symbol" >&6; }
if test "$lt_cv_irix_exported_symbol" = yes; then
archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
fi
else
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
fi
archive_cmds_need_lc='no'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
inherit_rpath=yes
link_all_deplibs=yes
;;
netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
fi
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
newsos6)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
hardcode_shlibpath_var=no
;;
*nto* | *qnx*)
;;
openbsd*)
if test -f /usr/libexec/ld.so; then
hardcode_direct=yes
hardcode_shlibpath_var=no
hardcode_direct_absolute=yes
if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
export_dynamic_flag_spec='${wl}-E'
else
case $host_os in
openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
hardcode_libdir_flag_spec='-R$libdir'
;;
*)
archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
;;
esac
fi
else
ld_shlibs=no
fi
;;
os2*)
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
allow_undefined_flag=unsupported
archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
;;
osf3*)
if test "$GCC" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
allow_undefined_flag=' -expect_unresolved \*'
archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
fi
archive_cmds_need_lc='no'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
else
allow_undefined_flag=' -expect_unresolved \*'
archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec='-rpath $libdir'
fi
archive_cmds_need_lc='no'
hardcode_libdir_separator=:
;;
solaris*)
no_undefined_flag=' -z defs'
if test "$GCC" = yes; then
wlarc='${wl}'
archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
wlarc=''
archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
;;
*)
wlarc='${wl}'
archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
;;
esac
fi
hardcode_libdir_flag_spec='-R$libdir'
hardcode_shlibpath_var=no
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
*)
# The compiler driver will combine and reorder linker options,
# but understands `-z linker_flag'. GCC discards it without `$wl',
# but is careful enough not to reorder.
# Supported since Solaris 2.6 (maybe 2.5.1?)
if test "$GCC" = yes; then
whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
else
whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
fi
;;
esac
link_all_deplibs=yes
;;
sunos4*)
if test "x$host_vendor" = xsequent; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
hardcode_libdir_flag_spec='-L$libdir'
hardcode_direct=yes
hardcode_minus_L=yes
hardcode_shlibpath_var=no
;;
sysv4)
case $host_vendor in
sni)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes # is this really true???
;;
siemens)
## LD is ld it makes a PLAMLIB
## CC just makes a GrossModule.
archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
reload_cmds='$CC -r -o $output$reload_objs'
hardcode_direct=no
;;
motorola)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=no #Motorola manual says yes, but my tests say they lie
;;
esac
runpath_var='LD_RUN_PATH'
hardcode_shlibpath_var=no
;;
sysv4.3*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_shlibpath_var=no
export_dynamic_flag_spec='-Bexport'
;;
sysv4*MP*)
if test -d /usr/nec; then
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_shlibpath_var=no
runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
ld_shlibs=yes
fi
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
no_undefined_flag='${wl}-z,text'
archive_cmds_need_lc=no
hardcode_shlibpath_var=no
runpath_var='LD_RUN_PATH'
if test "$GCC" = yes; then
archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
sysv5* | sco3.2v5* | sco5v6*)
# Note: We can NOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
no_undefined_flag='${wl}-z,text'
allow_undefined_flag='${wl}-z,nodefs'
archive_cmds_need_lc=no
hardcode_shlibpath_var=no
hardcode_libdir_flag_spec='${wl}-R,$libdir'
hardcode_libdir_separator=':'
link_all_deplibs=yes
export_dynamic_flag_spec='${wl}-Bexport'
runpath_var='LD_RUN_PATH'
if test "$GCC" = yes; then
archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
uts4*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_shlibpath_var=no
;;
*)
ld_shlibs=no
;;
esac
if test x$host_vendor = xsni; then
case $host in
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
export_dynamic_flag_spec='${wl}-Blargedynsym'
;;
esac
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
$as_echo "$ld_shlibs" >&6; }
test "$ld_shlibs" = no && can_build_shared=no
with_gnu_ld=$with_gnu_ld
#
# Do we need to explicitly link libc?
#
case "x$archive_cmds_need_lc" in
x|xyes)
# Assume -lc should be added
archive_cmds_need_lc=yes
if test "$enable_shared" = yes && test "$GCC" = yes; then
case $archive_cmds in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
;;
'$CC '*)
# Test whether the compiler implicitly links with -lc since on some
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
if ${lt_cv_archive_cmds_need_lc+:} false; then :
$as_echo_n "(cached) " >&6
else
$RM conftest*
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; } 2>conftest.err; then
soname=conftest
lib=conftest
libobjs=conftest.$ac_objext
deplibs=
wl=$lt_prog_compiler_wl
pic_flag=$lt_prog_compiler_pic
compiler_flags=-v
linker_flags=-v
verstring=
output_objdir=.
libname=conftest
lt_save_allow_undefined_flag=$allow_undefined_flag
allow_undefined_flag=
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
(eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
then
lt_cv_archive_cmds_need_lc=no
else
lt_cv_archive_cmds_need_lc=yes
fi
allow_undefined_flag=$lt_save_allow_undefined_flag
else
cat conftest.err 1>&5
fi
$RM conftest*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
;;
esac
fi
;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
$as_echo_n "checking dynamic linker characteristics... " >&6; }
if test "$GCC" = yes; then
case $host_os in
darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
*) lt_awk_arg="/^libraries:/" ;;
esac
case $host_os in
mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
*) lt_sed_strip_eq="s,=/,/,g" ;;
esac
lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
case $lt_search_path_spec in
*\;*)
# if the path contains ";" then we assume it to be the separator
# otherwise default to the standard path separator (i.e. ":") - it is
# assumed that no part of a normal pathname contains ";" but that should
# okay in the real world where ";" in dirpaths is itself problematic.
lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
;;
*)
lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
;;
esac
# Ok, now we have the path, separated by spaces, we can step through it
# and add multilib dir if necessary.
lt_tmp_lt_search_path_spec=
lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
for lt_sys_path in $lt_search_path_spec; do
if test -d "$lt_sys_path/$lt_multi_os_dir"; then
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
else
test -d "$lt_sys_path" && \
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
BEGIN {RS=" "; FS="/|\n";} {
lt_foo="";
lt_count=0;
for (lt_i = NF; lt_i > 0; lt_i--) {
if ($lt_i != "" && $lt_i != ".") {
if ($lt_i == "..") {
lt_count++;
} else {
if (lt_count == 0) {
lt_foo="/" $lt_i lt_foo;
} else {
lt_count--;
}
}
}
}
if (lt_foo != "") { lt_freq[lt_foo]++; }
if (lt_freq[lt_foo] == 1) { print lt_foo; }
}'`
# AWK program above erroneously prepends '/' to C:/dos/paths
# for these hosts.
case $host_os in
mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
$SED 's,/\([A-Za-z]:\),\1,g'` ;;
esac
sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
fi
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
need_lib_prefix=unknown
hardcode_into_libs=no
# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
need_version=unknown
case $host_os in
aix3*)
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
soname_spec='${libname}${release}${shared_ext}$major'
;;
aix[4-9]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
if test "$host_cpu" = ia64; then
# AIX 5 supports IA64
library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
# the line `#! .'. This would cause the generated library to
# depend on `.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[01] | aix4.[01].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
# AIX (on Power*) has no versioning support, so currently we can not hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
if test "$aix_use_runtimelinking" = yes; then
# If using run time linking (on AIX 4.2 or later) use lib.so
# instead of lib.a to let people know that these are not
# typical AIX shared libraries.
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
else
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
library_names_spec='${libname}${release}.a $libname.a'
soname_spec='${libname}${release}${shared_ext}$major'
fi
shlibpath_var=LIBPATH
fi
;;
amigaos*)
case $host_cpu in
powerpc)
# Since July 2007 AmigaOS4 officially supports .so libraries.
# When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
;;
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
beos*)
library_names_spec='${libname}${shared_ext}'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
bsdi[45]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
# the default ld.so.conf also contains /usr/contrib/lib and
# /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
# libtool to hard-code these into programs
;;
cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
shrext_cmds=".dll"
need_version=no
need_lib_prefix=no
case $GCC,$cc_basename in
yes,*)
# gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
chmod a+x \$dldir/$dlname~
if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
fi'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$RM \$dlpath'
shlibpath_overrides_runpath=yes
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
;;
esac
dynamic_linker='Win32 ld.exe'
;;
*,cl*)
# Native MSVC
libname_spec='$name'
soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
library_names_spec='${libname}.dll.lib'
case $build_os in
mingw*)
sys_lib_search_path_spec=
lt_save_ifs=$IFS
IFS=';'
for lt_path in $LIB
do
IFS=$lt_save_ifs
# Let DOS variable expansion print the short 8.3 style file name.
lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
done
IFS=$lt_save_ifs
# Convert to MSYS style.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
;;
cygwin*)
# Convert to unix form, then to dos form, then back to unix form
# but this time dos style (no spaces!) so that the unix form looks
# like /cygdrive/c/PROGRA~1:/cygdr...
sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
;;
*)
sys_lib_search_path_spec="$LIB"
if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
# It is most probably a Windows format PATH.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
else
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
fi
# FIXME: find the short name or the path components, as spaces are
# common. (e.g. "Program Files" -> "PROGRA~1")
;;
esac
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$RM \$dlpath'
shlibpath_overrides_runpath=yes
dynamic_linker='Win32 link.exe'
;;
*)
# Assume MSVC wrapper
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
dynamic_linker='Win32 ld.exe'
;;
esac
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
darwin* | rhapsody*)
dynamic_linker="$host_os dyld"
version_type=darwin
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
dgux*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
;;
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
if test -x /usr/bin/objformat; then
objformat=`/usr/bin/objformat`
else
case $host_os in
freebsd[23].*) objformat=aout ;;
*) objformat=elf ;;
esac
fi
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
need_version=yes
;;
esac
shlibpath_var=LD_LIBRARY_PATH
case $host_os in
freebsd2.*)
shlibpath_overrides_runpath=yes
;;
freebsd3.[01]* | freebsdelf3.[01]*)
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
*) # from 4.6 on, and DragonFly
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
esac
;;
haiku*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
dynamic_linker="$host_os runtime_loader"
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LIBRARY_PATH
shlibpath_overrides_runpath=yes
sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
hardcode_into_libs=yes
;;
hpux9* | hpux10* | hpux11*)
# Give a soname corresponding to the major version so that dld.sl refuses to
# link against other versions.
version_type=sunos
need_lib_prefix=no
need_version=no
case $host_cpu in
ia64*)
shrext_cmds='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
if test "X$HPUX_IA64_MODE" = X32; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
fi
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
;;
esac
# HP-UX runs *really* slowly unless shared libraries are mode 555, ...
postinstall_cmds='chmod 555 $lib'
# or fails outright, so override atomically:
install_override_mode=555
;;
interix[3-9]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
irix5* | irix6* | nonstopux*)
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
if test "$lt_cv_prog_gnu_ld" = yes; then
version_type=linux # correct to gnu/linux during the next big refactor
else
version_type=irix
fi ;;
esac
need_lib_prefix=no
need_version=no
soname_spec='${libname}${release}${shared_ext}$major'
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
;;
*)
case $LD in # libtool.m4 will add one of these switches to LD
*-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
libsuff= shlibsuff= libmagic=32-bit;;
*-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
libsuff=32 shlibsuff=N32 libmagic=N32;;
*-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
libsuff=64 shlibsuff=64 libmagic=64-bit;;
*) libsuff= shlibsuff= libmagic=never-match;;
esac
;;
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
hardcode_into_libs=yes
;;
# No shared lib support for Linux oldld, aout, or coff.
linux*oldld* | linux*aout* | linux*coff*)
dynamic_linker=no
;;
# This must be glibc/ELF.
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
# Some binutils ld are patched to set DT_RUNPATH
if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_shlibpath_overrides_runpath=no
save_LDFLAGS=$LDFLAGS
save_libdir=$libdir
eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
lt_cv_shlibpath_overrides_runpath=yes
fi
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LDFLAGS=$save_LDFLAGS
libdir=$save_libdir
fi
shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
hardcode_into_libs=yes
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
;;
netbsdelf*-gnu)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='NetBSD ld.elf_so'
;;
netbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
newsos6)
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
*nto* | *qnx*)
version_type=qnx
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='ldqnx.so'
;;
openbsd*)
version_type=sunos
sys_lib_dlsearch_path_spec="/usr/lib"
need_lib_prefix=no
# Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
case $host_os in
openbsd3.3 | openbsd3.3.*) need_version=yes ;;
*) need_version=no ;;
esac
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
case $host_os in
openbsd2.[89] | openbsd2.[89].*)
shlibpath_overrides_runpath=no
;;
*)
shlibpath_overrides_runpath=yes
;;
esac
else
shlibpath_overrides_runpath=yes
fi
;;
os2*)
libname_spec='$name'
shrext_cmds=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
shlibpath_var=LIBPATH
;;
osf3* | osf4* | osf5*)
version_type=osf
need_lib_prefix=no
need_version=no
soname_spec='${libname}${release}${shared_ext}$major'
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
;;
rdos*)
dynamic_linker=no
;;
solaris*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
# ldd complains unless libraries are executable
postinstall_cmds='chmod +x $lib'
;;
sunos4*)
version_type=sunos
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
if test "$with_gnu_ld" = yes; then
need_lib_prefix=no
fi
need_version=yes
;;
sysv4 | sysv4.3*)
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
shlibpath_overrides_runpath=no
need_lib_prefix=no
runpath_var=LD_RUN_PATH
;;
siemens)
need_lib_prefix=no
;;
motorola)
need_lib_prefix=no
need_version=no
shlibpath_overrides_runpath=no
sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
;;
esac
;;
sysv4*MP*)
if test -d /usr/nec ;then
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
soname_spec='$libname${shared_ext}.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
version_type=freebsd-elf
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
if test "$with_gnu_ld" = yes; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
case $host_os in
sco3.2v5*)
sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
;;
esac
fi
sys_lib_dlsearch_path_spec='/usr/lib'
;;
tpf*)
# TPF is a cross-target only. Preferred cross-host = GNU/Linux.
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
uts4*)
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
;;
*)
dynamic_linker=no
;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
$as_echo "$dynamic_linker" >&6; }
test "$dynamic_linker" = no && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test "$GCC" = yes; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
fi
if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" ||
test -n "$runpath_var" ||
test "X$hardcode_automatic" = "Xyes" ; then
# We can hardcode non-existent directories.
if test "$hardcode_direct" != no &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
test "$hardcode_minus_L" != no; then
# Linking always hardcodes the temporary library directory.
hardcode_action=relink
else
# We can link without hardcoding, and we can hardcode nonexisting dirs.
hardcode_action=immediate
fi
else
# We cannot hardcode anything, or else we can only hardcode existing
# directories.
hardcode_action=unsupported
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
$as_echo "$hardcode_action" >&6; }
if test "$hardcode_action" = relink ||
test "$inherit_rpath" = yes; then
# Fast installation is not supported
enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
test "$enable_shared" = no; then
# Fast installation is not necessary
enable_fast_install=needless
fi
if test "x$enable_dlopen" != xyes; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
else
lt_cv_dlopen=no
lt_cv_dlopen_libs=
case $host_os in
beos*)
lt_cv_dlopen="load_add_on"
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
mingw* | pw32* | cegcc*)
lt_cv_dlopen="LoadLibrary"
lt_cv_dlopen_libs=
;;
cygwin*)
lt_cv_dlopen="dlopen"
lt_cv_dlopen_libs=
;;
darwin*)
# if libdl is installed we need to link against it
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
if ${ac_cv_lib_dl_dlopen+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldl $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dlopen ();
int
main ()
{
return dlopen ();
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
ac_cv_lib_dl_dlopen=yes
else
ac_cv_lib_dl_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
lt_cv_dlopen="dyld"
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
fi
;;
*)
ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
if test "x$ac_cv_func_shl_load" = xyes; then :
lt_cv_dlopen="shl_load"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
$as_echo_n "checking for shl_load in -ldld... " >&6; }
if ${ac_cv_lib_dld_shl_load+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldld $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char shl_load ();
int
main ()
{
return shl_load ();
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
ac_cv_lib_dld_shl_load=yes
else
ac_cv_lib_dld_shl_load=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
else
ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
if test "x$ac_cv_func_dlopen" = xyes; then :
lt_cv_dlopen="dlopen"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
if ${ac_cv_lib_dl_dlopen+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldl $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dlopen ();
int
main ()
{
return dlopen ();
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
ac_cv_lib_dl_dlopen=yes
else
ac_cv_lib_dl_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
$as_echo_n "checking for dlopen in -lsvld... " >&6; }
if ${ac_cv_lib_svld_dlopen+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lsvld $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dlopen ();
int
main ()
{
return dlopen ();
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
ac_cv_lib_svld_dlopen=yes
else
ac_cv_lib_svld_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
$as_echo_n "checking for dld_link in -ldld... " >&6; }
if ${ac_cv_lib_dld_dld_link+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldld $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dld_link ();
int
main ()
{
return dld_link ();
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
ac_cv_lib_dld_dld_link=yes
else
ac_cv_lib_dld_dld_link=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
fi
fi
fi
fi
fi
fi
;;
esac
if test "x$lt_cv_dlopen" != xno; then
enable_dlopen=yes
else
enable_dlopen=no
fi
case $lt_cv_dlopen in
dlopen)
save_CPPFLAGS="$CPPFLAGS"
test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
save_LDFLAGS="$LDFLAGS"
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
save_LIBS="$LIBS"
LIBS="$lt_cv_dlopen_libs $LIBS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
$as_echo_n "checking whether a program can dlopen itself... " >&6; }
if ${lt_cv_dlopen_self+:} false; then :
$as_echo_n "(cached) " >&6
else
if test "$cross_compiling" = yes; then :
lt_cv_dlopen_self=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
#line $LINENO "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
#include
#endif
#include
#ifdef RTLD_GLOBAL
# define LT_DLGLOBAL RTLD_GLOBAL
#else
# ifdef DL_GLOBAL
# define LT_DLGLOBAL DL_GLOBAL
# else
# define LT_DLGLOBAL 0
# endif
#endif
/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
# ifdef RTLD_LAZY
# define LT_DLLAZY_OR_NOW RTLD_LAZY
# else
# ifdef DL_LAZY
# define LT_DLLAZY_OR_NOW DL_LAZY
# else
# ifdef RTLD_NOW
# define LT_DLLAZY_OR_NOW RTLD_NOW
# else
# ifdef DL_NOW
# define LT_DLLAZY_OR_NOW DL_NOW
# else
# define LT_DLLAZY_OR_NOW 0
# endif
# endif
# endif
# endif
#endif
/* When -fvisbility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
int fnord () { return 42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
int status = $lt_dlunknown;
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
else
{
if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
else puts (dlerror ());
}
/* dlclose (self); */
}
else
puts (dlerror ());
return status;
}
_LT_EOF
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
(./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
esac
else :
# compilation failed
lt_cv_dlopen_self=no
fi
fi
rm -fr conftest*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
$as_echo "$lt_cv_dlopen_self" >&6; }
if test "x$lt_cv_dlopen_self" = xyes; then
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
if ${lt_cv_dlopen_self_static+:} false; then :
$as_echo_n "(cached) " >&6
else
if test "$cross_compiling" = yes; then :
lt_cv_dlopen_self_static=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
#line $LINENO "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
#include
#endif
#include
#ifdef RTLD_GLOBAL
# define LT_DLGLOBAL RTLD_GLOBAL
#else
# ifdef DL_GLOBAL
# define LT_DLGLOBAL DL_GLOBAL
# else
# define LT_DLGLOBAL 0
# endif
#endif
/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
# ifdef RTLD_LAZY
# define LT_DLLAZY_OR_NOW RTLD_LAZY
# else
# ifdef DL_LAZY
# define LT_DLLAZY_OR_NOW DL_LAZY
# else
# ifdef RTLD_NOW
# define LT_DLLAZY_OR_NOW RTLD_NOW
# else
# ifdef DL_NOW
# define LT_DLLAZY_OR_NOW DL_NOW
# else
# define LT_DLLAZY_OR_NOW 0
# endif
# endif
# endif
# endif
#endif
/* When -fvisbility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
int fnord () { return 42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
int status = $lt_dlunknown;
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
else
{
if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
else puts (dlerror ());
}
/* dlclose (self); */
}
else
puts (dlerror ());
return status;
}
_LT_EOF
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
(./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
esac
else :
# compilation failed
lt_cv_dlopen_self_static=no
fi
fi
rm -fr conftest*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
$as_echo "$lt_cv_dlopen_self_static" >&6; }
fi
CPPFLAGS="$save_CPPFLAGS"
LDFLAGS="$save_LDFLAGS"
LIBS="$save_LIBS"
;;
esac
case $lt_cv_dlopen_self in
yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
*) enable_dlopen_self=unknown ;;
esac
case $lt_cv_dlopen_self_static in
yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
*) enable_dlopen_self_static=unknown ;;
esac
fi
striplib=
old_striplib=
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
$as_echo_n "checking whether stripping libraries is possible... " >&6; }
if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
test -z "$striplib" && striplib="$STRIP --strip-unneeded"
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
else
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
darwin*)
if test -n "$STRIP" ; then
striplib="$STRIP -x"
old_striplib="$STRIP -S"
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
;;
*)
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
;;
esac
fi
# Report which library types will actually be built
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
$as_echo_n "checking if libtool supports shared libraries... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
$as_echo "$can_build_shared" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
$as_echo_n "checking whether to build shared libraries... " >&6; }
test "$can_build_shared" = "no" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[4-9]*)
if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
test "$enable_shared" = yes && enable_static=no
fi
;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
$as_echo "$enable_shared" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
$as_echo_n "checking whether to build static libraries... " >&6; }
# Make sure either enable_shared or enable_static is yes.
test "$enable_shared" = yes || enable_static=yes
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
$as_echo "$enable_static" >&6; }
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
CC="$lt_save_CC"
ac_config_commands="$ac_config_commands libtool"
# Only expand once:
# Define a configure option for an alternate module directory
# Check whether --with-xorg-module-dir was given.
if test "${with_xorg_module_dir+set}" = set; then :
withval=$with_xorg_module_dir; moduledir="$withval"
else
moduledir="$libdir/xorg/modules"
fi
# Obtain compiler/linker options for the driver dependencies
pkg_failed=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XORG" >&5
$as_echo_n "checking for XORG... " >&6; }
if test -n "$XORG_CFLAGS"; then
pkg_cv_XORG_CFLAGS="$XORG_CFLAGS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
{ { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xorg-server >= 1.0.99.901 xproto fontsproto \$REQUIRED_MODULES\""; } >&5
($PKG_CONFIG --exists --print-errors "xorg-server >= 1.0.99.901 xproto fontsproto $REQUIRED_MODULES") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_XORG_CFLAGS=`$PKG_CONFIG --cflags "xorg-server >= 1.0.99.901 xproto fontsproto $REQUIRED_MODULES" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
else
pkg_failed=untried
fi
if test -n "$XORG_LIBS"; then
pkg_cv_XORG_LIBS="$XORG_LIBS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
{ { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xorg-server >= 1.0.99.901 xproto fontsproto \$REQUIRED_MODULES\""; } >&5
($PKG_CONFIG --exists --print-errors "xorg-server >= 1.0.99.901 xproto fontsproto $REQUIRED_MODULES") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_XORG_LIBS=`$PKG_CONFIG --libs "xorg-server >= 1.0.99.901 xproto fontsproto $REQUIRED_MODULES" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
else
pkg_failed=untried
fi
if test $pkg_failed = yes; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
_pkg_short_errors_supported=yes
else
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
XORG_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "xorg-server >= 1.0.99.901 xproto fontsproto $REQUIRED_MODULES" 2>&1`
else
XORG_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "xorg-server >= 1.0.99.901 xproto fontsproto $REQUIRED_MODULES" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$XORG_PKG_ERRORS" >&5
as_fn_error $? "Package requirements (xorg-server >= 1.0.99.901 xproto fontsproto $REQUIRED_MODULES) were not met:
$XORG_PKG_ERRORS
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables XORG_CFLAGS
and XORG_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Alternatively, you may set the environment variables XORG_CFLAGS
and XORG_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
To get pkg-config, see .
See \`config.log' for more details" "$LINENO" 5; }
else
XORG_CFLAGS=$pkg_cv_XORG_CFLAGS
XORG_LIBS=$pkg_cv_XORG_LIBS
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
fi
save_CFLAGS="$CFLAGS"
CFLAGS="$XORG_CFLAGS"
ac_fn_c_check_decl "$LINENO" "xf86ConfigIsaEntity" "ac_cv_have_decl_xf86ConfigIsaEntity" "#include \"xf86.h\"
"
if test "x$ac_cv_have_decl_xf86ConfigIsaEntity" = xyes; then :
$as_echo "#define HAVE_ISA 1" >>confdefs.h
fi
CFLAGS="$save_CFLAGS"
# Checks for libraries.
SAVE_CPPFLAGS="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS $XORG_CFLAGS"
ac_fn_c_check_decl "$LINENO" "XSERVER_LIBPCIACCESS" "ac_cv_have_decl_XSERVER_LIBPCIACCESS" "#include \"xorg-server.h\"
"
if test "x$ac_cv_have_decl_XSERVER_LIBPCIACCESS" = xyes; then :
XSERVER_LIBPCIACCESS=yes
else
XSERVER_LIBPCIACCESS=no
fi
CPPFLAGS="$SAVE_CPPFLAGS"
# Check whether --enable-xaa was given.
if test "${enable_xaa+set}" = set; then :
enableval=$enable_xaa; XAA="$enableval"
else
XAA=auto
fi
if test "x$XAA" != xno; then
save_CFLAGS=$CFLAGS
save_CPPFLAGS=$CPPFLAGS
CFLAGS=$XORG_CFLAGS
CPPFLAGS="$XORG_CFLAGS"
for ac_header in xaa.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "xaa.h" "ac_cv_header_xaa_h" "$ac_includes_default"
if test "x$ac_cv_header_xaa_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_XAA_H 1
_ACEOF
XAA=yes
else
XAA=no
fi
done
CFLAGS=$save_CFLAGS
CPPFLAGS=$save_CPPFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to include XAA support" >&5
$as_echo_n "checking whether to include XAA support... " >&6; }
if test "x$XAA" = xyes; then
XAA_TRUE=
XAA_FALSE='#'
else
XAA_TRUE='#'
XAA_FALSE=
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $XAA" >&5
$as_echo "$XAA" >&6; }
if test "x$XSERVER_LIBPCIACCESS" = xyes; then
pkg_failed=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for PCIACCESS" >&5
$as_echo_n "checking for PCIACCESS... " >&6; }
if test -n "$PCIACCESS_CFLAGS"; then
pkg_cv_PCIACCESS_CFLAGS="$PCIACCESS_CFLAGS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
{ { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"pciaccess >= 0.8.0\""; } >&5
($PKG_CONFIG --exists --print-errors "pciaccess >= 0.8.0") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_PCIACCESS_CFLAGS=`$PKG_CONFIG --cflags "pciaccess >= 0.8.0" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
else
pkg_failed=untried
fi
if test -n "$PCIACCESS_LIBS"; then
pkg_cv_PCIACCESS_LIBS="$PCIACCESS_LIBS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
{ { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"pciaccess >= 0.8.0\""; } >&5
($PKG_CONFIG --exists --print-errors "pciaccess >= 0.8.0") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_PCIACCESS_LIBS=`$PKG_CONFIG --libs "pciaccess >= 0.8.0" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
else
pkg_failed=untried
fi
if test $pkg_failed = yes; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
_pkg_short_errors_supported=yes
else
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
PCIACCESS_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "pciaccess >= 0.8.0" 2>&1`
else
PCIACCESS_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "pciaccess >= 0.8.0" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$PCIACCESS_PKG_ERRORS" >&5
as_fn_error $? "Package requirements (pciaccess >= 0.8.0) were not met:
$PCIACCESS_PKG_ERRORS
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables PCIACCESS_CFLAGS
and PCIACCESS_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Alternatively, you may set the environment variables PCIACCESS_CFLAGS
and PCIACCESS_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
To get pkg-config, see .
See \`config.log' for more details" "$LINENO" 5; }
else
PCIACCESS_CFLAGS=$pkg_cv_PCIACCESS_CFLAGS
PCIACCESS_LIBS=$pkg_cv_PCIACCESS_LIBS
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
fi
XORG_CFLAGS="$XORG_CFLAGS $PCIACCESS_CFLAGS"
fi
if test "x$XSERVER_LIBPCIACCESS" = xyes; then
XSERVER_LIBPCIACCESS_TRUE=
XSERVER_LIBPCIACCESS_FALSE='#'
else
XSERVER_LIBPCIACCESS_TRUE='#'
XSERVER_LIBPCIACCESS_FALSE=
fi
DRIVER_NAME=neomagic
ac_config_files="$ac_config_files Makefile src/Makefile man/Makefile"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs, see configure's option --config-cache.
# It is not useful on other systems. If it contains results you don't
# want to keep, you may remove or edit it.
#
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
# `ac_cv_env_foo' variables (set or unset) will be overridden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.
_ACEOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, we kill variables containing newlines.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(
for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
eval ac_val=\$$ac_var
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
*_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
*) { eval $ac_var=; unset $ac_var;} ;;
esac ;;
esac
done
(set) 2>&1 |
case $as_nl`(ac_space=' '; set) 2>&1` in #(
*${as_nl}ac_space=\ *)
# `set' does not quote correctly, so add quotes: double-quote
# substitution turns \\\\ into \\, and sed turns \\ into \.
sed -n \
"s/'/'\\\\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
;; #(
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
;;
esac |
sort
) |
sed '
/^ac_cv_env_/b end
t clear
:clear
s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
t end
s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
:end' >>confcache
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
if test -w "$cache_file"; then
if test "x$cache_file" != "x/dev/null"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
$as_echo "$as_me: updating cache $cache_file" >&6;}
if test ! -f "$cache_file" || test -h "$cache_file"; then
cat confcache >"$cache_file"
else
case $cache_file in #(
*/* | ?:*)
mv -f confcache "$cache_file"$$ &&
mv -f "$cache_file"$$ "$cache_file" ;; #(
*)
mv -f confcache "$cache_file" ;;
esac
fi
fi
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
fi
fi
rm -f confcache
test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
DEFS=-DHAVE_CONFIG_H
ac_libobjs=
ac_ltlibobjs=
U=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
# 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
# will be set to the directory where LIBOBJS objects are built.
as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs
LTLIBOBJS=$ac_ltlibobjs
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
$as_echo_n "checking that generated files are newer than configure... " >&6; }
if test -n "$am_sleep_pid"; then
# Hide warnings about reused PIDs.
wait $am_sleep_pid 2>/dev/null
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
$as_echo "done" >&6; }
if test -n "$EXEEXT"; then
am__EXEEXT_TRUE=
am__EXEEXT_FALSE='#'
else
am__EXEEXT_TRUE='#'
am__EXEEXT_FALSE=
fi
if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
as_fn_error $? "conditional \"AMDEP\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${XAA_TRUE}" && test -z "${XAA_FALSE}"; then
as_fn_error $? "conditional \"XAA\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${XSERVER_LIBPCIACCESS_TRUE}" && test -z "${XSERVER_LIBPCIACCESS_FALSE}"; then
as_fn_error $? "conditional \"XSERVER_LIBPCIACCESS\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
: "${CONFIG_STATUS=./config.status}"
ac_write_fail=0
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
as_write_fail=0
cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.
debug=false
ac_cs_recheck=false
ac_cs_silent=false
SHELL=\${CONFIG_SHELL-$SHELL}
export SHELL
_ASEOF
cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
## -------------------- ##
## M4sh Initialization. ##
## -------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
case `(set -o) 2>/dev/null` in #(
*posix*) :
set -o posix ;; #(
*) :
;;
esac
fi
as_nl='
'
export as_nl
# Printing a long string crashes Solaris 7 /usr/bin/printf.
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
# Prefer a ksh shell builtin over an external printf program on Solaris,
# but without wasting forks for bash or zsh.
if test -z "$BASH_VERSION$ZSH_VERSION" \
&& (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='print -r --'
as_echo_n='print -rn --'
elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='printf %s\n'
as_echo_n='printf %s'
else
if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
as_echo_n='/usr/ucb/echo -n'
else
as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
as_echo_n_body='eval
arg=$1;
case $arg in #(
*"$as_nl"*)
expr "X$arg" : "X\\(.*\\)$as_nl";
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
esac;
expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
'
export as_echo_n_body
as_echo_n='sh -c $as_echo_n_body as_echo'
fi
export as_echo_body
as_echo='sh -c $as_echo_body as_echo'
fi
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
PATH_SEPARATOR=:
(PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
(PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
PATH_SEPARATOR=';'
}
fi
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
as_myself=
case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done
IFS=$as_save_IFS
;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
as_myself=$0
fi
if test ! -f "$as_myself"; then
$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
exit 1
fi
# Unset variables that we do not need and which cause bugs (e.g. in
# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
# suppresses any "Segmentation fault" message there. '((' could
# trigger a bug in pdksh 5.2.14.
for as_var in BASH_ENV ENV MAIL MAILPATH
do eval test x\${$as_var+set} = xset \
&& ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
PS4='+ '
# NLS nuisances.
LC_ALL=C
export LC_ALL
LANGUAGE=C
export LANGUAGE
# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
# as_fn_error STATUS ERROR [LINENO LOG_FD]
# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
as_status=$1; test $as_status -eq 0 && as_status=1
if test "$4"; then
as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
$as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
fi
$as_echo "$as_me: error: $2" >&2
as_fn_exit $as_status
} # as_fn_error
# as_fn_set_status STATUS
# -----------------------
# Set $? to STATUS, without forking.
as_fn_set_status ()
{
return $1
} # as_fn_set_status
# as_fn_exit STATUS
# -----------------
# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
as_fn_exit ()
{
set +e
as_fn_set_status $1
exit $1
} # as_fn_exit
# as_fn_unset VAR
# ---------------
# Portably unset VAR.
as_fn_unset ()
{
{ eval $1=; unset $1;}
}
as_unset=as_fn_unset
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
# advantage of any shell optimizations that allow amortized linear growth over
# repeated appends, instead of the typical quadratic growth present in naive
# implementations.
if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
eval 'as_fn_append ()
{
eval $1+=\$2
}'
else
as_fn_append ()
{
eval $1=\$$1\$2
}
fi # as_fn_append
# as_fn_arith ARG...
# ------------------
# Perform arithmetic evaluation on the ARGs, and store the result in the
# global $as_val. Take advantage of shells that can avoid forks. The arguments
# must be portable across $(()) and expr.
if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
eval 'as_fn_arith ()
{
as_val=$(( $* ))
}'
else
as_fn_arith ()
{
as_val=`expr "$@" || test $? -eq 1`
}
fi # as_fn_arith
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
fi
if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
as_dirname=dirname
else
as_dirname=false
fi
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
}
/^X\/\(\/\/\)$/{
s//\1/
q
}
/^X\/\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in #(((((
-n*)
case `echo 'xy\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
xy) ECHO_C='\c';;
*) echo `echo ksh88 bug on AIX 6.1` > /dev/null
ECHO_T=' ';;
esac;;
*)
ECHO_N='-n';;
esac
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
mkdir conf$$.dir 2>/dev/null
fi
if (echo >conf$$.file) 2>/dev/null; then
if ln -s conf$$.file conf$$ 2>/dev/null; then
as_ln_s='ln -s'
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
# In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -pR'
fi
else
as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
# as_fn_mkdir_p
# -------------
# Create "$as_dir" as a directory, including parents if necessary.
as_fn_mkdir_p ()
{
case $as_dir in #(
-*) as_dir=./$as_dir;;
esac
test -d "$as_dir" || eval $as_mkdir_p || {
as_dirs=
while :; do
case $as_dir in #(
*\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
*) as_qdir=$as_dir;;
esac
as_dirs="'$as_qdir' $as_dirs"
as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
} || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
} # as_fn_mkdir_p
if mkdir -p . 2>/dev/null; then
as_mkdir_p='mkdir -p "$as_dir"'
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
# as_fn_executable_p FILE
# -----------------------
# Test if FILE is an executable regular file.
as_fn_executable_p ()
{
test -f "$1" && test -x "$1"
} # as_fn_executable_p
as_test_x='test -x'
as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
exec 6>&1
## ----------------------------------- ##
## Main body of $CONFIG_STATUS script. ##
## ----------------------------------- ##
_ASEOF
test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# Save the log message, to keep $0 and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by xf86-video-neomagic $as_me 1.2.9, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
CONFIG_LINKS = $CONFIG_LINKS
CONFIG_COMMANDS = $CONFIG_COMMANDS
$ $0 $@
on `(hostname || uname -n) 2>/dev/null | sed 1q`
"
_ACEOF
case $ac_config_files in *"
"*) set x $ac_config_files; shift; ac_config_files=$*;;
esac
case $ac_config_headers in *"
"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
esac
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
# Files that config.status was made for.
config_files="$ac_config_files"
config_headers="$ac_config_headers"
config_commands="$ac_config_commands"
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
ac_cs_usage="\
\`$as_me' instantiates files and other configuration actions
from templates according to the current configuration. Unless the files
and actions are specified as TAGs, all are instantiated by default.
Usage: $0 [OPTION]... [TAG]...
-h, --help print this help, then exit
-V, --version print version number and configuration settings, then exit
--config print configuration, then exit
-q, --quiet, --silent
do not print progress messages
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
--file=FILE[:TEMPLATE]
instantiate the configuration file FILE
--header=FILE[:TEMPLATE]
instantiate the configuration header FILE
Configuration files:
$config_files
Configuration headers:
$config_headers
Configuration commands:
$config_commands
Report bugs to ."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
xf86-video-neomagic config.status 1.2.9
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
Copyright (C) 2012 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
ac_pwd='$ac_pwd'
srcdir='$srcdir'
INSTALL='$INSTALL'
MKDIR_P='$MKDIR_P'
AWK='$AWK'
test -n "\$AWK" || AWK=awk
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# The default lists apply if the user does not specify any file.
ac_need_defaults=:
while test $# != 0
do
case $1 in
--*=?*)
ac_option=`expr "X$1" : 'X\([^=]*\)='`
ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
ac_shift=:
;;
--*=)
ac_option=`expr "X$1" : 'X\([^=]*\)='`
ac_optarg=
ac_shift=:
;;
*)
ac_option=$1
ac_optarg=$2
ac_shift=shift
;;
esac
case $ac_option in
# Handling of the options.
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
ac_cs_recheck=: ;;
--version | --versio | --versi | --vers | --ver | --ve | --v | -V )
$as_echo "$ac_cs_version"; exit ;;
--config | --confi | --conf | --con | --co | --c )
$as_echo "$ac_cs_config"; exit ;;
--debug | --debu | --deb | --de | --d | -d )
debug=: ;;
--file | --fil | --fi | --f )
$ac_shift
case $ac_optarg in
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
'') as_fn_error $? "missing file argument" ;;
esac
as_fn_append CONFIG_FILES " '$ac_optarg'"
ac_need_defaults=false;;
--header | --heade | --head | --hea )
$ac_shift
case $ac_optarg in
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
as_fn_append CONFIG_HEADERS " '$ac_optarg'"
ac_need_defaults=false;;
--he | --h)
# Conflict between --help and --header
as_fn_error $? "ambiguous option: \`$1'
Try \`$0 --help' for more information.";;
--help | --hel | -h )
$as_echo "$ac_cs_usage"; exit ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil | --si | --s)
ac_cs_silent=: ;;
# This is an error.
-*) as_fn_error $? "unrecognized option: \`$1'
Try \`$0 --help' for more information." ;;
*) as_fn_append ac_config_targets " $1"
ac_need_defaults=false ;;
esac
shift
done
ac_configure_extra_args=
if $ac_cs_silent; then
exec 6>/dev/null
ac_configure_extra_args="$ac_configure_extra_args --silent"
fi
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
if \$ac_cs_recheck; then
set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
shift
\$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
CONFIG_SHELL='$SHELL'
export CONFIG_SHELL
exec "\$@"
fi
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
exec 5>>config.log
{
echo
sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
$as_echo "$ac_log"
} >&5
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
#
# INIT-COMMANDS
#
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
sed_quote_subst='$sed_quote_subst'
double_quote_subst='$double_quote_subst'
delay_variable_subst='$delay_variable_subst'
enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
LTCC='$LTCC'
LTCFLAGS='$LTCFLAGS'
compiler='$compiler_DEFAULT'
# A function that is used when there is no print builtin or printf.
func_fallback_echo ()
{
eval 'cat <<_LTECHO_EOF
\$1
_LTECHO_EOF'
}
# Quote evaled strings.
for var in SHELL \
ECHO \
PATH_SEPARATOR \
SED \
GREP \
EGREP \
FGREP \
LD \
NM \
LN_S \
lt_SP2NL \
lt_NL2SP \
reload_flag \
OBJDUMP \
deplibs_check_method \
file_magic_cmd \
file_magic_glob \
want_nocaseglob \
DLLTOOL \
sharedlib_from_linklib_cmd \
AR \
AR_FLAGS \
archiver_list_spec \
STRIP \
RANLIB \
CC \
CFLAGS \
compiler \
lt_cv_sys_global_symbol_pipe \
lt_cv_sys_global_symbol_to_cdecl \
lt_cv_sys_global_symbol_to_c_name_address \
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
nm_file_list_spec \
lt_prog_compiler_no_builtin_flag \
lt_prog_compiler_pic \
lt_prog_compiler_wl \
lt_prog_compiler_static \
lt_cv_prog_compiler_c_o \
need_locks \
MANIFEST_TOOL \
DSYMUTIL \
NMEDIT \
LIPO \
OTOOL \
OTOOL64 \
shrext_cmds \
export_dynamic_flag_spec \
whole_archive_flag_spec \
compiler_needs_object \
with_gnu_ld \
allow_undefined_flag \
no_undefined_flag \
hardcode_libdir_flag_spec \
hardcode_libdir_separator \
exclude_expsyms \
include_expsyms \
file_list_spec \
variables_saved_for_relink \
libname_spec \
library_names_spec \
soname_spec \
install_override_mode \
finish_eval \
old_striplib \
striplib; do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
;;
esac
done
# Double-quote double-evaled strings.
for var in reload_cmds \
old_postinstall_cmds \
old_postuninstall_cmds \
old_archive_cmds \
extract_expsyms_cmds \
old_archive_from_new_cmds \
old_archive_from_expsyms_cmds \
archive_cmds \
archive_expsym_cmds \
module_cmds \
module_expsym_cmds \
export_symbols_cmds \
prelink_cmds \
postlink_cmds \
postinstall_cmds \
postuninstall_cmds \
finish_cmds \
sys_lib_search_path_spec \
sys_lib_dlsearch_path_spec; do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
;;
esac
done
ac_aux_dir='$ac_aux_dir'
xsi_shell='$xsi_shell'
lt_shell_append='$lt_shell_append'
# See if we are running on zsh, and set the options which allow our
# commands through without removal of \ escapes INIT.
if test -n "\${ZSH_VERSION+set}" ; then
setopt NO_GLOB_SUBST
fi
PACKAGE='$PACKAGE'
VERSION='$VERSION'
TIMESTAMP='$TIMESTAMP'
RM='$RM'
ofile='$ofile'
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# Handling of arguments.
for ac_config_target in $ac_config_targets
do
case $ac_config_target in
"config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
"depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
"libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
"src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
"man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;;
*) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
esac
done
# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used. Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi
# Have a temporary directory for convenience. Make it in the build tree
# simply because there is no reason against having it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
# Hook for its removal unless debugging.
# Note that there is a small window in which the directory will not be cleaned:
# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
tmp= ac_tmp=
trap 'exit_status=$?
: "${ac_tmp:=$tmp}"
{ test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
' 0
trap 'as_fn_exit 1' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.
{
tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
test -d "$tmp"
} ||
{
tmp=./conf$$-$RANDOM
(umask 077 && mkdir "$tmp")
} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
ac_tmp=$tmp
# Set up the scripts for CONFIG_FILES section.
# No need to generate them if there are no CONFIG_FILES.
# This happens for instance with `./config.status config.h'.
if test -n "$CONFIG_FILES"; then
ac_cr=`echo X | tr X '\015'`
# On cygwin, bash can eat \r inside `` if the user requested igncr.
# But we know of no other shell where ac_cr would be empty at this
# point, so we can use a bashism as a fallback.
if test "x$ac_cr" = x; then
eval ac_cr=\$\'\\r\'
fi
ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null`
if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
ac_cs_awk_cr='\\r'
else
ac_cs_awk_cr=$ac_cr
fi
echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
_ACEOF
{
echo "cat >conf$$subs.awk <<_ACEOF" &&
echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
echo "_ACEOF"
} >conf$$subs.sh ||
as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
. ./conf$$subs.sh ||
as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
if test $ac_delim_n = $ac_delim_num; then
break
elif $ac_last_try; then
as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
done
rm -f conf$$subs.sh
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
_ACEOF
sed -n '
h
s/^/S["/; s/!.*/"]=/
p
g
s/^[^!]*!//
:repl
t repl
s/'"$ac_delim"'$//
t delim
:nl
h
s/\(.\{148\}\)..*/\1/
t more1
s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
p
n
b repl
:more1
s/["\\]/\\&/g; s/^/"/; s/$/"\\/
p
g
s/.\{148\}//
t nl
:delim
h
s/\(.\{148\}\)..*/\1/
t more2
s/["\\]/\\&/g; s/^/"/; s/$/"/
p
b
:more2
s/["\\]/\\&/g; s/^/"/; s/$/"\\/
p
g
s/.\{148\}//
t delim
' >$CONFIG_STATUS || ac_write_fail=1
rm -f conf$$subs.awk
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
_ACAWK
cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
for (key in S) S_is_set[key] = 1
FS = ""
}
{
line = $ 0
nfields = split(line, field, "@")
substed = 0
len = length(field[1])
for (i = 2; i < nfields; i++) {
key = field[i]
keylen = length(key)
if (S_is_set[key]) {
value = S[key]
line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
len += length(value) + length(field[++i])
substed = 1
} else
len += 1 + keylen
}
print line
}
_ACAWK
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
else
cat
fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
|| as_fn_error $? "could not setup config files machinery" "$LINENO" 5
_ACEOF
# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
h
s///
s/^/:/
s/[ ]*$/:/
s/:\$(srcdir):/:/g
s/:\${srcdir}:/:/g
s/:@srcdir@:/:/g
s/^:*//
s/:*$//
x
s/\(=[ ]*\).*/\1/
G
s/\n//
s/^[^=]*=[ ]*$//
}'
fi
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
fi # test -n "$CONFIG_FILES"
# Set up the scripts for CONFIG_HEADERS section.
# No need to generate them if there are no CONFIG_HEADERS.
# This happens for instance with `./config.status Makefile'.
if test -n "$CONFIG_HEADERS"; then
cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
BEGIN {
_ACEOF
# Transform confdefs.h into an awk script `defines.awk', embedded as
# here-document in config.status, that substitutes the proper values into
# config.h.in to produce config.h.
# Create a delimiter string that does not exist in confdefs.h, to ease
# handling of long lines.
ac_delim='%!_!# '
for ac_last_try in false false :; do
ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
if test -z "$ac_tt"; then
break
elif $ac_last_try; then
as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
done
# For the awk script, D is an array of macro values keyed by name,
# likewise P contains macro parameters if any. Preserve backslash
# newline sequences.
ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
sed -n '
s/.\{148\}/&'"$ac_delim"'/g
t rset
:rset
s/^[ ]*#[ ]*define[ ][ ]*/ /
t def
d
:def
s/\\$//
t bsnl
s/["\\]/\\&/g
s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
D["\1"]=" \3"/p
s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
d
:bsnl
s/["\\]/\\&/g
s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
D["\1"]=" \3\\\\\\n"\\/p
t cont
s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
t cont
d
:cont
n
s/.\{148\}/&'"$ac_delim"'/g
t clear
:clear
s/\\$//
t bsnlc
s/["\\]/\\&/g; s/^/"/; s/$/"/p
d
:bsnlc
s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
b cont
' >$CONFIG_STATUS || ac_write_fail=1
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
for (key in D) D_is_set[key] = 1
FS = ""
}
/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
line = \$ 0
split(line, arg, " ")
if (arg[1] == "#") {
defundef = arg[2]
mac1 = arg[3]
} else {
defundef = substr(arg[1], 2)
mac1 = arg[2]
}
split(mac1, mac2, "(") #)
macro = mac2[1]
prefix = substr(line, 1, index(line, defundef) - 1)
if (D_is_set[macro]) {
# Preserve the white space surrounding the "#".
print prefix "define", macro P[macro] D[macro]
next
} else {
# Replace #undef with comments. This is necessary, for example,
# in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
if (defundef == "undef") {
print "/*", prefix defundef, macro, "*/"
next
}
}
}
{ print }
_ACAWK
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
fi # test -n "$CONFIG_HEADERS"
eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
shift
for ac_tag
do
case $ac_tag in
:[FHLC]) ac_mode=$ac_tag; continue;;
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
:L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
esac
ac_save_IFS=$IFS
IFS=:
set x $ac_tag
IFS=$ac_save_IFS
shift
ac_file=$1
shift
case $ac_mode in
:L) ac_source=$1;;
:[FH])
ac_file_inputs=
for ac_f
do
case $ac_f in
-) ac_f="$ac_tmp/stdin";;
*) # Look for the file first in the build tree, then in the source tree
# (if the path is not absolute). The absolute path cannot be DOS-style,
# because $ac_f cannot contain `:'.
test -f "$ac_f" ||
case $ac_f in
[\\/$]*) false;;
*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
esac ||
as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
esac
case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
as_fn_append ac_file_inputs " '$ac_f'"
done
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated by config.status. */
configure_input='Generated from '`
$as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
`' by configure.'
if test x"$ac_file" != x-; then
configure_input="$ac_file. $configure_input"
{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
$as_echo "$as_me: creating $ac_file" >&6;}
fi
# Neutralize special characters interpreted by sed in replacement strings.
case $configure_input in #(
*\&* | *\|* | *\\* )
ac_sed_conf_input=`$as_echo "$configure_input" |
sed 's/[\\\\&|]/\\\\&/g'`;; #(
*) ac_sed_conf_input=$configure_input;;
esac
case $ac_tag in
*:-:* | *:-) cat >"$ac_tmp/stdin" \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
esac
;;
esac
ac_dir=`$as_dirname -- "$ac_file" ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$ac_file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
as_dir="$ac_dir"; as_fn_mkdir_p
ac_builddir=.
case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
# A ".." for each directory in $ac_dir_suffix.
ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
case $ac_top_builddir_sub in
"") ac_top_builddir_sub=. ac_top_build_prefix= ;;
*) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix
case $srcdir in
.) # We are building in place.
ac_srcdir=.
ac_top_srcdir=$ac_top_builddir_sub
ac_abs_top_srcdir=$ac_pwd ;;
[\\/]* | ?:[\\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir
ac_abs_top_srcdir=$srcdir ;;
*) # Relative name.
ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_build_prefix$srcdir
ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
case $ac_mode in
:F)
#
# CONFIG_FILE
#
case $INSTALL in
[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
*) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
esac
ac_MKDIR_P=$MKDIR_P
case $MKDIR_P in
[\\/$]* | ?:[\\/]* ) ;;
*/*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
esac
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=
ac_sed_dataroot='
/datarootdir/ {
p
q
}
/@datadir@/p
/@docdir@/p
/@infodir@/p
/@localedir@/p
/@mandir@/p'
case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
*datarootdir*) ac_datarootdir_seen=yes;;
*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_datarootdir_hack='
s&@datadir@&$datadir&g
s&@docdir@&$docdir&g
s&@infodir@&$infodir&g
s&@localedir@&$localedir&g
s&@mandir@&$mandir&g
s&\\\${datarootdir}&$datarootdir&g' ;;
esac
_ACEOF
# Neutralize VPATH when `$srcdir' = `.'.
# Shell code in configure.ac might set extrasub.
# FIXME: do we really want to maintain this feature?
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_sed_extra="$ac_vpsub
$extrasub
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s|@configure_input@|$ac_sed_conf_input|;t t
s&@top_builddir@&$ac_top_builddir_sub&;t t
s&@top_build_prefix@&$ac_top_build_prefix&;t t
s&@srcdir@&$ac_srcdir&;t t
s&@abs_srcdir@&$ac_abs_srcdir&;t t
s&@top_srcdir@&$ac_top_srcdir&;t t
s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
s&@builddir@&$ac_builddir&;t t
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
"
eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
>$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
{ ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
{ ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
"$ac_tmp/out"`; test -z "$ac_out"; } &&
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined" >&5
$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined" >&2;}
rm -f "$ac_tmp/stdin"
case $ac_file in
-) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
*) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
esac \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
;;
:H)
#
# CONFIG_HEADER
#
if test x"$ac_file" != x-; then
{
$as_echo "/* $configure_input */" \
&& eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
} >"$ac_tmp/config.h" \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
$as_echo "$as_me: $ac_file is unchanged" >&6;}
else
rm -f "$ac_file"
mv "$ac_tmp/config.h" "$ac_file" \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
fi
else
$as_echo "/* $configure_input */" \
&& eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
|| as_fn_error $? "could not create -" "$LINENO" 5
fi
# Compute "$ac_file"'s index in $config_headers.
_am_arg="$ac_file"
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
$_am_arg | $_am_arg:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$_am_arg" : 'X\(//\)[^/]' \| \
X"$_am_arg" : 'X\(//\)$' \| \
X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$_am_arg" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`/stamp-h$_am_stamp_count
;;
:C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
$as_echo "$as_me: executing $ac_file commands" >&6;}
;;
esac
case $ac_file$ac_mode in
"depfiles":C) test x"$AMDEP_TRUE" != x"" || {
# Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
case $CONFIG_FILES in
*\'*) eval set x "$CONFIG_FILES" ;;
*) set x $CONFIG_FILES ;;
esac
shift
for mf
do
# Strip MF so we end up with the name of the file.
mf=`echo "$mf" | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile or not.
