pax_global_header00006660000000000000000000000064151660115260014515gustar00rootroot0000000000000052 comment=77e1ce5d6dee871c49ef211222ba18ef0c486bda libsodium-1.0.22-RELEASE/000077500000000000000000000000001516601152600146445ustar00rootroot00000000000000libsodium-1.0.22-RELEASE/.github/000077500000000000000000000000001516601152600162045ustar00rootroot00000000000000libsodium-1.0.22-RELEASE/.github/workflows/000077500000000000000000000000001516601152600202415ustar00rootroot00000000000000libsodium-1.0.22-RELEASE/.github/workflows/autocloser.yml000066400000000000000000000012551516601152600231470ustar00rootroot00000000000000name: Autocloser on: [issues] jobs: autoclose: runs-on: ubuntu-latest steps: - name: Autoclose issues that did not follow issue template uses: roots/issue-closer@v1.2 with: repo-token: ${{ secrets.GITHUB_TOKEN }} issue-close-message: "This issue was automatically closed because it did not follow the issue template. We use the issue tracker exclusively for bug reports and feature additions that have been previously discussed. However, this issue appears to be a support request. Please use the discussion forums for support requests." issue-pattern: ".*(do we replicate the issue|Expected behavior|raised as discussion|# Impact).*" libsodium-1.0.22-RELEASE/.github/workflows/ci.yml000066400000000000000000000201051516601152600213550ustar00rootroot00000000000000name: CI on: push: branches: [master, stable, next] pull_request: branches: [master, stable, next] workflow_dispatch: jobs: version-consistency: runs-on: ubuntu-latest steps: - uses: actions/checkout@v6 - name: Check version consistency run: ./test/check-version-consistency.sh tcc: runs-on: ubuntu-latest steps: - uses: actions/checkout@v6 - name: Update packages list run: sudo apt-get update - name: Install dependencies run: | sudo apt-get install -y build-essential libtool autoconf automake tcc - name: Autogen run: ./autogen.sh -s - name: Compilation with tcc run: | env CC=tcc CFLAGS='-w' CPPFLAGS="-DDEV_MODE=1" ./configure --prefix=/tmp --disable-dependency-tracking --disable-shared || cat config.log make -j $(nproc) && make check && make install env CC=tcc CPPFLAGS='-I/tmp/include' LDFLAGS='-L/tmp/lib' LD_LIBRARY_PATH='/tmp/lib' ./test/constcheck.sh make uninstall make distclean zig: runs-on: ubuntu-latest steps: - uses: actions/checkout@v6 - name: Update packages list run: sudo apt-get update - name: Install Zig uses: mlugg/setup-zig@v2 with: version: 0.15.2 - name: Autogen run: ./autogen.sh -s - name: Compilation with zig run: | zig build zig build -Dtarget=x86_64-linux zig build -Dtarget=aarch64-linux zig build -Dtarget=x86-windows zig build -Dtarget=x86_64-windows zig build -Dtarget=aarch64-windows zig build -Dtarget=x86_64-macos zig build -Dtarget=aarch64-macos zig build -Dtarget=x86_64-freebsd zig build -Dtarget=aarch64-freebsd zig build -Dtarget=wasm32-wasi zig build -Doptimize=ReleaseFast rm -fr zig-cache zig-out regular: runs-on: ubuntu-latest steps: - uses: actions/checkout@v6 - name: Update packages list run: sudo apt-get update - name: Install dependencies run: sudo apt-get install -y build-essential libtool autoconf automake - name: Autogen run: ./autogen.sh -s - name: C99 compat check run: | env CPPFLAGS="-DDEV_MODE=1" ./configure --disable-dependency-tracking make -j $(nproc) CFLAGS='-g0' > /dev/null && cp src/libsodium/.libs/libsodium.so lib.so && make clean > /dev/null && make CFLAGS='-g0' CPPFLAGS='-DDEV_MODE=1 -DSODIUM_C99\(X\)=' > /dev/null && cp src/libsodium/.libs/libsodium.so lib-oldc.so && cmp lib.so lib-oldc.so && echo No binary changes && make clean > /dev/null make distcheck make distclean > /dev/null - name: Regular compilation run: | env CPPFLAGS="-DDEV_MODE=1" ./configure --disable-dependency-tracking --enable-minimal make -j $(nproc) make check ( echo '#include ' ; echo 'int main(void) { return sodium_init(); }' ) > /tmp/main.c && gcc -DDEV_MODE=1 -Isrc/libsodium/include -Isrc/libsodium/include/sodium $(find src -name '*.c' -o -name '*.S') /tmp/main.c make distclean > /dev/null check-globals: runs-on: ubuntu-latest steps: - uses: actions/checkout@v6 - name: Update packages list run: sudo apt-get update - name: Install dependencies run: sudo apt-get install -y build-essential libtool autoconf automake - name: Autogen run: ./autogen.sh -s - name: Check globals run: | if [ -x test/rename-globals.sh ]; then test/rename-globals.sh; fi other-comp: runs-on: ubuntu-latest steps: - uses: actions/checkout@v6 - name: Update packages list run: sudo apt-get update - name: Install dependencies run: sudo apt-get install -y build-essential libtool autoconf automake clang - name: Autogen run: ./autogen.sh -s - name: Compilation with g++ run: | env CC=g++ CPPFLAGS="-DDEV_MODE=1" ./configure --disable-dependency-tracking make -j $(nproc) check make clean > /dev/null - name: Compilation with clang run: | env CC=clang CPPFLAGS="-DDEV_MODE=1" ./configure --disable-dependency-tracking make -j $(nproc) check make clean > /dev/null other-arch: runs-on: ubuntu-latest steps: - uses: actions/checkout@v6 - name: Update packages list run: sudo apt-get update - name: Install dependencies run: sudo apt-get install -y build-essential libtool autoconf automake gcc-powerpc-linux-gnu - name: Autogen run: ./autogen.sh -s - name: Big-Endian PowerPC compilation run: | env CPPFLAGS="-DDEV_MODE=1" ./configure --disable-dependency-tracking --host=powerpc-linux-gnu make -j $(nproc) make clean > /dev/null wasi: runs-on: ubuntu-latest steps: - uses: actions/checkout@v6 - name: Install Zig uses: mlugg/setup-zig@v2 with: version: master - name: Install Wasmer uses: wasmerio/setup-wasmer@v3.1 - name: Build for wasi-core run: zig build -Dtarget=wasm32-wasi -Doptimize=ReleaseSafe - name: Run tests with Wasmer run: | cd zig-out/bin failed=0 for wasm in *.wasm; do name="${wasm%.wasm}" echo "[$name]" if ! wasmer run "$wasm" --volume=./:. 2>&1; then echo "*** [$name] FAILED" >&2 failed=1 fi done exit $failed aarch64-gcc: runs-on: ubuntu-24.04-arm steps: - uses: actions/checkout@v6 - name: Update packages list run: sudo apt-get update - name: Install dependencies run: sudo apt-get install -y build-essential libtool autoconf automake - name: Autogen run: ./autogen.sh -s - name: Compilation with GCC on aarch64 run: | env CPPFLAGS="-DDEV_MODE=1" ./configure --disable-dependency-tracking make -j $(nproc) make check make distclean > /dev/null aarch64-gcc-crypto: runs-on: ubuntu-24.04-arm steps: - uses: actions/checkout@v6 - name: Update packages list run: sudo apt-get update - name: Install dependencies run: sudo apt-get install -y build-essential libtool autoconf automake - name: Autogen run: ./autogen.sh -s - name: Compilation with GCC on aarch64 with NEON and ARM Crypto extensions run: | env CFLAGS="-march=armv8-a+crypto" CPPFLAGS="-DDEV_MODE=1" ./configure --disable-dependency-tracking make -j $(nproc) make check make distclean > /dev/null aarch64-gcc-sha3: runs-on: ubuntu-24.04-arm steps: - uses: actions/checkout@v6 - name: Update packages list run: sudo apt-get update - name: Install dependencies run: sudo apt-get install -y build-essential libtool autoconf automake - name: Autogen run: ./autogen.sh -s - name: Compilation with GCC on aarch64 with NEON, ARM Crypto, and SHA3 extensions run: | env CFLAGS="-march=armv8-a+crypto+sha3" CPPFLAGS="-DDEV_MODE=1" ./configure --disable-dependency-tracking make -j $(nproc) make check make distclean > /dev/null android: runs-on: ubuntu-latest steps: - uses: actions/checkout@v6 - name: Update packages list run: sudo apt-get update - name: Install base dependencies run: sudo apt-get install -y libtool autoconf automake unzip - name: Autogen run: ./autogen.sh -s - name: Install Android NDK run: | mkdir /tmp/android && cd /tmp/android curl -o ndk.zip -L https://dl.google.com/android/repository/android-ndk-r29-linux.zip unzip ndk.zip && rm -f *.zip && mv android-ndk* ndk - name: Android compilation run: | env ANDROID_NDK_HOME=/tmp/android/ndk ./dist-build/android-aar.sh libsodium-1.0.22-RELEASE/.github/workflows/cifuzz.yml000066400000000000000000000014541516601152600223020ustar00rootroot00000000000000name: CIFuzz on: push: branches: [stable, next] pull_request: branches: [stable, next] jobs: Fuzzing: runs-on: ubuntu-latest steps: - name: Build Fuzzers id: build uses: google/oss-fuzz/infra/cifuzz/actions/build_fuzzers@master with: oss-fuzz-project-name: "libsodium" dry-run: false language: c++ - name: Run Fuzzers uses: google/oss-fuzz/infra/cifuzz/actions/run_fuzzers@master with: oss-fuzz-project-name: "libsodium" fuzz-seconds: 300 dry-run: false language: c++ - name: Upload Crash uses: actions/upload-artifact@v7 if: failure() && steps.build.outcome == 'success' with: name: artifacts path: ./out/artifacts libsodium-1.0.22-RELEASE/.github/workflows/codeql-analysis.yml000066400000000000000000000023021516601152600240510ustar00rootroot00000000000000name: "CodeQL scan" on: push: branches: [ "master stable next" ] pull_request: # The branches below must be a subset of the branches above branches: [ "master stable next" ] schedule: - cron: '0 17 * * 2' jobs: analyze: name: Analyze runs-on: ${{ (matrix.language == 'swift' && 'macos-latest') || 'ubuntu-latest' }} timeout-minutes: ${{ (matrix.language == 'swift' && 120) || 360 }} permissions: actions: read contents: read security-events: write strategy: fail-fast: false matrix: language: [ 'c-cpp' ] steps: - name: Checkout repository uses: actions/checkout@v6 with: fetch-depth: 2 # Initializes the CodeQL tools for scanning. - name: Initialize CodeQL uses: github/codeql-action/init@v4 with: languages: ${{ matrix.language }} - run: | echo "Run, Build Application using script" ./autogen.sh -s env CPPFLAGS="-DDEV_MODE=1" ./configure --disable-dependency-tracking make -j $(nproc) check - name: Perform CodeQL Analysis uses: github/codeql-action/analyze@v4 with: category: "/language:${{matrix.language}}" libsodium-1.0.22-RELEASE/.github/workflows/dotnet-core.yml000066400000000000000000000325241516601152600232150ustar00rootroot00000000000000name: .NET Package on: push: branches: - stable - next permissions: id-token: write attestations: write contents: read jobs: build-windows-msvc: runs-on: windows-latest steps: - uses: actions/checkout@v6 - name: buildbase.bat run: buildbase.bat ..\vs2022\libsodium.sln 17 working-directory: builds/msvc/build/ shell: cmd - uses: actions/upload-artifact@v7 with: name: build-win-x64 path: bin/x64/Release/v143/dynamic/libsodium.dll - uses: actions/upload-artifact@v7 with: name: build-win-x86 path: bin/Win32/Release/v143/dynamic/libsodium.dll - uses: actions/upload-artifact@v7 with: name: build-win-arm64 path: bin/ARM64/Release/v143/dynamic/libsodium.dll build-others: runs-on: ubuntu-latest steps: - name: Install Zig uses: mlugg/setup-zig@v2 with: version: master - uses: actions/checkout@v6 - name: Build Android AAR run: sh ./dist-build/android-aar.sh - name: Extract android AAR file run: | mkdir -p extracted-aar unzip libsodium-*.aar -d extracted-aar - name: Upload Android arm64 uses: actions/upload-artifact@v7 with: name: build-android-arm64 path: extracted-aar/prefab/modules/sodium/libs/android.arm64-v8a/libsodium.so - name: Upload Android arm uses: actions/upload-artifact@v7 with: name: build-android-arm path: extracted-aar/prefab/modules/sodium/libs/android.armeabi-v7a/libsodium.so - name: Upload Android x64 uses: actions/upload-artifact@v7 with: name: build-android-x64 path: extracted-aar/prefab/modules/sodium/libs/android.x86_64/libsodium.so - name: Upload Android x86 uses: actions/upload-artifact@v7 with: name: build-android-x86 path: extracted-aar/prefab/modules/sodium/libs/android.x86/libsodium.so - name: build-linux-x64 run: | rm -fr zig-out .zig-cache; zig build -Doptimize=ReleaseFast -Dtarget=x86_64-linux-gnu.2.17 - name: tests run: cd zig-out/bin && ./run.sh - uses: actions/upload-artifact@v7 with: name: build-linux-x64 path: zig-out/lib/libsodium.so - name: Set up arm and aarch64 emulation environment run: | export DEBIAN_FRONTEND=noninteractive sudo apt-get update sudo apt-get install -y build-essential qemu-system binfmt-support qemu-user-static qemu-system-arm gcc-arm-linux-gnueabihf libc6-armhf-cross gcc-aarch64-linux-gnu libc6-arm64-cross sudo dpkg --add-architecture armhf sudo update-binfmts --enable qemu-arm sudo update-binfmts --display sudo ln -s /usr/arm-linux-gnueabihf/lib/ld-linux-armhf.so.* /lib sudo dpkg --add-architecture arm64 sudo update-binfmts --enable qemu-aarch64 sudo update-binfmts --display sudo ln -s /usr/aarch64-linux-gnu/lib/ld-linux-aarch64.so.* /lib - name: build-linux-arm run: | rm -fr zig-out .zig-cache; zig build -Doptimize=ReleaseFast -Dtarget=arm-linux-gnueabihf.2.23 - name: tests run: | cd zig-out/bin && env LD_LIBRARY_PATH=/usr/arm-linux-gnueabihf/lib ./run.sh - uses: actions/upload-artifact@v7 with: name: build-linux-arm path: zig-out/lib/libsodium.so - name: build-linux-arm64 run: | rm -fr zig-out .zig-cache; zig build -Doptimize=ReleaseFast -Dtarget=aarch64-linux-gnu.2.23 - name: tests run: | cd zig-out/bin && env LD_LIBRARY_PATH=/usr/aarch64-linux-gnu/lib ./run.sh - uses: actions/upload-artifact@v7 with: name: build-linux-arm64 path: zig-out/lib/libsodium.so - name: build-linux-musl-x64 run: | rm -fr zig-out .zig-cache; zig build -Doptimize=ReleaseFast -Dtarget=x86_64-linux-musl - uses: actions/upload-artifact@v7 with: name: build-linux-musl-x64 path: zig-out/lib/libsodium.so - name: build-linux-musl-arm run: | rm -fr zig-out .zig-cache; zig build -Doptimize=ReleaseFast -Dtarget=arm-linux-musleabihf - uses: actions/upload-artifact@v7 with: name: build-linux-musl-arm path: zig-out/lib/libsodium.so - name: build-linux-musl-arm64 run: | rm -fr zig-out .zig-cache; zig build -Doptimize=ReleaseFast -Dtarget=aarch64-linux-musl - uses: actions/upload-artifact@v7 with: name: build-linux-musl-arm64 path: zig-out/lib/libsodium.so build-apple: runs-on: macos-latest steps: - uses: actions/checkout@v6 - name: configure run: ./configure - name: build-xcframework run: env LIBSODIUM_FULL_BUILD=1 LIBSODIUM_SKIP_SIMULATORS=1 dist-build/apple-xcframework.sh - uses: actions/upload-artifact@v7 with: name: build-macos path: libsodium-apple/macos/lib/libsodium.dylib - uses: actions/upload-artifact@v7 with: name: build-ios path: libsodium-apple/ios/lib/libsodium.a - uses: actions/upload-artifact@v7 with: name: build-tvos path: libsodium-apple/tvos/lib/libsodium.a - uses: actions/upload-artifact@v7 with: name: build-maccatalyst path: libsodium-apple/catalyst/lib/libsodium.a pack: runs-on: ubuntu-latest needs: - build-windows-msvc - build-apple - build-others container: image: mcr.microsoft.com/dotnet/sdk:6.0 env: DOTNET_CLI_TELEMETRY_OPTOUT: 1 DOTNET_SKIP_FIRST_TIME_EXPERIENCE: 1 DOTNET_SYSTEM_GLOBALIZATION_INVARIANT: 1 steps: - uses: actions/checkout@v6 - uses: actions/download-artifact@v8 with: name: build-win-x64 path: .libsodium-pack/runtimes/win-x64/native/ - uses: actions/download-artifact@v8 with: name: build-win-x86 path: .libsodium-pack/runtimes/win-x86/native/ - uses: actions/download-artifact@v8 with: name: build-win-arm64 path: .libsodium-pack/runtimes/win-arm64/native/ - uses: actions/download-artifact@v8 with: name: build-linux-x64 path: .libsodium-pack/runtimes/linux-x64/native/ - uses: actions/download-artifact@v8 with: name: build-linux-arm64 path: .libsodium-pack/runtimes/linux-arm64/native/ - uses: actions/download-artifact@v8 with: name: build-linux-arm path: .libsodium-pack/runtimes/linux-arm/native/ - uses: actions/download-artifact@v8 with: name: build-linux-musl-x64 path: .libsodium-pack/runtimes/linux-musl-x64/native/ - uses: actions/download-artifact@v8 with: name: build-linux-musl-arm path: .libsodium-pack/runtimes/linux-musl-arm/native/ - uses: actions/download-artifact@v8 with: name: build-linux-musl-arm64 path: .libsodium-pack/runtimes/linux-musl-arm64/native/ - uses: actions/download-artifact@v8 with: name: build-macos path: .libsodium-pack/runtimes/osx-x64/native/ - uses: actions/download-artifact@v8 with: name: build-macos path: .libsodium-pack/runtimes/osx-arm64/native/ - uses: actions/download-artifact@v8 with: name: build-ios path: .libsodium-pack/runtimes/ios-arm64/native/ - uses: actions/download-artifact@v8 with: name: build-tvos path: .libsodium-pack/runtimes/tvos-arm64/native/ - uses: actions/download-artifact@v8 with: name: build-maccatalyst path: .libsodium-pack/runtimes/maccatalyst-x64/native/ - uses: actions/download-artifact@v8 with: name: build-maccatalyst path: .libsodium-pack/runtimes/maccatalyst-arm64/native/ - uses: actions/download-artifact@v8 with: name: build-android-arm64 path: .libsodium-pack/runtimes/android-arm64/native/ - uses: actions/download-artifact@v8 with: name: build-android-arm path: .libsodium-pack/runtimes/android-arm/native/ - uses: actions/download-artifact@v8 with: name: build-android-x64 path: .libsodium-pack/runtimes/android-x64/native/ - uses: actions/download-artifact@v8 with: name: build-android-x86 path: .libsodium-pack/runtimes/android-x86/native/ - name: Copy files run: cp AUTHORS ChangeLog LICENSE packaging/dotnet-core/libsodium.pkgproj .libsodium-pack/ - name: Create NuGet package run: dotnet pack -c Release .libsodium-pack/libsodium.pkgproj - uses: actions/upload-artifact@v7 with: name: nuget-package path: .libsodium-pack/bin/Release/*.nupkg - name: Attest Build Provenance uses: actions/attest-build-provenance@v4 with: subject-path: .libsodium-pack/bin/Release/*.nupkg build-test-binaries: runs-on: ubuntu-latest needs: - pack container: image: mcr.microsoft.com/dotnet/sdk:6.0 env: DOTNET_CLI_TELEMETRY_OPTOUT: 1 DOTNET_SKIP_FIRST_TIME_EXPERIENCE: 1 DOTNET_SYSTEM_GLOBALIZATION_INVARIANT: 1 steps: - uses: actions/checkout@v6 - uses: actions/download-artifact@v8 with: name: nuget-package path: .libsodium-pack/ - name: dotnet new run: dotnet new console -n Tests -o .libsodium-test/ - name: dotnet add package libsodium run: dotnet add .libsodium-test/Tests.csproj package libsodium -s $PWD/.libsodium-pack - name: Copy files run: cp -f packaging/dotnet-core/test.cs .libsodium-test/Program.cs - name: dotnet publish linux-x64 run: dotnet publish -c Release -r linux-x64 --self-contained true -p:PublishTrimmed=true working-directory: .libsodium-test/ - name: dotnet publish linux-arm run: dotnet publish -c Release -r linux-arm --self-contained true -p:PublishTrimmed=true working-directory: .libsodium-test/ - name: dotnet publish linux-arm64 run: dotnet publish -c Release -r linux-arm64 --self-contained true -p:PublishTrimmed=true working-directory: .libsodium-test/ - name: Move Build Output run: | mkdir .libsodium-builds mv .libsodium-test/bin/Release/net6.0/linux-arm/publish .libsodium-builds/linux-arm mv .libsodium-test/bin/Release/net6.0/linux-arm64/publish .libsodium-builds/linux-arm64 mv .libsodium-test/bin/Release/net6.0/linux-x64/publish .libsodium-builds/linux-x64 - uses: actions/upload-artifact@v7 with: name: test-builds path: .libsodium-builds/* include-hidden-files: true run-test-binaries-os-versions: runs-on: ubuntu-latest needs: - build-test-binaries strategy: matrix: arch: [ 'centos:8', 'debian:10' ] container: image: ${{ matrix.arch }} env: DOTNET_SYSTEM_GLOBALIZATION_INVARIANT: 1 steps: - uses: actions/download-artifact@v8 with: name: test-builds path: .libsodium-builds/ - name: Run x64 tests run: | chmod +x .libsodium-builds/linux-x64/Tests .libsodium-builds/linux-x64/Tests run-test-binaries-cross-plat: runs-on: ubuntu-22.04 needs: - build-test-binaries env: DOTNET_SYSTEM_GLOBALIZATION_INVARIANT: 1 strategy: matrix: include: - arch: x64 libs: /usr/lib - arch: arm libs: /usr/arm-linux-gnueabihf/lib - arch: arm64 libs: /usr/aarch64-linux-gnu/lib arch: [x64, arm, arm64] steps: - name: Set up build environment run: | export DEBIAN_FRONTEND=noninteractive # On virtualization systems such as the one used by WSL2, the ARM crypto extensions # don't work as expected. As a result, installing on Ubuntu fails during integrity # checks. As a workaround, the following command disables hardware acceleration for # gcrypt, which the apt-get command relies on. sudo mkdir -p /etc/gcrypt && echo all | sudo tee /etc/gcrypt/hwf.deny sudo apt-get update && sudo apt-get install -y qemu-system binfmt-support qemu-user-static qemu-system-arm gcc-arm-linux-gnueabihf gcc-aarch64-linux-gnu libc6-armhf-cross libc6-arm64-cross sudo dpkg --add-architecture armhf sudo dpkg --add-architecture arm64 sudo update-binfmts --enable qemu-aarch64 sudo update-binfmts --enable qemu-arm sudo update-binfmts --display sudo ln -s /usr/aarch64-linux-gnu/lib/ld-linux-aarch64.so.* /lib sudo ln -s /usr/arm-linux-gnueabihf/lib/ld-linux-armhf.so.* /lib - uses: actions/download-artifact@v8 with: name: test-builds path: .libsodium-builds/ - name: Run ${{ matrix.arch }} run: | chmod +x .libsodium-builds/linux-${{ matrix.arch }}/Tests env LD_LIBRARY_PATH=${{ matrix.libs }} .libsodium-builds/linux-${{ matrix.arch }}/Tests libsodium-1.0.22-RELEASE/.gitignore000066400000000000000000000067651516601152600166520ustar00rootroot00000000000000!build .deps .dirstamp .done .DS_Store .libs .swival/ .zig-cache *.bc *.done *.dSYM *.final *.gcda *.gcno *.i *.la *.lo *.log *.mem *.nexe *.o *.plist *.scan *.sdf *.status *.tar.* *.vs/ *.wasm *.wast *~ /bin/ /obj/ aclocal.m4 android-toolchain android-toolchain-* autom4te.cache build Build compile confdefs.h config.* configure configure.lineno conftest.c conftest.err coverage.info depcomp INSTALL install-sh libsodium-*.tar.bz2 libsodium-*.tar.gz libsodium-*.vcproj libsodium-*.vcproj.filters libsodium-*.vcxproj libsodium-*.vcxproj.filters libsodium-android-* libsodium-ios libsodium-js libsodium-js-* libsodium-nativeclient libsodium-nativeclient-* libsodium-osx libsodium-uninstalled.pc libsodium-wasm32-wasi libsodium-win32 libsodium-win64 libsodium.pc libtool ltmain.sh m4/argz.m4 m4/libtool.m4 m4/lt~obsolete.m4 m4/ltoptions.m4 m4/ltsugar.m4 m4/ltversion.m4 Makefile Makefile.in man/*.html man/Makefile.in missing src/libsodium/*.def src/libsodium/include/sodium/version.h stamp-* test-driver test/default/*.asm.js test/default/*.res test/default/*.trs test/default/aead_aegis128l test/default/aead_aegis256 test/default/aead_aes256gcm test/default/aead_aes256gcm2 test/default/aead_chacha20poly1305 test/default/aead_chacha20poly13052 test/default/aead_xchacha20poly1305 test/default/auth test/default/auth2 test/default/auth3 test/default/auth5 test/default/auth6 test/default/auth7 test/default/box test/default/box_easy test/default/box_easy2 test/default/box_seal test/default/box_seed test/default/box2 test/default/box7 test/default/box8 test/default/browser test/default/chacha20 test/default/codecs test/default/codecs2 test/default/codecs3 test/default/core_ed25519 test/default/core_keccak1600 test/default/core_ristretto255 test/default/core1 test/default/core2 test/default/core3 test/default/core4 test/default/core5 test/default/core6 test/default/ed25519_convert test/default/generichash test/default/generichash2 test/default/generichash3 test/default/hash test/default/hash_sha3256 test/default/hash_sha3512 test/default/hash3 test/default/ipcrypt test/default/kdf test/default/kdf_hkdf test/default/kdf_hkdf2 test/default/kdf_hkdf3 test/default/kdf_hkdf4 test/default/kem test/default/kem_mlkem768 test/default/kem_xwing test/default/keygen test/default/kx test/default/metamorphic test/default/misuse test/default/onetimeauth test/default/onetimeauth2 test/default/onetimeauth7 test/default/pwhash_argon2i test/default/pwhash_argon2id test/default/pwhash_argon2id2 test/default/pwhash_scrypt test/default/pwhash_scrypt_ll test/default/randombytes test/default/scalarmult test/default/scalarmult_ed25519 test/default/scalarmult_ristretto255 test/default/scalarmult2 test/default/scalarmult5 test/default/scalarmult6 test/default/scalarmult7 test/default/scalarmult8 test/default/secretbox test/default/secretbox_easy test/default/secretbox_easy2 test/default/secretbox2 test/default/secretbox7 test/default/secretbox8 test/default/secretstream_xchacha20poly1305 test/default/shorthash test/default/sign test/default/siphashx24 test/default/sodium_core test/default/sodium_utils test/default/sodium_utils2 test/default/sodium_utils3 test/default/sodium_utils4 test/default/sodium_version test/default/stream test/default/stream2 test/default/stream3 test/default/stream4 test/default/stream5 test/default/stream6 test/default/verify1 test/default/xchacha20 test/default/xof_shake128 test/default/xof_shake256 test/default/xof_turboshake128 test/default/xof_turboshake256 test/default/xof2 test/js.done testing tmp/ Vagrantfile zig-cache zig-out libsodium-1.0.22-RELEASE/AUTHORS000066400000000000000000000113541516601152600157200ustar00rootroot00000000000000 Designers ========= argon2 Alex Biryukov Daniel Dinu Dmitry Khovratovich blake2 Jean-Philippe Aumasson Christian Winnerlein Samuel Neves Zooko Wilcox-O'Hearn chacha20 Daniel J. Bernstein chacha20poly1305 Adam Langley Yoav Nir curve25519 Daniel J. Bernstein curve25519xsalsa20poly1305 Daniel J. Bernstein ed25519 Daniel J. Bernstein Bo-Yin Yang Niels Duif Peter Schwabe Tanja Lange poly1305 Daniel J. Bernstein ristretto Mike Hamburg Henry de Valence Jack Grigg George Tankersley Filippo Valsorda Isis Lovecruft salsa20 Daniel J. Bernstein scrypt Colin Percival siphash Jean-Philippe Aumasson Daniel J. Bernstein Implementors ============ crypto_aead/aes256gcm/aesni Frank Denis crypto_aead/chacha20poly1305 Frank Denis crypto_aead/xchacha20poly1305 Frank Denis Jason A. Donenfeld crypto_auth/hmacsha256 Colin Percival crypto_auth/hmacsha512 crypto_auth/hmacsha512256 crypto_box/curve25519xsalsa20poly1305 Daniel J. Bernstein crypto_box/curve25519xchacha20poly1305 Frank Denis crypto_core/ed25519 Daniel J. Bernstein Adam Langley Frank Denis crypto_core/hchacha20 Frank Denis crypto_core/hsalsa20 Daniel J. Bernstein crypto_core/salsa crypto_generichash/blake2b Jean-Philippe Aumasson Christian Winnerlein Samuel Neves Zooko Wilcox-O'Hearn crypto_hash/sha256 Colin Percival crypto_hash/sha512 crypto_hash/sha512256 crypto_kdf Frank Denis crypto_kx Frank Denis crypto_onetimeauth/poly1305/donna Andrew "floodyberry" Moon crypto_onetimeauth/poly1305/sse2 crypto_pwhash/argon2 Samuel Neves Dmitry Khovratovich Jean-Philippe Aumasson Daniel Dinu Thomas Pornin crypto_pwhash/scryptsalsa208sha256 Colin Percival Alexander Peslyak crypto_scalarmult/curve25519/ref10 Daniel J. Bernstein crypto_scalarmult/curve25519/sandy2x Tung Chou crypto_scalarmult/ed25519 Frank Denis crypto_scalarmult/ristretto255 Frank Denis crypto_secretbox/xsalsa20poly1305 Daniel J. Bernstein crypto_secretbox/xchacha20poly1305 Frank Denis crypto_secretstream/xchacha20poly1305 Frank Denis crypto_shorthash/siphash24 Jean-Philippe Aumasson Daniel J. Bernstein crypto_sign/ed25519 Peter Schwabe Daniel J. Bernstein Niels Duif Tanja Lange Bo-Yin Yang crypto_stream/chacha20/ref Daniel J. Bernstein crypto_stream/chacha20/dolbeau Romain Dolbeau Daniel J. Bernstein crypto_stream/salsa20/ref Daniel J. Bernstein crypto_stream/salsa20/xmm6 crypto_stream/salsa20/xmm6int Romain Dolbeau Daniel J. Bernstein crypto_stream/salsa2012/ref Daniel J. Bernstein crypto_stream/salsa2008/ref crypto_stream/xchacha20 Frank Denis crypto_verify Frank Denis sodium/codecs.c Frank Denis Thomas Pornin Christian Winnerlein sodium/core.c Frank Denis sodium/runtime.h sodium/utils.c libsodium-1.0.22-RELEASE/CITATION.cff000066400000000000000000000007201516601152600165350ustar00rootroot00000000000000cff-version: 1.2.0 title: libsodium message: >- If you use this software, please cite it using the metadata from this file. type: software authors: - given-names: Frank family-names: Denis orcid: 'https://orcid.org/0009-0008-4417-1713' repository-code: 'https://github.com/jedisct1/libsodium' url: 'https://libsodium.org' abstract: 'A modern, portable, easy-to-use cryptographic library.' keywords: - cryptography - library - nacl license: ISC libsodium-1.0.22-RELEASE/ChangeLog000066400000000000000000001130621516601152600164210ustar00rootroot00000000000000* Version 1.0.22 This point release includes all the changes from 1.0.21-stable, plus: - Post-quantum key encapsulation is now available. ML-KEM768, the NIST-standardized lattice-based KEM, is accessible through the `crypto_kem_mlkem768_*()` functions. - X-Wing, a hybrid KEM combining ML-KEM768 with X25519 for protection against both classical and quantum adversaries, is available through the `crypto_kem_*()` functions. X-Wing is the recommended KEM for most applications. - SHA-3 hash functions are now available as `crypto_hash_sha3256_*()` and `crypto_hash_sha3512_*()`, with both one-shot and streaming APIs. * Version 1.0.21-stable - Performance: NEON optimizations for Argon2 on ARM platforms. - Performance: SHA3 (Keccak1600) now leverages ARM SHA3 instructions when available on ARM platforms. - Performance: WebAssembly SIMD implementations of Argon2 have been added. - Emscripten: LTO is now disabled. With Emscripten 4, LTO produced WebAssembly modules with functions that ran significantly slower than without it. - Emscripten: a new option allows compilation with SIMD support. - Emscripten: native ESM module generation is now supported. - JavaScript sumo builds now allow up to 80 MiB memory usage, so that `crypto_pwhash` with the interactive settings can be used in pure JavaScript, not just WebAssembly. - XOF state alignment has been relaxed. - `crypto_core_keccak1600_state` has been added. - Export missing `crypto_ipcrypt_nd_keygen()` helper function. - `crypto_auth_hmacsha256_init` and `crypto_auth_hmacsha512_init` now accept NULL key pointers (with a zero key length), for consistency with other `_init` functions. - apple-xcframework: headers are now in a Clibsodium subdirectory to prevent module.modulemap collisions with other xcframeworks. - Fixed compilation with GCC on aarch64 and gcc 4.x. - On aarch64, aes256-gcm is now enabled even when not using clang, including MSVC. - Added compatibility with Visual Studio 2026 when toolsets do not define PlatformToolsetVersion. - Libsodium can be directly used as a dependency in a Zig project. - Performance of MSVC builds has been improved. * Version 1.0.21 This point release includes all the changes from 1.0.20-stable, which include a security fix for the `crypto_core_ed25519_is_valid_point()` function, as well as two new sets of functions: - The new `crypto_ipcrypt_*` functions implement mechanisms for securely encrypting and anonymizing IP addresses as specified in https://ipcrypt-std.github.io - The `sodium_bin2ip` and `sodium_ip2bin` helper functions have been added to complement the `crypto_ipcrypt_*` functions and easily convert addresses between bytes and strings. - XOF: the `crypto_xof_shake*` and `crypto_xof_turboshake*` functions are standard extendable output functions. From input of any length, they can derive output of any length with the same properties as hash functions. These primitives are required by many post-quantum mechanisms, but can also be used for a wide range of applications, including key derivation, session encryption and more. * Version 1.0.20-stable - XCFramework: cross-compilation is now forced on Apple Silicon to avoid Rosetta-related build issues - The Fil-C compiler is supported out of the box - The CompCert compiler is supported out of the box - MSVC 2026 (Visual Studio 2026) is now supported - Zig builds now support FreeBSD targets - Performance of AES256-GCM and AEGIS on ARM has been improved with some compilers - Android binaries have been added to the NuGet package - Windows ARM binaries have been added to the NuGet package - The Android build script has been improved. The base SDK is now 27c, and the default platform is 21, supporting 16 KB page sizes. - The library can now be compiled with Zig 0.15 and Zig 0.16 - Zig builds now generate position-independent static libraries by default on targets that support PIC - arm64e builds have been added to the XCFramework packages - XCFramework packages are now full builds instead of minimal builds - MSVC builds have been enabled for ARM64 - iOS 32-bit (armv7/armv7s) support has been removed from the XCFramework build script - Security: optblockers have been introduced in critical code paths to prevent compilers from introducing unwanted side channels via conditional jumps. This was observed on RISC-V targets with specific compilers and options. - Security: `crypto_core_ed25519_is_valid_point()` now properly rejects small-order points that are not in the main subgroup - `((nonnull))` attributes have been relaxed on some `crypto_stream*` functions to allow NULL output buffers when the output length is zero - A cross-compilation issue with old clang versions has been fixed - JavaScript: support for Cloudflare Workers has been added - JavaScript: WASM_BIGINT is forcibly disabled to retain compatibility with older runtimes - A compilation issue with old toolchains on Solaris has been fixed - `crypto_aead_aes256gcm_is_available` is exported to JavaScript - libsodium is now compatible with Emscripten 4.x - Security: memory fences have been added after MAC verification in AEAD to prevent speculative access to plaintext before authentication is complete - Assembly files now include .gnu.property notes for proper IBT and Shadow Stack support when building with CET instrumentation * Version 1.0.20 This point release includes all the changes from 1.0.19-stable, mainly addressing compilation issues and improvements to the .NET packages. * Version 1.0.19-stable - Building with `zig build` now requires Zig 0.12. - When using the traditional build system, -O3 is used instead of -Ofast. - Improved detection of the compiler flags required on aarch64. - Improved compatibility with custom build systems on aarch64. - apple-xcframework: VisionOS packages are not built if Xcode doesn't include that SDK. - `crypto_kdf_hkdf_sha512_statebytes()` was added. - When using Visual Studio, runtime CPU feature detection is now enabled on Windows/aarch64. - There were issues with C++ guards affecting usage of libsodium using Swift on Windows. This has been fixed. - Emscripten: `crypto_aead_aegis*()` functions are now exported in JavaScript builds - Emscripten: unsupported `--memory-init-file` option has been removed. - apple-xcframework: the minimal deployment target can be set to iOS 11+. - .NET packages now include precompiled libraries for Windows/arm64, iOS, TvOS and Catalyst. - .NET precompiled libraries now work on any CPUs, using only runtime feature detection. - SYSV assembly should not be used when targeting Windows (reported by @meiyese, thanks!) - Compatibility issues with LLVM 18 and AVX512 have been addressed. - GitHub attestation build provenance is now added to NuGet packages. - JavaScript tests can now use Bun as an alternative to Node. * Version 1.0.19 This release includes all the changes from 1.0.18-stable, as well as two additions: - New AEADs: AEGIS-128L and AEGIS-256 are now available in the `crypto_aead_aegis128l_*()` and `crypto_aead_aegis256_*()` namespaces. AEGIS is a family of authenticated ciphers for high-performance applications, leveraging hardware AES acceleration on `x86_64` and `aarch64`. In addition to performance, AEGIS ciphers have unique properties making them easier and safer to use than AES-GCM. They can also be used as high-performance MACs. - The HKDF key derivation mechanism, required by many standard protocols, is now available in the `crypto_kdf_hkdf_*()` namespace. It is implemented for the SHA-256 and SHA-512 hash functions. - The `osx.sh` build script was renamed to `macos.sh`. - Support for android-mips was removed. * Version 1.0.18-stable - Visual Studio: support for Windows/ARM64 builds has been added. - Visual Studio: AVX512 implementations are enabled on supported CPUs. - Visual Studio: an MSVC 2022 solution was added. - Apple XCFramework: support for VisionOS was added. - Apple XCFramework: support for Catalyst was added. - Apple XCFramework: building the simulators is now optional. - iOS: bitcode is not generated any more, as it was deprecated by Apple. - watchOS: support for arm64 was added. - The Zig toolchain can now be used as a modern build system to replace autoconf/automake/libtool/make/ccache and the compiler. This enables faster compilation times, easier cross compilation, and static libraries optimized for any CPU. - The Zig toolchain is now the recommended way to compile `libsodium` to WebAssembly/WASI(X). - libsodium can now be added as a dependency to Zig projects. - Memory fences were added to remove some gadgets that could be used alongside speculative loads. - The AES-GCM implementation was completely rewritten. It is now faster, and also available on aarch64, including Windows/ARM64. - Compatibility with CET instrumentation / IBT / Shadow Stack was added. - Emscripten: the `crypto_pwhash_*()` functions have been removed from Sumo builds, as they reserve a substantial amount of JavaScript memory, even when not used. - Benchmarks now use `CLOCK_MONOTONIC` if possible. - WebAssembly: tests can now run using Bun, WasmEdge, Wazero, wasm3 and wasmer-js. Support for WAVM and Lucet have been removed, as these projects have reached EOL. - .NET: the minimum supported macOS version is now 10.15; this matches Microsoft guidelines. - .NET: all the packages are now built using Zig, on all platforms. This allows us to easily match Microsoft's requirements, including supported glibc versions. However, on x86_64, targets are expected to support at least the AVX instruction set. - .NET: packages for ARM64 are now available. - C23 `memset_explicit()` is now used, when available. - Compilation now uses `-Ofast` or `-O3` instead of `-O2` by default. - Portability improvements to help compile libsodium to modern game consoles. - JavaScript: a default `unhandledRejection` handler is not set any more. - Slightly faster 25519 operations. - OpenBSD: leverage `MAP_CONCEAL`. * Version 1.0.18 - Enterprise versions of Visual Studio are now supported. - Visual Studio 2019 is now supported. - 32-bit binaries for Visual Studio 2010 are now provided. - A test designed to trigger an OOM condition didn't work on Linux systems with memory overcommit turned on. It has been removed in order to fix Ansible builds. - Emscripten: `print` and `printErr` functions are overridden to send errors to the console, if there is one. - Emscripten: `UTF8ToString()` is now exported since `Pointer_stringify()` has been deprecated. - Libsodium version detection has been fixed in the CMake recipe. - Generic hashing got a 10% speedup on AVX2. - New target: WebAssembly/WASI (compile with `dist-builds/wasm32-wasi.sh`). - New functions to map a hash to an edwards25519 point or get a random point: `core_ed25519_from_hash()` and `core_ed25519_random()`. - `crypto_core_ed25519_scalar_mul()` has been implemented for `scalar*scalar (mod L)` multiplication. - Support for the Ristretto group has been implemented for interoperability with wasm-crypto. - Improvements have been made to the test suite. - Portability improvements have been made. - `getentropy()` is now used on systems providing this system call. - `randombytes_salsa20` has been renamed to `randombytes_internal`. - Support for NativeClient has been removed. - Most `((nonnull))` attributes have been relaxed to allow 0-length inputs to be `NULL`. - The `-ftree-vectorize` and `-ftree-slp-vectorize` compiler switches are now used, if available, for optimized builds. * Version 1.0.17-stable - AVX512 detection has been improved. - A compilation option was added to enable retpoline support. - `-ftls-model=global-dynamic` is now set, if available. - Portability and documentation improvements. * Version 1.0.17 - Bug fix: `sodium_pad()` didn't properly support block sizes >= 256 bytes. - JS/WebAssembly: some old iOS versions can't instantiate the WebAssembly module; fall back to JavaScript on these. - JS/WebAssembly: compatibility with newer Emscripten versions. - Bug fix: `crypto_pwhash_scryptsalsa208sha256_str_verify()` and `crypto_pwhash_scryptsalsa208sha256_str_needs_rehash()` didn't return `EINVAL` on input strings with a short length, unlike their high-level counterpart. - Added a workaround for Visual Studio 2010 bug causing CPU features not to be detected. - Portability improvements. - Test vectors from Project Wycheproof have been added. - New low-level APIs for arithmetic mod the order of the prime order group: `crypto_core_ed25519_scalar_random()`, `crypto_core_ed25519_scalar_reduce()`, `crypto_core_ed25519_scalar_invert()`, `crypto_core_ed25519_scalar_negate()`, `crypto_core_ed25519_scalar_complement()`, `crypto_core_ed25519_scalar_add()` and `crypto_core_ed25519_scalar_sub()`. - New low-level APIs for scalar multiplication without clamping: `crypto_scalarmult_ed25519_base_noclamp()` and `crypto_scalarmult_ed25519_noclamp()`. These new APIs are especially useful for blinding. - `sodium_sub()` has been implemented. - Support for WatchOS has been added. - getrandom(2) is now used on FreeBSD 12+. - The `nonnull` attribute has been added to all relevant prototypes. - More reliable AVX512 detection. - JavaScript/WebAssembly builds now use dynamic memory growth. * Version 1.0.16 - Signatures computations and verifications are now way faster on 64-bit platforms with compilers supporting 128-bit arithmetic (gcc, clang, icc). This includes the WebAssembly target. - New low-level APIs for computations over edwards25519: `crypto_scalarmult_ed25519()`, `crypto_scalarmult_ed25519_base()`, `crypto_core_ed25519_is_valid_point()`, `crypto_core_ed25519_add()`, `crypto_core_ed25519_sub()` and `crypto_core_ed25519_from_uniform()` (elligator representative to point). - `crypto_sign_open()`, `crypto_sign_verify_detached()` and `crypto_sign_edwards25519sha512batch_open()` now reject public keys in non-canonical form in addition to low-order points. - The library can be built with `ED25519_NONDETERMINISTIC` defined in order to use synthetic nonces for EdDSA. This is disabled by default. - WebAssembly: `crypto_pwhash_*()` functions are now included in non-sumo builds. - `sodium_stackzero()` was added to wipe content off the stack. - Android: support new SDKs where unified headers have become the default. - The Salsa20-based PRNG example is now thread-safe on platforms with support for thread-local storage, optionally mixes bits from RDRAND. - CMAKE: static library detection on Unix systems