# We used to match only the files named 'Makefile.in', but
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
# Grep'ing the whole file is not good either: AIX grep has a line
# limit of 2048, but all sed's we know have understand at least 4000.
if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
dirpart=`$as_dirname -- "$mf" ||
$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$mf" : 'X\(//\)[^/]' \| \
X"$mf" : 'X\(//\)$' \| \
X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$mf" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
else
continue
fi
# Extract the definition of DEPDIR, am__include, and am__quote
# from the Makefile without running 'make'.
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
test -z "$am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
# simplest approach to changing $(DEPDIR) to its actual value in the
# expansion.
for file in `sed -n "
s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
fdir=`$as_dirname -- "$file" ||
$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$file" : 'X\(//\)[^/]' \| \
X"$file" : 'X\(//\)$' \| \
X"$file" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
as_dir=$dirpart/$fdir; as_fn_mkdir_p
# echo "creating $dirpart/$file"
echo '# dummy' > "$dirpart/$file"
done
done
}
;;
"libtool":C)
# See if we are running on zsh, and set the options which allow our
# commands through without removal of \ escapes.
if test -n "${ZSH_VERSION+set}" ; then
setopt NO_GLOB_SUBST
fi
cfgfile="${ofile}T"
trap "$RM \"$cfgfile\"; exit 1" 1 2 15
$RM "$cfgfile"
cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
# Foundation, Inc.
# Written by Gordon Matzigkeit, 1996
#
# This file is part of GNU Libtool.
#
# GNU Libtool is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# As a special exception to the GNU General Public License,
# if you distribute this file as part of a program or library that
# is built using GNU Libtool, you may include this file under the
# same distribution terms that you use for the rest of that program.
#
# GNU Libtool is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GNU Libtool; see the file COPYING. If not, a copy
# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
# obtained by writing to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
# The names of the tagged configurations supported by this script.
available_tags=""
# ### BEGIN LIBTOOL CONFIG
# Whether or not to build static libraries.
build_old_libs=$enable_static
# Which release of libtool.m4 was used?
macro_version=$macro_version
macro_revision=$macro_revision
# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared
# What type of objects to build.
pic_mode=$pic_mode
# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install
# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL
# An echo program that protects backslashes.
ECHO=$lt_ECHO
# The PATH separator for the build system.
PATH_SEPARATOR=$lt_PATH_SEPARATOR
# The host system.
host_alias=$host_alias
host=$host
host_os=$host_os
# The build system.
build_alias=$build_alias
build=$build
build_os=$build_os
# A sed program that does not truncate output.
SED=$lt_SED
# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="\$SED -e 1s/^X//"
# A grep program that handles long lines.
GREP=$lt_GREP
# An ERE matcher.
EGREP=$lt_EGREP
# A literal string matcher.
FGREP=$lt_FGREP
# A BSD- or MS-compatible name lister.
NM=$lt_NM
# Whether we need soft or hard links.
LN_S=$lt_LN_S
# What is the maximum length of a command?
max_cmd_len=$max_cmd_len
# Object file suffix (normally "o").
objext=$ac_objext
# Executable file suffix (normally "").
exeext=$exeext
# whether the shell understands "unset".
lt_unset=$lt_unset
# turn spaces into newlines.
SP2NL=$lt_lt_SP2NL
# turn newlines into spaces.
NL2SP=$lt_lt_NL2SP
# convert \$build file names to \$host format.
to_host_file_cmd=$lt_cv_to_host_file_cmd
# convert \$build files to toolchain format.
to_tool_file_cmd=$lt_cv_to_tool_file_cmd
# An object symbol dumper.
OBJDUMP=$lt_OBJDUMP
# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method
# Command to use when deplibs_check_method = "file_magic".
file_magic_cmd=$lt_file_magic_cmd
# How to find potential files when deplibs_check_method = "file_magic".
file_magic_glob=$lt_file_magic_glob
# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
want_nocaseglob=$lt_want_nocaseglob
# DLL creation program.
DLLTOOL=$lt_DLLTOOL
# Command to associate shared and link libraries.
sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
# The archiver.
AR=$lt_AR
# Flags to create an archive.
AR_FLAGS=$lt_AR_FLAGS
# How to feed a file listing to the archiver.
archiver_list_spec=$lt_archiver_list_spec
# A symbol stripping program.
STRIP=$lt_STRIP
# Commands used to install an old-style archive.
RANLIB=$lt_RANLIB
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds
# Whether to use a lock for old archive extraction.
lock_old_archive_extraction=$lock_old_archive_extraction
# A C compiler.
LTCC=$lt_CC
# LTCC compiler flags.
LTCFLAGS=$lt_CFLAGS
# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
# Transform the output of nm in a proper C declaration.
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
# Transform the output of nm in a C name address pair.
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
# Transform the output of nm in a C name address pair when lib prefix is needed.
global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
# Specify filename containing input files for \$NM.
nm_file_list_spec=$lt_nm_file_list_spec
# The root where to search for dependent libraries,and in which our libraries should be installed.
lt_sysroot=$lt_sysroot
# The name of the directory that contains temporary libtool files.
objdir=$objdir
# Used to examine libraries when file_magic_cmd begins with "file".
MAGIC_CMD=$MAGIC_CMD
# Must we lock files when doing compilation?
need_locks=$lt_need_locks
# Manifest tool.
MANIFEST_TOOL=$lt_MANIFEST_TOOL
# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
DSYMUTIL=$lt_DSYMUTIL
# Tool to change global to local symbols on Mac OS X.
NMEDIT=$lt_NMEDIT
# Tool to manipulate fat objects and archives on Mac OS X.
LIPO=$lt_LIPO
# ldd/readelf like tool for Mach-O binaries on Mac OS X.
OTOOL=$lt_OTOOL
# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
OTOOL64=$lt_OTOOL64
# Old archive suffix (normally "a").
libext=$libext
# Shared library suffix (normally ".so").
shrext_cmds=$lt_shrext_cmds
# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds
# Variables whose values should be saved in libtool wrapper scripts and
# restored at link time.
variables_saved_for_relink=$lt_variables_saved_for_relink
# Do we need the "lib" prefix for modules?
need_lib_prefix=$need_lib_prefix
# Do we need a version for libraries?
need_version=$need_version
# Library versioning type.
version_type=$version_type
# Shared library runtime path variable.
runpath_var=$runpath_var
# Shared library path variable.
shlibpath_var=$shlibpath_var
# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath
# Format of library name prefix.
libname_spec=$lt_libname_spec
# List of archive names. First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME
library_names_spec=$lt_library_names_spec
# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec
# Permission mode override for installation of shared libraries.
install_override_mode=$lt_install_override_mode
# Command to use after installation of a shared archive.
postinstall_cmds=$lt_postinstall_cmds
# Command to use after uninstallation of a shared archive.
postuninstall_cmds=$lt_postuninstall_cmds
# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds
# As "finish_cmds", except a single script fragment to be evaled but
# not shown.
finish_eval=$lt_finish_eval
# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs
# Compile-time system search path for libraries.
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
# Run-time system search path for libraries.
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
# Whether dlopen is supported.
dlopen_support=$enable_dlopen
# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self
# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static
# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib
# The linker used to build libraries.
LD=$lt_LD
# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds
# Commands used to build an old-style archive.
old_archive_cmds=$lt_old_archive_cmds
# A language specific compiler.
CC=$lt_compiler
# Is the compiler the GNU compiler?
with_gcc=$GCC
# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic
# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl
# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o
# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc
# Whether or not to disallow shared libs when runtime libs are static.
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec
# Whether the compiler copes with passing no objects directly.
compiler_needs_object=$lt_compiler_needs_object
# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
# Commands used to build a shared archive.
archive_cmds=$lt_archive_cmds
archive_expsym_cmds=$lt_archive_expsym_cmds
# Commands used to build a loadable module if different from building
# a shared archive.
module_cmds=$lt_module_cmds
module_expsym_cmds=$lt_module_expsym_cmds
# Whether we are building with GNU ld or not.
with_gnu_ld=$lt_with_gnu_ld
# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag
# Flag that enforces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag
# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator
# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct
# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute
# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
# into the resulting binary.
hardcode_minus_L=$hardcode_minus_L
# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
# into the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var
# Set to "yes" if building a shared library automatically hardcodes DIR
# into the library and all subsequent libraries and executables linked
# against it.
hardcode_automatic=$hardcode_automatic
# Set to yes if linker adds runtime paths of dependent libraries
# to runtime path list.
inherit_rpath=$inherit_rpath
# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs
# Set to "yes" if exported symbols are required.
always_export_symbols=$always_export_symbols
# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds
# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms
# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms
# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=$lt_prelink_cmds
# Commands necessary for finishing linking programs.
postlink_cmds=$lt_postlink_cmds
# Specify filename containing input files.
file_list_spec=$lt_file_list_spec
# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action
# ### END LIBTOOL CONFIG
_LT_EOF
case $host_os in
aix3*)
cat <<\_LT_EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test "X${COLLECT_NAMES+set}" != Xset; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
_LT_EOF
;;
esac
ltmain="$ac_aux_dir/ltmain.sh"
# We use sed instead of cat because bash on DJGPP gets confused if
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
sed '$q' "$ltmain" >> "$cfgfile" \
|| (rm -f "$cfgfile"; exit 1)
if test x"$xsi_shell" = xyes; then
sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
func_dirname ()\
{\
\ case ${1} in\
\ */*) func_dirname_result="${1%/*}${2}" ;;\
\ * ) func_dirname_result="${3}" ;;\
\ esac\
} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
&& mv -f "$cfgfile.tmp" "$cfgfile" \
|| (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
test 0 -eq $? || _lt_function_replace_fail=:
sed -e '/^func_basename ()$/,/^} # func_basename /c\
func_basename ()\
{\
\ func_basename_result="${1##*/}"\
} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
&& mv -f "$cfgfile.tmp" "$cfgfile" \
|| (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
test 0 -eq $? || _lt_function_replace_fail=:
sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
func_dirname_and_basename ()\
{\
\ case ${1} in\
\ */*) func_dirname_result="${1%/*}${2}" ;;\
\ * ) func_dirname_result="${3}" ;;\
\ esac\
\ func_basename_result="${1##*/}"\
} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
&& mv -f "$cfgfile.tmp" "$cfgfile" \
|| (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
test 0 -eq $? || _lt_function_replace_fail=:
sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
func_stripname ()\
{\
\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
\ # positional parameters, so assign one to ordinary parameter first.\
\ func_stripname_result=${3}\
\ func_stripname_result=${func_stripname_result#"${1}"}\
\ func_stripname_result=${func_stripname_result%"${2}"}\
} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
&& mv -f "$cfgfile.tmp" "$cfgfile" \
|| (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
test 0 -eq $? || _lt_function_replace_fail=:
sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
func_split_long_opt ()\
{\
\ func_split_long_opt_name=${1%%=*}\
\ func_split_long_opt_arg=${1#*=}\
} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
&& mv -f "$cfgfile.tmp" "$cfgfile" \
|| (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
test 0 -eq $? || _lt_function_replace_fail=:
sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
func_split_short_opt ()\
{\
\ func_split_short_opt_arg=${1#??}\
\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
&& mv -f "$cfgfile.tmp" "$cfgfile" \
|| (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
test 0 -eq $? || _lt_function_replace_fail=:
sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
func_lo2o ()\
{\
\ case ${1} in\
\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
\ *) func_lo2o_result=${1} ;;\
\ esac\
} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
&& mv -f "$cfgfile.tmp" "$cfgfile" \
|| (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
test 0 -eq $? || _lt_function_replace_fail=:
sed -e '/^func_xform ()$/,/^} # func_xform /c\
func_xform ()\
{\
func_xform_result=${1%.*}.lo\
} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
&& mv -f "$cfgfile.tmp" "$cfgfile" \
|| (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
test 0 -eq $? || _lt_function_replace_fail=:
sed -e '/^func_arith ()$/,/^} # func_arith /c\
func_arith ()\
{\
func_arith_result=$(( $* ))\
} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
&& mv -f "$cfgfile.tmp" "$cfgfile" \
|| (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
test 0 -eq $? || _lt_function_replace_fail=:
sed -e '/^func_len ()$/,/^} # func_len /c\
func_len ()\
{\
func_len_result=${#1}\
} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
&& mv -f "$cfgfile.tmp" "$cfgfile" \
|| (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
test 0 -eq $? || _lt_function_replace_fail=:
fi
if test x"$lt_shell_append" = xyes; then
sed -e '/^func_append ()$/,/^} # func_append /c\
func_append ()\
{\
eval "${1}+=\\${2}"\
} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
&& mv -f "$cfgfile.tmp" "$cfgfile" \
|| (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
test 0 -eq $? || _lt_function_replace_fail=:
sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
func_append_quoted ()\
{\
\ func_quote_for_eval "${2}"\
\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
&& mv -f "$cfgfile.tmp" "$cfgfile" \
|| (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
test 0 -eq $? || _lt_function_replace_fail=:
# Save a `func_append' function call where possible by direct use of '+='
sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
&& mv -f "$cfgfile.tmp" "$cfgfile" \
|| (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
test 0 -eq $? || _lt_function_replace_fail=:
else
# Save a `func_append' function call even when '+=' is not available
sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
&& mv -f "$cfgfile.tmp" "$cfgfile" \
|| (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
test 0 -eq $? || _lt_function_replace_fail=:
fi
if test x"$_lt_function_replace_fail" = x":"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
fi
mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
;;
esac
done # for ac_tag
as_fn_exit 0
_ACEOF
ac_clean_files=$ac_clean_files_save
test $ac_write_fail = 0 ||
as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
# Unfortunately, on DOS this fails, as config.log is still kept open
# by configure, so config.status won't be able to write to it; its
# output is simply discarded. So we exec the FD to /dev/null,
# effectively closing config.log, so it can be properly (re)opened and
# appended to by config.status. When coming back to configure, we
# need to make the FD available again.
if test "$no_create" != yes; then
ac_cs_success=:
ac_config_status_args=
test "$silent" = yes &&
ac_config_status_args="$ac_config_status_args --quiet"
exec 5>/dev/null
$SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
$ac_cs_success || as_fn_exit 1
fi
if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
fi
xf86-video-neomagic-1.2.9/INSTALL 0000644 0001750 0001750 00000036600 12523103404 013153 0000000 0000000 Installation Instructions
*************************
Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved. This file is offered as-is,
without warranty of any kind.
Basic Installation
==================
Briefly, the shell commands `./configure; make; make install' should
configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
instructions specific to this package. Some packages provide this
`INSTALL' file but do not implement all of the features documented
below. The lack of an optional feature in a given package is not
necessarily a bug. More recommendations for GNU packages can be found
in *note Makefile Conventions: (standards)Makefile Conventions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring. Caching is
disabled by default to prevent problems with accidental use of stale
cache files.
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If you are using the cache, and at
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'. You need `configure.ac' if
you want to change it or regenerate `configure' using a newer version
of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system.
Running `configure' might take a while. While running, it prints
some messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
the package, generally using the just-built uninstalled binaries.
4. Type `make install' to install the programs and any data files and
documentation. When installing into a prefix owned by root, it is
recommended that the package be configured and built as a regular
user, and only the `make install' phase executed with root
privileges.
5. Optionally, type `make installcheck' to repeat any self-tests, but
this time using the binaries in their final installed location.
This target does not install anything. Running this target as a
regular user, particularly if the prior `make install' required
root privileges, verifies that the installation completed
correctly.
6. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
7. Often, you can also type `make uninstall' to remove the installed
files again. In practice, not all packages have tested that
uninstallation works correctly, even though it is required by the
GNU Coding Standards.
8. Some packages, particularly those that use Automake, provide `make
distcheck', which can by used by developers to test that all other
targets like `make install' and `make uninstall' work correctly.
This target is generally not run by end users.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
the `configure' script does not know about. Run `./configure --help'
for details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
./configure CC=c99 CFLAGS=-g LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'. This
is known as a "VPATH" build.
With a non-GNU `make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
installed the package for one architecture, use `make distclean' before
reconfiguring for another architecture.
On MacOS X 10.5 and later systems, you can create libraries and
executables that work on multiple system types--known as "fat" or
"universal" binaries--by specifying multiple `-arch' options to the
compiler but only a single `-arch' option to the preprocessor. Like
this:
./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CPP="gcc -E" CXXCPP="g++ -E"
This is not guaranteed to produce working output in all cases, you
may have to build one architecture at a time and combine the results
using the `lipo' tool if you have problems.
Installation Names
==================
By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX', where PREFIX must be an
absolute file name.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
pass the option `--exec-prefix=PREFIX' to `configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them. In general, the
default for these options is expressed in terms of `${prefix}', so that
specifying just `--prefix' will affect all of the other directory
specifications that were not explicitly provided.
The most portable way to affect installation locations is to pass the
correct locations to `configure'; however, many packages provide one or
both of the following shortcuts of passing variable assignments to the
`make install' command line to change installation locations without
having to reconfigure or recompile.
The first method involves providing an override variable for each
affected directory. For example, `make install
prefix=/alternate/directory' will choose an alternate location for all
directory configuration variables that were expressed in terms of
`${prefix}'. Any directories that were specified during `configure',
but not in terms of `${prefix}', must each be overridden at install
time for the entire installation to be relocated. The approach of
makefile variable overrides for each directory variable is required by
the GNU Coding Standards, and ideally causes no recompilation.
However, some platforms have known limitations with the semantics of
shared libraries that end up requiring recompilation when using this
method, particularly noticeable in packages that use GNU Libtool.
The second method involves providing the `DESTDIR' variable. For
example, `make install DESTDIR=/alternate/directory' will prepend
`/alternate/directory' before all installation names. The approach of
`DESTDIR' overrides is not required by the GNU Coding Standards, and
does not work on platforms that have drive letters. On the other hand,
it does better at avoiding recompilation issues, and works well even
when some directory options were not specified in terms of `${prefix}'
at `configure' time.
Optional Features
=================
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Some packages offer the ability to configure how verbose the
execution of `make' will be. For these packages, running `./configure
--enable-silent-rules' sets the default to minimal output, which can be
overridden with `make V=1'; while running `./configure
--disable-silent-rules' sets the default to verbose, which can be
overridden with `make V=0'.
Particular systems
==================
On HP-UX, the default C compiler is not ANSI C compatible. If GNU
CC is not installed, it is recommended to use the following options in
order to use an ANSI C compiler:
./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
and if that doesn't work, install pre-built binaries of GCC for HP-UX.
HP-UX `make' updates targets which have the same time stamps as
their prerequisites, which makes it generally unusable when shipped
generated files such as `configure' are involved. Use GNU `make'
instead.
On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
parse its `' header file. The option `-nodtk' can be used as
a workaround. If GNU CC is not installed, it is therefore recommended
to try
./configure CC="cc"
and if that doesn't work, try
./configure CC="cc -nodtk"
On Solaris, don't put `/usr/ucb' early in your `PATH'. This
directory contains several dysfunctional programs; working variants of
these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
in your `PATH', put it _after_ `/usr/bin'.
On Haiku, software installed for all users goes in `/boot/common',
not `/usr/local'. It is recommended to use the following options:
./configure --prefix=/boot/common
Specifying the System Type
==========================
There may be some features `configure' cannot figure out
automatically, but needs to determine by the type of machine the package
will run on. Usually, assuming the package is built to be run on the
_same_ architectures, `configure' can figure that out, but if it prints
a message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
where SYSTEM can have one of these forms:
OS
KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
use the option `--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with `--host=TYPE'.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Defining Variables
==================
Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
Unfortunately, this technique does not work for `CONFIG_SHELL' due to
an Autoconf bug. Until the bug is fixed you can use this workaround:
CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
`configure' Invocation
======================
`configure' recognizes the following options to control how it
operates.
`--help'
`-h'
Print a summary of all of the options to `configure', and exit.
`--help=short'
`--help=recursive'
Print a summary of the options unique to this package's
`configure', and exit. The `short' variant lists options used
only in the top level, while the `recursive' variant lists options
also present in any nested packages.
`--version'
`-V'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally `config.cache'. FILE defaults to `/dev/null' to
disable caching.
`--config-cache'
`-C'
Alias for `--cache-file=config.cache'.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`--prefix=DIR'
Use DIR as the installation prefix. *note Installation Names::
for more details, including other options available for fine-tuning
the installation locations.
`--no-create'
`-n'
Run the configure checks, but stop before creating any output
files.
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.
xf86-video-neomagic-1.2.9/compile 0000755 0001750 0001750 00000016245 12523102723 013506 0000000 0000000 #! /bin/sh
# Wrapper for compilers which do not understand '-c -o'.
scriptversion=2012-10-14.11; # UTC
# Copyright (C) 1999-2013 Free Software Foundation, Inc.
# Written by Tom Tromey .
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is maintained in Automake, please report
# bugs to or send patches to
# .
nl='
'
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent tools from complaining about whitespace usage.
IFS=" "" $nl"
file_conv=
# func_file_conv build_file lazy
# Convert a $build file to $host form and store it in $file
# Currently only supports Windows hosts. If the determined conversion
# type is listed in (the comma separated) LAZY, no conversion will
# take place.
func_file_conv ()
{
file=$1
case $file in
/ | /[!/]*) # absolute file, and not a UNC file
if test -z "$file_conv"; then
# lazily determine how to convert abs files
case `uname -s` in
MINGW*)
file_conv=mingw
;;
CYGWIN*)
file_conv=cygwin
;;
*)
file_conv=wine
;;
esac
fi
case $file_conv/,$2, in
*,$file_conv,*)
;;
mingw/*)
file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
;;
cygwin/*)
file=`cygpath -m "$file" || echo "$file"`
;;
wine/*)
file=`winepath -w "$file" || echo "$file"`
;;
esac
;;
esac
}
# func_cl_dashL linkdir
# Make cl look for libraries in LINKDIR
func_cl_dashL ()
{
func_file_conv "$1"
if test -z "$lib_path"; then
lib_path=$file
else
lib_path="$lib_path;$file"
fi
linker_opts="$linker_opts -LIBPATH:$file"
}
# func_cl_dashl library
# Do a library search-path lookup for cl
func_cl_dashl ()
{
lib=$1
found=no
save_IFS=$IFS
IFS=';'
for dir in $lib_path $LIB
do
IFS=$save_IFS
if $shared && test -f "$dir/$lib.dll.lib"; then
found=yes
lib=$dir/$lib.dll.lib
break
fi
if test -f "$dir/$lib.lib"; then
found=yes
lib=$dir/$lib.lib
break
fi
if test -f "$dir/lib$lib.a"; then
found=yes
lib=$dir/lib$lib.a
break
fi
done
IFS=$save_IFS
if test "$found" != yes; then
lib=$lib.lib
fi
}
# func_cl_wrapper cl arg...
# Adjust compile command to suit cl
func_cl_wrapper ()
{
# Assume a capable shell
lib_path=
shared=:
linker_opts=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as 'compile cc -o foo foo.c'.
eat=1
case $2 in
*.o | *.[oO][bB][jJ])
func_file_conv "$2"
set x "$@" -Fo"$file"
shift
;;
*)
func_file_conv "$2"
set x "$@" -Fe"$file"
shift
;;
esac
;;
-I)
eat=1
func_file_conv "$2" mingw
set x "$@" -I"$file"
shift
;;
-I*)
func_file_conv "${1#-I}" mingw
set x "$@" -I"$file"
shift
;;
-l)
eat=1
func_cl_dashl "$2"
set x "$@" "$lib"
shift
;;
-l*)
func_cl_dashl "${1#-l}"
set x "$@" "$lib"
shift
;;
-L)
eat=1
func_cl_dashL "$2"
;;
-L*)
func_cl_dashL "${1#-L}"
;;
-static)
shared=false
;;
-Wl,*)
arg=${1#-Wl,}
save_ifs="$IFS"; IFS=','
for flag in $arg; do
IFS="$save_ifs"
linker_opts="$linker_opts $flag"
done
IFS="$save_ifs"
;;
-Xlinker)
eat=1
linker_opts="$linker_opts $2"
;;
-*)
set x "$@" "$1"
shift
;;
*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
func_file_conv "$1"
set x "$@" -Tp"$file"
shift
;;
*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
func_file_conv "$1" mingw
set x "$@" "$file"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -n "$linker_opts"; then
linker_opts="-link$linker_opts"
fi
exec "$@" $linker_opts
exit 1
}
eat=
case $1 in
'')
echo "$0: No command. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: compile [--help] [--version] PROGRAM [ARGS]
Wrapper for compilers which do not understand '-c -o'.
Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
arguments, and rename the output as expected.
If you are trying to build a whole package this is not the
right script to run: please start by reading the file 'INSTALL'.
Report bugs to .
EOF
exit $?
;;
-v | --v*)
echo "compile $scriptversion"
exit $?
;;
cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
func_cl_wrapper "$@" # Doesn't return...
;;
esac
ofile=
cfile=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as 'compile cc -o foo foo.c'.
# So we strip '-o arg' only if arg is an object.
eat=1
case $2 in
*.o | *.obj)
ofile=$2
;;
*)
set x "$@" -o "$2"
shift
;;
esac
;;
*.c)
cfile=$1
set x "$@" "$1"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -z "$ofile" || test -z "$cfile"; then
# If no '-o' option was seen then we might have been invoked from a
# pattern rule where we don't need one. That is ok -- this is a
# normal compilation that the losing compiler can handle. If no
# '.c' file was seen then we are probably linking. That is also
# ok.
exec "$@"
fi
# Name of file we expect compiler to create.
cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
# Create the lock directory.
# Note: use '[/\\:.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
while true; do
if mkdir "$lockdir" >/dev/null 2>&1; then
break
fi
sleep 1
done
# FIXME: race condition here if user kills between mkdir and trap.
trap "rmdir '$lockdir'; exit 1" 1 2 15
# Run the compile.
"$@"
ret=$?
if test -f "$cofile"; then
test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
elif test -f "${cofile}bj"; then
test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
fi
rmdir "$lockdir"
exit $ret
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:
xf86-video-neomagic-1.2.9/ChangeLog 0000644 0001750 0001750 00000067632 12523103404 013705 0000000 0000000 commit f0a61bc00011b0497edc79cf6fa11ae88a227df9
Author: Julien Cristau
Date: Fri May 8 11:48:52 2015 +0200
Bump to 1.2.9
Signed-off-by: Julien Cristau
commit b9399b8880e97af8b66d981ad3edd498e76d2e16
Author: Julien Cristau
Date: Fri May 8 11:47:58 2015 +0200
Fix compiler warning with recent X servers
xf86GetOptValString was changed to return const char *.
Signed-off-by: Julien Cristau
commit 6661bdd4551e4e63e983685464a277845aed3012
Author: Dave Airlie
Date: Sun Sep 21 09:51:37 2014 +1000
neomagic: fix build against master X server.
Signed-off-by: Dave Airlie
commit 74a9a343f6e156d24539b81f1224b7410acf0e38
Author: Adam Jackson
Date: Wed May 21 14:07:53 2014 -0400
Use own thunk functions instead of vgaHW*Weak
I plan to remove the Weak functions from a future server
Signed-off-by: Adam Jackson
commit a559a07989265a84ee31530a2b002899b40389ae
Author: Matt Turner
Date: Fri Aug 16 11:12:14 2013 -0700
xf86-video-neomagic 1.2.8
Signed-off-by: Matt Turner
commit d7c14dfbac1b50ad484c0070075f060b53783550
Author: Matthieu Herrb
Date: Thu Jun 13 23:38:13 2013 +0200
Unbreak shadowfb initialization with modern X servers.
Bugzilla: https://bugs.gentoo.org/show_bug.cgi?id=434468
Signed-off-by: Matthieu Herrb
Signed-off-by: Matt Turner
commit 005d61313e989bf054b1cc2190f1c743362d86ff
Author: Adam Jackson
Date: Tue Sep 25 08:54:44 2012 -0400
Remove mibstore.h
Signed-off-by: Adam Jackson
commit bc78be1c268d02c91926425cdf09ba1f7f1e3879
Author: Matt Turner
Date: Sun Sep 9 14:07:22 2012 -0700
Don't check for unneeded proto headers
DGA unneeded since b6633ee7, others probably never needed.
Signed-off-by: Matt Turner
commit a419c141d67728f84fdb376257618fe199154d29
Author: Matt Turner
Date: Sun Sep 9 13:29:24 2012 -0700
Remove uses of xf86PciInfo.h
Signed-off-by: Matt Turner
commit 3a4cd45c63671f89bed7b1c9cc518ac028c189d3
Author: Matt Turner
Date: Sun Sep 9 13:23:35 2012 -0700
Add &component=Driver/Neomagic to Bugzilla link
Signed-off-by: Matt Turner
commit 66f7229838ce725cff0813a9eae02ed452204ad1
Author: Matt Turner
Date: Sun Sep 9 13:10:24 2012 -0700
Don't call NEO_Sync with no XAA
The commit that makes XAA optional left a use of NEO_Sync while putting
the body inside an #ifdef HAVE_XAA_H block, which caused undefined
symbol errors when loading the driver. NEO_Sync doesn't do anything
without XAA, so don't bother calling it without XAA.
Bugzilla: https://bugs.gentoo.org/show_bug.cgi?id=434468
Reviewed-by: Alex Deucher
commit 7a10cbda5a0a9ae31e33c5cc77c6b1bda8cae852
Author: Dave Airlie
Date: Tue Jul 17 16:05:09 2012 +1000
xf86-video-neomagic: bump to version 1.2.7
Signed-off-by: Dave Airlie
commit 808aa999ad78ccc3384d08d501d43688795bee5e
Author: Dave Airlie
Date: Mon Jul 16 03:29:55 2012 +0100
neomagic: fix build when XAA is unavailable.
Signed-off-by: Dave Airlie
commit 9b33cc9fe94d97c8b954a3614ead34622d293bc3
Author: Dave Airlie
Date: Wed Jun 6 12:21:55 2012 +0100
neomagic: port to new compat API.
Signed-off-by: Dave Airlie
commit 3b06ee079494b0d08913a9f724c3661f9ac35907
Author: Adam Jackson
Date: Wed Apr 18 10:50:28 2012 -0400
Use DamageRegion for shadow damage
The 'damage' member is an ancient compatibility hack I want to destroy.
Signed-off-by: Adam Jackson
commit 25c7bb8b063777f31db678db743191265f17e7be
Author: Alan Coopersmith
Date: Fri Mar 23 19:08:03 2012 -0700
xf86-video-neomagic 1.2.6
Signed-off-by: Alan Coopersmith
commit 819c8f2119b8db10a6a9e4553cf88d66cff6eb8e
Author: Adam Jackson
Date: Mon Dec 19 16:51:31 2011 -0500
Fix for new vgahw ABI
Signed-off-by: Adam Jackson
commit 07845a120a674380b6b499961e6c81accfdd6a2e
Author: Adam Jackson
Date: Mon Dec 19 16:50:28 2011 -0500
Fall back to shadowfb when XAA is unavailable
Signed-off-by: Adam Jackson
commit f2a771c6d2a2308245a0d46301e579b50fb2b6bd
Author: Jeremy Huddleston
Date: Tue Oct 11 10:45:11 2011 -0700
Include for abs()
Signed-off-by: Jeremy Huddleston
commit c3cf7e328d7e9c276a3e237dbf9d1772b57a370e
Author: Jeremy Huddleston
Date: Tue Oct 11 10:43:51 2011 -0700
Use malloc/calloc/realloc/free directly
Signed-off-by: Jeremy Huddleston
commit a9d69f6d0ab4f66b954949cca016ee7b5b6f7adf
Author: Jesse Adkins
Date: Tue Sep 28 13:29:51 2010 -0700
Purge cvs tags.
Signed-off-by: Jesse Adkins
Signed-off-by: Alan Coopersmith
commit dd32df772bdf4462b816bfc2f98ccd18dbb4b930
Author: Gaetan Nadon
Date: Wed Jul 21 16:49:04 2010 -0400
config: add comments for main statements
commit 5e0d301758b15fc1916dd0318f2a5549e3482ccf
Author: Gaetan Nadon
Date: Wed Jul 21 16:07:00 2010 -0400
config: replace deprecated use of AC_OUTPUT with AC_CONFIG_FILES
Signed-off-by: Gaetan Nadon
commit 8486ae164b462d50817b84340af13dccc26384ab
Author: Gaetan Nadon
Date: Wed Jul 21 14:37:41 2010 -0400
config: replace deprecated AC_HELP_STRING with AS_HELP_STRING
Signed-off-by: Gaetan Nadon
commit 2f60a6e4c3be390d4cf0648bdffbdbff67def7ee
Author: Gaetan Nadon
Date: Wed Jul 21 14:05:22 2010 -0400
config: replace deprecated AM_CONFIG_HEADER with AC_CONFIG_HEADERS
Signed-off-by: Gaetan Nadon
commit bcfba240265ecd633fcba051591b6c50b9373a53
Author: Gaetan Nadon
Date: Wed Jul 21 09:27:42 2010 -0400
config: complete AC_INIT m4 quoting
Signed-off-by: Gaetan Nadon
commit 5759eca769091518fd54e0d70193edc3c099e9bb
Author: Gaetan Nadon
Date: Tue Jul 20 21:44:57 2010 -0400
config: remove unrequired AC_SUBST([XORG_CFLAGS])
This macro is called by PKG_CHECK_MODULES
Signed-off-by: Gaetan Nadon
commit adb592292e40a5e5f032ca95f3371c6b77227c40
Author: Gaetan Nadon
Date: Tue Jul 20 20:24:42 2010 -0400
config: remove unrequired AC_HEADER_STDC
Autoconf says:
"This macro is obsolescent, as current systems have conforming
header files. New programs need not use this macro".
Signed-off-by: Gaetan Nadon
commit 788fa461f40c320c3b9a67ab9bc914e987eefd42
Author: Gaetan Nadon
Date: Tue Jul 20 19:41:31 2010 -0400
config: remove AC_PROG_CC as it overrides AC_PROG_C_C99
XORG_STRICT_OPTION from XORG_DEFAULT_OPTIONS calls
AC_PROG_C_C99. This sets gcc with -std=gnu99.
If AC_PROG_CC macro is called afterwards, it resets CC to gcc.
Signed-off-by: Gaetan Nadon
commit 9ad3e98825d45208ed2754f592527a05949f676d
Author: Gaetan Nadon
Date: Tue Jul 20 18:45:19 2010 -0400
config: update AC_PREREQ statement to 2.60
Unrelated to the previous patches, the new value simply reflects
the reality that the minimum level for autoconf to configure
all x.org modules is 2.60 dated June 2006.
ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.60.tar.gz
Signed-off-by: Gaetan Nadon
commit eba90ed039416fa5db1800ce695d2a970f43b0e0
Author: Gaetan Nadon
Date: Tue Jul 20 16:15:29 2010 -0400
config: upgrade to util-macros 1.8 for additional man page support
Use MAN_SUBST now supplied in XORG_MANPAGE_SECTIONS
The value of MAN_SUBST is the same for all X.Org packages.
commit 77faeb2222ed86622b2d3bf5291b1a7f470b1382
Author: Dave Airlie
Date: Mon Jul 5 14:48:07 2010 +1000
neomagic 1.2.5
commit 73bc0507b0b772717356a7fa8a15442022a8c3c7
Author: Jamey Sharp
Date: Sun Jun 13 17:28:06 2010 -0700
Revert "Adding experimental pseudocolor overlay stuff to NeoMagic driver."
ajax removed the key parts of that patch two years ago in commit
dc2a372ad7edf34417d7d7042562b601e4f0041c. This patch reverts the rest of
commit 57cea11892e956f4e6f07005e05d121fa48c3059, aside from whitespace
changes.
Signed-off-by: Jamey Sharp
commit e2234bd3d37239f5ac0182a3a8b3db23ba5ffbac
Author: Gaetan Nadon
Date: Sat Jun 12 20:44:46 2010 -0400
COPYING: replace stub file with actual Copyright notices.
Signed-off-by: Gaetan Nadon
commit fdfd0902f858d068b8ee100b34249e7a53252d14
Author: Gaetan Nadon
Date: Sat Mar 27 09:55:13 2010 -0400
config: remove TODO from EXTRA_DIST
Automake always distribute the TODO file.
Signed-off-by: Gaetan Nadon
commit 958353fc567f989a2c6c6ef73625f99de896a68d
Author: Alan Coopersmith
Date: Fri Jan 15 15:00:16 2010 -0800
Update Sun license notices to current X.Org standard form
Signed-off-by: Alan Coopersmith
commit dbcbef42e4ea74e20313e4f5437067cc5cfb7024
Author: Gaetan Nadon
Date: Tue Dec 15 22:01:02 2009 -0500
configure.ac: remove unused sdkdir=$(pkg-config...) statement
The sdkdir variable isn't use, so remove the statement.
Acked-by: Dan Nicholson
Signed-off-by: Gaetan Nadon
commit 4174c802bdac50bd62981bf548efa84ee15bf2b2
Author: Adam Jackson
Date: Wed Dec 30 12:50:10 2009 -0500
Remove banked framebuffer mode
Signed-off-by: Adam Jackson
commit b6633ee77513ccb99a2301e3d3625688c842ce7b
Author: Adam Jackson
Date: Wed Dec 30 12:17:52 2009 -0500
Remove old DGA header stanza
Signed-off-by: Adam Jackson
commit eb2b36e969964312afa16e01aa874b52256a3ea9
Author: Gaetan Nadon
Date: Mon Nov 23 09:25:05 2009 -0500
Makefile.am: add ChangeLog and INSTALL on MAINTAINERCLEANFILES
Now that the INSTALL file is generated.
Allows running make maintainer-clean.
commit b28cb14da7e09f0a170a65624242d6112be1ce99
Author: Gaetan Nadon
Date: Wed Oct 28 14:41:41 2009 -0400
INSTALL, NEWS, README or AUTHORS files are missing/incorrect #24206
Automake 'foreign' option is specified in configure.ac.
Remove from Makefile.am
commit c094377f59080145744b9299f89e290dbd99e37e
Author: Gaetan Nadon
Date: Wed Oct 28 14:09:09 2009 -0400
INSTALL, NEWS, README or AUTHORS files are missing/incorrect #24206
Add missing INSTALL file. Use standard GNU file on building tarball
README may have been updated
Remove AUTHORS file as it is empty and no content available yet.
Remove NEWS file as it is empty and no content available yet.
commit f34c1b10cce4919533db164212fd4bf166f8be5d
Author: Gaetan Nadon
Date: Mon Oct 26 12:54:21 2009 -0400
Several driver modules do not have a ChangeLog target in Makefile.am #23814
The git generated ChangeLog replaces the hand written one.
Update configure.ac to xorg-macros level 1.3.
Use XORG_DEFAULT_OPTIONS which replaces four XORG_* macros
Update Makefile.am to add ChangeLog target if missing
Remove ChangeLog from EXTRA_DIST or *CLEAN variables
This is a pre-req for the INSTALL_CMD
commit 8f4212f3cef01e591172ba16c745996fe98f5e29
Author: Gaetan Nadon
Date: Thu Oct 22 12:34:17 2009 -0400
.gitignore: use common defaults with custom section # 24239
Using common defaults will reduce errors and maintenance.
Only the very small or inexistent custom section need periodic maintenance
when the structure of the component changes. Do not edit defaults.
commit 4e2afb88212582df60bca3ec8c447965a5a66fd5
Author: Adam Jackson
Date: Mon Oct 26 15:43:50 2009 -0400
s/xf86UDelay/usleep/g
cf. https://bugzilla.redhat.com/show_bug.cgi?id=523800
Signed-off-by: Adam Jackson
commit d00a95d0b185ebb753ed9dcbc7b88b4402405972
Author: Gaetan Nadon
Date: Mon Sep 7 11:12:13 2009 -0400
xf86-video-neomagic: Remove unused .cvsignore file #23776
Signed-off-by: Peter Hutterer
commit dcfff9bc194f3d86104e281a14226ff489b199ab
Author: Dave Airlie
Date: Thu Jul 30 12:04:31 2009 +1000
neomagic: bump for release 1.2.4
commit ee5229754f87c8859641926bee82c0141727c7c4
Author: Dave Airlie
Date: Tue Jul 28 15:22:40 2009 +1000
neomagic: change to using ABI version check
commit 44c8d148f8a68c13a65fc989adb09b1a675f1a2a
Author: Dave Airlie
Date: Tue Jul 28 13:32:31 2009 +1000
neomagic: update for resources/RAC API removal
commit e822477ae9cb0f7dd859a49e5da3f30993532ca5
Author: Dave Airlie
Date: Tue Jul 28 10:32:59 2009 +1000
neomagic: remove unneeded include
commit 33997831f0ffe61452fac111b51dabffef348b76
Author: Adam Jackson
Date: Thu Jul 2 11:24:20 2009 -0400
neomagic 1.2.3
commit d97ccdfef1107c7721c838f0cd3fbed5f456dc13
Author: Adam Jackson
Date: Thu May 28 15:07:11 2009 -0400
Remove useless loader symbol lists.
commit 31e1e1e4a789295545d6924031ba6d56078f9afa
Author: Alan Coopersmith
Date: Fri Jan 9 16:31:03 2009 -0800
Remove xorgconfig & xorgcfg from See Also list in man page
commit 9bfdc7232a77472c4a1c13c869f6bc52916ce664
Author: Dave Airlie
Date: Mon Dec 22 14:37:21 2008 +1000
neomagic 1.2.2
commit 4eb1e9385e00e8c2a876b3ef4ef8fdc08f78fcca
Author: Adam Jackson
Date: Sun Nov 23 17:40:37 2008 -0500
Make ISA optional
commit 92f61f85794607ff7d909c5502594a16294ca22e
Author: Adam Jackson
Date: Fri Aug 15 14:06:19 2008 -0400
Uninclude xf86Version.h
commit 4ac0d4db51de095acc6c3be558b993abfd725842
Author: Adam Jackson
Date: Wed May 21 15:50:10 2008 -0400
neomagic 1.2.1
commit 9a2a733e8fc337da838cbd081b22a62f9f97de02
Author: Paulo Cesar Pereira de Andrade
Date: Mon May 12 17:09:50 2008 -0300
Don't include fbpseudocolor.h, as it is no longer available.
commit 38ca3645e9bded8226aba05c0e5fd6f7fc080c1a
Author: Paulo Cesar Pereira de Andrade
Date: Sat Mar 15 21:57:46 2008 -0300
Compile warning fix.
Don't redeclare variable err; cut&paste error that caused warning about
mixed code and declarations.
Minor consistency change to neo_pcirename.h.
commit dc2a372ad7edf34417d7d7042562b601e4f0041c
Author: Adam Jackson
Date: Mon May 12 10:51:43 2008 -0400
fbpseudocolor no longer exists, don't try to use it.
commit 09543c5376f15521820dae14e2e48d3c4a01ba7a
Author: Adam Jackson
Date: Wed Mar 19 14:40:18 2008 -0400
neomagic 1.2.0
commit cd46430570e6de9e4253786c60609bc84c134c32
Author: Adam Jackson
Date: Wed Mar 19 14:36:41 2008 -0400
Death to RCS tags.
commit 0b82e12e40f80d6a4787dc748155d3d05471b272
Author: Dave Airlie
Date: Mon Mar 10 15:22:05 2008 +1000
finish pciaccess conversion
thanks to pcpa again
commit 79c04709e21ff37feea031063939c4e396b0a3ad
Author: Matthieu Herrb
Date: Sat Mar 8 23:40:30 2008 +0100
Makefile.am: nuke RCS Id
commit e9da23854dce210d72c209d971effabf41029853
Author: Dave Airlie
Date: Wed Feb 27 13:27:51 2008 +1000
neo: finish pciaccess conversion
commit e8ee089bc9a46cca015994c95a4e7b2d950c4870
Author: Dave Airlie
Date: Wed Feb 27 11:14:53 2008 +1000
neomagic: port to libpciaccess
commit dc44c5e32c416e94197db3cde29ca3eea3cd01fe
Author: Brice Goglin
Date: Tue Aug 7 12:20:00 2007 +0200
Define NEO_*_VERSION using PACKAGE_VERSION_*
commit 2c84df159e337b43e6664d880fbf04fde7a33d90
Author: Alan Coopersmith
Date: Thu Mar 1 10:51:44 2007 -0800
renamed: .cvsignore -> .gitignore
commit 5bc75e39c8ce1f891ff45128632d6086e4681524
Author: Alan Coopersmith
Date: Thu Mar 1 10:51:24 2007 -0800
Replace references to XFree86/XF86Config in man page
commit 9d8cf9f44a27c7bbf7283872af9bf64b29ba5952
Author: Adam Jackson
Date: Sat Apr 8 01:35:16 2006 +0000
Bump to 1.1.1 for Xv changes.
commit 4998d9b3a430bfd86c8d8054fa361b499d5a8a7a
Author: Aaron Plattner
Date: Fri Apr 7 23:09:50 2006 +0000
Add a DrawablePtr argument to the XV functions to pave the way for
redirected video.
commit a68ca4369e55634c8122e5d14dcec4d9a05b14ad
Author: Adam Jackson
Date: Fri Apr 7 19:24:45 2006 +0000
Unlibcwrap. Bump server version requirement. Bump to 1.1.0.
commit 3e0451e0bafb2c3fd36b758bae713e38ed1d2200
Author: Kevin E Martin
Date: Wed Dec 21 02:30:00 2005 +0000
Update package version for X11R7 release.
commit af44299657fa323d022c96bd5f1c6f3fd671e9d4
Author: Adam Jackson
Date: Mon Dec 19 16:25:53 2005 +0000
Stub COPYING files
commit a6f380ea4151ba53988110ae6d9965a91d17feaa
Author: Kevin E Martin
Date: Thu Dec 15 00:24:18 2005 +0000
Update package version number for final X11R7 release candidate.
commit 67b7d68f8c931232f832cff63ade5917cb46cc19
Author: Kevin E Martin
Date: Tue Dec 6 22:48:35 2005 +0000
Change *man_SOURCES ==> *man_PRE to fix autotools warnings.
commit bffb08ff621a99929fc418ad7a072e4caf23a5f7
Author: Kevin E Martin
Date: Sat Dec 3 05:49:34 2005 +0000
Update package version number for X11R7 RC3 release.
commit 4271514cdfaa36122d22f28d571814e3eb42795b
Author: Kevin E Martin
Date: Fri Dec 2 02:16:09 2005 +0000
Remove extraneous AC_MSG_RESULT.
commit 0e70207585eb2f62eca1510c26190edd64bccf11
Author: Adam Jackson
Date: Tue Nov 29 23:29:59 2005 +0000
Only build dlloader modules by default.
commit b41aae412357d0433a025458c82ca86a34f13289
Author: Alan Coopersmith
Date: Mon Nov 28 22:04:09 2005 +0000
Change *mandir targets to use new *_MAN_DIR variables set by xorg-macros.m4
update to fix bug #5167 (Linux prefers *.1x man pages in man1 subdir)
commit ffe5004cace662157ac46b36dae47d2ef84dced3
Author: Eric Anholt
Date: Mon Nov 21 10:49:15 2005 +0000
Add .cvsignores for drivers.
commit 196a61be797f3bbaef0f7e38399b9dc1ffa9b36d
Author: Kevin E Martin
Date: Tue Nov 15 05:42:03 2005 +0000
Add check for DGA extension to fix issues when building with separate build
roots.
commit dfb50a49f52a6d50dd631f362eeed86e031f64e9
Author: Kevin E Martin
Date: Wed Nov 9 21:15:16 2005 +0000
Update package version number for X11R7 RC2 release.
commit 94a42748c09bd00b2c47cca3cc20a79556c1c302
Author: Kevin E Martin
Date: Tue Nov 1 15:08:53 2005 +0000
Update pkgcheck depedencies to work with separate build roots.
commit 70326ceebecc25bb03427b8c0ff2a7ea18bd7a4e
Author: Kevin E Martin
Date: Wed Oct 19 02:48:03 2005 +0000
Update package version number for RC1 release.
commit ed2c463fc74fd130654420ab451a2ebe147b21e4
Author: Alan Coopersmith
Date: Tue Oct 18 00:01:53 2005 +0000
Use @DRIVER_MAN_SUFFIX@ instead of $(DRIVER_MAN_SUFFIX) in macro
substitutions to work better with BSD make
commit 2fd53a09828beaf0abc0fa0e05777130893cd91d
Author: Adam Jackson
Date: Mon Oct 17 22:57:34 2005 +0000
More 1.7 braindamage: define EXTRA_DIST in terms of @DRIVER_NAME@ instead
of indirectly
commit 779f221a72f911a8554a895aa8e19e83a74e6ded
Author: Alan Coopersmith
Date: Mon Oct 17 00:09:04 2005 +0000
Use sed & cpp to substitute variables in driver man pages
commit 392f13b748742e93dfccd3c4bebb323165eb8eb4
Author: Søren Sandmann Pedersen
Date: Tue Oct 4 21:36:51 2005 +0000
Link nvidida readme file into nvidia driver, Exclude duplicated neomagic
readme
commit a114e9e031bf1250fbb1e03b81927198d376f6e0
Author: Søren Sandmann Pedersen
Date: Tue Sep 27 21:09:35 2005 +0000
Fix capitalization mistake
commit c82ff116e460d5c89cb20a8f94632501b473ad09
Author: Søren Sandmann Pedersen
Date: Tue Sep 27 20:53:19 2005 +0000
Update build system for apm, chips, cirrus, glint, i740, mga, neomagic,
newport to accomodate various new documentation and utility files.
commit dcfb76cc658d410669d9f78e4262ee1c35696272
Author: Daniel Stone
Date: Thu Aug 18 09:03:47 2005 +0000
Update autogen.sh to one that does objdir != srcdir.
commit 688a609b8ffdc4f448ab5fec572e09f81022f8f8
Author: Kevin E Martin
Date: Fri Jul 29 21:22:44 2005 +0000
Various changes preparing packages for RC0:
- Verify and update package version numbers as needed
- Implement versioning scheme
- Change bug address to point to bugzilla bug entry form
- Disable loadable i18n in libX11 by default (use --enable-loadable-i18n to
reenable it)
- Fix makedepend to use pkgconfig and pass distcheck
- Update build script to build macros first
- Update modular Xorg version
commit 8bc434f88799b9690d13bbc01ea24f5090f430aa
Author: Søren Sandmann Pedersen
Date: Tue Jul 26 16:52:44 2005 +0000
Build system for neomagic
commit 2bc76a644f02563d30d17043014e9515a6e0d30b
Author: Adam Jackson
Date: Mon Jul 11 02:29:52 2005 +0000
Prep for modular builds by adding guarded #include "config.h" everywhere.
commit dfdd64a3ddff6103ebe247f3a14e3947dc1bea1c
Author: Adam Jackson
Date: Sat Jun 25 21:16:55 2005 +0000
Bug #3626: _X_EXPORT tags for video and input drivers.
commit 5b044752c61f4b12173208ec788aa6e0e07e6f9a
Author: Daniel Stone
Date: Wed Apr 20 12:25:28 2005 +0000
Fix includes right throughout the Xserver tree:
change "foo.h" to for core headers, e.g. X.h, Xpoll.h;
change "foo.h", "extensions/foo.h" and "X11/foo.h" to
for extension headers, e.g. Xv.h;
change "foo.[ch]" to for Xtrans files.
commit 6c2581bf480c1fc189f0acc77ae6e6bcfbbfbf4e
Author: Egbert Eich
Date: Mon Apr 11 09:50:33 2005 +0000
Fix several mode setting issues:
- eliminates DoubleScan modes above height == 1024.
- eliminates interlaced modes as we don't know how to turn on interlace.
- Fixes clock calculation to prevent lockups.
commit 5f99296eb01ad853cf38c65f26d115767490c81d
Author: Adam Jackson
Date: Fri Feb 25 16:38:34 2005 +0000
Bug #2605: Make the cyrix, dummy, glint, neomagic, tga, and trident drivers
build when BuildXF86DGA NO.
(also fix some datestamps in the changelog)
commit e3f691e2dde1d10a0a0c95875b653984988adde6
Author: Markus Kuhn
Date: Sat Dec 4 00:43:09 2004 +0000
Encoding of numerous files changed to UTF-8
commit 18353e7a97fcc69add74c88f7441c1e36740b23d
Author: Adam Jackson
Date: Mon Aug 16 09:13:14 2004 +0000
Bug #1087: Make sure all the *Weak symbols are documented in the import
list, so the loader knows not to complain about unresolved symbols when
an optional module isn't loaded. This typically manifests as warnings
about fbdevHW symbols when the user isn't using the framebuffer
console.
commit dda5049dd4aa20ba63c52dc301edfaad5ecc1c0d
Author: Adam Jackson
Date: Sat Jul 31 01:21:18 2004 +0000
Change several LoaderSymbol calls introduced by the bug #400 patch to
*Weak() resolver functions.
commit 57cea11892e956f4e6f07005e05d121fa48c3059
Author: Egbert Eich
Date: Fri Jul 30 22:21:32 2004 +0000
Adding experimental pseudocolor overlay stuff to NeoMagic driver.
commit d12adabf2dc323f9e26dd13a9d3a7d3573e9612b
Author: Adam Jackson
Date: Fri Jul 30 20:30:53 2004 +0000
Bug #400 (partial): Driver fixes for the dlloader. When using dlloader, all
framebuffer formats except cfb and the overlay modes should work, and
r128 and radeon need to be loaded from the ati driver (both issues to
be fixed soon). Tested on i740, s3virge, mach64, tdfx, vesa, and vga
drivers. elfloader users shouldn't be affected.
commit 610059a15fd94501b011459cd1557d63fb247c0b
Author: Alex Deucher
Date: Mon Jul 26 23:14:38 2004 +0000
- Add Radeon DynamicClocks option
- Add small fixes and clean ups from ati's last code drop (typo_fixes,
remove_fudge, laptop, xvfix)
- fix possible segfault in mga_dri.c (Ryan Underwood)
- Add Xv support to pre-nm2160 neomagic chipsets
commit 335b5f48e820064b38d3f8a41ac4d9d456dcb8f7
Author: Eric Anholt
Date: Wed Jun 16 09:23:26 2004 +0000
DRI XFree86-4_3_99_12-merge import
commit 774a7a61ea1752af6b5b4b7552468aaf11d0db80
Author: Egbert Eich
Date: Wed May 26 16:24:09 2004 +0000
Fixing setting of physical framebuffer base for several drivers. C&T
driver: Fixed setting of minimal clocks for HiQV chipsets. Neomagic
driver: improved support for lowres double scan modes.
commit b8978749df1558d3dabcc48e38814bba3d06eb3c
Author: Egbert Eich
Date: Fri Apr 23 19:39:11 2004 +0000
Merging XORG-CURRENT into trunk
commit 722d398c9c7a037780215d4da12a8a399998a4ce
Author: Egbert Eich
Date: Sun Mar 14 08:33:26 2004 +0000
Importing vendor version xf86-4_4_99_1 on Sun Mar 14 00:26:39 PST 2004
commit 643dd1ccf54508d5a1c006eb036a783273567510
Author: Egbert Eich
Date: Wed Mar 3 12:12:20 2004 +0000
Importing vendor version xf86-4_4_0 on Wed Mar 3 04:09:24 PST 2004
commit 0af5d7a46ea6d8517e6ae90c4a488e072add1cad
Author: Egbert Eich
Date: Thu Feb 26 13:35:53 2004 +0000
readding XFree86's cvs IDs
commit f20041598ccb0a22dea1677a42a8fd405aa87995
Author: Egbert Eich
Date: Thu Feb 26 09:23:20 2004 +0000
Importing vendor version xf86-4_3_99_903 on Wed Feb 26 01:21:00 PST 2004
commit 07ba4256222964890db244b01b24e0e976fec358
Author: Egbert Eich
Date: Thu Jan 29 08:08:35 2004 +0000
Importing vendor version xf86-012804-2330 on Thu Jan 29 00:06:33 PST 2004
commit 875dcae6c9027502e744f2988f43915e505b1697
Author: Kaleb Keithley
Date: Tue Nov 25 19:28:37 2003 +0000
XFree86 4.3.99.16 Bring the tree up to date for the Cygwin folks
commit 426b55eb490fc5f65af459eaa4b2b9c711710551
Author: Kaleb Keithley
Date: Fri Nov 14 16:48:55 2003 +0000
XFree86 4.3.0.1
commit 3685e43cbed68e378856bbf8135a0b5f5d7ac257
Author: Kaleb Keithley
Date: Fri Nov 14 16:48:55 2003 +0000
Initial revision
xf86-video-neomagic-1.2.9/Makefile.am 0000644 0001750 0001750 00000002447 12216130746 014170 0000000 0000000 # Copyright 2005 Adam Jackson.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# on the rights to use, copy, modify, merge, publish, distribute, sub
# license, and/or sell copies of the Software, and to permit persons to whom
# the Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice (including the next
# paragraph) shall be included in all copies or substantial portions of the
# Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
# ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
# IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
SUBDIRS = src man
MAINTAINERCLEANFILES = ChangeLog INSTALL
EXTRA_DIST = NM-reg.txt
.PHONY: ChangeLog INSTALL
INSTALL:
$(INSTALL_CMD)
ChangeLog:
$(CHANGELOG_CMD)
dist-hook: ChangeLog INSTALL
xf86-video-neomagic-1.2.9/src/ 0000755 0001750 0001750 00000000000 12523103404 012764 5 0000000 0000000 xf86-video-neomagic-1.2.9/src/neo_2070.c 0000644 0001750 0001750 00000020461 12522705002 014305 0000000 0000000 /**********************************************************************
Copyright 1998, 1999 by Precision Insight, Inc., Cedar Park, Texas.
All Rights Reserved
Permission to use, copy, modify, distribute, and sell this software and
its documentation for any purpose is hereby granted without fee,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of Precision Insight not be
used in advertising or publicity pertaining to distribution of the
software without specific, written prior permission. Precision Insight
and its suppliers make no representations about the suitability of this
software for any purpose. It is provided "as is" without express or
implied warranty.
PRECISION INSIGHT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
**********************************************************************/
/*
* The original Precision Insight driver for
* XFree86 v.3.3 has been sponsored by Red Hat.
*
* Authors:
* Jens Owen (jens@tungstengraphics.com)
* Kevin E. Martin (kevin@precisioninsight.com)
*
* Port to Xfree86 v.4.0
* 1998, 1999 by Egbert Eich (Egbert.Eich@Physik.TU-Darmstadt.DE)
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "xf86.h"
#include "xf86_OSproc.h"
#include "compiler.h"
/* Drivers that use XAA need this */
#include "xf86fbman.h"
#include "miline.h"
#include "neo.h"
#include "neo_reg.h"
#include "neo_macros.h"
#ifdef HAVE_XAA_H
/* Memory Mapped I/O for BitBlt */
#define NEO2070_BLTSTAT 0x00
#define NEO2070_BLTCNTL 0x04
#define NEO2070_XPCOLOR 0x08
#define NEO2070_FGCOLOR 0x0c
#define NEO2070_BGCOLOR 0x10
#define NEO2070_PLANEMASK 0x14
#define NEO2070_XYEXT 0x18
#define NEO2070_SRCPITCH 0x1c
#define NEO2070_SRCBITOFF 0x20
#define NEO2070_SRCSTART 0x24
#define NEO2070_DSTPITCH 0x28
#define NEO2070_DSTBITOFF 0x2c
#define NEO2070_DSTSTART 0x30
static unsigned int neo2070Rop[16] = {
0x000000, /* 0x0000 - GXclear */
0x080000, /* 0x1000 - GXand */
0x040000, /* 0x0100 - GXandReverse */
0x0c0000, /* 0x1100 - GXcopy */
0x020000, /* 0x0010 - GXandInvert */
0x0a0000, /* 0x1010 - GXnoop */
0x060000, /* 0x0110 - GXxor */
0x0e0000, /* 0x1110 - GXor */
0x010000, /* 0x0001 - GXnor */
0x090000, /* 0x1001 - GXequiv */
0x050000, /* 0x0101 - GXinvert */
0x0d0000, /* 0x1101 - GXorReverse */
0x030000, /* 0x0011 - GXcopyInvert */
0x0b0000, /* 0x1011 - GXorInverted */
0x070000, /* 0x0111 - GXnand */
0x0f0000 /* 0x1111 - GXset */
};
static void Neo2070Sync(ScrnInfoPtr pScrn);
static void Neo2070SetupForScreenToScreenCopy(ScrnInfoPtr pScrn, int xdir,
int ydir, int rop,
unsigned int planemask,
int trans_color);
static void Neo2070SubsequentScreenToScreenCopy(ScrnInfoPtr pScrn, int srcX,
int srcY, int dstX, int dstY,
int w, int h);
static void Neo2070SetupForSolidFillRect(ScrnInfoPtr pScrn, int color, int rop,
unsigned int planemask);
static void Neo2070SubsequentSolidFillRect(ScrnInfoPtr pScrn, int x, int y,
int w, int h);
#endif
Bool
Neo2070AccelInit(ScreenPtr pScreen)
{
#ifdef HAVE_XAA_H
XAAInfoRecPtr infoPtr;
ScrnInfoPtr pScrn = xf86ScreenToScrn(pScreen);
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
nPtr->AccelInfoRec = infoPtr = XAACreateInfoRec();
if(!infoPtr) return FALSE;
/*
* Set up the main acceleration flags.
*/
infoPtr->Flags = LINEAR_FRAMEBUFFER | OFFSCREEN_PIXMAPS;
if(nAcl->cacheEnd > nAcl->cacheStart) infoPtr->Flags |= PIXMAP_CACHE;
#if 0
infoPtr->PixmapCacheFlags |= DO_NOT_BLIT_STIPPLES;
#endif
/* sync */
infoPtr->Sync = Neo2070Sync;
/* screen to screen copy */
infoPtr->ScreenToScreenCopyFlags = (NO_TRANSPARENCY | GXCOPY_ONLY);
infoPtr->SetupForScreenToScreenCopy =
Neo2070SetupForScreenToScreenCopy;
infoPtr->SubsequentScreenToScreenCopy =
Neo2070SubsequentScreenToScreenCopy;
/* solid filled rectangles */
infoPtr->SolidFillFlags = GXCOPY_ONLY;
infoPtr->SetupForSolidFill =
Neo2070SetupForSolidFillRect;
infoPtr->SubsequentSolidFillRect =
Neo2070SubsequentSolidFillRect;
/*
* Setup some global variables
*/
/* Initialize for 8bpp or 15/16bpp support accellerated */
switch (pScrn->bitsPerPixel) {
case 8:
nAcl->BltCntlFlags = NEO_BC1_DEPTH8;
nAcl->ColorShiftAmt = 8;
nAcl->PixelWidth = 1;
nAcl->PlaneMask = 0xff;
break;
case 15:
case 16:
nAcl->BltCntlFlags = NEO_BC1_DEPTH16;
nAcl->ColorShiftAmt = 0;
nAcl->PixelWidth = 2;
nAcl->PlaneMask = 0xffff;
break;
case 24: /* not supported, but check anyway */
default:
return FALSE;
}
return(XAAInit(pScreen, infoPtr));
#else
return FALSE;
#endif
}
#ifdef HAVE_XAA_H
static void
Neo2070Sync(ScrnInfoPtr pScrn)
{
NEOPtr nPtr = NEOPTR(pScrn);
WAIT_ENGINE_IDLE();
}
static void
Neo2070SetupForScreenToScreenCopy(ScrnInfoPtr pScrn, int xdir, int ydir,
int rop,
unsigned int planemask,
int trans_color)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
/* set blt control */
WAIT_ENGINE_IDLE();
OUTREG(NEO2070_BLTCNTL, nAcl->tmpBltCntlFlags);
OUTREG(NEO2070_PLANEMASK, planemask |= (planemask << nAcl->ColorShiftAmt));
OUTREG(NEO2070_SRCPITCH, nAcl->Pitch);
OUTREG(NEO2070_DSTPITCH, nAcl->Pitch);
OUTREG(NEO2070_SRCBITOFF, 0);
OUTREG(NEO2070_DSTBITOFF, 0);
}
static void
Neo2070SubsequentScreenToScreenCopy(ScrnInfoPtr pScrn,
int srcX, int srcY,
int dstX, int dstY,
int w, int h)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
if ((dstY < srcY) || ((dstY == srcY) && (dstX < srcX))) {
/* start with upper left corner */
WAIT_ENGINE_IDLE();
OUTREG(NEO2070_BLTCNTL, nAcl->tmpBltCntlFlags);
OUTREG(NEO2070_XYEXT, ((h-1)<<16) | ((w-1) & 0xffff));
OUTREG(NEO2070_SRCSTART,
(srcY * nAcl->Pitch) + (srcX * nAcl->PixelWidth));
OUTREG(NEO2070_DSTSTART,
(dstY * nAcl->Pitch) + (dstX * nAcl->PixelWidth));
}
else {
/* start with lower right corner */
WAIT_ENGINE_IDLE();
OUTREG(NEO2070_BLTCNTL, (nAcl->tmpBltCntlFlags | NEO_BC0_X_DEC
| NEO_BC0_DST_Y_DEC
| NEO_BC0_SRC_Y_DEC));
OUTREG(NEO2070_XYEXT, ((h-1)<<16) | ((w-1) & 0xffff));
OUTREG(NEO2070_SRCSTART,
((srcY+h-1) * nAcl->Pitch) + ((srcX+w-1) * nAcl->PixelWidth));
OUTREG(NEO2070_DSTSTART,
((dstY+h-1) * nAcl->Pitch) + ((dstX+w-1) * nAcl->PixelWidth));
}
}
static void
Neo2070SetupForSolidFillRect(ScrnInfoPtr pScrn, int color, int rop,
unsigned int planemask)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
planemask &= nAcl->PlaneMask;
if (!rop) color=0;
WAIT_ENGINE_IDLE();
OUTREG(NEO2070_BLTCNTL, nAcl->BltCntlFlags |
NEO_BC0_SRC_IS_FG | neo2070Rop[3]);
OUTREG(NEO2070_PLANEMASK, planemask |= (planemask << nAcl->ColorShiftAmt));
if (pScrn->bitsPerPixel == 8)
OUTREG(NEO2070_FGCOLOR, color |= (color << 8));
else
/* swap bytes in color */
OUTREG(NEO2070_FGCOLOR, ((color&0xff00) >> 8) | (color << 8));
OUTREG(NEO2070_SRCPITCH, nAcl->Pitch);
OUTREG(NEO2070_DSTPITCH, nAcl->Pitch);
OUTREG(NEO2070_SRCBITOFF, 0);
OUTREG(NEO2070_DSTBITOFF, 0);
}
static void
Neo2070SubsequentSolidFillRect(ScrnInfoPtr pScrn, int x, int y, int w, int h)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
WAIT_ENGINE_IDLE();
OUTREG(NEO2070_XYEXT, ((h-1)<<16) | ((w-1) & 0xffff));
OUTREG(NEO2070_DSTSTART, (y * nAcl->Pitch) + (x * nAcl->PixelWidth));
}
#endif
xf86-video-neomagic-1.2.9/src/neo_2097.c 0000644 0001750 0001750 00000040714 12522705002 014321 0000000 0000000 /**********************************************************************
Copyright 1998, 1999 by Precision Insight, Inc., Cedar Park, Texas.
All Rights Reserved
Permission to use, copy, modify, distribute, and sell this software and
its documentation for any purpose is hereby granted without fee,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of Precision Insight not be
used in advertising or publicity pertaining to distribution of the
software without specific, written prior permission. Precision Insight
and its suppliers make no representations about the suitability of this
software for any purpose. It is provided "as is" without express or
implied warranty.
PRECISION INSIGHT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
**********************************************************************/
/*
* The original Precision Insight driver for
* XFree86 v.3.3 has been sponsored by Red Hat.
*
* Authors:
* Jens Owen (jens@tungstengraphics.com)
* Kevin E. Martin (kevin@precisioninsight.com)
*
* Port to Xfree86 v.4.0
* 1998, 1999 by Egbert Eich (Egbert.Eich@Physik.TU-Darmstadt.DE)
*/
/*
* This module supports acceleration for 2097 and 2160.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "xf86.h"
#include "xf86_OSproc.h"
#include "compiler.h"
/* Drivers that use XAA need this */
#include "xf86fbman.h"
#include "miline.h"
#include "neo.h"
#include "neo_reg.h"
#include "neo_macros.h"
#ifdef HAVE_XAA_H
static void Neo2097Sync(ScrnInfoPtr pScrn);
static void Neo2097SetupForScreenToScreenCopy(ScrnInfoPtr pScrn, int xdir,
int ydir, int rop,
unsigned int planemask,
int trans_color);
static void Neo2097SubsequentScreenToScreenCopy(ScrnInfoPtr pScrn, int srcX,
int srcY, int dstX, int dstY,
int w, int h);
static void Neo2097SetupForSolidFillRect(ScrnInfoPtr pScrn, int color, int rop,
unsigned int planemask);
static void Neo2097SubsequentSolidFillRect(ScrnInfoPtr pScrn, int x, int y,
int w, int h);
static void Neo2097SetupScanlineForCPUToScreenColorExpandFill(
ScrnInfoPtr pScrn,
int fg, int bg,
int rop,
unsigned int planemask);
static void Neo2097SubsequentScanlineCPUToScreenColorExpandFill(
ScrnInfoPtr pScrn,
int x, int y,
int w, int h,
int skipleft);
static void Neo2097SubsequentColorExpandScanline(ScrnInfoPtr pScrn, int bufno);
#if 0
static void Neo2097SetupForMono8x8PatternFill(ScrnInfoPtr pScrn,
int patternx,
int patterny,
int fg, int bg,
int rop, unsigned int planemask);
static void Neo2097SubsequentMono8x8PatternFill(ScrnInfoPtr pScrn,
int patternx,
int patterny,
int x, int y,
int w, int h);
#endif
static void Neo2097SetupForScanlineImageWrite(ScrnInfoPtr pScrn, int rop,
unsigned int planemask,
int transparency_color, int bpp, int depth);
static void Neo2097SubsequentScanlineImageWriteRect(ScrnInfoPtr pScrn,
int x, int y, int w, int h, int skipleft);
static void Neo2097SubsequentImageWriteScanline(ScrnInfoPtr pScrn, int num);
static unsigned int neo2097Rop[16] = {
0x000000, /* 0x0000 - GXclear */
0x080000, /* 0x1000 - GXand */
0x040000, /* 0x0100 - GXandReverse */
0x0c0000, /* 0x1100 - GXcopy */
0x020000, /* 0x0010 - GXandInvert */
0x0a0000, /* 0x1010 - GXnoop */
0x060000, /* 0x0110 - GXxor */
0x0e0000, /* 0x1110 - GXor */
0x010000, /* 0x0001 - GXnor */
0x090000, /* 0x1001 - GXequiv */
0x050000, /* 0x0101 - GXinvert */
0x0d0000, /* 0x1101 - GXorReverse */
0x030000, /* 0x0011 - GXcopyInvert */
0x0b0000, /* 0x1011 - GXorInverted */
0x070000, /* 0x0111 - GXnand */
0x0f0000 /* 0x1111 - GXset */
};
#endif
Bool
Neo2097AccelInit(ScreenPtr pScreen)
{
#ifdef HAVE_XAA_H
XAAInfoRecPtr infoPtr;
ScrnInfoPtr pScrn = xf86ScreenToScrn(pScreen);
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
nPtr->AccelInfoRec = infoPtr = XAACreateInfoRec();
if(!infoPtr) return FALSE;
/*
* Set up the main acceleration flags.
*/
infoPtr->Flags = LINEAR_FRAMEBUFFER | OFFSCREEN_PIXMAPS;
if(nAcl->cacheEnd > nAcl->cacheStart) infoPtr->Flags |= PIXMAP_CACHE;
infoPtr->PixmapCacheFlags = DO_NOT_BLIT_STIPPLES;
/* sync */
infoPtr->Sync = Neo2097Sync;
/* screen to screen copy */
infoPtr->ScreenToScreenCopyFlags = (NO_TRANSPARENCY | NO_PLANEMASK);
infoPtr->SetupForScreenToScreenCopy =
Neo2097SetupForScreenToScreenCopy;
infoPtr->SubsequentScreenToScreenCopy =
Neo2097SubsequentScreenToScreenCopy;
/* solid filled rectangles */
infoPtr->SolidFillFlags = NO_PLANEMASK;
infoPtr->SetupForSolidFill =
Neo2097SetupForSolidFillRect;
infoPtr->SubsequentSolidFillRect =
Neo2097SubsequentSolidFillRect;
if (!nPtr->strangeLockups) {
/* cpu to screen color expansion */
/*
* We do CPUToScreenColorExpand (ab)using the Scanline functions:
* the neo chipsets need byte padding however we can only do dword
* padding. Fortunately the graphics engine doesn't choke if we
* transfer up to 3 bytes more than it wants.
*/
infoPtr->ScanlineColorExpandBuffers =
(unsigned char **)xnfalloc(sizeof(char*));
infoPtr->ScanlineColorExpandBuffers[0] = (unsigned char *)(nPtr->NeoMMIOBase + 0x100000);
infoPtr->NumScanlineColorExpandBuffers = 1;
infoPtr->ScanlineCPUToScreenColorExpandFillFlags = ( NO_PLANEMASK |
#ifdef NEO_DO_CLIPPING
LEFT_EDGE_CLIPPING |
#endif
CPU_TRANSFER_PAD_DWORD |
BIT_ORDER_IN_BYTE_MSBFIRST );
infoPtr->SetupForScanlineCPUToScreenColorExpandFill =
Neo2097SetupScanlineForCPUToScreenColorExpandFill;
infoPtr->SubsequentScanlineCPUToScreenColorExpandFill =
Neo2097SubsequentScanlineCPUToScreenColorExpandFill;
infoPtr->SubsequentColorExpandScanline =
Neo2097SubsequentColorExpandScanline;
}
#if 0
/* 8x8 pattern fills */
infoPtr->Mono8x8PatternFillFlags = NO_PLANEMASK
| HARDWARE_PATTERN_PROGRAMMED_ORIGIN
| BIT_ORDER_IN_BYTE_MSBFIRST;
infoPtr->SetupForMono8x8PatternFill =
Neo2097SetupForMono8x8PatternFill;
infoPtr->SubsequentMono8x8PatternFillRect =
Neo2097SubsequentMono8x8PatternFill;
#endif
if (!nPtr->strangeLockups) {
/* image writes */
infoPtr->ScanlineImageWriteFlags = ( CPU_TRANSFER_PAD_DWORD |
SCANLINE_PAD_DWORD |
NO_TRANSPARENCY |
NO_PLANEMASK );
infoPtr->SetupForScanlineImageWrite =
Neo2097SetupForScanlineImageWrite;
infoPtr->SubsequentScanlineImageWriteRect =
Neo2097SubsequentScanlineImageWriteRect;
infoPtr->SubsequentImageWriteScanline =
Neo2097SubsequentImageWriteScanline;
infoPtr->NumScanlineImageWriteBuffers = 1;
infoPtr->ScanlineImageWriteBuffers =
infoPtr->ScanlineColorExpandBuffers;
}
/*
* Setup some global variables
*/
nAcl->ColorShiftAmt = 0;
/* Initialize for 8bpp or 15/16bpp support accellerated */
switch (pScrn->bitsPerPixel) {
case 8:
nAcl->BltCntlFlags = NEO_BC1_DEPTH8;
nAcl->ColorShiftAmt = 8;
break;
case 15:
case 16:
nAcl->BltCntlFlags = NEO_BC1_DEPTH16;
nAcl->ColorShiftAmt = 0;
break;
case 24:
default:
return FALSE;
}
/* Initialize for widths */
switch (pScrn->displayWidth) {
case 640:
nAcl->BltCntlFlags |= NEO_BC1_X_640;
break;
case 800:
nAcl->BltCntlFlags |= NEO_BC1_X_800;
break;
case 1024:
nAcl->BltCntlFlags |= NEO_BC1_X_1024;
break;
default:
return FALSE;
}
return(XAAInit(pScreen, infoPtr));
#else
return FALSE;
#endif
}
#ifdef HAVE_XAA_H
static void
Neo2097Sync(ScrnInfoPtr pScrn)
{
NEOPtr nPtr = NEOPTR(pScrn);
WAIT_ENGINE_IDLE();
}
static void
Neo2097SetupForScreenToScreenCopy(ScrnInfoPtr pScrn, int xdir, int ydir,
int rop,
unsigned int planemask,
int trans_color)
{
NEOACLPtr nAcl = NEOACLPTR(pScrn);
nAcl->tmpBltCntlFlags = (nAcl->BltCntlFlags |
NEO_BC3_SKIP_MAPPING |
NEO_BC3_DST_XY_ADDR |
NEO_BC3_SRC_XY_ADDR | neo2097Rop[rop]);
}
static void
Neo2097SubsequentScreenToScreenCopy(ScrnInfoPtr pScrn,
int srcX, int srcY,
int dstX, int dstY,
int w, int h)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
if ((dstY < srcY) || ((dstY == srcY) && (dstX < srcX))) {
/* start with upper left corner */
WAIT_ENGINE_IDLE();
OUTREG(NEOREG_BLTCNTL, nAcl->tmpBltCntlFlags);
OUTREG(NEOREG_SRCSTARTOFF, (srcY<<16) | (srcX & 0xffff));
OUTREG(NEOREG_DSTSTARTOFF, (dstY<<16) | (dstX & 0xffff));
OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff));
}
else {
/* start with lower right corner */
WAIT_ENGINE_IDLE();
OUTREG(NEOREG_BLTCNTL, (nAcl->tmpBltCntlFlags | NEO_BC0_X_DEC
| NEO_BC0_DST_Y_DEC
| NEO_BC0_SRC_Y_DEC));
OUTREG(NEOREG_SRCSTARTOFF, ((srcY+h-1)<<16) | ((srcX+w-1) & 0xffff));
OUTREG(NEOREG_DSTSTARTOFF, ((dstY+h-1)<<16) | ((dstX+w-1) & 0xffff));
OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff));
}
}
static void
Neo2097SetupForSolidFillRect(ScrnInfoPtr pScrn, int color, int rop,
unsigned int planemask)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
WAIT_ENGINE_IDLE();
/* set blt control */
OUTREG(NEOREG_BLTCNTL, nAcl->BltCntlFlags |
NEO_BC0_SRC_IS_FG |
NEO_BC3_SKIP_MAPPING |
NEO_BC3_DST_XY_ADDR |
NEO_BC3_SRC_XY_ADDR | neo2097Rop[rop]);
/* set foreground color */
OUTREG(NEOREG_FGCOLOR, color |= (color << nAcl->ColorShiftAmt));
}
static void
Neo2097SubsequentSolidFillRect(ScrnInfoPtr pScrn, int x, int y, int w, int h)
{
NEOPtr nPtr = NEOPTR(pScrn);
WAIT_ENGINE_IDLE();
OUTREG(NEOREG_DSTSTARTOFF, (y<<16) | (x & 0xffff));
OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff));
}
static void
Neo2097SetupScanlineForCPUToScreenColorExpandFill(ScrnInfoPtr pScrn,
int fg, int bg,
int rop,
unsigned int planemask)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
if (bg == -1) {
/* transparent setup */
WAIT_ENGINE_IDLE();
#ifdef NEO_DO_CLIPPING
OUTREG(NEOREG_BLTCNTL, nAcl->BltCntlFlags |
NEO_BC0_SYS_TO_VID |
NEO_BC0_SRC_MONO |
NEO_BC0_SRC_TRANS |
NEO_BC3_SKIP_MAPPING |
NEO_BC3_CLIP_ON |
NEO_BC3_DST_XY_ADDR | neo2097Rop[rop]);
#else
OUTREG(NEOREG_BLTCNTL, nAcl->BltCntlFlags |
NEO_BC0_SYS_TO_VID |
NEO_BC0_SRC_MONO |
NEO_BC0_SRC_TRANS |
NEO_BC3_SKIP_MAPPING |
NEO_BC3_DST_XY_ADDR | neo2097Rop[rop]);
#endif
OUTREG(NEOREG_FGCOLOR, fg |= (fg << nAcl->ColorShiftAmt));
}
else {
/* opaque setup */
WAIT_ENGINE_IDLE();
#ifdef NEO_DO_CLIPPING
OUTREG(NEOREG_BLTCNTL, nAcl->BltCntlFlags |
NEO_BC0_SYS_TO_VID |
NEO_BC0_SRC_MONO |
NEO_BC3_SKIP_MAPPING |
NEO_BC3_CLIP_ON |
NEO_BC3_DST_XY_ADDR | neo2097Rop[rop]);
#else
OUTREG(NEOREG_BLTCNTL, nAcl->BltCntlFlags |
NEO_BC0_SYS_TO_VID |
NEO_BC0_SRC_MONO |
NEO_BC3_SKIP_MAPPING |
NEO_BC3_DST_XY_ADDR | neo2097Rop[rop]);
#endif
OUTREG(NEOREG_FGCOLOR, fg |= (fg << nAcl->ColorShiftAmt));
OUTREG(NEOREG_BGCOLOR, bg |= (bg << nAcl->ColorShiftAmt));
}
}
static void
Neo2097SubsequentScanlineCPUToScreenColorExpandFill(ScrnInfoPtr pScrn,
int x, int y,
int w, int h,
int skipleft)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
#ifdef NEO_DO_CLIPPING
w = (w + 31) & ~31;
#else
nAcl->CPUToScreenColorExpandFill_x = x;
nAcl->CPUToScreenColorExpandFill_y = y;
nAcl->CPUToScreenColorExpandFill_w = w;
nAcl->CPUToScreenColorExpandFill_h = h;
#endif
WAIT_ENGINE_IDLE();
#ifdef NEO_DO_CLIPPING
OUTREG(NEOREG_CLIPLT, (y << 16) | (x + skipleft));
OUTREG(NEOREG_CLIPRB, ((y + h) << 16) | (x + w));
WAIT_ENGINE_IDLE();
#endif
OUTREG(NEOREG_SRCSTARTOFF, 0);
OUTREG(NEOREG_DSTSTARTOFF, (y<<16) | (x & 0xffff));
#ifdef NEO_DO_CLIPPING
OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff));
#else
OUTREG(NEOREG_XYEXT, (1<<16) | (w & 0xffff));
#endif
}
static void
Neo2097SubsequentColorExpandScanline(ScrnInfoPtr pScrn, int bufno)
{
#ifdef NEO_DO_CLIPPING
/* Should I be waiting for fifo slots to prevent retries ?
How do I do that on this engine ? */
#else
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
if (!(--nAcl->CPUToScreenColorExpandFill_h))
return;
WAIT_ENGINE_IDLE();
OUTREG(NEOREG_SRCSTARTOFF, 0);
OUTREG(NEOREG_DSTSTARTOFF, ((++nAcl->CPUToScreenColorExpandFill_y)<<16)
| (nAcl->CPUToScreenColorExpandFill_x & 0xffff));
OUTREG(NEOREG_XYEXT, (1<<16)
| (nAcl->CPUToScreenColorExpandFill_w & 0xffff));
#endif
}
#if 0
static void
Neo2097SetupForMono8x8PatternFill(ScrnInfoPtr pScrn,
int patternx,
int patterny,
int fg, int bg,
int rop, unsigned int planemask)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
if (bg == -1) {
/* transparent setup */
nAcl->tmpBltCntlFlags = ( nAcl->BltCntlFlags |
NEO_BC0_SRC_MONO |
NEO_BC0_FILL_PAT |
NEO_BC0_SRC_TRANS |
NEO_BC3_SKIP_MAPPING |
NEO_BC3_SRC_XY_ADDR |
NEO_BC3_DST_XY_ADDR | neo2097Rop[rop]);
WAIT_ENGINE_IDLE();
OUTREG(NEOREG_FGCOLOR, fg |= (fg << nAcl->ColorShiftAmt));
OUTREG(NEOREG_SRCSTARTOFF, (patterny << 16) | patternx);
}
else {
/* opaque setup */
nAcl->tmpBltCntlFlags = ( nAcl->BltCntlFlags |
NEO_BC0_SRC_MONO |
NEO_BC0_FILL_PAT |
NEO_BC3_SKIP_MAPPING |
NEO_BC3_SRC_XY_ADDR |
NEO_BC3_DST_XY_ADDR | neo2097Rop[rop]);
WAIT_ENGINE_IDLE();
OUTREG(NEOREG_FGCOLOR, fg |= (fg << nAcl->ColorShiftAmt));
OUTREG(NEOREG_BGCOLOR, bg |= (bg << nAcl->ColorShiftAmt));
OUTREG(NEOREG_SRCSTARTOFF, (patterny << 16) | patternx);
}
}
static void
Neo2097SubsequentMono8x8PatternFill(ScrnInfoPtr pScrn,
int patternx,
int patterny,
int x, int y,
int w, int h)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
patterny &= 0x7;
WAIT_ENGINE_IDLE();
OUTREG(NEOREG_BLTCNTL, nAcl->tmpBltCntlFlags | (patterny << 20));
/* OUTREG(NEOREG_SRCBITOFF, patternx); Bad Register */
OUTREG(NEOREG_DSTSTARTOFF, (y<<16) | (x & 0xffff));
OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff));
}
#endif
static void
Neo2097SetupForScanlineImageWrite(
ScrnInfoPtr pScrn,
int rop,
unsigned int planemask,
int transparency_color,
int bpp, int depth
){
NEOACLPtr nAcl = NEOACLPTR(pScrn);
nAcl->tmpBltCntlFlags = (nAcl->BltCntlFlags |
NEO_BC0_SYS_TO_VID |
NEO_BC3_SKIP_MAPPING |
NEO_BC3_DST_XY_ADDR | neo2097Rop[rop]);
}
static void
Neo2097SubsequentScanlineImageWriteRect(
ScrnInfoPtr pScrn,
int x, int y, int w, int h,
int skipleft
){
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
WAIT_ENGINE_IDLE();
OUTREG(NEOREG_BLTCNTL, nAcl->tmpBltCntlFlags);
OUTREG(NEOREG_SRCSTARTOFF, 0);
OUTREG(NEOREG_DSTSTARTOFF, (y << 16) | (x & 0xffff));
OUTREG(NEOREG_XYEXT, (h << 16) | w);
}
static void
Neo2097SubsequentImageWriteScanline(
ScrnInfoPtr pScrn,
int bufno
){
/* should I be checking for fifo slots here ? */
}
#endif
xf86-video-neomagic-1.2.9/src/neo_dga.c 0000644 0001750 0001750 00000016361 12522705002 014454 0000000 0000000 /*
* Copyright 2000 by Alan Hourihane, Sychdyn, North Wales, UK.
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that
* copyright notice and this permission notice appear in supporting
* documentation, and that the name of Alan Hourihane not be used in
* advertising or publicity pertaining to distribution of the software without
* specific, written prior permission. Alan Hourihane makes no representations
* about the suitability of this software for any purpose. It is provided
* "as is" without express or implied warranty.
*
* ALAN HOURIHANE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL ALAN HOURIHANE BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
*
* Authors: Alan Hourihane,
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "xf86.h"
#include "xf86_OSproc.h"
#include "xf86Pci.h"
#include "neo.h"
#include "neo_reg.h"
#include "dgaproc.h"
#include "vgaHW.h"
static Bool NEO_OpenFramebuffer(ScrnInfoPtr, char **, unsigned char **,
int *, int *, int *);
static Bool NEO_SetMode(ScrnInfoPtr, DGAModePtr);
static int NEO_GetViewport(ScrnInfoPtr);
static void NEO_SetViewport(ScrnInfoPtr, int, int, int);
#ifdef HAVE_XAA_H
static void NEO_Sync(ScrnInfoPtr);
static void NEO_FillRect(ScrnInfoPtr, int, int, int, int, unsigned long);
static void NEO_BlitRect(ScrnInfoPtr, int, int, int, int, int, int);
#if 0
static void NEO_BlitTransRect(ScrnInfoPtr, int, int, int, int, int, int,
unsigned long);
#endif
#endif
static
DGAFunctionRec NEODGAFuncs = {
NEO_OpenFramebuffer,
NULL,
NEO_SetMode,
NEO_SetViewport,
NEO_GetViewport,
#ifdef HAVE_XAA_H
NEO_Sync,
NEO_FillRect,
NEO_BlitRect,
#if 0
NEO_BlitTransRect
#else
NULL
#endif
#else
NULL, NULL, NULL
#endif
};
Bool
NEODGAInit(ScreenPtr pScreen)
{
ScrnInfoPtr pScrn = xf86ScreenToScrn(pScreen);
NEOPtr pNEO = NEOPTR(pScrn);
DGAModePtr modes = NULL, newmodes = NULL, currentMode;
DisplayModePtr pMode, firstMode;
int Bpp = pScrn->bitsPerPixel >> 3;
int num = 0, imlines, pixlines;
imlines = (pScrn->videoRam * 1024) /
(pScrn->displayWidth * (pScrn->bitsPerPixel >> 3));
pixlines = (imlines > 1024 && !pNEO->noAccel) ? 1024 : imlines;
pMode = firstMode = pScrn->modes;
while(pMode) {
newmodes = realloc(modes, (num + 1) * sizeof(DGAModeRec));
if(!newmodes) {
free(modes);
return FALSE;
}
modes = newmodes;
currentMode = modes + num;
num++;
currentMode->mode = pMode;
currentMode->flags = DGA_CONCURRENT_ACCESS | DGA_PIXMAP_AVAILABLE;
#ifdef HAVE_XAA_H
if (!pNEO->noAccel)
currentMode->flags |= (DGA_FILL_RECT | DGA_BLIT_RECT);
#endif
if(pMode->Flags & V_DBLSCAN)
currentMode->flags |= DGA_DOUBLESCAN;
if(pMode->Flags & V_INTERLACE)
currentMode->flags |= DGA_INTERLACED;
currentMode->byteOrder = pScrn->imageByteOrder;
currentMode->depth = pScrn->depth;
currentMode->bitsPerPixel = pScrn->bitsPerPixel;
currentMode->red_mask = pScrn->mask.red;
currentMode->green_mask = pScrn->mask.green;
currentMode->blue_mask = pScrn->mask.blue;
currentMode->visualClass = (Bpp == 1) ? PseudoColor : TrueColor;
currentMode->viewportWidth = pMode->HDisplay;
currentMode->viewportHeight = pMode->VDisplay;
currentMode->xViewportStep = 1;
currentMode->yViewportStep = 1;
currentMode->viewportFlags = DGA_FLIP_RETRACE;
currentMode->offset = 0;
currentMode->address = pNEO->NeoFbBase;
currentMode->bytesPerScanline =
((pScrn->displayWidth * Bpp) + 3) & ~3L;
currentMode->imageWidth = pScrn->displayWidth;
currentMode->imageHeight = imlines;
currentMode->pixmapWidth = currentMode->imageWidth;
currentMode->pixmapHeight = pixlines;
currentMode->maxViewportX = currentMode->imageWidth -
currentMode->viewportWidth;
currentMode->maxViewportY = currentMode->imageHeight -
currentMode->viewportHeight;
pMode = pMode->next;
if(pMode == firstMode)
break;
}
pNEO->numDGAModes = num;
pNEO->DGAModes = modes;
return DGAInit(pScreen, &NEODGAFuncs, modes, num);
}
static DisplayModePtr NEOSavedDGAModes[MAXSCREENS];
static Bool
NEO_SetMode(
ScrnInfoPtr pScrn,
DGAModePtr pMode
){
int index = pScrn->pScreen->myNum;
NEOPtr pNEO = NEOPTR(pScrn);
if(!pMode) { /* restore the original mode */
if(pNEO->DGAactive) {
pScrn->currentMode = NEOSavedDGAModes[index];
NEOSwitchMode(SWITCH_MODE_ARGS(pScrn, pScrn->currentMode));
NEOAdjustFrame(ADJUST_FRAME_ARGS(pScrn, 0, 0));
pNEO->DGAactive = FALSE;
}
} else {
if(!pNEO->DGAactive) { /* save the old parameters */
NEOSavedDGAModes[index] = pScrn->currentMode;
pNEO->DGAactive = TRUE;
}
NEOSwitchMode(SWITCH_MODE_ARGS(pScrn, pMode->mode));
}
return TRUE;
}
static int
NEO_GetViewport(
ScrnInfoPtr pScrn
){
NEOPtr pNEO = NEOPTR(pScrn);
return pNEO->DGAViewportStatus;
}
static void
NEO_SetViewport(
ScrnInfoPtr pScrn,
int x, int y,
int flags
){
NEOPtr pNEO = NEOPTR(pScrn);
vgaHWPtr hwp = VGAHWPTR(pScrn);
NEOAdjustFrame(ADJUST_FRAME_ARGS(pScrn, x, y));
/* wait for retrace */
while((hwp->readST01(hwp) & 0x08));
while(!(hwp->readST01(hwp) & 0x08));
pNEO->DGAViewportStatus = 0;
}
#ifdef HAVE_XAA_H
static void
NEO_FillRect (
ScrnInfoPtr pScrn,
int x, int y, int w, int h,
unsigned long color
){
NEOPtr pNEO = NEOPTR(pScrn);
if(pNEO->AccelInfoRec) {
(*pNEO->AccelInfoRec->SetupForSolidFill)(pScrn, color, GXcopy, ~0);
(*pNEO->AccelInfoRec->SubsequentSolidFillRect)(pScrn, x, y, w, h);
SET_SYNC_FLAG(pNEO->AccelInfoRec);
}
}
static void
NEO_Sync(
ScrnInfoPtr pScrn
){
NEOPtr pNEO = NEOPTR(pScrn);
if(pNEO->AccelInfoRec) {
(*pNEO->AccelInfoRec->Sync)(pScrn);
}
}
static void
NEO_BlitRect(
ScrnInfoPtr pScrn,
int srcx, int srcy,
int w, int h,
int dstx, int dsty
){
NEOPtr pNEO = NEOPTR(pScrn);
if(pNEO->AccelInfoRec) {
int xdir = ((srcx < dstx) && (srcy == dsty)) ? -1 : 1;
int ydir = (srcy < dsty) ? -1 : 1;
(*pNEO->AccelInfoRec->SetupForScreenToScreenCopy)(
pScrn, xdir, ydir, GXcopy, ~0, -1);
(*pNEO->AccelInfoRec->SubsequentScreenToScreenCopy)(
pScrn, srcx, srcy, dstx, dsty, w, h);
SET_SYNC_FLAG(pNEO->AccelInfoRec);
}
}
#if 0
static void
NEO_BlitTransRect(
ScrnInfoPtr pScrn,
int srcx, int srcy,
int w, int h,
int dstx, int dsty,
unsigned long color
){
/* this one should be separate since the XAA function would
prohibit usage of ~0 as the key */
}
#endif
#endif
static Bool
NEO_OpenFramebuffer(
ScrnInfoPtr pScrn,
char **name,
unsigned char **mem,
int *size,
int *offset,
int *flags
){
NEOPtr pNEO = NEOPTR(pScrn);
*name = NULL; /* no special device */
*mem = (unsigned char*)pNEO->NeoLinearAddr;
*size = pNEO->NeoFbMapSize;
*offset = 0;
*flags = DGA_NEED_ROOT;
return TRUE;
}
xf86-video-neomagic-1.2.9/src/neo_macros.h 0000644 0001750 0001750 00000005254 12216130746 015220 0000000 0000000 /**********************************************************************
Copyright 1998, 1999 by Precision Insight, Inc., Cedar Park, Texas.
All Rights Reserved
Permission to use, copy, modify, distribute, and sell this software and
its documentation for any purpose is hereby granted without fee,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of Precision Insight not be
used in advertising or publicity pertaining to distribution of the
software without specific, written prior permission. Precision Insight
and its suppliers make no representations about the suitability of this
software for any purpose. It is provided "as is" without express or
implied warranty.
PRECISION INSIGHT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
**********************************************************************/
/*
* The original Precision Insight driver for
* XFree86 v.3.3 has been sponsored by Red Hat.
*
* Authors:
* Jens Owen (jens@tungstengraphics.com)
* Kevin E. Martin (kevin@precisioninsight.com)
*
* Port to Xfree86 v.4.0
* 1998, 1999 by Egbert Eich (Egbert.Eich@Physik.TU-Darmstadt.DE)
*/
#define WAIT_FB_FIFO_EMPTY() { \
while( INREG(NEOREG_BLTSTAT) & NEO_BS0_FIFO_PEND); \
}
#define WAIT_BLT_DONE() { \
while( INREG(NEOREG_BLTSTAT) & NEO_BS0_BLT_BUSY); \
}
#define WAIT_ENGINE_IDLE() { \
WAIT_BLT_DONE(); \
}
#ifdef NOT_DONE
#define WAIT_FIFO(n) { \
while( NeoFifoCount < (n)) { \
NeoFifoCount = (INREG(NEOREG_BLTSTAT) >> 8); \
} \
NeoFifoCount -= (n); \
}
#else
#define WAIT_FIFO(n) { \
WAIT_ENGINE_IDLE(); \
}
#endif
xf86-video-neomagic-1.2.9/src/Makefile.am 0000644 0001750 0001750 00000003651 12522705002 014746 0000000 0000000 # Copyright 2005 Adam Jackson.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# on the rights to use, copy, modify, merge, publish, distribute, sub
# license, and/or sell copies of the Software, and to permit persons to whom
# the Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice (including the next
# paragraph) shall be included in all copies or substantial portions of the
# Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
# ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
# IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
# this is obnoxious:
# -module lets us name the module exactly how we want
# -avoid-version prevents gratuitous .0.0.0 version numbers on the end
# _ladir passes a dummy rpath to libtool so the thing will actually link
# TODO: -nostdlib/-Bstatic/-lgcc platform magic, not installing the .a, etc.
AM_CFLAGS = @XORG_CFLAGS@
neomagic_drv_la_LTLIBRARIES = neomagic_drv.la
neomagic_drv_la_LDFLAGS = -module -avoid-version
neomagic_drv_ladir = @moduledir@/drivers
neomagic_drv_la_SOURCES = \
neo_2070.c \
neo_2090.c \
neo_2097.c \
neo_2200.c \
neo_cursor.c \
neo_dga.c \
neo_driver.c \
neo.h \
neo_i2c.c \
neo_macros.h \
neo_reg.h \
neo_shadow.c \
neo_video.c \
neo_video.h \
neo_pcirename.h \
compat-api.h
xf86-video-neomagic-1.2.9/src/neo_video.h 0000644 0001750 0001750 00000005071 12216130746 015037 0000000 0000000 /**********************************************************************
Copyright 2002 by Shigehiro Nomura.
All Rights Reserved
Permission to use, copy, modify, distribute, and sell this software and
its documentation for any purpose is hereby granted without fee,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of Shigehiro Nomura not be
used in advertising or publicity pertaining to distribution of the
software without specific, written prior permission. Shigehiro Nomura
and its suppliers make no representations about the suitability of this
software for any purpose. It is provided "as is" without express or
implied warranty.
SHIGEHIRO NOMURA DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
EVENT SHALL SHIGEHIRO NOMURA AND/OR ITS SUPPLIERS BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
**********************************************************************/
#ifndef _NEO_VIDEO_H
#define _NEO_VIDEO_H
#define ACC_MMIO
#include "vgaHW.h"
#include "fourcc.h"
#include
#define NEO_VIDEO_VIDEO 0
#define NEO_VIDEO_IMAGE 1
#define FOURCC_RV15 0x35315652
#define FOURCC_RV16 0x36315652
#define OFF_DELAY 200 /* milliseconds */
#define FREE_DELAY 60000 /* milliseconds */
#define OFF_TIMER 0x01
#define FREE_TIMER 0x02
#define CLIENT_VIDEO_ON 0x04
#define TIMER_MASK (OFF_TIMER | FREE_TIMER)
typedef struct
{
FBLinearPtr linear;
RegionRec clip;
CARD32 colorKey;
CARD32 interlace;
CARD32 brightness;
CARD32 videoStatus;
Time offTime;
Time freeTime;
} NEOPortRec, *NEOPortPtr;
typedef struct
{
FBLinearPtr linear;
Bool isOn;
} NEOOffscreenRec, *NEOOffscreenPtr;
/* I/O Functions */
# define OUTGR(idx,dat) \
if (nPtr->NeoMMIOBase2) \
(*(unsigned short *)(nPtr->NeoMMIOBase2+VGA_GRAPH_INDEX)\
=(idx)|((dat)<<8));\
else \
VGAwGR((idx),(dat));
# define OUTSR(idx,dat) \
if (nPtr->NeoMMIOBase2) \
(*(unsigned short *)(nPtr->NeoMMIOBase2+VGA_SEQ_INDEX)=(idx)|((dat)<<8));\
else \
VGAwSR((idx),(dat));
# define VGA_HWP(x) vgaHWPtr hwp = VGAHWPTR(x)
#endif /* _NEO_VIDEO_H */
xf86-video-neomagic-1.2.9/src/neo_video.c 0000644 0001750 0001750 00000072524 12522705002 015032 0000000 0000000 /**********************************************************************
Copyright 2002 by Shigehiro Nomura.
All Rights Reserved
Permission to use, copy, modify, distribute, and sell this software and
its documentation for any purpose is hereby granted without fee,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of Shigehiro Nomura not be
used in advertising or publicity pertaining to distribution of the
software without specific, written prior permission. Shigehiro Nomura
and its suppliers make no representations about the suitability of this
software for any purpose. It is provided "as is" without express or
implied warranty.