has been improved (thanks to @BurningEnlightenment, @nibua-r, @mellery451) - Argon2 and scrypt are slightly faster on Linux. * Version 1.0.15 - The default password hashing algorithm is now Argon2id. The `pwhash_str_verify()` function can still verify Argon2i hashes without any changes, and `pwhash()` can still compute Argon2i hashes as well. - The aes128ctr primitive was removed. It was slow, non-standard, not authenticated, and didn't seem to be used by any opensource project. - Argon2id required at least 3 passes like Argon2i, despite a minimum of `1` as defined by the `OPSLIMIT_MIN` constant. This has been fixed. - The secretstream construction was slightly changed to be consistent with forthcoming variants. - The JavaScript and WebAssembly versions have been merged, and the module now returns a `.ready` promise that will resolve after the WebAssembly code is loaded and compiled. - Note that due to these incompatible changes, the library version major was bumped up. * Version 1.0.14 - iOS binaries should now be compatible with WatchOS and TVOS. - WebAssembly is now officially supported. Special thanks to @facekapow and @pepyakin who helped to make it happen. - Internal consistency checks failing and primitives used with dangerous/out-of-bounds/invalid parameters used to call abort(3). Now, a custom handler *that doesn't return* can be set with the `set_sodium_misuse()` function. It still aborts by default or if the handler ever returns. This is not a replacement for non-fatal, expected runtime errors. This handler will be only called in unexpected situations due to potential bugs in the library or in language bindings. - `*_MESSAGEBYTES_MAX` macros (and the corresponding `_messagebytes_max()` symbols) have been added to represent the maximum message size that can be safely handled by a primitive. Language bindings are encouraged to check user inputs against these maximum lengths. - The test suite has been extended to cover more edge cases. - crypto_sign_ed25519_pk_to_curve25519() now rejects points that are not on the curve, or not in the main subgroup. - Further changes have been made to ensure that smart compilers will not optimize out code that we don't want to be optimized. - Visual Studio solutions are now included in distribution tarballs. - The `sodium_runtime_has_*` symbols for CPU features detection are now defined as weak symbols, i.e. they can be replaced with an application-defined implementation. This can be useful to disable AVX* when temperature/power consumption is a concern. - `crypto_kx_*()` now aborts if called with no non-NULL pointers to store keys to. - SSE2 implementations of `crypto_verify_*()` have been added. - Passwords can be hashed using a specific algorithm with the new `crypto_pwhash_str_alg()` function. - Due to popular demand, base64 encoding (`sodium_bin2base64()`) and decoding (`sodium_base642bin()`) have been implemented. - A new `crypto_secretstream_*()` API was added to safely encrypt files and multi-part messages. - The `sodium_pad()` and `sodium_unpad()` helper functions have been added in order to add & remove padding. - An AVX512 optimized implementation of Argon2 has been added (written by Ondrej Mosnáček, thanks!) - The `crypto_pwhash_str_needs_rehash()` function was added to check if a password hash string matches the given parameters, or if it needs an update. - The library can now be compiled with recent versions of emscripten/binaryen that don't allow multiple variables declarations using a single `var` statement. * Version 1.0.13 - JavaScript: the sumo builds now include all symbols. They were previously limited to symbols defined in minimal builds. - The public `crypto_pwhash_argon2i_MEMLIMIT_MAX` constant was incorrectly defined on 32-bit platforms. This has been fixed. - Version 1.0.12 didn't compile on OpenBSD/i386 using the base gcc compiler. This has been fixed. - The Android compilation scripts have been updated for NDK r14b. - armv7s-optimized code was re-added to iOS builds. - An AVX2 optimized implementation of the Argon2 round function was added. - The Argon2id variant of Argon2 has been implemented. The high-level `crypto_pwhash_str_verify()` function automatically detects the algorithm and can verify both Argon2i and Argon2id hashed passwords. The default algorithm for newly hashed passwords remains Argon2i in this version to avoid breaking compatibility with verifiers running libsodium <= 1.0.12. - A `crypto_box_curve25519xchacha20poly1305_seal*()` function set was implemented. - scrypt was removed from minimal builds. - libsodium is now available on NuGet. * Version 1.0.12 - Ed25519ph was implemented, adding a multi-part signature API (`crypto_sign_init()`, `crypto_sign_update()`, `crypto_sign_final_*()`). - New constants and related accessors have been added for Scrypt and Argon2. - XChaCha20 has been implemented. Like XSalsa20, this construction extends the ChaCha20 cipher to accept a 192-bit nonce. This makes it safe to use ChaCha20 with random nonces. - `crypto_secretbox`, `crypto_box` and `crypto_aead` now offer variants leveraging XChaCha20. - SHA-2 is about 20% faster, which also gives a speed boost to signature and signature verification. - AVX2 implementations of Salsa20 and ChaCha20 have been added. They are twice as fast as the SSE2 implementations. The speed gain is even more significant on Windows, that previously didn't use vectorized implementations. - New high-level API: `crypto_kdf`, to easily derive one or more subkeys from a master key. - Siphash with a 128-bit output has been implemented, and is available as `crypto_shorthash_siphashx_*`. - New `*_keygen()` helpers functions have been added to create secret keys for all constructions. This improves code clarity and can prevent keys from being partially initialized. - A new `randombytes_buf_deterministic()` function was added to deterministically fill a memory region with pseudorandom data. This function can especially be useful to write reproducible tests. - A preliminary `crypto_kx_*()` API was added to compute shared session keys. - AVX2 detection is more reliable. - The pthreads library is not required any more when using MingW. - `contrib/Findsodium.cmake` was added as an example to include libsodium in a project using cmake. - Compatibility with gcc 2.x has been restored. - Minimal builds can be checked using `sodium_library_minimal()`. - The `--enable-opt` compilation switch has become compatible with more platforms. - Android builds are now using clang on platforms where it is available. * Version 1.0.11 - `sodium_init()` is now thread-safe, and can be safely called multiple times. - Android binaries now properly support 64-bit Android, targeting platform 24, but without breaking compatibility with platforms 16 and 21. - Better support for old gcc versions. - On FreeBSD, core dumps are disabled on regions allocated with sodium allocation functions. - AVX2 detection was fixed, resulting in faster Blake2b hashing on platforms where it was not properly detected. - The Sandy2x Curve25519 implementation was not as fast as expected on some platforms. This has been fixed. - The NativeClient target was improved. Most notably, it now supports optimized implementations, and uses pepper_49 by default. - The library can be compiled with recent Emscripten versions. Changes have been made to produce smaller code, and the default heap size was reduced in the standard version. - The code can now be compiled on SLES11 service pack 4. - Decryption functions can now accept a NULL pointer for the output. This checks the MAC without writing the decrypted message. - crypto_generichash_final() now returns -1 if called twice. - Support for Visual Studio 2008 was improved. * Version 1.0.10 - This release only fixes a compilation issue reported with some older gcc versions. There are no functional changes over the previous release. * Version 1.0.9 - The JavaScript target now includes a `--sumo` option to include all the symbols of the original C library. - A detached API was added to the ChaCha20-Poly1305 and AES256-GCM implementations. - The Argon2i password hashing function was added, and is accessible directly and through a new, high-level `crypto_pwhash` API. The scrypt function remains available as well. - A speed-record AVX2 implementation of BLAKE2b was added (thanks to Samuel Neves). - The library can now be compiled using C++Builder (thanks to @jcolli44) - Countermeasures for Ed25519 signatures malleability have been added to match the irtf-cfrg-eddsa draft (note that malleability is irrelevant to the standard definition of signature security). Signatures with a small-order `R` point are now also rejected. - Some implementations are now slightly faster when using the Clang compiler. - The HChaCha20 core function was implemented (`crypto_core_hchacha20()`). - No-op stubs were added for all AES256-GCM public functions even when compiled on non-Intel platforms. - `crypt_generichash_blake2b_statebytes()` was added. - New macros were added for the IETF variant of the ChaCha20-Poly1305 construction. - The library can now be compiled on Minix. - HEASLR is now enabled on MinGW builds. * Version 1.0.8 - Handle the case where the CPU supports AVX, but we are running on an hypervisor with AVX disabled/not supported. - Faster (2x) scalarmult_base() when using the ref10 implementation. * Version 1.0.7 - More functions whose return value should be checked have been tagged with `__attribute__ ((warn_unused_result))`: `crypto_box_easy()`, `crypto_box_detached()`, `crypto_box_beforenm()`, `crypto_box()`, and `crypto_scalarmult()`. - Sandy2x, the fastest Curve25519 implementation ever, has been merged in, and is automatically used on CPUs supporting the AVX instructions set. - An SSE2 optimized implementation of Poly1305 was added, and is twice as fast as the portable one. - An SSSE3 optimized implementation of ChaCha20 was added, and is twice as fast as the portable one. - Faster `sodium_increment()` for common nonce sizes. - New helper functions have been added: `sodium_is_zero()` and `sodium_add()`. - `sodium_runtime_has_aesni()` now properly detects the CPU flag when compiled using Visual Studio. * Version 1.0.6 - Optimized implementations of Blake2 have been added for modern Intel platforms. `crypto_generichash()` is now faster than MD5 and SHA1 implementations while being far more secure. - Functions for which the return value should be checked have been tagged with `__attribute__ ((warn_unused_result))`. This will intentionally break code compiled with `-Werror` that didn't bother checking critical return values. - The `crypto_sign_edwards25519sha512batch_*()` functions have been tagged as deprecated. - Undocumented symbols that were exported, but were only useful for internal purposes have been removed or made private: `sodium_runtime_get_cpu_features()`, the implementation-specific `crypto_onetimeauth_poly1305_donna()` symbols, `crypto_onetimeauth_poly1305_set_implementation()`, `crypto_onetimeauth_poly1305_implementation_name()` and `crypto_onetimeauth_pick_best_implementation()`. - `sodium_compare()` now works as documented, and compares numbers in little-endian format instead of behaving like `memcmp()`. - The previous changes should not break actual applications, but to be safe, the library version major was incremented. - `sodium_runtime_has_ssse3()` and `sodium_runtime_has_sse41()` have been added. - The library can now be compiled with the CompCert compiler. * Version 1.0.5 - Compilation issues on some platforms were fixed: missing alignment directives were added (required at least on RHEL-6/i386), a workaround for a VRP bug on gcc/armv7 was added, and the library can now be compiled with the SunPro compiler. - JavaScript target: io.js is not supported any more. Use Node.js. * Version 1.0.4 - Support for AES256-GCM has been added. This requires a CPU with the aesni and pclmul extensions, and is accessible via the crypto_aead_aes256gcm_*() functions. - The JavaScript target doesn't use eval() any more, so that the library can be used in Chrome packaged applications. - QNX and CloudABI are now supported. - Support for NaCl has finally been added. - ChaCha20 with an extended (96 bit) nonce and a 32-bit counter has been implemented as crypto_stream_chacha20_ietf(), crypto_stream_chacha20_ietf_xor() and crypto_stream_chacha20_ietf_xor_ic(). An IETF-compatible version of ChaCha20Poly1305 is available as crypto_aead_chacha20poly1305_ietf_npubbytes(), crypto_aead_chacha20poly1305_ietf_encrypt() and crypto_aead_chacha20poly1305_ietf_decrypt(). - The sodium_increment() helper function has been added, to increment an arbitrary large number (such as a nonce). - The sodium_compare() helper function has been added, to compare arbitrary large numbers (such as nonces, in order to prevent replay attacks). * Version 1.0.3 - In addition to sodium_bin2hex(), sodium_hex2bin() is now a constant-time function. - crypto_stream_xsalsa20_ic() has been added. - crypto_generichash_statebytes(), crypto_auth_*_statebytes() and crypto_hash_*_statebytes() have been added in order to retrieve the size of structures keeping states from foreign languages. - The JavaScript target doesn't require /dev/urandom or an external randombytes() implementation any more. Other minor Emscripten-related improvements have been made in order to support libsodium.js. - Custom randombytes implementations do not need to provide their own implementation of randombytes_uniform() any more. randombytes_stir() and randombytes_close() can also be NULL pointers if they are not required. - On Linux, getrandom(2) is being used instead of directly accessing /dev/urandom, if the kernel supports this system call. - crypto_box_seal() and crypto_box_seal_open() have been added. - Visual Studio 2015 is now supported. * Version 1.0.2 - The _easy and _detached APIs now support precalculated keys; crypto_box_easy_afternm(), crypto_box_open_easy_afternm(), crypto_box_detached_afternm() and crypto_box_open_detached_afternm() have been added as an alternative to the NaCl interface. - Memory allocation functions can now be used on operating systems with no memory protection. - crypto_sign_open() and crypto_sign_edwards25519sha512batch_open() now accept a NULL pointer instead of a pointer to the message size, if storing this information is not required. - The close-on-exec flag is now set on the descriptor returned when opening /dev/urandom. - A libsodium-uninstalled.pc file to use pkg-config even when libsodium is not installed, has been added. - The iOS target now includes armv7s and arm64 optimized code, as well as i386 and x86_64 code for the iOS simulator. - sodium_free() can now be called on regions with PROT_NONE protection. - The JavaScript tests can run on Ubuntu, where the node binary was renamed nodejs. io.js can also be used instead of Node. * Version 1.0.1 - DLL_EXPORT was renamed SODIUM_DLL_EXPORT in order to avoid collisions with similar macros defined by other libraries. - sodium_bin2hex() is now constant-time. - crypto_secretbox_detached() now supports overlapping input and output regions. - NaCl's donna_c64 implementation of curve25519 was reading an extra byte past the end of the buffer containing the base point. This has been fixed. * Version 1.0.0 - The API and ABI are now stable. New features will be added, but backward-compatibility is guaranteed through all the 1.x.y releases. - crypto_sign() properly works with overlapping regions again. Thanks to @pysiak for reporting this regression introduced in version 0.6.1. - The test suite has been extended. * Version 0.7.1 (1.0 RC2) - This is the second release candidate of Sodium 1.0. Minor compilation, readability and portability changes have been made and the test suite was improved, but the API is the same as the previous release candidate. * Version 0.7.0 (1.0 RC1) - Allocating memory to store sensitive data can now be done using sodium_malloc() and sodium_allocarray(). These functions add guard pages around the protected data to make it less likely to be accessible in a heartbleed-like scenario. In addition, the protection for memory regions allocated that way can be changed using sodium_mprotect_noaccess(), sodium_mprotect_readonly() and sodium_mprotect_readwrite(). - ed25519 keys can be converted to curve25519 keys with crypto_sign_ed25519_pk_to_curve25519() and crypto_sign_ed25519_sk_to_curve25519(). This allows using the same keys for signature and encryption. - The seed and the public key can be extracted from an ed25519 key using crypto_sign_ed25519_sk_to_seed() and crypto_sign_ed25519_sk_to_pk(). - aes256 was removed. A timing-attack resistant implementation might be added later, but not before version 1.0 is tagged. - The crypto_pwhash_scryptxsalsa208sha256_* compatibility layer was removed. Use crypto_pwhash_scryptsalsa208sha256_*. - The compatibility layer for implementation-specific functions was removed. - Compilation issues with Mingw64 on MSYS (not MSYS2) were fixed. - crypto_pwhash_scryptsalsa208sha256_STRPREFIX was added: it contains the prefix produced by crypto_pwhash_scryptsalsa208sha256_str() * Version 0.6.1 - Important bug fix: when crypto_sign_open() was given a signed message too short to even contain a signature, it was putting an unlimited amount of zeros into the target buffer instead of immediately returning -1. The bug was introduced in version 0.5.0. - New API: crypto_sign_detached() and crypto_sign_verify_detached() to produce and verify ed25519 signatures without having to duplicate the message. - New ./configure switch: --enable-minimal, to create a smaller library, with only the functions required for the high-level API. Mainly useful for the JavaScript target and embedded systems. - All the symbols are now exported by the Emscripten build script. - The pkg-config .pc file is now always installed even if the pkg-config tool is not available during the installation. * Version 0.6.0 - The ChaCha20 stream cipher has been added, as crypto_stream_chacha20_* - The ChaCha20Poly1305 AEAD construction has been implemented, as crypto_aead_chacha20poly1305_* - The _easy API does not require any heap allocations any more and does not have any overhead over the NaCl API. With the password hashing function being an obvious exception, the library doesn't allocate and will not allocate heap memory ever. - crypto_box and crypto_secretbox have a new _detached API to store the authentication tag and the encrypted message separately. - crypto_pwhash_scryptxsalsa208sha256*() functions have been renamed crypto_pwhash_scryptsalsa208sha256*(). - The low-level crypto_pwhash_scryptsalsa208sha256_ll() function allows setting individual parameters of the scrypt function. - New macros and functions for recommended crypto_pwhash_* parameters have been added. - Similarly to crypto_sign_seed_keypair(), crypto_box_seed_keypair() has been introduced to deterministically generate a key pair from a seed. - crypto_onetimeauth() now provides a streaming interface. - crypto_stream_chacha20_xor_ic() and crypto_stream_salsa20_xor_ic() have been added to use a non-zero initial block counter. - On Windows, CryptGenRandom() was replaced by RtlGenRandom(), which doesn't require the Crypt API. - The high bit in curve25519 is masked instead of processing the key as a 256-bit value. - The curve25519 ref implementation was replaced by the latest ref10 implementation from Supercop. - sodium_mlock() now prevents memory from being included in coredumps on Linux 3.4+ * Version 0.5.0 - sodium_mlock()/sodium_munlock() have been introduced to lock pages in memory before storing sensitive data, and to zero them before unlocking them. - High-level wrappers for crypto_box and crypto_secretbox (crypto_box_easy and crypto_secretbox_easy) can be used to avoid dealing with the specific memory layout regular functions depend on. - crypto_pwhash_scryptsalsa208sha256* functions have been added to derive a key from a password, and for password storage. - Salsa20 and ed25519 implementations now support overlapping inputs/keys/outputs (changes imported from supercop-20140505). - New build scripts for Visual Studio, Emscripten, different Android architectures and msys2 are available. - The poly1305-53 implementation has been replaced with Floodyberry's poly1305-donna32 and poly1305-donna64 implementations. - sodium_hex2bin() has been added to complement sodium_bin2hex(). - On OpenBSD and Bitrig, arc4random() is used instead of reading /dev/urandom. - crypto_auth_hmac_sha512() has been implemented. - sha256 and sha512 now have a streaming interface. - hmacsha256, hmacsha512 and hmacsha512256 now support keys of arbitrary length, and have a streaming interface. - crypto_verify_64() has been implemented. - first-class Visual Studio build system, thanks to @evoskuil - CPU features are now detected at runtime. * Version 0.4.5 - Restore compatibility with OSX <= 10.6 * Version 0.4.4 - Visual Studio is officially supported (VC 2010 & VC 2013) - mingw64 is now supported - big-endian architectures are now supported as well - The donna_c64 implementation of curve25519_donna_c64 now handles non-canonical points like the ref implementation - Missing scalarmult_curve25519 and stream_salsa20 constants are now exported - A crypto_onetimeauth_poly1305_ref() wrapper has been added * Version 0.4.3 - crypto_sign_seedbytes() and crypto_sign_SEEDBYTES were added. - crypto_onetimeauth_poly1305_implementation_name() was added. - poly1305-ref has been replaced by a faster implementation, Floodyberry's poly1305-donna-unrolled. - Stackmarkings have been added to assembly code, for Hardened Gentoo. - pkg-config can now be used in order to retrieve compilations flags for using libsodium. - crypto_stream_aes256estream_*() can now deal with unaligned input on platforms that require word alignment. - portability improvements. * Version 0.4.2 - All NaCl constants are now also exposed as functions. - The Android and iOS cross-compilation script have been improved. - libsodium can now be cross-compiled to Windows from Linux. - libsodium can now be compiled with emscripten. - New convenience function (prototyped in utils.h): sodium_bin2hex(). * Version 0.4.1 - sodium_version_*() functions were not exported in version 0.4. They are now visible as intended. - sodium_init() now calls randombytes_stir(). - optimized assembly version of salsa20 is now used on amd64. - further cleanups and enhanced compatibility with non-C99 compilers. * Version 0.4 - Most constants and operations are now available as actual functions instead of macros, making it easier to use from other languages. - New operation: crypto_generichash, featuring a variable key size, a variable output size, and a streaming API. Currently implemented using Blake2b. - The package can be compiled in a separate directory. - aes128ctr functions are exported. - Optimized versions of curve25519 (curve25519_donna_c64), poly1305 (poly1305_53) and ed25519 (ed25519_ref10) are available. Optionally calling sodium_init() once before using the library makes it pick the fastest implementation. - New convenience function: sodium_memzero() in order to securely wipe a memory area. - A whole bunch of cleanups and portability enhancements. - On Windows, a .REF file is generated along with the shared library, for use with Visual Studio. The installation path for these has become $prefix/bin as expected by MingW. * Version 0.3 - The crypto_shorthash operation has been added, implemented using SipHash-2-4. * Version 0.2 - crypto_sign_seed_keypair() has been added * Version 0.1 - Initial release. libsodium-1.0.22-RELEASE/LICENSE000066400000000000000000000014671516601152600156610ustar00rootroot00000000000000/* * ISC License * * Copyright (c) 2013-2026 * Frank Denis * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ libsodium-1.0.22-RELEASE/Makefile.am000066400000000000000000000004571516601152600167060ustar00rootroot00000000000000ACLOCAL_AMFLAGS = -I m4 EXTRA_DIST = \ autogen.sh \ build.zig \ ChangeLog \ CITATION.cff \ LICENSE \ README.markdown \ THANKS SUBDIRS = \ builds \ contrib \ dist-build \ src \ test pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = @PACKAGE_NAME@.pc DISTCLEANFILES = $(pkgconfig_DATA) libsodium-1.0.22-RELEASE/Makefile.in000066400000000000000000000752071516601152600167240ustar00rootroot00000000000000# Makefile.in generated by automake 1.18.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2025 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) am__rm_f = rm -f $(am__rm_f_notfound) am__rm_rf = rm -rf $(am__rm_f_notfound) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_add_fortify_source.m4 \ $(top_srcdir)/m4/ax_check_catchable_abrt.m4 \ $(top_srcdir)/m4/ax_check_catchable_segv.m4 \ $(top_srcdir)/m4/ax_check_compile_flag.m4 \ $(top_srcdir)/m4/ax_check_define.m4 \ $(top_srcdir)/m4/ax_check_link_flag.m4 \ $(top_srcdir)/m4/ax_pthread.m4 $(top_srcdir)/m4/ax_tls.m4 \ $(top_srcdir)/m4/ax_valgrind_check.m4 \ $(top_srcdir)/m4/ld-output-def.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ $(am__configure_deps) $(am__DIST_COMMON) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = libsodium.pc libsodium-uninstalled.pc \ src/libsodium/include/sodium/version.h CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \ } am__installdirs = "$(DESTDIR)$(pkgconfigdir)" DATA = $(pkgconfig_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ cscope distdir distdir-am dist dist-all distcheck am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` DIST_SUBDIRS = $(SUBDIRS) am__DIST_COMMON = $(srcdir)/Makefile.in \ $(srcdir)/libsodium-uninstalled.pc.in \ $(srcdir)/libsodium.pc.in $(top_srcdir)/build-aux/compile \ $(top_srcdir)/build-aux/config.guess \ $(top_srcdir)/build-aux/config.sub \ $(top_srcdir)/build-aux/install-sh \ $(top_srcdir)/build-aux/ltmain.sh \ $(top_srcdir)/build-aux/missing \ $(top_srcdir)/src/libsodium/include/sodium/version.h.in \ AUTHORS ChangeLog THANKS build-aux/compile \ build-aux/config.guess build-aux/config.sub build-aux/depcomp \ build-aux/install-sh build-aux/ltmain.sh build-aux/missing DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -700 -exec chmod u+rwx {} ';' \ ; rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 GZIP_ENV = -9 DIST_TARGETS = dist-bzip2 dist-gzip # Exists only to be overridden by the user if desired. AM_DISTCHECK_DVI_TARGET = dvi distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = \ find . \( -type f -a \! \ \( -name .nfs* -o -name .smb* -o -name .__afs* \) \) -print ACLOCAL = @ACLOCAL@ ALLOCA = @ALLOCA@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCAS = @CCAS@ CCASDEPMODE = @CCASDEPMODE@ CCASFLAGS = @CCASFLAGS@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CFLAGS_AESNI = @CFLAGS_AESNI@ CFLAGS_ARMCRYPTO = @CFLAGS_ARMCRYPTO@ CFLAGS_AVX = @CFLAGS_AVX@ CFLAGS_AVX2 = @CFLAGS_AVX2@ CFLAGS_AVX512F = @CFLAGS_AVX512F@ CFLAGS_MMX = @CFLAGS_MMX@ CFLAGS_PCLMUL = @CFLAGS_PCLMUL@ CFLAGS_RDRAND = @CFLAGS_RDRAND@ CFLAGS_SSE2 = @CFLAGS_SSE2@ CFLAGS_SSE3 = @CFLAGS_SSE3@ CFLAGS_SSE41 = @CFLAGS_SSE41@ CFLAGS_SSSE3 = @CFLAGS_SSSE3@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CSCOPE = @CSCOPE@ CTAGS = @CTAGS@ CWFLAGS = @CWFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DLL_VERSION = @DLL_VERSION@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_VALGRIND_drd = @ENABLE_VALGRIND_drd@ ENABLE_VALGRIND_helgrind = @ENABLE_VALGRIND_helgrind@ ENABLE_VALGRIND_memcheck = @ENABLE_VALGRIND_memcheck@ ENABLE_VALGRIND_sgcheck = @ENABLE_VALGRIND_sgcheck@ ETAGS = @ETAGS@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ FILECMD = @FILECMD@ GREP = @GREP@ HAVE_AMD64_ASM_V = @HAVE_AMD64_ASM_V@ HAVE_AVX_ASM_V = @HAVE_AVX_ASM_V@ HAVE_CPUID_V = @HAVE_CPUID_V@ HAVE_TI_MODE_V = @HAVE_TI_MODE_V@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LIBTOOL_EXTRA_FLAGS = @LIBTOOL_EXTRA_FLAGS@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKGCONFIG_LIBS_PRIVATE = @PKGCONFIG_LIBS_PRIVATE@ PTHREAD_CC = @PTHREAD_CC@ PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ PTHREAD_CXX = @PTHREAD_CXX@ PTHREAD_LIBS = @PTHREAD_LIBS@ RANLIB = @RANLIB@ SAFECODE_HOME = @SAFECODE_HOME@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ SODIUM_LIBRARY_MINIMAL_DEF = @SODIUM_LIBRARY_MINIMAL_DEF@ SODIUM_LIBRARY_VERSION = @SODIUM_LIBRARY_VERSION@ SODIUM_LIBRARY_VERSION_MAJOR = @SODIUM_LIBRARY_VERSION_MAJOR@ SODIUM_LIBRARY_VERSION_MINOR = @SODIUM_LIBRARY_VERSION_MINOR@ STRIP = @STRIP@ TEST_LDFLAGS = @TEST_LDFLAGS@ VALGRIND = @VALGRIND@ VALGRIND_ENABLED = @VALGRIND_ENABLED@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__rm_f_notfound = @am__rm_f_notfound@ am__tar = @am__tar@ am__untar = @am__untar@ am__xargs_n = @am__xargs_n@ ax_pthread_config = @ax_pthread_config@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target = @target@ target_alias = @target_alias@ target_cpu = @target_cpu@ target_os = @target_os@ target_vendor = @target_vendor@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ valgrind_enabled_tools = @valgrind_enabled_tools@ valgrind_tools = @valgrind_tools@ ACLOCAL_AMFLAGS = -I m4 EXTRA_DIST = \ autogen.sh \ build.zig \ ChangeLog \ CITATION.cff \ LICENSE \ README.markdown \ THANKS SUBDIRS = \ builds \ contrib \ dist-build \ src \ test pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = @PACKAGE_NAME@.pc DISTCLEANFILES = $(pkgconfig_DATA) all: all-recursive .SUFFIXES: am--refresh: Makefile @: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): libsodium.pc: $(top_builddir)/config.status $(srcdir)/libsodium.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ libsodium-uninstalled.pc: $(top_builddir)/config.status $(srcdir)/libsodium-uninstalled.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ src/libsodium/include/sodium/version.h: $(top_builddir)/config.status $(top_srcdir)/src/libsodium/include/sodium/version.h.in cd $(top_builddir) && $(SHELL) ./config.status $@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt install-pkgconfigDATA: $(pkgconfig_DATA) @$(NORMAL_INSTALL) @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ done uninstall-pkgconfigDATA: @$(NORMAL_UNINSTALL) @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am distdir-am: $(DISTFILES) $(am__remove_distdir) $(AM_V_at)$(MKDIR_P) "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-bzip3: distdir tardir=$(distdir) && $(am__tar) | bzip3 -c >$(distdir).tar.bz3 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-zstd: distdir tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst $(am__post_remove_distdir) dist-tarZ: distdir @echo WARNING: "Support for distribution archives compressed with" \ "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir @echo WARNING: "Support for shar distribution archives is" \ "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ eval GZIP= gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.bz3*) \ bzip3 -dc $(distdir).tar.bz3 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ eval GZIP= gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ *.tar.zst*) \ zstd -dc $(distdir).tar.zst | $(am__untar) ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build/sub \ && ../../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ --srcdir=../.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile $(DATA) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -$(am__rm_f) $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES) -$(am__rm_f) $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-pkgconfigDATA install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-pkgconfigDATA .MAKE: $(am__recursive_targets) install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ am--refresh check check-am clean clean-cscope clean-generic \ clean-libtool cscope cscopelist-am ctags ctags-am dist \ dist-all dist-bzip2 dist-bzip3 dist-gzip dist-lzip dist-shar \ dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \ distclean-generic distclean-libtool distclean-tags \ distcleancheck distdir distuninstallcheck dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-pkgconfigDATA install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs installdirs-am \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-am uninstall uninstall-am uninstall-pkgconfigDATA .PRECIOUS: Makefile # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: # Tell GNU make to disable its built-in pattern rules. %:: %,v %:: RCS/%,v %:: RCS/% %:: s.% %:: SCCS/s.% libsodium-1.0.22-RELEASE/README.markdown000066400000000000000000000072631516601152600173550ustar00rootroot00000000000000[![GitHub CI](https://github.com/jedisct1/libsodium/workflows/CI/badge.svg)](https://github.com/jedisct1/libsodium/actions) [![Coverity Scan Build Status](https://scan.coverity.com/projects/2397/badge.svg)](https://scan.coverity.com/projects/2397) [![Azure build status](https://jedisct1.visualstudio.com/Libsodium/_apis/build/status/jedisct1.libsodium?branchName=stable)](https://jedisct1.visualstudio.com/Libsodium/_build/latest?definitionId=3&branchName=stable) [![CodeQL scan](https://github.com/jedisct1/libsodium/workflows/CodeQL%20scan/badge.svg)](https://github.com/jedisct1/libsodium/actions) # ![libsodium](https://raw.github.com/jedisct1/libsodium/master/logo.png) Sodium is an easy-to-use software library that provides a wide range of cryptographic operations including encryption, decryption, digital signatures, and secure password hashing. It is a portable, cross-compilable, installable, and packageable fork of [NaCl](http://nacl.cr.yp.to/). While maintaining API compatibility, libsodium extends functionality to improve usability and simplify the development of secure applications. --- ## Key Features - **Encryption & Decryption:** Securely encrypt and decrypt data with modern algorithms. - **Digital Signatures:** Create and verify signatures to ensure data authenticity. - **Cross-Platform Compatibility:** Supported on Windows (MinGW and Visual Studio, x86, x64 and arm64), iOS, Android, JavaScript, and WebAssembly. - **User-Friendly API:** Designed to provide all core cryptographic operations while remaining easy to integrate into your projects. --- ## Documentation - [Installation](https://doc.libsodium.org/installation) - [Quickstart](https://doc.libsodium.org/quickstart) - [Full Documentation](https://doc.libsodium.org) - [Releases](https://download.libsodium.org/libsodium/releases/) - [Integrity Checking](https://doc.libsodium.org/installation#integrity-checking) --- ## Versioning libsodium uses a two-tier release system: - **Point releases** (e.g., 1.0.19, 1.0.20, 1.0.21) are tagged when new features are added or significant changes are made. - **Stable releases** are frequent maintainance updates between point releases. They fix minor issues while remaining fully compatible with their parent point release. No new features, no breaking changes. If your application depends on a specific point release, stable updates are safe to apply. Security fixes go to the `stable` branch immediately, with a new point release tagged shortly after. --- ## Contributors ### Code Contributors This project thrives thanks to the valuable contributions from our community. View all the [contributors](https://github.com/jedisct1/libsodium/graphs/contributors): Contributors ### Financial Contributors Your financial support helps us sustain and further develop libsodium. - [Become a Financial Contributor](https://opencollective.com/libsodium/contribute) #### Individuals Individual Contributors #### Organizations Support libsodium with your organization and gain visibility through your logo and website link. - [Support with Your Organization](https://opencollective.com/libsodium/contribute) Organization Contributor --- ## License This project is distributed under the [ISC license](https://en.wikipedia.org/wiki/ISC_license). libsodium-1.0.22-RELEASE/THANKS000066400000000000000000000054241516601152600155640ustar00rootroot00000000000000Special thanks to people, companies and organizations having written libsodium bindings for their favorite programming languages: @ada23 @alethia7 @artemisc @buu700 @carblue @Chewhern @didactic-drunk @dnaq @ektrah @freevryheid @graxrabble @gryor @harleqin @Jack-Edwards @joshjdevl @jprjr @jrmarino @jshahbazi @k0001 @lvh @muquit @neheb @rj-calvin @tom25519 Adam Caudill (@adamcaudill) Alexander Ilin (@AlexIljin) Alexander Morris (@alexpmorris) Amit Murthy (@amitmurthy) Andrew Bennett (@potatosalad) Andrew Lambert (@charonn0) Brad Barden (@IAMB) Bruce Mitchener (@waywardmonkeys) Bruno Oliveira (@abstractj) Caolan McMahon (@caolan) Chris Rebert (@cvrebert) Christian Hermann (@bitbeans) Christian Wiese (@morfoh) Colm MacCárthaigh (@colmmacc) David Parrish (@dmp1ce) Donald Stufft (@dstufft) Douglas Campos (@qmx) Drew Crawford (@drewcrawford) Emil Bay (@emilbayes) Eric Dong (@quantum1423) Eric Voskuil (@evoskuil) Farid Hajji (@fhajji) Felix Brandtner (@Skycoder42) Frank Siebenlist (@franks42) Gabriel Handford (@gabriel) Geo Carncross (@geocar) Gurpreet Paul (@gurpreet-) Henrik Gassmann (BurningEnlightenment) Jachym Holecek (@freza) Jack Wink (@jackwink) Jaco Malan (@JacoMalan1) James Ruan (@jamesruan) Jan de Muijnck-Hughes (@jfdm) Jason McCampbell (@jasonmccampbell) Jeroen Habraken (@VeXocide) Jeroen Ooms (@jeroen) Jesper Louis Andersen (@jlouis) Joe Eli McIlvain (@jemc) Jonathan Stowe (@jonathanstowe) Joseph Abrahamson (@tel) Julien Kauffmann (@ereOn) Kenneth Ballenegger (@kballenegger) Loic Maury (@loicmaury) Mathias Lang (@Geod24) Michael Gorlick (@mgorlick) Michael Gregorowicz (@mgregoro) Michał Zieliński (@zielmicha) Omar Ayub (@electricFeel) Paul Kehrer (@reaperhulk) Pedro Paixao (@paixaop) Pierre Yager (@zedalaye) Project ArteMisc (@artemisc) Rich FitzJohn (@richfitz) Ruben De Visscher (@rubendv) Rudolf Von Krugstein (@rudolfvonkrugstein) Samuel Lucas (@samuel-lucas6) Samuel Neves (@sneves) Scott Arciszewski (@paragonie-scott) Soatok Dreamseeker (@soatok) Stanislav Ovsiannikov (@naphaso) Stefan Marsiske (@stef) Stephan Touset (@stouset) Stephen Chavez (@redragonx) Steve Gibson (@sggrc) Thomas S Hatch (@thatch45) Tony Arcieri (@bascule) Tony Garnock-Jones (@tonyg) Ugljesa Jovanovic (@ionspin) Y. T. Chung (@zonyitoo) BetterCallSodium BundleFeed Bytecurry Software Cryptotronix Facebook FSF France Haskell Cryptography Group Holochain Holepunch MaidSafe Object Guild Paragonie Initiative Enterprises Python Cryptographic Authority r-lib rOpenSci RubyCrypto SaltStack Serokell Space Wizards Terl Vlang (this list may not be complete, if you don't see your name, please submit a pull request!) Also thanks to: - Coverity, Inc. to provide static analysis. - FSF France for providing access to their compilation servers. - Private Internet Access for having sponsored a complete security audit. libsodium-1.0.22-RELEASE/aclocal.m4000066400000000000000000001456631516601152600165230ustar00rootroot00000000000000# generated automatically by aclocal 1.18.1 -*- Autoconf -*- # Copyright (C) 1996-2025 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.73],, [m4_warning([this file was generated for autoconf 2.73. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically 'autoreconf'.])]) # Copyright (C) 2002-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.18' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.18.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.18.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # Figure out how to run the assembler. -*- Autoconf -*- # Copyright (C) 2001-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_AS # ---------- AC_DEFUN([AM_PROG_AS], [# By default we simply use the C compiler to build assembly code. AC_REQUIRE([AC_PROG_CC]) test "${CCAS+set}" = set || CCAS=$CC test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS AC_ARG_VAR([CCAS], [assembler compiler command (defaults to CC)]) AC_ARG_VAR([CCASFLAGS], [assembler compiler flags (defaults to CFLAGS)]) _AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES([CCAS])])dnl ]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to # '$srcdir', '$srcdir/..', or '$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is '.