SHIGEHIRO NOMURA DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
EVENT SHALL SHIGEHIRO NOMURA AND/OR ITS SUPPLIERS BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
**********************************************************************/
/*
* Copyright 2002 SuSE Linux AG, Author: Egbert Eich
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "neo.h"
#include "neo_video.h"
#define nElems(x) (sizeof(x) / sizeof(x[0]))
#define MAKE_ATOM(a) MakeAtom(a, sizeof(a) - 1, TRUE)
#include "dixstruct.h"
static XF86VideoAdaptorPtr NEOSetupVideo(ScreenPtr);
static int NEOPutVideo(ScrnInfoPtr, short, short, short, short,
short, short, short, short, RegionPtr, pointer,
DrawablePtr);
static void NEOStopVideo(ScrnInfoPtr, pointer, Bool);
static int NEOSetPortAttribute(ScrnInfoPtr, Atom, INT32, pointer);
static int NEOGetPortAttribute(ScrnInfoPtr, Atom, INT32 *, pointer);
static void NEOQueryBestSize(ScrnInfoPtr, Bool, short, short, short,
short, unsigned int *, unsigned int *, pointer);
static int NEOPutImage(ScrnInfoPtr, short, short, short, short, short, short,
short, short, int, unsigned char *, short, short, Bool,
RegionPtr, pointer, DrawablePtr);
static int NEOQueryImageAttributes(ScrnInfoPtr, int, unsigned short *,
unsigned short *, int *, int *);
static void NEODisplayVideo(ScrnInfoPtr, int, int, short, short, int, int,
int, int, int, BoxPtr, short, short, short, short);
static void NEOInitOffscreenImages(ScreenPtr);
static FBLinearPtr NEOAllocateMemory(ScrnInfoPtr, FBLinearPtr, int);
static int NEOAllocSurface(ScrnInfoPtr, int, unsigned short, unsigned short,
XF86SurfacePtr);
static int NEOFreeSurface(XF86SurfacePtr);
static int NEODisplaySurface(XF86SurfacePtr, short, short, short, short,
short, short, short, short, RegionPtr clipBoxes);
static int NEOStopSurface(XF86SurfacePtr);
static int NEOGetSurfaceAttribute(ScrnInfoPtr, Atom, INT32 *);
static int NEOSetSurfaceAttribute(ScrnInfoPtr, Atom, INT32);
static Atom xvColorKey, xvBrightness, xvInterlace;
void
NEOInitVideo(ScreenPtr pScreen)
{
ScrnInfoPtr pScrn = xf86ScreenToScrn(pScreen);
NEOPtr nPtr = NEOPTR(pScrn);
XF86VideoAdaptorPtr *overlayAdaptors, *newAdaptors = NULL;
XF86VideoAdaptorPtr newAdaptor = NULL;
int numAdaptors;
numAdaptors = xf86XVListGenericAdaptors(pScrn, &overlayAdaptors);
if (nPtr->NeoChipset > NM2070
&& nPtr->NeoMMIOBase2 != NULL){
nPtr->video = TRUE;
newAdaptor = NEOSetupVideo(pScreen);
NEOInitOffscreenImages(pScreen);
} else
nPtr->video = FALSE;
if (newAdaptor){
if (!numAdaptors){
numAdaptors = 1;
overlayAdaptors = &newAdaptor;
} else {
newAdaptors = malloc((numAdaptors + 1)
* sizeof(XF86VideoAdaptorPtr*));
if (newAdaptors){
memcpy(newAdaptors, overlayAdaptors,
numAdaptors * sizeof(XF86VideoAdaptorPtr));
newAdaptors[numAdaptors++] = newAdaptor;
overlayAdaptors = newAdaptors;
}
}
}
if (numAdaptors)
xf86XVScreenInit(pScreen, overlayAdaptors, numAdaptors);
if (newAdaptors)
free(newAdaptors);
}
static XF86VideoEncodingRec NEOVideoEncodings[] =
{
{
NEO_VIDEO_VIDEO,
"XV_VIDEO",
1024, 1024,
{1, 1}
},
{
NEO_VIDEO_IMAGE,
"XV_IMAGE",
1024, 1024,
{1, 1}
}
};
static XF86VideoFormatRec NEOVideoFormats[] =
{
{ 8, PseudoColor },
{ 15, TrueColor },
{ 16, TrueColor },
{ 24, TrueColor },
};
static XF86AttributeRec NEOVideoAttributes[] =
{
{
XvSettable | XvGettable,
0x000000, 0xFFFFFF,
"XV_COLORKEY"
},
{
XvSettable | XvGettable,
-128, 127,
"XV_BRIGHTNESS"
},
{
XvSettable | XvGettable,
0,2,
"XV_INTERLACE"
},
};
static XF86ImageRec NEOVideoImages[] =
{
XVIMAGE_YUY2,
XVIMAGE_YV12,
XVIMAGE_I420,
{
FOURCC_RV15,
XvRGB,
LSBFirst,
{ 'R', 'V' ,'1', '5',
0x00,'5',0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
16,
XvPacked,
1,
15, 0x001F, 0x03E0, 0x7C00,
0, 0, 0,
0, 0, 0,
0, 0, 0,
{ 'R', 'V', 'B' },
XvTopToBottom
},
{
FOURCC_RV16,
XvRGB,
LSBFirst,
{ 'R', 'V' ,'1', '6',
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 },
16,
XvPacked,
1,
16, 0xF800, 0x07E0, 0x001F,
0, 0, 0,
0, 0, 0,
0, 0, 0,
{ 'R', 'V', 'B' },
XvTopToBottom
}
};
static XF86VideoAdaptorPtr
NEOSetupVideo(ScreenPtr pScreen)
{
ScrnInfoPtr pScrn = xf86ScreenToScrn(pScreen);
NEOPtr nPtr = NEOPTR(pScrn);
NEOPortPtr pPriv;
XF86VideoAdaptorPtr overlayAdaptor;
int i;
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"NEOSetupVideo\n");
#endif
if ((overlayAdaptor = calloc(1, sizeof(XF86VideoAdaptorRec) +
sizeof(DevUnion) +
sizeof(NEOPortRec))) == NULL){
return (NULL);
}
overlayAdaptor->type = XvInputMask | XvImageMask | XvWindowMask
| XvOutputMask | XvVideoMask;
overlayAdaptor->flags = VIDEO_OVERLAID_IMAGES | VIDEO_CLIP_TO_VIEWPORT;
overlayAdaptor->name = "NeoMagic Video Engine";
overlayAdaptor->nEncodings = nElems(NEOVideoEncodings);
overlayAdaptor->pEncodings = NEOVideoEncodings;
for (i = 0; i < nElems(NEOVideoEncodings); i++){
NEOVideoEncodings[i].width = 1024;
NEOVideoEncodings[i].height = 1024;
}
overlayAdaptor->nFormats = nElems(NEOVideoFormats);
overlayAdaptor->pFormats = NEOVideoFormats;
overlayAdaptor->nPorts = 1;
overlayAdaptor->pPortPrivates = (DevUnion*) &overlayAdaptor[1];
overlayAdaptor->pPortPrivates[0].ptr =
(pointer) &overlayAdaptor->pPortPrivates[1];
overlayAdaptor->nAttributes = nElems(NEOVideoAttributes);
overlayAdaptor->pAttributes = NEOVideoAttributes;
overlayAdaptor->nImages = nElems(NEOVideoImages);
overlayAdaptor->pImages = NEOVideoImages;
overlayAdaptor->PutVideo = NEOPutVideo;
overlayAdaptor->PutStill = NULL;
overlayAdaptor->GetVideo = NULL;
overlayAdaptor->GetStill = NULL;
overlayAdaptor->StopVideo = NEOStopVideo;
overlayAdaptor->SetPortAttribute = NEOSetPortAttribute;
overlayAdaptor->GetPortAttribute = NEOGetPortAttribute;
overlayAdaptor->QueryBestSize = NEOQueryBestSize;
overlayAdaptor->PutImage = NEOPutImage;
overlayAdaptor->QueryImageAttributes = NEOQueryImageAttributes;
pPriv = (NEOPortPtr)overlayAdaptor->pPortPrivates[0].ptr;
pPriv->colorKey = nPtr->videoKey;
pPriv->interlace = nPtr->interlace;
pPriv->videoStatus = 0;
pPriv->brightness = 0;
REGION_NULL(pScreen, &pPriv->clip);
nPtr->overlayAdaptor = overlayAdaptor;
xvBrightness = MAKE_ATOM("XV_BRIGHTNESS");
xvColorKey = MAKE_ATOM("XV_COLORKEY");
xvInterlace = MAKE_ATOM("XV_INTERLACE");
NEOResetVideo(pScrn);
return (overlayAdaptor);
}
void
NEOResetVideo(ScrnInfoPtr pScrn)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOPortPtr pPriv = (NEOPortPtr)nPtr->overlayAdaptor->pPortPrivates[0].ptr;
int r, g, b;
VGA_HWP(pScrn);
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"NEOResetVideo\n");
#endif
switch (pScrn->depth){
case 8:
OUTGR(0xc6, pPriv->colorKey & 0);
OUTGR(0xc5, pPriv->colorKey & 0xff);
OUTGR(0xc7, pPriv->colorKey & 0);
break;
default:
r = (pPriv->colorKey & pScrn->mask.red) >> pScrn->offset.red;
g = (pPriv->colorKey & pScrn->mask.green) >> pScrn->offset.green;
b = (pPriv->colorKey & pScrn->mask.blue) >> pScrn->offset.blue;
OUTGR(0xc5, r);
OUTGR(0xc6, g);
OUTGR(0xc7, b);
break;
}
OUTGR(0xc4, pPriv->brightness);
}
static int
NEOPutVideo(ScrnInfoPtr pScrn,
short src_x, short src_y, short drw_x, short drw_y,
short src_w, short src_h, short drw_w, short drw_h,
RegionPtr clipBoxes, pointer data, DrawablePtr pDraw)
{
NEOPortPtr pPriv = (NEOPortPtr)data;
NEOPtr nPtr = NEOPTR(pScrn);
CARD32 src_pitch, offset;
int xscale, yscale;
BoxRec dstBox;
INT32 x1, y1, x2, y2;
int size, bpp;
unsigned char capctrl;
VGA_HWP(pScrn);
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"NEOPutVideo: src: %d %d %d %d\n",
src_x, src_y, src_w, src_h);
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"NEOPutVideo: drw: %d %d %d %d\n",
drw_x, drw_y, drw_w, drw_h);
#endif
if (src_w > 720)
src_w = 720;
if (src_h > 576)
src_h = 576;
if (pPriv->interlace != 2)
src_h /= 2;
x1 = src_x;
y1 = src_y;
x2 = src_x + src_w;
y2 = src_y + src_h;
dstBox.x1 = drw_x;
dstBox.y1 = drw_y;
dstBox.x2 = drw_x + drw_w;
dstBox.y2 = drw_y + drw_h;
if (!xf86XVClipVideoHelper(&dstBox, &x1, &x2, &y1, &y2,
clipBoxes, src_w, src_h)){
return(Success);
}
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"NEOPutVideo: %d %d %d %d\n",
x1, y1, x2, y2);
#endif
dstBox.x1 -= pScrn->frameX0;
dstBox.y1 -= pScrn->frameY0;
dstBox.x2 -= pScrn->frameX0;
dstBox.y2 -= pScrn->frameY0;
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"NEOPutVideo: dstBox %d %d %d %d\n",
dstBox.x1, dstBox.y1, dstBox.x2, dstBox.y2);
#endif
bpp = (pScrn->bitsPerPixel + 1) >> 3;
src_pitch = (src_w + 7) & ~7;
xscale = 0x1000;
if (src_w <= drw_w){
xscale = (src_w * 0x1000 / drw_w) & 0xffff;
}
yscale = 0x1000;
if (src_h <= drw_h){
yscale = (src_h * 0x1000 / drw_h) & 0xffff;
}
size = src_h * src_pitch * 2;
if (size > nPtr->overlay){
if ((pPriv->linear = NEOAllocateMemory(pScrn, pPriv->linear, size))
== NULL){
return (BadAlloc);
}
} else {
pPriv->linear = NULL;
}
if (pPriv->linear == NULL){
offset = nPtr->overlay_offset;
} else {
offset = pPriv->linear->offset * bpp;
}
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"NEOPutVideo: offset=0x%x\n", offset);
#endif
WAIT_ENGINE_IDLE();
memset(nPtr->NeoFbBase + offset, 0, size);
if (!REGION_EQUAL(pScrn->pScreen, &pPriv->clip, clipBoxes)){
REGION_COPY(pScrn->pScreen, &pPriv->clip, clipBoxes);
xf86XVFillKeyHelper(pScrn->pScreen, pPriv->colorKey, clipBoxes);
}
x1 >>= 16;
y1 >>= 16;
x2 >>= 16;
y2 >>= 16;
switch (nPtr->NeoChipset) {
default:
case NM2090:
case NM2093:
case NM2097:
case NM2160:
offset/=2;
OUTGR(0xbc, 0x4f);
break;
case NM2200:
case NM2230:
case NM2360:
case NM2380:
OUTGR(0xbc, 0x2e);
break;
}
OUTGR(0xb1, (((dstBox.x2-1) >> 4) & 0xf0) | ((dstBox.x1 >> 8) & 0x0f));
OUTGR(0xb2, dstBox.x1);
OUTGR(0xb3, dstBox.x2 - 1);
OUTGR(0xb4, (((dstBox.y2 - 1) >> 4) & 0xf0) | ((dstBox.y1 >> 8) & 0x0f));
OUTGR(0xb5, dstBox.y1);
OUTGR(0xb6, dstBox.y2 - 1);
OUTGR(0xb7, offset >> 16);
OUTGR(0xb8, offset >> 8);
OUTGR(0xb9, offset );
OUTGR(0xba, src_pitch >> 8);
OUTGR(0xbb, src_pitch);
OUTGR(0xc0, xscale >> 8);
OUTGR(0xc1, xscale);
OUTGR(0xc2, yscale >> 8);
OUTGR(0xc3, yscale);
OUTGR(0xbf, 0x02);
OUTGR(0x0a, 0x21);
OUTSR(0x0c, offset );
OUTSR(0x0d, offset >> 8);
OUTSR(0x0e, offset >> 16);
OUTSR(0x1a, src_pitch);
OUTSR(0x1b, src_pitch>>8);
OUTSR(0x17, 0 + x1);
OUTSR(0x18, 0 + x2 -1);
OUTSR(0x19, (((0 + x2 - 1) >> 4) & 0xf0) | (((0 + x1) >> 8) & 0x0f));
OUTSR(0x14, 14 + y1);
OUTSR(0x15, 14 + y2 - 2);
OUTSR(0x16, (((14 + y2 - 1) >> 4) & 0xf0) | (((14 + y1) >> 8) & 0x0f));
OUTSR(0x1c, 0xfb);
OUTSR(0x1d, 0x00);
OUTSR(0x1e, 0xe2);
OUTSR(0x1f, 0x02);
OUTSR(0x09, 0x11);
OUTSR(0x0a, 0x00);
capctrl = 0x21;
switch (pPriv->interlace){
case 0: /* Combine 2 fields */
break;
case 1: /* one field only */
capctrl |= 0x80;
break;
case 2: /* Interlaced fields */
capctrl |= 0x40;
break;
}
OUTSR(0x08, capctrl);
#if 0
OUTGR(0x0a, 0x01);
#endif
OUTGR(0xb0, 0x03);
pPriv->videoStatus = CLIENT_VIDEO_ON;
return (Success);
}
static void
NEOStopVideo(ScrnInfoPtr pScrn, pointer data, Bool exit)
{
NEOPortPtr pPriv = (NEOPortPtr)data;
NEOPtr nPtr = NEOPTR(pScrn);
VGA_HWP(pScrn);
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"NEOStopVideo\n");
#endif
REGION_EMPTY(pScrn->pScreen, &pPriv->clip);
if (exit){
if (pPriv->videoStatus & CLIENT_VIDEO_ON){
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"NEOStopVideo: stop capture\n");
#endif
OUTGR(0xb0, 0x02);
OUTGR(0x0a, 0x21);
OUTSR(0x08, 0xa0);
#if 0
OUTGR(0x0a, 0x01);
#endif
}
if (pPriv->linear != NULL){
xf86FreeOffscreenLinear(pPriv->linear);
pPriv->linear = NULL;
}
pPriv->videoStatus = 0;
} else {
if (pPriv->videoStatus & CLIENT_VIDEO_ON){
OUTGR(0xb0, 0x02);
OUTGR(0x0a, 0x21);
OUTSR(0x08, 0xa0);
#if 0
OUTGR(0x0a, 0x01);
#endif
pPriv->videoStatus |= OFF_TIMER;
pPriv->offTime = currentTime.milliseconds + OFF_DELAY;
}
}
}
static int
NEOSetPortAttribute(ScrnInfoPtr pScrn, Atom attribute, INT32 value,
pointer data)
{
NEOPortPtr pPriv = (NEOPortPtr)data;
NEOPtr nPtr = NEOPTR(pScrn);
VGA_HWP(pScrn);
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"NEOSetPortAttribute\n");
#endif
if (attribute == xvColorKey){
int r, g, b;
pPriv->colorKey = value;
switch (pScrn->depth){
case 8:
OUTGR(0xc6, pPriv->colorKey & 0xff);
OUTGR(0xc5, 0x00);
OUTGR(0xc7, 0x00);
break;
default:
r = (pPriv->colorKey & pScrn->mask.red) >> pScrn->offset.red;
g = (pPriv->colorKey & pScrn->mask.green) >> pScrn->offset.green;
b = (pPriv->colorKey & pScrn->mask.blue) >> pScrn->offset.blue;
OUTGR(0xc5, r);
OUTGR(0xc6, g);
OUTGR(0xc7, b);
}
} else if (attribute == xvBrightness){
if ((value < -128) || (value > 127)){
return (BadValue);
}
pPriv->brightness = value;
OUTGR(0xc4, value);
} else if (attribute == xvInterlace){
if (value < 0 || value > 2){
return (BadValue);
}
pPriv->interlace = value;
} else {
return (BadMatch);
}
return (Success);
}
static int
NEOGetPortAttribute(ScrnInfoPtr pScrn, Atom attribute, INT32 *value,
pointer data)
{
NEOPortPtr pPriv = (NEOPortPtr)data;
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"NEOGetPortAttribute\n");
#endif
if (attribute == xvColorKey){
*value = pPriv->colorKey;
} else if (attribute == xvBrightness){
*value = pPriv->brightness;
} else if (attribute == xvInterlace){
*value = pPriv->interlace;
} else {
return (BadMatch);
}
return (Success);
}
static void
NEOQueryBestSize(ScrnInfoPtr pScrn, Bool motion,
short vid_w, short vid_h, short drw_w, short drw_h,
unsigned int *p_w, unsigned int *p_h,
pointer data)
{
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"NEOQueryBestSize\n");
#endif
*p_w = min(drw_w, 1024);
*p_h = min(drw_h, 1024);
}
static int
NEOPutImage(ScrnInfoPtr pScrn,
short src_x, short src_y, short drw_x, short drw_y,
short src_w, short src_h, short drw_w, short drw_h,
int id, unsigned char *buf, short width, short height,
Bool sync, RegionPtr clipBoxes, pointer data,
DrawablePtr pDraw)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOPortPtr pPriv = (NEOPortPtr)nPtr->overlayAdaptor->pPortPrivates[0].ptr;
INT32 x1, y1, x2, y2;
int bpp;
int srcPitch, srcPitch2 = 0, dstPitch, size;
BoxRec dstBox;
CARD32 offset, offset2 = 0, offset3 = 0, tmp;
int left, top, nPixels, nLines;
unsigned char *dstStart;
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"NEOPutImage\n");
#endif
x1 = src_x;
y1 = src_y;
x2 = src_x + src_w;
y2 = src_y + src_h;
dstBox.x1 = drw_x;
dstBox.y1 = drw_y;
dstBox.x2 = drw_x + drw_w;
dstBox.y2 = drw_y + drw_h;
if (!xf86XVClipVideoHelper(&dstBox, &x1, &x2, &y1, &y2,
clipBoxes, width, height)){
return (Success);
}
dstBox.x1 -= pScrn->frameX0;
dstBox.y1 -= pScrn->frameY0;
dstBox.x2 -= pScrn->frameX0;
dstBox.y2 -= pScrn->frameY0;
bpp = ((pScrn->bitsPerPixel + 1) >> 3);
switch (id){
case FOURCC_YV12:
srcPitch = (width + 3) & ~3;
offset2 = srcPitch * height;
srcPitch2 = ((width >> 1) + 3) & ~3;
offset3 = offset2 + (srcPitch2 * (height >> 1));
dstPitch = ((width << 1) + 15) & ~15;
break;
case FOURCC_I420:
srcPitch = (width + 3) & ~3;
offset3 = srcPitch * height;
srcPitch2 = ((width >> 1) + 3) & ~3;
offset2 = offset3 + (srcPitch2 * (height >> 1));
dstPitch = ((width << 1) + 15) & ~15;
break;
case FOURCC_YUY2:
case FOURCC_RV15:
case FOURCC_RV16:
default:
srcPitch = width << 1;
dstPitch = (srcPitch + 15) & ~15;
break;
}
size = dstPitch * height;
if (size > nPtr->overlay){
if ((pPriv->linear = NEOAllocateMemory(pScrn, pPriv->linear, size))
== NULL){
return (BadAlloc);
}
} else {
pPriv->linear = NULL;
}
top = y1 >> 16;
left = (x1 >> 16) & ~1;
nPixels = ((((x2 + 0xFFFF) >> 16) + 1) & ~1) - left;
left <<= 1;
if (pPriv->linear == NULL){
offset = nPtr->overlay_offset;
} else {
offset = pPriv->linear->offset * bpp;
}
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"offset=%x\n", offset);
#endif
dstStart = (unsigned char *)(nPtr->NeoFbBase + offset + left);
switch (id){
case FOURCC_YV12:
case FOURCC_I420:
top &= ~1;
tmp = ((top >> 1) * srcPitch2) + (left >> 2);
offset2 += tmp;
offset3 += tmp;
nLines = ((((y2 + 0xFFFF) >> 16) + 1) & ~1) - top;
xf86XVCopyYUV12ToPacked(buf + (top * srcPitch) + (left >> 1),
buf + offset2, buf + offset3,
dstStart, srcPitch, srcPitch2,
dstPitch, nLines, nPixels);
break;
default:
buf += (top * srcPitch) + left;
nLines = ((y2 + 0xFFFF) >> 16) - top;
xf86XVCopyPacked(buf, dstStart, srcPitch, dstPitch,
nLines, nPixels << 1);
}
if (!REGION_EQUAL(pScrn->pScreen, &pPriv->clip, clipBoxes)){
REGION_COPY(pScrn->pScreen, &pPriv->clip, clipBoxes);
xf86XVFillKeyHelper(pScrn->pScreen, pPriv->colorKey, clipBoxes);
}
NEODisplayVideo(pScrn, id, offset, width, height, dstPitch, x1, y1,
x2, y2, &dstBox, src_w, src_h, drw_w, drw_h);
pPriv->videoStatus = CLIENT_VIDEO_ON;
return (Success);
}
static int
NEOQueryImageAttributes(ScrnInfoPtr pScrn, int id,
unsigned short *width, unsigned short *height,
int *pitches, int *offsets)
{
int size, tmp;
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"NEOQueryImageAttributes\n");
#endif
if (*width > 1024){
*width = 1024;
}
if (*height > 1024){
*height = 1024;
}
*width = (*width + 1) & ~1;
if (offsets != NULL){
offsets[0] = 0;
}
switch (id){
case FOURCC_YV12:
case FOURCC_I420:
*height = (*height + 1) & ~1;
size = (*width + 3) & ~3;
if (pitches != NULL){
pitches[0] = size;
}
size *= *height;
if (offsets != NULL){
offsets[1] = size;
}
tmp = ((*width >> 1) + 3) & ~3;
if (pitches != NULL){
pitches[1] = pitches[2] = tmp;
}
tmp *= (*height >> 1);
size += tmp;
if (offsets != NULL){
offsets[2] = size;
}
size += tmp;
break;
case FOURCC_YUY2:
case FOURCC_RV15:
case FOURCC_RV16:
default:
size = *width * 2;
if (pitches != NULL){
pitches[0] = size;
}
size *= *height;
break;
}
return (size);
}
static void
NEODisplayVideo(ScrnInfoPtr pScrn, int id, int offset,
short width, short height, int pitch,
int x1, int y1, int x2, int y2, BoxPtr dstBox,
short src_w, short src_h, short drw_w, short drw_h)
{
NEOPtr nPtr = NEOPTR(pScrn);
int hstretch, vstretch, fmt;
VGA_HWP(pScrn);
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"NEODisplayVideo\n");
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"NEODisplayVideo src_w=%d, src_h=%d, pitch=%d, drw_w=%d, drw_h=%d\n", src_w, src_h, pitch, drw_w, drw_h);
#endif
#define WIDTH_THRESHOLD 160
if (dstBox->x2 >= pScrn->virtualX) {
/*
* This is a hack to work around a problem when video is moved
* accross the right border.
*/
int diff_s = (width - ((x2 - x1) >> 16)) & ~1;
int diff_d = (drw_w - dstBox->x2 + dstBox->x1) & ~1;
offset -= 2 * ((diff_s > diff_d) ? diff_d : diff_s);
dstBox->x1 -= diff_d;
} else if (dstBox->x2 - dstBox->x1 < WIDTH_THRESHOLD) {
/*
* When the video window is less than about 160 pixel wide
* it will be distoreted. We attempt to fix it by actually
* making it wider and relying on the color key to prevent
* it from appearing outside of the video.
*/
int pre, post;
int scale = 1;
if (dstBox->x1 < WIDTH_THRESHOLD) {
pre = dstBox->x1;
post = 160 - pre;
} else {
pre = 160;
post = 0;
}
offset -= 2 * scale * pre;
dstBox->x1 -= pre;
dstBox->x2 += post;
}
if (nPtr->videoHZoom != 1.0) {
if ((dstBox->x2 += 5) > pScrn->virtualX)
dstBox->x2 = pScrn->virtualX;
if (dstBox->x1 > 0) dstBox->x1 += 2;
}
fmt = 0x00;
switch (id){
case FOURCC_YV12:
case FOURCC_I420:
case FOURCC_YUY2:
fmt = 0x00;
break;
case FOURCC_RV15:
case FOURCC_RV16:
fmt = 0x20;
break;
}
offset += (x1 >> 15) & ~0x03;
switch (nPtr->NeoChipset) {
default:
case NM2090:
case NM2093:
case NM2097:
case NM2160:
offset/=2;
pitch/=2;
OUTGR(0xbc, 0x4f);
break;
case NM2200:
case NM2230:
case NM2360:
case NM2380:
OUTGR(0xbc, 0x2e);
break;
}
/* factor 4 for granularity */
hstretch = (double)0x1000 * 4 / (int)(nPtr->videoHZoom * 4);
if (drw_w > src_w)
hstretch = (((int)src_w) * hstretch) / (int) drw_w;
vstretch = (double)0x1000 / nPtr->videoVZoom;
if (drw_h > src_h)
vstretch = (((int)src_h) * vstretch )/ (int) drw_h;
OUTGR(0xb1, (((dstBox->x2 - 1) >> 4) & 0xf0) | ((dstBox->x1 >> 8) & 0x0f));
OUTGR(0xb2, dstBox->x1);
OUTGR(0xb3, dstBox->x2 - 1);
OUTGR(0xb4, (((dstBox->y2 - 1) >> 4) & 0xf0) | ((dstBox->y1 >> 8) & 0x0f));
OUTGR(0xb5, dstBox->y1);
OUTGR(0xb6, dstBox->y2 - 1);
OUTGR(0xb7, offset >> 16);
OUTGR(0xb8, offset >> 8);
OUTGR(0xb9, offset );
OUTGR(0xba, pitch >> 8);
OUTGR(0xbb, pitch);
OUTGR(0xbd, 0x02);
OUTGR(0xbe, 0x00);
OUTGR(0xbf, 0x02);
OUTGR(0xc0, hstretch >> 8);
OUTGR(0xc1, hstretch);
OUTGR(0xc2, vstretch >> 8);
OUTGR(0xc3, vstretch);
OUTGR(0xb0, fmt | 0x03);
OUTGR(0x0a, 0x21);
OUTSR(0x08, 0xa0);
OUTGR(0x0a, 0x01);
}
static void
NEOInitOffscreenImages(ScreenPtr pScreen)
{
XF86OffscreenImagePtr offscreenImages;
#ifdef DEBUG
xf86DrvMsg(xf86ScreenToScrn(pScreen)->scrnIndex,X_INFO,"NEOInitOffscreenImages\n");
#endif
if ((offscreenImages = malloc(sizeof(XF86OffscreenImageRec))) == NULL){
return;
}
offscreenImages->image = NEOVideoImages;
offscreenImages->flags = VIDEO_OVERLAID_IMAGES | VIDEO_CLIP_TO_VIEWPORT;
offscreenImages->alloc_surface = NEOAllocSurface;
offscreenImages->free_surface = NEOFreeSurface;
offscreenImages->display = NEODisplaySurface;
offscreenImages->stop = NEOStopSurface;
offscreenImages->getAttribute = NEOGetSurfaceAttribute;
offscreenImages->setAttribute = NEOSetSurfaceAttribute;
offscreenImages->max_width = 1024;
offscreenImages->max_height = 1024;
offscreenImages->num_attributes = nElems(NEOVideoAttributes);
offscreenImages->attributes = NEOVideoAttributes;
xf86XVRegisterOffscreenImages(pScreen, offscreenImages, 1);
}
static FBLinearPtr
NEOAllocateMemory(ScrnInfoPtr pScrn, FBLinearPtr linear, int size)
{
ScreenPtr pScreen;
FBLinearPtr new_linear;
int bytespp = pScrn->bitsPerPixel >> 3;
/* convert size in bytes into number of pixels */
size = (size + bytespp - 1) / bytespp;
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,
"NEOAllocateMemory: linear=%x, size=%d\n", linear, size);
#endif
if (linear){
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,
"NEOAllocateMemory: linear->size=%d\n", linear->size);
#endif
if (linear->size >= size){
return (linear);
}
if (xf86ResizeOffscreenLinear(linear, size)){
return (linear);
}
xf86FreeOffscreenLinear(linear);
}
pScreen = xf86ScrnToScreen(pScrn);
if ((new_linear = xf86AllocateOffscreenLinear(pScreen, size, 16, NULL,
NULL, NULL)) == NULL){
int max_size;
xf86QueryLargestOffscreenLinear(pScreen, &max_size, 16,
PRIORITY_EXTREME);
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,
"NEOAllocateMemory: max_size=%d\n", max_size);
#endif
if (max_size < size){
return (NULL);
}
xf86PurgeUnlockedOffscreenAreas(pScreen);
new_linear = xf86AllocateOffscreenLinear(pScreen,
size, 16, NULL, NULL, NULL);
}
return (new_linear);
}
static int
NEOAllocSurface(ScrnInfoPtr pScrn, int id,
unsigned short width, unsigned short height,
XF86SurfacePtr surface)
{
int pitch, size;
NEOOffscreenPtr pPriv;
FBLinearPtr linear;
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"NEOAllocSurface\n");
#endif
if (width > 1024 || height > 1024){
return (BadAlloc);
}
width = (width + 1) & ~1;
pitch = ((width << 1) + 15) & ~15;
size = pitch * height;
if ((linear = NEOAllocateMemory(pScrn, NULL, size)) == NULL){
return (BadAlloc);
}
surface->width = width;
surface->height = height;
if ((surface->pitches = malloc(sizeof(int))) == NULL){
xf86FreeOffscreenLinear(linear);
return (BadAlloc);
}
if ((surface->offsets = malloc(sizeof(int))) == NULL){
free(surface->pitches);
xf86FreeOffscreenLinear(linear);
return (BadAlloc);
}
if ((pPriv = malloc(sizeof(NEOOffscreenRec))) == NULL){
free(surface->pitches);
free(surface->offsets);
xf86FreeOffscreenLinear(linear);
return (BadAlloc);
}
pPriv->linear = linear;
pPriv->isOn = FALSE;
surface->pScrn = pScrn;
surface->id = id;
surface->pitches[0] = pitch;
surface->offsets[0] = linear->offset << 1;
surface->devPrivate.ptr = (pointer)pPriv;
return (Success);
}
static int
NEOFreeSurface(XF86SurfacePtr surface)
{
NEOOffscreenPtr pPriv = (NEOOffscreenPtr)surface->devPrivate.ptr;
#ifdef DEBUG
xf86DrvMsg(0,X_INFO,"NEOFreeSurface\n");
#endif
if (pPriv->isOn)
NEOStopSurface(surface);
xf86FreeOffscreenLinear(pPriv->linear);
free(surface->pitches);
free(surface->offsets);
free(surface->devPrivate.ptr);
return (Success);
}
static int
NEODisplaySurface(XF86SurfacePtr surface,
short src_x, short src_y, short drw_x, short drw_y,
short src_w, short src_h, short drw_w, short drw_h,
RegionPtr clipBoxes)
{
NEOOffscreenPtr pPriv = (NEOOffscreenPtr)surface->devPrivate.ptr;
NEOPtr nPtr = NEOPTR(surface->pScrn);
NEOPortPtr portPriv = nPtr->overlayAdaptor->pPortPrivates[0].ptr;
INT32 x1, y1, x2, y2;
BoxRec dstBox;
#ifdef DEBUG
xf86DrvMsg(surface->pScrn->scrnIndex,X_INFO,"NEODisplaySurface\n");
#endif
x1 = src_x;
x2 = src_x + src_w;
y1 = src_y;
y2 = src_y + src_h;
dstBox.x1 = drw_x;
dstBox.x2 = drw_x + drw_w;
dstBox.y1 = drw_y;
dstBox.y2 = drw_y + drw_h;
if (!xf86XVClipVideoHelper( &dstBox, &x1, &x2, &y1, &y2,
clipBoxes, surface->width, surface->height)){
return (Success);
}
dstBox.x1 -= surface->pScrn->frameX0;
dstBox.y1 -= surface->pScrn->frameY0;
dstBox.x2 -= surface->pScrn->frameX0;
dstBox.y2 -= surface->pScrn->frameY0;
xf86XVFillKeyHelper(surface->pScrn->pScreen, portPriv->colorKey,
clipBoxes);
NEOResetVideo(surface->pScrn);
NEODisplayVideo(surface->pScrn, surface->id, surface->offsets[0],
surface->width, surface->height, surface->pitches[0],
x1, y1, x2, y2, &dstBox, src_w, src_h, drw_w, drw_h);
pPriv->isOn = TRUE;
if (portPriv->videoStatus & CLIENT_VIDEO_ON){
REGION_EMPTY(surface->pScrn->pScreen, &portPriv->clip);
UpdateCurrentTime();
portPriv->videoStatus = FREE_TIMER;
portPriv->freeTime = currentTime.milliseconds + FREE_DELAY;
}
return (Success);
}
static int
NEOStopSurface(XF86SurfacePtr surface)
{
NEOOffscreenPtr pPriv = (NEOOffscreenPtr)surface->devPrivate.ptr;
#ifdef DEBUG
xf86DrvMsg(surface->pScrn->scrnIndex,X_INFO,"NEOStopSurface\n");
#endif
if (pPriv->isOn){
NEOPtr nPtr = NEOPTR(surface->pScrn);
VGA_HWP(surface->pScrn);
OUTGR(0xb0, 0x02);
pPriv->isOn = FALSE;
}
return (Success);
}
static int
NEOGetSurfaceAttribute(ScrnInfoPtr pScrn, Atom attr, INT32 *value)
{
NEOPtr nPtr = NEOPTR(pScrn);
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"NEOGetSurfaceAttribute\n");
#endif
return (NEOGetPortAttribute(pScrn,
attr, value, (pointer)nPtr->overlayAdaptor->pPortPrivates[0].ptr));
}
static int
NEOSetSurfaceAttribute(ScrnInfoPtr pScrn, Atom attr, INT32 value)
{
NEOPtr nPtr = NEOPTR(pScrn);
#ifdef DEBUG
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"NEOSetSurfaceAttribute\n");
#endif
return (NEOSetPortAttribute(pScrn,
attr, value, (pointer)nPtr->overlayAdaptor->pPortPrivates[0].ptr));
}
xf86-video-neomagic-1.2.9/src/neo_cursor.c 0000644 0001750 0001750 00000022152 12522705002 015231 0000000 0000000 /**********************************************************************
Copyright 1998, 1999 by Precision Insight, Inc., Cedar Park, Texas.
All Rights Reserved
Permission to use, copy, modify, distribute, and sell this software and
its documentation for any purpose is hereby granted without fee,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of Precision Insight not be
used in advertising or publicity pertaining to distribution of the
software without specific, written prior permission. Precision Insight
and its suppliers make no representations about the suitability of this
software for any purpose. It is provided "as is" without express or
implied warranty.
PRECISION INSIGHT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
**********************************************************************/
/*
* The original Precision Insight driver for
* XFree86 v.3.3 has been sponsored by Red Hat.
*
* Authors:
* Jens Owen (jens@tungstengraphics.com)
* Kevin E. Martin (kevin@precisioninsight.com)
*
* Port to Xfree86 v.4.0
* 1998, 1999 by Egbert Eich (Egbert.Eich@Physik.TU-Darmstadt.DE)
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
/* All drivers should typically include these */
#include "xf86.h"
#include "xf86_OSproc.h"
#include "vgaHW.h"
#include "xf86Cursor.h"
#include "cursorstr.h"
/* Driver specific headers */
#include "neo.h"
static void _neoLoadCursorImage(ScrnInfoPtr pScrn, unsigned char *src,
int xoff, int yoff);
void
NeoShowCursor(ScrnInfoPtr pScrn)
{
NEOPtr nPtr = NEOPTR(pScrn);
/* turn cursor on */
OUTREG(NEOREG_CURSCNTL, NEO_CURS_ENABLE);
nPtr->NeoHWCursorShown = TRUE;
}
void
NeoHideCursor(ScrnInfoPtr pScrn)
{
NEOPtr nPtr = NEOPTR(pScrn);
vgaHWPtr hwp = VGAHWPTR(pScrn);
/*
* turn cursor off
*
* Sometimes we loose the I/O map, so directly use I/O here
*/
VGAwGR(0x82,0x00);
nPtr->NeoHWCursorShown = FALSE;
}
#define MAX_CURS 64
#define REVBITS_32(__b) { \
((unsigned char *)&__b)[0] = byte_reversed[((unsigned char *)&__b)[0]]; \
((unsigned char *)&__b)[1] = byte_reversed[((unsigned char *)&__b)[1]]; \
((unsigned char *)&__b)[2] = byte_reversed[((unsigned char *)&__b)[2]]; \
((unsigned char *)&__b)[3] = byte_reversed[((unsigned char *)&__b)[3]]; \
}
static void
neoSetCursorPosition(ScrnInfoPtr pScrn, int x, int y)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
int i;
CARD32 bits, bits2;
unsigned char *_dest = ((unsigned char *)nPtr->NeoFbBase +
nAcl->CursorAddress);
unsigned char *src = nPtr->NeoCursorImage;
int xoff = 0, yoff = 0;
if ((y < 0) && (y > (-MAX_CURS))) {
yoff = -y;
y = 0;
}
if ((x < 0) && (x > (-MAX_CURS))) {
xoff = -x;
x = 0;
}
if (yoff != nPtr->NeoCursorPrevY || xoff !=nPtr->NeoCursorPrevX) {
nPtr->NeoCursorPrevY = yoff;
nPtr->NeoCursorPrevX = xoff;
/* This is for sprites that move off the top of the display.
* this code simply updates the pointer used for loading the sprite.
* Note, in our driver's RealizeCursor, the allocated buffer size
* is twice as large as needed, and we initialize the upper half to all
* zeros, so we can use this pointer trick here.
*/
if (yoff) {
src += (yoff * 16);
}
/* This is for sprites that move off the left edge of the display.
* this code has to do some ugly bit swizzling to generate new cursor
* masks that give the impression the cursor is moving off the screen.
* WARNING: PLATFORM SPECIFIC! This is 32-bit little endian code!
*/
if (xoff)
{
if (xoff < 32) { /* offset 1-31 */
for (i=0; i<256; i+=2) {
bits = ((CARD32 *)src)[i];
bits2 = ((CARD32 *)src)[i+1];
REVBITS_32(bits);
REVBITS_32(bits2);
bits = ((bits >> xoff) | (bits2 << (32-xoff)));
bits2 >>= xoff;
REVBITS_32(bits);
REVBITS_32(bits2);
((CARD32 *) nAcl->CursTemp)[i] = bits;
((CARD32 *) nAcl->CursTemp)[i+1] = bits2;
}
}
else { /* offset 32-63 */
for (i=0; i<256; i+=2) {
bits = ((CARD32 *)src)[i];
bits2 = ((CARD32 *)src)[i+1];
REVBITS_32(bits2);
bits = (bits2 >> (xoff-32));
bits2 = 0;
REVBITS_32(bits);
((CARD32 *)nAcl->CursTemp)[i] = bits;
((CARD32 *)nAcl->CursTemp)[i+1] = bits2;
}
}
src = nAcl->CursTemp;
}
memcpy(_dest, src, 1024);
OUTREG(NEOREG_CURSMEMPOS, ((0x000f & (nAcl->CursorAddress >> 10)) << 8) |
((0x0ff0 & (nAcl->CursorAddress >> 10)) >> 4));
}
/* Move the cursor */
OUTREG(NEOREG_CURSX, x);
OUTREG(NEOREG_CURSY, y);
}
static void
neoSetCursorColors(ScrnInfoPtr pScrn, int bg, int fg)
{
NEOPtr nPtr = NEOPTR(pScrn);
/* swap blue and red */
fg = ((fg & 0xff0000) >> 16) | ((fg & 0xff) << 16) | (fg & 0xff00);
bg = ((bg & 0xff0000) >> 16) | ((bg & 0xff) << 16) | (bg & 0xff00);
/* load colors */
OUTREG(NEOREG_CURSFGCOLOR, fg);
OUTREG(NEOREG_CURSBGCOLOR, bg);
}
static void
_neoLoadCursorImage(ScrnInfoPtr pScrn, unsigned char *src, int xoff, int yoff)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
int i;
unsigned char *_dest, *_src;
int _width, _fill;
for (i = 0; i< nPtr->CursorInfo->MaxHeight - yoff; i++) {
_dest = ((unsigned char *)nPtr->NeoFbBase
+ nAcl->CursorAddress
+ ((nPtr->CursorInfo->MaxWidth >> 2) * i));
_width = (nPtr->CursorInfo->MaxWidth
- (xoff & 0x38)) >> 3;
_src = (src + ((nPtr->CursorInfo->MaxWidth >> 2) * i));
_fill = (xoff & 0x38) >> 3;
memcpy(_dest,_src,_width);
memset(_dest + _width, 0, _fill);
_dest += (nPtr->CursorInfo->MaxWidth >> 3);
_src += (nPtr->CursorInfo->MaxWidth >> 3);
memcpy(_dest,_src,_width);
memset(_dest + _width, 0, _fill);
}
memset(nPtr->NeoFbBase + nAcl->CursorAddress
+ ((nPtr->CursorInfo->MaxWidth >> 2) * i),
0, (nPtr->CursorInfo->MaxHeight - i)
* (nPtr->CursorInfo->MaxWidth >> 2));
/* set cursor address here or we loose the cursor on video mode change */
/* Load storage location. */
OUTREG(NEOREG_CURSMEMPOS, ((0x000f & (nAcl->CursorAddress >> 10)) << 8) |
((0x0ff0 & (nAcl->CursorAddress >> 10)) >> 4));
}
static void
neoLoadCursorImage(ScrnInfoPtr pScrn, unsigned char *src)
{
NEOPtr nPtr = NEOPTR(pScrn);
nPtr->NeoCursorImage = src; /* store src address for later use */
/* Reset these because we have a new cursor image */
nPtr->NeoCursorPrevY = nPtr->NeoCursorPrevX = 0;
_neoLoadCursorImage(pScrn,src,0,0);
}
static Bool
neoUseHWCursor(ScreenPtr pScr, CursorPtr pCurs)
{
NEOACLPtr nAcl = NEOACLPTR(xf86ScreenToScrn(pScr));
return(nAcl->UseHWCursor && !nAcl->NoCursorMode);
}
static unsigned char*
neoRealizeCursor(xf86CursorInfoPtr infoPtr, CursorPtr pCurs)
{
CARD32 *SrcS, *SrcM, *DstS, *DstM;
CARD32 *pSrc, *pMsk;
unsigned char *mem;
int SrcPitch, DstPitch, y, x, z;
mem = (unsigned char*)xnfcalloc(4096,1);
SrcPitch = (pCurs->bits->width + 31) >> 5;
DstPitch = infoPtr->MaxWidth >> 4;
SrcS = (CARD32*)pCurs->bits->source;
SrcM = (CARD32*)pCurs->bits->mask;
DstS = (CARD32*)mem;
DstM = DstS + (DstPitch >> 1);
for(y = pCurs->bits->height, pSrc = DstS, pMsk = DstM;
y--;
pSrc+=DstPitch, pMsk+=DstPitch, SrcS+=SrcPitch, SrcM+=SrcPitch) {
for(x = 0; x < SrcPitch; x++) {
pSrc[x] = ~SrcS[x] & SrcM[x];
pMsk[x] = SrcM[x];
for (z = 0; z < 4; z++) {
((char *)pSrc)[x*4+z] =
byte_reversed[((char *)pSrc)[x*4+z] & 0xFF];
((char *)pMsk)[x*4+z] =
byte_reversed[((char *)pMsk)[x*4+z] & 0xFF];
}
}
#if 0
for (;x < DstPitch; x++) {
pSrc[x] = 0;
pMsk[x] = 0;
}
#endif
}
return (unsigned char *)mem;
}
Bool
NeoCursorInit(ScreenPtr pScreen)
{
ScrnInfoPtr pScrn = xf86ScreenToScrn(pScreen);
NEOPtr nPtr = NEOPTR(pScrn);
xf86CursorInfoPtr infoPtr;
infoPtr = xf86CreateCursorInfoRec();
if(!infoPtr) return FALSE;
nPtr->CursorInfo = infoPtr;
infoPtr->MaxHeight = 64;
infoPtr->MaxWidth = 64;
infoPtr->Flags = HARDWARE_CURSOR_TRUECOLOR_AT_8BPP;
infoPtr->SetCursorColors = neoSetCursorColors;
infoPtr->SetCursorPosition = neoSetCursorPosition;
infoPtr->LoadCursorImage = neoLoadCursorImage;
infoPtr->HideCursor = NeoHideCursor;
infoPtr->ShowCursor = NeoShowCursor;
infoPtr->UseHWCursor = neoUseHWCursor;
infoPtr->RealizeCursor = neoRealizeCursor;
return(xf86InitCursor(pScreen, infoPtr));
}
xf86-video-neomagic-1.2.9/src/neo_shadow.c 0000644 0001750 0001750 00000014054 12522705002 015203 0000000 0000000
/*
Copyright (c) 1999, 2000 The XFree86 Project Inc.
based on code written by Mark Vojkovich
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "xf86.h"
#include "xf86_OSproc.h"
#include "xf86Pci.h"
#include "shadowfb.h"
#include "servermd.h"
#include "neo.h"
void
neoShadowUpdate (ScreenPtr pScreen, shadowBufPtr pBuf)
{
RegionPtr damage = DamageRegion(pBuf->pDamage);
ScrnInfoPtr pScrn;
pScrn = xf86ScreenToScrn(pScreen);
(NEOPTR(pScrn))->refreshArea (pScrn, REGION_NUM_RECTS(damage),
REGION_RECTS(damage));
}
void
neoRefreshArea(ScrnInfoPtr pScrn, int num, BoxPtr pbox)
{
NEOPtr nPtr = NEOPTR(pScrn);
int width, height, Bpp, FBPitch;
unsigned char *src, *dst;
Bpp = pScrn->bitsPerPixel >> 3;
FBPitch = BitmapBytePad(pScrn->displayWidth * pScrn->bitsPerPixel);
while(num--) {
width = (pbox->x2 - pbox->x1) * Bpp;
height = pbox->y2 - pbox->y1;
src = nPtr->ShadowPtr + (pbox->y1 * nPtr->ShadowPitch) +
(pbox->x1 * Bpp);
dst = nPtr->NeoFbBase + (pbox->y1 * FBPitch) + (pbox->x1 * Bpp);
while(height--) {
memcpy(dst, src, width);
dst += FBPitch;
src += nPtr->ShadowPitch;
}
pbox++;
}
}
void
neoPointerMoved(SCRN_ARG_TYPE arg, int x, int y)
{
SCRN_INFO_PTR(arg);
NEOPtr nPtr = NEOPTR(pScrn);
int newX, newY;
if(nPtr->rotate == 1) {
newX = pScrn->pScreen->height - y - 1;
newY = x;
} else {
newX = y;
newY = pScrn->pScreen->width - x - 1;
}
(*nPtr->PointerMoved)(arg, newX, newY);
}
void
neoRefreshArea8(ScrnInfoPtr pScrn, int num, BoxPtr pbox)
{
NEOPtr nPtr = NEOPTR(pScrn);
int count, width, height, y1, y2, dstPitch, srcPitch;
CARD8 *dstPtr, *srcPtr, *src;
CARD32 *dst;
dstPitch = pScrn->displayWidth;
srcPitch = -nPtr->rotate * nPtr->ShadowPitch;
while(num--) {
width = pbox->x2 - pbox->x1;
y1 = pbox->y1 & ~3;
y2 = (pbox->y2 + 3) & ~3;
height = (y2 - y1) >> 2; /* in dwords */
if(nPtr->rotate == 1) {
dstPtr = nPtr->NeoFbBase +
(pbox->x1 * dstPitch) + pScrn->virtualX - y2;
srcPtr = nPtr->ShadowPtr + ((1 - y2) * srcPitch) + pbox->x1;
} else {
dstPtr = nPtr->NeoFbBase +
((pScrn->virtualY - pbox->x2) * dstPitch) + y1;
srcPtr = nPtr->ShadowPtr + (y1 * srcPitch) + pbox->x2 - 1;
}
while(width--) {
src = srcPtr;
dst = (CARD32*)dstPtr;
count = height;
while(count--) {
*(dst++) = src[0] | (src[srcPitch] << 8) |
(src[srcPitch * 2] << 16) |
(src[srcPitch * 3] << 24);
src += srcPitch * 4;
}
srcPtr += nPtr->rotate;
dstPtr += dstPitch;
}
pbox++;
}
}
void
neoRefreshArea16(ScrnInfoPtr pScrn, int num, BoxPtr pbox)
{
NEOPtr nPtr = NEOPTR(pScrn);
int count, width, height, y1, y2, dstPitch, srcPitch;
CARD16 *dstPtr, *srcPtr, *src;
CARD32 *dst;
dstPitch = pScrn->displayWidth;
srcPitch = -nPtr->rotate * nPtr->ShadowPitch >> 1;
while(num--) {
width = pbox->x2 - pbox->x1;
y1 = pbox->y1 & ~1;
y2 = (pbox->y2 + 1) & ~1;
height = (y2 - y1) >> 1; /* in dwords */
if(nPtr->rotate == 1) {
dstPtr = (CARD16*)nPtr->NeoFbBase +
(pbox->x1 * dstPitch) + pScrn->virtualX - y2;
srcPtr = (CARD16*)nPtr->ShadowPtr +
((1 - y2) * srcPitch) + pbox->x1;
} else {
dstPtr = (CARD16*)nPtr->NeoFbBase +
((pScrn->virtualY - pbox->x2) * dstPitch) + y1;
srcPtr = (CARD16*)nPtr->ShadowPtr +
(y1 * srcPitch) + pbox->x2 - 1;
}
while(width--) {
src = srcPtr;
dst = (CARD32*)dstPtr;
count = height;
while(count--) {
*(dst++) = src[0] | (src[srcPitch] << 16);
src += srcPitch * 2;
}
srcPtr += nPtr->rotate;
dstPtr += dstPitch;
}
pbox++;
}
}
/* this one could be faster */
void
neoRefreshArea24(ScrnInfoPtr pScrn, int num, BoxPtr pbox)
{
NEOPtr nPtr = NEOPTR(pScrn);
int count, width, height, y1, y2, dstPitch, srcPitch;
CARD8 *dstPtr, *srcPtr, *src;
CARD32 *dst;
dstPitch = BitmapBytePad(pScrn->displayWidth * 24);
srcPitch = -nPtr->rotate * nPtr->ShadowPitch;
while(num--) {
width = pbox->x2 - pbox->x1;
y1 = pbox->y1 & ~3;
y2 = (pbox->y2 + 3) & ~3;
height = (y2 - y1) >> 2; /* blocks of 3 dwords */
if(nPtr->rotate == 1) {
dstPtr = nPtr->NeoFbBase +
(pbox->x1 * dstPitch) + ((pScrn->virtualX - y2) * 3);
srcPtr = nPtr->ShadowPtr + ((1 - y2) * srcPitch) + (pbox->x1 * 3);
} else {
dstPtr = nPtr->NeoFbBase +
((pScrn->virtualY - pbox->x2) * dstPitch) + (y1 * 3);
srcPtr = nPtr->ShadowPtr + (y1 * srcPitch) + (pbox->x2 * 3) - 3;
}
while(width--) {
src = srcPtr;
dst = (CARD32*)dstPtr;
count = height;
while(count--) {
dst[0] = src[0] | (src[1] << 8) | (src[2] << 16) |
(src[srcPitch] << 24);
dst[1] = src[srcPitch + 1] | (src[srcPitch + 2] << 8) |
(src[srcPitch * 2] << 16) |
(src[(srcPitch * 2) + 1] << 24);
dst[2] = src[(srcPitch * 2) + 2] | (src[srcPitch * 3] << 8) |
(src[(srcPitch * 3) + 1] << 16) |
(src[(srcPitch * 3) + 2] << 24);
dst += 3;
src += srcPitch * 4;
}
srcPtr += nPtr->rotate * 3;
dstPtr += dstPitch;
}
pbox++;
}
}
void
neoRefreshArea32(ScrnInfoPtr pScrn, int num, BoxPtr pbox)
{
NEOPtr nPtr = NEOPTR(pScrn);
int count, width, height, dstPitch, srcPitch;
CARD32 *dstPtr, *srcPtr, *src, *dst;
dstPitch = pScrn->displayWidth;
srcPitch = -nPtr->rotate * nPtr->ShadowPitch >> 2;
while(num--) {
width = pbox->x2 - pbox->x1;
height = pbox->y2 - pbox->y1;
if(nPtr->rotate == 1) {
dstPtr = (CARD32*)nPtr->NeoFbBase +
(pbox->x1 * dstPitch) + pScrn->virtualX - pbox->y2;
srcPtr = (CARD32*)nPtr->ShadowPtr +
((1 - pbox->y2) * srcPitch) + pbox->x1;
} else {
dstPtr = (CARD32*)nPtr->NeoFbBase +
((pScrn->virtualY - pbox->x2) * dstPitch) + pbox->y1;
srcPtr = (CARD32*)nPtr->ShadowPtr +
(pbox->y1 * srcPitch) + pbox->x2 - 1;
}
while(width--) {
src = srcPtr;
dst = dstPtr;
count = height;
while(count--) {
*(dst++) = *src;
src += srcPitch;
}
srcPtr += nPtr->rotate;
dstPtr += dstPitch;
}
pbox++;
}
}
xf86-video-neomagic-1.2.9/src/neo.h 0000644 0001750 0001750 00000023212 12522705002 013637 0000000 0000000 /**********************************************************************
Copyright 1998, 1999 by Precision Insight, Inc., Cedar Park, Texas.
All Rights Reserved
Permission to use, copy, modify, distribute, and sell this software and
its documentation for any purpose is hereby granted without fee,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of Precision Insight not be
used in advertising or publicity pertaining to distribution of the
software without specific, written prior permission. Precision Insight
and its suppliers make no representations about the suitability of this
software for any purpose. It is provided "as is" without express or
implied warranty.
PRECISION INSIGHT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
**********************************************************************/
/*
* The original Precision Insight driver for
* XFree86 v.3.3 has been sponsored by Red Hat.
*
* Authors:
* Jens Owen (jens@tungstengraphics.com)
* Kevin E. Martin (kevin@precisioninsight.com)
*
* Port to Xfree86 v.4.0
* 1998, 1999 by Egbert Eich (Egbert.Eich@Physik.TU-Darmstadt.DE)
*/
#include
#include "neo_pcirename.h"
/* All drivers should typically include these */
#include "xf86.h"
#include "xf86_OSproc.h"
/* Everything using inb/outb, etc needs "compiler.h" */
#include "compiler.h"
#ifdef HAVE_XAA_H
#include "xaa.h"
#include "xaalocal.h" /* XAA internals as we replace some of XAA */
#endif
#include "xf86fbman.h"
#include "xf86Cursor.h"
#include "shadowfb.h"
#include "vbe.h"
/* Needed by the Shadow Framebuffer */
#include "shadow.h"
/* Drivers that need to access the PCI config space directly need this */
#include "xf86Pci.h"
#include "xf86i2c.h"
#include "xf86xv.h"
#include
/*
* Driver data structures.
*/
#include "neo_reg.h"
#include "neo_macros.h"
#include "compat-api.h"
/* Supported chipsets */
typedef enum {
NM2070,
NM2090,
NM2093,
NM2097,
NM2160,
NM2200,
NM2230,
NM2360,
NM2380
} NEOType;
/* function prototypes */
extern Bool NEOSwitchMode(SWITCH_MODE_ARGS_DECL);
extern void NEOAdjustFrame(ADJUST_FRAME_ARGS_DECL);
/* in neo_2070.c */
extern Bool Neo2070AccelInit(ScreenPtr pScreen);
/* in neo_2090.c */
extern Bool Neo2090AccelInit(ScreenPtr pScreen);
/* in neo_2097.c */
extern Bool Neo2097AccelInit(ScreenPtr pScreen);
/* in neo_2200.c */
extern Bool Neo2200AccelInit(ScreenPtr pScreen);
/* in neo_cursor.c */
extern Bool NeoCursorInit(ScreenPtr pScrn);
extern void NeoShowCursor(ScrnInfoPtr pScrn);
extern void NeoHideCursor(ScrnInfoPtr pScrn);
/* in neo_i2c.c */
extern Bool neo_I2CInit(ScrnInfoPtr pScrn);
/* in neo_shadow.c */
void neoShadowUpdate (ScreenPtr pScreen, shadowBufPtr pBuf);
void neoPointerMoved(SCRN_ARG_TYPE arg, int x, int y);
void neoRefreshArea(ScrnInfoPtr pScrn, int num, BoxPtr pbox);
void neoRefreshArea8(ScrnInfoPtr pScrn, int num, BoxPtr pbox);
void neoRefreshArea16(ScrnInfoPtr pScrn, int num, BoxPtr pbox);
void neoRefreshArea24(ScrnInfoPtr pScrn, int num, BoxPtr pbox);
void neoRefreshArea32(ScrnInfoPtr pScrn, int num, BoxPtr pbox);
/* in neo_dga.c */
Bool NEODGAInit(ScreenPtr pScreen);
/* in neo_video.c */
extern void NEOInitVideo(ScreenPtr pScreen);
extern void NEOResetVideo(ScrnInfoPtr pScrn);
/* shadow regs */
#define NEO_EXT_CR_MAX 0x85
#define NEO_EXT_GR_MAX 0xC7
typedef struct {
unsigned char CR[NEO_EXT_CR_MAX+1];
unsigned char GR[NEO_EXT_GR_MAX+1];
} regSaveRec, *regSavePtr;
/* registers */
typedef struct {
unsigned char GeneralLockReg;
unsigned char ExtCRTDispAddr;
unsigned char ExtCRTOffset;
unsigned char SysIfaceCntl1;
unsigned char SysIfaceCntl2;
unsigned char ExtColorModeSelect;
unsigned char SingleAddrPage;
unsigned char DualAddrPage;
unsigned char biosMode;
unsigned char PanelDispCntlReg1;
unsigned char PanelDispCntlReg2;
unsigned char PanelDispCntlReg3;
unsigned char PanelVertCenterReg1;
unsigned char PanelVertCenterReg2;
unsigned char PanelVertCenterReg3;
unsigned char PanelVertCenterReg4;
unsigned char PanelVertCenterReg5;
unsigned char PanelHorizCenterReg1;
unsigned char PanelHorizCenterReg2;
unsigned char PanelHorizCenterReg3;
unsigned char PanelHorizCenterReg4;
unsigned char PanelHorizCenterReg5;
unsigned char Sequencer1;
Bool ProgramVCLK;
unsigned char VCLK3NumeratorLow;
unsigned char VCLK3NumeratorHigh;
unsigned char VCLK3Denominator;
unsigned char VerticalExt;
regSavePtr reg;
} NeoRegRec, *NeoRegPtr;
typedef struct {
/* Hardware cursor address */
unsigned int CursorAddress;
Bool UseHWCursor;
Bool NoCursorMode;
unsigned char CursTemp[1024];
/* Boundaries of the pixmap cache */
unsigned int cacheStart;
unsigned int cacheEnd;
/* Blitter */
unsigned int tmpBltCntlFlags;
unsigned int BltCntlFlags;
unsigned int BltModeFlags;
unsigned int ColorShiftAmt;
unsigned int Pitch;
unsigned int PixelWidth;
unsigned int PlaneMask;
int CPUToScreenColorExpandFill_x;
int CPUToScreenColorExpandFill_y;
int CPUToScreenColorExpandFill_w;
int CPUToScreenColorExpandFill_h;
int CPUToScreenColorExpandFill_skipleft;
} NEOACLRec, *NEOACLPtr;
#define NEOACLPTR(p) &((NEOPtr)((p)->driverPrivate))->Accel
/* globals */
typedef struct neoRec
{
int NeoChipset;
pciVideoPtr PciInfo;
#ifndef XSERVER_LIBPCIACCESS
PCITAG PciTag;
#endif
EntityInfoPtr pEnt;
#ifdef HAVE_XAA_H
XAAInfoRecPtr AccelInfoRec;
#endif
NEOACLRec Accel;
unsigned long NeoMMIOAddr;
unsigned long NeoLinearAddr;
unsigned char* NeoMMIOBase;
unsigned long NeoMMIOAddr2;
unsigned char* NeoMMIOBase2;
unsigned char* NeoFbBase;
long NeoFbMapSize;
unsigned long vgaIOBase;
DGAModePtr DGAModes;
int numDGAModes;
Bool DGAactive;
int DGAViewportStatus;
/* ??? */
int NeoFifoCount;
/* cursor */
int NeoCursorMem;
Bool NeoHWCursorShown;
Bool NeoHWCursorInitialized;
xf86CursorInfoPtr CursorInfo;
int NeoCursorOffset;
int NeoCursorPrevX;
int NeoCursorPrevY;
unsigned char *NeoCursorImage;
/* Panels size */
int NeoPanelWidth;
int NeoPanelHeight;
/* options */
OptionInfoPtr Options;
Bool noAccel;
Bool noAccelSet;
Bool swCursor;
Bool noMMIO;
Bool internDisp;
Bool externDisp;
Bool noLcdStretch;
Bool shadowFB;
Bool lcdCenter;
Bool onPciBurst;
Bool progLcdRegs;
Bool progLcdStretch;
Bool progLcdStretchOpt;
Bool overrideValidate;
Bool strangeLockups;
/* registers */
NeoRegRec NeoModeReg;
NeoRegRec NeoSavedReg;
/* proc pointer */
CloseScreenProcPtr CloseScreen;
I2CBusPtr I2C;
vbeInfoPtr pVbe;
unsigned char * ShadowPtr;
int ShadowPitch;
CreateScreenResourcesProcPtr CreateScreenResources;
RefreshAreaFuncPtr refreshArea;
void (*PointerMoved)(SCRN_ARG_TYPE arg, int x, int y);
int rotate;
Bool showcache;
Bool video;
double videoHZoom;
double videoVZoom;
XF86VideoAdaptorPtr overlayAdaptor;
int overlay;
int overlay_offset;
int videoKey;
int interlace;
} NEORec, *NEOPtr;
typedef struct {
int x_res;
int y_res;
int mode;
} biosMode;
/* The privates of the NEO driver */
#define NEOPTR(p) ((NEOPtr)((p)->driverPrivate))
/* I/O register offsets */
#define GRAX 0x3CE
/* vga IO functions */
#define VGArCR(index) (*hwp->readCrtc)(hwp, index)
#define VGAwCR(index, val) (*hwp->writeCrtc)(hwp, index, val)
#define VGArGR(index) (*hwp->readGr)(hwp, index)
#define VGAwGR(index, val) (*hwp->writeGr)(hwp, index, val)
#define VGArSR(index) (*hwp->readSeq)(hwp, index)
#define VGAwSR(index, val) (*hwp->writeSeq)(hwp, index, val)
/* memory mapped register access macros */
#define INREG8(addr) MMIO_IN8(nPtr->NeoMMIOBase, addr)
#define INREG16(addr) MMIO_IN16(nPtr->NeoMMIOBase, addr)
#define INREG(addr) MMIO_IN32(nPtr->NeoMMIOBase, addr)
#define OUTREG8(addr, val) MMIO_OUT8(nPtr->NeoMMIOBase, addr, val)
#define OUTREG16(addr, val) MMIO_OUT16(nPtr->NeoMMIOBase, addr, val)
#define OUTREG(addr, val) MMIO_OUT32(nPtr->NeoMMIOBase, addr, val)
/* This swizzle macro is to support the manipulation of cursor masks when
* the sprite moves off the left edge of the display. This code is
* platform specific, and is known to work with 32bit little endian machines
*/
#define SWIZZLE32(__b) { \
((unsigned char *)&__b)[0] = byte_reversed[((unsigned char *)&__b)[0]]; \
((unsigned char *)&__b)[1] = byte_reversed[((unsigned char *)&__b)[1]]; \
((unsigned char *)&__b)[2] = byte_reversed[((unsigned char *)&__b)[2]]; \
((unsigned char *)&__b)[3] = byte_reversed[((unsigned char *)&__b)[3]]; \
}
#define PROBED_NM2070 0x01
#define PROBED_NM2090 0x42
#define PROBED_NM2093 0x43
#define PROBED_NM2097 0x83
#define PROBED_NM2160 0x44
#define PROBED_NM2200 0x45
#define PCI_VENDOR_NEOMAGIC 0x10C8
#define PCI_CHIP_NM2070 0x0001
#define PCI_CHIP_NM2090 0x0002
#define PCI_CHIP_NM2093 0x0003
#define PCI_CHIP_NM2097 0x0083
#define PCI_CHIP_NM2160 0x0004
#define PCI_CHIP_NM2200 0x0005
#define PCI_CHIP_NM2230 0x0025
#define PCI_CHIP_NM2360 0x0006
#define PCI_CHIP_NM2380 0x0016
xf86-video-neomagic-1.2.9/src/neo_i2c.c 0000644 0001750 0001750 00000005724 12522705002 014377 0000000 0000000 /**********************************************************************
Copyright 1998, 1999 by Precision Insight, Inc., Cedar Park, Texas.
All Rights Reserved
Permission to use, copy, modify, distribute, and sell this software and
its documentation for any purpose is hereby granted without fee,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of Precision Insight not be
used in advertising or publicity pertaining to distribution of the
software without specific, written prior permission. Precision Insight
and its suppliers make no representations about the suitability of this
software for any purpose. It is provided "as is" without express or
implied warranty.
PRECISION INSIGHT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
**********************************************************************/
/*
* The original Precision Insight driver for
* XFree86 v.3.3 has been sponsored by Red Hat.
*
* Authors:
* Jens Owen (jens@tungstengraphics.com)
* Kevin E. Martin (kevin@precisioninsight.com)
*
* Port to Xfree86 v.4.0
* 1998, 1999 by Egbert Eich (Egbert.Eich@Physik.TU-Darmstadt.DE)
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "xf86.h"
#include "xf86_OSproc.h"
#include "compiler.h"
#include "xf86Pci.h"
#include "vgaHW.h"
#include "neo.h"
static void
neo_I2CPutBits(I2CBusPtr b, int clock, int data) {
vgaHWPtr hwp = VGAHWPTR(xf86Screens[b->scrnIndex]);
unsigned int reg = 0xF0;
VGAwCR(0x21,0x00);
VGAwCR(0x1D,0x01);
if(clock) reg |= 1;
if(data) reg |= 0x4;
VGAwGR(0xA1,reg);
/*ErrorF("neo_I2CPutBits: %d %d\n", clock, data); */
}
static void
neo_I2CGetBits(I2CBusPtr b, int *clock, int *data) {
unsigned int reg;
vgaHWPtr hwp = VGAHWPTR(xf86Screens[b->scrnIndex]);
reg = VGArGR(0xA1);
*clock = 1 /* (reg & 0x?? ) */;
*data = (reg & 0x8) != 0;
/*ErrorF("neo_I2CGetBits: %d %d\n", *clock, *data);*/
}
Bool
neo_I2CInit(ScrnInfoPtr pScrn)
{
NEOPtr pNeo = NEOPTR(pScrn);
I2CBusPtr I2CPtr;
I2CPtr = xf86CreateI2CBusRec();
if(!I2CPtr) return FALSE;
pNeo->I2C = I2CPtr;
I2CPtr->BusName = "I2C bus";
I2CPtr->scrnIndex = pScrn->scrnIndex;
I2CPtr->I2CPutBits = neo_I2CPutBits;
I2CPtr->I2CGetBits = neo_I2CGetBits;
/* increase these as the defaults are too low */
I2CPtr->RiseFallTime = 2;
I2CPtr->HoldTime = 40;
if (!xf86I2CBusInit(I2CPtr))
return FALSE;
return TRUE;
}
xf86-video-neomagic-1.2.9/src/neo_driver.c 0000644 0001750 0001750 00000253234 12523102771 015223 0000000 0000000 /**********************************************************************
Copyright 1998, 1999 by Precision Insight, Inc., Cedar Park, Texas.
All Rights Reserved
Permission to use, copy, modify, distribute, and sell this software and
its documentation for any purpose is hereby granted without fee,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of Precision Insight not be
used in advertising or publicity pertaining to distribution of the
software without specific, written prior permission. Precision Insight
and its suppliers make no representations about the suitability of this
software for any purpose. It is provided "as is" without express or
implied warranty.
PRECISION INSIGHT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
**********************************************************************/
/*
* Copyright 1998, 1999 Egbert Eich
* Copyright 2000, 2001 SuSE GmbH, Author: Egbert Eich
* Copyright 2002 SuSE Linux AG, Author: Egbert Eich
* Copyright 2002 Shigehiro Nomura
*/
/*
* The original Precision Insight driver for
* XFree86 v.3.3 has been sponsored by Red Hat.
*
* Authors:
* Jens Owen (jens@tungstengraphics.com)
* Kevin E. Martin (kevin@precisioninsight.com)
*
* Port to Xfree86 v.4.0
* 1998, 1999 by Egbert Eich (Egbert.Eich@Physik.TU-Darmstadt.DE)
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
/* All drivers should typically include these */
#include "xf86.h"
#include "xf86_OSproc.h"
/* Everything using inb/outb, etc needs "compiler.h" */
#include "compiler.h"
#if GET_ABI_MAJOR(ABI_VIDEODRV_VERSION) < 6
#include "xf86Resources.h"
/* Needed by Resources Access Control (RAC) */
#include "xf86RAC.h"
#endif
/* Drivers that need to access the PCI config space directly need this */
#include "xf86Pci.h"
/* All drivers using the vgahw module need this */
#include "vgaHW.h"
/* All drivers initialising the SW cursor need this */
#include "mipointer.h"
/* All drivers using the mi colormap manipulation need this */
#include "micmap.h"
#include "xf86cmap.h"
#include "fb.h"
/* int10 */
#include "xf86int10.h"
#include "vbe.h"
/* Needed for Device Data Channel (DDC) support */
#include "xf86DDC.h"
#include "picturestr.h"
#include "xf86xv.h"
#include
/*
* Driver data structures.
*/
#include "neo.h"
#include "neo_reg.h"
#include "neo_macros.h"
/* These need to be checked */
#include
#include
#include "scrnintstr.h"
#include "servermd.h"
#include
#include
/* Mandatory functions */
static const OptionInfoRec * NEOAvailableOptions(int chipid, int busid);
static void NEOIdentify(int flags);
static Bool NEOProbe(DriverPtr drv, int flags);
static Bool NEOPreInit(ScrnInfoPtr pScrn, int flags);
static Bool NEOScreenInit(SCREEN_INIT_ARGS_DECL);
static Bool NEOEnterVT(VT_FUNC_ARGS_DECL);
static void NEOLeaveVT(VT_FUNC_ARGS_DECL);
static Bool NEOCloseScreen(CLOSE_SCREEN_ARGS_DECL);
static void NEOFreeScreen(FREE_SCREEN_ARGS_DECL);
static ModeStatus NEOValidMode(SCRN_ARG_TYPE arg, DisplayModePtr mode,
Bool verbose, int flags);
/* Internally used functions */
static int neoFindIsaDevice(GDevPtr dev);
static Bool neoModeInit(ScrnInfoPtr pScrn, DisplayModePtr mode);
static void neoSave(ScrnInfoPtr pScrn);
static void neoRestore(ScrnInfoPtr pScrn, vgaRegPtr VgaReg,
NeoRegPtr NeoReg, Bool restoreText);
static void neoLock(ScrnInfoPtr pScrn);
static void neoUnlock(ScrnInfoPtr pScrn);
static Bool neoMapMem(ScrnInfoPtr pScrn);
static Bool neoUnmapMem(ScrnInfoPtr pScrn);
static void neoProgramShadowRegs(ScrnInfoPtr pScrn, vgaRegPtr VgaReg,
NeoRegPtr restore);
static void neoCalcVCLK(ScrnInfoPtr pScrn, long freq);
static xf86MonPtr neo_ddc1(ScrnInfoPtr pScrn);
static Bool neoDoDDC1(ScrnInfoPtr pScrn);
static Bool neoDoDDC2(ScrnInfoPtr pScrn);
static Bool neoDoDDCVBE(ScrnInfoPtr pScrn);
static void neoProbeDDC(ScrnInfoPtr pScrn, int index);
static void NeoDisplayPowerManagementSet(ScrnInfoPtr pScrn,
int PowerManagementMode, int flags);
static int neoFindMode(int xres, int yres, int depth);
#define NEO_VERSION 4000
#define NEO_NAME "NEOMAGIC"
#define NEO_DRIVER_NAME "neomagic"
#define NEO_MAJOR_VERSION PACKAGE_VERSION_MAJOR
#define NEO_MINOR_VERSION PACKAGE_VERSION_MINOR
#define NEO_PATCHLEVEL PACKAGE_VERSION_PATCHLEVEL
/*
* This is intentionally screen-independent. It indicates the binding
* choice made in the first PreInit.
*/
static int pix24bpp = 0;
static biosMode bios8[] = {
{ 320, 240, 0x40 },
{ 300, 400, 0x42 },
{ 640, 400, 0x20 },
{ 640, 480, 0x21 },
{ 800, 600, 0x23 },
{ 1024, 768, 0x25 }
};
static biosMode bios15[] = {
{ 320, 200, 0x2D },
{ 640, 480, 0x30 },
{ 800, 600, 0x33 },
{ 1024, 768, 0x36 }
};
static biosMode bios16[] = {
{ 320, 200, 0x2e },
{ 320, 240, 0x41 },
{ 300, 400, 0x43 },
{ 640, 480, 0x31 },
{ 800, 600, 0x34 },
{ 1024, 768, 0x37 }
};
static biosMode bios24[] = {
{ 640, 480, 0x32 },
{ 800, 600, 0x35 },
{ 1024, 768, 0x38 }
};
static DisplayModeRec neo800x480Mode = {
NULL, /* prev */
NULL, /* next */
"800x480", /* identifier of this mode */
MODE_OK, /* mode status */
M_T_BUILTIN, /* mode type */
35260, /* Clock frequency */
800, /* HDisplay */
856, /* HSyncStart */
1040, /* HSyncEnd */
1056, /* HTotal */
0, /* HSkew */
480, /* VDisplay */
480, /* VSyncStart */
486, /* VSyncEnd */
488, /* VTotal */
0, /* VScan */
V_PHSYNC | V_PVSYNC, /* Flags */
-1, /* ClockIndex */
35260, /* SynthClock */
800, /* CRTC HDisplay */
800, /* CRTC HBlankStart */
856, /* CRTC HSyncStart */
1040, /* CRTC HSyncEnd */
872, /* CRTC HBlankEnd */
1048, /* CRTC HTotal */
0, /* CRTC HSkew */
480, /* CRTC VDisplay */
480, /* CRTC VBlankStart */
480, /* CRTC VSyncStart */
486, /* CRTC VSyncEnd */
487, /* CRTC VBlankEnd */
488, /* CRTC VTotal */
FALSE, /* CrtcHAdjusted */
FALSE, /* CrtcVAdjusted */
0, /* PrivSize */
NULL, /* Private */
0.0, /* HSync */
0.0 /* VRefresh */
};
static DisplayModeRec neo1024x480Mode = {
NULL, /* prev */
NULL, /* next */
"1024x480", /* identifier of this mode */
MODE_OK, /* mode status */
M_T_BUILTIN, /* mode type */
45900, /* Clock frequency */
1024, /* HDisplay */
1048, /* HSyncStart */
1184, /* HSyncEnd */
1344, /* HTotal */
0, /* HSkew */
480, /* VDisplay */
480, /* VSyncStart */
486, /* VSyncEnd */
488, /* VTotal */
0, /* VScan */
V_PHSYNC | V_PVSYNC, /* Flags */
-1, /* ClockIndex */
45900, /* SynthClock */
1024, /* CRTC HDisplay */
1024, /* CRTC HBlankStart */
1048, /* CRTC HSyncStart */
1184, /* CRTC HSyncEnd */
1072, /* CRTC HBlankEnd */
1344, /* CRTC HTotal */
0, /* CRTC HSkew */
480, /* CRTC VDisplay */
480, /* CRTC VBlankStart */
480, /* CRTC VSyncStart */
486, /* CRTC VSyncEnd */
487, /* CRTC VBlankEnd */
488, /* CRTC VTotal */
FALSE, /* CrtcHAdjusted */
FALSE, /* CrtcVAdjusted */
0, /* PrivSize */
NULL, /* Private */
0.0, /* HSync */
0.0 /* VRefresh */
};
/*
* This contains the functions needed by the server after loading the driver
* module. It must be supplied, and gets passed back by the SetupProc
* function in the dynamic case. In the static case, a reference to this
* is compiled in, and this requires that the name of this DriverRec be
* an upper-case version of the driver name.
*/
_X_EXPORT DriverRec NEOMAGIC = {
NEO_VERSION,
NEO_DRIVER_NAME,
NEOIdentify,
NEOProbe,
NEOAvailableOptions,
NULL,
0
};
static SymTabRec NEOChipsets[] = {
{ NM2070, "neo2070" },
{ NM2090, "neo2090" },
{ NM2093, "neo2093" },
{ NM2097, "neo2097" },
{ NM2160, "neo2160" },
{ NM2200, "neo2200" },
{ NM2230, "neo2230" },
{ NM2360, "neo2360" },
{ NM2380, "neo2380" },
{ -1, NULL }
};
/* Conversion PCI ID to chipset name */
static PciChipsets NEOPCIchipsets[] = {
{ NM2070, PCI_CHIP_NM2070, RES_SHARED_VGA },
{ NM2090, PCI_CHIP_NM2090, RES_SHARED_VGA },
{ NM2093, PCI_CHIP_NM2093, RES_SHARED_VGA },
{ NM2097, PCI_CHIP_NM2097, RES_SHARED_VGA },
{ NM2160, PCI_CHIP_NM2160, RES_SHARED_VGA },
{ NM2200, PCI_CHIP_NM2200, RES_SHARED_VGA },
{ NM2230, PCI_CHIP_NM2230, RES_SHARED_VGA },
{ NM2360, PCI_CHIP_NM2360, RES_SHARED_VGA },
{ NM2380, PCI_CHIP_NM2380, RES_SHARED_VGA },
{ -1, -1, RES_UNDEFINED}
};
#ifdef HAVE_ISA
static IsaChipsets NEOISAchipsets[] = {
{ NM2070, RES_EXCLUSIVE_VGA },
{ NM2090, RES_EXCLUSIVE_VGA },
{ NM2093, RES_EXCLUSIVE_VGA },
{ NM2097, RES_EXCLUSIVE_VGA },
{ NM2160, RES_EXCLUSIVE_VGA },
{ NM2200, RES_EXCLUSIVE_VGA },
{ -1, RES_UNDEFINED }
};
#endif
/* The options supported by the Neomagic Driver */
typedef enum {
OPTION_NOACCEL,
OPTION_SW_CURSOR,
OPTION_NO_MMIO,
OPTION_INTERN_DISP,
OPTION_EXTERN_DISP,
OPTION_LCD_CENTER,
OPTION_LCD_STRETCH,
OPTION_SHADOW_FB,
OPTION_PCI_BURST,
OPTION_PROG_LCD_MODE_REGS,
OPTION_PROG_LCD_MODE_STRETCH,
OPTION_OVERRIDE_VALIDATE_MODE,
OPTION_SHOWCACHE,
OPTION_ROTATE,
OPTION_VIDEO_KEY,
OPTION_OVERLAYMEM,
OPTION_VIDEO_INTERLACE,
OPTION_DISPLAY_HEIGHT_480,
OPTION_STRANGE_LOCKUPS
} NEOOpts;
static const OptionInfoRec NEO_2070_Options[] = {
{ OPTION_NOACCEL, "NoAccel", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_SW_CURSOR, "SWcursor", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_NO_MMIO, "noMMIO", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_INTERN_DISP,"internDisp", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_EXTERN_DISP,"externDisp", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_LCD_CENTER, "LcdCenter", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_LCD_STRETCH, "NoStretch", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_SHADOW_FB, "ShadowFB", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_PCI_BURST, "pciBurst", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_SHOWCACHE, "ShowCache", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_ROTATE, "Rotate", OPTV_ANYSTR, {0}, FALSE },
{ OPTION_PROG_LCD_MODE_REGS, "progLcdModeRegs",
OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_PROG_LCD_MODE_STRETCH, "progLcdModeStretch",
OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_OVERRIDE_VALIDATE_MODE, "overrideValidateMode",
OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_VIDEO_KEY, "VideoKey", OPTV_INTEGER, {0}, FALSE },
{ OPTION_OVERLAYMEM, "OverlayMem", OPTV_INTEGER, {0}, FALSE },
{ OPTION_VIDEO_INTERLACE, "Interlace",
OPTV_INTEGER, {0}, FALSE },
{ -1, NULL, OPTV_NONE, {0}, FALSE }
};
static const OptionInfoRec NEOOptions[] = {
{ OPTION_NOACCEL, "NoAccel", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_SW_CURSOR, "SWcursor", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_NO_MMIO, "noMMIO", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_INTERN_DISP,"internDisp", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_EXTERN_DISP,"externDisp", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_LCD_CENTER, "LcdCenter", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_SHADOW_FB, "ShadowFB", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_LCD_STRETCH,"NoStretch", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_PCI_BURST, "pciBurst", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_SHOWCACHE, "ShowCache", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_ROTATE, "Rotate", OPTV_ANYSTR, {0}, FALSE },
{ OPTION_STRANGE_LOCKUPS, "StrangeLockups", OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_DISPLAY_HEIGHT_480, "DisplayHeight480",
OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_PROG_LCD_MODE_REGS, "progLcdModeRegs",
OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_PROG_LCD_MODE_STRETCH, "progLcdModeStretch",
OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_OVERRIDE_VALIDATE_MODE, "overrideValidateMode",
OPTV_BOOLEAN, {0}, FALSE },
{ OPTION_VIDEO_KEY, "VideoKey", OPTV_INTEGER, {0}, FALSE },
{ OPTION_OVERLAYMEM, "OverlayMem", OPTV_INTEGER, {0}, FALSE },
{ OPTION_VIDEO_INTERLACE, "Interlace",
OPTV_INTEGER, {0}, FALSE },
{ -1, NULL, OPTV_NONE, {0}, FALSE }
};
#ifdef XFree86LOADER
static MODULESETUPPROTO(neoSetup);
static XF86ModuleVersionInfo neoVersRec =
{
"neomagic",
MODULEVENDORSTRING,
MODINFOSTRING1,
MODINFOSTRING2,
XORG_VERSION_CURRENT,
NEO_MAJOR_VERSION, NEO_MINOR_VERSION, NEO_PATCHLEVEL,
ABI_CLASS_VIDEODRV,
ABI_VIDEODRV_VERSION,
MOD_CLASS_VIDEODRV,
{0,0,0,0}
};
/*
* This is the module init data.
* Its name has to be the driver name followed by ModuleData
*/
_X_EXPORT XF86ModuleData neomagicModuleData = { &neoVersRec, neoSetup, NULL };
static pointer
neoSetup(pointer module, pointer opts, int *errmaj, int *errmin)
{
static Bool setupDone = FALSE;
if (!setupDone) {
setupDone = TRUE;
xf86AddDriver(&NEOMAGIC, module, 0);
/*
* The return value must be non-NULL on success even though there
* is no TearDownProc.
*/
return (pointer)1;
} else {
if (errmaj) *errmaj = LDR_ONCEONLY;
return NULL;
}
}
#endif /* XFree86LOADER */
static Bool
NEOGetRec(ScrnInfoPtr pScrn)
{
/*
* Allocate a NEORec, and hook it into pScrn->driverPrivate.
* pScrn->driverPrivate is initialised to NULL, so we can check if
* the allocation has already been done.
*/
if (pScrn->driverPrivate != NULL)
return TRUE;
pScrn->driverPrivate = xnfcalloc(sizeof(NEORec), 1);
if (pScrn->driverPrivate == NULL)
return FALSE;
return TRUE;
}
static void
NEOFreeRec(ScrnInfoPtr pScrn)
{
if (pScrn->driverPrivate == NULL)
return;
free(pScrn->driverPrivate);
pScrn->driverPrivate = NULL;
}
static const OptionInfoRec *
NEOAvailableOptions(int chipid, int busid)
{
int chip = (chipid & 0x0000ffff);
if (chip == PCI_CHIP_NM2070)
return NEO_2070_Options;
else
return NEOOptions;
}
/* Mandatory */
static void
NEOIdentify(int flags)
{
xf86PrintChipsets(NEO_NAME, "Driver for Neomagic chipsets",
NEOChipsets);
}
/* Mandatory */
static Bool
NEOProbe(DriverPtr drv, int flags)
{
Bool foundScreen = FALSE;
int numDevSections, numUsed;
GDevPtr *devSections;
int *usedChips;
int i;
/*
* Find the config file Device sections that match this
* driver, and return if there are none.
*/
if ((numDevSections = xf86MatchDevice(NEO_DRIVER_NAME,
&devSections)) <= 0) {
return FALSE;
}
/* PCI BUS */
#ifndef XSERVER_LIBPCIACCESS
if (xf86GetPciVideoInfo() )
#endif
{
numUsed = xf86MatchPciInstances(NEO_NAME, PCI_VENDOR_NEOMAGIC,
NEOChipsets, NEOPCIchipsets,
devSections,numDevSections,
drv, &usedChips);
if (numUsed > 0) {
if (flags & PROBE_DETECT)
foundScreen = TRUE;
else for (i = 0; i < numUsed; i++) {
ScrnInfoPtr pScrn = NULL;
/* Allocate a ScrnInfoRec and claim the slot */
if ((pScrn = xf86ConfigPciEntity(pScrn, 0, usedChips[i],
NEOPCIchipsets,NULL, NULL,
NULL, NULL, NULL))) {
pScrn->driverVersion = NEO_VERSION;
pScrn->driverName = NEO_DRIVER_NAME;
pScrn->name = NEO_NAME;
pScrn->Probe = NEOProbe;
pScrn->PreInit = NEOPreInit;
pScrn->ScreenInit = NEOScreenInit;
pScrn->SwitchMode = NEOSwitchMode;
pScrn->AdjustFrame = NEOAdjustFrame;
pScrn->EnterVT = NEOEnterVT;
pScrn->LeaveVT = NEOLeaveVT;
pScrn->FreeScreen = NEOFreeScreen;
pScrn->ValidMode = NEOValidMode;
foundScreen = TRUE;
}
}
free(usedChips);
}
}
#ifdef HAVE_ISA
/* Isa Bus */
numUsed = xf86MatchIsaInstances(NEO_NAME,NEOChipsets,NEOISAchipsets,
drv,neoFindIsaDevice,devSections,
numDevSections,&usedChips);
if (numUsed > 0) {
if (flags & PROBE_DETECT)
foundScreen = TRUE;
else for (i = 0; i < numUsed; i++) {
ScrnInfoPtr pScrn = NULL;
if ((pScrn = xf86ConfigIsaEntity(pScrn, 0, usedChips[i],
NEOISAchipsets, NULL, NULL,
NULL, NULL, NULL))) {
pScrn->driverVersion = NEO_VERSION;
pScrn->driverName = NEO_DRIVER_NAME;
pScrn->name = NEO_NAME;
pScrn->Probe = NEOProbe;
pScrn->PreInit = NEOPreInit;
pScrn->ScreenInit = NEOScreenInit;
pScrn->SwitchMode = NEOSwitchMode;
pScrn->AdjustFrame = NEOAdjustFrame;
pScrn->EnterVT = NEOEnterVT;
pScrn->LeaveVT = NEOLeaveVT;
pScrn->FreeScreen = NEOFreeScreen;
pScrn->ValidMode = NEOValidMode;
foundScreen = TRUE;
}
}
free(usedChips);
}
#endif
free(devSections);
return foundScreen;
}
#ifdef HAVE_ISA
static int
neoFindIsaDevice(GDevPtr dev)
{
unsigned int vgaIOBase;
unsigned char id;
vgaIOBase = (inb(0x3CC) & 0x01) ? 0x3D0 : 0x3B0;
/* §§§ Too intrusive ? */
outw(GRAX, 0x2609); /* Unlock NeoMagic registers */
outb(vgaIOBase + 4, 0x1A);
id = inb(vgaIOBase + 5);
outw(GRAX, 0x0009); /* Lock NeoMagic registers */
switch (id) {
case PROBED_NM2070 :
return NM2070;
case PROBED_NM2090 :
return NM2090;
case PROBED_NM2093 :
return NM2093;
default :
return -1;
}
}
#endif
/* Mandatory */
Bool
NEOPreInit(ScrnInfoPtr pScrn, int flags)
{
ClockRangePtr clockRanges;
int i;
NEOPtr nPtr;
vgaHWPtr hwp;
int bppSupport = NoDepth24Support;
int videoRam = 896;
int maxClock = 65000;
int CursorMem = 1024;
int CursorOff = 0x100;
int linearSize = 1024;
int maxWidth = 1024;
int maxHeight = 1024;
unsigned char type, dpy;
int w;
int apertureSize;
Bool height_480 = FALSE;
Bool lcdCenterOptSet = FALSE;
const char *s;
if (flags & PROBE_DETECT) {
neoProbeDDC( pScrn, xf86GetEntityInfo(pScrn->entityList[0])->index );
return TRUE;
}
/* The vgahw module should be loaded here when needed */
if (!xf86LoadSubModule(pScrn, "vgahw"))
return FALSE;
/*
* Allocate a vgaHWRec.
*/
if (!vgaHWGetHWRec(pScrn))
return FALSE;
hwp = VGAHWPTR(pScrn);
vgaHWSetStdFuncs(hwp);
/* Allocate the NeoRec driverPrivate */
if (!NEOGetRec(pScrn)) {
return FALSE;
}
# define RETURN \
{ NEOFreeRec(pScrn);\
return FALSE;\
}
nPtr = NEOPTR(pScrn);
/* Since, the capabilities are determined by the chipset the very
* first thing to do is, figure out the chipset and its capabilities
*/
/* This driver doesn't expect more than one entity per screen */
if (pScrn->numEntities > 1)
RETURN;
/* This is the general case */
for (i = 0; inumEntities; i++) {
nPtr->pEnt = xf86GetEntityInfo(pScrn->entityList[i]);
#ifndef XSERVER_LIBPCIACCESS
if (nPtr->pEnt->resources) return FALSE;
#endif
nPtr->NeoChipset = nPtr->pEnt->chipset;
pScrn->chipset = (char *)xf86TokenToString(NEOChipsets,
nPtr->pEnt->chipset);
/* This driver can handle ISA and PCI buses */
if (nPtr->pEnt->location.type == BUS_PCI) {
nPtr->PciInfo = xf86GetPciInfoForEntity(nPtr->pEnt->index);
#ifndef XSERVER_LIBPCIACCESS
nPtr->PciTag = pciTag(nPtr->PciInfo->bus,
nPtr->PciInfo->device,
nPtr->PciInfo->func);
#endif
}
}
xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Chipset is a ");
switch(nPtr->NeoChipset){
case NM2070:
xf86ErrorF("MagicGraph 128 (NM2070)");
break;
case NM2090 :
xf86ErrorF("MagicGraph 128V (NM2090)");
break;
case NM2093 :
xf86ErrorF("MagicGraph 128ZV (NM2093)");
break;
case NM2097 :
xf86ErrorF("MagicGraph 128ZV+ (NM2097)");
break;
case NM2160 :
xf86ErrorF("MagicGraph 128XD (NM2160)");
break;
case NM2200 :
xf86ErrorF("MagicMedia 256AV (NM2200)");
break;
case NM2230 :
xf86ErrorF("MagicMedia 256AV+ (NM2230)");
break;
case NM2360 :
xf86ErrorF("MagicMedia 256ZX (NM2360)");
break;
case NM2380 :
xf86ErrorF("MagicMedia 256XL+ (NM2380)");
break;
}
xf86ErrorF("\n");
vgaHWGetIOBase(hwp);
nPtr->vgaIOBase = hwp->IOBase;
vgaHWSetStdFuncs(hwp);
/* Determine the panel type */
VGAwGR(0x09,0x26);
type = VGArGR(0x21);
dpy = VGArGR(0x20);
/* Determine panel width -- used in NeoValidMode. */
w = VGArGR(0x20);
VGAwGR(0x09,0x00);
switch ((w & 0x18) >> 3) {
case 0x00 :
nPtr->NeoPanelWidth = 640;
nPtr->NeoPanelHeight = 480;
break;
case 0x01 :
nPtr->NeoPanelWidth = 800;
nPtr->NeoPanelHeight = 600;
break;
case 0x02 :
nPtr->NeoPanelWidth = 1024;
nPtr->NeoPanelHeight = 768;
break;
case 0x03 :
/* 1280x1024 panel support needs to be added */
#ifdef NOT_DONE
nPtr->NeoPanelWidth = 1280;
nPtr->NeoPanelHeight = 1024;
break;
#else
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"Only 640x480,\n"
" 800x600,\n"
" and 1024x768 panels are currently supported\n");
return FALSE;
#endif
default :
nPtr->NeoPanelWidth = 640;
nPtr->NeoPanelHeight = 480;
break;
}
xf86DrvMsg(pScrn->scrnIndex, X_PROBED, "Panel is a %dx%d %s %s display\n",
nPtr->NeoPanelWidth,
nPtr->NeoPanelHeight,
(type & 0x02) ? "color" : "monochrome",
(type & 0x10) ? "TFT" : "dual scan");
switch (nPtr->NeoChipset){
case NM2070:
bppSupport = NoDepth24Support;
videoRam = 896;
maxClock = 65000;
CursorMem = 2048;
CursorOff = 0x100;
linearSize = 1024;
maxWidth = 1024;
maxHeight = 1024;
break;
case NM2090:
case NM2093:
bppSupport = Support24bppFb | Support32bppFb |
SupportConvert32to24 | PreferConvert32to24;
videoRam = 1152;
maxClock = 80000;
CursorMem = 2048;
CursorOff = 0x100;
linearSize = 2048;
maxWidth = 1024;
maxHeight = 1024;
break;
case NM2097:
bppSupport = Support24bppFb | Support32bppFb |
SupportConvert32to24 | PreferConvert32to24;
videoRam = 1152;
maxClock = 80000;
CursorMem = 1024;
CursorOff = 0x100;
linearSize = 2048;
maxWidth = 1024;
maxHeight = 1024;
break;
case NM2160:
bppSupport = Support24bppFb | Support32bppFb |
SupportConvert32to24 | PreferConvert32to24;
videoRam = 2048;
maxClock = 90000;
CursorMem = 1024;
CursorOff = 0x100;
linearSize = 2048;
maxWidth = 1024;
maxHeight = 1024;
break;
case NM2200:
bppSupport = Support24bppFb | Support32bppFb |
SupportConvert32to24 | PreferConvert32to24;
videoRam = 2560;
maxClock = 110000;
CursorMem = 1024;
CursorOff = 0x1000;
linearSize = 4096;
maxWidth = 1280;
maxHeight = 1024; /* ???? */
break;
case NM2230:
bppSupport = Support24bppFb | Support32bppFb |
SupportConvert32to24 | PreferConvert32to24;
videoRam = 3008;
maxClock = 110000;
CursorMem = 1024;
CursorOff = 0x1000;
linearSize = 4096;
maxWidth = 1280;
maxHeight = 1024; /* ???? */
break;
case NM2360:
bppSupport = Support24bppFb | Support32bppFb |
SupportConvert32to24 | PreferConvert32to24;
videoRam = 4096;
maxClock = 110000;
CursorMem = 1024;
CursorOff = 0x1000;
linearSize = 4096;
maxWidth = 1280;
maxHeight = 1024; /* ???? */
break;
case NM2380:
bppSupport = Support24bppFb | Support32bppFb |
SupportConvert32to24 | PreferConvert32to24;
videoRam = 6144;
maxClock = 110000;
CursorMem = 1024;
CursorOff = 0x1000;
linearSize = 8192;
maxWidth = 1280;
maxHeight = 1024; /* ???? */
break;
}
pScrn->monitor = pScrn->confScreen->monitor;
if (xf86LoadSubModule(pScrn, "ddc")) {
#if 1 /* for DDC1 testing */
if (!neoDoDDCVBE(pScrn))
if (!neoDoDDC2(pScrn))
#endif
neoDoDDC1(pScrn);
}
if (!xf86SetDepthBpp(pScrn, 16, 0, 0, bppSupport ))
return FALSE;
else {
/* Check that the returned depth is one we support */
switch (pScrn->depth) {
case 8:
case 15:
case 16:
break;
case 24:
if (nPtr->NeoChipset != NM2070)
break;
default:
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"Given depth (%d) is not supported by this driver\n",
pScrn->depth);
return FALSE;
}
}
xf86PrintDepthBpp(pScrn);
if (pScrn->depth == 8)
pScrn->rgbBits = 6;
/* Get the depth24 pixmap format */
if (pScrn->depth == 24 && pix24bpp == 0)
pix24bpp = xf86GetBppFromDepth(pScrn, 24);
/*
* This must happen after pScrn->display has been set because
* xf86SetWeight references it.
*/
if (pScrn->depth > 8) {
/* The defaults are OK for us */
rgb zeros = {0, 0, 0};
if (!xf86SetWeight(pScrn, zeros, zeros)) {
return FALSE;
} else {
/* XXX check that weight returned is supported */
;
}
}
if (!xf86SetDefaultVisual(pScrn, -1))
return FALSE;
if (pScrn->depth > 1) {
Gamma zeros = {0.0, 0.0, 0.0};
if (!xf86SetGamma(pScrn, zeros))
return FALSE;
}
nPtr->strangeLockups = TRUE;
/* Collect all of the relevant option flags (fill in pScrn->options) */
xf86CollectOptions(pScrn, NULL);
/* Process the options */
if (nPtr->NeoChipset == NM2070) {
if (!(nPtr->Options = malloc(sizeof(NEO_2070_Options))))
return FALSE;
memcpy(nPtr->Options, NEO_2070_Options, sizeof(NEO_2070_Options));
} else {
if (!(nPtr->Options = malloc(sizeof(NEOOptions))))
return FALSE;
memcpy(nPtr->Options, NEOOptions, sizeof(NEOOptions));
}
xf86ProcessOptions(pScrn->scrnIndex, pScrn->options, nPtr->Options);
xf86GetOptValBool(nPtr->Options, OPTION_SW_CURSOR,&nPtr->swCursor);
xf86GetOptValBool(nPtr->Options, OPTION_NO_MMIO,&nPtr->noMMIO);
xf86GetOptValBool(nPtr->Options, OPTION_INTERN_DISP,&nPtr->internDisp);
xf86GetOptValBool(nPtr->Options, OPTION_EXTERN_DISP,&nPtr->externDisp);
if (xf86GetOptValBool(nPtr->Options, OPTION_LCD_CENTER,&nPtr->lcdCenter))
lcdCenterOptSet = TRUE;
xf86GetOptValBool(nPtr->Options, OPTION_LCD_STRETCH,&nPtr->noLcdStretch);
xf86GetOptValBool(nPtr->Options, OPTION_SHADOW_FB,&nPtr->shadowFB);
xf86GetOptValBool(nPtr->Options, OPTION_SHOWCACHE,&nPtr->showcache);
nPtr->onPciBurst = TRUE;
xf86GetOptValBool(nPtr->Options, OPTION_PCI_BURST,&nPtr->onPciBurst);
xf86GetOptValBool(nPtr->Options,
OPTION_PROG_LCD_MODE_REGS,&nPtr->progLcdRegs);
if (xf86GetOptValBool(nPtr->Options,
OPTION_PROG_LCD_MODE_STRETCH,&nPtr->progLcdStretch))
nPtr->progLcdStretchOpt = TRUE;
xf86GetOptValBool(nPtr->Options,
OPTION_OVERRIDE_VALIDATE_MODE, &nPtr->overrideValidate);
xf86GetOptValBool(nPtr->Options, OPTION_DISPLAY_HEIGHT_480,&height_480);
xf86GetOptValBool(nPtr->Options, OPTION_STRANGE_LOCKUPS,
&nPtr->strangeLockups);
nPtr->noAccelSet =
xf86GetOptValBool(nPtr->Options, OPTION_NOACCEL,&nPtr->noAccel);
nPtr->rotate = 0;
if ((s = xf86GetOptValString(nPtr->Options, OPTION_ROTATE))) {
if(!xf86NameCmp(s, "CW")) {
/* accel is disabled below for shadowFB */
nPtr->shadowFB = TRUE;
nPtr->swCursor = TRUE;
nPtr->rotate = 1;
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG,
"Rotating screen clockwise - acceleration disabled\n");
} else if(!xf86NameCmp(s, "CCW")) {
nPtr->shadowFB = TRUE;
nPtr->swCursor = TRUE;
nPtr->rotate = -1;
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Rotating screen"
"counter clockwise - acceleration disabled\n");
} else {
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "\"%s\" is not a valid"
"value for Option \"Rotate\"\n", s);
xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Valid options are \"CW\" or \"CCW\"\n");
}
}
if(xf86GetOptValInteger(nPtr->Options,
OPTION_VIDEO_KEY, &(nPtr->videoKey))) {
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "video key set to 0x%x\n",
nPtr->videoKey);
} else {
nPtr->videoKey = (1 << pScrn->offset.red) |
(1 << pScrn->offset.green) |
(((pScrn->mask.blue >> pScrn->offset.blue) - 1)
<< pScrn->offset.blue);
}
if(xf86GetOptValInteger(nPtr->Options, OPTION_OVERLAYMEM,
&(nPtr->overlay))) {
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG,
"reserve %d bytes for overlay.\n", nPtr->overlay);
} else {
nPtr->overlay = 0;
}
nPtr->interlace = 0;
if(xf86GetOptValInteger(nPtr->Options, OPTION_VIDEO_INTERLACE,
&(nPtr->interlace))) {
if (nPtr->interlace >= 0 && nPtr->interlace <= 2){
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "interlace flag = %d\n",
nPtr->interlace);
} else {
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG,
"\"%s\" is not a valid value for "
"Option \"Interlaced\"\n", s);
xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Valid options are 0..2\n");
}
}
if (height_480
&& (nPtr->NeoPanelWidth == 800 || nPtr->NeoPanelWidth == 1024)) {
xf86DrvMsg(pScrn->scrnIndex,X_CONFIG,
"Overriding Panel height: Set to 480\n");
nPtr->NeoPanelHeight = 480;
xf86DrvMsg(pScrn->scrnIndex,X_CONFIG,
"Disabling LCD stretching for panel height 480\n");
nPtr->noLcdStretch = TRUE;
if (!lcdCenterOptSet)
nPtr->lcdCenter = TRUE;
}
if (nPtr->internDisp && nPtr->externDisp)
xf86DrvMsg(pScrn->scrnIndex,X_CONFIG,
"Simultaneous LCD/CRT display mode\n");
else if (nPtr->externDisp)
xf86DrvMsg(pScrn->scrnIndex,X_CONFIG,
"External CRT only display mode\n");
else if (nPtr->internDisp)
xf86DrvMsg(pScrn->scrnIndex,X_CONFIG,
"Internal LCD only display mode\n");
else {
nPtr->internDisp = ((dpy & 0x02) == 0x02);
nPtr->externDisp = ((dpy & 0x01) == 0x01);
if (nPtr->internDisp && nPtr->externDisp)
xf86DrvMsg(pScrn->scrnIndex,X_PROBED,
"Simultaneous LCD/CRT display mode\n");
else if (nPtr->externDisp)
xf86DrvMsg(pScrn->scrnIndex,X_PROBED,
"External CRT only display mode\n");
else if (nPtr->internDisp)
xf86DrvMsg(pScrn->scrnIndex,X_PROBED,
"Internal LCD only display mode\n");
else {
/* this is a fallback if probed values are bogus */
nPtr->internDisp = TRUE;
xf86DrvMsg(pScrn->scrnIndex,X_DEFAULT,
"Internal LCD only display mode\n");
}
}
if (nPtr->noLcdStretch)
xf86DrvMsg(pScrn->scrnIndex,X_CONFIG,
"Low resolution video modes are not stretched\n");
if (nPtr->lcdCenter)
xf86DrvMsg(pScrn->scrnIndex,X_CONFIG,
"Video modes are centered on the display\n");
if (nPtr->swCursor)
xf86DrvMsg(pScrn->scrnIndex,X_CONFIG, "using sofware cursor\n");
if (nPtr->noMMIO)
xf86DrvMsg(pScrn->scrnIndex,X_CONFIG, "MMIO mode disabled\n");
if (nPtr->onPciBurst)
xf86DrvMsg(pScrn->scrnIndex,X_CONFIG, "using PCI Burst mode\n");
if (nPtr->strangeLockups)
xf86DrvMsg(pScrn->scrnIndex,X_CONFIG,
"Option StrangeLockups set: disabling some acceleration\n");
if (nPtr->showcache)
xf86DrvMsg(pScrn->scrnIndex,X_CONFIG,
"Show chache for debugging\n");
if (!xf86LoadSubModule(pScrn, "xaa")) {
xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Falling back to shadow\n");
nPtr->shadowFB = 1;
}
if (nPtr->shadowFB) {
if (!xf86LoadSubModule(pScrn, "shadow")) {
RETURN;
}
}
if (nPtr->shadowFB) {
nPtr->noAccel = TRUE;
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG,
"Using \"Shadow Framebuffer\" - acceleration disabled\n");
}
nPtr->NeoFbMapSize = linearSize * 1024;
nPtr->NeoCursorOffset = CursorOff;
if (nPtr->pEnt->device->MemBase) {
/* XXX Check this matches a PCI base address */
nPtr->NeoLinearAddr = nPtr->pEnt->device->MemBase;
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG,
"FB base address is set at 0x%lX.\n",
nPtr->NeoLinearAddr);
} else {
nPtr->NeoLinearAddr = 0;
}
nPtr->NeoMMIOAddr2 = 0;
nPtr->NeoMMIOBase2 = NULL;
if (nPtr->pEnt->device->IOBase && !nPtr->noMMIO) {
/* XXX Check this matches a PCI base address */
nPtr->NeoMMIOAddr = nPtr->pEnt->device->IOBase;
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG,
"MMIO base address is set at 0x%lX.\n",
nPtr->NeoMMIOAddr);
} else {
nPtr->NeoMMIOAddr = 0;
}
if (nPtr->pEnt->location.type == BUS_PCI) {
if (!nPtr->NeoLinearAddr) {
nPtr->NeoLinearAddr = PCI_REGION_BASE(nPtr->PciInfo, 0, REGION_MEM);
xf86DrvMsg(pScrn->scrnIndex, X_PROBED,
"FB base address is set at 0x%lX.\n",
nPtr->NeoLinearAddr);
}
if (!nPtr->NeoMMIOAddr && !nPtr->noMMIO) {
switch (nPtr->NeoChipset) {
case NM2070 :
nPtr->NeoMMIOAddr = nPtr->NeoLinearAddr + 0x100000;
break;
case NM2090:
case NM2093:
nPtr->NeoMMIOAddr = nPtr->NeoLinearAddr + 0x200000;
break;
case NM2160:
case NM2097:
case NM2200:
case NM2230:
case NM2360:
case NM2380:
nPtr->NeoMMIOAddr = PCI_REGION_BASE(nPtr->PciInfo, 1, REGION_MEM);
nPtr->NeoMMIOAddr2 = PCI_REGION_BASE(nPtr->PciInfo, 2, REGION_MEM);
break;
}
xf86DrvMsg(pScrn->scrnIndex, X_PROBED,
"MMIO base address is set at 0x%lX.\n",
nPtr->NeoMMIOAddr);
if (nPtr->NeoMMIOAddr2 != 0){
xf86DrvMsg(pScrn->scrnIndex, X_PROBED,
"MMIO base address2 is set at 0x%lX.\n",
nPtr->NeoMMIOAddr2);
}
}
#ifndef XSERVER_LIBPCIACCESS
/* XXX What about VGA resources in OPERATING mode? */
if (xf86RegisterResources(nPtr->pEnt->index, NULL, ResExclusive))
RETURN;
#endif
}
#ifndef XSERVER_LIBPCIACCESS
else if (nPtr->pEnt->location.type == BUS_ISA) {
unsigned int addr;
resRange linearRes[] = { {ResExcMemBlock|ResBios|ResBus,0,0},_END };
if (!nPtr->NeoLinearAddr) {
VGAwGR(0x09,0x26);
addr = VGArGR(0x13);
VGAwGR(0x09,0x00);
nPtr->NeoLinearAddr = addr << 20;
xf86DrvMsg(pScrn->scrnIndex, X_PROBED,
"FB base address is set at 0x%lX.\n",
nPtr->NeoLinearAddr);
}
if (!nPtr->NeoMMIOAddr && !nPtr->noMMIO) {
nPtr->NeoMMIOAddr = nPtr->NeoLinearAddr + 0x100000;
xf86DrvMsg(pScrn->scrnIndex, X_PROBED,
"MMIO base address is set at 0x%lX.\n",
nPtr->NeoMMIOAddr);
}
linearRes[0].rBegin = nPtr->NeoLinearAddr;
linearRes[1].rEnd = nPtr->NeoLinearAddr + nPtr->NeoFbMapSize - 1;
if (xf86RegisterResources(nPtr->pEnt->index,linearRes,ResNone)) {
RETURN;
}
}
#endif
else
RETURN;
if (nPtr->pEnt->device->videoRam != 0) {
pScrn->videoRam = nPtr->pEnt->device->videoRam;
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "VideoRAM: %d kByte\n",
pScrn->videoRam);
} else {
pScrn->videoRam = videoRam;
xf86DrvMsg(pScrn->scrnIndex, X_PROBED, "VideoRAM: %d kByte\n",
pScrn->videoRam);
}
if (nPtr->pEnt->device->dacSpeeds[0] != 0) {
maxClock = nPtr->pEnt->device->dacSpeeds[0];
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Max Clock: %d kHz\n",
maxClock);
} else {
xf86DrvMsg(pScrn->scrnIndex, X_PROBED, "Max Clock: %d kHz\n",
maxClock);
}
pScrn->progClock = TRUE;
/*
* Setup the ClockRanges, which describe what clock ranges are available,
* and what sort of modes they can be used for.