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl # Expand $ac_aux_dir to an absolute path. am_aux_dir=`cd "$ac_aux_dir" && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ([2.52])dnl m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], [$1], [CXX], [depcc="$CXX" am_compiler_list=], [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], [$1], [UPC], [depcc="$UPC" am_compiler_list=], [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi am__universal=false m4_case([$1], [CC], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac], [CXX], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac]) for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thus: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES. AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE([dependency-tracking], [dnl AS_HELP_STRING( [--enable-dependency-tracking], [do not reject slow dependency extractors]) AS_HELP_STRING( [--disable-dependency-tracking], [speeds up one-time build])]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl AC_SUBST([am__nodep])dnl _AM_SUBST_NOTMAKE([am__nodep])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. # TODO: see whether this extra hack can be removed once we start # requiring Autoconf 2.70 or later. AS_CASE([$CONFIG_FILES], [*\'*], [eval set x "$CONFIG_FILES"], [*], [set x $CONFIG_FILES]) shift # Used to flag and report bootstrapping failures. am_rc=0 for am_mf do # Strip MF so we end up with the name of the file. am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile which includes # dependency-tracking related rules and includes. # Grep'ing the whole file directly is not great: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ || continue am_dirpart=`AS_DIRNAME(["$am_mf"])` am_filepart=`AS_BASENAME(["$am_mf"])` AM_RUN_LOG([cd "$am_dirpart" \ && sed -e '/# am--include-marker/d' "$am_filepart" \ | $MAKE -f - am--depfiles]) || am_rc=$? done if test $am_rc -ne 0; then AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments for automatic dependency tracking. If GNU make was not used, consider re-running the configure script with MAKE="gmake" (or whatever is necessary). You can also try re-running configure with the '--disable-dependency-tracking' option to at least be able to build the package (albeit without support for automatic dependency tracking).]) fi AS_UNSET([am_dirpart]) AS_UNSET([am_filepart]) AS_UNSET([am_mf]) AS_UNSET([am_rc]) rm -f conftest-deps.mk } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking is enabled. # This creates each '.Po' and '.Plo' makefile fragment that we'll need in # order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC]) [_AM_PROG_CC_C_O ]) # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.65])dnl m4_ifdef([_$0_ALREADY_INIT], [m4_fatal([$0 expanded multiple times ]m4_defn([_$0_ALREADY_INIT]))], [m4_define([_$0_ALREADY_INIT], m4_expansion_stack)])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [AC_DIAGNOSE([obsolete], [$0: two- and three-arguments forms are deprecated.]) m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if( m4_ifset([AC_PACKAGE_NAME], [ok]):m4_ifset([AC_PACKAGE_VERSION], [ok]), [ok:ok],, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) AM_MISSING_PROG([AUTOCONF], [autoconf]) AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) AM_MISSING_PROG([AUTOHEADER], [autoheader]) AM_MISSING_PROG([MAKEINFO], [makeinfo]) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # AC_SUBST([mkdir_p], ['$(MKDIR_P)']) # We need awk for the "check" target (and possibly the TAP driver). The # system "awk" is bad on some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_IF_OPTION([tar-v7], [_AM_PROG_TAR([v7])], [_AM_PROG_TAR([ustar])])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES([CC])], [m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES([CXX])], [m4_define([AC_PROG_CXX], m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES([OBJC])], [m4_define([AC_PROG_OBJC], m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], [_AM_DEPENDENCIES([OBJCXX])], [m4_define([AC_PROG_OBJCXX], m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl ]) # Variables for tags utilities; see am/tags.am if test -z "$CTAGS"; then CTAGS=ctags fi AC_SUBST([CTAGS]) if test -z "$ETAGS"; then ETAGS=etags fi AC_SUBST([ETAGS]) if test -z "$CSCOPE"; then CSCOPE=cscope fi AC_SUBST([CSCOPE]) AC_REQUIRE([_AM_SILENT_RULES])dnl dnl The testsuite driver may need to know about EXEEXT, so add the dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl AC_REQUIRE([_AM_PROG_RM_F]) AC_REQUIRE([_AM_PROG_XARGS_N]) dnl The trailing newline in this macro's definition is deliberate, for dnl backward compatibility and to allow trailing 'dnl'-style comments dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. ]) dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi AC_SUBST([install_sh])]) # Copyright (C) 2003-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- # From Jim Meyering # Copyright (C) 1996-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MAINTAINER_MODE([DEFAULT-MODE]) # ---------------------------------- # Control maintainer-specific portions of Makefiles. # Default is to disable them, unless 'enable' is passed literally. # For symmetry, 'disable' may be passed as well. Anyway, the user # can override the default with the --enable/--disable switch. AC_DEFUN([AM_MAINTAINER_MODE], [m4_case(m4_default([$1], [disable]), [enable], [m4_define([am_maintainer_other], [disable])], [disable], [m4_define([am_maintainer_other], [enable])], [m4_define([am_maintainer_other], [enable]) m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) dnl maintainer-mode's default is 'disable' unless 'enable' is passed AC_ARG_ENABLE([maintainer-mode], [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], am_maintainer_other[ make rules and dependencies not useful (and sometimes confusing) to the casual installer])], [USE_MAINTAINER_MODE=$enableval], [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) AC_MSG_RESULT([$USE_MAINTAINER_MODE]) AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) MAINT=$MAINTAINER_MODE_TRUE AC_SUBST([MAINT])dnl ] ) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MAKE_INCLUDE() # ----------------- # Check whether make has an 'include' directive that can support all # the idioms we need for our automatic dependency tracking code. AC_DEFUN([AM_MAKE_INCLUDE], [AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive]) cat > confinc.mk << 'END' am__doit: @echo this is the am__doit target >confinc.out .PHONY: am__doit END am__include="#" am__quote= # BSD make does it like this. echo '.include "confinc.mk" # ignored' > confmf.BSD # Other make implementations (GNU, Solaris 10, AIX) do it like this. echo 'include confinc.mk # ignored' > confmf.GNU _am_result=no for s in GNU BSD; do AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out]) AS_CASE([$?:`cat confinc.out 2>/dev/null`], ['0:this is the am__doit target'], [AS_CASE([$s], [BSD], [am__include='.include' am__quote='"'], [am__include='include' am__quote=''])]) if test "$am__include" != "#"; then _am_result="yes ($s style)" break fi done rm -f confinc.* confmf.* AC_MSG_RESULT([${_am_result}]) AC_SUBST([am__include])]) AC_SUBST([am__quote])]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it is modern enough. # If it is, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl if test x"${MISSING+set}" != xset; then MISSING="\${SHELL} '$am_aux_dir/missing'" fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= AC_MSG_WARN(['missing' script is too old or missing]) fi ]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # -------------------- # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), [1])]) # _AM_SET_OPTIONS(OPTIONS) # ------------------------ # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Copyright (C) 1999-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_CC_C_O # --------------- # Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC # to automatically call this. AC_DEFUN([_AM_PROG_CC_C_O], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([compile])dnl AC_LANG_PUSH([C])dnl AC_CACHE_CHECK( [whether $CC understands -c and -o together], [am_cv_prog_cc_c_o], [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done # aligned with autoconf, so not including core; see bug#72225. rm -f -r a.out a.exe b.out conftest.$ac_ext conftest.$ac_objext \ conftest.dSYM conftest1.$ac_ext conftest1.$ac_objext conftest1.dSYM \ conftest2.$ac_ext conftest2.$ac_objext conftest2.dSYM unset am_i]) if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi AC_LANG_POP([C])]) # For backward compatibility. AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) # Copyright (C) 2022-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_RM_F # --------------- # Check whether 'rm -f' without any arguments works. # https://bugs.gnu.org/10828 AC_DEFUN([_AM_PROG_RM_F], [am__rm_f_notfound= AS_IF([(rm -f && rm -fr && rm -rf) 2>/dev/null], [], [am__rm_f_notfound='""']) AC_SUBST(am__rm_f_notfound) ]) # Copyright (C) 2001-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_RUN_LOG(COMMAND) # ------------------- # Run COMMAND, save the exit status in ac_status, and log it. # (This has been adapted from Autoconf's _AC_RUN_LOG macro.) AC_DEFUN([AM_RUN_LOG], [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD (exit $ac_status); }]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_SLEEP_FRACTIONAL_SECONDS # ---------------------------- AC_DEFUN([_AM_SLEEP_FRACTIONAL_SECONDS], [dnl AC_CACHE_CHECK([whether sleep supports fractional seconds], am_cv_sleep_fractional_seconds, [dnl AS_IF([sleep 0.001 2>/dev/null], [am_cv_sleep_fractional_seconds=yes], [am_cv_sleep_fractional_seconds=no]) ])]) # _AM_FILESYSTEM_TIMESTAMP_RESOLUTION # ----------------------------------- # Determine the filesystem's resolution for file modification # timestamps. The coarsest we know of is FAT, with a resolution # of only two seconds, even with the most recent "exFAT" extensions. # The finest (e.g. ext4 with large inodes, XFS, ZFS) is one # nanosecond, matching clock_gettime. However, it is probably not # possible to delay execution of a shell script for less than one # millisecond, due to process creation overhead and scheduling # granularity, so we don't check for anything finer than that. (See below.) AC_DEFUN([_AM_FILESYSTEM_TIMESTAMP_RESOLUTION], [dnl AC_REQUIRE([_AM_SLEEP_FRACTIONAL_SECONDS]) AC_CACHE_CHECK([filesystem timestamp resolution], am_cv_filesystem_timestamp_resolution, [dnl # Default to the worst case. am_cv_filesystem_timestamp_resolution=2 # Only try to go finer than 1 sec if sleep can do it. # Don't try 1 sec, because if 0.01 sec and 0.1 sec don't work, # - 1 sec is not much of a win compared to 2 sec, and # - it takes 2 seconds to perform the test whether 1 sec works. # # Instead, just use the default 2s on platforms that have 1s resolution, # accept the extra 1s delay when using $sleep in the Automake tests, in # exchange for not incurring the 2s delay for running the test for all # packages. # am_try_resolutions= if test "$am_cv_sleep_fractional_seconds" = yes; then # Even a millisecond often causes a bunch of false positives, # so just try a hundredth of a second. The time saved between .001 and # .01 is not terribly consequential. am_try_resolutions="0.01 0.1 $am_try_resolutions" fi # In order to catch current-generation FAT out, we must *modify* files # that already exist; the *creation* timestamp is finer. Use names # that make ls -t sort them differently when they have equal # timestamps than when they have distinct timestamps, keeping # in mind that ls -t prints the *newest* file first. rm -f conftest.ts? : > conftest.ts1 : > conftest.ts2 : > conftest.ts3 # Make sure ls -t actually works. Do 'set' in a subshell so we don't # clobber the current shell's arguments. (Outer-level square brackets # are removed by m4; they're present so that m4 does not expand # ; be careful, easy to get confused.) if ( set X `[ls -t conftest.ts[12]]` && { test "$[]*" != "X conftest.ts1 conftest.ts2" || test "$[]*" != "X conftest.ts2 conftest.ts1"; } ); then :; else # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". _AS_ECHO_UNQUOTED( ["Bad output from ls -t: \"`[ls -t conftest.ts[12]]`\""], [AS_MESSAGE_LOG_FD]) AC_MSG_FAILURE([ls -t produces unexpected output. Make sure there is not a broken ls alias in your environment.]) fi for am_try_res in $am_try_resolutions; do # Any one fine-grained sleep might happen to cross the boundary # between two values of a coarser actual resolution, but if we do # two fine-grained sleeps in a row, at least one of them will fall # entirely within a coarse interval. echo alpha > conftest.ts1 sleep $am_try_res echo beta > conftest.ts2 sleep $am_try_res echo gamma > conftest.ts3 # We assume that 'ls -t' will make use of high-resolution # timestamps if the operating system supports them at all. if (set X `ls -t conftest.ts?` && test "$[]2" = conftest.ts3 && test "$[]3" = conftest.ts2 && test "$[]4" = conftest.ts1); then # # Ok, ls -t worked. If we're at a resolution of 1 second, we're done, # because we don't need to test make. make_ok=true if test $am_try_res != 1; then # But if we've succeeded so far with a subsecond resolution, we # have one more thing to check: make. It can happen that # everything else supports the subsecond mtimes, but make doesn't; # notably on macOS, which ships make 3.81 from 2006 (the last one # released under GPLv2). https://bugs.gnu.org/68808 # # We test $MAKE if it is defined in the environment, else "make". # It might get overridden later, but our hope is that in practice # it does not matter: it is the system "make" which is (by far) # the most likely to be broken, whereas if the user overrides it, # probably they did so with a better, or at least not worse, make. # https://lists.gnu.org/archive/html/automake/2024-06/msg00051.html # # Create a Makefile (real tab character here): rm -f conftest.mk echo 'conftest.ts1: conftest.ts2' >conftest.mk echo ' touch conftest.ts2' >>conftest.mk # # Now, running # touch conftest.ts1; touch conftest.ts2; make # should touch ts1 because ts2 is newer. This could happen by luck, # but most often, it will fail if make's support is insufficient. So # test for several consecutive successes. # # (We reuse conftest.ts[12] because we still want to modify existing # files, not create new ones, per above.) n=0 make=${MAKE-make} until test $n -eq 3; do echo one > conftest.ts1 sleep $am_try_res echo two > conftest.ts2 # ts2 should now be newer than ts1 if $make -f conftest.mk | grep 'up to date' >/dev/null; then make_ok=false break # out of $n loop fi n=`expr $n + 1` done fi # if $make_ok; then # Everything we know to check worked out, so call this resolution good. am_cv_filesystem_timestamp_resolution=$am_try_res break # out of $am_try_res loop fi # Otherwise, we'll go on to check the next resolution. fi done rm -f conftest.ts? # (end _am_filesystem_timestamp_resolution) ])]) # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_REQUIRE([_AM_FILESYSTEM_TIMESTAMP_RESOLUTION]) # This check should not be cached, as it may vary across builds of # different projects. AC_MSG_CHECKING([whether build environment is sane]) # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) AC_MSG_RESULT([no]) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) AC_MSG_RESULT([no]) AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). am_build_env_is_sane=no am_has_slept=no rm -f conftest.file for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file if ( set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[]*" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi test "$[]2" = conftest.file ); then am_build_env_is_sane=yes break fi # Just in case. sleep "$am_cv_filesystem_timestamp_resolution" am_has_slept=yes done AC_MSG_RESULT([$am_build_env_is_sane]) if test "$am_build_env_is_sane" = no; then AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= AS_IF([test -e conftest.file || grep 'slept: no' conftest.file >/dev/null 2>&1],, [dnl ( sleep "$am_cv_filesystem_timestamp_resolution" ) & am_sleep_pid=$! ]) AC_CONFIG_COMMANDS_PRE( [AC_MSG_CHECKING([that generated files are newer than configure]) if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi AC_MSG_RESULT([done])]) rm -f conftest.file ]) # Copyright (C) 2009-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_SILENT_RULES # ---------------- # Enable less verbose build rules support. AC_DEFUN([_AM_SILENT_RULES], [AM_DEFAULT_VERBOSITY=1 AC_ARG_ENABLE([silent-rules], [dnl AS_HELP_STRING( [--enable-silent-rules], [less verbose build output (undo: "make V=1")]) AS_HELP_STRING( [--disable-silent-rules], [verbose build output (undo: "make V=0")])dnl ]) dnl dnl A few 'make' implementations (e.g., NonStop OS and NextStep) dnl do not support nested variable expansions. dnl See automake bug#9928 and bug#10237. am_make=${MAKE-make} AC_CACHE_CHECK([whether $am_make supports nested variables], [am_cv_make_support_nested_variables], [if AS_ECHO([['TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi]) AC_SUBST([AM_V])dnl AM_SUBST_NOTMAKE([AM_V])dnl AC_SUBST([AM_DEFAULT_V])dnl AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl AC_SUBST([AM_DEFAULT_VERBOSITY])dnl AM_BACKSLASH='\' AC_SUBST([AM_BACKSLASH])dnl _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl dnl Delay evaluation of AM_DEFAULT_VERBOSITY to the end to allow multiple calls dnl to AM_SILENT_RULES to change the default value. AC_CONFIG_COMMANDS_PRE([dnl case $enable_silent_rules in @%:@ ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; esac if test $am_cv_make_support_nested_variables = yes; then dnl Using '$V' instead of '$(V)' breaks IRIX make. AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi ])dnl ]) # AM_SILENT_RULES([DEFAULT]) # -------------------------- # Set the default verbosity level to DEFAULT ("yes" being less verbose, "no" or # empty being verbose). AC_DEFUN([AM_SILENT_RULES], [AC_REQUIRE([_AM_SILENT_RULES]) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1])m4_newline dnl We intentionally force a newline after the assignment, since a) nothing dnl good can come of more text following, and b) that was the behavior dnl before 1.17. See https://bugs.gnu.org/72267. ]) # Copyright (C) 2001-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor 'install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in "make install-strip", and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # AM_SUBST_NOTMAKE(VARIABLE) # -------------------------- # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of 'v7', 'ustar', or 'pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar # AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AC_SUBST([AMTAR], ['$${TAR-tar}']) # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' m4_if([$1], [v7], [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], [m4_case([$1], [ustar], [# The POSIX 1988 'ustar' format is defined with fixed-size fields. # There is notably a 21 bits limit for the UID and the GID. In fact, # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 # and bug#13588). am_max_uid=2097151 # 2^21 - 1 am_max_gid=$am_max_uid # The $UID and $GID variables are not portable, so we need to resort # to the POSIX-mandated id(1) utility. Errors in the 'id' calls # below are definitely unexpected, so allow the users to see them # (that is, avoid stderr redirection). am_uid=`id -u || echo unknown` am_gid=`id -g || echo unknown` AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) if test x$am_uid = xunknown; then AC_MSG_WARN([ancient id detected; assuming current UID is ok, but dist-ustar might not work]) elif test $am_uid -le $am_max_uid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) if test x$gm_gid = xunknown; then AC_MSG_WARN([ancient id detected; assuming current GID is ok, but dist-ustar might not work]) elif test $am_gid -le $am_max_gid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi], [pax], [], [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Go ahead even if we have the value already cached. We do so because we # need to set the values for the 'am__tar' and 'am__untar' variables. _am_tools=${am_cv_prog_tar_$1-$_am_tools} for _am_tool in $_am_tools; do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works. rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR # Copyright (C) 2022-2025 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_XARGS_N # ---------------- # Check whether 'xargs -n' works. It should work everywhere, so the fallback # is not optimized at all as we never expect to use it. AC_DEFUN([_AM_PROG_XARGS_N], [AC_CACHE_CHECK([xargs -n works], am_cv_xargs_n_works, [dnl AS_IF([test "`echo 1 2 3 | xargs -n2 echo`" = "1 2 3"], [am_cv_xargs_n_works=yes], [am_cv_xargs_n_works=no])]) AS_IF([test "$am_cv_xargs_n_works" = yes], [am__xargs_n='xargs -n'], [dnl am__xargs_n='am__xargs_n () { shift; sed "s/ /\\n/g" | while read am__xargs_n_arg; do "$@" "$am__xargs_n_arg"; done; }' ])dnl AC_SUBST(am__xargs_n) ]) m4_include([m4/ax_add_fortify_source.m4]) m4_include([m4/ax_check_catchable_abrt.m4]) m4_include([m4/ax_check_catchable_segv.m4]) m4_include([m4/ax_check_compile_flag.m4]) m4_include([m4/ax_check_define.m4]) m4_include([m4/ax_check_link_flag.m4]) m4_include([m4/ax_pthread.m4]) m4_include([m4/ax_tls.m4]) m4_include([m4/ax_valgrind_check.m4]) m4_include([m4/ld-output-def.m4]) m4_include([m4/libtool.m4]) m4_include([m4/ltoptions.m4]) m4_include([m4/ltsugar.m4]) m4_include([m4/ltversion.m4]) m4_include([m4/lt~obsolete.m4]) libsodium-1.0.22-RELEASE/appveyor.yml000066400000000000000000000006301516601152600172330ustar00rootroot00000000000000version: 1.0.22.{build} os: Visual Studio 2022 environment: matrix: - platform: Win32 configuration: Debug - platform: Win32 configuration: Release - platform: x64 configuration: Debug - platform: x64 configuration: Release matrix: fast_finish: false init: msbuild /version build: parallel: true project: ci/appveyor/libsodium.vcxproj verbosity: normal libsodium-1.0.22-RELEASE/autogen.sh000077500000000000000000000053301516601152600166460ustar00rootroot00000000000000#! /bin/sh args=$(getopt bfos "$@") if [ $? -ne 0 ]; then echo "Usage: autogen.sh [-b] [-f] [-o] [-s] [--]" echo echo "> -b: do not update the system detection scripts" echo "> -f: force the recreation of all autoconf scripts" echo "> -o: overwrite/downgrade system detection scripts" echo "> -s: setup an environment for developers" exit 2 fi force=false update_config=true overwrite_config=false dev_setup=false eval set -- "$args" while [ $# -ne 0 ]; do case $1 in -b) update_config=false ;; -f) force=true ;; -o) overwrite_config=true ;; -s) dev_setup=true ;; --) shift break ;; esac shift done if [ -s configure ]; then if [ "$force" != true ]; then echo "autoconf scripts already exist." >&2 exit 0 fi elif [ "$dev_setup" != true ]; then echo "A development environment was not created." exit 0 fi if glibtoolize --version >/dev/null 2>&1; then LIBTOOLIZE='glibtoolize' else LIBTOOLIZE='libtoolize' fi command -v command >/dev/null 2>&1 || { echo "command is required, but wasn't found on this system" exit 1 } command -v $LIBTOOLIZE >/dev/null 2>&1 || { echo "libtool is required, but wasn't found on this system" exit 1 } command -v autoconf >/dev/null 2>&1 || { echo "autoconf is required, but wasn't found on this system" exit 1 } command -v automake >/dev/null 2>&1 || { echo "automake is required, but wasn't found on this system" exit 1 } if [ "$overwrite_config" = false ]; then if [ -f build-aux/config.guess ]; then mv build-aux/config.guess build-aux/config.guess.stable fi if [ -f build-aux/config.sub ]; then mv build-aux/config.sub build-aux/config.sub.stable fi else rm -fr build-aux fi $LIBTOOLIZE --copy --install && aclocal && automake --add-missing --copy --force-missing --include-deps && autoconf && echo Done. if [ "$overwrite_config" = false ]; then if [ -f build-aux/config.guess.stable ]; then mv build-aux/config.guess.stable build-aux/config.guess fi if [ -f build-aux/config.sub.stable ]; then mv build-aux/config.sub.stable build-aux/config.sub fi fi [ "$update_config" = true ] && [ -z "$DO_NOT_UPDATE_CONFIG_SCRIPTS" ] && command -v curl >/dev/null 2>&1 && { echo "Downloading config.guess and config.sub..." curl -sSL --fail -o config.guess \ 'https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD' && chmod +x config.guess && chmod +x build-aux/config.guess curl -sSL --fail -o config.sub \ 'https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD' && chmod +x build-aux/config.sub && mv -f config.sub build-aux/config.sub echo "Done." } rm -f config.guess config.sub libsodium-1.0.22-RELEASE/azure-pipelines.yml000066400000000000000000000134011516601152600205020ustar00rootroot00000000000000trigger: - stable - next pr: none jobs: - job: "windows" pool: vmImage: "windows-latest" steps: - powershell: | cd builds\msvc\build & .\buildbase.bat ..\vs2026\libsodium.sln 18 displayName: Compile it all - powershell: | mkdir bin\include\sodium Copy-Item "src\libsodium\include\sodium\*.h" -Destination "bin\include\sodium" -Recurse Copy-Item "src\libsodium\include\*.h" -Destination "bin\include\" displayName: Copy header files - task: PublishBuildArtifacts@1 condition: not(canceled()) inputs: pathToPublish: bin artifactName: libsodium - job: "windows_2022" pool: vmImage: "windows-2022" steps: - powershell: | cd builds\msvc\build & .\buildbase.bat ..\vs2022\libsodium.sln 17 displayName: Compile it all - powershell: | mkdir bin\include\sodium Copy-Item "src\libsodium\include\sodium\*.h" -Destination "bin\include\sodium" -Recurse Copy-Item "src\libsodium\include\*.h" -Destination "bin\include\" displayName: Copy header files - task: PublishBuildArtifacts@1 condition: not(canceled()) inputs: pathToPublish: bin artifactName: libsodium - job: "windows_2019" pool: vmImage: "windows-2022" steps: - powershell: | choco install visualstudio2019buildtools --package-parameters "--add Microsoft.VisualStudio.Workload.VCTools --includeRecommended --quiet --wait" -y displayName: Install VS2019 Build Tools - powershell: | cd builds\msvc\build & .\buildbase.bat ..\vs2019\libsodium.sln 16 displayName: Compile it all - powershell: | mkdir bin\include\sodium Copy-Item "src\libsodium\include\sodium\*.h" -Destination "bin\include\sodium" -Recurse Copy-Item "src\libsodium\include\*.h" -Destination "bin\include\" displayName: Copy header files - task: PublishBuildArtifacts@1 condition: not(canceled()) inputs: pathToPublish: bin artifactName: libsodium - job: mingw64 pool: vmImage: "windows-2022" steps: - powershell: | (New-Object Net.WebClient).DownloadFile("https://github.com/msys2/msys2-installer/releases/download/2026-03-22/msys2-base-x86_64-20260322.sfx.exe", "sfx.exe") .\sfx.exe -y -o\ del sfx.exe displayName: Install MSYS2 - script: | set PATH=%CD:~0,2%\msys64\usr\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem %CD:~0,2%\msys64\usr\bin\bash -lc %CD:~0,2%\msys64\usr\bin\bash -lc "pacman --noconfirm -Sydd filesystem" %CD:~0,2%\msys64\usr\bin\bash -lc 'pacman --noconfirm -Syuu' %CD:~0,2%\msys64\usr\bin\bash -lc 'pacman --noconfirm -Syuu' displayName: Update MSYS2 - script: | set PATH=%CD:~0,2%\msys64\usr\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem %CD:~0,2%\msys64\usr\bin\pacman --noconfirm --needed -S base-devel mingw-w64-x86_64-toolchain %CD:~0,2%\msys64\usr\bin\pacman --noconfirm -Scc %CD:~0,2%\msys64\usr\bin\sed -i "s|#CacheDir.*|CacheDir=/c/Users/%USERNAME%/AppData/Local/Temp|g" /etc/pacman.conf displayName: Install Toolchain - script: | set PATH=C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;%CD:~0,2%\msys64\usr\bin;%CD:~0,2%\msys64\bin set MSYS2_ROOT=%CD:~0,2%\msys64 set MSYSTEM=MINGW64 set CHERE_INVOKING=yes %MSYS2_ROOT%\cmd\msystem MINGW64 %CD:~0,2%\msys64\usr\bin\bash -lc dist-build/msys2-win64.sh env: CHERE_INVOKING: yes MSYS2_ARCH: x86_64 displayName: Compile libsodium - task: PublishBuildArtifacts@1 condition: not(canceled()) inputs: pathToPublish: libsodium-win64 artifactName: libsodium-win64 - job: mingw32 pool: vmImage: "windows-2022" steps: - powershell: | (New-Object Net.WebClient).DownloadFile("https://github.com/msys2/msys2-installer/releases/download/2026-03-22/msys2-base-x86_64-20260322.sfx.exe", "sfx.exe") .\sfx.exe -y -o\ del sfx.exe displayName: Install MSYS2 - script: | set PATH=%CD:~0,2%\msys64\usr\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem %CD:~0,2%\msys64\usr\bin\bash -lc %CD:~0,2%\msys64\usr\bin\bash -lc "pacman --noconfirm -Sydd filesystem" %CD:~0,2%\msys64\usr\bin\bash -lc 'pacman --noconfirm -Syuu' %CD:~0,2%\msys64\usr\bin\bash -lc 'pacman --noconfirm -Syuu' displayName: Update MSYS2 - script: | set PATH=%CD:~0,2%\msys64\usr\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem %CD:~0,2%\msys64\usr\bin\pacman --noconfirm --needed -S base-devel mingw-w64-i686-toolchain %CD:~0,2%\msys64\usr\bin\pacman --noconfirm -Scc %CD:~0,2%\msys64\usr\bin\sed -i "s|#CacheDir.*|CacheDir=/c/Users/%USERNAME%/AppData/Local/Temp|g" /etc/pacman.conf displayName: Install Toolchain - script: | set PATH=C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;%CD:~0,2%\msys64\usr\bin;%CD:~0,2%\msys64\bin set MSYS2_ROOT=%CD:~0,2%\msys64 set MSYSTEM=MINGW32 set CHERE_INVOKING=yes %MSYS2_ROOT%\cmd\msystem MINGW32 %CD:~0,2%\msys64\usr\bin\bash -lc dist-build/msys2-win32.sh env: CHERE_INVOKING: yes MSYS2_ARCH: x86_64 displayName: Compile libsodium - task: PublishBuildArtifacts@1 condition: not(canceled()) inputs: pathToPublish: libsodium-win32 artifactName: libsodium-win32 libsodium-1.0.22-RELEASE/build-aux/000077500000000000000000000000001516601152600165365ustar00rootroot00000000000000libsodium-1.0.22-RELEASE/build-aux/compile000077500000000000000000000176001516601152600201200ustar00rootroot00000000000000#! /bin/sh # Wrapper for compilers which do not understand '-c -o'. scriptversion=2025-06-18.21; # UTC # Copyright (C) 1999-2025 Free Software Foundation, Inc. # Written by Tom Tromey . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # This file is maintained in Automake, please report # bugs to or send patches to # . nl=' ' # We need space, tab and new line, in precisely that order. Quoting is # there to prevent tools from complaining about whitespace usage. IFS=" "" $nl" file_conv= # func_file_conv build_file unneeded_conversions # Convert a $build file to $host form and store it in $file # Currently only supports Windows hosts. If the determined conversion # type is listed in (the comma separated) UNNEEDED_CONVERSIONS, no # conversion will take place. func_file_conv () { file=$1 case $file in / | /[!/]*) # absolute file, and not a UNC file if test -z "$file_conv"; then # lazily determine how to convert abs files case `uname -s` in MINGW*) if test -n "$MSYSTEM" && (cygpath --version) >/dev/null 2>&1; then # MSYS2 environment. file_conv=cygwin else # Original MinGW environment. file_conv=mingw fi ;; MSYS*) # Old MSYS environment, or MSYS2 with 32-bit MSYS2 shell. file_conv=cygwin ;; CYGWIN*) # Cygwin environment. file_conv=cygwin ;; *) file_conv=wine ;; esac fi case $file_conv/,$2, in *,$file_conv,*) # This is the optimization mentioned above: # If UNNEEDED_CONVERSIONS contains $file_conv, don't convert. ;; mingw/*) file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` ;; cygwin/*) file=`cygpath -w "$file" || echo "$file"` ;; wine/*) file=`winepath -w "$file" || echo "$file"` ;; esac ;; esac } # func_cl_dashL linkdir # Make cl look for libraries in LINKDIR func_cl_dashL () { func_file_conv "$1" if test -z "$lib_path"; then lib_path=$file else lib_path="$lib_path;$file" fi linker_opts="$linker_opts -LIBPATH:$file" } # func_cl_dashl library # Do a library search-path lookup for cl func_cl_dashl () { lib=$1 found=no save_IFS=$IFS IFS=';' for dir in $lib_path $LIB do IFS=$save_IFS if $shared && test -f "$dir/$lib.dll.lib"; then found=yes lib=$dir/$lib.dll.lib break fi if test -f "$dir/$lib.lib"; then found=yes lib=$dir/$lib.lib break fi if test -f "$dir/lib$lib.a"; then found=yes lib=$dir/lib$lib.a break fi done IFS=$save_IFS if test "$found" != yes; then lib=$lib.lib fi } # func_cl_wrapper cl arg... # Adjust compile command to suit cl func_cl_wrapper () { # Assume a capable shell lib_path= shared=: linker_opts= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as 'compile cc -o foo foo.c'. eat=1 case $2 in *.o | *.lo | *.[oO][bB][jJ]) func_file_conv "$2" set x "$@" -Fo"$file" shift ;; *) func_file_conv "$2" set x "$@" -Fe"$file" shift ;; esac ;; -I) eat=1 func_file_conv "$2" mingw set x "$@" -I"$file" shift ;; -I*) func_file_conv "${1#-I}" mingw set x "$@" -I"$file" shift ;; -l) eat=1 func_cl_dashl "$2" set x "$@" "$lib" shift ;; -l*) func_cl_dashl "${1#-l}" set x "$@" "$lib" shift ;; -L) eat=1 func_cl_dashL "$2" ;; -L*) func_cl_dashL "${1#-L}" ;; -static) shared=false ;; -Wl,*) arg=${1#-Wl,} save_ifs="$IFS"; IFS=',' for flag in $arg; do IFS="$save_ifs" linker_opts="$linker_opts $flag" done IFS="$save_ifs" ;; -Xlinker) eat=1 linker_opts="$linker_opts $2" ;; -*) set x "$@" "$1" shift ;; *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) func_file_conv "$1" set x "$@" -Tp"$file" shift ;; *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) func_file_conv "$1" mingw set x "$@" "$file" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -n "$linker_opts"; then linker_opts="-link$linker_opts" fi exec "$@" $linker_opts exit 1 } eat= case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: compile [--help] [--version] PROGRAM [ARGS] Wrapper for compilers which do not understand '-c -o'. Remove '-o dest.o' from ARGS, run PROGRAM with the remaining arguments, and rename the output as expected. If you are trying to build a whole package this is not the right script to run: please start by reading the file 'INSTALL'. Report bugs to . GNU Automake home page: . General help using GNU software: . EOF exit $? ;; -v | --v*) echo "compile (GNU Automake) $scriptversion" exit $? ;; cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \ clang-cl | *[/\\]clang-cl | clang-cl.exe | *[/\\]clang-cl.exe | \ icl | *[/\\]icl | icl.exe | *[/\\]icl.exe ) func_cl_wrapper "$@" # Doesn't return... ;; esac ofile= cfile= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as 'compile cc -o foo foo.c'. # So we strip '-o arg' only if arg is an object. eat=1 case $2 in *.o | *.obj) ofile=$2 ;; *) set x "$@" -o "$2" shift ;; esac ;; *.c) cfile=$1 set x "$@" "$1" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -z "$ofile" || test -z "$cfile"; then # If no '-o' option was seen then we might have been invoked from a # pattern rule where we don't need one. That is ok -- this is a # normal compilation that the losing compiler can handle. If no # '.c' file was seen then we are probably linking. That is also # ok. exec "$@" fi # Name of file we expect compiler to create. cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` # Create the lock directory. # Note: use '[/\\:.-]' here to ensure that we don't use the same name # that we are using for the .o file. Also, base the name on the expected # object file name, since that is what matters with a parallel build. lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d while true; do if mkdir "$lockdir" >/dev/null 2>&1; then break fi sleep 1 done # FIXME: race condition here if user kills between mkdir and trap. trap "rmdir '$lockdir'; exit 1" 1 2 15 # Run the compile. "$@" ret=$? if test -f "$cofile"; then test "$cofile" = "$ofile" || mv "$cofile" "$ofile" elif test -f "${cofile}bj"; then test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" fi rmdir "$lockdir" exit $ret # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'before-save-hook 'time-stamp nil t) # time-stamp-start: "scriptversion=" # time-stamp-format: "%Y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: libsodium-1.0.22-RELEASE/build-aux/config.guess000077500000000000000000001430671516601152600210710ustar00rootroot00000000000000#! /bin/sh # Attempt to guess a canonical system name. # Copyright 1992-2024 Free Software Foundation, Inc. # shellcheck disable=SC2006,SC2268 # see below for rationale timestamp='2024-07-27' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that # program. This Exception is an additional permission under section 7 # of the GNU General Public License, version 3 ("GPLv3"). # # Originally written by Per Bothner; maintained since 2000 by Ben Elliston. # # You can get the latest version of this script from: # https://git.savannah.gnu.org/cgit/config.git/plain/config.guess # # Please send patches to . # The "shellcheck disable" line above the timestamp inhibits complaints # about features and limitations of the classic Bourne shell that were # superseded or lifted in POSIX. However, this script identifies a wide # variety of pre-POSIX systems that do not have POSIX shells at all, and # even some reasonably current systems (Solaris 10 as case-in-point) still # have a pre-POSIX /bin/sh. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system '$me' is run on. Options: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright 1992-2024 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try '$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi # Just in case it came from the environment. GUESS= # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. # Historically, 'CC_FOR_BUILD' used to be named 'HOST_CC'. We still # use 'HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. tmp= # shellcheck disable=SC2172 trap 'test -z "$tmp" || rm -fr "$tmp"' 0 1 2 13 15 set_cc_for_build() { # prevent multiple calls if $tmp is already set test "$tmp" && return 0 : "${TMPDIR=/tmp}" # shellcheck disable=SC2039,SC3028 { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir "$tmp" 2>/dev/null) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir "$tmp" 2>/dev/null) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } dummy=$tmp/dummy case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in ,,) echo "int x;" > "$dummy.c" for driver in cc gcc c17 c99 c89 ; do if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then CC_FOR_BUILD=$driver break fi done if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac } # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if test -f /.attbin/uname ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown case $UNAME_SYSTEM in Linux|GNU|GNU/*) LIBC=unknown set_cc_for_build cat <<-EOF > "$dummy.c" #if defined(__ANDROID__) LIBC=android #else #include #if defined(__UCLIBC__) LIBC=uclibc #elif defined(__dietlibc__) LIBC=dietlibc #elif defined(__GLIBC__) LIBC=gnu #elif defined(__LLVM_LIBC__) LIBC=llvm #else #include /* First heuristic to detect musl libc. */ #ifdef __DEFINED_va_list LIBC=musl #endif #endif #endif EOF cc_set_libc=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'` eval "$cc_set_libc" # Second heuristic to detect musl libc. if [ "$LIBC" = unknown ] && command -v ldd >/dev/null && ldd --version 2>&1 | grep -q ^musl; then LIBC=musl fi # If the system lacks a compiler, then just pick glibc. # We could probably try harder. if [ "$LIBC" = unknown ]; then LIBC=gnu fi ;; esac # Note: order is significant - the case branches are not exclusive. case $UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ /sbin/sysctl -n hw.machine_arch 2>/dev/null || \ /usr/sbin/sysctl -n hw.machine_arch 2>/dev/null || \ echo unknown)` case $UNAME_MACHINE_ARCH in aarch64eb) machine=aarch64_be-unknown ;; armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; sh5el) machine=sh5le-unknown ;; earmv*) arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'` endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'` machine=${arch}${endian}-unknown ;; *) machine=$UNAME_MACHINE_ARCH-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently (or will in the future) and ABI. case $UNAME_MACHINE_ARCH in earm*) os=netbsdelf ;; arm*|i386|m68k|ns32k|sh3*|sparc|vax) set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ELF__ then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # Determine ABI tags. case $UNAME_MACHINE_ARCH in earm*) expr='s/^earmv[0-9]/-eabi/;s/eb$//' abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"` ;; esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. case $UNAME_VERSION in Debian*) release='-gnu' ;; *) release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. GUESS=$machine-${os}${release}${abi-} ;; *:Bitrig:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` GUESS=$UNAME_MACHINE_ARCH-unknown-bitrig$UNAME_RELEASE ;; *:OpenBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` GUESS=$UNAME_MACHINE_ARCH-unknown-openbsd$UNAME_RELEASE ;; *:SecBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/SecBSD.//'` GUESS=$UNAME_MACHINE_ARCH-unknown-secbsd$UNAME_RELEASE ;; *:LibertyBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` GUESS=$UNAME_MACHINE_ARCH-unknown-libertybsd$UNAME_RELEASE ;; *:MidnightBSD:*:*) GUESS=$UNAME_MACHINE-unknown-midnightbsd$UNAME_RELEASE ;; *:ekkoBSD:*:*) GUESS=$UNAME_MACHINE-unknown-ekkobsd$UNAME_RELEASE ;; *:SolidBSD:*:*) GUESS=$UNAME_MACHINE-unknown-solidbsd$UNAME_RELEASE ;; *:OS108:*:*) GUESS=$UNAME_MACHINE-unknown-os108_$UNAME_RELEASE ;; macppc:MirBSD:*:*) GUESS=powerpc-unknown-mirbsd$UNAME_RELEASE ;; *:MirBSD:*:*) GUESS=$UNAME_MACHINE-unknown-mirbsd$UNAME_RELEASE ;; *:Sortix:*:*) GUESS=$UNAME_MACHINE-unknown-sortix ;; *:Twizzler:*:*) GUESS=$UNAME_MACHINE-unknown-twizzler ;; *:Redox:*:*) GUESS=$UNAME_MACHINE-unknown-redox ;; mips:OSF1:*.*) GUESS=mips-dec-osf1 ;; alpha:OSF1:*:*) # Reset EXIT trap before exiting to avoid spurious non-zero exit code. trap '' 0 case $UNAME_RELEASE in *4.0) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ;; *5.*) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ;; esac # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU # types through head -n 1, so we only detect the type of CPU 0. ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case $ALPHA_CPU_TYPE in "EV4 (21064)") UNAME_MACHINE=alpha ;; "EV4.5 (21064)") UNAME_MACHINE=alpha ;; "LCA4 (21066/21068)") UNAME_MACHINE=alpha ;; "EV5 (21164)") UNAME_MACHINE=alphaev5 ;; "EV5.6 (21164A)") UNAME_MACHINE=alphaev56 ;; "EV5.6 (21164PC)") UNAME_MACHINE=alphapca56 ;; "EV5.7 (21164PC)") UNAME_MACHINE=alphapca57 ;; "EV6 (21264)") UNAME_MACHINE=alphaev6 ;; "EV6.7 (21264A)") UNAME_MACHINE=alphaev67 ;; "EV6.8CB (21264C)") UNAME_MACHINE=alphaev68 ;; "EV6.8AL (21264B)") UNAME_MACHINE=alphaev68 ;; "EV6.8CX (21264D)") UNAME_MACHINE=alphaev68 ;; "EV6.9A (21264/EV69A)") UNAME_MACHINE=alphaev69 ;; "EV7 (21364)") UNAME_MACHINE=alphaev7 ;; "EV7.9 (21364A)") UNAME_MACHINE=alphaev79 ;; esac # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. OSF_REL=`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` GUESS=$UNAME_MACHINE-dec-osf$OSF_REL ;; Amiga*:UNIX_System_V:4.0:*) GUESS=m68k-unknown-sysv4 ;; *:[Aa]miga[Oo][Ss]:*:*) GUESS=$UNAME_MACHINE-unknown-amigaos ;; *:[Mm]orph[Oo][Ss]:*:*) GUESS=$UNAME_MACHINE-unknown-morphos ;; *:OS/390:*:*) GUESS=i370-ibm-openedition ;; *:z/VM:*:*) GUESS=s390-ibm-zvmoe ;; *:OS400:*:*) GUESS=powerpc-ibm-os400 ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) GUESS=arm-acorn-riscix$UNAME_RELEASE ;; arm*:riscos:*:*|arm*:RISCOS:*:*) GUESS=arm-unknown-riscos ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) GUESS=hppa1.1-hitachi-hiuxmpp ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. case `(/bin/universe) 2>/dev/null` in att) GUESS=pyramid-pyramid-sysv3 ;; *) GUESS=pyramid-pyramid-bsd ;; esac ;; NILE*:*:*:dcosx) GUESS=pyramid-pyramid-svr4 ;; DRS?6000:unix:4.0:6*) GUESS=sparc-icl-nx6 ;; DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in sparc) GUESS=sparc-icl-nx7 ;; esac ;; s390x:SunOS:*:*) SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'` GUESS=$UNAME_MACHINE-ibm-solaris2$SUN_REL ;; sun4H:SunOS:5.*:*) SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'` GUESS=sparc-hal-solaris2$SUN_REL ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'` GUESS=sparc-sun-solaris2$SUN_REL ;; i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) GUESS=i386-pc-auroraux$UNAME_RELEASE ;; i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) set_cc_for_build SUN_ARCH=i386 # If there is a compiler, see if it is configured for 64-bit objects. # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. # This test works for both compilers. if test "$CC_FOR_BUILD" != no_compiler_found; then if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS="" $CC_FOR_BUILD -m64 -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then SUN_ARCH=x86_64 fi fi SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'` GUESS=$SUN_ARCH-pc-solaris2$SUN_REL ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'` GUESS=sparc-sun-solaris3$SUN_REL ;; sun4*:SunOS:*:*) case `/usr/bin/arch -k` in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like '4.1.3-JL'. SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/-/_/'` GUESS=sparc-sun-sunos$SUN_REL ;; sun3*:SunOS:*:*) GUESS=m68k-sun-sunos$UNAME_RELEASE ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3 case `/bin/arch` in sun3) GUESS=m68k-sun-sunos$UNAME_RELEASE ;; sun4) GUESS=sparc-sun-sunos$UNAME_RELEASE ;; esac ;; aushp:SunOS:*:*) GUESS=sparc-auspex-sunos$UNAME_RELEASE ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) GUESS=m68k-atari-mint$UNAME_RELEASE ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) GUESS=m68k-atari-mint$UNAME_RELEASE ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) GUESS=m68k-atari-mint$UNAME_RELEASE ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) GUESS=m68k-milan-mint$UNAME_RELEASE ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) GUESS=m68k-hades-mint$UNAME_RELEASE ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) GUESS=m68k-unknown-mint$UNAME_RELEASE ;; m68k:machten:*:*) GUESS=m68k-apple-machten$UNAME_RELEASE ;; powerpc:machten:*:*) GUESS=powerpc-apple-machten$UNAME_RELEASE ;; RISC*:Mach:*:*) GUESS=mips-dec-mach_bsd4.3 ;; RISC*:ULTRIX:*:*) GUESS=mips-dec-ultrix$UNAME_RELEASE ;; VAX*:ULTRIX*:*:*) GUESS=vax-dec-ultrix$UNAME_RELEASE ;; 2020:CLIX:*:* | 2430:CLIX:*:*) GUESS=clipper-intergraph-clix$UNAME_RELEASE ;; mips:*:*:UMIPS | mips:*:*:RISCos) set_cc_for_build sed 's/^ //' << EOF > "$dummy.c" #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD -o "$dummy" "$dummy.c" && dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` && SYSTEM_NAME=`"$dummy" "$dummyarg"` && { echo "$SYSTEM_NAME"; exit; } GUESS=mips-mips-riscos$UNAME_RELEASE ;; Motorola:PowerMAX_OS:*:*) GUESS=powerpc-motorola-powermax ;; Motorola:*:4.3:PL8-*) GUESS=powerpc-harris-powermax ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) GUESS=powerpc-harris-powermax ;; Night_Hawk:Power_UNIX:*:*) GUESS=powerpc-harris-powerunix ;; m88k:CX/UX:7*:*) GUESS=m88k-harris-cxux7 ;; m88k:*:4*:R4*) GUESS=m88k-motorola-sysv4 ;; m88k:*:3*:R3*) GUESS=m88k-motorola-sysv3 ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if test "$UNAME_PROCESSOR" = mc88100 || test "$UNAME_PROCESSOR" = mc88110 then if test "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx || \ test "$TARGET_BINARY_INTERFACE"x = x then GUESS=m88k-dg-dgux$UNAME_RELEASE else GUESS=m88k-dg-dguxbcs$UNAME_RELEASE fi else GUESS=i586-dg-dgux$UNAME_RELEASE fi ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) GUESS=m88k-dolphin-sysv3 ;; M88*:*:R3*:*) # Delta 88k system running SVR3 GUESS=m88k-motorola-sysv3 ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) GUESS=m88k-tektronix-sysv3 ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) GUESS=m68k-tektronix-bsd ;; *:IRIX*:*:*) IRIX_REL=`echo "$UNAME_RELEASE" | sed -e 's/-/_/g'` GUESS=mips-sgi-irix$IRIX_REL ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. GUESS=romp-ibm-aix # uname -m gives an 8 hex-code CPU id ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) GUESS=i386-ibm-aix ;; ia64:AIX:*:*) if test -x /usr/bin/oslevel ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=$UNAME_VERSION.$UNAME_RELEASE fi GUESS=$UNAME_MACHINE-ibm-aix$IBM_REV ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then set_cc_for_build sed 's/^ //' << EOF > "$dummy.c" #include int main () { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` then GUESS=$SYSTEM_NAME else GUESS=rs6000-ibm-aix3.2.5 fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then GUESS=rs6000-ibm-aix3.2.4 else GUESS=rs6000-ibm-aix3.2 fi ;; *:AIX:*:[4567]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if test -x /usr/bin/lslpp ; then IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | \ awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` else IBM_REV=$UNAME_VERSION.$UNAME_RELEASE fi GUESS=$IBM_ARCH-ibm-aix$IBM_REV ;; *:AIX:*:*) GUESS=rs6000-ibm-aix ;; ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*) GUESS=romp-ibm-bsd4.4 ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and GUESS=romp-ibm-bsd$UNAME_RELEASE # 4.3 with uname added to ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) GUESS=rs6000-bull-bosx ;; DPX/2?00:B.O.S.:*:*) GUESS=m68k-bull-sysv3 ;; 9000/[34]??:4.3bsd:1.*:*) GUESS=m68k-hp-bsd ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) GUESS=m68k-hp-bsd4.4 ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*.[0B]*//'` case $UNAME_MACHINE in 9000/31?) HP_ARCH=m68000 ;; 9000/[34]??) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if test -x /usr/bin/getconf; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case $sc_cpu_version in 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case $sc_kernel_bits in 32) HP_ARCH=hppa2.0n ;; 64) HP_ARCH=hppa2.0w ;; '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 esac ;; esac fi if test "$HP_ARCH" = ""; then set_cc_for_build sed 's/^ //' << EOF > "$dummy.c" #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac if test "$HP_ARCH" = hppa2.0w then set_cc_for_build # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler # generating 64-bit code. GNU and HP use different nomenclature: # # $ CC_FOR_BUILD=cc ./config.guess # => hppa2.0w-hp-hpux11.23 # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess # => hppa64-hp-hpux11.23 if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | grep -q __LP64__ then HP_ARCH=hppa2.0w else HP_ARCH=hppa64 fi fi GUESS=$HP_ARCH-hp-hpux$HPUX_REV ;; ia64:HP-UX:*:*) HPUX_REV=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*.[0B]*//'` GUESS=ia64-hp-hpux$HPUX_REV ;; 3050*:HI-UX:*:*) set_cc_for_build sed 's/^ //' << EOF > "$dummy.c" #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` && { echo "$SYSTEM_NAME"; exit; } GUESS=unknown-hitachi-hiuxwe2 ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*) GUESS=hppa1.1-hp-bsd ;; 9000/8??:4.3bsd:*:*) GUESS=hppa1.0-hp-bsd ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) GUESS=hppa1.0-hp-mpeix ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*) GUESS=hppa1.1-hp-osf ;; hp8??:OSF1:*:*) GUESS=hppa1.0-hp-osf ;; i*86:OSF1:*:*) if test -x /usr/sbin/sysversion ; then GUESS=$UNAME_MACHINE-unknown-osf1mk else GUESS=$UNAME_MACHINE-unknown-osf1 fi ;; parisc*:Lites*:*:*) GUESS=hppa1.1-hp-lites ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) GUESS=c1-convex-bsd ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) GUESS=c34-convex-bsd ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) GUESS=c38-convex-bsd ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) GUESS=c4-convex-bsd ;; CRAY*Y-MP:*:*:*) CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'` GUESS=ymp-cray-unicos$CRAY_REL ;; CRAY*[A-Z]90:*:*:*) echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit ;; CRAY*TS:*:*:*) CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'` GUESS=t90-cray-unicos$CRAY_REL ;; CRAY*T3E:*:*:*) CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'` GUESS=alphaev5-cray-unicosmk$CRAY_REL ;; CRAY*SV1:*:*:*) CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'` GUESS=sv1-cray-unicos$CRAY_REL ;; *:UNICOS/mp:*:*) CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'` GUESS=craynv-cray-unicosmp$CRAY_REL ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'` GUESS=${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL} ;; 5000:UNIX_System_V:4.*:*) FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` GUESS=sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL} ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) GUESS=$UNAME_MACHINE-pc-bsdi$UNAME_RELEASE ;; sparc*:BSD/OS:*:*) GUESS=sparc-unknown-bsdi$UNAME_RELEASE ;; *:BSD/OS:*:*) GUESS=$UNAME_MACHINE-unknown-bsdi$UNAME_RELEASE ;; arm:FreeBSD:*:*) UNAME_PROCESSOR=`uname -p` set_cc_for_build if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_PCS_VFP then FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'` GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL-gnueabi else FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'` GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL-gnueabihf fi ;; *:FreeBSD:*:*) UNAME_PROCESSOR=`uname -p` case $UNAME_PROCESSOR in amd64) UNAME_PROCESSOR=x86_64 ;; i386) UNAME_PROCESSOR=i586 ;; esac FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'` GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL ;; i*:CYGWIN*:*) GUESS=$UNAME_MACHINE-pc-cygwin ;; *:MINGW64*:*) GUESS=$UNAME_MACHINE-pc-mingw64 ;; *:MINGW*:*) GUESS=$UNAME_MACHINE-pc-mingw32 ;; *:MSYS*:*) GUESS=$UNAME_MACHINE-pc-msys ;; i*:PW*:*) GUESS=$UNAME_MACHINE-pc-pw32 ;; *:SerenityOS:*:*) GUESS=$UNAME_MACHINE-pc-serenity ;; *:Interix*:*) case $UNAME_MACHINE in x86) GUESS=i586-pc-interix$UNAME_RELEASE ;; authenticamd | genuineintel | EM64T) GUESS=x86_64-unknown-interix$UNAME_RELEASE ;; IA64) GUESS=ia64-unknown-interix$UNAME_RELEASE ;; esac ;; i*:UWIN*:*) GUESS=$UNAME_MACHINE-pc-uwin ;; amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) GUESS=x86_64-pc-cygwin ;; prep*:SunOS:5.*:*) SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'` GUESS=powerpcle-unknown-solaris2$SUN_REL ;; *:GNU:*:*) # the GNU system GNU_ARCH=`echo "$UNAME_MACHINE" | sed -e 's,[-/].*$,,'` GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's,/.*$,,'` GUESS=$GNU_ARCH-unknown-$LIBC$GNU_REL ;; *:GNU/*:*:*) # other systems with GNU libc and userland GNU_SYS=`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"` GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'` GUESS=$UNAME_MACHINE-unknown-$GNU_SYS$GNU_REL-$LIBC ;; x86_64:[Mm]anagarm:*:*|i?86:[Mm]anagarm:*:*) GUESS="$UNAME_MACHINE-pc-managarm-mlibc" ;; *:[Mm]anagarm:*:*) GUESS="$UNAME_MACHINE-unknown-managarm-mlibc" ;; *:Minix:*:*) GUESS=$UNAME_MACHINE-unknown-minix ;; aarch64:Linux:*:*) set_cc_for_build CPU=$UNAME_MACHINE LIBCABI=$LIBC if test "$CC_FOR_BUILD" != no_compiler_found; then ABI=64 sed 's/^ //' << EOF > "$dummy.c" #ifdef __ARM_EABI__ #ifdef __ARM_PCS_VFP ABI=eabihf #else ABI=eabi #endif #endif EOF cc_set_abi=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^ABI' | sed 's, ,,g'` eval "$cc_set_abi" case $ABI in eabi | eabihf) CPU=armv8l; LIBCABI=$LIBC$ABI ;; esac fi GUESS=$CPU-unknown-linux-$LIBCABI ;; aarch64_be:Linux:*:*) UNAME_MACHINE=aarch64_be GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' /proc/cpuinfo 2>/dev/null` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep -q ld.so.1 if test "$?" = 0 ; then LIBC=gnulibc1 ; fi GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; arc:Linux:*:* | arceb:Linux:*:* | arc32:Linux:*:* | arc64:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; arm*:Linux:*:*) set_cc_for_build if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_EABI__ then GUESS=$UNAME_MACHINE-unknown-linux-$LIBC else if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_PCS_VFP then GUESS=$UNAME_MACHINE-unknown-linux-${LIBC}eabi else GUESS=$UNAME_MACHINE-unknown-linux-${LIBC}eabihf fi fi ;; avr32*:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; cris:Linux:*:*) GUESS=$UNAME_MACHINE-axis-linux-$LIBC ;; crisv32:Linux:*:*) GUESS=$UNAME_MACHINE-axis-linux-$LIBC ;; e2k:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; frv:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; hexagon:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; i*86:Linux:*:*) GUESS=$UNAME_MACHINE-pc-linux-$LIBC ;; ia64:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; k1om:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; kvx:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; kvx:cos:*:*) GUESS=$UNAME_MACHINE-unknown-cos ;; kvx:mbr:*:*) GUESS=$UNAME_MACHINE-unknown-mbr ;; loongarch32:Linux:*:* | loongarch64:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; m32r*:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; m68*:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; mips:Linux:*:* | mips64:Linux:*:*) set_cc_for_build IS_GLIBC=0 test x"${LIBC}" = xgnu && IS_GLIBC=1 sed 's/^ //' << EOF > "$dummy.c" #undef CPU #undef mips #undef mipsel #undef mips64 #undef mips64el #if ${IS_GLIBC} && defined(_ABI64) LIBCABI=gnuabi64 #else #if ${IS_GLIBC} && defined(_ABIN32) LIBCABI=gnuabin32 #else LIBCABI=${LIBC} #endif #endif #if ${IS_GLIBC} && defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6 CPU=mipsisa64r6 #else #if ${IS_GLIBC} && !defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6 CPU=mipsisa32r6 #else #if defined(__mips64) CPU=mips64 #else CPU=mips #endif #endif #endif #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) MIPS_ENDIAN=el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) MIPS_ENDIAN= #else MIPS_ENDIAN= #endif #endif EOF cc_set_vars=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU\|^MIPS_ENDIAN\|^LIBCABI'` eval "$cc_set_vars" test "x$CPU" != x && { echo "$CPU${MIPS_ENDIAN}-unknown-linux-$LIBCABI"; exit; } ;; mips64el:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; openrisc*:Linux:*:*) GUESS=or1k-unknown-linux-$LIBC ;; or32:Linux:*:* | or1k*:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; padre:Linux:*:*) GUESS=sparc-unknown-linux-$LIBC ;; parisc64:Linux:*:* | hppa64:Linux:*:*) GUESS=hppa64-unknown-linux-$LIBC ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) GUESS=hppa1.1-unknown-linux-$LIBC ;; PA8*) GUESS=hppa2.0-unknown-linux-$LIBC ;; *) GUESS=hppa-unknown-linux-$LIBC ;; esac ;; ppc64:Linux:*:*) GUESS=powerpc64-unknown-linux-$LIBC ;; ppc:Linux:*:*) GUESS=powerpc-unknown-linux-$LIBC ;; ppc64le:Linux:*:*) GUESS=powerpc64le-unknown-linux-$LIBC ;; ppcle:Linux:*:*) GUESS=powerpcle-unknown-linux-$LIBC ;; riscv32:Linux:*:* | riscv32be:Linux:*:* | riscv64:Linux:*:* | riscv64be:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; s390:Linux:*:* | s390x:Linux:*:*) GUESS=$UNAME_MACHINE-ibm-linux-$LIBC ;; sh64*:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; sh*:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; sparc:Linux:*:* | sparc64:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; tile*:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; vax:Linux:*:*) GUESS=$UNAME_MACHINE-dec-linux-$LIBC ;; x86_64:Linux:*:*) set_cc_for_build CPU=$UNAME_MACHINE LIBCABI=$LIBC if test "$CC_FOR_BUILD" != no_compiler_found; then ABI=64 sed 's/^ //' << EOF > "$dummy.c" #ifdef __i386__ ABI=x86 #else #ifdef __ILP32__ ABI=x32 #endif #endif EOF cc_set_abi=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^ABI' | sed 's, ,,g'` eval "$cc_set_abi" case $ABI in x86) CPU=i686 ;; x32) LIBCABI=${LIBC}x32 ;; esac fi GUESS=$CPU-pc-linux-$LIBCABI ;; xtensa*:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. GUESS=i386-sequent-sysv4 ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. GUESS=$UNAME_MACHINE-pc-sysv4.2uw$UNAME_VERSION ;; i*86:OS/2:*:*) # If we were able to find 'uname', then EMX Unix compatibility # is probably installed. GUESS=$UNAME_MACHINE-pc-os2-emx ;; i*86:XTS-300:*:STOP) GUESS=$UNAME_MACHINE-unknown-stop ;; i*86:atheos:*:*) GUESS=$UNAME_MACHINE-unknown-atheos ;; i*86:syllable:*:*) GUESS=$UNAME_MACHINE-pc-syllable ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) GUESS=i386-unknown-lynxos$UNAME_RELEASE ;; i*86:*DOS:*:*) GUESS=$UNAME_MACHINE-pc-msdosdjgpp ;; i*86:*:4.*:*) UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then GUESS=$UNAME_MACHINE-univel-sysv$UNAME_REL else GUESS=$UNAME_MACHINE-pc-sysv$UNAME_REL fi ;; i*86:*:5:[678]*) # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac GUESS=$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 GUESS=$UNAME_MACHINE-pc-sco$UNAME_REL else GUESS=$UNAME_MACHINE-pc-sysv32 fi ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i586. # Note: whatever this is, it MUST be the same as what config.sub # prints for the "djgpp" host, or else GDB configure will decide that # this is a cross-build. GUESS=i586-pc-msdosdjgpp ;; Intel:Mach:3*:*) GUESS=i386-pc-mach3 ;; paragon:*:*:*) GUESS=i860-intel-osf1 ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then GUESS=i860-stardent-sysv$UNAME_RELEASE # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. GUESS=i860-unknown-sysv$UNAME_RELEASE # Unknown i860-SVR4 fi ;; mini*:CTIX:SYS*5:*) # "miniframe" GUESS=m68010-convergent-sysv ;; mc68k:UNIX:SYSTEM5:3.51m) GUESS=m68k-convergent-sysv ;; M680?0:D-NIX:5.3:*) GUESS=m68k-diab-dnix ;; M68*:*:R3V[5678]*:*) test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4; exit; } ;; NCR*:*:4.2:* | MPRAS*:*:4.2:*) OS_REL='.3' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) GUESS=m68k-unknown-lynxos$UNAME_RELEASE ;; mc68030:UNIX_System_V:4.*:*) GUESS=m68k-atari-sysv4 ;; TSUNAMI:LynxOS:2.*:*) GUESS=sparc-unknown-lynxos$UNAME_RELEASE ;; rs6000:LynxOS:2.*:*) GUESS=rs6000-unknown-lynxos$UNAME_RELEASE ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) GUESS=powerpc-unknown-lynxos$UNAME_RELEASE ;; SM[BE]S:UNIX_SV:*:*) GUESS=mips-dde-sysv$UNAME_RELEASE ;; RM*:ReliantUNIX-*:*:*) GUESS=mips-sni-sysv4 ;; RM*:SINIX-*:*:*) GUESS=mips-sni-sysv4 ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` GUESS=$UNAME_MACHINE-sni-sysv4 else GUESS=ns32k-sni-sysv fi ;; PENTIUM:*:4.0*:*) # Unisys 'ClearPath HMP IX 4000' SVR4/MP effort # says GUESS=i586-unisys-sysv4 ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm GUESS=hppa1.1-stratus-sysv4 ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. GUESS=i860-stratus-sysv4 ;; i*86:VOS:*:*) # From Paul.Green@stratus.com. GUESS=$UNAME_MACHINE-stratus-vos ;; *:VOS:*:*) # From Paul.Green@stratus.com. GUESS=hppa1.1-stratus-vos ;; mc68*:A/UX:*:*) GUESS=m68k-apple-aux$UNAME_RELEASE ;; news*:NEWS-OS:6*:*) GUESS=mips-sony-newsos6 ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if test -d /usr/nec; then GUESS=mips-nec-sysv$UNAME_RELEASE else GUESS=mips-unknown-sysv$UNAME_RELEASE fi ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. GUESS=powerpc-be-beos ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. GUESS=powerpc-apple-beos ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. GUESS=i586-pc-beos ;; BePC:Haiku:*:*) # Haiku running on Intel PC compatible. GUESS=i586-pc-haiku ;; ppc:Haiku:*:*) # Haiku running on Apple PowerPC GUESS=powerpc-apple-haiku ;; *:Haiku:*:*) # Haiku modern gcc (not bound by BeOS compat) GUESS=$UNAME_MACHINE-unknown-haiku ;; SX-4:SUPER-UX:*:*) GUESS=sx4-nec-superux$UNAME_RELEASE ;; SX-5:SUPER-UX:*:*) GUESS=sx5-nec-superux$UNAME_RELEASE ;; SX-6:SUPER-UX:*:*) GUESS=sx6-nec-superux$UNAME_RELEASE ;; SX-7:SUPER-UX:*:*) GUESS=sx7-nec-superux$UNAME_RELEASE ;; SX-8:SUPER-UX:*:*) GUESS=sx8-nec-superux$UNAME_RELEASE ;; SX-8R:SUPER-UX:*:*) GUESS=sx8r-nec-superux$UNAME_RELEASE ;; SX-ACE:SUPER-UX:*:*) GUESS=sxace-nec-superux$UNAME_RELEASE ;; Power*:Rhapsody:*:*) GUESS=powerpc-apple-rhapsody$UNAME_RELEASE ;; *:Rhapsody:*:*) GUESS=$UNAME_MACHINE-apple-rhapsody$UNAME_RELEASE ;; arm64:Darwin:*:*) GUESS=aarch64-apple-darwin$UNAME_RELEASE ;; *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` case $UNAME_PROCESSOR in unknown) UNAME_PROCESSOR=powerpc ;; esac if command -v xcode-select > /dev/null 2> /dev/null && \ ! xcode-select --print-path > /dev/null 2> /dev/null ; then # Avoid executing cc if there is no toolchain installed as # cc will be a stub that puts up a graphical alert # prompting the user to install developer tools. CC_FOR_BUILD=no_compiler_found else set_cc_for_build fi if test "$CC_FOR_BUILD" != no_compiler_found; then if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then case $UNAME_PROCESSOR in i386) UNAME_PROCESSOR=x86_64 ;; powerpc) UNAME_PROCESSOR=powerpc64 ;; esac fi # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_PPC >/dev/null then UNAME_PROCESSOR=powerpc fi elif test "$UNAME_PROCESSOR" = i386 ; then # uname -m returns i386 or x86_64 UNAME_PROCESSOR=$UNAME_MACHINE fi GUESS=$UNAME_PROCESSOR-apple-darwin$UNAME_RELEASE ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = x86; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi GUESS=$UNAME_PROCESSOR-$UNAME_MACHINE-nto-qnx$UNAME_RELEASE ;; *:QNX:*:4*) GUESS=i386-pc-qnx ;; NEO-*:NONSTOP_KERNEL:*:*) GUESS=neo-tandem-nsk$UNAME_RELEASE ;; NSE-*:NONSTOP_KERNEL:*:*) GUESS=nse-tandem-nsk$UNAME_RELEASE ;; NSR-*:NONSTOP_KERNEL:*:*) GUESS=nsr-tandem-nsk$UNAME_RELEASE ;; NSV-*:NONSTOP_KERNEL:*:*) GUESS=nsv-tandem-nsk$UNAME_RELEASE ;; NSX-*:NONSTOP_KERNEL:*:*) GUESS=nsx-tandem-nsk$UNAME_RELEASE ;; *:NonStop-UX:*:*) GUESS=mips-compaq-nonstopux ;; BS2000:POSIX*:*:*) GUESS=bs2000-siemens-sysv ;; DS/*:UNIX_System_V:*:*) GUESS=$UNAME_MACHINE-$UNAME_SYSTEM-$UNAME_RELEASE ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "${cputype-}" = 386; then UNAME_MACHINE=i386 elif test "x${cputype-}" != x; then UNAME_MACHINE=$cputype fi GUESS=$UNAME_MACHINE-unknown-plan9 ;; *:TOPS-10:*:*) GUESS=pdp10-unknown-tops10 ;; *:TENEX:*:*) GUESS=pdp10-unknown-tenex ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) GUESS=pdp10-dec-tops20 ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) GUESS=pdp10-xkl-tops20 ;; *:TOPS-20:*:*) GUESS=pdp10-unknown-tops20 ;; *:ITS:*:*) GUESS=pdp10-unknown-its ;; SEI:*:*:SEIUX) GUESS=mips-sei-seiux$UNAME_RELEASE ;; *:DragonFly:*:*) DRAGONFLY_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'` GUESS=$UNAME_MACHINE-unknown-dragonfly$DRAGONFLY_REL ;; *:*VMS:*:*) UNAME_MACHINE=`(uname -p) 2>/dev/null` case $UNAME_MACHINE in A*) GUESS=alpha-dec-vms ;; I*) GUESS=ia64-dec-vms ;; V*) GUESS=vax-dec-vms ;; esac ;; *:XENIX:*:SysV) GUESS=i386-pc-xenix ;; i*86:skyos:*:*) SKYOS_REL=`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'` GUESS=$UNAME_MACHINE-pc-skyos$SKYOS_REL ;; i*86:rdos:*:*) GUESS=$UNAME_MACHINE-pc-rdos ;; i*86:Fiwix:*:*) GUESS=$UNAME_MACHINE-pc-fiwix ;; *:AROS:*:*) GUESS=$UNAME_MACHINE-unknown-aros ;; x86_64:VMkernel:*:*) GUESS=$UNAME_MACHINE-unknown-esx ;; amd64:Isilon\ OneFS:*:*) GUESS=x86_64-unknown-onefs ;; *:Unleashed:*:*) GUESS=$UNAME_MACHINE-unknown-unleashed$UNAME_RELEASE ;; *:Ironclad:*:*) GUESS=$UNAME_MACHINE-unknown-ironclad ;; esac # Do we have a guess based on uname results? if test "x$GUESS" != x; then echo "$GUESS" exit fi # No uname command or uname output not recognized. set_cc_for_build cat > "$dummy.c" < #include #endif #if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__) #if defined (vax) || defined (__vax) || defined (__vax__) || defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__) #include #if defined(_SIZE_T_) || defined(SIGLOST) #include #endif #endif #endif int main () { #if defined (sony) #if defined (MIPSEB) /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, I don't know.... */ printf ("mips-sony-bsd\n"); exit (0); #else #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 "4" #else "" #endif ); exit (0); #endif #endif #if defined (NeXT) #if !defined (__ARCHITECTURE__) #define __ARCHITECTURE__ "m68k" #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; if (version < 4) printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); else printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif #if defined (MULTIMAX) || defined (n16) #if defined (UMAXV) printf ("ns32k-encore-sysv\n"); exit (0); #else #if defined (CMU) printf ("ns32k-encore-mach\n"); exit (0); #else printf ("ns32k-encore-bsd\n"); exit (0); #endif #endif #endif #if defined (__386BSD__) printf ("i386-pc-bsd\n"); exit (0); #endif #if defined (sequent) #if defined (i386) printf ("i386-sequent-dynix\n"); exit (0); #endif #if defined (ns32000) printf ("ns32k-sequent-dynix\n"); exit (0); #endif #endif #if defined (_SEQUENT_) struct utsname un; uname(&un); if (strncmp(un.version, "V2", 2) == 0) { printf ("i386-sequent-ptx2\n"); exit (0); } if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ printf ("i386-sequent-ptx1\n"); exit (0); } printf ("i386-sequent-ptx\n"); exit (0); #endif #if defined (vax) #if !defined (ultrix) #include #if defined (BSD) #if BSD == 43 printf ("vax-dec-bsd4.3\n"); exit (0); #else #if BSD == 199006 printf ("vax-dec-bsd4.3reno\n"); exit (0); #else printf ("vax-dec-bsd\n"); exit (0); #endif #endif #else printf ("vax-dec-bsd\n"); exit (0); #endif #else #if defined(_SIZE_T_) || defined(SIGLOST) struct utsname un; uname (&un); printf ("vax-dec-ultrix%s\n", un.release); exit (0); #else printf ("vax-dec-ultrix\n"); exit (0); #endif #endif #endif #if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__) #if defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__) #if defined(_SIZE_T_) || defined(SIGLOST) struct utsname *un; uname (&un); printf ("mips-dec-ultrix%s\n", un.release); exit (0); #else printf ("mips-dec-ultrix\n"); exit (0); #endif #endif #endif #if defined (alliant) && defined (i860) printf ("i860-alliant-bsd\n"); exit (0); #endif exit (1); } EOF $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null && SYSTEM_NAME=`"$dummy"` && { echo "$SYSTEM_NAME"; exit; } # Apollos put the system type in the environment. test -d /usr/apollo && { echo "$ISP-apollo-$SYSTYPE"; exit; } echo "$0: unable to guess system type" >&2 case $UNAME_MACHINE:$UNAME_SYSTEM in mips:Linux | mips64:Linux) # If we got here on MIPS GNU/Linux, output extra information. cat >&2 <&2 <&2 </dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = "$UNAME_MACHINE" UNAME_RELEASE = "$UNAME_RELEASE" UNAME_SYSTEM = "$UNAME_SYSTEM" UNAME_VERSION = "$UNAME_VERSION" EOF fi exit 1 # Local variables: # eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: libsodium-1.0.22-RELEASE/build-aux/config.sub000066400000000000000000001160071516601152600205230ustar00rootroot00000000000000#! /bin/sh # Configuration validation subroutine script. # Copyright 1992-2025 Free Software Foundation, Inc. # shellcheck disable=SC2006,SC2268,SC2162 # see below for rationale timestamp='2025-07-10' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that # program. This Exception is an additional permission under section 7 # of the GNU General Public License, version 3 ("GPLv3"). # Please send patches to . # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # You can get the latest version of this script from: # https://git.savannah.gnu.org/cgit/config.git/plain/config.sub # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. # The "shellcheck disable" line above the timestamp inhibits complaints # about features and limitations of the classic Bourne shell that were # superseded or lifted in POSIX. However, this script identifies a wide # variety of pre-POSIX systems that do not have POSIX shells at all, and # even some reasonably current systems (Solaris 10 as case-in-point) still # have a pre-POSIX /bin/sh. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS Canonicalize a configuration name. Options: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright 1992-2025 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try '$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; *local*) # First pass through any local machine types. echo "$1" exit ;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Split fields of configuration type saved_IFS=$IFS IFS="-" read field1 field2 field3 field4 <&2 exit 1 ;; *-*-*-*) basic_machine=$field1-$field2 basic_os=$field3-$field4 ;; *-*-*) # Ambiguous whether COMPANY is present, or skipped and KERNEL-OS is two # parts maybe_os=$field2-$field3 case $maybe_os in cloudabi*-eabi* \ | kfreebsd*-gnu* \ | knetbsd*-gnu* \ | kopensolaris*-gnu* \ | ironclad-* \ | linux-* \ | managarm-* \ | netbsd*-eabi* \ | netbsd*-gnu* \ | nto-qnx* \ | os2-emx* \ | rtmk-nova* \ | storm-chaos* \ | uclinux-gnu* \ | uclinux-uclibc* \ | windows-* ) basic_machine=$field1 basic_os=$maybe_os ;; android-linux) basic_machine=$field1-unknown basic_os=linux-android ;; *) basic_machine=$field1-$field2 basic_os=$field3 ;; esac ;; *-*) case $field1-$field2 in # Shorthands that happen to contain a single dash convex-c[12] | convex-c3[248]) basic_machine=$field2-convex basic_os= ;; decstation-3100) basic_machine=mips-dec basic_os= ;; *-*) # Second component is usually, but not always the OS case $field2 in # Do not treat sunos as a manufacturer sun*os*) basic_machine=$field1 basic_os=$field2 ;; # Manufacturers 3100* \ | 32* \ | 3300* \ | 3600* \ | 7300* \ | acorn \ | altos* \ | apollo \ | apple \ | atari \ | att* \ | axis \ | be \ | bull \ | cbm \ | ccur \ | cisco \ | commodore \ | convergent* \ | convex* \ | cray \ | crds \ | dec* \ | delta* \ | dg \ | digital \ | dolphin \ | encore* \ | gould \ | harris \ | highlevel \ | hitachi* \ | hp \ | ibm* \ | intergraph \ | isi* \ | knuth \ | masscomp \ | microblaze* \ | mips* \ | motorola* \ | ncr* \ | news \ | next \ | ns \ | oki \ | omron* \ | pc533* \ | rebel \ | rom68k \ | rombug \ | semi \ | sequent* \ | sgi* \ | siemens \ | sim \ | sni \ | sony* \ | stratus \ | sun \ | sun[234]* \ | tektronix \ | tti* \ | ultra \ | unicom* \ | wec \ | winbond \ | wrs) basic_machine=$field1-$field2 basic_os= ;; tock* | zephyr*) basic_machine=$field1-unknown basic_os=$field2 ;; *) basic_machine=$field1 basic_os=$field2 ;; esac ;; esac ;; *) # Convert single-component short-hands not valid as part of # multi-component configurations. case $field1 in 386bsd) basic_machine=i386-pc basic_os=bsd ;; a29khif) basic_machine=a29k-amd basic_os=udi ;; adobe68k) basic_machine=m68010-adobe basic_os=scout ;; alliant) basic_machine=fx80-alliant basic_os= ;; altos | altos3068) basic_machine=m68k-altos basic_os= ;; am29k) basic_machine=a29k-none basic_os=bsd ;; amdahl) basic_machine=580-amdahl basic_os=sysv ;; amiga) basic_machine=m68k-unknown basic_os= ;; amigaos | amigados) basic_machine=m68k-unknown basic_os=amigaos ;; amigaunix | amix) basic_machine=m68k-unknown basic_os=sysv4 ;; apollo68) basic_machine=m68k-apollo basic_os=sysv ;; apollo68bsd) basic_machine=m68k-apollo basic_os=bsd ;; aros) basic_machine=i386-pc basic_os=aros ;; aux) basic_machine=m68k-apple basic_os=aux ;; balance) basic_machine=ns32k-sequent basic_os=dynix ;; blackfin) basic_machine=bfin-unknown basic_os=linux ;; cegcc) basic_machine=arm-unknown basic_os=cegcc ;; cray) basic_machine=j90-cray basic_os=unicos ;; crds | unos) basic_machine=m68k-crds basic_os= ;; da30) basic_machine=m68k-da30 basic_os= ;; decstation | pmax | pmin | dec3100 | decstatn) basic_machine=mips-dec basic_os= ;; delta88) basic_machine=m88k-motorola basic_os=sysv3 ;; dicos) basic_machine=i686-pc basic_os=dicos ;; djgpp) basic_machine=i586-pc basic_os=msdosdjgpp ;; ebmon29k) basic_machine=a29k-amd basic_os=ebmon ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson basic_os=ose ;; gmicro) basic_machine=tron-gmicro basic_os=sysv ;; go32) basic_machine=i386-pc basic_os=go32 ;; h8300hms) basic_machine=h8300-hitachi basic_os=hms ;; h8300xray) basic_machine=h8300-hitachi basic_os=xray ;; h8500hms) basic_machine=h8500-hitachi basic_os=hms ;; harris) basic_machine=m88k-harris basic_os=sysv3 ;; hp300 | hp300hpux) basic_machine=m68k-hp basic_os=hpux ;; hp300bsd) basic_machine=m68k-hp basic_os=bsd ;; hppaosf) basic_machine=hppa1.1-hp basic_os=osf ;; hppro) basic_machine=hppa1.1-hp basic_os=proelf ;; i386mach) basic_machine=i386-mach basic_os=mach ;; isi68 | isi) basic_machine=m68k-isi basic_os=sysv ;; m68knommu) basic_machine=m68k-unknown basic_os=linux ;; magnum | m3230) basic_machine=mips-mips basic_os=sysv ;; merlin) basic_machine=ns32k-utek basic_os=sysv ;; mingw64) basic_machine=x86_64-pc basic_os=mingw64 ;; mingw32) basic_machine=i686-pc basic_os=mingw32 ;; mingw32ce) basic_machine=arm-unknown basic_os=mingw32ce ;; monitor) basic_machine=m68k-rom68k basic_os=coff ;; morphos) basic_machine=powerpc-unknown basic_os=morphos ;; moxiebox) basic_machine=moxie-unknown basic_os=moxiebox ;; msdos) basic_machine=i386-pc basic_os=msdos ;; msys) basic_machine=i686-pc basic_os=msys ;; mvs) basic_machine=i370-ibm basic_os=mvs ;; nacl) basic_machine=le32-unknown basic_os=nacl ;; ncr3000) basic_machine=i486-ncr basic_os=sysv4 ;; netbsd386) basic_machine=i386-pc basic_os=netbsd ;; netwinder) basic_machine=armv4l-rebel basic_os=linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony basic_os=newsos ;; news1000) basic_machine=m68030-sony basic_os=newsos ;; necv70) basic_machine=v70-nec basic_os=sysv ;; nh3000) basic_machine=m68k-harris basic_os=cxux ;; nh[45]000) basic_machine=m88k-harris basic_os=cxux ;; nindy960) basic_machine=i960-intel basic_os=nindy ;; mon960) basic_machine=i960-intel basic_os=mon960 ;; nonstopux) basic_machine=mips-compaq basic_os=nonstopux ;; os400) basic_machine=powerpc-ibm basic_os=os400 ;; OSE68000 | ose68000) basic_machine=m68000-ericsson basic_os=ose ;; os68k) basic_machine=m68k-none basic_os=os68k ;; paragon) basic_machine=i860-intel basic_os=osf ;; parisc) basic_machine=hppa-unknown basic_os=linux ;; psp) basic_machine=mipsallegrexel-sony basic_os=psp ;; pw32) basic_machine=i586-unknown basic_os=pw32 ;; rdos | rdos64) basic_machine=x86_64-pc basic_os=rdos ;; rdos32) basic_machine=i386-pc basic_os=rdos ;; rom68k) basic_machine=m68k-rom68k basic_os=coff ;; sa29200) basic_machine=a29k-amd basic_os=udi ;; sei) basic_machine=mips-sei basic_os=seiux ;; sequent) basic_machine=i386-sequent basic_os= ;; sps7) basic_machine=m68k-bull basic_os=sysv2 ;; st2000) basic_machine=m68k-tandem basic_os= ;; stratus) basic_machine=i860-stratus basic_os=sysv4 ;; sun2) basic_machine=m68000-sun basic_os= ;; sun2os3) basic_machine=m68000-sun basic_os=sunos3 ;; sun2os4) basic_machine=m68000-sun basic_os=sunos4 ;; sun3) basic_machine=m68k-sun basic_os= ;; sun3os3) basic_machine=m68k-sun basic_os=sunos3 ;; sun3os4) basic_machine=m68k-sun basic_os=sunos4 ;; sun4) basic_machine=sparc-sun basic_os= ;; sun4os3) basic_machine=sparc-sun basic_os=sunos3 ;; sun4os4) basic_machine=sparc-sun basic_os=sunos4 ;; sun4sol2) basic_machine=sparc-sun basic_os=solaris2 ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun basic_os= ;; sv1) basic_machine=sv1-cray basic_os=unicos ;; symmetry) basic_machine=i386-sequent basic_os=dynix ;; t3e) basic_machine=alphaev5-cray basic_os=unicos ;; t90) basic_machine=t90-cray basic_os=unicos ;; toad1) basic_machine=pdp10-xkl basic_os=tops20 ;; tpf) basic_machine=s390x-ibm basic_os=tpf ;; udi29k) basic_machine=a29k-amd basic_os=udi ;; ultra3) basic_machine=a29k-nyu basic_os=sym1 ;; v810 | necv810) basic_machine=v810-nec basic_os=none ;; vaxv) basic_machine=vax-dec basic_os=sysv ;; vms) basic_machine=vax-dec basic_os=vms ;; vsta) basic_machine=i386-pc basic_os=vsta ;; vxworks960) basic_machine=i960-wrs basic_os=vxworks ;; vxworks68) basic_machine=m68k-wrs basic_os=vxworks ;; vxworks29k) basic_machine=a29k-wrs basic_os=vxworks ;; xbox) basic_machine=i686-pc basic_os=mingw32 ;; ymp) basic_machine=ymp-cray basic_os=unicos ;; *) basic_machine=$1 basic_os= ;; esac ;; esac # Decode 1-component or ad-hoc basic machines case $basic_machine in # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) cpu=hppa1.1 vendor=winbond ;; op50n) cpu=hppa1.1 vendor=oki ;; op60c) cpu=hppa1.1 vendor=oki ;; ibm*) cpu=i370 vendor=ibm ;; orion105) cpu=clipper vendor=highlevel ;; mac | mpw | mac-mpw) cpu=m68k vendor=apple ;; pmac | pmac-mpw) cpu=powerpc vendor=apple ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) cpu=m68000 vendor=att ;; 3b*) cpu=we32k vendor=att ;; bluegene*) cpu=powerpc vendor=ibm basic_os=cnk ;; decsystem10* | dec10*) cpu=pdp10 vendor=dec basic_os=tops10 ;; decsystem20* | dec20*) cpu=pdp10 vendor=dec basic_os=tops20 ;; delta | 3300 | delta-motorola | 3300-motorola | motorola-delta | motorola-3300) cpu=m68k vendor=motorola ;; # This used to be dpx2*, but that gets the RS6000-based # DPX/20 and the x86-based DPX/2-100 wrong. See # https://oldskool.silicium.org/stations/bull_dpx20.htm # https://www.feb-patrimoine.com/english/bull_dpx2.htm # https://www.feb-patrimoine.com/english/unix_and_bull.htm dpx2 | dpx2[23]00 | dpx2[23]xx) cpu=m68k vendor=bull ;; dpx2100 | dpx21xx) cpu=i386 vendor=bull ;; dpx20) cpu=rs6000 vendor=bull ;; encore | umax | mmax) cpu=ns32k vendor=encore ;; elxsi) cpu=elxsi vendor=elxsi basic_os=${basic_os:-bsd} ;; fx2800) cpu=i860 vendor=alliant ;; genix) cpu=ns32k vendor=ns ;; h3050r* | hiux*) cpu=hppa1.1 vendor=hitachi basic_os=hiuxwe2 ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) cpu=hppa1.0 vendor=hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) cpu=m68000 vendor=hp ;; hp9k3[2-9][0-9]) cpu=m68k vendor=hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) cpu=hppa1.0 vendor=hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) cpu=hppa1.1 vendor=hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp cpu=hppa1.1 vendor=hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp cpu=hppa1.1 vendor=hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) cpu=hppa1.1 vendor=hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) cpu=hppa1.0 vendor=hp ;; i*86v32) cpu=`echo "$1" | sed -e 's/86.*/86/'` vendor=pc basic_os=sysv32 ;; i*86v4*) cpu=`echo "$1" | sed -e 's/86.*/86/'` vendor=pc basic_os=sysv4 ;; i*86v) cpu=`echo "$1" | sed -e 's/86.*/86/'` vendor=pc basic_os=sysv ;; i*86sol2) cpu=`echo "$1" | sed -e 's/86.*/86/'` vendor=pc basic_os=solaris2 ;; j90 | j90-cray) cpu=j90 vendor=cray basic_os=${basic_os:-unicos} ;; iris | iris4d) cpu=mips vendor=sgi case $basic_os in irix*) ;; *) basic_os=irix4 ;; esac ;; miniframe) cpu=m68000 vendor=convergent ;; *mint | mint[0-9]* | *MiNT | *MiNT[0-9]*) cpu=m68k vendor=atari basic_os=mint ;; news-3600 | risc-news) cpu=mips vendor=sony basic_os=newsos ;; next | m*-next) cpu=m68k vendor=next ;; np1) cpu=np1 vendor=gould ;; op50n-* | op60c-*) cpu=hppa1.1 vendor=oki basic_os=proelf ;; pa-hitachi) cpu=hppa1.1 vendor=hitachi basic_os=hiuxwe2 ;; pbd) cpu=sparc vendor=tti ;; pbb) cpu=m68k vendor=tti ;; pc532) cpu=ns32k vendor=pc532 ;; pn) cpu=pn vendor=gould ;; power) cpu=power vendor=ibm ;; ps2) cpu=i386 vendor=ibm ;; rm[46]00) cpu=mips vendor=siemens ;; rtpc | rtpc-*) cpu=romp vendor=ibm ;; sde) cpu=mipsisa32 vendor=sde basic_os=${basic_os:-elf} ;; simso-wrs) cpu=sparclite vendor=wrs basic_os=vxworks ;; tower | tower-32) cpu=m68k vendor=ncr ;; vpp*|vx|vx-*) cpu=f301 vendor=fujitsu ;; w65) cpu=w65 vendor=wdc ;; w89k-*) cpu=hppa1.1 vendor=winbond basic_os=proelf ;; none) cpu=none vendor=none ;; leon|leon[3-9]) cpu=sparc vendor=$basic_machine ;; leon-*|leon[3-9]-*) cpu=sparc vendor=`echo "$basic_machine" | sed 's/-.*//'` ;; *-*) saved_IFS=$IFS IFS="-" read cpu vendor <&2 exit 1 ;; esac ;; esac # Here we canonicalize certain aliases for manufacturers. case $vendor in digital*) vendor=dec ;; commodore*) vendor=cbm ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if test x"$basic_os" != x then # First recognize some ad-hoc cases, or perhaps split kernel-os, or else just # set os. obj= case $basic_os in gnu/linux*) kernel=linux os=`echo "$basic_os" | sed -e 's|gnu/linux|gnu|'` ;; os2-emx) kernel=os2 os=`echo "$basic_os" | sed -e 's|os2-emx|emx|'` ;; nto-qnx*) kernel=nto os=`echo "$basic_os" | sed -e 's|nto-qnx|qnx|'` ;; *-*) saved_IFS=$IFS IFS="-" read kernel os <&2 fi ;; *) echo "Invalid configuration '$1': OS '$os' not recognized" 1>&2 exit 1 ;; esac case $obj in aout* | coff* | elf* | pe*) ;; '') # empty is fine ;; *) echo "Invalid configuration '$1': Machine code format '$obj' not recognized" 1>&2 exit 1 ;; esac # Here we handle the constraint that a (synthetic) cpu and os are # valid only in combination with each other and nowhere else. case $cpu-$os in # The "javascript-unknown-ghcjs" triple is used by GHC; we # accept it here in order to tolerate that, but reject any # variations. javascript-ghcjs) ;; javascript-* | *-ghcjs) echo "Invalid configuration '$1': cpu '$cpu' is not valid with os '$os$obj'" 1>&2 exit 1 ;; esac # As a final step for OS-related things, validate the OS-kernel combination # (given a valid OS), if there is a kernel. case $kernel-$os-$obj in linux-gnu*- | linux-android*- | linux-dietlibc*- | linux-llvm*- \ | linux-mlibc*- | linux-musl*- | linux-newlib*- \ | linux-relibc*- | linux-uclibc*- | linux-ohos*- ) ;; uclinux-uclibc*- | uclinux-gnu*- ) ;; ironclad-mlibc*-) ;; managarm-mlibc*- | managarm-kernel*- ) ;; windows*-msvc*-) ;; -dietlibc*- | -llvm*- | -mlibc*- | -musl*- | -newlib*- | -relibc*- \ | -uclibc*- ) # These are just libc implementations, not actual OSes, and thus # require a kernel. echo "Invalid configuration '$1': libc '$os' needs explicit kernel." 1>&2 exit 1 ;; -kernel*- ) echo "Invalid configuration '$1': '$os' needs explicit kernel." 1>&2 exit 1 ;; *-kernel*- ) echo "Invalid configuration '$1': '$kernel' does not support '$os'." 1>&2 exit 1 ;; *-msvc*- ) echo "Invalid configuration '$1': '$os' needs 'windows'." 1>&2 exit 1 ;; kfreebsd*-gnu*- | knetbsd*-gnu*- | netbsd*-gnu*- | kopensolaris*-gnu*-) ;; vxworks-simlinux- | vxworks-simwindows- | vxworks-spe-) ;; nto-qnx*-) ;; os2-emx-) ;; rtmk-nova-) ;; *-eabi*- | *-gnueabi*-) ;; ios*-simulator- | tvos*-simulator- | watchos*-simulator- ) ;; none--*) # None (no kernel, i.e. freestanding / bare metal), # can be paired with an machine code file format ;; -*-) # Blank kernel with real OS is always fine. ;; --*) # Blank kernel and OS with real machine code file format is always fine. ;; *-*-*) echo "Invalid configuration '$1': Kernel '$kernel' not known to work with OS '$os'." 1>&2 exit 1 ;; esac # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. case $vendor in unknown) case $cpu-$os in *-riscix*) vendor=acorn ;; *-sunos* | *-solaris*) vendor=sun ;; *-cnk* | *-aix*) vendor=ibm ;; *-beos*) vendor=be ;; *-hpux*) vendor=hp ;; *-mpeix*) vendor=hp ;; *-hiux*) vendor=hitachi ;; *-unos*) vendor=crds ;; *-dgux*) vendor=dg ;; *-luna*) vendor=omron ;; *-genix*) vendor=ns ;; *-clix*) vendor=intergraph ;; *-mvs* | *-opened*) vendor=ibm ;; *-os400*) vendor=ibm ;; s390-* | s390x-*) vendor=ibm ;; *-ptx*) vendor=sequent ;; *-tpf*) vendor=ibm ;; *-vxsim* | *-vxworks* | *-windiss*) vendor=wrs ;; *-aux*) vendor=apple ;; *-hms*) vendor=hitachi ;; *-mpw* | *-macos*) vendor=apple ;; *-*mint | *-mint[0-9]* | *-*MiNT | *-MiNT[0-9]*) vendor=atari ;; *-vos*) vendor=stratus ;; esac ;; esac echo "$cpu-$vendor${kernel:+-$kernel}${os:+-$os}${obj:+-$obj}" exit # Local variables: # eval: (add-hook 'before-save-hook 'time-stamp nil t) # time-stamp-start: "timestamp='" # time-stamp-format: "%Y-%02m-%02d" # time-stamp-end: "'" # End: libsodium-1.0.22-RELEASE/build-aux/depcomp000077500000000000000000000562241516601152600201240ustar00rootroot00000000000000#! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2025-06-18.21; # UTC # Copyright (C) 1999-2025 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by 'PROGRAMS ARGS'. object Object file output by 'PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputting dependencies. libtool Whether libtool is used (yes/no). Report bugs to . GNU Automake home page: . General help using GNU software: . EOF exit $? ;; -v | --v*) echo "depcomp (GNU Automake) $scriptversion" exit $? ;; esac # Get the directory component of the given path, and save it in the # global variables '$dir'. Note that this directory component will # be either empty or ending with a '/' character. This is deliberate. set_dir_from () { case $1 in */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; *) dir=;; esac } # Get the suffix-stripped basename of the given path, and save it the # global variable '$base'. set_base_from () { base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` } # If no dependency file was actually created by the compiler invocation, # we still have to create a dummy depfile, to avoid errors with the # Makefile "include basename.Plo" scheme. make_dummy_depfile () { echo "#dummy" > "$depfile" } # Factor out some common post-processing of the generated depfile. # Requires the auxiliary global variable '$tmpdepfile' to be set. aix_post_process_depfile () { # If the compiler actually managed to produce a dependency file, # post-process it. if test -f "$tmpdepfile"; then # Each line is of the form 'foo.o: dependency.h'. # Do two passes, one to just change these to # $object: dependency.h # and one to simply output # dependency.h: # which is needed to avoid the deleted-header problem. { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" } > "$depfile" rm -f "$tmpdepfile" else make_dummy_depfile fi } # A tabulation character. tab=' ' # A newline character. nl=' ' # Character ranges might be problematic outside the C locale. # These definitions help. upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ lower=abcdefghijklmnopqrstuvwxyz alpha=${upper}${lower} if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Avoid interference from the environment. gccflag= dashmflag= # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi cygpath_u="cygpath -u -f -" if test "$depmode" = msvcmsys; then # This is just like msvisualcpp but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvisualcpp fi if test "$depmode" = msvc7msys; then # This is just like msvc7 but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvc7 fi if test "$depmode" = xlc; then # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. gccflag=-qmakedep=gcc,-MF depmode=gcc fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. ## Unfortunately, FreeBSD c89 acceptance of flags depends upon ## the command line argument order; so add the flags where they ## appear in depend2.am. Note that the slowdown incurred here ## affects only configure: in makefiles, %FASTDEP% shortcuts this. for arg do case $arg in -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; *) set fnord "$@" "$arg" ;; esac shift # fnord shift # $arg done "$@" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## Note that this doesn't just cater to obsolete pre-3.x GCC compilers. ## but also to in-use compilers like IBM xlc/xlC and the HP C compiler. ## (see the conditional assignment to $gccflag above). ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). Also, it might not be ## supported by the other compilers which use the 'gcc' depmode. ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The second -e expression handles DOS-style file names with drive # letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the "deleted header file" problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. ## Some versions of gcc put a space before the ':'. On the theory ## that the space means something, we add a space to the output as ## well. hp depmode also adds that space, but also prefixes the VPATH ## to the object. Take care to not repeat it in the output. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like '#:fec' to the end of the # dependency line. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ | tr "$nl" ' ' >> "$depfile" echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" ;; xlc) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts '$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else tmpdepfile1=$dir$base.u tmpdepfile2=$dir$base.u tmpdepfile3=$dir$base.u "$@" -M fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done aix_post_process_depfile ;; tcc) # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 # FIXME: That version still under development at the moment of writing. # Make that this statement remains true also for stable, released # versions. # It will wrap lines (doesn't matter whether long or short) with a # trailing '\', as in: # # foo.o : \ # foo.c \ # foo.h \ # # It will put a trailing '\' even on the last line, and will use leading # spaces rather than leading tabs (at least since its commit 0394caf7 # "Emit spaces for -MD"). "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. # We have to change lines of the first kind to '$object: \'. sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" # And for each line of the second kind, we have to emit a 'dep.h:' # dummy dependency, to avoid the deleted-header problem. sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" rm -f "$tmpdepfile" ;; ## The order of this option in the case statement is important, since the ## shell code in configure will try each of these formats in the order ## listed in this file. A plain '-MD' option would be understood by many ## compilers, so we must ensure this comes after the gcc and icc options. pgcc) # Portland's C compiler understands '-MD'. # Will always output deps to 'file.d' where file is the root name of the # source file under compilation, even if file resides in a subdirectory. # The object file name does not affect the name of the '.d' file. # pgcc 10.2 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using '\' : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... set_dir_from "$object" # Use the source, not the object, to determine the base name, since # that's sadly what pgcc will do too. set_base_from "$source" tmpdepfile=$base.d # For projects that build the same source file twice into different object # files, the pgcc approach of using the *source* file root name can cause # problems in parallel builds. Use a locking strategy to avoid stomping on # the same $tmpdepfile. lockdir=$base.d-lock trap " echo '$0: caught signal, cleaning up...' >&2 rmdir '$lockdir' exit 1 " 1 2 13 15 numtries=100 i=$numtries while test $i -gt 0; do # mkdir is a portable test-and-set. if mkdir "$lockdir" 2>/dev/null; then # This process acquired the lock. "$@" -MD stat=$? # Release the lock. rmdir "$lockdir" break else # If the lock is being held by a different process, wait # until the winning process is done or we timeout. while test -d "$lockdir" && test $i -gt 0; do sleep 1 i=`expr $i - 1` done fi i=`expr $i - 1` done trap - 1 2 13 15 if test $i -le 0; then echo "$0: failed to acquire lock after $numtries attempts" >&2 echo "$0: check lockdir '$lockdir'" >&2 exit 1 fi if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp2) # The "hp" stanza above does not work with aCC (C++) and HP's ia64 # compilers, which have integrated preprocessors. The correct option # to use with these is +Maked; it writes dependencies to a file named # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d "$@" -Wc,+Maked else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d "$@" +Maked fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" # Add 'dependent.h:' lines. sed -ne '2,${ s/^ *// s/ \\*$// s/$/:/ p }' "$tmpdepfile" >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in 'foo.d' instead, so we check for that too. # Subdirectories are respected. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then # Libtool generates 2 separate objects for the 2 libraries. These # two compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir$base.o.d # libtool 1.5 tmpdepfile2=$dir.libs/$base.o.d # Likewise. tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d "$@" -MD fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done # Same post-processing that is required for AIX mode. aix_post_process_depfile ;; msvc7) if test "$libtool" = yes; then showIncludes=-Wc,-showIncludes else showIncludes=-showIncludes fi "$@" $showIncludes > "$tmpdepfile" stat=$? grep -v '^Note: including file: ' "$tmpdepfile" if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The first sed program below extracts the file names and escapes # backslashes for cygpath. The second sed program outputs the file # name when reading, but also accumulates all include files in the # hold buffer in order to output them again at the end. This only # works with sed implementations that can handle large buffers. sed < "$tmpdepfile" -n ' /^Note: including file: *\(.*\)/ { s//\1/ s/\\/\\\\/g p }' | $cygpath_u | sort -u | sed -n ' s/ /\\ /g s/\(.*\)/'"$tab"'\1 \\/p s/.\(.*\) \\/\1:/ H $ { s/.*/'"$tab"'/ G p }' >> "$depfile" echo >> "$depfile" # make sure the fragment doesn't end with a backslash rm -f "$tmpdepfile" ;; msvc7msys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for ':' # in the target name. This is to cope with DOS-style filenames: # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. "$@" $dashmflag | sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this sed invocation # correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift cleared=no eat=no for arg do case $cleared in no) set ""; shift cleared=yes ;; esac if test $eat = yes; then eat=no continue fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -arch) eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" # makedepend may prepend the VPATH from the source file name to the object. # No need to regex-escape $object, excess matching of '.' is harmless. sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process the last invocation # correctly. Breaking it into two sed invocations is a workaround. sed '1,2d' "$tmpdepfile" \ | tr ' ' "$nl" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E \ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi IFS=" " for arg do case "$arg" in -o) shift ;; $object) shift ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E 2>/dev/null | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" echo "$tab" >> "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; msvcmsys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'before-save-hook 'time-stamp nil t) # time-stamp-start: "scriptversion=" # time-stamp-format: "%Y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: libsodium-1.0.22-RELEASE/build-aux/install-sh000077500000000000000000000361221516601152600205460ustar00rootroot00000000000000#!/bin/sh # install - install a program, script, or datafile scriptversion=2025-06-18.21; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # 'make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. tab=' ' nl=' ' IFS=" $tab$nl" # Set DOITPROG to "echo" to test this script. doit=${DOITPROG-} doit_exec=${doit:-exec} # Put in absolute file names if you don't have them in your path; # or use environment vars. chgrpprog=${CHGRPPROG-chgrp} chmodprog=${CHMODPROG-chmod} chownprog=${CHOWNPROG-chown} cmpprog=${CMPPROG-cmp} cpprog=${CPPROG-cp} mkdirprog=${MKDIRPROG-mkdir} mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} posix_mkdir= # Desired mode of installed file. mode=0755 # Create dirs (including intermediate dirs) using mode 755. # This is like GNU 'install' as of coreutils 8.32 (2020). mkdir_umask=22 backupsuffix= chgrpcmd= chmodcmd=$chmodprog chowncmd= mvcmd=$mvprog rmcmd="$rmprog -f" stripcmd= src= dst= dir_arg= dst_arg= copy_on_change=false is_target_a_directory=possibly usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: --help display this help and exit. --version display version info and exit. -c (ignored) -C install only if different (preserve data modification time) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -p pass -p to $cpprog. -s $stripprog installed files. -S SUFFIX attempt to back up existing files, with suffix SUFFIX. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG By default, rm is invoked with -f; when overridden with RMPROG, it's up to you to specify -f if you want it. If -S is not specified, no backups are attempted. Report bugs to . GNU Automake home page: . General help using GNU software: ." while test $# -ne 0; do case $1 in -c) ;; -C) copy_on_change=true;; -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 case $mode in *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) echo "$0: invalid mode: $mode" >&2 exit 1;; esac shift;; -o) chowncmd="$chownprog $2" shift;; -p) cpprog="$cpprog -p";; -s) stripcmd=$stripprog;; -S) backupsuffix="$2" shift;; -t) is_target_a_directory=always dst_arg=$2 # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac shift;; -T) is_target_a_directory=never;; --version) echo "$0 (GNU Automake) $scriptversion"; exit $?;; --) shift break;; -*) echo "$0: invalid option: $1" >&2 exit 1;; *) break;; esac shift done # We allow the use of options -d and -T together, by making -d # take the precedence; this is for compatibility with GNU install. if test -n "$dir_arg"; then if test -n "$dst_arg"; then echo "$0: target directory not allowed when installing a directory." >&2 exit 1 fi fi if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dst_arg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dst_arg" shift # fnord fi shift # arg dst_arg=$arg # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac done fi if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call 'install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then if test $# -gt 1 || test "$is_target_a_directory" = always; then if test ! -d "$dst_arg"; then echo "$0: $dst_arg: Is not a directory." >&2 exit 1 fi fi fi if test -z "$dir_arg"; then do_exit='(exit $ret); exit $ret' trap "ret=129; $do_exit" 1 trap "ret=130; $do_exit" 2 trap "ret=141; $do_exit" 13 trap "ret=143; $do_exit" 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. case $mode in # Optimize common cases. *644) cp_umask=133;; *755) cp_umask=22;; *[0-7]) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac fi for src do # Protect names problematic for 'test' and other utilities. case $src in -* | [=\(\)!]) src=./$src;; esac if test -n "$dir_arg"; then dst=$src dstdir=$dst test -d "$dstdir" dstdir_status=$? # Don't chown directories that already exist. if test $dstdir_status = 0; then chowncmd="" fi else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dst_arg # If destination is a directory, append the input filename. if test -d "$dst"; then if test "$is_target_a_directory" = never; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst dstbase=`basename "$src"` case $dst in */) dst=$dst$dstbase;; *) dst=$dst/$dstbase;; esac dstdir_status=0 else dstdir=`dirname "$dst"` test -d "$dstdir" dstdir_status=$? fi fi case $dstdir in */) dstdirslash=$dstdir;; *) dstdirslash=$dstdir/;; esac obsolete_mkdir_used=false if test $dstdir_status != 0; then case $posix_mkdir in '') # With -d, create the new directory with the user-specified mode. # Otherwise, rely on $mkdir_umask. if test -n "$dir_arg"; then mkdir_mode=-m$mode else mkdir_mode= fi posix_mkdir=false # The $RANDOM variable is not portable (e.g., dash). Use it # here however when possible just to lower collision chance. tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ trap ' ret=$? rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null exit $ret ' 0 # Because "mkdir -p" follows existing symlinks and we likely work # directly in world-writable /tmp, make sure that the '$tmpdir' # directory is successfully created first before we actually test # 'mkdir -p'. if (umask $mkdir_umask && $mkdirprog $mkdir_mode "$tmpdir" && exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibility with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. test_tmpdir="$tmpdir/a" ls_ld_tmpdir=`ls -ld "$test_tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null fi trap '' 0;; esac if $posix_mkdir && ( umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else # mkdir does not conform to POSIX, # or it failed possibly due to a race condition. Create the # directory the slow way, step by step, checking for races as we go. case $dstdir in /*) prefix='/';; [-=\(\)!]*) prefix='./';; *) prefix='';; esac oIFS=$IFS IFS=/ set -f set fnord $dstdir shift set +f IFS=$oIFS prefixes= for d do test X"$d" = X && continue prefix=$prefix$d if test -d "$prefix"; then prefixes= else if $posix_mkdir; then (umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break # Don't fail if two instances are running concurrently. test -d "$prefix" || exit 1 else case $prefix in *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; *) qprefix=$prefix;; esac prefixes="$prefixes '$qprefix'" fi fi prefix=$prefix/ done if test -n "$prefixes"; then # Don't fail if two instances are running concurrently. (umask $mkdir_umask && eval "\$doit_exec \$mkdirprog $prefixes") || test -d "$dstdir" || exit 1 obsolete_mkdir_used=true fi fi fi if test -n "$dir_arg"; then { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else # Make a couple of temp file names in the proper directory. dsttmp=${dstdirslash}_inst.$$_ rmtmp=${dstdirslash}_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. (umask $cp_umask && { test -z "$stripcmd" || { # Create $dsttmp read-write so that cp doesn't create it read-only, # which would cause strip to fail. if test -z "$doit"; then : >"$dsttmp" # No need to fork-exec 'touch'. else $doit touch "$dsttmp" fi } } && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then rm -f "$dsttmp" else # If $backupsuffix is set, and the file being installed # already exists, attempt a backup. Don't worry if it fails, # e.g., if mv doesn't support -f. if test -n "$backupsuffix" && test -f "$dst"; then $doit $mvcmd -f "$dst" "$dst$backupsuffix" 2>/dev/null fi # Rename the file to the real destination. $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. { # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { test ! -f "$dst" || $doit $rmcmd "$dst" 2>/dev/null || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && { $doit $rmcmd "$rmtmp" 2>/dev/null; :; } } || { echo "$0: cannot unlink or rename $dst" >&2 (exit 1); exit 1 } } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 trap '' 0 fi done # Local variables: # eval: (add-hook 'before-save-hook 'time-stamp nil t) # time-stamp-start: "scriptversion=" # time-stamp-format: "%Y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: libsodium-1.0.22-RELEASE/build-aux/ltmain.sh000066400000000000000000012232221516601152600203620ustar00rootroot00000000000000#! /usr/bin/env sh ## DO NOT EDIT - This file generated from ./build-aux/ltmain.in ## by inline-source v2019-02-19.15 # libtool (GNU libtool) 2.5.4 # Provide generalized library-building support services. # Written by Gordon Matzigkeit , 1996 # Copyright (C) 1996-2019, 2021-2024 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . PROGRAM=libtool PACKAGE=libtool VERSION=2.5.4 package_revision=2.5.4 ## ------ ## ## Usage. ## ## ------ ## # Run './libtool --help' for help with using this script from the # command line. ## ------------------------------- ## ## User overridable command paths. ## ## ------------------------------- ## # After configure completes, it has a better idea of some of the # shell tools we need than the defaults used by the functions shared # with bootstrap, so set those here where they can still be over- # ridden by the user, but otherwise take precedence. : ${AUTOCONF="autoconf"} : ${AUTOMAKE="automake"} ## -------------------------- ## ## Source external libraries. ## ## -------------------------- ## # Much of our low-level functionality needs to be sourced from external # libraries, which are installed to $pkgauxdir. # Set a version string for this script. scriptversion=2019-02-19.15; # UTC # General shell script boiler plate, and helper functions. # Written by Gary V. Vaughan, 2004 # This is free software. There is NO warranty; not even for # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # # Copyright (C) 2004-2019, 2021, 2023-2024 Bootstrap Authors # # This file is dual licensed under the terms of the MIT license # , and GPL version 2 or later # . You must apply one of # these licenses when using or redistributing this software or any of # the files within it. See the URLs above, or the file `LICENSE` # included in the Bootstrap distribution for the full license texts. # Please report bugs or propose patches to: # ## ------ ## ## Usage. ## ## ------ ## # Evaluate this file near the top of your script to gain access to # the functions and variables defined here: # # . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh # # If you need to override any of the default environment variable # settings, do that before evaluating this file. ## -------------------- ## ## Shell normalisation. ## ## -------------------- ## # Some shells need a little help to be as Bourne compatible as possible. # Before doing anything else, make sure all that help has been provided! DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi # NLS nuisances: We save the old values in case they are required later. _G_user_locale= _G_safe_locale= for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test set = \"\${$_G_var+set}\"; then save_$_G_var=\$$_G_var $_G_var=C export $_G_var _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\" _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\" fi" done # These NLS vars are set unconditionally (bootstrap issue #24). Unset those # in case the environment reset is needed later and the $save_* variant is not # defined (see the code above). LC_ALL=C LANGUAGE=C export LANGUAGE LC_ALL # Make sure IFS has a sensible default sp=' ' nl=' ' IFS="$sp $nl" # There are apparently some systems that use ';' as a PATH separator! if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # func_unset VAR # -------------- # Portably unset VAR. # In some shells, an 'unset VAR' statement leaves a non-zero return # status if VAR is already unset, which might be problematic if the # statement is used at the end of a function (thus poisoning its return # value) or when 'set -e' is active (causing even a spurious abort of # the script in this case). func_unset () { { eval $1=; (eval unset $1) >/dev/null 2>&1 && eval unset $1 || : ; } } # Make sure CDPATH doesn't cause `cd` commands to output the target dir. func_unset CDPATH # Make sure ${,E,F}GREP behave sanely. func_unset GREP_OPTIONS ## ------------------------- ## ## Locate command utilities. ## ## ------------------------- ## # func_executable_p FILE # ---------------------- # Check that FILE is an executable regular file. func_executable_p () { test -f "$1" && test -x "$1" } # func_path_progs PROGS_LIST CHECK_FUNC [PATH] # -------------------------------------------- # Search for either a program that responds to --version with output # containing "GNU", or else returned by CHECK_FUNC otherwise, by # trying all the directories in PATH with each of the elements of # PROGS_LIST. # # CHECK_FUNC should accept the path to a candidate program, and # set $func_check_prog_result if it truncates its output less than # $_G_path_prog_max characters. func_path_progs () { _G_progs_list=$1 _G_check_func=$2 _G_PATH=${3-"$PATH"} _G_path_prog_max=0 _G_path_prog_found=false _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:} for _G_dir in $_G_PATH; do IFS=$_G_save_IFS test -z "$_G_dir" && _G_dir=. for _G_prog_name in $_G_progs_list; do for _exeext in '' .EXE; do _G_path_prog=$_G_dir/$_G_prog_name$_exeext func_executable_p "$_G_path_prog" || continue case `"$_G_path_prog" --version 2>&1` in *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;; *) $_G_check_func $_G_path_prog func_path_progs_result=$func_check_prog_result ;; esac $_G_path_prog_found && break 3 done done done IFS=$_G_save_IFS test -z "$func_path_progs_result" && { echo "no acceptable sed could be found in \$PATH" >&2 exit 1 } } # We want to be able to use the functions in this file before configure # has figured out where the best binaries are kept, which means we have # to search for them ourselves - except when the results are already set # where we skip the searches. # Unless the user overrides by setting SED, search the path for either GNU # sed, or the sed that truncates its output the least. test -z "$SED" && { _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ for _G_i in 1 2 3 4 5 6 7; do _G_sed_script=$_G_sed_script$nl$_G_sed_script done echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed _G_sed_script= func_check_prog_sed () { _G_path_prog=$1 _G_count=0 printf 0123456789 >conftest.in while : do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo '' >> conftest.nl "$_G_path_prog" -f conftest.sed conftest.out 2>/dev/null || break diff conftest.out conftest.nl >/dev/null 2>&1 || break _G_count=`expr $_G_count + 1` if test "$_G_count" -gt "$_G_path_prog_max"; then # Best one so far, save it but keep looking for a better one func_check_prog_result=$_G_path_prog _G_path_prog_max=$_G_count fi # 10*(2^10) chars as input seems more than enough test 10 -lt "$_G_count" && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out } func_path_progs "sed gsed" func_check_prog_sed "$PATH:/usr/xpg4/bin" rm -f conftest.sed SED=$func_path_progs_result } # Unless the user overrides by setting GREP, search the path for either GNU # grep, or the grep that truncates its output the least. test -z "$GREP" && { func_check_prog_grep () { _G_path_prog=$1 _G_count=0 _G_path_prog_max=0 printf 0123456789 >conftest.in while : do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo 'GREP' >> conftest.nl "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' conftest.out 2>/dev/null || break diff conftest.out conftest.nl >/dev/null 2>&1 || break _G_count=`expr $_G_count + 1` if test "$_G_count" -gt "$_G_path_prog_max"; then # Best one so far, save it but keep looking for a better one func_check_prog_result=$_G_path_prog _G_path_prog_max=$_G_count fi # 10*(2^10) chars as input seems more than enough test 10 -lt "$_G_count" && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out } func_path_progs "grep ggrep" func_check_prog_grep "$PATH:/usr/xpg4/bin" GREP=$func_path_progs_result } ## ------------------------------- ## ## User overridable command paths. ## ## ------------------------------- ## # All uppercase variable names are used for environment variables. These # variables can be overridden by the user before calling a script that # uses them if a suitable command of that name is not already available # in the command search PATH. : ${CP="cp -f"} : ${ECHO="printf %s\n"} : ${EGREP="$GREP -E"} : ${FGREP="$GREP -F"} : ${LN_S="ln -s"} : ${MAKE="make"} : ${MKDIR="mkdir"} : ${MV="mv -f"} : ${RM="rm -f"} : ${SHELL="${CONFIG_SHELL-/bin/sh}"} ## -------------------- ## ## Useful sed snippets. ## ## -------------------- ## sed_dirname='s|/[^/]*$||' sed_basename='s|^.*/||' # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. sed_quote_subst='s|\([`"$\\]\)|\\\1|g' # Same as above, but do not quote variable references. sed_double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution that turns a string into a regex matching for the # string literally. sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g' # Sed substitution that converts a w32 file name or path # that contains forward slashes, into one that contains # (escaped) backslashes. A very naive implementation. sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' # Re-'\' parameter expansions in output of sed_double_quote_subst that # were '\'-ed in input to the same. If an odd number of '\' preceded a # '$' in input to sed_double_quote_subst, that '$' was protected from # expansion. Since each input '\' is now two '\'s, look for any number # of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'. _G_bs='\\' _G_bs2='\\\\' _G_bs4='\\\\\\\\' _G_dollar='\$' sed_double_backslash="\ s/$_G_bs4/&\\ /g s/^$_G_bs2$_G_dollar/$_G_bs&/ s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g s/\n//g" # require_check_ifs_backslash # --------------------------- # Check if we can use backslash as IFS='\' separator, and set # $check_ifs_backshlash_broken to ':' or 'false'. require_check_ifs_backslash=func_require_check_ifs_backslash func_require_check_ifs_backslash () { _G_save_IFS=$IFS IFS='\' _G_check_ifs_backshlash='a\\b' for _G_i in $_G_check_ifs_backshlash do case $_G_i in a) check_ifs_backshlash_broken=false ;; '') break ;; *) check_ifs_backshlash_broken=: break ;; esac done IFS=$_G_save_IFS require_check_ifs_backslash=: } ## ----------------- ## ## Global variables. ## ## ----------------- ## # Except for the global variables explicitly listed below, the following # functions in the '^func_' namespace, and the '^require_' namespace # variables initialised in the 'Resource management' section, sourcing # this file will not pollute your global namespace with anything # else. There's no portable way to scope variables in Bourne shell # though, so actually running these functions will sometimes place # results into a variable named after the function, and often use # temporary variables in the '^_G_' namespace. If you are careful to # avoid using those namespaces casually in your sourcing script, things # should continue to work as you expect. And, of course, you can freely # overwrite any of the functions or variables defined here before # calling anything to customize them. EXIT_SUCCESS=0 EXIT_FAILURE=1 EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. # Allow overriding, eg assuming that you follow the convention of # putting '$debug_cmd' at the start of all your functions, you can get # bash to show function call trace with: # # debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name debug_cmd=${debug_cmd-":"} exit_cmd=: # By convention, finish your script with: # # exit $exit_status # # so that you can set exit_status to non-zero if you want to indicate # something went wrong during execution without actually bailing out at # the point of failure. exit_status=$EXIT_SUCCESS # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh # is ksh but when the shell is invoked as "sh" and the current value of # the _XPG environment variable is not equal to 1 (one), the special # positional parameter $0, within a function call, is the name of the # function. progpath=$0 # The name of this program. progname=`$ECHO "$progpath" |$SED "$sed_basename"` # Make sure we have an absolute progpath for reexecution: case $progpath in [\\/]*|[A-Za-z]:\\*) ;; *[\\/]*) progdir=`$ECHO "$progpath" |$SED "$sed_dirname"` progdir=`cd "$progdir" && pwd` progpath=$progdir/$progname ;; *) _G_IFS=$IFS IFS=${PATH_SEPARATOR-:} for progdir in $PATH; do IFS=$_G_IFS test -x "$progdir/$progname" && break done IFS=$_G_IFS test -n "$progdir" || progdir=`pwd` progpath=$progdir/$progname ;; esac ## ----------------- ## ## Standard options. ## ## ----------------- ## # The following options affect the operation of the functions defined # below, and should be set appropriately depending on run-time para- # meters passed on the command line. opt_dry_run=false opt_quiet=false opt_verbose=false # Categories 'all' and 'none' are always available. Append any others # you will pass as the first argument to func_warning from your own # code. warning_categories= # By default, display warnings according to 'opt_warning_types'. Set # 'warning_func' to ':' to elide all warnings, or func_fatal_error to # treat the next displayed warning as a fatal error. warning_func=func_warn_and_continue # Set to 'all' to display all warnings, 'none' to suppress all # warnings, or a space delimited list of some subset of # 'warning_categories' to display only the listed warnings. opt_warning_types=all ## -------------------- ## ## Resource management. ## ## -------------------- ## # This section contains definitions for functions that each ensure a # particular resource (a file, or a non-empty configuration variable for # example) is available, and if appropriate to extract default values # from pertinent package files. Call them using their associated # 'require_*' variable to ensure that they are executed, at most, once. # # It's entirely deliberate that calling these functions can set # variables that don't obey the namespace limitations obeyed by the rest # of this file, in order that that they be as useful as possible to # callers. # require_term_colors # ------------------- # Allow display of bold text on terminals that support it. require_term_colors=func_require_term_colors func_require_term_colors () { $debug_cmd test -t 1 && { # COLORTERM and USE_ANSI_COLORS environment variables take # precedence, because most terminfo databases neglect to describe # whether color sequences are supported. test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"} if test 1 = "$USE_ANSI_COLORS"; then # Standard ANSI escape sequences tc_reset='' tc_bold=''; tc_standout='' tc_red=''; tc_green='' tc_blue=''; tc_cyan='' else # Otherwise trust the terminfo database after all. test -n "`tput sgr0 2>/dev/null`" && { tc_reset=`tput sgr0` test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold` tc_standout=$tc_bold test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso` test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1` test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2` test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4` test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5` } fi } require_term_colors=: } ## ----------------- ## ## Function library. ## ## ----------------- ## # This section contains a variety of useful functions to call in your # scripts. Take note of the portable wrappers for features provided by # some modern shells, which will fall back to slower equivalents on # less featureful shells. # func_append VAR VALUE # --------------------- # Append VALUE onto the existing contents of VAR. # We should try to minimise forks, especially on Windows where they are # unreasonably slow, so skip the feature probes when bash or zsh are # being used: if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then : ${_G_HAVE_ARITH_OP="yes"} : ${_G_HAVE_XSI_OPS="yes"} # The += operator was introduced in bash 3.1 case $BASH_VERSION in [12].* | 3.0 | 3.0*) ;; *) : ${_G_HAVE_PLUSEQ_OP="yes"} ;; esac fi # _G_HAVE_PLUSEQ_OP # Can be empty, in which case the shell is probed, "yes" if += is # usable or anything else if it does not work. test -z "$_G_HAVE_PLUSEQ_OP" \ && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \ && _G_HAVE_PLUSEQ_OP=yes if test yes = "$_G_HAVE_PLUSEQ_OP" then # This is an XSI compatible shell, allowing a faster implementation... eval 'func_append () { $debug_cmd eval "$1+=\$2" }' else # ...otherwise fall back to using expr, which is often a shell builtin. func_append () { $debug_cmd eval "$1=\$$1\$2" } fi # func_append_quoted VAR VALUE # ---------------------------- # Quote VALUE and append to the end of shell variable VAR, separated # by a space. if test yes = "$_G_HAVE_PLUSEQ_OP"; then eval 'func_append_quoted () { $debug_cmd func_quote_arg pretty "$2" eval "$1+=\\ \$func_quote_arg_result" }' else func_append_quoted () { $debug_cmd func_quote_arg pretty "$2" eval "$1=\$$1\\ \$func_quote_arg_result" } fi # func_append_uniq VAR VALUE # -------------------------- # Append unique VALUE onto the existing contents of VAR, assuming # entries are delimited by the first character of VALUE. For example: # # func_append_uniq options " --another-option option-argument" # # will only append to $options if " --another-option option-argument " # is not already present somewhere in $options already (note spaces at # each end implied by leading space in second argument). func_append_uniq () { $debug_cmd eval _G_current_value='`$ECHO $'$1'`' _G_delim=`expr "$2" : '\(.\)'` case $_G_delim$_G_current_value$_G_delim in *"$2$_G_delim"*) ;; *) func_append "$@" ;; esac } # func_arith TERM... # ------------------ # Set func_arith_result to the result of evaluating TERMs. test -z "$_G_HAVE_ARITH_OP" \ && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \ && _G_HAVE_ARITH_OP=yes if test yes = "$_G_HAVE_ARITH_OP"; then eval 'func_arith () { $debug_cmd func_arith_result=$(( $* )) }' else func_arith () { $debug_cmd func_arith_result=`expr "$@"` } fi # func_basename FILE # ------------------ # Set func_basename_result to FILE with everything up to and including # the last / stripped. if test yes = "$_G_HAVE_XSI_OPS"; then # If this shell supports suffix pattern removal, then use it to avoid # forking. Hide the definitions single quotes in case the shell chokes # on unsupported syntax... _b='func_basename_result=${1##*/}' _d='case $1 in */*) func_dirname_result=${1%/*}$2 ;; * ) func_dirname_result=$3 ;; esac' else # ...otherwise fall back to using sed. _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`' _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"` if test "X$func_dirname_result" = "X$1"; then func_dirname_result=$3 else func_append func_dirname_result "$2" fi' fi eval 'func_basename () { $debug_cmd '"$_b"' }' # func_dirname FILE APPEND NONDIR_REPLACEMENT # ------------------------------------------- # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. eval 'func_dirname () { $debug_cmd '"$_d"' }' # func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT # -------------------------------------------------------- # Perform func_basename and func_dirname in a single function # call: # dirname: Compute the dirname of FILE. If nonempty, # add APPEND to the result, otherwise set result # to NONDIR_REPLACEMENT. # value returned in "$func_dirname_result" # basename: Compute filename of FILE. # value returned in "$func_basename_result" # For efficiency, we do not delegate to the functions above but instead # duplicate the functionality here. eval 'func_dirname_and_basename () { $debug_cmd '"$_b"' '"$_d"' }' # func_echo ARG... # ---------------- # Echo program name prefixed message. func_echo () { $debug_cmd _G_message=$* func_echo_IFS=$IFS IFS=$nl for _G_line in $_G_message; do IFS=$func_echo_IFS $ECHO "$progname: $_G_line" done IFS=$func_echo_IFS } # func_echo_all ARG... # -------------------- # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "$*" } # func_echo_infix_1 INFIX ARG... # ------------------------------ # Echo program name, followed by INFIX on the first line, with any # additional lines not showing INFIX. func_echo_infix_1 () { $debug_cmd $require_term_colors _G_infix=$1; shift _G_indent=$_G_infix _G_prefix="$progname: $_G_infix: " _G_message=$* # Strip color escape sequences before counting printable length for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan" do test -n "$_G_tc" && { _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"` _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"` } done _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes func_echo_infix_1_IFS=$IFS IFS=$nl for _G_line in $_G_message; do IFS=$func_echo_infix_1_IFS $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2 _G_prefix=$_G_indent done IFS=$func_echo_infix_1_IFS } # func_error ARG... # ----------------- # Echo program name prefixed message to standard error. func_error () { $debug_cmd $require_term_colors func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2 } # func_fatal_error ARG... # ----------------------- # Echo program name prefixed message to standard error, and exit. func_fatal_error () { $debug_cmd func_error "$*" exit $EXIT_FAILURE } # func_grep EXPRESSION FILENAME # ----------------------------- # Check whether EXPRESSION matches any line of FILENAME, without output. func_grep () { $debug_cmd $GREP "$1" "$2" >/dev/null 2>&1 } # func_len STRING # --------------- # Set func_len_result to the length of STRING. STRING may not # start with a hyphen. test -z "$_G_HAVE_XSI_OPS" \ && (eval 'x=a/b/c; test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ && _G_HAVE_XSI_OPS=yes if test yes = "$_G_HAVE_XSI_OPS"; then eval 'func_len () { $debug_cmd func_len_result=${#1} }' else func_len () { $debug_cmd func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` } fi # func_mkdir_p DIRECTORY-PATH # --------------------------- # Make sure the entire path to DIRECTORY-PATH is available. func_mkdir_p () { $debug_cmd _G_directory_path=$1 _G_dir_list= if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then # Protect directory names starting with '-' case $_G_directory_path in -*) _G_directory_path=./$_G_directory_path ;; esac # While some portion of DIR does not yet exist... while test ! -d "$_G_directory_path"; do # ...make a list in topmost first order. Use a colon delimited # list in case some portion of path contains whitespace. _G_dir_list=$_G_directory_path:$_G_dir_list # If the last portion added has no slash in it, the list is done case $_G_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"` done _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'` func_mkdir_p_IFS=$IFS; IFS=: for _G_dir in $_G_dir_list; do IFS=$func_mkdir_p_IFS # mkdir can fail with a 'File exist' error if two processes # try to create one of the directories concurrently. Don't # stop in that case! $MKDIR "$_G_dir" 2>/dev/null || : done IFS=$func_mkdir_p_IFS # Bail out if we (or some other process) failed to create a directory. test -d "$_G_directory_path" || \ func_fatal_error "Failed to create '$1'" fi } # func_mktempdir [BASENAME] # ------------------------- # Make a temporary directory that won't clash with other running # libtool processes, and avoids race conditions if possible. If # given, BASENAME is the basename for that directory. func_mktempdir () { $debug_cmd _G_template=${TMPDIR-/tmp}/${1-$progname} if test : = "$opt_dry_run"; then # Return a directory name, but don't create it in dry-run mode _G_tmpdir=$_G_template-$$ else # If mktemp works, use that first and foremost _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null` if test ! -d "$_G_tmpdir"; then # Failing that, at least try and use $RANDOM to avoid a race _G_tmpdir=$_G_template-${RANDOM-0}$$ func_mktempdir_umask=`umask` umask 0077 $MKDIR "$_G_tmpdir" umask $func_mktempdir_umask fi # If we're not in dry-run mode, bomb out on failure test -d "$_G_tmpdir" || \ func_fatal_error "cannot create temporary directory '$_G_tmpdir'" fi $ECHO "$_G_tmpdir" } # func_normal_abspath PATH # ------------------------ # Remove doubled-up and trailing slashes, "." path components, # and cancel out any ".." path components in PATH after making # it an absolute path. func_normal_abspath () { $debug_cmd # These SED scripts presuppose an absolute path with a trailing slash. _G_pathcar='s|^/\([^/]*\).