*/
clockRanges = (ClockRangePtr)xnfcalloc(sizeof(ClockRange), 1);
clockRanges->next = NULL;
clockRanges->ClockMulFactor = 1;
clockRanges->minClock = 11000; /* guessed §§§ */
clockRanges->maxClock = maxClock;
clockRanges->clockIndex = -1; /* programmable */
clockRanges->interlaceAllowed = FALSE;
clockRanges->doubleScanAllowed = TRUE;
/* Subtract memory for HW cursor */
if (!nPtr->swCursor)
nPtr->NeoCursorMem = CursorMem;
else
nPtr->NeoCursorMem = 0;
apertureSize = (pScrn->videoRam * 1024) - nPtr->NeoCursorMem;
if ((nPtr->NeoPanelWidth == 800) && (nPtr->NeoPanelHeight == 480)) {
neo800x480Mode.next = pScrn->monitor->Modes;
pScrn->monitor->Modes = &neo800x480Mode;
}
if ((nPtr->NeoPanelWidth == 1024) && (nPtr->NeoPanelHeight == 480)) {
neo1024x480Mode.next = pScrn->monitor->Modes;
pScrn->monitor->Modes = &neo1024x480Mode;
}
if (!pScrn->monitor->DDC) {
/*
* If the monitor parameters are not specified explicitly, set them
* so that 60Hz modes up to the panel size are allowed.
*/
if (pScrn->monitor->nHsync == 0) {
pScrn->monitor->nHsync = 1;
pScrn->monitor->hsync[0].lo = 28;
pScrn->monitor->hsync[0].hi =
60.0 * 1.07 * nPtr->NeoPanelHeight / 1000.0;
xf86DrvMsg(pScrn->scrnIndex, X_PROBED,
"Using hsync range matching panel size: %.2f-%.2f kHz\n",
pScrn->monitor->hsync[0].lo,
pScrn->monitor->hsync[0].hi);
}
if (pScrn->monitor->nVrefresh == 0) {
pScrn->monitor->nVrefresh = 1;
pScrn->monitor->vrefresh[0].lo = 55.0;
pScrn->monitor->vrefresh[0].hi = 65.0;
xf86DrvMsg(pScrn->scrnIndex, X_PROBED,
"Using vsync range for panel: %.2f-%.2f kHz\n",
pScrn->monitor->vrefresh[0].lo,
pScrn->monitor->vrefresh[0].hi);
}
}
/*
* For external displays, limit the width to 1024 pixels or less.
*/
{
i = xf86ValidateModes(pScrn, pScrn->monitor->Modes,
pScrn->display->modes, clockRanges,
NULL, 256, maxWidth,(8 * pScrn->bitsPerPixel),/*§§§*/
128, maxHeight, pScrn->display->virtualX,
pScrn->display->virtualY, apertureSize,
LOOKUP_BEST_REFRESH);
if (i == -1)
RETURN;
}
/* Prune the modes marked as invalid */
xf86PruneDriverModes(pScrn);
if (i == 0 || pScrn->modes == NULL) {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "No valid modes found\n");
RETURN;
}
/*
* Set the CRTC parameters for all of the modes based on the type
* of mode, and the chipset's interlace requirements.
*
* Calling this is required if the mode->Crtc* values are used by the
* driver and if the driver doesn't provide code to set them. They
* are not pre-initialised at all.
*/
xf86SetCrtcForModes(pScrn, 0);
/* Set the current mode to the first in the list */
pScrn->currentMode = pScrn->modes;
/* Print the list of modes being used */
xf86PrintModes(pScrn);
/* If monitor resolution is set on the command line, use it */
xf86SetDpi(pScrn, 0, 0);
if (xf86LoadSubModule(pScrn, "fb") == NULL) {
RETURN;
}
if (!nPtr->swCursor) {
if (!xf86LoadSubModule(pScrn, "ramdac"))
RETURN;
}
return TRUE;
}
#undef RETURN
/* Mandatory */
static Bool
NEOEnterVT(VT_FUNC_ARGS_DECL)
{
SCRN_INFO_PTR(arg);
NEOPtr nPtr = NEOPTR(pScrn);
/* Should we re-save the text mode on each VT enter? */
if(!neoModeInit(pScrn, pScrn->currentMode))
return FALSE;
if (nPtr->video)
NEOResetVideo(pScrn);
if (nPtr->NeoHWCursorShown)
NeoShowCursor(pScrn);
NEOAdjustFrame(ADJUST_FRAME_ARGS(pScrn, pScrn->frameX0, pScrn->frameY0));
return TRUE;
}
/* Mandatory */
static void
NEOLeaveVT(VT_FUNC_ARGS_DECL)
{
SCRN_INFO_PTR(arg);
NEOPtr nPtr = NEOPTR(pScrn);
/* Invalidate the cached acceleration registers */
if (nPtr->NeoHWCursorShown)
NeoHideCursor(pScrn);
neoRestore(pScrn, &(VGAHWPTR(pScrn))->SavedReg, &nPtr->NeoSavedReg, TRUE);
neoLock(pScrn);
}
static void
NEOLoadPalette(
ScrnInfoPtr pScrn,
int numColors,
int *indices,
LOCO *colors,
VisualPtr pVisual
){
int i, index, shift, Gshift;
vgaHWPtr hwp = VGAHWPTR(pScrn);
switch(pScrn->depth) {
case 15:
shift = Gshift = 1;
break;
case 16:
shift = 0;
Gshift = 0;
break;
default:
shift = Gshift = 0;
break;
}
for(i = 0; i < numColors; i++) {
index = indices[i];
hwp->writeDacWriteAddr(hwp, index);
DACDelay(hwp);
hwp->writeDacData(hwp, colors[index].red << shift);
DACDelay(hwp);
hwp->writeDacData(hwp, colors[index].green << Gshift);
DACDelay(hwp);
hwp->writeDacData(hwp, colors[index].blue << shift);
DACDelay(hwp);
}
}
static Bool
NEOCreateScreenResources(ScreenPtr pScreen)
{
ScrnInfoPtr pScrn = xf86ScreenToScrn(pScreen);
NEOPtr pNeo = NEOPTR(pScrn);
PixmapPtr pPixmap;
Bool ret;
pScreen->CreateScreenResources = pNeo->CreateScreenResources;
ret = pScreen->CreateScreenResources(pScreen);
pScreen->CreateScreenResources = NEOCreateScreenResources;
if (!ret)
return FALSE;
pPixmap = pScreen->GetScreenPixmap(pScreen);
if (!shadowAdd(pScreen, pPixmap, neoShadowUpdate,
NULL, 0, NULL)) {
return FALSE;
}
return TRUE;
}
static Bool
NEOShadowInit(ScreenPtr pScreen)
{
ScrnInfoPtr pScrn = xf86ScreenToScrn(pScreen);
NEOPtr pNeo = NEOPTR(pScrn);
if (!shadowSetup(pScreen))
return FALSE;
pNeo->CreateScreenResources = pScreen->CreateScreenResources;
pScreen->CreateScreenResources = NEOCreateScreenResources;
return TRUE;
}
static Bool
NEOSaveScreen(ScreenPtr pScreen, int mode)
{
return vgaHWSaveScreen(pScreen, mode);
}
/* Mandatory */
static Bool
NEOScreenInit(SCREEN_INIT_ARGS_DECL)
{
ScrnInfoPtr pScrn;
vgaHWPtr hwp;
NEOPtr nPtr;
NEOACLPtr nAcl;
int ret;
VisualPtr visual;
int allocatebase, freespace, currentaddr;
#ifndef XSERVER_LIBPCIACCESS
unsigned int racflag = RAC_FB;
#endif
unsigned char *FBStart;
int height, width, displayWidth;
/*
* we need to get the ScrnInfoRec for this screen, so let's allocate
* one first thing
*/
pScrn = xf86ScreenToScrn(pScreen);
nPtr = NEOPTR(pScrn);
nAcl = NEOACLPTR(pScrn);
hwp = VGAHWPTR(pScrn);
hwp->MapSize = 0x10000; /* Standard 64k VGA window */
/* Map the VGA memory */
if (!vgaHWMapMem(pScrn))
return FALSE;
/* Map the Neo memory and possible MMIO areas */
if (!neoMapMem(pScrn))
return FALSE;
/*
* next we save the current state and setup the first mode
*/
neoSave(pScrn);
if (!neoModeInit(pScrn,pScrn->currentMode))
return FALSE;
vgaHWSaveScreen(pScreen,SCREEN_SAVER_ON);
NEOAdjustFrame(ADJUST_FRAME_ARGS(pScrn, pScrn->frameX0, pScrn->frameY0));
/*
* Reset visual list.
*/
miClearVisualTypes();
/* Setup the visuals we support. */
if (!miSetVisualTypes(pScrn->depth,
miGetDefaultVisualMask(pScrn->depth),
pScrn->rgbBits, pScrn->defaultVisual))
return FALSE;
if (!miSetPixmapDepths ()) return FALSE;
/*
* Call the framebuffer layer's ScreenInit function, and fill in other
* pScreen fields.
*/
displayWidth = pScrn->displayWidth;
if (nPtr->rotate) {
height = pScrn->virtualX;
width = pScrn->virtualY;
} else {
width = pScrn->virtualX;
height = pScrn->virtualY;
}
if(nPtr->shadowFB) {
nPtr->ShadowPitch = BitmapBytePad(pScrn->bitsPerPixel * width);
nPtr->ShadowPtr = malloc(nPtr->ShadowPitch * height);
displayWidth = nPtr->ShadowPitch / (pScrn->bitsPerPixel >> 3);
FBStart = nPtr->ShadowPtr;
} else {
nPtr->ShadowPtr = NULL;
FBStart = nPtr->NeoFbBase;
}
ret = fbScreenInit(pScreen, FBStart,
width, height,
pScrn->xDpi, pScrn->yDpi,
displayWidth, pScrn->bitsPerPixel);
if (!ret)
return FALSE;
if (pScrn->depth > 8) {
/* Fixup RGB ordering */
visual = pScreen->visuals + pScreen->numVisuals;
while (--visual >= pScreen->visuals) {
if ((visual->class | DynamicClass) == DirectColor) {
visual->offsetRed = pScrn->offset.red;
visual->offsetGreen = pScrn->offset.green;
visual->offsetBlue = pScrn->offset.blue;
visual->redMask = pScrn->mask.red;
visual->greenMask = pScrn->mask.green;
visual->blueMask = pScrn->mask.blue;
}
}
}
/* must be after RGB ordering fixed */
fbPictureInit(pScreen, 0, 0);
xf86SetBlackWhitePixels(pScreen);
if (!nPtr->shadowFB)
NEODGAInit(pScreen);
nPtr->NeoHWCursorShown = FALSE;
nPtr->NeoHWCursorInitialized = FALSE;
nAcl->UseHWCursor = FALSE;
nAcl->CursorAddress = -1;
nAcl->cacheStart = -1;
nAcl->cacheEnd = -1;
xf86DrvMsg(pScrn->scrnIndex,X_INFO,
"Using linear framebuffer at: 0x%08lX\n",
nPtr->NeoLinearAddr);
/* Setup pointers to free space in video ram */
allocatebase = (pScrn->videoRam << 10);
freespace = allocatebase - pScrn->displayWidth *
pScrn->virtualY * (pScrn->bitsPerPixel >> 3);
currentaddr = allocatebase;
xf86DrvMsg(pScrn->scrnIndex, X_PROBED,
"%d bytes off-screen memory available\n", freespace);
if (nPtr->swCursor || !nPtr->NeoMMIOBase) {
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG,
"Using Software Cursor.\n");
} else if (nPtr->NeoCursorMem <= freespace) {
currentaddr -= nPtr->NeoCursorMem;
freespace -= nPtr->NeoCursorMem;
/* alignment */
freespace -= currentaddr & 0x3FF;
currentaddr &= 0xfffffc00;
nAcl->CursorAddress = currentaddr;
xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Using H/W Cursor.\n");
} else {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"Too little space for H/W cursor.\n");
}
if (!nPtr->noAccel && !nPtr->NeoMMIOBase)
xf86DrvMsg(pScrn->scrnIndex,X_INFO,
"Acceleration disabled when not using MMIO\n");
if (nPtr->overlay > 0){
if (nPtr->overlay > freespace){
xf86DrvMsg(pScrn->scrnIndex,X_INFO,
"Can not reserve %d bytes for overlay. "
"Resize to %d bytes.\n",
nPtr->overlay, freespace);
nPtr->overlay = freespace;
}
currentaddr -= nPtr->overlay;
freespace -= nPtr->overlay;
nPtr->overlay_offset = currentaddr;
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"Overlay at 0x%x\n",
nPtr->overlay_offset);
}
nAcl->cacheStart = currentaddr - freespace;
nAcl->cacheEnd = currentaddr;
freespace = 0;
if (nAcl->cacheStart < nAcl->cacheEnd) {
BoxRec AvailFBArea;
int lines = nAcl->cacheEnd /
(pScrn->displayWidth * (pScrn->bitsPerPixel >> 3));
if (!nPtr->noAccel && nPtr->NeoMMIOBase && lines > 1024)
lines = 1024;
AvailFBArea.x1 = 0;
AvailFBArea.y1 = 0;
AvailFBArea.x2 = pScrn->displayWidth;
AvailFBArea.y2 = lines;
xf86InitFBManager(pScreen, &AvailFBArea);
xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Using %i scanlines of offscreen memory \n",
lines - pScrn->virtualY);
}
/* Setup the acceleration primitives */
if (!nPtr->noAccel && nPtr->NeoMMIOBase) {
Bool ret = FALSE;
if (nAcl->cacheStart >= nAcl->cacheEnd) {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"Too little space for pixmap cache.\n");
}
switch(nPtr->NeoChipset) {
case NM2070 :
ret = Neo2070AccelInit(pScreen);
break;
case NM2090 :
case NM2093 :
ret = Neo2090AccelInit(pScreen);
break;
case NM2097 :
case NM2160 :
ret = Neo2097AccelInit(pScreen);
break;
case NM2200 :
case NM2230 :
case NM2360 :
case NM2380 :
ret = Neo2200AccelInit(pScreen);
break;
}
xf86DrvMsg(pScrn->scrnIndex,X_INFO,
"Acceleration %s Initialized\n",ret ? "" : "not");
}
xf86SetBackingStore(pScreen);
xf86SetSilkenMouse(pScreen);
/* Initialise cursor functions */
miDCInitialize (pScreen, xf86GetPointerScreenFuncs());
if (nAcl->CursorAddress != -1) {
/* HW cursor functions */
if (!NeoCursorInit(pScreen)) {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"Hardware cursor initialization failed\n");
return FALSE;
}
nAcl->UseHWCursor = TRUE;
nPtr->NeoHWCursorInitialized = TRUE;
} else
nAcl->UseHWCursor = FALSE;
if (nPtr->shadowFB) {
nPtr->refreshArea = neoRefreshArea;
if(nPtr->rotate) {
if (!nPtr->PointerMoved) {
nPtr->PointerMoved = pScrn->PointerMoved;
pScrn->PointerMoved = neoPointerMoved;
}
switch(pScrn->bitsPerPixel) {
case 8: nPtr->refreshArea = neoRefreshArea8; break;
case 16: nPtr->refreshArea = neoRefreshArea16; break;
case 24: nPtr->refreshArea = neoRefreshArea24; break;
case 32: nPtr->refreshArea = neoRefreshArea32; break;
}
}
#if 0
ShadowFBInit(pScreen, nPtr->refreshArea);
#else
NEOShadowInit (pScreen);
#endif
}
/* Initialise default colourmap */
if(!miCreateDefColormap(pScreen))
return FALSE;
if (!xf86HandleColormaps(pScreen, 256, pScrn->rgbBits,
NEOLoadPalette, NULL,
CMAP_PALETTED_TRUECOLOR | CMAP_RELOAD_ON_MODE_SWITCH))
return FALSE;
#ifndef XSERVER_LIBPCIACCESS
racflag |= RAC_COLORMAP;
if (nPtr->NeoHWCursorInitialized)
racflag |= RAC_CURSOR;
pScrn->racIoFlags = pScrn->racMemFlags = racflag;
#endif
NEOInitVideo(pScreen);
pScreen->SaveScreen = NEOSaveScreen;
/* Setup DPMS mode */
if (nPtr->NeoChipset != NM2070)
xf86DPMSInit(pScreen, (DPMSSetProcPtr)NeoDisplayPowerManagementSet,
0);
pScrn->memPhysBase = (unsigned long)nPtr->NeoLinearAddr;
pScrn->fbOffset = 0;
/* Wrap the current CloseScreen function */
nPtr->CloseScreen = pScreen->CloseScreen;
pScreen->CloseScreen = NEOCloseScreen;
/* Report any unused options (only for the first generation) */
if (serverGeneration == 1) {
xf86ShowUnusedOptions(pScrn->scrnIndex, pScrn->options);
}
return TRUE;
}
/* Mandatory */
Bool
NEOSwitchMode(SWITCH_MODE_ARGS_DECL)
{
SCRN_INFO_PTR(arg);
return neoModeInit(pScrn, mode);
}
/* Mandatory */
void
NEOAdjustFrame(ADJUST_FRAME_ARGS_DECL)
{
SCRN_INFO_PTR(arg);
NEOPtr nPtr;
vgaHWPtr hwp;
int oldExtCRTDispAddr;
int Base;
hwp = VGAHWPTR(pScrn);
nPtr = NEOPTR(pScrn);
if (nPtr->showcache && y) {
int lastline = nPtr->NeoFbMapSize /
((pScrn->displayWidth * pScrn->bitsPerPixel) / 8);
lastline -= pScrn->currentMode->VDisplay;
y += pScrn->virtualY - 1;
if (y > lastline) y = lastline;
}
Base = (y * pScrn->displayWidth + x) >> 2;
/* Scale Base by the number of bytes per pixel. */
switch (pScrn->depth) {
case 8 :
break;
case 15 :
case 16 :
Base *= 2;
break;
case 24 :
Base *= 3;
break;
default :
break;
}
/*
* These are the generic starting address registers.
*/
VGAwCR(0x0C, (Base & 0x00FF00) >> 8);
VGAwCR(0x0D, (Base & 0x00FF));
/*
* Make sure we don't clobber some other bits that might already
* have been set. NOTE: NM2200 has a writable bit 3, but it shouldn't
* be needed.
*/
oldExtCRTDispAddr = VGArGR(0x0E);
VGAwGR(0x0E,(((Base >> 16) & 0x07) | (oldExtCRTDispAddr & 0xf8)));
#if 0
/*
* This is a workaround for a higher level bug that causes the cursor
* to be at the wrong position after a virtual screen resolution change
*/
if (nPtr->NeoHWCursorInitialized) { /*§§§ do we still need this?*/
NeoRepositionCursor();
}
#endif
}
/* Mandatory */
static Bool
NEOCloseScreen(CLOSE_SCREEN_ARGS_DECL)
{
ScrnInfoPtr pScrn = xf86ScreenToScrn(pScreen);
NEOPtr nPtr = NEOPTR(pScrn);
if(pScrn->vtSema){
if (nPtr->NeoHWCursorShown)
NeoHideCursor(pScrn);
neoRestore(pScrn, &(VGAHWPTR(pScrn))->SavedReg, &nPtr->NeoSavedReg, TRUE);
neoLock(pScrn);
neoUnmapMem(pScrn);
}
#ifdef HAVE_XAA_H
if (nPtr->AccelInfoRec)
XAADestroyInfoRec(nPtr->AccelInfoRec);
#endif
if (nPtr->CursorInfo)
xf86DestroyCursorInfoRec(nPtr->CursorInfo);
if (nPtr->ShadowPtr)
free(nPtr->ShadowPtr);
pScrn->vtSema = FALSE;
pScreen->CloseScreen = nPtr->CloseScreen;
return (*pScreen->CloseScreen)(CLOSE_SCREEN_ARGS);
}
/* Optional */
static void
NEOFreeScreen(FREE_SCREEN_ARGS_DECL)
{
SCRN_INFO_PTR(arg);
if (xf86LoaderCheckSymbol("vgaHWFreeHWRec"))
vgaHWFreeHWRec(pScrn);
NEOFreeRec(pScrn);
}
/* Optional */
static ModeStatus
NEOValidMode(SCRN_ARG_TYPE arg, DisplayModePtr mode, Bool verbose, int flags)
{
SCRN_INFO_PTR(arg);
NEOPtr nPtr = NEOPTR(pScrn);
int vDisplay = mode->VDisplay * ((mode->Flags & V_DBLSCAN) ? 2 : 1);
/*
* Is there any LineCompare Bit 10? Where?
* The 9 well known VGA bits give us a maximum height of 1024
*/
if (vDisplay > 1024)
return MODE_BAD;
/*
* Limit the modes to just those allowed by the various NeoMagic
* chips.
*/
if (nPtr->overrideValidate) {
xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "display mode validation disabled\n");
} else {
/*
* When the LCD is active, only allow modes that are (1) equal to
* or smaller than the size of the panel and (2) are one of the
* following sizes: 1024x768, 800x600, 640x480.
*/
if (nPtr->internDisp || !nPtr->externDisp) {
/* Is the mode larger than the LCD panel? */
if ((mode->HDisplay > nPtr->NeoPanelWidth) ||
(vDisplay > nPtr->NeoPanelHeight)) {
xf86DrvMsg(pScrn->scrnIndex,X_INFO, "Removing mode (%dx%d) "
"larger than the LCD panel (%dx%d)\n",
mode->HDisplay,
mode->VDisplay,
nPtr->NeoPanelWidth,
nPtr->NeoPanelHeight);
return(MODE_BAD);
}
/* Is the mode one of the acceptable sizes? */
switch (mode->HDisplay) {
case 1280:
if (mode->VDisplay == 1024)
return(MODE_OK);
break;
case 1024 :
if (mode->VDisplay == 768)
return(MODE_OK);
if ((mode->VDisplay == 480) && (nPtr->NeoPanelHeight == 480))
return(MODE_OK);
break;
case 800 :
if (mode->VDisplay == 600)
return(MODE_OK);
if ((mode->VDisplay == 480) && (nPtr->NeoPanelHeight == 480))
return(MODE_OK);
break;
case 640 :
if (mode->VDisplay == 480)
return(MODE_OK);
break;
#if 1
case 320:
if (mode->VDisplay == 240)
return(MODE_OK);
break;
#endif
default:
break;
}
xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Removing mode (%dx%d) that won't "
"display properly on LCD\n",
mode->HDisplay,
mode->VDisplay);
return(MODE_BAD);
}
}
return(MODE_OK);
}
static void
neoLock(ScrnInfoPtr pScrn)
{
vgaHWPtr hwp = VGAHWPTR(pScrn);
VGAwGR(0x09,0x00);
vgaHWLock(hwp);
}
static void
neoUnlock(ScrnInfoPtr pScrn)
{
vgaHWPtr hwp = VGAHWPTR(pScrn);
vgaHWUnlock(hwp);
VGAwGR(0x09,0x26);
}
static Bool
neoMapMem(ScrnInfoPtr pScrn)
{
NEOPtr nPtr = NEOPTR(pScrn);
vgaHWPtr hwp = VGAHWPTR(pScrn);
if (!nPtr->noMMIO) {
if (nPtr->pEnt->location.type == BUS_PCI){
#ifndef XSERVER_LIBPCIACCESS
nPtr->NeoMMIOBase =
xf86MapPciMem(pScrn->scrnIndex, VIDMEM_MMIO,
nPtr->PciTag, nPtr->NeoMMIOAddr,
0x200000L);
if (nPtr->NeoMMIOAddr2 != 0){
nPtr->NeoMMIOBase2 =
xf86MapPciMem(pScrn->scrnIndex, VIDMEM_MMIO,
nPtr->PciTag, nPtr->NeoMMIOAddr2,
0x100000L);
}
#else
void** result = (void**)&nPtr->NeoMMIOBase;
int err = pci_device_map_range(nPtr->PciInfo,
nPtr->NeoMMIOAddr,
0x200000L,
PCI_DEV_MAP_FLAG_WRITABLE,
result);
if (err)
return FALSE;
if (nPtr->NeoMMIOAddr2 != 0){
result = (void**)&nPtr->NeoMMIOBase2;
err = pci_device_map_range(nPtr->PciInfo,
nPtr->NeoMMIOAddr2,
0x100000L,
PCI_DEV_MAP_FLAG_WRITABLE,
result);
if (err)
return FALSE;
}
#endif
} else
#ifdef VIDMEM_MMIO
nPtr->NeoMMIOBase =
xf86MapVidMem(pScrn->scrnIndex,
VIDMEM_MMIO, nPtr->NeoMMIOAddr,
0x200000L);
#endif
if (nPtr->NeoMMIOBase == NULL)
return FALSE;
}
if (nPtr->pEnt->location.type == BUS_PCI)
#ifndef XSERVER_LIBPCIACCESS
nPtr->NeoFbBase =
xf86MapPciMem(pScrn->scrnIndex, VIDMEM_FRAMEBUFFER,
nPtr->PciTag,
(unsigned long)nPtr->NeoLinearAddr,
nPtr->NeoFbMapSize);
#else
{
void** result = (void**)&nPtr->NeoFbBase;
int err = pci_device_map_range(nPtr->PciInfo,
nPtr->NeoLinearAddr,
nPtr->NeoFbMapSize,
PCI_DEV_MAP_FLAG_WRITABLE |
PCI_DEV_MAP_FLAG_WRITE_COMBINE,
result);
if (err)
return FALSE;
}
#endif
else
#ifdef VIDMEM_FRAMEBUFFER
nPtr->NeoFbBase =
xf86MapVidMem(pScrn->scrnIndex, VIDMEM_FRAMEBUFFER,
(unsigned long)nPtr->NeoLinearAddr,
nPtr->NeoFbMapSize);
#endif
if (nPtr->NeoFbBase == NULL)
return FALSE;
return TRUE;
}
/*
* Unmap the framebuffer and MMIO memory.
*/
static Bool
neoUnmapMem(ScrnInfoPtr pScrn)
{
NEOPtr nPtr = NEOPTR(pScrn);
#ifndef XSERVER_LIBPCIACCESS
if (nPtr->NeoMMIOBase)
xf86UnMapVidMem(pScrn->scrnIndex, (pointer)nPtr->NeoMMIOBase,
0x200000L);
#else
if (nPtr->NeoMMIOBase)
pci_device_unmap_range(nPtr->PciInfo, (pointer)nPtr->NeoMMIOBase, 0x200000L);
#endif
nPtr->NeoMMIOBase = NULL;
#ifndef XSERVER_LIBPCIACCESS
if (nPtr->NeoMMIOBase2)
xf86UnMapVidMem(pScrn->scrnIndex, (pointer)nPtr->NeoMMIOBase2,
0x100000L);
#else
if (nPtr->NeoMMIOBase2)
pci_device_unmap_range(nPtr->PciInfo, (pointer)nPtr->NeoMMIOBase2, 0x100000L);
#endif
nPtr->NeoMMIOBase2 = NULL;
#ifndef XSERVER_LIBPCIACCESS
xf86UnMapVidMem(pScrn->scrnIndex, (pointer)nPtr->NeoFbBase,
nPtr->NeoFbMapSize);
#else
pci_device_unmap_range(nPtr->PciInfo, (pointer)nPtr->NeoFbBase, nPtr->NeoFbMapSize);
#endif
nPtr->NeoFbBase = NULL;
return TRUE;
}
static void
neoSave(ScrnInfoPtr pScrn)
{
vgaRegPtr VgaSave = &VGAHWPTR(pScrn)->SavedReg;
vgaHWPtr hwp = VGAHWPTR(pScrn);
NEOPtr nPtr = NEOPTR(pScrn);
NeoRegPtr save;
int i;
save = &nPtr->NeoSavedReg;
VGAwGR(0x09,0x26);
/*
* Whatever code is needed to get back to bank zero goes here.
*/
VGAwGR(0x15,0x00);
/* get generic registers */
vgaHWSave(pScrn, VgaSave, VGA_SR_ALL);
/*
* The port I/O code necessary to read in the extended registers
* into the fields of the vgaNeoRec structure goes here.
*/
save->GeneralLockReg = VGArGR(0x0A);
save->ExtCRTDispAddr = VGArGR(0x0E);
if (nPtr->NeoChipset != NM2070) {
save->ExtCRTOffset = VGArGR(0x0F);
}
save->SysIfaceCntl1 = VGArGR(0x10);
save->SysIfaceCntl2 = VGArGR(0x11);
save->SingleAddrPage = VGArGR(0x15);
save->DualAddrPage = VGArGR(0x16);
save->PanelDispCntlReg1 = VGArGR(0x20);
save->PanelDispCntlReg2 = VGArGR(0x25);
save->PanelDispCntlReg3 = VGArGR(0x30);
save->PanelVertCenterReg1 = VGArGR(0x28);
save->PanelVertCenterReg2 = VGArGR(0x29);
save->PanelVertCenterReg3 = VGArGR(0x2A);
if (nPtr->NeoChipset != NM2070) {
save->PanelVertCenterReg4 = VGArGR(0x32);
save->PanelHorizCenterReg1 = VGArGR(0x33);
save->PanelHorizCenterReg2 = VGArGR(0x34);
save->PanelHorizCenterReg3 = VGArGR(0x35);
}
if (nPtr->NeoChipset == NM2160) {
save->PanelHorizCenterReg4 = VGArGR(0x36);
}
if (nPtr->NeoChipset == NM2200 || nPtr->NeoChipset == NM2230
|| nPtr->NeoChipset == NM2360 || nPtr->NeoChipset == NM2380) {
save->PanelHorizCenterReg4 = VGArGR(0x36);
save->PanelVertCenterReg5 = VGArGR(0x37);
save->PanelHorizCenterReg5 = VGArGR(0x38);
}
save->ExtColorModeSelect = VGArGR(0x90);
save->VCLK3NumeratorLow = VGArGR(0x9B);
if (nPtr->NeoChipset == NM2200 || nPtr->NeoChipset == NM2230
|| nPtr->NeoChipset == NM2360 || nPtr->NeoChipset == NM2380)
save->VCLK3NumeratorHigh = VGArGR(0x8F);
save->VCLK3Denominator = VGArGR(0x9F);
save->ProgramVCLK = TRUE;
if (save->reg == NULL)
save->reg = (regSavePtr)xnfcalloc(sizeof(regSaveRec), 1);
else
xf86DrvMsg(pScrn->scrnIndex, X_WARNING,
"Non-NULL reg in NeoSave: reg=%p\n", (void *)save->reg);
save->reg->CR[0x23] = VGArCR(0x23);
save->reg->CR[0x25] = VGArCR(0x25);
save->reg->CR[0x2F] = VGArCR(0x2F);
for (i = 0x40; i <= 0x59; i++) {
save->reg->CR[i] = VGArCR(i);
}
for (i = 0x60; i <= 0x69; i++) {
save->reg->CR[i] = VGArCR(i);
}
for (i = 0x70; i <= NEO_EXT_CR_MAX; i++) {
save->reg->CR[i] = VGArCR(i);
}
for (i = 0x0A; i <= NEO_EXT_GR_MAX; i++) {
save->reg->GR[i] = VGArGR(i);
}
}
/*
* neoProgramShadowRegs
*
* Setup the shadow registers to their default values. The NeoSave
* routines will restore the proper values on server exit.
*/
static void
neoProgramShadowRegs(ScrnInfoPtr pScrn, vgaRegPtr VgaReg, NeoRegPtr restore)
{
int i;
Bool noProgramShadowRegs;
vgaHWPtr hwp = VGAHWPTR(pScrn);
NEOPtr nPtr = NEOPTR(pScrn);
Bool prog_lcd;
/*
* If display is external only and we want internal
* we need to program the shadow registers.
*/
prog_lcd = (((VGArGR(0x20) & 0x3) == 0x1) && nPtr->internDisp);
/*
* Convoluted logic for shadow register programming.
*
* As far as we know, shadow programming is needed for the 2070,
* but not in stretched modes. Special case this code.
*/
switch (nPtr->NeoChipset) {
case NM2070:
/* Program the shadow regs by default */
noProgramShadowRegs = FALSE;
if (!nPtr->progLcdRegs && !prog_lcd)
noProgramShadowRegs = TRUE;
if (restore->PanelDispCntlReg2 & 0x84) {
/* Don't program by default if in stretch mode */
noProgramShadowRegs = TRUE;
if (nPtr->progLcdStretch)
noProgramShadowRegs = FALSE;
}
break;
case NM2090:
case NM2093:
case NM2097:
case NM2160:
case NM2200:
case NM2230:
case NM2360:
case NM2380:
default:
/* Don't program the shadow regs by default */
noProgramShadowRegs = TRUE;
if (nPtr->progLcdRegs || prog_lcd)
noProgramShadowRegs = FALSE;
if (restore->PanelDispCntlReg2 & 0x84) {
/* Only change the behavior if an option is set */
if (nPtr->progLcdStretchOpt)
noProgramShadowRegs = !nPtr->progLcdStretch;
}
break;
}
if (noProgramShadowRegs) {
xf86DrvMsgVerb(pScrn->scrnIndex,X_INFO,5,"Not programming shadow registers\n");
if (nPtr->NeoSavedReg.reg){
for (i = 0x40; i <= 0x59; i++) {
VGAwCR(i, nPtr->NeoSavedReg.reg->CR[i]);
}
for (i = 0x60; i <= 0x64; i++) {
VGAwCR(i, nPtr->NeoSavedReg.reg->CR[i]);
}
}
} else {
/*
* Program the shadow regs based on the panel width. This works
* fine for normal sized panels, but what about the odd ones like
* the Libretto 100 which has an 800x480 panel???
*/
switch (nPtr->NeoPanelWidth) {
case 640 :
VGAwCR(0x40,0x5F);
VGAwCR(0x41,0x50);
VGAwCR(0x42,0x02);
VGAwCR(0x43,0x55);
VGAwCR(0x44,0x81);
VGAwCR(0x45,0x0B);
VGAwCR(0x46,0x2E);
VGAwCR(0x47,0xEA);
VGAwCR(0x48,0x0C);
VGAwCR(0x49,0xE7);
VGAwCR(0x4A,0x04);
VGAwCR(0x4B,0x2D);
VGAwCR(0x4C,0x28);
VGAwCR(0x4D,0x90);
VGAwCR(0x4E,0x2B);
VGAwCR(0x4F,0xA0);
break;
case 800 :
switch (nPtr->NeoPanelHeight) {
case 600:
VGAwCR(0x40,0x7F);
VGAwCR(0x41,0x63);
VGAwCR(0x42,0x02);
VGAwCR(0x43,0x6C);
VGAwCR(0x44,0x1C);
VGAwCR(0x45,0x72);
VGAwCR(0x46,0xE0);
VGAwCR(0x47,0x58);
VGAwCR(0x48,0x0C);
VGAwCR(0x49,0x57);
VGAwCR(0x4A,0x73);
VGAwCR(0x4B,0x3D);
VGAwCR(0x4C,0x31);
VGAwCR(0x4D,0x01);
VGAwCR(0x4E,0x36);
VGAwCR(0x4F,0x1E);
if (nPtr->NeoChipset != NM2070) {
VGAwCR(0x50,0x6B);
VGAwCR(0x51,0x4F);
VGAwCR(0x52,0x0E);
VGAwCR(0x53,0x58);
VGAwCR(0x54,0x88);
VGAwCR(0x55,0x33);
VGAwCR(0x56,0x27);
VGAwCR(0x57,0x16);
VGAwCR(0x58,0x2C);
VGAwCR(0x59,0x94);
}
break;
case 480:
VGAwCR(0x40,0x7F);
VGAwCR(0x41,0x63);
VGAwCR(0x42,0x02);
VGAwCR(0x43,0x6B);
VGAwCR(0x44,0x1B);
VGAwCR(0x45,0x72);
VGAwCR(0x46,0xE0);
VGAwCR(0x47,0x1C);
VGAwCR(0x48,0x00);
VGAwCR(0x49,0x57);
VGAwCR(0x4A,0x73);
VGAwCR(0x4B,0x3E);
VGAwCR(0x4C,0x31);
VGAwCR(0x4D,0x01);
VGAwCR(0x4E,0x36);
VGAwCR(0x4F,0x1E);
VGAwCR(0x50,0x6B);
VGAwCR(0x51,0x4F);
VGAwCR(0x52,0x0E);
VGAwCR(0x53,0x57);
VGAwCR(0x54,0x87);
VGAwCR(0x55,0x33);
VGAwCR(0x56,0x27);
VGAwCR(0x57,0x16);
VGAwCR(0x58,0x2C);
VGAwCR(0x59,0x94);
break;
break;
/* Not done */
}
break;
case 1024 :
switch (nPtr->NeoPanelHeight) {
case 768:
VGAwCR(0x40,0xA3);
VGAwCR(0x41,0x7F);
VGAwCR(0x42,0x06);
VGAwCR(0x43,0x85);
VGAwCR(0x44,0x96);
VGAwCR(0x45,0x24);
VGAwCR(0x46,0xE5);
VGAwCR(0x47,0x02);
VGAwCR(0x48,0x08);
VGAwCR(0x49,0xFF);
VGAwCR(0x4A,0x25);
VGAwCR(0x4B,0x4F);
VGAwCR(0x4C,0x40);
VGAwCR(0x4D,0x00);
VGAwCR(0x4E,0x44);
VGAwCR(0x4F,0x0C);
VGAwCR(0x50,0x7A);
VGAwCR(0x51,0x56);
VGAwCR(0x52,0x00);
VGAwCR(0x53,0x5D);
VGAwCR(0x54,0x0E);
VGAwCR(0x55,0x3B);
VGAwCR(0x56,0x2B);
VGAwCR(0x57,0x00);
VGAwCR(0x58,0x2F);
VGAwCR(0x59,0x18);
VGAwCR(0x60,0x88);
VGAwCR(0x61,0x63);
VGAwCR(0x62,0x0B);
VGAwCR(0x63,0x69);
VGAwCR(0x64,0x1A);
break;
case 480:
VGAwCR(0x40,0xA3);
VGAwCR(0x41,0x7F);
VGAwCR(0x42,0x1B);
VGAwCR(0x43,0x89);
VGAwCR(0x44,0x16);
VGAwCR(0x45,0x0B);
VGAwCR(0x46,0x2C);
VGAwCR(0x47,0xE8);
VGAwCR(0x48,0x0C);
VGAwCR(0x49,0xE7);
VGAwCR(0x4A,0x09);
VGAwCR(0x4B,0x4F);
VGAwCR(0x4C,0x40);
VGAwCR(0x4D,0x00);
VGAwCR(0x4E,0x44);
VGAwCR(0x4F,0x0C);
VGAwCR(0x50,0x7A);
VGAwCR(0x51,0x56);
VGAwCR(0x52,0x00);
VGAwCR(0x53,0x5D);
VGAwCR(0x54,0x0E);
VGAwCR(0x55,0x3B);
VGAwCR(0x56,0x2A);
VGAwCR(0x57,0x00);
VGAwCR(0x58,0x2F);
VGAwCR(0x59,0x18);
VGAwCR(0x60,0x88);
VGAwCR(0x61,0x63);
VGAwCR(0x62,0x0B);
VGAwCR(0x63,0x69);
VGAwCR(0x64,0x1A);
break;
}
break;
case 1280:
#ifdef NOT_DONE
VGAwCR(0x40,0x?? );
.
.
.
VGAwCR(0x64,0x?? );
break;
#else
/* Probe should prevent this case for now */
FatalError("1280 panel support incomplete\n");
#endif
}
}
}
static void
neoRestore(ScrnInfoPtr pScrn, vgaRegPtr VgaReg, NeoRegPtr restore,
Bool restoreText)
{
NEOPtr nPtr = NEOPTR(pScrn);
vgaHWPtr hwp = VGAHWPTR(pScrn);
unsigned char temp;
int i;
Bool clock_hi = FALSE;
vgaHWProtect(pScrn,TRUE); /* Blank the screen */
VGAwGR(0x09,0x26);
/* Init the shadow registers if necessary */
neoProgramShadowRegs(pScrn, VgaReg, restore);
VGAwGR(0x15,0x00);
VGAwGR(0x0A,restore->GeneralLockReg);
/*
* The color mode needs to be set before calling vgaHWRestore
* to ensure the DAC is initialized properly.
*
* NOTE: Make sure we don't change bits make sure we don't change
* any reserved bits.
*/
temp = VGArGR(0x90);
switch (nPtr->NeoChipset) {
case NM2070 :
temp &= 0xF0; /* Save bits 7:4 */
temp |= (restore->ExtColorModeSelect & ~0xF0);
break;
case NM2090 :
case NM2093 :
case NM2097 :
case NM2160 :
case NM2200 :
case NM2230 :
case NM2360 :
case NM2380 :
temp &= 0x70; /* Save bits 6:4 */
temp |= (restore->ExtColorModeSelect & ~0x70);
break;
}
VGAwGR(0x90,temp);
/*
* In some rare cases a lockup might occur if we don't delay
* here. (Reported by Miles Lane)
*/
usleep(200000);
/*
* Disable horizontal and vertical graphics and text expansions so
* that vgaHWRestore works properly.
*/
temp = VGArGR(0x25);
temp &= 0x39;
VGAwGR(0x25, temp);
/*
* Sleep for 200ms to make sure that the two operations above have
* had time to take effect.
*/
usleep(200000);
/*
* This function handles restoring the generic VGA registers. */
vgaHWRestore(pScrn, VgaReg,
VGA_SR_MODE
| (restoreText ? (VGA_SR_FONTS | VGA_SR_CMAP) : 0));
VGAwGR(0x0E, restore->ExtCRTDispAddr);
VGAwGR(0x0F, restore->ExtCRTOffset);
temp = VGArGR(0x10);
temp &= 0x0F; /* Save bits 3:0 */
temp |= (restore->SysIfaceCntl1 & ~0x0F);
VGAwGR(0x10, temp);
VGAwGR(0x11, restore->SysIfaceCntl2);
VGAwGR(0x15, restore->SingleAddrPage);
VGAwGR(0x16, restore->DualAddrPage);
temp = VGArGR(0x20);
switch (nPtr->NeoChipset) {
case NM2070 :
temp &= 0xFC; /* Save bits 7:2 */
temp |= (restore->PanelDispCntlReg1 & ~0xFC);
break;
case NM2090 :
case NM2093 :
case NM2097 :
case NM2160 :
temp &= 0xDC; /* Save bits 7:6,4:2 */
temp |= (restore->PanelDispCntlReg1 & ~0xDC);
break;
case NM2200 :
case NM2230 :
case NM2360 :
case NM2380 :
temp &= 0x98; /* Save bits 7,4:3 */
temp |= (restore->PanelDispCntlReg1 & ~0x98);
break;
}
VGAwGR(0x20, temp);
temp = VGArGR(0x25);
temp &= 0x38; /* Save bits 5:3 */
temp |= (restore->PanelDispCntlReg2 & ~0x38);
VGAwGR(0x25, temp);
if (nPtr->NeoChipset != NM2070) {
temp = VGArGR(0x30);
temp &= 0xEF; /* Save bits 7:5 and bits 3:0 */
temp |= (restore->PanelDispCntlReg3 & ~0xEF);
VGAwGR(0x30, temp);
}
VGAwGR(0x28, restore->PanelVertCenterReg1);
VGAwGR(0x29, restore->PanelVertCenterReg2);
VGAwGR(0x2a, restore->PanelVertCenterReg3);
if (nPtr->NeoChipset != NM2070) {
VGAwGR(0x32, restore->PanelVertCenterReg4);
VGAwGR(0x33, restore->PanelHorizCenterReg1);
VGAwGR(0x34, restore->PanelHorizCenterReg2);
VGAwGR(0x35, restore->PanelHorizCenterReg3);
}
if (nPtr->NeoChipset == NM2160) {
VGAwGR(0x36, restore->PanelHorizCenterReg4);
}
if (nPtr->NeoChipset == NM2200 || nPtr->NeoChipset == NM2230
|| nPtr->NeoChipset == NM2360 || nPtr->NeoChipset == NM2380) {
VGAwGR(0x36, restore->PanelHorizCenterReg4);
VGAwGR(0x37, restore->PanelVertCenterReg5);
VGAwGR(0x38, restore->PanelHorizCenterReg5);
}
if (nPtr->NeoChipset == NM2200 || nPtr->NeoChipset == NM2230
|| nPtr->NeoChipset == NM2360 || nPtr->NeoChipset == NM2380)
clock_hi = TRUE;
/* Program VCLK3 if needed. */
if (restore->ProgramVCLK
&& ((VGArGR(0x9B) != restore->VCLK3NumeratorLow)
|| (VGArGR(0x9F) != restore->VCLK3Denominator)
|| (clock_hi && ((VGArGR(0x8F) & ~0x0f)
!= (restore->VCLK3NumeratorHigh & ~0x0F))))) {
VGAwGR(0x9B, restore->VCLK3NumeratorLow);
if (clock_hi) {
temp = VGArGR(0x8F);
temp &= 0x0F; /* Save bits 3:0 */
temp |= (restore->VCLK3NumeratorHigh & ~0x0F);
VGAwGR(0x8F, temp);
}
VGAwGR(0x9F, restore->VCLK3Denominator);
}
if (restore->biosMode)
VGAwCR(0x23,restore->biosMode);
if (restore->reg) {
VGAwCR(0x23,restore->reg->CR[0x23]);
VGAwCR(0x25,restore->reg->CR[0x25]);
VGAwCR(0x2F,restore->reg->CR[0x2F]);
for (i = 0x40; i <= 0x59; i++) {
VGAwCR(i, restore->reg->CR[i]);
}
for (i = 0x60; i <= 0x69; i++) {
VGAwCR(i, restore->reg->CR[i]);
}
for (i = 0x70; i <= NEO_EXT_CR_MAX; i++) {
VGAwCR(i, restore->reg->CR[i]);
}
for (i = 0x0a; i <= 0x3f; i++) {
VGAwGR(i, restore->reg->GR[i]);
}
for (i = 0x90; i <= NEO_EXT_GR_MAX; i++) {
VGAwGR(i, restore->reg->GR[i]);
}
}
VGAwGR (0x93, 0xc0); /* Gives faster framebuffer writes */
/* Program vertical extension register */
if (nPtr->NeoChipset == NM2200 || nPtr->NeoChipset == NM2230
|| nPtr->NeoChipset == NM2360 || nPtr->NeoChipset == NM2380) {
VGAwCR(0x70, restore->VerticalExt);
}
vgaHWProtect(pScrn, FALSE); /* Turn on screen */
}
static Bool
neoModeInit(ScrnInfoPtr pScrn, DisplayModePtr mode)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
int hoffset, voffset;
vgaHWPtr hwp = VGAHWPTR(pScrn);
NeoRegPtr NeoNew = &nPtr->NeoModeReg;
vgaRegPtr NeoStd = &hwp->ModeReg;
Bool noLcdStretch = nPtr->noLcdStretch;
int clockMul = 1;
neoUnlock(pScrn);
/*
* This will allocate the datastructure and initialize all of the
* generic VGA registers.
*/
if (!vgaHWInit(pScrn, mode))
return(FALSE);
/*
* Several registers need to be corrected from the default values
* assigned by vgaHWinit().
*/
pScrn->vtSema = TRUE;
/*
* The default value assigned by vgaHW.c is 0x41, but this does
* not work for NeoMagic.
*/
NeoStd->Attribute[16] = 0x01;
switch (pScrn->depth) {
case 8 :
NeoStd->CRTC[0x13] = pScrn->displayWidth >> 3;
NeoNew->ExtCRTOffset = pScrn->displayWidth >> 11;
NeoNew->ExtColorModeSelect = 0x11;
break;
case 15 :
NeoNew->ExtColorModeSelect = 0x12;
NeoStd->CRTC[0x13] = pScrn->displayWidth >> 2;
NeoNew->ExtCRTOffset = pScrn->displayWidth >> 10;
break;
case 16 :
NeoNew->ExtColorModeSelect = 0x13;
NeoStd->CRTC[0x13] = pScrn->displayWidth >> 2;
NeoNew->ExtCRTOffset = pScrn->displayWidth >> 10;
break;
case 24 :
NeoStd->CRTC[0x13] = (pScrn->displayWidth * 3) >> 3;
NeoNew->ExtCRTOffset = (pScrn->displayWidth * 3) >> 11;
NeoNew->ExtColorModeSelect = 0x14;
break;
default :
break;
}
NeoNew->ExtCRTDispAddr = 0x10;
/* Vertical Extension */
NeoNew->VerticalExt = (((mode->CrtcVTotal -2) & 0x400) >> 10 )
| (((mode->CrtcVDisplay -1) & 0x400) >> 9 )
| (((mode->CrtcVSyncStart) & 0x400) >> 8 )
| (((mode->CrtcVBlankStart - 1) & 0x400) >> 7 );
/* Fast write bursts on unless disabled. */
if (nPtr->onPciBurst) {
NeoNew->SysIfaceCntl1 = 0x30;
} else {
NeoNew->SysIfaceCntl1 = 0x00;
}
/* If they are used, enable linear addressing and/or enable MMIO. */
NeoNew->SysIfaceCntl2 = 0x00;
NeoNew->SysIfaceCntl2 |= 0x80;
if (!nPtr->noMMIO)
NeoNew->SysIfaceCntl2 |= 0x40;
/* Enable any user specified display devices. */
NeoNew->PanelDispCntlReg1 = 0x00;
if (nPtr->internDisp) {
NeoNew->PanelDispCntlReg1 |= 0x02;
}
if (nPtr->externDisp) {
NeoNew->PanelDispCntlReg1 |= 0x01;
}
#if 0
/*
* This was replaced: if no devices are specified take the
* probed settings. If the probed settings are bogus fallback
* to internal only.
*/
/* If the user did not specify any display devices, then... */
if (NeoNew->PanelDispCntlReg1 == 0x00) {
/* Default to internal (i.e., LCD) only. */
NeoNew->PanelDispCntlReg1 |= 0x02;
}
#endif
/* If we are using a fixed mode, then tell the chip we are. */
switch (mode->HDisplay) {
case 1280:
NeoNew->PanelDispCntlReg1 |= 0x60;
break;
case 1024:
NeoNew->PanelDispCntlReg1 |= 0x40;
break;
case 800:
NeoNew->PanelDispCntlReg1 |= 0x20;
break;
case 640:
default:
break;
}
/* Setup shadow register locking. */
switch (NeoNew->PanelDispCntlReg1 & 0x03) {
case 0x01 : /* External CRT only mode: */
NeoNew->GeneralLockReg = 0x00;
/* We need to program the VCLK for external display only mode. */
NeoNew->ProgramVCLK = TRUE;
break;
case 0x02 : /* Internal LCD only mode: */
case 0x03 : /* Simultaneous internal/external (LCD/CRT) mode: */
NeoNew->GeneralLockReg = 0x01;
/* Don't program the VCLK when using the LCD. */
NeoNew->ProgramVCLK = FALSE;
break;
}
/*
* If the screen is to be stretched, turn on stretching for the
* various modes.