*$|\1|' _G_pathcdr='s|^/[^/]*||' _G_removedotparts=':dotsl s|/\./|/|g t dotsl s|/\.$|/|' _G_collapseslashes='s|/\{1,\}|/|g' _G_finalslash='s|/*$|/|' # Start from root dir and reassemble the path. func_normal_abspath_result= func_normal_abspath_tpath=$1 func_normal_abspath_altnamespace= case $func_normal_abspath_tpath in "") # Empty path, that just means $cwd. func_stripname '' '/' "`pwd`" func_normal_abspath_result=$func_stripname_result return ;; # The next three entries are used to spot a run of precisely # two leading slashes without using negated character classes; # we take advantage of case's first-match behaviour. ///*) # Unusual form of absolute path, do nothing. ;; //*) # Not necessarily an ordinary path; POSIX reserves leading '//' # and for example Cygwin uses it to access remote file shares # over CIFS/SMB, so we conserve a leading double slash if found. func_normal_abspath_altnamespace=/ ;; /*) # Absolute path, do nothing. ;; *) # Relative path, prepend $cwd. func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath ;; esac # Cancel out all the simple stuff to save iterations. We also want # the path to end with a slash for ease of parsing, so make sure # there is one (and only one) here. func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"` while :; do # Processed it all yet? if test / = "$func_normal_abspath_tpath"; then # If we ascended to the root using ".." the result may be empty now. if test -z "$func_normal_abspath_result"; then func_normal_abspath_result=/ fi break fi func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$_G_pathcar"` func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$_G_pathcdr"` # Figure out what to do with it case $func_normal_abspath_tcomponent in "") # Trailing empty path component, ignore it. ;; ..) # Parent dir; strip last assembled component from result. func_dirname "$func_normal_abspath_result" func_normal_abspath_result=$func_dirname_result ;; *) # Actual path component, append it. func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent" ;; esac done # Restore leading double-slash if one was found on entry. func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result } # func_notquiet ARG... # -------------------- # Echo program name prefixed message only when not in quiet mode. func_notquiet () { $debug_cmd $opt_quiet || func_echo ${1+"$@"} # A bug in bash halts the script if the last line of a function # fails when set -e is in force, so we need another command to # work around that: : } # func_relative_path SRCDIR DSTDIR # -------------------------------- # Set func_relative_path_result to the relative path from SRCDIR to DSTDIR. func_relative_path () { $debug_cmd func_relative_path_result= func_normal_abspath "$1" func_relative_path_tlibdir=$func_normal_abspath_result func_normal_abspath "$2" func_relative_path_tbindir=$func_normal_abspath_result # Ascend the tree starting from libdir while :; do # check if we have found a prefix of bindir case $func_relative_path_tbindir in $func_relative_path_tlibdir) # found an exact match func_relative_path_tcancelled= break ;; $func_relative_path_tlibdir*) # found a matching prefix func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" func_relative_path_tcancelled=$func_stripname_result if test -z "$func_relative_path_result"; then func_relative_path_result=. fi break ;; *) func_dirname $func_relative_path_tlibdir func_relative_path_tlibdir=$func_dirname_result if test -z "$func_relative_path_tlibdir"; then # Have to descend all the way to the root! func_relative_path_result=../$func_relative_path_result func_relative_path_tcancelled=$func_relative_path_tbindir break fi func_relative_path_result=../$func_relative_path_result ;; esac done # Now calculate path; take care to avoid doubling-up slashes. func_stripname '' '/' "$func_relative_path_result" func_relative_path_result=$func_stripname_result func_stripname '/' '/' "$func_relative_path_tcancelled" if test -n "$func_stripname_result"; then func_append func_relative_path_result "/$func_stripname_result" fi # Normalisation. If bindir is libdir, return '.' else relative path. if test -n "$func_relative_path_result"; then func_stripname './' '' "$func_relative_path_result" func_relative_path_result=$func_stripname_result fi test -n "$func_relative_path_result" || func_relative_path_result=. : } # func_quote_portable EVAL ARG # ---------------------------- # Internal function to portably implement func_quote_arg. Note that we still # keep attention to performance here so we as much as possible try to avoid # calling sed binary (so far O(N) complexity as long as func_append is O(1)). func_quote_portable () { $debug_cmd $require_check_ifs_backslash func_quote_portable_result=$2 # one-time-loop (easy break) while true do if $1; then func_quote_portable_result=`$ECHO "$2" | $SED \ -e "$sed_double_quote_subst" -e "$sed_double_backslash"` break fi # Quote for eval. case $func_quote_portable_result in *[\\\`\"\$]*) # Fallback to sed for $func_check_bs_ifs_broken=:, or when the string # contains the shell wildcard characters. case $check_ifs_backshlash_broken$func_quote_portable_result in :*|*[\[\*\?]*) func_quote_portable_result=`$ECHO "$func_quote_portable_result" \ | $SED "$sed_quote_subst"` break ;; esac func_quote_portable_old_IFS=$IFS for _G_char in '\' '`' '"' '$' do # STATE($1) PREV($2) SEPARATOR($3) set start "" "" func_quote_portable_result=dummy"$_G_char$func_quote_portable_result$_G_char"dummy IFS=$_G_char for _G_part in $func_quote_portable_result do case $1 in quote) func_append func_quote_portable_result "$3$2" set quote "$_G_part" "\\$_G_char" ;; start) set first "" "" func_quote_portable_result= ;; first) set quote "$_G_part" "" ;; esac done done IFS=$func_quote_portable_old_IFS ;; *) ;; esac break done func_quote_portable_unquoted_result=$func_quote_portable_result case $func_quote_portable_result in # double-quote args containing shell metacharacters to delay # word splitting, command substitution and variable expansion # for a subsequent eval. # many bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") func_quote_portable_result=\"$func_quote_portable_result\" ;; esac } # func_quotefast_eval ARG # ----------------------- # Quote one ARG (internal). This is equivalent to 'func_quote_arg eval ARG', # but optimized for speed. Result is stored in $func_quotefast_eval. if test xyes = `(x=; printf -v x %q yes; echo x"$x") 2>/dev/null`; then printf -v _GL_test_printf_tilde %q '~' if test '\~' = "$_GL_test_printf_tilde"; then func_quotefast_eval () { printf -v func_quotefast_eval_result %q "$1" } else # Broken older Bash implementations. Make those faster too if possible. func_quotefast_eval () { case $1 in '~'*) func_quote_portable false "$1" func_quotefast_eval_result=$func_quote_portable_result ;; *) printf -v func_quotefast_eval_result %q "$1" ;; esac } fi else func_quotefast_eval () { func_quote_portable false "$1" func_quotefast_eval_result=$func_quote_portable_result } fi # func_quote_arg MODEs ARG # ------------------------ # Quote one ARG to be evaled later. MODEs argument may contain zero or more # specifiers listed below separated by ',' character. This function returns two # values: # i) func_quote_arg_result # double-quoted (when needed), suitable for a subsequent eval # ii) func_quote_arg_unquoted_result # has all characters that are still active within double # quotes backslashified. Available only if 'unquoted' is specified. # # Available modes: # ---------------- # 'eval' (default) # - escape shell special characters # 'expand' # - the same as 'eval'; but do not quote variable references # 'pretty' # - request aesthetic output, i.e. '"a b"' instead of 'a\ b'. This might # be used later in func_quote to get output like: 'echo "a b"' instead # of 'echo a\ b'. This is slower than default on some shells. # 'unquoted' # - produce also $func_quote_arg_unquoted_result which does not contain # wrapping double-quotes. # # Examples for 'func_quote_arg pretty,unquoted string': # # string | *_result | *_unquoted_result # ------------+-----------------------+------------------- # " | \" | \" # a b | "a b" | a b # "a b" | "\"a b\"" | \"a b\" # * | "*" | * # z="${x-$y}" | "z=\"\${x-\$y}\"" | z=\"\${x-\$y}\" # # Examples for 'func_quote_arg pretty,unquoted,expand string': # # string | *_result | *_unquoted_result # --------------+---------------------+-------------------- # z="${x-$y}" | "z=\"${x-$y}\"" | z=\"${x-$y}\" func_quote_arg () { _G_quote_expand=false case ,$1, in *,expand,*) _G_quote_expand=: ;; esac case ,$1, in *,pretty,*|*,expand,*|*,unquoted,*) func_quote_portable $_G_quote_expand "$2" func_quote_arg_result=$func_quote_portable_result func_quote_arg_unquoted_result=$func_quote_portable_unquoted_result ;; *) # Faster quote-for-eval for some shells. func_quotefast_eval "$2" func_quote_arg_result=$func_quotefast_eval_result ;; esac } # func_quote MODEs ARGs... # ------------------------ # Quote all ARGs to be evaled later and join them into single command. See # func_quote_arg's description for more info. func_quote () { $debug_cmd _G_func_quote_mode=$1 ; shift func_quote_result= while test 0 -lt $#; do func_quote_arg "$_G_func_quote_mode" "$1" if test -n "$func_quote_result"; then func_append func_quote_result " $func_quote_arg_result" else func_append func_quote_result "$func_quote_arg_result" fi shift done } # func_stripname PREFIX SUFFIX NAME # --------------------------------- # strip PREFIX and SUFFIX from NAME, and store in func_stripname_result. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). if test yes = "$_G_HAVE_XSI_OPS"; then eval 'func_stripname () { $debug_cmd # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are # positional parameters, so assign one to ordinary variable first. func_stripname_result=$3 func_stripname_result=${func_stripname_result#"$1"} func_stripname_result=${func_stripname_result%"$2"} }' else func_stripname () { $debug_cmd case $2 in .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;; *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;; esac } fi # func_show_eval CMD [FAIL_EXP] # ----------------------------- # Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. func_show_eval () { $debug_cmd _G_cmd=$1 _G_fail_exp=${2-':'} func_quote_arg pretty,expand "$_G_cmd" eval "func_notquiet $func_quote_arg_result" $opt_dry_run || { eval "$_G_cmd" _G_status=$? if test 0 -ne "$_G_status"; then eval "(exit $_G_status); $_G_fail_exp" fi } } # func_show_eval_locale CMD [FAIL_EXP] # ------------------------------------ # Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. Use the saved locale for evaluation. func_show_eval_locale () { $debug_cmd _G_cmd=$1 _G_fail_exp=${2-':'} $opt_quiet || { func_quote_arg expand,pretty "$_G_cmd" eval "func_echo $func_quote_arg_result" } $opt_dry_run || { eval "$_G_user_locale $_G_cmd" _G_status=$? eval "$_G_safe_locale" if test 0 -ne "$_G_status"; then eval "(exit $_G_status); $_G_fail_exp" fi } } # func_tr_sh # ---------- # Turn $1 into a string suitable for a shell variable name. # Result is stored in $func_tr_sh_result. All characters # not in the set a-zA-Z0-9_ are replaced with '_'. Further, # if $1 begins with a digit, a '_' is prepended as well. func_tr_sh () { $debug_cmd case $1 in [0-9]* | *[!a-zA-Z0-9_]*) func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'` ;; * ) func_tr_sh_result=$1 ;; esac } # func_verbose ARG... # ------------------- # Echo program name prefixed message in verbose mode only. func_verbose () { $debug_cmd $opt_verbose && func_echo "$*" : } # func_warn_and_continue ARG... # ----------------------------- # Echo program name prefixed warning message to standard error. func_warn_and_continue () { $debug_cmd $require_term_colors func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2 } # func_warning CATEGORY ARG... # ---------------------------- # Echo program name prefixed warning message to standard error. Warning # messages can be filtered according to CATEGORY, where this function # elides messages where CATEGORY is not listed in the global variable # 'opt_warning_types'. func_warning () { $debug_cmd # CATEGORY must be in the warning_categories list! case " $warning_categories " in *" $1 "*) ;; *) func_internal_error "invalid warning category '$1'" ;; esac _G_category=$1 shift case " $opt_warning_types " in *" $_G_category "*) $warning_func ${1+"$@"} ;; esac } # func_sort_ver VER1 VER2 # ----------------------- # 'sort -V' is not generally available. # Note this deviates from the version comparison in automake # in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a # but this should suffice as we won't be specifying old # version formats or redundant trailing .0 in bootstrap.conf. # If we did want full compatibility then we should probably # use m4_version_compare from autoconf. func_sort_ver () { $debug_cmd printf '%s\n%s\n' "$1" "$2" \ | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n } # func_lt_ver PREV CURR # --------------------- # Return true if PREV and CURR are in the correct order according to # func_sort_ver, otherwise false. Use it like this: # # func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..." func_lt_ver () { $debug_cmd test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q` } # Local variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" # time-stamp-time-zone: "UTC" # End: #! /bin/sh # A portable, pluggable option parser for Bourne shell. # Written by Gary V. Vaughan, 2010 # This is free software. There is NO warranty; not even for # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # # Copyright (C) 2010-2019, 2021, 2023-2024 Bootstrap Authors # # This file is dual licensed under the terms of the MIT license # , and GPL version 2 or later # . You must apply one of # these licenses when using or redistributing this software or any of # the files within it. See the URLs above, or the file `LICENSE` # included in the Bootstrap distribution for the full license texts. # Please report bugs or propose patches to: # # Set a version string for this script. scriptversion=2019-02-19.15; # UTC ## ------ ## ## Usage. ## ## ------ ## # This file is a library for parsing options in your shell scripts along # with assorted other useful supporting features that you can make use # of too. # # For the simplest scripts you might need only: # # #!/bin/sh # . relative/path/to/funclib.sh # . relative/path/to/options-parser # scriptversion=1.0 # func_options ${1+"$@"} # eval set dummy "$func_options_result"; shift # ...rest of your script... # # In order for the '--version' option to work, you will need to have a # suitably formatted comment like the one at the top of this file # starting with '# Written by ' and ending with '# Copyright'. # # For '-h' and '--help' to work, you will also need a one line # description of your script's purpose in a comment directly above the # '# Written by ' line, like the one at the top of this file. # # The default options also support '--debug', which will turn on shell # execution tracing (see the comment above debug_cmd below for another # use), and '--verbose' and the func_verbose function to allow your script # to display verbose messages only when your user has specified # '--verbose'. # # After sourcing this file, you can plug in processing for additional # options by amending the variables from the 'Configuration' section # below, and following the instructions in the 'Option parsing' # section further down. ## -------------- ## ## Configuration. ## ## -------------- ## # You should override these variables in your script after sourcing this # file so that they reflect the customisations you have added to the # option parser. # The usage line for option parsing errors and the start of '-h' and # '--help' output messages. You can embed shell variables for delayed # expansion at the time the message is displayed, but you will need to # quote other shell meta-characters carefully to prevent them being # expanded when the contents are evaled. usage='$progpath [OPTION]...' # Short help message in response to '-h' and '--help'. Add to this or # override it after sourcing this library to reflect the full set of # options your script accepts. usage_message="\ --debug enable verbose shell tracing -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all] -v, --verbose verbosely report processing --version print version information and exit -h, --help print short or long help message and exit " # Additional text appended to 'usage_message' in response to '--help'. long_help_message=" Warning categories include: 'all' show all warnings 'none' turn off all the warnings 'error' warnings are treated as fatal errors" # Help message printed before fatal option parsing errors. fatal_help="Try '\$progname --help' for more information." ## ------------------------- ## ## Hook function management. ## ## ------------------------- ## # This section contains functions for adding, removing, and running hooks # in the main code. A hook is just a list of function names that can be # run in order later on. # func_hookable FUNC_NAME # ----------------------- # Declare that FUNC_NAME will run hooks added with # 'func_add_hook FUNC_NAME ...'. func_hookable () { $debug_cmd func_append hookable_fns " $1" } # func_add_hook FUNC_NAME HOOK_FUNC # --------------------------------- # Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must # first have been declared "hookable" by a call to 'func_hookable'. func_add_hook () { $debug_cmd case " $hookable_fns " in *" $1 "*) ;; *) func_fatal_error "'$1' does not accept hook functions." ;; esac eval func_append ${1}_hooks '" $2"' } # func_remove_hook FUNC_NAME HOOK_FUNC # ------------------------------------ # Remove HOOK_FUNC from the list of hook functions to be called by # FUNC_NAME. func_remove_hook () { $debug_cmd eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`' } # func_propagate_result FUNC_NAME_A FUNC_NAME_B # --------------------------------------------- # If the *_result variable of FUNC_NAME_A _is set_, assign its value to # *_result variable of FUNC_NAME_B. func_propagate_result () { $debug_cmd func_propagate_result_result=: if eval "test \"\${${1}_result+set}\" = set" then eval "${2}_result=\$${1}_result" else func_propagate_result_result=false fi } # func_run_hooks FUNC_NAME [ARG]... # --------------------------------- # Run all hook functions registered to FUNC_NAME. # It's assumed that the list of hook functions contains nothing more # than a whitespace-delimited list of legal shell function names, and # no effort is wasted trying to catch shell meta-characters or preserve # whitespace. func_run_hooks () { $debug_cmd case " $hookable_fns " in *" $1 "*) ;; *) func_fatal_error "'$1' does not support hook functions." ;; esac eval _G_hook_fns=\$$1_hooks; shift for _G_hook in $_G_hook_fns; do func_unset "${_G_hook}_result" eval $_G_hook '${1+"$@"}' func_propagate_result $_G_hook func_run_hooks if $func_propagate_result_result; then eval set dummy "$func_run_hooks_result"; shift fi done } ## --------------- ## ## Option parsing. ## ## --------------- ## # In order to add your own option parsing hooks, you must accept the # full positional parameter list from your hook function. You may remove # or edit any options that you action, and then pass back the remaining # unprocessed options in '_result', escaped # suitably for 'eval'. # # The '_result' variable is automatically unset # before your hook gets called; for best performance, only set the # *_result variable when necessary (i.e. don't call the 'func_quote' # function unnecessarily because it can be an expensive operation on some # machines). # # Like this: # # my_options_prep () # { # $debug_cmd # # # Extend the existing usage message. # usage_message=$usage_message' # -s, --silent don'\''t print informational messages # ' # # No change in '$@' (ignored completely by this hook). Leave # # my_options_prep_result variable intact. # } # func_add_hook func_options_prep my_options_prep # # # my_silent_option () # { # $debug_cmd # # args_changed=false # # # Note that, for efficiency, we parse as many options as we can # # recognise in a loop before passing the remainder back to the # # caller on the first unrecognised argument we encounter. # while test $# -gt 0; do # opt=$1; shift # case $opt in # --silent|-s) opt_silent=: # args_changed=: # ;; # # Separate non-argument short options: # -s*) func_split_short_opt "$_G_opt" # set dummy "$func_split_short_opt_name" \ # "-$func_split_short_opt_arg" ${1+"$@"} # shift # args_changed=: # ;; # *) # Make sure the first unrecognised option "$_G_opt" # # is added back to "$@" in case we need it later, # # if $args_changed was set to 'true'. # set dummy "$_G_opt" ${1+"$@"}; shift; break ;; # esac # done # # # Only call 'func_quote' here if we processed at least one argument. # if $args_changed; then # func_quote eval ${1+"$@"} # my_silent_option_result=$func_quote_result # fi # } # func_add_hook func_parse_options my_silent_option # # # my_option_validation () # { # $debug_cmd # # $opt_silent && $opt_verbose && func_fatal_help "\ # '--silent' and '--verbose' options are mutually exclusive." # } # func_add_hook func_validate_options my_option_validation # # You'll also need to manually amend $usage_message to reflect the extra # options you parse. It's preferable to append if you can, so that # multiple option parsing hooks can be added safely. # func_options_finish [ARG]... # ---------------------------- # Finishing the option parse loop (call 'func_options' hooks ATM). func_options_finish () { $debug_cmd func_run_hooks func_options ${1+"$@"} func_propagate_result func_run_hooks func_options_finish } # func_options [ARG]... # --------------------- # All the functions called inside func_options are hookable. See the # individual implementations for details. func_hookable func_options func_options () { $debug_cmd _G_options_quoted=false for my_func in options_prep parse_options validate_options options_finish do func_unset func_${my_func}_result func_unset func_run_hooks_result eval func_$my_func '${1+"$@"}' func_propagate_result func_$my_func func_options if $func_propagate_result_result; then eval set dummy "$func_options_result"; shift _G_options_quoted=: fi done $_G_options_quoted || { # As we (func_options) are top-level options-parser function and # nobody quoted "$@" for us yet, we need to do it explicitly for # caller. func_quote eval ${1+"$@"} func_options_result=$func_quote_result } } # func_options_prep [ARG]... # -------------------------- # All initialisations required before starting the option parse loop. # Note that when calling hook functions, we pass through the list of # positional parameters. If a hook function modifies that list, and # needs to propagate that back to rest of this script, then the complete # modified list must be put in 'func_run_hooks_result' before returning. func_hookable func_options_prep func_options_prep () { $debug_cmd # Option defaults: opt_verbose=false opt_warning_types= func_run_hooks func_options_prep ${1+"$@"} func_propagate_result func_run_hooks func_options_prep } # func_parse_options [ARG]... # --------------------------- # The main option parsing loop. func_hookable func_parse_options func_parse_options () { $debug_cmd _G_parse_options_requote=false # this just eases exit handling while test $# -gt 0; do # Defer to hook functions for initial option parsing, so they # get priority in the event of reusing an option name. func_run_hooks func_parse_options ${1+"$@"} func_propagate_result func_run_hooks func_parse_options if $func_propagate_result_result; then eval set dummy "$func_parse_options_result"; shift # Even though we may have changed "$@", we passed the "$@" array # down into the hook and it quoted it for us (because we are in # this if-branch). No need to quote it again. _G_parse_options_requote=false fi # Break out of the loop if we already parsed every option. test $# -gt 0 || break # We expect that one of the options parsed in this function matches # and thus we remove _G_opt from "$@" and need to re-quote. _G_match_parse_options=: _G_opt=$1 shift case $_G_opt in --debug|-x) debug_cmd='set -x' func_echo "enabling shell trace mode" >&2 $debug_cmd ;; --no-warnings|--no-warning|--no-warn) set dummy --warnings none ${1+"$@"} shift ;; --warnings|--warning|-W) if test $# = 0 && func_missing_arg $_G_opt; then _G_parse_options_requote=: break fi case " $warning_categories $1" in *" $1 "*) # trailing space prevents matching last $1 above func_append_uniq opt_warning_types " $1" ;; *all) opt_warning_types=$warning_categories ;; *none) opt_warning_types=none warning_func=: ;; *error) opt_warning_types=$warning_categories warning_func=func_fatal_error ;; *) func_fatal_error \ "unsupported warning category: '$1'" ;; esac shift ;; --verbose|-v) opt_verbose=: ;; --version) func_version ;; -\?|-h) func_usage ;; --help) func_help ;; # Separate optargs to long options (plugins may need this): --*=*) func_split_equals "$_G_opt" set dummy "$func_split_equals_lhs" \ "$func_split_equals_rhs" ${1+"$@"} shift ;; # Separate optargs to short options: -W*) func_split_short_opt "$_G_opt" set dummy "$func_split_short_opt_name" \ "$func_split_short_opt_arg" ${1+"$@"} shift ;; # Separate non-argument short options: -\?*|-h*|-v*|-x*) func_split_short_opt "$_G_opt" set dummy "$func_split_short_opt_name" \ "-$func_split_short_opt_arg" ${1+"$@"} shift ;; --) _G_parse_options_requote=: ; break ;; -*) func_fatal_help "unrecognised option: '$_G_opt'" ;; *) set dummy "$_G_opt" ${1+"$@"}; shift _G_match_parse_options=false break ;; esac if $_G_match_parse_options; then _G_parse_options_requote=: fi done if $_G_parse_options_requote; then # save modified positional parameters for caller func_quote eval ${1+"$@"} func_parse_options_result=$func_quote_result fi } # func_validate_options [ARG]... # ------------------------------ # Perform any sanity checks on option settings and/or unconsumed # arguments. func_hookable func_validate_options func_validate_options () { $debug_cmd # Display all warnings if -W was not given. test -n "$opt_warning_types" || opt_warning_types=" $warning_categories" func_run_hooks func_validate_options ${1+"$@"} func_propagate_result func_run_hooks func_validate_options # Bail if the options were screwed! $exit_cmd $EXIT_FAILURE } ## ----------------- ## ## Helper functions. ## ## ----------------- ## # This section contains the helper functions used by the rest of the # hookable option parser framework in ascii-betical order. # func_fatal_help ARG... # ---------------------- # Echo program name prefixed message to standard error, followed by # a help hint, and exit. func_fatal_help () { $debug_cmd eval \$ECHO \""Usage: $usage"\" eval \$ECHO \""$fatal_help"\" func_error ${1+"$@"} exit $EXIT_FAILURE } # func_help # --------- # Echo long help message to standard output and exit. func_help () { $debug_cmd func_usage_message $ECHO "$long_help_message" exit 0 } # func_missing_arg ARGNAME # ------------------------ # Echo program name prefixed message to standard error and set global # exit_cmd. func_missing_arg () { $debug_cmd func_error "Missing argument for '$1'." exit_cmd=exit } # func_split_equals STRING # ------------------------ # Set func_split_equals_lhs and func_split_equals_rhs shell variables # after splitting STRING at the '=' sign. test -z "$_G_HAVE_XSI_OPS" \ && (eval 'x=a/b/c; test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ && _G_HAVE_XSI_OPS=yes if test yes = "$_G_HAVE_XSI_OPS" then # This is an XSI compatible shell, allowing a faster implementation... eval 'func_split_equals () { $debug_cmd func_split_equals_lhs=${1%%=*} func_split_equals_rhs=${1#*=} if test "x$func_split_equals_lhs" = "x$1"; then func_split_equals_rhs= fi }' else # ...otherwise fall back to using expr, which is often a shell builtin. func_split_equals () { $debug_cmd func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'` func_split_equals_rhs= test "x$func_split_equals_lhs=" = "x$1" \ || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'` } fi #func_split_equals # func_split_short_opt SHORTOPT # ----------------------------- # Set func_split_short_opt_name and func_split_short_opt_arg shell # variables after splitting SHORTOPT after the 2nd character. if test yes = "$_G_HAVE_XSI_OPS" then # This is an XSI compatible shell, allowing a faster implementation... eval 'func_split_short_opt () { $debug_cmd func_split_short_opt_arg=${1#??} func_split_short_opt_name=${1%"$func_split_short_opt_arg"} }' else # ...otherwise fall back to using expr, which is often a shell builtin. func_split_short_opt () { $debug_cmd func_split_short_opt_name=`expr "x$1" : 'x\(-.\)'` func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'` } fi #func_split_short_opt # func_usage # ---------- # Echo short help message to standard output and exit. func_usage () { $debug_cmd func_usage_message $ECHO "Run '$progname --help |${PAGER-more}' for full usage" exit 0 } # func_usage_message # ------------------ # Echo short help message to standard output. func_usage_message () { $debug_cmd eval \$ECHO \""Usage: $usage"\" echo $SED -n 's|^# || /^Written by/{ x;p;x } h /^Written by/q' < "$progpath" echo eval \$ECHO \""$usage_message"\" } # func_version # ------------ # Echo version message to standard output and exit. # The version message is extracted from the calling file's header # comments, with leading '# ' stripped: # 1. First display the progname and version # 2. Followed by the header comment line matching /^# Written by / # 3. Then a blank line followed by the first following line matching # /^# Copyright / # 4. Immediately followed by any lines between the previous matches, # except lines preceding the intervening completely blank line. # For example, see the header comments of this file. func_version () { $debug_cmd printf '%s\n' "$progname $scriptversion" $SED -n ' /^# Written by /!b s|^# ||; p; n :fwd2blnk /./ { n b fwd2blnk } p; n :holdwrnt s|^# || s|^# *$|| /^Copyright /!{ /./H n b holdwrnt } s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2| G s|\(\n\)\n*|\1|g p; q' < "$progpath" exit $? } # Local variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-pattern: "30/scriptversion=%:y-%02m-%02d.%02H; # UTC" # time-stamp-time-zone: "UTC" # End: # Set a version string. scriptversion='(GNU libtool) 2.5.4' # func_version # ------------ # Echo version message to standard output and exit. func_version () { $debug_cmd year=`date +%Y` cat < This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Originally written by Gordon Matzigkeit, 1996 (See AUTHORS for complete contributor listing) EOF exit $? } # func_echo ARG... # ---------------- # Libtool also displays the current mode in messages, so override # funclib.sh func_echo with this custom definition. func_echo () { $debug_cmd _G_message=$* func_echo_IFS=$IFS IFS=$nl for _G_line in $_G_message; do IFS=$func_echo_IFS $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line" done IFS=$func_echo_IFS } ## ---------------- ## ## Options parsing. ## ## ---------------- ## # Hook in the functions to make sure our own options are parsed during # the option parsing loop. usage='$progpath [OPTION]... [MODE-ARG]...' # Short help message in response to '-h'. usage_message="Options: --config show all configuration variables --debug enable verbose shell tracing -n, --dry-run display commands without modifying any files --features display basic configuration information --finish use operation '--mode=finish' --mode=MODE use operation mode MODE --no-finish don't update shared library cache --no-quiet, --no-silent print default informational messages --no-warnings equivalent to '-Wnone' --preserve-dup-deps don't remove duplicate dependency libraries --quiet, --silent don't print informational messages --reorder-cache=DIRS reorder shared library cache for preferred DIRS --tag=TAG use configuration variables from tag TAG -v, --verbose print more informational messages than default --version print version information -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all] -h, --help, --help-all print short, long, or detailed help message " # Additional text appended to 'usage_message' in response to '--help'. func_help () { $debug_cmd func_usage_message $ECHO "$long_help_message MODE must be one of the following: clean remove files from the build directory compile compile a source file into a libtool object execute automatically set library path, then run a program finish complete the installation of libtool libraries install install libraries or executables link create a library or an executable uninstall remove libraries from an installed directory MODE-ARGS vary depending on the MODE. When passed as first option, '--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that. Try '$progname --help --mode=MODE' for a more detailed description of MODE. When reporting a bug, please describe a test case to reproduce it and include the following information: host-triplet: $host shell: $SHELL compiler: $LTCC compiler flags: $LTCFLAGS linker: $LD (gnu? $with_gnu_ld) version: $progname $scriptversion automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q` autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q` Report bugs to . GNU libtool home page: . General help using GNU software: ." exit 0 } # func_lo2o OBJECT-NAME # --------------------- # Transform OBJECT-NAME from a '.lo' suffix to the platform specific # object suffix. lo2o=s/\\.lo\$/.$objext/ o2lo=s/\\.$objext\$/.lo/ if test yes = "$_G_HAVE_XSI_OPS"; then eval 'func_lo2o () { case $1 in *.lo) func_lo2o_result=${1%.lo}.$objext ;; * ) func_lo2o_result=$1 ;; esac }' # func_xform LIBOBJ-OR-SOURCE # --------------------------- # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise) # suffix to a '.lo' libtool-object suffix. eval 'func_xform () { func_xform_result=${1%.*}.lo }' else # ...otherwise fall back to using sed. func_lo2o () { func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"` } func_xform () { func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'` } fi # func_fatal_configuration ARG... # ------------------------------- # Echo program name prefixed message to standard error, followed by # a configuration failure hint, and exit. func_fatal_configuration () { func_fatal_error ${1+"$@"} \ "See the $PACKAGE documentation for more information." \ "Fatal configuration error." } # func_config # ----------- # Display the configuration for all the tags in this script. func_config () { re_begincf='^# ### BEGIN LIBTOOL' re_endcf='^# ### END LIBTOOL' # Default configuration. $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" # Now print the configurations for the tags. for tagname in $taglist; do $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" done exit $? } # func_features # ------------- # Display the features supported by this script. func_features () { echo "host: $host" if test yes = "$build_libtool_libs"; then echo "enable shared libraries" else echo "disable shared libraries" fi if test yes = "$build_old_libs"; then echo "enable static libraries" else echo "disable static libraries" fi exit $? } # func_enable_tag TAGNAME # ----------------------- # Verify that TAGNAME is valid, and either flag an error and exit, or # enable the TAGNAME tag. We also add TAGNAME to the global $taglist # variable here. func_enable_tag () { # Global variable: tagname=$1 re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" sed_extractcf=/$re_begincf/,/$re_endcf/p # Validate tagname. case $tagname in *[!-_A-Za-z0-9,/]*) func_fatal_error "invalid tag name: $tagname" ;; esac # Don't test for the "default" C tag, as we know it's # there but not specially marked. case $tagname in CC) ;; *) if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then taglist="$taglist $tagname" # Evaluate the configuration. Be careful to quote the path # and the sed script, to avoid splitting on whitespace, but # also don't use non-portable quotes within backquotes within # quotes we have to do it in 2 steps: extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` eval "$extractedcf" else func_error "ignoring unknown tag $tagname" fi ;; esac } # func_check_version_match # ------------------------ # Ensure that we are using m4 macros, and libtool script from the same # release of libtool. func_check_version_match () { if test "$package_revision" != "$macro_revision"; then if test "$VERSION" != "$macro_version"; then if test -z "$macro_version"; then cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from an older release. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from $PACKAGE $macro_version. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF fi else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, $progname: but the definition of this LT_INIT comes from revision $macro_revision. $progname: You should recreate aclocal.m4 with macros from revision $package_revision $progname: of $PACKAGE $VERSION and run autoconf again. _LT_EOF fi exit $EXIT_MISMATCH fi } # libtool_options_prep [ARG]... # ----------------------------- # Preparation for options parsed by libtool. libtool_options_prep () { $debug_mode # Option defaults: opt_config=false opt_dlopen= opt_dry_run=false opt_help=false opt_mode= opt_reorder_cache=false opt_preserve_dup_deps=false opt_quiet=false opt_finishing=true opt_warning= nonopt= preserve_args= _G_rc_lt_options_prep=: # Shorthand for --mode=foo, only valid as the first argument case $1 in clean|clea|cle|cl) shift; set dummy --mode clean ${1+"$@"}; shift ;; compile|compil|compi|comp|com|co|c) shift; set dummy --mode compile ${1+"$@"}; shift ;; execute|execut|execu|exec|exe|ex|e) shift; set dummy --mode execute ${1+"$@"}; shift ;; finish|finis|fini|fin|fi|f) shift; set dummy --mode finish ${1+"$@"}; shift ;; install|instal|insta|inst|ins|in|i) shift; set dummy --mode install ${1+"$@"}; shift ;; link|lin|li|l) shift; set dummy --mode link ${1+"$@"}; shift ;; uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) shift; set dummy --mode uninstall ${1+"$@"}; shift ;; *) _G_rc_lt_options_prep=false ;; esac if $_G_rc_lt_options_prep; then # Pass back the list of options. func_quote eval ${1+"$@"} libtool_options_prep_result=$func_quote_result fi } func_add_hook func_options_prep libtool_options_prep # libtool_parse_options [ARG]... # --------------------------------- # Provide handling for libtool specific options. libtool_parse_options () { $debug_cmd _G_rc_lt_parse_options=false # Perform our own loop to consume as many options as possible in # each iteration. while test $# -gt 0; do _G_match_lt_parse_options=: _G_opt=$1 shift case $_G_opt in --dry-run|--dryrun|-n) opt_dry_run=: ;; --config) func_config ;; --dlopen|-dlopen) opt_dlopen="${opt_dlopen+$opt_dlopen }$1" shift ;; --preserve-dup-deps) opt_preserve_dup_deps=: ;; --features) func_features ;; --finish) set dummy --mode finish ${1+"$@"}; shift ;; --help) opt_help=: ;; --help-all) opt_help=': help-all' ;; --mode) test $# = 0 && func_missing_arg $_G_opt && break opt_mode=$1 case $1 in # Valid mode arguments: clean|compile|execute|finish|install|link|relink|uninstall) ;; # Catch anything else as an error *) func_error "invalid argument '$1' for $_G_opt" exit_cmd=exit ;; esac shift ;; --no-finish) opt_finishing=false func_append preserve_args " $_G_opt" ;; --no-silent|--no-quiet) opt_quiet=false func_append preserve_args " $_G_opt" ;; --no-warnings|--no-warning|--no-warn) opt_warning=false func_append preserve_args " $_G_opt" ;; --no-verbose) opt_verbose=false func_append preserve_args " $_G_opt" ;; --reorder-cache) opt_reorder_cache=true shared_lib_dirs=$1 if test -n "$shared_lib_dirs"; then case $1 in # Must begin with /: /*) ;; # Catch anything else as an error (relative paths) *) func_error "invalid argument '$1' for $_G_opt" func_error "absolute paths are required for $_G_opt" exit_cmd=exit ;; esac fi shift ;; --silent|--quiet) opt_quiet=: opt_verbose=false func_append preserve_args " $_G_opt" ;; --tag) test $# = 0 && func_missing_arg $_G_opt && break opt_tag=$1 func_append preserve_args " $_G_opt $1" func_enable_tag "$1" shift ;; --verbose|-v) opt_quiet=false opt_verbose=: func_append preserve_args " $_G_opt" ;; # An option not handled by this hook function: *) set dummy "$_G_opt" ${1+"$@"} ; shift _G_match_lt_parse_options=false break ;; esac $_G_match_lt_parse_options && _G_rc_lt_parse_options=: done if $_G_rc_lt_parse_options; then # save modified positional parameters for caller func_quote eval ${1+"$@"} libtool_parse_options_result=$func_quote_result fi } func_add_hook func_parse_options libtool_parse_options # func_warning ARG... # ------------------- # Libtool warnings are not categorized, so override funclib.sh # func_warning with this simpler definition. func_warning () { if $opt_warning; then $debug_cmd $warning_func ${1+"$@"} fi } # libtool_validate_options [ARG]... # --------------------------------- # Perform any sanity checks on option settings and/or unconsumed # arguments. libtool_validate_options () { # save first non-option argument if test 0 -lt $#; then nonopt=$1 shift fi # preserve --debug test : = "$debug_cmd" || func_append preserve_args " --debug" case $host_os in # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452 # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788 cygwin* | mingw* | windows* | pw32* | cegcc* | solaris2* | os2*) # don't eliminate duplications in $postdeps and $predeps opt_duplicate_compiler_generated_deps=: ;; *) opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps ;; esac $opt_help || { # Sanity checks first: func_check_version_match test yes != "$build_libtool_libs" \ && test yes != "$build_old_libs" \ && func_fatal_configuration "not configured to build any kind of library" # Darwin sucks eval std_shrext=\"$shrext_cmds\" # Only execute mode is allowed to have -dlopen flags. if test -n "$opt_dlopen" && test execute != "$opt_mode"; then func_error "unrecognized option '-dlopen'" $ECHO "$help" 1>&2 exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. generic_help=$help help="Try '$progname --help --mode=$opt_mode' for more information." } # Pass back the unparsed argument list func_quote eval ${1+"$@"} libtool_validate_options_result=$func_quote_result } func_add_hook func_validate_options libtool_validate_options # Process options as early as possible so that --help and --version # can return quickly. func_options ${1+"$@"} eval set dummy "$func_options_result"; shift ## ----------- ## ## Main. ## ## ----------- ## magic='%%%MAGIC variable%%%' magic_exe='%%%MAGIC EXE variable%%%' # Global variables. extracted_archives= extracted_serial=0 # If this variable is set in any of the actions, the command in it # will be execed at the end. This prevents here-documents from being # left over by shells. exec_cmd= # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } # func_generated_by_libtool # True iff stdin has been generated by Libtool. This function is only # a basic sanity check; it will hardly flush out determined imposters. func_generated_by_libtool_p () { $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 } # func_lalib_p file # True iff FILE is a libtool '.la' library or '.lo' object file. # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_lalib_p () { test -f "$1" && $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p } # func_lalib_unsafe_p file # True iff FILE is a libtool '.la' library or '.lo' object file. # This function implements the same check as func_lalib_p without # resorting to external programs. To this end, it redirects stdin and # closes it afterwards, without saving the original file descriptor. # As a safety measure, use it only where a negative result would be # fatal anyway. Works if 'file' does not exist. func_lalib_unsafe_p () { lalib_p=no if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then for lalib_p_l in 1 2 3 4 do read lalib_p_line case $lalib_p_line in \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; esac done exec 0<&5 5<&- fi test yes = "$lalib_p" } # func_ltwrapper_script_p file # True iff FILE is a libtool wrapper script # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_script_p () { test -f "$1" && $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p } # func_ltwrapper_executable_p file # True iff FILE is a libtool wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_executable_p () { func_ltwrapper_exec_suffix= case $1 in *.exe) ;; *) func_ltwrapper_exec_suffix=.exe ;; esac $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 } # func_ltwrapper_scriptname file # Assumes file is an ltwrapper_executable # uses $file to determine the appropriate filename for a # temporary ltwrapper_script. func_ltwrapper_scriptname () { func_dirname_and_basename "$1" "" "." func_stripname '' '.exe' "$func_basename_result" func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper } # func_ltwrapper_p file # True iff FILE is a libtool wrapper script or wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_p () { func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" } # func_execute_cmds commands fail_cmd # Execute tilde-delimited COMMANDS. # If FAIL_CMD is given, eval that upon failure. # FAIL_CMD may read-access the current command in variable CMD! func_execute_cmds () { $debug_cmd save_ifs=$IFS; IFS='~' for cmd in $1; do IFS=$sp$nl eval cmd=\"$cmd\" IFS=$save_ifs func_show_eval "$cmd" "${2-:}" done IFS=$save_ifs } # func_source file # Source FILE, adding directory component if necessary. # Note that it is not necessary on cygwin/mingw to append a dot to # FILE even if both FILE and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing # 'FILE.' does not work on cygwin managed mounts. func_source () { $debug_cmd case $1 in */* | *\\*) . "$1" ;; *) . "./$1" ;; esac } # func_resolve_sysroot PATH # Replace a leading = in PATH with a sysroot. Store the result into # func_resolve_sysroot_result func_resolve_sysroot () { func_resolve_sysroot_result=$1 case $func_resolve_sysroot_result in =*) func_stripname '=' '' "$func_resolve_sysroot_result" func_resolve_sysroot_result=$lt_sysroot$func_stripname_result ;; esac } # func_replace_sysroot PATH # If PATH begins with the sysroot, replace it with = and # store the result into func_replace_sysroot_result. func_replace_sysroot () { case $lt_sysroot:$1 in ?