*
* OPTION_LCD_STRETCH means stretching should be turned off!
*/
NeoNew->PanelDispCntlReg2 = 0x00;
NeoNew->PanelDispCntlReg3 = 0x00;
nAcl->NoCursorMode = FALSE;
if ((!noLcdStretch) &&
(NeoNew->PanelDispCntlReg1 & 0x02)) {
if (mode->HDisplay == nPtr->NeoPanelWidth) {
/*
* Don't disable the flag. It will be needed if another mode
* is selected.
*/
/*
* No stretching required when the requested display width
* equals the panel width.
*/
xf86DrvMsg(pScrn->scrnIndex,X_INFO,"Stretching disabled\n");
noLcdStretch = TRUE;
} else {
switch (mode->HDisplay) {
case 320 : /* Needs testing. KEM -- 24 May 98 */
case 400 : /* Needs testing. KEM -- 24 May 98 */
case 640 :
case 800 :
case 1024 :
NeoNew->PanelDispCntlReg2 |= 0xC6;
nAcl->NoCursorMode = TRUE;
break;
default :
/* No stretching in these modes. */
xf86DrvMsg(pScrn->scrnIndex,X_INFO,
"Stretching disabled not supported in this mode\n");
noLcdStretch = TRUE;
break;
}
}
} else if (mode->Flags & V_DBLSCAN) {
nAcl->NoCursorMode = TRUE;
}
/*
* If the screen is to be centerd, turn on the centering for the
* various modes.
*/
NeoNew->PanelVertCenterReg1 = 0x00;
NeoNew->PanelVertCenterReg2 = 0x00;
NeoNew->PanelVertCenterReg3 = 0x00;
NeoNew->PanelVertCenterReg4 = 0x00;
NeoNew->PanelVertCenterReg5 = 0x00;
NeoNew->PanelHorizCenterReg1 = 0x00;
NeoNew->PanelHorizCenterReg2 = 0x00;
NeoNew->PanelHorizCenterReg3 = 0x00;
NeoNew->PanelHorizCenterReg4 = 0x00;
NeoNew->PanelHorizCenterReg5 = 0x00;
if (nPtr->lcdCenter &&
(NeoNew->PanelDispCntlReg1 & 0x02)) {
Bool doCenter = FALSE;
hoffset = 0;
voffset = 0;
if (mode->HDisplay == nPtr->NeoPanelWidth) {
/*
* No centering required when the requested display width
* equals the panel width.
*/
} else {
NeoNew->PanelDispCntlReg3 |= 0x10;
if (noLcdStretch) {
/* Calculate the horizontal offsets. */
int HDisplay = mode->HDisplay
<< ((mode->VDisplay < 480) ? 1 : 0);
hoffset = ((nPtr->NeoPanelWidth - HDisplay) >> 4) - 1;
if (mode->VDisplay < 480)
hoffset >>= 1;
doCenter = TRUE;
} else {
/* Stretched modes cannot be centered. */
hoffset = 0;
}
}
if (mode->VDisplay == nPtr->NeoPanelHeight) {
/*
* No centering required when the requested display width
* equals the panel width.
*/
} else {
NeoNew->PanelDispCntlReg2 |= 0x01;
if (noLcdStretch) {
/* Calculate the vertical offsets. */
int VDisplay = mode->VDisplay
<< ((mode->Flags & V_DBLSCAN) ? 1 : 0);
voffset = ((nPtr->NeoPanelHeight - VDisplay) >> 1) - 2;
doCenter = TRUE;
} else {
/* Stretched modes cannot be centered. */
voffset = 0;
}
}
if (doCenter) {
switch (mode->HDisplay) {
case 320 : /* Needs testing. KEM -- 24 May 98 */
NeoNew->PanelHorizCenterReg3 = hoffset;
NeoNew->PanelVertCenterReg3 = voffset;
break;
case 400 : /* Needs testing. KEM -- 24 May 98 */
NeoNew->PanelHorizCenterReg4 = hoffset;
NeoNew->PanelVertCenterReg1 = voffset;
break;
case 640 :
NeoNew->PanelHorizCenterReg1 = hoffset;
NeoNew->PanelVertCenterReg3 = voffset;
break;
case 800 :
NeoNew->PanelHorizCenterReg2 = hoffset;
switch (mode->VDisplay) {
case 600:
NeoNew->PanelVertCenterReg4 = voffset;
break;
case 480:
/* Not sure if this is correct */
NeoNew->PanelVertCenterReg3 = voffset;
break;
}
break;
case 1024 :
NeoNew->PanelHorizCenterReg5 = hoffset;
NeoNew->PanelVertCenterReg5 = voffset;
break;
case 1280 :
default :
/* No centering in these modes. */
break;
}
}
}
if (!noLcdStretch &&
(NeoNew->PanelDispCntlReg1 & 0x02)) {
if (mode->HDisplay != nPtr->NeoPanelWidth)
nPtr->videoHZoom = (double)nPtr->NeoPanelWidth/mode->HDisplay;
if (mode->VDisplay != nPtr->NeoPanelHeight)
nPtr->videoVZoom = (double)nPtr->NeoPanelHeight/mode->VDisplay;
} else {
nPtr->videoHZoom = 1.0;
nPtr->videoVZoom = 1.0;
}
/* Do double scan */
if (mode->VDisplay < 480) {
NeoStd->Sequencer[1] |= 0x8;
clockMul = 2;
}
NeoNew->biosMode = neoFindMode(mode->HDisplay,mode->VDisplay,pScrn->depth);
/*
* New->reg should be empty. Just in
* case it isn't, warn us and clear it anyway.
*/
if (NeoNew->reg) {
xf86DrvMsg(pScrn->scrnIndex, X_WARNING,
"Non-NULL reg in NeoInit: reg=%p\n", (void *)NeoNew->reg);
free(NeoNew->reg);
NeoNew->reg = NULL;
}
/*
* Calculate the VCLK that most closely matches the requested dot
* clock.
*/
neoCalcVCLK(pScrn, mode->SynthClock*clockMul);
/* Since we program the clocks ourselves, always use VCLK3. */
NeoStd->MiscOutReg |= 0x0C;
neoRestore(pScrn, NeoStd, NeoNew, FALSE);
return(TRUE);
}
/*
* neoCalcVCLK --
*
* Determine the closest clock frequency to the one requested.
*/
#define REF_FREQ 14.31818
#define MAX_N 127
#define MAX_D 31
#define MAX_F 1
static void
neoCalcVCLK(ScrnInfoPtr pScrn, long freq)
{
NEOPtr nPtr = NEOPTR(pScrn);
int n, d, f;
double f_out;
double f_diff;
int n_best = 0, d_best = 1, f_best = 0;
double f_best_diff = 999999.0;
double f_target = freq/1000.0;
for (f = 0; f <= MAX_F; f++)
for (n = 0; n <= MAX_N; n++)
for (d = 1; d <= MAX_D; d++) {
f_out = (n+1.0)/((d+1.0)*(1<NeoChipset == NM2200 || nPtr->NeoChipset == NM2230
|| nPtr->NeoChipset == NM2360 || nPtr->NeoChipset == NM2380) {
/* NOT_DONE: We are trying the full range of the 2200 clock.
We should be able to try n up to 2047 */
nPtr->NeoModeReg.VCLK3NumeratorLow = n_best;
nPtr->NeoModeReg.VCLK3NumeratorHigh = (f_best << 7);
}
else {
nPtr->NeoModeReg.VCLK3NumeratorLow = n_best | (f_best << 7);
}
nPtr->NeoModeReg.VCLK3Denominator = d_best;
#ifdef DEBUG
ErrorF("neoVCLK: f:%f NumLow=%i NumHi=%i Den=%i Df=%f\n",
f_target,
nPtr->NeoModeReg.VCLK3NumeratorLow,
nPtr->NeoModeReg.VCLK3NumeratorHigh,
nPtr->NeoModeReg.VCLK3Denominator,
f_best_diff);
#endif
}
/*
* NeoDisplayPowerManagementSet --
*
* Sets VESA Display Power Management Signaling (DPMS) Mode.
*/
static void
NeoDisplayPowerManagementSet(ScrnInfoPtr pScrn, int PowerManagementMode,
int flags)
{
NEOPtr nPtr = NEOPTR(pScrn);
vgaHWPtr hwp = VGAHWPTR(pScrn);
unsigned char SEQ01 = 0;
unsigned char LogicPowerMgmt = 0;
unsigned char LCD_on = 0;
if (!pScrn->vtSema)
return;
switch (PowerManagementMode) {
case DPMSModeOn:
/* Screen: On; HSync: On, VSync: On */
SEQ01 = 0x00;
LogicPowerMgmt = 0x00;
if (nPtr->internDisp || ! nPtr->externDisp)
LCD_on = 0x02;
else
LCD_on = 0x00;
break;
case DPMSModeStandby:
/* Screen: Off; HSync: Off, VSync: On */
SEQ01 = 0x20;
LogicPowerMgmt = 0x10;
LCD_on = 0x00;
break;
case DPMSModeSuspend:
/* Screen: Off; HSync: On, VSync: Off */
SEQ01 = 0x20;
LogicPowerMgmt = 0x20;
LCD_on = 0x00;
break;
case DPMSModeOff:
/* Screen: Off; HSync: Off, VSync: Off */
SEQ01 = 0x20;
LogicPowerMgmt = 0x30;
LCD_on = 0x00;
break;
}
/* Turn the screen on/off */
SEQ01 |= VGArSR(0x01) & ~0x20;
VGAwSR(0x01, SEQ01);
/* Turn the LCD on/off */
LCD_on |= VGArGR(0x20) & ~0x02;
VGAwGR(0x20, LCD_on);
/* Set the DPMS mode */
LogicPowerMgmt |= 0x80;
LogicPowerMgmt |= VGArGR(0x01) & ~0xF0;
VGAwGR(0x01,LogicPowerMgmt);
}
static unsigned int
neo_ddc1Read(ScrnInfoPtr pScrn)
{
register vgaHWPtr hwp = VGAHWPTR(pScrn);
register unsigned int tmp;
/* This needs to be investigated: we may have to swap this around */
while (!(hwp->readST01(hwp)&0x8)) {};
while (hwp->readST01(hwp)&0x8) {};
tmp = (VGArGR(0xA1) & 0x08);
return (tmp);
}
static void
neo_ddc1SetSpeed(ScrnInfoPtr pScrn, xf86ddcSpeed speed)
{
vgaHWddc1SetSpeed(pScrn, speed);
}
static xf86MonPtr
neo_ddc1(ScrnInfoPtr pScrn)
{
vgaHWPtr hwp = VGAHWPTR(pScrn);
unsigned int reg1, reg2, reg3;
xf86MonPtr ret;
/* initialize chipset */
reg1 = VGArCR(0x21);
reg2 = VGArCR(0x1D);
reg3 = VGArCR(0xA1);
VGAwCR(0x21,0x00);
VGAwCR(0x1D,0x01); /* some Voodoo */
VGAwGR(0xA1,0x2F);
ret = xf86DoEDID_DDC1(XF86_SCRN_ARG(pScrn),neo_ddc1SetSpeed,neo_ddc1Read);
/* undo initialization */
VGAwCR(0x21,reg1);
VGAwCR(0x1D,reg2);
VGAwGR(0xA1,reg3);
return ret;
}
static Bool
neoDoDDC1(ScrnInfoPtr pScrn)
{
Bool ret = FALSE;
vgaHWPtr hwp = VGAHWPTR(pScrn);
VGAwGR(0x09,0x26);
ret = xf86SetDDCproperties(pScrn,
xf86PrintEDID(neo_ddc1(pScrn)));
VGAwGR(0x09,0x00);
return ret;
}
static Bool
neoDoDDC2(ScrnInfoPtr pScrn)
{
NEOPtr nPtr = NEOPTR(pScrn);
vgaHWPtr hwp = VGAHWPTR(pScrn);
Bool ret = FALSE;
VGAwGR(0x09,0x26);
if (xf86LoadSubModule(pScrn, "i2c")) {
if (neo_I2CInit(pScrn)) {
ret = xf86SetDDCproperties(pScrn,xf86PrintEDID(xf86DoEDID_DDC2(
XF86_SCRN_ARG(pScrn),nPtr->I2C)));
}
}
VGAwGR(0x09,0x00);
return ret;
}
static Bool
neoDoDDCVBE(ScrnInfoPtr pScrn)
{
NEOPtr nPtr = NEOPTR(pScrn);
vgaHWPtr hwp = VGAHWPTR(pScrn);
vbeInfoPtr pVbe;
Bool ret = FALSE;
VGAwGR(0x09,0x26);
if (xf86LoadSubModule(pScrn, "vbe")) {
if ((pVbe = VBEInit(NULL,nPtr->pEnt->index))) {
ret = xf86SetDDCproperties(
pScrn,xf86PrintEDID(vbeDoEDID(pVbe,NULL)));
vbeFree(pVbe);
}
}
VGAwGR(0x09,0x00);
return ret;
}
static int
neoFindMode(int xres, int yres, int depth)
{
int xres_s;
int i, size;
biosMode *mode;
switch (depth) {
case 8:
size = sizeof(bios8) / sizeof(biosMode);
mode = bios8;
break;
case 15:
size = sizeof(bios15) / sizeof(biosMode);
mode = bios15;
break;
case 16:
size = sizeof(bios16) / sizeof(biosMode);
mode = bios16;
break;
case 24:
size = sizeof(bios24) / sizeof(biosMode);
mode = bios24;
break;
default:
return 0;
}
for (i = 0; i < size; i++) {
if (xres <= mode[i].x_res) {
xres_s = mode[i].x_res;
for (; i < size; i++) {
if (mode[i].x_res != xres_s)
return mode[i-1].mode;
if (yres <= mode[i].y_res)
return mode[i].mode;
}
}
}
return mode[size - 1].mode;
}
static void
neoProbeDDC(ScrnInfoPtr pScrn, int index)
{
vbeInfoPtr pVbe;
if (xf86LoadSubModule(pScrn, "vbe")) {
if ((pVbe = VBEInit(NULL,index))) {
ConfiguredMonitor = vbeDoEDID(pVbe, NULL);
vbeFree(pVbe);
}
}
}
xf86-video-neomagic-1.2.9/src/neo_reg.h 0000644 0001750 0001750 00000011015 12216130746 014501 0000000 0000000 /**********************************************************************
Copyright 1998, 1999 by Precision Insight, Inc., Cedar Park, Texas.
All Rights Reserved
Permission to use, copy, modify, distribute, and sell this software and
its documentation for any purpose is hereby granted without fee,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of Precision Insight not be
used in advertising or publicity pertaining to distribution of the
software without specific, written prior permission. Precision Insight
and its suppliers make no representations about the suitability of this
software for any purpose. It is provided "as is" without express or
implied warranty.
PRECISION INSIGHT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
**********************************************************************/
/*
* The original Precision Insight driver for
* XFree86 v.3.3 has been sponsored by Red Hat.
*
* Authors:
* Jens Owen (jens@tungstengraphics.com)
* Kevin E. Martin (kevin@precisioninsight.com)
*
* Port to Xfree86 v.4.0
* 1998, 1999 by Egbert Eich (Egbert.Eich@Physik.TU-Darmstadt.DE)
*/
#define NEOREG_BLTSTAT 0x00
#define NEOREG_BLTCNTL 0x04
#define NEOREG_XPCOLOR 0x08
#define NEOREG_FGCOLOR 0x0c
#define NEOREG_BGCOLOR 0x10
#define NEOREG_PITCH 0x14
#define NEOREG_CLIPLT 0x18
#define NEOREG_CLIPRB 0x1c
#define NEOREG_SRCBITOFF 0x20
#define NEOREG_SRCSTARTOFF 0x24
#define NEOREG_DSTSTARTOFF 0x2c
#define NEOREG_XYEXT 0x30
#define NEOREG_PAGECNTL 0x80
#define NEOREG_PAGEBASE 0x84
#define NEOREG_POSTBASE 0x88
#define NEOREG_POSTPTR 0x8c
#define NEOREG_DATAPTR 0x90
#define NEOREG_BLTMODE 0x02
#define NEO_BS0_BLT_BUSY 0x00000001
#define NEO_BS0_FIFO_AVAIL 0x00000002
#define NEO_BS0_FIFO_PEND 0x00000004
#define NEO_BC0_DST_Y_DEC 0x00000001
#define NEO_BC0_X_DEC 0x00000002
#define NEO_BC0_SRC_TRANS 0x00000004
#define NEO_BC0_SRC_IS_FG 0x00000008
#define NEO_BC0_SRC_Y_DEC 0x00000010
#define NEO_BC0_FILL_PAT 0x00000020
#define NEO_BC0_SRC_MONO 0x00000040
#define NEO_BC0_SYS_TO_VID 0x00000080
#define NEO_BC1_DEPTH8 0x00000100
#define NEO_BC1_DEPTH16 0x00000200
#define NEO_BC1_X_320 0x00000400
#define NEO_BC1_X_640 0x00000800
#define NEO_BC1_X_800 0x00000c00
#define NEO_BC1_X_1024 0x00001000
#define NEO_BC1_X_1152 0x00001400
#define NEO_BC1_X_1280 0x00001800
#define NEO_BC1_X_1600 0x00001c00
#define NEO_BC1_DST_TRANS 0x00002000
#define NEO_BC1_MSTR_BLT 0x00004000
#define NEO_BC1_FILTER_Z 0x00008000
#define NEO_BC2_WR_TR_DST 0x00800000
#define NEO_BC3_SRC_XY_ADDR 0x01000000
#define NEO_BC3_DST_XY_ADDR 0x02000000
#define NEO_BC3_CLIP_ON 0x04000000
#define NEO_BC3_FIFO_EN 0x08000000
#define NEO_BC3_BLT_ON_ADDR 0x10000000
#define NEO_BC3_SKIP_MAPPING 0x80000000
#define NEO_MODE1_DEPTH8 0x0100
#define NEO_MODE1_DEPTH16 0x0200
#define NEO_MODE1_DEPTH24 0x0300
#define NEO_MODE1_X_320 0x0400
#define NEO_MODE1_X_640 0x0800
#define NEO_MODE1_X_800 0x0c00
#define NEO_MODE1_X_1024 0x1000
#define NEO_MODE1_X_1152 0x1400
#define NEO_MODE1_X_1280 0x1800
#define NEO_MODE1_X_1600 0x1c00
#define NEO_MODE1_BLT_ON_ADDR 0x2000
#define NEOREG_CURSCNTL (nPtr->NeoCursorOffset + 0x00)
#define NEOREG_CURSX (nPtr->NeoCursorOffset + 0x04)
#define NEOREG_CURSY (nPtr->NeoCursorOffset + 0x08)
#define NEOREG_CURSBGCOLOR (nPtr->NeoCursorOffset + 0x0c)
#define NEOREG_CURSFGCOLOR (nPtr->NeoCursorOffset + 0x10)
#define NEOREG_CURSMEMPOS (nPtr->NeoCursorOffset + 0x14)
#define NEO_CURS_DISABLE 0x00000000
#define NEO_CURS_ENABLE 0x00000001
#define NEO_ICON64_ENABLE 0x00000008
#define NEO_ICON128_ENABLE 0x0000000c
#define NEO_ICON_BLANK 0x00000010
xf86-video-neomagic-1.2.9/src/compat-api.h 0000644 0001750 0001750 00000006743 12522705002 015122 0000000 0000000 /*
* Copyright 2012 Red Hat, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Author: Dave Airlie
*/
/* this file provides API compat between server post 1.13 and pre it,
it should be reused inside as many drivers as possible */
#ifndef COMPAT_API_H
#define COMPAT_API_H
#ifndef GLYPH_HAS_GLYPH_PICTURE_ACCESSOR
#define GetGlyphPicture(g, s) GlyphPicture((g))[(s)->myNum]
#define SetGlyphPicture(g, s, p) GlyphPicture((g))[(s)->myNum] = p
#endif
#ifndef XF86_HAS_SCRN_CONV
#define xf86ScreenToScrn(s) xf86Screens[(s)->myNum]
#define xf86ScrnToScreen(s) screenInfo.screens[(s)->scrnIndex]
#endif
#ifndef XF86_SCRN_INTERFACE
#define SCRN_ARG_TYPE int
#define SCRN_INFO_PTR(arg1) ScrnInfoPtr pScrn = xf86Screens[(arg1)]
#define SCREEN_ARG_TYPE int
#define SCREEN_PTR(arg1) ScreenPtr pScreen = screenInfo.screens[(arg1)]
#define SCREEN_INIT_ARGS_DECL int i, ScreenPtr pScreen, int argc, char **argv
#define BLOCKHANDLER_ARGS_DECL int arg, pointer blockData, pointer pTimeout, pointer pReadmask
#define BLOCKHANDLER_ARGS arg, blockData, pTimeout, pReadmask
#define CLOSE_SCREEN_ARGS_DECL int scrnIndex, ScreenPtr pScreen
#define CLOSE_SCREEN_ARGS scrnIndex, pScreen
#define ADJUST_FRAME_ARGS_DECL int arg, int x, int y, int flags
#define ADJUST_FRAME_ARGS(arg, x, y) (arg)->scrnIndex, x, y, 0
#define SWITCH_MODE_ARGS_DECL int arg, DisplayModePtr mode, int flags
#define SWITCH_MODE_ARGS(arg, m) (arg)->scrnIndex, m, 0
#define FREE_SCREEN_ARGS_DECL int arg, int flags
#define VT_FUNC_ARGS_DECL int arg, int flags
#define VT_FUNC_ARGS pScrn->scrnIndex, 0
#define XF86_SCRN_ARG(x) ((x)->scrnIndex)
#else
#define SCRN_ARG_TYPE ScrnInfoPtr
#define SCRN_INFO_PTR(arg1) ScrnInfoPtr pScrn = (arg1)
#define SCREEN_ARG_TYPE ScreenPtr
#define SCREEN_PTR(arg1) ScreenPtr pScreen = (arg1)
#define SCREEN_INIT_ARGS_DECL ScreenPtr pScreen, int argc, char **argv
#define BLOCKHANDLER_ARGS_DECL ScreenPtr arg, pointer pTimeout, pointer pReadmask
#define BLOCKHANDLER_ARGS arg, pTimeout, pReadmask
#define CLOSE_SCREEN_ARGS_DECL ScreenPtr pScreen
#define CLOSE_SCREEN_ARGS pScreen
#define ADJUST_FRAME_ARGS_DECL ScrnInfoPtr arg, int x, int y
#define ADJUST_FRAME_ARGS(arg, x, y) arg, x, y
#define SWITCH_MODE_ARGS_DECL ScrnInfoPtr arg, DisplayModePtr mode
#define SWITCH_MODE_ARGS(arg, m) arg, m
#define FREE_SCREEN_ARGS_DECL ScrnInfoPtr arg
#define VT_FUNC_ARGS_DECL ScrnInfoPtr arg
#define VT_FUNC_ARGS pScrn
#define XF86_SCRN_ARG(x) (x)
#endif
#endif
xf86-video-neomagic-1.2.9/src/Makefile.in 0000644 0001750 0001750 00000056073 12523103227 014767 0000000 0000000 # Makefile.in generated by automake 1.14.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2013 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# Copyright 2005 Adam Jackson.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# on the rights to use, copy, modify, merge, publish, distribute, sub
# license, and/or sell copies of the Software, and to permit persons to whom
# the Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice (including the next
# paragraph) shall be included in all copies or substantial portions of the
# Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
# ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
# IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
VPATH = @srcdir@
am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = src
DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
$(top_srcdir)/depcomp
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
am__installdirs = "$(DESTDIR)$(neomagic_drv_ladir)"
LTLIBRARIES = $(neomagic_drv_la_LTLIBRARIES)
neomagic_drv_la_LIBADD =
am_neomagic_drv_la_OBJECTS = neo_2070.lo neo_2090.lo neo_2097.lo \
neo_2200.lo neo_cursor.lo neo_dga.lo neo_driver.lo neo_i2c.lo \
neo_shadow.lo neo_video.lo
neomagic_drv_la_OBJECTS = $(am_neomagic_drv_la_OBJECTS)
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 =
neomagic_drv_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
$(AM_CFLAGS) $(CFLAGS) $(neomagic_drv_la_LDFLAGS) $(LDFLAGS) \
-o $@
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo " CC " $@;
am__v_CC_1 =
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo " CCLD " $@;
am__v_CCLD_1 =
SOURCES = $(neomagic_drv_la_SOURCES)
DIST_SOURCES = $(neomagic_drv_la_SOURCES)
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
APP_MAN_DIR = @APP_MAN_DIR@
APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BASE_CFLAGS = @BASE_CFLAGS@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CHANGELOG_CMD = @CHANGELOG_CMD@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CWARNFLAGS = @CWARNFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
DRIVER_NAME = @DRIVER_NAME@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FILE_MAN_DIR = @FILE_MAN_DIR@
FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_CMD = @INSTALL_CMD@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIB_MAN_DIR = @LIB_MAN_DIR@
LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MAN_SUBSTS = @MAN_SUBSTS@
MISC_MAN_DIR = @MISC_MAN_DIR@
MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
PCIACCESS_LIBS = @PCIACCESS_LIBS@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRICT_CFLAGS = @STRICT_CFLAGS@
STRIP = @STRIP@
VERSION = @VERSION@
XORG_CFLAGS = @XORG_CFLAGS@
XORG_LIBS = @XORG_LIBS@
XORG_MAN_PAGE = @XORG_MAN_PAGE@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
moduledir = @moduledir@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
# this is obnoxious:
# -module lets us name the module exactly how we want
# -avoid-version prevents gratuitous .0.0.0 version numbers on the end
# _ladir passes a dummy rpath to libtool so the thing will actually link
# TODO: -nostdlib/-Bstatic/-lgcc platform magic, not installing the .a, etc.
AM_CFLAGS = @XORG_CFLAGS@
neomagic_drv_la_LTLIBRARIES = neomagic_drv.la
neomagic_drv_la_LDFLAGS = -module -avoid-version
neomagic_drv_ladir = @moduledir@/drivers
neomagic_drv_la_SOURCES = \
neo_2070.c \
neo_2090.c \
neo_2097.c \
neo_2200.c \
neo_cursor.c \
neo_dga.c \
neo_driver.c \
neo.h \
neo_i2c.c \
neo_macros.h \
neo_reg.h \
neo_shadow.c \
neo_video.c \
neo_video.h \
neo_pcirename.h \
compat-api.h
all: all-am
.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign src/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-neomagic_drv_laLTLIBRARIES: $(neomagic_drv_la_LTLIBRARIES)
@$(NORMAL_INSTALL)
@list='$(neomagic_drv_la_LTLIBRARIES)'; test -n "$(neomagic_drv_ladir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
list2="$$list2 $$p"; \
else :; fi; \
done; \
test -z "$$list2" || { \
echo " $(MKDIR_P) '$(DESTDIR)$(neomagic_drv_ladir)'"; \
$(MKDIR_P) "$(DESTDIR)$(neomagic_drv_ladir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(neomagic_drv_ladir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(neomagic_drv_ladir)"; \
}
uninstall-neomagic_drv_laLTLIBRARIES:
@$(NORMAL_UNINSTALL)
@list='$(neomagic_drv_la_LTLIBRARIES)'; test -n "$(neomagic_drv_ladir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(neomagic_drv_ladir)/$$f'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(neomagic_drv_ladir)/$$f"; \
done
clean-neomagic_drv_laLTLIBRARIES:
-test -z "$(neomagic_drv_la_LTLIBRARIES)" || rm -f $(neomagic_drv_la_LTLIBRARIES)
@list='$(neomagic_drv_la_LTLIBRARIES)'; \
locs=`for p in $$list; do echo $$p; done | \
sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
sort -u`; \
test -z "$$locs" || { \
echo rm -f $${locs}; \
rm -f $${locs}; \
}
neomagic_drv.la: $(neomagic_drv_la_OBJECTS) $(neomagic_drv_la_DEPENDENCIES) $(EXTRA_neomagic_drv_la_DEPENDENCIES)
$(AM_V_CCLD)$(neomagic_drv_la_LINK) -rpath $(neomagic_drv_ladir) $(neomagic_drv_la_OBJECTS) $(neomagic_drv_la_LIBADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/neo_2070.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/neo_2090.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/neo_2097.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/neo_2200.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/neo_cursor.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/neo_dga.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/neo_driver.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/neo_i2c.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/neo_shadow.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/neo_video.Plo@am__quote@
.c.o:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
.c.obj:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.c.lo:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-am
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-am
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(LTLIBRARIES)
installdirs:
for dir in "$(DESTDIR)$(neomagic_drv_ladir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic clean-libtool clean-neomagic_drv_laLTLIBRARIES \
mostlyclean-am
distclean: distclean-am
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-tags
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am: install-neomagic_drv_laLTLIBRARIES
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am:
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man:
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -rf ./$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-neomagic_drv_laLTLIBRARIES
.MAKE: install-am install-strip
.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
clean-libtool clean-neomagic_drv_laLTLIBRARIES cscopelist-am \
ctags ctags-am distclean distclean-compile distclean-generic \
distclean-libtool distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-neomagic_drv_laLTLIBRARIES \
install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
pdf pdf-am ps ps-am tags tags-am uninstall uninstall-am \
uninstall-neomagic_drv_laLTLIBRARIES
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
xf86-video-neomagic-1.2.9/src/neo_2200.c 0000644 0001750 0001750 00000045502 12522705002 014303 0000000 0000000 /********************************************************************
Copyright 1998, 1999 by Precision Insight, Inc., Cedar Park, Texas.
All Rights Reserved
Permission to use, copy, modify, distribute, and sell this software and
its documentation for any purpose is hereby granted without fee,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of Precision Insight not be
used in advertising or publicity pertaining to distribution of the
software without specific, written prior permission. Precision Insight
and its suppliers make no representations about the suitability of this
software for any purpose. It is provided "as is" without express or
implied warranty.
PRECISION INSIGHT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
**********************************************************************/
/*
* The original Precision Insight driver for
* XFree86 v.3.3 has been sponsored by Red Hat.
*
* Authors:
* Jens Owen (jens@tungstengraphics.com)
* Kevin E. Martin (kevin@precisioninsight.com)
*
* Port to Xfree86 v.4.0
* 1998, 1999 by Egbert Eich (Egbert.Eich@Physik.TU-Darmstadt.DE)
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "xf86.h"
#include "xf86_OSproc.h"
#include "compiler.h"
/* Drivers that use XAA need this */
#include "xf86fbman.h"
#include "miline.h"
#include "neo.h"
#include "neo_reg.h"
#include "neo_macros.h"
#ifdef HAVE_XAA_H
static void Neo2200Sync(ScrnInfoPtr pScrn);
static void Neo2200SetupForScreenToScreenCopy(ScrnInfoPtr pScrn, int xdir,
int ydir, int rop,
unsigned int planemask,
int trans_color);
#ifdef NOT_BROKEN
static void Neo2200SubsequentScreenToScreenCopy(ScrnInfoPtr pScrn, int srcX,
int srcY, int dstX, int dstY,
int w, int h);
#else
static void Neo2200SubsequentScreenToScreenCopyBroken(ScrnInfoPtr pScrn, int srcX,
int srcY, int dstX, int dstY,
int w, int h);
#endif
static void Neo2200SetupForSolidFillRect(ScrnInfoPtr pScrn, int color, int rop,
unsigned int planemask);
static void Neo2200SubsequentSolidFillRect(ScrnInfoPtr pScrn, int x, int y,
int w, int h);
static void Neo2200SetupForScanlineCPUToScreenColorExpandFill(
ScrnInfoPtr pScrn,
int fg, int bg,
int rop,
unsigned int planemask);
static void Neo2200SubsequentScanlineCPUToScreenColorExpandFill(
ScrnInfoPtr pScrn,
int x, int y,
int w, int h,
int skipleft);
static void Neo2200SubsequentColorExpandScanline(ScrnInfoPtr pScrn, int bufno);
#if 0
static void Neo2200SetupForMono8x8PatternFill(ScrnInfoPtr pScrn,
int patternx,
int patterny,
int bg,
int fg,
int rop,
unsigned int planemask);
static void Neo2200SubsequentMono8x8PatternFill(ScrnInfoPtr pScrn,
int patternx,
int patterny,
int x, int y,
int w, int h);
#endif
static unsigned int neo2200Rop[16] = {
0x000000, /* 0x0000 - GXclear */
0x080000, /* 0x1000 - GXand */
0x040000, /* 0x0100 - GXandReverse */
0x0c0000, /* 0x1100 - GXcopy */
0x020000, /* 0x0010 - GXandInvert */
0x0a0000, /* 0x1010 - GXnoop */
0x060000, /* 0x0110 - GXxor */
0x0e0000, /* 0x1110 - GXor */
0x010000, /* 0x0001 - GXnor */
0x090000, /* 0x1001 - GXequiv */
0x050000, /* 0x0101 - GXinvert */
0x0d0000, /* 0x1101 - GXorReverse */
0x030000, /* 0x0011 - GXcopyInvert */
0x0b0000, /* 0x1011 - GXorInverted */
0x070000, /* 0x0111 - GXnand */
0x0f0000 /* 0x1111 - GXset */
};
#endif
Bool
Neo2200AccelInit(ScreenPtr pScreen)
{
#ifdef HAVE_XAA_H
XAAInfoRecPtr infoPtr;
ScrnInfoPtr pScrn = xf86ScreenToScrn(pScreen);
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
nPtr->AccelInfoRec = infoPtr = XAACreateInfoRec();
if(!infoPtr) return FALSE;
/*
* Set up the main acceleration flags.
*/
infoPtr->Flags = LINEAR_FRAMEBUFFER | OFFSCREEN_PIXMAPS;
if(nAcl->cacheEnd > nAcl->cacheStart) infoPtr->Flags |= PIXMAP_CACHE;
#if 0
infoPtr->PixmapCacheFlags |= DO_NOT_BLIT_STIPPLES;
#endif
/* sync */
infoPtr->Sync = Neo2200Sync;
/* screen to screen copy */
infoPtr->ScreenToScreenCopyFlags = (NO_TRANSPARENCY | NO_PLANEMASK);
infoPtr->SetupForScreenToScreenCopy =
Neo2200SetupForScreenToScreenCopy;
infoPtr->SubsequentScreenToScreenCopy
#ifdef NOT_BROKEN
= Neo2200SubsequentScreenToScreenCopy;
#else
= Neo2200SubsequentScreenToScreenCopyBroken;
#endif
/* solid filled rectangles */
infoPtr->SolidFillFlags = NO_PLANEMASK;
infoPtr->SetupForSolidFill =
Neo2200SetupForSolidFillRect;
infoPtr->SubsequentSolidFillRect =
Neo2200SubsequentSolidFillRect;
/* cpu to screen color expansion */
/*
* We do CPUToScreenColorExpand (ab)using the Scanline functions:
* the neo chipsets need byte padding however we can only do dword
* padding. Fortunately the graphics engine doesn't choke if we
* transfer up to 3 bytes more than it wants.
*/
if (!nPtr->strangeLockups) {
infoPtr->ScanlineCPUToScreenColorExpandFillFlags = ( NO_PLANEMASK |
#ifdef NEO_DO_CLIPPING
LEFT_EDGE_CLIPPING |
#endif
SCANLINE_PAD_DWORD |
CPU_TRANSFER_PAD_DWORD |
BIT_ORDER_IN_BYTE_MSBFIRST );
infoPtr->ScanlineColorExpandBuffers =
(unsigned char **)xnfalloc(sizeof(char*));
infoPtr->ScanlineColorExpandBuffers[0] =
(unsigned char *)(nPtr->NeoMMIOBase + 0x100000);
infoPtr->NumScanlineColorExpandBuffers = 1;
infoPtr->SetupForScanlineCPUToScreenColorExpandFill =
Neo2200SetupForScanlineCPUToScreenColorExpandFill;
infoPtr->SubsequentScanlineCPUToScreenColorExpandFill =
Neo2200SubsequentScanlineCPUToScreenColorExpandFill;
infoPtr->SubsequentColorExpandScanline =
Neo2200SubsequentColorExpandScanline;
}
#if 0
/* 8x8 pattern fills */
infoPtr->Mono8x8PatternFillFlags = NO_PLANEMASK
| HARDWARE_PATTERN_PROGRAMMED_ORIGIN
|BIT_ORDER_IN_BYTE_MSBFIRST;
infoPtr->SetupForMono8x8PatternFill =
Neo2200SetupForMono8x8PatternFill;
infoPtr->SubsequentMono8x8PatternFillRect =
Neo2200SubsequentMono8x8PatternFill;
#endif
/*
* Setup some global variables
*/
/* Initialize for 8bpp or 15/16bpp support accelerated */
switch (pScrn->bitsPerPixel) {
case 8:
nAcl->BltModeFlags = NEO_MODE1_DEPTH8;
nAcl->PixelWidth = 1;
break;
case 15:
case 16:
nAcl->BltModeFlags = NEO_MODE1_DEPTH16;
nAcl->PixelWidth = 2;
break;
case 24:
if (nPtr->noAccelSet || nPtr->NeoChipset == NM2230
|| nPtr->NeoChipset == NM2360
|| nPtr->NeoChipset == NM2380) {
nAcl->BltModeFlags = NEO_MODE1_DEPTH24;
nAcl->PixelWidth = 3;
} else
return FALSE;
break;
default:
return FALSE;
}
nAcl->Pitch = pScrn->displayWidth * nAcl->PixelWidth;
/* Initialize for widths */
switch (pScrn->displayWidth) {
case 320:
nAcl->BltModeFlags |= NEO_MODE1_X_320;
break;
case 640:
nAcl->BltModeFlags |= NEO_MODE1_X_640;
break;
case 800:
nAcl->BltModeFlags |= NEO_MODE1_X_800;
break;
case 1024:
nAcl->BltModeFlags |= NEO_MODE1_X_1024;
break;
case 1152:
nAcl->BltModeFlags |= NEO_MODE1_X_1152;
break;
case 1280:
nAcl->BltModeFlags |= NEO_MODE1_X_1280;
break;
case 1600:
nAcl->BltModeFlags |= NEO_MODE1_X_1600;
break;
default:
return FALSE;
}
return(XAAInit(pScreen, infoPtr));
#else
return FALSE;
#endif
}
#ifdef HAVE_XAA_H
static void
Neo2200Sync(ScrnInfoPtr pScrn)
{
NEOPtr nPtr = NEOPTR(pScrn);
WAIT_ENGINE_IDLE();
}
static void
Neo2200SetupForScreenToScreenCopy(ScrnInfoPtr pScrn, int xdir, int ydir,
int rop,
unsigned int planemask,
int trans_color)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
nAcl->tmpBltCntlFlags = (NEO_BC3_SKIP_MAPPING | neo2200Rop[rop]);
/* set blt control */
WAIT_ENGINE_IDLE();
/*OUTREG16(NEOREG_BLTMODE, nAcl->BltModeFlags);*/
OUTREG(NEOREG_BLTSTAT, nAcl->BltModeFlags << 16);
OUTREG(NEOREG_BLTCNTL, nAcl->tmpBltCntlFlags);
OUTREG(NEOREG_PITCH, (nAcl->Pitch<<16)
| (nAcl->Pitch & 0xffff));
}
#ifdef NOT_BROKEN
static void
Neo2200SubsequentScreenToScreenCopy(ScrnInfoPtr pScrn,
int srcX, int srcY,
int dstX, int dstY,
int w, int h)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
if ((dstY < srcY) || ((dstY == srcY) && (dstX < srcX))) {
/* start with upper left corner */
WAIT_ENGINE_IDLE();
#if 0
OUTREG(NEOREG_BLTCNTL, nAcl->tmpBltCntlFlags);
#endif
OUTREG(NEOREG_SRCSTARTOFF,
(srcY * nAcl->Pitch) + (srcX * nAcl->PixelWidth));
OUTREG(NEOREG_DSTSTARTOFF,
(dstY * nAcl->Pitch) + (dstX * nAcl->PixelWidth));
OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff));
}
else {
/* start with lower right corner */
WAIT_ENGINE_IDLE();
#if 0
OUTREG(NEOREG_BLTCNTL, (nAcl->tmpBltCntlFlags
| NEO_BC0_X_DEC
| NEO_BC0_DST_Y_DEC
| NEO_BC0_SRC_Y_DEC));
#endif
OUTREG(NEOREG_SRCSTARTOFF,
((srcY+h-1) * nAcl->Pitch) + ((srcX+w-1)
* nAcl->PixelWidth));
OUTREG(NEOREG_DSTSTARTOFF,
((dstY+h-1) * nAcl->Pitch) + ((dstX+w-1)
* nAcl->PixelWidth));
OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff));
}
}
#else /* NOT_BROKEN */
static void
Neo2200SubsequentScreenToScreenCopyBroken(ScrnInfoPtr pScrn,
int srcX, int srcY,
int dstX, int dstY,
int w, int h)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
if ((dstY < srcY) || ((dstY == srcY) && (dstX < srcX))) {
if ((((dstX < 64) && ((srcX + w + 64) >= pScrn->displayWidth)) ||
((dstX == 0) && (w > (pScrn->displayWidth - 64)))) && (w > 64)) {
#define COPY_64 \
OUTREG(NEOREG_SRCSTARTOFF,\
(srcY * nAcl->Pitch) + (srcX * nAcl->PixelWidth));\
OUTREG(NEOREG_DSTSTARTOFF,\
(dstY * nAcl->Pitch) + (dstX * nAcl->PixelWidth));\
OUTREG(NEOREG_XYEXT, (h<<16) | (64));
#define COPY_W \
OUTREG(NEOREG_SRCSTARTOFF,\
(srcY * nAcl->Pitch) + (srcX1 * nAcl->PixelWidth));\
OUTREG(NEOREG_DSTSTARTOFF,\
(dstY * nAcl->Pitch) + (dstX1 * nAcl->PixelWidth));\
OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff));
int srcX1 = srcX + 64;
int dstX1 = dstX + 64;
w -= 64;
/* start with upper left corner */
WAIT_ENGINE_IDLE();
OUTREG(NEOREG_BLTCNTL, nAcl->tmpBltCntlFlags);
if (srcX < dstX) {
COPY_W;
WAIT_ENGINE_IDLE();
COPY_64;
} else {
COPY_64;
WAIT_ENGINE_IDLE();
COPY_W;
}
#undef COPY_W
#undef COPY_64
} else {
/* start with upper left corner */
WAIT_ENGINE_IDLE();
OUTREG(NEOREG_BLTCNTL, nAcl->tmpBltCntlFlags);
OUTREG(NEOREG_SRCSTARTOFF,
(srcY * nAcl->Pitch) + (srcX * nAcl->PixelWidth));
OUTREG(NEOREG_DSTSTARTOFF,
(dstY * nAcl->Pitch) + (dstX * nAcl->PixelWidth));
OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff));
}
} else {
if (((((dstX + w) > (pScrn->displayWidth - 64)) && (srcX == 0))
|| (((dstX + w + 64) >= pScrn->displayWidth)
&& (w > (pScrn->displayWidth - 64)))) && (w > 64)) {
#define COPY_64 \
OUTREG(NEOREG_SRCSTARTOFF, \
((srcY+h-1) * nAcl->Pitch) + ((srcX1+64-1) \
* nAcl->PixelWidth)); \
OUTREG(NEOREG_DSTSTARTOFF, \
((dstY+h-1) * nAcl->Pitch) + ((dstX1+64-1) \
* nAcl->PixelWidth)); \
OUTREG(NEOREG_XYEXT, (h<<16) | (64 & 0xffff));
#define COPY_W \
OUTREG(NEOREG_SRCSTARTOFF, \
((srcY+h-1) * nAcl->Pitch) + ((srcX + w -1) \
* nAcl->PixelWidth)); \
OUTREG(NEOREG_DSTSTARTOFF, \
((dstY+h-1) * nAcl->Pitch) + ((dstX + w -1) \
* nAcl->PixelWidth)); \
OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff));
int srcX1, dstX1;
w -= 64;
srcX1 = srcX + w;
dstX1 = dstX + w;
/* start with lower right corner */
WAIT_ENGINE_IDLE();
OUTREG(NEOREG_BLTCNTL, (nAcl->tmpBltCntlFlags
| NEO_BC0_X_DEC
| NEO_BC0_DST_Y_DEC
| NEO_BC0_SRC_Y_DEC));
if (srcX < dstX) {
COPY_64;
WAIT_ENGINE_IDLE();
COPY_W;
} else {
COPY_W;
WAIT_ENGINE_IDLE();
COPY_64;
}
#undef COPY_W
#undef COPY_64
} else {
/* start with lower right corner */
WAIT_ENGINE_IDLE();
OUTREG(NEOREG_BLTCNTL, (nAcl->tmpBltCntlFlags
| NEO_BC0_X_DEC
| NEO_BC0_DST_Y_DEC
| NEO_BC0_SRC_Y_DEC));
OUTREG(NEOREG_SRCSTARTOFF,
((srcY+h-1) * nAcl->Pitch) + ((srcX+w-1)
* nAcl->PixelWidth));
OUTREG(NEOREG_DSTSTARTOFF,
((dstY+h-1) * nAcl->Pitch) + ((dstX+w-1)
* nAcl->PixelWidth));
OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff));
}
}
}
#endif /* NOT_BROKEN */
static void
Neo2200SetupForSolidFillRect(ScrnInfoPtr pScrn, int color, int rop,
unsigned int planemask)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
WAIT_ENGINE_IDLE();
/* set blt control */
/*OUTREG16(NEOREG_BLTMODE, nAcl->BltModeFlags);*/
OUTREG(NEOREG_BLTSTAT, nAcl->BltModeFlags << 16);
OUTREG(NEOREG_BLTCNTL, NEO_BC0_SRC_IS_FG |
NEO_BC3_SKIP_MAPPING |
NEO_BC3_DST_XY_ADDR |
NEO_BC3_SRC_XY_ADDR | neo2200Rop[rop]);
/* set foreground color */
OUTREG(NEOREG_FGCOLOR, color);
}
static void
Neo2200SubsequentSolidFillRect(ScrnInfoPtr pScrn, int x, int y, int w, int h)
{
NEOPtr nPtr = NEOPTR(pScrn);
WAIT_ENGINE_IDLE();
OUTREG(NEOREG_DSTSTARTOFF, (y <<16) | (x & 0xffff));
OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff));
}
static void
Neo2200SetupForScanlineCPUToScreenColorExpandFill(ScrnInfoPtr pScrn,
int fg, int bg,
int rop,
unsigned int planemask)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
if (bg == -1) {
/* transparent setup */
nAcl->tmpBltCntlFlags = ( NEO_BC0_SYS_TO_VID |
NEO_BC0_SRC_MONO |
NEO_BC0_SRC_TRANS |
NEO_BC3_SKIP_MAPPING |
NEO_BC3_DST_XY_ADDR |
#ifdef NEO_DO_CLIPPING
NEO_BC3_CLIP_ON |
#endif
neo2200Rop[rop]);
WAIT_ENGINE_IDLE();
/*OUTREG16(NEOREG_BLTMODE, nAcl->BltModeFlags);*/
OUTREG(NEOREG_BLTSTAT, nAcl->BltModeFlags << 16);
OUTREG(NEOREG_BLTCNTL, nAcl->tmpBltCntlFlags);
OUTREG(NEOREG_FGCOLOR, fg);
}
else {
/* opaque setup */
nAcl->tmpBltCntlFlags = ( NEO_BC0_SYS_TO_VID |
NEO_BC0_SRC_MONO |
NEO_BC3_SKIP_MAPPING |
NEO_BC3_DST_XY_ADDR |
#ifdef NEO_DO_CLIPPING
NEO_BC3_CLIP_ON |
#endif
neo2200Rop[rop]);
WAIT_ENGINE_IDLE();
/*OUTREG16(NEOREG_BLTMODE, nAcl->BltModeFlags);*/
OUTREG(NEOREG_BLTSTAT, nAcl->BltModeFlags << 16);
OUTREG(NEOREG_FGCOLOR, fg);
OUTREG(NEOREG_BGCOLOR, bg);
}
}
static void
Neo2200SubsequentScanlineCPUToScreenColorExpandFill(ScrnInfoPtr pScrn,
int x, int y,
int w, int h,
int skipleft)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
#ifdef NEO_DO_CLIPPING
w = (w + 31) & ~31;
#else
nAcl->CPUToScreenColorExpandFill_x = x;
nAcl->CPUToScreenColorExpandFill_y = y;
nAcl->CPUToScreenColorExpandFill_w = w;
nAcl->CPUToScreenColorExpandFill_h = h;
nAcl->CPUToScreenColorExpandFill_skipleft = skipleft;
#endif
OUTREG(NEOREG_BLTCNTL, nAcl->tmpBltCntlFlags
| ((skipleft << 2) & 0x1C));
#ifdef NEO_DO_CLIPPING
OUTREG(NEOREG_CLIPLT, (y << 16) | (x + skipleft));
OUTREG(NEOREG_CLIPRB, ((y + h) << 16) | (x + w));
#endif
OUTREG(NEOREG_SRCSTARTOFF, 0);
OUTREG(NEOREG_DSTSTARTOFF, (y<<16) | (x & 0xffff));
#ifdef NEO_DO_CLIPPING
OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff));
#else
OUTREG(NEOREG_XYEXT, (1<<16) | (w & 0xffff));
#endif
}
static void
Neo2200SubsequentColorExpandScanline(ScrnInfoPtr pScrn, int bufno)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
#ifdef NEO_DO_CLIPPING
/* Should I be waiting for fifo slots to prevent retries ?
How do I do that on this engine ? */
#else
if (!(--nAcl->CPUToScreenColorExpandFill_h))
return;
WAIT_ENGINE_IDLE();
OUTREG(NEOREG_BLTCNTL, nAcl->tmpBltCntlFlags
| ((nAcl->CPUToScreenColorExpandFill_skipleft << 2) & 0x1C));
OUTREG(NEOREG_SRCSTARTOFF, 0);
OUTREG(NEOREG_DSTSTARTOFF, ((++nAcl->CPUToScreenColorExpandFill_y)<<16)
| (nAcl->CPUToScreenColorExpandFill_x & 0xffff));
OUTREG(NEOREG_XYEXT, (1<<16)
| (nAcl->CPUToScreenColorExpandFill_w & 0xffff));
#endif
}
#if 0
static void
Neo2200SetupForMono8x8PatternFill(ScrnInfoPtr pScrn,
int patternx,
int patterny,
int fg, int bg,
int rop, unsigned int planemask)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
if (bg == -1) {
/* transparent setup */
nAcl->tmpBltCntlFlags = ( NEO_BC0_SRC_MONO |
NEO_BC0_FILL_PAT |
NEO_BC0_SRC_TRANS |
NEO_BC3_SKIP_MAPPING |
NEO_BC3_DST_XY_ADDR |
neo2200Rop[rop]);
WAIT_ENGINE_IDLE();
/*OUTREG16(NEOREG_BLTMODE, nAcl->BltModeFlags);*/
OUTREG(NEOREG_BLTSTAT, nAcl->BltModeFlags << 16);
OUTREG(NEOREG_FGCOLOR, fg);
OUTREG(NEOREG_SRCSTARTOFF,
(patterny * pScrn->displayWidth * pScrn->bitsPerPixel
+ patternx) >> 3);
}
else {
/* opaque setup */
nAcl->tmpBltCntlFlags = ( NEO_BC0_SRC_MONO |
NEO_BC0_FILL_PAT |
NEO_BC3_SKIP_MAPPING |
NEO_BC3_DST_XY_ADDR |
neo2200Rop[rop]);
WAIT_ENGINE_IDLE();
/*OUTREG16(NEOREG_BLTMODE, nAcl->BltModeFlags);*/
OUTREG(NEOREG_BLTSTAT, nAcl->BltModeFlags << 16);
OUTREG(NEOREG_FGCOLOR, fg);
OUTREG(NEOREG_BGCOLOR, bg);
OUTREG(NEOREG_SRCSTARTOFF,
(patterny * pScrn->displayWidth * pScrn->bitsPerPixel
+ patternx) >> 3);
}
}
static void
Neo2200SubsequentMono8x8PatternFill(ScrnInfoPtr pScrn,
int patternx,
int patterny,
int x, int y,
int w, int h)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
patterny &= 0x7;
WAIT_ENGINE_IDLE();
OUTREG(NEOREG_BLTCNTL, nAcl->tmpBltCntlFlags |
(patterny << 20) |
((patternx << 10) & 0x1C00));
OUTREG(NEOREG_SRCBITOFF, patternx);
OUTREG(NEOREG_DSTSTARTOFF, (y<<16) | (x & 0xffff));
OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff));
}
#endif
#endif
xf86-video-neomagic-1.2.9/src/neo_pcirename.h 0000644 0001750 0001750 00000011563 12216130746 015677 0000000 0000000 /*
* Copyright 2007 George Sapountzis
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
/**
* Macros for porting drivers from legacy xfree86 PCI code to the pciaccess
* library. The main purpose being to facilitate source code compatibility.