*:"$lt_sysroot"*) func_stripname "$lt_sysroot" '' "$1" func_replace_sysroot_result='='$func_stripname_result ;; *) # Including no sysroot. func_replace_sysroot_result=$1 ;; esac } # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. # Only attempt this if the compiler in the base compile # command doesn't match the default compiler. # arg is usually of the form 'gcc ...' func_infer_tag () { $debug_cmd if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) for z in $available_tags; do if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case "$@ " in " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. tagname=$z break ;; esac fi done # If $tagname still isn't set, then no tagged configuration # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then func_echo "unable to infer tagged configuration" func_fatal_error "specify a tag with '--tag'" # else # func_verbose "using $tagname tagged configuration" fi ;; esac fi } # func_write_libtool_object output_name pic_name nonpic_name # Create a libtool object file (analogous to a ".la" file), # but don't create it if we're doing a dry run. func_write_libtool_object () { write_libobj=$1 if test yes = "$build_libtool_libs"; then write_lobj=\'$2\' else write_lobj=none fi if test yes = "$build_old_libs"; then write_oldobj=\'$3\' else write_oldobj=none fi $opt_dry_run || { cat >${write_libobj}T </dev/null` if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | $SED -e "$sed_naive_backslashify"` else func_convert_core_file_wine_to_w32_result= fi fi } # end: func_convert_core_file_wine_to_w32 # func_convert_core_path_wine_to_w32 ARG # Helper function used by path conversion functions when $build is *nix, and # $host is mingw, windows, cygwin, or some other w32 environment. Relies on a # correctly configured wine environment available, with the winepath program # in $build's $PATH. Assumes ARG has no leading or trailing path separator # characters. # # ARG is path to be converted from $build format to win32. # Result is available in $func_convert_core_path_wine_to_w32_result. # Unconvertible file (directory) names in ARG are skipped; if no directory names # are convertible, then the result may be empty. func_convert_core_path_wine_to_w32 () { $debug_cmd # unfortunately, winepath doesn't convert paths, only file names func_convert_core_path_wine_to_w32_result= if test -n "$1"; then oldIFS=$IFS IFS=: for func_convert_core_path_wine_to_w32_f in $1; do IFS=$oldIFS func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" if test -n "$func_convert_core_file_wine_to_w32_result"; then if test -z "$func_convert_core_path_wine_to_w32_result"; then func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result else func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" fi fi done IFS=$oldIFS fi } # end: func_convert_core_path_wine_to_w32 # func_cygpath ARGS... # Wrapper around calling the cygpath program via LT_CYGPATH. This is used when # when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) # $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or # (2), returns the Cygwin file name or path in func_cygpath_result (input # file name or path is assumed to be in w32 format, as previously converted # from $build's *nix or MSYS format). In case (3), returns the w32 file name # or path in func_cygpath_result (input file name or path is assumed to be in # Cygwin format). Returns an empty string on error. # # ARGS are passed to cygpath, with the last one being the file name or path to # be converted. # # Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH # environment variable; do not put it in $PATH. func_cygpath () { $debug_cmd if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` if test "$?" -ne 0; then # on failure, ensure result is empty func_cygpath_result= fi else func_cygpath_result= func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'" fi } #end: func_cygpath # func_convert_core_msys_to_w32 ARG # Convert file name or path ARG from MSYS format to w32 format. Return # result in func_convert_core_msys_to_w32_result. func_convert_core_msys_to_w32 () { $debug_cmd # awkward: cmd appends spaces to result func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"` } #end: func_convert_core_msys_to_w32 # func_convert_file_check ARG1 ARG2 # Verify that ARG1 (a file name in $build format) was converted to $host # format in ARG2. Otherwise, emit an error message, but continue (resetting # func_to_host_file_result to ARG1). func_convert_file_check () { $debug_cmd if test -z "$2" && test -n "$1"; then func_error "Could not determine host file name corresponding to" func_error " '$1'" func_error "Continuing, but uninstalled executables may not work." # Fallback: func_to_host_file_result=$1 fi } # end func_convert_file_check # func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH # Verify that FROM_PATH (a path in $build format) was converted to $host # format in TO_PATH. Otherwise, emit an error message, but continue, resetting # func_to_host_file_result to a simplistic fallback value (see below). func_convert_path_check () { $debug_cmd if test -z "$4" && test -n "$3"; then func_error "Could not determine the host path corresponding to" func_error " '$3'" func_error "Continuing, but uninstalled executables may not work." # Fallback. This is a deliberately simplistic "conversion" and # should not be "improved". See libtool.info. if test "x$1" != "x$2"; then lt_replace_pathsep_chars="s|$1|$2|g" func_to_host_path_result=`echo "$3" | $SED -e "$lt_replace_pathsep_chars"` else func_to_host_path_result=$3 fi fi } # end func_convert_path_check # func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG # Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT # and appending REPL if ORIG matches BACKPAT. func_convert_path_front_back_pathsep () { $debug_cmd case $4 in $1 ) func_to_host_path_result=$3$func_to_host_path_result ;; esac case $4 in $2 ) func_append func_to_host_path_result "$3" ;; esac } # end func_convert_path_front_back_pathsep # func_convert_delimited_path PATH ORIG_DELIMITER NEW_DELIMITER # Replaces a delimiter for a given path. func_convert_delimited_path () { converted_path=`$ECHO "$1" | $SED "s#$2#$3#g"` } # end func_convert_delimited_path ################################################## # $build to $host FILE NAME CONVERSION FUNCTIONS # ################################################## # invoked via '$to_host_file_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # Result will be available in $func_to_host_file_result. # func_to_host_file ARG # Converts the file name ARG from $build format to $host format. Return result # in func_to_host_file_result. func_to_host_file () { $debug_cmd $to_host_file_cmd "$1" } # end func_to_host_file # func_to_tool_file ARG LAZY # converts the file name ARG from $build format to toolchain format. Return # result in func_to_tool_file_result. If the conversion in use is listed # in (the comma separated) LAZY, no conversion takes place. func_to_tool_file () { $debug_cmd case ,$2, in *,"$to_tool_file_cmd",*) func_to_tool_file_result=$1 ;; *) $to_tool_file_cmd "$1" func_to_tool_file_result=$func_to_host_file_result ;; esac } # end func_to_tool_file # func_convert_file_noop ARG # Copy ARG to func_to_host_file_result. func_convert_file_noop () { func_to_host_file_result=$1 } # end func_convert_file_noop # func_convert_file_msys_to_w32 ARG # Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_file_result. func_convert_file_msys_to_w32 () { $debug_cmd func_to_host_file_result=$1 if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_to_host_file_result=$func_convert_core_msys_to_w32_result fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_w32 # func_convert_file_cygwin_to_w32 ARG # Convert file name ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_file_cygwin_to_w32 () { $debug_cmd func_to_host_file_result=$1 if test -n "$1"; then # because $build is cygwin, we call "the" cygpath in $PATH; no need to use # LT_CYGPATH in this case. func_to_host_file_result=`cygpath -m "$1"` fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_cygwin_to_w32 # func_convert_file_nix_to_w32 ARG # Convert file name ARG from *nix to w32 format. Requires a wine environment # and a working winepath. Returns result in func_to_host_file_result. func_convert_file_nix_to_w32 () { $debug_cmd func_to_host_file_result=$1 if test -n "$1"; then func_convert_core_file_wine_to_w32 "$1" func_to_host_file_result=$func_convert_core_file_wine_to_w32_result fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_w32 # func_convert_file_msys_to_cygwin ARG # Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_file_msys_to_cygwin () { $debug_cmd func_to_host_file_result=$1 if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_cygpath -u "$func_convert_core_msys_to_w32_result" func_to_host_file_result=$func_cygpath_result fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_cygwin # func_convert_file_nix_to_cygwin ARG # Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed # in a wine environment, working winepath, and LT_CYGPATH set. Returns result # in func_to_host_file_result. func_convert_file_nix_to_cygwin () { $debug_cmd func_to_host_file_result=$1 if test -n "$1"; then # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. func_convert_core_file_wine_to_w32 "$1" func_cygpath -u "$func_convert_core_file_wine_to_w32_result" func_to_host_file_result=$func_cygpath_result fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_cygwin ############################################# # $build to $host PATH CONVERSION FUNCTIONS # ############################################# # invoked via '$to_host_path_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # The result will be available in $func_to_host_path_result. # # Path separators are also converted from $build format to $host format. If # ARG begins or ends with a path separator character, it is preserved (but # converted to $host format) on output. # # All path conversion functions are named using the following convention: # file name conversion function : func_convert_file_X_to_Y () # path conversion function : func_convert_path_X_to_Y () # where, for any given $build/$host combination the 'X_to_Y' value is the # same. If conversion functions are added for new $build/$host combinations, # the two new functions must follow this pattern, or func_init_to_host_path_cmd # will break. # func_init_to_host_path_cmd # Ensures that function "pointer" variable $to_host_path_cmd is set to the # appropriate value, based on the value of $to_host_file_cmd. to_host_path_cmd= func_init_to_host_path_cmd () { $debug_cmd if test -z "$to_host_path_cmd"; then func_stripname 'func_convert_file_' '' "$to_host_file_cmd" to_host_path_cmd=func_convert_path_$func_stripname_result fi } # func_to_host_path ARG # Converts the path ARG from $build format to $host format. Return result # in func_to_host_path_result. func_to_host_path () { $debug_cmd func_init_to_host_path_cmd $to_host_path_cmd "$1" } # end func_to_host_path # func_convert_path_noop ARG # Copy ARG to func_to_host_path_result. func_convert_path_noop () { func_to_host_path_result=$1 } # end func_convert_path_noop # func_convert_path_msys_to_w32 ARG # Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_path_result. func_convert_path_msys_to_w32 () { $debug_cmd func_to_host_path_result=$1 if test -n "$1"; then # Remove leading and trailing path separator characters from ARG. MSYS # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; # and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result=$func_convert_core_msys_to_w32_result func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_msys_to_w32 # func_convert_path_cygwin_to_w32 ARG # Convert path ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_path_cygwin_to_w32 () { $debug_cmd func_to_host_path_result=$1 if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_cygwin_to_w32 # func_convert_path_nix_to_w32 ARG # Convert path ARG from *nix to w32 format. Requires a wine environment and # a working winepath. Returns result in func_to_host_file_result. func_convert_path_nix_to_w32 () { $debug_cmd func_to_host_path_result=$1 if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result=$func_convert_core_path_wine_to_w32_result func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_nix_to_w32 # func_convert_path_msys_to_cygwin ARG # Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_path_msys_to_cygwin () { $debug_cmd func_to_host_path_result=$1 if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_msys_to_w32_result" func_to_host_path_result=$func_cygpath_result func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_msys_to_cygwin # func_convert_path_nix_to_cygwin ARG # Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a # a wine environment, working winepath, and LT_CYGPATH set. Returns result in # func_to_host_file_result. func_convert_path_nix_to_cygwin () { $debug_cmd func_to_host_path_result=$1 if test -n "$1"; then # Remove leading and trailing path separator characters from # ARG. msys behavior is inconsistent here, cygpath turns them # into '.;' and ';.', and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" func_to_host_path_result=$func_cygpath_result func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_nix_to_cygwin # func_dll_def_p FILE # True iff FILE is a Windows DLL '.def' file. # Keep in sync with _LT_DLL_DEF_P in libtool.m4 func_dll_def_p () { $debug_cmd func_dll_def_p_tmp=`$SED -n \ -e 's/^[ ]*//' \ -e '/^\(;.*\)*$/d' \ -e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \ -e q \ "$1"` test DEF = "$func_dll_def_p_tmp" } # func_reorder_shared_lib_cache DIRS # Reorder the shared library cache by unconfiguring previous shared library cache # and configuring preferred search directories before previous search directories. # Previous shared library cache: /usr/lib /usr/local/lib # Preferred search directories: /tmp/testing # Reordered shared library cache: /tmp/testing /usr/lib /usr/local/lib func_reorder_shared_lib_cache () { $debug_cmd case $host_os in openbsd*) get_search_directories=`PATH="$PATH:/sbin" ldconfig -r | $GREP "search directories" | $SED "s#.*search directories:\ ##g"` func_convert_delimited_path "$get_search_directories" ':' '\ ' save_search_directories=$converted_path func_convert_delimited_path "$1" ':' '\ ' # Ensure directories exist for dir in $converted_path; do # Ensure each directory is an absolute path case $dir in /*) ;; *) func_error "Directory '$dir' is not an absolute path" exit $EXIT_FAILURE ;; esac # Ensure no trailing slashes func_stripname '' '/' "$dir" dir=$func_stripname_result if test -d "$dir"; then if test -n "$preferred_search_directories"; then preferred_search_directories="$preferred_search_directories $dir" else preferred_search_directories=$dir fi else func_error "Directory '$dir' does not exist" exit $EXIT_FAILURE fi done PATH="$PATH:/sbin" ldconfig -U $save_search_directories PATH="$PATH:/sbin" ldconfig -m $preferred_search_directories $save_search_directories get_search_directories=`PATH="$PATH:/sbin" ldconfig -r | $GREP "search directories" | $SED "s#.*search directories:\ ##g"` func_convert_delimited_path "$get_search_directories" ':' '\ ' reordered_search_directories=$converted_path $ECHO "Original: $save_search_directories" $ECHO "Reordered: $reordered_search_directories" exit $EXIT_SUCCESS ;; *) func_error "--reorder-cache is not supported for host_os=$host_os." exit $EXIT_FAILURE ;; esac } # end func_reorder_shared_lib_cache # func_mode_compile arg... func_mode_compile () { $debug_cmd # Get the compilation command and the source file. base_compile= srcfile=$nonopt # always keep a non-empty value in "srcfile" suppress_opt=yes suppress_output= arg_mode=normal libobj= later= pie_flag= for arg do case $arg_mode in arg ) # do not "continue". Instead, add this to base_compile lastarg=$arg arg_mode=normal ;; target ) libobj=$arg arg_mode=normal continue ;; normal ) # Accept any command-line options. case $arg in -o) test -n "$libobj" && \ func_fatal_error "you cannot specify '-o' more than once" arg_mode=target continue ;; -pie | -fpie | -fPIE) func_append pie_flag " $arg" continue ;; -shared | -static | -prefer-pic | -prefer-non-pic) func_append later " $arg" continue ;; -no-suppress) suppress_opt=no continue ;; -Xcompiler) arg_mode=arg # the next one goes into the "base_compile" arg list continue # The current "srcfile" will either be retained or ;; # replaced later. I would guess that would be a bug. -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result lastarg= save_ifs=$IFS; IFS=, for arg in $args; do IFS=$save_ifs func_append_quoted lastarg "$arg" done IFS=$save_ifs func_stripname ' ' '' "$lastarg" lastarg=$func_stripname_result # Add the arguments to base_compile. func_append base_compile " $lastarg" continue ;; *) # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # lastarg=$srcfile srcfile=$arg ;; esac # case $arg ;; esac # case $arg_mode # Aesthetically quote the previous argument. func_append_quoted base_compile "$lastarg" done # for arg case $arg_mode in arg) func_fatal_error "you must specify an argument for -Xcompile" ;; target) func_fatal_error "you must specify a target with '-o'" ;; *) # Get the name of the library object. test -z "$libobj" && { func_basename "$srcfile" libobj=$func_basename_result } ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo case $libobj in *.[cCFSifmso] | \ *.ada | *.adb | *.ads | *.asm | \ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) func_xform "$libobj" libobj=$func_xform_result ;; esac case $libobj in *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; *) func_fatal_error "cannot determine name of library object from '$libobj'" ;; esac func_infer_tag $base_compile for arg in $later; do case $arg in -shared) test yes = "$build_libtool_libs" \ || func_fatal_configuration "cannot build a shared library" build_old_libs=no continue ;; -static) build_libtool_libs=no build_old_libs=yes continue ;; -prefer-pic) pic_mode=yes continue ;; -prefer-non-pic) pic_mode=no continue ;; esac done func_quote_arg pretty "$libobj" test "X$libobj" != "X$func_quote_arg_result" \ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ && func_warning "libobj name '$libobj' may not contain shell special characters." func_dirname_and_basename "$obj" "/" "" objname=$func_basename_result xdir=$func_dirname_result lobj=$xdir$objdir/$objname test -z "$base_compile" && \ func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. if test yes = "$build_old_libs"; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" fi # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in cygwin* | mingw* | windows* | pw32* | os2* | cegcc*) pic_mode=default ;; esac if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c if test no = "$compiler_c_o"; then output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext lockfile=$output_obj.lock else output_obj= need_locks=no lockfile= fi # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test yes = "$need_locks"; then until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done elif test warn = "$need_locks"; then if test -f "$lockfile"; then $ECHO "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support '-c' and '-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi func_append removelist " $output_obj" $ECHO "$srcfile" > "$lockfile" fi $opt_dry_run || $RM $removelist func_append removelist " $lockfile" trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 srcfile=$func_to_tool_file_result func_quote_arg pretty "$srcfile" qsrcfile=$func_quote_arg_result # Only build a PIC object if we are building libtool libraries. if test yes = "$build_libtool_libs"; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile if test no != "$pic_mode"; then command="$base_compile $qsrcfile $pic_flag" else # Don't build PIC code command="$base_compile $qsrcfile" fi func_mkdir_p "$xdir$objdir" if test -z "$output_obj"; then # Place PIC objects in $objdir func_append command " -o $lobj" fi func_show_eval_locale "$command" \ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' if test warn = "$need_locks" && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support '-c' and '-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then func_show_eval '$MV "$output_obj" "$lobj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi # Allow error messages only from the first compilation. if test yes = "$suppress_opt"; then suppress_output=' >/dev/null 2>&1' fi fi # Only build a position-dependent object if we build old libraries. if test yes = "$build_old_libs"; then if test yes != "$pic_mode"; then # Don't build PIC code command="$base_compile $qsrcfile$pie_flag" else command="$base_compile $qsrcfile $pic_flag" fi if test yes = "$compiler_c_o"; then func_append command " -o $obj" fi # Suppress compiler output if we already did a PIC compilation. func_append command "$suppress_output" func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' if test warn = "$need_locks" && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support '-c' and '-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then func_show_eval '$MV "$output_obj" "$obj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi fi $opt_dry_run || { func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" # Unlock the critical section if it was locked if test no != "$need_locks"; then removelist=$lockfile $RM "$lockfile" fi } exit $EXIT_SUCCESS } $opt_help || { test compile = "$opt_mode" && func_mode_compile ${1+"$@"} } func_mode_help () { # We need to display help for each of the modes. case $opt_mode in "") # Generic help is extracted from the usage comments # at the start of this file. func_help ;; clean) $ECHO \ "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE (typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; compile) $ECHO \ "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -no-suppress do not suppress compiler output for multiple passes -prefer-pic try to build PIC objects only -prefer-non-pic try to build non-PIC objects only -shared do not build a '.o' file suitable for static linking -static only build a '.o' file suitable for static linking -Wc,FLAG -Xcompiler FLAG pass FLAG directly to the compiler COMPILE-COMMAND is a command to be used in creating a 'standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix '.c' with the library object suffix, '.lo'." ;; execute) $ECHO \ "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to '-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $ECHO \ "Usage: $progname [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the '--dry-run' option if you just want to see what would be executed." ;; install) $ECHO \ "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the 'install' or 'cp' program. The following components of INSTALL-COMMAND are treated specially: -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $ECHO \ "Usage: $progname [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible -bindir BINDIR specify path to binaries directory (for systems where libraries must be found in the PATH setting at runtime) -dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened -no-fast-install disable the fast-install mode -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -objectlist FILE use a list of object files found in FILE to specify objects -os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes) -precious-files-regex REGEX don't remove output files matching REGEX -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -shared only do dynamic linking of libtool libraries -shrext SUFFIX override the standard shared library file extension -static do not do any dynamic linking of uninstalled libtool libraries -static-libtool-libs do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] -weak LIBNAME declare that the target provides the LIBNAME interface -Wc,FLAG -Xcompiler FLAG pass linker-specific FLAG directly to the compiler -Wa,FLAG -Xassembler FLAG pass linker-specific FLAG directly to the assembler -Wl,FLAG -Xlinker FLAG pass linker-specific FLAG directly to the linker -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) All other options (arguments beginning with '-') are ignored. Every other argument is treated as a filename. Files ending in '.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in '.la', then a libtool library is created, only library objects ('.lo' files) may be specified, and '-rpath' is required, except when creating a convenience library. If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created using 'ar' and 'ranlib', or on Windows using 'lib'. If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $ECHO \ "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) func_fatal_help "invalid operation mode '$opt_mode'" ;; esac echo $ECHO "Try '$progname --help' for more information about other modes." } # Now that we've collected a possible --mode arg, show help if necessary if $opt_help; then if test : = "$opt_help"; then func_mode_help else { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do func_mode_help done } | $SED -n '1p; 2,$s/^Usage:/ or: /p' { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do echo func_mode_help done } | $SED '1d /^When reporting/,/^Report/{ H d } $x /information about other modes/d /more detailed .*MODE/d s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' fi exit $? fi # If option '--reorder-cache', reorder the shared library cache and exit. if $opt_reorder_cache; then func_reorder_shared_lib_cache $shared_lib_dirs fi # func_mode_execute arg... func_mode_execute () { $debug_cmd # The first argument is the command name. cmd=$nonopt test -z "$cmd" && \ func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. for file in $opt_dlopen; do test -f "$file" \ || func_fatal_help "'$file' is not a file" dir= case $file in *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "'$lib' is not a valid libtool archive" # Read the libtool library. dlname= library_names= func_source "$file" # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && \ func_warning "'$file' was not linked with '-export-dynamic'" continue fi func_dirname "$file" "" "." dir=$func_dirname_result if test -f "$dir/$objdir/$dlname"; then func_append dir "/$objdir" else if test ! -f "$dir/$dlname"; then func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'" fi fi ;; *.lo) # Just add the directory containing the .lo file. func_dirname "$file" "" "." dir=$func_dirname_result ;; *) func_warning "'-dlopen' is ignored for non-libtool libraries and objects" continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir=$absdir # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic=$magic # Check if any of the arguments is a wrapper script. args= for file do case $file in -* | *.la | *.lo ) ;; *) # Do a test to see if this is really a libtool program. if func_ltwrapper_script_p "$file"; then func_source "$file" # Transform arg to wrapped name. file=$progdir/$program elif func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" func_source "$func_ltwrapper_scriptname_result" # Transform arg to wrapped name. file=$progdir/$program fi ;; esac # Quote arguments (to preserve shell metacharacters). func_append_quoted args "$file" done if $opt_dry_run; then # Display what would be done. if test -n "$shlibpath_var"; then eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" echo "export $shlibpath_var" fi $ECHO "$cmd$args" exit $EXIT_SUCCESS else if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" fi # Restore saved environment variables for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${save_$lt_var+set}\" = set; then $lt_var=\$save_$lt_var; export $lt_var else $lt_unset $lt_var fi" done # Now prepare to actually exec the command. exec_cmd=\$cmd$args fi } test execute = "$opt_mode" && func_mode_execute ${1+"$@"} # func_mode_finish arg... func_mode_finish () { $debug_cmd libs= libdirs= admincmds= for opt in "$nonopt" ${1+"$@"} do if test -d "$opt"; then func_append libdirs " $opt" elif test -f "$opt"; then if func_lalib_unsafe_p "$opt"; then func_append libs " $opt" else func_warning "'$opt' is not a valid libtool archive" fi else func_fatal_error "invalid argument '$opt'" fi done if test -n "$libs"; then if test -n "$lt_sysroot"; then sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" else sysroot_cmd= fi # Remove sysroot references if $opt_dry_run; then for lib in $libs; do echo "removing references to $lt_sysroot and '=' prefixes from $lib" done else tmpdir=`func_mktempdir` for lib in $libs; do $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ > $tmpdir/tmp-la mv -f $tmpdir/tmp-la $lib done ${RM}r "$tmpdir" fi fi if test -n "$finish_cmds$finish_eval" && test -n "$libdirs" && $opt_finishing; then for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. func_execute_cmds "$finish_cmds" 'admincmds="$admincmds '"$cmd"'"' fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $opt_dry_run || eval "$cmds" || func_append admincmds " $cmds" fi done fi # Exit here if they wanted silent mode. $opt_quiet && exit $EXIT_SUCCESS if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then echo "----------------------------------------------------------------------" echo "Libraries have been installed in:" for libdir in $libdirs; do $ECHO " $libdir" done if test "false" = "$opt_finishing"; then echo echo "NOTE: finish_cmds were not executed during testing, so you must" echo "manually run ldconfig to add a given test directory, LIBDIR, to" echo "the search path for generated executables." fi echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" echo "specify the full pathname of the library, or use the '-LLIBDIR'" echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then echo " - add LIBDIR to the '$shlibpath_var' environment variable" echo " during execution" fi if test -n "$runpath_var"; then echo " - add LIBDIR to the '$runpath_var' environment variable" echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" $ECHO " - use the '$flag' linker flag" fi if test -n "$admincmds"; then $ECHO " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'" fi echo echo "See any operating system documentation about shared libraries for" case $host in solaris2.[6789]|solaris2.1[0-9]) echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" echo "pages." ;; *) echo "more information, such as the ld(1) and ld.so(8) manual pages." ;; esac echo "----------------------------------------------------------------------" fi exit $EXIT_SUCCESS } test finish = "$opt_mode" && func_mode_finish ${1+"$@"} # func_mode_install arg... func_mode_install () { $debug_cmd # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" || # Allow the use of GNU shtool's install command. case $nonopt in *shtool*) :;; *) false;; esac then # Aesthetically quote it. func_quote_arg pretty "$nonopt" install_prog="$func_quote_arg_result " arg=$1 shift else install_prog= arg=$nonopt fi # The real first argument should be the name of the installation program. # Aesthetically quote it. func_quote_arg pretty "$arg" func_append install_prog "$func_quote_arg_result" install_shared_prog=$install_prog case " $install_prog " in *[\\\ /]cp\ *) install_cp=: ;; *) install_cp=false ;; esac # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir=false stripme= no_mode=: for arg do arg2= if test -n "$dest"; then func_append files " $dest" dest=$arg continue fi case $arg in -d) isdir=: ;; -f) if $install_cp; then :; else prev=$arg fi ;; -g | -m | -o) prev=$arg ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then if test X-m = "X$prev" && test -n "$install_override_mode"; then arg2=$install_override_mode no_mode=false fi prev= else dest=$arg continue fi ;; esac # Aesthetically quote the argument. func_quote_arg pretty "$arg" func_append install_prog " $func_quote_arg_result" if test -n "$arg2"; then func_quote_arg pretty "$arg2" fi func_append install_shared_prog " $func_quote_arg_result" done test -z "$install_prog" && \ func_fatal_help "you must specify an install program" test -n "$prev" && \ func_fatal_help "the '$prev' option requires an argument" if test -n "$install_override_mode" && $no_mode; then if $install_cp; then :; else func_quote_arg pretty "$install_override_mode" func_append install_shared_prog " -m $func_quote_arg_result" fi fi if test -z "$files"; then if test -z "$dest"; then func_fatal_help "no file or destination specified" else func_fatal_help "you must specify a destination" fi fi # Strip any trailing slash from the destination. func_stripname '' '/' "$dest" dest=$func_stripname_result # Check to see that the destination is a directory. test -d "$dest" && isdir=: if $isdir; then destdir=$dest destname= else func_dirname_and_basename "$dest" "" "." destdir=$func_dirname_result destname=$func_basename_result # Not a directory, so check to see that there is only one file specified. set dummy $files; shift test "$#" -gt 1 && \ func_fatal_help "'$dest' is not a directory" fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do case $file in *.lo) ;; *) func_fatal_help "'$destdir' must be an absolute directory name" ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic=$magic staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case $file in *.$libext) # Do the static libraries later. func_append staticlibs " $file" ;; *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "'$file' is not a valid libtool archive" library_names= old_library= relink_command= func_source "$file" # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) func_append current_libdirs " $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) func_append future_libdirs " $libdir" ;; esac fi func_dirname "$file" "/" "" dir=$func_dirname_result func_append dir "$objdir" if test -n "$relink_command"; then # Strip any trailing slash from the destination. func_stripname '' '/' "$libdir" destlibdir=$func_stripname_result func_stripname '' '/' "$destdir" s_destdir=$func_stripname_result # Determine the prefix the user has applied to our future dir. inst_prefix_dir=`$ECHO "X$s_destdir" | $Xsed -e "s%$destlibdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that # are installed to the same prefix. # At present, this check doesn't affect windows .dll's that # are installed into $libdir/../bin (currently, that works fine) # but it's something to keep an eye on. test "$inst_prefix_dir" = "$destdir" && \ func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir" if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` else relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` fi func_warning "relinking '$file'" func_show_eval "$relink_command" \ 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"' fi # See the names of the shared library. set dummy $library_names; shift if test -n "$1"; then realname=$1 shift srcname=$realname test -n "$relink_command" && srcname=${realname}T # Install the shared library and build the symlinks. func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ 'exit $?' tstripme=$stripme case $host_os in cygwin* | mingw* | windows* | pw32* | cegcc*) case $realname in *.dll.a) tstripme= ;; esac ;; os2*) case $realname in *_dll.a) tstripme= ;; esac ;; esac if test -n "$tstripme" && test -n "$striplib"; then func_show_eval "$striplib $destdir/$realname" 'exit $?' fi if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. # Try 'ln -sf' first, because the 'ln' binary might depend on # the symlink we replace! Solaris /bin/ln does not understand -f, # so we also need to try rm && ln -s. for linkname do test "$linkname" != "$realname" \ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" done fi # Do each command in the postinstall commands. lib=$destdir/$realname func_execute_cmds "$postinstall_cmds" 'exit $?' fi # Install the pseudo-library for information purposes. func_basename "$file" name=$func_basename_result instname=$dir/${name}i func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. test -n "$old_library" && func_append staticlibs " $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile=$destdir/$destname else func_basename "$file" destfile=$func_basename_result destfile=$destdir/$destfile fi # Deduce the name of the destination old-style object file. case $destfile in *.lo) func_lo2o "$destfile" staticdest=$func_lo2o_result ;; *.