*/
#ifndef NEOPCIRENAME_H
#define NEOPCIRENAME_H
enum region_type {
REGION_MEM,
REGION_IO
};
#ifndef XSERVER_LIBPCIACCESS
/* pciVideoPtr */
#define PCI_DEV_VENDOR_ID(_pcidev) ((_pcidev)->vendor)
#define PCI_DEV_DEVICE_ID(_pcidev) ((_pcidev)->chipType)
#define PCI_DEV_REVISION(_pcidev) ((_pcidev)->chipRev)
#define PCI_SUB_VENDOR_ID(_pcidev) ((_pcidev)->subsysVendor)
#define PCI_SUB_DEVICE_ID(_pcidev) ((_pcidev)->subsysCard)
#define PCI_DEV_TAG(_pcidev) pciTag((_pcidev)->bus, \
(_pcidev)->device, \
(_pcidev)->func)
#define PCI_DEV_BUS(_pcidev) ((_pcidev)->bus)
#define PCI_DEV_DEV(_pcidev) ((_pcidev)->device)
#define PCI_DEV_FUNC(_pcidev) ((_pcidev)->func)
/* pciConfigPtr */
#define PCI_CFG_TAG(_pcidev) (((pciConfigPtr)(_pcidev)->thisCard)->tag)
#define PCI_CFG_BUS(_pcidev) (((pciConfigPtr)(_pcidev)->thisCard)->busnum)
#define PCI_CFG_DEV(_pcidev) (((pciConfigPtr)(_pcidev)->thisCard)->devnum)
#define PCI_CFG_FUNC(_pcidev) (((pciConfigPtr)(_pcidev)->thisCard)->funcnum)
/* region addr: xfree86 uses different fields for memory regions and I/O ports */
#define PCI_REGION_BASE(_pcidev, _b, _type) \
(((_type) == REGION_MEM) ? (_pcidev)->memBase[(_b)] \
: (_pcidev)->ioBase[(_b)])
/* region size: xfree86 uses the log2 of the region size,
* but with zero meaning no region, not size of one XXX */
#define PCI_REGION_SIZE(_pcidev, _b) \
(((_pcidev)->size[(_b)] > 0) ? (1 << (_pcidev)->size[(_b)]) : 0)
/* read/write PCI configuration space */
#define PCI_READ_BYTE(_pcidev, _value_ptr, _offset) \
*(_value_ptr) = pciReadByte(PCI_CFG_TAG(_pcidev), (_offset))
#define PCI_READ_LONG(_pcidev, _value_ptr, _offset) \
*(_value_ptr) = pciReadLong(PCI_CFG_TAG(_pcidev), (_offset))
#define PCI_WRITE_LONG(_pcidev, _value, _offset) \
pciWriteLong(PCI_CFG_TAG(_pcidev), (_offset), (_value))
#else /* XSERVER_LIBPCIACCESS */
typedef struct pci_device *pciVideoPtr;
#define PCI_DEV_VENDOR_ID(_pcidev) ((_pcidev)->vendor_id)
#define PCI_DEV_DEVICE_ID(_pcidev) ((_pcidev)->device_id)
#define PCI_DEV_REVISION(_pcidev) ((_pcidev)->revision)
#define PCI_SUB_VENDOR_ID(_pcidev) ((_pcidev)->subvendor_id)
#define PCI_SUB_DEVICE_ID(_pcidev) ((_pcidev)->subdevice_id)
/* pci-rework functions take a 'pci_device' parameter instead of a tag */
#define PCI_DEV_TAG(_pcidev) (_pcidev)
/* PCI_DEV macros, typically used in printf's, add domain ? XXX */
#define PCI_DEV_BUS(_pcidev) ((_pcidev)->bus)
#define PCI_DEV_DEV(_pcidev) ((_pcidev)->dev)
#define PCI_DEV_FUNC(_pcidev) ((_pcidev)->func)
/* pci-rework functions take a 'pci_device' parameter instead of a tag */
#define PCI_CFG_TAG(_pcidev) (_pcidev)
/* PCI_CFG macros, typically used in DRI init, contain the domain */
#define PCI_CFG_BUS(_pcidev) (((_pcidev)->domain << 8) | \
(_pcidev)->bus)
#define PCI_CFG_DEV(_pcidev) ((_pcidev)->dev)
#define PCI_CFG_FUNC(_pcidev) ((_pcidev)->func)
#define PCI_REGION_BASE(_pcidev, _b, _type) ((_pcidev)->regions[(_b)].base_addr)
#define PCI_REGION_SIZE(_pcidev, _b) ((_pcidev)->regions[(_b)].size)
#define PCI_READ_BYTE(_pcidev, _value_ptr, _offset) \
pci_device_cfg_read_u8((_pcidev), (_value_ptr), (_offset))
#define PCI_READ_LONG(_pcidev, _value_ptr, _offset) \
pci_device_cfg_read_u32((_pcidev), (_value_ptr), (_offset))
#define PCI_WRITE_LONG(_pcidev, _value, _offset) \
pci_device_cfg_write_u32((_pcidev), (_value), (_offset))
#endif /* XSERVER_LIBPCIACCESS */
#endif /* NEOPCIRENAME_H */
xf86-video-neomagic-1.2.9/src/neo_2090.c 0000644 0001750 0001750 00000026423 12522705002 014313 0000000 0000000 /**********************************************************************
Copyright 1998, 1999 by Precision Insight, Inc., Cedar Park, Texas.
All Rights Reserved
Permission to use, copy, modify, distribute, and sell this software and
its documentation for any purpose is hereby granted without fee,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of Precision Insight not be
used in advertising or publicity pertaining to distribution of the
software without specific, written prior permission. Precision Insight
and its suppliers make no representations about the suitability of this
software for any purpose. It is provided "as is" without express or
implied warranty.
PRECISION INSIGHT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
**********************************************************************/
/*
* The original Precision Insight driver for
* XFree86 v.3.3 has been sponsored by Red Hat.
*
* Authors:
* Jens Owen (jens@tungstengraphics.com)
* Kevin E. Martin (kevin@precisioninsight.com)
*
* Port to Xfree86 v.4.0
* 1998, 1999 by Egbert Eich (Egbert.Eich@Physik.TU-Darmstadt.DE)
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "xf86.h"
#include "xf86_OSproc.h"
#include "compiler.h"
/* Drivers that use XAA need this */
#include "xf86fbman.h"
#include "miline.h"
#include "neo.h"
#include "neo_reg.h"
#include "neo_macros.h"
#ifdef HAVE_XAA_H
static unsigned int neo2090Rop[16] = {
0x000000, /* 0x0000 - GXclear */
0x080000, /* 0x1000 - GXand */
0x040000, /* 0x0100 - GXandReverse */
0x0c0000, /* 0x1100 - GXcopy */
0x020000, /* 0x0010 - GXandInvert */
0x0a0000, /* 0x1010 - GXnoop */
0x060000, /* 0x0110 - GXxor */
0x0e0000, /* 0x1110 - GXor */
0x010000, /* 0x0001 - GXnor */
0x090000, /* 0x1001 - GXequiv */
0x050000, /* 0x0101 - GXinvert */
0x0d0000, /* 0x1101 - GXorReverse */
0x030000, /* 0x0011 - GXcopyInvert */
0x0b0000, /* 0x1011 - GXorInverted */
0x070000, /* 0x0111 - GXnand */
0x0f0000 /* 0x1111 - GXset */
};
static void Neo2090Sync(ScrnInfoPtr pScrn);
static void Neo2090SetupForScreenToScreenCopy(ScrnInfoPtr pScrn, int xdir,
int ydir, int rop,
unsigned int planemask,
int trans_color);
static void Neo2090SubsequentScreenToScreenCopy(ScrnInfoPtr pScrn, int srcX,
int srcY, int dstX, int dstY,
int w, int h);
static void Neo2090SetupForSolidFillRect(ScrnInfoPtr pScrn, int color, int rop,
unsigned int planemask);
static void Neo2090SubsequentSolidFillRect(ScrnInfoPtr pScrn, int x, int y,
int w, int h);
static void Neo2093SetupForScanlineCPUToScreenColorExpandFill(
ScrnInfoPtr pScrn,
int fg, int bg,
int rop,
unsigned int planemask);
static void Neo2093SubsequentScanlineCPUToScreenColorExpandFill(
ScrnInfoPtr pScrn,
int x, int y,
int w, int h,
int skipleft);
static void Neo2093SubsequentColorExpandScanline(ScrnInfoPtr pScrn, int bufno);
#endif
Bool
Neo2090AccelInit(ScreenPtr pScreen)
{
#ifdef HAVE_XAA_H
XAAInfoRecPtr infoPtr;
ScrnInfoPtr pScrn = xf86ScreenToScrn(pScreen);
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
nPtr->AccelInfoRec = infoPtr = XAACreateInfoRec();
if(!infoPtr) return FALSE;
/*
* Set up the main acceleration flags.
*/
infoPtr->Flags = LINEAR_FRAMEBUFFER | OFFSCREEN_PIXMAPS;
if(nAcl->cacheEnd > nAcl->cacheStart) infoPtr->Flags |= PIXMAP_CACHE;
#if 0
infoPtr->PixmapCacheFlags |= DO_NOT_BLIT_STIPPLES;
#endif
/* sync */
infoPtr->Sync = Neo2090Sync;
/* screen to screen copy */
infoPtr->ScreenToScreenCopyFlags = (NO_TRANSPARENCY | NO_PLANEMASK);
infoPtr->SetupForScreenToScreenCopy =
Neo2090SetupForScreenToScreenCopy;
infoPtr->SubsequentScreenToScreenCopy =
Neo2090SubsequentScreenToScreenCopy;
/* solid filled rectangles */
infoPtr->SolidFillFlags = NO_PLANEMASK;
infoPtr->SetupForSolidFill =
Neo2090SetupForSolidFillRect;
infoPtr->SubsequentSolidFillRect =
Neo2090SubsequentSolidFillRect;
if (nPtr->NeoChipset == PCI_CHIP_NM2093 && !nPtr->strangeLockups) {
/*
* We do CPUToScreenColorExpand (ab)using the Scanline functions:
* the neo chipsets need byte padding however we can only do dword
* padding. Fortunately the graphics engine doesn't choke if we
* transfer up to 3 bytes more than it wants.
*/
/* cpu to screen color expansion */
infoPtr->ScanlineColorExpandBuffers =
(unsigned char **)xnfalloc(sizeof(char*));
infoPtr->ScanlineColorExpandBuffers[0] =
(unsigned char *)(nPtr->NeoMMIOBase + 0x100000);
infoPtr->NumScanlineColorExpandBuffers = 1;
infoPtr->ScanlineCPUToScreenColorExpandFillFlags = ( NO_PLANEMASK |
SCANLINE_PAD_DWORD |
CPU_TRANSFER_PAD_DWORD |
BIT_ORDER_IN_BYTE_MSBFIRST );
infoPtr->SetupForScanlineCPUToScreenColorExpandFill =
Neo2093SetupForScanlineCPUToScreenColorExpandFill;
infoPtr->SubsequentScanlineCPUToScreenColorExpandFill =
Neo2093SubsequentScanlineCPUToScreenColorExpandFill;
infoPtr->SubsequentColorExpandScanline =
Neo2093SubsequentColorExpandScanline;
}
/*
* Setup some global variables
*/
nAcl->ColorShiftAmt = 0;
/* Initialize for 8bpp or 15/16bpp support accellerated */
switch (pScrn->bitsPerPixel) {
case 8:
nAcl->BltCntlFlags = NEO_BC1_DEPTH8;
nAcl->ColorShiftAmt = 8;
break;
case 15:
case 16:
nAcl->BltCntlFlags = NEO_BC1_DEPTH16;
nAcl->ColorShiftAmt = 0;
break;
case 24:
default:
return FALSE;
}
/* Initialize for widths */
switch (pScrn->displayWidth) {
case 640:
nAcl->BltCntlFlags |= NEO_BC1_X_640;
break;
case 800:
nAcl->BltCntlFlags |= NEO_BC1_X_800;
break;
case 1024:
nAcl->BltCntlFlags |= NEO_BC1_X_1024;
break;
default:
return FALSE;
}
nAcl->BltCntlFlags |= NEO_BC3_FIFO_EN;
return(XAAInit(pScreen, infoPtr));
#else
return FALSE;
#endif
}
#ifdef HAVE_XAA_H
static void
Neo2090Sync(ScrnInfoPtr pScrn)
{
NEOPtr nPtr = NEOPTR(pScrn);
WAIT_ENGINE_IDLE();
}
static void
Neo2090SetupForScreenToScreenCopy(ScrnInfoPtr pScrn, int xdir, int ydir,
int rop,
unsigned int planemask,
int trans_color)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
nAcl->tmpBltCntlFlags = (nAcl->BltCntlFlags |
NEO_BC3_SKIP_MAPPING |
NEO_BC3_DST_XY_ADDR |
NEO_BC3_SRC_XY_ADDR | neo2090Rop[rop]);
/* set blt control */
WAIT_FIFO(2);
OUTREG(NEOREG_BLTCNTL, nAcl->tmpBltCntlFlags);
}
static void
Neo2090SubsequentScreenToScreenCopy(ScrnInfoPtr pScrn,
int srcX, int srcY,
int dstX, int dstY,
int w, int h)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
if ((dstY < srcY) || ((dstY == srcY) && (dstX < srcX))) {
/* start with upper left corner */
WAIT_FIFO(4);
OUTREG(NEOREG_BLTCNTL, nAcl->tmpBltCntlFlags);
OUTREG(NEOREG_SRCSTARTOFF, (srcY<<16) | (srcX & 0xffff));
OUTREG(NEOREG_DSTSTARTOFF, (dstY<<16) | (dstX & 0xffff));
OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff));
}
else {
/* start with lower right corner */
WAIT_FIFO(4);
OUTREG(NEOREG_BLTCNTL, (nAcl->tmpBltCntlFlags | NEO_BC0_X_DEC
| NEO_BC0_DST_Y_DEC
| NEO_BC0_SRC_Y_DEC));
OUTREG(NEOREG_SRCSTARTOFF, ((srcY+h-1)<<16) | ((srcX+w-1) & 0xffff));
OUTREG(NEOREG_DSTSTARTOFF, ((dstY+h-1)<<16) | ((dstX+w-1) & 0xffff));
OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff));
}
}
static void
Neo2090SetupForSolidFillRect(ScrnInfoPtr pScrn, int color, int rop,
unsigned int planemask)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
WAIT_FIFO(2);
/* set blt control */
OUTREG(NEOREG_BLTCNTL, nAcl->BltCntlFlags |
NEO_BC0_SRC_IS_FG |
NEO_BC3_SKIP_MAPPING |
NEO_BC3_DST_XY_ADDR |
NEO_BC3_SRC_XY_ADDR | neo2090Rop[rop]);
/* set foreground color */
OUTREG(NEOREG_FGCOLOR, color |= (color << nAcl->ColorShiftAmt));
}
static void
Neo2090SubsequentSolidFillRect(ScrnInfoPtr pScrn, int x, int y, int w, int h)
{
NEOPtr nPtr = NEOPTR(pScrn);
WAIT_FIFO(2);
OUTREG(NEOREG_DSTSTARTOFF, (y<<16) | (x & 0xffff));
OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff));
}
static void
Neo2093SetupForScanlineCPUToScreenColorExpandFill(ScrnInfoPtr pScrn,
int fg, int bg,
int rop,
unsigned int planemask)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
if (bg == -1) {
/* transparent setup */
WAIT_FIFO(2);
OUTREG(NEOREG_BLTCNTL, nAcl->BltCntlFlags |
NEO_BC0_SYS_TO_VID |
NEO_BC0_SRC_MONO |
NEO_BC0_SRC_TRANS |
NEO_BC3_SKIP_MAPPING |
NEO_BC3_DST_XY_ADDR | neo2090Rop[rop]);
OUTREG(NEOREG_FGCOLOR, fg |= (fg << nAcl->ColorShiftAmt));
}
else {
/* opaque setup */
WAIT_FIFO(3);
OUTREG(NEOREG_BLTCNTL, nAcl->BltCntlFlags |
NEO_BC0_SYS_TO_VID |
NEO_BC0_SRC_MONO |
NEO_BC3_SKIP_MAPPING |
NEO_BC3_DST_XY_ADDR | neo2090Rop[rop]);
OUTREG(NEOREG_FGCOLOR, fg |= (fg << nAcl->ColorShiftAmt));
OUTREG(NEOREG_BGCOLOR, bg |= (bg << nAcl->ColorShiftAmt));
}
}
static void
Neo2093SubsequentScanlineCPUToScreenColorExpandFill(ScrnInfoPtr pScrn,
int x, int y,
int w, int h,
int skipleft)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
nAcl->CPUToScreenColorExpandFill_x = x;
nAcl->CPUToScreenColorExpandFill_y = y;
nAcl->CPUToScreenColorExpandFill_w = w;
nAcl->CPUToScreenColorExpandFill_h = h;
nAcl->CPUToScreenColorExpandFill_skipleft = skipleft;
WAIT_FIFO(4);
OUTREG(NEOREG_SRCBITOFF, skipleft);
OUTREG(NEOREG_SRCSTARTOFF, 0);
OUTREG(NEOREG_DSTSTARTOFF, (y<<16) | (x & 0xffff));
OUTREG(NEOREG_XYEXT, (1<<16) | (w & 0xffff));
}
static void
Neo2093SubsequentColorExpandScanline(ScrnInfoPtr pScrn, int bufno)
{
NEOPtr nPtr = NEOPTR(pScrn);
NEOACLPtr nAcl = NEOACLPTR(pScrn);
if (!(--nAcl->CPUToScreenColorExpandFill_h))
return;
WAIT_FIFO(4);
OUTREG(NEOREG_SRCBITOFF, nAcl->CPUToScreenColorExpandFill_skipleft);
OUTREG(NEOREG_SRCSTARTOFF, 0);
OUTREG(NEOREG_DSTSTARTOFF, ((++nAcl->CPUToScreenColorExpandFill_y)<<16)
| (nAcl->CPUToScreenColorExpandFill_x & 0xffff));
OUTREG(NEOREG_XYEXT, (1<<16)
| (nAcl->CPUToScreenColorExpandFill_w & 0xffff));
}
#endif
xf86-video-neomagic-1.2.9/depcomp 0000755 0001750 0001750 00000056016 12523102723 013505 0000000 0000000 #! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
scriptversion=2013-05-30.07; # UTC
# Copyright (C) 1999-2013 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Originally written by Alexandre Oliva .
case $1 in
'')
echo "$0: No command. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
Run PROGRAMS ARGS to compile a file, generating dependencies
as side-effects.
Environment variables:
depmode Dependency tracking mode.
source Source file read by 'PROGRAMS ARGS'.
object Object file output by 'PROGRAMS ARGS'.
DEPDIR directory where to store dependencies.
depfile Dependency file to output.
tmpdepfile Temporary file to use when outputting dependencies.
libtool Whether libtool is used (yes/no).
Report bugs to .
EOF
exit $?
;;
-v | --v*)
echo "depcomp $scriptversion"
exit $?
;;
esac
# Get the directory component of the given path, and save it in the
# global variables '$dir'. Note that this directory component will
# be either empty or ending with a '/' character. This is deliberate.
set_dir_from ()
{
case $1 in
*/*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
*) dir=;;
esac
}
# Get the suffix-stripped basename of the given path, and save it the
# global variable '$base'.
set_base_from ()
{
base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
}
# If no dependency file was actually created by the compiler invocation,
# we still have to create a dummy depfile, to avoid errors with the
# Makefile "include basename.Plo" scheme.
make_dummy_depfile ()
{
echo "#dummy" > "$depfile"
}
# Factor out some common post-processing of the generated depfile.
# Requires the auxiliary global variable '$tmpdepfile' to be set.
aix_post_process_depfile ()
{
# If the compiler actually managed to produce a dependency file,
# post-process it.
if test -f "$tmpdepfile"; then
# Each line is of the form 'foo.o: dependency.h'.
# Do two passes, one to just change these to
# $object: dependency.h
# and one to simply output
# dependency.h:
# which is needed to avoid the deleted-header problem.
{ sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
} > "$depfile"
rm -f "$tmpdepfile"
else
make_dummy_depfile
fi
}
# A tabulation character.
tab=' '
# A newline character.
nl='
'
# Character ranges might be problematic outside the C locale.
# These definitions help.
upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
lower=abcdefghijklmnopqrstuvwxyz
digits=0123456789
alpha=${upper}${lower}
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
fi
# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
depfile=${depfile-`echo "$object" |
sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
# Avoid interferences from the environment.
gccflag= dashmflag=
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
# here, because this file can only contain one case statement.
if test "$depmode" = hp; then
# HP compiler uses -M and no extra arg.
gccflag=-M
depmode=gcc
fi
if test "$depmode" = dashXmstdout; then
# This is just like dashmstdout with a different argument.
dashmflag=-xM
depmode=dashmstdout
fi
cygpath_u="cygpath -u -f -"
if test "$depmode" = msvcmsys; then
# This is just like msvisualcpp but w/o cygpath translation.
# Just convert the backslash-escaped backslashes to single forward
# slashes to satisfy depend.m4
cygpath_u='sed s,\\\\,/,g'
depmode=msvisualcpp
fi
if test "$depmode" = msvc7msys; then
# This is just like msvc7 but w/o cygpath translation.
# Just convert the backslash-escaped backslashes to single forward
# slashes to satisfy depend.m4
cygpath_u='sed s,\\\\,/,g'
depmode=msvc7
fi
if test "$depmode" = xlc; then
# IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
gccflag=-qmakedep=gcc,-MF
depmode=gcc
fi
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
## Unfortunately, FreeBSD c89 acceptance of flags depends upon
## the command line argument order; so add the flags where they
## appear in depend2.am. Note that the slowdown incurred here
## affects only configure: in makefiles, %FASTDEP% shortcuts this.
for arg
do
case $arg in
-c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
*) set fnord "$@" "$arg" ;;
esac
shift # fnord
shift # $arg
done
"$@"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
mv "$tmpdepfile" "$depfile"
;;
gcc)
## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
## (see the conditional assignment to $gccflag above).
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
## -MM, not -M (despite what the docs say). Also, it might not be
## supported by the other compilers which use the 'gcc' depmode.
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
gccflag=-MD,
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
# The second -e expression handles DOS-style file names with drive
# letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the "deleted header file" problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
## Some versions of gcc put a space before the ':'. On the theory
## that the space means something, we add a space to the output as
## well. hp depmode also adds that space, but also prefixes the VPATH
## to the object. Take care to not repeat it in the output.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
sgi)
if test "$libtool" = yes; then
"$@" "-Wp,-MDupdate,$tmpdepfile"
else
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
# the IRIX cc adds comments like '#:fec' to the end of the
# dependency line.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
| tr "$nl" ' ' >> "$depfile"
echo >> "$depfile"
# The second pass generates a dummy entry for each header file.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
>> "$depfile"
else
make_dummy_depfile
fi
rm -f "$tmpdepfile"
;;
xlc)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. In older versions, this file always lives in the
# current directory. Also, the AIX compiler puts '$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.u
tmpdepfile2=$base.u
tmpdepfile3=$dir.libs/$base.u
"$@" -Wc,-M
else
tmpdepfile1=$dir$base.u
tmpdepfile2=$dir$base.u
tmpdepfile3=$dir$base.u
"$@" -M
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
do
test -f "$tmpdepfile" && break
done
aix_post_process_depfile
;;
tcc)
# tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
# FIXME: That version still under development at the moment of writing.
# Make that this statement remains true also for stable, released
# versions.
# It will wrap lines (doesn't matter whether long or short) with a
# trailing '\', as in:
#
# foo.o : \
# foo.c \
# foo.h \
#
# It will put a trailing '\' even on the last line, and will use leading
# spaces rather than leading tabs (at least since its commit 0394caf7
# "Emit spaces for -MD").
"$@" -MD -MF "$tmpdepfile"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
# Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
# We have to change lines of the first kind to '$object: \'.
sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
# And for each line of the second kind, we have to emit a 'dep.h:'
# dummy dependency, to avoid the deleted-header problem.
sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
rm -f "$tmpdepfile"
;;
## The order of this option in the case statement is important, since the
## shell code in configure will try each of these formats in the order
## listed in this file. A plain '-MD' option would be understood by many
## compilers, so we must ensure this comes after the gcc and icc options.
pgcc)
# Portland's C compiler understands '-MD'.
# Will always output deps to 'file.d' where file is the root name of the
# source file under compilation, even if file resides in a subdirectory.
# The object file name does not affect the name of the '.d' file.
# pgcc 10.2 will output
# foo.o: sub/foo.c sub/foo.h
# and will wrap long lines using '\' :
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
set_dir_from "$object"
# Use the source, not the object, to determine the base name, since
# that's sadly what pgcc will do too.
set_base_from "$source"
tmpdepfile=$base.d
# For projects that build the same source file twice into different object
# files, the pgcc approach of using the *source* file root name can cause
# problems in parallel builds. Use a locking strategy to avoid stomping on
# the same $tmpdepfile.
lockdir=$base.d-lock
trap "
echo '$0: caught signal, cleaning up...' >&2
rmdir '$lockdir'
exit 1
" 1 2 13 15
numtries=100
i=$numtries
while test $i -gt 0; do
# mkdir is a portable test-and-set.
if mkdir "$lockdir" 2>/dev/null; then
# This process acquired the lock.
"$@" -MD
stat=$?
# Release the lock.
rmdir "$lockdir"
break
else
# If the lock is being held by a different process, wait
# until the winning process is done or we timeout.
while test -d "$lockdir" && test $i -gt 0; do
sleep 1
i=`expr $i - 1`
done
fi
i=`expr $i - 1`
done
trap - 1 2 13 15
if test $i -le 0; then
echo "$0: failed to acquire lock after $numtries attempts" >&2
echo "$0: check lockdir '$lockdir'" >&2
exit 1
fi
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
# Each line is of the form `foo.o: dependent.h',
# or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this invocation
# correctly. Breaking it into two sed invocations is a workaround.
sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp2)
# The "hp" stanza above does not work with aCC (C++) and HP's ia64
# compilers, which have integrated preprocessors. The correct option
# to use with these is +Maked; it writes dependencies to a file named
# 'foo.d', which lands next to the object file, wherever that
# happens to be.
# Much of this is similar to the tru64 case; see comments there.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir.libs/$base.d
"$@" -Wc,+Maked
else
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir$base.d
"$@" +Maked
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
do
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
# Add 'dependent.h:' lines.
sed -ne '2,${
s/^ *//
s/ \\*$//
s/$/:/
p
}' "$tmpdepfile" >> "$depfile"
else
make_dummy_depfile
fi
rm -f "$tmpdepfile" "$tmpdepfile2"
;;
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
# dependencies in 'foo.d' instead, so we check for that too.
# Subdirectories are respected.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
# Libtool generates 2 separate objects for the 2 libraries. These
# two compilations output dependencies in $dir.libs/$base.o.d and
# in $dir$base.o.d. We have to check for both files, because
# one of the two compilations can be disabled. We should prefer
# $dir$base.o.d over $dir.libs/$base.o.d because the latter is
# automatically cleaned when .libs/ is deleted, while ignoring
# the former would cause a distcleancheck panic.
tmpdepfile1=$dir$base.o.d # libtool 1.5
tmpdepfile2=$dir.libs/$base.o.d # Likewise.
tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
"$@" -Wc,-MD
else
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir$base.d
tmpdepfile3=$dir$base.d
"$@" -MD
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
do
test -f "$tmpdepfile" && break
done
# Same post-processing that is required for AIX mode.
aix_post_process_depfile
;;
msvc7)
if test "$libtool" = yes; then
showIncludes=-Wc,-showIncludes
else
showIncludes=-showIncludes
fi
"$@" $showIncludes > "$tmpdepfile"
stat=$?
grep -v '^Note: including file: ' "$tmpdepfile"
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
# The first sed program below extracts the file names and escapes
# backslashes for cygpath. The second sed program outputs the file
# name when reading, but also accumulates all include files in the
# hold buffer in order to output them again at the end. This only
# works with sed implementations that can handle large buffers.
sed < "$tmpdepfile" -n '
/^Note: including file: *\(.*\)/ {
s//\1/
s/\\/\\\\/g
p
}' | $cygpath_u | sort -u | sed -n '
s/ /\\ /g
s/\(.*\)/'"$tab"'\1 \\/p
s/.\(.*\) \\/\1:/
H
$ {
s/.*/'"$tab"'/
G
p
}' >> "$depfile"
echo >> "$depfile" # make sure the fragment doesn't end with a backslash
rm -f "$tmpdepfile"
;;
msvc7msys)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
#nosideeffect)
# This comment above is used by automake to tell side-effect
# dependency tracking mechanisms from slower ones.
dashmstdout)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout, regardless of -o.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# Remove '-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
test -z "$dashmflag" && dashmflag=-M
# Require at least two characters before searching for ':'
# in the target name. This is to cope with DOS-style filenames:
# a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
"$@" $dashmflag |
sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this sed invocation
# correctly. Breaking it into two sed invocations is a workaround.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
dashXmstdout)
# This case only exists to satisfy depend.m4. It is never actually
# run, as this mode is specially recognized in the preamble.
exit 1
;;
makedepend)
"$@" || exit $?
# Remove any Libtool call
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# X makedepend
shift
cleared=no eat=no
for arg
do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
if test $eat = yes; then
eat=no
continue
fi
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
# Strip any option that makedepend may not understand. Remove
# the object too, otherwise makedepend will parse it as a source file.
-arch)
eat=yes ;;
-*|$object)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
obj_suffix=`echo "$object" | sed 's/^.*\././'`
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
# makedepend may prepend the VPATH from the source file name to the object.
# No need to regex-escape $object, excess matching of '.' is harmless.
sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process the last invocation
# correctly. Breaking it into two sed invocations is a workaround.
sed '1,2d' "$tmpdepfile" \
| tr ' ' "$nl" \
| sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
cpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# Remove '-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
"$@" -E \
| sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
| sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
IFS=" "
for arg
do
case "$arg" in
-o)
shift
;;
$object)
shift
;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
shift
;;
*)
set fnord "$@" "$arg"
shift
shift
;;
esac
done
"$@" -E 2>/dev/null |
sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
echo "$tab" >> "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvcmsys)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
none)
exec "$@"
;;
*)
echo "Unknown depmode $depmode" 1>&2
exit 1
;;
esac
exit 0
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:
xf86-video-neomagic-1.2.9/install-sh 0000755 0001750 0001750 00000033255 12523102723 014134 0000000 0000000 #!/bin/sh
# install - install a program, script, or datafile
scriptversion=2011-11-20.07; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# 'make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.
nl='
'
IFS=" "" $nl"
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-}
if test -z "$doit"; then
doit_exec=exec
else
doit_exec=$doit
fi
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
chgrpprog=${CHGRPPROG-chgrp}
chmodprog=${CHMODPROG-chmod}
chownprog=${CHOWNPROG-chown}
cmpprog=${CMPPROG-cmp}
cpprog=${CPPROG-cp}
mkdirprog=${MKDIRPROG-mkdir}
mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
posix_glob='?'
initialize_posix_glob='
test "$posix_glob" != "?" || {
if (set -f) 2>/dev/null; then
posix_glob=
else
posix_glob=:
fi
}
'
posix_mkdir=
# Desired mode of installed file.
mode=0755
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
mvcmd=$mvprog
rmcmd="$rmprog -f"
stripcmd=
src=
dst=
dir_arg=
dst_arg=
copy_on_change=false
no_target_directory=
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
--help display this help and exit.
--version display version info and exit.
-c (ignored)
-C install only if different (preserve the last data modification time)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
RMPROG STRIPPROG
"
while test $# -ne 0; do
case $1 in
-c) ;;
-C) copy_on_change=true;;
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
case $mode in
*' '* | *' '* | *'
'* | *'*'* | *'?'* | *'['*)
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
shift;;
-o) chowncmd="$chownprog $2"
shift;;
-s) stripcmd=$stripprog;;
-t) dst_arg=$2
# Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
shift;;
-T) no_target_directory=true;;
--version) echo "$0 $scriptversion"; exit $?;;
--) shift
break;;
-*) echo "$0: invalid option: $1" >&2
exit 1;;
*) break;;
esac
shift
done
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dst_arg"; then
# $@ is not empty: it contains at least $arg.
set fnord "$@" "$dst_arg"
shift # fnord
fi
shift # arg
dst_arg=$arg
# Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
done
fi
if test $# -eq 0; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
fi
# It's OK to call 'install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
if test -z "$dir_arg"; then
do_exit='(exit $ret); exit $ret'
trap "ret=129; $do_exit" 1
trap "ret=130; $do_exit" 2
trap "ret=141; $do_exit" 13
trap "ret=143; $do_exit" 15
# Set umask so as not to create temps with too-generous modes.
# However, 'strip' requires both read and write access to temps.
case $mode in
# Optimize common cases.
*644) cp_umask=133;;
*755) cp_umask=22;;
*[0-7])
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
fi
for src
do
# Protect names problematic for 'test' and other utilities.
case $src in
-* | [=\(\)!]) src=./$src;;
esac
if test -n "$dir_arg"; then
dst=$src
dstdir=$dst
test -d "$dstdir"
dstdir_status=$?
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then
echo "$0: $src does not exist." >&2
exit 1
fi
if test -z "$dst_arg"; then
echo "$0: no destination specified." >&2
exit 1
fi
dst=$dst_arg
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
echo "$0: $dst_arg: Is a directory" >&2
exit 1
fi
dstdir=$dst
dst=$dstdir/`basename "$src"`
dstdir_status=0
else
# Prefer dirname, but fall back on a substitute if dirname fails.
dstdir=`
(dirname "$dst") 2>/dev/null ||
expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$dst" : 'X\(//\)[^/]' \| \
X"$dst" : 'X\(//\)$' \| \
X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$dst" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'
`
test -d "$dstdir"
dstdir_status=$?
fi
fi
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
# Create intermediate dirs using mode 755 as modified by the umask.
# This is like FreeBSD 'install' as of 1997-10-28.
umask=`umask`
case $stripcmd.$umask in
# Optimize common cases.
*[2367][2367]) mkdir_umask=$umask;;
.*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
*[0-7])
mkdir_umask=`expr $umask + 22 \
- $umask % 100 % 40 + $umask % 20 \
- $umask % 10 % 4 + $umask % 2
`;;
*) mkdir_umask=$umask,go-w;;
esac
# With -d, create the new directory with the user-specified mode.
# Otherwise, rely on $mkdir_umask.
if test -n "$dir_arg"; then
mkdir_mode=-m$mode
else
mkdir_mode=
fi
posix_mkdir=false
case $umask in
*[123567][0-7][0-7])
# POSIX mkdir -p sets u+wx bits regardless of umask, which
# is incompatible with FreeBSD 'install' when (umask & 300) != 0.
;;
*)
tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
if (umask $mkdir_umask &&
exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
then
if test -z "$dir_arg" || {
# Check for POSIX incompatibilities with -m.
# HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
# other-writable bit of parent directory when it shouldn't.
# FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
ls_ld_tmpdir=`ls -ld "$tmpdir"`
case $ls_ld_tmpdir in
d????-?r-*) different_mode=700;;
d????-?--*) different_mode=755;;
*) false;;
esac &&
$mkdirprog -m$different_mode -p -- "$tmpdir" && {
ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
}
}
then posix_mkdir=:
fi
rmdir "$tmpdir/d" "$tmpdir"
else
# Remove any dirs left behind by ancient mkdir implementations.
rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
fi
trap '' 0;;
esac;;
esac
if
$posix_mkdir && (
umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
# The umask is ridiculous, or mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
/*) prefix='/';;
[-=\(\)!]*) prefix='./';;
*) prefix='';;
esac
eval "$initialize_posix_glob"
oIFS=$IFS
IFS=/
$posix_glob set -f
set fnord $dstdir
shift
$posix_glob set +f
IFS=$oIFS
prefixes=
for d
do
test X"$d" = X && continue
prefix=$prefix$d
if test -d "$prefix"; then
prefixes=
else
if $posix_mkdir; then
(umask=$mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
# Don't fail if two instances are running concurrently.
test -d "$prefix" || exit 1
else
case $prefix in
*\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
*) qprefix=$prefix;;
esac
prefixes="$prefixes '$qprefix'"
fi
fi
prefix=$prefix/
done
if test -n "$prefixes"; then
# Don't fail if two instances are running concurrently.
(umask $mkdir_umask &&
eval "\$doit_exec \$mkdirprog $prefixes") ||
test -d "$dstdir" || exit 1
obsolete_mkdir_used=true
fi
fi
fi
if test -n "$dir_arg"; then
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
{ test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name.
(umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
{ test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
{ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
eval "$initialize_posix_glob" &&
$posix_glob set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
$posix_glob set +f &&
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
rm -f "$dsttmp"
else
# Rename the file to the real destination.
$doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
# Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
test ! -f "$dst" ||
$doit $rmcmd -f "$dst" 2>/dev/null ||
{ $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
{ $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
} ||
{ echo "$0: cannot unlink or rename $dst" >&2
(exit 1); exit 1
}
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
trap '' 0
fi
done
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:
xf86-video-neomagic-1.2.9/config.guess 0000755 0001750 0001750 00000123550 12523102723 014446 0000000 0000000 #! /bin/sh
# Attempt to guess a canonical system name.
# Copyright 1992-2014 Free Software Foundation, Inc.
timestamp='2014-03-23'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see .
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that
# program. This Exception is an additional permission under section 7
# of the GNU General Public License, version 3 ("GPLv3").
#
# Originally written by Per Bothner.
#
# You can get the latest version of this script from:
# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
#
# Please send patches with a ChangeLog entry to config-patches@gnu.org.
me=`echo "$0" | sed -e 's,.*/,,'`
usage="\
Usage: $0 [OPTION]
Output the configuration name of the system \`$me' is run on.
Operation modes:
-h, --help print this help, then exit
-t, --time-stamp print date of last modification, then exit
-v, --version print version number, then exit
Report bugs and patches to ."
version="\
GNU config.guess ($timestamp)
Originally written by Per Bothner.
Copyright 1992-2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
help="
Try \`$me --help' for more information."
# Parse command line
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
echo "$timestamp" ; exit ;;
--version | -v )
echo "$version" ; exit ;;
--help | --h* | -h )
echo "$usage"; exit ;;
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
break ;;
-* )
echo "$me: invalid option $1$help" >&2
exit 1 ;;
* )
break ;;
esac
done
if test $# != 0; then
echo "$me: too many arguments$help" >&2
exit 1
fi
trap 'exit 1' 1 2 15
# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
# compiler to aid in system detection is discouraged as it requires
# temporary files to be created and, as you can see below, it is a
# headache to deal with in a portable fashion.
# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
# use `HOST_CC' if defined, but it is deprecated.
# Portable tmp directory creation inspired by the Autoconf team.
set_cc_for_build='
trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
: ${TMPDIR=/tmp} ;
{ tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
{ test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
{ tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
{ echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
dummy=$tmp/dummy ;
tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
case $CC_FOR_BUILD,$HOST_CC,$CC in
,,) echo "int x;" > $dummy.c ;
for c in cc gcc c89 c99 ; do
if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
CC_FOR_BUILD="$c"; break ;
fi ;
done ;
if test x"$CC_FOR_BUILD" = x ; then
CC_FOR_BUILD=no_compiler_found ;
fi
;;
,,*) CC_FOR_BUILD=$CC ;;
,*,*) CC_FOR_BUILD=$HOST_CC ;;
esac ; set_cc_for_build= ;'
# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (ghazi@noc.rutgers.edu 1994-08-24)
if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
PATH=$PATH:/.attbin ; export PATH
fi
UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
case "${UNAME_SYSTEM}" in
Linux|GNU|GNU/*)
# If the system lacks a compiler, then just pick glibc.
# We could probably try harder.
LIBC=gnu
eval $set_cc_for_build
cat <<-EOF > $dummy.c
#include
#if defined(__UCLIBC__)
LIBC=uclibc
#elif defined(__dietlibc__)
LIBC=dietlibc
#else
LIBC=gnu
#endif
EOF
eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
;;
esac
# Note: order is significant - the case branches are not exclusive.
case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
*:NetBSD:*:*)
# NetBSD (nbsd) targets should (where applicable) match one or
# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
# *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
# switched to ELF, *-*-netbsd* would select the old
# object file format. This provides both forward
# compatibility and a consistent mechanism for selecting the
# object file format.
#
# Note: NetBSD doesn't particularly care about the vendor
# portion of the name. We always set it to "unknown".
sysctl="sysctl -n hw.machine_arch"
UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
/usr/sbin/$sysctl 2>/dev/null || echo unknown)`
case "${UNAME_MACHINE_ARCH}" in
armeb) machine=armeb-unknown ;;
arm*) machine=arm-unknown ;;
sh3el) machine=shl-unknown ;;
sh3eb) machine=sh-unknown ;;
sh5el) machine=sh5le-unknown ;;
*) machine=${UNAME_MACHINE_ARCH}-unknown ;;
esac
# The Operating System including object format, if it has switched
# to ELF recently, or will in the future.
case "${UNAME_MACHINE_ARCH}" in
arm*|i386|m68k|ns32k|sh3*|sparc|vax)
eval $set_cc_for_build
if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ELF__
then
# Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
# Return netbsd for either. FIX?
os=netbsd
else
os=netbsdelf
fi
;;
*)
os=netbsd
;;
esac
# The OS release
# Debian GNU/NetBSD machines have a different userland, and
# thus, need a distinct triplet. However, they do not need
# kernel version information, so it can be replaced with a
# suitable tag, in the style of linux-gnu.
case "${UNAME_VERSION}" in
Debian*)
release='-gnu'
;;
*)
release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
;;
esac
# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
# contains redundant information, the shorter form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
echo "${machine}-${os}${release}"
exit ;;
*:Bitrig:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
exit ;;
*:OpenBSD:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
exit ;;
*:ekkoBSD:*:*)
echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
exit ;;
*:SolidBSD:*:*)
echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
exit ;;
macppc:MirBSD:*:*)
echo powerpc-unknown-mirbsd${UNAME_RELEASE}
exit ;;
*:MirBSD:*:*)
echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
exit ;;
alpha:OSF1:*:*)
case $UNAME_RELEASE in
*4.0)
UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
;;
*5.*)
UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
;;
esac
# According to Compaq, /usr/sbin/psrinfo has been available on
# OSF/1 and Tru64 systems produced since 1995. I hope that
# covers most systems running today. This code pipes the CPU
# types through head -n 1, so we only detect the type of CPU 0.
ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
case "$ALPHA_CPU_TYPE" in
"EV4 (21064)")
UNAME_MACHINE="alpha" ;;
"EV4.5 (21064)")
UNAME_MACHINE="alpha" ;;
"LCA4 (21066/21068)")
UNAME_MACHINE="alpha" ;;
"EV5 (21164)")
UNAME_MACHINE="alphaev5" ;;
"EV5.6 (21164A)")
UNAME_MACHINE="alphaev56" ;;
"EV5.6 (21164PC)")
UNAME_MACHINE="alphapca56" ;;
"EV5.7 (21164PC)")
UNAME_MACHINE="alphapca57" ;;
"EV6 (21264)")
UNAME_MACHINE="alphaev6" ;;
"EV6.7 (21264A)")
UNAME_MACHINE="alphaev67" ;;
"EV6.8CB (21264C)")
UNAME_MACHINE="alphaev68" ;;
"EV6.8AL (21264B)")
UNAME_MACHINE="alphaev68" ;;
"EV6.8CX (21264D)")
UNAME_MACHINE="alphaev68" ;;
"EV6.9A (21264/EV69A)")
UNAME_MACHINE="alphaev69" ;;
"EV7 (21364)")
UNAME_MACHINE="alphaev7" ;;
"EV7.9 (21364A)")
UNAME_MACHINE="alphaev79" ;;
esac
# A Pn.n version is a patched version.
# A Vn.n version is a released version.
# A Tn.n version is a released field test version.
# A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
exitcode=$?
trap '' 0
exit $exitcode ;;
Alpha\ *:Windows_NT*:*)
# How do we know it's Interix rather than the generic POSIX subsystem?
# Should we change UNAME_MACHINE based on the output of uname instead
# of the specific Alpha model?
echo alpha-pc-interix
exit ;;
21064:Windows_NT:50:3)
echo alpha-dec-winnt3.5
exit ;;
Amiga*:UNIX_System_V:4.0:*)
echo m68k-unknown-sysv4
exit ;;
*:[Aa]miga[Oo][Ss]:*:*)
echo ${UNAME_MACHINE}-unknown-amigaos
exit ;;
*:[Mm]orph[Oo][Ss]:*:*)
echo ${UNAME_MACHINE}-unknown-morphos
exit ;;
*:OS/390:*:*)
echo i370-ibm-openedition
exit ;;
*:z/VM:*:*)
echo s390-ibm-zvmoe
exit ;;
*:OS400:*:*)
echo powerpc-ibm-os400
exit ;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
echo arm-acorn-riscix${UNAME_RELEASE}
exit ;;
arm*:riscos:*:*|arm*:RISCOS:*:*)
echo arm-unknown-riscos
exit ;;
SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
echo hppa1.1-hitachi-hiuxmpp
exit ;;
Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
if test "`(/bin/universe) 2>/dev/null`" = att ; then
echo pyramid-pyramid-sysv3
else
echo pyramid-pyramid-bsd
fi
exit ;;
NILE*:*:*:dcosx)
echo pyramid-pyramid-svr4
exit ;;
DRS?6000:unix:4.0:6*)
echo sparc-icl-nx6
exit ;;
DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
case `/usr/bin/uname -p` in
sparc) echo sparc-icl-nx7; exit ;;
esac ;;
s390x:SunOS:*:*)
echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit ;;
sun4H:SunOS:5.*:*)
echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit ;;
sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit ;;
i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
echo i386-pc-auroraux${UNAME_RELEASE}
exit ;;
i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
eval $set_cc_for_build
SUN_ARCH="i386"
# If there is a compiler, see if it is configured for 64-bit objects.
# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
# This test works for both compilers.
if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
grep IS_64BIT_ARCH >/dev/null
then
SUN_ARCH="x86_64"
fi
fi
echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit ;;
sun4*:SunOS:6*:*)
# According to config.sub, this is the proper way to canonicalize
# SunOS6. Hard to guess exactly what SunOS6 will be like, but
# it's likely to be more like Solaris than SunOS4.
echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit ;;
sun4*:SunOS:*:*)
case "`/usr/bin/arch -k`" in
Series*|S4*)
UNAME_RELEASE=`uname -v`
;;
esac
# Japanese Language versions have a version number like `4.1.3-JL'.
echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
exit ;;
sun3*:SunOS:*:*)
echo m68k-sun-sunos${UNAME_RELEASE}
exit ;;
sun*:*:4.2BSD:*)
UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
case "`/bin/arch`" in
sun3)
echo m68k-sun-sunos${UNAME_RELEASE}
;;
sun4)
echo sparc-sun-sunos${UNAME_RELEASE}
;;
esac
exit ;;
aushp:SunOS:*:*)
echo sparc-auspex-sunos${UNAME_RELEASE}
exit ;;
# The situation for MiNT is a little confusing. The machine name
# can be virtually everything (everything which is not
# "atarist" or "atariste" at least should have a processor
# > m68000). The system name ranges from "MiNT" over "FreeMiNT"
# to the lowercase version "mint" (or "freemint"). Finally
# the system name "TOS" denotes a system which is actually not
# MiNT. But MiNT is downward compatible to TOS, so this should
# be no problem.
atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
exit ;;
atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
exit ;;
*falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
exit ;;
milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
echo m68k-milan-mint${UNAME_RELEASE}
exit ;;
hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
echo m68k-hades-mint${UNAME_RELEASE}
exit ;;
*:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
echo m68k-unknown-mint${UNAME_RELEASE}
exit ;;
m68k:machten:*:*)
echo m68k-apple-machten${UNAME_RELEASE}
exit ;;
powerpc:machten:*:*)
echo powerpc-apple-machten${UNAME_RELEASE}
exit ;;
RISC*:Mach:*:*)
echo mips-dec-mach_bsd4.3
exit ;;
RISC*:ULTRIX:*:*)
echo mips-dec-ultrix${UNAME_RELEASE}
exit ;;
VAX*:ULTRIX*:*:*)
echo vax-dec-ultrix${UNAME_RELEASE}
exit ;;
2020:CLIX:*:* | 2430:CLIX:*:*)
echo clipper-intergraph-clix${UNAME_RELEASE}
exit ;;
mips:*:*:UMIPS | mips:*:*:RISCos)
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
#ifdef __cplusplus
#include /* for printf() prototype */
int main (int argc, char *argv[]) {
#else
int main (argc, argv) int argc; char *argv[]; {
#endif
#if defined (host_mips) && defined (MIPSEB)
#if defined (SYSTYPE_SYSV)
printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
#endif
#if defined (SYSTYPE_SVR4)
printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
#endif
#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
#endif
#endif
exit (-1);
}
EOF
$CC_FOR_BUILD -o $dummy $dummy.c &&
dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
SYSTEM_NAME=`$dummy $dummyarg` &&
{ echo "$SYSTEM_NAME"; exit; }
echo mips-mips-riscos${UNAME_RELEASE}
exit ;;
Motorola:PowerMAX_OS:*:*)
echo powerpc-motorola-powermax
exit ;;
Motorola:*:4.3:PL8-*)
echo powerpc-harris-powermax
exit ;;
Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
echo powerpc-harris-powermax
exit ;;
Night_Hawk:Power_UNIX:*:*)
echo powerpc-harris-powerunix
exit ;;
m88k:CX/UX:7*:*)
echo m88k-harris-cxux7
exit ;;
m88k:*:4*:R4*)
echo m88k-motorola-sysv4
exit ;;
m88k:*:3*:R3*)
echo m88k-motorola-sysv3
exit ;;
AViiON:dgux:*:*)
# DG/UX returns AViiON for all architectures
UNAME_PROCESSOR=`/usr/bin/uname -p`
if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
then
if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
[ ${TARGET_BINARY_INTERFACE}x = x ]
then
echo m88k-dg-dgux${UNAME_RELEASE}
else
echo m88k-dg-dguxbcs${UNAME_RELEASE}
fi
else
echo i586-dg-dgux${UNAME_RELEASE}
fi
exit ;;
M88*:DolphinOS:*:*) # DolphinOS (SVR3)
echo m88k-dolphin-sysv3
exit ;;
M88*:*:R3*:*)
# Delta 88k system running SVR3
echo m88k-motorola-sysv3
exit ;;
XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
echo m88k-tektronix-sysv3
exit ;;
Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
echo m68k-tektronix-bsd
exit ;;
*:IRIX*:*:*)
echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
exit ;;
????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
i*86:AIX:*:*)
echo i386-ibm-aix
exit ;;
ia64:AIX:*:*)
if [ -x /usr/bin/oslevel ] ; then
IBM_REV=`/usr/bin/oslevel`
else
IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
fi
echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
exit ;;
*:AIX:2:3)
if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
#include
main()
{
if (!__power_pc())
exit(1);
puts("powerpc-ibm-aix3.2.5");
exit(0);
}
EOF
if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
then
echo "$SYSTEM_NAME"
else
echo rs6000-ibm-aix3.2.5
fi
elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
echo rs6000-ibm-aix3.2.4
else
echo rs6000-ibm-aix3.2
fi
exit ;;
*:AIX:*:[4567])
IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
IBM_ARCH=rs6000
else
IBM_ARCH=powerpc
fi
if [ -x /usr/bin/oslevel ] ; then
IBM_REV=`/usr/bin/oslevel`
else
IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
fi
echo ${IBM_ARCH}-ibm-aix${IBM_REV}
exit ;;
*:AIX:*:*)
echo rs6000-ibm-aix
exit ;;
ibmrt:4.4BSD:*|romp-ibm:BSD:*)
echo romp-ibm-bsd4.4
exit ;;
ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
exit ;; # report: romp-ibm BSD 4.3
*:BOSX:*:*)
echo rs6000-bull-bosx
exit ;;
DPX/2?00:B.O.S.:*:*)
echo m68k-bull-sysv3
exit ;;
9000/[34]??:4.3bsd:1.*:*)
echo m68k-hp-bsd
exit ;;
hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
echo m68k-hp-bsd4.4
exit ;;
9000/[34678]??:HP-UX:*:*)
HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
case "${UNAME_MACHINE}" in
9000/31? ) HP_ARCH=m68000 ;;
9000/[34]?? ) HP_ARCH=m68k ;;
9000/[678][0-9][0-9])
if [ -x /usr/bin/getconf ]; then
sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
case "${sc_cpu_version}" in
523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
532) # CPU_PA_RISC2_0
case "${sc_kernel_bits}" in
32) HP_ARCH="hppa2.0n" ;;
64) HP_ARCH="hppa2.0w" ;;
'') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
esac ;;
esac
fi
if [ "${HP_ARCH}" = "" ]; then
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
#define _HPUX_SOURCE
#include