$objext) staticdest=$destfile destfile= ;; *) func_fatal_help "cannot copy a libtool object to '$destfile'" ;; esac # Install the libtool object if requested. test -n "$destfile" && \ func_show_eval "$install_prog $file $destfile" 'exit $?' # Install the old object if enabled. if test yes = "$build_old_libs"; then # Deduce the name of the old-style object file. func_lo2o "$file" staticobj=$func_lo2o_result func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' fi exit $EXIT_SUCCESS ;; *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile=$destdir/$destname else func_basename "$file" destfile=$func_basename_result destfile=$destdir/$destfile fi # If the file is missing, and there is a .exe on the end, strip it # because it is most likely a libtool script we actually want to # install stripped_ext= case $file in *.exe) if test ! -f "$file"; then func_stripname '' '.exe' "$file" file=$func_stripname_result stripped_ext=.exe fi ;; esac # Do a test to see if this is really a libtool program. case $host in *cygwin* | *mingw* | *windows*) if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" wrapper=$func_ltwrapper_scriptname_result else func_stripname '' '.exe' "$file" wrapper=$func_stripname_result fi ;; *) wrapper=$file ;; esac if func_ltwrapper_script_p "$wrapper"; then notinst_deplibs= relink_command= func_source "$wrapper" # Check the variables that should have been set. test -z "$generated_by_libtool_version" && \ func_fatal_error "invalid libtool wrapper script '$wrapper'" finalize=: for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then func_source "$lib" fi libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'` if test -n "$libdir" && test ! -f "$libfile"; then func_warning "'$lib' has not been installed in '$libdir'" finalize=false fi done relink_command= func_source "$wrapper" outputname= if test no = "$fast_install" && test -n "$relink_command"; then $opt_dry_run || { if $finalize; then tmpdir=`func_mktempdir` func_basename "$file$stripped_ext" file=$func_basename_result outputname=$tmpdir/$file # Replace the output file specification. relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` $opt_quiet || { func_quote_arg expand,pretty "$relink_command" eval "func_echo $func_quote_arg_result" } if eval "$relink_command"; then : else func_error "error: relink '$file' with the above command before installing it" $opt_dry_run || ${RM}r "$tmpdir" continue fi file=$outputname else func_warning "cannot relink '$file'" fi } else # Install the binary that we compiled earlier. file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyway case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok ;; *.exe:*) destfile=$destfile.exe ;; *:*.exe) func_stripname '' '.exe' "$destfile" destfile=$func_stripname_result ;; esac ;; esac func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' $opt_dry_run || if test -n "$outputname"; then ${RM}r "$tmpdir" fi ;; esac done for file in $staticlibs; do func_basename "$file" name=$func_basename_result # Set up the ranlib parameters. oldlib=$destdir/$name func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 tool_oldlib=$func_to_tool_file_result func_show_eval "$install_prog \$file \$oldlib" 'exit $?' if test -n "$stripme" && test -n "$old_striplib"; then func_show_eval "$old_striplib $tool_oldlib" 'exit $?' fi # Do each command in the postinstall commands. func_execute_cmds "$old_postinstall_cmds" 'exit $?' done test -n "$future_libdirs" && \ func_warning "remember to run '$progname --finish$future_libdirs'" if test -n "$current_libdirs"; then # Maybe just do a dry run. $opt_dry_run && current_libdirs=" -n$current_libdirs" exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs' else exit $EXIT_SUCCESS fi } test install = "$opt_mode" && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p # Extract symbols from dlprefiles and create ${outputname}S.o with # a dlpreopen symbol table. func_generate_dlsyms () { $debug_cmd my_outputname=$1 my_originator=$2 my_pic_p=${3-false} my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'` my_dlsyms= if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then if test -n "$NM" && test -n "$global_symbol_pipe"; then my_dlsyms=${my_outputname}S.c else func_error "not configured to extract global symbols from dlpreopened files" fi fi if test -n "$my_dlsyms"; then case $my_dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. nlist=$output_objdir/$my_outputname.nm func_show_eval "$RM $nlist ${nlist}S ${nlist}T" # Parse the name list into a source file. func_verbose "creating $output_objdir/$my_dlsyms" $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ /* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */ /* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */ #ifdef __cplusplus extern \"C\" { #endif #if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) #pragma GCC diagnostic ignored \"-Wstrict-prototypes\" #endif /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE /* DATA imports from DLLs on WIN32 can't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST #elif defined __osf__ /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif #define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) /* External symbol declarations for the compiler. */\ " if test yes = "$dlself"; then func_verbose "generating symbol list for '$output'" $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` for progfile in $progfiles; do func_to_tool_file "$progfile" func_convert_file_msys_to_w32 func_verbose "extracting global C symbols from '$func_to_tool_file_result'" $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then $opt_dry_run || { eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi if test -n "$export_symbols_regex"; then $opt_dry_run || { eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi # Prepare the list of exported symbols if test -z "$export_symbols"; then export_symbols=$output_objdir/$outputname.exp $opt_dry_run || { $RM $export_symbols eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in *cygwin* | *mingw* | *windows* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ;; esac } else $opt_dry_run || { eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in *cygwin* | *mingw* | *windows* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; esac } fi fi for dlprefile in $dlprefiles; do func_verbose "extracting global C symbols from '$dlprefile'" func_basename "$dlprefile" name=$func_basename_result case $host in *cygwin* | *mingw* | *windows* | *cegcc* ) # if an import library, we need to obtain dlname if func_win32_import_lib_p "$dlprefile"; then func_tr_sh "$dlprefile" eval "curr_lafile=\$libfile_$func_tr_sh_result" dlprefile_dlbasename= if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then # Use subshell, to avoid clobbering current variable values dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` if test -n "$dlprefile_dlname"; then func_basename "$dlprefile_dlname" dlprefile_dlbasename=$func_basename_result else # no lafile. user explicitly requested -dlpreopen . $sharedlib_from_linklib_cmd "$dlprefile" dlprefile_dlbasename=$sharedlib_from_linklib_result fi fi $opt_dry_run || { if test -n "$dlprefile_dlbasename"; then eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' else func_warning "Could not compute DLL name from $name" eval '$ECHO ": $name " >> "$nlist"' fi func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 case $host in i[3456]86-*-mingw32*) eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" ;; *) eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/__nm_//' >> '$nlist'" ;; esac } else # not an import lib $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } fi ;; *) $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } ;; esac done $opt_dry_run || { # Make sure we have at least an empty file. test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $MV "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. if $GREP -v "^: " < "$nlist" | if sort -k 3 /dev/null 2>&1; then sort -k 3 else sort +2 fi | uniq > "$nlist"S; then : else $GREP -v "^: " < "$nlist" > "$nlist"S fi if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' else echo '/* NONE */' >> "$output_objdir/$my_dlsyms" fi func_show_eval '$RM "${nlist}I"' if test -n "$global_symbol_to_import"; then eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I' fi echo >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ typedef struct { const char *name; void *address; } lt_dlsymlist; extern LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[];\ " if test -s "$nlist"I; then echo >> "$output_objdir/$my_dlsyms" "\ static void lt_syminit(void) { LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols; for (; symbol->name; ++symbol) {" $SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms" echo >> "$output_objdir/$my_dlsyms" "\ } }" fi echo >> "$output_objdir/$my_dlsyms" "\ LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = { {\"$my_originator\", (void *) 0}," if test -s "$nlist"I; then echo >> "$output_objdir/$my_dlsyms" "\ {\"@INIT@\", (void *) <_syminit}," fi case $need_lib_prefix in no) eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; *) eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; esac echo >> "$output_objdir/$my_dlsyms" "\ {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt_${my_prefix}_LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif\ " } # !$opt_dry_run pic_flag_for_symtable= case "$compile_command " in *" -static "*) ;; *) case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; *-*-hpux*) pic_flag_for_symtable=" $pic_flag" ;; *) $my_pic_p && pic_flag_for_symtable=" $pic_flag" ;; esac ;; esac symtab_cflags= for arg in $LTCFLAGS; do case $arg in -pie | -fpie | -fPIE) ;; *) func_append symtab_cflags " $arg" ;; esac done # Now compile the dynamic symbol file. func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' # Clean up the generated files. func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"' # Transform the symbol file into the correct name. symfileobj=$output_objdir/${my_outputname}S.$objext case $host in *cygwin* | *mingw* | *windows* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` else compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` fi ;; *) compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` ;; esac ;; *) func_fatal_error "unknown suffix for '$my_dlsyms'" ;; esac else # We keep going just in case the user didn't refer to # lt_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. # Nullify the symbol file. compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` fi } # func_cygming_gnu_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is a GNU/binutils-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_gnu_implib_p () { $debug_cmd func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` test -n "$func_cygming_gnu_implib_tmp" } # func_cygming_ms_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is an MS-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_ms_implib_p () { $debug_cmd func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` test -n "$func_cygming_ms_implib_tmp" } # func_win32_libid arg # return the library type of file 'arg' # # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. # Despite the name, also deal with 64 bit binaries. func_win32_libid () { $debug_cmd win32_libid_type=unknown win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in *ar\ archive\ import\ library*) # definitely import win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64|pe-aarch64)' >/dev/null; then case $nm_interface in "MS dumpbin") if func_cygming_ms_implib_p "$1" || func_cygming_gnu_implib_p "$1" then win32_nmres=import else win32_nmres= fi ;; *) func_to_tool_file "$1" func_convert_file_msys_to_w32 win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | $SED -n -e ' 1,100{ / I /{ s|.*|import| p q } }'` ;; esac case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; esac fi ;; *DLL*) win32_libid_type="x86 DLL" ;; *executable*) # but shell scripts are "executable" too... case $win32_fileres in *MS\ Windows\ PE\ Intel*) win32_libid_type="x86 DLL" ;; esac ;; esac $ECHO "$win32_libid_type" } # func_cygming_dll_for_implib ARG # # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib () { $debug_cmd sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` } # func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs # # The is the core of a fallback implementation of a # platform-specific function to extract the name of the # DLL associated with the specified import library LIBNAME. # # SECTION_NAME is either .idata$6 or .idata$7, depending # on the platform and compiler that created the implib. # # Echos the name of the DLL associated with the # specified import library. func_cygming_dll_for_implib_fallback_core () { $debug_cmd match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` $OBJDUMP -s --section "$1" "$2" 2>/dev/null | $SED '/^Contents of section '"$match_literal"':/{ # Place marker at beginning of archive member dllname section s/.*/====MARK====/ p d } # These lines can sometimes be longer than 43 characters, but # are always uninteresting /:[ ]*file format pe[i]\{,1\}-/d /^In archive [^:]*:/d # Ensure marker is printed /^====MARK====/p # Remove all lines with less than 43 characters /^.\{43\}/!d # From remaining lines, remove first 43 characters s/^.\{43\}//' | $SED -n ' # Join marker and all lines until next marker into a single line /^====MARK====/ b para H $ b para b :para x s/\n//g # Remove the marker s/^====MARK====// # Remove trailing dots and whitespace s/[\. \t]*$// # Print /./p' | # we now have a list, one entry per line, of the stringified # contents of the appropriate section of all members of the # archive that possess that section. Heuristic: eliminate # all those that have a first or second character that is # a '.' (that is, objdump's representation of an unprintable # character.) This should work for all archives with less than # 0x302f exports -- but will fail for DLLs whose name actually # begins with a literal '.' or a single character followed by # a '.'. # # Of those that remain, print the first one. $SED -e '/^\./d;/^.\./d;q' } # func_cygming_dll_for_implib_fallback ARG # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # # This fallback implementation is for use when $DLLTOOL # does not support the --identify-strict option. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib_fallback () { $debug_cmd if func_cygming_gnu_implib_p "$1"; then # binutils import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` elif func_cygming_ms_implib_p "$1"; then # ms-generated import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` else # unknown sharedlib_from_linklib_result= fi } # func_extract_an_archive dir oldlib func_extract_an_archive () { $debug_cmd f_ex_an_ar_dir=$1; shift f_ex_an_ar_oldlib=$1 if test yes = "$lock_old_archive_extraction"; then lockfile=$f_ex_an_ar_oldlib.lock until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done fi func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ 'stat=$?; rm -f "$lockfile"; exit $stat' if test yes = "$lock_old_archive_extraction"; then $opt_dry_run || rm -f "$lockfile" fi if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" fi } # func_extract_archives gentop oldlib ... func_extract_archives () { $debug_cmd my_gentop=$1; shift my_oldlibs=${1+"$@"} my_oldobjs= my_xlib= my_xabs= my_xdir= for my_xlib in $my_oldlibs; do # Extract the objects. case $my_xlib in [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac func_basename "$my_xlib" my_xlib=$func_basename_result my_xlib_u=$my_xlib while :; do case " $extracted_archives " in *" $my_xlib_u "*) func_arith $extracted_serial + 1 extracted_serial=$func_arith_result my_xlib_u=lt$extracted_serial-$my_xlib ;; *) break ;; esac done extracted_archives="$extracted_archives $my_xlib_u" my_xdir=$my_gentop/$my_xlib_u func_mkdir_p "$my_xdir" case $host in *-darwin*) func_verbose "Extracting $my_xabs" # Do not bother doing anything if just a dry run $opt_dry_run || { darwin_orig_dir=`pwd` cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` func_basename "$darwin_archive" darwin_base_archive=$func_basename_result darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` if test -n "$darwin_arches"; then darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" for darwin_arch in $darwin_arches; do func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch" $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive" cd "unfat-$$/$darwin_base_archive-$darwin_arch" func_extract_an_archive "`pwd`" "$darwin_base_archive" cd "$darwin_curdir" $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" done # $darwin_arches ## Okay now we've a bunch of thin objects, gotta fatten them up :) darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u` darwin_file= darwin_files= for darwin_file in $darwin_filelist; do darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` $LIPO -create -output "$darwin_file" $darwin_files done # $darwin_filelist $RM -rf unfat-$$ cd "$darwin_orig_dir" else cd $darwin_orig_dir func_extract_an_archive "$my_xdir" "$my_xabs" fi # $darwin_arches } # !$opt_dry_run ;; *) func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` done func_extract_archives_result=$my_oldobjs } # func_emit_wrapper [arg=no] # # Emit a libtool wrapper script on stdout. # Don't directly open a file because we may want to # incorporate the script contents within a cygwin/mingw/windows # wrapper executable. Must ONLY be called from within # func_mode_link because it depends on a number of variables # set therein. # # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR # variable will take. If 'yes', then the emitted script # will assume that the directory where it is stored is # the $objdir directory. This is a cygwin/mingw/windows-specific # behavior. func_emit_wrapper () { func_emit_wrapper_arg1=${1-no} $ECHO "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname # Generated by $PROGRAM (GNU $PACKAGE) $VERSION # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of the build directory. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. sed_quote_subst='$sed_quote_subst' # Be Bourne compatible if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variables: generated_by_libtool_version='$macro_version' notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$ECHO are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then file=\"\$0\"" func_quote_arg pretty "$ECHO" qECHO=$func_quote_arg_result $ECHO "\ # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$1 _LTECHO_EOF' } ECHO=$qECHO fi # Very basic option parsing. These options are (a) specific to # the libtool wrapper, (b) are identical between the wrapper # /script/ and the wrapper /executable/ that is used only on # windows platforms, and (c) all begin with the string "--lt-" # (application programs are unlikely to have options that match # this pattern). # # There are only two supported options: --lt-debug and # --lt-dump-script. There is, deliberately, no --lt-help. # # The first argument to this parsing function should be the # script's $0 value, followed by "$@". lt_option_debug= func_parse_lt_options () { lt_script_arg0=\$0 shift for lt_opt do case \"\$lt_opt\" in --lt-debug) lt_option_debug=1 ;; --lt-dump-script) lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` cat \"\$lt_dump_D/\$lt_dump_F\" exit 0 ;; --lt-*) \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 exit 1 ;; esac done # Print the debug banner immediately: if test -n \"\$lt_option_debug\"; then echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2 fi } # Used when --lt-debug. Prints its arguments to stdout # (redirection is the responsibility of the caller) func_lt_dump_args () { lt_dump_args_N=1; for lt_arg do \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\" lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` done } # Core function for launching the target application func_exec_program_core () { " case $host in # Backslashes separate directories on plain windows *-*-mingw* | *-*-windows* | *-*-os2* | *-cegcc*) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} " ;; *) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir/\$program\" \${1+\"\$@\"} " ;; esac $ECHO "\ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 exit 1 } # A function to encapsulate launching the target application # Strips options in the --lt-* namespace from \$@ and # launches target application with the remaining arguments. func_exec_program () { case \" \$* \" in *\\ --lt-*) for lt_wr_arg do case \$lt_wr_arg in --lt-*) ;; *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; esac shift done ;; esac func_exec_program_core \${1+\"\$@\"} } # Parse options func_parse_lt_options \"\$0\" \${1+\"\$@\"} # Find the directory that this script lives in. thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` done # Usually 'no', except on cygwin/mingw/windows when embedded into # the cwrapper. WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then # special case for '.' if test \"\$thisdir\" = \".\"; then thisdir=\`pwd\` fi # remove .libs from thisdir case \"\$thisdir\" in *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; $objdir ) thisdir=. ;; esac fi # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" " if test yes = "$fast_install"; then $ECHO "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" if test ! -d \"\$progdir\"; then $MKDIR \"\$progdir\" else $RM \"\$progdir/\$file\" fi" $ECHO "\ # relink executable if necessary if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else \$ECHO \"\$relink_command_output\" >&2 $RM \"\$progdir/\$file\" exit 1 fi fi $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || { $RM \"\$progdir/\$program\"; $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } $RM \"\$progdir/\$file\" fi" else $ECHO "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi $ECHO "\ if test -f \"\$progdir/\$program\"; then" # fixup the dll searchpath if we need to. # # Fix the DLL searchpath if we need to. Do this before prepending # to shlibpath, because on Windows, both are PATH and uninstalled # libraries must come first. if test -n "$dllsearchpath"; then $ECHO "\ # Add the dll search path components to the executable PATH PATH=$dllsearchpath:\$PATH " fi # Export our shlibpath_var if we have one. if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` export $shlibpath_var " fi $ECHO "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. func_exec_program \${1+\"\$@\"} fi else # The program doesn't exist. \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi fi\ " } # func_emit_cwrapperexe_src # emit the source code for a wrapper executable on stdout # Must ONLY be called from within func_mode_link because # it depends on a number of variable set therein. func_emit_cwrapperexe_src () { cat < #include #if defined _WIN32 && !defined __GNUC__ # include # include # include #else # include # include # ifdef __CYGWIN__ # include # endif #endif #include #include #include #include #include #include #include #include #define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) /* declarations of non-ANSI functions */ #if defined __MINGW32__ # ifdef __STRICT_ANSI__ _CRTIMP int __cdecl _putenv (const char *); # endif #elif defined __CYGWIN__ # ifdef __STRICT_ANSI__ char *realpath (const char *, char *); int putenv (char *); int setenv (const char *, const char *, int); # endif /* #elif defined other_platform || defined ... */ #endif /* portability defines, excluding path handling macros */ #if defined _MSC_VER # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv # define S_IXUSR _S_IEXEC #elif defined __MINGW32__ # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv #elif defined __CYGWIN__ # define HAVE_SETENV # define FOPEN_WB "wb" /* #elif defined other platforms ... */ #endif #if defined PATH_MAX # define LT_PATHMAX PATH_MAX #elif defined MAXPATHLEN # define LT_PATHMAX MAXPATHLEN #else # define LT_PATHMAX 1024 #endif #ifndef S_IXOTH # define S_IXOTH 0 #endif #ifndef S_IXGRP # define S_IXGRP 0 #endif /* path handling portability macros */ #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' #endif #if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \ defined __OS2__ # define HAVE_DOS_BASED_FILE_SYSTEM # define FOPEN_WB "wb" # ifndef DIR_SEPARATOR_2 # define DIR_SEPARATOR_2 '\\' # endif # ifndef PATH_SEPARATOR_2 # define PATH_SEPARATOR_2 ';' # endif #endif #ifndef DIR_SEPARATOR_2 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) #else /* DIR_SEPARATOR_2 */ # define IS_DIR_SEPARATOR(ch) \ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) #endif /* DIR_SEPARATOR_2 */ #ifndef PATH_SEPARATOR_2 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) #else /* PATH_SEPARATOR_2 */ # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ #ifndef FOPEN_WB # define FOPEN_WB "w" #endif #ifndef _O_BINARY # define _O_BINARY 0 #endif #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ if (stale) { free (stale); stale = 0; } \ } while (0) #if defined LT_DEBUGWRAPPER static int lt_debug = 1; #else static int lt_debug = 0; #endif const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ void *xmalloc (size_t num); char *xstrdup (const char *string); const char *base_name (const char *name); char *find_executable (const char *wrapper); char *chase_symlinks (const char *pathspec); int make_executable (const char *path); int check_executable (const char *path); char *strendzap (char *str, const char *pat); void lt_debugprintf (const char *file, int line, const char *fmt, ...); void lt_fatal (const char *file, int line, const char *message, ...); static const char *nonnull (const char *s); static const char *nonempty (const char *s); void lt_setenv (const char *name, const char *value); char *lt_extend_str (const char *orig_value, const char *add, int to_end); void lt_update_exe_path (const char *name, const char *value); void lt_update_lib_path (const char *name, const char *value); char **prepare_spawn (char **argv); void lt_dump_script (FILE *f); EOF cat <= 0) && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) return 1; else return 0; } int make_executable (const char *path) { int rval = 0; struct stat st; lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", nonempty (path)); if ((!path) || (!*path)) return 0; if (stat (path, &st) >= 0) { rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); } return rval; } /* Searches for the full path of the wrapper. Returns newly allocated full path name if found, NULL otherwise Does not chase symlinks, even on platforms that support them. */ char * find_executable (const char *wrapper) { int has_slash = 0; const char *p; const char *p_next; /* static buffer for getcwd */ char tmp[LT_PATHMAX + 1]; size_t tmp_len; char *concat_name; lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", nonempty (wrapper)); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; /* Absolute path? */ #if defined HAVE_DOS_BASED_FILE_SYSTEM if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } else { #endif if (IS_DIR_SEPARATOR (wrapper[0])) { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } #if defined HAVE_DOS_BASED_FILE_SYSTEM } #endif for (p = wrapper; *p; p++) if (*p == '/') { has_slash = 1; break; } if (!has_slash) { /* no slashes; search PATH */ const char *path = getenv ("PATH"); if (path != NULL) { for (p = path; *p; p = p_next) { const char *q; size_t p_len; for (q = p; *q; q++) if (IS_PATH_SEPARATOR (*q)) break; p_len = (size_t) (q - p); p_next = (*q == '\0' ? q : q + 1); if (p_len == 0) { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); } else { concat_name = XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, p, p_len); concat_name[p_len] = '/'; strcpy (concat_name + p_len + 1, wrapper); } if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } } /* not found in PATH; assume curdir */ } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); return NULL; } char * chase_symlinks (const char *pathspec) { #ifndef S_ISLNK return xstrdup (pathspec); #else char buf[LT_PATHMAX]; struct stat s; char *tmp_pathspec = xstrdup (pathspec); char *p; int has_symlinks = 0; while (strlen (tmp_pathspec) && !has_symlinks) { lt_debugprintf (__FILE__, __LINE__, "checking path component for symlinks: %s\n", tmp_pathspec); if (lstat (tmp_pathspec, &s) == 0) { if (S_ISLNK (s.st_mode) != 0) { has_symlinks = 1; break; } /* search backwards for last DIR_SEPARATOR */ p = tmp_pathspec + strlen (tmp_pathspec) - 1; while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) p--; if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) { /* no more DIR_SEPARATORS left */ break; } *p = '\0'; } else { lt_fatal (__FILE__, __LINE__, "error accessing file \"%s\": %s", tmp_pathspec, nonnull (strerror (errno))); } } XFREE (tmp_pathspec); if (!has_symlinks) { return xstrdup (pathspec); } tmp_pathspec = realpath (pathspec, buf); if (tmp_pathspec == 0) { lt_fatal (__FILE__, __LINE__, "could not follow symlinks for %s", pathspec); } return xstrdup (tmp_pathspec); #endif } char * strendzap (char *str, const char *pat) { size_t len, patlen; assert (str != NULL); assert (pat != NULL); len = strlen (str); patlen = strlen (pat); if (patlen <= len) { str += len - patlen; if (STREQ (str, pat)) *str = '\0'; } return str; } void lt_debugprintf (const char *file, int line, const char *fmt, ...) { va_list args; if (lt_debug) { (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); va_start (args, fmt); (void) vfprintf (stderr, fmt, args); va_end (args); } } static void lt_error_core (int exit_status, const char *file, int line, const char *mode, const char *message, va_list ap) { fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); if (exit_status >= 0) exit (exit_status); } void lt_fatal (const char *file, int line, const char *message, ...) { va_list ap; va_start (ap, message); lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); va_end (ap); } static const char * nonnull (const char *s) { return s ? s : "(null)"; } static const char * nonempty (const char *s) { return (s && !*s) ? "(empty)" : nonnull (s); } void lt_setenv (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_setenv) setting '%s' to '%s'\n", nonnull (name), nonnull (value)); { #ifdef HAVE_SETENV /* always make a copy, for consistency with !HAVE_SETENV */ char *str = xstrdup (value); setenv (name, str, 1); #else size_t len = strlen (name) + 1 + strlen (value) + 1; char *str = XMALLOC (char, len); sprintf (str, "%s=%s", name, value); if (putenv (str) != EXIT_SUCCESS) { XFREE (str); } #endif } } char * lt_extend_str (const char *orig_value, const char *add, int to_end) { char *new_value; if (orig_value && *orig_value) { size_t orig_value_len = strlen (orig_value); size_t add_len = strlen (add); new_value = XMALLOC (char, add_len + orig_value_len + 1); if (to_end) { strcpy (new_value, orig_value); strcpy (new_value + orig_value_len, add); } else { strcpy (new_value, add); strcpy (new_value + add_len, orig_value); } } else { new_value = xstrdup (add); } return new_value; } void lt_update_exe_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); /* some systems can't cope with a ':'-terminated path #' */ size_t len = strlen (new_value); while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1])) { new_value[--len] = '\0'; } lt_setenv (name, new_value); XFREE (new_value); } } void lt_update_lib_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); lt_setenv (name, new_value); XFREE (new_value); } } EOF case $host_os in mingw* | windows*) cat <<"EOF" /* Prepares an argument vector before calling spawn(). Note that spawn() does not by itself call the command interpreter (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); GetVersionEx(&v); v.dwPlatformId == VER_PLATFORM_WIN32_NT; }) ? "cmd.exe" : "command.com"). Instead it simply concatenates the arguments, separated by ' ', and calls CreateProcess(). We must quote the arguments since Win32 CreateProcess() interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a special way: - Space and tab are interpreted as delimiters. They are not treated as delimiters if they are surrounded by double quotes: "...". - Unescaped double quotes are removed from the input. Their only effect is that within double quotes, space and tab are treated like normal characters. - Backslashes not followed by double quotes are not special. - But 2*n+1 backslashes followed by a double quote become n backslashes followed by a double quote (n >= 0): \" -> " \\\" -> \" \\\\\" -> \\" */ #define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" #define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" char ** prepare_spawn (char **argv) { size_t argc; char **new_argv; size_t i; /* Count number of arguments. */ for (argc = 0; argv[argc] != NULL; argc++) ; /* Allocate new argument vector. */ new_argv = XMALLOC (char *, argc + 1); /* Put quoted arguments into the new argument vector. */ for (i = 0; i < argc; i++) { const char *string = argv[i]; if (string[0] == '\0') new_argv[i] = xstrdup ("\"\""); else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) { int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); size_t length; unsigned int backslashes; const char *s; char *quoted_string; char *p; length = 0; backslashes = 0; if (quote_around) length++; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') length += backslashes + 1; length++; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) length += backslashes + 1; quoted_string = XMALLOC (char, length + 1); p = quoted_string; backslashes = 0; if (quote_around) *p++ = '"'; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') { unsigned int j; for (j = backslashes + 1; j > 0; j--) *p++ = '\\'; } *p++ = c; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) { unsigned int j; for (j = backslashes; j > 0; j--) *p++ = '\\'; *p++ = '"'; } *p = '\0'; new_argv[i] = quoted_string; } else new_argv[i] = (char *) string; } new_argv[argc] = NULL; return new_argv; } EOF ;; esac cat <<"EOF" void lt_dump_script (FILE* f) { EOF func_emit_wrapper yes | $SED -n -e ' s/^\(.\{79\}\)\(..*\)/\1\ \2/ h s/\([\\"]\)/\\\1/g s/$/\\n/ s/\([^\n]*\).*/ fputs ("\1", f);/p g D' cat <<"EOF" } EOF } # end: func_emit_cwrapperexe_src # func_win32_import_lib_p ARG # True if ARG is an import lib, as indicated by $file_magic_cmd func_win32_import_lib_p () { $debug_cmd case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in *import*) : ;; *) false ;; esac } # func_suncc_cstd_abi # !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!! # Several compiler flags select an ABI that is incompatible with the # Cstd library. Avoid specifying it if any are in CXXFLAGS. func_suncc_cstd_abi () { $debug_cmd case " $compile_command " in *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*) suncc_use_cstd_abi=no ;; *) suncc_use_cstd_abi=yes ;; esac } # func_mode_link arg... func_mode_link () { $debug_cmd case $host in *-*-cygwin* | *-*-mingw* | *-*-windows* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # what system we are compiling for in order to pass an extra # flag for every libtool invocation. # allow_undefined=no # FIXME: Unfortunately, there are problems with the above when trying # to make a dll that has undefined symbols, in which case not # even a static library is built. For now, we need to specify # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. allow_undefined=yes ;; *) allow_undefined=yes ;; esac libtool_args=$nonopt base_compile="$nonopt $@" compile_command=$nonopt finalize_command=$nonopt compile_rpath= compile_rpath_tail= finalize_rpath= compile_shlibpath= finalize_shlibpath= convenience= old_convenience= deplibs= old_deplibs= compiler_flags= linker_flags= dllsearchpath= lib_search_path=`pwd` inst_prefix_dir= new_inherited_linker_flags= avoid_version=no bindir= dlfiles= dlprefiles= dlself=no export_dynamic=no export_symbols= export_symbols_regex= generated= libobjs= ltlibs= module=no no_install=no objs= os2dllname= non_pic_objects= precious_files_regex= prefer_static_libs=no preload=false prev= prevarg= release= rpath= xrpath= perm_rpath= temp_rpath= temp_rpath_tail= thread_safe=no vinfo= vinfo_number=no weak_libs= rpath_arg= single_module=$wl-single_module func_infer_tag $base_compile # We need to know -static, to get the right output filenames. for arg do case $arg in -shared) test yes != "$build_libtool_libs" \ && func_fatal_configuration "cannot build a shared library" build_old_libs=no break ;; -all-static | -static | -static-libtool-libs) case $arg in -all-static) if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then func_warning "complete static linking is impossible in this configuration" fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; -static) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=built ;; -static-libtool-libs) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; esac build_libtool_libs=no build_old_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. while test "$#" -gt 0; do arg=$1 shift func_quote_arg pretty,unquoted "$arg" qarg=$func_quote_arg_unquoted_result func_append libtool_args " $func_quote_arg_result" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) func_append compile_command " @OUTPUT@" func_append finalize_command " @OUTPUT@" ;; esac case $prev in bindir) bindir=$arg prev= continue ;; dlfiles|dlprefiles) $preload || { # Add the symbol object into the linking commands. func_append compile_command " @SYMFILE@" func_append finalize_command " @SYMFILE@" preload=: } case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test no = "$dlself"; then dlself=needless export_dynamic=yes fi prev= continue ;; self) if test dlprefiles = "$prev"; then dlself=yes elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then dlself=yes else dlself=needless export_dynamic=yes fi prev= continue ;; *) if test dlfiles = "$prev"; then func_append dlfiles " $arg" else func_append dlprefiles " $arg" fi prev= continue ;; esac ;; expsyms) export_symbols=$arg test -f "$arg" \ || func_fatal_error "symbol file '$arg' does not exist" prev= continue ;; expsyms_regex) export_symbols_regex=$arg prev= continue ;; framework) case $host in *-*-darwin*) case "$deplibs " in *" $qarg.ltframework "*) ;; *) func_append deplibs " $qarg.ltframework" # this is fixed later ;; esac ;; esac prev= continue ;; inst_prefix) inst_prefix_dir=$arg prev= continue ;; mllvm) # Clang does not use LLVM to link, so we can simply discard any # '-mllvm $arg' options when doing the link step. prev= continue ;; objectlist) if test -f "$arg"; then save_arg=$arg moreargs= for fil in `cat "$save_arg"` do # func_append moreargs " $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test none = "$pic_object" && test none = "$non_pic_object"; then func_fatal_error "cannot find name of object for '$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir=$func_dirname_result if test none != "$pic_object"; then # Prepend the subdirectory the object is found in. pic_object=$xdir$pic_object if test dlfiles = "$prev"; then if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then func_append dlfiles " $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test dlprefiles = "$prev"; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg=$pic_object fi # Non-PIC object. if test none != "$non_pic_object"; then # Prepend the subdirectory the object is found in. non_pic_object=$xdir$non_pic_object # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test none = "$pic_object"; then arg=$non_pic_object fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object=$pic_object func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir=$func_dirname_result func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "'$arg' is not a valid libtool object" fi fi done else func_fatal_error "link input file '$arg' does not exist" fi arg=$save_arg prev= continue ;; os2dllname) os2dllname=$arg prev= continue ;; precious_regex) precious_files_regex=$arg prev= continue ;; release) release=-$arg prev= continue ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) func_fatal_error "argument to -rpath is not absolute: $arg" ;; esac if test rpath = "$prev"; then case "$rpath " in *" $arg "*) ;; *) func_append rpath " $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; *) func_append xrpath " $arg" ;; esac fi prev= continue ;; shrext) shrext_cmds=$arg prev= continue ;; weak) func_append weak_libs " $arg" prev= continue ;; xassembler) func_append compiler_flags " -Xassembler $qarg" prev= func_append compile_command " -Xassembler $qarg" func_append finalize_command " -Xassembler $qarg" continue ;; xcclinker) func_append linker_flags " $qarg" func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xcompiler) func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xlinker) func_append linker_flags " $qarg" func_append compiler_flags " $wl$qarg" prev= func_append compile_command " $wl$qarg" func_append finalize_command " $wl$qarg" continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi # test -n "$prev" prevarg=$arg case $arg in -all-static) if test -n "$link_static_flag"; then # See comment for -static flag below, for more details. func_append compile_command " $link_static_flag" func_append finalize_command " $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. func_fatal_error "'-allow-undefined' must not be used because it is the default" ;; -avoid-version) avoid_version=yes continue ;; -bindir) prev=bindir continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) export_dynamic=yes continue ;; -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then func_fatal_error "more than one -exported-symbols argument is not allowed" fi if test X-export-symbols = "X$arg"; then prev=expsyms else prev=expsyms_regex fi continue ;; -framework) prev=framework continue ;; -inst-prefix-dir) prev=inst_prefix continue ;; # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix* | /*-*-irix*) func_append compile_command " $arg" func_append finalize_command " $arg" ;; esac continue ;; -L*) func_stripname "-L" '' "$arg" if test -z "$func_stripname_result"; then if test "$#" -gt 0; then func_fatal_error "require no space between '-L' and '$1'" else func_fatal_error "need path for '-L' option" fi fi func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` test -z "$absdir" && \ func_fatal_error "cannot determine absolute directory name of '$dir'" dir=$absdir ;; esac case "$deplibs " in *" -L$dir "* | *" $arg "*) # Will only happen for absolute or sysroot arguments ;; *) # Preserve sysroot, but never include relative directories case $dir in [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; *) func_append deplibs " -L$dir" ;; esac func_append lib_search_path " $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-windows* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; ::) dllsearchpath=$dir;; *) func_append dllsearchpath ":$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) func_append dllsearchpath ":$testbindir";; esac ;; esac continue ;; -l*) if test X-lc = "X$arg" || test X-lm = "X$arg"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-windows* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) # These systems don't actually have a C or math library (as such) continue ;; *-*-os2*) # These systems don't actually have a C library (as such) test X-lc = "X$arg" && continue ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-midnightbsd*) # Do not include libc due to us having libc/libc_r. test X-lc = "X$arg" && continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework func_append deplibs " System.ltframework" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype test X-lc = "X$arg" && continue ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work test X-lc = "X$arg" && continue ;; esac elif test X-lc_r = "X$arg"; then case $host in *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-midnightbsd*) # Do not include libc_r directly, use -pthread flag. continue ;; esac fi func_append deplibs " $arg" continue ;; -mllvm) prev=mllvm continue ;; -module) module=yes continue ;; # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. # Darwin uses the -arch flag to determine output architecture. # -q